summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/vc4/vc4_plane.c
AgeCommit message (Collapse)Author
2025-02-14drm/atomic: Let drivers decide which planes to async flipAndré Almeida
Currently, DRM atomic uAPI allows only primary planes to be flipped asynchronously. However, each driver might be able to perform async flips in other different plane types. To enable drivers to set their own restrictions on which type of plane they can or cannot flip, use the existing atomic_async_check() from struct drm_plane_helper_funcs to enhance this flexibility, thus allowing different plane types to be able to do async flips as well. Create a new parameter for the atomic_async_check(), `bool flip`. This parameter is used to distinguish when this function is being called from a plane update from a full page flip. In order to prevent regressions and such, we keep the current policy: we skip the driver check for the primary plane, because it is always allowed to do async flips on it. Signed-off-by: André Almeida <andrealmeid@igalia.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Christopher Snowhill <chris@kode54.net> Tested-by: Christopher Snowhill <chris@kode54.net> Link: https://patchwork.freedesktop.org/patch/msgid/20250127-tonyk-async_flip-v12-1-0f7f8a8610d3@igalia.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-11drm/vc4: plane: Remove WARN on state being set in plane_resetDave Stevenson
It is permitted on situations such as system resume for plane->state to be non-NULL, and that should be handled by freeing it. Do so. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Maíra Canal <mcanal@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241202120343.33726-1-wahrenst@gmx.net
2024-11-27drm/vc4: Drop planes that are completely off-screen or 0 crtc sizeDave Stevenson
It is permitted for a plane to be configured such that none of it is on-screen via either negative dest rectangle X,Y offset, or an offset that is greater than the crtc dimensions. These planes were resized via drm_atomic_helper_check_plane_state such that the source rectangle had a zero width or height, but they still created a dlist entry even though they contributed no pixels. In the case of vc6_plane_mode_set, that it could result in negative values being written into registers, which caused incorrect behaviour. Drop planes that result in a source width or height of 0 pixels or an on-screen size of 0 pixels to avoid the incorrect rendering. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241025-drm-vc4-2712-support-v2-28-35efa83c8fc0@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-11-27drm/vc4: Add additional warn_on for incorrect revisionsMaxime Ripard
Some code path in vc4 are conditional to a generation and cannot be executed on others. Let's put a WARN_ON if that ever happens. Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241025-drm-vc4-2712-support-v2-26-35efa83c8fc0@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-11-27drm/vc4: plane: Add support for 2712 D-step.Dave Stevenson
There are a few minor changes in the display list generation for the D-step of the chip, so add them. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241025-drm-vc4-2712-support-v2-24-35efa83c8fc0@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-11-27drm/vc4: hvs: Add support for BCM2712 HVSMaxime Ripard
The HVS found in the BCM2712, while having a similar role, is very different from the one found in the previous SoCs. Indeed, the register layout is fairly different, and the DLIST format is new as well. Let's introduce the needed functions to support the new HVS. This commit adds the C-step register layout. The D-step will be added later. Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241025-drm-vc4-2712-support-v2-10-35efa83c8fc0@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: Move the buffer offset out of the vc4_plane_stateDave Stevenson
The offset fields in vc4_plane_state are described as being the offset for each buffer in the bo, however it is used to store the complete DMA address that is then written into the register. The DMA address including the fb ofset can be retrieved using drm_fb_dma_get_gem_addr, and the offset adjustment due to clipping is local to vc4_plane_mode_set. Drop the offset field from the state, and compute the complete DMA address in vc4_plane_mode_set. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-30-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: hvs: Rework LBM alignmentMaxime Ripard
