| Age | Commit message (Collapse) | Author |
|---|
|
Issue flagged by coverity. Add a safety check for the return value
of dma_set_mask_and_coherent, go to a safe exit if it returns error.
Link: https://scan7.scan.coverity.com/#/project-view/53936/11354?selectedIssue=1643754
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://patch.msgid.link/20250526032034.84900-1-sperezglz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a situation where after THALT is set high, TGO stays high as
well. Because jiffies are never updated, as we are in a context with
interrupts disabled, we never exit that loop and have a deadlock.
That deadlock was noticed on a sama5d4 device that stayed locked for days.
Use retries instead of jiffies so that the timeout really works and we do
not have a deadlock anymore.
Fixes: e86cd53afc590 ("net/macb: better manage tx errors")
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250509121935.16282-1-othacehe@gnu.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
of_gpio.h is deprecated. Since there is no of_gpio_x API, drop
unused of_gpio.h. While at here, drop gpio.h and gpio/consumer.h if
no user in driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250320031542.3960381-1-peng.fan@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When a character array without a terminating NUL character has a static
initializer, GCC 15's -Wunterminated-string-initialization will only
warn if the array lacks the "nonstring" attribute[1]. Mark the arrays
with __nonstring to correctly identify the char array as "not a C string"
and thereby eliminate the warning:
In file included from ../drivers/net/ethernet/cadence/macb_main.c:42:
../drivers/net/ethernet/cadence/macb.h:1070:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1070:9: note: in expansion of macro 'GEM_STAT_TITLE'
1070 | GEM_STAT_TITLE(TX1519CNT, "tx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1097:35: warning: initializer-string for array of 'char' truncates NUL terminator but destination lacks 'nonstring' attribute (33 chars into 32 available) [-Wunterminated-string-initialization]
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../drivers/net/ethernet/cadence/macb.h:1050:24: note: in definition of macro 'GEM_STAT_TITLE_BITS'
1050 | .stat_string = title, \
| ^~~~~
../drivers/net/ethernet/cadence/macb.h:1097:9: note: in expansion of macro 'GEM_STAT_TITLE'
1097 | GEM_STAT_TITLE(RX1519CNT, "rx_greater_than_1518_byte_frames"),
| ^~~~~~~~~~~~~~
Since these strings are copied with memcpy() they do not need to be
NUL terminated, and can use __nonstring:
memcpy(p, gem_statistics[i].stat_string,
ETH_GSTRING_LEN);
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=117178 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312200700.make.521-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The new stats calculations add several additional calls to
macb/gem_update_stats() and accesses to bp->hw_stats. These are
protected by a spinlock since commit fa52f15c745c ("net: cadence: macb:
Synchronize stats calculations"), which was applied in parallel. Add
some locking now that the net has been merged into net-next.
Fixes: f6af690a295a ("net: cadence: macb: Report standard stats")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250303231832.1648274-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc5).
Conflicts:
drivers/net/ethernet/cadence/macb_main.c
fa52f15c745c ("net: cadence: macb: Synchronize stats calculations")
75696dd0fd72 ("net: cadence: macb: Convert to get_stats64")
https://lore.kernel.org/20250224125848.68ee63e5@canb.auug.org.au
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_sriov.c
79990cf5e7ad ("ice: Fix deinitializing VF in error path")
a203163274a4 ("ice: simplify VF MSI-X managing")
net/ipv4/tcp.c
18912c520674 ("tcp: devmem: don't write truncated dmabuf CMSGs to userspace")
297d389e9e5b ("net: prefix devmem specific helpers")
net/mptcp/subflow.c
8668860b0ad3 ("mptcp: reset when MPTCP opts are dropped after join")
c3349a22c200 ("mptcp: consolidate subflow cleanup")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement byte queue limits to allow queuing disciplines to account for
packets enqueued in the ring buffer but not yet transmitted. There are a
separate set of transmit functions for AT91 that I haven't touched since
I don't have hardware to test on.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220164257.96859-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Stats calculations involve a RMW to add the stat update to the existing
value. This is currently not protected by any synchronization mechanism,
so data races are possible. Add a spinlock to protect the update. The
reader side could be protected using u64_stats, but we would still need
a spinlock for the update side anyway. And we always do an update
immediately before reading the stats anyway.
Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250220162950.95941-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report standard statistics using the dedicated callbacks instead of
get_ethtool_stats.
