summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/xr_serial.c
blob: 0ca04906da4bf2b59f9bf0b2139f1402dfbd14e1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
// SPDX-License-Identifier: GPL-2.0+
/*
 * MaxLinear/Exar USB to Serial driver
 *
 * Copyright (c) 2020 Manivannan Sadhasivam <mani@kernel.org>
 *
 * Based on the initial driver written by Patong Yang:
 *
 *   https://lore.kernel.org/r/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop
 *
 *   Copyright (c) 2018 Patong Yang <patong.mxl@gmail.com>
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>

struct xr_txrx_clk_mask {
	u16 tx;
	u16 rx0;
	u16 rx1;
};

#define XR_INT_OSC_HZ			48000000U
#define XR21V141X_MIN_SPEED		46U
#define XR21V141X_MAX_SPEED		XR_INT_OSC_HZ

/* USB Requests */
#define XR21V141X_SET_REQ		0
#define XR21V141X_GET_REQ		1

#define XR21V141X_CLOCK_DIVISOR_0	0x04
#define XR21V141X_CLOCK_DIVISOR_1	0x05
#define XR21V141X_CLOCK_DIVISOR_2	0x06
#define XR21V141X_TX_CLOCK_MASK_0	0x07
#define XR21V141X_TX_CLOCK_MASK_1	0x08
#define XR21V141X_RX_CLOCK_MASK_0	0x09
#define XR21V141X_RX_CLOCK_MASK_1	0x0a

/* XR21V141X register blocks */
#define XR21V141X_UART_REG_BLOCK	0
#define XR21V141X_UM_REG_BLOCK		4
#define XR21V141X_UART_CUSTOM_BLOCK	0x66

/* XR21V141X UART Manager Registers */
#define XR21V141X_UM_FIFO_ENABLE_REG	0x10
#define XR21V141X_UM_ENABLE_TX_FIFO	0x01
#define XR21V141X_UM_ENABLE_RX_FIFO	0x02

#define XR21V141X_UM_RX_FIFO_RESET	0x18
#define XR21V141X_UM_TX_FIFO_RESET	0x1c

#define XR21V141X_UART_ENABLE_TX	0x1
#define XR21V141X_UART_ENABLE_RX	0x2

#define XR21V141X_UART_MODE_RI		BIT(0)
#define XR21V141X_UART_MODE_CD		BIT(1)
#define XR21V141X_UART_MODE_DSR		BIT(2)
#define XR21V141X_UART_MODE_DTR		BIT(3)
#define XR21V141X_UART_MODE_CTS		BIT(4)
#define XR21V141X_UART_MODE_RTS		BIT(5)

#define XR21V141X_UART_BREAK_ON		0xff
#define XR21V141X_UART_BREAK_OFF	0

#define XR21V141X_UART_DATA_MASK	GENMASK(3, 0)
#define XR21V141X_UART_DATA_7		0x7
#define XR21V141X_UART_DATA_8		0x8

#define XR21V141X_UART_PARITY_MASK	GENMASK(6, 4)
#define XR21V141X_UART_PARITY_SHIFT	4
#define XR21V141X_UART_PARITY_NONE	(0x0 << XR21V141X_UART_PARITY_SHIFT)
#define XR21V141X_UART_PARITY_ODD	(0x1 << XR21V141X_UART_PARITY_SHIFT)
#define XR21V141X_UART_PARITY_EVEN	(0x2 << XR21V141X_UART_PARITY_SHIFT)
#define XR21V141X_UART_PARITY_MARK	(0x3 << XR21V141X_UART_PARITY_SHIFT)
#define XR21V141X_UART_PARITY_SPACE	(0x4 << XR21V141X_UART_PARITY_SHIFT)

#define XR21V141X_UART_STOP_MASK	BIT(7)
#define XR21V141X_UART_STOP_SHIFT	7
#define XR21V141X_UART_STOP_1		(0x0 << XR21V141X_UART_STOP_SHIFT)
#define XR21V141X_UART_STOP_2		(0x1 << XR21V141X_UART_STOP_SHIFT)

#define XR21V141X_UART_FLOW_MODE_NONE	0x0
#define XR21V141X_UART_FLOW_MODE_HW	0x1
#define XR21V141X_UART_FLOW_MODE_SW	0x2

