| Age | Commit message (Collapse) | Author |
|---|
|
It is possible to use nl80211 to request to the driver to do allow the
required bus configuration to wake-up the host.
This patch implements the required API for nl80211.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20250304153224.39083-6-jerome.pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
WF200 is able to keep the connection with the AP alive while the host is
asleep. So, let's expose this capability to the user.
For now, we don't provide any way to control the device filtering
features. The user has to allow wake-up on any received packets and on
disconnections.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://patch.msgid.link/20250304153224.39083-3-jerome.pouiller@silabs.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
RSN IE missing in beacon is normal in open networks.
Avoid returning -EINVAL in this case.
Steps to reproduce:
$ cat /etc/wpa_supplicant.conf
network={
ssid="testNet"
mode=2
key_mgmt=NONE
}
$ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf
nl80211: Beacon set failed: -22 (Invalid argument)
Failed to set beacon parameters
Interface initialization failed
wlan0: interface state UNINITIALIZED->DISABLED
wlan0: AP-DISABLED
wlan0: Unable to setup interface.
Failed to initialize AP interface
After the change:
$ wpa_supplicant -iwlan0 -c /etc/wpa_supplicant.conf
Successfully initialized wpa_supplicant
wlan0: interface state UNINITIALIZED->ENABLED
wlan0: AP-ENABLED
Cc: stable@vger.kernel.org
Fixes: fe0a7776d4d1 ("wifi: wfx: fix possible NULL pointer dereference in wfx_set_mfp_ap()")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240823131521.3309073-1-alexander.sverdlin@siemens.com
|
|
This will allow the low level driver to take different actions for
different flows.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240618192529.739036208b6e.Ie18a2fe8e02bf2717549d39420b350cfdaf3d317@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For channel contexts, mac80211 currently uses the cfg80211
chandef struct (control channel, center freq(s), width) to
define towards drivers and internally how these behave. In
fact, there are _two_ such structs used, where the min_def
can reduce bandwidth according to the stations connected.
Unfortunately, with EHT this is longer be sufficient, at
least not for all hardware. EHT requires that non-AP STAs
that are connected to an AP with a lower bandwidth than it
(the AP) advertises (e.g. 160 MHz STA connected to 320 MHz
AP) still be able to receive downlink OFDMA and respond to
trigger frames for uplink OFDMA that specify the position
and bandwidth for the non-AP STA relative to the channel
the AP is using. Therefore, they need to be aware of this,
and at least for some hardware (e.g. Intel) this awareness
is in the hardware. As a result, use of the "same" channel
may need to be split over two channel contexts where they
differ by the AP being used.
As a first step, introduce a concept of a channel request
('chanreq') for each interface, to control the context it
requests. This step does nothing but reorganise the code,
so that later the AP's chandef can be added to the request
in order to handle the EHT case described above.
Link: https://msgid.link/20240129194108.2e88e48bd2e9.I4256183debe975c5ed71621611206fdbb69ba330@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Kmemleak reported this error:
unreferenced object 0xd73d1180 (size 184):
comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.245s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 1e 00 01 00 00 00 00 00 ................
backtrace:
[<5ca11420>] kmem_cache_alloc+0x20c/0x5ac
[<127bdd74>] __alloc_skb+0x144/0x170
[<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
[<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
[<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
[<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
[<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
[<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
[<47bd8b68>] genl_rcv_msg+0x198/0x378
[<453ef796>] netlink_rcv_skb+0xd0/0x130
[<6b7c977a>] genl_rcv+0x34/0x44
[<66b2d04d>] netlink_unicast+0x1b4/0x258
[<f965b9b6>] netlink_sendmsg+0x1e8/0x428
[<aadb8231>] ____sys_sendmsg+0x1e0/0x274
[<d2b5212d>] ___sys_sendmsg+0x80/0xb4
[<69954f45>] __sys_sendmsg+0x64/0xa8
unreferenced object 0xce087000 (size 1024):
comm "wpa_supplicant", pid 1559, jiffies 13006305 (age 964.246s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
10 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<9a993714>] __kmalloc_track_caller+0x230/0x600
[<f83ea192>] kmalloc_reserve.constprop.0+0x30/0x74
[<a2c61343>] __alloc_skb+0xa0/0x170
[<fb8a5e38>] __netdev_alloc_skb+0x50/0x180
[<0f9fa1d5>] __ieee80211_beacon_get+0x290/0x4d4 [mac80211]
[<7accd02d>] ieee80211_beacon_get_tim+0x54/0x18c [mac80211]
[<41e25cc3>] wfx_start_ap+0xc8/0x234 [wfx]
[<93a70356>] ieee80211_start_ap+0x404/0x6b4 [mac80211]
[<a4a661cd>] nl80211_start_ap+0x76c/0x9e0 [cfg80211]
[<47bd8b68>] genl_rcv_msg+0x198/0x378
[<453ef796>] netlink_rcv_skb+0xd0/0x130
[<6b7c977a>] genl_rcv+0x34/0x44
[<66b2d04d>] netlink_unicast+0x1b4/0x258
[<f965b9b6>] netlink_sendmsg+0x1e8/0x428
[<aadb8231>] ____sys_sendmsg+0x1e0/0x274
[<d2b5212d>] ___sys_sendmsg+0x80/0xb4
However, since the kernel is build optimized, it seems the stack is not
accurate. It appears the issue is related to wfx_set_mfp_ap(). The issue
is obvious in this function: memory allocated by ieee80211_beacon_get()
is never released. Fixing this leak makes kmemleak happy.
