| Age | Commit message (Collapse) | Author |
|---|
|
This patch enables the GRO codepath for IPv6 ESP in UDP encapsulated
packets. Decapsulation happens at L2 and saves a full round through
the stack for each packet. This is also needed to support HW offload
for ESP in UDP encapsulation.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
|
|
This is needed to support GRO for ESP in UDP encapsulation.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Co-developed-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
tools/testing/selftests/net/fcnal-test.sh
d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/5007b52c-dd16-dbf6-8d64-b9701bfa498b@tessares.net/
https://lore.kernel.org/all/20230619105427.4a0df9b3@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With offloading enabled, esp_xmit() gets invoked very late, from within
validate_xmit_xfrm() which is after validate_xmit_skb() validates and
linearizes the skb if the underlying device does not support fragments.
esp_output_tail() may add a fragment to the skb while adding the auth
tag/ IV. Devices without the proper support will then send skb->data
points to with the correct length so the packet will have garbage at the
end. A pcap sniffer will claim that the proper data has been sent since
it parses the skb properly.
It is not affected with INET_ESP_OFFLOAD disabled.
Linearize the skb after offloading if the sending hardware requires it.
It was tested on v4, v6 has been adopted.
Fixes: 7785bba299a8d ("esp: Add a software GRO codepath")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Move declarations into include/net/gso.h and code into net/core/gso.c
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230608191738.3947077-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next 2022-11-26
1) Remove redundant variable in esp6.
From Colin Ian King.
2) Update x->lastused for every packet. It was used only for
outgoing mobile IPv6 packets, but showed to be usefull
to check if the a SA is still in use in general.
From Antony Antony.
3) Remove unused variable in xfrm_byidx_resize.
From Leon Romanovsky.
4) Finalize extack support for xfrm.
From Sabrina Dubroca.
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: add extack to xfrm_set_spdinfo
xfrm: add extack to xfrm_alloc_userspi
xfrm: add extack to xfrm_do_migrate
xfrm: add extack to xfrm_new_ae and xfrm_replay_verify_len
xfrm: add extack to xfrm_del_sa
xfrm: add extack to xfrm_add_sa_expire
xfrm: a few coding style clean ups
xfrm: Remove not-used total variable
xfrm: update x->lastused for every packet
esp6: remove redundant variable err
====================
Link: https://lore.kernel.org/r/20221126110303.1859238-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Variable err is being assigned a value that is not read, the assignment
is redundant and so is the variable. Remove it.
Cleans up clang scan warning:
net/ipv6/esp6_offload.c:64:7: warning: Although the value stored to 'err'
is used in the enclosing expression, the value is never actually read
from 'err' [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When using GSO it can happen that the wrong seq_hi is used for the last
packets before the wrap around. This can lead to double usage of a
sequence number. To avoid this, we should serialize this last GSO
packet.
Fixes: d7dbefc45cf5 ("xfrm: Add xfrm_replay_overflow functions for offloading")
Co-developed-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Christian Langrock <christian.langrock@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Commit 23c7f8d7989e ("net: Fix esp GSO on inter address family
tunnels.") is incomplete. It passes to skb_eth_gso_segment the
protocol for the outer IP version, instead of the inner IP version, so
we end up calling inet_gso_segment on an inner IPv6 packet and
ipv6_gso_segment on an inner IPv4 packet and the packets are dropped.
This patch completes the fix by selecting the correct protocol based
on the inner mode's family.
Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The esp tunnel GSO handlers use skb_mac_gso_segment to
push the inner packet to the segmentation handlers.
However, skb_mac_gso_segment takes the Ethernet Protocol
ID from 'skb->protocol' which is wrong for inter address
family tunnels. We fix this by introducing a new
skb_eth_gso_segment function.
This function can be used if it is necessary to pass the
Ethernet Protocol ID directly to the segmentation handler.
First users of this function will be the esp4 and esp6
tunnel segmentation handlers.
Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The xfrm{4,6}_beet_gso_segment() functions did not correctly set the
SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 gso types for the address family
tunneling case. Fix this by setting these gso types.
Fixes: 384a46ea7bdc7 ("esp4: add gso_segment for esp4 beet mode")
Fixes: 7f9e40eb18a99 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
include/linux/netdevice.h became too big, move gro stuff
into include/net/gro.h
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2021-04-14
Not much this time:
1) Simplification of some variable calculations in esp4 and esp6.
