| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2ee ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939a5 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a27c ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
High-level copy_to_user_* APIs already redact SA secret fields when
redaction is enabled, but the state teardown path still freed aead,
aalg and ealg structs with plain kfree(), which does not clear memory
before deallocation. This can leave SA keys and other confidential
data in memory, risking exposure via post-free vulnerabilities.
Since this path is outside the packet fast path, the cost of zeroization
is acceptable and prevents any residual key material. This patch
replaces those kfree() calls unconditionally with kfree_sensitive(),
which zeroizes the entire buffer before freeing.
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
nat_keepalive_sk_ipv[46] is a per-CPU variable and relies on disabled BH
for its locking. Without per-CPU locking in local_bh_disable() on
PREEMPT_RT this data structure requires explicit locking.
Use sock_bh_locked which has a sock pointer and a local_lock_t. Use
local_lock_nested_bh() for locking. This change adds only lockdep
coverage and does not alter the functional behaviour for !PREEMPT_RT.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250512092736.229935-7-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Both packet and crypto offloads perform decryption while packet is
arriving to the HW from the wire. It means that there is no possible
way to perform lookup on XFRM if_id as it can't be set to be "before' HW.
So instead of silently ignore this configuration, let's warn users about
misconfiguration.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Users can set any seq/seq_hi/oseq/oseq_hi values. The XFRM core code
doesn't prevent from them to set even 0xFFFFFFFF, however this value
will cause for traffic drop.
Is is happening because SEQ numbers here mean that packet with such
number was processed and next number should be sent on the wire. In this
case, the next number will be 0, and it means overflow which causes to
(expected) packet drops.
While it can be considered as misconfiguration and handled by XFRM
datapath in the same manner as any other SEQ number, let's add
validation to easy for packet offloads implementations which need to
configure HW with next SEQ to send and not with current SEQ like it is
done in core code.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Prior to this patch, the mark is sanitized (applying the state's mask to
the state's value) only on inserts when checking if a conflicting XFRM
state or policy exists.
We discovered in Cilium that this same sanitization does not occur
in the hot-path __xfrm_state_lookup. In the hot-path, the sk_buff's mark
is simply compared to the state's value:
if ((mark & x->mark.m) != x->mark.v)
continue;
Therefore, users can define unsanitized marks (ex. 0xf42/0xf00) which will
never match any packet.
This commit updates __xfrm_state_insert and xfrm_policy_insert to store
the sanitized marks, thus removing this footgun.
This has the side effect of changing the ip output, as the
returned mark will have the mask applied to it when printed.
Fixes: 3d6acfa7641f ("xfrm: SA lookups with mark")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Co-developed-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
ipcomp_post_acomp currently drops all frags (via pskb_trim_unique(skb,
0)), and then subtracts the old skb->data_len from truesize. This
adjustment has already be done during trimming (in skb_condense), so
we don't need to do it again.
This shows up for example when running fragmented traffic over ipcomp,
we end up hitting the WARN_ON_ONCE in skb_try_coalesce.
Fixes: eb2953d26971 ("xfrm: ipcomp: Use crypto_acomp interface")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Previously, migration related setup, such as updating family,
destination address, and source address, was performed after
the clone was created in `xfrm_state_migrate`. This change
moves this setup into the cloning function itself, improving
code locality and reducing redundancy.
The `xfrm_state_clone_and_setup` function now conditionally
applies the migration parameters from struct xfrm_migrate
if it is provided. This allows the function to be used both
for simple cloning and for cloning with migration setup.
Test: Tested with kernel test in the Android tree located
in https://android.googlesource.com/kernel/tests/
The xfrm_tunnel_test.py under the tests folder in
particular.
Signed-off-by: Chiachang Wang <chiachangwang@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add hardware offload configuration to XFRM_MSG_MIGRATE
using an option netlink attribute XFRMA_OFFLOAD_DEV.
In the existing xfrm_state_migrate(), the xfrm_init_state()
is called assuming no hardware offload by default. Even the
original xfrm_state is configured with offload, the setting will
be reset. If the device is configured with hardware offload,
it's reasonable to allow the device to maintain its hardware
offload mode. But the device will end up with offload disabled
after receiving a migration event when the device migrates the
connection from one netdev to another one.