#define XR21V141X_UART_MODE_GPIO_MASK	GENMASK(2, 0)
#define XR21V141X_UART_MODE_RTS_CTS	0x1
#define XR21V141X_UART_MODE_DTR_DSR	0x2
#define XR21V141X_UART_MODE_RS485	0x3
#define XR21V141X_UART_MODE_RS485_ADDR	0x4

#define XR21V141X_REG_ENABLE		0x03
#define XR21V141X_REG_FORMAT		0x0b
#define XR21V141X_REG_FLOW_CTRL		0x0c
#define XR21V141X_REG_XON_CHAR		0x10
#define XR21V141X_REG_XOFF_CHAR		0x11
#define XR21V141X_REG_LOOPBACK		0x12
#define XR21V141X_REG_TX_BREAK		0x14
#define XR21V141X_REG_RS845_DELAY	0x15
#define XR21V141X_REG_GPIO_MODE		0x1a
#define XR21V141X_REG_GPIO_DIR		0x1b
#define XR21V141X_REG_GPIO_INT_MASK	0x1c
#define XR21V141X_REG_GPIO_SET		0x1d
#define XR21V141X_REG_GPIO_CLR		0x1e
#define XR21V141X_REG_GPIO_STATUS	0x1f

static int xr_set_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 val)
{
	struct usb_serial *serial = port->serial;
	int ret;

	ret = usb_control_msg(serial->dev,
			      usb_sndctrlpipe(serial->dev, 0),
			      XR21V141X_SET_REQ,
			      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
			      val, reg | (block << 8), NULL, 0,
			      USB_CTRL_SET_TIMEOUT);
	if (ret < 0) {
		dev_err(&port->dev, "Failed to set reg 0x%02x: %d\n", reg, ret);
		return ret;
	}

	return 0;
}

static int xr_get_reg(struct usb_serial_port *port, u8 block, u8 reg, u8 *val)
{
	struct usb_serial *serial = port->serial;
	u8 *dmabuf;
	int ret;

	dmabuf = kmalloc(1, GFP_KERNEL);
	if (!dmabuf)
		return -ENOMEM;

	ret = usb_control_msg(serial->dev,
			      usb_rcvctrlpipe(serial->dev, 0),
			      XR21V141X_GET_REQ,
			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
			      0, reg | (block << 8), dmabuf, 1,
			      USB_CTRL_GET_TIMEOUT);
	if (ret == 1) {
		*val = *dmabuf;
		ret = 0;
	} else {
		dev_err(&port->dev, "Failed to get reg 0x%02x: %d\n", reg, ret);
		if (ret >= 0)
			ret = -EIO;
	}

	kfree(dmabuf);

	return ret;
}

static int xr_set_reg_uart(struct usb_serial_port *port, u8 reg, u8 val)
{
	return xr_set_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
}

static int xr_get_reg_uart(struct usb_serial_port *port, u8 reg, u8 *val)
{
	return xr_get_reg(port, XR21V141X_UART_REG_BLOCK, reg, val);
}

static int xr_set_reg_um(struct usb_serial_port *port, u8 reg, u8 val)
{
	return xr_set_reg(port, XR21V141X_UM_REG_BLOCK, reg, val);
}

/*
 * According to datasheet, below is the recommended sequence for enabling UART
 * module in XR21V141X:
 *
 * Enable Tx FIFO
 * Enable Tx and Rx
 * Enable Rx FIFO
 */
static int xr_uart_enable(struct usb_serial_port *port)
{
	int ret;

	ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
			    XR21V141X_UM_ENABLE_TX_FIFO);
	if (ret)
		return ret;

	ret = xr_set_reg_uart(port, XR21V141X_REG_ENABLE,
			      XR21V141X_UART_ENABLE_TX | XR21V141X_UART_ENABLE_RX);
	if (ret)
		return ret;

	ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG,
			    XR21V141X_UM_ENABLE_TX_FIFO | XR21V141X_UM_ENABLE_RX_FIFO);

	if (ret)
		xr_set_reg_uart(port, XR21V141X_REG_ENABLE, 0);

	return ret;
}

static int xr_uart_disable(struct usb_serial_port *port)
{
	int ret;

	ret = xr_set_reg_uart(port, XR21V141X_REG_ENABLE, 0);
	if (ret)
		return ret;

	ret = xr_set_reg_um(port, XR21V141X_UM_FIFO_ENABLE_REG, 0);

	return ret;
}

static int xr_tiocmget(struct tty_struct *tty)
{
	struct usb_serial_port *port = tty->driver_data;
	u8 status;
	int ret;

	ret = xr_get_reg_uart(port, XR21V141X_REG_GPIO_STATUS, &status);
	if (ret)
		return ret;

