summaryrefslogtreecommitdiff
path: root/drivers/iio/pressure
AgeCommit message (Collapse)Author
2019-11-10iio: cros_ec_baro: set info_mask_shared_by_all_available fieldGwendal Grignou
Field was already set for light/proximity and accelerometer/gyroscope/magnetometer sensors. Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose cros_ec_sensors frequency range via iio sysfs") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-27iio: st: Drop GPIO includeLinus Walleij
None of the ST sensor drivers use any symbols from <linux/gpio.h>, just drop the include from all of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-22iio: pressure: zpa2326: fix iio_triggered_buffer_postenable positionAlexandru Ardelean
The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. The iio_triggered_buffer_postenable() should be called before (to attach the poll func) and then the The iio_triggered_buffer_predisable() function is hooked directly without anything, which is probably fine, as the postenable() version seems to also do some reset/wake-up of the device. This will mean it will be easier when removing it; i.e. it just gets removed. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-22iio: pressure: bmp280: use devm action and remove labels from probeBartosz Golaszewski
We can drop some duplicate code if we use devm_action for disabling regulators and pm and the managed variant of iio_device_register(). This allows us to completely remove all remove() callbacks from both i2c and spi code. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-22iio: pressure: bmp280: use bulk regulator opsBartosz Golaszewski
The vddd and vdda supplies are always operated on together. We can shrink the code a bit by using the bulk regulator helpers. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-10-18iio: pressure: bmp280 endian tidy upsJonathan Cameron
There is a somewhat interesting mixture of be16 and le16 going on in this one function. Changes here formalize that a little more. CHECK drivers/iio/pressure/bmp280-core.c drivers/iio/pressure/bmp280-core.c:215:35: warning: cast to restricted __le16 drivers/iio/pressure/bmp280-core.c:229:37: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:229:37: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:229:37: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:229:37: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:230:36: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:230:36: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:230:36: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:230:36: warning: cast to restricted __be16 drivers/iio/pressure/bmp280-core.c:237:37: warning: cast to restricted __le16 Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2019-10-13Merge tag 'iio-for-5.5a-take3' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First set of IIO new device support, cleanups and features for the 5.5 cycle Third version with the adis rework set dropped as better to just have a fresh version of that at some future date. The usual mixed backs of new device support being added to drivers, long term reworks continuing and little per driver cleanups and features. Also a few trivial counter subsystem tidy ups on behalf of William. Core new feature * Device label support. A long requested feature no one got around to implementing before. Allows DT based provision of a 'label' that identifies a device uniquely within a system. This differs from existing 'name' which is meant to be the part number. New device support * ingenic-adc - Support for the JZ4770 SoC ADC including bindings. * inv_mpu6050 - Add support for magnetometer in MPU925x parts. Fiddly to do as this is actually a separate device sitting inside the package, but with the master device being able to schedule reads etc. Will only run if the auxiliary bus is not in use for any other devices. Features * ad7192 - Userspace calibration controls to do zero and full scale. * st_lsm6dsx - Enable latched interrupts by default for sensors events with related clear. - Motion events and related wakeup source. This needed quite a bit of refactoring as well. Cleanups and minor features * ad7192 - sysfs ABI docs * ad7949 - Remove code to readback configuration word as driver never actually enabled it. - Fix incorrect xfer length. Not actually known to cause problems other than wasted bus usage. * adis16080 - Replace core mlock usage with local lock with more appropriate scope. * adis16130 - Remove pointless mlock usage. * adis16240 - Remove include of gpio.h as no gpio usage. * atlas-ph-sensor - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * bh1750 - Fix up a static compiler warning and make the code more readable. - yaml conversion of binding + MAINTAINERS entry. * bmp280 - Drop a stray newline. * cm36651 - Drop a redundant assignment * itg3200 - Alignment cleanup. * max31856 - Add missing of_node and parent references, useful to identify the device. * sc27xx_adc - Use devm_hwspin_lock_request_specific rather than local rolled version. * stm32-lptimer counter - kernel-doc warning. * stm32-timer counter - kernel-doc warning. - Alignment