summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe
AgeCommit message (Collapse)Author
2022-06-10Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2022-06-09 Maximilian Heyne adds reporting of VF statistics on ixgbe via iproute2 interface. Kai-Heng Feng removes duplicate defines from igb. Jiaqing Zhao fixes typos in e1000, ixgb, and ixgbe drivers. Julia Lawall fixes typos for fm10k, ixgbe, and ice drivers. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: drivers/net/ethernet/intel: fix typos in comments ixgbe: Fix typos in comments ixgb: Fix typos in comments e1000: Fix typos in comments igb: Remove duplicate defines drivers, ixgbe: export vf statistics ==================== Link: https://lore.kernel.org/r/20220609171257.2727150-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-09drivers/net/ethernet/intel: fix typos in commentsJulia Lawall
Spelling mistakes (triple letters) in comments. Detected with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09ixgbe: Fix typos in commentsJiaqing Zhao
"VLAN filter" was misspelled as "VLAN filer" in some comments. Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-09drivers, ixgbe: export vf statisticsMaximilian Heyne
This change retrieves network metrics for virtual functions from the device and exports them via the iproute2 interface. The code for retrieving the statistics from the device is taken from the out-of-tree driver. The feature was introduced with version 2.0.75.7, so the diff between this version and the previous version 2.0.72.4 was used to identify required changes. The export via ethtool is omitted in favor of using the standard ndo_get_vf_stats interface. Per-VF statistics can now be printed, for instance, via ip --statistics link show dev eth0 Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07ixgbe: fix unexpected VLAN Rx in promisc mode on VFOlivier Matz
When the promiscuous mode is enabled on a VF, the IXGBE_VMOLR_VPE bit (VLAN Promiscuous Enable) is set. This means that the VF will receive packets whose VLAN is not the same than the VLAN of the VF. For instance, in this situation: ┌────────┐ ┌────────┐ ┌────────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ VF0├────┤VF1 VF2├────┤VF3 │ │ │ │ │ │ │ └────────┘ └────────┘ └────────┘ VM1 VM2 VM3 vf 0: vlan 1000 vf 1: vlan 1000 vf 2: vlan 1001 vf 3: vlan 1001 If we tcpdump on VF3, we see all the packets, even those transmitted on vlan 1000. This behavior prevents to bridge VF1 and VF2 in VM2, because it will create a loop: packets transmitted on VF1 will be received by VF2 and vice-versa, and bridged again through the software bridge. This patch remove the activation of VLAN Promiscuous when a VF enables the promiscuous mode. However, the IXGBE_VMOLR_UPE bit (Unicast Promiscuous) is kept, so that a VF receives all packets that has the same VLAN, whatever the destination MAC address. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-06-07ixgbe: fix bcast packets Rx on VF after promisc removalOlivier Matz
After a VF requested to remove the promiscuous flag on an interface, the broadcast packets are not received anymore. This breaks some protocols like ARP. In ixgbe_update_vf_xcast_mode(), we should keep the IXGBE_VMOLR_BAM bit (Broadcast Accept) on promiscuous removal. This flag is already set by default in ixgbe_set_vmolr() on VF reset. Fixes: 8443c1a4b192 ("ixgbe, ixgbevf: Add new mbox API xcast mode") Cc: stable@vger.kernel.org Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Olivier Matz <olivier.matz@6wind.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-05-13ixgbe: add xdp frags support to ndo_xdp_xmitLorenzo Bianconi
