summaryrefslogtreecommitdiff
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2019-12-16pinctrl: ingenic: Fixup PIN_CONFIG_OUTPUT configPaul Cercueil
JZ4760 support was added in parallel of the previous patch so this one slipped through. The first SoC to use the new register is the JZ4760 and not the JZ4770, fix it here. Fixes: 7009d046a601 ("pinctrl: ingenic: Handle PIN_CONFIG_OUTPUT config") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191210164446.53912-1-paul@crapouillou.net [Folded into OF dependency] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13pinctrl: Modify Kconfig to fix linker errorRahul Tanwar
Fix below linker error ld: drivers/pinctrl/pinctrl-equilibrium.o: in function `pinconf_generic_dt_node_to_map_all': pinctrl-equilibrium.c:(.text+0xb): undefined reference to `pinconf_generic_dt_node_to_map' Caused by below commit 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC") by adding 'depends on OF' in Kconfig driver entry. Reported-by: Randy Dunlap <rdunlap@infradead.org>> Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/ba937f271d1a2173828a2325990d62cb36d61595.1575514110.git.rahul.tanwar@linux.intel.com Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-13Merge tag 'intel-pinctrl-v5.5-2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes intel-pinctrl for v5.5-2 * Fix Baytrail silicon issue by using a global lock * Fix North community pin names that user will assume their functions * Convert Cherryview and Baytrail to pass IRQ chip along with GPIO one The following is an automated git shortlog grouped by driver: baytrail: - Pass irqchip when adding gpiochip - Add GPIO <-> pin mapping ranges via callback - Update North Community pin list - Really serialize all register accesses cherryview: - Pass irqchip when adding gpiochip - Add GPIO <-> pin mapping ranges via callback - Split out irq hw-init into a separate helper function
2019-12-13pinctrl: pinmux: fix a possible null pointer in pinmux_can_be_used_for_gpioAlexandre Torgue
This commit adds a check on ops pointer to avoid a kernel panic when ops->strict is used. Indeed, on some pinctrl driver (at least for pinctrl-stmfx) the pinmux ops is not implemented. Let's assume than gpio can be used in this case. Fixes: 472a61e777fe ("pinctrl/gpio: Take MUX usage into account") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Link: https://lore.kernel.org/r/20191204144106.10876-1-alexandre.torgue@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-12pinctrl: aspeed-g6: Fix LPC/eSPI mux configurationAndrew Jeffery
Early revisions of the AST2600 datasheet are conflicted about the state of the LPC/eSPI strapping bit (SCU510[6]). Conversations with ASPEED determined that the reference pinmux configuration tables were in error and the SCU documentation contained the correct configuration. Update the driver to reflect the state described in the SCU documentation. Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20191202050110.15340-1-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-12-09pinctrl: cherryview: Pass irqchip when adding gpiochipHans de Goede
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-09pinctrl: cherryview: Add GPIO <-> pin mapping ranges via callbackHans de Goede
When IRQ chip is instantiated via GPIO library flow, the few functions, in particular the ACPI event registration mechanism, on some of ACPI based platforms expect that the pin ranges are initialized to that point. Add GPIO <-> pin mapping ranges via callback in the GPIO library flow. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-09pinctrl: cherryview: Split out irq hw-init into a separate helper functionHans de Goede
Split out irq hw-init into a separate chv_gpio_irq_init_hw() function. This is a preparation patch for passing the irqchip when adding the gpiochip. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-09pinctrl: baytrail: Pass irqchip when adding gpiochipAndy Shevchenko
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2019-12-09pinctrl: baytrail: Add GPIO <-> pin mapping ranges via callbackAndy Shevchenko