cleanup. * sx9500 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * tcs3414 - Improve logical ordering of buffer predisable / postenable functions. This is part of a longer term rework Alexandru is driving towards. * tag 'iio-for-5.5a-take3' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (41 commits) iio: pressure: bmp280: remove stray newline iio: adc: sc27xx: Use devm_hwspin_lock_request_specific() to simplify code iio: chemical: atlas-ph-sensor: fix iio_triggered_buffer_predisable() position iio: gyro: clean up indentation issue counter: stm32: clean up indentation issue iio: proximity: sx9500: fix iio_triggered_buffer_{predisable,postenable} positions iio: core: Add optional symbolic label to device attributes dt-binding: iio: Add optional label property iio: gyro: adis16080: replace mlock with own lock counter: stm32-lptimer-cnt: fix a kernel-doc warning counter: stm32-timer-cnt: fix a kernel-doc warning iio: gyro: adis16130: remove mlock usage MAINTAINERS: add entry for ROHM BH1750 driver dt-bindings: iio: light: bh1750: convert bindings to yaml iio: imu: st_lsm6dsx: add motion report function and call from interrupt iio: imu: st_lsm6dsx: always enter interrupt thread iio: imu: st_lsm6dsx: add wakeup-source option iio: imu: st_lsm6dsx: add motion events iio: imu: st_lsm6dsx: move interrupt thread to core iio: imu: inv_mpu6050: add fifo support for magnetometer data ...
2019-10-13iio: pressure: bmp280: remove stray newlineBartosz Golaszewski
Remove a stray newline from the probe callback. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-09-19Merge tag 'tag-chrome-platform-for-v5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Benson Leung: "CrOS EC / MFD Migration: - Move cros_ec core driver from mfd into chrome platform. Wilco EC: - Add batt_ppid_info command to Wilco telemetry driver. CrOS EC: - cros_ec_rpmsg : Add support to inform EC of suspend/resume status - cros_ec_rpmsg : Fix race condition on probe failed - cros_ec_chardev : Add a poll handler to receive MKBP events Misc: - bugfixes in cros_usbpd_logger and cros_ec_ishtp" * tag 'tag-chrome-platform-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_usbpd_logger: null check create_singlethread_workqueue platform/chrome: cros_ec_chardev: Add a poll handler to receive MKBP events platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed platform/chrome: chromeos_tbmc: Report wake events mfd: cros_ec: Use mfd_add_hotplug_devices() helper mfd: cros_ec: Add convenience struct to define autodetectable CrOS EC subdevices mfd: cros_ec: Add convenience struct to define dedicated CrOS EC MCUs mfd: cros_ec: Use kzalloc and cros_ec_cmd_xfer_status helper mfd / platform: cros_ec: Reorganize platform and mfd includes mfd / platform: cros_ec: Rename config to a better name mfd: cros_ec: Switch to use the new cros-ec-chardev driver mfd / platform: cros_ec: Miscellaneous character device to talk with the EC mfd / platform: cros_ec: Move cros-ec core driver out from MFD mfd / platform: cros_ec: Handle chained ECs as platform devices platform/chrome: cros_ec_rpmsg: Add host command AP sleep state support platform/chrome: chromeos_laptop: drop checks of NULL-safe functions platform/chrome: wilco_ec: Add batt_ppid_info command to telemetry driver
2019-09-02mfd / platform: cros_ec: Reorganize platform and mfd includesEnric Balletbo i Serra
There is a bit of mess between cros-ec mfd includes and platform includes. For example, we have a linux/mfd/cros_ec.h include that exports the interface implemented in platform/chrome/cros_ec_proto.c. Or we have a linux/mfd/cros_ec_commands.h file that is non related to the multifunction device (in the sense that is not exporting any function of the mfd device). This causes crossed includes between mfd and platform/chrome subsystems and makes the code difficult to read, apart from creating 'curious' situations where a platform/chrome driver includes a linux/mfd/cros_ec.h file just to get the exported functions that are implemented in another platform/chrome driver. In order to have a better separation on what the cros-ec multifunction driver does and what the cros-ec core provides move and rework the affected includes doing: - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c driver from include/linux/mfd/cros_ec.h to a new file include/linux/platform_data/cros_ec_proto.h - Update all the drivers with the new includes, so - Drivers that only need to know about the protocol include - linux/platform_data/cros_ec_proto.h - linux/platform_data/cros_ec_commands.h - Drivers that need to know about the cros-ec mfd device also include - linux/mfd/cros_ec.h Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> Acked-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Tested-by: Gwendal Grignou <gwendal@chromium.org> Series changes: 3 - Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp) Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-08-11iio:st_sensors: remove buffer allocation at each buffer enableDenis Ciocca
