| Age | Commit message (Collapse) | Author |
|---|
|
Increase the maximum server-side RPC payload to 4MB. The default
remains at 1MB.
An API to adjust the operational maximum was added in 2006 by commit
596bbe53eb3a ("[PATCH] knfsd: Allow max size of NFSd payload to be
configured"). To adjust the operational maximum using this API, shut
down the NFS server. Then echo a new value into:
/proc/fs/nfsd/max_block_size
And restart the NFS server.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
It is no longer used.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Allow allocation of more entries in the sc_pages[] array when the
maximum size of an RPC message is increased.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Allow allocation of more entries in the rc_pages[] array when the
maximum size of an RPC message is increased.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, make sk_pages a flexible array.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: This array is no longer used.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_vec[] array accounts for 4144 bytes.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Clean up: This API is no longer used.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
All three call sites do the same thing.
I'm struggling with this a bit, however. struct xdr_buf is an XDR
layer object and unmarshaling a WRITE payload is clearly a task
intended to be done by the proc and xdr functions, not by VFS. This
feels vaguely like a layering violation.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, replace the fixed-size rq_bvec[] array in struct svc_rqst
with a chunk of dynamically-allocated memory.
The rq_bvec[] array contains enough bio_vecs to handle each page in
a maximum size RPC message.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_bvec[] array is 4144 bytes. This patch replaces that array
with a single 8-byte pointer field.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
As a step towards making NFSD's maximum rsize and wsize variable at
run-time, replace the fixed-size rq_vec[] array in struct svc_rqst
with a chunk of dynamically-allocated memory.
On a system with 8-byte pointers and 4KB pages, pahole reports that
the rq_pages[] array is 2080 bytes. This patch replaces that with
a single 8-byte pointer field.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
This page count is to be used to allocate various arrays of pages
and bio_vecs, replacing the fixed RPCSVC_MAXPAGES value.
The documenting comment is somewhat stale -- of course NFSv4
COMPOUND procedures may have multiple payloads.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neil@brown.name>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
I've been looking at a problem where we see increased RPC timeouts in
clients when the nfs_layout_flexfiles dataserver_timeo value is tuned
very low (6s). This is necessary to ensure quick failover to a different
mirror if a server goes down, but it causes a lot more major RPC timeouts.
Ultimately, the problem is server-side however. It's sometimes doesn't
respond to connection attempts. My theory is that the interrupt handler
runs when a connection comes in, the xprt ends up being enqueued, but it
takes a significant amount of time for the nfsd thread to pick it up.
Currently, the svc_xprt_dequeue tracepoint displays "wakeup-us". This is
the time between the wake_up() call, and the thread dequeueing the xprt.
If no thread was woken, or the thread ended up picking up a different
xprt than intended, then this value won't tell us how long the xprt was
waiting.
Add a new xpt_qtime field to struct svc_xprt and set it in
svc_xprt_enqueue(). When the dequeue tracepoint fires, also store the
time that the xprt sat on the queue in total. Display it as "qtime-us".
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Propagate the NFS_MOUNT_NETUNREACH_FATAL flag to work with the generic
NFS client. If the flag is set, the client will receive ENETDOWN and
ENETUNREACH errors from the RPC layer, and is expected to treat them as
being fatal.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Writing to this file will clone the 'main' xprt of an xprt_switch and
add it to be used as an additional connection.
--
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
v3: Replace call to xprt_iter_get_xprt() with xprt_iter_get_next()
Link: https://lore.kernel.org/r/20250207204225.594002-5-anna@kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
If rpc_signal_task() is called while a task is in an rpc_call_done()
callback function, and the latter calls rpc_restart_call(), the task can
end up looping due to the RPC_TASK_SIGNALLED flag being set without the
tk_rpc_status being set.
