| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Introduction of iommu-pages infrastructure to consolitate
page-table allocation code among hardware drivers. This is
ground-work for more generalization in the future
- Remove IOMMU_DEV_FEAT_SVA and IOMMU_DEV_FEAT_IOPF feature flags
- Convert virtio-iommu to domain_alloc_paging()
- KConfig cleanups
- Some small fixes for possible overflows and race conditions
Intel VT-d driver:
- Restore WO permissions on second-level paging entries
- Use ida to manage domain id
- Miscellaneous cleanups
AMD-Vi:
- Make sure notifiers finish running before module unload
- Add support for HTRangeIgnore feature
- Allow matching ACPI HID devices without matching UIDs
ARM-SMMU:
- SMMUv2:
- Recognise the compatible string for SAR2130P MDSS in the
Qualcomm driver, as this device requires an identity domain
- Fix Adreno stall handling so that GPU debugging is more robust
and doesn't e.g. result in deadlock
- SMMUv3:
- Fix ->attach_dev() error reporting for unrecognised domains
- IO-pgtable:
- Allow clients (notably, drivers that process requests from
userspace) to silence warnings when mapping an already-mapped
IOVA
S390:
- Add support for additional table regions
Mediatek:
- Add support for MT6893 MM IOMMU
And some smaller fixes and improvements in various other drivers"
* tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (75 commits)
iommu/vt-d: Restore context entry setup order for aliased devices
iommu/mediatek: Fix compatible typo for mediatek,mt6893-iommu-mm
iommu/arm-smmu-qcom: Make set_stall work when the device is on
iommu/arm-smmu: Move handing of RESUME to the context fault handler
iommu/arm-smmu-qcom: Enable threaded IRQ for Adreno SMMUv2/MMU500
iommu/io-pgtable-arm: Add quirk to quiet WARN_ON()
iommu: Clear the freelist after iommu_put_pages_list()
iommu/vt-d: Change dmar_ats_supported() to return boolean
iommu/vt-d: Eliminate pci_physfn() in dmar_find_matched_satc_unit()
iommu/vt-d: Replace spin_lock with mutex to protect domain ida
iommu/vt-d: Use ida to manage domain id
iommu/vt-d: Restore WO permissions on second-level paging entries
iommu/amd: Allow matching ACPI HID devices without matching UIDs
iommu: make inclusion of arm/arm-smmu-v3 directory conditional
iommu: make inclusion of riscv directory conditional
iommu: make inclusion of amd directory conditional
iommu: make inclusion of intel directory conditional
iommu: remove duplicate selection of DMAR_TABLE
iommu/fsl_pamu: remove trailing space after \n
iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Update overflow helpers to ease refactoring of on-stack flex array
instances (Gustavo A. R. Silva, Kees Cook)
- lkdtm: Use SLAB_NO_MERGE instead of constructors (Harry Yoo)
- Simplify CONFIG_CC_HAS_COUNTED_BY (Jan Hendrik Farr)
- Disable u64 usercopy KUnit test on 32-bit SPARC (Thomas Weißschuh)
- Add missed designated initializers now exposed by fixed randstruct
(Nathan Chancellor, Kees Cook)
- Document compilers versions for __builtin_dynamic_object_size
- Remove ARM_SSP_PER_TASK GCC plugin
- Fix GCC plugin randstruct, add selftests, and restore COMPILE_TEST
builds
- Kbuild: induce full rebuilds when dependencies change with GCC
plugins, the Clang sanitizer .scl file, or the randstruct seed.
