summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath11k/mac.c
AgeCommit message (Collapse)Author
14 dayswifi: ath11k: support DBS and DFS compatibilityYu Zhang(Yuriy)
Now some chips which support 'support_dual_stations' will enable DBS, but will disable DFS. Restructure the ath11k_mac_setup_iface_combinations function to support DBS and DFS compatibility. About 'support_dual_station' feature can refer: https://msgid.link/20230714023801.2621802-2-quic_cjhuang@quicinc.com Add a ieee80211_iface_combination to support DBS and DFS compatibility, one combination can support DFS(same with non dual sta), another combination can support DBS. When running different scenarios that will use different ieee80211_iface_combination due to mac80211 will go through all of possible interface combinations. In addition, maximum number of interfaces of these types should be total allowed in this group. The chips affected are: QCA6390 hw2.0 WCN6855 hw2.0 WCN6855 hw2.1 Other chips are not affected. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-00410-QCAHKSWPL_SILICONZ-2 Tested-on: IPQ6018 hw1.0 AHB WLAN.HK.2.1.0.1-01161-QCAHKSWPL_SILICONZ-1 Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04402-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-05266-QCAHSTSWPLZ_V2_TO_X86-1 Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com> Reviewed-by: Baochen Qiang <quic_bqiang@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Tested-by: Mihai Moldovan <ionic@ionic.de> Link: https://patch.msgid.link/20241127022742.4016870-1-quic_yuzha@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-04-23wifi: mac80211: restructure tx profile retrieval for MLO MBSSIDRameshkumar Sundaram
For MBSSID, each vif (struct ieee80211_vif) stores another vif pointer for the transmitting profile of MBSSID set. This won't suffice for MLO as there may be multiple links, each of which can be part of different MBSSID sets. Hence the information needs to be stored per-link. Additionally, the transmitted profile itself may be part of an MLD hence storing vif will not suffice either. Fix MLO by storing an instance of struct ieee80211_bss_conf for each link. Modify following operations to reflect the above structure updates: - channel switch completion - BSS color change completion - Removing nontransmitted links in ieee80211_stop_mbssid() - drivers retrieving the transmitted link for beacon templates. Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com> Co-developed-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Signed-off-by: Muna Sinada <muna.sinada@oss.qualcomm.com> Co-developed-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Link: https://patch.msgid.link/20250408184501.3715887-3-aloka.dixit@oss.qualcomm.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2025-02-28wifi: ath11k: pass tx arvif for MBSSID and EMA beacon generationAloka Dixit
Function ath11k_mac_setup_bcn_tmpl() retrieves tx_arvif only for a sanity check and then calls ath11k_mac_setup_bcn_tmpl_mbssid() or ath11k_mac_setup_bcn_tmpl_ema() both of which again retrieve the same pointer. Instead store the pointer and pass it to the latter two functions. Compile tested only. Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250210182718.408891-3-aloka.dixit@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-28wifi: ath11k: refactor transmitted arvif retrievalAloka Dixit
Create a new function ath11k_mac_get_tx_arvif() to retrieve 'arvif' for the transmitted interface of the MBSSID set. This will help modifying the same code path to reflect mac80211 data structure changes to support MLO. This also fixes an issue in ath11k_mac_update_vif_chan() where tx_arvif is not reset to NULL inside for loop during each iteration. Compile tested only. Signed-off-by: Aloka Dixit <aloka.dixit@oss.qualcomm.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250210182718.408891-2-aloka.dixit@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-05wifi: ath11k: update channel list in worker when wait flag is setWen Gong
With previous patch "wifi: ath11k: move update channel list from update reg worker to reg notifier", ath11k_reg_update_chan_list() will be called during reg_process_self_managed_hint(). reg_process_self_managed_hint() will hold rtnl_lock all the time. But ath11k_reg_update_chan_list() may increase the occupation time of rtnl_lock, because when wait flag is set, wait_for_completion_timeout() will be called during 11d/hw scan. Should minimize the occupation time of rtnl_lock as much as possible to avoid interfering with rest of the system. So move the update channel list operation to a new worker, so that wait_for_completion_timeout() won't be called and will not increase the occupation time of rtnl_lock. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Co-developed-by: Kang Yang <quic_kangyang@quicinc.com> Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Reviewed-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://patch.msgid.link/20250117061737.1921-3-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath11k: fix wrong overriding for VHT Beamformee STS CapabilityYu Zhang(Yuriy)
