summaryrefslogtreecommitdiff
path: root/drivers/scsi/qedi
AgeCommit message (Collapse)Author
2023-08-30Merge branch '6.5/scsi-fixes' into 6.6/scsi-stagingMartin K. Petersen
Pull in the fixes tree for a commit that missed 6.5. Also resolve a trivial merge conflict in fnic. * 6.5/scsi-fixes: (36 commits) scsi: storvsc: Handle additional SRB status values scsi: snic: Fix double free in snic_tgt_create() scsi: core: raid_class: Remove raid_component_add() scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5 scsi: ufs: mcq: Fix the search/wrap around logic scsi: qedf: Fix firmware halt over suspend and resume scsi: qedi: Fix firmware halt over suspend and resume scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock scsi: lpfc: Remove reftag check in DIF paths scsi: ufs: renesas: Fix private allocation scsi: snic: Fix possible memory leak if device_add() fails scsi: core: Fix possible memory leak if device_add() fails scsi: core: Fix legacy /proc parsing buffer overflow scsi: 53c700: Check that command slot is not NULL scsi: fnic: Replace return codes in fnic_clean_pending_aborts() scsi: storvsc: Fix handling of virtual Fibre Channel timeouts scsi: pm80xx: Fix error return code in pm8001_pci_probe() scsi: zfcp: Defer fc_rport blocking until after ADISC response scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices scsi: sg: Fix checking return value of blk_get_queue() ... Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-24scsi: qedi: Remove unused declarationsYue Haibing
These declarations were never implemented, remove them. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230822143338.19120-1-yuehaibing@huawei.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-07scsi: qedi: Fix firmware halt over suspend and resumeNilesh Javali
While performing certain power-off sequences, PCI drivers are called to suspend and resume their underlying devices through PCI PM (power management) interface. However the hardware does not support PCI PM suspend/resume operations so system wide suspend/resume leads to bad MFW (management firmware) state which causes various follow-up errors in driver when communicating with the device/firmware. To fix this driver implements PCI PM suspend handler to indicate unsupported operation to the PCI subsystem explicitly, thus avoiding system to go into suspended/standby mode. Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230807093725.46829-2-njavali@marvell.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-08-07scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lockChengfeng Ye
As &qedi_percpu->p_work_lock is acquired by hard IRQ qedi_msix_handler(), other acquisitions of the same lock under process context should disable IRQ, otherwise deadlock could happen if the IRQ preempts the execution while the lock is held in process context on the same CPU. qedi_cpu_offline() is one such function which acquires the lock in process context. [Deadlock Scenario] qedi_cpu_offline() ->spin_lock(&p->p_work_lock) <irq> ->qedi_msix_handler() ->edi_process_completions() ->spin_lock_irqsave(&p->p_work_lock, flags); (deadlock here) This flaw was found by an experimental static analysis tool I am developing for IRQ-related deadlocks. The tentative patch fix the potential deadlock by spin_lock_irqsave() under process context. Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Link: https://lore.kernel.org/r/20230726125655.4197-1-dg573847474@gmail.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-05-26scsi: qedi: Replace all non-returning strlcpy with strscpyAzeem Shaikh
strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh <azeemshaikh38@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230517143509.1520387-1-azeemshaikh38@gmail.com
2023-04-24scsi: qedi: Fix use after free bug in qedi_remove()Zheng Wang
In qedi_probe() we call __qedi_probe() which initializes &qedi->recovery_work with qedi_recovery_handler() and &qedi->board_disable_work with qedi_board_disable_work(). When qedi_schedule_recovery_handler() is called, schedule_delayed_work() will finally start the work. In qedi_remove(), which is called to remove the driver, the following sequence may be observed: Fix this by finishing the work before cleanup in qedi_remove(). CPU0 CPU1 |qedi_recovery_handler qedi_remove | __qedi_remove | iscsi_host_free | scsi_host_put | //free shost | |iscsi_host_for_each_session |//use qedi->shost Cancel recovery_work and board_disable_work in __qedi_remove(). Fixes: 4b1068f5d74b ("scsi: qedi: Add MFW error recovery process") Signed-off-by: Zheng Wang <zyytlz.wz@163.com> Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-03-24scsi: iscsi: Declare SCSI host template constBart Van Assche
Make it explicit that the SCSI host template is not modified. Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20230322195515.1267197-50-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2023-02-21scsi: qedi: Remove unneeded version.h includeJesper Juhl
