| Age | Commit message (Collapse) | Author |
|---|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits)
scsi: target: core: Constify struct target_opcode_descriptor
scsi: target: core: Constify enabled() in struct target_opcode_descriptor
scsi: hisi_sas: Fix warning detected by sparse
scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer
scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table()
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller
scsi: mvsas: Fix typos in SAS/SATA VSP register comments
scsi: fnic: Replace memset() with eth_zero_addr()
scsi: ufs: core: Support updating device command timeout
scsi: ufs: core: Change hwq_id type and value
scsi: ufs: core: Increase the UIC command timeout further
scsi: zfcp: Simplify workqueue allocation
scsi: ufs: core: Print error value as hex format in ufshcd_err_handler()
scsi: sd: Remove the stream_status member from scsi_stream_status_header
scsi: docs: Clean up some style in scsi_mid_low_api
scsi: core: Remove unused scsi_dev_info_list_del_keyed()
scsi: isci: Remove unused sci_remote_device_reset()
scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH
scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream()
...
|
|
All the callers of inet_addr_is_any() have a sockaddr_storage-backed
sockaddr. Avoid casts and switch prototype to the actual object being
used.
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20250521204619.2301870-1-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instances of 'struct target_opcode_descriptor' are not modified in this
driver.
Constifying this structure moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
53602 19750 0 73352 11e88 drivers/target/target_core_spc.o
After:
=====
text data bss dec hex filename
58594 14758 0 73352 11e88 drivers/target/target_core_spc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/889ee46e75db33e8ab997a627a1d3d651ad648db.1747592774.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Constify the first argument of the enabled() function in struct
target_opcode_descriptor.
This is the first step in order to constify struct
target_opcode_descriptor.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4290cf1dbe100c1b1edf2ede5e5aef19b04ee7f2.1747592774.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Mike Christie <michael.christie@oracle.com> says:
The following patches made over Linus's tree remove the atomic use from
the main IO path. There was a handful of atomic_longs used just used
for stats and a couple atomics used for handling ordered commands. These
patches move the stats to per cpu, and moves the ordered tracking to a
per cpu counter.
With the patches 8K IOPS increases by up to 33% when running fio
with numjobs >= 4 and using the vhost-scsi target with virtio-scsi
and virtio num_queues >= 4 (jobs and queues match, and virtqueue_size
and cmd_per_lun are increased to match the total iodepth of all
jobs).
Link: https://lore.kernel.org/r/20250424032741.16216-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The atomic use from the delayed/ordered tracking is causing perf issues
when using higher perf backend devices and multiple queues. This moves
the values to a per CPU counter. Combined with the per CPU stats patch,
this improves IOPS by up to 33% for 8K IOS when using 4 or more queues
from the initiator.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20250424032741.16216-3-michael.christie@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The atomic use in the main I/O path is causing perf issues when using
higher performance backend devices and multiple queues. This moves the
stats to per CPU. Combined with the next patch that moves the
non_ordered/delayed_cmd_count to per CPU, IOPS by up to 33% for 8K IOS
when using 4 or more queues.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20250424032741.16216-2-michael.christie@oracle.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in fixes from 6.15 and resolve a few conflicts so we can have a
clean base for UFS patches.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
NOPIN response timer may expire on a deleted connection and crash with
such logs:
Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d
BUG: Kernel NULL pointer dereference on read at 0x00000000
NIP strlcpy+0x8/0xb0
LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod]
Call Trace:
iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod]
call_timer_fn+0x58/0x1f0
run_timer_softirq+0x740/0x860
__do_softirq+0x16c/0x420
irq_exit+0x188/0x1c0
timer_interrupt+0x184/0x410
That is because nopin response timer may be re-started on nopin timer
expiration.
Stop nopin timer before stopping the nopin response timer to be sure
that no one of them will be re-started.
Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Link: https://lore.kernel.org/r/20241224101757.32300-1-d.bogdanov@yadro.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The size parameter of strscpy() is optional because strscpy() uses
sizeof() to determine the length of the destination buffer if it is not
provided as an argument. Remove it to simplify the code.
Remove some unnecessary curly braces.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250304181400.78325-1-thorsten.blum@linux.dev
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
|
|
When the tcm_loop_nr_hw_queues is set to a value greater than 1, the
tags of requests in the block layer are no longer unique. This may lead
to erroneous aborting of commands with the same tag. The issue can be
resolved by using blk_mq_unique_tag to generate globally unique
identifiers by combining the hardware queue index and per-queue tags.