- Kbuild: Switch from -Wvla to -Wvla-larger-than=1
- Correct several __nonstring uses for -Wunterminated-string-initialization
* tag 'hardening-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
Revert "hardening: Disable GCC randstruct for COMPILE_TEST"
lib/tests: randstruct: Add deep function pointer layout test
lib/tests: Add randstruct KUnit test
randstruct: gcc-plugin: Remove bogus void member
net: qede: Initialize qede_ll_ops with designated initializer
scsi: qedf: Use designated initializer for struct qed_fcoe_cb_ops
md/bcache: Mark __nonstring look-up table
integer-wrap: Force full rebuild when .scl file changes
randstruct: Force full rebuild when seed changes
gcc-plugins: Force full rebuild when plugins change
kbuild: Switch from -Wvla to -Wvla-larger-than=1
hardening: simplify CONFIG_CC_HAS_COUNTED_BY
overflow: Fix direct struct member initialization in _DEFINE_FLEX()
kunit/overflow: Add tests for STACK_FLEX_ARRAY_SIZE() helper
overflow: Add STACK_FLEX_ARRAY_SIZE() helper
input/joystick: magellan: Mark __nonstring look-up table const
watchdog: exar: Shorten identity name to fit correctly
mod_devicetable: Enlarge the maximum platform_device_id name length
overflow: Clarify expectations for getting DEFINE_FLEX variable sizes
compiler_types: Identify compiler versions for __builtin_dynamic_object_size
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Thomas Gleixner:
"A set of cleanups for the generic interrupt subsystem:
- Consolidate on one set of functions for the interrupt domain code
to get rid of pointlessly duplicated code with only marginal
different semantics.
- Update the documentation accordingly and consolidate the coding
style of the irqdomain header"
* tag 'irq-cleanups-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqdomain: Consolidate coding style
irqdomain: Fix kernel-doc and add it to Documentation
Documentation: irqdomain: Update it
Documentation: irq-domain.rst: Simple improvements
Documentation: irq/concepts: Minor improvements
Documentation: irq/concepts: Add commas and reflow
irqdomain: Improve kernel-docs of functions
irqdomain: Make struct irq_domain_info variables const
irqdomain: Use irq_domain_instantiate()'s return value as initializers
irqdomain: Drop irq_linear_revmap()
pinctrl: keembay: Switch to irq_find_mapping()
irqchip/armada-370-xp: Switch to irq_find_mapping()
gpu: ipu-v3: Switch to irq_find_mapping()
gpio: idt3243x: Switch to irq_find_mapping()
sh: Switch to irq_find_mapping()
powerpc: Switch to irq_find_mapping()
irqdomain: Drop irq_domain_add_*() functions
powerpc: Switch irq_domain_add_nomap() to use fwnode
thermal: Switch to irq_domain_create_linear()
soc: Switch to irq_domain_create_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.16
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)
Misc changes:
- core: add support for Write Disable-aware SPD
|
|
'arm/smmu/bindings', 'fsl/pamu', 'mediatek', 'renesas/ipmmu', 's390', 'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
Some I2C ATRs do not support dynamic remapping, only static mapping
of direct children.
Mappings will only be added or removed as a result of devices being
added or removed from a child bus.
The ATR pool will have to be big enough to accommodate all devices
expected to be added to the child buses.
Add a new flag that prevents old mappings to be replaced or new mappings
to be created in the alias finding code paths. That mens adding a flags
parameter to i2c_atr_new() and an i2c_atr_flags enum.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
irq_domain_add_simple() is going away as being obsolete now. Switch to
the preferred irq_domain_create_simple(). That differs in the first
parameter: It takes more generic struct fwnode_handle instead of struct
device_node. Therefore, of_fwnode_handle() is added around the
parameter.
Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).
[ tglx: Fix up subject prefix ]
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250319092951.37667-27-jirislaby@kernel.org
|
|
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
|
|
Use SLAB_NO_MERGE flag to prevent merging instead of providing an
empty constructor. Using an empty constructor in this manner is an abuse
of slab interface.
The SLAB_NO_MERGE flag should be used with caution, but in this case,
it is acceptable as the cache is intended soley for debugging purposes.
No functional changes intended.
