ice: reconfig host after changing MSI-X on VF

During VSI reconfiguration filters and VSI config which is set in ice_vf_init_host_cfg() are lost. Recall the host configuration function to restore them. Without this config VF on which MSI-X amount was changed might had a connection problems. Fixes: 4d38cb44bd32 ("ice: manage VFs MSI-X using resource tracking") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
author: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> 2024-02-23 07:40:24 +0100
committer: Tony Nguyen <anthony.l.nguyen@intel.com> 2024-03-01 09:40:11 -0800
commit: 4035c72dc1ba81a96f94de84dfd5409056c1d9c9 (patch)
tree: 1ae02b7949be73c4ede44f2f844ec7232c422e09 /include/vdso
parent: 99099c6bc75a30b76bb5d6774a0509ab6f06af05 (diff)
0 files changed, 0 insertions, 0 deletions
diff --git a/arch/arm/Kbuild b/arch/arm/Kbuild
new file mode 100644
index 000000000000..b506622e7e23
--- /dev/null
+++ b/arch/arm/Kbuild
@@ -0,0 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_FPE_NWFPE)		+= nwfpe/
+# Put arch/arm/fastfpe/ to use this.
+obj-$(CONFIG_FPE_FASTFPE)	+= $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/fastfpe/))
+obj-$(CONFIG_VFP)		+= vfp/
+obj-$(CONFIG_XEN)		+= xen/
+obj-$(CONFIG_VDSO)		+= vdso/
+obj-y				+= kernel/ mm/ common/
+obj-y				+= probes/
+obj-y				+= net/
+obj-y				+= crypto/
+
+# for cleaning
+subdir- += boot
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c5021002fe4..0fb4b218f665 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1,58 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0
 config ARM
 	bool
 	default y
-	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
+	select ARCH_32BIT_OFF_T
+	select ARCH_CORRECT_STACKTRACE_ON_KRETPROBE if HAVE_KRETPROBES && FRAME_POINTER && !ARM_UNWIND
+	select ARCH_HAS_BINFMT_FLAT
+	select ARCH_HAS_CURRENT_STACK_POINTER
+	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select ARCH_HAS_DMA_WRITE_COMBINE if !ARM_DMA_MEM_BUFFERABLE
 	select ARCH_HAS_ELF_RANDOMIZE
+	select ARCH_HAS_FORTIFY_SOURCE
+	select ARCH_HAS_KEEPINITRD
+	select ARCH_HAS_KCOV
+	select ARCH_HAS_MEMBARRIER_SYNC_CORE
+	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
+	select ARCH_HAS_SETUP_DMA_OPS
+	select ARCH_HAS_SET_MEMORY
+	select ARCH_STACKWALK
+	select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
+	select ARCH_HAS_STRICT_MODULE_RWX if MMU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
-	select ARCH_HAVE_CUSTOM_GPIO_H
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG if CPU_V7 || CPU_V7M || CPU_V6K
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_KEEP_MEMBLOCK
+	select ARCH_HAS_UBSAN_SANITIZE_ALL
 	select ARCH_MIGHT_HAVE_PC_PARPORT
+	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
+	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
 	select ARCH_SUPPORTS_ATOMIC_RMW
+	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
+	select ARCH_USE_MEMTEST
+	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
+	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select BUILDTIME_EXTABLE_SORT if MMU
+	select ARCH_WANT_LD_ORPHAN_WARN
+	select BINFMT_FLAT_ARGVP_ENVP_ON_STACK
+	select BUILDTIME_TABLE_SORT if MMU
+	select COMMON_CLK if !(ARCH_RPC || ARCH_FOOTBRIDGE)
 	select CLONE_BACKWARDS
-	select CPU_PM if (SUSPEND || CPU_IDLE)
+	select CPU_PM if SUSPEND || CPU_IDLE
 	select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select DMA_DECLARE_COHERENT
+	select DMA_GLOBAL_POOL if !MMU
+	select DMA_OPS
+	select DMA_NONCOHERENT_MMAP if MMU
 	select EDAC_SUPPORT
 	select EDAC_ATOMIC_SCRUB
 	select GENERIC_ALLOCATOR
-	select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
+	select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
+	select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select GENERIC_IRQ_IPI if SMP
+	select GENERIC_CPU_AUTOPROBE
+	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
+	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
+	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_STRNCPY_FROM_USER
-	select GENERIC_STRNLEN_USER
-	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
-	select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
+	select HAS_IOPORT
+	select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
 	select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
-	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32
-	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32
-	select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
+	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KFENCE if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
+	select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL
+	select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN
+	select HAVE_ARCH_MMAP_RND_BITS if MMU
+	select HAVE_ARCH_PFN_VALID
+	select HAVE_ARCH_SECCOMP
+	select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
+	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_BPF_JIT
-	select HAVE_CC_STACKPROTECTOR
-	select HAVE_CONTEXT_TRACKING
+	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if ARM_LPAE
+	select HAVE_ARM_SMCCC if CPU_V7
+	select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
+	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_C_RECORDMCOUNT
-	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_DMA_API_DEBUG
-	select HAVE_DMA_ATTRS
+	select HAVE_BUILDTIME_MCOUNT_SORT
+	select HAVE_DEBUG_KMEMLEAK if !XIP_KERNEL
 	select HAVE_DMA_CONTIGUOUS if MMU
-	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32
+	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
+	select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
-	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
-	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
-	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
-	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
-	select HAVE_IDE if PCI || ISA || PCMCIA
+	select HAVE_EXIT_THREAD
+	select HAVE_FAST_GUP if ARM_LPAE
+	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
+	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_TRACER
+	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_GCC_PLUGINS
+	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
@@ -60,27 +109,38 @@ config ARM
 	select HAVE_KERNEL_LZO
 	select HAVE_KERNEL_XZ
 	select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
-	select HAVE_KRETPROBES if (HAVE_KPROBES)
-	select HAVE_MEMBLOCK
+	select HAVE_KRETPROBES if HAVE_KPROBES
 	select HAVE_MOD_ARCH_SPECIFIC
-	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
+	select HAVE_NMI
 	select HAVE_OPTPROBES if !THUMB2_KERNEL
+	select HAVE_PCI if MMU
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
-	select HAVE_RCU_TABLE_FREE if (SMP && ARM_LPAE)
+	select MMU_GATHER_RCU_TABLE_FREE if SMP && ARM_LPAE
 	select HAVE_REGS_AND_STACK_ACCESS_API
+	select HAVE_RSEQ
+	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_UID16
 	select HAVE_VIRT_CPU_ACCOUNTING_GEN
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_REL
-	select NO_BOOTMEM
+	select NEED_DMA_MAP_STATE
+	select OF_EARLY_FLATTREE if OF
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select PCI_DOMAINS_GENERIC if PCI
+	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
+	select SPARSE_IRQ if !(ARCH_FOOTBRIDGE || ARCH_RPC)
 	select SYS_SUPPORTS_APM_EMULATION
+	select THREAD_INFO_IN_TASK
+	select TIMER_OF if OF
+	select HAVE_ARCH_VMAP_STACK if MMU && ARM_HAS_GROUP_RELOCS
+	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
+	select USE_OF if !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -91,16 +151,19 @@ config ARM
 	  Europe.  There is an ARM Linux project with a web page at
 	  <http://www.arm.linux.org.uk/>.
 
-config ARM_HAS_SG_CHAIN
-	select ARCH_HAS_SG_CHAIN
-	bool
-
-config NEED_SG_DMA_LENGTH
-	bool
+config ARM_HAS_GROUP_RELOCS
+	def_bool y
+	depends on !LD_IS_LLD || LLD_VERSION >= 140000
+	depends on !COMPILE_TEST
+	help
+	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
+	  relocations, which have been around for a long time, but were not
+	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
+	  which is usually sufficient, but not for allyesconfig, so we disable
+	  this feature when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
-	select ARM_HAS_SG_CHAIN
 	select NEED_SG_DMA_LENGTH
 
 if ARM_DMA_USE_IOMMU
@@ -124,9 +187,6 @@ config ARM_DMA_IOMMU_ALIGNMENT
 
 endif
 
-config MIGHT_HAVE_PCI
-	bool
-
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
@@ -140,21 +200,6 @@ config HAVE_PROC_CPU
 config NO_IOPORT_MAP
 	bool
 
-config EISA
-	bool
-	---help---
-	  The Extended Industry Standard Architecture (EISA) bus was
-	  developed as an open alternative to the IBM MicroChannel bus.
-
-	  The EISA bus provided some of the features of the IBM MicroChannel
-	  bus while maintaining backward compatibility with cards made for
-	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-	  1995 when it was made obsolete by the PCI bus.
-
-	  Say Y here if you are building a kernel for an EISA-based machine.
-
-	  Otherwise, say N.
-
 config SBUS
 	bool
 
@@ -162,23 +207,10 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
-config HAVE_LATENCYTOP_SUPPORT
-	bool
-	depends on !SMP
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default !CPU_V7M
-
-config RWSEM_XCHGADD_ALGORITHM
-	bool
-	default y
-
 config ARCH_HAS_ILOG2_U32
 	bool
 
@@ -188,6 +220,9 @@ config ARCH_HAS_ILOG2_U64
 config ARCH_HAS_BANDGAP
 	bool
 
+config FIX_EARLYCON_MEM
+	def_bool y if MMU
+
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -199,51 +234,29 @@ config GENERIC_CALIBRATE_DELAY
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
-config ZONE_DMA
-	bool
-
-config NEED_DMA_MAP_STATE
-       def_bool y
-
 config ARCH_SUPPORTS_UPROBES
 	def_bool y
 
-config ARCH_HAS_DMA_SET_COHERENT_MASK
-	bool
-
 config GENERIC_ISA_DMA
 	bool
 
 config FIQ
 	bool
 
-config NEED_RET_TO_USER
-	bool
-
 config ARCH_MTD_XIP
 	bool
 
-config VECTORS_BASE
-	hex
-	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
-	default DRAM_BASE if REMAP_VECTORS_TO_RAM
-	default 0x00000000
-	help
-	  The base address of exception vectors.  This must be two pages
-	  in size.
-
 config ARM_PATCH_PHYS_VIRT
 	bool "Patch physical to virtual translations at runtime" if EMBEDDED
 	default y
-	depends on !XIP_KERNEL && MMU
-	depends on !ARCH_REALVIEW || !SPARSEMEM
+	depends on MMU
 	help
 	  Patch phys-to-virt and virt-to-phys translation functions at
 	  boot and module load time according to the position of the
 	  kernel in system memory.
 
 	  This can only be used with non-XIP MMU kernels where the base
-	  of physical memory is at a 16MB boundary.
+	  of physical memory is at a 2 MiB boundary.
 
 	  Only disable this option if you know that you do not require
 	  this feature (eg, building a kernel for a single machine) and
@@ -265,22 +278,13 @@ config NEED_MACH_MEMORY_H
 
 config PHYS_OFFSET
 	hex "Physical address of main memory" if MMU
-	depends on !ARM_PATCH_PHYS_VIRT
+	depends on !ARM_PATCH_PHYS_VIRT || !AUTO_ZRELADDR
 	default DRAM_BASE if !MMU
-	default 0x00000000 if ARCH_EBSA110 || \
-			EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
-			ARCH_FOOTBRIDGE || \
-			ARCH_INTEGRATOR || \
-			ARCH_IOP13XX || \
-			ARCH_KS8695 || \
-			(ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET)
+	default 0x00000000 if ARCH_FOOTBRIDGE
 	default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
-	default 0x20000000 if ARCH_S5PV210
-	default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
-	default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
-	default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
-	default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
-	default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	default 0xa0000000 if ARCH_PXA
+	default 0xc0000000 if ARCH_EP93XX || ARCH_SA1100
+	default 0
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -294,10 +298,6 @@ config PGTABLE_LEVELS
 	default 3 if ARM_LPAE
 	default 2
 
-source "init/Kconfig"
-
-source "kernel/Kconfig.freezer"
-
 menu "System Type"
 
 config MMU
@@ -307,473 +307,53 @@ config MMU
 	  Select if you want MMU-based virtualised addressing space
 	  support by paged memory management. If unsure, say 'Y'.
 
-#
-# The "ARM system type" choice list is ordered alphabetically by option
-# text.  Please add new entries in the option alphabetic order.
-#
-choice
-	prompt "ARM system type"
-	default ARCH_VERSATILE if !MMU
-	default ARCH_MULTIPLATFORM if MMU
-
-config ARCH_MULTIPLATFORM
-	bool "Allow multiple platforms to be selected"
-	depends on MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_HAS_SG_CHAIN
-	select ARM_PATCH_PHYS_VIRT
-	select AUTO_ZRELADDR
-	select CLKSRC_OF
-	select COMMON_CLK
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select MULTI_IRQ_HANDLER
-	select SPARSE_IRQ
-	select USE_OF
-
 config ARM_SINGLE_ARMV7M
-	bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
-	depends on !MMU
-	select ARCH_WANT_OPTIONAL_GPIOLIB
+	def_bool !MMU
 	select ARM_NVIC
-	select AUTO_ZRELADDR
-	select CLKSRC_OF
-	select COMMON_CLK
 	select CPU_V7M
-	select GENERIC_CLOCKEVENTS
-	select NO_IOPORT_MAP
-	select SPARSE_IRQ
-	select USE_OF
-
-config ARCH_REALVIEW
-	bool "ARM Ltd. RealView family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select COMMON_CLK
-	select COMMON_CLK_VERSATILE
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PL061 if GPIOLIB
-	select ICST
-	select NEED_MACH_MEMORY_H
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_SCHED_CLOCK
-	help
-	  This enables support for ARM Ltd RealView boards.
-
-config ARCH_VERSATILE
-	bool "ARM Ltd. Versatile family"
-	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select ARM_AMBA
-	select ARM_TIMER_SP804
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	select HAVE_MACH_CLKDEV
-	select ICST
-	select PLAT_VERSATILE
-	select PLAT_VERSATILE_CLOCK
-	select PLAT_VERSATILE_SCHED_CLOCK
-	select VERSATILE_FPGA_IRQ
-	help
-	  This enables support for ARM Ltd Versatile board.
-
-config ARCH_CLPS711X
-	bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
-	select ARCH_REQUIRE_GPIOLIB
-	select AUTO_ZRELADDR
-	select CLKSRC_MMIO
-	select COMMON_CLK
-	select CPU_ARM720T
-	select GENERIC_CLOCKEVENTS
-	select MFD_SYSCON
-	select SOC_BUS
-	help
-	  Support for Cirrus Logic 711x/721x/731x based boards.
-
-config ARCH_GEMINI
-	bool "Cortina Systems Gemini"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
-	select CPU_FA526
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for the Cortina Systems Gemini family SoCs
-
-config ARCH_EBSA110
-	bool "EBSA-110"
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select ISA
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
 	select NO_IOPORT_MAP
-	help
-	  This is an evaluation board for the StrongARM processor available
-	  from Digital. It has limited hardware on-board, including an
-	  Ethernet interface, two PCMCIA sockets, two serial ports and a
-	  parallel port.
-
-config ARCH_EP93XX
-	bool "EP93xx-based"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_USES_GETTIMEOFFSET
-	select ARM_AMBA
-	select ARM_VIC
-	select CLKDEV_LOOKUP
-	select CPU_ARM920T
-	help
-	  This enables support for the Cirrus EP93xx series of CPUs.
-
-config ARCH_FOOTBRIDGE
-	bool "FootBridge"
-	select CPU_SA110
-	select FOOTBRIDGE
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select NEED_MACH_IO_H if !MMU
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for systems based on the DC21285 companion chip
-	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
-
-config ARCH_NETX
-	bool "Hilscher NetX based"
-	select ARM_VIC
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	help
-	  This enables support for systems based on the Hilscher NetX Soc
-
-config ARCH_IOP13XX
-	bool "IOP13xx-based"
-	depends on MMU
-	select CPU_XSC3
-	select NEED_MACH_MEMORY_H
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	select VMSPLIT_1G
-	select SPARSE_IRQ
-	help
-	  Support for Intel's IOP13XX (XScale) family of processors.
-
-config ARCH_IOP32X
-	bool "IOP32x-based"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_XSCALE
-	select GPIO_IOP
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's 80219 and IOP32X (XScale) family of
-	  processors.
-
-config ARCH_IOP33X
-	bool "IOP33x-based"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_XSCALE
-	select GPIO_IOP
-	select NEED_RET_TO_USER
-	select PCI
-	select PLAT_IOP
-	help
-	  Support for Intel's IOP33X (XScale) family of processors.
-
-config ARCH_IXP4XX
-	bool "IXP4xx-based"
-	depends on MMU
-	select ARCH_HAS_DMA_SET_COHERENT_MASK
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_SUPPORTS_BIG_ENDIAN
-	select CLKSRC_MMIO
-	select CPU_XSCALE
-	select DMABOUNCE if PCI
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select NEED_MACH_IO_H
-	select USB_EHCI_BIG_ENDIAN_DESC
-	select USB_EHCI_BIG_ENDIAN_MMIO
-	help
-	  Support for Intel's IXP4XX (XScale) family of processors.
-
-config ARCH_DOVE
-	bool "Marvell Dove"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_PJ4
-	select GENERIC_CLOCKEVENTS
-	select MIGHT_HAVE_PCI
-	select MVEBU_MBUS
-	select PINCTRL
-	select PINCTRL_DOVE
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the Marvell Dove SoC 88AP510
-
-config ARCH_MV78XX0
-	bool "Marvell MV78xx0"
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell MV78xx0 series SoCs:
-	  MV781x0, MV782x0.
-
-config ARCH_ORION5X
-	bool "Marvell Orion"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CPU_FEROCEON
-	select GENERIC_CLOCKEVENTS
-	select MVEBU_MBUS
-	select PCI
-	select PLAT_ORION_LEGACY
-	help
-	  Support for the following Marvell Orion 5x series SoCs:
-	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
-	  Orion-2 (5281), Orion-1-90 (6183).
-
-config ARCH_MMP
-	bool "Marvell PXA168/910/MMP2"
-	depends on MMU
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PINCTRL
-	select PLAT_PXA
-	select SPARSE_IRQ
-	help
-	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
-
-config ARCH_KS8695
-	bool "Micrel/Kendin KS8695"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKSRC_MMIO
-	select CPU_ARM922T
-	select GENERIC_CLOCKEVENTS
-	select NEED_MACH_MEMORY_H
-	help
-	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
-	  System-on-Chip devices.
 
-config ARCH_W90X900
-	bool "Nuvoton W90X900 CPU"
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
-	  At present, the w90x900 has been renamed nuc900, regarding
-	  the ARM series product line, you can login the following
-	  link address to know more.
-
-	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
-		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
+config ARCH_MMAP_RND_BITS_MIN
+	default 8
 
-config ARCH_LPC32XX
-	bool "NXP LPC32XX"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select USE_OF
-	help
-	  Support for the NXP LPC32XX family of processors
+config ARCH_MMAP_RND_BITS_MAX
+	default 14 if PAGE_OFFSET=0x40000000
+	default 15 if PAGE_OFFSET=0x80000000
+	default 16
 
-config ARCH_PXA
-	bool "PXA2xx/PXA3xx-based"
-	depends on MMU
-	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_CPU_SUSPEND if PM
-	select AUTO_ZRELADDR
-	select COMMON_CLK
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CLKSRC_OF
-	select GENERIC_CLOCKEVENTS
-	select GPIO_PXA
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select PLAT_PXA
-	select SPARSE_IRQ
+config ARCH_MULTIPLATFORM
+	bool "Require kernel to be portable to multiple machines" if EXPERT
+	depends on MMU && !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	default y
 	help
-	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
+	  In general, all Arm machines can be supported in a single
+	  kernel image, covering either Armv4/v5 or Armv6/v7.
 
-config ARCH_SHMOBILE_LEGACY
-	bool "Renesas ARM SoCs (non-multiplatform)"
-	select ARCH_SHMOBILE
-	select ARM_PATCH_PHYS_VIRT if MMU
-	select CLKDEV_LOOKUP
-	select CPU_V7
-	select GENERIC_CLOCKEVENTS
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select MIGHT_HAVE_CACHE_L2X0
-	select MULTI_IRQ_HANDLER
-	select NO_IOPORT_MAP
-	select PINCTRL
-	select PM_GENERIC_DOMAINS if PM
-	select SH_CLK_CPG
-	select SPARSE_IRQ
-	help
-	  Support for Renesas ARM SoC platforms using a non-multiplatform
-	  kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
-	  and RZ families.
-
-config ARCH_RPC
-	bool "RiscPC"
-	select ARCH_ACORN
-	select ARCH_MAY_HAVE_PC_FDC
-	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_USES_GETTIMEOFFSET
-	select CPU_SA110
-	select FIQ
-	select HAVE_IDE
-	select HAVE_PATA_PLATFORM
-	select ISA_DMA_API
-	select NEED_MACH_IO_H
-	select NEED_MACH_MEMORY_H
-	select NO_IOPORT_MAP
-	select VIRT_TO_BUS
-	help
-	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
-	  CD-ROM interface, serial and parallel port, and the floppy drive.
+	  However, some configuration options require hardcoding machine
+	  specific physical addresses or enable errata workarounds that may
+	  break other machines.
 
-config ARCH_SA1100
-	bool "SA1100-based"
-	select ARCH_MTD_XIP
-	select ARCH_REQUIRE_GPIOLIB
-	select ARCH_SPARSEMEM_ENABLE
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select CPU_FREQ
-	select CPU_SA1100
-	select GENERIC_CLOCKEVENTS
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select ISA
-	select MULTI_IRQ_HANDLER
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for StrongARM 11x0 based boards.
-
-config ARCH_S3C24XX
-	bool "Samsung S3C24XX SoCs"
-	select ARCH_REQUIRE_GPIOLIB
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_S3C_RTC if RTC_CLASS
-	select MULTI_IRQ_HANDLER
-	select NEED_MACH_IO_H
-	select SAMSUNG_ATAGS
-	help
-	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
-	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
-	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
-	  Samsung SMDK2410 development board (and derivatives).
-
-config ARCH_S3C64XX
-	bool "Samsung S3C64XX"
-	select ARCH_REQUIRE_GPIOLIB
-	select ARM_AMBA
-	select ARM_VIC
-	select ATAGS
-	select CLKDEV_LOOKUP
-	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK_SAMSUNG
-	select CPU_V6K
-	select GENERIC_CLOCKEVENTS
-	select GPIO_SAMSUNG
-	select HAVE_S3C2410_I2C if I2C
-	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select HAVE_TCM
-	select NO_IOPORT_MAP
-	select PLAT_SAMSUNG
-	select PM_GENERIC_DOMAINS if PM
-	select S3C_DEV_NAND
-	select S3C_GPIO_TRACK
-	select SAMSUNG_ATAGS
-	select SAMSUNG_WAKEMASK
-	select SAMSUNG_WDT_RESET
-	help
-	  Samsung S3C64XX series based systems
-
-config ARCH_DAVINCI
-	bool "TI DaVinci"
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select GENERIC_ALLOCATOR
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select HAVE_IDE
-	select TI_PRIV_EDMA
-	select USE_OF
-	select ZONE_DMA
-	help
-	  Support for TI's DaVinci platform.
+	  Selecting N here allows using those options, including
+	  DEBUG_UNCOMPRESS, XIP_KERNEL and ZBOOT_ROM. If unsure, say Y.
 
-config ARCH_OMAP1
-	bool "TI OMAP1"
+menu "Platform selection"
 	depends on MMU
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select HAVE_IDE
-	select IRQ_DOMAIN
-	select MULTI_IRQ_HANDLER
-	select NEED_MACH_IO_H if PCCARD
-	select NEED_MACH_MEMORY_H
-	select SPARSE_IRQ
-	help
-	  Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
-
-endchoice
-
-menu "Multiple platform selection"
-	depends on ARCH_MULTIPLATFORM
 
 comment "CPU Core family selection"
 
 config ARCH_MULTI_V4
-	bool "ARMv4 based platforms (FA526)"
+	bool "ARMv4 based platforms (FA526, StrongARM)"
 	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
 	select ARCH_MULTI_V4_V5
-	select CPU_FA526
+	select CPU_FA526 if !(CPU_SA110 || CPU_SA1100)
 
 config ARCH_MULTI_V4T
 	bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
 	depends on !ARCH_MULTI_V6_V7
+	# https://github.com/llvm/llvm-project/issues/50764
+	depends on !LD_IS_LLD || LLD_VERSION >= 160000
 	select ARCH_MULTI_V4_V5
 	select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
 		CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
@@ -813,23 +393,42 @@ config ARCH_MULTI_CPU_AUTO
 endmenu
 
 config ARCH_VIRT
-	bool "Dummy Virtual Machine" if ARCH_MULTI_V7
+	bool "Dummy Virtual Machine"
+	depends on ARCH_MULTI_V7
 	select ARM_AMBA
 	select ARM_GIC
+	select ARM_GIC_V2M if PCI
+	select ARM_GIC_V3
+	select ARM_GIC_V3_ITS if PCI
 	select ARM_PSCI
 	select HAVE_ARM_ARCH_TIMER
 
+config ARCH_AIROHA
+	bool "Airoha SoC Support"
+	depends on ARCH_MULTI_V7
+	select ARM_AMBA
+	select ARM_GIC
+	select ARM_GIC_V3
+	select ARM_PSCI
+	select HAVE_ARM_ARCH_TIMER
+	help
+	  Support for Airoha EN7523 SoCs
+
 #
 # This is sorted alphabetically by mach-* pathname.  However, plat-*
 # Kconfigs may be included either alphabetically (according to the
 # plat- suffix) or along side the corresponding mach-* source.
 #
-source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/mach-actions/Kconfig"
 
 source "arch/arm/mach-alpine/Kconfig"
 
+source "arch/arm/mach-artpec/Kconfig"
+
 source "arch/arm/mach-asm9260/Kconfig"
 
+source "arch/arm/mach-aspeed/Kconfig"
+
 source "arch/arm/mach-at91/Kconfig"
 
 source "arch/arm/mach-axxia/Kconfig"
@@ -840,8 +439,6 @@ source "arch/arm/mach-berlin/Kconfig"
 
 source "arch/arm/mach-clps711x/Kconfig"
 
-source "arch/arm/mach-cns3xxx/Kconfig"
-
 source "arch/arm/mach-davinci/Kconfig"
 
 source "arch/arm/mach-digicolor/Kconfig"
@@ -850,6 +447,8 @@ source "arch/arm/mach-dove/Kconfig"
 
 source "arch/arm/mach-ep93xx/Kconfig"
 
+source "arch/arm/mach-exynos/Kconfig"
+
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
@@ -858,39 +457,39 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-integrator/Kconfig"
-
-source "arch/arm/mach-iop32x/Kconfig"
+source "arch/arm/mach-hpe/Kconfig"
 
-source "arch/arm/mach-iop33x/Kconfig"
-
-source "arch/arm/mach-iop13xx/Kconfig"
+source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
 
 source "arch/arm/mach-keystone/Kconfig"
 
-source "arch/arm/mach-ks8695/Kconfig"
+source "arch/arm/mach-lpc32xx/Kconfig"
+
+source "arch/arm/mach-mediatek/Kconfig"
 
 source "arch/arm/mach-meson/Kconfig"
 
+source "arch/arm/mach-milbeaut/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
+
 source "arch/arm/mach-moxart/Kconfig"
 
-source "arch/arm/mach-mv78xx0/Kconfig"
+source "arch/arm/mach-mstar/Kconfig"
 
-source "arch/arm/mach-imx/Kconfig"
+source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-mediatek/Kconfig"
+source "arch/arm/mach-mvebu/Kconfig"
 
 source "arch/arm/mach-mxs/Kconfig"
 
-source "arch/arm/mach-netx/Kconfig"
-
 source "arch/arm/mach-nomadik/Kconfig"
 
-source "arch/arm/mach-nspire/Kconfig"
+source "arch/arm/mach-npcm/Kconfig"
 
-source "arch/arm/plat-omap/Kconfig"
+source "arch/arm/mach-nspire/Kconfig"
 
 source "arch/arm/mach-omap1/Kconfig"
 
@@ -898,72 +497,51 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-picoxcell/Kconfig"
-
 source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
-
-source "arch/arm/mach-mmp/Kconfig"
 
 source "arch/arm/mach-qcom/Kconfig"
 
-source "arch/arm/mach-realview/Kconfig"
+source "arch/arm/mach-rda/Kconfig"
+
+source "arch/arm/mach-realtek/Kconfig"
+
+source "arch/arm/mach-rpc/Kconfig"
 
 source "arch/arm/mach-rockchip/Kconfig"
 
+source "arch/arm/mach-s3c/Kconfig"
+
+source "arch/arm/mach-s5pv210/Kconfig"
+
 source "arch/arm/mach-sa1100/Kconfig"
 
+source "arch/arm/mach-shmobile/Kconfig"
+
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/mach-spear/Kconfig"
 
 source "arch/arm/mach-sti/Kconfig"
 
-source "arch/arm/mach-s3c24xx/Kconfig"
-
-source "arch/arm/mach-s3c64xx/Kconfig"
-
-source "arch/arm/mach-s5pv210/Kconfig"
-
-source "arch/arm/mach-exynos/Kconfig"
-source "arch/arm/plat-samsung/Kconfig"
+source "arch/arm/mach-stm32/Kconfig"
 
-source "arch/arm/mach-shmobile/Kconfig"
+source "arch/arm/mach-sunplus/Kconfig"
 
 source "arch/arm/mach-sunxi/Kconfig"
 
-source "arch/arm/mach-prima2/Kconfig"
-
 source "arch/arm/mach-tegra/Kconfig"
 
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-uniphier/Kconfig"
 
 source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-vexpress/Kconfig"
-source "arch/arm/plat-versatile/Kconfig"
-
 source "arch/arm/mach-vt8500/Kconfig"
 
-source "arch/arm/mach-w90x900/Kconfig"
-
-source "arch/arm/mach-zx/Kconfig"
-
 source "arch/arm/mach-zynq/Kconfig"
 
 # ARMv7-M architecture
-config ARCH_EFM32
-	bool "Energy Micro efm32"
-	depends on ARM_SINGLE_ARMV7M
-	select ARCH_REQUIRE_GPIOLIB
-	help
-	  Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
-	  processors.
-
 config ARCH_LPC18XX
 	bool "NXP LPC18xx/LPC43xx"
 	depends on ARM_SINGLE_ARMV7M
@@ -975,28 +553,25 @@ config ARCH_LPC18XX
 	  Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
 	  high performance microcontrollers.
 
-config ARCH_STM32
-	bool "STMicrolectronics STM32"
+config ARCH_MPS2
+	bool "ARM MPS2 platform"
 	depends on ARM_SINGLE_ARMV7M
-	select ARCH_HAS_RESET_CONTROLLER
-	select ARMV7M_SYSTICK
-	select CLKSRC_STM32
-	select RESET_CONTROLLER
+	select ARM_AMBA
+	select CLKSRC_MPS2
 	help
-	  Support for STMicroelectronics STM32 processors.
+	  Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
+	  with a range of available cores like Cortex-M3/M4/M7.
+
+	  Please, note that depends which Application Note is used memory map
+	  for the platform may vary, so adjustment of RAM base might be needed.
 
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
 
-config PLAT_IOP
-	bool
-	select GENERIC_CLOCKEVENTS
-
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
-	select COMMON_CLK
 	select GENERIC_IRQ_CHIP
 	select IRQ_DOMAIN
 
@@ -1004,15 +579,10 @@ config PLAT_ORION_LEGACY
 	bool
 	select PLAT_ORION
 
-config PLAT_PXA
-	bool
-
 config PLAT_VERSATILE
 	bool
 
-source "arch/arm/firmware/Kconfig"
-
-source arch/arm/mm/Kconfig
+source "arch/arm/mm/Kconfig"
 
 config IWMMXT
 	bool "Enable iWMMXt support"
@@ -1022,11 +592,6 @@ config IWMMXT
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
 
-config MULTI_IRQ_HANDLER
-	bool
-	help
-	  Allow each machine to specify it's own IRQ handler at run time.
-
 if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
@@ -1091,7 +656,9 @@ config ARM_ERRATA_458693
 	  hazard might then cause a processor deadlock. The workaround enables
 	  the L1 caching of the NEON accesses and disables the PLD instruction
 	  in the ACTLR register. Note that setting specific bits in the ACTLR
-	  register may not be available in non-secure mode.
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_460075
 	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
@@ -1104,7 +671,9 @@ config ARM_ERRATA_460075
 	  and overwritten with stale memory contents from external memory. The
 	  workaround disables the write-allocate mode for the L2 cache via the
 	  ACTLR register. Note that setting specific bits in the ACTLR register
-	  may not be available in non-secure mode.
+	  may not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_742230
 	bool "ARM errata: DMB operation may be faulty"
@@ -1117,7 +686,10 @@ config ARM_ERRATA_742230
 	  ordering of the two writes. This workaround sets a specific bit in
 	  the diagnostic register of the Cortex-A9 which causes the DMB
 	  instruction to behave as a DSB, ensuring the correct behaviour of
-	  the two writes.
+	  the two writes. Note that setting specific bits in the diagnostics
+	  register may not be available in non-secure mode and thus is not
+	  available on a multiplatform kernel. This should be applied by the
+	  bootloader instead.
 
 config ARM_ERRATA_742231
 	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
@@ -1132,7 +704,10 @@ config ARM_ERRATA_742231
 	  replaced from one of the CPUs at the same time as another CPU is
 	  accessing it. This workaround sets specific bits in the diagnostic
 	  register of the Cortex-A9 which reduces the linefill issuing
-	  capabilities of the processor.
+	  capabilities of the processor. Note that setting specific bits in the
+	  diagnostics register may not be available in non-secure mode and thus
+	  is not available on a multiplatform kernel. This should be applied by
+	  the bootloader instead.
 
 config ARM_ERRATA_643719
 	bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
@@ -1169,7 +744,9 @@ config ARM_ERRATA_743622
 	  register of the Cortex-A9 which disables the Store Buffer
 	  optimisation, preventing the defect from occurring. This has no
 	  visible impact on the overall performance or power consumption of the
-	  processor.
+	  processor. Note that setting specific bits in the diagnostics register
+	  may not be available in non-secure mode and thus is not available on a
+	  multiplatform kernel. This should be applied by the bootloader instead.
 
 config ARM_ERRATA_751472
 	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
@@ -1181,6 +758,10 @@ config ARM_ERRATA_751472
 	  completion of a following broadcasted operation if the second
 	  operation is received by a CPU before the ICIALLUIS has completed,
 	  potentially leading to corrupted entries in the cache or TLB.
+	  Note that setting specific bits in the diagnostics register may
+	  not be available in non-secure mode and thus is not available on
+	  a multiplatform kernel. This should be applied by the bootloader
+	  instead.
 
 config ARM_ERRATA_754322
 	bool "ARM errata: possible faulty MMU translations following an ASID switch"
@@ -1230,12 +811,23 @@ config ARM_ERRATA_764369
 	  relevant cache maintenance functions and sets a specific bit
 	  in the diagnostic control register of the SCU.
 
+config ARM_ERRATA_764319
+	bool "ARM errata: Read to DBGPRSR and DBGOSLSR may generate Undefined instruction"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 764319 Cortex A-9 erratum.
+	  CP14 read accesses to the DBGPRSR and DBGOSLSR registers generate an
+	  unexpected Undefined Instruction exception when the DBGSWENABLE
+	  external pin is set to 0, even when the CP14 accesses are performed
+	  from a privileged mode. This work around catches the exception in a
+	  way the kernel does not stop execution.
+
 config ARM_ERRATA_775420
        bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
        depends on CPU_V7
        help
 	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
-	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a data cache maintenance
 	 operation aborts with MMU exception, it might cause the processor
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
@@ -1259,6 +851,78 @@ config ARM_ERRATA_773022
 	  loop buffer may deliver incorrect instructions. This
 	  workaround disables the loop buffer to avoid the erratum.
 
+config ARM_ERRATA_818325_852422
+	bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM
+	    instruction might deadlock.  Fixed in r0p1.
+	  - Cortex-A12 852422: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A12 cores yet.
+	  This workaround for all both errata involves setting bit[12] of the
+	  Feature Register. This bit disables an optimisation applied to a
+	  sequence of 2 instructions that use opposing condition codes.
+
+config ARM_ERRATA_821420
+	bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 821420 Cortex-A12
+	  (all revs) erratum. In very rare timing conditions, a sequence
+	  of VMOV to Core registers instructions, for which the second
+	  one is in the shadow of a branch or abort, can lead to a
+	  deadlock when the VMOV instructions are issued out-of-order.
+
+config ARM_ERRATA_825619
+	bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 825619 Cortex-A12
+	  (all revs) erratum. Within rare timing constraints, executing a
+	  DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable
+	  and Device/Strongly-Ordered loads and stores might cause deadlock
+
+config ARM_ERRATA_857271
+	bool "ARM errata: A12: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857271 Cortex-A12
+	  (all revs) erratum. Under very rare timing conditions, the CPU might
+	  hang. The workaround is expected to have a < 1% performance impact.
+
+config ARM_ERRATA_852421
+	bool "ARM errata: A17: DMB ST might fail to create order between stores"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 852421 Cortex-A17
+	  (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions,
+	  execution of a DMB ST instruction might fail to properly order
+	  stores from GroupA and stores from GroupB.
+
+config ARM_ERRATA_852423
+	bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for:
+	  - Cortex-A17 852423: Execution of a sequence of instructions might
+	    lead to either a data corruption or a CPU deadlock.  Not fixed in
+	    any Cortex-A17 cores yet.
+	  This is identical to Cortex-A12 erratum 852422.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
+config ARM_ERRATA_857272
+	bool "ARM errata: A17: CPU might deadlock under some very rare internal conditions"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 857272 Cortex-A17 erratum.
+	  This erratum is not known to be fixed in any A17 revision.
+	  This is identical to Cortex-A12 erratum 857271.  It is a separate
+	  config option from the A12 erratum due to the way errata are checked
+	  for and handled.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1274,49 +938,21 @@ config ISA
 	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 	  newer boards don't support it.  If you have ISA, say Y, otherwise N.
 
-# Select ISA DMA controller support
-config ISA_DMA
-	bool
-	select ISA_DMA_API
-
 # Select ISA DMA interface
 config ISA_DMA_API
 	bool
 
-config PCI
-	bool "PCI support" if MIGHT_HAVE_PCI
-	help
-	  Find out whether you have a PCI motherboard. PCI is the name of a
-	  bus system, i.e. the way the CPU talks to the other stuff inside
-	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
-	  VESA. If you have PCI, say Y, otherwise N.
-
-config PCI_DOMAINS
-	bool
-	depends on PCI
-
-config PCI_DOMAINS_GENERIC
-	def_bool PCI_DOMAINS
-
-config PCI_NANOENGINE
-	bool "BSE nanoEngine PCI support"
-	depends on SA1100_NANOENGINE
+config ARM_ERRATA_814220
+	bool "ARM errata: Cache maintenance by set/way operations can execute out of order"
+	depends on CPU_V7
 	help
-	  Enable PCI on the BSE nanoEngine board.
-
-config PCI_SYSCALL
-	def_bool PCI
-
-config PCI_HOST_ITE8152
-	bool
-	depends on PCI && MACH_ARMCORE
-	default y
-	select DMABOUNCE
-
-source "drivers/pci/Kconfig"
-source "drivers/pci/pcie/Kconfig"
-
-source "drivers/pcmcia/Kconfig"
+	  The v7 ARM states that all cache and branch predictor maintenance
+	  operations that do not specify an address execute, relative to
+	  each other, in program order.
+	  However, because of this erratum, an L2 set/way cache maintenance
+	  operation can overtake an L1 set/way cache maintenance operation.
+	  This ERRATA only affected the Cortex-A7 and present in r0p2, r0p3,
+	  r0p4, r0p5.
 
 endmenu
 
@@ -1334,7 +970,6 @@ config HAVE_SMP
 config SMP
 	bool "Symmetric Multi-Processing"
 	depends on CPU_V6K || CPU_V7
-	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU || ARM_MPU
 	select IRQ_WORK
@@ -1349,15 +984,15 @@ config SMP
 	  uniprocessor machines. On a uniprocessor machine, the kernel
 	  will run faster if you say N here.
 
-	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
-	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
+	  See also <file:Documentation/arch/x86/i386/IO-APIC.rst>,
+	  <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO available at
 	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
 
 	  If you don't know what to do here, say N.
 
 config SMP_ON_UP
 	bool "Allow booting SMP kernel on uniprocessor systems"
-	depends on SMP && !XIP_KERNEL && MMU
+	depends on SMP && MMU
 	default y
 	help
 	  SMP kernels contain instructions which fail on non-SMP processors.
@@ -1367,6 +1002,16 @@ config SMP_ON_UP
 
 	  If you don't know what to do here, say Y.
 
+
+config CURRENT_POINTER_IN_TPIDRURO
+	def_bool y
+	depends on CPU_32v6K && !CPU_V6
+
+config IRQSTACKS
+	def_bool y
+	select HAVE_IRQ_EXIT_ON_IRQ_STACK
+	select HAVE_SOFTIRQ_ON_OWN_STACK
+
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
@@ -1395,20 +1040,17 @@ config SCHED_SMT
 config HAVE_ARM_SCU
 	bool
 	help
-	  This option enables support for the ARM system coherency unit
+	  This option enables support for the ARM snoop control unit
 
 config HAVE_ARM_ARCH_TIMER
 	bool "Architected timer support"
 	depends on CPU_V7
 	select ARM_ARCH_TIMER
-	select GENERIC_CLOCKEVENTS
 	help
 	  This option enables support for the ARM architected timer
 
 config HAVE_ARM_TWD
 	bool
-	depends on SMP
-	select CLKSRC_OF if OF
 	help
 	  This options enables support for the ARM timer and watchdog unit
 
@@ -1439,8 +1081,7 @@ config BIG_LITTLE
 
 config BL_SWITCHER
 	bool "big.LITTLE switcher support"
-	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU
-	select ARM_CPU_SUSPEND
+	depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
 	select CPU_PM
 	help
 	  The big.LITTLE "switcher" provides the core functionality to
@@ -1467,6 +1108,9 @@ choice
 
 	config VMSPLIT_3G
 		bool "3G/1G user/kernel split"
+	config VMSPLIT_3G_OPT
+		depends on !ARM_LPAE
+		bool "3G/1G user/kernel split (for full 1G low memory)"
 	config VMSPLIT_2G
 		bool "2G/2G user/kernel split"
 	config VMSPLIT_1G
@@ -1478,24 +1122,42 @@ config PAGE_OFFSET
 	default PHYS_OFFSET if !MMU
 	default 0x40000000 if VMSPLIT_1G
 	default 0x80000000 if VMSPLIT_2G
+	default 0xB0000000 if VMSPLIT_3G_OPT
 	default 0xC0000000
 
+config KASAN_SHADOW_OFFSET
+	hex
+	depends on KASAN
+	default 0x1f000000 if PAGE_OFFSET=0x40000000
+	default 0x5f000000 if PAGE_OFFSET=0x80000000
+	default 0x9f000000 if PAGE_OFFSET=0xC0000000
+	default 0x8f000000 if PAGE_OFFSET=0xB0000000
+	default 0xffffffff
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
-	range 2 32
+	range 2 16 if DEBUG_KMAP_LOCAL
+	range 2 32 if !DEBUG_KMAP_LOCAL
 	depends on SMP
 	default "4"
+	help
+	  The maximum number of CPUs that the kernel can support.
+	  Up to 32 CPUs can be supported, or up to 16 if kmap_local()
+	  debugging is enabled, which uses half of the per-CPU fixmap
+	  slots as guard regions.
 
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
+	select GENERIC_IRQ_MIGRATION
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.
 
 config ARM_PSCI
 	bool "Support for the ARM Power State Coordination Interface (PSCI)"
-	depends on CPU_V7
+	depends on HAVE_ARM_SMCCC
+	select ARM_PSCI_FW
 	help
 	  Say Y here if you want Linux to communicate with system firmware
 	  implementing the PSCI specification for CPU-centric power
@@ -1503,34 +1165,9 @@ config ARM_PSCI
 	  0022A ("Power State Coordination Interface System Software on
 	  ARM processors").
 
-# The GPIO number here must be sorted by descending number. In case of
-# a multiplatform kernel, we just want the highest value required by the
-# selected platforms.
-config ARCH_NR_GPIO
-	int
-	default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
-		ARCH_ZYNQ
-	default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
-		SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
-	default 416 if ARCH_SUNXI
-	default 392 if ARCH_U8500
-	default 352 if ARCH_VT8500
-	default 288 if ARCH_ROCKCHIP
-	default 264 if MACH_H4700
-	default 0
-	help
-	  Maximum number of GPIOs in the system.
-
-	  If unsure, leave the default value.
-
-source kernel/Kconfig.preempt
-
 config HZ_FIXED
 	int
-	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
-		ARCH_S5PV210 || ARCH_EXYNOS4
 	default 128 if SOC_AT91RM9200
-	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
 	default 0
 
 choice
@@ -1574,52 +1211,35 @@ config THUMB2_KERNEL
 	bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
 	depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
 	default y if CPU_THUMBONLY
-	select AEABI
-	select ARM_ASM_UNIFIED
 	select ARM_UNWIND
 	help
 	  By enabling this option, the kernel will be compiled in
-	  Thumb-2 mode. A compiler/assembler that understand the unified
-	  ARM-Thumb syntax is needed.
+	  Thumb-2 mode.
 
 	  If unsure, say N.
 
-config THUMB2_AVOID_R_ARM_THM_JUMP11
-	bool "Work around buggy Thumb-2 short branch relocations in gas"
-	depends on THUMB2_KERNEL && MODULES
+config ARM_PATCH_IDIV
+	bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
+	depends on CPU_32v7
 	default y
 	help
-	  Various binutils versions can resolve Thumb-2 branches to
-	  locally-defined, preemptible global symbols as short-range "b.n"
-	  branch instructions.
-
-	  This is a problem, because there's no guarantee the final
-	  destination of the symbol, or any candidate locations for a
-	  trampoline, are within range of the branch.  For this reason, the
-	  kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
-	  relocation in modules at all, and it makes little sense to add
-	  support.
-
-	  The symptom is that the kernel fails with an "unsupported
-	  relocation" error when loading some modules.
-
-	  Until fixed tools are available, passing
-	  -fno-optimize-sibling-calls to gcc should prevent gcc generating
-	  code which hits this problem, at the cost of a bit of extra runtime
-	  stack usage in some cases.
+	  The ARM compiler inserts calls to __aeabi_idiv() and
+	  __aeabi_uidiv() when it needs to perform division on signed
+	  and unsigned integers. Some v7 CPUs have support for the sdiv
+	  and udiv instructions that can be used to implement those
+	  functions.
 
-	  The problem is described in more detail at:
-	      https://bugs.launchpad.net/binutils-linaro/+bug/725126
-
-	  Only Thumb-2 kernels are affected.
-
-	  Unless you are sure your tools don't have this problem, say Y.
-
-config ARM_ASM_UNIFIED
-	bool
+	  Enabling this option allows the kernel to modify itself to
+	  replace the first two instructions of these library functions
+	  with the sdiv or udiv plus "bx lr" instructions when the CPU
+	  it is running on supports them. Typically this will be faster
+	  and less power intensive than running the original library
+	  code to do integer division.
 
 config AEABI
-	bool "Use the ARM EABI to compile the kernel"
+	bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && \
+		!CPU_V7M && !CPU_V6 && !CPU_V6K && !CC_IS_CLANG
+	default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K || CC_IS_CLANG
 	help
 	  This option allows for the kernel to be compiled using the latest
 	  ARM ABI (aka EABI).  This is only useful if you are using a user
@@ -1654,28 +1274,21 @@ config OABI_COMPAT
 	  UNPREDICTABLE (in fact it can be predicted that it won't work
 	  at all). If in doubt say N.
 
-config ARCH_HAS_HOLES_MEMORYMODEL
-	bool
-
-config ARCH_SPARSEMEM_ENABLE
-	bool
-
-config ARCH_SPARSEMEM_DEFAULT
-	def_bool ARCH_SPARSEMEM_ENABLE
-
 config ARCH_SELECT_MEMORY_MODEL
-	def_bool ARCH_SPARSEMEM_ENABLE
+	def_bool y
 
-config HAVE_ARCH_PFN_VALID
-	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
+config ARCH_FLATMEM_ENABLE
+	def_bool !(ARCH_RPC || ARCH_SA1100)
 
-config HAVE_GENERIC_RCU_GUP
-	def_bool y
-	depends on ARM_LPAE
+config ARCH_SPARSEMEM_ENABLE
+	def_bool !ARCH_FOOTBRIDGE
+	select SPARSEMEM_STATIC if SPARSEMEM
 
 config HIGHMEM
 	bool "High Memory Support"
 	depends on MMU
+	select KMAP_LOCAL
+	select KMAP_LOCAL_NON_LINEAR_PTE_ARRAY
 	help
 	  The address space of ARM processors is only 4 Gigabytes large
 	  and it has to accommodate user address space, kernel address
@@ -1691,8 +1304,9 @@ config HIGHMEM
 	  If unsure, say n.
 
 config HIGHPTE
-	bool "Allocate 2nd-level pagetables from highmem"
+	bool "Allocate 2nd-level pagetables from highmem" if EXPERT
 	depends on HIGHMEM
+	default y
 	help
 	  The VM uses one page of physical memory for each page table.
 	  For systems with a lot of processes, this can use a lot of
@@ -1700,28 +1314,30 @@ config HIGHPTE
 	  consumed by page tables.  Setting this option will allow
 	  user-space 2nd level page tables to reside in high memory.
 
-config HW_PERF_EVENTS
-	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS
+config CPU_SW_DOMAIN_PAN
+	bool "Enable use of CPU domains to implement privileged no-access"
+	depends on MMU && !ARM_LPAE
 	default y
 	help
-	  Enable hardware performance counter support for perf events. If
-	  disabled, perf events will use software events only.
-
-config SYS_SUPPORTS_HUGETLBFS
-       def_bool y
-       depends on ARM_LPAE
+	  Increase kernel security by ensuring that normal kernel accesses
+	  are unable to access userspace addresses.  This can help prevent
+	  use-after-free bugs becoming an exploitable privilege escalation
+	  by ensuring that magic values (such as LIST_POISON) will always
+	  fault when dereferenced.
 
-config HAVE_ARCH_TRANSPARENT_HUGEPAGE
-       def_bool y
-       depends on ARM_LPAE
+	  CPUs with low-vector mappings use a best-efforts implementation.
+	  Their lower 1MB needs to remain accessible for the vectors, but
+	  the remainder of userspace will become appropriately inaccessible.
 
-config ARCH_WANT_GENERAL_HUGETLB
+config HW_PERF_EVENTS
 	def_bool y
+	depends on ARM_PMU
 
 config ARM_MODULE_PLTS
 	bool "Use PLTs to allow module memory to spill over into vmalloc area"
 	depends on MODULES
+	select KASAN_VMALLOC if KASAN
+	default y
 	help
 	  Allocate PLTs when loading modules so that jumps and calls whose
 	  targets are too far away for their relative offsets to be encoded
@@ -1732,31 +1348,26 @@ config ARM_MODULE_PLTS
 	  rounding up to page size, the actual memory footprint is usually
 	  the same.
 
-	  Say y if you are getting out of memory errors while loading modules
+	  Disabling this is usually safe for small single-platform
+	  configurations. If unsure, say y.
 
-source "mm/Kconfig"
-
-config FORCE_MAX_ZONEORDER
-	int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
-	range 11 64 if ARCH_SHMOBILE_LEGACY
-	default "12" if SOC_AM33XX
-	default "9" if SA1111 || ARCH_EFM32
-	default "11"
+config ARCH_FORCE_MAX_ORDER
+	int "Order of maximal physically contiguous allocations"
+	default "11" if SOC_AM33XX
+	default "8" if SA1111
+	default "10"
 	help
-	  The kernel memory allocator divides physically contiguous memory
-	  blocks into "zones", where each zone is a power of two number of
-	  pages.  This option selects the largest power of two that the kernel
-	  keeps in the memory allocator.  If you need to allocate very large
-	  blocks of physically contiguous memory, then you may need to
-	  increase this value.
+	  The kernel page allocator limits the size of maximal physically
+	  contiguous allocations. The limit is called MAX_ORDER and it
+	  defines the maximal power of two of number of pages that can be
+	  allocated as a single contiguous block. This option allows
+	  overriding the default setting when ability to allocate very
+	  large blocks of physically contiguous memory is required.
 
-	  This config option is actually maximum order plus one. For example,
-	  a value of 11 means that the largest free memory block is 2^10 pages.
+	  Don't change if unsure.
 
 config ALIGNMENT_TRAP
-	bool
-	depends on CPU_CP15_MMU
-	default y if !ARCH_EBSA110
+	def_bool CPU_CP15_MMU
 	select HAVE_PROC_CPU if PROC_FS
 	help
 	  ARM processors cannot fetch/store information which is not
@@ -1783,25 +1394,23 @@ config UACCESS_WITH_MEMCPY
 	  However, if the CPU data cache is using a write-allocate mode,
 	  this option is unlikely to provide any performance gain.
 
-config SECCOMP
-	bool
-	prompt "Enable seccomp to safely compute untrusted bytecode"
-	---help---
-	  This kernel feature is useful for number crunching applications
-	  that may need to compute untrusted bytecode during their
-	  execution. By using pipes or other transports made available to
-	  the process as file descriptors supporting the read/write
-	  syscalls, it's possible to isolate those applications in
-	  their own address space using seccomp. Once seccomp is
-	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
-	  and the task is only allowed to execute a few safe syscalls
-	  defined by each seccomp mode.
-
-config SWIOTLB
-	def_bool y
+config PARAVIRT
+	bool "Enable paravirtualization code"
+	help
+	  This changes the kernel so it can modify itself when it is run
+	  under a hypervisor, potentially improving performance significantly
+	  over full virtualization.
+
+config PARAVIRT_TIME_ACCOUNTING
+	bool "Paravirtual steal time accounting"
+	select PARAVIRT
+	help
+	  Select this option to enable fine granularity task steal time
+	  accounting. Time spent executing other tasks in parallel with
+	  the current vCPU is discounted from the vCPU power. To account for
+	  that, there can be a small performance impact.
 
-config IOMMU_HELPER
-	def_bool SWIOTLB
+	  If in doubt, say N here.
 
 config XEN_DOM0
 	def_bool y
@@ -1815,10 +1424,31 @@ config XEN
 	depends on MMU
 	select ARCH_DMA_ADDR_T_64BIT
 	select ARM_PSCI
+	select SWIOTLB
 	select SWIOTLB_XEN
+	select PARAVIRT
 	help
 	  Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
 
+config CC_HAVE_STACKPROTECTOR_TLS
+	def_bool $(cc-option,-mtp=cp15 -mstack-protector-guard=tls -mstack-protector-guard-offset=0)
+
+config STACKPROTECTOR_PER_TASK
+	bool "Use a unique stack canary value for each task"
+	depends on STACKPROTECTOR && CURRENT_POINTER_IN_TPIDRURO && !XIP_DEFLATED_DATA
+	depends on GCC_PLUGINS || CC_HAVE_STACKPROTECTOR_TLS
+	select GCC_PLUGIN_ARM_SSP_PER_TASK if !CC_HAVE_STACKPROTECTOR_TLS
+	default y
+	help
+	  Due to the fact that GCC uses an ordinary symbol reference from
+	  which to load the value of the stack canary, this value can only
+	  change at reboot time on SMP systems, and all tasks running in the
+	  kernel's address space are forced to use the same canary value for
+	  the entire duration that the system is up.
+
+	  Enable this option to switch to a different method that uses a
+	  different canary value for each task.
+
 endmenu
 
 menu "Boot options"
@@ -1827,20 +1457,17 @@ config USE_OF
 	bool "Flattened Device Tree support"
 	select IRQ_DOMAIN
 	select OF
-	select OF_EARLY_FLATTREE
-	select OF_RESERVED_MEM
 	help
 	  Include support for flattened device tree machine descriptions.
 
 config ATAGS
-	bool "Support for the traditional ATAGS boot data passing" if USE_OF
+	bool "Support for the traditional ATAGS boot data passing"
 	default y
 	help
 	  This is the traditional way of passing data to the kernel at boot
 	  time. If you are solely relying on the flattened device tree (or
 	  the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
-	  to remove ATAGS support from your kernel binary.  If unsure,
-	  leave this to y.
+	  to remove ATAGS support from your kernel binary.
 
 config DEPRECATED_PARAM_STRUCT
 	bool "Provide old way to pass kernel parameters"
@@ -1853,7 +1480,7 @@ config DEPRECATED_PARAM_STRUCT
 # TEXT and BSS so we preserve their values in the config files.
 config ZBOOT_ROM_TEXT
 	hex "Compressed ROM boot loader base address"
-	default "0"
+	default 0x0
 	help
 	  The physical address at which the ROM-able zImage is to be
 	  placed in the target.  Platforms which normally make use of
@@ -1864,7 +1491,7 @@ config ZBOOT_ROM_TEXT
 
 config ZBOOT_ROM_BSS
 	hex "Compressed ROM boot loader BSS address"
-	default "0"
+	default 0x0
 	help
 	  The base address of an area of read/write memory in the target
 	  for the ROM-able zImage which must be available while the
@@ -1938,7 +1565,7 @@ config CMDLINE
 	string "Default kernel command string"
 	default ""
 	help
-	  On some architectures (EBSA110 and CATS), there is currently no way
+	  On some architectures (e.g. CATS), there is currently no way
 	  for the boot loader to pass arguments to the kernel. For these
 	  architectures, you should supply some command-line options at build
 	  time by entering them here. As a minimum, you should specify the
@@ -1947,7 +1574,6 @@ config CMDLINE
 choice
 	prompt "Kernel command line type" if CMDLINE != ""
 	default CMDLINE_FROM_BOOTLOADER
-	depends on ATAGS
 
 config CMDLINE_FROM_BOOTLOADER
 	bool "Use bootloader kernel arguments if available"
@@ -1974,6 +1600,7 @@ endchoice
 config XIP_KERNEL
 	bool "Kernel Execute-In-Place from ROM"
 	depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
+	depends on !ARM_PATCH_IDIV && !ARM_PATCH_PHYS_VIRT && !SMP_ON_UP
 	help
 	  Execute-In-Place allows the kernel to run from non-volatile storage
 	  directly addressable by the CPU, such as NOR flash. This saves RAM
@@ -2001,10 +1628,22 @@ config XIP_PHYS_ADDR
 	  be linked for and stored to.  This address is dependent on your
 	  own flash usage.
 
+config XIP_DEFLATED_DATA
+	bool "Store kernel .data section compressed in ROM"
+	depends on XIP_KERNEL
+	select ZLIB_INFLATE
+	help
+	  Before the kernel is actually executed, its .data section has to be
+	  copied to RAM from ROM. This option allows for storing that data
+	  in compressed form and decompressed to RAM rather than merely being
+	  copied, saving some precious ROM space. A possible drawback is a
+	  slightly longer boot delay.
+
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on (!SMP || PM_SLEEP_SMP)
-	depends on !CPU_V7M
+	depends on MMU
+	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel.  It is like a reboot
@@ -2033,16 +1672,54 @@ config CRASH_DUMP
 	  kdump/kexec. The crash dump kernel must be compiled to a
 	  memory address not used by the main kernel
 
-	  For more details see Documentation/kdump/kdump.txt
+	  For more details see Documentation/admin-guide/kdump/kdump.rst
 
 config AUTO_ZRELADDR
-	bool "Auto calculation of the decompressed kernel image address"
+	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
+	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
 	help
 	  ZRELADDR is the physical address where the decompressed kernel
 	  image will be placed. If AUTO_ZRELADDR is selected, the address
-	  will be determined at run-time by masking the current IP with
-	  0xf8000000. This assumes the zImage being placed in the first 128MB
-	  from start of memory.
+	  will be determined at run-time, either by masking the current IP
+	  with 0xf8000000, or, if invalid, from the DTB passed in r2.
+	  This assumes the zImage being placed in the first 128MB from
+	  start of memory.
+
+config EFI_STUB
+	bool
+
+config EFI
+	bool "UEFI runtime support"
+	depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
+	select UCS2_STRING
+	select EFI_PARAMS_FROM_FDT
+	select EFI_STUB
+	select EFI_GENERIC_STUB
+	select EFI_RUNTIME_WRAPPERS
+	help
+	  This option provides support for runtime services provided
+	  by UEFI firmware (such as non-volatile variables, realtime
+	  clock, and platform reset). A UEFI stub is also provided to
+	  allow the kernel to be booted as an EFI application. This
+	  is only useful for kernels that may run on systems that have
+	  UEFI firmware.
+
+config DMI
+	bool "Enable support for SMBIOS (DMI) tables"
+	depends on EFI
+	default y
+	help
+	  This enables SMBIOS/DMI feature for systems.
+
+	  This option is only useful on systems that have UEFI firmware.
+	  However, even with this option, the resultant kernel should
+	  continue to boot on existing non-UEFI platforms.
+
+	  NOTE: This does *NOT* enable or encourage the use of DMI quirks,
+	  i.e., the the practice of identifying the platform via DMI to
+	  decide whether certain workarounds for buggy hardware and/or
+	  firmware need to be enabled. This would require the DMI subsystem
+	  to be enabled much earlier than we do on ARM, which is non-trivial.
 
 endmenu
 
@@ -2061,7 +1738,7 @@ comment "At least one emulation must be selected"
 config FPE_NWFPE
 	bool "NWFPE math emulation"
 	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
-	---help---
+	help
 	  Say Y to include the NWFPE floating point emulator in the kernel.
 	  This is necessary to run most binaries. Linux does not currently
 	  support floating point hardware so you need to say Y here even if
@@ -2085,7 +1762,7 @@ config FPE_NWFPE_XP
 config FPE_FASTFPE
 	bool "FastFPE math emulation (EXPERIMENTAL)"
 	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
-	---help---
+	help
 	  Say Y here to include the FAST floating point emulator in the kernel.
 	  This is an experimental much faster emulator which now also has full
 	  precision for the mantissa.  It does not support any exceptions.
@@ -2103,7 +1780,7 @@ config VFP
 	  Say Y to include VFP support code in the kernel. This is needed
 	  if your hardware includes a VFP unit.
 
-	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
+	  Please see <file:Documentation/arm/vfp/release-notes.rst> for
 	  release notes and additional status information.
 
 	  Say N if your target does not have VFP hardware.
@@ -2128,12 +1805,6 @@ config KERNEL_MODE_NEON
 
 endmenu
 
-menu "Userspace binary formats"
-
-source "fs/Kconfig.binfmt"
-
-endmenu
-
 menu "Power management options"
 
 source "kernel/power/Kconfig"
@@ -2144,7 +1815,8 @@ config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 
 config ARM_CPU_SUSPEND
-	def_bool PM_SLEEP
+	def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
+	depends on ARCH_SUSPEND_POSSIBLE
 
 config ARCH_HIBERNATION_POSSIBLE
 	bool
@@ -2153,23 +1825,4 @@ config ARCH_HIBERNATION_POSSIBLE
 
 endmenu
 
-source "net/Kconfig"
-
-source "drivers/Kconfig"
-
-source "drivers/firmware/Kconfig"
-
-source "fs/Kconfig"
-
-source "arch/arm/Kconfig.debug"
-
-source "security/Kconfig"
-
-source "crypto/Kconfig"
-if CRYPTO
-source "arch/arm/crypto/Kconfig"
-endif
-
-source "lib/Kconfig"
-
-source "arch/arm/kvm/Kconfig"
+source "arch/arm/Kconfig.assembler"
diff --git a/arch/arm/Kconfig-nommu b/arch/arm/Kconfig-nommu
index aed66d5df7f1..36c80d3dd93f 100644
--- a/arch/arm/Kconfig-nommu
+++ b/arch/arm/Kconfig-nommu
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # Kconfig for uClinux(non-paged MM) depend configurations
 # Hyok S. Choi <hyok.choi@samsung.com>
@@ -19,10 +20,12 @@ config DRAM_SIZE
 
 config FLASH_MEM_BASE
 	hex 'FLASH Base Address' if SET_MEM_PARAM
+	depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
 	default 0x00400000
 
 config FLASH_SIZE
 	hex 'FLASH Size' if SET_MEM_PARAM
+	depends on CPU_ARM740T || CPU_ARM946E || CPU_ARM940T
 	default 0x00400000
 
 config PROCESSOR_ID
@@ -34,8 +37,7 @@ config PROCESSOR_ID
 	  used instead of the auto-probing which utilizes the register.
 
 config REMAP_VECTORS_TO_RAM
-	bool 'Install vectors to the beginning of RAM' if DRAM_BASE
-	depends on DRAM_BASE
+	bool 'Install vectors to the beginning of RAM'
 	help
 	  The kernel needs to change the hardware exception vectors.
 	  In nommu mode, the hardware exception vectors are normally
@@ -53,8 +55,8 @@ config REMAP_VECTORS_TO_RAM
 
 config ARM_MPU
        bool 'Use the ARM v7 PMSA Compliant MPU'
-       depends on CPU_V7
-       default y
+       depends on CPU_V7 || CPU_V7M
+       default y if CPU_V7
        help
          Some ARM systems without an MMU have instead a Memory Protection
          Unit (MPU) that defines the type and permissions for regions of
diff --git a/arch/arm/Kconfig.assembler b/arch/arm/Kconfig.assembler
new file mode 100644
index 000000000000..5cb31aae1188
--- /dev/null
+++ b/arch/arm/Kconfig.assembler
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config AS_VFP_VMRS_FPINST
+	def_bool $(as-instr,.fpu vfpv2\nvmrs r0$(comma)FPINST)
+	help
+	  Supported by binutils >= 2.24 and LLVM integrated assembler.
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index a2e16f940394..b407b7b9b715 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1,13 +1,15 @@
-menu "Kernel hacking"
+# SPDX-License-Identifier: GPL-2.0
 
-source "lib/Kconfig.debug"
+config ARM_PTDUMP_CORE
+	def_bool n
 
-config ARM_PTDUMP
+config ARM_PTDUMP_DEBUGFS
 	bool "Export kernel pagetable layout to userspace via debugfs"
 	depends on DEBUG_KERNEL
 	depends on MMU
+	select ARM_PTDUMP_CORE
 	select DEBUG_FS
-	---help---
+	help
 	  Say Y here if you want to show the kernel pagetable layout in a
 	  debugfs file. This information is only useful for kernel developers
 	  who are working in architecture specific areas of the kernel.
@@ -15,49 +17,81 @@ config ARM_PTDUMP
 	  kernel.
 	  If in doubt, say "N"
 
-config STRICT_DEVMEM
-	bool "Filter access to /dev/mem"
+config DEBUG_WX
+	bool "Warn on W+X mappings at boot"
 	depends on MMU
-	---help---
-	  If this option is disabled, you allow userspace (root) access to all
-	  of memory, including kernel and userspace memory. Accidental
-	  access to this is obviously disastrous, but specific access can
-	  be used by people debugging the kernel.
+	select ARM_PTDUMP_CORE
+	help
+		Generate a warning if any W+X mappings are found at boot.
 
-	  If this option is switched on, the /dev/mem file only allows
-	  userspace access to memory mapped peripherals.
+		This is useful for discovering cases where the kernel is leaving
+		W+X mappings after applying NX, as such mappings are a security risk.
 
-          If in doubt, say Y.
+		Look for a message in dmesg output like this:
 
-# RMK wants arm kernels compiled with frame pointers or stack unwinding.
-# If you know what you are doing and are willing to live without stack
-# traces, you can get a slightly smaller kernel by setting this option to
-# n, but then RMK will have to kill you ;).
-config FRAME_POINTER
-	bool
+			arm/mm: Checked W+X mappings: passed, no W+X pages found.
+
+		or like this, if the check failed:
+
+			arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.
+
+		Note that even if the check fails, your kernel is possibly
+		still fine, as W+X mappings are not a security hole in
+		themselves, what they do is that they make the exploitation
+		of other unfixed kernel bugs easier.
+
+		There is no runtime or memory usage effect of this option
+		once the kernel has booted up - it's a one time check.
+
+		If in doubt, say "Y".
+
+choice
+	prompt "Choose kernel unwinder"
+	default UNWINDER_ARM if AEABI
+	default UNWINDER_FRAME_POINTER if !AEABI
+	help
+	  This determines which method will be used for unwinding kernel stack
+	  traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
+	  livepatch, lockdep, and more.
+
+config UNWINDER_FRAME_POINTER
+	bool "Frame pointer unwinder"
 	depends on !THUMB2_KERNEL
-	default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
+	select ARCH_WANT_FRAME_POINTERS
+	select FRAME_POINTER
 	help
-	  If you say N here, the resulting kernel will be slightly smaller and
-	  faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
-	  when a problem occurs with the kernel, the information that is
-	  reported is severely limited.
+	  This option enables the frame pointer unwinder for unwinding
+	  kernel stack traces.
 
-config ARM_UNWIND
-	bool "Enable stack unwinding support (EXPERIMENTAL)"
+config UNWINDER_ARM
+	bool "ARM EABI stack unwinder"
 	depends on AEABI
-	default y
+	select ARM_UNWIND
 	help
 	  This option enables stack unwinding support in the kernel
 	  using the information automatically generated by the
 	  compiler. The resulting kernel image is slightly bigger but
 	  the performance is not affected. Currently, this feature
-	  only works with EABI compilers. If unsure say Y.
+	  only works with EABI compilers.
+
+endchoice
 
-config OLD_MCOUNT
+config ARM_UNWIND
+	bool
+
+config BACKTRACE_VERBOSE
+	bool "Verbose backtrace"
+	depends on EXPERT
+	help
+	  When the kernel produces a warning or oops, the kernel prints a
+	  trace of the call chain. This option controls whether we include
+	  the numeric addresses or only include the symbolic information.
+
+	  In most cases, say N here, unless you are intending to debug the
+	  kernel and have access to the kernel binary image.
+
+config FRAME_POINTER
 	bool
-	depends on FUNCTION_TRACER && FRAME_POINTER
-	default y
 
 config DEBUG_USER
 	bool "Verbose user fault messages"
@@ -123,34 +157,107 @@ choice
 		    0x80020000      | 0xf0020000     | UART8
 		    0x80024000      | 0xf0024000     | UART9
 
-	config AT91_DEBUG_LL_DBGU0
-		bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
+	config DEBUG_AT91_RM9200_DBGU
+		bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
+		    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60
+
+	config DEBUG_AT91_SAM9263_DBGU
+		bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
+		select DEBUG_AT91_UART
+		depends on SOC_AT91SAM9 || SOC_SAMA5D3
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the DBGU port of:
+		    at91sam9263, at91sam9g45, at91sam9m10,
+		    sama5d3
+
+	config DEBUG_AT91_SAMA5D2_UART1
+		bool "Kernel low-level debugging on SAMA5D2 UART1"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D2
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the UART1 port of sama5d2.
+
+	config DEBUG_AT91_SAMA5D4_USART3
+		bool "Kernel low-level debugging on SAMA5D4 USART3"
+		select DEBUG_AT91_UART
+		depends on SOC_SAMA5D4
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the USART3 port of sama5d4.
+
+	config DEBUG_AT91_SAMV7_USART1
+		bool "Kernel low-level debugging via SAMV7 USART1"
 		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_AT91RM9200 || SOC_AT91SAM9
+		depends on SOC_SAMV7
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the USART1 port on SAMV7 based
+		  machines.
 
-	config AT91_DEBUG_LL_DBGU1
-		bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
+	config DEBUG_AT91_SAMA7G5_FLEXCOM3
+		bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
 		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_AT91SAM9 || SOC_SAMA5
+		depends on SOC_SAMA7G5
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on the FLEXCOM3 port of SAMA7G5.
 
-	config AT91_DEBUG_LL_DBGU2
-		bool "Kernel low-level debugging on sama5d4"
+	config DEBUG_AT91_LAN966_FLEXCOM
+		bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
 		select DEBUG_AT91_UART
-		depends on ARCH_AT91
-		depends on SOC_SAMA5
+		depends on SOC_LAN966
+		help
+		Say Y here if you want kernel low-level debugging support
+		on the FLEXCOM port of LAN966.
+
+		DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+		0xe0040200      | 0xfd040200     | FLEXCOM0
+		0xe0044200      | 0xfd044200     | FLEXCOM1
+		0xe0060200      | 0xfd060200     | FLEXCOM2
+		0xe0064200      | 0xfd064200     | FLEXCOM3
+		0xe0070200      | 0xfd070200     | FLEXCOM4
+
+		By default, enabling FLEXCOM3 port. Based on requirement, use
+		DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
+		table.
 
 	config DEBUG_BCM2835
 		bool "Kernel low-level debugging on BCM2835 PL011 UART"
-		depends on ARCH_BCM2835
+		depends on ARCH_BCM2835 && ARCH_MULTI_V6
+		select DEBUG_UART_PL01X
+
+	config DEBUG_BCM2836
+		bool "Kernel low-level debugging on BCM2836 PL011 UART"
+		depends on ARCH_BCM2835 && ARCH_MULTI_V7
 		select DEBUG_UART_PL01X
 
 	config DEBUG_BCM_5301X
-		bool "Kernel low-level debugging on BCM5301X UART1"
-		depends on ARCH_BCM_5301X
+		bool "Kernel low-level debugging on BCM5301X/NSP UART1"
+		depends on ARCH_BCM_5301X || ARCH_BCM_NSP
+		select DEBUG_UART_8250
+
+	config DEBUG_BCM_HR2
+		bool "Kernel low-level debugging on Hurricane 2 UART2"
+		depends on ARCH_BCM_HR2
 		select DEBUG_UART_8250
 
+	config DEBUG_BCM_IPROC_UART3
+		bool "Kernel low-level debugging on BCM IPROC UART3"
+		depends on ARCH_BCM_CYGNUS
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the third serial port on these devices.
+
 	config DEBUG_BCM_KONA_UART
 		bool "Kernel low-level debugging messages via BCM KONA UART"
 		depends on ARCH_BCM_MOBILE
@@ -162,10 +269,9 @@ choice
 		  mobile SoCs in the Kona family of chips (e.g. bcm28155,
 		  bcm11351, etc...)
 
-	config DEBUG_BCM63XX
+	config DEBUG_BCM63XX_UART
 		bool "Kernel low-level debugging on BCM63XX UART"
-		depends on ARCH_BCM_63XX
-		select DEBUG_UART_BCM63XX
+		depends on ARCH_BCMBCA
 
 	config DEBUG_BERLIN_UART
 		bool "Marvell Berlin SoC Debug UART"
@@ -178,10 +284,11 @@ choice
 	config DEBUG_BRCMSTB_UART
 		bool "Use BRCMSTB UART for low-level debug"
 		depends on ARCH_BRCMSTB
-		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
-		  their output to the first serial port on these devices.
+		  their output to the first serial port on these devices. The
+		  UART physical and virtual address is automatically provided
+		  based on the chip identification register value.
 
 		  If you have a Broadcom STB chip and would like early print
 		  messages to appear over the UART, select this option.
@@ -200,14 +307,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the second serial port on these devices.
 
-	config DEBUG_CNS3XXX
-		bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
-		depends on ARCH_CNS3XXX
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-                  their output to the CNS3xxx UART0.
-
 	config DEBUG_DAVINCI_DA8XX_UART1
 		bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
 		depends on ARCH_DAVINCI_DA8XX
@@ -224,31 +323,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART2 serial port on DaVinci DA8XX devices.
 
-	config DEBUG_DAVINCI_DMx_UART0
-		bool "Kernel low-level debugging on DaVinci DMx using UART0"
-		depends on ARCH_DAVINCI_DMx
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 serial port on DaVinci DMx devices.
-
-	config DEBUG_ZYNQ_UART0
-		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
-		depends on ARCH_ZYNQ
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART0 on the Zynq platform.
-
-	config DEBUG_ZYNQ_UART1
-		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
-		depends on ARCH_ZYNQ
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART1 on the Zynq platform.
-
-		  If you have a ZC702 board and want early boot messages to
-		  appear on the USB serial adaptor, select this option.
-
 	config DEBUG_DC21285_PORT
 		bool "Kernel low-level debugging messages via footbridge serial port"
 		depends on FOOTBRIDGE
@@ -263,28 +337,37 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the UA0 serial port in the CX92755.
 
+	config DEBUG_EP93XX
+		bool "Kernel low-level debugging messages via ep93xx UART"
+		depends on ARCH_EP93XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Cirrus Logic EP93xx based platforms.
+
 	config DEBUG_FOOTBRIDGE_COM1
 		bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
 		depends on FOOTBRIDGE
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want the debug print routines to direct
 		  their output to the 8250 at PCI COM1.
 
-	config DEBUG_HI3620_UART
-		bool "Hisilicon HI3620 Debug UART"
-		depends on ARCH_HI3xxx
-		select DEBUG_UART_PL01X
+	config DEBUG_GEMINI
+		bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
+		depends on ARCH_GEMINI
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on HI3620 UART.
+		  on Cortina Gemini based platforms.
 
-	config DEBUG_HI3716_UART
-		bool "Hisilicon Hi3716 Debug UART"
+	config DEBUG_HI3620_UART
+		bool "Hisilicon HI3620 Debug UART"
 		depends on ARCH_HI3xxx
 		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on HI3716 UART.
+		  on HI3620 UART.
 
 	config DEBUG_HIGHBANK_UART
 		bool "Kernel low-level debugging messages via Highbank UART"
@@ -340,12 +423,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX25.
 
-	config DEBUG_IMX21_IMX27_UART
-		bool "i.MX21 and i.MX27 Debug UART"
-		depends on SOC_IMX21 || SOC_IMX27
+	config DEBUG_IMX27_UART
+		bool "i.MX27 Debug UART"
+		depends on SOC_IMX27
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX21 or i.MX27.
+		  on i.MX27.
 
 	config DEBUG_IMX28_UART
 		bool "i.MX28 Debug UART"
@@ -411,6 +494,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX6SX.
 
+	config DEBUG_IMX6UL_UART
+		bool "i.MX6UL Debug UART"
+		depends on SOC_IMX6UL
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX6UL.
+
 	config DEBUG_IMX7D_UART
 		bool "i.MX7D Debug UART"
 		depends on SOC_IMX7D
@@ -418,6 +508,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX7D.
 
+	config DEBUG_INTEGRATOR
+		bool "Kernel low-level debugging messages via ARM Integrator UART"
+		depends on ARCH_INTEGRATOR
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ARM Integrator platforms.
+
 	config DEBUG_KEYSTONE_UART0
 		bool "Kernel low-level debugging on KEYSTONE2 using UART0"
 		depends on ARCH_KEYSTONE
@@ -434,13 +532,6 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to UART1 serial port on KEYSTONE2 devices.
 
-	config DEBUG_KS8695_UART
-		bool "KS8695 Debug UART"
-		depends on ARCH_KS8695
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on KS8695.
-
 	config DEBUG_LPC18XX_UART0
 		bool "Kernel low-level debugging via LPC18xx/43xx UART0"
 		depends on ARCH_LPC18XX
@@ -449,6 +540,14 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on NXP LPC18xx/43xx UART0.
 
+	config DEBUG_LPC32XX
+		bool "Kernel low-level debugging messages via NXP LPC32xx UART"
+		depends on ARCH_LPC32XX
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on NXP LPC32xx based platforms.
+
 	config DEBUG_MESON_UARTAO
 		bool "Kernel low-level debugging via Meson6 UARTAO"
 		depends on ARCH_MESON
@@ -472,26 +571,10 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on MMP UART3.
 
-	config DEBUG_QCOM_UARTDM
-		bool "Kernel low-level debugging messages via QCOM UARTDM"
-		depends on ARCH_QCOM
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the serial port on Qualcomm devices.
-
-		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
-		  APQ8064   0x16640000        0xf0040000
-		  APQ8084   0xf995e000        0xfa75e000
-		  MSM8X60   0x19c40000        0xf0040000
-		  MSM8960   0x16440000        0xf0040000
-		  MSM8974   0xf991e000        0xfa71e000
-
-		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
-		  options based on your needs.
-
 	config DEBUG_MVEBU_UART0
 		bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
 		depends on ARCH_MVEBU
+		depends on ARCH_MVEBU && CPU_V7
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
@@ -504,17 +587,23 @@ choice
 		  Plathome OpenBlocks AX3, when using the original
 		  bootloader.
 
+		  This option will not work on older Marvell platforms
+		  (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
+		  the "new bootloader" variant.
+
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
 	config DEBUG_MVEBU_UART0_ALTERNATE
 		bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
-		depends on ARCH_MVEBU
+		depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms on UART0.
+		  on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
+
 
 		  This option should be used with the new bootloaders
 		  that remap the internal registers at 0xf1000000.
@@ -529,28 +618,49 @@ choice
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on MVEBU based platforms on UART1.
+		  on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
+		  Kirkwood, Dove, MV78xx0, Orion5x).
 
 		  This option should be used with the new bootloaders
 		  that remap the internal registers at 0xf1000000.
+		  All of the older (pre Armada XP/370) platforms also use
+		  this address, regardless of the boot loader version.
 
 		  If the wrong DEBUG_MVEBU_UART* option is selected,
 		  when u-boot hands over to the kernel, the system
 		  silently crashes, with no serial output at all.
 
-	config DEBUG_VF_UART
-		bool "Vybrid UART"
-		depends on SOC_VF610
+	config DEBUG_MSTARV7_PMUART
+		bool "Kernel low-level debugging messages via MSTARV7 PM UART"
+		depends on ARCH_MSTARV7
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on Vybrid based platforms.
+		  for MSTAR ARMv7-based platforms on PM UART.
+
+	config DEBUG_MT6589_UART0
+		bool "Mediatek mt6589 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt6589 based platforms on UART0.
 
-	config DEBUG_NETX_UART
-		bool "Kernel low-level debugging messages via NetX UART"
-		depends on ARCH_NETX
+	config DEBUG_MT8127_UART0
+		bool "Mediatek mt8127/mt6592 UART0"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  for Mediatek mt8127 based platforms on UART0.
+
+	config DEBUG_MT8135_UART3
+		bool "Mediatek mt8135 UART3"
+		depends on ARCH_MEDIATEK
+		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on Hilscher NetX based platforms.
+		  for Mediatek mt8135 based platforms on UART3.
 
 	config DEBUG_NOMADIK_UART
 		bool "Kernel low-level debugging messages via NOMADIK UART"
@@ -603,7 +713,7 @@ choice
 	config DEBUG_OMAP2UART1
 		bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
 		  omap3 torpedo and 3530 lv som.
@@ -611,17 +721,17 @@ choice
 	config DEBUG_OMAP2UART2
 		bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP2UART3
 		bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART3
 		bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 		help
 		  This covers at least cm_t3x, beagle, crane, devkit8000,
 		  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
@@ -630,75 +740,43 @@ choice
 	config DEBUG_OMAP4UART3
 		bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP3UART4
 		bool "Kernel low-level debugging messages via OMAP36XX UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_OMAP4UART4
 		bool "Kernel low-level debugging messages via OMAP4/5 UART4"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
-
-	config DEBUG_OMAP7XXUART1
-		bool "Kernel low-level debugging via OMAP730 UART1"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART1.
-
-	config DEBUG_OMAP7XXUART2
-		bool "Kernel low-level debugging via OMAP730 UART2"
-		depends on ARCH_OMAP730
 		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART2.
-
-	config DEBUG_OMAP7XXUART3
-		bool "Kernel low-level debugging via OMAP730 UART3"
-		depends on ARCH_OMAP730
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on OMAP730 based platforms on the UART3.
 
 	config DEBUG_TI81XXUART1
 		bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART2
 		bool "Kernel low-level debugging messages via TI81XX UART2"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_TI81XXUART3
 		bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_AM33XXUART1
 		bool "Kernel low-level debugging messages via AM33XX UART1"
 		depends on ARCH_OMAP2PLUS
-		select DEBUG_OMAP2PLUS_UART
+		select DEBUG_UART_8250
 
 	config DEBUG_ZOOM_UART
 		bool "Kernel low-level debugging messages via Zoom2/3 UART"
 		depends on ARCH_OMAP2PLUS
 		select DEBUG_OMAP2PLUS_UART
 
-	config DEBUG_PICOXCELL_UART
-		depends on ARCH_PICOXCELL
-		bool "Use PicoXcell UART for low-level debug"
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on PicoXcell based platforms.
-
 	config DEBUG_PXA_UART1
 		depends on ARCH_PXA
 		bool "Use PXA UART1 for low-level debug"
@@ -707,6 +785,24 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on PXA UART1.
 
+	config DEBUG_QCOM_UARTDM
+		bool "Kernel low-level debugging messages via QCOM UARTDM"
+		depends on ARCH_QCOM
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to the serial port on Qualcomm devices.
+
+		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
+		  APQ8064   0x16640000        0xf0040000
+		  APQ8084   0xf995e000        0xfa75e000
+		  IPQ4019   0x078af000        0xf78af000
+		  MSM8X60   0x19c40000        0xf0040000
+		  MSM8960   0x16440000        0xf0040000
+		  MSM8974   0xf991e000        0xfa71e000
+
+		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
+		  options based on your needs.
+
 	config DEBUG_REALVIEW_STD_PORT
 		bool "RealView Default UART"
 		depends on ARCH_REALVIEW
@@ -725,6 +821,30 @@ choice
 		  their output to the standard serial port on the RealView
 		  PB1176 platform.
 
+	config DEBUG_RV1108_UART0
+		bool "Kernel low-level debugging messages via Rockchip RV1108 UART0"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+                  on Rockchip RV1108 based platforms.
+
+	config DEBUG_RV1108_UART1
+		bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip RV1108 based platforms.
+
+	config DEBUG_RV1108_UART2
+		bool "Kernel low-level debugging messages via Rockchip RV1108 UART2"
+		depends on ARCH_ROCKCHIP
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Rockchip RV1108 based platforms.
+
 	config DEBUG_RK29_UART0
 		bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
 		depends on ARCH_ROCKCHIP
@@ -796,6 +916,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  via SCIF2 on Renesas RZ/A1H (R7S72100).
 
+	config DEBUG_R7S9210_SCIF2
+		bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF2 on Renesas RZ/A2M (R7S9210).
+
+	config DEBUG_R7S9210_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
+		depends on ARCH_R7S9210
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/A2M (R7S9210).
+
 	config DEBUG_RCAR_GEN1_SCIF0
 		bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
 		depends on ARCH_R8A7778
@@ -811,13 +945,22 @@ choice
 		  via SCIF2 on Renesas R-Car H1 (R8A7779).
 
 	config DEBUG_RCAR_GEN2_SCIF0
-		bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
-		depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
+		bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
+		depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
+			ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
+		  via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744),
+		  R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or
 		  M2-N (R8A7793).
 
+	config DEBUG_RCAR_GEN2_SCIF1
+		bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
+		depends on ARCH_R8A77470
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF1 on Renesas RZ/G1C (R8A77470).
+
 	config DEBUG_RCAR_GEN2_SCIF2
 		bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
 		depends on ARCH_R8A7794
@@ -825,6 +968,20 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  via SCIF2 on Renesas R-Car E2 (R8A7794).
 
+	config DEBUG_RCAR_GEN2_SCIF4
+		bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
+		depends on ARCH_R8A7745
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIF4 on Renesas RZ/G1E (R8A7745).
+
+	config DEBUG_RCAR_GEN2_SCIFA2
+		bool "Kernel low-level debugging messages via SCIFA2 on R8A7742"
+		depends on ARCH_R8A7742
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  via SCIFA2 on Renesas RZ/G1H (R8A7742).
+
 	config DEBUG_RMOBILE_SCIFA0
 		bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
 		depends on ARCH_R8A73A4
@@ -847,9 +1004,9 @@ choice
 		  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
 
 	config DEBUG_S3C_UART0
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 0 for low-level debug"
 		help
@@ -858,9 +1015,9 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART1
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 1 for low-level debug"
 		help
@@ -869,9 +1026,9 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART2
-		depends on PLAT_SAMSUNG
+		depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
-		select DEBUG_S3C24XX_UART if ARCH_S3C24XX
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 2 for low-level debug"
 		help
@@ -880,8 +1037,9 @@ choice
 		  by the boot-loader before use.
 
 	config DEBUG_S3C_UART3
-		depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210)
+		depends on ARCH_EXYNOS || ARCH_S5PV210
 		select DEBUG_EXYNOS_UART if ARCH_EXYNOS
+		select DEBUG_S3C64XX_UART if ARCH_S3C64XX
 		select DEBUG_S5PV210_UART if ARCH_S5PV210
 		bool "Use Samsung S3C UART 3 for low-level debug"
 		help
@@ -889,33 +1047,6 @@ choice
 		  their output to UART 3. The port must have been initialised
 		  by the boot-loader before use.
 
-	config DEBUG_S3C2410_UART0
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 0. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART1
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 1. The port must have been initialised
-		  by the boot-loader before use.
-
-	config DEBUG_S3C2410_UART2
-		depends on ARCH_S3C24XX
-		select DEBUG_S3C2410_UART
-		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to UART 2. The port must have been initialised
-		  by the boot-loader before use.
-
 	config DEBUG_SA1100
 		depends on ARCH_SA1100
 		bool "Use SA1100 UARTs for low-level debug"
@@ -924,22 +1055,37 @@ choice
 		  on SA-11x0 UART ports. The kernel will check for the first
 		  enabled UART in a sequence 3-1-2.
 
+	config DEBUG_SD5203_UART
+		bool "Hisilicon SD5203 Debug UART"
+		depends on ARCH_SD5203
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SD5203 UART.
+
 	config DEBUG_SOCFPGA_UART0
-		depends on ARCH_SOCFPGA
+		depends on ARCH_INTEL_SOCFPGA
 		bool "Use SOCFPGA UART0 for low-level debug"
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
-	config DEBUG_SOCFPGA_UART1
-		depends on ARCH_SOCFPGA
-		bool "Use SOCFPGA UART1 for low-level debug"
+	config DEBUG_SOCFPGA_ARRIA10_UART1
+		depends on ARCH_INTEL_SOCFPGA
+		bool "Use SOCFPGA Arria10 UART1 for low-level debug"
 		select DEBUG_UART_8250
 		help
 		  Say Y here if you want kernel low-level debugging support
 		  on SOCFPGA(Arria 10) based platforms.
 
+	config DEBUG_SOCFPGA_CYCLONE5_UART1
+		depends on ARCH_INTEL_SOCFPGA
+		bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
+		select DEBUG_UART_8250
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
 
 	config DEBUG_SUN9I_UART0
 		bool "Kernel low-level debugging messages via sun9i UART0"
@@ -973,6 +1119,100 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Allwinner A31/A23 based platforms on the R_UART.
 
+	config DEBUG_SPEAR3XX
+		bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
+		depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr based platforms.
+
+	config DEBUG_SPEAR13XX
+		bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
+		depends on ARCH_SPEAR13XX
+		select DEBUG_UART_PL01X
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on ST SPEAr13xx based platforms.
+
+	config DEBUG_STIH41X_ASC2
+		bool "Use StiH415/416 ASC2 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2000, which has
+		  default UART wired up to ASC2.
+
+		  If unsure, say N.
+
+	config DEBUG_STIH41X_SBC_ASC1
+		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH415/416 based platforms like b2020. which has
+		  default UART wired up to SBC ASC1.
+
+		  If unsure, say N.
+
+	config DEBUG_STIH418_SBC_ASC0
+		bool "Use StiH418 SBC ASC0 UART for low-level debug"
+		depends on ARCH_STI
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STiH418 based platforms which has default UART wired
+		  up to SBC ASC0.
+
+		  If unsure, say N.
+
+	config STM32F4_DEBUG_UART
+		bool "Use STM32F4 UART for low-level debug"
+		depends on MACH_STM32F429 || MACH_STM32F469
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F4 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32F7_DEBUG_UART
+		bool "Use STM32F7 UART for low-level debug"
+		depends on MACH_STM32F746 || MACH_STM32F769
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32F7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32H7_DEBUG_UART
+		bool "Use STM32H7 UART for low-level debug"
+		depends on MACH_STM32H743
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on STM32H7 based platforms, which default UART is wired on
+		  USART1, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS.
+
+		  If unsure, say N.
+
+	config STM32MP1_DEBUG_UART
+		bool "Use STM32MP1 UART for low-level debug"
+		depends on MACH_STM32MP157
+		select DEBUG_STM32_UART
+		help
+		  Say Y here if you want kernel low-level debugging support on
+		  STM32MP1-based platforms, where the default UART is wired to
+		  UART4, but another UART instance can be selected by modifying
+		  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.
+
+		  If unsure, say N.
+
 	config TEGRA_DEBUG_UART_AUTO_ODMDATA
 		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
 		depends on ARCH_TEGRA
@@ -1025,62 +1265,6 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Tegra based platforms.
 
-	config DEBUG_SIRFPRIMA2_UART1
-		bool "Kernel low-level debugging messages via SiRFprimaII UART1"
-		depends on ARCH_PRIMA2
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFprimaII devices.
-
-	config DEBUG_SIRFATLAS7_UART0
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart0 port on SiRFATLAS7 devices.The uart0
-		  is used on SiRFATLAS7 as a extra debug port.sometimes an extra
-		  debug port can be very useful.
-
-	config DEBUG_SIRFATLAS7_UART1
-		bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
-		depends on ARCH_ATLAS7
-		select DEBUG_SIRFSOC_UART
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart1 port on SiRFATLAS7 devices.
-
-	config STIH41X_DEBUG_ASC2
-		bool "Use StiH415/416 ASC2 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2000, which has
-		  default UART wired up to ASC2.
-
-		  If unsure, say N.
-
-	config STIH41X_DEBUG_SBC_ASC1
-		bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
-		depends on ARCH_STI
-		select DEBUG_STI_UART
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on STiH415/416 based platforms like b2020. which has
-		  default UART wired up to SBC ASC1.
-
-		  If unsure, say N.
-
-	config DEBUG_U300_UART
-		bool "Kernel low-level debugging messages via U300 UART0"
-		depends on ARCH_U300
-		select DEBUG_UART_PL01X
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to the uart port on U300 devices.
-
 	config DEBUG_UX500_UART
 		depends on ARCH_U8500
 		bool "Use Ux500 UART for low-level debug"
@@ -1088,29 +1272,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on Ux500 based platforms.
 
-	config DEBUG_MT6589_UART0
-		bool "Mediatek mt6589 UART0"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt6589 based platforms on UART0.
-
-	config DEBUG_MT8127_UART0
-		bool "Mediatek mt8127/mt6592 UART0"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt8127 based platforms on UART0.
-
-	config DEBUG_MT8135_UART3
-		bool "Mediatek mt8135 UART3"
-		depends on ARCH_MEDIATEK
-		select DEBUG_UART_8250
+	config DEBUG_VERSATILE
+		bool "Kernel low-level debugging messages via ARM Versatile UART"
+		depends on ARCH_VERSATILE
+		select DEBUG_UART_PL01X
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  for Mediatek mt8135 based platforms on UART3.
+		  on ARM Versatile platforms.
 
 	config DEBUG_VEXPRESS_UART0_DETECT
 		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
@@ -1148,6 +1316,13 @@ choice
 		  This option selects UART0 at 0xb0090000. This is appropriate for
 		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7
 
+	config DEBUG_VF_UART
+		bool "Vybrid UART"
+		depends on SOC_VF610
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on Vybrid based platforms.
+
 	config DEBUG_VT8500_UART0
 		bool "Use UART0 on VIA/Wondermedia SoCs"
 		depends on ARCH_VT8500
@@ -1155,6 +1330,23 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
+	config DEBUG_ZYNQ_UART0
+		bool "Kernel low-level debugging on Xilinx Zynq using UART0"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART0 on the Zynq platform.
+
+	config DEBUG_ZYNQ_UART1
+		bool "Kernel low-level debugging on Xilinx Zynq using UART1"
+		depends on ARCH_ZYNQ
+		help
+		  Say Y here if you want the debug print routines to direct
+		  their output to UART1 on the Zynq platform.
+
+		  If you have a ZC702 board and want early boot messages to
+		  appear on the USB serial adaptor, select this option.
+
 	config DEBUG_ICEDCC
 		bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 		help
@@ -1182,18 +1374,6 @@ choice
 		  For more details about semihosting, please see
 		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
 
-	config DEBUG_ZTE_ZX
-		bool "Use ZTE ZX UART"
-		select DEBUG_UART_PL01X
-		depends on ARCH_ZX
-		help
-		  Say Y here if you are enabling ZTE ZX296702 SOC and need
-		  debug uart support.
-
-		  This option is preferred over the platform specific
-		  options; the platform specific options are deprecated
-		  and will be soon removed.
-
 	config DEBUG_LL_UART_8250
 		bool "Kernel low-level debugging via 8250 UART"
 		help
@@ -1207,20 +1387,6 @@ choice
 		  options; the platform specific options are deprecated
 		  and will be soon removed.
 
-	config DEBUG_LL_UART_EFM32
-		bool "Kernel low-level debugging via efm32 UART"
-		depends on ARCH_EFM32
-		help
-		  Say Y here if you want the debug print routines to direct
-		  their output to an UART or USART port on efm32 based
-		  machines. Use the following addresses for DEBUG_UART_PHYS:
-
-		    0x4000c000 | USART0
-		    0x4000c400 | USART1
-		    0x4000c800 | USART2
-		    0x4000e000 | UART0
-		    0x4000e400 | UART1
-
 	config DEBUG_LL_UART_PL01X
 		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
 		help
@@ -1243,35 +1409,41 @@ config DEBUG_AT91_UART
 config DEBUG_EXYNOS_UART
 	bool
 
-config DEBUG_S3C2410_UART
-	bool
-	select DEBUG_S3C24XX_UART
-
-config DEBUG_S3C24XX_UART
+config DEBUG_S3C64XX_UART
 	bool
 
 config DEBUG_S5PV210_UART
 	bool
 
+config DEBUG_S3C_UART
+	depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
+		   DEBUG_EXYNOS_UART
+	int
+	default "0" if DEBUG_S3C_UART0
+	default "1" if DEBUG_S3C_UART1
+	default "2" if DEBUG_S3C_UART2
+	default "3" if DEBUG_S3C_UART3
+
 config DEBUG_OMAP2PLUS_UART
 	bool
 	depends on ARCH_OMAP2PLUS
 
 config DEBUG_IMX_UART_PORT
-	int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
-						DEBUG_IMX25_UART || \
-						DEBUG_IMX21_IMX27_UART || \
-						DEBUG_IMX31_UART || \
-						DEBUG_IMX35_UART || \
-						DEBUG_IMX50_UART || \
-						DEBUG_IMX51_UART || \
-						DEBUG_IMX53_UART || \
-						DEBUG_IMX6Q_UART || \
-						DEBUG_IMX6SL_UART || \
-						DEBUG_IMX6SX_UART || \
-						DEBUG_IMX7D_UART
+	int "i.MX Debug UART Port Selection"
+	depends on DEBUG_IMX1_UART || \
+		   DEBUG_IMX25_UART || \
+		   DEBUG_IMX27_UART || \
+		   DEBUG_IMX31_UART || \
+		   DEBUG_IMX35_UART || \
+		   DEBUG_IMX50_UART || \
+		   DEBUG_IMX51_UART || \
+		   DEBUG_IMX53_UART || \
+		   DEBUG_IMX6Q_UART || \
+		   DEBUG_IMX6SL_UART || \
+		   DEBUG_IMX6SX_UART || \
+		   DEBUG_IMX6UL_UART || \
+		   DEBUG_IMX7D_UART
 	default 1
-	depends on ARCH_MXC
 	help
 	  Choose UART port on which kernel low-level debug messages
 	  should be output.
@@ -1289,62 +1461,77 @@ config DEBUG_TEGRA_UART
 	bool
 	depends on ARCH_TEGRA
 
-config DEBUG_STI_UART
+config DEBUG_STM32_UART
 	bool
-	depends on ARCH_STI
+	depends on ARCH_STM32
 
-config DEBUG_SIRFSOC_UART
-	bool
-	depends on ARCH_SIRF
+config DEBUG_UART_FLOW_CONTROL
+	bool "Enable flow control (CTS) for the debug UART"
+	depends on DEBUG_LL
+	default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
+	help
+	  Some UART ports are connected to terminals that will use modem
+	  control signals to indicate whether they are ready to receive text.
+	  In practice this means that the terminal is asserting the special
+	  control signal CTS (Clear To Send). If your debug UART supports
+	  this and your debug terminal will require it, enable this option.
 
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/sa1100.S" if DEBUG_SA1100
+	default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
 	default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	default "debug/at91.S" if DEBUG_AT91_UART
 	default "debug/asm9260.S" if DEBUG_ASM9260_UART
 	default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
+	default "debug/dc21285.S" if DEBUG_DC21285_PORT
 	default "debug/meson.S" if DEBUG_MESON_UARTAO
 	default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
 	default "debug/exynos.S" if DEBUG_EXYNOS_UART
-	default "debug/efm32.S" if DEBUG_LL_UART_EFM32
 	default "debug/icedcc.S" if DEBUG_ICEDCC
 	default "debug/imx.S" if DEBUG_IMX1_UART || \
 				 DEBUG_IMX25_UART || \
-				 DEBUG_IMX21_IMX27_UART || \
+				 DEBUG_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
 				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX53_UART ||\
+				 DEBUG_IMX53_UART || \
 				 DEBUG_IMX6Q_UART || \
 				 DEBUG_IMX6SL_UART || \
 				 DEBUG_IMX6SX_UART || \
+				 DEBUG_IMX6UL_UART || \
 				 DEBUG_IMX7D_UART
-	default "debug/ks8695.S" if DEBUG_KS8695_UART
 	default "debug/msm.S" if DEBUG_QCOM_UARTDM
-	default "debug/netx.S" if DEBUG_NETX_UART
 	default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
 	default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1
 	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
+	default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
 	default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
-	default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
+	default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
 	default "debug/s5pv210.S" if DEBUG_S5PV210_UART
-	default "debug/sirf.S" if DEBUG_SIRFSOC_UART
-	default "debug/sti.S" if DEBUG_STI_UART
+	default "debug/sti.S" if DEBUG_STIH41X_ASC2
+	default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
+	default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
+	default "debug/stm32.S" if DEBUG_STM32_UART
 	default "debug/tegra.S" if DEBUG_TEGRA_UART
 	default "debug/ux500.S" if DEBUG_UX500_UART
 	default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
 	default "debug/vf.S" if DEBUG_VF_UART
 	default "debug/vt8500.S" if DEBUG_VT8500_UART0
 	default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
-	default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+	default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
 	default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
+	default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
 	default "mach/debug-macro.S"
 
 # Compatibility options for PL01x
@@ -1353,20 +1540,10 @@ config DEBUG_UART_PL01X
 
 # Compatibility options for 8250
 config DEBUG_UART_8250
-	def_bool ARCH_DOVE || ARCH_EBSA110 || \
-		(FOOTBRIDGE && !DEBUG_DC21285_PORT) || \
-		ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \
-		ARCH_IOP33X || ARCH_IXP4XX || \
-		ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
-	def_bool ARCH_BCM_63XX
+	def_bool ARCH_IXP4XX || ARCH_RPC
 
 config DEBUG_UART_PHYS
 	hex "Physical base address of debug UART"
-	default 0x00100a00 if DEBUG_NETX_UART
-	default 0x01c20000 if DEBUG_DAVINCI_DMx_UART0
 	default 0x01c28000 if DEBUG_SUNXI_UART0
 	default 0x01c28400 if DEBUG_SUNXI_UART1
 	default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
@@ -1376,222 +1553,265 @@ config DEBUG_UART_PHYS
 	default 0x02531000 if DEBUG_KEYSTONE_UART1
 	default 0x03010fe0 if ARCH_RPC
 	default 0x07000000 if DEBUG_SUN9I_UART0
-	default 0x09405000 if DEBUG_ZTE_ZX
+	default 0x09530000 if DEBUG_STIH418_SBC_ASC0
 	default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
 				DEBUG_VEXPRESS_UART0_CA9
 	default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
 	default 0x10124000 if DEBUG_RK3X_UART0
 	default 0x10126000 if DEBUG_RK3X_UART1
-	default 0x101f1000 if ARCH_VERSATILE
+	default 0x101f1000 if DEBUG_VERSATILE
 	default 0x101fb000 if DEBUG_NOMADIK_UART
+	default 0x10210000 if DEBUG_RV1108_UART2
+	default 0x10220000 if DEBUG_RV1108_UART1
+	default 0x10230000 if DEBUG_RV1108_UART0
 	default 0x11002000 if DEBUG_MT8127_UART0
 	default 0x11006000 if DEBUG_MT6589_UART0
 	default 0x11009000 if DEBUG_MT8135_UART3
-	default 0x16000000 if ARCH_INTEGRATOR
+	default 0x16000000 if DEBUG_INTEGRATOR
+	default 0x1600d000 if DEBUG_SD5203_UART
 	default 0x18000300 if DEBUG_BCM_5301X
-	default 0x18010000 if DEBUG_SIRFATLAS7_UART0
-	default 0x18020000 if DEBUG_SIRFATLAS7_UART1
+	default 0x18000400 if DEBUG_BCM_HR2
+	default 0x18023000 if DEBUG_BCM_IPROC_UART3
 	default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0x1f221000 if DEBUG_MSTARV7_PMUART
 	default 0x20001000 if DEBUG_HIP01_UART
 	default 0x20060000 if DEBUG_RK29_UART0
 	default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
 	default 0x20201000 if DEBUG_BCM2835
 	default 0x3e000000 if DEBUG_BCM_KONA_UART
-	default 0x4000e400 if DEBUG_LL_UART_EFM32
+	default 0x3f201000 if DEBUG_BCM2836
+	default 0x40010000 if STM32MP1_DEBUG_UART
+	default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
+				STM32H7_DEBUG_UART
+	default 0x40028000 if DEBUG_AT91_SAMV7_USART1
 	default 0x40081000 if DEBUG_LPC18XX_UART0
-	default 0x40090000 if ARCH_LPC32XX
+	default 0x40090000 if DEBUG_LPC32XX
 	default 0x40100000 if DEBUG_PXA_UART1
-	default 0x42000000 if ARCH_GEMINI
-	default 0x50000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0x50004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0x50008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
-	default 0x78000000 if DEBUG_CNS3XXX
-	default 0x7c0003f8 if FOOTBRIDGE
+	default 0x42000000 if DEBUG_GEMINI
+	default 0x44e09000 if DEBUG_AM33XXUART1
+	default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0x48022000 if DEBUG_TI81XXUART2
+	default 0x48024000 if DEBUG_TI81XXUART3
+	default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
+				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
+	default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
+				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
+	default 0x49020000 if DEBUG_OMAP3UART3
+	default 0x49042000 if DEBUG_OMAP3UART4
+	default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
+	default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+	default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
 	default 0x80010000 if DEBUG_ASM9260_UART
 	default 0x80070000 if DEBUG_IMX23_UART
 	default 0x80074000 if DEBUG_IMX28_UART
-	default 0x80230000 if DEBUG_PICOXCELL_UART
-	default 0x808c0000 if ARCH_EP93XX
+	default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
 	default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
-	default 0xc0013000 if DEBUG_U300_UART
 	default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
 	default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
-	default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
+	default 0xd0000000 if DEBUG_SPEAR3XX
 	default 0xd0012000 if DEBUG_MVEBU_UART0
 	default 0xc81004c0 if DEBUG_MESON_UARTAO
 	default 0xd4017000 if DEBUG_MMP_UART2
 	default 0xd4018000 if DEBUG_MMP_UART3
-	default 0xe0000000 if ARCH_SPEAR13XX
+	default 0xe0000000 if DEBUG_SPEAR13XX
+	default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xe4007000 if DEBUG_HIP04_UART
 	default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
 	default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+	default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2
 	default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
 	default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
 	default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
-	default 0xe8008000 if DEBUG_R7S72100_SCIF2
-	default 0xf0000be0 if ARCH_EBSA110
-	default 0xf040ab00 if DEBUG_BRCMSTB_UART
+	default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
+	default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
+	default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
+	default 0xe8009000 if DEBUG_R7S9210_SCIF4
+	default 0xf0000000 if DEBUG_DIGICOLOR_UA0
 	default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
-				ARCH_ORION5X
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
+	default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf8b00000 if DEBUG_HIX5HD2_UART
 	default 0xf991e000 if DEBUG_QCOM_UARTDM
+	default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
 	default 0xfcb00000 if DEBUG_HI3620_UART
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfe800000 if ARCH_IOP32X
+	default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
+	default 0xfed32000 if DEBUG_STIH41X_ASC2
 	default 0xff690000 if DEBUG_RK32_UART2
 	default 0xffc02000 if DEBUG_SOCFPGA_UART0
-	default 0xffc02100 if DEBUG_SOCFPGA_UART1
-	default 0xffd82340 if ARCH_IOP13XX
+	default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
 	default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
 	default 0xfff36000 if DEBUG_HIGHBANK_UART
-	default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfffe8600 if DEBUG_UART_BCM63XX
-	default 0xfffff700 if ARCH_IOP33X
+	default 0xfffb0000 if DEBUG_OMAP1UART1
+	default 0xfffb0800 if DEBUG_OMAP1UART2
+	default 0xfffb9800 if DEBUG_OMAP1UART3
+	default 0xfffe8600 if DEBUG_BCM63XX_UART
+	default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
 	depends on ARCH_EP93XX || \
 	        DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
-		DEBUG_LL_UART_EFM32 || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_NETX_UART || \
 		DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+		DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
 		DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
-		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
+		DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
+		DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
+		DEBUG_RCAR_GEN2_SCIFA2 || \
 		DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
-		DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+		DEBUG_RMOBILE_SCIFA4 || \
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_VIRT
 	hex "Virtual base address of debug UART"
-	default 0xe0000a00 if DEBUG_NETX_UART
+	default 0xc881f000 if DEBUG_RV1108_UART2
+	default 0xc8821000 if DEBUG_RV1108_UART1
+	default 0xc8912000 if DEBUG_RV1108_UART0
 	default 0xe0010fe0 if ARCH_RPC
-	default 0xf0000be0 if ARCH_EBSA110
+	default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
 	default 0xf0010000 if DEBUG_ASM9260_UART
+	default 0xf0100000 if DEBUG_DIGICOLOR_UA0
 	default 0xf01fb000 if DEBUG_NOMADIK_UART
-	default 0xf0201000 if DEBUG_BCM2835
+	default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
+	default 0xf0221000 if DEBUG_MSTARV7_PMUART
 	default 0xf1000300 if DEBUG_BCM_5301X
+	default 0xf1000400 if DEBUG_BCM_HR2
 	default 0xf1002000 if DEBUG_MT8127_UART0
 	default 0xf1006000 if DEBUG_MT6589_UART0
 	default 0xf1009000 if DEBUG_MT8135_UART3
-	default 0xf11f1000 if ARCH_VERSATILE
-	default 0xf1600000 if ARCH_INTEGRATOR
+	default 0xf1023000 if DEBUG_BCM_IPROC_UART3
+	default 0xf11f1000 if DEBUG_VERSATILE
+	default 0xf1600000 if DEBUG_INTEGRATOR
 	default 0xf1c28000 if DEBUG_SUNXI_UART0
 	default 0xf1c28400 if DEBUG_SUNXI_UART1
 	default 0xf1f02800 if DEBUG_SUNXI_R_UART
+	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xf4090000 if DEBUG_LPC32XX
+	default 0xf4200000 if DEBUG_GEMINI
 	default 0xf6200000 if DEBUG_PXA_UART1
-	default 0xf4090000 if ARCH_LPC32XX
-	default 0xf4200000 if ARCH_GEMINI
 	default 0xf7000000 if DEBUG_SUN9I_UART0
-	default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
-				DEBUG_S3C2410_UART0)
-	default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
-				DEBUG_S3C2410_UART1)
-	default 0xf7008000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART2 || \
-				DEBUG_S3C2410_UART2)
+	default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
+	default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
+	default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
+	default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
+	default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
 	default 0xf7fc9000 if DEBUG_BERLIN_UART
 	default 0xf8007000 if DEBUG_HIP04_UART
 	default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
 	default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
+	default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
+	default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
+	default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
+	default 0xf9e09000 if DEBUG_AM33XXUART1
+	default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
+	default 0xfa022000 if DEBUG_TI81XXUART2
+	default 0xfa024000 if DEBUG_TI81XXUART3
+	default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
+				DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
+	default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
+				DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
+	default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
 	default 0xfa71e000 if DEBUG_QCOM_UARTDM
-	default 0xfb002000 if DEBUG_CNS3XXX
 	default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
+	default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
+	default 0xfb020000 if DEBUG_OMAP3UART3
+	default 0xfb042000 if DEBUG_OMAP3UART4
 	default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
-	default 0xfc40ab00 if DEBUG_BRCMSTB_UART
-	default 0xfc705000 if DEBUG_ZTE_ZX
-	default 0xfcfe8600 if DEBUG_UART_BCM63XX
-	default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
-	default 0xfd000000 if ARCH_SPEAR13XX
-	default 0xfd012000 if ARCH_MV78XX0
+	default 0xfcfe8600 if DEBUG_BCM63XX_UART
+	default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
+	default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
+	default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
 	default 0xfd883000 if DEBUG_ALPINE_UART0
-	default 0xfde12000 if ARCH_DOVE
-	default 0xfe012000 if ARCH_ORION5X
-	default 0xf31004c0 if DEBUG_MESON_UARTAO
+	default 0xfdd32000 if DEBUG_STIH41X_ASC2
+	default 0xfe010000 if STM32MP1_DEBUG_UART
 	default 0xfe017000 if DEBUG_MMP_UART2
 	default 0xfe018000 if DEBUG_MMP_UART3
 	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
-	default 0xfe230000 if DEBUG_PICOXCELL_UART
 	default 0xfe300000 if DEBUG_BCM_KONA_UART
-	default 0xfe800000 if ARCH_IOP32X
 	default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
 	default 0xfeb24000 if DEBUG_RK3X_UART0
 	default 0xfeb26000 if DEBUG_RK3X_UART1
 	default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
 	default 0xfeb31000 if DEBUG_KEYSTONE_UART1
 	default 0xfec02000 if DEBUG_SOCFPGA_UART0
-	default 0xfec02100 if DEBUG_SOCFPGA_UART1
+	default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1
+	default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
 	default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
 	default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
-	default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
-	default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
-	default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
-	default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
 	default 0xfec90000 if DEBUG_RK32_UART2
 	default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
-	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
+	default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
 	default 0xfed60000 if DEBUG_RK29_UART0
 	default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
 	default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
-	default 0xfedc0000 if ARCH_EP93XX
-	default 0xfee003f8 if FOOTBRIDGE
+	default 0xfedc0000 if DEBUG_EP93XX
+	default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
 	default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
-	default 0xfee82340 if ARCH_IOP13XX
-	default 0xfef00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
-	default 0xfef00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
+	default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
+	default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
 	default 0xfef36000 if DEBUG_HIGHBANK_UART
-	default 0xfefb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
-	default 0xfefb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
-	default 0xfefb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
-	default 0xfefff700 if ARCH_IOP33X
-	default 0xff003000 if DEBUG_U300_UART
+	default 0xff0b0000 if DEBUG_OMAP1UART1
+	default 0xff0b0800 if DEBUG_OMAP1UART2
+	default 0xff0b9800 if DEBUG_OMAP1UART3
 	default 0xffd01000 if DEBUG_HIP01_UART
 	default DEBUG_UART_PHYS if !MMU
 	depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
 		DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
-		DEBUG_NETX_UART || \
-		DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
-		DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
-		DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+		DEBUG_QCOM_UARTDM || \
+		DEBUG_S3C64XX_UART || \
+		DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+		DEBUG_DIGICOLOR_UA0 || \
+		DEBUG_AT91_UART || DEBUG_STM32_UART || \
+		DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
+		DEBUG_STIH418_SBC_ASC0
 
 config DEBUG_UART_8250_SHIFT
 	int "Register offset shift for the 8250 debug UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X || \
-		DEBUG_OMAP7XXUART1 || DEBUG_OMAP7XXUART2 || DEBUG_OMAP7XXUART3
+	default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
+		DEBUG_BCM_HR2
+	default 3 if DEBUG_MSTARV7_PMUART
 	default 2
 
 config DEBUG_UART_8250_WORD
 	bool "Use 32-bit accesses for 8250 UART"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
 	depends on DEBUG_UART_8250_SHIFT >= 2
-	default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
-		DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
-		DEBUG_ALPINE_UART0 || \
-		DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
-		DEBUG_DAVINCI_DA8XX_UART2 || \
-		DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
-		DEBUG_BRCMSTB_UART
-
-config DEBUG_UART_8250_FLOW_CONTROL
-	bool "Enable flow control for 8250 UART"
+	default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
+		DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
+		DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
+		DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
+		DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
+		DEBUG_RK32_UART2
+
+config DEBUG_UART_8250_PALMCHIP
+	bool "8250 UART is Palmchip BK-310x"
 	depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
-	default y if ARCH_EBSA110 || FOOTBRIDGE || ARCH_GEMINI || ARCH_RPC
+	help
+	  Palmchip provides a UART implementation compatible with 16550
+	  except for having a different register layout.  Say Y here if
+	  the debug UART is of this type.
 
 config DEBUG_UNCOMPRESS
-	bool
-	depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
-	default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
-		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM)
+	bool "Enable decompressor debugging via DEBUG_LL output"
+	depends on !ARCH_MULTIPLATFORM
+	depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
+	depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
+		     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
+		     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
 	help
 	  This option influences the normal decompressor output for
 	  multiplatform kernels.  Normally, multiplatform kernels disable
@@ -1605,10 +1825,8 @@ config DEBUG_UNCOMPRESS
 
 config UNCOMPRESS_INCLUDE
 	string
-	default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
-					PLAT_SAMSUNG || ARM_SINGLE_ARMV7M || \
-					ARCH_SHMOBILE_LEGACY
-	default "mach/uncompress.h"
+	default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
+	default "debug/uncompress.h"
 
 config EARLY_PRINTK
 	bool "Early printk"
@@ -1633,17 +1851,4 @@ config PID_IN_CONTEXTIDR
 	  additional instructions during context switch. Say Y here only if you
 	  are planning to use hardware trace tools with this kernel.
 
-config DEBUG_SET_MODULE_RONX
-	bool "Set loadable kernel module data as NX and text as RO"
-	depends on MODULES && MMU
-	---help---
-	  This option helps catch unintended modifications to loadable
-	  kernel module's text and read-only data. It also prevents execution
-	  of module data. Such protection may interfere with run-time code
-	  patching and dynamic kernel tracing - and they might also protect
-	  against certain classes of kernel exploits.
-	  If in doubt, say "N".
-
 source "drivers/hwtracing/coresight/Kconfig"
-
-endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2c2b28ee4811..547e5856eaa0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -10,29 +10,23 @@
 #
 # Copyright (C) 1995-2001 by Russell King
 
-# Ensure linker flags are correct
-LDFLAGS		:=
-
-LDFLAGS_vmlinux	:=-p --no-undefined -X --pic-veneer
+LDFLAGS_vmlinux	:= --no-undefined -X --pic-veneer -z norelro
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux	+= --be8
-LDFLAGS_MODULE	+= --be8
-endif
-
-ifeq ($(CONFIG_ARM_MODULE_PLTS),y)
-LDFLAGS_MODULE	+= -T $(srctree)/arch/arm/kernel/module.lds
+KBUILD_LDFLAGS_MODULE	+= --be8
 endif
 
-OBJCOPYFLAGS	:=-O binary -R .comment -S
 GZFLAGS		:=-9
 #KBUILD_CFLAGS	+=-pipe
 
 # Never generate .eh_frame
 KBUILD_CFLAGS	+= $(call cc-option,-fno-dwarf2-cfi-asm)
 
-# Do not use arch/arm/defconfig - it's always outdated.
-# Select a platform tht is kept up-to-date
-KBUILD_DEFCONFIG := versatile_defconfig
+# Disable FDPIC ABI
+KBUILD_CFLAGS	+= $(call cc-option,-mno-fdpic)
+
+# This should work on most of the modern platforms
+KBUILD_DEFCONFIG := multi_v7_defconfig
 
 # defines filename extension depending memory management type.
 ifeq ($(CONFIG_MMU),)
@@ -41,17 +35,20 @@ KBUILD_CFLAGS	+= $(call cc-option,-mno-unaligned-access)
 endif
 
 ifeq ($(CONFIG_FRAME_POINTER),y)
-KBUILD_CFLAGS	+=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
+KBUILD_CFLAGS	+=-fno-omit-frame-pointer
+ifeq ($(CONFIG_CC_IS_GCC),y)
+KBUILD_CFLAGS += -mapcs -mno-sched-prolog
+endif
 endif
 
 ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
 KBUILD_CPPFLAGS	+= -mbig-endian
-AS		+= -EB
-LD		+= -EB
+CHECKFLAGS	+= -D__ARMEB__
+KBUILD_LDFLAGS	+= -EB
 else
 KBUILD_CPPFLAGS	+= -mlittle-endian
-AS		+= -EL
-LD		+= -EL
+CHECKFLAGS	+= -D__ARMEL__
+KBUILD_LDFLAGS	+= -EL
 endif
 
 #
@@ -63,50 +60,57 @@ endif
 KBUILD_CFLAGS	+= $(call cc-option,-fno-ipa-sra)
 
 # This selects which instruction set is used.
+arch-$(CONFIG_CPU_32v7M)	:=-march=armv7-m
+arch-$(CONFIG_CPU_32v7)		:=-march=armv7-a
+arch-$(CONFIG_CPU_32v6)		:=-march=armv6
+# Only override the compiler option if ARMv6. The ARMv6K extensions are
+# always available in ARMv7
+ifeq ($(CONFIG_CPU_32v6),y)
+arch-$(CONFIG_CPU_32v6K)	:=-march=armv6k
+endif
+arch-$(CONFIG_CPU_32v5)		:=-march=armv5te
+arch-$(CONFIG_CPU_32v4T)	:=-march=armv4t
+arch-$(CONFIG_CPU_32v4)		:=-march=armv4
+arch-$(CONFIG_CPU_32v3)		:=-march=armv3m
+
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7M)	=-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
-arch-$(CONFIG_CPU_32v7)		=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-arch-$(CONFIG_CPU_32v6)		=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+cpp-$(CONFIG_CPU_32v7M)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7
+cpp-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7
 ifeq ($(CONFIG_CPU_32v6),y)
-arch-$(CONFIG_CPU_32v6K)	=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
+cpp-$(CONFIG_CPU_32v6K)		:=-D__LINUX_ARM_ARCH__=6
 endif
-arch-$(CONFIG_CPU_32v5)		=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
-arch-$(CONFIG_CPU_32v4T)	=-D__LINUX_ARM_ARCH__=4 -march=armv4t
-arch-$(CONFIG_CPU_32v4)		=-D__LINUX_ARM_ARCH__=4 -march=armv4
-arch-$(CONFIG_CPU_32v3)		=-D__LINUX_ARM_ARCH__=3 -march=armv3
-
-# Evaluate arch cc-option calls now
-arch-y := $(arch-y)
+cpp-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5
+cpp-$(CONFIG_CPU_32v4T)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4
+cpp-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3
 
 # This selects how we optimise for the processor.
-tune-$(CONFIG_CPU_ARM7TDMI)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM720T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM740T)	=-mtune=arm7tdmi
-tune-$(CONFIG_CPU_ARM9TDMI)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM940T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM946E)	=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi)
-tune-$(CONFIG_CPU_ARM920T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM922T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM925T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_ARM926T)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_FA526)	=-mtune=arm9tdmi
-tune-$(CONFIG_CPU_SA110)	=-mtune=strongarm110
-tune-$(CONFIG_CPU_SA1100)	=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_XSC3)		=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale
-tune-$(CONFIG_CPU_FEROCEON)	=$(call cc-option,-mtune=marvell-f,-mtune=xscale)
-tune-$(CONFIG_CPU_V6)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-tune-$(CONFIG_CPU_V6K)		=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm)
-
-# Evaluate tune cc-option calls now
-tune-y := $(tune-y)
+tune-$(CONFIG_CPU_ARM7TDMI)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM720T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM740T)	:=-mtune=arm7tdmi
+tune-$(CONFIG_CPU_ARM9TDMI)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM940T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM946E)	:=-mtune=arm9e
+tune-$(CONFIG_CPU_ARM920T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM925T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_FA526)	:=-mtune=arm9tdmi
+tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
+tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
+tune-$(CONFIG_CPU_XSC3)		:=-mtune=xscale
+tune-$(CONFIG_CPU_FEROCEON)	:=-mtune=xscale
+tune-$(CONFIG_CPU_V6)		:=-mtune=arm1136j-s
+tune-$(CONFIG_CPU_V6K)		:=-mtune=arm1136j-s
 
 ifeq ($(CONFIG_AEABI),y)
-CFLAGS_ABI	:=-mabi=aapcs-linux -mno-thumb-interwork -mfpu=vfp
+CFLAGS_ABI	:=-mabi=aapcs-linux -mfpu=vfp
 else
 CFLAGS_ABI	:=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,)
 endif
@@ -115,70 +119,75 @@ ifeq ($(CONFIG_ARM_UNWIND),y)
 CFLAGS_ABI	+=-funwind-tables
 endif
 
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
+ifeq ($(CONFIG_CC_IS_CLANG),y)
+CFLAGS_ABI	+= -meabi gnu
+endif
+
+ifeq ($(CONFIG_CURRENT_POINTER_IN_TPIDRURO),y)
+KBUILD_CFLAGS	+= -mtp=cp15
+endif
+
+# Accept old syntax despite ".syntax unified"
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
-CFLAGS_ISA	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
+
+ifeq ($(CONFIG_THUMB2_KERNEL),y)
+CFLAGS_ISA	:=-Wa,-mimplicit-it=always $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA) -Wa$(comma)-mthumb
-# Work around buggy relocation from gas if requested:
-ifeq ($(CONFIG_THUMB2_AVOID_R_ARM_THM_JUMP11),y)
-CFLAGS_MODULE	+=-fno-optimize-sibling-calls
-endif
+CFLAGS_ISA	+=-mthumb
 else
-CFLAGS_ISA	:=$(call cc-option,-marm,)
+CFLAGS_ISA	:=$(call cc-option,-marm,) $(AFLAGS_NOWARN)
 AFLAGS_ISA	:=$(CFLAGS_ISA)
 endif
 
 # Need -Uarm for gcc < 3.x
+KBUILD_CPPFLAGS	+=$(cpp-y)
 KBUILD_CFLAGS	+=$(CFLAGS_ABI) $(CFLAGS_ISA) $(arch-y) $(tune-y) $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -msoft-float -Uarm
-KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) $(arch-y) $(tune-y) -include asm/unified.h -msoft-float
+KBUILD_AFLAGS	+=$(CFLAGS_ABI) $(AFLAGS_ISA) -Wa,$(arch-y) $(tune-y) -include asm/unified.h -msoft-float
 
 CHECKFLAGS	+= -D__arm__
 
-#Default value
-head-y		:= arch/arm/kernel/head$(MMUEXT).o
-
 # Text offset. This list is sorted numerically by address in order to
 # provide a means to avoid/resolve conflicts in multi-arch kernels.
+# Note: the 32kB below this value is reserved for use by the kernel
+# during boot, and this offset is critical to the functioning of
+# kexec-tools.
 textofs-y	:= 0x00008000
-textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
-# We don't want the htc bootloader to corrupt kernel during resume
-textofs-$(CONFIG_PM_H1940)      := 0x00108000
+# RTD1195 has Boot ROM at start of address space
+textofs-$(CONFIG_ARCH_REALTEK)  := 0x00108000
 # SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
 ifeq ($(CONFIG_ARCH_SA1100),y)
 textofs-$(CONFIG_SA1111) := 0x00208000
 endif
+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
 textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
+textofs-$(CONFIG_ARCH_MESON) := 0x00208000
 textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
 
 # Machine directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_ACTIONS)		+= actions
+machine-$(CONFIG_ARCH_AIROHA)		+= airoha
 machine-$(CONFIG_ARCH_ALPINE)		+= alpine
+machine-$(CONFIG_ARCH_ARTPEC)		+= artpec
+machine-$(CONFIG_ARCH_ASPEED)           += aspeed
 machine-$(CONFIG_ARCH_AT91)		+= at91
 machine-$(CONFIG_ARCH_AXXIA)		+= axxia
 machine-$(CONFIG_ARCH_BCM)		+= bcm
 machine-$(CONFIG_ARCH_BERLIN)		+= berlin
 machine-$(CONFIG_ARCH_CLPS711X)		+= clps711x
-machine-$(CONFIG_ARCH_CNS3XXX)		+= cns3xxx
 machine-$(CONFIG_ARCH_DAVINCI)		+= davinci
 machine-$(CONFIG_ARCH_DIGICOLOR)	+= digicolor
 machine-$(CONFIG_ARCH_DOVE)		+= dove
-machine-$(CONFIG_ARCH_EBSA110)		+= ebsa110
-machine-$(CONFIG_ARCH_EFM32)		+= efm32
 machine-$(CONFIG_ARCH_EP93XX)		+= ep93xx
 machine-$(CONFIG_ARCH_EXYNOS)		+= exynos
 machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_INTEGRATOR)	+= integrator
-machine-$(CONFIG_ARCH_IOP13XX)		+= iop13xx
-machine-$(CONFIG_ARCH_IOP32X)		+= iop32x
-machine-$(CONFIG_ARCH_IOP33X)		+= iop33x
+machine-$(CONFIG_ARCH_HPE)		+= hpe
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
-machine-$(CONFIG_ARCH_KS8695)		+= ks8695
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
 machine-$(CONFIG_ARCH_LPC32XX)		+= lpc32xx
 machine-$(CONFIG_ARCH_MESON)		+= meson
@@ -188,129 +197,93 @@ machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
 machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
 machine-$(CONFIG_ARCH_MXC)		+= imx
 machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
+machine-$(CONFIG_ARCH_MILBEAUT)		+= milbeaut
 machine-$(CONFIG_ARCH_MXS)		+= mxs
-machine-$(CONFIG_ARCH_NETX)		+= netx
+machine-$(CONFIG_ARCH_MSTARV7)		+= mstar
 machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
+machine-$(CONFIG_ARCH_NPCM)		+= npcm
 machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
 machine-$(CONFIG_ARCH_OMAP1)		+= omap1
 machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
 machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
-machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
 machine-$(CONFIG_ARCH_PXA)		+= pxa
 machine-$(CONFIG_ARCH_QCOM)		+= qcom
-machine-$(CONFIG_ARCH_REALVIEW)		+= realview
+machine-$(CONFIG_ARCH_REALTEK)		+= realtek
 machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
 machine-$(CONFIG_ARCH_RPC)		+= rpc
-machine-$(CONFIG_ARCH_S3C24XX)		+= s3c24xx
-machine-$(CONFIG_ARCH_S3C64XX)		+= s3c64xx
+machine-$(CONFIG_PLAT_SAMSUNG)		+= s3c
 machine-$(CONFIG_ARCH_S5PV210)		+= s5pv210
 machine-$(CONFIG_ARCH_SA1100)		+= sa1100
-machine-$(CONFIG_ARCH_SHMOBILE) 	+= shmobile
-machine-$(CONFIG_ARCH_SIRF)		+= prima2
-machine-$(CONFIG_ARCH_SOCFPGA)		+= socfpga
+machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
+machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
+machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
-machine-$(CONFIG_ARCH_U300)		+= u300
 machine-$(CONFIG_ARCH_U8500)		+= ux500
-machine-$(CONFIG_ARCH_UNIPHIER)		+= uniphier
-machine-$(CONFIG_ARCH_VERSATILE)	+= versatile
-machine-$(CONFIG_ARCH_VEXPRESS)		+= vexpress
 machine-$(CONFIG_ARCH_VT8500)		+= vt8500
-machine-$(CONFIG_ARCH_W90X900)		+= w90x900
-machine-$(CONFIG_ARCH_ZX)		+= zx
 machine-$(CONFIG_ARCH_ZYNQ)		+= zynq
+machine-$(CONFIG_PLAT_VERSATILE)	+= versatile
 machine-$(CONFIG_PLAT_SPEAR)		+= spear
 
-# Platform directory name.  This list is sorted alphanumerically
-# by CONFIG_* macro name.
-plat-$(CONFIG_ARCH_EXYNOS)	+= samsung
-plat-$(CONFIG_ARCH_OMAP)	+= omap
-plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
-plat-$(CONFIG_ARCH_S5PV210)	+= samsung
-plat-$(CONFIG_PLAT_IOP)		+= iop
-plat-$(CONFIG_PLAT_ORION)	+= orion
-plat-$(CONFIG_PLAT_PXA)		+= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	+= samsung
-plat-$(CONFIG_PLAT_VERSATILE)	+= versatile
-
-ifeq ($(CONFIG_ARCH_EBSA110),y)
-# This is what happens if you forget the IOCS16 line.
-# PCMCIA cards stop working.
-CFLAGS_3c589_cs.o :=-DISA_SIXTEEN_BIT_PERIPHERAL
-export CFLAGS_3c589_cs.o
-endif
+# legacy platforms provide their own mach/*.h headers globally,
+# these three are mutually exclusive
+machdirs-$(CONFIG_ARCH_FOOTBRIDGE)	+= arch/arm/mach-footbridge
+machdirs-$(CONFIG_ARCH_RPC)		+= arch/arm/mach-rpc
+machdirs-$(CONFIG_ARCH_SA1100)		+= arch/arm/mach-sa1100
+KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%/include,$(machdirs-y))
 
 # The byte offset of the kernel image in RAM from the start of RAM.
 TEXT_OFFSET := $(textofs-y)
 
-# The first directory contains additional information for the boot setup code
-ifneq ($(machine-y),)
-MACHINE  := arch/arm/mach-$(word 1,$(machine-y))/
-else
-MACHINE  :=
-endif
-ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-MACHINE  :=
-endif
-
-machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
-platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
-
-ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y)
-ifeq ($(KBUILD_SRC),)
-KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs))
-else
-KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs))
-endif
-endif
-
 export	TEXT_OFFSET GZFLAGS MMUEXT
 
-# Do we have FASTFPE?
-FASTFPE		:=arch/arm/fastfpe
-ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
-FASTFPE_OBJ	:=$(FASTFPE)/
-endif
-
-core-$(CONFIG_FPE_NWFPE)	+= arch/arm/nwfpe/
-core-$(CONFIG_FPE_FASTFPE)	+= $(FASTFPE_OBJ)
-core-$(CONFIG_VFP)		+= arch/arm/vfp/
-core-$(CONFIG_XEN)		+= arch/arm/xen/
-core-$(CONFIG_KVM_ARM_HOST) 	+= arch/arm/kvm/
-core-$(CONFIG_VDSO)		+= arch/arm/vdso/
-
 # If we have a machine-specific directory, then include it in the build.
-core-y				+= arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
-core-y				+= arch/arm/probes/
-core-y				+= arch/arm/net/
-core-y				+= arch/arm/crypto/
-core-y				+= arch/arm/firmware/
-core-y				+= $(machdirs) $(platdirs)
+core-y				+= $(patsubst %,arch/arm/mach-%/,$(machine-y))
+# For cleaning
+core-				+= $(patsubst %,arch/arm/mach-%/,$(machine-))
 
-drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
+core-$(CONFIG_PLAT_ORION)	+= arch/arm/plat-orion/
 
 libs-y				:= arch/arm/lib/ $(libs-y)
 
 # Default target when executing plain make
+boot := arch/arm/boot
 ifeq ($(CONFIG_XIP_KERNEL),y)
-KBUILD_IMAGE := xipImage
+KBUILD_IMAGE := $(boot)/xipImage
 else
-KBUILD_IMAGE := zImage
+KBUILD_IMAGE := $(boot)/zImage
 endif
 
-# Build the DT binary blobs if we have OF configured
-ifeq ($(CONFIG_USE_OF),y)
-KBUILD_DTBS := dtbs
+ifeq ($(CONFIG_STACKPROTECTOR_PER_TASK),y)
+prepare: stack_protector_prepare
+ifeq ($(CONFIG_CC_HAVE_STACKPROTECTOR_TLS),y)
+stack_protector_prepare: prepare0
+	$(eval KBUILD_CFLAGS += \
+		-mstack-protector-guard=tls \
+		-mstack-protector-guard-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				include/generated/asm-offsets.h))
+else
+stack_protector_prepare: prepare0
+	$(eval SSP_PLUGIN_CFLAGS := \
+		-fplugin-arg-arm_ssp_per_task_plugin-offset=$(shell	\
+			awk '{if ($$2 == "TSK_STACK_CANARY") print $$3;}'\
+				include/generated/asm-offsets.h))
+	$(eval KBUILD_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+	$(eval GCC_PLUGINS_CFLAGS += $(SSP_PLUGIN_CFLAGS))
+endif
 endif
 
-all:	$(KBUILD_IMAGE) $(KBUILD_DTBS)
+all:	$(notdir $(KBUILD_IMAGE))
 
-boot := arch/arm/boot
+
+archheaders:
+	$(Q)$(MAKE) $(build)=arch/arm/tools uapi
 
 archprepare:
-	$(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h
+	$(Q)$(MAKE) $(build)=arch/arm/tools kapi
 
 # Convert bzImage to zImage
 bzImage: zImage
@@ -324,21 +297,12 @@ bootpImage uImage: zImage
 zImage: Image
 
 $(BOOT_TARGETS): vmlinux
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@
+	$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
+	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
+$(INSTALL_TARGETS): KBUILD_IMAGE = $(boot)/$(patsubst %install,%Image,$@)
 $(INSTALL_TARGETS):
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
-
-%.dtb: | scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
-
-PHONY += dtbs dtbs_install
-
-dtbs: prepare scripts
-	$(Q)$(MAKE) $(build)=$(boot)/dts
-
-dtbs_install:
-	$(Q)$(MAKE) $(dtbinst)=$(boot)/dts
+	$(call cmd,install)
 
 PHONY += vdso_install
 vdso_install:
@@ -346,14 +310,13 @@ ifeq ($(CONFIG_VDSO),y)
 	$(Q)$(MAKE) $(build)=arch/arm/vdso $@
 endif
 
-# We use MRPROPER_FILES and CLEAN_FILES now
-archclean:
-	$(Q)$(MAKE) $(clean)=$(boot)
-
 # My testing targets (bypasses dependencies)
-bp:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
-i zi:;	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+bp:;	$(Q)$(MAKE) $(build)=$(boot) $(boot)/bootpImage
 
+include $(srctree)/scripts/Makefile.defconf
+PHONY += multi_v7_lpae_defconfig
+multi_v7_lpae_defconfig:
+	$(call merge_into_defconfig,multi_v7_defconfig,lpae)
 
 define archhelp
   echo  '* zImage        - Compressed kernel image (arch/$(ARCH)/boot/zImage)'
@@ -362,8 +325,6 @@ define archhelp
   echo  '  uImage        - U-Boot wrapped zImage'
   echo  '  bootpImage    - Combined zImage and initial RAM disk'
   echo  '                  (supply initrd image via make variable INITRD=<path>)'
-  echo  '* dtbs          - Build device tree blobs for enabled boards'
-  echo  '  dtbs_install  - Install dtbs to $(INSTALL_DTBS_PATH)'
   echo  '  install       - Install uncompressed kernel'
   echo  '  zinstall      - Install compressed kernel'
   echo  '  uinstall      - Install U-Boot wrapped compressed kernel'
@@ -371,4 +332,6 @@ define archhelp
   echo  '                  (distribution) /sbin/$(INSTALLKERNEL) or'
   echo  '                  install to $$(INSTALL_PATH) and run lilo'
   echo  '  vdso_install  - Install unstripped vdso.so to $$(INSTALL_MOD_PATH)/vdso'
+  echo
+  echo  '  multi_v7_lpae_defconfig     - multi_v7_defconfig with CONFIG_ARM_LPAE enabled'
 endef
diff --git a/arch/arm/boot/.gitignore b/arch/arm/boot/.gitignore
index 3c79f85975aa..8c759326baf4 100644
--- a/arch/arm/boot/.gitignore
+++ b/arch/arm/boot/.gitignore
@@ -1,6 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0-only
 Image
 zImage
 xipImage
 bootpImage
 uImage
-*.dtb
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 9eca7aee927f..abd6a2889fd0 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -10,28 +10,35 @@
 #
 # Copyright (C) 1995-2002 Russell King
 #
+OBJCOPYFLAGS	:=-O binary -R .comment -S
 
-ifneq ($(MACHINE),)
-include $(MACHINE)/Makefile.boot
-endif
-
-# Note: the following conditions must always be true:
 #   ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
-#   PARAMS_PHYS must be within 4MB of ZRELADDR
-#   INITRD_PHYS must be in RAM
-ZRELADDR    := $(zreladdr-y)
-PARAMS_PHYS := $(params_phys-y)
-INITRD_PHYS := $(initrd_phys-y)
+ifdef CONFIG_PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+ZRELADDR    := $(call add_hex, $(CONFIG_PHYS_OFFSET), $(TEXT_OFFSET))
+endif
 
-export ZRELADDR INITRD_PHYS PARAMS_PHYS
+PHYS_OFFSET := $(CONFIG_PHYS_OFFSET)
+export ZRELADDR PARAMS_PHYS PHYS_OFFSET
 
 targets := Image zImage xipImage bootpImage uImage
 
 ifeq ($(CONFIG_XIP_KERNEL),y)
 
+cmd_deflate_xip_data = $(CONFIG_SHELL) -c \
+	'$(srctree)/$(src)/deflate_xip_data.sh $< $@'
+
+ifeq ($(CONFIG_XIP_DEFLATED_DATA),y)
+quiet_cmd_mkxip = XIPZ    $@
+cmd_mkxip = $(cmd_objcopy) && $(cmd_deflate_xip_data)
+else
+quiet_cmd_mkxip = $(quiet_cmd_objcopy)
+cmd_mkxip = $(cmd_objcopy)
+endif
+
 $(obj)/xipImage: vmlinux FORCE
-	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))'
+	$(call if_changed,mkxip)
+	@$(kecho) '  Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
 
 $(obj)/Image $(obj)/zImage: FORCE
 	@echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)'
@@ -46,14 +53,12 @@ $(obj)/xipImage: FORCE
 
 $(obj)/Image: vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
 
 $(obj)/compressed/vmlinux: $(obj)/Image FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/compressed $@
 
 $(obj)/zImage:	$(obj)/compressed/vmlinux FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
 
 endif
 
@@ -78,41 +83,11 @@ fi
 $(obj)/uImage:	$(obj)/zImage FORCE
 	@$(check_for_multiple_loadaddr)
 	$(call if_changed,uimage)
-	@$(kecho) '  Image $@ is ready'
 
-$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
+$(obj)/bootp/bootp: $(obj)/zImage FORCE
 	$(Q)$(MAKE) $(build)=$(obj)/bootp $@
-	@:
 
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
-	@$(kecho) '  Kernel: $@ is ready'
-
-PHONY += initrd FORCE
-initrd:
-	@test "$(INITRD_PHYS)" != "" || \
-	(echo This machine does not support INITRD; exit -1)
-	@test "$(INITRD)" != "" || \
-	(echo You must specify INITRD; exit -1)
-
-install:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-uinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/uImage System.map "$(INSTALL_PATH)"
-
-zi:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-i:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
 
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/bootp/Makefile b/arch/arm/boot/bootp/Makefile
index 5761f0039133..a2934e6fd89a 100644
--- a/arch/arm/boot/bootp/Makefile
+++ b/arch/arm/boot/bootp/Makefile
@@ -1,13 +1,45 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # linux/arch/arm/boot/bootp/Makefile
 #
 # This file is included by the global makefile so that you can add your own
 # architecture-specific flags and dependencies.
 #
-
 GCOV_PROFILE	:= n
 
-LDFLAGS_bootp	:=-p --no-undefined -X \
+ifdef PHYS_OFFSET
+add_hex = $(shell printf 0x%x $$(( $(1) + $(2) )) )
+
+# If PHYS_OFFSET is set, INITRD_PHYS and PARAMS_PHYS can be derived,
+# otherwise they must be passed on the command line.
+#
+# Note: the following conditions must always be true:
+#   PARAMS_PHYS must be within 4MB of ZRELADDR
+#   INITRD_PHYS must be in RAM
+
+PARAMS_PHYS := $(call add_hex, $(PHYS_OFFSET), 0x100)
+
+# guess an initrd location if possible
+initrd_offset-$(CONFIG_ARCH_FOOTBRIDGE)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_SA1100)	+= 0x00800000
+initrd_offset-$(CONFIG_ARCH_RPC)	+= 0x08000000
+INITRD_OFFSET := $(initrd_offset-y)
+ifdef INITRD_OFFSET
+INITRD_PHYS := $(call add_hex, $(PHYS_OFFSET), $(INITRD_OFFSET))
+endif
+
+endif
+
+PHONY += initrd
+initrd:
+	@test "$(PARAMS_PHYS)" != "" || \
+	(echo bootpImage: You must specify PHYS_OFFSET of PARAMS_PHYS ; exit -1)
+	@test "$(INITRD_PHYS)" != "" || \
+	(echo bootpImage: You must specify INITRD_OFFSET or INITRD_PHYS ; exit -1)
+	@test "$(INITRD)" != "" || \
+	(echo bootpImage: You must specify INITRD; exit -1)
+
+LDFLAGS_bootp	:= --no-undefined -X \
 		 --defsym initrd_phys=$(INITRD_PHYS) \
 		 --defsym params_phys=$(PARAMS_PHYS) -T
 AFLAGS_initrd.o :=-DINITRD=\"$(INITRD)\"
@@ -17,13 +49,12 @@ targets	:= bootp init.o kernel.o initrd.o
 # Note that bootp.lds picks up kernel.o and initrd.o
 $(obj)/bootp:	$(src)/bootp.lds $(addprefix $(obj)/,init.o kernel.o initrd.o) FORCE
 	$(call if_changed,ld)
-	@:
 
 # kernel.o and initrd.o includes a binary image using
 # .incbin, a dependency which is not tracked automatically
 
 $(obj)/kernel.o: arch/arm/boot/zImage FORCE
 
-$(obj)/initrd.o: $(INITRD) FORCE
+$(obj)/initrd.o: initrd $(INITRD) FORCE
 
-PHONY += $(INITRD) FORCE
+PHONY += $(INITRD)
diff --git a/arch/arm/boot/bootp/bootp.lds b/arch/arm/boot/bootp/bootp.lds
index fc54394f4340..160128186bf8 100644
--- a/arch/arm/boot/bootp/bootp.lds
+++ b/arch/arm/boot/bootp/bootp.lds
@@ -1,11 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/bootp.lds
  *
  *  Copyright (C) 2000-2002 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 OUTPUT_ARCH(arm)
 ENTRY(_start)
diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index 78b508075161..b562da2f7040 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/bootp/init.S
  *
  *  Copyright (C) 2000-2003 Russell King.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  *  "Header" file for splitting kernel + initrd.  Note that we pass
  *  r0 through to r3 straight through.
  *
@@ -16,7 +13,7 @@
  *  size immediately following the kernel, we could build this into
  *  a binary blob, and concatenate the zImage using the cat command.
  */
-		.section .start,#alloc,#execinstr
+		.section .start, "ax"
 		.type	_start, #function
 		.globl	_start
 
@@ -44,7 +41,7 @@ _start:		add	lr, pc, #-0x8		@ lr = current load addr
  */
 		movne	r10, #0			@ terminator
 		movne	r4, #2			@ Size of this entry (2 words)
-		stmneia	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
+		stmiane	r9, {r4, r5, r10}	@ Size, ATAG_CORE, terminator
 
 /*
  * find the end of the tag list, and then add an INITRD tag on the end.
diff --git a/arch/arm/boot/bootp/initrd.S b/arch/arm/boot/bootp/initrd.S
index d81ea183785c..dd3d04971c42 100644
--- a/arch/arm/boot/bootp/initrd.S
+++ b/arch/arm/boot/bootp/initrd.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 	.type	initrd_start,#object
 	.globl	initrd_start
 initrd_start:
diff --git a/arch/arm/boot/bootp/kernel.S b/arch/arm/boot/bootp/kernel.S
index b87a25c7ef88..dc6236c173d2 100644
--- a/arch/arm/boot/bootp/kernel.S
+++ b/arch/arm/boot/bootp/kernel.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 	.globl	kernel_start
 kernel_start:
 	.incbin	"arch/arm/boot/zImage"
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index 0714e0334e33..d32f41778437 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -1,21 +1,4 @@
-ashldi3.S
-bswapsdi2.S
-font.c
-lib1funcs.S
-hyp-stub.S
-piggy.gzip
-piggy.lzo
-piggy.lzma
-piggy.xzkern
-piggy.lz4
+# SPDX-License-Identifier: GPL-2.0-only
+piggy_data
 vmlinux
 vmlinux.lds
-
-# borrowed libfdt files
-fdt.c
-fdt.h
-fdt_ro.c
-fdt_rw.c
-fdt_wip.c
-libfdt.h
-libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 7a13aebacf81..726ecabcef09 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -1,3 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
 #
 # linux/arch/arm/boot/compressed/Makefile
 #
@@ -6,13 +7,12 @@
 
 OBJS		=
 
-AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
 HEAD	= head.o
 OBJS	+= misc.o decompress.o
 ifeq ($(CONFIG_DEBUG_UNCOMPRESS),y)
 OBJS	+= debug.o
+AFLAGS_head.o += -DDEBUG
 endif
-FONTC	= $(srctree)/lib/fonts/font_acorn_8x8.c
 
 # string library code (-Os is enforced to keep it much smaller)
 OBJS		+= string.o
@@ -23,6 +23,11 @@ OBJS		+= hyp-stub.o
 endif
 
 GCOV_PROFILE		:= n
+KASAN_SANITIZE		:= n
+
+# Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
+KCOV_INSTRUMENT		:= n
+UBSAN_SANITIZE		:= n
 
 #
 # Architecture dependencies
@@ -51,10 +56,6 @@ else
 endif
 endif
 
-ifeq ($(CONFIG_ARCH_SHMOBILE_LEGACY),y)
-OBJS		+= head-shmobile.o
-endif
-
 #
 # We now have a PIC decompressor implementation.  Decompressors running
 # from RAM should not define ZTEXTADDR.  Decompressors running directly
@@ -68,54 +69,47 @@ ZTEXTADDR	:= 0
 ZBSSADDR	:= ALIGN(8)
 endif
 
-CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
-
-suffix_$(CONFIG_KERNEL_GZIP) = gzip
-suffix_$(CONFIG_KERNEL_LZO)  = lzo
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-suffix_$(CONFIG_KERNEL_XZ)   = xzkern
-suffix_$(CONFIG_KERNEL_LZ4)  = lz4
-
-# Borrowed libfdt files for the ATAG compatibility mode
+MALLOC_SIZE	:= 65536
 
-libfdt		:= fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
-libfdt_hdrs	:= fdt.h libfdt.h libfdt_internal.h
-
-libfdt_objs	:= $(addsuffix .o, $(basename $(libfdt)))
+AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) -DMALLOC_SIZE=$(MALLOC_SIZE)
+CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
+CPPFLAGS_vmlinux.lds += -DTEXT_OFFSET="$(TEXT_OFFSET)"
+CPPFLAGS_vmlinux.lds += -DMALLOC_SIZE="$(MALLOC_SIZE)"
 
-$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
-	$(call cmd,shipped)
+compress-$(CONFIG_KERNEL_GZIP) = gzip
+compress-$(CONFIG_KERNEL_LZO)  = lzo_with_size
+compress-$(CONFIG_KERNEL_LZMA) = lzma_with_size
+compress-$(CONFIG_KERNEL_XZ)   = xzkern_with_size
+compress-$(CONFIG_KERNEL_LZ4)  = lz4_with_size
 
-$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
-	$(addprefix $(obj)/,$(libfdt_hdrs))
+libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
+ifeq ($(CONFIG_USE_OF),y)
+OBJS	+= $(libfdt_objs) fdt_check_mem_start.o
+endif
 
-targets       := vmlinux vmlinux.lds \
-		 piggy.$(suffix_y) piggy.$(suffix_y).o \
-		 lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
-		 bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
+OBJS	+= lib1funcs.o ashldi3.o bswapsdi2.o
 
-# Make sure files are removed during clean
-extra-y       += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
-		 lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
-		 hyp-stub.S
+targets       := vmlinux vmlinux.lds piggy_data piggy.o \
+		 head.o $(OBJS)
 
 KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
 
-ifeq ($(CONFIG_FUNCTION_TRACER),y)
-ORIG_CFLAGS := $(KBUILD_CFLAGS)
-KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
-endif
-
-ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
+ccflags-y := -fpic $(call cc-option,-mno-single-pic-base,) -fno-builtin \
+	     -I$(srctree)/scripts/dtc/libfdt -fno-stack-protector \
+	     -I$(obj) $(DISABLE_ARM_SSP_PER_TASK_PLUGIN)
+ccflags-remove-$(CONFIG_FUNCTION_TRACER) += -pg
 asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
-		awk 'END{print $$3}')
+KBSS_SZ = $(shell echo $$(($$($(NM) vmlinux | \
+		sed -n -e 's/^\([^ ]*\) [ABD] __bss_start$$/-0x\1/p' \
+		       -e 's/^\([^ ]*\) [ABD] __bss_stop$$/+0x\1/p') )) )
 LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
 # Supply ZRELADDR to the decompressor via a linker symbol.
 ifneq ($(CONFIG_AUTO_ZRELADDR),y)
@@ -124,33 +118,17 @@ endif
 ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
 LDFLAGS_vmlinux += --be8
 endif
-# ?
-LDFLAGS_vmlinux += -p
 # Report unresolved symbol references
 LDFLAGS_vmlinux += --no-undefined
 # Delete all temporary local symbols
 LDFLAGS_vmlinux += -X
+# Report orphan sections
+ifdef CONFIG_LD_ORPHAN_WARN
+LDFLAGS_vmlinux += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
+endif
 # Next argument is a linker script
 LDFLAGS_vmlinux += -T
 
-# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
-	$(call cmd,shipped)
-
-# For __aeabi_llsl
-ashldi3 = $(obj)/ashldi3.o
-
-$(obj)/ashldi3.S: $(srctree)/arch/$(SRCARCH)/lib/ashldi3.S
-	$(call cmd,shipped)
-
-# For __bswapsi2, __bswapdi2
-bswapsdi2 = $(obj)/bswapsdi2.o
-
-$(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
-	$(call cmd,shipped)
-
 # We need to prevent any GOTOFF relocs being used with references
 # to symbols in the .bss section since we cannot relocate them
 # independently from the rest at run time.  This can be achieved by
@@ -159,10 +137,10 @@ $(obj)/bswapsdi2.S: $(srctree)/arch/$(SRCARCH)/lib/bswapsdi2.S
 # The .data section is already discarded by the linker script so no need
 # to bother about it here.
 check_for_bad_syms = \
-bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
+bad_syms=$$($(NM) $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
 [ -z "$$bad_syms" ] || \
   ( echo "following symbols must have non local/private scope:" >&2; \
-    echo "$$bad_syms" >&2; rm -f $@; false )
+    echo "$$bad_syms" >&2; false )
 
 check_for_multiple_zreladdr = \
 if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
@@ -171,22 +149,18 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 	false; \
 fi
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
-		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) FORCE
+efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
+		$(addprefix $(obj)/, $(OBJS)) \
+		$(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
 
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
-	$(call if_changed,$(suffix_y))
+$(obj)/piggy_data: $(obj)/../Image FORCE
+	$(call if_changed,$(compress-y))
 
-$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
+$(obj)/piggy.o: $(obj)/piggy_data
 
 CFLAGS_font.o := -Dstatic=
-
-$(obj)/font.c: $(FONTC)
-	$(call cmd,shipped)
-
-$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S
-	$(call cmd,shipped)
diff --git a/arch/arm/boot/compressed/ashldi3.S b/arch/arm/boot/compressed/ashldi3.S
new file mode 100644
index 000000000000..216f82eda609
--- /dev/null
+++ b/arch/arm/boot/compressed/ashldi3.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_llsl */
+#include "../../lib/ashldi3.S"
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
index 9448aa0c6686..1feb6b0f7a1f 100644
--- a/arch/arm/boot/compressed/atags_to_fdt.c
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -1,3 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/libfdt_env.h>
 #include <asm/setup.h>
 #include <libfdt.h>
 
@@ -13,12 +15,13 @@ static int node_offset(void *fdt, const char *node_path)
 {
 	int offset = fdt_path_offset(fdt, node_path);
 	if (offset == -FDT_ERR_NOTFOUND)
-		offset = fdt_add_subnode(fdt, 0, node_path);
+		/* Add the node to root if not found, dropping the leading '/' */
+		offset = fdt_add_subnode(fdt, 0, node_path + 1);
 	return offset;
 }
 
 static int setprop(void *fdt, const char *node_path, const char *property,
-		   uint32_t *val_array, int size)
+		   void *val_array, int size)
 {
 	int offset = node_offset(fdt, node_path);
 	if (offset < 0)
@@ -59,7 +62,7 @@ static uint32_t get_cell_size(const void *fdt)
 {
 	int len;
 	uint32_t cell_size = 1;
-	const uint32_t *size_len =  getprop(fdt, "/", "#size-cells", &len);
+	const __be32 *size_len =  getprop(fdt, "/", "#size-cells", &len);
 
 	if (size_len)
 		cell_size = fdt32_to_cpu(*size_len);
@@ -97,10 +100,28 @@ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
 	setprop_string(fdt, "/chosen", "bootargs", cmdline);
 }
 
+static void hex_str(char *out, uint32_t value)
+{
+	uint32_t digit;
+	int idx;
+
+	for (idx = 7; idx >= 0; idx--) {
+		digit = value >> 28;
+		value <<= 4;
+		digit &= 0xf;
+		if (digit < 10)
+			digit += '0';
+		else
+			digit += 'A'-10;
+		*out++ = digit;
+	}
+	*out = '\0';
+}
+
 /*
  * Convert and fold provided ATAGs into the provided FDT.
  *
- * REturn values:
+ * Return values:
  *    = 0 -> pretend success
  *    = 1 -> bad ATAG (may retry with another possible ATAG pointer)
  *    < 0 -> error from libfdt
@@ -110,7 +131,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 	struct tag *atag = atag_list;
 	/* In the case of 64 bits memory size, need to reserve 2 cells for
 	 * address and size for each bank */
-	uint32_t mem_reg_property[2 * 2 * NR_BANKS];
+	__be32 mem_reg_property[2 * 2 * NR_BANKS];
 	int memcount = 0;
 	int ret, memsize;
 
@@ -119,7 +140,7 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 		return 1;
 
 	/* if we get a DTB here we're done already */
-	if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+	if (*(__be32 *)atag_list == cpu_to_fdt32(FDT_MAGIC))
 	       return 0;
 
 	/* validate the ATAG */
@@ -158,8 +179,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 				/* if memsize is 2, that means that
 				 * each data needs 2 cells of 32 bits,
 				 * so the data are 64 bits */
-				uint64_t *mem_reg_prop64 =
-					(uint64_t *)mem_reg_property;
+				__be64 *mem_reg_prop64 =
+					(__be64 *)mem_reg_property;
 				mem_reg_prop64[memcount++] =
 					cpu_to_fdt64(atag->u.mem.start);
 				mem_reg_prop64[memcount++] =
@@ -179,6 +200,11 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
 					initrd_start);
 			setprop_cell(fdt, "/chosen", "linux,initrd-end",
 					initrd_start + initrd_size);
+		} else if (atag->hdr.tag == ATAG_SERIAL) {
+			char serno[16+2];
+			hex_str(serno, atag->u.serialnr.high);
+			hex_str(serno+8, atag->u.serialnr.low);
+			setprop_string(fdt, "/", "serial-number", serno);
 		}
 	}
 
diff --git a/arch/arm/boot/compressed/big-endian.S b/arch/arm/boot/compressed/big-endian.S
index 25ab26f1c6f0..0e092c36da2f 100644
--- a/arch/arm/boot/compressed/big-endian.S
+++ b/arch/arm/boot/compressed/big-endian.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  *  linux/arch/arm/boot/compressed/big-endian.S
  *
@@ -5,7 +6,7 @@
  *  Author: Nicolas Pitre
  */
 
-	.section ".start", #alloc, #execinstr
+	.section ".start", "ax"
 
 	mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 	orr	r0, r0, #(1 << 7)	@ enable big endian mode
diff --git a/arch/arm/boot/compressed/bswapsdi2.S b/arch/arm/boot/compressed/bswapsdi2.S
new file mode 100644
index 000000000000..b2156b378c7b
--- /dev/null
+++ b/arch/arm/boot/compressed/bswapsdi2.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __bswapsi2, __bswapdi2 */
+#include "../../lib/bswapsdi2.S"
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 5392ee63338f..fac40a717fcf 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
@@ -7,7 +8,10 @@
 
 ENTRY(putc)
 	addruart r1, r2, r3
-	waituart r3, r1
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+	waituartcts r3, r1
+#endif
+	waituarttxrdy r3, r1
 	senduart r0, r1
 	busyuart r3, r1
 	mov	 pc, lr
@@ -23,7 +27,11 @@ ENTRY(putc)
 	strb	r0, [r1]
 	mov	r0, #0x03		@ SYS_WRITEC
    ARM(	svc	#0x123456	)
+#ifdef CONFIG_CPU_V7M
+ THUMB(	bkpt	#0xab		)
+#else
  THUMB(	svc	#0xab		)
+#endif
 	mov	pc, lr
 	.align	2
 1:	.word	_GLOBAL_OFFSET_TABLE_ - .
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index bd245d34952d..0669851394f0 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #define _LINUX_STRING_H_
 
 #include <linux/compiler.h>	/* for inline */
@@ -5,10 +6,7 @@
 #include <linux/stddef.h>	/* for NULL */
 #include <linux/linkage.h>
 #include <asm/string.h>
-
-extern unsigned long free_mem_ptr;
-extern unsigned long free_mem_end_ptr;
-extern void error(char *);
+#include "misc.h"
 
 #define STATIC static
 #define STATIC_RW_DATA	/* non-static please */
@@ -32,6 +30,10 @@ extern void error(char *);
 
 /* Not needed, but used in some headers pulled in by decompressors */
 extern char * strstr(const char * s1, const char *s2);
+extern size_t strlen(const char *s);
+extern int strcmp(const char *cs, const char *ct);
+extern int memcmp(const void *cs, const void *ct, size_t count);
+extern char * strchrnul(const char *, int);
 
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"
@@ -46,7 +48,10 @@ extern char * strstr(const char * s1, const char *s2);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif
@@ -57,5 +62,5 @@ extern char * strstr(const char * s1, const char *s2);
 
 int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x))
 {
-	return decompress(input, len, NULL, NULL, output, NULL, error);
+	return __decompress(input, len, NULL, NULL, output, 0, NULL, error);
 }
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
new file mode 100644
index 000000000000..230030c13085
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -0,0 +1,136 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013-2017 Linaro Ltd
+ * Authors: Roy Franz <roy.franz@linaro.org>
+ *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ */
+
+#include <linux/pe.h>
+#include <linux/sizes.h>
+
+		.macro	__nop
+ AR_CLASS(	mov	r0, r0		)
+  M_CLASS(	nop.w			)
+		.endm
+
+		.macro __initial_nops
+#ifdef CONFIG_EFI_STUB
+		@ This is a two-instruction NOP, which happens to bear the
+		@ PE/COFF signature "MZ" in the first two bytes, so the kernel
+		@ is accepted as an EFI binary. Booting via the UEFI stub
+		@ will not execute those instructions, but the ARM/Linux
+		@ boot protocol does, so we need some NOPs here.
+		.inst	MZ_MAGIC | (0xe225 << 16)	@ eor r5, r5, 0x4d000
+		eor	r5, r5, 0x4d000			@ undo previous insn
+#else
+		__nop
+		__nop
+#endif
+		.endm
+
+		.macro	__EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+		.set	start_offset, __efi_start - start
+		.org	start + 0x3c
+		@
+		@ The PE header can be anywhere in the file, but for
+		@ simplicity we keep it together with the MSDOS header
+		@ The offset to the PE/COFF header needs to be at offset
+		@ 0x3C in the MSDOS header.
+		@ The only 2 fields of the MSDOS header that are used are this
+		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+		@
+		.long	pe_header - start		@ Offset to the PE header.
+
+pe_header:
+		.long	PE_MAGIC
+
+coff_header:
+		.short	IMAGE_FILE_MACHINE_THUMB	@ Machine
+		.short	section_count			@ NumberOfSections
+		.long	0 				@ TimeDateStamp
+		.long	0				@ PointerToSymbolTable
+		.long	0				@ NumberOfSymbols
+		.short	section_table - optional_header	@ SizeOfOptionalHeader
+		.short	IMAGE_FILE_32BIT_MACHINE | \
+			IMAGE_FILE_DEBUG_STRIPPED | \
+			IMAGE_FILE_EXECUTABLE_IMAGE | \
+			IMAGE_FILE_LINE_NUMS_STRIPPED	@ Characteristics
+
+#define __pecoff_code_size (__pecoff_data_start - __efi_start)
+
+optional_header:
+		.short	PE_OPT_MAGIC_PE32		@ PE32 format
+		.byte	0x02				@ MajorLinkerVersion
+		.byte	0x14				@ MinorLinkerVersion
+		.long	__pecoff_code_size		@ SizeOfCode
+		.long	__pecoff_data_size		@ SizeOfInitializedData
+		.long	0				@ SizeOfUninitializedData
+		.long	efi_pe_entry - start		@ AddressOfEntryPoint
+		.long	start_offset			@ BaseOfCode
+		.long	__pecoff_data_start - start	@ BaseOfData
+
+extra_header_fields:
+		.long	0				@ ImageBase
+		.long	SZ_4K				@ SectionAlignment
+		.long	SZ_512				@ FileAlignment
+		.short	0				@ MajorOsVersion
+		.short	0				@ MinorOsVersion
+		.short	LINUX_EFISTUB_MAJOR_VERSION	@ MajorImageVersion
+		.short	LINUX_EFISTUB_MINOR_VERSION	@ MinorImageVersion
+		.short	0				@ MajorSubsystemVersion
+		.short	0				@ MinorSubsystemVersion
+		.long	0				@ Win32VersionValue
+
+		.long	__pecoff_end - start		@ SizeOfImage
+		.long	start_offset			@ SizeOfHeaders
+		.long	0				@ CheckSum
+		.short	IMAGE_SUBSYSTEM_EFI_APPLICATION	@ Subsystem
+		.short	0				@ DllCharacteristics
+		.long	0				@ SizeOfStackReserve
+		.long	0				@ SizeOfStackCommit
+		.long	0				@ SizeOfHeapReserve
+		.long	0				@ SizeOfHeapCommit
+		.long	0				@ LoaderFlags
+		.long	(section_table - .) / 8		@ NumberOfRvaAndSizes
+
+		.quad	0				@ ExportTable
+		.quad	0				@ ImportTable
+		.quad	0				@ ResourceTable
+		.quad	0				@ ExceptionTable
+		.quad	0				@ CertificationTable
+		.quad	0				@ BaseRelocationTable
+
+section_table:
+		.ascii	".text\0\0\0"
+		.long	__pecoff_code_size		@ VirtualSize
+		.long	__efi_start			@ VirtualAddress
+		.long	__pecoff_code_size		@ SizeOfRawData
+		.long	__efi_start			@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_CODE | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_EXECUTE		@ Characteristics
+
+		.ascii	".data\0\0\0"
+		.long	__pecoff_data_size		@ VirtualSize
+		.long	__pecoff_data_start - start	@ VirtualAddress
+		.long	__pecoff_data_rawsize		@ SizeOfRawData
+		.long	__pecoff_data_start - start	@ PointerToRawData
+		.long	0				@ PointerToRelocations
+		.long	0				@ PointerToLineNumbers
+		.short	0				@ NumberOfRelocations
+		.short	0				@ NumberOfLineNumbers
+		.long	IMAGE_SCN_CNT_INITIALIZED_DATA | \
+			IMAGE_SCN_MEM_READ | \
+			IMAGE_SCN_MEM_WRITE		@ Characteristics
+
+		.set	section_count, (. - section_table) / 40
+
+		.align	12
+__efi_start:
+#endif
+		.endm
diff --git a/arch/arm/boot/compressed/fdt.c b/arch/arm/boot/compressed/fdt.c
new file mode 100644
index 000000000000..f8ea7a201ab1
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt.c"
diff --git a/arch/arm/boot/compressed/fdt_check_mem_start.c b/arch/arm/boot/compressed/fdt_check_mem_start.c
new file mode 100644
index 000000000000..9291a2661bdf
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_check_mem_start.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/kernel.h>
+#include <linux/libfdt.h>
+#include <linux/sizes.h>
+
+static const void *get_prop(const void *fdt, const char *node_path,
+			    const char *property, int minlen)
+{
+	const void *prop;
+	int offset, len;
+
+	offset = fdt_path_offset(fdt, node_path);
+	if (offset < 0)
+		return NULL;
+
+	prop = fdt_getprop(fdt, offset, property, &len);
+	if (!prop || len < minlen)
+		return NULL;
+
+	return prop;
+}
+
+static uint32_t get_cells(const void *fdt, const char *name)
+{
+	const fdt32_t *prop = get_prop(fdt, "/", name, sizeof(fdt32_t));
+
+	if (!prop) {
+		/* default */
+		return 1;
+	}
+
+	return fdt32_ld(prop);
+}
+
+static uint64_t get_val(const fdt32_t *cells, uint32_t ncells)
+{
+	uint64_t r;
+
+	r = fdt32_ld(cells);
+	if (ncells > 1)
+		r = (r << 32) | fdt32_ld(cells + 1);
+
+	return r;
+}
+
+/*
+ * Check the start of physical memory
+ *
+ * Traditionally, the start address of physical memory is obtained by masking
+ * the program counter.  However, this does require that this address is a
+ * multiple of 128 MiB, precluding booting Linux on platforms where this
+ * requirement is not fulfilled.
+ * Hence validate the calculated address against the memory information in the
+ * DTB, and, if out-of-range, replace it by the real start address.
+ * To preserve backwards compatibility (systems reserving a block of memory
+ * at the start of physical memory, kdump, ...), the traditional method is
+ * used if it yields a valid address, unless the "linux,usable-memory-range"
+ * property is present.
+ *
+ * Return value: start address of physical memory to use
+ */
+uint32_t fdt_check_mem_start(uint32_t mem_start, const void *fdt)
+{
+	uint32_t addr_cells, size_cells, usable_base, base;
+	uint32_t fdt_mem_start = 0xffffffff;
+	const fdt32_t *usable, *reg, *endp;
+	uint64_t size, usable_end, end;
+	const char *type;
+	int offset, len;
+
+	if (!fdt)
+		return mem_start;
+
+	if (fdt_magic(fdt) != FDT_MAGIC)
+		return mem_start;
+
+	/* There may be multiple cells on LPAE platforms */
+	addr_cells = get_cells(fdt, "#address-cells");
+	size_cells = get_cells(fdt, "#size-cells");
+	if (addr_cells > 2 || size_cells > 2)
+		return mem_start;
+
+	/*
+	 * Usable memory in case of a crash dump kernel
+	 * This property describes a limitation: memory within this range is
+	 * only valid when also described through another mechanism
+	 */
+	usable = get_prop(fdt, "/chosen", "linux,usable-memory-range",
+			  (addr_cells + size_cells) * sizeof(fdt32_t));
+	if (usable) {
+		size = get_val(usable + addr_cells, size_cells);
+		if (!size)
+			return mem_start;
+
+		if (addr_cells > 1 && fdt32_ld(usable)) {
+			/* Outside 32-bit address space */
+			return mem_start;
+		}
+
+		usable_base = fdt32_ld(usable + addr_cells - 1);
+		usable_end = usable_base + size;
+	}
+
+	/* Walk all memory nodes and regions */
+	for (offset = fdt_next_node(fdt, -1, NULL); offset >= 0;
+	     offset = fdt_next_node(fdt, offset, NULL)) {
+		type = fdt_getprop(fdt, offset, "device_type", NULL);
+		if (!type || strcmp(type, "memory"))
+			continue;
+
+		reg = fdt_getprop(fdt, offset, "linux,usable-memory", &len);
+		if (!reg)
+			reg = fdt_getprop(fdt, offset, "reg", &len);
+		if (!reg)
+			continue;
+
+		for (endp = reg + (len / sizeof(fdt32_t));
+		     endp - reg >= addr_cells + size_cells;
+		     reg += addr_cells + size_cells) {
+			size = get_val(reg + addr_cells, size_cells);
+			if (!size)
+				continue;
+
+			if (addr_cells > 1 && fdt32_ld(reg)) {
+				/* Outside 32-bit address space, skipping */
+				continue;
+			}
+
+			base = fdt32_ld(reg + addr_cells - 1);
+			end = base + size;
+			if (usable) {
+				/*
+				 * Clip to usable range, which takes precedence
+				 * over mem_start
+				 */
+				if (base < usable_base)
+					base = usable_base;
+
+				if (end > usable_end)
+					end = usable_end;
+
+				if (end <= base)
+					continue;
+			} else if (mem_start >= base && mem_start < end) {
+				/* Calculated address is valid, use it */
+				return mem_start;
+			}
+
+			if (base < fdt_mem_start)
+				fdt_mem_start = base;
+		}
+	}
+
+	if (fdt_mem_start == 0xffffffff) {
+		/* No usable memory found, falling back to default */
+		return mem_start;
+	}
+
+	/*
+	 * The calculated address is not usable, or was overridden by the
+	 * "linux,usable-memory-range" property.
+	 * Use the lowest usable physical memory address from the DTB instead,
+	 * and make sure this is a multiple of 2 MiB for phys/virt patching.
+	 */
+	return round_up(fdt_mem_start, SZ_2M);
+}
diff --git a/arch/arm/boot/compressed/fdt_ro.c b/arch/arm/boot/compressed/fdt_ro.c
new file mode 100644
index 000000000000..93970a4ad5ae
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_ro.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_ro.c"
diff --git a/arch/arm/boot/compressed/fdt_rw.c b/arch/arm/boot/compressed/fdt_rw.c
new file mode 100644
index 000000000000..f7c6b8b7e01c
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_rw.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_rw.c"
diff --git a/arch/arm/boot/compressed/fdt_wip.c b/arch/arm/boot/compressed/fdt_wip.c
new file mode 100644
index 000000000000..048d2c7a088d
--- /dev/null
+++ b/arch/arm/boot/compressed/fdt_wip.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fdt_wip.c"
diff --git a/arch/arm/boot/compressed/font.c b/arch/arm/boot/compressed/font.c
new file mode 100644
index 000000000000..46a677649db4
--- /dev/null
+++ b/arch/arm/boot/compressed/font.c
@@ -0,0 +1,2 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include "../../../../lib/fonts/font_acorn_8x8.c"
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 3115e313d9f6..23eae1a65064 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /* 
  * linux/arch/arm/boot/compressed/head-sa1100.S
  * 
@@ -19,10 +20,6 @@ __SA1100_start:
 #ifdef CONFIG_SA1100_COLLIE
 		mov	r7, #MACH_TYPE_COLLIE
 #endif
-#ifdef CONFIG_SA1100_SIMPAD
-		@ UNTIL we've something like an open bootldr
-		mov	r7, #MACH_TYPE_SIMPAD	@should be 87
-#endif
 		mrc	p15, 0, r0, c1, c0, 0	@ read control reg
 		ands	r0, r0, #0x0d
 		beq	99f
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S
index eb0084ea1ec4..992e784500fa 100644
--- a/arch/arm/boot/compressed/head-sharpsl.S
+++ b/arch/arm/boot/compressed/head-sharpsl.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * linux/arch/arm/boot/compressed/head-sharpsl.S
  *
diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S
deleted file mode 100644
index 22a75259faa3..000000000000
--- a/arch/arm/boot/compressed/head-shmobile.S
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * The head-file for SH-Mobile ARM platforms
- *
- * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
- * Simon Horman <horms@verge.net.au>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifdef CONFIG_ZBOOT_ROM
-
-	.section	".start", "ax"
-
-	/* load board-specific initialization code */
-#include <mach/zboot.h>
-
-	adr	r0, dtb_info
-	ldmia	r0, {r1, r3, r4, r5, r7}
-
-	sub	r0, r0, r1		@ calculate the delta offset
-	add	r5, r5, r0		@ _edata
-
-	ldr	lr, [r5, #0]		@ check if valid DTB is present
-	cmp	lr, r3
-	bne	0f
-
-	add	r9, r7, #31		@ rounded up to a multiple
-	bic	r9, r9, #31		@ ... of 32 bytes
-
-	add	r6, r9, r5		@ copy from _edata
-	add	r9, r9, r4		@ to MEMORY_START
-
-1:	ldmdb	r6!, {r0 - r3, r10 - r12, lr}
-	cmp	r6, r5
-	stmdb	r9!, {r0 - r3, r10 - r12, lr}
-	bhi	1b
-
-	/* Success: Zero board ID, pointer to start of memory for atag/dtb */
-	mov	r7, #0
-	mov	r8, r4
-	b	2f
-
-	.align	2
-dtb_info:
-	.word	dtb_info
-#ifndef __ARMEB__
-	.word	0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-	.word	0xd00dfeed
-#endif
-	.word	MEMORY_START
-	.word	_edata
-	.word	0x4000			@ maximum DTB size
-0:
-	/* Failure: Zero board ID, NULL atag/dtb */
-	mov 	r7, #0
-	mov	r8, #0			@ pass null pointer as atag
-2 :
-
-#endif /* CONFIG_ZBOOT_ROM */
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 6ab0599c02dd..20fa44d59f82 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * linux/arch/arm/boot/compressed/head-xscale.S
  *
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 06e983f59980..9f406e9c0ea6 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -1,17 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/boot/compressed/head.S
  *
  *  Copyright (C) 1996-2002 Russell King
  *  Copyright (C) 2004 Hyok S. Choi (MPU support)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/v7m.h>
 
+#include "efi-header.S"
+
+#ifdef __ARMEB__
+#define OF_DT_MAGIC 0xd00dfeed
+#else
+#define OF_DT_MAGIC 0xedfe0dd0
+#endif
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -27,21 +32,21 @@
 #if defined(CONFIG_DEBUG_ICEDCC)
 
 #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
 #elif defined(CONFIG_CPU_XSCALE)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c8, c0, 0
 		.endm
 #else
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		.endm
-		.macro	writeb, ch, rb
+		.macro	writeb, ch, rb, tmp
 		mcr	p14, 0, \ch, c1, c0, 0
 		.endm
 #endif
@@ -50,22 +55,23 @@
 
 #include CONFIG_DEBUG_LL_INCLUDE
 
-		.macro	writeb,	ch, rb
+		.macro	writeb,	ch, rb, tmp
+#ifdef CONFIG_DEBUG_UART_FLOW_CONTROL
+		waituartcts \tmp, \rb
+#endif
+		waituarttxrdy \tmp, \rb
 		senduart \ch, \rb
+		busyuart \tmp, \rb
 		.endm
 
 #if defined(CONFIG_ARCH_SA1100)
-		.macro	loadsp, rb, tmp
+		.macro	loadsp, rb, tmp1, tmp2
 		mov	\rb, #0x80000000	@ physical base address
-#ifdef CONFIG_DEBUG_LL_SER3
-		add	\rb, \rb, #0x00050000	@ Ser3
-#else
 		add	\rb, \rb, #0x00010000	@ Ser1
-#endif
 		.endm
 #else
-		.macro	loadsp,	rb, tmp
-		addruart \rb, \tmp
+		.macro	loadsp,	rb, tmp1, tmp2
+		addruart \rb, \tmp1, \tmp2
 		.endm
 #endif
 #endif
@@ -82,37 +88,93 @@
 		bl	phex
 		.endm
 
-		.macro	debug_reloc_start
+		/*
+		 * Debug kernel copy by printing the memory addresses involved
+		 */
+		.macro dbgkc, begin, end, cbegin, cend
 #ifdef DEBUG
-		kputc	#'\n'
-		kphex	r6, 8		/* processor id */
-		kputc	#':'
-		kphex	r7, 8		/* architecture id */
-#ifdef CONFIG_CPU_CP15
-		kputc	#':'
-		mrc	p15, 0, r0, c1, c0
-		kphex	r0, 8		/* control reg */
-#endif
-		kputc	#'\n'
-		kphex	r5, 8		/* decompressed kernel start */
+		kputc   #'C'
+		kputc   #':'
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \begin, 8	/* Start of compressed kernel */
+		kputc	#'-'
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\end, 8		/* End of compressed kernel */
 		kputc	#'-'
-		kphex	r9, 8		/* decompressed kernel end  */
 		kputc	#'>'
-		kphex	r4, 8		/* kernel execution address */
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \cbegin, 8	/* Start of kernel copy */
+		kputc	#'-'
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\cend, 8	/* End of kernel copy */
 		kputc	#'\n'
 #endif
 		.endm
 
-		.macro	debug_reloc_end
+		/*
+		 * Debug print of the final appended DTB location
+		 */
+		.macro dbgadtb, begin, size
 #ifdef DEBUG
-		kphex	r5, 8		/* end of kernel */
+		kputc   #'D'
+		kputc   #'T'
+		kputc   #'B'
+		kputc   #':'
+		kputc   #'0'
+		kputc   #'x'
+		kphex   \begin, 8	/* Start of appended DTB */
+		kputc	#' '
+		kputc	#'('
+		kputc	#'0'
+		kputc	#'x'
+		kphex	\size, 8	/* Size of appended DTB */
+		kputc	#')'
 		kputc	#'\n'
-		mov	r0, r4
-		bl	memdump		/* dump 256 bytes at start of kernel */
 #endif
 		.endm
 
-		.section ".start", #alloc, #execinstr
+		.macro	enable_cp15_barriers, reg
+		mrc	p15, 0, \reg, c1, c0, 0	@ read SCTLR
+		tst	\reg, #(1 << 5)		@ CP15BEN bit set?
+		bne	.L_\@
+		orr	\reg, \reg, #(1 << 5)	@ CP15 barrier instructions
+		mcr	p15, 0, \reg, c1, c0, 0	@ write SCTLR
+ ARM(		.inst   0xf57ff06f		@ v7+ isb	)
+ THUMB(		isb						)
+.L_\@:
+		.endm
+
+		/*
+		 * The kernel build system appends the size of the
+		 * decompressed kernel at the end of the compressed data
+		 * in little-endian form.
+		 */
+		.macro	get_inflated_image_size, res:req, tmp1:req, tmp2:req
+		adr	\res, .Linflated_image_size_offset
+		ldr	\tmp1, [\res]
+		add	\tmp1, \tmp1, \res	@ address of inflated image size
+
+		ldrb	\res, [\tmp1]		@ get_unaligned_le32
+		ldrb	\tmp2, [\tmp1, #1]
+		orr	\res, \res, \tmp2, lsl #8
+		ldrb	\tmp2, [\tmp1, #2]
+		ldrb	\tmp1, [\tmp1, #3]
+		orr	\res, \res, \tmp2, lsl #16
+		orr	\res, \res, \tmp1, lsl #24
+		.endm
+
+		.macro	be32tocpu, val, tmp
+#ifndef __ARMEB__
+		/* convert to little endian */
+		rev_l	\val, \tmp
+#endif
+		.endm
+
+		.section ".start", "ax"
 /*
  * sort out different calling conventions
  */
@@ -125,20 +187,39 @@
  AR_CLASS(	.arm	)
 start:
 		.type	start,#function
-		.rept	7
-		mov	r0, r0
+		/*
+		 * These 7 nops along with the 1 nop immediately below for
+		 * !THUMB2 form 8 nops that make the compressed kernel bootable
+		 * on legacy ARM systems that were assuming the kernel in a.out
+		 * binary format. The boot loaders on these systems would
+		 * jump 32 bytes into the image to skip the a.out header.
+		 * with these 8 nops filling exactly 32 bytes, things still
+		 * work as expected on these legacy systems. Thumb2 mode keeps
+		 * 7 of the nops as it turns out that some boot loaders
+		 * were patching the initial instructions of the kernel, i.e
+		 * had started to exploit this "patch area".
+		 */
+		__initial_nops
+		.rept	5
+		__nop
 		.endr
-   ARM(		mov	r0, r0		)
-   ARM(		b	1f		)
- THUMB(		badr	r12, 1f		)
- THUMB(		bx	r12		)
+#ifndef CONFIG_THUMB2_KERNEL
+		__nop
+#else
+ AR_CLASS(	sub	pc, pc, #3	)	@ A/R: switch to Thumb2 mode
+  M_CLASS(	nop.w			)	@ M: already in Thumb2 mode
+		.thumb
+#endif
+		W(b)	1f
 
 		.word	_magic_sig	@ Magic numbers to help the loader
 		.word	_magic_start	@ absolute load/run zImage address
 		.word	_magic_end	@ zImage end address
 		.word	0x04030201	@ endianness flag
+		.word	0x45454545	@ another magic number to indicate
+		.word	_magic_table	@ additional data table
 
- THUMB(		.thumb			)
+		__EFI_HEADER
 1:
  ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
  AR_CLASS(	mrs	r9, cpsr	)
@@ -195,10 +276,40 @@ not_angel:
 		 * are already placing their zImage in (eg) the top 64MB
 		 * of this range.
 		 */
-		mov	r4, pc
-		and	r4, r4, #0xf8000000
+		mov	r0, pc
+		and	r0, r0, #0xf8000000
+#ifdef CONFIG_USE_OF
+		adr	r1, LC1
+#ifdef CONFIG_ARM_APPENDED_DTB
+		/*
+		 * Look for an appended DTB.  If found, we cannot use it to
+		 * validate the calculated start of physical memory, as its
+		 * memory nodes may need to be augmented by ATAGS stored at
+		 * an offset from the same start of physical memory.
+		 */
+		ldr	r2, [r1, #4]	@ get &_edata
+		add	r2, r2, r1	@ relocate it
+		ldr	r2, [r2]	@ get DTB signature
+		ldr	r3, =OF_DT_MAGIC
+		cmp	r2, r3		@ do we have a DTB there?
+		beq	1f		@ if yes, skip validation
+#endif /* CONFIG_ARM_APPENDED_DTB */
+
+		/*
+		 * Make sure we have some stack before calling C code.
+		 * No GOT fixup has occurred yet, but none of the code we're
+		 * about to call uses any global variables.
+		 */
+		ldr	sp, [r1]	@ get stack location
+		add	sp, sp, r1	@ apply relocation
+
+		/* Validate calculated start against passed DTB */
+		mov	r1, r8
+		bl	fdt_check_mem_start
+1:
+#endif /* CONFIG_USE_OF */
 		/* Determine final kernel image address. */
-		add	r4, r4, #TEXT_OFFSET
+		add	r4, r0, #TEXT_OFFSET
 #else
 		ldr	r4, =zreladdr
 #endif
@@ -211,41 +322,23 @@ not_angel:
 		 */
 		mov	r0, pc
 		cmp	r0, r4
-		ldrcc	r0, LC0+32
+		ldrcc	r0, .Lheadroom
 		addcc	r0, r0, pc
 		cmpcc	r4, r0
 		orrcc	r4, r4, #1		@ remember we skipped cache_on
 		blcs	cache_on
 
-restart:	adr	r0, LC0
-		ldmia	r0, {r1, r2, r3, r6, r10, r11, r12}
-		ldr	sp, [r0, #28]
-
-		/*
-		 * We might be running at a different address.  We need
-		 * to fix up various pointers.
-		 */
-		sub	r0, r0, r1		@ calculate the delta offset
-		add	r6, r6, r0		@ _edata
-		add	r10, r10, r0		@ inflated kernel size location
+restart:	adr	r0, LC1
+		ldr	sp, [r0]
+		ldr	r6, [r0, #4]
+		add	sp, sp, r0
+		add	r6, r6, r0
 
-		/*
-		 * The kernel build system appends the size of the
-		 * decompressed kernel at the end of the compressed data
-		 * in little-endian form.
-		 */
-		ldrb	r9, [r10, #0]
-		ldrb	lr, [r10, #1]
-		orr	r9, r9, lr, lsl #8
-		ldrb	lr, [r10, #2]
-		ldrb	r10, [r10, #3]
-		orr	r9, r9, lr, lsl #16
-		orr	r9, r9, r10, lsl #24
+		get_inflated_image_size	r9, r10, lr
 
 #ifndef CONFIG_ZBOOT_ROM
 		/* malloc space is above the relocated stack (64k max) */
-		add	sp, sp, r0
-		add	r10, sp, #0x10000
+		add	r10, sp, #MALLOC_SIZE
 #else
 		/*
 		 * With ZBOOT_ROM the bss/stack is non relocatable,
@@ -258,9 +351,6 @@ restart:	adr	r0, LC0
 		mov	r5, #0			@ init dtb size to 0
 #ifdef CONFIG_ARM_APPENDED_DTB
 /*
- *   r0  = delta
- *   r2  = BSS start
- *   r3  = BSS end
  *   r4  = final kernel address (possibly with LSB set)
  *   r5  = appended dtb size (still unknown)
  *   r6  = _edata
@@ -268,8 +358,6 @@ restart:	adr	r0, LC0
  *   r8  = atags/device tree pointer
  *   r9  = size of decompressed image
  *   r10 = end of this image, including  bss/stack/malloc space if non XIP
- *   r11 = GOT start
- *   r12 = GOT end
  *   sp  = stack pointer
  *
  * if there are device trees (dtb) appended to zImage, advance r10 so that the
@@ -277,11 +365,7 @@ restart:	adr	r0, LC0
  */
 
 		ldr	lr, [r6, #0]
-#ifndef __ARMEB__
-		ldr	r1, =0xedfe0dd0		@ sig is 0xd00dfeed big endian
-#else
-		ldr	r1, =0xd00dfeed
-#endif
+		ldr	r1, =OF_DT_MAGIC
 		cmp	lr, r1
 		bne	dtb_check_done		@ not found
 
