summaryrefslogtreecommitdiff
path: root/Documentation/hwmon/w83l786ng.rst
blob: 2b7776190de3bf969ac24e52649944e8be2fb56b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
Kernel driver w83l786ng
=======================

Supported chips:

  * Winbond W83L786NG/W83L786NR

    Prefix: 'w83l786ng'

    Addresses scanned: I2C 0x2e - 0x2f

    Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L786NRNG09.pdf

Author: Kevin Lo <kevlo@kevlo.org>


Module Parameters
-----------------

* reset boolean
    (default 0)

    Use 'reset=1' to reset the chip (via index 0x40, bit 7). The default
    behavior is no chip reset to preserve BIOS settings


Description
-----------

This driver implements support for Winbond W83L786NG/W83L786NR chips.

The driver implements two temperature sensors, two fan rotation speed
sensors, and three voltage sensors.

Temperatures are measured in degrees Celsius and measurement resolution is 1
degC for temp1 and temp2.

Fan rotation speeds are reported in RPM (rotations per minute). Fan readings
readings can be divided by a programmable divider (1, 2, 4, 8, 16, 32, 64
or 128 for fan 1/2) to give the readings more range or accuracy.

Voltage sensors (also known as IN sensors) report their values in millivolts.
An alarm is triggered if the voltage has crossed a programmable minimum
or maximum limit.

/sys files
----------

pwm[1-2]
	    - this file stores PWM duty cycle or DC value (fan speed) in range:

	      0 (stop) to 255 (full)
pwm[1-2]_enable
	    - this file controls mode of fan/temperature control:

	    * 0 Manual Mode
	    * 1 Thermal Cruise
	    * 2 Smart Fan II
	    * 4 FAN_SET
pwm[1-2]_mode
	    - Select PWM of DC mode

	    * 0 DC
	    * 1 PWM
tolerance[1-2]
	    - Value in degrees of Celsius (degC) for +- T