| Age | Commit message (Collapse) | Author |
|---|
|
Open code 'tpm_buf_append_hmac_session_opt' to the call site, as it only
masks a call sequence and does otherwise nothing particularly useful.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
Remove 'attributes' parameter from 'tpm_buf_append_auth', as it is not used
by the function.
Fixes: 27184f8905ba ("tpm: Opt-in in disable PCR integrity protection")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
|
|
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Using -EFAULT as the tpm_ret_to_err() fallback error code causes makes it
incompatible on how trusted keys transmute TPM return codes.
Change the fallback as -EPERM in order to gain compatibility with trusted
keys. In addition, map TPM_RC_HASH to -EINVAL in order to be compatible
with tpm2_seal_trusted() return values.
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_get_pcr_allocation() does not cap any upper limit for the number of
banks. Cap the limit to eight banks so that out of bounds values coming
from external I/O cause on only limited harm.
Cc: stable@vger.kernel.org # v5.10+
Fixes: bcfff8384f6c ("tpm: dynamically allocate the allocated_banks array")
Tested-by: Lai Yi <yi1.lai@linux.intel.com>
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@opinsys.com>
|
|
'trusted_tpm2' duplicates 'tpm2_hash_map' originally part of the TPN
driver, which is suboptimal.
Implement and export `tpm2_find_hash_alg()` in the driver, and substitute
the redundant code in 'trusted_tpm2' with a call to the new function.
Reviewed-by: Jonathan McDowell <noodles@meta.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The current shenanigans for duration calculation introduce too much
complexity for a trivial problem, and further the code is hard to patch and
maintain.
Address these issues with a flat look-up table, which is easy to understand
and patch. If leaf driver specific patching is required in future, it is
easy enough to make a copy of this table during driver initialization and
add the chip parameter back.
'chip->duration' is retained for TPM 1.x.
As the first entry for this new behavior address TCG spec update mentioned
in this issue:
https://github.com/raspberrypi/linux/issues/7054
Therefore, for TPM_SelfTest the duration is set to 3000 ms.
This does not categorize a as bug, given that this is introduced to the
spec after the feature was originally made.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Quite a few commits but nothing really that would be worth of spending
too much time for, or would want to emphasize in particular"
* tag 'tpmdd-next-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm_crb_ffa: handle tpm busy return code
tpm_crb_ffa: Remove memset usage
tpm_crb_ffa: Fix typos in function name
tpm: Check for completion after timeout
tpm: Use of_reserved_mem_region_to_resource() for "memory-region"
tpm: Replace scnprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show functions
tpm_crb_ffa: Remove unused export
tpm: tpm_crb_ffa: try to probe tpm_crb_ffa when it's built-in
firmware: arm_ffa: Change initcall level of ffa_init() to rootfs_initcall
tpm/tpm_svsm: support TPM_CHIP_FLAG_SYNC
tpm/tpm_ftpm_tee: support TPM_CHIP_FLAG_SYNC
tpm: support devices with synchronous send()
tpm: add bufsiz parameter in the .send callback
|
|
Some devices do not support interrupts and provide a single synchronous
operation to send the command and receive the response on the same buffer.
Currently, these types of drivers must use an internal buffer where they
temporarily store the response between .send() and .recv() calls.
Introduce a new flag (TPM_CHIP_FLAG_SYNC) to support synchronous send().
If that flag is set by the driver, tpm_try_transmit() will use the send()
callback to send the command and receive the response on the same buffer
synchronously. In that case send() return the number of bytes of the
response on success, or -errno on failure.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add a new `bufsiz` parameter to the `.send` callback in `tpm_class_ops`.
This parameter will allow drivers to differentiate between the actual
command length to send and the total buffer size. Currently `bufsiz` is
not used, but it will be used to implement devices with synchronous send()
to send the command and receive the response on the same buffer.
Also rename the previous parameter `len` to `cmd_len` in the declaration
to make it clear that it contains the length in bytes of the command
stored in the buffer. The semantics don't change and it can be used as
before by drivers. This is an optimization since the drivers could get it
from the header, but let's avoid duplicating code.
While we are here, resolve a checkpatch warning:
WARNING: Unnecessary space before function pointer arguments
#66: FILE: include/linux/tpm.h:90:
+ int (*send) (struct tpm_chip *chip, u8 *buf, size_t bufsiz,
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
FWIW, there is a reliable indication of removal - ->i_nlink going to 0 ;-)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
With some Infineon chips the timeouts in tpm_tis_send_data (both B and
C) can reach up to about 2250 ms.
