summaryrefslogtreecommitdiff
path: root/drivers/media/usb/cx231xx/cx231xx-cards.c
AgeCommit message (Collapse)Author
2017-12-28media: move dvb kAPI headers to include/mediaMauro Carvalho Chehab
Except for DVB, all media kAPI headers are at include/media. Move the headers to it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-12-08media: cx231xx: Add support for The Imaging Source DFG/USB2proRomain Reignier
Note that the inputs for the Composite and S-Video are inverted in regard to most of the other boards using a cx231xx chip. Signed-off-by: Romain Reignier <r.reignier@robopec.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
2017-10-31media: cx231xx: Fix NTSC/PAL on Astrometa T2hybridOleh Kravchenko
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: cx231xx: Fix NTSC/PAL on Evromedia USB Full Hybrid Full HDOleh Kravchenko
Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-31media: rc: mceusb: add support for 1b80:d3b2Oleh Kravchenko
Evromedia USB Full Hybrid Full HD (1b80:d3b2) has IR on Interface 0. Remote controller supplied with this tuner fully compatible with RC_MAP_MSI_DIGIVOX_III. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-10-04[media] cx231xx-cards: fix NULL-deref on missing association descriptorJohan Hovold
Make sure to check that we actually have an Interface Association Descriptor before dereferencing it during probe to avoid dereferencing a NULL-pointer. Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Johan Hovold <johan@kernel.org> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2017-06-06[media] cx231xx: Initial support Astrometa T2hybridOleh Kravchenko
This patch provide only digital support; The device is based on 24C02N EEPROM, Panasonic MN88473 demodulator, Rafael Micro R828D tuner and CX23102-11Z chipset; USB id: 15f4:0135. Status: - DVB-T/T2 works fine; - Composite works fine; - Analog not implemented. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-04-10[media] cx231xx-cards: fix NULL-deref at probeJohan Hovold
Make sure to check the number of endpoints to avoid dereferencing a NULL-pointer or accessing memory beyond the endpoint array should a malicious device lack the expected endpoints. Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Cc: Sri Deevi <Srinivasa.Deevi@conexant.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-03-03[media] tveeprom: get rid of unused arg on tveeprom_hauppauge_analog()Mauro Carvalho Chehab
tveeprom_hauppauge_analog() used to need the I2C adapter in order to print debug messages. As it now uses pr_foo() facilities since commit 6037b3ca28f4 ("[media] tveeprom: print log messages using pr_foo()"), the first argument of the function is not needed anymore. So, get rid of it. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-02-07[media] cx231xx: Initial support Evromedia USB Full Hybrid Full HDOleh Kravchenko
This patch provide only digital support. The device is based on Si2168 30-demodulator, Si2158-20 tuner and CX23102-11Z chipset; USB id: 1b80:d3b2. Status: - DVB-T2 works fine; - Composite and SVideo works fine; - Analog not implemented. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05[media] cx231xx-cards: unregister IR earlierMauro Carvalho Chehab
Without this patch, a bug is issued when the module is removed: [ 1417.425863] cx231xx 1-3.1.4:1.1: Cx231xx dvb Extension removed [ 1417.571923] BUG: unable to handle kernel paging request at ffffffffc081a024 [ 1417.571962] IP: [<ffffffff813da854>] string+0x24/0x80 [ 1417.571987] PGD 1c09067 PUD 1c0b067 PMD 88e653067 PTE 0 [ 1417.572013] Oops: 0000 [#1] SMP [ 1417.572026] Modules linked in: mb86a20s dvb_core cx231xx_alsa ir_kbd_i2c(-) tda18271 tea5767 tuner cx25840 cx231xx i2c_mux videobuf_vmalloc tveeprom cx2341x videobuf_core rc_core v4l2_common videodev media bnep usblp fuse xt_CHECKSUM iptable_mangle tun ebtable_filter ebtables ip6table_filter ip6_tables xt_physdev br_netfilter bridge nf_log_ipv4 nf_log_common xt_LOG xt_conntrack ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack cpufreq_stats vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic intel_rapl x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel snd_hda_intel snd_hda_codec kvm snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm irqbypass crct10dif_pclmul iTCO_wdt crc32_pclmul nfsd hci_uart iTCO_vendor_support [ 1417.572317] snd_timer ghash_clmulni_intel btbcm intel_cstate btqca snd intel_uncore btintel intel_rapl_perf mei_me bluetooth mei shpchp soundcore pcspkr i2c_i801 auth_rpcgss wmi acpi_als kfifo_buf nfs_acl industrialio rfkill lockd pinctrl_sunrisepoint pinctrl_intel tpm_tis tpm intel_lpss_acpi intel_lpss acpi_pad grace sunrpc binfmt_misc hid_logitech_hidpp hid_logitech_dj 8021q garp stp llc mrp i915 i2c_algo_bit drm_kms_helper drm e1000e sdhci_pci sdhci mmc_core crc32c_intel ptp pps_core video i2c_hid fjes analog gameport joydev [last unloaded: rc_pixelview_002t] [ 1417.572487] CPU: 4 PID: 24493 Comm: rmmod Tainted: G W 4.7.0+ #2 [ 1417.572504] Hardware name: /NUC6i7KYB, BIOS KYSKLi70.86A.0041.2016.0817.1130 08/17/2016 [ 1417.572526] task: ffff880894b81e80 ti: ffff880896bdc000 task.ti: ffff880896bdc000 [ 1417.572544] RIP: 0010:[<ffffffff813da854>] [<ffffffff813da854>] string+0x24/0x80 [ 1417.572564] RSP: 0018:ffff880896bdfbe8 EFLAGS: 00010286 [ 1417.572577] RAX: ffffffffc081a025 RBX: ffff8808935aa15c RCX: ffff0a00ffffff04 [ 1417.572594] RDX: ffffffffc081a024 RSI: ffffffffffffffff RDI: ffff8808935aa15c [ 1417.572610] RBP: ffff880896bdfbe8 R08: fffffffffffffffe R09: ffff8808935aa91c [ 1417.572628] R10: ffffffffc07b85d6 R11: 0000000000000000 R12: ffff8808935aa91c [ 1417.572644] R13: 00000000000007c5 R14: ffffffffc07b85dd R15: ffffffffc07b85dd [ 1417.572662] FS: 00007f5a5392d700(0000) GS:ffff8808bed00000(0000) knlGS:0000000000000000 [ 1417.572681] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1417.572705] CR2: ffffffffc081a024 CR3: 0000000897188000 CR4: 00000000003406e0 [ 1417.572735] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1417.572761] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1417.572778] Stack: [ 1417.572785] ffff880896bdfc48 ffffffff813dcf77 0000000000000005 ffff8808935aa157 [ 1417.572806] ffff880896bdfc58 ffff0a00ffffff04 000000009d27375e ffff8808935aa000 [ 1417.572829] 0000000000000800 ffff880896182800 0000000000000000 ffff88089e898ae0 [ 1417.572850] Call Trace: [ 1417.572860] [<ffffffff813dcf77>] vsnprintf+0x2d7/0x500 [ 1417.572873] [<ffffffff813d3e12>] add_uevent_var+0x82/0x120 [ 1417.572890] [<ffffffffc07b534d>] rc_dev_uevent+0x2d/0x60 [rc_core] [ 1417.572907] [<ffffffff81515969>] dev_uevent+0xd9/0x2d0 [ 1417.572921] [<ffffffff813d4309>] kobject_uevent_env+0x2d9/0x4f0 [ 1417.572938] [<ffffffff813d452b>] kobject_uevent+0xb/0x10 [ 1417.572954] [<ffffffff81513a3f>] device_del+0x18f/0x260 [ 1417.572974] [<ffffffff813d2db7>] ? kobject_put+0x27/0x50 [ 1417.572998] [<ffffffffc07b5e25>] rc_unregister_device+0x75/0xb0 [rc_core] [ 1417.573028] [<ffffffffc07e6023>] ir_remove+0x23/0x30 [ir_kbd_i2c] [ 1417.573055] [<ffffffff8162bf88>] i2c_device_remove+0x58/0xb0 [ 1417.573078] [<ffffffff81518191>] __device_release_driver+0xa1/0x160 [ 1417.573102] [<ffffffff81518de6>] driver_detach+0xa6/0xb0 [ 1417.573122] [<ffffffff81517b25>] bus_remove_driver+0x55/0xd0 [ 1417.573146] [<ffffffff815195bc>] driver_unregister+0x2c/0x50 [ 1417.573168] [<ffffffff8162cf62>] i2c_del_driver+0x22/0x50 [ 1417.573194] [<ffffffffc07e6ba4>] ir_kbd_driver_exit+0x10/0x46c [ir_kbd_i2c] [ 1417.573227] [<ffffffff81126348>] SyS_delete_module+0x1b8/0x220 [ 1417.573254] [<ffffffff817debf2>] entry_SYSCALL_64_fastpath+0x1a/0xa4 [ 1417.573279] Code: eb e9 76 ff ff ff 90 55 49 89 f1 48 89 ce 48 c1 fe 30 48 81 fa ff 0f 00 00 48 89 e5 4c 8d 46 ff 76 40 48 85 f6 74 4e 48 8d 42 01 <0f> b6 12 84 d2 74 43 49 01 c0 31 f6 eb 0c 48 83 c0 01 0f b6 50 [ 1417.573437] RIP [<ffffffff813da854>] string+0x24/0x80 [ 1417.573455] RSP <ffff880896bdfbe8> [ 1417.573465] CR2: ffffffffc081a024 [ 1417.580053] ---[ end trace 4ca9e2eced326a62 ]--- Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-09-05[media] cx231xx: fix GPIOs for Pixelview SBTVD hybridMauro Carvalho Chehab
This device uses GPIOs: 28 to switch between analog and digital modes: on digital mode, it should be set to 1. The code that sets it on analog mode is OK, but it misses the logic that sets it on digital mode. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-02-23[media] media_device: move allocation out of media_device_*_initMauro Carvalho Chehab
