summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/renesas_sdhi_internal_dmac.c
AgeCommit message (Collapse)Author
2024-10-14mmc: Switch back to struct platform_driver::remove()Uwe Kleine-König
After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/mmc to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://lore.kernel.org/r/20240927145832.754697-2-u.kleine-koenig@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-08-26mmc: renesas_sdhi: Add RZ/V2H(P) compatible stringLad Prabhakar
The SD/MMC block on the RZ/V2H(P) ("R9A09G057") SoC is similar to that of the R-Car Gen3, but it has some differences: - HS400 is not supported. - It has additional SD_STATUS register to control voltage, power enable and reset. - It supports fixed address mode. To accommodate these differences, a SoC-specific 'renesas,sdhi-r9a09g057' compatible string is added. Note for RZ/V2H(P), we are using the `of_rzg2l_compatible` OF data as it already handles no HS400 and fixed address mode support. Since the SDxIOVS and SDxPWEN pins can always be used as GPIO pins on the RZ/V2H(P) SoC, no driver changes are done to control the SD_STATUS register. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20240724182119.652080-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-07-17Merge tag 'mfd-next-6.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers: - ROHM BD96801 Power Management IC - Cirrus Logic CS40L50 Haptic Driver with Waveform Memory - Marvell 88PM886 Power Management IC New Device Support: - Keyboard Backlight to ChromeOS Embedded Controller - LEDs to ChromeOS Embedded Controller - Charge Control to ChromeOS Embedded Controller - HW Monitoring Service to ChromeOS Embedded Controller - AUXADCs to MediaTek MT635{7,8,9} Power Management ICs New Functionality: - Allow Syscon consumers to supply their own Regmaps on registration Fix-ups: - Constify/staticise applicable data structures - Remove superfluous/duplicated/unused sections - Device Tree binding adaptions/conversions/creation - Trivial; spelling, whitespace, coding-style adaptions - Utilise centrally provided helpers and macros to aid simplicity/duplication - Drop i2c_device_id::driver_data where the value is unused - Replace ACPI/DT firmware helpers with agnostic variants - Move over to GPIOD (descriptor-based) APIs - Annotate a bunch of __counted_by() cases - Straighten out some includes Bug Fixes: - Ensure potentially asserted recent lines are deasserted during initialisation - Avoid "<module>.ko is added to multiple modules" warnings - Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings - Fix Wvoid-pointer-to-enum-cast warnings" * tag 'mfd-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (87 commits) mfd: timberdale: Attach device properties to TSC2007 board info mfd: tmio: Move header to platform_data mfd: tmio: Sanitize comments mfd: tmio: Update include files mmc: tmio/sdhi: Fix includes mfd: tmio: Remove obsolete io accessors mfd: tmio: Remove obsolete platform_data watchdog: bd96801_wdt: Add missing include for FIELD_*() dt-bindings: mfd: syscon: Add APM poweroff mailbox dt-bindings: mfd: syscon: Split and enforce documenting MFD children dt-bindings: mfd: rk817: Merge support for RK809 dt-bindings: mfd: rk817: Fixup clocks and reference dai-common dt-bindings: mfd: syscon: Add TI's opp table compatible mfd: omap-usb-tll: Use struct_size to allocate tll dt-bindings: mfd: Explain lack of child dependency in simple-mfd dt-bindings: mfd: Dual licensing for st,stpmic1 bindings mfd: omap-usb-tll: Annotate struct usbtll_omap with __counted_by mfd: tps6594-core: Remove unneeded semicolon in tps6594_check_crc_mode() mfd: lm3533: Move to new GPIO descriptor-based APIs mfd: tps65912: Use devm helper functions to simplify probe ...
