summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.h
AgeCommit message (Collapse)Author
2020-01-26rtlwifi: btcoex: fix spelling mistake "initilized" -> "initialized"Colin Ian King
There is a spelling mistake in one of the fields in the btc_coexist struct, fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-28rtlwifi: btcoex: remove unused function exhalbtc_stack_operation_notifyYueHaibing
There is no callers in tree, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-19rtlwifi: btcoex: Replace old-style license informationLarry Finger
The old-style license information is replaced by the SPDX form. There are no code changes. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add new but dummy definitions introduced by 8822bPing-Ke Shih
btcoex support multiple platforms, but this drivers doesn't support full functions yet, so this commit adds dummy definitions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: new definitions introduced by 8822bePing-Ke Shih
New constant and variables definitions are used by btcoex of 8822b, so this commit add them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: add assoc type v2 to connection notifyPing-Ke Shih
In connection notify v1, btcoex only need to know start/end association, and it will discriminate 2G and 5G band in v2. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add pre- and post- normal LPS functionPing-Ke Shih
Normal LPS is decomposed into pre- and post- parts, so we can issue H2C with TDMA parameters in the "critical section" that dirver can't change LPS state at the moment. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add interaction with phydmPing-Ke Shih
Get phydm's counter and version from the module phydm that is not submitted so we implement dummy functions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add rate table for the use of btcoexPing-Ke Shih
The btcoex use the rate to rsolve IOT issue that some APs reduce TX rate quickly, so it uses the RX rate as a clue to decide TDMA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger#lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Get status of multichannel concurrencePing-Ke Shih
btcoex does different decision according to MCC or SCC status, but driver is still SCC currently. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-03-27rtlwifi: btcoex: Add customer_id to do special deal to oem vendorPing-Ke Shih
Add customer_id field in structure, and then this is a clue to implement the behavior defined by vendor LENOVO_CHINA. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-27rtlwifi: btcoex: add routine to set default port idPing-Ke Shih
Tell wifi and BT firmware the default port ID to set multiports' state properly, but only 8822be needs this function currently. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-25rtlwifi: btcoex: Fix some static warnings from SparsePing-Ke Shih
Add 'static' or declaration to resolve the warnings, and remove two unused functions halbtc_set_macreg() and halbtc_get_macreg() exposed when they were made static. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: add boolean variables dbg_modePing-Ke Shih
In files halbtc8822b1ant.c and halbtc8822b2ant.c that I will submit later, two undesired directives named BT_8822B_1ANT_COEX_DBG and BT_8822B_2ANT_COEX_DBG will be replaced by boolean variables. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: Add wifi_only series ops to control solo cardPing-Ke Shih
Originally, btcoex controls the antenna of combo card, but solo card is also needed to setup properly. The new ops are named with suffix '_wifi_only' opposited to original btc_ops, and new structures and definitions are also introduced. The wifi_only oly contains four ops that are initial variable, hw config, scan notify, and switch band notify. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: Add variable ant_div_cfg to support antenna diversityPing-Ke Shih
The variable will be used by btcoex of 8822be, so we prepare this variable in advance. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: Add switch band notify for btcPing-Ke Shih
BT shares 2.4G band but not 5G band, so inform current band to btcoex to setup antenna properly. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-24rtlwifi: btcoex: extend get_wifi_bw to support bandwidth 80MPing-Ke Shih
The rtlwifi newer ICs support 80M bandwidth in 5G band, so extend get_wifi_bw() to know bandwidth 80M that helps btcoex to make correct decisions. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-17rtlwifi: btcoex: add rfe_type parameter to btcoexPing-Ke Shih
btcoex configure antenna by rfe_type that is RF type programmed in efuse. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-17rtlwifi: btcoex: Add common function for qeurying BT informationPing-Ke Shih
This commit implement the common function to sort old features, and add more new features that are get_supported_feature, get_supported_version, get_ant_det_val, ble_scan_type, ble_scan_para, bt_dev_info, forbidden_slot_val, afh_map and etc. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-17rtlwifi: btcoex: Remove typedef statementsLarry Finger