From Jiapeng Chong and Junlin Yang.
2) Fix a clang Wformat warning in esp6 and ah6.
From Arnd Bergmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec
crypto offload.") added a XFRM_XMIT flag to avoid duplicate ESP trailer
insertion on HW offload. This flag is set on the secpath that is shared
amongst segments. This lead to a situation where some segments are
not transformed correctly when segmentation happens at layer 3.
Fix this by using private skb extensions for segmented and hw offloaded
ESP packets.
Fixes: 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in IPsec crypto offload.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Now in esp4/6_gso_segment(), before calling inner proto .gso_segment,
NETIF_F_CSUM_MASK bits are deleted, as HW won't be able to do the
csum for inner proto due to the packet encrypted already.
So the UDP/TCP packet has to do the checksum on its own .gso_segment.
But SCTP is using CRC checksum, and for that NETIF_F_SCTP_CRC should
be deleted to make SCTP do the csum in own .gso_segment as well.
In Xiumei's testing with SCTP over IPsec/veth, the packets are kept
dropping due to the wrong CRC checksum.
Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Fixes coccicheck warnings:
./net/ipv6/esp6_offload.c:319:32-34:
WARNING !A || A && B is equivalent to !A || B
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The user tool modinfo is used to get information on kernel modules, including a
description where it is available.
This patch adds a brief MODULE_DESCRIPTION to the following modules:
9p
drop_monitor
esp4_offload
esp6_offload
fou
fou6
ila
sch_fq
sch_fq_codel
sch_hhf
Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
xdp_umem.c had overlapping changes between the 64-bit math fix
for the calculation of npgs and the removal of the zerocopy
memory type which got rid of the chunk_size_nohdr member.
The mlx5 Kconfig conflict is a case where we just take the
net-next copy of the Kconfig entry dependency as it takes on
the ESWITCH dependency by one level of indirection which is
what the 'net' conflicting change is trying to ensure.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In esp6_init_state() for beet mode when x->sel.family != AF_INET6:
x->props.header_len = sizeof(struct ip_esp_hdr) +
crypto_aead_ivsize(aead) + IPV4_BEET_PHMAXLEN +
(sizeof(struct ipv6hdr) - sizeof(struct iphdr))
In xfrm6_beet_gso_segment() skb->transport_header is supposed to move
to the end of the ph header for IPPROTO_BEETPH, so if x->sel.family !=
AF_INET6 and it's IPPROTO_BEETPH, it should do:
skb->transport_header -=
(sizeof(struct ipv6hdr) - sizeof(struct iphdr));
skb->transport_header += ph->hdrlen * 8;
And IPV4_BEET_PHMAXLEN is only reserved for PH header, so if
x->sel.family != AF_INET6 and it's not IPPROTO_BEETPH, it should do:
skb->transport_header -=
(sizeof(struct ipv6hdr) - sizeof(struct iphdr));
skb->transport_header -= IPV4_BEET_PHMAXLEN;
Thanks Sabrina for looking deep into this issue.
Fixes: 7f9e40eb18a9 ("esp6: add gso_segment for esp6 beet mode")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This patch adds support for encapsulation of ESP over UDPv6. The code
is very similar to the IPv4 encapsulation implementation, and allows
to easily add espintcp on IPv6 as a follow-up.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
For beet mode, when it's ipv6 inner address with nexthdrs set,
the packet format might be:
----------------------------------------------------
| outer | | dest | | | ESP | ESP |
| IP6 hdr| ESP | opts.| TCP | Data | Trailer | ICV |
----------------------------------------------------
Before doing gso segment in xfrm6_beet_gso_segment(), it should
skip all nexthdrs and get the real transport proto, and set
transport_header properly.
This patch is to fix it by simply calling ipv6_skip_exthdr()
in xfrm6_beet_gso_segment().
v1->v2:
- remove skb_transport_offset(), as it will always return 0
in xfrm6_beet_gso_segment(), thank Sabrina's check.
Fixes: 7f9e40eb18a9 ("esp6: add gso_segment for esp6 beet mode")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This xfrm_state_put call in esp4/6_gro_receive() will cause
double put for state, as in out_reset path secpath_reset()
will put all states set in skb sec_path.
So fix it by simply remove the xfrm_state_put call.
