summaryrefslogtreecommitdiff
path: root/net/core/rtnetlink.c
AgeCommit message (Collapse)Author
2024-03-07netlink: let core handle error cases in dump operationsEric Dumazet
After commit b5a899154aa9 ("netlink: handle EMSGSIZE errors in the core"), we can remove some code that was not 100 % correct anyway. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240306102426.245689-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/page_pool_user.c 0b11b1c5c320 ("netdev: let netlink core handle -EMSGSIZE errors") 429679dcf7d9 ("page_pool: fix netlink dump stop/resume") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-05dpll: move all dpll<>netdev helpers to dpll codeJakub Kicinski
Older versions of GCC really want to know the full definition of the type involved in rcu_assign_pointer(). struct dpll_pin is defined in a local header, net/core can't reach it. Move all the netdev <> dpll code into dpll, where the type is known. Otherwise we'd need multiple function calls to jump between the compilation units. This is the same problem the commit under fixes was trying to address, but with rcu_assign_pointer() not rcu_dereference(). Some of the exports are not needed, networking core can't be a module, we only need exports for the helpers used by drivers. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/ Fixes: 640f41ed33b5 ("dpll: fix build failure due to rcu_dereference_check() on unknown type") Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/20240228103048.19255709@canb.auug.org.au/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-28rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing backLin Ma
In the commit d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic in the function `rtnl_bridge_setlink` to enable the loop to also check the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment removed the `break` statement and led to an error logic of the flags writing back at the end of this function. if (have_flags) memcpy(nla_data(attr), &flags, sizeof(flags)); // attr should point to IFLA_BRIDGE_FLAGS NLA !!! Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS. However, this is not necessarily true fow now as the updated loop will let the attr point to the last NLA, even an invalid NLA which could cause overflow writes. This patch introduces a new variable `br_flag` to save the NLA pointer that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned error logic. Fixes: d73ef2d69c0d ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length") Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26rtnetlink: provide RCU protection to rtnl_fill_prop_list()Eric Dumazet
We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. dev->name_node items are already rcu protected. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26rtnetlink: make rtnl_fill_link_ifmap() RCU readyEric Dumazet
Use READ_ONCE() to read the following device fields: dev->mem_start dev->mem_end dev->base_addr dev->irq dev->dma dev->if_port Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26rtnetlink: add RTNL_FLAG_DUMP_UNLOCKED flagEric Dumazet
Similarly to RTNL_FLAG_DOIT_UNLOCKED, this new flag allows dump operations registered via rtnl_register() or rtnl_register_module() to opt-out from RTNL protection. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-26rtnetlink: prepare nla_put_iflink() to run under RCUEric Dumazet
We want to be able to run rtnl_fill_ifinfo() under RCU protection instead of RTNL in the future. This patch prepares dev_get_iflink() and nla_put_iflink() to run either with RTNL or RCU held. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: net/core/dev.c 9f30831390ed ("net: add rcu safety to rtnl_prop_list_size()") 723de3ebef03 ("net: free altname using an RCU callback") net/unix/garbage.c 11498715f266 ("af_unix: Remove io_uring code for GC.") 25236c91b5ab ("af_unix: Fix task hung while purging oob_skb in GC.") drivers/net/ethernet/renesas/ravb_main.c ed4adc07207d ("net: ravb: Count packets instead of descriptors in GbEth RX path" ) c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") net/mptcp/protocol.c bdd70eb68913 ("mptcp: drop the push_pending field") 28e5c1380506 ("mptcp: annotate lockless accesses around read-mostly fields") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-14net: remove dev_base_lock from do_setlink()Eric Dumazet
We hold RTNL here, and dev->link_mode readers already are using READ_ONCE(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14net: add netdev_set_operstate() helperEric Dumazet