2024-07-09mfd: tmio: Move header to platform_dataWolfram Sang
All the MFD components are gone from the header meanwhile. Only the MMC relevant data is left which makes it a platform_data for the MMC controller. Move the header to the now fitting directory. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240213220221.2380-14-wsa+renesas@sang-engineering.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-07-09mmc: tmio/sdhi: Fix includesWolfram Sang
TMIO uses an of_* function, and SDHI uses pm_runtime functions. Add the includes directly, so we can clean up another header properly. Sort the pagemap include while we are here. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402070323.JpYfFtkQ-lkp@intel.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240213220221.2380-11-wsa+renesas@sang-engineering.com Signed-off-by: Lee Jones <lee@kernel.org>
2024-07-08mmc: sdhi: Convert from tasklet to BH workqueueAllen Pais
The only generic interface to execute asynchronously in the BH context is tasklet; however, it's marked deprecated and has some design flaws. To replace tasklets, BH workqueue support was recently added. A BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. This patch converts the SDHI driver from tasklet to BH workqueue. Based on the work done by Tejun Heo <tj@kernel.org> Signed-off-by: Allen Pais <allen.lkml@gmail.com> [wsa: fixed build faliures, corrected whitespace issues] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20240626085015.32171-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-05-03mmc: renesas_sdhi: Add compatible string for RZ/G2L family, RZ/G3S, and ↵Lad Prabhakar
RZ/V2M SoCs - RZ/G2UL and RZ/Five ("r9a07g043") - RZ/G2L(C) ("r9a07g044") - RZ/V2L ("r9a07g054") - RZ/G3S ("r9a08g045") - RZ/V2M ("r9a09g011") The above SoCs have HS400 disabled and use fixed address mode. Add a generic compatible 'renesas,rzg2l-sdhi' fallback string for these SoCs, where fixed_addr_mode and hs400_disabled quirks are applied. For backward compatibility, compatible string 'renesas,sdhi-r9a09g011' for RZ/V2M is retained. Also rename sdhi_quirks_r9a09g011->sdhi_quirks_rzg2l and of_r9a09g011_compatible->of_rzg2l_compatible to make it generic. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20240430145937.133643-4-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-15mmc: renesas_sdhi: Convert to platform remove callback returning voidYangtao Li
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Yangtao Li <frank.li@vivo.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20230727070051.17778-56-frank.li@vivo.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-08-09mmc: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20230718143054.1065288-1-robh@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-03-23mmc: renesas_sdhi: remove R-Car H3 ES1.* handlingWolfram Sang
R-Car H3 ES1.* was only available to an internal development group and needed a lot of quirks and workarounds. These become a maintenance burden now, so our development group decided to remove upstream support and disable booting for this SoC. Public users only have ES2 onwards. Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20230307163041.3815-9-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-01-23mmc: renesas_sdhi: Add RZ/V2M compatible stringFabrizio Castro
The SDHI/eMMC IPs found with the RZ/V2M (a.k.a. r9a09g011), are very similar to the ones found in R-Car Gen3, but they are not exactly the same, and as a result need an SoC specific compatible string for fine tuning driver support. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221213230129.549968-4-fabrizio.castro.jz@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: add helper to access quirksWolfram Sang
Add a macro to check for a quirk because it a) ensures that the check for non-empty 'quirks' struct is not forgotten and b) is easier to read. Convert existing quirk access as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221120113457.42010-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: take DMA end interrupts into accountWolfram Sang
So far, we have been relying on access_end interrupts only to mark DMA transfers as done implying that DMA end interrupts have occurred by then anyhow. On some SoCs under some conditions, this turned out to be not enough. So, we enable DMA interrupts as well and make sure that both events, DMA irq and access_end irq, have happened before finishing the DMA transfer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-6-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: add quirk for broken register layoutWolfram Sang
Some early Gen3 SoCs have the DTRANEND1 bit at a different location than all later SoCs. Because we need the bit soon, add a quirk so we know which bit to use. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: remove accessor function for internal_dmacWolfram Sang
This accessor function does not help readability but makes it worse. Because I soon need to read from the registers as well and don't want to add another function like this, I chose to remove the existing one and use the accessor directly. I also switch from writeq to writel because no 64 bit register is actually involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-21mmc: renesas_sdhi: newer SoCs don't need manual tap correctionTakeshi Saito
The newest Gen3 SoCs and Gen4 SoCs do not need manual tap correction with HS400 anymore. So, instead of checking the SDHI version, add a quirk flag and set manual tap correction only for affected SoCs. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: rebased, renamed the quirk variable, removed stale comment] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220720072901.1266-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: renesas_sdhi: Fix typo'sLad Prabhakar
Fix typo's, * difference -> different * alignment -> aligned While at it updated the comment to make it clear that Renesas SDHI DMAC needs buffers to be 128-byte aligned. Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220624181438.4355-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-07-12mmc: renesas_sdhi: add R-Car Gen4 fallback compatibility stringWolfram Sang