When IRQ chip is instantiated via GPIO library flow, the few functions, in particular the ACPI event registration mechanism, on some of ACPI based platforms expect that the pin ranges are initialized to that point. Add GPIO <-> pin mapping ranges via callback in the GPIO library flow. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com>
2019-12-09pinctrl: baytrail: Update North Community pin listAndy Shevchenko
Update North Community pin list to be more clear about pin functions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-12-09pinctrl: baytrail: Really serialize all register accessesHans de Goede
Commit 39ce8150a079 ("pinctrl: baytrail: Serialize all register access") added a spinlock around all register accesses because: "There is a hardware issue in Intel Baytrail where concurrent GPIO register access might result reads of 0xffffffff and writes might get dropped completely." Testing has shown that this does not catch all cases, there are still 2 problems remaining 1) The original fix uses a spinlock per byt_gpio device / struct, additional testing has shown that this is not sufficient concurent accesses to 2 different GPIO banks also suffer from the same problem. This commit fixes this by moving to a single global lock. 2) The original fix did not add a lock around the register accesses in the suspend/resume handling. Since pinctrl-baytrail.c is using normal suspend/resume handlers, interrupts are still enabled during suspend/resume handling. Nothing should be using the GPIOs when they are being taken down, _but_ the GPIOs themselves may still cause interrupts, which are likely to use (read) the triggering GPIO. So we need to protect against concurrent GPIO register accesses in the suspend/resume handlers too. This commit fixes this by adding the missing spin_lock / unlock calls. The 2 fixes together fix the Acer Switch 10 SW5-012 getting completely confused after a suspend resume. The DSDT for this device has a bug in its _LID method which reprograms the home and power button trigger- flags requesting both high and low _level_ interrupts so the IRQs for these 2 GPIOs continuously fire. This combined with the saving of registers during suspend, triggers concurrent GPIO register accesses resulting in saving 0xffffffff as pconf0 value during suspend and then when restoring this on resume the pinmux settings get all messed up, resulting in various I2C busses being stuck, the wifi no longer working and often the tablet simply not coming out of suspend at all. Cc: stable@vger.kernel.org Fixes: 39ce8150a079 ("pinctrl: baytrail: Serialize all register access") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-12-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Ingo Molnar: "Most of the IRQ subsystem changes in this cycle were irq-chip driver updates: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes There's also the series from Frederic Weisbecker that fixes memory ordering bugs for the irq-work logic, whose primary fix is to turn work->irq_work.flags into an atomic variable and then convert the complex (and buggy) atomic_cmpxchg() loop in irq_work_claim() into a much simpler atomic_fetch_or() call. There are also various smaller cleanups" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOs pinctrl/msm: Setup GPIO chip in hierarchy irqchip/qcom-pdc: Add irqchip set/get state calls irqchip/qcom-pdc: Add irqdomain for wakeup capable GPIOs irqchip/qcom-pdc: Do not toggle IRQ_ENABLE during mask/unmask irqchip/qcom-pdc: Update max PDC interrupts of/irq: Document properties for wakeup interrupt parent genirq: Introduce irq_chip_get/set_parent_state calls irqdomain: Add bus token DOMAIN_BUS_WAKEUP genirq: Fix function documentation of __irq_alloc_descs() irq_work: Fix IRQ_WORK_BUSY bit clearing irqchip/ti-sci-inta: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(...)) irq_work: Slightly simplify IRQ_WORK_PENDING clearing irq_work: Fix irq_work_claim() memory ordering irq_work: Convert flags to atomic_t irqchip: Ingenic: Add process for more than one irq at the same time. irqchip: ingenic: Alloc generic chips from IRQ domain irqchip: ingenic: Get virq number from IRQ domain irqchip: ingenic: Error out if IRQ domain creation failed irqchip: ingenic: Drop redundant irq_suspend / irq_resume functions ...