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://lore.kernel.org/r/20250318014533.1624852-1-harry.yoo@oracle.com
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
None of the drivers implement anything for IOMMU_DEV_FEAT_IOPF anymore,
remove it to avoid dead code.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250418080130.1844424-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
None of the drivers implement anything here anymore, remove the dead code.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Link: https://lore.kernel.org/r/20250418080130.1844424-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
|
|
Commit a402006d48a9 ("misc: pci_endpoint_test: Remove global 'irq_type'
and 'no_msi'") changed so that the default IRQ vector requested by
pci_endpoint_test_probe() was no longer the module param 'irq_type', but
instead test->irq_type. test->irq_type is by default IRQ_TYPE_UNDEFINED
(until someone calls ioctl(PCITEST_SET_IRQTYPE)).
However, the commit also changed so that after initializing test->irq_type
to IRQ_TYPE_UNDEFINED, it also overrides it with driver_data->irq_type, if
the PCI device and vendor ID provides driver_data.
This causes a regression for PCI device and vendor IDs that do not provide
driver_data, and the host side pci_endpoint_test_driver driver failed to
probe on such platforms:
pci-endpoint-test 0001:01:00.0: Invalid IRQ type selected
pci-endpoint-test 0001:01:00.0: probe with driver pci-endpoint-test failed with error -22
Considering that the pci endpoint selftests and the old pcitest.sh always
call ioctl(PCITEST_SET_IRQTYPE) before performing any test that requires
IRQs, fix the regression by removing the allocation of IRQs in
pci_endpoint_test_probe(). The IRQ allocation will occur when
ioctl(PCITEST_SET_IRQTYPE) is called.
A positive side effect of this is that even if the endpoint controller has
issues with IRQs, the user can do still do all the tests/ioctls() that do
not require working IRQs, e.g. PCITEST_BAR and PCITEST_BARS.
This also means that we can remove the now unused irq_type from
driver_data. The irq_type will always be the one configured by the user
using ioctl(PCITEST_SET_IRQTYPE). (A user that does not know, or care
which irq_type that is used, can use PCITEST_IRQ_TYPE_AUTO. This has
superseded the need for a default irq_type in driver_data.)
[bhelgaas: add probe failure details]
Fixes: a402006d48a9c ("misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250416142825.336554-2-cassel@kernel.org
|
|
The TI FPC202 dual port controller serves as a low-speed signal aggregator
for common port types such as SFP, QSFP, Mini-SAS HD, and others.
It aggregates GPIO and I2C signals across two downstream ports, acting as
both a GPIO controller and an I2C address translator for up to two logical
devices per port.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
vsc_tp.tx_buf and vsc_tp.rx_buf point to a struct vsc_tp_packet, use
the correct type instead of "void *" and use sizeof(*ptr) when allocating
memory for these buffers.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-3-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
gcc 15 honors the __counted_by(len) attribute on vsc_tp_packet.buf[]
and the vsc-tp.c code is using this in a wrong way. len does not contain
the available size in the buffer, it contains the actual packet length
*without* the crc. So as soon as vsc_tp_xfer() tries to add the crc to
buf[] the fortify-panic handler gets triggered:
[ 80.842193] memcpy: detected buffer overflow: 4 byte write of buffer size 0
[ 80.842243] WARNING: CPU: 4 PID: 272 at lib/string_helpers.c:1032 __fortify_report+0x45/0x50
...
[ 80.843175] __fortify_panic+0x9/0xb
[ 80.843186] vsc_tp_xfer.cold+0x67/0x67 [mei_vsc_hw]
[ 80.843210] ? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
[ 80.843229] ? lockdep_hardirqs_on+0x7c/0x110
[ 80.843250] mei_vsc_hw_start+0x98/0x120 [mei_vsc]
[ 80.843270] mei_reset+0x11d/0x420 [mei]
The easiest fix would be to just drop the counted-by but with the exception
of the ack buffer in vsc_tp_xfer_helper() which only contains enough room
for the packet-header, all other uses of vsc_tp_packet always use a buffer
of VSC_TP_MAX_XFER_SIZE bytes for the packet.
Instead of just dropping the counted-by, split the vsc_tp_packet struct
definition into a header and a full-packet definition and use a fixed
size buf[] in the packet definition, this way fortify-source buffer
overrun checking still works when enabled.
