summaryrefslogtreecommitdiff
path: root/drivers/pci/host/Kconfig
AgeCommit message (Collapse)Author
2018-06-08PCI: Collect all native drivers under drivers/pci/controller/Shawn Lin
Native PCI drivers for root complex devices were originally all in drivers/pci/host/. Some of these devices can also be operated in endpoint mode. Drivers for endpoint mode didn't seem to fit in the "host" directory, so we put both the root complex and endpoint drivers in per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc. These per-device directories contain trivial Kconfig and Makefiles and clutter drivers/pci/. Make a new drivers/pci/controllers/ directory and collect all the device-specific drivers there. No functional change intended. Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-06-06Merge branch 'pci/kconfig'Bjorn Helgaas
- remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) * pci/kconfig: PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS # Conflicts: # drivers/pci/dwc/Kconfig # drivers/pci/host/Kconfig
2018-06-06Merge branch 'lorenzo/pci/rockchip'Bjorn Helgaas
- update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) * lorenzo/pci/rockchip: arm64: defconfig: update config for Rockchip PCIe dt-bindings: PCI: rockchip: Add DT bindings for Rockchip PCIe EP driver PCI: rockchip: Add EP driver for Rockchip PCIe controller dt-bindings: PCI: rockchip: Rename rockchip-pcie.txt to rockchip-pcie-host.txt PCI: rockchip: Split out common function to init controller PCI: rockchip: Split out rockchip_pcie_parse_dt() to parse DT PCI: rockchip: Separate common code from RC driver # Conflicts: # drivers/pci/host/pcie-rockchip.c
2018-06-06Merge branch 'lorenzo/pci/mediatek'Bjorn Helgaas
- implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) * lorenzo/pci/mediatek: PCI: mediatek: Implement chained IRQ handling setup PCI: mediatek: Set up vendor ID and class type for MT7622 # Conflicts: # drivers/pci/host/Kconfig
2018-06-06Merge branch 'lorenzo/pci/host/misc'Bjorn Helgaas
- update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) * lorenzo/pci/host/misc: MAINTAINERS: Update Layerscape PCIe driver maintainers list PCI: Improve host drivers compile test coverage # Conflicts: # drivers/pci/dwc/Kconfig
2018-05-30PCI: Enable PCI_DOMAINS along with generic PCI host controllerJan Kiszka
The generic PCI host controller is often instantiated by hypervisors, and they may add several of them or add them in addition to a physical host controller like the Jailhouse hypervisor is doing. Therefore, allow for multiple domains so that we can handle them all. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-21PCI: mediatek: Implement chained IRQ handling setupHonghui Zhang
Implement irq_chip based solution for IRQs management in order to comply with IRQ framework. Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-18PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUSBjorn Helgaas
Host bridge drivers do not use the portdrv interfaces (struct pcie_device, struct pcie_port_service_driver, pcie_port_service_register(), etc), and they should not select CONFIG_PCIEPORTBUS. If users need the portdrv services, they can select CONFIG_PCIEPORTBUS just like all other PCI users. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-05-11PCI: rockchip: Add EP driver for Rockchip PCIe controllerShawn Lin
Add support for the Rockchip PCIe controller in endpoint mode; it currently supports up to 32 regions with each region spanning at least 1MB as per TRM. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-05-10PCI: rockchip: Separate common code from RC driverShawn Lin
In preparation for introducing EP driver for Rockchip PCIe controller, rename the RC driver from pcie-rockchip.c to pcie-rockchip-host.c, and only leave some common functions in pcie-rockchip.c in order to be reused for both of RC driver and EP driver. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Jeffy Chen <jeffy.chen@rock-chips.com>
2018-05-01PCI: Improve host drivers compile test coverageRob Herring
Add COMPILE_TEST on driver config options with it. Some ARM drivers still have arch dependencies, so we have to keep those dependent on ARM. Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> [lorenzo.pieralisi@arm.com: rebased, updated log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-03-14PCI: tegra: Add PCI_MSI_IRQ_DOMAIN kconfig dependencyArnd Bergmann
Building the tegra PCIe host driver without MSI results in a link failure: drivers/pci/host/pci-tegra.o:(.data+0x70): undefined reference to `pci_msi_unmask_irq' drivers/pci/host/pci-tegra.o:(.data+0x74): undefined reference to `pci_msi_mask_irq' This adds the same dependency that everyone else uses. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [lorenzo.pieralisi@arm.com: rewrote commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Thierry Reding <treding@nvidia.com>
2018-02-23PCI: vmd: Fix malformed Kconfig defaultUlf Magnusson
