summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon
AgeCommit message (Collapse)Author
2025-05-21net: hibmcge: fix wrong ndo.open() after reset fail issue.Jijie Shao
If the driver reset fails, it may not work properly. Therefore, the ndo.open() operation should be rejected. In this patch, the driver calls netif_device_detach() before the reset and calls netif_device_attach() after the reset succeeds. If the reset fails, netif_device_attach() is not called. Therefore, netdev does not present and cannot be opened. If reset fails, only the PCI reset (via sysfs) can be used to attempt recovery. Fixes: 3f5a61f6d504 ("net: hibmcge: Add reset supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-21net: hibmcge: fix incorrect statistics update issueJijie Shao
When the user dumps statistics, the hibmcge driver automatically updates all statistics. If the driver is performing the reset operation, the error data of 0xFFFFFFFF is updated. Therefore, if the driver is resetting, the hbg_update_stats_by_info() needs to return directly. Fixes: c0bf9bf31e79 ("net: hibmcge: Add support for dump statistics") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: defer calling ptp_clock_register()Jian Shen
Currently the ptp_clock_register() is called before relative ptp resource ready. It may cause unexpected result when upper layer called the ptp API during the timewindow. Fix it by moving the ptp_clock_register() to the function end. Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250430093052.2400464-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: fixed debugfs tm_qset sizeHao Lan
The size of the tm_qset file of debugfs is limited to 64 KB, which is too small in the scenario with 1280 qsets. The size needs to be expanded to 1 MB. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250430093052.2400464-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: fix an interrupt residual problemYonglong Liu
When a VF is passthrough to a VM, and the VM is killed, the reported interrupt may not been handled, it will remain, and won't be clear by the nic engine even with a flr or tqp reset. When the VM restart, the interrupt of the first vector may be dropped by the second enable_irq in vfio, see the issue below: https://gitlab.com/qemu-project/qemu/-/issues/2884#note_2423361621 We notice that the vfio has always behaved this way, and the interrupt is a residue of the nic engine, so we fix the problem by moving the vector enable process out of the enable_irq loop. Fixes: 08a100689d4b ("net: hns3: re-organize vector handle") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250430093052.2400464-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-05-01net: hns3: store rx VLAN tag offload state for VFJian Shen
The VF driver missed to store the rx VLAN tag strip state when user change the rx VLAN tag offload state. And it will default to enable the rx vlan tag strip when re-init VF device after reset. So if user disable rx VLAN tag offload, and trig reset, then the HW will still strip the VLAN tag from packet nad fill into RX BD, but the VF driver will ignore it for rx VLAN tag offload disabled. It may cause the rx VLAN tag dropped. Fixes: b2641e2ad456 ("net: hns3: Add support of hardware rx-vlan-offload to HNS3 VF driver") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250430093052.2400464-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix multiple phy_stop() issueJijie Shao
After detecting the np_link_fail exception, the driver attempts to fix the exception by using phy_stop() and phy_start() in the scheduled task. However, hbg_fix_np_link_fail() and .ndo_stop() may be concurrently executed. As a result, phy_stop() is executed twice, and the following Calltrace occurs: hibmcge 0000:84:00.2 enp132s0f2: Link is Down hibmcge 0000:84:00.2: failed to link between MAC and PHY, try to fix... ------------[ cut here ]------------ called from state HALTED WARNING: CPU: 71 PID: 23391 at drivers/net/phy/phy.c:1503 phy_stop... ... pc : phy_stop+0x138/0x180 lr : phy_stop+0x138/0x180 sp : ffff8000c76bbd40 x29: ffff8000c76bbd40 x28: 0000000000000000 x27: 0000000000000000 x26: ffff2020047358c0 x25: ffff202004735940 x24: ffff20200000e405 x23: ffff2020060e5178 x22: ffff2020060e4000 x21: ffff2020060e49c0 x20: ffff2020060e5170 x19: ffff20202538e000 x18: 0000000000000020 x17: 0000000000000000 x16: ffffcede02e28f40 x15: ffffffffffffffff x14: 0000000000000000 x13: 205d313933333254 x12: 5b5d393430303233 x11: ffffcede04555958 x10: ffffcede04495918 x9 : ffffcede0274fee0 x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001 x5 : 00000000002bffa8 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff20202e429480 Call trace: phy_stop+0x138/0x180 hbg_fix_np_link_fail+0x4c/0x90 [hibmcge] hbg_service_task+0xfc/0x148 [hibmcge] process_one_work+0x180/0x398 worker_thread+0x210/0x328 kthread+0xe0/0xf0 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- This patch adds the rtnl_lock to hbg_fix_np_link_fail() to ensure that other operations are not performed concurrently. In addition, np_link_fail exception can be fixed only when the PHY is link. Fixes: e0306637e85d ("net: hibmcge: Add support for mac link exception handling feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix not restore rx pause mac addr after reset issueJijie Shao
