summaryrefslogtreecommitdiff
path: root/drivers/thermal/tegra
AgeCommit message (Collapse)Author
2023-10-02thermal: tegra-bpmp: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-10-02thermal: soctherm: Convert to platform remove callback returning voidUwe Kleine-König
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-08-22thermal/drivers/tegra-bpmp: Check if BPMP supports trip pointsMikko Perttunen
Check if BPMP supports thermal trip points, and if not, do not expose the .set_trips callback to the thermal core framework. This can happen in virtualized environments where asynchronous communication with VM BPMP drivers is not available. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20221129153914.2699041-1-cyndis@kapsi.fi
2023-07-31thermal: Explicitly include correct DT includesRob Herring
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-06-26thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()Yangtao Li
The upper-layer devm_thermal_add_hwmon_sysfs() function can directly print error information. Signed-off-by: Yangtao Li <frank.li@vivo.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230620090732.50025-6-frank.li@vivo.com
2023-04-07thermal/drivers/tegra-bpmp: Handle offline zonesMikko Perttunen
Thermal zones located in power domains may not be accessible when the domain is powergated. In this situation, reading the temperature will return -BPMP_EFAULT. When evaluating trips, BPMP will internally use -256C as the temperature for offline zones. For smooth operation, for offline zones, return -EAGAIN when reading the temperature and allow registration of zones even if they are offline during probe. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20230330094904.2589428-1-cyndis@kapsi.fi
2023-03-03thermal/drivers/tegra: Remove unneeded lock when setting a trip pointDaniel Lezcano
The function tegra_tsensor_enable_hw_channel() takes the thermal zone lock to prevent "a potential" race with a call to set_trips() callback. The driver must not play with the thermal framework core code internals. The tegra_tsensor_enable_hw_channel() is called by: - the suspend / resume callbacks - the probe function after the thermal zones are registered The thermal zone lock taken in this function is supposed to protect from a call to the set_trips() callback which writes in the same register. The potential race is when suspend / resume are called at the same time as set_trips. This one is called only in thermal_zone_device_update(). - At suspend time, the 'in_suspend' is set, thus the thermal_zone_device_update() bails out immediately and set_trips is not called during this moment. - At resume time, the thermal zone is updated at PM_POST_SUSPEND, thus the driver has already set the TH2 temperature. - At probe time, we register the thermal zone and then we set the TH2. The only scenario I can see so far is the interrupt fires, the thermal_zone_update() is called exactly at the moment tegra_tsensor_enable_hw_channel() a few lines after registering it. Enable the channels before setting up the interrupt. We close the potential race window without using the thermal zone's lock. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/hwmon: Use the right device for devm_thermal_add_hwmon_sysfs()Daniel Lezcano
The devres variant of thermal_add_hwmon_sysfs() only takes the thermal zone structure pointer as parameter. Actually, it uses the tz->device to add it in the devres list. It is preferable to use the device registering the thermal zone instead of the thermal zone device itself. That prevents the driver accessing the thermal zone structure internals and it is from my POV more correct regarding how devm_ is used. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> #amlogic_thermal Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in thermal located driversDaniel Lezcano
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> #R-Car Acked-by: Mark Brown <broonie@kernel.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> #MediaTek auxadc and lvts Reviewed-by: Balsam CHIHI <bchihi@baylibre.com> #Mediatek lvts Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> #da9062 Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> #spread Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> #sun8i_thermal Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> #Broadcom Reviewed-by: Dhruva Gole <d-gole@ti.com> # K3 bandgap Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> #rockchip Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> #uniphier Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-02-15thermal: Remove core header inclusion from driversDaniel Lezcano