dev_base_lock is going away, add netdev_set_operstate() helper so that hsr does not have to know core internals. Remove dev_base_lock acquisition from rfc2863_policy() v3: use an "unsigned int" for dev->operstate, so that try_cmpxchg() can work on all arches. ( https://lore.kernel.org/oe-kbuild-all/202402081918.OLyGaea3-lkp@intel.com/ ) Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14net-sysfs: convert dev->operstate reads to lockless onesEric Dumazet
operstate_show() can omit dev_base_lock acquisition only to read dev->operstate. Annotate accesses to dev->operstate. Writers still acquire dev_base_lock for mutual exclusion. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14dev: annotate accesses to dev->linkEric Dumazet
Following patch will read dev->link locklessly, annotate the write from do_setlink(). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-13rtnetlink: use xarray iterator to implement rtnl_dump_ifinfo()Eric Dumazet
Adopt net->dev_by_index as I did in commit 0e0939c0adf9 ("net-procfs: use xarray iterator to implement /proc/net/dev") This makes sure an existing device is always visible in the dump, regardless of concurrent insertions/deletions. v2: added suggestions from Jakub Kicinski and Ido Schimmel, thanks for the help ! Link: https://lore.kernel.org/all/20240209142441.6c56435b@kernel.org/ Link: https://lore.kernel.org/all/ZckR-XOsULLI9EHc@shredder/ Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20240211214404.1882191-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-12net: add rcu safety to rtnl_prop_list_size()Eric Dumazet
rtnl_prop_list_size() can be called while alternative names are added or removed concurrently. if_nlmsg_size() / rtnl_calcit() can indeed be called without RTNL held. Use explicit RCU protection to avoid UAF. Fixes: 88f4fb0c7496 ("net: rtnetlink: put alternative names to getlink message") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240209181248.96637-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-04net: make dev_unreg_count globalEric Dumazet
We can use a global dev_unreg_count counter instead of a per netns one. As a bonus we can factorize the changes done on it for bulk device removals. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-11Revert "net: rtnetlink: Enslave device before bringing it up"Nicolas Dichtel
This reverts commit a4abfa627c3865c37e036bccb681619a50d3d93c. The patch broke: > ip link set dummy0 up > ip link set dummy0 master bond0 down This last command is useful to be able to enslave an interface with only one netlink message. After discussion, there is no good reason to support: > ip link set dummy0 down > ip link set dummy0 master bond0 up because the bond interface already set the slave up when it is up. Cc: stable@vger.kernel.org Fixes: a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240108094103.2001224-2-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-20rtnetlink: bridge: Enable MDB bulk deletionIdo Schimmel
Now that both the common code as well as individual drivers support MDB bulk deletion, allow user space to make such requests. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-20rtnetlink: bridge: Invoke MDB bulk deletion when neededIdo Schimmel
Invoke the new MDB bulk deletion device operation when the 'NLM_F_BULK' flag is set in the netlink message header. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-20rtnetlink: bridge: Use a different policy for MDB bulk deleteIdo Schimmel
For MDB bulk delete we will need to validate 'MDBA_SET_ENTRY' differently compared to regular delete. Specifically, allow the ifindex to be zero (in case not filtering on bridge port) and force the address to be zero as bulk delete based on address is not supported. Do that by introducing a new policy and choosing the correct policy based on the presence of the 'NLM_F_BULK' flag in the netlink message header. Use nlmsg_parse() for strict validation. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-18net: rtnl: use rcu_replace_pointer_rtnl in rtnl_unregister_*Pedro Tammela
With the introduction of the rcu_replace_pointer_rtnl helper, cleanup the rtnl_unregister_* functions to use the helper instead of open coding it. Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-05net: core: synchronize link-watch when carrier is queriedJohannes Berg