2019-11-28pinctrl: Fix warning by adding missing MODULE_LICENSERahul Tanwar
Fix below build warning WARNING: modpost: missing MODULE_LICENSE() in drivers/pinctrl/pinctrl-equilibrium.o Introduced by commit 1948d5c51dba ("pinctrl: Add pinmux & GPIO controller driver for a new SoC") by adding missing MODULE_LICENSE. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/20191128080832.13529-2-rahul.tanwar@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-27Merge tag 'pinctrl-v5.5-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v5.5. It is pretty much business as usual, the most interesting thing I think is the pin controller for a new Intel chip called Lightning Mountain, which is according to news reports some kind of embedded network processor and what is surprising about it is that Intel have decided to use device tree to describe the system rather than ACPI that they have traditionally favored. Core changes: - Avoid taking direct references to device tree-supplied device names: these may changed at runtime under certain circumstances to kstrdup them. GPIO related: - Work is ongoing to move to passing the irqchip along as a templated struct gpio_irq_chip when adding a standard gpiolib-based irqchip to a GPIO controller, a few patches in this cycle switches a few pin control drivers over to using this method. New hardware support: - Intel Lightning Mountain SoC pin controller and GPIO support, a first Intel platform to use device tree rather than ACPI to configure the system. News reports says that this SoC is a network processor. - Qualcomm MSM8976 and MSM8956 - Qualcomm PMIC GPIO now also supports PM6150 and PM6150L - Qualcomm SPMI MPP and SPMI GPIO for PM8950 and PMI8950 - Rockchip RK3308 - Renesas R8A77961 - Allwinner Meson-A1 Driver improvements: - get_multiple and set_multiple support for the AT91-PIO4 driver. - Convert Qualcomm SSBI GPIO to use the hierarchical IRQ helpers in the GPIOlib irqchip" * tag 'pinctrl-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (93 commits) pinctrl: ingenic: Add OTG VBUS pin for the JZ4770 pinctrl: ingenic: Handle PIN_CONFIG_OUTPUT config pinctrl: Fix Kconfig indentation pinctrl: lewisburg: Update pin list according to v1.1v6 MAINTAINERS: Replace my email by one @kernel.org pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type() dt-bindings: pinctrl: intel: Add for new SoC pinctrl: Add pinmux & GPIO controller driver for a new SoC pinctrl: rza1: remove unnecessary static inline function pinctrl: meson: add pinctrl driver support for Meson-A1 SoC pinctrl: meson: add a new callback for SoCs fixup pinctrl: nomadik: db8500: Add mc0_a_2 pin group without direction control dt-bindings: pinctrl: Convert generic pin mux and config properties to schema pinctrl: cherryview: Missed type change to unsigned int pinctrl: intel: Missed type change to unsigned int pinctrl: use devm_platform_ioremap_resource() to simplify code pinctrl: just return if no valid maps dt-bindings: pinctrl: qcom-pmic-mpp: Add support for PM/PMI8950 pinctrl: qcom: spmi-mpp: Add PM/PMI8950 compatible strings dt-bindings: pinctrl: qcom-pmic-gpio: Add support for PM/PMI8950 ...
2019-11-21pinctrl: ingenic: Add OTG VBUS pin for the JZ4770Paul Cercueil
Add pin mux configuration for the OTG VBUS pin of the JZ4770. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191119155211.102527-2-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: ingenic: Handle PIN_CONFIG_OUTPUT configPaul Cercueil
This makes the driver support the 'output-low' and 'output-high' devicetree properties in gpio-hog sub-nodes. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20191119155211.102527-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: Fix Kconfig indentationKrzysztof Kozlowski
Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like: $ sed -e 's/^ /\t/' -i */Kconfig Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1574306382-32516-1-git-send-email-krzk@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: lewisburg: Update pin list according to v1.1v6Andy Shevchenko
Version 1.1v6 of pin list has some changes in pin names for Intel Lewisburg. Update the driver accordingly. Note, it reveals the bug in the driver that misses two pins in GPP_L and has rather two extra ones. That's why the ordering of some groups is changed. Fixes: e480b745386e ("pinctrl: intel: Add Intel Lewisburg GPIO support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20191120133739.54332-1-andriy.shevchenko@linux.intel.com Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: armada-37xx: Fix irq mask access in armada_37xx_irq_set_type()Gregory CLEMENT
As explained in the following commit a9a1a4833613 ("pinctrl: armada-37xx: Fix gpio interrupt setup") the armada_37xx_irq_set_type() function can be called before the initialization of the mask field. That means that we can't use this field in this function and need to workaround it using hwirq. Fixes: 30ac0d3b0702 ("pinctrl: armada-37xx: Add edge both type gpio irq support") Cc: stable@vger.kernel.org Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20191115155752.2562-1-gregory.clement@bootlin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: Add pinmux & GPIO controller driver for a new SoCRahul Tanwar