OCTTX is split over two registers. Accumulating these registers
separately in gem_stats just means we need to combine them again later.
Instead, combine these stats before saving them, like is done for
ethtool_stats.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250214212703.2618652-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the existing get_stats implementation to get_stats64. Since we
now report 64-bit values, increase the counters to 64-bits as well.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250214212703.2618652-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As all PCS are using the neg_mode parameter rather than the legacy
an_mode, remove the ability to use the legacy an_mode. We remove the
tests in the phylink code, unconditionally passing the PCS neg_mode
parameter to PCS methods, and remove setting the flag from drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tidPn-0040hd-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current neg_mode into the .pcs_get_state() method. Update all
users of phylink PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1tXGeT-000Et3-4L@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Utilize a new helper function rgmii_clock().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jan Petrous (OSS) <jan.petrous@oss.nxp.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20241205-upstream_s32cc_gmac-v8-10-ec1d180df815@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the "mdio" child node directly to `macb_mdiobus_register` to avoid
performing the node lookup twice.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241030085224.2632426-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc4).
Conflicts:
107a034d5c1e ("net/mlx5: qos: Store rate groups in a qos domain")
1da9cfd6c41c ("net/mlx5: Unregister notifier on eswitch init failure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
fixed-link PHY
A boot delay was introduced by commit 79540d133ed6 ("net: macb: Fix
handling of fixed-link node"). This delay was caused by the call to
`mdiobus_register()` in cases where a fixed-link PHY was present. The
MDIO bus registration triggered unnecessary PHY address scans, leading
to a 20-second delay due to attempts to detect Clause 45 (C45)
compatible PHYs, despite no MDIO bus being attached.
The commit 79540d133ed6 ("net: macb: Fix handling of fixed-link node")
was originally introduced to fix a regression caused by commit
7897b071ac3b4 ("net: macb: convert to phylink"), which caused the driver
to misinterpret fixed-link nodes as PHY nodes. This resulted in warnings
like:
mdio_bus f0028000.ethernet-ffffffff: fixed-link has invalid PHY address
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 0
...
mdio_bus f0028000.ethernet-ffffffff: scan phy fixed-link at address 31
This patch reworks the logic to avoid registering and allocation of the
MDIO bus when:
- The device tree contains a fixed-link node.
- There is no "mdio" child node in the device tree.
If a child node named "mdio" exists, the MDIO bus will be registered to
support PHYs attached to the MACB's MDIO bus. Otherwise, with only a
fixed-link, the MDIO bus is skipped.
Tested on a sama5d35 based system with a ksz8863 switch attached to
macb0.
Fixes: 79540d133ed6 ("net: macb: Fix handling of fixed-link node")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241013052916.3115142-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After commit 0edb555a65d1 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/ethernet to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As per the SAMA5D2 device specification it supports Jumbo frames.
But the suggested flag and length of bytes it supports was not updated
in this driver config_structure.
The maximum jumbo frames the device supports:
10240 bytes as per the device spec.
While changing the MTU value greater than 1500, it threw error:
sudo ifconfig eth1 mtu 9000
SIOCSIFMTU: Invalid argument
Add this support to driver so that it works as expected and designed.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20241003171941.8814-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it.
While at it, move to PCI_VDEVICE() macro and usual pattern for
PCI device ID.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20240913125146.3628751-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The responsibility for reporting of RX software timestamp has moved to
the core layer (see __ethtool_get_ts_info()), remove usage from the
device drivers.
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://patch.msgid.link/20240906144632.404651-6-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This NIC doesn't have hardware IRQ coalescing. Under high load,
interrupts can adversely affect performance. To mitigate this, enable
software IRQ coalescing by default. On my system this increases receive
throughput with iperf3 from 853 MBit/sec to 934 MBit/s, decreases
interrupts from 69489/sec to 2016/sec, and decreases CPU utilization
from 27% (4x Cortex-A53) to 14%. Latency is not affected (as far as I
can tell).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903184912.4151926-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Increase max_mtu from 1500 to 1518 bytes when not configured for jumbo
frames. Use 1536 as a starting point as documented in macb.h for
oversized (big) frames, which is the configuration applied in case
jumbo frames capability is not configured; ref. macb_main.c.