This patch is removing the buffer allocation at each buffer enable. We just allocate enough memory in the main structure during probe to cover maximum size needed (that anyway is pretty small) [16bytes]. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05iio: remove get_irq_data_ready() function pointer and use IRQ number directlyDenis Ciocca
Not even sure why it was there since the beginning. Just use IRQ number in the sensor_data struct. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-08-05iio:pressure: preenable/postenable/predisable fixup for ST press bufferDenis Ciocca
This patch is trying to cleanup for good the buffers operation functions. There is no need of using preenable, all can be done into postenable. Let's also use logical sequence of operations as already done in accel driver. Finally also rename the goto label using operation to perform and not where it fails. Not stable material as not fixing a 'bug' but rather bringing the driver in line with general 'patterns' to allow a subsystem wide cleanup. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: pressure: hp03: convert to i2c_new_dummy_deviceWolfram Sang
Move from i2c_new_dummy() to i2c_new_dummy_device(), so we now get an ERRPTR which we use in error handling. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: make st_sensors drivers use regmapDenis Ciocca
This patch is meant to replace the i2c/spi transfer functions with regmap. SPI framework requires DMA safe buffers so let's add GFP_DMA flag for memory allocation used by bulk_read functions. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: move 3-wire spi initialization to st_sensors_spiDenis Ciocca
Some devices need to be configured with special bit in order to use spi 3-wire. This was done during device identification phase. Instead, let's move this part as spi specific. Doing this the check_device_support function becomes a simple device id check, so let's rename it. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio:pressure: device settings are set immediately during probeDenis Ciocca
This patch set pressure settings right after probe start. This is done in preparation of regmap that needs different configuration based on multiread bit value. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio:pressure: introduce st_press_get_settings() functionDenis Ciocca
The function is introduced to retrieve press device settings. It will be used by probe in order to configure regmap. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: cros_ec: Remove replacing error code with -EIOGwendal Grignou
Due to an API misread, error code can be different for -EIO when reading a sysfs entry. Return the error reported by the cros_ec stack. Check the proper error message (protocol error, not supported) is reported when there is an error returned by the EC stack. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-27iio: cros_ec: Add calibscale for 3d MEMSGwendal Grignou
Add calibration scale support to accel, gyro and magnetometer. Check on eve with current firmware, check reading calibscale returns 1.0, check with newer firmware values are applied. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-07-01Merge tag 'iio-for-5.3b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO device support, features, cleanups and minor fixes for 5.3. A few bits for the counters subsystem mixed in here as well. There are some late breaking fixes as well, which aren't so urgent they can't wait for the merge window. New Device Support * adf4371 - New driver + bindings. - Support the adf4372 PLL. Mostly ID and bindings. * ad8366 (note includes rework of driver needed to allow support for these). - Support the ADL5240 variable gain amplifier (VGA). - Support the ADA4961 digital gain amplifier (DGA). * dps310 - New driver, in several parts from different authors for this temp and pressure sensor. - Includes errata workaround for a temperature reading issue. * stk3310 - Support the stk3335, mostly ID. Features and cleanups * core - drop error handling on debugfs registration. - harden by making sure we don't overrun iio_chan_info_postfix. * docs - convert remaining docs to rst. At somepoint we'll fit these few into the main IIO docs. - improve sampling_frequency_available docs but explaining the range form. * ad_sigma_delta - Drop a pointless goto. * ad2s1210 - Drop pointless platform data null check seeing as we don't actually use platform data anymore. * ad7124 - Relax limitation on channel numbers to allow pseudo different channels. - Support control of whether the input is buffered via DT. - Use dynamic allocation for channel configuration to make it easier to support new devices. - YAML binding conversion. * ad7150 - Comment tidy up. - Consistent and simple if (ret) handling of i2c errors. - FIELD_GET and GENMASK. - Ternary rather than !!