@@ -297,13 +381,8 @@ restart:	adr	r0, LC0
 
 		/* Get the initial DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
+		dbgadtb	r6, r5
 		/* 50% DTB growth should be good enough */
 		add	r5, r5, r5, lsr #1
 		/* preserve 64-bit alignment */
@@ -317,7 +396,6 @@ restart:	adr	r0, LC0
 		/* temporarily relocate the stack past the DTB work space */
 		add	sp, sp, r5
 
-		stmfd	sp!, {r0-r3, ip, lr}
 		mov	r0, r8
 		mov	r1, r6
 		mov	r2, r5
@@ -336,7 +414,6 @@ restart:	adr	r0, LC0
 		mov	r2, r5
 		bleq	atags_to_fdt
 
-		ldmfd	sp!, {r0-r3, ip, lr}
 		sub	sp, sp, r5
 #endif
 
@@ -356,13 +433,7 @@ restart:	adr	r0, LC0
 
 		/* Get the current DTB size */
 		ldr	r5, [r6, #4]
-#ifndef __ARMEB__
-		/* convert r5 (dtb size) to little endian */
-		eor	r1, r5, r5, ror #16
-		bic	r1, r1, #0x00ff0000
-		mov	r5, r5, ror #8
-		eor	r5, r5, r1, lsr #8
-#endif
+		be32tocpu r5, r1
 
 		/* preserve 64-bit alignment */
 		add	r5, r5, #7
@@ -419,7 +490,12 @@ dtb_check_done:
 		cmp	r0, #HYP_MODE
 		bne	1f
 
-		bl	__hyp_get_vectors
+		/*
+		 * Compute the address of the hyp vectors after relocation.
+		 * Call __hyp_set_vectors with the new address so that we
+		 * can HVC again after the copy.
+		 */
+		adr_l	r0, __hyp_stub_vectors
 		sub	r0, r0, r5
 		add	r0, r0, r10
 		bl	__hyp_set_vectors
@@ -432,6 +508,20 @@ dtb_check_done:
 		add	r6, r9, r5
 		add	r9, r9, r10
 
+#ifdef DEBUG
+		sub     r10, r6, r5
+		sub     r10, r9, r10
+		/*
+		 * We are about to copy the kernel to a new memory area.
+		 * The boundaries of the new memory area can be found in
+		 * r10 and r9, whilst r5 and r6 contain the boundaries
+		 * of the memory we are going to copy.
+		 * Calling dbgkc will help with the printing of this
+		 * information.
+		 */
+		dbgkc	r5, r6, r10, r9
+#endif
+
 1:		ldmdb	r6!, {r0 - r3, r10 - r12, lr}
 		cmp	r6, r5
 		stmdb	r9!, {r0 - r3, r10 - r12, lr}
@@ -440,11 +530,8 @@ dtb_check_done:
 		/* Preserve offset to relocated code. */
 		sub	r6, r9, r6
 
-#ifndef CONFIG_ZBOOT_ROM
-		/* cache_clean_flush may use the stack, so relocate it */
-		add	sp, sp, r6
-#endif
-
+		mov	r0, r9			@ start of relocated zImage
+		add	r1, sp, r6		@ end of relocated zImage
 		bl	cache_clean_flush
 
 		badr	r0, restart
@@ -452,6 +539,10 @@ dtb_check_done:
 		mov	pc, r0
 
 wont_overwrite:
+		adr	r0, LC0
+		ldmia	r0, {r1, r2, r3, r11, r12}
+		sub	r0, r0, r1		@ calculate the delta offset
+
 /*
  * If delta is zero, we are running at the address we were linked at.
  *   r0  = delta
@@ -538,13 +629,16 @@ not_relocated:	mov	r0, #0
  */
 		mov	r0, r4
 		mov	r1, sp			@ malloc space above stack
-		add	r2, sp, #0x10000	@ 64k max
+		add	r2, sp, #MALLOC_SIZE	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
+
+		get_inflated_image_size	r1, r2, r3
+
+		mov	r0, r4			@ start of inflated image
+		add	r1, r1, r0		@ end of inflated image
 		bl	cache_clean_flush
 		bl	cache_off
-		mov	r1, r7			@ restore architecture number
-		mov	r2, r8			@ restore atags pointer
 
 #ifdef CONFIG_ARM_VIRT_EXT
 		mrs	r0, spsr		@ Get saved CPU boot mode
@@ -552,17 +646,11 @@ not_relocated:	mov	r0, #0
 		cmp	r0, #HYP_MODE		@ if not booted in HYP mode...
 		bne	__enter_kernel		@ boot kernel directly
 
-		adr	r12, .L__hyp_reentry_vectors_offset
-		ldr	r0, [r12]
-		add	r0, r0, r12
-
+		adr_l	r0, __hyp_reentry_vectors
 		bl	__hyp_set_vectors
 		__HVC(0)			@ otherwise bounce to hyp mode
 
 		b	.			@ should never be reached
-
-		.align	2
-.L__hyp_reentry_vectors_offset:	.long	__hyp_reentry_vectors - .
 #else
 		b	__enter_kernel
 #endif
@@ -572,14 +660,21 @@ not_relocated:	mov	r0, #0
 LC0:		.word	LC0			@ r1
 		.word	__bss_start		@ r2
 		.word	_end			@ r3
-		.word	_edata			@ r6
-		.word	input_data_end - 4	@ r10 (inflated size location)
 		.word	_got_start		@ r11
 		.word	_got_end		@ ip
-		.word	.L_user_stack_end	@ sp
-		.word	_end - restart + 16384 + 1024*1024
 		.size	LC0, . - LC0
 
+		.type	LC1, #object
+LC1:		.word	.L_user_stack_end - LC1	@ sp
+		.word	_edata - LC1		@ r6
+		.size	LC1, . - LC1
+
+.Lheadroom:
+		.word	_end - restart + 16384 + 1024*1024
+
+.Linflated_image_size_offset:
+		.long	(input_data_end - 4) - .
+
 #ifdef CONFIG_ARCH_RPC
 		.globl	params
 params:		ldr	r0, =0x10000100		@ params_phys for RPC
@@ -589,6 +684,24 @@ params:		ldr	r0, =0x10000100		@ params_phys for RPC
 #endif
 
 /*
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
+ */
+		.macro	dcache_line_size, reg, tmp
+#ifdef CONFIG_CPU_V7M
+		movw	\tmp, #:lower16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		movt	\tmp, #:upper16:BASEADDR_V7M_SCB + V7M_SCB_CTR
+		ldr	\tmp, [\tmp]
+#else
+		mrc	p15, 0, \tmp, c0, c0, 1		@ read ctr
+#endif
+		lsr	\tmp, \tmp, #16
+		and	\tmp, \tmp, #0xf		@ cache line size encoding
+		mov	\reg, #4			@ bytes per word
+		mov	\reg, \reg, lsl \tmp		@ actual cache line size
+		.endm
+
+/*
  * Turn on the cache.  We need to setup some page tables so that we
  * can have both the I and D caches on.
  *
@@ -752,6 +865,7 @@ __armv4_mmu_cache_on:
 		mov	pc, r12
 
 __armv7_mmu_cache_on:
+		enable_cp15_barriers	r11
 		mov	r12, lr
 #ifdef CONFIG_MMU
 		mrc	p15, 0, r11, c0, c1, 4	@ read ID_MMFR0
@@ -776,7 +890,7 @@ __armv7_mmu_cache_on:
 		orrne	r0, r0, #1		@ MMU enabled
 		movne	r1, #0xfffffffd		@ domain 0 = client
 		bic     r6, r6, #1 << 31        @ 32-bit translation system
-		bic     r6, r6, #3 << 0         @ use only ttbr0
+		bic     r6, r6, #(7 << 0) | (1 << 4)	@ use only ttbr0
 		mcrne	p15, 0, r3, c2, c0, 0	@ load page table pointer
 		mcrne	p15, 0, r1, c3, c0, 0	@ load domain access control
 		mcrne   p15, 0, r6, c2, c0, 2   @ load ttb control
@@ -1074,13 +1188,11 @@ __armv4_mmu_cache_off:
 __armv7_mmu_cache_off:
 		mrc	p15, 0, r0, c1, c0
 #ifdef CONFIG_MMU
-		bic	r0, r0, #0x000d
+		bic	r0, r0, #0x0005
 #else
-		bic	r0, r0, #0x000c
+		bic	r0, r0, #0x0004
 #endif
 		mcr	p15, 0, r0, c1, c0	@ turn MMU and cache off
-		mov	r12, lr
-		bl	__armv7_mmu_cache_flush
 		mov	r0, #0
 #ifdef CONFIG_MMU
 		mcr	p15, 0, r0, c8, c7, 0	@ invalidate whole TLB
@@ -1088,11 +1200,14 @@ __armv7_mmu_cache_off:
 		mcr	p15, 0, r0, c7, c5, 6	@ invalidate BTC
 		mcr	p15, 0, r0, c7, c10, 4	@ DSB
 		mcr	p15, 0, r0, c7, c5, 4	@ ISB
-		mov	pc, r12
+		mov	pc, lr
 
 /*
  * Clean and flush the cache to maintain consistency.
  *
+ * On entry,
+ *  r0 = start address
+ *  r1 = end address (exclusive)
  * On exit,
  *  r1, r2, r3, r9, r10, r11, r12 corrupted
  * This routine must preserve:
@@ -1101,6 +1216,7 @@ __armv7_mmu_cache_off:
 		.align	5
 cache_clean_flush:
 		mov	r3, #16
+		mov	r11, r1
 		b	call_cache_fn
 
 __armv4_mpu_cache_flush:
@@ -1141,6 +1257,7 @@ __armv6_mmu_cache_flush:
 		mov	pc, lr
 
 __armv7_mmu_cache_flush:
+		enable_cp15_barriers	r10
 		tst	r4, #1
 		bne	iflush
 		mrc	p15, 0, r10, c0, c1, 5	@ read ID_MMFR1
@@ -1150,51 +1267,16 @@ __armv7_mmu_cache_flush:
 		mcr	p15, 0, r10, c7, c14, 0	@ clean+invalidate D
 		b	iflush
 hierarchical:
-		mcr	p15, 0, r10, c7, c10, 5	@ DMB
-		stmfd	sp!, {r0-r7, r9-r11}
-		mrc	p15, 1, r0, c0, c0, 1	@ read clidr
-		ands	r3, r0, #0x7000000	@ extract loc from clidr
-		mov	r3, r3, lsr #23		@ left align loc bit field
-		beq	finished		@ if loc is 0, then no need to clean
-		mov	r10, #0			@ start clean at cache level 0
-loop1:
-		add	r2, r10, r10, lsr #1	@ work out 3x current cache level
-		mov	r1, r0, lsr r2		@ extract cache type bits from clidr
-		and	r1, r1, #7		@ mask of the bits for current cache only
-		cmp	r1, #2			@ see what cache we have at this level
-		blt	skip			@ skip if no cache, or just i-cache
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
-		mcr	p15, 0, r10, c7, c5, 4	@ isb to sych the new cssr&csidr
-		mrc	p15, 1, r1, c0, c0, 0	@ read the new csidr
-		and	r2, r1, #7		@ extract the length of the cache lines
-		add	r2, r2, #4		@ add 4 (line length offset)
-		ldr	r4, =0x3ff
-		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		clz	r5, r4			@ find bit position of way size increment
-		ldr	r7, =0x7fff
-		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
-loop2:
-		mov	r9, r4			@ create working copy of max way size
-loop3:
- ARM(		orr	r11, r10, r9, lsl r5	) @ factor way and cache number into r11
- ARM(		orr	r11, r11, r7, lsl r2	) @ factor index number into r11
- THUMB(		lsl	r6, r9, r5		)
- THUMB(		orr	r11, r10, r6		) @ factor way and cache number into r11
- THUMB(		lsl	r6, r7, r2		)
- THUMB(		orr	r11, r11, r6		) @ factor index number into r11
-		mcr	p15, 0, r11, c7, c14, 2	@ clean & invalidate by set/way
-		subs	r9, r9, #1		@ decrement the way
-		bge	loop3
-		subs	r7, r7, #1		@ decrement the index
-		bge	loop2
-skip:
-		add	r10, r10, #2		@ increment cache number
-		cmp	r3, r10
-		bgt	loop1
-finished:
-		ldmfd	sp!, {r0-r7, r9-r11}
-		mov	r10, #0			@ swith back to cache level 0
-		mcr	p15, 2, r10, c0, c0, 0	@ select current cache level in cssr
+		dcache_line_size r1, r2		@ r1 := dcache min line size
+		sub	r2, r1, #1		@ r2 := line size mask
+		bic	r0, r0, r2		@ round down start to line size
+		sub	r11, r11, #1		@ end address is exclusive
+		bic	r11, r11, r2		@ round down end to line size
+0:		cmp	r0, r11			@ finished?
+		bgt	iflush
+		mcr	p15, 0, r0, c7, c14, 1	@ Dcache clean/invalidate by VA
+		add	r0, r0, r1
+		b	0b
 iflush:
 		mcr	p15, 0, r10, c7, c10, 4	@ DSB
 		mcr	p15, 0, r10, c7, c5, 0	@ invalidate I+BTB
@@ -1205,7 +1287,7 @@ iflush:
 __armv5tej_mmu_cache_flush:
 		tst	r4, #1
 		movne	pc, lr
-1:		mrc	p15, 0, r15, c7, c14, 3	@ test,clean,invalidate D cache
+1:		mrc	p15, 0, APSR_nzcv, c7, c14, 3	@ test,clean,invalidate D cache
 		bne	1b
 		mcr	p15, 0, r0, c7, c5, 0	@ flush I cache
 		mcr	p15, 0, r0, c7, c10, 4	@ drain WB
@@ -1279,11 +1361,11 @@ phex:		adr	r3, phexbuf
 		b	1b
 
 @ puts corrupts {r0, r1, r2, r3}
-puts:		loadsp	r3, r1
+puts:		loadsp	r3, r2, r1
 1:		ldrb	r2, [r0], #1
 		teq	r2, #0
 		moveq	pc, lr
-2:		writeb	r2, r3
+2:		writeb	r2, r3, r1
 		mov	r1, #0x00020000
 3:		subs	r1, r1, #1
 		bne	3b
@@ -1296,8 +1378,8 @@ puts:		loadsp	r3, r1
 @ putc corrupts {r0, r1, r2, r3}
 putc:
 		mov	r2, r0
+		loadsp	r3, r1, r0
 		mov	r0, #0
-		loadsp	r3, r1
 		b	2b
 
 @ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
@@ -1337,7 +1419,11 @@ memdump:	mov	r12, r0
 __hyp_reentry_vectors:
 		W(b)	.			@ reset
 		W(b)	.			@ undef
+#ifdef CONFIG_EFI_STUB
+		W(b)	__enter_kernel_from_hyp	@ hvc from HYP
+#else
 		W(b)	.			@ svc
+#endif
 		W(b)	.			@ pabort
 		W(b)	.			@ dabort
 		W(b)	__enter_kernel		@ hyp
@@ -1347,12 +1433,98 @@ __hyp_reentry_vectors:
 
 __enter_kernel:
 		mov	r0, #0			@ must be 0
+		mov	r1, r7			@ restore architecture number
+		mov	r2, r8			@ restore atags pointer
  ARM(		mov	pc, r4		)	@ call kernel
  M_CLASS(	add	r4, r4, #1	)	@ enter in Thumb mode for M class
  THUMB(		bx	r4		)	@ entry point is always ARM for A/R classes
 
 reloc_code_end:
 
+#ifdef CONFIG_EFI_STUB
+__enter_kernel_from_hyp:
+		mrc	p15, 4, r0, c1, c0, 0	@ read HSCTLR
+		bic	r0, r0, #0x5		@ disable MMU and caches
+		mcr	p15, 4, r0, c1, c0, 0	@ write HSCTLR
+		isb
+		b	__enter_kernel
+
+ENTRY(efi_enter_kernel)
+		mov	r4, r0			@ preserve image base
+		mov	r8, r1			@ preserve DT pointer
+
+		adr_l	r0, call_cache_fn
+		adr	r1, 0f			@ clean the region of code we
+		bl	cache_clean_flush	@ may run with the MMU off
+
+#ifdef CONFIG_ARM_VIRT_EXT
+		@
+		@ The EFI spec does not support booting on ARM in HYP mode,
+		@ since it mandates that the MMU and caches are on, with all
+		@ 32-bit addressable DRAM mapped 1:1 using short descriptors.
+		@
+		@ While the EDK2 reference implementation adheres to this,
+		@ U-Boot might decide to enter the EFI stub in HYP mode
+		@ anyway, with the MMU and caches either on or off.
+		@
+		mrs	r0, cpsr		@ get the current mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		and	r0, r0, #MODE_MASK	@ are we running in HYP mode?
+		cmp	r0, #HYP_MODE
+		bne	.Lefi_svc
+
+		mrc	p15, 4, r1, c1, c0, 0	@ read HSCTLR
+		tst	r1, #0x1		@ MMU enabled at HYP?
+		beq	1f
+
+		@
+		@ When running in HYP mode with the caches on, we're better
+		@ off just carrying on using the cached 1:1 mapping that the
+		@ firmware provided. Set up the HYP vectors so HVC instructions
+		@ issued from HYP mode take us to the correct handler code. We
+		@ will disable the MMU before jumping to the kernel proper.
+		@
+ ARM(		bic	r1, r1, #(1 << 30)	) @ clear HSCTLR.TE
+ THUMB(		orr	r1, r1, #(1 << 30)	) @ set HSCTLR.TE
+		mcr	p15, 4, r1, c1, c0, 0
+		adr	r0, __hyp_reentry_vectors
+		mcr	p15, 4, r0, c12, c0, 0	@ set HYP vector base (HVBAR)
+		isb
+		b	.Lefi_hyp
+
+		@
+		@ When running in HYP mode with the caches off, we need to drop
+		@ into SVC mode now, and let the decompressor set up its cached
+		@ 1:1 mapping as usual.
+		@
+1:		mov	r9, r4			@ preserve image base
+		bl	__hyp_stub_install	@ install HYP stub vectors
+		safe_svcmode_maskall	r1	@ drop to SVC mode
+		msr	spsr_cxsf, r0		@ record boot mode
+		orr	r4, r9, #1		@ restore image base and set LSB
+		b	.Lefi_hyp
+.Lefi_svc:
+#endif
+		mrc	p15, 0, r0, c1, c0, 0	@ read SCTLR
+		tst	r0, #0x1		@ MMU enabled?
+		orreq	r4, r4, #1		@ set LSB if not
+
+.Lefi_hyp:
+		mov	r0, r8			@ DT start
+		add	r1, r8, r2		@ DT end
+		bl	cache_clean_flush
+
+		adr	r0, 0f			@ switch to our stack
+		ldr	sp, [r0]
+		add	sp, sp, r0
+
+		mov	r5, #0			@ appended DTB size
+		mov	r7, #0xFFFFFFFF		@ machine ID
+		b	wont_overwrite
+ENDPROC(efi_enter_kernel)
+0:		.long	.L_user_stack_end - .
+#endif
+
 		.align
 		.section ".stack", "aw", %nobits
 .L_user_stack:	.space	4096
diff --git a/arch/arm/boot/compressed/hyp-stub.S b/arch/arm/boot/compressed/hyp-stub.S
new file mode 100644
index 000000000000..a703eaa86f10
--- /dev/null
+++ b/arch/arm/boot/compressed/hyp-stub.S
@@ -0,0 +1,2 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include "../../kernel/hyp-stub.S"
diff --git a/arch/arm/boot/compressed/lib1funcs.S b/arch/arm/boot/compressed/lib1funcs.S
new file mode 100644
index 000000000000..815dec73ba4d
--- /dev/null
+++ b/arch/arm/boot/compressed/lib1funcs.S
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* For __aeabi_uidivmod */
+#include "../../lib/lib1funcs.S"
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
deleted file mode 100644
index 17ae0f3efac8..000000000000
--- a/arch/arm/boot/compressed/libfdt_env.h
+++ /dev/null
@@ -1,19 +0,0 @@
-#ifndef _ARM_LIBFDT_ENV_H
-#define _ARM_LIBFDT_ENV_H
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <asm/byteorder.h>
-
-typedef __be16 fdt16_t;
-typedef __be32 fdt32_t;
-typedef __be64 fdt64_t;
-
-#define fdt16_to_cpu(x)		be16_to_cpu(x)
-#define cpu_to_fdt16(x)		cpu_to_be16(x)
-#define fdt32_to_cpu(x)		be32_to_cpu(x)
-#define cpu_to_fdt32(x)		cpu_to_be32(x)
-#define fdt64_to_cpu(x)		be64_to_cpu(x)
-#define cpu_to_fdt64(x)		cpu_to_be64(x)
-
-#endif
diff --git a/arch/arm/boot/compressed/ll_char_wr.S b/arch/arm/boot/compressed/ll_char_wr.S
index 8517c8606b4a..1ec8cb2898b1 100644
--- a/arch/arm/boot/compressed/ll_char_wr.S
+++ b/arch/arm/boot/compressed/ll_char_wr.S
@@ -1,12 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  linux/arch/arm/lib/ll_char_wr.S
  *
  *  Copyright (C) 1995, 1996 Russell King.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  *  Speedups & 1bpp code (C) 1996 Philip Blundell & Russell King.
  *
  *  10-04-96	RMK	Various cleanups & reduced register usage.
@@ -75,7 +72,7 @@ Lrow4bpplp:
 	tst	r1, #7				@ avoid using r7 directly after
 	str	r7, [r0, -r5]!
 	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
+	ldrbne	r7, [r6, r1]
 	bne	Lrow4bpplp
 	ldmfd	sp!, {r4 - r7, pc}
 
@@ -103,7 +100,7 @@ Lrow8bpplp:
 	sub	r0, r0, r5			@ avoid ip
 	stmia	r0, {r4, ip}
 	subne	r1, r1, #1
-	ldrneb	r7, [r6, r1]
+	ldrbne	r7, [r6, r1]
 	bne	Lrow8bpplp
 	ldmfd	sp!, {r4 - r7, pc}
 
diff --git a/arch/arm/boot/compressed/misc-ep93xx.h b/arch/arm/boot/compressed/misc-ep93xx.h
new file mode 100644
index 000000000000..65b4121d1490
--- /dev/null
+++ b/arch/arm/boot/compressed/misc-ep93xx.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ */
+
+#include <asm/mach-types.h>
+
+static inline unsigned int __raw_readl(unsigned int ptr)
+{
+	return *((volatile unsigned int *)ptr);
+}
+
+static inline void __raw_writeb(unsigned char value, unsigned int ptr)
+{
+	*((volatile unsigned char *)ptr) = value;
+}
+
+static inline void __raw_writel(unsigned int value, unsigned int ptr)
+{
+	*((volatile unsigned int *)ptr) = value;
+}
+
+/*
+ * Some bootloaders don't turn off DMA from the ethernet MAC before
+ * jumping to linux, which means that we might end up with bits of RX
+ * status and packet data scribbled over the uncompressed kernel image.
+ * Work around this by resetting the ethernet MAC before we uncompress.
+ */
+#define PHYS_ETH_SELF_CTL		0x80010020
+#define ETH_SELF_CTL_RESET		0x00000001
+
+static inline void ep93xx_ethernet_reset(void)
+{
+	unsigned int v;
+
+	/* Reset the ethernet MAC.  */
+	v = __raw_readl(PHYS_ETH_SELF_CTL);
+	__raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL);
+
+	/* Wait for reset to finish.  */
+	while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET)
+		;
+}
+
+#define TS72XX_WDT_CONTROL_PHYS_BASE	0x23800000
+#define TS72XX_WDT_FEED_PHYS_BASE	0x23c00000
+#define TS72XX_WDT_FEED_VAL		0x05
+
+static inline void __maybe_unused ts72xx_watchdog_disable(void)
+{
+	__raw_writeb(TS72XX_WDT_FEED_VAL, TS72XX_WDT_FEED_PHYS_BASE);
+	__raw_writeb(0, TS72XX_WDT_CONTROL_PHYS_BASE);
+}
+
+static inline void ep93xx_decomp_setup(void)
+{
+	if (machine_is_ts72xx())
+		ts72xx_watchdog_disable();
+
+	if (machine_is_edb9301() ||
+	    machine_is_edb9302() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9302a() ||
+	    machine_is_edb9307() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9307a() ||
+	    machine_is_edb9312() ||
+	    machine_is_edb9315() ||
+	    machine_is_edb9315a() ||
+	    machine_is_edb9315a() ||
+	    machine_is_ts72xx() ||
+	    machine_is_bk3() ||
+	    machine_is_vision_ep9307())
+		ep93xx_ethernet_reset();
+}
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index d4f891f56996..abfed1aa2baa 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * misc.c
  * 
@@ -21,9 +22,12 @@ unsigned int __machine_arch_type;
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>
 #include <linux/linkage.h>
+#include "misc.h"
+#ifdef CONFIG_ARCH_EP93XX
+#include "misc-ep93xx.h"
+#endif
 
 static void putstr(const char *ptr);
-extern void error(char *x);
 
 #include CONFIG_UNCOMPRESS_INCLUDE
 
@@ -127,18 +131,6 @@ asmlinkage void __div0(void)
 	error("Attempting division by 0!");
 }
 
-unsigned long __stack_chk_guard;
-
-void __stack_chk_guard_setup(void)
-{
-	__stack_chk_guard = 0x000a0dff;
-}
-
-void __stack_chk_fail(void)
-{
-	error("stack-protector: Kernel stack is corrupted\n");
-}
-
 extern int do_decompress(u8 *input, int len, u8 *output, void (*error)(char *x));
 
 
@@ -149,13 +141,14 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 {
 	int ret;
 
-	__stack_chk_guard_setup();
-
 	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
+#ifdef CONFIG_ARCH_EP93XX
+	ep93xx_decomp_setup();
+#endif
 	arch_decomp_setup();
 
 	putstr("Uncompressing Linux...");
@@ -166,3 +159,8 @@ decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
 	else
 		putstr(" done, booting the kernel.\n");
 }
+
+void fortify_panic(const char *name)
+{
+	error("detected buffer overflow");
+}
diff --git a/arch/arm/boot/compressed/misc.h b/arch/arm/boot/compressed/misc.h
new file mode 100644
index 000000000000..c958dccd1d97
--- /dev/null
+++ b/arch/arm/boot/compressed/misc.h
@@ -0,0 +1,10 @@
+#ifndef MISC_H
+#define MISC_H
+
+#include <linux/compiler.h>
+
+void error(char *x) __noreturn;
+extern unsigned long free_mem_ptr;
+extern unsigned long free_mem_end_ptr;
+
+#endif
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.S
new file mode 100644
index 000000000000..27577644ee72
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.S
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+	.section .piggydata, "a"
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy_data"
+	.globl	input_data_end
+input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S
deleted file mode 100644
index a68adf91a165..000000000000
--- a/arch/arm/boot/compressed/piggy.gzip.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gzip"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lz4.S b/arch/arm/boot/compressed/piggy.lz4.S
deleted file mode 100644
index 3d9a575618a3..000000000000
--- a/arch/arm/boot/compressed/piggy.lz4.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lz4"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lzma.S b/arch/arm/boot/compressed/piggy.lzma.S
deleted file mode 100644
index d7e69cffbc0a..000000000000
--- a/arch/arm/boot/compressed/piggy.lzma.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzma"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.lzo.S b/arch/arm/boot/compressed/piggy.lzo.S
deleted file mode 100644
index a425ad95959a..000000000000
--- a/arch/arm/boot/compressed/piggy.lzo.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.lzo"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.xzkern.S b/arch/arm/boot/compressed/piggy.xzkern.S
deleted file mode 100644
index 5703f300d027..000000000000
--- a/arch/arm/boot/compressed/piggy.xzkern.S
+++ /dev/null
@@ -1,6 +0,0 @@
-	.section .piggydata,#alloc
-	.globl	input_data
-input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.xzkern"
-	.globl	input_data_end
-input_data_end:
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
index 36e53ef9200f..fcc678fce045 100644
--- a/arch/arm/boot/compressed/string.c
+++ b/arch/arm/boot/compressed/string.c
@@ -1,11 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * arch/arm/boot/compressed/string.c
  *
  * Small subset of simple string routines
  */
 
+#define __NO_FORTIFY
 #include <linux/string.h>
 
+/*
+ * The decompressor is built without KASan but uses the same redirects as the
+ * rest of the kernel when CONFIG_KASAN is enabled, defining e.g. memcpy()
+ * to __memcpy() but since we are not linking with the main kernel string
+ * library in the decompressor, that will lead to link failures.
+ *
+ * Undefine KASan's versions, define the wrapped functions and alias them to
+ * the right names so that when e.g. __memcpy() appear in the code, it will
+ * still be linked to this local version of memcpy().
+ */
+#ifdef CONFIG_KASAN
+#undef memcpy
+#undef memmove
+#undef memset
+void *__memcpy(void *__dest, __const void *__src, size_t __n) __alias(memcpy);
+void *__memmove(void *__dest, __const void *__src, size_t count) __alias(memmove);
+void *__memset(void *s, int c, size_t count) __alias(memset);
+#endif
+
 void *memcpy(void *__dest, __const void *__src, size_t __n)
 {
 	int i = 0;
@@ -65,6 +86,15 @@ size_t strlen(const char *s)
 	return sc - s;
 }
 
+size_t strnlen(const char *s, size_t count)
+{
+	const char *sc;
+
+	for (sc = s; count-- && *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
 int memcmp(const void *cs, const void *ct, size_t count)
 {
 	const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
@@ -111,6 +141,16 @@ char *strchr(const char *s, int c)
 	return (char *)s;
 }
 
+char *strrchr(const char *s, int c)
+{
+	const char *last = NULL;
+	do {
+		if (*s == (char)c)
+			last = s;
+	} while (*s++);
+	return (char *)last;
+}
+
 #undef memset
 
 void *memset(void *s, int c, size_t count)
@@ -120,8 +160,3 @@ void *memset(void *s, int c, size_t count)
 		*xs++ = c;
 	return s;
 }
-
-void __memzero(void *s, size_t count)
-{
-	memset(s, 0, count);
-}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 2b60b843ac5e..3fcb3e62dc56 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -1,10 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  *  Copyright (C) 2000 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
+#include <asm/vmlinux.lds.h>
 
 #ifdef CONFIG_CPU_ENDIAN_BE8
 #define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \
@@ -20,8 +18,12 @@ ENTRY(_start)
 SECTIONS
 {
   /DISCARD/ : {
+    COMMON_DISCARDS
     *(.ARM.exidx*)
     *(.ARM.extab*)
+    *(.note.*)
+    *(.rel.*)
+    *(.printk_index)
     /*
      * Discard any r/w data - this produces a link error if we have any,
      * which is required for PIC decompression.  Local data generates
@@ -39,35 +41,87 @@ SECTIONS
     *(.start)
     *(.text)
     *(.text.*)
-    *(.fixup)
-    *(.gnu.warning)
-    *(.glue_7t)
-    *(.glue_7)
+    ARM_STUBS_TEXT
+  }
+  .table : ALIGN(4) {
+    _table_start = .;
+    LONG(ZIMAGE_MAGIC(6))
+    LONG(ZIMAGE_MAGIC(0x5a534c4b))
+    LONG(ZIMAGE_MAGIC(__piggy_size_addr - _start))
+    LONG(ZIMAGE_MAGIC(_kernel_bss_size))
+    LONG(ZIMAGE_MAGIC(TEXT_OFFSET))
+    LONG(ZIMAGE_MAGIC(MALLOC_SIZE))
+    LONG(0)
+    _table_end = .;
   }
   .rodata : {
     *(.rodata)
     *(.rodata.*)
+    *(.data.rel.ro)
+    *(.data.rel.ro.*)
   }
   .piggydata : {
     *(.piggydata)
+    __piggy_size_addr = . - 4;
   }
 
   . = ALIGN(4);
   _etext = .;
 
   .got.plt		: { *(.got.plt) }
+#ifndef CONFIG_EFI_STUB
   _got_start = .;
   .got			: { *(.got) }
   _got_end = .;
+#endif
 
   /* ensure the zImage file size is always a multiple of 64 bits */
   /* (without a dummy byte, ld just ignores the empty section) */
   .pad			: { BYTE(0); . = ALIGN(8); }
+
+#ifdef CONFIG_EFI_STUB
+  .data : ALIGN(4096) {
+    __pecoff_data_start = .;
+    _got_start = .;
+    *(.got)
+    _got_end = .;
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub .bss.efistub)
+    __pecoff_data_end = .;
+
+    /*
+     * PE/COFF mandates a file size which is a multiple of 512 bytes if the
+     * section size equals or exceeds 4 KB
+     */
+    . = ALIGN(512);
+  }
+  __pecoff_data_rawsize = . - ADDR(.data);
+#endif
+
   _edata = .;
 
+  /*
+   * The image_end section appears after any additional loadable sections
+   * that the linker may decide to insert in the binary image.  Having
+   * this symbol allows further debug in the near future.
+   */
+  .image_end (NOLOAD) : {
+    /*
+     * EFI requires that the image is aligned to 512 bytes, and appended
+     * DTB requires that we know where the end of the image is.  Ensure
+     * that both are satisfied by ensuring that there are no additional
+     * sections emitted into the decompressor image.
+     */
+    _edata_real = .;
+  }
+
   _magic_sig = ZIMAGE_MAGIC(0x016f2818);
   _magic_start = ZIMAGE_MAGIC(_start);
   _magic_end = ZIMAGE_MAGIC(_edata);
+  _magic_table = ZIMAGE_MAGIC(_table_start - _start);
 
   . = BSS_START;
   __bss_start = .;
@@ -77,11 +131,13 @@ SECTIONS
   . = ALIGN(8);		/* the stack must be 64-bit aligned */
   .stack		: { *(.stack) }
 
-  .stab 0		: { *(.stab) }
-  .stabstr 0		: { *(.stabstr) }
-  .stab.excl 0		: { *(.stab.excl) }
-  .stab.exclstr 0	: { *(.stab.exclstr) }
-  .stab.index 0		: { *(.stab.index) }
-  .stab.indexstr 0	: { *(.stab.indexstr) }
-  .comment 0		: { *(.comment) }
+  PROVIDE(__pecoff_data_size = ALIGN(512) - ADDR(.data));
+  PROVIDE(__pecoff_end = ALIGN(512));
+
+  STABS_DEBUG
+  DWARF_DEBUG
+  ARM_DETAILS
+
+  ARM_ASSERTS
 }
+ASSERT(_edata_real == _edata, "error: zImage file size is incorrect");
diff --git a/arch/arm/boot/deflate_xip_data.sh b/arch/arm/boot/deflate_xip_data.sh
new file mode 100755
index 000000000000..304495c3c2c5
--- /dev/null
+++ b/arch/arm/boot/deflate_xip_data.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-only
+
+# XIP kernel .data segment compressor
+#
+# Created by:	Nicolas Pitre, August 2017
+# Copyright:	(C) 2017  Linaro Limited
+#
+
+# This script locates the start of the .data section in xipImage and
+# substitutes it with a compressed version. The needed offsets are obtained
+# from symbol addresses in vmlinux. It is expected that .data extends to
+# the end of xipImage.
+
+set -e
+
+VMLINUX="$1"
+XIPIMAGE="$2"
+
+DD="dd status=none"
+
+# Use "make V=1" to debug this script.
+case "$KBUILD_VERBOSE" in
+*1*)
+	set -x
+	;;
+esac
+
+sym_val() {
+	# extract hex value for symbol in $1
+	local val=$($NM "$VMLINUX" 2>/dev/null | sed -n "/ $1\$/{s/ .*$//p;q}")
+	[ "$val" ] || { echo "can't find $1 in $VMLINUX" 1>&2; exit 1; }
+	# convert from hex to decimal
+	echo $((0x$val))
+}
+
+__data_loc=$(sym_val __data_loc)
+_edata_loc=$(sym_val _edata_loc)
+base_offset=$(sym_val _xiprom)
+
+# convert to file based offsets
+data_start=$(($__data_loc - $base_offset))
+data_end=$(($_edata_loc - $base_offset))
+
+# Make sure data occupies the last part of the file.
+file_end=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" "$XIPIMAGE")
+if [ "$file_end" != "$data_end" ]; then
+	printf "end of xipImage doesn't match with _edata_loc (%#x vs %#x)\n" \
+	       $(($file_end + $base_offset)) $_edata_loc 1>&2
+	exit 1;
+fi
+
+# be ready to clean up
+trap 'rm -f "$XIPIMAGE.tmp"; exit 1' 1 2 3
+
+# substitute the data section by a compressed version
+$DD if="$XIPIMAGE" count=$data_start iflag=count_bytes of="$XIPIMAGE.tmp"
+$DD if="$XIPIMAGE"  skip=$data_start iflag=skip_bytes |
+$KGZIP -9 >> "$XIPIMAGE.tmp"
+
+# replace kernel binary
+mv -f "$XIPIMAGE.tmp" "$XIPIMAGE"
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 246473a244f6..59829fc90315 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1,13 +1,15 @@
-ifeq ($(CONFIG_OF),y)
-
+# SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_ALPINE) += \
 	alpine-db.dtb
+dtb-$(CONFIG_MACH_ARTPEC6) += \
+	artpec6-devboard.dtb
 dtb-$(CONFIG_MACH_ASM9260) += \
 	alphascale-asm9260-devkit.dtb
 # Keep at91 dtb files sorted alphabetically for each SoC
-dtb-$(CONFIG_SOC_SAM_V4_V5) += \
+dtb-$(CONFIG_SOC_AT91RM9200) += \
 	at91rm9200ek.dtb \
-	mpa1600.dtb \
+	mpa1600.dtb
+dtb-$(CONFIG_SOC_AT91SAM9) += \
 	animeo_ip.dtb \
 	at91-qil_a9260.dtb \
 	aks-cdu.dtb \
@@ -15,12 +17,15 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	evk-pro3.dtb \
 	tny_a9260.dtb \
 	usb_a9260.dtb \
+	at91sam9260ek.dtb \
 	at91sam9261ek.dtb \
 	at91sam9263ek.dtb \
+	at91-sam9_l9260.dtb \
 	tny_a9263.dtb \
 	usb_a9263.dtb \
 	at91-foxg20.dtb \
 	at91-kizbox.dtb \
+	at91-lmu5000.dtb \
 	at91sam9g20ek.dtb \
 	at91sam9g20ek_2mmc.dtb \
 	tny_a9g20.dtb \
@@ -33,35 +38,80 @@ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
 	at91-ariag25.dtb \
 	at91-ariettag25.dtb \
 	at91-cosino_mega2560.dtb \
-	at91-kizboxmini.dtb \
+	at91-kizboxmini-base.dtb \
+	at91-kizboxmini-mb.dtb \
+	at91-kizboxmini-rd.dtb \
+	at91-q5xr5.dtb \
+	at91-smartkiz.dtb \
+	at91-wb45n.dtb \
 	at91sam9g15ek.dtb \
+	at91sam9g25-gardena-smart-gateway.dtb \
 	at91sam9g25ek.dtb \
 	at91sam9g35ek.dtb \
 	at91sam9x25ek.dtb \
 	at91sam9x35ek.dtb
+dtb-$(CONFIG_SOC_SAM9X60) += \
+	at91-sam9x60_curiosity.dtb \
+	at91-sam9x60ek.dtb
 dtb-$(CONFIG_SOC_SAM_V7) += \
-	at91-kizbox2.dtb \
+	at91-kizbox2-2.dtb \
+	at91-kizbox3-hs.dtb \
+	at91-nattis-2-natte-2.dtb \
+	at91-sama5d27_som1_ek.dtb \
+	at91-sama5d27_wlsom1_ek.dtb \
+	at91-sama5d2_icp.dtb \
+	at91-sama5d2_ptc_ek.dtb \
+	at91-sama5d2_xplained.dtb \
+	at91-sama5d3_eds.dtb \
+	at91-sama5d3_ksz9477_evb.dtb \
 	at91-sama5d3_xplained.dtb \
+	at91-dvk_som60.dtb \
+	at91-gatwick.dtb \
+	at91-tse850-3.dtb \
+	at91-wb50n.dtb \
 	sama5d31ek.dtb \
 	sama5d33ek.dtb \
 	sama5d34ek.dtb \
 	sama5d35ek.dtb \
 	sama5d36ek.dtb \
+	sama5d36ek_cmp.dtb \
+	at91-sama5d4_ma5d4evk.dtb \
 	at91-sama5d4_xplained.dtb \
-	at91-sama5d4ek.dtb
-dtb-$(CONFIG_ARCH_ATLAS6) += \
-	atlas6-evb.dtb
-dtb-$(CONFIG_ARCH_ATLAS7) += \
-	atlas7-evb.dtb
+	at91-sama5d4ek.dtb \
+	at91-vinco.dtb
+dtb-$(CONFIG_SOC_SAMA7G5) += \
+	at91-sama7g5ek.dtb
+dtb-$(CONFIG_SOC_SP7021) += \
+	sunplus-sp7021-demo-v3.dtb
 dtb-$(CONFIG_ARCH_AXXIA) += \
 	axm5516-amarillo.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += \
 	bcm2835-rpi-b.dtb \
-	bcm2835-rpi-b-plus.dtb
+	bcm2835-rpi-a.dtb \
+	bcm2835-rpi-b-rev2.dtb \
+	bcm2835-rpi-b-plus.dtb \
+	bcm2835-rpi-a-plus.dtb \
+	bcm2835-rpi-cm1-io1.dtb \
+	bcm2836-rpi-2-b.dtb \
+	bcm2837-rpi-3-a-plus.dtb \
+	bcm2837-rpi-3-b.dtb \
+	bcm2837-rpi-3-b-plus.dtb \
+	bcm2837-rpi-cm3-io3.dtb \
+	bcm2837-rpi-zero-2-w.dtb \
+	bcm2711-rpi-400.dtb \
+	bcm2711-rpi-4-b.dtb \
+	bcm2711-rpi-cm4-io.dtb \
+	bcm2835-rpi-zero.dtb \
+	bcm2835-rpi-zero-w.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp.dtb \
+	bcm4708-buffalo-wzr-1166dhp2.dtb \
+	bcm4708-linksys-ea6300-v1.dtb \
+	bcm4708-linksys-ea6500-v2.dtb \
+	bcm4708-luxul-xap-1510.dtb \
 	bcm4708-luxul-xwc-1000.dtb \
 	bcm4708-netgear-r6250.dtb \
 	bcm4708-netgear-r6300-v2.dtb \
@@ -69,44 +119,113 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm47081-asus-rt-n18u.dtb \
 	bcm47081-buffalo-wzr-600dhp2.dtb \
 	bcm47081-buffalo-wzr-900dhp.dtb \
+	bcm47081-luxul-xap-1410.dtb \
+	bcm47081-luxul-xwr-1200.dtb \
+	bcm47081-tplink-archer-c5-v2.dtb \
 	bcm4709-asus-rt-ac87u.dtb \
 	bcm4709-buffalo-wxr-1900dhp.dtb \
-	bcm4709-netgear-r8000.dtb
-dtb-$(CONFIG_ARCH_BCM_63XX) += \
-	bcm963138dvt.dtb
+	bcm4709-linksys-ea9200.dtb \
+	bcm4709-netgear-r7000.dtb \
+	bcm4709-netgear-r8000.dtb \
+	bcm4709-tplink-archer-c9-v1.dtb \
+	bcm47094-asus-rt-ac88u.dtb \
+	bcm47094-dlink-dir-885l.dtb \
+	bcm47094-dlink-dir-890l.dtb \
+	bcm47094-linksys-panamera.dtb \
+	bcm47094-luxul-abr-4500.dtb \
+	bcm47094-luxul-xap-1610.dtb \
+	bcm47094-luxul-xbr-4500.dtb \
+	bcm47094-luxul-xwc-2000.dtb \
+	bcm47094-luxul-xwr-3100.dtb \
+	bcm47094-luxul-xwr-3150-v1.dtb \
+	bcm47094-netgear-r8500.dtb \
+	bcm47094-phicomm-k3.dtb \
+	bcm53015-meraki-mr26.dtb \
+	bcm53016-dlink-dwl-8610ap.dtb \
+	bcm53016-meraki-mr32.dtb \
+	bcm94708.dtb \
+	bcm94709.dtb \
+	bcm953012er.dtb \
+	bcm953012hr.dtb \
+	bcm953012k.dtb
+dtb-$(CONFIG_ARCH_BCM_53573) += \
+	bcm47189-luxul-xap-1440.dtb \
+	bcm47189-luxul-xap-810.dtb \
+	bcm47189-tenda-ac9.dtb \
+	bcm947189acdbmr.dtb
 dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
 	bcm911360_entphn.dtb \
 	bcm911360k.dtb \
 	bcm958300k.dtb \
 	bcm958305k.dtb
+dtb-$(CONFIG_ARCH_BCM_HR2) += \
+	bcm53340-ubnt-unifi-switch8.dtb
 dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
 	bcm28155-ap.dtb \
-	bcm21664-garnet.dtb
+	bcm21664-garnet.dtb \
+	bcm23550-sparrow.dtb
+dtb-$(CONFIG_ARCH_BCM_NSP) += \
+	bcm958522er.dtb \
+	bcm958525er.dtb \
+	bcm958525xmc.dtb \
+	bcm958622hr.dtb \
+	bcm958623hr.dtb \
+	bcm958625-meraki-mx64.dtb \
+	bcm958625-meraki-mx64-a0.dtb \
+	bcm958625-meraki-mx64w.dtb \
+	bcm958625-meraki-mx64w-a0.dtb \
+	bcm958625-meraki-mx65.dtb \
+	bcm958625-meraki-mx65w.dtb \
+	bcm958625hr.dtb \
+	bcm988312hr.dtb \
+	bcm958625k.dtb
 dtb-$(CONFIG_ARCH_BERLIN) += \
 	berlin2-sony-nsz-gs7.dtb \
 	berlin2cd-google-chromecast.dtb \
+	berlin2cd-valve-steamlink.dtb \
 	berlin2q-marvell-dmp.dtb
 dtb-$(CONFIG_ARCH_BRCMSTB) += \
 	bcm7445-bcm97445svmb.dtb
+dtb-$(CONFIG_ARCH_BCMBCA) += \
+	bcm947622.dtb \
+	bcm963138.dtb \
+	bcm963138dvt.dtb \
+	bcm963148.dtb \
+	bcm963178.dtb \
+	bcm96756.dtb \
+	bcm96846.dtb \
+	bcm96855.dtb \
+	bcm96878.dtb
+dtb-$(CONFIG_ARCH_CLPS711X) += \
+	ep7211-edb7211.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += \
+	da850-lcdk.dtb \
 	da850-enbw-cmc.dtb \
-	da850-evm.dtb
+	da850-evm.dtb \
+	da850-lego-ev3.dtb
 dtb-$(CONFIG_ARCH_DIGICOLOR) += \
 	cx92755_equinox.dtb
-dtb-$(CONFIG_ARCH_EFM32) += \
-	efm32gg-dk3750.dtb
+dtb-$(CONFIG_ARCH_AIROHA) += \
+	en7523-evb.dtb
 dtb-$(CONFIG_ARCH_EXYNOS3) += \
+	exynos3250-artik5-eval.dtb \
 	exynos3250-monk.dtb \
 	exynos3250-rinato.dtb
 dtb-$(CONFIG_ARCH_EXYNOS4) += \
+	exynos4210-i9100.dtb \
 	exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
 	exynos4210-universal_c210.dtb \
+	exynos4412-i9300.dtb \
+	exynos4412-i9305.dtb \
+	exynos4412-itop-elite.dtb \
+	exynos4412-n710x.dtb \
 	exynos4412-odroidu3.dtb \
 	exynos4412-odroidx.dtb \
 	exynos4412-odroidx2.dtb \
 	exynos4412-origen.dtb \
+	exynos4412-p4note-n8010.dtb \
 	exynos4412-smdk4412.dtb \
 	exynos4412-tiny4412.dtb \
 	exynos4412-trats2.dtb
@@ -114,21 +233,35 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
 	exynos5250-arndale.dtb \
 	exynos5250-smdk5250.dtb \
 	exynos5250-snow.dtb \
+	exynos5250-snow-rev5.dtb \
 	exynos5250-spring.dtb \
 	exynos5260-xyref5260.dtb \
+	exynos5410-odroidxu.dtb \
 	exynos5410-smdk5410.dtb \
 	exynos5420-arndale-octa.dtb \
 	exynos5420-peach-pit.dtb \
 	exynos5420-smdk5420.dtb \
+	exynos5420-chagall-wifi.dtb \
+	exynos5420-klimt-wifi.dtb \
+	exynos5422-odroidhc1.dtb \
 	exynos5422-odroidxu3.dtb \
 	exynos5422-odroidxu3-lite.dtb \
-	exynos5440-sd5v1.dtb \
-	exynos5440-ssdk5440.dtb \
+	exynos5422-odroidxu4.dtb \
+	exynos5422-samsung-k3g.dtb \
 	exynos5800-peach-pi.dtb
+dtb-$(CONFIG_ARCH_GEMINI) += \
+	gemini-dlink-dir-685.dtb \
+	gemini-dlink-dns-313.dtb \
+	gemini-nas4220b.dtb \
+	gemini-ns2502.dtb \
+	gemini-rut1xx.dtb \
+	gemini-sl93512r.dtb \
+	gemini-sq201.dtb \
+	gemini-ssi1328.dtb \
+	gemini-wbd111.dtb \
+	gemini-wbd222.dtb
 dtb-$(CONFIG_ARCH_HI3xxx) += \
 	hi3620-hi4511.dtb
-dtb-$(CONFIG_ARCH_HIX5HD2) += \
-	hisi-x5hd2-dkb.dtb
 dtb-$(CONFIG_ARCH_HIGHBANK) += \
 	highbank.dtb \
 	ecx-2000.dtb
@@ -136,16 +269,44 @@ dtb-$(CONFIG_ARCH_HIP01) += \
 	hip01-ca9x2.dtb
 dtb-$(CONFIG_ARCH_HIP04) += \
 	hip04-d01.dtb
+dtb-$(CONFIG_ARCH_HISI) += \
+	hi3519-demb.dtb
+dtb-$(CONFIG_ARCH_HIX5HD2) += \
+	hisi-x5hd2-dkb.dtb
+dtb-$(CONFIG_ARCH_HPE_GXP) += \
+	hpe-bmc-dl360gen10.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
+	integratorap-im-pd1.dtb \
 	integratorcp.dtb
+dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-linksys-nslu2.dtb \
+	intel-ixp42x-linksys-wrv54g.dtb \
+	intel-ixp42x-freecom-fsg-3.dtb \
+	intel-ixp42x-welltech-epbx100.dtb \
+	intel-ixp42x-ixdp425.dtb \
+	intel-ixp43x-kixrp435.dtb \
+	intel-ixp46x-ixdp465.dtb \
+	intel-ixp42x-adi-coyote.dtb \
+	intel-ixp42x-ixdpg425.dtb \
+	intel-ixp42x-goramo-multilink.dtb \
+	intel-ixp42x-iomega-nas100d.dtb \
+	intel-ixp42x-dlink-dsm-g600.dtb \
+	intel-ixp42x-gateworks-gw2348.dtb \
+	intel-ixp43x-gateworks-gw2358.dtb \
+	intel-ixp42x-netgear-wg302v1.dtb \
+	intel-ixp42x-arcom-vulcan.dtb \
+	intel-ixp42x-gateway-7001.dtb
 dtb-$(CONFIG_ARCH_KEYSTONE) += \
-	k2hk-evm.dtb \
-	k2l-evm.dtb \
-	k2e-evm.dtb
+	keystone-k2hk-evm.dtb \
+	keystone-k2l-evm.dtb \
+	keystone-k2e-evm.dtb \
+	keystone-k2g-evm.dtb \
+	keystone-k2g-ice.dtb
 dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-b3.dtb \
 	kirkwood-blackarmor-nas220.dtb \
+	kirkwood-c200-v1.dtb \
 	kirkwood-cloudbox.dtb \
 	kirkwood-d2net.dtb \
 	kirkwood-db-88f6281.dtb \
@@ -158,6 +319,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ds109.dtb \
 	kirkwood-ds110jv10.dtb \
 	kirkwood-ds111.dtb \
+	kirkwood-ds112.dtb \
 	kirkwood-ds209.dtb \
 	kirkwood-ds210.dtb \
 	kirkwood-ds212.dtb \
@@ -174,7 +336,14 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-iomega_ix2_200.dtb \
 	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
+	kirkwood-l-50.dtb \
 	kirkwood-laplug.dtb \
+	kirkwood-linkstation-lsqvl.dtb \
+	kirkwood-linkstation-lsvl.dtb \
+	kirkwood-linkstation-lswsxl.dtb \
+	kirkwood-linkstation-lswvl.dtb \
+	kirkwood-linkstation-lswxl.dtb \
+	kirkwood-linksys-viper.dtb \
 	kirkwood-lschlv2.dtb \
 	kirkwood-lsxhl.dtb \
 	kirkwood-mplcec4.dtb \
@@ -190,12 +359,16 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ns2mini.dtb \
 	kirkwood-nsa310.dtb \
 	kirkwood-nsa310a.dtb \
+	kirkwood-nsa310s.dtb \
+	kirkwood-nsa320.dtb \
+	kirkwood-nsa325.dtb \
 	kirkwood-openblocks_a6.dtb \
 	kirkwood-openblocks_a7.dtb \
 	kirkwood-openrd-base.dtb \
 	kirkwood-openrd-client.dtb \
 	kirkwood-openrd-ultimate.dtb \
 	kirkwood-pogo_e02.dtb \
+	kirkwood-pogoplug-series-4.dtb \
 	kirkwood-rd88f6192.dtb \
 	kirkwood-rd88f6281-z0.dtb \
 	kirkwood-rd88f6281-a.dtb \
@@ -211,20 +384,42 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-ts419-6281.dtb \
 	kirkwood-ts419-6282.dtb
 dtb-$(CONFIG_ARCH_LPC18XX) += \
+	lpc4337-ciaa.dtb \
 	lpc4350-hitex-eval.dtb \
-	lpc4357-ea4357-devkit.dtb
+	lpc4357-ea4357-devkit.dtb \
+	lpc4357-myd-lpc4357.dtb
 dtb-$(CONFIG_ARCH_LPC32XX) += \
-	ea3250.dtb phy3250.dtb
+	lpc3250-ea3250.dtb \
+	lpc3250-phy3250.dtb
+dtb-$(CONFIG_ARCH_WPCM450) += \
+	nuvoton-wpcm450-supermicro-x9sci-ln4f.dtb
+dtb-$(CONFIG_ARCH_NPCM7XX) += \
+	nuvoton-npcm730-gsj.dtb \
+	nuvoton-npcm730-gbs.dtb \
+	nuvoton-npcm730-kudo.dtb \
+	nuvoton-npcm750-evb.dtb \
+	nuvoton-npcm750-runbmc-olympus.dtb
 dtb-$(CONFIG_MACH_MESON6) += \
 	meson6-atv1200.dtb
 dtb-$(CONFIG_MACH_MESON8) += \
-	meson8-minix-neo-x8.dtb
+	meson8-minix-neo-x8.dtb \
+	meson8b-ec100.dtb \
+	meson8b-mxq.dtb \
+	meson8b-odroidc1.dtb \
+	meson8m2-mxiii-plus.dtb
 dtb-$(CONFIG_ARCH_MMP) += \
 	pxa168-aspenite.dtb \
 	pxa910-dkb.dtb \
-	mmp2-brownstone.dtb
+	mmp2-brownstone.dtb \
+	mmp2-olpc-xo-1-75.dtb \
+	mmp3-dell-ariel.dtb
+dtb-$(CONFIG_ARCH_MPS2) += \
+	mps2-an385.dtb \
+	mps2-an399.dtb
 dtb-$(CONFIG_ARCH_MOXART) += \
 	moxart-uc7112lx.dtb
+dtb-$(CONFIG_ARCH_SD5203) += \
+	sd5203.dtb
 dtb-$(CONFIG_SOC_IMX1) += \
 	imx1-ads.dtb \
 	imx1-apf9328.dtb
@@ -243,62 +438,160 @@ dtb-$(CONFIG_SOC_IMX27) += \
 	imx27-phytec-phycore-rdk.dtb \
 	imx27-phytec-phycard-s-rdk.dtb
 dtb-$(CONFIG_SOC_IMX31) += \
-	imx31-bug.dtb
+	imx31-bug.dtb \
+	imx31-lite.dtb
 dtb-$(CONFIG_SOC_IMX35) += \
 	imx35-eukrea-mbimxsd35-baseboard.dtb \
 	imx35-pdk.dtb
 dtb-$(CONFIG_SOC_IMX50) += \
-	imx50-evk.dtb
+	imx50-evk.dtb \
+	imx50-kobo-aura.dtb
 dtb-$(CONFIG_SOC_IMX51) += \
 	imx51-apf51.dtb \
 	imx51-apf51dev.dtb \
 	imx51-babbage.dtb \
 	imx51-digi-connectcore-jsk.dtb \
-	imx51-eukrea-mbimxsd51-baseboard.dtb
+	imx51-eukrea-mbimxsd51-baseboard.dtb \
+	imx51-ts4800.dtb \
+	imx51-zii-rdu1.dtb \
+	imx51-zii-scu2-mezz.dtb \
+	imx51-zii-scu3-esb.dtb
 dtb-$(CONFIG_SOC_IMX53) += \
 	imx53-ard.dtb \
+	imx53-cx9020.dtb \
+	imx53-kp-ddc.dtb \
+	imx53-kp-hsc.dtb \
 	imx53-m53evk.dtb \
+	imx53-m53menlo.dtb \
 	imx53-mba53.dtb \
+	imx53-ppd.dtb \
 	imx53-qsb.dtb \
 	imx53-qsrb.dtb \
+	imx53-sk-imx53.dtb \
 	imx53-smd.dtb \
 	imx53-tx53-x03x.dtb \
 	imx53-tx53-x13x.dtb \
+	imx53-usbarmory.dtb \
 	imx53-voipac-bsb.dtb
 dtb-$(CONFIG_SOC_IMX6Q) += \
+	imx6dl-alti6p.dtb \
 	imx6dl-apf6dev.dtb \
 	imx6dl-aristainetos_4.dtb \
 	imx6dl-aristainetos_7.dtb \
 	imx6dl-aristainetos2_4.dtb \
 	imx6dl-aristainetos2_7.dtb \
+	imx6dl-colibri-aster.dtb \
+	imx6dl-colibri-eval-v3.dtb \
+	imx6dl-colibri-iris.dtb \
+	imx6dl-colibri-iris-v2.dtb \
 	imx6dl-cubox-i.dtb \
+	imx6dl-cubox-i-emmc-som-v15.dtb \
+	imx6dl-cubox-i-som-v15.dtb \
 	imx6dl-dfi-fs700-m60.dtb \
+	imx6dl-dhcom-picoitx.dtb \
+	imx6dl-eckelmann-ci4x10.dtb \
+	imx6dl-emcon-avari.dtb \
 	imx6dl-gw51xx.dtb \
 	imx6dl-gw52xx.dtb \
 	imx6dl-gw53xx.dtb \
 	imx6dl-gw54xx.dtb \
 	imx6dl-gw551x.dtb \
 	imx6dl-gw552x.dtb \
+	imx6dl-gw553x.dtb \
+	imx6dl-gw560x.dtb \
+	imx6dl-gw5903.dtb \
+	imx6dl-gw5904.dtb \
+	imx6dl-gw5907.dtb \
+	imx6dl-gw5910.dtb \
+	imx6dl-gw5912.dtb \
+	imx6dl-gw5913.dtb \
 	imx6dl-hummingboard.dtb \
+	imx6dl-hummingboard-emmc-som-v15.dtb \
+	imx6dl-hummingboard-som-v15.dtb \
+	imx6dl-hummingboard2.dtb \
+	imx6dl-hummingboard2-emmc-som-v15.dtb \
+	imx6dl-hummingboard2-som-v15.dtb \
+	imx6dl-icore.dtb \
+	imx6dl-icore-mipi.dtb \
+	imx6dl-icore-rqs.dtb \
+	imx6dl-lanmcu.dtb \
+	imx6dl-mamoj.dtb \
+	imx6dl-mba6a.dtb \
+	imx6dl-mba6b.dtb \
+	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
+	imx6dl-phytec-mira-rdk-nand.dtb \
 	imx6dl-phytec-pbab01.dtb \
+	imx6dl-pico-dwarf.dtb \
+	imx6dl-pico-hobbit.dtb \
+	imx6dl-pico-nymph.dtb \
+	imx6dl-pico-pi.dtb \
+	imx6dl-plybas.dtb \
+	imx6dl-plym2m.dtb \
+	imx6dl-prtmvt.dtb \
+	imx6dl-prtrvt.dtb \
+	imx6dl-prtvt7.dtb \
 	imx6dl-rex-basic.dtb \
 	imx6dl-riotboard.dtb \
 	imx6dl-sabreauto.dtb \
 	imx6dl-sabrelite.dtb \
 	imx6dl-sabresd.dtb \
+	imx6dl-savageboard.dtb \
+	imx6dl-skov-revc-lt2.dtb \
+	imx6dl-skov-revc-lt6.dtb \
+	imx6dl-solidsense.dtb \
+	imx6dl-ts4900.dtb \
+	imx6dl-ts7970.dtb \
 	imx6dl-tx6dl-comtft.dtb \
+	imx6dl-tx6s-8034.dtb \
+	imx6dl-tx6s-8034-mb7.dtb \
+	imx6dl-tx6s-8035.dtb \
+	imx6dl-tx6s-8035-mb7.dtb \
 	imx6dl-tx6u-801x.dtb \
+	imx6dl-tx6u-80xx-mb7.dtb \
+	imx6dl-tx6u-8033.dtb \
+	imx6dl-tx6u-8033-mb7.dtb \
 	imx6dl-tx6u-811x.dtb \
+	imx6dl-tx6u-81xx-mb7.dtb \
 	imx6dl-udoo.dtb \
+	imx6dl-victgo.dtb \
+	imx6dl-vicut1.dtb \
 	imx6dl-wandboard.dtb \
 	imx6dl-wandboard-revb1.dtb \
+	imx6dl-wandboard-revd1.dtb \
+	imx6dl-yapp4-draco.dtb \
+	imx6dl-yapp4-hydra.dtb \
+	imx6dl-yapp4-lynx.dtb \
+	imx6dl-yapp4-orion.dtb \
+	imx6dl-yapp4-phoenix.dtb \
+	imx6dl-yapp4-ursa.dtb \
+	imx6q-apalis-eval.dtb \
+	imx6q-apalis-ixora.dtb \
+	imx6q-apalis-ixora-v1.1.dtb \
+	imx6q-apalis-ixora-v1.2.dtb \
 	imx6q-apf6dev.dtb \
 	imx6q-arm2.dtb \
+	imx6q-b450v3.dtb \
+	imx6q-b650v3.dtb \
+	imx6q-b850v3.dtb \
+	imx6q-bosch-acc.dtb \
 	imx6q-cm-fx6.dtb \
 	imx6q-cubox-i.dtb \
+	imx6q-cubox-i-emmc-som-v15.dtb \
+	imx6q-cubox-i-som-v15.dtb \
 	imx6q-dfi-fs700-m60.dtb \
+	imx6q-dhcom-pdk2.dtb \
+	imx6q-display5-tianma-tm070-1280x768.dtb \
 	imx6q-dmo-edmqmx6.dtb \
+	imx6q-dms-ba16.dtb \
+	imx6q-ds.dtb \
+	imx6q-emcon-avari.dtb \
+	imx6q-evi.dtb \
+	imx6dl-b105pv2.dtb \
+	imx6dl-b105v2.dtb \
+	imx6dl-b125v2.dtb \
+	imx6dl-b125pv2.dtb \
+	imx6dl-b155v2.dtb \
 	imx6q-gk802.dtb \
 	imx6q-gw51xx.dtb \
 	imx6q-gw52xx.dtb \
@@ -307,45 +600,245 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6q-gw54xx.dtb \
 	imx6q-gw551x.dtb \
 	imx6q-gw552x.dtb \
+	imx6q-gw553x.dtb \
+	imx6q-gw560x.dtb \
+	imx6q-gw5903.dtb \
+	imx6q-gw5904.dtb \
+	imx6q-gw5907.dtb \
+	imx6q-gw5910.dtb \
+	imx6q-gw5912.dtb \
+	imx6q-gw5913.dtb \
+	imx6q-h100.dtb \
 	imx6q-hummingboard.dtb \
+	imx6q-hummingboard-emmc-som-v15.dtb \
+	imx6q-hummingboard-som-v15.dtb \
+	imx6q-hummingboard2.dtb \
+	imx6q-hummingboard2-emmc-som-v15.dtb \
+	imx6q-hummingboard2-som-v15.dtb \
+	imx6q-icore.dtb \
+	imx6q-icore-mipi.dtb \
+	imx6q-icore-ofcap10.dtb \
+	imx6q-icore-ofcap12.dtb \
+	imx6q-icore-rqs.dtb \
+	imx6q-kp-tpc.dtb \
+	imx6q-logicpd.dtb \
+	imx6q-marsboard.dtb \
+	imx6q-mba6a.dtb \
+	imx6q-mba6b.dtb \
+	imx6q-mccmon6.dtb \
 	imx6q-nitrogen6x.dtb \
+	imx6q-nitrogen6_max.dtb \
+	imx6q-nitrogen6_som2.dtb \
+	imx6q-novena.dtb \
+	imx6q-phytec-mira-rdk-emmc.dtb \
+	imx6q-phytec-mira-rdk-nand.dtb \
 	imx6q-phytec-pbab01.dtb \
+	imx6q-pico-dwarf.dtb \
+	imx6q-pico-hobbit.dtb \
+	imx6q-pico-nymph.dtb \
+	imx6q-pico-pi.dtb \
+	imx6q-pistachio.dtb \
+	imx6q-prti6q.dtb \
+	imx6q-prtwd2.dtb \
 	imx6q-rex-pro.dtb \
 	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb \
+	imx6q-savageboard.dtb \
 	imx6q-sbc6x.dtb \
+	imx6q-skov-revc-lt2.dtb \
+	imx6q-skov-revc-lt6.dtb \
+	imx6q-skov-reve-mi1010ait-1cp1.dtb \
+	imx6q-solidsense.dtb \
 	imx6q-tbs2910.dtb \
+	imx6q-ts4900.dtb \
+	imx6q-ts7970.dtb \
 	imx6q-tx6q-1010.dtb \
 	imx6q-tx6q-1010-comtft.dtb \
 	imx6q-tx6q-1020.dtb \
 	imx6q-tx6q-1020-comtft.dtb \
+	imx6q-tx6q-1036.dtb \
+	imx6q-tx6q-1036-mb7.dtb \
+	imx6q-tx6q-10x0-mb7.dtb \
 	imx6q-tx6q-1110.dtb \
+	imx6q-tx6q-11x0-mb7.dtb \
 	imx6q-udoo.dtb \
+	imx6q-utilite-pro.dtb \
+	imx6q-var-dt6customboard.dtb \
+	imx6q-vicut1.dtb \
 	imx6q-wandboard.dtb \
-	imx6q-wandboard-revb1.dtb
+	imx6q-wandboard-revb1.dtb \
+	imx6q-wandboard-revd1.dtb \
+	imx6q-yapp4-crux.dtb \
+	imx6q-yapp4-pegasus.dtb \
+	imx6q-zii-rdu2.dtb \
+	imx6qp-mba6b.dtb \
+	imx6qp-nitrogen6_max.dtb \
+	imx6qp-nitrogen6_som2.dtb \
+	imx6qp-phytec-mira-rdk-nand.dtb \
+	imx6qp-prtwd3.dtb \
+	imx6qp-sabreauto.dtb \
+	imx6qp-sabresd.dtb \
+	imx6qp-tx6qp-8037.dtb \
+	imx6qp-tx6qp-8037-mb7.dtb \
+	imx6qp-tx6qp-8137.dtb \
+	imx6qp-tx6qp-8137-mb7.dtb \
+	imx6qp-vicutp.dtb \
+	imx6qp-wandboard-revd1.dtb \
+	imx6qp-yapp4-crux-plus.dtb \
+	imx6qp-yapp4-pegasus-plus.dtb \
+	imx6qp-zii-rdu2.dtb \
+	imx6s-dhcom-drc02.dtb
 dtb-$(CONFIG_SOC_IMX6SL) += \
 	imx6sl-evk.dtb \
+	imx6sl-kobo-aura2.dtb \
+	imx6sl-tolino-shine2hd.dtb \
+	imx6sl-tolino-shine3.dtb \
+	imx6sl-tolino-vision.dtb \
+	imx6sl-tolino-vision5.dtb \
 	imx6sl-warp.dtb
+dtb-$(CONFIG_SOC_IMX6SLL) += \
+	imx6sll-evk.dtb \
+	imx6sll-kobo-clarahd.dtb \
+	imx6sll-kobo-librah2o.dtb
 dtb-$(CONFIG_SOC_IMX6SX) += \
+	imx6sx-nitrogen6sx.dtb \
 	imx6sx-sabreauto.dtb \
 	imx6sx-sdb-reva.dtb \
-	imx6sx-sdb.dtb
+	imx6sx-sdb-sai.dtb \
+	imx6sx-sdb.dtb \
+	imx6sx-sdb-mqs.dtb \
+	imx6sx-softing-vining-2000.dtb \
+	imx6sx-udoo-neo-basic.dtb \
+	imx6sx-udoo-neo-extended.dtb \
+	imx6sx-udoo-neo-full.dtb
+dtb-$(CONFIG_SOC_IMX6UL) += \
+	imx6ul-14x14-evk.dtb \
+	imx6ul-ccimx6ulsbcexpress.dtb \
+	imx6ul-ccimx6ulsbcpro.dtb \
+	imx6ul-geam.dtb \
+	imx6ul-isiot-emmc.dtb \
+	imx6ul-isiot-nand.dtb \
+	imx6ul-kontron-bl.dtb \
+	imx6ul-kontron-bl-43.dtb \
+	imx6ul-liteboard.dtb \
+	imx6ul-tqma6ul1-mba6ulx.dtb \
+	imx6ul-tqma6ul2-mba6ulx.dtb \
+	imx6ul-tqma6ul2l-mba6ulx.dtb \
+	imx6ul-opos6uldev.dtb \
+	imx6ul-pico-dwarf.dtb \
+	imx6ul-pico-hobbit.dtb \
+	imx6ul-pico-pi.dtb \
+	imx6ul-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ul-phytec-segin-ff-rdk-nand.dtb \
+	imx6ul-prti6g.dtb \
+	imx6ul-tx6ul-0010.dtb \
+	imx6ul-tx6ul-0011.dtb \
+	imx6ul-tx6ul-mainboard.dtb \
+	imx6ull-14x14-evk.dtb \
+	imx6ull-colibri-aster.dtb \
+	imx6ull-colibri-emmc-aster.dtb \
+	imx6ull-colibri-emmc-eval-v3.dtb \
+	imx6ull-colibri-emmc-iris.dtb \
+	imx6ull-colibri-emmc-iris-v2.dtb \
+	imx6ull-colibri-eval-v3.dtb \
+	imx6ull-colibri-iris.dtb \
+	imx6ull-colibri-iris-v2.dtb \
+	imx6ull-colibri-wifi-aster.dtb \
+	imx6ull-colibri-wifi-eval-v3.dtb \
+	imx6ull-colibri-wifi-iris.dtb \
+	imx6ull-colibri-wifi-iris-v2.dtb \
+	imx6ull-dhcom-drc02.dtb \
+	imx6ull-dhcom-pdk2.dtb \
+	imx6ull-dhcom-picoitx.dtb \
+	imx6ull-jozacp.dtb \
+	imx6ull-kontron-bl.dtb \
+	imx6ull-myir-mys-6ulx-eval.dtb \
+	imx6ull-opos6uldev.dtb \
+	imx6ull-phytec-segin-ff-rdk-nand.dtb \
+	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
+	imx6ull-phytec-segin-lc-rdk-nand.dtb \
+	imx6ull-phytec-tauri-emmc.dtb \
+	imx6ull-phytec-tauri-nand.dtb \
+	imx6ull-tarragon-master.dtb \
+	imx6ull-tarragon-micro.dtb \
+	imx6ull-tarragon-slave.dtb \
+	imx6ull-tarragon-slavext.dtb \
+	imx6ull-tqma6ull2-mba6ulx.dtb \
+	imx6ull-tqma6ull2l-mba6ulx.dtb \
+	imx6ulz-14x14-evk.dtb \
+	imx6ulz-bsh-smm-m2.dtb
 dtb-$(CONFIG_SOC_IMX7D) += \
-	imx7d-sdb.dtb
+	imx7d-cl-som-imx7.dtb \
+	imx7d-colibri-aster.dtb \
+	imx7d-colibri-emmc-aster.dtb \
+	imx7d-colibri-emmc-iris.dtb \
+	imx7d-colibri-emmc-iris-v2.dtb \
+	imx7d-colibri-emmc-eval-v3.dtb \
+	imx7d-colibri-eval-v3.dtb \
+	imx7d-colibri-iris.dtb \
+	imx7d-colibri-iris-v2.dtb \
+	imx7d-flex-concentrator.dtb \
+	imx7d-flex-concentrator-mfg.dtb \
+	imx7d-mba7.dtb \
+	imx7d-meerkat96.dtb \
+	imx7d-nitrogen7.dtb \
+	imx7d-pico-dwarf.dtb \
+	imx7d-pico-hobbit.dtb \
+	imx7d-pico-nymph.dtb \
+	imx7d-pico-pi.dtb \
+	imx7d-remarkable2.dtb \
+	imx7d-sbc-imx7.dtb \
+	imx7d-sdb.dtb \
+	imx7d-sdb-reva.dtb \
+	imx7d-sdb-sht11.dtb \
+	imx7d-smegw01.dtb \
+	imx7d-zii-rmu2.dtb \
+	imx7d-zii-rpu2.dtb \
+	imx7s-colibri-aster.dtb \
+	imx7s-colibri-eval-v3.dtb \
+	imx7s-colibri-iris.dtb \
+	imx7s-colibri-iris-v2.dtb \
+	imx7s-mba7.dtb \
+	imx7s-warp.dtb
+dtb-$(CONFIG_SOC_IMX7ULP) += \
+	imx7ulp-com.dtb \
+	imx7ulp-evk.dtb
+dtb-$(CONFIG_SOC_IMXRT) += \
+	imxrt1050-evk.dtb
+dtb-$(CONFIG_SOC_LAN966) += \
+	lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb \
+	lan966x-kontron-kswitch-d10-mmt-8g.dtb \
+	lan966x-pcb8290.dtb \
+	lan966x-pcb8291.dtb \
+	lan966x-pcb8309.dtb
 dtb-$(CONFIG_SOC_LS1021A) += \
+	ls1021a-iot.dtb \
+	ls1021a-moxa-uc-8410a.dtb \
 	ls1021a-qds.dtb \
+	ls1021a-tsn.dtb \
 	ls1021a-twr.dtb
 dtb-$(CONFIG_SOC_VF610) += \
 	vf500-colibri-eval-v3.dtb \
+	vf610-bk4.dtb \
 	vf610-colibri-eval-v3.dtb \
 	vf610m4-colibri.dtb \
 	vf610-cosmic.dtb \
-	vf610-twr.dtb
+	vf610m4-cosmic.dtb \
+	vf610-twr.dtb \
+	vf610-zii-cfu1.dtb \
+	vf610-zii-dev-rev-b.dtb \
+	vf610-zii-dev-rev-c.dtb \
+	vf610-zii-scu4-aib.dtb \
+	vf610-zii-spb4.dtb \
+	vf610-zii-ssmb-dtu.dtb \
+	vf610-zii-ssmb-spu3.dtb
 dtb-$(CONFIG_ARCH_MXS) += \
 	imx23-evk.dtb \
 	imx23-olinuxino.dtb \
+	imx23-sansa.dtb \
 	imx23-stmp378x_devb.dtb \
+	imx23-xfi3.dtb \
 	imx28-apf28.dtb \
 	imx28-apf28dev.dtb \
 	imx28-apx4devkit.dtb \
@@ -356,6 +849,10 @@ dtb-$(CONFIG_ARCH_MXS) += \
 	imx28-cfa10056.dtb \
 	imx28-cfa10057.dtb \
 	imx28-cfa10058.dtb \
+	imx28-duckbill-2-485.dtb \
+	imx28-duckbill-2.dtb \
+	imx28-duckbill-2-enocean.dtb \
+	imx28-duckbill-2-spi.dtb \
 	imx28-duckbill.dtb \
 	imx28-eukrea-mbmx283lc.dtb \
 	imx28-eukrea-mbmx287lc.dtb \
@@ -363,7 +860,9 @@ dtb-$(CONFIG_ARCH_MXS) += \
 	imx28-m28cu3.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
-	imx28-tx28.dtb
+	imx28-ts4600.dtb \
+	imx28-tx28.dtb \
+	imx28-xea.dtb
 dtb-$(CONFIG_ARCH_NOMADIK) += \
 	ste-nomadik-s8815.dtb \
 	ste-nomadik-nhk15.dtb
@@ -382,19 +881,25 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	logicpd-torpedo-37xx-devkit.dtb \
+	logicpd-som-lv-37xx-devkit.dtb \
 	omap3430-sdp.dtb \
 	omap3-beagle.dtb \
+	omap3-beagle-ab4.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-beagle-xm-ab.dtb \
 	omap3-cm-t3517.dtb \
 	omap3-cm-t3530.dtb \
 	omap3-cm-t3730.dtb \
 	omap3-devkit8000.dtb \
+	omap3-devkit8000-lcd43.dtb \
+	omap3-devkit8000-lcd70.dtb \
+	omap3-echo.dtb \
 	omap3-evm.dtb \
 	omap3-evm-37xx.dtb \
 	omap3-gta04a3.dtb \
 	omap3-gta04a4.dtb \
 	omap3-gta04a5.dtb \
+	omap3-gta04a5one.dtb \
 	omap3-ha.dtb \
 	omap3-ha-lcd.dtb \
 	omap3-igep0020.dtb \
@@ -409,38 +914,76 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
 	omap3-overo-alto35.dtb \
 	omap3-overo-chestnut43.dtb \
 	omap3-overo-gallop43.dtb \
+	omap3-overo-palo35.dtb \
 	omap3-overo-palo43.dtb \
 	omap3-overo-storm-alto35.dtb \
 	omap3-overo-storm-chestnut43.dtb \
 	omap3-overo-storm-gallop43.dtb \
+	omap3-overo-storm-palo35.dtb \
 	omap3-overo-storm-palo43.dtb \
 	omap3-overo-storm-summit.dtb \
 	omap3-overo-storm-tobi.dtb \
+	omap3-overo-storm-tobiduo.dtb \
 	omap3-overo-summit.dtb \
 	omap3-overo-tobi.dtb \
+	omap3-overo-tobiduo.dtb \
 	omap3-pandora-600mhz.dtb \
 	omap3-pandora-1ghz.dtb \
 	omap3-sbc-t3517.dtb \
 	omap3-sbc-t3530.dtb \
 	omap3-sbc-t3730.dtb \
+	omap3-sniper.dtb \
 	omap3-thunder.dtb \
 	omap3-zoom3.dtb
 dtb-$(CONFIG_SOC_TI81XX) += \
-	dm8168-evm.dtb
+	am3874-iceboard.dtb \
+	dm8148-evm.dtb \
+	dm8148-t410.dtb \
+	dm8168-evm.dtb \
+	dra62x-j5eco-evm.dtb
 dtb-$(CONFIG_SOC_AM33XX) += \
+	am335x-baltos-ir2110.dtb \
+	am335x-baltos-ir3220.dtb \
 	am335x-baltos-ir5221.dtb \
 	am335x-base0033.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
-	am335x-sl50.dtb \
+	am335x-boneblack-wireless.dtb \
+	am335x-boneblue.dtb \
+	am335x-bonegreen.dtb \
+	am335x-bonegreen-wireless.dtb \
+	am335x-chiliboard.dtb \
+	am335x-cm-t335.dtb \
 	am335x-evm.dtb \
 	am335x-evmsk.dtb \
+	am335x-guardian.dtb \
+	am335x-icev2.dtb \
+	am335x-lxm.dtb \
+	am335x-moxa-uc-2101.dtb \
+	am335x-moxa-uc-8100-me-t.dtb \
+	am335x-myirtech-myd.dtb \
 	am335x-nano.dtb \
+	am335x-netcan-plus-1xx.dtb \
+	am335x-netcom-plus-2xx.dtb \
+	am335x-netcom-plus-8xx.dtb \
+	am335x-pdu001.dtb \
 	am335x-pepper.dtb \
-	am335x-lxm.dtb \
-	am335x-chiliboard.dtb
+	am335x-phycore-rdk.dtb \
+	am335x-pocketbeagle.dtb \
+	am335x-regor-rdk.dtb \
+	am335x-sancloud-bbe.dtb \
+	am335x-sancloud-bbe-lite.dtb \
+	am335x-sancloud-bbe-extended-wifi.dtb \
+	am335x-shc.dtb \
+	am335x-sbc-t335.dtb \
+	am335x-sl50.dtb \
+	am335x-wega-rdk.dtb \
+	am335x-osd3358-sm-red.dtb
 dtb-$(CONFIG_ARCH_OMAP4) += \
+	omap4-droid-bionic-xt875.dtb \
+	omap4-droid4-xt894.dtb \
 	omap4-duovero-parlor.dtb \
+	omap4-kc1.dtb \
 	omap4-panda.dtb \
 	omap4-panda-a4.dtb \
 	omap4-panda-es.dtb \
@@ -450,80 +993,224 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
 	omap4-var-stk-om44.dtb
 dtb-$(CONFIG_SOC_AM43XX) += \
 	am43x-epos-evm.dtb \
-	am437x-sk-evm.dtb \
+	am437x-cm-t43.dtb \
+	am437x-gp-evm.dtb \
 	am437x-idk-evm.dtb \
-	am437x-gp-evm.dtb
+	am437x-sbc-t43.dtb \
+	am437x-sk-evm.dtb
 dtb-$(CONFIG_SOC_OMAP5) += \
 	omap5-cm-t54.dtb \
+	omap5-igep0050.dtb \
 	omap5-sbc-t54.dtb \
 	omap5-uevm.dtb
+am57xx-evm-dtbs := am57xx-beagle-x15.dtb am57xx-evm.dtbo
+am57xx-evm-reva3-dtbs := am57xx-beagle-x15-revc.dtb am57xx-evm.dtbo
 dtb-$(CONFIG_SOC_DRA7XX) += \
-	dra7-evm.dtb \
 	am57xx-beagle-x15.dtb \
-	dra72-evm.dtb
+	am57xx-beagle-x15-revb1.dtb \
+	am57xx-beagle-x15-revc.dtb \
+	am57xx-evm.dtb \
+	am57xx-evm-reva3.dtb \
+	am5729-beagleboneai.dtb \
+	am57xx-cl-som-am57x.dtb \
+	am57xx-sbc-am57x.dtb \
+	am572x-idk.dtb \
+	am572x-idk-touchscreen.dtbo \
+	am571x-idk.dtb \
+	am571x-idk-touchscreen.dtbo \
+	am574x-idk.dtb \
+	am57xx-idk-lcd-osd101t2045.dtbo \
+	am57xx-idk-lcd-osd101t2587.dtbo \
+	dra7-evm.dtb \
+	dra72-evm.dtb \
+	dra72-evm-revc.dtb \
+	dra71-evm.dtb \
+	dra76-evm.dtb
 dtb-$(CONFIG_ARCH_ORION5X) += \
+	orion5x-kuroboxpro.dtb \
 	orion5x-lacie-d2-network.dtb \
 	orion5x-lacie-ethernet-disk-mini-v2.dtb \
+	orion5x-linkstation-lsgl.dtb \
+	orion5x-linkstation-lswtgl.dtb \
+	orion5x-linkstation-lschl.dtb \
+	orion5x-lswsgl.dtb \
 	orion5x-maxtor-shared-storage-2.dtb \
+	orion5x-netgear-wnr854t.dtb \
 	orion5x-rd88f5182-nas.dtb
-dtb-$(CONFIG_ARCH_PRIMA2) += \
-	prima2-evb.dtb
+dtb-$(CONFIG_ARCH_ACTIONS) += \
+	owl-s500-cubieboard6.dtb \
+	owl-s500-guitar-bb-rev-b.dtb \
+	owl-s500-labrador-base-m.dtb \
+	owl-s500-roseapplepi.dtb \
+	owl-s500-sparky.dtb
+dtb-$(CONFIG_ARCH_PXA) += \
+	pxa300-raumfeld-connector.dtb \
+	pxa300-raumfeld-controller.dtb \
+	pxa300-raumfeld-speaker-l.dtb \
+	pxa300-raumfeld-speaker-m.dtb \
+	pxa300-raumfeld-speaker-one.dtb \
+	pxa300-raumfeld-speaker-s.dtb
 dtb-$(CONFIG_ARCH_QCOM) += \
+	qcom-apq8016-sbc.dtb \
+	qcom-apq8026-asus-sparrow.dtb \
+	qcom-apq8026-huawei-sturgeon.dtb \
+	qcom-apq8026-lg-lenok.dtb \
+	qcom-apq8026-samsung-matisse-wifi.dtb \
+	qcom-apq8060-dragonboard.dtb \
 	qcom-apq8064-cm-qs600.dtb \
 	qcom-apq8064-ifc6410.dtb \
+	qcom-apq8064-sony-xperia-lagan-yuga.dtb \
+	qcom-apq8064-asus-nexus7-flo.dtb \
 	qcom-apq8074-dragonboard.dtb \
 	qcom-apq8084-ifc6540.dtb \
 	qcom-apq8084-mtp.dtb \
+	qcom-ipq4018-ap120c-ac.dtb \
+	qcom-ipq4018-ap120c-ac-bit.dtb \
+	qcom-ipq4018-jalapeno.dtb \
+	qcom-ipq4019-ap.dk01.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c1.dtb \
+	qcom-ipq4019-ap.dk04.1-c3.dtb \
+	qcom-ipq4019-ap.dk07.1-c1.dtb \
+	qcom-ipq4019-ap.dk07.1-c2.dtb \
 	qcom-ipq8064-ap148.dtb \
+	qcom-ipq8064-rb3011.dtb \
+	qcom-msm8226-samsung-s3ve3g.dtb \
 	qcom-msm8660-surf.dtb \
+	qcom-msm8916-samsung-e5.dtb \
+	qcom-msm8916-samsung-e7.dtb \
+	qcom-msm8916-samsung-grandmax.dtb \
+	qcom-msm8916-samsung-serranove.dtb \
 	qcom-msm8960-cdp.dtb \
-	qcom-msm8974-sony-xperia-honami.dtb
+	qcom-msm8974-lge-nexus5-hammerhead.dtb \
+	qcom-msm8974-sony-xperia-rhine-amami.dtb \
+	qcom-msm8974-sony-xperia-rhine-honami.dtb \
+	qcom-msm8974pro-fairphone-fp2.dtb \
+	qcom-msm8974pro-oneplus-bacon.dtb \
+	qcom-msm8974pro-samsung-klte.dtb \
+	qcom-msm8974pro-sony-xperia-shinano-castor.dtb \
+	qcom-mdm9615-wp8548-mangoh-green.dtb \
+	qcom-sdx55-mtp.dtb \
+	qcom-sdx55-t55.dtb \
+	qcom-sdx55-telit-fn980-tlb.dtb \
+	qcom-sdx65-mtp.dtb
+dtb-$(CONFIG_ARCH_RDA) += \
+	rda8810pl-orangepi-2g-iot.dtb \
+	rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+	rtd1195-horseradish.dtb \
+	rtd1195-mele-x1000.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
-	arm-realview-pb1176.dtb
+	arm-realview-pb1176.dtb \
+	arm-realview-pb11mp.dtb \
+	arm-realview-eb.dtb \
+	arm-realview-eb-bbrevd.dtb \
+	arm-realview-eb-11mp.dtb \
+	arm-realview-eb-11mp-bbrevd.dtb \
+	arm-realview-eb-11mp-ctrevb.dtb \
+	arm-realview-eb-11mp-bbrevd-ctrevb.dtb \
+	arm-realview-eb-a9mp.dtb \
+	arm-realview-eb-a9mp-bbrevd.dtb \
+	arm-realview-pba8.dtb \
+	arm-realview-pbx-a9.dtb
+dtb-$(CONFIG_ARCH_RENESAS) += \
+	emev2-kzm9d.dtb \
+	r7s72100-genmai.dtb \
+	r7s72100-gr-peach.dtb \
+	r7s72100-rskrza1.dtb \
+	r7s9210-rza2mevb.dtb \
+	r8a73a4-ape6evm.dtb \
+	r8a7740-armadillo800eva.dtb \
+	r8a7742-iwg21d-q7.dtb \
+	r8a7742-iwg21d-q7-dbcm-ca.dtb \
+	r8a7743-iwg20d-q7.dtb \
+	r8a7743-iwg20d-q7-dbcm-ca.dtb \
+	r8a7743-sk-rzg1m.dtb \
+	r8a7744-iwg20d-q7.dtb \
+	r8a7744-iwg20d-q7-dbcm-ca.dtb \
+	r8a7745-iwg22d-sodimm.dtb \
+	r8a7745-iwg22d-sodimm-dbhd-ca.dtb \
+	r8a7745-sk-rzg1e.dtb \
+	r8a77470-iwg23s-sbc.dtb \
+	r8a7778-bockw.dtb \
+	r8a7779-marzen.dtb \
+	r8a7790-lager.dtb \
+	r8a7790-stout.dtb \
+	r8a7791-koelsch.dtb \
+	r8a7791-porter.dtb \
+	r8a7792-blanche.dtb \
+	r8a7792-wheat.dtb \
+	r8a7793-gose.dtb \
+	r8a7794-alt.dtb \
+	r8a7794-silk.dtb \
+	r9a06g032-rzn1d400-db.dtb \
+	sh73a0-kzm9g.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += \
+	rv1108-elgin-r1.dtb \
+	rv1108-evb.dtb \
+	rv1126-edgeble-neu2-io.dtb \
+	rk3036-evb.dtb \
+	rk3036-kylin.dtb \
 	rk3066a-bqcurie2.dtb \
 	rk3066a-marsboard.dtb \
+	rk3066a-mk808.dtb \
 	rk3066a-rayeager.dtb \
+	rk3128-evb.dtb \
+	rk3188-bqedison2qc.dtb \
+	rk3188-px3-evb.dtb \
 	rk3188-radxarock.dtb \
+	rk3228-evb.dtb \
+	rk3229-evb.dtb \
+	rk3229-xms6.dtb \
 	rk3288-evb-act8846.dtb \
 	rk3288-evb-rk808.dtb \
 	rk3288-firefly-beta.dtb \
-	rk3288-firefly.dtb
-dtb-$(CONFIG_ARCH_S3C24XX) += \
-	s3c2416-smdk2416.dtb
+	rk3288-firefly.dtb \
+	rk3288-firefly-reload.dtb \
+	rk3288-miqi.dtb \
+	rk3288-phycore-rdk.dtb \
+	rk3288-popmetal.dtb \
+	rk3288-r89.dtb \
+	rk3288-rock2-square.dtb \
+	rk3288-rock-pi-n8.dtb \
+	rk3288-tinker.dtb \
+	rk3288-tinker-s.dtb \
+	rk3288-veyron-brain.dtb \
+	rk3288-veyron-fievel.dtb \
+	rk3288-veyron-jaq.dtb \
+	rk3288-veyron-jerry.dtb \
+	rk3288-veyron-mickey.dtb \
+	rk3288-veyron-mighty.dtb \
+	rk3288-veyron-minnie.dtb \
+	rk3288-veyron-pinky.dtb \
+	rk3288-veyron-speedy.dtb \
+	rk3288-veyron-tiger.dtb \
+	rk3288-vyasa.dtb
 dtb-$(CONFIG_ARCH_S3C64XX) += \
 	s3c6410-mini6410.dtb \
 	s3c6410-smdk6410.dtb
 dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-aquila.dtb \
+	s5pv210-fascinate4g.dtb \
+	s5pv210-galaxys.dtb \
 	s5pv210-goni.dtb \
 	s5pv210-smdkc110.dtb \
 	s5pv210-smdkv210.dtb \
 	s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
-	r8a7740-armadillo800eva.dtb \
-	r8a7778-bockw.dtb \
-	r8a7778-bockw-reference.dtb \
-	r8a7779-marzen.dtb \
-	sh73a0-kzm9g.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
-	emev2-kzm9d.dtb \
-	r7s72100-genmai.dtb \
-	r8a73a4-ape6evm.dtb \
-	r8a7740-armadillo800eva.dtb \
-	r8a7778-bockw.dtb \
-	r8a7779-marzen.dtb \
-	r8a7790-lager.dtb \
-	r8a7791-henninger.dtb \
-	r8a7791-koelsch.dtb \
-	r8a7794-alt.dtb \
-	sh73a0-kzm9g.dtb
-dtb-$(CONFIG_ARCH_SOCFPGA) += \
+dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
+	socfpga_arria10_chameleonv3.dtb \
+	socfpga_arria10_mercury_pe1.dtb \
+	socfpga_arria10_socdk_nand.dtb \
+	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
+	socfpga_cyclone5_chameleon96.dtb \
+	socfpga_cyclone5_mcvevk.dtb \
 	socfpga_cyclone5_socdk.dtb \
+	socfpga_cyclone5_de0_nano_soc.dtb \
 	socfpga_cyclone5_sockit.dtb \
 	socfpga_cyclone5_socrates.dtb \
+	socfpga_cyclone5_sodia.dtb \
+	socfpga_cyclone5_vining_fpga.dtb \
 	socfpga_vt.dtb
 dtb-$(CONFIG_ARCH_SPEAR13XX) += \
 	spear1310-evb.dtb \
@@ -538,38 +1225,92 @@ dtb-$(CONFIG_ARCH_SPEAR6XX) += \
 dtb-$(CONFIG_ARCH_STI) += \
 	stih407-b2120.dtb \
 	stih410-b2120.dtb \
-	stih415-b2000.dtb \
-	stih415-b2020.dtb \
-	stih416-b2000.dtb \
-	stih416-b2020.dtb \
-	stih416-b2020e.dtb \
-	stih418-b2199.dtb
-dtb-$(CONFIG_ARCH_STM32)+= stm32f429-disco.dtb
+	stih410-b2260.dtb \
+	stih418-b2199.dtb \
+	stih418-b2264.dtb
+dtb-$(CONFIG_ARCH_STM32) += \
+	stm32f429-disco.dtb \
+	stm32f469-disco.dtb \
+	stm32f746-disco.dtb \
+	stm32f769-disco.dtb \
+	stm32429i-eval.dtb \
+	stm32746g-eval.dtb \
+	stm32h743i-eval.dtb \
+	stm32h743i-disco.dtb \
+	stm32h750i-art-pi.dtb \
+	stm32mp135f-dk.dtb \
+	stm32mp151a-prtt1a.dtb \
+	stm32mp151a-prtt1c.dtb \
+	stm32mp151a-prtt1s.dtb \
+	stm32mp151a-dhcor-testbench.dtb \
+	stm32mp153c-dhcom-drc02.dtb \
+	stm32mp153c-dhcor-drc-compact.dtb \
+	stm32mp157a-avenger96.dtb \
+	stm32mp157a-dhcor-avenger96.dtb \
+	stm32mp157a-dk1.dtb \
+	stm32mp157a-dk1-scmi.dtb \
+	stm32mp157a-iot-box.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0.dtb \
+	stm32mp157a-microgea-stm32mp1-microdev2.0-of7.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2.dtb \
+	stm32mp157a-icore-stm32mp1-ctouch2-of10.dtb \
+	stm32mp157a-icore-stm32mp1-edimm2.2.dtb \
+	stm32mp157a-stinger96.dtb \
+	stm32mp157c-dhcom-pdk2.dtb \
+	stm32mp157c-dhcom-picoitx.dtb \
+	stm32mp157c-dk2.dtb \
+	stm32mp157c-dk2-scmi.dtb \
+	stm32mp157c-ed1.dtb \
+	stm32mp157c-ed1-scmi.dtb \
+	stm32mp157c-emsbc-argon.dtb \
+	stm32mp157c-ev1.dtb \
+	stm32mp157c-ev1-scmi.dtb \
+	stm32mp157c-lxa-mc1.dtb \
+	stm32mp157c-odyssey.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
 	sun4i-a10-chuwi-v7-cw0825.dtb \
 	sun4i-a10-cubieboard.dtb \
+	sun4i-a10-dserve-dsrv9703c.dtb \
 	sun4i-a10-gemei-g9.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
 	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
+	sun4i-a10-itead-iteaduino-plus.dtb \
 	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
 	sun4i-a10-mk802.dtb \
 	sun4i-a10-mk802ii.dtb \
 	sun4i-a10-olinuxino-lime.dtb \
-	sun4i-a10-pcduino.dtb
+	sun4i-a10-pcduino.dtb \
+	sun4i-a10-pcduino2.dtb \
+	sun4i-a10-pov-protab2-ips9.dtb \
+	sun4i-a10-topwise-a721.dtb
 dtb-$(CONFIG_MACH_SUN5I) += \
+	sun5i-a10s-auxtek-t003.dtb \
 	sun5i-a10s-auxtek-t004.dtb \
 	sun5i-a10s-mk802.dtb \
 	sun5i-a10s-olinuxino-micro.dtb \
 	sun5i-a10s-r7-tv-dongle.dtb \
+	sun5i-a10s-wobo-i5.dtb \
+	sun5i-a13-difrnce-dit4350.dtb \
+	sun5i-a13-empire-electronix-d709.dtb \
+	sun5i-a13-empire-electronix-m712.dtb \
 	sun5i-a13-hsg-h702.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
+	sun5i-a13-licheepi-one.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
-	sun5i-a13-utoo-p66.dtb
+	sun5i-a13-pocketbook-touch-lux-3.dtb \
+	sun5i-a13-q8-tablet.dtb \
+	sun5i-a13-utoo-p66.dtb \
+	sun5i-gr8-chip-pro.dtb \
+	sun5i-gr8-evb.dtb \
+	sun5i-r8-chip.dtb
 dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-app4-evb1.dtb \
 	sun6i-a31-colombus.dtb \
@@ -577,77 +1318,182 @@ dtb-$(CONFIG_MACH_SUN6I) += \
 	sun6i-a31-i7.dtb \
 	sun6i-a31-m9.dtb \
 	sun6i-a31-mele-a1000g-quad.dtb \
-	sun6i-a31s-cs908.dtb
+	sun6i-a31s-colorfly-e708-q1.dtb \
+	sun6i-a31s-cs908.dtb \
+	sun6i-a31s-inet-q972.dtb \
+	sun6i-a31s-primo81.dtb \
+	sun6i-a31s-sina31s.dtb \
+	sun6i-a31s-sinovoip-bpi-m2.dtb \
+	sun6i-a31s-yones-toptech-bs1078-v2.dtb
 dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-bananapi.dtb \
+	sun7i-a20-bananapi-m1-plus.dtb \
 	sun7i-a20-bananapro.dtb \
 	sun7i-a20-cubieboard2.dtb \
 	sun7i-a20-cubietruck.dtb \
+	sun7i-a20-haoyu-marsboard.dtb \
 	sun7i-a20-hummingbird.dtb \
+	sun7i-a20-itead-ibox.dtb \
 	sun7i-a20-i12-tvbox.dtb \
+	sun7i-a20-icnova-swac.dtb \
+	sun7i-a20-lamobo-r1.dtb \
+	sun7i-a20-linutronix-testbox-v2.dtb \
 	sun7i-a20-m3.dtb \
 	sun7i-a20-mk808c.dtb \
+	sun7i-a20-olimex-som-evb.dtb \
+	sun7i-a20-olimex-som-evb-emmc.dtb \
+	sun7i-a20-olimex-som204-evb.dtb \
+	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
+	sun7i-a20-olinuxino-lime2-emmc.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
+	sun7i-a20-olinuxino-micro-emmc.dtb \
 	sun7i-a20-orangepi.dtb \
 	sun7i-a20-orangepi-mini.dtb \
 	sun7i-a20-pcduino3.dtb \
 	sun7i-a20-pcduino3-nano.dtb \
-	sun7i-a20-wexler-tab7200.dtb
+	sun7i-a20-wexler-tab7200.dtb \
+	sun7i-a20-wits-pro-a20-dkt.dtb
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-evb.dtb \
+	sun8i-a23-gt90h-v4.dtb \
+	sun8i-a23-inet86dz.dtb \
 	sun8i-a23-ippo-q8h-v5.dtb \
 	sun8i-a23-ippo-q8h-v1.2.dtb \
+	sun8i-a23-polaroid-mid2407pxe03.dtb \
+	sun8i-a23-polaroid-mid2809pxe04.dtb \
+	sun8i-a23-q8-tablet.dtb \
 	sun8i-a33-et-q8-v1.6.dtb \
 	sun8i-a33-ga10h-v1.1.dtb \
-	sun8i-a33-sinlinx-sina33.dtb
+	sun8i-a33-inet-d978-rev2.dtb \
+	sun8i-a33-ippo-q8h-v1.2.dtb \
+	sun8i-a33-olinuxino.dtb \
+	sun8i-a33-q8-tablet.dtb \
+	sun8i-a33-sinlinx-sina33.dtb \
+	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-bananapi-m3.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
+	sun8i-a83t-tbs-a711.dtb \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h3-bananapi-m2-plus.dtb \
+	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
+	sun8i-h3-beelink-x2.dtb \
+	sun8i-h3-libretech-all-h3-cc.dtb \
+	sun8i-h3-mapleboard-mp130.dtb \
+	sun8i-h3-nanopi-duo2.dtb \
+	sun8i-h3-nanopi-m1.dtb	\
+	sun8i-h3-nanopi-m1-plus.dtb \
+	sun8i-h3-nanopi-neo.dtb \
+	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+	sun8i-h3-orangepi-2.dtb \
+	sun8i-h3-orangepi-lite.dtb \
+	sun8i-h3-orangepi-one.dtb \
+	sun8i-h3-orangepi-pc.dtb \
+	sun8i-h3-orangepi-pc-plus.dtb \
+	sun8i-h3-orangepi-plus.dtb \
+	sun8i-h3-orangepi-plus2e.dtb \
+	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-rervision-dvk.dtb \
+	sun8i-h3-zeropi.dtb \
+	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
+	sun8i-r16-bananapi-m2m.dtb \
+	sun8i-r16-nintendo-nes-classic.dtb \
+	sun8i-r16-nintendo-super-nes-classic.dtb \
+	sun8i-r16-parrot.dtb \
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-r40-oka40i-c.dtb \
+	sun8i-s3-elimo-initium.dtb \
+	sun8i-s3-lichee-zero-plus.dtb \
+	sun8i-s3-pinecube.dtb \
+	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t3-cqa3t-bv3.dtb \
+	sun8i-v3-sl631-imx179.dtb \
+	sun8i-v3s-licheepi-zero.dtb \
+	sun8i-v3s-licheepi-zero-dock.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
+dtb-$(CONFIG_MACH_SUNIV) += \
+	suniv-f1c100s-licheepi-nano.dtb \
+	suniv-f1c200s-lctech-pi.dtb \
+	suniv-f1c200s-popstick-v1.1.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-tf101.dtb \
 	tegra20-harmony.dtb \
-	tegra20-iris-512.dtb \
+	tegra20-colibri-eval-v3.dtb \
+	tegra20-colibri-iris.dtb \
 	tegra20-medcom-wide.dtb \
 	tegra20-paz00.dtb \
 	tegra20-plutux.dtb \
 	tegra20-seaboard.dtb \
 	tegra20-tec.dtb \
 	tegra20-trimslice.dtb \
-	tegra20-ventana.dtb \
-	tegra20-whistler.dtb
+	tegra20-ventana.dtb
 dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
 	tegra30-apalis-eval.dtb \
+	tegra30-apalis-v1.1-eval.dtb \
+	tegra30-asus-nexus7-grouper-PM269.dtb \
+	tegra30-asus-nexus7-grouper-E1565.dtb \
+	tegra30-asus-nexus7-tilapia-E1565.dtb \
+	tegra30-asus-tf201.dtb \
+	tegra30-asus-tf300t.dtb \
+	tegra30-asus-tf300tg.dtb \
+	tegra30-asus-tf700t.dtb \
 	tegra30-beaver.dtb \
 	tegra30-cardhu-a02.dtb \
 	tegra30-cardhu-a04.dtb \
-	tegra30-colibri-eval-v3.dtb
+	tegra30-colibri-eval-v3.dtb \
+	tegra30-ouya.dtb \
+	tegra30-pegatron-chagall.dtb
 dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
+	tegra114-asus-tf701t.dtb \
 	tegra114-dalmore.dtb \
 	tegra114-roth.dtb \
 	tegra114-tn7.dtb
 dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
+	tegra124-apalis-eval.dtb \
+	tegra124-apalis-v1.2-eval.dtb \
 	tegra124-jetson-tk1.dtb \
 	tegra124-nyan-big.dtb \
+	tegra124-nyan-big-fhd.dtb \
 	tegra124-nyan-blaze.dtb \
 	tegra124-venice2.dtb
-dtb-$(CONFIG_ARCH_U300) += \
-	ste-u300.dtb
 dtb-$(CONFIG_ARCH_U8500) += \
 	ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
 	ste-hrefprev60-tvk.dtb \
 	ste-hrefv60plus-stuib.dtb \
 	ste-hrefv60plus-tvk.dtb \
-	ste-ccu8540.dtb \
-	ste-ccu9540.dtb
+	ste-href520-tvk.dtb \
+	ste-ux500-samsung-golden.dtb \
+	ste-ux500-samsung-janice.dtb \
+	ste-ux500-samsung-gavini.dtb \
+	ste-ux500-samsung-codina.dtb \
+	ste-ux500-samsung-codina-tmo.dtb \
+	ste-ux500-samsung-skomer.dtb \
+	ste-ux500-samsung-kyle.dtb
 dtb-$(CONFIG_ARCH_UNIPHIER) += \
-	uniphier-ph1-sld3-ref.dtb \
-	uniphier-ph1-ld4-ref.dtb \
-	uniphier-ph1-pro4-ref.dtb \
-	uniphier-ph1-sld8-ref.dtb
+	uniphier-ld4-ref.dtb \
+	uniphier-ld6b-ref.dtb \
+	uniphier-pro4-ace.dtb \
+	uniphier-pro4-ref.dtb \
+	uniphier-pro4-sanji.dtb \
+	uniphier-pro5-epcore.dtb \
+	uniphier-pro5-proex.dtb \
+	uniphier-pxs2-gentil.dtb \
+	uniphier-pxs2-vodka.dtb \
+	uniphier-sld8-ref.dtb
 dtb-$(CONFIG_ARCH_VERSATILE) += \
 	versatile-ab.dtb \
+	versatile-ab-ib2.dtb \
 	versatile-pb.dtb
 dtb-$(CONFIG_ARCH_VEXPRESS) += \
 	vexpress-v2p-ca5s.dtb \
@@ -663,33 +1509,70 @@ dtb-$(CONFIG_ARCH_VT8500) += \
 	wm8750-apc8750.dtb \
 	wm8850-w70v2.dtb
 dtb-$(CONFIG_ARCH_ZYNQ) += \
+	zynq-cc108.dtb \
+	zynq-ebaz4205.dtb \
+	zynq-microzed.dtb \
 	zynq-parallella.dtb \
 	zynq-zc702.dtb \
 	zynq-zc706.dtb \
+	zynq-zc770-xm010.dtb \
+	zynq-zc770-xm011.dtb \
+	zynq-zc770-xm012.dtb \
+	zynq-zc770-xm013.dtb \
 	zynq-zed.dtb \
-	zynq-zybo.dtb
+	zynq-zturn.dtb \
+	zynq-zturn-v5.dtb \
+	zynq-zybo.dtb \
+	zynq-zybo-z7.dtb
 dtb-$(CONFIG_MACH_ARMADA_370) += \
+	armada-370-c200-v2.dtb \
 	armada-370-db.dtb \
 	armada-370-dlink-dns327l.dtb \
 	armada-370-mirabox.dtb \
 	armada-370-netgear-rn102.dtb \
 	armada-370-netgear-rn104.dtb \
 	armada-370-rd.dtb \
+	armada-370-seagate-nas-2bay.dtb \
+	armada-370-seagate-nas-4bay.dtb \
+	armada-370-seagate-personal-cloud.dtb \
+	armada-370-seagate-personal-cloud-2bay.dtb \
 	armada-370-synology-ds213j.dtb
 dtb-$(CONFIG_MACH_ARMADA_375) += \
 	armada-375-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_38X) += \
+	armada-381-netgear-gs110emx.dtb \
+	armada-382-rd-ac3x-48g4x2xl.dtb \
+	armada-385-atl-x530.dtb\
+	armada-385-clearfog-gtr-s4.dtb \
+	armada-385-clearfog-gtr-l8.dtb \
+	armada-385-db-88f6820-amc.dtb \
 	armada-385-db-ap.dtb \
 	armada-385-linksys-caiman.dtb \
 	armada-385-linksys-cobra.dtb \
+	armada-385-linksys-rango.dtb \
+	armada-385-linksys-shelby.dtb \
+	armada-385-synology-ds116.dtb \
+	armada-385-turris-omnia.dtb \
+	armada-388-clearfog.dtb \
+	armada-388-clearfog-base.dtb \
+	armada-388-clearfog-pro.dtb \
 	armada-388-db.dtb \
 	armada-388-gp.dtb \
+	armada-388-helios4.dtb \
 	armada-388-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_39X) += \
 	armada-398-db.dtb
 dtb-$(CONFIG_MACH_ARMADA_XP) += \
 	armada-xp-axpwifiap.dtb \
+	armada-xp-crs305-1g-4s.dtb \
+	armada-xp-crs305-1g-4s-bit.dtb \
+	armada-xp-crs326-24g-2s.dtb \
+	armada-xp-crs326-24g-2s-bit.dtb \
+	armada-xp-crs328-4c-20s-4s.dtb \
+	armada-xp-crs328-4c-20s-4s-bit.dtb \
 	armada-xp-db.dtb \
+	armada-xp-db-dxbc2.dtb \
+	armada-xp-db-xc3-24g4xg.dtb \
 	armada-xp-gp.dtb \
 	armada-xp-lenovo-ix4-300d.dtb \
 	armada-xp-linksys-mamba.dtb \
@@ -705,12 +1588,85 @@ dtb-$(CONFIG_MACH_DOVE) += \
 	dove-dove-db.dtb \
 	dove-sbc-a510.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
+	mt2701-evb.dtb \
+	mt6580-evbp1.dtb \
 	mt6589-aquaris5.dtb \
+	mt6589-fairphone-fp1.dtb \
 	mt6592-evb.dtb \
+	mt7623a-rfb-emmc.dtb \
+	mt7623a-rfb-nand.dtb \
+	mt7623n-rfb-emmc.dtb \
+	mt7623n-bananapi-bpi-r2.dtb \
+	mt7629-rfb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
-dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
-endif
-
-always		:= $(dtb-y)
-clean-files	:= *.dtb
+dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
+dtb-$(CONFIG_ARCH_MSTARV7) += \
+	mstar-infinity-msc313-breadbee_crust.dtb \
+	mstar-infinity2m-ssd202d-100ask-dongshanpione.dtb \
+	mstar-infinity2m-ssd202d-miyoo-mini.dtb \
+	mstar-infinity2m-ssd202d-wirelesstag-ido-sbc2d06-v1b-22w.dtb \
+	mstar-infinity2m-ssd202d-ssd201htv2.dtb \
+	mstar-infinity2m-ssd202d-unitv2.dtb \
+	mstar-infinity3-msc313e-breadbee.dtb \
+	mstar-mercury5-ssc8336n-midrived08.dtb
+dtb-$(CONFIG_ARCH_ASPEED) += \
+	aspeed-ast2500-evb.dtb \
+	aspeed-ast2600-evb-a1.dtb \
+	aspeed-ast2600-evb.dtb \
+	aspeed-bmc-amd-daytonax.dtb \
+	aspeed-bmc-amd-ethanolx.dtb \
+	aspeed-bmc-ampere-mtjade.dtb \
+	aspeed-bmc-ampere-mtmitchell.dtb \
+	aspeed-bmc-arm-stardragon4800-rep2.dtb \
+	aspeed-bmc-asrock-e3c246d4i.dtb \
+	aspeed-bmc-asrock-romed8hm3.dtb \
+	aspeed-bmc-bytedance-g220a.dtb \
+	aspeed-bmc-delta-ahe50dc.dtb \
+	aspeed-bmc-facebook-bletchley.dtb \
+	aspeed-bmc-facebook-cloudripper.dtb \
+	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji.dtb \
+	aspeed-bmc-facebook-galaxy100.dtb \
+	aspeed-bmc-facebook-greatlakes.dtb \
+	aspeed-bmc-facebook-minipack.dtb \
+	aspeed-bmc-facebook-tiogapass.dtb \
+	aspeed-bmc-facebook-wedge40.dtb \
+	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400.dtb \
+	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
+	aspeed-bmc-ibm-bonnell.dtb \
+	aspeed-bmc-ibm-everest.dtb \
+	aspeed-bmc-ibm-rainier.dtb \
+	aspeed-bmc-ibm-rainier-1s4u.dtb \
+	aspeed-bmc-ibm-rainier-4u.dtb \
+	aspeed-bmc-intel-s2600wf.dtb \
+	aspeed-bmc-inspur-fp5280g2.dtb \
+	aspeed-bmc-inspur-nf5280m6.dtb \
+	aspeed-bmc-lenovo-hr630.dtb \
+	aspeed-bmc-lenovo-hr855xg2.dtb \
+	aspeed-bmc-microsoft-olympus.dtb \
+	aspeed-bmc-opp-lanyang.dtb \
+	aspeed-bmc-opp-mowgli.dtb \
+	aspeed-bmc-opp-nicole.dtb \
+	aspeed-bmc-opp-palmetto.dtb \
+	aspeed-bmc-opp-romulus.dtb \
+	aspeed-bmc-opp-swift.dtb \
+	aspeed-bmc-opp-tacoma.dtb \
+	aspeed-bmc-opp-vesnin.dtb \
+	aspeed-bmc-opp-witherspoon.dtb \
+	aspeed-bmc-opp-zaius.dtb \
+	aspeed-bmc-portwell-neptune.dtb \
+	aspeed-bmc-qcom-dc-scm-v1.dtb \
+	aspeed-bmc-quanta-q71l.dtb \
+	aspeed-bmc-quanta-s6q.dtb \
+	aspeed-bmc-supermicro-x11spi.dtb \
+	aspeed-bmc-inventec-transformers.dtb \
+	aspeed-bmc-tyan-s7106.dtb \
+	aspeed-bmc-tyan-s8036.dtb \
+	aspeed-bmc-ufispace-ncplite.dtb \
+	aspeed-bmc-vegman-n110.dtb \
+	aspeed-bmc-vegman-rx20.dtb \
+	aspeed-bmc-vegman-sx20.dtb
diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts
index d9c50fbb49d2..742fcf525e1b 100644
--- a/arch/arm/boot/dts/aks-cdu.dts
+++ b/arch/arm/boot/dts/aks-cdu.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * aks-cdu.dts - Device Tree file for AK signal CDU
  *
  * Copyright (C) 2012 AK signal Brno a.s.
  *               2012 Jiri Prchal <jiri.prchal@aksignal.cz>
- *
- * Licensed under GPLv2 or later.
  */
 
 /dts-v1/;
@@ -57,37 +56,41 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
-			status = "okay";
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			uboot@40000 {
-				label = "uboot";
-				reg = <0x40000 0x80000>;
-			};
-			ubootenv@c0000 {
-				label = "ubootenv";
-				reg = <0xc0000 0x40000>;
-			};
-			kernel@100000 {
-				label = "kernel";
-				reg = <0x100000 0x400000>;
-			};
-			rootfs@500000 {
-				label = "rootfs";
-				reg = <0x500000 0x7b00000>;
+		ebi: ebi@10000000 {
+			nand_controller: nand-controller {
+				nand: nand@3 {
+					partitions {
+						bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "uboot";
+							reg = <0x40000 0x80000>;
+						};
+
+						ubootenv@c0000 {
+							label = "ubootenv";
+							reg = <0xc0000 0x40000>;
+						};
+
+						kernel@100000 {
+							label = "kernel";
+							reg = <0x100000 0x400000>;
+						};
+
+						rootfs@500000 {
+							label = "rootfs";
+							reg = <0x500000 0x7b00000>;
+						};
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/alphascale-asm9260.dtsi b/arch/arm/boot/dts/alphascale-asm9260.dtsi
index 907fc7bfc418..2ce6038536fd 100644
--- a/arch/arm/boot/dts/alphascale-asm9260.dtsi
+++ b/arch/arm/boot/dts/alphascale-asm9260.dtsi
@@ -4,10 +4,11 @@
  * Licensed under the X11 license or the GPL v2 (or later)
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/alphascale,asm9260.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&icoll>;
 
 	memory {
diff --git a/arch/arm/boot/dts/alpine.dtsi b/arch/arm/boot/dts/alpine.dtsi
index 9af2d60e9a7f..ff68dfb4eb78 100644
--- a/arch/arm/boot/dts/alpine.dtsi
+++ b/arch/arm/boot/dts/alpine.dtsi
@@ -25,12 +25,18 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton64.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	/* SOC compatibility */
 	compatible = "al,alpine";
 
+	memory {
+		device_type = "memory";
+		reg = <0 0 0 0>;
+	};
+
 	/* CPU Configuration */
 	cpus {
 		#address-cells = <1>;
@@ -41,28 +47,28 @@
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <0>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 
 		cpu@1 {
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <1>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 
 		cpu@2 {
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <2>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 
 		cpu@3 {
 			compatible = "arm,cortex-a15";
 			device_type = "cpu";
 			reg = <3>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <1700000000>;
 		};
 	};
 
@@ -81,11 +87,11 @@
 				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
 				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <50000000>;
 		};
 
 		/* Interrupt Controller */
-		gic: gic@fb001000 {
+		gic: interrupt-controller@fb001000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
 			#size-cells = <0>;
@@ -93,7 +99,7 @@
 			interrupt-controller;
 			reg = <0x0 0xfb001000 0x0 0x1000>,
 			      <0x0 0xfb002000 0x0 0x2000>,
-			      <0x0 0xfb004000 0x0 0x1000>,
+			      <0x0 0xfb004000 0x0 0x2000>,
 			      <0x0 0xfb006000 0x0 0x2000>;
 			interrupts =
 				<GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
@@ -120,26 +126,26 @@
 				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart0:uart@fd883000 {
+		uart0: serial@fd883000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd883000 0x0 0x1000>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <375000000>;
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 		};
 
-		uart1:uart@0xfd884000 {
+		uart1: serial@fd884000 {
 			compatible = "ns16550a";
 			reg = <0x0 0xfd884000 0x0 0x1000>;
-			clock-frequency = <0>; /* Filled by loader */
+			clock-frequency = <375000000>;
 			interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 		};
 
 		/* Internal PCIe Controller */
-		pcie-internal@0xfbc00000 {
+		pcie@fbc00000 {
 			compatible = "pci-host-ecam-generic";
 			device_type = "pci";
 			#size-cells = <2>;
@@ -148,13 +154,23 @@
 			reg = <0x0 0xfbc00000 0x0 0x100000>;
 			interrupt-map-mask = <0xf800 0 0 7>;
 			/* Add legacy interrupts for SATA devices only */
-			interrupt-map =	<0x4000 0 0 1 &gic 0 43 4>,
+			interrupt-map = <0x4000 0 0 1 &gic 0 43 4>,
 					<0x4800 0 0 1 &gic 0 44 4>;
 
 			/* 32 bit non prefetchable memory space */
 			ranges = <0x02000000 0x0 0xfe000000 0x0 0xfe000000 0x0 0x1000000>;
 
 			bus-range = <0x00 0x00>;
+			msi-parent = <&msix>;
+		};
+
+		msix: msix@fbe00000 {
+			compatible = "al,alpine-msix";
+			reg = <0x0 0xfbe00000 0x0 0x100000>;
+			interrupt-controller;
+			msi-controller;
+			al,msi-base-spi = <96>;
+			al,msi-num-spis = <64>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-baltos-ir2110.dts b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
new file mode 100644
index 000000000000..75992eec830f
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir2110.dts
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 2110";
+};
+
+&am33xx_pinmux {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir3220.dts b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
new file mode 100644
index 000000000000..087e084506d2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-ir3220.dts
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "OnRISC Baltos iR 3220";
+};
+
+&am33xx_pinmux {
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-baltos-ir5221.dts b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
index 7d36601697da..faeb39aab60a 100644
--- a/arch/arm/boot/dts/am335x-baltos-ir5221.dts
+++ b/arch/arm/boot/dts/am335x-baltos-ir5221.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
@@ -13,276 +10,63 @@
 
 /dts-v1/;
 
-#include "am33xx.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
 
 / {
 	model = "OnRISC Baltos iR 5221";
-	compatible = "vscom,onrisc", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>; /* 256 MB */
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	wl12xx_vmmc: fixedregulator@2 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&wl12xx_gpio>;
-		compatible = "regulator-fixed";
-		regulator-name = "vwl1271";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpio3 8 0>;
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
 };
 
 &am33xx_pinmux {
-	mmc2_pins: pinmux_mmc2_pins {
-		pinctrl-single,pins = <
-			0x020 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
-			0x024 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
-			0x028 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
-			0x02c (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
-			0x080 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
-			0x084 (PIN_INPUT_PULLUP | MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
-			0x1e4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* emu0.gpio3[7] */
-		>;
-	};
-
-	wl12xx_gpio: pinmux_wl12xx_gpio {
-		pinctrl-single,pins = <
-			0x1e8 (PIN_OUTPUT_PULLUP | MUX_MODE7)      /* emu1.gpio3[8] */
-		>;
-	};
-
-	tps65910_pins: pinmux_tps65910_pins {
-		pinctrl-single,pins = <
-			0x078 (PIN_INPUT_PULLUP | MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
-		>;
-	};
-
 	tca6416_pins: pinmux_tca6416_pins {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)      /* xdma_event_intr1.gpio0[20] tca6416 stuff */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x158 0x2a      /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */
-			0x15c 0x2a      /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */
-		>;
-	};
 
 	dcan1_pins: pinmux_dcan1_pins {
 		pinctrl-single,pins = <
-			0x168 0x0a      /* uart0_ctsn.dcan1_tx_mux0, OUTPUT | MODE2 */
-			0x16c 0x2a      /* uart0_rtsn.dcan1_rx_mux0, INPUT | MODE2 */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)      /* uart0_ctsn.dcan1_tx_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)      /* uart0_rtsn.dcan1_rx_mux0 */
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x180 0x28      /* uart1_rxd, INPUT | MODE0 */
-			0x184 0x28      /* uart1_txd, INPUT | MODE0 */
-			/*0x178 0x28*/      /* uart1_ctsn, INPUT | MODE0 */
-			/*0x17c 0x08*/      /* uart1_rtsn, OUTPUT | MODE0 */
-			0x178 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* uart1_ctsn, INPUT | MODE0 */
-			0x17c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* uart1_rtsn, OUTPUT | MODE0 */
-			0x0e0 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
-			0x0e4 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
-			0x0e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
-			0x0ec (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* lcd_vsync.gpio2[22] DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_hsync.gpio2[23] DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_pclk.gpio2[24] DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* lcd_ac_bias_en.gpio2[25] RI */
 		>;
 	};
 
 	uart2_pins: pinmux_uart2_pins {
 		pinctrl-single,pins = <
-			0x150 0x29      /* spi0_sclk.uart2_rxd_mux3, INPUT | MODE1 */
-			0x154 0x09      /* spi0_d0.uart2_txd_mux3, OUTPUT | MODE1 */
-			/*0x188 0x2a*/      /* i2c0_sda.uart2_ctsn_mux0, INPUT | MODE2 */
-			/*0x18c 0x2a*/      /* i2c0_scl.uart2_rtsn_mux0, INPUT | MODE2 */
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* i2c0_sda.uart2_ctsn_mux0 */
-			0x18c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* i2c0_scl.uart2_rtsn_mux0 */
-			0x030 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
-			0x034 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
-			0x038 (PIN_INPUT_PULLDOWN | MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
-			0x03c (PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
-
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
-
-
-			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-
-			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)      /* spi0_sclk.uart2_rxd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      /* spi0_d0.uart2_txd_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)      /* i2c0_sda.uart2_ctsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)      /* i2c0_scl.uart2_rtsn_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad12.gpio1[12] DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad13.gpio1[13] DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)      /* gpmc_ad14.gpio1[14] DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)     /* gpmc_ad15.gpio1[15] RI */
+
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)      /* mcasp0_aclkr.gpio3[18], INPUT_PULLDOWN | MODE7 */
 		>;
 	};
 
-	nandflash_pins_s0: nandflash_pins_s0 {
+	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE7)     /* MMC1 CD */
 		>;
 	};
 };
 
-&elm {
-	status = "okay";
-};
-
-&gpmc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
-	status = "okay";
-
-	nand@0,0 {
-		reg = <0 0 0>; /* CS0, offset 0 */
-		nand-bus-width = <8>;
-		ti,nand-ecc-opt = "bch8";
-		ti,nand-xfer-type = "polled";
-
-		gpmc,device-nand = "true";
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-		elm_id = <&elm>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart1_pins>;
@@ -290,8 +74,6 @@
 	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
 	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-	rts-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
 
 	status = "okay";
 };
@@ -303,55 +85,27 @@
 	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
 	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
 	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
-	rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
 
 	status = "okay";
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@2d {
-		reg = <0x2d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 GPIO_ACTIVE_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65910_pins>;
-	};
-
-	at24@50 {
-		compatible = "at24,24c02";
-		pagesize = <8>;
-		reg = <0x50>;
-	};
-
 	tca6416: gpio@20 {
 		compatible = "ti,tca6416";
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <20 GPIO_ACTIVE_LOW>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "ModeA0", "ModeA1", "ModeA2", "ModeA3",
+				  "ModeB0", "ModeB1", "ModeB2", "ModeB3";
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
 &usb0_phy {
 	status = "okay";
 };
@@ -367,166 +121,177 @@
 
 &usb1 {
 	status = "okay";
-	dr_mode = "otg";
-};
-
-&cppi41dma  {
-	status = "okay";
+	dr_mode = "host";
 };
 
-#include "tps65910.dtsi"
-
-&tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
-
-	ti,en-ck32k-xtal = <1>;
-
-	regulators {
-		vrtc_reg: regulator@0 {
-			regulator-always-on;
-		};
-
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd2_reg: regulator@3 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
-			regulator-always-on;
-		};
-
-		vaux2_reg: regulator@10 {
-			regulator-always-on;
-		};
-
-		vaux33_reg: regulator@11 {
-			regulator-always-on;
-		};
-
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
 	};
 };
 
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
-
-	status = "okay";
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
 };
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
 
 	status = "okay";
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <7>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
-};
-
-&phy_sel {
-	rmii-clock-ext = <1>;
-};
-
 &mmc1 {
-	vmmc-supply = <&vmmc_reg>;
-	status = "okay";
-};
-
-&mmc2 {
-	status = "okay";
-	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
-	bus-width = <4>;
-	cap-power-off-card;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_pins>;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@2 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
-	};
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
 };
 
-&sham {
-	status = "okay";
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"WLAN_BTN",
+		"W_DISABLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"TCA6416_INT",
+		"RMII1_TXD1",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"RMII1_TXD0",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
 };
 
-&aes {
-	status = "okay";
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
 };
 
-&gpio0 {
-	ti,no-reset-on-init;
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SD_CD",
+		"SD_WP",
+		"RMII1_RXD1",
+		"RMII1_RXD0",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
 };
 
-&dcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins>;
-
-	status = "okay";
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"RMII1_CRS_DV",
+		"RMII1_RXER",
+		"RMII1_TXEN",
+		"3G_PWR_EN",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"USB1_DRVVBUS",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
 };
diff --git a/arch/arm/boot/dts/am335x-baltos-leds.dtsi b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
new file mode 100644
index 000000000000..025014657d12
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos-leds.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/*#include "am33xx.dtsi"*/
+
+/ {
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "onrisc:red:power";
+			linux,default-trigger = "default-on";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+		led-wlan {
+			label = "onrisc:blue:wlan";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-app {
+			label = "onrisc:green:app";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: pinmux_user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 PWR LED */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_txd3.gpio0_16 WLAN LED */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mii1_txd2.gpio0_17 APP LED */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-baltos.dtsi b/arch/arm/boot/dts/am335x-baltos.dtsi
new file mode 100644
index 000000000000..6161c8929a78
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-baltos.dtsi
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "vscom,onrisc", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	wl12xx_vmmc: fixedregulator2 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_gpio>;
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 8 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad8.mmc1_dat0_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad9.mmc1_dat1_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad10.mmc1_dat2_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_ad11.mmc1_dat3_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_csn1.mmc1_clk_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)      /* gpmc_csn2.mmc1_cmd_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLUP, MUX_MODE7)      /* emu0.gpio3[7] */
+		>;
+	};
+
+	wl12xx_gpio: pinmux_wl12xx_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT_PULLUP, MUX_MODE7)      /* emu1.gpio3[8] */
+		>;
+	};
+
+	tps65910_pins: pinmux_tps65910_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE7)      /* gpmc_ben1.gpio1[28] */
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE2)      /* spi0_d1.i2c1_sda_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE2)      /* spi0_cs0.i2c1_scl_mux3 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)       /* mii1_crs.rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_tx_en.rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_txd1.rmii1_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)      /* mii1_txd0.rmii1_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)      /* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)      /* rmii1_ref_clk.rmii1_refclk */
+
+
+			/* Slave 2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+			/* Slave 2 reset value*/
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)	/* mdio_data.mdio_data */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins_s0: nandflash_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins_s0>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		ti,nand-xfer-type = "prefetch-dma";
+
+		gpmc,device-nand = "true";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,elm-id = <&elm>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps65910_pins>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c02";
+		pagesize = <8>;
+		reg = <0x50>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	ti,en-ck32k-xtal = <1>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	phy1: ethernet-phy@1 {
+		reg = <7>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmc_reg>;
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&wl12xx_vmmc>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0_target {
+	ti,no-reset-on-init;
+};
+
+&gpio3_target {
+	ti,no-reset-on-init;
+};
diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index 72a9b3fc4251..89c00ce42c26 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION
  *
  * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include "am335x-igep0033.dtsi"
@@ -29,13 +26,13 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "base:red:user";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "base:green:user";
 			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
 			default-state = "off";
@@ -46,39 +43,39 @@
 &am33xx_pinmux {
 	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
 	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3)	/* xdma_event_intr0.clkout1 */
 		>;
 	};
 
 	leds_base_pins: pinmux_leds_base_pins {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
 		>;
 	};
 };
@@ -89,7 +86,7 @@
 
 &i2c0 {
 	eeprom: eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
index fec78349c1f3..02e04a12a270 100644
--- a/arch/arm/boot/dts/am335x-bone-common.dtsi
+++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 / {
@@ -13,39 +10,43 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
 
 		compatible = "gpio-leds";
 
-		led@2 {
+		led2 {
 			label = "beaglebone:green:heartbeat";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "beaglebone:green:mmc0";
 			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "beaglebone:green:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@5 {
+		led5 {
 			label = "beaglebone:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc1";
@@ -53,7 +54,7 @@
 		};
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
@@ -67,112 +68,118 @@
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spio0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 };
@@ -184,36 +191,16 @@
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "peripheral";
+	interrupts-extended = <&intc 18 &tps 0>;
+	interrupt-names = "mc", "vbus";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -226,7 +213,7 @@
 	};
 
 	baseboard_eeprom: baseboard_eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x50>;
 
 		#address-cells = <1>;
@@ -245,7 +232,7 @@
 	clock-frequency = <100000>;
 
 	cape_eeprom0: cape_eeprom0@54 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x54>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -255,7 +242,7 @@
 	};
 
 	cape_eeprom1: cape_eeprom1@55 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x55>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -265,7 +252,7 @@
 	};
 
 	cape_eeprom2: cape_eeprom2@56 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x56>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -275,7 +262,7 @@
 	};
 
 	cape_eeprom3: cape_eeprom3@57 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x57>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -306,8 +293,20 @@
 	 * by the hardware problems. (Tip: double-check by performing a current
 	 * measurement after shutdown: it should be less than 1 mA.)
 	 */
+
+	interrupts = <7>; /* NMI */
+	interrupt-parent = <&intc>;
+
 	ti,pmic-shutdown-controller;
 
+	charger {
+		status = "okay";
+	};
+
+	pwrbutton {
+		status = "okay";
+	};
+
 	regulators {
 		dcdc1_reg: regulator@0 {
 			regulator-name = "vdds_dpr";
@@ -318,7 +317,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -354,28 +353,31 @@
 	};
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
+&cpsw_port2 {
+	status = "disabled";
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &mmc1 {
@@ -383,8 +385,7 @@
 	bus-width = <0x4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
-	cd-inverted;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &aes {
@@ -394,3 +395,17 @@
 &sham {
 	status = "okay";
 };
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+	system-power-controller;
+};
+
+&pruss_tm {
+	status = "okay";
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-bone-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 6b8493720424..b5d85ef51a02 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/am335x-boneblack-common.dtsi b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
new file mode 100644
index 000000000000..a7a8c61ef9b2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-common.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+	non-removable;
+};
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
new file mode 100644
index 000000000000..486f24deb875
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-hdmi.dtsi
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&am33xx_pinmux {
+	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 */
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		nxp,calib-gpios = <&gpio1 25 0>;
+		interrupts-extended = <&gpio1 25 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
+					remote-endpoint = <&lcdc_0>;
+				};
+			};
+		};
+	};
+};
+
+&mcasp0	{
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk_mcasp0_fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk_mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack-wireless.dts b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
new file mode 100644
index 000000000000..207d2b63e0eb
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblack-wireless.dts
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x BeagleBone Black Wireless";
+	compatible = "ti,am335x-bone-black-wireless", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_txd0.gpio0_28 - BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (L15) gmii1_rxd1.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6 ) /* (J16) gmii1_txen.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J17) gmii1_rxdv.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (J18) gmii1_txd3.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (K15) gmii1_txd2.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5 ) /* (H16) gmii1_col.mmc2_dat3 */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gmii1_txclk.gpio3_9 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk.gpio0_29 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gmii1_rxclk.gpio3_10 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac_sw {
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio3 {
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts
index 5c42d259fa68..b956e2f60fe0 100644
--- a/arch/arm/boot/dts/am335x-boneblack.dts
+++ b/arch/arm/boot/dts/am335x-boneblack.dts
@@ -1,86 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
 #include "am33xx.dtsi"
 #include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
 
 / {
 	model = "TI AM335x BeagleBone Black";
 	compatible = "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
 };
 
-&ldo3_reg {
-	regulator-min-microvolt = <1800000>;
-	regulator-max-microvolt = <1800000>;
-	regulator-always-on;
+&cpu0_opp_table {
+	/*
+	 * All PG 2.0 silicon may not support 1GHz but some of the early
+	 * BeagleBone Blacks have PG 2.0 silicon which is guaranteed
+	 * to support 1GHz OPP so enable it for PG 2.0 on this board.
+	 */
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
 };
 
-&mmc1 {
-	vmmc-supply = <&vmmcsd_fixed>;
+&gpio0 {
+	gpio-line-names =
+		"[mdio_data]",
+		"[mdio_clk]",
+		"P9_22 [spi0_sclk]",
+		"P9_21 [spi0_d0]",
+		"P9_18 [spi0_d1]",
+		"P9_17 [spi0_cs0]",
+		"[mmc0_cd]",
+		"P8_42A [ecappwm0]",
+		"P8_35 [lcd d12]",
+		"P8_33 [lcd d13]",
+		"P8_31 [lcd d14]",
+		"P8_32 [lcd d15]",
+		"P9_20 [i2c2_sda]",
+		"P9_19 [i2c2_scl]",
+		"P9_26 [uart1_rxd]",
+		"P9_24 [uart1_txd]",
+		"[rmii1_txd3]",
+		"[rmii1_txd2]",
+		"[usb0_drvvbus]",
+		"[hdmi cec]",
+		"P9_41B",
+		"[rmii1_txd1]",
+		"P8_19 [ehrpwm2a]",
+		"P8_13 [ehrpwm2b]",
+		"NC",
+		"NC",
+		"P8_14",
+		"P8_17",
+		"[rmii1_txd0]",
+		"[rmii1_refclk]",
+		"P9_11 [uart4_rxd]",
+		"P9_13 [uart4_txd]";
 };
 
-&mmc2 {
-	vmmc-supply = <&vmmcsd_fixed>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&emmc_pins>;
-	bus-width = <8>;
-	status = "okay";
+&gpio1 {
+	gpio-line-names =
+		"P8_25 [mmc1_dat0]",
+		"[mmc1_dat1]",
+		"P8_5 [mmc1_dat2]",
+		"P8_6 [mmc1_dat3]",
+		"P8_23 [mmc1_dat4]",
+		"P8_22 [mmc1_dat5]",
+		"P8_3 [mmc1_dat6]",
+		"P8_4 [mmc1_dat7]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"P8_12",
+		"P8_11",
+		"P8_16",
+		"P8_15",
+		"P9_15A",
+		"P9_23",
+		"P9_14 [ehrpwm1a]",
+		"P9_16 [ehrpwm1b]",
+		"[emmc rst]",
+		"[usr0 led]",
+		"[usr1 led]",
+		"[usr2 led]",
+		"[usr3 led]",
+		"[hdmi irq]",
+		"[usb vbus oc]",
+		"[hdmi audio]",
+		"P9_12",
+		"P8_26",
+		"P8_21 [emmc]",
+		"P8_20 [emmc]";
 };
 
-&am33xx_pinmux {
-	nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-			0xa0 0x08       /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa4 0x08       /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xa8 0x08       /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xac 0x08       /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb0 0x08       /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb4 0x08       /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xb8 0x08       /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xbc 0x08       /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc0 0x08       /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc4 0x08       /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xc8 0x08       /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xcc 0x08       /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd0 0x08       /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd4 0x08       /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xd8 0x08       /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xdc 0x08       /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */
-			0xe0 0x00       /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe4 0x00       /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xe8 0x00       /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-			0xec 0x00       /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */
-		>;
-	};
-	nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins {
-		pinctrl-single,pins = <
-			0x1b0 0x03      /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */
-		>;
-	};
+&gpio2 {
+	gpio-line-names =
+		"P9_15B",
+		"P8_18",
+		"P8_7",
+		"P8_8",
+		"P8_10",
+		"P8_9",
+		"P8_45 [hdmi]",
+		"P8_46 [hdmi]",
+		"P8_43 [hdmi]",
+		"P8_44 [hdmi]",
+		"P8_41 [hdmi]",
+		"P8_42 [hdmi]",
+		"P8_39 [hdmi]",
+		"P8_40 [hdmi]",
+		"P8_37 [hdmi]",
+		"P8_38 [hdmi]",
+		"P8_36 [hdmi]",
+		"P8_34 [hdmi]",
+		"[rmii1_rxd3]",
+		"[rmii1_rxd2]",
+		"[rmii1_rxd1]",
+		"[rmii1_rxd0]",
+		"P8_27 [hdmi]",
+		"P8_29 [hdmi]",
+		"P8_28 [hdmi]",
+		"P8_30 [hdmi]",
+		"[mmc0_dat3]",
+		"[mmc0_dat2]",
+		"[mmc0_dat1]",
+		"[mmc0_dat0]",
+		"[mmc0_clk]",
+		"[mmc0_cmd]";
 };
 
-&lcdc {
-	status = "okay";
-};
-
-/ {
-	hdmi {
-		compatible = "ti,tilcdc,slave";
-		i2c = <&i2c0>;
-		pinctrl-names = "default", "off";
-		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
-		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
-		status = "okay";
-	};
+&gpio3 {
+	gpio-line-names =
+		"[mii col]",
+		"[mii crs]",
+		"[mii rx err]",
+		"[mii tx en]",
+		"[mii rx dv]",
+		"[i2c0 sda]",
+		"[i2c0 scl]",
+		"[jtag emu0]",
+		"[jtag emu1]",
+		"[mii tx clk]",
+		"[mii rx clk]",
+		"NC",
+		"NC",
+		"[usb vbus en]",
+		"P9_31 [spi1_sclk]",
+		"P9_29 [spi1_d0]",
+		"P9_30 [spi1_d1]",
+		"P9_28 [spi1_cs0]",
+		"P9_42B [ecappwm0]",
+		"P9_27",
+		"P9_41A",
+		"P9_25",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
 };
 
-&rtc {
-	system-power-controller;
+&baseboard_eeprom {
+	vcc-supply = <&ldo4_reg>;
 };
diff --git a/arch/arm/boot/dts/am335x-boneblue.dts b/arch/arm/boot/dts/am335x-boneblue.dts
new file mode 100644
index 000000000000..34579e98636e
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-boneblue.dts
@@ -0,0 +1,616 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x BeagleBone Blue";
+	compatible = "ti,am335x-bone-blue", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		usr_0_led {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		usr_1_led {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		usr_2_led {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		usr_3_led {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		wifi_led {
+			label = "wifi";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "phy0assoc";
+		};
+
+		red_led {
+			label = "red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_1_led {
+			label = "bat25";
+			gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_2_led {
+			label = "bat50";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_3_led {
+			label = "bat75";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		batt_4_led {
+			label = "bat100";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] - WIFI_LED */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7) /* (R7) gpmc_advn_ale.gpio2[2] - P8.7, LED_RED, GP1_PIN_5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE7) /* (T7) gpmc_oen_ren.gpio2[3] - P8.8, LED_GREEN, GP1_PIN_6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7) /* (U12) gpmc_ad11.gpio0[27] - P8.17, BATT_LED_1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7) /* (T5) lcd_data15.gpio0[11] - P8.32, BATT_LED_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE7) /* (V6) gpmc_csn0.gpio1[29] - P8.26, BATT_LED_3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7) /* (T11) gpmc_ad10.gpio0[26] - P8.14, BATT_LED_4 */
+
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
+		>;
+	};
+
+	/* UT0 */
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	/* UT1 */
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	/* GPS */
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* (A17) spi0_sclk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (B17) spi0_d0.uart2_txd */
+		>;
+	};
+
+	/* DSM2 */
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+		>;
+	};
+
+	/* UT5 */
+	uart5_pins: pinmux_uart5_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)	/* (U2) lcd_data9.uart5_rxd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT_PULLDOWN, MUX_MODE4)	/* (U1) lcd_data8.uart5_txd */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* (U9) gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* (V9) gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U7) gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V7) gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R8) gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T8) gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* (U8) gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* (V8) gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* (R9) gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* (T9) gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE6)	/* (L15) gmii1_rxd1.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLUP, MUX_MODE6)	/* (J16) gmii1_txen.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J17) gmii1_rxdv.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLUP, MUX_MODE5)	/* (J18) gmii1_txd3.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLUP, MUX_MODE5)	/* (K15) gmii1_txd2.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE5)	/* (H16) gmii1_col.mmc2_dat3 */
+		>;
+	};
+
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (K17) gmii1_txd0.gpio0[28] - BT_EN */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* (L17) gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (L16) gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* (M17) mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* (M18) mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* (K18) gmii1_txclk.gpio3[9] - WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* (K16) gmii1_txd1.gpio0[21] - WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* (L18) gmii1_rxclk.gpio3[10] - LS_BUF_EN */
+		>;
+	};
+
+	/* DCAN */
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)		/* (E17) uart0_rtsn.dcan1_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)		/* (E18) uart0_ctsn.dcan1_tx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_OUTPUT, MUX_MODE7)		/* (M16) gmii1_rxd0.gpio2[21] */
+		>;
+	};
+
+	/* E1 */
+	eqep0_pins: pinmux_eqep0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT, MUX_MODE1)		/* (B12) mcasp0_aclkr.eQEP0A_in */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_INPUT, MUX_MODE1)		/* (C13) mcasp0_fsr.eQEP0B_in */
+		>;
+	};
+
+	/* E2 */
+	eqep1_pins: pinmux_eqep1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT, MUX_MODE2)		/* (V2) lcd_data12.eQEP1A_in */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_INPUT, MUX_MODE2)		/* (V3) lcd_data13.eQEP1B_in */
+		>;
+	};
+
+	/* E3 */
+	eqep2_pins: pinmux_eqep2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE4)		/* (T12) gpmc_ad12.eQEP2A_in */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE4)		/* (R12) gpmc_ad13.eQEP2B_in */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart5_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	interrupts-extended = <&intc 18 &tps 0>;
+	interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&i2c0 {
+	baseboard_eeprom: baseboard_eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		baseboard_data: baseboard_data@0 {
+			reg = <0 0x100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mpu9250@68 {
+		compatible = "invensense,mpu9250";
+		reg = <0x68>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ax8975@c {
+				compatible = "asahi-kasei,ak8975";
+				reg = <0x0c>;
+			};
+		};
+	};
+
+	pressure@76 {
+		compatible = "bosch,bmp280";
+		reg = <0x76>;
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	/delete-property/ ti,pmic-shutdown-controller;
+
+	charger {
+		interrupts = <0>, <1>;
+		interrupt-names = "USB", "AC";
+		status = "okay";
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&rtc {
+	system-power-controller;
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		"UART3_CTS", /* M17 */
+		"UART3_RTS", /* M18 */
+		"UART2_RX", /* A17 */
+		"UART2_TX", /* B17 */
+		"I2C1_SDA", /* B16 */
+		"I2C1_SCL", /* A16 */
+		"MMC0_CD", /* C15 */
+		"SPI1_SS2", /* C18 */
+		"EQEP_1A", /* V2 */
+		"EQEP_1B", /* V3 */
+		"MDIR_2B", /* V4 */
+		"BATT_LED_2", /* T5 */
+		"I2C2_SDA", /* D18 */
+		"I2C2_SCL", /* D17 */
+		"UART1_RX", /* D16 */
+		"UART1_TX", /* D15 */
+		"MMC2_DAT1", /* J18 */
+		"MMC2_DAT2", /* K15 */
+		"NC", /* F16 */
+		"WIFI_LED", /* A15 */
+		"MOT_STBY", /* D14 */
+		"WLAN_IRQ", /* K16 */
+		"PWM_2A", /* U10 */
+		"PWM_2B", /* T10 */
+		"",
+		"",
+		"BATT_LED_4", /* T11 */
+		"BATT_LED_1", /* U12 */
+		"BT_EN", /* K17 */
+		"SPI1_SS1", /* H18 */
+		"UART4_RX", /* T17 */
+		"MDIR_1B"; /* U17 */
+};
+
+&gpio1 {
+	gpio-line-names =
+		"MMC1_DAT0", /* U7 */
+		"MMC1_DAT1", /* V7 */
+		"MMC1_DAT2", /* R8 */
+		"MMC1_DAT3", /* T8 */
+		"MMC1_DAT4", /* U8 */
+		"MMC1_DAT5", /* V8 */
+		"MMC1_DAT6", /* R9 */
+		"MMC1_DAT7", /* T9 */
+		"DCAN1_TX", /* E18 */
+		"DCAN1_RX", /* E17 */
+		"UART0_RX", /* E15 */
+		"UART0_TX", /* E16 */
+		"EQEP_2A", /* T12 */
+		"EQEP_2B", /* R12 */
+		"PRU_E_A", /* V13 */
+		"PRU_E_B", /* U13 */
+		"MDIR_2A", /* R13 */
+		"GPIO1_17", /* V14 */
+		"PWM_1A", /* U14 */
+		"PWM_1B", /* T14 */
+		"EMMC_RST", /* R14 */
+		"USR_LED_0", /* V15 */
+		"USR_LED_1", /* U15 */
+		"USR_LED_2", /* T15 */
+		"USR_LED_3", /* V16 */
+		"GPIO1_25", /* U16 */
+		"MCASP0_AXR0", /* T16 */
+		"MCASP0_AXR1", /* V17 */
+		"MCASP0_ACLKR", /* U18 */
+		"BATT_LED_3", /* V6 */
+		"MMC1_CLK", /* U9 */
+		"MMC1_CMD"; /* V9 */
+};
+
+&gpio2 {
+	gpio-line-names =
+		"MDIR_1A", /* T13 */
+		"MCASP0_FSR", /* V12 */
+		"LED_RED", /* R7 */
+		"LED_GREEN", /* T7 */
+		"MODE_BTN", /* U6 */
+		"PAUSE_BTN", /* T6 */
+		"MDIR_4A", /* R1 */
+		"MDIR_4B", /* R2 */
+		"MDIR_3B", /* R3 */
+		"MDIR_3A", /* R4 */
+		"SVO7", /* T1 */
+		"SVO8", /* T2 */
+		"SVO5", /* T3 */
+		"SVO6", /* T4 */
+		"UART5_TX", /* U1 */
+		"UART5_RX", /* U2 */
+		"SERVO_EN", /* U3 */
+		"NC", /* U4 */
+		"UART3_RX", /* L17 */
+		"UART3_TX", /* L16 */
+		"MMC2_CLK", /* L15 */
+		"DCAN1_SILENT", /* M16 */
+		"SVO1", /* U5 */
+		"SVO3", /* R5 */
+		"SVO2", /* V5 */
+		"SVO4", /* R6 */
+		"MMC0_DAT3", /* F17 */
+		"MMC0_DAT2", /* F18 */
+		"MMC0_DAT1", /* G15 */
+		"MMC0_DAT0", /* G16 */
+		"MMC0_CLK", /* G17 */
+		"MMC0_CMD"; /* G18 */
+};
+
+&gpio3 {
+	gpio-line-names =
+		"MMC2_DAT3", /* H16 */
+		"GPIO3_1", /* H17 */
+		"GPIO3_2", /* J15 */
+		"MMC2_CMD", /* J16 */
+		"MMC2_DAT0", /* J17 */
+		"I2C0_SDA", /* C17 */
+		"I2C0_SCL", /* C16 */
+		"EMU1", /* C14 */
+		"EMU0", /* B14 */
+		"WL_EN", /* K18 */
+		"WL_BT_OE", /* L18 */
+		"",
+		"",
+		"NC", /* F15 */
+		"SPI1_SCK", /* A13 */
+		"SPI1_MISO", /* B13 */
+		"SPI1_MOSI", /* D12 */
+		"GPIO3_17", /* C12 */
+		"EQEP_0A", /* B12 */
+		"EQEP_0B", /* C13 */
+		"GPIO3_20", /* D13 */
+		"IMU_INT", /* A14 */
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&eqep0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep0_pins>;
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&eqep1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep1_pins>;
+	status = "okay";
+};
+
+&epwmss2 {
+	status = "okay";
+};
+
+&eqep2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqep2_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-common.dtsi b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
new file mode 100644
index 000000000000..9f7fb63744d0
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen-common.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc1 {
+	vmmc-supply = <&vmmcsd_fixed>;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&am33xx_pinmux {
+	uart2_pins: uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)	/* spi0_sclk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)	/* spi0_d0.uart2_txd */
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen-wireless.dts b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
new file mode 100644
index 000000000000..d388cffa1a4d
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen-wireless.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "TI AM335x BeagleBone Green Wireless";
+	compatible = "ti,am335x-bone-green-wireless", "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		/* WL_EN */
+		gpio = <&gpio0 26 0>;
+		enable-active-high;
+	};
+};
+
+&am33xx_pinmux {
+	bt_pins: pinmux_bt_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_ad12.gpio1_28 BT_EN */
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* gmii1_rxd2.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT, MUX_MODE3)		/* mdio_data.uart3_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* mdio_clk.uart3_rtsn */
+		>;
+	};
+
+	wl18xx_pins: pinmux_wl18xx_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.gpio0_26 WL_EN */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.gpio0_27 WL_IRQ */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_csn0.gpio1_29 LS_BUF_EN */
+		>;
+	};
+};
+
+&mac_sw {
+	status = "disabled";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins &wl18xx_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins &bt_pins>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1835-st";
+		enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gpio1 {
+	ls-buf-en-hog {
+		gpio-hog;
+		gpios = <29 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LS_BUF_EN";
+	};
+};
+
+/* BT_AUD_OUT from wl1835 has to be pulled low when WL_EN is activated.*/
+/* in case it isn't, wilink8 ends up in one of the test modes that     */
+/* intruces various issues (elp wkaeup timeouts etc.)                  */
+/* On the BBGW this pin is routed through the level shifter (U21) that */
+/* introduces a pullup on the line and wilink8 ends up in a bad state. */
+/* use a gpio hog to force this pin low. An alternative may be adding  */
+/* an external pulldown on U21 pin 4.                                  */
+
+&gpio3 {
+	bt-aud-in-hog {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "MCASP0_AHCLKR";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts
new file mode 100644
index 000000000000..18cc0f49e999
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-bonegreen.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-bonegreen-common.dtsi"
+
+/ {
+	model = "TI AM335x BeagleBone Green";
+	compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
diff --git a/arch/arm/boot/dts/am335x-chiliboard.dts b/arch/arm/boot/dts/am335x-chiliboard.dts
index 310da20a8aa7..a223cdd3e30e 100644
--- a/arch/arm/boot/dts/am335x-chiliboard.dts
+++ b/arch/arm/boot/dts/am335x-chiliboard.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
  * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 /dts-v1/;
 #include "am335x-chilisom.dtsi"
@@ -14,6 +11,10 @@
 	compatible = "grinn,am335x-chiliboard", "grinn,am335x-chilisom",
 		     "ti,am33xx";
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -35,72 +36,132 @@
 };
 
 &am33xx_pinmux {
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* mdio_data.mdio_data */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
 	usb1_drvvbus: usb1_drvvbus {
 		pinctrl-single,pins = <
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* usb1_drvvbus.usb1_drvvbus */
+			AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	led_gpio_pins: led_gpio_pins {
 		pinctrl-single,pins = <
-			0x1e4 (PIN_OUTPUT | MUX_MODE7) /* emu0.gpio3_7 */
-			0x1e8 (PIN_OUTPUT | MUX_MODE7) /* emu1.gpio3_8 */
+			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_OUTPUT, MUX_MODE7) /* emu0.gpio3_7 */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_OUTPUT, MUX_MODE7) /* emu1.gpio3_8 */
 		>;
 	};
 };
 
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
 &ldo4_reg {
 	regulator-min-microvolt = <3300000>;
 	regulator-max-microvolt = <3300000>;
 };
 
 /* Ethernet */
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
 };
 
-&phy_sel {
-	rmii-clock-ext;
-};
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
 
-/* USB */
-&usb {
-	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&usb_ctrl_mod {
-	status = "okay";
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&usb1_phy {
-	status = "okay";
+&cpsw_port2 {
+	status = "disabled";
 };
 
+/* USB */
 &usb1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_drvvbus>;
-
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 /* microSD */
 &mmc1 {
 	pinctrl-names = "default";
@@ -110,3 +171,16 @@
 	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
+
+&tps {
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NNMI */
+
+	charger {
+		status = "okay";
+	};
+
+	pwrbutton {
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-chilisom.dtsi b/arch/arm/boot/dts/am335x-chilisom.dtsi
index 7e9a34dffe21..43b61e43ed1e 100644
--- a/arch/arm/boot/dts/am335x-chilisom.dtsi
+++ b/arch/arm/boot/dts/am335x-chilisom.dtsi
@@ -1,12 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2015 Jablotron s.r.o. -- http://www.jablotron.com/
+ * Copyright (C) 2015 Jablotron s.r.o. -- https://www.jablotron.com/
  * Author: Rostislav Lisovy <lisovy@jablotron.cz>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Grinn AM335x ChiliSOM";
@@ -18,7 +16,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -29,92 +27,32 @@
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)  /* mii1_crs.rmii1_crs */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_ref_clk.rmii_ref_clk */
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* mdio_data.mdio_data */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)
-			/* mdio_clk.mdio_clk */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	nandflash_pins: nandflash_pins {
 		pinctrl-single,pins = <
-			0x00 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x04 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x08 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0x0c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 };
 
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
@@ -181,20 +119,16 @@
 	};
 };
 
-/* Ethernet MAC */
-&mac {
-	slaves = <1>;
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
+&rtc {
+	system-power-controller;
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+	pinctrl-0 = <&ext_wakeup>;
+	pinctrl-names = "default";
+
+	ext_wakeup: ext-wakeup {
+		pins = "ext_wakeup0";
+		input-enable;
+	};
 };
 
 /* NAND Flash */
@@ -208,7 +142,12 @@
 	pinctrl-0 = <&nandflash_pins>;
 	ranges = <0 0 0x08000000 0x01000000>; /* CS0 0 @addr 0x08000000, size 0x01000000 */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;	/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -227,12 +166,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 	};
diff --git a/arch/arm/boot/dts/am335x-cm-t335.dts b/arch/arm/boot/dts/am335x-cm-t335.dts
new file mode 100644
index 000000000000..993b13420699
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-cm-t335.dts
@@ -0,0 +1,516 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-cm-t335.dts - Device Tree file for Compulab CM-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "CompuLab CM-T335";
+	compatible = "compulab,cm-t335", "ti,am33xx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;	/* 128 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_led_pins>;
+		led0 {
+			label = "cm_t335:green";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;	/* gpio2_0 */
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* regulator for mmc */
+	vmmc_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	/* Regulator for WiFi */
+	vwlan_fixed: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan_fixed";
+		gpio = <&gpio0 20 GPIO_ACTIVE_HIGH>; /* gpio0_20 */
+		enable-active-high;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 0>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "cm-t335";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Headphone", "Headphone Jack";
+
+		simple-audio-card,routing =
+			"Headphone Jack", "LHPOUT",
+			"Headphone Jack", "RHPOUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic Jack";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&bluetooth_pins>;
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			/* uart0_ctsn.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+			/* uart0_rtsn.i2c1_scl */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)
+		>;
+	};
+
+	gpio_led_pins: pinmux_gpio_led_pins {
+		pinctrl-single,pins = <
+			/* gpmc_csn3.gpio2_0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE7)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			/* gpmc_wpn.gpio0_31 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			/* uart1_ctsn.dcan0_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)
+			/* uart1_rtsn.dcan0_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd.dcan1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT, MUX_MODE2)
+			/* uart1_txd.dcan1_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE2)
+		>;
+	};
+
+	ecap0_pins: pinmux_ecap0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			/* mii1_tx_en.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	/* wl1271 bluetooth */
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* XDMA_EVENT_INTR0.gpio0_19 - bluetooth enable */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	/* TLV320AIC23B codec */
+	mcasp1_pins: pinmux_mcasp1_pins {
+		pinctrl-single,pins = <
+			/* MII1_CRS.mcasp1_aclkx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4)
+			/* MII1_RX_ER.mcasp1_fsx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4)
+			/* MII1_COL.mcasp1_axr2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE4)
+			/* RMII1_REF_CLK.mcasp1_axr3 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4)
+		>;
+	};
+
+	/* wl1271 WiFi */
+	wifi_pins: pinmux_wifi_pins {
+		pinctrl-single,pins = <
+			/* EMU1.gpio3_8 - WiFi IRQ */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)
+			/* XDMA_EVENT_INTR1.gpio0_20 - WiFi enable */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7)
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+/* WLS1271 bluetooth */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+	/* CM-T335 board EEPROM */
+	eeprom: 24c02@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+	/* Real Time Clock */
+	ext_rtc: em3027@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+	/* Audio codec */
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+
+	ecap0: pwm@100 {
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap0_pins>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x10000000>;	/* CS0: NAND */
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "spl";
+			reg = <0x00000000 0x00200000>;
+		};
+		partition@1 {
+			label = "uboot";
+			reg = <0x00200000 0x00100000>;
+		};
+		partition@2 {
+			label = "uboot environment";
+			reg = <0x00300000 0x00100000>;
+		};
+		partition@3 {
+			label = "dtb";
+			reg = <0x00400000 0x00100000>;
+		};
+		partition@4 {
+			label = "splash";
+			reg = <0x00500000 0x00400000>;
+		};
+		partition@5 {
+			label = "linux";
+			reg = <0x00900000 0x00600000>;
+		};
+		partition@6 {
+			label = "rootfs";
+			reg = <0x00F00000 0>;
+		};
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+};
+
+/* Touschscreen and analog digital converter */
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x01 0x10 0x23 0x32>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+/* CPU audio */
+&mcasp1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mcasp1_pins>;
+
+		op-mode = <0>;          /* MCASP_IIS_MODE */
+		tdm-slots = <2>;
+		/* 16 serializers */
+		num-serializer = <16>;
+		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
+		>;
+		tx-num-evt = <1>;
+		rx-num-evt = <1>;
+
+		#sound-dai-cells = <0>;
+		status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	ti,pindir-d0-out-d1-in;
+	/* WLS1271 WiFi */
+	wlcore: wlcore@1 {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pins>;
+		reg = <1>;
+		spi-max-frequency = <48000000>;
+		clock-xtal;
+		ref-clock-frequency = <38400000>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		vwlan-supply = <&vwlan_fixed>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 765be2766eb0..5beabaa5ff6a 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -20,12 +17,16 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -33,13 +34,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wlan_en_reg: fixedregulator@2 {
+	wlan_en_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 		regulator-name = "wlan-en-regulator";
 		regulator-min-microvolt = <1800000>;
@@ -53,7 +54,25 @@
 		enable-active-high;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	/* TPS79501 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS79501 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
@@ -73,28 +92,26 @@
 				0x0201006c>;	/* DOWN */
 	};
 
-	gpio_keys: volume_keys@0 {
+	gpio_keys: volume-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		switch@9 {
+		switch-9 {
 			label = "volume-up";
 			linux,code = <115>;
 			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		switch@10 {
+		switch-10 {
 			label = "volume-down";
 			linux,code = <114>;
 			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 0>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -102,50 +119,43 @@
 	};
 
 	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
+		compatible = "tfc,s9700rtwv43tr-01b";
+
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
+		backlight = <&backlight>;
 
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
+		port {
+			panel_0: endpoint {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
 	};
 };
 
@@ -155,206 +165,222 @@
 
 	matrix_keypad_s0: matrix_keypad_s0 {
 		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 
 	volume_keys_s0: volume_keys_s0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_sclk.gpio0_2 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* spi0_d0.gpio0_3 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)	/* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: pinmux_i2c1_pins {
 		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
 	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	nandflash_pins_s0: nandflash_pins_s0 {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, 0x0, MUX_MODE0)
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* mcasp0_aclkr.mmc0_sdwp */
 		>;
 	};
 
 	mmc3_pins: pinmux_mmc3_pins {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
-			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
-			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
 		>;
 	};
 
 	wlan_pins: pinmux_wlan_pins {
 		pinctrl-single,pins = <
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
-			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT, MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
 		>;
 	};
 
 	lcd_pins_s0: lcd_pins_s0 {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 		>;
 	};
 
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 		>;
 	};
 };
@@ -385,35 +411,10 @@
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -460,20 +461,29 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 
 &lcdc {
 	status = "okay";
+
+	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
 };
 
 &elm {
@@ -483,7 +493,7 @@
 &epwmss0 {
 	status = "okay";
 
-	ecap0: ecap@48300100 {
+	ecap0: pwm@100 {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ecap0_pins>;
@@ -496,7 +506,13 @@
 	pinctrl-0 = <&nandflash_pins_s0>;
 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -515,12 +531,9 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -531,7 +544,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -575,19 +588,21 @@
 #include "tps65910.dtsi"
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tps {
@@ -613,7 +628,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -667,28 +682,31 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
+&cpsw_port2 {
+	 status = "disabled";
 };
 
 &tscadc {
@@ -712,22 +730,21 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &mmc3 {
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 12
-		&edma 13>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 	status = "okay";
 	vmmc-supply = <&wlan_en_reg>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc3_pins &wlan_pins>;
-	ti,non-removable;
-	ti,needs-special-hs-handling;
+	non-removable;
 	cap-power-off-card;
 	keep-power-in-suspend;
 
@@ -737,15 +754,10 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-					    2 13>;
-};
-
 &sham {
 	status = "okay";
 };
@@ -759,3 +771,16 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dcan1_pins_default>;
 };
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
+
+&pruss_tm {
+	status = "okay";
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-evm-scale-data.bin";
+};
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 156d05efcb70..5b3278c0c46a 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /*
@@ -27,12 +24,16 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -40,13 +41,13 @@
 		regulator-boot-on;
 	};
 
-	lis3_reg: fixedregulator@1 {
+	lis3_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "lis3_reg";
 		regulator-boot-on;
 	};
 
-	wl12xx_vmmc: fixedregulator@2 {
+	wl12xx_vmmc: fixedregulator2 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&wl12xx_gpio>;
 		compatible = "regulator-fixed";
@@ -58,7 +59,7 @@
 		enable-active-high;
 	};
 
-	vtt_fixed: fixedregulator@3 {
+	vtt_fixed: fixedregulator3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt";
 		regulator-min-microvolt = <1500000>;
@@ -69,32 +70,50 @@
 		enable-active-high;
 	};
 
+	/* TPS79518 */
+	v1_8d_reg: fixedregulator-v1_8d {
+		compatible = "regulator-fixed";
+		regulator-name = "v1_8d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	/* TPS78633 */
+	v3_3d_reg: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "v3_3d";
+		vin-supply = <&vbat>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
 	leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&user_leds_s0>;
 
 		compatible = "gpio-leds";
 
-		led@1 {
+		led1 {
 			label = "evmsk:green:usr0";
 			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "evmsk:green:usr1";
 			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "evmsk:green:mmc0";
 			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@4 {
+		led4 {
 			label = "evmsk:green:heartbeat";
 			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -102,38 +121,38 @@
 		};
 	};
 
-	gpio_buttons: gpio_buttons@0 {
+	gpio_buttons: gpio_buttons0 {
 		compatible = "gpio-keys";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		switch@1 {
+		switch1 {
 			label = "button0";
 			linux,code = <0x100>;
 			gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@2 {
+		switch2 {
 			label = "button1";
 			linux,code = <0x101>;
 			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
 		};
 
-		switch@3 {
+		switch3 {
 			label = "button2";
 			linux,code = <0x102>;
 			gpios = <&gpio0 30 GPIO_ACTIVE_HIGH>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		switch@4 {
+		switch4 {
 			label = "button3";
 			linux,code = <0x103>;
 			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	backlight {
+	lcd_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 58 61 66 75 90 125 170 255>;
@@ -141,46 +160,39 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVMSK";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM335x-EVMSK";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
 	panel {
-		compatible = "ti,tilcdc,panel";
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&lcd_pins_default>;
 		pinctrl-1 = <&lcd_pins_sleep>;
-		status = "okay";
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-		display-timings {
-			480x272 {
-				hactive         = <480>;
-				vactive         = <272>;
-				hback-porch     = <43>;
-				hfront-porch    = <8>;
-				hsync-len       = <4>;
-				vback-porch     = <12>;
-				vfront-porch    = <4>;
-				vsync-len       = <10>;
-				clock-frequency = <9000000>;
-				hsync-active    = <0>;
-				vsync-active    = <0>;
+		backlight = <&lcd_bl>;
+
+		port {
+			panel_0: endpoint {
+				remote-endpoint = <&lcdc_0>;
 			};
 		};
 	};
@@ -192,225 +204,241 @@
 
 	lcd_pins_default: lcd_pins_default {
 		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
 
 	lcd_pins_sleep: lcd_pins_sleep {
 		pinctrl-single,pins = <
-			0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
-			0xa0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data0.lcd_data0 */
-			0xa4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data1.lcd_data1 */
-			0xa8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data2.lcd_data2 */
-			0xac (PULL_DISABLE | MUX_MODE7)	/* lcd_data3.lcd_data3 */
-			0xb0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data4.lcd_data4 */
-			0xb4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data5.lcd_data5 */
-			0xb8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data6.lcd_data6 */
-			0xbc (PULL_DISABLE | MUX_MODE7)	/* lcd_data7.lcd_data7 */
-			0xc0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data8.lcd_data8 */
-			0xc4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data9.lcd_data9 */
-			0xc8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data10.lcd_data10 */
-			0xcc (PULL_DISABLE | MUX_MODE7)	/* lcd_data11.lcd_data11 */
-			0xd0 (PULL_DISABLE | MUX_MODE7)	/* lcd_data12.lcd_data12 */
-			0xd4 (PULL_DISABLE | MUX_MODE7)	/* lcd_data13.lcd_data13 */
-			0xd8 (PULL_DISABLE | MUX_MODE7)	/* lcd_data14.lcd_data14 */
-			0xdc (PULL_DISABLE | MUX_MODE7)	/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 
 	user_leds_s0: user_leds_s0 {
 		pinctrl-single,pins = <
-			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-			0x14 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
-			0x18 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad5.gpio1_5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad6.gpio1_6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ad7.gpio1_7 */
 		>;
 	};
 
 	gpio_keys_s0: gpio_keys_s0 {
 		pinctrl-single,pins = <
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_oen_ren.gpio2_3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_advn_ale.gpio2_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_ben0_cle.gpio2_5 */
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
 	clkout2_pin: pinmux_clkout2_pin {
 		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)		/* xdma_event_intr1.clkout2 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 
 	ecap2_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x19c 0x4	/* mcasp0_ahclkr.ecap2_in_pwm2_out MODE4 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, 0x0, MUX_MODE4)	/* mcasp0_ahclkr.ecap2_in_pwm2_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
-			0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) 		/* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* mcasp0_aclkr.mmc0_sdwp */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLDOWN, MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	mmc2_pins: pinmux_mmc2_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
 		>;
 	};
 
 	wl12xx_gpio: pinmux_wl12xx_gpio {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT_PULLUP, MUX_MODE7) /* gpmc_csn0.gpio1_29 */
 		>;
 	};
 };
@@ -462,51 +490,27 @@
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
-		DVDD-supply = <&vbat>;
+		AVDD-supply = <&v3_3d_reg>;
+		IOVDD-supply = <&v3_3d_reg>;
+		DRVDD-supply = <&v3_3d_reg>;
+		DVDD-supply = <&v1_8d_reg>;
 	};
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &epwmss2 {
 	status = "okay";
 
-	ecap2: ecap@48304100 {
+	ecap2: pwm@100 {
 		status = "okay";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ecap2_pins>;
@@ -538,7 +542,7 @@
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
@@ -592,31 +596,37 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <1>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii-txid";
-	dual_emac_res_vlan = <2>;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
 };
 
 &mmc1 {
@@ -625,7 +635,7 @@
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &sham {
@@ -636,16 +646,17 @@
 	status = "okay";
 };
 
-&gpio0 {
+&gpio0_target {
 	ti,no-reset-on-init;
 };
 
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&wl12xx_vmmc>;
-	ti,non-removable;
+	non-removable;
 	bus-width = <4>;
 	cap-power-off-card;
+	keep-power-in-suspend;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc2_pins>;
 
@@ -655,25 +666,27 @@
 		compatible = "ti,wl1271";
 		reg = <2>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */
 		ref-clock-frequency = <38400000>;
 	};
 };
 
 &mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcasp1_pins>;
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
-		status = "okay";
+	status = "okay";
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
 };
 
 &tscadc {
@@ -687,5 +700,26 @@
 };
 
 &lcdc {
-      status = "okay";
+	status = "okay";
+
+	blue-and-red-wiring = "crossed";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&panel_0>;
+		};
+	};
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
+
+&pruss_tm {
+	status = "okay";
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am335x-evm-scale-data.bin";
 };
diff --git a/arch/arm/boot/dts/am335x-guardian.dts b/arch/arm/boot/dts/am335x-guardian.dts
new file mode 100644
index 000000000000..b357364e93f9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-guardian.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018 Robert Bosch Power Tools GmbH
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Bosch AM335x Guardian";
+	compatible = "bosch,am335x-guardian", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+		tick-timer = &timer2;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	guardian_buttons: gpio-keys {
+		pinctrl-names = "default";
+		pinctrl-0 = <&guardian_button_pins>;
+		compatible = "gpio-keys";
+
+		select-button {
+			label = "guardian-select-button";
+			linux,code = <KEY_5>;
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		power-button {
+			label = "guardian-power-button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	guardian_leds: gpio-leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&guardian_led_pins>;
+		compatible = "gpio-leds";
+
+		life-led {
+			label = "guardian:life-led";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		display-timings {
+			320x240 {
+				hactive         = <320>;
+				vactive         = <240>;
+				hback-porch     = <68>;
+				hfront-porch    = <20>;
+				hsync-len       = <1>;
+				vback-porch     = <18>;
+				vfront-porch    = <4>;
+				vsync-len       = <1>;
+				clock-frequency = <9000000>;
+				hsync-active    = <0>;
+				vsync-active    = <0>;
+			};
+		};
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <24>;
+			bus-width         = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+	};
+
+	guardian_beeper: pwm-7 {
+		compatible = "ti,omap-dmtimer-pwm";
+		#pwm-cells = <3>;
+		ti,timers = <&timer7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&guardian_beeper_pins>;
+		ti,clock-source = <0x01>;
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	mt_keypad: mt_keypad@0 {
+		compatible = "gpio-mt-keypad";
+		debounce-delay-ms = <10>;
+		col-scan-delay-us = <2>;
+		keypad,num-lines = <5>;
+		linux,no-autorepeat;
+		gpio-activelow;
+		line-gpios = <
+			&gpio1 24 GPIO_ACTIVE_LOW    /*gpio_56*/
+			&gpio1 23 GPIO_ACTIVE_LOW    /*gpio_55*/
+			&gpio1 22 GPIO_ACTIVE_LOW    /*gpio_54*/
+			&gpio1 20 GPIO_ACTIVE_LOW    /*gpio_52*/
+			&gpio1 16 GPIO_ACTIVE_LOW    /*gpio_48*/
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;  /* CS0: 16MB for NAND */
+	status = "okay";
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <15>;
+		gpmc,oe-on-ns = <1>;
+		gpmc,oe-off-ns = <15>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		/*
+		 * MTD partition table
+		 *
+		 * All SPL-* partitions are sized to minimal length which can
+		 * be independently programmable. For NAND flash this is equal
+		 * to size of erase-block.
+		 */
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "SPL";
+			reg = <0x0 0x40000>;
+		};
+
+		partition@1 {
+			label = "SPL.backup1";
+			reg = <0x40000  0x40000>;
+		};
+
+		partition@2 {
+			label = "SPL.backup2";
+			reg = <0x80000  0x40000>;
+		};
+
+		partition@3 {
+			label = "SPL.backup3";
+			reg = <0xc0000  0x40000>;
+		};
+
+		partition@4 {
+			label = "u-boot";
+			reg = <0x100000 0x100000>;
+		};
+
+		partition@5 {
+			label = "u-boot.backup1";
+			reg = <0x200000 0x100000>;
+		};
+
+		partition@6 {
+			label = "u-boot-2";
+			reg = <0x300000 0x100000>;
+		};
+
+		partition@7 {
+			label = "u-boot-2.backup1";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@8 {
+			label = "u-boot-env";
+			reg = <0x500000 0x40000>;
+		};
+
+		partition@9 {
+			label = "u-boot-env.backup1";
+			reg = <0x540000 0x40000>;
+		};
+
+		partition@10 {
+			label = "splash-screen";
+			reg = <0x580000 0x40000>;
+		};
+
+		partition@11 {
+			label = "UBI";
+			reg = <0x5c0000 0x1fa40000>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+&lcdc {
+	blue-and-red-wiring = "crossed";
+	status = "okay";
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <0>;
+		};
+	};
+};
+
+&mmc1 {
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
+
+&spi0 {
+	ti,pindir-d0-out-d1-in;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+#include "tps65217.dtsi"
+
+&tps {
+  /*
+   * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+   * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+   * mode and risk hardware damage if this mode is entered.
+   *
+   * For details, see linux-omap mailing list May 2015 thread
+   *  [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+   * In particular, messages:
+   *  http://www.spinics.net/lists/linux-omap/msg118585.html
+   *  http://www.spinics.net/lists/linux-omap/msg118615.html
+   *
+   * You can override this later with
+   *  &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+   * if you want to use RTC-only mode and made sure you are not affected
+   * by the hardware problems. (Tip: double-check by performing a current
+   * measurement after shutdown: it should be less than 1 mA.)
+   */
+	ti,pmic-shutdown-controller;
+	interrupt-parent = <&intc>;
+	interrupts = <7>; /* NMI */
+
+	backlight {
+		isel = <1>;  /* 1 - ISET1, 2 ISET2 */
+		fdim = <500>; /* TPS65217_BL_FDIM_500HZ */
+		default-brightness = <50>;
+		/* 1(on) - enable current sink, while initialization */
+		/* 0(off) - disable current sink, while initialization */
+		isink-en = <1>;
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"MirxWakeup",
+		"",
+		"";
+};
+
+&gpio3 {
+	ti,gpio-always-on;
+	ti,no-reset-on-init;
+	gpio-line-names =
+		"",
+		"MirxBtReset",
+		"",
+		"CcVolAdcEn",
+		"MirxBlePause",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"AspEn",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"BatVolAdcEn",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"",
+		"";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+};
+
+&usb1 {
+	dr_mode = "host";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin &guardian_interface_pins>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
+			AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
+		>;
+	};
+
+	guardian_interface_pins: pinmux_interface_pins {
+		pinctrl-single,pins = <
+			/* ADC_BATSENSE_EN */
+			/* (A14) MCASP0_AHCLKx.gpio3[21] */
+			AM33XX_IOPAD(0x9ac, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* ADC_COINCELL_EN */
+			/* (J16) MII1_TX_EN.gpio3[3] */
+			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* ASP_ENABLE */
+			/* (A13) MCASP0_ACLKx.gpio3[14] */
+			AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			/* (D16) uart1_rxd.uart1_rxd */
+			AM33XX_IOPAD(0x980, PIN_INPUT | MUX_MODE7)
+			/* (D15) uart1_txd.uart1_txd */
+			AM33XX_IOPAD(0x984, PIN_INPUT | MUX_MODE7)
+			/*SWITCH-OFF_3V6*/
+			/* (M18) gpio0[1] */
+			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE7)
+			/* MIRACULIX */
+			/* (H17) gmii1_crs.gpio3[1] */
+			AM33XX_IOPAD(0x90c, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* (H18) rmii1_refclk.gpio0[29] */
+			AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+			/* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_IOPAD(0x91c, PIN_INPUT           | MUX_MODE7 )
+			/* (J17) gmii1_rxdv.gpio3[4] */
+			AM33XX_IOPAD(0x918, PIN_OUTPUT_PULLDOWN | MUX_MODE7 )
+		>;
+	};
+
+	guardian_beeper_pins: pinmux_dmtimer7_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x968, PIN_OUTPUT | MUX_MODE5) /* (E18) timer7 */
+		>;
+	};
+
+	guardian_button_pins: pinmux_guardian_button_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE7) /* (M16) gmii1_rxd0.gpio2[21] */
+			AM33XX_IOPAD(0x884, PIN_INPUT | MUX_MODE7) /* (V9)  gpmc_csn2.gpio1[31] */
+		>;
+	};
+
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	led_bl_pins: gpio_led_bl_pins {
+		pinctrl-single,pins = <
+			/* P9_14, gpmc_a[2].GPIO1[18] (backlight control) */
+			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE7)
+		>;
+	};
+
+	lcd_disen_pins: pinmux_lcd_disen_pins {
+		pinctrl-single,pins = <
+			/* P9_27, mcasp0_fsr.gpio3[19] (lcd_disen) */
+			AM33XX_IOPAD(0x9a4, PIN_OUTPUT_PULLUP | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	lcd_pins_default: pinmux_lcd_pins_default {
+		pinctrl-single,pins = <
+			/* (U10) gpmc_ad8.lcd_data23 */
+			AM33XX_IOPAD(0x820, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T10) gpmc_ad9.lcd_data22 */
+			AM33XX_IOPAD(0x824, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T11) gpmc_ad10.lcd_data21 */
+			AM33XX_IOPAD(0x828, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (U12) gpmc_ad11.lcd_data20 */
+			AM33XX_IOPAD(0x82c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (T12) gpmc_ad12.lcd_data19 */
+			AM33XX_IOPAD(0x830, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (R12) gpmc_ad13.lcd_data18 */
+			AM33XX_IOPAD(0x834, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (V13) gpmc_ad14.lcd_data17 */
+			AM33XX_IOPAD(0x838, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* (U13) gpmc_ad15.lcd_data16 */
+			AM33XX_IOPAD(0x83c, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE1)
+			/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8a8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8ac, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8b8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8bc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8c8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8cc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8d8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8dc, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e0, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e4, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8e8, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8ec, PIN_OUTPUT | SLEWCTRL_SLOW | MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: pinmux_lcd_pins_sleep {
+		pinctrl-single,pins = <
+			/* lcd_data0.lcd_data0 */
+			AM33XX_IOPAD(0x8a0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data1.lcd_data1 */
+			AM33XX_IOPAD(0x8a4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data2.lcd_data2 */
+			AM33XX_IOPAD(0x8a8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data3.lcd_data3 */
+			AM33XX_IOPAD(0x8ac, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data4.lcd_data4 */
+			AM33XX_IOPAD(0x8b0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data5.lcd_data5 */
+			AM33XX_IOPAD(0x8b4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data6.lcd_data6 */
+			AM33XX_IOPAD(0x8b8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data7.lcd_data7 */
+			AM33XX_IOPAD(0x8bc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data8.lcd_data8 */
+			AM33XX_IOPAD(0x8c0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data9.lcd_data9 */
+			AM33XX_IOPAD(0x8c4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data10.lcd_data10 */
+			AM33XX_IOPAD(0x8c8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data11.lcd_data11 */
+			AM33XX_IOPAD(0x8cc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data12.lcd_data12 */
+			AM33XX_IOPAD(0x8d0, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data13.lcd_data13 */
+			AM33XX_IOPAD(0x8d4, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data14.lcd_data14 */
+			AM33XX_IOPAD(0x8d8, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_data15.lcd_data15 */
+			AM33XX_IOPAD(0x8dc, PULL_DISABLE | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_vsync.lcd_vsync */
+			AM33XX_IOPAD(0x8e0, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_hsync.lcd_hsync */
+			AM33XX_IOPAD(0x8e4, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_pclk.lcd_pclk */
+			AM33XX_IOPAD(0x8e8, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+			/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_IOPAD(0x8ec, PIN_INPUT_PULLDOWN | SLEWCTRL_SLOW | MUX_MODE7)
+		>;
+	};
+
+	guardian_led_pins: pinmux_guardian_led_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x868, PIN_OUTPUT | MUX_MODE7) /* (T16) gpmc_a10.gpio1[26] */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat3.mmc0_dat3 */
+			AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat2.mmc0_dat2 */
+			AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat1.mmc0_dat1 */
+			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_dat0.mmc0_dat0 */
+			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_clk.mmc0_clk */
+			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc0_cmd.mmc0_cmd */
+			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)         /* GPIO0_6 */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			/* SPI0_CLK  - spi0_clk.spi */
+			AM33XX_IOPAD(0x950, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			/* SPI0_MOSI - spi0_d0.spi0 */
+			AM33XX_IOPAD(0x954, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			/* SPI0_MISO - spi0_d1.spi0 */
+			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* SPI0_CS0 - spi */
+			AM33XX_IOPAD(0x95c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			/* uart0_rxd.uart0_rxd */
+			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)
+			/* uart0_txd.uart0_txd */
+			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			/* K18 uart2_rxd.mirx_txd */
+			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE1)
+			/* L18 uart2_txd.mirx_rxd */
+			AM33XX_IOPAD(0x930, PIN_OUTPUT_PULLDOWN | MUX_MODE1)
+		>;
+	};
+
+	nandflash_pins: pinmux_nandflash_pins {
+		pinctrl-single,pins = <
+			/* (U7) gpmc_ad0.gpmc_ad0 */
+			AM33XX_IOPAD(0x800, PIN_INPUT | MUX_MODE0)
+			/* (V7) gpmc_ad1.gpmc_ad1 */
+			AM33XX_IOPAD(0x804, PIN_INPUT | MUX_MODE0)
+			/* (R8) gpmc_ad2.gpmc_ad2 */
+			AM33XX_IOPAD(0x808, PIN_INPUT | MUX_MODE0)
+			/* (T8) gpmc_ad3.gpmc_ad3 */
+			AM33XX_IOPAD(0x80c, PIN_INPUT | MUX_MODE0)
+			/* (U8) gpmc_ad4.gpmc_ad4 */
+			AM33XX_IOPAD(0x810, PIN_INPUT | MUX_MODE0)
+			/* (V8) gpmc_ad5.gpmc_ad5 */
+			AM33XX_IOPAD(0x814, PIN_INPUT | MUX_MODE0)
+			/* (R9) gpmc_ad6.gpmc_ad6 */
+			AM33XX_IOPAD(0x818, PIN_INPUT | MUX_MODE0)
+			/* (T9) gpmc_ad7.gpmc_ad7 */
+			AM33XX_IOPAD(0x81c, PIN_INPUT | MUX_MODE0)
+			/* (T17) gpmc_wait0.gpmc_wait0 */
+			AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE0)
+			/* (U17) gpmc_wpn.gpmc_wpn */
+			AM33XX_IOPAD(0x874, PIN_OUTPUT | MUX_MODE0)
+			/* (V6) gpmc_csn0.gpmc_csn0 */
+			AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)
+			/* (R7) gpmc_advn_ale.gpmc_advn_ale */
+			AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)
+			/* (T7) gpmc_oen_ren.gpmc_oen_ren */
+			AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)
+			/* (U6) gpmc_wen.gpmc_wen */
+			AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)
+			/* (T6) gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
new file mode 100644
index 000000000000..5835c0cdda50
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * AM335x ICE V2 board
+ * http://www.ti.com/tool/tmdsice3359
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+	model = "TI AM3359 ICE-V2";
+	compatible = "ti,am3359-icev2", "ti,am33xx";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	/* Tricolor status LEDs */
+	leds1 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds>;
+
+		led0 {
+			label = "status0:red:cpu0";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		led1 {
+			label = "status0:green:usr";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "status0:yellow:usr";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "status1:red:mmc0";
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+
+		led4 {
+			label = "status1:green:usr";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "status1:yellow:usr";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+	gpio-decoder {
+		compatible = "gpio-decoder";
+		gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+			<&pca9536 2 GPIO_ACTIVE_HIGH>,
+			<&pca9536 1 GPIO_ACTIVE_HIGH>,
+			<&pca9536 0 GPIO_ACTIVE_HIGH>;
+		linux,axis = <0>; /* ABS_X */
+		decoder-max-value = <9>;
+	};
+};
+
+&am33xx_pinmux {
+	user_leds: user_leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT, MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT, MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
+		>;
+	};
+
+	mmc0_pins_default: mmc0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c0_pins_default: i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+
+	spi0_pins_default: spi0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
+		>;
+	};
+
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLUP, MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1, RMII mode */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			/* Slave 2, RMII mode */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_wait0.rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_col.rmii2_refclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a11.rmii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a10.rmii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_wpn.rmii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a5.rmii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a4.rmii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* gpmc_a0.rmii2_txen */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+
+			/* Slave 2 reset value */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_default>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: power-controller@2d {
+		reg = <0x2d>;
+	};
+
+	tpic2810: gpio@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pca9536: gpio@41 {
+		compatible = "ti,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/* osd9616p0899-10 */
+	display@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <16>;
+		solomon,width = <96>;
+		solomon,com-seq;
+		solomon,com-invdir;
+		solomon,page-offset = <0>;
+		solomon,prechargep1 = <2>;
+		solomon,prechargep2 = <13>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_default>;
+
+	sn65hvs882@1 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+
+		reg = <1>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+
+	spi_nor: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <80000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		partition@0 {
+			label = "u-boot-spl";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@1 {
+			label = "u-boot";
+			reg = <0x80000 0x100000>;
+			read-only;
+		};
+
+		partition@2 {
+			label = "u-boot-env";
+			reg = <0x180000 0x20000>;
+			read-only;
+		};
+
+		partition@3 {
+			label = "misc";
+			reg = <0x1A0000 0x660000>;
+		};
+	};
+
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <1 2 3 4 5 6 7>;
+	};
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1326000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins_default>;
+};
+
+&gpio0_target {
+	/* Do not idle the GPIO used for holding the VTT regulator */
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+	status = "okay";
+};
+
+&gpio3 {
+	pr1-mii-ctl-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PR1_MII_CTRL";
+	};
+
+	mux-mii-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		/* ETH1 mux: Low for MII-PRU, high for RMII-CPSW */
+		output-high;
+		line-name = "MUX_MII_CTL1";
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;   /* PHY datasheet states 1uS min */
+
+	ethphy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&pruss_tm {
+	status = "okay";
+};
+
+&rtc {
+	system-power-controller;
+};
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index c0e1135256cc..3fddf80dcf71 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -1,16 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * am335x-igep0033.dtsi - Device Tree file for IGEP COM AQUILA AM335x
  *
  * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	cpus {
@@ -19,7 +17,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -30,14 +28,14 @@
 