With the introduction of the support for BCM2712, the check of whether we're running on vc5 or not to compute the LBM alignment requirement doesn't work anymore. Moreover, the LBM size will need to be computed in words for the BCM2712, while we've had sizes in bytes so far. Aligning on either 64 or 32 words is thus fairly harmful on BCM2712, so let's just explicitly align the size when needed, and then call drm_mm_insert_node_generic() with an alignment of 1. Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-28-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: Change ptr0_offset to an arrayMaxime Ripard
The BCM2712 will have a fairly different dlist, that will feature one Pointer 0 word for each plane. Let's prepare by changing the ptr0_offset variable that holds the offset in a dlist of the pointer 0 word to an array. Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-27-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: Introduce generation number enumMaxime Ripard
With the introduction of the BCM2712 support, we will get yet another generation of display engine to support. The binary check of whether it's VC5 or not thus doesn't work anymore, especially since some parts of the driver will have changed with BCM2711, and some others with BCM2712. Let's introduce an enum to store the generation the driver is running on, which should provide more flexibility. Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-21-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: YUV planes require vertical scaling to always be enabledDave Stevenson
It has been observed that a YUV422 unity scaled plane isn't displayed. Enabling vertical scaling on the UV planes solves this. There is already a similar clause to always enable horizontal scaling on the UV planes. Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-16-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: Use return variable in atomic_checkMaxime Ripard
The vc4_plane_atomic_check() directly returns the result of the final function it calls. Using the already defined ret variable to check its content on error, and a separate return 0 on success, makes it easier to extend. Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-13-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: Add more debugging for LBM allocationMaxime Ripard
LBM allocations need a different size depending on the line length, format, etc. This can get tricky, and fail. Let's add some more prints to ease the debugging when it does. Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-12-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: hvs: Print error if we fail an allocationMaxime Ripard
We need to allocate a few additional structures when checking our atomic_state, especially related to hardware SRAM that will hold the plane descriptors (DLIST) and the current line context (LBM) during composition. Since those allocation can fail, let's add some error message in that case to help debug what goes wrong. Signed-off-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-11-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: Add support for YUV444 formatsDom Cobley
Support displaying DRM_FORMAT_YUV444 and DRM_FORMAT_YVU444 formats. Tested with kmstest and kodi. e.g. kmstest -r 1920x1080@60 -f 400x300-YU24 Note: without the shift of width, only half the chroma is fetched, resulting in correct left half of image and corrupt colours on right half. The increase in width shouldn't affect fetching of Y data, as the hardware will clamp at dest width. Signed-off-by: Dom Cobley <popcornmix@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-6-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: Handle fractional coordinates using the phase fieldDom Cobley
Apply fractional source co-ordinates into the scaling filters. Signed-off-by: Dom Cobley <popcornmix@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-3-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-09-09drm/vc4: plane: Keep fractional source coords inside stateDom Cobley