Signed-off-by: Pieter Van Trappen <pieter.van.trappen@cern.ch>
Link: https://patch.msgid.link/20240812090657.583821-1-vtpieter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
Documentation/devicetree/bindings/net/fsl,qoriq-mc-dpmac.yaml
c25504a0ba36 ("dt-bindings: net: fsl,qoriq-mc-dpmac: add missed property phys")
be034ee6c33d ("dt-bindings: net: fsl,qoriq-mc-dpmac: using unevaluatedProperties")
https://lore.kernel.org/20240815110934.56ae623a@canb.auug.org.au
drivers/net/dsa/vitesse-vsc73xx-core.c
5b9eebc2c7a5 ("net: dsa: vsc73xx: pass value in phy_write operation")
fa63c6434b6f ("net: dsa: vsc73xx: check busy flag in MDIO operations")
2524d6c28bdc ("net: dsa: vsc73xx: use defined values in phy operations")
https://lore.kernel.org/20240813104039.429b9fe6@canb.auug.org.au
Resolve by using FIELD_PREP(), Stephen's resolution is simpler.
Adjacent changes:
net/vmw_vsock/af_vsock.c
69139d2919dd ("vsock: fix recursive ->recvmsg calls")
744500d81f81 ("vsock: add support for SIOCOUTQ ioctl")
Link: https://patch.msgid.link/20240815141149.33862-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In macb_suspend(), idev->ifa_list is fetched with rcu_access_pointer()
and later the pointer is dereferenced as ifa->ifa_local.
So, idev->ifa_list must be fetched with rcu_dereference().
Fixes: 0cb8de39a776 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240808040021.6971-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the macb driver. This transition ensures compatibility
with the latest design and enhances performance.
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://patch.msgid.link/20240730183403.4176544-5-allen.lkml@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend wake-on LAN support with an ARP packet.
Currently, if PHY supports WOL, ethtool ignores the modes supported
by MACB. This change extends the WOL modes with MACB supported modes.
Advertise wake-on LAN supported modes by default without relying on
dt node. By default, wake-on LAN will be in disabled state.
Using ethtool, users can enable/disable or choose packet types.
For wake-on LAN via ARP, ensure the IP address is assigned and
report an error otherwise.
Co-developed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # on SAMA7G5
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Enable queue disable for Versal devices.
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When GEM is used as a wake device, it is not mandatory for the RX DMA
to be active. The RX engine in IP only needs to receive and identify
a wake packet through an interrupt. The wake packet is of no further
significance; hence, it is not required to be copied into memory.
By disabling RX DMA during suspend, we can avoid unnecessary DMA
processing of any incoming traffic.
During suspend, perform either of the below operations:
- tie-off/dummy descriptor: Disable unused queues by connecting
them to a looped descriptor chain without free slots.
- queue disable: The newer IP version allows disabling individual queues.
Co-developed-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Tested-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # on SAMA7G5
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The hardware timestamping through ndo_eth_ioctl() is going away.
Convert the macb driver to the new API before that can be removed.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate()
which can sleep. This results in:
| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
| pps pps1: new PPS source ptp1
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| 4 locks held by kworker/u4:3/40:
| #0: ffff000003409148
| macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered.
| ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c
| #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c
| #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8
| #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac
| irq event stamp: 113998
| hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64
| hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8
| softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4
| softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c
| CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368
| Hardware name: ... ZynqMP ... (DT)
| Workqueue: events_power_efficient phylink_resolve
| Call trace:
| dump_backtrace+0x98/0xf0
| show_stack+0x18/0x24
| dump_stack_lvl+0x60/0xac
| dump_stack+0x18/0x24
| __might_resched+0x144/0x24c
| __might_sleep+0x48/0x98
| __mutex_lock+0x58/0x7b0
| mutex_lock_nested+0x24/0x30
| clk_prepare_lock+0x4c/0xa8
| clk_set_rate+0x24/0x8c
| macb_mac_link_up+0x25c/0x2ac
| phylink_resolve+0x178/0x4e8
| process_one_work+0x1ec/0x51c
| worker_thread+0x1ec/0x3e4
| kthread+0x120/0x124
| ret_from_fork+0x10/0x20
The obvious fix is to move the call to macb_set_tx_clk() out of the
protected area. This seems safe as rx and tx are both disabled anyway at
this point.
It is however not entirely clear what the spinlock shall protect. It
could be the read-modify-write access to the NCFGR register, but this
is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well
without holding the spinlock. It could also be the register accesses
done in mog_init_rings() or macb_init_buffers(), but again these
functions are called without holding the spinlock in macb_hresp_error_task().