(condition) for readability. - Use macros to avoid repetition of channel definitions. * ad7606 - Add software channel config (rather that pin controlled) - Refactor to simplify addition of new part in future. * ad7746 - of_deivce_id table. * ad7780 - MAINTAINERS entry - YAML DT bindings. * ad8366 - Stop using core mlock in favour of well scoped local lock. - SPDX + copyright date update. * ad9834 - of_device_id table * adf4371 - Add support for output stage muting before lock on has occured. * adis library - MAINTAINERS entry to reflect that this now Alexandru's problem ;) * adis162xx: - Fix a slightly incorrect set of comments and print statements on minimum supported voltage. * adis16203 - of_device_id table. * adis16240 - Add of_device_id table (in two parts as first patch only used it for MODULE_DEVICE_TABLE.) * adt7316-spi - of_device_id table * adxl372 - YAML DT binding conversion. - Cleanup use of buffer callback functions (precursor to core rework). * bh1710 - Simplify getting the i2c adapter from the client. * dht11 - Mote to newer GPIO consumer interface. * kxcjk-1013.c - Add binding for sensor in display of some ultrabooks after userspace tools updated for it not be a problem to report two similar sensors. * imx7d - drop unused variables. - white space - define instead of variable for clock frequency that is fixed. - drop pointless error message. * messon_saradc - SPDX * sps30 - MAINTAINERS entry - YAML binding conversion. * st_accel - Tidy up ordering in various buffer related callbacks. This is part of a long running effort to simplify the core code. * stm32-dfsdm: - Manage the resolution cleanly in triggerd modes. - Add fast mode support which allows more flexible filter choices. - Add a comment on the reason for a 16 bit record when technically not 'required'. * st_lsm6dsx - Embed device name in the sensor_settings struct as i3c doesn't have a convenient name field to use for this. * xilinx-adc - Relax constraints on supported platforms to reflect that this can used with FPGAs on PCIe cards and hence many architectures. * counters/ftm-quaddec - Fix some formatting io MODULE_AUTHOR - MAINTAINERS entry Fixes * tools - fix incorrect handling of 32 bit channels. * sca3000 - Potential endian bug that is unlikely to bite anyone (be64 host seems unlikely for this old part). * stm32-adc - Add vdda-supply. On some boards it needs to be turned on to supply the ADC. DT bindings included. * stm32-dfsdm - Fix output resolution to work with filter orders other than 3. - Fix output datatype as it's signed and previously claimed not to be. * tag 'iio-for-5.3b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (68 commits) iio: iio-utils: Fix possible incorrect mask calculation iio: frequency: adf4371: Add support for output stage mute dt-bindings: iio: frequency: Add ADF4372 PLL documentation iio: frequency: adf4371: Add support for ADF4372 PLL dt-bindings: iio: adc: Add buffered input property Convert AD7124 bindings documentation to YAML format. iio: adc: ad7124: Shift to dynamic allocation for channel configuration iio: adc: ad7124: Add buffered input support iio: adc: ad7124: Remove input number limitation MAINTAINERS: add ADIS IMU driver library entry iio: adis162xx: fix low-power docs & reports counter/ftm-quaddec: Add missing '>' in MODULE_AUTHOR iio: core: no need to check return value of debugfs_create functions docs: iio: convert to ReST iio: adc: stm32-adc: add missing vdda-supply dt-bindings: iio: adc: stm32: add missing vdda supply iio: adc: stm32-dfsdm: add comment for 16 bits record iio: adc: stm32-dfsdm: add fast mode support iio: adc: stm32-dfsdm: manage data resolution in trigger mode iio: adc: stm32-dfsdm: fix data type ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-08iio: dps310: Add pressure sensing capabilityEddie James
The DPS310 supports measurement of pressure, so support that in the driver. Use background measurement like the temperature sensing and default to lowest precision and lowest measurement rate. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 330Thomas Gleixner
Based on 1 normalized pattern(s): this file is subject to the terms and conditions of version 2 of the gnu general public license see the file copying in the main directory of this archive for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 55 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.108941081@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 309Thomas Gleixner
Based on 2 normalized pattern(s): it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 11 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000434.249870634@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 177Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the gpl 2 extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 135 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528170026.071193225@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 174Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 655 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157Thomas Gleixner
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27iio: dps310: Temperature measurement errataChristopher Bostic
Add a manufacturer's suggested workaround to deal with early revisions of chip that don't indicate correct temperature. Readings can be in the ~60C range when they should be in the ~20's. Signed-off-by: Christopher Bostic <cbostic@linux.vnet.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-27iio: Add driver for Infineon DPS310Joel Stanley