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "com:green:user";
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -45,7 +43,7 @@
 		regulator-boot-on;
 	};
 
-	vmmc: fixedregulator@0 {
+	vmmc: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -56,65 +54,70 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	nandflash_pins: pinmux_nandflash_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
 	leds_pins: pinmux_leds_pins {
 		pinctrl-single,pins = <
-			0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
 		>;
 	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 };
 
-&davinci_mdio {
-	status = "okay";
-};
+&davinci_mdio_sw {
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rmii";
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&phy_sel {
-	rmii-clock-ext;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <2>;
 };
 
 &elm {
@@ -129,7 +132,12 @@
 	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
 
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		nand-bus-width = <8>;
 		ti,nand-ecc-opt = "bch8";
 		gpmc,device-width = <1>;
@@ -147,23 +155,20 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		elm_id = <&elm>;
+		ti,elm-id = <&elm>;
 
 		/* MTD partition table */
 		partition@0 {
 			label = "SPL";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 
 		partition@1 {
@@ -183,7 +188,7 @@
 
 		partition@4 {
 			label = "File System";
-			reg = <0x00780000 0x007880000>;
+			reg = <0x00780000 0x07880000>;
 		};
 	};
 };
@@ -212,35 +217,10 @@
 	pinctrl-0 = <&uart0_pins>;
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 #include "tps65910.dtsi"
 
 &tps {
diff --git a/arch/arm/boot/dts/am335x-lxm.dts b/arch/arm/boot/dts/am335x-lxm.dts
index 5c5667a3624d..1282dae144dd 100644
--- a/arch/arm/boot/dts/am335x-lxm.dts
+++ b/arch/arm/boot/dts/am335x-lxm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014 NovaTech LLC - https://www.novatechweb.com
  */
 /dts-v1/;
 
@@ -19,13 +16,13 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
 
 	/* Power supply provides a fixed 5V @2A */
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -34,7 +31,7 @@
 	};
 
 	/* Power supply provides a fixed 3.3V @3A */
-	vmmcsd_fixed: fixedregulator@1 {
+	vmmcsd_fixed: fixedregulator1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
@@ -46,109 +43,109 @@
 &am33xx_pinmux {
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rxer */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_txen */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rxer */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* rmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
 
 			/* Slave 2 */
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_txen */
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td1 */
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* rmii2_refclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* rmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* rmii2_rxer */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* rmii2_refclk */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_int */
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_crs_dv */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rxer */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_txen */
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td1 */
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_td0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_rd0 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii1_refclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rxer */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii1_refclk */
 
 			/* Slave 2 reset value*/
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_txen */
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td1 */
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_td0 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd1 */
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rd0 */
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_crs_dv */
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_rxer */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_int */
-			0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* rmii2_refclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_rxer */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_int */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* rmii2_refclk */
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 };
@@ -163,11 +160,15 @@
 	serial_config1: serial_config1@20 {
 		compatible = "nxp,pca9539";
 		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
 
 	serial_config2: serial_config2@21 {
 		compatible = "nxp,pca9539";
 		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
 	};
 
 	tps: tps@2d {
@@ -286,65 +287,45 @@
 	status = "okay";
 };
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
 	dr_mode = "host";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <5>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <4>;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
 	phy-mode = "rmii";
-	dual_emac_res_vlan = <3>;
-};
-
-&phy_sel {
-	rmii-clock-ext;
+	ti,dual-emac-pvid = <3>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+
+	ethphy0: ethernet-phy@5 {
+		reg = <5>;
+	};
+
+	ethphy1: ethernet-phy@4 {
+		reg = <4>;
+	};
 };
 
 &mmc1 {
@@ -360,7 +341,7 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <8>;
-	ti,non-removable;
+	non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
new file mode 100644
index 000000000000..49e280b42442
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2100-common.dtsi
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ *          Wes Huang (黃淵河) <wes.huang@moxa.com>
+ *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: vmmcsd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	buttons: push_button {
+		compatible = "gpio-keys";
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	push_button_pins: pinmux_push_button {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_23 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			/* eMMC */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad12.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad13.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad14.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad15.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad8.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad9.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad10.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad11.mmc1_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&uart0 {
+	/* Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_wdt: rtc_wdt@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+	status = "okay";
+};
+
+&cpsw_port1 {
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	ti,dual-emac-pvid = <2>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0_target {
+	ti,no-reset-on-init;
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	pinctrl-0 = <&mmc1_pins_default>;
+	non-removable;
+	status = "okay";
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&push_button_pins>;
+
+	button-0 {
+		label = "push_button";
+		linux,code = <0x100>;
+		gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	flash@0 {
+		compatible = "mx25l6405d";
+		spi-max-frequency = <40000000>;
+
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* reg : The partition's offset and size within the mtd bank. */
+			partitions@0 {
+				label = "MLO";
+				reg = <0x0 0x80000>;
+			};
+
+			partitions@1 {
+				label = "U-Boot";
+				reg = <0x80000 0x100000>;
+			};
+
+			partitions@2 {
+				label = "U-Boot Env";
+				reg = <0x180000 0x40000>;
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+
+	tpm_spi_tis@0 {
+		compatible = "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <500000>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
new file mode 100644
index 000000000000..1cc513ed92cc
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/
+ *
+ * Authors: SZ Lin (林上智) <sz.lin@moxa.com>
+ *          Wes Huang (黃淵河) <wes.huang@moxa.com>
+ *          Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com>
+ */
+
+/dts-v1/;
+
+#include "am335x-moxa-uc-2100-common.dtsi"
+
+/ {
+	model = "Moxa UC-2101";
+	compatible = "moxa,uc-2101", "ti,am33xx";
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "UC2100:GREEN:USER";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* mii1_crs.rmii1_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txen.rmii1_txen */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	spi1_pins: pinmux_spi1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	 /* ecap0_in_pwm0_out.spi1_sclk */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart1_ctsn.spi1_cs0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart0_ctsn.spi1_d0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	 /* uart0_rtsn.spi1_d1 */
+		>;
+	};
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
new file mode 100644
index 000000000000..7d00e8b20f18
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-common.dtsi
@@ -0,0 +1,421 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: Johnson Chen <johnsonch.chen@moxa.com>
+ */
+
+#include "am33xx.dtsi"
+
+/ {
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	vbat: vbat-regulator {
+		compatible = "regulator-fixed";
+	};
+
+	/* Power supply provides a fixed 3.3V @3A */
+	vmmcsd_fixed: vmmcsd-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	buttons: push_button {
+		compatible = "gpio-keys";
+	};
+
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&minipcie_pins>;
+
+	minipcie_pins: pinmux_minipcie {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_pclk.gpio2_24 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_ac_bias_en.gpio2_25 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* lcd_vsync.gpio2_22  Power off PIN*/
+		>;
+	};
+
+	push_button_pins: pinmux_push_button {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_ahcklx.gpio3_21 */
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_ctsn.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart0_rtsn.i2c1_scl */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE6)		/* lcd_data14.uart5_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT_PULLDOWN, MUX_MODE6)  /* lcd_data15.uart5_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_INPUT_PULLUP, MUX_MODE4)     /* lcd_data9.uart5_rxd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE4)		/* lcd_data8.uart5_txd */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			/* Slave 2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_crs_dv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rxer */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE3)  /* rmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE3)   /* rmii2_rd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE1)  /* rmii2_refclk */
+
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc0_pins_default: pinmux_mmc0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLUP, MUX_MODE7)	/* mcasp0_aclkx.gpio3_14 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)    /* mcasp0_aclkx.gpio3_18 */
+		>;
+	};
+
+	mmc2_pins_default: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			/* eMMC */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad8.mmc2_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad9.mmc2_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad10.mmc2_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ad11.mmc2_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)     /* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc2_clk */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+};
+
+&uart0 {
+	/* Console */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+};
+
+&uart1 {
+	/* UART 1 setting */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart5 {
+	/* UART 2 setting */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		compatible = "ti,tps65910";
+		reg = <0x2d>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c16";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_wdt: rtc_wdt@68 {
+		compatible = "dallas,ds1374";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+	gpio_xten: gpio_xten@27 {
+		compatible = "nxp,pca9535";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x27>;
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+
+#include "tps65910.dtsi"
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			compatible = "regulator-fixed";
+			regulator-name = "vmmc_reg";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* Power */
+&vbat {
+	regulator-name = "vbat";
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&gpio0_target {
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-0 = <&mmc0_pins_default>;
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&mmc3 {
+	dmas = <&edma_xbar 12 0 1
+			&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	pinctrl-0 = <&mmc2_pins_default>;
+	ti,non-removable;
+	status = "okay";
+};
+
+&buttons {
+	pinctrl-names = "default";
+	pinctrl-0 = <&push_button_pins>;
+
+	button-0 {
+		label = "push_button";
+		linux,code = <0x100>;
+		gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* SPI Busses */
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	flash@0 {
+		compatible = "mx25l6405d";
+		spi-max-frequency = <40000000>;
+
+		reg = <0>;
+		spi-cpol;
+		spi-cpha;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* reg : The partition's offset and size within the mtd bank. */
+		partitions@0 {
+			label = "MLO";
+			reg = <0x0 0x80000>;
+		};
+
+		partitions@1 {
+			label = "U-Boot";
+			reg = <0x80000 0x100000>;
+		};
+
+		partitions@2 {
+			label = "U-Boot Env";
+			reg = <0x180000 0x20000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
new file mode 100644
index 000000000000..0c7949d21bd9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-moxa-uc-8100-me-t.dts
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 MOXA Inc. - https://www.moxa.com/
+ *
+ * Author: SZ Lin (林上智) <sz.lin@moxa.com>
+ */
+/dts-v1/;
+
+#include "am335x-moxa-uc-8100-common.dtsi"
+
+/ {
+	model = "Moxa UC-8100-ME-T";
+	compatible = "moxa,uc-8100-me-t", "ti,am33xx";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led1 {
+			label = "uc8100me:CEL1";
+			gpios = <&gpio_xten 8 0>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "uc8100me:CEL2";
+			gpios = <&gpio_xten 9 0>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "uc8100me:CEL3";
+			gpios = <&gpio_xten 10 0>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "uc8100me:DIA1";
+			gpios = <&gpio_xten 11 0>;
+			default-state = "off";
+		};
+		led5 {
+			label = "uc8100me:DIA2";
+			gpios = <&gpio_xten 12 0>;
+			default-state = "off";
+		};
+		led6 {
+			label = "uc8100me:DIA3";
+			gpios = <&gpio_xten 13 0>;
+			default-state = "off";
+		};
+		led7 {
+			label = "uc8100me:SD";
+			gpios = <&gpio_xten 14 0>;
+			default-state = "off";
+		};
+		led8 {
+			label = "uc8100me:USB";
+			gpios = <&gpio_xten 15 0>;
+			default-state = "off";
+		};
+		led9 {
+			label = "uc8100me:USER";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&i2c0 {
+	tpm: tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+};
+
+&tps {
+	regulators {
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am335x-myirtech-myc.dtsi b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
new file mode 100644
index 000000000000..6eea18b29355
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-myirtech-myc.dtsi
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
+
+/* Based on code by myc_c335x.dts, MYiRtech.com */
+/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "MYIR MYC-AM335X";
+	compatible = "myir,myc-am335x", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_core>;
+			voltage-tolerance = <2>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	clk32k: clk32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+
+		#clock-cells = <0>;
+	};
+
+	vdd_mod: vdd_mod_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-mod";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_core: vdd_core_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-core";
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_mod>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_mod_pins>;
+
+		led_mod: led_mod {
+			label = "module:user";
+			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&eth_slave1_pins_default>;
+	pinctrl-1 = <&eth_slave1_pins_sleep>;
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mdio_pins_default>;
+	pinctrl-1 = <&mdio_pins_sleep>;
+
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&nand_pins_default>;
+	pinctrl-1 = <&nand_pins_sleep>;
+	ranges = <0 0 0x8000000 0x1000000>;
+	status = "okay";
+
+	nand0: nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE_NONE>;
+		nand-bus-width = <8>;
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		ti,elm-id = <&elm>;
+		ti,nand-ecc-opt = "bch8";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default", "gpio", "sleep";
+	pinctrl-0 = <&i2c0_pins_default>;
+	pinctrl-1 = <&i2c0_pins_gpio>;
+	pinctrl-2 = <&i2c0_pins_sleep>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&vdd_mod>;
+	};
+};
+
+&rtc {
+	clocks = <&clk32k>;
+	clock-names = "ext-clk";
+	system-power-controller;
+};
+
+&am33xx_pinmux {
+	mdio_pins_default: pinmux_mdio_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)	/* mdio_data */
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)			/* mdio_clk */
+		>;
+	};
+
+	mdio_pins_sleep: pinmux_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	eth_slave1_pins_default: pinmux_eth_slave1_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii1_rd0 */
+		>;
+	};
+
+	eth_slave1_pins_sleep: pinmux_eth_slave1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins_default: pinmux_i2c0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0)	/* I2C0_SDA */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE0)	/* I2C0_SCL */
+		>;
+	};
+
+	i2c0_pins_gpio: pinmux_i2c0_pins_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE7)			/* gpio3[5] */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE7)			/* gpio3[6] */
+		>;
+	};
+
+	i2c0_pins_sleep: pinmux_i2c0_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	led_mod_pins: pinmux_led_mod_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* gpio3[18] */
+		>;
+	};
+
+	nand_pins_default: pinmux_nand_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_ad7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)		/* gpmc_wait0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLUP, MUX_MODE7)		/* gpio0[31] */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)			/* gpmc_csn0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)			/* gpmc_advn_ale */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)			/* gpmc_oen_ren */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)			/* gpmc_wen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)			/* gpmc_be0n_cle */
+		>;
+	};
+
+	nand_pins_sleep: pinmux_nand_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-myirtech-myd.dts b/arch/arm/boot/dts/am335x-myirtech-myd.dts
new file mode 100644
index 000000000000..425ad9b81a68
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-myirtech-myd.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* SPDX-FileCopyrightText: Alexander Shiyan, <shc_work@mail.ru> */
+/* Based on code by myd_c335x.dts, MYiRtech.com */
+/* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ */
+
+/dts-v1/;
+
+#include "am335x-myirtech-myc.dtsi"
+
+#include <dt-bindings/display/tda998x.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "MYIR MYD-AM335X";
+	compatible = "myir,myd-am335x", "myir,myc-am335x", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	clk12m: clk12m {
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+
+		#clock-cells = <0>;
+	};
+
+	gpio_buttons: gpio_buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_buttons_pins>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button1: button@0 {
+			reg = <0>;
+			label = "button1";
+			linux,code = <BTN_1>;
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button2: button@1 {
+			reg = <1>;
+			label = "button2";
+			linux,code = <BTN_2>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&master_codec>;
+		simple-audio-card,frame-master = <&master_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+
+		master_codec: simple-audio-card,codec@1 {
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,codec@2 {
+			sound-dai = <&tda9988>;
+		};
+	};
+
+	vdd_5v0: vdd_5v0_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_3v3: vdd_3v3_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd_5v0>;
+	};
+};
+
+&cpsw_port2 {
+	status = "okay";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	phy1: ethernet-phy@6 {
+		reg = <6>;
+		eee-broken-1000t;
+	};
+};
+
+&mac_sw {
+	pinctrl-0 = <&eth_slave1_pins_default>, <&eth_slave2_pins_default>;
+	pinctrl-1 = <&eth_slave1_pins_sleep>, <&eth_slave2_pins_sleep>;
+	slaves = <2>;
+};
+
+&dcan0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcan0_pins_default>;
+	pinctrl-1 = <&dcan0_pins_sleep>;
+	status = "okay";
+};
+
+&dcan1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dcan1_pins_default>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	status = "okay";
+};
+
+&ehrpwm0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ehrpwm0_pins_default>;
+	pinctrl-1 = <&ehrpwm0_pins_sleep>;
+	status = "okay";
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio", "sleep";
+	pinctrl-0 = <&i2c1_pins_default>;
+	pinctrl-1 = <&i2c1_pins_gpio>;
+	pinctrl-2 = <&i2c1_pins_sleep>;
+	clock-frequency = <400000>;
+	scl-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg =<0xa>;
+		clocks = <&clk12m>;
+		micbias-resistor-k-ohms = <4>;
+		micbias-voltage-m-volts = <2250>;
+		VDDA-supply = <&vdd_3v3>;
+		VDDIO-supply = <&vdd_3v3>;
+
+		#sound-dai-cells = <0>;
+	};
+
+	tda9988: tda9988@70 {
+		compatible = "nxp,tda998x";
+		reg =<0x70>;
+		audio-ports = <TDA998x_I2S 1>;
+
+		#sound-dai-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_0: endpoint {
+					remote-endpoint = <&lcdc_0>;
+				};
+			};
+		};
+	};
+};
+
+&lcdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&lcdc_pins_default>;
+	pinctrl-1 = <&lcdc_pins_sleep>;
+	blue-and-red-wiring = "straight";
+	status = "okay";
+
+	port {
+		lcdc_0: endpoint@0 {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&leds {
+	pinctrl-0 = <&led_mod_pins &leds_pins>;
+
+	led1: led1 {
+		label = "base:user1";
+		gpios = <&gpio0 27 GPIO_ACTIVE_LOW>;
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "off";
+	};
+
+	led2: led2 {
+		label = "base:user2";
+		gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "off";
+	};
+};
+
+&mcasp0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp0_pins_default>;
+	pinctrl-1 = <&mcasp0_pins_sleep>;
+	op-mode = <0>;
+	tdm-slots = <2>;
+	serial-dir = <0 1 2 0>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+	status = "okay";
+
+	#sound-dai-cells = <0>;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_sleep>;
+	cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_3v3>;
+	status = "okay";
+};
+
+&nand0 {
+	nand_parts: partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "MLO";
+			reg = <0x00000 0x20000>;
+		};
+
+		partition@80000 {
+			label = "boot";
+			reg = <0x80000 0x100000>;
+		};
+	};
+};
+
+&tscadc {
+	status = "okay";
+
+	adc: adc {
+		ti,adc-channels = <0 1 2 3 4 5 6>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_pins_default>;
+	pinctrl-1 = <&uart1_pins_sleep>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart2_pins_default>;
+	pinctrl-1 = <&uart2_pins_sleep>;
+	status = "okay";
+};
+
+&usb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_pins>;
+};
+
+&usb0 {
+	dr_mode = "otg";
+};
+
+&usb0_phy {
+	vcc-supply = <&vdd_5v0>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb1_phy {
+	vcc-supply = <&vdd_5v0>;
+};
+
+&vdd_mod {
+	vin-supply = <&vdd_3v3>;
+};
+
+&am33xx_pinmux {
+	dcan0_pins_default: pinmux_dcan0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)			/* dcan0_tx_mux2 */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT, MUX_MODE2)			/* dcan0_rx_mux2 */
+		>;
+	};
+
+	dcan0_pins_sleep: pinmux_dcan0_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	dcan1_pins_default: pinmux_dcan1_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)			/* dcan1_tx_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)			/* dcan1_rx_mux0 */
+		>;
+	};
+
+	dcan1_pins_sleep: pinmux_dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	ehrpwm0_pins_default: pinmux_ehrpwm0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_OUTPUT, MUX_MODE3)			/* ehrpwm0A_mux1 */
+		>;
+	};
+
+	ehrpwm0_pins_sleep: pinmux_ehrpwm0_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	eth_slave2_pins_default: pinmux_eth_slave2_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2		/* rgmii2_rd1 */)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2		/* rgmii2_rd0 */)
+		>;
+	};
+
+	eth_slave2_pins_sleep: pinmux_eth_slave2_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	gpio_buttons_pins: pinmux_gpio_buttons_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* gpio3[0] */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT, MUX_MODE7)			/* gpio0[29] */
+		>;
+	};
+
+	i2c1_pins_default: pinmux_i2c1_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2)	/* I2C1_SDA_mux3 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT | SLEWCTRL_FAST, MUX_MODE2)	/* I2C1_SCL_mux3 */
+		>;
+	};
+
+	i2c1_pins_gpio: pinmux_i2c1_pins_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE7)			/* gpio0[4] */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE7)			/* gpio0[5] */
+		>;
+	};
+
+	i2c1_pins_sleep: pinmux_i2c1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	lcdc_pins_default: pinmux_lcdc_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)			/* lcd_data0 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)			/* lcd_data1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)			/* lcd_data2 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)			/* lcd_data3 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)			/* lcd_data4 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)			/* lcd_data5 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)			/* lcd_data6 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)			/* lcd_data7 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)			/* lcd_data8 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)			/* lcd_data9 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)			/* lcd_data10 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)			/* lcd_data11 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)			/* lcd_data12 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)			/* lcd_data13 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)			/* lcd_data14 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)			/* lcd_data15 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)			/* lcd_vsync */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)			/* lcd_hsync */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)			/* lcd_pclk */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)		/* lcd_ac_bias_en */
+		>;
+	};
+
+	lcdc_pins_sleep: pinmux_lcdc_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)			/* gpio0[27] */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE7)			/* gpio0[3] */
+		>;
+	};
+
+	mcasp0_pins_default: pinmux_mcasp0_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_aclkx_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_fsx_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* mcasp0_axr2_mux0 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* mcasp0_axr1_mux0 */
+		>;
+	};
+
+	mcasp0_pins_sleep: pinmux_mcasp0_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins_default: pinmux_mmc1_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_clk */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)		/* mmc0_cmd */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7)		/* gpio3[21] */
+		>;
+	};
+
+	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)		/* uart0_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* uart0_txd */
+		>;
+	};
+
+	uart1_pins_default: pinmux_uart1_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)		/* uart1_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* uart1_txd */
+		>;
+	};
+
+	uart1_pins_sleep: pinmux_uart1_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	uart2_pins_default: pinmux_uart2_pins_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE6)			/* uart2_rxd_mux1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_OUTPUT, MUX_MODE6)			/* uart2_txd_mux1 */
+		>;
+	};
+
+	uart2_pins_sleep: pinmux_uart2_pins_sleep {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	usb_pins: pinmux_usb_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_USB0_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* USB0_DRVVBUS */
+			AM33XX_PADCONF(AM335X_PIN_USB1_DRVVBUS, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* USB1_DRVVBUS */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 5ed4ca6eaf55..c447aebd8d86 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2013 Newflow Ltd - http://www.newflow.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 /dts-v1/;
 
@@ -19,7 +16,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
@@ -27,7 +24,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		led@0 {
+		led0 {
 			label = "nanobone:green:usr1";
 			gpios = <&gpio1 5 0>;
 			default-state = "off";
@@ -41,121 +38,121 @@
 
 	misc_pins: misc_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_OUTPUT | MUX_MODE7)	/* spi0_cs0.gpio0_5 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)	/* spi0_cs0.gpio0_5 */
 		>;
 	};
 
 	gpmc_pins: gpmc_pins {
 		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x20 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad8.gpmc_ad8 */
-			0x24 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad9.gpmc_ad9 */
-			0x28 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad10.gpmc_ad10 */
-			0x2c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad11.gpmc_ad11 */
-			0x30 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad12.gpmc_ad12 */
-			0x34 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad13.gpmc_ad13 */
-			0x38 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad14.gpmc_ad14 */
-			0x3c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad15.gpmc_ad15 */
-
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0 */
-			0x80 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn1.gpmc_csn1 */
-			0x84 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn2.gpmc_csn2 */
-			0x88 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn3.gpmc_csn3 */
-
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_ben0_cle.gpmc_ben0_cle */
-
-			0xa4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data1.gpmc_a1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data2.gpmc_a2 */
-			0xac (PIN_OUTPUT | MUX_MODE1)		/* lcd_data3.gpmc_a3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data4.gpmc_a4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data5.gpmc_a5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_data6.gpmc_a6 */
-			0xbc (PIN_OUTPUT | MUX_MODE1)		/* lcd_data7.gpmc_a7 */
-
-			0xe0 (PIN_OUTPUT | MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
-			0xe4 (PIN_OUTPUT | MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
-			0xe8 (PIN_OUTPUT | MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE1)		/* lcd_data1.gpmc_a1 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE1)		/* lcd_data2.gpmc_a2 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE1)		/* lcd_data3.gpmc_a3 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE1)		/* lcd_data4.gpmc_a4 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE1)		/* lcd_data5.gpmc_a5 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE1)		/* lcd_data6.gpmc_a6 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE1)		/* lcd_data7.gpmc_a7 */
+
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE1)		/* lcd_vsync.gpmc_a8 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE1)		/* lcd_hsync.gpmc_a9 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE1)		/* lcd_pclk.gpmc_a10 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
 	uart0_pins: uart0_pins {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT | MUX_MODE0)		/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
 
 	uart1_pins: uart1_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE7)		/* uart1_ctsn.uart1_ctsn */
-			0x17c (PIN_OUTPUT | MUX_MODE7)		/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT | MUX_MODE0)		/* uart1_txd.uart1_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
 		>;
 	};
 
 	uart2_pins: uart2_pins {
 		pinctrl-single,pins = <
-			0xc0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* lcd_data8.gpio2[14] */
-			0xc4 (PIN_OUTPUT | MUX_MODE7)		/* lcd_data9.gpio2[15] */
-			0x150 (PIN_INPUT | MUX_MODE1)		/* spi0_sclk.uart2_rxd */
-			0x154 (PIN_OUTPUT | MUX_MODE1)		/* spi0_d0.uart2_txd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data8.gpio2[14] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)		/* lcd_data9.gpio2[15] */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* spi0_sclk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)		/* spi0_d0.uart2_txd */
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0xc8 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data10.uart3_ctsn */
-			0xcc (PIN_OUTPUT | MUX_MODE6)		/* lcd_data11.uart3_rtsn */
-			0x160 (PIN_INPUT | MUX_MODE1)		/* spi0_cs1.uart3_rxd */
-			0x164 (PIN_OUTPUT | MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data10.gpio2[16] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)		/* lcd_data11.gpio2[17] */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE1)		/* spi0_cs1.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT, MUX_MODE1)		/* ecap0_in_pwm0_out.uart3_txd */
 		>;
 	};
 
 	uart4_pins: uart4_pins {
 		pinctrl-single,pins = <
-			0xd0 (PIN_INPUT_PULLUP | MUX_MODE6)	/* lcd_data12.uart4_ctsn */
-			0xd4 (PIN_OUTPUT | MUX_MODE6)		/* lcd_data13.uart4_rtsn */
-			0x168 (PIN_INPUT | MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
-			0x16c (PIN_OUTPUT | MUX_MODE1)		/* uart0_rtsn.uart4_txd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_INPUT_PULLUP, MUX_MODE7)	/* lcd_data12.gpio0[8] */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)		/* lcd_data13.gpio0[9] */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE1)		/* uart0_ctsn.uart4_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE1)		/* uart0_rtsn.uart4_txd */
 		>;
 	};
 
 	uart5_pins: uart5_pins {
 		pinctrl-single,pins = <
-			0xd8 (PIN_INPUT | MUX_MODE4)		/* lcd_data14.uart5_rxd */
-			0x144 (PIN_OUTPUT | MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_INPUT, MUX_MODE4)		/* lcd_data14.uart5_rxd */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT, MUX_MODE3)		/* rmiii1_refclk.uart5_txd */
 		>;
 	};
 
 	mmc1_pins: mmc1_pins {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x1e8 (PIN_INPUT_PULLUP | MUX_MODE7)	/* emu1.gpio3[8] */
-			0x1a0 (PIN_INPUT_PULLUP | MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)	/* mmc0_clk.mmc0_clk */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLUP, MUX_MODE7)	/* emu1.gpio3[8] */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLUP, MUX_MODE7)	/* mcasp0_aclkr.gpio3[18] */
 		>;
 	};
 };
@@ -190,12 +187,22 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
+	rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
@@ -223,8 +230,13 @@
 		reg = <0x24>;
 	};
 
+	temperature-sensor@48 {
+		compatible = "lm75";
+		reg = <0x48>;
+	};
+
 	eeprom@53 {
-		compatible = "microchip,24c02";
+		compatible = "microchip,24c02", "atmel,24c02";
 		reg = <0x53>;
 		pagesize = <8>;
 	};
@@ -241,7 +253,6 @@
 
 &gpmc {
 	compatible = "ti,am3352-gpmc";
-	ti,hwmods = "gpmc";
 	status = "okay";
 	gpmc,num-waitpins = <2>;
 	pinctrl-names = "default";
@@ -249,7 +260,8 @@
 
 	#address-cells = <2>;
 	#size-cells = <1>;
-	ranges = <0 0 0x08000000 0x08000000>;	/* CS0: NOR 128M */
+	ranges = <0 0 0x08000000 0x08000000>,	/* CS0: NOR 128M */
+		 <1 0 0x1c000000 0x01000000>;	/* CS1: FRAM 16M */
 
 	nor@0,0 {
 		reg = <0 0x00000000 0x08000000>;
@@ -342,27 +354,62 @@
 			reg = <0x04000000 0x04000000>; /* 64MB */
 		};
 	};
+
+	fram@1,0 {
+		reg = <1 0x00000000 0x01000000>;
+		bank-width = <2>;
+
+		gpmc,mux-add-data = <2>;
+
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <160>;
+		gpmc,cs-wr-off-ns = <160>;
+		gpmc,adv-on-ns = <10>;
+		gpmc,adv-rd-off-ns = <20>;
+		gpmc,adv-wr-off-ns = <20>;
+		gpmc,oe-on-ns = <30>;
+		gpmc,oe-off-ns = <150>;
+		gpmc,we-on-ns = <30>;
+		gpmc,we-off-ns = <150>;
+		gpmc,rd-cycle-ns = <160>;
+		gpmc,wr-cycle-ns = <160>;
+		gpmc,access-ns = <130>;
+		gpmc,page-burst-access-ns = <10>;
+		gpmc,cycle2cycle-samecsen;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,cycle2cycle-delay-ns = <10>;
+		gpmc,wr-data-mux-bus-ns = <30>;
+		gpmc,wr-access-ns = <0>;
+	};
 };
 
-&mac {
-	dual_emac;
+&mac_sw {
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
 	phy-mode = "mii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
 &mmc1 {
@@ -371,8 +418,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <4>;
-	cd-gpios = <&gpio3 8 0>;
-	wp-gpios = <&gpio3 18 0>;
+	cd-debounce-delay-ms = <5>;
+	cd-gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb0 {
+	dr_mode = "host";
 };
 
 #include "tps65217.dtsi"
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
new file mode 100644
index 000000000000..2e049489ac06
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCAN";
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "can_data";
+			linux,default-trigger = "netdev";
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led@2 {
+			label = "can_error";
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Data LED */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* CAN Error LED */
+		>;
+	};
+
+	dcan1_pins: pinmux_dcan1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2)	/* CAN TX */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2)	/* CAN RX */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"can_data",
+		"can_error",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"DCAN1_TX",
+		"DCAN1_RX",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
new file mode 100644
index 000000000000..6ed886c3306b
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-2xx.dts
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+#include "am335x-baltos-leds.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)			/* RX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)			/* TX */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)		/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)		/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)		/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)		/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)		/* RX */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)      		/* TX */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* CTS */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* RTS */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* DTR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DSR */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* DCD */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* RI */
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	dtr-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"UART2_RX",
+		"UART2_TX",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART1_CTSN",
+		"UART1_RTSN",
+		"UART1_RX",
+		"UART1_TX",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"UART2_DTR",
+		"UART2_DSR",
+		"UART2_DCD",
+		"UART2_RI",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"UART1_DTR",
+		"UART1_DSR",
+		"UART1_DCD",
+		"UART1_RI",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"UART2_CTSN",
+		"UART2_RTSN",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"ModeA0",
+		"ModeA1",
+		"ModeA2",
+		"ModeA3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
new file mode 100644
index 000000000000..ad3adc7679f9
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-netcom-plus-8xx.dts
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * VScom OnRISC
+ * http://www.vscom.de
+ */
+
+/dts-v1/;
+
+#include "am335x-baltos.dtsi"
+
+/ {
+	model = "NetCom Plus";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dip_switches>;
+
+	dip_switches: pinmux_dip_switches {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	tca6416_pins: pinmux_tca6416_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+};
+
+&usb0_phy {
+	status = "okay";
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&i2c1 {
+	tca6416a: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tca6416_pins>;
+		gpio-line-names = "GP_IN0", "GP_IN1", "GP_IN2", "GP_IN3",
+				  "GP_IN4", "GP_IN5", "GP_IN6", "GP_IN7",
+				  "GP_OUT0", "GP_OUT1", "GP_OUT2", "GP_OUT3",
+				  "GP_OUT4", "GP_OUT5", "GP_OUT6", "GP_OUT7";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tca6416b: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CH1_M0", "CH1_M1", "CH1_M2", "CH1_M3",
+				  "CH2_M0", "CH2_M1", "CH2_M2", "CH2_M3",
+				  "CH3_M0", "CH3_M1", "CH3_M2", "CH3_M3",
+				  "CH4_M0", "CH4_M1", "CH4_M2", "CH4_M3";
+	};
+
+	tca6416c: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "CH5_M0", "CH5_M1", "CH5_M2", "CH5_M3",
+				  "CH6_M0", "CH6_M1", "CH6_M2", "CH6_M3",
+				  "CH7_M0", "CH7_M1", "CH7_M2", "CH7_M3",
+				  "CH8_M0", "CH8_M1", "CH8_M2", "CH8_M3";
+	};
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@0 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+	phy-handle = <&phy0>;
+};
+
+&cpsw_port2 {
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	phy-handle = <&phy1>;
+};
+
+&gpio0 {
+	gpio-line-names =
+		"MDIO",
+		"MDC",
+		"NC",
+		"NC",
+		"I2C1_SDA",
+		"I2C1_SCL",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"I2C2_SDA",
+		"I2C2_SCL",
+		"NC",
+		"NC",
+		"onrisc:blue:wlan",
+		"onrisc:green:app",
+		"USB0_DRVVBUS",
+		"ETH2_INT",
+		"NC",
+		"NC",
+		"MMC1_DAT0",
+		"MMC1_DAT1",
+		"NC",
+		"NC",
+		"MMC1_DAT2",
+		"MMC1_DAT3",
+		"NC",
+		"NC",
+		"GPMC_WAIT0",
+		"GPMC_WP_N";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"GPMC_AD0",
+		"GPMC_AD1",
+		"GPMC_AD2",
+		"GPMC_AD3",
+		"GPMC_AD4",
+		"GPMC_AD5",
+		"GPMC_AD6",
+		"GPMC_AD7",
+		"NC",
+		"NC",
+		"CONSOLE_RX",
+		"CONSOLE_TX",
+		"SW2_0_alt",
+		"SW2_1_alt",
+		"SW2_2_alt",
+		"SW2_3_alt",
+		"RGMII2_TCTL",
+		"RGMII2_RCTL",
+		"RGMII2_TD3",
+		"RGMII2_TD2",
+		"RGMII2_TD1",
+		"RGMII2_TD0",
+		"RGMII2_TCLK",
+		"RGMII2_RCLK",
+		"RGMII2_RD3",
+		"RGMII2_RD2",
+		"RGMII2_RD1",
+		"RGMII2_RD0",
+		"PMIC_INT1",
+		"GPMC_CSN0_Flash",
+		"MMC1_CLK",
+		"MMC1_CMD";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"GPMC_CSN3_BUS",
+		"GPMC_CLK",
+		"GPMC_ADVN_ALE",
+		"GPMC_OEN_RE_N",
+		"GPMC_WE_N",
+		"GPMC_BEN0_CLE",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"SW2_0",
+		"SW2_1",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"MMC0_DAT3",
+		"MMC0_DAT2",
+		"MMC0_DAT1",
+		"MMC0_DAT0",
+		"MMC0_CLK",
+		"MMC0_CMD";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"onrisc:red:power",
+		"NC",
+		"NC",
+		"NC",
+		"3G_PWR_EN",
+		"NC",
+		"NC",
+		"WLAN_IRQ",
+		"WLAN_EN",
+		"SW2_2",
+		"SW2_3",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
diff --git a/arch/arm/boot/dts/am335x-osd3358-sm-red.dts b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
new file mode 100644
index 000000000000..b2846cd220f0
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-osd3358-sm-red.dts
@@ -0,0 +1,434 @@
+//SPDX-License-Identifier: GPL-2.0
+/* Copyright (C) 2018 Octavo Systems LLC - https://www.octavosystems.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include <dt-bindings/display/tda998x.h>
+
+/ {
+	model = "Octavo Systems OSD3358-SM-RED";
+	compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&ldo3_reg {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
+
+&mmc2 {
+	vmmc-supply = <&vmmcsd_fixed>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+
+	/* If you want to get 24 bit RGB and 16 BGR mode instead of
+	 * current 16 bit RGB and 24 BGR modes, set the propety
+	 * below to "crossed" and uncomment the video-ports -property
+	 * in tda19988 node.
+	 * AM335x errata for wiring:
+	 * https://www.ti.com/lit/er/sprz360i/sprz360i.pdf
+	 */
+
+	blue-and-red-wiring = "straight";
+
+	port {
+		lcdc_0: endpoint {
+			remote-endpoint = <&hdmi_0>;
+		};
+	};
+};
+
+&i2c0 {
+	tda19988: hdmi-encoder@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
+		pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
+
+		/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
+		/* video-ports = <0x234501>; */
+
+		#sound-dai-cells = <0>;
+		audio-ports = <	TDA998x_I2S	0x03>;
+
+		port {
+			hdmi_0: endpoint {
+				remote-endpoint = <&lcdc_0>;
+			};
+		};
+	};
+
+	mpu9250: imu@68 {
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+		i2c-gate {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ax8975@c {
+				compatible = "asahi-kasei,ak8975";
+				reg = <0x0c>;
+			};
+		};
+		/*invensense,int_config = <0x10>;
+		invensense,level_shifter = <0>;
+		invensense,orientation = [01 00 00 00 01 00 00 00 01];
+		invensense,sec_slave_type = <0>;
+		invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
+	};
+
+	bmp280: pressure@76 {
+		compatible = "bosch,bmp280";
+		reg = <0x76>;
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 1 0
+		>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+/ {
+	clk_mcasp0_fixed: clk-mcasp0-fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24576000>;
+	};
+
+	clk_mcasp0: clk-mcasp0 {
+		#clock-cells = <0>;
+		compatible = "gpio-gate-clock";
+		clocks = <&clk_mcasp0_fixed>;
+		enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "TI BeagleBone Black";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			clocks = <&clk_mcasp0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led2 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT_PULLDOWN, MUX_MODE3)
+		>;
+	};
+
+	mcasp0_pins: mcasp0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* gpmc_a11.GPIO1_27 */
+		>;
+	};
+
+	flash_enable: flash-enable {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* rmii1_ref_clk.gpio0_29 */
+		>;
+	};
+
+	imu_interrupt: imu-interrupt {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_rx_er.gpio3_2 */
+		>;
+	};
+
+	ethernet_interrupt: ethernet-interrupt{
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* mii1_col.gpio3_0 */
+		>;
+	};
+
+	user_leds_s0: user-leds-s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+		>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	uart0_pins: pinmux-uart0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	clkout2_pin: pinmux-clkout2-pin {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw-default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)		/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	cpsw_sleep: cpsw-sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci-mdio-default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci-mdio-sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	mmc1_pins: pinmux-mmc1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	emmc_pins: pinmux-emmc-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	interrupts-extended = <&intc 18 &tps 0>;
+	interrupt-names = "mc", "vbus";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <0x4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+	system-power-controller;
+	clocks = <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
+	clock-names = "ext-clk", "int-clk";
+};
diff --git a/arch/arm/boot/dts/am335x-osd335x-common.dtsi b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
new file mode 100644
index 000000000000..2888b15999ee
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-osd335x-common.dtsi
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&cpu0_opp_table {
+	/*
+	* Octavo Systems:
+	* The EFUSE_SMA register is not programmed for any of the AM335x wafers
+	* we get and we are not programming them during our production test.
+	* Therefore, from a DEVICE_ID revision point of view, the silicon looks
+	* like it is Revision 2.1.  However, from an EFUSE_SMA point of view for
+	* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
+	* EFUSE_SMA register reads as all zeros).
+	*/
+	oppnitro-1000000000 {
+		opp-supported-hw = <0x06 0x0100>;
+	};
+};
+
+&am33xx_pinmux {
+	i2c0_pins: pinmux-i2c0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+};
+
+/include/ "tps65217.dtsi"
+
+&tps {
+	interrupts = <7>; /* NMI */
+	interrupt-parent = <&intc>;
+
+	ti,pmic-shutdown-controller;
+
+	pwrbutton {
+		interrupts = <2>;
+		status = "okay";
+	};
+
+	regulators {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3_reg: regulator@2 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
+			regulator-always-on;
+		};
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-pcm-953.dtsi b/arch/arm/boot/dts/am335x-pcm-953.dtsi
new file mode 100644
index 000000000000..67c7fcc52ce6
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pcm-953.dtsi
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2017 Phytec Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ *	   Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Phytec AM335x PCM-953";
+	compatible = "phytec,am335x-pcm-953", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	/* Power */
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	vcc1v8: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+	};
+
+	/* User IO */
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_pins>;
+
+		user-led0 {
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		user-led1 {
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	user_buttons: user-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_buttons_pins>;
+
+		button-0 {
+			label = "home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+			wakeup-source;
+		};
+
+	};
+};
+
+&am33xx_pinmux {
+	user_buttons_pins: pinmux-user-buttons {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_EMU0, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu0.gpio3_7 */
+			AM33XX_PADCONF(AM335X_PIN_EMU1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* emu1.gpio3_8 */
+		>;
+	};
+
+	user_leds_pins: pinmux-user-leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn1.gpio1_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* gpmc_csn2.gpio1_31 */
+		>;
+	};
+};
+
+/* CAN */
+&am33xx_pinmux {
+	dcan1_pins: pinmux-dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart1_rxd.dcan1_tx_mux2 */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart1_txd.dcan1_rx_mux2 */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux_ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a1.rgmii2_rctl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+		>;
+	};
+};
+
+&cpsw_port2 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	phy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+};
+
+/* Misc */
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cb_gpio_pins>;
+
+	cb_gpio_pins: pinmux-cb-gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_ctsn.gpio1_8 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* uart0_rtsn.gpio1_9 */
+		>;
+	};
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux-mmc1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux-uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux-uart1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux-uart2 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
+		>;
+	};
+
+	uart3_pins: pinmux-uart3 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_rxd3.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rxd2.uart3_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+	status = "okay";
+};
+
+/* USB */
+&usb1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/am335x-pdu001.dts b/arch/arm/boot/dts/am335x-pdu001.dts
new file mode 100644
index 000000000000..ce6cc2b96654
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pdu001.dts
@@ -0,0 +1,573 @@
+/*
+ * pdu001.dts
+ *
+ * EETS GmbH PDU001 board device tree file
+ *
+ * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier:  GPL-2.0+
+ */
+
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/leds-pca9532.h>
+
+/ {
+	model = "EETS,PDU001";
+	compatible = "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins_s0>;
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <16>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+
+		display-timings {
+			240x320p16 {
+				clock-frequency = <6500000>;
+				hactive = <240>;
+				vactive = <320>;
+				hfront-porch = <6>;
+				hback-porch = <6>;
+				hsync-len = <1>;
+				vback-porch = <6>;
+				vfront-porch = <6>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				pixelclk-active = <1>;
+				de-active = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d1.i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_cs0.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_clk.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE2)	/* spi0_d0.i2c2_scl */
+		>;
+	};
+
+	spi1_pins: pinmux_spi1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_aclkx.spi1_sclk */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_fsx.spi1_d0 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE3)	/* mcasp0_axr0.spi1_d1 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT, MUX_MODE3)		/* mcasp0_ahclkr.spi1_cs0 */
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart3_pins: pinmux_uart3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE1)	/* spi0_cs1.uart3_rxd */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* ecap0_in_pwm0_out.uart3_txd */
+		>;
+	};
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Port 1 (emac0) */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT, MUX_MODE0)
+
+			/* Port 2 (emac1) */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* mii2_txen.gpmc_a0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT, MUX_MODE1)		/* mii2_rxdv.gpmc_a1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd3.gpmc_a2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd2.gpmc_a3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd1.gpmc_a4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* mii2_txd0.gpmc_a5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT, MUX_MODE1)		/* mii2_txclk.gpmc_a6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT, MUX_MODE1)		/* mii2_rxclk.gpmc_a7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE1)		/* mii2_rxd3.gpmc_a8 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE1)		/* mii2_rxd2.gpmc_a9 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE1)		/* mii2_rxd1.gpmc_a10 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE1)		/* mii2_rxd0.gpmc_a11 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT, MUX_MODE1)		/* mii2_crs.gpmc_wait0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT, MUX_MODE1)		/* mii2_rxer.gpmc_wpn */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT, MUX_MODE1)		/* mii2_col.gpmc_ben1 */
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		/* eMMC */
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		/* SD cardcage */
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			/* card change signal for frontpanel SD cardcage */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_INPUT, MUX_MODE7)		/* gpmc_advn_ale.gpio2_2 */
+		>;
+	};
+
+	lcd_pins_s0: lcd_pins_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	dcan0_pins: pinmux_dcan0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_OUTPUT, MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rts-delay = <0 0>;
+	linux,rs485-enabled-at-boot-time;
+
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+	};
+
+	m2_eeprom: m2_eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		status = "okay";
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	board_24aa025e48: board_24aa025e48@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	backplane_24aa025e48: backplane_24aa025e48@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+
+	pca9532: pca9532@60 {
+		compatible = "nxp,pca9532";
+		reg = <0x60>;
+		psc0 = <0x97>;
+		pwm0 = <0x80>;
+		psc1 = <0x97>;
+		pwm1 = <0x10>;
+
+		run.red@0 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		run.green@1 {
+			type = <PCA9532_TYPE_LED>;
+			default-state = "on";
+		};
+		s2.red@2 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s2.green@3 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s1.yellow@4 {
+			type = <PCA9532_TYPE_LED>;
+		};
+		s1.green@5 {
+			type = <PCA9532_TYPE_LED>;
+		};
+	};
+
+	pca9530: pca9530@61 {
+		compatible = "nxp,pca9530";
+		reg = <0x61>;
+
+		tft-panel@0 {
+			type = <PCA9532_TYPE_LED>;
+			linux,default-trigger = "backlight";
+			default-state = "on";
+		};
+	};
+
+	mcp79400: rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+
+	display-controller@0 {
+		compatible = "orisetech,otm3225a";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		// SPI mode 3
+		spi-cpol;
+		spi-cpha;
+		status = "okay";
+	};
+};
+
+/*
+ * Disable soc's rtc as we have no VBAT for it. This makes the board
+ * rtc (Microchip MCP79400) the default rtc device 'rtc0'.
+ */
+&rtc {
+	status = "disabled";
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&elm {
+	status = "okay";
+};
+
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-name = "ldo_vrtc";
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-name = "buck_vdd_ddr";
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits */
+			regulator-name = "buck_vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits */
+			regulator-name = "buck_vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-name = "boost_res";
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "ldo_vdig1";
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-name = "ldo_vdig2";
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-name = "ldo_vpll";
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-name = "ldo_vdac";
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-name = "ldo_vaux1";
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-name = "ldo_vaux2";
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-name = "ldo_vaux33";
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-name = "ldo_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		vbb_reg: regulator@13 {
+			regulator-name = "bat_vbb";
+		};
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "mii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "mii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x01 0x10 0x22 0x33>;
+		ti,charge-delay = <0x400>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	non-removable;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+};
+
+&sham {
+	status = "okay";
+};
+
+&aes {
+	status = "okay";
+};
+
+&dcan0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_pins>;
+};
diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts
index 0d35ab64641c..a4509e9e1056 100644
--- a/arch/arm/boot/dts/am335x-pepper.dts
+++ b/arch/arm/boot/dts/am335x-pepper.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 /dts-v1/;
 
@@ -20,7 +17,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x20000000>; /* 512 MB */
 	};
@@ -41,15 +38,15 @@
 		compatible = "ti,da830-evm-audio";
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 	};
 
-	v3v3c_reg: fixedregulator@1 {
+	v3v3c_reg: fixedregulator1 {
 		compatible = "regulator-fixed";
 	};
 
-	vdd5_reg: fixedregulator@2 {
+	vdd5_reg: fixedregulator2 {
 		compatible = "regulator-fixed";
 	};
 };
@@ -67,13 +64,14 @@
 	};
 
 	eeprom: eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
 
 	audio_codec: tlv320aic3106@1b {
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
+		ai3x-micbias-vg = <0x2>;
 	};
 
 	accel: lis331dlh@1d {
@@ -92,14 +90,14 @@
 &am33xx_pinmux {
 	i2c0_pins: pinmux_i2c0 {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 	i2c1_pins: pinmux_i2c1 {
 		pinctrl-single,pins = <
-			0x10C (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_crs,i2c1_sda */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_crs,i2c1_sda */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE3)	/* mii1_rxerr,i2c1_scl */
 		>;
 	};
 };
@@ -129,7 +127,7 @@
 &am33xx_pinmux {
 	accel_pins: pinmux_accel {
 		pinctrl-single,pins = <
-			0x98 (PIN_INPUT | MUX_MODE7)   /* gpmc_wen.gpio2_4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_INPUT, MUX_MODE7)   /* gpmc_wen.gpio2_4 */
 		>;
 	};
 };
@@ -138,7 +136,7 @@
 &audio_codec {
 	status = "okay";
 
-	gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>;
+	reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
 	AVDD-supply = <&ldo3_reg>;
 	IOVDD-supply = <&ldo3_reg>;
 	DRVDD-supply = <&ldo3_reg>;
@@ -153,7 +151,7 @@
 	ti,audio-routing =
 		"Headphone Jack",	"HPLOUT",
 		"Headphone Jack",	"HPROUT",
-		"LINE1L",		"Line In";
+		"MIC3L",		"Mic3L Switch";
 };
 
 &mcasp0 {
@@ -176,12 +174,12 @@
 &am33xx_pinmux {
 	audio_pins: pinmux_audio {
 		pinctrl-single,pins = <
-			0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr1.mcasp0_axr1 */
-			0x40 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a0.gpio1_16 */
 		>;
 	};
 };
@@ -227,92 +225,98 @@
 &am33xx_pinmux {
 	lcd_pins: pinmux_lcd {
 		pinctrl-single,pins = <
-			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15.lcd_data15 */
-			0x20 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en.lcd_ac_bias_en */
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad8.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad9.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad10.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad11.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad12.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad13.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad14.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)	/* gpmc_ad15.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
 			/* Display Enable */
-			0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 };
 
 /* Ethernet */
-&cpsw_emac0 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <0>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	status = "okay";
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mdio_pins>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ethernet_pins>;
 };
 
-
 &am33xx_pinmux {
 	ethernet_pins: pinmux_ethernet {
 		pinctrl-single,pins = <
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd3.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd2.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE2)
 			/* ethernet interrupt */
-			0x144 (PIN_INPUT_PULLUP | MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLUP, MUX_MODE7)	/* rmii2_refclk.gpio0_29 */
 			/* ethernet PHY nReset */
-			0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* mii1_col.gpio3_0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_COL, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* mii1_col.gpio3_0 */
 		>;
 	};
 
 	mdio_pins: pinmux_mdio {
 		pinctrl-single,pins = <
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 };
@@ -335,16 +339,9 @@
 	pinctrl-0 = <&emmc_pins>;
 	vmmc-supply = <&ldo3_reg>;
 	bus-width = <8>;
-	ti,non-removable;
-};
-
-&edma {
-	/* Map eDMA MMC2 Events from Crossbar */
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-                                            2 13>;
+	non-removable;
 };
 
-
 &mmc3 {
 	/* Wifi & Bluetooth on MMC #3 */
 	status = "okay";
@@ -352,9 +349,9 @@
 	pinctrl-0 = <&wireless_pins>;
 	vmmmc-supply = <&v3v3c_reg>;
 	bus-width = <4>;
-	ti,non-removable;
-	dmas = <&edma 12
-		&edma 13>;
+	non-removable;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
 	dma-names = "tx", "rx";
 };
 
@@ -362,45 +359,45 @@
 &am33xx_pinmux {
 	sd_pins: pinmux_sd_card {
 		pinctrl-single,pins = <
-			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat0.mmc0_dat0 */
-			0xf4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat1.mmc0_dat1 */
-			0xf8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat2.mmc0_dat2 */
-			0xfc (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_dat3.mmc0_dat3 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* spi0_cs1.gpio0_6 */
 		>;
 	};
 	emmc_pins: pinmux_emmc {
 		pinctrl-single,pins = <
-			0x80 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			0x84 (PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			0x00 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			0x04 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			0x08 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			0x0c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
 			/* EMMC nReset */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
 		>;
 	};
 	wireless_pins: pinmux_wireless {
 		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a1.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a2.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_a3.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_ben1.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)	/* gpmc_clk.mmc1_clk */
 			/* WLAN nReset */
-			0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 			/* WLAN nPower down */
-			0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_wait0.gpio0_30 */
 			/* 32kHz Clock */
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_OUTPUT_PULLDOWN, MUX_MODE3)	/* xdma_event_intr1.clkout2 */
 		>;
 	};
 };
@@ -438,41 +435,50 @@
 	regulators {
 		dcdc1_reg: regulator@0 {
 			/* VDD_1V8 system supply */
+			regulator-always-on;
 		};
 
 		dcdc2_reg: regulator@1 {
 			/* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
+			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc3_reg: regulator@2 {
 			/* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1_reg: regulator@3 {
 			/* VRTC 1.8V always-on supply */
+			regulator-name = "vrtc,vdds";
 			regulator-always-on;
 		};
 
 		ldo2_reg: regulator@4 {
 			/* 3.3V rail */
+			regulator-name = "vdd_3v3aux";
+			regulator-always-on;
 		};
 
 		ldo3_reg: regulator@5 {
 			/* VDD_3V3A 3.3V rail */
+			regulator-name = "vdd_3v3a";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
 		};
 
 		ldo4_reg: regulator@6 {
 			/* VDD_3V3B 3.3V rail */
+			regulator-name = "vdd_3v3b";
+			regulator-always-on;
 		};
 	};
 };
@@ -487,10 +493,10 @@
 &am33xx_pinmux {
 	spi0_pins: pinmux_spi0 {
 		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */
-			0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
-			0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 };
@@ -528,61 +534,41 @@
 &am33xx_pinmux {
 	uart0_pins: pinmux_uart0 {
 		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 	uart1_pins: pinmux_uart1 {
 		pinctrl-single,pins = <
-			0x178 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 };
 
 /* USB */
 &usb {
-	status = "okay";
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb_pins>;
 };
 
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
 &usb0 {
-	status = "okay";
-        dr_mode = "host";
+	dr_mode = "host";
 };
 
 &usb1 {
-	status = "okay";
-        dr_mode = "host";
-};
-
-&cppi41dma {
-	status = "okay";
+	dr_mode = "host";
 };
 
 &am33xx_pinmux {
 	usb_pins: pinmux_usb {
 		pinctrl-single,pins = <
 			/* USB0 Over-Current (active low) */
-			0x64 (PIN_INPUT | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)	/* gpmc_a9.gpio1_25 */
 			/* USB1 Over-Current (active low) */
-			0x68 (PIN_INPUT | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)	/* gpmc_a10.gpio1_26 */
 		>;
 	};
 };
@@ -592,14 +578,14 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_leds_pins>;
 
-	led@0 {
+	led0 {
 		label = "pepper:user0:blue";
 		gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
 		default-state = "off";
 	};
 
-	led@1 {
+	led1 {
 		label = "pepper:user1:red";
 		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 		linux,default-trigger = "none";
@@ -610,44 +596,42 @@
 &buttons {
 	pinctrl-names = "default";
 	pinctrl-0 = <&user_buttons_pins>;
-	#address-cells = <1>;
-	#size-cells = <0>;
 
-	button@0 {
+	button-0 {
 		label = "home";
 		linux,code = <KEY_HOME>;
 		gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 
-	button@1 {
+	button-1 {
 		label = "menu";
 		linux,code = <KEY_MENU>;
 		gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 
-	buttons@2 {
+	button-2 {
 		label = "power";
 		linux,code = <KEY_POWER>;
 		gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
-		gpio-key,wakeup;
+		wakeup-source;
 	};
 };
 
 &am33xx_pinmux {
 	user_leds_pins: pinmux_user_leds {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
-			0x54 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
 		>;
 	};
 
 	user_buttons_pins: pinmux_user_buttons {
 		pinctrl-single,pins = <
-			0x58 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x5C (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a7.gpio1_21 */
-			0x164 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a8.gpio0_7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a7.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE7)	/* gpmc_a8.gpio0_7 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am335x-phycore-rdk.dts b/arch/arm/boot/dts/am335x-phycore-rdk.dts
new file mode 100644
index 000000000000..43907d03e675
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-phycore-rdk.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 PHYTEC Messtechnik GmbH
+ * Author: Wadim Egorov <w.egorov@phytec.de>
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-pcm-953.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&serial_flash {
+	status = "okay";
+
+};
diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi
new file mode 100644
index 000000000000..034dc5181679
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi
@@ -0,0 +1,343 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Phytec AM335x phyCORE";
+	compatible = "phytec,am335x-phycore-som", "ti,am33xx";
+
+	aliases {
+		rtc0 = &i2c_rtc;
+		rtc1 = &rtc;
+		rtc2 = &tps;
+	};
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	vcc5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+/* Crypto Module */
+&aes {
+	status = "okay";
+};
+
+&sham {
+	status = "okay";
+};
+
+/* EMMC */
+&am33xx_pinmux {
+	emmc_pins: pinmux-emmc-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+		>;
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_reg>;
+	bus-width = <8>;
+	non-removable;
+	status = "disabled";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet0_pins: pinmux_ethernet0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	mdio_pins: pinmux_mdio {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rmii";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins>;
+	status = "okay";
+};
+
+/* I2C Busses */
+&am33xx_pinmux {
+	i2c0_pins: pinmux-i2c0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	tps: pmic@2d {
+		reg = <0x2d>;
+	};
+
+	i2c_tmp102: temp@4b {
+		compatible = "ti,tmp102";
+		reg = <0x4b>;
+		status = "disabled";
+	};
+
+	i2c_eeprom: eeprom@52 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+		status = "disabled";
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		reg = <0x68>;
+		status = "disabled";
+	};
+};
+
+/* NAND memory */
+&am33xx_pinmux {
+		nandflash_pins: pinmux-nandflash {
+			pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
+	ranges = <0 0 0x08000000 0x1000000>;   /* CS0: NAND */
+	nandflash: nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
+		nand-bus-width = <8>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <30>;
+		gpmc,cs-wr-off-ns = <30>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <30>;
+		gpmc,adv-wr-off-ns = <30>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <10>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <30>;
+		gpmc,wr-cycle-ns = <30>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <50>;
+		gpmc,cycle2cycle-diffcsen;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <30>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		ti,elm-id = <&elm>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+/* Power */
+#include "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vcc5v>;
+	vcc2-supply = <&vcc5v>;
+	vcc3-supply = <&vcc5v>;
+	vcc4-supply = <&vcc5v>;
+	vcc5-supply = <&vcc5v>;
+	vcc6-supply = <&vcc5v>;
+	vcc7-supply = <&vcc5v>;
+	vccio-supply = <&vcc5v>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-name = "vdig1_1p8v";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* SPI Busses */
+&am33xx_pinmux {
+	spi0_pins: pinmux-spi0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	serial_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <48000000>;
+		reg = <0x0>;
+		m25p,fast-read;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts
new file mode 100644
index 000000000000..0ba4883cd4ef
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Author: Robert Nelson <robertcnelson@gmail.com>
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-osd335x-common.dtsi"
+
+/ {
+	model = "TI AM335x PocketBeagle";
+	compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usr_leds_pins>;
+
+		compatible = "gpio-leds";
+
+		led-usr0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led-usr1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led-usr2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led-usr3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"P1.08 [SPI0_CLK]",
+		"P1.10 [SPI0_MISO]",
+		"P1.12 [SPI0_MOSI]",
+		"P1.06 [SPI0_CS]",
+		"[MMC0_CD]",
+		"P2.29 [SPI1_CLK]",
+		"[SYSBOOT 12]",
+		"[SYSBOOT 13]",
+		"[SYSBOOT 14]",
+		"[SYSBOOT 15]",
+		"P1.26 [I2C2_SDA]",
+		"P1.28 [I2C2_SCL]",
+		"P2.11 [I2C1_SDA]",
+		"P2.09 [I2C1_SCL]",
+		"NC",
+		"NC",
+		"NC",
+		"P2.31 [SPI1_CS]",
+		"P1.20 [PRU0.16]",
+		"NC",
+		"NC",
+		"P2.03",
+		"NC",
+		"NC",
+		"P1.34",
+		"P2.19",
+		"NC",
+		"NC",
+		"P2.05 [UART4_RX]",
+		"P2.07 [UART4_TX]";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"P2.25 [SPI1_MOSI]",
+		"P1.32 [UART0_RX]",
+		"P1.30 [UART0_TX]",
+		"P2.24",
+		"P2.33",
+		"P2.22",
+		"P2.18",
+		"NC",
+		"NC",
+		"P2.01 [PWM1A]",
+		"NC",
+		"P2.10",
+		"[USR LED 0]",
+		"[USR LED 1]",
+		"[USR LED 2]",
+		"[USR LED 3]",
+		"P2.06",
+		"P2.04",
+		"P2.02",
+		"P2.08",
+		"NC",
+		"NC",
+		"NC";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"P2.20",
+		"P2.17",
+		"NC",
+		"NC",
+		"NC",
+		"[EEPROM_WP]",
+		"[SYSBOOT 0]",
+		"[SYSBOOT 1]",
+		"[SYSBOOT 2]",
+		"[SYSBOOT 3]",
+		"[SYSBOOT 4]",
+		"[SYSBOOT 5]",
+		"[SYSBOOT 6]",
+		"[SYSBOOT 7]",
+		"[SYSBOOT 8]",
+		"[SYSBOOT 9]",
+		"[SYSBOOT 10]",
+		"[SYSBOOT 11]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"P2.35 [AIN5]",
+		"P1.02 [AIN6]",
+		"P1.35 [PRU1.10]",
+		"P1.04 [PRU1.11]",
+		"[MMC0_DAT3]",
+		"[MMC0_DAT2]",
+		"[MMC0_DAT1]",
+		"[MMC0_DAT0]",
+		"[MMC0_CLK]",
+		"[MMC0_CMD]";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"[I2C0_SDA]",
+		"[I2C0_SCL]",
+		"[JTAG EMU0]",
+		"[JTAG EMU1]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"P1.03 [USB1]",
+		"P1.36 [PWM0A]",
+		"P1.33 [PRU0.1]",
+		"P2.32 [PRU0.2]",
+		"P2.30 [PRU0.3]",
+		"P1.31 [PRU0.4]",
+		"P2.34 [PRU0.5]",
+		"P2.28 [PRU0.6]",
+		"P1.29 [PRU0.7]",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC",
+		"NC";
+};
+
+&am33xx_pinmux {
+
+	compatible = "pinconf-single";
+	pinctrl-names = "default";
+
+	pinctrl-0 =   < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
+			&P2_33_gpio &P2_22_gpio &P2_18_gpio &P2_10_gpio
+			&P2_06_gpio &P2_04_gpio &P2_02_gpio &P2_08_gpio
+			&P2_17_gpio >;
+
+	/* P2_03 (ZCZ ball T10) gpio0_23 0x824 PIN 9 */
+	P2_03_gpio: pinmux_P2_03_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P1_34 (ZCZ ball T11) gpio0_26 0x828 PIN 10 */
+	P1_34_gpio: pinmux_P1_34_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_19 (ZCZ ball U12) gpio0_27 0x82c PIN 11 */
+	P2_19_gpio: pinmux_P2_19_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_24 (ZCZ ball T12) gpio1_12 0x830 PIN 12 */
+	P2_24_gpio: pinmux_P2_24_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_33 (ZCZ ball R12) gpio1_13 0x834 PIN 13 */
+	P2_33_gpio: pinmux_P2_33_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_22 (ZCZ ball V13) gpio1_14 0x838 PIN 14 */
+	P2_22_gpio: pinmux_P2_22_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_18 (ZCZ ball U13) gpio1_15 0x83c PIN 15 */
+	P2_18_gpio: pinmux_P2_18_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_10 (ZCZ ball R14) gpio1_20 0x850 PIN 20 */
+	P2_10_gpio: pinmux_P2_10_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_06 (ZCZ ball U16) gpio1_25 0x864 PIN 25 */
+	P2_06_gpio: pinmux_P2_06_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_04 (ZCZ ball T16) gpio1_26 0x868 PIN 26 */
+	P2_04_gpio: pinmux_P2_04_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_02 (ZCZ ball V17) gpio1_27 0x86c PIN 27 */
+	P2_02_gpio: pinmux_P2_02_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	/* P2_08 (ZCZ ball U18) gpio1_28 0x878 PIN 30 */
+	P2_08_gpio: pinmux_P2_08_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x00  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x00  0x00  0x10  0x18>;
+	};
+
+	/* P2_17 (ZCZ ball V12) gpio2_1 0x88c PIN 35 */
+	P2_17_gpio: pinmux_P2_17_gpio {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+		pinctrl-single,bias-pullup   =   < 0x10  0x10  0x00  0x18>;
+		pinctrl-single,bias-pulldown   = < 0x10  0x00  0x10  0x18>;
+	};
+
+	i2c2_pins: pinmux-i2c2-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D17) uart1_rtsn.I2C2_SCL */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* (D18) uart1_ctsn.I2C2_SDA */
+		>;
+	};
+
+	ehrpwm0_pins: pinmux-ehrpwm0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* (A13) mcasp0_aclkx.ehrpwm0A */
+		>;
+	};
+
+	ehrpwm1_pins: pinmux-ehrpwm1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U14) gpmc_a2.ehrpwm1A */
+		>;
+	};
+
+	mmc0_pins: pinmux-mmc0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE7)		/* (C15) spi0_cs1.gpio0[6] */
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	spi0_pins: pinmux-spi0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	spi1_pins: pinmux-spi1-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4)	/* (C18) eCAP0_in_PWM0_out.spi1_sclk */
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E18) uart0_ctsn.spi1_d0 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4)	/* (E17) uart0_rtsn.spi1_d1 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE4)	/* (A15) xdma_event_intr0.spi1_cs1 */
+		>;
+	};
+
+	usr_leds_pins: pinmux-usr-leds-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)		/* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)		/* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)		/* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)		/* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
+		>;
+	};
+
+	uart0_pins: pinmux-uart0-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart4_pins: pinmux-uart4-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* (T17) gpmc_wait0.uart4_rxd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* (U17) gpmc_wpn.uart4_txd */
+		>;
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ehrpwm0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm0_pins>;
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&ehrpwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ehrpwm1_pins>;
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&rtc {
+	system-power-controller;
+};
+
+&tscadc {
+	status = "okay";
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+		ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
+		ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
+		ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "otg";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/am335x-regor-rdk.dts b/arch/arm/boot/dts/am335x-regor-rdk.dts
new file mode 100644
index 000000000000..66a1360b83d5
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-regor-rdk.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-regor.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&serial_flash {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-regor.dtsi b/arch/arm/boot/dts/am335x-regor.dtsi
new file mode 100644
index 000000000000..3894f14a914c
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-regor.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ *
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-REGOR";
+	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	vcc3v3: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	/* User IO */
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_pins>;
+
+		run_stop-led {
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		error-led {
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+};
+
+/* User Leds */
+&am33xx_pinmux {
+	user_leds_pins: pinmux-user-leds {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* lcd_hsync.gpio2_22 */
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_OUTPUT_PULLDOWN, MUX_MODE7)	/* mcasp0_fsx.gpio3_15 */
+		>;
+	};
+};
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux-dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2)	/* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2)	/* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux-ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	 /* gpmc_a9.mii2_rxd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_port2 {
+	status = "okay";
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+};
+
+/* GPIOs */
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&user_gpios_pins>;
+
+	user_gpios_pins: pinmux-user-gpios {
+		pinctrl-single,pins = <
+			/* DIGIN 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT, MUX_MODE7)		/* gpmc_ad11.gpio0_27 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT, MUX_MODE7)		/* gpmc_ad10.gpio0_26 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT, MUX_MODE7)		/* gpmc_ad9.gpio0_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT, MUX_MODE7)		/* gpmc_ad8.gpio0_22 */
+			/* DIGOUT 1-4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad15.gpio1_15 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad14.gpio1_14 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad13.gpio1_13 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE7)		/* gpmc_ad12.gpio1_12 */
+		>;
+	};
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux-mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* RTC */
+&i2c_rtc {
+	status = "okay";
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux-uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux-uart2 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE1)	/* mii1_tx_clk.uart2_rxd */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE1)	/* mii1_rx_clk.uart2_txd */
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+/* RS485 - UART1 */
+&am33xx_pinmux {
+	uart1_rs485_pins: pinmux-uart1-rs485-pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_rs485_pins>;
+	status = "okay";
+	linux,rs485-enabled-at-boot-time;
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
new file mode 100644
index 000000000000..f9b7e774ac48
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-common.dtsi
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&am33xx_pinmux {
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd3.rgmii1_td3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd2.rgmii1_td2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_OUTPUT_PULLDOWN, MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxclk.rgmii1_rclk */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd3.rgmii1_rd3 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd2.rgmii1_rd2 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	usb_hub_ctrl: usb_hub_ctrl {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_OUTPUT_PULLUP, MUX_MODE7)     /* rmii1_refclk.gpio0_29 */
+		>;
+	};
+};
+
+&mac_sw {
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_port1 {
+	phy-mode = "rgmii-id";
+};
+
+&i2c0 {
+	usb2512b: usb-hub@2c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_hub_ctrl>;
+		compatible = "microchip,usb2512b";
+		reg = <0x2c>;
+		reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
new file mode 100644
index 000000000000..a2676d10c24a
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-extended-wifi.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2021 Sancloud Ltd
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SanCloud BeagleBone Enhanced Extended WiFi";
+	compatible = "sancloud,am335x-boneenhanced",
+		     "ti,am335x-bone-black",
+		     "ti,am335x-bone",
+		     "ti,am33xx";
+
+	wlan_en_reg: fixedregulator@2 {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+	};
+};
+
+&am33xx_pinmux {
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			/* gpmc_a9.gpio1_25: RADIO_EN */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_OUTPUT_PULLUP, MUX_MODE7)
+
+			/* gpmc_ad12.mmc2_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad13.mmc2_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad14.mmc2_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_ad15.mmc2_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_csn3.mmc2_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT_PULLUP, MUX_MODE3)
+
+			/* gpmc_clk.mmc2_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT_PULLUP, MUX_MODE3)
+		>;
+	};
+
+	bluetooth_pins: pinmux_bluetooth_pins {
+		pinctrl-single,pins = <
+			/* event_intr0.gpio0_19 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1_pins {
+		pinctrl-single,pins = <
+			/* uart1_rxd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_INPUT, MUX_MODE0)
+
+			/* uart1_ctsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+
+			/* uart1_rtsn */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "okay";
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	ti,needs-special-hs-handling;
+	keep-power-in-suspend;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	dmas = <&edma_xbar 12 0 1
+		&edma_xbar 13 0 2>;
+	dma-names = "tx", "rx";
+	clock-frequency = <50000000>;
+	max-frequency = <50000000>;
+};
+
+&uart1 {
+	status = "okay";
+
+	bluetooth {
+		pinctrl-names = "default";
+		pinctrl-0 = <&uart1_pins &bluetooth_pins>;
+		compatible = "qcom,qca6174-bt";
+		enable-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+		clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <19 IRQ_TYPE_EDGE_RISING>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
new file mode 100644
index 000000000000..d6ef19311a91
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe-lite.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2021 SanCloud Ltd
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+
+/ {
+	model = "SanCloud BeagleBone Enhanced Lite";
+	compatible = "sancloud,am335x-boneenhanced",
+		     "ti,am335x-bone-black",
+		     "ti,am335x-bone",
+		     "ti,am33xx";
+};
+
+&am33xx_pinmux {
+	bb_spi0_pins: pinmux_bb_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+};
+
+&spi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&bb_spi0_pins>;
+
+	channel@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "micron,spi-authenta";
+
+		reg = <0>;
+		spi-max-frequency = <16000000>;
+		spi-cpha;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sancloud-bbe.dts b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
new file mode 100644
index 000000000000..efbe93135dbe
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sancloud-bbe.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include "am335x-bone-common.dtsi"
+#include "am335x-boneblack-common.dtsi"
+#include "am335x-boneblack-hdmi.dtsi"
+#include "am335x-sancloud-bbe-common.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "SanCloud BeagleBone Enhanced";
+	compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
+};
+
+&am33xx_pinmux {
+	mpu6050_pins: pinmux_mpu6050_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT, MUX_MODE7)    /* uart0_ctsn.gpio1_8 */
+		>;
+	};
+
+	lps3331ap_pins: pinmux_lps3331ap_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)     /* gpmc_a10.gpio1_26 */
+		>;
+	};
+};
+
+&i2c0 {
+	lps331ap: barometer@5c {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lps3331ap_pins>;
+		compatible = "st,lps331ap-press";
+		st,drdy-int-pin = <1>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	mpu6050: accelerometer@68 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpu6050_pins>;
+		compatible = "invensense,mpu6050";
+		reg = <0x68>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+		orientation = <0xff 0 0 0 1 0 0 0 0xff>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sbc-t335.dts b/arch/arm/boot/dts/am335x-sbc-t335.dts
new file mode 100644
index 000000000000..81e4453687ba
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-sbc-t335.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * am335x-sbc-t335.dts - Device Tree file for Compulab SBC-T335
+ *
+ * Copyright (C) 2014 - 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ */
+
+#include "am335x-cm-t335.dts"
+
+/ {
+	model = "CompuLab CM-T335 on SB-T335";
+	compatible = "compulab,sbc-t335", "compulab,cm-t335", "ti,am33xx";
+
+	/* DRM display driver */
+	panel {
+		compatible = "ti,tilcdc,panel";
+		status = "okay";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&lcd_pins_default>;
+		pinctrl-1 = <&lcd_pins_sleep>;
+
+		panel-info {
+			ac-bias           = <255>;
+			ac-bias-intrpt    = <0>;
+			dma-burst-sz      = <16>;
+			bpp               = <32>;
+			fdd               = <0x80>;
+			sync-edge         = <0>;
+			sync-ctrl         = <1>;
+			raster-order      = <0>;
+			fifo-th           = <0>;
+		};
+		display-timings {
+			/* Timing selection performed by U-Boot */
+			timing0: lcd {/* 800x480p62 */
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <39>;
+				hback-porch = <39>;
+				hsync-len = <47>;
+				vback-porch = <29>;
+				vfront-porch = <13>;
+				vsync-len = <2>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+			timing1: dvi { /* 1024x768p60 */
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				hfront-porch = <24>;
+				hback-porch = <160>;
+				hsync-len = <136>;
+				vactive = <768>;
+				vfront-porch = <3>;
+				vback-porch = <29>;
+				vsync-len = <6>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+			};
+		};
+	};
+};
+
+&am33xx_pinmux {
+	/* Display */
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_OUTPUT, MUX_MODE1)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_OUTPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	lcd_pins_sleep: lcd_pins_sleep {
+		pinctrl-single,pins = <
+			/* gpmc_ad8.lcd_data23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad9.lcd_data22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad10.lcd_data21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad11.lcd_data20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad12.lcd_data19 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad13.lcd_data18 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad14.lcd_data17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			/* gpmc_ad15.lcd_data16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PULL_DISABLE, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+};
+
+&i2c0 {
+	/* GPIO extender */
+	gpio_ext: pca9555@26 {
+		compatible = "nxp,pca9555";
+		pinctrl-names = "default";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x26>;
+		dvi-ena-hog {
+			gpio-hog;
+			gpios = <13 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "dvi-enable";
+		};
+		lcd-ena-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "lcd-enable";
+		};
+	};
+};
+
+/* Display */
+&lcdc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-shc.dts b/arch/arm/boot/dts/am335x-shc.dts
new file mode 100644
index 000000000000..c497200f9cb0
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-shc.dts
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * support for the bosch am335x based shc c3 board
+ *
+ * Copyright, C) 2015 Heiko Schocher <hs@denx.de>
+ *
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Bosch SHC";
+	compatible = "ti,am335x-shc", "ti,am335x-bone", "ti,am33xx";
+
+	aliases {
+		mmcblk0 = &mmc1;
+		mmcblk1 = &mmc2;
+	};
+
+	cpus {
+		cpu@0 {
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				594000  1225000
+				294000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		back-button {
+			label = "Back Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_BACK>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+
+		front-button {
+			label = "Front Button";
+			gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_FRONT>;
+			debounce-interval = <1000>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "shc:power:red";
+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "shc:power:bl";
+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+			default-state = "on";
+		};
+
+		led3 {
+			label = "shc:lan:red";
+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led4 {
+			label = "shc:lan:bl";
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led5 {
+			label = "shc:cloud:red";
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led6 {
+			label = "shc:cloud:bl";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&aes {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+
+	ehrpwm1: pwm@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm1_pins>;
+		status = "okay";
+	};
+};
+
+&gpio1 {
+	hmtc-rst-hog {
+		gpio-hog;
+		gpios = <24 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_reset";
+	};
+
+	hmtc-prog-hog {
+		gpio-hog;
+		gpios = <27 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "homematic_program";
+	};
+};
+
+&gpio3 {
+	zgb-rst-hog {
+		gpio-hog;
+		gpios = <18 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "zigbee_reset";
+	};
+
+	zgb-boot-hog {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "zigbee_boot";
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@24 {
+		reg = <0x24>;
+	};
+
+	at24@50 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-mode = "mii";
+	phy-handle = <&ethernetphy0>;
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+
+	ethernetphy0: ethernet-phy@0 {
+		reg = <0>;
+		smsc,disable-energy-detect;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	bus-width = <0x4>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	cd-inverted;
+	max-frequency = <26000000>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	bus-width = <8>;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+	bus-width = <4>;
+	cap-power-off-card;
+	max-frequency = <26000000>;
+	sd-uhs-sdr25;
+	vmmc-supply = <&vmmcsd_fixed>;
+	status = "okay";
+};
+
+&rtc {
+	ti,no-init;
+};
+
+&sham {
+	status = "okay";
+};
+
+&tps {
+	compatible = "ti,tps65217";
+	ti,pmic-shutdown-controller;
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dcdc1_reg: regulator@0 {
+			reg = <0>;
+			regulator-name = "vdds_dpr";
+			regulator-compatible = "dcdc1";
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2_reg: regulator@1 {
+			reg = <1>;
+			/*
+			 * VDD_MPU voltage limits 0.95V - 1.26V with
+			 * +/-4% tolerance
+			 */
+			regulator-compatible = "dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1375000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-ramp-delay = <70000>;
+		};
+
+		dcdc3_reg: regulator@2 {
+			reg = <2>;
+			/*
+			 * VDD_CORE voltage limits 0.95V - 1.1V with
+			 * +/-4% tolerance
+			 */
+			regulator-name = "vdd_core";
+			regulator-compatible = "dcdc3";
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1125000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1_reg: regulator@3 {
+			reg = <3>;
+			regulator-name = "vio,vrtc,vdds";
+			regulator-compatible = "ldo1";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo2_reg: regulator@4 {
+			reg = <4>;
+			regulator-name = "vdd_3v3aux";
+			regulator-compatible = "ldo2";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		ldo3_reg: regulator@5 {
+			reg = <5>;
+			regulator-name = "vdd_1v8";
+			regulator-compatible = "ldo3";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		ldo4_reg: regulator@6 {
+			reg = <6>;
+			regulator-name = "vdd_3v3a";
+			regulator-compatible = "ldo4";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&am33xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&clkout2_pin>;
+
+	clkout2_pin: pinmux_clkout2_pin {
+		pinctrl-single,pins = <
+			/* xdma_event_intr1.clkout2 */
+			AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR1, PIN_INPUT, MUX_MODE6)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
+		>;
+	};
+
+	ehrpwm1_pins: pinmux_ehrpwm1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6) /* gpmc_a3.gpio1_19 */
+		>;
+	};
+
+	emmc_pins: pinmux_emmc_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)
+		>;
+	};
+
+	i2c0_pins: pinmux_i2c0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT, MUX_MODE0)
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT, MUX_MODE5)
+		>;
+	};
+
+	mmc3_pins: pinmux_mmc3_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN3, PIN_INPUT, MUX_MODE3)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CLK, PIN_INPUT, MUX_MODE3)
+		>;
+	};
+
+	uart0_pins: pinmux_uart0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux_uart1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT, MUX_MODE0)
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT, MUX_MODE1)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_OUTPUT, MUX_MODE1)
+		>;
+	};
+
+	uart4_pins: pinmux_uart4_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLUP, MUX_MODE6)
+		>;
+	};
+
+	user_leds_s0: user_leds_s0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD11, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_OUTPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN0, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_ADVN_ALE, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_OEN_REN, PIN_INPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN0_CLE, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_OUTPUT, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_OUTPUT_PULLUP, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSR, PIN_OUTPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLUP, MUX_MODE7)
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 3303c281697b..73b5d1a024bd 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -1,13 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2015 Toby Churchill - http://www.toby-churchill.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Toby Churchill SL50 Series";
@@ -19,31 +18,40 @@
 		};
 	};
 
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pins>;
 
-		led@0 {
-			label = "sl50:green:usr0";
+		led0 {
+			label = "sl50:red:usr0";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@1 {
-			label = "sl50:red:usr1";
+		led1 {
+			label = "sl50:green:usr1";
 			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@2 {
-			label = "sl50:green:usr2";
+		led2 {
+			label = "sl50:red:usr2";
 			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		led@3 {
-			label = "sl50:red:usr3";
+		led3 {
+			label = "sl50:green:usr3";
 			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
@@ -51,29 +59,131 @@
 
 	backlight0: disp0 {
 		compatible = "pwm-backlight";
-		pwms = <&ehrpwm1 0 500000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight0_pins>;
+		pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_sys_reg>;
 	};
 
 	backlight1: disp1 {
 		compatible = "pwm-backlight";
-		pwms = <&ehrpwm1 1 500000 0>;
-		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-		default-brightness-level = <6>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&backlight1_pins>;
+		pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_sys_reg>;
+	};
+
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* audio external oscillator */
+		audio_mclk_fixed: oscillator@0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;	/* 24.576MHz */
+		};
+
+		audio_mclk: audio_mclk_gate@0 {
+			compatible = "gpio-gate-clock";
+			#clock-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&audio_mclk_pins>;
+			clocks = <&audio_mclk_fixed>;
+			enable-gpios = <&gpio1 27 0>;
+		};
+	};
+
+	panel: lcd_panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		panel-info {
+			ac-bias = <255>;
+			ac-bias-intrpt = <0>;
+			dma-burst-sz = <16>;
+			bpp = <16>;
+			fdd = <0x80>;
+			tft-alt-mode = <0>;
+			mono-8bit-mode = <0>;
+			sync-edge = <0>;
+			sync-ctrl = <1>;
+			raster-order = <0>;
+			fifo-th = <0>;
+		};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 960x128 {
+				clock-frequency = <18000000>;
+				hactive = <960>;
+				vactive = <272>;
+
+				hback-porch = <40>;
+				hfront-porch = <16>;
+				hsync-len = <24>;
+				hsync-active = <0>;
+
+				vback-porch = <3>;
+				vfront-porch = <8>;
+				vsync-len = <4>;
+				vsync-active = <0>;
+			};
+		};
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-SL50";
-		ti,audio-codec = <&audio_codec>;
-		ti,mcasp-controller = <&mcasp0>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",	"HPLOUT",
-			"Headphone Jack",	"HPROUT",
-			"LINE1R",               "Line In",
-			"LINE1L",		"Line In";
+		compatible = "audio-graph-card";
+		label = "sound-card";
+		pinctrl-names = "default";
+		pinctrl-0 = <&audio_pa_pins>;
+
+		widgets = "Headphone", "Headphone Jack",
+			  "Speaker", "Speaker External",
+			  "Line", "Line In",
+			  "Microphone", "Microphone Jack";
+
+		routing = "Headphone Jack",	"HPLOUT",
+			  "Headphone Jack",	"HPROUT",
+			  "Amplifier",		"MONO_LOUT",
+			  "Speaker External",	"Amplifier",
+			  "LINE1R",		"Line In",
+			  "LINE1L",		"Line In",
+			  "MIC3L",		"Microphone Jack",
+			  "MIC3R",		"Microphone Jack",
+			  "Microphone Jack",	"Mic Bias";
+
+		dais = <&cpu_port>;
+
+		pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
 	};
 
 	emmc_pwrseq: pwrseq@0 {
@@ -83,7 +193,15 @@
 		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 	};
 
-	vmmcsd_fixed: fixedregulator@0 {
+	vdd_sys_reg: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_sys_reg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
@@ -95,163 +213,229 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&lwb_pins>;
 
+	audio_pins: pinmux_audio_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKR, PIN_OUTPUT_PULLDOWN, MUX_MODE2)
+		>;
+	};
+
+	audio_pa_pins: pinmux_audio_pa_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* SoundPA_en - mcasp0_aclkr.gpio3_18 */
+		>;
+	};
+
+	audio_mclk_pins: pinmux_audio_mclk_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* gpmc_a11.gpio1_27 */
+		>;
+	};
+
+	backlight0_pins: pinmux_backlight0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WEN, PIN_OUTPUT, MUX_MODE7)	/* gpmc_wen.gpio2_4 */
+		>;
+	};
+
+	backlight1_pins: pinmux_backlight1_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD10, PIN_OUTPUT, MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
+		>;
+	};
+
+	lcd_pins: pinmux_lcd_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA0, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA1, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA2, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA3, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA4, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA5, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA6, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA7, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA8, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA9, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA10, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA11, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA12, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA13, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA14, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_DATA15, PIN_OUTPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_VSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_HSYNC, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_PCLK, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_LCD_AC_BIAS_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
 	led_pins: pinmux_led_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a7.gpio1_23 */
-			AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7)	/* gpmc_a8.gpio1_24 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a6.gpio1_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a7.gpio1_23 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_OUTPUT, MUX_MODE7)	/* gpmc_a8.gpio1_24 */
 		>;
 	};
 
 	uart0_pins: pinmux_uart0_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	uart4_pins: pinmux_uart4_pins {
+	uart1_pins: pinmux_uart1_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
-			AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6)	/* gpmc_wpn.uart4_txd */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 
-	i2c0_pins: pinmux_i2c0_pins {
+	uart4_pins: pinmux_uart4_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WAIT0, PIN_INPUT_PULLUP, MUX_MODE6)	/* gpmc_wait0.uart4_rxd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_OUTPUT_PULLDOWN, MUX_MODE6)	/* gpmc_wpn.uart4_txd */
 		>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
+	i2c0_pins: pinmux_i2c0_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rxd.i2c1_sda */
-			AM33XX_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_txdi2c1_scl */
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SDA, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_I2C0_SCL, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	i2c2_pins: pinmux_i2c2_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
-			AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_INPUT_PULLUP, MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxerr.mii1_rxerr */
-			AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txen.mii1_txen */
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxdv.mii1_rxdv */
-			AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd3.mii1_txd3 */
-			AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd2.mii1_txd2 */
-			AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd1.mii1_txd1 */
-			AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* mii1_txd0.mii1_txd0 */
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_txclk.mii1_txclk */
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxclk.mii1_rxclk */
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd3.mii1_rxd3 */
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd2.mii1_rxd2 */
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd1.mii1_rxd1 */
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLUP | MUX_MODE0)	/* mii1_rxd0.mii1_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE0)
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_DV, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_TX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RX_CLK, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD3, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD2, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLUP | SLEWCTRL_FAST, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			/* Ethernet */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD14, PIN_INPUT_PULLUP, MUX_MODE7)	/* Ethernet_nRST - gpmc_ad14.gpio1_14 */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
-			AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDIO, PIN_INPUT_PULLDOWN, MUX_MODE7)
+			AM33XX_PADCONF(AM335X_PIN_MDC, PIN_INPUT_PULLDOWN, MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7)		/* spi0_cs1.gpio0_6 */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE7)		/* uart0_rtsn.gpio1_9 */
 		>;
 	};
 
 	emmc_pwrseq_pins: pinmux_emmc_pwrseq_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x850, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a4.gpio1_20 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT_PULLUP, MUX_MODE7)	/* gpmc_a4.gpio1_20 */
 		>;
 	};
 
 	emmc_pins: pinmux_emmc_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
-			AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
-			AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
-			AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
-			AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
-			AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
-			AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
-			AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
-			AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
-			AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN1, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn1.mmc1_clk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_CSN2, PIN_INPUT_PULLUP, MUX_MODE2)	/* gpmc_csn2.mmc1_cmd */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD0, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad0.mmc1_dat0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD1, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad1.mmc1_dat1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD2, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad2.mmc1_dat2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD3, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad3.mmc1_dat3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD4, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad4.mmc1_dat4 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD5, PIN_INPUT_PULLUP, MUX_MODE1) 	/* gpmc_ad5.mmc1_dat5 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD6, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad6.mmc1_dat6 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD7, PIN_INPUT_PULLUP, MUX_MODE1)	/* gpmc_ad7.mmc1_dat7 */
 		>;
 	};
 
-	audio_pins: pinmux_audio_pins {
+	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_ahcklx.mcasp0_ahclkx */
-			AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_fsx.mcasp0_fsx */
-			AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_aclkx.mcasp0_aclkx */
-			AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* mcasp0_axr0.mcasp0_axr0 */
-			AM33XX_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mcasp0_ahclkr.mcasp0_axr2*/
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
 		>;
 	};
 
-	ehrpwm1_pins: pinmux_ehrpwm1a_pins {
+	rtc0_irq_pins: pinmux_rtc0_irq_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a2.ehrpwm1a */
-			AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6)	/* gpmc_a3.ehrpwm1b */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD9, PIN_INPUT_PULLUP, MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D0, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MOSI */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_D1, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_MISO */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_SCLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS0, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_CS0 (NBATTSS) */
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE0)	/* SPI0_CS1 (FPGA_FLASH_NCS) */
 		>;
 	};
 
 	lwb_pins: pinmux_lwb_pins {
 		pinctrl-single,pins = <
-			AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)	/* SoundPA_en - mcasp0_fsr.gpio3_19 */
-			AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)	/* nKbdOnC - gpmc_ad10.gpio0_26 */
-			AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
-			AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
-			AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)	/* nDispReset - gpmc_ad14.gpio1_14 */
-			AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
-			/* AVR Programming - SPI Bus (bit bang) - Screen and Keyboard */
-			AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMOSI spi0_d0.gpio0_3 */
-			AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattMISO spi0_d1.gpio0_4 */
-			AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE7)	/* Kbd/Disp/BattSCLK spi0_clk.gpio0_2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD12, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdInt - gpmc_ad12.gpio1_12 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD13, PIN_INPUT_PULLUP, MUX_MODE7)	/* nKbdReset - gpmc_ad13.gpio1_13 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLUP, MUX_MODE7)	/* USB1_enPower - gpmc_a1.gpio1_17 */
 			/* PDI Bus - Battery system */
-			AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
-			AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7)	/* nBattReset  gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD15, PIN_INPUT_PULLUP, MUX_MODE7)	/* BattPDIData gpmc_ad15.gpio1_15 */
+			/* FPGA */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_AD8, PIN_INPUT_PULLUP, MUX_MODE7)	/* FPGA_DONE - gpmc_ad8.gpio0_22 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_INPUT_PULLUP, MUX_MODE7)	/* FPGA_NRST - gpmc_a0.gpio1_16 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* FPGA_RUN - gpmc_a1.gpio1_17 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLUP, MUX_MODE7)	/* ENFPGA - gpmc_a9.gpio1_25 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE7)	/* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
 		>;
 	};
 };
@@ -267,16 +451,27 @@
 		reg = <0x24>;
 	};
 
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc0_irq_pins>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
+		wakeup-source;
+		trickle-resistor-ohms = <2000>;
+		reg = <0x68>;
+	};
+
 	eeprom: eeprom@50 {
-		compatible = "at,24c256";
+		compatible = "atmel,24c256";
 		reg = <0x50>;
 	};
-};
 
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
+	gpio_exp: mcp23017@20 {
+		compatible = "microchip,mcp23017";
+		reg = <0x20>;
+	};
+
 };
 
 &i2c2 {
@@ -289,51 +484,48 @@
 	audio_codec: tlv320aic3106@1b {
 		status = "okay";
 		compatible = "ti,tlv320aic3106";
+		#sound-dai-cells = <0>;
 		reg = <0x1b>;
+		ai3x-micbias-vg = <2>;  /* 2.5V */
 
 		AVDD-supply = <&ldo4_reg>;
 		IOVDD-supply = <&ldo4_reg>;
 		DRVDD-supply = <&ldo4_reg>;
 		DVDD-supply = <&ldo3_reg>;
-	};
-};
 
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
+		codec_port: port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint>;
+				clocks = <&audio_mclk>;
+			};
+		};
+	};
 
-&usb0_phy {
-	status = "okay";
+	/* Ambient Light Sensor */
+	als: isl29023@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+	};
 };
 
-&usb1_phy {
-	status = "okay";
+&rtc {
+	status = "disabled";
 };
 
 &usb0 {
-	status = "okay";
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 };
 
 &usb1 {
-	status = "okay";
 	dr_mode = "host";
 };
 
-&cppi41dma  {
-	status = "okay";
-};
-
 &mmc1 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&vmmcsd_fixed>;
 };
 
@@ -350,17 +542,27 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&audio_pins>;
-
+	#sound-dai-cells = <0>;
 	op-mode = <0>;  /* MCASP_ISS_MODE */
 	tdm-slots = <2>;
-	serial-dir = <
-		2 0 1 0
-		0 0 0 0
-		0 0 0 0
-		0 0 0 0
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
 	>;
-	tx-num-evt = <1>;
-	rx-num-evt = <1>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+
+	cpu_port: port {
+		cpu_endpoint: endpoint {
+			remote-endpoint = <&codec_endpoint>;
+
+			dai-format = "dsp_b";
+			bitclock-master = <&codec_port>;
+			frame-master = <&codec_port>;
+			bitclock-inversion;
+			clocks = <&audio_mclk>;
+		};
+	};
 };
 
 &uart0 {
@@ -369,12 +571,32 @@
 	pinctrl-0 = <&uart0_pins>;
 };
 
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+};
+
 &uart4 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
 };
 
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+
+	flash: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q032";
+		reg = <1>;
+		spi-max-frequency = <5000000>;
+	};
+};
+
 #include "tps65217.dtsi"
 
 &tps {
@@ -439,28 +661,33 @@
 	};
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
+&cpsw_port1 {
 	phy-mode = "mii";
+	phy-handle = <&ethphy0>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
+&cpsw_port2 {
+	status = "disabled";
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 };
 
-&davinci_mdio {
-	status = "okay";
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
+	reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <100>;   /* PHY datasheet states 100us min */
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
 &sham {
@@ -480,3 +707,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&ehrpwm1_pins>;
 };
+
+&lcdc {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+};
+
+&am335x_adc {
+	ti,adc-channels = <0 1 2 3 4 5 6 7>;
+};
diff --git a/arch/arm/boot/dts/am335x-wega-rdk.dts b/arch/arm/boot/dts/am335x-wega-rdk.dts
new file mode 100644
index 000000000000..866b5f0cbfbc
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega-rdk.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/dts-v1/;
+
+#include "am335x-phycore-som.dtsi"
+#include "am335x-wega.dtsi"
+
+/* SoM */
+&gpmc {
+	status = "okay";
+};
+
+&i2c_eeprom {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi
new file mode 100644
index 000000000000..6a103f17585b
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-wega.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 Phytec Messtechnik GmbH
+ * Author: Teresa Remmet <t.remmet@phytec.de>
+ */
+
+/ {
+	model = "Phytec AM335x phyBOARD-WEGA";
+	compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx";
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "snd-wega";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_iface_main>;
+		simple-audio-card,frame-master = <&sound_iface_main>;
+		simple-audio-card,mclk-fs = <32>;
+		simple-audio-card,widgets =
+					"Line", "Line In",
+					"Line", "Line Out",
+					"Speaker", "Speaker";
+		simple-audio-card,routing =
+					"Line Out", "LLOUT",
+					"Line Out", "RLOUT",
+					"Speaker", "SPOP",
+					"Speaker", "SPOM",
+					"LINE1L", "Line In",
+					"LINE1R", "Line In";
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+		};
+
+		sound_iface_main: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3007>;
+			clocks = <&mcasp0_fck>;
+		};
+
+	};
+
+	vcc3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/* Audio */
+&am33xx_pinmux {
+	mcasp0_pins: pinmux-mcasp0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AHCLKX, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_FSX, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR0, PIN_INPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MCASP0_AXR1, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&i2c0 {
+	tlv320aic3007: tlv320aic3007@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3007";
+		reg = <0x18>;
+		AVDD-supply = <&vcc3v3>;
+		IOVDD-supply = <&vcc3v3>;
+		DRVDD-supply = <&vcc3v3>;
+		DVDD-supply = <&vdig1_reg>;
+		status = "okay";
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	op-mode = <0>; /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <
+		2 1 0 0 /* # 0: INACTIVE, 1: TX, 2: RX */
+	>;
+	tx-num-evt = <16>;
+	rx-num-evt = <16>;
+	status = "okay";
+};
+
+
+/* CAN Busses */
+&am33xx_pinmux {
+	dcan1_pins: pinmux-dcan1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT_PULLUP, MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+			AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+		>;
+	};
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_pins>;
+	status = "okay";
+};
+
+/* Ethernet */
+&am33xx_pinmux {
+	ethernet1_pins: pinmux-ethernet1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A0, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a0.mii2_txen */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a1.mii2_rxdv */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a2.mii2_txd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A3, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a3.mii2_txd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A4, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a4.mii2_txd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A5, PIN_OUTPUT, MUX_MODE1)		/* gpmc_a5.mii2_txd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A6, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a6.mii2_txclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A7, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a7.mii2_rxclk */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A8, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a8.mii2_rxd3 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A9, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a9.mii2_rxd2 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A10, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a10.mii2_rxd1 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_A11, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_a11.mii2_rxd0 */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_WPN, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_wpn.mii2_rxerr */
+			AM33XX_PADCONF(AM335X_PIN_GPMC_BEN1, PIN_INPUT_PULLDOWN, MUX_MODE1)	/* gpmc_ben1.mii2_col */
+		>;
+	};
+};
+
+&cpsw_port2 {
+	status = "okay";
+	phy-handle = <&phy1>;
+	phy-mode = "mii";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet0_pins &ethernet1_pins>;
+};
+
+/* MMC */
+&am33xx_pinmux {
+	mmc1_pins: pinmux-mmc1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT1, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT0, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_SPI0_CS1, PIN_INPUT_PULLUP, MUX_MODE7)	/* spi0_cs1.mmc0_sdcd */
+		>;
+	};
+};
+
+&mmc1 {
+	vmmc-supply = <&vcc3v3>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+/* Power */
+&vdig1_reg {
+	regulator-boot-on;
+	regulator-always-on;
+};
+
+/* UARTs */
+&am33xx_pinmux {
+	uart0_pins: pinmux-uart0 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART0_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART0_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+
+	uart1_pins: pinmux-uart1 {
+		pinctrl-single,pins = <
+			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
+		>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/am33xx-clocks.dtsi b/arch/arm/boot/dts/am33xx-clocks.dtsi
index afb4b3a7bab4..d34483ae1778 100644
--- a/arch/arm/boot/dts/am33xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am33xx-clocks.dtsi
@@ -1,258 +1,292 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM33xx clock data
  *
  * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
+	sys_clkin_ck: clock-sys-clkin-22@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
 	};
 
-	adc_tsc_fck: adc_tsc_fck {
+	adc_tsc_fck: clock-adc-tsc-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "adc_tsc_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan0_fck: dcan0_fck {
+	dcan0_fck: clock-dcan0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan1_fck: dcan1_fck {
+	dcan1_fck: clock-dcan1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp0_fck: mcasp0_fck {
+	mcasp0_fck: clock-mcasp0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp1_fck: mcasp1_fck {
+	mcasp1_fck: clock-mcasp1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex0_fck: smartreflex0_fck {
+	smartreflex0_fck: clock-smartreflex0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex1_fck: smartreflex1_fck {
+	smartreflex1_fck: clock-smartreflex1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sha0_fck: sha0_fck {
+	sha0_fck: clock-sha0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sha0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	aes0_fck: aes0_fck {
+	aes0_fck: clock-aes0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "aes0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	rng_fck: rng_fck {
+	rng_fck: clock-rng-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "rng_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <0>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <1>;
-		reg = <0x0664>;
-	};
-
-	ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l4ls_gclk>;
-		ti,bit-shift = <2>;
-		reg = <0x0664>;
+	clock@664 {
+		compatible = "ti,clksel";
+		reg = <0x664>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ehrpwm0_tbclk: clock-ehrpwm0-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm0_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <0>;
+		};
+
+		ehrpwm1_tbclk: clock-ehrpwm1-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm1_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <1>;
+		};
+
+		ehrpwm2_tbclk: clock-ehrpwm2-tbclk {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "ehrpwm2_tbclk";
+			clocks = <&l4ls_gclk>;
+			ti,bit-shift = <2>;
+		};
 	};
 };
 &prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
+	clk_32768_ck: clock-clk-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32768_ck";
 		clock-frequency = <32768>;
 	};
 
-	clk_rc32k_ck: clk_rc32k_ck {
+	clk_rc32k_ck: clock-clk-rc32k {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_rc32k_ck";
 		clock-frequency = <32000>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_24000000_ck: virt_24000000_ck {
+	virt_24000000_ck: clock-virt-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_24000000_ck";
 		clock-frequency = <24000000>;
 	};
 
-	virt_25000000_ck: virt_25000000_ck {
+	virt_25000000_ck: clock-virt-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_25000000_ck";
 		clock-frequency = <25000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	tclkin_ck: tclkin_ck {
+	tclkin_ck: clock-tclkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tclkin_ck";
 		clock-frequency = <12000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: clock@490 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0490>, <0x045c>, <0x0468>;
+		reg = <0x0490>, <0x045c>, <0x0468>, <0x0460>, <0x0464>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck {
+	dpll_core_m4_ck: clock-dpll-core-m4@480 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0480>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck {
+	dpll_core_m5_ck: clock-dpll-core-m5@484 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x0484>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck {
+	dpll_core_m6_ck: clock-dpll-core-m6@4d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		reg = <0x04d8>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: clock@488 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0488>, <0x0420>, <0x042c>;
+		reg = <0x0488>, <0x0420>, <0x042c>, <0x0424>, <0x0428>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2@4a8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a8>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck {
+	dpll_ddr_ck: clock@494 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0494>, <0x0434>, <0x0440>;
+		reg = <0x0494>, <0x0434>, <0x0440>, <0x0438>, <0x043c>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2@4a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a0>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck {
+	dpll_ddr_m2_div2_ck: clock-dpll-ddr-m2-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_ddr_m2_div2_ck";
 		clocks = <&dpll_ddr_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	dpll_disp_ck: dpll_disp_ck {
+	dpll_disp_ck: clock@498 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-clock";
+		clock-output-names = "dpll_disp_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x0498>, <0x0448>, <0x0454>;
+		reg = <0x0498>, <0x0448>, <0x0454>, <0x044c>, <0x0450>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
+	dpll_disp_m2_ck: clock-dpll-disp-m2@4a4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_disp_m2_ck";
 		clocks = <&dpll_disp_ck>;
 		ti,max-div = <31>;
 		reg = <0x04a4>;
@@ -260,387 +294,486 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: clock@48c {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-no-gate-j-type-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x048c>, <0x0470>, <0x049c>;
+		reg = <0x048c>, <0x0470>, <0x049c>, <0x0474>, <0x0478>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: clock-dpll-per-m2@4ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		reg = <0x04ac>;
 		ti,index-starts-at-one;
 	};
 
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	cefuse_fck: cefuse_fck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x0a20>;
-	};
-
-	clk_24mhz: clk_24mhz {
+	clk_24mhz: clock-clk-24mhz {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clk_24mhz";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	clkdiv32k_ck: clkdiv32k_ck {
+	clkdiv32k_ck: clock-clkdiv32k {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clkdiv32k_ck";
 		clocks = <&clk_24mhz>;
 		clock-mult = <1>;
 		clock-div = <732>;
 	};
 
-	clkdiv32k_ick: clkdiv32k_ick {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x014c>;
-	};
-
-	l3_gclk: l3_gclk {
+	l3_gclk: clock-l3-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk {
+	pruss_ocp_gclk: clock-pruss-ocp-gclk@530 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "pruss_ocp_gclk";
 		clocks = <&l3_gclk>, <&dpll_disp_m2_ck>;
 		reg = <0x0530>;
 	};
 
-	mmu_fck: mmu_fck {
+	mmu_fck: clock-mmu-fck-1@914 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "mmu_fck";
 		clocks = <&dpll_core_m4_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x0914>;
 	};
 
-	timer1_fck: timer1_fck {
+	timer1_fck: clock-timer1-fck@528 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
+		clock-output-names = "timer1_fck";
+		clocks = <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>;
 		reg = <0x0528>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: clock-timer2-fck@508 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "timer2_fck";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0508>;
 	};
 
-	timer3_fck: timer3_fck {
+	timer3_fck: clock-timer3-fck@50c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "timer3_fck";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x050c>;
 	};
 
-	timer4_fck: timer4_fck {
+	timer4_fck: clock-timer4-fck@510 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "timer4_fck";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0510>;
 	};
 
-	timer5_fck: timer5_fck {
+	timer5_fck: clock-timer5-fck@518 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "timer5_fck";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0518>;
 	};
 
-	timer6_fck: timer6_fck {
+	timer6_fck: clock-timer6-fck@51c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "timer6_fck";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x051c>;
 	};
 
-	timer7_fck: timer7_fck {
+	timer7_fck: clock-timer7-fck@504 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "timer7_fck";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0504>;
 	};
 
-	usbotg_fck: usbotg_fck {
+	usbotg_fck: clock-usbotg-fck-8@47c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usbotg_fck";
 		clocks = <&dpll_per_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x047c>;
 	};
 
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_core_m4_div2_ck";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	ieee5000_fck: ieee5000_fck {
+	ieee5000_fck: clock-ieee5000-fck-1@e4 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ieee5000_fck";
 		clocks = <&dpll_core_m4_div2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x00e4>;
 	};
 
-	wdt1_fck: wdt1_fck {
+	wdt1_fck: clock-wdt1-fck@538 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "wdt1_fck";
+		clocks = <&clk_rc32k_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x0538>;
 	};
 
-	l4_rtc_gclk: l4_rtc_gclk {
+	l4_rtc_gclk: clock-l4-rtc-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4_rtc_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l4hs_gclk: l4hs_gclk {
+	l4hs_gclk: clock-l4hs-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4hs_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3s_gclk: l3s_gclk {
+	l3s_gclk: clock-l3s-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3s_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4fw_gclk: l4fw_gclk {
+	l4fw_gclk: clock-l4fw-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4fw_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4ls_gclk: l4ls_gclk {
+	l4ls_gclk: clock-l4ls-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4ls_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sysclk_div_ck: sysclk_div_ck {
+	sysclk_div_ck: clock-sysclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sysclk_div_ck";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_125mhz_gclk";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@520 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "cpsw_cpts_rft_clk";
 		clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>;
 		reg = <0x0520>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@53c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>;
+		clock-output-names = "gpio0_dbclk_mux_ck";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_24mhz_clkctrl AM3_CLK_24MHZ_CLKDIV32K_CLKCTRL 0>;
 		reg = <0x053c>;
 	};
 
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <18>;
-		reg = <0x0408>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00ac>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b0>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <18>;
-		reg = <0x00b4>;
-	};
-
-	lcd_gclk: lcd_gclk {
+	lcd_gclk: clock-lcd-gclk@534 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "lcd_gclk";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x0534>;
 		ti,set-rate-parent;
 	};
 
-	mmc_clk: mmc_clk {
+	mmc_clk: clock-mmc {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mmc_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x052c>;
-	};
-
-	gfx_fck_div_ck: gfx_fck_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&gfx_fclk_clksel_ck>;
-		reg = <0x052c>;
-		ti,max-div = <2>;
-	};
-
-	sysclkout_pre_ck: sysclkout_pre_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
-		reg = <0x0700>;
-	};
-
-	clkout2_div_ck: clkout2_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&sysclkout_pre_ck>;
-		ti,bit-shift = <3>;
-		ti,max-div = <8>;
-		reg = <0x0700>;
-	};
-
-	dbg_sysclk_ck: dbg_sysclk_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin_ck>;
-		ti,bit-shift = <19>;
-		reg = <0x0414>;
-	};
-
-	dbg_clka_ck: dbg_clka_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_core_m4_ck>;
-		ti,bit-shift = <30>;
-		reg = <0x0414>;
-	};
-
-	stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <22>;
-		reg = <0x0414>;
-	};
-
-	trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>;
-		ti,bit-shift = <20>;
-		reg = <0x0414>;
-	};
-
-	stm_clk_div_ck: stm_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&stm_pmd_clock_mux_ck>;
-		ti,bit-shift = <27>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	trace_clk_div_ck: trace_clk_div_ck {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&trace_pmd_clk_mux_ck>;
-		ti,bit-shift = <24>;
-		ti,max-div = <64>;
-		reg = <0x0414>;
-		ti,index-power-of-two;
-	};
-
-	clkout2_ck: clkout2_ck {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkout2_div_ck>;
-		ti,bit-shift = <7>;
-		reg = <0x0700>;
+	clock@52c {
+		compatible = "ti,clksel";
+		reg = <0x52c>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		gfx_fclk_clksel_ck: clock-gfx-fclk-clksel {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "gfx_fclk_clksel_ck";
+			clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>;
+			ti,bit-shift = <1>;
+		};
+
+		gfx_fck_div_ck: clock-gfx-fck-div {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "gfx_fck_div_ck";
+			clocks = <&gfx_fclk_clksel_ck>;
+			ti,max-div = <2>;
+		};
+	};
+
+	clock@700 {
+		compatible = "ti,clksel";
+		reg = <0x700>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		sysclkout_pre_ck: clock-sysclkout-pre {
+			#clock-cells = <0>;
+			compatible = "ti,mux-clock";
+			clock-output-names = "sysclkout_pre_ck";
+			clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>;
+		};
+
+		clkout2_div_ck: clock-clkout2-div {
+			#clock-cells = <0>;
+			compatible = "ti,divider-clock";
+			clock-output-names = "clkout2_div_ck";
+			clocks = <&sysclkout_pre_ck>;
+			ti,bit-shift = <3>;
+			ti,max-div = <8>;
+		};
+
+		clkout2_ck: clock-clkout2 {
+			#clock-cells = <0>;
+			compatible = "ti,gate-clock";
+			clock-output-names = "clkout2_ck";
+			clocks = <&clkout2_div_ck>;
+			ti,bit-shift = <7>;
+		};
 	};
 };
 
-&prcm_clockdomains {
-	clk_24mhz_clkdm: clk_24mhz_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&clkdiv32k_ick>;
+&prcm {
+	per_cm: clock@0 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "per_cm";
+		reg = <0x0 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x0 0x400>;
+
+		l4ls_clkctrl: clock@38 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4ls_clkctrl";
+			reg = <0x38 0x2c>, <0x6c 0x28>, <0xac 0xc>, <0xc0 0x1c>, <0xec 0xc>, <0x10c 0x8>, <0x130 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l3s_clkctrl: clock@1c {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_clkctrl";
+			reg = <0x1c 0x4>, <0x30 0x8>, <0x68 0x4>, <0xf8 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l3_clkctrl: clock@24 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3_clkctrl";
+			reg = <0x24 0xc>, <0x94 0x10>, <0xbc 0x4>, <0xdc 0x8>, <0xfc 0x8>;
+			#clock-cells = <2>;
+		};
+
+		l4hs_clkctrl: clock@120 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4hs_clkctrl";
+			reg = <0x120 0x4>;
+			#clock-cells = <2>;
+		};
+
+		pruss_ocp_clkctrl: clock@e8 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "pruss_ocp_clkctrl";
+			reg = <0xe8 0x4>;
+			#clock-cells = <2>;
+		};
+
+		cpsw_125mhz_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "cpsw_125mhz_clkctrl";
+			reg = <0x0 0x18>;
+			#clock-cells = <2>;
+		};
+
+		lcdc_clkctrl: clock@18 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "lcdc_clkctrl";
+			reg = <0x18 0x4>;
+			#clock-cells = <2>;
+		};
+
+		clk_24mhz_clkctrl: clock@14c {
+			compatible = "ti,clkctrl";
+			clock-output-names = "clk_24mhz_clkctrl";
+			reg = <0x14c 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	wkup_cm: clock@400 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "wkup_cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		l4_wkup_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
+			reg = <0x0 0x10>, <0xb4 0x24>;
+			#clock-cells = <2>;
+		};
+
+		l3_aon_clkctrl: clock@14 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3_aon_clkctrl";
+			reg = <0x14 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_aon_clkctrl: clock@b0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_aon_clkctrl";
+			reg = <0xb0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	mpu_cm: clock@600 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		mpu_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
+			reg = <0x0 0x8>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_rtc_cm: clock@800 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_rtc_cm";
+		reg = <0x800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x800 0x100>;
+
+		l4_rtc_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_rtc_clkctrl";
+			reg = <0x0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gfx_l3_cm: clock@900 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "gfx_l3_cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		gfx_l3_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "gfx_l3_clkctrl";
+			reg = <0x0 0x8>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_cefuse_cm: clock@a00 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_cefuse_cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		l4_cefuse_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_cefuse_clkctrl";
+			reg = <0x0 0x24>;
+			#clock-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi
new file mode 100644
index 000000000000..7e50fe633d8a
--- /dev/null
+++ b/arch/arm/boot/dts/am33xx-l4.dtsi
@@ -0,0 +1,2322 @@
+&l4_wkup {						/* 0x44c00000 */
+	compatible = "ti,am33xx-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkup>;
+	clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x44c00000 0x800>,
+	      <0x44c00800 0x800>,
+	      <0x44c01000 0x400>,
+	      <0x44c01400 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x44c00000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x44d00000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x44e00000 0x100000>;	/* segment 2 */
+
+	segment@0 {					/* 0x44c00000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>;	/* ap 3 */
+	};
+
+	segment@100000 {					/* 0x44d00000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x004000>,	/* ap 4 */
+			 <0x00004000 0x00104000 0x001000>,	/* ap 5 */
+			 <0x00080000 0x00180000 0x002000>,	/* ap 6 */
+			 <0x00082000 0x00182000 0x001000>;	/* ap 7 */
+
+		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>;
+			reg-names = "rev";
+			clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x4000>,
+				 <0x00080000 0x00080000 0x2000>;
+
+			wkup_m3: cpu@0 {
+				compatible = "ti,am3352-wkup-m3";
+				reg = <0x00000000 0x4000>,
+				      <0x00080000 0x2000>;
+				reg-names = "umem", "dmem";
+				resets = <&prm_wkup 3>;
+				reset-names = "rstctrl";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x44e00000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00200000 0x002000>,	/* ap 8 */
+			 <0x00002000 0x00202000 0x001000>,	/* ap 9 */
+			 <0x00003000 0x00203000 0x001000>,	/* ap 10 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 11 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 12 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 13 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 14 */
+			 <0x00008000 0x00208000 0x001000>,	/* ap 15 */
+			 <0x00009000 0x00209000 0x001000>,	/* ap 16 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 17 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 20 */
+			 <0x0000f000 0x0020f000 0x001000>,	/* ap 21 */
+			 <0x00010000 0x00210000 0x010000>,	/* ap 22 */
+			 <0x00020000 0x00220000 0x010000>,	/* ap 23 */
+			 <0x00030000 0x00230000 0x001000>,	/* ap 24 */
+			 <0x00031000 0x00231000 0x001000>,	/* ap 25 */
+			 <0x00032000 0x00232000 0x001000>,	/* ap 26 */
+			 <0x00033000 0x00233000 0x001000>,	/* ap 27 */
+			 <0x00034000 0x00234000 0x001000>,	/* ap 28 */
+			 <0x00035000 0x00235000 0x001000>,	/* ap 29 */
+			 <0x00036000 0x00236000 0x001000>,	/* ap 30 */
+			 <0x00037000 0x00237000 0x001000>,	/* ap 31 */
+			 <0x00038000 0x00238000 0x001000>,	/* ap 32 */
+			 <0x00039000 0x00239000 0x001000>,	/* ap 33 */
+			 <0x0003a000 0x0023a000 0x001000>,	/* ap 34 */
+			 <0x0003e000 0x0023e000 0x001000>,	/* ap 35 */
+			 <0x0003f000 0x0023f000 0x001000>,	/* ap 36 */
+			 <0x0000e000 0x0020e000 0x001000>,	/* ap 37 */
+			 <0x00040000 0x00240000 0x040000>,	/* ap 38 */
+			 <0x00080000 0x00280000 0x001000>;	/* ap 39 */
+
+		target-module@0 {			/* 0x44e00000, ap 8 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x2000>;
+
+			prcm: prcm@0 {
+				compatible = "ti,am3-prcm", "simple-bus";
+				reg = <0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@3000 {			/* 0x44e03000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+
+		target-module@5000 {			/* 0x44e05000, ap 12 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+		};
+
+		gpio0_target: target-module@7000 {	/* 0x44e07000, ap 14 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7000 0x4>,
+			      <0x7010 0x4>,
+			      <0x7114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7000 0x1000>;
+
+			gpio0: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  82 8>,
+						<&am33xx_pinmux  8  52 4>,
+						<&am33xx_pinmux 12  94 4>,
+						<&am33xx_pinmux 16  71 2>,
+						<&am33xx_pinmux 18 135 1>,
+						<&am33xx_pinmux 19 108 2>,
+						<&am33xx_pinmux 21  73 1>,
+						<&am33xx_pinmux 22   8 2>,
+						<&am33xx_pinmux 26  10 2>,
+						<&am33xx_pinmux 28  74 1>,
+						<&am33xx_pinmux 29  81 1>,
+						<&am33xx_pinmux 30  28 2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <96>;
+			};
+		};
+
+		target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9050 0x4>,
+			      <0x9054 0x4>,
+			      <0x9058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9000 0x1000>;
+
+			uart0: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <72>;
+				status = "disabled";
+				dmas = <&edma 26 0>, <&edma 27 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@b000 {			/* 0x44e0b000, ap 18 48.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb000 0x8>,
+			      <0xb010 0x8>,
+			      <0xb090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb000 0x1000>;
+
+			i2c0: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x1000>;
+				interrupts = <70>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd000 0x4>,
+			      <0xd010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x0000d000 0x00001000>,
+				 <0x00001000 0x0000e000 0x00001000>;
+
+			tscadc: tscadc@0 {
+				compatible = "ti,am3359-tscadc";
+				reg = <0x0 0x1000>;
+				interrupts = <16>;
+				clocks = <&adc_tsc_fck>;
+				clock-names = "fck";
+				status = "disabled";
+				dmas = <&edma 53 0>, <&edma 57 0>;
+				dma-names = "fifo0", "fifo1";
+
+				tsc {
+					compatible = "ti,am3359-tsc";
+				};
+				am335x_adc: adc {
+					#io-channel-cells = <1>;
+					compatible = "ti,am3359-adc";
+				};
+			};
+		};
+
+		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x10000 0x4>;
+			reg-names = "rev";
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_CONTROL_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00010000 0x00010000>,
+				 <0x00010000 0x00020000 0x00010000>;
+
+			scm: scm@0 {
+				compatible = "ti,am3-scm", "simple-bus";
+				reg = <0x0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#pinctrl-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				am33xx_pinmux: pinmux@800 {
+					compatible = "pinctrl-single";
+					reg = <0x800 0x238>;
+					#pinctrl-cells = <2>;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x7f>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x800>;
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am3352-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				usb_ctrl_mod: control@620 {
+					compatible = "ti,am335x-usb-ctrl-module";
+					reg = <0x620 0x10>,
+					      <0x648 0x4>;
+					reg-names = "phy_ctrl", "wakeup";
+				};
+
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am3352-wkup-m3-ipc";
+					reg = <0x1324 0x24>;
+					interrupts = <78>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		timer1_target: target-module@31000 {	/* 0x44e31000, ap 25 40.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x31000 0x4>,
+			      <0x31010 0x4>,
+			      <0x31014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x31000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,am335x-timer-1ms";
+				reg = <0x0 0x400>;
+				interrupts = <67>;
+				ti,timer-alwon;
+				clocks = <&timer1_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@33000 {			/* 0x44e33000, ap 27 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x33000 0x1000>;
+		};
+
+		target-module@35000 {			/* 0x44e35000, ap 29 50.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x35000 0x4>,
+			      <0x35010 0x4>,
+			      <0x35014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x35000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap3-wdt";
+				reg = <0x0 0x1000>;
+				interrupts = <91>;
+			};
+		};
+
+		target-module@37000 {			/* 0x44e37000, ap 31 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x37000 0x1000>;
+		};
+
+		target-module@39000 {			/* 0x44e39000, ap 33 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x39000 0x1000>;
+		};
+
+		target-module@3e000 {			/* 0x44e3e000, ap 35 60.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3e074 0x4>,
+			      <0x3e078 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+			power-domains = <&prm_rtc>;
+			clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			rtc: rtc@0 {
+				compatible = "ti,am3352-rtc", "ti,da830-rtc";
+				reg = <0x0 0x1000>;
+				interrupts = <75
+					      76>;
+			};
+		};
+
+		target-module@40000 {			/* 0x44e40000, ap 38 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x40000>;
+		};
+	};
+};
+
+&l4_fw {						/* 0x47c00000 */
+	compatible = "ti,am33xx-l4-fw", "simple-bus";
+	reg = <0x47c00000 0x800>,
+	      <0x47c00800 0x800>,
+	      <0x47c01000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x47c00000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x47c00000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 3 */
+			 <0x0000d000 0x0000d000 0x001000>,	/* ap 4 */
+			 <0x0000e000 0x0000e000 0x001000>,	/* ap 5 */
+			 <0x0000f000 0x0000f000 0x001000>,	/* ap 6 */
+			 <0x00010000 0x00010000 0x001000>,	/* ap 7 */
+			 <0x00011000 0x00011000 0x001000>,	/* ap 8 */
+			 <0x0001a000 0x0001a000 0x001000>,	/* ap 9 */
+			 <0x0001b000 0x0001b000 0x001000>,	/* ap 10 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 11 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 12 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 14 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 15 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 16 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 17 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 18 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 19 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 20 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 22 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 23 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 24 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 25 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 26 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 27 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 28 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 29 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 30 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 31 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 32 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 33 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 34 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 35 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 36 */
+			 <0x00014000 0x00014000 0x001000>,	/* ap 37 */
+			 <0x00015000 0x00015000 0x001000>;	/* ap 38 */
+
+		target-module@c000 {			/* 0x47c0c000, ap 3 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@e000 {			/* 0x47c0e000, ap 5 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x47c10000, ap 7 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x47c14000, ap 37 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@1a000 {			/* 0x47c1a000, ap 9 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1a000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x47c24000, ap 11 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x47c26000, ap 13 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@28000 {			/* 0x47c28000, ap 29 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+		};
+
+		target-module@30000 {			/* 0x47c30000, ap 15 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+		};
+
+		target-module@32000 {			/* 0x47c32000, ap 31 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+		};
+
+		target-module@38000 {			/* 0x47c38000, ap 17 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>;
+		};
+
+		target-module@3a000 {			/* 0x47c3a000, ap 19 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>;
+		};
+
+		target-module@3c000 {			/* 0x47c3c000, ap 23 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>;
+		};
+
+		target-module@3e000 {			/* 0x47c3e000, ap 21 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+		};
+
+		target-module@40000 {			/* 0x47c40000, ap 24 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+		};
+
+		target-module@42000 {			/* 0x47c42000, ap 35 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+		};
+
+		target-module@44000 {			/* 0x47c44000, ap 27 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+		};
+
+		target-module@46000 {			/* 0x47c46000, ap 25 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+		};
+	};
+};
+
+&l4_fast {					/* 0x4a000000 */
+	compatible = "ti,am33xx-l4-fast", "simple-pm-bus";
+	power-domains = <&prm_per>;
+	clocks = <&l4hs_clkctrl AM3_L4HS_L4_HS_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00100000 0x00100000 0x008000>,	/* ap 3 */
+			 <0x00108000 0x00108000 0x001000>,	/* ap 4 */
+			 <0x00180000 0x00180000 0x020000>,	/* ap 5 */
+			 <0x001a0000 0x001a0000 0x001000>,	/* ap 6 */
+			 <0x00200000 0x00200000 0x080000>,	/* ap 7 */
+			 <0x00280000 0x00280000 0x001000>,	/* ap 8 */
+			 <0x00300000 0x00300000 0x080000>,	/* ap 9 */
+			 <0x00380000 0x00380000 0x001000>;	/* ap 10 */
+
+		target-module@100000 {			/* 0x4a100000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x101200 0x4>,
+			      <0x101208 0x4>,
+			      <0x101204 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <0>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x8000>;
+
+			mac: ethernet@0 {
+				compatible = "ti,am335x-cpsw","ti,cpsw";
+				clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+				clock-names = "fck", "cpts";
+				cpdma_channels = <8>;
+				ale_entries = <1024>;
+				bd_ram_size = <0x2000>;
+				mac_control = <0x20>;
+				slaves = <2>;
+				active_slave = <0>;
+				cpts_clock_mult = <0x80000000>;
+				cpts_clock_shift = <29>;
+				reg = <0x0 0x800
+				       0x1200 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				/*
+				 * c0_rx_thresh_pend
+				 * c0_rx_pend
+				 * c0_tx_pend
+				 * c0_misc_pend
+				 */
+				interrupts = <40 41 42 43>;
+				ranges = <0 0 0x8000>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				davinci_mdio: mdio@1000 {
+					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+					status = "disabled";
+				};
+
+				cpsw_emac0: slave@200 {
+					/* Filled in by U-Boot */
+					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 1 1>;
+				};
+
+				cpsw_emac1: slave@300 {
+					/* Filled in by U-Boot */
+					mac-address = [ 00 00 00 00 00 00 ];
+					phys = <&phy_gmii_sel 2 1>;
+				};
+			};
+
+			mac_sw: switch@0 {
+				compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&cpsw_125mhz_gclk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				interrupts = <40 41 42 43>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+				ethernet-ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						label = "port1";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1 1>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						label = "port2";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2 1>;
+					};
+				};
+
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&cpsw_125mhz_gclk>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+				};
+
+				cpts {
+					clocks = <&cpsw_cpts_rft_clk>;
+					clock-names = "cpts";
+				};
+			};
+		};
+
+		target-module@180000 {			/* 0x4a180000, ap 5 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x180000 0x20000>;
+		};
+
+		target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x200000 0x80000>;
+		};
+
+		pruss_tm: target-module@300000 {	/* 0x4a300000, ap 9 04.0 */
+			compatible = "ti,sysc-pruss", "ti,sysc";
+			reg = <0x326000 0x4>,
+			      <0x326004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+					 SYSC_PRUSS_SUB_MWAIT)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_per 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x300000 0x80000>;
+			status = "disabled";
+
+			pruss: pruss@0 {
+				compatible = "ti,am3356-pruss";
+				reg = <0x0 0x80000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss_mem: memories@0 {
+					reg = <0x0 0x2000>,
+					      <0x2000 0x2000>,
+					      <0x10000 0x3000>;
+					reg-names = "dram0", "dram1",
+						    "shrdram2";
+				};
+
+				pruss_cfg: cfg@26000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x26000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x26000 0x2000>;
+
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&l3_gclk>,        /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss_mii_rt: mii-rt@32000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x32000 0x58>;
+				};
+
+				pruss_intc: interrupt-controller@20000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x20000 0x2000>;
+					interrupts = <20 21 22 23 24 25 26 27>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4", "host_intr5",
+							  "host_intr6", "host_intr7";
+					interrupt-controller;
+					#interrupt-cells = <3>;
+				};
+
+				pru0: pru@34000 {
+					compatible = "ti,am3356-pru";
+					reg = <0x34000 0x2000>,
+					      <0x22000 0x400>,
+					      <0x22400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am335x-pru0-fw";
+				};
+
+				pru1: pru@38000 {
+					compatible = "ti,am3356-pru";
+					reg = <0x38000 0x2000>,
+					      <0x24000 0x400>,
+					      <0x24400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am335x-pru1-fw";
+				};
+
+				pruss_mdio: mdio@32400 {
+					compatible = "ti,davinci_mdio";
+					reg = <0x32400 0x90>;
+					clocks = <&dpll_core_m4_ck>;
+					clock-names = "fck";
+					bus_freq = <1000000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+	};
+};
+
+&l4_mpuss {						/* 0x4b140000 */
+	compatible = "ti,am33xx-l4-mpuss", "simple-bus";
+	reg = <0x4b144400 0x100>,
+	      <0x4b144800 0x400>;
+	reg-names = "la", "ap";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4b140000 0x008000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4b140000 */
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00004800 0x00004800 0x000400>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 2 */
+			 <0x00004000 0x00004000 0x000400>,	/* ap 3 */
+			 <0x00005000 0x00005000 0x000400>,	/* ap 4 */
+			 <0x00000000 0x00000000 0x001000>,	/* ap 5 */
+			 <0x00003000 0x00003000 0x001000>,	/* ap 6 */
+			 <0x00000800 0x00000800 0x000800>;	/* ap 7 */
+
+		target-module@0 {			/* 0x4b140000, ap 5 02.2 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x00001000>,
+				 <0x00001000 0x00001000 0x00001000>,
+				 <0x00002000 0x00002000 0x00001000>;
+		};
+
+		target-module@3000 {			/* 0x4b143000, ap 6 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+	};
+};
+
+&l4_per {						/* 0x48000000 */
+	compatible = "ti,am33xx-l4-per", "simple-pm-bus";
+	power-domains = <&prm_per>;
+	clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x48100000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x48200000 0x100000>,	/* segment 2 */
+		 <0x00300000 0x48300000 0x100000>,	/* segment 3 */
+		 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 5 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 6 */
+			 <0x00009000 0x00009000 0x001000>,	/* ap 7 */
+			 <0x00016000 0x00016000 0x001000>,	/* ap 8 */
+			 <0x00017000 0x00017000 0x001000>,	/* ap 9 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 10 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 11 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 12 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 13 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 15 */
+			 <0x00038000 0x00038000 0x002000>,	/* ap 16 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 17 */
+			 <0x00014000 0x00014000 0x001000>,	/* ap 18 */
+			 <0x00015000 0x00015000 0x001000>,	/* ap 19 */
+			 <0x0003c000 0x0003c000 0x002000>,	/* ap 20 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 21 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 22 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 23 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 24 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 25 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 26 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 27 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 28 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 29 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 30 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 31 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 32 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 33 */
+			 <0x00050000 0x00050000 0x002000>,	/* ap 34 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 35 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 36 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 37 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 38 */
+			 <0x00090000 0x00090000 0x001000>,	/* ap 39 */
+			 <0x000a0000 0x000a0000 0x010000>,	/* ap 40 */
+			 <0x000b0000 0x000b0000 0x001000>,	/* ap 41 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 77 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 78 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 85 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 86 */
+			 <0x000c8000 0x000c8000 0x001000>,	/* ap 87 */
+			 <0x000c9000 0x000c9000 0x001000>,	/* ap 88 */
+			 <0x000cc000 0x000cc000 0x001000>,	/* ap 89 */
+			 <0x000cd000 0x000cd000 0x001000>,	/* ap 90 */
+			 <0x000ca000 0x000ca000 0x001000>,	/* ap 91 */
+			 <0x000cb000 0x000cb000 0x001000>,	/* ap 92 */
+			 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+			 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+		target-module@8000 {			/* 0x48008000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x48014000, ap 18 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x48016000, ap 8 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48022000, ap 10 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22050 0x4>,
+			      <0x22054 0x4>,
+			      <0x22058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <73>;
+				status = "disabled";
+				dmas = <&edma 28 0>, <&edma 29 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@24000 {			/* 0x48024000, ap 12 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x24050 0x4>,
+			      <0x24054 0x4>,
+			      <0x24058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <74>;
+				status = "disabled";
+				dmas = <&edma 30 0>, <&edma 31 0>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@2a000 {			/* 0x4802a000, ap 14 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2a000 0x8>,
+			      <0x2a010 0x8>,
+			      <0x2a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x1000>;
+				interrupts = <71>;
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x48030000, ap 77 08.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x30000 0x4>,
+			      <0x30110 0x4>,
+			      <0x30114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+
+			spi0: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x400>;
+				interrupts = <65>;
+				ti,spi-num-cs = <2>;
+				dmas = <&edma 16 0
+					&edma 17 0
+					&edma 18 0
+					&edma 19 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@38000 {			/* 0x48038000, ap 16 02.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x2000>,
+				 <0x46000000 0x46000000 0x400000>;
+
+			mcasp0: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46000000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <80>, <81>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 8 2>,
+					<&edma 9 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@3c000 {			/* 0x4803c000, ap 20 32.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x2000>,
+				 <0x46400000 0x46400000 0x400000>;
+
+			mcasp1: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46400000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <82>, <83>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 10 2>,
+					<&edma 11 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		timer2_target: target-module@40000 {	/* 0x48040000, ap 22 1e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40010 0x4>,
+			      <0x40014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <68>;
+				clocks = <&timer2_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@42000 {			/* 0x48042000, ap 24 1c.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42010 0x4>,
+			      <0x42014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <69>;
+			};
+		};
+
+		target-module@44000 {			/* 0x48044000, ap 26 26.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x44000 0x4>,
+			      <0x44010 0x4>,
+			      <0x44014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <92>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@46000 {			/* 0x48046000, ap 28 28.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x46000 0x4>,
+			      <0x46010 0x4>,
+			      <0x46014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <93>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@48000 {			/* 0x48048000, ap 30 22.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x48000 0x4>,
+			      <0x48010 0x4>,
+			      <0x48014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <94>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@4a000 {			/* 0x4804a000, ap 85 60.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x4a000 0x4>,
+			      <0x4a010 0x4>,
+			      <0x4a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <95>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@4c000 {			/* 0x4804c000, ap 32 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>,
+			      <0x4c114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
+						<&am33xx_pinmux  8 90  4>,
+						<&am33xx_pinmux 12 12 16>,
+						<&am33xx_pinmux 28 30  4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <98>;
+			};
+		};
+
+		target-module@50000 {			/* 0x48050000, ap 34 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x50000 0x2000>;
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 36 0c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x602fc 0x4>,
+			      <0x60110 0x4>,
+			      <0x60114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,am335-sdhci";
+				ti,needs-special-reset;
+				dmas = <&edma 24 0>, <&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <64>;
+				reg = <0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48080000, ap 38 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>,
+			      <0x80014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <4>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a0000 {			/* 0x480a0000, ap 40 5e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x10000>;
+		};
+
+		target-module@c8000 {			/* 0x480c8000, ap 87 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc8000 0x4>,
+			      <0xc8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <77>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <8>;
+				mbox_wkupm3: mbox-wkup-m3 {
+					ti,mbox-send-noirq;
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <0 0 3>;
+				};
+			};
+		};
+
+		target-module@ca000 {			/* 0x480ca000, ap 91 40.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xca000 0x4>,
+			      <0xca010 0x4>,
+			      <0xca014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xca000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+
+		target-module@cc000 {			/* 0x480cc000, ap 89 0e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x1000>;
+		};
+	};
+
+	segment@100000 {					/* 0x48100000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 42 */
+			 <0x0008d000 0x0018d000 0x001000>,	/* ap 43 */
+			 <0x0008e000 0x0018e000 0x001000>,	/* ap 44 */
+			 <0x0008f000 0x0018f000 0x001000>,	/* ap 45 */
+			 <0x0009c000 0x0019c000 0x001000>,	/* ap 46 */
+			 <0x0009d000 0x0019d000 0x001000>,	/* ap 47 */
+			 <0x000a6000 0x001a6000 0x001000>,	/* ap 48 */
+			 <0x000a7000 0x001a7000 0x001000>,	/* ap 49 */
+			 <0x000a8000 0x001a8000 0x001000>,	/* ap 50 */
+			 <0x000a9000 0x001a9000 0x001000>,	/* ap 51 */
+			 <0x000aa000 0x001aa000 0x001000>,	/* ap 52 */
+			 <0x000ab000 0x001ab000 0x001000>,	/* ap 53 */
+			 <0x000ac000 0x001ac000 0x001000>,	/* ap 54 */
+			 <0x000ad000 0x001ad000 0x001000>,	/* ap 55 */
+			 <0x000ae000 0x001ae000 0x001000>,	/* ap 56 */
+			 <0x000af000 0x001af000 0x001000>,	/* ap 57 */
+			 <0x000b0000 0x001b0000 0x010000>,	/* ap 58 */
+			 <0x000c0000 0x001c0000 0x001000>,	/* ap 59 */
+			 <0x000cc000 0x001cc000 0x002000>,	/* ap 60 */
+			 <0x000ce000 0x001ce000 0x002000>,	/* ap 61 */
+			 <0x000d0000 0x001d0000 0x002000>,	/* ap 62 */
+			 <0x000d2000 0x001d2000 0x002000>,	/* ap 63 */
+			 <0x000d8000 0x001d8000 0x001000>,	/* ap 64 */
+			 <0x000d9000 0x001d9000 0x001000>,	/* ap 65 */
+			 <0x000a0000 0x001a0000 0x001000>,	/* ap 79 */
+			 <0x000a1000 0x001a1000 0x001000>,	/* ap 80 */
+			 <0x000a2000 0x001a2000 0x001000>,	/* ap 81 */
+			 <0x000a3000 0x001a3000 0x001000>,	/* ap 82 */
+			 <0x000a4000 0x001a4000 0x001000>,	/* ap 83 */
+			 <0x000a5000 0x001a5000 0x001000>;	/* ap 84 */
+
+		target-module@8c000 {			/* 0x4818c000, ap 42 04.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8c000 0x1000>;
+		};
+
+		target-module@8e000 {			/* 0x4818e000, ap 44 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8e000 0x1000>;
+		};
+
+		target-module@9c000 {			/* 0x4819c000, ap 46 5a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9c000 0x8>,
+			      <0x9c010 0x8>,
+			      <0x9c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x1000>;
+				interrupts = <30>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a0000 {			/* 0x481a0000, ap 79 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa0000 0x4>,
+			      <0xa0110 0x4>,
+			      <0xa0114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x1000>;
+
+			spi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x0 0x400>;
+				interrupts = <125>;
+				ti,spi-num-cs = <2>;
+				dmas = <&edma 42 0
+					&edma 43 0
+					&edma 44 0
+					&edma 45 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@a2000 {			/* 0x481a2000, ap 81 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x481a4000, ap 83 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa4000 0x1000>;
+		};
+
+		target-module@a6000 {			/* 0x481a6000, ap 48 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa6050 0x4>,
+			      <0xa6054 0x4>,
+			      <0xa6058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa6000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <44>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a8000 {			/* 0x481a8000, ap 50 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa8050 0x4>,
+			      <0xa8054 0x4>,
+			      <0xa8058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <45>;
+				status = "disabled";
+			};
+		};
+
+		target-module@aa000 {			/* 0x481aa000, ap 52 1a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xaa050 0x4>,
+			      <0xaa054 0x4>,
+			      <0xaa058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xaa000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				clock-frequency = <48000000>;
+				reg = <0x0 0x1000>;
+				interrupts = <46>;
+				status = "disabled";
+			};
+		};
+
+		target-module@ac000 {			/* 0x481ac000, ap 54 38.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xac000 0x4>,
+			      <0xac010 0x4>,
+			      <0xac114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xac000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+                                gpio-ranges =	<&am33xx_pinmux  0 34 18>,
+						<&am33xx_pinmux 18 77  4>,
+						<&am33xx_pinmux 22 56 10>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <32>;
+			};
+		};
+
+		gpio3_target: target-module@ae000 {		/* 0x481ae000, ap 56 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xae000 0x4>,
+			      <0xae010 0x4>,
+			      <0xae114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xae000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				gpio-ranges =	<&am33xx_pinmux  0  66 5>,
+						<&am33xx_pinmux  5  98 2>,
+						<&am33xx_pinmux  7  75 2>,
+						<&am33xx_pinmux 13 141 1>,
+						<&am33xx_pinmux 14 100 8>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x0 0x1000>;
+				interrupts = <62>;
+			};
+		};
+
+		target-module@b0000 {			/* 0x481b0000, ap 58 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb0000 0x10000>;
+		};
+
+		target-module@cc000 {			/* 0x481cc000, ap 60 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
+				 <&dcan0_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x2000>;
+
+			dcan0: can@0 {
+				compatible = "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 0>;
+				interrupts = <52>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d0000 {			/* 0x481d0000, ap 62 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
+				 <&dcan1_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd0000 0x2000>;
+
+			dcan1: can@0 {
+				compatible = "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 1>;
+				interrupts = <55>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d8000 {			/* 0x481d8000, ap 64 66.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xd82fc 0x4>,
+			      <0xd8110 0x4>,
+			      <0xd8114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd8000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,am335-sdhci";
+				ti,needs-special-reset;
+				dmas = <&edma 2 0
+					&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <28>;
+				reg = <0x0 0x1000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00200000 0x010000>;
+
+		target-module@0 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpu_clkctrl AM3_MPU_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x10000>;
+
+			mpu@0 {
+				compatible = "ti,omap3-mpu";
+				pm-sram = <&pm_sram_code
+					   &pm_sram_data>;
+			};
+		};
+	};
+
+	segment@300000 {					/* 0x48300000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 66 */
+			 <0x00001000 0x00301000 0x001000>,	/* ap 67 */
+			 <0x00002000 0x00302000 0x001000>,	/* ap 68 */
+			 <0x00003000 0x00303000 0x001000>,	/* ap 69 */
+			 <0x00004000 0x00304000 0x001000>,	/* ap 70 */
+			 <0x00005000 0x00305000 0x001000>,	/* ap 71 */
+			 <0x0000e000 0x0030e000 0x001000>,	/* ap 72 */
+			 <0x0000f000 0x0030f000 0x001000>,	/* ap 73 */
+			 <0x00018000 0x00318000 0x004000>,	/* ap 74 */
+			 <0x0001c000 0x0031c000 0x001000>,	/* ap 75 */
+			 <0x00010000 0x00310000 0x002000>,	/* ap 76 */
+			 <0x00012000 0x00312000 0x001000>,	/* ap 93 */
+			 <0x00015000 0x00315000 0x001000>,	/* ap 94 */
+			 <0x00016000 0x00316000 0x001000>,	/* ap 95 */
+			 <0x00017000 0x00317000 0x001000>,	/* ap 96 */
+			 <0x00013000 0x00313000 0x001000>,	/* ap 97 */
+			 <0x00014000 0x00314000 0x001000>,	/* ap 98 */
+			 <0x00020000 0x00320000 0x001000>,	/* ap 99 */
+			 <0x00021000 0x00321000 0x001000>,	/* ap 100 */
+			 <0x00022000 0x00322000 0x001000>,	/* ap 101 */
+			 <0x00023000 0x00323000 0x001000>,	/* ap 102 */
+			 <0x00024000 0x00324000 0x001000>,	/* ap 103 */
+			 <0x00025000 0x00325000 0x001000>;	/* ap 104 */
+
+		target-module@0 {			/* 0x48300000, ap 66 48.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			epwmss0: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap0: pwm@100 {
+					compatible = "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				eqep0: counter@180 {
+					compatible = "ti,am3352-eqep";
+					reg = <0x180 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "sysclkout";
+					interrupts = <79>;
+					status = "disabled";
+				};
+
+				ehrpwm0: pwm@200 {
+					compatible = "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x48302000, ap 68 52.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>,
+			      <0x2004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			epwmss1: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap1: pwm@100 {
+					compatible = "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				eqep1: counter@180 {
+					compatible = "ti,am3352-eqep";
+					reg = <0x180 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "sysclkout";
+					interrupts = <88>;
+					status = "disabled";
+				};
+
+				ehrpwm1: pwm@200 {
+					compatible = "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x48304000, ap 70 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			epwmss2: epwmss@0 {
+				compatible = "ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap2: pwm@100 {
+					compatible = "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				eqep2: counter@180 {
+					compatible = "ti,am3352-eqep";
+					reg = <0x180 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "sysclkout";
+					interrupts = <89>;
+					status = "disabled";
+				};
+
+				ehrpwm2: pwm@200 {
+					compatible = "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@e000 {			/* 0x4830e000, ap 72 4a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xe000 0x4>,
+			      <0xe054 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, lcdc_clkdm */
+			clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+
+			lcdc: lcdc@0 {
+				compatible = "ti,am33xx-tilcdc";
+				reg = <0x0 0x1000>;
+				interrupts = <36>;
+				status = "disabled";
+			};
+		};
+
+		target-module@10000 {			/* 0x48310000, ap 76 4e.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x11fe0 0x4>,
+			      <0x11fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <111>;
+			};
+		};
+
+		target-module@13000 {			/* 0x48313000, ap 97 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x13000 0x1000>;
+		};
+
+		target-module@15000 {			/* 0x48315000, ap 94 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00015000 0x00001000>,
+				 <0x00001000 0x00016000 0x00001000>;
+		};
+
+		target-module@18000 {			/* 0x48318000, ap 74 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x4000>;
+		};
+
+		target-module@20000 {			/* 0x48320000, ap 99 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48322000, ap 101 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x48324000, ap 103 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 21fcc440fc1a..32d397b3950b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -1,21 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM33XX SoC
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/am33xx.h>
-
-#include "skeleton.dtsi"
+#include <dt-bindings/clock/am3.h>
 
 / {
 	compatible = "ti,am33xx";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c0;
@@ -27,14 +27,19 @@
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
-		d_can0 = &dcan0;
-		d_can1 = &dcan1;
+		d-can0 = &dcan0;
+		d-can1 = &dcan1;
 		usb0 = &usb0;
 		usb1 = &usb1;
 		phy0 = &usb0_phy;
 		phy1 = &usb1_phy;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		spi0 = &spi0;
+		spi1 = &spi1;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
 	};
 
 	cpus {
@@ -42,475 +47,326 @@
 		#size-cells = <0>;
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+			enable-method = "ti,am3352";
 			device_type = "cpu";
 			reg = <0>;
 
-			/*
-			 * To consider voltage drop between PMIC and SoC,
-			 * tolerance value is reduced to 2% from 4% and
-			 * voltage value is increased as a precaution.
-			 */
-			operating-points = <
-				/* kHz    uV */
-				720000  1285000
-				600000  1225000
-				500000  1125000
-				275000  1125000
-			>;
-			voltage-tolerance = <2>; /* 2 percentage */
+			operating-points-v2 = <&cpu0_opp_table>;
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
 
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
 		};
-	};
-
-	pmu {
-		compatible = "arm,cortex-a8-pmu";
-		interrupts = <3>;
-	};
 
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap3-mpu";
-			ti,hwmods = "mpu";
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <90>;
+				min-residency-us = <300>;
+				ti,idle-wkup-m3;
+			};
 		};
 	};
 
-	/*
-	 * XXX: Use a flat representation of the AM33XX interconnect.
-	 * The real AM33XX interconnect network is quite complex. Since
-	 * it will not bring real advantage to represent that in DT
-	 * for the moment, just use a fake OCP bus entry to represent
-	 * the whole bus hierarchy.
-	 */
-	ocp {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main";
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
 
-		l4_wkup: l4_wkup@44c00000 {
-			compatible = "ti,am3-l4-wkup", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x44c00000 0x280000>;
-
-			prcm: prcm@200000 {
-				compatible = "ti,am3-prcm";
-				reg = <0x200000 0x4000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			scm: scm@210000 {
-				compatible = "ti,am3-scm", "simple-bus";
-				reg = <0x210000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x210000 0x2000>;
-
-				am33xx_pinmux: pinmux@800 {
-					compatible = "pinctrl-single";
-					reg = <0x800 0x238>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x7f>;
-				};
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
+		/*
+		 * The three following nodes are marked with opp-suspend
+		 * because the can not be enabled simultaneously on a
+		 * single SoC.
+		 */
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0x06 0x0010>;
+			opp-suspend;
 		};
 
-		intc: interrupt-controller@48200000 {
-			compatible = "ti,am33xx-intc";
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			reg = <0x48200000 0x1000>;
+		opp100-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0x00FF>;
+			opp-suspend;
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+		opp100-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0020>;
+			opp-suspend;
 		};
 
-		gpio0: gpio@44e07000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x44e07000 0x1000>;
-			interrupts = <96>;
+		opp100-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		gpio1: gpio@4804c000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x4804c000 0x1000>;
-			interrupts = <98>;
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0x06 0x0040>;
 		};
 
-		gpio2: gpio@481ac000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ac000 0x1000>;
-			interrupts = <32>;
+		opp120-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		gpio3: gpio@481ae000 {
-			compatible = "ti,omap4-gpio";
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			reg = <0x481ae000 0x1000>;
-			interrupts = <62>;
+		opp120-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0x06 0x0080>;
 		};
 
-		uart0: serial@44e09000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			reg = <0x44e09000 0x2000>;
-			interrupts = <72>;
-			status = "disabled";
-			dmas = <&edma 26>, <&edma 27>;
-			dma-names = "tx", "rx";
+		oppturbo-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x01 0xFFFF>;
 		};
 
-		uart1: serial@48022000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			reg = <0x48022000 0x2000>;
-			interrupts = <73>;
-			status = "disabled";
-			dmas = <&edma 28>, <&edma 29>;
-			dma-names = "tx", "rx";
+		oppturbo-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0x06 0x0100>;
 		};
 
-		uart2: serial@48024000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			reg = <0x48024000 0x2000>;
-			interrupts = <74>;
-			status = "disabled";
-			dmas = <&edma 30>, <&edma 31>;
-			dma-names = "tx", "rx";
+		oppnitro-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0x04 0x0200>;
 		};
+	};
 
-		uart3: serial@481a6000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-			reg = <0x481a6000 0x2000>;
-			interrupts = <44>;
-			status = "disabled";
-		};
+	target-module@4b000000 {
+		compatible = "ti,sysc-omap4-simple", "ti,sysc";
+		clocks = <&l3_clkctrl AM3_L3_L3_INSTR_CLKCTRL 0>;
+		clock-names = "fck";
+		ti,no-idle;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x4b000000 0x1000000>;
 
-		uart4: serial@481a8000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			reg = <0x481a8000 0x2000>;
-			interrupts = <45>;
-			status = "disabled";
-		};
+		target-module@140000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			clocks = <&l3_aon_clkctrl AM3_L3_AON_DEBUGSS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0xec0000>;
 
-		uart5: serial@481aa000 {
-			compatible = "ti,omap3-uart";
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			reg = <0x481aa000 0x2000>;
-			interrupts = <46>;
-			status = "disabled";
+			pmu@0 {
+				compatible = "arm,cortex-a8-pmu";
+				interrupts = <3>;
+			};
 		};
+	};
 
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <70>;
-			status = "disabled";
-		};
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+	};
 
-		i2c1: i2c@4802a000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <71>;
-			status = "disabled";
-		};
+	/*
+	 * XXX: Use a flat representation of the AM33XX interconnect.
+	 * The real AM33XX interconnect network is quite complex. Since
+	 * it will not bring real advantage to represent that in DT
+	 * for the moment, just use a fake OCP bus entry to represent
+	 * the whole bus hierarchy.
+	 */
+	ocp: ocp {
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_per>;
+		clocks = <&l3_clkctrl AM3_L3_L3_MAIN_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-		i2c2: i2c@4819c000 {
-			compatible = "ti,omap4-i2c";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <30>;
-			status = "disabled";
+		l4_wkup: interconnect@44c00000 {
 		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			ti,needs-special-hs-handling;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <64>;
-			interrupt-parent = <&intc>;
-			reg = <0x48060000 0x1000>;
-			status = "disabled";
+		l4_per: interconnect@48000000 {
 		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <28>;
-			interrupt-parent = <&intc>;
-			reg = <0x481d8000 0x1000>;
-			status = "disabled";
+		l4_fw: interconnect@47c00000 {
 		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <29>;
-			interrupt-parent = <&intc>;
-			reg = <0x47810000 0x1000>;
-			status = "disabled";
+		l4_fast: interconnect@4a000000 {
 		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
+		l4_mpuss: interconnect@4b140000 {
 		};
 
-		wdt2: wdt@44e35000 {
-			compatible = "ti,omap3-wdt";
-			ti,hwmods = "wd_timer2";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <91>;
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,am33xx-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
 		};
 
-		dcan0: can@481cc000 {
-			compatible = "ti,am3352-d_can";
-			ti,hwmods = "d_can0";
-			reg = <0x481cc000 0x2000>;
-			clocks = <&dcan0_fck>;
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM3_L3_TPCC_CLKCTRL 0>;
 			clock-names = "fck";
-			syscon-raminit = <&scm_conf 0x644 0>;
-			interrupts = <52>;
-			status = "disabled";
-		};
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
 
-		dcan1: can@481d0000 {
-			compatible = "ti,am3352-d_can";
-			ti,hwmods = "d_can1";
-			reg = <0x481d0000 0x2000>;
-			clocks = <&dcan1_fck>;
-			clock-names = "fck";
-			syscon-raminit = <&scm_conf 0x644 1>;
-			interrupts = <55>;
-			status = "disabled";
-		};
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 0>;
 
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <77>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-			mbox_wkupm3: wkup_m3 {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <0 0 3>;
+				ti,edma-memcpy-channels = <20 21>;
 			};
 		};
 
-		timer1: timer@44e31000 {
-			compatible = "ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48040000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48040000 0x400>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <69>;
-			ti,hwmods = "timer3";
-		};
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
 
-		timer4: timer@48044000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <92>;
-			ti,hwmods = "timer4";
-			ti,timer-pwm;
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		timer5: timer@48046000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <93>;
-			ti,hwmods = "timer5";
-			ti,timer-pwm;
-		};
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
 
-		timer6: timer@48048000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <94>;
-			ti,hwmods = "timer6";
-			ti,timer-pwm;
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		timer7: timer@4804a000 {
-			compatible = "ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <95>;
-			ti,hwmods = "timer7";
-			ti,timer-pwm;
-		};
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM3_L3_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
 
-		rtc: rtc@44e3e000 {
-			compatible = "ti,am3352-rtc", "ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <75
-				      76>;
-			ti,hwmods = "rtc";
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		spi0: spi@48030000 {
-			compatible = "ti,omap4-mcspi";
+		target-module@47810000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM3_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x48030000 0x400>;
-			interrupts = <65>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi0";
-			dmas = <&edma 16
-				&edma 17
-				&edma 18
-				&edma 19>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
+			#size-cells = <1>;
+			ranges = <0x0 0x47810000 0x1000>;
 
-		spi1: spi@481a0000 {
-			compatible = "ti,omap4-mcspi";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0x481a0000 0x400>;
-			interrupts = <125>;
-			ti,spi-num-cs = <2>;
-			ti,hwmods = "spi1";
-			dmas = <&edma 42
-				&edma 43
-				&edma 44
-				&edma 45>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
+			mmc3: mmc@0 {
+				compatible = "ti,am335-sdhci";
+				ti,needs-special-reset;
+				interrupts = <29>;
+				reg = <0x0 0x1000>;
+				status = "disabled";
+			};
 		};
 
-		usb: usb@47400000 {
-			compatible = "ti,am33xx-usb";
-			reg = <0x47400000 0x1000>;
-			ranges;
+		usb: target-module@47400000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x47400000 0x4>,
+			      <0x47400010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3s_clkctrl AM3_L3S_USB_OTG_HS_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ti,hwmods = "usb_otg_hs";
-			status = "disabled";
-
-			usb_ctrl_mod: control@44e10620 {
-				compatible = "ti,am335x-usb-ctrl-module";
-				reg = <0x44e10620 0x10
-					0x44e10648 0x4>;
-				reg-names = "phy_ctrl", "wakeup";
-				status = "disabled";
-			};
+			ranges = <0x0 0x47400000 0x8000>;
 
-			usb0_phy: usb-phy@47401300 {
+			usb0_phy: usb-phy@1300 {
 				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401300 0x100>;
+				reg = <0x1300 0x100>;
 				reg-names = "phy";
-				status = "disabled";
 				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
 			};
 
-			usb0: usb@47401000 {
+			usb0: usb@1400 {
 				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401400 0x400
-					0x47401000 0x200>;
+				reg = <0x1400 0x400>,
+				      <0x1000 0x200>;
 				reg-names = "mc", "control";
 
 				interrupts = <18>;
@@ -546,19 +402,18 @@
 					"tx14", "tx15";
 			};
 
-			usb1_phy: usb-phy@47401b00 {
+			usb1_phy: usb-phy@1b00 {
 				compatible = "ti,am335x-usb-phy";
-				reg = <0x47401b00 0x100>;
+				reg = <0x1b00 0x100>;
 				reg-names = "phy";
-				status = "disabled";
 				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
 			};
 
-			usb1: usb@47401800 {
+			usb1: usb@1800 {
 				compatible = "ti,musb-am33xx";
-				status = "disabled";
-				reg = <0x47401c00 0x400
-					0x47401800 0x200>;
+				reg = <0x1c00 0x400>,
+				      <0x1800 0x200>;
 				reg-names = "mc", "control";
 				interrupts = <19>;
 				interrupt-names = "mc";
@@ -593,284 +448,267 @@
 					"tx14", "tx15";
 			};
 
-			cppi41dma: dma-controller@47402000 {
+			cppi41dma: dma-controller@2000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
+				reg =  <0x0000 0x1000>,
+				       <0x2000 0x1000>,
+				       <0x3000 0x1000>,
+				       <0x4000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
-				status = "disabled";
+				dma-requests = <256>;
 			};
 		};
 
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
-			ti,hwmods = "epwmss0";
+		target-module@40300000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			clocks = <&l3_clkctrl AM3_L3_OCMCRAM_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48300100 0x48300100 0x80   /* ECAP */
-				  0x48300180 0x48300180 0x80   /* EQEP */
-				  0x48300200 0x48300200 0x80>; /* EHRPWM */
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				interrupts = <31>;
-				interrupt-names = "ecap0";
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
+			ranges = <0 0x40300000 0x10000>;
 
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
+			ocmcram: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0 0x10000>; /* 64k */
+				ranges = <0 0 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_sram_code: pm-code-sram@0 {
+					compatible = "ti,sram";
+					reg = <0x0 0x1000>;
+					protect-exec;
+				};
+
+				pm_sram_data: pm-data-sram@1000 {
+					compatible = "ti,sram";
+					reg = <0x1000 0x1000>;
+					pool;
+				};
 			};
 		};
 
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
-			ti,hwmods = "epwmss1";
+		target-module@4c000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x4c000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM3_L3_EMIF_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48302100 0x48302100 0x80   /* ECAP */
-				  0x48302180 0x48302180 0x80   /* EQEP */
-				  0x48302200 0x48302200 0x80>; /* EHRPWM */
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				interrupts = <47>;
-				interrupt-names = "ecap1";
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
-
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
+			ranges = <0x0 0x4c000000 0x1000000>;
+
+			emif: emif@0 {
+				compatible = "ti,emif-am3352";
+				reg = <0 0x1000000>;
+				interrupts = <101>;
+				sram = <&pm_sram_code
+					&pm_sram_data>;
 			};
 		};
 
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
-			ti,hwmods = "epwmss2";
+		target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000000 4>,
+			      <0x50000010 4>,
+			      <0x50000014 4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM3_L3S_GPMC_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			status = "disabled";
-			ranges = <0x48304100 0x48304100 0x80   /* ECAP */
-				  0x48304180 0x48304180 0x80   /* EQEP */
-				  0x48304200 0x48304200 0x80>; /* EHRPWM */
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				interrupts = <61>;
-				interrupt-names = "ecap2";
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
-
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
+			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+				 <0x00000000 0x00000000 0x40000000>; /* data */
+
+			gpmc: gpmc@50000000 {
+				compatible = "ti,am3352-gpmc";
+				reg = <0x50000000 0x2000>;
+				interrupts = <100>;
+				dmas = <&edma 52 0>;
+				dma-names = "rxtx";
+				gpmc,num-cs = <7>;
+				gpmc,num-waitpins = <2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
 				status = "disabled";
 			};
 		};
 
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			interrupt-parent = <&intc>;
-			/*
-			 * c0_rx_thresh_pend
-			 * c0_rx_pend
-			 * c0_tx_pend
-			 * c0_misc_pend
-			 */
-			interrupts = <40 41 42 43>;
-			ranges;
-			syscon = <&scm_conf>;
-			status = "disabled";
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,davinci_mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x4a101000 0x100>;
-				status = "disabled";
-			};
-
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am3352-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x200>;
+				interrupts = <109>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
 			};
 		};
 
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x10000>; /* 64k */
+		aes_target: target-module@53500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53500080 0x4>,
+			      <0x53500084 0x4>,
+			      <0x53500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM3_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53500000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <103>;
+				dmas = <&edma 6 0>,
+				       <&edma 5 0>;
+				dma-names = "tx", "rx";
+			};
 		};
 
-		wkup_m3: wkup_m3@44d00000 {
-			compatible = "ti,am3353-wkup-m3";
-			reg = <0x44d00000 0x4000	/* M3 UMEM */
-			       0x44d80000 0x2000>;	/* M3 DMEM */
-			ti,hwmods = "wkup_m3";
-			ti,no-reset-on-init;
-		};
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM3_GFX_L3_GFX_CLKCTRL 0>;
+			clock-names = "fck";
+			power-domains = <&prm_gfx>;
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x56000000 0x1000000>;
 
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <4>;
-			ti,hwmods = "elm";
-			status = "disabled";
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
 		};
+	};
+};
 
-		lcdc: lcdc@4830e000 {
-			compatible = "ti,am33xx-tilcdc";
-			reg = <0x4830e000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <36>;
-			ti,hwmods = "lcdc";
-			status = "disabled";
-		};
+#include "am33xx-l4.dtsi"
+#include "am33xx-clocks.dtsi"
 
-		tscadc: tscadc@44e0d000 {
-			compatible = "ti,am3359-tscadc";
-			reg = <0x44e0d000 0x1000>;
-			interrupt-parent = <&intc>;
-			interrupts = <16>;
-			ti,hwmods = "adc_tsc";
-			status = "disabled";
+&prcm {
+	prm_per: prm@c00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xc00 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
 
-			tsc {
-				compatible = "ti,am3359-tsc";
-			};
-			am335x_adc: adc {
-				#io-channel-cells = <1>;
-				compatible = "ti,am3359-adc";
-			};
-		};
+	prm_wkup: prm@d00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xd00 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
 
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			ti,no-idle-on-init;
-			reg = <0x50000000 0x2000>;
-			interrupts = <100>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
+	prm_mpu: prm@e00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xe00 0x100>;
+		#power-domain-cells = <0>;
+	};
 
-		sham: sham@53100000 {
-			compatible = "ti,omap4-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x200>;
-			interrupts = <109>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-		};
+	prm_device: prm@f00 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0xf00 0x100>;
+		#reset-cells = <1>;
+	};
 
-		aes: aes@53500000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53500000 0xa0>;
-			interrupts = <103>;
-			dmas = <&edma 6>,
-			       <&edma 5>;
-			dma-names = "tx", "rx";
-		};
+	prm_rtc: prm@1000 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1000 0x100>;
+		#power-domain-cells = <0>;
+	};
 
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-				<&edma 9>;
-			dma-names = "tx", "rx";
-		};
+	prm_gfx: prm@1100 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1100 0x100>;
+		#power-domain-cells = <0>;
+		#reset-cells = <1>;
+	};
 
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-				<&edma 11>;
-			dma-names = "tx", "rx";
-		};
+	prm_cefuse: prm@1200 {
+		compatible = "ti,am3-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1200 0x100>;
+		#power-domain-cells = <0>;
+	};
+};
 
-		rng: rng@48310000 {
-			compatible = "ti,omap4-rng";
-			ti,hwmods = "rng";
-			reg = <0x48310000 0x2000>;
-			interrupts = <111>;
-		};
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>,
+		 <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck", "ick";
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
 	};
 };
 
-/include/ "am33xx-clocks.dtsi"
+/* Preferred timer for clockevent */
+&timer2_target {
+	clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>,
+		 <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
+	clock-names = "fck", "ick";
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-craneboard.dts b/arch/arm/boot/dts/am3517-craneboard.dts
index 2d40b3f241cd..3642cfc80194 100644
--- a/arch/arm/boot/dts/am3517-craneboard.dts
+++ b/arch/arm/boot/dts/am3517-craneboard.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * See craneboard.org for more details
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
@@ -15,12 +12,12 @@
 	model = "TI AM3517 CraneBoard (TMDSEVM3517)";
 	compatible = "ti,am3517-craneboard", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>;	/* 256 MB */
 	};
 
-	vbat: fixedregulator@0 {
+	vbat: fixedregulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -77,7 +74,7 @@
 &omap3_pmx_core {
 	tps_pins: pinmux_tps_pins {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
+			OMAP3_CORE1_IOPAD(0x21e0, PIN_INPUT_PULLUP | MUX_MODE0) /* sys_nirq.sys_nirq */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/am3517-evm-ui.dtsi b/arch/arm/boot/dts/am3517-evm-ui.dtsi
new file mode 100644
index 000000000000..75ad42179aee
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-evm-ui.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2018 Logic PD, Inc - https://www.logicpd.com/
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	codec1 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_1>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	codec2 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tlv320aic23-hifi";
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic In",
+			"Line", "Line In",
+			"Line", "Line Out";
+
+		simple-audio-card,routing =
+			"Line Out", "LOUT",
+			"Line Out", "ROUT",
+			"LLINEIN", "Line In",
+			"RLINEIN", "Line In",
+			"MICIN", "Mic In";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master2>;
+		simple-audio-card,frame-master = <&sound_master2>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcbsp2>;
+		};
+
+		sound_master2: simple-audio-card,codec {
+			sound-dai = <&tlv320aic23_2>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	expander-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		key-record {
+			label = "Record";
+			/* linux,code = <BTN_0>; */
+			gpios = <&tca6416_2 15 GPIO_ACTIVE_LOW>;
+		};
+
+		key-play {
+			label = "Play";
+			linux,code = <KEY_PLAY>;
+			gpios = <&tca6416_2 14 GPIO_ACTIVE_LOW>;
+		};
+
+		key-stop {
+			label = "Stop";
+			linux,code = <KEY_STOP>;
+			gpios = <&tca6416_2 13 GPIO_ACTIVE_LOW>;
+		};
+
+		key-fwd {
+			label = "FWD";
+			linux,code = <KEY_FASTFORWARD>;
+			gpios = <&tca6416_2 12 GPIO_ACTIVE_LOW>;
+		};
+
+		key-rwd {
+			label = "RWD";
+			linux,code = <KEY_REWIND>;
+			gpios = <&tca6416_2 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key-shift {
+			label = "Shift";
+			linux,code = <KEY_LEFTSHIFT>;
+			gpios = <&tca6416_2 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key-mode {
+			label = "Mode";
+			linux,code = <BTN_MODE>;
+			gpios = <&tca6416_2 9 GPIO_ACTIVE_LOW>;
+		};
+
+		key-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&tca6416_2 8 GPIO_ACTIVE_LOW>;
+		};
+
+		key-up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&tca6416_2 7 GPIO_ACTIVE_LOW>;
+		};
+
+		key-down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&tca6416_2 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c2 {
+	/* Audio codecs */
+	tlv320aic23_1: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+	};
+
+	tlv320aic23_2: codec@1b {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1b>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	/* Audio codecs */
+	tlv320aic23_3: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		status = "okay";
+	};
+
+	/* GPIO Expanders */
+	tca6416_2: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	tca6416_3: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
+
+	/* TVP5146 Analog Video decoder input */
+	tvp5146@5c {
+		compatible = "ti,tvp5146m2";
+		reg = <0x5c>;
+	};
+};
+
+&mcbsp1 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp1_pins>;
+};
+
+&mcbsp2 {
+	status = "okay";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcbsp2_pins>;
+};
+
+&omap3_pmx_core {
+	mcbsp1_pins: pinmux_mcbsp1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dx */
+			OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT | MUX_MODE0)	/* mcbsp1_dx.mcbsp1_dr */
+			OMAP3_CORE1_IOPAD(0x2196, PIN_INPUT | MUX_MODE0)	/* mcbsp_clks.mcbsp1_fsx */
+			OMAP3_CORE1_IOPAD(0x2198, PIN_INPUT | MUX_MODE0)	/* mcbsp1_clkx.mcbsp1_clkx */
+		>;
+	};
+
+	mcbsp2_pins: pinmux_mcbsp2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0)	/* mcbsp2_fsx.mcbsp2_fsx */
+			OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0)	/* mcbsp2_clkx.mcbsp2_clkx */
+			OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0)	/* mcbsp2_dr.mcbsp2.dr */
+			OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0)	/* mcbsp2_dx.mcbsp2_dx */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index b4127c6493a2..11618aa501fc 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -1,61 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2011 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
 #include "am3517.dtsi"
+#include "am3517-som.dtsi"
+#include "am3517-evm-ui.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
 	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
-	memory {
+	aliases {
+		display0 = &lcd0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
-        vmmc_fixed: vmmc {
-                compatible = "regulator-fixed";
-                regulator-name = "vmmc_fixed";
-                regulator-min-microvolt = <3300000>;
-                regulator-max-microvolt = <3300000>;
-        };
+	vmmc_fixed: vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys-polled";
+		poll-interval = <100>;
+
+		button-user {
+			label = "User Push Button";
+			linux,code = <BTN_0>;
+			gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-1 {
+			label = "User Switch 1";
+			linux,code = <BTN_1>;
+			gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			label = "User Switch 2";
+			linux,code = <BTN_2>;
+			gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "User Switch 3";
+			linux,code = <BTN_3>;
+			gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-4 {
+			label = "User Switch 4";
+			linux,code = <BTN_4>;
+			gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-5 {
+			label = "User Switch 5";
+			linux,code = <BTN_5>;
+			gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-6 {
+			label = "User Switch 6";
+			linux,code = <BTN_6>;
+			gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-7 {
+			label = "User Switch 7";
+			linux,code = <BTN_7>;
+			gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-8 {
+			label = "User Switch 8";
+			linux,code = <BTN_8>;
+			gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins>;
+
+		user_led_1 {
+			label = "am3517evm:green:user_led_1";
+			gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_2 {
+			label = "am3517evm:green:user_led_2";
+			gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		user_led_3 {
+			label = "am3517evm:green:user_led_3";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0"; /* SD/MMC card activity */
+		};
+
+		user_led_4 {
+			label = "am3517evm:green:user_led_4";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	lcd0: display@0 {
+		/* This isn't the exact LCD, but the timings meet spec */
+		/* To make it work, set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=4 */
+		compatible = "newhaven,nhd-4.3-480272ef-atxl";
+		label = "15";
+		backlight = <&bl>;
+		enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;	/* gpio176, lcd INI */
+		vcc-supply = <&vdd_io_reg>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	bl: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		power-supply = <&vdd_io_reg>;
+		pinctrl-0 = <&backlight_pins>;
+		pwms = <&pwm11 0 5000000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
+	};
+
+	pwm11: pwm-11 {
+		compatible = "ti,omap-dmtimer-pwm";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm_pins>;
+		ti,timers = <&timer11>;
+		#pwm-cells = <3>;
+		ti,clock-source = <0x01>;
+	};
+
+	/* HS USB Host PHY on PORT 1 */
+	hsusb1_phy: hsusb1_phy {
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsusb1_rst_pins>;
+		compatible = "usb-nop-xceiv";
+		reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+		#phy-cells = <0>;
+	};
 };
 
 &davinci_emac {
-	     status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	status = "okay";
 };
 
 &davinci_mdio {
-	     status = "okay";
+	status = "okay";
 };
 
-&i2c1 {
-	clock-frequency = <400000>;
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_dpi_pins>;
+
+	vdds_dsi-supply = <&vdd_io_reg>;
+	vdda_video-supply = <&vdd_io_reg>;
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <16>;
+		};
+	};
 };
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
+	/* User DIP swithes [1:8] / User LEDS [1:2] */
+	tca6416: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&vdd_io_reg>;
+	};
 };
 
 &i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
 };
 
 &mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc_fixed>;
 	bus-width = <4>;
+	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
+	cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */
 };
 
-&mmc2 {
-      status = "disabled";
+&mmc3 {
+	status = "disabled";
 };
 
-&mmc3 {
-      status = "disabled";
+&usbhshost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hsusb1_pins>;
+	port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+	phys = <&hsusb1_phy>;
+};
+
+&omap3_pmx_core {
+
+	ethernet_pins: pinmux_ethernet_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+			OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+			OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+			OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+			OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+			OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+			OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+			OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+			OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+			OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_scl */
+			OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_scl */
+			OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c3_sda */
+		>;
+	};
+
+	leds_pins: pinmux_leds_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu0.gpio_11 */
+			OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4)	/* jtag_emu1.gpio_31 */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_clk.sdmmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_cmd.sdmmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat0.sdmmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
+			OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
+		>;
+	};
+
+	pwm_pins: pinmux_pwm_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1)       /* mcspi2_cs0.gpt11_pwm */
+		>;
+	};
+
+	backlight_pins: pinmux_backlight_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4)       /* mcspi2_cs1.gpio_182 */
+		>;
+	};
+
+	dss_dpi_pins: pinmux_dss_dpi_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4)       /* mcspi1_cs2.gpio_176 */
+			OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0)       /* dss_pclk.dss_pclk */
+			OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0)       /* dss_hsync.dss_hsync */
+			OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0)       /* dss_vsync.dss_vsync */
+			OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0)       /* dss_acbias.dss_acbias */
+			OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0)       /* dss_data0.dss_data0 */
+			OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0)       /* dss_data1.dss_data1 */
+			OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0)       /* dss_data2.dss_data2 */
+			OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0)       /* dss_data3.dss_data3 */
+			OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0)       /* dss_data4.dss_data4 */
+			OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0)       /* dss_data5.dss_data5 */
+			OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0)       /* dss_data6.dss_data6 */
+			OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0)       /* dss_data7.dss_data7 */
+			OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0)       /* dss_data8.dss_data8 */
+			OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0)       /* dss_data9.dss_data9 */
+			OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0)       /* dss_data10.dss_data10 */
+			OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0)       /* dss_data11.dss_data11 */
+			OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0)       /* dss_data12.dss_data12 */
+			OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0)       /* dss_data13.dss_data13 */
+			OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0)       /* dss_data14.dss_data14 */
+			OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
+		>;
+	};
+
+	hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)	/* gpmc_ncs6.gpio_57 */
+		>;
+	};
 };
 
+&omap3_pmx_core2 {
+
+	hsusb1_pins: pinmux_hsusb1_pins {
+		pinctrl-single,pins = <
+			OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)	/* etk_clk.hsusb1_stp */
+			OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)	/* etk_ctl.hsusb1_clk */
+			OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)	/* etk_d8.hsusb1_dir */
+			OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)	/* etk_d9.hsusb1_nxt */
+			OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)	/* etk_d0.hsusb1_data0 */
+			OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)	/* etk_d1.hsusb1_data1 */
+			OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)	/* etk_d2.hsusb1_data2 */
+			OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
+			OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)	/* etk_d4.hsusb1_data4 */
+			OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)	/* etk_d5.hsusb1_data5 */
+			OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)	/* etk_d6.hsusb1_data6 */
+			OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)	/* etk_d3.hsusb1_data7 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
new file mode 100644
index 000000000000..f7b680f6c48a
--- /dev/null
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
+ *
+ * Based on am3517-evm.dts
+ */
+
+/ {
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd_core_reg>;
+		};
+	};
+
+	wl12xx_buffer: wl12xx_buf {
+		compatible = "regulator-fixed";
+		regulator-name = "wl1271_buf";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_buffer_pins>;
+		gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+		regulator-always-on;
+		vin-supply = <&vdd_1v8_reg>;
+	};
+
+	wl12xx_vmmc2: wl12xx_vmmc2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1271";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wl12xx_wkup_pins>;
+		gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&wl12xx_buffer>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x30000000 0x1000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		linux,mtd-name = "micron,mt29f4g16abchch";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		nand-bus-width = <16>;
+		ti,nand-ecc-opt = "bch8";
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		gpmc,device-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <400000>;
+
+	s35390a: s35390a@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_pins>;
+		interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
+	};
+
+	tps: tps65023@48 {
+		compatible = "ti,tps65023";
+		reg = <0x48>;
+
+		regulators {
+			vdd_core_reg: VDCDC1 {
+				regulator-name = "vdd_core";
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vdd_io_reg: VDCDC2 {
+				regulator-name = "vdd_io";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vdd_1v8_reg: VDCDC3 {
+				regulator-name = "vdd_1v8";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb18_reg: LDO1 {
+				regulator-name = "vdd_usb18";
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vdd_usb33_reg: LDO2 {
+				regulator-name = "vdd_usb33";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+
+	touchscreen: tsc2004@4b {
+		compatible = "ti,tsc2004";
+		reg = <0x4b>;
+
+		vio-supply = <&vdd_io_reg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsc2004_pins>;
+		interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
+
+		touchscreen-fuzz-x = <4>;
+		touchscreen-fuzz-y = <7>;
+		touchscreen-fuzz-pressure = <2>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <272>;
+		touchscreen-max-pressure = <2048>;
+
+		ti,x-plate-ohms = <280>;
+		ti,esd-recovery-timeout-ms = <8000>;
+	};
+};
+
+&mmc2 {
+	interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
+
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&wl12xx_vmmc2>;
+	non-removable;
+	bus-width = <4>;
+	cap-power-off-card;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */
+		ref-clock-frequency = <26000000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+
+	bluetooth {
+		compatible = "ti,wl1271-st";
+		enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
+		max-speed = <3000000>;
+	};
+};
+
+&omap3_pmx_core {
+
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_scl */
+			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* i2c1_sda */
+		>;
+	};
+
+	wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
+			OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
+			OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat0.mmc2_dat0 */
+			OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat1.mmc2_dat1 */
+			OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat2.mmc2_dat2 */
+			OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat3.mmc2_dat3 */
+			OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
+			OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
+			OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
+			OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
+			OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4)	/* hdq_sio.gpio_170 */
+		>;
+	};
+
+	rtc_pins: pinmux_rtc_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
+		>;
+	};
+
+	tsc2004_pins: pinmux_tsc2004_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
+		>;
+	};
+
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)		/* uart2_cts */
+			OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* uart2_rts */
+			OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)		/* uart2_tx */
+			OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)		/* uart2_rx */
+			OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0)		/* gpio_56 */
+		>;
+	};
+};
+
+&omap3_pmx_wkup {
+
+	wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+		pinctrl-single,pins = <
+			OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)	/* sys_boot1.gpio_3 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 5e3f5e86ffcf..823f63502e9f 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -1,31 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for am3517 SoC
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 #include "omap3.dtsi"
 
+/* AM3517 doesn't appear to have the crypto engines defined in omap3.dtsi */
+/delete-node/ &aes1_target;
+/delete-node/ &aes2_target;
+
 / {
 	aliases {
 		serial3 = &uart4;
+		can = &hecc;
 	};
 
-	ocp {
-		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
-			ti,hwmods = "am35x_otg_hs";
-			status = "disabled";
-			reg = <0x5c040000 0x1000>;
-			interrupts = <71>;
-			interrupt-names = "mc";
+	cpus {
+		cpu: cpu@0 {
+			/* Based on OMAP3630 variants OPP50 and OPP100 */
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clock-latency = <300000>; /* From legacy driver */
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+		/*
+		 * AM3517 TRM only lists 600MHz @ 1.2V, but omap36xx
+		 * appear to operate at 300MHz as well. Since AM3517 only
+		 * lists one operating voltage, it will remain fixed at 1.2V
+		 */
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0xffffffff 0xffffffff>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1200000>;
+			opp-supported-hw = <0xffffffff 0xffffffff>;
+		};
+	};
+
+	ocp@68000000 {
+		target-module@5c040000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5c040400 0x4>,
+			      <0x5c040404 0x4>,
+			      <0x5c040408 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&hsotgusb_ick_am35xx>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5c040000 0x1000>;
+
+			am35x_otg_hs: am35x_otg_hs@0 {
+				compatible = "ti,omap3-musb";
+				status = "disabled";
+				reg = <0 0x1000>;
+				interrupts = <71>;
+				interrupt-names = "mc";
+			};
 		};
 
-		davinci_emac: ethernet@0x5c000000 {
+		davinci_emac: ethernet@5c000000 {
 			compatible = "ti,am3517-emac";
 			ti,hwmods = "davinci_emac";
 			status = "disabled";
@@ -38,9 +93,11 @@
 			ti,davinci-ctrl-ram-size = <0x2000>;
 			ti,davinci-rmii-en = /bits/ 8 <1>;
 			local-mac-address = [ 00 00 00 00 00 00 ];
+			clocks = <&emac_ick>;
+			clock-names = "ick";
 		};
 
-		davinci_mdio: ethernet@0x5c030000 {
+		davinci_mdio: mdio@5c030000 {
 			compatible = "ti,davinci_mdio";
 			ti,hwmods = "davinci_mdio";
 			status = "disabled";
@@ -48,6 +105,8 @@
 			bus_freq = <1000000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&emac_fck>;
+			clock-names = "fck";
 		};
 
 		uart4: serial@4809e000 {
@@ -66,14 +125,61 @@
 			reg = <0x480025d8 0x24>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			#pinctrl-cells = <1>;
 			#interrupt-cells = <1>;
 			interrupt-controller;
 			pinctrl-single,register-width = <16>;
 			pinctrl-single,function-mask = <0xff1f>;
 		};
+
+		hecc: can@5c050000 {
+			compatible = "ti,am3517-hecc";
+			status = "disabled";
+			reg = <0x5c050000 0x80>,
+			      <0x5c053000 0x180>,
+			      <0x5c052000 0x200>;
+			reg-names = "hecc", "hecc-ram", "mbx";
+			interrupts = <24>;
+			clocks = <&hecc_ck>;
+		};
+
+		/*
+		 * On am3517 the OCP registers do not seem to be accessible
+		 * similar to the omap34xx. Maybe SGX is permanently set to
+		 * "OCP bypass mode", or maybe there is OCP_SYSCONFIG that is
+		 * write-only at 0x50000e10. We detect SGX based on the SGX
+		 * revision register instead of the unreadable OCP revision
+		 * register.
+		 */
+		sgx_module: target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000014 0x4>;
+			reg-names = "rev";
+			clocks = <&sgx_fck>, <&sgx_ick>;
+			clock-names = "fck", "ick";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x50000000 0x4000>;
+
+			/*
+			 * Closed source PowerVR driver, no child device
+			 * binding or driver in mainline
+			 */
+		};
 	};
 };
 
+/* Not currently working, probably needs at least different clocks */
+&rng_target {
+	status = "disabled";
+	/delete-property/ clocks;
+};
+
+/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
+&usb_otg_target {
+	status = "disabled";
+};
+
 &iva {
 	status = "disabled";
 };
@@ -86,9 +192,25 @@
 	status = "disabled";
 };
 
-&smartreflex_mpu_iva {
-	status = "disabled";
+#include "am35xx-clocks.dtsi"
+#include "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt1_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
 };
 
-/include/ "am35xx-clocks.dtsi"
-/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&gpt2_fck>;
+		assigned-clock-parents = <&sys_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/am3517_mt_ventoux.dts b/arch/arm/boot/dts/am3517_mt_ventoux.dts
index fdf5ce63c8e6..e7d7124a34ba 100644
--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts
+++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2011 Ilya Yanok, EmCraft Systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 /dts-v1/;
 
@@ -11,9 +8,9 @@
 
 / {
 	model = "TeeJet Mt.Ventoux";
-	compatible = "teejet,mt_ventoux", "ti,omap3";
+	compatible = "teejet,mt_ventoux", "ti,am3517", "ti,omap3";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
diff --git a/arch/arm/boot/dts/am35xx-clocks.dtsi b/arch/arm/boot/dts/am35xx-clocks.dtsi
index 18cc826e9db5..0ee7afaa0e8e 100644
--- a/arch/arm/boot/dts/am35xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am35xx-clocks.dtsi
@@ -1,14 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for OMAP3 clock data
  *
  * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 &scm_clocks {
-	emac_ick: emac_ick {
+	emac_ick: emac_ick@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -16,7 +13,7 @@
 		ti,bit-shift = <1>;
 	};
 
-	emac_fck: emac_fck {
+	emac_fck: emac_fck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&rmii_ck>;
@@ -24,7 +21,7 @@
 		ti,bit-shift = <9>;
 	};
 
-	vpfe_ick: vpfe_ick {
+	vpfe_ick: vpfe_ick@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -32,7 +29,7 @@
 		ti,bit-shift = <2>;
 	};
 
-	vpfe_fck: vpfe_fck {
+	vpfe_fck: vpfe_fck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&pclk_ck>;
@@ -40,7 +37,7 @@
 		ti,bit-shift = <10>;
 	};
 
-	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx {
+	hsotgusb_ick_am35xx: hsotgusb_ick_am35xx@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&ipss_ick>;
@@ -48,7 +45,7 @@
 		ti,bit-shift = <0>;
 	};
 
-	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx {
+	hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@32c {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sys_ck>;
@@ -56,7 +53,7 @@
 		ti,bit-shift = <8>;
 	};
 
-	hecc_ck: hecc_ck {
+	hecc_ck: hecc_ck@32c {
 		#clock-cells = <0>;
 		compatible = "ti,am35xx-gate-clock";
 		clocks = <&sys_ck>;
@@ -65,12 +62,27 @@
 	};
 };
 &cm_clocks {
-	ipss_ick: ipss_ick {
-		#clock-cells = <0>;
-		compatible = "ti,am35xx-interface-clock";
-		clocks = <&core_l3_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <4>;
+	clock@a10 {
+		compatible = "ti,clksel";
+		reg = <0xa10>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
+
+		ipss_ick: clock-ipss-ick {
+			#clock-cells = <0>;
+			compatible = "ti,am35xx-interface-clock";
+			clock-output-names = "ipss_ick";
+			clocks = <&core_l3_ick>;
+			ti,bit-shift = <4>;
+		};
+
+		uart4_ick_am35xx: clock-uart4-ick-am35xx {
+			#clock-cells = <0>;
+			compatible = "ti,omap3-interface-clock";
+			clock-output-names = "uart4_ick_am35xx";
+			clocks = <&core_l4_ick>;
+			ti,bit-shift = <23>;
+		};
 	};
 
 	rmii_ck: rmii_ck {
@@ -85,20 +97,19 @@
 		clock-frequency = <27000000>;
 	};
 
-	uart4_ick_am35xx: uart4_ick_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,omap3-interface-clock";
-		clocks = <&core_l4_ick>;
-		reg = <0x0a10>;
-		ti,bit-shift = <23>;
-	};
+	clock@a00 {
+		compatible = "ti,clksel";
+		reg = <0xa00>;
+		#clock-cells = <2>;
+		#address-cells = <0>;
 