'default N' should be 'default n', though they happen to have the same effect here, due to undefined symbols (N in this case) evaluating to n in a tristate sense. Remove the default instead of changing it. bool and tristate symbols implicitly default to n. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
2018-01-26PCI: Add SPDX GPL-2.0 when no license was specifiedBjorn Helgaas
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license") added SPDX GPL-2.0 to several PCI files that previously contained no license information. Add SPDX GPL-2.0 to all other PCI files that did not contain any license information and hence were under the default GPL version 2 license of the kernel. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-05PCI: v3-semi: Add V3 Semiconductor PCI host driverLinus Walleij
This PCI host bridge from V3 Semiconductor needs no further introduction. An ancient driver for it has been sitting in arch/arm/mach-integrator/pci_v3.* since before v2.6.12 and the initial migration to git. But we need to get the drivers out of arch/arm/* and get proper handling of the old drivers, rewrite and clean up so the PCI maintainer can control the mass of drivers without having to run all over the kernel. We also switch swiftly to all the new infrastructure found in the PCI hosts as of late. Some code is preserved so I have added an extensive list of authors in the top comment section. This driver probes with the following result: OF: PCI: host bridge /pciv3@62000000 ranges: OF: PCI: No bus range found for /pciv3@62000000, using [bus 00-ff] OF: PCI: IO 0x60000000..0x6000ffff -> 0x00000000 OF: PCI: MEM 0x40000000..0x4fffffff -> 0x40000000 OF: PCI: MEM 0x50000000..0x5fffffff -> 0x50000000 pci-v3-semi 62000000.pciv3: initialized PCI V3 Integrator/AP integration pci-v3-semi 62000000.pciv3: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x40000000-0x4fffffff] pci_bus 0000:00: root bus resource [mem 0x50000000-0x5fffffff pref] pci-v3-semi 62000000.pciv3: parity error interrupt pci-v3-semi 62000000.pciv3: master abort error interrupt pci-v3-semi 62000000.pciv3: PCI target LB->PCI READ abort interrupt pci-v3-semi 62000000.pciv3: master abort error interrupt (repeats a few times) pci 0000:00:09.0: [1011:0024] type 01 class 0x060400 pci-v3-semi 62000000.pciv3: master abort error interrupt pci-v3-semi 62000000.pciv3: PCI target LB->PCI READ abort interrupt pci 0000:00:0b.0: [8086:1229] type 00 class 0x020000 pci 0000:00:0b.0: reg 0x10: [mem 0x00000000-0x00000fff pref] pci 0000:00:0b.0: reg 0x14: [io 0x0000-0x001f] pci 0000:00:0b.0: reg 0x18: [mem 0x00000000-0x000fffff] pci 0000:00:0b.0: reg 0x30: [mem 0x00000000-0x000fffff pref] pci 0000:00:0b.0: supports D1 D2 pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot pci 0000:00:0c.0: [5333:8811] type 00 class 0x030000 pci 0000:00:0c.0: reg 0x10: [mem 0x00000000-0x03ffffff] pci 0000:00:0c.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] pci 0000:00:0c.0: vgaarb: VGA device added: decodes=io+mem,owns=io,locks=none PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers enabled pci 0000:00:0c.0: BAR 0: assigned [mem 0x40000000-0x43ffffff] pci 0000:00:0b.0: BAR 2: assigned [mem 0x44000000-0x440fffff] pci 0000:00:0b.0: BAR 6: assigned [mem 0x50000000-0x500fffff pref] pci 0000:00:0c.0: BAR 6: assigned [mem 0x50100000-0x5010ffff pref] pci 0000:00:0b.0: BAR 0: assigned [mem 0x50110000-0x50110fff pref] pci 0000:00:0b.0: BAR 1: assigned [io 0x1000-0x101f] pci 0000:00:09.0: PCI bridge to [bus 01] pci 0000:00:0b.0: Firmware left e100 interrupts enabled; disabling (...) e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:00:0b.0: enabling device (0146 -> 0147) e100 0000:00:0b.0 eth0: addr 0x50110000, irq 31, MAC addr 00:08:c7:99:d2:57 > lspci 00:0b.0 Class 0200: 8086:1229 00:09.0 Class 0604: 1011:0024 00:0c.0 Class 0300: 5333:8811 > cat /proc/iomem 40000000-4fffffff : V3 PCI NON-PRE-MEM 40000000-43ffffff : 0000:00:0c.0 44000000-440fffff : 0000:00:0b.0 44000000-440fffff : e100 50000000-5fffffff : V3 PCI PRE-MEM 50000000-500fffff : 0000:00:0b.0 50100000-5010ffff : 0000:00:0c.0 50110000-50110fff : 0000:00:0b.0 50110000-50110fff : e100 61000000-61ffffff : /pciv3@62000000 62000000-6200ffff : /pciv3@62000000 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [bhelgaas: fold in %pR fixes from Arnd Bergmann <arnd@arndb.de>: http://lkml.kernel.org/r/20171011140224.3770968-1-arnd@arndb.de] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
2017-09-07Merge branch 'pci/host-xilinx' into nextBjorn Helgaas
* pci/host-xilinx: PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: xilinx: Allow build on MIPS platforms PCI: xilinx: Don't enable config completion interrupts PCI: xilinx: Unify INTx & MSI interrupt decode PCI: xilinx-nwl: Translate INTx range to hwirqs 0-3 PCI: xilinx: Translate INTx range to hwirqs 0-3
2017-08-30PCI: mediatek: Add controller support for MT2712 and MT7622Ryder Lee