As the name states "thermal_core.h" is the header file for the core components of the thermal framework. Too many drivers are including it. Hopefully the recent cleanups helped to self encapsulate the code a bit more and prevented the drivers to need this header. Remove this inclusion in every place where it is possible. Some other drivers did a confusion with the core header and the one exported in linux/thermal.h. They include the former instead of the latter. The changes also fix this. The tegra/soctherm driver still remains as it uses an internal function which need to be replaced. The Intel HFI driver uses the netlink internal framework core and should be changed to prevent to deal with the internals. No functional changes intended. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> # armada_thermal.c Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> # uniphier_thermal.c Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> # rcar_gen3_thermal.c Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> # amlogic_thermal.c Acked-by: Florian Fainelli <f.fainelli@gmail.com> # bcm2835_thermal.c Acked-by: Thierry Reding <treding@nvidia.com> # tegra30-tsensor.c Link: https://lore.kernel.org/r/20230206153432.1017282-1-daniel.lezcano@linaro.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2023-01-06thermal/drivers/tegra: Fix set_trip_temp() deadlockJohan Hovold
The set_trip_temp() callback is used when changing the trip temperature through sysfs. As it is called with the thermal-zone-device lock held it must not use thermal_zone_get_trip() directly or it will deadlock. Fixes: 56d7b397cc29 ("thermal/drivers/tegra: Use generic thermal_zone_get_trip() function") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20221214131617.2447-4-johan+linaro@kernel.org Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
2023-01-06thermal/drivers/tegra: Fix crash when getting critical tempJon Hunter
Commit 13bea86623be ("thermal/of: Remove of_thermal_get_crit_temp()") removed the function of_thermal_get_crit_temp() and this is causing a NULL pointer deference crash when attempting to call the 'get_crit_temp' function pointer because this function pointer is no longer initialised. Fix this by replacing the call to the 'get_crit_temp' function pointer with a call to the function thermal_zone_get_crit_temp() instead. Fixes: 13bea86623be ("thermal/of: Remove of_thermal_get_crit_temp()") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20221010150311.40384-1-jonathanh@nvidia.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2023-01-06thermal/drivers/tegra: Use generic thermal_zone_get_trip() functionDaniel Lezcano
Replace a single call to thermal_zone_get_trip() to get a trip point instead of calling the different ops->get_trip* Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20221003092602.1323944-11-daniel.lezcano@linaro.org
2022-10-24firmware: tegra: bpmp: Use iosys-map helpersThierry Reding
The shared memory used for inter-processor communication between the CPU and the BPMP can reside either in system memory or in I/O memory. Use the iosys-map helpers to abstract these differences away. Signed-off-by: Thierry Reding <treding@nvidia.com>
2022-08-17thermal/drivers/tegra: Switch to new of APIDaniel Lezcano
The thermal OF code has a new API allowing to migrate the OF initialization to a simpler approach. The ops are no longer device tree specific and are the generic ones provided by the core code. Convert the ops to the thermal_zone_device_ops format and use the new API to register the thermal zone with these generic ops. Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220804224349.1926752-8-daniel.lezcano@linexp.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-28thermal/core: Rename 'trips' to 'num_trips'Daniel Lezcano
In order to use thermal trips defined in the thermal structure, rename the 'trips' field to 'num_trips' to have the 'trips' field containing the thermal trip points. Cc: Alexandre Bailon <abailon@baylibre.com> Cc: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linexp.org> Link: https://lore.kernel.org/r/20220722200007.1839356-8-daniel.lezcano@linexp.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-07-28thermal/drivers/tegra: Remove get_trend functionDaniel Lezcano
The get_trend function does already what the generic framework does. Remove it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://lore.kernel.org/r/20220616202537.303655-2-daniel.lezcano@linaro.org Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2022-03-08thermal: tegra-bpmp: Handle errors in BPMP responseMikko Perttunen