Fixes: 6ed69184ed9c ("xfrm: Reset secpath in xfrm failure")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
For transport mode, when ipv6 nexthdr is set, the packet format might
be like:
----------------------------------------------------
| | dest | | | | ESP | ESP |
| IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV |
----------------------------------------------------
What it wants to get for x-proto in esp6_gso_encap() is the proto that
will be set in ESP nexthdr. So it should skip all ipv6 nexthdrs and
get the real transport protocol. Othersize, the wrong proto number
will be set into ESP nexthdr.
This patch is to skip all ipv6 nexthdrs by calling ipv6_skip_exthdr()
in esp6_gso_encap().
Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Similar to xfrm6_tunnel/transport_gso_segment(), _gso_segment()
is added to do gso_segment for esp6 beet mode. Before calling
inet6_offloads[proto]->callbacks.gso_segment, it needs to do:
- Get the upper proto from ph header to get its gso_segment
when xo->proto is IPPROTO_BEETPH.
- Add SKB_GSO_TCPV6 to gso_type if x->sel.family != AF_INET6
and the proto == IPPROTO_TCP, so that the current tcp ipv6
packet can be segmented.
- Calculate a right value for skb->transport_header and move
skb->data to the transport header position.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Commit 9b42c1f179a6 ("xfrm: Extend the output_mark") added output_mark
support but missed ESP offload support.
xfrm_smark_get() is not called within xfrm_input() for packets coming
from esp4_gro_receive() or esp6_gro_receive(). Therefore call
xfrm_smark_get() directly within these functions.
Fixes: 9b42c1f179a6 ("xfrm: Extend the output_mark to support input direction and masking.")
Signed-off-by: Ulrich Weber <ulrich.weber@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2019-07-05
1) A lot of work to remove indirections from the xfrm code.
From Florian Westphal.
2) Fix a WARN_ON with ipv6 that triggered because of a
forgotten break statement. From Florian Westphal.
3) Remove xfrmi_init_net, it is not needed.
From Li RongQing.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Only a handful of xfrm_types exist, no need to have 512 pointers for them.
Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms.
Also, the unregister function doesn't need to return an error, no single
caller does anything useful with it.
Just place a WARN_ON() where needed instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 101 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190113.822954939@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Three trivial overlapping conflicts.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This structure is now only 4 bytes, so its more efficient
to cache a copy rather than its address.
No significant size difference in allmodconfig vmlinux.
With non-modular kernel that has all XFRM options enabled, this
series reduces vmlinux image size by ~11kb. All xfrm_mode
indirections are gone and all modes are built-in.
before (ipsec-next master):
text data bss dec filename
21071494 7233140 11104324 39408958 vmlinux.master
after this series:
21066448 7226772 11104324 39397544 vmlinux.patched
With allmodconfig kernel, the size increase is only 362 bytes,
even all the xfrm config options removed in this series are
modular.
before:
text data bss dec filename
15731286 6936912 4046908 26715106 vmlinux.master
after this series:
15731492 6937068 4046908 26715468 vmlinux
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
These functions are small and we only have versions for tunnel
and transport mode for ipv4 and ipv6 respectively.
Just place the 'transport or tunnel' conditional in the protocol
specific function instead of using an indirection.
Before:
3226 12 0 3238 net/ipv4/esp4_offload.o
7004 492 0 7496 net/ipv4/ip_vti.o
3339 12 0 3351 net/ipv6/esp6_offload.o
11294 460 0 11754 net/ipv6/ip6_vti.o
1180 72 0 1252 net/ipv4/xfrm4_mode_beet.o
428 48 0 476 net/ipv4/xfrm4_mode_transport.o
1271 48 0 1319 net/ipv4/xfrm4_mode_tunnel.o
1083 60 0 1143 net/ipv6/xfrm6_mode_beet.o
172 48 0 220 net/ipv6/xfrm6_mode_ro.o
429 48 0 477 net/ipv6/xfrm6_mode_transport.o
1164 48 0 1212 net/ipv6/xfrm6_mode_tunnel.o
15730428 6937008 4046908 26714344 vmlinux
After:
3461 12 0 3473 net/ipv4/esp4_offload.o
7000 492 0 7492 net/ipv4/ip_vti.o
3574 12 0 3586 net/ipv6/esp6_offload.o
11295 460 0 11755 net/ipv6/ip6_vti.o
1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o
171 40 0 211 net/ipv4/xfrm4_mode_transport.o
1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o
1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o
172 40 0 212 net/ipv6/xfrm6_mode_ro.o
172 40 0 212 net/ipv6/xfrm6_mode_transport.o
1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o
15730424 6937008 4046908 26714340 vmlinux
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In esp4_gro_receive() and esp6_gro_receive(), secpath can be allocated
without adding xfrm state to xvec. Then, sp->xvec[sp->len - 1] would
fail and result in dereferencing invalid pointer in esp4_gso_segment()
and esp6_gso_segment(). Reset secpath if xfrm function returns error.
Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Reported-by: syzbot+b69368fd933c6c592f4c@syzkaller.appspotmail.com
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
skb_sec_path gains 'const' qualifier to avoid
xt_policy.c: 'skb_sec_path' discards 'const' qualifier from pointer target type
same reasoning as previous conversions: Won't need to touch these
spots anymore when skb->sp is removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It can only return 0 (success) or -ENOMEM.
Change return value to a pointer to secpath struct.
This avoids direct access to skb->sp:
err = secpath_set(skb);
if (!err) ..
skb->sp-> ...
Becomes:
sp = secpath_set(skb)
if (!sp) ..
sp-> ..
This reduces noise in followup patch which is going to remove skb->sp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2018-07-27
1) Extend the output_mark to also support the input direction
and masking the mark values before applying to the skb.
2) Add a new lookup key for the upcomming xfrm interfaces.
3) Extend the xfrm lookups to match xfrm interface IDs.
4) Add virtual xfrm interfaces. The purpose of these interfaces
is to overcome the design limitations that the existing
VTI devices have.
The main limitations that we see with the current VTI are the
following:
VTI interfaces are L3 tunnels with configurable endpoints.
For xfrm, the tunnel endpoint are already determined by the SA.
So the VTI tunnel endpoints must be either the same as on the
SA or wildcards. In case VTI tunnel endpoints are same as on
the SA, we get a one to one correlation between the SA and
the tunnel. So each SA needs its own tunnel interface.
On the other hand, we can have only one VTI tunnel with
wildcard src/dst tunnel endpoints in the system because the
lookup is based on the tunnel endpoints. The existing tunnel
lookup won't work with multiple tunnels with wildcard
tunnel endpoints. Some usecases require more than on
VTI tunnel of this type, for example if somebody has multiple
namespaces and every namespace requires such a VTI.
VTI needs separate interfaces for IPv4 and IPv6 tunnels.
So when routing to a VTI, we have to know to which address
family this traffic class is going to be encapsulated.
This is a lmitation because it makes routing more complex
and it is not always possible to know what happens behind the
VTI, e.g. when the VTI is move to some namespace.
VTI works just with tunnel mode SAs. We need generic interfaces
that ensures transfomation, regardless of the xfrm mode and
the encapsulated address family.
VTI is configured with a combination GRE keys and xfrm marks.
With this we have to deal with some extra cases in the generic
tunnel lookup because the GRE keys on the VTI are actually
not GRE keys, the GRE keys were just reused for something else.
All extensions to the VTI interfaces would require to add
even more complexity to the generic tunnel lookup.
So to overcome this, we developed xfrm interfaces with the
following design goal:
It should be possible to tunnel IPv4 and IPv6 through the same
interface.
No limitation on xfrm mode (tunnel, transport and beet).
Should be a generic virtual interface that ensures IPsec
transformation, no need to know what happens behind the
interface.
Interfaces should be configured with a new key that must match a
new policy/SA lookup key.
The lookup logic should stay in the xfrm codebase, no need to
change or extend generic routing and tunnel lookups.
Should be possible to use IPsec hardware offloads of the underlying
interface.
5) Remove xfrm pcpu policy cache. This was added after the flowcache
removal, but it turned out to make things even worse.
From Florian Westphal.
6) Allow to update the set mark on SA updates.
From Nathan Harold.
7) Convert some timestamps to time64_t.
From Arnd Bergmann.
8) Don't check the offload_handle in xfrm code,
it is an opaque data cookie for the driver.
From Shannon Nelson.
9) Remove xfrmi interface ID from flowi. After this pach
no generic code is touched anymore to do xfrm interface
lookups. From Benedict Wong.
10) Allow to update the xfrm interface ID on SA updates.
From Nathan Harold.
11) Don't pass zero to ERR_PTR() in xfrm_resolve_and_create_bundle.
From YueHaibing.
12) Return more detailed errors on xfrm interface creation.
From Benedict Wong.
13) Use PTR_ERR_OR_ZERO instead of IS_ERR + PTR_ERR.