Current code in ath11k_mac_set_txbf_conf overrides nsts, which is incorrect as it confuses nss and nsts. nss is Number of Spatial Streams，nsts is Number of Space-Time Streams. As mentioned in Fixes: 55b5ee3357d7, the nss used when acting as a beamformee in VHT mode should be reported by the firmware and should not be greater than the number of receiving antennas - 1. The num_rx_chains related nss rather than nsts. If STBC is enabled, nsts is greater than nss. About nss are mapped to nsts, refer to IEEE Std 802.11-2020: 19.3.11.9.2 Space-time block coding (STBC), Table 19-18—Constellation mapper output to spatial mapper input for STBC. Remove wrong overriding for nsts of VHT Beamformee STS Capability, acting DL MU-MIMO in VHT mode is working properly. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04479-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 Fixes: 55b5ee3357d7 ("wifi: ath11k: fix number of VHT beamformee spatial streams") Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250124075953.2282354-1-quic_yuzha@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath11k: add support for MU EDCAYu Zhang(Yuriy)
The current code does not have the MU EDCA feature, so it cannot support the use of EDCA by STA in specific UL MU HE TB PPDU transmissions. Refer to IEEE Std 802.11ax-2021 "9.4.2.251 MU EDCA Parameter Set element", "26.2.7 EDCA operation using MU EDCA parameters". Add ath11k_mac_op_conf_tx_mu_edca() to construct the MU EDCA parameters received from mac80211 into WMI WMM parameters，and send to the firmware according to the different WMM type flags. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04523-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 Signed-off-by: Yu Zhang (Yuriy) <quic_yuzha@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Link: https://patch.msgid.link/20250124061343.2263467-1-quic_yuzha@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-12-09Merge tag 'ath-next-20241209' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.14 This development cycle featured multiple patchsets to ath12k to support the new 802.11be MLO feature, although the feature is still incomplete. Also in ath12k, there were other feature patches. In ath11k, support was added for QCA6698AQ. And there was the usual set of bug fixes and cleanups across most drivers, notable being the addition of "noinline_for_stack" to some functions to avoid "stack frame size" warnings when compiling with clang.
2024-12-04wifi: mac80211: get tx power per linkRameshkumar Sundaram
ML interfaces can have multiple affiliated links to it and hence there is a need to report tx power of specified link rather deflink. Add changes to report tx power of requested link from mac80211, also pass link id as an argument in get_tx_power op so that supported drivers can use it to report link's tx power. Co-developed-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Aaradhana Sahu <quic_aarasahu@quicinc.com> Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com> Link: https://patch.msgid.link/20241125083217.216095-3-quic_ramess@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-11-21wifi: ath11k: miscellaneous spelling fixesDmitry Antipov
Correct spelling here and there as suggested by codespell. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241111070152.85140-4-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-11-21wifi: ath11k: cleanup struct ath11k_vifDmitry Antipov
Remove set but otherwise unused 'tx_seq_no' member of 'struct ath11k_vif', adjust 'ath11k_control_beaconing()' accordingly. This field was actually unused since an initial commit of the driver. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://patch.msgid.link/20241111070152.85140-1-dmantipov@yandex.ru Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-10-23wifi: mac80211: call rate_control_rate_update() for link STAJohannes Berg
In order to update the right link information, call the update rate_control_rate_update() with the right link_sta, and then pass that through to the driver's sta_rc_update() method. The software rate control still doesn't support it, but that'll be skipped by not having a rate control ref. Since it now operates on a link sta, rename the driver method. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/phy/phy_device.c 2560db6ede1a ("net: phy: Fix missing of_node_put() for leds") 1dce520abd46 ("net: phy: Use for_each_available_child_of_node_scoped()") https://lore.kernel.org/20240904115823.74333648@canb.auug.org.au Adjacent changes: drivers/net/ethernet/xilinx/xilinx_axienet.h drivers/net/ethernet/xilinx/xilinx_axienet_main.c 858430db28a5 ("net: xilinx: axienet: Fix race in axienet_stop") 76abb5d675c4 ("net: xilinx: axienet: Add statistics support") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-08-22wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power()Baochen Qiang