MT2712 and MT7622 using a new IP block of Gen2 controller which has two root ports and shares the same probing flow with MT2701/MT7623. Both MT2712 and MT7622 have the same per-port control registers, but there are slight differences between them: - MT7622 has more clocks than MT2712. - MT7622 has shared control registers which are used to enable LTSSM and ASPM while MT2712 does not. Add host controller support for MT2712/MT7622. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com> [bhelgaas: folded in fix from http://lkml.kernel.org/r/1502715868-17651-2-git-send-email-honghui.zhang@mediatek.com] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-16PCI: xilinx: Allow build on MIPS platformsPaul Burton
Allow the xilinx-pcie driver to be built on MIPS platforms which make use of generic PCI drivers rather than legacy MIPS-specific interfaces. This is used on the MIPS Boston development board. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Bharat Kumar Gogada <bharatku@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Ravikiran Gummaluri <rgummal@xilinx.com>
2017-07-07Merge branch 'pci/host-tango' into nextBjorn Helgaas
* pci/host-tango: PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge support PCI: Add DT binding for Sigma Designs Tango PCIe controller Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2017-07-07PCI: tango: Add Sigma Designs Tango SMP8759 PCIe host bridge supportMarc Gonzalez
This driver is required to work around several hardware bugs in the PCIe controller. The SMP8759 does not support legacy interrupts or IO space. Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com> [bhelgaas: add CONFIG_BROKEN dependency, various cleanups] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-07-02PCI: mediatek: Add MediaTek PCIe host controller supportRyder Lee
Add support for the MediaTek PCIe Gen2 controller which can be found on MT7623 series SoCs. [bhelgaas: fold in mtk_pcie_parse_and_add_res() bugfix from http://lkml.kernel.org/r/1496644078-27122-1-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in MAINTAINERS update from http://lkml.kernel.org/r/1497588789-28607-1-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in pci_scan_root_bus_bridge() update and leak fix from http://lkml.kernel.org/r/1498555451-55073-2-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in powerup fixes from http://lkml.kernel.org/r/1497866400-41844-2-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in poweroff when link down fixes from http://lkml.kernel.org/r/1497866400-41844-3-git-send-email-ryder.lee@mediatek.com] [bhelgaas: fold in optional property fixes from http://lkml.kernel.org/r/1497866400-41844-4-git-send-email-ryder.lee@mediatek.com] [bhelgaas: set host->map_irq and host->swizzle_irq and drop pci_fixup_irqs(), remove unnecessary "return", rename mtk_pcie_link_is_up() to mtk_pcie_link_up() for consistency, add local struct device pointer] [bhelgaas: fold in pci_add_flags() removal from http://lkml.kernel.org/r/1499061300-55951-1-git-send-email-ryder.lee@mediatek.com] Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-28Merge branch 'pci/host-rockchip' into nextBjorn Helgaas
* pci/host-rockchip: PCI: rockchip: Modularize PCI: Export pci_remap_iospace() and pci_unmap_iospace() PCI: rockchip: Add remove() support PCI: rockchip: Set PCI_EXP_LNKSTA_SLC in the Root Port PCI: rockchip: Advertise 128-byte Read Completion Boundary support PCI: rockchip: Make 'return 0' more obvious in probe() PCI: rockchip: Unindent rockchip_pcie_set_power_limit() PCI: rockchip: Handle regulator_get_current_limit() failure correctly
2017-04-28Merge branch 'pci/host-iproc' into nextBjorn Helgaas
* pci/host-iproc: PCI: iproc: Add PCI_DOMAIN dependency to PCI Kconfig
2017-04-21PCI: rockchip: ModularizeBrian Norris
Now that we've exported pci_remap_iospace() and added proper remove() support, there's no reason this can't be a loadable module. Signed-off-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
2017-03-24PCI: faraday: Add Faraday Technology FTPCI100 PCI Host Bridge driverLinus Walleij
Add a host bridge driver for the Faraday Technology FPPCI100 host bridge, used for Cortina Systems Gemini SoC (SL3516) PCI Host Bridge. This code is inspired by the out-of-tree OpenWRT patch and then extensively rewritten for device tree and using the modern helpers to cut down and modernize the code to all new PCI frameworks. A driver exists in U-Boot as well. Tested on the ITian Square One SQ201 NAS with the following result in the boot log (trimmed to relevant parts): OF: PCI: host bridge /soc/pci@50000000 ranges: OF: PCI: IO 0x50000000..0x500fffff -> 0x00000000 OF: PCI: MEM 0x58000000..0x5fffffff -> 0x58000000 ftpci100 50000000.pci: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [bus 00-ff] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] pci_bus 0000:00: root bus resource [mem 0x58000000-0x5fffffff] ftpci100 50000000.pci: DMA MEM1 BASE: 0x0000000000000000 -> 0x0000000007ffffff config 00070000 ftpci100 50000000.pci: DMA MEM2 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000 ftpci100 50000000.pci: DMA MEM3 BASE: 0x0000000000000000 -> 0x0000000003ffffff config 00060000 PCI: bus0: Fast back to back transfers disabled pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-22 pci 