Fractional source co-ordinates can be used to setup the scaling filters, so retain the information. Signed-off-by: Dom Cobley <popcornmix@gmail.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240621152055.4180873-2-dave.stevenson@raspberrypi.com Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
2024-01-11drm/vc4: don't check if plane->state->fb == state->fbMaíra Canal
Currently, when using non-blocking commits, we can see the following kernel warning: [ 110.908514] ------------[ cut here ]------------ [ 110.908529] refcount_t: underflow; use-after-free. [ 110.908620] WARNING: CPU: 0 PID: 1866 at lib/refcount.c:87 refcount_dec_not_one+0xb8/0xc0 [ 110.908664] Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device cmac algif_hash aes_arm64 aes_generic algif_skcipher af_alg bnep hid_logitech_hidpp vc4 brcmfmac hci_uart btbcm brcmutil bluetooth snd_soc_hdmi_codec cfg80211 cec drm_display_helper drm_dma_helper drm_kms_helper snd_soc_core snd_compress snd_pcm_dmaengine fb_sys_fops sysimgblt syscopyarea sysfillrect raspberrypi_hwmon ecdh_generic ecc rfkill libaes i2c_bcm2835 binfmt_misc joydev snd_bcm2835(C) bcm2835_codec(C) bcm2835_isp(C) v4l2_mem2mem videobuf2_dma_contig snd_pcm bcm2835_v4l2(C) raspberrypi_gpiomem bcm2835_mmal_vchiq(C) videobuf2_v4l2 snd_timer videobuf2_vmalloc videobuf2_memops videobuf2_common snd videodev vc_sm_cma(C) mc hid_logitech_dj uio_pdrv_genirq uio i2c_dev drm fuse dm_mod drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 110.909086] CPU: 0 PID: 1866 Comm: kodi.bin Tainted: G C 6.1.66-v8+ #32 [ 110.909104] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 110.909114] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 110.909132] pc : refcount_dec_not_one+0xb8/0xc0 [ 110.909152] lr : refcount_dec_not_one+0xb4/0xc0 [ 110.909170] sp : ffffffc00913b9c0 [ 110.909177] x29: ffffffc00913b9c0 x28: 000000556969bbb0 x27: 000000556990df60 [ 110.909205] x26: 0000000000000002 x25: 0000000000000004 x24: ffffff8004448480 [ 110.909230] x23: ffffff800570b500 x22: ffffff802e03a7bc x21: ffffffecfca68c78 [ 110.909257] x20: ffffff8002b42000 x19: ffffff802e03a600 x18: 0000000000000000 [ 110.909283] x17: 0000000000000011 x16: ffffffffffffffff x15: 0000000000000004 [ 110.909308] x14: 0000000000000fff x13: ffffffed577e47e0 x12: 0000000000000003 [ 110.909333] x11: 0000000000000000 x10: 0000000000000027 x9 : c912d0d083728c00 [ 110.909359] x8 : c912d0d083728c00 x7 : 65646e75203a745f x6 : 746e756f63666572 [ 110.909384] x5 : ffffffed579f62ee x4 : ffffffed579eb01e x3 : 0000000000000000 [ 110.909409] x2 : 0000000000000000 x1 : ffffffc00913b750 x0 : 0000000000000001 [ 110.909434] Call trace: [ 110.909441] refcount_dec_not_one+0xb8/0xc0 [ 110.909461] vc4_bo_dec_usecnt+0x4c/0x1b0 [vc4] [ 110.909903] vc4_cleanup_fb+0x44/0x50 [vc4] [ 110.910315] drm_atomic_helper_cleanup_planes+0x88/0xa4 [drm_kms_helper] [ 110.910669] vc4_atomic_commit_tail+0x390/0x9dc [vc4] [ 110.911079] commit_tail+0xb0/0x164 [drm_kms_helper] [ 110.911397] drm_atomic_helper_commit+0x1d0/0x1f0 [drm_kms_helper] [ 110.911716] drm_atomic_commit+0xb0/0xdc [drm] [ 110.912569] drm_mode_atomic_ioctl+0x348/0x4b8 [drm] [ 110.913330] drm_ioctl_kernel+0xec/0x15c [drm] [ 110.914091] drm_ioctl+0x24c/0x3b0 [drm] [ 110.914850] __arm64_sys_ioctl+0x9c/0xd4 [ 110.914873] invoke_syscall+0x4c/0x114 [ 110.914897] el0_svc_common+0xd0/0x118 [ 110.914917] do_el0_svc+0x38/0xd0 [ 110.914936] el0_svc+0x30/0x8c [ 110.914958] el0t_64_sync_handler+0x84/0xf0 [ 110.914979] el0t_64_sync+0x18c/0x190 [ 110.914996] ---[ end trace 0000000000000000 ]--- This happens because, although `prepare_fb` and `cleanup_fb` are perfectly balanced, we cannot guarantee consistency in the check plane->state->fb == state->fb. This means that sometimes we can increase the refcount in `prepare_fb` and don't decrease it in `cleanup_fb`. The opposite can also be true. In fact, the struct drm_plane .state shouldn't be accessed directly but instead, the `drm_atomic_get_new_plane_state()` helper function should be used. So, we could stick to this check, but using `drm_atomic_get_new_plane_state()`. But actually, this check is not really needed. We can increase and decrease the refcount symmetrically without problems. This is going to make the code more simple and consistent. Signed-off-by: Maíra Canal <mcanal@igalia.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240105175908.242000-1-mcanal@igalia.com