The return value from tegra_bpmp_transfer indicates the success or failure of the IPC transaction with BPMP. If the transaction succeeded, we also need to check the actual command's result code. Add code to do this. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210915085517.1669675-1-mperttunen@nvidia.com Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2021-08-14thermal/drivers/tegra-soctherm: Silence message about clamped temperatureDmitry Osipenko
The Tegra soctherm driver prints message about the clamped temperature trip each time when thermal core disables the low/high trip. The message is confusing and creates illusion that driver is malfunctioning. Turn that noisy info message into a debug message. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210712002353.17276-1-digetx@gmail.com
2021-08-14thermal/drivers/tegra: Correct compile-testing of driversDmitry Osipenko
All Tegra thermal drivers support compile-testing, but the drivers are not available for compile-testing because the whole Kconfig meny entry depends on ARCH_TEGRA, missing the alternative COMPILE_TEST dependency option. Correct the Kconfig entry. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210617072403.3487-1-digetx@gmail.com
2021-08-14thermal/drivers/tegra: Add driver for Tegra30 thermal sensorDmitry Osipenko
All NVIDIA Tegra30 SoCs have a two-channel on-chip sensor unit which monitors temperature and voltage of the SoC. Sensors control CPU frequency throttling, which is activated by hardware once preprogrammed temperature level is breached, they also send signal to Power Management controller to perform emergency shutdown on a critical overheat of the SoC die. Add driver for the Tegra30 TSENSOR module, exposing it as a thermal sensor. Tested-by: Andreas Westman Dorcsak <hedmoo@yahoo.com> # Asus TF700T Tested-by: Maxim Schwalm <maxim.schwalm@gmail.com> # Asus TF700T Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # Asus TF201T Tested-by: Ihor Didenko <tailormoon@rambler.ru> # Asus TF300T Tested-by: Ion Agorria <ion@agorria.com> # Asus TF201T Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210616190417.32214-4-digetx@gmail.com
2021-04-20thermal/drivers/tegra: Use devm_platform_ioremap_resource_bynamedingsenjie
Use the devm_platform_ioremap_resource_byname() helper instead of calling platform_get_resource_byname() and devm_ioremap_resource() separately. Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210414063943.96244-1-dingsenjie@163.com
2021-03-10thermal: Fix a typo in the file soctherm.cBhaskar Chowdhury
s/calibaration/calibration/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210305015320.7614-1-unixbhaskar@gmail.com
2020-01-27thermal: tegra: Appease the kernel-doc deityAmit Kucheria
Fix up the following warning when compiled with make W=1: linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Function parameter or member 'value' not described in 'ccroc_writel' linux.git/drivers/thermal/tegra/soctherm.c:369: warning: Excess function parameter 'v' description in 'ccroc_writel' linux.git/drivers/thermal/tegra/soctherm.c:447: warning: Function parameter or member 'dev' not described in 'enforce_temp_range' linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'sg' not described in 'tegra_soctherm_set_hwtrips' linux.git/drivers/thermal/tegra/soctherm.c:772: warning: Function parameter or member 'tz' not described in 'tegra_soctherm_set_hwtrips' linux.git/drivers/thermal/tegra/soctherm.c:944: warning: Function parameter or member 'ts' not described in 'soctherm_oc_intr_enable' linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Function parameter or member 'data' not described in 'soctherm_oc_irq_disable' linux.git/drivers/thermal/tegra/soctherm.c:1167: warning: Excess function parameter 'irq_data' description in 'soctherm_oc_irq_disable' linux.git/drivers/thermal/tegra/soctherm.c:1224: warning: Function parameter or member 'ctrlr' not described in 'soctherm_irq_domain_xlate_twocell' linux.git/drivers/thermal/tegra/soctherm.c:1686: warning: Function parameter or member 'pdev' not described in 'soctherm_init_hw_throt_cdev' linux.git/drivers/thermal/tegra/soctherm.c:1764: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_cfg' linux.git/drivers/thermal/tegra/soctherm.c:1812: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_level_select' linux.git/drivers/thermal/tegra/soctherm.c:1855: warning: Function parameter or member 'ts' not described in 'throttlectl_cpu_mn' linux.git/drivers/thermal/tegra/soctherm.c:1886: warning: Function parameter or member 'ts' not described in 'throttlectl_gpu_level_select' linux.git/drivers/thermal/tegra/soctherm.c:1928: warning: Function parameter or member 'ts' not described in 'soctherm_throttle_program' Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/db764f71253bb2ad569b0aeab4c91207a39317ce.1574242756.git.amit.kucheria@linaro.org
