summaryrefslogtreecommitdiff
path: root/net/wireless/util.c
AgeCommit message (Collapse)Author
2024-03-04wifi: cfg80211: check A-MSDU format more carefullyJohannes Berg
If it looks like there's another subframe in the A-MSDU but the header isn't fully there, we can end up reading data out of bounds, only to discard later. Make this a bit more careful and check if the subframe header can even be present. Reported-by: syzbot+d050d437fe47d479d210@syzkaller.appspotmail.com Link: https://msgid.link/20240226203405.a731e2c95e38.I82ce7d8c0cc8970ce29d0a39fdc07f1ffc425be4@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-08wifi: cfg80211: Add utility for converting op_class into chandefMichael-CY Lee
This utility is used in STA CSA handling. The op_class in the ECSA Element can be converted into chandef. Co-developed-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Link: https://msgid.link/20231222010914.6521-2-michael-cy.lee@mediatek.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-01-03wifi: cfg80211: Update the default DSCP-to-UP mappingIlan Peer
The default DSCP-to-UP mapping method defined in RFC8325 applied to packets marked per recommendations in RFC4594 and destined to 802.11 WLAN clients will yield a number of inconsistent QoS mappings. To handle this, modify the mapping of specific DSCP values for which the default mapping will create inconsistencies, based on the recommendations in section 4 in RFC8325. Note: RFC8235 is used as it referenced by both IEEE802.11Revme_D4.0 and WFA QoS Management Specification. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://msgid.link/20231218093005.3064013-1-ilan.peer@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: cfg80211: Allow AP/P2PGO to indicate port authorization to peer ↵Vinayak Yadawad
STA/P2PClient In 4way handshake offload, cfg80211_port_authorized enables driver to indicate successful 4way handshake to cfg80211 layer. Currently this path of port authorization is restricted to interface type NL80211_IFTYPE_STATION and NL80211_IFTYPE_P2P_CLIENT. This patch extends the support for NL80211_IFTYPE_AP and NL80211_IFTYPE_P2P_GO interfaces to authorize peer STA/P2P_CLIENT, whenever authentication is offloaded on the AP/P2P_GO interface. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Link: https://lore.kernel.org/r/dee3b0a2b4f617e932c90bff4504a89389273632.1695721435.git.vinayak.yadawad@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-10-23wifi: cfg80211: Include operating class 137 in 6GHz bandIlan Peer
Draft P802.11be_D3.1 added operating class to describe 320 MHz operation in the 6GHz band. Include this new operating class in ieee80211_operating_class_to_band(). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230928172905.bed4a007d81b.I3eb4b8fe39c0c1a988c98a103b11a9f45a92b038@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-13wifi: cfg80211: remove scan_width supportJohannes Berg
There really isn't any support for scanning at different channel widths than 20 MHz since there's no way to set it. Remove this support for now, if somebody wants to maintain this whole thing later we can revisit how it should work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: add ieee80211_fragment_element to public APIBenjamin Berg
This function will be used by the kunit tests within cfg80211. As it is generally useful, move it from mac80211 to cfg80211. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230827135854.5af9391659f5.Ie534ed6591ba02be8572d4d7242394f29e3af04b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-11wifi: cfg80211: remove wdev mutexJohannes Berg
Since we're now protecting everything with the wiphy mutex (and were really using it for almost everything before), there's no longer any real reason to have a separate wdev mutex. It may feel better, but really has no value. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-07-12wifi: cfg80211: fix receiving mesh packets without RFC1042 headerFelix Fietkau
Fix ethernet header length field after stripping the mesh header Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/CT5GNZSK28AI.2K6M69OXM9RW5@syracuse/ Fixes: 986e43b19ae9 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Reported-and-tested-by: Nicolas Escande <nico.escande@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230711115052.68430-1-nbd@nbd.name Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-19Merge wireless into wireless-nextJohannes Berg
There are some locking changes that will later otherwise cause conflicts, so merge wireless into wireless-next to avoid those. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-14wifi: cfg80211: S1G rate information and calculationsGilad Itzkovitch