For now, Gen4 is treated the same as Gen3. But we still want a seperate fallback just in case. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220603233300.21789-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: remove superfluous specific M3W entryWolfram Sang
We don't need to specify the Gen3 compatible entry for M3W because it will be provided by the generic Gen3 fallback. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220404130551.20209-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: R-Car V3H ES2.0 gained HS400 supportWolfram Sang
The hardware evolved, so we only need to disable HS400 support on ES1.* revisions. Update the code. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: refactored to top-of-tree] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220404123404.16289-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: R-Car V3M also has no HS400Wolfram Sang
Further digging in the datasheets revealed that R-Car V3M also has no HS400 support. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220404105831.5096-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: Add missing checks for the presence of quirksGeert Uytterhoeven
When running on an system without any quirks (e.g. R-Car V3U), the kernel crashes with a NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000002 ... Hardware name: Renesas Falcon CPU and Breakout boards based on r8a779a0 (DT) Workqueue: events_freezable mmc_rescan ... Call trace: renesas_sdhi_internal_dmac_start_dma+0x54/0x12c tmio_process_mrq+0x124/0x274 Fix this by adding the missing checks for the validatity of the priv->quirks pointer. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/cc3178c2ff60f640f4d5a071d51f6b0b1db37656.1648822020.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: style fix for proper function bodiesWolfram Sang
Put the braces to the proper position to make reading the code easier. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220320124538.62028-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: make 'dmac_only_one_rx' a quirkWolfram Sang
After Shimoda-san's much appreciated refactoring of the quirk handling, we can convert now 'dmac_only_one_rx' from an ugly global flag to a regular quirk. This makes quirk handling more consistent and easier to maintain. After this patch, soc_dma_quirks is completely gone, hooray! Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220320123016.57991-7-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: make 'fixed_addr_mode' a quirkWolfram Sang
After Shimoda-san's much appreciated refactoring of the quirk handling, we can convert now the 'fixed_addr_mode' from an ugly global flag to a regular quirk. This makes quirk handling more consistent and easier to maintain. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220320123016.57991-6-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: remove a stale commentWolfram Sang
The whitelist has been refactored away with a0fb3fc8af01 ("mmc: renesas_sdhi: remove whitelist for internal DMAC") so the comment doesn't make any sense anymore. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220320123016.57991-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: make setup selection more understandableWolfram Sang
When I read 'no_fallback', I forgot what fallback even though I was the author of this change. Name it better to make the code easier to understand. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220320123016.57991-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-04-26mmc: renesas_sdhi: R-Car D3 also has no HS400Wolfram Sang
It is not explicitly expressed in the docs, but the needed data strobe pin is indeed missing for D3. The BSP disables HS400 as well. This means a little refactoring to reuse an already existing setup. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220320123016.57991-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-03-07mmc: host: Drop commas after SoC match table sentinelsGeert Uytterhoeven
It does not make sense to have a comma after a sentinel, as any new elements must be added before the sentinel. Add comments to clarify the purpose of the empty elements. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/9050fa278eaaa9e6ec719a3b158a2fad285560d0.1646311673.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-11-19mmc: renesas_sdhi: Flag non-standard SDnH handling for V3MWolfram Sang
V3M handles SDnH differently than other Gen3 SoCs, so let's add a separate entry for that. This will allow better SDnH handling in the future. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20211110191610.5664-5-wsa+renesas@sang-engineering.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-24mmc: renesas_sdhi: Refactor renesas_sdhi_probe()Yoshihiro Shimoda
Refactor renesas_sdhi_probe() to avoid increasing numbers of sdhi_quirks_match[] entry when we add other stable SoCs like r8a779m*. Note that the sdhi_quirks_match[] is only needed on renesas_sdhi_internal_dmac.c so that of_data of renesas_sdhi_sys_dmac.c keeps as-is. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210729103234.480743-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-04-12mmc: renesas_sdhi: enable WAIT_WHILE_BUSYWolfram Sang
Now that we got the timeout handling in the driver correct, we can use this capability to avoid polling via the MMC core. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210409094606.4317-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01mmc: renesas_internal_dmac: add pre_req and post_req supportYoshihiro Shimoda
Add pre_req and post_req support to improve performance. Inspired by a patch in the BSP by Masaharu Hayakawa. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1608114572-1892-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-01mmc: renesas_sdhi_internal_dmac: Fix DMA buffer alignment from 8 to 128-bytesTakeshi Saito