The MAC hardware supports receiving two types of pause frames from link partner. One is a pause frame with a destination address of 01:80:C2:00:00:01. The other is a pause frame whose destination address is the address of the hibmcge driver. 01:80:C2:00:00:01 is supported by default. In .ndo_set_mac_address(), the hibmcge driver calls .hbg_hw_set_rx_pause_mac_addr() to set its mac address as the destination address of the rx puase frame. Therefore, pause frames with two types of MAC addresses can be received. Currently, the rx pause addr does not restored after reset. As a result, pause frames whose destination address is the hibmcge driver address cannot be correctly received. This patch restores the configuration by calling .hbg_hw_set_rx_pause_mac_addr() after reset is complete. Fixes: 3f5a61f6d504 ("net: hibmcge: Add reset supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix the incorrect np_link fail state issue.Jijie Shao
In the debugfs file, the driver displays the np_link fail state based on the HBG_NIC_STATE_NP_LINK_FAIL. However, HBG_NIC_STATE_NP_LINK_FAIL is cleared in hbg_service_task() So, this value of np_link fail is always false. This patch directly reads the related register to display the real state. Fixes: e0306637e85d ("net: hibmcge: Add support for mac link exception handling feature") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix wrong mtu log issueJijie Shao
A dbg log is generated when the driver modifies the MTU, which is expected to trace the change of the MTU. However, the log is recorded after WRITE_ONCE(). At this time, netdev->mtu has been changed to the new value. As a result, netdev->mtu is the same as new_mtu. This patch modifies the log location and records logs before WRITE_ONCE(). Fixes: ff4edac6e9bd ("net: hibmcge: Implement some .ndo functions") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix the share of irq statistics among different network ports ↵Jijie Shao
issue hbg_irqs is a global array which contains irq statistics. However, the irq statistics of different network ports point to the same global array. As a result, the statistics are incorrect. This patch allocates a statistics array for each network port to prevent the statistics of different network ports from affecting each other. irq statistics are removed from hbg_irq_info. Therefore, all data in hbg_irq_info remains unchanged. Therefore, the input parameter of some functions is changed to const. Fixes: 4d089035fa19 ("net: hibmcge: Add interrupt supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix incorrect multicast filtering issueJijie Shao
The driver does not support multicast filtering, the mask must be set to 0xFFFFFFFF. Otherwise, incorrect filtering occurs. This patch fixes this problem. Fixes: 37b367d60d0f ("net: hibmcge: Add unicast frame filter supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-11net: hibmcge: fix incorrect pause frame statistics issueJijie Shao
The driver supports pause frames, but does not pass pause frames based on rx pause enable configuration, resulting in incorrect pause frame statistics. like this: mz eno3 '01 80 c2 00 00 01 00 18 2d 04 00 9c 88 08 00 01 ff ff' \ -p 64 -c 100 ethtool -S enp132s0f2 | grep -v ": 0" NIC statistics: rx_octets_total_filt_cnt: 6800 rx_filt_pkt_cnt: 100 The rx pause frames are filtered by the MAC hardware. This patch configures pass pause frames based on the rx puase enable status to ensure that rx pause frames are not filtered. mz eno3 '01 80 c2 00 00 01 00 18 2d 04 00 9c 88 08 00 01 ff ff' \ -p 64 -c 100 ethtool --include-statistics -a enp132s0f2 Pause parameters for enp132s0f2: Autonegotiate: on RX: on TX: on RX negotiated: on TX negotiated: on Statistics: tx_pause_frames: 0 rx_pause_frames: 100 Fixes: 3a03763f3876 ("net: hibmcge: Add pauseparam supported in this module") Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250410021327.590362-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-03-26Merge tag 'net-next-6.