Intel Lightning Mountain SoC has a pinmux controller & GPIO controller IP which controls pin multiplexing & configuration including GPIO functions selection & GPIO attributes configuration. This IP is not based on & does not have anything in common with Chassis specification. The pinctrl drivers under pinctrl/intel/* are all based upon Chassis spec compliant pinctrl IPs. So this driver doesn't fit & can not use pinctrl framework under pinctrl/intel/* and it requires a separate new driver. Add a new GPIO & pin control framework based driver for this IP. Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com> Link: https://lore.kernel.org/r/33e649758b70490f01724a887c490d5008c7656d.1573797249.git.rahul.tanwar@linux.intel.com Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21pinctrl: rza1: remove unnecessary static inline functionMatti Vaittinen
Having static inline oneliner does not benefit too much when it is only called from another oneliner function. Remove some of the 'onion'. This simplifies also the coming usage of the gpiolib defines. We can do conversion from chip bits to gpiolib direction defines as last step in the get_direction callback. Drivers can use chip specific values in driver internal functions and do conversion only once. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191113071045.GA22110@localhost.localdomain Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-20Merge tag 'irqchip-5.5' of ↵Thomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip updates from Marc Zyngier: - Qualcomm PDC wakeup interrupt support - Layerscape external IRQ support - Broadcom bcm7038 PM and wakeup support - Ingenic driver cleanup and modernization - GICv3 ITS preparation for GICv4.1 updates - GICv4 fixes - Various cleanups
2019-11-19pinctrl: meson: add pinctrl driver support for Meson-A1 SoCQianggui Song
Meson A1 SoC share the same register layout of pinmux with previous Meson-G12A, however there is difference for gpio and pin config register in A1. The main difference is that registers before A1 are grouped by function while those of A1 are by bank. The new register layout is as below: /* first bank */ /* addr */ - P_PADCTRL_GPIOP_I base + 0x00 << 2 - P_PADCTRL_GPIOP_O base + 0x01 << 2 - P_PADCTRL_GPIOP_OEN base + 0x02 << 2 - P_PADCTRL_GPIOP_PULL_EN base + 0x03 << 2 - P_PADCTRL_GPIOP_PULL_UP base + 0x04 << 2 - P_PADCTRL_GPIOP_DS base + 0x05 << 2 /* second bank */ - P_PADCTRL_GPIOB_I base + 0x10 << 2 - P_PADCTRL_GPIOB_O base + 0x11 << 2 - P_PADCTRL_GPIOB_OEN base + 0x12 << 2 - P_PADCTRL_GPIOB_PULL_EN base + 0x13 << 2 - P_PADCTRL_GPIOB_PULL_UP base + 0x14 << 2 - P_PADCTRL_GPIOB_DS base + 0x15 << 2 Each bank contains at least 6 registers to be configured, if one bank has more than 16 gpios, an extra P_PADCTRL_GPIO[X]_DS_EXT is included. Between two adjacent P_PADCTRL_GPIO[X]_I, there is an offset 0x10, that is to say, for third bank, the offsets will be 0x20,0x21,0x22,0x23,0x24 ,0x25 according to above register layout. For previous chips, registers are grouped according to their functions while registers of A1 are according to bank.Also note that there is no AO bank any more in A1. Current Meson pinctrl driver can cover such change by using base address of GPIO as that of drive-strength. While simply giving reg_ds = reg_pullen make wrong value to reg_ds for Socs that do not support drive-strength like AXG.To make things simple, add an extra dt parser function for a1 and remain the old dt parser function for only reg parsing. Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Link: https://lore.kernel.org/r/1573819429-6937-3-git-send-email-qianggui.song@amlogic.com Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-19pinctrl: meson: add a new callback for SoCs fixupQianggui Song
In meson_pinctrl_parse_dt, it contains two parts: reg parsing and SoC relative fixup for AO. Several fixups in the same code make it hard to maintain, so move all fixups to each SoC's callback and make meson_pinctrl_parse_dt just do the reg parsing, separate these two parts.Overview of all current Meson SoCs fixup is as below: +------+--------------------------------------+--------------------------+ | | | | | SoC | EE domain | AO domain | +------+--------------------------------------+--------------------------+ |m8 | parse regs: | parse regs: | |m8b | gpio,mux,pull,pull-enable(skip ds) | gpio,mux,pull(skip ds)| |gxl | fixup: | fixup: | |gxbb | no | pull-enable = pull; | |axg | | | +------+--------------------------------------+--------------------------+ |g12a | parse regs: | parse regs: | |sm1 | gpio,mux,pull,pull-enable,ds | gpio,mux,ds | | | fixup: | fixup: | | | no | pull = gpio; | | | | pull-enable = gpio; | +------+--------------------------------------+--------------------------+ |a1 or | parse regs: | |later | gpio/mux (without ao domain) | |SoCs | fixup: | | | pull = gpio; pull-enable = gpio; ds = gpio; | +------+-----------------------------------------------------------------+ Since m8-axg share the same ao fixup, make a common function meson8_aobus_parse_dt_extra to do the job. Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Link: https://lore.kernel.org/r/1573819429-6937-2-git-send-email-qianggui.song@amlogic.com Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-19pinctrl: nomadik: db8500: Add mc0_a_2 pin group without direction controlStephan Gerhold
