summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/display
AgeCommit message (Collapse)Author
12 daysMerge tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main pull request for the drm subsystems for 6.10. In drivers the main thing is a new driver for ARM Mali firmware based GPUs, otherwise there are a lot of changes to amdgpu/xe/i915/msm and scattered changes to everything else. In the core a bunch of headers and Kconfig was refactored, along with the addition of a new panic handler which is meant to provide a user friendly message when a panic happens and graphical display is enabled. New drivers: - panthor: ARM Mali/Immortalis CSF-based GPU driver Core: - add a CONFIG_DRM_WERROR option - make more headers self-contained - grab resv lock in pin/unpin - fix vmap resv locking - EDID/eDP panel matching - Kconfig cleanups - DT sound bindings - Add SIZE_HINTS property for cursor planes - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - drop seq_file.h from a bunch of places - use drm_edid driver conversions dp: - DP Tunnel documentation - MST read sideband cap - Adaptive sync SDP prep work ttm: - improve placement for TTM BOs in idle/busy handling panic: - Fixes for drm-panic, and option to test it. - Add drm panic to simpledrm, mgag200, imx, ast bridge: - improve init ordering - adv7511: allow GPIO pin sharing - tc358775: add tc358675 support panel: - AUO B120XAN01.0 - Samsung s6e3fa7 - BOE NT116WHM-N44 - CMN N116BCA-EA1, - CrystalClear CMT430B19N00 - Startek KD050HDFIA020-C020A - powertip PH128800T006-ZHC01 - Innolux G121X1-L03 - LG sw43408 - Khadas TS050 V2 - EDO RM69380 OLED - CSOT MNB601LS1-1 amdgpu: - HDCP/ODM/RAS fixes - Devcoredump improvements - Expose VCN activity via sysfs - SMY 13.0.x updates - Enable fast updates on DCN 3.1.4 - Add dclk and vclk reporting on additional devices - Add ACA RAS infrastructure - Implement TLB flush fence - EEPROM handling fixes - SMUIO 14.0.2 support - SMU 14.0.1 Updates - SMU 14.0.2 support - Sync page table freeing with TLB flushes - DML2 refactor - DC debug improvements - DCN 3.5.x Updates - GPU reset fixes - HDP fix for second GFX pipe on GC 10.x - Enable secondary GFX pipe on GC 10.3 - Refactor and clean up BACO/BOCO/BAMACO handling - Remove invalid TTM resource start check - UAF fix in VA IOCTL - GPUVM page fault redirection to secondary IH rings for IH 6.x - Initial support for mapping kernel queues via MES - Fix VRAM memory accounting amdkfd: - MQD handling cleanup - Preemption handling fixes for XCDs - TLB flush fix for GC 9.4.2 - Properly clean up workqueue during module unload - Fix memory leak process create failure - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace - Fix eviction fence handling - Fix leak in GPU memory allocation failure case - DMABuf import handling fix - Enable SQ watchpoint for gfx10 i915: - Adding new DG2 PCI ID - add context hints for GT frequency - enable only one CCS for compute workloads - new workarounds - Fix UAF on destroy against retire race and remove two earlier partial fixes - Limit the reserved VM space to only the platforms that need it - Fix gt reset with GuC submission is disable - Add and use gt_to_guc() wrapper i915/xe display: - Lunar Lake display enabling, including cdclk and other refactors - BIOS/VBT/opregion related refactor - Digital port related refactor/clean-up - Fix 2s boot time regression on DP panel replay init - Remove duplication on audio enable/disable on SDVO and g4x+ DP - Disable AuxCCS framebuffers if built for Xe - Make crtc disable more atomic - Increase DP idle pattern wait timeout to 2ms - Start using container_of_const() for some extra const safety - Fix Jasper Lake boot freeze - Enable MST mode for 128b/132b single-stream sideband - Enable Adaptive Sync SDP Support for DP - Fix MTL supported DP rates - removal of UHBR13.5 - PLL refactoring - Limit eDP MSO pipe only for display version 20 - More display refactor towards independence from i915 dev_priv - Convert i915/xe fbdev to DRM client - More initial work to make display code more independent from i915 xe: - improved error capture - clean up some uAPI leftovers - devcoredump update - Add BMG mocs table - Handle GSCCS ER interrupt - Implement xe2- and GuC workarounds - struct xe_device cleanup - Hwmon updates - Add LRC parsing for more GPU instruction - Increase VM_BIND number of per-ioctl Ops - drm/xe: Add XE_BO_GGTT_INVALIDATE flag - Initial development for SR-IOV support - Add new PCI IDs to DG2 platform - Move userptr over to start using hmm_range_fault msm: - Switched to generating register header files during build process instead of shipping pre-generated headers - Merged DPU and MDP4 format databases. - DP: - Stop using compat string to distinguish DP and eDP cases - Added support for X Elite platform (X1E80100) - Reworked DP aux/audio support - Added SM6350 DP to the bindings - GPU: - a7xx perfcntr reg fixes - MAINTAINERS updates - a750 devcoredump support radeon: - Silence UBSAN warnings related to flexible arrays nouveau: - move some uAPI objects to uapi headers omapdrm: - console fix ast: - add i2c polling qaic: - add debugfs entries exynos: - fix platform_driver .owner - drop cleanup code mediatek: - Use devm_platform_get_and_ioremap_resource() in mtk_hdmi_ddc_probe() - Add GAMMA 12-bit LUT support for MT8188 - Rename mtk_drm_* to mtk_* - Drop driver owner initialization - Correct calculation formula of PHY Timing" * tag 'drm-next-2024-05-15' of https://gitlab.freedesktop.org/drm/kernel: (1477 commits) drm/xe/ads: Use flexible-array drm/xe: Use ordered WQ for G2H handler drm/msm/gen_header: allow skipping the validation drm/msm/a6xx: Cleanup indexed regs const'ness drm/msm: Add devcoredump support for a750 drm/msm: Adjust a7xx GBIF debugbus dumping drm/msm: Update a6xx registers XML drm/msm: Fix imported a750 snapshot header for upstream drm/msm: Import a750 snapshot registers from kgsl MAINTAINERS: Add Konrad Dybcio as a reviewer for the Adreno driver MAINTAINERS: Add a separate entry for Qualcomm Adreno GPU drivers drm/msm/a6xx: Avoid a nullptr dereference when speedbin setting fails drm/msm/adreno: fix CP cycles stat retrieval on a7xx drm/msm/a7xx: allow writing to CP_BV counter selection registers drm: zynqmp_dpsub: Always register bridge Revert "drm/bridge: ti-sn65dsi83: Fix enable error path" drm/fb_dma: Add checks in drm_fb_dma_get_scanout_buffer() drm/fbdev-generic: Do not set physical framebuffer address drm/panthor: Fix the FW reset logic drm/panthor: Make sure we handle 'unknown group state' case properly ...