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220512212621.3746140-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-13Merge branch 'master' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-05-13 1) Cleanups for the code behind the XFRM offload API. This is a preparation for the extension of the API for policy offload. From Leon Romanovsky. * 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: drop not needed flags variable in XFRM offload struct net/mlx5e: Use XFRM state direction instead of flags netdevsim: rely on XFRM state direction instead of flags ixgbe: propagate XFRM offload state direction instead of flags xfrm: store and rely on direction to construct offload flags xfrm: rename xfrm_state_offload struct to allow reuse xfrm: delete not used number of external headers xfrm: free not used XFRM_ESP_NO_TRAILER flag ==================== Link: https://lore.kernel.org/r/20220513151218.4010119-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06Merge branch '10GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 10GbE Intel Wired LAN Driver Updates 2022-05-05 This series contains updates to ixgbe and igb drivers. Jeff Daly adjusts type for 'allow_unsupported_sfp' to match the associated struct value for ixgbe. Alaa Mohamed converts, deprecated, kmap() call to kmap_local_page() for igb. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igb: Convert kmap() to kmap_local_page() ixgbe: Fix module_param allow_unsupported_sfp type ==================== Link: https://lore.kernel.org/r/20220505155651.2606195-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-06ixgbe: propagate XFRM offload state direction instead of flagsLeon Romanovsky
Convert the ixgbe driver to rely on XFRM offload state direction instead of flags bits that were not checked at all. Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-05-05ixgbe: Fix module_param allow_unsupported_sfp typeJeff Daly
The module_param allow_unsupported_sfp should be a boolean to match the type in the ixgbe_hw struct. Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-04-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/linux/netdevice.h net/core/dev.c 6510ea973d8d ("net: Use this_cpu_inc() to increment net->core_stats") 794c24e9921f ("net-core: rx_otherhost_dropped to core_stats") https://lore.kernel.org/all/20220428111903.5f4304e0@canb.auug.org.au/ drivers/net/wan/cosa.c d48fea8401cf ("net: cosa: fix error check return value of register_chrdev()") 89fbca3307d4 ("net: wan: remove support for COSA and SRP synchronous serial boards") https://lore.kernel.org/all/20220428112130.1f689e5e@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-28ixgbe: ensure IPsec VF<->PF compatibilityLeon Romanovsky
The VF driver can forward any IPsec flags and such makes the function is not extendable and prone to backward/forward incompatibility. If new software runs on VF, it won't know that PF configured something completely different as it "knows" only XFRM_OFFLOAD_INBOUND flag. Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Shannon Nelson <snelson@pensando.io> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220427173152.443102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-21ixgbe, xsk: Get rid of redundant 'fallthrough'Maciej Fijalkowski
Intel drivers translate actions returned from XDP programs to their own return codes that have the following mapping: XDP_REDIRECT -> IXGBE_XDP_{REDIR,CONSUMED} XDP_TX -> IXGBE_XDP_{TX,CONSUMED} XDP_DROP -> IXGBE_XDP_CONSUMED XDP_ABORTED -> IXGBE_XDP_CONSUMED XDP_PASS -> IXGBE_XDP_PASS Commit c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") introduced new translation XDP_REDIRECT -> IXGBE_XDP_EXIT which is set when XSK RQ gets full and to indicate that driver should stop further Rx processing. This happens for unsuccessful xdp_do_redirect() so it is valuable to call trace_xdp_exception() for this case. In order to avoid IXGBE_XDP_EXIT -> IXGBE_XDP_CONSUMED overwrite, XDP_DROP case was moved above which in turn made the 'fallthrough' that is in XDP_ABORTED useless as it became the last label in the switch statement. Simply drop this leftover. Fixes: c7dd09fd4628 ("ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets full") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220421132126.471515-2-maciej.fijalkowski@intel.com
2022-04-15ixgbe, xsk: Diversify return values from xsk_wakeup call pathsMaciej Fijalkowski
