summaryrefslogtreecommitdiff
path: root/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
blob: 9061ece7ff6ab1e42aee9ee13528ee3dabf35a2c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
// SPDX-License-Identifier: GPL-2.0-only

#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>

/* USB QSCRATCH Hardware registers */
#define QSCRATCH_GENERAL_CFG		(0x08)
#define HSUSB_PHY_CTRL_REG		(0x10)

/* PHY_CTRL_REG */
#define HSUSB_CTRL_DMSEHV_CLAMP		BIT(24)
#define HSUSB_CTRL_USB2_SUSPEND		BIT(23)
#define HSUSB_CTRL_UTMI_CLK_EN		BIT(21)
#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID	BIT(20)
#define HSUSB_CTRL_USE_CLKCORE		BIT(18)
#define HSUSB_CTRL_DPSEHV_CLAMP		BIT(17)
#define HSUSB_CTRL_COMMONONN		BIT(11)
#define HSUSB_CTRL_ID_HV_CLAMP		BIT(9)
#define HSUSB_CTRL_OTGSESSVLD_CLAMP	BIT(8)
#define HSUSB_CTRL_CLAMP_EN		BIT(7)
#define HSUSB_CTRL_RETENABLEN		BIT(1)
#define HSUSB_CTRL_POR			BIT(0)

/* QSCRATCH_GENERAL_CFG */
#define HSUSB_GCFG_XHCI_REV		BIT(2)

/* USB QSCRATCH Hardware registers */
#define SSUSB_PHY_CTRL_REG		(0x00)
#define SSUSB_PHY_PARAM_CTRL_1		(0x04)
#define SSUSB_PHY_PARAM_CTRL_2		(0x08)
#define CR_PROTOCOL_DATA_IN_REG		(0x0c)
#define CR_PROTOCOL_DATA_OUT_REG	(0x10)
#define CR_PROTOCOL_CAP_ADDR_REG	(0x14)
#define CR_PROTOCOL_CAP_DATA_REG	(0x18)
#define CR_PROTOCOL_READ_REG		(0x1c)
#define CR_PROTOCOL_WRITE_REG		(0x20)

/* PHY_CTRL_REG */
#define SSUSB_CTRL_REF_USE_PAD		BIT(28)
#define SSUSB_CTRL_TEST_POWERDOWN	BIT(27)
#define SSUSB_CTRL_LANE0_PWR_PRESENT	BIT(24)
#define SSUSB_CTRL_SS_PHY_EN		BIT(8)
#define SSUSB_CTRL_SS_PHY_RESET		BIT(7)

/* SSPHY control registers - Does this need 0x30? */
#define SSPHY_CTRL_RX_OVRD_IN_HI(lane)	(0x1006 + 0x100 * (lane))
#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane)	(0x1002 + 0x100 * (lane))

/* SSPHY SoC version specific values */
#define SSPHY_RX_EQ_VALUE		4 /* Override value for rx_eq */
/* Override value for transmit preemphasis */
#define SSPHY_TX_DEEMPH_3_5DB		23
/* Override value for mpll */
#define SSPHY_MPLL_VALUE		0

/* QSCRATCH PHY_PARAM_CTRL1 fields */
#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK	GENMASK(26, 19)
#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK	GENMASK(19, 13)
#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK	GENMASK(13, 7)
#define PHY_PARAM_CTRL1_LOS_BIAS_MASK		GENMASK(7, 2)

#define PHY_PARAM_CTRL1_MASK				\
		(PHY_PARAM_CTRL1_TX_FULL_SWING_MASK |	\
		 PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK |	\
		 PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK |	\
		 PHY_PARAM_CTRL1_LOS_BIAS_MASK)

#define PHY_PARAM_CTRL1_TX_FULL_SWING(x)	\
		(((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x)	\
		(((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x)	\
		(((x) <<  8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
#define PHY_PARAM_CTRL1_LOS_BIAS(x)	\
		(((x) <<  3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)