2024-05-07drm/i915/bios: Fix parsing backlight BDB dataKarthikeyan Ramasubramanian
Starting BDB version 239, hdr_dpcd_refresh_timeout is introduced to backlight BDB data. Commit 700034566d68 ("drm/i915/bios: Define more BDB contents") updated the backlight BDB data accordingly. This broke the parsing of backlight BDB data in VBT for versions 236 - 238 (both inclusive) and hence the backlight controls are not responding on units with the concerned BDB version. backlight_control information has been present in backlight BDB data from at least BDB version 191 onwards, if not before. Hence this patch extracts the backlight_control information for BDB version 191 or newer. Tested on Chromebooks using Jasperlake SoC (reports bdb->version = 236). Tested on Chromebooks using Raptorlake SoC (reports bdb->version = 251). v2: removed checking the block size of the backlight BDB data [vsyrjala: this is completely safe thanks to commit e163cfb4c96d ("drm/i915/bios: Make copies of VBT data blocks")] Fixes: 700034566d68 ("drm/i915/bios: Define more BDB contents") Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@chromium.org> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240221180622.v2.1.I0690aa3e96a83a43b3fc33f50395d334b2981826@changeid Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> (cherry picked from commit c286f6a973c66c0d993ecab9f7162c790e7064c8) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-05-06drm/i915/audio: Fix audio time stamp programming for DPChaitanya Kumar Borah
Intel hardware is capable of programming the Maud/Naud SDPs on its own based on real-time clocks. While doing so, it takes care of any deviations from the theoretical values. Programming the registers explicitly with static values can interfere with this logic. Therefore, let the HW decide the Maud and Naud SDPs on it's own. Cc: stable@vger.kernel.org # v5.17 Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8097 Co-developed-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Animesh Manna <animesh.manna@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240430091825.733499-1-chaitanya.kumar.borah@intel.com (cherry picked from commit 8e056b50d92ae7f4d6895d1c97a69a2a953cf97b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2024-05-02Merge tag 'drm-intel-next-2024-04-30' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next Core DRM: - Export drm_client_dev_unregister (Thomas Zimmermann) Display i915: - More initial work to make display code more independent from i915 (Jani) - Convert i915/xe fbdev to DRM client (Thomas Zimmermann) - VLV/CHV DPIO register cleanup (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZjFPcSCTd_5c0XU_@intel.com
2024-04-30drm/i915/dpio: Extract vlv_dpio_phy_regs.hVille Syrjälä
Pull the VLV/CHV DPIO PHY sideband registers to their own file. v2: drop stray tabs (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-15-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Clean up the vlv/chv PHY register bitsVille Syrjälä
Use REG_BIT() & co. for the vlv/chv DPIO PHY registers. Note that DPIO_BIAS_CURRENT_CTL_SHIFT was incorrectly defined to be 21 wheres 20 is the correct value. It is not used in the code though so didn't bother splitting to a separate patch. v2: drop stray tabs (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-14-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Clean up VLV/CHV DPIO PHY register definesVille Syrjälä
The DPIO PHY registers follow clear numbering rules. Express those in a few macros to get rid of the hand calculated final offsets. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-13-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Rename a few CHV DPIO PHY registersVille Syrjälä
Drop the leading underscore from the CHV PHY common lane register definitions. We use these directly from actual code so the underscore here is misleading as usually it indicates an intermediate define that shouldn't be used directly. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-12-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Give VLV DPIO group register a clearer nameVille Syrjälä
Include _GRP in VLV DPIO PHY group access register define names. Makes it more obvious where the accesses will land. Also matches the naming used by BXT already. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-11-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Derive the phy from the port rather than pipe in encoder hooksVille Syrjälä
In the encoder hooks we are dealing primarily with the encoder, so derive the DPIO PHY from the encoder rather than the pipe. Technically this doesn't matter as we can't cross connect pipes<->port across PHY boundaries, but it does conveny the intention more accurately. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-10-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: s/pipe/ch/Ville Syrjälä
