| Age | Commit message (Collapse) | Author |
|---|
|
Sync with the pending 6.15 fixes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
|
|
In commit d69d80484598 ("driver core: have match() callback in struct
bus_type take a const *"), the match bus callback was changed to have
the driver be a const pointer. Unfortunately that const attribute was
thrown away when container_of() is called, which is not correct and was
not caught by the compiler due to how container_of() is implemented.
Fix this up by correctly preserving the const attribute of the driver
passed to the bus match function which requires the hdac_driver match
function to also take a const pointer for the driver structure.
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052204-hyphen-thermal-3e72@gregkh
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
SPI and I2C into the tas2781_hda lib
Calibration data getting function for SPI and I2C HDA drivers are almost
same, which read the calibration data from UEFI. To put them into
tas2781_hda lib for code cleanup is more reasonable than to still keep
them in the codec driver. For tas2781 codec driver, there're two different
sources for calibrated data, one is from bin file, generated in factory
test, requested and read in codec driver side; the other is from user
space during device bootup.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250522014347.1163-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add helper functions to add DAPM widgets, routes, ALSA controls,
and DAI drivers, these will be used to create SDCA function device
drivers.
This series should provide most of the core functionality needed to
get a device registered and have a working DAPM graph within the
device. There are some features that still need additional work, these
are marked with FIXMEs in the code. The two main things are SDCA
Clock Muxes (not used in our devices and needs some ASoC core work),
and better support for more complex SDCA volume control definitions
(our parts have fairly simple volumes, and SDCA has a large amount of
flexibility in how the volume control is specified).
The next steps in the process are to add helpers for the DAI ops
themselves, some IRQ handling, and firmware download. And finally we
should be able to actually add the SDCA class driver itself.
|
|
Use the previously parsed DisCo information from ACPI to create the DAI
drivers required to connect an SDCA Function into an ASoC soundcard.
Create DAI driver structures and populate the supported sample rates
and sample widths into them based on the Input/Output Terminal and any
attach Clock Source entities. More complex relationships with channels
etc. will be added later as constraints as part of the DAI startup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-8-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create the
ALSA controls required by an SDCA Function. This maps all User and
Application level SDCA Controls to ALSA controls. Typically controls
marked with those access levels are just volumes and mutes.
SDCA defines volume controls as an integer in 1/256ths of a dB and
then provides a mechanism to specify what values are valid (range
templates). Currently only a simple case of a single linear volume
range with a power of 2 step size is supported. This allows the code
to expose the volume control using a simple shift. This will need
expanded in the future, to support more complex ranges and probably
also some additional control types but this should be sufficient to
for a first pass.
For non-dataport terminal widgets also add a pin switch to allow
that endpoint to be turned on/off.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use the previously parsed DisCo information from ACPI to create DAPM
widgets and routes representing a SDCA Function. For the most part SDCA
maps well to the DAPM abstractions.
The primary point of interest is the SDCA Power Domain Entities
(PDEs), which actually control the power status of the device. Whilst
these PDEs are the primary widgets the other parts of the SDCA graph
are added to maintain a consistency with the hardware abstract,
and allow routing to take effect. As for the PDEs themselves the
code currently only handle PS0 and PS3 (basically on and off),
the two intermediate power states are not commonly used and don't
map well to ASoC/DAPM.
Other minor points of slightly complexity include, the Group Entities
(GEs) these set the value of several other controls, typically
Selector Units (SUs) for enabling a cetain jack configuration. Multiple
SUs being controlled by a GE are easily modelled creating a single
control and sharing it among the controlled muxes.
SDCA also has a slight habit of having fully connected paths, relying
more on activating the PDEs to enable functionality. This doesn't
map quite so perfectly to DAPM which considers the path a reason to
power the PDE. Whilst in the current specification Mixer Units are
defined as fixed-function, in DAPM we create a virtual control for
each input (which defaults to connected). This allows paths to be
connected/disconnected, providing a more ASoC style approach to
managing the power. PIN_SWITCHs will also be added for non-dataport
terminal entities in a later patch along with the other ALSA controls,
providing greater flexibility in power management.
