summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe
AgeCommit message (Collapse)Author
2025-04-05treewide: Switch/rename to timer_delete[_sync]()Thomas Gleixner
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2025-04-02ixgbe: fix media type detection for E610 devicePiotr Kwapulinski
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") introduced incorrect media type detection for E610 device. It reproduces when advertised speed is modified after driver reload. Clear the previous outdated PHY type high value. Reproduction steps: modprobe ixgbe ethtool -s eth0 advertise 0x1000000000000 modprobe -r ixgbe modprobe ixgbe ethtool -s eth0 advertise 0x1000000000000 Result before the fix: netlink error: link settings update failed netlink error: Invalid argument Result after the fix: No output error Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-03-25Merge tag 'ipsec-next-2025-03-24' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2025-03-24 1) Prevent setting high order sequence number bits input in non-ESN mode. From Leon Romanovsky. 2) Support PMTU handling in tunnel mode for packet offload. From Leon Romanovsky. 3) Make xfrm_state_lookup_byaddr lockless. From Florian Westphal. 4) Remove unnecessary NULL check in xfrm_lookup_with_ifid(). From Dan Carpenter. * tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid() xfrm: state: make xfrm_state_lookup_byaddr lockless xfrm: check for PMTU in tunnel mode for packet offload xfrm: provide common xdo_dev_offload_ok callback implementation xfrm: rely on XFRM offload xfrm: simplify SA initialization routine xfrm: delay initialization of offload path till its actually requested xfrm: prevent high SEQ input in non-ESN mode ==================== Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-03-18ixgbe: add support for thermal sensor event receptionJedrzej Jagielski
E610 NICs unlike the previous devices utilising ixgbe driver are notified in the case of overheating by the FW ACI event. In event of overheat when threshold is exceeded, FW suspends all traffic and sends overtemp event to the driver. Then driver logs appropriate message and disables the adapter instance. The card remains in that state until the platform is rebooted. This approach is a solution to the fact current version of the E610 FW doesn't support reading thermal sensor data by the SW. So give to user at least any info that overtemp event has occurred, without interface disappearing from the OS without any note. Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Jeremiah Lokan <jeremiahx.j.lokan@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-7-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-03-18ixgbe: add PTP support for E610 devicePiotr Kwapulinski
Add PTP support for E610 adapter. The E610 is based on X550 and adds firmware managed link, enhanced security capabilities and support for updated server manageability. It does not introduce any new PTP features compared to X550. Reviewed-by: Milena Olech <milena.olech@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250310174502.3708121-6-anthony.l.nguyen@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-02-25ixgbe: fix media cage present detection for E610 devicePiotr Kwapulinski
The commit 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") introduced incorrect checking of media cage presence for E610 device. Fix it. Fixes: 23c0e5a16bcc ("ixgbe: Add link management support for E610 device") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e7d73b32-f12a-49d1-8b60-1ef83359ec13@stanley.mountain/ Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250224190647.3601930-6-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2025-02-21xfrm: provide common xdo_dev_offload_ok callback implementationLeon Romanovsky
Almost all drivers except bond and nsim had same check if device can perform XFRM offload on that specific packet. The check was that packet doesn't have IPv4 options and IPv6 extensions. In NIC drivers, the IPv4 HELEN comparison was slightly different, but the intent was to check for the same conditions. So let's chose more strict variant as a common base. Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2025-02-11ixgbe: Fix possible skb NULL pointer dereferencePiotr Kwapulinski
The commit c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") stopped utilizing the ERR-like macros for xdp status encoding. Propagate this logic to the ixgbe_put_rx_buffer(). The commit also relaxed the skb NULL pointer check - caught by Smatch. Restore this check. Fixes: c824125cbb18 ("ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/intel-wired-lan/2c7d6c31-192a-4047-bd90-9566d0e14cc0@stanley.mountain/ Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2025-01-07ixgbe: Fix passing 0 to ERR_PTR in ixgbe_run_xdp()Yue Haibing