Fixes: 6375f8908255 ("tcm_loop: Fixup tag handling")
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250313014728.105849-1-kanie@linux.alibaba.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
strncpy() is deprecated for NUL-terminated destination buffers; use
strscpy() instead. The destination buffer db_root is only used with "%s"
format strings and must therefore be NUL-terminated, but not NUL-padded.
Use scnprintf() because snprintf() could return a value >= DB_ROOT_LEN
and lead to an out-of-bounds access. This doesn't happen because count
is explicitly checked against DB_ROOT_LEN before. However, scnprintf()
always returns the number of characters actually written to the string
buffer, which is always within the bounds of db_root_stage, and should
be preferred over snprintf().
The size parameter of strscpy() is optional and since DB_ROOT_LEN is the
size of the destination buffer, it can be removed. Remove it to simplify
the code.
Compile-tested only.
Link: https://github.com/KSPP/linux/issues/90
Link: https://github.com/KSPP/linux/issues/105
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://lore.kernel.org/r/20250302225641.245127-2-thorsten.blum@linux.dev
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Many of the fields in struct bio_integrity_payload are only needed for
the default integrity buffer in the block layer, and the variable
sized array at the end of the structure makes it very hard to embed
into caller allocated structures.
Reduce struct bio_integrity_payload to the minimal structure needed in
common code and create two separate containing structures for the
automatically generated payload and the caller allocated payload.
The latter is a simple wrapper for struct bio_integrity_payload and
the bvecs, while the former contains the additional fields moved out
of struct bio_integrity_payload.
Always use a dedicated mempool for automatic integrity metadata
instead of depending on bio_set that is submitter controlled and thus
often doesn't have the mempool initialized and stop using mempools for
the submitter buffers as they aren't in the NOIO I/O submission path
where we need to guarantee forward progress.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Link: https://lore.kernel.org/r/20250225154449.422989-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Shawn Lin <shawn.lin@rock-chips.com> says:
This patchset adds initial UFS controller supprt for RK3576 SoC.
Patch 1 is the dt-bindings. Patch 2-4 deal with rpm and spm support
in advanced suggested by Ulf. Patch 5 exports two new APIs for host
driver. Patch 6 and 7 are the host driver and dtsi support.
Link: https://lore.kernel.org/r/1738736156-119203-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The names RESERVE and RELEASE are not only used in <scsi/scsi_proto.h> but
also elsewhere in the kernel:
$ git grep -nHE 'define[[:blank:]]*(RESERVE|RELEASE)[[:blank:]]'
drivers/input/joystick/walkera0701.c:13:#define RESERVE 20000
drivers/s390/char/tape_std.h:56:#define RELEASE 0xD4 /* 3420 NOP, 3480 REJECT */
drivers/s390/char/tape_std.h:58:#define RESERVE 0xF4 /* 3420 NOP, 3480 REJECT */
Additionally, while the names of the symbolic constants RESERVE_10 and
RELEASE_10 include the command length, the command length is not included
in the RESERVE and RELEASE names. Address both issues by renaming the
RESERVE and RELEASE constants into RESERVE_6 and RELEASE_6 respectively.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250210205031.2970833-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are some typos in comments/messages:
- Nin -> Min
- occuring -> occurring
Fix them via codespell.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Link: https://lore.kernel.org/r/20250206084905.11327-1-algonell@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Stop traversing after finding the appropriate descriptor.
Signed-off-by: Chaohai Chen <wdhh66@163.com>
Link: https://lore.kernel.org/r/20250124085542.109088-1-wdhh66@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The SPC document states that "The COMMAND DATA LENGTH field indicates the
length in bytes of the command descriptor list".
The length should be subtracted by 4 to represent the length of the
description list, not 3.
Signed-off-by: Chaohai Chen <wdhh66@163.com>
Link: https://lore.kernel.org/r/20250115070739.216154-1-wdhh66@163.com
Reviewed-by: Dmitry Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull outstanding fixes bound for this release into 6.14/scsi-fixes.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, fnic, qla2xx, mpi3mr).