Increase the size of S1G rate_info flags to support S1G and add flags for new S1G MCS and the supported bandwidths. Also, include S1G rate information to netlink STA rate message. Lastly, add rate calculation function for S1G MCS. Signed-off-by: Gilad Itzkovitch <gilad.itzkovitch@morsemicro.com> Link: https://lore.kernel.org/r/20230518000723.991912-1-gilad.itzkovitch@morsemicro.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-06-09wifi: cfg80211: remove links only on APJohannes Berg
Since links are only controlled by userspace via cfg80211 in AP mode, also only remove them from the driver in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230608163202.ed65b94916fa.I2458c46888284cc5ce30715fe642bc5fc4340c8f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-22wifi: mac80211: implement support for yet another mesh A-MSDU formatFelix Fietkau
MT7996 hardware supports mesh A-MSDU subframes in hardware, but uses a big-endian length field Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/20230314095956.62085-7-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDUFelix Fietkau
At least ath10k and ath11k supported hardware (maybe more) does not implement mesh A-MSDU aggregation in a standard compliant way. 802.11-2020 9.3.2.2.2 declares that the Mesh Control field is part of the A-MSDU header (and little-endian). As such, its length must not be included in the subframe length field. Hardware affected by this bug treats the mesh control field as part of the MSDU data and sets the length accordingly. In order to avoid packet loss, keep track of which stations are affected by this and take it into account when converting A-MSDU to 802.3 + mesh control packets. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-5-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: mac80211: fix receiving A-MSDU frames on mesh interfacesFelix Fietkau
The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets on mesh interfaces, because it assumes that the Mesh Control field is always directly after the 802.11 header. 802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is actually part of the A-MSDU subframe header. This makes more sense, since it allows packets for multiple different destinations to be included in the same A-MSDU, as long as RA and TID are still the same. Another issue is the fact that the A-MSDU subframe length field was apparently accidentally defined as little-endian in the standard. In order to fix this, the mesh forwarding path needs happen at a different point in the receive path. ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field and leave it in after the ethernet header. This also affects the source/dest MAC address fields, which now in the case of mesh point to the mesh SA/DA. ieee80211_amsdu_to_8023s is changed to deal with the endian difference and to add the Mesh Control length to the subframe length, since it's not covered by the MSDU length field. With these changes, the mac80211 will get the same packet structure for converted regular data packets and unpacked A-MSDU subframes. The mesh forwarding checks are now only performed after the A-MSDU decap. For locally received packets, the Mesh Control header is stripped away. For forwarded packets, a new 802.11 header gets added. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name [fix fortify build error] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: factor out bridge tunnel / RFC1042 header checkFelix Fietkau
The same check is done in multiple places, unify it. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-2-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-02-14wifi: cfg80211: move A-MSDU check in ieee80211_data_to_8023_exthdrFelix Fietkau
When parsing the outer A-MSDU header, don't check for inner bridge tunnel or RFC1042 headers. This is handled by ieee80211_amsdu_to_8023s already. Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230213100855.34315-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-01-18wifi: cfg80211: remove support for static WEPJohannes Berg
This reverts commit b8676221f00d ("cfg80211: Add support for static WEP in the driver") since no driver ever ended up using it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
drivers/net/can/pch_can.c ae64438be192 ("can: dev: fix skb drop check") 1dd1b521be85 ("can: remove obsolete PCH CAN driver") https://lore.kernel.org/all/20221110102509.1f7d63cc@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-21wifi: cfg80211: Fix bitrates overflow issuePaul Zhang