Commit 39dc8b8ea387 ("wifi: mac80211: pass parsed TPE data to drivers") breaks ath11k, leading to kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:ath11k_mac_get_eirp_power.isra.0+0x5b/0x80 [ath11k] Call Trace: <TASK> ath11k_mac_fill_reg_tpc_info+0x3d6/0x800 [ath11k] ath11k_mac_vdev_start_restart+0x412/0x4d0 [ath11k] ath11k_mac_op_sta_state+0x7bc/0xbb0 [ath11k] drv_sta_state+0xf1/0x5f0 [mac80211] sta_info_insert_rcu+0x28d/0x530 [mac80211] sta_info_insert+0xf/0x20 [mac80211] ieee80211_prep_connection+0x3b4/0x4c0 [mac80211] ieee80211_mgd_auth+0x363/0x600 [mac80211] The issue scenario is, AP advertises power spectral density (PSD) values in its transmit power envelope (TPE) IE and supports 160 MHz bandwidth in 6 GHz. When connecting to this AP, in ath11k_mac_parse_tx_pwr_env(), the local variable psd is true and then reg_tpc_info.num_pwr_levels is set to 8 due to 160 MHz bandwidth. Note here ath11k fails to set reg_tpc_info.is_psd_power as TRUE due to above commit. Then in ath11k_mac_fill_reg_tpc_info(), for each of the 8 power levels, for a PSD channel, ath11k_mac_get_psd_channel() is expected to be called to get required information. However due to invalid reg_tpc_info.is_psd_power, it is ath11k_mac_get_eirp_power() that gets called and passed with pwr_lvl_idx as one of the arguments. Note this function implicitly requires pwr_lvl_idx to be no more than 3. So when pwr_lvl_idx is larger than that ath11k_mac_get_seg_freq() returns invalid center frequency, with which as the input ieee80211_get_channel() returns NULL, then kernel crashes due to NULL pointer dereference. Fix it by setting reg_tpc_info.is_psd_power properly. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: 39dc8b8ea387 ("wifi: mac80211: pass parsed TPE data to drivers") Reported-by: Mikko Tiihonen <mikko.tiihonen@iki.fi> Tested-by: Mikko Tiihonen <mikko.tiihonen@iki.fi> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219131 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240813083808.9224-1-quic_bqiang@quicinc.com
2024-07-10wifi: ath11k: use work queue to process beacon tx eventKang Yang
Commit 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template") from Feb 28, 2024 (linux-next), leads to the following Smatch static checker warning: drivers/net/wireless/ath/ath11k/wmi.c:1742 ath11k_wmi_p2p_go_bcn_ie() warn: sleeping in atomic context The reason is that ath11k_bcn_tx_status_event() will directly call might sleep function ath11k_wmi_cmd_send() during RCU read-side critical sections. The call trace is like: ath11k_bcn_tx_status_event() -> rcu_read_lock() -> ath11k_mac_bcn_tx_event() -> ath11k_mac_setup_bcn_tmpl() …… -> ath11k_wmi_bcn_tmpl() -> ath11k_wmi_cmd_send() -> rcu_read_unlock() Commit 886433a98425 ("ath11k: add support for BSS color change") added the ath11k_mac_bcn_tx_event(), commit 01e782c89108 ("ath11k: fix warning of RCU usage for ath11k_mac_get_arvif_by_vdev_id()") added the RCU lock to avoid warning but also introduced this BUG. Use work queue to avoid directly calling ath11k_mac_bcn_tx_event() during RCU critical sections. No need to worry about the deletion of vif because cancel_work_sync() will drop the work if it doesn't start or block vif deletion until the running work is done. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: 3a415daa3e8b ("wifi: ath11k: add P2P IE in beacon template") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/2d277abd-5e7b-4da0-80e0-52bd96337f6e@moroto.mountain/ Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626053543.1946-1-quic_kangyang@quicinc.com
2024-07-03Merge tag 'ath-next-20240702' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath ath.git patches for v6.11 We have moved to a new group-managed repo, and this is the first pull request from that repo, and from me. Fingers crossed... We have some new features in ath12k along with some cleanups in ath11k and ath12k. Also notable are some device-tree changes to allow certain ath11k and ath12k devices to work with a new power sequencing subsystem. Major changes: ath12k * DebugFS support for datapath statistics * WCN7850: support for WoW (Wake on WLAN) * WCN7850: device-tree bindings ath11k * QCA6390: device-tree bindings
2024-06-26wifi: mac80211: inform the low level if drv_stop() is a suspendEmmanuel Grumbach
This will allow the low level driver to take different actions for different flows. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-06-19wifi: ath11k: modify the calculation of the average signal strength in ↵Lingbo Kong