Each of these typedefs are only referenced in a single location later in this header. Thus, they are easily removed. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-17rtlwifi: btcoex: Remove global variables from btcoexPing-Ke Shih
Remove global variables, so btcoexist can support multiple instances simultaneously. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-17rtlwifi: btcoex: Add power_on_setting routinePing-Ke Shih
After mac power-on sequence, wifi will start to work so notify btcoex the event to configure registers especially related to antenna. This will not only help to assign antenna but also to yield better user experience. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: btcoex: Use seq_file to dump btcoex statusPing-Ke Shih
We use seq_file to replace RT_TRACE to dump status, then we can use 'cat' to access btcoex's status through debugfs. (i.e. /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/btcoex) Other related changes are 1. implement btc_disp_dbg_msg() to access btcoex's common status. 2. remove obsolete field bt_exist Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-01-08rtlwifi: Improve debugging by using debugfsPing-Ke Shih
Use debugfs to dump register and btcoex status, and also write registers and h2c. We create topdir in /sys/kernel/debug/rtlwifi/, and use the MAC address as subdirectory with several entries to dump mac_reg, bb_reg, rf_reg etc. An example is /sys/kernel/debug/rtlwifi/00-11-22-33-44-55-66/mac_0 This change permits examination of device registers in a dynamic manner, a feature not available with the current debug mechanism. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: btcoex: set correct interface type and parameter.Ping-Ke Shih
This commit fixies two problems. The first one is interface types (e.g. PCI) that are used to switch antenna, and the second is to add wifi_only parameter to give correct state. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-21rtlwifi: btcoex: call bind to setup btcoexPing-Ke Shih
New btcoex add a function 'bind' to connect adapter, so we should call it during initializing. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: let btcoex get wifi rssi and link statusYan-Hsuan Chuang
Instead of rssi status, the btcoex also needs to get the link status of the wifi. In addition, some of the rssi status can be merged into link status. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: bind BT coex information with wifi driverYan-Hsuan Chuang
When initializing, gather BT information in struct btcoexist and provide them to wifi driver. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: add settings before the hardware is readyYan-Hsuan Chuang
When the hardware is turned on and in the initialization stage, the PTA circuit is unstable. Hence we need to force some hardware settings to make sure the PTA circuit work correctly, otherwise it may affect the user's experience. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-06-13rtlwifi: btcoex: settings before firmware is downloadedYan-Hsuan Chuang
The btcoex is sometimes unstable because there are some unexpected behaviors before the firmware has been downloaded successfully. Therefore we force the antenna path settings to avoid this, then let the firmware control the btcoexistence when the firmware is ready. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: turn off ps and tdma mechanism when concurrent modeYan-Hsuan Chuang
When wifi is under concurrent mode, we can not distinguish if it is the real PS or just a fake one by sending null data, so we turn it off in case of miracast scenario. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-24rtlwifi: btcoex: 23b 1ant: Add rf status notificationPing-Ke Shih
If driver announce wifi RF status is off, btc can switch antenna to BT. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-18rtlwifi: btcoex: 23b 1ant: check if BT high priority packet existPing-Ke Shih
If there are BT high priority packets, we arrange more time to BT. To make user experience to be better, HID and SCO are also seen as high priority packet exist. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-05-18rtlwifi: btcoex: Remove 21a 1ant configuration parameterLarry Finger
In file halbtc8821a1ant.c, there are directives that depend on an undocumented configuration parameter BT_AUTO_REPORT_ONLY_8821A_1ANT that cannot be set from Kconfig. This parameter is replaced by a boolean in the main structure used by all routines. It still cannot be changed dynamically, but it is easier to document. Using a suggestion from Realtek, the auto report is turned on with this patch. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: notify more bt informationYan-Hsuan Chuang
These bt information are displayed in display coex Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: before firmware ready settingsYan-Hsuan Chuang
Before firmware is ready, set GNT_BT to high to let bt transmit Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: power on settings for coexYan-Hsuan Chuang