0000:00:0c.0: BAR 0: assigned [mem 0x58000000-0x58007fff] pci 0000:00:09.2: BAR 0: assigned [mem 0x58008000-0x580080ff] pci 0000:00:09.0: BAR 4: assigned [io 0x1000-0x101f] pci 0000:00:09.1: BAR 4: assigned [io 0x1020-0x103f] pci 0000:00:09.0: enabling device (0140 -> 0141) pci 0000:00:09.0: HCRESET not completed yet! pci 0000:00:09.1: enabling device (0140 -> 0141) pci 0000:00:09.1: HCRESET not completed yet! pci 0000:00:09.2: enabling device (0140 -> 0142) rt61pci 0000:00:0c.0: enabling device (0140 -> 0142) ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2561, rf: 0003, rev: 000c ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver ehci-pci 0000:00:09.2: EHCI Host Controller ehci-pci 0000:00:09.2: new USB bus registered, assigned bus number 1 ehci-pci 0000:00:09.2: irq 125, io mem 0x58008000 ehci-pci 0000:00:09.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:09.0: UHCI Host Controller uhci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:09.0: HCRESET not completed yet! uhci_hcd 0000:00:09.0: irq 123, io base 0x00001000 hub 2-0:1.0: USB hub found hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19) uhci_hcd 0000:00:09.1: UHCI Host Controller uhci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:09.1: HCRESET not completed yet! uhci_hcd 0000:00:09.1: irq 124, io base 0x00001020 hub 3-0:1.0: USB hub found hub 3-0:1.0: config failed, hub doesn't have any ports! (err -19) scsi 0:0:0:0: Direct-Access USB Flash Disk 1.00 PQ: 0 ANSI: 2 sd 0:0:0:0: [sda] 7900336 512-byte logical blocks: (4.04 GB/3.77 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] No Caching mode page found sd 0:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI removable disk ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin' ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8 IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready $ lspci 00:00.0 Class 0600: 159b:4321 00:09.2 Class 0c03: 1106:3104 00:09.0 Class 0c03: 1106:3038 00:09.1 Class 0c03: 1106:3038 00:0c.0 Class 0280: 1814:0301 $ cat /proc/interrupts CPU0 123: 0 PCI 0 Edge uhci_hcd:usb2 124: 0 PCI 1 Edge uhci_hcd:usb3 125: 159 PCI 2 Edge ehci_hcd:usb1 126: 1082 PCI 3 Edge rt61pci $ cat /proc/iomem 50000000-500000ff : /soc/pci@50000000 58000000-5fffffff : Gemini PCI MEM 58000000-58007fff : 0000:00:0c.0 58000000-58007fff : 0000:00:0c.0 58008000-580080ff : 0000:00:09.2 58008000-580080ff : ehci_hcd The EHCI USB hub works fine; I can mount and manage files and the IRQs just keep ticking up. I can issue iwlist wlan0 scanning and see all the WLANs here. I don't have wpa_supplicant so have not tried connecting to them. [bhelgaas: fold in %pap change from Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Janos Laube <janos.dev@gmail.com> CC: Paulius Zaleckas <paulius.zaleckas@gmail.com> CC: Hans Ulli Kroll <ulli.kroll@googlemail.com> CC: Florian Fainelli <f.fainelli@gmail.com> CC: Feng-Hsin Chiang <john453@faraday-tech.com> CC: Greentime Hu <green.hu@gmail.com>
2017-03-16PCI: iproc: Add PCI_DOMAIN dependency to PCI KconfigJon Mason
2+ PCI devices fail to be discovered due to each bus having the same PCI domain. This is because the domain defined in the device tree file is not being added due to PCI_DOMAIN not being enabled. So, every PCI bus has a domain of zero. When PCI_DOMAIN is selected by the Kconfig, it picks up the domain defined in the device tree file and everything works as expected. Since both PCIE_IPROC_PLATFORM and PCIE_IPROC_BCMA need PCI_DOMAIN, move it to PCIE_IPROC so it will be automatically selected for both. Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-02-21PCI: Move DesignWare IP support to new drivers/pci/dwc/ directoryKishon Vijay Abraham I
Group all the PCI drivers that use DesignWare core in dwc directory. dwc IP is capable of operating in both host mode and device mode and keeping it inside the *host* directory is misleading. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-By: Joao Pinto <jpinto@synopsys.com> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Minghuan Lian <minghuan.Lian@freescale.com> Cc: Mingkai Hu <mingkai.hu@freescale.com> Cc: Roy Zang <tie-fei.zang@freescale.com> Cc: Richard Zhu <hongxing.zhu@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Niklas Cassel <niklas.cassel@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Zhou Wang <wangzhou1@hisilicon.com> Cc: Gabriele Paoloni <gabriele.paoloni@huawei.com> Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
2016-12-12Merge branch 'pci/host-vmd' into nextBjorn Helgaas
* pci/host-vmd: PCI: vmd: Fix suspend handlers defined-but-not-used warning PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCU PCI: vmd: Remove unnecessary pci_set_drvdata()
2016-12-12Merge branch 'pci/host-tegra' into nextBjorn Helgaas
* pci/host-tegra: arm64: tegra: Enable PCIe on Jetson TX1 arm64: tegra: Add PCIe host bridge on Tegra210 PCI: tegra: Enable the driver on 64-bit ARM PCI: tegra: Add Tegra210 support PCI: tegra: Implement PCA enable workaround dt-bindings: pci: tegra: Add Tegra210 support PCI: tegra: Use new pci_register_host_bridge() interface PCI: Export host bridge registration interface PCI: Allow driver-specific data in host bridge PCI: Add pci_register_host_bridge() interface
