summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd
AgeCommit message (Collapse)Author
2024-05-08net: annotate data-races around dev->if_portEric Dumazet
Various ndo_set_config() methods can change dev->if_port dev->if_port is going to be read locklessly from rtnl_fill_link_ifmap(). Add corresponding WRITE_ONCE() on writer sides. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240507184144.1230469-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-22devlink: extend devlink_param *set pointerMateusz Polchlopek
Extend devlink_param *set function pointer to take extack as a param. Sometimes it is needed to pass information to the end user from set function. It is more proper to use for that netlink instead of passing message to dmesg. Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/unix/garbage.c 47d8ac011fe1 ("af_unix: Fix garbage collector racing against connect()") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt.c faa12ca24558 ("bnxt_en: Reset PTP tx_avail after possible firmware reset") b3d0083caf9a ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()") drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c 7ac10c7d728d ("bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init()") 194fad5b2781 ("bnxt_en: Refactor bnxt_rdma_aux_device_init/uninit functions") drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c 958f56e48385 ("net/mlx5e: Un-expose functions in en.h") 49e6c9387051 ("net/mlx5e: RSS, Block XOR hash with over 128 channels") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-10pds_core: Fix pdsc_check_pci_health function to use work threadBrett Creeley
When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: <TASK> ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running. Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-08net: handle HAS_IOPORT dependenciesNiklas Schnelle
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at compile time. We thus need to add HAS_IOPORT as dependency for those drivers requiring them. For the DEFXX driver the use of I/O ports is optional and we only need to fence specific code paths. It also turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need the !S390 dependency and successfully builds the bpqether driver. Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Co-developed-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-05net: xgbe: remove extraneous #ifdef checksArnd Bergmann
When both ACPI and OF are disabled, xgbe_v1 is unused and causes a W=1 warning: drivers/net/ethernet/amd/xgbe/xgbe-platform.c:533:39: error: unused variable 'xgbe_v1' [-Werror,-Wunused-const-variable] static const struct xgbe_version_data xgbe_v1 = { There is no real point in trying to save a few bytes for the match tables, so just make them always visible. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240403080702.3509288-29-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-26net: amd8111e: Drop unused copy of pm_capBjorn Helgaas
The copy of pdev->pm_cap in struct amd8111e_priv is never used. Drop it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240325220633.1453180-1-helgaas@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07net: pds_core: Fix possible double free in error handling pathYongzhi Liu
When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), Callback function pdsc_auxbus_dev_release calls kfree(padev) to free memory. We shouldn't call kfree(padev) again in the error handling path. Fix this by cleaning up the redundant kfree() and putting the error handling back to where the errors happened. Fixes: 4569cce43bc6 ("pds_core: add auxiliary_bus devices") Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240306105714.20597-1-hyperlyzcs@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-19pds_core: use pci_reset_function for health resetShannon Nelson
We get the benefit of all the PCI reset locking and recovery if we use the existing pci_reset_function() that will call our local reset handlers. Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-19pds_core: delete VF dev on resetShannon Nelson
When the VF is hit with a reset, remove the aux device in the prepare for reset and try to restore it after the reset. The userland mechanics will need to recover and rebuild whatever uses the device afterwards. Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-19pds_core: add simple AER handlerShannon Nelson
Set up the pci_error_handlers error_detected and resume to be useful in handling AER events. Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-12pds_core: no health-thread in VF pathShannon Nelson
The VFs don't run the health thread, so don't try to stop or restart the non-existent timer or work item. Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove") Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240210002002.49483-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-06pds_core: Clean up init/uninit flows to be more readableBrett Creeley