station mode Currently, the calculation of the average signal strength in station mode is incorrect. This is because before calculating the average signal strength, ath11k need to determine whether the hardware and firmware support db2dbm, if the hardware and firmware support db2dbm, do not need to add noise floor, otherwise, need to add noise floor. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240309121129.5379-1-quic_lingbok@quicinc.com
2024-06-11wifi: ath11k: fix wrong handling of CCMP256 and GCMP ciphersBaochen Qiang
Currently for CCMP256, GCMP128 and GCMP256 ciphers, in ath11k_install_key() IEEE80211_KEY_FLAG_GENERATE_IV_MGMT is not set. And in ath11k_mac_mgmt_tx_wmi() a length of IEEE80211_CCMP_MIC_LEN is reserved for all ciphers. This results in unexpected management frame drop in case either of above 3 ciphers is used. The reason is, without IEEE80211_KEY_FLAG_GENERATE_IV_MGMT set, mac80211 will not generate CCMP/GCMP headers in frame for ath11k. Also MIC length reserved is wrong. Such frame is dropped later by hardware: ath11k_pci 0000:5a:00.0: mac tx mgmt frame, buf id 0 ath11k_pci 0000:5a:00.0: mgmt tx compl ev pdev_id 1, desc_id 0, status 1 From user point of view, we have observed very low throughput due to this issue: action frames are all dropped so ADDBA response from DUT never reaches AP. AP can not use aggregation thus throughput is low. Fix this by setting IEEE80211_KEY_FLAG_GENERATE_IV_MGMT flag and by reserving proper MIC length for those ciphers. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Reported-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com> Closes: https://lore.kernel.org/all/CADS+iDX5=JtJr0apAtAQ02WWBxgOFEv8G063vuGYwDTC8AVZaw@mail.gmail.com Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240605014826.22498-1-quic_bqiang@quicinc.com
2024-06-11wifi: ath11k: fix RCU documentation in ath11k_mac_op_ipv6_changed()Baochen Qiang
Current documentation on RCU in ath11k_mac_op_ipv6_changed() says: /* Note: read_lock_bh() calls rcu_read_lock() */ read_lock_bh(&idev->lock); This is wrong because without enabling CONFIG_PREEMPT_RT rcu_read_lock() is not called by read_lock_bh(). The reason why current code works even in a CONFIG_PREEMPT_RT=n kernel is because atomic_notifier_call_chain() already does that for us, see: int atomic_notifier_call_chain() { ... rcu_read_lock(); ret = notifier_call_chain(&nh->head, val, v, -1, NULL); rcu_read_unlock(); ... } and backtrace: ath11k_mac_op_ipv6_changed ieee80211_ifa6_changed notifier_call_chain atomic_notifier_call_chain So update the comment to make it correct. This is found during code review, compile tested only. Fixes: feafe59c8975 ("wifi: ath11k: use RCU when accessing struct inet6_dev::ac_list") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240531022411.6543-1-quic_bqiang@quicinc.com
2024-06-10Merge tag 'wireless-next-2024-06-07' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.11 The first "new features" pull request for v6.11 with changes both in stack and in drivers. Nothing out of ordinary, except that we have two conflicts this time: net/mac80211/cfg.c https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au drivers/net/wireless/microchip/wilc1000/netdev.c https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au Major changes: cfg80211/mac80211 * parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers wilc1000 * read MAC address during probe to make it visible to user space iwlwifi * bump FW API to 91 for BZ/SC devices * report 64-bit radiotap timestamp * enable P2P low latency by default * handle Transmit Power Envelope (TPE) advertised by AP * start using guard() rtlwifi * RTL8192DU support ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets * tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits) wifi: ath12k: add hw_link_id in ath12k_pdev wifi: ath12k: add panic handler wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity() wifi: brcm80211: remove unused structs wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type) wifi: ath12k: do not process consecutive RDDM event dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup() wifi: rtlwifi: handle return value of usb init TX/RX wifi: rtlwifi: Enable the new rtl8192du driver wifi: rtlwifi: Add rtl8192du/sw.c wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg wifi: rtlwifi: Add rtl8192du/dm.{c,h} wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h} wifi: rtlwifi: Add rtl8192du/rf.{c,h} wifi: rtlwifi: Add rtl8192du/trx.{c,h} wifi: rtlwifi: Add rtl8192du/phy.{c,h} wifi: rtlwifi: Add rtl8192du/hw.{c,h} wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU wifi: rtlwifi: Add rtl8192du/table.{c,h} ... Signed-off-by: Jakub Kicinski <kuba@kernel.org> ==================== Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-05Merge tag 'ath-next-20240605' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.11 ath12k * remove unsupported tx monitor handling * channel 2 in 6 GHz band support * Spatial Multiplexing Power Save (SMPS) in 6 GHz band support * multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support * dynamic VLAN support * add panic handler for resetting the firmware state ath10k * add qcom,no-msa-ready-indicator Device Tree property * LED support for various chipsets