The major core change is the renaming of the slave_ methods plus a bit
of constification. The rest are minor updates and fixes"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (103 commits)
scsi: fnic: Propagate SCSI error code from fnic_scsi_drv_init()
scsi: fnic: Test for memory allocation failure and return error code
scsi: fnic: Return appropriate error code from failure of scsi drv init
scsi: fnic: Return appropriate error code for mem alloc failure
scsi: fnic: Remove always-true IS_FNIC_FCP_INITIATOR macro
scsi: fnic: Fix use of uninitialized value in debug message
scsi: fnic: Delete incorrect debugfs error handling
scsi: fnic: Remove unnecessary else to fix warning in FDLS FIP
scsi: fnic: Remove extern definition from .c files
scsi: fnic: Remove unnecessary else and unnecessary break in FDLS
scsi: mpi3mr: Fix possible crash when setting up bsg fails
scsi: ufs: bsg: Set bsg_queue to NULL after removal
scsi: ufs: bsg: Delete bsg_dev when setting up bsg fails
scsi: st: Don't set pos_unknown just after device recognition
scsi: aic7xxx: Fix build 'aicasm' warning
scsi: Revert "scsi: ufs: core: Probe for EXT_IID support"
scsi: storvsc: Ratelimit warning logs to prevent VM denial of service
scsi: scsi_debug: Constify sdebug_driver_template
scsi: documentation: Corrections for struct updates
scsi: driver-api: documentation: Change what is added to docbook
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be
directly accessible via the library API, instead of requiring the
crypto API. This is much simpler and more efficient.
- Convert some users such as ext4 to use the CRC32 library API instead
of the crypto API. More conversions like this will come later.
- Add a KUnit test that tests and benchmarks multiple CRC variants.
Remove older, less-comprehensive tests that are made redundant by
this.
- Add an entry to MAINTAINERS for the kernel's CRC library code. I'm
volunteering to maintain it. I have additional cleanups and
optimizations planned for future cycles.
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits)
MAINTAINERS: add entry for CRC library
powerpc/crc: delete obsolete crc-vpmsum_test.c
lib/crc32test: delete obsolete crc32test.c
lib/crc16_kunit: delete obsolete crc16_kunit.c
lib/crc_kunit.c: add KUnit test suite for CRC library functions
powerpc/crc-t10dif: expose CRC-T10DIF function through lib
arm64/crc-t10dif: expose CRC-T10DIF function through lib
arm/crc-t10dif: expose CRC-T10DIF function through lib
x86/crc-t10dif: expose CRC-T10DIF function through lib
crypto: crct10dif - expose arch-optimized lib function
lib/crc-t10dif: add support for arch overrides
lib/crc-t10dif: stop wrapping the crypto API
scsi: target: iscsi: switch to using the crc32c library
f2fs: switch to using the crc32 library
jbd2: switch to using the crc32c library
ext4: switch to using the crc32c library
lib/crc32: make crc32c() go directly to lib
bcachefs: Explicitly select CRYPTO from BCACHEFS_FS
x86/crc32: expose CRC32 functions through lib
x86/crc32: update prototype for crc32_pclmul_le_16()
...
|
|
To ensure the output is not tangled with the shell prompt, add a line break
to clearly display the status.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250114025041.97301-1-kanie@linux.alibaba.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in fixes branch to resolve merge conflict in ufs-qcom.c.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Lift bio_split_rw_at into blk_rq_append_bio so that it validates the
hardware limits. With this all passthrough callers can simply add
bio_add_page to build the bio and delay checking for exceeding of limits
to this point instead of doing it for each page.
While this looks like adding a new expensive loop over all bio_vecs,
blk_rq_append_bio is already doing that just to counter the number of
segments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20250103073417.459715-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The functions:
iscsit_check_unsolicited_dataout()
iscsit_fail_session()
iscsit_create_conn_recovery_datain_values()
iscsit_create_conn_recovery_dataout_values()
iscsit_tpg_dump_params()
iscsit_print_session_params()
were all added in 2011 by commit e48354ce078c ("iscsi-target: Add iSCSI
fabric support for target v4.1") but have remained unused.
Remove them.
Having deleted them, the functions:
iscsi_print_params()
iscsi_dump_conn_ops()
iscsi_dump_sess_ops()
are also unused.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20241222213524.270735-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in outstanding changes from 6.13/scsi-queue.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Now that the crc32c() library function directly takes advantage of
architecture-specific optimizations, it is unnecessary to go through the
crypto API. Just use crc32c(). This is much simpler, and it improves
performance due to eliminating the crypto API overhead.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20241202010844.144356-20-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Move the x86 CRC32 assembly code into the lib directory and wire it up
to the library interface. This allows it to be used without going
through the crypto API. It remains usable via the crypto API too via
the shash algorithms that use the library interface. Thus all the
arch-specific "shash" code becomes unnecessary and is removed.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20241202010844.144356-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, hisi_sas, st).