Removing the redundant mechanism for signalling the task fixes the
looping behaviour.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Fixes: 39494194f93b ("SUNRPC: Fix races with rpc_killall_tasks()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable using direct IO with localio
- Added localio related tracepoints
Bugfixes:
- Sunrpc fixes for working with a very large cl_tasks list
- Fix a possible buffer overflow in nfs_sysfs_link_rpc_client()
- Fixes for handling reconnections with localio
- Fix how the NFS_FSCACHE kconfig option interacts with NETFS_SUPPORT
- Fix COPY_NOTIFY xdr_buf size calculations
- pNFS/Flexfiles fix for retrying requesting a layout segment for
reads
- Sunrpc fix for retrying on EKEYEXPIRED error when the TGT is
expired
Cleanups:
- Various other nfs & nfsd localio cleanups
- Prepratory patches for async copy improvements that are under
development
- Make OFFLOAD_CANCEL, LAYOUTSTATS, and LAYOUTERR moveable to other
xprts
- Add netns inum and srcaddr to debugfs rpc_xprt info"
* tag 'nfs-for-6.14-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (28 commits)
SUNRPC: do not retry on EKEYEXPIRED when user TGT ticket expired
sunrpc: add netns inum and srcaddr to debugfs rpc_xprt info
pnfs/flexfiles: retry getting layout segment for reads
NFSv4.2: make LAYOUTSTATS and LAYOUTERROR MOVEABLE
NFSv4.2: mark OFFLOAD_CANCEL MOVEABLE
NFSv4.2: fix COPY_NOTIFY xdr buf size calculation
NFS: Rename struct nfs4_offloadcancel_data
NFS: Fix typo in OFFLOAD_CANCEL comment
NFS: CB_OFFLOAD can return NFS4ERR_DELAY
nfs: Make NFS_FSCACHE select NETFS_SUPPORT instead of depending on it
nfs: fix incorrect error handling in LOCALIO
nfs: probe for LOCALIO when v3 client reconnects to server
nfs: probe for LOCALIO when v4 client reconnects to server
nfs/localio: remove redundant code and simplify LOCALIO enablement
nfs_common: add nfs_localio trace events
nfs_common: track all open nfsd_files per LOCALIO nfs_client
nfs_common: rename nfslocalio nfs_uuid_lock to nfs_uuids_lock
nfsd: nfsd_file_acquire_local no longer returns GC'd nfsd_file
nfsd: rename nfsd_serv_ prefixed methods and variables with nfsd_net_
nfsd: update percpu_ref to manage references on nfsd_net
...
|
|
Commit ec596aaf9b48 ("SUNRPC: Remove code behind
CONFIG_RPCSEC_GSS_KRB5_SIMPLIFIED") was the last user of the routines
in gss_generic_token.c.
Remove the routines and associated header.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
xprt_iter_get_xprt() was added by
commit 80b14d5e61ca ("SUNRPC: Add a structure to track multiple
transports") but is unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add the OPEN4_SHARE_ACCESS_WANT constants from the nfs4.1 and delstid
draft into the nfs4_1.x file, and regenerate the headers and source
files. Do a mass renaming of NFS4_SHARE_WANT_* to
OPEN4_SHARE_ACCESS_WANT_* in the nfsd directory.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Rename the enum with the same name in include/linux/nfs4.h, add the
proper enum to nfs4_1.x and regenerate the headers and source files. Do
a mass rename of all NFS4_OPEN_DELEGATE_* to OPEN_DELEGATE_* in the nfsd
directory.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
In the long run, the NFS development community intends to autogenerate a
lot of the XDR handling code. Both the NFS client and server include
"include/linux/nfs4.hi". That file was hand-rolled, and some of the symbols
in it conflict with the autogenerated symbols.
Add a small nfs4_1.x to Documentation that currently just has the
necessary definitions for the delstid draft, and generate the relevant
header and source files. Make include/linux/nfs4.h include the generated
include/linux/sunrpc/xdrgen/nfs4_1.h and remove the conflicting
definitions from it and nfs_xdr.h.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Under heavy write load, we've seen the cl_tasks list grows to
millions of entries. Even though the list is extremely long,
the system still runs fine until the user wants to get the
information of all active RPC tasks by doing:
When this happens, tasks_start acquires the cl_lock to walk the
cl_tasks list, returning one entry at a time to the caller. The
cl_lock is held until all tasks on this list have been processed.
While the cl_lock is held, completed RPC tasks have to spin wait
in rpc_task_release_client for the cl_lock. If there are millions
of entries in the cl_tasks list it will take a long time before
tasks_stop is called and the cl_lock is released.
The spin wait tasks can use up all the available CPUs in the system,
preventing other jobs to run, this causes the system to temporarily
lock up.
This patch fixes this problem by delaying inserting the RPC
task on the cl_tasks list until the RPC call slot is reserved.
This limits the length of the cl_tasks to the number of call
slots available in the system.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
This is a prepare patch to add cache_check_rcu, will use it with follow
patch.
Suggested-by: NeilBrown <neilb@suse.de>
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Now that the connection limit only apply to unconfirmed connections,
there is no need to configure it. So remove all the configuration and
fix the number of unconfirmed connections as always 64 - which is
now given a name: XPT_MAX_TMP_CONN
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The heuristic for limiting the number of incoming connections to nfsd
currently uses sv_nrthreads - allowing more connections if more threads
were configured.