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Continue Netlink conversions to per-namespace RTNL lock (IPv4 routing, routing rules, routing next hops, ARP ioctls) - Continue extending the use of netdev instance locks. As a driver opt-in protect queue operations and (in due course) ethtool operations with the instance lock and not RTNL lock. - Support collecting TCP timestamps (data submitted, sent, acked) in BPF, allowing for transparent (to the application) and lower overhead tracking of TCP RPC performance. - Tweak existing networking Rx zero-copy infra to support zero-copy Rx via io_uring. - Optimize MPTCP performance in single subflow mode by 29%. - Enable GRO on packets which went thru XDP CPU redirect (were queued for processing on a different CPU). Improving TCP stream performance up to 2x. - Improve performance of contended connect() by 200% by searching for an available 4-tuple under RCU rather than a spin lock. Bring an additional 229% improvement by tweaking hash distribution. - Avoid unconditionally touching sk_tsflags on RX, improving performance under UDP flood by as much as 10%. - Avoid skb_clone() dance in ping_rcv() to improve performance under ping flood. - Avoid FIB lookup in netfilter if socket is available, 20% perf win. - Rework network device creation (in-kernel) API to more clearly identify network namespaces and their roles. There are up to 4 namespace roles but we used to have just 2 netns pointer arguments, interpreted differently based on context. - Use sysfs_break_active_protection() instead of trylock to avoid deadlocks between unregistering objects and sysfs access. - Add a new sysctl and sockopt for capping max retransmit timeout in TCP. - Support masking port and DSCP in routing rule matches. - Support dumping IPv4 multicast addresses with RTM_GETMULTICAST. - Support specifying at what time packet should be sent on AF_XDP sockets. - Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users. - Add Netlink YAML spec for WiFi (nl80211) and conntrack. - Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols which only need to be exported when IPv6 support is built as a module. - Age FDB entries based on Rx not Tx traffic in VxLAN, similar to normal bridging. - Allow users to specify source port range for GENEVE tunnels. - netconsole: allow attaching kernel release, CPU ID and task name to messages as metadata Driver API: - Continue rework / fixing of Energy Efficient Ethernet (EEE) across the SW layers. Delegate the responsibilities to phylink where possible. Improve its handling in phylib. - Support symmetric OR-XOR RSS hashing algorithm. - Support tracking and preserving IRQ affinity by NAPI itself. - Support loopback mode speed selection for interface selftests. Device drivers: - Remove the IBM LCS driver for s390 - Remove the sb1000 cable modem driver - Add support for SFP module access over SMBus - Add MCTP transport driver for MCTP-over-USB - Enable XDP metadata support in multiple drivers - Ethernet high-speed NICs: - Broadcom (bnxt): - add PCIe TLP Processing Hints (TPH) support for new AMD platforms - support dumping RoCE queue state for debug - opt into instance locking - Intel (100G, ice, idpf): - ice: rework MSI-X IRQ management and distribution - ice: support for E830 devices - iavf: add support for Rx timestamping - iavf: opt into instance locking - nVidia/Mellanox: - mlx4: use page pool memory allocator for Rx - mlx5: support for one PTP device per hardware clock - mlx5: support for 200Gbps per-lane link modes - mlx5: move IPSec policy check after decryption - AMD/Solarflare: - support FW flashing via devlink - Cisco (enic): - use page pool memory allocator for Rx - enable 32, 64 byte CQEs - get max rx/tx ring size from the device - Meta (fbnic): - support flow steering and RSS configuration - report queue stats - support TCP segmentation - support IRQ coalescing - support ring size configuration - Marvell/Cavium: - support AF_XDP - Wangxun: - support for PTP clock and timestamping - Huawei (hibmcge): - checksum offload - add more statistics - Ethernet virtual: - VirtIO net: - aggressively suppress Tx completions, improve perf by 96% with 1 CPU and 55% with 2 CPUs - expose NAPI to IRQ mapping and persist NAPI settings - Google (gve): - support XDP in DQO RDA Queue Format - opt into instance locking - Microsoft vNIC: - support BIG TCP - Ethernet NICs consumer, and embedded: - Synopsys (stmmac): - cleanup Tx and Tx clock setting and other link-focused cleanups - enable SGMII and 2500BASEX mode switching for Intel platforms - support