Some devices do not make use of the CMD0/DAT0/DAT2 direction control pins of the MMC/SD card 0 interface. In this case we should leave those pins unconfigured. A similar case already exists for "mc1_a_1" vs "mc1_a_2" when the MC1_FBCLK pin is not used. Add a new "mc0_a_2" pin group which is equal to "mc0_a_1" except with the MC0_CMDDIR, MC0_DAT0DIR and MC0_DAT2DIR pins removed. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20191117205439.239211-1-stephan@gerhold.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-16pinctrl/sdm845: Add PDC wakeup interrupt map for GPIOsLina Iyer
Add interrupt parents for wakeup capable GPIOs for Qualcomm SDM845 SoC. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-10-git-send-email-ilina@codeaurora.org
2019-11-16pinctrl/msm: Setup GPIO chip in hierarchyLina Iyer
Some GPIOs are marked as wakeup capable and are routed to another interrupt controller that is an always-domain and can detect interrupts even when most of the SoC is powered off. The wakeup interrupt controller wakes up the GIC and replays the interrupt at the GIC. Setup the TLMM irqchip in hierarchy with the wakeup interrupt controller and ensure the wakeup GPIOs are handled correctly. Co-developed-by: Maulik Shah <mkshah@codeaurora.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/1573855915-9841-9-git-send-email-ilina@codeaurora.org ---- Changes in v2: - Address review comments - Fix Co-developed-by tag Changes in v1: - Address minor review comments - Remove redundant call to set irq handler - Move irq_domain_qcom_handle_wakeup() to this patch Changes in RFC v2: - Rebase on top of GPIO hierarchy support in linux-next - Set the chained irq handler for summary line
2019-11-13Merge tag 'intel-pinctrl-v5.5-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.5-1 * Intel Tigerlake pin controller support has been added. * Miscellaneous fixes to the main and Cherryview drivers. * Refactoring of the context restoring in the main driver. The following is an automated git shortlog grouped by driver: cherryview: - Missed type change to unsigned int - Allocate IRQ chip dynamic - Fix spelling mistake in the comment - Fix irq_valid_mask calculation intel: - Missed type change to unsigned int - Add Intel Tiger Lake pin controller support - Use helper to restore register values on ->resume() - Drop level from warning to debug in intel_restore_hostown() - Introduce intel_restore_intmask() helper - Introduce intel_restore_hostown() helper - Introduce intel_restore_padcfg() helper - Avoid potential glitches if pin is in GPIO mode
2019-11-13Merge tag 'v5.4-rc5' into develLinus Walleij
Linux 5.4-rc5
2019-11-07pinctrl: cherryview: Missed type change to unsigned intAndy Shevchenko
We converted 'unsigned' type to be 'unsigned int' in the driver, but there are couple of leftovers. So, finish the task now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-11-07pinctrl: intel: Missed type change to unsigned intAndy Shevchenko
We converted 'unsigned' type to be 'unsigned int' in the driver, but there are couple of leftovers. So, finish the task now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-11-07pinctrl: stmfx: fix valid_mask init sequenceAmelie Delaunay
With stmfx_pinctrl_gpio_init_valid_mask callback, gpio_valid_mask was used to initialize gpiochip valid_mask for gpiolib. But gpio_valid_mask was not yet initialized. gpio_valid_mask required gpio-ranges to be registered, this is the case after gpiochip_add_data call. But init_valid_mask callback is also called under gpiochip_add_data. gpio_valid_mask initialization cannot be moved before gpiochip_add_data because gpio-ranges are not registered. So, it is not possible to use init_valid_mask callback. To avoid this issue, get rid of valid_mask and rely on ranges. Fixes: da9b142ab2c5 ("pinctrl: stmfx: Use the callback to populate valid_mask") Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Link: https://lore.kernel.org/r/20191104100908.10880-1-amelie.delaunay@st.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05Merge tag 'samsung-pinctrl-5.5' of ↵Linus Walleij
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel Samsung pinctrl drivers changes for v5.5 Fix several device node refcnt leaks (missing of_node_put()) in several drivers.
