summaryrefslogtreecommitdiff
path: root/drivers/mmc/core
AgeCommit message (Expand)Author
2015-10-27mmc: pwrseq: Use highest priority for eMMC restart handlerJavier Martinez Canillas
2015-10-27mmc: mmc: extend the mmc_send_tuning()Chaotian Jing
2015-10-27mmc: core: Add DT bindings for eMMC hardware reset supportChaotian Jing
2015-10-26mmc: skip reclaiming host on mmc_add_card() errorSergei Shtylyov
2015-10-26mmc: core: Add mmc_regulator_set_vqmmc()Douglas Anderson
2015-10-26mmc: core: move ocr-bit to voltage translation into separate functionHeiko Stuebner
2015-10-26mmc: core: Remove MMC_CLKGATEUlf Hansson
2015-10-26mmc: core: enable CMD19 tuning for DDR50 modeWeijun Yang
2015-10-26mmc: debugfs: implement ios show for SDR12 and SDR25Shawn Lin
2015-10-26mmc: Wait for card_busy before starting sdio requestsHans de Goede
2015-10-26mmc: Add mmc_is_io_op helper functionHans de Goede
2015-10-26mmc: pwrseq_simple: use GPIO descriptors array APIJavier Martinez Canillas
2015-10-26mmc: debugfs: implement ios show for driver typeShawn Lin
2015-10-26mmc: pwrseq: use gpiod_get() instead of index 0Javier Martinez Canillas
2015-10-26mmc: core: Convert __mmc_switch() into an internal core functionUlf Hansson
2015-10-26mmc: sd: Remove superfluous error code assignmentYousong Zhou
2015-10-26mmc: core: Keep host claimed while invoking mmc_power_off|up()Ulf Hansson
2015-10-21mmc: core: Fix init_card in 52MhzChaotian Jing
2015-09-30mmc: core: fix dead loop of mmc_retuneChaotian Jing
2015-09-29mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unsetUlf Hansson
2015-08-31mmc: core: fix race condition in mmc_wait_data_doneJialing Fu
2015-08-27mmc: block: skip trim for some kingston eMMCsShawn Lin
2015-08-27mmc: host: use of_property_read_bool()Sergei Shtylyov
2015-08-27mmc: core: Fixed bug in one erase-group budget TRIMRobin van der Gracht
2015-08-17mmc: core: Optimize case for exactly one erase-group budgetDavid Jander
2015-06-04mmc: core: Attach PM domain prior probing of SDIO func driverUlf Hansson
2015-06-04mmc: core: Remove redundant ->power_restore() callback for SDUlf Hansson
2015-06-04mmc: core: Remove redundant ->power_restore() callback for MMCUlf Hansson
2015-06-01mmc: mmc: Add driver strength selectionAdrian Hunter
2015-06-01mmc: mmc: Read card's valid driver strength maskAdrian Hunter
2015-06-01mmc: core: Record card drive strengthAdrian Hunter
2015-06-01mmc: core: Factor out common code in drive strength selectionAdrian Hunter
2015-06-01mmc: core: Add 'card' to drive strength selection callbackAdrian Hunter
2015-06-01mmc: core: Simplify card drive strength maskAdrian Hunter
2015-06-01mmc: core: Allow card drive strength to be different to hostAdrian Hunter
2015-06-01mmc: core: Reset driver type to defaultAdrian Hunter
2015-06-01mmc: core: Increase delay for voltage to stabilize from 3.3V to 1.8VDoug Anderson
2015-06-01mmc: cast u8 to unsigned long long to avoid unexpected errorKuninori Morimoto
2015-06-01mmc: dt: Allow to specify that no write protect signal is presentLars-Peter Clausen
2015-06-01mmc: Add support for disabling write-protect detectionLars-Peter Clausen
2015-06-01mmc: core: Don't print reset warning if reset is not supportedAdrian Hunter
2015-06-01mmc: core: Flag re-tuning is needed on CRC errorsAdrian Hunter
2015-06-01mmc: core: Add support for HS400 re-tuningAdrian Hunter
2015-06-01mmc: core: Separate out the mmc_switch status check so it can be re-usedAdrian Hunter
2015-06-01mmc: mmc: Hold re-tuning in mmc_sleep()Adrian Hunter
2015-06-01mmc: core: Hold re-tuning while bkops ongoingAdrian Hunter
2015-06-01mmc: core: Hold re-tuning during erase commandsAdrian Hunter
2015-06-01mmc: core: Hold re-tuning during switch commandsAdrian Hunter
2015-06-01mmc: core: Add support for re-tuning before each requestAdrian Hunter
2015-06-01mmc: core: Enable / disable re-tuningAdrian Hunter
generated by cgit (git 2.34.1) at 2025-05-31 04:08:10 +0000