Fixes: 566f5ca97680 ("mei: Add transport driver for IVSC device")
Cc: stable@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250318141203.94342-2-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Under irq_ack, pci1xxxx_assign_bit reads the current interrupt status,
modifies and writes the entire value back. Since, the IRQ status bit
gets cleared on writing back, the better approach is to directly write
the bitmask to the register in order to preserve the value.
Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-3-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Resolve kernel panic while accessing IRQ handler associated with the
generated IRQ. This is done by acquiring the spinlock and storing the
current interrupt state before handling the interrupt request using
generic_handle_irq.
A previous fix patch was submitted where 'generic_handle_irq' was
replaced with 'handle_nested_irq'. However, this change also causes
the kernel panic where after determining which GPIO triggered the
interrupt and attempting to call handle_nested_irq with the mapped
IRQ number, leads to a failure in locating the registered handler.
Fixes: 194f9f94a516 ("misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handling")
Cc: stable <stable@kernel.org>
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20250313170856.20868-2-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add Panther Lake H device id.
Cc: stable <stable@kernel.org>
Co-developed-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Tomas Winkler <tomasw@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20250408130005.1358140-1-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Remove the IBM CAPI (cxl) driver
Thanks to Andrew Donnellan.
* tag 'powerpc-6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs: Fix references to IBM CAPI (cxl) removal version
cxl: Remove driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"These are objtool fixes and updates by Josh Poimboeuf, centered around
the fallout from the new CONFIG_OBJTOOL_WERROR=y feature, which,
despite its default-off nature, increased the profile/impact of
objtool warnings:
- Improve error handling and the presentation of warnings/errors
- Revert the new summary warning line that some test-bot tools
interpreted as new regressions
- Fix a number of objtool warnings in various drivers, core kernel
code and architecture code. About half of them are potential
problems related to out-of-bounds accesses or potential undefined
behavior, the other half are additional objtool annotations
- Update objtool to latest (known) compiler quirks and objtool bugs
triggered by compiler code generation
- Misc fixes"
* tag 'objtool-urgent-2025-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
objtool/loongarch: Add unwind hints in prepare_frametrace()
rcu-tasks: Always inline rcu_irq_work_resched()
context_tracking: Always inline ct_{nmi,irq}_{enter,exit}()
sched/smt: Always inline sched_smt_active()
objtool: Fix verbose disassembly if CROSS_COMPILE isn't set
objtool: Change "warning:" to "error: " for fatal errors
objtool: Always fail on fatal errors
Revert "objtool: Increase per-function WARN_FUNC() rate limit"
objtool: Append "()" to function name in "unexpected end of section" warning
objtool: Ignore end-of-section jumps for KCOV/GCOV
objtool: Silence more KCOV warnings, part 2
objtool, drm/vmwgfx: Don't ignore vmw_send_msg() for ORC
objtool: Fix STACK_FRAME_NON_STANDARD for cold subfunctions
objtool: Fix segfault in ignore_unreachable_insn()
objtool: Fix NULL printf() '%s' argument in builtin-check.c:save_argv()
objtool, lkdtm: Obfuscate the do_nothing() pointer
objtool, regulator: rk808: Remove potential undefined behavior in rk806_set_mode_dcdc()
objtool, ASoC: codecs: wcd934x: Remove potential undefined behavior in wcd934x_slim_irq_handler()
objtool, Input: cyapa - Remove undefined behavior in cyapa_update_fw_store()
objtool, panic: Disable SMAP in __stack_chk_fail()
...