There are multiple ways to query for the carrier state: through rtnetlink, sysfs, and (possibly) ethtool. Synchronize linkwatch work before these operations so that we don't have a situation where userspace queries the carrier state between the driver's carrier off->on transition and linkwatch running and expects it to work, when really (at least) TX cannot work until linkwatch has run. I previously posted a longer explanation of how this applies to wireless [1] but with this wireless can simply query the state before sending data, to ensure the kernel is ready for it. [1] https://lore.kernel.org/all/346b21d87c69f817ea3c37caceb34f1f56255884.camel@sipsolutions.net/ Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231204214706.303c62768415.I1caedccae72ee5a45c9085c5eb49c145ce1c0dd5@changeid Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-18rtnetlink: introduce nlmsg_new_large and use it in rtnl_getlinkLi RongQing
if a PF has 256 or more VFs, ip link command will allocate an order 3 memory or more, and maybe trigger OOM due to memory fragment, the VFs needed memory size is computed in rtnl_vfinfo_size. so introduce nlmsg_new_large which calls netlink_alloc_large_skb in which vmalloc is used for large memory, to avoid the failure of allocating memory ip invoked oom-killer: gfp_mask=0xc2cc0(GFP_KERNEL|__GFP_NOWARN|\ __GFP_COMP|__GFP_NOMEMALLOC), order=3, oom_score_adj=0 CPU: 74 PID: 204414 Comm: ip Kdump: loaded Tainted: P OE Call Trace: dump_stack+0x57/0x6a dump_header+0x4a/0x210 oom_kill_process+0xe4/0x140 out_of_memory+0x3e8/0x790 __alloc_pages_slowpath.constprop.116+0x953/0xc50 __alloc_pages_nodemask+0x2af/0x310 kmalloc_large_node+0x38/0xf0 __kmalloc_node_track_caller+0x417/0x4d0 __kmalloc_reserve.isra.61+0x2e/0x80 __alloc_skb+0x82/0x1c0 rtnl_getlink+0x24f/0x370 rtnetlink_rcv_msg+0x12c/0x350 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x1b2/0x280 netlink_sendmsg+0x355/0x4a0 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x1ea/0x250 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f95a65a5b70 Cc: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Li RongQing <lirongqing@baidu.com> Link: https://lore.kernel.org/r/20231115120108.3711-1-lirongqing@baidu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27rtnetlink: Add MDB get supportIdo Schimmel
Now that both the bridge and VXLAN drivers implement the MDB get net device operation, expose the functionality to user space by registering a handler for RTM_GETMDB messages. Derive the net device from the ifindex specified in the ancillary header and invoke its MDB get NDO. Note that unlike other get handlers, the allocation of the skb containing the response is not performed in the common rtnetlink code as the size is variable and needs to be determined by the respective driver. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. net/mac80211/key.c 02e0e426a2fb ("wifi: mac80211: fix error path key leak") 2a8b665e6bcc ("wifi: mac80211: remove key_mtx") 7d6904bf26b9 ("Merge wireless into wireless-next") https://lore.kernel.org/all/20231012113648.46eea5ec@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/ti/Kconfig a602ee3176a8 ("net: ethernet: ti: Fix mixed module-builtin object") 98bdeae9502b ("net: cpmac: remove driver to prepare for platform removal") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-16netlink: Correct offload_xstats sizeChristoph Paasch
rtnl_offload_xstats_get_size_hw_s_info_one() conditionalizes the size-computation for IFLA_OFFLOAD_XSTATS_HW_S_INFO_USED based on whether or not the device has offload_xstats enabled. However, rtnl_offload_xstats_fill_hw_s_info_one() is adding the u8 for that field uncondtionally. syzkaller triggered a WARNING in rtnl_stats_get due to this: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 754 at net/core/rtnetlink.c:5982 rtnl_stats_get+0x2f4/0x300 Modules linked in: CPU: 0 PID: 754 Comm: syz-executor148 Not tainted 6.6.0-rc2-g331b78eb12af #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 RIP: 0010:rtnl_stats_get+0x2f4/0x300 net/core/rtnetlink.c:5982 Code: ff ff 89 ee e8 7d 72 50 ff 83 fd a6 74 17 e8 33 6e 50 ff 4c 89 ef be 02 00 00 00 e8 86 00 fa ff e9 7b fe ff ff e8 1c 6e 50 ff <0f> 0b eb e5 e8 73 79 7b 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc900006837c0 EFLAGS: 00010293 RAX: ffffffff81cf7f24 RBX: ffff8881015d9000 RCX: ffff888101815a00 RDX: 0000000000000000 RSI: 00000000ffffffa6 RDI: 00000000ffffffa6 RBP: 00000000ffffffa6 R08: ffffffff81cf7f03 R09: 0000000000000001 R10: ffff888101ba47b9 R11: ffff888101815a00 R12: ffff8881017dae00 R13: ffff8881017dad00 R14: ffffc90000683ab8 R15: ffffffff83c1f740 FS: 00007fbc22dbc740(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000046 CR3: 000000010264e003 CR4: 0000000000170ef0 Call Trace: <TASK> rtnetlink_rcv_msg+0x677/0x710 net/core/rtnetlink.c:6480 netlink_rcv_skb+0xea/0x1c0 net/netlink/af_netlink.c:2545 netlink_unicast+0x430/0x500 net/netlink/af_netlink.c:1342 netlink_sendmsg+0x4fc/0x620 net/netlink/af_netlink.c:1910 sock_sendmsg+0xa8/0xd0 net/socket.c:730 ____sys_sendmsg+0x22a/0x320 