The DPS310 is a temperature and pressure sensor. It can be accessed over i2c and SPI, but this driver only supports polling over i2c. Signed-off-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04iio: cros_ec: Switch to SPDX identifier.Enric Balletbo i Serra
Adopt the SPDX license identifier headers to ease license compliance management. Also fix MODULE_LICENSE for cros_ec_accel_legacy to match the SPDX and boiler plate license. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: cros_ec: Drop unnecessary include filesGuenter Roeck
The cros_ec sensors drivers do not call any sysfs functions or use any sysfs defines, and thus do not need to include linux/sysfs.h. Also, some cros_ec drivers include linux/delay.h and is not used. Signed-off-by: Guenter Roeck <groeck@chromium.org> [remove linux/delay.h] Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-04iio: pressure: bmp280: BMP280 calibration to entropyLinus Walleij
The BMP280/BME280 calibration data should also go into the entropy pool, like we do for BMP180. This just adds the temperature and pressure calibration, the humidity calibration seems like too much annoying calls to add. Cc: Tomasz Duszynski <tduszyns@gmail.com> Cc: Stefan Tatschner <stefan.tatschner@gmail.com> Cc: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-19iio:st_pressure:initial lps22hh sensor supportmario tesi
Initial support for ST LPS22HH pressure sensor. Datasheet: http://www2.st.com/resource/en/datasheet/lps22hh.pdf Features: * pressure, temperature data and timestamping channels * sampling frequency selection [1..200] Hz * interrupt based trigger * over I2C or SPI interface Signed-off-by: mario tesi <mario.tesi@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-16iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbersHans de Goede
Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer. This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this. While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-09-08iio: pressure: ms5611: switch to SPDX identifierTomasz Duszynski
Drop boilerplate license text and use SPDX identifier instead. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-08-19iio: pressure: ms5611: remove deprecated compatible stringsTomasz Duszynski
Compatible strings tend to follow manufacturer,model format. In case one wants to do a matching with manufacturer stripped off he can still do so since SPI/I2C core will try id_table based matching anyway. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-07-25Merge tag 'iio-for-4.19b' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: Second set of IIO new device support, features and cleanups. There are also a couple of fixes that can wait for the coming merge window. Core new features * Support for phase channels (used in time of flight sensors amongst other things) * Support for deep UV light channel modifier. New Device Support * AD4758 DAC - New driver and dt bindings. * adxl345 - Support the adxl375 +-200g part which is register compatible. * isl29501 Time of flight sensor. - New driver * meson-saradc - Support the Meson8m2 Socs - right now this is just an ID, but there will be additional difference in future. * mpu6050 - New ID for 6515 variant. * si1133 UV sensor. - New driver * Spreadtrum SC27xx PMIC ADC - New driver and dt bindings. Features * adxl345 - Add calibration offset readback and writing. - Add sampling frequency control. Fixes and Cleanups * ad5933 - Use a macro for the channel definition to reduce duplication. * ad9523 - Replace use of core mlock with a local lock. Part of ongoing efforts to avoid confusing the purpose of mlock which is only about iio core state changes. - Fix displayed phase which was out by a factor of 10. * adxl345 - Add a link to the datasheet. - Rework the use of the address field in the chan_spec structures to allow addition of more per channel information. * adis imu - Mark switch fall throughs. * at91-sama5d2 - Fix some casting on big endian systems. * bmp280 - Drop some DT elements that aren't used and should mostly be done from userspace rather than in DT. * hx711 - add clock-frequency dt binding and resulting delay to deal with capacitance issue on some boards. - fix a spurious unit-address in the example. * ina2xx - Avoid a possible kthread_stop with a stale task_struct. * ltc2632 - Remove some unused local variables (assigned but value never used). * max1363 - Use device_get_match_data to remove some boilerplate. * mma8452 - Mark switch fall throughs. * sca3000 - Fix a missing return in a switch statement (a bad fallthrough previously!) * sigma-delta-modulator - Drop incorrect unit address from the DT example. * st_accel - Use device_get_match_data to drop some boiler plate. - Move to probe_new for i2c driver as second parameter not used. * st_sensors library - Use a strlcpy (safe in this case). * st_lsm6dsx - Add some error logging. * ti-ads7950 - SPDX - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms EV3 where some channels are used for power supply monitoring at a very low rate. * ti-dac5571 - Remove an unused variable. * xadc - Drop some dead code.