|
|
This merges in the removal of the IBM CAPI "cxl" driver.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c-core updates (collected by Wolfram):
- remove last user and unexport i2c_of_match_device()
- irq usage cleanup from Jiri
i2c-host updates (collected by Andi):
Refactoring and cleanups:
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements:
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features:
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support:
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
- designware: add support for Renesas RZ/N1D
Multiplexers:
- ltc4306, reg: fix assignment in platform_driver structure
at24 eeprom updates (collected by Bartosz):
- add two new compatible entries to the DT binding document
- drop of_match_ptr() and ACPI_PTR() macros"
* tag 'i2c-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (50 commits)
dt-bindings: i2c: snps,designware-i2c: describe Renesas RZ/N1D variant
irqdomain: i2c: Switch to irq_find_mapping()
i2c: iproc: Refactor prototype and remove redundant error checks
i2c: qcom-geni: Update i2c frequency table to match hardware guidance
i2c: mlxbf: Use readl_poll_timeout_atomic() for polling
i2c: pasemi: Add registers bits and switch to BIT()
i2c: k1: Initialize variable before use
i2c: spacemit: add support for SpacemiT K1 SoC
dt-bindings: i2c: spacemit: add support for K1 SoC
i2c: omap: Add support for setting mux
dt-bindings: i2c: omap: Add mux-states property
i2c: octeon: remove 10-bit addressing support
i2c: octeon: fix return commenting
i2c: i801: Use MMIO if available
i2c: i801: Switch to iomapped register access
i2c: i801: Improve too small kill wait time in i801_check_post
i2c: i801: Move i801_wait_intr and i801_wait_byte_done in the code
i2c: i801: Cosmetic improvements
i2c: cadence: Move reset_control_assert after pm_runtime_set_suspended in probe error path
i2c: cadence: Simplify using devm_clk_get_enabled()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO driver updates from Greg KH:
"Here is the big set of char, misc, iio, and other smaller driver
subsystems for 6.15-rc1. Lots of stuff in here, including:
- loads of IIO changes and driver updates
- counter driver updates
- w1 driver updates
- faux conversions for some drivers that were abusing the platform
bus interface
- coresight driver updates
- rust miscdevice binding updates based on real-world-use
- other minor driver updates
All of these have been in linux-next with no reported issues for quite
a while"
* tag 'char-misc-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
samples: rust_misc_device: fix markup in top-level docs
Coresight: Fix a NULL vs IS_ERR() bug in probe
misc: lis3lv02d: convert to use faux_device
tlclk: convert to use faux_device
regulator: dummy: convert to use the faux device interface
bus: mhi: host: Fix race between unprepare and queue_buf
coresight: configfs: Constify struct config_item_type
doc: iio: ad7380: describe offload support
iio: ad7380: add support for SPI offload
iio: light: Add check for array bounds in veml6075_read_int_time_ms
iio: adc: ti-ads7924 Drop unnecessary function parameters
staging: iio: ad9834: Use devm_regulator_get_enable()
staging: iio: ad9832: Use devm_regulator_get_enable()
iio: gyro: bmg160_spi: add of_match_table
dt-bindings: iio: adc: Add i.MX94 and i.MX95 support
iio: adc: ad7768-1: remove unnecessary locking
Documentation: ABI: add wideband filter type to sysfs-bus-iio
iio: adc: ad7768-1: set MOSI idle state to prevent accidental reset
iio: adc: ad7768-1: Fix conversion result sign
iio: adc: ad7124: Benefit of dev = indio_dev->dev.parent in ad7124_parse_channel_config()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
|
|
If execute_location()'s memcpy of do_nothing() gets inlined and unrolled
by the compiler, it copies one word at a time:
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x1374
mov %rax,0x38(%rbx)
mov 0x0(%rip),%rax R_X86_64_PC32 .text+0x136c
mov %rax,0x30(%rbx)
...
Those .text references point to the middle of the function, causing
objtool to complain about their lack of ENDBR.