Sophgo SG2044 - Broadcom switches (b53): - support for BCM53101 - TI: - iep: add perout configuration support - icssg: support XDP - Cadence (macb): - implement BQL - Xilinx (axinet): - support dynamic IRQ moderation and changing coalescing at runtime - implement BQL - report standard stats - MediaTek: - support phylink managed EEE - Intel: - igc: don't restart the interface on every XDP program change - RealTek (r8169): - support reading registers of internal PHYs directly - increase max jumbo packet size on RTL8125/RTL8126 - Airoha: - support for RISC-V NPU packet processing unit - enable scatter-gather and support MTU up to 9kB - Tehuti (tn40xx): - support cards with TN4010 MAC and an Aquantia AQR105 PHY - Ethernet PHYs: - support for TJA1102S, TJA1121 - dp83tg720: add randomized polling intervals for link detection - dp83822: support changing the transmit amplitude voltage - support for LEDs on 88q2xxx - CAN: - canxl: support Remote Request Substitution bit access - flexcan: add S32G2/S32G3 SoC - WiFi: - remove cooked monitor support - strict mode for better AP testing - basic EPCS support - OMI RX bandwidth reduction support - batman-adv: add support for jumbo frames - WiFi drivers: - RealTek (rtw88): - support RTL8814AE and RTL8814AU - RealTek (rtw89): - switch using wiphy_lock and wiphy_work - add BB context to manipulate two PHY as preparation of MLO - improve BT-coexistence mechanism to play A2DP smoothly - Intel (iwlwifi): - add new iwlmld sub-driver for latest HW/FW combinations - MediaTek (mt76): - preparation for mt7996 Multi-Link Operation (MLO) support - Qualcomm/Atheros (ath12k): - continued work on MLO - Silabs (wfx): - Wake-on-WLAN support - Bluetooth: - add support for skb TX SND/COMPLETION timestamping - hci_core: enable buffer flow control for SCO/eSCO - coredump: log devcd dumps into the monitor - Bluetooth drivers: - intel: add support to configure TX power - nxp: handle bootloader error during cmd5 and cmd7" * tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits) unix: fix up for "apparmor: add fine grained af_unix mediation" mctp: Fix incorrect tx flow invalidation condition in mctp-i2c net: usb: asix: ax88772: Increase phy_name size net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string net: libwx: fix Tx L4 checksum net: libwx: fix Tx descriptor content for some tunnel packets atm: Fix NULL pointer dereference net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus net: phy: aquantia: add essential functions to aqr105 driver net: phy: aquantia: search for firmware-name in fwnode net: phy: aquantia: add probe function to aqr105 for firmware loading net: phy: Add swnode support to mdiobus_scan gve: add XDP DROP and PASS support for DQ gve: update XDP allocation path support RX buffer posting gve: merge packet buffer size fields gve: update GQ RX to use buf_size gve: introduce config-based allocation for XDP gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics ...
2025-03-25Merge tag 'timers-cleanups-2025-03-23' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer cleanups from Thomas Gleixner: "A treewide hrtimer timer cleanup hrtimers are initialized with hrtimer_init() and a subsequent store to the callback pointer. This turned out to be suboptimal for the upcoming Rust integration and is obviously a silly implementation to begin with. This cleanup replaces the hrtimer_init(T); T->function = cb; sequence with hrtimer_setup(T, cb); The conversion was done with Coccinelle and a few manual fixups. Once the conversion has completely landed in mainline, hrtimer_init() will be removed and the hrtimer::function becomes a private member" * tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits) wifi: rt2x00: Switch to use hrtimer_update_function() io_uring: Use helper function hrtimer_update_function() serial: xilinx_uartps: Use helper function hrtimer_update_function() ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup() RDMA: Switch to use hrtimer_setup() virtio: mem: Switch to use hrtimer_setup() drm/vmwgfx: Switch to use hrtimer_setup() drm/xe/oa: Switch to use hrtimer_setup() drm/vkms: Switch to use hrtimer_setup() drm/msm: Switch to use hrtimer_setup() drm/i915/request: Switch to use hrtimer_setup() drm/i915/uncore: Switch to use hrtimer_setup() drm/i915/pmu: Switch to use hrtimer_setup() drm/i915/perf: Switch to use hrtimer_setup() drm/i915/gvt: Switch to use hrtimer_setup() drm/i915/huc: Switch to use hrtimer_setup() drm/amdgpu: Switch to use hrtimer_setup() stm class: heartbeat: Switch to use hrtimer_setup() i2c: Switch to use hrtimer_setup() iio: Switch to use hrtimer_setup() ...