ixgbe_run_xdp() converts customed xdp action to a negative error code with the sk_buff pointer type which be checked with IS_ERR in ixgbe_clean_rx_irq(). Remove this error pointer handing instead use plain int return value. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20250106221929.956999-11-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20ixgbe: Enable link management in E610 devicePiotr Kwapulinski
Add high level link management support for E610 device. Enable the following features: - driver load - bring up network interface - IP address assignment - pass traffic - show statistics (e.g. via ethtool) - disable network interface - driver unload Co-developed-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jan Glaza <jan.glaza@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Clean up the E610 link management related codePiotr Kwapulinski
Required for enabling the link management in E610 device. Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Add ixgbe_x540 multiple header inclusion protectionPiotr Kwapulinski
Required to adopt x540 specific functions by E610 device. Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Add support for EEPROM dump in E610 devicePiotr Kwapulinski
Add low level support for EEPROM dump for the specified network device. Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Add support for NVM handling in E610 devicePiotr Kwapulinski
Add low level support for accessing NVM in E610 device. NVM operations are handled via the Admin Command Interface. Add the following NVM specific operations: - acquire, release, read - validate checksum - read shadow ram Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Add link management support for E610 devicePiotr Kwapulinski
Add low level link management support for E610 device. Link management operations are handled via the Admin Command Interface. Add the following link management operations: - get link capabilities - set up link - get media type - get link status, link status events - link power management Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jan Glaza <jan.glaza@intel.com> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Add support for E610 device capabilities detectionPiotr Kwapulinski
Add low level support for E610 device capabilities detection. The capabilities are discovered via the Admin Command Interface. Discover the following capabilities: - function caps: vmdq, dcb, rss, rx/tx qs, msix, nvm, orom, reset - device caps: vsi, fdir, 1588 - phy caps Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-20ixgbe: Add support for E610 FW Admin Command InterfacePiotr Kwapulinski
Add low level support for Admin Command Interface (ACI). ACI is the Firmware interface used by a driver to communicate with E610 adapter. Add the following ACI features: - data structures, macros, register definitions - commands handling - events handling Co-developed-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Signed-off-by: Stefan Wegrzyn <stefan.wegrzyn@intel.com> Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharath R <bharath.r@intel.com> Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-03ixgbe: Correct BASE-BX10 compliance codeTore Amundsen
SFF-8472 (section 5.4 Transceiver Compliance Codes) defines bit 6 as BASE-BX10. Bit 6 means a value of 0x40 (decimal 64). The current value in the source code is 0x64, which appears to be a mix-up of hex and decimal values. A value of 0x64 (binary 01100100) incorrectly sets bit 2 (1000BASE-CX) and bit 5 (100BASE-FX) as well. Fixes: 1b43e0d20f2d ("ixgbe: Add 1000BASE-BX support") Signed-off-by: Tore Amundsen <tore@amundsen.org> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Ernesto Castellotti <ernesto@castellotti.net> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-12-03ixgbe: downgrade logging of unsupported VF API version to debugJacob Keller
The ixgbe PF driver logs an info message when a VF attempts to negotiate an API version which it does not support: VF 0 requested invalid api version 6 The ixgbevf driver attempts to load with mailbox API v1.5, which is required for best compatibility with other hosts such as the ESX VMWare PF. The Linux PF only supports API v1.4, and does not currently have support for the v1.5 API. The logged message can confuse users, as the v1.5 API is valid, but just happens to not currently be supported by the Linux PF. Downgrade the info message to a debug message, and fix the language to use 'unsupported' instead of 'invalid' to improve message clarity. Long term, we should investigate whether the improvements in the v1.5 API make sense for the Linux PF, and if so implement them properly. This may require yet another API version to resolve issues with negotiating IPSEC offload support. Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF") Reported-by: Yifei Liu <yifei.l.liu@oracle.com> Link: https://lore.kernel.org/intel-wired-lan/20240301235837.3741422-1-yifei.l.liu@oracle.com/ Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-11-15Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-11-05 (ice, ixgbe, igc. igb, igbvf, e1000) For ice: Mateusz refactors and adds additional SerDes configuration values to be output. Przemek refactors processing of DDP and adds support for a flag field in the DDP's signature segment header. Joe Damato adds support for persistent NAPI config. Brett adjusts setting of Tx promiscuous based on unicast/multicast setting. Jake moves setting of pf->supported_rxdids to occur directly after DDP load and changes a small struct to use stack memory. Frederic Weisbecker adds WQ_UNBOUND flag to the workqueue. For ixgbe: Diomidis Spinellis removes a circular dependency. For igc: Vitaly removes an unneeded autoneg parameter. For igb: Johnny Park fixes a couple of typos. For igbvf: Wander Lairson Costa removes an unused spinlock. For e1000: Joe Damato adds RTNL lock to some calls where it is expected to be held. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000: Hold RTNL when e1000_down can be called igbvf: remove unused spinlock igb: Fix 2 typos in comments in igb_main.c igc: remove autoneg parameter from igc_mac_info ixgbe: Break include dependency cycle ice: Unbind the workqueue ice: use stack variable for virtchnl_supported_rxdids ice: initialize pf->supported_rxdids immediately after loading DDP ice: only allow Tx promiscuous for multicast ice: Add support for persistent NAPI config ice: support optional flags in signature segment header ice: refactor "last" segment of DDP pkg ice: extend dump serdes equalizer values feature ice: rework of dump serdes equalizer values feature ==================== Link: https://patch.msgid.link/20241113185431.1289708-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-13ixgbe: Break include dependency cycleDiomidis Spinellis
Header ixgbe_type.h includes ixgbe_mbx.h. Also, header ixgbe_mbx.h included ixgbe_type.h, thus introducing a circular dependency. - Remove ixgbe_mbx.h inclusion from ixgbe_type.h. - ixgbe_mbx.h requires the definition of struct ixgbe_mbx_operations so move its definition there. While at it, add missing argument identifier names. - Add required forward structure declarations. - Include ixgbe_mbx.h in the .c files that need it, for the following reasons: ixgbe_sriov.c uses ixgbe_check_for_msg ixgbe_main.c uses ixgbe_init_mbx_params_pf ixgbe_82599.c uses mbx_ops_generic ixgbe_x540.c uses mbx_ops_generic ixgbe_x550.c uses mbx_ops_generic Signed-off-by: Diomidis Spinellis <dds@aueb.gr> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-09-06ixgbe: Remove setting of RX software timestampGal Pressman
The responsibility for reporting of RX software timestamp has moved to the core layer (see __ethtool_get_ts_info()), remove usage from the device drivers. Reviewed-by: Carolina Jubran <cjubran@nvidia.com> Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-09-03netdev_features: convert NETIF_F_FCOE_MTU to dev->fcoe_mtuAlexander Lobakin
Ability to handle maximum FCoE frames of 2158 bytes can never be changed and thus more of an attribute, not a toggleable feature. Move it from netdev_features_t to "cold" priv flags (bitfield bool) and free yet another feature bit. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-07-15Merge branch 'net-make-timestamping-selectable'Jakub Kicinski
First part of "net: Make timestamping selectable" from Kory Maincent. Change the driver-facing type already to lower rebasing pain. Link: https://lore.kernel.org/20240709-feature_ptp_netnext-v17-0-b5317f50df2a@bootlin.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-15net: Add struct kernel_ethtool_ts_infoKory Maincent
In prevision to add new UAPI for hwtstamp we will be limited to the struct ethtool_ts_info that is currently passed in fixed binary format through the ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code already started operating on an extensible kernel variant of that structure, similar in concept to struct kernel_hwtstamp_config vs struct hwtstamp_config. Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here we introduce the kernel-only structure in include/linux/ethtool.h. The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO. Acked-by: Shannon Nelson <shannon.nelson@amd.com> Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-07-11net: intel: Remove MODULE_AUTHORsTony Nguyen
We are moving away from the Sourceforge email address. Rather than removing or updating the email for the affected entries, remove the MODULE_AUTHOR altogether as its usage is incorrect [1]. Link: https://lore.kernel.org/netdev/20200626115236.7f36d379@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/ [1] Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Alexander Lobakin <aleksander.lobakin@intel.com> # libeth, libie Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-10net: intel: Use *-y instead of *-objs in MakefileAndy Shevchenko