Stop using 'pipe' directly as the DPIO PHY channel. This does happen to work on VLV since it just has the one PHY with CH0==pipe A and CH1==pipe B. But explicitly converting the thing to the right enum makes the whole thing less confusing. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-9-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: s/port/ch/Ville Syrjälä
Stop calling the DPIO PHY channel "port". Just say "ch", which is already used in a bunch of places. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-8-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Rename some variablesVille Syrjälä
Use a consistent 'tmp' as the variable name for the register values during rmw when we don't deal with multiple registers in parallel. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-7-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Remove pointless variables from vlv/chv DPLL codeVille Syrjälä
Drop all the local variables for the DPLL dividers for vlv/chv and just consult the state directly. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Fix VLV DPIO PLL register dword numberingVille Syrjälä
The spreadsheet defines the PLL register block as having the dwords in the following order: block dwords offsets PLL1 0x0-0x7 0x00-0x1f PLL2 0x0-0x7 0x20-0x3f PLL1ext 0x10-0x1f 0x40-0x5f PLL2ext 0x10-0x1f 0x60-0x7f So dword indexes 0x8-0xf don't even exist. Renumber our register defines to match. Note that the spreadsheet used hex numbering whereas our defiens are in decimal. Perhaps we should change that? Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: s/VLV_PLL_DW9_BCAST/VLV_PCS_DW17_BCAST/Ville Syrjälä
VLV_PLL_DW9_BCAST is actually VLV_PCS_DW17_BCAST. The address does kinda look like it goes to the PLL block on a first glance, but broadcast is special and doesn't even exist for the PLL (only PCS and TX have it). The fact that we use a broadcast write here is a bit sketchy IMO since we're now blasting the register to all PCS splines across the whole PHY. So the PCS registers in the other channel (ie. other pipe/port) will also be written. But I guess the fact that we always write the same value should make this a nop even if the other channel is already enabled (assuming the VBIOS/GOP didn't screw up and use some other value...). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: s/VLV_REF_DW13/VLV_REF_DW11/Ville Syrjälä
Our VLV_REF_DW13 is actually VLV_REF_DW11. Rename it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915/dpio: Remove pointless VLV_PCS01_DW8 readVille Syrjälä
We don't use the result of the VLV_PCS01_DW8 read at all, so don't read. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915: pass dev_priv explicitly to PIPE_WGC_C22Jani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_WGC_C22 register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0a07f615c574040094b37c861078e41daf53c706.1714399071.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915: pass dev_priv explicitly to PIPE_WGC_C21_C20Jani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_WGC_C21_C20 register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/af39047d304f8a5c3c7a643f702f66c06ea5d638.1714399071.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915: pass dev_priv explicitly to PIPE_WGC_C12Jani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_WGC_C12 register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/62a748b685f253151b17c101dec75351577f30c0.1714399071.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915: pass dev_priv explicitly to PIPE_WGC_C11_C10Jani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_WGC_C11_C10 register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3f7aae89cf63760bca43b54102c76b3ed2cf8735.1714399071.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915: pass dev_priv explicitly to PIPE_WGC_C02Jani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_WGC_C02 register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/550d4e787445802236f0bf89e4d2f4f32cbd6d75.1714399071.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915: pass dev_priv explicitly to PIPE_WGC_C01_C00Jani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PIPE_WGC_C01_C00 register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/85b3db6e666a7a629b10b482b7e7043d52d30511.1714399071.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-30drm/i915: pass dev_priv explicitly to PALETTEJani Nikula