A top level helper sdca_asoc_populate_component() is exported that
counts and allocates everything, however, the intermediate counting and
population functions are also exported. This will allow end drivers to
do allocation and add custom handling, which is probably fairly likely
for the early SDCA devices.
Clock muxes are currently not fully supported, so some future work will
also be required there.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-6-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The core currently supports pin switches for source/sink widgets, but
only at the card level. SDCA components specify the fabric at the
level of the individual components, to support this add helpers to
allow component level pin switches.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix minor typo SDAC -> SDCA.
Fixes: 42b144cb6a2d ("ASoC: SDCA: Add SDCA Control parsing")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250516131011.221310-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
|
|
Drop the I2C in one comment, for these registers are also used in SPI
driver; Move the macro definition of TASDEVICE_CMD_XXX from tas2781.h to
tas2781_fmwlib.c, because the macros are only referenced in only fwlib.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250518132451.707-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PCM OSS layer tries to clear the buffer with the silence data at
initialization (or reconfiguration) of a stream with the explicit call
of snd_pcm_format_set_silence() with runtime->dma_area. But this may
lead to a UAF because the accessed runtime->dma_area might be freed
concurrently, as it's performed outside the PCM ops.
For avoiding it, move the code into the PCM core and perform it inside
the buffer access lock, so that it won't be changed during the
operation.
Reported-by: syzbot+32d4647f551007595173@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/68164d8e.050a0220.11da1b.0019.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250516080817.20068-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Back-merge of 6.15 devel branch for further development of HD-audio
stuff.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Simon Trimmer <simont@opensource.cirrus.com>:
These two patches introduce a log message when provisioning the cs35l56
family of devices that uniquely identifies the firmware tuning.
|
|
The cs35l56 smart amplifier has some informational firmware controls
that are populated by a tuning bin file to unique values - logging these
during firmware load identifies the specific configuration being used on
that device instance.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/47762a5f1ce2b178ad863c6698296aea09b72e10.1747142267.git.simont@opensource.cirrus.com
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_soc_unregister_component_by_driver()
We have below 2 functions, but these are very similar
(A) snd_soc_unregister_component_by_driver()
(B) snd_soc_unregister_component()
(A) void snd_soc_unregister_component_by_driver(...)
{
...
(a) mutex_lock(&client_mutex);
^ (X) component = snd_soc_lookup_component_nolocked(dev, component_driver->name);
| if (!component) ^^^^^^^^^^^^^^^^^^^^^^
| goto out;
(b)
| snd_soc_del_component_unlocked(component);
v
out:
(c) mutex_unlock(&client_mutex);
}
(B) void snd_soc_unregister_component_by_driver(...)
{
(a) mutex_lock(&client_mutex);
^ while (1) {
| (X) struct snd_soc_component *component = snd_soc_lookup_component_nolocked(dev, NULL);
| ^^^^
(b) if (!component)
| break;
|
| snd_soc_del_component_unlocked(component);
v }
(c) mutex_unlock(&client_mutex);
}
Both are calling lock (a), find component and remove it (b), and
unlock (c). The big diff is whether use driver name for lookup() or
not (X).
Merge these into snd_soc_unregister_component_by_driver() (B), and
snd_soc_unregister_component_by_driver() (A) can be macro.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87h61qy2vn.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
s/devince/device/
It's used only internally, so no any behavior changes.
Fixes: 37e0e14128e0 ("ALSA: ump: Support UMP Endpoint and Function Block parsing")
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250511141147.10246-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is no snd_wavefront_xxx() implementation, and no one is using it.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87msbmpqls.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is no snd_gf1_lfo_xxx() implementation, and no one is using it.
Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6w2pqm8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We don't need these definitions. Remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldr6pqlh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no snd_soc_disconnect_sync() implementation, and no one is
using it. Let's remove it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jz6qpql7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_gus_use_dec(), snd_gus_use_inc() and snd_gf1_print_voice_registers()
last uses were removed in 2007 by
commit e5723b41abe5 ("[ALSA] Remove sequencer instrument layer")
Remove them.