2024-01-02drm/vc4: plane: check drm_gem_plane_helper_prepare_fb() return valueSimon Ser
Bubble up any error to the caller. Signed-off-by: Simon Ser <contact@emersion.fr> Cc: Maxime Ripard <mripard@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Dave Stevenson <dave.stevenson@raspberrypi.com> Reviewed-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20231216141518.242811-1-contact@emersion.fr
2023-04-25drm/vc4: Switch to container_of_constMaxime Ripard
container_of_const() allows to preserve the pointer constness and is thus more flexible than inline functions. Let's switch all our instances of container_of() to container_of_const(). Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20221207-rpi-hdmi-improvements-v3-1-bdd54f66884e@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-02-22Merge tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "There are a bunch of changes all over in the usual places. Highlights: - habanalabs moves from misc to accel - first accel driver for Intel VPU (Versatile Processing Unit) inference engine - dropped all the ancient legacy DRI1 drivers. I think it's been at least 10 years since anyone has heard about these. - Intel DG2 updates and prelim Meteorlake enablement - etnaviv adds support for Versilicon NPU device (a GPU like engine with inference accelerators) Detailed summary: Removals: - remove legacy dri1 drivers: i810, mga, r128, savage, sis, tdfx, via New driver: - intel VPU accelerator driver - habanalabs comes via drm tree now drm/core: - use drm_dbg_ helpers in several places - Document defaults for CRTC backgrounds - Document use of drm_minor edid: - improve mode parsing and refactoring connector: - support analog TV mode property media: - add some common formats udmabuf: - add vmap/vunmap methods fourcc: - add XRGB1555 and RGB565 formats - document open source user waiver firmware: - fix color-format selection for system framebuffer format-helper: - Add conversion from XRGB8888 to various sysfb formats - Make XRGB8888 the only driver-emulated legacy format - Add conversion from XRGB8888 to XBGR8888 and ABGR8888 fb-helper: - fix preferred depth and bpp values across drivers - Avoid blank consoles from selecting an incorrect color format probe-helper: - Enable/disable HPD on connectors scheduler: - Fix lockup in drm_sched_entity_kill() - Deprecate drm_sched_resubmit_jobs() bridge: - remove unused functions - implement i2c probe_new in various drivers - ite-it6505: Locking fixes, Cache EDID data - ite-it66121: Support IT6610 chip - lontium-tl9611: Fix HDMI on DragonBoard 845c - parade-ps8640: Use atomic bridge functions - Support i.MX93 LDB plus DT bindings debugfs: - add per device helpers and convert drivers displayport: - mst fixes - add DP adaptive sync DPCD definitions fbdev: - always pick 32bpp as default - remove some unused code simpledrm: - support system memory framebuffers panel: - add orientation quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50 - Use ktime_get_boottime() to measure power-down delay - Fix auto-suspend delay - Visionox VTDR6130 AMOLED DSI - Support Himax HX8394 - Convert many drivers to common generic DSI write-sequence helper - AUO A030JTN01 ttm: - drop bo wait wrapper - fix MIPS build habanalabs: - moved driver to accel subsystem - gaudi2 decoder error improvement - more trace events - Gaudi2 abrupt reset by firmware support - add uAPI to flush memory transactions - add uAPI to pass through userspace reqs to fw - remove dma-buf export by handle amdgpu: - add new INFO queries for peak and min sclk/mclk for profile modes - Add PCIe info to the INFO IOCTL - secure display support for multiple displays - DML optimizations - DCN 3.2 updates - PSR updates - DP 2.1 updates - SR-IOV RAS updates - VCN RAS support - SMU 13.x updates - Switch 1 element arrays to flexible arrays - Add RAS support for DF 4.3 - Stack size improvements - S0ix rework - Allow 0 as a vram limit on APUs - Handle profiling modes for SMU13.x - Fix possible segfault in failure case - Rework FW requests to happen in early_init for all IPs so that we don't lose the sbios console if FW is missing - Fix power reporting on certain firmwares for CZN/RN - Allow S0ix without BIOS support - Enable freesync over PCon - Re-enable the AGP aperture on GMC 11.x amdkfd: - Error handling fixes - PASID fixes - Fix for cleared VRAM BOs - Fix cleanup if GPUVM creation fails - Memory accounting fix - Use resource_size rather than open codeing it - GC11 mGPU fix radeon: - Switch 1 element arrays to flexible arrays - Fix memory leak on shutdown - move to new logging i915: - Meteorlake display/OA/GSC fw/workarounds enabling - DP MST DSC support - Gamma/degamma readout support for the state checker - Enable SDP split support for DP 2.0 - Add probe blocking support to i915.force_probe parameter - Enable Xe HP 4tile support - Avoid display direct calls to uncore - Fix HuC delayed load memory leaks - Add DG2 workarounds Wa_18018764978 and Wa_18019271663 - Improve suspend / resume times with VT-d scanout workaround active - Fix DG2 visual corruption on small BAR systems by not forgetting to copy CCS aux state - Fix TLB invalidation for Gen12.50 video and compute engines - Enable HF-EEODB by switching HDMI, DP and LVDS to use struct drm_edid - Start using unversioned DMC firmware paths for new platforms - ELD refactor: Stop using hardware buffer, precompute ELD - lots of display code refactoring nouveau: - drop legacy ioctl support - replace 0-sized array msm: - dpu/dsi/mdss: Support for SM8350, SM8450 SM8550 and SC8280XP platform - Added bindings for SM8150 - dpu: Partial support for DSC on SM8150 and SM8250 - dpu: Fixed color transformation matrix being lost on suspend/resume - dp: Support SDM845 and SC8280XP platforms - dp: Support for limiting DP link rate via DT property - dsi: Validate display modes according to the DSI OPP table - dsi: DSI PHY support for the SM6375 platform - Add MSM_SUBMIT_BO_NO_IMPLICI - a2xx: Support to load legacy firmware - a6xx: GPU devcore dump updates for a650/a660 - GPU devfreq tuning and fixes - Turn 8960 HDMI PHY into clock provider, - Make 8960 HDMI PHY use PXO clock from DT etnaviv: - experimental versilicon NPU support - report GPU load via fdinfo format - MMU fault message improvements tegra: - rework syncpoint interrupt mediatek: - DSI timing fix - fix config deps ast: - various fixes exynos: - restore bridge chain order fixes gud: - convert to shadow plane buffers - perform flushing synchronously during atomic update - Use new debugfs helpers arm/hdlcd: - Use new debugfs helper ili9486: - Support 16-bit pixel data imx: - Split off IPUv3 driver mipi-dbi: - convert to DRM shadow-plane helpers - rsp driver changes - Support separate I/O-voltage supply mxsfb: - Depend on ARCH_MXS or ARCH_MXC sun4i: - convert to new TV mode property vc4: - convert to new TV mode property - kunit tests - Support RGB565 and RGB666 formats - convert dsi driver to bridge - Various HVS an CRTC fixes v3d: - Do not opencode drm_gem_object_lookup() virtio: - improve tracing vkms: - support small cursors in IGT tests - Fix SEGFAULT from incorrect GEM-buffer mapping rcar-du: - fixes and improvements" * tag 'drm-next-2023-02-23' of git://anongit.freedesktop.org/drm/drm: (1455 commits) msm/fbdev: fix unused variable warning with clang. drm/fb-helper: Remove drm_fb_helper_unprepare() from drm_fb_helper_fini() dma-buf: make kobj_type structure constant drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt() drm/amd/display: disable SubVP + DRR to prevent underflow drm/amd/display: Fail atomic_check early on normalize_zpos error drm/amd/pm: avoid unaligned access warnings drm/amd/display: avoid unaligned access warnings drm/amd/display: Remove duplicate/repeating expressions drm/amd/display: Remove duplicate/repeating expression drm/amd/display: Make variables declaration inside ifdef guard drm/amd/display: Fix excess arguments on kernel-doc drm/amd/display: Add previously missing includes drm/amd/amdgpu: Add function prototypes to headers drm/amd/display: Add function prototypes to headers drm/amd/display: Turn global functions into static drm/amd/display: remove unused _calculate_degamma_curve function drm/amd/display: remove unused func declaration from resource headers drm/amd/display: unset initial value for tf since it's never used drm/amd/display: camel case cleanup in color_gamma file ...