2018-07-15iio: change strncpy+truncation to strlcpyDominique Martinet
Generated by scripts/coccinelle/misc/strncpy_truncation.cocci Signed-off-by: Dominique Martinet <asmadeus@codewreck.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-06-24iio: pressure: bmp280: fix relative humidity unitTomasz Duszynski
According to IIO ABI relative humidity reading should be returned in milli percent. This patch addresses that by applying proper scaling and returning integer instead of fractional format type specifier. Note that the fixes tag is before the driver was heavily refactored to introduce spi support, so the patch won't apply that far back. Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com> Fixes: 14beaa8f5ab1 ("iio: pressure: bmp280: add humidity support") Acked-by: Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-05-11Merge tag 'iio-for-4.18a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: 1st round of IIO new device support, features and cleanup for the 4.18 cycle A nice mix this time of excellent cleanups (many to send drivers speeding toward staging graduations) and new drivers / device support. A good part of this is Brian Masney's never ending task on the tsl2x7x driver. The end is in sight so hopefully we'll get that one out of staging very soon! New device support * AD5686 - Support AD5685R (was wrongly present as AD5685) - Support AD5672R, AD5676, AD5676, AD5684R and AD5686R 4 and 8 channel SPI DACs with various precisions. - Support AD5671R, AD5675R, AD5694, AD5694R, AD5695R, AD5696 and AD5696R I2C DACs with various percisions and numbers of channels. * Analog front end rescale driver - New driver. - Support current sensing usings a shunt resistor. - Support simple voltage dividers. - support simple current sense amplifiers. * TI dac5571 - New driver and device bindings supporting: dac5571, dac6571, dac7571, dac5574, dac6574, dac7574, dac5573, dac6573 and dac7573 * Meson-adc - Support for Meson AXG with DT bindings. * mpu6050 - Support the mpu9255 which only requires additional WHOAMI entry and compatible string. * st_lsm6dsx - Support for lsm330dlc combinded accelerometer and gyro sensors with DT bindings. * stm32_adc - Add support for STM32MP1 with bindings. Staging graduations * adis16201 after some excelent cleanup by Himanshu Jha. * adis16029 after some excelent cleanup by Shreeya Patel. New features: * ABI docs - Add core ABI docs for angle channels. * inv_mpu6050 - Provide support for the full range of interrupts the device supports. * st_accel - Add SMO8840 ACPI ID seen in the wild on some Lenovo machines. * stx104 - Provide a multiple gpio get function. Cleanups / Minor fixes * core - Use new nested structure support to improve kernel-doc. * ad2s1200 - Use be16_to_cpup instead of opencoding. * ad5686 - Indentation tidy up. - Switch to SPDX - Refactor to allow various numbers of channels. - Refactor to separate core and SPI specific support, prior to addition of i2c equivalent devices. * ad7606 - Use drvdata directly from device rather than boucing via the platform_device structure. * ad7746 - Replace opencoded byte swapped i2c calls with _swapped variants. - White space and line break readability improvements. - Reorder includes and variable declarations where appropriate. * ad7791 - Changes to the AD ADC library used by this driver took in the sampling frequency. This lead to be the wrong path being the one tied to the resulting attribute, so it didn't work, and a warning to be printed. * ad7780 - Remove apparent support for sampling frequency control on devices that don't support changing the sampling attributes. * ade7854 - Fix a read of the wrong number of bits. - Improve error handling on i2c read/write errors. - Rework i2c and spi code to reduce duplication. * adis16201 (staging) - Improve meaning inherent in some macro names by adding units etc where relevant. - Adjust comments to improve detail and drop the irrelevant. - Rename register address definitions definitions to add a _REG postfix, clearly separating them from field definitions. Reorganize the definitions to group register address and fields. - Use sign_extend32 rather than open coding. - Reverse Xmas tree ordering where appropriate and align function args. - Remove unused headers. - Use GENMASK