*-objs suffix is reserved rather for (user-space) host programs while usually *-y suffix is used for kernel drivers (although *-objs works for that purpose for now). Let's correct the old usages of *-objs in Makefiles. Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240607-next-2024-06-03-intel-next-batch-v3-1-d1470cee3347@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-05-23Merge tag 'net-6.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Quite smaller than usual. Notably it includes the fix for the unix regression from the past weeks. The TCP window fix will require some follow-up, already queued. Current release - regressions: - af_unix: fix garbage collection of embryos Previous releases - regressions: - af_unix: fix race between GC and receive path - ipv6: sr: fix missing sk_buff release in seg6_input_core - tcp: remove 64 KByte limit for initial tp->rcv_wnd value - eth: r8169: fix rx hangup - eth: lan966x: remove ptp traps in case the ptp is not enabled - eth: ixgbe: fix link breakage vs cisco switches - eth: ice: prevent ethtool from corrupting the channels Previous releases - always broken: - openvswitch: set the skbuff pkt_type for proper pmtud support - tcp: Fix shift-out-of-bounds in dctcp_update_alpha() Misc: - a bunch of selftests stabilization patches" * tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits) r8169: Fix possible ring buffer corruption on fragmented Tx packets. idpf: Interpret .set_channels() input differently ice: Interpret .set_channels() input differently nfc: nci: Fix handling of zero-length payload packets in nci_rx_work() net: relax socket state check at accept time. tcp: remove 64 KByte limit for initial tp->rcv_wnd value net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe() tls: fix missing memory barrier in tls_init net: fec: avoid lock evasion when reading pps_enable Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI" testing: net-drv: use stats64 for testing net: mana: Fix the extra HZ in mana_hwc_send_request net: lan966x: Remove ptp traps in case the ptp is not enabled. openvswitch: Set the skbuff pkt_type for proper pmtud support. selftest: af_unix: Make SCM_RIGHTS into OOB data. af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS tcp: Fix shift-out-of-bounds in dctcp_update_alpha(). selftests/net: use tc rule to filter the na packet ipv6: sr: fix memleak in seg6_hmac_init_algo af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock. ...
2024-05-23Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"Jacob Keller
This reverts commit 565736048bd5f9888990569993c6b6bfdf6dcb6d. According to the commit, it implements a manual AN-37 for some "troublesome" Juniper MX5 switches. This appears to be a workaround for a particular switch. It has been reported that this causes a severe breakage for other switches, including a Cisco 3560CX-12PD-S. The code appears to be a workaround for a specific switch which fails to link in SFI mode. It expects to see AN-37 auto negotiation in order to link. The Cisco switch is not expecting AN-37 auto negotiation. When the device starts the manual AN-37, the Cisco switch decides that the port is confused and stops attempting to link with it. This persists until a power cycle. A simple driver unload and reload does not resolve the issue, even if loading with a version of the driver which lacks this workaround. The authors of the workaround commit have not responded with clarifications, and the result of the workaround is complete failure to connect with other switches. This appears to be a case where the driver can either "correctly" link with the Juniper MX5 switch, at the cost of bricking the link with the Cisco switch, or it can behave properly for the Cisco switch, but fail to link with the Junipir MX5 switch. I do not know enough about the standards involved to clearly determine whether either switch is at fault or behaving incorrectly. Nor do I know whether there exists some alternative fix which corrects behavior with both switches. Revert the workaround for the Juniper switch. Fixes: 565736048bd5 ("ixgbe: Manual AN-37 for troublesome link partners for X550 SFI") Link: https://lore.kernel.org/netdev/cbe874db-9ac9-42b8-afa0-88ea910e1e99@intel.com/T/ Link: https://forum.proxmox.com/threads/intel-x553-sfp-ixgbe-no-go-on-pve8.135129/#post-612291 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Daly <jeffd@silicom-usa.com> Cc: kernel.org-fo5k2w@ycharbi.fr Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240520-net-2024-05-20-revert-silicom-switch-workaround-v1-1-50f80f261c94@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-05-20Merge tag 'dma-mapping-6.10-2024-05-20' of ↵Linus Torvalds