net/socket.c:2541 ___sys_sendmsg+0x143/0x190 net/socket.c:2595 __x64_sys_sendmsg+0xd8/0x150 net/socket.c:2624 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7fbc22e8d6a9 Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc4320e778 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004007d0 RCX: 00007fbc22e8d6a9 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000004007d0 R10: 0000000000000008 R11: 0000000000000246 R12: 00007ffc4320e898 R13: 00007ffc4320e8a8 R14: 00000000004004a0 R15: 00007fbc22fa5a80 </TASK> ---[ end trace 0000000000000000 ]--- Which didn't happen prior to commit bf9f1baa279f ("net: add dedicated kmem_cache for typical/small skb->head") as the skb always was large enough. Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Link: https://lore.kernel.org/r/20231013041448.8229-1-cpaasch@apple.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-13net: Handle bulk delete policy in bridge driverAmit Cohen
The merge commit 92716869375b ("Merge branch 'br-flush-filtering'") added support for FDB flushing in bridge driver. The following patches will extend VXLAN driver to support FDB flushing as well. The netlink message for bulk delete is shared between the drivers. With the existing implementation, there is no way to prevent user from flushing with attributes that are not supported per driver. For example, when VNI will be added, user will not get an error for flush FDB entries in bridge with VNI, although this attribute is not relevant for bridge. As preparation for support of FDB flush in VXLAN driver, move the policy to be handled in bridge driver, later a new policy for VXLAN will be added in VXLAN driver. Do not pass 'vid' as part of ndo_fdb_del_bulk(), as this field is relevant only for bridge. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-17netdev: expose DPLL pin handle for netdeviceJiri Pirko
In case netdevice represents a SyncE port, the user needs to understand the connection between netdevice and associated DPLL pin. There might me multiple netdevices pointing to the same pin, in case of VF/SF implementation. Add a IFLA Netlink attribute to nest the DPLL pin handle, similar to how it is implemented for devlink port. Add a struct dpll_pin pointer to netdev and protect access to it by RTNL. Expose netdev_dpll_pin_set() and netdev_dpll_pin_clear() helpers to the drivers so they can set/clear the DPLL pin relationship to netdev. Note that during the lifetime of struct dpll_pin the pin handle does not change. Therefore it is save to access it lockless. It is drivers responsibility to call netdev_dpll_pin_clear() before dpll_pin_put(). Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-24rtnetlink: Reject negative ifindexes in RTM_NEWLINKIdo Schimmel
Negative ifindexes are illegal, but the kernel does not validate the ifindex in the ancillary header of RTM_NEWLINK messages, resulting in the kernel generating a warning [1] when such an ifindex is specified. Fix by rejecting negative ifindexes. [1] WARNING: CPU: 0 PID: 5031 at net/core/dev.c:9593 dev_index_reserve+0x1a2/0x1c0 net/core/dev.c:9593 [...] Call Trace: <TASK> register_netdevice+0x69a/0x1490 net/core/dev.c:10081 br_dev_newlink+0x27/0x110 net/bridge/br_netlink.c:1552 rtnl_newlink_create net/core/rtnetlink.c:3471 [inline] __rtnl_newlink+0x115e/0x18c0 net/core/rtnetlink.c:3688 rtnl_newlink+0x67/0xa0 net/core/rtnetlink.c:3701 rtnetlink_rcv_msg+0x439/0xd30 net/core/rtnetlink.c:6427 netlink_rcv_skb+0x16b/0x440 net/netlink/af_netlink.c:2545 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0x536/0x810 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x93c/0xe40 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:728 [inline] sock_sendmsg+0xd9/0x180 net/socket.c:751 ____sys_sendmsg+0x6ac/0x940 net/socket.c:2538 ___sys_sendmsg+0x135/0x1d0 net/socket.c:2592 __sys_sendmsg+0x117/0x1e0 net/socket.c:2621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 38f7b870d4a6 ("[RTNETLINK]: Link creation API") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20230823064348.2252280-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-20net: validate veth and vxcan peer ifindexesJakub Kicinski
veth and vxcan need to make sure the ifindexes of the peer are not negative, core does not validate this. Using iproute2 with user-space-level checking removed: Before: # ./ip link add index 10 type veth peer index -1 # ip link show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000 link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff 10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff -1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff Now: $ ./ip link add index 10 type veth peer index -1 Error: ifindex can't be negative. This problem surfaced in net-next because an explicit WARN() was added, the root cause is older. Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex") Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE lengthLin Ma