2016-12-12Merge branch 'pci/host-rockchip' into nextBjorn Helgaas
* pci/host-rockchip: PCI: rockchip: Move the deassert of pm/aclk/pclk after phy_init() PCI: rockchip: Split out rockchip_cfg_atu() PCI: rockchip: Clean up bit definitions for PCIE_RC_CONFIG_LCS PCI: rockchip: Correct the use of FTS mask PCI: rockchip: Remove the pointer to L1 substate cap PCI: rockchip: Specify the link capability PCI: rockchip: Fix negotiated lanes calculation PCI: rockchip: Add Kconfig COMPILE_TEST PCI: rockchip: Mark RC as common clock architecture PCI: rockchip: Provide captured slot power limit and scale PCI: rockchip: Add three new resets as required properties PCI: Don't attempt to claim shadow copies of ROM PCI: designware: Check for iATU unroll support after initializing host PCI: qcom: Fix pp->dev usage before assignment PCI: designware-plat: Update author email address PCI: layerscape: Fix drvdata usage before assignment PCI: designware-plat: Change maintainer to Jose Abreu
2016-12-07PCI: rockchip: Add Kconfig COMPILE_TESTShawn Lin
Allow selection of the Rockchip driver for compile testing, even if we aren't building for ARCH_ROCKCHIP. [bhelgaas: changelog] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-07PCI: vmd: Use SRCU as a local RCU to prevent delaying global RCUJon Derrick
SRCU lets synchronize_srcu() depend on VMD-local RCU primitives, preventing long delays from locking up RCU in other systems. VMD performs a synchronize when removing a device, but will hit all IRQ lists if the device uses all VMD vectors. This patch will not help VMD's RCU synchronization, but will isolate the read side delays to the VMD subsystem. Additionally, the use of SRCU in VMD's ISR will keep it isolated from any other RCU waiters in the rest of the system. Tested using concurrent FIO and NVMe resets: [global] rw=read bs=4k direct=1 ioengine=libaio iodepth=32 norandommap timeout=300 runtime=1000000000 [nvme0] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme0n1 [nvme1] cpus_allowed=0-63 numjobs=8 filename=/dev/nvme1n1 while (true) do for i in /sys/class/nvme/nvme*; do echo "Resetting ${i##*/}" echo 1 > $i/reset_controller; sleep 5 done; done Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07PCI: tegra: Enable the driver on 64-bit ARMThierry Reding
The Tegra PCI host controller driver no longer relies on any of the 32-bit ARM glue for PCI, so it can be enabled on 64-bit configurations. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2016-12-06PCI: Add MCFG quirks for X-Gene host controllerDuc Dang
PCIe controllers in X-Gene SoCs are not ECAM compliant: software needs to configure additional controller's register to address device at bus:dev:function. Add a quirk to discover controller MMIO register space and configure controller registers to select and address the target secondary device. The quirk will only be applied for X-Gene PCIe MCFG table with OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs). Tested-by: Jon Masters <jcm@redhat.com> Signed-off-by: Duc Dang <dhdang@apm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controllerTomasz Nowicki
ThunderX pass1.x requires to emulate the EA headers for on-chip devices hence it has to use custom pci_thunder_ecam_ops for accessing PCI config space (pci-thunder-ecam.c). Add new entries to MCFG quirk array where it can be applied while probing ACPI based PCI host controller. ThunderX pass1.x is using the same way for accessing off-chip devices (so-called PEM) as silicon pass-2.x so we need to add PEM quirk entries too. Quirk is considered for ThunderX silicon pass1.x only which is identified via MCFG revision 2. ThunderX pass 1.x requires the following accessors: NUMA node 0 PCI segments 0- 3: pci_thunder_ecam_ops (MCFG quirk) NUMA node 0 PCI segments 4- 9: thunder_pem_ecam_ops (MCFG quirk) NUMA node 1 PCI segments 10-13: pci_thunder_ecam_ops (MCFG quirk) NUMA node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk) [bhelgaas: change Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_ECAM] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controllerTomasz Nowicki
ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully compliant with ECAM standard. It uses non-standard configuration space accessors (see thunder_pem_ecam_ops) and custom configuration space granulation (see bus_shift = 24). In order to access configuration space and probe PEM as ACPI-based PCI host controller we need to add MCFG quirk infrastructure. This involves: 1. A new thunder_pem_acpi_init() init function to locate PEM-specific register ranges using ACPI. 2. Export PEM thunder_pem_ecam_ops structure so it is visible to MCFG quirk code. 3. New quirk entries for each PEM segment. Each contains platform IDs, mentioned thunder_pem_ecam_ops and CFG resources. Quirk is considered for ThunderX silicon pass2.x only which is identified via MCFG revision 1. ThunderX pass 2.x requires the following accessors: NUMA Node 0 PCI segments 0- 3: pci_generic_ecam_ops (ECAM-compliant) NUMA Node 0 PCI segments 4- 9: thunder_pem_ecam_ops (MCFG quirk) NUMA Node 1 PCI segments 10-13: pci_generic_ecam_ops (ECAM-compliant) NUMA Node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk) [bhelgaas: adapt to use acpi_get_rc_resources(), update Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_PEM] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-05Merge branch 'pci/host-vmd' into nextBjorn Helgaas