-	uart4_fck_am35xx: uart4_fck_am35xx {
-		#clock-cells = <0>;
-		compatible = "ti,wait-gate-clock";
-		clocks = <&core_48m_fck>;
-		reg = <0x0a00>;
-		ti,bit-shift = <23>;
+		uart4_fck_am35xx: clock-uart4-fck-am35xx {
+			#clock-cells = <0>;
+			compatible = "ti,wait-gate-clock";
+			clock-output-names = "uart4_fck_am35xx";
+			clocks = <&core_48m_fck>;
+			ti,bit-shift = <23>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/am3703.dtsi b/arch/arm/boot/dts/am3703.dtsi
new file mode 100644
index 000000000000..2b994ae790c9
--- /dev/null
+++ b/arch/arm/boot/dts/am3703.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am3715.dtsi b/arch/arm/boot/dts/am3715.dtsi
new file mode 100644
index 000000000000..ab328e8c0bd8
--- /dev/null
+++ b/arch/arm/boot/dts/am3715.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&iva {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am3874-iceboard.dts b/arch/arm/boot/dts/am3874-iceboard.dts
new file mode 100644
index 000000000000..791478e81c5a
--- /dev/null
+++ b/arch/arm/boot/dts/am3874-iceboard.dts
@@ -0,0 +1,489 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree for Winterland IceBoard
+ *
+ * https://mcgillcosmology.com
+ * https://threespeedlogic.com
+ *
+ * This is an ARM + FPGA instrumentation board used at telescopes in
+ * Antarctica (the South Pole Telescope), Chile (POLARBEAR), and at the DRAO
+ * observatory in British Columbia (CHIME).
+ *
+ * Copyright (c) 2019 Three-Speed Logic, Inc. <gsmecher@threespeedlogic.com>
+ */
+
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Winterland IceBoard";
+	compatible = "ti,dm8148", "ti,dm814";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+/* The MAC provides internal delay for the transmit path ONLY, which is enabled
+ * provided no -id/-txid/-rxid suffix is provided to "phy-mode".
+ *
+ * The receive path is delayed at the PHY. The recommended register settings
+ * are 0xf0 for the control bits, and 0x7777 for the data bits. However, the
+ * conversion code in the kernel lies: the PHY's registers are 120 ps per tap,
+ * and the kernel assumes 200 ps per tap. So we have fudged the numbers here to
+ * obtain the correct register settings.
+ */
+&mac { dual_emac = <1>; };
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <1>;
+};
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii";
+	dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0x2>;
+
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+
+		rxd3-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+
+		phy-reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <0x1>;
+
+		rxc-skew-ps = <3000>;
+		rxdv-skew-ps = <0>;
+
+		rxd3-skew-ps = <0>;
+		rxd2-skew-ps = <0>;
+		rxd1-skew-ps = <0>;
+		rxd0-skew-ps = <0>;
+
+		phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc1 { status = "disabled"; };
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+};
+&mmc3 { status = "disabled"; };
+
+&i2c1 {
+	/* Most I2C activity happens through this port, with the sole exception
+	 * of the backplane. Since there are multiply assigned addresses, the
+	 * "i2c-mux-idle-disconnect" is important.
+	 */
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			/* FMC A */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			/* FMC B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c@2 {
+			/* QSFP A */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c@3 {
+			/* QSFP B */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c@4 {
+			/* SFP */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <5000>; };
+			ina230@41 { compatible = "ti,ina230"; reg = <0x41>; shunt-resistor = <5000>; };
+			ina230@42 { compatible = "ti,ina230"; reg = <0x42>; shunt-resistor = <5000>; };
+
+			ina230@44 { compatible = "ti,ina230"; reg = <0x44>; shunt-resistor = <5000>; };
+			ina230@45 { compatible = "ti,ina230"; reg = <0x45>; shunt-resistor = <5000>; };
+			ina230@46 { compatible = "ti,ina230"; reg = <0x46>; shunt-resistor = <5000>; };
+
+			ina230@47 { compatible = "ti,ina230"; reg = <0x47>; shunt-resistor = <5500>; };
+			ina230@48 { compatible = "ti,ina230"; reg = <0x48>; shunt-resistor = <2360>; };
+			ina230@49 { compatible = "ti,ina230"; reg = <0x49>; shunt-resistor = <2360>; };
+			ina230@43 { compatible = "ti,ina230"; reg = <0x43>; shunt-resistor = <2360>; };
+			ina230@4b { compatible = "ti,ina230"; reg = <0x4b>; shunt-resistor = <5500>; };
+			ina230@4c { compatible = "ti,ina230"; reg = <0x4c>; shunt-resistor = <2360>; };
+			ina230@4d { compatible = "ti,ina230"; reg = <0x4d>; shunt-resistor = <770>; };
+			ina230@4e { compatible = "ti,ina230"; reg = <0x4e>; shunt-resistor = <770>; };
+			ina230@4f { compatible = "ti,ina230"; reg = <0x4f>; shunt-resistor = <770>; };
+		};
+
+		i2c@6 {
+			/* Backplane */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			u41: pca9575@20 {
+				compatible = "nxp,pca9575";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"FMCA_EN_12V0", "FMCA_EN_3V3", "FMCA_EN_VADJ", "FMCA_PG_M2C",
+					"FMCA_PG_C2M", "FMCA_PRSNT_M2C_L", "FMCA_CLK_DIR", "SFP_LOS",
+					"FMCB_EN_12V0", "FMCB_EN_3V3", "FMCB_EN_VADJ", "FMCB_PG_M2C",
+					"FMCB_PG_C2M", "FMCB_PRSNT_M2C_L", "FMCB_CLK_DIR", "SFP_ModPrsL";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u42: pca9575@21 {
+				compatible = "nxp,pca9575";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"QSFPA_ModPrsL", "QSFPA_IntL", "QSFPA_ResetL", "QSFPA_ModSelL",
+					"QSFPA_LPMode", "QSFPB_ModPrsL", "QSFPB_IntL", "QSFPB_ResetL",
+					"SFP_TxFault", "SFP_TxDisable", "SFP_RS0", "SFP_RS1",
+					"QSFPB_ModSelL", "QSFPB_LPMode", "SEL_SFP", "ARM_MR";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u48: pca9575@22 {
+				compatible = "nxp,pca9575";
+				reg = <0x22>;
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				sw-gpios = <&u48 0 0>, <&u48 1 0>, <&u48 2 0>, <&u48 3 0>,
+					<&u48 4 0>, <&u48 5 0>, <&u48 6 0>, <&u48 7 0>;
+				led-gpios = <&u48 7 0>, <&u48 6 0>, <&u48 5 0>, <&u48 4 0>,
+					<&u48 3 0>, <&u48 2 0>, <&u48 1 0>, <&u48 0 0>;
+
+				gpio-line-names =
+					"GP_SW1", "GP_SW2", "GP_SW3", "GP_SW4",
+					"GP_SW5", "GP_SW6", "GP_SW7", "GP_SW8",
+					"GP_LED8", "GP_LED7", "GP_LED6", "GP_LED5",
+					"GP_LED4", "GP_LED3", "GP_LED2", "GP_LED1";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			u59: pca9575@23 {
+				compatible = "nxp,pca9575";
+				reg = <0x23>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"GP_LED9", "GP_LED10", "GP_LED11", "GP_LED12",
+					"GTX1V8PowerFault", "PHYAPowerFault", "PHYBPowerFault", "ArmPowerFault",
+					"BP_SLOW_GPIO0", "BP_SLOW_GPIO1", "BP_SLOW_GPIO2", "BP_SLOW_GPIO3",
+					"BP_SLOW_GPIO4", "BP_SLOW_GPIO5", "__unused_u59_p16", "__unused_u59_p17";
+				reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			};
+
+			tmp100@48 { compatible = "ti,tmp100"; reg = <0x48>; };
+			tmp100@4a { compatible = "ti,tmp100"; reg = <0x4a>; };
+			tmp100@4b { compatible = "ti,tmp100"; reg = <0x4b>; };
+			tmp100@4c { compatible = "ti,tmp100"; reg = <0x4c>; };
+
+			/* EEPROM bank and serial number are treated as separate devices */
+			at24c01@57 { compatible = "atmel,24c01"; reg = <0x57>; };
+			at24cs01@5f { compatible = "atmel,24cs01"; reg = <0x5f>; };
+		};
+	};
+};
+
+&i2c2 {
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@6 {
+			/* Backplane */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+			multi-master;
+
+			/* All backplanes should have this -- it's how we know they're there. */
+			at24c08@54 { compatible="atmel,24c08"; reg=<0x54>; };
+			at24cs08@5c { compatible="atmel,24cs08"; reg=<0x5c>; };
+
+			/* 16 slot backplane */
+			tmp421@4d { compatible="ti,tmp421"; reg=<0x4d>; };
+			tmp421@4e { compatible="ti,tmp421"; reg=<0x4e>; };
+			ina230@40 { compatible = "ti,ina230"; reg = <0x40>; shunt-resistor = <2360>; };
+			amc6821@18 { compatible = "ti,amc6821"; reg = <0x18>; };
+
+			/* Single slot backplane */
+		};
+	};
+};
+
+&pincntl {
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP | 0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP | 0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_INPUT_PULLUP | 0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x0928, PIN_INPUT | 0x40)	/* SD1_SDWP */
+			DM814X_IOPAD(0x093C, PIN_INPUT | 0x2)	/* SD1_SDCD */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+
+	gpio1_pins: pinmux_gpio1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x081c, PIN_OUTPUT | 0x80)	/* PROGRAM_B */
+			DM814X_IOPAD(0x0820, PIN_INPUT | 0x80)	/* INIT_B */
+			DM814X_IOPAD(0x0824, PIN_INPUT | 0x80)	/* DONE */
+
+			DM814X_IOPAD(0x0838, PIN_INPUT_PULLUP | 0x80) /* FMCA_TMS */
+			DM814X_IOPAD(0x083c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TCK */
+			DM814X_IOPAD(0x0898, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDO */
+			DM814X_IOPAD(0x089c, PIN_INPUT_PULLUP | 0x80) /* FMCA_TDI */
+			DM814X_IOPAD(0x08ac, PIN_INPUT_PULLUP | 0x80) /* FMCA_TRST */
+
+			DM814X_IOPAD(0x08b0, PIN_INPUT_PULLUP | 0x80) /* FMCB_TMS */
+			DM814X_IOPAD(0x0a88, PIN_INPUT_PULLUP | 0x80) /* FMCB_TCK */
+			DM814X_IOPAD(0x0a8c, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDO */
+			DM814X_IOPAD(0x08bc, PIN_INPUT_PULLUP | 0x80) /* FMCB_TDI */
+			DM814X_IOPAD(0x0a94, PIN_INPUT_PULLUP | 0x80) /* FMCB_TRST */
+
+			DM814X_IOPAD(0x08d4, PIN_INPUT_PULLUP | 0x80) /* FPGA_TMS */
+			DM814X_IOPAD(0x0aa8, PIN_INPUT_PULLUP | 0x80) /* FPGA_TCK */
+			DM814X_IOPAD(0x0adc, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDO */
+			DM814X_IOPAD(0x0ab0, PIN_INPUT_PULLUP | 0x80) /* FPGA_TDI */
+			>;
+	};
+
+	gpio2_pins: pinmux_gpio2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x090c, PIN_INPUT_PULLUP | 0x80) /* PHY A IRQ */
+			DM814X_IOPAD(0x0910, PIN_INPUT_PULLUP | 0x80) /* PHY A RESET */
+			DM814X_IOPAD(0x08f4, PIN_INPUT_PULLUP | 0x80) /* PHY B IRQ */
+			DM814X_IOPAD(0x08f8, PIN_INPUT_PULLUP | 0x80) /* PHY B RESET */
+
+			//DM814X_IOPAD(0x0a14, PIN_INPUT_PULLUP | 0x80) /* ARM IRQ */
+			//DM814X_IOPAD(0x0900, PIN_INPUT | 0x80) /* GPIO IRQ */
+			DM814X_IOPAD(0x0a2c, PIN_INPUT_PULLUP | 0x80) /* GPIO RESET */
+		>;
+	};
+
+	gpio4_pins: pinmux_gpio4_pins {
+		pinctrl-single,pins = <
+			/* The PLL doesn't react well to the SPI controller reset, so
+			 * we force the CS lines to pull up as GPIOs until we're ready.
+			 * See https://e2e.ti.com/support/processors/f/791/t/276011?Linux-support-for-AM3874-DM8148-in-Arago-linux-omap3
+			 */
+			DM814X_IOPAD(0x0b3c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO0 */
+			DM814X_IOPAD(0x0b40, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO1 */
+			DM814X_IOPAD(0x0b44, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO2 */
+			DM814X_IOPAD(0x0b48, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO3 */
+			DM814X_IOPAD(0x0b4c, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO4 */
+			DM814X_IOPAD(0x0b50, PIN_INPUT_PULLUP | 0x80) /* BP_ARM_GPIO5 */
+		>;
+	};
+
+	spi2_pins: pinmux_spi2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0950, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS1 as GPIO */
+			DM814X_IOPAD(0x0818, PIN_INPUT_PULLUP | 0x80) /* PLL SPI CS2 as GPIO */
+		>;
+	};
+
+	spi4_pins: pinmux_spi4_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0a7c, 0x20)
+			DM814X_IOPAD(0x0b74, 0x20)
+			DM814X_IOPAD(0x0b78, PIN_OUTPUT | 0x20)
+			DM814X_IOPAD(0x0b7c, PIN_OUTPUT_PULLDOWN | 0x20)
+			DM814X_IOPAD(0x0b80, PIN_INPUT | 0x20)
+		>;
+	};
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio1_pins>;
+	gpio-line-names =
+		"", "PROGRAM_B", "INIT_B", "DONE",			/* 0-3 */
+		"", "", "", "",						/* 4-7 */
+		"FMCA_TMS", "FMCA_TCK", "FMCA_TDO", "FMCA_TDI",		/* 8-11 */
+		"", "", "", "FMCA_TRST",				/* 12-15 */
+		"FMCB_TMS", "FMCB_TCK", "FMCB_TDO", "FMCB_TDI",		/* 16-19 */
+		"FMCB_TRST", "", "", "",				/* 20-23 */
+		"FPGA_TMS", "FPGA_TCK", "FPGA_TDO", "FPGA_TDI",		/* 24-27 */
+		"", "", "", "";						/* 28-31 */
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio2_pins>;
+	gpio-line-names =
+		"PHYA_IRQ_N", "PHYA_RESET_N", "", "",			/* 0-3 */
+		"", "", "", "PHYB_IRQ_N",				/* 4-7 */
+		"PHYB_RESET_N", "ARM_IRQ", "GPIO_IRQ", "";		/* 8-11 */
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	/*pinctrl-0 = <&gpio3_pins>;*/
+	gpio-line-names =
+		"", "", "ARMClkSel0", "",				/* 0-3 */
+		"EnFPGARef", "", "", "ARMClkSel1";			/* 4-7 */
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio4_pins>;
+	gpio-line-names =
+		"BP_ARM_GPIO0", "BP_ARM_GPIO1", "BP_ARM_GPIO2", "BP_ARM_GPIO3",
+		"BP_ARM_GPIO4", "BP_ARM_GPIO5";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
+
+&mcspi1 {
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		fsbl@0 {
+			/* 256 kB */
+			label = "U-Boot-min";
+			reg = <0 0x40000>;
+		};
+		ssbl@1 {
+			/* 512 kB */
+			label = "U-Boot";
+			reg = <0x40000 0x80000>;
+		};
+		bootenv@2 {
+			/* 256 kB */
+			label = "U-Boot Env";
+			reg = <0xc0000 0x40000>;
+		};
+		kernel@3 {
+			/* 4 MB */
+			label = "Kernel";
+			reg = <0x100000 0x400000>;
+		};
+		ipmi@4 {
+			label = "IPMI FRU";
+			reg = <0x500000 0x40000>;
+		};
+		fs@5 {
+			label = "File System";
+			reg = <0x540000 0x1ac0000>;
+		};
+	};
+};
+
+&mcspi3 {
+	/* DMA event numbers stolen from MCASP */
+	dmas = <&edma_xbar 8 0 16 &edma_xbar 9 0 17
+		&edma_xbar 10 0 18 &edma_xbar 11 0 19>;
+	dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
+&mcspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins>;
+
+	/* DMA event numbers stolen from MCASP, MCBSP */
+	dmas = <&edma_xbar 12 0 20 &edma_xbar 13 0 21>;
+	dma-names = "tx0", "rx0";
+};
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index ade28c790f4b..8613355bbd5e 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -1,30 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM4372 SoC
  *
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-
-#include "skeleton.dtsi"
+#include <dt-bindings/clock/am4.h>
 
 / {
 	compatible = "ti,am4372", "ti,am43";
 	interrupt-parent = <&wakeupgen>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
 
 	aliases {
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
 		i2c2 = &i2c2;
 		serial0 = &uart0;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		spi0 = &qspi;
 	};
 
 	cpus {
@@ -32,16 +42,70 @@
 		#size-cells = <0>;
 		cpu: cpu@0 {
 			compatible = "arm,cortex-a9";
+			enable-method = "ti,am4372";
 			device_type = "cpu";
 			reg = <0>;
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
 
+			operating-points-v2 = <&cpu0_opp_table>;
+
 			clock-latency = <300000>; /* From omap-cpufreq driver */
+			cpu-idle-states = <&mpu_gate>;
+		};
+
+		idle-states {
+			mpu_gate: mpu_gate {
+				compatible = "arm,idle-state";
+				entry-latency-us = <40>;
+				exit-latency-us = <100>;
+				min-residency-us = <300>;
+				local-timer-stop;
+			};
 		};
 	};
 
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_conf>;
+
+		opp50-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <950000 931000 969000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp100-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1100000 1078000 1122000>;
+			opp-supported-hw = <0xFF 0x04>;
+		};
+
+		opp120-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-microvolt = <1200000 1176000 1224000>;
+			opp-supported-hw = <0xFF 0x08>;
+		};
+
+		oppturbo-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1260000 1234800 1285200>;
+			opp-supported-hw = <0xFF 0x10>;
+		};
+
+		oppnitro-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1325000 1298500 1351500>;
+			opp-supported-hw = <0xFF 0x20>;
+		};
+	};
+
+	soc {
+		compatible = "ti,omap-infra";
+	};
+
 	gic: interrupt-controller@48241000 {
 		compatible = "arm,cortex-a9-gic";
 		interrupt-controller;
@@ -59,941 +123,679 @@
 		interrupt-parent = <&gic>;
 	};
 
-	l2-cache-controller@48242000 {
+	scu: scu@48240000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x48240000 0x100>;
+	};
+
+	global_timer: timer@48240200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0x48240200 0x100>;
+		interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gic>;
+		clocks = <&mpu_periphclk>;
+	};
+
+	local_timer: timer@48240600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x48240600 0x100>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&gic>;
+		clocks = <&mpu_periphclk>;
+	};
+
+	cache-controller@48242000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x48242000 0x1000>;
 		cache-unified;
 		cache-level = <2>;
 	};
 
-	ocp {
-		compatible = "ti,am4372-l3-noc", "simple-bus";
+	ocp@44000000 {
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_per>;
+		clocks = <&l3_clkctrl AM4_L3_L3_MAIN_CLKCTRL 0>;
+		clock-names = "fck";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		ti,hwmods = "l3_main";
-		reg = <0x44000000 0x400000
-		       0x44800000 0x400000>;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		l4_wkup: l4_wkup@44c00000 {
-			compatible = "ti,am4-l4-wkup", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x44c00000 0x287000>;
-
-			prcm: prcm@1f0000 {
-				compatible = "ti,am4-prcm";
-				reg = <0x1f0000 0x11000>;
-
-				prcm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prcm_clockdomains: clockdomains {
-				};
-			};
-
-			scm: scm@210000 {
-				compatible = "ti,am4-scm", "simple-bus";
-				reg = <0x210000 0x4000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x210000 0x4000>;
-
-				am43xx_pinmux: pinmux@800 {
-					compatible = "ti,am437-padconf",
-						     "pinctrl-single";
-					reg = <0x800 0x31c>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0xffffffff>;
-				};
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon";
-					reg = <0x0 0x800>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					scm_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				scm_clockdomains: clockdomains {
-				};
-			};
-		};
-
-		emif: emif@4c000000 {
-			compatible = "ti,emif-am4372";
-			reg = <0x4c000000 0x1000000>;
-			ti,hwmods = "emif";
-		};
-
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
-			reg =	<0x49000000 0x10000>,
-				<0x44e10f90 0x10>;
-			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-		};
-
-		uart0: serial@44e09000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x44e09000 0x2000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-		};
-
-		uart1: serial@48022000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48022000 0x2000>;
-			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			status = "disabled";
-		};
-
-		uart2: serial@48024000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x48024000 0x2000>;
-			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			status = "disabled";
-		};
-
-		uart3: serial@481a6000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a6000 0x2000>;
-			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			status = "disabled";
-		};
-
-		uart4: serial@481a8000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481a8000 0x2000>;
-			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			status = "disabled";
-		};
-
-		uart5: serial@481aa000 {
-			compatible = "ti,am4372-uart","ti,omap2-uart";
-			reg = <0x481aa000 0x2000>;
-			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			status = "disabled";
-		};
-
-		mailbox: mailbox@480C8000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x480C8000 0x200>;
-			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <8>;
-			mbox_wkupm3: wkup_m3 {
-				ti,mbox-tx = <0 0 0>;
-				ti,mbox-rx = <0 0 3>;
-			};
-		};
-
-		timer1: timer@44e31000 {
-			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
-			reg = <0x44e31000 0x400>;
-			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-alwon;
-			ti,hwmods = "timer1";
-		};
-
-		timer2: timer@48040000  {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48040000  0x400>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48042000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48042000 0x400>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-			status = "disabled";
-		};
-
-		timer4: timer@48044000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48044000 0x400>;
-			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer4";
-			status = "disabled";
-		};
-
-		timer5: timer@48046000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48046000 0x400>;
-			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer5";
-			status = "disabled";
-		};
-
-		timer6: timer@48048000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48048000 0x400>;
-			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer6";
-			status = "disabled";
-		};
-
-		timer7: timer@4804a000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4804a000 0x400>;
-			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
-			ti,timer-pwm;
-			ti,hwmods = "timer7";
-			status = "disabled";
-		};
-
-		timer8: timer@481c1000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x481c1000 0x400>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
-			status = "disabled";
-		};
-
-		timer9: timer@4833d000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833d000 0x400>;
-			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-			status = "disabled";
-		};
-
-		timer10: timer@4833f000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x4833f000 0x400>;
-			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
-			status = "disabled";
-		};
-
-		timer11: timer@48341000 {
-			compatible = "ti,am4372-timer","ti,am335x-timer";
-			reg = <0x48341000 0x400>;
-			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-			status = "disabled";
-		};
-
-		counter32k: counter@44e86000 {
-			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
-			reg = <0x44e86000 0x40>;
-			ti,hwmods = "counter_32k";
-		};
-
-		rtc: rtc@44e3e000 {
-			compatible = "ti,am4372-rtc","ti,da830-rtc";
-			reg = <0x44e3e000 0x1000>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "rtc";
-			status = "disabled";
-		};
-
-		wdt: wdt@44e35000 {
-			compatible = "ti,am4372-wdt","ti,omap3-wdt";
-			reg = <0x44e35000 0x1000>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		gpio0: gpio@44e07000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x44e07000 0x1000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio1";
-			status = "disabled";
-		};
-
-		gpio1: gpio@4804c000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x4804c000 0x1000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio2";
-			status = "disabled";
-		};
-
-		gpio2: gpio@481ac000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ac000 0x1000>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio3";
-			status = "disabled";
-		};
-
-		gpio3: gpio@481ae000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x481ae000 0x1000>;
-			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio4";
-			status = "disabled";
-		};
+		ti,no-idle;
 
-		gpio4: gpio@48320000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48320000 0x1000>;
-			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio5";
-			status = "disabled";
+		l3-noc@44000000 {
+			compatible = "ti,am4372-l3-noc";
+			reg = <0x44000000 0x400000>,
+			      <0x44800000 0x400000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		gpio5: gpio@48322000 {
-			compatible = "ti,am4372-gpio","ti,omap4-gpio";
-			reg = <0x48322000 0x1000>;
-			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			ti,hwmods = "gpio6";
-			status = "disabled";
+		l4_wkup: interconnect@44c00000 {
 		};
-
-		hwspinlock: spinlock@480ca000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x480ca000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
+		l4_per: interconnect@48000000 {
 		};
-
-		i2c0: i2c@44e0b000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x44e0b000 0x1000>;
-			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4802a000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4802a000 0x1000>;
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c2: i2c@4819c000 {
-			compatible = "ti,am4372-i2c","ti,omap4-i2c";
-			reg = <0x4819c000 0x1000>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "i2c3";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
+		l4_fast: interconnect@4a000000 {
 		};
 
-		spi0: spi@48030000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48030000 0x400>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi0";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mmc1: mmc@48060000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x48060000 0x1000>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&edma 24
-				&edma 25>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc2: mmc@481d8000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x481d8000 0x1000>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&edma 2
-				&edma 3>;
-			dma-names = "tx", "rx";
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		mmc3: mmc@47810000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x47810000 0x1000>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		spi1: spi@481a0000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a0000 0x400>;
-			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi1";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi2: spi@481a2000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a2000 0x400>;
-			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi2";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		spi3: spi@481a4000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x481a4000 0x400>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi3";
+		target-module@4c000000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x4c000000 0x4>;
+			reg-names = "rev";
+			clocks = <&emif_clkctrl AM4_EMIF_EMIF_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
 			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000000 0x1000000>;
+
+			emif: emif@0 {
+				compatible = "ti,emif-am4372";
+				reg = <0 0x1000000>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				sram = <&pm_sram_code
+					&pm_sram_data>;
+			};
 		};
 
-		spi4: spi@48345000 {
-			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
-			reg = <0x48345000 0x400>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "spi4";
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&l3_clkctrl AM4_L3_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 0>;
+
+				ti,edma-memcpy-channels = <58 59>;
+			};
 		};
 
-		mac: ethernet@4a100000 {
-			compatible = "ti,am4372-cpsw","ti,cpsw";
-			reg = <0x4a100000 0x800
-			       0x4a101200 0x100>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
-				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ti,hwmods = "cpgmac0";
-			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-			clock-names = "fck", "cpts";
-			status = "disabled";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			ranges;
-
-			davinci_mdio: mdio@4a101000 {
-				compatible = "ti,am4372-mdio","ti,davinci_mdio";
-				reg = <0x4a101000 0x100>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				status = "disabled";
-			};
+			ranges = <0x0 0x49800000 0x100000>;
 
-			cpsw_emac0: slave@4a100200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			cpsw_emac1: slave@4a100300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
-			};
-
-			phy_sel: cpsw-phy-sel@44e10650 {
-				compatible = "ti,am43xx-cpsw-phy-sel";
-				reg= <0x44e10650 0x4>;
-				reg-names = "gmii-sel";
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
 			};
 		};
 
-		epwmss0: epwmss@48300000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48300000 0x10>;
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss0";
-			status = "disabled";
-
-			ecap0: ecap@48300100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48300100 0x80>;
-				ti,hwmods = "ecap0";
-				status = "disabled";
-			};
+			ranges = <0x0 0x49900000 0x100000>;
 
-			ehrpwm0: ehrpwm@48300200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48300200 0x80>;
-				ti,hwmods = "ehrpwm0";
-				status = "disabled";
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
 			};
 		};
 
-		epwmss1: epwmss@48302000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48302000 0x10>;
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3_clkctrl AM4_L3_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss1";
-			status = "disabled";
-
-			ecap1: ecap@48302100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48302100 0x80>;
-				ti,hwmods = "ecap1";
-				status = "disabled";
-			};
+			ranges = <0x0 0x49a00000 0x100000>;
 
-			ehrpwm1: ehrpwm@48302200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48302200 0x80>;
-				ti,hwmods = "ehrpwm1";
-				status = "disabled";
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
 			};
 		};
 
-		epwmss2: epwmss@48304000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48304000 0x10>;
+		target-module@47810000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x478102fc 0x4>,
+			      <0x47810110 0x4>,
+			      <0x47810114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM4_L3S_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss2";
-			status = "disabled";
-
-			ecap2: ecap@48304100 {
-				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
-				#pwm-cells = <3>;
-				reg = <0x48304100 0x80>;
-				ti,hwmods = "ecap2";
-				status = "disabled";
-			};
+			ranges = <0x0 0x47810000 0x1000>;
 
-			ehrpwm2: ehrpwm@48304200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48304200 0x80>;
-				ti,hwmods = "ehrpwm2";
+			mmc3: mmc@0 {
+				compatible = "ti,am437-sdhci";
+				ti,needs-special-reset;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg = <0x0 0x1000>;
 				status = "disabled";
 			};
 		};
 
-		epwmss3: epwmss@48306000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48306000 0x10>;
+		sham_target: target-module@53100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x53100100 0x4>,
+			      <0x53100110 0x4>,
+			      <0x53100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss3";
-			status = "disabled";
-
-			ehrpwm3: ehrpwm@48306200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48306200 0x80>;
-				ti,hwmods = "ehrpwm3";
-				status = "disabled";
+			ranges = <0x0 0x53100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				dmas = <&edma 36 0>;
+				dma-names = "rx";
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
-		epwmss4: epwmss@48308000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x48308000 0x10>;
+		aes_target: target-module@53501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53501080 0x4>,
+			      <0x53501084 0x4>,
+			      <0x53501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_AES_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss4";
-			status = "disabled";
-
-			ehrpwm4: ehrpwm@48308200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x48308200 0x80>;
-				ti,hwmods = "ehrpwm4";
-				status = "disabled";
+			ranges = <0x0 0x53501000 0x1000>;
+
+			aes: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 6 0>,
+				      <&edma 5 0>;
+				dma-names = "tx", "rx";
 			};
 		};
 
-		epwmss5: epwmss@4830a000 {
-			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
-			reg = <0x4830a000 0x10>;
+		des_target: target-module@53701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53701030 0x4>,
+			      <0x53701034 0x4>,
+			      <0x53701038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l3_clkdm */
+			clocks = <&l3_clkctrl AM4_L3_DES_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "epwmss5";
-			status = "disabled";
-
-			ehrpwm5: ehrpwm@4830a200 {
-				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
-				#pwm-cells = <3>;
-				reg = <0x4830a200 0x80>;
-				ti,hwmods = "ehrpwm5";
-				status = "disabled";
+			ranges = <0 0x53701000 0x1000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma 34 0>,
+				       <&edma 33 0>;
+				dma-names = "tx", "rx";
 			};
 		};
 
-		tscadc: tscadc@44e0d000 {
-			compatible = "ti,am3359-tscadc";
-			reg = <0x44e0d000 0x1000>;
-			ti,hwmods = "adc_tsc";
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adc_tsc_fck>;
+		pruss_tm: target-module@54400000 {
+			compatible = "ti,sysc-pruss", "ti,sysc";
+			reg = <0x54426000 0x4>,
+			      <0x54426004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+					 SYSC_PRUSS_SUB_MWAIT)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&pruss_ocp_clkctrl AM4_PRUSS_OCP_PRUSS_CLKCTRL 0>;
 			clock-names = "fck";
-			status = "disabled";
+			resets = <&prm_per 1>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54400000 0x80000>;
 
-			tsc {
-				compatible = "ti,am3359-tsc";
-			};
+			pruss1: pruss@0 {
+				compatible = "ti,am4376-pruss1";
+				reg = <0x0 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				pruss1_mem: memories@0 {
+					reg = <0x0 0x2000>,
+					      <0x2000 0x2000>,
+					      <0x10000 0x8000>;
+					reg-names = "dram0", "dram1",
+						    "shrdram2";
+				};
 
-			adc {
-				#io-channel-cells = <1>;
-				compatible = "ti,am3359-adc";
-			};
+				pruss1_cfg: cfg@26000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x26000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x26000 0x2000>;
 
-		};
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
 
-		sham: sham@53100000 {
-			compatible = "ti,omap5-sham";
-			ti,hwmods = "sham";
-			reg = <0x53100000 0x300>;
-			dmas = <&edma 36>;
-			dma-names = "rx";
-			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-		};
+						pruss1_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&sysclk_div>,     /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
 
-		aes: aes@53501000 {
-			compatible = "ti,omap4-aes";
-			ti,hwmods = "aes";
-			reg = <0x53501000 0xa0>;
-			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 6
-				&edma 5>;
-			dma-names = "tx", "rx";
-		};
+				pruss1_mii_rt: mii-rt@32000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x32000 0x58>;
+				};
 
-		des: des@53701000 {
-			compatible = "ti,omap4-des";
-			ti,hwmods = "des";
-			reg = <0x53701000 0xa0>;
-			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&edma 34
-				&edma 33>;
-			dma-names = "tx", "rx";
-		};
+				pruss1_intc: interrupt-controller@20000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x20000 0x2000>;
+					interrupt-controller;
+					#interrupt-cells = <3>;
+					interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4",
+							  "host_intr6", "host_intr7";
+					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+				};
 
-		mcasp0: mcasp@48038000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp0";
-			reg = <0x48038000 0x2000>,
-			      <0x46000000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <80>, <81>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 8>,
-			       <&edma 9>;
-			dma-names = "tx", "rx";
-		};
+				pru1_0: pru@34000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x34000 0x3000>,
+					      <0x22000 0x400>,
+					      <0x22400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru1_0-fw";
+				};
 
-		mcasp1: mcasp@4803C000 {
-			compatible = "ti,am33xx-mcasp-audio";
-			ti,hwmods = "mcasp1";
-			reg = <0x4803C000 0x2000>,
-			      <0x46400000 0x400000>;
-			reg-names = "mpu", "dat";
-			interrupts = <82>, <83>;
-			interrupt-names = "tx", "rx";
-			status = "disabled";
-			dmas = <&edma 10>,
-			       <&edma 11>;
-			dma-names = "tx", "rx";
-		};
+				pru1_1: pru@38000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x38000 0x3000>,
+					      <0x24000 0x400>,
+					      <0x24400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru1_1-fw";
+				};
 
-		elm: elm@48080000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48080000 0x2000>;
-			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			clocks = <&l4ls_gclk>;
-			clock-names = "fck";
-			status = "disabled";
-		};
+				pruss1_mdio: mdio@32400 {
+					compatible = "ti,davinci_mdio";
+					reg = <0x32400 0x90>;
+					clocks = <&dpll_core_m4_ck>;
+					clock-names = "fck";
+					bus_freq = <1000000>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+			};
 
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			clocks = <&l3s_gclk>;
-			clock-names = "fck";
-			reg = <0x50000000 0x2000>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <7>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
+			pruss0: pruss@40000 {
+				compatible = "ti,am4376-pruss0";
+				reg = <0x40000 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
 
-		am43xx_control_usb2phy1: control-phy@44e10620 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10620 0x4>;
-			reg-names = "power";
-		};
+				pruss0_mem: memories@40000 {
+					reg = <0x40000 0x1000>,
+					      <0x42000 0x1000>;
+					reg-names = "dram0", "dram1";
+				};
 
-		am43xx_control_usb2phy2: control-phy@0x44e10628 {
-			compatible = "ti,control-phy-usb2-am437";
-			reg = <0x44e10628 0x4>;
-			reg-names = "power";
-		};
+				pruss0_cfg: cfg@66000 {
+					compatible = "ti,pruss-cfg", "syscon";
+					reg = <0x66000 0x2000>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0x0 0x66000 0x2000>;
 
-		ocp2scp0: ocp2scp@483a8000 {
-			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp0";
-
-			usb2_phy1: phy@483a8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483a8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy1>;
-				clocks = <&usb_phy0_always_on_clk32k>,
-					 <&usb_otg_ss0_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
-				status = "disabled";
+					clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						pruss0_iepclk_mux: iepclk-mux@30 {
+							reg = <0x30>;
+							#clock-cells = <0>;
+							clocks = <&sysclk_div>,     /* icss_iep_gclk */
+								 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
+						};
+					};
+				};
+
+				pruss0_mii_rt: mii-rt@72000 {
+					compatible = "ti,pruss-mii", "syscon";
+					reg = <0x72000 0x58>;
+					status = "disabled";
+				};
+
+				pruss0_intc: interrupt-controller@60000 {
+					compatible = "ti,pruss-intc";
+					reg = <0x60000 0x2000>;
+					interrupt-controller;
+					#interrupt-cells = <3>;
+					interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "host_intr0", "host_intr1",
+							  "host_intr2", "host_intr3",
+							  "host_intr4",
+							  "host_intr6", "host_intr7";
+					ti,irqs-reserved = /bits/ 8 <0x20>; /* BIT(5) */
+				};
+
+				pru0_0: pru@74000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x74000 0x1000>,
+					      <0x62000 0x400>,
+					      <0x62400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru0_0-fw";
+				};
+
+				pru0_1: pru@78000 {
+					compatible = "ti,am4376-pru";
+					reg = <0x78000 0x1000>,
+					      <0x64000 0x400>,
+					      <0x64400 0x100>;
+					reg-names = "iram", "control", "debug";
+					firmware-name = "am437x-pru0_1-fw";
+				};
 			};
 		};
 
-		ocp2scp1: ocp2scp@483e8000 {
-			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+		target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000000 4>,
+			      <0x50000010 4>,
+			      <0x50000014 4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3s_clkctrl AM4_L3S_GPMC_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy2: phy@483e8000 {
-				compatible = "ti,am437x-usb2";
-				reg = <0x483e8000 0x8000>;
-				ctrl-module = <&am43xx_control_usb2phy2>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names = "wkupclk", "refclk";
-				#phy-cells = <0>;
+			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+				 <0x00000000 0x00000000 0x40000000>; /* data */
+
+			gpmc: gpmc@50000000 {
+				compatible = "ti,am3352-gpmc";
+				dmas = <&edma 52 0>;
+				dma-names = "rxtx";
+				clocks = <&l3s_gclk>;
+				clock-names = "fck";
+				reg = <0x50000000 0x2000>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				gpmc,num-cs = <7>;
+				gpmc,num-waitpins = <2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
 				status = "disabled";
 			};
 		};
 
-		dwc3_1: omap_dwc3@48380000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss0";
-			reg = <0x48380000 0x10000>;
-			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@47900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x47900000 0x4>,
+			      <0x47900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l3s_clkctrl AM4_L3S_QSPI_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb1: usb@48390000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x48390000 0x10000>;
-				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy1>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
+			ranges = <0x0 0x47900000 0x1000>,
+				 <0x30000000 0x30000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,am4372-qspi";
+				reg = <0 0x100>,
+				      <0x30000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				clocks = <&dpll_per_m2_div4_ck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <0 138 0x4>;
+				num-cs = <4>;
 			};
 		};
 
-		dwc3_2: omap_dwc3@483c0000 {
-			compatible = "ti,am437x-dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x483c0000 0x10000>;
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@40300000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			clocks = <&l3_clkctrl AM4_L3_OCMCRAM_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
 			#address-cells = <1>;
 			#size-cells = <1>;
-			utmi-mode = <1>;
-			ranges;
-
-			usb2: usb@483d0000 {
-				compatible = "synopsys,dwc3";
-				reg = <0x483d0000 0x10000>;
-				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				status = "disabled";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
+			ranges = <0 0x40300000 0x40000>;
 
-		qspi: qspi@47900000 {
-			compatible = "ti,am4372-qspi";
-			reg = <0x47900000 0x100>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			interrupts = <0 138 0x4>;
-			num-cs = <4>;
-			status = "disabled";
-		};
+			ocmcram: sram@0 {
+				compatible = "mmio-sram";
+				reg = <0 0x40000>; /* 256k */
+				ranges = <0 0 0x40000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 
-		hdq: hdq@48347000 {
-			compatible = "ti,am4372-hdq";
-			reg = <0x48347000 0x1000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&func_12m_clk>;
-			clock-names = "fck";
-			ti,hwmods = "hdq1w";
-			status = "disabled";
+				pm_sram_code: pm-code-sram@0 {
+					compatible = "ti,sram";
+					reg = <0x0 0x1000>;
+					protect-exec;
+				};
+
+				pm_sram_data: pm-data-sram@1000 {
+					compatible = "ti,sram";
+					reg = <0x1000 0x1000>;
+					pool;
+				};
+			};
 		};
 
-		dss: dss@4832a000 {
-			compatible = "ti,omap3-dss";
-			reg = <0x4832a000 0x200>;
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			clocks = <&disp_clk>;
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gfx_l3_clkctrl AM4_GFX_L3_GFX_CLKCTRL 0>;
 			clock-names = "fck";
+			power-domains = <&prm_gfx>;
+			resets = <&prm_gfx 0>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-
-			dispc: dispc@4832a400 {
-				compatible = "ti,omap3-dispc";
-				reg = <0x4832a400 0x400>;
-				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-			};
-
-			rfbi: rfbi@4832a800 {
-				compatible = "ti,omap3-rfbi";
-				reg = <0x4832a800 0x100>;
-				ti,hwmods = "dss_rfbi";
-				clocks = <&disp_clk>;
-				clock-names = "fck";
-				status = "disabled";
-			};
+			ranges = <0 0x56000000 0x1000000>;
 		};
+	};
+};
 
-		ocmcram: ocmcram@40300000 {
-			compatible = "mmio-sram";
-			reg = <0x40300000 0x40000>; /* 256k */
-		};
+#include "am437x-l4.dtsi"
+#include "am43xx-clocks.dtsi"
 
-		dcan0: can@481cc000 {
-			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			ti,hwmods = "d_can0";
-			clocks = <&dcan0_fck>;
-			clock-names = "fck";
-			reg = <0x481cc000 0x2000>;
-			syscon-raminit = <&scm_conf 0x644 0>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
+&prcm {
+	prm_mpu: prm@300 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x300 0x100>;
+		#power-domain-cells = <0>;
+	};
 
-		dcan1: can@481d0000 {
-			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
-			ti,hwmods = "d_can1";
-			clocks = <&dcan1_fck>;
-			clock-names = "fck";
-			reg = <0x481d0000 0x2000>;
-			syscon-raminit = <&scm_conf 0x644 1>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
+	prm_gfx: prm@400 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#power-domain-cells = <0>;
+		#reset-cells = <1>;
+	};
 
-		vpfe0: vpfe@48326000 {
-			compatible = "ti,am437x-vpfe";
-			reg = <0x48326000 0x2000>;
-			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "vpfe0";
-			status = "disabled";
-		};
+	prm_rtc: prm@500 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x500 0x100>;
+		#power-domain-cells = <0>;
+	};
 
-		vpfe1: vpfe@48328000 {
-			compatible = "ti,am437x-vpfe";
-			reg = <0x48328000 0x2000>;
-			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "vpfe1";
-			status = "disabled";
-		};
+	prm_tamper: prm@600 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x600 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_cefuse: prm@700 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x700 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_per: prm@800 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x800 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_wkup: prm@2000 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x2000 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_device: prm@4000 {
+		compatible = "ti,am4-prm-inst", "ti,omap-prm-inst";
+		reg = <0x4000 0x100>;
+		#reset-cells = <1>;
+	};
+};
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>,
+		 <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck", "ick";
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
 	};
 };
 
-/include/ "am43xx-clocks.dtsi"
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>,
+		 <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
+	clock-names = "fck", "ick";
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts
new file mode 100644
index 000000000000..0861e868b75a
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-cm-t43.dts
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am4372.dtsi"
+
+/ {
+	model = "CompuLab CM-T43";
+	compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	leds {
+		compatible = "gpio-leds";
+
+		ledb {
+			label = "cm-t43:green";
+			gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vmmc_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cm_t43_led_pins>;
+
+	cm_t43_led_pins: cm_t43_led_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa78, MUX_MODE7)
+		>;
+	};
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	emmc_pins: emmc_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad8.mmc1_dat0 */
+			AM4372_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad9.mmc1_dat1 */
+			AM4372_IOPAD(0x828, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad10.mmc1_dat2 */
+			AM4372_IOPAD(0x82c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad11.mmc1_dat3 */
+			AM4372_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad12.mmc1_dat4 */
+			AM4372_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad13.mmc1_dat5 */
+			AM4372_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad14.mmc1_dat6 */
+			AM4372_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_ad15.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	spi0_pins: pinmux_spi0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0) /* spi0_sclk.spi0_sclk */
+			AM4372_IOPAD(0x954, PIN_INPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */
+			AM4372_IOPAD(0x958, PIN_OUTPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */
+			AM4372_IOPAD(0x95C, PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x804, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x808, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x80c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x810, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x814, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x818, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x81c, PIN_INPUT | PULL_DISABLE | MUX_MODE0)
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP  | MUX_MODE0)
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x898, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x894, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x890, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+			AM4372_IOPAD(0x89c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0xa74, MUX_MODE3)
+			/* Slave 2 */
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a0.txen */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a1.rxctl */
+			AM4372_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a2.txd3 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a3.txd2 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a4.txd1 */
+			AM4372_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a5.txd0 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* gpmc_a6.tclk */
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a7.rclk */
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a8.rxd3 */
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a9.rxd2 */
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a10.rxd1 */
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN  | MUX_MODE2)	/* gpmc_a11.rxd0 */
+			AM4372_IOPAD(0xa38, MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0x08000000 0x1000000>;
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MTD partition table */
+		partition@0 {
+			label = "kernel";
+			reg = <0x0 0x00980000>;
+		};
+		partition@980000 {
+			label = "dtb";
+			reg = <0x00980000 0x00080000>;
+		};
+		partition@a00000 {
+			label = "rootfs";
+			reg = <0x00a00000 0x0>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		compatible = "ti,tps65218";
+		reg = <0x24>;
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
+		interrupt-parent = <&gic>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			regulator-name = "vdcdc3";
+			regulator-suspend-enable;
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc5: regulator-dcdc5 {
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		ldo1: regulator-ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	eeprom_module: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+};
+
+&mmc2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_pins>;
+	vmmc-supply = <&vmmc_3v3>;
+	bus-width = <8>;
+	non-removable;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	dmas = <&edma 16 0
+		&edma 17 0>;
+	dma-names = "tx0", "rx0";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x100000>;
+		};
+	};
+};
+
+&mac_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cpsw_default>;
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default";
+	pinctrl-0 = <&davinci_mdio_default>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&dwc3_1 {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&dwc3_2 {
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+	interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "peripheral", "host", "otg";
+};
+
+&elm {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+	tsc {
+		ti,wires = <4>;
+		ti,x-plate-resistance = <200>;
+		ti,coordinate-readouts = <5>;
+		ti,wire-config = <0x00 0x11 0x22 0x33>;
+	};
+
+	adc {
+		ti,adc-channels = <4 5 6 7>;
+	};
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+	operating-points = <1000000 1330000>,
+			   <800000 1260000>,
+			   <720000 1200000>,
+			   <600000 1100000>,
+			   <300000 950000>;
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index 84aa30c3235a..46d5361fe876 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /* AM437x GP EVM */
@@ -21,12 +18,15 @@
 
 	aliases {
 		display0 = &lcd0;
-		serial3 = &uart3;
 	};
 
-	vmmcsd_fixed: fixedregulator-sd {
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	evm_v3_3d: fixedregulator-v3_3d {
 		compatible = "regulator-fixed";
-		regulator-name = "vmmcsd_fixed";
+		regulator-name = "evm_v3_3d";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		enable-active-high;
@@ -52,19 +52,25 @@
 		enable-active-high;
 	};
 
-	backlight {
+	lcd_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
 
-		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&matrix_keypad_default>;
+		pinctrl-1 = <&matrix_keypad_sleep>;
+
+		wakeup-source;
+
+		row-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH /* Bank0, pin3 */
 				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
 				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
 
@@ -80,35 +86,10 @@
 		};
 
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
+		backlight = <&lcd_bl>;
 
 		port {
 			lcd_in: endpoint {
@@ -124,293 +105,523 @@
 		clock-frequency = <12000000>;
 	};
 
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-GP-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	beeper: beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&beeper_pins_default>;
+		pinctrl-1 = <&beeper_pins_sleep>;
+		gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &am43xx_pinmux {
 	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&wlan_pins_default>;
+	pinctrl-0 = <&wlan_pins_default &ddr3_vtt_toggle_default &unused_pins &debugss_pins>;
 	pinctrl-1 = <&wlan_pins_sleep>;
 
+	ddr3_vtt_toggle_default: ddr_vtt_toggle_default {
+		pinctrl-single,pins = <
+			0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) /* spi0_cs0.gpio5_7 */
+		>;
+	};
+
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+			AM4372_IOPAD(0x964, MUX_MODE0)       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 		>;
 	};
 
 	pixcir_ts_pins: pixcir_ts_pins {
 		pinctrl-single,pins = <
-			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+			AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	nand_flash_x8: nand_flash_x8 {
 		pinctrl-single,pins = <
-			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
-			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			AM4372_IOPAD(0x800, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			AM4372_IOPAD(0x804, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			AM4372_IOPAD(0x808, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			AM4372_IOPAD(0x810, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			AM4372_IOPAD(0x814, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			AM4372_IOPAD(0x818, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-
-		>;
-	};
-
-	lcd_pins: lcd_pins {
+			AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	display_mux_pins: display_mux_pins {
 		pinctrl-single,pins = <
 			/* GPIO 5_8 to select LCD / HDMI */
-			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+			AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
 		>;
 	};
 
 	dcan0_default: dcan0_default_pins {
 		pinctrl-single,pins = <
-			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
-			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+			AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+
+	dcan0_sleep: dcan0_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_ctsn.gpio0_12 */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rtsn.gpio0_13 */
 		>;
 	};
 
 	dcan1_default: dcan1_default_pins {
 		pinctrl-single,pins = <
-			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
-			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+			AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+		>;
+	};
+
+	dcan1_sleep: dcan1_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_rxd.gpio0_14 */
+			AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7)	/* uart1_txd.gpio0_15 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
-			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
-			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
-			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
-			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
-			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
-			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_default: vpfe1_pins_default {
 		pinctrl-single,pins = <
-			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
-			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
-			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
-			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
-			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
-			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
-			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
-			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
-			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
-			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
-			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
-			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
-			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	vpfe1_pins_sleep: vpfe1_pins_sleep {
 		pinctrl-single,pins = <
-			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
-			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
-			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
-			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
-			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
-			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
-			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
-			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
-			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
-			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
-			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
-			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
-			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+			AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
 		>;
 	};
 
 	mmc3_pins_default: pinmux_mmc3_pins_default {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
 		pinctrl-single,pins = <
-			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
-			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+			AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
 		>;
 	};
 
 	wlan_pins_default: pinmux_wlan_pins_default {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	wlan_pins_sleep: pinmux_wlan_pins_sleep {
 		pinctrl-single,pins = <
-			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
-			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
-			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+			AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
 		>;
 	};
 
 	uart3_pins: uart3_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
-			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
-			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
-			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+			AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+		>;
+	};
+
+	mcasp1_pins: mcasp1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_sleep_pins: mcasp1_sleep_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	gpio0_pins: gpio0_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
+		>;
+	};
+
+	emmc_pins_default: emmc_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+		>;
+	};
+
+	emmc_pins_sleep: emmc_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
+			AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
+			AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
+			AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
+			AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
+			AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
+			AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
+			AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
+			AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
+			AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
+		>;
+	};
+
+	beeper_pins_default: beeper_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_field.gpio4_12 */
+		>;
+	};
+
+	beeper_pins_sleep: beeper_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9e0, PIN_INPUT_PULLDOWN | MUX_MODE7)	/* cam1_field.gpio4_12 */
+		>;
+	};
+
+	unused_pins: unused_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x950, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x99c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa3c, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+			AM4372_IOPAD(0xa40, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa44, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa48, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa4c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa50, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa54, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+			AM4372_IOPAD(0xa58, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa60, PIN_INPUT | PULL_DISABLE | MUX_MODE7)
+			AM4372_IOPAD(0xa68, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa70, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa78, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xa7c, PIN_INPUT | PULL_DISABLE)
+			AM4372_IOPAD(0xac8, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xad4, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xad8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xadc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xae0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xae4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xae8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaec, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaf0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaf4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xaf8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xafc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb00, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb04, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb08, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb0c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb10, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb14, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0xb18, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	debugss_pins: pinmux_debugss_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa90, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa94, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa98, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xa9c, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa0, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa4, PIN_INPUT_PULLDOWN)
+			AM4372_IOPAD(0xaa8, PIN_INPUT_PULLDOWN)
+		>;
+	};
+
+	uart0_pins_default: uart0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	uart0_pins_sleep: uart0_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_ctsn.uart0_ctsn */
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* uart0_rtsn.uart0_rtsn */
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT_PULLDOWN | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	matrix_keypad_default: matrix_keypad_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)
+			AM4372_IOPAD(0x9a8, PIN_OUTPUT | MUX_MODE7)
+			AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+			AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	matrix_keypad_sleep: matrix_keypad_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9a4, PULL_UP | MUX_MODE7)
+			AM4372_IOPAD(0x9a8, PULL_UP | MUX_MODE7)
+			AM4372_IOPAD(0x9ac, PIN_INPUT | PULL_DISABLE | MUX_MODE9)
+			AM4372_IOPAD(0x954, PIN_INPUT_PULLDOWN | MUX_MODE0)
 		>;
 	};
 };
 
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart0_pins_default>;
+	pinctrl-1 = <&uart0_pins_sleep>;
+};
+
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -420,12 +631,11 @@
 	tps65218: tps65218@24 {
 		reg = <0x24>;
 		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -434,7 +644,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -443,29 +652,40 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
+
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
@@ -498,13 +718,20 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pixcir_ts_pins>;
 		reg = <0x5c>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
 
 		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 
+		/*
+		 * 0x264 represents the offset of padconf register of
+		 * gpio3_22 from am43xx_pinmux base.
+		 */
+		interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
+				      <&am43xx_pinmux 0x264>;
+		interrupt-names = "tsc", "wakeup";
+
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
+		wakeup-source;
 	};
 
 	ov2659@30 {
@@ -521,6 +748,19 @@
 			};
 		};
 	};
+
+	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x1b>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
+		AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
+		DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
+	};
 };
 
 &epwmss0 {
@@ -535,6 +775,14 @@
 	};
 };
 
+&magadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
 &ecap0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -542,7 +790,23 @@
 };
 
 &gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_pins>;
 	status = "okay";
+
+	sel-emmc-nand-hog {
+		gpio-hog;
+		gpios = <23 GPIO_ACTIVE_HIGH>;
+		/* SelEMMCorNAND selects between eMMC and NAND:
+		 * Low: NAND
+		 * High: eMMC
+		 * When changing this line make sure the newly
+		 * selected device node is enabled and the previously
+		 * selected device node is disabled.
+		 */
+		output-low;
+		line-name = "SelEMMCorNAND";
+	};
 };
 
 &gpio1 {
@@ -557,26 +821,58 @@
 	status = "okay";
 };
 
+&gpio5_target {
+	ti,no-reset-on-init;
+};
+
 &gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
-	ti,no-reset-on-init;
+
+	sel-lcd-hdmi-hog {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmcsd_fixed>;
+	vmmc-supply = <&evm_v3_3d>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+/* eMMC sits on mmc2 */
+&mmc2 {
+	/*
+	 * When enabling eMMC, disable GPMC/NAND and set
+	 * SelEMMCorNAND to output-high
+	 */
+	status = "disabled";
+	vmmc-supply = <&evm_v3_3d>;
+	bus-width = <8>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&emmc_pins_default>;
+	pinctrl-1 = <&emmc_pins_sleep>;
+	non-removable;
 };
 
 &mmc3 {
 	status = "okay";
 	/* these are on the crossbar and are outlined in the
 	   xbar-event-map element */
-	dmas = <&edma 30
-		&edma 31>;
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
 	dma-names = "tx", "rx";
 	vmmc-supply = <&vmmcwl_fixed>;
 	bus-width = <4>;
@@ -585,7 +881,7 @@
 	pinctrl-1 = <&mmc3_pins_sleep>;
 	cap-power-off-card;
 	keep-power-in-suspend;
-	ti,non-removable;
+	non-removable;
 
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -593,15 +889,10 @@
 		compatible = "ti,wl1835";
 		reg = <2>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <23 IRQ_TYPE_EDGE_RISING>;
 	};
 };
 
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 30
-					    2 31>;
-};
-
 &uart3 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -613,7 +904,7 @@
 };
 
 &usb1 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	status = "okay";
 };
 
@@ -626,24 +917,31 @@
 	status = "okay";
 };
 
-&mac {
-	slaves = <1>;
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
 &elm {
@@ -651,12 +949,22 @@
 };
 
 &gpmc {
+	/*
+	 * When enabling GPMC, disable eMMC and set
+	 * SelEMMCorNAND to output-low
+	 */
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -675,11 +983,9 @@
 		gpmc,access-ns = <30>;
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -732,13 +1038,13 @@
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_pins>;
 
 	port {
-		dpi_out: endpoint@0 {
+		dpi_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
@@ -746,14 +1052,16 @@
 };
 
 &dcan0 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan0_default>;
+	pinctrl-1 = <&dcan0_sleep>;
 	status = "okay";
 };
 
 &dcan1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&dcan1_default>;
+	pinctrl-1 = <&dcan1_sleep>;
 	status = "okay";
 };
 
@@ -790,3 +1098,40 @@
 		};
 	};
 };
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>; /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 1 2
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
+	status = "okay";
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
+
+&wkup_m3_ipc {
+	ti,set-io-isolation;
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts
index 378344271746..e46cf2a9d075 100644
--- a/arch/arm/boot/dts/am437x-idk-evm.dts
+++ b/arch/arm/boot/dts/am437x-idk-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /dts-v1/;
@@ -18,6 +15,10 @@
 	model = "TI AM437x Industrial Development Kit";
 	compatible = "ti,am437x-idk-evm","ti,am4372","ti,am43";
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	v24_0d: fixed-regulator-v24_0d {
 		compatible = "regulator-fixed";
 		regulator-name = "V24_0D";
@@ -97,155 +98,230 @@
 		vin-supply = <&v1_5dreg>;
 	};
 
-	gpio_keys: gpio_keys {
+	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_keys_pins_default>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		switch@0 {
+		switch-0 {
 			label = "power-button";
 			linux,code = <KEY_POWER>;
 			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &am43xx_pinmux {
 	gpio_keys_pins_default: gpio_keys_pins_default {
 		pinctrl-single,pins = <
-			0x1b8 (PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
+			AM4372_IOPAD(0x9b8, PIN_INPUT | MUX_MODE7)	/* cam0_field.gpio4_2 */
 		>;
 	};
 
 	i2c0_pins_default: i2c0_pins_default {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c0_pins_sleep: i2c0_pins_sleep {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x18c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x988, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x98c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	i2c2_pins_default: i2c2_pins_default {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
-			0x1ec (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
+			AM4372_IOPAD(0x9e8, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data1.i2c2_scl */
+			AM4372_IOPAD(0x9ec, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE3) /* cam1_data0.i2c2_sda */
 		>;
 	};
 
 	i2c2_pins_sleep: i2c2_pins_sleep {
 		pinctrl-single,pins = <
-			0x1e8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1ec (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9e8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9ec, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	mmc1_pins_default: pinmux_mmc1_pins_default {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x1f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x1f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x1f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x1fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x9f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x9f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x9f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
 		pinctrl-single,pins = <
-			0x100 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x104 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1f8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1fc (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x160 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x960, PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	spi1_pins_default: spi1_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT | MUX_MODE2)	/* mii1_col.spi1_sclk */
+			AM4372_IOPAD(0x910, PIN_INPUT | MUX_MODE2)	/* mii1_rx_er.spi1_d1 */
+			AM4372_IOPAD(0x944, PIN_OUTPUT | MUX_MODE2)	/* rmii1_ref_clk.spi1_cs0 */
+			AM4372_IOPAD(0x90c, PIN_OUTPUT | MUX_MODE7)	/* mii1_crs.gpio3_1 */
+		>;
+	};
+
+	spi1_pins_sleep: spi1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	ecap0_pins_default: backlight_pins_default {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* ecap0_in_pwm0_out.ecap0_in_pwm0_out */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
-			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rgmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	qspi_pins_default: qspi_pins_default {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT_PULLUP | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)		/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	qspi_pins_sleep: qspi_pins_sleep{
 		pinctrl-single,pins = <
-			0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x87c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x890, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x894, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x898, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x89c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 };
@@ -258,7 +334,7 @@
 	clock-frequency = <400000>;
 
 	at24@50 {
-		compatible = "at24,24c256";
+		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
@@ -283,6 +359,33 @@
 	pinctrl-0 = <&i2c2_pins_default>;
 	pinctrl-1 = <&i2c2_pins_sleep>;
 	clock-frequency = <100000>;
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		load-gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
 };
 
 &epwmss0 {
@@ -303,6 +406,10 @@
 	status = "okay";
 };
 
+&gpio3 {
+	status = "okay";
+};
+
 &gpio4 {
 	status = "okay";
 };
@@ -318,7 +425,7 @@
 	pinctrl-1 = <&mmc1_pins_sleep>;
 	vmmc-supply = <&v3_3d>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
 &qspi {
@@ -328,7 +435,7 @@
 	pinctrl-1 = <&qspi_pins_sleep>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -345,7 +452,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
@@ -374,26 +481,36 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
-	phy-mode = "rgmii";
+&cpsw_port2 {
+	status = "disabled";
 };
 
 &rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
 	status = "okay";
 };
 
@@ -404,3 +521,21 @@
 &cpu {
 	cpu0-supply = <&tps>;
 };
+
+&cpu0_opp_table {
+	/*
+	 * Supply voltage supervisor on board will not allow opp50 so
+	 * disable it and set opp100 as suspend OPP.
+	 */
+	opp50-300000000 {
+		status = "disabled";
+	};
+
+	opp100-600000000 {
+		opp-suspend;
+	};
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
new file mode 100644
index 000000000000..415210b034ef
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-l4.dtsi
@@ -0,0 +1,2584 @@
+&l4_wkup {						/* 0x44c00000 */
+	compatible = "ti,am4-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkup>;
+	clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x44c00000 0x800>,
+	      <0x44c00800 0x800>,
+	      <0x44c01000 0x400>,
+	      <0x44c01400 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x44c00000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x44d00000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x44e00000 0x100000>;	/* segment 2 */
+
+	segment@0 {					/* 0x44c00000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>;	/* ap 3 */
+	};
+
+	segment@100000 {					/* 0x44d00000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00100000 0x004000>,	/* ap 4 */
+			 <0x00004000 0x00104000 0x001000>,	/* ap 5 */
+			 <0x00080000 0x00180000 0x002000>,	/* ap 6 */
+			 <0x00082000 0x00182000 0x001000>,	/* ap 7 */
+			 <0x000f0000 0x001f0000 0x010000>;	/* ap 8 */
+
+		target-module@0 {			/* 0x44d00000, ap 4 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>;
+			reg-names = "rev";
+			clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00000000 0x4000>,
+				 <0x00080000 0x00080000 0x2000>;
+
+			wkup_m3: cpu@0 {
+				compatible = "ti,am4372-wkup-m3";
+				reg = <0x00000000 0x4000>,
+				      <0x00080000 0x2000>;
+				reg-names = "umem", "dmem";
+				resets = <&prm_wkup 3>;
+				reset-names = "rstctrl";
+				ti,pm-firmware = "am335x-pm-firmware.elf";
+			};
+		};
+
+		target-module@f0000 {			/* 0x44df0000, ap 8 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf0000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf0000 0x10000>;
+
+			prcm: prcm@0 {
+				compatible = "ti,am4-prcm", "simple-bus";
+				reg = <0x0 0x11000>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x11000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x44e00000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00200000 0x001000>,	/* ap 9 */
+			 <0x00003000 0x00203000 0x001000>,	/* ap 10 */
+			 <0x00004000 0x00204000 0x001000>,	/* ap 11 */
+			 <0x00005000 0x00205000 0x001000>,	/* ap 12 */
+			 <0x00006000 0x00206000 0x001000>,	/* ap 13 */
+			 <0x00007000 0x00207000 0x001000>,	/* ap 14 */
+			 <0x00008000 0x00208000 0x001000>,	/* ap 15 */
+			 <0x00009000 0x00209000 0x001000>,	/* ap 16 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 17 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 18 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 19 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 20 */
+			 <0x0000f000 0x0020f000 0x001000>,	/* ap 21 */
+			 <0x00010000 0x00210000 0x010000>,	/* ap 22 */
+			 <0x00030000 0x00230000 0x001000>,	/* ap 23 */
+			 <0x00031000 0x00231000 0x001000>,	/* ap 24 */
+			 <0x00032000 0x00232000 0x001000>,	/* ap 25 */
+			 <0x00033000 0x00233000 0x001000>,	/* ap 26 */
+			 <0x00034000 0x00234000 0x001000>,	/* ap 27 */
+			 <0x00035000 0x00235000 0x001000>,	/* ap 28 */
+			 <0x00036000 0x00236000 0x001000>,	/* ap 29 */
+			 <0x00037000 0x00237000 0x001000>,	/* ap 30 */
+			 <0x00038000 0x00238000 0x001000>,	/* ap 31 */
+			 <0x00039000 0x00239000 0x001000>,	/* ap 32 */
+			 <0x0003a000 0x0023a000 0x001000>,	/* ap 33 */
+			 <0x0003e000 0x0023e000 0x001000>,	/* ap 34 */
+			 <0x0003f000 0x0023f000 0x001000>,	/* ap 35 */
+			 <0x00040000 0x00240000 0x040000>,	/* ap 36 */
+			 <0x00080000 0x00280000 0x001000>,	/* ap 37 */
+			 <0x00088000 0x00288000 0x008000>,	/* ap 38 */
+			 <0x00092000 0x00292000 0x001000>,	/* ap 39 */
+			 <0x00086000 0x00286000 0x001000>,	/* ap 40 */
+			 <0x00087000 0x00287000 0x001000>,	/* ap 41 */
+			 <0x00090000 0x00290000 0x001000>,	/* ap 42 */
+			 <0x00091000 0x00291000 0x001000>;	/* ap 43 */
+
+		target-module@3000 {			/* 0x44e03000, ap 10 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+
+		target-module@5000 {			/* 0x44e05000, ap 12 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+		};
+
+		target-module@7000 {			/* 0x44e07000, ap 14 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7000 0x4>,
+			      <0x7010 0x4>,
+			      <0x7114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 0>,
+				 <&l4_wkup_clkctrl AM4_L4_WKUP_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7000 0x1000>;
+
+			gpio0: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@9000 {			/* 0x44e09000, ap 16 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9050 0x4>,
+			      <0x9054 0x4>,
+			      <0x9058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9000 0x1000>;
+
+			uart0: serial@0 {
+				compatible = "ti,am4372-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@b000 {			/* 0x44e0b000, ap 18 48.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb000 0x8>,
+			      <0xb010 0x8>,
+			      <0xb090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb000 0x1000>;
+
+			i2c0: i2c@0 {
+				compatible = "ti,am4372-i2c","ti,omap4-i2c";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d000 {			/* 0x44e0d000, ap 20 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd000 0x4>,
+			      <0xd010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkup_pwrdm, l3s_tsc_clkdm */
+			clocks = <&l3s_tsc_clkctrl AM4_L3S_TSC_ADC_TSC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd000 0x1000>;
+
+			tscadc: tscadc@0 {
+				compatible = "ti,am3359-tscadc";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&adc_tsc_fck>;
+				clock-names = "fck";
+				status = "disabled";
+				dmas = <&edma 53 0>, <&edma 57 0>;
+				dma-names = "fifo0", "fifo1";
+
+				tsc {
+					compatible = "ti,am3359-tsc";
+				};
+
+				adc {
+					#io-channel-cells = <1>;
+					compatible = "ti,am3359-adc";
+				};
+
+			};
+		};
+
+		target-module@10000 {			/* 0x44e10000, ap 22 0c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x10000 0x4>;
+			reg-names = "rev";
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_CONTROL_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x10000>;
+
+			scm: scm@0 {
+				compatible = "ti,am4-scm", "simple-bus";
+				reg = <0x0 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x4000>;
+
+				am43xx_pinmux: pinmux@800 {
+					compatible = "ti,am437-padconf",
+						     "pinctrl-single";
+					reg = <0x800 0x31c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0xffffffff>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,am43xx-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <2>;
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				wkup_m3_ipc: wkup_m3_ipc@1324 {
+					compatible = "ti,am4372-wkup-m3-ipc";
+					reg = <0x1324 0x44>;
+					interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+					ti,rproc = <&wkup_m3>;
+					mboxes = <&mailbox &mbox_wkupm3>;
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <64>;
+					dma-masters = <&edma>;
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		timer1_target: target-module@31000 {	/* 0x44e31000, ap 24 40.0 */
+			compatible = "ti,sysc-omap2-timer", "ti,sysc";
+			reg = <0x31000 0x4>,
+			      <0x31010 0x4>,
+			      <0x31014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x31000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+				clocks = <&timer1_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@33000 {			/* 0x44e33000, ap 26 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x33000 0x1000>;
+		};
+
+		target-module@35000 {			/* 0x44e35000, ap 28 50.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x35000 0x4>,
+			      <0x35010 0x4>,
+			      <0x35014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
+			clocks = <&l4_wkup_clkctrl AM4_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x35000 0x1000>;
+
+			wdt: wdt@0 {
+				compatible = "ti,am4372-wdt","ti,omap3-wdt";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@37000 {			/* 0x44e37000, ap 30 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x37000 0x1000>;
+		};
+
+		target-module@39000 {			/* 0x44e39000, ap 32 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x39000 0x1000>;
+		};
+
+		rtc_target: target-module@3e000 {	/* 0x44e3e000, ap 34 60.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3e074 0x4>,
+			      <0x3e078 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
+			power-domains = <&prm_rtc>;
+			clocks = <&l4_rtc_clkctrl AM4_L4_RTC_RTC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			rtc: rtc@0 {
+				compatible = "ti,am4372-rtc", "ti,am3352-rtc",
+					     "ti,da830-rtc";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_32768_ck>;
+				clock-names = "int-clk";
+				system-power-controller;
+				status = "disabled";
+			};
+		};
+
+		target-module@40000 {			/* 0x44e40000, ap 36 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x40000>;
+		};
+
+		target-module@86000 {			/* 0x44e86000, ap 40 70.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): wkup_pwrdm, l4_wkup_aon_clkdm */
+			clocks = <&l4_wkup_aon_clkctrl AM4_L4_WKUP_AON_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+				reg = <0x0 0x40>;
+			};
+		};
+
+		target-module@88000 {			/* 0x44e88000, ap 38 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00088000 0x00008000>,
+				 <0x00008000 0x00090000 0x00001000>,
+				 <0x00009000 0x00091000 0x00001000>;
+		};
+	};
+};
+
+&l4_fast {					/* 0x4a000000 */
+	compatible = "ti,am4-l4-fast", "simple-pm-bus";
+	power-domains = <&prm_per>;
+	clocks = <&l3_clkctrl AM4_L3_L4_HS_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x400>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x1000000>;	/* segment 0 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00100000 0x00100000 0x008000>,	/* ap 3 */
+			 <0x00108000 0x00108000 0x001000>,	/* ap 4 */
+			 <0x00400000 0x00400000 0x002000>,	/* ap 5 */
+			 <0x00402000 0x00402000 0x001000>,	/* ap 6 */
+			 <0x00200000 0x00200000 0x080000>,	/* ap 7 */
+			 <0x00280000 0x00280000 0x001000>;	/* ap 8 */
+
+		target-module@100000 {			/* 0x4a100000, ap 3 04.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x101200 0x4>,
+			      <0x101208 0x4>,
+			      <0x101204 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <0>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&cpsw_125mhz_clkctrl AM4_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x8000>;
+
+			mac_sw: switch@0 {
+				compatible = "ti,am4372-cpsw-switch", "ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&cpsw_125mhz_gclk>, <&dpll_clksel_mac_clk>;
+				clock-names = "fck", "50mclk";
+				assigned-clocks = <&dpll_clksel_mac_clk>;
+				assigned-clock-rates = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+					      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+				ethernet-ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						label = "port1";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1 0>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						label = "port2";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2 0>;
+					};
+				};
+
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,am4372-mdio", "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&cpsw_125mhz_gclk>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+				};
+
+				cpts {
+					clocks = <&cpsw_cpts_rft_clk>;
+					clock-names = "cpts";
+				};
+			};
+		};
+
+		target-module@200000 {			/* 0x4a200000, ap 7 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x200000 0x80000>;
+		};
+
+		target-module@400000 {			/* 0x4a400000, ap 5 08.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x400000 0x2000>;
+		};
+	};
+};
+
+&l4_per {					/* 0x48000000 */
+	compatible = "ti,am4-l4-per", "simple-pm-bus";
+	power-domains = <&prm_per>;
+	clocks = <&l4ls_clkctrl AM4_L4LS_L4_LS_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x48100000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x48200000 0x100000>,	/* segment 2 */
+		 <0x00300000 0x48300000 0x100000>,	/* segment 3 */
+		 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+		 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 5 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 6 */
+			 <0x00009000 0x00009000 0x001000>,	/* ap 7 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 8 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 9 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 10 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 11 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 12 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 13 */
+			 <0x00038000 0x00038000 0x002000>,	/* ap 14 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 15 */
+			 <0x0003c000 0x0003c000 0x002000>,	/* ap 16 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 17 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 18 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 19 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 20 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 21 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 22 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 23 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 24 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 25 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 26 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 27 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 28 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 29 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 30 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 31 */
+			 <0x00080000 0x00080000 0x010000>,	/* ap 32 */
+			 <0x00090000 0x00090000 0x001000>,	/* ap 33 */
+			 <0x00030000 0x00030000 0x001000>,	/* ap 65 */
+			 <0x00031000 0x00031000 0x001000>,	/* ap 66 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 71 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 72 */
+			 <0x000c8000 0x000c8000 0x001000>,	/* ap 73 */
+			 <0x000c9000 0x000c9000 0x001000>,	/* ap 74 */
+			 <0x000ca000 0x000ca000 0x001000>,	/* ap 77 */
+			 <0x000cb000 0x000cb000 0x001000>,	/* ap 78 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 80 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 81 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 84 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 85 */
+			 <0x46000000 0x46000000 0x400000>,	/* l3 data port */
+			 <0x46400000 0x46400000 0x400000>;	/* l3 data port */
+
+		target-module@8000 {			/* 0x48008000, ap 6 10.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@22000 {			/* 0x48022000, ap 8 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22050 0x4>,
+			      <0x22054 0x4>,
+			      <0x22058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,am4372-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x48024000, ap 10 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x24050 0x4>,
+			      <0x24054 0x4>,
+			      <0x24058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,am4372-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@2a000 {			/* 0x4802a000, ap 12 22.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2a000 0x8>,
+			      <0x2a010 0x8>,
+			      <0x2a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,am4372-i2c","ti,omap4-i2c";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@30000 {			/* 0x48030000, ap 65 08.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x30000 0x4>,
+			      <0x30110 0x4>,
+			      <0x30114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+
+			spi0: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@34000 {			/* 0x48034000, ap 80 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+		};
+
+		target-module@36000 {			/* 0x48036000, ap 84 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		target-module@38000 {			/* 0x48038000, ap 14 04.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x38000 0x4>,
+			      <0x38004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_MCASP0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x2000>,
+				 <0x46000000 0x46000000 0x400000>;
+
+			mcasp0: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46000000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 8 2>,
+				       <&edma 9 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@3c000 {			/* 0x4803c000, ap 16 2a.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_MCASP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x2000>,
+				 <0x46400000 0x46400000 0x400000>;
+
+			mcasp1: mcasp@0 {
+				compatible = "ti,am33xx-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46400000 0x400000>;
+				reg-names = "mpu", "dat";
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				status = "disabled";
+				dmas = <&edma 10 2>,
+				       <&edma 11 2>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		timer2_target: target-module@40000 {	/* 0x48040000, ap 18 1e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40010 0x4>,
+			      <0x40014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			timer2: timer@0  {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&timer2_fck>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@42000 {			/* 0x48042000, ap 20 24.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42010 0x4>,
+			      <0x42014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@44000 {			/* 0x48044000, ap 22 26.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x44000 0x4>,
+			      <0x44010 0x4>,
+			      <0x44014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@46000 {			/* 0x48046000, ap 24 28.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x46000 0x4>,
+			      <0x46010 0x4>,
+			      <0x46014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@48000 {			/* 0x48048000, ap 26 1a.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x48000 0x4>,
+			      <0x48010 0x4>,
+			      <0x48014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@4a000 {			/* 0x4804a000, ap 71 48.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x4a000 0x4>,
+			      <0x4a010 0x4>,
+			      <0x4a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+				status = "disabled";
+			};
+		};
+
+		target-module@4c000 {			/* 0x4804c000, ap 28 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>,
+			      <0x4c114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 30 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x602fc 0x4>,
+			      <0x60110 0x4>,
+			      <0x60114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,am437-sdhci";
+				reg = <0x0 0x1000>;
+				ti,needs-special-reset;
+				dmas = <&edma 24 0>,
+					<&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48080000, ap 32 18.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>,
+			      <0x80014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x10000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&l4ls_gclk>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		target-module@c8000 {			/* 0x480c8000, ap 73 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc8000 0x4>,
+			      <0xc8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_MAILBOX_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc8000 0x1000>;
+
+			mailbox: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <8>;
+				mbox_wkupm3: mbox-wkup-m3 {
+					ti,mbox-send-noirq;
+					ti,mbox-tx = <0 0 0>;
+					ti,mbox-rx = <0 0 3>;
+				};
+			};
+		};
+
+		target-module@ca000 {			/* 0x480ca000, ap 77 38.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xca000 0x4>,
+			      <0xca010 0x4>,
+			      <0xca014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xca000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x48100000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0008c000 0x0018c000 0x001000>,	/* ap 34 */
+			 <0x0008d000 0x0018d000 0x001000>,	/* ap 35 */
+			 <0x0008e000 0x0018e000 0x001000>,	/* ap 36 */
+			 <0x0008f000 0x0018f000 0x001000>,	/* ap 37 */
+			 <0x0009c000 0x0019c000 0x001000>,	/* ap 38 */
+			 <0x0009d000 0x0019d000 0x001000>,	/* ap 39 */
+			 <0x000a6000 0x001a6000 0x001000>,	/* ap 40 */
+			 <0x000a7000 0x001a7000 0x001000>,	/* ap 41 */
+			 <0x000a8000 0x001a8000 0x001000>,	/* ap 42 */
+			 <0x000a9000 0x001a9000 0x001000>,	/* ap 43 */
+			 <0x000aa000 0x001aa000 0x001000>,	/* ap 44 */
+			 <0x000ab000 0x001ab000 0x001000>,	/* ap 45 */
+			 <0x000ac000 0x001ac000 0x001000>,	/* ap 46 */
+			 <0x000ad000 0x001ad000 0x001000>,	/* ap 47 */
+			 <0x000ae000 0x001ae000 0x001000>,	/* ap 48 */
+			 <0x000af000 0x001af000 0x001000>,	/* ap 49 */
+			 <0x000cc000 0x001cc000 0x002000>,	/* ap 50 */
+			 <0x000ce000 0x001ce000 0x002000>,	/* ap 51 */
+			 <0x000d0000 0x001d0000 0x002000>,	/* ap 52 */
+			 <0x000d2000 0x001d2000 0x002000>,	/* ap 53 */
+			 <0x000d8000 0x001d8000 0x001000>,	/* ap 54 */
+			 <0x000d9000 0x001d9000 0x001000>,	/* ap 55 */
+			 <0x000a0000 0x001a0000 0x001000>,	/* ap 67 */
+			 <0x000a1000 0x001a1000 0x001000>,	/* ap 68 */
+			 <0x000a2000 0x001a2000 0x001000>,	/* ap 69 */
+			 <0x000a3000 0x001a3000 0x001000>,	/* ap 70 */
+			 <0x000a4000 0x001a4000 0x001000>,	/* ap 92 */
+			 <0x000a5000 0x001a5000 0x001000>,	/* ap 93 */
+			 <0x000c1000 0x001c1000 0x001000>,	/* ap 94 */
+			 <0x000c2000 0x001c2000 0x001000>;	/* ap 95 */
+
+		target-module@8c000 {			/* 0x4818c000, ap 34 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8c000 0x1000>;
+		};
+
+		target-module@8e000 {			/* 0x4818e000, ap 36 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8e000 0x1000>;
+		};
+
+		target-module@9c000 {			/* 0x4819c000, ap 38 52.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x9c000 0x8>,
+			      <0x9c010 0x8>,
+			      <0x9c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,am4372-i2c","ti,omap4-i2c";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a0000 {			/* 0x481a0000, ap 67 2c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa0000 0x4>,
+			      <0xa0110 0x4>,
+			      <0xa0114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x1000>;
+
+			spi1: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a2000 {			/* 0x481a2000, ap 69 2e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa2000 0x4>,
+			      <0xa2110 0x4>,
+			      <0xa2114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+
+			spi2: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a4000 {			/* 0x481a4000, ap 92 62.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa4000 0x4>,
+			      <0xa4110 0x4>,
+			      <0xa4114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa4000 0x1000>;
+
+			spi3: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a6000 {			/* 0x481a6000, ap 40 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa6050 0x4>,
+			      <0xa6054 0x4>,
+			      <0xa6058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa6000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,am4372-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@a8000 {			/* 0x481a8000, ap 42 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa8050 0x4>,
+			      <0xa8054 0x4>,
+			      <0xa8058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,am4372-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@aa000 {			/* 0x481aa000, ap 44 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xaa050 0x4>,
+			      <0xaa054 0x4>,
+			      <0xaa058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xaa000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,am4372-uart";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@ac000 {			/* 0x481ac000, ap 46 30.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xac000 0x4>,
+			      <0xac010 0x4>,
+			      <0xac114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xac000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@ae000 {			/* 0x481ae000, ap 48 32.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xae000 0x4>,
+			      <0xae010 0x4>,
+			      <0xae114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xae000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@c1000 {			/* 0x481c1000, ap 94 68.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0xc1000 0x4>,
+			      <0xc1010 0x4>,
+			      <0xc1014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc1000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@cc000 {			/* 0x481cc000, ap 50 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xcc020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN0_CLKCTRL 0>,
+			<&dcan0_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xcc000 0x2000>;
+
+			dcan0: can@0 {
+				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan0_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 0>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d0000 {			/* 0x481d0000, ap 52 3a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd0020 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_D_CAN1_CLKCTRL 0>,
+			<&dcan1_fck>;
+			clock-names = "fck", "osc";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd0000 0x2000>;
+
+			dcan1: can@0 {
+				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+				reg = <0x0 0x2000>;
+				clocks = <&dcan1_fck>;
+				clock-names = "fck";
+				syscon-raminit = <&scm_conf 0x644 1>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@d8000 {			/* 0x481d8000, ap 54 5e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xd82fc 0x4>,
+			      <0xd8110 0x4>,
+			      <0xd8114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd8000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,am437-sdhci";
+				reg = <0x0 0x1000>;
+				ti,needs-special-reset;
+				dmas = <&edma 2 0>,
+					<&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00200000 0x010000>;
+
+		target-module@0 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpu_clkctrl AM4_MPU_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			ti,no-idle;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0x10000>;
+
+			mpu@0 {
+				compatible = "ti,omap4-mpu";
+				pm-sram = <&pm_sram_code
+					   &pm_sram_data>;
+			};
+		};
+	};
+
+	segment@300000 {					/* 0x48300000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00300000 0x001000>,	/* ap 56 */
+			 <0x00001000 0x00301000 0x001000>,	/* ap 57 */
+			 <0x00002000 0x00302000 0x001000>,	/* ap 58 */
+			 <0x00003000 0x00303000 0x001000>,	/* ap 59 */
+			 <0x00004000 0x00304000 0x001000>,	/* ap 60 */
+			 <0x00005000 0x00305000 0x001000>,	/* ap 61 */
+			 <0x00018000 0x00318000 0x004000>,	/* ap 62 */
+			 <0x0001c000 0x0031c000 0x001000>,	/* ap 63 */
+			 <0x00010000 0x00310000 0x002000>,	/* ap 64 */
+			 <0x00028000 0x00328000 0x001000>,	/* ap 75 */
+			 <0x00029000 0x00329000 0x001000>,	/* ap 76 */
+			 <0x00012000 0x00312000 0x001000>,	/* ap 79 */
+			 <0x00020000 0x00320000 0x001000>,	/* ap 82 */
+			 <0x00021000 0x00321000 0x001000>,	/* ap 83 */
+			 <0x00026000 0x00326000 0x001000>,	/* ap 86 */
+			 <0x00027000 0x00327000 0x001000>,	/* ap 87 */
+			 <0x0002a000 0x0032a000 0x000400>,	/* ap 88 */
+			 <0x0002c000 0x0032c000 0x001000>,	/* ap 89 */
+			 <0x00013000 0x00313000 0x001000>,	/* ap 90 */
+			 <0x00014000 0x00314000 0x001000>,	/* ap 91 */
+			 <0x00006000 0x00306000 0x001000>,	/* ap 96 */
+			 <0x00007000 0x00307000 0x001000>,	/* ap 97 */
+			 <0x00008000 0x00308000 0x001000>,	/* ap 98 */
+			 <0x00009000 0x00309000 0x001000>,	/* ap 99 */
+			 <0x0000a000 0x0030a000 0x001000>,	/* ap 100 */
+			 <0x0000b000 0x0030b000 0x001000>,	/* ap 101 */
+			 <0x0003d000 0x0033d000 0x001000>,	/* ap 102 */
+			 <0x0003e000 0x0033e000 0x001000>,	/* ap 103 */
+			 <0x0003f000 0x0033f000 0x001000>,	/* ap 104 */
+			 <0x00040000 0x00340000 0x001000>,	/* ap 105 */
+			 <0x00041000 0x00341000 0x001000>,	/* ap 106 */
+			 <0x00042000 0x00342000 0x001000>,	/* ap 107 */
+			 <0x00045000 0x00345000 0x001000>,	/* ap 108 */
+			 <0x00046000 0x00346000 0x001000>,	/* ap 109 */
+			 <0x00047000 0x00347000 0x001000>,	/* ap 110 */
+			 <0x00048000 0x00348000 0x001000>,	/* ap 111 */
+			 <0x000f2000 0x003f2000 0x002000>,	/* ap 112 */
+			 <0x000f4000 0x003f4000 0x001000>,	/* ap 113 */
+			 <0x0004c000 0x0034c000 0x002000>,	/* ap 114 */
+			 <0x0004e000 0x0034e000 0x001000>,	/* ap 115 */
+			 <0x00022000 0x00322000 0x001000>,	/* ap 116 */
+			 <0x00023000 0x00323000 0x001000>,	/* ap 117 */
+			 <0x000f0000 0x003f0000 0x001000>,	/* ap 118 */
+			 <0x0002a400 0x0032a400 0x000400>,	/* ap 119 */
+			 <0x0002a800 0x0032a800 0x000400>,	/* ap 120 */
+			 <0x0002ac00 0x0032ac00 0x000400>,	/* ap 121 */
+			 <0x0002b000 0x0032b000 0x001000>,	/* ap 122 */
+			 <0x00080000 0x00380000 0x020000>,	/* ap 123 */
+			 <0x000a0000 0x003a0000 0x001000>,	/* ap 124 */
+			 <0x000a8000 0x003a8000 0x008000>,	/* ap 125 */
+			 <0x000b0000 0x003b0000 0x001000>,	/* ap 126 */
+			 <0x000c0000 0x003c0000 0x020000>,	/* ap 127 */
+			 <0x000e0000 0x003e0000 0x001000>,	/* ap 128 */
+			 <0x000e8000 0x003e8000 0x008000>;	/* ap 129 */
+
+		target-module@0 {			/* 0x48300000, ap 56 40.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			epwmss0: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ecap0: pwm@100 {
+					compatible = "ti,am4372-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm0: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@2000 {			/* 0x48302000, ap 58 4a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>,
+			      <0x2004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			epwmss1: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ecap1: pwm@100 {
+					compatible = "ti,am4372-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm1: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@4000 {			/* 0x48304000, ap 60 44.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			epwmss2: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ecap2: pwm@100 {
+					compatible = "ti,am4372-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4ls_gclk>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm2: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@6000 {			/* 0x48306000, ap 96 58.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>,
+			      <0x6004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x1000>;
+
+			epwmss3: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ehrpwm3: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm3_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x48308000, ap 98 54.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>,
+			      <0x8004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			epwmss4: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ehrpwm4: pwm@48308200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm4_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@a000 {			/* 0x4830a000, ap 100 60.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa000 0x4>,
+			      <0xa004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_EPWMSS5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+
+			epwmss5: epwmss@0 {
+				compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+				reg = <0x0 0x10>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x1000>;
+				status = "disabled";
+
+				ehrpwm5: pwm@200 {
+					compatible = "ti,am4372-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm5_tbclk>, <&l4ls_gclk>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@10000 {			/* 0x48310000, ap 64 4e.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x11fe0 0x4>,
+			      <0x11fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@13000 {			/* 0x48313000, ap 90 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x13000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x48318000, ap 62 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x4000>;
+		};
+
+		target-module@20000 {			/* 0x48320000, ap 82 34.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20000 0x4>,
+			      <0x20010 0x4>,
+			      <0x20114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio5_target: target-module@22000 {		/* 0x48322000, ap 116 64.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22000 0x4>,
+			      <0x22010 0x4>,
+			      <0x22114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 0>,
+				 <&l4ls_clkctrl AM4_L4LS_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,am4372-gpio","ti,omap4-gpio";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				status = "disabled";
+			};
+		};
+
+		target-module@26000 {			/* 0x48326000, ap 86 66.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x26000 0x4>,
+			      <0x26104 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_VPFE0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+
+			vpfe0: vpfe@0 {
+				compatible = "ti,am437x-vpfe";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@28000 {			/* 0x48328000, ap 75 0e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x28000 0x4>,
+			      <0x28104 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_VPFE1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+
+			vpfe1: vpfe@0 {
+				compatible = "ti,am437x-vpfe";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@2a000 {			/* 0x4832a000, ap 88 3c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x2a000 0x4>,
+			      <0x2a010 0x4>,
+			      <0x2a014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, dss_clkdm */
+			clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x0002a000 0x00000400>,
+				 <0x00000400 0x0002a400 0x00000400>,
+				 <0x00000800 0x0002a800 0x00000400>,
+				 <0x00000c00 0x0002ac00 0x00000400>,
+				 <0x00001000 0x0002b000 0x00001000>;
+
+			dss: dss@0 {
+				compatible = "ti,omap3-dss";
+				reg = <0 0x200>;
+				status = "disabled";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x00000000 0x00000000 0x00000400>,
+					 <0x00000400 0x00000400 0x00000400>,
+					 <0x00000800 0x00000800 0x00000400>,
+					 <0x00000c00 0x00000c00 0x00000400>,
+					 <0x00001000 0x00001000 0x00001000>;
+
+				target-module@400 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x400 0x4>,
+					      <0x410 0x4>,
+					      <0x414 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x400 0x400>;
+
+					dispc: dispc@0 {
+						compatible = "ti,omap3-dispc";
+						reg = <0 0x400>;
+						interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&disp_clk>;
+						clock-names = "fck";
+
+						max-memory-bandwidth = <230000000>;
+					};
+				};
+
+				target-module@800 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x800 0x4>,
+					      <0x810 0x4>,
+					      <0x814 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x800 0x400>;
+
+					rfbi: rfbi@0 {
+						compatible = "ti,omap3-rfbi";
+						reg = <0 0x100>;
+						clocks = <&dss_clkctrl AM4_DSS_DSS_CORE_CLKCTRL 0>;
+						clock-names = "fck";
+						status = "disabled";
+					};
+				};
+			};
+		};
+
+		target-module@3d000 {			/* 0x4833d000, ap 102 6e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3d000 0x4>,
+			      <0x3d010 0x4>,
+			      <0x3d014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3d000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@3f000 {			/* 0x4833f000, ap 104 5c.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3f000 0x4>,
+			      <0x3f010 0x4>,
+			      <0x3f014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3f000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@41000 {			/* 0x48341000, ap 106 76.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x41000 0x4>,
+			      <0x41010 0x4>,
+			      <0x41014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x41000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,am4372-timer","ti,am335x-timer";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@45000 {			/* 0x48345000, ap 108 6a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x45000 0x4>,
+			      <0x45110 0x4>,
+			      <0x45114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_SPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x45000 0x1000>;
+
+			spi4: spi@0 {
+				compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@47000 {			/* 0x48347000, ap 110 70.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x47000 0x4>,
+			      <0x47014 0x4>,
+			      <0x47018 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_HDQ1W_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x47000 0x1000>;
+
+			hdq: hdq@0 {
+				compatible = "ti,am4372-hdq";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&func_12m_clk>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		target-module@4c000 {			/* 0x4834c000, ap 114 72.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4c000 0x4>,
+			      <0x4c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3s_clkctrl AM4_L3S_ADC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x2000>;
+
+			magadc: magadc@0 {
+				compatible = "ti,am4372-magadc";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&adc_mag_fck>;
+				clock-names = "fck";
+				dmas = <&edma 54 0>, <&edma 55 0>;
+				dma-names = "fifo0", "fifo1";
+				status = "disabled";
+
+				mag {
+					compatible = "ti,am4372-mag";
+				};
+
+				adc {
+					#io-channel-cells = <1>;
+					compatible = "ti,am4372-adc";
+				};
+			};
+		};
+
+		target-module@80000 {			/* 0x48380000, ap 123 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x20000>;
+
+			dwc3_1: omap_dwc3@0 {
+				compatible = "ti,am437x-dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <1>;
+				ranges = <0 0 0x20000>;
+
+				usb1: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x10000>;
+					interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy1>;
+					phy-names = "usb2-phy";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					status = "disabled";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@a8000 {			/* 0x483a8000, ap 125 6c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xa8000 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x8000>;
+
+			ocp2scp0: ocp2scp@0 {
+				compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+
+				usb2_phy1: phy@8000 {
+					compatible = "ti,am437x-usb2";
+					reg = <0x0 0x8000>;
+					syscon-phy-power = <&scm_conf 0x620>;
+					clocks = <&usb_phy0_always_on_clk32k>,
+						 <&l3s_clkctrl AM4_L3S_USB_OTG_SS0_CLKCTRL 8>;
+					clock-names = "wkupclk", "refclk";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@c0000 {			/* 0x483c0000, ap 127 7a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc0000 0x4>,
+			      <0xc0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): per_pwrdm, l3s_clkdm */
+			clocks = <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x20000>;
+
+			dwc3_2: omap_dwc3@0 {
+				compatible = "ti,am437x-dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <1>;
+				ranges = <0 0 0x20000>;
+
+				usb2: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x10000>;
+					interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy2>;
+					phy-names = "usb2-phy";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					status = "disabled";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@e8000 {			/* 0x483e8000, ap 129 78.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xe8000 0x4>;
+			reg-names = "rev";
+			/* Domains (P, C): per_pwrdm, l4ls_clkdm */
+			clocks = <&l4ls_clkctrl AM4_L4LS_OCP2SCP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe8000 0x8000>;
+
+			ocp2scp1: ocp2scp@0 {
+				compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+
+				usb2_phy2: phy@8000 {
+					compatible = "ti,am437x-usb2";
+					reg = <0x0 0x8000>;
+					syscon-phy-power = <&scm_conf 0x628>;
+					clocks = <&usb_phy1_always_on_clk32k>,
+						 <&l3s_clkctrl AM4_L3S_USB_OTG_SS1_CLKCTRL 8>;
+					clock-names = "wkupclk", "refclk";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@f2000 {			/* 0x483f2000, ap 112 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf2000 0x2000>;
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts
new file mode 100644
index 000000000000..8ea3780f939d
--- /dev/null
+++ b/arch/arm/boot/dts/am437x-sbc-t43.dts
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+#include "am437x-cm-t43.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CM-T43 on SB-SOM-T43";
+	compatible = "compulab,am437x-sbc-t43", "compulab,am437x-cm-t43", "ti,am4372", "ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+	};
+};
+
+&am43xx_pinmux {
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x964, PIN_INPUT | MUX_MODE7) /* ecap0_in_pwm0_out.gpio0_7 */
+		>;
+	};
+
+	dss_pinctrl_default: dss_pinctrl_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9b0, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam0 hd -> DSS DATA 23 */
+			AM4372_IOPAD(0x9b4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9b8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9bc, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c0, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c4, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9c8, PIN_OUTPUT_PULLUP | MUX_MODE2)
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE2) /* cam1 data 9 -> DSS DATA 16 */
+
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			AM4372_IOPAD(0xa20, PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	uart0_pins_default: uart0_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0)
+			AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+			AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_cs0.i2c1_sda  */
+			AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1)  /* spi2_sclk.i2c1_scl */
+		>;
+	};
+
+	i2c2_pins: i2c2_pins {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_ctsn.i2c2_sda  */
+			AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3)  /* uart1_rtsn.i2c2_scl */
+		>;
+	};
+
+	usb2_phy1_default: usb2_phy1_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+
+	usb2_phy2_default: usb2_phy2_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE0)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	eeprom_base: at24@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+};
+
+&mmc1 {
+	status = "okay";
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	vmmc-supply = <&vsb_3v3>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+};
+
+&dss {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pinctrl_default>;
+
+	port {
+		dpi_lcd_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_default>;
+};
+
+&dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy1_default>;
+};
+
+&dwc3_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb2_phy2_default>;
+};
+
+&lcd0 {
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 28 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index c17097d2c167..511a02e13e2c 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /* AM437x SK EVM */
@@ -15,6 +12,7 @@
 #include <dt-bindings/pwm/pwm.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "TI AM437x SK EVM";
@@ -24,7 +22,18 @@
 		display0 = &lcd0;
 	};
 
-	backlight {
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	/* fixed 32k external oscillator clock */
+	clk_32k_rtc: clk_32k_rtc {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	lcd_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
@@ -32,17 +41,32 @@
 	};
 
 	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM437x-SK-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT";
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM437x-SK-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+		};
+
+		sound_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24000000>;
+		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 
 		pinctrl-names = "default";
@@ -71,28 +95,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&leds_pins>;
 
-		led@0 {
+		led0 {
 			label = "am437x-sk:red:heartbeat";
 			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 0 */
 			linux,default-trigger = "heartbeat";
 			default-state = "off";
 		};
 
-		led@1 {
+		led1 {
 			label = "am437x-sk:green:mmc1";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 1 */
 			linux,default-trigger = "mmc0";
 			default-state = "off";
 		};
 
-		led@2 {
+		led2 {
 			label = "am437x-sk:blue:cpu0";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 2 */
 			linux,default-trigger = "cpu0";
 			default-state = "off";
 		};
 
-		led@3 {
+		led3 {
 			label = "am437x-sk:blue:usr3";
 			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;	/* Bank 5, pin 3 */
 			default-state = "off";
@@ -106,23 +130,9 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_pins>;
 
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		backlight = <&lcd_bl>;
 
-		panel-timing {
-			clock-frequency = <9000000>;
-			hactive = <480>;
-			vactive = <272>;
-			hfront-porch = <2>;
-			hback-porch = <2>;
-			hsync-len = <41>;
-			vfront-porch = <2>;
-			vback-porch = <2>;
-			vsync-len = <10>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
+		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 
 		port {
 			lcd_in: endpoint {
@@ -130,255 +140,342 @@
 			};
 		};
 	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		/*
+		 * WL_EN is not SDIO standard compliant. It is an out of band
+		 * signal and hard to be dealt with in a standard way by the
+		 * SDIO core driver.
+		 * So modelling the WL_EN line as a regulator was a natural
+		 * choice as the MMC core already deals with MMC supplies.
+		 */
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &am43xx_pinmux {
 	matrix_keypad_pins: matrix_keypad_pins {
 		pinctrl-single,pins = <
-			0x24c (PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
-			0x250 (PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
-			0x254 (PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
-			0x258 (PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
+			AM4372_IOPAD(0xa4c, PIN_OUTPUT | MUX_MODE7)	/* gpio5_13.gpio5_13 */
+			AM4372_IOPAD(0xa50, PIN_OUTPUT | MUX_MODE7)	/* spi4_sclk.gpio5_4 */
+			AM4372_IOPAD(0xa54, PIN_INPUT | MUX_MODE7)	/* spi4_d0.gpio5_5 */
+			AM4372_IOPAD(0xa58, PIN_INPUT | MUX_MODE7)	/* spi4_d1.gpio5_5 */
 		>;
 	};
 
 	leds_pins: leds_pins {
 		pinctrl-single,pins = <
-			0x228 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
-			0x22c (PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
-			0x230 (PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
-			0x234 (PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
+			AM4372_IOPAD(0xa28, PIN_OUTPUT | MUX_MODE7)	/* uart3_rxd.gpio5_2 */
+			AM4372_IOPAD(0xa2c, PIN_OUTPUT | MUX_MODE7)	/* uart3_txd.gpio5_3 */
+			AM4372_IOPAD(0xa30, PIN_OUTPUT | MUX_MODE7)	/* uart3_ctsn.gpio5_0 */
+			AM4372_IOPAD(0xa34, PIN_OUTPUT | MUX_MODE7)	/* uart3_rtsn.gpio5_1 */
 		>;
 	};
 
 	i2c0_pins: i2c0_pins {
 		pinctrl-single,pins = <
-			0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+			AM4372_IOPAD(0x988, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			AM4372_IOPAD(0x98c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 		>;
 	};
 
 	i2c1_pins: i2c1_pins {
 		pinctrl-single,pins = <
-			0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
-			0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+			AM4372_IOPAD(0x95c, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			AM4372_IOPAD(0x958, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 		>;
 	};
 
 	mmc1_pins: pinmux_mmc1_pins {
 		pinctrl-single,pins = <
-			0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
-			0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
-			0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
-			0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+			AM4372_IOPAD(0x8f0, PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
+			AM4372_IOPAD(0x8f4, PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
+			AM4372_IOPAD(0x8f8, PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
+			AM4372_IOPAD(0x8fc, PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
+			AM4372_IOPAD(0x900, PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
+			AM4372_IOPAD(0x904, PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
+			AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 		>;
 	};
 
 	ecap0_pins: backlight_pins {
 		pinctrl-single,pins = <
-			0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
+			AM4372_IOPAD(0x964, PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 		>;
 	};
 
 	edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 		pinctrl-single,pins = <
-			0x74 (PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x78 (PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
+			AM4372_IOPAD(0x874, PIN_INPUT | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
+			AM4372_IOPAD(0x878, PIN_OUTPUT | MUX_MODE7)	/* gpmc_be1n.gpio1_28 */
 		>;
 	};
 
 	vpfe0_pins_default: vpfe0_pins_default {
 		pinctrl-single,pins = <
-			0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
-			0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
-			0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
-			0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
-			0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
-			0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
-			0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
-			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
-			0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
-			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
-			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
-			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
-			0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
-			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
-			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+			AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			AM4372_IOPAD(0x9b8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
+			AM4372_IOPAD(0x9bc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
+			AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 		>;
 	};
 
 	vpfe0_pins_sleep: vpfe0_pins_sleep {
 		pinctrl-single,pins = <
-			0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9b8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9bc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+		>;
+	};
+
+	clkout1_pin: pinmux_clkout1_pin {
+		pinctrl-single,pins = <
+			0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* XDMA_EVENT_INTR0/CLKOUT1 */
 		>;
 	};
 
 	cpsw_default: cpsw_default {
 		pinctrl-single,pins = <
 			/* Slave 1 */
-			0x12c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
-			0x114 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
-			0x128 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
-			0x124 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
-			0x120 (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
-			0x11c (PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
-			0x130 (PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
-			0x118 (PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
-			0x140 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
-			0x13c (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
-			0x138 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
-			0x134 (PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
+			AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			AM4372_IOPAD(0x914, PIN_OUTPUT | MUX_MODE2)	/* mii1_txen.rgmii1_tctl */
+			AM4372_IOPAD(0x928, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td0 */
+			AM4372_IOPAD(0x924, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td1 */
+			AM4372_IOPAD(0x920, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd0.rgmii1_td2 */
+			AM4372_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE2)	/* mii1_txd1.rgmii1_td3 */
+			AM4372_IOPAD(0x930, PIN_INPUT | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			AM4372_IOPAD(0x918, PIN_INPUT | MUX_MODE2)	/* mii1_rxdv.rgmii1_rctl */
+			AM4372_IOPAD(0x940, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd0 */
+			AM4372_IOPAD(0x93c, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd1 */
+			AM4372_IOPAD(0x938, PIN_INPUT | MUX_MODE2)	/* mii1_rxd0.rgmii1_rd2 */
+			AM4372_IOPAD(0x934, PIN_INPUT | MUX_MODE2)	/* mii1_rxd1.rgmii1_rd3 */
 
 			/* Slave 2 */
-			0x58 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
-			0x40 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
-			0x54 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
-			0x50 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
-			0x4c (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
-			0x48 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
-			0x5c (PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
-			0x44 (PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
-			0x6c (PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
-			0x68 (PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
-			0x64 (PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
-			0x60 (PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
+			AM4372_IOPAD(0x858, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a6.rgmii2_tclk */
+			AM4372_IOPAD(0x840, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a0.rgmii2_tctl */
+			AM4372_IOPAD(0x854, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a5.rgmii2_td0 */
+			AM4372_IOPAD(0x850, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a4.rgmii2_td1 */
+			AM4372_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a3.rgmii2_td2 */
+			AM4372_IOPAD(0x848, PIN_OUTPUT | MUX_MODE2)	/* gpmc_a2.rgmii2_td3 */
+			AM4372_IOPAD(0x85c, PIN_INPUT | MUX_MODE2)	/* gpmc_a7.rgmii2_rclk */
+			AM4372_IOPAD(0x844, PIN_INPUT | MUX_MODE2)	/* gpmc_a1.rgmii2_rtcl */
+			AM4372_IOPAD(0x86c, PIN_INPUT | MUX_MODE2)	/* gpmc_a11.rgmii2_rd0 */
+			AM4372_IOPAD(0x868, PIN_INPUT | MUX_MODE2)	/* gpmc_a10.rgmii2_rd1 */
+			AM4372_IOPAD(0x864, PIN_INPUT | MUX_MODE2)	/* gpmc_a9.rgmii2_rd2 */
+			AM4372_IOPAD(0x860, PIN_INPUT | MUX_MODE2)	/* gpmc_a8.rgmii2_rd3 */
 		>;
 	};
 
 	cpsw_sleep: cpsw_sleep {
 		pinctrl-single,pins = <
 			/* Slave 1 reset value */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
 
 			/* Slave 2 reset value */
-			0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x858, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x840, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x854, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x850, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x85c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x864, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x860, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	davinci_mdio_default: davinci_mdio_default {
 		pinctrl-single,pins = <
 			/* MDIO */
-			0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
+			AM4372_IOPAD(0x948, PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			AM4372_IOPAD(0x94c, PIN_OUTPUT | MUX_MODE0)			/* mdio_clk.mdio_clk */
 		>;
 	};
 
 	davinci_mdio_sleep: davinci_mdio_sleep {
 		pinctrl-single,pins = <
 			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	dss_pins: dss_pins {
 		pinctrl-single,pins = <
-			0x020 (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
-			0x024 (PIN_OUTPUT | MUX_MODE1)
-			0x028 (PIN_OUTPUT | MUX_MODE1)
-			0x02c (PIN_OUTPUT | MUX_MODE1)
-			0x030 (PIN_OUTPUT | MUX_MODE1)
-			0x034 (PIN_OUTPUT | MUX_MODE1)
-			0x038 (PIN_OUTPUT | MUX_MODE1)
-			0x03c (PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
-			0x0a0 (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
-			0x0a4 (PIN_OUTPUT | MUX_MODE0)
-			0x0a8 (PIN_OUTPUT | MUX_MODE0)
-			0x0ac (PIN_OUTPUT | MUX_MODE0)
-			0x0b0 (PIN_OUTPUT | MUX_MODE0)
-			0x0b4 (PIN_OUTPUT | MUX_MODE0)
-			0x0b8 (PIN_OUTPUT | MUX_MODE0)
-			0x0bc (PIN_OUTPUT | MUX_MODE0)
-			0x0c0 (PIN_OUTPUT | MUX_MODE0)
-			0x0c4 (PIN_OUTPUT | MUX_MODE0)
-			0x0c8 (PIN_OUTPUT | MUX_MODE0)
-			0x0cc (PIN_OUTPUT | MUX_MODE0)
-			0x0d0 (PIN_OUTPUT | MUX_MODE0)
-			0x0d4 (PIN_OUTPUT | MUX_MODE0)
-			0x0d8 (PIN_OUTPUT | MUX_MODE0)
-			0x0dc (PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
-			0x0e0 (PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
-			0x0e4 (PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
-			0x0e8 (PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
-			0x0ec (PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
+			AM4372_IOPAD(0x820, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 8 -> DSS DATA 23 */
+			AM4372_IOPAD(0x824, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x828, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x82c, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x830, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x834, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x838, PIN_OUTPUT | MUX_MODE1)
+			AM4372_IOPAD(0x83c, PIN_OUTPUT | MUX_MODE1)	/* gpmc ad 15 -> DSS DATA 16 */
+			AM4372_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 0 */
+			AM4372_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)
+			AM4372_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)	/* DSS DATA 15 */
+			AM4372_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0)	/* DSS VSYNC */
+			AM4372_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0)	/* DSS HSYNC */
+			AM4372_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0)	/* DSS PCLK */
+			AM4372_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0)	/* DSS AC BIAS EN */
 
 		>;
 	};
 
 	qspi_pins: qspi_pins {
 		pinctrl-single,pins = <
-			0x7c (PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
-			0x88 (PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
-			0x90 (PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
-			0x94 (PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
-			0x98 (PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
-			0x9c (PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
+			AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE3)	/* gpmc_csn0.qspi_csn */
+			AM4372_IOPAD(0x888, PIN_OUTPUT | MUX_MODE2)	/* gpmc_csn3.qspi_clk */
+			AM4372_IOPAD(0x890, PIN_INPUT | MUX_MODE3)	/* gpmc_advn_ale.qspi_d0 */
+			AM4372_IOPAD(0x894, PIN_INPUT | MUX_MODE3)	/* gpmc_oen_ren.qspi_d1 */
+			AM4372_IOPAD(0x898, PIN_INPUT | MUX_MODE3)	/* gpmc_wen.qspi_d2 */
+			AM4372_IOPAD(0x89c, PIN_INPUT | MUX_MODE3)	/* gpmc_be0n_cle.qspi_d3 */
 		>;
 	};
 
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_crs.mcasp1_aclkx */
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* mii1_rxerr.mcasp1_fsx */
+			AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* mii1_col.mcasp1_axr2 */
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4)	/* rmii1_ref_clk.mcasp1_axr3 */
+		>;
+	};
+
+	mcasp1_pins_sleep: mcasp1_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 		>;
 	};
 
 	lcd_pins: lcd_pins {
 		pinctrl-single,pins = <
-			0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
+			AM4372_IOPAD(0x81c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 		>;
 	};
 
 	usb1_pins: usb1_pins {
 		pinctrl-single,pins = <
-			0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac0, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 		>;
 	};
 
 	usb2_pins: usb2_pins {
 		pinctrl-single,pins = <
-			0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+			AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
+		>;
+	};
+
+	mmc3_pins_default: pinmux_mmc3_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
+		>;
+	};
+
+	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
+			AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
+			AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
+			AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
+			AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
+			AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
+		>;
+	};
+
+	wlan_pins_default: pinmux_wlan_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
+			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
+		>;
+	};
+
+	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* cam1_data8.gpio4_8 WL_EN */
+			AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* cam1_wen.gpio4_13 WL_IRQ */
+		>;
+	};
+
+	uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0)		/* uart1_rxd.uart1_rxd */
+			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
+			AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_ctsn.uart1_ctsn */
+			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
+		>;
+	};
+
+	uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
+		pinctrl-single,pins = <
+			AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rxd.uart1_rxd */
+			AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_txd.uart1_txd */
+			AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_ctsn.uart1_ctsn */
+			AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* uart1_rtsn.uart1_rtsn */
+			AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* cam1_data9.gpio4_7 BT_EN */
 		>;
 	};
 };
@@ -387,7 +484,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps@24 {
 		compatible = "ti,tps65218";
@@ -397,7 +494,6 @@
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			/* VDD_CORE limits min of OPP50 and max of OPP100 */
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
@@ -407,7 +503,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			/* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
@@ -417,16 +512,18 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdds_ddr";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
 			regulator-boot-on;
 			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
 		};
 
 		dcdc4: regulator-dcdc4 {
-			compatible = "ti,tps65218-dcdc4";
 			regulator-name = "v3_3d";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -434,8 +531,31 @@
 			regulator-always-on;
 		};
 
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+		};
+
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-name = "v1_8d";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
@@ -451,7 +571,7 @@
 	};
 
 	at24@50 {
-		compatible = "at24,24c256";
+		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
@@ -463,6 +583,25 @@
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&clkout1_pin>;
+
+		clocks = <&clkout1_mux_ck>;
+		clock-names = "xvclk";
+		assigned-clocks = <&clkout1_mux_ck>;
+		assigned-clock-parents = <&clkout1_osc_div_ck>;
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+
 	edt-ft5306@38 {
 		status = "okay";
 		compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
@@ -471,15 +610,18 @@
 
 		reg = <0x38>;
 		interrupt-parent = <&gpio0>;
-		interrupts = <31 0>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
 
 		reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <272>;
+
+		wakeup-source;
 	};
 
 	tlv320aic3106: tlv320aic3106@1b {
+		#sound-dai-cells = <0>;
 		compatible = "ti,tlv320aic3106";
 		reg = <0x1b>;
 		status = "okay";
@@ -520,6 +662,10 @@
 	status = "okay";
 };
 
+&gpio4 {
+	status = "okay";
+};
+
 &gpio5 {
 	status = "okay";
 };
@@ -531,7 +677,45 @@
 
 	vmmc-supply = <&dcdc4>;
 	bus-width = <4>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart1_bt_pins_default>;
+	pinctrl-1 = <&uart1_bt_pins_sleep>;
+};
+
+&mmc3 {
+	status = "okay";
+	/*
+	 * these are on the crossbar and are outlined in the
+	 * xbar-event-map element
+	 */
+	dmas = <&edma_xbar 30 0 1>,
+		<&edma_xbar 31 0 2>;
+	dma-names = "tx", "rx";
+	vmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_sleep>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&wlan_pins_default>;
+		pinctrl-1 = <&wlan_pins_sleep>;
+		reg = <2>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
 };
 
 &usb2_phy1 {
@@ -539,7 +723,7 @@
 };
 
 &usb1 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_pins>;
@@ -562,7 +746,7 @@
 	pinctrl-0 = <&qspi_pins>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -579,7 +763,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
@@ -608,31 +792,37 @@
 	};
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac = <1>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
+
+	ethphy0: ethernet-phy@4 {
+		reg = <4>;
+	};
+
+	ethphy1: ethernet-phy@5 {
+		reg = <5>;
+	};
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <4>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <5>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <2>;
 };
 
 &elm {
@@ -640,8 +830,10 @@
 };
 
 &mcasp1 {
-	pinctrl-names = "default";
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_pins_sleep>;
 
 	status = "okay";
 
@@ -670,6 +862,8 @@
 };
 
 &rtc {
+	clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
+	clock-names = "ext-clk", "int-clk";
 	status = "okay";
 };
 
@@ -690,7 +884,7 @@
 	/* Camera port */
 	port {
 		vpfe0_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
@@ -698,3 +892,11 @@
 		};
 	};
 };
+
+&wkup_m3_ipc {
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts
index 795d68af6df9..9fc915a2582e 100644
--- a/arch/arm/boot/dts/am43x-epos-evm.dts
+++ b/arch/arm/boot/dts/am43x-epos-evm.dts
@@ -1,9 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 
 /* AM43x EPOS EVM */
@@ -14,15 +11,20 @@
 #include <dt-bindings/pinctrl/am43xx.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/tlv320aic31xx.h>
 
 / {
 	model = "TI AM43x EPOS EVM";
-	compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43";
+	compatible = "ti,am43x-epos-evm","ti,am438x","ti,am43";
 
 	aliases {
 		display0 = &lcd0;
 	};
 
+	chosen {
+		stdout-path = &uart0;
+	};
+
 	vmmcsd_fixed: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -31,36 +33,19 @@
 		enable-active-high;
 	};
 
+	vbat: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
 	lcd0: display {
-		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
 		label = "lcd";
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins>;
-
-		/*
-		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
-		 * panel's enable GPIO, but we don't have HDMI driver support nor
-		 * support to switch between two displays, so using this gpio as
-		 * panel's enable should be safe.
-		 */
-		enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-
-		panel-timing {
-			clock-frequency = <33000000>;
-			hactive = <800>;
-			vactive = <480>;
-			hfront-porch = <210>;
-			hback-porch = <16>;
-			hsync-len = <30>;
-			vback-porch = <10>;
-			vfront-porch = <22>;
-			vsync-len = <13>;
-			hsync-active = <0>;
-			vsync-active = <0>;
-			de-active = <1>;
-			pixelclk-active = <1>;
-		};
+		backlight = <&lcd_bl>;
 
 		port {
 			lcd_in: endpoint {
@@ -69,10 +54,14 @@
 		};
 	};
 
-	matrix_keypad: matrix_keypad@0 {
+	matrix_keypad: matrix_keypad0 {
 		compatible = "gpio-matrix-keypad";
 		debounce-delay-ms = <5>;
 		col-scan-delay-us = <2>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&matrix_keypad_default>;
+		pinctrl-1 = <&matrix_keypad_sleep>;
+		wakeup-source;
 
 		row-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH		/* Bank0, pin12 */
 			     &gpio0 13 GPIO_ACTIVE_HIGH		/* Bank0, pin13 */
@@ -102,222 +91,451 @@
 			0x03030069>;	/* LEFT */
 	};
 
-	backlight {
+	lcd_bl: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 51 53 56 62 75 101 152 255>;
 		default-brightness-level = <8>;
 	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "AM43-EPOS-EVM";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker";
+		simple-audio-card,routing =
+			"MIC1LP", "Microphone Jack",
+			"MIC1RP", "Microphone Jack",
+			"MIC1LP", "MICBIAS",
+			"MIC1RP", "MICBIAS",
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPL",
+			"Speaker", "SPR";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp1>;
+			system-clock-frequency = <12000000>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3111>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+
+	audio_mstrclk: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12000000>;
+	};
 };
 
 &am43xx_pinmux {
+		pinctrl-names = "default";
+		pinctrl-0 = <&unused_pins>;
+
+		unused_pins: unused_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x848, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x850, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x858, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x860, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x864, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x868, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x86c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x878, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x908, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x91c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x920, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9e0, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA0c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA38, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA3c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA40, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA44, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA48, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA4c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA50, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA54, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA58, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA5c, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA60, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA64, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0xA68, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA6C, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA74, DS0_PIN_INPUT_PULLDOWN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0xA78, DS0_PIN_INPUT | PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
 		cpsw_default: cpsw_default {
 			pinctrl-single,pins = <
 				/* Slave 1 */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
-				0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
-				0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
-				0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_crs.rmii1_crs */
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxerr.rmii1_rxerr */
+				AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txen.rmii1_txen */
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxdv.rmii1_rxdv */
+				AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd1.rmii1_txd1 */
+				AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* mii1_txd0.rmii1_txd0 */
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd1.rmii1_rxd1 */
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE1)	/* mii1_rxd0.rmii1_rxd0 */
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* rmii1_refclk.rmii1_refclk */
 			>;
 		};
 
 		cpsw_sleep: cpsw_sleep {
 			pinctrl-single,pins = <
 				/* Slave 1 reset value */
-				0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		davinci_mdio_default: davinci_mdio_default {
 			pinctrl-single,pins = <
 				/* MDIO */
-				0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-				0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+				AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
 			>;
 		};
 
 		davinci_mdio_sleep: davinci_mdio_sleep {
 			pinctrl-single,pins = <
 				/* MDIO reset value */
-				0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-				0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
 		i2c0_pins: pinmux_i2c0_pins {
 			pinctrl-single,pins = <
-				0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-				0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+				AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
+				AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
+			>;
+		};
+
+		nand_flash_x8_default: nand_flash_x8_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
+				AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+				AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+				AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+				AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+				AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+				AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+				AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+				AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+				AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+				AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+				AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+				AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+				AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+				AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+				AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+			>;
+		};
+
+		nand_flash_x8_sleep: nand_flash_x8_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x840, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x800, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x804, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x808, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x80c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x810, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x814, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x818, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x81c, DS0_PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x870, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x874, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
-		nand_flash_x8: nand_flash_x8 {
+		ecap0_pins_default: backlight_pins_default {
 			pinctrl-single,pins = <
-				0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.SELQSPIorNAND/GPIO */
-				0x0  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-				0x4  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-				0x8  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-				0xc  (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-				0x10 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-				0x14 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-				0x18 (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-				0x1c (PIN_INPUT_PULLDOWN | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-				0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-				0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
-				0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-				0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-				0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-				0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-				0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+				AM4372_IOPAD(0x964, MUX_MODE0)         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 			>;
 		};
 
-		ecap0_pins: backlight_pins {
+		ecap0_pins_sleep: backlight_pins_sleep {
 			pinctrl-single,pins = <
-				0x164 MUX_MODE0         /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+				AM4372_IOPAD(0x964, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
 		i2c2_pins: pinmux_i2c2_pins {
 			pinctrl-single,pins = <
-				0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
-				0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+				AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_sda.i2c2_sda */
+				AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE8)    /* i2c2_scl.i2c2_scl */
+			>;
+		};
+
+		spi0_pins_default: pinmux_spi0_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x950, PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
+				AM4372_IOPAD(0x954, PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
+				AM4372_IOPAD(0x958, PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
+				AM4372_IOPAD(0x95c, PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+			>;
+		};
+
+		spi0_pins_sleep: pinmux_spi0_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x950, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x954, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x958, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x95c, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
-		spi0_pins: pinmux_spi0_pins {
+		spi1_pins_default: pinmux_spi1_pins_default {
 			pinctrl-single,pins = <
-				0x150 (PIN_INPUT | MUX_MODE0)           /* spi0_clk.spi0_clk */
-				0x154 (PIN_OUTPUT | MUX_MODE0)           /* spi0_d0.spi0_d0 */
-				0x158 (PIN_INPUT | MUX_MODE0)           /* spi0_d1.spi0_d1 */
-				0x15c (PIN_OUTPUT | MUX_MODE0)          /* spi0_cs0.spi0_cs0 */
+				AM4372_IOPAD(0x990, PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
+				AM4372_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
+				AM4372_IOPAD(0x998, PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
+				AM4372_IOPAD(0x99c, PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
 			>;
 		};
 
-		spi1_pins: pinmux_spi1_pins {
+		spi1_pins_sleep: pinmux_spi1_pins_sleep {
 			pinctrl-single,pins = <
-				0x190 (PIN_INPUT | MUX_MODE3)           /* mcasp0_aclkx.spi1_clk */
-				0x194 (PIN_OUTPUT | MUX_MODE3)           /* mcasp0_fsx.spi1_d0 */
-				0x198 (PIN_INPUT | MUX_MODE3)           /* mcasp0_axr0.spi1_d1 */
-				0x19c (PIN_OUTPUT | MUX_MODE3)          /* mcasp0_ahclkr.spi1_cs0 */
+				AM4372_IOPAD(0x990, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x994, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x998, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x99c, DS0_PIN_OUTPUT_PULLDOWN | PIN_OUTPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 
-		mmc1_pins: pinmux_mmc1_pins {
+		mmc1_pins_default: pinmux_mmc1_pins_default {
 			pinctrl-single,pins = <
-				0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+				AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 			>;
 		};
 
-		qspi1_default: qspi1_default {
+		mmc1_pins_sleep: pinmux_mmc1_pins_sleep {
 			pinctrl-single,pins = <
-				0x7c (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x88 (PIN_INPUT_PULLUP | MUX_MODE2)
-				0x90 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x94 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x98 (PIN_INPUT_PULLUP | MUX_MODE3)
-				0x9c (PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x960, DS0_PIN_OUTPUT_PULLUP | PIN_INPUT | MUX_MODE7)
 			>;
 		};
 
-		pixcir_ts_pins: pixcir_ts_pins {
+		matrix_keypad_default: matrix_keypad_default {
 			pinctrl-single,pins = <
-				0x44 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+				 AM4372_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7)          /* mii1_tx_clk.gpio3_9 */
+				 AM4372_IOPAD(0x930, PIN_OUTPUT | MUX_MODE7)          /* mii1_rx_clk.gpio3_10 */
+				 AM4372_IOPAD(0x934, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd3.gpio2_18 */
+				 AM4372_IOPAD(0x938, PIN_OUTPUT | MUX_MODE7)          /* mii1_rxd2.gpio2_19 */
+				 AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_ctsn.gpio0_12 */
+				 AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rtsn.gpio0_13 */
+				 AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_rxd.gpio0_14 */
+				 AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)  /* uart1_txd.gpio0_15 */
+			>;
+		};
+
+		matrix_keypad_sleep: matrix_keypad_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x92c, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x930, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x938, PIN_INPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x978, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x97C, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x980, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x984, PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		qspi1_pins_default: qspi1_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x87c, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE2)
+				AM4372_IOPAD(0x890, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x894, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x898, PIN_INPUT_PULLUP | MUX_MODE3)
+				AM4372_IOPAD(0x89c, PIN_INPUT_PULLUP | MUX_MODE3)
+			>;
+		};
+
+		qspi1_pins_sleep: qspi1_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x87c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x888, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x890, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x894, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x898, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x89c, DS0_PIN_OUTPUT_PULLUP | MUX_MODE7)
+			>;
+		};
+
+		pixcir_ts_pins_default: pixcir_ts_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
+			>;
+		};
+
+		pixcir_ts_pins_sleep: pixcir_ts_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x844, DS0_PIN_OUTPUT_PULLUP | PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_a1.gpio1_17 */
 			>;
 		};
 
 		hdq_pins: pinmux_hdq_pins {
 			pinctrl-single,pins = <
-				0x234 (PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
+				AM4372_IOPAD(0xa34, PIN_INPUT_PULLUP | MUX_MODE1)    /* cam1_wen.hdq_gpio */
 			>;
 		};
 
 		dss_pins: dss_pins {
 			pinctrl-single,pins = <
-				0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
-				0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
-				0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
-				0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
-				0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
-				0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
-				0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
-				0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
-				0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
-				0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
-			>;
-		};
-
-		lcd_pins: lcd_pins {
+				AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+				AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
+				AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+				AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+				AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8B8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
+				AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+				AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+				AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+				AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+				AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+			>;
+		};
+
+		display_mux_pins: display_mux_pins {
 			pinctrl-single,pins = <
 				/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
-				0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
+				AM4372_IOPAD(0x88C, PIN_OUTPUT_PULLUP | MUX_MODE7)
 			>;
 		};
 
 		vpfe1_pins_default: vpfe1_pins_default {
 			pinctrl-single,pins = <
-				0x1cc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
-				0x1d0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
-				0x1d4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
-				0x1d8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
-				0x1dc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
-				0x1e8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
-				0x1ec (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
-				0x1f0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
-				0x1f4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
-				0x1f8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
-				0x1fc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
-				0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
-				0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
+				AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0 */
+				AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0 */
+				AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0 */
+				AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0 */
+				AM4372_IOPAD(0x9dc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0 */
+				AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0 */
+				AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0 */
+				AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0 */
+				AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0 */
+				AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0 */
+				AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0 */
+				AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0 */
+				AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0 */
 			>;
 		};
 
 		vpfe1_pins_sleep: vpfe1_pins_sleep {
 			pinctrl-single,pins = <
-				0x1cc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1d8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1dc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1e8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1ec (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1f8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x1fc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
-				0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+			>;
+		};
+
+		uart0_pins_default: uart0_pins_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
+				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
+				AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
+				AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)	/* uart0_txd.uart0_txd */
+			>;
+		};
+
+		uart0_pins_sleep: uart0_pins_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
+				AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+				AM4372_IOPAD(0x974, PIN_INPUT | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0)
+			>;
+		};
+
+		usb2_phy1_default: usb2_phy1_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac0, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			>;
+		};
+
+		usb2_phy1_sleep: usb2_phy1_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac0, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		usb2_phy2_default: usb2_phy2_default {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac4, PIN_INPUT_PULLDOWN | MUX_MODE0)
+			>;
+		};
+
+		usb2_phy2_sleep: usb2_phy2_sleep {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0xac4, DS0_PULL_UP_DOWN_EN | PIN_INPUT_PULLDOWN | MUX_MODE7)
+			>;
+		};
+
+		mcasp1_pins: mcasp1_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
+				AM4372_IOPAD(0x9a8, PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
+			>;
+		};
+
+		mcasp1_sleep_pins: mcasp1_sleep_pins {
+			pinctrl-single,pins = <
+				AM4372_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a4, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9a8, PIN_INPUT_PULLDOWN | MUX_MODE7)
+				AM4372_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE7)
 			>;
 		};
 };
@@ -326,54 +544,54 @@
 	status = "okay";
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins>;
-	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_sleep>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 };
 
-&mac {
+&mac_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cpsw_default>;
 	pinctrl-1 = <&cpsw_sleep>;
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&davinci_mdio_default>;
 	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <16>;
-	phy-mode = "rmii";
+	ethphy0: ethernet-phy@16 {
+		reg = <16>;
+	};
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <1>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rmii";
+	phys = <&phy_gmii_sel 1 1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&phy_sel {
-	rmii-clock-ext;
+&cpsw_port2 {
+	status = "disabled";
 };
 
 &i2c0 {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;
 		compatible = "ti,tps65218";
-		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
 		dcdc1: regulator-dcdc1 {
-			compatible = "ti,tps65218-dcdc1";
 			regulator-name = "vdd_core";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1144000>;
@@ -382,7 +600,6 @@
 		};
 
 		dcdc2: regulator-dcdc2 {
-			compatible = "ti,tps65218-dcdc2";
 			regulator-name = "vdd_mpu";
 			regulator-min-microvolt = <912000>;
 			regulator-max-microvolt = <1378000>;
@@ -391,30 +608,42 @@
 		};
 
 		dcdc3: regulator-dcdc3 {
-			compatible = "ti,tps65218-dcdc3";
 			regulator-name = "vdcdc3";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-state-mem {
+				regulator-on-in-suspend;
+			};
+			regulator-state-disk {
+				regulator-off-in-suspend;
+			};
+		};
+
+		dcdc4: regulator-dcdc4 {
+			regulator-name = "vdcdc4";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
 		dcdc5: regulator-dcdc5 {
-			compatible = "ti,tps65218-dcdc5";
 			regulator-name = "v1_0bat";
 			regulator-min-microvolt = <1000000>;
 			regulator-max-microvolt = <1000000>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		dcdc6: regulator-dcdc6 {
-			compatible = "ti,tps65218-dcdc6";
 			regulator-name = "v1_8bat";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
 		};
 
 		ldo1: regulator-ldo1 {
-			compatible = "ti,tps65218-ldo1";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1800000>;
 			regulator-boot-on;
@@ -423,24 +652,58 @@
 	};
 
 	at24@50 {
-		compatible = "at24,24c256";
+		compatible = "atmel,24c256";
 		pagesize = <64>;
 		reg = <0x50>;
 	};
 
 	pixcir_ts@5c {
 		compatible = "pixcir,pixcir_tangoc";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pixcir_ts_pins>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pixcir_ts_pins_default>;
+		pinctrl-1 = <&pixcir_ts_pins_sleep>;
+
 		reg = <0x5c>;
 		interrupt-parent = <&gpio1>;
-		interrupts = <17 0>;
+		interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
 
 		attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 
 		touchscreen-size-x = <1024>;
 		touchscreen-size-y = <600>;
 	};
+
+	tlv320aic3111: tlv320aic3111@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3111";
+		reg = <0x18>;
+		status = "okay";
+
+		ai31xx-micbias-vg = <MICBIAS_2_0V>;
+
+		/* Regulators */
+		HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		SPRVDD-supply = <&vbat>; /* vbat */
+		SPLVDD-supply = <&vbat>; /* vbat */
+		AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
+		IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
+		DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&audio_mstrclk>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -458,7 +721,21 @@
 };
 
 &gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&display_mux_pins>;
 	status = "okay";
+
+	sel-lcd-hdmi-hog {
+		/*
+		 * SelLCDorHDMI selects between display and audio paths:
+		 * Low: HDMI display with audio via HDMI
+		 * High: LCD display with analog audio via aic3111 codec
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SelLCDorHDMI";
+	};
 };
 
 &gpio3 {
@@ -471,11 +748,18 @@
 
 &gpmc {
 	status = "okay";	/* Disable QSPI when enabling GPMC (NAND) */
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x8>;
-	ranges = <0 0 0x08000000 0x1000000>;	/* CS0: 16MB for NAND */
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&nand_flash_x8_default>;
+	pinctrl-1 = <&nand_flash_x8_sleep>;
+	ranges = <0 0 0x08000000 0x01000000>;	/* CS0 space. Min partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>;	/* gpmc_wait0 */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch16";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <8>;
@@ -494,11 +778,9 @@
 		gpmc,access-ns = <30>; /* tCEA + 4*/
 		gpmc,rd-cycle-ns = <40>;
 		gpmc,wr-cycle-ns = <40>;
-		gpmc,wait-pin = <0>;
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
@@ -554,6 +836,10 @@
 	status = "okay";
 };
 
+&rtc_target {
+	status = "disabled";
+};
+
 &tscadc {
 	status = "okay";
 
@@ -564,33 +850,44 @@
 
 &ecap0 {
 		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&ecap0_pins_default>;
+		pinctrl-1 = <&ecap0_pins_sleep>;
 };
 
 &spi0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi0_pins>;
 	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi0_pins_default>;
+	pinctrl-1 = <&spi0_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &spi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_pins>;
 	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&spi1_pins_default>;
+	pinctrl-1 = <&spi1_pins_sleep>;
+	ti,pindir-d0-out-d1-in;
 };
 
 &usb2_phy1 {
 	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usb2_phy1_default>;
+	pinctrl-1 = <&usb2_phy1_sleep>;
 };
 
 &usb1 {
-	dr_mode = "peripheral";
+	dr_mode = "otg";
 	status = "okay";
 };
 
 &usb2_phy2 {
 	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usb2_phy2_default>;
+	pinctrl-1 = <&usb2_phy2_sleep>;
 };
 
 &usb2 {
@@ -600,11 +897,12 @@
 
 &qspi {
 	status = "disabled";	/* Disable GPMC (NAND) when enabling QSPI */
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_default>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi1_pins_default>;
+	pinctrl-1 = <&qspi1_pins_sleep>;
 
 	spi-max-frequency = <48000000>;
-	m25p80@0 {
+	flash@0 {
 		compatible = "mx66l51235l";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -621,7 +919,7 @@
 		 */
 		partition@0 {
 			label = "QSPI.U_BOOT";
-			reg = <0x00000000 0x000080000>;
+			reg = <0x00000000 0x00080000>;
 		};
 		partition@1 {
 			label = "QSPI.U_BOOT.backup";
@@ -657,13 +955,13 @@
 };
 
 &dss {
-	status = "ok";
+	status = "okay";
 
 	pinctrl-names = "default";
 	pinctrl-0 = <&dss_pins>;
 
 	port {
-		dpi_out: endpoint@0 {
+		dpi_out: endpoint {
 			remote-endpoint = <&lcd_in>;
 			data-lines = <24>;
 		};
@@ -678,7 +976,7 @@
 
 	port {
 		vpfe1_ep: endpoint {
-			/* remote-endpoint = <&sensor>; add once we have it */
+			remote-endpoint = <&ov2659_1>;
 			ti,am437x-vpfe-interface = <0>;
 			bus-width = <8>;
 			hsync-active = <0>;
@@ -686,3 +984,45 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&uart0_pins_default>;
+	pinctrl-1 = <&uart0_pins_sleep>;
+};
+
+&mcasp1 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp1_pins>;
+	pinctrl-1 = <&mcasp1_sleep_pins>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&mux_synctimer32k_ck {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};
+
+&cpu {
+	cpu0-supply = <&dcdc2>;
+};
+
+&wkup_m3_ipc {
+	firmware-name = "am43x-evm-scale-data.bin";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index d0c0dfa4ec48..9a5437b3d6a8 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -1,216 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for AM43xx clock data
  *
  * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 &scm_clocks {
-	sys_clkin_ck: sys_clkin_ck {
+	sys_clkin_ck: clock-sys-clkin-31@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin_ck";
 		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
 		ti,bit-shift = <31>;
 		reg = <0x0040>;
 	};
 
-	crystal_freq_sel_ck: crystal_freq_sel_ck {
+	crystal_freq_sel_ck: clock-crystal-freq-sel-29@40 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "crystal_freq_sel_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <29>;
 		reg = <0x0040>;
 	};
 
-	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+	sysboot_freq_sel_ck: clock-sysboot-freq-sel-22@44e10040 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sysboot_freq_sel_ck";
 		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
 		ti,bit-shift = <22>;
 		reg = <0x0040>;
 	};
 
-	adc_tsc_fck: adc_tsc_fck {
+	adc_tsc_fck: clock-adc-tsc-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "adc_tsc_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan0_fck: dcan0_fck {
+	dcan0_fck: clock-dcan0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dcan1_fck: dcan1_fck {
+	dcan1_fck: clock-dcan1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dcan1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp0_fck: mcasp0_fck {
+	mcasp0_fck: clock-mcasp0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	mcasp1_fck: mcasp1_fck {
+	mcasp1_fck: clock-mcasp1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mcasp1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex0_fck: smartreflex0_fck {
+	smartreflex0_fck: clock-smartreflex0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	smartreflex1_fck: smartreflex1_fck {
+	smartreflex1_fck: clock-smartreflex1-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "smartreflex1_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	sha0_fck: sha0_fck {
+	sha0_fck: clock-sha0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sha0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	aes0_fck: aes0_fck {
+	aes0_fck: clock-aes0-fck {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "aes0_fck";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	ehrpwm0_tbclk: ehrpwm0_tbclk {
+	rng_fck: clock-rng-fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-output-names = "rng_fck";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: clock-ehrpwm0-tbclk-0@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm0_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <0>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm1_tbclk: ehrpwm1_tbclk {
+	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-1@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm1_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <1>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm2_tbclk: ehrpwm2_tbclk {
+	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-2@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm2_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <2>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm3_tbclk: ehrpwm3_tbclk {
+	ehrpwm3_tbclk: clock-ehrpwm3-tbclk-4@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm3_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <4>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm4_tbclk: ehrpwm4_tbclk {
+	ehrpwm4_tbclk: clock-ehrpwm4-tbclk-5@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm4_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <5>;
 		reg = <0x0664>;
 	};
 
-	ehrpwm5_tbclk: ehrpwm5_tbclk {
+	ehrpwm5_tbclk: clock-ehrpwm5-tbclk-6@664 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm5_tbclk";
 		clocks = <&l4ls_gclk>;
 		ti,bit-shift = <6>;
 		reg = <0x0664>;
 	};
 };
 &prcm_clocks {
-	clk_32768_ck: clk_32768_ck {
+	clk_32768_ck: clock-clk-32768 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32768_ck";
 		clock-frequency = <32768>;
 	};
 
-	clk_rc32k_ck: clk_rc32k_ck {
+	clk_rc32k_ck: clock-clk-rc32k {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_rc32k_ck";
 		clock-frequency = <32768>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_24000000_ck: virt_24000000_ck {
+	virt_24000000_ck: clock-virt-24000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_24000000_ck";
 		clock-frequency = <24000000>;
 	};
 
-	virt_25000000_ck: virt_25000000_ck {
+	virt_25000000_ck: clock-virt-25000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_25000000_ck";
 		clock-frequency = <25000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	tclkin_ck: tclkin_ck {
+	tclkin_ck: clock-tclkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "tclkin_ck";
 		clock-frequency = <26000000>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: clock@2d20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>, <0x2d48>, <0x2d4c>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_m4_ck: dpll_core_m4_ck {
+	dpll_core_m4_ck: clock-dpll-core-m4-8@2d38 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m4_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -219,9 +253,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m5_ck: dpll_core_m5_ck {
+	dpll_core_m5_ck: clock-dpll-core-m5-8@2d3c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m5_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -230,9 +265,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_m6_ck: dpll_core_m6_ck {
+	dpll_core_m6_ck: clock-dpll-core-m6-8@2d40 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m6_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -241,16 +277,18 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: clock@2d60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>, <0x2d88>, <0x2d8c>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@2d70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -259,16 +297,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck {
+	mpu_periphclk: clock-mpu-periphclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_periphclk";
+		clocks = <&dpll_mpu_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	dpll_ddr_ck: clock@2da0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>, <0x2dc8>, <0x2dcc>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@2db0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -277,16 +326,18 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_disp_ck: dpll_disp_ck {
+	dpll_disp_ck: clock@2e20 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_disp_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>, <0x2e48>, <0x2e4c>;
 	};
 
-	dpll_disp_m2_ck: dpll_disp_m2_ck {
+	dpll_disp_m2_ck: clock-dpll-disp-m2-8@2e30 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_disp_m2_ck";
 		clocks = <&dpll_disp_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -296,16 +347,18 @@
 		ti,set-rate-parent;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: clock@2de0 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-j-type-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>, <0x2e08>, <0x2e0c>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: clock-dpll-per-m2-8@2df0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -314,281 +367,281 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+	dpll_per_m2_div4_wkupdm_ck: clock-dpll-per-m2-div4-wkupdm {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_wkupdm_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+	dpll_per_m2_div4_ck: clock-dpll-per-m2-div4 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_per_m2_div4_ck";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	clk_24mhz: clk_24mhz {
+	clk_24mhz: clock-clk-24mhz {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clk_24mhz";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	clkdiv32k_ck: clkdiv32k_ck {
+	clkdiv32k_ck: clock-clkdiv32k {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "clkdiv32k_ck";
 		clocks = <&clk_24mhz>;
 		clock-mult = <1>;
 		clock-div = <732>;
 	};
 
-	clkdiv32k_ick: clkdiv32k_ick {
+	clkdiv32k_ick: clock-clkdiv32k-ick-8@2a38 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkdiv32k_ick";
 		clocks = <&clkdiv32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x2a38>;
 	};
 
-	sysclk_div: sysclk_div {
+	sysclk_div: clock-sysclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "sysclk_div";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	pruss_ocp_gclk: pruss_ocp_gclk {
+	pruss_ocp_gclk: clock-pruss-ocp-gclk@4248 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "pruss_ocp_gclk";
 		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
 		reg = <0x4248>;
 	};
 
-	clk_32k_tpm_ck: clk_32k_tpm_ck {
+	clk_32k_tpm_ck: clock-clk-32k-tpm {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32k_tpm_ck";
 		clock-frequency = <32768>;
 	};
 
-	timer1_fck: timer1_fck {
+	timer1_fck: clock-timer1-fck@4200 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer1_fck";
 		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4200>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: clock-timer2-fck@4204 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer2_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4204>;
 	};
 
-	timer3_fck: timer3_fck {
+	timer3_fck: clock-timer3-fck@4208 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer3_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4208>;
 	};
 
-	timer4_fck: timer4_fck {
+	timer4_fck: clock-timer4-fck@420c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer4_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x420c>;
 	};
 
-	timer5_fck: timer5_fck {
+	timer5_fck: clock-timer5-fck@4210 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer5_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4210>;
 	};
 
-	timer6_fck: timer6_fck {
+	timer6_fck: clock-timer6-fck@4214 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer6_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4214>;
 	};
 
-	timer7_fck: timer7_fck {
+	timer7_fck: clock-timer7-fck@4218 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer7_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
 		reg = <0x4218>;
 	};
 
-	wdt1_fck: wdt1_fck {
+	wdt1_fck: clock-wdt1-fck@422c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wdt1_fck";
 		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
 		reg = <0x422c>;
 	};
 
-	l3_gclk: l3_gclk {
+	adc_mag_fck: adc_mag_fck@424c {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&dpll_per_m2_ck>;
+		reg = <0x424c>;
+	};
+
+	l3_gclk: clock-l3-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+	dpll_core_m4_div2_ck: clock-dpll-core-m4-div2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_core_m4_div2_ck";
 		clocks = <&sysclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l4hs_gclk: l4hs_gclk {
+	l4hs_gclk: clock-l4hs-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4hs_gclk";
 		clocks = <&dpll_core_m4_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3s_gclk: l3s_gclk {
+	l3s_gclk: clock-l3s-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l3s_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l4ls_gclk: l4ls_gclk {
+	l4ls_gclk: clock-l4ls-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4ls_gclk";
 		clocks = <&dpll_core_m4_div2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+	cpsw_125mhz_gclk: clock-cpsw-125mhz-gclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_125mhz_gclk";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+	cpsw_cpts_rft_clk: clock-cpsw-cpts-rft@4238 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "cpsw_cpts_rft_clk";
 		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
 		reg = <0x4238>;
 	};
 
-	clk_32k_mosc_ck: clk_32k_mosc_ck {
+	dpll_clksel_mac_clk: clock-dpll-clksel-mac-2@4234 {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_clksel_mac_clk";
+		clocks = <&dpll_core_m5_ck>;
+		reg = <0x4234>;
+		ti,bit-shift = <2>;
+		ti,dividers = <2>, <5>;
+	};
+
+	clk_32k_mosc_ck: clock-clk-32k-mosc {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "clk_32k_mosc_ck";
 		clock-frequency = <32768>;
 	};
 
-	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+	gpio0_dbclk_mux_ck: clock-gpio0-dbclk-mux@4240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpio0_dbclk_mux_ck";
 		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4240>;
 	};
 
-	gpio0_dbclk: gpio0_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&gpio0_dbclk_mux_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2b68>;
-	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c78>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c80>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c88>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c90>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&clkdiv32k_ick>;
-		ti,bit-shift = <8>;
-		reg = <0x8c98>;
-	};
-
-	mmc_clk: mmc_clk {
+	mmc_clk: clock-mmc {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mmc_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+	gfx_fclk_clksel_ck: clock-gfx-fclk-clksel-1@423c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gfx_fclk_clksel_ck";
 		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
 		ti,bit-shift = <1>;
 		reg = <0x423c>;
 	};
 
-	gfx_fck_div_ck: gfx_fck_div_ck {
+	gfx_fck_div_ck: clock-gfx-fck-div@423c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gfx_fck_div_ck";
 		clocks = <&gfx_fclk_clksel_ck>;
 		reg = <0x423c>;
 		ti,max-div = <2>;
 	};
 
-	disp_clk: disp_clk {
+	disp_clk: clock-disp@4244 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "disp_clk";
 		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
 		reg = <0x4244>;
 		ti,set-rate-parent;
 	};
 
-	dpll_extdev_ck: dpll_extdev_ck {
+	dpll_extdev_ck: clock@2e60 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-clock";
+		clock-output-names = "dpll_extdev_ck";
 		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
-		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>, <0x2e88>, <0x2e8c>;
 	};
 
-	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+	dpll_extdev_m2_ck: clock-dpll-extdev-m2-8@2e70 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_extdev_m2_ck";
 		clocks = <&dpll_extdev_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -597,74 +650,75 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mux_synctimer32k_ck: mux_synctimer32k_ck {
+	mux_synctimer32k_ck: clock-mux-synctimer32k@4230 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "mux_synctimer32k_ck";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
 		reg = <0x4230>;
 	};
 
-	synctimer_32kclk: synctimer_32kclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&mux_synctimer32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x2a30>;
-	};
-
-	timer8_fck: timer8_fck {
+	timer8_fck: clock-timer8-fck@421c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer8_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x421c>;
 	};
 
-	timer9_fck: timer9_fck {
+	timer9_fck: clock-timer9-fck@4220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer9_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4220>;
 	};
 
-	timer10_fck: timer10_fck {
+	timer10_fck: clock-timer10-fck@4224 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer10_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4224>;
 	};
 
-	timer11_fck: timer11_fck {
+	timer11_fck: clock-timer11-fck@4228 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "timer11_fck";
 		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
 		reg = <0x4228>;
 	};
 
-	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+	cpsw_50m_clkdiv: clock-cpsw-50m-clkdiv {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_50m_clkdiv";
 		clocks = <&dpll_core_m5_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+	cpsw_5m_clkdiv: clock-cpsw-5m-clkdiv {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "cpsw_5m_clkdiv";
 		clocks = <&cpsw_50m_clkdiv>;
 		clock-mult = <1>;
 		clock-div = <10>;
 	};
 
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,am3-dpll-x2-clock";
+		clock-output-names = "dpll_ddr_x2_ck";
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+	dpll_ddr_m4_ck: clock-dpll-ddr-m4-8@2db8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m4_ck";
 		clocks = <&dpll_ddr_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -673,9 +727,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+	dpll_per_clkdcoldo: clock-dpll-per-clkdcoldo-8@2e14 {
 		#clock-cells = <0>;
 		compatible = "ti,fixed-factor-clock";
+		clock-output-names = "dpll_per_clkdcoldo";
 		clocks = <&dpll_per_ck>;
 		ti,clock-mult = <1>;
 		ti,clock-div = <1>;
@@ -684,74 +739,265 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dll_aging_clk_div: dll_aging_clk_div {
+	dll_aging_clk_div: clock-dll-aging-clk-div@4250 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dll_aging_clk_div";
 		clocks = <&sys_clkin_ck>;
 		reg = <0x4250>;
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	div_core_25m_ck: div_core_25m_ck {
+	div_core_25m_ck: clock-div-core-25m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "div_core_25m_ck";
 		clocks = <&sysclk_div>;
 		clock-mult = <1>;
 		clock-div = <8>;
 	};
 
-	func_12m_clk: func_12m_clk {
+	func_12m_clk: clock-func-12m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
 	};
 
-	vtp_clk_div: vtp_clk_div {
+	vtp_clk_div: clock-vtp-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "vtp_clk_div";
 		clocks = <&sys_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+	usbphy_32khz_clkmux: clock-usbphy-32khz-clkmux@4260 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "usbphy_32khz_clkmux";
 		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
 		reg = <0x4260>;
 	};
 
-	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
+	usb_phy0_always_on_clk32k: clock-usb-phy0-always-on-clk32k-8@2a40 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy0_always_on_clk32k";
 		clocks = <&usbphy_32khz_clkmux>;
 		ti,bit-shift = <8>;
 		reg = <0x2a40>;
 	};
 
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@2a48 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy1_always_on_clk32k";
 		clocks = <&usbphy_32khz_clkmux>;
 		ti,bit-shift = <8>;
 		reg = <0x2a48>;
 	};
 
-	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
+	clkout1_osc_div_ck: clock-clkout1-osc-div-ck {
 		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
+		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_osc_div_ck";
+		clocks = <&sys_clkin_ck>;
+		ti,bit-shift = <20>;
+		ti,max-div = <4>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clock-output-names = "clkout1_src2_mux_ck";
+		clocks = <&clk_rc32k_ck>, <&sysclk_div>, <&dpll_ddr_m2_ck>,
+			 <&dpll_per_m2_ck>, <&dpll_disp_m2_ck>,
+			 <&dpll_mpu_m2_ck>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_src2_pre_div_ck";
+		clocks = <&clkout1_src2_mux_ck>;
+		ti,bit-shift = <4>;
+		ti,max-div = <8>;
+		reg = <0x4100>;
+	};
+
+	clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clock-output-names = "clkout1_src2_post_div_ck";
+		clocks = <&clkout1_src2_pre_div_ck>;
 		ti,bit-shift = <8>;
-		reg = <0x8a60>;
+		ti,max-div = <32>;
+		ti,index-power-of-two;
+		reg = <0x4100>;
+	};
+
+	clkout1_mux_ck: clock-clkout1-mux-ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clock-output-names = "clkout1_mux_ck";
+		clocks = <&clkout1_osc_div_ck>, <&clk_rc32k_ck>,
+			 <&clkout1_src2_post_div_ck>, <&dpll_extdev_m2_ck>;
+		ti,bit-shift = <16>;
+		reg = <0x4100>;
 	};
 
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+	clkout1_ck: clock-clkout1-ck {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_clkdcoldo>;
-		ti,bit-shift = <8>;
-		reg = <0x8a68>;
+		clock-output-names = "clkout1_ck";
+		clocks = <&clkout1_mux_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x4100>;
+	};
+};
+
+&prcm {
+	wkup_cm: clock@2800 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "wkup_cm";
+		reg = <0x2800 0x400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x2800 0x400>;
+
+		l3s_tsc_clkctrl: clock@120 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_tsc_clkctrl";
+			reg = <0x120 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_aon_clkctrl: clock@228 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_aon_clkctrl";
+			reg = <0x228 0xc>;
+			#clock-cells = <2>;
+		};
+
+		l4_wkup_clkctrl: clock@220 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_wkup_clkctrl";
+			reg = <0x220 0x4>, <0x328 0x44>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	mpu_cm: clock@8300 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
+		reg = <0x8300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8300 0x100>;
+
+		mpu_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gfx_l3_cm: clock@8400 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "gfx_l3_cm";
+		reg = <0x8400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8400 0x100>;
+
+		gfx_l3_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "gfx_l3_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4_rtc_cm: clock@8500 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l4_rtc_cm";
+		reg = <0x8500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8500 0x100>;
+
+		l4_rtc_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4_rtc_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	per_cm: clock@8800 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "per_cm";
+		reg = <0x8800 0xc00>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x8800 0xc00>;
+
+		l3_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3_clkctrl";
+			reg = <0x20 0x3c>, <0x78 0x2c>;
+			#clock-cells = <2>;
+		};
+
+		l3s_clkctrl: clock@68 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3s_clkctrl";
+			reg = <0x68 0xc>, <0x220 0x4c>;
+			#clock-cells = <2>;
+		};
+
+		pruss_ocp_clkctrl: clock@320 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "pruss_ocp_clkctrl";
+			reg = <0x320 0x4>;
+			#clock-cells = <2>;
+		};
+
+		l4ls_clkctrl: clock@420 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4ls_clkctrl";
+			reg = <0x420 0x1a4>;
+			#clock-cells = <2>;
+		};
+
+		emif_clkctrl: clock@720 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
+			reg = <0x720 0x4>;
+			#clock-cells = <2>;
+		};
+
+		dss_clkctrl: clock@a20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
+			reg = <0xa20 0x4>;
+			#clock-cells = <2>;
+		};
+
+		cpsw_125mhz_clkctrl: clock@b20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "cpsw_125mhz_clkctrl";
+			reg = <0xb20 0x4>;
+			#clock-cells = <2>;
+		};
+
 	};
 };
diff --git a/arch/arm/boot/dts/am57-pruss.dtsi b/arch/arm/boot/dts/am57-pruss.dtsi
new file mode 100644
index 000000000000..46c5383f0eee
--- /dev/null
+++ b/arch/arm/boot/dts/am57-pruss.dtsi
@@ -0,0 +1,226 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * Common PRUSS data for TI AM57xx platforms
+ */
+
+&ocp {
+	pruss1_tm: target-module@4b226000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b226000 0x4>,
+		      <0x4b226004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b200000 0x80000>;
+
+		pruss1: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss1_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss1_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss1_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss1_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss1_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru1_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_0-fw";
+			};
+
+			pru1_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru1_1-fw";
+			};
+
+			pruss1_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
+	};
+
+	pruss2_tm: target-module@4b2a6000 {
+		compatible = "ti,sysc-pruss", "ti,sysc";
+		reg = <0x4b2a6000 0x4>,
+		      <0x4b2a6004 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
+				 SYSC_PRUSS_SUB_MWAIT)>;
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>,
+				<SYSC_IDLE_SMART>;
+		/* Domains (P, C): coreaon_pwrdm, l4per2_clkdm */
+		clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x4b280000 0x80000>;
+
+		pruss2: pruss@0 {
+			compatible = "ti,am5728-pruss";
+			reg = <0x0 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			pruss2_mem: memories@0 {
+				reg = <0x0 0x2000>,
+				      <0x2000 0x2000>,
+				      <0x10000 0x8000>;
+				reg-names = "dram0", "dram1",
+					    "shrdram2";
+			};
+
+			pruss2_cfg: cfg@26000 {
+				compatible = "ti,pruss-cfg", "syscon";
+				reg = <0x26000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x26000 0x2000>;
+
+				clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					pruss2_iepclk_mux: iepclk-mux@30 {
+						reg = <0x30>;
+						#clock-cells = <0>;
+						clocks = <&dpll_gmac_m3x2_ck>,  /* icss_iep_clk */
+							 <&dpll_gmac_h13x2_ck>; /* icss_clk */
+					};
+				};
+			};
+
+			pruss2_mii_rt: mii-rt@32000 {
+				compatible = "ti,pruss-mii", "syscon";
+				reg = <0x32000 0x58>;
+			};
+
+			pruss2_intc: interrupt-controller@20000 {
+				compatible = "ti,pruss-intc";
+				reg = <0x20000 0x2000>;
+				interrupt-controller;
+				#interrupt-cells = <3>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "host_intr0", "host_intr1",
+						  "host_intr2", "host_intr3",
+						  "host_intr4", "host_intr5",
+						  "host_intr6", "host_intr7";
+			};
+
+			pru2_0: pru@34000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x34000 0x3000>,
+				      <0x22000 0x400>,
+				      <0x22400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_0-fw";
+			};
+
+			pru2_1: pru@38000 {
+				compatible = "ti,am5728-pru";
+				reg = <0x38000 0x3000>,
+				      <0x24000 0x400>,
+				      <0x24400 0x100>;
+				reg-names = "iram", "control", "debug";
+				firmware-name = "am57xx-pru2_1-fw";
+			};
+
+			pruss2_mdio: mdio@32400 {
+				compatible = "ti,davinci_mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&dpll_gmac_h13x2_ck>;
+				clock-names = "fck";
+				bus_freq = <1000000>;
+				reg = <0x32400 0x90>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am5718.dtsi b/arch/arm/boot/dts/am5718.dtsi
new file mode 100644
index 000000000000..6d7530a48c73
--- /dev/null
+++ b/arch/arm/boot/dts/am5718.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra72x.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+	compatible = "ti,am5718", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5718
+ *
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3
+ */
+
+&usb3_tm {
+	status = "disabled";
+};
+
+&atl_tm {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am571x-idk-touchscreen.dtso b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..c051ee6c1130
--- /dev/null
+++ b/arch/arm/boot/dts/am571x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
new file mode 100644
index 000000000000..48425020281a
--- /dev/null
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am5718.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include "am57xx-idk-common.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
+
+/ {
+	model = "TI AM5718 IDK";
+	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		usr1-led {
+			label = "status1:red:usr";
+			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		usr2-led {
+			label = "status1:green:usr";
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
new file mode 100644
index 000000000000..5e0bdf16d485
--- /dev/null
+++ b/arch/arm/boot/dts/am5728.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+	compatible = "ti,am5728", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5728
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+	status = "disabled";
+};
+
+&usb4_tm {
+	status = "disabled";
+};
+
+&atl_tm {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
new file mode 100644
index 000000000000..149cfafb90bf
--- /dev/null
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+/ {
+	model = "BeagleBoard.org BeagleBone AI";
+	compatible = "beagle,am5729-beagleboneai", "ti,am5728",
+		     "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+		display0 = &hdmi_conn;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+	};
+
+	vdd_adc: gpioregulator-vdd_adc {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_adc";
+		vin-supply = <&vdd_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0
+			3300000 1>;
+	};
+
+	vdd_5v: fixedregulator-vdd_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&vdd_ddr>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr4";
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+			default-state = "off";
+		};
+	};
+
+	hdmi_conn: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_encoder_out>;
+			};
+		};
+	};
+
+	hdmi_enc: encoder@0 {
+		/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
+		 *  no need for individual driver
+		 */
+		compatible = "ti,tpd12s015";
+		gpios = <0>,
+			<0>,
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			port@0 {
+				reg = <0x0>;
+
+				hdmi_encoder_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <0x1>;
+
+				hdmi_encoder_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+	};
+
+	brcmf_pwrseq: brcmf_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>,	/* BT-REG-ON */
+				<&gpio3 18 GPIO_ACTIVE_LOW>;	/* WL-REG-ON */
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		ti,enable-id-detection;
+		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vdd_5v>;
+			smps3-in-supply = <&vdd_5v>;
+			smps45-in-supply = <&vdd_5v>;
+			smps6-in-supply = <&vdd_5v>;
+			smps7-in-supply = <&vdd_5v>;
+			mps3-in-supply = <&vdd_5v>;
+			smps8-in-supply = <&vdd_5v>;
+			smps9-in-supply = <&vdd_5v>;
+			ldo1-in-supply = <&vdd_5v>;
+			ldo2-in-supply = <&vdd_5v>;
+			ldo3-in-supply = <&vdd_5v>;
+			ldo4-in-supply = <&vdd_5v>;
+			ldo9-in-supply = <&vdd_5v>;
+			ldoln-in-supply = <&vdd_5v>;
+			ldousb-in-supply = <&vdd_5v>;
+			ldortc-in-supply = <&vdd_5v>;
+
+			regulators {
+				vdd_mpu: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_ddr: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_dspeve: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_core: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;	/*** 1.15V */
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_iva: smps8 {
+					/* VDD_IVAHD */				/*** 1.06V */
+					regulator-name = "smps8";
+				};
+
+				vdd_3v3: smps9 {
+					/* VDD_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_sd: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_1v8: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo3: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo4: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				vdd_rtc: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = < 840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_pll: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio2>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		st,mod-12b = <1>; /* 12-bit ADC */
+		st,ref-sel = <0>; /* internal ADC reference */
+		st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
+		st,sample-time = <4>; /* ADC converstion time: 80 clocks */
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
+			adc0: iio-device@0 {
+				#io-channel-cells = <1>;
+				iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
+				iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
+					"AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
+			};
+		};
+
+		stmpe_touchscreen {
+			status = "disabled";
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+		};
+
+		stmpe_pwm {
+			compatible = "st,stmpe-pwm";
+			#pwm-cells = <2>;
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&vdd_mpu>;
+	voltage-tolerance = <1>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&davinci_mdio_sw {
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;
+
+	phy0: ethernet-phy@4 {
+		reg = <4>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
+};
+
+&ocp {
+	pruss1_shmem: pruss_shmem@4b200000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b200000 0x020000>;
+	};
+
+	pruss2_shmem: pruss_shmem@4b280000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b280000 0x020000>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_sd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vdd_1v8>;
+	vqmmc-supply = <&vdd_1v8>;
+	bus-width = <8>;
+	ti,non-removable;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	ti,needs-special-reset;
+	dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
+	dma-names = "tx", "rx";
+
+};
+
+&mmc4 {
+	/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
+	/* HS: High speed up to 50 MHz (3.3 V signaling). */
+	/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
+	/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
+	/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
+	/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
+	/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
+	status = "okay";
+
+	ti,needs-special-reset;
+	vmmc-supply = <&vdd_3v3>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	bus-width = <4>;
+	ti,non-removable;
+	non-removable;
+	no-1-8-v;
+	max-frequency = <24000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmc-pwrseq = <&brcmf_pwrseq>;
+
+	brcmf: wifi@1 {
+		status = "okay";
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		brcm,sd-head-align = <4>;
+		brcm,sd_head_align = <4>;
+		brcm,sd_sgentry_align = <512>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&dss {
+	status = "okay";
+	vdda_video-supply = <&vdd_1v8_pll>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdd_1v8_phy_ldo4>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_encoder_in>;
+		};
+	};
+};
+
+&bandgap {
+	status = "okay";
+};
+
+&cpu_alert0 {
+	temperature = <55000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+/* bluetooth */
+&uart6 {
+	status = "okay";
+};
+
+/* cape header stuff */
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpu0_opp_table {
+	opp_slow-500000000 {
+		opp-shared;
+	};
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
new file mode 100644
index 000000000000..1d66278c3a72
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-idk-common.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	status-leds {
+		compatible = "gpio-leds";
+		cpu0-led {
+			label = "status0:red:cpu0";
+			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu0";
+		};
+
+		usr0-led {
+			label = "status0:green:usr";
+			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat-led {
+			label = "status0:blue:heartbeat";
+			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		cpu1-led {
+			label = "status1:red:cpu1";
+			gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "cpu1";
+		};
+
+		usr1-led {
+			label = "status1:green:usr";
+			gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		mmc0-led {
+			label = "status1:blue:mmc0";
+			gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+};
+
+&extcon_usb2 {
+	id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
+};
+
+&sn65hvs882 {
+	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/am572x-idk-touchscreen.dtso b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
new file mode 100644
index 000000000000..573e932b1239
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk-touchscreen.dtso
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen: edt-ft5506@38 {
+		compatible = "edt,edt-ft5506", "edt,edt-ft5x06";
+
+		reg = <0x38>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+		/* GPIO line is inverted before going to touch panel */
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+
+		touchscreen-size-x = <1920>;
+		touchscreen-size-y = <1200>;
+
+		wakeup-source;
+	};
+};
diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
new file mode 100644
index 000000000000..94a738cb0a4d
--- /dev/null
+++ b/arch/arm/boot/dts/am572x-idk.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "am5728.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+	model = "TI AM5728 IDK";
+	compatible = "ti,am5728-idk", "ti,am5728", "ti,dra7";
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am5748.dtsi b/arch/arm/boot/dts/am5748.dtsi
new file mode 100644
index 000000000000..a1f029e9d1f3
--- /dev/null
+++ b/arch/arm/boot/dts/am5748.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x-p.dtsi"
+#include "am57-pruss.dtsi"
+
+/ {
+	compatible = "ti,am5748", "ti,dra762", "ti,dra7";
+};
+
+/*
+ * These modules are not present on AM5748
+ *
+ * EVE1, EVE2
+ * ATL
+ * VCP1, VCP2
+ * MLB
+ * ISS
+ * USB3, USB4
+ */
+
+&usb3_tm {
+	status = "disabled";
+};
+
+&usb4_tm {
+	status = "disabled";
+};
+
+&atl_tm {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am574x-idk.dts b/arch/arm/boot/dts/am574x-idk.dts
new file mode 100644
index 000000000000..47b9174d2353
--- /dev/null
+++ b/arch/arm/boot/dts/am574x-idk.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+
+/dts-v1/;
+
+#include "am5748.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include "am572x-idk-common.dtsi"
+
+/ {
+	model = "TI AM5748 IDK";
+	compatible = "ti,am5748-idk", "ti,am5748", "ti,dra762", "ti,dra7";
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	flash@0 {
+		spi-max-frequency = <96000000>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_default>;
+	pinctrl-2 = <&mmc2_pins_default>;
+};
+
+&emif1 {
+	status = "okay";
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
new file mode 100644
index 000000000000..994e69ab38d7
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -0,0 +1,647 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "am5728.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &mcp_rtc;
+		rtc1 = &tps659038_rtc;
+		rtc2 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	main_12v0: fixedregulator-main_12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "main_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of TPS54531D */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&regen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd_fixed";
+		vin-supply = <&vdd_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&smps3_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beagle-x15:usr0";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beagle-x15:usr1";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beagle-x15:usr2";
+			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beagle-x15:usr3";
+			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+			default-state = "off";
+		};
+	};
+
+	gpio_fan: gpio_fan {
+		/* Based on 5v 500mA AFB02505HHB */
+		compatible = "gpio-fan";
+		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0     0>,
+				     <13000 1>;
+		#cooling-cells = <2>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "BeagleBoard-X15";
+		simple-audio-card,widgets =
+			"Line", "Line Out",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Line Out",	"LLOUT",
+			"Line Out",	"RLOUT",
+			"MIC2L",	"Line In",
+			"MIC2R",	"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		sound0_master: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3104>;
+			clocks = <&clkout2_clk>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_CORE */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS7 unused */
+
+				smps8_reg: smps8 {
+					/* VDD_1V8 */
+					regulator-name = "smps8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* SMPS9 unused */
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_SHV5 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			vbus-gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		};
+
+	};
+
+	tmp102: tmp102@48 {
+		compatible = "ti,tmp102";
+		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	tlv320aic3104: tlv320aic3104@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3104";
+		reg = <0x18>;
+		assigned-clocks = <&clkoutmux2_clk_mux>;
+		assigned-clock-parents = <&sys_clk2_dclk_div>;
+
+		status = "okay";
+		adc-settle-ms = <40>;
+
+		AVDD-supply = <&vdd_3v3>;
+		IOVDD-supply = <&vdd_3v3>;
+		DRVDD-supply = <&vdd_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	mcp_rtc: rtc@6f {
+		compatible = "microchip,mcp7941x";
+		reg = <0x6f>;
+		interrupts-extended = <&crossbar_mpu GIC_SPI 2 IRQ_TYPE_EDGE_RISING>,
+				      <&dra7_pmx_core 0x424>;
+		interrupt-names = "irq", "wakeup";
+
+		vcc-supply = <&vdd_3v3>;
+		wakeup-source;
+	};
+};
+
+&gpio7_target {
+	ti,no-reset-on-init;
+	ti,no-idle-on-init;
+};
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+};
+
+&davinci_mdio_sw {
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@2 {
+		reg = <2>;
+	};
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	/*
+	 * Stand alone usage is peripheral only.
+	 * However, with some resistor modifications
+	 * this port can be used via expansion connectors
+	 * as "host" or "dual-role". If so, provide
+	 * the necessary dr_mode override in the expansion
+	 * board's DT.
+	 */
+	dr_mode = "peripheral";
+};
+
+&cpu_trips {
+	cpu_alert1: cpu_alert1 {
+		temperature = <50000>; /* millicelsius */
+		hysteresis = <2000>; /* millicelsius */
+		type = "active";
+	};
+};
+
+&cpu_cooling_maps {
+	map1 {
+		trip = <&cpu_alert1>;
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
+&thermal_zones {
+	board_thermal: board_thermal {
+		polling-delay-passive = <1250>; /* milliseconds */
+		polling-delay = <1500>; /* milliseconds */
+
+				/* sensor       ID */
+		thermal-sensors = <&tmp102     0>;
+
+		board_trips: trips {
+			board_alert0: board_alert {
+				temperature = <40000>; /* millicelsius */
+				hysteresis = <2000>; /* millicelsius */
+				type = "active";
+			};
+
+			board_crit: board_crit {
+				temperature = <105000>; /* millicelsius */
+				hysteresis = <0>; /* millicelsius */
+				type = "critical";
+			};
+		};
+
+		board_cooling_maps: cooling-maps {
+			map0 {
+				trip = <&board_alert0>;
+				cooling-device =
+				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+       };
+};
+
+&dss {
+	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&pcie1_rc {
+	status = "okay";
+	gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+	assigned-clock-parents = <&sys_clkin2>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
new file mode 100644
index 000000000000..83e174e053c7
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revb1.dts
@@ -0,0 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev B1";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
+};
+
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+	max-speed = <100>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
new file mode 100644
index 000000000000..656dd84460d2
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-revc.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-beagle-x15-common.dtsi"
+
+/ {
+	model = "TI AM5728 BeagleBoard-X15 rev C";
+};
+
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_3_3v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20>;
+};
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index a63bf78191ea..0a8b16505ed9 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -1,695 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
-/dts-v1/;
 
-#include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "am57xx-beagle-x15-common.dtsi"
 
 / {
+	/* NOTE: This describes the "original" pre-production A2 revision */
 	model = "TI AM5728 BeagleBoard-X15";
-	compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
-
-	aliases {
-		rtc0 = &mcp_rtc;
-		rtc1 = &tps659038_rtc;
-		rtc2 = &rtc;
-		display0 = &hdmi0;
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x80000000>;
-	};
-
-	vdd_3v3: fixedregulator-vdd_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3";
-		vin-supply = <&regen1>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		/* TPS51200 */
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		vin-supply = <&smps3_reg>;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&leds_pins_default>;
-
-		led@0 {
-			label = "beagle-x15:usr0";
-			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led@1 {
-			label = "beagle-x15:usr1";
-			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "cpu0";
-			default-state = "off";
-		};
-
-		led@2 {
-			label = "beagle-x15:usr2";
-			gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led@3 {
-			label = "beagle-x15:usr3";
-			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ide-disk";
-			default-state = "off";
-		};
-	};
-
-	gpio_fan: gpio_fan {
-		/* Based on 5v 500mA AFB02505HHB */
-		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
-		gpio-fan,speed-map = <0     0>,
-				     <13000 1>;
-		#cooling-cells = <2>;
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb1_pins>;
-	};
-
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb2_pins>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
-		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
-			<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
-		};
-	};
-};
-
-&dra7_pmx_core {
-	leds_pins_default: leds_pins_default {
-		pinctrl-single,pins = <
-			0x3a8 (PIN_OUTPUT | MUX_MODE14)	/* spi1_d1.gpio7_8 */
-			0x3ac (PIN_OUTPUT | MUX_MODE14)	/* spi1_d0.gpio7_9 */
-			0x3c0 (PIN_OUTPUT | MUX_MODE14)	/* spi2_sclk.gpio7_14 */
-			0x3c4 (PIN_OUTPUT | MUX_MODE14)	/* spi2_d1.gpio7_15 */
-		>;
-	};
-
-	i2c1_pins_default: i2c1_pins_default {
-		pinctrl-single,pins = <
-			0x400 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
-			0x404 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
-		>;
-	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
-		>;
-	};
-
-	i2c3_pins_default: i2c3_pins_default {
-		pinctrl-single,pins = <
-			0x2a4 (PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
-			0x2a8 (PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
-		>;
-	};
-
-	uart3_pins_default: uart3_pins_default {
-		pinctrl-single,pins = <
-			0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
-			0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	cpsw_pins_default: cpsw_pins_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tclk */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_tctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii1_td0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rclk */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii1_rd0 */
-
-			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tclk */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* rgmii2_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* rgmii2_rd0 */
-		>;
-
-	};
-
-	cpsw_pins_sleep: cpsw_pins_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x250 (PIN_INPUT | MUX_MODE15)
-			0x254 (PIN_INPUT | MUX_MODE15)
-			0x258 (PIN_INPUT | MUX_MODE15)
-			0x25c (PIN_INPUT | MUX_MODE15)
-			0x260 (PIN_INPUT | MUX_MODE15)
-			0x264 (PIN_INPUT | MUX_MODE15)
-			0x268 (PIN_INPUT | MUX_MODE15)
-			0x26c (PIN_INPUT | MUX_MODE15)
-			0x270 (PIN_INPUT | MUX_MODE15)
-			0x274 (PIN_INPUT | MUX_MODE15)
-			0x278 (PIN_INPUT | MUX_MODE15)
-			0x27c (PIN_INPUT | MUX_MODE15)
-
-			/* Slave 2 */
-			0x198 (PIN_INPUT | MUX_MODE15)
-			0x19c (PIN_INPUT | MUX_MODE15)
-			0x1a0 (PIN_INPUT | MUX_MODE15)
-			0x1a4 (PIN_INPUT | MUX_MODE15)
-			0x1a8 (PIN_INPUT | MUX_MODE15)
-			0x1ac (PIN_INPUT | MUX_MODE15)
-			0x1b0 (PIN_INPUT | MUX_MODE15)
-			0x1b4 (PIN_INPUT | MUX_MODE15)
-			0x1b8 (PIN_INPUT | MUX_MODE15)
-			0x1bc (PIN_INPUT | MUX_MODE15)
-			0x1c0 (PIN_INPUT | MUX_MODE15)
-			0x1c4 (PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_pins_default: davinci_mdio_pins_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_mclk */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_d */
-		>;
-	};
-
-	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
-		pinctrl-single,pins = <
-			0x23c (PIN_INPUT | MUX_MODE15)
-			0x240 (PIN_INPUT | MUX_MODE15)
-		>;
-	};
-
-	tps659038_pins_default: tps659038_pins_default {
-		pinctrl-single,pins = <
-			0x418 (PIN_INPUT_PULLUP | MUX_MODE14)	/* wakeup0.gpio1_0 */
-		>;
-	};
-
-	tmp102_pins_default: tmp102_pins_default {
-		pinctrl-single,pins = <
-			0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14)	/* spi2_d0.gpio7_16 */
-		>;
-	};
-
-	mcp79410_pins_default: mcp79410_pins_default {
-		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1)	/* wakeup3.sys_nirq1 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	extcon_usb1_pins: extcon_usb1_pins {
-		pinctrl-single,pins = <
-			0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
-		>;
-	};
-
-	extcon_usb2_pins: extcon_usb2_pins {
-		pinctrl-single,pins = <
-			0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
-		>;
-	};
-
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x3b0 (PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14)	/* gpio7_12 HPD */
-			0x370 (PIN_OUTPUT | MUX_MODE14)		/* gpio6_28 LS_OE */
-		>;
-	};
-};
-
-&i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_default>;
-	clock-frequency = <400000>;
-
-	tps659038: tps659038@58 {
-		compatible = "ti,tps659038";
-		reg = <0x58>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps659038_pins_default>;
-
-		#interrupt-cells = <2>;
-		interrupt-controller;
-
-		ti,system-power-controller;
-
-		tps659038_pmic {
-			compatible = "ti,tps659038-pmic";
-
-			regulators {
-				smps12_reg: smps12 {
-					/* VDD_MPU */
-					regulator-name = "smps12";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_DDR */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps45_reg: smps45 {
-					/* VDD_DSPEVE, VDD_IVA, VDD_GPU */
-					regulator-name = "smps45";
-					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1150000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps6_reg: smps6 {
-					/* VDD_CORE */
-					regulator-name = "smps6";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1030000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS7 unused */
-
-				smps8_reg: smps8 {
-					/* VDD_1V8 */
-					regulator-name = "smps8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				/* SMPS9 unused */
-
-				ldo1_reg: ldo1 {
-					/* VDD_SD  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* VDD_SHV5 */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo9_reg: ldo9 {
-					/* VDD_RTC */
-					regulator-name = "ldo9";
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldoln_reg: ldoln {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldoln";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldousb_reg: ldousb {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldousb";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				regen1: regen1 {
-					/* VDD_3V3_ON */
-					regulator-name = "regen1";
-					regulator-boot-on;
-					regulator-always-on;
-				};
-			};
-		};
-
-		tps659038_rtc: tps659038_rtc {
-			compatible = "ti,palmas-rtc";
-			interrupt-parent = <&tps659038>;
-			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-		};
-
-		tps659038_pwr_button: tps659038_pwr_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps659038>;
-			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <12>;
-		};
-
-		tps659038_gpio: tps659038_gpio {
-			compatible = "ti,palmas-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-	};
-
-	tmp102: tmp102@48 {
-		compatible = "ti,tmp102";
-		reg = <0x48>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tmp102_pins_default>;
-		interrupt-parent = <&gpio7>;
-		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-		#thermal-sensor-cells = <1>;
-	};
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins_default>;
-	clock-frequency = <400000>;
-
-	mcp_rtc: rtc@6f {
-		compatible = "microchip,mcp7941x";
-		reg = <0x6f>;
-		interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>;  /* IRQ_SYS_1N */
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&mcp79410_pins_default>;
-
-		vcc-supply = <&vdd_3v3>;
-		wakeup-source;
-	};
 };
 
-&gpio7 {
-	ti,no-reset-on-init;
-	ti,no-idle-on-init;
-};
-
-&cpu0 {
-	cpu0-supply = <&smps12_reg>;
-	voltage-tolerance = <1>;
-};
-
-&uart3 {
-	status = "okay";
-	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3f8>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins_default>;
-};
-
-&mac {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_pins_default>;
-	pinctrl-1 = <&cpsw_pins_sleep>;
-	dual_emac;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_pins_default>;
-	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+&tpd12s015 {
+	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
+		<&gpio6 28 GPIO_ACTIVE_HIGH>,	/* gpio6_28, LS OE */
+		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
 };
 
 &mmc1 {
-	status = "okay";
-
-	pinctrl-names = "default";
+	pinctrl-names = "default", "hs";
 	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
 
 	vmmc-supply = <&ldo1_reg>;
-	vmmc_aux-supply = <&vdd_3v3>;
-	pbias-supply = <&pbias_mmc_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+	no-1-8-v;
 };
 
 &mmc2 {
-	status = "okay";
-
-	pinctrl-names = "default";
+	pinctrl-names = "default", "hs", "ddr_3_3v";
 	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&vdd_3v3>;
-	bus-width = <8>;
-	ti,non-removable;
-	cap-mmc-dual-data-rate;
-};
-
-&sata {
-	status = "okay";
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldousb_reg>;
-};
-
-&usb1 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb2 {
-	dr_mode = "peripheral";
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
 };
 
-&cpu_trips {
-	cpu_alert1: cpu_alert1 {
-		temperature = <50000>; /* millicelsius */
-		hysteresis = <2000>; /* millicelsius */
-		type = "active";
-	};
-};
-
-&cpu_cooling_maps {
-	map1 {
-		trip = <&cpu_alert1>;
-		cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-	};
-};
-
-&thermal_zones {
-	board_thermal: board_thermal {
-		polling-delay-passive = <1250>; /* milliseconds */
-		polling-delay = <1500>; /* milliseconds */
-
-				/* sensor       ID */
-		thermal-sensors = <&tmp102     0>;
-
-		board_trips: trips {
-			board_alert0: board_alert {
-				temperature = <40000>; /* millicelsius */
-				hysteresis = <2000>; /* millicelsius */
-				type = "active";
-			};
-
-			board_crit: board_crit {
-				temperature = <105000>; /* millicelsius */
-				hysteresis = <0>; /* millicelsius */
-				type = "critical";
-			};
-		};
-
-		board_cooling_maps: cooling-maps {
-			map0 {
-				trip = <&board_alert0>;
-				cooling-device =
-				  <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-			};
-		};
-       };
-};
-
-&dss {
-	status = "ok";
-
-	vdda_video-supply = <&ldoln_reg>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo3_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
+/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
+&phy1 {
+	max-speed = <100>;
 };
diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
new file mode 100644
index 000000000000..2fc9a5d5e0c0
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts
@@ -0,0 +1,628 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for CompuLab CL-SOM-AM57x System-on-Module
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "am5728.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x";
+	compatible = "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x20000000>; /* 512 MB - minimal configuration */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_pins_default>;
+
+		led0 {
+			label = "cl-som-am57x:green";
+			gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	vdd_3v3: fixedregulator-vdd_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ads7846reg: fixedregulator-ads7846-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "ads7846-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "CL-SOM-AM57x-Sound-Card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink0_master>;
+		simple-audio-card,frame-master = <&dailink0_master>;
+		simple-audio-card,widgets =
+					"Headphone", "Headphone Jack",
+					"Microphone", "Microphone Jack",
+					"Line", "Line Jack";
+		simple-audio-card,routing =
+					"Headphone Jack", "RHPOUT",
+					"Headphone Jack", "LHPOUT",
+					"LLINEIN", "Line Jack",
+					"MICIN", "Mic Bias",
+					"Mic Bias", "Microphone Jack";
+
+		dailink0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+			system-clock-frequency = <12000000>;
+		};
+	};
+};
+
+&dra7_pmx_core {
+	leds_pins_default: leds_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x347c, PIN_OUTPUT | MUX_MODE14)	/* gpmc_a15.gpio2_5 */
+		>;
+	};
+
+	i2c1_pins_default: i2c1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3800, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_sda.sda */
+			DRA7XX_CORE_IOPAD(0x3804, PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c1_scl.scl */
+		>;
+	};
+
+	i2c3_pins_default: i2c3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36a4, PIN_INPUT| MUX_MODE10)	/* mcasp1_aclkx.i2c3_sda */
+			DRA7XX_CORE_IOPAD(0x36a8, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsx.i2c3_scl */
+		>;
+	};
+
+	i2c4_pins_default: i2c4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36ac, PIN_INPUT| MUX_MODE10)	/* mcasp1_acl.i2c4_sda */
+			DRA7XX_CORE_IOPAD(0x36b0, PIN_INPUT| MUX_MODE10)	/* mcasp1_fsr.i2c4_scl */
+		>;
+	};
+
+	tps659038_pins_default: tps659038_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3818, PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	qspi1_pins: pinmux_qspi1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3474, PIN_INPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
+			DRA7XX_CORE_IOPAD(0x3480, PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d0 */
+			DRA7XX_CORE_IOPAD(0x3484, PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d1 */
+			DRA7XX_CORE_IOPAD(0x3488, PIN_INPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
+			DRA7XX_CORE_IOPAD(0x34b8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
+			DRA7XX_CORE_IOPAD(0x34bc, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs3.qspi1_cs1 */
+		>;
+	};
+
+	cpsw_pins_default: cpsw_pins_default {
+		pinctrl-single,pins = <
+			/* Slave at addr 0x0 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tclk */
+			DRA7XX_CORE_IOPAD(0x3654, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_tctl */
+			DRA7XX_CORE_IOPAD(0x3658, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3 */
+			DRA7XX_CORE_IOPAD(0x365c, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td2 */
+			DRA7XX_CORE_IOPAD(0x3660, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td1 */
+			DRA7XX_CORE_IOPAD(0x3664, PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td0 */
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rclk */
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rctl */
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd3 */
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd2 */
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd1 */
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rgmii0_rd0 */
+
+			/* Slave at addr 0x1 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_tclk */
+			DRA7XX_CORE_IOPAD(0x359c, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+		>;
+	};
+
+	cpsw_pins_sleep: cpsw_pins_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			DRA7XX_CORE_IOPAD(0x3650, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3654, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3658, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x365c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3660, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3664, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3668, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x366c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3670, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3674, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3678, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x367c, PIN_INPUT | MUX_MODE15)
+
+			/* Slave 2 */
+			DRA7XX_CORE_IOPAD(0x3598, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x359c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35a8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35ac, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b4, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35b8, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35bc, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c0, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x35c4, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	davinci_mdio_pins_default: davinci_mdio_pins_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			DRA7XX_CORE_IOPAD(0x3590, PIN_OUTPUT_PULLUP | MUX_MODE3)/* vin2a_d10.mdio_mclk */
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT_PULLUP | MUX_MODE3)	/* vin2a_d11.mdio_d */
+		>;
+	};
+
+	davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3590, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3594, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+
+	ads7846_pins: pinmux_ads7846_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3464, PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpmc_a9.gpio1_31 */
+		>;
+	};
+
+	mcasp3_pins_default: mcasp3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */
+			DRA7XX_CORE_IOPAD(0x372c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */
+		>;
+	};
+
+	mcasp3_pins_sleep: mcasp3_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3724, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3728, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x372c, PIN_INPUT | MUX_MODE15)
+			DRA7XX_CORE_IOPAD(0x3730, PIN_INPUT | MUX_MODE15)
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tps659038_pins_default>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1500000>;
+					regulator-max-microvolt = <1500000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* VDD_IVA */
+					regulator-name = "smps8";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps9_reg: smps9 {
+					/* PMIC_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+
+				ldo1_reg: ldo1 {
+					/* VDD_SD / VDDSHV8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDD_1V8 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDDA_1V8_PHYA - supplies VDDA_SATA, VDDA_USB1/2/3 */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDDA_1V8_PHYB - supplies VDDA_HDMI, VDDA_PCIE/0/1 */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1050000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* regen1 not used */
+			};
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	rtc0: rtc@56 {
+		compatible = "emmicro,em3027";
+		reg = <0x56>;
+	};
+
+	eeprom_module: atmel@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: wm8731@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+		status = "okay";
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&smps12_reg>;
+	voltage-tolerance = <1>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		status = "okay";
+	};
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+		status = "okay";
+	};
+};
+
+&mmc2 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+
+	vmmc-supply = <&vdd_3v3>;
+	bus-width = <8>;
+	ti,non-removable;
+	cap-mmc-dual-data-rate;
+};
+
+&qspi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&qspi1_pins>;
+
+	spi-max-frequency = <48000000>;
+
+	spi_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,m25p80", "jedec,spi-nor";
+		reg = <0>;				/* CS0 */
+		spi-max-frequency = <48000000>;
+
+		partition@0 {
+			label = "uboot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "uboot environment";
+			reg = <0xc0000 0x40000>;
+		};
+
+		partition@100000 {
+			label = "reserved";
+			reg = <0x100000 0x0>;
+		};
+	};
+
+	/* touch controller */
+	touchscreen@1 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ads7846_pins>;
+
+		compatible = "ti,ads7846";
+		vcc-supply = <&ads7846reg>;
+
+		reg = <1>;                              /* CS1 */
+		spi-max-frequency = <1500000>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <31 0>;
+		pendown-gpio = <&gpio1 31 0>;
+
+
+		ti,x-min = /bits/ 16 <0x0>;
+		ti,x-max = /bits/ 16 <0x0fff>;
+		ti,y-min = /bits/ 16 <0x0>;
+		ti,y-max = /bits/ 16 <0x0fff>;
+
+		ti,x-plate-ohms = /bits/ 16 <180>;
+		ti,pressure-max = /bits/ 16 <255>;
+
+		ti,debounce-max = /bits/ 16 <30>;
+		ti,debounce-tol = /bits/ 16 <10>;
+		ti,debounce-rep = /bits/ 16 <1>;
+
+		wakeup-source;
+	};
+};
+
+&mac_sw {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_pins_default>;
+	pinctrl-1 = <&cpsw_pins_sleep>;
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-txid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_pins_default>;
+	pinctrl-1 = <&davinci_mdio_pins_sleep>;
+
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&usb2 {
+	dr_mode = "host";
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mcasp3_pins_default>;
+	pinctrl-1 = <&mcasp3_pins_sleep>;
+	status = "okay";
+
+	op-mode = <0>;	/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializers */
+	serial-dir = <	/* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+};
+
+&gpio3_target {
+	ti,no-reset-on-init;
+};
+
+&gpio2_target {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&pruss1_mdio {
+	status = "disabled";
+};
+
+&pruss2_mdio {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/am57xx-commercial-grade.dtsi b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
new file mode 100644
index 000000000000..3eed6e09c884
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-commercial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+	temperature = <80000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <90000>; /* milliCelsius */
+};
diff --git a/arch/arm/boot/dts/am57xx-evm.dtso b/arch/arm/boot/dts/am57xx-evm.dtso
new file mode 100644
index 000000000000..12385a31061e
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-evm.dtso
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DT overlay for AM57xx GP EVM boards
+ *
+ * Copyright (C) 2020-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+&{/} {
+	compatible = "ti,am5728-evm", "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+	model = "TI AM5728 EVM";
+
+	aliases {
+		display0 = "/display";
+		display1 = "/connector"; // Fixme: &lcd0 and &hdmi0 could be
+					 // resolved here correcly based on
+					 // information in the base dtb symbol
+					 // table with a fix in dtc
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-user1 {
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			label = "USER1";
+			linux,code = <BTN_1>;
+		};
+
+		button-user2 {
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+			label = "USER2";
+			linux,code = <BTN_2>;
+		};
+
+		button-user3 {
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			label = "USER3";
+			linux,code = <BTN_3>;
+		};
+
+		button-user4 {
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			label = "USER4";
+			linux,code = <BTN_4>;
+		};
+
+		button-user5 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+			label = "USER5";
+			linux,code = <BTN_5>;
+		};
+	};
+
+	lcd0: display {
+		compatible = "osddisplays,osd070t1718-19ts", "panel-dpi";
+		backlight = <&lcd_bl>;
+		enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		label = "lcd";
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 243 245 247 249 251 252 253 255>;
+		default-brightness-level = <8>;
+		pwms = <&ehrpwm1 0 50000 0>;
+	};
+};
+
+&ehrpwm1 {
+	status = "okay";
+};
+
+&epwmss1 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		attb-gpio = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		reg = <0x5c>;
+		reset-gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&dss {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				data-lines = <24>;
+				remote-endpoint = <&lcd_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
new file mode 100644
index 000000000000..7f092a8811e8
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -0,0 +1,608 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "am57xx-industrial-grade.dtsi"
+
+/ {
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	vmain: fixedregulator-vmain {
+		compatible = "regulator-fixed";
+		regulator-name = "VMAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v3_3d: fixedregulator-v3_3d {
+		compatible = "regulator-fixed";
+		regulator-name = "V3_3D";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	v1_2d: fixedregulator-v1_2d {
+		compatible = "regulator-fixed";
+		regulator-name = "V1_2D";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&v3_3d>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds-iio {
+		status = "disabled";
+		compatible = "gpio-leds";
+		led-out0 {
+			label = "out0";
+			gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out1 {
+			label = "out1";
+			gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out2 {
+			label = "out2";
+			gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out3 {
+			label = "out3";
+			gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out4 {
+			label = "out4";
+			gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out5 {
+			label = "out5";
+			gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out6 {
+			label = "out6";
+			gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-out7 {
+			label = "out7";
+			gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	hdmi0: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder@0 {
+		compatible = "ti,tpd12s016", "ti,tpd12s015";
+
+		gpios = <0>, /* optional CT_CP_HPD */
+			<0>, /* optional LS_OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	src_clk_x1: src_clk_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+};
+
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0)	/* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0)		/* dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP)	/* dcan1_rx.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x418>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vmain>;
+			smps3-in-supply = <&vmain>;
+			smps45-in-supply = <&vmain>;
+			smps6-in-supply = <&vmain>;
+			smps7-in-supply = <&vmain>;
+			smps8-in-supply = <&vmain>;
+			smps9-in-supply = <&vmain>;
+			ldo1-in-supply = <&vmain>;
+			ldo2-in-supply = <&vmain>;
+			ldo3-in-supply = <&vmain>;
+			ldo4-in-supply = <&vmain>;
+			ldo9-in-supply = <&vmain>;
+			ldoln-in-supply = <&vmain>;
+			ldousb-in-supply = <&vmain>;
+			ldortc-in-supply = <&vmain>;
+
+			regulators {
+				smps12_reg: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps45_reg: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					/* VDD_IVA + VDD_DSP on AM571 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps6_reg: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps7_reg: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps8_reg: smps8 {
+					/* 5728 - VDD_IVAHD */
+					/* 5718 - N.C. test point */
+					regulator-name = "smps8";
+				};
+
+				smps9_reg: smps9 {
+					/* VDD_3_3D */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					/* NOTE: on rev 1.3a, data supply */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo2_reg: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				ldo9_reg: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = <840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldoln_reg: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		extcon_usb2: tps659038_usb {
+			compatible = "ti,palmas-usb-vid";
+			ti,enable-vbus-detection;
+			ti,enable-id-detection;
+			/* ID & VBUS GPIOs provided in board dts */
+		};
+	};
+
+	tpic2810: tpic2810@60 {
+		compatible = "ti,tpic2810";
+		reg = <0x60>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	dsi_bridge: tc358778@e {
+		compatible = "toshiba,tc358778", "toshiba,tc358768";
+		reg = <0xe>;
+		status = "disabled";
+
+		clocks = <&src_clk_x1>;
+		clock-names = "refclk";
+
+		vddc-supply = <&v1_2d>;
+		vddmipi-supply = <&v1_2d>;
+		vddio-supply = <&v3_3d>;
+
+		dsi_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				rgb_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+					data-lines = <24>;
+				};
+			};
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
+			       &dra7_pmx_core 0x248>;
+};
+
+&rtc {
+	status = "okay";
+	ext-clk-src;
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	dr_mode = "host";
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	extcon = <&extcon_usb2>;
+	dr_mode = "otg";
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vqmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+	no-1-8-v;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vqmmc-supply = <&v3_3d>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <96000000>;
+	no-1-8-v;
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	flash@0 {
+		compatible = "s25fl256s1", "jedec,spi-nor";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@2 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@3 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@5 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@6 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&smps12_reg>;
+};
+
+&hdmi {
+	status = "okay";
+
+	vdda-supply = <&ldo4_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				remote-endpoint = <&rgb_in>;
+				data-lines = <24>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
new file mode 100644
index 000000000000..25d74e9f3c9e
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2045.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2045-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
new file mode 100644
index 000000000000..8cea7ba32487
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-idk-lcd-osd101t2587.dtso
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019-2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&{/} {
+	aliases {
+		display0 = "/display";
+		display1 = "/connector";
+	};
+
+	lcd_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 1>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+};
+
+&dsi_bridge {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	lcd: display {
+		compatible = "osddisplays,osd101t2587-53ts";
+		reg = <0>;
+
+		label = "lcd";
+
+		backlight = <&lcd_bl>;
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_bridge_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@1 {
+		reg = <1>;
+		dsi_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&ecap0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/am57xx-industrial-grade.dtsi b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
new file mode 100644
index 000000000000..422f953fc8d8
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-industrial-grade.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0
+&cpu_alert0 {
+	temperature = <90000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <105000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <105000>; /* milliCelsius */
+};
diff --git a/arch/arm/boot/dts/am57xx-sbc-am57x.dts b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
new file mode 100644
index 000000000000..beef63e8a005
--- /dev/null
+++ b/arch/arm/boot/dts/am57xx-sbc-am57x.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for CompuLab SBC-AM57x single board computer
+ *
+ * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
+ * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
+ */
+
+#include "am57xx-cl-som-am57x.dts"
+#include "compulab-sb-som.dtsi"
+
+/ {
+	model = "CompuLab CL-SOM-AM57x on SB-SOM-AM57x";
+	compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		display0 = &lcd0;
+		display1 = &hdmi;
+	};
+};
+
+&dra7_pmx_core {
+	uart3_pins_default: uart3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3648, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_rxd */
+			DRA7XX_CORE_IOPAD(0x364c, PIN_INPUT_SLEW | MUX_MODE0)	/* uart3_txd */
+		>;
+	};
+
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+			DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdcd.gpio6_27 */
+			DRA7XX_CORE_IOPAD(0x377c, PIN_INPUT | MUX_MODE14)	/* mmc1_sdwp.gpio6_28 */
+		>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3680, PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+		>;
+	};
+
+	i2c5_pins_default: i2c5_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x36b4, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr0.i2c5_sda */
+			DRA7XX_CORE_IOPAD(0x36b8, PIN_INPUT| MUX_MODE10)	/* mcasp1_axr1.i2c5_scl */
+		>;
+	};
+
+	lcd_pins_default: lcd_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3564, PIN_OUTPUT | MUX_MODE14)      /* vin2a_vsync0.gpio4_0 */
+		>;
+	};
+
+	hdmi_pins: pinmux_hdmi_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3808, PIN_INPUT | MUX_MODE1)	/* i2c2_sda.hdmi1_ddc_scl */
+			DRA7XX_CORE_IOPAD(0x380c, PIN_INPUT | MUX_MODE1)	/* i2c2_scl.hdmi1_ddc_sda */
+		>;
+	};
+
+	hdmi_conn_pins: pinmux_hdmi_conn_pins {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37b8, PIN_INPUT | MUX_MODE14)	/* spi1_cs2.gpio7_12 */
+		>;
+	};
+};
+
+&uart3 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3f8>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+
+	vmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 28 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+};
+
+&i2c5 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_default>;
+	clock-frequency = <400000>;
+
+	eeprom_base: atmel@54 {
+		compatible = "atmel,24c08";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+
+	pca9555: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&dss {
+	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	port {
+		dpi_lcd_out: endpoint {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&lcd0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins_default>;
+
+	enable-gpios = <&pca9555 14 GPIO_ACTIVE_HIGH
+			&gpio4 0 GPIO_ACTIVE_HIGH>;
+
+	port {
+		lcd_in: endpoint {
+			remote-endpoint = <&dpi_lcd_out>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&ldo4_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_connector_in>;
+			lanes = <1 0 3 2 5 4 7 6>;
+		};
+	};
+};
+
+&hdmi_conn {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_conn_pins>;
+
+	hpd-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+	port {
+		hdmi_connector_in: endpoint {
+			remote-endpoint = <&hdmi_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts
index 4e0ad3b82796..29936bfbeeb7 100644
--- a/arch/arm/boot/dts/animeo_ip.dts
+++ b/arch/arm/boot/dts/animeo_ip.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
  */
 
