summaryrefslogtreecommitdiff
path: root/net/dccp/diag.c
AgeCommit message (Collapse)Author
2024-01-23inet_diag: add module pointer to "struct inet_diag_handler"Eric Dumazet
Following patch is going to use RCU instead of inet_diag_table_mutex acquisition. This patch is a preparation, no change of behavior yet. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2020-02-27inet_diag: Move the INET_DIAG_REQ_BYTECODE nlattr to cb->dataMartin KaFai Lau
The INET_DIAG_REQ_BYTECODE nlattr is currently re-found every time when the "dump()" is re-started. In a latter patch, it will also need to parse the new INET_DIAG_REQ_SK_BPF_STORAGES nlattr to learn the map_fds. Thus, this patch takes this chance to store the parsed nlattr in cb->data during the "start" time of a dump. By doing this, the "bc" argument also becomes unnecessary and is removed. Also, the two copies of the INET_DIAG_REQ_BYTECODE parsing-audit logic between compat/current version can be consolidated to one. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230415.1975555-1-kafai@fb.com
2020-02-27inet_diag: Refactor inet_sk_diag_fill(), dump(), and dump_one()Martin KaFai Lau
In a latter patch, there is a need to update "cb->min_dump_alloc" in inet_sk_diag_fill() as it learns the diffierent bpf_sk_storages stored in a sk while dumping all sk(s) (e.g. tcp_hashinfo). The inet_sk_diag_fill() currently does not take the "cb" as an argument. One of the reason is inet_sk_diag_fill() is used by both dump_one() and dump() (which belong to the "struct inet_diag_handler". The dump_one() interface does not pass the "cb" along. This patch is to make dump_one() pass a "cb". The "cb" is created in inet_diag_cmd_exact(). The "nlh" and "in_skb" are stored in "cb" as the dump() interface does. The total number of args in inet_sk_diag_fill() is also cut from 10 to 7 and that helps many callers to pass fewer args. In particular, "struct user_namespace *user_ns", "u32 pid", and "u32 seq" can be replaced by accessing "cb->nlh" and "cb->skb". A similar argument reduction is also made to inet_twsk_diag_fill() and inet_req_diag_fill(). inet_csk_diag_dump() and inet_csk_diag_fill() are also removed. They are mostly equivalent to inet_sk_diag_fill(). Their repeated usages are very limited. Thus, inet_sk_diag_fill() is directly used in those occasions. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200225230409.1975173-1-kafai@fb.com
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-15sock_diag: specify info_size per inet protocolCraig Gallek
Previously, there was no clear distinction between the inet protocols that used struct tcp_info to report information and those that didn't. This change adds a specific size attribute to the inet_diag_handler struct which defines these interfaces. This will make dispatching sock_diag get_info requests identical for all inet protocols in a following patch. Tested: ss -au Tested: ss -at Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10inet_diag: add const to inet_diag_req_v2Eric Dumazet
diag dumpers should not modify the request. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-11inet_diag: Rename inet_diag_req into inet_diag_req_v2Pavel Emelyanov
Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16sock_diag: Fix module netlink aliasesPavel Emelyanov
I've made a mistake when fixing the sock_/inet_diag aliases :( 1. The sock_diag layer should request the family-based alias, not just the IPPROTO_IP one; 2. The inet_diag layer should request for AF_INET+protocol alias, not just the protocol one. Thus fix this. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09inet_diag: Generalize inet_diag dump and get_exact callsPavel Emelyanov
Introduce two callbacks in inet_diag_handler -- one for dumping all sockets (with filters) and the other one for dumping a single sk. Replace direct calls to icsk handlers with indirect calls to callbacks provided by handlers. Make existing TCP and DCCP handlers use provided helpers for icsk-s. The UDP diag module will provide its own. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09inet_diag: Remove indirect sizeof from inet diag handlersPavel Emelyanov
There's an info_size value stored on inet_diag_handler, but for existing code this value is effectively constant, so just use sizeof(struct tcp_info) where required. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Switch from _GETSOCK to IPPROTO_ numbersPavel Emelyanov
Sorry, but the vger didn't let this message go to the list. Re-sending it with less spam-filter-prone subject. When dumping the AF_INET/AF_INET6 sockets user will also specify the protocol, so prepare the protocol diag handlers to work with IPPROTO_ constants. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06inet_diag: Partly rename inet_ to sock_Pavel Emelyanov
The ultimate goal is to get the sock_diag module, that works in family+protocol terms. Currently this is suitable to do on the inet_diag basis, so rename parts of the code. It will be moved to sock_diag.c later. Signed-off-by: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-17dccp_diag: LISTEN sockets don't have CCIDsArnaldo Carvalho de Melo
And thus when we try to use 'ss -danemi' on these sockets that have no ccid blocks (data collected using systemtap after I fixed the problem): dccp_diag_get_info sk=0xffff8801220a3100, dp->dccps_hc_rx_ccid=0x0000000000000000, dp->dccps_hc_tx_ccid=0x0000000000000000 We get an OOPS: mica.ghostprotocols.net login: BUG: unable to handle kernel NULL pointer dereferenc0 IP: [<ffffffffa0136082>] dccp_diag_get_info+0x82/0xc0 [dccp_diag] PGD 12106f067 PUD 122488067 PMD 0 Oops: 0000 [#1] PREEMPT Fix is trivial, and 'ss -d' is working again: [root@mica ~]# ss -danemi State Recv-Q Send-Q Local Address:Port Peer Address:Port LISTEN 0 0 *:5001 *:* ino:7288 sk:220a3100ffff8801 mem:(r0,w0,f0,t0) cwnd:0 ssthresh:0 [root@mica ~]# Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08dccp ccid-2: Phase out the use of boolean Ack Vector sysctlGerrit Renker