Right now, media_device_pci_init and media_device_usb_init does media_device allocation internaly. That preents its usage when the media_device struct is embedded on some other structure. Move memory allocation outside it, to make it more generic. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-23[media] media-device: move PCI/USB helper functions from v4l2-mcMauro Carvalho Chehab
Those ancillary functions could be called even when compiled without V4L2 support, as warned by ktest build robot: All errors (new ones prefixed by >>): >> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/dvb-usb/dvb-usb.ko] undefined! >> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/dvb-usb-v2/dvb_usb_v2.ko] undefined! >> ERROR: "__v4l2_mc_usb_media_device_init" [drivers/media/usb/au0828/au0828.ko] undefined! Also, there's nothing there that are specific to V4L2. So, move those ancillary functions to MC core. No functional changes. Just function rename. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] cx231xx: create connectors at the media graphMauro Carvalho Chehab
We need to add connectors to the cx231xx graph. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] cx231xx: use v4l2 core function to create the MC graphMauro Carvalho Chehab
Instead of having its own routine, use the one defined at the core, as it is generic enough to handle the cx231xx usecases. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16[media] use v4l2_mc_usb_media_device_init() on most USB devicesMauro Carvalho Chehab
Except for the usbuvc driver (with has an embedded media_device struct on it), the other drivers have a pointer to media_device. On those drivers, replace their own implementation for the core one. That warrants that those subdev drivers will fill the media_device info the same way. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-01[media] tuner.h: rename TUNER_PAD_IF_OUTPUT to TUNER_PAD_OUTPUTMauro Carvalho Chehab
The output of a tuner is not only IF frequencies. They may also output audio on some of its pins, and may even be a zero-IF tuner, with outputs a baseband. So, rename the PAD name to make it clearer and add a proper documentation about that at tuner.h. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] usb: check media device errorsMauro Carvalho Chehab
There are now two new warnings: drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_media_device_register': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:433:2: warning: ignoring return value of '__media_device_register', declared with attribute warn_unused_result [-Wunused-result] media_device_register(adap->dvb_adap.mdev); ^ drivers/media/usb/dvb-usb/dvb-usb-dvb.c: In function 'dvb_usb_media_device_register': drivers/media/usb/dvb-usb/dvb-usb-dvb.c:128:2: warning: ignoring return value of '__media_device_register', declared with attribute warn_unused_result [-Wunused-result] media_device_register(adap->dvb_adap.mdev); ^ Those are because the drivers are not properly checking if the media device init and register were succeeded. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media-device: split media initialization and registrationJavier Martinez Canillas
The media device node is registered and so made visible to user-space before entities are registered and links created which means that the media graph obtained by user-space could be only partially enumerated if that happens too early before all the graph has been created. To avoid this race condition, split the media init and registration in separate functions and only register the media device node when all the pending subdevices have been registered, either explicitly by the driver or asynchronously using v4l2_async_register_subdev(). The media_device_register() had a check for drivers not filling dev and model fields but all drivers in mainline set them and not doing it will be a driver bug so change the function return to void and add a BUG_ON() for dev being NULL instead. Also, add a media_device_cleanup() function that will destroy the graph_mutex that is initialized in media_device_init(). [mchehab@osg.samsung.com: Fix compilation if !CONFIG_MEDIA_CONTROLLER and remove two warnings added by this changeset] Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] uapi/media.h: Rename entities types to functionsMauro Carvalho Chehab