The devices that support migration may work with different
underlying networks, such as mobile devices. The hardware setting
should be forwarded to the different netdev based on the
migration configuration. This change provides the capability
for user space to migrate from one netdev to another.
Test: Tested with kernel test in the Android tree located
in https://android.googlesource.com/kernel/tests/
The xfrm_tunnel_test.py under the tests folder in
particular.
Signed-off-by: Chiachang Wang <chiachangwang@google.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Previously, device driver IPSec offload implementations would fall into
two categories:
1. Those that used xso.dev to determine the offload device.
2. Those that used xso.real_dev to determine the offload device.
The first category didn't work with bonding while the second did.
In a non-bonding setup the two pointers are the same.
This commit adds explicit pointers for the offload netdevice to
.xdo_dev_state_add() / .xdo_dev_state_delete() / .xdo_dev_state_free()
which eliminates the confusion and allows drivers from the first
category to work with bonding.
xso.real_dev now becomes a private pointer managed by the bonding
driver.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
validate_xmit_xfrm checks whether a packet already passed through it on
the master device (xso.dev) and skips processing the skb again on the
slave device (xso.real_dev).
This check was added in commit [1] to avoid tx packets on a bond device
pass through xfrm twice and get two sets of headers, but the check was
soon obsoleted by commit [2], which was added around the same time to
fix a similar but unrelated problem. Commit [3] set XFRM_XMIT only when
packets are hw offloaded.
xso.dev is usually equal to xso.real_dev, unless bonding is used, in
which case the bonding driver uses xso.real_dev to manage offloaded xfrm
states.
Since commit [3], the check added in commit [1] is unused on all cases,
since packets going through validate_xmit_xfrm twice bail out on the
check added in commit [2]. Here's a breakdown of relevant scenarios:
1. ESP offload off: validate_xmit_xfrm returns early on !xo.
2. ESP offload on, no bond: skb->dev == xso.real_dev == xso.dev.
3. ESP offload on, bond, xs on bond dev: 1st pass adds XFRM_XMIT, 2nd
pass returns early on XFRM_XMIT.
3. ESP offload on, bond, xs on slave dev: 1st pass returns early on
!xo, 2nd pass adds XFRM_XMIT.
4. ESP offload on, bond, xs on both bond AND slave dev: only 1 offload
possible in secpath. Either 1st pass adds XFRM_XMIT and 2nd pass returns
early on XFRM_XMIT, or 1st pass is sw and returns early on !xo.
6. ESP offload on, crypto fallback triggered in esp_xmit/esp6_xmit: 1st
pass does sw crypto & secpath_reset, 2nd pass returns on !xo.
This commit removes the unnecessary check, so xso.real_dev becomes what
it is in practice: a private field managed by bonding driver.
The check immediately below that can be simplified as well.
[1] commit 272c2330adc9 ("xfrm: bail early on slave pass over skb")
[2] commit 94579ac3f6d0 ("xfrm: Fix double ESP trailer insertion in
IPsec crypto offload.")
[3] commit c7dbf4c08868 ("xfrm: Provide private skb extensions for
segmented and hw offloaded ESP packets")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
The policy offload struct was reused from the state offload and
real_dev was copied from dev, but it was never set to anything else.
Simplify the code by always using xdo.dev for policies.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrmi_exit_batch_rtnl() iterates the dying netns list and
performs the same operations for each.
Let's use ->exit_rtnl().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20250411205258.63164-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
A few error paths are missing a kfree_skb.
Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
If the destination buffer has a fixed length, strscpy_pad()
automatically determines its size using sizeof() when the argument is
omitted. This makes the explicit sizeof() calls unnecessary - remove
them.