There are totally 9 ndo_bridge_setlink handlers in the current kernel, which are 1) bnxt_bridge_setlink, 2) be_ndo_bridge_setlink 3) i40e_ndo_bridge_setlink 4) ice_bridge_setlink 5) ixgbe_ndo_bridge_setlink 6) mlx5e_bridge_setlink 7) nfp_net_bridge_setlink 8) qeth_l2_bridge_setlink 9) br_setlink. By investigating the code, we find that 1-7 parse and use nlattr IFLA_BRIDGE_MODE but 3 and 4 forget to do the nla_len check. This can lead to an out-of-attribute read and allow a malformed nlattr (e.g., length 0) to be viewed as a 2 byte integer. To avoid such issues, also for other ndo_bridge_setlink handlers in the future. This patch adds the nla_len check in rtnl_bridge_setlink and does an early error return if length mismatches. To make it works, the break is removed from the parsing for IFLA_BRIDGE_FLAGS to make sure this nla_for_each_nested iterates every attribute. Fixes: b1edc14a3fbf ("ice: Implement ice_bridge_getlink and ice_bridge_setlink") Fixes: 51616018dd1b ("i40e: Add support for getlink, setlink ndo ops") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Lin Ma <linma@zju.edu.cn> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230726075314.1059224-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-19bridge: Add backup nexthop ID supportIdo Schimmel
Add a new bridge port attribute that allows attaching a nexthop object ID to an skb that is redirected to a backup bridge port with VLAN tunneling enabled. Specifically, when redirecting a known unicast packet, read the backup nexthop ID from the bridge port that lost its carrier and set it in the bridge control block of the skb before forwarding it via the backup port. Note that reading the ID from the bridge port should not result in a cache miss as the ID is added next to the 'backup_port' field that was already accessed. After this change, the 'state' field still stays on the first cache line, together with other data path related fields such as 'flags and 'vlgrp': struct net_bridge_port { struct net_bridge * br; /* 0 8 */ struct net_device * dev; /* 8 8 */ netdevice_tracker dev_tracker; /* 16 0 */ struct list_head list; /* 16 16 */ long unsigned int flags; /* 32 8 */ struct net_bridge_vlan_group * vlgrp; /* 40 8 */ struct net_bridge_port * backup_port; /* 48 8 */ u32 backup_nhid; /* 56 4 */ u8 priority; /* 60 1 */ u8 state; /* 61 1 */ u16 port_no; /* 62 2 */ /* --- cacheline 1 boundary (64 bytes) --- */ [...] } __attribute__((__aligned__(8))); When forwarding an skb via a bridge port that has VLAN tunneling enabled, check if the backup nexthop ID stored in the bridge control block is valid (i.e., not zero). If so, instead of attaching the pre-allocated metadata (that only has the tunnel key set), allocate a new metadata, set both the tunnel key and the nexthop object ID and attach it to the skb. By default, do not dump the new attribute to user space as a value of zero is an invalid nexthop object ID. The above is useful for EVPN multihoming. When one of the links composing an Ethernet Segment (ES) fails, traffic needs to be redirected towards the host via one of the other ES peers. For example, if a host is multihomed to three different VTEPs, the backup port of each ES link needs to be set to the VXLAN device and the backup nexthop ID needs to point to an FDB nexthop group that includes the IP addresses of the other two VTEPs. The VXLAN driver will extract the ID from the metadata of the redirected skb, calculate its flow hash and forward it towards one of the other VTEPs. If the ID does not exist, or represents an invalid nexthop object, the VXLAN driver will drop the skb. This relieves the bridge driver from the need to validate the ID. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-18rtnetlink: Move nesting cancellation rollback to proper functionGal Pressman
Make rtnl_fill_vf() cancel the vfinfo attribute on error instead of the inner rtnl_fill_vfinfo(), as it is the function that starts it. Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20230716072440.2372567-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-22netlink: do not hard code device address lenth in fdb dumpsEric Dumazet