2019-11-05pinctrl: use devm_platform_ioremap_resource() to simplify codeYueHaibing
devm_platform_ioremap_resource() internally have platform_get_resource() and devm_ioremap_resource() in it. So instead of calling them separately use devm_platform_ioremap_resource() directly. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20191104142654.39256-1-yuehaibing@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: just return if no valid mapslijiazi
If there is a problem with a pinctrl node of a device, for example, config child node do not have prop specified in dt_params, num_maps maybe 0. On this condition, no need remember this map. Signed-off-by: lijiazi <lijiazi@xiaomi.com> Link: https://lore.kernel.org/r/29421e7720443a2454830963186f00583c76ce1e.1572588550.git.lijiazi@xiaomi.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: qcom: spmi-mpp: Add PM/PMI8950 compatible stringsAngeloGioacchino Del Regno
PM8950 and PMI8950 have four MPPs and this driver is compatible. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20191031103507.30678-4-kholk11@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-05pinctrl: qcom: spmi-gpio: Add PM/PMI8950 compatibilityAngeloGioacchino Del Regno
The PM8950 features 8 GPIOs with hole in 3 and PMI8950 has only two; these PMICs are totally compatible with this driver. Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com> Link: https://lore.kernel.org/r/20191031103507.30678-2-kholk11@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04pinctrl: bcm: nsp: implement get_directionChris Packham
The get_direction api is strongly recommended to be implemented. In fact if it is not implemented gpio-hogs will not get the correct direction. Add an implementation of get_direction for the nsp-gpio driver. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20191104001819.2300-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04pinctrl: bcm: nsp: use gpiolib infrastructure for interruptsChris Packham
Use more of the gpiolib infrastructure for handling interrupts. The root interrupt still needs to be handled manually as it is shared with other peripherals on the SoC. This will allow multiple instances of this driver to be supported and will clean up gracefully on failure thanks to the device managed APIs. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20191104001819.2300-2-chris.packham@alliedtelesis.co.nz Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler()Ben Dooks (Codethink)
The regs pointer in amd_gpio_irq_handler() should have __iomem on it, so add that to fix the following sparse warnings: drivers/pinctrl/pinctrl-amd.c:555:14: warning: incorrect type in assignment (different address spaces) drivers/pinctrl/pinctrl-amd.c:555:14: expected unsigned int [usertype] *regs drivers/pinctrl/pinctrl-amd.c:555:14: got void [noderef] <asn:2> *base drivers/pinctrl/pinctrl-amd.c:563:34: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/pinctrl-amd.c:563:34: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-amd.c:563:34: got unsigned int [usertype] * drivers/pinctrl/pinctrl-amd.c:580:34: warning: incorrect type in argument 1 (different address spaces) drivers/pinctrl/pinctrl-amd.c:580:34: expected void const volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-amd.c:580:34: got unsigned int [usertype] * drivers/pinctrl/pinctrl-amd.c:587:25: warning: incorrect type in argument 2 (different address spaces) drivers/pinctrl/pinctrl-amd.c:587:25: expected void volatile [noderef] <asn:2> *addr drivers/pinctrl/pinctrl-amd.c:587:25: got unsigned int [usertype] * Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk> Link: https://lore.kernel.org/r/20191022151154.5986-1-ben.dooks@codethink.co.uk Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-04pinctrl: qcom: sc7180: Add missing tile info in SDC_QDSD_PINGROUP/UFS_RESETRajendra Nayak