* pci/host-vmd: x86/PCI: VMD: Move VMD driver to drivers/pci/host x86/PCI: VMD: Synchronize with RCU freeing MSI IRQ descs x86/PCI: VMD: Eliminate index member from IRQ list x86/PCI: VMD: Eliminate vmd_vector member from list type x86/PCI: VMD: Convert to use pci_alloc_irq_vectors() API x86/PCI: VMD: Allocate IRQ lists with correct MSI-X count PCI: Use positive flags in pci_alloc_irq_vectors() PCI: Update "pci=resource_alignment" documentation Conflicts: drivers/pci/host/Kconfig drivers/pci/host/Makefile
2016-10-04x86/PCI: VMD: Move VMD driver to drivers/pci/hostKeith Busch
Move the driver source and Kconfig to the PCI host bridge drivers directory and move the config option to a more appropriate sub-menu instead of occupying the top-level location. Update the Kconfig option with the X86_64 dependency that was implicitly included from the previous location, and add information about the module name when built as a loadable module. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Jon Derrick <jonathan.derrick@intel.com>
2016-09-03PCI: rockchip: Add Rockchip PCIe controller supportShawn Lin
Add support for the Rockchip PCIe controller found on RK3399 SoC platform. [bhelgaas: fold in Brian's rockchip_pcie_client_irq_handler() OR fix, other fixes and cleanups from Guenter Roeck <linux@roeck-us.net> and me, uninitialized variable fix from Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Brian Norris <briannorris@chromium.org>
2016-08-01Merge branches 'pci/host-aardvark', 'pci/host-altera', 'pci/host-dra7xx', ↵Bjorn Helgaas
'pci/host-hv', 'pci/host-vmd' and 'pci/host-xilinx' into next * pci/host-aardvark: arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700 PCI: aardvark: Add Aardvark PCI host controller driver dt-bindings: add DT binding for the Aardvark PCIe controller * pci/host-altera: PCI: altera: Poll for link up status after retraining the link PCI: altera: Check link status before retrain link PCI: altera: Reorder read/write functions * pci/host-dra7xx: PCI: dra7xx: Fix return value in case of error * pci/host-hv: PCI: hv: Fix interrupt cleanup path PCI: hv: Handle all pending messages in hv_pci_onchannelcallback() PCI: hv: Don't leak buffer in hv_pci_onchannelcallback() * pci/host-vmd: x86/PCI: VMD: Separate MSI and MSI-X vector sharing x86/PCI: VMD: Use x86_vector_domain as parent domain x86/PCI: VMD: Use lock save/restore in interrupt enable path x86/PCI: VMD: Initialize list item in IRQ disable x86/PCI: VMD: Select device dma ops to override * pci/host-xilinx: PCI: xilinx: Fix return value in case of error Manually apply changes from pci/demodularize-hosts and pci/host-request-windows to drivers/pci/host/pci-aardvark.c
2016-08-01Merge branches 'pci/demodularize-hosts' and 'pci/host-request-windows' into nextBjorn Helgaas
* pci/demodularize-hosts: PCI: xgene: Make explicitly non-modular PCI: thunder-pem: Make explicitly non-modular PCI: thunder-ecam: Make explicitly non-modular PCI: tegra: Make explicitly non-modular PCI: rcar-gen2: Make explicitly non-modular PCI: rcar: Make explicitly non-modular PCI: mvebu: Make explicitly non-modular PCI: layerscape: Make explicitly non-modular PCI: keystone: Make explicitly non-modular PCI: hisi: Make explicitly non-modular PCI: generic: Make explicitly non-modular PCI: designware-plat: Make it explicitly non-modular PCI: artpec6: Make explicitly non-modular PCI: armada8k: Make explicitly non-modular PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver PCI: Add DT binding for Axis ARTPEC-6 PCIe controller PCI: generic: Select IRQ_DOMAIN * pci/host-request-windows: PCI: versatile: Simplify host bridge window iteration PCI: versatile: Request host bridge window resources with core function PCI: tegra: Request host bridge window resources with core function PCI: tegra: Remove top-level resource from hierarchy PCI: rcar: Simplify host bridge window iteration PCI: rcar: Request host bridge window resources with core function PCI: rcar Gen2: Request host bridge window resources PCI: rcar: Drop gen2 dummy I/O port region ARM: Make PCI I/O space optional PCI: mvebu: Request host bridge window resources with core function PCI: generic: Simplify host bridge window iteration PCI: generic: Request host bridge window resources with core function PCI: altera: Simplify host bridge window iteration PCI: altera: Request host bridge window resources with core function PCI: xilinx-nwl: Use dev_printk() when possible PCI: xilinx-nwl: Request host bridge window resources PCI: xilinx-nwl: Free bridge resource list on failure PCI: xilinx: Request host bridge window resources PCI: xilinx: Free bridge resource list on failure PCI: xgene: Request host bridge window resources PCI: xgene: Free bridge resource list on failure PCI: iproc: Request host bridge window resources PCI: designware: Simplify host bridge window iteration PCI: designware: Request host bridge window resources PCI: designware: Free bridge resource list on failure PCI: Add devm_request_pci_bus_resources()