2023-02-09drm/vc4: Fix YUV plane handling when planes are in different buffersDave Stevenson
YUV images can either be presented as one allocation with offsets for the different planes, or multiple allocations with 0 offsets. The driver only ever calls drm_fb_[dma|cma]_get_gem_obj with plane index 0, therefore any application using the second approach was incorrectly rendered. Correctly determine the address for each plane, removing the assumption that the base address is the same for each. Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20230127155708.454704-1-maxime@cerno.tech
2023-01-09drm/vc4: plane: Add 3:3:2 and 4:4:4:4 RGB/RGBX/RGBA formatsDave Stevenson
The hardware supports the 332 8bpp and 4:4:4:4 16bpp formats, but the table of supported formats didn't include them. Add them in. In theory they are supported for T-format as well as linear, but without a way to test them just add them as linear for now. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-11-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: plane: Omit pixel_order from the hvs_format for hvs5 only formatsDave Stevenson
pixel_order is used for the earlier versions of the HVS, so is redundant on the 10:10:10:2 and 10bit YUV formats that are only supported on HVS5. Remove the assignment from the table to avoid confusion. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-10-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: plane: Allow using 0 as a pixel order valueDave Stevenson
vc4_plane_mode_set for HVS5 was using pixel_order unless pixel_order_hvs5 was non-zero, except 0 is a valid value for the pixel_order. Specify pixel_order_hvs5 for all formats and remove the conditional. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-9-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: hvs: Add DRM 210101010 RGB formatsDave Stevenson
HVS5 supports the 210101010 RGB[A|X] formats, but they were missing from the DRM to HVS mapping list, so weren't available. Add them in. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-7-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: hvs: Fix colour order for xRGB1555 on HVS5Dave Stevenson
Same as the xRGB8888 formats, HVS5 has managed to swap the colour channels for the xRGB1555 formats as well. Add the relevant config for pixel_order_hvs5. Fixes: c54619b0bfb3 ("drm/vc4: Add support for the BCM2711 HVS5") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-6-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2023-01-09drm/vc4: hvs: Support zpos on all planesDave Stevenson
Adds the zpos property to all planes, and creates the dlist by placing the fragments in the correct order based on zpos. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-5-1f8e0770798b@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-08-25drm/vc4: plane: protect device resources after removalDanilo Krummrich
(Hardware) resources which are bound to the driver and device lifecycle must not be accessed after the device and driver are unbound. However, the DRM device isn't freed as long as the last user closed it, hence userspace can still call into the driver. Therefore protect the critical sections which are accessing those resources with drm_dev_enter() and drm_dev_exit(). Fixes: 9872c7a31921 ("drm/vc4: plane: Switch to drmm_universal_plane_alloc()") Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220824161327.330627-3-dakr@redhat.com
2022-08-03drm/gem: rename struct drm_gem_dma_object.{paddr => dma_addr}Danilo Krummrich
The field paddr of struct drm_gem_dma_object holds a DMA address, which might actually be a physical address. However, depending on the platform, it can also be a bus address or a virtual address managed by an IOMMU. Hence, rename the field to dma_addr, which is more applicable. In order to do this renaming the following coccinelle script was used: ``` @@ struct drm_gem_dma_object *gem; @@ - gem->paddr + gem->dma_addr @@ struct drm_gem_dma_object gem; @@ - gem.paddr + gem.dma_addr @exists@ typedef dma_addr_t; symbol paddr; @@ dma_addr_t paddr; <... - paddr + dma_addr ...> @@ symbol paddr; @@ dma_addr_t - paddr + dma_addr ; ``` This patch is compile-time tested with: ``` make ARCH={x86_64,arm,arm64} allyesconfig make ARCH={x86_64,arm,arm64} drivers/gpu/drm` ``` Acked-by: Sam Ravnborg <sam@ravnborg.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-5-dakr@redhat.com
2022-08-03drm/gem: rename GEM CMA helpers to GEM DMA helpersDanilo Krummrich