The SDC_QDSD_PINGROUP/UFS_RESET macros are missing the .tile info needed to calculate the right register offsets. Adding them here and also adjusting the offsets accordingly. Fixes: f2ae04c45b1a ("pinctrl: qcom: Add SC7180 pinctrl driver") Reported-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Link: https://lore.kernel.org/r/20191021141507.24066-1-rnayak@codeaurora.org Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-03pinctrl: at91: Enable slewrate by default on SAM9X60Codrin Ciubotariu
On SAM9X60, slewrate should be enabled on pins with a switching frequency below 50Mhz. Since most of our pins do not exceed this value, we enable slewrate by default. Pins with a switching value that exceeds 50Mhz will have to explicitly disable slewrate. This patch changes the ABI. However, the slewrate macros are only used by SAM9X60 and, at this moment, there are no device-tree files available for this platform. Suggested-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20191101092031.24896-1-codrin.ciubotariu@microchip.com Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-03Merge tag 'sh-pfc-for-v5.5-tag2' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v5.5 (take two) - Add support for the new R-Car M3-W+ (r8a77961) SoC, - Small fixes and cleanups.
2019-11-01pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_BGeert Uytterhoeven
The definitions for bit field [19:18] of the Peripheral Function Select Register 3 were accidentally copied from bit field [20], leading to duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and ET0_ETXD4 functions. Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4 enum values, and correcting the functions. Reported-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
2019-11-01pinctrl: sh-pfc: r8a7796: Add R8A77961 PFC supportGeert Uytterhoeven
Add support for the Pin Function Controller in the R-Car M3-W+ (R8A77961) SoC. R-Car M3-W+ is pin compatible with R-Car M3-W (R8A77960), which allows for both SoCs to share a driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122955.12420-4-geert+renesas@glider.be
2019-11-01pinctrl: sh-pfc: Rename PINCTRL_PFC_R8A7796 to PINCTRL_PFC_R8A77960Geert Uytterhoeven
Rename CONFIG_PINCTRL_PFC_R8A7796 for R-Car M3-W (R8A77960) to CONFIG_PINCTRL_PFC_R8A77960, to avoid confusion with R-Car M3-W+ (R8A77961), which will use CONFIG_PINCTRL_PFC_R8A77961. Extend the dependency of CONFIG_PINCTRL_PFC_R8A77960 from CONFIG_ARCH_R8A7796 to CONFIG_ARCH_R8A77960, to relax dependencies for a future rename of the SoC configuration symbol. Rename r8a7796_pinmux_info to r8a77960_pinmux_info, as it contains an r8a77960-based name. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191023122955.12420-3-geert+renesas@glider.be
2019-11-01pinctrl: sh-pfc: Do not use platform_get_irq() to count interruptsGeert Uytterhoeven
As platform_get_irq() now prints an error when the interrupt does not exist, counting interrupts by looping until failure causes the printing of scary messages like: sh-pfc e6060000.pin-controller: IRQ index 0 not found Fix this by using the platform_irq_count() helper instead. Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20191016142601.28255-1-geert+renesas@glider.be
2019-10-30pinctrl: intel: Add Intel Tiger Lake pin controller supportAndy Shevchenko
This driver adds pinctrl/GPIO support for Intel Tiger Lake SoC. The GPIO controller is based on the next generation GPIO hardware but still compatible with the one supported by the Intel core pinctrl/GPIO driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-30pinctrl: intel: Use helper to restore register values on ->resume()Andy Shevchenko
We can restore only values that had been changed and do not spam kernel log with unnecessary messages. Convert intel_gpio_update_pad_mode() to a helper function that will be used across few callers. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>