Amazingly enough, no core changes with the biggest set of driver
changes being ufs (which conflicted with it's own fixes a bit, hence
the merges) and the rest being minor fixes and updates"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (97 commits)
scsi: st: New session only when Unit Attention for new tape
scsi: st: Add MTIOCGET and MTLOAD to ioctls allowed after device reset
scsi: st: Don't modify unknown block number in MTIOCGET
scsi: ufs: core: Restore SM8650 support
scsi: sun3: Mark driver struct with __refdata to prevent section mismatch
scsi: sg: Enable runtime power management
scsi: qedi: Fix a possible memory leak in qedi_alloc_and_init_sb()
scsi: qedf: Fix a possible memory leak in qedf_alloc_and_init_sb()
scsi: fusion: Remove unused variable 'rc'
scsi: bfa: Fix use-after-free in bfad_im_module_exit()
scsi: esas2r: Remove unused esas2r_build_cli_req()
scsi: target: Fix incorrect function name in pscsi_create_type_disk()
scsi: ufs: Replace deprecated PCI functions
scsi: Switch back to struct platform_driver::remove()
scsi: pm8001: Increase request sg length to support 4MiB requests
scsi: pm8001: Initialize devices in pm8001_alloc_dev()
scsi: pm8001: Use module param to set pcs event log severity
scsi: ufs: ufs-mediatek: Configure individual LU queue flags
scsi: MAINTAINERS: Update UFS Exynos entry
scsi: lpfc: Copyright updates for 14.4.0.6 patches
...
|
|
'struct nla_policy' and 'struct match_table_t' are not modified in this
driver.
Constifying these structures moves some data to a read-only section, so
increase overall security, especially when the structure holds some
function pointers, which is the case of struct nla_policy.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
93188 6933 338 100459 1886b drivers/target/target_core_user.o
After:
=====
text data bss dec hex filename
93508 6581 338 100427 1884b drivers/target/target_core_user.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/f83cd8469cc17391178e1181e8c26c4c1fb6028f.1731330634.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In pr_err(), bdev_open_by_path() should be renamed to
bdev_file_open_by_path()
Fixes: 034f0cf8fdf9 ("target: port block device access to file")
Signed-off-by: Baolin Liu <liubaolin@kylinos.cn>
Link: https://lore.kernel.org/r/20241030021800.234980-1-liubaolin12138@163.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Fixes all in drivers. The largest is the mpi3mr which corrects a phy
count limit that should only apply to the controller but was being
incorrectly applied to expander phys"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: core: Fix null-ptr-deref in target_alloc_device()
scsi: mpi3mr: Validate SAS port assignments
scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down
scsi: ufs: core: Requeue aborted request
scsi: ufs: core: Fix the issue of ICU failure
|
|
There is a null-ptr-deref issue reported by KASAN:
BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod]
...
kasan_report+0xb9/0xf0
target_alloc_device+0xbc4/0xbe0 [target_core_mod]
core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod]
target_core_init_configfs+0x205/0x420 [target_core_mod]
do_one_initcall+0xdd/0x4e0
...
entry_SYSCALL_64_after_hwframe+0x76/0x7e
In target_alloc_device(), if allocing memory for dev queues fails, then
dev will be freed by dev->transport->free_device(), but dev->transport
is not initialized at that time, which will lead to a null pointer
reference problem.
Fixing this bug by freeing dev with hba->backend->ops->free_device().
Fixes: 1526d9f10c61 ("scsi: target: Make state_list per CPU")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20241011113444.40749-1-wanghai38@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
While running net selftests with CONFIG_PROVE_RCU_LIST=y I saw
one lockdep splat [1].
genlmsg_mcast() uses for_each_net_rcu(), and must therefore hold RCU.
Instead of letting all callers guard genlmsg_multicast_allns()
with a rcu_read_lock()/rcu_read_unlock() pair, do it in genlmsg_mcast().
This also means the @flags parameter is useless, we need to always use
GFP_ATOMIC.
[1]
[10882.424136] =============================
[10882.424166] WARNING: suspicious RCU usage
[10882.424309] 6.12.0-rc2-virtme #1156 Not tainted
[10882.424400] -----------------------------
[10882.424423] net/netlink/genetlink.c:1940 RCU-list traversed in non-reader section!!