This removes the use of the sysctl and the minisock variable for the Send Ack Vector feature, as it now is handled fully dynamically via feature negotiation (i.e. when CCID-2 is enabled, Ack Vectors are automatically enabled as per RFC 4341, 4.). Using a sysctl in parallel to this implementation would open the door to crashes, since much of the code relies on tests of the boolean minisock / sysctl variable. Thus, this patch replaces all tests of type if (dccp_msk(sk)->dccpms_send_ack_vector) /* ... */ with if (dp->dccps_hc_rx_ackvec != NULL) /* ... */ The dccps_hc_rx_ackvec is allocated by the dccp_hdlr_ackvec() when feature negotiation concluded that Ack Vectors are to be used on the half-connection. Otherwise, it is NULL (due to dccp_init_sock/dccp_create_openreq_child), so that the test is a valid one. The activation handler for Ack Vectors is called as soon as the feature negotiation has concluded at the * server when the Ack marking the transition RESPOND => OPEN arrives; * client after it has sent its ACK, marking the transition REQUEST => PARTOPEN. Adding the sequence number of the Response packet to the Ack Vector has been removed, since (a) connection establishment implies that the Response has been received; (b) the CCIDs only look at packets received in the (PART)OPEN state, i.e. this entry will always be ignored; (c) it can not be used for anything useful - to detect loss for instance, only packets received after the loss can serve as pseudo-dupacks. There was a FIXME to change the error code when dccp_ackvec_add() fails. I removed this after finding out that: * the check whether ackno < ISN is already made earlier, * this Response is likely the 1st packet with an Ackno that the client gets, * so when dccp_ackvec_add() fails, the reason is likely not a packet error. Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-19net: inet_diag_handler structs can be constEric Dumazet
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-22[INET]: Let inet_diag and friends autoloadJean Delvare
By adding module aliases to inet_diag, tcp_diag and dccp_diag, we let them load automatically as needed. This makes tools like "ss" run faster. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-03-20[DCCP] minisock: Rename struct dccp_options to struct dccp_minisockArnaldo Carvalho de Melo
This will later be included in struct dccp_request_sock so that we can have per connection feature negotiation state while in the 3way handshake, when we clone the DCCP_ROLE_LISTEN socket (in dccp_create_openreq_child) we'll just copy this state from dreq_minisock to dccps_minisock. Also the feature negotiation and option parsing code will mostly touch dccps_minisock, which will simplify some stuff. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03[IP_SOCKGLUE]: Remove most of the tcp specific callsArnaldo Carvalho de Melo
As DCCP needs to be called in the same spots. Now we have a member in inet_sock (is_icsk), set at sock creation time from struct inet_protosw->flags (if INET_PROTOSW_ICSK is set, like for TCP and DCCP) to see if a struct sock instance is a inet_connection_sock for places like the ones in ip_sockglue.c (v4 and v6) where we previously were looking if sk_type was SOCK_STREAM, that is insufficient because we now use the same code for DCCP, that has sk_type SOCK_DCCP. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[DCCP]: Introduce dccp_get_infoArnaldo Carvalho de Melo
And also hc_tx and hc_rx get_info functions for the CCIDs to fill in information that is specific to them. For now reusing struct tcp_info, later I'll try to figure out a better solution, for now its really nice to get this kind of info: [root@qemu ~]# ./ss -danemi State Recv-Q Send-Q Local Addr:Port Peer Addr:Port LISTEN 0 0 *:5001 *:* ino:628 sk:c1340040 mem:(r0,w0,f0,t0) cwnd:0 ssthresh:0 ESTAB 0 0 172.20.0.2:5001 172.20.0.1:32785 ino:629 sk:c13409a0 mem:(r0,w0,f0,t0) ts rto:1000 rtt:0.004/0 cwnd:0 ssthresh:0 rcv_rtt:61.377 This, for instance, shows that we're not congestion controlling ACKs, as the above output is in the ttcp receiving host, and ttcp is a one way app, i.e. the received never calls sendmsg, so ccid_hc_tx_send_packet is never called, so the TX half connection stays in TFRC_SSTATE_NO_SENT state and hctx_rtt is never calculated, stays with the value set in ccid3_hc_tx_init, 4us, as show above in milliseconds (0.004ms), upcoming patches will fix this. rcv_rtt seems sane tho, matching ping results :-) Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[INET_DIAG]: Rename tcp_diag.[ch] to inet_diag.[ch]Arnaldo Carvalho de Melo
Next changeset will introduce net/ipv4/tcp_diag.c, moving the code that was put transitioanlly in inet_diag.c. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TCPDIAG]: Just rename everything to inet_diagArnaldo Carvalho de Melo
Next changeset will rename tcp_diag.[ch] to inet_diag.[ch]. I'm taking this longer route so as to easy review, making clear the changes made all along the way. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29[TCPDIAG]: Introduce inet_diag_{register,unregister}Arnaldo Carvalho de Melo
Next changeset will rename tcp_diag to inet_diag and move the tcp_diag code out of it and into a new tcp_diag.c, similar to the net/dccp/diag.c introduced in this changeset, completing the transition to a generic inet_diag infrastructure. Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com> Signed-off-by: David S. Miller <davem@davemloft.net>