The locking seems fishy in this driver and it might deserve another look
before this patch is applied.
Fixes: 633e98a711ac0 ("net: macb: use resolved link config in mac_link_up()")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e194997 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88ada ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.
This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.
$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
reset MACB IP and disables PHY and network interface.
2. macb_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into suspend state. Some time later, system is
waken up by RTC wakeup device;
4. macb_resume: It does nothing because network interface has
been disabled;
5. macb_open: It is called to enable network interface again. ethernet
interface is initialized in this API but serdes which is power-off
by PMUFW during FPD-off suspend is not initialized again and so
we hit GT PLL lock issue on open.
To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.
Fixes: f22bd29ba19a ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes: 8b73fa3ae02b ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230727014944.3972546-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update macb's embedded PCS drivers to use neg_mode, even though it
makes no use of it or the "mode" argument. This makes the driver
consistent with converted drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Eo-00EaGX-KJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the receive partial store and forward mode is activated, the
receiver will only begin to forward the packet to the external AHB
or AXI slave when enough packet data is stored in the packet buffer.
The amount of packet data required to activate the forwarding process
is programmable via watermark registers which are located at the same
address as the partial store and forward enable bits. Adding support to
read this rx-watermark value from device-tree, to program the watermark
registers and enable partial store and forwarding.
Signed-off-by: Maulik Jodhani <maulik.jodhani@xilinx.com>
Signed-off-by: Pranavi Somisetty <pranavi.somisetty@amd.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On mpfs, with SRAM configured for 4 queues, setting max_tx_len
to GEM_TX_MAX_LEN=0x3f0 results multiple AMBA errors.
Setting max_tx_len to (4KiB - 56) removes those errors.
The details are described in erratum 1686 by Cadence
The max jumbo frame size is also reduced for mpfs to (4KiB - 56).
Signed-off-by: Daire McNamara <daire.mcnamara@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The seconds input from BD (6 bits) just needs to be ORed with the
upper bits from timer in this function. Avoid addition operation
every single time. Seconds rollover handling is left untouched.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Enable transmission and reception of PTP unicast packets by
updating PTP unicast config bit and setting current HW mac
address as allowed address in PTP unicast filter registers.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are currently two checks for PTP functionality - one on GEM
capability and another on the kernel config option. Combine them
into a single function as there's no use case where gem_has_ptp is
TRUE and MACB_USE_HWSTAMP is false.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Conflicts:
tools/testing/selftests/net/config
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.
Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:
[ 16.992082] ------------[ cut here ]------------
[ 16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
[ 17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
[ 17.018977] Modules linked in: xxxxx
[ 17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
[ 17.045345] Hardware name: xxxxx
[ 17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 17.054322] pc : check_unmap+0x6a0/0x900
[ 17.058243] lr : check_unmap+0x6a0/0x900
[ 17.062163] sp : ffffffc010003c40
[ 17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
[ 17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
[ 17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
[ 17.081407] x23: 0000000000000000 x22: ffffffc010a08750
[ 17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
[ 17.092032] x19: 0000000875e3e244 x18: 0000000000000010
[ 17.097343] x17: 0000000000000000 x16: 0000000000000000
[ 17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
[ 17.107959] x13: 0720072007200720 x12: 0720072007200720
[ 17.113261] x11: 0720072007200720 x10: 0720072007200720
[ 17.118565] x9 : 0720072007200720 x8 : 000000000000022d
[ 17.123869] x7 : 0000000000000015 x6 : 0000000000000098
[ 17.129173] x5 : 0000000000000000 x4 : 0000000000000000
[ 17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
[ 17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