Rename the userspace types from MEDIA_ENT_T_ to MEDIA_ENT_F_ and add the backward compatibility bits. The changes at the .c files was generated by the following coccinelle script: @@ @@ -MEDIA_ENT_T_UNKNOWN +MEDIA_ENT_F_UNKNOWN @@ @@ -MEDIA_ENT_T_DVB_BASE +MEDIA_ENT_F_DVB_BASE @@ @@ -MEDIA_ENT_T_V4L2_BASE +MEDIA_ENT_F_V4L2_BASE @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_BASE +MEDIA_ENT_F_V4L2_SUBDEV_BASE @@ @@ -MEDIA_ENT_T_CONNECTOR_BASE +MEDIA_ENT_F_CONNECTOR_BASE @@ @@ -MEDIA_ENT_T_V4L2_VIDEO +MEDIA_ENT_F_IO_V4L @@ @@ -MEDIA_ENT_T_V4L2_VBI +MEDIA_ENT_F_IO_VBI @@ @@ -MEDIA_ENT_T_V4L2_SWRADIO +MEDIA_ENT_F_IO_SWRADIO @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_UNKNOWN +MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN @@ @@ -MEDIA_ENT_T_CONN_RF +MEDIA_ENT_F_CONN_RF @@ @@ -MEDIA_ENT_T_CONN_SVIDEO +MEDIA_ENT_F_CONN_SVIDEO @@ @@ -MEDIA_ENT_T_CONN_COMPOSITE +MEDIA_ENT_F_CONN_COMPOSITE @@ @@ -MEDIA_ENT_T_CONN_TEST +MEDIA_ENT_F_CONN_TEST @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_SENSOR +MEDIA_ENT_F_CAM_SENSOR @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_FLASH +MEDIA_ENT_F_FLASH @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_LENS +MEDIA_ENT_F_LENS @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_DECODER +MEDIA_ENT_F_ATV_DECODER @@ @@ -MEDIA_ENT_T_V4L2_SUBDEV_TUNER +MEDIA_ENT_F_TUNER @@ @@ -MEDIA_ENT_T_DVB_DEMOD +MEDIA_ENT_F_DTV_DEMOD @@ @@ -MEDIA_ENT_T_DVB_DEMUX +MEDIA_ENT_F_TS_DEMUX @@ @@ -MEDIA_ENT_T_DVB_TSOUT +MEDIA_ENT_F_IO_DTV @@ @@ -MEDIA_ENT_T_DVB_CA +MEDIA_ENT_F_DTV_CA @@ @@ -MEDIA_ENT_T_DVB_NET_DECAP +MEDIA_ENT_F_DTV_NET_DECAP Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media-entity.h: rename entity.type to entity.functionMauro Carvalho Chehab
Entities should have one or more functions. Calling it as a type proofed to not be correct, as an entity could eventually have more than one type. So, rename the field as function. Please notice that this patch doesn't extend support for multiple function entities. Such change will happen when we have real case drivers using it. No functional changes. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] cx231xx: enforce check for graph creationMauro Carvalho Chehab
If the graph creation fails, don't register the device. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] tuner-core: add an input padMauro Carvalho Chehab
Tuners actually have at least one connector on its input. Add a PAD to connect it. Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-01-11[media] media: rename the function that create pad linksMauro Carvalho Chehab
With the new API, a link can be either between two PADs or between an interface and an entity. So, we need to use a better name for the function that create links between two pads. So, rename the such function to media_create_pad_link(). No functional changes. This patch was created via this shell script: for i in $(find drivers/media -name '*.[ch]' -type f) $(find drivers/staging/media -name '*.[ch]' -type f) $(find include/ -name '*.h' -type f) ; do sed s,media_entity_create_link,media_create_pad_link,g <$i >a && mv a $i; done Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-19[media] cx231xx_dvb: use demod_i2c for demod attachMatthias Schwarzott
Tested: * CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx * CX231XX_BOARD_HAUPPAUGE_930C_HD_1114xx Not Tested: * CX231XX_BOARD_HAUPPAUGE_EXETER * CX231XX_BOARD_HAUPPAUGE_955Q Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-11-17[media] include/media: move driver interface headers to a separate dirMauro Carvalho Chehab
Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2015-06-09[media] cx231xx: Add support for Terratec GrabbyTommi Rantala
Add support for the Terratec Grabby with USB ID 0ccd:00a6. Signed-off-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] cx231xx: fix compiler warningHans Verkuil