/* RX OVRD IN HI bits */
#define RX_OVRD_IN_HI_RX_RESET_OVRD		BIT(13)
#define RX_OVRD_IN_HI_RX_RX_RESET		BIT(12)
#define RX_OVRD_IN_HI_RX_EQ_OVRD		BIT(11)
#define RX_OVRD_IN_HI_RX_EQ_MASK		GENMASK(10, 7)
#define RX_OVRD_IN_HI_RX_EQ(x)			((x) << 8)
#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD		BIT(7)
#define RX_OVRD_IN_HI_RX_EQ_EN			BIT(6)
#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD	BIT(5)
#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK	GENMASK(4, 2)
#define RX_OVRD_IN_HI_RX_RATE_OVRD		BIT(2)
#define RX_OVRD_IN_HI_RX_RATE_MASK		GENMASK(2, 0)

/* TX OVRD DRV LO register bits */
#define TX_OVRD_DRV_LO_AMPLITUDE_MASK		GENMASK(6, 0)
#define TX_OVRD_DRV_LO_PREEMPH_MASK		GENMASK(13, 6)
#define TX_OVRD_DRV_LO_PREEMPH(x)		((x) << 7)
#define TX_OVRD_DRV_LO_EN			BIT(14)

/* MPLL bits */
#define SSPHY_MPLL_MASK				GENMASK(8, 5)
#define SSPHY_MPLL(x)				((x) << 5)

/* SS CAP register bits */
#define SS_CR_CAP_ADDR_REG			BIT(0)
#define SS_CR_CAP_DATA_REG			BIT(0)
#define SS_CR_READ_REG				BIT(0)
#define SS_CR_WRITE_REG				BIT(0)

struct usb_phy {
	void __iomem		*base;
	struct device		*dev;
	struct clk		*xo_clk;
	struct clk		*ref_clk;
	u32			rx_eq;
	u32			tx_deamp_3_5db;
	u32			mpll;
};

struct phy_drvdata {
	struct phy_ops	ops;
	u32		clk_rate;
};

/**
 * Write register and read back masked value to confirm it is written
 *
 * @base - QCOM DWC3 PHY base virtual address.
 * @offset - register offset.
 * @mask - register bitmask specifying what should be updated
 * @val - value to write.
 */
static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
					  u32 offset,
					  const u32 mask, u32 val)
{
	u32 write_val, tmp = readl(phy_dwc3->base + offset);

	tmp &= ~mask;		/* retain other bits */
	write_val = tmp | val;

	writel(write_val, phy_dwc3->base + offset);

	/* Read back to see if val was written */
	tmp = readl(phy_dwc3->base + offset);
	tmp &= mask;		/* clear other bits */

	if (tmp != val)
		dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
}

static int wait_for_latch(void __iomem *addr)
{
	u32 retry = 10;

	while (true) {
		if (!readl(addr))
			break;

		if (--retry == 0)
			return -ETIMEDOUT;

		usleep_range(10, 20);
	}

	return 0;
}

/**
 * Write SSPHY register
 *
 * @base - QCOM DWC3 PHY base virtual address.
 * @addr - SSPHY address to write.
 * @val - value to write.
 */
static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
				u32 addr, u32 val)
{
	int ret;

	writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
	writel(SS_CR_CAP_ADDR_REG,
	       phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);

	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
	if (ret)
		goto err_wait;

	writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
	writel(SS_CR_CAP_DATA_REG,
	       phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);

	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
	if (ret)
		goto err_wait;

	writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);

	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);

err_wait:
	if (ret)
		dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
	return ret;
}

/**
 * Read SSPHY register.
 *
 * @base - QCOM DWC3 PHY base virtual address.
 * @addr - SSPHY address to read.
 */
static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
			       u32 addr, u32 *val)
{
	int ret;

	writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
	writel(SS_CR_CAP_ADDR_REG,
	       phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);

	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
	if (ret)
		goto err_wait;