Avoid the implicit dev_priv local variable use, and pass dev_priv explicitly to the PALETTE register macro. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/bf07d29cefef23ebd5d54fbb0d3bf7e41d132d93.1714399071.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-29drm/i915/display: split out intel_sprite_regs.h from i915_reg.hJani Nikula
Clean up i915_reg.h. v2: Drop a redundant comment (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/679b7395a78c53006ac07448706f1809b74810de.1714128645.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-29drm/i915/display: split out intel_fbc_regs.h from i915_reg.hJani Nikula
Clean up i915_reg.h. v2: Drop chicken regs and comments (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/aa9b5d8adefbe97e1e37c9cfada3ab1581b0e8d5.1714128645.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-29drm/i915/color: move palette registers to intel_color_regs.hJani Nikula
For some reason the paletter registers were missed when adding intel_color_regs.h. Finish the job. Adjust some comments while at it. v2: Fix comments (Ville) Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1322f577b113b8fc1a6c2ef35340fc3c599b4bcb.1714128645.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-29drm/i915/audio: move LPE audio regs to intel_audio_regs.hJani Nikula
There are too few registers to warrant a dedicated file for LPE audio regs, but the audio reg file is better than i915_reg.h. v2: Rebase Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/b5ee35309b2e0905aaa12d944b3d379c45a8a0bd.1714128645.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-26Merge tag 'drm-misc-next-2024-04-25' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.10-rc1: UAPI Changes: Cross-subsystem Changes: - Devicetree updates for rockchip (#sound-dai-cells) - Add dt bindings for new panels. - Change bridge/tc358775 dt bindings. Core Changes: - Fix SIZE_HINTS cursor property doc. - Parse topology blocks for all DispID < 2.0. - Implement support for tracking cleared free memory, use it in amdgpu. - Drop seq_file.h from drm_print.h, and include debugfs.h explicitly where needed (drivers). Driver Changes: - Small fixes to rockchip, panthor, v3d, bridge chaining, xlx. - Add Khadas TS050 V2, EDO RM69380 OLED, CSOT MNB601LS1-1 panels, - Add SAM9X7 SoC's LVDS controller. - More driver conversions to struct drm_edid. - Support tc358765 in tc358775 bridge. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1ab99848-8fb8-41a6-8967-c4ce6f3634fd@linux.intel.com
2024-04-26Merge tag 'drm-intel-next-2024-04-24' of ↵Dave Airlie
https://anongit.freedesktop.org/git/drm/drm-intel into drm-next Core Changes: - Some DP/DP_MST DRM helpers (Imre) Driver Changes (i915 Display): - PLL refactoring (Ville) - Limit eDP MSO pipe only for display version 20 (Luca) - More display refactor towards independence from i915 dev_priv (Jani) - QGV/SAGV related refactor (Stanislav) - Few MTL/DSC and a UHBR monitor fix (Imre) - BXT/GLK per-lane vswing and PHY reg cleanup (Ville) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zik0LKEtN1PwXXGb@intel.com
2024-04-25drm/print: drop include debugfs.h and include where neededJani Nikula
Surprisingly many places depend on debugfs.h to be included via drm_print.h. Fix them. v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe v2: Also fix ivpu and vmwgfx Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination Acked-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/{i915, xe}: Implement fbdev emulation as in-kernel clientThomas Zimmermann
Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to intel_fbdev_setup() after i915 has registered its DRM device. Just like similar code in other drivers, i915 fbdev emulation now acts like a regular DRM client. Do the same for xe. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_client_dev_unregister() releases all in-kernel clients automatically. No further action is required within i915. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Do the same for xe and remove its call to intel_fbdev_fini(). v8: - setup client in intel_display_driver_register (Jouni) - mention xe in commit message v7: - update xe driver - reword commit message v6: - use 'i915' for i915 device (Jouni) - remove unnecessary code for non-atomic mode setting (Jouni, Ville) - fix function name in commit message (Jouni) v3: - as before, silently ignore devices without displays v2: - let drm_client_register() handle initial hotplug - fix driver name in error message (Jani) - fix non-fbdev build (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-7-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/{i915,xe}: Implement fbdev client callbacksThomas Zimmermann