A future patch will allow number of threads to grow dynamically so that
there will be no need to configure sv_nrthreads. So we need a different
solution for limiting connections.
It isn't clear what problem is solved by limiting connections (as
mentioned in a code comment) but the most likely problem is a connection
storm - many connections that are not doing productive work. These will
be closed after about 6 minutes already but it might help to slow down a
storm.
This patch adds a per-connection flag XPT_PEER_VALID which indicates
that the peer has presented a filehandle for which it has some sort of
access. i.e the peer is known to be trusted in some way. We now only
count connections which have NOT been determined to be valid. There
should be relative few of these at any given time.
If the number of non-validated peer exceed a limit - currently 64 - we
close the oldest non-validated peer to avoid having too many of these
useless connections.
Note that this patch significantly changes the meaning of the various
configuration parameters for "max connections". The next patch will
remove all of these.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
svc_thread_init_status() contains an open-coded
store_release_wake_up(). It is cleaner to use that function directly
rather than needing to remember the barrier.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
The generic parts of the RPC layer need to know the widths (in
XDR_UNIT increments) of the XDR data types defined for each
protocol.
As a first step, add dictionaries to keep track of the symbolic and
actual maximum XDR width of XDR types.
This makes it straightforward to look up the width of a type by its
name. The built-in dictionaries are pre-loaded with the widths of
the built-in XDR types as defined in RFC 4506.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
A service created with svc_create_pooled() can be given a linked list of
programs and all of these will be served.
Using a linked list makes it cumbersome when there are several programs
that can be optionally selected with CONFIG settings.
After this patch is applied, API consumers must use only
svc_create_pooled() when creating an RPC service that listens for more
than one RPC program.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
Add new funtion svcauth_map_clnt_to_svc_cred_local which maps a
generic cred to a svc_cred suitable for use in nfsd.
This is needed by the localio code to map nfs client creds to nfs
server credentials.
Following from net/sunrpc/auth_unix.c:unx_marshal() it is clear that
->fsuid and ->fsgid must be used (rather than ->uid and ->gid). In
addition, these uid and gid must be translated with from_kuid_munged()
so local client uses correct uid and gid when acting as local server.
Jeff Layton noted:
This is where the magic happens. Since we're working in
kuid_t/kgid_t, we don't need to worry about further idmapping.
Suggested-by: NeilBrown <neilb@suse.de> # to approximate unx_marshal()
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Co-developed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
The RPC_TASK_* constants are defined as macros, which means that most
kernel builds will not contain their definitions in the debuginfo.
However, it's quite useful for debuggers to be able to view the task
state constant and interpret it correctly. Conversion to an enum will
ensure the constants are present in debuginfo and can be interpreted by
debuggers without needing to hard-code them and track their changes.
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
xdr_stream_encode_u32() returns XDR_UNIT on success.
xdr_stream_decode_u32() returns zero or -EMSGSIZE, but never
XDR_UNIT.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add a Python-based tool for translating XDR specifications into XDR
encoder and decoder functions written in the Linux kernel's C coding
style. The generator attempts to match the usual C coding style of
the Linux kernel's SunRPC consumers.
This approach is similar to the netlink code generator in
tools/net/ynl .
The maintainability benefits of machine-generated XDR code include:
- Stronger type checking
- Reduces the number of bugs introduced by human error
- Makes the XDR code easier to audit and analyze
- Enables rapid prototyping of new RPC-based protocols
- Hardens the layering between protocol logic and marshaling
- Makes it easier to add observability on demand
- Unit tests might be built for both the tool and (automatically)
for the generated code
In addition, converting the XDR layer to use memory-safe languages
such as Rust will be easier if much of the code can be converted
automatically.
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Synchronously wait for all disconnects to complete to ensure the
transports have divested all hardware resources before the
underlying RDMA device can safely be removed.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
If an svc thread needs to perform some initialisation that might fail,
it has no good way to handle the failure.
Before the thread can exit it must call svc_exit_thread(), but that
requires the service mutex to be held. The thread cannot simply take
the mutex as that could deadlock if there is a concurrent attempt to
shut down all threads (which is unlikely, but not impossible).
nfsd currently call svc_exit_thread() unprotected in the unlikely event
that unshare_fs_struct() fails.
We can clean this up by introducing svc_thread_init_status() by which an
svc thread can report whether initialisation has succeeded. If it has,
it continues normally into the action loop. If it has not,
svc_thread_init_status() immediately aborts the thread.
svc_start_kthread() waits for either of these to happen, and calls
svc_exit_thread() (under the mutex) if the thread aborted.
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
sp_nrthreads is only ever accessed under the service mutex
nlmsvc_mutex nfs_callback_mutex nfsd_mutex
so these is no need for it to be an atomic_t.
