summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/mwifiex/sta_cmd.c
AgeCommit message (Collapse)Author
2015-11-18mwifiex: move under marvell vendor directoryKalle Valo
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14mwifiex: control WLAN and bluetooth coexistence modesAmitkumar Karwar
By default our chip will be in spatial coexistence mode. This patch adds a provision to change it to timeshare mode via debugfs command. Enable timeshare coexistence mode echo 1 > /sys/kernel/debug/mwifiex/mlan0/timeshare_coex Go back to spacial coexistence mode echo 0 > /sys/kernel/debug/mwifiex/mlan0/timeshare_coex Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-09-29mwifiex: fix driver init failure under memory pressureXinming Hu
64k Tx and Rx buffers are allocated during driver initialization for SDIO level data aggregations. When host is under memory pressure situation, kzalloc() request for 64k may fail. We will try allocating 32k buffers and disable our rx single port aggreagation feature in this situation. If the allocation still fails, we will disable our sdio multport aggregation feature as well. In this way, we will transmit and receive packets one by one, thus reduce the demand for big memory. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: fix for p2p broken linkAniket Nagarnaik
This patch fixes following issues in p2p code paths. 1) bss role, bss type and connection type was not set correctly for p2p GO and p2p client at couple of places. 2) Driver appends a proprietary header to management frames which will be parsed by our firmware. Later while informing TX status to cfg80211, modified frame buffer was passed to cfg80211_mgmt_tx_status() instead of original one. Signed-off-by: Aniket Nagarnaik <aniketn@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: advertise multichannel support to cfg80211Avinash Patil
This patch adds support to advetise mwifiex multichannel support to cfg80211. If module parameter drcs is enabled and FW supports multichannel operation we advertise this support to cfg80211. As of now 2 simultaneous channels are supported. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: support to set multichannel policy to FWAvinash Patil
This patch adds support for setting multichannel policy as module parameter to FW. Value of 1 indicates Multichannel support is enabled and value of 0 disables it. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-07-21mwifiex: add tdls config commandXinming Hu
This patch add support for a new tdls configuration command which is used for configuration of tdls channel switch parameters. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: change dbg print func to mwifiex_dbgZhaoyang Liu
This patch changes all debug print functions from dev_dbg/dev_err/dev_info to mwifiex specific debug functions. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-05-26mwifiex: add support for FW memory read/write operationsChin-ran Lo
This patch adds support for FW memory read/write operations via debugfs. This is useful during debugging FW issues. Examples: For reading FW memory location: echo r 0x01ac > /sys/kernel/debug/mwifiex/mlan0/memrw cat /sys/kernel/debug/mwifiex/mlan0/memrw For writing FW memory location: echo w 0x01ac 0x55aa > /sys/kernel/debug/mwifiex/mlan0/memrw Signed-off-by: Chin-ran Lo <crlo@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: add SDIO rx single port aggregationZhaoyang Liu
This patch brings in support for SDIO single port rx aggregation to mwifiex. Maximum read size support by SDIO cmd53 is 64K. Based on multi port aggregation which is already part of mwifiex, idea here is multiple packets received in FW can be aggregated into single buffer. A separate upload type is defined for such packet aggregated to single port. Packets from this single buffer are later deaggregated into individual packets. This way, driver can receive more packets each time through single SDIO cmd53; thereby reducing no of times MMC bus is accessed. SDIO SP aggregation support is advertised by FW during load time and driver would get FW block size in command response of HostCmd_CMD_SDIO_SP_RX_AGGR_CFG. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Marc Yang <yangyang@marvell.com> Reviewed-by: Amitkumar Karwar <akarwar@marvell.com> Reviewed-by: Cathy Luo <cluo@marvell.com> Reviewed-by: Avinash Patil <patila@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-16mwifiex: Add support for auto ARP in mwifiex.Maithili Hinge
This patch adds support for auto ARP feature in mwifiex. The device will respond to ARP requests from the network with ARP response in suspended state without waking up the host. This feature is enabled in the driver by default. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: add cfg80211 start_radar_detection handlerAvinash Patil
This patch adds support for cfg80211 start_radar_detection handler. Upon reception of start_radar_detection, driver prepares radar detect command to FW. Delayed work is queued for CAC time which sends radar detection finished event to cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Qingshui Gao <gaoqs@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-29mwifiex: add init parameter to init command routineAvinash Patil
FW initialization routine can also be called while changing virtual interface types. This patch adds bool parameter "init" to init command routine so as to differentiate between initialization during driver load and change virtual interface handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-01-06mwifiex: module parameter for deep sleep configurationAvinash Patil
This patch adds module parameter for auto deepsleep configuration. By default, module_param is 0 and auto deep sleep is enabled. If mwifiex driver is loaded with disable_auto_ds=1, deep sleep configuration would not be downloaded to FW and FW would not enter deepsleep upon initializing. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2014-09-30mwifiex: add client mac address while configuring keys on GO.Maithili Hinge