When invoking function cfg80211_calculate_bitrate_eht about (320 MHz, EHT-MCS 13, EHT-NSS 2, EHT-GI 0), which means the parameters as flags: 0x80, bw: 7, mcs: 13, eht_gi: 0, nss: 2, this formula (result * rate->nss) will overflow and causes the returned bitrate to be 3959 when it should be 57646. Here is the explanation: u64 tmp; u32 result; … /* tmp = result = 4 * rates_996[0] * = 4 * 480388888 = 0x72889c60 */ tmp = result; /* tmp = 0x72889c60 * 6144 = 0xabccea90000 */ tmp *= SCALE; /* tmp = 0xabccea90000 / mcs_divisors[13] * = 0xabccea90000 / 5120 = 0x8970bba6 */ do_div(tmp, mcs_divisors[rate->mcs]); /* result = 0x8970bba6 */ result = tmp; /* normally (result * rate->nss) = 0x8970bba6 * 2 = 0x112e1774c, * but since result is u32, (result * rate->nss) = 0x12e1774c, * overflow happens and it loses the highest bit. * Then result = 0x12e1774c / 8 = 39595753, */ result = (result * rate->nss) / 8; Signed-off-by: Paul Zhang <quic_paulz@quicinc.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-10Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg
Pull in wireless/main content since some new code would otherwise conflict with it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07cfg80211: Update Transition Disable policy during port authorizationVinayak Yadawad
In case of 4way handshake offload, transition disable policy updated by the AP during EAPOL 3/4 is not updated to the upper layer. This results in mismatch between transition disable policy between the upper layer and the driver. This patch addresses this issue by updating transition disable policy as part of port authorization indication. Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-10-07wifi: cfg80211: fix ieee80211_data_to_8023_exthdr handling of small packetsFelix Fietkau
STP topology change notification packets only have a payload of 7 bytes, so they get dropped due to the skb->len < hdrlen + 8 check. Fix this by removing the extra 8 from the skb->len check and checking the return code on the skb_copy_bits calls. Fixes: 2d1c304cb2d5 ("cfg80211: add function for 802.3 conversion with separate output buffer") Reported-by: Chad Monroe <chad.monroe@smartrg.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-27wifi: cfg80211: fix MCS divisor valueTamizh Chelvam Raja
The Bitrate for HE/EHT MCS6 is calculated wrongly due to the incorrect MCS divisor value for mcs6. Fix it with the proper value. previous mcs_divisor value = (11769/6144) = 1.915527 fixed mcs_divisor value = (11377/6144) = 1.851725 Fixes: 9c97c88d2f4b ("cfg80211: Add support to calculate and report 4096-QAM HE rates") Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Link: https://lore.kernel.org/r/20220908181034.9936-1-quic_tamizhr@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-08-25wifi: cfg80211: Add link_id parameter to various key operations for MLOVeerendranath Jakkam
Add support for various key operations on MLD by adding new parameter link_id. Pass the link_id received from userspace to driver for add_key, get_key, del_key, set_default_key, set_default_mgmt_key and set_default_beacon_key to support configuring keys specific to each MLO link. Userspace must not specify link ID for MLO pairwise key since it is common for all the MLO links. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/20220730052643.1959111-4-quic_vjakkam@quicinc.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: add cfg80211_get_iftype_ext_capa()Johannes Berg
Add a helper function cfg80211_get_iftype_ext_capa() to look up interface type-specific (extended) capabilities. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-15wifi: cfg80211: clean up links appropriatelyJohannes Berg
This was missing earlier, we need to remove links when interfaces are being destroyed, and we also need to stop (AP) operations when a link is being destroyed. Address these issues to remove many warnings that will otherwise appear in mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-06-20wifi: cfg80211: do some rework towards MLO link APIsJohannes Berg
In order to support multi-link operation with multiple links, start adding some APIs. The notable addition here is to have the link ID in a new nl80211 attribute, that will be used to differentiate the links in many nl80211 operations. So far, this patch adds the netlink NL80211_ATTR_MLO_LINK_ID attribute (as well as the NL80211_ATTR_MLO_LINKS attribute) and plugs it through the system in some places, checking the validity etc. along with other infrastructure needed for it. For now, I've decided to include only the over-the-air link ID in the API. I know we discussed that we eventually need to have to have other ways of identifying a link, but for local AP mode and auth/assoc commands as well as set_key etc. we'll use the OTA ID. Also included in this patch is some refactoring of the data structures in struct wireless_dev, splitting for the first time the data into type dependent pieces, to make reasoning about these things easier. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-03-11Merge tag 'wireless-next-2022-03-11' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== brcmfmac * add BCM43454/6 support rtw89 * add support for 160 MHz channels and 6 GHz band * hardware scan support iwlwifi * support UHB TAS enablement via BIOS * remove a bunch of W=1 warnings * add support for channel switch offload * support 32 Rx AMPDU sessions in newer devices * add support for a couple of new devices * add support for band disablement via BIOS mt76 * mt7915 thermal management improvements * SAR support for more mt76 drivers * mt7986 wmac support on mt7915 ath11k * debugfs interface to configure firmware debug log level * debugfs interface to test Target Wake Time (TWT) * provide 802.11ax High Efficiency (HE) data via radiotap ath9k * use hw_random API instead of directly dumping into random.c wcn36xx * fix wcn3660 to work on 5 GHz band ath6kl * add device ID for WLU5150-D81 cfg80211/mac80211 * initial EHT (from 802.11be) support (EHT rates, 320 MHz, larger block-ack) * support disconnect on HW restart * tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits) mac80211: Add support to trigger sta disconnect on hardware restart mac80211: fix potential double free on mesh join mac80211: correct legacy rates check in ieee80211_calc_rx_airtime nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE rtw89: 8852c: process logic efuse map rtw89: 8852c: process efuse of phycap rtw89: support DAV efuse reading operation rtw89: 8852c: add chip::dle_mem rtw89: add page_regs to handle v1 chips rtw89: add chip_info::{h2c,c2h}_reg to support more chips rtw89: add hci_func_en_addr to support variant generation rtw89: add power_{on/off}_func rtw89: read chip version depends on chip ID rtw89: pci: use a struct to describe all registers address related to DMA channel rtw89: pci: add V1 of PCI channel address rtw89: pci: add struct rtw89_pci_info rtw89: 8852c: add 8852c empty files MAINTAINERS: add devicetree bindings entry for mt76 ... ==================== Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-06wireless: Use netif_rx().Sebastian Andrzej Siewior
Since commit baebdf48c3600 ("net: dev: Makes sure netif_rx() can be invoked in any context.") the function netif_rx() can be used in preemptible/thread context as well as in interrupt context. Use netif_rx(). Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-16nl80211: add EHT MCS supportVeerendranath Jakkam
Add support for reporting and calculating EHT bitrates. Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com> Link: https://lore.kernel.org/r/1640163883-12696-7-git-send-email-quic_vjakkam@quicinc.com Link: https://lore.kernel.org/r/20220214163009.175289-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-02-04cfg80211/mac80211: assume CHECKSUM_COMPLETE includes SNAPJohannes Berg
There's currently only one driver that reports CHECKSUM_COMPLETE, that is iwlwifi. The current hardware there calculates checksum after the SNAP header, but only RFC 1042 (and some other cases, but replicating the exact hardware logic for corner cases in the driver seemed awkward.) Newer generations of hardware will checksum _including_ the SNAP, which makes things easier. To handle that, simply always assume the checksum _includes_ the SNAP header, which this patch does, requiring to first add it for older iwlwifi hardware, and then remove it again later on conversion. Alternatively, we could have: 1) Always assumed the checksum starts _after_ the SNAP header; the problem with this is that we'd have to replace the exact "what is the SNAP" check in iwlwifi that cfg80211 has. 2) Made it configurable with some flag, but that seemed like too much complexity. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220202104617.230736e19e0e.I3e6745873585ad943c152fab9e23b5221f17a95f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-11-15cfg80211: call cfg80211_stop_ap when switch from P2P_GO typeNguyen Dinh Phi
If the userspace tools switch from NL80211_IFTYPE_P2P_GO to NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), it does not call the cleanup cfg80211_stop_ap(), this leads to the initialization of in-use data. For example, this path re-init the sdata->assigned_chanctx_list while it is still an element of assigned_vifs list, and makes that linked list corrupt. Signed-off-by: Nguyen Dinh Phi <phind.uet@gmail.com> Reported-by: syzbot+bbf402b783eeb6d908db@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20211027173722.777287-1-phind.uet@gmail.com Cc: stable@vger.kernel.org Fixes: ac800140c20e ("cfg80211: .stop_ap when interface is going down") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-25cfg80211: correct bridge/4addr mode checkJanusz Dziedzic