From the kbuild test robot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The offload_handle should be an opaque data cookie for the driver
to use, much like the data cookie for a timer or alarm callback.
Thus, the XFRM stack should not be checking for non-zero, because
the driver might use that to store an array reference, which could
be zero, or some other zero but meaningful value.
We can remove the checks for non-zero because there are plenty
other attributes also being checked to see if there is an offload
in place for the SA in question.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Manage pending per-NAPI GRO packets via list_head.
Return an SKB pointer from the GRO receive handlers. When GRO receive
handlers return non-NULL, it means that this SKB needs to be completed
at this time and removed from the NAPI queue.
Several operations are greatly simplified by this transformation,
especially timing out the oldest SKB in the list when gro_count
exceeds MAX_GRO_SKBS, and napi_gro_flush() which walks the queue
in reverse order.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If I understand correctly, we should not be asking for a
checksum offload on an ipsec packet if the netdev isn't
advertising NETIF_F_HW_ESP_TX_CSUM. In that case, we should
clear the NETIF_F_CSUM_MASK bits.
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
en_rx_am.c was deleted in 'net-next' but had a bug fixed in it in
'net'.
The esp{4,6}_offload.c conflicts were overlapping changes.
The 'out' label is removed so we just return ERR_PTR(-EINVAL)
directly.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Validate gso_type during segmentation as SKB_GSO_DODGY sources
may pass packets where the gso_type does not match the contents.
Syzkaller was able to enter the SCTP gso handler with a packet of
gso_type SKB_GSO_TCPV4.
On entry of transport layer gso handlers, verify that the gso_type
matches the transport protocol.
Fixes: 90017accff61 ("sctp: Add GSO support")
Link: http://lkml.kernel.org/r/<001a1137452496ffc305617e5fe0@google.com>
Reported-by: syzbot+fee64147a25aecd48055@syzkaller.appspotmail.com
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Overlapping changes all over.
The mini-qdisc bits were a little bit tricky, however.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The GRO layer does not necessarily pull the complete headers
into the linear part of the skb, a part may remain on the
first page fragment. This can lead to a crash if we try to
pull the headers, so make sure we have them on the linear
part before pulling.
Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Reported-by: syzbot+82bbd65569c49c6c0c4d@syzkaller.appspotmail.com
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
We change the ESP GSO handlers to only segment the packets.
The ESP handling and encryption is defered to validate_xmit_xfrm()
where this is done for non GRO packets too. This makes the code
more robust and prepares for asynchronous crypto handling.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Three cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
esp_output_tail() and esp6_output_tail() can return negative
and positive error values. We currently treat only negative
values as errors, fix this to treat both cases as error.
Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2cc ("esp6: Reorganize esp_output")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
IPSec crypto offload depends on the protocol-specific
offload module (such as esp_offload.ko).
When the user installs an SA with crypto-offload, load
the offload module automatically, in the same way
that the protocol module is loaded (such as esp.ko)
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Keep the device's reported ip_summed indication in case crypto
was offloaded by the device. Subtract the csum values of the
stripped parts (esp header+iv, esp trailer+auth_data) to keep
value correct.
Note: CHECKSUM_COMPLETE should be indicated only if skb->csum
has the post-decryption offload csum value.
Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
IP6CB(skb)->nhoff is the offset of the nexthdr field in an IPv6
header, unless there are extension headers present, in which case
nhoff points to the nexthdr field of the last extension header.
In non-GRO code path, nhoff is set by ipv6_rcv before any XFRM code
is executed. Conversely, in GRO code path (when esp6_offload is loaded),
nhoff is not set. The following functions fail to read the correct value
and eventually the packet is dropped:
xfrm6_transport_finish
xfrm6_tunnel_input
xfrm6_rcv_tnl
Set nhoff to the proper offset of nexthdr in esp6_gro_receive.
Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If esp*_offload module is loaded, outbound packets take the
GSO code path, being encapsulated at layer 3, but encrypted
in layer 2. validate_xmit_xfrm calls esp*_xmit for that.
esp*_xmit was wrongfully detecting these packets as going
through hardware crypto offload, while in fact they should
be encrypted in software, causing plaintext leakage to
the network, and also dropping at the receiver side.
Perform the encryption in esp*_xmit, if the SA doesn't have
a hardware offload_handle.
Also, align esp6 code to esp4 logic.
Fixes: fca11ebde3f0 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2cc ("esp6: Reorganize esp_output")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