	/*
	 * Modem control pins are active low, so reading '0' means it is active
	 * and '1' means not active.
	 */
	ret = ((status & XR21V141X_UART_MODE_DTR) ? 0 : TIOCM_DTR) |
	      ((status & XR21V141X_UART_MODE_RTS) ? 0 : TIOCM_RTS) |
	      ((status & XR21V141X_UART_MODE_CTS) ? 0 : TIOCM_CTS) |
	      ((status & XR21V141X_UART_MODE_DSR) ? 0 : TIOCM_DSR) |
	      ((status & XR21V141X_UART_MODE_RI) ? 0 : TIOCM_RI) |
	      ((status & XR21V141X_UART_MODE_CD) ? 0 : TIOCM_CD);

	return ret;
}

static int xr_tiocmset_port(struct usb_serial_port *port,
			    unsigned int set, unsigned int clear)
{
	u8 gpio_set = 0;
	u8 gpio_clr = 0;
	int ret = 0;

	/* Modem control pins are active low, so set & clr are swapped */
	if (set & TIOCM_RTS)
		gpio_clr |= XR21V141X_UART_MODE_RTS;
	if (set & TIOCM_DTR)
		gpio_clr |= XR21V141X_UART_MODE_DTR;
	if (clear & TIOCM_RTS)
		gpio_set |= XR21V141X_UART_MODE_RTS;
	if (clear & TIOCM_DTR)
		gpio_set |= XR21V141X_UART_MODE_DTR;

	/* Writing '0' to gpio_{set/clr} bits has no effect, so no need to do */
	if (gpio_clr)
		ret = xr_set_reg_uart(port, XR21V141X_REG_GPIO_CLR, gpio_clr);

	if (gpio_set)
		ret = xr_set_reg_uart(port, XR21V141X_REG_GPIO_SET, gpio_set);

	return ret;
}

static int xr_tiocmset(struct tty_struct *tty,
		       unsigned int set, unsigned int clear)
{
	struct usb_serial_port *port = tty->driver_data;

	return xr_tiocmset_port(port, set, clear);
}

static void xr_dtr_rts(struct usb_serial_port *port, int on)
{
	if (on)
		xr_tiocmset_port(port, TIOCM_DTR | TIOCM_RTS, 0);
	else
		xr_tiocmset_port(port, 0, TIOCM_DTR | TIOCM_RTS);
}

static void xr_break_ctl(struct tty_struct *tty, int break_state)
{
	struct usb_serial_port *port = tty->driver_data;
	u8 state;

	if (break_state == 0)
		state = XR21V141X_UART_BREAK_OFF;
	else
		state = XR21V141X_UART_BREAK_ON;

	dev_dbg(&port->dev, "Turning break %s\n",
		state == XR21V141X_UART_BREAK_OFF ? "off" : "on");
	xr_set_reg_uart(port, XR21V141X_REG_TX_BREAK, state);
}

/* Tx and Rx clock mask values obtained from section 3.3.4 of datasheet */
static const struct xr_txrx_clk_mask xr21v141x_txrx_clk_masks[] = {
	{ 0x000, 0x000, 0x000 },
	{ 0x000, 0x000, 0x000 },
	{ 0x100, 0x000, 0x100 },
	{ 0x020, 0x400, 0x020 },
	{ 0x010, 0x100, 0x010 },
	{ 0x208, 0x040, 0x208 },
	{ 0x104, 0x820, 0x108 },
	{ 0x844, 0x210, 0x884 },
	{ 0x444, 0x110, 0x444 },
	{ 0x122, 0x888, 0x224 },
	{ 0x912, 0x448, 0x924 },
	{ 0x492, 0x248, 0x492 },
	{ 0x252, 0x928, 0x292 },
	{ 0x94a, 0x4a4, 0xa52 },
	{ 0x52a, 0xaa4, 0x54a },
	{ 0xaaa, 0x954, 0x4aa },
	{ 0xaaa, 0x554, 0xaaa },
	{ 0x555, 0xad4, 0x5aa },
	{ 0xb55, 0xab4, 0x55a },
	{ 0x6b5, 0x5ac, 0xb56 },
	{ 0x5b5, 0xd6c, 0x6d6 },
	{ 0xb6d, 0xb6a, 0xdb6 },
	{ 0x76d, 0x6da, 0xbb6 },
	{ 0xedd, 0xdda, 0x76e },
	{ 0xddd, 0xbba, 0xeee },
	{ 0x7bb, 0xf7a, 0xdde },
	{ 0xf7b, 0xef6, 0x7de },
	{ 0xdf7, 0xbf6, 0xf7e },
	{ 0x7f7, 0xfee, 0xefe },
	{ 0xfdf, 0xfbe, 0x7fe },
	{ 0xf7f, 0xefe, 0xffe },
	{ 0xfff, 0xffe, 0xffd },
};

