summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/imx6ul-imx6ull-opos6uldev.dtsi
blob: 18cac19aa9b0f8e00a497da6bf9752e1b4807a09 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
// SPDX-License-Identifier: GPL-2.0 OR MIT
//
// Copyright 2019 Armadeus Systems <support@armadeus.com>

/ {
	chosen {
		stdout-path = &uart1;
	};

	backlight: backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm3 0 191000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		power-supply = <&reg_5v>;
		status = "okay";
	};

	gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_keys>;

		user-button {
			label = "User button";
			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
			linux,code = <BTN_MISC>;
			wakeup-source;
		};
	};

	leds {
		compatible = "gpio-leds";

		user-led {
			label = "User";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_led>;
			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "heartbeat";
		};
	};

	onewire {
		compatible = "w1-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_w1>;
		gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
	};

	panel: panel {
		compatible = "armadeus,st0700-adapt";
		power-supply = <&reg_3v3>;
		backlight = <&backlight>;

		port {
			panel_in: endpoint {
				remote-endpoint = <&lcdif_out>;
			};
		};
	};

	reg_5v: regulator-5v {
		compatible = "regulator-fixed";
		regulator-name = "5V";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
	};

	reg_usbotg1_vbus: regulator-usbotg1vbus {
		compatible = "regulator-fixed";
		regulator-name = "usbotg1vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbotg1_vbus>;
		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};

	reg_usbotg2_vbus: regulator-usbotg2vbus {
		compatible = "regulator-fixed";
		regulator-name = "usbotg2vbus";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usbotg2_vbus>;
		gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
		enable-active-high;
	};
};

&adc1 {
	vref-supply = <&reg_3v3>;
	status = "okay";
};

&can1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
	xceiver-supply = <&reg_5v>;
	status = "okay";
};

&can2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
	xceiver-supply = <&reg_5v>;
	status = "okay";
};

&ecspi4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi4>;
	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	clock-frequency = <400000>;
	status = "okay";
};

&i2c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	clock-frequency = <400000>;
	status = "okay";
};

&lcdif {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lcdif>;
	status = "okay";

	port {
		lcdif_out: endpoint {
			remote-endpoint = <&panel_in>;
		};
	};
};

&pwm3 {
	#pwm-cells = <2>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pwm3>;
	status = "okay";
};

&snvs_pwrkey {
	status = "disabled";
};

&tsc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_tsc>;
	xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
	measure-delay-time = <0xffff>;
	pre-charge-time = <0xffff>;
	status = "okay";
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&uart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&usbotg1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1_id>;
	vbus-supply = <&reg_usbotg1_vbus>;
	dr_mode = "otg";
	disable-over-current;
	status = "okay";
};

&usbotg2 {
	vbus-supply = <&reg_usbotg2_vbus>;
	dr_mode = "host";
	disable-over-current;
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_gpios>;

	pinctrl_ecspi4: ecspi4grp {
		fsl,pins = <
			MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK	0x1b0b0
			MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI	0x1b0b0
			MX6UL_PAD_NAND_DATA06__ECSPI4_MISO	0x1b0b0
			MX6UL_PAD_NAND_DATA01__GPIO4_IO03	0x1b0b0
			MX6UL_PAD_NAND_DATA07__GPIO4_IO09	0x1b0b0
		>;
	};

	pinctrl_flexcan1: flexcan1grp {
		fsl,pins = <
			MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
			MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
		>;
	};

	pinctrl_flexcan2: flexcan2grp {
		fsl,pins = <
			MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
			MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
		>;
	};

	pinctrl_gpios: gpiosgrp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO09__GPIO1_IO09	0x0b0b0
			MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25	0x0b0b0
			MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24	0x0b0b0
			MX6UL_PAD_NAND_RE_B__GPIO4_IO00		0x0b0b0
			MX6UL_PAD_GPIO1_IO08__GPIO1_IO08	0x0b0b0
			MX6UL_PAD_UART1_CTS_B__GPIO1_IO18	0x0b0b0
			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x0b0b0
			MX6UL_PAD_NAND_WE_B__GPIO4_IO01		0x0b0b0
		>;
	};