According to the latest datasheet, the internal DMAC buffer alignment R-Car Gen3 SDHI HW should be 128-bytes. So, fix it. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [shimoda: revise commit description, rebase] Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/1608114572-1892-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.14 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # SDHI drivers Link: https://lore.kernel.org/r/20200903162412.3.Id1ff21470f08f427aedd0a6535dcd83ccc56b278@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: renesas_sdhi: Drop local dma_parmsRobin Murphy
Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices"), struct platform_device already provides a dma_parms structure, so we can save allocating another one. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/85e1fc97dbec3dea96102785a5e308ccb5e91cfe.1599167798.git.robin.murphy@arm.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: Fix dma unmapping in error casesYoshihiro Shimoda
If this controller doesn't issue interrupt for response of command, this driver lacks to call dma_unmap_sg(). So, fix the issue by using end() of struct tmio_mmc_dma_ops. Reported-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-4-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: clean up the code for dma completeYoshihiro Shimoda
To add end() operation in the future, clean the code of renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: renesas_sdhi: use recent tap values for HS400Wolfram Sang
New datasheets require different and new values for HS400 with 4taps or 8taps. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191203200513.1758-6-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-16mmc: renesas_sdhi: remove whitelist for internal DMACWolfram Sang
We know now that there won't be Gen3 SoCs with both, SYS-DMAC and internal DMAC. We removed the blacklisting for SYS-DMAC already, so we can remove the whitelisting for internal DMAC, too. This makes adding new SoCs easier. We keep the quirk handling, of course. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191203194859.917-1-wsa@the-dreams.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-11-13mmc: renesas_sdhi_internal_dmac: Add r8a774b1 supportBiju Das
This patch adds SDHI support for RZ/G2N (R8A774B1) SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-09-12mmc: renesas_sdhi_internal_dmac: Add MMC_CAP2_MERGE_CAPABLEYoshihiro Shimoda
Since this host controller can merge bigger segments if DMA API layer cam merge the segments, this patch adds the flag. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-04-15mmc: renesas_sdhi: prevent overflow for max_req_sizeWolfram Sang
max_req_size is calculated by 'max_blk_size * max_blk_count' in the TMIO core. So, specifying U32_MAX as max_blk_count will overflow this calculation. It will cause no harm in practice because the immense high number will overflow into another immense high number. However, it is not good coding practice, so calculate max_blk_count so that max_req_size will fit into unsigned int on ARM32/64. Thanks to the Renesas BSP team for the bug report! Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: renesas_sdhi: update copyright informationWolfram Sang
Mostly year updates, but one addition as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-25mmc: renesas_sdhi: Change HW adjustment register according to speed modeTakeshi Saito
SCC is used for SDR104/HS200/HS400. We need to change SCC_DT2FF according to the mode. If it is inappropriate, CRC error tends to occur. This adds variable "tap_hs400" for HS400 mode and configures SCC_DT2FF as needed. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: rebased to upstream and updated commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Tested-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: renesas_sdhi_internal_dmac: Whitelist r8a774c0Biju Das
We need r8a774c0 to be whitelisted for SDHI to work on the RZ/G2E, but we don't care about the revision of the SoC, so just whitelist the generic part number. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: renesas_sdhi: align compatibility properties for H3 and M3-WNiklas Söderlund
It was though all ES revisions of H3 and M3-W SoCs required the TMIO_MMC_HAVE_4TAP_HS400 flag. Recent datasheet updates tells us this is not true, only early ES revisions of the SoC do. Since quirk matching based on ES revisions is now used to handle the flag it's possible to align all Gen3 compatibility properties. This will allow later ES revisions of H3 and M3-W to use the correct 8-tap HS400 mode. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: renesas_sdhi: Whitelist R8A77990 SDHIMarek Vasut
Whitelist R8A77990 E3 SoC in the SDHI driver. The SDHI core present in the SoC is an 8tap variant of the Gen3 SDHI core. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-renesas-soc@vger.kernel.org Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: renesas_sdhi_internal_dmac: Add R7S9210 supportChris Brandt
The SDHI/MMC controller in the RZ/A2 is almost the same as R-Car gen3, but with some minor differences. Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15mmc: tmio: simplify the DMA mode testMasahiro Yamada
host->chan_{rx,tx} represents the DMA capability of the platform. Even if DMA is supported, there are cases where we want to use PIO, for example, data length is short enough as commit 5f52c3552946 ("mmc: tmio: use PIO for short transfers") mentioned. Regarding the hardware control flow, we are interested in whether DMA is currently enabled or not, instead of whether the platform has the DMA capability. Hence, the several conditionals in tmio_mmc_core.c end up with checking host->chan_{rx,tx} and !host->force_pio. This is not nice. Let's flip the flag host->force_pio into host->dma_on. host->dma_on represents whether the DMA is currently enabled or not. This flag is set false in the beginning of each command, then should be set true by tmio_mmc_start_dma() when the DMA is turned on. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit (git 2.34.1) at 2025-05-03 08:06:02 +0000