 /dts-v1/;
@@ -24,23 +23,14 @@
 	};
 
 	chosen {
-		linux,stdout-path = &usart2;
+		stdout-path = &usart2;
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -52,6 +42,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart0: serial@fffb0000 {
 				pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts>;
 				linux,rs485-enabled-at-boot-time;
@@ -79,6 +81,7 @@
 				pinctrl-0 = <&pinctrl_mmc0_clk
 					     &pinctrl_mmc0_slot1_cmd_dat0
 					     &pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				slot@1 {
@@ -92,29 +95,48 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
 
-			barebox@0 {
-				label = "barebox";
-				reg = <0x0 0x58000>;
-			};
-
-			u_boot_env@58000 {
-				label = "u_boot_env";
-				reg = <0x58000 0x8000>;
-			};
-
-			ubi@60000 {
-				label = "ubi";
-				reg = <0x60000 0x1FA0000>;
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						barebox@0 {
+							label = "barebox";
+							reg = <0x0 0x58000>;
+						};
+
+						u_boot_env@58000 {
+							label = "u_boot_env";
+							reg = <0x58000 0x8000>;
+						};
+
+						ubi@60000 {
+							label = "ubi";
+							reg = <0x60000 0x1FA0000>;
+						};
+					};
+				};
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioB 15 GPIO_ACTIVE_LOW>;
 			status = "okay";
@@ -146,30 +168,28 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		keyswitch_in {
+		key-switch-in {
 			label = "keyswitch_in";
 			gpios = <&pioB 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		error_in {
+		key-error-in {
 			label = "error_in";
 			gpios = <&pioB 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <29>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		btn {
+		key-s {
 			label = "btn";
 			gpios = <&pioC 23 GPIO_ACTIVE_HIGH>;
 			linux,code = <31>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
new file mode 100644
index 000000000000..e18769df9fd9
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd-ctrevb.dts
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp-ctrevb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/*
+ * This is the EB with the new Revision D baseboard with SMSC9118 ethernet and
+ * the Rev B core tile.
+ */
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Core Tile Rev B";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
new file mode 100644
index 000000000000..26b1c69e9f43
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D with ARM11MPCore Rev C Core Tile";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
new file mode 100644
index 000000000000..e68527b0d552
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp-ctrevb.dts
@@ -0,0 +1,93 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-11mp.dts"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev B";
+};
+
+/*
+ * The revision B has a distinctly different layout of the syscon, so
+ * append a specific compatible-string.
+ */
+&syscon {
+	compatible = "arm,realview-eb11mp-revb-syscon", "arm,realview-eb-syscon", "syscon", "simple-mfd";
+};
+
+&intc {
+	reg = <0x10101000 0x1000>,
+	      <0x10100100 0x100>;
+};
+
+&L2 {
+	reg = <0x10102000 0x1000>;
+};
+
+&scu {
+	reg = <0x10100000 0x100>;
+};
+
+&twd_timer {
+	reg = <0x10100600 0x20>;
+};
+
+&twd_wdog {
+	reg = <0x10100620 0x20>;
+};
+
+/*
+ * On revision B, we cannot reach the secondary interrupt
+ * controller, as a result, some peripherals that are dependent
+ * on their IRQ cannot be reached, so disable them.
+ */
+&intc_second {
+	status = "disabled";
+};
+
+&gpio0 {
+	status = "disabled";
+};
+
+&gpio1 {
+	status = "disabled";
+};
+
+&gpio2 {
+	status = "disabled";
+};
+
+&serial2 {
+	status = "disabled";
+};
+
+&serial3 {
+	status = "disabled";
+};
+
+&ssp {
+	status = "disabled";
+};
+
+&wdog {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-11mp.dts b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
new file mode 100644
index 000000000000..aac1edd4b227
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-11mp.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard with ARM11MPCore Rev C Core Tile";
+	arm,hbi = <0x146>;
+
+	/*
+	 * This is the ARM11 MPCore tile (HBI-0146) used with the RealView EB.
+	 * Reference: ARM DUI 0318F
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb-mpcore -smp cpus=4
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
new file mode 100644
index 000000000000..42efac7496ef
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp-bbrevd.dts
@@ -0,0 +1,28 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "arm-realview-eb-a9mp.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView EB Baseboard Rev D Cortex A9 MPCore";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-a9mp.dts b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
new file mode 100644
index 000000000000..967684b3636c
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-a9mp.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-eb-mp.dtsi"
+
+/ {
+	model = "ARM RealView EB Cortex A9 MPCore";
+
+	/*
+	 * This is the Cortex A9 MPCore tile used with the
+	 * RealView EB.
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		A9_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		A9_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+};
+
+&pmu {
+	interrupt-affinity = <&A9_0>, <&A9_1>, <&A9_2>, <&A9_3>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
new file mode 100644
index 000000000000..f533c8b49d97
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dts
@@ -0,0 +1,29 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* This derives from the Realview Baseboard, and overlays the new ethernet */
+#include "arm-realview-eb.dts"
+#include "arm-realview-eb-bbrevd.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard Rev D";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
new file mode 100644
index 000000000000..a79e1d1d30a7
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-bbrevd.dtsi
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/ {
+	/* Introduce a fixed regulator for the new ethernet controller */
+	veth: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+};
+
+/*
+ * The revision D has a different ethernet controller that the elder boards:
+ * the older board uses LAN91C111 but the new one uses LAN9118.
+ */
+&ethernet {
+	compatible = "smsc,lan9118", "smsc,lan9115";
+	phy-mode = "mii";
+	smsc,irq-active-high;
+	smsc,irq-push-pull;
+	vdd33a-supply = <&veth>;
+	vddvario-supply = <&veth>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb-mp.dtsi b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
new file mode 100644
index 000000000000..26783d053ac7
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb-mp.dtsi
@@ -0,0 +1,220 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/*
+ * This is the common include file for all MPCore variants of the
+ * Evaluation Baseboard, i.e. ARM11MPCore, ARM11MPCore Revision B
+ * and Cortex-A9 MPCore.
+ */
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		/* Primary interrupt controller in the test chip */
+		intc: interrupt-controller@1f000100 {
+			compatible = "arm,eb11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1f001000 0x1000>,
+			      <0x1f000100 0x100>;
+		};
+
+		/* Secondary interrupt controller on the FPGA */
+		intc_second: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		L2: cache-controller {
+			compatible = "arm,l220-cache";
+			reg = <0x1f002000 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+			cache-unified;
+			cache-level = <2>;
+			/*
+			 * Override default cache size, sets and
+			 * associativity as these may be erroneously set
+			 * up by boot loader(s), probably for safety
+			 * since th outer sync operation can cause the
+			 * cache to hang unless disabled.
+			 */
+			cache-size = <1048576>; // 1MB
+			cache-sets = <4096>;
+			cache-line-size = <32>;
+			arm,shared-override;
+			arm,parity-enable;
+			arm,outer-sync-disable;
+		};
+
+		scu: scu@1f000000 {
+			compatible = "arm,arm11mp-scu";
+			reg = <0x1f000000 0x100>;
+		};
+
+		twd_timer: timer@1f000600 {
+			compatible = "arm,arm11mp-twd-timer";
+			reg = <0x1f000600 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 13 0xf04>;
+		};
+
+		twd_wdog: watchdog@1f000620 {
+			compatible = "arm,arm11mp-twd-wdt";
+			reg = <0x1f000620 0x20>;
+			interrupt-parent = <&intc>;
+			interrupts = <1 14 0xf04>;
+		};
+
+		/* PMU with one IRQ line per core */
+		pmu: pmu@0 {
+			compatible = "arm,arm11mpcore-pmu";
+			interrupt-parent = <&intc>;
+			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+			<0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/*
+ * On revision A, these peripherals does not have their IRQ lines
+ * routed to the core tile, but they can be reached on the secondary
+ * GIC.
+ */
+&gpio0 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&serial3 {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&ssp {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
+
+&wdog {
+	interrupt-parent = <&intc_second>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dts b/arch/arm/boot/dts/arm-realview-eb.dts
new file mode 100644
index 000000000000..15431077f00c
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dts
@@ -0,0 +1,166 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "arm-realview-eb.dtsi"
+
+/ {
+	model = "ARM RealView Emulation Baseboard";
+	compatible = "arm,realview-eb";
+	arm,hbi = <0x140>;
+
+	/*
+	 * This is the core tile with the CPU and GIC etc for the
+	 * ARM926EJ-S, ARM1136, ARM1176 that does not have L2 cache
+	 * or PMU.
+	 *
+	 * To run this machine with QEMU, specify the following:
+	 * qemu-system-arm -M realview-eb
+	 * Unless specified, QEMU will emulate an ARM926EJ-S core tile.
+	 * Switches -cpu arm1136 or -cpu arm1176 emulates the other
+	 * core tiles.
+	 */
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-eb-soc", "simple-bus";
+		regmap = <&syscon>;
+		ranges;
+
+		intc: interrupt-controller@10040000 {
+			compatible = "arm,pl390";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x10041000 0x1000>,
+			      <0x10040000 0x100>;
+		};
+	};
+};
+
+/*
+ * This adapts all the peripherals to the interrupt routing
+ * to the GIC on the core tile.
+ */
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			<0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&charlcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm-realview-eb.dtsi
new file mode 100644
index 000000000000..fbb2258b451f
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-eb.dtsi
@@ -0,0 +1,484 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-eb";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC LAN91C111 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan91c111";
+		reg = <0x4e000000 0x10000>;
+		/*
+		 * This means the adapter can be accessed with 8, 16 or
+		 * 32 bit reads/writes.
+		 */
+		reg-io-width = <7>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		i2c: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		charlcd: fpga_charlcd: charlcd@10008000 {
+			compatible = "arm,versatile-lcd";
+			reg = <0x10008000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		wdog: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer1", "timer2", "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm-realview-pb1176.dts
index 1bc64cda819e..efed325af88d 100644
--- a/arch/arm/boot/dts/arm-realview-pb1176.dts
+++ b/arch/arm/boot/dts/arm-realview-pb1176.dts
@@ -23,9 +23,10 @@
 /dts-v1/;
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "ARM RealView PB1176";
 	compatible = "arm,realview-pb1176";
 
@@ -40,12 +41,13 @@
 	};
 
 	memory {
+		device_type = "memory";
 		/* 128 MiB memory @ 0x0 */
 		reg = <0x00000000 0x08000000>;
 	};
 
 	/* The voltage to the MMC card is hardwired at 3.3V */
-	vmmc: fixedregulator@0 {
+	vmmc: regulator-vmmc {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmc";
 		regulator-min-microvolt = <3300000>;
@@ -53,6 +55,14 @@
 		regulator-boot-on;
         };
 
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
 	xtal24mhz: xtal24mhz@24M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -106,6 +116,96 @@
 		clock-frequency = <0>;
 	};
 
+	flash@30000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x30000000 0x4000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	fpga_flash@38000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x38000000 0x800000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/*
+	 * The "secure flash" contains things like the boot
+	 * monitor so we don't want people to accidentally
+	 * screw this up. Mark the device tree node disabled
+	 * by default.
+	 */
+	secflash@3c000000 {
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x3c000000 0x4000000>;
+		bank-width = <4>;
+		status = "disabled";
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet@3a000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x3a000000 0x10000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb@3b000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x3b000000 0x20000>;
+		interrupt-parent = <&intc_fpga1176>;
+		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -116,66 +216,117 @@
 		syscon: syscon@10000000 {
 			compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
 			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-			led@08.0 {
+			led@8,0 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x01>;
 				label = "versatile:0";
 				linux,default-trigger = "heartbeat";
 				default-state = "on";
 			};
-			led@08.1 {
+			led@8,1 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x02>;
 				label = "versatile:1";
 				linux,default-trigger = "mmc0";
 				default-state = "off";
 			};
-			led@08.2 {
+			led@8,2 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x04>;
 				label = "versatile:2";
 				linux,default-trigger = "cpu0";
 				default-state = "off";
 			};
-			led@08.3 {
+			led@8,3 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x08>;
 				label = "versatile:3";
 				default-state = "off";
 			};
-			led@08.4 {
+			led@8,4 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x10>;
 				label = "versatile:4";
 				default-state = "off";
 			};
-			led@08.5 {
+			led@8,5 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x20>;
 				label = "versatile:5";
 				default-state = "off";
 			};
-			led@08.6 {
+			led@8,6 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x40>;
 				label = "versatile:6";
 				default-state = "off";
 			};
-			led@08.7 {
+			led@8,7 {
 				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
 				offset = <0x08>;
 				mask = <0x80>;
 				label = "versatile:7";
 				default-state = "off";
 			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
 		};
 
 		/* Primary DevChip GIC synthesized with the CPU */
@@ -188,7 +339,7 @@
 			      <0x10120000 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,l220-cache";
 			reg = <0x10110000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
@@ -253,13 +404,13 @@
 			clock-names = "apb_pclk";
 		};
 
-		pb1176_ssp: ssp@1010b000 {
+		pb1176_ssp: spi@1010b000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x1010b000 0x1000>;
 			interrupt-parent = <&intc_dc1176>;
 			interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&sspclk>, <&pclk>;
-			clock-names = "SSPCLK", "apb_pclk";
+			clock-names = "sspclk", "apb_pclk";
 		};
 
 		pb1176_serial0: serial@1010c000 {
@@ -297,6 +448,32 @@
 			clocks = <&uartclk>, <&pclk>;
 			clock-names = "uartclk", "apb_pclk";
 		};
+
+		/* Direct-mapped development chip ROM */
+		pb1176_rom@10200000 {
+			compatible = "direct-mapped";
+			reg = <0x10200000 0x4000>;
+			bank-width = <1>;
+		};
+
+		clcd@10112000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10112000 0x1000>;
+			interrupt-parent = <&intc_dc1176>;
+			interrupt-names = "combined";
+			interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk0>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
 	};
 
 	/* These peripherals are inside the FPGA rather than the DevChip */
@@ -306,6 +483,27 @@
 		compatible = "simple-bus";
 		ranges;
 
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		fpga_aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_fpga1176>;
+			interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
 		fpga_mci: mmcsd@10005000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			reg = <0x10005000 0x1000>;
@@ -406,7 +604,5 @@
 			clocks = <&pclk>;
 			clock-names = "apb_pclk";
 		};
-
-
 	};
 };
diff --git a/arch/arm/boot/dts/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm-realview-pb11mp.dts
new file mode 100644
index 000000000000..89103d54ecc1
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pb11mp.dts
@@ -0,0 +1,736 @@
+/*
+ * Copyright 2015 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "ARM RealView PB11MPcore";
+	compatible = "arm,realview-pb11mp";
+
+	chosen { };
+
+	aliases {
+		serial0 = &pb11mp_serial0;
+		serial1 = &pb11mp_serial1;
+		serial2 = &pb11mp_serial2;
+		serial3 = &pb11mp_serial3;
+	};
+
+	memory {
+		device_type = "memory";
+		/*
+		 * The PB11MPCore has 512 MiB memory @ 0x70000000
+		 * and the first 256 are also remapped @ 0x00000000
+		 */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		MP11_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <2>;
+			next-level-cache = <&L2>;
+		};
+
+		MP11_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,arm11mpcore";
+			reg = <3>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	/* Primary TestChip GIC synthesized with the CPU */
+	intc_tc11mp: interrupt-controller@1f000100 {
+		compatible = "arm,tc11mp-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+
+	L2: cache-controller {
+		compatible = "arm,l220-cache";
+		reg = <0x1f002000 0x1000>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 31 IRQ_TYPE_LEVEL_HIGH>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s), probably for safety
+		 * since th outer sync operation can cause the
+		 * cache to hang unless disabled.
+		 */
+		cache-size = <1048576>; // 1MB
+		cache-sets = <4096>;
+		cache-line-size = <32>;
+		arm,shared-override;
+		arm,parity-enable;
+		arm,outer-sync-disable;
+	};
+
+	scu@1f000000 {
+		compatible = "arm,arm11mp-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	timer@1f000600 {
+		compatible = "arm,arm11mp-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	watchdog@1f000620 {
+		compatible = "arm,arm11mp-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	/* PMU with one IRQ line per core */
+	pmu {
+		compatible = "arm,arm11mpcore-pmu";
+		interrupt-parent = <&intc_tc11mp>;
+		interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&MP11_0>, <&MP11_1>, <&MP11_2>, <&MP11_3>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		// 2 * 32MiB NOR Flash memory
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "arm,realview-pb11mp-soc", "simple-bus";
+		regmap = <&pb11mp_syscon>;
+		ranges;
+
+		pb11mp_syscon: syscon@10000000 {
+			compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				linux,default-trigger = "cpu1";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				linux,default-trigger = "cpu2";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				linux,default-trigger = "cpu3";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk5: clock-controller@d4 {
+				compatible = "arm,syscon-icst307";
+				reg = <0xd4 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd4>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk6: clock-controller@d8 {
+				compatible = "arm,syscon-icst307";
+				reg = <0xd8 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0xd8>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon 0>,
+					  <&sp810_syscon 1>,
+					  <&sp810_syscon 2>,
+					  <&sp810_syscon 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mci: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>,
+					<0 15 IRQ_TYPE_LEVEL_HIGH>;
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		pb11mp_serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		pb11mp_serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 0>,
+			         <&sp810_syscon 1>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
+			arm,sp804-has-irq = <1>;
+			clocks = <&sp810_syscon 2>,
+			         <&sp810_syscon 3>,
+				 <&pclk>;
+			clock-names = "timer0clk",
+				    "timer1clk",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
+			status = "disabled";
+		};
+
+
+		clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-parent = <&intc_pb11mp>;
+			interrupt-names = "combined";
+			interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+
+		/*
+		 * This GIC on the Platform Baseboard is cascaded off the
+		 * TestChip GIC
+		 */
+		intc_pb11mp: interrupt-controller@1e000000 {
+			compatible = "arm,arm11mp-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			interrupt-controller;
+			reg = <0x1e001000 0x1000>,
+			      <0x1e000000 0x100>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		/* SMSC 9118 ethernet with PHY and EEPROM */
+		ethernet@4e000000 {
+			compatible = "smsc,lan9118", "smsc,lan9115";
+			reg = <0x4e000000 0x10000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+			phy-mode = "mii";
+			reg-io-width = <4>;
+			smsc,irq-active-high;
+			smsc,irq-push-pull;
+			vdd33a-supply = <&veth>;
+			vddvario-supply = <&veth>;
+		};
+
+		usb@4f000000 {
+			compatible = "nxp,usb-isp1761";
+			reg = <0x4f000000 0x20000>;
+			interrupt-parent = <&intc_tc11mp>;
+			interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+			dr_mode = "peripheral";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/arm-realview-pba8.dts b/arch/arm/boot/dts/arm-realview-pba8.dts
new file mode 100644
index 000000000000..d3238c252b59
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pba8.dts
@@ -0,0 +1,178 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	model = "ARM RealView Platform Baseboard for Cortex-A8";
+	compatible = "arm,realview-pba8";
+	arm,hbi = <0x178>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0>;
+		};
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1e000000 {
+		compatible = "arm,pl390";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1e001000 0x1000>,
+		      <0x1e000000 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&soc {
+	compatible = "arm,realview-pba8-soc", "simple-bus";
+};
+
+&syscon {
+	compatible = "arm,realview-pba8-syscon", "syscon", "simple-mfd";
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pbx-a9.dts b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
new file mode 100644
index 000000000000..85d3968fbb91
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pbx-a9.dts
@@ -0,0 +1,228 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "arm-realview-pbx.dtsi"
+
+/ {
+	/*
+	 * This is the RealView Platform Baseboard Explore for Cortex-A9
+	 * (HBI0182 + HBI0183) as described in ARM DUI 0440B
+	 */
+	model = "ARM RealView Platform Baseboard Explore for Cortex-A9";
+	arm,hbi = <0x182>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "arm,realview-smp";
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&CPU0>;
+				};
+				core1 {
+					cpu = <&CPU1>;
+				};
+			};
+		};
+		CPU0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+		CPU1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	L2: cache-controller {
+		compatible = "arm,pl310-cache";
+		reg = <0x1f002000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+		/*
+		 * Override default cache size, sets and
+		 * associativity as these may be erroneously set
+		 * up by boot loader(s).
+		 */
+		cache-size = <131072>; // 128KB
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		arm,parity-disable;
+		arm,tag-latency = <1 1 1>;
+		arm,data-latency = <1 1 1>;
+	};
+
+	scu: scu@1f000000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0x1f000000 0x100>;
+	};
+
+	twd_timer: timer@1f000600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0x1f000600 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 13 0xf04>;
+	};
+
+	twd_wdog: watchdog@1f000620 {
+		compatible = "arm,cortex-a9-twd-wdt";
+		reg = <0x1f000620 0x20>;
+		interrupt-parent = <&intc>;
+		interrupts = <1 14 0xf04>;
+	};
+
+	pmu: pmu@0 {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&intc>;
+		interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <0 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CPU0>, <&CPU1>;
+	};
+
+	/* Primary GIC PL390 interrupt controller in the test chip */
+	intc: interrupt-controller@1f000000 {
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		interrupt-controller;
+		reg = <0x1f001000 0x1000>,
+		      <0x1f000100 0x100>;
+	};
+};
+
+&ethernet {
+	interrupt-parent = <&intc>;
+	interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupt-parent = <&intc>;
+	interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&serial3 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ssp {
+	interrupt-parent = <&intc>;
+	interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&wdog1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer01 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer23 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&rtc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer45 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&timer67 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&aaci {
+	interrupt-parent = <&intc>;
+	interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mmc {
+	interrupt-parent = <&intc>;
+	interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+		     <0 18 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi0 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&kmi1 {
+	interrupt-parent = <&intc>;
+	interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&clcd {
+	interrupt-parent = <&intc>;
+	interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm-realview-pbx.dtsi
new file mode 100644
index 000000000000..ec1507c5147c
--- /dev/null
+++ b/arch/arm/boot/dts/arm-realview-pbx.dtsi
@@ -0,0 +1,593 @@
+/*
+ * Copyright 2016 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "arm,realview-pbx";
+
+	chosen { };
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		serial3 = &serial3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	memory {
+		device_type = "memory";
+		/* 128 MiB memory @ 0x0 */
+		reg = <0x00000000 0x08000000>;
+	};
+
+	/* The voltage to the MMC card is hardwired at 3.3V */
+	vmmc: regulator-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+        };
+
+	veth: regulator-veth {
+		compatible = "regulator-fixed";
+		regulator-name = "veth";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+	};
+
+	xtal24mhz: xtal24mhz@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	refclk32khz: refclk32khz {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timclk: timclk@1M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <24>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	mclk: mclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	kmiclk: kmiclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	sspclk: sspclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	uartclk: uartclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	wdogclk: wdogclk@24M {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-div = <1>;
+		clock-mult = <1>;
+		clocks = <&xtal24mhz>;
+	};
+
+	/* FIXME: this actually hangs off the PLL clocks */
+	pclk: pclk@0 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	flash0@40000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x40000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	flash1@44000000 {
+		/* 2 * 32MiB NOR Flash memory */
+		compatible = "arm,versatile-flash", "cfi-flash";
+		reg = <0x44000000 0x04000000>;
+		bank-width = <4>;
+		partitions {
+			compatible = "arm,arm-firmware-suite";
+		};
+	};
+
+	/* SMSC 9118 ethernet with PHY and EEPROM */
+	ethernet: ethernet@4e000000 {
+		compatible = "smsc,lan9118", "smsc,lan9115";
+		reg = <0x4e000000 0x10000>;
+		phy-mode = "mii";
+		reg-io-width = <4>;
+		smsc,irq-active-high;
+		smsc,irq-push-pull;
+		vdd33a-supply = <&veth>;
+		vddvario-supply = <&veth>;
+	};
+
+	usb: usb@4f000000 {
+		compatible = "nxp,usb-isp1761";
+		reg = <0x4f000000 0x20000>;
+		dr_mode = "peripheral";
+	};
+
+	bridge {
+		compatible = "ti,ths8134a", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		/*
+		 * This DDC I2C is connected directly to the DVI portions
+		 * of the connector, so it's not really working when the
+		 * monitor is connected to the VGA connector.
+		 */
+		compatible = "vga-connector";
+		ddc-i2c-bus = <&i2c1>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	soc: soc {
+		compatible = "arm,realview-pbx-soc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		regmap = <&syscon>;
+		ranges;
+
+		syscon: syscon@10000000 {
+			compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
+			reg = <0x10000000 0x1000>;
+			ranges = <0x0 0x10000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			led@8,0 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x01>;
+				label = "versatile:0";
+				linux,default-trigger = "heartbeat";
+				default-state = "on";
+			};
+			led@8,1 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x02>;
+				label = "versatile:1";
+				linux,default-trigger = "mmc0";
+				default-state = "off";
+			};
+			led@8,2 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x04>;
+				label = "versatile:2";
+				linux,default-trigger = "cpu0";
+				default-state = "off";
+			};
+			led@8,3 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x08>;
+				label = "versatile:3";
+				default-state = "off";
+			};
+			led@8,4 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x10>;
+				label = "versatile:4";
+				default-state = "off";
+			};
+			led@8,5 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x20>;
+				label = "versatile:5";
+				default-state = "off";
+			};
+			led@8,6 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x40>;
+				label = "versatile:6";
+				default-state = "off";
+			};
+			led@8,7 {
+				compatible = "register-bit-led";
+				reg = <0x08 0x04>;
+				offset = <0x08>;
+				mask = <0x80>;
+				label = "versatile:7";
+				default-state = "off";
+			};
+			oscclk0: clock-controller@c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x0c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x0C>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk1: clock-controller@10 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x10 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x10>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk2: clock-controller@14 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x14 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x14>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk3: clock-controller@18 {
+				compatible = "arm,syscon-icst307";
+				reg = <0x18 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x18>;
+				clocks = <&xtal24mhz>;
+			};
+			oscclk4: clock-controller@1c {
+				compatible = "arm,syscon-icst307";
+				reg = <0x1c 0x04>;
+				#clock-cells = <0>;
+				lock-offset = <0x20>;
+				vco-offset = <0x1c>;
+				clocks = <&xtal24mhz>;
+			};
+		};
+
+		sp810_syscon0: sysctl@10001000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x10001000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk0",
+					     "timerclk1",
+					     "timerclk2",
+					     "timerclk3";
+			assigned-clocks = <&sp810_syscon0 0>,
+					  <&sp810_syscon0 1>,
+					  <&sp810_syscon0 2>,
+					  <&sp810_syscon0 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+
+		i2c0: i2c@10002000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10002000 0x1000>;
+
+			rtc@68 {
+				compatible = "dallas,ds1338";
+				reg = <0x68>;
+			};
+		};
+
+		serial0: serial@10009000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x10009000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial1: serial@1000a000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000a000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		serial2: serial@1000b000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000b000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+
+		ssp: spi@1000d000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1000d000 0x1000>;
+			clocks = <&sspclk>, <&pclk>;
+			clock-names = "sspclk", "apb_pclk";
+		};
+
+		wdog0: watchdog@1000f000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x1000f000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		wdog1: watchdog@10010000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x10010000 0x1000>;
+			clocks = <&wdogclk>, <&pclk>;
+			clock-names = "wdog_clk", "apb_pclk";
+			status = "disabled";
+		};
+
+		timer01: timer@10011000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10011000 0x1000>;
+			clocks = <&sp810_syscon0 0>,
+			         <&sp810_syscon0 1>,
+				 <&pclk>;
+			clock-names = "timerclk0",
+				    "timerclk1",
+				    "apb_pclk";
+		};
+
+		timer23: timer@10012000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10012000 0x1000>;
+			clocks = <&sp810_syscon0 2>,
+			         <&sp810_syscon0 3>,
+				 <&pclk>;
+			clock-names = "timerclk2",
+				    "timerclk3",
+				    "apb_pclk";
+		};
+
+		gpio0: gpio@10013000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10013000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio1: gpio@10014000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10014000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		gpio2: gpio@10015000 {
+			compatible = "arm,pl061", "arm,primecell";
+			reg = <0x10015000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		i2c1: i2c@10016000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "arm,versatile-i2c";
+			reg = <0x10016000 0x1000>;
+		};
+
+		rtc: rtc@10017000 {
+			compatible = "arm,pl031", "arm,primecell";
+			reg = <0x10017000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		timer45: timer@10018000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10018000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk4", "timerclk5", "apb_pclk";
+		};
+
+		timer67: timer@10019000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x10019000 0x1000>;
+			clocks = <&timclk>, <&timclk>, <&pclk>;
+			clock-names = "timerclk6", "timerclk7", "apb_pclk";
+		};
+
+		sp810_syscon1: sysctl@1001a000 {
+			compatible = "arm,sp810", "arm,primecell";
+			reg = <0x1001a000 0x1000>;
+			clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
+			clock-names = "refclk", "timclk", "apb_pclk";
+			#clock-cells = <1>;
+			clock-output-names = "timerclk4",
+					     "timerclk5",
+					     "timerclk6",
+					     "timerclk7";
+			assigned-clocks = <&sp810_syscon1 0>,
+					  <&sp810_syscon1 1>,
+					  <&sp810_syscon1 2>,
+					  <&sp810_syscon1 3>;
+			assigned-clock-parents = <&timclk>,
+					       <&timclk>,
+					       <&timclk>,
+					       <&timclk>;
+		};
+	};
+
+
+	/* These peripherals are inside the FPGA */
+	fpga {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		aaci: aaci@10004000 {
+			compatible = "arm,pl041", "arm,primecell";
+			reg = <0x10004000 0x1000>;
+			clocks = <&pclk>;
+			clock-names = "apb_pclk";
+		};
+
+		mmc: mmcsd@10005000 {
+			compatible = "arm,pl18x", "arm,primecell";
+			reg = <0x10005000 0x1000>;
+
+			/* Due to frequent FIFO overruns, use just 500 kHz */
+			max-frequency = <500000>;
+			bus-width = <4>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			clocks = <&mclk>, <&pclk>;
+			clock-names = "mclk", "apb_pclk";
+			vmmc-supply = <&vmmc>;
+			cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		kmi0: kmi@10006000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10006000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		kmi1: kmi@10007000 {
+			compatible = "arm,pl050", "arm,primecell";
+			reg = <0x10007000 0x1000>;
+			clocks = <&kmiclk>, <&pclk>;
+			clock-names = "KMIREFCLK", "apb_pclk";
+		};
+
+		serial3: serial@1000c000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x1000c000 0x1000>;
+			clocks = <&uartclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
+		};
+	};
+
+	/* These peripherals are inside the NEC ISSP */
+	issp {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		clcd: clcd@10020000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x10020000 0x1000>;
+			interrupt-names = "combined";
+			clocks = <&oscclk4>, <&pclk>;
+			clock-names = "clcdclk", "apb_pclk";
+			/* 1024x768 16bpp @65MHz works fine */
+			max-memory-bandwidth = <95000000>;
+
+			port {
+				clcd_pads: endpoint {
+					remote-endpoint = <&vga_bridge_in>;
+					arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-c200-v2.dts b/arch/arm/boot/dts/armada-370-c200-v2.dts
new file mode 100644
index 000000000000..84d40e1d70ef
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-c200-v2.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Device Tree file for Ctera C200-V2
+ *
+ * Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Ctera C200 V2";
+	compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
+	};
+
+	thermal-zones {
+		ethphy-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&ethphy0>;
+
+			trips {
+				ethphy_alert1: trip1 {
+					temperature = <65000>;
+					hysteresis = <4000>;
+					type = "passive";
+				};
+
+				ethphy_crit: trip2 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pinctrl-0 = <&pmx_beeper>;
+		pinctrl-names = "default";
+		pwms = <&gpio1 31 4000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_poweroff>;
+		pinctrl-names = "default";
+		gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pmx_buttons>;
+		pinctrl-names = "default";
+
+		button-power {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb1 {
+			label = "USB1 Button";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-usb2 {
+			label = "USB2 Button";
+			linux,code = <BTN_1>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
+		pinctrl-names = "default";
+
+		led-0 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_USB;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-8 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			function = LED_FUNCTION_DISK_ERR;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+		};
+
+		led-10 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-11 {
+			function = LED_FUNCTION_DISK;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&coherencyfab {
+	broken-idle;
+};
+
+&eth1 {
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "rgmii-id";
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <100000>;
+	status = "okay";
+
+	hwmon@2a {
+		compatible = "nuvoton,nct7802";
+		reg = <0x2a>;
+	};
+
+	rtc@30 {
+		compatible = "sii,s35390a";
+		reg = <0x30>;
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "uboot";
+				reg = <0x0000000 0x200000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "certificate";
+				reg = <0x0200000 0x100000>;
+				read-only;
+			};
+
+			partition@300000 {
+				label = "preset_cfg";
+				reg = <0x0300000 0x100000>;
+				read-only;
+			};
+
+			partition@400000 {
+				label = "dev_params";
+				reg = <0x0400000 0x100000>;
+				read-only;
+			};
+			partition@500000 {
+				label = "active_bank";
+				reg = <0x0500000 0x0100000>;
+			};
+
+			partition@600000 {
+				label = "magic";
+				reg = <0x0600000 0x0100000>;
+				read-only;
+			};
+
+			partition@700000 {
+				label = "bank1";
+				reg = <0x0700000 0x2800000>;
+			};
+
+			partition@2f00000 {
+				label = "bank2";
+				reg = <0x2f00000 0x2800000>;
+			};
+
+			/* 0x5700000-0x5a00000 undefined in vendor firmware */
+
+			partition@5a00000 {
+				label = "reserved";
+				reg = <0x5a00000 0x2000000>;
+			};
+
+			partition@7a00000 {
+				label = "rootfs";
+				reg = <0x7a00000 0x8600000>;
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
+		pinctrl-0 = <&pmx_pcie>;
+		pinctrl-names = "default";
+		status = "okay";
+		reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	pmx_poweroff: pmx-poweroff {
+		marvell,pins = "mpp7";
+		marvell,function = "gpo";
+	};
+
+	pmx_power_cpu: pmx-power-cpu {
+		marvell,pins = "mpp4";
+		marvell,function = "vdd";
+	};
+
+	pmx_buttons: pmx-buttons {
+		marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
+		marvell,function = "gpio";
+	};
+
+	pmx_leds1: pmx-leds1 {
+		marvell,pins = "mpp47";
+		marvell,function = "gpo";
+	};
+
+	pmx_leds2: pmx-leds2 {
+		marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
+			       "mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
+		marvell,function = "gpio";
+	};
+
+	pmx_pcie: pmx-pcie {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+
+	pmx_beeper: pmx-beeper {
+		marvell,pins = "mpp63";
+		marvell,function = "gpio";
+	};
+};
+
+&pmsu {
+	pinctrl-0 = <&pmx_power_cpu>;
+	pinctrl-names = "default";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&sata {
+	nr-ports = <2>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hdd0_temp: sata-port@0 {
+		reg = <0>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	hdd1_temp: sata-port@1 {
+		reg = <1>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 03542f7b5b94..a7dc4c04d10b 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada 370 evaluation board
  * (DB-88F6710-BP-DDR3)
@@ -8,44 +9,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default
  * 0xd0000000). The 0xf1000000 is the default used by the recent,
@@ -67,14 +30,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
@@ -85,18 +49,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -153,38 +105,6 @@
 			usb@51000 {
 				status = "okay";
 			};
-
-			spi0: spi@10600 {
-				pinctrl-0 = <&spi0_pins2>;
-				pinctrl-names = "default";
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "mx25l25635e", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * both standard PCIe slots and mini-PCIe
-			 * slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
 		};
 	};
 
@@ -246,3 +166,79 @@
 		compatible = "linux,spdif-dir";
 	};
 };
+
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * both standard PCIe slots and mini-PCIe
+	 * slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "mx25l25635e", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
index af4dc548c1c0..561195b749eb 100644
--- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
+++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for D-Link DNS-327L
  *
  * Copyright (C) 2015, Andrew Andrianov <andrew@ncrmnt.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /* Remaining unsolved:
@@ -62,28 +25,15 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MiB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
+			MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 			sata@a0000 {
@@ -94,61 +44,6 @@
 			usb@50000 {
 				status = "okay";
 			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					/* 1.0 MiB */
-					reg = <0x0000000 0x100000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env";
-					/* 128 KiB */
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "uImage";
-					/* 7 MiB */
-					reg = <0x120000 0x700000>;
-				};
-
-				partition@820000 {
-					label = "ubifs";
-					/* ~ 84 MiB */
-					reg = <0x820000 0x54e0000>;
-				};
-
-				/* Hardcoded into stock bootloader */
-				partition@5d00000 {
-					label = "failsafe-uImage";
-					/* 5 MiB */
-					reg = <0x5d00000 0x500000>;
-				};
-
-				partition@6200000 {
-					label = "failsafe-fs";
-					/* 29 MiB */
-					reg = <0x6200000 0x1d00000>;
-				};
-
-				partition@7f00000 {
-					label = "bbt";
-					/* 1 MiB for BBT */
-					reg = <0x7f00000 0x100000>;
-				};
-			};
 		};
 	};
 
@@ -191,19 +86,19 @@
 
 		pinctrl-names = "default";
 
-		sata-r-amber-pin {
+		led-sata-r-amber {
 			label = "dns327l:amber:sata-r";
 			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		sata-l-amber-pin {
+		led-sata-l-amber {
 			label = "dns327l:amber:sata-l";
 			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 
-		backup-led-pin {
+		led-backup {
 			label = "dns327l:white:usb";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -261,6 +156,20 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 	sata_l_white_pin: sata-l-white-pin {
 		marvell,pins = "mpp57";
@@ -338,9 +247,8 @@
 &mdio {
 	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
 		reg = <0>;
-		marvell,reg-init = <0x0 0x16 0x0 0x0002>,
-				<0x0 0x19 0x0 0x0077>,
-				<0x0 0x18 0x0 0x5747>;
+		marvell,reg-init = <0x2 0x19 0x0 0x0077>,
+				   <0x2 0x18 0x0 0x5747>;
 	};
 };
 
@@ -355,3 +263,68 @@
 	clock-frequency = <100000>;
 	status = "okay";
 };
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				/* 1.0 MiB */
+				reg = <0x0000000 0x100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				/* 128 KiB */
+				reg = <0x100000 0x20000>;
+				read-only;
+			};
+
+			partition@120000 {
+				label = "uImage";
+				/* 7 MiB */
+				reg = <0x120000 0x700000>;
+			};
+
+			partition@820000 {
+				label = "ubifs";
+				/* ~ 84 MiB */
+				reg = <0x820000 0x54e0000>;
+			};
+
+			/* Hardcoded into stock bootloader */
+			partition@5d00000 {
+				label = "failsafe-uImage";
+				/* 5 MiB */
+				reg = <0x5d00000 0x500000>;
+			};
+
+			partition@6200000 {
+				label = "failsafe-fs";
+				/* 29 MiB */
+				reg = <0x6200000 0x1d00000>;
+			};
+
+			partition@7f00000 {
+				label = "bbt";
+				/* 1 MiB for BBT */
+				reg = <0x7f00000 0x100000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts
index 0f40d5da28c3..7c2f5a79b50d 100644
--- a/arch/arm/boot/dts/armada-370-mirabox.dts
+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Globalscale Mirabox
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -54,30 +17,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected on the PCB to a USB 3.0 XHCI controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
@@ -112,17 +60,6 @@
 				};
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -138,6 +75,10 @@
 				phy-mode = "rgmii-id";
 			};
 
+			crypto@90000 {
+				status = "okay";
+			};
+
 			mvsdio@d4000 {
 				pinctrl-0 = <&sdio_pins3>;
 				pinctrl-names = "default";
@@ -167,35 +108,42 @@
 					reg = <0x25>;
 				};
 			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x400000>;
-				};
-				partition@400000 {
-					label = "Linux";
-					reg = <0x400000 0x400000>;
-				};
-				partition@800000 {
-					label = "Filesystem";
-					reg = <0x800000 0x3f800000>;
-				};
-			};
 		};
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected on the PCB to a USB 3.0 XHCI controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	pwr_led_pin: pwr-led-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	stat_led_pins: stat-led-pins {
@@ -204,3 +152,33 @@
 	};
 };
 
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Linux";
+				reg = <0x400000 0x400000>;
+			};
+			partition@800000 {
+				label = "Filesystem";
+				reg = <0x800000 0x3f800000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
index a31207860f34..079b37cf148a 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for NETGEAR ReadyNAS 102
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -56,32 +19,23 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-		pcie-controller {
-			status = "okay";
+		internal-regs {
 
-			/* Connected to Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
 			};
 
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
-
-		internal-regs {
 			serial@12000 {
 				status = "okay";
 			};
@@ -92,14 +46,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-			};
-
 			ethernet@74000 {
 				pinctrl-0 = <&ge1_rgmii_pins>;
 				pinctrl-names = "default";
@@ -113,14 +59,17 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 
-				isl12057: isl12057@68 {
+				isl12057: rtc@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
+					wakeup-source;
 				};
 
 				g762: g762@3e {
@@ -132,55 +81,15 @@
 					pwm_polarity = <0>;
 				};
 			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
 		};
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
@@ -250,6 +159,30 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+};
+
 &pinctrl {
 	power_led_pin: power-led-pin {
 		marvell,pins = "mpp57";
@@ -291,3 +224,53 @@
 		marvell,function = "gpio";
 	};
 };
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
index 00540f292979..d752ac1d7b58 100644
--- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts
+++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for NETGEAR ReadyNAS 104
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -56,48 +19,27 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
-			/* Connected to FL1009 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
+		internal-regs {
 
-			/* Connected to Marvell 88SE9215 SATA controller */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
 			};
-		};
 
-		internal-regs {
 			serial@12000 {
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -119,14 +61,17 @@
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <100000>;
+
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+
 				status = "okay";
 
-				isl12057: isl12057@68 {
+				isl12057: rtc@68 {
 					compatible = "isil,isl12057";
 					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
+					wakeup-source;
 				};
 
 				g762: g762@3e {
@@ -145,55 +90,15 @@
 					reg = <0x23>;
 				};
 			};
-
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
-
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
-
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
-
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
-
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
-			};
 		};
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <8192>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <8192>;
+		};
 	};
 
 	gpio-leds {
@@ -238,6 +143,20 @@
 		};
 	};
 
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>,
+				<&gpio1 26 GPIO_ACTIVE_HIGH>,
+				<&gpio1 27 GPIO_ACTIVE_HIGH>,
+				<&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&backup_button_pin
@@ -272,6 +191,34 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to FL1009 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to Marvell 88SE9215 SATA controller */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	poweroff: poweroff {
 		marvell,pins = "mpp60";
@@ -290,7 +237,7 @@
 
 	backup_led_pin: backup-led-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	power_led_pin: power-led-pin {
@@ -303,3 +250,53 @@
 		marvell,function = "gpio";
 	};
 };
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts
index 19475e68b8e9..b459a670f615 100644
--- a/arch/arm/boot/dts/armada-370-rd.dts
+++ b/arch/arm/boot/dts/armada-370-rd.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada 370 Reference Design board
  * (RD-88F6710-A1)
@@ -6,44 +7,6 @@
  *
  *  Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default
  * 0xd0000000). The 0xf1000000 is the default used by the recent,
@@ -56,6 +19,8 @@
 
 /dts-v1/;
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-370.dtsi"
 
@@ -67,30 +32,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Internal mini-PCIe connector */
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
@@ -101,14 +51,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				pinctrl-0 = <&mdio_pins>;
-				pinctrl-names = "default";
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
@@ -120,8 +62,8 @@
 				status = "okay";
 				phy-mode = "rgmii-id";
 				fixed-link {
-					   speed = <1000>;
-					   full-duplex;
+					speed = <1000>;
+					full-duplex;
 				};
 			};
 
@@ -143,9 +85,7 @@
 
 			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				button@1 {
+				button {
 					label = "Software Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
@@ -171,42 +111,55 @@
 					default-state = "keep";
 				};
 			};
+		};
+	};
+};
 
-			nand@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
+&pciec {
+	status = "okay";
+
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Internal mini-PCIe connector */
+	pcie@2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_WHITE>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
 			};
 		};
 	};
 
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
+	switch: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
 		#size-cells = <0>;
+		reg = <0x10>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
-		dsa,ethernet = <&eth1>;
-		dsa,mii-bus = <&mdio>;
-
-		switch@0 {
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x10 0>;	/* MDIO address 16, switch 0 in tree */
 
 			port@0 {
 				reg = <0>;
@@ -214,27 +167,62 @@
 			};
 
 			port@1 {
-			       reg = <1>;
-			       label = "lan1";
+				reg = <1>;
+				label = "lan1";
 			};
 
 			port@2 {
-			       reg = <2>;
-			       label = "lan2";
+				reg = <2>;
+				label = "lan2";
 			};
 
 			port@3 {
-			       reg = <3>;
-			       label = "lan3";
+				reg = <3>;
+				label = "lan3";
 			};
 
 			port@5 {
-			      reg = <5>;
-			      label = "cpu";
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 		};
-	 };
- };
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switchphy0: switchphy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch>;
+				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy1: switchphy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy2: switchphy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			switchphy3: switchphy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch>;
+				interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
 
 &pinctrl {
 	fan_pins: fan-pins {
@@ -247,3 +235,34 @@
 		marvell,function = "gpio";
 	};
 };
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
new file mode 100644
index 000000000000..8dd242e668e6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 2-Bay
+ * Code name (board/PCB)        : Dart 2-Bay
+ * Model name (case sticker)    : SRPD20
+ * Material desc (product spec) : STCTxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+
+/ {
+	model = "Seagate NAS 2-Bay (Dart, SRPD20)";
+	compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp";
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  950 2
+			 1400 1
+			 1800 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
new file mode 100644
index 000000000000..9cb69999b1db
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate NAS 4-Bay
+ * Code name (board/PCB)        : Dart 4-Bay
+ * Model name (case sticker)    : SRPD40
+ * Material desc (product spec) : STCUxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-nas-xbay.dtsi"
+#include <dt-bindings/leds/leds-ns2.h>
+
+/ {
+	model = "Seagate NAS 4-Bay (Dart, SRPD40)";
+	compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				/* I2C GPIO expander (PCA9554A) */
+				pca9554: pca9554@21 {
+					compatible = "nxp,pca9554";
+					reg = <0x21>;
+					#gpio-cells = <2>;
+					gpio-controller;
+				};
+			};
+		};
+	};
+
+	regulators {
+		regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "SATA2 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "SATA3 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		led-red-sata2 {
+			label = "dart:red:sata2";
+			gpios = <&pca9554 0 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata3 {
+			label = "dart:red:sata3";
+			gpios = <&pca9554 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds-ns2 {
+		compatible = "lacie,ns2-leds";
+
+		white-sata2 {
+			label = "dart:white:sata2";
+			cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+		white-sata3 {
+			label = "dart:white:sata3";
+			cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
+			slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>;
+			num-modes = <4>;
+			modes-map = <NS_V2_LED_SATA 0 0
+				     NS_V2_LED_OFF  0 1
+				     NS_V2_LED_ON   1 0
+				     NS_V2_LED_ON   1 1>;
+		};
+	};
+
+	gpio-fan {
+		gpio-fan,speed-map =
+			<   0 3
+			  800 2
+			  1050 1
+			  1300 0>;
+	};
+};
+
+&pciec {
+	/* SATA AHCI controller 88SE9170 */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
new file mode 100644
index 000000000000..822f10734946
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi
@@ -0,0 +1,237 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Vincent Donnefort <vdonnefort@gmail.com>
+ */
+
+/*
+ * TODO: add support for the white SATA LEDs associated with HDD 0 and 1.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			serial@12000 {
+				status = "okay";
+			};
+
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
+			};
+
+			ethernet@70000 {
+				status = "okay";
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			i2c@11000 {
+				status = "okay";
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				clock-frequency = <100000>;
+
+				/* RTC - NXP 8563T (second source) */
+				rtc@51 {
+					compatible = "nxp,pcf8563";
+					reg = <0x51>;
+					interrupts = <110>;
+				};
+				/* RTC - MCP7940NT */
+				rtc@6f {
+					compatible = "microchip,mcp7941x";
+					reg = <0x6f>;
+					interrupts = <110>;
+				};
+			};
+		};
+
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH
+			 &gpio2 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-backup {
+			label = "Backup button";
+			linux,code = <KEY_OPTION>;
+			gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-white-power {
+			label = "dart:white:power";
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+
+		};
+		led-red-power {
+			label = "dart:red:power";
+			gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		};
+		led-red-sata0 {
+			label = "dart:red:sata0";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+		};
+		led-red-sata1 {
+			label = "dart:red:sata1";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 bridge ASM1042A */
+	pcie@2,0 {
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>;
+	pinctrl-names = "default";
+
+	hdd0_led_sata_pin: hdd0-led-sata-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "sata1";
+	};
+	hdd0_led_gpio_pin: hdd0-led-gpio-pin {
+		marvell,pins = "mpp48";
+		marvell,function = "gpio";
+	};
+	hdd1_led_sata_pin: hdd1-led-sata-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "sata0";
+	};
+	hdd1_led_gpio_pin: hdd1-led-gpio-pin {
+		marvell,pins = "mpp57";
+		marvell,function = "gpio";
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0 0x300000>;
+			};
+			partition@300000 {
+				label = "device-tree";
+				reg = <0x300000 0x20000>;
+			};
+			partition@320000 {
+				label = "linux";
+				reg = <0x320000 0x2000000>;
+			};
+			partition@2320000 {
+				label = "rootfs";
+				reg = <0x2320000 0xdce0000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
new file mode 100644
index 000000000000..5ee572dc9242
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud 2-Bay
+ * Code name (board/PCB)        : Cumulus Max
+ * Model name (case sticker)    : SRN22C
+ * Material desc (product spec) : STCSxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)";
+	compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <2>;
+			};
+		};
+	};
+
+	regulators {
+		regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "SATA1 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
new file mode 100644
index 000000000000..578b54b39c8f
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * Here are some information allowing to identify the device:
+ *
+ * Product name                 : Seagate Personal Cloud
+ * Code name (board/PCB)        : Cumulus
+ * Model name (case sticker)    : SRN21C
+ * Material desc (product spec) : STCRxxxxxxx
+ */
+
+/dts-v1/;
+#include "armada-370-seagate-personal-cloud.dtsi"
+
+/ {
+	model = "Seagate Personal Cloud (Cumulus, SRN21C)";
+	compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp";
+
+	soc {
+		internal-regs {
+			sata@a0000 {
+				status = "okay";
+				nr-ports = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
new file mode 100644
index 000000000000..124a8ba279e3
--- /dev/null
+++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi
@@ -0,0 +1,173 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay
+ * (Armada 370 SoC).
+ *
+ * Copyright (C) 2015 Seagate
+ *
+ * Author: Simon Guinot <simon.guinot@sequanux.org>
+ */
+
+/*
+ * TODO: add support for the white SATA LED.
+ */
+
+#include "armada-370.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			coherency-fabric@20200 {
+				broken-idle;
+			};
+
+			serial@12000 {
+				status = "okay";
+			};
+
+			ethernet@74000 {
+				status = "okay";
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
+
+			usb@50000 {
+				status = "okay";
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "USB Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 27 GPIO_ACTIVE_LOW>;
+		};
+		regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "SATA0 power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-power {
+			label = "Power button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+			debounce-interval = <100>;
+		};
+		button-reset {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+		button-usb {
+			label = "USB VBUS error";
+			linux,code = <KEY_UNKNOWN>;
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <100>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-red-sata0 {
+			label = "cumulus:red:sata0";
+			gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio_poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* USB 3.0 Bridge ASM1042A */
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pinctrl {
+	pinctrl-0 = <&sata_led_pin>;
+	pinctrl-names = "default";
+
+	sata_led_pin: sata-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "sata0";
+	};
+	gpio_led_pin: gpio-led-pin {
+		marvell,pins = "mpp60";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-0 = <&spi0_pins2>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		/* MX25L8006E */
+		compatible = "mxicy,mx25l8005", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
index 4f4924362bf0..f0893cc06607 100644
--- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts
+++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Synology DS213j
  *
  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the old 0xd0000000).
  * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
@@ -70,14 +33,15 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
 
 		internal-regs {
 
@@ -86,62 +50,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000c0000>; /* 768KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000c0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@00390000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x00390000 0x00440000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				pinctrl-0 = <&i2c0_pins>;
@@ -182,16 +90,10 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
-			       status = "okay";
-			       phy = <&phy1>;
-			       phy-mode = "sgmii";
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "sgmii";
 			};
 
 			sata@a0000 {
@@ -247,7 +149,7 @@
 		pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
 		pinctrl-names = "default";
 
-		sata1_regulator: sata1-regulator {
+		sata1_regulator: sata1-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "SATA1 Power";
@@ -260,7 +162,7 @@
 			gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata2_regulator: sata2-regulator {
+		sata2_regulator: sata2-regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "SATA2 Power";
@@ -275,6 +177,12 @@
 	};
 };
 
+&mdio {
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	disk1_led_pin: disk1-led-pin {
 		marvell,pins = "mpp31";
@@ -338,7 +246,7 @@
 
 	fan_ctrl_high_pin: fan-ctrl-high-pin {
 		marvell,pins = "mpp63";
-		marvell,function = "gpo";
+		marvell,function = "gpio";
 	};
 
 	fan_alarm_pin: fan-alarm-pin {
@@ -346,3 +254,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000c0000>; /* 768KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000c0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@390000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x00390000 0x00440000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index a718866ba52d..0b8c2a64b36f 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 370 and Armada XP SoC
  *
@@ -8,50 +9,10 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * This file contains the definitions that are common to the Armada
  * 370 and Armada XP SoC.
  */
 
-/include/ "skeleton64.dtsi"
-
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
@@ -86,7 +47,7 @@
 		pcie-mem-aperture = <0xf8000000 0x7e00000>;
 		pcie-io-aperture  = <0xffe00000 0x100000>;
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -96,7 +57,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -106,7 +67,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -116,7 +77,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -126,7 +87,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -142,38 +103,17 @@
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <50>;
 			};
 
-			spi0: spi@10600 {
-				reg = <0x10600 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <30>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				reg = <0x10680 0x28>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <92>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <31>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -183,7 +123,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <32>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -234,33 +173,38 @@
 				msi-controller;
 			};
 
-			coherency-fabric@20200 {
+			coherencyfab: coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
 				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
-			timer@20300 {
+			timer: timer@20300 {
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				reg = <0x20300 0x34>, <0x20704 0x4>;
 			};
 
-			pmsu@22000 {
+			cpurst: cpurst@20800 {
+				compatible = "marvell,armada-370-cpu-reset";
+				reg = <0x20800 0x8>;
+			};
+
+			pmsu: pmsu@22000 {
 				compatible = "marvell,armada-370-pmsu";
 				reg = <0x22000 0x1000>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <45>;
 				status = "disabled";
 			};
 
-			usb@51000 {
+			usb1: usb@51000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x51000 0x500>;
 				interrupts = <46>;
@@ -274,7 +218,7 @@
 				status = "disabled";
 			};
 
-			mdio: mdio {
+			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
@@ -289,7 +233,7 @@
 				status = "disabled";
 			};
 
-			sata@a0000 {
+			sata: sata@a0000 {
 				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <55>;
@@ -298,17 +242,17 @@
 				status = "disabled";
 			};
 
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <113>;
 				clocks = <&coredivclk 0>;
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <54>;
@@ -320,6 +264,42 @@
 				status = "disabled";
 			};
 		};
+
+		spi0: spi@10600 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <30>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
+			      <MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
+			      <MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
+			      <MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
+			      <MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
+			      <MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
+			      <MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
+			      <MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
+			      <MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <92>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi
index 53a1a5abe147..2013a5ccecd3 100644
--- a/arch/arm/boot/dts/armada-370.dtsi
+++ b/arch/arm/boot/dts/armada-370.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 370 family SoC
  *
@@ -7,52 +8,16 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada 370 SoC that are not
  * common to all Armada SoCs.
  */
 
 #include "armada-370-xp.dtsi"
-/include/ "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 370 family SoC";
 	compatible = "marvell,armada370", "marvell,armada-370-xp";
 
@@ -70,7 +35,7 @@
 			reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
 		};
 
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -89,43 +54,65 @@
 				0x82000000 0x2 0     MBUS_ID(0x08, 0xe8) 0       1 0 /* Port 1.0 MEM */
 				0x81000000 0x2 0     MBUS_ID(0x08, 0xe0) 0       1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
 		internal-regs {
-			L2: l2-cache {
+			L2: l2-cache@8000 {
 				compatible = "marvell,aurora-outer-cache";
 				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
@@ -134,56 +121,39 @@
 				wt-override;
 			};
 
-			/*
-			 * Default SPI pinctrl setting, can be overwritten on
-			 * board level if a different configuration is used.
-			 */
-			spi0: spi@10600 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins1>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-370-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-			};
-
-			i2c0: i2c@11000 {
-				reg = <0x11000 0x20>;
-			};
-
-			i2c1: i2c@11100 {
-				reg = <0x11100 0x20>;
-			};
-
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <2>;
 				gpio-controller;
@@ -193,22 +163,8 @@
 				interrupts = <91>;
 			};
 
-			/*
-			 * Default UART pinctrl setting without RTS/CTS, can
-			 * be overwritten on board level if a different
-			 * configuration is used.
-			 */
-			uart0: serial@12000 {
-				pinctrl-0 = <&uart0_pins>;
-				pinctrl-names = "default";
-			};
-
-			uart1: serial@12100 {
-				pinctrl-0 = <&uart1_pins>;
-				pinctrl-names = "default";
-			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x100>;
 			};
@@ -226,34 +182,20 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@18300 {
+			thermal: thermal@18300 {
 				compatible = "marvell,armada370-thermal";
 				reg = <0x18300 0x4
 					0x18304 0x4>;
 				status = "okay";
 			};
 
-			sscg@18330 {
+			sscg: sscg@18330 {
 				reg = <0x18330 0x4>;
 			};
 
-			interrupt-controller@20a00 {
-				reg = <0x20a00 0x1d0>, <0x21870 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-370-timer";
-				clocks = <&coreclk 2>;
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-370-wdt";
-				clocks = <&coreclk 2>;
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x8>;
+			cpuconf: cpu-config@21000 {
+				compatible = "marvell,armada-370-cpu-config";
+				reg = <0x21000 0x8>;
 			};
 
 			audio_controller: audio-controller@30000 {
@@ -266,15 +208,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
-				clocks = <&coreclk 0>;
-			};
-
-			usb@51000 {
-				clocks = <&coreclk 0>;
-			};
-
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60A00 0x100>;
@@ -293,7 +227,7 @@
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -312,17 +246,94 @@
 				};
 			};
 
-			ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-370-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>;
+				clocks = <&gateclk 23>;
+				clock-names = "cesa0";
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x7e0>;
 			};
+		};
+
+		crypto_sram: sa-sram {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x01) 0 0x800>;
+			reg-names = "sram";
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>;
 
-			ethernet@74000 {
-				compatible = "marvell,armada-370-neta";
+			/*
+			 * The Armada 370 has an erratum preventing the use of
+			 * the standard workflow for CPU idle support (relying
+			 * on the BootROM code to enter/exit idle state).
+			 * Reserve some amount of the crypto SRAM to put the
+			 * cpuidle workaround.
+			 */
+			idle-sram@0 {
+				reg = <0x0 0x20>;
 			};
 		};
 	};
 };
 
+/*
+ * Default UART pinctrl setting without RTS/CTS, can be overwritten on
+ * board level if a different configuration is used.
+ */
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+};
+
+&i2c0 {
+	reg = <0x11000 0x20>;
+};
+
+&i2c1 {
+	reg = <0x11100 0x20>;
+};
+
+&mpic {
+	reg = <0x20a00 0x1d0>, <0x21870 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-370-timer";
+	clocks = <&coreclk 2>;
+};
+
+&watchdog {
+	compatible = "marvell,armada-370-wdt";
+	clocks = <&coreclk 2>;
+};
+
+&usb0 {
+	clocks = <&coreclk 0>;
+};
+
+&usb1 {
+	clocks = <&coreclk 0>;
+};
+
+&eth0 {
+	compatible = "marvell,armada-370-neta";
+};
+
+&eth1 {
+	compatible = "marvell,armada-370-neta";
+};
+
 &pinctrl {
 	compatible = "marvell,mv88f6710-pinctrl";
 
@@ -410,3 +421,19 @@
 		marvell,function = "ge1";
 	};
 };
+
+/*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+&spi0 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins1>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-370-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts
index 5711b97e876c..4c4092790a20 100644
--- a/arch/arm/boot/dts/armada-375-db.dts
+++ b/arch/arm/boot/dts/armada-375-db.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada 375 evaluation board
  * (DB-88F6720)
@@ -6,44 +7,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -58,147 +21,162 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-			spi@10600 {
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-				/*
-				 * SPI conflicts with NAND, so we disable it
-				 * here, and select NAND as the enabled device
-				 * by default.
-				 */
-				status = "disabled";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>;
 
-			i2c@11000 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c0_pins>;
-				pinctrl-names = "default";
-			};
+	};
+};
+&pciec {
+	status = "okay";
+};
 
-			i2c@11100 {
-				status = "okay";
-				clock-frequency = <100000>;
-				pinctrl-0 = <&i2c1_pins>;
-				pinctrl-names = "default";
-			};
+/*
+ * The two PCIe units are accessible through
+ * standard PCIe slots on the board.
+ */
+&pcie0 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
 
-			serial@12000 {
-				status = "okay";
-			};
+&pcie1 {
+	/* Port 1, Lane 0 */
+	status = "okay";
+};
 
-			pinctrl {
-				sdio_st_pins: sdio-st-pins {
-					marvell,pins = "mpp44", "mpp45";
-					marvell,function = "gpio";
-				};
-			};
 
-			sata@a0000 {
-				status = "okay";
-				nr-ports = <2>;
-			};
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
 
-			nand: nand@d0000 {
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
-			};
+	/*
+	 * SPI conflicts with NAND, so we disable it here, and
+	 * select NAND as the enabled device by default.
+	 */
 
-			usb@54000 {
-				status = "okay";
-			};
+	status = "disabled";
 
-			usb3@58000 {
-				status = "okay";
-			};
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
 
-			mvsdio@d4000 {
-				pinctrl-0 = <&sdio_pins &sdio_st_pins>;
-				pinctrl-names = "default";
-				status = "okay";
-				cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-				wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
-			};
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+};
 
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
+&uart0 {
+	status = "okay";
+};
 
-			ethernet@f0000 {
-				status = "okay";
+&pinctrl {
+	sdio_st_pins: sdio-st-pins {
+		marvell,pins = "mpp44", "mpp45";
+		marvell,function = "gpio";
+	};
+};
 
-				eth0@c4000 {
-					status = "okay";
-					phy = <&phy0>;
-					phy-mode = "rgmii-id";
-				};
+&sata {
+	status = "okay";
+	nr-ports = <2>;
+};
 
-				eth1@c5000 {
-					status = "okay";
-					phy = <&phy3>;
-					phy-mode = "gmii";
-				};
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
 			};
-		};
-
-		pcie-controller {
-			status = "okay";
-			/*
-			 * The two PCIe units are accessible through
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
 			};
-			pcie@2,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
 			};
 		};
 	};
 };
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins &sdio_st_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
+&ethernet {
+	status = "okay";
+};
+
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy3>;
+	phy-mode = "gmii";
+};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 67a0ab0f71e0..ddc49547d786 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 375 family SoC
  *
@@ -5,47 +6,8 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/phy/phy.h>
@@ -53,6 +15,9 @@
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 375 family SoC";
 	compatible = "marvell,armada375";
 
@@ -65,7 +30,7 @@
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -84,12 +49,12 @@
 		#size-cells = <0>;
 		enable-method = "marvell,armada-375-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -115,7 +80,7 @@
 			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
 		};
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -125,7 +90,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -135,7 +100,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -145,7 +110,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -155,7 +120,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -176,14 +141,18 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
 			};
 
-			scu@c000 {
+			scu: scu@c000 {
 				compatible = "arm,cortex-a9-scu";
 				reg = <0xc000 0x58>;
 			};
 
-			timer@c600 {
+			timer0: timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
 				interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
@@ -199,7 +168,7 @@
 				      <0xc100 0x100>;
 			};
 
-			mdio {
+			mdio: mdio@c0054 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
@@ -208,7 +177,9 @@
 			};
 
 			/* Network controller */
-			ethernet@f0000 {
+			ethernet: ethernet@f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
 				compatible = "marvell,armada-375-pp2";
 				reg = <0xf0000 0xa000>, /* Packet Processor regs */
 				      <0xc0000 0x3060>, /* LMS regs */
@@ -218,20 +189,22 @@
 				clock-names = "pp_clk", "gop_clk";
 				status = "disabled";
 
-				eth0: eth0@c4000 {
+				eth0: ethernet-port@0 {
 					interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <0>;
+					reg = <0>;
+					port-id = <0>; /* For backward compatibility. */
 					status = "disabled";
 				};
 
-				eth1: eth1@c5000 {
+				eth1: ethernet-port@1 {
 					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-					port-id = <1>;
+					reg = <1>;
+					port-id = <1>; /* For backward compatibility. */
 					status = "disabled";
 				};
 			};
 
-			rtc@10300 {
+			rtc: rtc@10300 {
 				compatible = "marvell,orion-rtc";
 				reg = <0x10300 0x20>;
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
@@ -267,7 +240,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -278,7 +250,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -303,7 +274,7 @@
 				status = "disabled";
 			};
 
-			pinctrl {
+			pinctrl: pinctrl@18000 {
 				compatible = "marvell,mv88f6720-pinctrl";
 				reg = <0x18000 0x24>;
 
@@ -378,7 +349,7 @@
 				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-375-system-controller";
 				reg = <0x18200 0x100>;
 			};
@@ -411,7 +382,7 @@
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			timer@20300 {
+			timer1: timer@20300 {
 				compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
 				interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
@@ -424,24 +395,24 @@
 				clock-names = "nbclk", "fixed";
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				compatible = "marvell,armada-375-wdt";
 				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
 				clocks = <&coreclk 0>, <&refclk>;
 				clock-names = "nbclk", "fixed";
 			};
 
-			cpurst@20800 {
+			cpurst: cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
 
-			coherency-fabric@21010 {
+			coherencyfab: coherency-fabric@21010 {
 				compatible = "marvell,armada-375-coherency-fabric";
 				reg = <0x21010 0x1c>;
 			};
 
-			usb@50000 {
+			usb0: usb@50000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x50000 0x500>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -451,7 +422,7 @@
 				status = "disabled";
 			};
 
-			usb@54000 {
+			usb1: usb@54000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x54000 0x500>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -459,7 +430,7 @@
 				status = "disabled";
 			};
 
-			usb3@58000 {
+			usb2: usb@58000 {
 				compatible = "marvell,armada-375-xhci";
 				reg = <0x58000 0x20000>,<0x5b880 0x80>;
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -469,7 +440,7 @@
 				status = "disabled";
 			};
 
-			xor@60800 {
+			xor0: xor@60800 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60A00 0x100>;
@@ -489,7 +460,7 @@
 				};
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -509,8 +480,23 @@
 				};
 			};
 
-			sata@a0000 {
-				compatible = "marvell,orion-sata";
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-375-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>, <&gateclk 31>,
+					 <&gateclk 28>, <&gateclk 29>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			sata: sata@a0000 {
+				compatible = "marvell,armada-370-sata";
 				reg = <0xa0000 0x5000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 14>, <&gateclk 20>;
@@ -518,17 +504,17 @@
 				status = "disabled";
 			};
 
-			nand@d0000 {
-				compatible = "marvell,armada370-nand";
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
 			};
 
-			mvsdio@d4000 {
+			sdio: mvsdio@d4000 {
 				compatible = "marvell,orion-sdio";
 				reg = <0xd4000 0x200>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
@@ -540,7 +526,7 @@
 				status = "disabled";
 			};
 
-			thermal@e8078 {
+			thermal: thermal@e8078 {
 				compatible = "marvell,armada375-thermal";
 				reg = <0xe8078 0x4>, <0xe807c 0x8>;
 				status = "okay";
@@ -561,7 +547,7 @@
 			};
 		};
 
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -580,40 +566,80 @@
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
 				0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
 
-			pcie@1,0 {
+			pcie0: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@2,0 {
+			pcie1: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 30>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 31>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index 5102d19cc8f4..e94f22b0e9b5 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 380 SoC.
  *
@@ -6,44 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "armada-38x.dtsi"
@@ -71,7 +34,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -101,51 +64,84 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
new file mode 100644
index 000000000000..f4c4b213ef4e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-381-netgear-gs110emx.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Netgear GS110EMX";
+	compatible = "netgear,gs110emx", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&front_button_pins>;
+		pinctrl-names = "default";
+
+		key-factory-default {
+			label = "Factory Default";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>; /* 128 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	fixed-link {
+		full-duplex;
+		pause;
+		speed = <1000>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6190";
+		#address-cells = <1>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&switch_interrupt_pins>;
+		pinctrl-names = "default";
+		#size-cells = <0>;
+		reg = <0>;
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy1: switch0phy1@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy2: switch0phy2@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy3: switch0phy3@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy4: switch0phy4@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy5: switch0phy5@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy6: switch0phy6@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy7: switch0phy7@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy8: switch0phy8@8 {
+				reg = <0x8>;
+			};
+		};
+
+		mdio-external {
+			compatible = "marvell,mv88e6xxx-mdio-external";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy1: ethernet-phy@b {
+				reg = <0xb>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+
+			phy2: ethernet-phy@c {
+				reg = <0xc>;
+				compatible = "ethernet-phy-ieee802.3-c45";
+			};
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				ethernet = <&eth0>;
+				phy-mode = "rgmii";
+				reg = <0>;
+
+				fixed-link {
+					full-duplex;
+					pause;
+					speed = <1000>;
+				};
+			};
+
+			port@1 {
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+				reg = <1>;
+			};
+
+			port@2 {
+				label = "lan2";
+				phy-handle = <&switch0phy2>;
+				reg = <2>;
+			};
+
+			port@3 {
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+				reg = <3>;
+			};
+
+			port@4 {
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+				reg = <4>;
+			};
+
+			port@5 {
+				label = "lan5";
+				phy-handle = <&switch0phy5>;
+				reg = <5>;
+			};
+
+			port@6 {
+				label = "lan6";
+				phy-handle = <&switch0phy6>;
+				reg = <6>;
+			};
+
+			port@7 {
+				label = "lan7";
+				phy-handle = <&switch0phy7>;
+				reg = <7>;
+			};
+
+			port@8 {
+				label = "lan8";
+				phy-handle = <&switch0phy8>;
+				reg = <8>;
+			};
+
+			port@9 {
+				/* 88X3310P external phy */
+				label = "lan9";
+				phy-handle = <&phy1>;
+				phy-mode = "xaui";
+				reg = <9>;
+			};
+
+			port@a {
+				/* 88X3310P external phy */
+				label = "lan10";
+				phy-handle = <&phy2>;
+				phy-mode = "xaui";
+				reg = <0xa>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	front_button_pins: front-button-pins {
+		marvell,pins = "mpp38";
+		marvell,function = "gpio";
+	};
+
+	switch_interrupt_pins: switch-interrupt-pins {
+		marvell,pins = "mpp39";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "boot";
+				read-only;
+				reg = <0x00000000 0x00100000>;
+			};
+
+			partition@100000 {
+				label = "env";
+				reg = <0x00100000 0x00010000>;
+			};
+
+			partition@200000 {
+				label = "rsv";
+				reg = <0x00110000 0x00010000>;
+			};
+
+			partition@300000 {
+				label = "image0";
+				reg = <0x00120000 0x00900000>;
+			};
+
+			partition@400000 {
+				label = "config";
+				reg = <0x00a20000 0x00300000>;
+			};
+
+			partition@480000 {
+				label = "debug";
+				reg = <0x00d20000 0x002e0000>;
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts b/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts
new file mode 100644
index 000000000000..584f0d0398a5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-382-rd-ac3x-48g4x2xl.dts
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 382 reference board
+ * (RD-AC3X-48G4X2XL)
+ *
+ * Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 382 RD-AC3X";
+	compatible = "marvell,rd-ac3x-48g4x2xl", "marvell,rd-ac3x",
+			 "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	eeprom@53{
+		compatible = "atmel,24c64";
+		reg = <0x53>;
+	};
+
+	/* CPLD device present at 0x3c. Function unknown */
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&eth1 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00500000>;
+				label = "u-boot";
+			};
+			partition@500000{
+				reg = <0x00500000 0x00400000>;
+				label = "u-boot env";
+			};
+			partition@900000{
+				reg = <0x00900000 0x3F700000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <200000000>;
+};
diff --git a/arch/arm/boot/dts/armada-385-atl-x530.dts b/arch/arm/boot/dts/armada-385-atl-x530.dts
new file mode 100644
index 000000000000..241f5d7c80e9
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-atl-x530.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Armada 385 Allied Telesis x530/GS980MX Board.
+ (x530/AT-GS980MX)
+ *
+ Copyright (C) 2020 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "x530/AT-GS980MX";
+	compatible = "alliedtelesis,gs980mx", "alliedtelesis,x530", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x3d) 0 0xf4800000 0x80000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c0: i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+			};
+
+			uart0: serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+	reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <400000>;
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&devbus_cs1 {
+	compatible = "marvell,mvebu-devbus";
+	status = "okay";
+
+	devbus,bus-width    = <8>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+
+	nvs@0 {
+		status = "okay";
+
+		compatible = "mtd-ram";
+		reg = <0 0x00080000>;
+		bank-width = <1>;
+		label = "nvs";
+	};
+};
+
+&pinctrl {
+	i2c0_gpio_pins: i2c-gpio-pins-0 {
+		marvell,pins = "mpp2", "mpp3";
+		marvell,function = "gpio";
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-1 = <&i2c0_gpio_pins>;
+	scl-gpio = <&gpio0 2 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+	sda-gpio = <&gpio0 3 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+	i2c0mux: mux@71 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,pca9544";
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 { /* POE devices MUX */
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adt7476_2e: hwmon@2e {
+				compatible = "adi,adt7476";
+				reg = <0x2e>;
+			};
+
+			adt7476_2d: hwmon@2d {
+				compatible = "adi,adt7476";
+				reg = <0x2d>;
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			rtc@68 {
+				compatible = "dallas,ds1340";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			gpio@20 {
+				compatible = "nxp,pca9554";
+				gpio-controller;
+				#gpio-cells = <2>;
+				reg = <0x20>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <1>; /* Chip select 1 */
+		spi-max-frequency = <54000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@u-boot {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@u-boot-env {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+			partition@unused {
+				reg = <0x00140000 0x00e80000>;
+				label = "unused";
+			};
+			partition@idprom {
+				reg = <0x00fc0000 0x00040000>;
+				label = "idprom";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		marvell,nand-enable-arbiter;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@user {
+				reg = <0x00000000 0x0f000000>;
+				label = "user";
+			};
+			partition@errlog {
+				/* Maximum mtdoops size is 8MB, so set to that. */
+				reg = <0x0f000000 0x00800000>;
+				label = "errlog";
+			};
+			partition@nand-bbt {
+				reg = <0x0f800000 0x00800000>;
+				label = "nand-bbt";
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
new file mode 100644
index 000000000000..1990f7d0cc79
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-l8.dts
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR L8";
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6190";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan8";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan6";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "lan4";
+				phy-handle = <&switch0phy4>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "lan3";
+				phy-handle = <&switch0phy5>;
+			};
+
+			port@7 {
+				reg = <7>;
+				label = "lan2";
+				phy-handle = <&switch0phy6>;
+			};
+
+			port@8 {
+				reg = <8>;
+				label = "lan1";
+				phy-handle = <&switch0phy7>;
+			};
+
+			port@10 {
+				reg = <10>;
+				phy-mode = "2500base-x";
+
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@1 {
+				reg = <0x1>;
+			};
+
+			switch0phy1: switch0phy1@2 {
+				reg = <0x2>;
+			};
+
+			switch0phy2: switch0phy2@3 {
+				reg = <0x3>;
+			};
+
+			switch0phy3: switch0phy3@4 {
+				reg = <0x4>;
+			};
+
+			switch0phy4: switch0phy4@5 {
+				reg = <0x5>;
+			};
+
+			switch0phy5: switch0phy5@6 {
+				reg = <0x6>;
+			};
+
+			switch0phy6: switch0phy6@7 {
+				reg = <0x7>;
+			};
+
+			switch0phy7: switch0phy7@8 {
+				reg = <0x8>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
new file mode 100644
index 000000000000..b795ad573891
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr-s4.dts
@@ -0,0 +1,84 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+#include "armada-385-clearfog-gtr.dtsi"
+
+/ {
+	model = "SolidRun Clearfog GTR S4";
+};
+
+&sfp0 {
+	tx-fault-gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+};
+
+&mdio {
+	switch0: switch0@4 {
+		compatible = "marvell,mv88e6085";
+		reg = <4>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_switch_reset_pins>;
+		reset-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-handle = <&switch0phy0>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan1";
+				phy-handle = <&switch0phy1>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-handle = <&switch0phy2>;
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan3";
+				phy-handle = <&switch0phy3>;
+			};
+
+			port@5 {
+				reg = <5>;
+				phy-mode = "2500base-x";
+				ethernet = <&eth1>;
+
+				fixed-link {
+					speed = <2500>;
+					full-duplex;
+				};
+			};
+
+		};
+
+		mdio {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch0phy0: switch0phy0@11 {
+				reg = <0x11>;
+			};
+
+			switch0phy1: switch0phy1@12 {
+				reg = <0x12>;
+			};
+
+			switch0phy2: switch0phy2@13 {
+				reg = <0x13>;
+			};
+
+			switch0phy3: switch0phy3@14 {
+				reg = <0x14>;
+			};
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
new file mode 100644
index 000000000000..d1452a04e904
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-clearfog-gtr.dtsi
@@ -0,0 +1,450 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Clearfog GTR machines rev 1.0 (88F6825)
+ *
+ *  Rabeeh Khoury <rabeeh@solid-run.com>, based on Russell King clearfog work
+ */
+
+/*
+	SERDES mapping -
+	0. SATA1 on CON18, or optionally mini PCIe CON3 - PCIe0
+	1. 6141 switch (2.5Gbps capable)
+	2. SATA0 on CON17, or optionally mini PCIe CON4 - PCIe1
+	3. USB 3.0 Host
+	4. mini PCIe CON2 - PCIe2
+	5. SFP connector, or optionally SGMII Ethernet 1512 PHY
+
+	USB 2.0 mapping -
+	0. USB 2.0 - 0 USB pins header CON12
+	1. USB 2.0 - 1 mini PCIe CON2
+	2. USB 2.0 - 2 to USB 3.0 connector (used with SERDES #3)
+
+	Pin mapping -
+	0,1 - console UART
+	2,3 - I2C0 - connected to I2C EEPROM, two temperature sensors,
+	      front panel and PSE controller
+	4,5 - MDC/MDIO
+	6..17 - RGMII
+	18 - Topaz switch reset (active low)
+	19 - 1512 phy reset
+	20 - 1512 phy reset (eth2, optional)
+	21,28,37,38,39,40 - SD0
+	22 - USB 3.0 current limiter enable (active high)
+	24 - SFP TX fault (input active high)
+	25 - SFP present (input active low)
+	26,27 - I2C1 - connected to SFP
+	29 - Fan PWM
+	30 - CON4 mini PCIe wifi disable
+	31 - CON3 mini PCIe wifi disable
+	32 - Fuse programming power toggle (1.8v)
+	33 - CON4 mini PCIe reset
+	34 - CON2 mini PCIe wifi disable
+	35 - CON3 mini PCIe reset
+	36 - Rear button (GPIO active low)
+	41 - CON1 front panel connector
+	42 - Front LED1, or front panel CON1
+	43 - Micron L-PBGA 24 ball SPI (1Gb) CS, or TPM SPI CS
+	44 - CON2 mini PCIe reset
+	45 - TPM PIRQ signal, or front panel CON1
+	46 - SFP TX disable
+	47 - Control isolation of boot sensitive SAR signals
+	48 - PSE reset
+	49 - PSE OSS signal
+	50 - PSE interrupt
+	52 - Front LED2, or front panel
+	53 - Front button
+	54 - SFP LOS (input active high)
+	55 - Fan sense
+	56(mosi),57(clk),58(miso) - SPI interface - 32Mb SPI, 1Gb SPI and TPM
+	59 - SPI 32Mb W25Q32BVZPIG CS0 chip select (bootable)
+*/
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	compatible = "marvell,armada385", "marvell,armada380";
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	v_usb3_con: regulator-v-usb3-con {
+		compatible = "regulator-fixed";
+		gpio = <&gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&cf_gtr_usb3_con_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3_con";
+		vin-supply = <&reg_5p0v>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			rtc@a3800 {
+				status = "okay";
+			};
+
+			i2c@11000 { /* ROM, temp sensor and front panel */
+				pinctrl-0 = <&i2c0_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			i2c@11100 { /* SFP (CON5/CON6) */
+				pinctrl-0 = <&cf_gtr_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				cf_gtr_switch_reset_pins: cf-gtr-switch-reset-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_usb3_con_vbus: cf-gtr-usb3-con-vbus {
+					marvell,pins = "mpp22";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_fan_pwm: cf-gtr-fan-pwm {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_i2c1_pins: i2c1-pins {
+					/* SFP */
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+
+				cf_gtr_sdhci_pins: cf-gtr-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+
+				cf_gtr_isolation_pins: cf-gtr-isolation-pins {
+					marvell,pins = "mpp47";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_poe_reset_pins: cf-gtr-poe-reset-pins {
+					marvell,pins = "mpp48";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+
+				cf_gtr_front_button_pins: cf-gtr-front-button-pins {
+					marvell,pins = "mpp53";
+					marvell,function = "gpio";
+				};
+
+				cf_gtr_rear_button_pins: cf-gtr-rear-button-pins {
+					marvell,pins = "mpp36";
+					marvell,function = "gpio";
+				};
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				no-1-8-v;
+				non-removable;
+				pinctrl-0 = <&cf_gtr_sdhci_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				vbus-supply = <&v_usb3_con>;
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@1,0 {
+				reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@2,0 {
+				reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+
+			pcie@3,0 {
+				reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp0: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&gpio0 25 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&cf_gtr_rear_button_pins &cf_gtr_front_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			label = "Rear Button";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+
+		button-1 {
+			label = "Front Button";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_1>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			function = LED_FUNCTION_CPU;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "2500base-x";
+	status = "okay";
+
+	fixed-link {
+		speed = <2500>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 1>;
+	phy-mode = "sgmii";
+	sfp = <&sfp0>;
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x1017>;
+		reg = <0>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	/*
+	 * CS0: W25Q32 flash
+	 */
+	pinctrl-0 = <&spi1_pins &cf_gtr_spi1_cs_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+		status = "okay";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* U26 temperature sensor placed near SoC */
+	temp1: nct75@4c {
+		compatible = "lm75";
+		reg = <0x4c>;
+	};
+
+	/* U27 temperature sensor placed near RTC battery */
+	temp2: nct75@4d {
+		compatible = "lm75";
+		reg = <0x4d>;
+	};
+
+	/* 2Kb eeprom */
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&ahci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-0 = <&cf_gtr_fan_pwm>;
+	pinctrl-names = "default";
+
+	wifi-disable {
+		gpio-hog;
+		gpios = <30 GPIO_ACTIVE_LOW>, <31 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "wifi-disable";
+	};
+};
+
+&gpio1 {
+	pinctrl-0 = <&cf_gtr_isolation_pins &cf_gtr_poe_reset_pins>;
+	pinctrl-names = "default";
+
+	lte-disable {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "lte-disable";
+	};
+
+	/*
+	 * This signal, when asserted, isolates Armada 38x sample at reset pins
+	 * from control of external devices. Should be de-asserted after reset.
+	 */
+	sar-isolation {
+		gpio-hog;
+		gpios = <15 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "sar-isolation";
+	};
+
+	poe-reset {
+		gpio-hog;
+		gpios = <16 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "poe-reset";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
new file mode 100644
index 000000000000..389d9c75d546
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-db-88f6820-amc.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 385 AMC board
+ * (DB-88F6820-AMC)
+ *
+ * Copyright (C) 2017 Allied Telesis Labs
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Marvell Armada 385 AMC";
+	compatible = "marvell,a385-db-amc", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		spi1 = &spi1;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&uart0 {
+	/*
+	 * Exported on the micro USB connector CON3
+	 * through an FTDI
+	 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+
+&eth0 {
+	pinctrl-names = "default";
+	/*
+	 * The Reference Clock 0 is used to provide a
+	 * clock to the PHY
+	 */
+	pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>;
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "rgmii-id";
+};
+
+&eth2 {
+	status = "okay";
+	phy = <&phy1>;
+	phy-mode = "sgmii";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+
+	phy0: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy1: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x40000000>;
+				label = "user";
+			};
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie1 {
+	/* Port 0, Lane 0 */
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				reg = <0x00000000 0x00100000>;
+				label = "u-boot";
+			};
+			partition@100000 {
+				reg = <0x00100000 0x00040000>;
+				label = "u-boot-env";
+			};
+		};
+	};
+};
+
+&refclk {
+	clock-frequency = <20000000>;
+};
diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts
index 89f5a95954ed..332f8fce77dc 100644
--- a/arch/arm/boot/dts/armada-385-db-ap.dts
+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for Marvell Armada 385 Access Point Development board
  * (DB-88F6820-AP)
@@ -5,38 +6,6 @@
  *  Copyright (C) 2014 Marvell
  *
  * Nadav Haklai <nadavh@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -46,7 +15,7 @@
 
 / {
 	model = "Marvell Armada 385 Access Point Development Board";
-	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x";
+	compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial1:115200n8";
@@ -59,23 +28,12 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi1: spi@10680 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <54000000>;
-				};
-			};
-
 			i2c0: i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
@@ -132,18 +90,31 @@
 				};
 			};
 
+			/* CON3 */
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
+				bm,pool-short = <3>;
 			};
 
+			/* CON2 */
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON4 */
 			ethernet@70000 {
 				pinctrl-names = "default";
 
@@ -155,19 +126,13 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <3>;
 			};
 
-			nfc: flash@d0000 {
+			bm@c8000 {
 				status = "okay";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				num-cs = <1>;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
 			};
 
 			usb3@f0000 {
@@ -176,7 +141,11 @@
 			};
 		};
 
-		pcie-controller {
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
 			status = "okay";
 
 			/*
@@ -203,6 +172,7 @@
 	usb3_phy: usb3_phy {
 		compatible = "usb-nop-xceiv";
 		vcc-supply = <&reg_xhci0_vbus>;
+		#phy-cells = <0>;
 	};
 
 	reg_xhci0_vbus: xhci0-vbus {
@@ -216,3 +186,53 @@
 		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 	};
 };
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <54000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00800000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00800000 0x00400000>;
+				read-only;
+			};
+
+			partition@c00000 {
+				label = "Root";
+				reg = <0x00c00000 0x3f400000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-caiman.dts b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
index f3cee918d285..88b2921fed55 100644
--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
@@ -1,40 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree include for the Linksys WRT1200AC (Caiman)
  *
  * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -44,71 +12,133 @@
 	model = "Linksys WRT1200AC";
 	compatible = "linksys,caiman", "linksys,armada385", "marvell,armada385",
 		     "marvell,armada380";
+};
 
-	soc {
-		internal-regs{
-			i2c@11000 {
-
-				pca9635@68 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-					wan_amber@0 {
-						label = "caiman:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "caiman:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "caiman:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "caiman:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					usb2@5 {
-						label = "caiman:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "caiman:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "caiman:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "caiman:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "caiman:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-		};
+&expander0 {
+	wan_amber@0 {
+		label = "caiman:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "caiman:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "caiman:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "caiman:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "caiman:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "caiman:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "caiman:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "caiman:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "caiman:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "caiman:white:power";
+	};
+
+	led-sata {
+		label = "caiman:white:sata";
 	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
 
-	gpio-leds {
-		power {
-			label = "caiman:white:power";
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
 		};
 
-		sata {
-			label = "caiman:white:sata";
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-cobra.dts b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
index 111071860559..88200f930d0d 100644
--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
@@ -1,40 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for the Linksys WRT1900ACv2 (Cobra)
  *
  * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -44,71 +12,133 @@
 	model = "Linksys WRT1900ACv2";
 	compatible = "linksys,cobra", "linksys,armada385", "marvell,armada385",
 		     "marvell,armada380";
+};
 
-	soc {
-		internal-regs{
-			i2c@11000 {
-
-				pca9635@68 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-					wan_amber@0 {
-						label = "cobra:amber:wan";
-						reg = <0x0>;
-					};
-
-					wan_white@1 {
-						label = "cobra:white:wan";
-						reg = <0x1>;
-					};
-
-					wlan_2g@2 {
-						label = "cobra:white:wlan_2g";
-						reg = <0x2>;
-					};
-
-					wlan_5g@3 {
-						label = "cobra:white:wlan_5g";
-						reg = <0x3>;
-					};
-
-					usb2@5 {
-						label = "cobra:white:usb2";
-						reg = <0x5>;
-					};
-
-					usb3_1@6 {
-						label = "cobra:white:usb3_1";
-						reg = <0x6>;
-					};
-
-					usb3_2@7 {
-						label = "cobra:white:usb3_2";
-						reg = <0x7>;
-					};
-
-					wps_white@8 {
-						label = "cobra:white:wps";
-						reg = <0x8>;
-					};
-
-					wps_amber@9 {
-						label = "cobra:amber:wps";
-						reg = <0x9>;
-					};
-				};
-			};
-		};
+&expander0 {
+	wan_amber@0 {
+		label = "cobra:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "cobra:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "cobra:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "cobra:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "cobra:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "cobra:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "cobra:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "cobra:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "cobra:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "cobra:white:power";
+	};
+
+	led-sata {
+		label = "cobra:white:sata";
 	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
 
-	gpio-leds {
-		power {
-			label = "cobra:white:power";
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
 		};
 
-		sata {
-			label = "cobra:white:sata";
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts
new file mode 100644
index 000000000000..4ab45f294de2
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
@@ -0,0 +1,176 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT3200ACM (Rango)
+ *
+ * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT3200ACM";
+	compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "rango:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "rango:white:wan";
+		reg = <0x1>;
+	};
+
+	usb2@5 {
+		label = "rango:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "rango:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "rango:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "rango:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "rango:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+		label = "rango:white:power";
+	};
+
+	led-sata {
+		gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		label = "rango:white:sata";
+	};
+
+	led-wlan_2g {
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_2g";
+	};
+
+	led-wlan_5g {
+		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+		label = "rango:white:wlan_5g";
+	};
+};
+
+&gpio_leds_pins {
+	marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
+};
+
+&nand {
+	/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u_env";
+			reg = <0x200000 0x20000>;    /* 128KiB */
+		};
+
+		partition@220000 {
+			label = "s_env";
+			reg = <0x220000 0x40000>;    /* 256KiB */
+		};
+
+		partition@7e0000 {
+			label = "devinfo";
+			reg = <0x7e0000 0x40000>;   /* 256KiB */
+			read-only;
+		};
+
+		partition@820000 {
+			label = "sysdiag";
+			reg = <0x820000 0x1e0000>;   /* 1920KiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x5000000>;  /* 80MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x4a00000>;  /* 74MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@5a00000 {
+			label = "kernel2";
+			reg = <0x5a00000 0x5000000>; /* 80MiB */
+		};
+
+		partition@6000000 {
+			label = "rootfs2";
+			reg = <0x6000000 0x4a00000>; /* 74MiB */
+		};
+
+		/*
+		 * 86MiB, last MiB is for the BBT, not writable
+		 */
+		partition@aa00000 {
+			label = "syscfg";
+			reg = <0xaa00000 0x5600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x260000 0x5c0000>;   /* 5.75MiB */
+		};
+	};
+};
+
+&sdhci {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhci_pins>;
+	no-1-8-v;
+	non-removable;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&usb3_1_vbus {
+	gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_1_vbus_pins {
+	marvell,pins = "mpp44";
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
new file mode 100644
index 000000000000..f1b1f22413f1
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Linksys WRT1900ACS (Shelby)
+ *
+ * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
+ */
+
+/dts-v1/;
+#include "armada-385-linksys.dtsi"
+
+/ {
+	model = "Linksys WRT1900ACS";
+	compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
+		     "marvell,armada380";
+};
+
+&expander0 {
+	wan_amber@0 {
+		label = "shelby:amber:wan";
+		reg = <0x0>;
+	};
+
+	wan_white@1 {
+		label = "shelby:white:wan";
+		reg = <0x1>;
+	};
+
+	wlan_2g@2 {
+		label = "shelby:white:wlan_2g";
+		reg = <0x2>;
+	};
+
+	wlan_5g@3 {
+		label = "shelby:white:wlan_5g";
+		reg = <0x3>;
+	};
+
+	usb2@5 {
+		label = "shelby:white:usb2";
+		reg = <0x5>;
+	};
+
+	usb3_1@6 {
+		label = "shelby:white:usb3_1";
+		reg = <0x6>;
+	};
+
+	usb3_2@7 {
+		label = "shelby:white:usb3_2";
+		reg = <0x7>;
+	};
+
+	wps_white@8 {
+		label = "shelby:white:wps";
+		reg = <0x8>;
+	};
+
+	wps_amber@9 {
+		label = "shelby:amber:wps";
+		reg = <0x9>;
+	};
+};
+
+&gpio_leds {
+	led-power {
+		label = "shelby:white:power";
+	};
+
+	led-sata {
+		label = "shelby:white:sata";
+	};
+};
+
+&nand {
+	/* 128MiB */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0000000 0x200000>;  /* 2MiB */
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u_env";
+			reg = <0x200000 0x40000>;    /* 256KiB */
+		};
+
+		partition@140000 {
+			label = "s_env";
+			reg = <0x240000 0x40000>;    /* 256KiB */
+		};
+
+		partition@900000 {
+			label = "devinfo";
+			reg = <0x900000 0x100000>;   /* 1MiB */
+			read-only;
+		};
+
+		/* kernel1 overlaps with rootfs1 by design */
+		partition@a00000 {
+			label = "kernel1";
+			reg = <0xa00000 0x2800000>;  /* 40MiB */
+		};
+
+		partition@1000000 {
+			label = "rootfs1";
+			reg = <0x1000000 0x2200000>;  /* 34MiB */
+		};
+
+		/* kernel2 overlaps with rootfs2 by design */
+		partition@3200000 {
+			label = "kernel2";
+			reg = <0x3200000 0x2800000>; /* 40MiB */
+		};
+
+		partition@3800000 {
+			label = "rootfs2";
+			reg = <0x3800000 0x2200000>; /* 34MiB */
+		};
+
+		/*
+		 * 38MiB, last MiB is for the BBT, not writable
+		 */
+		partition@5a00000 {
+			label = "syscfg";
+			reg = <0x5a00000 0x2600000>;
+		};
+
+		/*
+		 * Unused area between "s_env" and "devinfo".
+		 * Moved here because otherwise the renumbered
+		 * partitions would break the bootloader
+		 * supplied bootargs
+		 */
+		partition@180000 {
+			label = "unused_area";
+			reg = <0x280000 0x680000>;   /* 6.5MiB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index 74a9c6b54fa7..fc8216fd9f60 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -1,40 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree include file for Armada 385 based Linksys boards
  *
  * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -52,229 +20,153 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x20000000>; /* 512 MiB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
-
-		internal-regs {
-
-			spi@10600 {
-				status = "disabled";
-			};
-
-			i2c@11000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins>;
-				status = "okay";
-
-				tmp421@4c {
-					compatible = "ti,tmp421";
-					reg = <0x4c>;
-				};
-
-				pca9635@68 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "nxp,pca9635";
-					reg = <0x68>;
-				};
-			};
-
-			/* J10: VCC, NC, RX, NC, TX, GND  */
-			serial@12000 {
-				status = "okay";
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy-mode = "rgmii-id";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			ethernet@34000 {
-				status = "okay";
-				phy-mode = "sgmii";
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-
-			mdio {
-				status = "okay";
-			};
-
-			sata@a8000 {
-				status = "okay";
-			};
-
-			/* USB part of the eSATA/USB 2.0 port */
-			usb@50000 {
-				status = "okay";
-			};
-
-			usb3@f8000 {
-				status = "okay";
-				usb-phy = <&usb3_phy>;
-			};
-
-			flash@d0000 {
-				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x200000>;  /* 2MB */
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u_env";
-					reg = <0x200000 0x40000>;    /* 256KB */
-				};
-
-				partition@140000 {
-					label = "s_env";
-					reg = <0x240000 0x40000>;    /* 256KB */
-				};
-
-				partition@900000 {
-					label = "devinfo";
-					reg = <0x900000 0x100000>;   /* 1MB */
-					read-only;
-				};
-
-				/* kernel1 overlaps with rootfs1 by design */
-				partition@a00000 {
-					label = "kernel1";
-					reg = <0xa00000 0x2800000>;  /* 40MB */
-				};
-
-				partition@1000000 {
-					label = "rootfs1";
-					reg = <0x1000000 0x2200000>;  /* 34MB */
-				};
-
-				/* kernel2 overlaps with rootfs2 by design */
-				partition@3200000 {
-					label = "kernel2";
-					reg = <0x3200000 0x2800000>; /* 40MB */
-				};
-
-				partition@3800000 {
-					label = "rootfs2";
-					reg = <0x3800000 0x2200000>; /* 34MB */
-				};
-
-				/*
-				 * 38MB, last MB is for the BBT, not writable
-				 */
-				partition@5a00000 {
-					label = "syscfg";
-					reg = <0x5a00000 0x2600000>;
-				};
-
-				/*
-				 * Unused area between "s_env" and "devinfo".
-				 * Moved here because otherwise the renumbered
-				 * partitions would break the bootloader
-				 * supplied bootargs
-				 */
-				partition@180000 {
-					label = "unused_area";
-					reg = <0x280000 0x680000>;   /* 6.5MB */
-				};
-			};
-		};
-
-		pcie-controller {
-			status = "okay";
-
-			pcie@1,0 {
-				/* Marvell 88W8864, 5GHz-only */
-				status = "okay";
-			};
-
-			pcie@2,0 {
-				/* Marvell 88W8864, 2GHz-only */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 	};
 
-	usb3_phy: usb3_phy {
+	usb3_1_phy: usb3_1-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&reg_xhci0_vbus>;
+		vcc-supply = <&usb3_1_vbus>;
+		#phy-cells = <0>;
 	};
 
-	reg_xhci0_vbus: xhci0-vbus {
+	usb3_1_vbus: usb3_1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
-		pinctrl-0 = <&xhci0_vbus_pins>;
-		regulator-name = "xhci0-vbus";
+		pinctrl-0 = <&usb3_1_vbus_pins>;
+		regulator-name = "usb3_1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
 	};
 
-	gpio_keys {
+	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-0 = <&keys_pin>;
+		pinctrl-0 = <&gpio_keys_pins>;
 		pinctrl-names = "default";
 
-		button@1 {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 		};
 	};
 
-	gpio-leds {
+	gpio_leds: gpio-leds {
 		compatible = "gpio-leds";
-		pinctrl-0 = <&power_led_pin &sata_led_pin>;
+		pinctrl-0 = <&gpio_leds_pins>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 
-		sata {
-			gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+		led-sata {
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
 			default-state = "off";
+			linux,default-trigger = "disk-activity";
 		};
 	};
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&eth2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
 
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	expander0: pca9635@68 {
+		#address-cells = <1>;
 		#size-cells = <0>;
+		compatible = "nxp,pca9635";
+		reg = <0x68>;
+	};
+};
 
-		dsa,ethernet = <&eth2>;
-		dsa,mii-bus = <&mdio>;
+&nand_controller {
+	/* 128MiB or 256MiB */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	nand: nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+	};
+};
 
-		switch@0 {
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x0 0>;	/* MDIO address 0, switch 0 in tree */
 
 			port@0 {
 				reg = <0>;
@@ -303,30 +195,71 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "sgmii";
+				ethernet = <&eth2>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 		};
 	};
 };
 
-&pinctrl {
-	keys_pin: keys-pin {
-		marvell,pins = "mpp24", "mpp47";
-		marvell,function = "gpio";
-	};
+&pciec {
+	status = "okay";
+};
 
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp55";
+&pcie1 {
+	/* Marvell 88W8864, 5GHz-only */
+	status = "okay";
+};
+
+&pcie2 {
+	/* Marvell 88W8864, 2GHz-only */
+	status = "okay";
+};
+
+&pinctrl {
+	gpio_keys_pins: gpio-keys-pins {
+		/* mpp24: wps, mpp29: reset */
+		marvell,pins = "mpp24", "mpp29";
 		marvell,function = "gpio";
 	};
 
-	sata_led_pin: sata-led-pin {
-		marvell,pins = "mpp54";
+	gpio_leds_pins: gpio-leds-pins {
+		/* mpp54: sata, mpp55: power */
+		marvell,pins = "mpp54", "mpp55";
 		marvell,function = "gpio";
 	};
 
-	xhci0_vbus_pins: xhci0-vbus-pins {
+	usb3_1_vbus_pins: usb3_1-vbus-pins {
 		marvell,pins = "mpp50";
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "disabled";
+};
+
+&uart0 {
+	/* J10: VCC, NC, RX, NC, TX, GND  */
+	status = "okay";
+};
+
+&usb0 {
+	/* USB part of the eSATA/USB 2.0 port */
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+	usb-phy = <&usb3_1_phy>;
+};
+
+&rtc {
+	/* No crystal connected to the internal RTC */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
new file mode 100644
index 000000000000..ea91ff964d94
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -0,0 +1,292 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Synology DS116 NAS
+ *
+ * Copyright (C) 2017 Willy Tarreau <w@1wt.eu>
+ */
+
+/dts-v1/;
+#include "armada-385.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Synology DS116";
+	compatible = "marvell,a385-gp", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c0_pins>;
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart0_pins>;
+				status = "okay";
+			};
+
+			serial@12100 {
+				/* A PIC16F1829 is connected to uart1 at 9600 bps,
+				 * and takes single-character orders :
+				 *   "1" : power off // already handled by the poweroff node
+				 *   "2" : short beep
+				 *   "3" : long beep
+				 *   "4" : turn the power LED ON
+				 *   "5" : flash the power LED
+				 *   "6" : turn the power LED OFF
+				 *   "7" : turn the status LED OFF
+				 *   "8" : turn the status LED ON
+				 *   "9" : flash the status LED
+				 *   "A" : flash the motherboard LED (D8)
+				 *   "B" : turn the motherboard LED OFF
+				 *   "C" : hard reset
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&uart1_pins>;
+				status = "okay";
+			};
+
+			poweroff@12100 {
+				compatible = "synology,power-off";
+				reg = <0x12100 0x100>;
+				clocks = <&coreclk 0>;
+			};
+
+			ethernet@70000 {
+				pinctrl-names = "default";
+				phy = <&phy0>;
+				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				status = "okay";
+			};
+
+
+			mdio@72004 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&mdio_pins>;
+
+				phy0: ethernet-phy@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@a8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sata0_pins>;
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+					target-supply = <&reg_5v_sata0>;
+				};
+			};
+
+			bm@c8000 {
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				usb-phy = <&usb3_0_phy>;
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				usb-phy = <&usb3_1_phy>;
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
+		};
+
+		gpio-fan {
+			compatible = "gpio-fan";
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 16 GPIO_ACTIVE_HIGH>;
+			gpio-fan,speed-map = <   0 0
+					      1500 1
+					      2500 2
+					      3000 3
+					      3400 4
+					      3700 5
+					      3900 6
+					      4000 7>;
+			#cooling-cells = <2>;
+		};
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			/* The green part is on gpio0.20 which is also used by
+			 * sata0, and accesses to SATA disk 0 make it blink so it
+			 * doesn't need to be declared here.
+			 */
+			led-orange {
+				gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+				label = "ds116:orange:disk";
+				default-state = "off";
+			};
+		};
+	};
+
+	usb3_0_phy: usb3_0_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_0_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_1_phy: usb3_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	reg_usb3_0_vbus: usb3-vbus0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci0_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb3_1_vbus: usb3-vbus1 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb3-vbus1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&xhci1_vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_sata0: pwr-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		enable-active-high;
+		regulator-boot-on;
+		gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_5v_sata0: v5-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v5.0-sata0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_sata0>;
+	};
+
+	reg_12v_sata0: v12-sata0 {
+		compatible = "regulator-fixed";
+		regulator-name = "v12.0-sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_sata0>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "macronix,mx25l6405d", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+
+		/* Note: there is a redboot partition table despite u-boot
+		 * being used. The names presented here are the same as those
+		 * found in the FIS directory. There is also a small device
+		 * tree in the last 64kB of the RedBoot partition which is not
+		 * enumerated. The MAC address and the serial number are listed
+		 * in the "vendor" partition.
+		 */
+		partition@0 {
+			label = "RedBoot";
+			reg = <0x00000000 0x000f0000>;
+			read-only;
+		};
+
+		partition@c0000 {
+			label = "zImage";
+			reg = <0x000f0000 0x002d0000>;
+		};
+
+		partition@390000 {
+			label = "rd.gz";
+			reg = <0x003c0000 0x00410000>;
+		};
+
+		partition@7d0000 {
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>;
+			read-only;
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&pinctrl {
+	/* use only one pin for UART1, as mpp20 is used by sata0 */
+	uart1_pins: uart-pins-1 {
+		marvell,pins = "mpp19";
+		marvell,function = "ua1";
+	};
+
+	xhci0_vbus_pins: xhci0_vbus_pins {
+		marvell,pins = "mpp58";
+		marvell,function = "gpio";
+	};
+	xhci1_vbus_pins: xhci1_vbus_pins {
+		marvell,pins = "mpp59";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-385-turris-omnia.dts b/arch/arm/boot/dts/armada-385-turris-omnia.dts
new file mode 100644
index 000000000000..2d8d319bec83
--- /dev/null
+++ b/arch/arm/boot/dts/armada-385-turris-omnia.dts
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for the Turris Omnia
+ *
+ * Copyright (C) 2016 Uwe Kleine-König <uwe@kleine-koenig.org>
+ * Copyright (C) 2016 Tomas Hlavacek <tmshlvkc@gmail.com>
+ *
+ * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Turris Omnia";
+	compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380";
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1024 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+
+			/* USB part of the PCIe2/USB 2.0 port */
+			usb@58000 {
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&sdhci_pins>;
+				status = "okay";
+
+				bus-width = <8>;
+				no-1-8-v;
+				non-removable;
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+
+			pcie@3,0 {
+				/* Port 2, Lane 0 */
+				status = "okay";
+				slot-power-limit-milliwatt = <10000>;
+			};
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&sfp_i2c>;
+		tx-fault-gpios = <&pcawan 0 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&pcawan 1 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&pcawan 2 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&pcawan 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pcawan 4 GPIO_ACTIVE_LOW>;
+		maximum-power-milliwatt = <3000>;
+
+		/*
+		 * For now this has to be enabled at boot time by U-Boot when
+		 * a SFP module is present. Read more in the comment in the
+		 * eth2 node below.
+		 */
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+		simple-audio-card,format = "i2s";
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio_controller 1>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_out>;
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&audio_controller {
+	/* Pin header U16, GPIO51 in SPDIFO mode */
+	pinctrl-0 = <&spdif_pins>;
+	pinctrl-names = "default";
+	spdif-mode;
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+/* Connected to 88E6176 switch, port 6 */
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <3>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* Connected to 88E6176 switch, port 5 */
+&eth1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ge1_rgmii_pins>;
+	status = "okay";
+	phy-mode = "rgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <1>;
+	bm,pool-short = <3>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+/* WAN port */
+&eth2 {
+	/*
+	 * eth2 is connected via a multiplexor to both the SFP cage and to
+	 * ethernet-phy@1. The multiplexor switches the signal to SFP cage when
+	 * a SFP module is present, as determined by the mode-def0 GPIO.
+	 *
+	 * Until kernel supports this configuration properly, in case SFP module
+	 * is present, U-Boot has to enable the sfp node above, remove phy
+	 * handle and add managed = "in-band-status" property.
+	 */
+	status = "okay";
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	phys = <&comphy5 2>;
+	sfp = <&sfp>;
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	bm,pool-short = <3>;
+	label = "wan";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+
+	i2cmux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			/* STM32F0 command interface at address 0x2a */
+
+			led-controller@2b {
+				compatible = "cznic,turris-omnia-leds";
+				reg = <0x2b>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				/*
+				 * LEDs are controlled by MCU (STM32F0) at
+				 * address 0x2b.
+				 *
+				 * LED functions are not stable yet:
+				 * - there are 3 LEDs connected via MCU to PCIe
+				 *   ports. One of these ports supports mSATA.
+				 *   There is no mSATA nor PCIe function.
+				 *   For now we use LED_FUNCTION_WLAN, since
+				 *   in most cases users have wifi cards in
+				 *   these slots
+				 * - there are 2 LEDs dedicated for user: A and
+				 *   B. Again there is no such function defined.
+				 *   For now we use LED_FUNCTION_INDICATOR
+				 */
+
+				multi-led@0 {
+					reg = <0x0>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_INDICATOR;
+					function-enumerator = <2>;
+				};
+
+				multi-led@1 {
+					reg = <0x1>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_INDICATOR;
+					function-enumerator = <1>;
+				};
+
+				multi-led@2 {
+					reg = <0x2>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <3>;
+				};
+
+				multi-led@3 {
+					reg = <0x3>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <2>;
+				};
+
+				multi-led@4 {
+					reg = <0x4>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WLAN;
+					function-enumerator = <1>;
+				};
+
+				multi-led@5 {
+					reg = <0x5>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_WAN;
+				};
+
+				multi-led@6 {
+					reg = <0x6>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <4>;
+				};
+
+				multi-led@7 {
+					reg = <0x7>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <3>;
+				};
+
+				multi-led@8 {
+					reg = <0x8>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <2>;
+				};
+
+				multi-led@9 {
+					reg = <0x9>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <1>;
+				};
+
+				multi-led@a {
+					reg = <0xa>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_LAN;
+					function-enumerator = <0>;
+				};
+
+				multi-led@b {
+					reg = <0xb>;
+					color = <LED_COLOR_ID_RGB>;
+					function = LED_FUNCTION_POWER;
+				};
+			};
+
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+
+				/* The EEPROM contains data for bootloader.
+				 * Contents:
+				 * 	struct omnia_eeprom {
+				 * 		u32 magic; (=0x0341a034 in LE)
+				 *		u32 ramsize; (in GiB)
+				 * 		char regdomain[4];
+				 * 		u32 crc32;
+				 * 	};
+				 */
+			};
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			/* routed to PCIe0/mSATA connector (CN7A) */
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			/* routed to PCIe1/USB2 connector (CN61A) */
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			/* routed to PCIe2 connector (CN62A) */
+		};
+
+		sfp_i2c: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			/* routed to SFP+ */
+		};
+
+		i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			/* ATSHA204A-MAHDA-T crypto module */
+			crypto@64 {
+				compatible = "atmel,atsha204a";
+				reg = <0x64>;
+			};
+		};
+
+		i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			/* exposed on pin header */
+		};
+
+		i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			pcawan: gpio@71 {
+				/*
+				 * GPIO expander for SFP+ signals and
+				 * and phy irq
+				 */
+				compatible = "nxp,pca9538";
+				reg = <0x71>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&pcawan_pins>;
+
+				interrupt-parent = <&gpio1>;
+				interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>,
+				   <3 16 0xfff0 0x0001>;
+
+		/* irq is connected to &pcawan pin 7 */
+	};
+
+	/* Switch MV88E6176 at address 0x10 */
+	switch@10 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&swint_pins>;
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dsa,member = <0 0>;
+		reg = <0x10>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ports@0 {
+				reg = <0>;
+				label = "lan0";
+			};
+
+			ports@1 {
+				reg = <1>;
+				label = "lan1";
+			};
+
+			ports@2 {
+				reg = <2>;
+				label = "lan2";
+			};
+
+			ports@3 {
+				reg = <3>;
+				label = "lan3";
+			};
+
+			ports@4 {
+				reg = <4>;
+				label = "lan4";
+			};
+
+			ports@5 {
+				reg = <5>;
+				ethernet = <&eth1>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			ports@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	pcawan_pins: pcawan-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	swint_pins: swint-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "gpio";
+	};
+
+	spi0cs0_pins: spi0cs0-pins {
+		marvell,pins = "mpp25";
+		marvell,function = "spi0";
+	};
+
+	spi0cs2_pins: spi0cs2-pins {
+		marvell,pins = "mpp26";
+		marvell,function = "spi0";
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins &spi0cs0_pins>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "spansion,s25fl164k", "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				reg = <0x0 0x00100000>;
+				label = "U-Boot";
+			};
+
+			partition@100000 {
+				reg = <0x00100000 0x00700000>;
+				label = "Rescue system";
+			};
+		};
+	};
+
+	/* MISO, MOSI, SCLK and CS2 are routed to pin header CN11 */
+};
+
+&uart0 {
+	/* Pin header CN10 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	/* Pin header CN11 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index 8e67d2c083dd..be8d607c59b2 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 385 SoC.
  *
@@ -6,44 +7,6 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "armada-38x.dtsi"
@@ -70,13 +33,7 @@
 	};
 
 	soc {
-		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6820-pinctrl";
-			};
-		};
-
-		pcie-controller {
+		pciec: pcie {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -106,79 +63,123 @@
 			 * configured in x4 by the bootloader, then
 			 * pcie@4,0 is not available.
 			 */
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
 			 * x1 port only available when pcie@1,0 is
 			 * configured as a x1 port
 			 */
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 	};
 };
+
+&pinctrl {
+	compatible = "marvell,mv88f6820-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-base.dts b/arch/arm/boot/dts/armada-388-clearfog-base.dts
new file mode 100644
index 000000000000..f7daa3bc707e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog Base A1";
+	compatible = "solidrun,clearfog-base-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	phy = <&phy1>;
+};
+
+&gpio0 {
+	phy1_reset {
+		gpio-hog;
+		gpios = <19 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "phy1-reset";
+	};
+};
+
+&mdio {
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins &clearfog_phy_pins>;
+	phy1: ethernet-phy@1 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <1>;
+	};
+};
+
+&pinctrl {
+	/* phy1 reset */
+	clearfog_phy_pins: clearfog-phy-pins {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp44";
+		marvell,function = "gpio";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog-pro.dts b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
new file mode 100644
index 000000000000..ff890c09c3ed
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog-pro.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include "armada-388-clearfog.dts"
+
+/ {
+	model = "SolidRun Clearfog Pro A1";
+	compatible = "solidrun,clearfog-pro-a1",
+		"solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts
new file mode 100644
index 000000000000..95299167dcf5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+/dts-v1/;
+#include "armada-388-clearfog.dtsi"
+
+/ {
+	model = "SolidRun Clearfog A1";
+	compatible = "solidrun,clearfog-a1", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	soc {
+		internal-regs {
+			usb3@f0000 {
+				/* CON2, nearest CPU, USB2 only. */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			pcie@3,0 {
+				/* Port 2, Lane 0. CON2, nearest CPU. */
+				reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&rear_button_pins>;
+		pinctrl-names = "default";
+
+		button-0 {
+			/* The rear SW3 button */
+			label = "Rear Button";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			linux,can-disable;
+			linux,code = <BTN_0>;
+		};
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&expander0 {
+	/*
+	 * PCA9655 GPIO expander:
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-CON2 PERST#
+	 *  3-CON3 W_DISABLE
+	 *  4-CON2 CLKREQ#
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-CON2 W_DISABLE
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	pcie2-0-clkreq-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_LOW>;
+		input;
+		line-name = "pcie2.0-clkreq";
+	};
+	pcie2-0-w-disable-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "pcie2.0-w-disable";
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@4 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <4>;
+		pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&eth1>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				/* 88E1512 external phy */
+				reg = <6>;
+				label = "lan6";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&pinctrl {
+	clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
+		marvell,pins = "mpp46";
+		marvell,function = "ref";
+	};
+	clearfog_dsa0_pins: clearfog-dsa0-pins {
+		marvell,pins = "mpp23", "mpp41";
+		marvell,function = "gpio";
+	};
+	clearfog_spi1_cs_pins: spi1-cs-pins {
+		marvell,pins = "mpp55";
+		marvell,function = "spi1";
+	};
+	rear_button_pins: rear-button-pins {
+		marvell,pins = "mpp34";
+		marvell,function = "gpio";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1:
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
+};
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
new file mode 100644
index 000000000000..f8a06ae4a3c9
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -0,0 +1,245 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree include file for SolidRun Clearfog 88F6828 based boards
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+		ethernet2 = &eth1;
+		ethernet3 = &eth2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	soc {
+		internal-regs {
+			sata@a8000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sata@e0000 {
+				/* pinctrl? */
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&microsom_sdhci_pins
+					     &clearfog_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc-supply = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				/* CON3, nearest  power. */
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				/* CON7 */
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * the mini-PCIe connectors on the board.
+			 */
+			pcie@2,0 {
+				/* Port 1, Lane 0. CON3, nearest power. */
+				reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
+				status = "okay";
+			};
+		};
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c1>;
+		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
+		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
+		maximum-power-milliwatt = <2000>;
+	};
+};
+
+&eth1 {
+	/* ethernet@30000 */
+	bm,pool-long = <2>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	phys = <&comphy1 1>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&eth2 {
+	/* ethernet@34000 */
+	bm,pool-long = <3>;
+	bm,pool-short = <1>;
+	buffer-manager = <&bm>;
+	managed = "in-band-status";
+	phys = <&comphy5 2>;
+	phy-mode = "sgmii";
+	sfp = <&sfp>;
+	status = "okay";
+};
+
+&i2c0 {
+	/*
+	 * PCA9655 GPIO expander, up to 1MHz clock.
+	 *  0-CON3 CLKREQ#
+	 *  1-CON3 PERST#
+	 *  2-
+	 *  3-CON3 W_DISABLE
+	 *  4-
+	 *  5-USB3 overcurrent
+	 *  6-USB3 power
+	 *  7-
+	 *  8-JP4 P1
+	 *  9-JP4 P4
+	 * 10-JP4 P5
+	 * 11-m.2 DEVSLP
+	 * 12-SFP_LOS
+	 * 13-SFP_TX_FAULT
+	 * 14-SFP_TX_DISABLE
+	 * 15-SFP_MOD_DEF0
+	 */
+	expander0: gpio-expander@20 {
+		/*
+		 * This is how it should be:
+		 * compatible = "onnn,pca9655", "nxp,pca9555";
+		 * but you can't do this because of the way I2C works.
+		 */
+		compatible = "nxp,pca9555";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x20>;
+
+		pcie1-0-clkreq-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "pcie1.0-clkreq";
+		};
+		pcie1-0-w-disable-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "pcie1.0-w-disable";
+		};
+		usb3-ilimit-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "usb3-current-limit";
+		};
+		usb3-power-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "usb3-power";
+		};
+		m2-devslp-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "m.2 devslp";
+		};
+	};
+
+	/* The MCP3021 supports standard and fast modes */
+	mikrobus_adc: mcp3021@4c {
+		compatible = "microchip,mcp3021";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c1 {
+	/*
+	 * Routed to SFP, mikrobus, and PCIe.
+	 * SFP limits this to 100kHz, and requires an AT24C01A/02/04 with
+	 *  address pins tied low, which takes addresses 0x50 and 0x51.
+	 * Mikrobus doesn't specify beyond an I2C bus being present.
+	 * PCIe uses ARP to assign addresses, or 0x63-0x64.
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&clearfog_i2c1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl {
+	clearfog_i2c1_pins: i2c1-pins {
+		/* SFP, PCIe, mSATA, mikrobus */
+		marvell,pins = "mpp26", "mpp27";
+		marvell,function = "i2c1";
+	};
+	clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+	mikro_pins: mikro-pins {
+		/* int: mpp22 rst: mpp29 */
+		marvell,pins = "mpp22", "mpp29";
+		marvell,function = "gpio";
+	};
+	mikro_spi_pins: mikro-spi-pins {
+		marvell,pins = "mpp43";
+		marvell,function = "spi1";
+	};
+	mikro_uart_pins: mikro-uart-pins {
+		marvell,pins = "mpp24", "mpp25";
+		marvell,function = "ua1";
+	};
+};
+
+&spi1 {
+	/*
+	 * Add SPI CS pins for clearfog:
+	 * CS0: W25Q32
+	 * CS1: PIC microcontroller (Pro models)
+	 * CS2: mikrobus
+	 */
+	pinctrl-0 = <&spi1_pins &mikro_spi_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	/* mikrobus uart */
+	pinctrl-0 = <&mikro_uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts
index 91ac8c118f37..45cc784659fd 100644
--- a/arch/arm/boot/dts/armada-388-db.dts
+++ b/arch/arm/boot/dts/armada-388-db.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada 388 evaluation board
  * (DB-88F6820)
@@ -5,44 +6,6 @@
  *  Copyright (C) 2014 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -64,24 +27,20 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "w25q32", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
+				audio_codec: audio-codec@4a {
+					#sound-dai-cells = <0>;
+					compatible = "cirrus,cs42l51";
+					reg = <0x4a>;
+				};
 			};
 
 			i2c@11100 {
@@ -97,16 +56,22 @@
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			usb@58000 {
-				status = "ok";
+				status = "okay";
 			};
 
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 			mdio@72004 {
@@ -127,27 +92,8 @@
 				status = "okay";
 			};
 
-			flash@d0000 {
+			bm@c8000 {
 				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
 			};
 
 			sdhci@d8000 {
@@ -158,6 +104,12 @@
 				no-1-8-v;
 			};
 
+			audio-controller@e8000 {
+				pinctrl-0 = <&i2s_pins>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 			usb3@f0000 {
 				status = "okay";
 			};
@@ -167,7 +119,11 @@
 			};
 		};
 
-		pcie-controller {
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
 			status = "okay";
 			/*
 			 * The two PCIe units are accessible through
@@ -183,4 +139,107 @@
 			};
 		};
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Armada 385 DB Audio";
+		simple-audio-card,mclk-fs = <256>;
+		simple-audio-card,widgets =
+			"Headphone", "Out Jack",
+			"Line", "In Jack";
+		simple-audio-card,routing =
+			"Out Jack", "HPL",
+			"Out Jack", "HPR",
+			"AIN1L", "In Jack",
+			"AIN1R", "In Jack";
+		status = "disabled";
+
+		simple-audio-card,dai-link@0 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 0>;
+			};
+
+			codec {
+				sound-dai = <&audio_codec>;
+			};
+		};
+
+		simple-audio-card,dai-link@1 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+
+		simple-audio-card,dai-link@2 {
+			format = "i2s";
+			cpu {
+				sound-dai = <&audio_controller 1>;
+			};
+
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
index fd4f6fd8a2e8..e2ba50520b6b 100644
--- a/arch/arm/boot/dts/armada-388-gp.dts
+++ b/arch/arm/boot/dts/armada-388-gp.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for Marvell Armada 385 development board
  * (RD-88F6820-GP)
@@ -5,38 +6,6 @@
  * Copyright (C) 2014 Marvell
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -44,8 +13,8 @@
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Marvell Armada 385 GP";
-	compatible = "marvell,a385-gp", "marvell,armada388", "marvell,armada380";
+	model = "Marvell Armada 388 DB-88F6820-GP";
+	compatible = "marvell,a388-gp", "marvell,armada388", "marvell,armada380";
 
 	chosen {
 		stdout-path = "serial0:115200n8";
@@ -58,40 +27,24 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
-			spi@10600 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins>;
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <50000000>;
-					m25p,fast-read;
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins>;
 				status = "okay";
 				clock-frequency = <100000>;
-				/*
-				 * The EEPROM located at adresse 54 is needed
-				 * for the boot - DO NOT ERASE IT -
-				 */
 
 				expander0: pca9555@20 {
 					compatible = "nxp,pca9555";
 					pinctrl-names = "default";
 					pinctrl-0 = <&pca0_pins>;
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -103,7 +56,7 @@
 					compatible = "nxp,pca9555";
 					pinctrl-names = "default";
 					interrupt-parent = <&gpio0>;
-					interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
 					gpio-controller;
 					#gpio-cells = <2>;
 					interrupt-controller;
@@ -111,6 +64,10 @@
 					reg = <0x21>;
 				};
 
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
 			};
 
 			serial@12000 {
@@ -131,6 +88,9 @@
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 			};
 
 			/* CON4 */
@@ -150,6 +110,9 @@
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 			};
 
 
@@ -184,6 +147,10 @@
 				};
 			};
 
+			bm@c8000 {
+				status = "okay";
+			};
+
 			sata@e0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&sata2_pins>, <&sata3_pins>;
@@ -205,8 +172,21 @@
 			sdhci@d8000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&sdhci_pins>;
-				cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
 				no-1-8-v;
+				/*
+				 * A388-GP board v1.5 and higher replace
+				 * hitherto card detection method based on GPIO
+				 * with the one using DAT3 pin. As they are
+				 * incompatible, software-based polling is
+				 * enabled with 'broken-cd' property. For boards
+				 * older than v1.5 it can be replaced with:
+				 * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;',
+				 * whereas for the newer ones following can be
+				 * used instead:
+				 * 'dat3-cd;'
+				 * 'cd-inverted;'
+				 */
+				broken-cd;
 				wp-inverted;
 				bus-width = <8>;
 				status = "okay";
@@ -214,18 +194,22 @@
 
 			/* CON5 */
 			usb3@f0000 {
-				vcc-supply = <&reg_usb2_1_vbus>;
+				usb-phy = <&usb2_1_phy>;
 				status = "okay";
 			};
 
 			/* CON7 */
 			usb3@f8000 {
-				vcc-supply = <&reg_usb3_vbus>;
+				usb-phy = <&usb3_phy>;
 				status = "okay";
 			};
 		};
 
-		pcie-controller {
+		bm-bppi {
+			status = "okay";
+		};
+
+		pcie {
 			status = "okay";
 			/*
 			 * One PCIe units is accessible through
@@ -258,13 +242,24 @@
 		};
 	};
 
+	usb2_1_phy: usb2_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb2_1_vbus>;
+		#phy-cells = <0>;
+	};
+
+	usb3_phy: usb3_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_usb3_vbus>;
+		#phy-cells = <0>;
+	};
+
 	reg_usb3_vbus: usb3-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "usb3-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander1 15 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -284,26 +279,17 @@
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
-		regulator-always-on;
-		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
-	};
-
-	reg_usb2_1_vbus: v5-vbus1 {
-		compatible = "regulator-fixed";
-		regulator-name = "v5.0-vbus1";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		enable-active-high;
-		regulator-always-on;
 		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_sata0: pwr-sata0 {
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
-
+		regulator-boot-on;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
 	};
 
 	reg_5v_sata0: v5-sata0 {
@@ -311,7 +297,6 @@
 		regulator-name = "v5.0-sata0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -320,7 +305,6 @@
 		regulator-name = "v12.0-sata0";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata0>;
 	};
 
@@ -330,7 +314,7 @@
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -339,7 +323,6 @@
 		regulator-name = "v5.0-sata1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -348,7 +331,6 @@
 		regulator-name = "v12.0-sata1";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata1>;
 	};
 
@@ -356,7 +338,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata2";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 11 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -365,7 +347,6 @@
 		regulator-name = "v5.0-sata2";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -374,7 +355,6 @@
 		regulator-name = "v12.0-sata2";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata2>;
 	};
 
@@ -382,7 +362,7 @@
 		compatible = "regulator-fixed";
 		regulator-name = "pwr_en_sata3";
 		enable-active-high;
-		regulator-always-on;
+		regulator-boot-on;
 		gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
 	};
 
@@ -391,7 +371,6 @@
 		regulator-name = "v5.0-sata3";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 
@@ -400,7 +379,6 @@
 		regulator-name = "v12.0-sata3";
 		regulator-min-microvolt = <12000000>;
 		regulator-max-microvolt = <12000000>;
-		regulator-always-on;
 		vin-supply = <&reg_sata3>;
 	};
 };
@@ -411,3 +389,18 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <50000000>;
+		m25p,fast-read;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
new file mode 100644
index 000000000000..ec134e22bae3
--- /dev/null
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
@@ -0,0 +1,324 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Helios4
+ * based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
+ *
+ *  Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
+ *
+ */
+
+/dts-v1/;
+#include "armada-388.dtsi"
+#include "armada-38x-solidrun-microsom.dtsi"
+
+/ {
+	model = "Helios4";
+	compatible = "kobol,helios4", "marvell,armada388",
+		"marvell,armada385", "marvell,armada380";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	aliases {
+		/* So that mvebu u-boot can update the MAC addresses */
+		ethernet1 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_12v: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_brick_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_hdd: regulator-5v-hdd {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HDD";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_12v>;
+	};
+
+	reg_5p0v_usb: regulator-5v-usb {
+		compatible = "regulator-fixed";
+		regulator-name = "USB-PWR";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		enable-active-high;
+		gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&reg_12v>;
+	};
+
+	system-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_system_led_pins>;
+
+		status-led {
+			label = "helios4:green:status";
+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		fault-led {
+			label = "helios4:red:fault";
+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+	};
+
+	io-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_io_led_pins>;
+
+		sata1-led {
+			label = "helios4:green:ata1";
+			gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata1";
+			default-state = "off";
+		};
+		sata2-led {
+			label = "helios4:green:ata2";
+			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata2";
+			default-state = "off";
+		};
+		sata3-led {
+			label = "helios4:green:ata3";
+			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata3";
+			default-state = "off";
+		};
+		sata4-led {
+			label = "helios4:green:ata4";
+			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "ata4";
+			default-state = "off";
+		};
+		usb-led {
+			label = "helios4:green:usb";
+			gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usb-host";
+			default-state = "off";
+		};
+	};
+
+	fan1: j10-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 9 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan1_pins>;
+	};
+
+	fan2: j17-pwm {
+		compatible = "pwm-fan";
+		pwms = <&gpio1 23 40000>;	/* Target freq:25 kHz */
+		pinctrl-names = "default";
+		pinctrl-0 = <&helios_fan2_pins>;
+	};
+
+	usb2_phy: usb2-phy {
+		compatible = "usb-nop-xceiv";
+		vbus-regulator = <&reg_5p0v_usb>;
+	};
+
+	usb3_phy: usb3-phy {
+		compatible = "usb-nop-xceiv";
+	};
+
+	soc {
+		internal-regs {
+			i2c@11000 {
+				/*
+				 * PCA9655 GPIO expander, up to 1MHz clock.
+				 *  0-Board Revision bit 0 #
+				 *  1-Board Revision bit 1 #
+				 *  5-USB3 overcurrent
+				 *  6-USB3 power
+				 */
+				expander0: gpio-expander@20 {
+					/*
+					 * This is how it should be:
+					 * compatible = "onnn,pca9655",
+					 *	 "nxp,pca9555";
+					 * but you can't do this because of
+					 * the way I2C works.
+					 */
+					compatible = "nxp,pca9555";
+					gpio-controller;
+					#gpio-cells = <2>;
+					reg = <0x20>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pca0_pins>;
+					interrupt-parent = <&gpio0>;
+					interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+
+					board-rev-bit-0-hog {
+						gpio-hog;
+						gpios = <0 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-0";
+					};
+					board-rev-bit-1-hog {
+						gpio-hog;
+						gpios = <1 GPIO_ACTIVE_LOW>;
+						input;
+						line-name = "board-rev-1";
+					};
+					usb3-ilimit-hog {
+						gpio-hog;
+						gpios = <5 GPIO_ACTIVE_HIGH>;
+						input;
+						line-name = "usb-overcurrent-status";
+					};
+				};
+
+				temp_sensor: temp@4c {
+					compatible = "ti,lm75";
+					reg = <0x4c>;
+					vcc-supply = <&reg_3p3v>;
+				};
+			};
+
+			i2c@11100 {
+				/*
+				 * External I2C Bus for user peripheral
+				 */
+				clock-frequency = <400000>;
+				pinctrl-0 = <&helios_i2c1_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sata@a8000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata0: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata1: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			sata@e0000 {
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				sata2: sata-port@0 {
+					reg = <0>;
+				};
+
+				sata3: sata-port@1 {
+					reg = <1>;
+				};
+			};
+
+			spi@10680 {
+				pinctrl-0 = <&spi1_pins
+					     &microsom_spi1_cs_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+			};
+
+			sdhci@d8000 {
+				bus-width = <4>;
+				cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+				no-1-8-v;
+				pinctrl-0 = <&helios_sdhci_pins
+					     &helios_sdhci_cd_pins>;
+				pinctrl-names = "default";
+				status = "okay";
+				vmmc = <&reg_3p3v>;
+				wp-inverted;
+			};
+
+			usb@58000 {
+				usb-phy = <&usb2_phy>;
+				status = "okay";
+			};
+
+			usb3@f0000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
+				status = "okay";
+			};
+
+			pinctrl@18000 {
+				pca0_pins: pca0-pins {
+					marvell,pins = "mpp23";
+					marvell,function = "gpio";
+				};
+				microsom_phy0_int_pins: microsom-phy0-int-pins {
+					marvell,pins = "mpp18";
+					marvell,function = "gpio";
+				};
+				helios_i2c1_pins: i2c1-pins {
+					marvell,pins = "mpp26", "mpp27";
+					marvell,function = "i2c1";
+				};
+				helios_sdhci_cd_pins: helios-sdhci-cd-pins {
+					marvell,pins = "mpp20";
+					marvell,function = "gpio";
+				};
+				helios_sdhci_pins: helios-sdhci-pins {
+					marvell,pins = "mpp21", "mpp28",
+						       "mpp37", "mpp38",
+						       "mpp39", "mpp40";
+					marvell,function = "sd0";
+				};
+				helios_system_led_pins: helios-system-led-pins {
+					marvell,pins = "mpp24", "mpp25";
+					marvell,function = "gpio";
+				};
+				helios_io_led_pins: helios-io-led-pins {
+					marvell,pins = "mpp49", "mpp50",
+						       "mpp52", "mpp53",
+						       "mpp54";
+					marvell,function = "gpio";
+				};
+				helios_fan1_pins: helios_fan1_pins {
+					marvell,pins = "mpp41", "mpp43";
+					marvell,function = "gpio";
+				};
+				helios_fan2_pins: helios_fan2_pins {
+					marvell,pins = "mpp48", "mpp55";
+					marvell,function = "gpio";
+				};
+				microsom_spi1_cs_pins: spi1-cs-pins {
+					marvell,pins = "mpp59";
+					marvell,function = "spi1";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts
index b657b1687e5f..c0efafd45b33 100644
--- a/arch/arm/boot/dts/armada-388-rd.dts
+++ b/arch/arm/boot/dts/armada-388-rd.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada 388 Reference Design board
  * (RD-88F6820-AP)
@@ -6,44 +7,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -65,21 +28,11 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
 
 		internal-regs {
-			spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "st,m25p128", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
-
 			i2c@11000 {
 				status = "okay";
 				clock-frequency = <100000>;
@@ -127,7 +80,7 @@
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 			/*
 			 * One PCIe units is accessible through
@@ -140,3 +93,16 @@
 		};
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p128", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/armada-388.dtsi b/arch/arm/boot/dts/armada-388.dtsi
index 564fa5937e25..f3a020ff577e 100644
--- a/arch/arm/boot/dts/armada-388.dtsi
+++ b/arch/arm/boot/dts/armada-388.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 388 SoC.
  *
@@ -5,39 +6,6 @@
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
- *
  * The main difference with the Armada 385 is that the 388 can handle two more
  * SATA ports. So we can reuse the dtsi of the Armada 385, override the pinctrl
  * property and the name of the SoC, and add the second SATA host which control
@@ -50,13 +18,8 @@
 	model = "Marvell Armada 388 family SoC";
 	compatible = "marvell,armada388", "marvell,armada385",
 		"marvell,armada380";
-
 	soc {
 		internal-regs {
-			pinctrl@18000 {
-				compatible = "marvell,mv88f6828-pinctrl";
-			};
-
 			sata@e0000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xe0000 0x2000>;
@@ -68,3 +31,7 @@
 		};
 	};
 };
+
+&pinctrl {
+	compatible = "marvell,mv88f6828-pinctrl";
+};
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
new file mode 100644
index 000000000000..2c64bc6e5a17
--- /dev/null
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for SolidRun Armada 38x Microsom
+ *
+ *  Copyright (C) 2015 Russell King
+ */
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x10000000>; /* 256 MB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+		internal-regs {
+			rtc@a3800 {
+				/*
+				 * If the rtc doesn't work, run "date reset"
+				 * twice in u-boot.
+				 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	/* ethernet@70000 */
+	pinctrl-0 = <&ge0_rgmii_pins>;
+	pinctrl-names = "default";
+	phy = <&phy_dedicated>;
+	phy-mode = "rgmii-id";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+	status = "okay";
+};
+
+&mdio {
+	/*
+	 * Add the phy clock here, so the phy can be accessed to read its
+	 * IDs prior to binding with the driver.
+	 */
+	pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
+	pinctrl-names = "default";
+
+	phy_dedicated: ethernet-phy@0 {
+		/*
+		 * Annoyingly, the marvell phy driver configures the LED
+		 * register, rather than preserving reset-loaded setting.
+		 * We undo that rubbish here.
+		 */
+		marvell,reg-init = <3 16 0 0x101e>;
+		reg = <0>;
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	microsom_phy_clk_pins: microsom-phy-clk-pins {
+		marvell,pins = "mpp45";
+		marvell,function = "ref";
+	};
+	/* Optional eMMC */
+	microsom_sdhci_pins: microsom-sdhci-pins {
+		marvell,pins = "mpp21", "mpp28", "mpp37",
+			       "mpp38", "mpp39", "mpp40";
+		marvell,function = "sd0";
+	};
+};
+
+&spi1 {
+	/* The microsom has an optional W25Q32 on board, connected to CS0 */
+	pinctrl-0 = <&spi1_pins>;
+
+	w25q32: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "w25q32", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <3000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 04ecfe6e2bc6..446861b6b17b 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 38x family of SoCs.
  *
@@ -6,53 +7,17 @@
  * Lior Amsalem <alior@marvell.com>
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	model = "Marvell Armada 38x family SoC";
 	compatible = "marvell,armada380";
 
@@ -82,7 +47,7 @@
 			reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
 		};
 
-		devbus-bootcs {
+		devbus_bootcs: devbus-bootcs {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
@@ -92,7 +57,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs0 {
+		devbus_cs0: devbus-cs0 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
@@ -102,7 +67,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs1 {
+		devbus_cs1: devbus-cs1 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
@@ -112,7 +77,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs2 {
+		devbus_cs2: devbus-cs2 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
@@ -122,7 +87,7 @@
 			status = "disabled";
 		};
 
-		devbus-cs3 {
+		devbus_cs3: devbus-cs3 {
 			compatible = "marvell,mvebu-devbus";
 			reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 			ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
@@ -138,11 +103,20 @@
 			#size-cells = <1>;
 			ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
 			L2: cache-controller@8000 {
 				compatible = "arm,pl310-cache";
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
@@ -150,6 +124,13 @@
 				reg = <0xc000 0x58>;
 			};
 
+			timer@c200 {
+				compatible = "arm,cortex-a9-global-timer";
+				reg = <0xc200 0x20>;
+				interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
+				clocks = <&coreclk 2>;
+			};
+
 			timer@c600 {
 				compatible = "arm,cortex-a9-twd-timer";
 				reg = <0xc600 0x20>;
@@ -166,54 +147,28 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-380-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
 			i2c1: i2c@11100 {
-				compatible = "marvell,mv64xxx-i2c";
+				compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
 				reg = <0x11100 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
 
 			uart0: serial@12000 {
-				compatible = "snps,dw-apb-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12000 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
@@ -223,7 +178,7 @@
 			};
 
 			uart1: serial@12100 {
-				compatible = "snps,dw-apb-uart";
+				compatible = "marvell,armada-38x-uart", "ns16550a";
 				reg = <0x12100 0x100>;
 				reg-shift = <2>;
 				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
@@ -283,6 +238,20 @@
 					marvell,function = "spi1";
 				};
 
+				nand_pins: nand-pins {
+					marvell,pins = "mpp22", "mpp34", "mpp23",
+						       "mpp33", "mpp38", "mpp28",
+						       "mpp40", "mpp42", "mpp35",
+						       "mpp36", "mpp25", "mpp30",
+						       "mpp32";
+					marvell,function = "dev";
+				};
+
+				nand_rb: nand-rb {
+					marvell,pins = "mpp41";
+					marvell,function = "nand";
+				};
+
 				uart0_pins: uart-pins-0 {
 					marvell,pins = "mpp0", "mpp1";
 					marvell,function = "ua0";
@@ -320,37 +289,59 @@
 					marvell,pins = "mpp44";
 					marvell,function = "sata3";
 				};
+
+				i2s_pins: i2s-pins {
+					marvell,pins = "mpp48", "mpp49",
+						       "mpp50", "mpp51",
+						       "mpp52", "mpp53";
+					marvell,function = "audio";
+				};
+
+				spdif_pins: spdif-pins {
+					marvell,pins = "mpp51";
+					marvell,function = "audio";
+				};
 			};
 
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 0 32>;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <28>;
 				gpio-controller;
+				gpio-ranges = <&pinctrl 0 32 28>;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&coreclk 0>;
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-380-system-controller",
 					     "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x100>;
@@ -363,6 +354,44 @@
 				#clock-cells = <1>;
 			};
 
+			comphy: phy@18300 {
+				compatible = "marvell,armada-380-comphy";
+				reg-names = "comphy", "conf";
+				reg = <0x18300 0x100>, <0x18460 4>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				comphy0: phy@0 {
+					reg = <0>;
+					#phy-cells = <1>;
+				};
+
+				comphy1: phy@1 {
+					reg = <1>;
+					#phy-cells = <1>;
+				};
+
+				comphy2: phy@2 {
+					reg = <2>;
+					#phy-cells = <1>;
+				};
+
+				comphy3: phy@3 {
+					reg = <3>;
+					#phy-cells = <1>;
+				};
+
+				comphy4: phy@4 {
+					reg = <4>;
+					#phy-cells = <1>;
+				};
+
+				comphy5: phy@5 {
+					reg = <5>;
+					#phy-cells = <1>;
+				};
+			};
+
 			coreclk: mvebu-sar@18600 {
 				compatible = "marvell,armada-380-core-clock";
 				reg = <0x18600 0x04>;
@@ -371,7 +400,8 @@
 
 			mbusc: mbus-controller@20000 {
 				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x100>, <0x20180 0x20>;
+				reg = <0x20000 0x100>, <0x20180 0x20>,
+				      <0x20250 0x8>;
 			};
 
 			mpic: interrupt-controller@20a00 {
@@ -384,7 +414,7 @@
 				interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			timer@20300 {
+			timer: timer@20300 {
 				compatible = "marvell,armada-380-timer",
 					     "marvell,armada-xp-timer";
 				reg = <0x20300 0x30>, <0x21040 0x30>;
@@ -398,14 +428,16 @@
 				clock-names = "nbclk", "fixed";
 			};
 
-			watchdog@20300 {
+			watchdog: watchdog@20300 {
 				compatible = "marvell,armada-380-wdt";
 				reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
 				clocks = <&coreclk 2>, <&refclk>;
 				clock-names = "nbclk", "fixed";
+				interrupts-extended = <&gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+						      <&gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			cpurst@20800 {
+			cpurst: cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
@@ -415,16 +447,37 @@
 				reg = <0x20d20 0x6c>;
 			};
 
-			coherency-fabric@21010 {
+			coherencyfab: coherency-fabric@21010 {
 				compatible = "marvell,armada-380-coherency-fabric";
 				reg = <0x21010 0x1c>;
 			};
 
-			pmsu@22000 {
+			pmsu: pmsu@22000 {
 				compatible = "marvell,armada-380-pmsu";
 				reg = <0x22000 0x1000>;
 			};
 
+			/*
+			 * As a special exception to the "order by
+			 * register address" rule, the eth0 node is
+			 * placed here to ensure that it gets
+			 * registered as the first interface, since
+			 * the network subsystem doesn't allow naming
+			 * interfaces using DT aliases. Without this,
+			 * the ordering of interfaces is different
+			 * from the one used in U-Boot and the
+			 * labeling of interfaces on the boards, which
+			 * is very confusing for users.
+			 */
+			eth0: ethernet@70000 {
+				compatible = "marvell,armada-370-neta";
+				reg = <0x70000 0x4000>;
+				interrupts-extended = <&mpic 8>;
+				clocks = <&gateclk 4>;
+				tx-csum-limit = <9800>;
+				status = "disabled";
+			};
+
 			eth1: ethernet@30000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x30000 0x4000>;
@@ -441,7 +494,7 @@
 				status = "disabled";
 			};
 
-			usb@58000 {
+			usb0: usb@58000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x58000 0x500>;
 				interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
@@ -449,8 +502,8 @@
 				status = "disabled";
 			};
 
-			xor@60800 {
-				compatible = "marvell,orion-xor";
+			xor0: xor@60800 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
 				clocks = <&gateclk 22>;
@@ -469,8 +522,8 @@
 				};
 			};
 
-			xor@60900 {
-				compatible = "marvell,orion-xor";
+			xor1: xor@60900 {
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
 				clocks = <&gateclk 28>;
@@ -489,14 +542,6 @@
 				};
 			};
 
-			eth0: ethernet@70000 {
-				compatible = "marvell,armada-370-neta";
-				reg = <0x70000 0x4000>;
-				interrupts-extended = <&mpic 8>;
-				clocks = <&gateclk 4>;
-				status = "disabled";
-			};
-
 			mdio: mdio@72004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -505,14 +550,29 @@
 				clocks = <&gateclk 4>;
 			};
 
-			rtc@a3800 {
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-38x-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 23>, <&gateclk 21>,
+					 <&gateclk 14>, <&gateclk 16>;
+				clock-names = "cesa0", "cesa1",
+					      "cesaz0", "cesaz1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			rtc: rtc@a3800 {
 				compatible = "marvell,armada-380-rtc";
 				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
 				reg-names = "rtc", "rtc-soc";
 				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			sata@a8000 {
+			ahci0: sata@a8000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xa8000 0x2000>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
@@ -520,7 +580,15 @@
 				status = "disabled";
 			};
 
-			sata@e0000 {
+			bm: bm@c8000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc8000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			ahci1: sata@e0000 {
 				compatible = "marvell,armada-380-ahci";
 				reg = <0xe0000 0x2000>;
 				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -536,23 +604,23 @@
 				clock-output-names = "nand";
 			};
 
-			thermal@e8078 {
+			thermal: thermal@e8078 {
 				compatible = "marvell,armada380-thermal";
-				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				reg = <0xe4078 0x4>, <0xe4070 0x8>;
 				status = "okay";
 			};
 
-			flash@d0000 {
-				compatible = "marvell,armada370-nand";
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&coredivclk 0>;
 				status = "disabled";
 			};
 
-			sdhci@d8000 {
+			sdhci: sdhci@d8000 {
 				compatible = "marvell,armada-380-sdhci";
 				reg-names = "sdhci", "mbus", "conf-sdio3";
 				reg = <0xd8000 0x1000>,
@@ -564,7 +632,19 @@
 				status = "disabled";
 			};
 
-			usb3@f0000 {
+			audio_controller: audio-controller@e8000 {
+				#sound-dai-cells = <1>;
+				compatible = "marvell,armada-380-audio";
+				reg = <0xe8000 0x4000>, <0x18410 0xc>,
+				      <0x18204 0x4>;
+				reg-names = "i2s_regs", "pll_regs", "soc_ctrl";
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 0>;
+				clock-names = "internal";
+				status = "disabled";
+			};
+
+			usb3_0: usb3@f0000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
 				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
@@ -572,7 +652,7 @@
 				status = "disabled";
 			};
 
-			usb3@f8000 {
+			usb3_1: usb3@f8000 {
 				compatible = "marvell,armada-380-xhci";
 				reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
@@ -580,10 +660,63 @@
 				status = "disabled";
 			};
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
+			clocks = <&gateclk 21>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-380-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/armada-390-db.dts b/arch/arm/boot/dts/armada-390-db.dts
new file mode 100644
index 000000000000..792d0a0184e8
--- /dev/null
+++ b/arch/arm/boot/dts/armada-390-db.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Marvell Armada 390 Development Board
+ * (DB-88F6920)
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-390.dtsi"
+
+/ {
+	model = "Marvell Armada 390 Development Board";
+	compatible = "marvell,a390-db", "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@50 {
+					compatible = "atmel,24c64";
+					reg = <0x50>;
+				};
+			};
+
+			/* CON104 */
+			serial@12000 {
+				status = "okay";
+			};
+
+			/* CON97 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON98 */
+			usb3@f8000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/* CON30 */
+			pcie@1,0 {
+				status = "okay";
+			};
+
+			/* CON44 */
+			pcie@2,0 {
+				status = "okay";
+			};
+
+			/* CON61 */
+			pcie@3,0 {
+				status = "okay";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13",
+			     "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x400000>;
+			};
+			partition@400000 {
+				label = "Filesystem";
+				reg = <0x400000 0xc00000>;
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-390.dtsi b/arch/arm/boot/dts/armada-390.dtsi
index 094e39c66039..aa2057d4d6f8 100644
--- a/arch/arm/boot/dts/armada-390.dtsi
+++ b/arch/arm/boot/dts/armada-390.dtsi
@@ -1,52 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 390 SoC.
  *
  * Copyright (C) 2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "armada-39x.dtsi"
 
 / {
+	compatible = "marvell,armada390";
+
 	soc {
 		internal-regs {
 			pinctrl@18000 {
@@ -54,4 +19,5 @@
 				reg = <0x18000 0x20>;
 			};
 		};
+	};
 };
diff --git a/arch/arm/boot/dts/armada-395-gp.dts b/arch/arm/boot/dts/armada-395-gp.dts
new file mode 100644
index 000000000000..6dd9e9077f84
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395-gp.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Marvell Armada 395 GP board
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+/dts-v1/;
+#include "armada-395.dtsi"
+
+/ {
+	model = "Marvell Armada 395 GP Board";
+	compatible = "marvell,a395-gp", "marvell,armada395",
+		     "marvell,armada390";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1 GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
+
+		internal-regs {
+			i2c@11000 {
+				status = "okay";
+				clock-frequency = <100000>;
+
+				eeprom@57 {
+					compatible = "atmel,24c64";
+					reg = <0x57>;
+				};
+			};
+
+			serial@12000 {
+				/*
+				 * Exported on the micro USB connector CON17
+				 * through an FTDI
+				 */
+				status = "okay";
+			};
+
+			/* CON1 */
+			usb@58000 {
+				status = "okay";
+			};
+
+			/* CON2 */
+			sata@a8000 {
+				status = "okay";
+			};
+
+			/* CON18 */
+			sdhci@d8000 {
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			/* CON4 */
+			usb3@f0000 {
+				status = "okay";
+			};
+		};
+
+		pcie {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
+
+			/* CON7 */
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			/* CON8 */
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0x00000000 0x00600000>;
+				read-only;
+			};
+
+			partition@800000 {
+				label = "uImage";
+				reg = <0x00600000 0x00400000>;
+				read-only;
+			};
+
+			partition@1000000 {
+				label = "Root";
+				reg = <0x00a00000 0x3f600000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-395.dtsi b/arch/arm/boot/dts/armada-395.dtsi
new file mode 100644
index 000000000000..e18a7d9cd7d4
--- /dev/null
+++ b/arch/arm/boot/dts/armada-395.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell Armada 395 SoC.
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Grzegorz Jaszczyk <jaz@semihalf.com>
+ */
+
+#include "armada-39x.dtsi"
+
+/ {
+	compatible = "marvell,armada395", "marvell,armada390";
+
+	soc {
+		internal-regs {
+			pinctrl@18000 {
+				compatible = "marvell,mv88f6925-pinctrl";
+				reg = <0x18000 0x20>;
+			};
+
+			sata@a8000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xa8000 0x2000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 15>;
+				status = "disabled";
+			};
+
+			usb3@f0000 {
+				compatible = "marvell,armada-380-xhci";
+				reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 9>;
+				status = "disabled";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts
index 788c3badb681..ec6cdbeedde7 100644
--- a/arch/arm/boot/dts/armada-398-db.dts
+++ b/arch/arm/boot/dts/armada-398-db.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 398 Development Board
  *
  * Copyright (C) 2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -65,30 +28,6 @@
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
 
 		internal-regs {
-			spi@10680 {
-				status = "okay";
-				pinctrl-0 = <&spi1_pins>;
-				pinctrl-names = "default";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>;
-					spi-max-frequency = <108000000>;
-
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x400000>;
-					};
-
-					partition@400000 {
-						label = "Filesystem";
-						reg = <0x400000 0x1000000>;
-					};
-				};
-			};
-
 			i2c@11000 {
 				pinctrl-0 = <&i2c0_pins>;
 				pinctrl-names = "default";
@@ -108,33 +47,16 @@
 				status = "okay";
 			};
 
-			flash@d0000 {
+			usb@58000 {
+				status = "okay";
+			};
+
+			usb3@f8000 {
 				status = "okay";
-				pinctrl-0 = <&nand_pins>;
-				pinctrl-names = "default";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <8>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "U-Boot";
-					reg = <0 0x800000>;
-				};
-				partition@800000 {
-					label = "Linux";
-					reg = <0x800000 0x800000>;
-				};
-				partition@1000000 {
-					label = "Filesystem";
-					reg = <0x1000000 0x3f000000>;
-				};
 			};
 		};
 
-		pcie-controller {
+		pcie {
 			status = "okay";
 
 			pcie@1,0 {
@@ -151,3 +73,62 @@
 		};
 	};
 };
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0 0x400000>;
+		};
+
+		partition@400000 {
+			label = "Filesystem";
+			reg = <0x400000 0x1000000>;
+		};
+	};
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x800000>;
+			};
+			partition@800000 {
+				label = "Linux";
+				reg = <0x800000 0x800000>;
+			};
+			partition@1000000 {
+				label = "Filesystem";
+				reg = <0x1000000 0x3f000000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-398.dtsi b/arch/arm/boot/dts/armada-398.dtsi
index fdc25914e3a3..c5ac89399ce1 100644
--- a/arch/arm/boot/dts/armada-398.dtsi
+++ b/arch/arm/boot/dts/armada-398.dtsi
@@ -1,50 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 398 SoC.
  *
  * Copyright (C) 2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "armada-39x.dtsi"
+#include "armada-395.dtsi"
 
 / {
 	compatible = "marvell,armada398", "marvell,armada390";
@@ -55,6 +18,14 @@
 				compatible = "marvell,mv88f6928-pinctrl";
 				reg = <0x18000 0x20>;
 			};
+
+			sata@e0000 {
+				compatible = "marvell,armada-380-ahci";
+				reg = <0xe0000 0x2000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gateclk 30>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index fc9864f85fc2..9d1cac49c022 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -1,60 +1,26 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 39x family of SoCs.
  *
  * Copyright (C) 2015 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Marvell Armada 39x family SoC";
 	compatible = "marvell,armada390";
 
 	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -78,6 +44,11 @@
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts-extended = <&mpic 3>;
+	};
+
 	soc {
 		compatible = "marvell,armada390-mbus", "marvell,armadaxp-mbus",
 			     "simple-bus";
@@ -104,6 +75,10 @@
 				reg = <0x8000 0x1000>;
 				cache-unified;
 				cache-level = <2>;
+				arm,double-linefill-incr = <0>;
+				arm,double-linefill-wrap = <0>;
+				arm,double-linefill = <0>;
+				prefetch-data = <1>;
 			};
 
 			scu@c000 {
@@ -127,37 +102,12 @@
 				      <0xc100 0x100>;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-390-spi",
-						"marvell,orion-spi";
-				reg = <0x10680 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&coreclk 0>;
-				status = "disabled";
-			};
-
 			i2c0: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -168,7 +118,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -179,7 +128,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -190,7 +138,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -265,6 +212,34 @@
 				};
 			};
 
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				ngpios = <28>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
 			system-controller@18200 {
 				compatible = "marvell,armada-390-system-controller",
 					     "marvell,armada-370-xp-system-controller";
@@ -313,11 +288,29 @@
 				clock-names = "nbclk", "fixed";
 			};
 
+			watchdog@20300 {
+				compatible = "marvell,armada-380-wdt";
+				reg = <0x20300 0x34>, <0x20704 0x4>,
+				      <0x18260 0x4>;
+				clocks = <&coreclk 2>, <&refclk>;
+				clock-names = "nbclk", "fixed";
+			};
+
 			cpurst@20800 {
 				compatible = "marvell,armada-370-cpu-reset";
 				reg = <0x20800 0x10>;
 			};
 
+			mpcore-soc-ctrl@20d20 {
+				compatible = "marvell,armada-380-mpcore-soc-ctrl";
+				reg = <0x20d20 0x6c>;
+			};
+
+			coherency-fabric@21010 {
+				compatible = "marvell,armada-380-coherency-fabric";
+				reg = <0x21010 0x1c>;
+			};
+
 			pmsu@22000 {
 				compatible = "marvell,armada-390-pmsu",
 					     "marvell,armada-380-pmsu";
@@ -325,7 +318,7 @@
 			};
 
 			xor@60800 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60800 0x100
 				       0x60a00 0x100>;
 				clocks = <&gateclk 22>;
@@ -345,7 +338,7 @@
 			};
 
 			xor@60900 {
-				compatible = "marvell,orion-xor";
+				compatible = "marvell,armada-380-xor", "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
 				clocks = <&gateclk 28>;
@@ -364,11 +357,18 @@
 				};
 			};
 
-			flash@d0000 {
-				compatible = "marvell,armada370-nand";
+			rtc@a3800 {
+				compatible = "marvell,armada-380-rtc";
+				reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+				reg-names = "rtc", "rtc-soc";
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			nand_controller: nand-controller@d0000 {
+				compatible = "marvell,armada370-nand-controller";
 				reg = <0xd0000 0x54>;
 				#address-cells = <1>;
-				#size-cells = <1>;
+				#size-cells = <0>;
 				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&coredivclk 0>;
 				status = "disabled";
@@ -376,7 +376,10 @@
 
 			sdhci@d8000 {
 				compatible = "marvell,armada-380-sdhci";
-				reg = <0xd8000 0x1000>, <0xdc000 0x100>;
+				reg-names = "sdhci", "mbus", "conf-sdio3";
+				reg = <0xd8000 0x1000>,
+					<0xdc000 0x100>,
+					<0x18454 0x4>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gateclk 17>;
 				mrvl,clk-delay-cycles = <0x1F>;
@@ -391,9 +394,15 @@
 				clocks = <&mainpll>;
 				clock-output-names = "nand";
 			};
+
+			thermal@e8078 {
+				compatible = "marvell,armada380-thermal";
+				reg = <0xe4078 0x4>, <0xe4074 0x4>;
+				status = "okay";
+			};
 		};
 
-		pcie-controller {
+		pcie {
 			compatible = "marvell,armada-370-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -429,51 +438,84 @@
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x40000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/* x1 port */
 			pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x44000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
 			/*
@@ -482,29 +524,71 @@
 			 */
 			pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x48000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
+
+		spi0: spi@10600 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
+
+		spi1: spi@10680 {
+			compatible = "marvell,armada-390-spi",
+					"marvell,orion-spi";
+			reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&coreclk 0>;
+			status = "disabled";
+		};
 	};
 
 	clocks {
-		/* 2 GHz fixed main PLL */
+		/* 1 GHz fixed main PLL */
 		mainpll: mainpll {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <1000000000>;
 		};
+
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-98dx3236.dtsi b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
new file mode 100644
index 000000000000..7a7e2066c498
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3236.dtsi
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3236 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-370-xp.dtsi"
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	model = "Marvell 98DX3236 SoC";
+	compatible = "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "marvell,98dx3236-smp";
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <0>;
+			clocks = <&cpuclk 0>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		compatible = "marvell,armadaxp-mbus", "simple-bus";
+
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x03, 0x00) 0 0 0xa8000000 0x4000000
+			  MBUS_ID(0x08, 0x00) 0 0 0xac000000 0x100000>;
+
+		bootrom {
+			compatible = "marvell,bootrom";
+			reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+		};
+
+		/*
+		 * 98DX3236 has 1 x1 PCIe unit Gen2.0
+		 */
+		pciec: pcie@82000000 {
+			compatible = "marvell,armada-xp-pcie";
+			status = "disabled";
+			device_type = "pci";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			msi-parent = <&mpic>;
+			bus-range = <0x00 0xff>;
+
+			ranges =
+			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
+				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
+				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */>;
+
+			pcie1: pcie@1,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+				reg = <0x0800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
+					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+				marvell,pcie-port = <0>;
+				marvell,pcie-lane = <0>;
+				clocks = <&gateclk 5>;
+				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
+			};
+		};
+
+		internal-regs {
+			sdramc: sdramc@1400 {
+				compatible = "marvell,armada-xp-sdram-controller";
+				reg = <0x1400 0x500>;
+			};
+
+			L2: l2-cache@8000 {
+				compatible = "marvell,aurora-system-cache";
+				reg = <0x08000 0x1000>;
+				cache-id-part = <0x100>;
+				cache-level = <2>;
+				cache-unified;
+				wt-override;
+			};
+
+			gpio0: gpio@18100 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18100 0x40>;
+				ngpios = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <82>, <83>, <84>, <85>;
+			};
+
+			/* does not exist */
+			gpio1: gpio@18140 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x18140 0x40>;
+				status = "disabled";
+			};
+
+			gpio2: gpio@18180 { /* rework some properties */
+				compatible = "marvell,orion-gpio";
+				reg = <0x18180 0x40>;
+				ngpios = <1>; /* only gpio #32 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts = <87>;
+			};
+
+			systemc: system-controller@18200 {
+				compatible = "marvell,armada-370-xp-system-controller";
+				reg = <0x18200 0x500>;
+			};
+
+			gateclk: clock-gating-control@18220 {
+				compatible = "marvell,mv98dx3236-gating-clock";
+				reg = <0x18220 0x4>;
+				clocks = <&coreclk 0>;
+				#clock-cells = <1>;
+			};
+
+			cpuclk: clock-complex@18700 {
+				#clock-cells = <1>;
+				compatible = "marvell,mv98dx3236-cpu-clock";
+				reg = <0x18700 0x24>, <0x1c054 0x10>;
+				clocks = <&coreclk 1>;
+			};
+
+			corediv-clock@18740 {
+				status = "disabled";
+			};
+
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
+			};
+
+			ethernet@70000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			ethernet@74000 {
+				compatible = "marvell,armada-xp-neta";
+			};
+
+			xor1: xor@f0800 {
+				compatible = "marvell,orion-xor";
+				reg = <0xf0800 0x100
+				       0xf0a00 0x100>;
+				clocks = <&gateclk 22>;
+				status = "okay";
+
+				xor10 {
+					interrupts = <51>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor11 {
+					interrupts = <52>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+
+			nand_controller: nand-controller@d0000 {
+				clocks = <&dfx_coredivclk 0>;
+			};
+
+			xor0: xor@f0900 {
+				compatible = "marvell,orion-xor";
+				reg = <0xF0900 0x100
+				       0xF0B00 0x100>;
+				clocks = <&gateclk 28>;
+				status = "okay";
+
+				xor00 {
+					interrupts = <94>;
+					dmacap,memcpy;
+					dmacap,xor;
+				};
+				xor01 {
+					interrupts = <95>;
+					dmacap,memcpy;
+					dmacap,xor;
+					dmacap,memset;
+				};
+			};
+		};
+
+		dfx: dfx-server@ac000000 {
+			compatible = "marvell,dfx-server", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
+			reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
+
+			coreclk: mvebu-sar@f8204 {
+				compatible = "marvell,mv98dx3236-core-clock";
+				reg = <0xf8204 0x4>;
+				#clock-cells = <1>;
+			};
+
+			dfx_coredivclk: corediv-clock@f8268 {
+				compatible = "marvell,mv98dx3236-corediv-clock";
+				reg = <0xf8268 0xc>;
+				#clock-cells = <1>;
+				clocks = <&mainpll>;
+				clock-output-names = "nand";
+			};
+		};
+
+		switch: switch@a8000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x03, 0x00) 0 0x100000>;
+
+			pp0: packet-processor@0 {
+				compatible = "marvell,prestera-98dx3236", "marvell,prestera";
+				reg = <0 0x4000000>;
+				interrupts = <33>, <34>, <35>;
+				dfx = <&dfx>;
+			};
+		};
+	};
+
+	clocks {
+		/* 25 MHz reference crystal */
+		refclk: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <25000000>;
+		};
+	};
+};
+
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
+&pinctrl {
+	compatible = "marvell,98dx3236-pinctrl";
+
+	nand_pins: nand-pins {
+		marvell,pins = "mpp20", "mpp21", "mpp22",
+			       "mpp23", "mpp24", "mpp25",
+			       "mpp26", "mpp27", "mpp28",
+			       "mpp29", "mpp30";
+		marvell,function = "dev";
+	};
+
+	nand_rb: nand-rb {
+		marvell,pins = "mpp19";
+		marvell,function = "nand";
+	};
+
+	spi0_pins: spi0-pins {
+		marvell,pins = "mpp0", "mpp1",
+			       "mpp2", "mpp3";
+		marvell,function = "spi0";
+	};
+
+	i2c0_pins: i2c-pins-0 {
+		marvell,pins = "mpp14", "mpp15";
+		marvell,function = "i2c0";
+	};
+};
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&sdio {
+	status = "disabled";
+};
+
+&uart0 {
+	compatible = "marvell,armada-38x-uart";
+};
+
+&uart1 {
+	compatible = "marvell,armada-38x-uart";
+};
+
diff --git a/arch/arm/boot/dts/armada-xp-98dx3336.dtsi b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
new file mode 100644
index 000000000000..1d9d8a8ea60c
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx3336.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx3336 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx3236 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX3336 SoC";
+	compatible = "marvell,armadaxp-98dx3336", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx3336", "marvell,prestera";
+};
diff --git a/arch/arm/boot/dts/armada-xp-98dx4251.dtsi b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
new file mode 100644
index 000000000000..48ffdc72bfc7
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-98dx4251.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree Include file for Marvell 98dx4521 family SoC
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Contains definitions specific to the 98dx4521 SoC that are not
+ * common to all Armada XP SoCs.
+ */
+
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "Marvell 98DX4251 SoC";
+	compatible = "marvell,armadaxp-98dx4251", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	cpus {
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "marvell,sheeva-v7";
+			reg = <1>;
+			clocks = <&cpuclk 1>;
+			clock-latency = <1000000>;
+		};
+	};
+
+	soc {
+		internal-regs {
+			resume@20980 {
+				compatible = "marvell,98dx3336-resume-ctrl";
+				reg = <0x20980 0x10>;
+			};
+		};
+	};
+};
+
+&sdio {
+	status = "okay";
+};
+
+&pinctrl {
+	compatible = "marvell,98dx4251-pinctrl";
+
+	sdio_pins: sdio-pins {
+		marvell,pins = "mpp5", "mpp6", "mpp7",
+			       "mpp8", "mpp9", "mpp10";
+		marvell,function = "sd0";
+	};
+};
+
+&pp0 {
+	compatible = "marvell,prestera-98dx4251", "marvell,prestera";
+	interrupts = <33>, <34>, <35>, <36>;
+};
diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
index 60bbfe32bb80..5a74197be0ad 100644
--- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell RD-AXPWiFiAP.
  *
@@ -9,44 +10,6 @@
  * Copyright (C) 2013 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -62,36 +25,16 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x40000000>; /* 1GB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* First mini-PCIe port */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Renesas uPD720202 USB 3.0 controller */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			/* UART0 */
@@ -109,16 +52,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -133,29 +66,15 @@
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
 			};
-
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
-			};
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_SETUP>;
 			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
@@ -163,6 +82,38 @@
 	};
 };
 
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/* First mini-PCIe port */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Second mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Renesas uPD720202 USB 3.0 controller */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
 &pinctrl {
 	pinctrl-0 = <&phy_int_pin>;
 	pinctrl-names = "default";
@@ -177,3 +128,15 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
new file mode 100644
index 000000000000..c28e140b4afc
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
new file mode 100644
index 000000000000..010b83b54212
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS305-1G-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs305-1g-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS305-1G-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
new file mode 100644
index 000000000000..47b003a81bd4
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs305-1g-4s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS305-1G-4S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS305-1G-4S+";
+	compatible = "mikrotik,crs305-1g-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
new file mode 100644
index 000000000000..20ba5c823bb2
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
new file mode 100644
index 000000000000..83aef43f66d5
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS326-24G-2S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs326-24g-2s.dtsi"
+
+/ {
+	model = "MikroTik CRS326-24G-2S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
new file mode 100644
index 000000000000..cab99d8e2911
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs326-24g-2s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS326-24G-2S board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS326-24G-2S+";
+	compatible = "mikrotik,crs326-24g-2s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
new file mode 100644
index 000000000000..2caa3980fdf6
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s-bit.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ Bit board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+ Bit";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x03f00000>;
+			label = "ubi1";
+		};
+		partition@ubi2 {
+			reg = <0x04100000 0x03f00000>;
+			label = "ubi2";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
new file mode 100644
index 000000000000..665757f6e18e
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for MikroTik CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2020 Sartura Ltd.
+ * Author: Luka Kovacic <luka.kovacic@sartura.hr>
+ */
+
+#include "armada-xp-crs328-4c-20s-4s.dtsi"
+
+/ {
+	model = "MikroTik CRS328-4C-20S-4S+";
+};
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
new file mode 100644
index 000000000000..7028482ce4b2
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-crs328-4c-20s-4s.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for CRS328-4C-20S-4S+ board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ * Copyright (C) 2020 Sartura Ltd.
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3236.dtsi"
+
+/ {
+	model = "CRS328-4C-20S-4S+";
+	compatible = "mikrotik,crs328-4c-20s-4s", "marvell,armadaxp-98dx3236", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x001f0000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x001f0000 0x00010000>;
+			label = "u-boot-env";
+		};
+		partition@ubi1 {
+			reg = <0x00200000 0x00e00000>;
+			label = "ubi1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db-dxbc2.dts b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
new file mode 100644
index 000000000000..02bef8dc4270
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db-dxbc2.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-DXBC2 board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx4251.dtsi"
+
+/ {
+	model = "Marvell Bobcat2 Evaluation Board";
+	compatible = "marvell,db-dxbc2", "marvell,armadaxp-98dx4251", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x20000000>; /* 512 MB */
+	};
+
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&sdio {
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	/* No CD or WP GPIOs */
+	broken-cd;
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
new file mode 100644
index 000000000000..d1b61dad0c46
--- /dev/null
+++ b/arch/arm/boot/dts/armada-xp-db-xc3-24g4xg.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for DB-XC3-24G4XG board
+ *
+ * Copyright (C) 2016 Allied Telesis Labs
+ *
+ * Based on armada-xp-db.dts
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the default
+ * 0xd0000000). The 0xf1000000 is the default used by the recent,
+ * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
+ * boards were delivered with an older version of the bootloader that
+ * left internal registers mapped at 0xd0000000. If you are in this
+ * situation, you should either update your bootloader (preferred
+ * solution) or the below Device Tree should be adjusted.
+ */
+
+/dts-v1/;
+#include "armada-xp-98dx3336.dtsi"
+
+/ {
+	model = "DB-XC3-24G4XG";
+	compatible = "marvell,db-xc3-24g4xg", "marvell,armadaxp-98dx3336", "marvell,armada-370-xp";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlyprintk";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0 0x00000000 0 0x40000000>; /* 1 GB */
+	};
+};
+
+&L2 {
+	arm,parity-enable;
+	marvell,ecc-enable;
+};
+
+&devbus_bootcs {
+	status = "okay";
+
+	/* Device Bus parameters are required */
+
+	/* Read parameters */
+	devbus,bus-width    = <16>;
+	devbus,turn-off-ps  = <60000>;
+	devbus,badr-skew-ps = <0>;
+	devbus,acc-first-ps = <124000>;
+	devbus,acc-next-ps  = <248000>;
+	devbus,rd-setup-ps  = <0>;
+	devbus,rd-hold-ps   = <0>;
+
+	/* Write parameters */
+	devbus,sync-enable = <0>;
+	devbus,wr-high-ps  = <60000>;
+	devbus,wr-low-ps   = <60000>;
+	devbus,ale-wr-ps   = <60000>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+
+		partition@u-boot {
+			reg = <0x00000000 0x00100000>;
+			label = "u-boot";
+		};
+		partition@u-boot-env {
+			reg = <0x00100000 0x00040000>;
+			label = "u-boot-env";
+		};
+		partition@unused {
+			reg = <0x00140000 0x00ec0000>;
+			label = "unused";
+		};
+
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts
index 7dd900f158be..75318fd0fc11 100644
--- a/arch/arm/boot/dts/armada-xp-db.dts
+++ b/arch/arm/boot/dts/armada-xp-db.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada XP evaluation board
  * (DB-78460-BP)
@@ -8,43 +9,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
   *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default
@@ -67,7 +31,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x80000000>; /* 2 GB */
 	};
@@ -75,7 +39,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -105,39 +72,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * All 6 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-			pcie@3,0 {
-				/* Port 0, Lane 2 */
-				status = "okay";
-			};
-			pcie@4,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -157,43 +91,37 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <25>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <27>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
+			};
+
+			bm@c0000 {
+				status = "okay";
 			};
 
 			mvsdio@d4000 {
@@ -216,17 +144,102 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
+			nand-controller@d0000 {
 				status = "okay";
 
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p64", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
+					};
 				};
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * All 6 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+	pcie@3,0 {
+		/* Port 0, Lane 2 */
+		status = "okay";
+	};
+	pcie@4,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <25>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <27>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p64", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index bf724ca96a33..d1d348b91c0a 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada XP development board
  * (DB-MV784MP-GP)
@@ -8,44 +9,6 @@
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the default
  * 0xd0000000). The 0xf1000000 is the default used by the recent,
@@ -68,7 +31,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		/*
                  * 8 GB of plug-in RAM modules by default.The amount
@@ -94,7 +57,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -124,27 +90,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * The 3 slots are physically present as
-			 * standard PCIe slots on the board.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-			pcie@9,0 {
-				/* Port 2, Lane 0 */
-				status = "okay";
-			};
-			pcie@10,0 {
-				/* Port 3, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			serial@12000 {
 				status = "okay";
@@ -172,43 +117,33 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <16>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <17>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <18>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <19>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "qsgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 
 			/* Front-side USB slot */
@@ -221,25 +156,75 @@
 				status = "okay";
 			};
 
-			spi0: spi@10600 {
+			bm@c0000 {
 				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "n25q128a13", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <108000000>;
-				};
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
 			};
 		};
+
+		bm-bppi {
+			status = "okay";
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+
+	/*
+	 * The 3 slots are physically present as
+	 * standard PCIe slots on the board.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie@9,0 {
+		/* Port 2, Lane 0 */
+		status = "okay";
+	};
+	pcie@a,0 {
+		/* Port 3, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <16>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <17>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <18>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <19>;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <108000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
index 06a6a6c1fdf7..0dad95ea26c2 100644
--- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
+++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Lenovo Iomega ix4-300d
  *
  * Copyright (C) 2014, Benoit Masson <yahoo@perenite.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -57,46 +20,22 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x20000000>; /* 512MB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Quad port sata: Marvell 88SX7042 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* USB 3.0 xHCI controller: NEC D720200F1 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
+			MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				pinctrl-0 = <&ge0_rgmii_pins>;
 				pinctrl-names = "default";
@@ -142,49 +81,53 @@
 
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0xe0000>;
-					read-only;
-				};
 
-				partition@e0000 {
-					label = "u-boot-env";
-					reg = <0xe0000 0x20000>;
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u-boot-env2";
-					reg = <0x100000 0x20000>;
-					read-only;
-				};
-
-				partition@120000 {
-					label = "zImage";
-					reg = <0x120000 0x400000>;
-				};
-
-				partition@520000 {
-					label = "initrd";
-					reg = <0x520000 0x400000>;
-				};
-
-				partition@xE00000 {
-					label = "boot";
-					reg = <0xE00000 0x3F200000>;
-				};
-
-				partition@flash {
-					label = "flash";
-					reg = <0x0 0x40000000>;
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
+
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
+
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
+
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
+
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
+					};
 				};
 			};
 		};
@@ -221,7 +164,7 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		status = "okay";
 		gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>;
@@ -292,6 +235,31 @@
 		gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
 	};
 };
+&pciec {
+	status = "okay";
+
+	/* Quad port sata: Marvell 88SX7042 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* USB 3.0 xHCI controller: NEC D720200F1 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
 
 &pinctrl {
 	poweroff_pin: poweroff-pin {
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index fdd187c55aa5..7a0614fd0c93 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for the Linksys WRT1900AC (Mamba).
  *
@@ -13,38 +14,6 @@
  *     Copyright (C) 2013 Marvell
  *
  *     Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -62,36 +31,17 @@
 		stdout-path = &uart0;
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x00000000 0x00000000 0x10000000>; /* 256MB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Etron EJ168 USB 3.0 controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* First mini-PCIe port */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Second mini-PCIe port */
-			pcie@3,0 {
-				/* Port 0, Lane 3 */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
 
 		internal-regs {
 
@@ -115,6 +65,9 @@
 				pinctrl-names = "default";
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
+				bm,pool-short = <1>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -126,6 +79,9 @@
 				pinctrl-names = "default";
 				status = "okay";
 				phy-mode = "rgmii-id";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
+				bm,pool-short = <3>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
@@ -176,6 +132,7 @@
 					esata@4 {
 						label = "mamba:white:esata";
 						reg = <0x4>;
+						linux,default-trigger = "disk-activity";
 					};
 
 					usb2@5 {
@@ -205,110 +162,31 @@
 				};
 			};
 
-			nand@d0000 {
+			bm@c8000 {
 				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x100000>;  /* 1MB */
-					read-only;
-				};
-
-				partition@100000 {
-					label = "u_env";
-					reg = <0x100000 0x40000>;    /* 256KB */
-				};
-
-				partition@140000 {
-					label = "s_env";
-					reg = <0x140000 0x40000>;    /* 256KB */
-				};
-
-				partition@900000 {
-					label = "devinfo";
-					reg = <0x900000 0x100000>;   /* 1MB */
-					read-only;
-				};
-
-				/* kernel1 overlaps with rootfs1 by design */
-				partition@a00000 {
-					label = "kernel1";
-					reg = <0xa00000 0x2800000>;  /* 40MB */
-				};
-
-				partition@d00000 {
-					label = "rootfs1";
-					reg = <0xd00000 0x2500000>;  /* 37MB */
-				};
-
-				/* kernel2 overlaps with rootfs2 by design */
-				partition@3200000 {
-					label = "kernel2";
-					reg = <0x3200000 0x2800000>; /* 40MB */
-				};
-
-				partition@3500000 {
-					label = "rootfs2";
-					reg = <0x3500000 0x2500000>; /* 37MB */
-				};
-
-				/*
-				 * 38MB, last MB is for the BBT, not writable
-				 */
-				partition@5a00000 {
-					label = "syscfg";
-					reg = <0x5a00000 0x2600000>;
-				};
-
-				/*
-				 * Unused area between "s_env" and "devinfo".
-				 * Moved here because otherwise the renumbered
-				 * partitions would break the bootloader
-				 * supplied bootargs
-				 */
-				partition@180000 {
-					label = "unused_area";
-					reg = <0x180000 0x780000>;   /* 7.5MB */
-				};
 			};
+		};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <40000000>;
-				};
-			};
+		bm-bppi {
+			status = "okay";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		pinctrl-0 = <&keys_pin>;
 		pinctrl-names = "default";
 
-		button@1 {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
-			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
 		};
 
-		button@2 {
+		button-reset {
 			label = "Factory Reset Button";
 			linux,code = <KEY_RESTART>;
-			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
 		};
 	};
 
@@ -317,34 +195,85 @@
 		pinctrl-0 = <&power_led_pin>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "mamba:white:power";
 			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
-	gpio_fan {
+	pwm_fan {
 		/* SUNON HA4010V4-0000-C99 */
-		compatible = "gpio-fan";
-		gpios = <&gpio0 24 0>;
 
-		gpio-fan,speed-map = <0    0
-				      4500 1>;
+		compatible = "pwm-fan";
+		pwms = <&gpio0 24 4000>;
 	};
+};
 
-	dsa@0 {
-		compatible = "marvell,dsa";
-		#address-cells = <2>;
-		#size-cells = <0>;
+&pciec {
+	status = "okay";
+
+	/* Etron EJ168 USB 3.0 controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
 
-		dsa,ethernet = <&eth0>;
-		dsa,mii-bus = <&mdio>;
+	/* First mini-PCIe port */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
 
-		switch@0 {
+	/* Second mini-PCIe port */
+	pcie@3,0 {
+		/* Port 0, Lane 3 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+
+	keys_pin: keys-pin {
+		marvell,pins = "mpp32", "mpp33";
+		marvell,function = "gpio";
+	};
+
+	power_led_pin: power-led-pin {
+		marvell,pins = "mpp40";
+		marvell,function = "gpio";
+	};
+
+	gpio_fan_pin: gpio-fan-pin {
+		marvell,pins = "mpp24";
+		marvell,function = "gpio";
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	switch@0 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			reg = <0x0 0>;	/* MDIO address 0, switch 0 in tree */
 
 			port@0 {
 				reg = <0>;
@@ -373,26 +302,96 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
+				ethernet = <&eth0>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
 			};
 		};
 	};
 };
 
-&pinctrl {
+&nand_controller {
+	status = "okay";
 