Remove unneeded version.h include pointed out by 'make versioncheck'. Link: https://lore.kernel.org/r/820137c2-decc-3d78-f170-7f1c0571fbb7@gmail.com Signed-off-by: Jesper Juhl <jesperjuhl76@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-11-18treewide: use get_random_u32_below() instead of deprecated functionJason A. Donenfeld
This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Reviewed-by: SeongJae Park <sj@kernel.org> # for damon Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> # for infiniband Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> # for arm Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-11treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-06-21scsi: iscsi: Fix session removal on shutdownMike Christie
When the system is shutting down, iscsid is not running so we will not get a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown will then hang waiting on userspace to remove the session. This has libiscsi force the destruction of the session from the kernel when iscsi_host_remove() is called from a driver's shutdown callout. This fixes a regression added in qedi boot with commit d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") which made qedi use the common session removal function that waits on userspace instead of rolling its own kernel based removal. Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com Fixes: d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") Tested-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-06-21scsi: qedi: Use QEDI_MODE_NORMAL for error handlingMike Christie
When handling errors that lead to host removal use QEDI_MODE_NORMAL. There is currently no difference in behavior between NORMAL and SHUTDOWN, but in a subsequent commit we will want to know when we are called from the pci_driver shutdown callout vs remove/err_handler so we know when userspace is up. Link: https://lore.kernel.org/r/20220616222738.5722-6-michael.christie@oracle.com Tested-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-04-11scsi: qedi: Fix failed disconnect handlingMike Christie
We set the qedi_ep state to EP_STATE_OFLDCONN_START when the ep is created. Then in qedi_set_path we kick off the offload work. If userspace times out the connection and calls ep_disconnect, qedi will only flush the offload work if the qedi_ep state has transitioned away from EP_STATE_OFLDCONN_START. If we can't connect we will not have transitioned state and will leave the offload work running, and we will free the qedi_ep from under it. This patch just has us init the work when we create the ep, then always flush it. Link: https://lore.kernel.org/r/20220408001314.5014-10-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-03-24Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits) scsi: scsi_ioctl: Drop needless assignment in sg_io() scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn() scsi: lpfc: Copyright updates for 14.2.0.0 patches scsi: lpfc: Update lpfc version to 14.2.0.0 scsi: lpfc: SLI path split: Refactor BSG paths scsi: lpfc: SLI path split: Refactor Abort paths scsi: lpfc: SLI path split: Refactor SCSI paths scsi: lpfc: SLI path split: Refactor CT paths scsi: lpfc: SLI path split: Refactor misc ELS paths scsi: lpfc: SLI path split: Refactor VMID paths scsi: lpfc: SLI path split: Refactor FDISC paths scsi: lpfc: SLI path split: Refactor LS_RJT paths scsi: lpfc: SLI path split: Refactor LS_ACC paths scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4 scsi: lpfc: SLI path split: Refactor lpfc_iocbq scsi: lpfc: Use kcalloc() ...
2022-02-22scsi: iscsi: Stop using the SCSI pointerBart Van Assche
Instead of storing the iSCSI task pointer and the session age in the SCSI pointer, use command-private variables. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. The list of iSCSI drivers has been obtained as follows: $ git grep -lw iscsi_host_alloc drivers/infiniband/ulp/iser/iscsi_iser.c drivers/scsi/be2iscsi/be_main.c drivers/scsi/bnx2i/bnx2i_iscsi.c drivers/scsi/cxgbi/libcxgbi.c drivers/scsi/iscsi_tcp.c drivers/scsi/libiscsi.c drivers/scsi/qedi/qedi_main.c drivers/scsi/qla4xxx/ql4_os.c include/scsi/libiscsi.h Note: it is not clear to me how the qla4xxx driver can work without this patch since it uses the scsi_cmnd::SCp.ptr member for two different purposes: - The qla4xxx driver uses this member to store a struct srb pointer. - libiscsi uses this member to store a struct iscsi_task pointer. Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Chris Leech <cleech@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: Karen Xie <kxie@chelsio.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> iscsi Link: https://lore.kernel.org/r/20220218195117.25689-26-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-02-11scsi: qedi: Fix ABBA deadlock in qedi_process_tmf_resp() and ↵Mike Christie