2025-03-20net: phy: Support speed selection for PHY loopbackGerhard Engleder
phy_loopback() leaves it to the PHY driver to select the speed of the loopback mode. Thus, the speed of the loopback mode depends on the PHY driver in use. Add support for speed selection to phy_loopback() to enable loopback with defined speeds. Ensure that link up is signaled if speed changes as speed is not allowed to change during link up. Link down and up is necessary for a new speed. Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-13net: hns3: use string choices helperJian Shen
Use string choices helper for better readability. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250307113733.819448-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.14-rc6). Conflicts: net/ethtool/cabletest.c 2bcf4772e45a ("net: ethtool: try to protect all callback with netdev instance lock") 637399bf7e77 ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device") No Adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-04net: hibmcge: Add support for ioctlJijie Shao
This patch implements the .ndo_eth_ioctl() to read and write the PHY register. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hibmcge: Add support for BMC diagnose featureJijie Shao
The MAC hardware is on the BMC side, and the driver is on the host side. When the driver is abnormal, the BMC cannot directly detect the exception cause. Therefore, this patch implements the BMC diagnosis feature. When users query driver diagnosis information on the BMC, the driver detects the query request in the scheduled task and reports driver statistics and link status to the BMC through the bar space. The BMC collects logs to analyze exception causes. Currently, the scheduled task is executed every 30 seconds To quickly respond to user query requests, this patch changes the scheduled task to once every second. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hibmcge: Add support for mac link exception handling featureJijie Shao
If the rate changed frequently, the PHY link ok, but the MAC link maybe fails. As a result, the network port is unavailable. According to the documents of the chip, core_reset needs to do to fix the fault. In hw_adjus_link(), the core_reset is added to try to ensure that MAC link status is normal. In addition, MAC link failure detection is added. If the MAC link fails after core_reset, driver invokes the phy_stop() and phy_start() to re-link. Due to phydev->lock, re-link cannot be triggered in adjust_link(). Therefore, this operation is invoked in a scheduled task. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hibmcge: Add support for abnormal irq handling featureJijie Shao
the hardware error was reported by interrupt, and need be fixed by doing function reset, but the whole reset flow takes a long time, should not do it in irq handler, so do it in scheduled task. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hibmcge: Add support for checksum offloadJijie Shao
This patch implements the rx checksum offload feature. The tx checksum offload processing in .ndo_start_xmit() has been accepted. This patch also adds the tx checksum feature, including NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hibmcge: Add support for dump statisticsJijie Shao
The driver supports many hw statistics. This patch supports dump statistics through ethtool_ops and ndo.get_stats64(). The type of hw statistics register is u32, To prevent the statistics register from overflowing, the driver dump the statistics every 30 seconds. in a scheduled task. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-04net: hns3: make sure ptp clock is unregister and freed if ↵Peiyang Wang
hclge_ptp_get_cycle returns an error During the initialization of ptp, hclge_ptp_get_cycle might return an error and returned directly without unregister clock and free it. To avoid that, call hclge_ptp_destroy_clock to unregist and free clock if hclge_ptp_get_cycle failed. Fixes: 8373cd38a888 ("net: hns3: change the method of obtaining default ptp cycle") Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250228105258.1243461-1-shaojijie@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-27net: hisilicon: hns_mdio: remove incorrect ACPI_PTR annotationArnd Bergmann
Building with W=1 shows a warning about hns_mdio_acpi_match being unused when CONFIG_ACPI is disabled: drivers/net/ethernet/hisilicon/hns_mdio.c:631:36: error: unused variable 'hns_mdio_acpi_match' [-Werror,-Wunused-const-variable] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://patch.msgid.link/20250225163341.4168238-1-arnd@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-18net: ethernet: hisilicon: Switch to use hrtimer_setup()Nam Cao
hrtimer_setup() takes the callback function pointer as argument and initializes the timer completely. Replace hrtimer_init() and the open coded initialization of hrtimer::function with the new setup mechanism. Patch was created by using Coccinelle. Signed-off-by: Nam Cao <namcao@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/11f5140e157cc0cd02a715f531217b021743aa71.1738746872.git.namcao@linutronix.de