static int xr_set_baudrate(struct tty_struct *tty,
			   struct usb_serial_port *port)
{
	u32 divisor, baud, idx;
	u16 tx_mask, rx_mask;
	int ret;

	baud = tty->termios.c_ospeed;
	if (!baud)
		return 0;

	baud = clamp(baud, XR21V141X_MIN_SPEED, XR21V141X_MAX_SPEED);
	divisor = XR_INT_OSC_HZ / baud;
	idx = ((32 * XR_INT_OSC_HZ) / baud) & 0x1f;
	tx_mask = xr21v141x_txrx_clk_masks[idx].tx;

	if (divisor & 0x01)
		rx_mask = xr21v141x_txrx_clk_masks[idx].rx1;
	else
		rx_mask = xr21v141x_txrx_clk_masks[idx].rx0;

	dev_dbg(&port->dev, "Setting baud rate: %u\n", baud);
	/*
	 * XR21V141X uses fractional baud rate generator with 48MHz internal
	 * oscillator and 19-bit programmable divisor. So theoretically it can
	 * generate most commonly used baud rates with high accuracy.
	 */
	ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_0,
			      divisor & 0xff);
	if (ret)
		return ret;

	ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_1,
			      (divisor >>  8) & 0xff);
	if (ret)
		return ret;

	ret = xr_set_reg_uart(port, XR21V141X_CLOCK_DIVISOR_2,
			      (divisor >> 16) & 0xff);
	if (ret)
		return ret;

	ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_0,
			      tx_mask & 0xff);
	if (ret)
		return ret;

	ret = xr_set_reg_uart(port, XR21V141X_TX_CLOCK_MASK_1,
			      (tx_mask >>  8) & 0xff);
	if (ret)
		return ret;

	ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_0,
			      rx_mask & 0xff);
	if (ret)
		return ret;

	ret = xr_set_reg_uart(port, XR21V141X_RX_CLOCK_MASK_1,
			      (rx_mask >>  8) & 0xff);
	if (ret)
		return ret;

	tty_encode_baud_rate(tty, baud, baud);

	return 0;
}

static void xr_set_flow_mode(struct tty_struct *tty,
			     struct usb_serial_port *port,
			     struct ktermios *old_termios)
{
	u8 flow, gpio_mode;
	int ret;

	ret = xr_get_reg_uart(port, XR21V141X_REG_GPIO_MODE, &gpio_mode);
	if (ret)
		return;

	/* Set GPIO mode for controlling the pins manually by default. */
	gpio_mode &= ~XR21V141X_UART_MODE_GPIO_MASK;

	if (C_CRTSCTS(tty) && C_BAUD(tty) != B0) {
		dev_dbg(&port->dev, "Enabling hardware flow ctrl\n");
		gpio_mode |= XR21V141X_UART_MODE_RTS_CTS;
		flow = XR21V141X_UART_FLOW_MODE_HW;
	} else if (I_IXON(tty)) {
		u8 start_char = START_CHAR(tty);
		u8 stop_char = STOP_CHAR(tty);

		dev_dbg(&port->dev, "Enabling sw flow ctrl\n");
		flow = XR21V141X_UART_FLOW_MODE_SW;

		xr_set_reg_uart(port, XR21V141X_REG_XON_CHAR, start_char);
		xr_set_reg_uart(port, XR21V141X_REG_XOFF_CHAR, stop_char);
	} else {
		dev_dbg(&port->dev, "Disabling flow ctrl\n");
		flow = XR21V141X_UART_FLOW_MODE_NONE;
	}