When power on, the wifi could be initiating, force the antenna to transmit bt packets to avoid bt unstable problems Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: wifi is not actually off in mp modeYan-Hsuan Chuang
In mp mode, the wifi will not turn off and still has control of the PTA, so the driver needs to distinguish whether it is mp mode or not Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-13rtlwifi: btcoex: 23b 2ant: turn off ps and tdma mechanism when in concurrent ↵Yan-Hsuan Chuang
mode When wifi is in concurrent mode, we can not distinguish if it is the real PS or just a fake one by sending null data, so we turn it off in case of miracast scenario. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05rtlwifi: btcoex: 23b 2ant: detect if bt is slave, and modify tdmaYan-Hsuan Chuang
if the bt is slave, it may receive packet at any time, so we need to mark them as high priority packets to avoid packet loss. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-05rtlwifi: btcoex: follow linux coding styleYan-Hsuan Chuang
Fix a number of checkpatch.pl warnings. In addition, some variable and function names are shortened, and/or renamed to be more consistent. Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Pkshih <pkshih@realtek.com> Cc: Birming Chiu <birming@realtek.com> Cc: Shaofu <shaofu@realtek.com> Cc: Steven Ting <steventing@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Convert halbtcoutsrc.c to use standard debuggingLarry Finger
The routines in btcoexist use different debugging routines than are used in the other drivers. This patch converts halbtcoutsrc.c to use the standard routines. It also deletes the definitions of the now-unused debugging macros, and turns on compilation of all the routines in btcoexist. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: btcoexist: Add vendor definition for new btcoexistPing-Ke Shih
Routine halbtc_get() will need to be able to get the vendor ID. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-02-07rtlwifi: Add a new enumeration value to btc_set_typePing-Ke Shih
The new value is needed for future capability. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-06-29rtlwifi: use s8 instead of charArnd Bergmann
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of incorrect code that results from 'char' being unsigned here, e.g. realtek/rtlwifi/rc.c:113:18: error: comparison is always true due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8188ee/dm.c:1070:22: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192ce/trx.c:54:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192cu/mac.c:601:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192de/trx.c:53:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192ee/phy.c:1268:12: error: comparison is always true due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8192se/rf.c:150:20: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8723be/dm.c:877:29: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8723be/phy.c:386:16: error: comparison is always true due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/dm.c:1514:38: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/phy.c:1558:11: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/phy.c:386:24: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/rtl8821ae/trx.c:55:12: error: comparison is always false due to limited range of data type [-Werror=type-limits] realtek/rtlwifi/stats.c:31:16: error: comparison is always false due to limited range of data type [-Werror=type-limits] This patch changes all uses of 'char' in this driver that refer to 8-bit integers to use 's8' instead, which is signed on all architectures. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: btcoexist: Convert BTC_PRINTK to btc_<foo>_dbgJoe Perches
Use a more common logging style. Miscellanea: o Add specific logging macros for ALGORITHM and INTERFACE types o Output the messages at KERN_DEBUG o Coalesce formats o Align arguments o Whitespace style adjustments for only these changes Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-04-06rtlwifi: btcoexist: Implement antenna selectionLarry Finger
The previous patch added an option to rtl8723be to manually select the antenna for those cases when only a single antenna is present, and the on-board EEPROM is incorrectly programmed. This patch implements the necessary changes in the Bluetooth coexistence driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> [V4.0+] Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-14rtlwifi: rtl818x: Move drivers into new realtek directoryLarry Finger
Now that a new mac80211-based driver for Realtek devices has been submitted, it is time to reorganize the directories. Rather than having directories rtlwifi and rtl818x be in drivers/net/wireless/, they will now be in drivers/net/wireless/realtek/. This change simplifies the directory structure, but does not result in any configuration changes that are visable to the user. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit (git 2.34.1) at 2024-06-10 13:04:41 +0000