syzbot reports that some netdev devices do not have a six bytes address [1] Replace ETH_ALEN by dev->addr_len. [1] (Case of a device where dev->addr_len = 4) BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copyout+0xb8/0x100 lib/iov_iter.c:169 _copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536 copy_to_iter include/linux/uio.h:206 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg net/socket.c:1040 [inline] ____sys_recvmsg+0x283/0x7f0 net/socket.c:2722 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was stored to memory at: __nla_put lib/nlattr.c:1009 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1067 nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071 nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline] ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456 rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629 netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268 netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995 sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019 ____sys_recvmsg+0x664/0x7f0 net/socket.c:2720 ___sys_recvmsg+0x223/0x840 net/socket.c:2764 do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716 slab_alloc_node mm/slub.c:3451 [inline] __kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490 kmalloc_trace+0x51/0x200 mm/slab_common.c:1057 kmalloc include/linux/slab.h:559 [inline] __hw_addr_create net/core/dev_addr_lists.c:60 [inline] __hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118 __dev_mc_add net/core/dev_addr_lists.c:867 [inline] dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885 igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680 ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754 ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708 addrconf_type_change net/ipv6/addrconf.c:3731 [inline] addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461 call_netdevice_notifiers_info net/core/dev.c:1935 [inline] call_netdevice_notifiers_extack net/core/dev.c:1973 [inline] call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987 bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906 do_set_master net/core/rtnetlink.c:2626 [inline] rtnl_newlink_create net/core/rtnetlink.c:3460 [inline] __rtnl_newlink net/core/rtnetlink.c:3660 [inline] rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673 rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395 netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0xf28/0x1230 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x122f/0x13d0 net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x999/0xd50 net/socket.c:2503 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2557 __sys_sendmsg net/socket.c:2586 [inline] __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __x64_sys_sendmsg+0x304/0x490 net/socket.c:2593 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Bytes 2856-2857 of 3500 are uninitialized Memory access of size 3500 starts at ffff888018d99104 Data copied to user address 0000000020000480 Fixes: d83b06036048 ("net: add fdb generic dump routine") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230621174720.1845040-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-14rtnetlink: move validate_linkmsg out of do_setlinkXin Long
This patch moves validate_linkmsg() out of do_setlink() to its callers and deletes the early validate_linkmsg() call in __rtnl_newlink(), so that it will not call validate_linkmsg() twice in either of the paths: - __rtnl_newlink() -> do_setlink() - __rtnl_newlink() -> rtnl_newlink_create() -> rtnl_create_link() Additionally, as validate_linkmsg() is now only called with a real dev, we can remove the NULL check for dev in validate_linkmsg(). Note that we moved validate_linkmsg() check to the places where it has not done any changes to the dev, as Jakub suggested. Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/cf2ef061e08251faf9e8be25ff0d61150c030475.1686585334.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-14rtnetlink: extend RTEXT_FILTER_SKIP_STATS to IFLA_VF_INFOEdwin Peer
This filter already exists for excluding IPv6 SNMP stats. Extend its definition to also exclude IFLA_VF_INFO stats in RTM_GETLINK. This patch constitutes a partial fix for a netlink attribute nesting overflow bug in IFLA_VFINFO_LIST. By excluding the stats when the requester doesn't need them, the truncation of the VF list is avoided. While it was technically only the stats added in commit c5a9f6f0ab40 ("net/core: Add drop counters to VF statistics") breaking the camel's back, the appreciable size of the stats data should never have been included without due consideration for the maximum number of VFs supported by PCI. Fixes: 3b766cd83232 ("net/core: Add reading VF statistics through the PF netdevice") Fixes: c5a9f6f0ab40 ("net/core: Add drop counters to VF statistics") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Cc: Edwin Peer <espeer@gmail.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Link: https://lore.kernel.org/r/20230611105108.122586-1-gal@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-06-01rtnetlink: add the missing IFLA_GRO_ tb check in validate_linkmsgXin Long