When mwifiex device becomes GO, unicast traffic between client1 and GO stops when client2 connects to GO. Reason behind this was PTK getting overwritten by key_material command for client2 as it did not have client mac address. So, client1 can no more decode GO's ping packets though it responds to its broadcast packets. This patch adds case to check for BSS_ROLE instead of bss_type to set client mac address while configuring keys when device becomes GO. Signed-off-by: Maithili Hinge <maithili@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28mwifiex: rename macro and variables related to API revisionAmitkumar Karwar
We will remove 'fw' prefix from these variable and macro names and make them generic. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: define TDLS idle timeout macro with unitsBing Zhao
The unit of this timeout is in seconds. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25mwifiex: update Copyright to 2014Xinming Hu
This patch updates mwifiex Copyright to 2014. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-07mwifiex: configure inactivity timeout for TDLS linkAvinash Patil
This patch adds configuration timeout for TDLS link. This is configuered at the time of TDLS link configuration. If TDLS link is inactive for more than timeout, FW will tear this link. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-03-14mwifiex: add VHT MCS rate configuration supportAmitkumar Karwar
During Tx rate configuration, newer firmware V15 expects bitmap for VHT MCS rates as well. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-28mwifiex: remove global variable cmd_wait_q_requiredBing Zhao
There is a race condition while queuing synchronous command and asynchronous command requested from different threads, because the wait_q_enabled flag is set based on a global variable cmd_wait_q_required. The issue is fixed by removing this global variable and using a unified function with an argument 'sync' passed into the function. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add key material v2 supportAvinash Patil
This patch adds key material V2 support to mwifiex. Newer FW supports this feature and FW KEY API version is used to determine which command structure needs to be used. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add VHT support for TDLSAvinash Patil
During TDLS setup request/response, if HW is 11ac capable, we add VHT Capability IEs in outgoing data frame. Also while processing received setup request/response, we preserve peer's 11ac capability retrieved from IEs. Patch also gets VHT parameters from config_station handlers and sets it to FW using TDLS config command. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add cfg80211 change_station handler supportAvinash Patil
This patch adds cfg80211 change_station handler support for mwifiex which is needed for TDLS link setup. Driver creates a command to modify peer link capabilities and issues command to FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add cfg80211 add_station handler supportAvinash Patil
This patch adds cfg80211 add_station handler support for mwifiex which is needed for TDLS setup. Driver issues create TDLS link command to FW upon receiving add_station from cfg80211. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: add cfg80211 tdls_oper handler supportAvinash Patil
This patch adds cfg80211 handler tdls_oper handler support to mwifiex. Upon enable link, driver sets status as TDLS status as setup complete and also sets AMSDU size, AMPDU params for direct link. Upon disable link, driver issues command to FW to delete this link in FW. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-12mwifiex: implement extended scan featureAmitkumar Karwar
In extended scan, host gets scan results through one or multiple events instead of scan command response. Host will send next scan command when all the events are received. Legacy scan sometimes truncates scan results in a noisy environment due to buffer length limitation. This issue is addressed in extended scan. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-09mwifiex: fix potential buffer overflow in dt configurationBing Zhao
If cfgdata length exceeds the command buffer size we will end up getting buffer overflow problem. Fix it by checking the buffer size less the command header length. Reviewed-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18mwifiex: download per country tx power table to firmwareBing Zhao
When driver gets regulatory domain change notifications or before associates to an AP with Country IE, the txpwrlimit table stored in device tree for that country is downloaded to firmware. The txpwrlimit downloading will happen only at the first time when the alpha2 country code is changed. World regulatory domain "00" notification doesn't trigger the downloading. This behavior is same as domain_info command. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18mwifiex: download cal-data from device-tree to firmwareBing Zhao
Currently only conf file based cal-data downloading is supported. On embedded platforms a better place to store the cal-data is in device tree. Add cal-data downloading from device tree to firmware. Both methods can co-exist. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-18mwifiex: remove cfg_data constructionBing Zhao
The cfg_data buffer will include the cfg_data structure header (action, type, data_len). This makes it work for all data types without extra parsing. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-09mwifiex: use little-endian variables in firmware structuresUjjal Roy
The firmware expects the command structure members in little endianness. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-11-11mwifiex: replace u16 with __le16 in struct mwifiex_types_power_groupAmitkumar Karwar
__le16 to u16 conversion is missing for "pg_tlv_hdr->length" in mwifiex_get_power_level(). This creates a problem on big endian machines. It is resolved by changing definition of the structure and making required endianness changes. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-10mwifiex: Change variable type to boolPeter Senna Tschudin
The variables cancel_scan_cmd, enable_data, hs_activate and valid are only assigned the values true and false. Change its type to bool. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @exists@ type T; identifier b; @@ - T + bool b = ...; ... when any b = \(true\|false\) Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: add packet coalesce supportAmitkumar Karwar