Fix this compiler warning by allocating a structure to read the eeprom instead of doing it on the stack and worse: the eeprom array is static, so that can cause problems if there are multiple cx231xx instances. cx231xx-cards.c: In function 'cx231xx_card_setup': cx231xx-cards.c:1110:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=] } ^ I did consider removing the code altogether since the result is actually not used at the moment, but I decided against it since it is used in other drivers and someone might want to start using it in this driver as well. And then it is useful that the code is already there. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-02[media] cx231xx: embed video_deviceHans Verkuil
Embed the video_device struct to simplify the error handling and in order to (eventually) get rid of video_device_alloc/release. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-03[media] cx231xx: Hauppauge HVR-955Q ATSC/QAM tunerOlli Salonen
Hauppauge HVR-955Q is a ATSC/QAM USB tuner with LGDT3306A demodulator and SiLabs Si2157-A30 tuner. Only digital TV has been tested (both ATSC and QAM256). Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-26[media] cx231xx: fix compilation if the media controller is not definedMauro Carvalho Chehab
drivers/media/usb/cx231xx/cx231xx-cards.c: In function ‘cx231xx_usb_probe’: drivers/media/usb/cx231xx/cx231xx-cards.c:1589:15: error: ‘struct v4l2_device’ has no member named ‘mdev’ dev->v4l2_dev.mdev = dev->media_dev; ^ drivers/media/usb/cx231xx/cx231xx-cards.c:1589:26: error: ‘struct cx231xx’ has no member named ‘media_dev’ dev->v4l2_dev.mdev = dev->media_dev; ^ scripts/Makefile.build:257: recipe for target 'drivers/media/usb/cx231xx/cx231xx-cards.o' failed Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-13[media] cx231xx: create media links for analog modeMauro Carvalho Chehab
Now that we have entities and pads, let's create media links between them, for analog setup. We may not have all the links for digital yet, as the dvb extention may not be loaded yet. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-13[media] cx231xx: add media controller supportMauro Carvalho Chehab
Let's add media controller support for this driver and register it for both V4L and DVB. The media controller on this driver is not mandatory, as it can fully work without it. So, if the media controller register fails, just print an error message, but proceed with device registering. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] cx231xx: don't use dev it not allocatedMauro Carvalho Chehab
changeset 5eeb3014827f added a fixup at the error check code. However, it introduced a new error: drivers/media/usb/cx231xx/cx231xx-cards.c:1586 cx231xx_usb_probe() error: we previously assumed 'dev' could be null (see line 1430) This happens when dev = kmalloc() fails. So, instead of relying on it to succeed, just change the parameter of clear_bit() from 'dev->devno' to 'nr'. Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-02-02[media] cx231xx: fix usbdev leak on failure paths in cx231xx_usb_probe()Alexey Khoroshilov
Commit b7085c086475 ("cx231xx: convert from pr_foo to dev_foo") moves usb_get_dev(interface_to_usbdev(interface)) to the beginning of cx231xx_usb_probe() to use udev->dev in dev_err(), but it does not make sure usbdev is put on all failure paths. Later dev_err(udev->dev) was replaced by dev_err(d). So the patch moves usb_get_dev() below (before the first use) and fixes another failure path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx231xx: Improve the log messageMauro Carvalho Chehab
Unfortunately, on devices that have multiple interfaces, udev->dev points to the parent device (usb) instead of the cx231xx specific one. Due to that the logs don't look too nice, as they'll print messages as if they were produced by USB core: usb-1-2: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 7 interfaces Instead of using the name of the parent device, let's use the name of the first cx231xx interface for all cx231xx sub-modules. With this path, the logs will be nicer: cx231xx 1-2:1.1: New device Conexant Corporation Polaris AV Capturb @ 480 Mbps (1554:5010) with 7 interfaces Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx231xx: use dev_foo instead of printkMauro Carvalho Chehab