Timeout C is retried since
commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on Infineon devices")
Timeout B still needs to be extended.
The problem is most commonly encountered with context related operation
such as load context/save context. These are issued directly by the
kernel, and there is no retry logic for them.
When a filesystem is set up to use the TPM for unlocking the boot fails,
and restarting the userspace service is ineffective. This is likely
because ignoring a load context/save context result puts the real TPM
state and the TPM state expected by the kernel out of sync.
Chips known to be affected:
tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
Description: SLB9672
Firmware Revision: 15.22
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
Firmware Revision: 7.83
tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
Firmware Revision: 5.63
Link: https://lore.kernel.org/linux-integrity/Z5pI07m0Muapyu9w@kitsune.suse.cz/
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
tpm2_start_auth_session() does not mask TPM RC correctly from the callers:
[ 28.766528] tpm tpm0: A TPM error (2307) occurred start auth session
Process TPM RCs inside tpm2_start_auth_session(), and map them to POSIX
error codes.
Cc: stable@vger.kernel.org # v6.10+
Fixes: 699e3efd6c64 ("tpm: Add HMAC session start and end functions")
Reported-by: Herbert Xu <herbert@gondor.apana.org.au>
Closes: https://lore.kernel.org/linux-integrity/Z_NgdRHuTKP6JK--@gondor.apana.org.au/
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Some Infineon devices have a issue where the status register will get
stuck with a quick REQUEST_USE / COMMAND_READY sequence. This is not
simply a matter of requiring a longer timeout; the work around is to
retry the command submission. Add appropriate logic to do this in the
send path.
This is fixed in later firmware revisions, but those are not always
available, and cannot generally be easily updated from outside a
firmware environment.
Testing has been performed with a simple repeated loop of doing a
TPM2_CC_GET_CAPABILITY for TPM_CAP_PROP_MANUFACTURER using the Go code
at:
https://the.earth.li/~noodles/tpm-stuff/timeout-reproducer-simple.go
It can take several hours to reproduce, and several million operations.
Signed-off-by: Jonathan McDowell <noodles@meta.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd37 ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
|
|
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_hmac_session*(). Thus, address
!chip->auth in tpm_buf_hmac_session*() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.9+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: 1085b8276bb4 ("tpm: Add the rest of the session HMAC API")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Unless tpm_chip_bootstrap() was called by the driver, !chip->auth can
cause a null derefence in tpm_buf_append_name(). Thus, address
!chip->auth in tpm_buf_append_name() and remove the fallback
implementation for !TCG_TPM2_HMAC.
Cc: stable@vger.kernel.org # v6.10+
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Closes: https://lore.kernel.org/linux-integrity/20240617193408.1234365-1-stefanb@linux.ibm.com/
Fixes: d0a25bb961e6 ("tpm: Add HMAC session name/handle append")
Tested-by: Michael Ellerman <mpe@ellerman.id.au> # ppc
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Rename and document TPM2_OA_TMPL, as originally requested in the patch
set review, but left unaddressed without any appropriate reasoning. The
new name is TPM2_OA_NULL_KEY, has a documentation and is local only to
tpm2-sessions.c.
Link: https://lore.kernel.org/linux-integrity/ddbeb8111f48a8ddb0b8fca248dff6cc9d7079b2.camel@HansenPartnership.com/
Link: https://lore.kernel.org/linux-integrity/CZCKTWU6ZCC9.2UTEQPEVICYHL@suppilovahvero/
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
With only single call site, this makes no sense (slipped out of the
radar during the review). Open code and document the action directly
to the site, to make it more readable.
Fixes: 1b6d7f9eb150 ("tpm: add session encryption protection to tpm2_get_random()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Update tpm2_load_context() to return -EINVAL on integrity failures and
use this as a signal when loading the NULL context that something
might be wrong. If the signal fails, check the name of the NULL
primary against the one stored in the chip data and if there is a
mismatch disable the TPM because it is likely to have suffered a reset
attack.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The final pieces of the HMAC API are for manipulating the session area
of the command. To add an authentication HMAC session
tpm_buf_append_hmac_session() is called where tpm2_append_auth() would
go. If a non empty password is passed in, this is correctly added to
the HMAC to prove knowledge of it without revealing it. Note that if
the session is only used to encrypt or decrypt parameters (no
authentication) then tpm_buf_append_hmac_session_opt() must be used
instead. This functions identically to tpm_buf_append_hmac_session()
when TPM_BUS_SECURITY is enabled, but differently when it isn't,
because effectively nothing is appended to the session area.