Currently, when debugging AF_XDP workloads, one can correlate the -ENXIO return code as the case that XSK is not in the bound state. Returning same code from ndo_xsk_wakeup can be misleading and simply makes it harder to follow what is going on. Change ENXIOs in ixgbe's ndo_xsk_wakeup() implementation to EINVALs, so that when probing it is clear that something is wrong on the driver side, not the xsk_{recv,send}msg. There is a -ENETDOWN that can happen from both kernel/driver sides though, but I don't have a correct replacement for this on one of the sides, so let's keep it that way. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-11-maciej.fijalkowski@intel.com
2022-04-15ixgbe, xsk: Terminate Rx side of NAPI when XSK Rx queue gets fullMaciej Fijalkowski
When XSK pool uses need_wakeup feature, correlate -ENOBUFS that was returned from xdp_do_redirect() with a XSK Rx queue being full. In such case, terminate the Rx processing that is being done on the current HW Rx ring and let the user space consume descriptors from XSK Rx queue so that there is room that driver can use later on. Introduce new internal return code IXGBE_XDP_EXIT that will indicate case described above. Note that it does not affect Tx processing that is bound to the same NAPI context, nor the other Rx rings. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-8-maciej.fijalkowski@intel.com
2022-04-15ixgbe, xsk: Decorate IXGBE_XDP_REDIR with likely()Maciej Fijalkowski
ixgbe_run_xdp_zc() suggests to compiler that XDP_REDIRECT is the most probable action returned from BPF program that AF_XDP has in its pipeline. Let's also bring this suggestion up to the callsite of ixgbe_run_xdp_zc() so that compiler will be able to generate more optimized code which in turn will make branch predictor happy. Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220413153015.453864-5-maciej.fijalkowski@intel.com
2022-03-08ixgbe: add improvement for MDD response functionalitySlawomir Mrozowicz
The 82599 PF driver disable VF driver after a special MDD event occurs. Adds the option for administrators to control whether VFs are automatically disabled after several MDD events. The automatically disabling is now the default mode for 82599 PF driver, as it is more reliable. This addresses CVE-2021-33061. Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-08ixgbe: add the ability for the PF to disable VF link stateSlawomir Mrozowicz
Add support for ndo_set_vf_link_state the Network Device Option that allows the PF driver to control the virtual link state of the VF devices. Without this change a VF cannot be disabled/enabled by the administrator. In the implementation the auto state takes over PF link state to VF link setting, the enable state is not supported, the disable state shut off the VF link regardless of the PF setting. Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
net/batman-adv/hard-interface.c commit 690bb6fb64f5 ("batman-adv: Request iflink once in batadv-on-batadv check") commit 6ee3c393eeb7 ("batman-adv: Demote batadv-on-batadv skip error message") https://lore.kernel.org/all/20220302163049.101957-1-sw@simonwunderlich.de/ net/smc/af_smc.c commit 4d08b7b57ece ("net/smc: Fix cleanup when register ULP fails") commit 462791bbfa35 ("net/smc: add sysctl interface for SMC") https://lore.kernel.org/all/20220302112209.355def40@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-03ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()Maciej Fijalkowski
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") addressed the ring transient state when MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the interface to through down/up. Maurice reported that when carrier is not ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU cycles due to the constant NAPI rescheduling as ixgbe_poll() states that there is still some work to be done. To fix this, do not set work_done to false for a !netif_carrier_ok(). Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") Reported-by: Maurice Baijens <maurice.baijens@ellips.com> Tested-by: Maurice Baijens <maurice.baijens@ellips.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-23ixgbe: Remove non-inclusive languagePiotr Skajewski