qedi_process_cmd_cleanup_resp() This fixes a deadlock added with commit b40f3894e39e ("scsi: qedi: Complete TMF works before disconnect") Bug description from Jia-Ju Bai: qedi_process_tmf_resp() spin_lock(&session->back_lock); --> Line 201 (Lock A) spin_lock(&qedi_conn->tmf_work_lock); --> Line 230 (Lock B) qedi_process_cmd_cleanup_resp() spin_lock_bh(&qedi_conn->tmf_work_lock); --> Line 752 (Lock B) spin_lock_bh(&conn->session->back_lock); --> Line 784 (Lock A) When qedi_process_tmf_resp() and qedi_process_cmd_cleanup_resp() are concurrently executed, the deadlock can occur. This patch fixes the deadlock by not holding the tmf_work_lock in qedi_process_cmd_cleanup_resp while holding the back_lock. The tmf_work_lock is only needed while we remove the tmf_work from the work_list. Link: https://lore.kernel.org/r/20220208185448.6206-1-michael.christie@oracle.com Fixes: b40f3894e39e ("scsi: qedi: Complete TMF works before disconnect") Cc: Manish Rangankar <mrangankar@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2022-01-31scsi: qedi: Remove redundant flush_workqueue() callsMinghao Chi (CGEL ZTE)
destroy_workqueue() already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant flush_workqueue() calls. Link: https://lore.kernel.org/r/20220127013934.1184923-1-chi.minghao@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn> Signed-off-by: CGEL ZTE <cgel.zte@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-16Merge branch '5.16/scsi-fixes' into 5.17/scsi-stagingMartin K. Petersen
Pull in the 5.16 fixes branch to resolve a conflict in the UFS driver core. Conflicts: drivers/scsi/ufs/ufshcd.c Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: qedi: Fix SYSFS_FLAG_FW_SEL_BOOT formattingFlorian Fainelli
The format used for formatting SYSFS_FLAG_FW_SEL_BOOT creates the following warning: drivers/scsi/qedi/qedi_main.c:2259:35: warning: format specifies type 'char' but the argument has type 'int' [-Wformat] rc = snprintf(buf, 3, "%hhd\n", SYSFS_FLAG_FW_SEL_BOOT); Fix this to cast the constant as a char since the intention is to print it via sysfs as a byte. Link: https://lore.kernel.org/r/20211130203813.12138-2-f.fainelli@gmail.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-12-06scsi: qedi: Fix cmd_cleanup_cmpl counter mismatch issueManish Rangankar
When issued LUN reset under heavy I/O we hit the qedi WARN_ON because of a mismatch in firmware I/O cmd cleanup request count and I/O cmd cleanup response count received. The mismatch is because of a race caused by the postfix increment of cmd_cleanup_cmpl. [qedi_clearsq:1295]:18: fatal error, need hard reset, cid=0x0 WARNING: CPU: 48 PID: 110963 at drivers/scsi/qedi/qedi_fw.c:1296 qedi_clearsq+0xa5/0xd0 [qedi] CPU: 48 PID: 110963 Comm: kworker/u130:0 Kdump: loaded Tainted: G W Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 04/15/2020 Workqueue: iscsi_conn_cleanup iscsi_cleanup_conn_work_fn [scsi_transport_iscsi] RIP: 0010:qedi_clearsq+0xa5/0xd0 [qedi] RSP: 0018:ffffac2162c7fd98 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff975213c40ab8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff9761bf816858 RDI: ffff9761bf816858 RBP: ffff975247018628 R08: 000000000000522c R09: 000000000000005b R10: 0000000000000000 R11: ffffac2162c7fbd8 R12: ffff97522e1b2be8 R13: 0000000000000000 R14: ffff97522e1b2800 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9761bf800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1a34e3e1a0 CR3: 0000000108bb2000 CR4: 0000000000350ee0 Call Trace: qedi_ep_disconnect+0x533/0x550 [qedi] ? iscsi_dbg_trace+0x63/0x80 [scsi_transport_iscsi] ? _cond_resched+0x15/0x30 ? iscsi_suspend_queue+0x19/0x40 [libiscsi] iscsi_ep_disconnect+0xb0/0x130 [scsi_transport_iscsi] iscsi_cleanup_conn_work_fn+0x82/0x130 [scsi_transport_iscsi] process_one_work+0x1a7/0x360 ? create_worker+0x1a0/0x1a0 worker_thread+0x30/0x390 ? create_worker+0x1a0/0x1a0 kthread+0x116/0x130 ? kthread_flush_work_fn+0x10/0x10 ret_from_fork+0x22/0x40 ---[ end trace 5f1441f59082235c ]--- Link: https://lore.kernel.org/r/20211203095218.5477-1-mrangankar@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-29scsi: qedi: Remove set but unused 'page' variableFlorian Fainelli
The variable 'page' is set but never used throughout qedi_alloc_bdq(). Therefore remove it. Link: https://lore.kernel.org/r/20211126201708.27140-2-f.fainelli@gmail.com Reported-by: kernel test robot <lkp@intel.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-05Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull SCSI updates from James Bottomley: "This consists of the usual driver updates (ufs, smartpqi, lpfc, target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug fixes. Notable core changes are the removal of scsi->tag which caused some churn in obsolete drivers and a sweep through all drivers to call scsi_done() directly instead of scsi->done() which removes a pointer indirection from the hot path and a move to register core sysfs files earlier, which means they're available to KOBJ_ADD processing, which necessitates switching all drivers to using attribute groups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits) scsi: lpfc: Update lpfc version to 14.0.0.3 scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss scsi: lpfc: Fix link down processing to address NULL pointer dereference scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine scsi: lpfc: Correct sysfs reporting of loop support after SFP status change scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup() scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer scsi: ufs: mediatek: Avoid sched_clock() misuse scsi: mpt3sas: Make mpt3sas_dev_attrs static scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions scsi: target: core: Stop using bdevname() scsi: aha1542: Use memcpy_{from,to}_bvec() scsi: sr: Add error handling support for add_disk() scsi: sd: Add error handling support for add_disk() scsi: target: Perform ALUA group changes in one step scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path scsi: target: Fix alua_tg_pt_gps_count tracking scsi: target: Fix ordered tag handling ...
2021-10-16scsi: qedi: Switch to attribute groupsBart Van Assche
struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-39-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04qed: Update the TCP active termination 2 MSL timer ("TIME_WAIT")Prabhakar Kushwaha
Initialize 2 MSL timeout value used for the TCP TIME_WAIT state to non-zero default. This patch also removes magic number from qedi/qedi_main.c. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Update TCP silly-window-syndrome timeout for iwarp, scsiNikolay Assa
Update TCP silly-window-syndrome timeout, for the cases where initiator's small TCP window size prevents FW from transmitting packets on the connection. Timeout causes FW to retransmit window probes if needed, preventing I/O stall if initiator ignores first window probe. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nikolay Assa <nassa@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-04qed: Remove e4_ and _e4 from FW HSIShai Malin
The existing qed/qede/qedr/qedi/qedf code uses chip-specific naming in structures, functions, variables and defines in FW HSI (Hardware Software Interface). The new FW version introduced a generic naming convention in HSI in-which the same code will be used across different versions for simpler maintainability. It also eases in providing support for new features. With this patch every "_e4" or "e4_" prefix or suffix is not needed anymore and it will be removed. Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Javed Hasan <jhasan@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Omkar Kulkarni <okulkarni@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16scsi: qedi: Fix error codes in qedi_alloc_global_queues()Dan Carpenter
This function had some left over code that returned 1 on error instead negative error codes. Convert everything to use negative error codes. The caller treats all non-zero returns the same so this does not affect run time. A couple places set "rc" instead of "status" so those error paths ended up returning success by mistake. Get rid of the "rc" variable and use "status" everywhere. Remove the bogus "status = 0" initialization, as a future proofing measure so the compiler will warn about uninitialized error codes. Link: https://lore.kernel.org/r/20210810084753.GD23810@kili Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qedi: Add support for fastpath doorbell recoveryShai Malin
Driver fastpath employs doorbells to indicate to the device that work is available. Each doorbell translates to a message sent to the device over PCI. These messages are queued by the doorbell queue HW block, and handled by the HW. If a sufficient amount of CPU cores are sending messages at a sufficient rate, the queue can overflow, and messages can be dropped. There are many entities in the driver which can send doorbell messages. When overflow happens, a fatal HW attention is indicated, and the Doorbell HW block stops accepting new doorbell messages until recovery procedure is done. When overflow occurs, all doorbells are dropped. Since doorbells are aggregatives, if more doorbells are sent nothing has to be done. But if the "last" doorbell is dropped, the doorbelling entity doesn’t know this happened, and may wait forever for the device to perform the action. The doorbell recovery mechanism addresses just that - it sends the last doorbell of every entity. [mkp: fix missing brackets reported by Guenter Roeck] Link: https://lore.kernel.org/r/20210804221412.5048-1-smalin@marvell.com Co-developed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11scsi: qedi: Use scsi_cmd_to_rq() instead of scsi_cmnd.requestBart Van Assche
Prepare for removal of the request pointer by using scsi_cmd_to_rq() instead. This patch does not change any functionality. Link: https://lore.kernel.org/r/20210809230355.8186-37-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-22scsi: qedi: Use DEVICE_ATTR_RO() macroZhen Lei
Use DEVICE_ATTR_RO() macro helper instead of plain DEVICE_ATTR(), which makes the code a bit shorter and easier to read. Link: https://lore.kernel.org/r/20210616034419.725-2-thunder.leizhen@huawei.com Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-09scsi: qedi: Fix host removal with running sessionsMike Christie