2025-01-22net: hns3: fix oops when unload drivers parallelingJian Shen
When unload hclge driver, it tries to disable sriov first for each ae_dev node from hnae3_ae_dev_list. If user unloads hns3 driver at the time, because it removes all the ae_dev nodes, and it may cause oops. But we can't simply use hnae3_common_lock for this. Because in the process flow of pci_disable_sriov(), it will trigger the remove flow of VF, which will also take hnae3_common_lock. To fixes it, introduce a new mutex to protect the unload process. Fixes: 0dd8a25f355b ("net: hns3: disable sriov before unload hclge layer") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250118094741.3046663-1-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc7). Conflicts: a42d71e322a8 ("net_sched: sch_cake: Add drop reasons") 737d4d91d35b ("sched: sch_cake: add bounds checks to host bulk flow fairness counts") Adjacent changes: drivers/net/ethernet/meta/fbnic/fbnic.h 3a856ab34726 ("eth: fbnic: add IRQ reuse support") 95978931d55f ("eth: fbnic: Revert "eth: fbnic: Add hardware monitoring support via HWMON interface"") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fix kernel crash when 1588 is sent on HIP08 devicesJie Wang
Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180 Fixes: 0bf5eb788512 ("net: hns3: add support for PTP") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fixed hclge_fetch_pf_reg accesses bar space out of bounds issueHao Lan
The TQP BAR space is divided into two segments. TQPs 0-1023 and TQPs 1024-1279 are in different BAR space addresses. However, hclge_fetch_pf_reg does not distinguish the tqp space information when reading the tqp space information. When the number of TQPs is greater than 1024, access bar space overwriting occurs. The problem of different segments has been considered during the initialization of tqp.io_base. Therefore, tqp.io_base is directly used when the queue is read in hclge_fetch_pf_reg. The error message: Unable to handle kernel paging request at virtual address ffff800037200000 pc : hclge_fetch_pf_reg+0x138/0x250 [hclge] lr : hclge_get_regs+0x84/0x1d0 [hclge] Call trace: hclge_fetch_pf_reg+0x138/0x250 [hclge] hclge_get_regs+0x84/0x1d0 [hclge] hns3_get_regs+0x2c/0x50 [hns3] ethtool_get_regs+0xf4/0x270 dev_ethtool+0x674/0x8a0 dev_ioctl+0x270/0x36c sock_do_ioctl+0x110/0x2a0 sock_ioctl+0x2ac/0x530 __arm64_sys_ioctl+0xa8/0x100 invoke_syscall+0x4c/0x124 el0_svc_common.constprop.0+0x140/0x15c do_el0_svc+0x30/0xd0 el0_svc+0x1c/0x2c el0_sync_handler+0xb0/0xb4 el0_sync+0x168/0x180 Fixes: 939ccd107ffc ("net: hns3: move dump regs function to a separate file") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: initialize reset_timer before hclgevf_misc_irq_init()Jian Shen
Currently the misc irq is initialized before reset_timer setup. But it will access the reset_timer in the irq handler. So initialize the reset_timer earlier. Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: don't auto enable misc vectorJian Shen
Currently, there is a time window between misc irq enabled and service task inited. If an interrupte is reported at this time, it will cause warning like below: [ 16.324639] Call trace: [ 16.324641] __queue_delayed_work+0xb8/0xe0 [ 16.324643] mod_delayed_work_on+0x78/0xd0 [ 16.324655] hclge_errhand_task_schedule+0x58/0x90 [hclge] [ 16.324662] hclge_misc_irq_handle+0x168/0x240 [hclge] [ 16.324666] __handle_irq_event_percpu+0x64/0x1e0 [ 16.324667] handle_irq_event+0x80/0x170 [ 16.324670] handle_fasteoi_edge_irq+0x110/0x2bc [ 16.324671] __handle_domain_irq+0x84/0xfc [ 16.324673] gic_handle_irq+0x88/0x2c0 [ 16.324674] el1_irq+0xb8/0x140 [ 16.324677] arch_cpu_idle+0x18/0x40 [ 16.324679] default_idle_call+0x5c/0x1bc [ 16.324682] cpuidle_idle_call+0x18c/0x1c4 [ 16.324684] do_idle+0x174/0x17c [ 16.324685] cpu_startup_entry+0x30/0x6c [ 16.324687] secondary_start_kernel+0x1a4/0x280 [ 16.324688] ---[ end trace 6aa0bff672a964aa ]--- So don't auto enable misc vector when request irq.. Fixes: 7be1b9f3e99f ("net: hns3: make hclge_service use delayed workqueue") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: Resolved the issue that the debugfs query result is inconsistent.Hao Lan
This patch modifies the implementation of debugfs: When the user process stops unexpectedly, not all data of the file system is read. In this case, the save_buf pointer is not released. When the user process is called next time, save_buf is used to copy the cached data to the user space. As a result, the queried data is stale. To solve this problem, this patch implements .open() and .release() handler for debugfs file_operations. moving allocation buffer and execution of the cmd to the .open() handler and freeing in to the .release() handler. Allocate separate buffer for each reader and associate the buffer with the file pointer. When different user read processes no longer share the buffer, the stale data problem is fixed. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangwei Zhang <zhangwangwei6@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fix missing features due to dev->features configuration too earlyHao Lan