Reported-by: Ulrich Mohr <u.mohr@semex-engcon.com>
Co-developed-by: Ulrich Mohr <u.mohr@semex-engcon.com>
Signed-off-by: Ulrich Mohr <u.mohr@semex-engcon.com>
Fixes: 268bceec1684 ("staging: wfx: fix BA when device is AP and MFP is enabled")
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240202164213.1606145-1-jerome.pouiller@silabs.com
|
|
Since 'ieee80211_beacon_get()' can return NULL, 'wfx_set_mfp_ap()'
should check the return value before examining skb data. So convert
the latter to return an appropriate error code and propagate it to
return from 'wfx_start_ap()' as well. Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204171130.141394-1-dmantipov@yandex.ru
|
|
With some conditions, the device is able to send/receive frames during
scan operation. So, it is possible to use it implement the "remain on
channel" feature. We just ask for a passive scan (without sending any
probe request) on one channel.
This architecture allows to leverage some interesting features:
- if the device is AP, the device switches channel just after the next
beacon and the beacons are stopped during the off-channel interval.
- if the device is connected, it advertises it is asleep before to
switch channel (so the AP should stop to try to send data)
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004172843.195332-9-jerome.pouiller@silabs.com
|
|
Currently, one scan_lock is associated to each vif. However, concurrent
scan on vifs is explicitly prohibited by the device. Currently,
scan_lock is associated with a vif but it is always locked with
conf_mutex (there is a case where conf_mutex is not associated to
scan_lock but scan_lock is tested on all interfaces). So concurrent scan
on vifs cannot happen.
So, this patch relocate scan_lock to the device and simplify the code.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004172843.195332-7-jerome.pouiller@silabs.com
|
|
The device ignore the rx filters during the scan operation.
wfx_configure_filter() acquires scan_lock to reflect this restriction.
However, it is not really necessary since mac80211 don't try to
configure Rx filters during scan.
However, the things are changing. The scan operation is going to be used
to implement remain-on-channel. In this case, wfx_configure_filter() can
be called during the scan. Currently, this scenario generate a delay
that end with a timeout in the upper layers. For the final user, some
scenario of the EasyConnect specification end with a failure.
So, avoid acquiring the scan_lock and just return.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004172843.195332-6-jerome.pouiller@silabs.com
|
|
wfx_rate_mask_to_hw() is only used in hif_tx.c. So relocate it into
hif_tx.c and mark it static.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004172843.195332-3-jerome.pouiller@silabs.com
|
|
The WF200 allow to start two network interfaces (one AP, one station) on
two different channels. Since magic does not exist, it only works if the
station interface enables power save.
Thus, the driver detects this case and enforce power save as necessary.
This patch fixes the case where the AP interface is stopped and it is no
more necessary to enforce power saving on the station interface.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231004172843.195332-2-jerome.pouiller@silabs.com
|
|
switch/(un)assign_vif_chanctx()
Since mac80211 already has a protected pointer to link_conf,
pass it to the driver to avoid additional RCU locking.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When calling start/stop_ap(), mac80211 already has a protected
link_conf pointer. Pass it to the driver, so it shouldn't
handle RCU protection.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Take the link into account in the QoS settings (EDCA parameters)
APIs.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This really shouldn't be in a per-link config, we don't want
to let anyone control it that way (if anything, link powersave
could be forced through APIs to activate/deactivate a link),
and we don't support powersave in software with devices that
can do MLO.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Pass the link id through to the get_beacon and return
the beacon for a specific link id.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In start_ap and stop_ap mac80211 callbacks pass the link_id
to the drivers.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Make the channel context code MLO aware, along with some
functions that it uses, so that the chan.c file is now
MLD-clean and no longer uses deflink/bss_conf/etc.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Split the bss_info_changed method to vif_cfg_changed and
link_info_changed, with the latter getting a link ID.