-	keys_pin: keys-pin {
-		marvell,pins = "mpp32", "mpp33";
-		marvell,function = "gpio";
-	};
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
 
-	power_led_pin: power-led-pin {
-		marvell,pins = "mpp40";
-		marvell,function = "gpio";
-	};
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
 
-	gpio_fan_pin: gpio-fan-pin {
-		marvell,pins = "mpp24";
-		marvell,function = "gpio";
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x100000>;  /* 1MB */
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u_env";
+				reg = <0x100000 0x40000>;    /* 256KB */
+			};
+
+			partition@140000 {
+				label = "s_env";
+				reg = <0x140000 0x40000>;    /* 256KB */
+			};
+
+			partition@900000 {
+				label = "devinfo";
+				reg = <0x900000 0x100000>;   /* 1MB */
+				read-only;
+			};
+
+			/* kernel1 overlaps with rootfs1 by design */
+			partition@a00000 {
+				label = "kernel1";
+				reg = <0xa00000 0x2800000>;  /* 40MB */
+			};
+
+			partition@d00000 {
+				label = "rootfs1";
+				reg = <0xd00000 0x2500000>;  /* 37MB */
+			};
+
+			/* kernel2 overlaps with rootfs2 by design */
+			partition@3200000 {
+				label = "kernel2";
+				reg = <0x3200000 0x2800000>; /* 40MB */
+			};
+
+			partition@3500000 {
+				label = "rootfs2";
+				reg = <0x3500000 0x2500000>; /* 37MB */
+			};
+
+			/*
+			 * 38MB, last MB is for the BBT, not writable
+			 */
+			partition@5a00000 {
+				label = "syscfg";
+				reg = <0x5a00000 0x2600000>;
+			};
+
+			/*
+			 * Unused area between "s_env" and "devinfo".
+			 * Moved here because otherwise the renumbered
+			 * partitions would break the bootloader
+			 * supplied bootargs
+			 */
+			partition@180000 {
+				label = "unused_area";
+				reg = <0x180000 0x780000>;   /* 7.5MB */
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts
index f894bc83e957..1395cea12759 100644
--- a/arch/arm/boot/dts/armada-xp-matrix.dts
+++ b/arch/arm/boot/dts/armada-xp-matrix.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Marvell Armada XP Matrix board
  *
  * Copyright (C) 2013 Marvell
  *
  * Lior Amsalem <alior@marvell.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -55,7 +18,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		/*
 		 * This board has 4 GB of RAM, but the last 256 MB of
@@ -67,7 +30,9 @@
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 			serial@12000 {
@@ -97,18 +62,18 @@
 				};
 			};
 
-			pcie-controller {
-				status = "okay";
-
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-			};
-
 			usb@50000 {
 				status = "okay";
 			};
 		};
 	};
 };
+
+&pciec {
+	status = "okay";
+
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 6e6d0f04bf2b..5ea9d509cd30 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -5,44 +6,6 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP MV78230 SoC that are not
  * common to all Armada XP SoCs.
  */
@@ -86,7 +49,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x1 only.
 		 */
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -114,113 +77,176 @@
 				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
 				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <17>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>;
+				clocks = <&coreclk 0>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index c5fdc99f0dbe..6c6fbb9faf5a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -5,44 +6,6 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP MV78260 SoC that are not
  * common to all Armada XP SoCs.
  */
@@ -87,7 +50,7 @@
 		 * configured as x4 or quad x1 lanes. One unit is
 		 * x4 only.
 		 */
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -129,185 +92,293 @@
 				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
 				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 10>;
 				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 12>;
 				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 26>;
 				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
index 0e24f1a38540..16185edf9aa5 100644
--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -5,44 +6,6 @@
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP MV78460 SoC that are not
  * common to all Armada XP SoCs.
  */
@@ -104,7 +67,7 @@
 		 * configured as x4 or quad x1 lanes. Two units are
 		 * x4/x1.
 		 */
-		pcie-controller {
+		pciec: pcie@82000000 {
 			compatible = "marvell,armada-xp-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -150,202 +113,321 @@
 				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
 				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
 
-			pcie@1,0 {
+			pcie1: pcie@1,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 				reg = <0x0800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 58>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 58>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 5>;
 				status = "disabled";
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@2,0 {
+			pcie2: pcie@2,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 59>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 59>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+						<0 0 0 2 &pcie2_intc 1>,
+						<0 0 0 3 &pcie2_intc 2>,
+						<0 0 0 4 &pcie2_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 6>;
 				status = "disabled";
+
+				pcie2_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@3,0 {
+			pcie3: pcie@3,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
 				reg = <0x1800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 60>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
 					  0x81000000 0 0 0x81000000 0x3 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 60>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+						<0 0 0 2 &pcie3_intc 1>,
+						<0 0 0 3 &pcie3_intc 2>,
+						<0 0 0 4 &pcie3_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 7>;
 				status = "disabled";
+
+				pcie3_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@4,0 {
+			pcie4: pcie@4,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
 				reg = <0x2000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 61>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
 					  0x81000000 0 0 0x81000000 0x4 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 61>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie4_intc 0>,
+						<0 0 0 2 &pcie4_intc 1>,
+						<0 0 0 3 &pcie4_intc 2>,
+						<0 0 0 4 &pcie4_intc 3>;
 				marvell,pcie-port = <0>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 8>;
 				status = "disabled";
+
+				pcie4_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@5,0 {
+			pcie5: pcie@5,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
 				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 62>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
 					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 62>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie5_intc 0>,
+						<0 0 0 2 &pcie5_intc 1>,
+						<0 0 0 3 &pcie5_intc 2>,
+						<0 0 0 4 &pcie5_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 9>;
 				status = "disabled";
+
+				pcie5_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@6,0 {
+			pcie6: pcie@6,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
 				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 63>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
 					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 63>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie6_intc 0>,
+						<0 0 0 2 &pcie6_intc 1>,
+						<0 0 0 3 &pcie6_intc 2>,
+						<0 0 0 4 &pcie6_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <1>;
 				clocks = <&gateclk 10>;
 				status = "disabled";
+
+				pcie6_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@7,0 {
+			pcie7: pcie@7,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
 				reg = <0x3800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 64>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
 					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 64>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie7_intc 0>,
+						<0 0 0 2 &pcie7_intc 1>,
+						<0 0 0 3 &pcie7_intc 2>,
+						<0 0 0 4 &pcie7_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <2>;
 				clocks = <&gateclk 11>;
 				status = "disabled";
+
+				pcie7_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@8,0 {
+			pcie8: pcie@8,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
 				reg = <0x4000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 65>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
 					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 65>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie8_intc 0>,
+						<0 0 0 2 &pcie8_intc 1>,
+						<0 0 0 3 &pcie8_intc 2>,
+						<0 0 0 4 &pcie8_intc 3>;
 				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <3>;
 				clocks = <&gateclk 12>;
 				status = "disabled";
+
+				pcie8_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@9,0 {
+			pcie9: pcie@9,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
 				reg = <0x4800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 99>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
 					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie9_intc 0>,
+						<0 0 0 2 &pcie9_intc 1>,
+						<0 0 0 3 &pcie9_intc 2>,
+						<0 0 0 4 &pcie9_intc 3>;
 				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 26>;
 				status = "disabled";
+
+				pcie9_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie@10,0 {
+			pcie10: pcie@a,0 {
 				device_type = "pci";
 				assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
 				reg = <0x5000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
+				interrupt-names = "intx";
+				interrupts-extended = <&mpic 103>;
 				#interrupt-cells = <1>;
 				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
 					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
+				bus-range = <0x00 0xff>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie10_intc 0>,
+						<0 0 0 2 &pcie10_intc 1>,
+						<0 0 0 3 &pcie10_intc 2>,
+						<0 0 0 4 &pcie10_intc 3>;
 				marvell,pcie-port = <3>;
 				marvell,pcie-lane = <0>;
 				clocks = <&gateclk 27>;
 				status = "disabled";
+
+				pcie10_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
 		internal-regs {
 			gpio0: gpio@18100 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18100 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18100 0x40>, <0x181c0 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <82>, <83>, <84>, <85>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio1: gpio@18140 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x18140 0x40>;
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
+				reg = <0x18140 0x40>, <0x181c8 0x08>;
+				reg-names = "gpio", "pwm";
 				ngpios = <32>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				#pwm-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
 				interrupts = <87>, <88>, <89>, <90>;
+				clocks = <&coreclk 0>;
 			};
 
 			gpio2: gpio@18180 {
-				compatible = "marvell,orion-gpio";
+				compatible = "marvell,armada-370-gpio",
+					     "marvell,orion-gpio";
 				reg = <0x18180 0x40>;
 				ngpios = <3>;
 				gpio-controller;
diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
index 1516fc2627f9..31933f81144e 100644
--- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
+++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts
@@ -1,45 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for NETGEAR ReadyNAS 2120
  *
  * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -56,86 +19,28 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x80000000>; /* 2GB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/* Connected to first Marvell 88SE9170 SATA controller */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/* Connected to second Marvell 88SE9170 SATA controller */
-			pcie@2,0 {
-				/* Port 0, Lane 1 */
-				status = "okay";
-			};
-
-			/* Connected to Fresco Logic FL1009 USB 3.0 controller */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
-			/* Two rear eSATA ports */
-			sata@a0000 {
-				nr-ports = <2>;
-				status = "okay";
-			};
 
-			serial@12000 {
-				status = "okay";
-			};
-
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1318 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1318 */
-					reg = <1>;
-				};
-			};
-
-			ethernet@70000 {
-				status = "okay";
-				phy = <&phy0>;
-				phy-mode = "rgmii-id";
-			};
-
-			ethernet@74000 {
-				status = "okay";
-				phy = <&phy1>;
-				phy-mode = "rgmii-id";
-			};
-
-			/* Front USB 2.0 port */
-			usb@50000 {
-				status = "okay";
+			/* RTC is provided by Intersil ISL12057 I2C RTC chip */
+			rtc@10300 {
+				status = "disabled";
 			};
 
 			i2c@11000 {
-				compatible = "marvell,mv64xxx-i2c";
 				clock-frequency = <400000>;
 				status = "okay";
 
-				isl12057: isl12057@68 {
-					compatible = "isil,isl12057";
-					reg = <0x68>;
-					isil,irq2-can-wakeup-machine;
-				};
-
 				/* Controller for rear fan #1 of 3 (Protechnic
 				 * MGT4012XB-O20, 8000RPM) near eSATA port */
 				g762_fan1: g762@3e {
@@ -172,56 +77,55 @@
 					compatible = "gmt,g751";
 					reg = <0x4c>;
 				};
+
+				isl12057: rtc@68 {
+					compatible = "isil,isl12057";
+					reg = <0x68>;
+					wakeup-source;
+				};
 			};
 
-			nand@d0000 {
+			serial@12000 {
 				status = "okay";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				marvell,nand-enable-arbiter;
-				nand-on-flash-bbt;
-
-				/* Use Hardware BCH ECC */
-				nand-ecc-strength = <4>;
-				nand-ecc-step-size = <512>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0000000 0x180000>;  /* 1.5MB */
-					read-only;
-				};
+			};
 
-				partition@180000 {
-					label = "u-boot-env";
-					reg = <0x180000 0x20000>;    /* 128KB */
-					read-only;
-				};
+			/* Front USB 2.0 port */
+			usb@50000 {
+				status = "okay";
+			};
 
-				partition@200000 {
-					label = "uImage";
-					reg = <0x0200000 0x600000>;    /* 6MB */
-				};
+			ethernet@70000 {
+				pinctrl-0 = <&ge0_rgmii_pins>;
+				pinctrl-names = "default";
 
-				partition@800000 {
-					label = "minirootfs";
-					reg = <0x0800000 0x400000>;    /* 4MB */
-				};
+				status = "okay";
+				phy = <&phy0>;
+				phy-mode = "rgmii-id";
+			};
 
-				/* Last MB is for the BBT, i.e. not writable */
-				partition@c00000 {
-					label = "ubifs";
-					reg = <0x0c00000 0x7400000>; /* 116MB */
-				};
+			ethernet@74000 {
+				pinctrl-0 = <&ge1_rgmii_pins>;
+				pinctrl-names = "default";
+
+				status = "okay";
+				phy = <&phy1>;
+				phy-mode = "rgmii-id";
+			};
+
+			/* Two rear eSATA ports */
+			sata@a0000 {
+				nr-ports = <2>;
+				status = "okay";
 			};
 		};
 	};
 
 	clocks {
-	       g762_clk: g762-oscillator {
-			 compatible = "fixed-clock";
-			 #clock-cells = <0>;
-			 clock-frequency = <32768>;
-	       };
+		g762_clk: g762-oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	gpio-leds {
@@ -287,6 +191,39 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/* Connected to first Marvell 88SE9170 SATA controller */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/* Connected to second Marvell 88SE9170 SATA controller */
+	pcie@2,0 {
+		/* Port 0, Lane 1 */
+		status = "okay";
+	};
+
+	/* Connected to Fresco Logic FL1009 USB 3.0 controller */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1318 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1318 */
+		reg = <1>;
+	};
+};
+
+
 &pinctrl {
 	poweroff: poweroff {
 		marvell,pins = "mpp42";
@@ -368,3 +305,53 @@
 		marvell,function = "gpio";
 	};
 };
+
+&nand_controller {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+
+		/* Use Hardware BCH ECC */
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0x0000000 0x180000>;  /* 1.5MB */
+				read-only;
+			};
+
+			partition@180000 {
+				label = "u-boot-env";
+				reg = <0x180000 0x20000>;    /* 128KB */
+				read-only;
+			};
+
+			partition@200000 {
+				label = "uImage";
+				reg = <0x0200000 0x600000>;    /* 6MB */
+			};
+
+			partition@800000 {
+				label = "minirootfs";
+				reg = <0x0800000 0x400000>;    /* 4MB */
+			};
+
+			/* Last MB is for the BBT, i.e. not writable */
+			partition@c00000 {
+				label = "ubifs";
+				reg = <0x0c00000 0x7400000>; /* 116MB */
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 990e8a2100f0..1ecf72a61bca 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -1,47 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for OpenBlocks AX3-4 board
  *
  * Copyright (C) 2012 Marvell
  *
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -57,7 +20,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x40000000>; /* 1 GB soldered on */
 	};
@@ -65,7 +28,10 @@
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
-			  MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+			  MBUS_ID(0x01, 0x2f) 0 0 0xe8000000 0x8000000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0 0xd1200000 0x100000>;
 
 		devbus-bootcs {
 			status = "okay";
@@ -95,15 +61,6 @@
 			};
 		};
 
-		pcie-controller {
-			status = "okay";
-			/* Internal mini-PCIe connector */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-		};
-
 		internal-regs {
 			rtc@10300 {
 				/* No crystal connected to the internal RTC */
@@ -140,55 +97,43 @@
 				};
 			};
 
-			gpio_keys {
+			gpio-keys {
 				compatible = "gpio-keys";
-				#address-cells = <1>;
-				#size-cells = <0>;
 
-				button@1 {
+				button-init {
 					label = "Init Button";
 					linux,code = <KEY_POWER>;
 					gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
 				};
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 {
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 {
-					reg = <1>;
-				};
-
-				phy2: ethernet-phy@2 {
-					reg = <2>;
-				};
-
-				phy3: ethernet-phy@3 {
-					reg = <3>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				phy = <&phy0>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <0>;
 			};
 			ethernet@74000 {
 				status = "okay";
 				phy = <&phy1>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <1>;
 			};
 			ethernet@30000 {
 				status = "okay";
 				phy = <&phy2>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <2>;
 			};
 			ethernet@34000 {
 				status = "okay";
 				phy = <&phy3>;
 				phy-mode = "sgmii";
+				buffer-manager = <&bm>;
+				bm,pool-long = <3>;
 			};
 			i2c@11000 {
 				status = "okay";
@@ -217,10 +162,45 @@
 			usb@51000 {
 				status = "okay";
 			};
+
+			bm@c0000 {
+				status = "okay";
+			};
+		};
+
+		bm-bppi {
+			status = "okay";
 		};
 	};
 };
 
+&pciec {
+	status = "okay";
+	/* Internal mini-PCIe connector */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+};
+
+&mdio {
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+
+	phy2: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	phy3: ethernet-phy@3 {
+		reg = <3>;
+	};
+};
+
 &pinctrl {
 	led_pins: led-pins-0 {
 		marvell,pins = "mpp49", "mpp51", "mpp53";
diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
index 20267ad2f61e..5551bac1962c 100644
--- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts
+++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree file for Synology DS414
  *
  * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Note: this Device Tree assumes that the bootloader has remapped the
  * internal registers to 0xf1000000 (instead of the old 0xd0000000).
  * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
@@ -70,36 +33,16 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0 0x00000000 0 0x40000000>; /* 1GB */
 	};
 
 	soc {
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
-			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
-
-		pcie-controller {
-			status = "okay";
-
-			/*
-			 * Connected to Marvell 88SX7042 SATA-II controller
-			 * handling the four disks.
-			 */
-			pcie@1,0 {
-				/* Port 0, Lane 0 */
-				status = "okay";
-			};
-
-			/*
-			 * Connected to EtronTech EJ168A XHCI controller
-			 * providing the two rear USB 3.0 ports.
-			 */
-			pcie@5,0 {
-				/* Port 1, Lane 0 */
-				status = "okay";
-			};
-		};
+			  MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
 
 		internal-regs {
 
@@ -108,62 +51,6 @@
 				status = "disabled";
 			};
 
-			spi0: spi@10600 {
-				status = "okay";
-
-				spi-flash@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "micron,n25q064", "jedec,spi-nor";
-					reg = <0>; /* Chip select 0 */
-					spi-max-frequency = <20000000>;
-
-					/*
-					 * Warning!
-					 *
-					 * Synology u-boot uses its compiled-in environment
-					 * and it seems Synology did not care to change u-boot
-					 * default configuration in order to allow saving a
-					 * modified environment at a sensible location. So,
-					 * if you do a 'saveenv' under u-boot, your modified
-					 * environment will be saved at 1MB after the start
-					 * of the flash, i.e. in the middle of the uImage.
-					 * For that reason, it is strongly advised not to
-					 * change the default environment, unless you know
-					 * what you are doing.
-					 */
-					partition@00000000 { /* u-boot */
-						label = "RedBoot";
-						reg = <0x00000000 0x000d0000>; /* 832KB */
-					};
-
-					partition@000c0000 { /* uImage */
-						label = "zImage";
-						reg = <0x000d0000 0x002d0000>; /* 2880KB */
-					};
-
-					partition@003a0000 { /* uInitramfs */
-						label = "rd.gz";
-						reg = <0x003a0000 0x00430000>; /* 4250KB */
-					};
-
-					partition@007d0000 { /* MAC address and serial number */
-						label = "vendor";
-						reg = <0x007d0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007e0000 {
-						label = "RedBoot config";
-						reg = <0x007e0000 0x00010000>; /* 64KB */
-					};
-
-					partition@007f0000 {
-						label = "FIS directory";
-						reg = <0x007f0000 0x00010000>; /* 64KB */
-					};
-				};
-			};
-
 			i2c@11000 {
 				clock-frequency = <400000>;
 				status = "okay";
@@ -204,16 +91,6 @@
 				status = "okay";
 			};
 
-			mdio {
-				phy0: ethernet-phy@0 { /* Marvell 88E1512 */
-					reg = <0>;
-				};
-
-				phy1: ethernet-phy@1 { /* Marvell 88E1512 */
-					reg = <1>;
-				};
-			};
-
 			ethernet@70000 {
 				status = "okay";
 				pinctrl-0 = <&ge0_rgmii_pins>;
@@ -240,7 +117,7 @@
 			     &sata3_pwr_pin &sata4_pwr_pin>;
 		pinctrl-names = "default";
 
-		sata1_regulator: sata1-regulator {
+		sata1_regulator: sata1-regulator@1 {
 			compatible = "regulator-fixed";
 			reg = <1>;
 			regulator-name = "SATA1 Power";
@@ -253,7 +130,7 @@
 			gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata2_regulator: sata2-regulator {
+		sata2_regulator: sata2-regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
 			regulator-name = "SATA2 Power";
@@ -266,7 +143,7 @@
 			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata3_regulator: sata3-regulator {
+		sata3_regulator: sata3-regulator@3 {
 			compatible = "regulator-fixed";
 			reg = <3>;
 			regulator-name = "SATA3 Power";
@@ -279,7 +156,7 @@
 			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 		};
 
-		sata4_regulator: sata4-regulator {
+		sata4_regulator: sata4-regulator@4 {
 			compatible = "regulator-fixed";
 			reg = <4>;
 			regulator-name = "SATA4 Power";
@@ -294,6 +171,39 @@
 	};
 };
 
+&pciec {
+	status = "okay";
+
+	/*
+	 * Connected to Marvell 88SX7042 SATA-II controller
+	 * handling the four disks.
+	 */
+	pcie@1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+
+	/*
+	 * Connected to EtronTech EJ168A XHCI controller
+	 * providing the two rear USB 3.0 ports.
+	 */
+	pcie@5,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+
+&mdio {
+	phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+		reg = <0>;
+	};
+
+	phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+		reg = <1>;
+	};
+};
+
 &pinctrl {
 	sata1_pwr_pin: sata1-pwr-pin {
 		marvell,pins = "mpp42";
@@ -360,3 +270,59 @@
 		marvell,function = "gpio";
 	};
 };
+
+&spi0 {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>; /* Chip select 0 */
+		spi-max-frequency = <20000000>;
+
+		/*
+		 * Warning!
+		 *
+		 * Synology u-boot uses its compiled-in environment
+		 * and it seems Synology did not care to change u-boot
+		 * default configuration in order to allow saving a
+		 * modified environment at a sensible location. So,
+		 * if you do a 'saveenv' under u-boot, your modified
+		 * environment will be saved at 1MB after the start
+		 * of the flash, i.e. in the middle of the uImage.
+		 * For that reason, it is strongly advised not to
+		 * change the default environment, unless you know
+		 * what you are doing.
+		 */
+		partition@0 { /* u-boot */
+			label = "RedBoot";
+			reg = <0x00000000 0x000d0000>; /* 832KB */
+		};
+
+		partition@c0000 { /* uImage */
+			label = "zImage";
+			reg = <0x000d0000 0x002d0000>; /* 2880KB */
+		};
+
+		partition@3a0000 { /* uInitramfs */
+			label = "rd.gz";
+			reg = <0x003a0000 0x00430000>; /* 4250KB */
+		};
+
+		partition@7d0000 { /* MAC address and serial number */
+			label = "vendor";
+			reg = <0x007d0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7e0000 {
+			label = "RedBoot config";
+			reg = <0x007e0000 0x00010000>; /* 64KB */
+		};
+
+		partition@7f0000 {
+			label = "FIS directory";
+			reg = <0x007f0000 0x00010000>; /* 64KB */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 3de9b761cc1a..4297482da62f 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * Device Tree Include file for Marvell Armada XP family SoC
  *
@@ -8,44 +9,6 @@
  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
  * Ben Dooks <ben.dooks@codethink.co.uk>
  *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- *
  * Contains definitions specific to the Armada XP SoC that are not
  * common to all Armada SoCs.
  */
@@ -53,6 +16,9 @@
 #include "armada-370-xp.dtsi"
 
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
 	model = "Marvell Armada XP family SoC";
 	compatible = "marvell,armadaxp", "marvell,armada-370-xp";
 
@@ -70,12 +36,12 @@
 		};
 
 		internal-regs {
-			sdramc@1400 {
+			sdramc: sdramc@1400 {
 				compatible = "marvell,armada-xp-sdram-controller";
 				reg = <0x1400 0x500>;
 			};
 
-			L2: l2-cache {
+			L2: l2-cache@8000 {
 				compatible = "marvell,aurora-system-cache";
 				reg = <0x08000 0x1000>;
 				cache-id-part = <0x100>;
@@ -84,29 +50,6 @@
 				wt-override;
 			};
 
-			spi0: spi@10600 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-				pinctrl-0 = <&spi0_pins>;
-				pinctrl-names = "default";
-			};
-
-			spi1: spi@10680 {
-				compatible = "marvell,armada-xp-spi",
-						"marvell,orion-spi";
-			};
-
-
-			i2c0: i2c@11000 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x100>;
-			};
-
-			i2c1: i2c@11100 {
-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
-				reg = <0x11100 0x100>;
-			};
-
 			uart2: serial@12200 {
 				compatible = "snps,dw-apb-uart";
 				pinctrl-0 = <&uart2_pins>;
@@ -131,7 +74,7 @@
 				status = "disabled";
 			};
 
-			system-controller@18200 {
+			systemc: system-controller@18200 {
 				compatible = "marvell,armada-370-xp-system-controller";
 				reg = <0x18200 0x500>;
 			};
@@ -149,7 +92,7 @@
 				#clock-cells = <1>;
 			};
 
-			thermal@182b0 {
+			thermal: thermal@182b0 {
 				compatible = "marvell,armadaxp-thermal";
 				reg = <0x182b0 0x4
 					0x184d0 0x4>;
@@ -163,25 +106,9 @@
 				clocks = <&coreclk 1>;
 			};
 
-			interrupt-controller@20a00 {
-			      reg = <0x20a00 0x2d0>, <0x21070 0x58>;
-			};
-
-			timer@20300 {
-				compatible = "marvell,armada-xp-timer";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			watchdog@20300 {
-				compatible = "marvell,armada-xp-wdt";
-				clocks = <&coreclk 2>, <&refclk>;
-				clock-names = "nbclk", "fixed";
-			};
-
-			cpurst@20800 {
-				compatible = "marvell,armada-370-cpu-reset";
-				reg = <0x20800 0x20>;
+			cpu-config@21000 {
+				compatible = "marvell,armada-xp-cpu-config";
+				reg = <0x21000 0x8>;
 			};
 
 			eth2: ethernet@30000 {
@@ -192,15 +119,7 @@
 				status = "disabled";
 			};
 
-			usb@50000 {
-				clocks = <&gateclk 18>;
-			};
-
-			usb@51000 {
-				clocks = <&gateclk 19>;
-			};
-
-			usb@52000 {
+			usb2: usb@52000 {
 				compatible = "marvell,orion-ehci";
 				reg = <0x52000 0x500>;
 				interrupts = <47>;
@@ -208,7 +127,7 @@
 				status = "disabled";
 			};
 
-			xor@60900 {
+			xor1: xor@60900 {
 				compatible = "marvell,orion-xor";
 				reg = <0x60900 0x100
 				       0x60b00 0x100>;
@@ -236,7 +155,27 @@
 				compatible = "marvell,armada-xp-neta";
 			};
 
-			xor@f0900 {
+			cesa: crypto@90000 {
+				compatible = "marvell,armada-xp-crypto";
+				reg = <0x90000 0x10000>;
+				reg-names = "regs";
+				interrupts = <48>, <49>;
+				clocks = <&gateclk 23>, <&gateclk 23>;
+				clock-names = "cesa0", "cesa1";
+				marvell,crypto-srams = <&crypto_sram0>,
+						       <&crypto_sram1>;
+				marvell,crypto-sram-size = <0x800>;
+			};
+
+			bm: bm@c0000 {
+				compatible = "marvell,armada-380-neta-bm";
+				reg = <0xc0000 0xac>;
+				clocks = <&gateclk 13>;
+				internal-mem = <&bm_bppi>;
+				status = "disabled";
+			};
+
+			xor0: xor@f0900 {
 				compatible = "marvell,orion-xor";
 				reg = <0xF0900 0x100
 				       0xF0B00 0x100>;
@@ -256,6 +195,35 @@
 				};
 			};
 		};
+
+		crypto_sram0: sa-sram0 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
+		};
+
+		crypto_sram1: sa-sram1 {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
+			clocks = <&gateclk 23>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
+		};
+
+		bm_bppi: bm-bppi {
+			compatible = "mmio-sram";
+			reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&gateclk 13>;
+			no-memory-wc;
+			status = "disabled";
+		};
 	};
 
 	clocks {
@@ -268,6 +236,45 @@
 	};
 };
 
+&i2c0 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11000 0x100>;
+};
+
+&i2c1 {
+	compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+	reg = <0x11100 0x100>;
+};
+
+&mpic {
+	reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+};
+
+&timer {
+	compatible = "marvell,armada-xp-timer";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+};
+
+&watchdog {
+	compatible = "marvell,armada-xp-wdt";
+	clocks = <&coreclk 2>, <&refclk>;
+	clock-names = "nbclk", "fixed";
+	interrupts = <93>, <38>;
+};
+
+&cpurst {
+	reg = <0x20800 0x20>;
+};
+
+&usb0 {
+	clocks = <&gateclk 18>;
+};
+
+&usb1 {
+	clocks = <&gateclk 19>;
+};
+
 &pinctrl {
 	ge0_gmii_pins: ge0-gmii-pins {
 		marvell,pins =
@@ -308,6 +315,12 @@
 		marvell,function = "spi0";
 	};
 
+	spi1_pins: spi1-pins {
+		marvell,pins = "mpp13", "mpp14",
+			       "mpp16", "mpp17";
+		marvell,function = "spi1";
+	};
+
 	uart2_pins: uart2-pins {
 		marvell,pins = "mpp42", "mpp43";
 		marvell,function = "uart2";
@@ -318,3 +331,15 @@
 		marvell,function = "uart3";
 	};
 };
+
+&spi0 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+};
+
+&spi1 {
+	compatible = "marvell,armada-xp-spi", "marvell,orion-spi";
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/armv7-m.dtsi b/arch/arm/boot/dts/armv7-m.dtsi
index b1ad7cf6ac02..26f5443d85e1 100644
--- a/arch/arm/boot/dts/armv7-m.dtsi
+++ b/arch/arm/boot/dts/armv7-m.dtsi
@@ -1,7 +1,6 @@
-#include "skeleton.dtsi"
-
+// SPDX-License-Identifier: GPL-2.0
 / {
-	nvic: nv-interrupt-controller  {
+	nvic: interrupt-controller@e000e100  {
 		compatible = "arm,armv7m-nvic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/artpec6-devboard.dts b/arch/arm/boot/dts/artpec6-devboard.dts
new file mode 100644
index 000000000000..042a9cc920c6
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6-devboard.dts
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Axis ARTPEC-6 development board.
+
+/dts-v1/;
+#include "artpec6.dtsi"
+
+/ {
+	model = "ARTPEC-6 development board";
+	compatible = "axis,artpec6-dev-board", "axis,artpec6";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&ethernet {
+	status = "okay";
+
+	phy-handle = <&phy1>;
+	phy-mode = "gmii";
+
+	mdio {
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		compatible = "snps,dwmac-mdio";
+		phy1: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			device_type = "ethernet-phy";
+			reg = <0x0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/artpec6.dtsi b/arch/arm/boot/dts/artpec6.dtsi
new file mode 100644
index 000000000000..037157e6c5ee
--- /dev/null
+++ b/arch/arm/boot/dts/artpec6.dtsi
@@ -0,0 +1,388 @@
+/*
+ * Device Tree Source for the Axis ARTPEC-6 SoC
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/dma/nbpfaxi.h>
+#include <dt-bindings/clock/axis,artpec6-clkctrl.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "axis,artpec6";
+	interrupt-parent = <&intc>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			next-level-cache = <&pl310>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			next-level-cache = <&pl310>;
+		};
+	};
+
+	syscon: syscon@f8000000 {
+		compatible = "axis,artpec6-syscon", "syscon";
+		reg = <0xf8000000 0x48>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2", "arm,psci";
+		method = "smc";
+		psci_version = <0x84000000>;
+		cpu_on = <0x84000003>;
+		system_reset = <0x84000009>;
+	};
+
+	scu@faf00000 {
+		compatible = "arm,cortex-a9-scu";
+		reg = <0xfaf00000 0x58>;
+	};
+
+	/* Main external clock driving CPU and peripherals */
+	ext_clk: ext_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <50000000>;
+	};
+
+	eth_phy_ref_clk: eth_phy_ref_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	clkctrl: clkctrl@f8000000 {
+		#clock-cells = <1>;
+		compatible = "axis,artpec6-clkctrl";
+		reg = <0xf8000000 0x48>;
+		clocks = <&ext_clk>;
+		clock-names = "sys_refclk";
+	};
+
+	gtimer@faf00200 {
+		compatible = "arm,cortex-a9-global-timer";
+		reg = <0xfaf00200 0x20>;
+		interrupts = <GIC_PPI 11 0xf01>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+	};
+
+	timer@faf00600 {
+		compatible = "arm,cortex-a9-twd-timer";
+		reg = <0xfaf00600 0x20>;
+		interrupts = <GIC_PPI 13 0xf04>;
+		clocks = <&clkctrl ARTPEC6_CLK_CPU_PERIPH>;
+		status = "disabled";
+	};
+
+	intc: interrupt-controller@faf01000 {
+		interrupt-controller;
+		compatible = "arm,cortex-a9-gic";
+		#interrupt-cells = <3>;
+		reg = < 0xfaf01000 0x1000 >, < 0xfaf00100 0x0100 >;
+	};
+
+	pl310: cache-controller@faf10000 {
+		compatible = "arm,pl310-cache";
+		cache-unified;
+		cache-level = <2>;
+		reg = <0xfaf10000 0x1000>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		arm,data-latency = <1 1 1>;
+		arm,tag-latency = <1 1 1>;
+		arm,filter-ranges = <0x0 0x80000000>;
+		arm,double-linefill = <1>;
+		arm,double-linefill-incr = <0>;
+		arm,double-linefill-wrap = <0>;
+		prefetch-data = <1>;
+		prefetch-instr = <1>;
+		arm,prefetch-offset = <0>;
+		arm,prefetch-drop = <1>;
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	/*
+	 * Both pci nodes cannot be enabled at the same time,
+	 * leave the unwanted node as disabled.
+	 */
+	pcie: pcie@f8050000 {
+		compatible = "axis,artpec6-pcie", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x2000>;
+		reg-names = "dbi", "phy", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+			  /* downstream I/O */
+		ranges = <0x81000000 0 0 0xc0002000 0 0x00010000
+			  /* non-prefetchable memory */
+			  0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>;
+		num-lanes = <2>;
+		bus-range = <0x00 0xff>;
+		interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "msi";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0x7>;
+		interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pcie_ep: pcie_ep@f8050000 {
+		compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie";
+		reg = <0xf8050000 0x2000
+		       0xf8051000 0x2000
+		       0xf8040000 0x1000
+		       0xc0000000 0x20000000>;
+		reg-names = "dbi", "dbi2", "phy", "addr_space";
+		num-ib-windows = <6>;
+		num-ob-windows = <2>;
+		num-lanes = <2>;
+		axis,syscon-pcie = <&syscon>;
+		status = "disabled";
+	};
+
+	pinctrl: pinctrl@f801d000 {
+		compatible = "axis,artpec6-pinctrl";
+		reg = <0xf801d000 0x400>;
+
+		pinctrl_uart0: uart0grp {
+			function = "uart0";
+			groups = "uart0grp2";
+			bias-pull-up;
+		};
+		pinctrl_uart1: uart1grp {
+			function = "uart1";
+			groups = "uart1grp0";
+			bias-pull-up;
+		};
+		pinctrl_uart2: uart2grp {
+			function = "uart2";
+			groups = "uart2grp1";
+			bias-pull-up;
+		};
+		pinctrl_uart3: uart3grp {
+			function = "uart3";
+			groups = "uart3grp0";
+			bias-pull-up;
+		};
+	};
+
+	amba@0 {
+		compatible = "simple-bus";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+		ranges;
+		dma-ranges;
+
+		crypto@f4264000 {
+			compatible = "axis,artpec6-crypto";
+			reg = <0xf4264000 0x4000>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		dma0: dma@f8019000 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019000 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+		dma1: dma@f8019400 {
+			compatible = "renesas,nbpfaxi64dmac8b16";
+			reg = <0xf8019400 0x400>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* error */
+				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch12",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&clkctrl ARTPEC6_CLK_DMA_ACLK>;
+			#dma-cells = <2>;
+			dma-channels = <8>;
+			dma-requests = <8>;
+		};
+
+		ethernet: ethernet@f8010000 {
+			clock-names = "stmmaceth", "ptp_ref";
+			clocks = <&clkctrl ARTPEC6_CLK_ETH_ACLK>,
+				<&clkctrl ARTPEC6_CLK_PTP_REF>;
+			compatible = "snps,dwmac-4.10a", "snps,dwmac";
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_lpi";
+			reg = <0xf8010000 0x4000>;
+
+			snps,axi-config = <&stmmac_axi_setup>;
+			snps,mtl-rx-config = <&mtl_rx_setup>;
+			snps,mtl-tx-config = <&mtl_tx_setup>;
+
+			snps,txpbl = <8>;
+			snps,rxpbl = <2>;
+			snps,aal;
+			snps,tso;
+
+			status = "disabled";
+
+			stmmac_axi_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <1>;
+				snps,rd_osr_lmt = <15>;
+				/* If FB is disabled, the AXI master chooses
+				 * a burst length of any value less than the
+				 * maximum enabled burst length
+				 * (all lesser burst length enables are redundant).
+				 */
+				snps,blen = <0 0 0 0 16 0 0>;
+			};
+
+			mtl_rx_setup: rx-queues-config {
+				snps,rx-queues-to-use = <1>;
+				queue0 {};
+			};
+
+			mtl_tx_setup: tx-queues-config {
+				snps,tx-queues-to-use = <2>;
+				queue0 {};
+				queue1 {};
+			};
+		};
+
+		uart0: serial@f8036000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8036000 0x1000>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart0>;
+			dmas = <&dma0 4 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 5 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart1: serial@f8037000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8037000 0x1000>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart1>;
+			dmas = <&dma0 6 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma0 7 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart2: serial@f8038000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8038000 0x1000>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart2>;
+			dmas = <&dma1 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+		uart3: serial@f8039000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0xf8039000 0x1000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkctrl ARTPEC6_CLK_UART_REFCLK>,
+				<&clkctrl ARTPEC6_CLK_UART_PCLK>;
+			clock-names = "uart_clk", "apb_pclk";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_uart3>;
+			dmas = <&dma1 2 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>,
+			       <&dma1 3 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
new file mode 100644
index 000000000000..a497dd135491
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "AST2500 EVB";
+	compatible = "aspeed,ast2500-evb", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+/*
+ * Enable port A as device (via the virtual hub) and port B as
+ * host by default on the eval board. This can be easily changed
+ * by replacing the override below with &ehci0 { ... } to enable
+ * host on both ports.
+ */
+&vhub {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+     status = "okay";
+     memory-region = <&gfx_memory>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
new file mode 100644
index 000000000000..f34a2b1ec2f0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb-a1.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+
+#include "aspeed-ast2600-evb.dts"
+
+/ {
+	model = "AST2600 A1 EVB";
+	compatible = "aspeed,ast2600-evb-a1", "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	/delete-node/regulator-vcc-sdhci0;
+	/delete-node/regulator-vcc-sdhci1;
+	/delete-node/regulator-vccq-sdhci0;
+	/delete-node/regulator-vccq-sdhci1;
+};
+
+/delete-node/ &sdc;
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
new file mode 100644
index 000000000000..de83c0eb1d6e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "AST2600 EVB";
+	compatible = "aspeed,ast2600-evb", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	vcc_sdhci0: regulator-vcc-sdhci0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI0 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci0: regulator-vccq-sdhci0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+
+	vcc_sdhci1: regulator-vcc-sdhci1 {
+		compatible = "regulator-fixed";
+		regulator-name = "SDHCI1 Vcc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhci1: regulator-vccq-sdhci1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHCI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio0 ASPEED_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1>,
+			 <1800000 0>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+
+&mac1 {
+	status = "okay";
+
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&ethphy1>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default>;
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	clk-phase-mmc-hs200 = <9>, <225>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	temp@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c08";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&fsim0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdc {
+	status = "okay";
+};
+
+/*
+ * The signal voltage of sdhci0 and sdhci1 on AST2600-A2 EVB is able to be
+ * toggled by GPIO pins.
+ * In the reference design, GPIOV0 of AST2600-A2 EVB is connected to the
+ * power load switch that provides 3.3v to sdhci0 vdd, GPIOV1 is connected to
+ * a 1.8v and a 3.3v power load switch that provides signal voltage to
+ * sdhci0 bus.
+ * If GPIOV0 is active high, sdhci0 is enabled, otherwise, sdhci0 is disabled.
+ * If GPIOV1 is active high, 3.3v power load switch is enabled, sdhci0 signal
+ * voltage is 3.3v, otherwise, 1.8v power load switch will be enabled,
+ * sdhci0 signal voltage becomes 1.8v.
+ * AST2600-A2 EVB also supports toggling signal voltage for sdhci1.
+ * The design is the same as sdhci0, it uses GPIOV2 as power-gpio and GPIOV3
+ * as power-switch-gpio.
+ */
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci0>;
+	vqmmc-supply = <&vccq_sdhci0>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&sdhci1 {
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <100000000>;
+	sdhci-drive-type = /bits/ 8 <3>;
+	sdhci-caps-mask = <0x7 0x0>;
+	sdhci,wp-inverted;
+	vmmc-supply = <&vcc_sdhci1>;
+	vqmmc-supply = <&vccq_sdhci1>;
+	clk-phase-sd-hs = <7>, <200>;
+};
+
+&vhub {
+	status = "okay";
+	pinctrl-names = "default";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
new file mode 100644
index 000000000000..64bb9bf92de2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-daytonax.dts
@@ -0,0 +1,319 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD DaytonaX BMC";
+	compatible = "amd,daytonax-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		led-identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>,
+			<&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		&pinctrl_rxd1_default
+		&pinctrl_nrts1_default
+		&pinctrl_ndtr1_default
+		&pinctrl_ndsr1_default
+		&pinctrl_ncts1_default
+		&pinctrl_ndcd1_default
+		&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","led-fault","led-identify","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"id-button","","","","","","","",
+	/*D0-D7*/	"","","ASSERT_BMC_READY","","","","","",
+	/*E0-E7*/	"reset-button","reset-control","power-button","power-control","",
+			"power-good","power-ok","",
+	/*F0-F7*/	"","","","","","","BATTERY_DETECT","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"FM_BMC_READ_SPD_TEMP","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default
+		&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
new file mode 100644
index 000000000000..6bded774c457
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts
@@ -0,0 +1,346 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 AMD Inc.
+// Author: Supreeth Venkatesh <supreeth.venkatesh@amd.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "AMD EthanolX BMC";
+	compatible = "amd,ethanolx-bmc", "aspeed,ast2500";
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&uart1 {
+	//Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_nrts1_default
+		     &pinctrl_ncts1_default>;
+};
+
+&uart5 {
+	//BMC Console
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		     &pinctrl_adc1_default
+		     &pinctrl_adc2_default
+		     &pinctrl_adc3_default
+		     &pinctrl_adc4_default>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"","","FAULT_LED","CHASSIS_ID_LED","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"CHASSIS_ID_BTN","INTRUDER","AC_LOSS","","","","","",
+	/*D0-D7*/	"HDT_DBREQ","LOCAL_SPI_ROM_SEL","FPGA_SPI_ROM_SEL","JTAG_MUX_S",
+			"JTAG_MUX_OE","HDT_SEL","ASERT_WARM_RST_BTN","FPGA_RSVD",
+	/*E0-E7*/	"","","MON_P0_PWR_BTN","MON_P0_RST_BTN","MON_P0_NMI_BTN",
+			"MON_P0_PWR_GOOD","MON_PWROK","MON_RESET",
+	/*F0-F7*/	"MON_P0_PROCHOT","MON_P1_PROCHOT","MON_P0_THERMTRIP",
+			"MON_P1_THERMTRIP","P0_PRESENT","P1_PRESENT","MON_ATX_PWR_OK","",
+	/*G0-G7*/	"BRD_REV_ID_3","BRD_REV_ID_2","BRD_REV_ID_1","BRD_REV_ID_0",
+			"P0_APML_ALERT","P1_APML_ALERT","FPGA ALERT","",
+	/*H0-H7*/	"BRD_ID_0","BRD_ID_1","BRD_ID_2","BRD_ID_3",
+			"PCIE_DISCONNECTED","USB_DISCONNECTED","SPARE_0","SPARE_1",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"ASSERT_PWR_BTN","ASSERT_RST_BTN","ASSERT_NMI_BTN",
+			"ASSERT_LOCAL_LOCK","ASSERT_P0_PROCHOT","ASSERT_P1_PROCHOT",
+			"ASSERT_CLR_CMOS","ASSERT_BMC_READY",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"P0_VDD_CORE_RUN_VRHOT","P0_VDD_SOC_RUN_VRHOT",
+			"P0_VDD_MEM_ABCD_SUS_VRHOT","P0_VDD_MEM_EFGH_SUS_VRHOT",
+			"P1_VDD_CORE_RUN_VRHOT","P1_VDD_SOC_RUN_VRHOT",
+			"P1_VDD_MEM_ABCD_SUS_VRHOT","P1_VDD_MEM_EFGH_SUS_VRHOT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","SENSOR THERM","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+//APML for P0
+&i2c0 {
+	status = "okay";
+};
+
+//APML for P1
+&i2c1 {
+	status = "okay";
+};
+
+//FPGA
+&i2c2 {
+	status = "okay";
+};
+
+//24LC128 EEPROM
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+//P0 Power regulators
+&i2c4 {
+	status = "okay";
+};
+
+//P1 Power regulators
+&i2c5 {
+	status = "okay";
+};
+
+//P0/P1 Thermal diode
+&i2c6 {
+	status = "okay";
+};
+
+// Thermal Sensors
+&i2c7 {
+	status = "okay";
+
+	lm75a@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+	};
+
+	lm75a@49 {
+		compatible = "national,lm75a";
+		reg = <0x49>;
+	};
+
+	lm75a@4a {
+		compatible = "national,lm75a";
+		reg = <0x4a>;
+	};
+
+	lm75a@4b {
+		compatible = "national,lm75a";
+		reg = <0x4b>;
+	};
+
+	lm75a@4c {
+		compatible = "national,lm75a";
+		reg = <0x4c>;
+	};
+
+	lm75a@4d {
+		compatible = "national,lm75a";
+		reg = <0x4d>;
+	};
+
+	lm75a@4e {
+		compatible = "national,lm75a";
+		reg = <0x4e>;
+	};
+
+	lm75a@4f {
+		compatible = "national,lm75a";
+		reg = <0x4f>;
+	};
+};
+
+//BMC I2C
+&i2c8 {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x60>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x62>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x97DE>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>, <0x81>;
+};
+
+&lpc_ctrl {
+	//Enable lpc clock
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x3f8>;
+	aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
new file mode 100644
index 000000000000..0a51d2e32fab
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt. Jade BMC";
+	compatible = "ampere,mtjade-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 *  i2c bus 50-57 assigned to NVMe slot 0-7
+		 */
+		i2c50 = &nvmeslot_0;
+		i2c51 = &nvmeslot_1;
+		i2c52 = &nvmeslot_2;
+		i2c53 = &nvmeslot_3;
+		i2c54 = &nvmeslot_4;
+		i2c55 = &nvmeslot_5;
+		i2c56 = &nvmeslot_6;
+		i2c57 = &nvmeslot_7;
+
+		/*
+		 *  i2c bus 60-67 assigned to NVMe slot 8-15
+		 */
+		i2c60 = &nvmeslot_8;
+		i2c61 = &nvmeslot_9;
+		i2c62 = &nvmeslot_10;
+		i2c63 = &nvmeslot_11;
+		i2c64 = &nvmeslot_12;
+		i2c65 = &nvmeslot_13;
+		i2c66 = &nvmeslot_14;
+		i2c67 = &nvmeslot_15;
+
+		/*
+		 *  i2c bus 70-77 assigned to NVMe slot 16-23
+		 */
+		i2c70 = &nvmeslot_16;
+		i2c71 = &nvmeslot_17;
+		i2c72 = &nvmeslot_18;
+		i2c73 = &nvmeslot_19;
+		i2c74 = &nvmeslot_20;
+		i2c75 = &nvmeslot_21;
+		i2c76 = &nvmeslot_22;
+		i2c77 = &nvmeslot_23;
+
+		/*
+		 *  i2c bus 80-81 assigned to NVMe M2 slot 0-1
+		 */
+		i2c80 = &nvme_m2_0;
+		i2c81 = &nvme_m2_1;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 6) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpioA0mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 8>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 9>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 10>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 11>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 12>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 13>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioA0mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		/* spi-max-frequency = <50000000>; */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		/* spi-max-frequency = <100000000>; */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			uefi@400000 {
+				reg = <0x400000 0x1C00000>;
+				label = "pnor-uefi";
+			};
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			 &pinctrl_rxd1_default
+			 &pinctrl_ncts1_default
+			 &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			 &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			 &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+			 &pinctrl_rxd4_default>;
+};
+
+/* The BMC's uart */
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+	smpro@4f {
+		compatible = "ampere,smpro";
+		reg = <0x4f>;
+	};
+	smpro@4e {
+		compatible = "ampere,smpro";
+		reg = <0x4e>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "microchip,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	inlet_mem2: tmp175@28 {
+		compatible = "ti,tmp175";
+		reg = <0x28>;
+	};
+
+	inlet_cpu: tmp175@29 {
+		compatible = "ti,tmp175";
+		reg = <0x29>;
+	};
+
+	inlet_mem1: tmp175@2a {
+		compatible = "ti,tmp175";
+		reg = <0x2a>;
+	};
+
+	outlet_cpu: tmp175@2b {
+		compatible = "ti,tmp175";
+		reg = <0x2b>;
+	};
+
+	outlet1: tmp175@2c {
+		compatible = "ti,tmp175";
+		reg = <0x2c>;
+	};
+
+	outlet2: tmp175@2d {
+		compatible = "ti,tmp175";
+		reg = <0x2d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+	};
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8_15: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		nvmeslot_16_23: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x72>;
+		i2c-mux-idle-disconnect;
+
+		nvme_m2_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		nvme_m2_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+	};
+};
+
+&nvmeslot_0_7 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+
+	};
+};
+
+&nvmeslot_8_15 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_12: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_13: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_14: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_15: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&nvmeslot_16_23 {
+	status = "okay";
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		nvmeslot_16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+		nvmeslot_17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+		nvmeslot_18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+		nvmeslot_19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+		nvmeslot_20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+		nvmeslot_21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+		nvmeslot_22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+		nvmeslot_23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	adm1278@10 {
+		compatible = "adi,adm1278";
+		reg = <0x10>;
+	};
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2_default &pinctrl_pwm3_default
+			&pinctrl_pwm4_default &pinctrl_pwm5_default
+			&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@1 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@5 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@6 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@7 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@8 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@9 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@10 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@11 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","S0_BMC_SPECIAL_BOOT","","","","",
+	/*B0-B7*/	"BMC_SELECT_EEPROM","","","",
+			"POWER_BUTTON","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","BMC_SYS_PSON_L","S0_DDR_SAVE","PGOOD",
+			"S1_DDR_SAVE","","",
+	/*G0-G7*/	"host0-ready","SHD_REQ_L","","S0_OVERTEMP_L","","",
+			"","",
+	/*H0-H7*/	"","","","","PSU1_VIN_GOOD","PSU2_VIN_GOOD","","",
+	/*I0-I7*/	"PSU1_PRESENT","PSU2_PRESENT","S1_BMC_SPECIAL_BOOT",
+			"","","","","",
+	/*J0-J7*/	"S0_HIGHTEMP_L","S0_FAULT_L","S0_SCP_AUTH_FAIL_L","",
+			"","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/       "","","","BMC_SYSRESET_L","SPI_AUTH_FAIL_L","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","UID_BUTTON","","",
+	/*R0-R7*/	"","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
+			"OCP_MAIN_PWREN","RESET_BUTTON","","",
+	/*S0-S7*/	"","","","","rtc-battery-voltage-read-enable","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"S0_BMC_PLIMIT","S1_FAULT_L","S1_FW_BOOT_OK","","",
+			"S1_SCP_AUTH_FAIL_L","S1_OVERTEMP_L","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"S1_HIGHTEMP_L","S1_BMC_PLIMIT","S0_BMC_DDR_ADDR",
+			"S1_BMC_DDR_ADR","","","","",
+	/*AC0-AC7*/	"SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
+			"BMC_OCP_PG";
+
+	i2c4-o-en-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_I2C4_O_EN";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
new file mode 100644
index 000000000000..1e0e88465254
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
@@ -0,0 +1,585 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (c) 2022, Ampere Computing LLC
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ampere Mt.Mitchell BMC";
+	compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: video {
+			size = <0x04000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	voltage_mon_reg: voltage-mon-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "ltc2497_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	gpioI5mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	adc0mux: adc0mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc1mux: adc1mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc2mux: adc2mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc3mux: adc3mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc4mux: adc4mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc5mux: adc5mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc6mux: adc6mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc7mux: adc7mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc0 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc8mux: adc8mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 0>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc9mux: adc9mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 1>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc10mux: adc10mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 2>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc11mux: adc11mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 3>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc12mux: adc12mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 4>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc13mux: adc13mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 5>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc14mux: adc14mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 6>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	adc15mux: adc15mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc1 7>;
+		#io-channel-cells = <1>;
+		io-channel-names = "parent";
+		mux-controls = <&gpioI5mux>;
+		channels = "s0", "s1";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0mux 0>, <&adc0mux 1>,
+			<&adc1mux 0>, <&adc1mux 1>,
+			<&adc2mux 0>, <&adc2mux 1>,
+			<&adc3mux 0>, <&adc3mux 1>,
+			<&adc4mux 0>, <&adc4mux 1>,
+			<&adc5mux 0>, <&adc5mux 1>,
+			<&adc6mux 0>, <&adc6mux 1>,
+			<&adc7mux 0>, <&adc7mux 1>,
+			<&adc8mux 0>, <&adc8mux 1>,
+			<&adc9mux 0>, <&adc9mux 1>,
+			<&adc10mux 0>, <&adc10mux 1>,
+			<&adc11mux 0>, <&adc11mux 1>,
+			<&adc12mux 0>, <&adc12mux 1>,
+			<&adc13mux 0>, <&adc13mux 1>,
+			<&adc14mux 0>, <&adc14mux 1>,
+			<&adc15mux 0>, <&adc15mux 1>,
+			<&adc_i2c 0>, <&adc_i2c 1>,
+			<&adc_i2c 2>, <&adc_i2c 3>,
+			<&adc_i2c 4>, <&adc_i2c 5>,
+			<&adc_i2c 6>, <&adc_i2c 7>,
+			<&adc_i2c 8>, <&adc_i2c 9>,
+			<&adc_i2c 10>, <&adc_i2c 11>,
+			<&adc_i2c 12>, <&adc_i2c 13>,
+			<&adc_i2c 14>, <&adc_i2c 15>;
+	};
+};
+
+&mdio0 {
+	status = "okay";
+
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy0>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@2e {
+		compatible = "adi,adt7490";
+		reg = <0x2e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	psu@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	adc_i2c: adc@16 {
+		compatible = "lltc,ltc2497";
+		reg = <0x16>;
+		vref-supply = <&voltage_mon_reg>;
+		#io-channel-cells = <1>;
+	 };
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9545";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c4_bus70_chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			outlet_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu1_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			pcie_zone_temp1: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			psu0_inlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+
+			pcie_zone_temp2: temperature-sensor@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			outlet_temp2: temperature-sensor@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		i2c4_bus70_chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			mb_inlet_temp1: temperature-sensor@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+			mb_inlet_temp2: temperature-sensor@4c {
+				compatible = "microchip,emc1413";
+				reg = <0x4c>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	gpio@77 {
+		compatible = "nxp,pca9539";
+		reg = <0x77>;
+		gpio-controller;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#gpio-cells = <2>;
+
+		bmc-ocp0-en-hog {
+			gpio-hog;
+			gpios = <7 GPIO_ACTIVE_LOW>;
+			output-high;
+			line-name = "bmc-ocp0-en-n";
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	bmc_ast2600_cpu: temperature-sensor@35 {
+		compatible = "ti,tmp175";
+		reg = <0x35>;
+	};
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
+	/*B0-B7*/	"","","","","host0-sysreset-n","host0-pmin-n","","",
+	/*C0-C7*/	"s0-vrd-fault-n","s1-vrd-fault-n","","",
+			"irq-n","","vrd-sel","spd-sel",
+	/*D0-D7*/	"presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
+			"","bmc-ncsi-txen","","",
+	/*E0-E7*/	"","","clk50m-bmc-ncsi","","","","","",
+	/*F0-F7*/	"s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
+			"cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
+			"s0-vr-hot-n","s1-vr-hot-n",
+	/*G0-G7*/	"","","hsc-12vmain-alt1-n","","","","","",
+	/*H0-H7*/	"","","wd-disable-n","power-chassis-good","","","","",
+	/*I0-I7*/	"","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
+			"s0-rtc-lock","","","",
+	/*N0-N7*/	"hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
+			"jtag-dbgr-prsnt-n","s1-heartbeat","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"ps0-ac-loss-n","ps1-ac-loss-n","","",
+			"led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","identify-button","led-identify",
+			"s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
+			"host0-reboot-ack-n","host0-ready","host0-shd-req-n",
+			"host0-shd-ack-n","s0-overtemp-n",
+	/*W0-W7*/	"","ocp-main-pwren","ocp-pgood","",
+			"bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
+	/*X0-X7*/	"i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
+			"s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
+			"s1-overtemp-n","s1-spi-auth-fail-n",
+	/*Y0-Y7*/	"","","","","","","","host0-special-boot",
+	/*Z0-Z7*/	"reset-button","ps0-pgood","ps1-pgood","","","","","";
+
+	ocp-aux-pwren-hog {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(W, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ocp-aux-pwren";
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B7*/	"","","","","","","s0-soc-pgood","",
+	/*18C0-18C7*/	"uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
+			"uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
new file mode 100644
index 000000000000..7c6af7f226e7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -0,0 +1,220 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HXT StarDragon 4800 REP2 AST2520";
+	compatible = "hxt,stardragon4800-rep2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+						<&adc 4>, <&adc 5>, <&adc 6>, <&adc 8>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		system_fault1 {
+			label = "System_fault1";
+			gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		system_fault2 {
+			label = "System_fault2";
+			gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+};
+
+&uart3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+	current-speed = <115200>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@1e {
+		compatible = "ti,tmp421";
+		reg = <0x1e>;
+	};
+	tmp421@2a {
+		compatible = "ti,tmp421";
+		reg = <0x2a>;
+	};
+	tmp421@1c {
+		compatible = "ti,tmp421";
+		reg = <0x1c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	nvt210@4c {
+		compatible = "nvt210";
+		reg = <0x4c>;
+	};
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9641@70 {
+		compatible = "nxp,pca9641";
+		reg = <0x70>;
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+			dps650ab@58 {
+				compatible = "dps650ab";
+				reg = <0x58>;
+			};
+		};
+	};
+
+	dps650ab@58 {
+		compatible = "delta,dps650ab";
+		reg = <0x58>;
+	};
+
+	dps650ab@59 {
+		compatible = "delta,dps650ab";
+		reg = <0x59>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_c7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BIOS_SPI_MUX_S";
+	};
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PHY2_RESET_N";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
new file mode 100644
index 000000000000..c4b2efbfdf56
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-e3c246d4i.dts
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock E3C246D4I BMC";
+	compatible = "asrock,e3c246d4i-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			/* BMC_HB_LED_N */
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			/* SYSTEM_FAULT_LED_N */
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		uid-button {
+			label = "uid-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* thermal sensor, one diode run to a disconnected header */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* FRU EEPROM */
+	eeprom@57 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "BMC_MAC1_INTB", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "", "", "", "", "", "IRQ_BMC_PCH_SMI_LPC_N", "", "",
+		/*  C */ "", "", "", "", "", "", "", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "",
+			"", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "SML0ALERT",
+		/*  H */ "FM_ME_RCVR_N", "O_PWROK", "SKL_CNL_R", "D4_DIMM_EVENT_3V_N",
+			"MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "BMC_CTS1", "BMC_DCD1", "BMC_DSR1", "BMC_RI1",
+			"BMC_DTR1", "BMC_RTS1", "BMC_TXD1", "BMC_RXD1",
+		/*  M */ "BMC_LAN0_DIS_N", "BMC_LAN1_DIS_N", "", "",
+			"", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SBM_PRESENT_1_N", "BMC_SBM_PRESENT_2_N",
+			"BMC_SBM_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "PCHHOT_BMC_N", "", "RSMRST",
+			"", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "PS_PWROK", /* dummy always-high signal */
+			"", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "",
+		/*  Z */ "CPU_CATERR_BMC_PCH_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "",
+			"", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N",
+		/* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY",
+			"", "", "", "",
+		/* AC */ "LAD0", "LAD1", "LAD2", "LAD3",
+			"CK_33M_BMC", "LFRAME", "SERIRQ", "S_PLTRST";
+
+	/* Assert BMC_READY so BIOS doesn't sit around waiting for it */
+	bmc-ready {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
new file mode 100644
index 000000000000..4554abf0c7cd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-asrock-romed8hm3.dts
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+	model = "ASRock ROMED8HM3 BMC v1.00";
+	compatible = "asrock,romed8hm3-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		system-fault {
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+	aspeed,lpc-io-reg = <0x2f8>;
+	aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* inlet temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* IPB temp sensor */
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+
+	/* IPB PMIC */
+	lm25066@40 {
+		compatible = "lm25066";
+		reg = <0x40>;
+		shunt-resistor-micro-ohms = <1000>;
+	};
+
+	/* 12VSB PMIC */
+	lm25066@41 {
+		compatible = "lm25066";
+		reg = <0x41>;
+		shunt-resistor-micro-ohms = <10000>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Baseboard FRU eeprom */
+	eeprom@50 {
+		compatible = "st,24c128", "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3_default
+		&pinctrl_pwm4_default
+		&pinctrl_pwm5_default
+		&pinctrl_pwm6_default>;
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0e>;
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "LOCATORLED_STATUS_N", "BMC_MAC2_INTB", "NMI_BTN_N", "BMC_NMI",
+			"", "", "", "",
+		/*  B */ "POST_COMPLETE_N", "", "", "", "", "", "", "",
+		/*  C */ "", "", "", "", "PCIE_HP_SEL_N", "PCIE_SATA_SEL_N", "LOCATORBTN", "",
+		/*  D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON",
+			"", "", "", "PSU_FAN_FAIL_N",
+		/*  E */ "", "", "", "", "", "", "", "",
+		/*  F */ "NIC_PWR_GOOD", "PRSNTB0", "PRSNTB1", "PRSNTB2",
+			"PRSNTB3", "", "3VSB_PCIE1_PG", "12V_PCIE1_PG",
+		/*  G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2",
+			"BMC_ALERT1_N_R", "BMC_ALERT2_N_R", "BMC_ALERT3_N", "BMC_ALERT4_N",
+		/*  H */ "X24_C1_PRSNT", "X24_C2_PRSNT", "X24_C3_PRSNT", "FM_MEM_THERM_EVENT_BMC_R_N",
+			"FACMODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "", "P0_MA_DDR_QS_CS_N",
+			"", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "MEZZ_PWRBRK_N", "OCP_HP_RST_EN",
+			"MAIN_PWR_EN_G", "BMC_MAIN_EN", "AUX_PWR_EN_G", "BMC_AUX_EN",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "", "", "", "", "", "", "", "",
+		/*  Q */ "", "", "", "",
+			"BMC_SMB_PRESENT_1_N", "BMC_SMB_PRESENT_2_N",
+			"BMC_SMB_PRESENT_3_N", "BMC_PCIE_WAKE_N",
+		/*  R */ "", "", "THERMALTRIP_CLEAR_N", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "SLP_S3", "SLP_S4_S5", "NODE_ID_1", "NODE_ID_2", "", "", "", "",
+		/*  Z */ "", "", "SYSTEM_FAULT_LED_N", "FAST_THROTTLE_N",
+			"", "", "", "",
+		/* AA */ "FM_CPU0_IBMC_THERMTRIP_N", "", "PROCHOT_L_G", "",
+			"", "", "", "",
+		/* AB */ "BMC_FORCE_SELFREFRESH", "PWRGD_OUT", "", "IRQ_BMC_PCH_SMI_LPC_N",
+			"", "", "", "",
+		/* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default
+		&pinctrl_adc10_default
+		&pinctrl_adc11_default
+		&pinctrl_adc12_default
+		&pinctrl_adc13_default
+		&pinctrl_adc14_default
+		&pinctrl_adc15_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
new file mode 100644
index 000000000000..f75cad41ae6f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dts
@@ -0,0 +1,940 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2020 Bytedance.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bytedance G220A BMC";
+	compatible = "bytedance,g220a-bmc", "aspeed,ast2500";
+
+	aliases {
+		serial4 = &uart5;
+		i2c14 = &channel_3_0;
+		i2c15 = &channel_3_1;
+		i2c16 = &channel_3_2;
+		i2c17 = &channel_3_3;
+		i2c18 = &channel_6_0;
+		i2c19 = &channel_6_1;
+		i2c20 = &channel_6_2;
+		i2c21 = &channel_6_3;
+		i2c22 = &channel_6_4;
+		i2c23 = &channel_6_5;
+		i2c24 = &channel_6_6;
+		i2c25 = &channel_6_7;
+		i2c26 = &channel_6_8;
+		i2c27 = &channel_6_9;
+		i2c28 = &channel_6_10;
+		i2c29 = &channel_6_11;
+		i2c30 = &channel_6_12;
+		i2c31 = &channel_6_13;
+		i2c32 = &channel_6_14;
+		i2c33 = &channel_6_15;
+		i2c34 = &channel_6_16;
+		i2c35 = &channel_6_17;
+		i2c36 = &channel_6_18;
+		i2c37 = &channel_6_19;
+		i2c38 = &channel_6_20;
+		i2c39 = &channel_6_21;
+		i2c40 = &channel_6_22;
+		i2c41 = &channel_6_23;
+		i2c42 = &channel_6_24;
+		i2c43 = &channel_6_25;
+		i2c44 = &channel_10_0;
+		i2c45 = &channel_10_1;
+		i2c46 = &channel_10_2;
+		i2c47 = &channel_10_3;
+		i2c48 = &channel_10_4;
+		i2c49 = &channel_10_5;
+		i2c50 = &channel_10_6;
+		i2c51 = &channel_10_7;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@bc000000 {
+			no-map;
+			reg = <0xbc000000 0x04000000>; /* 64M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		event-burn-in-signal {
+			label = "burn-in";
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-rear-riser1-presence {
+			label = "rear-riser1-presence";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-alrt-pvddq-cpu0 {
+			label = "alrt-pvddq-cpu0";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-rear-riser0-presence {
+			label = "rear-riser0-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fault-pvddq-cpu0 {
+			label = "fault-pvddq-cpu0";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-alrt-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fault-pvddq-cpu1 {
+			label = "alrt-pvddq-cpu1";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fault-pvccin-cpu1 {
+			label = "fault-pvccin-cpuq";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-bmc-rom0-wp {
+			label = "bmc-rom0-wp";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-bmc-rom1-wp {
+			label = "bmc-rom1-wp";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-front-bp1-presence {
+			label = "front-bp1-presence";
+			gpios = <&pca1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <16>;
+		};
+
+		event-rear-bp-presence {
+			label = "rear-bp-presence";
+			gpios = <&pca1 9 GPIO_ACTIVE_LOW>;
+			linux,code = <17>;
+		};
+
+		event-fault-pvccin-cpu0 {
+			label = "fault-pvccin-cpu0";
+			gpios = <&pca1 10 GPIO_ACTIVE_LOW>;
+			linux,code = <18>;
+		};
+
+		event-alrt-p1v05-pvcc {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <19>;
+		};
+
+		event-fault-p1v05-pvccio {
+			label = "alrt-p1v05-pvcc1";
+			gpios = <&pca1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <20>;
+		};
+
+		event-alrt-p1v8-pvccio {
+			label = "alrt-p1v8-pvccio";
+			gpios = <&pca1 13 GPIO_ACTIVE_LOW>;
+			linux,code = <21>;
+		};
+
+		event-fault-p1v8-pvccio {
+			label = "fault-p1v8-pvccio";
+			gpios = <&pca1 14 GPIO_ACTIVE_LOW>;
+			linux,code = <22>;
+		};
+
+		event-front-bp0-presence {
+			label = "front-bp0-presence";
+			gpios = <&pca1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <23>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,alt-boot;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"SMRST_OCP_N","MAC2_LINK","BMC_CPLD_SMB_RST_R_N","BMC_CPLD_GPIO0",
+			"","","","",
+	/*B0-B7*/	"BMC_INIT_R_OK","FM_BOARD_REV_ID2","FM_PROJECT_ID7","FAULT_P12V_STBY_N",
+			"","CPU0_PROCHOT_LVT3_N","","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"FM_PROJECT_ID0","FM_PROJECT_ID1","FM_PROJECT_ID2","FM_PROJECT_ID3",
+			"FM_PROJECT_ID4","FM_PROJECT_ID5","","",
+	/*F0-F7*/	"PSU0_PRSNT_N","PSU1_PRSNT_N","","FAULT_P12V_NVME_N",
+			"BIOS_DEBUG_MODE_R_N","DISABLE_CPU_DDR_R_SPD","COOLING_STRATEGY",
+			"PCH_GLB_RST_N",
+	/*G0-G7*/	"P12V_PMBUS_ALERT_N","CPLD_ALERT_N","BMC_RELOAD_N",
+			"P12V_PVDDQ_PMBUS_ALERT_N","BMC_JTAG_TCK_MUX_R_SEL","","NMI_OUT",
+			"NMI_BUTTON",
+	/*H0-H7*/	"BMC_CPLD_JTAG_TDI","BMC_CPLD_JTAG_TDO","BMC_CPLD_JTAG_TCK",
+			"BMC_CPLD_JTAG_TMS","FM_PROJECT_ID6","FM_BOARD_REV_ID0",
+			"PCA9546_U70_RST_N","IRQ_SML0_ALERT_N",
+	/*I0-I7*/	"FAULT_FRONT_RISER_P12V_N","FAULT_OCP_P12V_N","FM_BMC_PCH_SCI_R_N",
+			"","","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_N","FM_CPU1_SKTOCC_N","FM_CPU1_DISABLE_COD_N",
+			"","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"P12V_FAULT_N","PWRGD_P12V_PCIE_RISER","","LEAKAGE_DETECT_INPUT_N",
+			"","IRQ_SML1_PMBUS_ALERT_N","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_THERMTRIP_N","CHASSIS_INTRUSION",
+	/*R0-R7*/	"","PVCCIN_CPU1_SMBALERT_N","BMC_PREQ_R_N","FAULT_P12V_PCIE_RISER_N",
+			"ALT_P12V_PCIE_RISER_N","BURN_BOARD_N","PVCCIN_CPU0_SMBALERT_N","",
+	/*S0-S7*/	"BMC_PRDY_N","SIO_POWER_GOOD","FM_BMC_PWR_DEBUG_R_N",
+			"FM_BMC_XDP_DEBUG_EN","","STRAP_BMC_BATTERY_GPIOS5","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","PWRGD_PSU0_PWROK","CPU1_PROCHOT_LVT3_N","IRQ_BMC_PCH_SMI_LPC_N",
+			"","","","",
+	/*Z0-Z7*/	"XDP_PRSNT_N","BMC_XDP_SYS_PWROK","BMC_XDP_JTAG_SEL",
+			"PCH_BMC_SMI_ACTIVE_R_N","","","","",
+	/*AA0-AA7*/	"PWRGD_P12V_STBY_OCP","PS_PWROK","RST_PLTRST_BMC_R_N","HDA_SDO_R",
+			"FM_SLPS4_R_N","PWRGD_PSU1_PWROK","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"","RESET_OUT","SPI_BIOS_MODE_SELECT","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","CPLD_PLTRST_B_N";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_3_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_3_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_3_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	i2c-switch@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_6_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_6_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_6_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+		channel_6_4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		channel_6_5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		channel_6_6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		channel_6_7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_6_8: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_12: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_13: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_14: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_15: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_9: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_16: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+
+				};
+
+				channel_6_17: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_18: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_19: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_10: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				channel_6_22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				channel_6_23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		 };
+
+		channel_6_11: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			i2c-switch@71 {
+				compatible = "nxp,pca9546";
+				reg = <0x71>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				channel_6_24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				channel_6_25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+			 };
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	pca0:pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1:pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		channel_10_4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_10_5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_10_6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_10_7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+};
+
+&gpio {
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "NCSI_BMC_R_SEL";
+	};
+
+	pin_gpio_b6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "EN_NCSI_SWITCH_N";
+	};
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
new file mode 100644
index 000000000000..6600f7e9bf5e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-delta-ahe50dc.dts
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+#define EFUSE_OUTPUT(n)					\
+	efuse##n {					\
+		compatible = "regulator-output";	\
+		vout-supply = <&efuse##n>;		\
+	}
+
+#define __stringify(x) #x
+
+#define EFUSE(hexaddr, num)							\
+	efuse@##hexaddr {							\
+		compatible = "lm25066";						\
+		reg = <0x##hexaddr>;						\
+		shunt-resistor-micro-ohms = <675>;				\
+		regulators {							\
+			efuse##num: vout0 {					\
+				regulator-name = __stringify(efuse##num##-reg);	\
+			};							\
+		};								\
+	}
+
+/{
+	model = "Delta Power AHE-50DC";
+	compatible = "delta,ahe50dc-bmc", "aspeed,ast2400";
+
+	aliases {
+		serial4 = &uart5;
+
+		/*
+		 * pca9541-arbitrated logical i2c buses are numbered as the
+		 * corresponding physical bus plus 20
+		 */
+		i2c20 = &i2carb0;
+		i2c21 = &i2carb1;
+		i2c22 = &i2carb2;
+		i2c23 = &i2carb3;
+		i2c24 = &i2carb4;
+		i2c26 = &i2carb6;
+		i2c27 = &i2carb7;
+		i2c28 = &i2carb8;
+		i2c32 = &i2carb12;
+	};
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,115200n8 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		panic {
+			gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "panic";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+
+	EFUSE_OUTPUT(01);
+	EFUSE_OUTPUT(02);
+	EFUSE_OUTPUT(03);
+	EFUSE_OUTPUT(04);
+	EFUSE_OUTPUT(05);
+	EFUSE_OUTPUT(06);
+	EFUSE_OUTPUT(07);
+	EFUSE_OUTPUT(08);
+	EFUSE_OUTPUT(09);
+	EFUSE_OUTPUT(10);
+	EFUSE_OUTPUT(11);
+	EFUSE_OUTPUT(12);
+	EFUSE_OUTPUT(13);
+	EFUSE_OUTPUT(14);
+	EFUSE_OUTPUT(15);
+	EFUSE_OUTPUT(16);
+	EFUSE_OUTPUT(17);
+	EFUSE_OUTPUT(18);
+	EFUSE_OUTPUT(19);
+	EFUSE_OUTPUT(20);
+	EFUSE_OUTPUT(21);
+	EFUSE_OUTPUT(22);
+	EFUSE_OUTPUT(23);
+	EFUSE_OUTPUT(24);
+	EFUSE_OUTPUT(25);
+	EFUSE_OUTPUT(26);
+	EFUSE_OUTPUT(27);
+	EFUSE_OUTPUT(28);
+	EFUSE_OUTPUT(29);
+	EFUSE_OUTPUT(30);
+	EFUSE_OUTPUT(31);
+	EFUSE_OUTPUT(32);
+	EFUSE_OUTPUT(33);
+	EFUSE_OUTPUT(34);
+	EFUSE_OUTPUT(35);
+	EFUSE_OUTPUT(36);
+	EFUSE_OUTPUT(37);
+	EFUSE_OUTPUT(38);
+	EFUSE_OUTPUT(39);
+	EFUSE_OUTPUT(40);
+	EFUSE_OUTPUT(41);
+	EFUSE_OUTPUT(42);
+	EFUSE_OUTPUT(43);
+	EFUSE_OUTPUT(44);
+	EFUSE_OUTPUT(45);
+	EFUSE_OUTPUT(46);
+	EFUSE_OUTPUT(47);
+	EFUSE_OUTPUT(48);
+	EFUSE_OUTPUT(49);
+	EFUSE_OUTPUT(50);
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "flash0";
+		spi-max-frequency = <50000000>; // 50 MHz
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@79 {
+		compatible = "nxp,pca9541";
+		reg = <0x79>;
+
+		i2carb0: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57 */
+			EFUSE(10, 03);
+			EFUSE(11, 04);
+			EFUSE(12, 01);
+			EFUSE(13, 02);
+			EFUSE(14, 13);
+			EFUSE(15, 14);
+			EFUSE(16, 15);
+			EFUSE(17, 16);
+			EFUSE(40, 12);
+			EFUSE(41, 11);
+			EFUSE(42, 10);
+			EFUSE(43, 09);
+			EFUSE(44, 08);
+			EFUSE(45, 07);
+			EFUSE(46, 05);
+			EFUSE(47, 06);
+			EFUSE(50, 17);
+			EFUSE(51, 18);
+			EFUSE(52, 20);
+			EFUSE(53, 19);
+			EFUSE(54, 22);
+			EFUSE(55, 21);
+			EFUSE(56, 24);
+			EFUSE(57, 23);
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@72 {
+		compatible = "nxp,pca9541";
+		reg = <0x72>;
+
+		i2carb1: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@73 {
+		compatible = "nxp,pca9541";
+		reg = <0x73>;
+
+		i2carb2: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@74 {
+		compatible = "nxp,pca9541";
+		reg = <0x74>;
+
+		i2carb3: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7a {
+		compatible = "nxp,pca9541";
+		reg = <0x7a>;
+
+		i2carb4: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio@20 {
+				compatible = "nxp,pca9534";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			/* lm25066 efuses @ 10-17, 40-47, 50-57, 59, 5a */
+			EFUSE(10, 27);
+			EFUSE(11, 28);
+			EFUSE(12, 25);
+			EFUSE(13, 26);
+			EFUSE(14, 37);
+			EFUSE(15, 38);
+			EFUSE(16, 39);
+			EFUSE(17, 40);
+			EFUSE(40, 36);
+			EFUSE(41, 35);
+			EFUSE(42, 34);
+			EFUSE(43, 33);
+			EFUSE(44, 32);
+			EFUSE(45, 31);
+			EFUSE(46, 29);
+			EFUSE(47, 30);
+			EFUSE(50, 41);
+			EFUSE(51, 42);
+			EFUSE(52, 44);
+			EFUSE(53, 43);
+			EFUSE(54, 46);
+			EFUSE(55, 45);
+			EFUSE(56, 48);
+			EFUSE(57, 47);
+			EFUSE(59, 49);
+			EFUSE(5a, 50);
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@75 {
+		compatible = "nxp,pca9541";
+		reg = <0x75>;
+
+		i2carb6: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@76 {
+		compatible = "nxp,pca9541";
+		reg = <0x76>;
+
+		i2carb7: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@7c {
+		compatible = "nxp,pca9541";
+		reg = <0x7c>;
+
+		i2carb8: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fancontrol@30 {
+				compatible = "delta,ahe50dc-fan";
+				reg = <0x30>;
+			};
+
+			/* Baseboard FRU eeprom */
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	bus-frequency = <200000>;
+
+	pca9541@71 {
+		compatible = "nxp,pca9541";
+		reg = <0x71>;
+
+		i2carb12: i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+		/*  A */ "", "", "", "", "", "", "", "",
+		/*  B */ "", "", "", "", "", "", "", "",
+		/*  C */ "RESET_PEER_N", "HEARTBEAT_OUT", "", "", "", "", "", "",
+		/*  D */ "", "", "", "", "", "", "", "",
+		/*  E */ "DOOM_N", "", "", "", "", "LED_PWR_BLUE", "", "",
+		/*  F */ "", "", "", "", "", "", "", "",
+		/*  G */ "", "", "", "", "", "", "", "",
+		/*  H */ "", "", "", "", "", "", "", "",
+		/*  I */ "", "", "", "", "", "", "", "",
+		/*  J */ "", "", "BMC_ID", "", "", "", "", "",
+		/*  K */ "", "", "", "", "", "", "", "",
+		/*  L */ "", "", "", "", "", "", "", "",
+		/*  M */ "", "", "", "", "", "", "", "",
+		/*  N */ "", "", "", "", "", "", "", "",
+		/*  O */ "", "", "", "", "", "", "", "",
+		/*  P */ "LED_GREEN", "", "LED_RED", "", "", "", "", "",
+		/*  Q */ "", "", "", "", "", "", "", "",
+		/*  R */ "", "", "", "", "", "", "", "",
+		/*  S */ "", "", "", "", "", "", "", "",
+		/*  T */ "", "", "", "", "", "", "", "",
+		/*  U */ "", "", "", "", "", "", "", "",
+		/*  V */ "", "", "", "", "", "", "", "",
+		/*  W */ "", "", "", "", "", "", "", "",
+		/*  X */ "", "", "", "", "", "", "", "",
+		/*  Y */ "HEARTBEAT_IN", "BOARDREV0", "BOARDREV1", "",
+		/*  Z */ "", "", "", "", "", "", "", "",
+		/* AA */ "", "", "", "", "", "", "", "",
+		/* AB */ "", "", "", "";
+
+	/*
+	 * I don't rightly know what this GPIO really *is*, but setting it to
+	 * zero causes the fans to run at full speed, after which setting it
+	 * back to one causes a power output glitch, so install a hog to keep
+	 * it at one as a failsafe to ensure nothing accidentally touches it.
+	 */
+	doom-guardrail {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_LOW>;
+		output-low;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+		&pinctrl_adc1_default
+		&pinctrl_adc2_default
+		&pinctrl_adc3_default
+		&pinctrl_adc4_default
+		&pinctrl_adc5_default
+		&pinctrl_adc6_default
+		&pinctrl_adc7_default
+		&pinctrl_adc8_default
+		&pinctrl_adc9_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
new file mode 100644
index 000000000000..e899de681f47
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts
@@ -0,0 +1,1077 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Bletchley BMC";
+	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		bootargs = "console=ttyS4,57600n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi1_gpio: spi1-gpio {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+
+	switchphy: ethernet-phy@0 {
+		// Fixed link
+	};
+
+	front_gpio_leds {
+		compatible = "gpio-leds";
+		sys_log_id {
+			default-state = "off";
+			gpios = <&front_leds 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fan_gpio_leds {
+		compatible = "gpio-leds";
+		fan0_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 8 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 9 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 10 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_blue {
+			retain-state-shutdown;
+			default-state = "on";
+			gpios = <&fan_leds 11 GPIO_ACTIVE_HIGH>;
+		};
+		fan0_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 12 GPIO_ACTIVE_HIGH>;
+		};
+		fan1_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 13 GPIO_ACTIVE_HIGH>;
+		};
+		fan2_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 14 GPIO_ACTIVE_HIGH>;
+		};
+		fan3_amber {
+			retain-state-shutdown;
+			default-state = "off";
+			gpios = <&fan_leds 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	sled1_gpio_leds {
+		compatible = "gpio-leds";
+		sled1_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled1_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled2_gpio_leds {
+		compatible = "gpio-leds";
+		sled2_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled2_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled3_gpio_leds {
+		compatible = "gpio-leds";
+		sled3_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled3_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled4_gpio_leds {
+		compatible = "gpio-leds";
+		sled4_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled4_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled5_gpio_leds {
+		compatible = "gpio-leds";
+		sled5_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled5_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sled6_gpio_leds {
+		compatible = "gpio-leds";
+		sled6_amber {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 0 GPIO_ACTIVE_LOW>;
+		};
+		sled6_blue {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&sled6_leds 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		presence-sled1 {
+			label = "presence-sled1";
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 2)>;
+		};
+		presence-sled2 {
+			label = "presence-sled2";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+		presence-sled3 {
+			label = "presence-sled3";
+			gpios = <&gpio0 ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 4)>;
+		};
+		presence-sled4 {
+			label = "presence-sled4";
+			gpios = <&gpio0 ASPEED_GPIO(H, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 5)>;
+		};
+		presence-sled5 {
+			label = "presence-sled5";
+			gpios = <&gpio0 ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 6)>;
+		};
+		presence-sled6 {
+			label = "presence-sled6";
+			gpios = <&gpio0 ASPEED_GPIO(H, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 7)>;
+		};
+	};
+
+	vbus_sled1: vbus_sled1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled1";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled1_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled2: vbus_sled2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled2";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled2_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled3: vbus_sled3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled3";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled3_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled4: vbus_sled4 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled4";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled4_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled5: vbus_sled5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled5";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled5_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vbus_sled6: vbus_sled6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus_sled6";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&sled6_ioexp 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&switchphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled1_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED1_SWD_MUX", "SLED1_XRES_SWD_N",
+		"SLED1_CLKREQ_N", "SLED1_PCIE_PWR_EN";
+	};
+
+	sled1_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 0) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",
+		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",
+		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",
+		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";
+	};
+
+	sled1_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","SLED1_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled1_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 0) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled1>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled2_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED2_SWD_MUX", "SLED2_XRES_SWD_N",
+		"SLED2_CLKREQ_N", "SLED2_PCIE_PWR_EN";
+	};
+
+	sled2_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 1) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",
+		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",
+		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",
+		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";
+	};
+
+	sled2_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","SLED2_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled2_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 1) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled2>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled3_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED3_SWD_MUX", "SLED3_XRES_SWD_N",
+		"SLED3_CLKREQ_N", "SLED3_PCIE_PWR_EN";
+	};
+
+	sled3_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 2) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",
+		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",
+		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",
+		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";
+	};
+
+	sled3_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","SLED3_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled3_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(B, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled3>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled4_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED4_SWD_MUX", "SLED4_XRES_SWD_N",
+		"SLED4_CLKREQ_N", "SLED4_PCIE_PWR_EN";
+	};
+
+	sled4_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 3) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",
+		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",
+		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",
+		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";
+	};
+
+	sled4_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","SLED4_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled4_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(S, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled4>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled5_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED5_SWD_MUX", "SLED5_XRES_SWD_N",
+		"SLED5_CLKREQ_N", "SLED5_PCIE_PWR_EN";
+	};
+
+	sled5_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 4) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",
+		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",
+		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",
+		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";
+	};
+
+	sled5_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","SLED5_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled5_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(Y, 3) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled5>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	ina230@45 {
+		compatible = "ti,ina230";
+		reg = <0x45>;
+		shunt-resistor = <2000>;
+	};
+
+	mp5023@40 {
+		compatible = "mps,mp5023";
+		reg = <0x40>;
+	};
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	sled6_ioexp41: pca9536@41 {
+		compatible = "nxp,pca9536";
+		reg = <0x41>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"SLED6_SWD_MUX", "SLED6_XRES_SWD_N",
+		"SLED6_CLKREQ_N", "SLED6_PCIE_PWR_EN";
+	};
+
+	sled6_ioexp: pca9539@76 {
+		compatible = "nxp,pca9539";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(M, 5) IRQ_TYPE_LEVEL_LOW>;
+
+		gpio-line-names =
+		"SLED6_MS_DETECT1","SLED6_VBUS_BMC_EN","SLED6_INA230_ALERT","SLED6_P12V_STBY_ALERT",
+		"SLED6_SSD_ALERT","SLED6_MS_DETECT0","SLED6_RST_CCG5","SLED6_FUSB302_INT",
+		"SLED6_MD_STBY_RESET","SLED6_MD_IOEXP_EN_FAULT","SLED6_MD_DIR","SLED6_MD_DECAY",
+		"SLED6_MD_MODE1","SLED6_MD_MODE2","SLED6_MD_MODE3","power-host6";
+	};
+
+	sled6_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-sled6-amber","led-sled6-blue","SLED6_RST_IOEXP","SLED6_MD_REF_PWM",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+
+	sled6_fusb302: typec-portc@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 7) IRQ_TYPE_LEVEL_LOW>;
+		vbus-supply = <&vbus_sled6>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "source";
+			data-role = "host";
+			pd-disable;
+			typec-power-opmode = "default";
+		};
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+
+	rtc@51 {
+		/* in-chip rtc disabled, use external rtc (battery-backed) */
+		compatible = "nxp,pcf85263";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+
+	front_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"led-fault-identify","power-p5v-stby-good",
+		"power-p1v0-dvdd-good","power-p1v0-avdd-good",
+		"","","","",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	adm1278@11 {
+		compatible = "adi,adm1278";
+		reg = <0x11>;
+		shunt-resistor-micro-ohms = <300>;
+		adi,volt-curr-sample-average = <128>;
+		adi,power-sample-average = <128>;
+	};
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+
+	tmp421@4d {
+		compatible = "ti,tmp421";
+		reg = <0x4d>;
+	};
+
+	fan_leds: pca9552@67 {
+		compatible = "nxp,pca9552";
+		reg = <0x67>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"presence-fan0","presence-fan1",
+		"presence-fan2","presence-fan3",
+		"power-fan0-good","power-fan1-good",
+		"power-fan2-good","power-fan3-good",
+		"","","","",
+		"","","","";
+	};
+};
+
+&i2c13 {
+	multi-master;
+	aspeed,hw-timeout-ms = <1000>;
+	status = "okay";
+
+	//USB Debug Connector
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiov2_unbiased_default>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"FUSB302_SLED1_INT_N","FUSB302_SLED2_INT_N",
+			"SEL_SPI2_MUX","SPI2_MUX1",
+			"SPI2_MUX2","SPI2_MUX3",
+			"","FUSB302_SLED3_INT_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"BMC_SLED1_STCK","BMC_SLED2_STCK",
+			"BMC_SLED3_STCK","BMC_SLED4_STCK",
+			"BMC_SLED5_STCK","BMC_SLED6_STCK",
+			"","",
+	/*G0-G7*/	"BSM_FRU_WP","SWITCH_FRU_MUX","","FM_SOL_UART_CH_SEL",
+			"PWRGD_P1V05_VDDCORE","PWRGD_P1V5_VDD","","",
+	/*H0-H7*/	"presence-riser1","presence-riser2",
+			"presence-sled1","presence-sled2",
+			"presence-sled3","presence-sled4",
+			"presence-sled5","presence-sled6",
+	/*I0-I7*/	"REV_ID0","",
+			"REV_ID1","REV_ID2",
+			"","BSM_FLASH_WP_STATUS",
+			"BMC_TPM_PRES_N","FUSB302_SLED6_INT_N",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","BMC_RTC_INT","","",
+	/*M0-M7*/	"ALERT_SLED1_N","ALERT_SLED2_N",
+			"ALERT_SLED3_N","ALERT_SLED4_N",
+			"ALERT_SLED5_N","ALERT_SLED6_N",
+			"","USB_DEBUG_PWR_BTN_N",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"","","","",
+			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",
+	/*P0-P7*/	"","","","","","","","BMC_HEARTBEAT",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","BAT_DETECT",
+			"BMC_BT_WP0_N","BMC_BT_WP1_N","","FUSB302_SLED4_INT_N",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"PWRGD_CNS_PSU","RST_BMC_MVL_N",
+			"P12V_AUX_ALERT1_N","PSU_PRSNT",
+			"USB2_SEL0_A","USB2_SEL1_A",
+			"USB2_SEL0_B","USB2_SEL1_B",
+	/*W0-W7*/	"RST_FRONT_IOEXP_N","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"BMC_SELF_HW_RST","BSM_PRSNT_N",
+			"BSM_FLASH_LATCH_N","FUSB302_SLED5_INT_N",
+			"","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&adc0 {
+	vref = <1800>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio0 {
+	status = "okay";
+	/* TODO: Add Marvell 88E6191X */
+};
+
+&mdio3 {
+	status = "okay";
+	/* TODO: Add Marvell 88X3310 */
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl_gpiov2_unbiased_default: gpiov2 {
+		pins = "AD14";
+		bias-disable;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
new file mode 100644
index 000000000000..5cd060029ea9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cloudripper.dts
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Cloudripper BMC";
+	compatible = "facebook,cloudripper-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (1-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (3-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * PDB (Power Delivery Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (15-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <2>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <&gpio0 ASPEED_GPIO(X, 1) GPIO_ACTIVE_HIGH>;
+
+		eeprom@1 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <1>;
+		};
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+/*
+ * "mdio1" is connected to the MDC/MDIO interface of the on-board
+ * management switch (whose ports are connected to BMC, Host and front
+ * panel ethernet port).
+ */
+&mdio1 {
+	status = "okay";
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy1: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	/*
+	 * PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	/*
+	 * PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c6 {
+	lp5012@14 {
+		compatible = "ti,lp5012";
+		reg = <0x14>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		multi-led@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "sys";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "fan";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "psu";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+
+		multi-led@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			color = <LED_COLOR_ID_MULTI>;
+			function = LED_FUNCTION_ACTIVITY;
+			label = "scm";
+
+			led@0 {
+				reg = <0>;
+				color = <LED_COLOR_ID_RED>;
+			};
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_BLUE>;
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+			};
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
+	 * Delivery Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c15 {
+	/*
+	 * PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
+	 * Controller Module).
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux48: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux49: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux50: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux51: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux52: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux53: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux54: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux55: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
new file mode 100644
index 000000000000..90a3f485c67a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-cmm.dts
@@ -0,0 +1,1590 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Backpack CMM BMC";
+	compatible = "facebook,cmm-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+
+		/*
+		 * PCA9548 (1-0077) provides 8 channels for connecting to
+		 * 4 Line Cards and 4 Fabric Cards.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (2-0071) provides 8 channels for connecting to
+		 * Power Distribution Board.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (8-0077) provides 8 channels and the first 4
+		 * channels are connecting to 4 Fan Control Boards.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * 2 PCA9548 (18-0070 & 18-0073), 16 channels connecting
+		 * to Line Card #1.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * 2 PCA9548 (19-0070 & 19-0073), 16 channels connecting
+		 * to Line Card #2.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * 2 PCA9548 (20-0070 & 20-0073), 16 channels connecting
+		 * to Line Card #3.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * 2 PCA9548 (21-0070 & 21-0073), 16 channels connecting
+		 * to Line Card #4.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * 2 PCA9548 (16-0070 & 16-0073), 16 channels connecting
+		 * to Fabric Card #1.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * 2 PCA9548 (17-0070 & 17-0073), 16 channels connecting
+		 * to Fabric Card #2.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * 2 PCA9548 (22-0070 & 22-0073), 16 channels connecting
+		 * to Fabric Card #3.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+		i2c144 = &imux144;
+		i2c145 = &imux145;
+		i2c146 = &imux146;
+		i2c147 = &imux147;
+		i2c148 = &imux148;
+		i2c149 = &imux149;
+		i2c150 = &imux150;
+		i2c151 = &imux151;
+
+		/*
+		 * 2 PCA9548 (23-0070 & 23-0073), 16 channels connecting
+		 * to Fabric Card #4.
+		 */
+		i2c152 = &imux152;
+		i2c153 = &imux153;
+		i2c154 = &imux154;
+		i2c155 = &imux155;
+		i2c156 = &imux156;
+		i2c157 = &imux157;
+		i2c158 = &imux158;
+		i2c159 = &imux159;
+		i2c160 = &imux160;
+		i2c161 = &imux161;
+		i2c162 = &imux162;
+		i2c163 = &imux163;
+		i2c164 = &imux164;
+		i2c165 = &imux165;
+		i2c166 = &imux166;
+		i2c167 = &imux167;
+
+		/*
+		 * PCA9548 (32-0070), 8 channels connecting to Fan Control
+		 # Board #1.
+		 */
+		i2c168 = &imux168;
+		i2c169 = &imux169;
+		i2c170 = &imux170;
+		i2c171 = &imux171;
+		i2c172 = &imux172;
+		i2c173 = &imux173;
+		i2c174 = &imux174;
+		i2c175 = &imux175;
+
+		/*
+		 * PCA9548 (33-0070), 8 channels connecting to Fan Control
+		 # Board #2.
+		 */
+		i2c176 = &imux176;
+		i2c177 = &imux177;
+		i2c178 = &imux178;
+		i2c179 = &imux179;
+		i2c180 = &imux180;
+		i2c181 = &imux181;
+		i2c182 = &imux182;
+		i2c183 = &imux183;
+
+		/*
+		 * PCA9548 (34-0070), 8 channels connecting to Fan Control
+		 # Board #3.
+		 */
+		i2c184 = &imux184;
+		i2c185 = &imux185;
+		i2c186 = &imux186;
+		i2c187 = &imux187;
+		i2c188 = &imux188;
+		i2c189 = &imux189;
+		i2c190 = &imux190;
+		i2c191 = &imux191;
+
+		/*
+		 * PCA9548 (35-0070), 8 channels connecting to Fan Control
+		 # Board #4.
+		 */
+		i2c192 = &imux192;
+		i2c193 = &imux193;
+		i2c194 = &imux194;
+		i2c195 = &imux195;
+		i2c196 = &imux196;
+		i2c197 = &imux197;
+		i2c198 = &imux198;
+		i2c199 = &imux199;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS1,9600n8 root=/dev/ram rw earlycon";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndcd1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart3 {
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default
+		     &pinctrl_ncts3_default
+		     &pinctrl_ndcd3_default
+		     &pinctrl_nri3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c0 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Line Cards and Fabric Cards.
+ */
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fabric Card #1 */
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #2 */
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #1 */
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux40: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux41: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux42: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux43: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux44: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux45: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux46: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux47: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #2 */
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To LC3 SCM */
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Line Card #4 */
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #3 */
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux144: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux145: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux146: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux147: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux148: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux149: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux150: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux151: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fabric Card #4 */
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux152: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux153: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux154: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux155: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux156: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux157: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux158: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux159: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux160: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux161: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux162: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux163: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux164: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux165: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux166: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux167: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+/*
+ * I2C bus to Power Distribution Board.
+ */
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2c bus connected with temperature sensors on CMM.
+ */
+&i2c3 {
+	status = "okay";
+};
+
+/*
+ * I2C bus reserved for communication with COM-E.
+ */
+&i2c4 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with ADM1278.
+ */
+&i2c5 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander.
+ */
+&i2c6 {
+	status = "okay";
+};
+
+/*
+ * I2c bus connected with I/O Expander and EPROMs.
+ */
+&i2c7 {
+	status = "okay";
+};
+
+/*
+ * I2C bus to Fan Control Boards.
+ */
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		/* To Fan Control Board #1 */
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux168: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux169: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux170: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux171: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux172: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux173: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux174: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux175: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #2 */
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux176: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux177: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux178: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux179: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux180: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux181: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux182: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux183: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #3 */
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux184: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux185: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux186: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux187: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux188: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux189: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux190: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux191: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/* To Fan Control Board #4 */
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@70 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x70>;
+				i2c-mux-idle-disconnect;
+
+				imux192: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+				imux193: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+				imux194: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+				imux195: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+				imux196: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+				imux197: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+				imux198: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+				imux199: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+/*
+ * I2C bus to CMM CPLD.
+ */
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&vhub {
+	status = "disabled";
+};
+
+&sdhci0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1_default>;
+};
+
+&sdhci1 {
+	status = "disabled";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
new file mode 100644
index 000000000000..b5cd4c7800b0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-elbert.dts
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Elbert BMC";
+	compatible = "facebook,elbert-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+
+		/*
+		 * 8 child channels of PCA9548 2-0075.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * 8 child channels of PCA9548 5-0075.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&i2c2 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c5 {
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+/*
+ * BMC's "mac3" controller is connected to BCM53134P's IMP_RGMII port
+ * directly (fixed link, no PHY in between).
+ * Note: BMC's "mdio0" controller is connected to BCM53134P's MDIO
+ * interface, and the MDIO channel will be enabled in dts later, when
+ * BCM53134 is added to "bcm53xx" DSA driver.
+ */
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
new file mode 100644
index 000000000000..6b319f34a9b9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-fuji.dts
@@ -0,0 +1,1251 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC";
+	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&mac3 {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
new file mode 100644
index 000000000000..60e875ac2461
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-galaxy100.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Galaxy 100 BMC";
+	compatible = "facebook,galaxy100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>, <&adc 4>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+
+&i2c9 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
new file mode 100644
index 000000000000..7a53f54833a0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-greatlakes.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Facebook Inc.
+
+/dts-v1/;
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Greatlakes BMC";
+	compatible = "facebook,greatlakes-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+				<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+				<&adc1 0>, <&adc1 2>, <&adc1 3>, <&adc1 4>,
+				<&adc1 5>, <&adc1 6>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	no-hw-checksum;
+	use-ncsi;
+	mlx,multi-host;
+	ncsi-ctrl,start-redo-probe;
+	ncsi-ctrl,no-channel-monitor;
+	ncsi-package = <1>;
+	ncsi-channel = <1>;
+	ncsi-rexmit = <1>;
+	ncsi-timeout = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc2";
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+	mctp-controller;
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	// NIC EEPROM
+	eeprom@50 {
+		compatible = "st,24c32";
+		reg = <0x50>;
+	};
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	multi-master;
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	temperature-sensor@4f {
+		compatible = "lm75";
+		reg = <0x4f>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc0 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+			&pinctrl_adc2_default &pinctrl_adc3_default
+			&pinctrl_adc4_default &pinctrl_adc5_default
+			&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	ref_voltage = <2500>;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc10_default
+			&pinctrl_adc11_default &pinctrl_adc12_default
+			&pinctrl_adc13_default &pinctrl_adc14_default>;
+};
+
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpiu1_default &pinctrl_gpiu7_default>;
+
+	gpio-line-names =
+	/*A0-A7*/ "","","","","","","","",
+	/*B0-B7*/ "power-bmc-nic","presence-ocp-debug",
+		  "power-bmc-slot1","power-bmc-slot2",
+		  "power-bmc-slot3","power-bmc-slot4","","",
+	/*C0-C7*/ "presence-ocp-nic","","","reset-cause-nic-primary",
+		  "reset-cause-nic-secondary","","","",
+	/*D0-D7*/ "","","","","","","","",
+	/*E0-E7*/ "","","","","","","","",
+	/*F0-F7*/ "slot1-bmc-reset-button","slot2-bmc-reset-button",
+		  "slot3-bmc-reset-button","slot4-bmc-reset-button",
+		  "","","","presence-emmc",
+	/*G0-G7*/ "","","","","","","","",
+	/*H0-H7*/ "","","","",
+		  "presence-mb-slot1","presence-mb-slot2",
+		  "presence-mb-slot3","presence-mb-slot4",
+	/*I0-I7*/ "","","","","","","bb-bmc-button","",
+	/*J0-J7*/ "","","","","","","","",
+	/*K0-K7*/ "","","","","","","","",
+	/*L0-L7*/ "","","","","","","","",
+	/*M0-M7*/ "","power-nic-bmc-enable","","usb-bmc-enable","","reset-cause-usb-hub","","",
+	/*N0-N7*/ "","","","","bmc-ready","","","",
+	/*O0-O7*/ "","","","","","","fan0-bmc-cpld-enable","fan1-bmc-cpld-enable",
+	/*P0-P7*/ "fan2-bmc-cpld-enable","fan3-bmc-cpld-enable",
+		  "reset-cause-pcie-slot1","reset-cause-pcie-slot2",
+		  "reset-cause-pcie-slot3","reset-cause-pcie-slot4","","",
+	/*Q0-Q7*/ "","","","","","","","",
+	/*R0-R7*/ "","","","","","","","",
+	/*S0-S7*/ "","","power-p5v-usb","presence-bmc-tpm","","","","",
+	/*T0-T7*/ "","","","","","","","",
+	/*U0-U7*/ "","","","","","","","GND",
+	/*V0-V7*/ "bmc-slot1-ac-button","bmc-slot2-ac-button",
+		  "bmc-slot3-ac-button","bmc-slot4-ac-button",
+		  "","","","",
+	/*W0-W7*/ "","","","","","","","",
+	/*X0-X7*/ "","","","","","","","",
+	/*Y0-Y7*/ "","","","reset-cause-emmc","","","","",
+	/*Z0-Z7*/ "","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/ "","","","","","","","",
+	/*18B0-18B7*/ "","","","","","","","",
+	/*18C0-18C7*/ "","","","","","","","",
+	/*18D0-18D7*/ "","","","","","","","",
+	/*18E0-18E3*/ "","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
new file mode 100644
index 000000000000..230d16cd9967
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-minipack.dts
@@ -0,0 +1,1339 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Minipack 100 BMC";
+	compatible = "facebook,minipack-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default serial aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+
+		/*
+		 * i2c switch 2-0070, pca9548, 8 child channels assigned
+		 * with bus number 16-23.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * i2c switch 8-0070, pca9548, 8 child channels assigned
+		 * with bus number 24-31.
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * i2c switch 9-0070, pca9548, 8 child channels assigned
+		 * with bus number 32-39.
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		/*
+		 * i2c switch 11-0070, pca9548, 8 child channels assigned
+		 * with bus number 40-47.
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * I2C Switch 24-0071 (channel #0 of 8-0070): 8 channels for
+		 * connecting to left PDB (Power Distribution Board).
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * I2C Switch 25-0072 (channel #1 of 8-0070): 8 channels for
+		 * connecting to right PDB (Power Distribution Board).
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * I2C Switch 26-0076 (channel #2 of 8-0070): 8 channels for
+		 * connecting to top FCM (Fan Control Module).
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * I2C Switch 27-0076 (channel #3 of 8-0070): 8 channels for
+		 * connecting to bottom FCM (Fan Control Module).
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * I2C Switch 40-0073 (channel #0 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #1 (1-based).
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * I2C Switch 41-0073 (channel #1 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #2 (1-based).
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * I2C Switch 42-0073 (channel #2 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #3 (1-based).
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * I2C Switch 43-0073 (channel #3 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #4 (1-based).
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * I2C Switch 44-0073 (channel #4 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #5 (1-based).
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * I2C Switch 45-0073 (channel #5 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #6 (1-based).
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * I2C Switch 46-0073 (channel #6 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #7 (1-based).
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * I2C Switch 47-0073 (channel #7 of 11-0070): connecting
+		 * to PIM (Port Interface Module) #8 (1-based).
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "debug console=ttyS1,9600n8 root=/dev/ram rw";
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+/*
+ * Both firmware flashes are 64MB on Minipack BMC.
+ */
+&fmc_flash0 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * u-boot partition: 384KB.
+		 */
+		u-boot@0 {
+			reg = <0x0 0x60000>;
+			label = "u-boot";
+		};
+
+		/*
+		 * u-boot environment variables: 128KB.
+		 */
+		u-boot-env@60000 {
+			reg = <0x60000 0x20000>;
+			label = "env";
+		};
+
+		/*
+		 * FIT image: 55.5 MB.
+		 */
+		fit@80000 {
+			reg = <0x80000 0x3780000>;
+			label = "fit";
+		};
+
+		/*
+		 * "data0" partition (8MB) is reserved for persistent
+		 * data store.
+		 */
+		data0@3800000 {
+			reg = <0x3800000 0x800000>;
+			label = "data0";
+		};
+
+		/*
+		 * "flash0" partition (covering the entire flash) is
+		 * explicitly created to avoid breaking legacy applications.
+		 */
+		flash0@0 {
+			reg = <0x0 0x4000000>;
+			label = "flash0";
+		};
+	};
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x4000000>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default
+		     &pinctrl_ncts1_default
+		     &pinctrl_ndsr1_default
+		     &pinctrl_ndtr1_default
+		     &pinctrl_nrts1_default>;
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	bus-frequency = <400000>;
+	multi-master;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 2-0070 is connecting to SCM (System Controller
+	 * Module).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	multi-master;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 8-0070 channel #0: connecting to left PDB
+		 * (Power Distribution Board).
+		 */
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #1: connecting to right PDB
+		 * (Power Distribution Board).
+		 */
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #2: connecting to top FCM
+		 * (Fan Control Module).
+		 */
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 8-0070 channel #3: connecting to bottom
+		 * FCM (Fan Control Module).
+		 */
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/*
+	 * I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
+	 * (Switch Main Board).
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		/*
+		 * I2C Switch 11-0070 channel #0: connecting to PIM
+		 * (Port Interface Module) #1 (1-based).
+		 */
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #1: connecting to PIM
+		 * (Port Interface Module) #2 (1-based).
+		 */
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #2: connecting to PIM
+		 * (Port Interface Module) #3 (1-based).
+		 */
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #3: connecting to PIM
+		 * (Port Interface Module) #4 (1-based).
+		 */
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #4: connecting to PIM
+		 * (Port Interface Module) #5 (1-based).
+		 */
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #5: connecting to PIM
+		 * (Port Interface Module) #6 (1-based).
+		 */
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #6: connecting to PIM
+		 * (Port Interface Module) #7 (1-based).
+		 */
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+
+		/*
+		 * I2C Switch 11-0070 channel #7: connecting to PIM
+		 * (Port Interface Module) #8 (1-based).
+		 */
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
new file mode 100644
index 000000000000..b6b16356f571
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+// Author: Vijay Khemka <vijaykhemka@fb.com>
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook TiogaPass BMC";
+	compatible = "facebook,tiogapass-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+
+		/*
+		 * Hardcode the bus number of i2c switches' channels to
+		 * avoid breaking the legacy applications.
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			      <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&lpc_ctrl {
+	// Enable lpc clock
+	status = "okay";
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// SoL Host Console
+	status = "okay";
+};
+
+&uart3 {
+	// SoL BMC Console
+	status = "okay";
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&kcs2 {
+	// BMC KCS channel 2
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	// BMC KCS channel 3
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	use-ncsi;
+};
+
+&adc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	//Airmax Conn B, CPU0 PIROM, CPU1 PIROM
+};
+
+&i2c1 {
+	status = "okay";
+	//X24 Riser
+	i2c-switch@71 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x71>;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux20: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux21: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux22: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux23: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux24: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux25: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux26: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux27: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			ina230@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+			tmp421@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+
+			tmp421@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+			};
+
+			i2c-switch@73 {
+				compatible = "nxp,pca9546";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x73>;
+
+				imux28: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux29: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux30: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux31: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+			};
+
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-switch@40 {
+				compatible = "ti,ina230";
+				reg = <0x40>;
+			};
+
+			i2c-switch@41 {
+				compatible = "ti,ina230";
+				reg = <0x41>;
+			};
+
+			i2c-switch@45 {
+				compatible = "ti,ina230";
+				reg = <0x45>;
+			};
+
+		};
+
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Mezz Management SMBus
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to Board ID EEPROM
+};
+
+&i2c4 {
+	status = "okay";
+	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	// CPU Voltage regulators
+	regulator@48 {
+		compatible = "infineon,pxe1610";
+		reg = <0x48>;
+	};
+	regulator@4a {
+		compatible = "infineon,pxe1610";
+		reg = <0x4a>;
+	};
+	regulator@50 {
+		compatible = "infineon,pxe1610";
+		reg = <0x50>;
+	};
+	regulator@52 {
+		compatible = "infineon,pxe1610";
+		reg = <0x52>;
+	};
+	regulator@58 {
+		compatible = "infineon,pxe1610";
+		reg = <0x58>;
+	};
+	regulator@5a {
+		compatible = "infineon,pxe1610";
+		reg = <0x5a>;
+	};
+	regulator@68 {
+		compatible = "infineon,pxe1610";
+		reg = <0x68>;
+	};
+	regulator@70 {
+		compatible = "infineon,pxe1610";
+		reg = <0x70>;
+	};
+	regulator@72 {
+		compatible = "infineon,pxe1610";
+		reg = <0x72>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	//HSC, AirMax Conn A
+	adm1278@45 {
+		compatible = "adm1275";
+		reg = <0x45>;
+		shunt-resistor-micro-ohms = <250>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+	//Mezz Sensor SMBus
+};
+
+&i2c9 {
+	status = "okay";
+	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
new file mode 100644
index 000000000000..584efa528450
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 100 BMC";
+	compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x2000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&i2c7 {
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
new file mode 100644
index 000000000000..6624855d8ebd
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge40.dts
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2400-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 40 BMC";
+	compatible = "facebook,wedge40-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart3;
+		bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>;
+	};
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		     &pinctrl_pwm1_default
+		     &pinctrl_pwm6_default
+		     &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
new file mode 100644
index 000000000000..ed305948386f
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge400.dts
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC";
+	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-switch@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
new file mode 100644
index 000000000000..5e6105874217
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yamp.dts
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook YAMP 100 BMC";
+	compatible = "facebook,yamp-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x2000000>;
+			label = "flash1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 000000000000..6bf2ff85a40e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+	aliases {
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// VOLATAGE SENSOR
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+&uart1 {
+	// Host1 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// Host2 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+
+};
+
+&uart3 {
+	// Host3 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	// Host4 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&vuart {
+	// Virtual UART
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	mlx,multi-host;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c1 {
+	//Host1 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb1@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	//Host2 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb3@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	//Host3 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb5@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c7 {
+	//Host4 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb7@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	//FRU EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	tmp421@4e {
+	//INLET TEMP
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	//OUTLET TEMP
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	//HSC
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	//MEZZ_TEMP_SENSOR
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+	// Debug Card
+	multi-master;
+	ipmb13@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	//FSC
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
new file mode 100644
index 000000000000..81902cbe662c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-bonnell.dts
@@ -0,0 +1,915 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Bonnell";
+	compatible = "ibm,bonnell-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+
+		serial4 = &uart5;
+		i2c16 = &i2c11mux0chn0;
+		i2c17 = &i2c11mux0chn1;
+		i2c18 = &i2c11mux0chn2;
+		i2c19 = &i2c11mux0chn3;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			gpios = <&gpio0 ASPEED_GPIO(G, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(F, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+		/*A0-A7*/	"","","","","","","","",
+		/*B0-B7*/	"","","","","","","checkstop","",
+		/*C0-C7*/	"","","","","","","","",
+		/*D0-D7*/	"","","","","","","","",
+		/*E0-E7*/	"","","","","","","","",
+		/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","","",
+		/*G0-G7*/	"fan0","fan1","","","","","","",
+		/*H0-H7*/	"","","rear-enc-id0","rear-enc-fault0","","","","",
+		/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+		/*J0-J7*/	"","","","","","","","",
+		/*K0-K7*/	"","","","","","","","",
+		/*L0-L7*/	"","","","","","","","",
+		/*M0-M7*/	"","","","","","","","",
+		/*N0-N7*/	"","","","","","","","",
+		/*O0-O7*/	"","","","usb-power","","","","",
+		/*P0-P7*/	"","","","","","","","",
+		/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+		/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+		/*S0-S7*/	"presence-ps0","presence-ps1","","","power-ffs-sync-history","","","",
+		/*T0-T7*/	"","","","","","","","",
+		/*U0-U7*/	"","","","","","","","",
+		/*V0-V7*/	"","","","","","","","",
+		/*W0-W7*/	"","","","","","","","",
+		/*X0-X7*/	"","","","","","","","",
+		/*Y0-Y7*/	"","","","","","","","",
+		/*Z0-Z7*/	"","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"",
+			"",
+			"DASD_BP_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@5a {
+		compatible = "acbel,fsg032";
+		reg = <0x5a>;
+	};
+
+	power-supply@5b {
+		compatible = "acbel,fsg032";
+		reg = <0x5b>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"APSS_RESET_N",
+			"",
+			"N_MODE_CPU_N",
+			"",
+			"",
+			"P10_DCM_PRESENT",
+			"";
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	tca9554@20 {
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "BOOT_RCVRY_TWI",
+			"BOOT_RCVRY_UART",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"PE_SWITCH_RSTB_N";
+	};
+
+	tmp435@4c {
+		compatible = "ti,tmp435";
+		reg = <0x4c>;
+	};
+
+	pca9849@75 {
+		compatible = "nxp,pca9849";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c11mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c11mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
new file mode 100644
index 000000000000..c6f8f20914d1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -0,0 +1,3723 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Everest";
+	compatible = "ibm,everest-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+		i2c500 = &cfam4_i2c0;
+		i2c501 = &cfam4_i2c1;
+		i2c510 = &cfam4_i2c10;
+		i2c511 = &cfam4_i2c11;
+		i2c512 = &cfam4_i2c12;
+		i2c513 = &cfam4_i2c13;
+		i2c514 = &cfam4_i2c14;
+		i2c515 = &cfam4_i2c15;
+		i2c602 = &cfam5_i2c2;
+		i2c603 = &cfam5_i2c3;
+		i2c610 = &cfam5_i2c10;
+		i2c611 = &cfam5_i2c11;
+		i2c614 = &cfam5_i2c14;
+		i2c615 = &cfam5_i2c15;
+		i2c616 = &cfam5_i2c16;
+		i2c617 = &cfam5_i2c17;
+		i2c700 = &cfam6_i2c0;
+		i2c701 = &cfam6_i2c1;
+		i2c710 = &cfam6_i2c10;
+		i2c711 = &cfam6_i2c11;
+		i2c712 = &cfam6_i2c12;
+		i2c713 = &cfam6_i2c13;
+		i2c714 = &cfam6_i2c14;
+		i2c715 = &cfam6_i2c15;
+		i2c802 = &cfam7_i2c2;
+		i2c803 = &cfam7_i2c3;
+		i2c810 = &cfam7_i2c10;
+		i2c811 = &cfam7_i2c11;
+		i2c814 = &cfam7_i2c14;
+		i2c815 = &cfam7_i2c15;
+		i2c816 = &cfam7_i2c16;
+		i2c817 = &cfam7_i2c17;
+
+		i2c16 = &i2c4mux0chn0;
+		i2c17 = &i2c4mux0chn1;
+		i2c18 = &i2c4mux0chn2;
+		i2c19 = &i2c5mux0chn0;
+		i2c20 = &i2c5mux0chn1;
+		i2c21 = &i2c5mux0chn2;
+		i2c22 = &i2c5mux0chn3;
+		i2c23 = &i2c6mux0chn0;
+		i2c24 = &i2c6mux0chn1;
+		i2c25 = &i2c6mux0chn2;
+		i2c26 = &i2c6mux0chn3;
+		i2c27 = &i2c14mux0chn0;
+		i2c28 = &i2c14mux0chn1;
+		i2c29 = &i2c14mux0chn2;
+		i2c30 = &i2c14mux0chn3;
+		i2c31 = &i2c14mux1chn0;
+		i2c32 = &i2c14mux1chn1;
+		i2c33 = &i2c14mux1chn2;
+		i2c34 = &i2c14mux1chn3;
+		i2c35 = &i2c15mux0chn0;
+		i2c36 = &i2c15mux0chn1;
+		i2c37 = &i2c15mux0chn2;
+		i2c38 = &i2c15mux0chn3;
+		i2c39 = &i2c15mux1chn0;
+		i2c40 = &i2c15mux1chn1;
+		i2c41 = &i2c15mux1chn2;
+		i2c42 = &i2c15mux1chn3;
+		i2c43 = &i2c15mux2chn0;
+		i2c44 = &i2c15mux2chn1;
+		i2c45 = &i2c15mux2chn2;
+		i2c46 = &i2c15mux2chn3;
+		i2c47 = &i2c8mux0chn0;
+		i2c48 = &i2c8mux0chn1;
+
+		serial4 = &uart5;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+		spi50 = &cfam4_spi0;
+		spi51 = &cfam4_spi1;
+		spi52 = &cfam4_spi2;
+		spi53 = &cfam4_spi3;
+		spi60 = &cfam5_spi0;
+		spi61 = &cfam5_spi1;
+		spi62 = &cfam5_spi2;
+		spi63 = &cfam5_spi3;
+		spi70 = &cfam6_spi0;
+		spi71 = &cfam6_spi1;
+		spi72 = &cfam6_spi2;
+		spi73 = &cfam6_spi3;
+		spi80 = &cfam7_spi0;
+		spi81 = &cfam7_spi1;
+		spi82 = &cfam7_spi2;
+		spi83 = &cfam7_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		event_log: tcg_event_log@b3d00000 {
+			no-map;
+			reg = <0xb3d00000 0x100000>;
+		};
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>; /* 16M */
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+			linux,code = <15>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* RTC battery fault LED at the back */
+		led-rtc-battery {
+			gpios = <&gpio0 ASPEED_GPIO(H, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		/* BMC Card fault LED at the back */
+		led-bmc {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure Identify LED at the back */
+		led-rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		led-rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		led-pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+				 &pinctrl_adc10_default &pinctrl_adc11_default
+				 &pinctrl_adc12_default &pinctrl_adc13_default
+				 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","led-pcieslot-power","","","",
+	/*Q0-Q7*/	"","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
+	/*S0-S7*/	"","","","","power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","BMC_3RESTART_ATTEMPT_P","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/   "","","","","","","","";
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca1: pca9552@62 {
+		compatible = "nxp,pca9552";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-ps0",
+			"presence-ps1",
+			"presence-ps2",
+			"presence-ps3",
+			"presence-pdb",
+			"presence-tpm",
+			"", "",
+			"presence-cp0",
+			"presence-cp1",
+			"presence-cp2",
+			"presence-cp3",
+			"presence-dasd",
+			"presence-lcd-op",
+			"presence-base-op",
+			"";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@54 {
+		compatible = "atmel,24c128";
+		reg = <0x54>;
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+
+	power-supply@6d {
+		compatible = "ibm,cffps";
+		reg = <0x6d>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	pca2: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card1",
+			"presence-cable-card2",
+			"presence-cable-card3",
+			"presence-cable-card4",
+			"presence-cable-card5",
+			"expander-cable-card1",
+			"expander-cable-card2",
+			"expander-cable-card3",
+			"expander-cable-card4",
+			"expander-cable-card5";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c01: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c01-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c01-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c02: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c02-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c02-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c03: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c03-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c03-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca3: pca9552@66 {
+		compatible = "nxp,pca9552";
+		reg = <0x66>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"presence-cable-card6",
+			"presence-cable-card7",
+			"presence-cable-card8",
+			"presence-cable-card9",
+			"presence-cable-card10",
+			"presence-cable-card11",
+			"expander-cable-card6",
+			"expander-cable-card7",
+			"expander-cable-card8",
+			"expander-cable-card9",
+			"expander-cable-card10",
+			"expander-cable-card11";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca_cable_card_c04: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c04-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c04-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c05: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c05-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c05-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c06: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c06-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c06-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c07: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c07-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c07-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			};
+
+			pca_cable_card_c08: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c08-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c08-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+
+			pca_cable_card_c09: pca9551@62 {
+				compatible = "nxp,pca9551";
+				reg = <0x62>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c09-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c09-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+
+			pca_cable_card_c10: pca9551@63 {
+				compatible = "nxp,pca9551";
+				reg = <0x63>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca_cable_card_c11: pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard-c11-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard-c11-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+
+	pca_pcie_slot: pca9552@65 {
+		compatible = "nxp,pca9552";
+		reg = <0x65>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@1 {
+			label = "pcieslot-c01";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot-c02";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot-c03";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot-c04";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "pcieslot-c05";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "pcieslot-c06";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "pcieslot-c07";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "pcieslot-c08";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot-c09";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot-c10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot-c11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	pic0_dimm: pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_dimm: pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic2_dimm: pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm32";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm33";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm34";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm35";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm36";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm37";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm38";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm39";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm40";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm41";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm42";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm43";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm44";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm45";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm46";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm47";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic3_dimm: pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm48";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm49";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm50";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm51";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm52";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm53";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm54";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm55";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm56";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm57";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm58";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm59";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm60";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm61";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm62";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm63";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic0_vrm_misc: pca9552@34 {
+		compatible = "ibm,pca9552";
+		reg = <0x34>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "tpm";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu3-c61";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu0-c14";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector3";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector4";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector5";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm4";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm5";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm6";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm7";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pic1_vrm_misc: pca9552@35 {
+		compatible = "ibm,pca9552";
+		reg = <0x35>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "dasd-backplane";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "power-distribution";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "cpu1-c19";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "cpu2-c56";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "opencapi-connector0";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "opencapi-connector1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "opencapi-connector2";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "vrm0";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "vrm1";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "vrm2";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "vrm3";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "vrm8";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "vrm9";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "vrm10";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "vrm11";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c8mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c8mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x", "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+		memory-region = <&event_log>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c128";
+		reg = <0x53>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c128";
+		reg = <0x52>;
+	};
+};
+
+&i2c14 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		idle-state = <1>;
+
+		i2c14mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@51 {
+				compatible = "atmel,24c32";
+				reg = <0x51>;
+			};
+		};
+
+		i2c14mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+
+			pca_oppanel: pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "front-sys-id0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "front-check-log0";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "front-enc-fault1";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "front-sys-pwron0";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c14mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			max31785@52 {
+				compatible = "maxim,max31785a";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x52>;
+
+				fan@0 {
+					compatible = "pmbus-fan";
+					reg = <0>;
+					tach-pulses = <2>;
+				};
+
+				fan@1 {
+					compatible = "pmbus-fan";
+					reg = <1>;
+					tach-pulses = <2>;
+				};
+
+				fan@2 {
+					compatible = "pmbus-fan";
+					reg = <2>;
+					tach-pulses = <2>;
+				};
+
+				fan@3 {
+					compatible = "pmbus-fan";
+					reg = <3>;
+					tach-pulses = <2>;
+				};
+			};
+
+			pca_fan_nvme: pca9552@60 {
+				compatible = "nxp,pca9552";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "nvme0";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "nvme1";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@2 {
+					label = "nvme2";
+					reg = <2>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@3 {
+					label = "nvme3";
+					reg = <3>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@4 {
+					label = "nvme4";
+					reg = <4>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@5 {
+					label = "nvme5";
+					reg = <5>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@6 {
+					label = "nvme6";
+					reg = <6>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@7 {
+					label = "nvme7";
+					reg = <7>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@8 {
+					label = "nvme8";
+					reg = <8>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@9 {
+					label = "nvme9";
+					reg = <9>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@10 {
+					label = "fan0";
+					reg = <10>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@11 {
+					label = "fan1";
+					reg = <11>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@12 {
+					label = "fan2";
+					reg = <12>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@13 {
+					label = "fan3";
+					reg = <13>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+
+			pca0: pca9552@61 {
+				compatible = "nxp,pca9552";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x61>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				gpio-line-names =
+					"","","","",
+					"","","","",
+					"","","","",
+					"presence-fan3",
+					"presence-fan2",
+					"presence-fan1",
+					"presence-fan0";
+			};
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c14mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+
+		i2c14mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			eeprom@50 {
+				compatible = "atmel,24c32";
+				reg = <0x50>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux1chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux1chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+	};
+
+	i2c-switch@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c15mux2chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c15mux2chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c15mux2chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <210>, <228>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	/*
+	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
+	 * active high.
+	 */
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {	/* DCM0_C0 */
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 { /* DCM0_C1 */
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@2,0 { /* DCM1_C0 */
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 { /* DCM1_C1 */
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@4,0 { /* DCM2_C0 */
+		reg = <4 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <4>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam4_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam4_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam4_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam4_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam4_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam4_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam4_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam4_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam4_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ4: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub4: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@5,0 { /* DCM2_C1 */
+		reg = <5 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <5>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam5_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam5_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam5_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam5_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam5_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam5_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam5_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam5_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam5_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ5: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub5: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@6,0 { /* DCM3_C0 */
+		reg = <6 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <6>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam6_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam6_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam6_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam6_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam6_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam6_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam6_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam6_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam6_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ6: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub6: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@7,0 { /* DCM3_C1 */
+		reg = <7 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <7>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam7_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam7_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam7_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam7_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam7_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam7_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam7_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam7_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam7_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ7: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub7: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+&fsi_occ4 {
+	reg = <5>;
+};
+
+&fsi_occ5 {
+	reg = <6>;
+};
+
+&fsi_occ6 {
+	reg = <7>;
+};
+
+&fsi_occ7 {
+	reg = <8>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
new file mode 100644
index 000000000000..f5f5b18c113a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier-4u.dts"
+
+/ {
+	model = "Rainier 1S4U";
+};
+
+&max {
+	/delete-node/ fan3;
+	/delete-node/ fan5;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
new file mode 100644
index 000000000000..342546a3c0f5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2020 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-bmc-ibm-rainier.dts"
+
+/ {
+	model = "Rainier 4U";
+};
+
+&i2c3 {
+	power-supply@6a {
+		compatible = "ibm,cffps";
+		reg = <0x6a>;
+	};
+
+	power-supply@6b {
+		compatible = "ibm,cffps";
+		reg = <0x6b>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
new file mode 100644
index 000000000000..7162e65b8115
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -0,0 +1,2420 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Rainier 2U";
+	compatible = "ibm,rainier-bmc", "aspeed,ast2600";
+
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c115 = &cfam0_i2c15;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c214 = &cfam1_i2c14;
+		i2c215 = &cfam1_i2c15;
+		i2c216 = &cfam1_i2c16;
+		i2c217 = &cfam1_i2c17;
+		i2c300 = &cfam2_i2c0;
+		i2c301 = &cfam2_i2c1;
+		i2c310 = &cfam2_i2c10;
+		i2c311 = &cfam2_i2c11;
+		i2c312 = &cfam2_i2c12;
+		i2c313 = &cfam2_i2c13;
+		i2c314 = &cfam2_i2c14;
+		i2c315 = &cfam2_i2c15;
+		i2c402 = &cfam3_i2c2;
+		i2c403 = &cfam3_i2c3;
+		i2c410 = &cfam3_i2c10;
+		i2c411 = &cfam3_i2c11;
+		i2c414 = &cfam3_i2c14;
+		i2c415 = &cfam3_i2c15;
+		i2c416 = &cfam3_i2c16;
+		i2c417 = &cfam3_i2c17;
+
+		serial4 = &uart5;
+		i2c16 = &i2c2mux0;
+		i2c17 = &i2c2mux1;
+		i2c18 = &i2c2mux2;
+		i2c19 = &i2c2mux3;
+		i2c20 = &i2c4mux0chn0;
+		i2c21 = &i2c4mux0chn1;
+		i2c22 = &i2c4mux0chn2;
+		i2c23 = &i2c5mux0chn0;
+		i2c24 = &i2c5mux0chn1;
+		i2c25 = &i2c6mux0chn0;
+		i2c26 = &i2c6mux0chn1;
+		i2c27 = &i2c6mux0chn2;
+		i2c28 = &i2c6mux0chn3;
+		i2c29 = &i2c11mux0chn0;
+		i2c30 = &i2c11mux0chn1;
+
+		spi10 = &cfam0_spi0;
+		spi11 = &cfam0_spi1;
+		spi12 = &cfam0_spi2;
+		spi13 = &cfam0_spi3;
+		spi20 = &cfam1_spi0;
+		spi21 = &cfam1_spi1;
+		spi22 = &cfam1_spi2;
+		spi23 = &cfam1_spi3;
+		spi30 = &cfam2_spi0;
+		spi31 = &cfam2_spi1;
+		spi32 = &cfam2_spi2;
+		spi33 = &cfam2_spi3;
+		spi40 = &cfam3_spi0;
+		spi41 = &cfam3_spi1;
+		spi42 = &cfam3_spi2;
+		spi43 = &cfam3_spi3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xb3e00000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		/* LPC FW cycle bridge region requires natural alignment */
+		flash_memory: region@b4000000 {
+			no-map;
+			reg = <0xb4000000 0x04000000>; /* 64M */
+		};
+
+		/* VGA region is dictated by hardware strapping */
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;  /* 16M */
+		};
+	};
+
+	i2c2mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		i2c-parent = <&i2c2>;
+		mux-gpios = <&gpio0 ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>,
+			    <&gpio0 ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+
+		i2c2mux0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c2mux1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c2mux2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c2mux3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		/* BMC Card fault LED at the back */
+		bmc-ingraham0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure ID LED at the back */
+		rear-enc-id0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		/* Enclosure fault LED at the back */
+		rear-enc-fault0 {
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		/* PCIE slot power LED */
+		pcieslot-power {
+			gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca0 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca0 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 7>;
+	};
+};
+
+&adc1 {
+	status = "okay";
+	aspeed,int-vref-microvolt = <2500000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","checkstop","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","rtc-battery-voltage-read-enable","reset-cause-pinhole","","","factory-reset-toggle","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
+	/*I0-I7*/	"","","","","","","bmc-secure-boot","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","usb-power","","","","",
+	/*P0-P7*/	"","","","","pcieslot-power","","","",
+	/*Q0-Q7*/	"cfam-reset","","regulator-standby-faulted","","","","","",
+	/*R0-R7*/	"bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+	"power-ffs-sync-history","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+
+	i2c3_mux_oe_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "I2C3_MUX_OE_N";
+	};
+
+	usb_power {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&pinctrl_emmc_default {
+	bias-disable;
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <180>, <180>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	/*
+	 * CFAM Reset is supposed to be active low but pass1 hardware is wired
+	 * active high.
+	 */
+	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OMI01 */
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OMI23 */
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam0_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam0_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OMI45 */
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OMI67 */
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam1_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam1_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam1_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam1_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+                };
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@2,0 {
+		reg = <2 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <2>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_i2c0: i2c-bus@0 {
+				reg = <0>;	/* OM01 */
+			};
+
+			cfam2_i2c1: i2c-bus@1 {
+				reg = <1>;	/* OM23 */
+			};
+
+			cfam2_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam2_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam2_i2c12: i2c-bus@c {
+				reg = <12>;	/* OP4A */
+			};
+
+			cfam2_i2c13: i2c-bus@d {
+				reg = <13>;	/* OP4B */
+			};
+
+			cfam2_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam2_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam2_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam2_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ2: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub2: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+
+	cfam@3,0 {
+		reg = <3 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <3>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_i2c2: i2c-bus@2 {
+				reg = <2>;	/* OM45 */
+			};
+
+			cfam3_i2c3: i2c-bus@3 {
+				reg = <3>;	/* OM67 */
+			};
+
+			cfam3_i2c10: i2c-bus@a {
+				reg = <10>;	/* OP3A */
+			};
+
+			cfam3_i2c11: i2c-bus@b {
+				reg = <11>;	/* OP3B */
+			};
+
+			cfam3_i2c14: i2c-bus@e {
+				reg = <14>;	/* OP5A */
+			};
+
+			cfam3_i2c15: i2c-bus@f {
+				reg = <15>;	/* OP5B */
+			};
+
+			cfam3_i2c16: i2c-bus@10 {
+				reg = <16>;	/* OP6A */
+			};
+
+			cfam3_i2c17: i2c-bus@11 {
+				reg = <17>;	/* OP6B */
+			};
+		};
+
+		fsi2spi@1c00 {
+			compatible = "ibm,fsi2spi";
+			reg = <0x1c00 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam3_spi0: spi@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi1: spi@20 {
+				reg = <0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi2: spi@40 {
+				reg = <0x40>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+
+			cfam3_spi3: spi@60 {
+				reg = <0x60>;
+				compatible = "ibm,fsi2spi-restricted";
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				eeprom@0 {
+					at25,byte-len = <0x80000>;
+					at25,addr-mode = <4>;
+					at25,page-size = <256>;
+
+					compatible = "atmel,at25";
+					reg = <0>;
+					spi-max-frequency = <1000000>;
+				};
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ3: occ {
+				compatible = "ibm,p10-occ";
+
+				occ-hwmon {
+					compatible = "ibm,p10-occ-hwmon";
+					ibm,no-poll-on-init;
+				};
+			};
+		};
+
+		fsi_hub3: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+&fsi_occ2 {
+	reg = <3>;
+};
+
+&fsi_occ3 {
+	reg = <4>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	tca_pres1: tca9554@20{
+		compatible = "ti,tca9554";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "",
+			"RUSSEL_FW_I2C_ENABLE_N",
+			"RUSSEL_OPPANEL_PRESENCE_N",
+			"BLYTH_OPPANEL_PRESENCE_N",
+			"CPU_TPM_CARD_PRESENT_N",
+			"DASD_BP2_PRESENT_N",
+			"DASD_BP1_PRESENT_N",
+			"DASD_BP0_PRESENT_N";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	power-supply@68 {
+		compatible = "ibm,cffps";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps";
+		reg = <0x69>;
+	};
+
+	pca_pres1: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT0_PRSNT_EN_RSVD", "SLOT1_PRSNT_EN_RSVD",
+			"SLOT2_PRSNT_EN_RSVD", "SLOT3_PRSNT_EN_RSVD",
+			"SLOT4_PRSNT_EN_RSVD", "SLOT0_EXPANDER_PRSNT_N",
+			"SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
+			"SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
+			"", "", "", "", "", "";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c4mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard0-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard0-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c4mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+
+		i2c4mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c5mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard3-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard3-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c5mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+
+			pca9551@61 {
+				compatible = "nxp,pca9551";
+				reg = <0x61>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard4-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard4-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	tmp275@4b {
+		compatible = "ti,tmp275";
+		reg = <0x4b>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c6mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@53 {
+				compatible = "atmel,24c64";
+				reg = <0x53>;
+			};
+		};
+
+		i2c6mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@52 {
+				compatible = "atmel,24c64";
+				reg = <0x52>;
+			};
+		};
+
+		i2c6mux0chn2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6mux0chn3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c7 {
+	multi-master;
+	status = "okay";
+
+	pca9552@30 {
+		compatible = "ibm,pca9552";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "pcieslot0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "pcieslot1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "pcieslot2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "pcieslot3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "pcieslot4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "cpu1";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu-vrm1";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "lcd-russel";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@31 {
+		compatible = "ibm,pca9552";
+		reg = <0x31>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm8";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm9";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm10";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm11";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm12";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm13";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm14";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm15";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@32 {
+		compatible = "ibm,pca9552";
+		reg = <0x32>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "ddimm16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "ddimm17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "ddimm18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "ddimm19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "ddimm20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "ddimm21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "ddimm22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "ddimm23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "ddimm24";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "ddimm25";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "ddimm26";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "ddimm27";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "ddimm28";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "ddimm29";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "ddimm30";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "ddimm31";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca9552@33 {
+		compatible = "ibm,pca9552";
+		reg = <0x33>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "planar";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "cpu0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "dasd-pyramid0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "dasd-pyramid1";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "dasd-pyramid2";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "cpu0-vrm0";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "rtc-battery";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@8 {
+			label = "base-blyth";
+			reg = <8>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@9 {
+			label = "pcieslot6";
+			reg = <9>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@10 {
+			label = "pcieslot7";
+			reg = <10>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@11 {
+			label = "pcieslot8";
+			reg = <11>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@12 {
+			label = "pcieslot9";
+			reg = <12>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@13 {
+			label = "pcieslot10";
+			reg = <13>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@14 {
+			label = "pcieslot11";
+			reg = <14>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@15 {
+			label = "tpm-wilson";
+			reg = <15>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	si7021-a20@40 {
+		compatible = "silabs,si7020";
+		reg = <0x40>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	max: max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan0: fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+		};
+
+		fan1: fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+		};
+
+		fan2: fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+		};
+
+		fan3: fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+		};
+
+		fan4: fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+		};
+
+		fan5: fan@5 {
+			compatible = "pmbus-fan";
+			reg = <5>;
+			tach-pulses = <2>;
+		};
+	};
+
+	pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "front-sys-id0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "front-check-log0";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "front-enc-fault1";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "front-sys-pwron0";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	pca0: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "fan0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "fan1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "fan2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "fan3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "fan4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "fan5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	ucd90320@11 {
+		compatible = "ti,ucd90320";
+		reg = <0x11>;
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	pca_pres3: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"", "", "", "", "", "", "", "",
+			"", "", "", "", "", "", "power-config-full-load", "";
+	};
+
+	pca_pres2: pca9552@61 {
+		compatible = "nxp,pca9552";
+		reg = <0x61>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+			"SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
+			"SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
+			"SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
+			"SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
+			"SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
+			"SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
+			"", "", "", "";
+	};
+
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	tmp423b@4d {
+		compatible = "ti,tmp423";
+		reg = <0x4d>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+	pca9546@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+		i2c-mux-idle-disconnect;
+
+		i2c11mux0chn0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			pca9551@60 {
+				compatible = "nxp,pca9551";
+				reg = <0x60>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				led@0 {
+					label = "cablecard10-cxp-top";
+					reg = <0>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+
+				led@1 {
+					label = "cablecard10-cxp-bot";
+					reg = <1>;
+					retain-state-shutdown;
+					default-state = "keep";
+					type = <PCA955X_TYPE_LED>;
+				};
+			};
+		};
+
+		i2c11mux0chn1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	tpm@2e {
+		compatible = "nuvoton,npct75x";
+		reg = <0x2e>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme0";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme1";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme2";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme3";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme4";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme5";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme6";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme7";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme8";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme9";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme10";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme11";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme12";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme13";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme14";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme15";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&i2c15 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		led@0 {
+			label = "nvme16";
+			reg = <0>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@1 {
+			label = "nvme17";
+			reg = <1>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@2 {
+			label = "nvme18";
+			reg = <2>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@3 {
+			label = "nvme19";
+			reg = <3>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@4 {
+			label = "nvme20";
+			reg = <4>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@5 {
+			label = "nvme21";
+			reg = <5>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@6 {
+			label = "nvme22";
+			reg = <6>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+
+		led@7 {
+			label = "nvme23";
+			reg = <7>;
+			retain-state-shutdown;
+			default-state = "keep";
+			type = <PCA955X_TYPE_LED>;
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>,
+		 <&syscon ASPEED_CLK_MAC4RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
new file mode 100644
index 000000000000..208b0f094ed9
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts
@@ -0,0 +1,912 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "FP5280G2 BMC";
+	compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 3)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 0)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+			linux,code = <1>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca1 1 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+			linux,code = <3>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca1 4 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan5-presence {
+			label = "fan5-presence";
+			gpios = <&pca1 5 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan6-presence {
+			label = "fan6-presence";
+			gpios = <&pca1 6 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan7-presence {
+			label = "fan7-presence";
+			gpios = <&pca1 7 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "power";
+			/* TODO: dummy gpio */
+			gpios = <&gpio ASPEED_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		init-ok {
+			label = "init-ok";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(F, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-syshealth {
+			label = "front-syshealth";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(H, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(Z, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			<&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+			<&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","front-psu","checkstop","cfam-reset","","","init-ok",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"ps0-presence","ps1-presence","","","front-memory","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","front-fan","","","",
+	/*I0-I7*/	"front-syshealth","front-syshot","mux-gpios","enable-gpios","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","power","trans-gpios","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","identify",
+	/*AA0-AA7*/	"clock-gpios","","data-gpios","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* Test Point */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	/* LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "psu_inlet";
+			};
+
+		};
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "ocp_zone";
+			};
+		};
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			tmp112@4a {
+				compatible = "ti,tmp112";
+				reg = <0x4a>;
+				label = "bmc_zone";
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			tmp112@7c {
+				compatible = "microchip,emc1413";
+				reg = <0x7c>;
+			};
+		};
+
+	};
+};
+
+&i2c3 {
+	/* Riser Card */
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds3232";
+		reg = <0x68>;
+	};
+};
+
+&i2c5 {
+	/* vr  */
+	status = "okay";
+};
+
+&i2c6 {
+	/* bp card */
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+			};
+
+			adm1278@13 {
+				compatible = "adi,adm1278";
+				reg = <0x13>;
+			};
+
+			adm1278@50 {
+				compatible = "adi,adm1278";
+				reg = <0x50>;
+			};
+
+			adm1278@53 {
+				compatible = "adi,adm1278";
+				reg = <0x53>;
+			};
+
+		};
+
+		/*pcie riser*/
+
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+	};
+
+	pca1: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	/* hdd bp */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	/* odcc */
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&ibt {
+	status = "okay";
+
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
new file mode 100644
index 000000000000..b3c1e3ba5831
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-nf5280m6.dts
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2021 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "NF5280M6 BMC";
+	compatible = "inspur,nf5280m6-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+
+		bmc_alive {
+			label = "bmc_alive";
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+			led-pattern = <1000 1000>;
+		};
+
+		front-fan {
+			label = "front-fan";
+			gpios = <&gpio ASPEED_GPIO(F,2) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-psu {
+			label = "front-psu";
+			gpios = <&gpio ASPEED_GPIO(F,3) GPIO_ACTIVE_LOW>;
+		};
+
+	    front-syshot {
+			label = "front-syshot";
+			gpios = <&gpio ASPEED_GPIO(J, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		front-memory {
+			label = "front-memory";
+			gpios = <&gpio ASPEED_GPIO(S, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			label = "identify";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		<&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&gpio {
+	status = "okay";
+	/* Enable GPIOE0 and GPIOE2 pass-through by default */
+	pinctrl-names = "pass-through";
+	pinctrl-0 = <&pinctrl_gpie0_default
+			&pinctrl_gpie2_default>;
+	gpio-line-names =
+	/*A0-A7*/	"","MAC2LINK","BMC_RESET_CPLD","","BMC_SCL9","","MAC2MDC_R","",
+	/*B0-B7*/	"BMC_INIT_OK","FM_SKU_ID2","FM_SPD_DDRCPU_LVLSHFT_DIS_R_N",
+				"FM_CPU_MSMI_CATERR_LVT3_BMC_N","","FM_CPU0_PROCHOT_LVT3_N",
+				"FM_CPU_MEM_THERMTRIP_LVT3_N","BIOS_LOAD_DEFAULT_R_N",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SD2CMD","BMC_SD2DAT0","BMC_SD2DAT1","BMC_SD2DAT2",
+				"BMC_SD2DAT3","BMC_SD2DET","BMC_SD2WPT",
+	/*E0-E7*/	"FM_BOARD_ID0","FM_BOARD_ID1","FM_BOARD_ID2","FM_BOARD_ID3",
+				"FM_BOARD_ID4","FM_BOARD_ID5","","",
+	/*F0-F7*/	"PSU1_PRESENT_N","PSU2_PRESENT_N","FAN_FAULT_LED_N","PSU_FAULT_LED_N",
+				"BIOS_DEBUG_MODE_N","FP_LCD_RESET","FAN_TYPE_SEL",
+				"RST_GLB_RST_WARN_N",
+	/*G0-G7*/	"IRQ_LPTM21L_ALERT_N","IRQ_PLD_ALERT_N","AC_FAIL_N","FP_LCD_PRESENT_BMC",
+				"BMC_JTAG_TCK_MUX_SEL","BMC_BIOS_RESERVED","SYS_NMI_N","BMC_NMI_N",
+	/*H0-H7*/	"JTAG_BMC_TDI","JTAG_BMC_TDO","JTAG_BMC_TCK","JTAG_BMC_TMS","FM_BOARD_ID6",
+				"FM_SKU_ID0","IRQ_SML1_PMBUS_ALERT_N","IRQ_SML0_ALERT_MUX_N",
+	/*I0-I7*/	"FM_CPU_ERR0_LVT3_BMC_N","FM_CPU_ERR1_LVT3_BMC_N","FM_BMC_PCH_SCI_LPC_N",
+				"FM_SYS_THROTTLE_LVC3","SPI2_PCH_CS0_N","","","",
+	/*J0-J7*/	"FM_CPU0_SKTOCC_LVT3_N","FM_CPU1_SKTOCC_LVT3_N","","SYSHOT_FAULT_LED_N",
+				"VGA_HSYNC","VGA_VSYNC","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","SYS_UART_TXD1","SYS_UART_RXD1",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","FM_PCH_BMC_THERMTRIP_N","INTRUDER_N",
+	/*R0-R7*/	"SPI_BMC_BOOT_CS1_R_N","FM_CPU_MEMHOT_LVC3_N",
+				"DBP_CPU_PREQ_N","FM_CPU_ERR2_LVT3_BMC_N",
+				"RISER_NCSI_EN_N","","LOM_NCSI_EN_N","OCP_NCSI_EN_N",
+	/*S0-S7*/	"BMC_XDP_PRDY_N","SIO_POWER_GOOD","BMC_PWR_DEBUG_R_N","BMC_DEBUG_EN_R_N","",
+				"GPIOS5_BMC","","GPIOS7_BMC",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","BMC_DET_UID_N","BMC_JTAG_SEL","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"XDP_PRESENT_N","DBP_SYSPWROK","BMC_JTAG_SEL","FM_SMI_ACTIVE_N","",
+				"GPIOZ5","","",
+	/*AA0-AA7*/	"FP_BMC_SYSLED_N","PS_PWROK","RST_PLTRST_BMC_N","HDA_SDO_BMC",
+				"FM_SLPS4_R_N","","POWER_BUTTON","POWER_OUT",
+	/*AB0-AB7*/	"RESET_OUT","RESET_BUTTON","BIOS_REFLASH","POST_COMPLETE","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&i2c0 {
+	/* FP_LCD */
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		label = "fru";
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "inlet";
+	};
+
+	tmp112@49 {
+		compatible = "ti,tmp112";
+		reg = <0x49>;
+		label = "outlet";
+	};
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+
+	pca9548@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+	};
+
+	pca9548@72 {
+		compatible = "nxp,pca9548";
+		reg = <0x72>;
+	};
+};
+
+&i2c4 {
+	/* IPMB */
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	pca9548@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@33 {
+		compatible = "adi,adm1293";
+		reg = <0x33>;
+	};
+
+	adm1278@32 {
+		compatible = "adi,adm1293";
+		reg = <0x32>;
+	};
+
+	adm1278@20 {
+		compatible = "adi,adm1293";
+		reg = <0x20>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca0: pca9555@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca1: pca9555@22 {
+		compatible = "nxp,pca9555";
+		reg = <0x22>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca2: pca9555@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca3: pca9555@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c9 {
+	/* cpld */
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	pca4: pca9555@24 {
+		compatible = "nxp,pca9555";
+		reg = <0x24>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	pca5: pca9555@25 {
+		compatible = "nxp,pca9555";
+		reg = <0x25>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	power-supply@58 {
+		compatible = "inspur,ipsps1";
+		reg = <0x58>;
+	};
+
+	power-supply@59 {
+		compatible = "inspur,ipsps1";
+		reg = <0x59>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default &pinctrl_pwm5_default
+		&pinctrl_pwm6_default &pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
+	};
+
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
+	};
+
+	fan@7 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
+	};
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&kcs4 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca4>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+	 &pinctrl_adc2_default &pinctrl_adc3_default &pinctrl_adc4_default
+	 &pinctrl_adc5_default &pinctrl_adc6_default &pinctrl_adc7_default
+	 &pinctrl_adc8_default &pinctrl_adc9_default &pinctrl_adc10_default
+	 &pinctrl_adc11_default &pinctrl_adc12_default &pinctrl_adc13_default
+	 &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&vuart {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
new file mode 100644
index 000000000000..5a98a19f445e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inspur-on5263m5.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Inspur Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "ON5263M5 BMC";
+	compatible = "inspur,on5263m5-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>;
+		};
+	};
+
+	leds {
+	    compatible = "gpio-leds";
+	    bmc_alive {
+		label = "bmc_alive";
+		gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "timer";
+	    };
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+
+	tmp112@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+		pagesize = <32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	adm1278@11 {
+		  compatible = "adi,adm1278";
+		  reg = <0x11>;
+	};
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
+	};
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
new file mode 100644
index 000000000000..d5b7d28cda88
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Intel Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "S2600WF BMC";
+	compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts
new file mode 100644
index 000000000000..caf66651e5b5
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2021 Inventec Corp.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include "aspeed-g6-pinctrl.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+       model = "TRANSFORMERS BMC";
+       compatible = "inventec,transformer-bmc", "aspeed,ast2600";
+
+       aliases {
+               serial4 = &uart5;
+       };
+
+       chosen {
+               stdout-path = &uart5;
+               bootargs = "console=ttyS4,115200n8";
+       };
+
+       memory@80000000 {
+               device_type = "memory";
+               reg = <0x80000000 0x80000000>;
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               // UID led
+               uid {
+                       label = "UID_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+               };
+
+               // Heart beat led
+               heartbeat {
+                       label = "HB_LED";
+                       gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&mdio0 {
+       status = "okay";
+
+       ethphy0: ethernet-phy@0 {
+               compatible = "ethernet-phy-ieee802.3-c22";
+               reg = <1>;
+       };
+};
+
+&mac3 {
+       status = "okay";
+       phy-mode = "rgmii";
+       phy-handle = <&ethphy0>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_rgmii4_default>;
+};
+
+&fmc {
+       status = "okay";
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+#include "openbmc-flash-layout.dtsi"
+       };
+
+       flash@1 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bmc2";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+       };
+};
+
+&spi1 {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_spi1_default>;
+
+       flash@0 {
+               status = "okay";
+               m25p,fast-read;
+               label = "bios";
+               spi-max-frequency = <33000000>;
+               spi-tx-bus-width = <1>;
+               spi-rx-bus-width = <1>;
+       };
+};
+
+&wdt1 {
+       status = "okay";
+};
+
+&uart1 {
+       status = "okay";
+};
+
+&uart5 {
+       status = "okay";
+};
+
+&i2c0 {
+       status = "okay";
+
+       //Set bmc' slave address;
+       bmc_slave@10 {
+               compatible = "ipmb-dev";
+               reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+               i2c-protocol;
+       };
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c3 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+       eeprom@50 {
+               compatible = "atmel,24c512";
+               reg = <0x50>;
+               pagesize = <128>;
+       };
+};
+
+&i2c5 {
+       status = "okay";
+};
+
+&i2c6 {
+       status = "okay";
+
+       tmp75@49 {
+               compatible = "ti,tmp75";
+               reg = <0x49>;
+       };
+
+       tmp75@4f {
+               compatible = "ti,tmp75";
+               reg = <0x4f>;
+       };
+
+       tmp468@48 {
+               compatible = "ti,tmp468";
+               reg = <0x48>;
+       };
+};
+
+&i2c7 {
+       status = "okay";
+       adm1278@40 {
+               compatible = "adi,adm1278";
+               reg = <0x40>;
+       };
+};
+
+
+&i2c8 {
+       // FRU AT24C512C-SSHM-T
+       status = "okay";
+
+       eeprom@51 {
+               compatible = "atmel,24c512";
+               reg = <0x51>;
+               pagesize = <128>;
+       };
+
+       eeprom@53 {
+               compatible = "atmel,24c512";
+               reg = <0x53>;
+               pagesize = <128>;
+       };
+};
+
+&i2c9 {
+       // M.2
+       status = "okay";
+};
+
+&i2c10 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-switch@71 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x71>;
+       };
+
+       i2c-switch@73 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x73>;
+       };
+};
+
+&i2c11 {
+       // I2C EXPANDER
+       status = "okay";
+
+       i2c-switch@70 {
+               compatible = "nxp,pca9544";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               reg = <0x70>;
+
+               pcie_eeprom_riser1: i2c@0 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <0>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser2: i2c@1 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <1>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+
+               pcie_eeprom_riser3: i2c@2 {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       reg = <2>;
+
+                       eeprom@55 {
+                               compatible = "atmel,24c512";
+                               reg = <0x55>;
+                               pagesize = <128>;
+                       };
+               };
+       };
+};
+
+&i2c12 {
+       status = "okay";
+
+       psu0:psu0@58 {
+               compatible = "pmbus";
+               reg = <0x58>;
+       };
+};
+
+&gpio0 {
+       status = "okay";
+       gpio-line-names =
+       /*A0-A7*/   "","","","","","","","",
+       /*B0-B7*/   "presence-ps0","power-chassis-good","","","","","presence-ps1","",
+       /*C0-C7*/   "","","","","","","","",
+       /*D0-D7*/   "","","","","","","","",
+       /*E0-E7*/   "","","","","","","","",
+       /*F0-F7*/   "","","","","power-chassis-control","","","",
+       /*G0-G7*/   "","","jtag-mux","","","","","",
+       /*H0-H7*/   "","","","","reset-button","power-button","","",
+       /*I0-I7*/   "","","","","","","","",
+       /*J0-J7*/   "","","","","","","","",
+       /*K0-K7*/   "","","","","","","","",
+       /*L0-L7*/   "","","","","","","","",
+       /*M0-M7*/   "","","","","","","","",
+       /*N0-N7*/   "","","","","","","","",
+       /*O0-O7*/   "","","","","","","","",
+       /*P0-P7*/   "","","","tck-mux","","","","",
+       /*Q0-Q7*/   "","","","","","","","",
+       /*R0-R7*/   "","","","","","","","",
+       /*S0-S7*/   "","","","","","","","",
+       /*T0-T7*/   "","","","","","","","",
+       /*U0-U7*/   "","nmi-button","","","","","","",
+       /*V0-V7*/   "","","","","power-config-full-load","","","",
+       /*W0-W7*/   "","","","","","","","",
+       /*X0-X7*/   "","","","","","","","",
+       /*Y0-Y7*/   "","","","","","","","",
+       /*Z0-Z7*/   "","","","","","","","",
+       /*AA0-AA7*/ "","","","","","","","",
+       /*AB0-AB7*/ "","","","","","","","",
+       /*AC0-AC7*/ "","","","","","","","";
+};
+
+&lpc_snoop {
+       status = "okay";
+       snoop-ports = <0x80>;
+};
+
+&emmc_controller {
+       status = "okay";
+};
+
+&emmc {
+       status = "okay";
+       non-removable;
+       max-frequency = <52000000>;
+       bus-width = <8>;
+};
+
+&vhub {
+       status = "okay";
+       aspeed,vhub-downstream-ports = <7>;
+       aspeed,vhub-generic-endpoints = <21>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usb2ad_default>;
+};
+
+&rtc {
+       status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
new file mode 100644
index 000000000000..8f543cca7c21
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr630.dts
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr630 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR630 BMC";
+	compatible = "lenovo,hr630-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_rbp;
+		i2c15 = &i2c_fbp1;
+		i2c16 = &i2c_fbp2;
+		i2c17 = &i2c_fbp3;
+		i2c18 = &i2c_riser2;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_riser1;
+		i2c21 = &i2c_ocp;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,
+		<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+			&pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default>;
+};
+
+&i2c0 {
+	status = "okay";
+	/* temp1 inlet */
+	tmp75@4e {
+		compatible = "national,lm75";
+		reg = <0x4e>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	/* temp2 outlet */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;	/* may use mux@70 next. */
+
+		i2c_rbp: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_fbp1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_fbp2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_fbp3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	/*	Slot 0,
+	 *	Slot 1,
+	 *	Slot 2,
+	 *	Slot 3
+	 */
+	i2c-switch@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@76 next. */
+
+		i2c_riser2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser1: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_ocp: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "atmel,24c256";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS0_RST_OUT_N";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT0_FAULT_LED";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_SKT1_FAULT_LED";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FAN_PWR_CTL_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_PCIE_I2CMUX_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU1_FFS_N_R";
+	};
+
+	pin_gpio_h3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PSU2_FFS_N_R";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_INTRUDED_COVER";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_BIOS_UPDATE_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_BMC_HDD_I2CMUX_N";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_VGA_SW";
+	};
+
+	pin_gpio_s4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 4) GPIO_ACTIVE_HIGH>;
+		output;
+		line-name = "VBAT_EN_N";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PU_BMC_GPIOS6";
+	};
+
+	pin_gpio_y0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S0";
+	};
+
+	pin_gpio_y1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Y, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_NCSI_MUX_CTL_S1";
+	};
+
+	pin_gpio_z0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_INT_N";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_RISER2_RESET_N";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_z7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_POST_CMPLT_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "HOST_BMC_USB_SEL";
+	};
+
+	pin_gpio_aa5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "I2C_BUS1_RST_OUT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
new file mode 100644
index 000000000000..bcc1820f5c07
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-lenovo-hr855xg2.dts
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for Lenovo Hr855xg2 platform
+ *
+ * Copyright (C) 2019-present Lenovo
+ */
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "HR855XG2 BMC";
+	compatible = "lenovo,hr855xg2-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c14 = &i2c_riser1;
+		i2c15 = &i2c_riser2;
+		i2c16 = &i2c_riser3;
+		i2c17 = &i2c_M2;
+		i2c18 = &channel_0;
+		i2c19 = &channel_1;
+		i2c20 = &channel_2;
+		i2c21 = &channel_3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x00100000>; /* 1M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(C, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(G, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+		<&adc 8>, <&adc 9>, <&adc 10>,<&adc 11>,
+		<&adc 12>,<&adc 13>,<&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default
+			&pinctrl_nrts2_default
+			&pinctrl_ndtr2_default
+			&pinctrl_ndsr2_default
+			&pinctrl_ncts2_default
+			&pinctrl_ndcd2_default
+			&pinctrl_nri2_default>;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&adc{
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9545";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_riser1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_riser2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_riser3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_M2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	bus-frequency = <90000>;
+	HotSwap@10 {
+		compatible = "adm1272";
+		reg = <0x10>;
+	};
+
+	VR@45 {
+		compatible = "pmbus";
+		reg = <0x45>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel_0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		channel_1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		channel_2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		channel_3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	/* temp1 */
+	tmp75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	/* temp2 */
+	tmp75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+
+	eeprom@54 {
+		compatible = "atmel,24c256";
+		reg = <0x54>;
+		pagesize = <16>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+	&pinctrl_pwm1_default
+	&pinctrl_pwm2_default
+	&pinctrl_pwm3_default
+	&pinctrl_pwm4_default
+	&pinctrl_pwm5_default
+	&pinctrl_pwm6_default
+	&pinctrl_pwm7_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@10 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@11 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@12 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@13 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@14 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+
+	fan@15 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+
+	fan@16 {
+		reg = <0x07>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0f>;
+	};
+};
+
+&gpio {
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_EMMC_RST_N";
+	};
+
+	pin_gpio_a3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 3) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "PCH_PWROK_BMC_FPGA";
+	};
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_SMI_LPC_N";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "CPU_SM_WP";
+	};
+
+	pin_gpio_e0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PDB_PSU_SEL";
+	};
+
+	pin_gpio_e2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LOCATOR_LED_N";
+	};
+
+	pin_gpio_e5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R1_N";
+	};
+
+	pin_gpio_e6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_ME_SECURITY_OVERRIDE_N";
+	};
+
+	pin_gpio_f0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "IRQ_BMC_PCH_NMI_R";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU2_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_f2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RM_THROTTLE_EN_N";
+	};
+
+	pin_gpio_f3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FM_PMBUS_ALERT_B_EN";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FORCE_NM_THROTTLE_N";
+	};
+
+	pin_gpio_f6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_CPU_PWR_DEBUG_N";
+	};
+
+	pin_gpio_g7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_PCIE_I2C_MUX_RST_N";
+	};
+
+	pin_gpio_h6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_DBP_PRESENT_R2_N";
+	};
+
+	pin_gpio_i3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_WP_N";
+	};
+
+	pin_gpio_j1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_USB_SEL";
+	};
+
+	pin_gpio_j2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_SMB_RST_N";
+	};
+
+	pin_gpio_j3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(J, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPI_BMC_BIOS_HOLD_N";
+	};
+
+	pin_gpio_l0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PDB_FAN_TACH_SEL";
+	};
+
+	pin_gpio_l1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_RESET_BMC_FPGA_N";
+	};
+
+	pin_gpio_l4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G1_EN";
+	};
+
+	pin_gpio_l5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(L, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_EFUSE_FAN_G2_EN";
+	};
+
+	pin_gpio_r6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU3_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_r7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "CPU4_PROCDIS_BMC_N";
+	};
+
+	pin_gpio_s1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 1) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "DBP_SYSPWROK_BMC";
+	};
+
+	pin_gpio_s2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "PCH_RST_RSMRST_N";
+	};
+
+	pin_gpio_s6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HW_STRAP_5";
+	};
+
+	pin_gpio_z3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "FM_BMC_PCH_SCI_LPC_N";
+	};
+
+	pin_gpio_aa0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "FW_PSU_ALERT_EN_N";
+	};
+
+	pin_gpio_aa4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "DBP_CPU_PREQ_N";
+	};
+
+	pin_gpio_ab3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "BMC_WDTRST";
+	};
+
+	pin_gpio_ac6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AC, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "ESPI_BMC_ALERT_N";
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
new file mode 100644
index 000000000000..3ef8358ff764
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-microsoft-olympus.dts
@@ -0,0 +1,207 @@
+//SPDX-License-Identifier: GPL-2.0+
+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Olympus BMC";
+	compatible = "microsoft,olympus-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		bmc_heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(U, 2) GPIO_ACTIVE_HIGH>;
+		};
+
+		power_amber {
+			gpios = <&gpio ASPEED_GPIO(U, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(A, 1) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+		<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>;
+	};
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	tmp421@4c {
+		compatible = "ti,tmp421";
+		reg = <0x4c>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 =    <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm2_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default
+			&pinctrl_pwm5_default
+			&pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
new file mode 100644
index 000000000000..c0847636f20b
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts
@@ -0,0 +1,329 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Inventec Corporation
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Lanyang BMC";
+	compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System_boot_status";
+			gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention_locator";
+			gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		plt_fault {
+			label = "Platform_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		};
+
+		hdd_fault {
+			label = "Onboard_drive_fault";
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
+		};
+		bmc_err {
+			lable = "BMC_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+		};
+
+		sys_err {
+			lable = "Sys_fault";
+			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@55 {
+		compatible = "atmel,24c64";
+		reg = <0x55>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	tmp75@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&gpio {
+	pin_gpio_b0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_HDD1_PWR_EN";
+	};
+
+	pin_gpio_b5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_USB1_OCI2";
+	};
+
+	pin_gpio_h5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_PERST_ENABLE_R";
+	};
+
+	pin_gpio_z2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "RST_PCA9546_U177_N";
+	};
+
+	pin_gpio_aa6 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_CP0_RESET_N";
+	};
+
+	pin_gpio_aa7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_RESET_N";
+	};
+
+	pin_gpio_ab0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "BMC_USB_PWRON_N";
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
new file mode 100644
index 000000000000..31ff19ef87a0
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mowgli.dts
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Mowgli BMC";
+	compatible = "ibm,mowgli-bmc", "aspeed,ast2500";
+
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 2)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Z, 0)>;
+		};
+
+		button-id {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 1)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca9552 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca9552 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca9552 11 GPIO_ACTIVE_LOW>;
+			linux,code = <11>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-fan4-presence {
+			label = "fan4-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fan4 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca9552 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-12v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>;
+	};
+
+	iio-hwmon-5v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 1>;
+	};
+
+	iio-hwmon-3v {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 2>;
+	};
+
+	iio-hwmon-vdd {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 3>;
+	};
+
+	iio-hwmon-vcs {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 5>;
+	};
+
+	iio-hwmon-vdn {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 7>;
+	};
+
+	iio-hwmon-vio {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 9>;
+	};
+
+	iio-hwmon-vddra {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	iio-hwmon-vddrb {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 13>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default
+		&pinctrl_pwm4_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+
+	fan@8 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@9 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* CPU MFG CONN */
+
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* APSS */
+	/* CPLD */
+
+	/* PCA9516 (repeater) ->
+	 *    CLK Buffer 9FGS9092
+	 *    Power Supply 0
+	 *    Power Supply 1
+	 *    PCA 9552 LED
+	 */
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* CP0 VDD & VCS : IR35221 */
+	/* CP0 VDN & VIO : IR35221 */
+	/* CP0 VDDR : IR35221 */
+
+	ir35221@28 {
+		compatible = "infineon,ir35221";
+		reg = <0x28>;
+	};
+
+	ir35221@29 {
+		compatible = "infineon,ir35221";
+		reg = <0x29>;
+	};
+
+	ir35221@2d {
+		compatible = "infineon,ir35221";
+		reg = <0x2d>;
+	};
+
+};
+
+&i2c5 {
+	status = "disabled";
+};
+
+&i2c6 {
+	status = "disabled";
+};
+
+&i2c7 {
+	status = "disabled";
+};
+
+&i2c8 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	/* PCIe G3 x16 slot */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "okay";
+
+	/* CPLD */
+	/* TPM */
+	/* RTC RX8900CE */
+	/* TMP275A */
+	/* TMP275A */
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@49 {
+		compatible = "ti,tmp275";
+		reg = <0x49>;
+	};
+
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 000000000000..ac0d666ca10e
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Nicole BMC";
+	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "platform:green:power";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			label = "platform:blue:indicator";
+			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		fault {
+			label = "platform:red:fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		attention {
+			label = "platform:yellow:alarm";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* CPU0 characterization connector */
+};
+
+&i2c3 {
+	status = "okay";
+	/* CLK GEN SI5338 */
+};
+
+&i2c4 {
+	status = "okay";
+	/* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+	status = "okay";
+	/* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	/* CPLD */
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
+			"func_mode0","func_mode1","func_mode2","","",
+	/*E0-E7*/	"","ncsi_cfg","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","power-button","","","","","",
+	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","software_pwrgood","","","","","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
+			"led-power","","","led-identify",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq_cont {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	ncsi_cfg {
+		gpio-hog;
+		input;
+		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
new file mode 100644
index 000000000000..45631b47a7b3
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-palmetto.dts
@@ -0,0 +1,373 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Palmetto BMC";
+	compatible = "tyan,palmetto-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16M */
+		};
+
+		coldfire_memory: codefire_memory@5ee00000 {
+			reg = <0x5ee00000 0x00200000>;
+			no-map;
+		};
+
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5C000000 0x02000000>; /* 32MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(A, 4) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(A, 5) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 5)>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flbusy_default &pinctrl_flwp_default
+
+			&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	tmp423@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&gpio {
+	pin_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode0";
+	};
+
+	pin_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 5)  GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode1";
+	};
+
+	pin_func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		output-low;
+		line-name = "func_mode2";
+	};
+
+	pin_gpio_a0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_FAN_RESERVED_N";
+	};
+
+	pin_gpio_a1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_WDT_N";
+	};
+
+	pin_gpio_b1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_BOOT_MODE";
+	};
+
+	pin_gpio_b2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "APSS_RESET_N";
+	};
+
+	pin_gpio_b7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SPIVID_STBY_RESET_N";
+	};
+
+	pin_gpio_d1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_POWER_UP";
+	};
+
+	pin_gpio_f1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_BATTERY_TEST";
+	};
+
+	pin_gpio_f4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_HW_FAULT_N";
+	};
+
+	pin_gpio_f5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "AST_SYS_FAULT_N";
+	};
+
+	pin_gpio_f7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(F, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FULL_SPEED_N";
+	};
+
+	pin_gpio_g3 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_FAN_ERROR_N";
+	};
+
+	pin_gpio_g4 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 4) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST1_P";
+	};
+
+	pin_gpio_g5 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(G, 5) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_WDT_RST2_P";
+	};
+
+	pin_gpio_h0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "PE_SLOT_TEST_EN_N";
+	};
+
+	pin_gpio_h1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		input;
+		line-name = "BMC_RTCRST_N";
+	};
+
+	pin_gpio_h2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SYS_PWROK_BMC";
+	};
+
+	pin_gpio_h7 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "BMC_TPM_INT_N";
+	};
+};
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "ibm,fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+			no-scan-on-init;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
new file mode 100644
index 000000000000..893e621ecab1
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -0,0 +1,354 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Romulus BMC";
+	compatible = "ibm,romulus-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		id-button {
+			label = "id-button";
+			gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(Q, 7)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	/* PCIe slot 1 (x8) */
+	status = "okay";
+};
+
+&i2c7 {
+	/* PCIe slot 2 (x16) */
+	status = "okay";
+};
+
+&i2c8 {
+	/* PCIe slot 3 (x16) */
+	status = "okay";
+};
+
+&i2c9 {
+	/* PCIe slot 4 (x16) */
+	status = "okay";
+};
+
+&i2c10 {
+	/* PCIe slot 5 (x8) */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	w83773g@4c {
+		compatible = "nuvoton,w83773g";
+		reg = <0x4c>;
+	};
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","led-fault","",
+				"led-identify","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	nic_func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	nic_func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq_cont {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x08>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x09>;
+	};
+
+	fan@2 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
+	};
+
+	fan@3 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
+	};
+
+	fan@5 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
+	};
+
+	fan@6 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
new file mode 100644
index 000000000000..bbf864f84d37
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-swift.dts
@@ -0,0 +1,978 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Swift BMC";
+	compatible = "ibm,swift-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(R, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(R, 7)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+
+		event-oppanel-presence {
+			label = "oppanel-presence";
+			gpios = <&gpio ASPEED_GPIO(A, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(A, 7)>;
+		};
+
+		event-opencapi-riser-presence {
+			label = "opencapi-riser-presence";
+			gpios = <&gpio ASPEED_GPIO(I, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(I, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-scm0-presence {
+			label = "scm0-presence";
+			gpios = <&pca9552 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-scm1-presence {
+			label = "scm1-presence";
+			gpios = <&pca9552 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-cpu0vrm-presence {
+			label = "cpu0vrm-presence";
+			gpios = <&pca9552 12 GPIO_ACTIVE_LOW>;
+			linux,code = <12>;
+		};
+
+		event-cpu1vrm-presence {
+			label = "cpu1vrm-presence";
+			gpios = <&pca9552 13 GPIO_ACTIVE_LOW>;
+			linux,code = <13>;
+		};
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 8 GPIO_ACTIVE_LOW>;
+			linux,code = <8>;
+		};
+
+		event-fanboost-presence {
+			label = "fanboost-presence";
+			gpios = <&pca0 9 GPIO_ACTIVE_LOW>;
+			linux,code = <9>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		fanboost {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca1 0 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 4) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x7F80000>;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@4 {
+			compatible = "pmbus-fan";
+			reg = <4>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps2";
+		reg = <0x68>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps2";
+		reg = <0x69>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	si7021a20@20 {
+		compatible = "si,si7021a20";
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	pca1: pca9551@60 {
+		compatible = "nxp,pca9551";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"P9_SCM0_PRES",	"P9_SCM1_PRES",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"PRESENT_VRM_CP0_N", "PRESENT_VRM_CP1_N",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca2: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c10 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+
+	ir35221@72 {
+		compatible = "infineon,ir35221";
+		reg = <0x72>;
+	};
+
+	pca3: pca9539@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+		};
+	};
+};
+
+&i2c11 {
+	/* MUX
+	 *   -> PCIe Slot 0
+	 *   -> PCIe Slot 1
+	 *   -> PCIe Slot 2
+	 *   -> PCIe Slot 3
+	 */
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+
+	tmp275@48 {
+		compatible = "ti,tmp275";
+		reg = <0x48>;
+	};
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&sdmmc {
+       status = "okay";
+};
+
+&sdhci1 {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_sd2_default>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
new file mode 100644
index 000000000000..3f6010ef2b86
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -0,0 +1,887 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Tacoma";
+	compatible = "ibm,tacoma-bmc", "aspeed,ast2600";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@b8000000 {
+			no-map;
+			reg = <0xb8000000 0x4000000>; /* 64M */
+		};
+
+		ramoops@bc000000 {
+			compatible = "ramoops";
+			reg = <0xbc000000 0x180000>; /* 16 * (3 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>; /* KMSG_DUMP_EMERG */
+		};
+
+		vga_memory: region@bf000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0xbf000000 0x01000000>;	/* 16M */
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"fsi-mux","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","presence-ps0","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","usb-power","","","","",
+	/*P0-P7*/	"","","","","","bmc-tpm-reset","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+	clk-phase-mmc-hs200 = <36>, <270>;
+};
+
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+
+};
+
+&i2c0 {
+	multi-master;
+	status = "okay";
+
+	ibm-panel@62 {
+		compatible = "ibm,op-panel";
+		reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tpm: tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fan@0 {
+			compatible = "pmbus-fan";
+			reg = <0>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@1 {
+			compatible = "pmbus-fan";
+			reg = <1>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@2 {
+			compatible = "pmbus-fan";
+			reg = <2>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+
+		fan@3 {
+			compatible = "pmbus-fan";
+			reg = <3>;
+			tach-pulses = <2>;
+			maxim,fan-rotor-input = "tach";
+			maxim,fan-pwm-freq = <25000>;
+			maxim,fan-dual-tach;
+			maxim,fan-no-watchdog;
+			maxim,fan-no-fault-ramp;
+			maxim,fan-ramp = <2>;
+			maxim,fan-fault-pin-mon;
+		};
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&uart5 {
+	// Workaround for A0
+	compatible = "snps,dw-apb-uart";
+};
+
+&vuart1 {
+	status = "okay";
+};
+
+&vuart2 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&pinctrl {
+	/* Hog these as no driver is probed for the entire LPC block */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpc_default>,
+		    <&pinctrl_lsirq_default>;
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8 0xcac>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
new file mode 100644
index 000000000000..8a7fb55ab489
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-vesnin.dts
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Vesnin BMC";
+	compatible = "yadro,vesnin-bmc", "aspeed,ast2400";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@5f000000 {
+			no-map;
+			reg = <0x5f000000 0x01000000>; /* 16MB */
+		};
+		flash_memory: region@5c000000 {
+			no-map;
+			reg = <0x5c000000 0x02000000>; /* 32M */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_LOW>;
+		};
+		power_red {
+			gpios = <&gpio ASPEED_GPIO(N, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		power_green {
+			gpios = <&gpio ASPEED_GPIO(F, 1) GPIO_ACTIVE_LOW>;
+		};
+
+		id_blue {
+			gpios = <&gpio ASPEED_GPIO(O, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_red {
+			gpios = <&gpio ASPEED_GPIO(N, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		alarm_yel {
+			gpios = <&gpio ASPEED_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			linux,code = <74>;
+			gpios = <&gpio ASPEED_GPIO(P, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		event-identify {
+			label = "identify";
+			linux,code = <152>;
+			gpios = <&gpio ASPEED_GPIO(O, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+        label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt";
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1debug_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	tmp75@49 {
+		compatible = "ti,tmp75";
+		reg = <0x49>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	occ-hwmon@50 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x50>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	occ-hwmon@51 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x51>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+
+	w83795g@2f {
+		compatible = "nuvoton,w83795g";
+		reg = <0x2f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	occ-hwmon@56 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x56>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	occ-hwmon@57 {
+		compatible = "ibm,p8-occ-hwmon";
+		reg = <0x57>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+
+	rtc@68 {
+		compatible = "maxim,ds3231";
+		reg = <0x68>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	cd-inverted;
+	disable-wp;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
new file mode 100644
index 000000000000..a20a532fc280
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -0,0 +1,704 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+
+/ {
+	model = "Witherspoon BMC";
+	compatible = "ibm,witherspoon-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		vga_memory: region@9f000000 {
+			no-map;
+			compatible = "shared-dma-pool";
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32MM */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-air-water {
+			label = "air-water";
+			gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(B, 5)>;
+		};
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+
+		event-ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 7)>;
+		};
+
+		event-ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 0)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		poll-interval = <1000>;
+
+		event-fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		event-fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		event-fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		event-fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		fan0 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		fan1 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 1 GPIO_ACTIVE_LOW>;
+		};
+
+		fan2 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 2 GPIO_ACTIVE_LOW>;
+		};
+
+		fan3 {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 3 GPIO_ACTIVE_LOW>;
+		};
+
+		front-fault {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 13 GPIO_ACTIVE_LOW>;
+		};
+
+		front-power {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 14 GPIO_ACTIVE_LOW>;
+		};
+
+		front-id {
+			retain-state-shutdown;
+			default-state = "keep";
+			gpios = <&pca0 15 GPIO_ACTIVE_LOW>;
+		};
+
+		rear-fault {
+			gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-id {
+			gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		rear-power {
+			gpios = <&gpio ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+		};
+
+		power-button {
+			gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(E, 0) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "obmc-ubi";
+			};
+		};
+	};
+
+	flash@1 {
+		status = "okay";
+		label = "alt-bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			#address-cells = < 1 >;
+			#size-cells = < 1 >;
+			compatible = "fixed-partitions";
+			u-boot@0 {
+				reg = < 0 0x60000 >;
+				label = "alt-u-boot";
+			};
+			u-boot-env@60000 {
+				reg = < 0x60000 0x20000 >;
+				label = "alt-u-boot-env";
+			};
+			obmc-ubi@80000 {
+				reg = < 0x80000 0x1F80000 >;
+				label = "alt-obmc-ubi";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart2 {
+	/* APSS */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* MUX ->
+	 *    Samtec 1
+	 *    Samtec 2
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	bmp: bmp280@77 {
+		compatible = "bosch,bmp280";
+		reg = <0x77>;
+		#io-channel-cells = <1>;
+	};
+
+	max31785@52 {
+		compatible = "maxim,max31785a";
+		reg = <0x52>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	dps: dps310@76 {
+		compatible = "infineon,dps310";
+		reg = <0x76>;
+		#io-channel-cells = <0>;
+	};
+
+	pca0: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	power-supply@68 {
+		compatible = "ibm,cffps1";
+		reg = <0x68>;
+	};
+
+	power-supply@69 {
+		compatible = "ibm,cffps1";
+		reg = <0x69>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+
+&i2c5 {
+	status = "okay";
+
+	tmp423a@4c {
+		compatible = "ti,tmp423";
+		reg = <0x4c>;
+	};
+
+	ir35221@70 {
+		compatible = "infineon,ir35221";
+		reg = <0x70>;
+	};
+
+	ir35221@71 {
+		compatible = "infineon,ir35221";
+		reg = <0x71>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+
+	tmp275@4a {
+		compatible = "ti,tmp275";
+		reg = <0x4a>;
+	};
+};
+
+&i2c10 {
+	/* MUX
+	 *   -> PCIe Slot 3
+	 *   -> PCIe Slot 4
+	 */
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	pca9552: pca9552@60 {
+		compatible = "nxp,pca9552";
+		reg = <0x60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names = "PS_SMBUS_RESET_N", "APSS_RESET_N",
+			"GPU0_TH_OVERT_N_BUFF",	"GPU1_TH_OVERT_N_BUFF",
+			"GPU2_TH_OVERT_N_BUFF", "GPU3_TH_OVERT_N_BUFF",
+			"GPU4_TH_OVERT_N_BUFF",	"GPU5_TH_OVERT_N_BUFF",
+			"GPU0_PWR_GOOD_BUFF", "GPU1_PWR_GOOD_BUFF",
+			"GPU2_PWR_GOOD_BUFF", "GPU3_PWR_GOOD_BUFF",
+			"GPU4_PWR_GOOD_BUFF", "GPU5_PWR_GOOD_BUFF",
+			"12V_BREAKER_FLT_N", "THROTTLE_UNLATCHED_N";
+
+		gpio@0 {
+			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@1 {
+			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@2 {
+			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@3 {
+			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@4 {
+			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@5 {
+			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@6 {
+			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@7 {
+			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@8 {
+			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@9 {
+			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@10 {
+			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@11 {
+			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@12 {
+			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@13 {
+			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@14 {
+			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+
+		gpio@15 {
+			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&wdt1 {
+	aspeed,reset-type = "none";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+};
+
+&wdt2 {
+	aspeed,alt-boot;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&xdma {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
new file mode 100644
index 000000000000..0cb7b20ff3ab
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Zaius BMC";
+	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
+
+	aliases {
+		i2c15 = &i2cpcie0;
+		i2c16 = &i2cpcie1;
+		i2c17 = &i2cpcie2;
+		i2c19 = &i2cpcie3;
+		i2c20 = &i2cpcie4;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+	};
+
+	onewire0 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire1 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire2 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+	};
+
+	onewire3 {
+		compatible = "w1-gpio";
+		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		event-checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		event-pcie-e2b-present{
+			label = "pcie-e2b-present";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 7)>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sys_boot_status {
+			label = "System boot status";
+			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		attention {
+			label = "Attention";
+			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		plt_fault {
+			label = "Platform fault";
+			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
+		};
+
+		hdd_fault {
+			label = "Onboard drive fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "fsi-master-gpio", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+		     &pinctrl_spi2cs0_default
+		     &pinctrl_spi2cs1_default
+		     &pinctrl_spi2miso_default
+		     &pinctrl_spi2mosi_default>;
+
+	flash@0 {
+		status = "okay";
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	ucd90160@64 {
+		compatible = "ti,ucd90160";
+		reg = <0x64>;
+	};
+
+	/* Power sequencer UCD90160 PMBUS @64h
+	 * FRU AT24C64D @50h
+	 * RTC PCF8523 @68h
+	 * Clock buffer 9DBL04 @6dh
+	 */
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+		i2cpcie2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+		i2ctpm: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 0
+	 *   PCIe 1
+	 *   PCIe 2
+	 *   TPM header
+	 */
+};
+
+&i2c2 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (OOB SMBUS) */
+};
+
+&i2c3 {
+	status = "disabled";
+
+	/* OCP Mezz Connector A (PCIe slot SMBUS) */
+};
+
+&i2c4 {
+	status = "okay";
+
+	i2c-switch@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2cpcie3: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+		i2cpcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+
+	/* MUX1 PCA9546A @71h
+	 *   PCIe 3
+	 *   PCIe 4
+	 */
+};
+
+
+&i2c5 {
+	status = "disabled";
+
+	/* CPU0 PRM 0.7V */
+	/* CPU0 PRM 1.2V CH03 */
+	/* CPU0 PRM 0.8V */
+	/* CPU0 PRM 1.2V CH47 */
+};
+
+&i2c6 {
+	status = "disabled";
+
+	/* CPU1 PRM 0.7V */
+	/* CPU1 PRM 1.2V CH03 */
+	/* CPU1 PRM 0.8V */
+	/* CPU1 PRM 1.2V CH47 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	pca9541a@70 {
+		compatible = "nxp,pca9541";
+		reg = <0x70>;
+
+		i2c-arb {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			hotswap@54 {
+				compatible = "ti,lm5066i";
+				reg = <0x54>;
+			};
+		};
+
+	};
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	vrm@43 {
+		compatible = "infineon,ir38064";
+		reg = <0x43>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+
+	/*
+	 * Brick will be one of these types/addresses.  Depending
+	 * on the board SKU only one is actually present and will successfully
+	 * instantiate while the others will fail the probe operation.
+	 * These are the PVT (and presumably beyond) addresses:
+	 *    12V Quarter Brick DC/DC Converter Q54SJ12050 @6Ah
+	 *    12V Quarter Brick DC/DC Converter Q54SH12050 @30h
+	 */
+	power-brick@6a {
+		compatible = "delta,dps800";
+		reg = <0x6a>;
+	};
+	power-brick@30 {
+		compatible = "delta,dps800";
+		reg = <0x30>;
+	};
+
+	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
+	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @43h */
+	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* Master selector PCA9541A @70h (other master: CPU0)
+	 *   LM5066I PMBUS @10h
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	vrm@64 {
+		compatible = "isil,isl68137";
+		reg = <0x64>;
+	};
+
+	vrm@40 {
+		compatible = "isil,isl68137";
+		reg = <0x40>;
+	};
+
+	vrm@41 {
+		compatible = "isil,isl68137";
+		reg = <0x41>;
+	};
+
+	vrm@42 {
+		compatible = "infineon,ir38064";
+		reg = <0x42>;
+	};
+
+	vrm@60 {
+		compatible = "isil,isl68137";
+		reg = <0x60>;
+	};
+
+	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @64h */
+	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @40h */
+	/* CPU1 VR ISL68137 1.2V CH47 PMBUS @41h */
+	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
+	/* CPU1 VR ISL68137 0.8V PMBUS @60h */
+};
+
+
+&i2c9 {
+	status = "disabled";
+
+	/* Fan board */
+};
+
+&i2c10 {
+	status = "disabled";
+};
+
+&i2c11 {
+	status = "disabled";
+
+	/* GPU sideband */
+};
+
+&i2c12 {
+	status = "disabled";
+};
+
+&i2c13 {
+	status = "disabled";
+
+	/* MUX PI3USB102
+	 *   CPU0 debug
+	 *   CPU1 debug
+	 */
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+
+	pinctrl_gpioh_unbiased: gpioi_unbiased {
+		pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
+		bias-disable;
+	};
+};
+
+&gpio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
+
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	line_iso_u146_en {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	ncsi_mux_en_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	line_bmc_i2c2_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	line_bmc_i2c5_sw_rst_n {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+		&pinctrl_pwm2_default &pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+};
+
+&ibt {
+	status = "okay";
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
new file mode 100644
index 000000000000..a5e64ccc2b3a
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Portwell Neptune BMC";
+	compatible = "portwell,neptune-bmc", "aspeed,ast2500";
+	aliases {
+		serial0 = &uart1;
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		postcode0 {
+			label = "BMC_UP";
+			gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		postcode1 {
+			label = "BMC_HB";
+			gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+		postcode2 {
+			label = "FAULT";
+			gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
+		};
+		// postcode3-7 are GPIOH3-H7
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart1 {
+	// Host Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default
+		     &pinctrl_mdio1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii2_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>,
+		 <&syscon ASPEED_CLK_MAC2RCLK>;
+	clock-names = "MACCLK", "RCLK";
+	use-ncsi;
+};
+
+&i2c1 {
+	status = "okay";
+	// To PCIe slot SMBUS
+};
+
+&i2c2 {
+	status = "okay";
+	// To LAN I210
+};
+
+&i2c3 {
+	status = "okay";
+	// SMBus to COMe AB
+};
+
+&i2c4 {
+	status = "okay";
+	// I2C to COMe AB
+};
+
+&i2c5 {
+	status = "okay";
+// 	USB Debug card
+	pca9555@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	tpm@20 {
+		compatible = "infineon,slb9645tt";
+		reg = <0x20>;
+	};
+	tmp421@4e {
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
new file mode 100644
index 000000000000..259ef3f54c5c
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-qcom-dc-scm-v1.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+
+/ {
+	model = "Qualcomm DC-SCM V1 BMC";
+	compatible = "qcom,dc-scm-v1-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	/* Bootloader sets up the MAC to insert delay */
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy3>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+
+	use-ncsi;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <133000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bios";
+		spi-max-frequency = <133000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BMC_FLASH_MUX_SEL","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"BMC_FWSPI_RST_N","","GPIO_1_BMC_3V3","","","","","",
+	/*O0-O7*/	"JTAG_MUX_A","JTAG_MUX_B","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","SCMFPGA_SPARE_GPIO1_3V3",
+			"SCMFPGA_SPARE_GPIO2_3V3","SCMFPGA_SPARE_GPIO3_3V3",
+			"SCMFPGA_SPARE_GPIO4_3V3","SCMFPGA_SPARE_GPIO5_3V3",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*A0-A7*/	"GPI_1_BMC_1V8","","","","","",
+			"SCMFPGA_SPARE_GPIO1_1V8","SCMFPGA_SPARE_GPIO2_1V8",
+	/*B0-B7*/	"SCMFPGA_SPARE_GPIO3_1V8","SCMFPGA_SPARE_GPIO4_1V8",
+			"SCMFPGA_SPARE_GPIO5_1V8","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","BMC_SPI1_RST_N","BIOS_FLASH_MUX_SEL","",
+			"","TPM2_PIRQ_N","TPM2_RST_N","",
+	/*E0-E7*/	"","","","","","","","";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
new file mode 100644
index 000000000000..9605e53f5bbf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-q71l.dts
@@ -0,0 +1,518 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "aspeed-g4.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Quanta Q71L BMC";
+	compatible = "quanta,q71l-bmc", "aspeed,ast2400";
+
+	aliases {
+		i2c14 = &i2c_pcie2;
+		i2c15 = &i2c_pcie3;
+		i2c16 = &i2c_pcie6;
+		i2c17 = &i2c_pcie7;
+		i2c18 = &i2c_pcie1;
+		i2c19 = &i2c_pcie4;
+		i2c20 = &i2c_pcie5;
+		i2c21 = &i2c_pcie8;
+		i2c22 = &i2c_pcie9;
+		i2c23 = &i2c_pcie10;
+		i2c24 = &i2c_ssd1;
+		i2c25 = &i2c_ssd2;
+		i2c26 = &i2c_psu4;
+		i2c27 = &i2c_psu1;
+		i2c28 = &i2c_psu3;
+		i2c29 = &i2c_psu2;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x8000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@47800000 {
+			no-map;
+			reg = <0x47800000 0x00800000>; /* 8MB */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(B, 0) GPIO_ACTIVE_LOW>;
+		};
+
+		power {
+			gpios = <&gpio ASPEED_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 11>;
+	};
+
+	i2c1mux: i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* mux-gpios = <&sgpio 10 GPIO_ACTIVE_HIGH> */
+		i2c-parent = <&i2c1>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_vgahs_default &pinctrl_vgavs_default
+			&pinctrl_ddcclk_default &pinctrl_ddcdat_default>;
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&vga_memory>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	/* temp2 inlet */
+	tmp75@4c {
+		compatible = "ti,tmp75";
+		reg = <0x4c>;
+	};
+
+	/* temp3 */
+	tmp75@4e {
+		compatible = "ti,tmp75";
+		reg = <0x4e>;
+	};
+
+	/* temp1 */
+	tmp75@4f {
+		compatible = "ti,tmp75";
+		reg = <0x4f>;
+	};
+
+	/* Baseboard FRU */
+	eeprom@54 {
+		compatible = "atmel,24c64";
+		reg = <0x54>;
+	};
+
+	/* FP FRU */
+	eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* 0: PCIe Slot 2,
+	 *    Slot 3,
+	 *    Slot 6,
+	 *    Slot 7
+	 */
+	i2c-switch@74 {
+		compatible = "nxp,pca9546";
+		reg = <0x74>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;  /* may use mux@77 next. */
+
+		i2c_pcie2: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie3: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	/* 0: PCIe Slot 1,
+	 *    Slot 4,
+	 *    Slot 5,
+	 *    Slot 8,
+	 *    Slot 9,
+	 *    Slot 10,
+	 *    SSD 1,
+	 *    SSD 2
+	 */
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;  /* may use mux@74 next. */
+
+		i2c_pcie1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c_pcie4: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c_pcie5: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c_pcie8: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c_pcie9: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c_pcie10: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c_ssd1: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c_ssd2: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* BIOS FRU */
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* 0: PSU4
+	 *    PSU1
+	 *    PSU3
+	 *    PSU2
+	 */
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c_psu4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+
+		i2c_psu1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			psu@58 {
+				compatible = "pmbus";
+				reg = <0x58>;
+			};
+		};
+
+		i2c_psu2: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			psu@59 {
+				compatible = "pmbus";
+				reg = <0x59>;
+			};
+		};
+	};
+
+	/* PDB FRU */
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* BMC FRU */
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+		&pinctrl_pwm1_default
+		&pinctrl_pwm2_default
+		&pinctrl_pwm3_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	fan@6 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c1mux {
+	i2c@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 1 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 2 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 3 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 4 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+
+	i2c@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Memory Riser 5 FRU */
+		eeprom@50 {
+			compatible = "atmel,24c02";
+			reg = <0x50>;
+		};
+
+		/* Memory Riser 6 FRU */
+		eeprom@51 {
+			compatible = "atmel,24c02";
+			reg = <0x51>;
+		};
+
+		/* Memory Riser 7 FRU */
+		eeprom@52 {
+			compatible = "atmel,24c02";
+			reg = <0x52>;
+		};
+
+		/* Memory Riser 8 FRU */
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
new file mode 100644
index 000000000000..46cbba6305b8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-quanta-s6q.dts
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2022 Quanta Corp.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Quanta S6Q BMC";
+	compatible = "quanta,s6q-bmc", "aspeed,ast2600";
+
+	aliases {
+		// bus 0
+		i2c20 = &SMB_HOST_DB2000_3V3AUX_SCL;
+		i2c21 = &U12_PCA9546_CH1;
+		i2c22 = &SMB_HOST_DB800_B_SCL;
+		i2c23 = &SMB_HOST_DB800_C_SCL;
+
+		// bus 1
+		i2c24 = &SMB_M2_P0_1V8AUX_SCL;
+		i2c25 = &SMB_M2_P1_1V8AUX_SCL;
+		i2c26 = &SMB_CPU_PIROM_3V3AUX_SCL;
+		i2c27 = &SMB_TEMP_3V3AUX_SCL;
+		i2c28 = &SMB_IPMB_3V3AUX_SSDSB_SCL;
+		i2c29 = &SMB_IPMB_3V3AUX_SCL;
+		i2c31 = &SMB_FB_SCL;
+
+		// bus 1 - Fan board
+		i2c32 = &SMB_IOEXP_SCL;
+		i2c33 = &SMB_PROGRAM_SCL;
+		i2c34 = &SMB_FB_SCL_CH2;
+		i2c35 = &SMB_FAN_SENSE_SCL;
+
+		// bus 6
+		i2c36 = &U197_PCA9546_CH0;
+		i2c37 = &U197_PCA9546_CH1;
+		i2c38 = &U197_PCA9546_CH2;
+		i2c39 = &U197_PCA9546_CH3;
+
+		//bus 7
+		i2c40 = &SMB_OCP_SFF_3V3AUX_SCL; //OCP1
+		i2c41 = &SMB_OCP_LFF_3V3AUX_SCL; //OCP2
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		BMC_HEARTBEAT_N {
+			label = "BMC_HEARTBEAT_N";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		BMC_LED_STATUS_AMBER_N {
+			label = "BMC_LED_STATUS_AMBER_N";
+			gpios = <&gpio0 ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		FM_ID_LED_N {
+			label = "FM_ID_LED_N";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0 - A7*/	"", "", "", "", "", "", "", "",
+	/*B0 - B7*/	"", "", "", "", "", "", "", "",
+	/*C0 - C7*/	"", "", "", "", "", "", "", "",
+	/*D0 - D7*/	"", "", "", "", "", "", "", "",
+	/*E0 - E7*/	"", "", "", "", "", "", "", "",
+	/*F0 - F7*/	"PLTRST_N", "", "PWR_DEBUG_N", "", "", "", "", "",
+	/*G0 - G7*/	"", "", "", "", "", "", "", "",
+	/*H0 - H7*/	"", "", "", "", "", "", "", "",
+	/*I0 - I7*/	"", "", "", "", "", "", "", "",
+	/*J0 - J7*/	"", "", "", "", "", "", "", "",
+	/*K0 - K7*/	"", "", "", "", "", "", "", "",
+	/*L0 - L7*/	"", "", "", "", "PREQ_N", "TCK_MUX_SEL", "", "",
+	/*M0 - M7*/	"", "", "", "PWRGD_SYS_PWROK", "", "PRDY_N", "", "",
+	/*N0 - N7*/	"", "", "", "", "", "", "", "",
+	/*O0 - O7*/	"", "", "", "", "", "", "", "",
+	/*P0 - P7*/	"SYS_BMC_PWRBTN_R_N", "SYS_PWRBTN_N", "FM_MB_RST_BTN", "RST_BMC_RSTBTN_OUT_N", "", "", "", "",
+	/*Q0 - Q7*/	"", "", "", "", "", "", "", "",
+	/*R0 - R7*/	"", "", "", "", "", "", "", "",
+	/*S0 - S7*/	"", "", "", "FP_ID_BTN_SCM_N", "", "", "", "",
+	/*T0 - T7*/	"", "", "", "", "", "", "", "",
+	/*U0 - U7*/	"", "", "", "", "", "", "", "",
+	/*V0 - V7*/	"", "", "", "", "", "SMI", "", "",
+	/*W0 - W7*/	"", "", "", "", "", "", "", "",
+	/*X0 - X7*/	"", "", "", "", "", "", "", "",
+	/*Y0 - Y7*/	"", "", "", "", "", "", "", "",
+	/*Z0 - Z7*/	"FM_BMC_READY_N", "", "", "", "", "", "", "",
+	/*AA0 - AA7*/	"", "", "", "", "", "", "", "",
+	/*AB0 - AB7*/	"", "", "", "", "", "", "", "",
+	/*AC0 - AC7*/	"", "", "", "", "", "", "", "";
+};
+
+&sgpiom0 {
+	status = "okay";
+	ngpios = <128>;
+	bus-frequency = <48000>;
+	gpio-line-names =
+	/* SGPIO input lines */
+	/*IOA0-IOA7*/	"","", "SIO_POWER_GOOD","OA1", "XDP_PRST_N","", "","", "FM_SLPS3_PLD_N","", "FM_SLPS4_PLD_N","", "FM_BIOS_POST_CMPLT_BMC_N","", "FM_ADR_TRIGGER_N","OA7",
+	/*IOB0-IOB7*/	"FM_ADR_COMPLETE","", "FM_PMBUS_ALERT_B_EN","", "PSU0_PRESENT_N","", "PSU1_PRESENT_N","", "PSU0_VIN_BUF_GOOD","", "PSU01_VIN_BUF_GOOD","", "PWRGD_PS0_PWROK_R","", "PWRGD_PS1_PWROK_R","",
+	/*IOC0-IOC7*/	"PWRGD_PS_PWROK_PLD_R","", "CHASSIS_INTRUSION","", "BMC_MFG_MODE","", "FM_BMC_EN_DET_R","", "FM_ME_BT_DONE","", "CPU1_PRESENCE","", "CPU2_PRESENCE","", "IRQ_PSYS_CRIT_N","",
+	/*IOD0-IOD7*/	"","", "CPU1_THERMTRIP","", "CPU2_THERMTRIP","", "CPU1_MEM_THERM_EVENT","", "CPU2_MEM_THERM_EVENT","", "CPU1_VRHOT","", "CPU2_VRHOT","", "","",
+	/*IOE0-IOE7*/	"","", "CPU1_MEM_VRHOT","", "CPU2_MEM_VRHOT","", "","", "PCH_BMC_THERMTRIP","", "","", "","", "","",
+	/*IOF0-IOF7*/	"CPU_ERR0","", "CPU_ERR1","", "CPU_ERR2","", "","", "","", "CPU_CATERR","", "","", "","",
+	/*IOG0-IOG7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOH0-IOH7*/	"","", "FP_ID_BTN_R1_N","", "FP_RST_BTN_N","", "","", "","", "FP_PWR_BTN_PLD_N_R","", "","", "","",
+	/*IOI0-IOI7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOJ0-IOJ7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOK0-IOK7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOL0-IOL7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*IOM0-IOM7*/	"","", "","", "","", "","", "","", "","", "","", "","",
+	/*ION0-ION7*/	"","BMC_SW_HEARTBEAT_N_R", "","FP_LED_FAULT_N", "","FP_ID_LED_N", "","FM_BMC_RSTBTN_OUT_N", "","FM_THERMTRIP_DLY_LVC1_R_N", "","", "","RST_PCA9548_SENSOR_PLD_N", "","USB_OC1_REAR_N",
+	/*IOO0-IOO7*/	"","IRQ_TPM_SPI_N", "","", "","IRQ_PCH_SCI_WHEA_R_N", "","IRQ_BMC_PCH_NMI_R", "","H_CPU_NMI_LVC1_R_N", "","", "","", "","FM_JTAG_BMC_PLD_MUX_SEL",
+	/*IOP0-IOP7*/	"IP0","OP0", "","", "","", "","", "","", "","", "","", "IP7","OP7";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&mdio2 {
+	status = "okay";
+
+	ethphy2: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii3_default>;
+};
+
+&mac3 {
+	status = "okay";
+
+	phy-mode = "rmii";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii4_default>;
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2_default &pinctrl_spi2cs1_default
+		&pinctrl_spi2cs2_default>;
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi2:0";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA0>;
+};
+
+&kcs2 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xCA2>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	non-removable;
+	bus-width = <4>;
+	max-frequency = <100000000>;
+};
+
+&vhub {
+	status = "okay";
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	U34_PWR_ADC@48 {
+		compatible = "ti,ads7830";
+		reg = <0x48>;
+	};
+
+	U35_PWR_ADC@4b {
+		compatible = "ti,ads7830";
+		reg = <0x4b>;
+	};
+
+	i2c-switch@70 {
+		compatible = "nxp,pca9546";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_HOST_DB2000_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U12_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_HOST_DB800_B_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_HOST_DB800_C_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-switch@59 {
+		compatible = "nxp,pca9848";
+		reg = <0x59>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		SMB_M2_P0_1V8AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_M2_P1_1V8AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		SMB_CPU_PIROM_3V3AUX_SCL: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		SMB_TEMP_3V3AUX_SCL: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			U163_tmp75@48 {
+				compatible = "ti,tmp75";
+				reg = <0x48>;
+			};
+			U114_tmp75@49 {
+				compatible = "ti,tmp75";
+				reg = <0x49>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SSDSB_SCL: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			U4_tmp75@4c {
+				compatible = "ti,tmp75";
+				reg = <0x4c>;
+			};
+			U73_tmp75@4d {
+				compatible = "ti,tmp75";
+				reg = <0x4d>;
+			};
+		};
+
+		SMB_IPMB_3V3AUX_SCL: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			U190_fru@51 {
+				compatible = "atmel,24c128";
+				reg = <0x51>;
+				pagesize = <32>;
+			};
+		};
+
+		SMB_FB_SCL: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-switch@77 {
+				compatible = "nxp,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				SMB_IOEXP_SCL: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				SMB_PROGRAM_SCL: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				SMB_FB_SCL_CH2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				SMB_FAN_SENSE_SCL: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					Current_Meter_U2@45 {
+						compatible = "ti,ina219";
+						reg = <0x45>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					Current_Meter_U3@44 {
+						compatible = "ti,ina219";
+						reg = <0x44>;
+						shunt-resistor = <1000>; /* = 1 mOhm */
+					};
+
+					TEMP_sensor_U2@4b {
+						compatible = "ti,tmp75";
+						reg = <0x4b>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	bus-frequency = <400000>;
+
+	ipmb@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* MB FRU (U173) @ 0xA2 */
+	mb_fru: mb_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	/* FP_U1 Inlet */
+	FP_U1_tmp75@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+
+	FP_U4_fru@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		U197_PCA9546_CH0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		U197_PCA9546_CH1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			cpu0_pvccin@60 {
+				compatible = "isil,raa229004";
+				reg = <0x60>;
+			};
+
+			cpu0_pvccinfaon@61 {
+				compatible = "isil,isl69260";
+				reg = <0x61>;
+			};
+
+			cpu0_pvccd_hv@63 {
+				compatible = "isil,isl69260";
+				reg = <0x63>;
+			};
+		};
+
+		U197_PCA9546_CH2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			cpu1_pvccin@72 {
+				compatible = "isil,raa229004";
+				reg = <0x72>;
+			};
+
+			cpu1_pvccinfaon@74 {
+				compatible = "isil,isl69260";
+				reg = <0x74>;
+			};
+
+			cpu1_pvccd_hv@76 {
+				compatible = "isil,isl69260";
+				reg = <0x76>;
+			};
+		};
+
+		U197_PCA9546_CH3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+};
+
+&i2c7 {
+	status = "okay";
+
+	i2c-switch@75 {
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x75>;
+		i2c-mux-idle-disconnect;
+
+		SMB_OCP_SFF_3V3AUX_SCL: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		SMB_OCP_LFF_3V3AUX_SCL: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c14 {
+	status = "okay";
+
+	/* SCM FRU (U19) @ 0xA2 */
+	scm_fru: scm_fru@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+
+	scm_tmp75_u4@4a {
+		compatible = "ti,tmp75";
+		reg = <0x4a>;
+	};
+};
+
+&i2c15 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
new file mode 100644
index 000000000000..50f3c6a5c0c8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-supermicro-x11spi.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2020 Super Micro Computer, Inc
+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	model = "X11SPI BMC";
+	compatible = "supermicro,x11spi-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "earlycon";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@7f000000 {
+			no-map;
+			reg = <0x7f000000 0x01000000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+};
+
+&gpio {
+    status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+    status = "okay";
+
+    pinctrl-names = "default";
+    pinctrl-0 = <&pinctrl_rmii1_default>;
+    clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+           <&syscon ASPEED_CLK_MAC1RCLK>;
+    clock-names = "MACCLK", "RCLK";
+    use-ncsi;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default &pinctrl_pwm7_default>;
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
new file mode 100644
index 000000000000..aff27c1d4b06
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts
@@ -0,0 +1,528 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S7106 BMC";
+	compatible = "tyan,s7106-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan #0 */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* CPU fan #1 */
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4  */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - IPMB pin header
+	 * - CPU #0 memory error LED @ 0x3A
+	 * - CPU #1 memory error LED @ 0x3C
+	 */
+};
+
+&i2c1 {
+	/* Directly connected to PCH SMBUS #0 */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+
+	/* Also connected to:
+	 * - fan header
+	 * - mini-SAS HD connector
+	 * - SSATA SGPIO
+	 * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
+	 *   to PCH SMBUS #3
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+	/* Also connected to:
+	 * - PCH SMBUS #1
+	 */
+};
+
+&i2c4 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #2
+	 */
+
+	/* Connected via switch to:
+	 * - CPU #0 channels ABC VDDQ @ 0x80
+	 * - CPU #0 channels DEF VDDQ @ 0x81
+	 * - CPU #1 channels ABC VDDQ @ 0x82
+	 * - CPU #1 channels DEF VDDQ @ 0x83
+	 * - CPU #0 VCCIO & VMCP @ 0x52
+	 * - CPU #1 VCCIO & VMCP @ 0x53
+	 * - CPU #0 VCCIN @ 0xC0
+	 * - CPU #0 VSA @ 0xC2
+	 * - CPU #1 VCCIN @ 0xC4
+	 * - CPU #1 VSA @ 0xC6
+	 * - J110
+	 */
+};
+
+&i2c5 {
+	status = "okay";
+
+	/* Connected via switch (PCH_BMC_SMB_SW_P) to:
+	 * - mainboard FRU @ 0xAE
+	 * - XDP connector
+	 * - ME debug header
+	 * - clock buffer @ 0xD8
+	 * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
+	 * - PCH SMBUS
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	/* Connected via switch (BMC_PE_SMB_EN_1_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: PCIE slot 1, SMB #1
+	 * - 0,1: PCIE slot 1, SMB #2
+	 * - 1,0: PCIE slot 2, SMB #1
+	 * - 1,1: PCIE slot 2, SMB #2
+	 */
+
+	/* Connected via switch (BMC_PE_SMB_EN_2_N) to
+	 * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
+	 * - 0,0: OCP0 (A) SMB
+	 * - 0,1: OCP0 (C) SMB
+	 * - 1,0: OCP1 (A) SMB
+	 * - 1,1: NC
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_IDLED_ON_N */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0*/		"",
+	/*C1*/		"",
+	/*C2*/		"",
+	/*C3*/		"",
+	/*C4*/		"id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
+	/*C5*/		"post-complete", /* in: FM_BIOS_POST_CMPLT_N */
+	/*C6*/		"",
+	/*C7*/		"",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: SYS_PWROK_BUF */
+	/*D3*/		"platform-reset", /* in: SYS_PLTRST_N */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_PWBTN_IN_N */
+	/*E1*/		"power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
+	/*E2*/		"reset-button", /* in: BMC_RSTBTN_IN_N */
+	/*E3*/		"reset-control", /* out: BMC_RSTBTN_OUT_N */
+	/*E4*/		"nmi-button", /* in: BMC_NMIBTN_IN_N */
+	/*E5*/		"nmi-control", /* out: BMC_NMIBTN_OUT_N */
+	/*E6*/		"",
+	/*E7*/		"led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_CLR_CMOS_N */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: AST_HW_FAULT_N */
+	/*F5*/		"",
+	/*F6*/		"",
+	/*F7*/		"",
+	/*G0*/		"BMC_PE_SMB_EN_1_N", /* out */
+	/*G1*/		"BMC_PE_SMB_EN_2_N", /* out */
+	/*G2*/		"",
+	/*G3*/		"",
+	/*G4*/		"",
+	/*G5*/		"",
+	/*G6*/		"",
+	/*G7*/		"",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"BMC_PE_SMB_SW_BIT0", /* out */
+	/*Q5*/		"BMC_PE_SMB_SW_BIT1", /* out */
+	/*Q6*/		"",
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"BMC_SMB3_PCH_IE_SML3_EN", /* out */
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"",
+	/*AB0-AB7*/	"","","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts b/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts
new file mode 100644
index 000000000000..f6c4549c0ac4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-tyan-s8036.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Tyan S8036 BMC";
+	compatible = "tyan,s8036-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		p2a_memory: region@987f0000 {
+			no-map;
+			reg = <0x987f0000 0x00010000>; /* 64KB */
+		};
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>; /* 16M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
+		};
+
+		heartbeat {
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>;
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 15>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		label = "bmc";
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		label = "pnor";
+		m25p,fast-read;
+	};
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	/* RS-232 connector on header */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+			&pinctrl_rxd2_default>;
+};
+
+&uart3 {
+	/* Alternative to vuart to internally connect (route) to uart1
+	 * when vuart cannot be used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart4 {
+	/* Alternative to vuart to internally connect (route) to the
+	 * external port usually used by uart1 when vuart cannot be
+	 * used due to BIOS limitations.
+	 */
+	status = "okay";
+};
+
+&uart5 {
+	/* BMC "debug" (console) UART; connected to RS-232 connector
+	 * on header; selectable via jumpers as alternative to uart2
+	 */
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+
+	/* We enable the VUART here, but leave it in a state that does
+	 * not interfere with the SuperIO. The goal is to have both the
+	 * VUART and the SuperIO available and decide at runtime whether
+	 * the VUART should actually be used. For that reason, configure
+	 * an "invalid" IO address and an IRQ that is not used by the
+	 * BMC.
+	 */
+	aspeed,lpc-io-reg = <0xffff>;
+	aspeed,lpc-interrupts = <15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&p2a {
+	status = "okay";
+	memory-region = <&p2a_memory>;
+};
+
+&lpc_snoop {
+	status = "okay";
+	snoop-ports = <0x80>;
+};
+
+&adc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default
+			&pinctrl_pwm1_default
+			&pinctrl_pwm3_default
+			&pinctrl_pwm4_default>;
+
+	/* CPU fan */
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+
+	/* PWM group for chassis fans #1, #2, #3 and #4 */
+	fan@2 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+
+	fan@4 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+
+	fan@5 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+
+	/* PWM group for chassis fans #5 and #6  */
+	fan@6 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+
+	fan@7 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x07>;
+	};
+};
+
+&i2c0 {
+	/* Directly connected to Sideband-Temperature Sensor Interface (APML) */
+	status = "okay";
+};
+
+&i2c1 {
+	/* Directly connected to IPMB HDR. */
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	/* BMC EEPROM, incl. mainboard FRU */
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+	};
+	/* Also connected to:
+	 * - BCM5720
+	 * - FPGA
+	 * - FAN HDR
+	 * - FPIO HDR
+	 */
+};
+
+&i2c3 {
+	status = "okay";
+
+	/* PSU1 FRU @ 0xA0 */
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* PSU2 FRU @ 0xA2 */
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	/* PSU1 @ 0xB0 */
+	power-supply@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	/* PSU2 @ 0xB2 */
+	power-supply@59 {
+		compatible = "pmbus";
+		reg = <0x59>;
+	};
+
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+	/* Hardware monitor with temperature sensors */
+	nct7802@28 {
+		compatible = "nuvoton,nct7802";
+		reg = <0x28>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 { /* LTD */
+			reg = <0>;
+			status = "okay";
+		};
+
+		channel@1 { /* RTD1 */
+			reg = <1>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@2 { /* RTD2 */
+			reg = <2>;
+			status = "okay";
+			sensor-type = "temperature";
+			temperature-mode = "thermistor";
+		};
+
+		channel@3 { /* RTD3 */
+			reg = <3>;
+			status = "okay";
+			sensor-type = "temperature";
+		};
+	};
+
+	/* Also connected to:
+	 * - PCA9544
+	 * - CLK BUFF
+	 * - OCP FRU
+	 */
+};
+
+&i2c6 {
+	status = "okay";
+	/* Connected to:
+	 * - PCA9548 @0xE0
+	 * - PCA9548 @0xE2
+	 * - PCA9544 @0xE4
+	 */
+};
+
+&i2c7 {
+	status = "okay";
+
+	/* Connected to:
+	 * - PCH SMBUS #4
+	 */
+};
+
+&i2c8 {
+	status = "okay";
+
+	/* Not connected */
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&kcs1 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca8>;
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+	aspeed,lpc-interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+/* We're following the GPIO naming as defined at
+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
+ *
+ * Notes on led-identify and id-button:
+ * - A physical button is connected to id-button which
+ *   triggers the clock on a D flip-flop. The /Q output of the
+ *   flip-flop drives its D input.
+ * - The flip-flop's Q output drives led-identify which is
+ *   connected to LEDs.
+ * - With that, every button press toggles the LED between on and off.
+ *
+ * Notes on power-, reset- and nmi- button and control:
+ * - The -button signals can be used to monitor physical buttons.
+ * - The -control signals can be used to actuate the specific
+ *   operation.
+ * - In hardware, the -button signals are connected to the -control
+ *   signals through drivers with the -control signals being
+ *   protected through diodes.
+ */
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0*/		"",
+	/*A1*/		"",
+	/*A2*/		"led-identify", /* in/out: BMC_CHASSIS_ID_LED_L */
+	/*A3*/		"",
+	/*A4*/		"",
+	/*A5*/		"",
+	/*A6*/		"",
+	/*A7*/		"",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0*/		"",
+	/*D1*/		"",
+	/*D2*/		"power-chassis-good", /* in: PWR_GOOD_LED -- Check if this is Z3?*/
+	/*D3*/		"platform-reset", /* in: RESET_LED_L */
+	/*D4*/		"",
+	/*D5*/		"",
+	/*D6*/		"",
+	/*D7*/		"",
+	/*E0*/		"power-button", /* in: BMC_SYS_MON_PWR_BTN_L */
+	/*E1*/		"power-chassis-control", /* out: BMC_ASSERT_PWR_BTN */
+	/*E2*/		"reset-button", /* in: BMC_SYS_MOS_RST_BTN_L*/
+	/*E3*/		"reset-control", /* out: BMC_ASSERT_RST_BTN */
+	/*E4*/		"nmi-button", /* in: BMC_SYS_MON_NMI_BTN_L */
+	/*E5*/		"nmi-control", /* out: BMC_ASSERT_NMI_BTN */
+	/*E6*/		"TSI_RESERT",
+	/*E7*/		"led-heartbeat", /* out: BMC_GPIOE7 */
+	/*F0*/		"",
+	/*F1*/		"clear-cmos-control", /* out: BMC_ASSERT_CLR_CMOS_L */
+	/*F2*/		"",
+	/*F3*/		"",
+	/*F4*/		"led-fault", /* out: BMC_HWM_FAULT_LED_L */
+	/*F5*/		"BMC_SYS_FAULT_LED_L",
+	/*F6*/		"BMC_ASSERT_BIOS_WP_L",
+	/*F7*/		"",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0*/		"",
+	/*Q1*/		"",
+	/*Q2*/		"",
+	/*Q3*/		"",
+	/*Q4*/		"",
+	/*Q5*/		"",
+	/*Q6*/		"id-button", /* in: BMC_CHASSIS_ID_BTN_L */
+	/*Q7*/		"",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z2*/	"","","",
+	/*Z3*/		"post-complete", /* BMC_SYS_MON_PWROK */
+	/*Z4-Z7*/	"","","","",
+	/*AA0*/		"",
+	/*AA1*/		"",
+	/*AA2*/		"",
+	/*AA3*/		"",
+	/*AA4*/		"",
+	/*AA5*/		"",
+	/*AA6*/		"",
+	/*AA7*/		"BMC_ASSERT_BMC_READY",
+	/*AB0*/		"BMC_SPD_SEL",
+	/*AB1-AB7*/	"","","","","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
new file mode 100644
index 000000000000..7ab29129d1e4
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-ufispace-ncplite.dts
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2022 Ufispace Co., Ltd.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Ufispace NCPLite BMC";
+	compatible = "ufispace,ncplite-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200n8 earlycon";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		fan-status-int-l {
+			label = "fan-status-int-l";
+			gpios = <&gpio0 ASPEED_GPIO(M, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(M, 2)>;
+		};
+
+		allpwr-good {
+			label = "allpwr-good";
+			gpios = <&gpio0 ASPEED_GPIO(V, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(V, 4)>;
+		};
+
+		psu0-alert-n {
+			label = "psu0-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 1) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 1)>;
+		};
+
+		psu1-alert-n {
+			label = "psu1-alert-n";
+			gpios = <&gpio0 ASPEED_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 2)>;
+		};
+
+		int-thermal-alert {
+			label = "int-thermal-alert";
+			gpios = <&gpio0 ASPEED_GPIO(P, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(P, 2)>;
+		};
+
+		cpu-caterr-l {
+			label = "cpu-caterr-l";
+			gpios = <&gpio0 ASPEED_GPIO(N, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(N, 3)>;
+		};
+
+		cpu-thermtrip-l {
+			label = "cpu-thermtrip-l";
+			gpios = <&gpio0 ASPEED_GPIO(V, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(V, 5)>;
+		};
+
+		psu0-presence-l {
+			label = "psu0-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 6) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 6)>;
+		};
+
+		psu1-presence-l {
+			label = "psu1-presence-l";
+			gpios = <&gpio0 ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(F, 7)>;
+		};
+
+		psu0-power-ok {
+			label = "psu0-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 4) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 4)>;
+		};
+
+		psu1-power-ok {
+			label = "psu1-power-ok";
+			gpios = <&gpio0 ASPEED_GPIO(M, 5) GPIO_ACTIVE_HIGH>;
+			linux,code = <ASPEED_GPIO(M, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&fan_ioexp 2 GPIO_ACTIVE_LOW>;
+			linux,code = <2>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&fan_ioexp 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&fan_ioexp 10 GPIO_ACTIVE_LOW>;
+			linux,code = <10>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&fan_ioexp 14 GPIO_ACTIVE_LOW>;
+			linux,code = <14>;
+		};
+	};
+};
+
+&mac2 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii3_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>,
+		 <&syscon ASPEED_CLK_MAC3RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-64-alt.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&kcs3 {
+	status = "okay";
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&lpc_reset {
+	status = "okay";
+};
+
+&lpc_ctrl {
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+};
+
+&peci0 {
+	status = "okay";
+};
+
+&udc {
+	status = "okay";
+};
+
+&adc0 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref = <2500>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		&pinctrl_adc10_default &pinctrl_adc11_default
+		&pinctrl_adc12_default &pinctrl_adc13_default
+		&pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	lm75@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	lm86@4c {
+		compatible = "national,lm86";
+		reg = <0x4c>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	lm75@4f {
+		cpmpatible = "national,lm75";
+		reg = <0x4f>;
+	};
+
+	fan_ioexp: pca9535@20 {
+		compatible = "nxp,pca9535";
+		reg = <0x20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		gpio-line-names =
+		"","","presence-fan0","",
+		"","","presence-fan1","",
+		"","","presence-fan2","",
+		"","","presence-fan3","";
+	};
+};
+
+&i2c3 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c128";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c4 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	psu@58 {
+		compatible = "pmbus";
+		reg = <0x58>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <1>;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+
+	lm75@4d {
+		compatible = "national,lm75";
+		reg = <0x4d>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"CPU_PWRGD","","","power-button","host0-ready","","presence-ps0","presence-ps1",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","reset-button","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"power-chassis-control0","power-chassis-control1","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","power-chassis-good","","","";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts
new file mode 100644
index 000000000000..24319267d550
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman-n110.dts
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN N110 BMC";
+	compatible = "yadro,vegman-n110-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","PCIE_NIC_ALERT","","","SKT0_FAULT_LED","","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "", "", "", "", "PE_PCH_SCR_CLKREQ", "",
+		/*IO1.0-1.7*/	"", "PE_PCH_MEZ_PRSNT", "PE_PCH_MEZ_PRSNT_", "NIC_4_PE_PRSNT", "NIC_3_PE_PRSNT", "NIC_2_PE_PRSNT", "NIC_1_PE_PRSNT", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "", "", "",
+		/*IO3.0-3.7*/	"", "", "", "", "", "", "", "",
+		/*IO4.0-4.7*/	"", "", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x06>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts
new file mode 100644
index 000000000000..ebbb68b55559
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman-rx20.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Rx20 BMC";
+	compatible = "yadro,vegman-rx20-bmc", "aspeed,ast2500";
+
+	leds {
+		compatible = "gpio-leds";
+
+		temp_alarm {
+			label = "temp:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		temp_ok {
+			label = "temp:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_fault {
+			label = "psu:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		psu_ok {
+			label = "psu:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CASE_OPEN_DNP","CASE_OPEN_FAULT_RST_DNP","BEZEL_ON_PWR_P3V3","PWM_PWRGD_EXP_EN","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","LED_TEMP_STATUS_R","LED_TEMP_STATUS_G","LED_PWR_STATUS_R","LED_PWR_STATUS_G",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED_DNP","SKT1_FAULT_LED_DNP","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","SPI_BMC_BOOT_HD","IRQ_NMI_EVENT","SPI_BMC_BOOT_WP","SPI_BMC_BOOT_WP1","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"SEL_FLASH_SOFT","STATUS_SEL_BMC","","","BMC_WDT_P","ID_BUTTON","PS_PWROK","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","SPI_BIOS_ACTIVE_FLASH_SEL","STATUS_SEL_BIOS",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_BMC_BOOT_CS1","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","RSR_A_SMBEXP_RST_INT","RSR_B_SMBEXP_RST_INT","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","BMC_WDT_RST1","BMC_WDT_RST2","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"ETH3_CLK_REQ", "ETH2_CLK_REQ", "RSR_A_PCIE_X16_2_PRSNT", "RSR_B_PCIE_X16_2_PRSNT", "", "RSR_B_PCIE_X8_3_PRSNT", "RSR_B_PCIE_X8_4_PRSNT", "RSR_B_PCIE_X16_PRSNT_N",
+		/*IO1.0-1.7*/	"RSR_B_PCIE_X8_2_PRSNT", "RSR_B_PCIE_X8_1_PRSNT", "NIC_1_PE_BUF_PRSNT", "RSR_A_PCIE_X16_PRSNT", "RSR_A_PCIE_X8_3_PRSNT", "RSR_A_PCIE_X8_2_PRSNT", "RSR_A_PCIE_X8_1_PRSNT_N", "";
+	};
+	gpio@23 {
+		compatible = "nxp,pcal9535";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "FM_LINK_WIDTH_ID0", "", "", "",
+		/*IO1.0-1.7*/	"", "", "", "", "", "", "", "";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PCH_PWR_RESET_N", "FM_BOARD_SKU_ID0", "FM_BOARD_SKU_ID1", "FM_BOARD_SKU_ID2", "FM_BOARD_SKU_ID3", "FM_BOARD_SKU_ID4", "FM_BOARD_REV_ID0", "FM_BOARD_REV_ID1";
+	};
+	gpio@39 {
+		compatible = "nxp,pca9554";
+		reg = <0x39>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"FAN_FAULT_0", "FAN_FAULT_1", "FAN_FAULT_2", "FAN_FAULT_3", "FAN_FAULT_4", "FAN_FAULT_5", "FAN_FAULT_6", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@70 {
+		compatible = "nxp,pca9548";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+			rsra-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+		};
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9548";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			rsrb-mux@72 {
+				compatible = "nxp,pca9548";
+				reg = <0x72>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+					at24@50 {
+						compatible = "atmel,24c64";
+						reg = <0x50>;
+						pagesize = <32>;
+						size = <8192>;
+						address-width = <16>;
+					};
+				};
+			};
+			at24@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+				pagesize = <32>;
+				size = <8192>;
+				address-width = <16>;
+			};
+		};
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00 0x07>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01 0x08>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02 0x09>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03 0x0A>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0B>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0C>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0D>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts
new file mode 100644
index 000000000000..e36ee4704994
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman-sx20.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+/dts-v1/;
+
+#include "aspeed-bmc-vegman.dtsi"
+
+/ {
+	model = "YADRO VEGMAN Sx20 BMC";
+	compatible = "yadro,vegman-sx20-bmc", "aspeed,ast2500";
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"CHASSIS_INTRUSION","CASE_OPEN_FAULT_RST","","","SPEAKER_BMC","FM_FORCE_BMC_UPDATE","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON","POWER_OUT","","","","",
+	/*F0-F7*/	"NMI_OUT","CPU1_DISABLE_COD","","","SKT0_FAULT_LED","SKT1_FAULT_LED","RST_RGMII_PHYRST_DNP","",
+	/*G0-G7*/	"CPU_ERR2","CPU_CATERR","PCH_BMC_THERMTRIP","","IRQ_NMI_EVENT","","","",
+	/*H0-H7*/	"PWRGD_P3V3_RISER1","PWRGD_P3V3_RISER2","PWRGD_P3V3_RISER3","","MIO_BIOS_SEL","_SPI_FLASH_HOLD","_SPI_FLASH_WP","FM_240VA_STATUS",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","BMC_GPU_RISER_ID1","BMC_GPU_RISER_ID0","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","_SPI2_BMC_CS_SEL",
+	/*P0-P7*/	"","P12V_HDDS_A_EN","P12V_HDDS_B_EN","P5V_HDDS_A_EN","PWRGD_P5V_HDDS_A","P5V_HDDS_B_EN","PWRGD_P5V_HDDS_B","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"_SPI_RMM4_LITE_CS","","","","","","","",
+	/*S0-S7*/	"_SPI2_BMC_CS1","","","IRQ_SML0_ALERT_MUX","FP_LED_STATUS_GREEN","FP_LED_STATUS_AMBER","FP_ID_LED","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","","SIO_ONCONTROL","","","","",
+	/*Z0-Z7*/	"FM_BMC_PWR_BTN","SIO_POWER_GOOD","FM_BMC_PWRBTN_OUT","FM_BMC_PCH_SCI_LPC","","","","",
+	/*AA0-AA7*/	"CPU_CLK_MUX_SEL","IRQ_SML1_PMBUS_ALERT","FM_PVCCIN_CPU0_PWR_IN_ALERT","FM_PVCCIN_CPU1_PWR_IN_ALERT","BMC_SYS_PWR_FAULT","BMC_SYS_PWR_OK","SMI","POST_COMPLETE",
+	/*AB0-AB7*/	"FM_CPU_BMCINIT","NMI_BUTTON","ID_BUTTON","PS_PWROK","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
+&sgpio {
+	ngpios = <80>;
+	bus-frequency = <2000000>;
+	status = "okay";
+	/* SGPIO lines. even: input, odd: output */
+	gpio-line-names =
+	/*A0-A7*/	"CPU1_PRESENCE","","CPU1_THERMTRIP","","CPU1_VRHOT","","CPU1_FIVR_FAULT","","CPU1_MEM_ABCD_VRHOT","","CPU1_MEM_EFGH_VRHOT","","","","","",
+	/*B0-B7*/	"CPU1_MISMATCH","","CPU1_MEM_THERM_EVENT","","CPU2_PRESENCE","","CPU2_THERMTRIP","","CPU2_VRHOT","","CPU2_FIVR_FAULT","","CPU2_MEM_ABCD_VRHOT","","CPU2_MEM_EFGH_VRHOT","",
+	/*C0-C7*/	"","","","","CPU2_MISMATCH","","CPU2_MEM_THERM_EVENT","","","","","","","","","",
+	/*D0-D7*/	"","","","","","","","","","","","","","","","",
+	/*E0-E7*/	"","","","","","","","","","","","","","","","",
+	/*F0-F7*/	"SGPIO_PLD_MINOR_REV_BIT0","","SGPIO_PLD_MINOR_REV_BIT1","","SGPIO_PLD_MINOR_REV_BIT2","","SGPIO_PLD_MINOR_REV_BIT3","","SGPIO_PLD_MAJOR_REV_BIT0","","SGPIO_PLD_MAJOR_REV_BIT1","","SGPIO_PLD_MAJOR_REV_BIT2","","SGPIO_PLD_MAJOR_REV_BIT3","",
+	/*G0-G7*/	"MAIN_PLD_MINOR_REV_BIT0","","MAIN_PLD_MINOR_REV_BIT1","","MAIN_PLD_MINOR_REV_BIT2","","MAIN_PLD_MINOR_REV_BIT3","","MAIN_PLD_MAJOR_REV_BIT0","","MAIN_PLD_MAJOR_REV_BIT1","","MAIN_PLD_MAJOR_REV_BIT2","","MAIN_PLD_MAJOR_REV_BIT3","",
+	/*H0-H7*/	"","","","","","","","","","","","","","","","",
+	/*I0-I7*/	"","","","","","","","","","","","","","","","",
+	/*J0-J7*/	"","","","","","","","","","","","","","","","";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	gpio@21 {
+		compatible = "nxp,pcal9535";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"", "", "CPU1_PE3_0_SLOT_PRSNT", "", "CPU1_PE1_GPU_PRSNT", "CPU1_PE3_1_SLOT_PRSNT", "PE_PCH_MEZ_PRSNT", "CPU0_PE3_1_SLOT_PRSNT",
+		/*IO1.0-1.7*/	"CPU0_PE1_GPU_PRSNT", "CPU0_PE2_NVME2_PRSNT", "CPU1_PE2_NVME3_PRSNT", "CPU1_PE2_SLOT_PRSNT", "CPU1_PE2_NVME4_PRSNT", "", "CPU0_PE2_NVME1_PRSNT", "CPU0_PE3_0_RAID_PRSNT";
+	};
+	gpio@27 {
+		compatible = "nxp,pca9698";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+		/*IO0.0-0.7*/	"PWRGD_PS_PWROK", "PWRGD_DSW_PWROK", "PWRGD_P5V_AUX", "PWRGD_P3V3_AUX", "PWRGD_P5V", "PWRGD_P3V3", "PWRGD_P1V8_PCH_AUX", "PWRGD_PCH_PVNN_AUX",
+		/*IO1.0-1.7*/	"PWRGD_P1V05_PCH_AUX", "PWRGD_PCH_AUX_VRS", "PWRGD_PVCCIN_CPU0", "PWRGD_PVCCSA_CPU0", "PWRGD_PVCCIO_CPU0", "PWRGD_PVMCP_CPU0", "PWRGD_P1V0_CPU0", "PWRGD_PVDDQ_ABC_CPU0",
+		/*IO2.0-2.7*/	"PWRGD_PVPP_ABC_CPU0", "PWRGD_PVTT_ABC_CPU0", "PWRGD_PVDDQ_DEF_CPU0", "PWRGD_PVPP_DEF_CPU0", "PWRGD_PVTT_DEF_CPU0", "PWRGD_PVCCIN_CPU1", "PWRGD_PVCCSA_CPU1", "PWRGD_PVCCIO_CPU1",
+		/*IO3.0-3.7*/	"PWRGD_PVMCP_CPU1", "PWRGD_P1V0_CPU1", "PWRGD_PVDDQ_GHJ_CPU1", "PWRGD_PVPP_GHJ_CPU1", "PWRGD_PVTT_GHJ_CPU1", "PWRGD_PVDDQ_KLM_CPU1", "PWRGD_PVPP_KLM_CPU1", "PWRGD_PVTT_KLM_CPU1",
+		/*IO4.0-4.7*/	"PWRGD_P5V_HDDS_A_R", "PWRGD_P5V_HDDS_B_R", "", "", "", "", "", "";
+	};
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	mux-expa@73 {
+		compatible = "nxp,pca9545";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+	mux-sata@71 {
+		compatible = "nxp,pca9543";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	mux-expb@71 {
+		compatible = "nxp,pca9545";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
+			 &pinctrl_pwm2_default &pinctrl_pwm3_default
+			 &pinctrl_pwm4_default &pinctrl_pwm5_default
+			 &pinctrl_pwm6_default>;
+
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+	fan@2 {
+		reg = <0x02>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+	};
+	fan@3 {
+		reg = <0x03>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+	};
+	fan@4 {
+		reg = <0x04>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+	};
+	fan@5 {
+		reg = <0x05>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x05>;
+	};
+	fan@6 {
+		reg = <0x06>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x06>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi
new file mode 100644
index 000000000000..1a5b25b2ea29
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-vegman.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (C) 2021 YADRO
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		serial4 = &uart5;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		ramoops@9eff0000{
+			compatible = "ramoops";
+			reg = <0x9eff0000 0x10000>;
+			record-size = <0x2000>;
+			console-size = <0x2000>;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		identify {
+			label = "platform:blue:indicator";
+			linux,default-trigger = "heartbeat";
+			gpios = <&gpio ASPEED_GPIO(S, 6) GPIO_ACTIVE_LOW>;
+		};
+
+		status_amber {
+			label = "platform:red:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 5) GPIO_ACTIVE_LOW>;
+		};
+
+		status_green {
+			label = "platform:green:status";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_fault {
+			label = "platform:red:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
+		};
+
+		power_ok {
+			label = "platform:green:power";
+			default-state = "off";
+			gpios = <&gpio ASPEED_GPIO(AA, 5) GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&timer 5 1000000 0>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		label = "bmc";
+		m25p,fast-read;
+#include "openbmc-flash-layout-64.dtsi"
+	};
+};
+
+&spi2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2ck_default
+			&pinctrl_spi2miso_default
+			&pinctrl_spi2mosi_default
+			&pinctrl_spi2cs0_default>;
+	flash@0 {
+		status = "okay";
+		label = "bios";
+		m25p,fast-read;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+};
+
+&mac1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+
+	phy-mode = "rgmii";
+	phy-handle = <&phy>;
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			/* KSZ9131 */
+			compatible = "ethernet-phy-id0022.1640";
+			reg = <1>;
+
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+	disable-wp;
+};
+
+&timer {
+	fttmr010,pwm-outputs = <5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_timer5_default>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&vuart {
+	status = "okay";
+};
+
+&kcs3 {
+	aspeed,lpc-io-reg = <0xCA2>;
+	status = "okay";
+};
+
+&kcs4 {
+	aspeed,lpc-io-reg = <0xCA4>;
+	status = "okay";
+};
+
+&lpc_snoop {
+	snoop-ports = <0x80>;
+	status = "okay";
+};
+
+&uart_routing {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&i2c0 {
+	/* SMB_IPMB_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c1 {
+	/* SMB_CHASSENSOR_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c2 {
+	/* SMB_PCIE_STBY_LVC3 */
+	status = "okay";
+};
+
+&i2c3 {
+	/* SMB_HOST_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c4 {
+	/* BMC_PMBUS2_STBY */
+	status = "okay";
+};
+
+&i2c5 {
+	/* SMB_SMLINK0_STBY_LVC3 */
+	bus-frequency = <1000000>;
+	multi-master;
+	status = "okay";
+};
+
+&i2c6 {
+	/* SMB_TEMPSENSOR_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c7 {
+	/* SMB_SM_PMB1_SML1_STBY_LVC3 */
+	multi-master;
+	status = "okay";
+};
+
+&i2c9 {
+	/* SMB_BMC_ETH3_LVC3 */
+	status = "okay";
+};
+
+&i2c10 {
+	/* SMB_BMC_ETH2_LVC3 */
+	status = "okay";
+};
+
+&i2c11 {
+	/* SMB_BMC_MGMT_LVC3 */
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		size = <8192>;
+		address-width = <16>;
+	};
+};
+
+&i2c12 {
+	/* SMB_BMC_FAULT_EXP_LVC3 */
+	status = "okay";
+};
+
+&i2c13 {
+	/* SMB_PCIE2_STBY_LVC3 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
new file mode 100644
index 000000000000..530491ae5eb2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -0,0 +1,1453 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2400";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0x94>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@3 {
+				reg = < 3 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+			flash@4 {
+				reg = < 4 >;
+				compatible = "jedec,spi-nor";
+				spi-rx-bus-width = <2>;
+				spi-max-frequency = <50000000>;
+				status = "disabled";
+			};
+		};
+
+		spi: spi@1e630000 {
+			reg = <0x1e630000 0x18>, <0x30000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2400-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xffffffff 0x0007ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
+			valid-sources = <0x7fffffff>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2400-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2h_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2400-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2400-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2d_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				p2a: p2a-control@2c {
+					reg = <0x2c 0x4>;
+					compatible = "aspeed,ast2400-p2a-ctrl";
+					status = "disabled";
+				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2400-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4>;
+				};
+
+				pinctrl: pinctrl@80 {
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					compatible = "aspeed,ast2400-pinctrl";
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2400-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x8000>;	// 32K
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2400-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2400-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2400-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2400-gpio";
+				reg = <0x1e780000 0x1000>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 220>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2400-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785000 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2400-wdt";
+				reg = <0x1e785020 0x1c>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2400-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2400-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2400-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2400-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2400-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2400-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2400-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2400-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2400-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2400-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_extrst_default: extrst_default {
+		function = "EXTRST";
+		groups = "EXTRST";
+	};
+
+	pinctrl_flack_default: flack_default {
+		function = "FLACK";
+		groups = "FLACK";
+	};
+
+	pinctrl_flbusy_default: flbusy_default {
+		function = "FLBUSY";
+		groups = "FLBUSY";
+	};
+
+	pinctrl_flwp_default: flwp_default {
+		function = "FLWP";
+		groups = "FLWP";
+	};
+
+	pinctrl_gpid_default: gpid_default {
+		function = "GPID";
+		groups = "GPID";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_ndts4_default: ndts4_default {
+		function = "NDTS4";
+		groups = "NDTS4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rom16_default: rom16_default {
+		function = "ROM16";
+		groups = "ROM16";
+	};
+
+	pinctrl_rom8_default: rom8_default {
+		function = "ROM8";
+		groups = "ROM8";
+	};
+
+	pinctrl_romcs1_default: romcs1_default {
+		function = "ROMCS1";
+		groups = "ROMCS1";
+	};
+
+	pinctrl_romcs2_default: romcs2_default {
+		function = "ROMCS2";
+		groups = "ROMCS2";
+	};
+
+	pinctrl_romcs3_default: romcs3_default {
+		function = "ROMCS3";
+		groups = "ROMCS3";
+	};
+
+	pinctrl_romcs4_default: romcs4_default {
+		function = "ROMCS4";
+		groups = "ROMCS4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sgpmck_default: sgpmck_default {
+		function = "SGPMCK";
+		groups = "SGPMCK";
+	};
+
+	pinctrl_sgpmi_default: sgpmi_default {
+		function = "SGPMI";
+		groups = "SGPMI";
+	};
+
+	pinctrl_sgpmld_default: sgpmld_default {
+		function = "SGPMLD";
+		groups = "SGPMLD";
+	};
+
+	pinctrl_sgpmo_default: sgpmo_default {
+		function = "SGPMO";
+		groups = "SGPMO";
+	};
+
+	pinctrl_sgpsck_default: sgpsck_default {
+		function = "SGPSCK";
+		groups = "SGPSCK";
+	};
+
+	pinctrl_sgpsi0_default: sgpsi0_default {
+		function = "SGPSI0";
+		groups = "SGPSI0";
+	};
+
+	pinctrl_sgpsi1_default: sgpsi1_default {
+		function = "SGPSI1";
+		groups = "SGPSI1";
+	};
+
+	pinctrl_sgpsld_default: sgpsld_default {
+		function = "SGPSLD";
+		groups = "SGPSLD";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spics1_default: spics1_default {
+		function = "SPICS1";
+		groups = "SPICS1";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2h_default: usb2h_default {
+		function = "USB2H1";
+		groups = "USB2H1";
+	};
+
+	pinctrl_usb2d_default: usb2d_default {
+		function = "USB2D1";
+		groups = "USB2D1";
+	};
+
+	pinctrl_vgabios_rom_default: vgabios_rom_default {
+		function = "VGABIOS_ROM";
+		groups = "VGABIOS_ROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi18_default: vpi18_default {
+		function = "VPI18";
+		groups = "VPI18";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpi30_default: vpi30_default {
+		function = "VPI30";
+		groups = "VPI30";
+	};
+
+	pinctrl_vpo12_default: vpo12_default {
+		function = "VPO12";
+		groups = "VPO12";
+	};
+
+	pinctrl_vpo24_default: vpo24_default {
+		function = "VPO24";
+		groups = "VPO24";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
new file mode 100644
index 000000000000..04f98d1dbb97
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -0,0 +1,1661 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dt-bindings/clock/aspeed-clock.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2500";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&vic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,arm1176jzf-s";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <19>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x38000000 0x08000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2500-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		vic: interrupt-controller@1e6c0080 {
+			compatible = "aspeed,ast2400-vic";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			valid-sources = <0xfefff7ff 0x0807ffff>;
+			reg = <0x1e6c0080 0x80>;
+		};
+
+		cvic: copro-interrupt-controller@1e6c2000 {
+			compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
+			valid-sources = <0xffffffff>;
+			copro-sw-interrupts = <1>;
+			reg = <0x1e6c2000 0x80>;
+		};
+
+		mac0: ethernet@1e660000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			interrupts = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ethernet@1e680000 {
+			compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			interrupts = <3>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2500-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <13>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2500-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <14>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an explicit pinmux
+			 * override if you don't enable EHCI
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2500-usb-vhub";
+			reg = <0x1e6a0000 0x300>;
+			interrupts = <5>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <5>;
+			aspeed,vhub-generic-endpoints = <15>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edac: memory-controller@1e6e0000 {
+				compatible = "aspeed,ast2500-sdram-edac";
+				reg = <0x1e6e0000 0x174>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2500-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1a8>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
+				};
+
+				p2a: p2a-control@2c {
+					compatible = "aspeed,ast2500-p2a-ctrl";
+					reg = <0x2c 0x4>;
+					status = "disabled";
+				};
+
+				silicon-id@7c {
+					compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id";
+					reg = <0x7c 0x4 0x150 0x8>;
+				};
+
+				pinctrl: pinctrl@80 {
+					compatible = "aspeed,ast2500-pinctrl";
+					reg = <0x80 0x18>, <0xa0 0x10>;
+					aspeed,external-nodes = <&gfx>, <&lhc>;
+				};
+			};
+
+			rng: hwrng@1e6e2078 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2078 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			hace: crypto@1e6e3000 {
+				compatible = "aspeed,ast2500-hace";
+				reg = <0x1e6e3000 0x100>;
+				interrupts = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2500-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_CRT1>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <0x19>;
+			};
+
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2500-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_XDMA>;
+				interrupts-extended = <&vic 6>, <&scu_ic ASPEED_AST2500_SCU_IC_PCIE_RESET_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			adc: adc@1e6e9000 {
+				compatible = "aspeed,ast2500-adc";
+				reg = <0x1e6e9000 0xb0>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2500-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
+			sram: sram@1e720000 {
+				compatible = "mmio-sram";
+				reg = <0x1e720000 0x9000>;	// 36K
+			};
+
+			sdmmc: sd-controller@1e740000 {
+				compatible = "aspeed,ast2500-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@100 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@200 {
+					compatible = "aspeed,ast2500-sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <26>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			gpio: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2500-gpio";
+				reg = <0x1e780000 0x200>;
+				interrupts = <20>;
+				gpio-ranges = <&pinctrl 0 0 232>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpio: sgpio@1e780200 {
+				#gpio-cells = <2>;
+				compatible = "aspeed,ast2500-sgpio";
+				gpio-controller;
+				interrupts = <40>;
+				reg = <0x1e780200 0x0100>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm_default>;
+				status = "disabled";
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2500-rtc";
+				reg = <0x1e781000 0x18>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				/* This timer is a Faraday FTTMR010 derivative */
+				compatible = "aspeed,ast2400-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts = <16 17 18 35 36 37 38 39>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				clock-names = "PCLK";
+			};
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				interrupts = <9>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x20>;
+				reg-shift = <2>;
+				interrupts = <10>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785000 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt2: watchdog@1e785020 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785020 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+			};
+
+			wdt3: watchdog@1e785040 {
+				compatible = "aspeed,ast2500-wdt";
+				reg = <0x1e785040 0x20>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				status = "disabled";
+			};
+
+			pwm_tacho: pwm-tacho-controller@1e786000 {
+				compatible = "aspeed,ast2500-pwm-tacho";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1e786000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_24M>;
+				resets = <&syscon ASPEED_RESET_PWM>;
+				status = "disabled";
+			};
+
+			vuart: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <8>;
+				clocks = <&syscon ASPEED_CLK_APB>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2500-lpc-ctrl";
+					reg = <0x80 0x10>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@90 {
+					compatible = "aspeed,ast2500-lpc-snoop";
+					reg = <0x90 0x8>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2500-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@9c {
+					compatible = "aspeed,ast2500-uart-routing";
+					reg = <0x9c 0x4>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2500-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2500-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <8>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2500-peci";
+				reg = <0x1e78b000 0x60>;
+				interrupts = <15>;
+				clocks = <&syscon ASPEED_CLK_GATE_REFCLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				interrupts = <32>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				interrupts = <33>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				interrupts = <34>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+		};
+	};
+};
+
+&i2c {
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2500-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c1: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x80 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <1>;
+		interrupt-parent = <&i2c_ic>;
+		status = "disabled";
+		/* Does not need pinctrl properties */
+	};
+
+	i2c2: i2c-bus@c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0xc0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <2>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x100 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <3>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@140 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x140 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <4>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x180 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <5>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@1c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x1c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <6>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x300 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <7>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@340 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x340 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <8>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x380 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <9>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@3c0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x3c0 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <10>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x400 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <11>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@440 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x440 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <12>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+
+		reg = <0x480 0x40>;
+		compatible = "aspeed,ast2500-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		bus-frequency = <100000>;
+		interrupts = <13>;
+		interrupt-parent = <&i2c_ic>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+};
+
+&pinctrl {
+	pinctrl_acpi_default: acpi_default {
+		function = "ACPI";
+		groups = "ACPI";
+	};
+
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_ddcclk_default: ddcclk_default {
+		function = "DDCCLK";
+		groups = "DDCCLK";
+	};
+
+	pinctrl_ddcdat_default: ddcdat_default {
+		function = "DDCDAT";
+		groups = "DDCDAT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_fwspics1_default: fwspics1_default {
+		function = "FWSPICS1";
+		groups = "FWSPICS1";
+	};
+
+	pinctrl_fwspics2_default: fwspics2_default {
+		function = "FWSPICS2";
+		groups = "FWSPICS2";
+	};
+
+	pinctrl_gpid0_default: gpid0_default {
+		function = "GPID0";
+		groups = "GPID0";
+	};
+
+	pinctrl_gpid2_default: gpid2_default {
+		function = "GPID2";
+		groups = "GPID2";
+	};
+
+	pinctrl_gpid4_default: gpid4_default {
+		function = "GPID4";
+		groups = "GPID4";
+	};
+
+	pinctrl_gpid6_default: gpid6_default {
+		function = "GPID6";
+		groups = "GPID6";
+	};
+
+	pinctrl_gpie0_default: gpie0_default {
+		function = "GPIE0";
+		groups = "GPIE0";
+	};
+
+	pinctrl_gpie2_default: gpie2_default {
+		function = "GPIE2";
+		groups = "GPIE2";
+	};
+
+	pinctrl_gpie4_default: gpie4_default {
+		function = "GPIE4";
+		groups = "GPIE4";
+	};
+
+	pinctrl_gpie6_default: gpie6_default {
+		function = "GPIE6";
+		groups = "GPIE6";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_lad0_default: lad0_default {
+		function = "LAD0";
+		groups = "LAD0";
+	};
+
+	pinctrl_lad1_default: lad1_default {
+		function = "LAD1";
+		groups = "LAD1";
+	};
+
+	pinctrl_lad2_default: lad2_default {
+		function = "LAD2";
+		groups = "LAD2";
+	};
+
+	pinctrl_lad3_default: lad3_default {
+		function = "LAD3";
+		groups = "LAD3";
+	};
+
+	pinctrl_lclk_default: lclk_default {
+		function = "LCLK";
+		groups = "LCLK";
+	};
+
+	pinctrl_lframe_default: lframe_default {
+		function = "LFRAME";
+		groups = "LFRAME";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcplus_default: lpcplus_default {
+		function = "LPCPLUS";
+		groups = "LPCPLUS";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcrst_default: lpcrst_default {
+		function = "LPCRST";
+		groups = "LPCRST";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_mac1link_default: mac1link_default {
+		function = "MAC1LINK";
+		groups = "MAC1LINK";
+	};
+
+	pinctrl_mac2link_default: mac2link_default {
+		function = "MAC2LINK";
+		groups = "MAC2LINK";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pnor_default: pnor_default {
+		function = "PNOR";
+		groups = "PNOR";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10_default: salt10_default {
+		function = "SALT10";
+		groups = "SALT10";
+	};
+
+	pinctrl_salt11_default: salt11_default {
+		function = "SALT11";
+		groups = "SALT11";
+	};
+
+	pinctrl_salt12_default: salt12_default {
+		function = "SALT12";
+		groups = "SALT12";
+	};
+
+	pinctrl_salt13_default: salt13_default {
+		function = "SALT13";
+		groups = "SALT13";
+	};
+
+	pinctrl_salt14_default: salt14_default {
+		function = "SALT14";
+		groups = "SALT14";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9_default: salt9_default {
+		function = "SALT9";
+		groups = "SALT9";
+	};
+
+	pinctrl_scl1_default: scl1_default {
+		function = "SCL1";
+		groups = "SCL1";
+	};
+
+	pinctrl_scl2_default: scl2_default {
+		function = "SCL2";
+		groups = "SCL2";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_sda1_default: sda1_default {
+		function = "SDA1";
+		groups = "SDA1";
+	};
+
+	pinctrl_sda2_default: sda2_default {
+		function = "SDA2";
+		groups = "SDA2";
+	};
+
+	pinctrl_sgpm_default: sgpm_default {
+		function = "SGPM";
+		groups = "SGPM";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1debug_default: spi1debug_default {
+		function = "SPI1DEBUG";
+		groups = "SPI1DEBUG";
+	};
+
+	pinctrl_spi1passthru_default: spi1passthru_default {
+		function = "SPI1PASSTHRU";
+		groups = "SPI1PASSTHRU";
+	};
+
+	pinctrl_spi2ck_default: spi2ck_default {
+		function = "SPI2CK";
+		groups = "SPI2CK";
+	};
+
+	pinctrl_spi2cs0_default: spi2cs0_default {
+		function = "SPI2CS0";
+		groups = "SPI2CS0";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2miso_default: spi2miso_default {
+		function = "SPI2MISO";
+		groups = "SPI2MISO";
+	};
+
+	pinctrl_spi2mosi_default: spi2mosi_default {
+		function = "SPI2MOSI";
+		groups = "SPI2MOSI";
+	};
+
+	pinctrl_timer3_default: timer3_default {
+		function = "TIMER3";
+		groups = "TIMER3";
+	};
+
+	pinctrl_timer4_default: timer4_default {
+		function = "TIMER4";
+		groups = "TIMER4";
+	};
+
+	pinctrl_timer5_default: timer5_default {
+		function = "TIMER5";
+		groups = "TIMER5";
+	};
+
+	pinctrl_timer6_default: timer6_default {
+		function = "TIMER6";
+		groups = "TIMER6";
+	};
+
+	pinctrl_timer7_default: timer7_default {
+		function = "TIMER7";
+		groups = "TIMER7";
+	};
+
+	pinctrl_timer8_default: timer8_default {
+		function = "TIMER8";
+		groups = "TIMER8";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_usbcki_default: usbcki_default {
+		function = "USBCKI";
+		groups = "USBCKI";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USB2AH";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USB2AD";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USB11BHID";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USB2BH";
+	};
+
+	pinctrl_vgabiosrom_default: vgabiosrom_default {
+		function = "VGABIOSROM";
+		groups = "VGABIOSROM";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_vpi24_default: vpi24_default {
+		function = "VPI24";
+		groups = "VPI24";
+	};
+
+	pinctrl_vpo_default: vpo_default {
+		function = "VPO";
+		groups = "VPO";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
new file mode 100644
index 000000000000..7cd4f075e325
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g6-pinctrl.dtsi
@@ -0,0 +1,1184 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+&pinctrl {
+	pinctrl_adc0_default: adc0_default {
+		function = "ADC0";
+		groups = "ADC0";
+	};
+
+	pinctrl_adc1_default: adc1_default {
+		function = "ADC1";
+		groups = "ADC1";
+	};
+
+	pinctrl_adc10_default: adc10_default {
+		function = "ADC10";
+		groups = "ADC10";
+	};
+
+	pinctrl_adc11_default: adc11_default {
+		function = "ADC11";
+		groups = "ADC11";
+	};
+
+	pinctrl_adc12_default: adc12_default {
+		function = "ADC12";
+		groups = "ADC12";
+	};
+
+	pinctrl_adc13_default: adc13_default {
+		function = "ADC13";
+		groups = "ADC13";
+	};
+
+	pinctrl_adc14_default: adc14_default {
+		function = "ADC14";
+		groups = "ADC14";
+	};
+
+	pinctrl_adc15_default: adc15_default {
+		function = "ADC15";
+		groups = "ADC15";
+	};
+
+	pinctrl_adc2_default: adc2_default {
+		function = "ADC2";
+		groups = "ADC2";
+	};
+
+	pinctrl_adc3_default: adc3_default {
+		function = "ADC3";
+		groups = "ADC3";
+	};
+
+	pinctrl_adc4_default: adc4_default {
+		function = "ADC4";
+		groups = "ADC4";
+	};
+
+	pinctrl_adc5_default: adc5_default {
+		function = "ADC5";
+		groups = "ADC5";
+	};
+
+	pinctrl_adc6_default: adc6_default {
+		function = "ADC6";
+		groups = "ADC6";
+	};
+
+	pinctrl_adc7_default: adc7_default {
+		function = "ADC7";
+		groups = "ADC7";
+	};
+
+	pinctrl_adc8_default: adc8_default {
+		function = "ADC8";
+		groups = "ADC8";
+	};
+
+	pinctrl_adc9_default: adc9_default {
+		function = "ADC9";
+		groups = "ADC9";
+	};
+
+	pinctrl_bmcint_default: bmcint_default {
+		function = "BMCINT";
+		groups = "BMCINT";
+	};
+
+	pinctrl_espi_default: espi_default {
+		function = "ESPI";
+		groups = "ESPI";
+	};
+
+	pinctrl_espialt_default: espialt_default {
+		function = "ESPIALT";
+		groups = "ESPIALT";
+	};
+
+	pinctrl_fsi1_default: fsi1_default {
+		function = "FSI1";
+		groups = "FSI1";
+	};
+
+	pinctrl_fsi2_default: fsi2_default {
+		function = "FSI2";
+		groups = "FSI2";
+	};
+
+	pinctrl_fwspiabr_default: fwspiabr_default {
+		function = "FWSPIABR";
+		groups = "FWSPIABR";
+	};
+
+	pinctrl_fwspid_default: fwspid_default {
+		function = "FWSPID";
+		groups = "FWSPID";
+	};
+
+	pinctrl_fwqspi_default: fwqspi_default {
+		function = "FWQSPI";
+		groups = "FWQSPI";
+	};
+
+	pinctrl_fwspiwp_default: fwspiwp_default {
+		function = "FWSPIWP";
+		groups = "FWSPIWP";
+	};
+
+	pinctrl_gpit0_default: gpit0_default {
+		function = "GPIT0";
+		groups = "GPIT0";
+	};
+
+	pinctrl_gpit1_default: gpit1_default {
+		function = "GPIT1";
+		groups = "GPIT1";
+	};
+
+	pinctrl_gpit2_default: gpit2_default {
+		function = "GPIT2";
+		groups = "GPIT2";
+	};
+
+	pinctrl_gpit3_default: gpit3_default {
+		function = "GPIT3";
+		groups = "GPIT3";
+	};
+
+	pinctrl_gpit4_default: gpit4_default {
+		function = "GPIT4";
+		groups = "GPIT4";
+	};
+
+	pinctrl_gpit5_default: gpit5_default {
+		function = "GPIT5";
+		groups = "GPIT5";
+	};
+
+	pinctrl_gpit6_default: gpit6_default {
+		function = "GPIT6";
+		groups = "GPIT6";
+	};
+
+	pinctrl_gpit7_default: gpit7_default {
+		function = "GPIT7";
+		groups = "GPIT7";
+	};
+
+	pinctrl_gpiu0_default: gpiu0_default {
+		function = "GPIU0";
+		groups = "GPIU0";
+	};
+
+	pinctrl_gpiu1_default: gpiu1_default {
+		function = "GPIU1";
+		groups = "GPIU1";
+	};
+
+	pinctrl_gpiu2_default: gpiu2_default {
+		function = "GPIU2";
+		groups = "GPIU2";
+	};
+
+	pinctrl_gpiu3_default: gpiu3_default {
+		function = "GPIU3";
+		groups = "GPIU3";
+	};
+
+	pinctrl_gpiu4_default: gpiu4_default {
+		function = "GPIU4";
+		groups = "GPIU4";
+	};
+
+	pinctrl_gpiu5_default: gpiu5_default {
+		function = "GPIU5";
+		groups = "GPIU5";
+	};
+
+	pinctrl_gpiu6_default: gpiu6_default {
+		function = "GPIU6";
+		groups = "GPIU6";
+	};
+
+	pinctrl_gpiu7_default: gpiu7_default {
+		function = "GPIU7";
+		groups = "GPIU7";
+	};
+
+	pinctrl_hvi3c3_default: hvi3c3_default {
+		function = "I3C3";
+		groups = "HVI3C3";
+	};
+
+	pinctrl_hvi3c4_default: hvi3c4_default {
+		function = "I3C4";
+		groups = "HVI3C4";
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		function = "I2C1";
+		groups = "I2C1";
+	};
+
+	pinctrl_i2c10_default: i2c10_default {
+		function = "I2C10";
+		groups = "I2C10";
+	};
+
+	pinctrl_i2c11_default: i2c11_default {
+		function = "I2C11";
+		groups = "I2C11";
+	};
+
+	pinctrl_i2c12_default: i2c12_default {
+		function = "I2C12";
+		groups = "I2C12";
+	};
+
+	pinctrl_i2c13_default: i2c13_default {
+		function = "I2C13";
+		groups = "I2C13";
+	};
+
+	pinctrl_i2c14_default: i2c14_default {
+		function = "I2C14";
+		groups = "I2C14";
+	};
+
+	pinctrl_i2c15_default: i2c15_default {
+		function = "I2C15";
+		groups = "I2C15";
+	};
+
+	pinctrl_i2c16_default: i2c16_default {
+		function = "I2C16";
+		groups = "I2C16";
+	};
+
+	pinctrl_i2c2_default: i2c2_default {
+		function = "I2C2";
+		groups = "I2C2";
+	};
+
+	pinctrl_i2c3_default: i2c3_default {
+		function = "I2C3";
+		groups = "I2C3";
+	};
+
+	pinctrl_i2c4_default: i2c4_default {
+		function = "I2C4";
+		groups = "I2C4";
+	};
+
+	pinctrl_i2c5_default: i2c5_default {
+		function = "I2C5";
+		groups = "I2C5";
+	};
+
+	pinctrl_i2c6_default: i2c6_default {
+		function = "I2C6";
+		groups = "I2C6";
+	};
+
+	pinctrl_i2c7_default: i2c7_default {
+		function = "I2C7";
+		groups = "I2C7";
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		function = "I2C8";
+		groups = "I2C8";
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		function = "I2C9";
+		groups = "I2C9";
+	};
+
+	pinctrl_i3c3_default: i3c3_default {
+		function = "I3C3";
+		groups = "I3C3";
+	};
+
+	pinctrl_i3c4_default: i3c4_default {
+		function = "I3C4";
+		groups = "I3C4";
+	};
+
+	pinctrl_i3c5_default: i3c5_default {
+		function = "I3C5";
+		groups = "I3C5";
+	};
+
+	pinctrl_i3c6_default: i3c6_default {
+		function = "I3C6";
+		groups = "I3C6";
+	};
+
+	pinctrl_jtagm_default: jtagm_default {
+		function = "JTAGM";
+		groups = "JTAGM";
+	};
+
+	pinctrl_lhpd_default: lhpd_default {
+		function = "LHPD";
+		groups = "LHPD";
+	};
+
+	pinctrl_lhsirq_default: lhsirq_default {
+		function = "LHSIRQ";
+		groups = "LHSIRQ";
+	};
+
+	pinctrl_lpc_default: lpc_default {
+		function = "LPC";
+		groups = "LPC";
+	};
+
+	pinctrl_lpchc_default: lpchc_default {
+		function = "LPCHC";
+		groups = "LPCHC";
+	};
+
+	pinctrl_lpcpd_default: lpcpd_default {
+		function = "LPCPD";
+		groups = "LPCPD";
+	};
+
+	pinctrl_lpcpme_default: lpcpme_default {
+		function = "LPCPME";
+		groups = "LPCPME";
+	};
+
+	pinctrl_lpcsmi_default: lpcsmi_default {
+		function = "LPCSMI";
+		groups = "LPCSMI";
+	};
+
+	pinctrl_lsirq_default: lsirq_default {
+		function = "LSIRQ";
+		groups = "LSIRQ";
+	};
+
+	pinctrl_maclink1_default: maclink1_default {
+		function = "MACLINK1";
+		groups = "MACLINK1";
+	};
+
+	pinctrl_maclink2_default: maclink2_default {
+		function = "MACLINK2";
+		groups = "MACLINK2";
+	};
+
+	pinctrl_maclink3_default: maclink3_default {
+		function = "MACLINK3";
+		groups = "MACLINK3";
+	};
+
+	pinctrl_maclink4_default: maclink4_default {
+		function = "MACLINK4";
+		groups = "MACLINK4";
+	};
+
+	pinctrl_mdio1_default: mdio1_default {
+		function = "MDIO1";
+		groups = "MDIO1";
+	};
+
+	pinctrl_mdio2_default: mdio2_default {
+		function = "MDIO2";
+		groups = "MDIO2";
+	};
+
+	pinctrl_mdio3_default: mdio3_default {
+		function = "MDIO3";
+		groups = "MDIO3";
+	};
+
+	pinctrl_mdio4_default: mdio4_default {
+		function = "MDIO4";
+		groups = "MDIO4";
+	};
+
+	pinctrl_ncts1_default: ncts1_default {
+		function = "NCTS1";
+		groups = "NCTS1";
+	};
+
+	pinctrl_ncts2_default: ncts2_default {
+		function = "NCTS2";
+		groups = "NCTS2";
+	};
+
+	pinctrl_ncts3_default: ncts3_default {
+		function = "NCTS3";
+		groups = "NCTS3";
+	};
+
+	pinctrl_ncts4_default: ncts4_default {
+		function = "NCTS4";
+		groups = "NCTS4";
+	};
+
+	pinctrl_ndcd1_default: ndcd1_default {
+		function = "NDCD1";
+		groups = "NDCD1";
+	};
+
+	pinctrl_ndcd2_default: ndcd2_default {
+		function = "NDCD2";
+		groups = "NDCD2";
+	};
+
+	pinctrl_ndcd3_default: ndcd3_default {
+		function = "NDCD3";
+		groups = "NDCD3";
+	};
+
+	pinctrl_ndcd4_default: ndcd4_default {
+		function = "NDCD4";
+		groups = "NDCD4";
+	};
+
+	pinctrl_ndsr1_default: ndsr1_default {
+		function = "NDSR1";
+		groups = "NDSR1";
+	};
+
+	pinctrl_ndsr2_default: ndsr2_default {
+		function = "NDSR2";
+		groups = "NDSR2";
+	};
+
+	pinctrl_ndsr3_default: ndsr3_default {
+		function = "NDSR3";
+		groups = "NDSR3";
+	};
+
+	pinctrl_ndsr4_default: ndsr4_default {
+		function = "NDSR4";
+		groups = "NDSR4";
+	};
+
+	pinctrl_ndtr1_default: ndtr1_default {
+		function = "NDTR1";
+		groups = "NDTR1";
+	};
+
+	pinctrl_ndtr2_default: ndtr2_default {
+		function = "NDTR2";
+		groups = "NDTR2";
+	};
+
+	pinctrl_ndtr3_default: ndtr3_default {
+		function = "NDTR3";
+		groups = "NDTR3";
+	};
+
+	pinctrl_ndtr4_default: ndtr4_default {
+		function = "NDTR4";
+		groups = "NDTR4";
+	};
+
+	pinctrl_nri1_default: nri1_default {
+		function = "NRI1";
+		groups = "NRI1";
+	};
+
+	pinctrl_nri2_default: nri2_default {
+		function = "NRI2";
+		groups = "NRI2";
+	};
+
+	pinctrl_nri3_default: nri3_default {
+		function = "NRI3";
+		groups = "NRI3";
+	};
+
+	pinctrl_nri4_default: nri4_default {
+		function = "NRI4";
+		groups = "NRI4";
+	};
+
+	pinctrl_nrts1_default: nrts1_default {
+		function = "NRTS1";
+		groups = "NRTS1";
+	};
+
+	pinctrl_nrts2_default: nrts2_default {
+		function = "NRTS2";
+		groups = "NRTS2";
+	};
+
+	pinctrl_nrts3_default: nrts3_default {
+		function = "NRTS3";
+		groups = "NRTS3";
+	};
+
+	pinctrl_nrts4_default: nrts4_default {
+		function = "NRTS4";
+		groups = "NRTS4";
+	};
+
+	pinctrl_oscclk_default: oscclk_default {
+		function = "OSCCLK";
+		groups = "OSCCLK";
+	};
+
+	pinctrl_pewake_default: pewake_default {
+		function = "PEWAKE";
+		groups = "PEWAKE";
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		function = "PWM0";
+		groups = "PWM0";
+	};
+
+	pinctrl_pwm1_default: pwm1_default {
+		function = "PWM1";
+		groups = "PWM1";
+	};
+
+	pinctrl_pwm10g0_default: pwm10g0_default {
+		function = "PWM10";
+		groups = "PWM10G0";
+	};
+
+	pinctrl_pwm10g1_default: pwm10g1_default {
+		function = "PWM10";
+		groups = "PWM10G1";
+	};
+
+	pinctrl_pwm11g0_default: pwm11g0_default {
+		function = "PWM11";
+		groups = "PWM11G0";
+	};
+
+	pinctrl_pwm11g1_default: pwm11g1_default {
+		function = "PWM11";
+		groups = "PWM11G1";
+	};
+
+	pinctrl_pwm12g0_default: pwm12g0_default {
+		function = "PWM12";
+		groups = "PWM12G0";
+	};
+
+	pinctrl_pwm12g1_default: pwm12g1_default {
+		function = "PWM12";
+		groups = "PWM12G1";
+	};
+
+	pinctrl_pwm13g0_default: pwm13g0_default {
+		function = "PWM13";
+		groups = "PWM13G0";
+	};
+
+	pinctrl_pwm13g1_default: pwm13g1_default {
+		function = "PWM13";
+		groups = "PWM13G1";
+	};
+
+	pinctrl_pwm14g0_default: pwm14g0_default {
+		function = "PWM14";
+		groups = "PWM14G0";
+	};
+
+	pinctrl_pwm14g1_default: pwm14g1_default {
+		function = "PWM14";
+		groups = "PWM14G1";
+	};
+
+	pinctrl_pwm15g0_default: pwm15g0_default {
+		function = "PWM15";
+		groups = "PWM15G0";
+	};
+
+	pinctrl_pwm15g1_default: pwm15g1_default {
+		function = "PWM15";
+		groups = "PWM15G1";
+	};
+
+	pinctrl_pwm2_default: pwm2_default {
+		function = "PWM2";
+		groups = "PWM2";
+	};
+
+	pinctrl_pwm3_default: pwm3_default {
+		function = "PWM3";
+		groups = "PWM3";
+	};
+
+	pinctrl_pwm4_default: pwm4_default {
+		function = "PWM4";
+		groups = "PWM4";
+	};
+
+	pinctrl_pwm5_default: pwm5_default {
+		function = "PWM5";
+		groups = "PWM5";
+	};
+
+	pinctrl_pwm6_default: pwm6_default {
+		function = "PWM6";
+		groups = "PWM6";
+	};
+
+	pinctrl_pwm7_default: pwm7_default {
+		function = "PWM7";
+		groups = "PWM7";
+	};
+
+	pinctrl_pwm8g0_default: pwm8g0_default {
+		function = "PWM8";
+		groups = "PWM8G0";
+	};
+
+	pinctrl_pwm8g1_default: pwm8g1_default {
+		function = "PWM8";
+		groups = "PWM8G1";
+	};
+
+	pinctrl_pwm9g0_default: pwm9g0_default {
+		function = "PWM9";
+		groups = "PWM9G0";
+	};
+
+	pinctrl_pwm9g1_default: pwm9g1_default {
+		function = "PWM9";
+		groups = "PWM9G1";
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		function = "SPI1";
+		groups = "QSPI1";
+	};
+
+	pinctrl_qspi2_default: qspi2_default {
+		function = "SPI2";
+		groups = "QSPI2";
+	};
+
+	pinctrl_rgmii1_default: rgmii1_default {
+		function = "RGMII1";
+		groups = "RGMII1";
+	};
+
+	pinctrl_rgmii2_default: rgmii2_default {
+		function = "RGMII2";
+		groups = "RGMII2";
+	};
+
+	pinctrl_rgmii3_default: rgmii3_default {
+		function = "RGMII3";
+		groups = "RGMII3";
+	};
+
+	pinctrl_rgmii4_default: rgmii4_default {
+		function = "RGMII4";
+		groups = "RGMII4";
+	};
+
+	pinctrl_rmii1_default: rmii1_default {
+		function = "RMII1";
+		groups = "RMII1";
+	};
+
+	pinctrl_rmii2_default: rmii2_default {
+		function = "RMII2";
+		groups = "RMII2";
+	};
+
+	pinctrl_rmii3_default: rmii3_default {
+		function = "RMII3";
+		groups = "RMII3";
+	};
+
+	pinctrl_rmii4_default: rmii4_default {
+		function = "RMII4";
+		groups = "RMII4";
+	};
+
+	pinctrl_rxd1_default: rxd1_default {
+		function = "RXD1";
+		groups = "RXD1";
+	};
+
+	pinctrl_rxd2_default: rxd2_default {
+		function = "RXD2";
+		groups = "RXD2";
+	};
+
+	pinctrl_rxd3_default: rxd3_default {
+		function = "RXD3";
+		groups = "RXD3";
+	};
+
+	pinctrl_rxd4_default: rxd4_default {
+		function = "RXD4";
+		groups = "RXD4";
+	};
+
+	pinctrl_salt1_default: salt1_default {
+		function = "SALT1";
+		groups = "SALT1";
+	};
+
+	pinctrl_salt10g0_default: salt10g0_default {
+		function = "SALT10";
+		groups = "SALT10G0";
+	};
+
+	pinctrl_salt10g1_default: salt10g1_default {
+		function = "SALT10";
+		groups = "SALT10G1";
+	};
+
+	pinctrl_salt11g0_default: salt11g0_default {
+		function = "SALT11";
+		groups = "SALT11G0";
+	};
+
+	pinctrl_salt11g1_default: salt11g1_default {
+		function = "SALT11";
+		groups = "SALT11G1";
+	};
+
+	pinctrl_salt12g0_default: salt12g0_default {
+		function = "SALT12";
+		groups = "SALT12G0";
+	};
+
+	pinctrl_salt12g1_default: salt12g1_default {
+		function = "SALT12";
+		groups = "SALT12G1";
+	};
+
+	pinctrl_salt13g0_default: salt13g0_default {
+		function = "SALT13";
+		groups = "SALT13G0";
+	};
+
+	pinctrl_salt13g1_default: salt13g1_default {
+		function = "SALT13";
+		groups = "SALT13G1";
+	};
+
+	pinctrl_salt14g0_default: salt14g0_default {
+		function = "SALT14";
+		groups = "SALT14G0";
+	};
+
+	pinctrl_salt14g1_default: salt14g1_default {
+		function = "SALT14";
+		groups = "SALT14G1";
+	};
+
+	pinctrl_salt15g0_default: salt15g0_default {
+		function = "SALT15";
+		groups = "SALT15G0";
+	};
+
+	pinctrl_salt15g1_default: salt15g1_default {
+		function = "SALT15";
+		groups = "SALT15G1";
+	};
+
+	pinctrl_salt16g0_default: salt16g0_default {
+		function = "SALT16";
+		groups = "SALT16G0";
+	};
+
+	pinctrl_salt16g1_default: salt16g1_default {
+		function = "SALT16";
+		groups = "SALT16G1";
+	};
+
+	pinctrl_salt2_default: salt2_default {
+		function = "SALT2";
+		groups = "SALT2";
+	};
+
+	pinctrl_salt3_default: salt3_default {
+		function = "SALT3";
+		groups = "SALT3";
+	};
+
+	pinctrl_salt4_default: salt4_default {
+		function = "SALT4";
+		groups = "SALT4";
+	};
+
+	pinctrl_salt5_default: salt5_default {
+		function = "SALT5";
+		groups = "SALT5";
+	};
+
+	pinctrl_salt6_default: salt6_default {
+		function = "SALT6";
+		groups = "SALT6";
+	};
+
+	pinctrl_salt7_default: salt7_default {
+		function = "SALT7";
+		groups = "SALT7";
+	};
+
+	pinctrl_salt8_default: salt8_default {
+		function = "SALT8";
+		groups = "SALT8";
+	};
+
+	pinctrl_salt9g0_default: salt9g0_default {
+		function = "SALT9";
+		groups = "SALT9G0";
+	};
+
+	pinctrl_salt9g1_default: salt9g1_default {
+		function = "SALT9";
+		groups = "SALT9G1";
+	};
+
+	pinctrl_sd1_default: sd1_default {
+		function = "SD1";
+		groups = "SD1";
+	};
+
+	pinctrl_sd2_default: sd2_default {
+		function = "SD2";
+		groups = "SD2";
+	};
+
+	pinctrl_emmc_default: emmc_default {
+		function = "EMMC";
+		groups = "EMMCG4";
+	};
+
+	pinctrl_sgpm1_default: sgpm1_default {
+		function = "SGPM1";
+		groups = "SGPM1";
+	};
+
+	pinctrl_sgpm2_default: sgpm2_default {
+		function = "SGPM2";
+		groups = "SGPM2";
+	};
+
+	pinctrl_sgps1_default: sgps1_default {
+		function = "SGPS1";
+		groups = "SGPS1";
+	};
+
+	pinctrl_sgps2_default: sgps2_default {
+		function = "SGPS2";
+		groups = "SGPS2";
+	};
+
+	pinctrl_sioonctrl_default: sioonctrl_default {
+		function = "SIOONCTRL";
+		groups = "SIOONCTRL";
+	};
+
+	pinctrl_siopbi_default: siopbi_default {
+		function = "SIOPBI";
+		groups = "SIOPBI";
+	};
+
+	pinctrl_siopbo_default: siopbo_default {
+		function = "SIOPBO";
+		groups = "SIOPBO";
+	};
+
+	pinctrl_siopwreq_default: siopwreq_default {
+		function = "SIOPWREQ";
+		groups = "SIOPWREQ";
+	};
+
+	pinctrl_siopwrgd_default: siopwrgd_default {
+		function = "SIOPWRGD";
+		groups = "SIOPWRGD";
+	};
+
+	pinctrl_sios3_default: sios3_default {
+		function = "SIOS3";
+		groups = "SIOS3";
+	};
+
+	pinctrl_sios5_default: sios5_default {
+		function = "SIOS5";
+		groups = "SIOS5";
+	};
+
+	pinctrl_siosci_default: siosci_default {
+		function = "SIOSCI";
+		groups = "SIOSCI";
+	};
+
+	pinctrl_spi1_default: spi1_default {
+		function = "SPI1";
+		groups = "SPI1";
+	};
+
+	pinctrl_spi1abr_default: spi1abr_default {
+		function = "SPI1ABR";
+		groups = "SPI1ABR";
+	};
+
+	pinctrl_spi1cs1_default: spi1cs1_default {
+		function = "SPI1CS1";
+		groups = "SPI1CS1";
+	};
+
+	pinctrl_spi1wp_default: spi1wp_default {
+		function = "SPI1WP";
+		groups = "SPI1WP";
+	};
+
+	pinctrl_spi2_default: spi2_default {
+		function = "SPI2";
+		groups = "SPI2";
+	};
+
+	pinctrl_spi2cs1_default: spi2cs1_default {
+		function = "SPI2CS1";
+		groups = "SPI2CS1";
+	};
+
+	pinctrl_spi2cs2_default: spi2cs2_default {
+		function = "SPI2CS2";
+		groups = "SPI2CS2";
+	};
+
+	pinctrl_tach0_default: tach0_default {
+		function = "TACH0";
+		groups = "TACH0";
+	};
+
+	pinctrl_tach1_default: tach1_default {
+		function = "TACH1";
+		groups = "TACH1";
+	};
+
+	pinctrl_tach10_default: tach10_default {
+		function = "TACH10";
+		groups = "TACH10";
+	};
+
+	pinctrl_tach11_default: tach11_default {
+		function = "TACH11";
+		groups = "TACH11";
+	};
+
+	pinctrl_tach12_default: tach12_default {
+		function = "TACH12";
+		groups = "TACH12";
+	};
+
+	pinctrl_tach13_default: tach13_default {
+		function = "TACH13";
+		groups = "TACH13";
+	};
+
+	pinctrl_tach14_default: tach14_default {
+		function = "TACH14";
+		groups = "TACH14";
+	};
+
+	pinctrl_tach15_default: tach15_default {
+		function = "TACH15";
+		groups = "TACH15";
+	};
+
+	pinctrl_tach2_default: tach2_default {
+		function = "TACH2";
+		groups = "TACH2";
+	};
+
+	pinctrl_tach3_default: tach3_default {
+		function = "TACH3";
+		groups = "TACH3";
+	};
+
+	pinctrl_tach4_default: tach4_default {
+		function = "TACH4";
+		groups = "TACH4";
+	};
+
+	pinctrl_tach5_default: tach5_default {
+		function = "TACH5";
+		groups = "TACH5";
+	};
+
+	pinctrl_tach6_default: tach6_default {
+		function = "TACH6";
+		groups = "TACH6";
+	};
+
+	pinctrl_tach7_default: tach7_default {
+		function = "TACH7";
+		groups = "TACH7";
+	};
+
+	pinctrl_tach8_default: tach8_default {
+		function = "TACH8";
+		groups = "TACH8";
+	};
+
+	pinctrl_tach9_default: tach9_default {
+		function = "TACH9";
+		groups = "TACH9";
+	};
+
+	pinctrl_thru0_default: thru0_default {
+		function = "THRU0";
+		groups = "THRU0";
+	};
+
+	pinctrl_thru1_default: thru1_default {
+		function = "THRU1";
+		groups = "THRU1";
+	};
+
+	pinctrl_thru2_default: thru2_default {
+		function = "THRU2";
+		groups = "THRU2";
+	};
+
+	pinctrl_thru3_default: thru3_default {
+		function = "THRU3";
+		groups = "THRU3";
+	};
+
+	pinctrl_txd1_default: txd1_default {
+		function = "TXD1";
+		groups = "TXD1";
+	};
+
+	pinctrl_txd2_default: txd2_default {
+		function = "TXD2";
+		groups = "TXD2";
+	};
+
+	pinctrl_txd3_default: txd3_default {
+		function = "TXD3";
+		groups = "TXD3";
+	};
+
+	pinctrl_txd4_default: txd4_default {
+		function = "TXD4";
+		groups = "TXD4";
+	};
+
+	pinctrl_uart10_default: uart10_default {
+		function = "UART10";
+		groups = "UART10";
+	};
+
+	pinctrl_uart11_default: uart11_default {
+		function = "UART11";
+		groups = "UART11";
+	};
+
+	pinctrl_uart12g0_default: uart12g0_default {
+		function = "UART12";
+		groups = "UART12G0";
+	};
+
+	pinctrl_uart12g1_default: uart12g1_default {
+		function = "UART12";
+		groups = "UART12G1";
+	};
+
+	pinctrl_uart13g0_default: uart13g0_default {
+		function = "UART13";
+		groups = "UART13G0";
+	};
+
+	pinctrl_uart13g1_default: uart13g1_default {
+		function = "UART13";
+		groups = "UART13G1";
+	};
+
+	pinctrl_uart6_default: uart6_default {
+		function = "UART6";
+		groups = "UART6";
+	};
+
+	pinctrl_uart7_default: uart7_default {
+		function = "UART7";
+		groups = "UART7";
+	};
+
+	pinctrl_uart8_default: uart8_default {
+		function = "UART8";
+		groups = "UART8";
+	};
+
+	pinctrl_uart9_default: uart9_default {
+		function = "UART9";
+		groups = "UART9";
+	};
+
+	pinctrl_usb2ah_default: usb2ah_default {
+		function = "USB2AH";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2ad_default: usb2ad_default {
+		function = "USB2AD";
+		groups = "USBA";
+	};
+
+	pinctrl_usb2bh_default: usb2bh_default {
+		function = "USB2BH";
+		groups = "USBB";
+	};
+
+	pinctrl_usb2bd_default: usb2bd_default {
+		function = "USB2BD";
+		groups = "USBB";
+	};
+
+	pinctrl_usb11bhid_default: usb11bhid_default {
+		function = "USB11BHID";
+		groups = "USBB";
+	};
+
+	pinctrl_vb_default: vb_default {
+		function = "VB";
+		groups = "VB";
+	};
+
+	pinctrl_vgahs_default: vgahs_default {
+		function = "VGAHS";
+		groups = "VGAHS";
+	};
+
+	pinctrl_vgavs_default: vgavs_default {
+		function = "VGAVS";
+		groups = "VGAVS";
+	};
+
+	pinctrl_wdtrst1_default: wdtrst1_default {
+		function = "WDTRST1";
+		groups = "WDTRST1";
+	};
+
+	pinctrl_wdtrst2_default: wdtrst2_default {
+		function = "WDTRST2";
+		groups = "WDTRST2";
+	};
+
+	pinctrl_wdtrst3_default: wdtrst3_default {
+		function = "WDTRST3";
+		groups = "WDTRST3";
+	};
+
+	pinctrl_wdtrst4_default: wdtrst4_default {
+		function = "WDTRST4";
+		groups = "WDTRST4";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
new file mode 100644
index 000000000000..172dd748d807
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -0,0 +1,1121 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright 2019 IBM Corp.
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+#include <dt-bindings/clock/ast2600-clock.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2600";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		i2c7 = &i2c7;
+		i2c8 = &i2c8;
+		i2c9 = &i2c9;
+		i2c10 = &i2c10;
+		i2c11 = &i2c11;
+		i2c12 = &i2c12;
+		i2c13 = &i2c13;
+		i2c14 = &i2c14;
+		i2c15 = &i2c15;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &vuart1;
+		serial6 = &vuart2;
+		mdio0 = &mdio0;
+		mdio1 = &mdio1;
+		mdio2 = &mdio2;
+		mdio3 = &mdio3;
+	};
+
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "aspeed,ast2600-smp";
+
+		cpu@f00 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf00>;
+		};
+
+		cpu@f01 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0xf01>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clocks = <&syscon ASPEED_CLK_HPLL>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+	};
+
+	edac: sdram@1e6e0000 {
+		compatible = "aspeed,ast2600-sdram-edac", "syscon";
+		reg = <0x1e6e0000 0x174>;
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		ranges;
+
+		gic: interrupt-controller@40461000 {
+			compatible = "arm,cortex-a7-gic";
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupt-parent = <&gic>;
+			reg = <0x40461000 0x1000>,
+			    <0x40462000 0x1000>,
+			    <0x40464000 0x2000>,
+			    <0x40466000 0x2000>;
+			};
+
+		ahbc: bus@1e600000 {
+			compatible = "aspeed,ast2600-ahbc", "syscon";
+			reg = <0x1e600000 0x100>;
+		};
+
+		fmc: spi@1e620000 {
+			reg = <0x1e620000 0xc4>, <0x20000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-fmc";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi1: spi@1e630000 {
+			reg = <0x1e630000 0xc4>, <0x30000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		spi2: spi@1e631000 {
+			reg = <0x1e631000 0xc4>, <0x50000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "aspeed,ast2600-spi";
+			clocks = <&syscon ASPEED_CLK_AHB>;
+			status = "disabled";
+			flash@0 {
+				reg = < 0 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@1 {
+				reg = < 1 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+			flash@2 {
+				reg = < 2 >;
+				compatible = "jedec,spi-nor";
+				spi-max-frequency = <50000000>;
+				spi-rx-bus-width = <2>;
+				status = "disabled";
+			};
+		};
+
+		mdio0: mdio@1e650000 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650000 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio1_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio1: mdio@1e650008 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650008 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio2_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio2: mdio@1e650010 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650010 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio3_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mdio3: mdio@1e650018 {
+			compatible = "aspeed,ast2600-mdio";
+			reg = <0x1e650018 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_mdio4_default>;
+			resets = <&syscon ASPEED_RESET_MII>;
+		};
+
+		mac0: ftgmac@1e660000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e660000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>;
+			status = "disabled";
+		};
+
+		mac1: ftgmac@1e680000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e680000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>;
+			status = "disabled";
+		};
+
+		mac2: ftgmac@1e670000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e670000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>;
+			status = "disabled";
+		};
+
+		mac3: ftgmac@1e690000 {
+			compatible = "aspeed,ast2600-mac", "faraday,ftgmac100";
+			reg = <0x1e690000 0x180>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>;
+			status = "disabled";
+		};
+
+		ehci0: usb@1e6a1000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a1000 0x100>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ah_default>;
+			status = "disabled";
+		};
+
+		ehci1: usb@1e6a3000 {
+			compatible = "aspeed,ast2600-ehci", "generic-ehci";
+			reg = <0x1e6a3000 0x100>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bh_default>;
+			status = "disabled";
+		};
+
+		uhci: usb@1e6b0000 {
+			compatible = "aspeed,ast2600-uhci", "generic-uhci";
+			reg = <0x1e6b0000 0x100>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			#ports = <2>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
+			status = "disabled";
+			/*
+			 * No default pinmux, it will follow EHCI, use an
+			 * explicit pinmux override if EHCI is not enabled.
+			 */
+		};
+
+		vhub: usb-vhub@1e6a0000 {
+			compatible = "aspeed,ast2600-usb-vhub";
+			reg = <0x1e6a0000 0x350>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+			aspeed,vhub-downstream-ports = <7>;
+			aspeed,vhub-generic-endpoints = <21>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2ad_default>;
+			status = "disabled";
+		};
+
+		udc: usb@1e6a2000 {
+			compatible = "aspeed,ast2600-udc";
+			reg = <0x1e6a2000 0x300>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb2bd_default>;
+			status = "disabled";
+		};
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			hace: crypto@1e6d0000 {
+				compatible = "aspeed,ast2600-hace";
+				reg = <0x1e6d0000 0x200>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_YCLK>;
+				resets = <&syscon ASPEED_RESET_HACE>;
+			};
+
+			syscon: syscon@1e6e2000 {
+				compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
+				reg = <0x1e6e2000 0x1000>;
+				ranges = <0 0x1e6e2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#clock-cells = <1>;
+				#reset-cells = <1>;
+
+				pinctrl: pinctrl {
+					compatible = "aspeed,ast2600-pinctrl";
+				};
+
+				silicon-id@14 {
+					compatible = "aspeed,ast2600-silicon-id", "aspeed,silicon-id";
+					reg = <0x14 0x4 0x5b0 0x8>;
+				};
+
+				smp-memram@180 {
+					compatible = "aspeed,ast2600-smpmem";
+					reg = <0x180 0x40>;
+				};
+
+				scu_ic0: interrupt-controller@560 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic0";
+					reg = <0x560 0x4>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@570 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic1";
+					reg = <0x570 0x4>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+			};
+
+			rng: hwrng@1e6e2524 {
+				compatible = "timeriomem_rng";
+				reg = <0x1e6e2524 0x4>;
+				period = <1>;
+				quality = <100>;
+			};
+
+			gfx: display@1e6e6000 {
+				compatible = "aspeed,ast2600-gfx", "syscon";
+				reg = <0x1e6e6000 0x1000>;
+				reg-io-width = <4>;
+				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
+				resets = <&syscon ASPEED_RESET_GRAPHICS>;
+				syscon = <&syscon>;
+				status = "disabled";
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2600-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
+				reset-names = "device", "root-complex";
+				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+						      <&scu_ic0 ASPEED_AST2600_SCU_IC0_PCIE_PERST_LO_TO_HI>;
+				aspeed,pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			adc0: adc@1e6e9000 {
+				compatible = "aspeed,ast2600-adc0";
+				reg = <0x1e6e9000 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			adc1: adc@1e6e9100 {
+				compatible = "aspeed,ast2600-adc1";
+				reg = <0x1e6e9100 0x100>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				resets = <&syscon ASPEED_RESET_ADC>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+
+			sbc: secure-boot-controller@1e6f2000 {
+				compatible = "aspeed,ast2600-sbc";
+				reg = <0x1e6f2000 0x1000>;
+			};
+
+			acry: crypto@1e6fa000 {
+				compatible = "aspeed,ast2600-acry";
+				reg = <0x1e6fa000 0x400>, <0x1e710000 0x1800>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_RSACLK>;
+				aspeed,ahbc = <&ahbc>;
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			gpio0: gpio@1e780000 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780000 0x400>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 0 208>;
+				ngpios = <208>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sgpiom0: sgpiom@1e780500 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780500 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm1_default>;
+				status = "disabled";
+			};
+
+			sgpiom1: sgpiom@1e780600 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-sgpiom";
+				reg = <0x1e780600 0x100>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB2>;
+				interrupt-controller;
+				bus-frequency = <12000000>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_sgpm2_default>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@1e780800 {
+				#gpio-cells = <2>;
+				gpio-controller;
+				compatible = "aspeed,ast2600-gpio";
+				reg = <0x1e780800 0x800>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-ranges = <&pinctrl 0 208 36>;
+				ngpios = <36>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rtc: rtc@1e781000 {
+				compatible = "aspeed,ast2600-rtc";
+				reg = <0x1e781000 0x18>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
+			timer: timer@1e782000 {
+				compatible = "aspeed,ast2600-timer";
+				reg = <0x1e782000 0x90>;
+				interrupts-extended = <&gic  GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				clock-names = "PCLK";
+				status = "disabled";
+                        };
+
+			uart1: serial@1e783000 {
+				compatible = "ns16550a";
+				reg = <0x1e783000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART1CLK>;
+				resets = <&lpc_reset 4>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd1_default &pinctrl_rxd1_default>;
+				status = "disabled";
+			};
+
+			uart5: serial@1e784000 {
+				compatible = "ns16550a";
+				reg = <0x1e784000 0x1000>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART5CLK>;
+				no-loopback-test;
+			};
+
+			wdt1: watchdog@1e785000 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785000 0x40>;
+			};
+
+			wdt2: watchdog@1e785040 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785040 0x40>;
+				status = "disabled";
+			};
+
+			wdt3: watchdog@1e785080 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e785080 0x40>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@1e7850c0 {
+				compatible = "aspeed,ast2600-wdt";
+				reg = <0x1e7850C0 0x40>;
+				status = "disabled";
+			};
+
+			peci0: peci-controller@1e78b000 {
+				compatible = "aspeed,ast2600-peci";
+				reg = <0x1e78b000 0x100>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_REF0CLK>;
+				resets = <&syscon ASPEED_RESET_PECI>;
+				cmd-timeout-ms = <1000>;
+				clock-frequency = <1000000>;
+				status = "disabled";
+			};
+
+			lpc: lpc@1e789000 {
+				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
+				reg = <0x1e789000 0x1000>;
+				reg-io-width = <4>;
+
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1e789000 0x1000>;
+
+				kcs1: kcs@24 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+					interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					kcs_chan = <1>;
+					status = "disabled";
+				};
+
+				kcs2: kcs@28 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
+					interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs3: kcs@2c {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
+					interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				kcs4: kcs@114 {
+					compatible = "aspeed,ast2500-kcs-bmc-v2";
+					reg = <0x114 0x1>, <0x118 0x1>, <0x11c 0x1>;
+					interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_ctrl: lpc-ctrl@80 {
+					compatible = "aspeed,ast2600-lpc-ctrl";
+					reg = <0x80 0x80>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lpc_snoop: lpc-snoop@80 {
+					compatible = "aspeed,ast2600-lpc-snoop";
+					reg = <0x80 0x80>;
+					interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+
+				lhc: lhc@a0 {
+					compatible = "aspeed,ast2600-lhc";
+					reg = <0xa0 0x24 0xc8 0x8>;
+				};
+
+				lpc_reset: reset-controller@98 {
+					compatible = "aspeed,ast2600-lpc-reset";
+					reg = <0x98 0x4>;
+					#reset-cells = <1>;
+				};
+
+				uart_routing: uart-routing@98 {
+					compatible = "aspeed,ast2600-uart-routing";
+					reg = <0x98 0x8>;
+					status = "disabled";
+				};
+
+				ibt: ibt@140 {
+					compatible = "aspeed,ast2600-ibt-bmc";
+					reg = <0x140 0x18>;
+					interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+					status = "disabled";
+				};
+			};
+
+			sdc: sdc@1e740000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e740000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e740000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_SDCLK>;
+				status = "disabled";
+
+				sdhci0: sdhci@1e740100 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x100 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+
+				sdhci1: sdhci@1e740200 {
+					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					reg = <0x200 0x100>;
+					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+					sdhci,auto-cmd12;
+					clocks = <&syscon ASPEED_CLK_SDIO>;
+					status = "disabled";
+				};
+			};
+
+			emmc_controller: sdc@1e750000 {
+				compatible = "aspeed,ast2600-sd-controller";
+				reg = <0x1e750000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e750000 0x10000>;
+				clocks = <&syscon ASPEED_CLK_GATE_EMMCCLK>;
+				status = "disabled";
+
+				emmc: sdhci@1e750100 {
+					compatible = "aspeed,ast2600-sdhci";
+					reg = <0x100 0x100>;
+					sdhci,auto-cmd12;
+					interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&syscon ASPEED_CLK_EMMC>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_emmc_default>;
+				};
+			};
+
+			vuart1: serial@1e787000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e787000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			vuart2: serial@1e788000 {
+				compatible = "aspeed,ast2500-vuart";
+				reg = <0x1e788000 0x40>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_APB1>;
+				no-loopback-test;
+				status = "disabled";
+			};
+
+			uart2: serial@1e78d000 {
+				compatible = "ns16550a";
+				reg = <0x1e78d000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART2CLK>;
+				resets = <&lpc_reset 5>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
+				status = "disabled";
+			};
+
+			uart3: serial@1e78e000 {
+				compatible = "ns16550a";
+				reg = <0x1e78e000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART3CLK>;
+				resets = <&lpc_reset 6>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
+				status = "disabled";
+			};
+
+			uart4: serial@1e78f000 {
+				compatible = "ns16550a";
+				reg = <0x1e78f000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART4CLK>;
+				resets = <&lpc_reset 7>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_txd4_default &pinctrl_rxd4_default>;
+				status = "disabled";
+			};
+
+			uart6: serial@1e790000 {
+				compatible = "ns16550a";
+				reg = <0x1e790000 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART6CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart6_default>;
+
+				status = "disabled";
+			};
+
+			uart7: serial@1e790100 {
+				compatible = "ns16550a";
+				reg = <0x1e790100 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART7CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart7_default>;
+
+				status = "disabled";
+			};
+
+			uart8: serial@1e790200 {
+				compatible = "ns16550a";
+				reg = <0x1e790200 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART8CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart8_default>;
+
+				status = "disabled";
+			};
+
+			uart9: serial@1e790300 {
+				compatible = "ns16550a";
+				reg = <0x1e790300 0x20>;
+				reg-shift = <2>;
+				reg-io-width = <4>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&syscon ASPEED_CLK_GATE_UART9CLK>;
+				no-loopback-test;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart9_default>;
+
+				status = "disabled";
+			};
+
+			i2c: bus@1e78a000 {
+				compatible = "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1e78a000 0x1000>;
+			};
+
+			fsim0: fsi@1e79b000 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b000 0x94>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi1_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			fsim1: fsi@1e79b100 {
+				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				reg = <0x1e79b100 0x94>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_fsi2_default>;
+				clocks = <&syscon ASPEED_CLK_GATE_FSICLK>;
+				status = "disabled";
+			};
+
+			udma: dma-controller@1e79e000 {
+				compatible = "aspeed,ast2600-udma";
+				reg = <0x1e79e000 0x1000>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				dma-channels = <28>;
+				#dma-cells = <1>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
+#include "aspeed-g6-pinctrl.dtsi"
+
+&i2c {
+	i2c0: i2c-bus@80 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		status = "disabled";
+	};
+
+	i2c1: i2c-bus@100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x100 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_default>;
+		status = "disabled";
+	};
+
+	i2c2: i2c-bus@180 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x180 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_default>;
+		status = "disabled";
+	};
+
+	i2c3: i2c-bus@200 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x200 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4_default>;
+		status = "disabled";
+	};
+
+	i2c4: i2c-bus@280 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x280 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c5_default>;
+		status = "disabled";
+	};
+
+	i2c5: i2c-bus@300 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x300 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c6_default>;
+		status = "disabled";
+	};
+
+	i2c6: i2c-bus@380 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x380 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c7_default>;
+		status = "disabled";
+	};
+
+	i2c7: i2c-bus@400 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x400 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		status = "disabled";
+	};
+
+	i2c8: i2c-bus@480 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x480 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		status = "disabled";
+	};
+
+	i2c9: i2c-bus@500 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x500 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c10_default>;
+		status = "disabled";
+	};
+
+	i2c10: i2c-bus@580 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x580 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c11_default>;
+		status = "disabled";
+	};
+
+	i2c11: i2c-bus@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x600 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c12_default>;
+		status = "disabled";
+	};
+
+	i2c12: i2c-bus@680 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x680 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c13_default>;
+		status = "disabled";
+	};
+
+	i2c13: i2c-bus@700 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x700 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c14_default>;
+		status = "disabled";
+	};
+
+	i2c14: i2c-bus@780 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x780 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c15_default>;
+		status = "disabled";
+	};
+
+	i2c15: i2c-bus@800 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x800 0x80>;
+		compatible = "aspeed,ast2600-i2c-bus";
+		clocks = <&syscon ASPEED_CLK_APB2>;
+		resets = <&syscon ASPEED_RESET_I2C>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+		bus-frequency = <100000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c16_default>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..4e5e786e18b7
--- /dev/null
+++ b/arch/arm/boot/dts/ast2400-facebook-netbmc-common.dtsi
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g4.dtsi"
+
+/ {
+	aliases {
+		/*
+		 * Override the default uart aliases to avoid breaking
+		 * the legacy applications.
+		 */
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x20000000>;
+	};
+};
+
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+#include "facebook-bmc-flash-layout.dtsi"
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default
+		     &pinctrl_ndts4_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..c0c43b8644ee
--- /dev/null
+++ b/arch/arm/boot/dts/ast2500-facebook-netbmc-common.dtsi
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+
+#include "aspeed-g5.dtsi"
+
+/ {
+	memory@80000000 {
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+/*
+ * Update reset type to "system" (full chip) to fix warm reboot hang issue
+ * when reset type is set to default ("soc", gated by reset mask registers).
+ */
+&wdt1 {
+	status = "okay";
+	aspeed,reset-type = "system";
+};
+
+&wdt2 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+
+	fmc_flash0: flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+	};
+
+	fmc_flash1: flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+	};
+};
+
+&mac1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&sdmmc {
+	status = "okay";
+};
+
+&sdhci1 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2_default>;
+};
diff --git a/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
new file mode 100644
index 000000000000..31590d3186a2
--- /dev/null
+++ b/arch/arm/boot/dts/ast2600-facebook-netbmc-common.dtsi
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	aliases {
+		mmc0 = &emmc;
+		spi1 = &spi1;
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw vmalloc=640M";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+
+		tpmdev@0 {
+			compatible = "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&fmc {
+	status = "okay";
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.0";
+
+#include "facebook-bmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "spi0.1";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			flash1@0 {
+				reg = <0x0 0x8000000>;
+				label = "flash1";
+			};
+		};
+	};
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&i2c15 {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index e9ced30159a7..713d18f80356 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-ariag25.dts - Device Tree file for Acme Systems Aria G25 (AT91SAM9G25 based)
  *
  * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>,
  *                    Robert Nelson <robertcnelson@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g25.dtsi"
@@ -15,11 +14,6 @@
 		     "atmel,at91sam9x5", "atmel,at91sam9";
 