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping updates from Christoph Hellwig: - optimize DMA sync calls when they are no-ops (Alexander Lobakin) - fix swiotlb padding for untrusted devices (Michael Kelley) - add documentation for swiotb (Michael Kelley) * tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping: dma: fix DMA sync for drivers not calling dma_set_mask*() xsk: use generic DMA sync shortcut instead of a custom one page_pool: check for DMA sync shortcut earlier page_pool: don't use driver-set flags field directly page_pool: make sure frag API fields don't span between cachelines iommu/dma: avoid expensive indirect calls for sync operations dma: avoid redundant calls for sync operations dma: compile-out DMA sync op calls when not used iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices swiotlb: remove alloc_size argument to swiotlb_tbl_map_single() Documentation/core-api: add swiotlb documentation
2024-05-08net: e1000e & ixgbe: Remove PCI_HEADER_TYPE_MFD duplicatesIlpo Järvinen
PCI_HEADER_TYPE_MULTIFUNC is define by e1000e and ixgbe and both are unused. There is already PCI_HEADER_TYPE_MFD in pci_regs.h anyway which should be used instead so remove the duplicated defines of it. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-05-08xsk: use generic DMA sync shortcut instead of a custom oneAlexander Lobakin
XSk infra's been using its own DMA sync shortcut to try avoiding redundant function calls. Now that there is a generic one, remove the custom implementation and rely on the generic helpers. xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore, remove it. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Simon Horman <horms@kernel.org> Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/ Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01Merge branch '1GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-29 (net: intel) This series contains updates to most Intel drivers. Jesse moves declaration of pci_driver struct to remove need for forward declarations in igb and converts Intel drivers to user newer power management ops. Sasha reworks power management flow on igc to avoid using rtnl_lock() during those flows. Maciej reorganizes i40e_nvm file to avoid forward declarations. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: avoid forward declarations in i40e_nvm.c igc: Refactor runtime power management flow net: intel: implement modern PM ops declarations igb: simplify pci ops declaration ==================== Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29netlink: introduce type-checking attribute iterationJohannes Berg
There are, especially with multi-attr arrays, many cases of needing to iterate all attributes of a specific type in a netlink message or a nested attribute. Add specific macros to support that case. Also convert many instances using this spatch: @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) == ATTR) { ... -} } @@ iterator nla_for_each_attr; iterator name nla_for_each_attr_type; identifier nla; expression head, len, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_attr(nla, head, len, rem) +nla_for_each_attr_type(nla, ATTR, head, len, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } @@ identifier nla; iterator nla_for_each_nested; iterator name nla_for_each_nested_type; expression attr, rem; expression ATTR; type T; identifier x; @@ -nla_for_each_nested(nla, attr, rem) +nla_for_each_nested_type(nla, ATTR, attr, rem) { <... T x; ...> -if (nla_type(nla) != ATTR) continue; ... } Although I had to undo one bad change this made, and I also adjusted some other code for whitespace and to use direct variable initialization now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-29net: intel: implement modern PM ops declarationsJesse Brandeburg
Switch the Intel networking drivers to use the new power management ops declaration formats and macros, which allows us to drop __maybe_unused, as well as a bunch of ifdef checking CONFIG_PM. This is safe to do because the compiler drops the unused functions, verified by checking for any of the power management function symbols being present in System.map for a build without CONFIG_PM. If a driver has runtime PM, define the ops with pm_ptr(), and if the driver has Simple PM, use pm_sleep_ptr(), as well as the new versions of the macros for declaring the members of the pm_ops structs. Checked with network-enabled allnoconfig, allyesconfig, allmodconfig on x64_64. Reviewed-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-28net: remove gfp_mask from napi_alloc_skb()Jakub Kicinski