Also change the 'changed' parameter to u64 already, we
know we need that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We'll use bss_conf for per-link configuration later, so
move out all the non-link-specific data out into a new
struct ieee80211_vif_cfg used in the vif.
Some adjustments were done with the following spatch:
@@
expression sdata;
struct ieee80211_vif *vifp;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
(
-sdata->vif.bss_conf.var
+sdata->vif.cfg.var
|
-vifp->bss_conf.var
+vifp->cfg.var
)
@bss_conf@
struct ieee80211_bss_conf *bss_conf;
identifier var = { assoc, ibss_joined, aid, arp_addr_list, arp_addr_cnt, ssid, ssid_len, s1g, ibss_creator };
@@
-bss_conf->var
+vif_cfg->var
(though more manual fixups were needed, e.g. replacing
"vif_cfg->" by "vif->cfg." in many files.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 5.19-rc1.
Lots of forward progress happened this development cycle, one driver
(wfx wireless driver) got merged into the real portion of the kernel,
and another one (unisys) was removed as no one is around anymore to
take care of it and no one has the hardware. Combined with loads of
tiny driver cleanups overall we removed 13k lines of code from the
tree, a nice improvement.
Other than the wfx and unisys driver changes the major points of this
merge is:
- r8188eu driver cleanups. So many cleanups. It's amazing just how
many things have been cleaned up here, and yet, how many remain to
go. Lots of work happened here, and it doesn't look to slow down
any time soon.
- other wifi driver cleanups. Not as many as the r8188eu driver, but
still pretty impressive from a janitorial point of view.
- bcm2853 driver cleanups
- other very minor driver cleanups
All of these have been in the linux-next tree for weeks with no
reported issues"
* tag 'staging-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (363 commits)
staging: r8188eu: remove include/rtw_debug.h
staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan()
staging: r8188eu: delete rtw_wx_read/write32()
staging: r8188eu: Remove multiple assignments
staging: r8188eu: add check for kzalloc
staging: r8188eu: fix warnings in rtw_wlan_util
staging: r8188eu: fix warnings in rtw_pwrctrl
staging: r8188eu: fix warnings in rtw_p2p
staging: rtl8712: fix uninit-value in r871xu_drv_init()
staging: rtl8712: fix uninit-value in usb_read8() and friends
staging: rtl8712: add error handler in r8712_usbctrl_vendorreq()
staging: r8188eu: remove _drv_ defines from include/rtw_debug.h
staging: vc04_services: remove unused macro
staging: rtl8192u: remove null check after call container_of()
staging: rtl8192e: remove null check after call container_of()
staging: ks7010: remove null check after call container_of()
staging: r8188eu: remove HW_VAR_AC_PARAM_BE from SetHwReg8188EU()
staging: r8188eu: assoc_rsp and assoc_rsp_len are not used
staging: r8188eu: last_rx_mgnt_pkts is set but not used
staging: r8188eu: simplify error handling in recv_func_prehandle
...
|
|
Currently, upon virtual interface creation, wfx_add_interface() stores
a reference to the corresponding struct ieee80211_vif in private data,
for later usage. This is not needed when using the container_of
construct. This construct already has all the info it needs to retrieve
the reference to the corresponding struct from the offset that is
already available, inherent in container_of(), between its type and
member inputs (struct ieee80211_vif and drv_priv, respectively).
Remove vif (which was previously storing the reference to the struct
ieee80211_vif) from the struct wfx_vif, define a function
wvif_to_vif(wvif) for container_of(), and replace all wvif->vif with
the newly defined container_of construct.
Signed-off-by: Jaehee Park <jhpark1013@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220506170046.GA1297231@jaehee-ThinkPad-X1-Extreme
|
|
This is an immutable branch shared between wireless-next and
staging-next for moving wfx driver out of staging to
drivers/net/wireless directory.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next into staging-next
This moves the wfx driver out of staging.
* 'wfx-move-out-of-staging' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next:
wfx: get out from the staging area
|
|
The wfx driver is now mature enough to leave the staging area.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
|