Next the parameters should be filled in for the command and finally
tpm_buf_fill_hmac_session() is called immediately prior to transmitting
the command which computes the correct HMAC and places it in the
command at the session location in the tpm buffer
Finally, after tpm_transmit_cmd() is called,
tpm_buf_check_hmac_response() is called to check that the returned
HMAC matched and collect the new state for the next use of the
session, if any.
The features of the session are controlled by the session attributes
set in tpm_buf_append_hmac_session(). If TPM2_SA_CONTINUE_SESSION is
not specified, the session will be flushed and the tpm2_auth structure
freed in tpm_buf_check_hmac_response(); otherwise the session may be
used again. Parameter encryption is specified by or'ing the flag
TPM2_SA_DECRYPT and response encryption by or'ing the flag
TPM2_SA_ENCRYPT. the various encryptions will be taken care of by
tpm_buf_fill_hmac_session() and tpm_buf_check_hmac_response()
respectively.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # crypto API parts
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add tpm2_append_name() for appending to the handle area of the TPM
command. When TPM_BUS_SECURITY is enabled and HMAC sessions are in
use this adds the standard u32 handle to the buffer but additionally
records the name of the object which must be used as part of the HMAC
computation. The name of certain object types (volatile and permanent
handles and NV indexes) is a hash of the public area of the object.
Since this hash is not known ahead of time, it must be requested from
the TPM using TPM2_ReadPublic() (which cannot be HMAC protected, but
if an interposer lies about it, the HMAC check will fail and the
problem will be detected).
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # crypto API parts
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Add session based HMAC authentication plus parameter decryption and
response encryption using AES. The basic design is to segregate all
the nasty crypto, hash and hmac code into tpm2-sessions.c and export a
usable API. The API first of all starts off by gaining a session with
tpm2_start_auth_session() which initiates a session with the TPM and
allocates an opaque tpm2_auth structure to handle the session
parameters. The design is that session use will be single threaded
from start to finish under the ops lock, so the tpm2_auth structure is
stored in struct tpm2_chip to simpify the externally visible API.
The session can be ended with tpm2_end_auth_session() which is
designed only to be used in error legs. Ordinarily the further
session API (future patches) will end or continue the session
appropriately without having to call this.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> # crypto API parts
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The session handling code uses a "salted" session, meaning a session
whose salt is encrypted to the public part of another TPM key so an
observer cannot obtain it (and thus deduce the session keys). This
patch creates and context saves in the tpm_chip area the primary key
of the NULL hierarchy for this purpose.
[jarkko@kernel.org: fixed documentation errors]
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Replace all instances of &buf.data[TPM_HEADER_SIZE] with a new
function tpm_buf_parameters() because encryption sessions change
where the return parameters are located in the buffer since if a
return session is present they're 4 bytes beyond the header with those
4 bytes giving the parameter length. If there is no return session,
then they're in the usual place immediately after the header.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Declare reader functions for the instances of struct tpm_buf. If the read
goes out of boundary, TPM_BUF_BOUNDARY_ERROR is set, and subsequent read
will do nothing.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Declare tpm_buf_init_sized() and tpm_buf_reset_sized() for creating TPM2B
formatted buffers. These buffers are also known as sized buffers in the
specifications and literature.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
TPM2B buffers, or sized buffers, have a two byte header, which contains the
length of the payload as a 16-bit big-endian number, without counting in
the space taken by the header. This differs from encoding in the TPM header
where the length includes also the bytes taken by the header.
Unbound the length of a tpm_buf from the value stored to the TPM command
header. A separate encoding and decoding step so that different buffer
types can be supported, with variant header format and length encoding.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Remove deprecated portions and document enum values.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
separate out the tpm_buf_... handling functions from static inlines in
tpm.h and move them to their own tpm-buf.c file. This is a precursor
to adding new functions for other TPM type handling because the amount
of code will grow from the current 70 lines in tpm.h to about 200
lines when the additions are done. 200 lines of inline functions is a
bit too much to keep in a header file.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Open code the last remaining call site for tpm_send().