__napi_alloc_skb() is napi_alloc_skb() with the added flexibility of choosing gfp_mask. This is a NAPI function, so GFP_ATOMIC is implied. The only practical choice the caller has is whether to set __GFP_NOWARN. But that's a false choice, too, allocation failures in atomic context will happen, and printing warnings in logs, effectively for a packet drop, is both too much and very likely non-actionable. This leads me to a conclusion that most uses of napi_alloc_skb() are simply misguided, and should use __GFP_NOWARN in the first place. We also have a "standard" way of reporting allocation failures via the queue stat API (qstats::rx-alloc-fail). The direct motivation for this patch is that one of the drivers used at Meta calls napi_alloc_skb() (so prior to this patch without __GFP_NOWARN), and the resulting OOM warning is the top networking warning in our fleet. Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240327040213.3153864-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-25ixgbe: avoid sleeping allocation in ixgbe_ipsec_vf_add_sa()Przemek Kitszel
Change kzalloc() flags used in ixgbe_ipsec_vf_add_sa() to GFP_ATOMIC, to avoid sleeping in IRQ context. Dan Carpenter, with the help of Smatch, has found following issue: The patch eda0333ac293: "ixgbe: add VF IPsec management" from Aug 13, 2018 (linux-next), leads to the following Smatch static checker warning: drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c:917 ixgbe_ipsec_vf_add_sa() warn: sleeping in IRQ context The call tree that Smatch is worried about is: ixgbe_msix_other() <- IRQ handler -> ixgbe_msg_task() -> ixgbe_rcv_msg_from_vf() -> ixgbe_ipsec_vf_add_sa() Fixes: eda0333ac293 ("ixgbe: add VF IPsec management") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/intel-wired-lan/db31a0b0-4d9f-4e6b-aed8-88266eb5665c@moroto.mountain Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-08Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-06 (iavf, i40e, ixgbe) This series contains updates to iavf, i40e, and ixgbe drivers. Alexey Kodanev removes duplicate calls related to cloud filters on iavf and unnecessary null checks on i40e. Maciej adds helper functions for common code relating to updating statistics for ixgbe. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-06ixgbe: pull out stats update to common routinesMaciej Fijalkowski
Introduce ixgbe_update_{r,t}x_ring_stats() that will be used by both standard and ZC datapath. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-04ixgbe: Add 1000BASE-BX supportErnesto Castellotti
Added support for 1000BASE-BX, i.e. Gigabit Ethernet over single strand of single-mode fiber. The initialization of a 1000BASE-BX SFP is the same as 1000BASE-SX/LX with the only difference that the Bit Rate Nominal Value must be checked to make sure it is a Gigabit Ethernet transceiver, as described by the SFF-8472 specification. This was tested with the FS.com SFP-GE-BX 1310/1490nm 10km transceiver: $ ethtool -m eth4 Identifier : 0x03 (SFP) Extended identifier : 0x04 (GBIC/SFP defined by 2-wire interface ID) Connector : 0x07 (LC) Transceiver codes : 0x00 0x00 0x00 0x40 0x00 0x00 0x00 0x00 0x00 Transceiver type : Ethernet: BASE-BX10 Encoding : 0x01 (8B/10B) BR, Nominal : 1300MBd Rate identifier : 0x00 (unspecified) Length (SMF,km) : 10km Length (SMF) : 10000m Length (50um) : 0m Length (62.5um) : 0m Length (Copper) : 0m Length (OM3) : 0m Laser wavelength : 1310nm Vendor name : FS Vendor OUI : 64:9d:99 Vendor PN : SFP-GE-BX Vendor rev : Option values : 0x20 0x0a Option : RX_LOS implemented Option : TX_FAULT implemented Option : Power level 3 requirement BR margin, max : 0% BR margin, min : 0% Vendor SN : S2202359108 Date code : 220307 Optical diagnostics support : Yes Laser bias current : 17.650 mA Laser output power : 0.2132 mW / -6.71 dBm Receiver signal average optical power : 0.2740 mW / -5.62 dBm Module temperature : 47.30 degrees C / 117.13 degrees F Module voltage : 3.2576 V Alarm/warning flags implemented : Yes Laser bias current high alarm : Off Laser bias current low alarm : Off Laser bias current high warning : Off Laser bias current low warning : Off Laser output power high alarm : Off Laser output power low alarm : Off Laser output power high warning : Off Laser output power low warning : Off Module temperature high alarm : Off Module temperature low alarm : Off Module temperature high warning : Off Module temperature low warning : Off Module voltage high alarm : Off Module voltage low alarm : Off Module voltage high warning : Off Module voltage low warning : Off Laser rx power high alarm : Off Laser rx power low alarm : Off Laser rx power high warning : Off Laser rx power low warning : Off Laser bias current high alarm threshold : 110.000 mA Laser bias current low alarm threshold : 1.000 mA Laser bias current high warning threshold : 100.000 mA Laser bias current low warning threshold : 1.000 mA Laser output power high alarm threshold : 0.7079 mW / -1.50 