Rename "GEM CMA" helpers to "GEM DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEM DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "GEM CMA", but not "FB CMA". Also drivers/gpu/drm/Makefile was fixed up manually after renaming drm_gem_cma_helper.c to drm_gem_dma_helper.c. This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com
2022-08-03drm/fb: rename FB CMA helpers to FB DMA helpersDanilo Krummrich
Rename "FB CMA" helpers to "FB DMA" helpers - considering the hierarchy of APIs (mm/cma -> dma -> fb dma) calling them "FB DMA" seems to be more applicable. Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers") requests to rename the CMA helpers and implies that people seem to be confused about the naming. In order to do this renaming the following script was used: ``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(FB)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(fb)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done ``` Only a few more manual modifications were needed, e.g. reverting the following modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUS as well as manually picking the occurrences of 'CMA'/'cma' in comments and documentation which relate to "FB CMA", but not "GEM CMA". This patch is compile-time tested building a x86_64 kernel with `make allyesconfig && make drivers/gpu/drm`. Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Reviewed-by: Liviu Dudau <liviu.dudau@arm.com> #drivers/gpu/drm/arm Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-3-dakr@redhat.com
2022-07-26drm: Remove unnecessary include statements of drm_plane_helper.hThomas Zimmermann
Remove the include statement for drm_plane_helper.h from all the files that don't need it. Althogh the header file is almost empty, many drivers include it somewhere. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20220720083058.15371-5-tzimmermann@suse.de
2022-07-13drm/vc4: plane: Switch to drmm_universal_plane_alloc()Maxime Ripard
Let's switch to drmm_universal_plane_alloc() for our plane allocation and initialisation to make the driver a bit simpler. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220711173939.1132294-20-maxime@cerno.tech
2022-07-13drm/vc4: plane: Take possible_crtcs as an argumentMaxime Ripard
vc4_plane_init() currently initialises the plane with no possible CRTCs, and will expect the caller to set it up by itself. Let's change that logic a bit to follow the syntax of drm_universal_plane_init() and pass the possible CRTCs bitmask as an argument to the function instead. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220711173939.1132294-18-maxime@cerno.tech
2022-07-13Backmerge tag 'v5.19-rc6' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next Backmerge in rc6 so I can merge msm next easier. Linux 5.19-rc6 Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-06-28drm/vc4: plane: Add alpha_blend_mode property to each plane.Dave Stevenson
Move from only supporting the default of pre-multiplied alpha to supporting user specified blend mode using the standardised property. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-7-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: plane: Fix margin calculations for the right/bottom edgesDave Stevenson
The current plane margin calculation code clips the right and bottom edges of the range based using the left and top margins. This is obviously wrong, so let's fix it. Fixes: 666e73587f90 ("drm/vc4: Take margin setup into account when updating planes") Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20220613144800.326124-6-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-28drm/vc4: plane: Remove subpixel positioning checkDom Cobley
There is little harm in ignoring fractional coordinates (they just get truncated). Without this: modetest -M vc4 -F tiles,gradient -s 32:1920x1080-60 -P89@74:1920x1080*.1.1@XR24 is rejected. We have the same issue in Kodi when trying to use zoom options on video. Note: even if all coordinates are fully integer. e.g. src:[0,0,1920,1080] dest:[-10,-10,1940,1100] it will still get rejected as drm_atomic_helper_check_plane_state uses drm_rect_clip_scaled which transforms this to fractional src coords Fixes: 21af94cf1a4c ("drm/vc4: Add support for scaling of display planes.") Signed-off-by: Dom Cobley <popcornmix@gmail.com> Link: https://lore.kernel.org/r/20220613144800.326124-5-maxime@cerno.tech Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-06-20drm: Drop drm_blend.h from drm_crtc.hVille Syrjälä
drm_crtc.h has no need for drm_blend.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_blend.h. Quite a few placs do currently depend on drm_blend.h without actually including it directly. All of those need to be fixed up. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220613200317.11305-4-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-20drm: Drop drm_framebuffer.h from drm_crtc.hVille Syrjälä