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The helper function has no call sites. Thus, remove it.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The TPM RNG functionality is not necessary for entropy when the CPU
already supports the RDRAND instruction. The TPM RNG functionality
was previously disabled on a subset of AMD fTPM series, but reports
continue to show problems on some systems causing stutter root caused
to TPM RNG functionality.
Expand disabling TPM RNG use for all AMD fTPMs whether they have versions
that claim to have fixed or not. To accomplish this, move the detection
into part of the TPM CRB registration and add a flag indicating that
the TPM should opt-out of registration to hwrng.
Cc: stable@vger.kernel.org # 6.1.y+
Fixes: b006c439d58d ("hwrng: core - start hwrng kthread also for untrusted sources")
Fixes: f1324bbc4011 ("tpm: disable hwrng for fTPM on some AMD designs")
Reported-by: daniil.stas@posteo.net
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217719
Reported-by: bitlord0xff@gmail.com
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217212
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in
tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero
bytes. This prevents hwrng from racing during resume.
Cc: stable@vger.kernel.org
Fixes: 6e592a065d51 ("tpm: Move Linux RNG connection to hwrng")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
TPM chip bootstrapping was removed from tpm_chip_register(), and it
was relocated to tpm_tis_core. This breaks all drivers which are not
based on tpm_tis because the chip will not get properly initialized.
Take the corrective steps:
1. Rename tpm_chip_startup() as tpm_chip_bootstrap() and make it one-shot.
2. Call tpm_chip_bootstrap() in tpm_chip_register(), which reverts the
things as tehy used to be.
Cc: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Fixes: 548eb516ec0f ("tpm, tpm_tis: startup chip before testing for interrupts")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/all/ZEjqhwHWBnxcaRV5@xpf.sh.intel.com/
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Some TPM 2.0 devices have support for additional commands which are not
part of the TPM 2.0 specifications.
These commands are identified with bit 29 of the 32 bits command codes.
Contrarily to other fields of the TPMA_CC spec structure used to list
available commands, the Vendor flag also has to be present in the
command code itself (TPM_CC) when called.
Add this flag to tpm_find_cc() mask to prevent blocking vendor command
codes that can actually be supported by the underlying TPM device.
Signed-off-by: Julien Gomes <julien@arista.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
If something went wrong during the TPM firmware upgrade, like power
failure or the firmware image file get corrupted, the TPM might end
up in Upgrade or Failure mode upon the next start. The state is
persistent between the TPM power cycle/restart.
According to TPM specification:
* If the TPM is in Upgrade mode, it will answer with TPM2_RC_UPGRADE
to all commands except TPM2_FieldUpgradeData(). It may also accept
other commands if it is able to complete them using the previously
installed firmware.
* If the TPM is in Failure mode, it will allow performing TPM
initialization but will not provide any crypto operations.
Will happily respond to Field Upgrade calls.
Change the behavior of the tpm2_auto_startup(), so it detects the active
running mode of the TPM by adding the following checks. If
tpm2_do_selftest() call returns TPM2_RC_UPGRADE, the TPM is in Upgrade
mode.
If the TPM is in Failure mode, it will successfully respond to both
tpm2_do_selftest() and tpm2_startup() calls. Although, will fail to
answer to tpm2_get_cc_attrs_tbl(). Use this fact to conclude that TPM is
in Failure mode.
If detected that the TPM is in the Upgrade or Failure mode, the function
sets TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag.
The TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag is used later during driver
initialization/deinitialization to disable functionality which makes no
sense or will fail in the current TPM state. Following functionality is
affected:
* Do not register TPM as a hwrng
* Do not register sysfs entries which provide information impossible to
obtain in limited mode
* Do not register resource managed character device
Signed-off-by: axelj <axelj@axis.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```
The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0 TPM 1.2 Version Info:
Chip Version: 1.2.66.1
Spec Level: 2
Errata Revision: 3
TPM Vendor ID: ATML
TPM Version: 01010000
Manufacturer Info: 41544d4c
```
The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.
A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.
To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.
