| Age | Commit message (Collapse) | Author |
|---|
|
We use this logic in a couple of places. Refactor into a function.
No functional change expected from this patch.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All the drivers either use the control framework or provide a
vidiod_ext_ctrl. We can remove this callback.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All the drivers either use the control framework or provide a
vidioc_g_ext_ctrls callback. We can remove this callback.
Thanks for your service!
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
All the drivers either use the control framework or provide a
vidioc_query_ext_ctrl. We can remove this callback to reduce the
temptation of new drivers to implement it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Reorder the fields in these structs so that we waste less space due to
padding. pahole shows that lirc_fh is 8 bytes smaller, and rc_dev is 32
bytes smaller.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add the capability of retrieving the min and max values of a
compound control.
[Ricardo: Added static to v4l2_ctrl_type_op_(maximum|minimum) proto]
[Ricardo: Fix documentation]
Signed-off-by: Yunke Cao <yunkec@google.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-2-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fix small alignment checkpatch warning]
|
|
Add p_rect to struct v4l2_ext_control with basic support in
v4l2-ctrls.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-1-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
'struct tunertype', 'struct tuner_range' and 'struct tuner_params' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
2877 8554 0 11431 2ca7 drivers/media/tuners/tuner-types.o
After:
=====
text data bss dec hex filename
11421 48 0 11469 2ccd drivers/media/tuners/tuner-types.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
This new function determines how many blocks the EDID has.
Traditionally the number of extension blocks is read from
the EDID at offset 126, but this can be overridden by the
HDMI Forum EDID Extension Override Data Block. So check
that as well in this helper.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Memset the config argument to get_mbus_config V4L2 sub-device pad
operation to zero before calling the operation. This ensures the callers
don't need to bother with it nor the implementations need to set all
fields that may not be relevant to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add link_freq field to struct v4l2_mbus_config in order to pass the link
frequency to the receiving sub-device.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
v4l2_get_link_freq() accepts a V4L2 control handler for now, but it needs
to take struct media_pad argument in order to obtain the link frequency
using get_mbus_config() pad op. Prepare for this by allowing struct
media_pad as well.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Add keymap for the Siemens Gigaset RC20 remote (RC-5).
Signed-off-by: Michael Klein <michael@fossekall.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Having cec.h include linux/debugfs.h leads to all users of all cec
headers include and depend on debugfs.h and its dependencies for no
reason. Drop the include from cec.h, and include debugfs.h and
seq_file.h where needed.
Sort all the modified include lists while at it.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Extend the fwnode parsing to validate and fill in the CSI-2 C-PHY
line-orders order properties as defined in MIPI Discovery and
Configuration (DisCo) Specification for Imaging.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[Sakari Ailus: Use ARRAY_SIZE() instead of an integer.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The old hans.verkuil@cisco.com email address was discontinued years ago.
Replace it with the correct hansverk@cisco.com email.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Rename the pad field in __media_pipeline_start() to both better describe
what it is and avoid masking it during the loop.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
No user of the mt9p031_platform_data legacy platform data for board
files exist in the kernel anymore. Drop support from the driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
The v4l2_detect_cvt/gtf functions should check the result against the
timing capabilities: these functions calculate the timings, so if they
are out of bounds, they should be rejected.
To do this, add the struct v4l2_dv_timings_cap as argument to those
functions.
This required updates to the adv7604 and adv7842 drivers since the
prototype of these functions has now changed. The timings struct
that is passed to v4l2_detect_cvt/gtf in those two drivers is filled
with the timings detected by the hardware.
The vivid driver was also updated, but an additional check was added:
the width and height specified by VIDIOC_S_DV_TIMINGS has to match the
calculated result, otherwise something went wrong. Note that vivid
*emulates* hardware, so all the values passed to the v4l2_detect_cvt/gtf
functions came from the timings struct that was filled by userspace
and passed on to the driver via VIDIOC_S_DV_TIMINGS. So these fields
can contain random data. Both the constraints check via
struct v4l2_dv_timings_cap and the additional width/height check
ensure that the resulting timings are sane and not messed up by the
v4l2_detect_cvt/gtf calculations.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: 2576415846bc ("[media] v4l2: move dv-timings related code to v4l2-dv-timings.c")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a828133770f62293563e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-media/000000000000013050062127830a@google.com/
|
|
Document that callers of v4l2_subdev_{en,dis}able_streams() need to set
the mask to BIT_ULL(0).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Document the expected {enable,disable}_streams callback behaviour for
drivers that are stream-unaware i.e. don't specify the
V4L2_SUBDEV_CAP_STREAMS sub-device capability flag. In this specific case,
the mask argument can be ignored.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The scope of the s_stream video operation is now fully supported by
{enable,disable}_streams. Explicitly document the s_stream() op as
deprecated and update the related documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add new helpers to export received or transmitted HDMI InfoFrames to
debugfs.
