summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath12k/debugfs.c
AgeCommit message (Collapse)Author
2025-02-11wifi: ath12k: Add peer extended Rx statistics debugfs supportKarthikeyan Periyasamy
Currently, peer extended Rx statistics are not supported. Therefore, expose peer extended Rx statistics support through debugfs, allowing users to enable or disable the collection of statistics information. After that the statistics information can be dumped through debugfs. Below are the debugfs commands exposed. Enable/Disable: echo <1/0> > /sys/kernel/debug/ieee80211/phyX/ath12k/ext_rx_stats Dump: cat /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/stations/<peer MAC addr>/rx_stats Sample output: ============== RX peer stats: Num of MSDUs: 1087 Num of MSDUs with TCP L4: 0 Num of MSDUs with UDP L4: 13 Num of other MSDUs: 1074 Num of MSDUs part of AMPDU: 363 Num of MSDUs not part of AMPDU: 724 Num of MSDUs using STBC: 0 Num of MSDUs beamformed: 0 Num of MPDUs with FCS ok: 695 Num of MPDUs with FCS error: 0 preamble: 11A 395 11B 0 11N 0 11AC 0 11AX 692 11BE 0 reception type: SU 1087 MU_MIMO 0 MU_OFDMA 0 MU_OFDMA_MIMO 0 TID(0-15) Legacy TID(16):690 1 0 0 1 0 0 0 0 0 0 0 0 0 0 0 395 RX Duration:39537 DCM: 0 RU26: 0 RU52: 0 RU106: 0 RU242: 0 RU484: 0 RU996: 0 RX success packet stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 1 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 66 MCS 7: 46 MCS 8: 46 MCS 9: 34 MCS 10: 28 MCS 11: 471 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 395 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 1086 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 396 1.6 us 691 3.2 us 0 BW: 20 MHz 785 40 MHz 2 80 MHz 300 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:5 7:3 8:3 9:4 10:4 11:374 12:391 40 Mhz gi 1 us 1x1 : 12:2 80 Mhz gi 1 us 1x1 : 6:61 7:43 8:43 9:30 10:24 11:97 12:2 RX success byte stats: EHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 HE stats: MCS 0: 41 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 1435 MCS 7: 943 MCS 8: 697 MCS 9: 533 MCS 10: 492 MCS 11: 8159 VHT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 HT stats: MCS 0: 0 MCS 1: 0 MCS 2: 0 MCS 3: 0 MCS 4: 0 MCS 5: 0 MCS 6: 0 MCS 7: 0 MCS 8: 0 MCS 9: 0 MCS 10: 0 MCS 11: 0 MCS 12: 0 MCS 13: 0 MCS 14: 0 MCS 15: 0 MCS 16: 0 MCS 17: 0 MCS 18: 0 MCS 19: 0 MCS 20: 0 MCS 21: 0 MCS 22: 0 MCS 23: 0 MCS 24: 0 MCS 25: 0 MCS 26: 0 MCS 27: 0 MCS 28: 0 MCS 29: 0 MCS 30: 0 MCS 31: 0 Legacy stats: 1 Mbps: 0 2 Mbps: 0 5.5 Mbps: 0 6 Mbps: 16195 9 Mbps: 0 11 Mbps: 0 12 Mbps: 0 18 Mbps: 0 24 Mbps: 0 36 Mbps: 0 48 Mbps: 0 54 Mbps: 0 NSS stats: 1x1: 28454 2x2: 0 3x3: 0 4x4: 0 5x5: 0 6x6: 0 7x7: 0 8x8: 0 GI: 0.8 us 0 0.4 us 16236 1.6 us 12259 3.2 us 0 BW: 20 MHz 24108 40 MHz 82 80 MHz 4305 160 MHz 0 320 MHz 0 20 Mhz gi 1 us 1x1 : 6:205 7:123 8:123 9:164 10:164 11:7257 12:16031 40 Mhz gi 1 us 1x1 : 12:82 80 Mhz gi 1 us 1x1 : 6:1230 7:820 8:574 9:369 10:328 11:902 12:82 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com> Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Link: https://patch.msgid.link/20250206013854.174765-10-quic_periyasa@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add Support to Calculate and Display TPC ValuesSowmiya Sree Elavalagan
Transmit Power Control(TPC) stats should display per chain TPC value per radio. Add debugfs support to read and display TPC stats type and TPC stats. Take power values for each preamble type, rate and NSS combination from a particular index from each power arrays based on number of chains, NSS, modes, MCS and tx beamforming enabled/disabled parameters. Minimum of the values taken from reg power table, rates and Conformance Test Limit(CTL) array table should give the TPC which is in 0.25 dBm steps. Sample Output: ------------- echo 1 > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats_type cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats *************** TPC config ************** * powers are in 0.25 dBm steps reg domain-22 chan freq-5955 power limit-126 max reg-domain Power-252 No.of tx chain-4 No.of rates-1164 **************** SU WITH TXBF **************** TPC values for Active chains Rate idx Preamble Rate code 1-Chain 2-Chain 3-Chain 4-Chain 4 OFDM 0x000 39 15 1 -9 5 OFDM 0x001 39 15 1 -9 ..... 12 HT20 0x200 40 16 2 -8 13 HT20 0x201 40 16 2 -8 ..... 