Remove non-inclusive language from the driver. Additionally correct the duplication "from from" reported by checkpatch after the changes above. Signed-off-by: Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31ixgbe: respect metadata on XSK Rx to skbAlexander Lobakin
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will be lost as it doesn't get copied to the skb. Copy it along with the frame headers. Account its size on skb allocation, and when copying just treat it as a part of the frame and do a pull after to "move" it to the "reserved" zone. net_prefetch() xdp->data_meta and align the copy size to speed-up memcpy() a little and better match ixgbe_construct_skb(). Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support") Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com> Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skbAlexander Lobakin
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD + NET_IP_ALIGN for any skb. OTOH, ixgbe_construct_skb_zc() currently allocates and reserves additional `xdp->data - xdp->data_hard_start`, which is XDP_PACKET_HEADROOM for XSK frames. There's no need for that at all as the frame is post-XDP and will go only to the networking stack core. Pass the size of the actual data only to __napi_alloc_skb() and don't reserve anything. This will give enough headroom for stack processing. Fixes: d0bcacd0a130 ("ixgbe: add AF_XDP zero-copy Rx support") Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directlyAlexander Lobakin
To not dereference bi->xdp each time in ixgbe_construct_skb_zc(), pass bi->xdp as an argument instead of bi. We can also call xsk_buff_free() outside of the function as well as assign bi->xdp to NULL, which seems to make it closer to its name. Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-27ixgbe: Remove useless DMA-32 fallback configurationChristophe JAILLET
As stated in [1], dma_set_mask() with a 64-bit mask never fails if dev->dma_mask is non-NULL. So, if it fails, the 32 bits case will also fail for the same reason. So, if dma_set_mask_and_coherent() succeeds, 'pci_using_dac' is known to be 1. Simplify code and remove some dead code accordingly. [1]: https://lkml.org/lkml/2021/6/7/398 Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-13Merge tag 'irq-core-2022-01-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Provide a new interface for affinity hints to provide a separation between hint and actual affinity change which has become a hidden property of the current interface - Fix up the in tree usage of the affinity hint interfaces Drivers: - No new irqchip drivers! - Fix GICv3 redistributor table reservation with RT across kexec - Fix GICv4.1 redistributor view of the VPE table across kexec - Add support for extra interrupts on spear-shirq - Make obtaining some interrupts optional for the Renesas drivers - Various cleanups and bug fixes" * tag 'irq-core-2022-01-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) irqchip/renesas-intc-irqpin: Use platform_get_irq_optional() to get the interrupt irqchip/renesas-irqc: Use platform_get_irq_optional() to get the interrupt irqchip/gic-v4: Disable redistributors' view of the VPE table at boot time irqchip/ingenic-tcu: Use correctly sized arguments for bit field irqchip/gic-v2m: Add const to of_device_id irqchip/imx-gpcv2: Mark imx_gpcv2_instance with __ro_after_init irqchip/spear-shirq: Add support for IRQ 0..6 irqchip/gic-v3-its: Limit memreserve cpuhp state lifetime irqchip/gic-v3-its: Postpone LPI pending table freeing and memreserve irqchip/gic-v3-its: Give the percpu rdist struct its own flags field net/mlx4: Use irq_update_affinity_hint() net/mlx5: Use irq_set_affinity_and_hint() hinic: Use irq_set_affinity_and_hint() scsi: lpfc: Use irq_set_affinity() mailbox: Use irq_update_affinity_hint() ixgbe: Use irq_update_affinity_hint() be2net: Use irq_update_affinity_hint() enic: Use irq_update_affinity_hint() RDMA/irdma: Use irq_update_affinity_hint() scsi: mpt3sas: Use irq_set_affinity_and_hint() ...