Coalesce filters are configured in firmware based on settings received from cfg80211. Packet type which is required by firmware is determined based on provided patterns in a rule: Unicast: if pattern '01' with offset 0 is found Multicast: if pattern '33:33' or '01:00:5e' with offset 0 is found Broadcast: if pattern 'ff:ff:ff:ff' with offset 0 is found Some example coalesce configuration files: 1) Coalesce Rx data packets from 192.168.0.88 mac address of our device is 00:50:43:21:53:7A Source IP address offset comes out as 52 after following calculations: 32 bytes of HW 802.11 header + 8 bytes LLC + 12 bytes in IPV4 header till source IP address Destination mac is at offset 6 in HW header. delay=100 condition=1 patterns=01,6+00:50:43:22,10+53:7A,52+c0:a8:00:58 2) Coalesce all broadcast and multicast packets(Multiple packet types are not allowed in a single rule. Hence created separate rules) delay=400 condition=1 patterns=33:33 delay=400 condition=1 patterns=ff:ff:ff:ff Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-08-09mwifiex: rename mef macrosAmitkumar Karwar
Their names were generic. We need to define similar macros for coalesce feature. Hence they are renamed here. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-07-24mwifiex: remove duplicate structure host_cmd_tlvAmitkumar Karwar
We already have 'struct mwifiex_ie_types_header' with same definition. Hence host_cmd_tlv is removed in this patch. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-05-22mwifiex: add calibration data download featureAmitkumar Karwar
User can provide a text file containing calibration data in hex format while loading mwifiex module. It will be downloaded to firmware. eg. insmod mwifiex.ko cal_data_cfg=cal_data.conf Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-25mwifiex: add support to configure VHT for AP modeYogesh Ashok Powar
Currently, default VHT configuration from the firmware is used for the VHT operations. Adding vhtcfg command to configure the firmware based on input received from cfg. Enable VHT for AP mode only when cfg80211_ap_settings has a VHT IE i.e., when ieee80211ac is set to 1 in the hostapd.conf. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: add WOWLAN supportAmitkumar Karwar
Currently 'magic-packet' and 'patterns' options in 'iw wowlan' command are supported. Appropriate packet filters for wowlan are configured in firmware based on provided patterns and/or magic-packet option. For examples, wake-on ARP request for 192.168.0.100: iw phy0 wowlan enable patterns ff:ff:ff:ff:ff:ff 20+08:06 46+c0:a8:00:64 wake-on RX packets sent from IP address 192.168.0.88: iw phy0 wowlan enable patterns 34+c0:a8:00:58 wake-on RX packets with TCP destination port 80 iw phy0 wowlan enable patterns 44+50 wake-on MagicPacket: iw phy0 wowlan enable magic-packet wake-on MagicPacket or patterns: iw phy0 wowlan enable magic-packet patterns 12+00:11:22:33:44:55 18+00:50:43:21 wake-on IPv4 multicast packets: iw phy0 wowlan enable patterns 01:00:5e wake-on IPv6 multicast packets: iw phy0 wowlan enable patterns 33:33 disable all wowlan options iw phy0 wowlan disable Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-03-06mwifiex: shorten the host sleep configuration macro namesAmitkumar Karwar
As we are adding a few more macros in this category in next patch, this cleanup work is required. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-02-18mwifiex: add 802.11AC supportYogesh Ashok Powar
For STA mode, collect VHT realated IEs from the Beacons or Probe Responses and append similar VHT related IEs to association requests. For AP mode, get VHT related capability information and share it with cfg80211 at the time of wiphy register. This information is further used by cfg80211 and hostapd to start an AP with 802.11AC support. Currently only 8897 supports 802.11AC. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-07mwifiex: use pci_alloc/free_consistent APIs for PCIeAvinash Patil
This patch uses pci_alloc_consistent and pci_free_consistent APIs for mwifiex_pcie driver. Consistent DMA memory is allocated for TX, RX and event rings. Command buffer and command response buffer also uses map/unmap memory APIs to download commands and get command responses. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P GO in interface type changeStone Piao
When cfg80211 calls to change interface type for P2P GO, send P2P mode config commands to firmware and set bss role and bss mode accordingly. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: add support for P2P client in interface type changeStone Piao
When cfg80211 calls to change interface type for P2P client, send P2P mode config commands to firmware. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: send firmware initialization commands synchronouslyStone Piao
The driver will send some commands to firmware during the initialization. Currently these commands are sent asynchronously, which means that we firstly insert all of them to a pre-allocated command queue, and then start to process them one by one. The command queue will soon be exhausted if we keep adding new initialization commands. This issue can be resolved by sending initialization commands synchronously because each command is consumed and the buffer is recycled before queuing next command. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement remain_on_channel and cancel_remain_on_channelStone Piao
Add a new command to implement remain_on_channel and cancel_remain_on_channel. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-28mwifiex: implement cfg80211 mgmt_frame_register handlerStone Piao
Add a new command to implement mgmt_frame_register. Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07mwifiex: use is_broadcast_ether_addr() instead of memcmp()Wei Yongjun
Using is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is broadcast address. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-10mwifiex: fix 'smatch' warning in preparing key_material cmdBing Zhao
The key length can be 32 bytes for TKIP and 16 bytes for AES_CMAC. 'smatch' warns on memcpy using key_len variable to copy data to a 16 bytes buffer. Use fixed length to avoid the warning. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit (git 2.34.1) at 2025-04-28 23:36:15 +0000