No functional changes intended.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove legacy compression interface
- Improve scatterwalk API
- Add request chaining to ahash and acomp
- Add virtual address support to ahash and acomp
- Add folio support to acomp
- Remove NULL dst support from acomp
Algorithms:
- Library options are fuly hidden (selected by kernel users only)
- Add Kerberos5 algorithms
- Add VAES-based ctr(aes) on x86
- Ensure LZO respects output buffer length on compression
- Remove obsolete SIMD fallback code path from arm/ghash-ce
Drivers:
- Add support for PCI device 0x1134 in ccp
- Add support for rk3588's standalone TRNG in rockchip
- Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93
- Fix bugs in tegra uncovered by multi-threaded self-test
- Fix corner cases in hisilicon/sec2
Others:
- Add SG_MITER_LOCAL to sg miter
- Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp"
* tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits)
crypto: testmgr - Add multibuffer acomp testing
crypto: acomp - Fix synchronous acomp chaining fallback
crypto: testmgr - Add multibuffer hash testing
crypto: hash - Fix synchronous ahash chaining fallback
crypto: arm/ghash-ce - Remove SIMD fallback code path
crypto: essiv - Replace memcpy() + NUL-termination with strscpy()
crypto: api - Call crypto_alg_put in crypto_unregister_alg
crypto: scompress - Fix incorrect stream freeing
crypto: lib/chacha - remove unused arch-specific init support
crypto: remove obsolete 'comp' compression API
crypto: compress_null - drop obsolete 'comp' implementation
crypto: cavium/zip - drop obsolete 'comp' implementation
crypto: zstd - drop obsolete 'comp' implementation
crypto: lzo - drop obsolete 'comp' implementation
crypto: lzo-rle - drop obsolete 'comp' implementation
crypto: lz4hc - drop obsolete 'comp' implementation
crypto: lz4 - drop obsolete 'comp' implementation
crypto: deflate - drop obsolete 'comp' implementation
crypto: 842 - drop obsolete 'comp' implementation
crypto: nx - Migrate to scomp API
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2025-03-24
1) Prevent setting high order sequence number bits input in
non-ESN mode. From Leon Romanovsky.
2) Support PMTU handling in tunnel mode for packet offload.
From Leon Romanovsky.
3) Make xfrm_state_lookup_byaddr lockless.
From Florian Westphal.
4) Remove unnecessary NULL check in xfrm_lookup_with_ifid().
From Dan Carpenter.
* tag 'ipsec-next-2025-03-24' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: Remove unnecessary NULL check in xfrm_lookup_with_ifid()
xfrm: state: make xfrm_state_lookup_byaddr lockless
xfrm: check for PMTU in tunnel mode for packet offload
xfrm: provide common xdo_dev_offload_ok callback implementation
xfrm: rely on XFRM offload
xfrm: simplify SA initialization routine
xfrm: delay initialization of offload path till its actually requested
xfrm: prevent high SEQ input in non-ESN mode
====================
Link: https://patch.msgid.link/20250324061855.4116819-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the legacy comperssion interface with the new acomp
interface. This is the first user to make full user of the
asynchronous nature of acomp by plugging into the existing xfrm
resume interface.
As a result of SG support by acomp, the linear scratch buffer
in ipcomp can be removed.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If a malformed packet is received there may not be enough data
to pull. This isn't a problem in practice because the caller
has already done xfrm_parse_spi which in effect does the same
thing.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad761 ("selftest: net: add proc_net_pktgen")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711acb8 ("selftests: net: Add test cases for link and peer netns")
3ed61b8938c6 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429ec2 ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d5a ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This NULL check is unnecessary and can be removed. It confuses
Smatch static analysis tool because it makes Smatch think that
xfrm_lookup_with_ifid() can return a mix of NULL pointers and errors so
it creates a lot of false positives. Remove it.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
This appears to be an oversight back when the state lookup
was converted to RCU, I see no reason why we need to hold the
state lock here.
__xfrm_state_lookup_byaddr already uses xfrm_state_hold_rcu
helper to obtain a reference, so just replace the state
lock with rcu.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
When link_net is set, use it as link netns instead of dev_net(). This
prepares for rtnetlink core to create device in target netns directly,
in which case the two namespaces may be different.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-10-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are 4 net namespaces involved when creating links:
- source netns - where the netlink socket resides,
- target netns - where to put the device being created,
- link netns - netns associated with the device (backend),
- peer netns - netns of peer device.
Currently, two nets are passed to newlink() callback - "src_net"
parameter and "dev_net" (implicitly in net_device). They are set as
follows, depending on netlink attributes in the request.