The setup and teardown flows are somewhat hard to follow regarding pdsc_core_init()/pdsc_dev_init() and their corresponding teardown flows being in pdsc_teardown(). Improve the readability by adding new pdsc_core_uninit()/pdsc_dev_unint() functions that mirror their init counterparts. Also, move the notify and admin qcq allocations into pdsc_core_init(), so they can be freed in pdsc_core_uninit(). Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-06pds_core: Fix up some minor issuesBrett Creeley
Running xmastree.py against the driver found some RCT issues, so fix them. Also, if allocating pdsc->intr_info in pdsc_dev_init() fails the driver still tries to free pdsc->intr_info. Fix this by just returning -ENOMEM since there's nothing to free at this point of failure. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-06pds_core: Unmask adminq interrupt in work threadBrett Creeley
Unmasking the interrupt during the pdsc_adminq_isr is a bit early and could cause unnecessary interrupts. Instead always unmask after processing the adminq and notifyq in pdsc_work_thread()->pdsc_process_adminq(). Also, since we are always unmasking, there's no need for the local credits variable in pdsc_process_adminq(). Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-02-06pds_core: Don't assign interrupt index/bound_intr to notifyqBrett Creeley
The notifyq rides on the adminq's interrupt, so there's no need to setup and/or access the notifyq's interrupt index or bound_intr. The driver sets the bound_intr using qcq->intx = -1 for the notifyq, but luckily nothing accesses that field for notifyq. Instead of expecting that remains the case, just clean up the notifyq's interrupt index and bound_intr fields. Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-31pds_core: Rework teardown/setup flow to be more commonBrett Creeley
Currently the teardown/setup flow for driver probe/remove is quite a bit different from the reset flows in pdsc_fw_down()/pdsc_fw_up(). One key piece that's missing are the calls to pci_alloc_irq_vectors() and pci_free_irq_vectors(). The pcie reset case is calling pci_free_irq_vectors() on reset_prepare, but not calling the corresponding pci_alloc_irq_vectors() on reset_done. This is causing unexpected/unwanted interrupt behavior due to the adminq interrupt being accidentally put into legacy interrupt mode. Also, the pci_alloc_irq_vectors()/pci_free_irq_vectors() functions are being called directly in probe/remove respectively. Fix this inconsistency by making the following changes: 1. Always call pdsc_dev_init() in pdsc_setup(), which calls pci_alloc_irq_vectors() and get rid of the now unused pds_dev_reinit(). 2. Always free/clear the pdsc->intr_info in pdsc_teardown() since this structure will get re-alloced in pdsc_setup(). 3. Move the calls of pci_free_irq_vectors() to pdsc_teardown() since pci_alloc_irq_vectors() will always be called in pdsc_setup()->pdsc_dev_init() for both the probe/remove and reset flows. 4. Make sure to only create the debugfs "identity" entry when it doesn't already exist, which it will in the reset case because it's already been created in the initial call to pdsc_dev_init(). Fixes: ffa55858330f ("pds_core: implement pci reset handlers") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240129234035.69802-7-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Clear BARs on resetBrett Creeley
During reset the BARs might be accessed when they are unmapped. This can cause unexpected issues, so fix it by clearing the cached BAR values so they are not accessed until they are re-mapped. Also, make sure any places that can access the BARs when they are NULL are prevented. Fixes: 49ce92fbee0b ("pds_core: add FW update feature to devlink") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-6-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Prevent race issues involving the adminqBrett Creeley
There are multiple paths that can result in using the pdsc's adminq. [1] pdsc_adminq_isr and the resulting work from queue_work(), i.e. pdsc_work_thread()->pdsc_process_adminq() [2] pdsc_adminq_post() When the device goes through reset via PCIe reset and/or a fw_down/fw_up cycle due to bad PCIe state or bad device state the adminq is destroyed and recreated. A NULL pointer dereference can happen if [1] or [2] happens after the adminq is already destroyed. In order to fix this, add some further state checks and implement reference counting for adminq uses. Reference counting was used because multiple threads can attempt to access the adminq at the same time via [1] or [2]. Additionally, multiple clients (i.e. pds-vfio-pci) can be using [2] at the same time. The adminq_refcnt is initialized to 1 when the adminq has been allocated and is ready to use. Users/clients of the adminq (i.e. [1] and [2]) will increment the refcnt when they are using the adminq. When the driver goes into a fw_down cycle it will set the PDSC_S_FW_DEAD bit and then wait for the adminq_refcnt to hit 1. Setting the PDSC_S_FW_DEAD before waiting will prevent any further adminq_refcnt increments. Waiting for the adminq_refcnt to hit 1 allows for any current users of the adminq to finish before the driver frees the adminq. Once the adminq_refcnt hits 1 the driver clears the refcnt to signify that the adminq is deleted and cannot be used. On the fw_up cycle the driver will once again initialize the adminq_refcnt to 1 allowing the adminq to be used again. Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-5-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Use struct pdsc for the pdsc_adminq_isr private dataBrett Creeley