This complements similar code in drm where the transmitted HDMI infoframes
are exported to debugfs.
The same names have been used as in drm, so this is consistent.
The exported infoframes can be parsed with the edid-decode utility.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This new function returns the dentry of the top-level debugfs "v4l2"
directory. If it does not exist yet, then it is created first.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Move cec_get/put_device to the media/cec.h header. This
allows CEC drivers to use this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git
Improvements to link validation in media graph.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240826141040.GC11033@pendragon.ideasonboard.com/
|
|
The v4l2_subdev_link_validate() helper function is meant to be used as a
drop-in implementation of a V4L2 subdev entity .link_validate() handler.
It supports subdev-to-subdev links only, and complains if one end of the
link is not a subdev. This forces drivers that have video output devices
connected to subdevs to implement a custom .link_validate() handler,
calling v4l2_subdev_link_validate() for the subdev-to-subdev links, and
performing manual link validation for the video-to-subdev links.
Video devices embed a media entity, and therefore also have a
.link_validate() operation. For video capture devices, the operation
should be manually implemented by drivers for validate the
subdev-to-video links. For video output devices, on the other hand, that
operation is never called, as link validation is performed in the
context of the sink entity.
As a result, we end up forcing drivers to implement a custom
.link_validate() handler for subdevs connected to video output devices,
when the video devices provide an operation that could be used for that
purpose.
To improve that situation, make v4l2_subdev_link_validate() delegate
link validation to the source's .link_validate() operation when the link
source is a video device and the link sink is a subdev. This allows
broader usage of v4l2_subdev_link_validate(), and simplifies drivers by
making video device link validation easy to implement in the video
device .link_validate(), regardless of whether the video device is an
output device or a capture device.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
|
|
Commit b97213a41140 ("media: v4l2-mc: Make v4l2_pipeline_pm_{get,put}
deprecated") marked the v4l2_pipeline_pm_get() and
v4l2_pipeline_pm_put() functions as deprecated, but forgot to address
the related v4l2_pipeline_link_notify() function similarly. Fix it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20240822214125.3161-1-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
When multiple planes use the same dma buf, each plane will have its own dma
buf attachment and mapping. It is a waste of IOVA space.
This patch adds a dbuf_duplicated boolean in vb2_plane. If a plane's dbuf
is the same as an existing plane, do not create another attachment and
mapping.
Signed-off-by: Yunke Cao <yunkec@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
If this flag is set, then the reply is expected to consist of
the CEC_MSG_VENDOR_COMMAND_WITH_ID opcode followed by the Vendor ID (as
used in bytes 1-4 of the message), followed by the struct cec_msg reply
field.
Note that this assumes that the byte after the Vendor ID is a
vendor-specific opcode.
This flag makes it easier to wait for replies to vendor commands,
using the same CEC framework support for waiting for regular replies.
Support for this flag is indicated by setting the new
CEC_CAP_REPLY_VENDOR_ID capability.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The tx_resolution field is never read. In theory you can imagine this
field being useful for detecting whether the transmitter has the
resolution for the message you are trying to send, but I am not aware of
any hardware where this could be an issue.
Just remove.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add keymap for the simple IR (RC-5) remote that comes with the
MyGica UTV3 Analog USB2.0 TV Box video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Tuner ranges were determined by USB capturing the vendor driver of a
MyGica UTV3 video capture card.
Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Replace the incorrect reference to the v4l2_subdev_enable_stream()
function with the correct v4l2_subdev_enable_streams() spelling.
Fixes: d0749adb3070 ("media: v4l2-subdev: Add subdev .(enable|disable)_streams() operations")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240619225343.15873-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Export reference quantization and huffman tables as provided in ITU-T.81 so
that they can be re-used by other JPEG drivers.
These are example tables provided in ITU-T.81 as reference tables and the
JPEG encoders are free to use either these or their own proprietary tables.
Also add necessary prefixes to be used for huffman tables in global header
file.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
It would be useful to mark instances of v4l2_subdev_state structures as
const when code needs to access them read-only. This isn't currently
possible, as the v4l2_subdev_state_get_*() accessor functions take a
non-const pointer to the state.