drm_crtc.h has no need for drm_frambuffer.h, so don't include it. Avoids useless rebuilds of the entire universe when touching drm_framebuffer.h. Quite a few placs do currently depend on drm_framebuffer.h without actually including it directly. All of those need to be fixed up. v2: Fix up msm some more v2: Deal with ingenic and shmobile as well Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220614095449.29311-1-ville.syrjala@linux.intel.com Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Jani Nikula <jani.nikula@intel.com>
2022-06-16drm/vc4: plane: Register a different drm_plane_helper_funcs on BCM2711Maxime Ripard
On the BCM2711, our current definition of drm_plane_helper_funcs uses the custom vc4_prepare_fb() and vc4_cleanup_fb(). Those functions rely on the buffer allocation path that was relying on the GPU, and is no longer relevant. Let's create another drm_plane_helper_funcs structure that we will register on the BCM2711. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-8-maxime@cerno.tech
2022-06-16drm/vc4: Consolidate Hardware Revision CheckMaxime Ripard
A new generation of controller has been introduced with the BCM2711/RaspberryPi4. This generation needs a bunch of quirks, and over time we've piled on a number of checks in most parts of the drivers. All these checks are performed several times, and are not always consistent. Let's create a single, global, variable to hold it and use it everywhere. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-3-maxime@cerno.tech
2022-06-16drm/vc4: plane: Prevent async update if we don't have a dlistMaxime Ripard
The vc4 planes are setup in hardware by creating a hardware descriptor in a dedicated RAM. As part of the process to setup a plane in KMS, we thus need to allocate some part of that dedicated RAM to store our descriptor there. The async update path will just reuse the descriptor already allocated for that plane and will modify it directly in RAM to match whatever has been asked for. In order to do that, it will compare the descriptor for the old plane state and the new plane state, will make sure they fit in the same size, and check that only the position or buffer address have changed. Reviewed-by: Melissa Wen <mwen@igalia.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20220610115149.964394-2-maxime@cerno.tech
2022-04-29drm/vc4: simplify the return expression of vc4_prepare_fb()Minghao Chi
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20220429054945.3852039-1-chi.minghao@zte.com.cn
2021-12-16drm/vc4: plane: Add support for YUV color encodings and rangesDave Stevenson
The BT601/BT709 color encoding and limited vs full range properties were not being exposed, defaulting always to BT601 limited range. Expose the parameters and set the registers appropriately. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-4-maxime@cerno.tech
2021-12-16drm/vc4: plane: Add support for DRM_FORMAT_P030Dave Stevenson
The P030 format, used with the DRM_FORMAT_MOD_BROADCOM_SAND128 modifier, is a format output by the video decoder on the BCM2711. Add native support to the KMS planes for that format. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20211215091739.135042-3-maxime@cerno.tech
2021-11-04drm/vc4: Leverage the load tracker on the BCM2711Maxime Ripard
The load tracker was initially designed to report and warn about a load too high for the HVS. To do so, it computes for each plane the impact it's going to have on the HVS, and will warn (if it's enabled) if we go over what the hardware can process. While the limits being used are a bit irrelevant to the BCM2711, the algorithm to compute the HVS load will be one component used in order to compute the core clock rate on the BCM2711. Let's remove the hooks to prevent the load tracker to do its computation, but since we don't have the same limits, don't check them against them, and prevent the debugfs file to enable it from being created. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://lore.kernel.org/r/20211025152903.1088803-8-maxime@cerno.tech
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-08drm/vc4: plane: Remove redundant assignmentMaxime Ripard
The vc4_plane_atomic_async_update function assigns twice in a row the src_h field in the drm_plane_state structure to the same value. Remove the second one. Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210318161328.1471556-2-maxime@cerno.tech
generated by cgit (git 2.34.1) at 2025-04-22 00:55:53 +0000