Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscHEADmaster

Pull Char/Misc/IIO/Binder updates from Greg KH:
 "Here is the big set of char/misc/iio and other driver subsystem
  changes for 6.18-rc1.

  Loads of different stuff in here, it was a busy development cycle in
  lots of different subsystems, with over 27k new lines added to the
  tree.

  Included in here are:

   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems

   - MEI driver updates and additions

   - NVMEM driver updates

   - slimbus removal for an unused driver and some other minor updates

   - coresight driver updates and additions

   - MHI driver updates

   - comedi driver updates and fixes

   - extcon driver updates

   - interconnect driver additions

   - eeprom driver updates and fixes

   - minor UIO driver updates

   - tiny W1 driver updates

  But the majority of new code is in the rust bindings and additions,
  which includes:

   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.

   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here. I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.

   - Android Binder driver implemented in Rust.

     This is the big one, and was driving a huge majority of the rust
     binding work over the past years. Right now there are two binder
     drivers in the kernel, selected only at build time as to which one
     to use as binder wants to be included in the system at boot time.

     The binder C maintainers all agreed on this, as eventually, they
     want the C code to be removed from the tree, but it will take a few
     releases to get there while both are maintained to ensure that the
     rust implementation is fully stable and compliant with the existing
     userspace apis.

  All of these have been in linux-next for a while"

* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
  rust: usb: keep usb::Device private for now
  rust: usb: don't retain device context for the interface parent
  USB: disable rust bindings from the build for now
  samples: rust: add a USB driver sample
  rust: usb: add basic USB abstractions
  coresight: Add label sysfs node support
  dt-bindings: arm: Add label in the coresight components
  coresight: tnoc: add new AMBA ID to support Trace Noc V2
  coresight: Fix incorrect handling for return value of devm_kzalloc
  coresight: tpda: fix the logic to setup the element size
  coresight: trbe: Return NULL pointer for allocation failures
  coresight: Refactor runtime PM
  coresight: Make clock sequence consistent
  coresight: Refactor driver data allocation
  coresight: Consolidate clock enabling
  coresight: Avoid enable programming clock duplicately
  coresight: Appropriately disable trace bus clocks
  coresight: Appropriately disable programming clocks
  coresight: etm4x: Support atclk
  coresight: catu: Support atclk
  ...