+------------+-------------------+---------+---------+
| peer netns | IFLA_LINK_NETNSID | src_net | dev_net |
+------------+-------------------+---------+---------+
| | absent | source | target |
| absent +-------------------+---------+---------+
| | present | link | link |
+------------+-------------------+---------+---------+
| | absent | peer | target |
| present +-------------------+---------+---------+
| | present | peer | link |
+------------+-------------------+---------+---------+
When IFLA_LINK_NETNSID is present, the device is created in link netns
first and then moved to target netns. This has some side effects,
including extra ifindex allocation, ifname validation and link events.
These could be avoided if we create it in target netns from
the beginning.
On the other hand, the meaning of src_net parameter is ambiguous. It
varies depending on how parameters are passed. It is the effective
link (or peer netns) by design, but some drivers ignore it and use
dev_net instead.
To provide more netns context for drivers, this patch packs existing
newlink() parameters, along with the source netns, link netns and peer
netns, into a struct. The old "src_net" is renamed to "net" to avoid
confusion with real source netns, and will be deprecated later. The use
of src_net are converted to params->net trivially.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250219125039.18024-3-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited commit fixed a software GSO bug with VXLAN + IPSec in tunnel
mode. Unfortunately, it is slightly broader than necessary, as it also
severely affects performance for Geneve + IPSec transport mode over a
device capable of both HW GSO and IPSec crypto offload. In this case,
xfrm_output unnecessarily triggers software GSO instead of letting the
HW do it. In simple iperf3 tests over Geneve + IPSec transport mode over
a back-2-back pair of NICs with MTU 1500, the performance was observed
to be up to 6x worse when doing software GSO compared to leaving it to
the hardware.
This commit makes xfrm_output only trigger software GSO in crypto
offload cases for already encapsulated packets in tunnel mode, as not
doing so would then cause the inner tunnel skb->inner_networking_header
to be overwritten and break software GSO for that packet later if the
device turns out to not be capable of HW GSO.
Taking a closer look at the conditions for the original bug, to better
understand the reasons for this change:
- vxlan_build_skb -> iptunnel_handle_offloads sets inner_protocol and
inner network header.
- then, udp_tunnel_xmit_skb -> ip_tunnel_xmit adds outer transport and
network headers.
- later in the xmit path, xfrm_output -> xfrm_outer_mode_output ->
xfrm4_prepare_output -> xfrm4_tunnel_encap_add overwrites the inner
network header with the one set in ip_tunnel_xmit before adding the
second outer header.
- __dev_queue_xmit -> validate_xmit_skb checks whether GSO segmentation
needs to happen based on dev features. In the original bug, the hw
couldn't segment the packets, so skb_gso_segment was invoked.
- deep in the .gso_segment callback machinery, __skb_udp_tunnel_segment
tries to use the wrong inner network header, expecting the one set in
iptunnel_handle_offloads but getting the one set by xfrm instead.
- a bit later, ipv6_gso_segment accesses the wrong memory based on that
wrong inner network header.
With the new change, the original bug (or similar ones) cannot happen
again, as xfrm will now trigger software GSO before applying a tunnel.
This concern doesn't exist in packet offload mode, when the HW adds
encapsulation headers. For the non-offloaded packets (crypto in SW),
software GSO is still done unconditionally in the else branch.
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Fixes: a204aef9fd77 ("xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_output")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Packets that match the output xfrm policy are delivered to the netstack.
In IPsec packet mode for tunnel mode, the HW is responsible for building
the hard header and outer IP header. In such a situation, the inner
header may refer to a network that is not directly reachable by the host,
resulting in a failed neighbor resolution. The packet is then dropped.
xfrm policy defines the netdevice to use for xmit so we can send packets
directly to it.
Makes direct xmit exclusive to tunnel mode, since some rules may apply
in transport mode.
Fixes: f8a70afafc17 ("xfrm: add TX datapath support for IPsec packet offload mode")
Signed-off-by: Alexandre Cassen <acassen@corp.free.fr>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
In tunnel mode, for the packet offload, there were no PMTU signaling
to the upper level about need to fragment the packet. As a solution,
call to already existing xfrm[4|6]_tunnel_check_size() to perform that.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Almost all drivers except bond and nsim had same check if device
can perform XFRM offload on that specific packet. The check was that
packet doesn't have IPv4 options and IPv6 extensions.
In NIC drivers, the IPv4 HELEN comparison was slightly different, but
the intent was to check for the same conditions. So let's chose more
strict variant as a common base.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
After change of initialization of x->type_offload pointer to be valid
only for offloaded SAs. There is no need to rely on both x->type_offload
and x->xso.type to determine if SA is offloaded or not.