2019-08-28thermal: tegra: Fix a typoChristophe JAILLET
s/sochterm/soctherm/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-06-18thermal: tegra: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Wei Ni <wni@nvidia.com> Cc: Yangtao Li <tiny.windzz@gmail.com> Cc: linux-pm@vger.kernel.org Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282Thomas Gleixner
Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-23thermal: tegra: Make tegra210_tsensor_thermtrips staticYueHaibing
Fix sparse warning: drivers/thermal/tegra/tegra210-soctherm.c:211:33: warning: symbol 'tegra210_tsensor_thermtrips' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-13drivers: thermal: Kconfig: pedantic cleanupsEnrico Weigelt, metux IT consult
Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: enable OC hw throttleWei Ni
Parse Over Current settings from DT and program them to generate interrupts. Also enable hw throttling whenever there are OC events. Log the OC events as debug messages. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for EDP IRQWei Ni
Add support to generate OC (over-current) interrupts to indicate the OC event and print out alarm messages. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add set_trips functionalityWei Ni
Implement set_trips ops to set passive trip points. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for thermal IRQWei Ni
Support to generate an interrupt when the temperature crosses a programmed threshold and notify the thermal framework. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: add support for gpu hw-throttleWei Ni
Add support to trigger pulse skippers on the GPU when a HOT trip point is triggered. The pulse skippers can be signalled to throttle at low, medium and high depths\levels. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-05-13thermal: tegra: support hw and sw shutdownWei Ni
Currently the critical trip points in thermal framework are the only way to specify a temperature at which HW should shutdown. This is insufficient for certain platforms which would want an orderly software shutdown in addition to HW shutdown. This change support to parse "nvidia, thermtrips" property, it allows soctherm DT to specify thermtrip temperatures so that critical trip points framework can be used for doing software shutdown. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: add get_trend opsWei Ni
Add support for get_trend ops that allows soctherm sensors to be used with the step-wise governor. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: fix memory allocationWei Ni
Fix memory allocation to store the pointers to thermal_zone_device. Signed-off-by: Wei Ni <wni@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-02-20thermal: tegra: remove unnecessary warningsWei Ni
Convert warnings to info as not all platforms may have all the thresholds and sensors enabled. Signed-off-by: Wei Ni <wni@nvidia.com> Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2019-01-02thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li
Use macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-01thermal: tegra: soctherm: add const to struct thermal_cooling_device_opssrplinux2008
Correct the typecast with const to struct thermal_cooling_device_ops. It is the last argument to the function thermal_of_cooling_device_register and this argument is of type const. So, declare this structure thermal_cooling_device_ops as constant. Signed-off-by: sumeet p <srplinux2008@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-05-06thermal: tegra: Nuke clk_{readl,writel} helpersEzequiel Garcia
Naming driver-specific register accessors with generic names, such as clk_writel and clk_readl, is bad. Moreover, clk_writel and clk_readl are part of the common clock framework api, so readers and code grep'ers get confused by this collision. The helpers are used once, so just remove them. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2018-01-01thermal: tegra: remove forward declarationsNicolin Chen