Prevent that by resolving the function pointer at runtime rather than
build time. This fixes the following warning:
drivers/misc/lkdtm/lkdtm.o: warning: objtool: execute_location+0x23: relocation to !ENDBR: .text+0x1378
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/30b9abffbddeb43c4f6320b1270fa9b4d74c54ed.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503191453.uFfxQy5R-lkp@intel.com/
|
|
- Move struct dwc_pcie_vsec_id to include/linux/pcie-dwc.h, where it can be
shared by debugfs, perf, sysfs, etc (Manivannan Sadhasivam)
- Add dw_pcie_find_vsec_capability() to locate Vendor Specific Extended
Capabilities (Shradha Todi)
- Add debugfs-based Silicon Debug, Error Injection, Statistical Counter
support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans Zhang)
- Add Rockchip Vendor ID and Vendor Specific ID of RAS DES Capability so
the DWC debugfs features work for Rockchip as well (Niklas Cassel)
* pci/controller/dwc:
PCI: dw-rockchip: Hide broken ATS capability for RK3588 running in EP mode
PCI: dwc: ep: Add dw_pcie_ep_hide_ext_capability()
PCI: dwc: ep: Return -ENOMEM for allocation failures
PCI: dwc: Add Rockchip to the RAS DES allowed vendor list
PCI: Add Rockchip Vendor ID
PCI: dwc: Add debugfs property to provide LTSSM status of the PCIe link
PCI: dwc: Add debugfs based Statistical Counter support for DWC
PCI: dwc: Add debugfs based Error Injection support for DWC
PCI: dwc: Add debugfs based Silicon Debug support for DWC
PCI: dwc: Add helper to find the Vendor Specific Extended Capability (VSEC)
perf/dwc_pcie: Move common DWC struct definitions to 'pcie-dwc.h'
|
|
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
i2c-host updates for v6.15
Refactoring and cleanups
- octeon, cadence, i801, pasemi, mlxbf, bcm-iproc: general
refactorings
- octeon: remove 10-bit address support
Improvements
- amd-asf: improved error handling
- designware: use guard(mutex)
- amd-asf, designware: update naming to follow latest specs
- cadence: fix cleanup path in probe
- i801: use MMIO and I/O mapping helpers to access registers
- pxa: handle error after clk_prepare_enable
New features
- added i2c_10bit_addr_*_from_msg() and updated multiple drivers
- omap: added multiplexer state handling
- qcom-geni: update frequency configuration
- qup: introduce DMA usage policy
New hardware support
- exynos: add support for Samsung exynos7870
- k1: add support for spacemit k1 (new driver)
- imx: add support for i.mx94 lpi2c
- rk3x: add support for rk3562
Multiplexers
- ltc4306, reg: fix assignment in platform_driver structure
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove the cxl driver that provides support for the IBM Coherent
Accelerator Processor Interface. Revert or clean up associated code in
arch/powerpc that is no longer necessary.
cxl has received minimal maintenance for several years, and is not
supported on the Power10 processor. We aren't aware of any users who are
likely to be using recent kernels.
Thanks to Mikey Neuling, Ian Munsie, Daniel Axtens, Frederic Barrat,
Christophe Lombard, Philippe Bergheaud, Vaibhav Jain and Alastair
D'Silva for their work on this driver over the years.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20250219070007.177725-2-ajd@linux.ibm.com
|
|
Use the IRQ_TYPE_* defines from the UAPI header rather than duplicating
these defines in the driver itself.
No functional change.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-11-cassel@kernel.org
|
|
The pci_endpoint_test_request_irq() and pci_endpoint_test_release_irq()
are called repeatedly by the users through pci_endpoint_test_set_irq().
So using the managed version of IRQ functions within these functions
has no effect.
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225110252.28866-7-hayashi.kunihiko@socionext.com
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The global variable "irq_type" preserves the current value of
ioctl(GET_IRQTYPE).
However, all tests that use interrupts first call ioctl(SET_IRQTYPE)
to set "test->irq_type", then write the value of test->irq_type into
the register pointed by test_reg_bar, and request the interrupt to the
endpoint. The endpoint function driver, pci-epf-test, refers to the
register, and determine which type of interrupt to raise.
The global variable "irq_type" is never used in the actual test,
so remove the variable and replace it with "test->irq_type".
Also, for the same reason, the variable "no_msi" can be removed.
Initially, "test->irq_type" has IRQ_TYPE_UNDEFINED, and the
ioctl(GET_IRQTYPE) before calling ioctl(SET_IRQTYPE) will return
an error.
Suggested-by: Niklas Cassel <cassel@kernel.org>
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225110252.28866-6-hayashi.kunihiko@socionext.com
|
|
There are two variables that indicate the interrupt type to be used
in the next test execution, "irq_type" as global and "test->irq_type".