44 HT40 0x200 88 88 88 88 45 HT40 0x201 88 88 88 88 ..... 76 VHT20 0x300 40 16 2 -8 77 VHT20 0x301 40 16 2 -8 ..... 172 VHT40 0x300 88 88 88 88 173 VHT40 0x301 88 88 88 88 ..... 412 HE20 0x400 88 88 88 88 413 HE20 0x401 88 88 88 88 ..... 508 HE40 0x400 76 76 76 76 509 HE40 0x401 76 76 76 76 ..... 748 EHT20 0x50e 88 88 88 88 749 EHT20 0x50f 88 88 88 88 ..... 812 EHT40 0x50e 88 88 88 88 813 EHT40 0x50f 88 88 88 88 ..... Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250130061104.962124-3-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-02-03wifi: ath12k: Add Support to Parse TPC Event from FirmwareSowmiya Sree Elavalagan
Host receives four Transmit Power Control(TPC) events from firmware on sending TPC request. Fixed param TLV is present as part of all event to indicate the event count and end of event. TPC config parameters along with regulatory power array comes as first event. Rates array comes as second and third event as it cannot be packed in single event. Conformance Test Limit (CTL) power array comes as the fourth event. Firmware packs different sets of array params which includes array length and type inside master TLV as different subtlvs. And the actual content of array is packed one after the other inside a separate TLV as single buffer. Parse various events and save it in local structures. Create tpc_stats file using debugfs to store these local structures. Create function to handle TPC stats read to relay the information to the user. Command usage: cat > /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/tpc_stats Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00214-QCAHKSWPL_SILICONZ-1 Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250130061104.962124-2-quic_rdevanat@quicinc.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request pdev stats from firmwareRamya Gnanasekar
Add support to request pdev stats from firmware through WMI and print the information Sample Output: ------------- cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/fw_stats/pdev_stats ath12k PDEV stats ================= Channel noise floor -85 Channel TX power 126 TX frame count 0 RX frame count 8637 RX clear count 37424 Cycle count 4372024 PHY error count 0 soc drop count 0 ath12k PDEV TX stats ==================== HTT cookies queued 0 HTT cookies disp. 0 MSDU queued 0 MPDU queued 0 MSDUs dropped 0 Local enqued 0 Local freed 0 HW queued 0 PPDUs reaped 0 Num underruns 0 PPDUs cleaned 0 MPDUs requeued 0 Excessive retries 0 HW rate 0 Sched self triggers 0 Dropped due to SW retries 0 Illegal rate phy errors 0 PDEV continuous xretry 0 TX timeout 9 PDEV resets 0 Stateless TIDs alloc failures 0 PHY underrun 0 MPDU is more than txop limit 0 ath12k PDEV RX stats ==================== Mid PPDU route change 0 Tot. number of statuses 0 Extra frags on rings 0 0 Extra frags on rings 1 0 Extra frags on rings 2 0 Extra frags on rings 3 0 MSDUs delivered to HTT 0 MPDUs delivered to HTT 0 MSDUs delivered to stack 0 MPDUs delivered to stack 0 Oversized AMSUs 0 PHY errors 0 PHY errors drops 0 MPDU errors (FCS, MIC, ENC) 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-4-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request beacon stats from firmwareRamya Gnanasekar
Add support to request and dump beacon statistics from firmware Sample output: ------------- cat /sys/kernel/debug/ath12k/pci-0000:06:00.0/mac0/fw_stats/beacon_stats ath12k Beacon stats (1) =================== VDEV ID 0 VDEV MAC address 00:03:7f:04:37:58 ================ Num of beacon tx success 20 Num of beacon tx failures 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-3-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2025-01-26wifi: ath12k: Request vdev stats from firmwareRamya Gnanasekar