[10882.424469]
other info that might help us debug this:
[10882.424500]
rcu_scheduler_active = 2, debug_locks = 1
[10882.424744] 2 locks held by ip/15677:
[10882.424791] #0: ffffffffb6b491b0 (cb_lock){++++}-{3:3}, at: genl_rcv (net/netlink/genetlink.c:1219)
[10882.426334] #1: ffffffffb6b49248 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg (net/netlink/genetlink.c:61 net/netlink/genetlink.c:57 net/netlink/genetlink.c:1209)
[10882.426465]
stack backtrace:
[10882.426805] CPU: 14 UID: 0 PID: 15677 Comm: ip Not tainted 6.12.0-rc2-virtme #1156
[10882.426919] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[10882.427046] Call Trace:
[10882.427131] <TASK>
[10882.427244] dump_stack_lvl (lib/dump_stack.c:123)
[10882.427335] lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822)
[10882.427387] genlmsg_multicast_allns (net/netlink/genetlink.c:1940 (discriminator 7) net/netlink/genetlink.c:1977 (discriminator 7))
[10882.427436] l2tp_tunnel_notify.constprop.0 (net/l2tp/l2tp_netlink.c:119) l2tp_netlink
[10882.427683] l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:253) l2tp_netlink
[10882.427748] genl_family_rcv_msg_doit (net/netlink/genetlink.c:1115)
[10882.427834] genl_rcv_msg (net/netlink/genetlink.c:1195 net/netlink/genetlink.c:1210)
[10882.427877] ? __pfx_l2tp_nl_cmd_tunnel_create (net/l2tp/l2tp_netlink.c:186) l2tp_netlink
[10882.427927] ? __pfx_genl_rcv_msg (net/netlink/genetlink.c:1201)
[10882.427959] netlink_rcv_skb (net/netlink/af_netlink.c:2551)
[10882.428069] genl_rcv (net/netlink/genetlink.c:1220)
[10882.428095] netlink_unicast (net/netlink/af_netlink.c:1332 net/netlink/af_netlink.c:1357)
[10882.428140] netlink_sendmsg (net/netlink/af_netlink.c:1901)
[10882.428210] ____sys_sendmsg (net/socket.c:729 (discriminator 1) net/socket.c:744 (discriminator 1) net/socket.c:2607 (discriminator 1))
Fixes: 33f72e6f0c67 ("l2tp : multicast notification to the registered listeners")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: James Chapman <jchapman@katalix.com>
Cc: Tom Parkin <tparkin@katalix.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241011171217.3166614-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Commit 13247018d68f ("scsi: target: iscsi: Fix hang in the iSCSI login
code") removed iscsi_handle_login_thread_timeout() but left declaration.
Commit 3e1c81a95f0d ("iscsi-target: Refactor RX PDU logic + export request
PDU handling") left iscsi_target_get_initial_payload() declaration.
Commit d703ce2f7f4d ("iscsi/iser-target: Convert to command priv_size
usage") remove iscsit_alloc_cmd() but left declaration.
And finally, a few other declarations were never implenmented since
introduction in commit e48354ce078c ("iscsi-target: Add iSCSI fabric
support for target v4.1").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20240810093437.2586476-1-yuehaibing@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Block layer integrity configuration is a bit complex right now, as it
indirects through operation vectors for a simple two-dimensional
configuration:
a) the checksum type of none, ip checksum, crc, crc64
b) the presence or absence of a reference tag
Remove the integrity profile, and instead add a separate csum_type flag
which replaces the existing ip-checksum field and a new flag that
indicates the presence of the reference tag.
This removes up to two layers of indirect calls, remove the need to
offload the no-op verification of non-PI metadata to a workqueue and
generally simplifies the code. The downside is that block/t10-pi.c now
has to be built into the kernel when CONFIG_BLK_DEV_INTEGRITY is
supported. Given that both nvme and SCSI require t10-pi.ko, it is loaded
for all usual configurations that enabled CONFIG_BLK_DEV_INTEGRITY
already, though.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240613084839.1044015-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull misc vfs updates from Al Viro:
"Assorted commits that had missed the last merge window..."
* tag 'pull-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
remove call_{read,write}_iter() functions
do_dentry_open(): kill inode argument
kernel_file_open(): get rid of inode argument
get_file_rcu(): no need to check for NULL separately
fd_is_open(): move to fs/file.c
close_on_exec(): pass files_struct instead of fdtable
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, lpfc, qla2xxx, mpi3mr, libsas).
The major update (which causes a conflict with block, see below) is
Christoph removing the queue limits and their associated block
helpers.