Use _Generic() to provide two different versions of the accessors, for
const and non-const states respectively. The former returns a const
pointer to the requested format, rectangle or interval, implementing
const-correctness. The latter returns a non-const pointer, preserving
the current behaviour for drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Drop the word "below" from the text.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The documentation of the v4l2_subdev_state_get_format() macro
incorrectly references __v4l2_subdev_state_get_format() instead of
__v4l2_subdev_state_gen_call(). Fix it, and also update the list of
similar macros to add the missing v4l2_subdev_state_get_interval().
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Now that enable/disable_streams operations are available for
single-stream subdevices too, there's no reason to use the old s_stream
operation on new drivers. Extend the documentation reflecting this.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Umang Jain<umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add a helper function which returns whether the subdevice is streaming,
i.e. if .s_stream or .enable_streams has been called successfully.
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
v4l2_subdev_enable/disable_streams_fallback() supports falling back to
.s_stream() for subdevs with a single source pad. It also tracks the
enabled streams for that one pad in the sd->enabled_streams field.
Tracking the enabled streams with sd->enabled_streams does not make
sense, as with .s_stream() there can only be a single stream per pad.
Thus, as the v4l2_subdev_enable/disable_streams_fallback() only supports
a single source pad, all we really need is a boolean which tells whether
streaming has been enabled on this pad or not.
However, as we only need a true/false state for a pad (instead of
tracking which streams have been enabled for a pad), we can easily
extend the fallback mechanism to support multiple source pads as we only
need to keep track of which pads have been enabled.
Change the sd->enabled_streams field to sd->enabled_pads, which is a
64-bit bitmask tracking the enabled source pads. With this change we can
remove the restriction that
v4l2_subdev_enable/disable_streams_fallback() only supports a single
source pad.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
call_s_stream() uses sd->enabled_streams to track whether streaming has
already been enabled. However,
v4l2_subdev_enable/disable_streams_fallback(), which was the original
user of this field, already uses it, and
v4l2_subdev_enable/disable_streams_fallback() will call call_s_stream().
This leads to a conflict as both functions set the field. Afaics, both
functions set the field to the same value, so it won't cause a runtime
bug, but it's still wrong and if we, e.g., change how
v4l2_subdev_enable/disable_streams_fallback() operates we might easily
cause bugs.
Fix this by adding a new field, 's_stream_enabled', for
call_s_stream().
Reviewed-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
ACPI_ID_LEN is defined in mod_devicetable.h, so the header should
be guaranteed to included in ipu-bridge.h instead of the source
files which include ipu-bridge.h.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
is_claiming_log_addrs documentation was missing.
fix this kernel-doc warning:
include/media/cec.h:296: warning: Function parameter or struct member 'is_claiming_log_addrs' not described in 'cec_adapter'
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Keep track if cec_claim_log_addrs() is running, and return -EBUSY
if it is when calling CEC_ADAP_S_LOG_ADDRS.
This prevents a case where cec_claim_log_addrs() could be called
while it was still in progress.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Yang, Chenyuan <cy54@illinois.edu>
Closes: https://lore.kernel.org/linux-media/PH7PR11MB57688E64ADE4FE82E658D86DA09EA@PH7PR11MB5768.namprd11.prod.outlook.com/
Fixes: ca684386e6e2 ("[media] cec: add HDMI CEC framework (api)")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The transfer timeout is 2100 ms, not 2.1 ms. Fix this in the
kerneldoc comment.
Link: https://lore.kernel.org/linux-media/17cd1a67-3966-237c-2e0d-2d3ae618f915@xs4all.nl
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a header for the PCI device table of all IPU6 devices. This will be
used by the IPU bridge as well so place the table in a header.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.
Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.
The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add two new functions, v4l2_subdev_lock_states() and
v4l2_subdev_unclock_states(), to acquire and release the state of two
sub-devices. They differ from calling v4l2_subdev_{un,}lock_state() so
that if the two states share the same lock, the lock is acquired only
once.
Also use the new functions in v4l2_subdev_link_validate().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Set the owner field of the async sub-devices by making
v4l2_async_register_subdev() a macro and obtaining THIS_MODULE that way.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Set a sub-device's owner field to the caller's module, provided as an
argument to the function. v4l2_device_register_subdev() becomes a macro
passing THIS_MODULE to the __v4l2_device_register_subdev() function.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