where appropriate instead of open coding. * adis16209 (staging) - Indent field definitions to visually separate them from register address definitions. - Use reverse xmas tree ordering where appropriate. - Add some whitespace where it will help readability. - Drop some unused headers. - Use GENMASK where appropriate. * ad2s1200 - Drop unnecessary includes and reorder alphabetically. - Reverse xmas tree and blank line cleanups. * atlas-ph-sensor - Use msleep instead of usleep_range where the precise value doesn't matter and the delays are long. * bcm150 - Drop transaction splitting as core now handles it. * cros_ec - Move the shared header to the include/iio/common directory. This brings it inline with the other multiple type devices. - Use drvdata directly from device rather than boucing via the platform_device structure. * hid-sensors - Use drvdata directly from device rather than boucing via the platform_device structure. * inv_mpu6050 - Clear out a second function definition for the same function. - Don't flush fifo when the iio buffer is full but just drop excess data. - Tidy up set_power_itg and ensure it is used in the right places. - Use set_power_itg rather than opencoding it again in the i2c mux control. - Make sure error paths disable the power if undoing power on. - Used managed devm_ functions during probe. Delete remove function. - Refactor to pull raw data read out of read_raw function. - Simplify data reading error paths. - Only enable the i2c mux for chips with the i2c aux bus (not icm20608) - Fix a potential deadlock due to varying lock ordering. - Fix an issue where first sample from gyro after enabling is unstable by dropping the first sample. - Fix an issue where the user_ctrl register is incorrectly overwritten. - Tidy up some grammar and spelling minor issus. * mcp320x - Use vendor compatible strings. * mcp4018 - Switch to using i2c .probe_new. * mcp4351 - switch to using i2c .probe_new. * meson-adc - rework handing on common ADC platform data so it can be shared across multiple families of SoCs. * sca3000 - Fix an error handling path if the ring configure fails. * st_lsm6dsx - Fix a wrong fifo threshold mask (no actual effect) * stm32-dfsdm - Style fixes and cleanups. - Check filter ID is in range and check spi-max-frequency. * tsl2x7x (staging) - Drop some unnecessary function calls, unused variables and unnecessary local variables. - Fix wrong interrupt type. - Avoid unnecessary double clear of interrupt. - Simplify proximity calibration call which did various things unrelated to actually calibrating. - Separate control of the proximity and ALS interrupts. - Improve consistency of logging. - Separate ALS and proximity persistence settings as they have separate hardware controls. - Tidy up variable ordering. - Add Brian to copyright notice given consider work on this driver. - Take advantage of hardware support for I2C address auto increment. - Combine individuaal enable and period attributes for the two directions on the threshold events into a single value as the hardware doesn't separate them. - Move integration_time* attributes from light channel to intensity value as they effect the intensity readings directly and the light reading only indirectly. Hence this better reflects reality. Also move the calibscale_available. - Avoid returning an error in the IRQ handler. - Hard code the reg value in _clear_interrupts as it only takes one value in the code. Result is the function has little purpose so opencode the two remaining i2c_smbus_write_byte calls. - Drop some unnecessary checking of the chip status register. - Tidy up return path in _write_interrupt_config. - Tidy up the ID verification code. - Move the power and diode settings defines into the header as these are needed for platform data configuration. - Various renames and comment cleanups for consistency and clarity. - Use actual device defaults for default startup settings. - SPDX - Add some range sanity checking to sysfs attribute writes. - Don't provide event interfaces if the interrupt line isn't available. - Use IIO_CONST_ATTR macro for calibscale_available as it's a constant string. - Fix the integration time and lux equations. - Make device IDs explicit index values in the device_channel_config array.