This fixes the issue that dev gro_max_size and gso_ipv4_max_size can be set to a huge value: # ip link add dummy1 type dummy # ip link set dummy1 gro_max_size 4294967295 # ip -d link show dummy1 dummy addrgenmode eui64 ... gro_max_size 4294967295 Fixes: 0fe79f28bfaf ("net: allow gro_max_size to exceed 65536") Fixes: 9eefedd58ae1 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-01rtnetlink: move IFLA_GSO_ tb check to validate_linkmsgXin Long
These IFLA_GSO_* tb check should also be done for the new created link, otherwise, they can be set to a huge value when creating links: # ip link add dummy1 gso_max_size 4294967295 type dummy # ip -d link show dummy1 dummy addrgenmode eui64 ... gso_max_size 4294967295 Fixes: 46e6b992c250 ("rtnetlink: allow GSO maximums to be set on device creation") Fixes: 9eefedd58ae1 ("net: add gso_ipv4_max_size and gro_ipv4_max_size per device") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-01rtnetlink: call validate_linkmsg in rtnl_create_linkXin Long
validate_linkmsg() was introduced by commit 1840bb13c22f5b ("[RTNL]: Validate hardware and broadcast address attribute for RTM_NEWLINK") to validate tb[IFLA_ADDRESS/BROADCAST] for existing links. The same check should also be done for newly created links. This patch adds validate_linkmsg() call in rtnl_create_link(), to avoid the invalid address set when creating some devices like: # ip link add dummy0 type dummy # ip link add link dummy0 name mac0 address 01:02 type macsec Fixes: 0e06877c6fdb ("[RTNETLINK]: rtnl_link: allow specifying initial device address") Signed-off-by: Xin Long <lucien.xin@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-21bridge: Allow setting per-{Port, VLAN} neighbor suppression stateIdo Schimmel
Add a new bridge port attribute that allows user space to enable per-{Port, VLAN} neighbor suppression. Example: # bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]' false # bridge link set dev swp1 neigh_vlan_suppress on # bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]' true # bridge link set dev swp1 neigh_vlan_suppress off # bridge -d -j -p link show dev swp1 | jq '.[]["neigh_vlan_suppress"]' false Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: tools/testing/selftests/net/config 62199e3f1658 ("selftests: net: Add VXLAN MDB test") 3a0385be133e ("selftests: add the missing CONFIG_IP_SCTP in net config") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-12rtnetlink: Restore RTM_NEW/DELLINK notification behaviorMartin Willi
The commits referenced below allows userspace to use the NLM_F_ECHO flag for RTM_NEW/DELLINK operations to receive unicast notifications for the affected link. Prior to these changes, applications may have relied on multicast notifications to learn the same information without specifying the NLM_F_ECHO flag. For such applications, the mentioned commits changed the behavior for requests not using NLM_F_ECHO. Multicast notifications are still received, but now use the portid of the requester and the sequence number of the request instead of zero values used previously. For the application, this message may be unexpected and likely handled as a response to the NLM_F_ACKed request, especially if it uses the same socket to handle requests and notifications. To fix existing applications relying on the old notification behavior, set the portid and sequence number in the notification only if the request included the NLM_F_ECHO flag. This restores the old behavior for applications not using it, but allows unicasted notifications for others. Fixes: f3a63cce1b4f ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link") Fixes: d88e136cab37 ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create") Signed-off-by: Martin Willi <martin@strongswan.org> Acked-by: Guillaume Nault <gnault@redhat.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-28net: dst: Switch to rcuref_t reference countingThomas Gleixner
