summaryrefslogtreecommitdiff
path: root/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
AgeCommit message (Collapse)Author
2019-04-25coresight: Merge the static and dynamic replicator driversSuzuki K Poulose
Merge the drivers for the two varieties of replicators into a singel one. The dynamic replicator has programming base which can be programmed to filter the trace data. The driver detects the type based on the "base" address value of the device, which is NULL for the static device. Also, while at it, remove the now obsolete DYNAMIC_REPLICATOR config entry. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25coresight: dynamic-replicator: Prepare for merging with static replicatorSuzuki K Poulose
Rename the dynamic replicator specific routines for merging with the replicator driver. Also re-arrange the probe routine to make it easier to merge. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25coresight: dynamic-replicator: Clean up error handlingSuzuki K Poulose
We fail to disable the clock in case of a failure during the probe. Clean this up. Also, we are supposed to drop the pm reference only when the probing is successful. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25coresight: dynamic-replicator: Claim device for useSuzuki K Poulose
Use CLAIM protocol to make sure the device is available for use. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25coresight: dynamic-replicator: Handle multiple connectionsSuzuki K Poulose
When a replicator port is enabled, we block the traffic on the other port and route all traffic to the new enabled port. If there are two active trace sessions each targeting the two different paths from the replicator, the second session will disable the first session and route all the data to the second path. ETR / e.g, replicator \ ETB If CPU0 is operated in sysfs mode to ETR and CPU1 is operated in perf mode to ETB, depending on the order in which the replicator is enabled one device is blocked. Ideally we need trace-id for the session to make the right choice. That implies we need a trace-id allocation logic for the coresight subsystem and use that to route the traffic. The short term solution is to only manage the "target port" and leave the other port untouched. That leaves both the paths unaffected, except that some unwanted traffic may be pushed to the paths (if the Trace-IDs are not far enough), which is still fine and can be filtered out while processing rather than silently blocking the data. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-25coresight: Convert driver messages to dev_dbgSuzuki K Poulose
Convert component enable/disable messages from dev_info to dev_dbg. When used with perf, the components in the paths are enabled/disabled during each schedule of the run, which can flood the dmesg with these messages. Moreover, they are only useful for debug purposes. So, convert such messages to dev_dbg() which can be turned on as needed. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-14coresight: Moving framework and drivers to SPDX identifierMathieu Poirier
Moving all kernel side CoreSight framework and drivers to SPDX identifier. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-19coresight: Use PTR_ERR_OR_ZERO()Vasyl Gomonovych
Fix ptr_ret.cocci warnings: drivers/hwtracing/coresight/coresight-tpiu.c:163:1-3: WARNING: PTR_ERR_OR_ZERO can be used drivers/hwtracing/coresight/coresight-funnel.c:217:1-3: WARNING: PTR_ERR_OR_ZERO can be used drivers/hwtracing/coresight/coresight-dynamic-replicator.c:166:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci Signed-off-by: Vasyl Gomonovych <gomonovych@gmail.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20coresight: Extend the PIDR mask to cover relevant bits in PIDR2Suzuki K Poulose
As per coresight standards, PIDR2 register has the following format : [2-0] - JEP106_bits6to4 [3] - JEDEC, designer ID is specified by JEDEC. However some of the drivers only use mask of 0x3 for the PIDR2 leaving bits [3-2] unchecked, which could potentially match the component for a different device altogether. This patch fixes the mask and the corresponding id bits for the existing devices. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: replicator: constify amba_idArvind Yadav
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight: Add support for Coresight SoC 600 componentsSuzuki K Poulose
Add the peripheral ids for the Coresight SoC 600 TPIU, replicator and funnel. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight replicator: Expose replicator management registersSuzuki K Poulose
Expose the idfilter* registers of the programmable replicator. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28coresight replicator: Cleanup programmable replicator namingSuzuki K Poulose
The Linux coresight drivers define the programmable ATB replicator as Qualcomm replicator, while this is designed by ARM. This can cause confusion to a user selecting the driver. Cleanup all references to make it explicitly clear. This patch : 1) Replace the compatible string for the replicator : qcom,coresight-replicator1x => arm,coresight-dynamic-replicator 2) Changes the Kconfig symbol (since this is not part of any defconfigs) CORESIGHT_QCOM_REPLICATOR => CORESIGHT_DYNAMIC_REPLICATOR 3) Improves the help message in the Kconfig. 4) Changes the name of the driver and the file : coresight-replicator-qcom => coresight-dynamic-replicator Cc: Pratik Patel <pratikp@codeaurora.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Acked-by: Rob Herring <robh+dt@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-08-04 10:44:39 +0000