2016-08-01Merge branches 'pci/host-artpec' and 'pci/host-generic' into ↵Bjorn Helgaas
pci/demodularize-hosts * pci/host-artpec: PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependency PCI: artpec: Add Axis ARTPEC-6 PCIe controller driver PCI: Add DT binding for Axis ARTPEC-6 PCIe controller * pci/host-generic: PCI: generic: Select IRQ_DOMAIN
2016-07-29PCI: artpec: Add PCI_MSI_IRQ_DOMAIN dependencyArnd Bergmann
The DesignWare PCIe driver requires MSI support, so we get a warning for the artpec6 glue driver if that is not enabled: warning: (PCIE_ARTPEC6) selects PCIE_DW which has unmet direct dependencies (PCI && PCI_MSI_IRQ_DOMAIN) Add the same dependency that all other such drivers have. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Cassel <niklas.cassel@axis.com>
2016-07-26PCI: aardvark: Add Aardvark PCI host controller driverThomas Petazzoni
Add a driver for the Aardvark PCIe controller used on the Marvell Armada 3700 ARM64 SoC. Based on work done by Hezi Shahmoon <hezi.shahmoon@marvell.com> and Marcin Wojtas <mw@semihalf.com>. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-15PCI/MSI: irqchip: Fix PCI_MSI dependenciesArnd Bergmann
The PCI_MSI symbol is used inconsistently throughout the tree, with some drivers using 'select' and others using 'depends on', or using conditional selects. This keeps causing problems; the latest one is a result of ARCH_ALPINE using a 'select' statement to enable its platform-specific MSI driver without enabling MSI: warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct dependencies (PCI && PCI_MSI) drivers/irqchip/irq-alpine-msi.c:104:15: error: variable 'alpine_msix_domain_info' has initializer but incomplete type static struct msi_domain_info alpine_msix_domain_info = { ^~~~~~~~~~~~~~~ drivers/irqchip/irq-alpine-msi.c:105:2: error: unknown field 'flags' specified in initializer .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^ drivers/irqchip/irq-alpine-msi.c:105:11: error: 'MSI_FLAG_USE_DEF_DOM_OPS' undeclared here (not in a function) .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS | ^~~~~~~~~~~~~~~~~~~~~~~~ There is little reason to enable PCI support for a platform that uses MSI but then leave MSI disabled at compile time. Select PCI_MSI from irqchips that implement MSI, and make PCI host bridges that use MSI on ARM depend on PCI_MSI_IRQ_DOMAIN. For all three architectures that support PCI_MSI_IRQ_DOMAIN (ARM, ARM64, X86), enable it by default whenever MSI is enabled. [bhelgaas: changelog, omit crypto config change] Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-11PCI: artpec: Add Axis ARTPEC-6 PCIe controller driverNiklas Cassel
The Axis ARTPEC-6 SoC integrates a PCIe controller from Synopsys. Add a new driver that provides the small glue needed to use the existing DesignWare driver to make it work on the Axis ARTPEC-6 SoC. [bhelgaas: return errors directly without gotos, fold in section mismatch fix] Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-06-10PCI: generic: Select IRQ_DOMAINArnd Bergmann
The generic PCI host controller calls of_irq_parse_and_map_pci() in its IRQ fixup, but that function is only available when CONFIG_IRQ_DOMAIN is set: drivers/pci/built-in.o: In function `pci_host_common_probe': drivers/pci/host/pci-host-common.c:181: undefined reference to `of_irq_parse_and_map_pci' There is no downside in enabling the domains here, so use a Kconfig select statement to ensure it's always available to this driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-05-19Merge tag 'pci-v4.7-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Refine PCI support check in pcibios_init() (Adrian-Ken Rueegsegger) - Provide common functions for ECAM mapping (Jayachandran C) - Allow all PCIe services on non-ACPI host bridges (Jon Derrick) - Remove return values from pcie_port_platform_notify() and relatives (Jon Derrick) - Widen portdrv service type from 4 bits to 8 bits (Keith Busch) - Add Downstream Port Containment portdrv service type (Keith Busch) - Add Downstream Port Containment driver (Keith Busch) Resource management: - Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs (Alex Williamson) - Supply CPU physical address (not bus address) to iomem_is_exclusive() (Bjorn Helgaas) - alpha: Call iomem_is_exclusive() for IORESOURCE_MEM, but not IORESOURCE_IO (Bjorn Helgaas) - Mark Broadwell-EP Home Agent 1 as having non-compliant BARs (Prarit Bhargava) - Disable all BAR sizing for devices with non-compliant BARs (Prarit Bhargava) - Move PCI I/O space management from OF to PCI core code (Tomasz Nowicki) PCI