summaryrefslogtreecommitdiff
path: root/include/sound/cs8427.h
blob: 38b730bd5cf6f9f590aa2698b6a31f5f77aedbb8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
/* SPDX-License-Identifier: GPL-2.0-or-later */
#ifndef __SOUND_CS8427_H
#define __SOUND_CS8427_H

/*
 *  Routines for Cirrus Logic CS8427
 *  Copyright (c) by Jaroslav Kysela <perex@perex.cz>,
 */

#include <sound/i2c.h>

#define CS8427_BASE_ADDR	0x10	/* base I2C address */

#define CS8427_REG_AUTOINC	0x80	/* flag - autoincrement */
#define CS8427_REG_CONTROL1	0x01
#define CS8427_REG_CONTROL2	0x02
#define CS8427_REG_DATAFLOW	0x03
#define CS8427_REG_CLOCKSOURCE	0x04
#define CS8427_REG_SERIALINPUT	0x05
#define CS8427_REG_SERIALOUTPUT	0x06
#define CS8427_REG_INT1STATUS	0x07
#define CS8427_REG_INT2STATUS	0x08
#define CS8427_REG_INT1MASK	0x09
#define CS8427_REG_INT1MODEMSB	0x0a
#define CS8427_REG_INT1MODELSB	0x0b
#define CS8427_REG_INT2MASK	0x0c
#define CS8427_REG_INT2MODEMSB	0x0d
#define CS8427_REG_INT2MODELSB	0x0e
#define CS8427_REG_RECVCSDATA	0x0f
#define CS8427_REG_RECVERRORS	0x10
#define CS8427_REG_RECVERRMASK	0x11
#define CS8427_REG_CSDATABUF	0x12
#define CS8427_REG_UDATABUF	0x13
#define CS8427_REG_QSUBCODE	0x14	/* 0x14-0x1d (10 bytes) */
#define CS8427_REG_OMCKRMCKRATIO 0x1e
#define CS8427_REG_CORU_DATABUF	0x20	/* 24 byte buffer area */
#define CS8427_REG_ID_AND_VER	0x7f

/* CS8427_REG_CONTROL1 bits */
#define CS8427_SWCLK		(1<<7)	/* 0 = RMCK default, 1 = OMCK output on RMCK pin */
#define CS8427_VSET		(1<<6)	/* 0 = valid PCM data, 1 = invalid PCM data */
#define CS8427_MUTESAO		(1<<5)	/* mute control for the serial audio output port, 0 = disabled, 1 = enabled */
#define CS8427_MUTEAES		(1<<4)	/* mute control for the AES transmitter output, 0 = disabled, 1 = enabled */
#define CS8427_INTMASK		(3<<1)	/* interrupt output pin setup mask */
#define CS8427_INTACTHIGH	(0<<1)	/* active high */
#define CS8427_INTACTLOW	(1<<1)	/* active low */
#define CS8427_INTOPENDRAIN	(2<<1)	/* open drain, active low */
#define CS8427_TCBLDIR		(1<<0)	/* 0 = TCBL is an input, 1 = TCBL is an output */

/* CS8427_REQ_CONTROL2 bits */
#define CS8427_HOLDMASK		(3<<5)	/* action when a receiver error occurs */
#define CS8427_HOLDLASTSAMPLE	(0<<5)	/* hold the last valid sample */
#define CS8427_HOLDZERO		(1<<5)	/* replace the current audio sample with zero (mute) */
#define CS8427_HOLDNOCHANGE	(2<<5)	/* do not change the received audio sample */
#define CS8427_RMCKF		(1<<4)	/* 0 = 256*Fsi, 1 = 128*Fsi */
#define CS8427_MMR		(1<<3)	/* AES3 receiver operation, 0 = stereo, 1 = mono */
#define CS8427_MMT		(1<<2)	/* AES3 transmitter operation, 0 = stereo, 1 = mono */
#define CS8427_MMTCS		(1<<1)	/* 0 = use A + B CS data, 1 = use MMTLR CS data */
#define CS8427_MMTLR		(1<<0)	/* 0 = use A CS data, 1 = use B CS data */

/* CS8427_REG_DATAFLOW */
#define CS8427_TXOFF		(1<<6)	/* AES3 transmitter Output, 0 = normal operation, 1 = off (0V) */
#define CS8427_AESBP		(1<<5)	/* AES3 hardware bypass mode, 0 = normal, 1 = bypass (RX->TX) */
#define CS8427_TXDMASK		(3<<3)	/* AES3 Transmitter Data Source Mask */
#define CS8427_TXDSERIAL	(1<<3)	/* TXD - serial audio input port */
#define CS8427_TXAES3DRECEIVER	(2<<3)	/* TXD - AES3 receiver */
#define CS8427_SPDMASK		(3<<1)	/* Serial Audio Output Port Data Source Mask */
#define CS8427_SPDSERIAL	(1<<1)	/* SPD - serial audio input port */
#define CS8427_SPDAES3RECEIVER	(2<<1)	/* SPD - AES3 receiver */