Currently, the netdev->features is configured in hns3_nic_set_features. As a result, __netdev_update_features considers that there is no feature difference, and the procedures of the real features are missing. Fixes: 2a7556bb2b73 ("net: hns3: implement ndo_features_check ops for hns3 driver") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20250106143642.539698-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-01-08net: hns3: fixed reset failure issues caused by the incorrect reset typeHao Lan
When a reset type that is not supported by the driver is input, a reset pending flag bit of the HNAE3_NONE_RESET type is generated in reset_pending. The driver does not have a mechanism to clear this type of error. As a result, the driver considers that the reset is not complete. This patch provides a mechanism to clear the HNAE3_NONE_RESET flag and the parameter of hnae3_ae_ops.set_default_reset_request is verified. The error message: hns3 0000:39:01.0: cmd failed -16 hns3 0000:39:01.0: hclge device re-init failed, VF is disabled! hns3 0000:39:01.0: failed to reset VF stack hns3 0000:39:01.0: failed to reset VF(4) hns3 0000:39:01.0: prepare reset(2) wait done hns3 0000:39:01.0 eth4: already uninitialized Use the crash tool to view struct hclgevf_dev: struct hclgevf_dev { ... default_reset_request = 0x20, reset_level = HNAE3_NONE_RESET, reset_pending = 0x100, reset_type = HNAE3_NONE_RESET, ... }; Fixes: 720bd5837e37 ("net: hns3: add set_default_reset_request in the hnae3_ae_ops") Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20250106143642.539698-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove unused enumsDr. David Alan Gilbert
The enums dsaf_roce_port_mode, dsaf_roce_port_num and dsaf_roce_qos_sl are unused after the removal of the reset code. Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-5-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove reset helpersDr. David Alan Gilbert
With hns_dsaf_roce_reset() removed in a previous patch, the two helper member pointers, 'hns_dsaf_roce_srst', and 'hns_dsaf_srst_chns' are now unread. Remove them, and the helper functions that they were initialised to, that is hns_dsaf_srst_chns(), hns_dsaf_srst_chns_acpi(), hns_dsaf_roce_srst() and hns_dsaf_roce_srst_acpi(). Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-4-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove unused hns_rcb_startDr. David Alan Gilbert
hns_rcb_start() has been unused since 2016's commit 454784d85de3 ("net: hns: delete redundancy ring enable operations") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-3-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20net: hisilicon: hns: Remove unused hns_dsaf_roce_resetDr. David Alan Gilbert
hns_dsaf_roce_reset() has been unused since 2021's commit 38d220882426 ("RDMA/hns: Remove support for HIP06") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Jijie Shao<shaojijie@huawei.com> Link: https://patch.msgid.link/20241218163341.40297-2-linux@treblig.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: hibmcge: Add nway_reset supported in this moduleJijie Shao
Add nway_reset supported in this module Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241216040532.1566229-8-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: hibmcge: Add reset supported in this moduleJijie Shao
Sometimes, if the port doesn't work, we can try to fix it by resetting it. This patch supports reset triggered by ethtool or FLR of PCIe, For example: ethtool --reset eth0 dedicated echo 1 > /sys/bus/pci/devices/0000\:83\:00.1/reset We hope that the reset can be performed only when the port is down, and the port cannot be up during the reset. Therefore, the entire reset process is protected by the rtnl lock. After the reset is complete, the hardware registers are restored to their default values. Therefore, some rebuild operations are required to rewrite the user configuration to the registers. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241216040532.1566229-7-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: hibmcge: Add pauseparam supported in this moduleJijie Shao
The MAC can automatically send or respond to pause frames. This patch supports the function of enabling pause frames by using ethtool. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241216040532.1566229-6-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: hibmcge: Add register dump supported in this moduleJijie Shao