device hotplug: - acpiphp_ibm: Avoid uninitialized variable reference (Dan Carpenter) - Use cached copy of PCI_EXP_SLTCAP_HPC bit (Lukas Wunner) Virtualization: - Mark Intel i40e NIC INTx masking as broken (Alex Williamson) - Reverse standard ACS vs device-specific ACS enabling (Alex Williamson) - Work around Intel Sunrise Point PCH incorrect ACS capability (Alex Williamson) IOMMU: - Add pci_add_dma_alias() to abstract implementation (Bjorn Helgaas) - Move informational printk to pci_add_dma_alias() (Bjorn Helgaas) - Add support for multiple DMA aliases (Jacek Lawrynowicz) - Add DMA alias quirk for mic_x200_dma (Jacek Lawrynowicz) Thunderbolt: - Fix double free of drom buffer (Andreas Noever) - Add Intel Thunderbolt device IDs (Lukas Wunner) - Fix typos and magic number (Lukas Wunner) - Support 1st gen Light Ridge controller (Lukas Wunner) Generic host bridge driver: - Use generic ECAM API (Jayachandran C) Cavium ThunderX host bridge driver: - Don't clobber read-only bits in bridge config registers (David Daney) - Use generic ECAM API (Jayachandran C) Freescale i.MX6 host bridge driver: - Use enum instead of bool for variant indicator (Andrey Smirnov) - Implement reset sequence for i.MX6+ (Andrey Smirnov) - Factor out ref clock enable (Bjorn Helgaas) - Add initial imx6sx support (Christoph Fritz) - Add reset-gpio-active-high boolean property to DT (Petr Štetiar) - Add DT property for link gen, default to Gen1 (Tim Harvey) - dts: Specify imx6qp version of PCIe core (Andrey Smirnov) - dts: Fix PCIe reset GPIO polarity on Toradex Apalis Ixora (Petr Štetiar) Marvell Armada host bridge driver: - add DT binding for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni) - Add driver for Marvell Armada 7K/8K PCIe controller (Thomas Petazzoni) Marvell MVEBU host bridge driver: - Constify mvebu_pcie_pm_ops structure (Jisheng Zhang) - Use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS for mvebu_pcie_pm_ops (Jisheng Zhang) Microsoft Hyper-V host bridge driver: - Report resources release after stopping the bus (Vitaly Kuznetsov) - Add explicit barriers to config space access (Vitaly Kuznetsov) Renesas R-Car host bridge driver: - Select PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) Synopsys DesignWare host bridge driver: - Remove incorrect RC memory base/limit configuration (Gabriele Paoloni) - Move Root Complex setup code to dw_pcie_setup_rc() (Jisheng Zhang) TI Keystone host bridge driver: - Add error IRQ handler (Murali Karicheri) - Remove unnecessary goto statement (Murali Karicheri) Miscellaneous: - Fix spelling errors (Colin Ian King)" * tag 'pci-v4.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Disable all BAR sizing for devices with non-compliant BARs x86/PCI: Mark Broadwell-EP Home Agent 1 as having non-compliant BARs PCI: Identify Enhanced Allocation (EA) BAR Equivalent resources in sysfs PCI, of: Move PCI I/O space management to PCI core code PCI: generic, thunder: Use generic ECAM API PCI: Provide common functions for ECAM mapping PCI: hv: Add explicit barriers to config space access PCI: Use cached copy of PCI_EXP_SLTCAP_HPC bit PCI: Add Downstream Port Containment driver PCI: Add Downstream Port Containment portdrv service type PCI: Widen portdrv service type from 4 bits to 8 bits PCI: designware: Remove incorrect RC memory base/limit configuration PCI: hv: Report resources release after stopping the bus ARM: dts: imx6qp: Specify imx6qp version of PCIe core PCI: imx6: Implement reset sequence for i.MX6+ PCI: imx6: Use enum instead of bool for variant indicator PCI: thunder: Don't clobber read-only bits in bridge config registers thunderbolt: Fix double free of drom buffer PCI: rcar: Select PCI_MSI_IRQ_DOMAIN PCI: armada: Add driver for Marvell Armada 7K/8K PCIe controller ...
2016-05-17Merge branches 'pci/arm64' and 'pci/host-hv' into nextBjorn Helgaas
* pci/arm64: PCI, of: Move PCI I/O space management to PCI core code PCI: generic, thunder: Use generic ECAM API PCI: Provide common functions for ECAM mapping * pci/host-hv: PCI: hv: Add explicit barriers to config space access
2016-05-12PCI: generic, thunder: Use generic ECAM APIJayachandran C
Use functions provided by drivers/pci/ecam.h for mapping the config space in drivers/pci/host/pci-host-common.c, and update its users to use 'struct pci_config_window' and 'struct pci_ecam_ops'. The changes are mostly to use 'struct pci_config_window' in place of 'struct gen_pci'. Some of the fields of gen_pci were only used temporarily and can be eliminated by using local variables or function arguments, these are not carried over to struct pci_config_window. pci-thunder-ecam.c and pci-thunder-pem.c are the only users of the pci_host_common_probe function and the gen_pci structure; these have been updated to use the new API as well. The patch does not introduce any functional changes other than a very minor one: with the new code, on 64-bit platforms, we do just a single ioremap for the whole config space. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit (git 2.34.1) at 2024-06-07 18:52:33 +0000