/* CS8427_REG_CLOCKSOURCE */
#define CS8427_RUN		(1<<6)	/* 0 = clock off, 1 = clock on */
#define CS8427_CLKMASK		(3<<4)	/* OMCK frequency mask */
#define CS8427_CLK256		(0<<4)	/* 256*Fso */
#define CS8427_CLK384		(1<<4)	/* 384*Fso */
#define CS8427_CLK512		(2<<4)	/* 512*Fso */
#define CS8427_OUTC		(1<<3)	/* Output Time Base, 0 = OMCK, 1 = recovered input clock */
#define CS8427_INC		(1<<2)	/* Input Time Base Clock Source, 0 = recoverd input clock, 1 = OMCK input pin */
#define CS8427_RXDMASK		(3<<0)	/* Recovered Input Clock Source Mask */
#define CS8427_RXDILRCK		(0<<0)	/* 256*Fsi from ILRCK pin */
#define CS8427_RXDAES3INPUT	(1<<0)	/* 256*Fsi from AES3 input */
#define CS8427_EXTCLOCKRESET	(2<<0)	/* bypass PLL, 256*Fsi clock, synchronous reset */
#define CS8427_EXTCLOCK		(3<<0)	/* bypass PLL, 256*Fsi clock */

/* CS8427_REG_SERIALINPUT */
#define CS8427_SIMS		(1<<7)	/* 0 = slave, 1 = master mode */
#define CS8427_SISF		(1<<6)	/* ISCLK freq, 0 = 64*Fsi, 1 = 128*Fsi */
#define CS8427_SIRESMASK	(3<<4)	/* Resolution of the input data for right justified formats */
#define CS8427_SIRES24		(0<<4)	/* SIRES 24-bit */
#define CS8427_SIRES20		(1<<4)	/* SIRES 20-bit */
#define CS8427_SIRES16		(2<<4)	/* SIRES 16-bit */
#define CS8427_SIJUST		(1<<3)	/* Justification of SDIN data relative to ILRCK, 0 = left-justified, 1 = right-justified */
#define CS8427_SIDEL		(1<<2)	/* Delay of SDIN data relative to ILRCK for left-justified data formats, 0 = first ISCLK period, 1 = second ISCLK period */
#define CS8427_SISPOL		(1<<1)	/* ICLK clock polarity, 0 = rising edge of ISCLK, 1 = falling edge of ISCLK */
#define CS8427_SILRPOL		(1<<0)	/* ILRCK clock polarity, 0 = SDIN data left channel when ILRCK is high, 1 = SDIN right when ILRCK is high */

/* CS8427_REG_SERIALOUTPUT */
#define CS8427_SOMS		(1<<7)	/* 0 = slave, 1 = master mode */
#define CS8427_SOSF		(1<<6)	/* OSCLK freq, 0 = 64*Fso, 1 = 128*Fso */
#define CS8427_SORESMASK	(3<<4)	/* Resolution of the output data on SDOUT and AES3 output */
#define CS8427_SORES24		(0<<4)	/* SIRES 24-bit */
#define CS8427_SORES20		(1<<4)	/* SIRES 20-bit */
#define CS8427_SORES16		(2<<4)	/* SIRES 16-bit */
#define CS8427_SORESDIRECT	(2<<4)	/* SIRES direct copy from AES3 receiver */
#define CS8427_SOJUST		(1<<3)	/* Justification of SDOUT data relative to OLRCK, 0 = left-justified, 1 = right-justified */
#define CS8427_SODEL		(1<<2)	/* Delay of SDOUT data relative to OLRCK for left-justified data formats, 0 = first OSCLK period, 1 = second OSCLK period */
#define CS8427_SOSPOL		(1<<1)	/* OSCLK clock polarity, 0 = rising edge of ISCLK, 1 = falling edge of ISCLK */
#define CS8427_SOLRPOL		(1<<0)	/* OLRCK clock polarity, 0 = SDOUT data left channel when OLRCK is high, 1 = SDOUT right when OLRCK is high */

/* CS8427_REG_INT1STATUS */
#define CS8427_TSLIP		(1<<7)	/* AES3 transmitter source data slip interrupt */
#define CS8427_OSLIP		(1<<6)	/* Serial audio output port data slip interrupt */
#define CS8427_DETC		(1<<2)	/* D to E C-buffer transfer interrupt */
#define CS8427_EFTC		(1<<1)	/* E to F C-buffer transfer interrupt */
#define CS8427_RERR		(1<<0)	/* A receiver error has occurred */