2018-03-28Merge 4.16-rc7 into staging-nextGreg Kroah-Hartman
We want the IIO and staging driver fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-17iio: cros_ec: Move cros_ec_sensors_core.h in /includeGwendal Grignou
Similar to other common iio frameworks, move cros_ec_sensors_core.h from drivers/iio/common/cros_ec_sensors/ to include/linux/iio/common. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-03-10iio: st_pressure: st_accel: pass correct platform data to initMichael Nosthoff
Commit 7383d44b added a pointer pdata which get set to the default platform_data when non was defined in the device. But it did not pass this pointer to the st_sensors_init_sensor call but still used the maybe uninitialized platform_data from dev. This breaks initialization when no platform_data is given and the optional st,drdy-int-pin devicetree option is not set. This commit fixes this. Cc: stable@vger.kernel.org Fixes: 7383d44b ("iio: st_pressure: st_accel: Initialise sensor platform data properly") Signed-off-by: Michael Nosthoff <committed@heine.so> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-02-17iio:pressure:ms5611: Fix coding style in probe functionrodrigosiqueira
This patch fixes the checkpatch.pl warning and error: iio/pressure/ms5611.h:66: ERROR: code indent should use tabs where possible iio/pressure/ms5611.h:66: WARNING: please, no spaces at the start of a line iio/pressure/ms5611.h:66: ERROR: "foo* bar" should be "foo *bar" Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-01-08iio:pressure:bmp280: Read calibration data in probeStefan Tatschner
This patch affects BME280 and BMP280. The readout of the calibration data is moved to the probe function. Each sensor data access triggered reading the full calibration data before this patch. According to the datasheet, Section 4.4.2., the calibration data is stored in non-volatile memory. Since the calibration data does not change, and cannot be changed by the user, we can reduce bus traffic by reading the calibration data once. Additionally, proper organization of the data types enables removing some odd casts in the compensation formulas. Signed-off-by: Stefan Tatschner <stefan.tatschner@gmail.com> Tested-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-13Merge tag 'staging-4.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO updates from Greg KH: "Here is the "big" staging and IIO driver update for 4.15-rc1. Lots and lots of little changes, almost all minor code cleanups as the Outreachy application process happened during this development cycle. Also happened was a lot of IIO driver activity, and the typec USB code moving out of staging to drivers/usb (same commits are in the USB tree on a persistent branch to not cause merge issues.) Overall, it's a wash, I think we added a few hundred more lines than removed, but really only a few thousand were modified at all. All of these have been in linux-next for a while. There might be a merge issue with Al's vfs tree in the pi433 driver (take his changes, they are always better), and the media tree with some of the odd atomisp cleanups (take the media tree's version)" * tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits) staging: lustre: add SPDX identifiers to all lustre files staging: greybus: Remove redundant license text staging: greybus: add SPDX identifiers to all greybus driver files staging: ccree: simplify ioread/iowrite staging: ccree: simplify registers access staging: ccree: simplify error handling logic staging: ccree: remove dead code staging: ccree: handle limiting of DMA masks staging: ccree: copy IV to DMAable memory staging: fbtft: remove redundant initialization of buf staging: sm750fb: Fix parameter mistake in poke32 staging: wilc1000: Fix bssid buffer offset in Txq staging: fbtft: fb_ssd1331: fix mirrored display staging: android: Fix checkpatch.pl error staging: greybus: loopback: convert loopback to use generic async operations staging: greybus: operation: add private data with get/set accessors staging: greybus: loopback: Fix iteration count on async path staging: greybus: loopback: Hold per-connection mutex across operations staging: greybus/loopback: use ktime_get() for time intervals staging: fsl-dpaa2/eth: Extra headroom in RX buffers ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>