2024-05-25wifi: ath11k: refactor setting country code logicBaochen Qiang
ath11k_wmi_send_set_current_country_cmd() is called in several places and all of them are just simply repeating the same logic. Refactor to make code clean. Compile tested only. Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240520024148.5472-2-quic_bqiang@quicinc.com
2024-05-23wifi: ath11k: move power type check to ASSOC stage when connecting to 6 GHz APBaochen Qiang
With commit bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") ath11k fails to connect to 6 GHz AP. This is because currently ath11k checks AP's power type in ath11k_mac_op_assign_vif_chanctx() which would be called in AUTH stage. However with above commit power type is not available until ASSOC stage. As a result power type check fails and therefore connection fails. Fix this by moving power type check to ASSOC stage, also move regulatory rules update there because it depends on power type. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: bc8a0fac8677 ("wifi: mac80211: don't set bss_conf in parsing") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240424064019.4847-1-quic_bqiang@quicinc.com
2024-05-23wifi: mac80211: pass parsed TPE data to driversJohannes Berg
Instead of passing the full TPE elements, in all their glory and mixed up data formats for HE backward compatibility, parse them fully into the right values, and pass that to the drivers. Also introduce proper validation already in mac80211, so that drivers don't need to do it, and parse the EHT portions. The code now passes the values in the right order according to the channel used by an interface, which could also be a subset of the data advertised by the AP, if we couldn't connect with the full bandwidth (for whatever reason.) Also add kunit tests for the more complicated bits of it. Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.2aa839969b60.I265b28209e0b29772b2f125f7f83de44a4da877b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: ath11k: fix TPE power levelsJohannes Berg
The chanctx can be shared, but it seems like the TPE values for this vif should only reflect the channel that the vif uses, which is captured in bss_conf->chanreq.oper rather than the chanctx. Use that when calculating defaults, a similar issue is where the data from the AP is processed, but I'm moving that to mac80211. Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.d99fcf5856b9.I359bb401ea74bf82dc981a86a7ca3fa44d169d2e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-23wifi: ieee80211/ath11k: remove IEEE80211_MAX_NUM_PWR_LEVELJohannes Berg
The define IEEE80211_MAX_NUM_PWR_LEVEL doesn't make much sense. Yes, that table has a maximum value of 8, and the table will actually remain that way, but EHT introduced a way to encode more levels for 320 MHz channels. Remove IEEE80211_MAX_NUM_PWR_LEVEL and, for ath11k being the only user, add ATH11K_NUM_PWR_LEVELS, where it makes sense since it cannot support 320 MHz channels. Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240506214536.9818e5471055.Icece7e47e963d6b68e0d97ba13c102b37fbaa689@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-05-13wifi: ath11k: fix misspelling of "dma" in num_rxmda_per_pdevJeff Johnson
The ath11k_hw_params member num_rxmda_per_pdev contains a misspelling of "dma" so fix it. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240504-ath11k-num_rxmda_per_pdev-v1-1-7f97bced8495@quicinc.com
2024-05-03wifi: ath11k: ath11k_mac_op_ipv6_changed(): use list_for_each_entry()Kalle Valo
Simplify the loop by using list_for_each_entry(). No functional changes. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://msgid.link/20240411165516.4070649-3-kvalo@kernel.org
2024-05-03Merge tag 'ath-next-20240502' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.10 ath12k * debugfs support * dfs_simulate_radar debugfs file * disable Wireless Extensions * suspend and hibernation support * ACPI support * refactoring in preparation of multi-link support ath11k * support hibernation (required changes in qrtr and MHI subsystems) * ieee80211-freq-limit Device Tree property support ath10k * firmware-name Device Tree property support
2024-05-03wifi: mac80211: handle color change per linkAditya Kumar Singh