The initial design for the adminq interrupt was done based on client drivers having their own adminq and adminq interrupt. So, each client driver's adminq isr would use their specific adminqcq for the private data struct. For the time being the design has changed to only use a single adminq for all clients. So, instead use the struct pdsc for the private data to simplify things a bit. This also has the benefit of not dereferencing the adminqcq to access the pdsc struct when the PDSC_S_STOPPING_DRIVER bit is set and the adminqcq has actually been cleared/freed. Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-4-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Cancel AQ work on teardownBrett Creeley
There is a small window where pdsc_work_thread() calls pdsc_process_adminq() and pdsc_process_adminq() passes the PDSC_S_STOPPING_DRIVER check and starts to process adminq/notifyq work and then the driver starts a fw_down cycle. This could cause some undefined behavior if the notifyqcq/adminqcq are free'd while pdsc_process_adminq() is running. Use cancel_work_sync() on the adminqcq's work struct to make sure any pending work items are cancelled and any in progress work items are completed. Also, make sure to not call cancel_work_sync() if the work item has not be initialized. Without this, traces will happen in cases where a reset fails and teardown is called again or if reset fails and the driver is removed. Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-3-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31pds_core: Prevent health thread from running during reset/removeBrett Creeley
The PCIe reset handlers can run at the same time as the health thread. This can cause the health thread to stomp on the PCIe reset. Fix this by preventing the health thread from running while a PCIe reset is happening. As part of this use timer_shutdown_sync() during reset and remove to make sure the timer doesn't ever get rearmed. Fixes: ffa55858330f ("pds_core: implement pci reset handlers") Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20240129234035.69802-2-brett.creeley@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13net: ethtool: pass a pointer to parameters to get/set_rxfh ethtool opsAhmed Zaki
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters as direct function arguments. This will force us to change the API (and all drivers' functions) every time some new parameters are added. This is part 1/2 of the fix, as suggested in [1]: - First simplify the code by always providing a pointer to all params (indir, key and func); the fact that some of them may be NULL seems like a weird historic thing or a premature optimization. It will simplify the drivers if all pointers are always present. - Then make the functions take a dev pointer, and a pointer to a single struct wrapping all arguments. The set_* should also take an extack. Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1] Suggested-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-13amd-xgbe: Avoid potential string truncation in nameKees Cook
Build with W=1 were warning about a potential string truncation: drivers/net/ethernet/amd/xgbe/xgbe-drv.c: In function 'xgbe_alloc_channels': drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:73: warning: '%u' directive output may be truncated writing between 1 and 10 bytes into a region of size 8 [-Wformat-truncation=] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:64: note: directive argument in the range [0, 4294967294] 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~ drivers/net/ethernet/amd/xgbe/xgbe-drv.c:211:17: note: 'snprintf' output between 10 and 19 bytes into a destination of size 16 211 | snprintf(channel->name, sizeof(channel->name), "channel-%u", i); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Increase the size of the "name" buffer to handle the full format range. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312100937.ZPZCARhB-lkp@intel.com/ Cc: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20231212221312.work.830-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-23amd-xgbe: propagate the correct speed and duplex statusRaju Rangoju
xgbe_get_link_ksettings() does not propagate correct speed and duplex information to ethtool during cable unplug. Due to which ethtool reports incorrect values for speed and duplex. Address this by propagating correct information. Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle the corner-case during tx completionRaju Rangoju
The existing implementation uses software logic to accumulate tx completions until the specified time (1ms) is met and then poll them. However, there exists a tiny gap which leads to a race between resetting and checking the tx_activate flag. Due to this the tx completions are not reported to upper layer and tx queue timeout kicks-in restarting the device. To address this, introduce a tx cleanup mechanism as part of the periodic maintenance process. Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-23amd-xgbe: handle corner-case during sfp hotplugRaju Rangoju