dBm Laser output power low alarm threshold : 0.0891 mW / -10.50 dBm Laser output power high warning threshold : 0.6310 mW / -2.00 dBm Laser output power low warning threshold : 0.1000 mW / -10.00 dBm Module temperature high alarm threshold : 90.00 degrees C / 194.00 degrees F Module temperature low alarm threshold : -45.00 degrees C / -49.00 degrees F Module temperature high warning threshold : 85.00 degrees C / 185.00 degrees F Module temperature low warning threshold : -40.00 degrees C / -40.00 degrees F Module voltage high alarm threshold : 3.7950 V Module voltage low alarm threshold : 2.8050 V Module voltage high warning threshold : 3.4650 V Module voltage low warning threshold : 3.1350 V Laser rx power high alarm threshold : 0.7079 mW / -1.50 dBm Laser rx power low alarm threshold : 0.0028 mW / -25.53 dBm Laser rx power high warning threshold : 0.6310 mW / -2.00 dBm Laser rx power low warning threshold : 0.0032 mW / -24.95 dBm Signed-off-by: Ernesto Castellotti <ernesto@castellotti.net> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04intel: make module parameters readable in sys filesystemJon Maxwell
Linux users sometimes need an easy way to check current values of module parameters. For example the module may be manually reloaded with different parameters. Make these visible and readable in the /sys filesystem to allow that. But don't make the "debug" module parameter visible as debugging is enabled via ethtool msglvl. Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240301184806.2634508-2-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-04net: adopt skb_network_offset() and similar helpersEric Dumazet
This is a cleanup patch, making code a bit more concise. 1) Use skb_network_offset(skb) in place of (skb_network_header(skb) - skb->data) 2) Use -skb_network_offset(skb) in place of (skb->data - skb_network_header(skb)) 3) Use skb_transport_offset(skb) in place of (skb_transport_header(skb) - skb->data) 4) Use skb_inner_transport_offset(skb) in place of (skb_inner_transport_header(skb) - skb->data) Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> # for sfc Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-01ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}ableMaciej Fijalkowski
Currently routines that are supposed to toggle state of ring pair do not take care of associated interrupt with queue vector that these rings belong to. This causes funky issues such as dead interface due to irq misconfiguration, as per Pavel's report from Closes: tag. Add a function responsible for disabling single IRQ in EIMC register and call this as a very first thing when disabling ring pair during xsk_pool setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this, disable/enable NAPI as first/last thing when dealing with closing or opening ring pair that xsk_pool is being configured on. Reported-by: Pavel Vazharov <pavel@x3me.net> Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/ Fixes: 024aa5800f32 ("ixgbe: added Rx/Tx ring disable/enable functions") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-28net: ethernet: ixgbe: Convert EEE to use linkmodesAndrew Lunn
Convert the tables to make use of ETHTOOL link mode bits, rather than the old u32 SUPPORTED speeds. Make use of the linkmode helps to set bits and compare linkmodes. As a result, the _u32 members of keee are no longer used, a step towards removing them. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-06ixgbe: Clarify the values of the returning statusJedrzej Jagielski
Converting s32 functions to regular int in the previous patch of the series caused triggering smatch warnings about missing error code. New smatch warnings: drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2884 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:3130 ixgbe_enter_lplu_t_x550em() warn: missing error code? 'status' Old smatch warnings: drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c:2890 ixgbe_get_lcd_t_x550em() warn: missing error code? 'status' Fix it by clearly stating returning error code as 0. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/r/202401041701.6QKTsZmx-lkp@intel.com/ Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-06ixgbe: Rearrange args to fix reverse Christmas treeJedrzej Jagielski
Clean up the code touched during type conversion by the previous patch of the series. Suggested-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-02-06ixgbe: Convert ret val type from s32 to intJedrzej Jagielski
Currently big amount of the functions returning standard error codes are of type s32. Convert them to regular ints as typdefs here are not necessary to return standard error codes. Fix incorrect args alignment in touched functions. Suggested-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit (git 2.34.1) at 2025-05-03 20:21:01 +0000