In order to support color change with MLO, handle the link ID now passed from cfg80211, adjust the code to do everything per link and call the notifications to cfg80211 correctly. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240422053412.2024075-4-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-5-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-6-quic_adisi@quicinc.com Link: https://msgid.link/20240422053412.2024075-7-quic_adisi@quicinc.com [squash, move API call updates to this patch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/ti/icssg/icssg_prueth.c net/mac80211/chan.c 89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link") 87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()") https://lore.kernel.org/all/20240422105623.7b1fbda2@canb.auug.org.au/ net/unix/garbage.c 1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().") 4090fa373f0e ("af_unix: Replace garbage collection algorithm.") drivers/net/ethernet/ti/icssg/icssg_prueth.c drivers/net/ethernet/ti/icssg/icssg_common.c 4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()") e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file") No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18wifi: ath11k: add support DT ieee80211-freq-limitChristian Lamparter
The common DT property can be used to limit the available channels/frequencies. But ath11k has to manually call wiphy_read_of_freq_limits(). Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/ed266944c721de8dbf0fe35f387a3a71b2c84037.1686486468.git.chunkeey@gmail.com
2024-04-16wifi: ath11k: use RCU when accessing struct inet6_dev::ac_listKalle Valo
Commit c3718936ec47 ("ipv6: anycast: complete RCU handling of struct ifacaddr6") converted struct inet6_dev::ac_list to use RCU but missed that ath11k also accesses this list. Now sparse warns: drivers/net/wireless/ath/ath11k/mac.c:9145:21: warning: incorrect type in assignment (different address spaces) drivers/net/wireless/ath/ath11k/mac.c:9145:21: expected struct ifacaddr6 *ifaca6 drivers/net/wireless/ath/ath11k/mac.c:9145:21: got struct ifacaddr6 [noderef] __rcu *ac_list drivers/net/wireless/ath/ath11k/mac.c:9145:53: warning: incorrect type in assignment (different address spaces) drivers/net/wireless/ath/ath11k/mac.c:9145:53: expected struct ifacaddr6 *ifaca6 drivers/net/wireless/ath/ath11k/mac.c:9145:53: got struct ifacaddr6 [noderef] __rcu *aca_next Fix it by using rtnl_dereference(). Also add a note that read_lock_bh() calls rcu_read_lock() which I was not aware of. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Fixes: c3718936ec47 ("ipv6: anycast: complete RCU handling of struct ifacaddr6") Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://msgid.link/20240411165516.4070649-2-kvalo@kernel.org
2024-03-14wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066Kang Yang
Now that all the necessary pieces are implemented we can enable P2P support for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-7-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066Kang Yang
Current ROC scan will filter probe request. So P2P device cannot receive probe request. But it is necessary for P2P mode. A P2P device cannot be discovered if it doesn't respond to others' probe request. In addition, station won't filter probe request with common scan. But for station, there is no needed to receive probe request. Based on the above two points, change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-6-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: add P2P IE in beacon templateKang Yang
P2P Element is a necessary component of P2P protocol communication. It contains the Vendor Specific Information Element which includes the WFA OUI and an OUI Type indicating P2P. Add P2P IE in beacon template, and implement WMI interface for it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-3-quic_kangyang@quicinc.com
2024-03-14wifi: ath11k: change interface combination for P2P modeKang Yang
Current interface combination doesn't support P2P mode. So change it for P2P mode. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <quic_kangyang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240228093537.25052-2-quic_kangyang@quicinc.com
2024-03-12wifi: ath11k: don't force enable power save on non-running vdevsBaochen Qiang
Currently we force enable power save on non-running vdevs, this results in unexpected ping latency in below scenarios: 1. disable power save from userspace. 2. trigger suspend/resume. With step 1 power save is disabled successfully and we get a good latency: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms While after step 2, the latency becomes much larger: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms The reason is, with step 2, power save is force enabled due to vdev not running, although mac80211 was trying to disable it to honor userspace configuration: ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0 Call Trace: ath11k_wmi_pdev_set_ps_mode ath11k_mac_op_bss_info_changed ieee80211_bss_info_change_notify ieee80211_reconfig ieee80211_resume wiphy_resume This logic is taken from ath10k where it was added due to below comment: Firmware doesn't behave nicely and consumes more power than necessary if PS is disabled on a non-started vdev. However we don't know whether such an issue also occurs to ath11k firmware or not. But even if it does, it's not appropriate because it goes against userspace, even cfg/mac80211 don't know we have enabled it in fact. Remove it to fix this issue. In this way we not only get a better latency, but also, and the most important, keeps the consistency between userspace and kernel/driver. The biggest price for that would be the power consumption, which is not that important, compared with the consistency. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: b2beffa7d9a6 ("ath11k: enable 802.11 power save mode in station mode") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240309113115.11498-1-quic_bqiang@quicinc.com