The dump register is an effective way to analyze problems. To ensure code flexibility, each register contains the type, offset, and value information. The ethtool does the pretty print based on these information. The driver can dynamically add or delete registers that need to be dumped in the future because information such as type and offset is contained. ethtool always can do pretty print. With the ethtool of a specific version, the following effects are achieved: [root@localhost sjj]# ./ethtool -d enp131s0f1 [SPEC] VALID [0x0000]: 0x00000001 [SPEC] EVENT_REQ [0x0004]: 0x00000000 [SPEC] MAC_ID [0x0008]: 0x00000002 [SPEC] PHY_ADDR [0x000c]: 0x00000002 [SPEC] MAC_ADDR_L [0x0010]: 0x00000808 [SPEC] MAC_ADDR_H [0x0014]: 0x08080802 [SPEC] UC_MAX_NUM [0x0018]: 0x00000004 [SPEC] MAX_MTU [0x0028]: 0x00000fc2 [SPEC] MIN_MTU [0x002c]: 0x00000100 [SPEC] TX_FIFO_NUM [0x0030]: 0x00000040 [SPEC] RX_FIFO_NUM [0x0034]: 0x0000007f [SPEC] VLAN_LAYERS [0x0038]: 0x00000002 [MDIO] COMMAND_REG [0x0000]: 0x0000185f [MDIO] ADDR_REG [0x0004]: 0x00000000 [MDIO] WDATA_REG [0x0008]: 0x0000a000 [MDIO] RDATA_REG [0x000c]: 0x00000000 [MDIO] STA_REG [0x0010]: 0x00000000 [GMAC] DUPLEX_TYPE [0x0008]: 0x00000001 [GMAC] FD_FC_TYPE [0x000c]: 0x00008808 [GMAC] FC_TX_TIMER [0x001c]: 0x000000ff [GMAC] FD_FC_ADDR_LOW [0x0020]: 0xc2000001 [GMAC] FD_FC_ADDR_HIGH [0x0024]: 0x00000180 [GMAC] MAX_FRM_SIZE [0x003c]: 0x000005f6 [GMAC] PORT_MODE [0x0040]: 0x00000002 [GMAC] PORT_EN [0x0044]: 0x00000006 ... Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241216040532.1566229-5-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: hibmcge: Add unicast frame filter supported in this moduleJijie Shao
MAC supports filtering unmatched unicast packets according to the MAC address table. This patch adds the support for unicast frame filtering. To support automatic restoration of MAC entries after reset, the driver saves a copy of MAC entries in the driver. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Link: https://patch.msgid.link/20241216040532.1566229-4-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: hibmcge: Add irq_info file to debugfsJijie Shao
the driver requested three interrupts: "tx", "rx", "err". The err interrupt is a summary interrupt. We distinguish different errors based on the status register and mask. With "cat /proc/interrupts | grep hibmcge", we can't distinguish the detailed cause of the error, so we added this file to debugfs. the following effects are achieved: [root@localhost sjj]# cat /sys/kernel/debug/hibmcge/0000\:83\:00.1/irq_info RX : enabled: true , logged: false, count: 0 TX : enabled: true , logged: false, count: 0 MAC_MII_FIFO_ERR : enabled: false, logged: true , count: 0 MAC_PCS_RX_FIFO_ERR : enabled: false, logged: true , count: 0 MAC_PCS_TX_FIFO_ERR : enabled: false, logged: true , count: 0 MAC_APP_RX_FIFO_ERR : enabled: false, logged: true , count: 0 MAC_APP_TX_FIFO_ERR : enabled: false, logged: true , count: 0 SRAM_PARITY_ERR : enabled: true , logged: true , count: 0 TX_AHB_ERR : enabled: true , logged: true , count: 0 RX_BUF_AVL : enabled: true , logged: false, count: 0 REL_BUF_ERR : enabled: true , logged: true , count: 0 TXCFG_AVL : enabled: true , logged: false, count: 0 TX_DROP : enabled: true , logged: false, count: 0 RX_DROP : enabled: true , logged: false, count: 0 RX_AHB_ERR : enabled: true , logged: true , count: 0 MAC_FIFO_ERR : enabled: true , logged: false, count: 0 RBREQ_ERR : enabled: true , logged: false, count: 0 WE_ERR : enabled: true , logged: false, count: 0 The irq framework of hibmcge driver also includes tx/rx interrupts. Therefore, TX and RX are not moved separately form this file. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241216040532.1566229-3-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-17net: hibmcge: Add debugfs supported in this moduleJijie Shao
This patch initializes debugfs and creates root directory for each device. The tx_ring and rx_ring debugfs files are implemented together. Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241216040532.1566229-2-shaojijie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.12-rc7). Conflicts: drivers/net/ethernet/freescale/enetc/enetc_pf.c e15c5506dd39 ("net: enetc: allocate vf_state during PF probes") 3774409fd4c6 ("net: enetc: build enetc_pf_common.c as a separate module") https://lore.kernel.org/20241105114100.118bd35e@canb.auug.org.au Adjacent changes: drivers/net/ethernet/ti/am65-cpsw-nuss.c de794169cf17 ("net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7") 4a7b2ba94a59 ("net: ethernet: ti: am65-cpsw: Use tstats instead of open coded version") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-06net: hisilicon: hns3: use ethtool string helpersRosen Penev
The latter is the preferred way to copy ethtool strings. Avoids manually incrementing the pointer. Cleans up the code quite well. Signed-off-by: Rosen Penev <rosenp@gmail.com> Reviewed-by: Jijie Shao <shaojijie@huawei.com> Tested-by: Jijie Shao <shaojijie@huawei.com> Link: https://patch.msgid.link/20241104204823.297277-1-rosenp@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-07-12 06:01:55 +0000