Force the mode change for SFI in Fixed PHY configurations. Fixed PHY configurations needs PLL to be enabled while doing mode set. When the SFP module isn't connected during boot, driver assumes AN is ON and attempts auto-negotiation. However, if the connected SFP comes up in Fixed PHY configuration the link will not come up as PLL isn't enabled while the initial mode set command is issued. So, force the mode change for SFI in Fixed PHY configuration to fix link issues. Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy") Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-11-14pds_core: fix up some format-truncation complaintsShannon Nelson
Our friendly kernel test robot pointed out a couple of potential string truncation issues. None of which were we worried about, but can be relatively easily fixed to quiet the complaints. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310211736.66syyDpp-lkp@intel.com/ Fixes: 45d76f492938 ("pds_core: set up device and adminq") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20231113183257.71110-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14pds_core: use correct index to mask irqShannon Nelson
Use the qcq's interrupt index, not the irq number, to mask the interrupt. Since the irq number can be out of range from the number of possible interrupts, we can end up accessing and potentially scribbling on out-of-range and/or unmapped memory, making the kernel angry. [ 3116.039364] BUG: unable to handle page fault for address: ffffbeea1c3edf84 [ 3116.047059] #PF: supervisor write access in kernel mode [ 3116.052895] #PF: error_code(0x0002) - not-present page [ 3116.058636] PGD 100000067 P4D 100000067 PUD 1001f2067 PMD 10f82e067 PTE 0 [ 3116.066221] Oops: 0002 [#1] SMP NOPTI [ 3116.092948] RIP: 0010:iowrite32+0x9/0x76 [ 3116.190452] Call Trace: [ 3116.193185] <IRQ> [ 3116.195430] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.200298] ? show_trace_log_lvl+0x1d6/0x2f9 [ 3116.205166] ? pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.210618] ? __die_body.cold+0x8/0xa [ 3116.214806] ? page_fault_oops+0x16d/0x1ac [ 3116.219382] ? exc_page_fault+0xbe/0x13b [ 3116.223764] ? asm_exc_page_fault+0x22/0x27 [ 3116.228440] ? iowrite32+0x9/0x76 [ 3116.232143] pdsc_adminq_isr+0x43/0x55 [pds_core] [ 3116.237627] __handle_irq_event_percpu+0x3a/0x184 [ 3116.243088] handle_irq_event+0x57/0xb0 [ 3116.247575] handle_edge_irq+0x87/0x225 [ 3116.252062] __common_interrupt+0x3e/0xbc [ 3116.256740] common_interrupt+0x7b/0x98 [ 3116.261216] </IRQ> [ 3116.263745] <TASK> [ 3116.266268] asm_common_interrupt+0x22/0x27 Reported-by: Joao Martins <joao.m.martins@oracle.com> Fixes: 01ba61b55b20 ("pds_core: Add adminq processing and commands") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20231113183257.71110-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-25amd/pds_core: core: No need for Null pointer check before kfreeBragatheswaran Manickavel
kfree()/vfree() internally perform NULL check on the pointer handed to it and take no action if it indeed is NULL. Hence there is no need for a pre-check of the memory pointer before handing it to kfree()/vfree(). Issue reported by ifnullfree.cocci Coccinelle semantic patch script. Signed-off-by: Bragatheswaran Manickavel <bragathemanick0908@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-20pds_core: add an error code check in pdsc_dl_info_getSu Hui
check the value of 'ret' after call 'devlink_info_version_stored_put'. Signed-off-by: Su Hui <suhui@nfschina.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20231019083351.1526484-1-suhui@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-20pds_core: devlink health: use retained error fmsg APIPrzemek Kitszel
Drop unneeded error checking. devlink_fmsg_*() family of functions is now retaining errors, so there is no need to check for them after each call. Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-13net: ethernet: Use device_get_match_data()Rob Herring
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-20net: ethernet: amd: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18pds_core: add attempts to fix broken PCIShannon Nelson
If we see a 0xff value from a PCI register read, we know that the PCI connection is broken, possibly by a low level reset that didn't go through the nice pci_error_handlers path. Make use of the PCI cleanup code that we already have from the reset handlers and add some detection and attempted recovery from a broken PCI connection. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18pds_core: implement pci reset handlersShannon Nelson
Implement the callbacks for a nice PCI reset. These get called when a user is nice enough to use the sysfs PCI reset entry, e.g. echo 1 > /sys/bus/pci/devices/0000:2b:00.0/reset Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18pds_core: keep viftypes table across resetShannon Nelson
Keep the viftypes and the current enable/disable states across a recovery action. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-18pds_core: check health in devcmd waitShannon Nelson