2024-02-22Merge tag 'ath-next-20240222' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 We have support for QCA2066 now and also several new features in ath12k. Major changes: ath12k * firmware-2.bin support * support having multiple identical PCI devices (firmware needs to have ATH12K_FW_FEATURE_MULTI_QRTR_ID) * QCN9274: support split-PHY devices * WCN7850: enable Power Save Mode in station mode * WCN7850: P2P support ath11k: * QCA6390 & WCN6855: support 2 concurrent station interfaces * QCA2066 support
2024-02-21wifi: mac80211: check beacon countdown is complete on per link basisAditya Kumar Singh
Currently, function to check if beacon countdown is complete uses deflink to fetch the beacon and check the counter. However, with MLO, there is a need to check the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-15wifi: ath11k: provide address list if chip supports 2 stationsCarl Huang
Provide address list to mac80211 so user doesn't need to specify addresses when a second interface is added because the address can be allocated from the list by mac80211. The derived addresses have LAA (Local Administered Address) bit set, and only the first byte is changed. Take the 00:03:7f:xx:xx:xx as example to derive: addresses[0] is unchanged, it's still 00:03:7f:xx:xx:xx, addresses[1] is 02:03:7f:xx:xx:xx, addresses[2] is 12:03:7f:xx:xx:xx, addresses[3] is 22:03:7f:xx:xx:xx, addresses[4] is 32:03:7f:xx:xx:xx. However as only 3 addresses are reported now, so addresses[3] and addresses[4] aren't actually derived. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20230714023801.2621802-3-quic_cjhuang@quicinc.com
2024-02-15wifi: ath11k: support 2 station interfacesCarl Huang
Add hardware parameter support_dual_stations to indicate whether 2 station interfaces are supported. For chips which support this feature, limit total number of AP interface and mesh point to 1. The max interfaces are 3 for such chips. The chips affected are: QCA6390 hw2.0 WCN6855 hw2.0 WCN6855 hw2.1 Other chips are not affected. For affected chips, remove radar_detect_widths because now num_different_channels is set to 2. radar_detect_widths can be set only when num_different_channels is 1, see mac80211 function wiphy_verify_combinations for details. This means that in affectected chips DFS cannot be enabled in AP mode. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20230714023801.2621802-2-quic_cjhuang@quicinc.com
2024-02-14wifi: ath11k: Do not directly use scan_flags in struct scan_req_paramsNicolas Escande
As discussed in [1] lets not use WMI_SCAN_XXX defines in combination with scan_flags directly when setting scan params in struct scan_req_params but use the underlying bitfield. This bitfield is then converted to WMI_SCAN_XXX when filling the WMI command to send to the firmware. [1] https://lore.kernel.org/all/871qae51wx.fsf@kernel.org/ Tested-on: QCN9074 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 Signed-off-by: Nicolas Escande <nico.escande@gmail.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240209113536.266822-2-nico.escande@gmail.com
2024-02-08wifi: mac80211: update beacon counters per link basisAditya Kumar Singh
Currently, function to update beacon counter uses deflink to fetch the beacon and then update the counter. However, with MLO, there is a need to update the counter for the beacon in a particular link. Add support to use link_id in order to fetch the beacon from a particular link data during beacon update counter. Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Link: https://msgid.link/20240130140918.1172387-3-quic_adisi@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-07wifi: ath11k: Really consistently use ath11k_vif_to_arvif()Jeff Johnson
Commit 9476cda44c13 ("wifi: ath11k: Consistently use ath11k_vif_to_arvif()") previously replaced all open coding of the ath11k_vif_to_arvif() functionality. Subsequently two more instances of open coding were introduced, one in commit 92425f788fee ("wifi: ath11k: fill parameters for vdev set tpc power WMI command") and one in commit 6f4e235be655 ("wifi: ath11k: add parse of transmit power envelope element"), so fix those as well. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240205-ath11k_vif_to_arvif-v1-1-7c41313c8318@quicinc.com
2024-02-05wifi: ath11k: initialize eirp_power before useBaochen Qiang