	pinctrl_gpio_keys: gpiokeysgrp {
		fsl,pins = <
			MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x0b0b0
		>;
	};

	pinctrl_i2c1: i2c1grp {
		fsl,pins = <
			MX6UL_PAD_UART4_RX_DATA__I2C1_SDA	0x4001b8b0
			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL	0x4001b8b0
		>;
	};

	pinctrl_i2c2: i2c2grp {
		fsl,pins = <
			MX6UL_PAD_UART5_RX_DATA__I2C2_SDA	0x4001b8b0
			MX6UL_PAD_UART5_TX_DATA__I2C2_SCL	0x4001b8b0
		>;
	};

	pinctrl_lcdif: lcdifgrp {
		fsl,pins = <
			MX6UL_PAD_LCD_CLK__LCDIF_CLK	    0x100b1
			MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE  0x100b1
			MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC    0x100b1
			MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC    0x100b1
			MX6UL_PAD_LCD_DATA00__LCDIF_DATA00  0x100b1
			MX6UL_PAD_LCD_DATA01__LCDIF_DATA01  0x100b1
			MX6UL_PAD_LCD_DATA02__LCDIF_DATA02  0x100b1
			MX6UL_PAD_LCD_DATA03__LCDIF_DATA03  0x100b1
			MX6UL_PAD_LCD_DATA04__LCDIF_DATA04  0x100b1
			MX6UL_PAD_LCD_DATA05__LCDIF_DATA05  0x100b1
			MX6UL_PAD_LCD_DATA06__LCDIF_DATA06  0x100b1
			MX6UL_PAD_LCD_DATA07__LCDIF_DATA07  0x100b1
			MX6UL_PAD_LCD_DATA08__LCDIF_DATA08  0x100b1
			MX6UL_PAD_LCD_DATA09__LCDIF_DATA09  0x100b1
			MX6UL_PAD_LCD_DATA10__LCDIF_DATA10  0x100b1
			MX6UL_PAD_LCD_DATA11__LCDIF_DATA11  0x100b1
			MX6UL_PAD_LCD_DATA12__LCDIF_DATA12  0x100b1
			MX6UL_PAD_LCD_DATA13__LCDIF_DATA13  0x100b1
			MX6UL_PAD_LCD_DATA14__LCDIF_DATA14  0x100b1
			MX6UL_PAD_LCD_DATA15__LCDIF_DATA15  0x100b1
			MX6UL_PAD_LCD_DATA16__LCDIF_DATA16  0x100b1
			MX6UL_PAD_LCD_DATA17__LCDIF_DATA17  0x100b1
		>;
	};

	pinctrl_led: ledgrp {
		fsl,pins = <
			MX6UL_PAD_LCD_RESET__GPIO3_IO04		0x0b0b0
		>;
	};

	pinctrl_pwm3: pwm3grp {
		fsl,pins = <
			MX6UL_PAD_NAND_ALE__PWM3_OUT		0x1b0b0
		>;
	};

	pinctrl_tsc: tscgrp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO01__GPIO1_IO01       0xb0
			MX6UL_PAD_GPIO1_IO02__GPIO1_IO02       0xb0
			MX6UL_PAD_GPIO1_IO03__GPIO1_IO03       0xb0
			MX6UL_PAD_GPIO1_IO04__GPIO1_IO04       0xb0
		>;
	};

	pinctrl_uart1: uart1grp {
		fsl,pins = <
			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
		>;
	};

	pinctrl_uart2: uart2grp {
		fsl,pins = <
			MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX	0x1b0b1
			MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX	0x1b0b1
		>;
	};

	pinctrl_usbotg1_id: usbotg1idgrp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID	0x1b0b0
		>;
	};

	pinctrl_usbotg1_vbus: usbotg1vbusgrp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO05__GPIO1_IO05	0x1b0b0
		>;
	};
};