	/*
	 * Due to hardware bug, first read of SSPHY register might be
	 * incorrect. Hence as workaround, SW should perform SSPHY register
	 * read twice, but use only second read and ignore first read.
	 */
	writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);

	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
	if (ret)
		goto err_wait;

	/* throwaway read */
	readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);

	writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);

	ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
	if (ret)
		goto err_wait;

	*val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);

err_wait:
	return ret;
}

static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
{
	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
	int ret;
	u32 val;

	ret = clk_prepare_enable(phy_dwc3->xo_clk);
	if (ret)
		return ret;

	ret = clk_prepare_enable(phy_dwc3->ref_clk);
	if (ret) {
		clk_disable_unprepare(phy_dwc3->xo_clk);
		return ret;
	}

	/*
	 * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
	 * enable clamping, and disable RETENTION (power-on default is ENABLED)
	 */
	val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
		HSUSB_CTRL_RETENABLEN  | HSUSB_CTRL_COMMONONN |
		HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
		HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
		HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;

	/* use core clock if external reference is not present */
	if (!phy_dwc3->xo_clk)
		val |= HSUSB_CTRL_USE_CLKCORE;

	writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
	usleep_range(2000, 2200);

	/* Disable (bypass) VBUS and ID filters */
	writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);

	return 0;
}

static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
{
	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);

	clk_disable_unprepare(phy_dwc3->ref_clk);
	clk_disable_unprepare(phy_dwc3->xo_clk);

	return 0;
}

static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
{
	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
	int ret;
	u32 data;

	ret = clk_prepare_enable(phy_dwc3->xo_clk);
	if (ret)
		return ret;

	ret = clk_prepare_enable(phy_dwc3->ref_clk);
	if (ret) {
		clk_disable_unprepare(phy_dwc3->xo_clk);
		return ret;
	}

	/* reset phy */
	data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
	writel(data | SSUSB_CTRL_SS_PHY_RESET,
	       phy_dwc3->base + SSUSB_PHY_CTRL_REG);
	usleep_range(2000, 2200);
	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);

	/* clear REF_PAD if we don't have XO clk */
	if (!phy_dwc3->xo_clk)
		data &= ~SSUSB_CTRL_REF_USE_PAD;
	else
		data |= SSUSB_CTRL_REF_USE_PAD;

	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);

	/* wait for ref clk to become stable, this can take up to 30ms */
	msleep(30);

	data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
	writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);

	/*
	 * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
	 * in HS mode instead of SS mode. Workaround it by asserting
	 * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
	 */
	ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
	if (ret)
		goto err_phy_trans;

	data |= (1 << 7);
	ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
	if (ret)
		goto err_phy_trans;

	ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
	if (ret)
		goto err_phy_trans;

	data &= ~0xff0;
	data |= 0x20;
	ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
	if (ret)
		goto err_phy_trans;

	/*
	 * Fix RX Equalization setting as follows
	 * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
	 * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
	 * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
	 * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
	 */
	ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
	if (ret)
		goto err_phy_trans;

	data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
	data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
	data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
	data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
	data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
	ret = usb_ss_write_phycreg(phy_dwc3,
				   SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
	if (ret)
		goto err_phy_trans;

	/*
	 * Set EQ and TX launch amplitudes as follows
	 * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
	 * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
	 * LANE0.TX_OVRD_DRV_LO.EN set to 1.
	 */
	ret = usb_ss_read_phycreg(phy_dwc3,
				  SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
	if (ret)
		goto err_phy_trans;

	data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
	data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
	data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
	data |= 0x6E;
	data |= TX_OVRD_DRV_LO_EN;
	ret = usb_ss_write_phycreg(phy_dwc3,
				   SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
	if (ret)
		goto err_phy_trans;

	data = 0;
	data &= ~SSPHY_MPLL_MASK;
	data |= SSPHY_MPLL(phy_dwc3->mpll);
	usb_ss_write_phycreg(phy_dwc3, 0x30, data);