 	aliases {
-		serial0 = &dbgu;
-		serial1 = &usart0;
-		serial2 = &usart1;
-		serial3 = &usart2;
-		serial4 = &usart3;
 		serial5 = &uart0;
 		serial6 = &uart1;
 	};
@@ -28,21 +22,12 @@
 		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
 	};
 
-	memory {
+	memory@20000000 {
 		/* 128 MB, change this for 256 MB revision */
 		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -52,120 +37,6 @@
 		};
 	};
 
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				/* N.B. Aria has no SD card detect (CD), assumed present */
-
-				pinctrl-0 = <
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-				};
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
-			/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
-
-			usart0: serial@f801c000 {
-				pinctrl-0 = <&pinctrl_usart0
-					     &pinctrl_usart0_rts
-					     &pinctrl_usart0_cts>;
-				status = "okay";
-			};
-
-			usart1: serial@f8020000 {
-				pinctrl-0 = <&pinctrl_usart1
-					     /* &pinctrl_usart1_rts */
-					     /* &pinctrl_usart1_cts */
-					    >;
-				status = "okay";
-			};
-
-			usart2: serial@f8024000 {
-				/* cannot activate RTS2+CTS2, clash with
-				 * ethernet on PB0 and PB1 */
-				pinctrl-0 = <&pinctrl_usart2>;
-				status = "okay";
-			};
-
-			usart3: serial@f8028000 {
-				compatible = "atmel,at91sam9260-usart";
-				reg = <0xf8028000 0x200>;
-				interrupts = <8 4 5>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_usart3
-					     /* &pinctrl_usart3_rts */
-					     /* &pinctrl_usart3_cts */
-					    >;
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				/*
-				 * following can be overwritten by bootloader:
-				 * for example u-boot 'ftd set' command
-				 */
-				local-mac-address = [00 00 00 00 00 00];
-				status = "okay";
-			};
-
-			/*
-			 * UART0/1 pins are marked as GPIO on
-			 * Aria documentation.
-			 * Change to "okay" if you need additional serial ports
-			 */
-			uart0: serial@f8040000 {
-				status = "disabled";
-			};
-
-			uart1: serial@f8044000 {
-				status = "disabled";
-			};
-
-			adc0: adc@f804c000 {
-				status = "okay";
-				atmel,adc-channels-used = <0xf>;
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			pinctrl@fffff400 {
-				w1_0 {
-					pinctrl_w1_0: w1_0-0 {
-						atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
-					};
-				};
-			};
-
-			rtc@fffffeb0 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -178,10 +49,135 @@
 
 	};
 
-	onewire@0 {
+	onewire {
 		compatible = "w1-gpio";
 		gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_w1_0>;
 	};
 };
+
+&adc0 {
+	status = "okay";
+	atmel,adc-channels-used = <0xf>;
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+/* TWD2+TCLK2 hidden behind ethernet, so no i2c2 */
+
+&macb0 {
+	phy-mode = "rmii";
+	/*
+	 * following can be overwritten by bootloader:
+	 * for example u-boot 'ftd set' command
+	 */
+	local-mac-address = [00 00 00 00 00 00];
+	status = "okay";
+};
+
+
+&mmc0 {
+	/* N.B. Aria has no SD card detect (CD), assumed present */
+
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	w1_0 {
+		pinctrl_w1_0: w1_0-0 {
+			atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+		};
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+/*
+ * UART0/1 pins are marked as GPIO on
+ * Aria documentation.
+ * Change to "okay" if you need additional serial ports
+ */
+&uart0 {
+	status = "disabled";
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&usart0 {
+	pinctrl-0 = <&pinctrl_usart0
+		     &pinctrl_usart0_rts
+		     &pinctrl_usart0_cts>;
+	status = "okay";
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1
+		     /* &pinctrl_usart1_rts */
+		     /* &pinctrl_usart1_cts */
+		    >;
+	status = "okay";
+};
+
+&usart2 {
+	/* cannot activate RTS2+CTS2, clash with
+	 * ethernet on PB0 and PB1 */
+	pinctrl-0 = <&pinctrl_usart2>;
+	status = "okay";
+};
+
+&usart3 {
+	compatible = "atmel,at91sam9260-usart";
+	reg = <0xf8028000 0x200>;
+	interrupts = <8 4 5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3
+		     /* &pinctrl_usart3_rts */
+		     /* &pinctrl_usart3_cts */
+		    >;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	num-ports = <3>;
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-ariettag25.dts b/arch/arm/boot/dts/at91-ariettag25.dts
index c514502081d2..2c52a71752c2 100644
--- a/arch/arm/boot/dts/at91-ariettag25.dts
+++ b/arch/arm/boot/dts/at91-ariettag25.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree file for Arietta G25
  * This device tree is minimal, to activate more peripherals, see:
@@ -5,19 +6,16 @@
  */
 /dts-v1/;
 #include "at91sam9g25.dtsi"
+
 / {
 	model = "Acme Systems Arietta G25";
 	compatible = "acme,ariettag25", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	aliases {
-		serial0 = &dbgu;
-	};
-
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x8000000>;
 	};
 
@@ -31,45 +29,9 @@
 		};
 	};
 
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-				  &pinctrl_mmc0_slot0_clk_cmd_dat0
-				  &pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-				};
-			};
-
-			usb2: gadget@f803c000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			rtc@fffffeb0 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
+
 		arietta_led {
 			label = "arietta_led";
 			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>; /* PB8 */
@@ -77,3 +39,49 @@
 		};
 	};
 };
+
+&dbgu {
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	num-ports = <3>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi
index b6ea3f4a7206..ee0f5da6d819 100644
--- a/arch/arm/boot/dts/at91-cosino.dtsi
+++ b/arch/arm/boot/dts/at91-cosino.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-cosino.dtsi - Device Tree file for Cosino core module
  *
@@ -7,8 +8,6 @@
  * Derived from at91sam9x5ek.dtsi by:
  *	Copyright (C) 2012 Atmel,
  *	2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 #include "at91sam9g35.dtsi"
@@ -21,20 +20,11 @@
 		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -43,87 +33,120 @@
 			clock-frequency = <12000000>;
 		};
 	};
+};
 
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
 
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
+&dbgu {
+	status = "okay";
+};
 
-			i2c0: i2c@f8010000 {
-				status = "okay";
-			};
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+		     &pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand-controller {
+		pinctrl-0 = <&pinctrl_nand_oe_we
+			     &pinctrl_nand_cs
+			     &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
 
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
 
-			pinctrl@fffff400 {
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-					};
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
 				};
-			};
 
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0x80000>;
+				};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;	/* Enable PMECC */
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
+				ubootenv@c0000 {
+					label = "U-Boot Env";
+					reg = <0xc0000 0x140000>;
+				};
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
 
-			uboot@40000 {
-				label = "u-boot";
-				reg = <0x40000 0x80000>;
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
 			};
+		};
+	};
+};
 
-			ubootenv@c0000 {
-				label = "U-Boot Env";
-				reg = <0xc0000 0x140000>;
-			};
+&i2c0 {
+	status = "okay";
+};
 
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
 
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x0f800000>;
-			};
+&pinctrl {
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
 		};
 	};
 };
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts
index 27ebb0f722fd..04cb7bee937d 100644
--- a/arch/arm/boot/dts/at91-cosino_mega2560.dts
+++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-cosino_mega2560.dts - Device Tree file for Cosino board with
  *			      Mega 2560 extension
@@ -8,8 +9,6 @@
  * Derived from at91sam9g35ek.dts by:
  * 	Copyright (C) 2012 Atmel,
  *      2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 /dts-v1/;
@@ -18,61 +17,59 @@
 / {
 	model = "HCE Cosino Mega 2560";
 	compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9";
+};
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
 
-			adc0: adc@f804c000 {
-				atmel,adc-ts-wires = <4>;
-				atmel,adc-ts-pressure-threshold = <10000>;
-				status = "okay";
-			};
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
 
-			rtc@fffffeb0 {
-				status = "okay";
-			};
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
 
-			usart1: serial@f8020000 {
-				status = "okay";
-			};
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		non-removable;
+	};
+};
 
-			usart2: serial@f8024000 {
-				status = "okay";
-			};
+&rtc {
+	status = "okay";
+};
 
-			usb2: gadget@f803c000 {
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
 
-			mmc1: mmc@f000c000 {
-				pinctrl-0 = <
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					non-removable;
-				};
-			};
-		};
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
 
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */
-					   &pioD 19 GPIO_ACTIVE_LOW
-					   &pioD 20 GPIO_ACTIVE_LOW
-					  >;
-		};
+&usb1 {
+	status = "okay";
+};
 
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
+&usb2 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/at91-dvk_som60.dts b/arch/arm/boot/dts/at91-dvk_som60.dts
new file mode 100644
index 000000000000..ededd5b0d27b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_som60.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+/dts-v1/;
+#include "at91-som60.dtsi"
+#include "at91-dvk_su60_somc.dtsi"
+#include "at91-dvk_su60_somc_lcm.dtsi"
+
+/ {
+	model = "Laird DVK SOM60";
+	compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+		tick-timer = &pit;
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
new file mode 100644
index 000000000000..3542ad8a243e
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	sound {
+		compatible = "atmel,asoc-wm8904";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
+
+		atmel,model = "wm8904 @ DVK-SOM60";
+		atmel,audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"IN2L", "Line In Jack",
+			"IN2R", "Line In Jack",
+			"Mic", "MICBIAS",
+			"IN1L", "Mic";
+
+		atmel,ssc-controller = <&ssc0>;
+		atmel,audio-codec = <&wm8904>;
+
+		status = "okay";
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	slot@0 {
+		bus-width = <4>;
+		cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&spi0 {
+	status = "okay";
+
+	/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
+	flash@0 {
+		compatible = "mxicy,mx25u4035", "jedec,spi-nor";
+		spi-max-frequency = <33000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	atmel,clk-from-rk-pin;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8904: wm8904@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 10>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	eeprom@57 {
+		compatible = "giantec,gt24c32a", "atmel,24c32";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&pit {
+	status = "okay";
+};
+
+&adc0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&macb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <7>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_geth_int>;
+		interrupt-parent = <&pioB>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+		txen-skew-ps = <800>;
+		txc-skew-ps = <3000>;
+		rxdv-skew-ps = <400>;
+		rxc-skew-ps = <3000>;
+		rxd0-skew-ps = <400>;
+		rxd1-skew-ps = <400>;
+		rxd2-skew-ps = <400>;
+		rxd3-skew-ps = <400>;
+	};
+};
+
+&macb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	ethernet-phy@1 {
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_eth_int>;
+		interrupt-parent = <&pioC>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
new file mode 100644
index 000000000000..bea920b192b6
--- /dev/null
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc_lcm.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	panel: panel {
+		compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92";
+		backlight = <&backlight>;
+		power-supply = <&vcc_lcd_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_lcd_reg: fixedregulator_lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC LCM";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_lcd_ctp_int: lcd_ctp_int {
+			 atmel,pins =
+				 <AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	ft5426@38 {
+		compatible = "focaltech,ft5426", "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_ctp_int>;
+
+		interrupt-parent = <&pioC>;
+		interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+	};
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts
index f89598af4c2b..9dfd5de808d1 100644
--- a/arch/arm/boot/dts/at91-foxg20.dts
+++ b/arch/arm/boot/dts/at91-foxg20.dts
@@ -1,11 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-foxg20.dts - Device Tree file for Acme Systems FoxG20 board
  *
  * Based on DT files for at91sam9g20ek evaluation board (AT91SAM9G20 SoC)
  *
  * Copyright (C) 2013 Douglas Gilbert <dgilbert@interlog.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
@@ -18,20 +17,11 @@
 		bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -43,6 +33,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioC 6 GPIO_ACTIVE_HIGH>;
 				status = "okay";
@@ -53,6 +55,7 @@
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot1_cmd_dat0
 					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 
 				slot@1 {
@@ -128,13 +131,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c0>;
 		i2c-gpio,delay-us = <5>;	/* ~85 kHz */
@@ -152,14 +155,14 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn {
+		button {
 			label = "Button";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91-gatwick.dts b/arch/arm/boot/dts/at91-gatwick.dts
new file mode 100644
index 000000000000..551300fd7746
--- /dev/null
+++ b/arch/arm/boot/dts/at91-gatwick.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-gatwick.dts - Device Tree file for the Gatwick board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Project Gatwick";
+	compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		reset-button {
+			label = "Reset Button";
+			linux,code = <KEY_SETUP>;
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ethernet {
+			label = "gatwick:yellow:ethernet";
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-wifi {
+			label = "gatwick:green:wifi";
+			gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-ble {
+			label = "gatwick:blue:ble";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-lora {
+			label = "gatwick:orange:lora";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-blank {
+			label = "gatwick:green:blank";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led-user {
+			label = "gatwick:yellow:user";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_key_gpio: key_gpio_0 {
+		  atmel,pins =
+			  <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
+	  };
+	};
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* FTDI USART */
+&usart0 {
+	status = "okay";
+};
+
+/* GPS USART */
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1>;
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+
+	spidev@0 {
+		compatible = "semtech,sx1301";
+		reg = <0>;
+		spi-max-frequency = <8000000>;
+	};
+};
+
+&usb1 {
+	status = "okay";
+	/delete-property/atmel,oc-gpio;
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox.dts b/arch/arm/boot/dts/at91-kizbox.dts
index bf18ece0c027..307663b4eec2 100644
--- a/arch/arm/boot/dts/at91-kizbox.dts
+++ b/arch/arm/boot/dts/at91-kizbox.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-kizbox.dts - Device Tree file for Overkiz Kizbox board
  *
  * Copyright (C) 2012-2014 Boris BREZILLON <b.brezillon@overkiz.com>
  *               2014-2015 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g20.dtsi"
@@ -19,141 +18,173 @@
 		stdout-path = &dbgu;
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x2000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		main_xtal {
 			clock-frequency = <18432000>;
 		};
 	};
 
-	ahb {
-		apb {
-			macb0: ethernet@fffc4000 {
-				phy-mode = "mii";
-				pinctrl-0 = <&pinctrl_macb_rmii
-				             &pinctrl_macb_rmii_mii_alt>;
-				status = "okay";
-			};
-
-			usart3: serial@fffd0000 {
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffd40 {
-				timeout-sec = <15>;
-				atmel,max-heartbeat-sec = <16>;
-				atmel,min-heartbeat-sec = <0>;
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00500000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			status = "okay";
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			ubi@20000 {
-				label = "ubi";
-				reg = <0x20000 0x7fe0000>;
-			};
-		};
-	};
-
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		reset {
+		button-reset {
 			label = "PB_RST";
 			gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		user {
+		button-user {
 			label = "PB_USER";
 			gpios = <&pioB 31 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x101>;
-			gpio-key,wakeup;
-		};
-	};
-
-	i2c@0 {
-		status = "okay";
-
-		rtc: pcf8563@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
+			wakeup-source;
 		};
 	};
 
-	pwm_leds {
+	led-controller {
 		compatible = "pwm-leds";
 
-		network_green {
+		led-1 {
 			label = "pwm:green:network";
-			pwms = <&tcb_pwm 2 10000000 PWM_POLARITY_INVERTED>;
+			pwms = <&tcb1_pwm1 0 10000000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
-		network_red {
+		led-2 {
 			label = "pwm:red:network";
-			pwms = <&tcb_pwm 4 10000000 PWM_POLARITY_INVERTED>;
+			pwms = <&tcb1_pwm2 0 10000000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
-		user_green {
+		led-3 {
 			label = "pwm:green:user";
-			pwms = <&tcb_pwm 0 10000000 PWM_POLARITY_INVERTED>;
+			pwms = <&tcb1_pwm0 0 10000000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 
-		user_red {
+		led-4 {
 			label = "pwm:red:user";
-			pwms = <&tcb_pwm 1 10000000 PWM_POLARITY_INVERTED>;
+			pwms = <&tcb1_pwm0 1 10000000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "default-on";
 		};
 	};
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>, <1>;
+	};
 
-	tcb_pwm: pwm {
+	timer@2 {
+		compatible = "atmel,tcb-timer";
+		reg = <2>;
+	};
+};
+
+&tcb1 {
+	tcb1_pwm0: pwm@0 {
 		compatible = "atmel,tcb-pwm";
+		reg = <0>;
 		#pwm-cells = <3>;
-		tc-block = <1>;
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_tcb1_tioa0
-			     &pinctrl_tcb1_tioa1
-			     &pinctrl_tcb1_tioa2
-			     &pinctrl_tcb1_tiob0>;
+		pinctrl-0 = <&pinctrl_tcb1_tioa0 &pinctrl_tcb1_tiob0>;
+	};
+
+	tcb1_pwm1: pwm@1 {
+		compatible = "atmel,tcb-pwm";
+		reg = <1>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa1>;
+	};
+
+	tcb1_pwm2: pwm@2 {
+		compatible = "atmel,tcb-pwm";
+		reg = <2>;
+		#pwm-cells = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tcb1_tioa2>;
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "soft";
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	pinctrl-0 = <&pinctrl_macb_rmii
+		     &pinctrl_macb_rmii_mii_alt>;
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	timeout-sec = <15>;
+	atmel,max-heartbeat-sec = <16>;
+	atmel,min-heartbeat-sec = <0>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&i2c_gpio0 {
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
 	};
 };
diff --git a/arch/arm/boot/dts/at91-kizbox2-2.dts b/arch/arm/boot/dts/at91-kizbox2-2.dts
new file mode 100644
index 000000000000..cab8b3579efa
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2-2.dts - Device Tree file for the Kizbox2 with
+ * two head board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *	    Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox2-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox 2 with two heads";
+	compatible = "overkiz,kizbox2-2", "atmel,sama5d31",
+		     "atmel,sama5d3", "atmel,sama5";
+};
+
+&usart1 {
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2-common.dtsi b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
new file mode 100644
index 000000000000..e5e21dff882f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox2-common.dtsi
@@ -0,0 +1,256 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox2_common.dtsi - Device Tree Include file for
+ * Overkiz Kizbox 2 family SoC
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *
+ * Authors: Antoine Aubert <a.aubert@overkiz.com>
+ *          Gaël Portay <g.portay@overkiz.com>
+ *          Kévin Raymond <k.raymond@overkiz.com>
+ */
+#include "sama5d31.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-prog {
+			label = "PB_PROG";
+			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		button-reset {
+			label = "PB_RST";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	pmic: act8865@5b {
+		compatible = "active-semi,act8865";
+		reg = <0x5b>;
+		status = "okay";
+
+		regulators {
+			vcc_1v8_reg: DCDC_REG1 {
+				regulator-name = "VCC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcc_1v2_reg: DCDC_REG2 {
+				regulator-name = "VCC_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vcc_3v3_reg: DCDC_REG3 {
+				regulator-name = "VCC_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vddfuse_reg: LDO_REG1 {
+				regulator-name = "FUSE_2V5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vddana_reg: LDO_REG2 {
+				regulator-name = "VDDANA";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vled_reg: LDO_REG3 {
+				regulator-name = "VLED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			v3v8_rf_reg: LDO_REG4 {
+				regulator-name = "V3V8_RF";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <3800000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&usart2 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
+		     &pinctrl_pwm0_pwmh1_1
+		     &pinctrl_pwm0_pwmh2_0>;
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <3333>;
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+/* WMBUS (inverted with IO in the latest schematic) */
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* RTS */
+&pinctrl_usart1 {
+	atmel,pins =
+		<AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 7 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
+
+/* IO (inverted with WMBUS in the latest schematic) */
+&pinctrl_usart2 {
+	atmel,pins =
+		<AT91_PIOE 25 AT91_PERIPH_B AT91_PINCTRL_NONE
+		 AT91_PIOE 26 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+		 AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/at91-kizbox2.dts b/arch/arm/boot/dts/at91-kizbox2.dts
deleted file mode 100644
index f0b1563cb3f1..000000000000
--- a/arch/arm/boot/dts/at91-kizbox2.dts
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * at91-kizbox2.dts - Device Tree file for Overkiz Kizbox 2 board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "sama5d31.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox 2";
-	compatible = "overkiz,kizbox2", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x10000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			i2c1: i2c@f0018000 {
-				status = "okay";
-
-				pmic: act8865@5b {
-					compatible = "active-semi,act8865";
-					reg = <0x5b>;
-					status = "okay";
-
-					regulators {
-						vcc_1v8_reg: DCDC_REG1 {
-							regulator-name = "VCC_1V8";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <1800000>;
-							regulator-always-on;
-						};
-
-						vcc_1v2_reg: DCDC_REG2 {
-							regulator-name = "VCC_1V2";
-							regulator-min-microvolt = <1200000>;
-							regulator-max-microvolt = <1200000>;
-							regulator-always-on;
-						};
-
-						vcc_3v3_reg: DCDC_REG3 {
-							regulator-name = "VCC_3V3";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vddfuse_reg: LDO_REG1 {
-							regulator-name = "FUSE_2V5";
-							regulator-min-microvolt = <2500000>;
-							regulator-max-microvolt = <2500000>;
-						};
-
-						vddana_reg: LDO_REG2 {
-							regulator-name = "VDDANA";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						vled_reg: LDO_REG3 {
-							regulator-name = "VLED";
-							regulator-min-microvolt = <3300000>;
-							regulator-max-microvolt = <3300000>;
-							regulator-always-on;
-						};
-
-						v3v8_rf_reg: LDO_REG4 {
-							regulator-name = "V3V8_RF";
-							regulator-min-microvolt = <3800000>;
-							regulator-max-microvolt = <3800000>;
-							regulator-always-on;
-						};
-					};
-				};
-			};
-
-			usart0: serial@f001c000 {
-				status = "okay";
-			};
-
-			usart1: serial@f0020000 {
-				status = "okay";
-			};
-
-			pwm0: pwm@f002c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
-					     &pinctrl_pwm0_pwmh1_1
-					     &pinctrl_pwm0_pwmh2_0>;
-				status = "okay";
-			};
-
-			adc0: adc@f8018000 {
-				atmel,adc-vref = <3333>;
-				status = "okay";
-			};
-
-			usart2: serial@f8020000 {
-				status = "okay";
-			};
-
-			macb1: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			dbgu: serial@ffffee00 {
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		usb1: ohci@00600000 {
-			status = "okay";
-		};
-
-		usb2: ehci@00700000 {
-			status = "okay";
-		};
-
-		nand0: nand@60000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			ubi@20000 {
-				label = "ubi";
-				reg = <0x20000 0x7fe0000>;
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioE 27 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			gpio-key,wakeup;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			gpio-key,wakeup;
-		};
-
-		user {
-			label = "PB_USER";
-			gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x101>;
-			gpio-key,wakeup;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		blue {
-			label = "pwm:blue:user";
-			pwms = <&pwm0 2 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		green {
-			label = "pwm:green:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		red {
-			label = "pwm:red:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
new file mode 100644
index 000000000000..7075df6549e9
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -0,0 +1,309 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3-hs.dts - Device Tree file for Overkiz KIZBOX3-HS board
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizbox3_common.dtsi"
+
+/ {
+	model = "Overkiz KIZBOX3-HS";
+	compatible = "overkiz,kizbox3-hs", "atmel,sama5d2", "atmel,sama5";
+
+	led-controller-1 {
+		status = "okay";
+
+		led-1 {
+			status = "okay";
+		};
+
+		led-2 {
+			status = "okay";
+		};
+
+		led-3 {
+			status = "okay";
+		};
+
+		led-4 {
+			status = "okay";
+		};
+	};
+
+	led-controller-2  {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_red
+			     &pinctrl_led_white>;
+		status = "okay";
+
+		led-5 {
+			label = "pio:red:user";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-6 {
+			label = "pio:white:user";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default" , "default", "default",
+				"default", "default" ;
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		pinctrl-1 = <&pinctrl_pio_rf &pinctrl_pio_wifi>;
+		pinctrl-2 = <&pinctrl_pio_io_boot
+			     &pinctrl_pio_io_reset
+			     &pinctrl_pio_io_test_radio>;
+		pinctrl-3 = <&pinctrl_pio_zbe_test_radio
+			     &pinctrl_pio_zbe_rst>;
+		pinctrl-4 = <&pinctrl_pio_input>;
+
+		switch-1 {
+			label = "SW1";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x101>;
+			wakeup-source;
+		};
+
+		switch-2 {
+			label = "SW2";
+			gpios = <&pioA PIN_PA18 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		switch-3 {
+			label = "SW3";
+			gpios = <&pioA PIN_PA22 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		switch-7 {
+			label = "SW7";
+			gpios = <&pioA PIN_PA26 GPIO_ACTIVE_LOW>;
+			linux,code = <0x107>;
+			wakeup-source;
+		};
+
+		switch-8 {
+			label = "SW8";
+			gpios = <&pioA PIN_PA24 GPIO_ACTIVE_LOW>;
+			linux,code = <0x108>;
+			wakeup-source;
+		};
+	};
+
+	gpios {
+		compatible = "gpio";
+		status = "okay";
+
+		rf_on {
+			label = "rf on";
+			gpio = <&pioA PIN_PC19 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		wifi_on {
+			label = "wifi on";
+			gpio = <&pioA PIN_PC20 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_test_radio {
+			label = "zbe test radio";
+			gpio = <&pioA PIN_PB21 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		zbe_rst {
+			label = "zbe rst";
+			gpio = <&pioA PIN_PB25 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_reset {
+			label = "io reset";
+			gpio = <&pioA PIN_PB30 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_test_radio {
+			label = "io test radio";
+			gpio = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_0 {
+			label = "io boot 0";
+			gpio = <&pioA PIN_PC11 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		io_boot_1 {
+			label = "io boot 1";
+			gpio = <&pioA PIN_PC17 GPIO_ACTIVE_HIGH>;
+			output;
+			init-low;
+		};
+
+		verbose_bootloader {
+			label = "verbose bootloader";
+			gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 nail_bed_detection  {
+			label = "nail bed detection";
+			gpio = <&pioA PIN_PB12 GPIO_ACTIVE_HIGH>;
+			input;
+		};
+
+		 id_usba {
+			label = "id usba";
+			gpio = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+			input;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA22__GPIO>,
+		<PIN_PA24__GPIO>,
+		<PIN_PA26__GPIO>,
+		<PIN_PA29__GPIO>,
+		<PIN_PA18__GPIO>;
+		bias-disable;
+		};
+
+	pinctrl_gpio {
+		pinctrl_pio_rf: gpio_rf {
+			pinmux = <PIN_PC19__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_wifi: gpio_wifi {
+			pinmux = <PIN_PC20__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_boot: gpio_io_boot {
+			pinmux =
+			<PIN_PC11__GPIO>,
+			<PIN_PC17__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_io_test_radio: gpio_io_test_radio {
+			pinmux = <PIN_PC9__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_test_radio: gpio_zbe_test_radio {
+			pinmux = <PIN_PB21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_pio_zbe_rst: gpio_zbe_rst {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+		/* stm32 reset must be open drain (internal pull up) */
+		pinctrl_pio_io_reset: gpio_io_reset {
+			pinmux = <PIN_PB30__GPIO>;
+			bias-disable;
+			drive-open-drain = <1>;
+			output-low;
+		};
+		pinctrl_pio_input: gpio_input {
+			pinmux =
+			<PIN_PB11__GPIO>,
+			<PIN_PB12__GPIO>,
+			<PIN_PC0__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_leds {
+		pinctrl_led_red: led_red {
+			pinmux = <PIN_PB1__GPIO>;
+			bias-disable;
+		};
+		pinctrl_led_white: led_white {
+			pinmux = <PIN_PB8__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&adc {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&flx0 {
+	status = "okay";
+
+	uart5: serial@200  {
+			status = "okay";
+	};
+};
+
+&flx3 {
+	status = "okay";
+	uart8: serial@200 {
+		status = "okay";
+	};
+};
+
+&flx4 {
+	status = "okay";
+
+	i2c6: i2c@600 {
+		status = "okay";
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
new file mode 100644
index 000000000000..abe27adfa4d6
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3
+ * family SoC boards
+ *
+ * Copyright (C) 2018 Overkiz SAS
+ *
+ * Authors: Dorian Rocipon <d.rocipon@overkiz.com>
+ *          Kevin Carli <k.carli@overkiz.com>
+ *          Mickael Gardet <m.gardet@overkiz.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Overkiz Kizbox3";
+	compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		serial5 = &uart5;
+		serial6 = &uart8;
+	};
+
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = "serial1:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	vdd_adc_vddana: supply_3v3_ana {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vddana";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_adc_vref: supply_3v3_ref {
+		compatible = "regulator-fixed";
+		regulator-name = "adc-vref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwm0_pwm_h0
+			     &pinctrl_pwm0_pwm_h1
+			     &pinctrl_pwm0_pwm_h2
+			     &pinctrl_pwm0_pwm_h3>;
+		status = "disabled";
+
+		led-1 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+			status = "disabled";
+		};
+
+		led-3 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+
+		led-4 {
+			label = "pwm:white:user";
+			pwms = <&pwm0 3 10000000 0>;
+			max-brightness = <255>;
+			status = "disabled";
+		};
+	};
+};
+
+&ebi {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+		pinctrl-names = "default";
+		reg = <0x3 0x0 0x800000>;
+
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			u-boot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x140000>;
+			};
+
+			u-boot-factory@160000 {
+				label = "u-boot-factory";
+				reg = <0x160000 0x140000>;
+			};
+
+			ubi@2A0000 {
+				label = "ubi";
+				reg = <0x2A0000 0x7D60000>;
+			};
+		};
+
+	};
+};
+
+&rtc {
+	status = "okay";
+};
+
+&pioA {
+	pinctrl_ebi_nand_addr: ebi-addr-1 {
+		pinmux = <PIN_PA0__D0>,
+			<PIN_PA1__D1>,
+			<PIN_PA2__D2>,
+			<PIN_PA3__D3>,
+			<PIN_PA4__D4>,
+			<PIN_PA5__D5>,
+			<PIN_PA6__D6>,
+			<PIN_PA7__D7>,
+			<PIN_PA8__NWE_NANDWE>,
+			<PIN_PA9__NCS3>,
+			<PIN_PA10__A21_NANDALE>,
+			<PIN_PA11__A22_NANDCLE>,
+			<PIN_PA21__NANDRDY>;
+		bias-disable;
+	};
+
+	pinctrl_usart {
+		pinctrl_usart_0: usart0-0 {
+			pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>;
+			bias-disable;
+		};
+		pinctrl_usart_1: usart1-0 {
+			pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>;
+			bias-disable;
+		};
+		pinctrl_usart_2: usart2-0 {
+			pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>;
+			bias-disable;
+		};
+		pinctrl_usart_3: usart3-0 {
+			pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>;
+			bias-disable;
+		};
+		pinctrl_usart_4: usart4-0 {
+			pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>;
+			bias-disable;
+		};
+		pinctrl_flx0_default: flx0_usart_default {
+			pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX
+			<PIN_PB29__FLEXCOM0_IO1>; //RX
+			bias-disable;
+		};
+		pinctrl_flx3_default: flx3_usart_default {
+			pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX
+			<PIN_PB23__FLEXCOM3_IO0>; //TX
+			bias-disable;
+		};
+	};
+
+	pinctrl_flx4_default: flx4_i2c6_default {
+		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
+		<PIN_PD13__FLEXCOM4_IO1>; //CLK
+		bias-disable;
+		drive-open-drain = <1>;
+	};
+
+	pinctrl_pwm0 {
+		pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 {
+			pinmux = <PIN_PA30__PWMH0>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h1: pwm0_pwmh1 {
+			pinmux = <PIN_PB0__PWMH1>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 {
+			pinmux = <PIN_PB5__PWMH2>;
+			bias-disable;
+		};
+		pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 {
+			pinmux = <PIN_PB7__PWMH3>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_adc {
+		pinctrl_adc2: adc2 {
+			pinmux = <PIN_PD21__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc3: adc3 {
+			pinmux = <PIN_PD22__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc4: adc4 {
+			pinmux = <PIN_PD23__GPIO>;
+			bias-disable;
+		};
+		pinctrl_adc5: adc5 {
+			pinmux = <PIN_PD24__GPIO>;
+			bias-disable;
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_0>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+/* debug uart */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_1>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_2>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_3>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart_4>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "disabled";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart5: serial@200  {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart8: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "disabled";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "disabled";
+
+	i2c6: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc2
+		     &pinctrl_adc3
+		     &pinctrl_adc4
+		     &pinctrl_adc5>;
+
+	vddana-supply = <&vdd_adc_vddana>;
+	vref-supply = <&vdd_adc_vref>;
+	status = "disabled";
+};
+
+&securam {
+	export;
+
+	/* export overkiz u-boot mode/version and factory */
+	uboot@1400 {
+		reg = <0x1400 0x20>;
+		export;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-base.dts b/arch/arm/boot/dts/at91-kizboxmini-base.dts
new file mode 100644
index 000000000000..81c29ca5cc1b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-base.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-kizboxmini-base.dts - Device Tree file for Overkiz Kizbox mini
+ * base board
+ *
+ * Copyright (C) 2015 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini";
+	compatible = "overkiz,kizboxmini-base", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&pinctrl_usart0 {
+	atmel,pins =
+		<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+		 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+		 AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-common.dtsi b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
new file mode 100644
index 000000000000..42640fe6b6d0
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-common.dtsi
@@ -0,0 +1,168 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
+ *
+ * Copyright (C) 2014-2018 Overkiz SAS
+ *   Author: Antoine Aubert <a.aubert@overkiz.com>
+ *           Gaël Portay <g.portay@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+#include "at91sam9g25.dtsi"
+
+/ {
+	chosen {
+		bootargs = "ubi.mtd=ubi";
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		adc_op_clk {
+			status = "disabled";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		key-prog {
+			label = "PB_PROG";
+			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
+			linux,code = <0x102>;
+			wakeup-source;
+		};
+
+		key-reset {
+			label = "PB_RST";
+			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
+			linux,code = <0x100>;
+			wakeup-source;
+		};
+	};
+
+	leds: led-controller-1 {
+		compatible = "pwm-leds";
+
+		led_blue: led-1 {
+			label = "pwm:blue:user";
+			pwms = <&pwm0 2 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "none";
+			status = "disabled";
+		};
+
+		led_green: led-2 {
+			label = "pwm:green:user";
+			pwms = <&pwm0 0 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+
+		led_red: led-3 {
+			label = "pwm:red:user";
+			pwms = <&pwm0 1 10000000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
+		};
+	};
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
+		     &pinctrl_pwm0_pwm1_1
+		     &pinctrl_pwm0_pwm2_1>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_addr_nand
+			&pinctrl_ebi_data_0_7>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_nand_oe_we
+		     &pinctrl_nand_cs
+		     &pinctrl_nand_rb>;
+	pinctrl-names = "default";
+
+	nand@3 {
+		reg = <0x3 0x0 0x800000>;
+		rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			bootstrap@0 {
+				label = "bootstrap";
+				reg = <0x0 0x20000>;
+			};
+
+			ubi@20000 {
+				label = "ubi";
+				reg = <0x20000 0x7fe0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <1>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
new file mode 100644
index 000000000000..c07d3076a9bc
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini Mother Board";
+	compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&usb0 {
+	num-ports = <2>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
new file mode 100644
index 000000000000..ab50f4d22387
--- /dev/null
+++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2015-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz Kizbox Mini RailDIN";
+	compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+};
+
+&pinctrl {
+	adc0 {
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_ad5>;
+	atmel,adc-channels-used = <0x0020>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
deleted file mode 100644
index 9f72b4932634..000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- *
- * Licensed under GPLv2 or later.
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox mini";
-	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		apb {
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-
-			pwm0: pwm@f8034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-					     &pinctrl_pwm0_pwm1_1>;
-				status = "okay";
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			num-ports = <1>;
-			status = "okay";
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
-
-			bootstrap@0 {
-				label = "bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			ubi@20000 {
-				label = "ubi";
-				reg = <0x20000 0x7fe0000>;
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			gpio-key,wakeup;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			gpio-key,wakeup;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		green {
-			label = "pwm:green:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		red {
-			label = "pwm:red:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/at91-linea.dtsi b/arch/arm/boot/dts/at91-linea.dtsi
new file mode 100644
index 000000000000..533a440d5583
--- /dev/null
+++ b/arch/arm/boot/dts/at91-linea.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-linea.dtsi - Device Tree Include file for the Axentia Linea Module.
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	compatible = "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&tcb0 {
+	timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@51 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
diff --git a/arch/arm/boot/dts/at91-lmu5000.dts b/arch/arm/boot/dts/at91-lmu5000.dts
new file mode 100644
index 000000000000..f8863d7c0798
--- /dev/null
+++ b/arch/arm/boot/dts/at91-lmu5000.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for CalAmp LMU5000 board
+ *
+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "CalAmp LMU5000";
+	compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+			status = "okay";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				kernel@0 {
+					label = "kernel";
+					reg = <0x0 0x400000>;
+				};
+
+				rootfs@400000 {
+					label = "rootfs";
+					reg = <0x400000 0x3C00000>;
+				};
+
+				user1@4000000 {
+					label = "user1";
+					reg = <0x4000000 0x2000000>;
+				};
+
+				user2@6000000 {
+					label = "user2";
+					reg = <0x6000000 0x2000000>;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&ssc0 {
+	status = "okay";
+	pinctrl-0 = <&pinctrl_ssc0_tx>;
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usart2 {
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+	atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-natte.dtsi b/arch/arm/boot/dts/at91-natte.dtsi
new file mode 100644
index 000000000000..49f0a0c46cde
--- /dev/null
+++ b/arch/arm/boot/dts/at91-natte.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-natte.dts - Device Tree include file for the Natte board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+
+/ {
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&ioexp 0 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 1 GPIO_ACTIVE_HIGH>,
+			    <&ioexp 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	batntc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 5>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batntc0", "batntc1", "batntc2", "batntc3",
+			"batntc4", "batntc5", "batntc6", "batntc7";
+	};
+
+	batv-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 6>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"batv0", "batv1", "batv2", "batv3",
+			"batv4", "batv5", "batv6", "batv7";
+	};
+
+	iout-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 7>;
+		io-channel-names = "parent";
+		mux-controls = <&mux>;
+
+		channels =
+			"iout0", "iout1", "iout2", "iout3",
+			"iout4", "iout5", "iout6", "iout7";
+	};
+
+	i2c-mux {
+		compatible = "i2c-mux";
+		mux-locked;
+		i2c-parent = <&i2c0>;
+		mux-controls = <&mux>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@4 {
+			reg = <4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@5 {
+			reg = <5>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@6 {
+			reg = <6>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+
+		i2c@7 {
+			reg = <7>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			charger@9 {
+				compatible = "ti,bq24735";
+				reg = <0x9>;
+
+				ti,charge-current = <2000>;
+				ti,charge-voltage = <16800>;
+
+				poll-interval = <20000>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	ioexp: ioexp@20 {
+		#gpio-cells = <2>;
+		compatible = "semtech,sx1502q";
+		reg = <0x20>;
+
+		gpio-controller;
+		ngpios = <8>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio3_cfg_pins>;
+
+		gpio3_cfg_pins: gpio3_cfg {
+			pins = "gpio3";
+			bias-pull-up;
+		};
+	};
+
+	adc: adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <4>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <4>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
new file mode 100644
index 000000000000..f71377c9b757
--- /dev/null
+++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts
@@ -0,0 +1,306 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * at91-nattis-2-natte-2.dts - Device Tree file for the Linea/Nattis board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include "at91-linea.dtsi"
+#include "at91-natte.dtsi"
+
+/ {
+	model = "Axentia Linea-Nattis v2 Natte v2";
+	compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-wakeup {
+			label = "Wakeup";
+			linux,code = <10>;
+			wakeup-source;
+			gpios = <&pioB 27 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	panel_reg: panel-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VCC";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	bl_reg: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-VDD";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 100000 0>;
+
+		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+				     10 11 12 13 14 15 16 17 18 19
+				     20 21 22 23 24 25 26 27 28 29
+				     30 31 32 33 34 35 36 37 38 39
+				     40 41 42 43 44 45 46 47 48 49
+				     50 51 52 53 54 55 56 57 58 59
+				     60 61 62 63 64 65 66 67 68 69
+				     70 71 72 73 74 75 76 77 78 79
+				     80 81 82 83 84 85 86 87 88 89
+				     90 91 92 93 94 95 96 97 98 99
+				    100>;
+		default-brightness-level = <40>;
+
+		power-supply = <&bl_reg>;
+		enable-gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_blon>;
+	};
+
+	panel: panel {
+		compatible = "sharp,lq150x1lg11", "panel-lvds";
+
+		backlight = <&panel_bl>;
+		power-supply = <&panel_reg>;
+
+		width-mm = <304>;
+		height-mm = <228>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			// 1024x768 @ 60Hz (typical)
+			clock-frequency = <50000000 65000000 80000000>;
+			hactive = <1024>;
+			vactive = <768>;
+			hfront-porch = <48 88 88>;
+			hback-porch = <96 168 168>;
+			hsync-len = <32 64 64>;
+			vsync-len = <3 13 74>;
+			vfront-porch = <3 13 74>;
+			vback-porch = <3 12 74>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,ds90c185", "lvds-encoder";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_prlud0 &pinctrl_lvds_hipow0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&hlcdc_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "nattis-tfa9879";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&cpu_dai>;
+		simple-audio-card,frame-master = <&cpu_dai>;
+		simple-audio-card,widgets = "Line", "Line Out Jack";
+		simple-audio-card,routing = "Line Out Jack", "LINEOUT";
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssc0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&amp>;
+		};
+	};
+};
+
+&pinctrl {
+	nattis {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOD  5 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_lvds_prlud0: lvds_prlud0 {
+			atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_lvds_hipow0: lvds_hipow0 {
+			atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+
+		pinctrl_blon: blon {
+			atmel,pins = <AT91_PIOA 20 AT91_PERIPH_GPIO
+				      (AT91_PINCTRL_OUTPUT |
+				       AT91_PINCTRL_OUTPUT_VAL(0))>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	clock-frequency = <100000>;
+
+	temp@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	amp: amplifier@6c {
+		 compatible = "nxp,tfa9879";
+		 reg = <0x6c>;
+		 #sound-dai-cells = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+
+	atmel,clk-from-rk-pin;
+	#sound-dai-cells = <0>;
+};
+
+&hlcdc {
+	status = "okay";
+
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb565>;
+
+		port@0 {
+			hlcdc_output: endpoint {
+				remote-endpoint = <&lvds_encoder_input>;
+				bus-width = <16>;
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+		     &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_cd>;
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+		cd-inverted;
+	};
+};
+
+&usart0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0>;
+	atmel,use-dma-rx;
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "barebox";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x1f800000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&usb0 {
+	status = "okay";
+
+	atmel,vbus-gpio = <&pioD 28 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
diff --git a/arch/arm/boot/dts/at91-q5xr5.dts b/arch/arm/boot/dts/at91-q5xr5.dts
new file mode 100644
index 000000000000..9cf60b6f695c
--- /dev/null
+++ b/arch/arm/boot/dts/at91-q5xr5.dts
@@ -0,0 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree file for Exegin Q5xR5 board
+ *
+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
+ */
+
+/dts-v1/;
+#include "at91sam9g20.dtsi"
+
+/ {
+	model = "Exegin Q5x (rev5)";
+	compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
+	};
+
+	memory {
+		reg = <0x20000000 0x0>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		main_clock: clock@0 {
+			compatible = "atmel,osc", "fixed-clock";
+			clock-frequency = <18432000>;
+		};
+
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "cfi-flash";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x1000000 0x800000>;
+		bank-width = <2>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			kernel@0 {
+				label = "kernel";
+				reg = <0x0 0x200000>;
+			};
+
+			rootfs@200000 {
+				label = "rootfs";
+				reg = <0x200000 0x600000>;
+			};
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_pck0_as_mck: pck0_as_mck {
+			atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi0 {
+		pinctrl_spi0: spi0-0 {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs0: spi0_npcs0 {
+			atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi0_npcs1: spi0_npcs1 {
+			atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	spi1 {
+		pinctrl_spi1: spi1-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs0: spi1_npcs0 {
+			atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_npcs1: spi1_npcs1 {
+			atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
+	cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91boot@0 {
+			label = "at91boot";
+			reg = <0x0 0x4000>;
+		};
+
+		uenv@4000 {
+			label = "uboot-env";
+			reg = <0x4000 0x4000>;
+		};
+
+		uboot@8000 {
+			label = "uboot";
+			reg = <0x8000 0x3E000>;
+		};
+	};
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
+	cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
+	status = "okay";
+};
+
+&usart0 {
+	pinctrl-0 =
+		<&pinctrl_usart0
+		 &pinctrl_usart0_rts
+		 &pinctrl_usart0_cts
+		 &pinctrl_usart0_dtr_dsr
+		 &pinctrl_usart0_dcd
+		 &pinctrl_usart0_ri>;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <2>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts
index a9aef53ab764..9d26f9996348 100644
--- a/arch/arm/boot/dts/at91-qil_a9260.dts
+++ b/arch/arm/boot/dts/at91-qil_a9260.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
  *
  * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"
@@ -15,20 +14,11 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -40,6 +30,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
@@ -50,6 +52,7 @@
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot0_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -111,55 +114,74 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x20000>;
-			};
-
-			bareboxenv2@80000 {
-				label = "bareboxenv2";
-				reg = <0x80000 0x20000>;
-			};
-
-			oftree@a0000 {
-				label = "oftree";
-				reg = <0xa0000 0x20000>;
-			};
-
-			kernel@c0000 {
-				label = "kernel";
-				reg = <0xc0000 0x400000>;
-			};
-
-			rootfs@4c0000 {
-				label = "rootfs";
-				reg = <0x4c0000 0x7800000>;
-			};
-
-			data@7cc0000 {
-				label = "data";
-				reg = <0x7cc0000 0x8340000>;
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@a0000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@c0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4c0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7cc0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
 			};
 		};
 	};
@@ -176,18 +198,16 @@
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		user_pb {
+		button-user {
 			label = "user_pb";
 			gpios = <&pioB 10 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sam9_l9260.dts b/arch/arm/boot/dts/at91-sam9_l9260.dts
new file mode 100644
index 000000000000..2fb51b9aca2a
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9_l9260.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-sam9_l9260.dts - Device Tree file for Olimex SAM9-L9260 board
+ *
+ *  Copyright (C) 2016 Raashid Muhammed <raashidmuhammed@zilogic.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+
+/ {
+	model = "Olimex sam9-l9260";
+	compatible = "olimex,sam9-l9260", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					wp-gpios = <&pioC 4 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			macb0: ethernet@fffc4000 {
+				pinctrl-0 = <&pinctrl_macb_rmii &pinctrl_macb_rmii_mii_alt>;
+				phy-mode = "mii";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+				};
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <15000000>;
+					reg = <0>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				mmc0 {
+					pinctrl_board_mmc0: mmc0-board {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH	/* CD pin */
+							 AT91_PIOC 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* WP pin */
+					};
+				};
+			};
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+
+		usb0: ohci@500000 {
+			status = "okay";
+		};
+
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pwr_led {
+			label = "sam9-l9260:yellow:pwr";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		status_led {
+			label = "sam9-l9260:green:status";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sam9x60_curiosity.dts b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
new file mode 100644
index 000000000000..cb86a3a170ce
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60_curiosity.dts
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60_curiosity.dts - Device Tree file for Microchip SAM9X60 Curiosity board
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Durai Manickam KR <durai.manickamkr@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60 Curiosity";
+	compatible = "microchip,sam9x60-curiosity", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial2 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-user {
+			label = "PB_USER";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-red {
+			label = "red";
+			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioD 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioD 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+
+	vdd_1v8: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "VDD_1V8";
+	};
+
+	vdd_1v15: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1150000>;
+		regulator-min-microvolt = <1150000>;
+		regulator-name = "VDD_1V15";
+	};
+
+	vdd1_3v3: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VDD1_3V3";
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_lsb>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "disabled";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc-default {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg-default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1-rx-tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 */
+				 AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_lsb: ebi-data-lsb {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-nand {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0-twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx6_default: flx6-twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx7_default: flx7-usart {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+		};
+	};
+
+	gpio-keys {
+		pinctrl_key_gpio_default: pinctrl-key-gpio {
+			atmel,pins = <AT91_PIOA 29 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio-leds {
+			atmel,pins = <AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0-rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0-0 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0-1 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0-2 {
+			atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+
+		pinctrl_sdmmc0_cd: sdmmc0-cd {
+			atmel,pins =
+				<AT91_PIOA 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA 2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA 3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA 4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOA 27 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb-default {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	cd-gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	disable-wp;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA 27 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 18 GPIO_ACTIVE_HIGH
+			   &pioD 15 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
new file mode 100644
index 000000000000..5cd593028aff
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sam9x60ek.dts - Device Tree file for Microchip SAM9X60-EK board
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Sandeep Sheriker M <sandeepsheriker.mallikarjun@microchip.com>
+ */
+/dts-v1/;
+#include "sam9x60.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAM9X60-EK";
+	compatible = "microchip,sam9x60ek", "microchip,sam9x60", "atmel,at91sam9";
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c6;
+		serial1 = &uart5;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "SW1";
+			gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		red {
+			label = "red";
+			gpios = <&pioB 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioB 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioB 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_1v8: fixed-regulator-vdd_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_1v15: fixed-regulator-vdd_1v15 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_1V15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-always-on;
+	};
+
+	vdd1_3v3: fixed-regulator-vdd1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD1_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd2_3v3: regulator-fixed-vdd2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD2_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd1_3v3>;
+	vref-supply = <&vdd1_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_rx_tx>;
+	status = "disabled"; /* Conflict with dbgu. */
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_rx_tx>;
+	status = "okay";
+};
+
+&classd {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_classd_default>;
+	atmel,pwm-type = "diff";
+	atmel,non-overlap-time = <10>;
+	status = "okay";
+};
+
+&dbgu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_dbgu>;
+	status = "okay"; /* Conflict with can0. */
+};
+
+&ebi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ebi_addr_nand &pinctrl_ebi_data_0_7>;
+	status = "okay";
+
+	nand_controller: nand-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nand_oe_we &pinctrl_nand_cs &pinctrl_nand_rb>;
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <8>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				uboot@40000 {
+					label = "u-boot";
+					reg = <0x40000 0xc0000>;
+				};
+
+				ubootenvred@100000 {
+					label = "U-Boot Env Redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				ubootenv@140000 {
+					label = "U-Boot Env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x1f800000>;
+				};
+			};
+		};
+	};
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c0: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+			status = "okay";
+		};
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "disabled";
+
+	spi4: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "disabled";
+	};
+};
+
+&flx5 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx5_default>;
+		status = "okay";
+	};
+};
+
+&flx6 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx6_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		gpio_exp: mcp23008@20 {
+			compatible = "microchip,mcp23008";
+			reg = <0x20>;
+		};
+	};
+};
+
+&gpbr {
+	status = "okay";
+};
+
+&i2s {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s_default>;
+	#sound-dai-cells = <0>;
+	status = "disabled"; /* Conflict with QSPI. */
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_rmii>;
+	status = "okay";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+	};
+};
+
+&pinctrl {
+	adc {
+		pinctrl_adc_default: adc_default {
+			atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_adtrg_default: adtrg_default {
+			atmel,pins = <AT91_PIOB 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	dbgu {
+		pinctrl_dbgu: dbgu-0 {
+			atmel,pins = <AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				      AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+	};
+
+	i2s {
+		pinctrl_i2s_default: i2s {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SCK */
+				 AT91_PIOB 20 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SWS */
+				 AT91_PIOB 21 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDIN */
+				 AT91_PIOB 22 AT91_PERIPH_B AT91_PINCTRL_NONE		/* I2SDOUT */
+				 AT91_PIOB 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* I2SMCK */
+		};
+	};
+
+	qspi {
+		pinctrl_qspi: qspi {
+			atmel,pins =
+				<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_SLEWRATE_DIS
+				 AT91_PIOB 21 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 22 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 23 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOB 24 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	nand {
+		pinctrl_nand_oe_we: nand-oe-we-0 {
+			atmel,pins =
+				<AT91_PIOD 0 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 1 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_nand_rb: nand-rb-0 {
+			atmel,pins =
+				<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_nand_cs: nand-cs-0 {
+			atmel,pins =
+				<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	ebi {
+		pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 7 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 8 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 9 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 10 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 11 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 12 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 13 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+
+		pinctrl_ebi_data_0_15: ebi-data-msb-0 {
+			atmel,pins =
+				<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_ebi_addr_nand: ebi-addr-0 {
+			atmel,pins =
+				<AT91_PIOD 2 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)
+				 AT91_PIOD 3 AT91_PERIPH_A (AT91_PINCTRL_NONE | AT91_PINCTRL_SLEWRATE_DIS)>;
+		};
+	};
+
+	flexcom {
+		pinctrl_flx0_default: flx0_twi {
+			atmel,pins =
+				<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_flx4_default: flx4_spi {
+			atmel,pins =
+				<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE
+				 AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx5_default: flx5_uart {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_C AT91_PINCTRL_NONE
+				 AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 21 AT91_PERIPH_B AT91_PINCTRL_NONE
+				 AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_flx6_default: flx6_twi {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	classd {
+		pinctrl_classd_default: classd {
+			atmel,pins =
+				<AT91_PIOA 24 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 25 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN
+				 AT91_PIOA 26 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				 AT91_PIOA 27 AT91_PERIPH_C AT91_PINCTRL_PULL_DOWN>;
+		};
+	};
+
+	can0 {
+		pinctrl_can0_rx_tx: can0_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX0 */
+				 AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX0 */
+				 AT91_PIOD 20 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN0 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	can1 {
+		pinctrl_can1_rx_tx: can1_rx_tx {
+			atmel,pins =
+				<AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANRX1 RXD1 */
+				 AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE	/* CANTX1 TXD1 */
+				 AT91_PIOD 19 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN	/* Enable CAN1 mux */
+				 AT91_PIOD 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_DOWN>;	/* Enable CAN Transceivers */
+		};
+	};
+
+	macb0 {
+		pinctrl_macb0_rmii: macb0_rmii-0 {
+			atmel,pins =
+				<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB0 periph A */
+				 AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB1 periph A */
+				 AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB2 periph A */
+				 AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB3 periph A */
+				 AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
+				 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB5 periph A */
+				 AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB6 periph A */
+				 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB7 periph A */
+				 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB9 periph A */
+				 AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB10 periph A */
+		};
+	};
+
+	pwm0 {
+		pinctrl_pwm0_0: pwm0_0 {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_1: pwm0_1 {
+			atmel,pins = <AT91_PIOB 12 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_2: pwm0_2 {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_pwm0_3: pwm0_3 {
+			atmel,pins = <AT91_PIOB 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc0 {
+		pinctrl_sdmmc0_default: sdmmc0 {
+			atmel,pins =
+				<AT91_PIOA 17 AT91_PERIPH_A (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA17 CK  periph A with pullup */
+				 AT91_PIOA 16 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA16 CMD periph A with pullup */
+				 AT91_PIOA 15 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA15 DAT0 periph A */
+				 AT91_PIOA 18 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA18 DAT1 periph A with pullup */
+				 AT91_PIOA 19 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA19 DAT2 periph A with pullup */
+				 AT91_PIOA 20 AT91_PERIPH_A (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA20 DAT3 periph A with pullup */
+		};
+		pinctrl_sdmmc0_cd: sdmmc0_cd {
+			atmel,pins =
+				<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
+	gpio_keys {
+		pinctrl_key_gpio_default: pinctrl_key_gpio {
+			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb0 {
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	usb1 {
+		pinctrl_usb_default: usb_default {
+			atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	leds {
+		pinctrl_gpio_leds: gpio_leds {
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+}; /* pinctrl */
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_0 &pinctrl_pwm0_1 &pinctrl_pwm0_2 &pinctrl_pwm0_3>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default &pinctrl_sdmmc0_cd>;
+	status = "okay";
+	cd-gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+	disable-wp;
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled"; /* Conflict with flx4. */
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay"; /* Conflict with i2s. */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioD 15 GPIO_ACTIVE_HIGH
+			   &pioD 16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
new file mode 100644
index 000000000000..95ecb7d040a8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1.dtsi - Device Tree file for SAMA5D27 SoM1 board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Atmel SAMA5D27 SoM1";
+	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		sdmmc0: sdio-host@a0000000 {
+			microchip,sdcal-inverted;
+		};
+
+		apb {
+			qspi1: spi@f0024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi1_default>;
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <104000000>;
+					spi-cs-setup-ns = <7>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+
+				ethernet-phy@7 {
+					reg = <0x7>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PD31 IRQ_TYPE_LEVEL_LOW>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+				};
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi1_default: qspi1_default {
+					sck_cs {
+						pinmux = <PIN_PB5__QSPI1_SCK>,
+							 <PIN_PB6__QSPI1_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PB7__QSPI1_IO0>,
+							 <PIN_PB8__QSPI1_IO1>,
+							 <PIN_PB9__QSPI1_IO2>,
+							 <PIN_PB10__QSPI1_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PD9__GTXCK>,
+						 <PIN_PD10__GTXEN>,
+						 <PIN_PD11__GRXDV>,
+						 <PIN_PD12__GRXER>,
+						 <PIN_PD13__GRX0>,
+						 <PIN_PD14__GRX1>,
+						 <PIN_PD15__GTX0>,
+						 <PIN_PD16__GTX1>,
+						 <PIN_PD17__GMDC>,
+						 <PIN_PD18__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PD31__GPIO>;
+					bias-disable;
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
new file mode 100644
index 000000000000..52ddd0571f1c
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -0,0 +1,552 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
+ *
+ *  Copyright (c) 2017, Microchip Technology Inc.
+ *                2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2017 Cristian Birsan <cristian.birsan@microchip.com>
+ *                2017 Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_som1.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel SAMA5D27 SOM1 EK";
+	compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		serial1 = &uart4;	/* mikro BUS 1 */
+		serial2 = &uart2;	/* mikro BUS 2 */
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PA27 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			mmc-ddr-3_3v;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay";
+		};
+
+		apb {
+			isc: isc@f0008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
+			};
+
+			qspi1: spi@f0024000 {
+				status = "okay";
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				status = "okay";
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
+				status = "disabled"; /* Conflict with leds. */
+			};
+
+			flx1: flexcom@f8038000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c3: i2c@600 {
+					dmas = <0>, <0>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+					pinctrl-1 = <&pinctrl_i2c3_gpio>;
+					sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			shdwc@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "disabled"; /* Conflict with isc. */
+			};
+
+			uart4: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+				status = "okay";
+			};
+
+			flx3: flexcom@fc014000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "disabled";
+
+				uart8: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+
+				spi5: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx3_default>;
+					status = "disabled"; /* Conflict with isc. */
+				};
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+				status = "okay";
+
+				uart9: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with spi6 and i2c6. */
+				};
+
+				spi6: spi@400 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
+					status = "okay"; /* Conflict with uart5 and i2c6. */
+				};
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					status = "disabled"; /* Conflict with uart5 and spi6. */
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vddana>;
+				vref-supply = <&advref>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mikrobus1_an &pinctrl_mikrobus2_an>;
+
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				pinctrl_flx3_default: flx3_default {
+					pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+						 <PIN_PC19__FLEXCOM3_IO1>,
+						 <PIN_PC18__FLEXCOM3_IO2>,
+						 <PIN_PC21__FLEXCOM3_IO3>,
+						 <PIN_PC22__FLEXCOM3_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+                                        pinmux = <PIN_PD4__GPIO>,
+                                                 <PIN_PD5__GPIO>;
+                                        bias-disable;
+                                };
+
+
+				pinctrl_isc_base: isc_base {
+					pinmux = <PIN_PC21__ISC_PCK>,
+						 <PIN_PC22__ISC_VSYNC>,
+						 <PIN_PC23__ISC_HSYNC>,
+						 <PIN_PC24__ISC_MCK>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_8bit: isc_data_8bit {
+					pinmux = <PIN_PC20__ISC_D11>,
+						 <PIN_PC19__ISC_D10>,
+						 <PIN_PC18__ISC_D9>,
+						 <PIN_PC17__ISC_D8>,
+						 <PIN_PC16__ISC_D7>,
+						 <PIN_PC15__ISC_D6>,
+						 <PIN_PC14__ISC_D5>,
+						 <PIN_PC13__ISC_D4>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_9_10: isc_data_9_10 {
+					pinmux = <PIN_PC12__ISC_D3>,
+						 <PIN_PC11__ISC_D2>;
+					bias-disable;
+				};
+
+				pinctrl_isc_data_11_12: isc_data_11_12 {
+					pinmux = <PIN_PC10__ISC_D1>,
+						 <PIN_PC9__ISC_D0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA29__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PA10__GPIO>,
+						 <PIN_PB1__GPIO>,
+						 <PIN_PA31__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PC12__URXD3>,
+						 <PIN_PC13__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PA27__GPIO>,
+						 <PIN_PD19__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PD20__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_an: mikrobus1_an {
+					pinmux = <PIN_PD25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_an: mikrobus2_an {
+					pinmux = <PIN_PD26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_rst: mikrobus1_rst {
+					pinmux = <PIN_PB2__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_rst: mikrobus2_rst {
+					pinmux = <PIN_PA26__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+					pinmux = <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+					pinmux = <PIN_PC31__FLEXCOM4_IO3>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_spi: mikrobus_spi {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+					pinmux = <PIN_PB1__PWML1>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+					pinmux = <PIN_PA31__PWML0>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_int: mikrobus1_int {
+					pinmux = <PIN_PB0__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_int: mikrobus2_int {
+					pinmux = <PIN_PA25__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus1_uart: mikrobus1_uart {
+					pinmux = <PIN_PB3__URXD4>,
+						 <PIN_PB4__UTXD4>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus2_uart: mikrobus2_uart {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_mikrobus_i2c: mikrobus1_i2c {
+					pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+						 <PIN_PA23__FLEXCOM1_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c3_gpio: i2c3_gpio {
+					pinmux = <PIN_PA24__GPIO>,
+						 <PIN_PA23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_uart_default {
+					pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+						 <PIN_PC29__FLEXCOM4_IO1>,
+						 <PIN_PC30__FLEXCOM4_IO2>,
+						 <PIN_PC31__FLEXCOM4_IO3>,
+						 <PIN_PD0__FLEXCOM4_IO4>;
+					bias-disable;
+				};
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "USER";
+			gpios = <&pioA PIN_PA29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm0. */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vddin_3v3: fixed-regulator-vddin_3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDIN_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		status = "okay";
+	};
+
+	vddana: fixed-regulator-vddana {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VDDANA";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddin_3v3>;
+		status = "okay";
+	};
+
+	advref: fixed-regulator-advref {
+		compatible = "regulator-fixed";
+
+		regulator-name = "advref";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vddana>;
+		status = "okay";
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
new file mode 100644
index 000000000000..4617805c7748
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1.dtsi - Device Tree file for SAMA5D27 WLSOM1
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ * Author: Eugen Hristev <eugen.hristev@microcihp.com>
+ */
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1";
+	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		i2c0 = &i2c0;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-wilc1000";
+		reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+		powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&pinctrl_wilc_pwrseq>;
+		pinctrl-names = "default";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+
+	uart6: serial@200 {
+		pinctrl-0 = <&pinctrl_flx1_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_default>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	pinctrl-names = "default", "gpio";
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	mcp16502@5b {
+		compatible = "microchip,mcp16502";
+		reg = <0x5b>;
+		status = "okay";
+		lpm-gpios = <&pioBU 0 GPIO_ACTIVE_LOW>;
+
+		regulators {
+			vdd_3v3: VDD_IO {
+				regulator-name = "VDD_IO";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vddio_ddr: VDD_DDR {
+				regulator-name = "VDD_DDR";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1200000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_core: VDD_CORE {
+				regulator-name = "VDD_CORE";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			vdd_ddr: VDD_OTHER {
+				regulator-name = "VDD_OTHER";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-initial-mode = <2>;
+				regulator-allowed-modes = <2>, <4>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+					regulator-changeable-in-suspend;
+					regulator-mode = <4>;
+				};
+			};
+
+			LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-standby {
+					regulator-on-in-suspend;
+				};
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phy-mode = "rmii";
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PB24 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_macb0_phy_irq>;
+	};
+};
+
+&pmc {
+	atmel,osc-bypass;
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled";
+
+	qspi1_flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+		m25p,fast-read;
+		status = "disabled";
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x600000>;
+		};
+	};
+};
+
+&pioA {
+	pinctrl_flx1_default: flx1_usart_default {
+		pinmux = <PIN_PA24__FLEXCOM1_IO0>,
+			 <PIN_PA23__FLEXCOM1_IO1>,
+			 <PIN_PA25__FLEXCOM1_IO3>,
+			 <PIN_PA26__FLEXCOM1_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_default: i2c0_default {
+		pinmux = <PIN_PD21__TWD0>,
+			 <PIN_PD22__TWCK0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+		pinmux = <PIN_PD19__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PB14__GTXCK>,
+			 <PIN_PB15__GTXEN>,
+			 <PIN_PB16__GRXDV>,
+			 <PIN_PB17__GRXER>,
+			 <PIN_PB18__GRX0>,
+			 <PIN_PB19__GRX1>,
+			 <PIN_PB20__GTX0>,
+			 <PIN_PB21__GTX1>,
+			 <PIN_PB22__GMDC>,
+			 <PIN_PB23__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PB5__QSPI1_SCK>,
+			 <PIN_PB6__QSPI1_CS>,
+			 <PIN_PB7__QSPI1_IO0>,
+			 <PIN_PB8__QSPI1_IO1>,
+			 <PIN_PB9__QSPI1_IO2>,
+			 <PIN_PB10__QSPI1_IO3>;
+		bias-pull-up;
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd-data {
+			pinmux = <PIN_PA28__SDMMC1_CMD>,
+				 <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		conf-ck {
+			pinmux = <PIN_PA22__SDMMC1_CK>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_default: wilc_default {
+		conf-irq {
+			pinmux = <PIN_PB25__GPIO>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_wilc_pwrseq: wilc_pwrseq {
+		conf-ce-nrst {
+			pinmux = <PIN_PA27__GPIO>,
+				 <PIN_PA29__GPIO>;
+			bias-disable;
+		};
+
+		conf-rtcclk {
+			pinmux = <PIN_PB13__PCK1>;
+			bias-disable;
+		};
+	};
+};
+
+&sdmmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	no-1-8-v;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+
+	wilc: wifi@0 {
+		reg = <0>;
+		compatible = "microchip,wilc1000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wilc_default>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		clock-names = "rtc";
+		interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
+		interrupt-parent = <&pioA>;
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+		assigned-clock-rates = <32768>;
+	};
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
new file mode 100644
index 000000000000..e055b9e2fe34
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -0,0 +1,269 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d27_wlsom1_ek.dts - Device Tree file for SAMA5D27 WLSOM1 EK
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Nicolas Ferre <nicolas.ferre@microcihp.com>
+ */
+/dts-v1/;
+#include "at91-sama5d27_wlsom1.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Microchip SAMA5D27 WLSOM1 EK";
+	compatible = "microchip,sama5d27-wlsom1-ek", "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		serial1 = &uart6;	/* BT */
+		serial2 = &uart5;	/* mikro BUS 2 */
+		serial3 = &uart3;	/* mikro BUS 1 */
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER BUTTON";
+			gpios = <&pioA PIN_PB2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PA6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_3v3>;
+	vref-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default>;
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart5: serial@200 {
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&flx1 {
+	status = "okay";
+
+	uart6: serial@200 {
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay";
+	};
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&pioA {
+	/*
+	 * There is no real pinmux for ADC, if the pin
+	 * is not requested by another peripheral then
+	 * the muxing is done when channel is enabled.
+	 * Requesting pins for ADC is GPIO is
+	 * encouraged to prevent conflicts and to
+	 * disable bias in order to be in the same
+	 * state when the pin is not muxed to the adc.
+	 */
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD25__GPIO>,
+			 <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_usart_default {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PB2__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA6__GPIO>,
+			 <PIN_PA7__GPIO>,
+			 <PIN_PA8__GPIO>;
+		bias-pull-down;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA11__SDMMC0_VDDSEL>,
+				 <PIN_PA12__SDMMC0_WP>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_uart0_default: uart0_default {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_uart3_default: uart3_default {
+		pinmux = <PIN_PB11__URXD3>,
+			 <PIN_PB12__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_default: pwm0_default {
+		pinmux = <PIN_PA31__PWML0>,
+			 <PIN_PA30__PWMH0>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PA10__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PA16__GPIO>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default>;
+	status = "okay";
+};
+
+&qspi1 {
+	status = "okay";
+
+	qspi1_flash: flash@0 {
+		status = "okay";
+	};
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	mmc-ddr-3_3v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_default>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PA16 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+			   &pioA PIN_PA10 GPIO_ACTIVE_HIGH
+			   0
+			  >;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
new file mode 100644
index 000000000000..999adeca6f33
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
+ *
+ *  Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ *	Author: Radu Pirea & Razvan Stefanescu,
+ *		Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
+ *		Cristian Birsan <cristian.birsan@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D2-ICP";
+	compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
+		serial1 = &uart1;	/* mikro BUS 3 */
+		serial3 = &uart3;	/* mikro BUS 2 */
+		serial5 = &uart7;	/* flx2 */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "USER_PB1";
+			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_io_reg>;
+	vref-supply = <&vdd_io_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx0 { /* mikrobus2 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi2: spi@400 {
+		dmas = <0>, <0>;
+		cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: ksz8563@0 {
+			compatible = "microchip,ksz8563";
+			reg = <0>;
+			reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
+
+			spi-max-frequency = <500000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&macb0>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx2 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-0 = <&pinctrl_flx2_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay"; /* Conflict w/ qspi1. */
+	};
+};
+
+&flx3 { /* mikrobus1 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi5: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
+
+			regulators {
+				vdd_io_reg: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1250000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <2500000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+			};
+		};
+	};
+};
+
+&i2c0 { /* mikrobus i2c */
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	i2c-digital-filter;
+	i2c-digital-filter-width-ns = <35>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&pioA {
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD24__GPIO>,
+				<PIN_PD25__GPIO>,
+				<PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	/*
+	 * The ADTRG pin can work on any edge type.
+	 * In here it's being pulled up, so need to
+	 * connect it to ground to get an edge e.g.
+	 * Trigger can be configured on falling, rise
+	 * or any edge, and the pull-up can be changed
+	 * to pull-down or left floating according to
+	 * needs.
+	 */
+	pinctrl_adtrg_default: adtrg_default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+			 <PIN_PC29__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_gpio: i2c1_gpio {
+                pinmux = <PIN_PD19__GPIO>,
+                         <PIN_PD20__GPIO>;
+                bias-disable;
+        };
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PB0__GPIO>,
+			 <PIN_PB1__GPIO>,
+			 <PIN_PA31__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PA6__QSPI1_SCK>,
+			 <PIN_PA7__QSPI1_IO0>,
+			 <PIN_PA8__QSPI1_IO1>,
+			 <PIN_PA9__QSPI1_IO2>,
+			 <PIN_PA10__QSPI1_IO3>,
+			 <PIN_PA11__QSPI1_CS>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+				 <PIN_PA28__SDMMC1_CMD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_mikrobus_i2c: mikrobus_i2c {
+		pinmux = <PIN_PD22__TWCK0>,
+			 <PIN_PD21__TWD0>;
+		bias-disable;
+	};
+
+	pinctrl_i2c0_gpio: i2c0_gpio {
+		pinmux = <PIN_PD21__GPIO>,
+			 <PIN_PD22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_an: mikrobus1_an {
+		pinmux = <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_rst: mikrobus1_rst {
+		pinmux = <PIN_PC5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PC21__FLEXCOM3_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+			 <PIN_PC19__FLEXCOM3_IO1>,
+			 <PIN_PC18__FLEXCOM3_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+		pinmux = <PIN_PC4__TIOB1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_int: mikrobus1_int {
+		pinmux = <PIN_PC3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1_uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an: mikrobus2_an {
+		pinmux = <PIN_PD25__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_rst: mikrobus2_rst {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+		pinmux = <PIN_PB31__FLEXCOM0_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi: mikrobus2_spi {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>,
+			 <PIN_PB30__FLEXCOM0_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_ksz_spi_cs: ksz_spi_cs {
+		pinmux = <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+		pinmux = <PIN_PB23__TIOB2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_int: mikrobus2_int {
+		pinmux = <PIN_PB22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2_uart {
+		pinmux = <PIN_PC12__URXD3>,
+			 <PIN_PC13__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_an: mikrobus3_an {
+		pinmux = <PIN_PD24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_rst: mikrobus3_rst {
+		pinmux = <PIN_PB21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
+		pinmux = <PIN_PA17__SPI0_NPCS0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi: mikrobus3_spi {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA16__SPI0_MISO>,
+			 <PIN_PA15__SPI0_MOSI>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_pwm: mikrobus3_pwm {
+		pinmux = <PIN_PB20__TIOB3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_int: mikrobus3_int {
+		pinmux = <PIN_PB18__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_uart: mikrobus3_uart {
+		pinmux = <PIN_PC7__URXD1>,
+			 <PIN_PC8__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PC17__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PD23__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+		pinmux = <PIN_PB5__PWMH2>,
+			 <PIN_PB6__PWML2>;
+		bias-pull-up;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PD1__GRXCK>,
+			 <PIN_PD2__GTXER>,
+			 <PIN_PD5__GRX2>,
+			 <PIN_PD6__GRX3>,
+			 <PIN_PD7__GTX2>,
+			 <PIN_PD8__GTX3>,
+			 <PIN_PD9__GTXCK>,
+			 <PIN_PD10__GTXEN>,
+			 <PIN_PD11__GRXDV>,
+			 <PIN_PD12__GRXER>,
+			 <PIN_PD13__GRX0>,
+			 <PIN_PD14__GRX1>,
+			 <PIN_PD15__GTX0>,
+			 <PIN_PD16__GTX1>,
+			 <PIN_PD17__GMDC>,
+			 <PIN_PD18__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PD3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_rst: macb0_sw_rst {
+		pinmux = <PIN_PD4__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx2_default: flx2_default {
+		pinmux = <PIN_PA6__FLEXCOM2_IO0>,
+			 <PIN_PA7__FLEXCOM2_IO1>,
+			 <PIN_PA9__FLEXCOM2_IO3>,
+			 <PIN_PA10__FLEXCOM2_IO4>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+	status = "disabled"; /* conflict with leds, HSIC */
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <104000000>;
+		spi-cs-setup-ns = <7>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x00000000 0x00040000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x00040000 0x000c0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x00100000 0x00040000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x00140000 0x00040000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x00180000 0x00080000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x00200000 0x00600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	no-1-8-v;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	debounce-delay-us = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spi0 {  /* mikrobus3 spi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
new file mode 100644
index 000000000000..bf1c9ca72a9f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -0,0 +1,435 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR X11)
+/*
+ * at91-sama5d2_ptc_ek.dts - Device Tree file for SAMA5D2 PTC EK board
+ *
+ *  Copyright (C) 2017 Microchip/Atmel,
+ *		  2017 Wenyou Yang <wenyou.yang@microchip.com>
+ *		  2017 Ludovic Desroches <ludovic.desroches@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+
+/ {
+	model = "Atmel SAMA5D2 PTC EK";
+	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* DBGU */
+		i2c0 = &i2c0;	/* mikroBUS 1 */
+		i2c1 = &i2c1;	/* XPRO EXT1 */
+		i2c2 = &i2c2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioA PIN_PB12 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		ebi: ebi@10000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_nand_default>;
+			status = "okay"; /* conflicts with sdmmc1 and qspi0 */
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
+			};
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			status = "okay";
+		};
+
+		apb {
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <56 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart0: serial@f801c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart0_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			uart2: serial@f8024000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart2_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_flx0_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					status = "okay";
+				};
+			};
+
+			shdwc@f8048010 {
+				debounce-delay-us = <976>;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			spi1: spi@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi1_default>;
+				status = "okay";
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "atmel,24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
+			pinctrl@fc038000 {
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx0_gpio: flx0_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PC6__TWD1>,
+						 <PIN_PC7__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PC6__GPIO>,
+						 <PIN_PC7__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PA10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB6__GPIO>,
+						 <PIN_PB8__GPIO>,
+						 <PIN_PB10__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PB24__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_nand_default: nand_default {
+					re_we_data {
+						pinmux = <PIN_PA22__D0>,
+							 <PIN_PA23__D1>,
+							 <PIN_PA24__D2>,
+							 <PIN_PA25__D3>,
+							 <PIN_PA26__D4>,
+							 <PIN_PA27__D5>,
+							 <PIN_PA28__D6>,
+							 <PIN_PA29__D7>,
+							 <PIN_PA30__NWE_NANDWE>,
+							 <PIN_PB2__NRD_NANDOE>;
+						bias-pull-up;
+						atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+					};
+
+					ale_cle_rdy_cs {
+						pinmux = <PIN_PB0__A21_NANDALE>,
+							 <PIN_PB1__A22_NANDCLE>,
+							 <PIN_PC8__NANDRDY>,
+							 <PIN_PA31__NCS3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-pull-up;
+					};
+
+					ck_cd_vddsel {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA11__SDMMC0_VDDSEL>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_spi1_default: spi1_default {
+					pinmux = <PIN_PC1__SPI1_SPCK>,
+						 <PIN_PC2__SPI1_MOSI>,
+						 <PIN_PC3__SPI1_MISO>,
+						 <PIN_PC4__SPI1_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart0_default: uart0_default {
+					pinmux = <PIN_PB26__URXD0>,
+						 <PIN_PB27__UTXD0>;
+					bias-disable;
+				};
+
+				pinctrl_uart2_default: uart2_default {
+					pinmux = <PIN_PD23__URXD2>,
+						 <PIN_PD24__UTXD2>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PB11__GPIO>;
+					bias-disable;
+				};
+
+			};
+
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button-1 {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay";
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
new file mode 100644
index 000000000000..2d53c47d7cc8
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -0,0 +1,745 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_xplained.dts - Device Tree file for SAMA5D2 Xplained board
+ *
+ *  Copyright (C) 2015 Atmel,
+ *                2015 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+/ {
+	model = "Atmel SAMA5D2 Xplained";
+	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;		/* XPRO EXT2 */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		usb0: gadget@300000 {
+			atmel,vbus-gpio = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@400000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0 /* &pioA PIN_PB9 GPIO_ACTIVE_HIGH */
+					   &pioA PIN_PB10 GPIO_ACTIVE_HIGH
+					   0
+					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
+			status = "okay";
+		};
+
+		usb2: ehci@500000 {
+			status = "okay";
+		};
+
+		sdmmc0: sdio-host@a0000000 {
+			bus-width = <8>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc0_default>;
+			non-removable;
+			mmc-ddr-3_3v;
+			status = "okay";
+		};
+
+		sdmmc1: sdio-host@b0000000 {
+			bus-width = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_sdmmc1_default>;
+			status = "okay"; /* conflict with qspi0 */
+			vqmmc-supply = <&vdd_3v3_reg>;
+			vmmc-supply = <&vdd_3v3_reg>;
+		};
+
+		apb {
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_default>;
+				status = "disabled"; /* conflict with sdmmc1 */
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@0 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@40000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+
+					misc@800000 {
+						label = "misc";
+						reg = <0x00800000 0x00000000>;
+					};
+				};
+			};
+
+			spi0: spi@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_spi0_default>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					reg = <0>;
+					spi-max-frequency = <50000000>;
+				};
+			};
+
+			macb0: ethernet@f8008000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioA>;
+					interrupts = <PIN_PC9 IRQ_TYPE_LEVEL_LOW>;
+				};
+			};
+
+			tcb0: timer@f800c000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			uart1: serial@f8020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart1_default>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "okay";
+			};
+
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				pinctrl-1 = <&pinctrl_i2c0_gpio>;
+				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				i2c-sda-hold-time-ns = <350>;
+				status = "okay";
+
+				pmic@5b {
+					compatible = "active-semi,act8945a";
+					reg = <0x5b>;
+					active-semi,vsel-high;
+					status = "okay";
+
+					regulators {
+						vdd_1v35_reg: REG_DCDC1 {
+							regulator-name = "VDD_1V35";
+							regulator-min-microvolt = <1350000>;
+							regulator-max-microvolt = <1350000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-on-in-suspend;
+								regulator-suspend-min-microvolt = <1400000>;
+								regulator-suspend-max-microvolt = <1400000>;
+								regulator-changeable-in-suspend;
+								regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							};
+						};
+
+						vdd_1v2_reg: REG_DCDC2 {
+							regulator-name = "VDD_1V2";
+							regulator-min-microvolt = <1100000>;
+							regulator-max-microvolt = <1300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_reg: REG_DCDC3 {
+							regulator-name = "VDD_3V3";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_fuse_reg: REG_LDO1 {
+							regulator-name = "VDD_FUSE";
+							regulator-min-microvolt = <2500000>;
+							regulator-max-microvolt = <2500000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_3v3_lp_reg: REG_LDO2 {
+							regulator-name = "VDD_3V3_LP";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_led_reg: REG_LDO3 {
+							regulator-name = "VDD_LED";
+							regulator-min-microvolt = <3300000>;
+							regulator-max-microvolt = <3300000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+
+						vdd_sdhc_1v8_reg: REG_LDO4 {
+							regulator-name = "VDD_SDHC_1V8";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <1800000>;
+							regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+										  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+							regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+							regulator-always-on;
+
+							regulator-state-mem {
+								regulator-off-in-suspend;
+							};
+						};
+					};
+
+					charger {
+						compatible = "active-semi,act8945a-charger";
+						pinctrl-names = "default";
+						pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+						interrupt-parent = <&pioA>;
+						interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
+
+						active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+						active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+						active-semi,input-voltage-threshold-microvolt = <6600>;
+						active-semi,precondition-timeout = <40>;
+						active-semi,total-timeout = <3>;
+						status = "okay";
+					};
+				};
+			};
+
+			pwm0: pwm@f802c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+				status = "disabled"; /* conflict with leds */
+			};
+
+			flx0: flexcom@f8034000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+
+				uart5: serial@200 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					status = "okay";
+				};
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_i2c2_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-sda-hold-time-ns = <350>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+				};
+			};
+
+			shdwc@f8048010 {
+				debounce-delay-us = <976>;
+				atmel,wakeup-rtc-timer;
+
+				input@0 {
+					reg = <0>;
+				};
+			};
+
+			watchdog@f8048040 {
+				status = "okay";
+			};
+
+			i2s0: i2s@f8050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s0_default>;
+				status = "disabled"; /* conflict with can0 */
+			};
+
+			can0: can@f8054000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can0_default>;
+				status = "okay";
+			};
+
+			uart3: serial@fc008000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_uart3_default>;
+				status = "okay";
+			};
+
+			flx4: flexcom@fc018000 {
+				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+				status = "okay";
+
+				i2c6: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx4_default>;
+					pinctrl-1 = <&pinctrl_flx4_gpio>;
+					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "okay";
+				};
+			};
+
+			i2c1: i2c@fc028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default", "gpio";
+				pinctrl-0 = <&pinctrl_i2c1_default>;
+				i2c-analog-filter;
+				i2c-digital-filter;
+				i2c-digital-filter-width-ns = <35>;
+				pinctrl-1 = <&pinctrl_i2c1_gpio>;
+				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+				status = "okay";
+
+				at24@54 {
+					compatible = "atmel,24c02";
+					reg = <0x54>;
+					pagesize = <16>;
+				};
+			};
+
+			adc: adc@fc030000 {
+				vddana-supply = <&vdd_3v3_lp_reg>;
+				vref-supply = <&vdd_3v3_lp_reg>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+				status = "okay";
+			};
+
+			pinctrl@fc038000 {
+				/*
+				 * There is no real pinmux for ADC, if the pin
+				 * is not requested by another peripheral then
+				 * the muxing is done when channel is enabled.
+				 * Requesting pins for ADC is GPIO is
+				 * encouraged to prevent conflicts and to
+				 * disable bias in order to be in the same
+				 * state when the pin is not muxed to the adc.
+				 */
+				pinctrl_adc_default: adc_default {
+					pinmux = <PIN_PD23__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_can0_default: can0_default {
+					pinmux = <PIN_PC10__CANTX0>,
+						 <PIN_PC11__CANRX0>;
+					bias-disable;
+				};
+
+				pinctrl_can1_default: can1_default {
+					pinmux = <PIN_PC26__CANTX1>,
+						 <PIN_PC27__CANRX1>;
+					bias-disable;
+				};
+
+				/*
+				 * The ADTRG pin can work on any edge type.
+				 * In here it's being pulled up, so need to
+				 * connect it to ground to get an edge e.g.
+				 * Trigger can be configured on falling, rise
+				 * or any edge, and the pull-up can be changed
+				 * to pull-down or left floating according to
+				 * needs.
+				 */
+				pinctrl_adtrg_default: adtrg_default {
+					pinmux = <PIN_PD31__ADTRG>;
+					bias-pull-up;
+				};
+
+				pinctrl_charger_chglev: charger_chglev {
+					pinmux = <PIN_PA12__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_irq: charger_irq {
+					pinmux = <PIN_PB13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_charger_lbo: charger_lbo {
+					pinmux = <PIN_PC8__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_pfets: classd_default_pfets {
+					pinmux = <PIN_PB1__CLASSD_R0>,
+						 <PIN_PB3__CLASSD_R2>;
+					bias-pull-up;
+				};
+
+				pinctrl_classd_default_nfets: classd_default_nfets {
+					pinmux = <PIN_PB2__CLASSD_R1>,
+						 <PIN_PB4__CLASSD_R3>;
+					bias-pull-down;
+				};
+
+				pinctrl_flx0_default: flx0_default {
+					pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+						 <PIN_PB29__FLEXCOM0_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_default: flx4_default {
+					pinmux = <PIN_PD12__FLEXCOM4_IO0>,
+						 <PIN_PD13__FLEXCOM4_IO1>;
+					bias-disable;
+				};
+
+				pinctrl_flx4_gpio: flx4_gpio {
+					pinmux = <PIN_PD12__GPIO>,
+						 <PIN_PD13__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
+
+				pinctrl_i2c0_gpio: i2c0_gpio {
+					pinmux = <PIN_PD21__GPIO>,
+						 <PIN_PD22__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_default: i2c1_default {
+					pinmux = <PIN_PD4__TWD1>,
+						 <PIN_PD5__TWCK1>;
+					bias-disable;
+				};
+
+				pinctrl_i2c1_gpio: i2c1_gpio {
+					pinmux = <PIN_PD4__GPIO>,
+						 <PIN_PD5__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2c2_gpio: i2c2_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_i2s0_default: i2s0_default {
+					pinmux = <PIN_PC1__I2SC0_CK>,
+						 <PIN_PC2__I2SC0_MCK>,
+						 <PIN_PC3__I2SC0_WS>,
+						 <PIN_PC4__I2SC0_DI0>,
+						 <PIN_PC5__I2SC0_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_i2s1_default: i2s1_default {
+					pinmux = <PIN_PA15__I2SC1_CK>,
+						 <PIN_PA14__I2SC1_MCK>,
+						 <PIN_PA16__I2SC1_WS>,
+						 <PIN_PA17__I2SC1_DI0>,
+						 <PIN_PA18__I2SC1_DO0>;
+					bias-disable;
+				};
+
+				pinctrl_key_gpio_default: key_gpio_default {
+					pinmux = <PIN_PB9__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_led_gpio_default: led_gpio_default {
+					pinmux = <PIN_PB0__GPIO>,
+						 <PIN_PB5__GPIO>,
+						 <PIN_PB6__GPIO>;
+					bias-pull-up;
+				};
+
+				pinctrl_macb0_default: macb0_default {
+					pinmux = <PIN_PB14__GTXCK>,
+						 <PIN_PB15__GTXEN>,
+						 <PIN_PB16__GRXDV>,
+						 <PIN_PB17__GRXER>,
+						 <PIN_PB18__GRX0>,
+						 <PIN_PB19__GRX1>,
+						 <PIN_PB20__GTX0>,
+						 <PIN_PB21__GTX1>,
+						 <PIN_PB22__GMDC>,
+						 <PIN_PB23__GMDIO>;
+					bias-disable;
+				};
+
+				pinctrl_macb0_phy_irq: macb0_phy_irq {
+					pinmux = <PIN_PC9__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_qspi0_default: qspi0_default {
+					sck_cs {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+					};
+				};
+
+				pinctrl_sdmmc0_default: sdmmc0_default {
+					cmd_data {
+						pinmux = <PIN_PA1__SDMMC0_CMD>,
+							 <PIN_PA2__SDMMC0_DAT0>,
+							 <PIN_PA3__SDMMC0_DAT1>,
+							 <PIN_PA4__SDMMC0_DAT2>,
+							 <PIN_PA5__SDMMC0_DAT3>,
+							 <PIN_PA6__SDMMC0_DAT4>,
+							 <PIN_PA7__SDMMC0_DAT5>,
+							 <PIN_PA8__SDMMC0_DAT6>,
+							 <PIN_PA9__SDMMC0_DAT7>;
+						bias-disable;
+					};
+
+					ck_cd_rstn {
+						pinmux = <PIN_PA0__SDMMC0_CK>,
+							 <PIN_PA10__SDMMC0_RSTN>,
+							 <PIN_PA13__SDMMC0_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_sdmmc1_default: sdmmc1_default {
+					cmd_data {
+						pinmux = <PIN_PA28__SDMMC1_CMD>,
+							 <PIN_PA18__SDMMC1_DAT0>,
+							 <PIN_PA19__SDMMC1_DAT1>,
+							 <PIN_PA20__SDMMC1_DAT2>,
+							 <PIN_PA21__SDMMC1_DAT3>;
+						bias-disable;
+					};
+
+					conf-ck_cd {
+						pinmux = <PIN_PA22__SDMMC1_CK>,
+							 <PIN_PA30__SDMMC1_CD>;
+						bias-disable;
+					};
+				};
+
+				pinctrl_spi0_default: spi0_default {
+					pinmux = <PIN_PA14__SPI0_SPCK>,
+						 <PIN_PA15__SPI0_MOSI>,
+						 <PIN_PA16__SPI0_MISO>,
+						 <PIN_PA17__SPI0_NPCS0>;
+					bias-disable;
+				};
+
+				pinctrl_uart1_default: uart1_default {
+					pinmux = <PIN_PD2__URXD1>,
+						 <PIN_PD3__UTXD1>;
+					bias-disable;
+				};
+
+				pinctrl_uart3_default: uart3_default {
+					pinmux = <PIN_PB11__URXD3>,
+						 <PIN_PB12__UTXD3>;
+					bias-disable;
+				};
+
+				pinctrl_usb_default: usb_default {
+					pinmux = <PIN_PB10__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_usba_vbus: usba_vbus {
+					pinmux = <PIN_PA31__GPIO>;
+					bias-disable;
+				};
+
+				pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+					pinmux = <PIN_PB5__PWMH2>,
+						 <PIN_PB6__PWML2>;
+					bias-pull-up;
+				};
+			};
+
+			classd: classd@fc048000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_classd_default_pfets &pinctrl_classd_default_nfets>;
+				atmel,pwm-type = "diff";
+				atmel,non-overlap-time = <10>;
+				status = "okay";
+			};
+
+			i2s1: i2s@fc04c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2s1_default>;
+				status = "disabled"; /* conflict with spi0, sdmmc1 */
+			};
+
+			can1: can@fc050000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_can1_default>;
+				status = "okay";
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PB9 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		led-red {
+			label = "red";
+			gpios = <&pioA PIN_PB6 GPIO_ACTIVE_LOW>;
+		};
+
+
+		led-green {
+			label = "green";
+			gpios = <&pioA PIN_PB5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-blue {
+			label = "blue";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_eds.dts b/arch/arm/boot/dts/at91-sama5d3_eds.dts
new file mode 100644
index 000000000000..c287b03d768b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_eds.dts
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * at91-sama5d3_eds.dts - Device Tree file for the SAMA5D3 Ethernet
+ *    Development System board.
+ *
+ * Copyright (C) 2022 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Jerry Ray <jerry.ray@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "SAMA5D3 Ethernet Development System";
+	compatible = "microchip,sama5d3-eds", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio>;
+
+		button-3 {
+			label = "PB_USER";
+			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	vcc_3v3_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vcc_2v5_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v8_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+
+	vcc_1v2_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "mmc0-card-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&can0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	nand_controller: nand-controller {
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x2>;
+			atmel,rb = <0>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bootstrap";
+					reg = <0x0 0x40000>;
+				};
+
+				bootloader@40000 {
+					label = "bootloader";
+					reg = <0x40000 0xc0000>;
+				};
+
+				bootloaderenvred@100000 {
+					label = "bootloader env redundant";
+					reg = <0x100000 0x40000>;
+				};
+
+				bootloaderenv@140000 {
+					label = "bootloader env";
+					reg = <0x140000 0x40000>;
+				};
+
+				dtb@180000 {
+					label = "device tree";
+					reg = <0x180000 0x80000>;
+				};
+
+				kernel@200000 {
+					label = "kernel";
+					reg = <0x200000 0x600000>;
+				};
+
+				rootfs@800000 {
+					label = "rootfs";
+					reg = <0x800000 0x0f800000>;
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-0 = <&pinctrl_i2c2_pu>;
+	status = "okay";
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	vmmc-supply = <&vcc_mmc0_reg>;
+	vqmmc-supply = <&vcc_3v3_reg>;
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_i2c2_pu: i2c2-pu {
+			atmel,pins =
+				<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_key_gpio: key-gpio-0 {
+			atmel,pins =
+				<AT91_PIOE 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins =
+				<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for reset signal to the RGMII connector. */
+		pinctrl_rgmii_rstn: rgmii-rstn {
+			atmel,pins =
+				<AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+
+		/* Reserved for an interrupt line from the RMII and RGMII connectors. */
+		pinctrl_spi_irqn: spi-irqn {
+			atmel,pins =
+				<AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_spi0_cs: spi0-cs-default {
+			atmel,pins =
+				<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi1_cs: spi1-cs-default {
+			atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				      AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_usb_default: usb-default {
+			atmel,pins =
+				<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		/* Reserved for VBUS fault interrupt. */
+		pinctrl_vbusfault_irqn: vbusfault-irqn {
+			atmel,pins =
+				<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_vcc_mmc0_reg_gpio: vcc-mmc0-reg-gpio-default {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi0_cs>;
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default", "cs";
+	pinctrl-1 = <&pinctrl_spi1_cs>;
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioC 28 0>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&usb0 {	/* USB Device port with VBUS detection. */
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {	/* 3-port Host. First port is unused. */
+	atmel,vbus-gpio = <0
+			   &pioE 3 GPIO_ACTIVE_HIGH
+			   &pioE 4 GPIO_ACTIVE_HIGH
+			  >;
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
new file mode 100644
index 000000000000..14af1fd6d247
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d3_ksz9477_evb.dts
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2021 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+/dts-v1/;
+#include "sama5d36.dtsi"
+
+/ {
+	model = "EVB-KSZ9477";
+	compatible = "microchip,sama5d3-ksz9477-evb", "atmel,sama5d36",
+		     "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_vcc_mmc0: regulator-mmc0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mcc0_vcc>;
+		regulator-name = "mmc0-vcc";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-0 = <&pinctrl_i2c0_pu>;
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&mmc0 {
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3
+		     &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+		cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
+		disable-wp;
+		vmmc-supply = <&reg_vcc_mmc0>;
+		vqmmc-supply = <&reg_3v3>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 GPIO_ACTIVE_LOW>, <0>, <0>,
+		   <&pioD 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&pinctrl_spi_ksz>;
+	cs-gpios = <&pioC 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	switch@0 {
+		compatible = "microchip,ksz9477";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpha;
+		spi-cpol;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan1";
+				phy-mode = "internal";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan2";
+				phy-mode = "internal";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				phy-mode = "internal";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan4";
+				phy-mode = "internal";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan5";
+				phy-mode = "internal";
+			};
+
+			port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&macb0>;
+				phy-mode = "rgmii-txid";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pinctrl {
+	board {
+		pinctrl_i2c0_pu: i2c0-pu {
+			atmel,pins =
+				<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+				<AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_mmc0_cd: mmc0-cd {
+			atmel,pins = <AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_mcc0_vcc: mmc0-vcc {
+			atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_spi_ksz: spi-ksz {
+			atmel,pins =
+				<
+				/* SPI1_MISO */
+				AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+				/* SPI1_MOSI */
+				AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE
+				/* SPI1_SPCK */
+				AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE
+
+				/* SPI CS */
+				AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+				/* switch IRQ */
+				AT91_PIOB 28 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH
+				/* switch PME_N, SoC IN */
+				AT91_PIOC 30 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP
+				/* switch RST */
+				AT91_PIOC 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH
+				>;
+		};
+
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins =
+				<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index d81474e0bcd6..820033727088 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -1,13 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
  *
  *  Copyright (C) 2014 Atmel,
  *		  2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "sama5d36.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "SAMA5D3 Xplained";
@@ -17,7 +17,7 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -57,6 +57,8 @@
 			};
 
 			spi0: spi@f0004000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi0_cs>;
 				cs-gpios = <&pioD 13 0>, <0>, <0>, <&pioD 16 0>;
 				status = "okay";
 			};
@@ -65,6 +67,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@f0010000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			i2c0: i2c@f0014000 {
 				pinctrl-0 = <&pinctrl_i2c0_pu>;
 				status = "okay";
@@ -76,7 +90,7 @@
 				pmic: act8865@5b {
 					compatible = "active-semi,act8865";
 					reg = <0x5b>;
-					status = "okay";
+					status = "disabled";
 
 					regulators {
 						vcc_1v8_reg: DCDC_REG1 {
@@ -117,7 +131,7 @@
 			};
 
 			macb0: ethernet@f0028000 {
-				phy-mode = "rgmii";
+				phy-mode = "rgmii-rxid";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "okay";
@@ -157,14 +171,17 @@
 			};
 
 			spi1: spi@f8008000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioC 25 0>;
 				status = "okay";
 			};
 
 			adc0: adc@f8018000 {
+				atmel,adc-vref = <3300>;
+				atmel,adc-channels-used = <0xfe>;
 				pinctrl-0 = <
 					&pinctrl_adc0_adtrg
-					&pinctrl_adc0_ad0
 					&pinctrl_adc0_ad1
 					&pinctrl_adc0_ad2
 					&pinctrl_adc0_ad3
@@ -172,8 +189,6 @@
 					&pinctrl_adc0_ad5
 					&pinctrl_adc0_ad6
 					&pinctrl_adc0_ad7
-					&pinctrl_adc0_ad8
-					&pinctrl_adc0_ad9
 					>;
 				status = "okay";
 			};
@@ -232,104 +247,159 @@
 						atmel,pins =
 							<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PE9, conflicts with A9 */
 					};
-				};
-			};
-		};
-
-		nand0: nand@60000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
-
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			bootloader@40000 {
-				label = "bootloader";
-				reg = <0x40000 0x80000>;
-			};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 
-			bootloaderenv@c0000 {
-				label = "bootloader env";
-				reg = <0xc0000 0xc0000>;
-			};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOE 23 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 
-			dtb@180000 {
-				label = "device tree";
-				reg = <0x180000 0x80000>;
-			};
+					pinctrl_spi0_cs: spi0_cs_default {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins = <AT91_PIOC 25 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x0f800000>;
+					pinctrl_vcc_mmc0_reg_gpio: vcc_mmc0_reg_gpio_default {
+						atmel,pins = <AT91_PIOE 2 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
 			};
 		};
 