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
SA replay mode is initialized differently for user-space and
kernel-space users, but the call to xfrm_init_replay() existed in
common path with boolean protection. That caused to situation where
we have two different function orders.
So let's rewrite the SA initialization flow to have same order for
both in-kernel and user-space callers.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
XFRM offload path is probed even if offload isn't needed at all. Let's
make sure that x->type_offload pointer stays NULL for such path to
reduce ambiguity.
Fixes: 9d389d7f84bb ("xfrm: Add a xfrm type offload.")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/d338b246f087ee2b2a305348c896449e107a7ff4.1738746872.git.namcao@linutronix.de
|
|
In non-ESN mode, the SEQ numbers are limited to 32 bits and seq_hi/oseq_hi
are not used. So make sure that user gets proper error message, in case
such assignment occurred.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-01-27
1) Fix incrementing the upper 32 bit sequence numbers for GSO skbs.
From Jianbo Liu.
2) Fix an out-of-bounds read on xfrm state lookup.
From Florian Westphal.
3) Fix secpath handling on packet offload mode.
From Alexandre Cassen.
4) Fix the usage of skb->sk in the xfrm layer.
5) Don't disable preemption while looking up cache state
to fix PREEMPT_RT.
From Sebastian Sewior.
* tag 'ipsec-2025-01-27' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Don't disable preemption while looking up cache state.
xfrm: Fix the usage of skb->sk
xfrm: delete intermediate secpath entry in packet offload mode
xfrm: state: fix out-of-bounds read during lookup
xfrm: replay: Fix the update of replay_esn->oseq_hi for GSO
====================
Link: https://patch.msgid.link/20250127060757.3946314-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the state cache lookup xfrm_input_state_lookup() first disables
preemption, to remain on the CPU and then retrieves a per-CPU pointer.
Within the preempt-disable section it also acquires
netns_xfrm::xfrm_state_lock, a spinlock_t. This lock must not be
acquired with explicit disabled preemption (such as by get_cpu())
because this lock becomes a sleeping lock on PREEMPT_RT.
To remain on the same CPU is just an optimisation for the CPU local
lookup. The actual modification of the per-CPU variable happens with
netns_xfrm::xfrm_state_lock acquired.
Remove get_cpu() and use the state_cache_input on the current CPU.
Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://lore.kernel.org/all/CAADnVQKkCLaj=roayH=Mjiiqz_svdf1tsC3OE4EC0E=mAD+L1A@mail.gmail.com/
Fixes: 81a331a0e72dd ("xfrm: Add an inbound percpu state cache.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
xfrm assumed to always have a full socket at skb->sk.
This is not always true, so fix it by converting to a
full socket before it is used.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
|
|
init_dummy_netdev() can initialize statically declared or embedded
net_devices. Such netdevs did not come from alloc_netdev_mqs().
After recent work by Breno, there are the only two cases where
we have do that.
Switch those cases to alloc_netdev_mqs() and delete init_dummy_netdev().
Dealing with static netdevs is not worth the maintenance burden.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250113003456.3904110-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Previously xfrm_dev_state_advance_esn() was added for RX only. But
it's possible that ESN context also need to be synced to hardware for
TX, so call it for outbound in this patch.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add tracepoints to the IP-TFS code.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Handle the receipt of the outer tunnel packets out-of-order. Pointers to
the out-of-order packets are saved in a window (array) awaiting needed
prior packets. When the required prior packets are received the now
in-order packets are then passed on to the regular packet receive code.
A timer is used to consider missing earlier packet as lost so the
algorithm will advance.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Avoid copying the inner packet data by sharing the skb data fragments
from the output packet skb into new inner packet skb.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add an optimization of re-using the tunnel outer skb re-transmission
of the inner packet to avoid skb allocation and copy.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add support for handling receipt of partial inner packets that have
been fragmented across multiple outer IP-TFS tunnel packets.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add handling of packets received from the tunnel. This implements
tunnel egress functionality.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add support for tunneling user (inner) packets that are larger than the
tunnel's path MTU (outer) using IP-TFS fragmentation.
Signed-off-by: Christian Hopps <chopps@labn.net>
Tested-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