[ 17.145082] Call trace:
[ 17.147524] check_unmap+0x6a0/0x900
[ 17.151091] debug_dma_unmap_page+0x88/0x90
[ 17.155266] gem_rx+0x114/0x2f0
[ 17.158396] macb_poll+0x58/0x100
[ 17.161705] net_rx_action+0x118/0x400
[ 17.165445] __do_softirq+0x138/0x36c
[ 17.169100] irq_exit+0x98/0xc0
[ 17.172234] __handle_domain_irq+0x64/0xc0
[ 17.176320] gic_handle_irq+0x5c/0xc0
[ 17.179974] el1_irq+0xb8/0x140
[ 17.183109] xiic_process+0x5c/0xe30
[ 17.186677] irq_thread_fn+0x28/0x90
[ 17.190244] irq_thread+0x208/0x2a0
[ 17.193724] kthread+0x130/0x140
[ 17.196945] ret_from_fork+0x10/0x20
[ 17.200510] ---[ end trace 7240980785f81d6f ]---
[ 237.021490] ------------[ cut here ]------------
[ 237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
[ 237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
[ 237.041802] Modules linked in: xxxxx
[ 237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 5.4.0 #28
[ 237.068941] Hardware name: xxxxx
[ 237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[ 237.077900] pc : add_dma_entry+0x214/0x240
[ 237.081986] lr : add_dma_entry+0x214/0x240
[ 237.086072] sp : ffffffc010003c30
[ 237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
[ 237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
[ 237.099987] x25: 0000000000000002 x24: 0000000000000000
[ 237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
[ 237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
[ 237.115897] x19: 00000000ffffffef x18: 0000000000000010
[ 237.121201] x17: 0000000000000000 x16: 0000000000000000
[ 237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
[ 237.131807] x13: 0720072007200720 x12: 0720072007200720
[ 237.137111] x11: 0720072007200720 x10: 0720072007200720
[ 237.142415] x9 : 0720072007200720 x8 : 0000000000000259
[ 237.147718] x7 : 0000000000000001 x6 : 0000000000000000
[ 237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001
[ 237.158325] x3 : 0000000000000006 x2 : 0000000000000007
[ 237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000
[ 237.168932] Call trace:
[ 237.171373] add_dma_entry+0x214/0x240
[ 237.175115] debug_dma_map_page+0xf8/0x120
[ 237.179203] gem_rx_refill+0x190/0x280
[ 237.182942] gem_rx+0x224/0x2f0
[ 237.186075] macb_poll+0x58/0x100
[ 237.189384] net_rx_action+0x118/0x400
[ 237.193125] __do_softirq+0x138/0x36c
[ 237.196780] irq_exit+0x98/0xc0
[ 237.199914] __handle_domain_irq+0x64/0xc0
[ 237.204000] gic_handle_irq+0x5c/0xc0
[ 237.207654] el1_irq+0xb8/0x140
[ 237.210789] arch_cpu_idle+0x40/0x200
[ 237.214444] default_idle_call+0x18/0x30
[ 237.218359] do_idle+0x200/0x280
[ 237.221578] cpu_startup_entry+0x20/0x30
[ 237.225493] rest_init+0xe4/0xf0
[ 237.228713] arch_call_rest_init+0xc/0x14
[ 237.232714] start_kernel+0x47c/0x4a8
[ 237.236367] ---[ end trace 7240980785f81d70 ]---
Lars was fast to find an explanation: according to the datasheet
bit 2 of the rx buffer descriptor entry has a different meaning in the
extended mode:
Address [2] of beginning of buffer, or
in extended buffer descriptor mode (DMA configuration register [28] = 1),
indicates a valid timestamp in the buffer descriptor entry.
The macb driver didn't mask this bit while getting an address and it
eventually caused a memory corruption and a dma failure.
The problem is resolved by explicitly clearing the problematic bit
if hw timestamping is used.
Fixes: 7b4296148066 ("net: macb: Add support for PTP timestamps in DMA descriptors")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reset TX when halt times out i.e. disable TX, clean up TX BDs,
interrupts (already done) and enable TX.
This addresses the issue observed when iperf is run at 10Mps Half
duplex where, after multiple collisions and retries, TX halts.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently macb sets clock divisor for pclk up to 160 MHz.
Function gem_mdc_clk_div was updated to enable divisor
for higher values of pclk.
Signed-off-by: Bartosz Wawrzyniak <bwawrzyn@cisco.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Increase halt timeout to accommodate for 16K SRAM at 10Mbps rounded.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20230316083050.2108-1-harini.katakam@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/wireless/nl80211.c
b27f07c50a73 ("wifi: nl80211: fix puncturing bitmap policy")
cbbaf2bb829b ("wifi: nl80211: add a command to enable/disable HW timestamping")
https://lore.kernel.org/all/20230314105421.3608efae@canb.auug.org.au
tools/testing/selftests/net/Makefile
62199e3f1658 ("selftests: net: Add VXLAN MDB test")
13715acf8ab5 ("selftest: Add test for bind() conflicts.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PTP capability to the Ethernet MAC.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add PTP capability to the Gigabit Ethernet MAC.
Signed-off-by: Durai Manickam KR <durai.manickamkr@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