1 files changed, 302 insertions, 0 deletions

diff --git a/drivers/extcon/extcon-max14526.c b/drivers/extcon/extcon-max14526.c
new file mode 100644
index 000000000000..3750a5c20612
--- /dev/null
+++ b/drivers/extcon/extcon-max14526.c
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include <linux/device.h>
+#include <linux/devm-helpers.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/extcon-provider.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+/* I2C addresses of MUIC internal registers */
+#define MAX14526_DEVICE_ID	0x00
+#define MAX14526_ID		0x02
+
+/* CONTROL_1 register masks */
+#define MAX14526_CONTROL_1	0x01
+#define   ID_2P2		BIT(6)
+#define   ID_620		BIT(5)
+#define   ID_200		BIT(4)
+#define   VLDO			BIT(3)
+#define   SEMREN		BIT(2)
+#define   ADC_EN		BIT(1)
+#define   CP_EN			BIT(0)
+
+/* CONTROL_2 register masks */
+#define MAX14526_CONTROL_2	0x02
+#define   INTPOL		BIT(7)
+#define   INT_EN		BIT(6)
+#define   MIC_LP		BIT(5)
+#define   CP_AUD		BIT(4)
+#define   CHG_TYPE		BIT(1)
+#define   USB_DET_DIS		BIT(0)
+
+/* SW_CONTROL register masks */
+#define MAX14526_SW_CONTROL	0x03
+#define   SW_DATA		0x00
+#define   SW_UART		0x01
+#define   SW_AUDIO		0x02
+#define   SW_OPEN		0x07
+
+/* INT_STATUS register masks */
+#define MAX14526_INT_STAT	0x04
+#define   CHGDET		BIT(7)
+#define   MR_COMP		BIT(6)
+#define   SENDEND		BIT(5)
+#define   V_VBUS		BIT(4)
+
+/* STATUS register masks */
+#define MAX14526_STATUS		0x05
+#define   CPORT			BIT(7)
+#define   CHPORT		BIT(6)
+#define   C1COMP		BIT(0)
+
+enum max14526_idno_resistance {
+	MAX14526_GND,
+	MAX14526_24KOHM,
+	MAX14526_56KOHM,
+	MAX14526_100KOHM,
+	MAX14526_130KOHM,
+	MAX14526_180KOHM,
+	MAX14526_240KOHM,
+	MAX14526_330KOHM,
+	MAX14526_430KOHM,
+	MAX14526_620KOHM,
+	MAX14526_910KOHM,
+	MAX14526_OPEN
+};
+
+enum max14526_field_idx {
+	VENDOR_ID, CHIP_REV,		/* DEVID */
+	DM, DP,				/* SW_CONTROL */
+	MAX14526_N_REGMAP_FIELDS
+};
+
+static const struct reg_field max14526_reg_field[MAX14526_N_REGMAP_FIELDS] = {
+	[VENDOR_ID] = REG_FIELD(MAX14526_DEVICE_ID,  4, 7),
+	[CHIP_REV]  = REG_FIELD(MAX14526_DEVICE_ID,  0, 3),
+	[DM]        = REG_FIELD(MAX14526_SW_CONTROL, 0, 2),
+	[DP]        = REG_FIELD(MAX14526_SW_CONTROL, 3, 5),
+};
+
+struct max14526_data {
+	struct i2c_client *client;
+	struct extcon_dev *edev;
+
+	struct regmap *regmap;
+	struct regmap_field *rfield[MAX14526_N_REGMAP_FIELDS];
+
+	int last_state;
+	int cable;
+};
+
+enum max14526_muic_modes {
+	MAX14526_OTG     = MAX14526_GND, /* no power */
+	MAX14526_MHL     = MAX14526_56KOHM, /* no power */
+	MAX14526_OTG_Y   = MAX14526_GND | V_VBUS,
+	MAX14526_MHL_CHG = MAX14526_GND | V_VBUS | CHGDET,
+	MAX14526_NONE    = MAX14526_OPEN,
+	MAX14526_USB     = MAX14526_OPEN | V_VBUS,
+	MAX14526_CHG     = MAX14526_OPEN | V_VBUS | CHGDET,
+};
+
+static const unsigned int max14526_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_CHG_USB_FAST,
+	EXTCON_DISP_MHL,
+	EXTCON_NONE,
+};
+
+static int max14526_ap_usb_mode(struct max14526_data *priv)
+{
+	struct device *dev = &priv->client->dev;
+	int ret;
+
+	/* Enable USB Path */
+	ret = regmap_field_write(priv->rfield[DM], SW_DATA);
+	if (ret)
+		return ret;
+
+	ret = regmap_field_write(priv->rfield[DP], SW_DATA);
+	if (ret)
+		return ret;
+
+	/* Enable 200K, Charger Pump and ADC */
+	ret = regmap_write(priv->regmap, MAX14526_CONTROL_1,
+			   ID_200 | ADC_EN | CP_EN);
+	if (ret)
+		return ret;
+
+	dev_dbg(dev, "AP USB mode set\n");
+
+	return 0;
+}
+
+static irqreturn_t max14526_interrupt(int irq, void *dev_id)
+{
+	struct max14526_data *priv = dev_id;
+	struct device *dev = &priv->client->dev;
+	int state, ret;
+
+	/*
+	 * Upon an MUIC IRQ (MUIC_INT_N falls), wait at least 70ms
+	 * before reading INT_STAT and STATUS. After the reads,
+	 * MUIC_INT_N returns to high (but the INT_STAT and STATUS
+	 * contents will be held).
+	 */
+	msleep(100);
+