Currently, at the end of ath11k_mac_fill_reg_tpc_info(), the reg_tpc_info struct is populated, including the following: reg_tpc_info->is_psd_power = is_psd_power; reg_tpc_info->eirp_power = eirp_power; Kernel test robot complains on uninitialized symbol: drivers/net/wireless/ath/ath11k/mac.c:7949 ath11k_mac_fill_reg_tpc_info() error: uninitialized symbol 'eirp_power'. This is because there are some code paths that never set eirp_power, so the assignment of reg_tpc_info->eirp_power can come from an uninitialized variable. Functionally this is OK since the eirp_power only has meaning when is_psd_power is true, and all code paths which set is_psd_power to true also set eirp_power. However, to keep the robot happy, always initialize eirp_power before use. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 92425f788fee ("wifi: ath11k: fill parameters for vdev set tpc power WMI command") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240202024011.11341-1-quic_bqiang@quicinc.com
2024-02-05wifi: ath11k: initialize rx_mcs_80 and rx_mcs_160 before useBaochen Qiang
Currently in ath11k_peer_assoc_h_he() rx_mcs_80 and rx_mcs_160 are used to calculate max_nss, see if (support_160) max_nss = min(rx_mcs_80, rx_mcs_160); else max_nss = rx_mcs_80; Kernel test robot complains on uninitialized symbols: drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. drivers/net/wireless/ath/ath11k/mac.c:2321 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_160'. drivers/net/wireless/ath/ath11k/mac.c:2323 ath11k_peer_assoc_h_he() error: uninitialized symbol 'rx_mcs_80'. This is because there are some code paths that never set them, so the assignment of max_nss can come from uninitialized variables. This could result in some unknown issues since a wrong peer_nss might be passed to firmware. Change to initialize them to an invalid value at the beginning. This makes sense because even max_nss gets an invalid value, due to either or both of them being invalid, we can get an valid peer_nss with following guard: arg->peer_nss = min(sta->deflink.rx_nss, max_nss) Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 3db26ecf7114 ("ath11k: calculate the correct NSS of peer for HE capabilities") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401311243.NyXwWZxP-lkp@intel.com/ Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240202023547.11141-1-quic_bqiang@quicinc.com
2024-02-02wifi: ath11k: change to move WMI_VDEV_PARAM_SET_HEMU_MODE before ↵Wen Gong
WMI_PEER_ASSOC_CMDID Currently when connecting to an AP with 11AX-HE phy mode, host sends WMI_VDEV_PARAM_SET_HEMU_MODE parameter to firmware after WMI_PEER_ASSOC_CMDID command. This results in TXBF not working, because firmware calculates TXBF values while handling WMI_PEER_ASSOC_CMDID, however at that time WMI_VDEV_PARAM_SET_HEMU_MODE has not been sent yet. See below log: AP sends "VHT/HE/EHT NDP Announcement" to station, and station sends "Action no Ack" of category code HE to AP, the "Nc Index" and "Codebook Information" are wrong: Issued action: IEEE 802.11 Action No Ack, Flags: ........ IEEE 802.11 wireless LAN Fixed parameters Category code: HE (30) HE Action: HE Compressed Beamforming And CQI (0) Total length: 152 HE MIMO Control: 0x0004008018 .... .... .... .... .... .... .... .... .... .000 = Nc Index: 1 Column (0) .... .... .... .... .... .... .... ..0. .... .... = Codebook Information: 0 Change to send WMI_VDEV_PARAM_SET_HEMU_MODE before WMI_PEER_ASSOC_CMDID, then firmware will calculate the TXBF values with valid parameters instead of empty values. TXBF works well and throughput performance is improved from 80 Mbps to 130 Mbps with this patch. Good action after this patch: IEEE 802.11 Action No Ack, Flags: ........ IEEE 802.11 wireless LAN Fixed parameters Category code: HE (30) HE Action: HE Compressed Beamforming And CQI (0) Total length: 409 HE MIMO Control: 0x0004008219 .... .... .... .... .... .... .... .... .... .001 = Nc Index: 2 Columns (1) .... .... .... .... .... .... .... ..1. .... .... = Codebook Information: 1 This change applies to all chipsets. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Fixes: 38dfe775d0ab ("wifi: ath11k: push MU-MIMO params from hostapd to hardware") Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240131021832.17298-1-quic_bqiang@quicinc.com
2024-01-31Merge tag 'ath-next-20240130' of ↵Kalle Valo
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 We have new features for both ath11k and ath12k. ath12k is now under heavy refactoring in preparation for MLO support. Major changes: ath12k * refactoring in preparation for Multi-Link Operation (MLO) support * 1024 Block Ack window size support * provide firmware wmi logs via a trace event ath11k * 36 bit DMA mask support * support 6 GHz station power modes: Low Power Indoor (LPI), Standard Power) SP and Very Low Power (VLP)
generated by cgit (git 2.34.1) at 2025-05-30 09:12:32 +0000