Similar to what we do in the AdminQ, check for devcmd health while waiting for an answer. Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-30Merge tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO updates from Alex Williamson: - VFIO direct character device (cdev) interface support. This extracts the vfio device fd from the container and group model, and is intended to be the native uAPI for use with IOMMUFD (Yi Liu) - Enhancements to the PCI hot reset interface in support of cdev usage (Yi Liu) - Fix a potential race between registering and unregistering vfio files in the kvm-vfio interface and extend use of a lock to avoid extra drop and acquires (Dmitry Torokhov) - A new vfio-pci variant driver for the AMD/Pensando Distributed Services Card (PDS) Ethernet device, supporting live migration (Brett Creeley) - Cleanups to remove redundant owner setup in cdx and fsl bus drivers, and simplify driver init/exit in fsl code (Li Zetao) - Fix uninitialized hole in data structure and pad capability structures for alignment (Stefan Hajnoczi) * tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits) vfio/pds: Send type for SUSPEND_STATUS command vfio/pds: fix return value in pds_vfio_get_lm_file() pds_core: Fix function header descriptions vfio: align capability structures vfio/type1: fix cap_migration information leak vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver vfio/pds: Add Kconfig and documentation vfio/pds: Add support for firmware recovery vfio/pds: Add support for dirty page tracking vfio/pds: Add VFIO live migration support vfio/pds: register with the pds_core PF pds_core: Require callers of register/unregister to pass PF drvdata vfio/pds: Initial support for pds VFIO driver vfio: Commonize combine_ranges for use in other VFIO drivers kvm/vfio: avoid bouncing the mutex when adding and deleting groups kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add() docs: vfio: Add vfio device cdev description vfio: Compile vfio_group infrastructure optionally vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev() ...
2023-08-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in late fixes to prepare for the 6.6 net-next PR. No conflicts. Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-25pds_core: pass opcode to devcmd_waitShannon Nelson
Don't rely on the PCI memory for the devcmd opcode because we read a 0xff value if the PCI bus is broken, which can cause us to report a bogus dev_cmd opcode later. Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-6-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: check for work queue before useShannon Nelson
Add a check that the wq exists before queuing up work for a failed devcmd, as the PF is responsible for health and the VF doesn't have a wq. Fixes: c2dbb0904310 ("pds_core: health timer and workqueue") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-5-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: no reset command for VFShannon Nelson
The VF doesn't need to send a reset command, and in a PCI reset scenario it might not have a valid IO space to write to anyway. Fixes: 523847df1b37 ("pds_core: add devcmd device interfaces") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-4-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: no health reporter in VFShannon Nelson
Make sure the health reporter is set up before we use it in our devlink health updates, especially since the VF doesn't set up the health reporter. Fixes: 25b450c05a49 ("pds_core: add devlink health facilities") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-3-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-25pds_core: protect devlink callbacks from fw_down stateShannon Nelson
Don't access structs that have been cleared when in the fw_down state and the various structs have been cleaned and are waiting to recover. This caused a panic on rmmod when already in fw_down and devlink_param_unregister() tried to check the parameters. Fixes: 40ced8944536 ("pds_core: devlink params for enabling VIF support") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230824161754.34264-2-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-21Revert "pds_core: Fix some kernel-doc comments"Jakub Kicinski
This reverts commit cb39c35783f26892bb1a72b1115c94fa2e77f4c5. Patch was applied to hastily, the problem is already fixed in Alex's vfio tree: https://lore.kernel.org/all/20230821112237.105872b5.alex.williamson@redhat.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-21pds_core: Fix some kernel-doc commentsYang Li
Fix some kernel-doc comments to silence the warnings: drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Function parameter or member 'pf' not described in 'pds_client_register' drivers/net/ethernet/amd/pds_core/auxbus.c:18: warning: Excess function parameter 'pf_pdev' description in 'pds_client_register' drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Function parameter or member 'pf' not described in 'pds_client_unregister' drivers/net/ethernet/amd/pds_core/auxbus.c:58: warning: Excess function parameter 'pf_pdev' description in 'pds_client_unregister' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-31 02:49:31 +0000