	/*
	 * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
	 * TX_FULL_SWING [26:20] amplitude to 110
	 * TX_DEEMPH_6DB [19:14] to 32
	 * TX_DEEMPH_3_5DB [13:8] set based on SoC version
	 * LOS_BIAS [7:3] to 9
	 */
	data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);

	data &= ~PHY_PARAM_CTRL1_MASK;

	data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
		PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
		PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
		PHY_PARAM_CTRL1_LOS_BIAS(0x9);

	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
			       PHY_PARAM_CTRL1_MASK, data);

err_phy_trans:
	return ret;
}

static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
{
	struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);

	/* Sequence to put SSPHY in low power state:
	 * 1. Clear REF_PHY_EN in PHY_CTRL_REG
	 * 2. Clear REF_USE_PAD in PHY_CTRL_REG
	 * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
	 */
	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
			       SSUSB_CTRL_SS_PHY_EN, 0x0);
	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
			       SSUSB_CTRL_REF_USE_PAD, 0x0);
	usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
			       SSUSB_CTRL_TEST_POWERDOWN, 0x0);

	clk_disable_unprepare(phy_dwc3->ref_clk);
	clk_disable_unprepare(phy_dwc3->xo_clk);

	return 0;
}

static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
	.ops = {
		.init		= qcom_ipq806x_usb_hs_phy_init,
		.exit		= qcom_ipq806x_usb_hs_phy_exit,
		.owner		= THIS_MODULE,
	},
	.clk_rate = 60000000,
};

static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
	.ops = {
		.init		= qcom_ipq806x_usb_ss_phy_init,
		.exit		= qcom_ipq806x_usb_ss_phy_exit,
		.owner		= THIS_MODULE,
	},
	.clk_rate = 125000000,
};

static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
	{ .compatible = "qcom,ipq806x-usb-phy-hs",
	  .data = &qcom_ipq806x_usb_hs_drvdata },
	{ .compatible = "qcom,ipq806x-usb-phy-ss",
	  .data = &qcom_ipq806x_usb_ss_drvdata },
	{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);

static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
{
	struct resource *res;
	resource_size_t size;
	struct phy *generic_phy;
	struct usb_phy *phy_dwc3;
	const struct phy_drvdata *data;
	struct phy_provider *phy_provider;

	phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
	if (!phy_dwc3)
		return -ENOMEM;

	data = of_device_get_match_data(&pdev->dev);

	phy_dwc3->dev = &pdev->dev;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
		return -EINVAL;
	size = resource_size(res);
	phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);

	if (!phy_dwc3->base) {
		dev_err(phy_dwc3->dev, "failed to map reg\n");
		return -ENOMEM;
	}

	phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
	if (IS_ERR(phy_dwc3->ref_clk)) {
		dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
		return PTR_ERR(phy_dwc3->ref_clk);
	}

	clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);

	phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
	if (IS_ERR(phy_dwc3->xo_clk)) {
		dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
		phy_dwc3->xo_clk = NULL;
	}

	/* Parse device node to probe HSIO settings */
	if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
				     &phy_dwc3->rx_eq))
		phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;

	if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
				     &phy_dwc3->tx_deamp_3_5db))
		phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;

	if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
		phy_dwc3->mpll = SSPHY_MPLL_VALUE;

	generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);

	if (IS_ERR(generic_phy))
		return PTR_ERR(generic_phy);

	phy_set_drvdata(generic_phy, phy_dwc3);
	platform_set_drvdata(pdev, phy_dwc3);

	phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
						     of_phy_simple_xlate);

	if (IS_ERR(phy_provider))
		return PTR_ERR(phy_provider);

	return 0;
}

static struct platform_driver qcom_ipq806x_usb_phy_driver = {
	.probe		= qcom_ipq806x_usb_phy_probe,
	.driver		= {
		.name	= "qcom-ipq806x-usb-phy",
		.of_match_table = qcom_ipq806x_usb_phy_table,
	},
};

module_platform_driver(qcom_ipq806x_usb_phy_driver);

MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");