The global is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
The type set in this function isn't reflected in the global "irq_type",
so ioctl(PCITEST_GET_IRQTYPE) returns the previous type.
As a result, the wrong type is displayed in old version of "pcitest"
as follows:
- Result of running "pcitest -i 0"
SET IRQ TYPE TO LEGACY: OKAY
- Result of running "pcitest -I"
GET IRQ TYPE: MSI
Whereas running the new version of "pcitest" in kselftest results in an
error as follows:
# RUN pci_ep_basic.LEGACY_IRQ_TEST ...
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Expected 0 (0) == ret (1)
# pci_endpoint_test.c:104:LEGACY_IRQ_TEST:Can't get Legacy IRQ type
Fix this issue by propagating the current type to the global "irq_type".
Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225110252.28866-5-hayashi.kunihiko@socionext.com
|
|
The lis3lv02d driver does not need to create a platform device, it only
did so because it was simple to do that in order to get a place in sysfs
to hang some device-specific attributes. Change it over to use the faux
device instead as this is NOT a real platform device, and it makes the
code even smaller than before.
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/2025021028-shortcake-stained-b0a8@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes in here as well to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two variables that indicate the interrupt type to be used
in the next test execution, global "irq_type" and "test->irq_type".
The former is referenced from pci_endpoint_test_get_irq() to preserve
the current type for ioctl(PCITEST_GET_IRQTYPE).
In the pci_endpoint_test_request_irq(), since this global variable
is referenced when an error occurs, the unintended error message is
displayed.
For example, after running "pcitest -i 2", the following message
shows "MSI 3" even if the current IRQ type becomes "MSI-X":
pci-endpoint-test 0000:01:00.0: Failed to request IRQ 30 for MSI 3
SET IRQ TYPE TO MSI-X: NOT OKAY
Fix this issue by using "test->irq_type" instead of global "irq_type".
Cc: stable@vger.kernel.org
Fixes: b2ba9225e031 ("misc: pci_endpoint_test: Avoid using module parameter to determine irqtype")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-4-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
request_irq error
After devm_request_irq() fails with error in pci_endpoint_test_request_irq(),
the pci_endpoint_test_free_irq_vectors() is called assuming that all IRQs
have been released.
However, some requested IRQs remain unreleased, so there are still
/proc/irq/* entries remaining, and this results in WARN() with the
following message:
remove_proc_entry: removing non-empty directory 'irq/30', leaking at least 'pci-endpoint-test.0'
WARNING: CPU: 0 PID: 202 at fs/proc/generic.c:719 remove_proc_entry +0x190/0x19c
To solve this issue, set the number of remaining IRQs to test->num_irqs,
and release IRQs in advance by calling pci_endpoint_test_release_irq().
Cc: stable@vger.kernel.org
Fixes: e03327122e2c ("pci_endpoint_test: Add 2 ioctl commands")
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-3-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Running 'pcitest -b 0' fails with "TEST FAILED" when the BAR0 size
is e.g. 8 GB.
The return value of the pci_resource_len() macro can be larger than that
of a signed integer type. Thus, when using 'pcitest' with an 8 GB BAR,
the bar_size of the integer type will overflow.
Change bar_size from integer to resource_size_t to prevent integer
overflow for large BAR sizes with 32-bit compilers.
In order to handle 64-bit resource_type_t on 32-bit platforms, we would
have needed to use a function like div_u64() or similar. Instead, change
the code to use addition instead of division. This avoids the need for
div_u64() or similar, while also simplifying the code.
Fixes: cda370ec6d1f ("misc: pci_endpoint_test: Avoid using hard-coded BAR sizes")
Co-developed-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Hans Zhang <18255117159@163.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250124093300.3629624-2-cassel@kernel.org
[mani: added fixes tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
The current code returns -ENOMEM if test->bar[barno] is NULL.
There can be two reasons why test->bar[barno] is NULL:
1) The pci_ioremap_bar() call in pci_endpoint_test_probe() failed.