The remaining patches are assorted minor fixes and deprecated function
updates plus a bit of constification"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
scsi: mpi3mr: Sanitise num_phys
scsi: lpfc: Copyright updates for 14.4.0.2 patches
scsi: lpfc: Update lpfc version to 14.4.0.2
scsi: lpfc: Add support for 32 byte CDBs
scsi: lpfc: Change lpfc_hba hba_flag member into a bitmask
scsi: lpfc: Introduce rrq_list_lock to protect active_rrq_list
scsi: lpfc: Clear deferred RSCN processing flag when driver is unloading
scsi: lpfc: Update logging of protection type for T10 DIF I/O
scsi: lpfc: Change default logging level for unsolicited CT MIB commands
scsi: target: Remove unused list 'device_list'
scsi: iscsi: Remove unused list 'connlist_err'
scsi: ufs: exynos: Add support for Tensor gs101 SoC
scsi: ufs: exynos: Add some pa_dbg_ register offsets into drvdata
scsi: ufs: exynos: Allow max frequencies up to 267Mhz
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_TIMER_TICK_SELECT option
scsi: ufs: exynos: Add EXYNOS_UFS_OPT_UFSPR_SECURE option
scsi: ufs: dt-bindings: exynos: Add gs101 compatible
scsi: qla2xxx: Fix debugfs output for fw_resource_count
scsi: qedf: Ensure the copied buf is NUL terminated
scsi: bfa: Ensure the copied buf is NUL terminated
...
|
|
Commit be50f538e9a5 ("target: remove g_device_list") made 'g_device_list'
local as 'device_list' but also removed the last use of it, the code that
added the device to it.
Build tested only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240503234419.171823-1-linux@treblig.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
These have no clear purpose. This is effectively a revert of commit
bb7462b6fd64 ("vfs: use helpers for calling f_op->{read,write}_iter()").
The patch was created with the help of a coccinelle script.
Fixes: bb7462b6fd64 ("vfs: use helpers for calling f_op->{read,write}_iter()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
If the systemd-modules service loads the target module, the credentials of
that userspace process will be used to validate the access to the target db
directory. SELinux will prevent it, reporting an error like the following:
kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read }
for pid=1020 comm="systemd-modules" name="target" dev="dm-3"
ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0
tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0
Fix the error by using the kernel credentials to access the db directory
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Link: https://lore.kernel.org/r/20240215143944.847184-2-mlombard@redhat.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in the outstanding updates from the 6.9/scsi-queue branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"Only a couple of driver updates this time (lpfc and mpt3sas) plus the
usual assorted minor fixes and updates. The major core update is a set
of patches moving retries out of the drivers and into the core"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (84 commits)
scsi: core: Constify the struct device_type usage
scsi: libfc: replace deprecated strncpy() with memcpy()
scsi: lpfc: Replace deprecated strncpy() with strscpy()
scsi: bfa: Fix function pointer type mismatch for state machines
scsi: bfa: Fix function pointer type mismatch for hcb_qe->cbfn
scsi: bfa: Remove additional unnecessary struct declarations
scsi: csiostor: Avoid function pointer casts
scsi: qla1280: Remove redundant assignment to variable 'mr'
scsi: core: Make scsi_bus_type const
scsi: core: Really include kunit tests with SCSI_LIB_KUNIT_TEST
scsi: target: tcm_loop: Make tcm_loop_lld_bus const
scsi: scsi_debug: Make pseudo_lld_bus const
scsi: iscsi: Make iscsi_flashnode_bus const
scsi: fcoe: Make fcoe_bus_type const
scsi: lpfc: Copyright updates for 14.4.0.0 patches
scsi: lpfc: Update lpfc version to 14.4.0.0
scsi: lpfc: Change lpfc_vport load_flag member into a bitmask
scsi: lpfc: Change lpfc_vport fc_flag member into a bitmask
scsi: lpfc: Protect vport fc_nodes list with an explicit spin lock
scsi: lpfc: Change nlp state statistic counters into atomic_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
|
|
The variable 'xfer_len' is being initialized and incremented but it is
never actually referenced in any other way. The variable is redundant and
can be removed.
Cleans up clang scan build warning:
drivers/target/iscsi/iscsi_target_erl1.c:586:45: warning: variable
'xfer_len' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240307104553.1980860-1-colin.i.king@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Link: https://lore.kernel.org/r/20240123-vfs-bdev-file-v2-17-adbd023e19cc@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As of commit 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc
wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit()
and kfree(). That is not done properly for the error case, hitting WARN and
NULL pointer dereference in bio_free().
Fixes: 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Link: https://lore.kernel.org/r/20240214144356.101814-1-naohiro.aota@wdc.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