This patch just simply moves tegra_thermctl_set_trip_temp() behind those function implementations so that it can remove those forward declarations. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2017-11-17Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: - introduce brcmstb AVS TMON thermal driver (Brian Norris) - add Rockchip RV1108 support in rockchip thermal driver (Rocky Hao) - major rework on HISI driver plus additional support of hisi3660 (Daniel Lezcano) - add nvmem-cells binding on imx6sx (Leonard Crestez) - fix a NULL pointer dereference on ti thermal driver unloading (Tony Lindgren) - improve tmon tool to make it easier to cross-compile tmon (Markus Mayer) - add Coffee Lake and Cannon Lake support for intel processor and pch thermal drivers (Srinivas Pandruvada) - other small fixes and cleanups (Arvind Yadav, Colin Ian King, Allen Wild, Nicolin Chen, Baruch SiachNiklas Söderlund, Arnd Bergmann) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (44 commits) thermal: pch: Add Cannon Lake support thermal: int340x: processor_thermal: Add Coffee Lake support thermal: int340x: processor_thermal: Add Cannon Lake support thermal: bxt: remove redundant variable trip thermal: cpu_cooling: pr_err() strings should end with newlines thermal: add brcmstb AVS TMON driver Documentation: devicetree: add binding for Broadcom STB AVS TMON thermal/drivers/hisi: Add support for hi3660 SoC thermal/drivers/hisi: Prepare to add support for other hisi platforms thermal/drivers/hisi: Add platform prefix to function name thermal/drivers/hisi: Put platform code together thermal/drivers/qcom-spmi: Use devm_iio_channel_get thermal/drivers/generic-iio-adc: Switch tz request to devm version thermal/drivers/step_wise: Fix temperature regulation misbehavior thermal/drivers/hisi: Use round up step value thermal/drivers/hisi: Move the clk setup in the corresponding functions thermal/drivers/hisi: Remove mutex_lock in the code thermal/drivers/hisi: Remove thermal data back pointer thermal/drivers/hisi: Convert long to int thermal/drivers/hisi: Rename and remove unused field ...
2017-11-16Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "This branch contains platform-related driver updates for ARM and ARM64, these are the areas that bring the changes: New drivers: - driver support for Renesas R-Car V3M (R8A77970) - power management support for Amlogic GX - a new driver for the Tegra BPMP thermal sensor - a new bus driver for Technologic Systems NBUS Changes for subsystems that prefer to merge through arm-soc: - the usual updates for reset controller drivers from Philipp Zabel, with five added drivers for SoCs in the arc, meson, socfpa, uniphier and mediatek families - updates to the ARM SCPI and PSCI frameworks, from Sudeep Holla, Heiner Kallweit and Lorenzo Pieralisi Changes specific to some ARM-based SoC - the Freescale/NXP DPAA QBMan drivers from PowerPC can now work on ARM as well - several changes for power management on Broadcom SoCs - various improvements on Qualcomm, Broadcom, Amlogic, Atmel, Mediatek - minor Cleanups for Samsung, TI OMAP SoCs" [ NOTE! This doesn't work without the previous ARM SoC device-tree pull, because the R8A77970 driver is missing a header file that came from that pull. The fact that this got merged afterwards only fixes it at this point, and bisection of that driver will fail if/when you walk into the history of that driver. - Linus ] * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (96 commits) soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader bus: add driver for the Technologic Systems NBUS memory: omap-gpmc: Remove deprecated gpmc_update_nand_reg() soc: qcom: remove unused label soc: amlogic: gx pm domain: add PM and OF dependencies drivers/firmware: psci_checker: Add missing destroy_timer_on_stack() dt-bindings: power: add amlogic meson power domain bindings soc: amlogic: add Meson GX VPU Domains driver soc: qcom: Remote filesystem memory driver dt-binding: soc: qcom: Add binding for rmtfs memory of: reserved_mem: Accessor for acquiring reserved_mem of/platform: Generalize /reserved-memory handling soc: mediatek: pwrap: fix fatal compiler error soc: mediatek: pwrap: fix compiler errors arm64: mediatek: cleanup message for platform selection soc: Allow test-building of MediaTek drivers soc: mediatek: place Kconfig for all SoC drivers under menu soc: mediatek: pwrap: add support for MT7622 SoC soc: mediatek: pwrap: add common way for setup CS timing extenstion soc: mediatek: pwrap: add MediaTek MT6380 as one slave of pwrap ..
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-31thermal: tegra: remove null check for dev pointerNicolin Chen
The dev pointer is going through a null check after a dereference. So this patch removes that useless check since the driver does not pass a null dev pointer in any case. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
generated by cgit (git 2.34.1) at 2024-06-13 13:53:54 +0000