Without the patch we fail: $ sudo brctl addbr br0 $ sudo brctl addif br0 wlp1s0 $ sudo iw wlp1s0 set 4addr on command failed: Device or resource busy (-16) Last command failed but iface was already in 4addr mode. Fixes: ad4bb6f8883a ("cfg80211: disallow bridging managed/adhoc interfaces") Signed-off-by: Janusz Dziedzic <janusz.dziedzic@gmail.com> Link: https://lore.kernel.org/r/20211024201546.614379-1-janusz.dziedzic@gmail.com [add fixes tag, fix indentation, edit commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-10-21nl80211: Add LC placeholder band definition to nl80211_bandSrinivasan Raju
Define LC band which is a draft under IEEE 802.11bb. Current NL80211_BAND_LC is a placeholder band and will be more defined IEEE 802.11bb progresses. Signed-off-by: Srinivasan Raju <srini.raju@purelifi.com> Link: https://lore.kernel.org/r/20211018100143.7565-2-srini.raju@purelifi.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-31cfg80211: call cfg80211_leave_ocb when switching away from OCBDu Cheng
If the userland switches back-and-forth between NL80211_IFTYPE_OCB and NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), there is a chance where the cleanup cfg80211_leave_ocb() is not called. This leads to initialization of in-use memory (e.g. init u.ibss while in-use by u.ocb) due to a shared struct/union within ieee80211_sub_if_data: struct ieee80211_sub_if_data { ... union { struct ieee80211_if_ap ap; struct ieee80211_if_vlan vlan; struct ieee80211_if_managed mgd; struct ieee80211_if_ibss ibss; // <- shares address struct ieee80211_if_mesh mesh; struct ieee80211_if_ocb ocb; // <- shares address struct ieee80211_if_mntr mntr; struct ieee80211_if_nan nan; } u; ... } Therefore add handling of otype == NL80211_IFTYPE_OCB, during cfg80211_change_iface() to perform cleanup when leaving OCB mode. link to syzkaller bug: https://syzkaller.appspot.com/bug?id=0612dbfa595bf4b9b680ff7b4948257b8e3732d5 Reported-by: syzbot+105896fac213f26056f9@syzkaller.appspotmail.com Signed-off-by: Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210428063941.105161-1-ducheng2@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-11cfg80211: mitigate A-MSDU aggregation attacksMathy Vanhoef
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP) header, and if so dropping the complete A-MSDU frame. This mitigates known attacks, although new (unknown) aggregation-based attacks may remain possible. This defense works because in A-MSDU aggregation injection attacks, a normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042 header. In other words, the destination MAC address of the first A-MSDU subframe contains the start of an RFC1042 header during an aggregation attack. We can detect this and thereby prevent this specific attack. For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi Through Frame Aggregation and Fragmentation". Note that for kernel 4.9 and above this patch depends on "mac80211: properly handle A-MSDUs that start with a rfc1042 header". Otherwise this patch has no impact and attacks will remain possible. Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-05-11mac80211: properly handle A-MSDUs that start with an RFC 1042 headerMathy Vanhoef
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042 header. This can occur in practice when the destination MAC address equals AA:AA:03:00:00:00. More importantly, this simplifies the next patch to mitigate A-MSDU injection attacks. Cc: stable@vger.kernel.org Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be> Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-04-19cfg80211: constify ieee80211_get_response_rate returnJoe Perches
It's not modified so make it const with the eventual goal of moving data to text for various static struct ieee80211_rate arrays. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/8b210b5f5972e39eded269b35a1297cf824c4181.camel@perches.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-26cfg80211: avoid holding the RTNL when calling the driverJohannes Berg