/* CS8427_REG_INT2STATUS */
#define CS8427_DETU		(1<<3)	/* D to E U-buffer transfer interrupt */
#define CS8427_EFTU		(1<<2)	/* E to F U-buffer transfer interrupt */
#define CS8427_QCH		(1<<1)	/* A new block of Q-subcode data is available for reading */

/* CS8427_REG_INT1MODEMSB && CS8427_REG_INT1MODELSB */
/* bits are defined in CS8427_REG_INT1STATUS */
/* CS8427_REG_INT2MODEMSB && CS8427_REG_INT2MODELSB */
/* bits are defined in CS8427_REG_INT2STATUS */
#define CS8427_INTMODERISINGMSB	0
#define CS8427_INTMODERESINGLSB	0
#define CS8427_INTMODEFALLINGMSB 0
#define CS8427_INTMODEFALLINGLSB 1
#define CS8427_INTMODELEVELMSB	1
#define CS8427_INTMODELEVELLSB	0

/* CS8427_REG_RECVCSDATA */
#define CS8427_AUXMASK		(15<<4)	/* auxiliary data field width */
#define CS8427_AUXSHIFT		4
#define CS8427_PRO		(1<<3)	/* Channel status block format indicator */
#define CS8427_AUDIO		(1<<2)	/* Audio indicator (0 = audio, 1 = nonaudio */
#define CS8427_COPY		(1<<1)	/* 0 = copyright asserted, 1 = copyright not asserted */
#define CS8427_ORIG		(1<<0)	/* SCMS generation indicator, 0 = 1st generation or highter, 1 = original */

/* CS8427_REG_RECVERRORS */
/* CS8427_REG_RECVERRMASK for CS8427_RERR */
#define CS8427_QCRC		(1<<6)	/* Q-subcode data CRC error indicator */
#define CS8427_CCRC		(1<<5)	/* Chancnel Status Block Cyclick Redundancy Check Bit */
#define CS8427_UNLOCK		(1<<4)	/* PLL lock status bit */
#define CS8427_V		(1<<3)	/* 0 = valid data */
#define CS8427_CONF		(1<<2)	/* Confidence bit */
#define CS8427_BIP		(1<<1)	/* Bi-phase error bit */
#define CS8427_PAR		(1<<0)	/* Parity error */

/* CS8427_REG_CSDATABUF	*/
#define CS8427_BSEL		(1<<5)	/* 0 = CS data, 1 = U data */
#define CS8427_CBMR		(1<<4)	/* 0 = overwrite first 5 bytes for CS D to E buffer, 1 = prevent */
#define CS8427_DETCI		(1<<3)	/* D to E CS data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
#define CS8427_EFTCI		(1<<2)	/* E to F CS data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
#define CS8427_CAM		(1<<1)	/* CS data buffer control port access mode bit, 0 = one byte, 1 = two byte */
#define CS8427_CHS		(1<<0)	/* Channel select bit, 0 = Channel A, 1 = Channel B */

/* CS8427_REG_UDATABUF */
#define CS8427_UD		(1<<4)	/* User data pin (U) direction, 0 = input, 1 = output */
#define CS8427_UBMMASK		(3<<2)	/* Operating mode of the AES3 U bit manager */
#define CS8427_UBMZEROS		(0<<2)	/* transmit all zeros mode */
#define CS8427_UBMBLOCK		(1<<2)	/* block mode */
#define CS8427_DETUI		(1<<1)	/* D to E U-data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */
#define CS8427_EFTUI		(1<<1)	/* E to F U-data buffer transfer inhibit bit, 0 = allow, 1 = inhibit */

/* CS8427_REG_ID_AND_VER */
#define CS8427_IDMASK		(15<<4)
#define CS8427_IDSHIFT		4
#define CS8427_VERMASK		(15<<0)
#define CS8427_VERSHIFT		0
#define CS8427_VER8427A		0x71

struct snd_pcm_substream;

int snd_cs8427_init(struct snd_i2c_bus *bus, struct snd_i2c_device *device);
int snd_cs8427_create(struct snd_i2c_bus *bus, unsigned char addr,
		      unsigned int reset_timeout, struct snd_i2c_device **r_cs8427);
int snd_cs8427_reg_write(struct snd_i2c_device *device, unsigned char reg,
			 unsigned char val);
int snd_cs8427_iec958_build(struct snd_i2c_device *cs8427,
			    struct snd_pcm_substream *playback_substream,
			    struct snd_pcm_substream *capture_substream);
int snd_cs8427_iec958_active(struct snd_i2c_device *cs8427, int active);
int snd_cs8427_iec958_pcm(struct snd_i2c_device *cs8427, unsigned int rate);

#endif /* __SOUND_CS8427_H */