qedi_clear_session_ctx() could race with the in-kernel or userspace driven recovery/removal and we could access a NULL conn or do a double free. We should be using iscsi_host_remove() to start the removal process from the driver. It will start the in-kernel recovery and notify userspace that the driver's scsi_hosts are being removed. iscsid will then drive the session removal like is done when the logout command is run. When the sessions are removed, iscsi_host_remove() will return so qedi can finish knowing there are no running sessions and no new sessions will be allowed. This also fixes an issue where we check for a NULL conn after already accessing it introduced in commit 27e986289e73 ("scsi: iscsi: Drop suspend calls from ep_disconnect") by just removing the function completely. Link: https://lore.kernel.org/r/20210609192709.5094-1-michael.christie@oracle.com Fixes: 27e986289e73 ("scsi: iscsi: Drop suspend calls from ep_disconnect") Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Wake up if cmd_cleanup_req is setMike Christie
If we got a response then we should always wake up the conn. For both the cmd_cleanup_req == 0 or cmd_cleanup_req > 0, we shouldn't dig into iscsi_itt_to_task because we don't know what the upper layers are doing. We can also remove the qedi_clear_task_idx call here because once we signal success libiscsi will loop over the affected commands and end up calling the cleanup_task callout which will release it. Link: https://lore.kernel.org/r/20210525181821.7617-29-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Complete TMF works before disconnectMike Christie
We need to make sure that abort and reset completion work has completed before ep_disconnect returns. After ep_disconnect we can't manipulate cmds because libiscsi will call conn_stop and take onwership. We are trying to make sure abort work and reset completion work has completed before we do the cmd clean up in ep_disconnect. The problem is that: 1. the work function sets the QEDI_CONN_FW_CLEANUP bit, so if the work was still pending we would not see the bit set. We need to do this before the work is queued. 2. If we had multiple works queued then we could break from the loop in qedi_ep_disconnect early because when abort work 1 completes it could clear QEDI_CONN_FW_CLEANUP. qedi_ep_disconnect could then see that before work 2 has run. 3. A TMF reset completion work could run after ep_disconnect starts cleaning up cmds via qedi_clearsq. ep_disconnect's call to qedi_clearsq -> qedi_cleanup_all_io would might think it's done cleaning up cmds, but the reset completion work could still be running. We then return from ep_disconnect while still doing cleanup. This replaces the bit with a counter to track the number of queued TMF works, and adds a bool to prevent new works from starting from the completion path once a ep_disconnect starts. Link: https://lore.kernel.org/r/20210525181821.7617-28-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Pass send_iscsi_tmf task to abortMike Christie
qedi_abort_work knows what task to abort so just pass it to send_iscsi_tmf. Link: https://lore.kernel.org/r/20210525181821.7617-27-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Fix cleanup session block/unblock useMike Christie
Drivers shouldn't be calling block/unblock session for cmd cleanup because the functions can change the session state from under libiscsi. This adds a new a driver level bit so it can block all I/O the host while it drains the card. Link: https://lore.kernel.org/r/20210525181821.7617-26-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Fix TMF session block/unblock useMike Christie
Drivers shouldn't be calling block/unblock session for tmf handling because the functions can change the session state from under libiscsi. iscsi_queuecommand's call to iscsi_prep_scsi_cmd_pdu-> iscsi_check_tmf_restrictions will prevent new cmds from being sent to qedi after we've started handling a TMF. So we don't need to try and block it in the driver, and we can remove these block calls. Link: https://lore.kernel.org/r/20210525181821.7617-25-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Use GFP_NOIO for TMF allocationMike Christie
We run from a workqueue with no locks held so use GFP_NOIO. Link: https://lore.kernel.org/r/20210525181821.7617-24-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Fix TMF tid allocationMike Christie
qedi_iscsi_abort_work and qedi_tmf_work both allocate a tid then call qedi_send_iscsi_tmf which also allocates a tid. This removes the tid allocation from the callers. Link: https://lore.kernel.org/r/20210525181821.7617-23-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Fix use after free during abort cleanupMike Christie