Under high contention dst_entry::__refcnt becomes a significant bottleneck. atomic_inc_not_zero() is implemented with a cmpxchg() loop, which goes into high retry rates on contention. Switch the reference count to rcuref_t which results in a significant performance gain. Rename the reference count member to __rcuref to reflect the change. The gain depends on the micro-architecture and the number of concurrent operations and has been measured in the range of +25% to +130% with a localhost memtier/memcached benchmark which amplifies the problem massively. Running the memtier/memcached benchmark over a real (1Gb) network connection the conversion on top of the false sharing fix for struct dst_entry::__refcnt results in a total gain in the 2%-5% range over the upstream baseline. Reported-by: Wangyang Guo <wangyang.guo@intel.com> Reported-by: Arjan Van De Ven <arjan.van.de.ven@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20230307125538.989175656@linutronix.de Link: https://lore.kernel.org/r/20230323102800.215027837@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-17rtnetlink: bridge: mcast: Relax group address validation in common codeIdo Schimmel
In the upcoming VXLAN MDB implementation, the 0.0.0.0 and :: MDB entries will act as catchall entries for unregistered IP multicast traffic in a similar fashion to the 00:00:00:00:00:00 VXLAN FDB entry that is used to transmit BUM traffic. In deployments where inter-subnet multicast forwarding is used, not all the VTEPs in a tenant domain are members in all the broadcast domains. It is therefore advantageous to transmit BULL (broadcast, unknown unicast and link-local multicast) and unregistered IP multicast traffic on different tunnels. If the same tunnel was used, a VTEP only interested in IP multicast traffic would also pull all the BULL traffic and drop it as it is not a member in the originating broadcast domain [1]. Prepare for this change by allowing the 0.0.0.0 group address in the common rtnetlink MDB code and forbid it in the bridge driver. A similar change is not needed for IPv6 because the common code only validates that the group address is not the all-nodes address. [1] https://datatracker.ietf.org/doc/html/draft-ietf-bess-evpn-irb-mcast#section-2.6 Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-17rtnetlink: bridge: mcast: Move MDB handlers out of bridge driverIdo Schimmel
Currently, the bridge driver registers handlers for MDB netlink messages, making it impossible for other drivers to implement MDB support. As a preparation for VXLAN MDB support, move the MDB handlers out of the bridge driver to the core rtnetlink code. The rtnetlink code will call into individual drivers by invoking their previously added MDB net device operations. Note that while the diffstat is large, the change is mechanical. It moves code out of the bridge driver to rtnetlink code. Also note that a similar change was made in 2012 with commit 77162022ab26 ("net: add generic PF_BRIDGE:RTM_ FDB hooks") that moved FDB handlers out of the bridge driver to the core rtnetlink code. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-06net: bridge: Add netlink knobs for number / maximum MDB entriesPetr Machata
The previous patch added accounting for number of MDB entries per port and per port-VLAN, and the logic to verify that these values stay within configured bounds. However it didn't provide means to actually configure those bounds or read the occupancy. This patch does that. Two new netlink attributes are added for the MDB occupancy: IFLA_BRPORT_MCAST_N_GROUPS for the per-port occupancy and BRIDGE_VLANDB_ENTRY_MCAST_N_GROUPS for the per-port-VLAN occupancy. And another two for the maximum number of MDB entries: IFLA_BRPORT_MCAST_MAX_GROUPS for the per-port maximum, and BRIDGE_VLANDB_ENTRY_MCAST_MAX_GROUPS for the per-port-VLAN one. Note that the two new IFLA_BRPORT_ attributes prompt bumping of RTNL_SLAVE_MAX_TYPE to size the slave attribute tables large enough. The new attributes are used like this: # ip link add name br up type bridge vlan_filtering 1 mcast_snooping 1 \ mcast_vlan_snooping 1 mcast_querier 1 # ip link set dev v1 master br # bridge vlan add dev v1 vid 2 # bridge vlan set dev v1 vid 1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 1 # bridge mdb add dev br port v1 grp 230.1.2.4 temp vid 1 Error: bridge: Port-VLAN is already in 1 groups, and mcast_max_groups=1. # bridge link set dev v1 mcast_max_groups 1 # bridge mdb add dev br port v1 grp 230.1.2.3 temp vid 2 Error: bridge: Port is already in 1 groups, and mcast_max_groups=1. # bridge -d link show 5: v1@v2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br [...] [...] mcast_n_groups 1 mcast_max_groups 1 # bridge -d vlan show port vlan-id br 1 PVID Egress Untagged state forwarding mcast_router 1 v1 1 PVID Egress Untagged [...] mcast_n_groups 1 mcast_max_groups 1 2 [...] mcast_n_groups 0 mcast_max_groups 0 Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-04-27 18:17:23 +0000