Currently, _everything_ in cfg80211 holds the RTNL, and if you have a slow USB device (or a few) you can get some bad lock contention on that. Fix that by re-adding a mutex to each wiphy/rdev as we had at some point, so we have locking for the wireless_dev lists and all the other things in there, and also so that drivers still don't have to worry too much about it (they still won't get parallel calls for a single device). Then, we can restrict the RTNL to a few cases where we add or remove interfaces and really need the added protection. Some of the global list management still also uses the RTNL, since we need to have it anyway for netdev management, but we only hold the RTNL for very short periods of time here. Link: https://lore.kernel.org/r/20210122161942.81df9f5e047a.I4a8e1a60b18863ea8c5e6d3a0faeafb2d45b2f40@changeid Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> [marvell driver issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: Add phyrate conversion support for extended MCS in 60GHz bandMax Chen
The current phyrate conversion does not include extended MCS and provides incorrect rates. Add a flag for extended MCS in DMG and add corresponding phyrate table for the correct conversions using base MCS in DMG specs. Signed-off-by: Max Chen <mxchen@codeaurora.org> Link: https://lore.kernel.org/r/1609977050-7089-2-git-send-email-mxchen@codeaurora.org [reduce data size, make a single WARN] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-01-22cfg80211: add VHT rate entries for MCS-10 and MCS-11Arend van Spriel
Observed the warning in cfg80211_calculate_bitrate_vht() using an 11ac chip reporting MCS-11. Since devices reporting non-standard MCS-9 is already supported add similar entries for MCS-10 and MCS-11. Actually, the value of MCS-9@20MHz is slightly off so corrected that. Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/20210105105839.3795-1-arend.vanspriel@broadcom.com [fix array size] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11nl80211: validate key indexes for cfg80211_registered_deviceAnant Thazhemadam
syzbot discovered a bug in which an OOB access was being made because an unsuitable key_idx value was wrongly considered to be acceptable while deleting a key in nl80211_del_key(). Since we don't know the cipher at the time of deletion, if cfg80211_validate_key_settings() were to be called directly in nl80211_del_key(), even valid keys would be wrongly determined invalid, and deletion wouldn't occur correctly. For this reason, a new function - cfg80211_valid_key_idx(), has been created, to determine if the key_idx value provided is valid or not. cfg80211_valid_key_idx() is directly called in 2 places - nl80211_del_key(), and cfg80211_validate_key_settings(). Reported-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Tested-by: syzbot+49d4cab497c2142ee170@syzkaller.appspotmail.com Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201204215825.129879-1-anant.thazhemadam@gmail.com Cc: stable@vger.kernel.org [also disallow IGTK key IDs if no IGTK cipher is supported] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-12-11cfg80211: Fix fall-through warnings for ClangGustavo A. R. Silva
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ed94a115106fa9c6df94d09b2a6c5791c618c4f2.1605896059.git.gustavoars@kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-11cfg80211: remove WDS codeJohannes Berg
Remove all the code that was there to configure WDS interfaces, now that there's no way to reach it anymore. Link: https://lore.kernel.org/r/20201109105103.8f5b98e4068d.I5f5129041649ef2862b69683574bb3344743727b@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-11-06cfg80211: Add support to calculate and report 4096-QAM HE ratesVamsi Krishna
Drivers supporting 4096-QAM rates as a vendor extension in HE mode need to update the correct rate info to userspace while using 4096-QAM (MCS12 and MCS13) in HE mode. Add support to calculate bitrates of HE-MCS12 and HE-MCS13 which represent the 4096-QAM modulation schemes. The MCS12 and MCS13 bitrates are defined in IEEE P802.11be/D0.1. In addition, scale up the bitrates by 3*2048 in order to accommodate calculations for the new MCS12 and MCS13 rates without losing fraction values. Signed-off-by: Vamsi Krishna <vamsin@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Link: https://lore.kernel.org/r/20201029183457.7005-1-jouni@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-18nl80211: support setting S1G channelsThomas Pedersen
S1G channels have a single width defined per frequency, so derive it from the channel flags with ieee80211_s1g_channel_width(). Also support setting an S1G channel where control frequency may differ from operating, and add some basic validation to ensure the control channel is with the operating. Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com> Link: https://lore.kernel.org/r/20200908190323.15814-6-thomas@adapt-ip.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit (git 2.34.1) at 2024-05-22 09:30:03 +0000