2022-01-08Merge branch 'linus' into irq/core, to fix conflictIngo Molnar
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-28ixgbe: switch to napi_build_skb()Alexander Lobakin
napi_build_skb() reuses per-cpu NAPI skbuff_head cache in order to save some cycles on freeing/allocating skbuff_heads on every new Rx or completed Tx. ixgbe driver runs Tx completion polling cycle right before the Rx one and uses napi_consume_skb() to feed the cache with skbuff_heads of completed entries, so it's never empty and always warm at that moment. Switch to the napi_build_skb() to relax mm pressure on heavy Rx. Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-15ixgbe: set X550 MDIO speed before talking to PHYCyril Novikov
The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support. This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure. Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup: * Use an Atom C3000 family system with at least one X552 LAN on the SoC * Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots) * Connect a live 10Gb Ethernet cable to an X550 port * Power cycle (not reset, doesn't always work) the system and boot Linux * Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17 Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <cnovikov@lynx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-15ixgbe: Document how to enable NBASE-T supportRobert Schlabbach
Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") introduced suppression of the advertisement of NBASE-T speeds by default, according to Todd Fujinaka to accommodate customers with network switches which could not cope with advertised NBASE-T speeds, as posted in the E1000-devel mailing list: https://sourceforge.net/p/e1000/mailman/message/37106269/ However, the suppression was not documented at all, nor was how to enable NBASE-T support. Properly document the NBASE-T suppression and how to enable NBASE-T support. Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-14xsk: Wipe out dead zero_copy_allocator declarationsMaciej Fijalkowski
zero_copy_allocator has been removed back when Bjorn Topel introduced xsk_buff_pool. Remove references to it that were dangling in the tree. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20211210171511.11574-1-maciej.fijalkowski@intel.com
2021-12-13bpf: Let bpf_warn_invalid_xdp_action() report more infoPaolo Abeni
In non trivial scenarios, the action id alone is not sufficient to identify the program causing the warning. Before the previous patch, the generated stack-trace pointed out at least the involved device driver. Let's additionally include the program name and id, and the relevant device name. If the user needs additional infos, he can fetch them via a kernel probe, leveraging the arguments added here. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/bpf/ddb96bb975cbfddb1546cf5da60e77d5100b533c.1638189075.git.pabeni@redhat.com
2021-12-10ixgbe: Use irq_update_affinity_hint()Nitesh Narayan Lal
The driver uses irq_set_affinity_hint() to update the affinity_hint mask that is consumed by the userspace to distribute the interrupts. However, under the hood irq_set_affinity_hint() also applies the provided cpumask (if not NULL) as the affinity for the given interrupt which is an undocumented side effect. To remove this side effect irq_set_affinity_hint() has been marked as deprecated and new interfaces have been introduced. Hence, replace the irq_set_affinity_hint() with the new interface irq_update_affinity_hint() that only updates the affinity_hint pointer. Signed-off-by: Nitesh Narayan Lal <nitesh@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20210903152430.244937-10-nitesh@redhat.com
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/phy/bcm7xxx.c d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations") f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") net/sched/sch_api.c b193e15ac69d ("net: prevent user from passing illegal stab size") 69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers") Both cases trivial - adjacent code additions. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-30ixgbe: let the xdpdrv work with more than 64 cpusJason Xing
Originally, ixgbe driver doesn't allow the mounting of xdpdrv if the server is equipped with more than 64 cpus online. So it turns out that the loading of xdpdrv causes the "NOMEM" failure. Actually, we can adjust the algorithm and then make it work through mapping the current cpu to some xdp ring with the protect of @tx_lock. Here are some numbers before/after applying this patch with xdp-example loaded on the eth0X: As client (tx path): Before After TCP_STREAM send-64 734.14 714.20 TCP_STREAM send-128 1401.91 1395.05 TCP_STREAM send-512 5311.67 5292.84 TCP_STREAM send-1k 9277.40 9356.22 (not stable) TCP_RR send-1 22559.75 21844.22 TCP_RR send-128 23169.54 22725.13 TCP_RR send-512 21670.91 21412.56 As server (rx path): Before After TCP_STREAM send-64 1416.49 1383.12 TCP_STREAM send-128 3141.49 3055.50 TCP_STREAM send-512 9488.73 9487.44 TCP_STREAM send-1k 9491.17 9356.22 (not stable) TCP_RR send-1 23617.74 23601.60 ... Notice: the TCP_RR mode is unstable as the official document explains. I tested many times with different parameters combined through netperf. Though the result is not that accurate, I cannot see much influence on this patch. The static key is places on the hot path, but it actually shouldn't cause a huge regression theoretically. Co-developed-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Shujin Li <lishujin@kuaishou.com> Signed-off-by: Jason Xing <xingwanli@kuaishou.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-29ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setupFeng Zhou