	/*
	 * As per the datasheet, UART needs to be disabled while writing to
	 * FLOW_CONTROL register.
	 */
	xr_uart_disable(port);
	xr_set_reg_uart(port, XR21V141X_REG_FLOW_CTRL, flow);
	xr_uart_enable(port);

	xr_set_reg_uart(port, XR21V141X_REG_GPIO_MODE, gpio_mode);

	if (C_BAUD(tty) == B0)
		xr_dtr_rts(port, 0);
	else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
		xr_dtr_rts(port, 1);
}

static void xr_set_termios(struct tty_struct *tty,
			   struct usb_serial_port *port,
			   struct ktermios *old_termios)
{
	struct ktermios *termios = &tty->termios;
	u8 bits = 0;
	int ret;

	if (!old_termios || (tty->termios.c_ospeed != old_termios->c_ospeed))
		xr_set_baudrate(tty, port);

	switch (C_CSIZE(tty)) {
	case CS5:
	case CS6:
		/* CS5 and CS6 are not supported, so just restore old setting */
		termios->c_cflag &= ~CSIZE;
		if (old_termios)
			termios->c_cflag |= old_termios->c_cflag & CSIZE;
		else
			bits |= XR21V141X_UART_DATA_8;
		break;
	case CS7:
		bits |= XR21V141X_UART_DATA_7;
		break;
	case CS8:
	default:
		bits |= XR21V141X_UART_DATA_8;
		break;
	}

	if (C_PARENB(tty)) {
		if (C_CMSPAR(tty)) {
			if (C_PARODD(tty))
				bits |= XR21V141X_UART_PARITY_MARK;
			else
				bits |= XR21V141X_UART_PARITY_SPACE;
		} else {
			if (C_PARODD(tty))
				bits |= XR21V141X_UART_PARITY_ODD;
			else
				bits |= XR21V141X_UART_PARITY_EVEN;
		}
	}

	if (C_CSTOPB(tty))
		bits |= XR21V141X_UART_STOP_2;
	else
		bits |= XR21V141X_UART_STOP_1;

	ret = xr_set_reg_uart(port, XR21V141X_REG_FORMAT, bits);
	if (ret)
		return;

	xr_set_flow_mode(tty, port, old_termios);
}

static int xr_open(struct tty_struct *tty, struct usb_serial_port *port)
{
	u8 gpio_dir;
	int ret;

	ret = xr_uart_enable(port);
	if (ret) {
		dev_err(&port->dev, "Failed to enable UART\n");
		return ret;
	}

	/*
	 * Configure DTR and RTS as outputs and RI, CD, DSR and CTS as
	 * inputs.
	 */
	gpio_dir = XR21V141X_UART_MODE_DTR | XR21V141X_UART_MODE_RTS;
	xr_set_reg_uart(port, XR21V141X_REG_GPIO_DIR, gpio_dir);

	/* Setup termios */
	if (tty)
		xr_set_termios(tty, port, NULL);

	ret = usb_serial_generic_open(tty, port);
	if (ret) {
		xr_uart_disable(port);
		return ret;
	}

	return 0;
}

static void xr_close(struct usb_serial_port *port)
{
	usb_serial_generic_close(port);

	xr_uart_disable(port);
}

static int xr_probe(struct usb_serial *serial, const struct usb_device_id *id)
{
	/* Don't bind to control interface */
	if (serial->interface->cur_altsetting->desc.bInterfaceNumber == 0)
		return -ENODEV;

	return 0;
}

static const struct usb_device_id id_table[] = {
	{ USB_DEVICE(0x04e2, 0x1410) }, /* XR21V141X */
	{ }
};
MODULE_DEVICE_TABLE(usb, id_table);

static struct usb_serial_driver xr_device = {
	.driver = {
		.owner = THIS_MODULE,
		.name =	"xr_serial",
	},
	.id_table		= id_table,
	.num_ports		= 1,
	.probe			= xr_probe,
	.open			= xr_open,
	.close			= xr_close,
	.break_ctl		= xr_break_ctl,
	.set_termios		= xr_set_termios,
	.tiocmget		= xr_tiocmget,
	.tiocmset		= xr_tiocmset,
	.dtr_rts		= xr_dtr_rts
};

static struct usb_serial_driver * const serial_drivers[] = {
	&xr_device, NULL
};

module_usb_serial_driver(serial_drivers, id_table);

MODULE_AUTHOR("Manivannan Sadhasivam <mani@kernel.org>");
MODULE_DESCRIPTION("MaxLinear/Exar USB to Serial driver");
MODULE_LICENSE("GPL");