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Fox xe, remove xe_display_last_close(), which restored the fbdev display. As with i915, the DRM core's drm_lastclose() performs this operation automatically. v8: - mention xe in commit message v7: - update xe driver v6: - return errors from client callbacks (Jouni) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-6-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/{i915,xe}: Unregister in-kernel clientsThomas Zimmermann
Unregister all in-kernel clients before unloading the i915 driver. For other drivers, drm_dev_unregister() does this automatically. As i915 and xe do not use this helper, they have to perform the call by themselves. Note that there are currently no in-kernel clients in i915 or xe. The patch prepares the drivers for a related update of their fbdev support. v8: - unregister clients in intel_display_driver_unregister() (Jani) - mention xe in commit message (Rodrigo, Jani) v7: - update xe driver Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-5-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: Initialize fbdev DRM client with callback functionsThomas Zimmermann
Initialize i915's fbdev client by giving an instance of struct drm_client_funcs to drm_client_init(). Also clean up with drm_client_release(). Doing this in i915 prevents fbdev helpers from initializing and releasing the client internally (see drm_fb_helper_init()). No functional change yet; the client callbacks will be filled later. v6: - rename client to "intel-fbdev" (Jouni) v2: - call drm_fb_helper_unprepare() in error handling (Jani) - fix typo in commit message (Sam) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-4-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: Move fbdev functionsThomas Zimmermann
Move functions within intel_fbdev.c to simplify later updates. Minor style fixes to make checkpatch happy, but no functional changes. v5: - style fixes (checkpatch) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Jouni Högander <jouni.hogander@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240409081029.17843-3-tzimmermann@suse.de Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: pass dev_priv to _MMIO_PIPE2, _MMIO_TRANS2, _MMIO_CURSOR2Jani Nikula
Pass the dev_priv parameter to the low-level helpers, and move the implicit dev_priv usage one level higher. sed -i "s/\(_MMIO_PIPE2(\|_MMIO_TRANS2(\|_MMIO_CURSOR2(\)/\1dev_priv, /" \ $(git ls-files drivers/gpu/drm/i915) Name the parameter "display", as the generics allow it to be display already. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3a865664898586ff6cb8e74eab3d1f36eafc0557.1713890614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-25drm/i915: convert _MMIO_PIPE3()/_MMIO_PORT3() to accept baseJani Nikula
Most users of _MMIO_PIPE3() and _MMIO_PORT3() need to add the MMIO base to the registers. Convert the macros to _MMIO_BASE_PIPE3() and _MMIO_BASE_PORT3() to move the base addition until after the register selection. If the register address depends on DISPLAY_MMIO_BASE(), this removes the need to figure the base out for each register, and it only needs to be added once. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/4b95f125f5021abc00b5fc661b2728f1b583c01e.1713890614.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-24Merge tag 'drm-xe-next-2024-04-23' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next UAPI Changes: - Remove unused flags (Francois Dugast) - Extend uAPI to query HuC micro-controler firmware version (Francois Dugast) - drm/xe/uapi: Define topology types as indexes rather than masks (Francois Dugast) - drm/xe/uapi: Restore flags VM_BIND_FLAG_READONLY and VM_BIND_FLAG_IMMEDIATE (Francois Dugast) - devcoredump updates. Some touching the output format. (José Roberto de Souza, Matthew Brost) - drm/xe/hwmon: Add infra to support card power and energy attributes - Improve LRC, HWSP and HWCTX error capture. (Maarten Lankhorst) - drm/xe/uapi: Add IP version and stepping to GT list query (Matt roper) - Invalidate userptr VMA on page pin fault (Matthew Brost) - Improve xe_bo_move tracepoint (Priyanka Danamudi) - Align fence output format in ftrace log Cross-driver Changes: - drm/i915/hwmon: Get rid of devm (Ashutosh Dixit) (Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>) - drm/i915/display: convert inner wakeref get towards get_if_in_use (SOB Rodrigo Vivi) - drm/i915: Convert intel_runtime_pm_get_noresume towards raw wakeref (Committer, SOB Jani Nikula) Driver Changes: - Fix for unneeded CCS metadata allocation (Akshata Jahagirdar) - Fix for fix multicast support for Xe_LP platforms (Andrzej Hajda) - A couple of build fixes (Arnd Bergmann) - Fix register definition (Ashutosh Dixit) - Add BMG mocs table (Balasubramani Vivekanandan) - Replace sprintf() across driver (Bommu Krishnaiah) - Add an xe2 