While there, remove big #if 0 blocks next to the code being deleted.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250508000225.195766-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_hdac_stream_get_spbmaxfifo() was originally added in 2015
in commit ee8bc4df1b5a ("ALSA: hdac: Add support to enable SPIB for hdac
ext stream")
when it was originally called snd_hdac_ext_stream_set_spbmaxfifo,
it was renamed snd_hdac_ext_stream_get_spbmaxfifo shortly after
and was finally renamed to snd_hdac_stream_get_spbmaxfifo in 2022.
But it was never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20250505011037.340592-1-linux@treblig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
"Acoustic Tuning" debugfs node is a bridge to the acoustic tuning tool
which can tune the chips' acoustic effect.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250507094616.210-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
CS35L63 is a Mono Class-D PC Smart Amplifier, with Speaker Protection
and Audio Enhancement Algorithms.
CS35L63 uses a similar control interface to CS35L56 so support for
it can be added into the CS35L56 driver.
CS35L63 only has SoundWire and I2C control interfaces.
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
SOF will load the function topologies by default. However, user may want
to use the monolithic topology. Add a flag amd a module parameter to
allow user specify the topology or not using function topologies.
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Fix a small bug that can cause the sof_sdw machine driver to fail probe
after the first time it has probed. Also do some minor tidy up on the
handling of the platform_component of the dai links.
|
|
Merge series from "Peng Fan (OSS)" <peng.fan@oss.nxp.com>:
This patchset is separate from [1], and not merging changes in one
patch. So separate changes into three patches for each chip.
- sort headers
- Drop legacy platform support
- Convert to GPIO descriptors
of_gpio.h is deprecated, update the driver to use GPIO descriptors.
- Use devm_gpiod_get_optional to get GPIO descriptor with default
polarity GPIOD_OUT_LOW, set consumer name.
- Use gpiod_set_value_cansleep to configure output value.
I not have platforms to test, just do the patches with my best efforts,
and make build pass.
[1] https://lore.kernel.org/all/20250408-asoc-gpio-v1-0-c0db9d3fd6e9@nxp.com/
|
|
There is no in-tree user of "include/sound/cs42l52.h", so move
'struct cs42l52_platform_data ' to cs42l52.c and remove the header file.
And platform data is mostly for legacy platforms that create devices
non using device tree. So drop cs42l52.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-8-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no in-tree user of "include/sound/cs42l56.h", so move
'struct cs42l73_platform_data ' to cs42l73.c and remove the header file.
And platform data is mostly for legacy platforms that create devices
non using device tree. So drop cs42l73.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-5-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no in-tree user of "include/sound/cs42l56.h", so move
'struct cs42l56_platform_data' to cs42l56.c and remove the header file.
And platform data is mostly for platforms that create
devices non using device tree. CS42L56 is a discontinued product,
there is less possibility that new users will use legacy method
to create devices. So drop cs42l56.h to prepare using GPIOD API.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250506-csl42x-v3-2-e9496db544c4@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SOF driver will load required function topologies dynamically. However,
we prefer using the monolithic topology. Add a flag to allow user not
using the function topologies.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20250506113311.45487-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On CS35L63 the DIE_STS registers are populated by the Firmware from
OTP, so the driver can read these registers directly, rather than
obtaining them from OTP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-6-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
CS35L63 uses a similar control interface to CS35L56 so support for
it can be added into the CS35L56 driver.
New regmap configs have been added to support CS35L63.
CS35L63 only has SoundWire and I2C control interfaces.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-5-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Registers to set Mute, Volume and Posture are inside firmware,
which means they should be added to the list of registers set inside
firmware, in case they vary across Device or Revision.
These three registers are also used for controls, so additional
handling is required to be able to obtain and set the register inside
ALSA controls.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-4-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Firmware based registers may be different addresses across different
device ids and revision ids. Create a structure to store and access
these addresses.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250407151842.143393-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Philipp Stanner <phasta@kernel.org>:
A year ago we spent quite some work trying to get PCI into better shape.