2) The BAR was skipped, because it is disabled by the endpoint.
Many PCI endpoint controller drivers will disable all BARs in their
init function. A disabled BAR will have a size of 0.
A PCI endpoint function driver will be able to enable any BAR that
is not marked as BAR_RESERVED (which means that the BAR should not
be touched by the EPF driver).
Thus, perform check if the size is 0, before checking if
test->bar[barno] is NULL, such that we can return different errors.
This will allow the selftests to return SKIP instead of FAIL for
disabled BARs.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250123120147.3603409-3-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Increase the size of the string buffer to avoid potential truncation in
pci_endpoint_test_probe().
This fixes the following build warning when compiling with W=1:
drivers/misc/pci_endpoint_test.c:29:49: note: directive argument in the range [0, 2147483647]
29 | #define DRV_MODULE_NAME "pci-endpoint-test"
| ^~~~~~~~~~~~~~~~~~~
drivers/misc/pci_endpoint_test.c:998:38: note: in expansion of macro ‘DRV_MODULE_NAME’
998 | snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
| ^~~~~~~~~~~~~~~
drivers/misc/pci_endpoint_test.c:998:9: note: ‘snprintf’ output between 20 and 29 bytes into a destination of size 24
998 | snprintf(name, sizeof(name), DRV_MODULE_NAME ".%d", id);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250123103127.3581432-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Commit f26d37ee9bda ("misc: pci_endpoint_test: Fix IOCTL return value")
changed the return value of pci_endpoint_test_bars_read_bar() from false
to -EINVAL on error, however, it failed to update the error handling.
Fixes: f26d37ee9bda ("misc: pci_endpoint_test: Fix IOCTL return value")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250204110640.570823-2-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
Move PCI_VENDOR_ID_ROCKCHIP from pci_endpoint_test.c to pci_ids.h and
reuse it in pcie-rockchip-host.c.
Link: https://lore.kernel.org/r/20250218092120.2322784-2-cassel@kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
|
|
These result in a very small reduction in driver size, but at the cost
of more complex build and slightly harder to read code. In the case of
of_match_ptr() it also prevents use of PRP0001 ACPI based identification.
In this particular case we have a valid ACPI/PNP ID that should be used
in preference to PRP0001 but doesn't mean we should prevent that route.
With this done, drop unneeded of*.h inclusions and __maybe_unused markers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250225100838.362125-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This reverts commit 235b630eda072d7e7b102ab346d6b8a2c028a772.
This commit was found responsible for issues with SD card recognition,
as users had to re-insert their cards in the readers and wait for a
while. As for some people the SD card was involved in the boot process
it also caused boot failures.
Cc: stable@vger.kernel.org
Link: https://bbs.archlinux.org/viewtopic.php?id=303321
Fixes: 235b630eda07 ("drivers/card_reader/rtsx_usb: Restore interrupt based detection")
Reported-by: qf <quintafeira@tutanota.com>
Closes: https://lore.kernel.org/all/1de87dfa-1e81-45b7-8dcb-ad86c21d5352@heusel.eu
Signed-off-by: Christian Heusel <christian@heusel.eu>
Link: https://lore.kernel.org/r/20250224-revert-sdcard-patch-v1-1-d1a457fbb796@heusel.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The x86 CPU selection menu is confusing for a number of reasons:
When configuring 32-bit kernels, it shows a small number of early 64-bit
microarchitectures (K8, Core 2) but not the regular generic 64-bit target
that is the normal default. There is no longer a reason to run 32-bit
kernels on production 64-bit systems, so only actual 32-bit CPUs need
to be shown here.
When configuring 64-bit kernels, the options also pointless as there is
no way to pick any CPU from the past 15 years, leaving GENERIC_CPU as
the only sensible choice.
Address both of the above by removing the obsolete options and making
all 64-bit kernels run on both Intel and AMD CPUs from any generation.
Testing generic 32-bit kernels on 64-bit hardware remains possible,
just not building a 32-bit kernel that requires a 64-bit CPU.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250226213714.4040853-5-arnd@kernel.org
|