The fact that all code using it is single-threaded means that we can
simplify svc_pool_victim and remove the temporary elevation of
sp_nrthreads.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Various functions are only used within the sunrpc module, and several
are only use in the one file. So clean up:
These are marked static, and any EXPORT is removed.
svc_rcpb_setup()
svc_rqst_alloc()
svc_rqst_free() - also moved before first use
svc_rpcbind_set_version()
svc_drop() - also moved to svc.c
These are now not EXPORTed, but are not static.
svc_authenticate()
svc_sock_update_bufs()
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for large folios
- Implement rpcrdma generic device removal notification
- Add client support for attribute delegations
- Use a LAYOUTRETURN during reboot recovery to report layoutstats
and errors
- Improve throughput for random buffered writes
- Add NVMe support to pnfs/blocklayout
Bugfixes:
- Fix rpcrdma_reqs_reset()
- Avoid soft lockups when using UDP
- Fix an nfs/blocklayout premature PR key unregestration
- Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
- Do not extend writes to the entire folio
- Pass explicit offset and count values to tracepoints
- Fix a race to wake up sleeping SUNRPC sync tasks
- Fix gss_status tracepoint output
Cleanups:
- Add missing MODULE_DESCRIPTION() macros
- Add blocklayout / SCSI layout tracepoints
- Remove asm-generic headers from xprtrdma verbs.c
- Remove unused 'struct mnt_fhstatus'
- Other delegation related cleanups
- Other folio related cleanups
- Other pNFS related cleanups
- Other xprtrdma cleanups"
* tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
SUNRPC: Fixup gss_status tracepoint error output
SUNRPC: Fix a race to wake a sync task
nfs: split nfs_read_folio
nfs: pass explicit offset/count to trace events
nfs: do not extend writes to the entire folio
nfs/blocklayout: add support for NVMe
nfs: remove nfs_page_length
nfs: remove the unused max_deviceinfo_size field from struct pnfs_layoutdriver_type
nfs: don't reuse partially completed requests in nfs_lock_and_join_requests
nfs: move nfs_wait_on_request to write.c
nfs: fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests
nfs: fold nfs_folio_find_and_lock_request into nfs_lock_and_join_requests
nfs: simplify nfs_folio_find_and_lock_request
nfs: remove nfs_folio_private_request
nfs: remove dead code for the old swap over NFS implementation
NFSv4.1 another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
nfs: Block on write congestion
nfs: Properly initialize server->writeback
nfs: Drop pointless check from nfs_commit_release_pages()
nfs/blocklayout: SCSI layout trace points for reservation key reg/unreg
...
|
|
Allow the pool_mode setting code to be called from internal callers
so we can call it from a new netlink op. Add a new svc_pool_map_get
function to return the current setting. Change the existing module
parameter handling to use the new interfaces under the hood.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Only pooled services take a reference to the svc_pool_map. The sunrpc
code has always used the sv_nrpools value to detect whether the service
is pooled.
The problem there is that nfsd is a pooled service, but when it's
running in "global" pool_mode, it doesn't take a reference to the pool
map because it has a sv_nrpools value of 1. This means that we have
two separate codepaths for starting the server, depending on whether
it's pooled or not.
Fix this by adding a new flag to the svc_serv, that indicates whether
the serv is pooled. With this we can have the nfsd service
unconditionally take a reference, regardless of pool_mode.
Note that this is a behavior change for
/sys/module/sunrpc/parameters/pool_mode. Usually this file does not
allow you to change the pool-mode while there are nfsd threads running,
but if the pool-mode is "global" it's allowed. My assumption is that
this is a bug, since it probably should never have worked this way.
This patch changes the behavior such that you get back EBUSY even
when nfsd is running in global mode. I think this is more reasonable
behavior, and given that most people set this today using the module
parameter, it's doubtful anyone will notice.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Commit e87a911fed07 ("nvme-rdma: use ib_client API to detect device
removal") explains the benefits of handling device removal outside
of the CM event handler.
Sketch in an IB device removal notification mechanism that can be
used by both the client and server side RPC-over-RDMA transport
implementations.
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
svc_find_listener will return the transport instance pointer for the
endpoint accepting connections/peer traffic from the specified transport
class and matching sockaddr.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Add svc_xprt_create_from_sa utility routine and refactor
svc_xprt_create() codebase in order to introduce the capability to
create a svc port from socket address.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fix from Chuck Lever:
- Fix an NFS/RDMA performance regression in v6.9-rc
* tag 'nfsd-6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "svcrdma: Add Write chunk WRs to the RPC's Send WR chain"
|
|
Performance regression reported with NFS/RDMA using Omnipath,
bisected to commit e084ee673c77 ("svcrdma: Add Write chunk WRs to
the RPC's Send WR chain").
