1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright 2023 Gateworks Corporation
*/
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/phy/phy-imx8-pcie.h>
/ {
connector {
compatible = "gpio-usb-b-connector", "usb-b-connector";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbcon1>;
type = "micro";
label = "Type-C";
id-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
port {
usb_dr_connector: endpoint {
remote-endpoint = <&usb3_dwc>;
};
};
};
led-controller {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
led-0 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_GREEN>;
gpios = <&gpio4 1 GPIO_ACTIVE_HIGH>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
led-1 {
function = LED_FUNCTION_STATUS;
color = <LED_COLOR_ID_RED>;
gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
};
pcie0_refclk: clock-pcie0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pps {
compatible = "pps-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pps>;
gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi2>;
cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
status = "okay";
};
&gpio4 {
gpio-line-names =
"", "", "", "",
"", "", "", "",
"dio1", "", "", "dio0",
"", "", "pci_usb_sel", "",
"", "", "", "",
"", "", "", "",
"dio3", "", "dio2", "",
"pci_wdis#", "", "", "";
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
accelerometer@19 {
compatible = "st,lis2de12";
reg = <0x19>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
st,drdy-int-pin = <1>;
interrupt-parent = <&gpio4>;
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
};
};
&pcie_phy {
fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
fsl,clkreq-unsupported;
clocks = <&pcie0_refclk>;
clock-names = "ref";
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio4 29 GPIO_ACTIVE_LOW>;
status = "okay";
};
/* GPS */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
/* off-board header */
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
/* USB1 Type-C front panel */
&usb3_0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb1>;
fsl,over-current-active-low;
status = "okay";
};
&usb3_phy0 {
status = "okay";
};
&usb_dwc3_0 {
/* dual role is implemented but not a full featured OTG */
adp-disable;
hnp-disable;
srp-disable;
dr_mode = "otg";
usb-role-switch;
role-switch-default-mode = "peripheral";
status = "okay";
port {
usb3_dwc: endpoint {
remote-endpoint = <&usb_dr_connector>;
};
};
};
/* USB2 - MiniPCIe socket */
&usb3_1 {
fsl,permanently-attached;
fsl,disable-port-power-control;
status = "okay";
};
&usb3_phy1 {
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08 0x40000146 /* DIO1 */
MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11 0x40000146 /* DIO0 */
MX8MP_IOMUXC_SAI1_TXD2__GPIO4_IO14 0x40000106 /* PCIE_USBSEL */
MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26 0x40000146 /* DIO2 */
MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x40000146 /* DIO3 */
MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x40000106 /* PCIE_WDIS# */
>;
};
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21 0x150 /* IRQ */
>;
};
pinctrl_gpio_leds: gpioledgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x6 /* LEDG */
MX8MP_IOMUXC_SAI1_RXD3__GPIO4_IO05 0x6 /* LEDR */
>;
};
pinctrl_pcie0: pcie0grp {
fsl,pins = <
MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x106
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x146
>;
};
pinctrl_usb1: usb1grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 /* USB1_FLT# */
>;
};
pinctrl_usbcon1: usbcon1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD0__GPIO3_IO21 0x140 /* USB1_ID */
>;
};
pinctrl_spi2: spi2grp {
fsl,pins = <
MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x140
MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x140
MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x140
MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140
MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX 0x140
MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX 0x140
>;
};
};
|