+	ret = regmap_read(priv->regmap, MAX14526_INT_STAT, &state);
+	if (ret)
+		dev_err(dev, "failed to read MUIC state %d\n", ret);
+
+	if (state == priv->last_state)
+		return IRQ_HANDLED;
+
+	/* Detach previous device */
+	extcon_set_state_sync(priv->edev, priv->cable, false);
+
+	switch (state) {
+	case MAX14526_USB:
+		priv->cable = EXTCON_USB;
+		break;
+
+	case MAX14526_CHG:
+		priv->cable = EXTCON_CHG_USB_FAST;
+		break;
+
+	case MAX14526_OTG:
+	case MAX14526_OTG_Y:
+		priv->cable = EXTCON_USB_HOST;
+		break;
+
+	case MAX14526_MHL:
+	case MAX14526_MHL_CHG:
+		priv->cable = EXTCON_DISP_MHL;
+		break;
+
+	case MAX14526_NONE:
+	default:
+		priv->cable = EXTCON_NONE;
+		break;
+	}
+
+	extcon_set_state_sync(priv->edev, priv->cable, true);
+
+	priv->last_state = state;
+
+	return IRQ_HANDLED;
+}
+
+static const struct regmap_config max14526_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MAX14526_STATUS,
+};
+
+static int max14526_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct max14526_data *priv;
+	int ret, dev_id, rev, i;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->client = client;
+	i2c_set_clientdata(client, priv);
+
+	priv->regmap = devm_regmap_init_i2c(client, &max14526_regmap_config);
+	if (IS_ERR(priv->regmap))
+		return dev_err_probe(dev, PTR_ERR(priv->regmap), "cannot allocate regmap\n");
+
+	for (i = 0; i < MAX14526_N_REGMAP_FIELDS; i++) {
+		priv->rfield[i] = devm_regmap_field_alloc(dev, priv->regmap,
+							  max14526_reg_field[i]);
+		if (IS_ERR(priv->rfield[i]))
+			return dev_err_probe(dev, PTR_ERR(priv->rfield[i]),
+					     "cannot allocate regmap field\n");
+	}
+
+	/* Detect if MUIC version is supported */
+	ret = regmap_field_read(priv->rfield[VENDOR_ID], &dev_id);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to read MUIC ID\n");
+
+	regmap_field_read(priv->rfield[CHIP_REV], &rev);
+
+	if (dev_id == MAX14526_ID)
+		dev_info(dev, "detected MAX14526 MUIC with id 0x%x, rev 0x%x\n", dev_id, rev);
+	else
+		dev_err_probe(dev, -EINVAL, "MUIC vendor id 0x%X is not recognized\n", dev_id);
+
+	priv->edev = devm_extcon_dev_allocate(dev, max14526_extcon_cable);
+	if (IS_ERR(priv->edev))
+		return dev_err_probe(dev, (IS_ERR(priv->edev)),
+				     "failed to allocate extcon device\n");
+
+	ret = devm_extcon_dev_register(dev, priv->edev);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "failed to register extcon device\n");
+
+	ret = max14526_ap_usb_mode(priv);
+	if (ret < 0)
+		return dev_err_probe(dev, ret, "failed to set AP USB mode\n");
+
+	regmap_write_bits(priv->regmap, MAX14526_CONTROL_2, INT_EN, INT_EN);
+	regmap_write_bits(priv->regmap, MAX14526_CONTROL_2, USB_DET_DIS, (u32)~USB_DET_DIS);
+
+	ret = devm_request_threaded_irq(dev, client->irq, NULL, &max14526_interrupt,
+					IRQF_ONESHOT | IRQF_SHARED, client->name, priv);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to register IRQ\n");
+
+	irq_wake_thread(client->irq, priv);
+
+	return 0;
+}
+
+static int max14526_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct max14526_data *priv = i2c_get_clientdata(client);
+
+	irq_wake_thread(client->irq, priv);
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(max14526_pm_ops, NULL, max14526_resume);
+
+static const struct of_device_id max14526_match[] = {
+	{ .compatible = "maxim,max14526" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max14526_match);
+
+static const struct i2c_device_id max14526_id[] = {
+	{ "max14526" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max14526_id);
+
+static struct i2c_driver max14526_driver = {
+	.driver = {
+		.name = "max14526",
+		.of_match_table = max14526_match,
+		.pm = &max14526_pm_ops,
+	},
+	.probe = max14526_probe,
+	.id_table = max14526_id,
+};
+module_i2c_driver(max14526_driver);
+
+MODULE_AUTHOR("Svyatoslav Ryhel <clamor95@gmail.com>");
+MODULE_DESCRIPTION("MAX14526 extcon driver to support MUIC");
+MODULE_LICENSE("GPL");