workaround (Bommu Krishnaiah) - Makefile fix (Dafna Hirschfeld) - force_wake_get error value check (Daniele Ceraolo Spurio) - Handle GSCCS ER interrupt (Daniele Ceraolo Spurio) - GSC Workaround (Daniele Ceraolo Spurio) - Build error fix (Dawei Li) - drm/xe/gt: Add L3 bank mask to GT topology (Francois Dugast) - Implement xe2- and GuC workarounds (Gustavo Sousa, Haridhar Kalvala, Himal rasad Ghimiray, John Harrison, Matt Roper, Radhakrishna Sripada, Vinay Belgaumkar, Badal Nilawar) - xe2hpg compression (Himal Ghimiray Prasad) - Error code cleanups and fixes (Himal Prasad Ghimiray) - struct xe_device cleanup (Jani Nikula) - Avoid validating bos when only requesting an exec dma-fence (José Roberto de Souza) - Remove debug message from migrate_clear (José Roberto de Souza) - Nuke EXEC_QUEUE_FLAG_PERSISTENT leftover internal flag (José Roberto de Souza) - Mark dpt and related vma as uncached (Juha-Pekka Heikkila) - Hwmon updates (Karthik Poosa) - KConfig fix when ACPI_WMI selcted (Lu Yao) - Update intel_uncore_read*() return types (Luca Coelho) - Mocs updates (Lucas De Marchi, Matt Roper) - Drop dynamic load-balancing workaround (Lucas De Marchi) - Fix a PVC workaround (Lucas De Marchi) - Group live kunit tests into a single module (Lucas De Marchi) - Various code cleanups (Lucas De Marchi) - Fix a ggtt init error patch and move ggtt invalidate out of ggtt lock (Maarten Lankhorst) - Fix a bo leak (Marten Lankhorst) - Add LRC parsing for more GPU instructions (Matt Roper) - Add various definitions for hardware and IP (Matt Roper) - Define all possible engines in media IP descriptors (Matt Roper) - Various cleanups, asserts and code fixes (Matthew Auld) - Various cleanups and code fixes (Matthew Brost) - Increase VM_BIND number of per-ioctl Ops (Matthew Brost, Paulo Zanoni) - Don't support execlists in xe_gt_tlb_invalidation layer (Matthew Brost) - Handle timing out of already signaled jobs gracefully (Matthew Brost) - Pipeline evict / restore of pinned BOs during suspend / resume (Matthew Brost) - Do not grab forcewakes when issuing GGTT TLB invalidation via GuC (Matthew Brost) - Drop ggtt invalidate from display code (Matthew Brost) - drm/xe: Add XE_BO_GGTT_INVALIDATE flag (Matthew Brost) - Add debug messages for MMU notifier and VMA invalidate (Matthew Brost) - Use ordered wq for preempt fence waiting (Matthew Brost) - Initial development for SR-IOV support including some refactoring (Michal Wajdeczko) - Various GuC- and GT- related cleanups and fixes (Michal Wajdeczko) - Move userptr over to start using hmm_range_fault (Oak Zeng) - Add new PCI IDs to DG2 platform (Ravi Kumar Vodapalli) - Pcode - and VRAM initialization check update (Riana Tauro) - Large PM update including i915 display patches, and a fix for one of those. (Rodrigo Vivi) - Introduce performance tuning changes for Xe2_HPG (Shekhar Chauhan) - GSC / HDCP updates (Suraj Kandpal) - Minor code cleanup (Tejas Upadhyay) - Rework / fix rebind TLB flushing and move rebind into the drm_exec locking loop (Thomas Hellström) - Backmerge (Thomas Hellström) - GuC updates and fixes (Vinay Belgaumkar, Zhanjun Dong) Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZiestQAKCRC4FpNVCsYG # v8dLAQCDFUR7R5rwSdfqzNy+Djg+9ZgmtzVEfHZ+rI2lTReaCwEAhWeK7UooIMV0 # vGsSdsqGsJQm4VLRzE6H1yemCCQOBgM= # =HouD # -----END PGP SIGNATURE----- # gpg: Signature made Tue 23 Apr 2024 22:42:29 AEST # gpg: using EDDSA key 6C91433BC35A06E6BC762193B81693550AC606BF # gpg: Can't check signature: No public key # Conflicts: # drivers/gpu/drm/xe/xe_device_types.h # drivers/gpu/drm/xe/xe_vm.c # drivers/gpu/drm/xe/xe_vm_types.h From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Zievlb1wvqDg1ovi@fedora
2024-04-23drm/i915/dsi: pass display to register macros instead of implicit variableJani Nikula
Stop relying on the dev_priv local variable in the DSI register macros. Pass struct intel_display pointer to the macros. Move the MIPI DSI MMIO base selection to a different level, passing it to _MMIO_MIPI() and doing the addition there. Start using the local display variable for all intel_de_* usage, and opportunistically use it for other things than display registers as well. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/6dd52f3fce3527242479aadc276d05de74ceae5d.1713520813.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-23drm/i915/dsi: unify connector/encoder type and name usageJani Nikula
Stop using struct drm_* local variables and parameters where possible. Drop the intel_ prefix from struct intel_encoder and intel_connector local variable and parameter names. Drop useless intermediate variables. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7aa8fbaa2ecbe2400255964d49aba40cfe0479c5.1713520813.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-23drm/i915/dsi: add VLV_ prefix to VLV only register macrosJani Nikula