There are several places at cx231xx that uses printk without any special reason. Change all of them to use dev_foo(). Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx231xx: convert from pr_foo to dev_fooMauro Carvalho Chehab
Replace all pr_foo occurrences by dev_foo, as this is the recommended way for drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx231xx: Cleanup printk at the driverMauro Carvalho Chehab
There are lots of debug printks printed with pr_info. Also, the printk's data are not too coherent: - there are duplicated driver name at the print format; - function name format string differs from function to function; - long strings broken into multiple lines; - some printks just produce ugly reports, being almost useless as-is. Do a cleanup on that. Still, there are much to be done in order to do a better printk job on this driver, but, at least it will now be a way less verbose, if debug printks are disabled, and some logs might actually be useful. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-11-03[media] cx231xx: get rid of driver-defined printk macrosMauro Carvalho Chehab
It currently does just like what pr_foo() macros do. So, replace them. A deeper cleanup is needed, as there are lots of debug macros printed with pr_info. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] cx231xx: drop unconditional port3 switchingMatthias Schwarzott
All switching should be done by i2c mux adapters. Drop explicit dont_use_port_3 flag. Drop info message about switch. Only the removed code in start_streaming is questionable: It did switch the port_3 flag without accessing i2c in between. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] cx231xx: change usage of I2C_1 to the real i2c portMatthias Schwarzott
change almost all instances of I2C_1 to I2C_1_MUX_3 Only these cases are changed to I2C_1_MUX_1: * All that have dont_use_port_3 set. * CX231XX_BOARD_HAUPPAUGE_EXETER, old code did explicitly not switch to port3. * eeprom access for 930C Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] cx231xx: add wrapper to get the i2c_adapter pointerMatthias Schwarzott
This is a preparation for mapping I2C_1_MUX_1 and I2C_1_MUX_3 later to the seperate muxed i2c adapters. Map mux adapters to I2C_1 for now. Add local variables for i2c_adapters in dvb_init to get line lengths shorter. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] cx231xx: Use symbolic constants for i2c ports instead of numbersMatthias Schwarzott
Replace numbers by the constants of same value and same meaning. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-10-30[media] cx231xx: use own i2c_client for eeprom accessMatthias Schwarzott
This is a preparation for deleting the otherwise useless i2c_clients that are allocated for all the i2c master adapters. Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] cx231xx: Add support for Hauppauge WinTV-HVR-901H (1114xx)Matthias Schwarzott
Add support for: [2040:b139] Hauppauge WinTV HVR-901H (1114xx) According to the inf file, the hardware is similar to [2040:b131] Hauppauge WinTV 930C-HD (model 1114xx) The only difference is the demod Si2161 instead of Si2165 (but both are supported by the si2165 driver). Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-23[media] cx231xx: Add support for Hauppauge WinTV-HVR-900H (111xxx)Matthias Schwarzott
Add support for: [2040:b138] Hauppauge WinTV HVR-900H (111xxx) The hardware is similar to [2040:b130] Hauppauge WinTV 930C-HD (model 1113xx) The only difference is the demod Si2161 instead of Si2165 (but both are supported by the si2165 driver). Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-07-27[media] cx231xx: handle errors at read_eeprom()Mauro Carvalho Chehab
Fix the following warnings: drivers/media/usb/cx231xx/cx231xx-cards.c: In function 'read_eeprom': drivers/media/usb/cx231xx/cx231xx-cards.c:979:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-07-27[media] cx231xx: Add support for PCTV QuatroStick 522eMatthias Schwarzott
Add support for: [2013:025e] PCTV QuatroStick 522e The hardware is identical to Hauppauge WinTV 930C-HD (model 1114xx) Signed-off-by: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
generated by cgit (git 2.34.1) at 2024-06-08 01:08:09 +0000