References:
[1] 9f3fc7bcddcb tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2] cf151a9a44d5 tpm: reduce tpm polling delay in tpm_tis_core
[3] 59f5a6b07f64 tpm: reduce poll sleep time in tpm_transmit()
[4] 424eaf910c32 tpm: reduce polling time to usecs for even finer
granularity
Fixes: 9f3fc7bcddcb ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The current implementation appends a migratable flag to the end of a
key, meaning the format isn't exactly interoperable because the using
party needs to know to strip this extra byte. However, all other
consumers of TPM sealed blobs expect the unseal to return exactly the
key. Since TPM2 keys have a key property flag that corresponds to
migratable, use that flag instead and make the actual key the only
sealed quantity. This is secure because the key properties are bound
to a hash in the private part, so if they're altered the key won't
load.
Backwards compatibility is implemented by detecting whether we're
loading a new format key or not and correctly setting migratable from
the last byte of old format keys.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem,
the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(),
which are used to take temporarily the ownership of the TPM chip. The
ownership is only taken inside tpm_send(), but this is not sufficient,
as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT
need to be done as a one single atom.
Take the TPM chip ownership before sending anything with
tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send
TPM commands instead of tpm_send(), reverting back to the old behaviour.
Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code")
Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Cc: Sumit Garg <sumit.garg@linaro.org>
Acked-by Sumit Garg <sumit.garg@linaro.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Create sysfs per hash groups with 24 PCR files in them one group,
named pcr-<hash>, for each agile hash of the TPM. The files are
plugged in to a PCR read function which is TPM version agnostic, so
this works also for TPM 1.2 but the hash is only sha1 in that case.
Note: the macros used to create the hashes emit spurious checkpatch
warnings. Do not try to "fix" them as checkpatch recommends, otherwise
they'll break.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The size of the buffers for storing context's and sessions can vary from
arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the
maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be
enough for most use with three handles (that is how many we allow at the
moment). Parametrize the buffer size while doing this, so that it is easier
to revisit this later on if required.
Cc: stable@vger.kernel.org
Reported-by: Stefan Berger <stefanb@linux.ibm.com>
Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
The original code, before it was moved into security/keys/trusted-keys
had a flush after the blob unseal. Without that flush, the volatile
handles increase in the TPM until it becomes unusable and the system
either has to be rebooted or the TPM volatile area manually flushed.
Fix by adding back the lost flush, which we now have to export because
of the relocation of the trusted key code may cause the consumer to be
modular.
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Move TPM2 trusted keys code to trusted keys subsystem. The reason
being it's better to consolidate all the trusted keys code to a single
location so that it can be maintained sanely.
Also, utilize existing tpm_send() exported API which wraps the internal
tpm_transmit_cmd() API.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Move tpm_buf code to common include/linux/tpm.h header so that it can
be reused via other subsystems like trusted keys etc.
Also rename trusted keys and asymmetric keys usage of TPM 1.x buffer
implementation to tpm1_buf to avoid any compilation errors.
Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Patch adds method ->update_durations to override returned
durations in case TPM chip misbehaves for TPM 1.2 drivers.
Cc: Peter Huewe <peterhuewe@gmx.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Alexey Klimov <aklimov@redhat.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> (!update_durations path)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, tpm_pcr_extend() accepts as an input only a SHA1 digest.
This patch replaces the hash parameter of tpm_pcr_extend() with an array of
tpm_digest structures, so that the caller can provide a digest for each PCR
bank currently allocated in the TPM.
tpm_pcr_extend() will not extend banks for which no digest was provided,
as it happened before this patch, but instead it requires that callers
provide the full set of digests. Since the number of digests will always be
chip->nr_allocated_banks, the count parameter has been removed.
Due to the API change, ima_pcr_extend() and pcrlock() have been modified.
Since the number of allocated banks is not known in advance, the memory for
the digests must be dynamically allocated. To avoid performance degradation
and to avoid that a PCR extend is not done due to lack of memory, the array
of tpm_digest structures is allocated by the users of the TPM driver at
initialization time.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Mimi Zohar <zohar@linux.ibm.com> (on x86 for TPM 1.2 & PTT TPM 2.0)
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
|
The tpm_chip structure contains the list of PCR banks currently allocated
in the TPM. When support for crypto agility will be added to the TPM
driver, users of the driver have to provide a digest for each allocated
bank to tpm_pcr_extend(). With this patch, they can obtain the PCR bank
algorithms directly from chip->allocated_banks.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
|