Add support to request and print vdev stats from firmware through WMI. Sample output: ------------- cat /sys/kernel/debug/ath12k/pci-0000\:06\:00.0/mac0/fw_stats/vdev_stats ath12k VDEV stats ================= VDEV ID 0 VDEV MAC address 00:03:7f:6c:9c:1a beacon snr 96 data snr 255 num rx frames 0 num rts fail 0 num rts success 0 num rx err 0 num rx discard 0 num tx not acked 0 num tx frames [00] 0 num tx frames [01] 0 num tx frames [02] 0 num tx frames [03] 2 num tx frames retries [00] 0 num tx frames retries [01] 0 num tx frames retries [02] 0 num tx frames retries [03] 0 num tx frames failures [00] 0 num tx frames failures [01] 0 num tx frames failures [02] 0 num tx frames failures [03] 0 tx rate history [00] 0x00000000 tx rate history [01] 0x00000000 tx rate history [02] 0x00000000 tx rate history [03] 0x00000000 tx rate history [04] 0x00000000 tx rate history [05] 0x00000000 tx rate history [06] 0x00000000 tx rate history [07] 0x00000000 tx rate history [08] 0x00000000 tx rate history [09] 0x00000000 beacon rssi history [00] 0 beacon rssi history [01] 0 beacon rssi history [02] 0 beacon rssi history [03] 0 beacon rssi history [04] 0 beacon rssi history [05] 0 beacon rssi history [06] 0 beacon rssi history [07] 0 beacon rssi history [08] 0 beacon rssi history [09] 0 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com> Reviewed-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com> Link: https://patch.msgid.link/20250124185330.1244585-2-ramya.gnanasekar@oss.qualcomm.com Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
2024-10-11wifi: ath12k: switch to using wiphy_lock() and remove ar->conf_mutexKalle Valo
Switch from using driver specific ar->conf_mutex to wiphy->mtx. The benefits are: * one lock less and simplified locking * possibility to use wiphy_work_queue() without other locks Most of the mac80211 ops are called within wiphy_lock(), most notable exception being tx op. This can be checked with lockdep_assert_wiphy() from net/mac80211/driver-ops.[ch] and I veried that by manually going through all the ops in ath12k_ops which had lockdep_assert_wiphy(). The conversion was simple: * All conf_mutex lock() and unlock() calls which already were called under wiphy_lock() I replaced with lockdep_assert_wiphy(). * The rest of conf_mutex calls I replaced with wiphy_lock() and wiphy_unlock(). * All lockdep_asset_held(conf_mutex) calls I replaced with lockdep_assert_wiphy(). One exception was in ath12k_core_post_reconfigure_recovery() where the wiphy lock needs to be taken before hw_mutex to avoid a lockdep warning. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20241007165932.78081-4-kvalo@kernel.org Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
2024-07-01wifi: ath12k: Add support to enable debugfs_htt_statsDinesh Karthikeyan
Create debugfs_htt_stats file when ath12k debugfs support is enabled. Add basic ath12k_debugfs_htt_stats_register and handle htt_stats_type file operations. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://patch.msgid.link/20240626085854.2500681-2-quic_rgnanase@quicinc.com
2024-06-11wifi: ath12k: handle symlink cleanup for per pdev debugfs dentryAditya Kumar Singh
Whenever per pdev debugfs directory is created, a symlink to it is also placed in ieee80211/phy* directory. During clean up of per pdev debugfs, this symlink also needs to be cleaned up. Add changes to clean up the symlink whenever the per pdev debugfs is removed. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529043043.2488031-4-quic_adisi@quicinc.com
2024-06-11wifi: ath12k: unregister per pdev debugfsAditya Kumar Singh
During normal de-initialization path or if any error happens while registering the hardware, there is no support to unregister the per pdev debugfs. Add support for the same. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240529043043.2488031-3-quic_adisi@quicinc.com
2024-04-04wifi: ath12k: debugfs: radar simulation supportRamya Gnanasekar
Create dfs_simulate_radar debugfs in ath12k debugfs directory. Usage: echo 1 > /sys/kernel/debug/ath12k/pci-0000:06:00.0/mac0/dfs_simulate_radar This debugfs helps user to simulate RADAR interference in run time. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240320171305.655288-3-quic_rgnanase@quicinc.com
2024-04-04wifi: ath12k: initial debugfs supportRamasamy Kaliappan
The initial debugfs infra bringup in ath12k driver and create the ath12k debugfs and soc-specific directories in /sys/kernel/debug/ For each ath12k device, directory will be created in <bus>-<devname> schema under ath12k root directory. Example with one ath12k device: /sys/kernel/debug/ath12k/pci-0000:06:00.0 ath12k `-- pci-0000:06:00.0 |-- mac0 To enable ath12k debugfs support (CONFIG_ATH12K_DEBUGFS=y) Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240320171305.655288-2-quic_rgnanase@quicinc.com
generated by cgit (git 2.34.1) at 2025-04-21 20:30:50 +0000