Tracing on the server reports:
nfsd-7771 [060] 1758.891809: svcrdma_sq_post_err:
cq.id=205 cid=226 sc_sq_avail=13643/851 status=-12
sq_post_err reports ENOMEM, and the rdma->sc_sq_avail (13643) is
larger than rdma->sc_sq_depth (851). The number of available Send
Queue entries is always supposed to be smaller than the Send Queue
depth. That seems like a Send Queue accounting bug in svcrdma.
As it's getting to be late in the 6.9-rc cycle, revert this commit.
It can be revisited in a subsequent kernel release.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218743
Fixes: e084ee673c77 ("svcrdma: Add Write chunk WRs to the RPC's Send WR chain")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Bugfixes:
- Fix for an Oops in the NFSv4.2 listxattr handler
- Correct an incorrect buffer size in listxattr
- Fix for an Oops in the pNFS flexfiles layout
- Fix a refcount leak in NFS O_DIRECT writes
- Fix missing locking in NFS O_DIRECT
- Avoid an infinite loop in pnfs_update_layout
- Fix an overflow in the RPC waitqueue queue length counter
- Ensure that pNFS I/O is also protected by TLS when xprtsec is
specified by the mount options
- Fix a leaked folio lock in the netfs read code
- Fix a potential deadlock in fscache
- Allow setting the fscache uniquifier in NFSv4
- Fix an off by one in root_nfs_cat()
- Fix another off by one in rpc_sockaddr2uaddr()
- nfs4_do_open() can incorrectly trigger state recovery
- Various fixes for connection shutdown
Features and cleanups:
- Ensure that containers only see their own RPC and NFS stats
- Enable nconnect for RDMA
- Remove dead code from nfs_writepage_locked()
- Various tracepoint additions to track EXCHANGE_ID, GETDEVICEINFO,
and mount options"
* tag 'nfs-for-6.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (29 commits)
nfs: fix panic when nfs4_ff_layout_prepare_ds() fails
NFS: trace the uniquifier of fscache
NFS: Read unlock folio on nfs_page_create_from_folio() error
NFS: remove unused variable nfs_rpcstat
nfs: fix UAF in direct writes
nfs: properly protect nfs_direct_req fields
NFS: enable nconnect for RDMA
NFSv4: nfs4_do_open() is incorrectly triggering state recovery
NFS: avoid infinite loop in pnfs_update_layout.
NFS: remove sync_mode test from nfs_writepage_locked()
NFSv4.1/pnfs: fix NFS with TLS in pnfs
NFS: Fix an off by one in root_nfs_cat()
nfs: make the rpc_stat per net namespace
nfs: expose /proc/net/sunrpc/nfs in net namespaces
sunrpc: add a struct rpc_stats arg to rpc_create_args
nfs: remove unused NFS_CALL macro
NFSv4.1: add tracepoint to trunked nfs4_exchange_id calls
NFS: Fix nfs_netfs_issue_read() xarray locking for writeback interrupt
SUNRPC: increase size of rpc_wait_queue.qlen from unsigned short to unsigned int
nfs: fix regression in handling of fsc= option in NFSv4
...
|
|
We want to be able to have our rpc stats handled in a per network
namespace manner, so add an option to rpc_create_args to specify a
different rpc_stats struct instead of using the one on the rpc_program.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Chain RDMA Writes that convey Write chunks onto the local Send
chain. This means all WRs for an RPC Reply are now posted with a
single ib_post_send() call, and there is a single Send completion
when all of these are done. That reduces both the per-transport
doorbell rate and completion rate.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Refactor to eventually enable svcrdma to post the Write WRs for each
RPC response using the same ib_post_send() as the Send WR (ie, as a
single WR chain).
svc_rdma_result_payload (originally svc_rdma_read_payload) was added
so that the upper layer XDR encoder could identify a range of bytes
to be possibly conveyed by RDMA (if a Write chunk was provided by
the client).
The purpose of commit f6ad77590a5d ("svcrdma: Post RDMA Writes while
XDR encoding replies") was to post as much of the result payload
outside of svc_rdma_sendto() as possible because svc_rdma_sendto()
used to be called with the xpt_mutex held.
However, since commit ca4faf543a33 ("SUNRPC: Move xpt_mutex into
socket xpo_sendto methods"), the xpt_mutex is no longer held when
calling svc_rdma_sendto(). Thus, that benefit is no longer an issue.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