The ixgbe driver currently generates a NULL pointer dereference with some machine (online cpus < 63). This is due to the fact that the maximum value of num_xdp_queues is nr_cpu_ids. Code is in "ixgbe_set_rss_queues"". Here's how the problem repeats itself: Some machine (online cpus < 63), And user set num_queues to 63 through ethtool. Code is in the "ixgbe_set_channels", adapter->ring_feature[RING_F_FDIR].limit = count; It becomes 63. When user use xdp, "ixgbe_set_rss_queues" will set queues num. adapter->num_rx_queues = rss_i; adapter->num_tx_queues = rss_i; adapter->num_xdp_queues = ixgbe_xdp_queues(adapter); And rss_i's value is from f = &adapter->ring_feature[RING_F_FDIR]; rss_i = f->indices = f->limit; So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup", for (i = 0; i < adapter->num_rx_queues; i++) if (adapter->xdp_ring[i]->xsk_umem) It leads to panic. Call trace: [exception RIP: ixgbe_xdp+368] RIP: ffffffffc02a76a0 RSP: ffff9fe16202f8d0 RFLAGS: 00010297 RAX: 0000000000000000 RBX: 0000000000000020 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 000000000000001c RDI: ffffffffa94ead90 RBP: ffff92f8f24c0c18 R8: 0000000000000000 R9: 0000000000000000 R10: ffff9fe16202f830 R11: 0000000000000000 R12: ffff92f8f24c0000 R13: ffff9fe16202fc01 R14: 000000000000000a R15: ffffffffc02a7530 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235 10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384 11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd 12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb 13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88 14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319 15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290 16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8 17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64 18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9 19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c So I fix ixgbe_max_channels so that it will not allow a setting of queues to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup, take the smaller value of num_rx_queues and num_xdp_queues. Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/ptp/Kconfig: 55c8fca1dae1 ("ptp_pch: Restore dependency on PCI") e5f31552674e ("ethernet: fix PTP_1588_CLOCK dependencies") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error pathWang Hai
In ixgbe_xsk_pool_enable(), if ixgbe_xsk_wakeup() fails, We should restore the previous state and clean up the resources. Add the missing clear af_xdp_zc_qps and unmap dma to fix this bug. Fixes: d49e286d354e ("ixgbe: add tracking of AF_XDP zero-copy state for each queue pair") Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210817203736.3529939-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-20ixgbe: Fix packet corruption due to missing DMA syncMarkus Boehme
When receiving a packet with multiple fragments, hardware may still touch the first fragment until the entire packet has been received. The driver therefore keeps the first fragment mapped for DMA until end of packet has been asserted, and delays its dma_sync call until then. The driver tries to fit multiple receive buffers on one page. When using 3K receive buffers (e.g. using Jumbo frames and legacy-rx is turned off/build_skb is being used) on an architecture with 4K pages, the driver allocates an order 1 compound page and uses one page per receive buffer. To determine the correct offset for a delayed DMA sync of the first fragment of a multi-fragment packet, the driver then cannot just use PAGE_MASK on the DMA address but has to construct a mask based on the actual size of the backing page. Using PAGE_MASK in the 3K RX buffer/4K page architecture configuration will always sync the first page of a compound page. With the SWIOTLB enabled this can lead to corrupted packets (zeroed out first fragment, re-used garbage from another packet) and various consequences, such as slow/stalling data transfers and connection resets. For example, testing on a link with MTU exceeding 3058 bytes on a host with SWIOTLB enabled (e.g. "iommu=soft swiotlb=262144,force") TCP transfers quickly fizzle out without this patch. Cc: stable@vger.kernel.org Fixes: 0c5661ecc5dd7 ("ixgbe: fix crash in build_skb Rx code path") Signed-off-by: Markus Boehme <markubo@amazon.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01ixgbe: Fix an error handling path in 'ixgbe_probe()'Christophe JAILLET
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 6fabd715e6d8 ("ixgbe: Implement PCIe AER support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-05-03 08:42:45 +0000