Some pci_ functions can be sometimes managed with devres, which is
obviously bad. We want to provide an obvious API, where pci_ functions
are never, and pcim_ functions are always managed.
Thus, everyone enabling his device with pcim_enable_device() must be
ported to pcim_ functions. Porting all users will later enable us to
significantly simplify parts of the PCI subsystem. See here [1] for
details.
This patch series does that for sound.
Feel free to squash the commits as you see fit.
P.
[1] https://elixir.bootlin.com/linux/v6.14-rc4/source/drivers/pci/devres.c#L18
|
|
There is no point in passing num_platforms into
asoc_sdw_init_simple_dai_link(). Firstly, as a single pointer for the
component name is passed in only a single string can be passed and
secondly if it is a complex DAI with multiple platforms it would make
more sense to use asoc_sdw_init_dai_link().
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250505141409.2614010-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_jack_set_parent() was added as part of 2008's
commit e76d8ceaaff9 ("ALSA: Add jack reporting API")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-6-linux@treblig.org
|
|
snd_device_get_state() last use was removed in 2022 by
commit 7e1afce5866e ("ALSA: usb-audio: Inform the delayed registration more
properly")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-5-linux@treblig.org
|
|
snd_dmaengine_pcm_open_request_chan() last use was removed in 2022's
commit b401d1fd8053 ("ASoC: pxa: remove unused board support")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-3-linux@treblig.org
|
|
The last use of snd_pcm_rate_range_to_bits() was removed in 2016 by
commit b6b6e4d670c9 ("ASoC: topology: Fix setting of stream rates, rate_min
and rate_max")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250502235219.1000429-2-linux@treblig.org
|
|
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
We are using dummy component/dlc, but didn't have its check funciton.
This patch adds it.
|
|
We have snd_soc_xxx_is_dummy() functions, but not for dlc.
Let's add it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87cydc8vup.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.15
A moderately large batch of fixes for v6.15, many driver specific
including cleanups for the enabling of the Cirrus KUnit tests and a fix
for a nasty crash on resume on AMD systems. We also have one core fix,
for an ordering issue between DAPM and DPCM which could leave things
incorrectly unpowered.
|
|
The volume control for cs35l56 speakers has a maximum gain of +12 dB.
However, for many use cases, this can cause distorted audio, depending
various factors, such as other signal-processing elements in the chain,
for example if the audio passes through a gain control before reaching
the amp or the signal path has been tuned for a particular maximum
gain in the amp.
In the case of systems which use the soc_sdw_* driver, audio will
likely be distorted in all cases above 0 dB, therefore add a volume
limit of 400, which is 0 dB maximum volume inside this driver.
The volume limit should be applied to both soundwire and soundwire
bridge configurations.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20250430103134.24579-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
SND_SOC_TAS2781_FMWLIB
Most codes in tas2781_spi_fwlib.c are same as tas2781-fmwlib.c, mainly for
firmware parsing, only differece is the register reading, bit update and
book switching in i2c and spi. The main purpose of this patch is for code
cleaup and arrange the shared part for i2c and spi.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250429111055.567-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The conversion function from MIDI 1.0 to UMP packet contains an
internal buffer to keep the incoming MIDI bytes, and its size is 4, as
it was supposed to be the max size for a MIDI1 UMP packet data.
However, the implementation overlooked that SysEx is handled in a
different format, and it can be up to 6 bytes, as found in
do_convert_to_ump(). It leads eventually to a buffer overflow, and
may corrupt the memory when a longer SysEx message is received.
The fix is simply to extend the buffer size to 6 to fit with the SysEx
UMP message.
Fixes: 0b5288f5fe63 ("ALSA: ump: Add legacy raw MIDI support")
Reported-by: Argusee <vr@darknavy.com>
Link: https://patch.msgid.link/20250429124845.25128-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There is no in-tree user to create the device using platform data
'struct tpa6130a2_platform_data', so drop the dead code.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250414-asoc-tpa6130a2-v1-2-5f4052e656a0@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
