summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/freescale/enetc/enetc_ierb.c
blob: 91f02c5050285ba63e84513dd980d0b144e900f6 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2021 NXP
 *
 * The Integrated Endpoint Register Block (IERB) is configured by pre-boot
 * software and is supposed to be to ENETC what a NVRAM is to a 'real' PCIe
 * card. Upon FLR, values from the IERB are transferred to the ENETC PFs, and
 * are read-only in the PF memory space.
 *
 * This driver fixes up the power-on reset values for the ENETC shared FIFO,
 * such that the TX and RX allocations are sufficient for jumbo frames, and
 * that intelligent FIFO dropping is enabled before the internal data
 * structures are corrupted.
 *
 * Even though not all ports might be used on a given board, we are not
 * concerned with partitioning the FIFO, because the default values configure
 * no strict reservations, so the entire FIFO can be used by the RX of a single
 * port, or the TX of a single port.
 */

#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include "enetc.h"
#include "enetc_ierb.h"

/* IERB registers */
#define ENETC_IERB_TXMBAR(port)			(((port) * 0x100) + 0x8080)
#define ENETC_IERB_RXMBER(port)			(((port) * 0x100) + 0x8090)
#define ENETC_IERB_RXMBLR(port)			(((port) * 0x100) + 0x8094)
#define ENETC_IERB_RXBCR(port)			(((port) * 0x100) + 0x80a0)
#define ENETC_IERB_TXBCR(port)			(((port) * 0x100) + 0x80a8)
#define ENETC_IERB_FMBDTR			0xa000

#define ENETC_RESERVED_FOR_ICM			1024

struct enetc_ierb {
	void __iomem *regs;
};

static void enetc_ierb_write(struct enetc_ierb *ierb, u32 offset, u32 val)
{
	iowrite32(val, ierb->regs + offset);
}

int enetc_ierb_register_pf(struct platform_device *pdev,
			   struct pci_dev *pf_pdev)
{
	struct enetc_ierb *ierb = platform_get_drvdata(pdev);
	int port = enetc_pf_to_port(pf_pdev);
	u16 tx_credit, rx_credit, tx_alloc;

	if (port < 0)
		return -ENODEV;

	if (!ierb)
		return -EPROBE_DEFER;

	/* By default, it is recommended to set the Host Transfer Agent
	 * per port transmit byte credit to "1000 + max_frame_size/2".
	 * The power-on reset value (1800 bytes) is rounded up to the nearest
	 * 100 assuming a maximum frame size of 1536 bytes.
	 */
	tx_credit = roundup(1000 + ENETC_MAC_MAXFRM_SIZE / 2, 100);

	/* Internal memory allocated for transmit buffering is guaranteed but
	 * not reserved; i.e. if the total transmit allocation is not used,
	 * then the unused portion is not left idle, it can be used for receive
	 * buffering but it will be reclaimed, if required, from receive by
	 * intelligently dropping already stored receive frames in the internal
	 * memory to ensure that the transmit allocation is respected.
	 *
	 * PaTXMBAR must be set to a value larger than
	 *     PaTXBCR + 2 * max_frame_size + 32
	 * if frame preemption is not enabled, or to
	 *     2 * PaTXBCR + 2 * p_max_frame_size (pMAC maximum frame size) +
	 *     2 * np_max_frame_size (eMAC maximum frame size) + 64
	 * if frame preemption is enabled.
	 */
	tx_alloc = roundup(2 * tx_credit + 4 * ENETC_MAC_MAXFRM_SIZE + 64, 16);

	/* Initial credits, in units of 8 bytes, to the Ingress Congestion
	 * Manager for the maximum amount of bytes the port is allocated for
	 * pending traffic.
	 * It is recommended to set the initial credits to 2 times the maximum
	 * frame size (2 frames of maximum size).
	 */
	rx_credit = DIV_ROUND_UP(ENETC_MAC_MAXFRM_SIZE * 2, 8);

	enetc_ierb_write(ierb, ENETC_IERB_TXBCR(port), tx_credit);
	enetc_ierb_write(ierb, ENETC_IERB_TXMBAR(port), tx_alloc);
	enetc_ierb_write(ierb, ENETC_IERB_RXBCR(port), rx_credit);

	return 0;
}
EXPORT_SYMBOL(enetc_ierb_register_pf);

static int enetc_ierb_probe(struct platform_device *pdev)
{
	struct enetc_ierb *ierb;
	void __iomem *regs;

	ierb = devm_kzalloc(&pdev->dev, sizeof(*ierb), GFP_KERNEL);
	if (!ierb)
		return -ENOMEM;

	regs = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
	if (IS_ERR(regs))
		return PTR_ERR(regs);

	ierb->regs = regs;

	/* Free buffer depletion threshold in bytes.
	 * This sets the minimum amount of free buffer memory that should be
	 * maintained in the datapath sub system, and when the amount of free
	 * buffer memory falls below this threshold, a depletion indication is
	 * asserted, which may trigger "intelligent drop" frame releases from
	 * the ingress queues in the ICM.
	 * It is recommended to set the free buffer depletion threshold to 1024
	 * bytes, since the ICM needs some FIFO memory for its own use.
	 */
	enetc_ierb_write(ierb, ENETC_IERB_FMBDTR, ENETC_RESERVED_FOR_ICM);

	platform_set_drvdata(pdev, ierb);

	return 0;
}

static int enetc_ierb_remove(struct platform_device *pdev)
{
	return 0;
}

static const struct of_device_id enetc_ierb_match[] = {
	{ .compatible = "fsl,ls1028a-enetc-ierb", },
	{},
};
MODULE_DEVICE_TABLE(of, enetc_ierb_match);

static struct platform_driver enetc_ierb_driver = {
	.driver = {
		.name = "fsl-enetc-ierb",
		.of_match_table = enetc_ierb_match,
	},
	.probe = enetc_ierb_probe,
	.remove = enetc_ierb_remove,
};

module_platform_driver(enetc_ierb_driver);

MODULE_DESCRIPTION("NXP ENETC IERB");
MODULE_LICENSE("Dual BSD/GPL");