All the BXT specific macros have BXT_ prefix, do the same for VLV for consistency. This is helpful because the platform specific macros can use the static MIPI MMIO base rather than dynamic. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7e101167c52746748dbff739bc9247a664ca2840.1713520813.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-23drm/i915/dsi: remove unused _MIPIA_AUTOPWG register definitionJani Nikula
There are other unused registers, but this is also unusable and inadequate. Remove. Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/57afda02856a68f78fe4d30384d4f7b352b9a812.1713520813.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-22drm/i915/display: move dmc_firmware_path to display paramsJani Nikula
The dmc_firmware_path parameter is clearly a display parameter. Move it there so it's available to both i915 and xe modules. This also cleans up the ugly member in struct xe_device. v2: - New try with the NULL/"" param value issue resolved Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/7c8223b68fdafbc72bee0bf5afdb2ab15261cf00.1713519628.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-22drm/i915/dmc: change how to disable DMC firmware using module paramJani Nikula
The distinction between the dmc_firmware_path module param being NULL and the empty string "" is problematic. It's not possible to set the parameter back to NULL via sysfs or debugfs. Remove the distinction, and consider NULL and the empty string to be the same thing, and use the platform default for them. This removes the possibility to disable DMC (and runtime PM) via i915.dmc_firmware_path="". Instead, use "/dev/null" as the magic firmware path to skip DMC firmware loading and disable runtime PM. v2: Add support for i915.dmc_firmware_path="/dev/null" (Gustavo) Cc: Gustavo Sousa <gustavo.sousa@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/8695aca8a6643e36bb680bc2dcab97c637e70b00.1713519628.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-22drm/i915/dmc: split out per-platform firmware path selectionJani Nikula
The big if ladder clutters intel_dmc_init(). Split it out to a separate function. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/fe3d7b2b18c317a2f924f2023271d38afee3b18a.1713519628.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-22drm/i915/dmc: improve firmware parse failure propagationJani Nikula
Return failures from parse_dmc_fw() instead of relying on intel_dmc_has_payload(). Handle and error report them slightly better, including a new error message for when the firmware does not contain the main program. v2: Print specific error message for payload not found (Gustavo) Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/18833681978ec3ac779cce943221cc5b532c7c45.1713519628.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-22drm/i915/dmc: handle request_firmware() errors separatelyJani Nikula
Clarify request_firmware() error handling. Don't proceed to trying to parse non-existent firmware or check for payload when request_firmware() failed to begin with. There's no reason to release_firmware() either when request_firmware() failed. Also move the message about DMC firmware homepage here, as in other cases the user probably has some firmware, although its parsing fails for some reason. Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com> Acked-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/0654bb3480f8d2103225d26f665badead5495532.1713519628.git.jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-22Merge tag 'drm-misc-next-2024-04-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for v6.10-rc1: UAPI Changes: - Add SIZE_HINTS property for cursor planes. Cross-subsystem Changes: Core Changes: - Document the requirements and expectations of adding new driver-specific properties. - Assorted small fixes to ttm. - More Kconfig fixes. - Add struct drm_edid_product_id and helpers. - Use drm device based logging in more drm functions. - Fixes for drm-panic, and option to test it. - Assorted small fixes and updates to edid. - Add drm_crtc_vblank_crtc and use it in vkms, nouveau. Driver Changes: - Assorted small fixes and improvements to bridge/imx8mp-hdmi-tx, nouveau, ast, qaic, lima, vc4, bridge/anx7625, mipi-dsi. - Add drm panic to simpledrm, mgag200, imx, ast. - Use dev_err_probe in bridge/panel drivers. - Add Innolux G121X1-L03, LG sw43408 panels. - Use struct drm_edid in i915 bios parsing. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2dc1b7c6-1743-4ddd-ad42-36f700234fbe@linux.intel.com
generated by cgit (git 2.34.1) at 2024-05-27 16:55:47 +0000