If qedi_tmf_work's qedi_wait_for_cleanup_request call times out we will also force the clean up of the qedi_work_map but qedi_process_cmd_cleanup_resp could still be accessing the qedi_cmd. To fix this issue we extend where we hold the tmf_work_lock and back_lock so the qedi_process_cmd_cleanup_resp access is serialized with the cleanup done in qedi_tmf_work and any completion handling for the iscsi_task. Link: https://lore.kernel.org/r/20210525181821.7617-22-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Fix race during abort timeoutsMike Christie
If the SCSI cmd completes after qedi_tmf_work calls iscsi_itt_to_task then the qedi qedi_cmd->task_id could be freed and used for another cmd. If we then call qedi_iscsi_cleanup_task with that task_id we will be cleaning up the wrong cmd. Wait to release the task_id until the last put has been done on the iscsi_task. Because libiscsi grabs a ref to the task when sending the abort, we know that for the non-abort timeout case that the task_id we are referencing is for the cmd that was supposed to be aborted. A latter commit will fix the case where the abort times out while we are running qedi_tmf_work. Link: https://lore.kernel.org/r/20210525181821.7617-21-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: qedi: Fix null ref during abort handlingMike Christie
If qedi_process_cmd_cleanup_resp finds the cmd it frees the work and sets list_tmf_work to NULL, so qedi_tmf_work should check if list_tmf_work is non-NULL when it wants to force cleanup. Link: https://lore.kernel.org/r/20210525181821.7617-20-michael.christie@oracle.com Reviewed-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Fix shost->max_id useMike Christie
The iscsi offload drivers are setting the shost->max_id to the max number of sessions they support. The problem is that max_id is not the max number of targets but the highest identifier the targets can have. To use it to limit the number of targets we need to set it to max sessions - 1, or we can end up with a session we might not have preallocated resources for. Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Rel ref after iscsi_lookup_endpoint()Mike Christie
Subsequent commits allow the kernel to do ep_disconnect. In that case we will have to get a proper refcount on the ep so one thread does not delete it from under another. Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Drop suspend calls from ep_disconnectMike Christie
libiscsi will now suspend the send/tx queue for the drivers so we can drop it from the drivers ep_disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-4-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-02scsi: iscsi: Stop queueing during ep_disconnectMike Christie
During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new I/O but every driver except cxgbi and iscsi_tcp can still get I/O from __iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before ep_disconnect. This could happen if we were terminating the session, and the logout timed out before it was even sent to libiscsi. Fix the issue by adding a helper which reverses the bind_conn call that allows new I/O to be queued. Drivers implementing ep_disconnect can use this to make sure new I/O is not queued to them when handling the disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-05Merge branch '5.12/scsi-fixes' into 5.13/scsi-stagingMartin K. Petersen
Pull 5.12/scsi-fixes into the 5.13 SCSI tree to provide a baseline for some UFS changes that would otherwise cause conflicts during the merge. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-29scsi: qedi: Remove redundant assignment to variable errColin Ian King
Variable err is assigned -ENOMEM followed by an error return path via label err_udev that does not access the variable and returns with the -ENOMEM error return code. The assignment to err is redundant and can be removed. Link: https://lore.kernel.org/r/20210327230650.25803-1-colin.king@canonical.com Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-24scsi: qedi: Fix error return code of qedi_alloc_global_queues()Jia-Ju Bai
When kzalloc() returns NULL to qedi->global_queues[i], no error return code of qedi_alloc_global_queues() is assigned. To fix this bug, status is assigned with -ENOMEM in this case. Link: https://lore.kernel.org/r/20210308033024.27147-1-baijiaju1990@gmail.com Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-05scsi: qedi: Correct max length of CHAP secretNilesh Javali
The CHAP secret displayed garbage characters causing iSCSI login authentication failure. Correct the CHAP password max length. Link: https://lore.kernel.org/r/20201217105144.8055-1-njavali@marvell.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-12-07scsi: qedi: Fix missing destroy_workqueue() on error in __qedi_probeQinglang Miao
Add the missing destroy_workqueue() before return from __qedi_probe in the error handling case when fails to create workqueue qedi->offload_thread. Link: https://lore.kernel.org/r/20201109091518.55941-1-miaoqinglang@huawei.com Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.") Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit (git 2.34.1) at 2024-05-13 22:58:00 +0000