-		usb0: gadget@00500000 {
+		usb0: gadget@500000 {
 			atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>;	/* PE9, conflicts with A9 */
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};
 
-		usb1: ohci@00600000 {
+		usb1: ohci@600000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 3 GPIO_ACTIVE_LOW
 					   &pioE 4 GPIO_ACTIVE_LOW
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
-		usb2: ehci@00700000 {
+		usb2: ehci@700000 {
 			status = "okay";
 		};
+
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
+			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <4>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
+			};
+		};
 	};
 
-	vcc_mmc0_reg: fixedregulator@0 {
+	vcc_mmc0_reg: fixedregulator_mmc0 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc0_reg_gpio>;
 		gpio = <&pioE 2 GPIO_ACTIVE_LOW>;
 		regulator-name = "mmc0-card-supply";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		bp3 {
+		button {
 			label = "PB_USER";
 			gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
-			gpio-key,wakeup;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+		status = "okay";
 
-		d2 {
+		led-d2 {
 			label = "d2";
 			gpios = <&pioE 23 GPIO_ACTIVE_LOW>;	/* PE23, conflicts with A23, CTS2 */
 			linux,default-trigger = "heartbeat";
 		};
 
-		d3 {
-			label = "d3";
+		led-d3 {
+			label = "d3"; /* Conflict with EBI CS0, USART2 CTS. */
 			gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
 		};
 	};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
new file mode 100644
index 000000000000..fd1086f52b40
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+#include "sama5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4";
+	compatible = "aries,ma5d4", "denx,ma5d4", "atmel,sama5d4", "atmel,sama5";
+
+	memory@20000000 {
+		reg = <0x20000000 0x10000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+
+		clk20m: clk20m {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <20000000>;
+			clock-output-names = "clk20m";
+		};
+	};
+
+	ahb {
+		apb {
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7>;
+				vmmc-supply = <&vcc_mmc0_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					broken-cd;
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+
+				flash@0 {
+					compatible = "atmel,at25df321a";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			spi1: spi@fc018000 {
+				cs-gpios = <&pioB 22 0>, <&pioB 23 0>, <0>, <0>;
+				status = "okay";
+
+				can0: can@0 {
+					compatible = "microchip,mcp2515";
+					reg = <0>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <6 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+
+				can1: can@1 {
+					compatible = "microchip,mcp2515";
+					reg = <1>;
+					clocks = <&clk20m>;
+					interrupt-parent = <&pioE>;
+					interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+					spi-max-frequency = <10000000>;
+				};
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
+				atmel,adc-vref = <3300>;
+				status = "okay";
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+		};
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vcc_mmc0_reg: fixedregulator_mmc0 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 15 GPIO_ACTIVE_HIGH>;
+		regulator-name = "RST_n MCI0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+		regulator-boot-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
new file mode 100644
index 000000000000..8adf567f2f0f
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "at91-sama5d4_ma5d4.dtsi"
+
+/ {
+	model = "Aries/DENX MA5D4EVK";
+	compatible = "aries,ma5d4evk", "denx,ma5d4evk", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	ahb {
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "okay";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 14 GPIO_ACTIVE_LOW
+					  >;
+			status = "okay";
+		};
+
+		usb2: ehci@600000 {
+			status = "okay";
+		};
+
+		apb {
+			hlcdc: hlcdc@f0000000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				phy0: ethernet-phy@0 {
+					reg = <0>;
+				};
+			};
+
+			usart0: serial@f802c000 {
+				status = "okay";
+			};
+
+			usart1: serial@f8030000 {
+				status = "okay";
+			};
+
+			mmc1: mmc@fc000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
+				vmmc-supply = <&vcc_mmc1_reg>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <4>;
+					cd-gpios = <&pioE 5 0>;
+				};
+			};
+
+			adc0: adc@fc034000 {
+				atmel,adc-ts-wires = <4>;
+				atmel,adc-ts-pressure-threshold = <10000>;
+			};
+
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_mmc1_cd: mmc1_cd {
+						atmel,pins = <AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led-user1 {
+			label = "user1";
+			gpios = <&pioD 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "user2";
+			gpios = <&pioD 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user3 {
+			label = "user3";
+			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel: panel {
+		/* Actually Ampire 800480R2 */
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	vcc_mmc1_reg: fixedregulator_mmc1 {
+		compatible = "regulator-fixed";
+		gpio = <&pioE 17 GPIO_ACTIVE_LOW>;
+		regulator-name = "VDD MCI1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_reg>;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
index 22ad7c959103..95d701d13fef 100644
--- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts
@@ -1,73 +1,27 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
  *
  *  Copyright (C) 2015 Atmel,
  *                2015 Josh Wu <josh.wu@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 #include "sama5d4.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Atmel SAMA5D4 Xplained";
 	compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "ignore_loglevel earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x20000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -79,27 +33,26 @@
 
 	ahb {
 		apb {
-			spi0: spi@f8010000 {
-				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+			uart0: serial@f8004000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 				status = "okay";
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
 			};
 
 			i2c0: i2c@f8014000 {
+				i2c-digital-filter;
 				status = "okay";
 			};
 
 			macb0: ethernet@f8020000 {
 				phy-mode = "rmii";
 				status = "okay";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 
 				phy0: ethernet-phy@1 {
 					interrupt-parent = <&pioE>;
-					interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
 					reg = <1>;
 				};
 			};
@@ -118,6 +71,8 @@
 			};
 
 			usart3: serial@fc00c000 {
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
 				status = "okay";
 			};
 
@@ -126,11 +81,34 @@
 			};
 
 			spi1: spi@fc018000 {
+				pinctrl-names = "default", "cs";
+				pinctrl-1 = <&pinctrl_spi1_cs>;
 				cs-gpios = <&pioB 21 0>;
 				status = "okay";
 			};
 
+			tcb2: timer@fc024000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer1: timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
 				atmel,adc-vref = <3300>;
 				status = "okay";
 			};
@@ -149,105 +127,155 @@
 						atmel,pins =
 							<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
 					};
+					pinctrl_usb_default: usb_default {
+						atmel,pins =
+							<AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_key_gpio: key_gpio_0 {
 						atmel,pins =
 							<AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
 					};
+					pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_spi1_cs: spi1_cs_default {
+						atmel,pins =
+							<AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_gpio_leds: gpio_leds_default {
+						atmel,pins =
+							<AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+							 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+					pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
+						atmel,pins =
+							<AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 				};
 			};
 		};
 
-		usb0: gadget@00400000 {
+		usb0: gadget@400000 {
 			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};
 
-		usb1: ohci@00500000 {
+		usb1: ohci@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0
 					   &pioE 11 GPIO_ACTIVE_HIGH
 					   &pioE 14 GPIO_ACTIVE_HIGH
 					  >;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usb_default>;
 			status = "okay";
 		};
 
-		usb2: ehci@00600000 {
+		usb2: ehci@600000 {
 			status = "okay";
 		};
 
-		nand0: nand@80000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-on-flash-bbt;
-			atmel,has-pmecc;
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			bootloader@40000 {
-				label = "bootloader";
-				reg = <0x40000 0x80000>;
-			};
-
-			bootloaderenv@c0000 {
-				label = "bootloader env";
-				reg = <0xc0000 0xc0000>;
-			};
-
-			dtb@180000 {
-				label = "device tree";
-				reg = <0x180000 0x80000>;
-			};
-
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
+			nand_controller: nand-controller {
+				status = "okay";
 
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x0f800000>;
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0xc0000>;
+						};
+
+						bootloaderenvred@100000 {
+							label = "bootloader env redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						bootloaderenv@140000 {
+							label = "bootloader env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x1f800000>;
+						};
+					};
+				};
 			};
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
-			linux,code = <0x100>;
-			gpio-key,wakeup;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
-			status = "disabled";
+			default-state = "on";
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	vcc_3v3_reg: fixedregulator@0 {
+	vcc_3v3_reg: fixedregulator_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VCC 3V3";
 		regulator-min-microvolt = <3300000>;
@@ -256,12 +284,15 @@
 		regulator-always-on;
 	};
 
-	vcc_mmc1_reg: fixedregulator@1 {
+	vcc_mmc1_reg: fixedregulator_mmc1 {
 		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
 		gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
 		regulator-name = "VDD MCI1";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_3v3_reg>;
+		regulator-always-on;
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts
index d782f2926b73..20ac775059ca 100644
--- a/arch/arm/boot/dts/at91-sama5d4ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d4ek.dts
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * at91-sama5d4ek.dts - Device Tree file for SAMA5D4 Evaluation Kit
  *
  *  Copyright (C) 2014 Atmel,
  *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 #include "sama5d4.dtsi"
@@ -50,24 +13,14 @@
 	compatible = "atmel,sama5d4ek", "atmel,sama5d4", "atmel,sama5";
 
 	chosen {
-		bootargs = "ignore_loglevel earlyprintk";
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x20000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -79,27 +32,16 @@
 
 	ahb {
 		apb {
-			lcd_bus@f0000000 {
-				status = "okay";
-
-				lcd@f0000000 {
-					status = "okay";
-				};
-
-				lcdovl1@f0000140 {
-					status = "okay";
-				};
-
-				lcdovl2@f0000240 {
-					status = "okay";
-				};
-
-				lcdheo1@f0000340 {
-					status = "okay";
-				};
-			};
-
 			adc0: adc@fc034000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <
+					/* external trigger conflicts with USBA_VBUS */
+					&pinctrl_adc0_ad0
+					&pinctrl_adc0_ad1
+					&pinctrl_adc0_ad2
+					&pinctrl_adc0_ad3
+					&pinctrl_adc0_ad4
+					>;
 				/* The vref depends on JP22 of EK. If connect 1-2 then use 3.3V. connect 2-3 use 3.0V */
 				atmel,adc-vref = <3300>;
 				/*atmel,adc-ts-wires = <4>;*/	/* Set up ADC touch screen */
@@ -123,7 +65,7 @@
 			spi0: spi@f8010000 {
 				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
 				status = "okay";
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
@@ -136,14 +78,40 @@
 				wm8904: codec@1a {
 					compatible = "wlf,wm8904";
 					reg = <0x1a>;
-					clocks = <&pck2>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 10>;
 					clock-names = "mclk";
 				};
+
+				qt1070:keyboard@1b {
+					compatible = "qt1070";
+					reg = <0x1b>;
+					interrupt-parent = <&pioE>;
+					interrupts = <25 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_qt1070_irq>;
+					wakeup-source;
+				};
+
+				touchscreen@4c {
+					compatible = "atmel,maxtouch";
+					reg = <0x4c>;
+					interrupt-parent = <&pioE>;
+					interrupts = <24 0x0>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_mxt_ts>;
+				};
 			};
 
 			macb0: ethernet@f8020000 {
+				pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
 				phy-mode = "rmii";
 				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioE>;
+					interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+				};
 			};
 
 			mmc1: mmc@fc000000 {
@@ -169,12 +137,28 @@
 				status = "okay";
 			};
 
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			watchdog@fc068640 {
 				status = "okay";
 			};
 
 			pinctrl@fc06a000 {
 				board {
+					pinctrl_macb0_phy_irq: macb0_phy_irq {
+						atmel,pins =
+							<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
 					pinctrl_mmc0_cd: mmc0_cd {
 						atmel,pins =
 							<AT91_PIOE 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
@@ -195,18 +179,26 @@
 						atmel,pins =
 							<AT91_PIOE 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE13 gpio */
 					};
+					pinctrl_qt1070_irq: qt1070_irq {
+						atmel,pins =
+							<AT91_PIOE 25 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+					pinctrl_mxt_ts: mxt_irq {
+						atmel,pins =
+							<AT91_PIOE 24 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
 				};
 			};
 		};
 
-		usb0: gadget@00400000 {
+		usb0: gadget@400000 {
 			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
 		};
 
-		usb1: ohci@00500000 {
+		usb1: ohci@500000 {
 			num-ports = <3>;
 			atmel,vbus-gpio = <0 /* &pioE 10 GPIO_ACTIVE_LOW */
 					   &pioE 11 GPIO_ACTIVE_LOW
@@ -215,60 +207,79 @@
 			status = "okay";
 		};
 
-		usb2: ehci@00600000 {
+		usb2: ehci@600000 {
 			status = "okay";
 		};
 
-		nand0: nand@80000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-on-flash-bbt;
-			atmel,has-pmecc;
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
+				     &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
+				     &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
+			pinctrl-names = "default";
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			bootloader@40000 {
-				label = "bootloader";
-				reg = <0x40000 0x80000>;
-			};
-
-			bootloaderenv@c0000 {
-				label = "bootloader env";
-				reg = <0xc0000 0xc0000>;
-			};
-
-			dtb@180000 {
-				label = "device tree";
-				reg = <0x180000 0x80000>;
-			};
-
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
+			nand_controller: nand-controller {
+				status = "okay";
 
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x0f800000>;
+				nand@3 {
+					reg = <0x3 0x0 0x2>;
+					atmel,rb = <0>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
 			};
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_key_gpio>;
 
-		pb_user1 {
+		button {
 			label = "pb_user1";
 			gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -276,18 +287,18 @@
 		compatible = "gpio-leds";
 		status = "okay";
 
-		d8 {
+		led-d8 {
 			label = "d8";
 			/* PE28, conflicts with usart4 rts pin */
 			gpios = <&pioE 28 GPIO_ACTIVE_LOW>;
 		};
 
-		d9 {
+		led-d9 {
 			label = "d9";
 			gpios = <&pioE 9 GPIO_ACTIVE_HIGH>;
 		};
 
-		d10 {
+		led-d10 {
 			label = "d10";
 			gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
new file mode 100644
index 000000000000..aa5cc0e98bba
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ *  at91-sama7g5ek.dts - Device Tree file for SAMA7G5-EK board
+ *
+ *  Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries
+ *
+ *  Author: Eugen Hristev <eugen.hristev@microchip.com>
+ *  Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ *
+ */
+/dts-v1/;
+#include "sama7g5-pinfunc.h"
+#include "sama7g5.dtsi"
+#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/at91.h>
+#include <dt-bindings/sound/microchip,pdmc.h>
+
+/ {
+	model = "Microchip SAMA7G5-EK";
+	compatible = "microchip,sama7g5ek", "microchip,sama7g5", "microchip,sama7";
+
+	chosen {
+		bootargs = "rw root=/dev/mmcblk1p2 rootfstype=ext4 rootwait";
+		stdout-path = "serial0:115200n8";
+	};
+
+	aliases {
+		serial0 = &uart3;
+		serial1 = &uart4;
+		serial2 = &uart7;
+		serial3 = &uart0;
+		i2c0 = &i2c1;
+		i2c1 = &i2c8;
+		i2c2 = &i2c9;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioA PIN_PA12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* Conflict with pwm. */
+
+		red_led {
+			label = "red";
+			gpios = <&pioA PIN_PB8 GPIO_ACTIVE_HIGH>;
+		};
+
+		green_led {
+			label = "green";
+			gpios = <&pioA PIN_PA13 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue_led {
+			label = "blue";
+			gpios = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	/* 512 M */
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "sama7g5ek audio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		simple-audio-card,dai-link@0 {
+			reg = <0>;
+			cpu {
+				sound-dai = <&spdiftx>;
+			};
+			codec {
+				sound-dai = <&spdif_out>;
+			};
+		};
+		simple-audio-card,dai-link@1 {
+			reg = <1>;
+			cpu {
+				sound-dai = <&spdifrx>;
+			};
+			codec {
+				sound-dai = <&spdif_in>;
+			};
+		};
+	};
+
+	spdif_in: spdif-in {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dir";
+	};
+
+	spdif_out: spdif-out {
+		#sound-dai-cells = <0>;
+		compatible = "linux,spdif-dit";
+	};
+};
+
+&adc {
+	vddana-supply = <&vddout25>;
+	vref-supply = <&vddout25>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vddcpu>;
+};
+
+&qspi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <133000000>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "ospi: at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		bootloader@40000 {
+			label = "ospi: bootloader";
+			reg = <0x40000 0xc0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "ospi: bootloader env redundant";
+			reg = <0x100000 0x40000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "ospi: bootloader env";
+			reg = <0x140000 0x40000>;
+		};
+
+		dtb@180000 {
+			label = "ospi: device tree";
+			reg = <0x180000 0x80000>;
+		};
+
+		kernel@200000 {
+			label = "ospi: kernel";
+			reg = <0x200000 0x600000>;
+		};
+
+		rootfs@800000 {
+			label = "ospi: rootfs";
+			reg = <0x800000 0x7800000>;
+		};
+
+	};
+};
+
+&dma0 {
+	status = "okay";
+};
+
+&dma1 {
+	status = "okay";
+};
+
+&dma2 {
+	status = "okay";
+};
+
+&flx0 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "disabled";
+
+	uart0: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx0_default>;
+		status = "disabled";
+	};
+};
+
+&flx1 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c1: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+
+			regulators {
+				vdd_3v3: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <3300000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddioddr: VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcore: VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <1150000>;
+					regulator-max-microvolt = <1150000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1150000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vddcpu: VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <1050000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-ramp-delay = <3125>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-suspend-voltage = <1050000>;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				vldo1: LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				vldo2: LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+
+					regulator-state-standby {
+						regulator-suspend-voltage = <1800000>;
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx3 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart3: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx3_default>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart4: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+	};
+};
+
+&flx7 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx7_default>;
+		status = "okay";
+	};
+};
+
+&flx8 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c8: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c8_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx9 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c9: i2c@600 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c9_default>;
+		i2c-analog-filter;
+		i2c-digital-filter;
+		i2c-digital-filter-width-ns = <35>;
+		status = "okay";
+	};
+};
+
+&flx11 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi11: spi@400 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&gmac0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	ethernet-phy@7 {
+		reg = <0x7>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA31 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gmac1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
+	phy-mode = "rmii";
+	status = "okay"; /* Conflict with pdmc0. */
+
+	ethernet-phy@0 {
+		reg = <0x0>;
+		interrupt-parent = <&pioA>;
+		interrupts = <PIN_PA21 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2s0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2s0_default>;
+};
+
+&pdmc0 {
+	#sound-dai-cells = <0>;
+	microchip,mic-pos = <MCHP_PDMC_DS0 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 1 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_NEGATIVE>, /* MIC 2 */
+			    <MCHP_PDMC_DS0 MCHP_PDMC_CLK_POSITIVE>, /* MIC 3 */
+			    <MCHP_PDMC_DS1 MCHP_PDMC_CLK_POSITIVE>; /* MIC 4 */
+	status = "disabled"; /* Conflict with gmac1. */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pdmc0_default>;
+};
+
+&pioA {
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PD12__CANTX0>,
+			 <PIN_PD13__CANRX0 >;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PD14__CANTX1>,
+			 <PIN_PD15__CANRX1 >;
+		bias-disable;
+	};
+
+	pinctrl_flx0_default: flx0_default {
+		pinmux = <PIN_PE3__FLEXCOM0_IO0>,
+			 <PIN_PE4__FLEXCOM0_IO1>,
+			 <PIN_PE6__FLEXCOM0_IO3>,
+			 <PIN_PE7__FLEXCOM0_IO4>;
+		bias-disable;
+	};
+
+	pinctrl_flx3_default: flx3_default {
+		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
+			 <PIN_PD17__FLEXCOM3_IO1>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PD18__FLEXCOM4_IO0>,
+			 <PIN_PD19__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_flx7_default: flx7_default {
+		pinmux = <PIN_PC23__FLEXCOM7_IO0>,
+			 <PIN_PC24__FLEXCOM7_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_default: gmac0_default {
+		pinmux = <PIN_PA16__G0_TX0>,
+			 <PIN_PA17__G0_TX1>,
+			 <PIN_PA26__G0_TX2>,
+			 <PIN_PA27__G0_TX3>,
+			 <PIN_PA19__G0_RX0>,
+			 <PIN_PA20__G0_RX1>,
+			 <PIN_PA28__G0_RX2>,
+			 <PIN_PA29__G0_RX3>,
+			 <PIN_PA15__G0_TXEN>,
+			 <PIN_PA30__G0_RXCK>,
+			 <PIN_PA18__G0_RXDV>,
+			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_txck_default: gmac0_txck_default {
+		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
+		bias-pull-up;
+	};
+
+	pinctrl_gmac0_phy_irq: gmac0_phy_irq {
+		pinmux = <PIN_PA31__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_default: gmac1_default {
+		pinmux = <PIN_PD30__G1_TXCK>,
+			 <PIN_PD22__G1_TX0>,
+			 <PIN_PD23__G1_TX1>,
+			 <PIN_PD21__G1_TXEN>,
+			 <PIN_PD25__G1_RX0>,
+			 <PIN_PD26__G1_RX1>,
+			 <PIN_PD27__G1_RXER>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
+			 <PIN_PD29__G1_MDIO>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_phy_irq: gmac1_phy_irq {
+		pinmux = <PIN_PA21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PC9__FLEXCOM1_IO0>,
+			 <PIN_PC10__FLEXCOM1_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c8_default: i2c8_default {
+		pinmux = <PIN_PC14__FLEXCOM8_IO0>,
+			 <PIN_PC13__FLEXCOM8_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c9_default: i2c9_default {
+		pinmux = <PIN_PC18__FLEXCOM9_IO0>,
+			 <PIN_PC19__FLEXCOM9_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_i2s0_default: i2s0_default {
+		pinmux = <PIN_PB23__I2SMCC0_CK>,
+			 <PIN_PB24__I2SMCC0_WS>,
+			 <PIN_PB25__I2SMCC0_DOUT1>,
+			 <PIN_PB26__I2SMCC0_DOUT0>,
+			 <PIN_PB27__I2SMCC0_MCK>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PA12__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PA13__GPIO>,
+			 <PIN_PB8__GPIO>,
+			 <PIN_PD20__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_mikrobus1_an_default: mikrobus1_an_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an_default: mikrobus2_an_default {
+		pinmux = <PIN_PD1__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm2_default: mikrobus1_pwm2_default {
+		pinmux = <PIN_PA13__PWMH2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm3_default: mikrobus2_pwm3_default {
+		pinmux = <PIN_PD20__PWMH3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PB6__FLEXCOM11_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PB3__FLEXCOM11_IO0>,
+			 <PIN_PB4__FLEXCOM11_IO1>,
+			 <PIN_PB5__FLEXCOM11_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_pdmc0_default: pdmc0_default {
+		pinmux = <PIN_PD23__PDMC0_DS0>,
+			 <PIN_PD24__PDMC0_DS1>,
+			 <PIN_PD22__PDMC0_CLK>;
+		bias_disable;
+	};
+
+	pinctrl_qspi: qspi {
+		pinmux = <PIN_PB12__QSPI0_IO0>,
+			 <PIN_PB11__QSPI0_IO1>,
+			 <PIN_PB10__QSPI0_IO2>,
+			 <PIN_PB9__QSPI0_IO3>,
+			 <PIN_PB16__QSPI0_IO4>,
+			 <PIN_PB17__QSPI0_IO5>,
+			 <PIN_PB18__QSPI0_IO6>,
+			 <PIN_PB19__QSPI0_IO7>,
+			 <PIN_PB13__QSPI0_CS>,
+			 <PIN_PB14__QSPI0_SCK>,
+			 <PIN_PB15__QSPI0_SCKN>,
+			 <PIN_PB20__QSPI0_DQS>,
+			 <PIN_PB21__QSPI0_INT>;
+		bias-disable;
+		slew-rate = <0>;
+		atmel,drive-strength = <ATMEL_PIO_DRVSTR_ME>;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA3__SDMMC0_DAT0>,
+				 <PIN_PA4__SDMMC0_DAT1>,
+				 <PIN_PA5__SDMMC0_DAT2>,
+				 <PIN_PA6__SDMMC0_DAT3>,
+				 <PIN_PA7__SDMMC0_DAT4>,
+				 <PIN_PA8__SDMMC0_DAT5>,
+				 <PIN_PA9__SDMMC0_DAT6>,
+				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA2__SDMMC0_RSTN>,
+				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PB29__SDMMC1_CMD>,
+				 <PIN_PB31__SDMMC1_DAT0>,
+				 <PIN_PC0__SDMMC1_DAT1>,
+				 <PIN_PC1__SDMMC1_DAT2>,
+				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck_cd_rstn_vddsel {
+			pinmux = <PIN_PB30__SDMMC1_CK>,
+				 <PIN_PB28__SDMMC1_RSTN>,
+				 <PIN_PC5__SDMMC1_1V8SEL>,
+				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_sdmmc2_default: sdmmc2_default {
+		cmd_data {
+			pinmux = <PIN_PD3__SDMMC2_CMD>,
+				 <PIN_PD5__SDMMC2_DAT0>,
+				 <PIN_PD6__SDMMC2_DAT1>,
+				 <PIN_PD7__SDMMC2_DAT2>,
+				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+
+		ck {
+			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
+			bias-pull-up;
+		};
+	};
+
+	pinctrl_spdifrx_default: spdifrx_default {
+		pinmux = <PIN_PB0__SPDIF_RX>;
+		bias-disable;
+	};
+
+	pinctrl_spdiftx_default: spdiftx_default {
+		pinmux = <PIN_PB1__SPDIF_TX>;
+		bias-disable;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_pwm2_default &pinctrl_mikrobus2_pwm3_default>;
+	status = "disabled"; /* Conflict with leds. */
+};
+
+&rtt {
+	atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
+
+&sdmmc0 {
+	bus-width = <8>;
+	non-removable;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vldo1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&sdmmc1 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc2_default>;
+};
+
+&shdwc {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
+&spdifrx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdifrx_default>;
+	status = "okay";
+};
+
+&spdiftx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdiftx_default>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&trng {
+	status = "okay";
+};
+
+&vddout25 {
+	vin-supply = <&vdd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-smartkiz.dts b/arch/arm/boot/dts/at91-smartkiz.dts
new file mode 100644
index 000000000000..b76a6b5ac464
--- /dev/null
+++ b/arch/arm/boot/dts/at91-smartkiz.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2017-2018 Overkiz SAS
+ *   Author: Mickael Gardet <m.gardet@overkiz.com>
+ *           Kévin Raymond <k.raymond@overkiz.com>
+ *           Dorian Rocipon <d.rocipon@overkiz.com>
+ */
+/dts-v1/;
+#include "at91-kizboxmini-common.dtsi"
+
+/ {
+	model = "Overkiz SmartKiz";
+	compatible = "overkiz,smartkiz", "atmel,at91sam9g25",
+		     "atmel,at91sam9x5", "atmel,at91sam9";
+
+	clocks {
+		adc_op_clk {
+			status = "okay";
+		};
+	};
+
+	aliases {
+		serial5 = &uart0;
+	};
+
+	pio_keys {
+		hk_reset {
+			label = "HK_RESET";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_rf {
+			label = "POWER_RF";
+			gpios = <&pioA 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		power_wifi {
+			label = "POWER_WIFI";
+			gpios = <&pioA 21 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&pinctrl {
+	i2c1 {
+		pinctrl_i2c1: i2c1-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP
+				AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
+		};
+	};
+
+	adc0 {
+		pinctrl_adc0_ad0: adc0_ad0-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad5: adc0_ad5-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad6: adc0_ad6-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+		pinctrl_adc0_ad11: adc0_ad11-0 {
+			/* pull-up disable */
+			atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "disabled";
+};
+
+&macb0 {
+	status = "disabled";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&led_blue {
+	status = "okay";
+};
+
+&adc0 {
+	atmel,adc-vref = <2500>;
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad5
+		&pinctrl_adc0_ad6
+		&pinctrl_adc0_ad11
+	>;
+	atmel,adc-channels-used = <0x0861>;
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-som60.dtsi b/arch/arm/boot/dts/at91-som60.dtsi
new file mode 100644
index 000000000000..39474a112b16
--- /dev/null
+++ b/arch/arm/boot/dts/at91-som60.dtsi
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-som60.dtsi - Device Tree file for the SOM60 module
+ *
+ *  Copyright (C) 2018 Laird,
+ *		  2018 Ben Whitten <ben.whitten@lairdtech.com>
+ *
+ */
+#include "sama5d36.dtsi"
+
+/ {
+	model = "Laird SOM60";
+	compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x8000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins =
+				<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_mmc0_en: mmc0_en {
+			atmel,pins =
+				<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_nand0_wp: nand0_wp {
+			atmel,pins =
+				<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+		};
+
+		pinctrl_usb_vbus: usb_vbus {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+				/* Conflicts with USART2_SCK */
+		};
+
+		pinctrl_usart2_sck: usart2_sck {
+			atmel,pins =
+				<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_VBUS */
+		};
+
+		pinctrl_usb_oc: usb_oc {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART3_SCK */
+		};
+
+		pinctrl_usart3_sck: usart3_sck {
+			atmel,pins =
+				<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+				/* Conflicts with USB_OC */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+		   atmel,pins =
+				<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_geth_int: geth_int {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+				/* Conflicts with USART1_SCK */
+		};
+
+		pinctrl_usart1_sck: usart1_sck {
+			atmel,pins =
+				<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+				/* Conflicts with GETH_INT */
+		};
+
+		pinctrl_eth_int: eth_int {
+			atmel,pins =
+				<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+		};
+
+		pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+		};
+	};
+};
+
+&mmc0 {
+	slot@0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+&usart1 {
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+};
+
+&usart2 {
+	pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
+};
+
+&usart3 {
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+};
+
+&adc0 {
+	pinctrl-0 = <
+		&pinctrl_adc0_adtrg
+		&pinctrl_adc0_ad0
+		&pinctrl_adc0_ad1
+		&pinctrl_adc0_ad2
+		&pinctrl_adc0_ad3
+		&pinctrl_adc0_ad4
+		&pinctrl_adc0_ad5
+		>;
+};
+
+&macb0 {
+	phy-mode = "rgmii";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ubootspl@0 {
+				label = "u-boot-spl";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			ubi@e0000 {
+				label = "ubi";
+				reg = <0xe0000 0xfe00000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
+	num-ports = <3>;
+	atmel,vbus-gpio = <0
+		&pioE 20 GPIO_ACTIVE_HIGH
+		0>;
+	atmel,oc-gpio = <0
+		&pioE 15 GPIO_ACTIVE_LOW
+		0>;
+};
diff --git a/arch/arm/boot/dts/at91-tse850-3.dts b/arch/arm/boot/dts/at91-tse850-3.dts
new file mode 100644
index 000000000000..b99a4fb44a36
--- /dev/null
+++ b/arch/arm/boot/dts/at91-tse850-3.dts
@@ -0,0 +1,302 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
+ *
+ * Copyright (C) 2017 Axentia Technologies AB
+ *
+ * Author: Peter Rosin <peda@axentia.se>
+ */
+/dts-v1/;
+#include <dt-bindings/pwm/pwm.h>
+#include "at91-linea.dtsi"
+
+/ {
+	model = "Axentia TSE-850 3.0";
+	compatible = "axentia,tse850v3", "axentia,linea",
+		     "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	sck: oscillator {
+		compatible = "fixed-clock";
+
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "sck";
+	};
+
+	reg_3v3: regulator {
+		compatible = "regulator-fixed";
+
+		regulator-name = "3v3-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	ana: reg-ana {
+		compatible = "pwm-regulator";
+
+		regulator-name = "ANA";
+
+		pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
+		pwm-dutycycle-unit = <1000>;
+		pwm-dutycycle-range = <100 1000>;
+
+		regulator-min-microvolt = <2000000>;
+		regulator-max-microvolt = <20000000>;
+		regulator-ramp-delay = <1000>;
+	};
+
+	sound {
+		compatible = "axentia,tse850-pcm5142";
+
+		axentia,cpu-dai = <&ssc0>;
+		axentia,audio-codec = <&pcm5142>;
+
+		axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
+		axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+		axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
+
+		axentia,ana-supply = <&ana>;
+	};
+
+	dac: dpot-dac {
+		compatible = "dpot-dac";
+		vref-supply = <&reg_3v3>;
+		io-channels = <&dpot 0>;
+		io-channel-names = "dpot";
+		#io-channel-cells = <1>;
+	};
+
+	env_det: envelope-detector {
+		compatible = "axentia,tse850-envelope-detector";
+		io-channels = <&dac 0>;
+		io-channel-names = "dac";
+		#io-channel-cells = <1>;
+
+		interrupt-parent = <&pioA>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "comp";
+	};
+
+	mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>,
+			    <&pioA 2 GPIO_ACTIVE_HIGH>;
+		idle-state = <0>;
+	};
+
+	envelope-detector-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&env_det 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "", "",
+			 "sync-1",
+			 "in",
+			 "out",
+			 "sync-2",
+			 "sys-reg",
+			 "ana-reg";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-ch1-red {
+			label = "ch-1:red";
+			gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
+		};
+		led-ch1-green {
+			label = "ch-1:green";
+			gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-red {
+			label = "ch-2:red";
+			gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
+		};
+		led-ch2-green {
+			label = "ch-2:green";
+			gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
+		};
+		led-data-red {
+			label = "data:red";
+			gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
+		};
+		led-data-green {
+			label = "data:green";
+			gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-red {
+			label = "alarm:red";
+			gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
+		};
+		led-alarm-green {
+			label = "alarm:green";
+			gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&nand {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		at91bootstrap@0 {
+			label = "at91bootstrap";
+			reg = <0x0 0x40000>;
+		};
+
+		barebox@40000 {
+			label = "bootloader";
+			reg = <0x40000 0x60000>;
+		};
+
+		bareboxenv@c0000 {
+			label = "bareboxenv";
+			reg = <0xc0000 0x40000>;
+		};
+
+		bareboxenv2@100000 {
+			label = "bareboxenv2";
+			reg = <0x100000 0x40000>;
+		};
+
+		oftree@180000 {
+			label = "oftree";
+			reg = <0x180000 0x20000>;
+		};
+
+		kernel@200000 {
+			label = "kernel";
+			reg = <0x200000 0x500000>;
+		};
+
+		rootfs@800000 {
+			label = "rootfs";
+			reg = <0x800000 0x0f800000>;
+		};
+
+		ovlfs@10000000 {
+			label = "ovlfs";
+			reg = <0x10000000 0x10000000>;
+		};
+	};
+};
+
+&ssc0 {
+	#sound-dai-cells = <0>;
+
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42@18 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x18>;
+		smbus-timeout-disable;
+	};
+
+	dpot: mcp4651-104@28 {
+		compatible = "microchip,mcp4651-104";
+		reg = <0x28>;
+		#io-channel-cells = <1>;
+	};
+
+	pcm5142: pcm5142@4c {
+		compatible = "ti,pcm5142";
+
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+
+		AVDD-supply = <&reg_3v3>;
+		DVDD-supply = <&reg_3v3>;
+		CPVDD-supply = <&reg_3v3>;
+
+		clocks = <&sck>;
+
+		pll-in = <3>;
+		pll-out = <6>;
+	};
+
+	eeprom@50 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&pinctrl {
+	tse850 {
+		pinctrl_usba_vbus: usba-vbus {
+			atmel,pins = <AT91_PIOC 31 AT91_PERIPH_GPIO
+				      AT91_PINCTRL_DEGLITCH>;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+
+	atmel,use-dma-rx;
+};
+
+&pwm0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
+	pinctrl-names = "default";
+};
+
+&macb1 {
+	status = "okay";
+
+	phy-mode = "rmii";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	phy0: ethernet-phy@3 {
+		reg = <3>;
+
+		interrupt-parent = <&pioE>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usb1 {
+	status = "okay";
+
+	num-ports = <1>;
+	atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
+	atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
+};
+
+&usb2 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts
new file mode 100644
index 000000000000..ebeaa6ab500e
--- /dev/null
+++ b/arch/arm/boot/dts/at91-vinco.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for VInCo platform
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *   2015 Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+/dts-v1/;
+#include "sama5d4.dtsi"
+
+/ {
+	model = "L+G VInCo platform";
+	compatible = "l+g,vinco", "atmel,sama5d4", "atmel,sama5";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	ahb {
+		apb {
+
+			adc0: adc@fc034000 {
+				status = "okay"; /* Enable ADC IIO support */
+			};
+
+			mmc0: mmc@f8000000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0
+					     &pinctrl_mmc0_dat1_3
+					     &pinctrl_mmc0_dat4_7>;
+				vqmmc-supply = <&vcc_3v3_reg>;
+				vmmc-supply = <&vcc_3v3_reg>;
+				no-1-8-v;
+				status = "okay";
+				slot@0 {
+					reg = <0>;
+					bus-width = <8>;
+					non-removable;
+					broken-cd;
+					status = "okay";
+				};
+			};
+
+			spi0: spi@f8010000 {
+				cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
+				status = "okay";
+				flash@0 {
+					compatible = "n25q32b", "jedec,spi-nor";
+					spi-max-frequency = <50000000>;
+					reg = <0>;
+				};
+			};
+
+			i2c0: i2c@f8014000 {
+				status = "okay";
+			};
+
+			i2c1: i2c@f8018000 {
+				status = "okay";
+				/* kerkey security module */
+			};
+
+			macb0: ethernet@f8020000 {
+				phy-mode = "rmii";
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>;
+					interrupt-parent = <&pioB>;
+					interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+				};
+
+			};
+
+			i2c2: i2c@f8024000 {
+				status = "okay";
+
+				rtc1: rtc@32 {
+					compatible = "epson,rx8900";
+					reg = <0x32>;
+				};
+			};
+
+			usart2: serial@fc008000 {
+				/* MBUS */
+				status = "okay";
+			};
+
+			usart3: serial@fc00c000 {
+				/* debug */
+				status = "okay";
+			};
+
+			usart4: serial@fc010000 {
+				/* LMN */
+				pinctrl-0 = <&pinctrl_usart4 &pinctrl_usart4_rts>;
+				linux,rs485-enabled-at-boot-time;
+				status = "okay";
+			};
+
+			tcb2: timer@fc024000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
+			macb1: ethernet@fc028000 {
+				phy-mode = "rmii";
+				status = "okay";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "okay";
+
+				ethernet-phy@1 {
+					reg = <0x1>;
+					interrupt-parent = <&pioB>;
+					interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+					reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>;
+				};
+			};
+
+			watchdog@fc068640 {
+				status = "okay";
+			};
+
+			pinctrl@fc06a000 {
+				board {
+					pinctrl_usba_vbus: usba_vbus {
+						atmel,pins =
+						<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
+					};
+				};
+			};
+		};
+
+		usb0: gadget@400000 {
+			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usba_vbus>;
+			status = "disable";
+		};
+
+		usb1: ohci@500000 {
+			num-ports = <3>;
+			atmel,vbus-gpio = <0
+					   &pioE 11 GPIO_ACTIVE_LOW
+					   &pioE 12 GPIO_ACTIVE_LOW
+					  >;
+			status = "disable";
+		};
+
+		usb2: ehci@600000 {
+			/* 4G Modem */
+			status = "okay";
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		status = "okay";
+
+		led_err {
+			label = "err";
+			gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_rssi {
+			label = "rssi";
+			gpios = <&pioA 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_tls {
+			label = "tls";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_lmc {
+			label = "lmc";
+			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_wmt {
+			label = "wmt";
+			gpios = <&pioA 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led_pwr {
+			label = "pwr";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+	};
+
+	vcc_3v3_reg: fixedregulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC 3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
diff --git a/arch/arm/boot/dts/at91-wb45n.dts b/arch/arm/boot/dts/at91-wb45n.dts
new file mode 100644
index 000000000000..ef73f727f7bd
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dts - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+/dts-v1/;
+#include "at91-wb45n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "IRQBTN";
+			linux,code = <99>;
+			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&macb0 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&usart0 {
+	status = "okay";
+};
+
+&usart3 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-wb45n.dtsi b/arch/arm/boot/dts/at91-wb45n.dtsi
new file mode 100644
index 000000000000..430c75358086
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb45n.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb45n.dtsi - Device Tree file for WB45NBT board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "at91sam9g25.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
+	compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	atheros {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+	};
+};
+
+&reset_controller {
+	compatible = "atmel,sama5d3-rstc";
+};
+
+&shutdown_controller {
+	atmel,wakeup-mode = "low";
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&ebi {
+	status = "okay";
+	nand_controller: nand-controller {
+		pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		nand@3 {
+			reg = <0x3 0x0 0x800000>;
+			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+			nand-bus-width = <8>;
+			nand-ecc-mode = "hw";
+			nand-ecc-strength = <4>;
+			nand-ecc-step-size = <512>;
+			nand-on-flash-bbt;
+			label = "atmel_nand";
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				at91bootstrap@0 {
+					label = "at91bs";
+					reg = <0x0 0x20000>;
+				};
+
+				uboot@20000 {
+					label = "u-boot";
+					reg = <0x20000 0x80000>;
+				};
+
+				ubootenv@a0000 {
+					label = "u-boot-env";
+					reg = <0xa0000 0x20000>;
+				};
+
+				ubootenv@c0000 {
+					label = "redund-env";
+					reg = <0xc0000 0x20000>;
+				};
+
+				kernel-a@e0000 {
+					label = "kernel-a";
+					reg = <0xe0000 0x280000>;
+				};
+
+				kernel-b@360000 {
+					label = "kernel-b";
+					reg = <0x360000 0x280000>;
+				};
+
+				rootfs-a@5e0000 {
+					label = "rootfs-a";
+					reg = <0x5e0000 0x2600000>;
+				};
+
+				rootfs-b@2be0000 {
+					label = "rootfs-b";
+					reg = <0x2be0000 0x2600000>;
+				};
+
+				user@51e0000 {
+					label = "user";
+					reg = <0x51e0000 0x2dc0000>;
+				};
+
+				logs@7fa0000 {
+					label = "logs";
+					reg = <0x7fa0000 0x60000>;
+				};
+
+			};
+		};
+	};
+};
+
+&usb0 {
+	num-ports = <2>;
+	atmel,vbus-gpio = <
+		&pioB 12 GPIO_ACTIVE_HIGH
+		&pioA 31 GPIO_ACTIVE_HIGH
+		>;
+	atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+};
+
+&macb0 {
+	phy-mode = "rmii";
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&pinctrl {
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB11 gpio vbus sense, deglitch */
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/at91-wb50n.dts b/arch/arm/boot/dts/at91-wb50n.dts
new file mode 100644
index 000000000000..ec2becf6133b
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dts
@@ -0,0 +1,102 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dts - Device Tree file for wb50n evaluation board
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+/dts-v1/;
+#include "at91-wb50n.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			label = "BTNESC";
+			linux,code = <1>; /* ESC button */
+			gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-1 {
+			label = "IRQBTN";
+			linux,code = <99>; /* SysReq button */
+			gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "wb50n:blue:led0";
+			gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "wb50n:green:led1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "wb50n:red:led2";
+			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+};
+
+&macb1 {
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	status = "okay";
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};
+
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
new file mode 100644
index 000000000000..74b249bb6351
--- /dev/null
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -0,0 +1,194 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
+ *
+ *  Copyright (C) 2018 Laird
+ *
+ */
+
+#include "sama5d31.dtsi"
+
+/ {
+	model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
+	compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
+
+	chosen {
+		bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_mmc0_cd: mmc0_cd {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
+		};
+
+		pinctrl_usba_vbus: usba_vbus {
+			atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
+		};
+	};
+};
+
+&slow_xtal {
+	clock-frequency = <32768>;
+};
+
+&main_xtal {
+	clock-frequency = <12000000>;
+};
+
+&clk32k {
+	atmel,osc-bypass;
+};
+
+&mmc0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
+	cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
+	status = "okay";
+	atheros@0 {
+		compatible = "atheros,ath6kl";
+		atheros,board-id = "SD32";
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&macb1 {
+	phy-mode = "rmii";
+};
+
+&dbgu {
+	dmas = <0>, <0>;	/*  Do not use DMA for dbgu */
+};
+
+/* On BB40 this port is labeled UART1 */
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
+};
+
+/* On BB40 this port is labeled UART0 */
+&usart1 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
+	dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
+	dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
+};
+
+/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
+&usart3 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
+	status = "okay";
+};
+
+&spi1 {
+	cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
+};
+
+&ebi {
+	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand: nand@3 {
+		reg = <0x3 0x0 0x2>;
+		atmel,rb = <0>;
+		nand-bus-width = <8>;
+		nand-ecc-mode = "hw";
+		nand-ecc-strength = <8>;
+		nand-ecc-step-size = <512>;
+		nand-on-flash-bbt;
+		label = "atmel_nand";
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			at91bootstrap@0 {
+				label = "at91bs";
+				reg = <0x0 0x20000>;
+			};
+
+			uboot@20000 {
+				label = "u-boot";
+				reg = <0x20000 0x80000>;
+			};
+
+			ubootenv@a0000 {
+				label = "u-boot-env";
+				reg = <0xa0000 0x20000>;
+			};
+
+			ubootenv@c0000 {
+				label = "u-boot-env";
+				reg = <0xc0000 0x20000>;
+			};
+
+			kernel-a@e0000 {
+				label = "kernel-a";
+				reg = <0xe0000 0x500000>;
+			};
+
+			kernel-b@5e0000 {
+				label = "kernel-b";
+				reg = <0x5e0000 0x500000>;
+			};
+
+			rootfs-a@ae0000 {
+				label = "rootfs-a";
+				reg = <0xae0000 0x3000000>;
+			};
+
+			rootfs-b@3ae0000 {
+				label = "rootfs-b";
+				reg = <0x3ae0000 0x3000000>;
+			};
+
+			user@6ae0000 {
+				label = "user";
+				reg = <0x6ae0000 0x14e0000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+};
+
+&usb1 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
+	atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index e3cfb9972f54..6f9004ebf424 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91rm9200.dtsi - Device Tree Include file for AT91RM9200 family SoC
  *
@@ -6,17 +7,17 @@
  *                2012 Joachim Eastwood <manabian@gmail.com>
  *
  * Based on at91sam9260.dtsi
- *
- * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91RM9200 family SoC";
 	compatible = "atmel,at91rm9200";
 	interrupt-parent = <&aic>;
@@ -39,16 +40,18 @@
 		ssc2 = &ssc2;
 	};
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm920t";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 
@@ -66,9 +69,12 @@
 		};
 	};
 
-	sram: sram@00200000 {
+	sram: sram@200000 {
 		compatible = "mmio-sram";
 		reg = <0x00200000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00200000 0x4000>;
 	};
 
 	ahb {
@@ -97,268 +103,19 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0>,
-								<150000000 180000000 2>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0>,
-								<150000000 180000000 2>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 80000000>;
-					atmel,clk-divisors = <1 2 3 4>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 0 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-
-					prog3: prog3 {
-						#clock-cells = <0>;
-						reg = <3>;
-						interrupts = <AT91_PMC_PCKRDY(3)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&usb>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-
-					pck3: pck3 {
-						#clock-cells = <0>;
-						reg = <11>;
-						clocks = <&prog3>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioD_clk: pioD_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <12>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc2_clk: ssc2_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					tc3_clk: tc3_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					tc4_clk: tc4_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					tc5_clk: tc5_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
 			};
 
 			st: timer@fffffd00 {
 				compatible = "atmel,at91rm9200-st", "syscon", "simple-mfd";
 				reg = <0xfffffd00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 
 				watchdog {
 					compatible = "atmel,at91rm9200-wdt";
@@ -369,27 +126,32 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffe00 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				status = "disabled";
 			};
 
 			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffa4000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfffa4000 0x100>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
 					      21 IRQ_TYPE_LEVEL_HIGH 0
 					      22 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			i2c0: i2c@fffb8000 {
@@ -398,7 +160,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_twi>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -408,11 +170,10 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfffb4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				pinctrl-names = "default";
 				status = "disabled";
 			};
 
@@ -422,9 +183,9 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc1: ssc@fffd4000 {
@@ -433,9 +194,9 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			ssc2: ssc@fffd8000 {
@@ -444,9 +205,9 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
-				clocks = <&ssc2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "pclk";
-				status = "disable";
+				status = "disabled";
 			};
 
 			macb0: ethernet@fffbc000 {
@@ -456,7 +217,7 @@
 				phy-mode = "rmii";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "ether_clk";
 				status = "disabled";
 			};
@@ -479,16 +240,16 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA30 periph A */
-							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA31 periph with pullup */
+							<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA17 periph A */
-							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA18 periph A */
+							<AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_uart0_cts: uart0_cts-0 {
@@ -505,8 +266,8 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB20 periph A with pullup */
-							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB21 periph A */
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_uart1_rts: uart1_rts-0 {
@@ -539,8 +300,8 @@
 				uart2 {
 					pinctrl_uart2: uart2-0 {
 						atmel,pins =
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA22 periph A */
-							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA23 periph A with pullup */
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 
 					pinctrl_uart2_rts: uart2_rts-0 {
@@ -557,8 +318,8 @@
 				uart3 {
 					pinctrl_uart3: uart3-0 {
 						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA5 periph B with pullup */
-							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA6 periph B */
+							<AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_uart3_rts: uart3_rts-0 {
@@ -796,7 +557,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -807,7 +568,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -818,7 +579,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -829,17 +590,18 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -847,12 +609,13 @@
 			usart0: serial@fffc0000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -860,12 +623,13 @@
 			usart1: serial@fffc4000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -873,12 +637,13 @@
 			usart2: serial@fffc8000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffc8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -886,12 +651,13 @@
 			usart3: serial@fffcc000 {
 				compatible = "atmel,at91rm9200-usart";
 				reg = <0xfffcc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -900,7 +666,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 1>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -913,7 +679,7 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -936,17 +702,17 @@
 			status = "disabled";
 		};
 
-		usb0: ohci@00300000 {
+		usb0: ohci@300000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 25 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 26 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
index 93ca66f80360..c3d4177b9823 100644
--- a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
+++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
  *
  * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 #include "at91rm9200.dtsi"
diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts
index 8dab4b75ca97..4624a6f076f8 100644
--- a/arch/arm/boot/dts/at91rm9200ek.dts
+++ b/arch/arm/boot/dts/at91rm9200ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
  *
  *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91rm9200.dtsi"
@@ -16,20 +15,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -41,6 +31,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usb1: gadget@fffb0000 {
 				atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>;
 				atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>;
@@ -71,7 +73,7 @@
 			spi0: spi@fffe0000 {
 				status = "okay";
 				cs-gpios = <&pioA 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -87,12 +89,12 @@
 			};
 		};
 
-		usb0: ohci@00300000 {
+		usb0: ohci@300000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 
-		nor_flash@10000000 {
+		flash@10000000 {
 			compatible = "cfi-flash";
 			reg = <0x10000000 0x800000>;
 			linux,mtd-name = "physmap-flash.0";
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index 4bc347549102..789fe356dbf6 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -1,20 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9260.dtsi - Device Tree Include file for AT91SAM9260 family SoC
  *
  *  Copyright (C) 2011 Atmel,
  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>,
  *                2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9260 family SoC";
 	compatible = "atmel,at91sam9260";
 	interrupt-parent = <&aic>;
@@ -36,16 +37,18 @@
 		ssc0 = &ssc0;
 	};
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 
@@ -69,9 +72,12 @@
 		};
 	};
 
-	sram0: sram@002ff000 {
+	sram0: sram@2ff000 {
 		compatible = "mmio-sram";
 		reg = <0x002ff000 0x2000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002ff000 0x2000>;
 	};
 
 	ahb {
@@ -99,301 +105,69 @@
 				reg = <0xffffea00 0x200>;
 			};
 
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9260-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9260-pmc";
+				compatible = "atmel,at91sam9260-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "fixed-clock";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9260-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_xtal>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0 1>,
-								<150000000 240000000 2 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 5000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 105000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 4 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <11>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					tc3_clk: tc3_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					tc4_clk: tc4_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					tc5_clk: tc5_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 			};
 
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffdc000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfffdc000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0
 					      27 IRQ_TYPE_LEVEL_HIGH 0
 					      28 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 28>, <&pmc PMC_TYPE_CORE PMC_SLOW>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
-			pinctrl@fffff400 {
+			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
@@ -410,16 +184,16 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB14 periph A */
-							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PB15 periph with pullup */
+							<AT91_PIOB 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB4 periph A */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
@@ -452,8 +226,8 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB6 periph A with pullup */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A */
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
@@ -470,8 +244,8 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB8 periph A with pullup */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB9 periph A */
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
@@ -488,8 +262,8 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB10 periph A with pullup */
-							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB11 periph A */
+							<AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
@@ -506,24 +280,28 @@
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PA31 periph B with pullup */
-							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PA30 periph B */
+							<AT91_PIOA 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB12 periph A with pullup */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
 				nand {
-					pinctrl_nand: nand-0 {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
 						atmel,pins =
-							<AT91_PIOC 13 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC13 gpio RDY pin pull_up */
-							 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PC14 gpio enable pin pull_up */
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
@@ -726,7 +504,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -737,7 +515,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -748,17 +526,18 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -766,12 +545,13 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -779,12 +559,13 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -792,12 +573,13 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -805,12 +587,13 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -818,12 +601,13 @@
 			uart0: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -831,12 +615,13 @@
 			uart1: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&uart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -847,7 +632,7 @@
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
@@ -856,7 +641,7 @@
 				compatible = "atmel,at91sam9260-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -867,7 +652,7 @@
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				status = "disabled";
 			};
 
@@ -877,8 +662,7 @@
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				pinctrl-names = "default";
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -889,7 +673,7 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -902,7 +686,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -915,64 +699,36 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
 			adc0: adc@fffe0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xf>;
 				atmel,adc-vref = <3300>;
 				atmel,adc-startup-time = <15>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger@0 {
-					reg = <0>;
-					trigger-name = "timer-counter-0";
-					trigger-value = <0x1>;
-				};
-				trigger@1 {
-					reg = <1>;
-					trigger-name = "timer-counter-1";
-					trigger-value = <0x3>;
-				};
-
-				trigger@2 {
-					reg = <2>;
-					trigger-name = "timer-counter-2";
-					trigger-value = <0x5>;
-				};
-
-				trigger@3 {
-					reg = <3>;
-					trigger-name = "external";
-					trigger-value = <0xd>;
-					trigger-external;
-				};
 			};
 
 			rtc@fffffd20 {
 				compatible = "atmel,at91sam9260-rtt";
 				reg = <0xfffffd20 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				status = "disabled";
 			};
 
-			watchdog@fffffd40 {
+			watchdog: watchdog@fffffd40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_SLOW>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -986,35 +742,44 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe800 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioC 13 GPIO_ACTIVE_HIGH
-				 &pioC 14 GPIO_ACTIVE_HIGH
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9260-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
 	};
 
-	i2c@0 {
+	i2c_gpio0: i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 24 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9260ek.dts b/arch/arm/boot/dts/at91sam9260ek.dts
new file mode 100644
index 000000000000..bb72f050a4fe
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9260ek.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for Atmel at91sam9260 Evaluation Kit
+ *
+ *  Copyright (C) 2016 Atmel,
+ *		  2016 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+/dts-v1/;
+#include "at91sam9260.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Atmel at91sam9260ek";
+	compatible = "atmel,at91sam9260ek", "atmel,at91sam9260", "atmel,at91sam9";
+
+	chosen {
+		stdout-path = &dbgu;
+	};
+
+	memory@20000000 {
+		reg = <0x20000000 0x4000000>;
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <18432000>;
+		};
+	};
+
+	ahb {
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
+			usb1: gadget@fffa4000 {
+				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
+				status = "okay";
+			};
+
+			mmc0: mmc@fffa8000 {
+				pinctrl-0 = <
+					&pinctrl_board_mmc0_slot1
+					&pinctrl_mmc0_clk
+					&pinctrl_mmc0_slot1_cmd_dat0
+					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
+				status = "okay";
+				slot@1 {
+					reg = <1>;
+					bus-width = <4>;
+					cd-gpios = <&pioC 9 GPIO_ACTIVE_HIGH>;
+				};
+			};
+
+			usart0: serial@fffb0000 {
+				pinctrl-0 =
+					<&pinctrl_usart0
+					 &pinctrl_usart0_rts
+					 &pinctrl_usart0_cts
+					 &pinctrl_usart0_dtr_dsr
+					 &pinctrl_usart0_dcd
+					 &pinctrl_usart0_ri>;
+				status = "okay";
+			};
+
+			usart1: serial@fffb4000 {
+				status = "okay";
+			};
+
+			ssc0: ssc@fffbc000 {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_ssc0_tx>;
+			};
+
+			macb0: ethernet@fffc4000 {
+				phy-mode = "rmii";
+				status = "okay";
+			};
+
+			spi0: spi@fffc8000 {
+				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
+				flash@1 {
+					compatible = "atmel,at45", "atmel,dataflash";
+					spi-max-frequency = <50000000>;
+					reg = <1>;
+				};
+			};
+
+			dbgu: serial@fffff200 {
+				status = "okay";
+			};
+
+			pinctrl@fffff400 {
+				board {
+					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
+						atmel,pins =
+							<AT91_PIOC 9 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+					};
+				};
+			};
+
+			shdwc@fffffd10 {
+				atmel,wakeup-counter = <10>;
+				atmel,wakeup-rtt-timer;
+			};
+
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+				status = "okay";
+			};
+
+			watchdog@fffffd40 {
+				status = "okay";
+			};
+
+			gpbr: syscon@fffffd50 {
+				status = "okay";
+			};
+		};
+
+		usb0: ohci@500000 {
+			num-ports = <2>;
+			status = "okay";
+		};
+
+		nand0: nand@40000000 {
+			nand-bus-width = <8>;
+			nand-ecc-mode = "soft";
+			nand-on-flash-bbt;
+			status = "okay";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-3 {
+			label = "Button 3";
+			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
+			linux,code = <0x103>;
+			wakeup-source;
+		};
+
+		button-4 {
+			label = "Button 4";
+			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	i2c-gpio-0 {
+		status = "okay";
+
+		24c512@50 {
+			compatible = "atmel,24c512";
+			reg = <0x50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		ds1 {
+			label = "ds1";
+			gpios = <&pioA 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		ds5 {
+			label = "ds5";
+			gpios = <&pioA 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi
index b2c44a07a3d0..ee0bd1aceb3f 100644
--- a/arch/arm/boot/dts/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/at91sam9261.dtsi
@@ -1,18 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
  *
  *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- *
- * Licensed under GPLv2 only.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9261 family SoC";
 	compatible = "atmel,at91sam9261";
 	interrupt-parent = <&aic>;
@@ -33,16 +34,18 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x08000000>;
 	};
 
@@ -60,9 +63,12 @@
 		};
 	};
 
-	sram: sram@00300000 {
+	sram: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x28000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x28000>;
 	};
 
 	ahb {
@@ -71,40 +77,51 @@
 		#size-cells = <1>;
 		ranges;
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&hclk0>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_SYSTEM 16>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
-		fb0: fb@0x00600000 {
+		fb0: fb@600000 {
 			compatible = "atmel,at91sam9261-lcdc";
 			reg = <0x00600000 0x1000>;
 			interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&hclk1>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_SYSTEM 17>;
 			clock-names = "lcdc_clk", "hclk";
 			status = "disabled";
 		};
 
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9261-ebi";
+			#address-cells = <2>;
 			#size-cells = <1>;
-			reg = <0x40000000 0x10000000>;
-			atmel,nand-addr-offset = <22>;
-			atmel,nand-cmd-offset = <21>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-
-			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>,
-				<&pioC 14 GPIO_ACTIVE_HIGH>,
-				<0>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000
+				  0x6 0x0 0x70000000 0x10000000
+				  0x7 0x0 0x80000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9261-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
 		};
 
 		apb {
@@ -114,20 +131,22 @@
 			ranges;
 
 			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <18 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			usb1: gadget@fffa4000 {
 				compatible = "atmel,at91sam9261-udc";
 				reg = <0xfffa4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>, <&pmc PMC_TYPE_SYSTEM 7>;
 				clock-names = "pclk", "hclk";
 				atmel,matrix = <&matrix>;
 				status = "disabled";
@@ -141,7 +160,7 @@
 				pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -154,19 +173,20 @@
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				status = "disabled";
 			};
 
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -174,12 +194,13 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -187,12 +208,13 @@
 			usart2: serial@fffb8000{
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -203,7 +225,7 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -214,7 +236,7 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -225,7 +247,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
-				clocks = <&ssc2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -239,7 +261,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -252,7 +274,7 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -262,8 +284,13 @@
 				reg = <0xffffea00 0x200>;
 			};
 
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
 			matrix: matrix@ffffee00 {
-				compatible = "atmel,at91sam9260-bus-matrix", "syscon";
+				compatible = "atmel,at91sam9261-matrix", "syscon";
 				reg = <0xffffee00 0x200>;
 			};
 
@@ -278,10 +305,11 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -302,8 +330,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 9  AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -311,7 +339,7 @@
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
 							<AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
@@ -329,7 +357,7 @@
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
 							<AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
@@ -347,7 +375,7 @@
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
 							<AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
@@ -362,9 +390,13 @@
 				};
 
 				nand {
-					pinctrl_nand: nand-0 {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
 						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 				};
@@ -541,7 +573,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -552,7 +584,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -563,275 +595,36 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91sam9261-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
-								<190000000 240000000 2 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 5000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 94000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 4 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-
-					prog3: prog3 {
-						#clock-cells = <0>;
-						reg = <3>;
-						interrupts = <AT91_PMC_PCKRDY(3)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-
-					pck3: pck3 {
-						#clock-cells = <0>;
-						reg = <11>;
-						clocks = <&prog3>;
-					};
-
-					hclk0: hclk0 {
-						#clock-cells = <0>;
-						reg = <16>;
-						clocks = <&mck>;
-					};
-
-					hclk1: hclk1 {
-						#clock-cells = <0>;
-						reg = <17>;
-						clocks = <&mck>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <11>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc2_clk: ssc2_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			rtc@fffffd20 {
@@ -846,6 +639,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				status = "disabled";
 			};
 
@@ -857,7 +651,7 @@
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c_bitbang>;
diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts
index 2e92ac020f23..88869ca874d1 100644
--- a/arch/arm/boot/dts/at91sam9261ek.dts
+++ b/arch/arm/boot/dts/at91sam9261ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
  *
  *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- *
- * Licensed under GPLv2 only.
  */
 /dts-v1/;
 #include "at91sam9261.dtsi"
@@ -17,20 +16,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -41,16 +31,16 @@
 	};
 
 	ahb {
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			status = "okay";
 		};
 
-		fb0: fb@0x00600000 {
+		fb0: fb@600000 {
 			display = <&display0>;
 			atmel,power-control-gpio = <&pioA 12 GPIO_ACTIVE_LOW>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <16>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -77,44 +67,75 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			bootloader@40000 {
-				label = "bootloader";
-				reg = <0x40000 0x80000>;
-			};
-
-			bootloaderenv@c0000 {
-				label = "bootloader env";
-				reg = <0xc0000 0xc0000>;
-			};
-
-			dtb@180000 {
-				label = "device tree";
-				reg = <0x180000 0x80000>;
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
 			};
+		};
 
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
+		apb {
+			tcb0: timer@fffa0000 {
+				timer0: timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
 
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x0f800000>;
+				timer1: timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
 			};
-		};
 
-		apb {
 			usb1: gadget@fffa4000 {
 				atmel,vbus-gpio = <&pioB 29 GPIO_ACTIVE_HIGH>;
 				status = "okay";
@@ -124,13 +145,13 @@
 				cs-gpios = <&pioA 3 0>, <0>, <&pioA 28 0>, <0>;
 				status = "okay";
 
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					reg = <0>;
 					spi-max-frequency = <15000000>;
 				};
 
-				tsc2046@0 {
+				tsc2046@2 {
 					reg = <2>;
 					compatible = "ti,ads7843";
 					interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>;
@@ -149,7 +170,7 @@
 					ti,debounce-tol = /bits/ 16 <65535>;
 					ti,debounce-max = /bits/ 16 <1>;
 
-					linux,wakeup;
+					wakeup-source;
 				};
 			};
 
@@ -157,6 +178,10 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
@@ -186,35 +211,35 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		button_0 {
+		button-0 {
 			label = "button_0";
 			gpios = <&pioA 27 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		button_1 {
+		button-1 {
 			label = "button_1";
 			gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
 			linux,code = <257>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		button_2 {
+		button-2 {
 			label = "button_2";
 			gpios = <&pioA 25 GPIO_ACTIVE_LOW>;
 			linux,code = <258>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		button_3 {
+		button-3 {
 			label = "button_3";
 			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
 			linux,code = <259>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index e36d966ef5e8..3ce9ea987312 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -1,18 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9263 family SoC";
 	compatible = "atmel,at91sam9263";
 	interrupt-parent = <&aic>;
@@ -35,16 +36,18 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x08000000>;
 	};
 
@@ -62,14 +65,20 @@
 		};
 	};
 
-	sram0: sram@00300000 {
+	sram0: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x14000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x14000>;
 	};
 
-	sram1: sram@00500000 {
+	sram1: sram@500000 {
 		compatible = "mmio-sram";
 		reg = <0x00500000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00500000 0x4000>;
 	};
 
 	ahb {
@@ -93,267 +102,12 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91rm9200-pmc";
+				compatible = "atmel,at91sam9263-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
-								<190000000 240000000 2 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
-								<190000000 240000000 2 1>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 120000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 4 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-
-					prog3: prog3 {
-						#clock-cells = <0>;
-						reg = <3>;
-						interrupts = <AT91_PMC_PCKRDY(3)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-
-					pck3: pck3 {
-						#clock-cells = <0>;
-						reg = <11>;
-						clocks = <&prog3>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioCDE_clk: pioCDE_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					can_clk: can_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					twi0_clk: twi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					ac97_clk: ac97_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tcb_clk: tcb_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					g2de_clk: g2de_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					dma_clk: dma_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
 			};
 
 			ramc0: ramc@ffffe200 {
@@ -361,34 +115,53 @@
 				reg = <0xffffe200 0x200>;
 			};
 
+			smc0: smc@ffffe400 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe400 0x200>;
+			};
+
 			ramc1: ramc@ffffe800 {
 				compatible = "atmel,at91sam9260-sdramc";
 				reg = <0xffffe800 0x200>;
 			};
 
+			smc1: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
+			matrix: matrix@ffffec00 {
+				compatible = "atmel,at91sam9263-matrix", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			tcb0: timer@fff7c000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfff7c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&slow_xtal>;
 			};
 
 			pinctrl@fffff200 {
@@ -410,16 +183,16 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PC30 periph A */
-							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PC31 periph with pullup */
+							<AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOC 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA26 periph A with pullup */
-							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA27 periph A */
+							<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
@@ -436,8 +209,8 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD0 periph A with pullup */
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD1 periph A */
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
@@ -454,8 +227,8 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PD2 periph A with pullup */
-							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD3 periph A */
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
@@ -470,10 +243,14 @@
 				};
 
 				nand {
-					pinctrl_nand: nand-0 {
+					pinctrl_nand_rb: nand-rb-0 {
 						atmel,pins =
-							<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PA22 gpio RDY pin pull_up*/
-							 AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD15 gpio enable pin pull_up */
+							<AT91_PIOA 22 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
+						atmel,pins =
+							 <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
@@ -713,7 +490,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff400 {
@@ -724,7 +501,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff600 {
@@ -735,7 +512,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioD: gpio@fffff800 {
@@ -746,7 +523,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioE: gpio@fffffa00 {
@@ -757,17 +534,18 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -775,12 +553,13 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -788,12 +567,13 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -801,12 +581,13 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -817,7 +598,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -828,7 +609,7 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -839,7 +620,7 @@
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ac97>;
-				clocks = <&ac97_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				clock-names = "ac97_clk";
 				status = "disabled";
 			};
@@ -850,7 +631,7 @@
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
@@ -859,7 +640,7 @@
 				compatible = "atmel,at91sam9263-udc";
 				reg = <0xfff78000 0x4000>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_SYSTEM 7>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -870,7 +651,7 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				status = "disabled";
 			};
 
@@ -878,10 +659,9 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -890,10 +670,9 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff84000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -902,6 +681,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&slow_xtal>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -916,7 +696,7 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -929,7 +709,7 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -939,7 +719,7 @@
 				reg = <0xfffb8000 0x300>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 				clock-names = "pwm_clk";
 				status = "disabled";
 			};
@@ -950,7 +730,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can_rx_tx>;
-				clocks = <&can_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "can_clk";
 			};
 
@@ -977,46 +757,74 @@
 			};
 		};
 
-		fb0: fb@0x00700000 {
+		fb0: fb@700000 {
 			compatible = "atmel,at91sam9263-lcdc";
 			reg = <0x00700000 0x1000>;
 			interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&lcd_clk>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_PERIPHERAL 26>;
 			clock-names = "lcdc_clk", "hclk";
 			status = "disabled";
 		};
 
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe000 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioA 22 GPIO_ACTIVE_HIGH
-				 &pioD 15 GPIO_ACTIVE_HIGH
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00a00000 {
+		usb0: ohci@a00000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
 			interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
+
+		ebi0: ebi@10000000 {
+			compatible = "atmel,at91sam9263-ebi0";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc0>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller0: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
+
+		ebi1: ebi@70000000 {
+			compatible = "atmel,at91sam9263-ebi1";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc1>;
+			atmel,matrix = <&matrix>;
+			reg = <0x80000000 0x20000000>;
+			ranges = <0x0 0x0 0x80000000 0x10000000
+				  0x1 0x0 0x90000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller1: nand-controller {
+				compatible = "atmel,at91sam9260-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts
index 23381276ffb8..ce8baff6a9f4 100644
--- a/arch/arm/boot/dts/at91sam9263ek.dts
+++ b/arch/arm/boot/dts/at91sam9263ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91sam9263.dtsi"
@@ -17,20 +16,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <16367660>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -46,6 +36,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart0: serial@fff8c000 {
 				pinctrl-0 = <
 					&pinctrl_usart0
@@ -70,6 +72,7 @@
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot0_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -92,23 +95,27 @@
 			spi0: spi@fffa4000 {
 				status = "okay";
 				cs-gpios = <&pioA 5 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
 				};
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			watchdog@fffffd40 {
 				status = "okay";
 			};
 		};
 
-		fb0: fb@0x00700000 {
+		fb0: fb@700000 {
 			display = <&display0>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <16>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -134,54 +141,73 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt = <1>;
+		ebi0: ebi@10000000 {
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x20000>;
-			};
-
-			bareboxenv2@80000 {
-				label = "bareboxenv2";
-				reg = <0x80000 0x20000>;
-			};
-
-			oftree@80000 {
-				label = "oftree";
-				reg = <0xa0000 0x20000>;
-			};
-
-			kernel@a0000 {
-				label = "kernel";
-				reg = <0xc0000 0x400000>;
-			};
-
-			rootfs@4a0000 {
-				label = "rootfs";
-				reg = <0x4c0000 0x7800000>;
-			};
-
-			data@7ca0000 {
-				label = "data";
-				reg = <0x7cc0000 0x8340000>;
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioA 22 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioA 15 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
 			};
 		};
 
-		usb0: ohci@00a00000 {
+		usb0: ohci@a00000 {
 			num-ports = <2>;
 			status = "okay";
 			atmel,vbus-gpio = <&pioA 24 GPIO_ACTIVE_HIGH
@@ -206,29 +232,29 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioC 5 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioC 4 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
-			compatible = "24c512";
+			compatible = "atmel,24c512";
 			reg = <0x50>;
 			pagesize = <128>;
 		};
diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index cfd7044616d7..dde88276fe52 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -1,28 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15 SoC";
 	compatible = "atmel,at91sam9g15", "atmel,at91sam9x5";
+};
+
+&pinctrl {
+	atmel,mux-mask = <
+	      /*    A         B          C     */
+	       0xffffffff 0xffe0399f 0x00000000  /* pioA */
+	       0x00040000 0x00047e3f 0x00000000  /* pioB */
+	       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
+	       0x003fffff 0x003f8000 0x00000000  /* pioD */
+	      >;
+};
 
-	ahb {
-		apb {
-			pinctrl@fffff400 {
-				atmel,mux-mask = <
-				      /*    A         B          C     */
-				       0xffffffff 0xffe0399f 0x00000000  /* pioA */
-				       0x00040000 0x00047e3f 0x00000000  /* pioB */
-				       0xfdffffff 0x00000000 0xb83fffff  /* pioC */
-				       0x003fffff 0x003f8000 0x00000000  /* pioD */
-				      >;
-			};
-		};
-	};
+&pmc {
+	compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
 };
diff --git a/arch/arm/boot/dts/at91sam9g15ek.dts b/arch/arm/boot/dts/at91sam9g15ek.dts
index 26b0444b0f96..889a5097eb2d 100644
--- a/arch/arm/boot/dts/at91sam9g15ek.dts
+++ b/arch/arm/boot/dts/at91sam9g15ek.dts
@@ -1,16 +1,36 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9g15ek.dts - Device Tree file for AT91SAM9G15-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g15.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G15-EK";
 	compatible = "atmel,at91sam9g15ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
+	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index f59301618163..708e1646b7f4 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9260.dtsi"
@@ -12,17 +11,20 @@
 	model = "Atmel AT91SAM9G20 family SoC";
 	compatible = "atmel,at91sam9g20";
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x08000000>;
 	};
 
-	sram0: sram@002ff000 {
+	sram0: sram@2ff000 {
 		status = "disabled";
 	};
 
-	sram1: sram@002fc000 {
+	sram1: sram@2fc000 {
 		compatible = "mmio-sram";
 		reg = <0x002fc000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x002fc000 0x8000>;
 	};
 
 	ahb {
@@ -40,28 +42,7 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				plla: pllack {
-					atmel,clk-input-range = <2000000 32000000>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
-								<695000000 750000000 1 0>,
-								<645000000 700000000 2 0>,
-								<595000000 650000000 3 0>,
-								<545000000 600000000 0 1>,
-								<495000000 550000000 1 1>,
-								<445000000 500000000 2 1>,
-								<400000000 450000000 3 1>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91sam9g20-clk-pllb";
-					atmel,clk-input-range = <2000000 32000000>;
-					atmel,pll-clk-output-ranges = <30000000 100000000 0 0>;
-				};
-
-				mck: masterck {
-					atmel,clk-output-range = <0 133000000>;
-					atmel,clk-divisors = <1 2 4 6>;
-				};
+				compatible = "atmel,at91sam9g20-pmc", "atmel,at91sam9260-pmc", "syscon";
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9g20ek.dts b/arch/arm/boot/dts/at91sam9g20ek.dts
index bbfd753112c9..6de7a7cd3c07 100644
--- a/arch/arm/boot/dts/at91sam9g20ek.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9g20ek_common.dtsi"
diff --git a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
index bdb799bad179..2db95e8ffc64 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
+++ b/arch/arm/boot/dts/at91sam9g20ek_2mmc.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9g20ek_common.dtsi"
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index 57548a2c5a1e..024af2db638e 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -1,11 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 #include "at91sam9g20.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 
@@ -14,20 +14,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <18432000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -48,6 +39,13 @@
 
 				};
 
+				usb1 {
+					pinctrl_usb1_vbus_gpio: usb1_vbus_gpio {
+						atmel,pins =
+							<AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;	/* PC5 GPIO */
+					};
+				};
+
 				mmc0_slot1 {
 					pinctrl_board_mmc0_slot1: mmc0_slot1-board {
 						atmel,pins =
@@ -60,6 +58,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart0: serial@fffb0000 {
 				pinctrl-0 =
 					<&pinctrl_usart0
@@ -81,6 +91,8 @@
 			};
 
 			usb1: gadget@fffa4000 {
+				pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
+				pinctrl-names = "default";
 				atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
 				status = "okay";
 			};
@@ -91,6 +103,7 @@
 					&pinctrl_mmc0_clk
 					&pinctrl_mmc0_slot1_cmd_dat0
 					&pinctrl_mmc0_slot1_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@1 {
 					reg = <1>;
@@ -106,7 +119,7 @@
 
 			spi0: spi@fffc8000 {
 				cs-gpios = <0>, <&pioC 11 0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@1 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <50000000>;
 					reg = <1>;
@@ -132,88 +145,119 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x20000>;
-			};
-
-			barebox@20000 {
-				label = "barebox";
-				reg = <0x20000 0x40000>;
-			};
-
-			bareboxenv@60000 {
-				label = "bareboxenv";
-				reg = <0x60000 0x20000>;
-			};
-
-			bareboxenv2@80000 {
-				label = "bareboxenv2";
-				reg = <0x80000 0x20000>;
-			};
-
-			oftree@80000 {
-				label = "oftree";
-				reg = <0xa0000 0x20000>;
-			};
-
-			kernel@a0000 {
-				label = "kernel";
-				reg = <0xc0000 0x400000>;
-			};
-
-			rootfs@4a0000 {
-				label = "rootfs";
-				reg = <0x4c0000 0x7800000>;
-			};
-
-			data@7ca0000 {
-				label = "data";
-				reg = <0x7cc0000 0x8340000>;
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x20000>;
+						};
+
+						barebox@20000 {
+							label = "barebox";
+							reg = <0x20000 0x40000>;
+						};
+
+						bareboxenv@60000 {
+							label = "bareboxenv";
+							reg = <0x60000 0x20000>;
+						};
+
+						bareboxenv2@80000 {
+							label = "bareboxenv2";
+							reg = <0x80000 0x20000>;
+						};
+
+						oftree@80000 {
+							label = "oftree";
+							reg = <0xa0000 0x20000>;
+						};
+
+						kernel@a0000 {
+							label = "kernel";
+							reg = <0xc0000 0x400000>;
+						};
+
+						rootfs@4a0000 {
+							label = "rootfs";
+							reg = <0x4c0000 0x7800000>;
+						};
+
+						data@7ca0000 {
+							label = "data";
+							reg = <0x7cc0000 0x8340000>;
+						};
+					};
+				};
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		24c512@50 {
-			compatible = "24c512";
+			compatible = "atmel,24c512";
 			reg = <0x50>;
+			vcc-supply = <&reg_3v3>;
 		};
 
 		wm8731: wm8731@1b {
 			compatible = "wm8731";
 			reg = <0x1b>;
+
+			/* PCK0 at 12MHz */
+			clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			clock-names = "mclk";
+			assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+			assigned-clock-rates = <12000000>;
+
+			HPVDD-supply = <&vcc_dac>;
+			AVDD-supply = <&vcc_dac>;
+			DCVDD-supply = <&reg_3v3>;
+			DBVDD-supply = <&reg_3v3>;
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		btn3 {
+		button-3 {
 			label = "Button 3";
 			gpios = <&pioA 30 GPIO_ACTIVE_LOW>;
 			linux,code = <0x103>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		btn4 {
+		button-4 {
 			label = "Button 4";
 			gpios = <&pioA 31 GPIO_ACTIVE_LOW>;
-			linux,code = <0x104>;
-			gpio-key,wakeup;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
 		};
 	};
 
@@ -231,4 +275,35 @@
 		atmel,ssc-controller = <&ssc0>;
 		atmel,audio-codec = <&wm8731>;
 	};
+
+	reg_5v: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_3v3: fixedregulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v: fixedregulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1V";
+		vin-supply = <&reg_5v>;
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vcc_dac: fixedregulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_DAC";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
new file mode 100644
index 000000000000..92f2c05c873f
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g25-gardena-smart-gateway.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the GARDENA smart Gateway (Article No. 19000)
+ *
+ *  Copyright (C) 2020 GARDENA GmbH
+ */
+
+/dts-v1/;
+
+#include "at91sam9g25.dtsi"
+#include "at91sam9x5ek.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "GARDENA smart Gateway (Article No. 19000)";
+	compatible = "gardena,smart-gateway-at91sam", "atmel,at91sam9g25", "atmel,at91sam9x5",
+		"atmel,at91sam9";
+
+	aliases {
+		serial1 = &usart3;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button {
+			label = "USER_BTN1";
+			gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+		};
+	};
+
+	1wire_cm {
+		status = "disabled";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power_blue {
+			label = "smartgw:power:blue";
+			gpios = <&pioC 21 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		power_green {
+			label = "smartgw:power:green";
+			gpios = <&pioC 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		power_red {
+			label = "smartgw:power:red";
+			gpios = <&pioC 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_blue {
+			label = "smartgw:radio:blue";
+			gpios = <&pioC 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_green {
+			label = "smartgw:radio:green";
+			gpios = <&pioC 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		radio_red {
+			label = "smartgw:radio:red";
+			gpios = <&pioC 16 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_blue {
+			label = "smartgw:internet:blue";
+			gpios = <&pioC 15 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_green {
+			label = "smartgw:internet:green";
+			gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		internet_red {
+			label = "smartgw:internet:red";
+			gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		heartbeat {
+			label = "smartgw:heartbeat";
+			gpios = <&pioB 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		pb18 {
+			status = "disabled";
+		};
+
+		pd21 {
+			status = "disabled";
+		};
+	};
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&usart0 {
+	status = "disabled";
+};
+
+&usart2 {
+	status = "disabled";
+};
+
+&usart3 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_usart3
+		     &pinctrl_usart3_rts
+		     &pinctrl_usart3_cts
+		    >;
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "disabled";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&adc0 {
+	status = "disabled";
+};
+
+&ssc0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index a7da0dd0c98f..d2f13afb35ea 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
@@ -21,11 +20,15 @@
 				atmel,mux-mask = <
 				      /*    A         B          C     */
 				       0xffffffff 0xffe0399f 0xc000001c  /* pioA */
-				       0x0007ffff 0x8000fe3f 0x00000000  /* pioB */
+				       0x0007ffff 0x00047e3f 0x00000000  /* pioB */
 				       0x80000000 0x07c0ffff 0xb83fffff  /* pioC */
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 707fd4ea58f5..61b0bdb615dc 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9g25ek.dts - Device Tree file for AT91SAM9G25-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g25.dtsi"
@@ -13,31 +12,54 @@
 / {
 	model = "Atmel AT91SAM9G25-EK";
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
 
-	ahb {
-		apb {
-			spi0: spi@f0000000 {
-				status = "disabled";
-			};
-
-			mmc1: mmc@f000c000 {
-				status = "disabled";
-			};
+&i2c0 {
+	camera@30 {
+		compatible = "ovti,ov2640";
+		reg = <0x30>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+		resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
+		pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		clock-names = "xvclk";
+		assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+		assigned-clock-rates = <25000000>;
+		status = "okay";
 
-			i2c0: i2c@f8010000 {
-				ov2640: camera@0x30 {
-					status = "okay";
-				};
+		port {
+			ov2640_0: endpoint {
+				remote-endpoint = <&isi_0>;
+				bus-width = <8>;
 			};
+		};
+	};
+};
 
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
+&isi {
+	status = "okay";
 
-			isi: isi@f8048000 {
-				status = "okay";
-			};
+	port {
+		isi_0: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ov2640_0>;
+			bus-width = <8>;
+			vsync-active = <1>;
+			hsync-active = <1>;
 		};
 	};
 };
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&spi0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index e35c2fcf8298..48c2bc4a7753 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 #include "at91sam9x5_macb0.dtsi"
 
 / {
@@ -24,6 +24,10 @@
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9g35ek.dts b/arch/arm/boot/dts/at91sam9g35ek.dts
index 641a9bf89ed1..f966b56de63c 100644
--- a/arch/arm/boot/dts/at91sam9g35ek.dts
+++ b/arch/arm/boot/dts/at91sam9g35ek.dts
@@ -1,25 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g35.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9G35-EK";
 	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
+	backlight: backlight {
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		status = "okay";
 	};
+
+	panel: panel {
+		status = "okay";
+	};
+
+	panel_reg: panel_regulator {
+		status = "okay";
+	};
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 18177f5a7464..95f5d76234db 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
  *                    applies to AT91SAM9G45, AT91SAM9M10,
@@ -5,18 +6,18 @@
  *
  *  Copyright (C) 2011 Atmel,
  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9G45 family SoC";
 	compatible = "atmel,at91sam9g45";
 	interrupt-parent = <&aic>;
@@ -41,16 +42,18 @@
 		pwm0 = &pwm0;
 	};
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@70000000 {
+		device_type = "memory";
 		reg = <0x70000000 0x10000000>;
 	};
 
@@ -74,9 +77,12 @@
 		};
 	};
 
-	sram: sram@00300000 {
+	sram: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
 	};
 
 	ahb {
@@ -102,320 +108,74 @@
 			ramc0: ramc@ffffe400 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe400 0x200>;
-				clocks = <&ddrck>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "ddrck";
 			};
 
 			ramc1: ramc@ffffe600 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe600 0x200>;
-				clocks = <&ddrck>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "ddrck";
 			};
 
+			smc: smc@ffffe800 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffe800 0x200>;
+			};
+
+			matrix: matrix@ffffea00 {
+				compatible = "atmel,at91sam9g45-matrix", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc";
+				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
-								       695000000 750000000 1 0
-								       645000000 700000000 2 0
-								       595000000 650000000 3 0
-								       545000000 600000000 0 1
-								       495000000 555000000 1 1
-								       445000000 500000000 2 1
-								       400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9x5-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9g45-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioDE_clk: pioDE_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi0_clk: twi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tcb0_clk: tcb0_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					ac97_clk: ac97_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					aestdessha_clk: aestdessha_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					vdec_clk: vdec_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9rl-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			tcb0: timer@fff7c000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfff7c000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			tcb1: timer@fffd4000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfffd4000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -423,7 +183,7 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "dma_clk";
 			};
 
@@ -443,6 +203,16 @@
 				      >;
 
 				/* shared pinctrl settings */
+				ac97 {
+					pinctrl_ac97: ac97-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97RX */
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97TX */
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* AC97FS */
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* AC97CK */
+					};
+				};
+
 				adc0 {
 					pinctrl_adc0_adtrg: adc0_adtrg {
 						atmel,pins = <AT91_PIOD 28 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -476,8 +246,8 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PB12 periph A */
-							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB13 periph A */
+							<AT91_PIOB 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -498,31 +268,39 @@
 				};
 
 				isi {
-					pinctrl_isi: isi-0 {
-						atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
-							      AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* D9 */
-							      AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
-							      AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE /* D11 */
-							      AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
-							      AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
-							      AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
-							      AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
-							      AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
-							      AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
-							      AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
-							      AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
-							      AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
-							      AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
-							      AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE /* HSYNC */
-							      AT91_PIOB 31 AT91_PERIPH_A AT91_PINCTRL_NONE /* MCK */>;
+					pinctrl_isi_data_0_7: isi-0-data-0-7 {
+						atmel,pins =
+							<AT91_PIOB 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* D0 */
+							AT91_PIOB 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* D1 */
+							AT91_PIOB 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* D2 */
+							AT91_PIOB 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* D3 */
+							AT91_PIOB 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* D4 */
+							AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* D5 */
+							AT91_PIOB 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* D6 */
+							AT91_PIOB 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* D7 */
+							AT91_PIOB 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PCK */
+							AT91_PIOB 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* VSYNC */
+							AT91_PIOB 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* HSYNC */
+					};
+
+					pinctrl_isi_data_8_9: isi-0-data-8-9 {
+						atmel,pins =
+							<AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE /* D8 */
+							AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D9 */
+					};
+
+					pinctrl_isi_data_10_11: isi-0-data-10-11 {
+						atmel,pins =
+							<AT91_PIOB 10 AT91_PERIPH_B AT91_PINCTRL_NONE /* D10 */
+							AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* D11 */
 					};
 				};
 
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB19 periph A with pullup */
-							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB18 periph A */
+							<AT91_PIOB 19 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 18 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
@@ -536,11 +314,11 @@
 					};
 				};
 
-				uart1 {
+				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB4 periph A with pullup */
-							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB5 periph A */
+							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
@@ -557,8 +335,8 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB6 periph A with pullup */
-							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB7 periph A */
+							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
@@ -575,8 +353,8 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PB9 periph A with pullup */
-							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PB8 periph A */
+							<AT91_PIOB 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOB 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
@@ -591,10 +369,14 @@
 				};
 
 				nand {
-					pinctrl_nand: nand-0 {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
 						atmel,pins =
-							<AT91_PIOC 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PC8 gpio RDY pin pull_up*/
-							 AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PC14 gpio enable pin pull_up */
+							 <AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
@@ -844,7 +626,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff400 {
@@ -855,7 +637,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff600 {
@@ -866,7 +648,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioD: gpio@fffff800 {
@@ -877,7 +659,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				};
 
 				pioE: gpio@fffffa00 {
@@ -888,17 +670,18 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				};
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				reg = <0xffffee00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -906,12 +689,13 @@
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -919,12 +703,13 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -932,12 +717,13 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -945,12 +731,13 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -961,16 +748,16 @@
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
 
 			trng@fffcc000 {
 				compatible = "atmel,at91sam9g45-trng";
-				reg = <0xfffcc000 0x4000>;
+				reg = <0xfffcc000 0x100>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&trng_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 			};
 
 			i2c0: i2c@fff84000 {
@@ -981,7 +768,7 @@
 				pinctrl-0 = <&pinctrl_i2c0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				status = "disabled";
 			};
 
@@ -993,7 +780,7 @@
 				pinctrl-0 = <&pinctrl_i2c1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				status = "disabled";
 			};
 
@@ -1003,7 +790,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -1014,62 +801,44 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
 
+			ac97: sound@fffac000 {
+				compatible = "atmel,at91sam9263-ac97c";
+				reg = <0xfffac000 0x4000>;
+				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ac97>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
+				clock-names = "ac97_clk";
+				status = "disabled";
+			};
+
 			adc0: adc@fffb0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9g45-adc";
 				reg = <0xfffb0000 0x100>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-channels-used = <0xff>;
 				atmel,adc-vref = <3300>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger@0 {
-					reg = <0>;
-					trigger-name = "external-rising";
-					trigger-value = <0x1>;
-					trigger-external;
-				};
-				trigger@1 {
-					reg = <1>;
-					trigger-name = "external-falling";
-					trigger-value = <0x2>;
-					trigger-external;
-				};
-
-				trigger@2 {
-					reg = <2>;
-					trigger-name = "external-any";
-					trigger-value = <0x3>;
-					trigger-external;
-				};
-
-				trigger@3 {
-					reg = <3>;
-					trigger-name = "continuous";
-					trigger-value = <0x6>;
-				};
 			};
 
 			isi@fffb4000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xfffb4000 0x4000>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
-				clocks = <&isi_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
 				clock-names = "isi_clk";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_isi>;
 				status = "disabled";
+				port {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
 			};
 
 			pwm0: pwm@fffb8000 {
@@ -1077,7 +846,7 @@
 				reg = <0xfffb8000 0x300>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 				status = "disabled";
 			};
 
@@ -1085,12 +854,11 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfff80000 0x600>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -1099,12 +867,11 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfffd0000 0x600>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>;
-				pinctrl-names = "default";
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>;
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -1113,6 +880,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -1127,7 +895,7 @@
 				interrupts = <14 4 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -1140,99 +908,26 @@
 				interrupts = <15 4 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
 			usb2: gadget@fff78000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&udphs_clk>, <&utmi>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
-
-				ep0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
 			};
 
-			sckc@fffffd50 {
+			clk32k: sckc@fffffd50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffd50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <1200000>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <75>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			rtc@fffffd20 {
@@ -1247,6 +942,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffdb0 0x30>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1257,56 +953,62 @@
 			};
 		};
 
-		fb0: fb@0x00500000 {
+		fb0: fb@500000 {
 			compatible = "atmel,at91sam9g45-lcdc";
 			reg = <0x00500000 0x1000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&lcd_clk>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 			clock-names = "hclk", "lcdc_clk";
 			status = "disabled";
 		};
 
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe200 0x200
-			      >;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			atmel,nand-has-dma;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioC 8 GPIO_ACTIVE_HIGH
-				 &pioC 14 GPIO_ACTIVE_HIGH
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00700000 {
+		usb0: ohci@700000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
-		usb1: ehci@00800000 {
+		usb1: ehci@800000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
 			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9g45-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 21 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 1375d3362603..7f45e81ca165 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
  *
  *  Copyright (C) 2011 Atmel,
  *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9g45.dtsi"
@@ -19,20 +18,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@70000000 {
 		reg = <0x70000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 		      clock-frequency = <32768>;
 		};
@@ -48,6 +38,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fff7c000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart1: serial@fff90000 {
 				pinctrl-0 =
 					<&pinctrl_usart1
@@ -63,6 +65,25 @@
 
 			i2c0: i2c@fff84000 {
 				status = "okay";
+				ov2640: camera@30 {
+					compatible = "ovti,ov2640";
+					reg = <0x30>;
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					clock-names = "xvclk";
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
+					assigned-clock-rates = <25000000>;
+
+					port {
+						ov2640_0: endpoint {
+							remote-endpoint = <&isi_0>;
+							bus-width = <8>;
+						};
+					};
+				};
 			};
 
 			i2c1: i2c@fff88000 {
@@ -78,6 +99,7 @@
 					&pinctrl_board_mmc0
 					&pinctrl_mmc0_slot0_clk_cmd_dat0
 					&pinctrl_mmc0_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -91,6 +113,7 @@
 					&pinctrl_board_mmc1
 					&pinctrl_mmc1_slot0_clk_cmd_dat0
 					&pinctrl_mmc1_slot0_dat1_3>;
+				pinctrl-names = "default";
 				status = "okay";
 				slot@0 {
 					reg = <0>;
@@ -101,6 +124,22 @@
 			};
 
 			pinctrl@fffff200 {
+				camera_sensor {
+					pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+						atmel,pins =
+							<AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_reset: sensor_reset-0 {
+						atmel,pins =
+							<AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_sensor_power: sensor_power-0 {
+						atmel,pins =
+							<AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+					};
+				};
 				mmc0 {
 					pinctrl_board_mmc0: mmc0-board {
 						atmel,pins =
@@ -128,7 +167,7 @@
 			spi0: spi@fffa4000{
 				status = "okay";
 				cs-gpios = <&pioB 3 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <13000000>;
 					reg = <0>;
@@ -140,6 +179,10 @@
 				status = "okay";
 			};
 
+			ac97: sound@fffac000 {
+				status = "okay";
+			};
+
 			adc0: adc@fffb0000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <
@@ -155,6 +198,20 @@
 				status = "okay";
 			};
 
+			isi@fffb4000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_isi_data_0_7>;
+				status = "okay";
+				port {
+					isi_0: endpoint {
+						remote-endpoint = <&ov2640_0>;
+						bus-width = <8>;
+						vsync-active = <1>;
+						hsync-active = <1>;
+					};
+				};
+			};
+
 			pwm0: pwm@fffb8000 {
 				status = "okay";
 
@@ -176,11 +233,11 @@
 			};
 		};
 
-		fb0: fb@0x00500000 {
+		fb0: fb@500000 {
 			display = <&display0>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <32>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -205,61 +262,80 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
 
-			boot@0 {
-				label = "bootstrap/uboot/kernel";
-				reg = <0x0 0x400000>;
-			};
-
-			rootfs@400000 {
-				label = "rootfs";
-				reg = <0x400000 0x3C00000>;
-			};
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
 
-			data@4000000 {
-				label = "data";
-				reg = <0x4000000 0xC000000>;
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 8 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "bootstrap/uboot/kernel";
+							reg = <0x0 0x400000>;
+						};
+
+						rootfs@400000 {
+							label = "rootfs";
+							reg = <0x400000 0x3C00000>;
+						};
+
+						data@4000000 {
+							label = "data";
+							reg = <0x4000000 0xC000000>;
+						};
+					};
+				};
 			};
 		};
 
-		usb0: ohci@00700000 {
+		usb0: ohci@700000 {
 			status = "okay";
 			num-ports = <2>;
 			atmel,vbus-gpio = <&pioD 1 GPIO_ACTIVE_LOW
 					   &pioD 3 GPIO_ACTIVE_LOW>;
 		};
 
-		usb1: ehci@00800000 {
+		usb1: ehci@800000 {
 			status = "okay";
 		};
 	};
 
-	leds {
+	led-controller-1 {
 		compatible = "gpio-leds";
 
-		d8 {
+		led-1 {
 			label = "d8";
 			gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	pwmleds {
+	led-controller-2 {
 		compatible = "pwm-leds";
 
-		d6 {
+		led-2 {
 			label = "d6";
 			pwms = <&pwm0 3 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 			linux,default-trigger = "nand-disk";
 		};
 
-		d7 {
+		led-3 {
 			label = "d7";
 			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
@@ -267,48 +343,48 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 6 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 7 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		left {
+		button-left {
 			label = "Joystick Left";
 			gpios = <&pioB 14 GPIO_ACTIVE_LOW>;
 			linux,code = <105>;
 		};
 
-		right {
+		button-right {
 			label = "Joystick Right";
 			gpios = <&pioB 15 GPIO_ACTIVE_LOW>;
 			linux,code = <106>;
 		};
 
-		up {
+		button-up {
 			label = "Joystick Up";
 			gpios = <&pioB 16 GPIO_ACTIVE_LOW>;
 			linux,code = <103>;
 		};
 
-		down {
+		button-down {
 			label = "Joystick Down";
 			gpios = <&pioB 17 GPIO_ACTIVE_LOW>;
 			linux,code = <108>;
 		};
 
-		enter {
+		button-enter {
 			label = "Joystick Press";
 			gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 5c2a8c8c8bd4..83114d26f10d 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -1,20 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9n12.dtsi - Device Tree include file for AT91SAM9N12 SoC
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Hong Xu <hong.xu@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9N12 SoC";
 	compatible = "atmel,at91sam9n12";
 	interrupt-parent = <&aic>;
@@ -37,16 +38,18 @@
 		pwm0 = &pwm0;
 	};
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -64,9 +67,12 @@
 		};
 	};
 
-	sram: sram@00300000 {
+	sram: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
 	};
 
 	ahb {
@@ -89,305 +95,55 @@
 				atmel,external-irqs = <31>;
 			};
 
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9n12-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
 			ramc0: ramc@ffffe800 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&ddrck>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "ddrck";
 			};
 
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9n12-pmc";
+				compatible = "atmel,at91sam9n12-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_rc_osc: main_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
-					clock-frequency = <12000000>;
-					clock-accuracy = <50000000>;
-				};
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91sam9x5-clk-main";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
-					clocks = <&main_rc_osc>, <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
-								      <695000000 750000000 1 0>,
-								      <645000000 700000000 2 0>,
-								      <595000000 650000000 3 0>,
-								      <545000000 600000000 0 1>,
-								      <495000000 555000000 1 1>,
-								      <445000000 500000000 2 1>,
-								      <400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <30000000 100000000 0>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91sam9x5-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-					atmel,master-clk-have-div3-pres;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9n12-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9x5-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					lcdck: lcdck {
-						#clock-cells = <0>;
-						reg = <3>;
-						clocks = <&mck>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91sam9x5-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioAB_clk: pioAB_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioCD_clk: pioCD_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					fuse_clk: fuse_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <9>;
-						#clock-cells = <0>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tcb_clk: tcb_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					lcdc_clk: lcdc_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					sha_clk: sha_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					aes_clk: aes_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
 			};
 
-			rstc@fffffe00 {
+			reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			sckc@fffffe50 {
@@ -420,7 +176,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -428,19 +184,51 @@
 			};
 
 			tcb0: timer@f8008000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			tcb1: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>;
-				clock-names = "t0_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
+			};
+
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9n12-hlcdc";
+				reg = <0xf8038000 0x2000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk", "sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
+					};
+				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
 			};
 
 			dma: dma-controller@ffffec00 {
@@ -448,7 +236,7 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 				clock-names = "dma_clk";
 			};
 
@@ -470,8 +258,51 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				lcd {
+					pinctrl_lcd_base: lcd-base-0 {
+						atmel,pins =
+							<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+							 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+							 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+							 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+							 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+					};
+
+					pinctrl_lcd_pwm: lcd-pwm-0 {
+						atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+					};
+
+					pinctrl_lcd_rgb888: lcd-rgb-3 {
+						atmel,pins =
+							<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+							 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+							 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+							 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+							 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+							 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+							 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+							 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+							 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+							 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+							 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+							 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+							 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+							 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+							 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+							 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+							 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+							 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+							 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+							 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+							 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+							 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+							 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+							 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
 					};
 				};
 
@@ -548,16 +379,20 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_PULL_UP	/* PC17 periph C with pullup */
-							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* PC16 periph C */
+							<AT91_PIOC 16 AT91_PERIPH_C AT91_PINCTRL_NONE
+							 AT91_PIOC 17 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
 				nand {
-					pinctrl_nand: nand-0 {
+					pinctrl_nand_rb: nand-rb-0 {
+						atmel,pins =
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+					};
+
+					pinctrl_nand_cs: nand-cs-0 {
 						atmel,pins =
-							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD5 gpio RDY pin pull_up*/
-							 AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;	/* PD4 gpio enable pin pull_up */
+							 <AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
@@ -719,7 +554,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -730,7 +565,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -741,7 +576,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -752,17 +587,18 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 			};
 
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -776,7 +612,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -784,10 +620,11 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -795,10 +632,11 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -806,10 +644,11 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -817,10 +656,11 @@
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x4000>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -836,7 +676,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				status = "disabled";
 			};
 
@@ -851,7 +691,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&twi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				status = "disabled";
 			};
 
@@ -866,7 +706,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -882,7 +722,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -891,6 +731,7 @@
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
@@ -901,6 +742,7 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -909,7 +751,7 @@
 				reg = <0xf8034000 0x300>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				status = "disabled";
 			};
 
@@ -917,45 +759,49 @@
 				compatible = "atmel,at91sam9260-udc";
 				reg = <0xf803c000 0x4000>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udphs_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
 		};
 
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = < 0x40000000 0x10000000
-				0xffffe000 0x00000600
-				0xffffe600 0x00000200
-				0x00108000 0x00018000
-			       >;
-			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			atmel,nand-has-dma;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
-				 &pioD 4 GPIO_ACTIVE_HIGH
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index eab17fcace6d..4c644d4c6be7 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9n12ek.dts - Device Tree file for AT91SAM9N12-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Hong Xu <hong.xu@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9n12.dtsi"
@@ -18,20 +17,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <16000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -51,13 +41,25 @@
 				status = "okay";
 			};
 
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			i2c0: i2c@f8010000 {
 				status = "okay";
 
 				wm8904: codec@1a {
 					compatible = "wlf,wm8904";
 					reg = <0x1a>;
-					clocks = <&pck0>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
 					clock-names = "mclk";
 				};
 
@@ -71,10 +73,6 @@
 				};
 			};
 
-			i2c1: i2c@f8014000 {
-				status = "okay";
-			};
-
 			mmc0: mmc@f0008000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc0
@@ -121,13 +119,29 @@
 			spi0: spi@f0000000 {
 				status = "okay";
 				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
+				flash@0 {
 					compatible = "atmel,at25df321a";
 					spi-max-frequency = <50000000>;
 					reg = <0>;
 				};
 			};
 
+			hlcdc: hlcdc@f8038000 {
+				status = "okay";
+
+				hlcdc-display-controller {
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+					port@0 {
+						hlcdc_panel_output: endpoint@0 {
+							reg = <0>;
+							remote-endpoint = <&panel_input>;
+						};
+					};
+				};
+			};
+
 			usb1: gadget@f803c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usb1_vbus_sense>;
@@ -144,23 +158,52 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <2>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
+
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+				};
+			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <1>;
 			atmel,vbus-gpio = <&pioB 7 GPIO_ACTIVE_LOW>;
 			status = "okay";
 		};
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "okay";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "okay";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -171,29 +214,57 @@
 		};
 
 		d9 {
-			label = "d6";
+			label = "d9";
 			gpios = <&pioB 5 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "nand-disk";
 		};
 
 		d10 {
-			label = "d7";
+			label = "d10";
 			gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		enter {
+		button-enter {
 			label = "Enter";
 			gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
 			linux,code = <28>;
-			gpio-key,wakeup;
+			wakeup-source;
+		};
+	};
+
+	panel: panel {
+		compatible = "qiaodian,qd43003c0-40";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
 		};
 	};
 
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "okay";
+	};
+
 	sound {
 		compatible = "atmel,asoc-wm8904";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi
index c9920c64791c..364a2ff0a763 100644
--- a/arch/arm/boot/dts/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/at91sam9rl.dtsi
@@ -1,19 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
  *
- *  Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
- *
- * Licensed under GPLv2 or later.
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/clock/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9RL family SoC";
 	compatible = "atmel,at91sam9rl", "atmel,at91sam9";
 	interrupt-parent = <&aic>;
@@ -37,16 +39,18 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x04000000>;
 	};
 
@@ -70,9 +74,12 @@
 		};
 	};
 
-	sram: sram@00300000 {
+	sram: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x10000>;
 	};
 
 	ahb {
@@ -81,32 +88,40 @@
 		#size-cells = <1>;
 		ranges;
 
-		fb0: fb@00500000 {
+		fb0: fb@500000 {
 			compatible = "atmel,at91sam9rl-lcdc";
 			reg = <0x00500000 0x1000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&lcd_clk>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 			clock-names = "hclk", "lcdc_clk";
 			status = "disabled";
 		};
 
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9rl-ebi";
+			#address-cells = <2>;
 			#size-cells = <1>;
-			reg = <0x40000000 0x10000000>,
-			      <0xffffe800 0x200>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			atmel,nand-has-dma;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
-				<&pioB 6 GPIO_ACTIVE_HIGH>,
-				<0>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x80000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
 		};
 
 		apb {
@@ -116,13 +131,15 @@
 			ranges;
 
 			tcb0: timer@fffa0000 {
-				compatible = "atmel,at91rm9200-tcb";
+				compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xfffa0000 0x100>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <17 IRQ_TYPE_LEVEL_HIGH 0>,
 					     <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
-				clock-names = "t0_clk", "t1_clk", "t2_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>, <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
+				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
 			mmc0: mmc@fffa4000 {
@@ -132,7 +149,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				pinctrl-names = "default";
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -143,7 +160,7 @@
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				status = "disabled";
 			};
 
@@ -159,12 +176,13 @@
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -172,12 +190,13 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -185,12 +204,13 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -198,12 +218,13 @@
 			usart3: serial@fffbc000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffbc000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -231,7 +252,7 @@
 				reg = <0xfffc8000 0x300>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 				clock-names = "pwm_clk";
 				status = "disabled";
 			};
@@ -244,114 +265,31 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
 			adc0: adc@fffd0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9rl-adc";
 				reg = <0xfffd0000 0x100>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0x3f>;
 				atmel,adc-vref = <3300>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger@0 {
-					reg = <0>;
-					trigger-name = "timer-counter-0";
-					trigger-value = <0x1>;
-				};
-				trigger@1 {
-					reg = <1>;
-					trigger-name = "timer-counter-1";
-					trigger-value = <0x3>;
-				};
-
-				trigger@2 {
-					reg = <2>;
-					trigger-name = "timer-counter-2";
-					trigger-value = <0x5>;
-				};
-
-				trigger@3 {
-					reg = <3>;
-					trigger-name = "external";
-					trigger-value = <0x13>;
-					trigger-external;
-				};
 			};
 
 			usb0: gadget@fffd4000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9rl-udc";
 				reg = <0x00600000 0x100000>,
 				      <0xfffd4000 0x4000>;
 				interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udphs_clk>, <&utmi>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
-
-				ep0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
 			};
 
 			dma0: dma-controller@ffffe600 {
@@ -359,7 +297,7 @@
 				reg = <0xffffe600 0x200>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "dma_clk";
 			};
 
@@ -368,6 +306,16 @@
 				reg = <0xffffea00 0x200>;
 			};
 
+			smc: smc@ffffec00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffec00 0x200>;
+			};
+
+			matrix: matrix@ffffee00 {
+				compatible = "atmel,at91sam9rl-matrix", "syscon";
+				reg = <0xffffee00 0x200>;
+			};
+
 			aic: interrupt-controller@fffff000 {
 				#interrupt-cells = <3>;
 				compatible = "atmel,at91rm9200-aic";
@@ -379,10 +327,11 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -442,8 +391,16 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
+							<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
@@ -511,28 +468,21 @@
 				};
 
 				nand {
-					pinctrl_nand: nand-0 {
+					pinctrl_nand_rb: nand-rb-0 {
 						atmel,pins =
-							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
+							<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 
-					pinctrl_nand0_ale_cle: nand_ale_cle-0 {
+					pinctrl_nand_cs: nand-cs-0 {
 						atmel,pins =
-							<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
-							<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 
-					pinctrl_nand0_oe_we: nand_oe_we-0 {
+					pinctrl_nand_oe_we: nand-oe-we-0 {
 						atmel,pins =
 							<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
 							<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
-
-					pinctrl_nand0_cs: nand_cs-0 {
-						atmel,pins =
-							<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
-					};
 				};
 
 				pwm0 {
@@ -663,7 +613,7 @@
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
+							<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
 							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
@@ -703,7 +653,7 @@
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
 							<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
@@ -726,7 +676,7 @@
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
 							<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
@@ -749,7 +699,7 @@
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
 							<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
-							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+							<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
@@ -776,7 +726,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -787,7 +737,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -798,7 +748,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -809,260 +759,51 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				};
 			};
 
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9g45-pmc";
+				compatible = "atmel,at91sam9rl-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 200000000 0>,
-								<190000000 240000000 2>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
-					atmel,clk-output-range = <0 94000000>;
-					atmel,clk-divisors = <1 2 4 0>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioD_clk: pioD_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi0_clk: twi0_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffd00 {
+			reset-controller@fffffd00 {
 				compatible = "atmel,at91sam9260-rstc";
 				reg = <0xfffffd00 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			shdwc@fffffd10 {
 				compatible = "atmel,at91sam9260-shdwc";
 				reg = <0xfffffd10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			watchdog@fffffd40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffd40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
-			sckc@fffffd50 {
+			clk32k: sckc@fffffd50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffd50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <1200000>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					atmel,startup-time-usec = <75>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc &slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			rtc@fffffd20 {
@@ -1083,13 +824,14 @@
 				compatible = "atmel,at91rm9200-rtc";
 				reg = <0xfffffe00 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
@@ -1103,7 +845,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
 			<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts
index 558c9f220bed..a57351270551 100644
--- a/arch/arm/boot/dts/at91sam9rlek.dts
+++ b/arch/arm/boot/dts/at91sam9rlek.dts
@@ -1,9 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
  *
- *  Copyright (C) 2014  Alexandre Belloni <alexandre.belloni@free-electrons.com>
- *
- * Licensed under GPLv2 only
+ *  Copyright (C) 2014 Microchip
+ *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
  */
 /dts-v1/;
 #include "at91sam9rl.dtsi"
@@ -17,20 +17,11 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x4000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -41,11 +32,11 @@
 	};
 
 	ahb {
-		fb0: fb@00500000 {
+		fb0: fb@500000 {
 			display = <&display0>;
 			status = "okay";
 
-			display0: display {
+			display0: panel {
 				bits-per-pixel = <16>;
 				atmel,lcdcon-backlight;
 				atmel,dmacon = <0x1>;
@@ -72,44 +63,79 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt = <1>;
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand>;
+			pinctrl-names = "default";
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			bootloader@40000 {
-				label = "bootloader";
-				reg = <0x40000 0x80000>;
-			};
-
-			bootloaderenv@c0000 {
-				label = "bootloader env";
-				reg = <0xc0000 0xc0000>;
-			};
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
 
-			dtb@180000 {
-				label = "device tree";
-				reg = <0x180000 0x80000>;
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 17 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioB 6 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						bootloader@40000 {
+							label = "bootloader";
+							reg = <0x40000 0x80000>;
+						};
+
+						bootloaderenv@c0000 {
+							label = "bootloader env";
+							reg = <0xc0000 0xc0000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
 			};
+		};
 
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
+		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
 
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x0f800000>;
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
 			};
-		};
 
-		apb {
 			mmc0: mmc@fffa4000 {
 				pinctrl-0 = <
 					&pinctrl_board_mmc0
@@ -154,7 +180,7 @@
 			spi0: spi@fffcc000 {
 				status = "okay";
 				cs-gpios = <&pioA 28 0>, <0>, <0>, <0>;
-				mtd_dataflash@0 {
+				flash@0 {
 					compatible = "atmel,at45", "atmel,dataflash";
 					spi-max-frequency = <15000000>;
 					reg = <0>;
@@ -186,61 +212,65 @@
 				status = "okay";
 			};
 
+			rtc@fffffd20 {
+				atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+			};
+
 			rtc@fffffe00 {
 				status = "okay";
 			};
 		};
 	};
 
-	pwmleds {
+	led-controller-1 {
 		compatible = "pwm-leds";
 
-		ds1 {
+		led-1 {
 			label = "ds1";
 			pwms = <&pwm0 1 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 		};
 
-		ds2 {
+		led-2 {
 			label = "ds2";
 			pwms = <&pwm0 2 5000 PWM_POLARITY_INVERTED>;
 			max-brightness = <255>;
 		};
 	};
 
-	leds {
+	led-controller-2 {
 		compatible = "gpio-leds";
 
-		ds3 {
+		led-3 {
 			label = "ds3";
 			gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		right_click {
+		button-right-click {
 			label = "right_click";
 			gpios = <&pioB 0 GPIO_ACTIVE_LOW>;
 			linux,code = <273>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		left_click {
+		button-left-click {
 			label = "left_click";
 			gpios = <&pioB 1 GPIO_ACTIVE_LOW>;
 			linux,code = <272>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 3c5fa3388997..0fe8802e1242 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
@@ -27,6 +26,10 @@
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x25ek.dts b/arch/arm/boot/dts/at91sam9x25ek.dts
index 494864836e83..ad7c6b36f0ba 100644
--- a/arch/arm/boot/dts/at91sam9x25ek.dts
+++ b/arch/arm/boot/dts/at91sam9x25ek.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9x25ek.dts - Device Tree file for AT91SAM9X25-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9x25.dtsi"
@@ -13,18 +12,24 @@
 / {
 	model = "Atmel AT91SAM9X25-EK";
 	compatible = "atmel,at91sam9x25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&can1 {
+	status = "okay";
+};
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&macb1 {
+	phy-mode = "rmii";
+	status = "okay";
+};
 
-			macb1: ethernet@f8030000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
-	};
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm0_1>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index 499cdc81f4c0..0bfa21f18f87 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -1,12 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"
+#include "at91sam9x5_lcd.dtsi"
 #include "at91sam9x5_macb0.dtsi"
 #include "at91sam9x5_can.dtsi"
 
@@ -25,6 +25,10 @@
 				       0x003fffff 0x003f8000 0x00000000  /* pioD */
 				      >;
 			};
+
+			pmc: pmc@fffffc00 {
+				compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/at91sam9x35ek.dts b/arch/arm/boot/dts/at91sam9x35ek.dts
index 343d32818ca3..66675c787b97 100644
--- a/arch/arm/boot/dts/at91sam9x35ek.dts
+++ b/arch/arm/boot/dts/at91sam9x35ek.dts
@@ -1,25 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9x35ek.dts - Device Tree file for AT91SAM9X35-EK board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 /dts-v1/;
 #include "at91sam9x35.dtsi"
+#include "at91sam9x5dm.dtsi"
 #include "at91sam9x5ek.dtsi"
 
 / {
 	model = "Atmel AT91SAM9X35-EK";
 	compatible = "atmel,at91sam9x35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
+};
+
+&backlight {
+	status = "okay";
+};
+
+&bl_reg {
+	status = "okay";
+};
+
+&hlcdc {
+	status = "okay";
+};
+
+&macb0 {
+	phy-mode = "rmii";
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
 
-	ahb {
-		apb {
-			macb0: ethernet@f802c000 {
-				phy-mode = "rmii";
-				status = "okay";
-			};
-		};
-	};
+&panel_reg {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index b6c8df8d380e..0c26c925761b 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9x5.dtsi - Device Tree Include file for AT91SAM9x5 family SoC
  *                   applies to AT91SAM9G15, AT91SAM9G25, AT91SAM9G35,
@@ -5,18 +6,18 @@
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/dma/at91.h>
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/at91.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "Atmel AT91SAM9x5 family SoC";
 	compatible = "atmel,at91sam9x5";
 	interrupt-parent = <&aic>;
@@ -39,16 +40,18 @@
 		pwm0 = &pwm0;
 	};
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x10000000>;
 	};
 
@@ -68,13 +71,16 @@
 		adc_op_clk: adc_op_clk{
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <5000000>;
+			clock-frequency = <1000000>;
 		};
 	};
 
-	sram: sram@00300000 {
+	sram: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x8000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x8000>;
 	};
 
 	ahb {
@@ -97,337 +103,82 @@
 				atmel,external-irqs = <31>;
 			};
 
+			matrix: matrix@ffffde00 {
+				compatible = "atmel,at91sam9x5-matrix", "syscon";
+				reg = <0xffffde00 0x100>;
+			};
+
+			pmecc: ecc-engine@ffffe000 {
+				compatible = "atmel,at91sam9g45-pmecc";
+				reg = <0xffffe000 0x600>,
+				      <0xffffe600 0x200>;
+			};
+
 			ramc0: ramc@ffffe800 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&ddrck>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "ddrck";
 			};
 
+			smc: smc@ffffea00 {
+				compatible = "atmel,at91sam9260-smc", "syscon";
+				reg = <0xffffea00 0x200>;
+			};
+
 			pmc: pmc@fffffc00 {
-				compatible = "atmel,at91sam9x5-pmc";
-				reg = <0xfffffc00 0x100>;
+				compatible = "atmel,at91sam9x5-pmc", "syscon";
+				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_rc_osc: main_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
-					clock-frequency = <12000000>;
-					clock-accuracy = <50000000>;
-				};
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91sam9x5-clk-main";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
-					clocks = <&main_rc_osc>, <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
-								       695000000 750000000 1 0
-								       645000000 700000000 2 0
-								       595000000 650000000 3 0
-								       545000000 600000000 0 1
-								       495000000 555000000 1 1
-								       445000000 500000000 2 1
-								       400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91sam9x5-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-					atmel,master-clk-have-div3-pres;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9x5-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9x5-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				smd: smdclk {
-					compatible = "atmel,at91sam9x5-clk-smd";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					smdck: smdck {
-						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&smd>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91sam9x5-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioAB_clk: pioAB_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioCD_clk: pioCD_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					smd_clk: smd_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <9>;
-						#clock-cells = <0>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					twi2_clk: twi2_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tcb0_clk: tcb0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					dma1_clk: dma1_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 			};
 
-			rstc@fffffe00 {
+			reset_controller: reset-controller@fffffe00 {
 				compatible = "atmel,at91sam9g45-rstc";
 				reg = <0xfffffe00 0x10>;
+				clocks = <&clk32k>;
 			};
 
-			shdwc@fffffe10 {
+			shutdown_controller: shdwc@fffffe10 {
 				compatible = "atmel,at91sam9x5-shdwc";
 				reg = <0xfffffe10 0x10>;
+				clocks = <&clk32k>;
 			};
 
 			pit: timer@fffffe30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
-			sckc@fffffe50 {
+			clk32k: sckc@fffffe50 {
 				compatible = "atmel,at91sam9x5-sckc";
 				reg = <0xfffffe50 0x4>;
-
-				slow_osc: slow_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-osc";
-					#clock-cells = <0>;
-					clocks = <&slow_xtal>;
-				};
-
-				slow_rc_osc: slow_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-slow-rc-osc";
-					#clock-cells = <0>;
-					clock-frequency = <32768>;
-					clock-accuracy = <50000000>;
-				};
-
-				clk32k: slck {
-					compatible = "atmel,at91sam9x5-clk-slow";
-					#clock-cells = <0>;
-					clocks = <&slow_rc_osc>, <&slow_osc>;
-				};
+				clocks = <&slow_xtal>;
+				#clock-cells = <0>;
 			};
 
 			tcb0: timer@f8008000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			tcb1: timer@f800c000 {
-				compatible = "atmel,at91sam9x5-tcb";
+				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>;
-				clock-names = "t0_clk";
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
+				clock-names = "t0_clk", "slow_clk";
 			};
 
 			dma0: dma-controller@ffffec00 {
@@ -435,7 +186,7 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 				clock-names = "dma_clk";
 			};
 
@@ -444,11 +195,11 @@
 				reg = <0xffffee00 0x200>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "dma_clk";
 			};
 
-			pinctrl@fffff400 {
+			pinctrl: pinctrl@fffff400 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
@@ -458,16 +209,48 @@
 				dbgu {
 					pinctrl_dbgu: dbgu-0 {
 						atmel,pins =
-							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PA9 periph A */
-							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;	/* PA10 periph A with pullup */
+							<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_PULL_UP
+							 AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+				};
+
+				ebi {
+					pinctrl_ebi_data_0_7: ebi-data-lsb-0 {
+						atmel,pins =
+							<AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_data_8_15: ebi-data-msb-0 {
+						atmel,pins =
+							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_ebi_addr_nand: ebi-addr-0 {
+						atmel,pins =
+							<AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
 					};
 				};
 
 				usart0 {
 					pinctrl_usart0: usart0-0 {
 						atmel,pins =
-							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA0 periph A with pullup */
-							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA1 periph A */
+							<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart0_rts: usart0_rts-0 {
@@ -489,8 +272,8 @@
 				usart1 {
 					pinctrl_usart1: usart1-0 {
 						atmel,pins =
-							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA5 periph A with pullup */
-							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA6 periph A */
+							<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart1_rts: usart1_rts-0 {
@@ -512,8 +295,8 @@
 				usart2 {
 					pinctrl_usart2: usart2-0 {
 						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP	/* PA7 periph A with pullup */
-							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PA8 periph A */
+							<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart2_rts: usart2_rts-0 {
@@ -549,34 +332,20 @@
 				};
 
 				nand {
-					pinctrl_nand: nand-0 {
+					pinctrl_nand_oe_we: nand-oe-we-0 {
+						atmel,pins =
+							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE
+							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+					};
+
+					pinctrl_nand_rb: nand-rb-0 {
 						atmel,pins =
-							<AT91_PIOD 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD0 periph A Read Enable */
-							 AT91_PIOD 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD1 periph A Write Enable */
-							 AT91_PIOD 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD2 periph A Address Latch Enable */
-							 AT91_PIOD 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD3 periph A Command Latch Enable */
-							 AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD4 gpio Chip Enable pin pull_up */
-							 AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP	/* PD5 gpio RDY/BUSY pin pull_up */
-							 AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD6 periph A Data bit 0 */
-							 AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD7 periph A Data bit 1 */
-							 AT91_PIOD 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD8 periph A Data bit 2 */
-							 AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD9 periph A Data bit 3 */
-							 AT91_PIOD 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD10 periph A Data bit 4 */
-							 AT91_PIOD 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD11 periph A Data bit 5 */
-							 AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD12 periph A Data bit 6 */
-							 AT91_PIOD 13 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD13 periph A Data bit 7 */
+							<AT91_PIOD 5 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 
-					pinctrl_nand_16bits: nand_16bits-0 {
+					pinctrl_nand_cs: nand-cs-0 {
 						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD14 periph A Data bit 8 */
-							 AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD15 periph A Data bit 9 */
-							 AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD16 periph A Data bit 10 */
-							 AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD17 periph A Data bit 11 */
-							 AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD18 periph A Data bit 12 */
-							 AT91_PIOD 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD19 periph A Data bit 13 */
-							 AT91_PIOD 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* PD20 periph A Data bit 14 */
-							 AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* PD21 periph A Data bit 15 */
+							<AT91_PIOD 4 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
 					};
 				};
 
@@ -824,7 +593,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -836,7 +605,7 @@
 					#gpio-lines = <19>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -847,7 +616,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -859,7 +628,7 @@
 					#gpio-lines = <22>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 			};
 
@@ -872,7 +641,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -883,8 +652,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
-				pinctrl-names = "default";
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -897,8 +665,7 @@
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
-				pinctrl-names = "default";
-				clocks = <&mci1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
 				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -908,13 +675,14 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
 				       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 				dma-names = "tx", "rx";
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -922,13 +690,14 @@
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
 				       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 				dma-names = "tx", "rx";
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -936,13 +705,14 @@
 			usart1: serial@f8020000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8020000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
 				dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
 				       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 				dma-names = "tx", "rx";
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -950,13 +720,14 @@
 			usart2: serial@f8024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8024000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
 				       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 				dma-names = "tx", "rx";
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -972,7 +743,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				status = "disabled";
 			};
 
@@ -987,7 +758,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&twi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				status = "disabled";
 			};
 
@@ -1002,17 +773,18 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c2>;
-				clocks = <&twi2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				status = "disabled";
 			};
 
 			uart0: serial@f8040000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8040000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -1020,57 +792,27 @@
 			uart1: serial@f8044000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8044000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&uart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "usart";
 				status = "disabled";
 			};
 
 			adc0: adc@f804c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9x5-adc";
 				reg = <0xf804c000 0x100>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>,
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
 					 <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xffff>;
 				atmel,adc-vref = <3300>;
 				atmel,adc-startup-time = <40>;
-				atmel,adc-res = <8 10>;
-				atmel,adc-res-names = "lowres", "highres";
-				atmel,adc-use-res = "highres";
-
-				trigger@0 {
-					reg = <0>;
-					trigger-name = "external-rising";
-					trigger-value = <0x1>;
-					trigger-external;
-				};
-
-				trigger@1 {
-					reg = <1>;
-					trigger-name = "external-falling";
-					trigger-value = <0x2>;
-					trigger-external;
-				};
-
-				trigger@2 {
-					reg = <2>;
-					trigger-name = "external-any";
-					trigger-value = <0x3>;
-					trigger-external;
-				};
-
-				trigger@3 {
-					reg = <3>;
-					trigger-name = "continuous";
-					trigger-value = <0x6>;
-				};
+				atmel,adc-sample-hold-time = <11>;
 			};
 
 			spi0: spi@f0000000 {
@@ -1084,7 +826,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -1100,89 +842,37 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
 
 			usb2: gadget@f803c000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
 				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&utmi>, <&udphs_clk>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
-
-				ep0 {
-					reg = <0>;
-					atmel,fifo-size = <64>;
-					atmel,nb-banks = <1>;
-				};
-
-				ep1 {
-					reg = <1>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep2 {
-					reg = <2>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <2>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep3 {
-					reg = <3>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep4 {
-					reg = <4>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-				};
-
-				ep5 {
-					reg = <5>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
-
-				ep6 {
-					reg = <6>;
-					atmel,fifo-size = <1024>;
-					atmel,nb-banks = <3>;
-					atmel,can-dma;
-					atmel,can-isoc;
-				};
 			};
 
-			watchdog@fffffe40 {
+			watchdog: watchdog@fffffe40 {
 				compatible = "atmel,at91sam9260-wdt";
 				reg = <0xfffffe40 0x10>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				atmel,watchdog-type = "hardware";
 				atmel,reset-type = "all";
 				atmel,dbg-halt;
 				status = "disabled";
 			};
 
-			rtc@fffffeb0 {
+			rtc: rtc@fffffeb0 {
 				compatible = "atmel,at91sam9x5-rtc";
 				reg = <0xfffffeb0 0x40>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
+				clocks = <&clk32k>;
 				status = "disabled";
 			};
 
@@ -1190,54 +880,58 @@
 				compatible = "atmel,at91sam9rl-pwm";
 				reg = <0xf8034000 0x300>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				#pwm-cells = <3>;
 				status = "disabled";
 			};
 		};
 
-		nand0: nand@40000000 {
-			compatible = "atmel,at91rm9200-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x40000000 0x10000000
-			       0xffffe000 0x600		/* PMECC Registers */
-			       0xffffe600 0x200		/* PMECC Error Location Registers */
-			       0x00108000 0x18000	/* PMECC looup table in ROM code  */
-			      >;
-			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			atmel,nand-has-dma;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_nand>;
-			gpios = <&pioD 5 GPIO_ACTIVE_HIGH
-				 &pioD 4 GPIO_ACTIVE_HIGH
-				 0
-				>;
-			status = "disabled";
-		};
-
-		usb0: ohci@00600000 {
+		usb0: ohci@600000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
 
-		usb1: ehci@00700000 {
+		usb1: ehci@700000 {
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
 			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
+
+		ebi: ebi@10000000 {
+			compatible = "atmel,at91sam9x5-ebi";
+			#address-cells = <2>;
+			#size-cells = <1>;
+			atmel,smc = <&smc>;
+			atmel,matrix = <&matrix>;
+			reg = <0x10000000 0x60000000>;
+			ranges = <0x0 0x0 0x10000000 0x10000000
+				  0x1 0x0 0x20000000 0x10000000
+				  0x2 0x0 0x30000000 0x10000000
+				  0x3 0x0 0x40000000 0x10000000
+				  0x4 0x0 0x50000000 0x10000000
+				  0x5 0x0 0x60000000 0x10000000>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
+			status = "disabled";
+
+			nand_controller: nand-controller {
+				compatible = "atmel,at91sam9g45-nand-controller";
+				ecc-engine = <&pmecc>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges;
+				status = "disabled";
+			};
+		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		compatible = "i2c-gpio";
 		gpios = <&pioA 30 GPIO_ACTIVE_HIGH /* sda */
 			 &pioA 31 GPIO_ACTIVE_HIGH /* scl */
@@ -1252,7 +946,7 @@
 		status = "disabled";
 	};
 
-	i2c@1 {
+	i2c-gpio-1 {
 		compatible = "i2c-gpio";
 		gpios = <&pioC 0 GPIO_ACTIVE_HIGH /* sda */
 			 &pioC 1 GPIO_ACTIVE_HIGH /* scl */
@@ -1267,7 +961,7 @@
 		status = "disabled";
 	};
 
-	i2c@2 {
+	i2c-gpio-2 {
 		compatible = "i2c-gpio";
 		gpios = <&pioB 4 GPIO_ACTIVE_HIGH /* sda */
 			 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
index 8eb2f9c1b978..04ccb25d342c 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
  * Ethernet interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -13,27 +12,13 @@
 / {
 	ahb {
 		apb {
-			pmc: pmc@fffffc00 {
-				periphck {
-					can0_clk: can0_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					can1_clk: can1_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
-			};
-
 			can0: can@f8000000 {
 				compatible = "atmel,at91sam9x5-can";
 				reg = <0xf8000000 0x300>;
 				interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				clocks = <&can0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
@@ -44,7 +29,7 @@
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-				clocks = <&can1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
index 8fc45ca4dcb5..4ce98f05d7db 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
  * Image Sensor Interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -44,22 +43,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-				};
-			};
-
 			isi: isi@f8048000 {
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xf8048000 0x4000>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isi_data_0_7>;
-				clocks = <&isi_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "isi_clk";
 				status = "disabled";
 				port {
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 485302e8233d..f81c9d1691e0 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
  * LCD controller.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -13,14 +12,136 @@
 / {
 	ahb {
 		apb {
-			pmc: pmc@fffffc00 {
-				periphck {
-					lcdc_clk: lcdc_clk {
-						#clock-cells = <0>;
-						reg = <25>;
+			hlcdc: hlcdc@f8038000 {
+				compatible = "atmel,at91sam9x5-hlcdc";
+				reg = <0xf8038000 0x4000>;
+				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
+				clock-names = "periph_clk","sys_clk", "slow_clk";
+				status = "disabled";
+
+				hlcdc-display-controller {
+					compatible = "atmel,hlcdc-display-controller";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						#address-cells = <1>;
+						#size-cells = <0>;
+						reg = <0>;
 					};
 				};
+
+				hlcdc_pwm: hlcdc-pwm {
+					compatible = "atmel,hlcdc-pwm";
+					pinctrl-names = "default";
+					pinctrl-0 = <&pinctrl_lcd_pwm>;
+					#pwm-cells = <3>;
+				};
 			};
 		};
 	};
 };
+
+&pinctrl {
+	lcd {
+		pinctrl_lcd_base: lcd-base-0 {
+			atmel,pins =
+				<AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDVSYNC */
+				 AT91_PIOC 28 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDHSYNC */
+				 AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDISP */
+				 AT91_PIOC 29 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDDEN */
+				 AT91_PIOC 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPCK */
+		};
+
+		pinctrl_lcd_pwm: lcd-pwm-0 {
+			atmel,pins = <AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDPWM */
+		};
+
+		pinctrl_lcd_rgb444: lcd-rgb-0 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD11 pin */
+		};
+
+		pinctrl_lcd_rgb565: lcd-rgb-1 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD15 pin */
+		};
+
+		pinctrl_lcd_rgb666: lcd-rgb-2 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD17 pin */
+		};
+
+		pinctrl_lcd_rgb888: lcd-rgb-3 {
+			atmel,pins =
+				<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD0 pin */
+				 AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD1 pin */
+				 AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD2 pin */
+				 AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD3 pin */
+				 AT91_PIOC 4 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD4 pin */
+				 AT91_PIOC 5 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD5 pin */
+				 AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD6 pin */
+				 AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD7 pin */
+				 AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD8 pin */
+				 AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD9 pin */
+				 AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD10 pin */
+				 AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD11 pin */
+				 AT91_PIOC 12 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD12 pin */
+				 AT91_PIOC 13 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD13 pin */
+				 AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD14 pin */
+				 AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD15 pin */
+				 AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD16 pin */
+				 AT91_PIOC 17 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD17 pin */
+				 AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD18 pin */
+				 AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD19 pin */
+				 AT91_PIOC 20 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD20 pin */
+				 AT91_PIOC 21 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD21 pin */
+				 AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE	/* LCDD22 pin */
+				 AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE>;	/* LCDD23 pin */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 73d7e30965ba..222aa30f6860 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
  * Ethernet interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -43,22 +42,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-				};
-			};
-
 			macb0: ethernet@f802c000 {
 				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf802c000 0x100>;
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index d81980c40c7d..26bf9b5de9ee 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
  * Ethernet interfaces.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
@@ -31,22 +30,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					macb1_clk: macb1_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-				};
-			};
-
 			macb1: ethernet@f8030000 {
 				compatible = "cdns,at91sam9260-macb", "cdns,macb";
 				reg = <0xf8030000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				clocks = <&macb1_clk>, <&macb1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 43bb5b51caa6..a47c765e1b20 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -1,14 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
  * 4 USART.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/mfd/at91-usart.h>
 
 / {
 	aliases {
@@ -21,8 +21,8 @@
 				usart3 {
 					pinctrl_usart3: usart3-0 {
 						atmel,pins =
-							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_PULL_UP	/* PC22 periph B with pullup */
-							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_NONE>;		/* PC23 periph B */
+							<AT91_PIOC 22 AT91_PERIPH_B AT91_PINCTRL_NONE
+							 AT91_PIOC 23 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>;
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
@@ -42,25 +42,17 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-				};
-			};
-
 			usart3: serial@f8028000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf8028000 0x200>;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
 				dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
 				       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
 				dma-names = "tx", "rx";
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 26112ebd15fc..cdd37f67280b 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -1,29 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9x5cm.dtsi - Device Tree Include file for AT91SAM9x5 CPU Module
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 / {
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x8000000>;
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <12000000>;
-		};
-	};
-
-	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
 		};
@@ -35,6 +23,18 @@
 
 	ahb {
 		apb {
+			tcb0: timer@f8008000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>;
+				};
+
+				timer@1 {
+					compatible = "atmel,tcb-timer";
+					reg = <1>;
+				};
+			};
+
 			pinctrl@fffff400 {
 				1wire_cm {
 					pinctrl_1wire_cm: 1wire_cm-0 {
@@ -48,38 +48,71 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;	/* Enable PMECC */
-			atmel,pmecc-cap = <2>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
+			pinctrl-0 = <&pinctrl_ebi_addr_nand
+				     &pinctrl_ebi_data_0_7>;
+			pinctrl-names = "default";
 			status = "okay";
 
-			at91bootstrap@0 {
-				label = "at91bootstrap";
-				reg = <0x0 0x40000>;
-			};
-
-			uboot@40000 {
-				label = "u-boot";
-				reg = <0x40000 0x80000>;
-			};
-
-			ubootenv@c0000 {
-				label = "U-Boot Env";
-				reg = <0xc0000 0x140000>;
-			};
-
-			kernel@200000 {
-				label = "kernel";
-				reg = <0x200000 0x600000>;
-			};
-
-			rootfs@800000 {
-				label = "rootfs";
-				reg = <0x800000 0x1f800000>;
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_oe_we
+					     &pinctrl_nand_cs
+					     &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "hw";
+					nand-ecc-strength = <2>;
+					nand-ecc-step-size = <512>;
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						at91bootstrap@0 {
+							label = "at91bootstrap";
+							reg = <0x0 0x40000>;
+						};
+
+						uboot@40000 {
+							label = "u-boot";
+							reg = <0x40000 0xc0000>;
+						};
+
+						ubootenvred@100000 {
+							label = "U-Boot Env Redundant";
+							reg = <0x100000 0x40000>;
+						};
+
+						ubootenv@140000 {
+							label = "U-Boot Env";
+							reg = <0x140000 0x40000>;
+						};
+
+						dtb@180000 {
+							label = "device tree";
+							reg = <0x180000 0x80000>;
+						};
+
+						kernel@200000 {
+							label = "kernel";
+							reg = <0x200000 0x600000>;
+						};
+
+						rootfs@800000 {
+							label = "rootfs";
+							reg = <0x800000 0x0f800000>;
+						};
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/at91sam9x5dm.dtsi b/arch/arm/boot/dts/at91sam9x5dm.dtsi
new file mode 100644
index 000000000000..a9278038af3b
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9x5dm.dtsi
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * at91sam9x5dm.dtsi - Device Tree file for SAM9x5 display module
+ *
+ *  Copyright (C) 2014 Atmel,
+ *                2014 Free Electrons
+ *
+ *  Author: Boris Brezillon <boris.brezillon@free-electrons.com>
+ */
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&bl_reg>;
+		status = "disabled";
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		status = "disabled";
+	};
+
+	panel: panel {
+		compatible = "foxlink,fl500wvr00-a0t";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		status = "disabled";
+	};
+};
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&i2c0 {
+	keyboard@1b {
+		compatible = "qt1070";
+		reg = <0x1b>;
+		interrupt-parent = <&pioA>;
+		interrupts = <7 0x0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_qt1070_irq>;
+		wakeup-source;
+	};
+};
+
+&hlcdc {
+	hlcdc-display-controller {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+
+		port@0 {
+			hlcdc_panel_output: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&panel_input>;
+			};
+		};
+	};
+};
+
+&pinctrl {
+	board {
+		pinctrl_qt1070_irq: qt1070_irq {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index d237c462dfc6..5f4eaa618ab4 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * at91sam9x5ek.dtsi - Device Tree file for AT91SAM9x5CM Base board
  *
  *  Copyright (C) 2012 Atmel,
  *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * Licensed under GPLv2 or later.
  */
 #include "at91sam9x5cm.dtsi"
 
@@ -17,162 +16,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	ahb {
-		apb {
-			mmc0: mmc@f0008000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc0
-					&pinctrl_mmc0_slot0_clk_cmd_dat0
-					&pinctrl_mmc0_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			mmc1: mmc@f000c000 {
-				pinctrl-0 = <
-					&pinctrl_board_mmc1
-					&pinctrl_mmc1_slot0_clk_cmd_dat0
-					&pinctrl_mmc1_slot0_dat1_3>;
-				status = "okay";
-				slot@0 {
-					reg = <0>;
-					bus-width = <4>;
-					cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
-				};
-			};
-
-			dbgu: serial@fffff200 {
-				status = "okay";
-			};
-
-			usart0: serial@f801c000 {
-				status = "okay";
-			};
-
-			usb2: gadget@f803c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_board_usb2>;
-				atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
-				status = "okay";
-			};
-
-			isi: isi@f8048000 {
-				status = "disabled";
-				port {
-					isi_0: endpoint@0 {
-						remote-endpoint = <&ov2640_0>;
-						bus-width = <8>;
-					};
-				};
-			};
-
-			i2c0: i2c@f8010000 {
-				status = "okay";
-
-				wm8731: wm8731@1a {
-					compatible = "wm8731";
-					reg = <0x1a>;
-				};
-
-				ov2640: camera@0x30 {
-					compatible = "ovti,ov2640";
-					reg = <0x30>;
-					pinctrl-names = "default";
-					pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
-					resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
-					pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck0>;
-					clock-names = "xvclk";
-					assigned-clocks = <&pck0>;
-					assigned-clock-rates = <25000000>;
-					status = "disabled";
-
-					port {
-						ov2640_0: endpoint {
-							remote-endpoint = <&isi_0>;
-							bus-width = <8>;
-						};
-					};
-				};
-			};
-
-			pinctrl@fffff400 {
-				camera_sensor {
-					pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
-						atmel,pins =
-							<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
-					};
-
-					pinctrl_sensor_power: sensor_power-0 {
-						atmel,pins =
-							<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-
-					pinctrl_sensor_reset: sensor_reset-0 {
-						atmel,pins =
-							<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
-					};
-				};
-
-				mmc0 {
-					pinctrl_board_mmc0: mmc0-board {
-						atmel,pins =
-							<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				mmc1 {
-					pinctrl_board_mmc1: mmc1-board {
-						atmel,pins =
-							<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
-					};
-				};
-
-				usb2 {
-					pinctrl_board_usb2: usb2-board {
-						atmel,pins =
-							<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
-					};
-				};
-			};
-
-			spi0: spi@f0000000 {
-				status = "okay";
-				cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
-				m25p80@0 {
-					compatible = "atmel,at25df321a";
-					spi-max-frequency = <50000000>;
-					reg = <0>;
-				};
-			};
-
-			watchdog@fffffe40 {
-				status = "okay";
-			};
-
-			ssc0: ssc@f0010000 {
-				status = "okay";
-			};
-		};
-
-		usb0: ohci@00600000 {
-			status = "okay";
-			num-ports = <3>;
-			atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
-					   &pioD 19 GPIO_ACTIVE_LOW
-					   &pioD 20 GPIO_ACTIVE_LOW
-					  >;
-		};
-
-		usb1: ehci@00700000 {
-			status = "okay";
-		};
-	};
-
 	sound {
 		compatible = "atmel,sam9x5-wm8731-audio";
 
@@ -188,3 +31,137 @@
 		atmel,audio-codec = <&wm8731>;
 	};
 };
+
+&adc0 {
+	atmel,adc-ts-wires = <4>;
+	atmel,adc-ts-pressure-threshold = <10000>;
+	status = "okay";
+};
+
+&dbgu {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	wm8731: wm8731@1a {
+		compatible = "wm8731";
+		reg = <0x1a>;
+	};
+};
+
+&mmc0 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc0
+		&pinctrl_mmc0_slot0_clk_cmd_dat0
+		&pinctrl_mmc0_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&mmc1 {
+	pinctrl-0 = <
+		&pinctrl_board_mmc1
+		&pinctrl_mmc1_slot0_clk_cmd_dat0
+		&pinctrl_mmc1_slot0_dat1_3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	slot@0 {
+		reg = <0>;
+		bus-width = <4>;
+		cd-gpios = <&pioD 14 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl {
+	camera_sensor {
+		pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 {
+			atmel,pins =
+				<AT91_PIOC 15 AT91_PERIPH_C AT91_PINCTRL_NONE>;	/* ISI_MCK */
+		};
+
+		pinctrl_sensor_power: sensor_power-0 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+
+		pinctrl_sensor_reset: sensor_reset-0 {
+			atmel,pins =
+				<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+		};
+	};
+
+	mmc0 {
+		pinctrl_board_mmc0: mmc0-board {
+			atmel,pins =
+				<AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD15 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	mmc1 {
+		pinctrl_board_mmc1: mmc1-board {
+			atmel,pins =
+				<AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;	/* PD14 gpio CD pin pull up and deglitch */
+		};
+	};
+
+	usb2 {
+		pinctrl_board_usb2: usb2-board {
+			atmel,pins =
+				<AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;		/* PB16 gpio vbus sense, deglitch */
+		};
+	};
+};
+
+&spi0 {
+	cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+	status = "disabled"; /* conflicts with mmc1 */
+
+	flash@0 {
+		compatible = "atmel,at25df321a";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
+};
+
+&ssc0 {
+	status = "okay";
+};
+
+&usart0 {
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	num-ports = <3>;
+	atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW *//* Activate to have access to port A */
+			   &pioD 19 GPIO_ACTIVE_LOW
+			   &pioD 20 GPIO_ACTIVE_LOW
+			  >;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_board_usb2>;
+	atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91sam9xe.dtsi b/arch/arm/boot/dts/at91sam9xe.dtsi
index 0278f63b2daf..f571f77779c3 100644
--- a/arch/arm/boot/dts/at91sam9xe.dtsi
+++ b/arch/arm/boot/dts/at91sam9xe.dtsi
@@ -1,46 +1,9 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
  * at91sam9xe.dtsi - Device Tree Include file for AT91SAM9XE family SoC
  *
  *  Copyright (C) 2015 Atmel,
  *                2015 Alexandre Belloni <alexandre.Belloni@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "at91sam9260.dtsi"
@@ -49,12 +12,15 @@
 	model = "Atmel AT91SAM9XE family SoC";
 	compatible = "atmel,at91sam9xe", "atmel,at91sam9260";
 
-	sram0: sram@002ff000 {
+	sram0: sram@2ff000 {
 		status = "disabled";
 	};
 
-	sram1: sram@00300000 {
+	sram1: sram@300000 {
 		compatible = "mmio-sram";
 		reg = <0x00300000 0x4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00300000 0x4000>;
 	};
 };
diff --git a/arch/arm/boot/dts/atlas6-evb.dts b/arch/arm/boot/dts/atlas6-evb.dts
deleted file mode 100644
index ab042ca8dea1..000000000000
--- a/arch/arm/boot/dts/atlas6-evb.dts
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 Evaluation Board
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "atlas6.dtsi"
-
-/ {
-	model = "CSR SiRFatlas6 Evaluation Board";
-	compatible = "sirf,atlas6-cb", "sirf,atlas6";
-
-	memory {
-		reg = <0x00000000 0x20000000>;
-	};
-
-	axi {
-		peri-iobg {
-			uart@b0060000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&uart1_pins_a>;
-			};
-			spi@b00d0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi0_pins_a>;
-				spi@0 {
-					compatible = "spidev";
-					reg = <0>;
-					spi-max-frequency = <1000000>;
-				};
-			};
-			spi@b0170000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi1_pins_a>;
-			};
-			i2c0: i2c@b00e0000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				lcd@40 {
-					compatible = "sirf,lcd";
-					reg = <0x40>;
-				};
-			};
-
-		};
-		disp-iobg {
-			lcd@90010000 {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcd_24pins_a>;
-			};
-		};
-	};
-	display: display@0 {
-	    panels {
-		panel0: panel@0 {
-			panel-name = "Innolux TFT";
-			hactive = <800>;
-			vactive = <480>;
-			left_margin = <20>;
-			right_margin = <234>;
-			upper_margin = <3>;
-			lower_margin = <41>;
-			hsync_len = <3>;
-			vsync_len = <2>;
-			pixclock = <33264000>;
-			sync = <3>;
-			timing = <0x88>;
-			};
-	    };
-	};
-};
diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi
deleted file mode 100644
index 29598667420b..000000000000
--- a/arch/arm/boot/dts/atlas6.dtsi
+++ /dev/null
@@ -1,802 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas6 SoC
- *
- * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,atlas6";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&intc>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			reg = <0x0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <32768>;
-			i-cache-size = <32768>;
-			/* from bootloader */
-			timebase-frequency = <0>;
-			bus-frequency = <0>;
-			clock-frequency = <0>;
-			clocks = <&clks 12>;
-			operating-points = <
-				/* kHz    uV */
-				200000  1025000
-				400000  1025000
-				600000  1050000
-				800000  1100000
-			>;
-			clock-latency = <150000>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupts = <29>;
-	};
-
-	axi {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x40000000 0x40000000 0x80000000>;
-
-		intc: interrupt-controller@80020000 {
-			#interrupt-cells = <1>;
-			interrupt-controller;
-			compatible = "sirf,prima2-intc";
-			reg = <0x80020000 0x1000>;
-		};
-
-		sys-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x88000000 0x88000000 0x40000>;
-
-			clks: clock-controller@88000000 {
-				compatible = "sirf,atlas6-clkc";
-				reg = <0x88000000 0x1000>;
-				interrupts = <3>;
-				#clock-cells = <1>;
-			};
-
-			rstc: reset-controller@88010000 {
-				compatible = "sirf,prima2-rstc";
-				reg = <0x88010000 0x1000>;
-				#reset-cells = <1>;
-			};
-
-			rsc-controller@88020000 {
-				compatible = "sirf,prima2-rsc";
-				reg = <0x88020000 0x1000>;
-			};
-
-			cphifbg@88030000 {
-				compatible = "sirf,prima2-cphifbg";
-				reg = <0x88030000 0x1000>;
-				clocks = <&clks 42>;
-			};
-		};
-
-		mem-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90000000 0x90000000 0x10000>;
-
-			memory-controller@90000000 {
-				compatible = "sirf,prima2-memc";
-				reg = <0x90000000 0x2000>;
-				interrupts = <27>;
-				clocks = <&clks 5>;
-			};
-
-			memc-monitor {
-				compatible = "sirf,prima2-memcmon";
-				reg = <0x90002000 0x200>;
-				interrupts = <4>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		disp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x90010000 0x90010000 0x30000>;
-
-			lcd@90010000 {
-				compatible = "sirf,prima2-lcd";
-				reg = <0x90010000 0x20000>;
-				interrupts = <30>;
-				clocks = <&clks 34>;
-				display=<&display>;
-				/* later transfer to pwm */
-				bl-gpio = <&gpio 7 0>;
-				default-panel = <&panel0>;
-			};
-
-			vpp@90020000 {
-				compatible = "sirf,prima2-vpp";
-				reg = <0x90020000 0x10000>;
-				interrupts = <31>;
-				clocks = <&clks 35>;
-				resets = <&rstc 6>;
-			};
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x98000000 0x98000000 0x8000000>;
-
-			graphics@98000000 {
-				compatible = "powervr,sgx510";
-				reg = <0x98000000 0x8000000>;
-				interrupts = <6>;
-				clocks = <&clks 32>;
-			};
-		};
-
-		graphics2d-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa0000000 0xa0000000 0x8000000>;
-
-			ble@a0000000 {
-				compatible = "sirf,atlas6-ble";
-				reg = <0xa0000000 0x2000>;
-				interrupts = <5>;
-				clocks = <&clks 33>;
-			};
-		};
-
-		dsp-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xa8000000 0xa8000000 0x2000000>;
-
-			dspif@a8000000 {
-				compatible = "sirf,prima2-dspif";
-				reg = <0xa8000000 0x10000>;
-				interrupts = <9>;
-				resets = <&rstc 1>;
-			};
-
-			gps@a8010000 {
-				compatible = "sirf,prima2-gps";
-				reg = <0xa8010000 0x10000>;
-				interrupts = <7>;
-				clocks = <&clks 9>;
-				resets = <&rstc 2>;
-			};
-
-			dsp@a9000000 {
-				compatible = "sirf,prima2-dsp";
-				reg = <0xa9000000 0x1000000>;
-				interrupts = <8>;
-				clocks = <&clks 8>;
-				resets = <&rstc 0>;
-			};
-		};
-
-		peri-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb0000000 0xb0000000 0x180000>,
-			       <0x56000000 0x56000000 0x1b00000>;
-
-			timer@b0020000 {
-				compatible = "sirf,prima2-tick";
-				reg = <0xb0020000 0x1000>;
-				interrupts = <0>;
-				clocks = <&clks 11>;
-			};
-
-			nand@b0030000 {
-				compatible = "sirf,prima2-nand";
-				reg = <0xb0030000 0x10000>;
-				interrupts = <41>;
-				clocks = <&clks 26>;
-			};
-
-			audio@b0040000 {
-				compatible = "sirf,prima2-audio";
-				reg = <0xb0040000 0x10000>;
-				interrupts = <35>;
-				clocks = <&clks 27>;
-			};
-
-			uart0: uart@b0050000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0050000 0x1000>;
-				interrupts = <17>;
-				fifosize = <128>;
-				clocks = <&clks 13>;
-				dmas = <&dmac1 5>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@b0060000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0060000 0x1000>;
-				interrupts = <18>;
-				fifosize = <32>;
-				clocks = <&clks 14>;
-				dma-names = "no-rx", "no-tx";
-			};
-
-			uart2: uart@b0070000 {
-				cell-index = <2>;
-				compatible = "sirf,prima2-uart";
-				reg = <0xb0070000 0x1000>;
-				interrupts = <19>;
-				fifosize = <128>;
-				clocks = <&clks 15>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp0: usp@b0080000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0080000 0x10000>;
-				interrupts = <20>;
-				fifosize = <128>;
-				clocks = <&clks 28>;
-				dmas = <&dmac1 1>, <&dmac1 2>;
-				dma-names = "rx", "tx";
-			};
-
-			usp1: usp@b0090000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-usp";
-				reg = <0xb0090000 0x10000>;
-				interrupts = <21>;
-				fifosize = <128>;
-				clocks = <&clks 29>;
-				dmas = <&dmac0 14>, <&dmac0 15>;
-				dma-names = "rx", "tx";
-			};
-
-			dmac0: dma-controller@b00b0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb00b0000 0x10000>;
-				interrupts = <12>;
-				clocks = <&clks 24>;
-				#dma-cells = <1>;
-			};
-
-			dmac1: dma-controller@b0160000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-dmac";
-				reg = <0xb0160000 0x10000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				#dma-cells = <1>;
-			};
-
-			vip@b00C0000 {
-				compatible = "sirf,prima2-vip";
-				reg = <0xb00C0000 0x10000>;
-				clocks = <&clks 31>;
-				interrupts = <14>;
-				sirf,vip-dma-rx-channel = <16>;
-			};
-
-			spi0: spi@b00d0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb00d0000 0x10000>;
-				interrupts = <15>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac1 9>,
-				     <&dmac1 4>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 19>;
-				resets = <&rstc 26>;
-				status = "disabled";
-			};
-
-			spi1: spi@b0170000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-spi";
-				reg = <0xb0170000 0x10000>;
-				interrupts = <16>;
-				sirf,spi-num-chipselects = <1>;
-				dmas = <&dmac0 12>,
-				     <&dmac0 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 20>;
-				resets = <&rstc 27>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@b00e0000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00e0000 0x10000>;
-				interrupts = <24>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 17>;
-			};
-
-			i2c1: i2c@b00f0000 {
-				cell-index = <1>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0xb00f0000 0x10000>;
-				interrupts = <25>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				clocks = <&clks 18>;
-			};
-
-			tsc@b0110000 {
-				compatible = "sirf,prima2-tsc";
-				reg = <0xb0110000 0x10000>;
-				interrupts = <33>;
-				clocks = <&clks 16>;
-			};
-
-			gpio: pinctrl@b0120000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas6-pinctrl";
-				reg = <0xb0120000 0x10000>;
-				interrupts = <43 44 45 46 47>;
-				gpio-controller;
-				interrupt-controller;
-
-				lcd_16pins_a: lcd0@0 {
-					lcd {
-						sirf,pins = "lcd_16bitsgrp";
-						sirf,function = "lcd_16bits";
-					};
-				};
-				lcd_18pins_a: lcd0@1 {
-					lcd {
-						sirf,pins = "lcd_18bitsgrp";
-						sirf,function = "lcd_18bits";
-					};
-				};
-				lcd_24pins_a: lcd0@2 {
-					lcd {
-						sirf,pins = "lcd_24bitsgrp";
-						sirf,function = "lcd_24bits";
-					};
-				};
-				lcdrom_pins_a: lcdrom0@0 {
-					lcd {
-						sirf,pins = "lcdromgrp";
-						sirf,function = "lcdrom";
-					};
-				};
-				uart0_pins_a: uart0@0 {
-					uart {
-						sirf,pins = "uart0grp";
-						sirf,function = "uart0";
-					};
-				};
-				uart0_noflow_pins_a: uart0@1 {
-					uart {
-						sirf,pins = "uart0_nostreamctrlgrp";
-						sirf,function = "uart0_nostreamctrl";
-					};
-				};
-				uart1_pins_a: uart1@0 {
-					uart {
-						sirf,pins = "uart1grp";
-						sirf,function = "uart1";
-					};
-				};
-				uart2_pins_a: uart2@0 {
-					uart {
-						sirf,pins = "uart2grp";
-						sirf,function = "uart2";
-					};
-				};
-				uart2_noflow_pins_a: uart2@1 {
-					uart {
-						sirf,pins = "uart2_nostreamctrlgrp";
-						sirf,function = "uart2_nostreamctrl";
-					};
-				};
-				spi0_pins_a: spi0@0 {
-					spi {
-						sirf,pins = "spi0grp";
-						sirf,function = "spi0";
-					};
-				};
-				spi1_pins_a: spi1@0 {
-					spi {
-						sirf,pins = "spi1grp";
-						sirf,function = "spi1";
-					};
-				};
-				i2c0_pins_a: i2c0@0 {
-					i2c {
-						sirf,pins = "i2c0grp";
-						sirf,function = "i2c0";
-					};
-				};
-				i2c1_pins_a: i2c1@0 {
-					i2c {
-						sirf,pins = "i2c1grp";
-						sirf,function = "i2c1";
-					};
-				};
-                                pwm0_pins_a: pwm0@0 {
-                                        pwm {
-                                                sirf,pins = "pwm0grp";
-                                                sirf,function = "pwm0";
-                                        };
-                                };
-                                pwm1_pins_a: pwm1@0 {
-                                        pwm {
-                                                sirf,pins = "pwm1grp";
-                                                sirf,function = "pwm1";
-                                        };
-                                };
-                                pwm2_pins_a: pwm2@0 {
-                                        pwm {
-                                                sirf,pins = "pwm2grp";
-                                                sirf,function = "pwm2";
-                                        };
-                                };
-                                pwm3_pins_a: pwm3@0 {
-                                        pwm {
-                                                sirf,pins = "pwm3grp";
-                                                sirf,function = "pwm3";
-                                        };
-                                };
-				pwm4_pins_a: pwm4@0 {
-                                        pwm {
-                                                sirf,pins = "pwm4grp";
-                                                sirf,function = "pwm4";
-                                        };
-                                };
-                                gps_pins_a: gps@0 {
-                                        gps {
-                                                sirf,pins = "gpsgrp";
-                                                sirf,function = "gps";
-                                        };
-                                };
-                                vip_pins_a: vip@0 {
-                                        vip {
-                                                sirf,pins = "vipgrp";
-                                                sirf,function = "vip";
-                                        };
-                                };
-                                sdmmc0_pins_a: sdmmc0@0 {
-                                        sdmmc0 {
-                                                sirf,pins = "sdmmc0grp";
-                                                sirf,function = "sdmmc0";
-                                        };
-                                };
-                                sdmmc1_pins_a: sdmmc1@0 {
-                                        sdmmc1 {
-                                                sirf,pins = "sdmmc1grp";
-                                                sirf,function = "sdmmc1";
-                                        };
-                                };
-                                sdmmc2_pins_a: sdmmc2@0 {
-                                        sdmmc2 {
-                                                sirf,pins = "sdmmc2grp";
-                                                sirf,function = "sdmmc2";
-                                        };
-                                };
-				sdmmc2_nowp_pins_a: sdmmc2_nowp@0 {
-                                        sdmmc2_nowp {
-                                                sirf,pins = "sdmmc2_nowpgrp";
-                                                sirf,function = "sdmmc2_nowp";
-                                        };
-                                };
-                                sdmmc3_pins_a: sdmmc3@0 {
-                                        sdmmc3 {
-                                                sirf,pins = "sdmmc3grp";
-                                                sirf,function = "sdmmc3";
-                                        };
-                                };
-                                sdmmc5_pins_a: sdmmc5@0 {
-                                        sdmmc5 {
-                                                sirf,pins = "sdmmc5grp";
-                                                sirf,function = "sdmmc5";
-                                        };
-                                };
-				i2s_mclk_pins_a: i2s_mclk@0 {
-                                        i2s_mclk {
-                                                sirf,pins = "i2smclkgrp";
-                                                sirf,function = "i2s_mclk";
-                                        };
-                                };
-				i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
-                                        i2s_ext_clk_input {
-                                                sirf,pins = "i2s_ext_clk_inputgrp";
-                                                sirf,function = "i2s_ext_clk_input";
-                                        };
-                                };
-                                i2s_pins_a: i2s@0 {
-                                        i2s {
-                                                sirf,pins = "i2sgrp";
-                                                sirf,function = "i2s";
-                                        };
-                                };
-				i2s_no_din_pins_a: i2s_no_din@0 {
-                                        i2s_no_din {
-                                                sirf,pins = "i2s_no_dingrp";
-                                                sirf,function = "i2s_no_din";
-                                        };
-                                };
-				i2s_6chn_pins_a: i2s_6chn@0 {
-                                        i2s_6chn {
-                                                sirf,pins = "i2s_6chngrp";
-                                                sirf,function = "i2s_6chn";
-                                        };
-                                };
-                                ac97_pins_a: ac97@0 {
-                                        ac97 {
-                                                sirf,pins = "ac97grp";
-                                                sirf,function = "ac97";
-                                        };
-                                };
-                                nand_pins_a: nand@0 {
-                                        nand {
-                                                sirf,pins = "nandgrp";
-                                                sirf,function = "nand";
-                                        };
-                                };
-                                usp0_pins_a: usp0@0 {
-                                        usp0 {
-                                                sirf,pins = "usp0grp";
-                                                sirf,function = "usp0";
-                                        };
-                                };
-				usp0_uart_nostreamctrl_pins_a: usp0@1 {
-                                        usp0 {
-                                                sirf,pins = "usp0_uart_nostreamctrl_grp";
-                                                sirf,function = "usp0_uart_nostreamctrl";
-                                        };
-                                };
-				usp0_only_utfs_pins_a: usp0@2 {
-					usp0 {
-						sirf,pins = "usp0_only_utfs_grp";
-						sirf,function = "usp0_only_utfs";
-					};
-				};
-				usp0_only_urfs_pins_a: usp0@3 {
-					usp0 {
-						sirf,pins = "usp0_only_urfs_grp";
-						sirf,function = "usp0_only_urfs";
-					};
-				};
-                                usp1_pins_a: usp1@0 {
-                                        usp1 {
-                                                sirf,pins = "usp1grp";
-                                                sirf,function = "usp1";
-                                        };
-                                };
-				usp1_uart_nostreamctrl_pins_a: usp1@1 {
-                                        usp1 {
-                                                sirf,pins = "usp1_uart_nostreamctrl_grp";
-                                                sirf,function = "usp1_uart_nostreamctrl";
-                                        };
-                                };
-                                usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 {
-                                        usb0_upli_drvbus {
-                                                sirf,pins = "usb0_upli_drvbusgrp";
-                                                sirf,function = "usb0_upli_drvbus";
-                                        };
-                                };
-                                usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 {
-                                        usb1_utmi_drvbus {
-                                                sirf,pins = "usb1_utmi_drvbusgrp";
-                                                sirf,function = "usb1_utmi_drvbus";
-                                        };
-                                };
-                                usb1_dp_dn_pins_a: usb1_dp_dn@0 {
-                                        usb1_dp_dn {
-                                                sirf,pins = "usb1_dp_dngrp";
-                                                sirf,function = "usb1_dp_dn";
-                                        };
-                                };
-                                uart1_route_io_usb1_pins_a: uart1_route_io_usb1@0 {
-                                        uart1_route_io_usb1 {
-                                                sirf,pins = "uart1_route_io_usb1grp";
-                                                sirf,function = "uart1_route_io_usb1";
-                                        };
-                                };
-                                warm_rst_pins_a: warm_rst@0 {
-                                        warm_rst {
-                                                sirf,pins = "warm_rstgrp";
-                                                sirf,function = "warm_rst";
-                                        };
-                                };
-                                pulse_count_pins_a: pulse_count@0 {
-                                        pulse_count {
-                                                sirf,pins = "pulse_countgrp";
-                                                sirf,function = "pulse_count";
-                                        };
-                                };
-                                cko0_pins_a: cko0@0 {
-                                        cko0 {
-                                                sirf,pins = "cko0grp";
-                                                sirf,function = "cko0";
-                                        };
-                                };
-                                cko1_pins_a: cko1@0 {
-                                        cko1 {
-                                                sirf,pins = "cko1grp";
-                                                sirf,function = "cko1";
-                                        };
-                                };
-			};
-
-			pwm@b0130000 {
-				compatible = "sirf,prima2-pwm";
-				reg = <0xb0130000 0x10000>;
-				clocks = <&clks 21>;
-			};
-
-			efusesys@b0140000 {
-				compatible = "sirf,prima2-efuse";
-				reg = <0xb0140000 0x10000>;
-				clocks = <&clks 22>;
-			};
-
-			pulsec@b0150000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0xb0150000 0x10000>;
-				interrupts = <48>;
-				clocks = <&clks 23>;
-			};
-
-			pci-iobg {
-				compatible = "sirf,prima2-pciiobg", "simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x56000000 0x56000000 0x1b00000>;
-
-				sd0: sdhci@56000000 {
-					cell-index = <0>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56000000 0x100000>;
-					interrupts = <38>;
-					bus-width = <8>;
-					clocks = <&clks 36>;
-				};
-
-				sd1: sdhci@56100000 {
-					cell-index = <1>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56100000 0x100000>;
-					interrupts = <38>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 36>;
-				};
-
-				sd2: sdhci@56200000 {
-					cell-index = <2>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56200000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd3: sdhci@56300000 {
-					cell-index = <3>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56300000 0x100000>;
-					interrupts = <23>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 37>;
-				};
-
-				sd5: sdhci@56500000 {
-					cell-index = <5>;
-					compatible = "sirf,prima2-sdhc";
-					reg = <0x56500000 0x100000>;
-					interrupts = <39>;
-					status = "disabled";
-					bus-width = <4>;
-					clocks = <&clks 38>;
-				};
-
-				pci-copy@57900000 {
-					compatible = "sirf,prima2-pcicp";
-					reg = <0x57900000 0x100000>;
-					interrupts = <40>;
-				};
-
-				rom-interface@57a00000 {
-					compatible = "sirf,prima2-romif";
-					reg = <0x57a00000 0x100000>;
-				};
-			};
-		};
-
-		rtc-iobg {
-			compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x80030000 0x10000>;
-
-			gpsrtc@1000 {
-				compatible = "sirf,prima2-gpsrtc";
-				reg = <0x1000 0x1000>;
-				interrupts = <55 56 57>;
-			};
-
-			sysrtc@2000 {
-				compatible = "sirf,prima2-sysrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <52 53 54>;
-			};
-
-			minigpsrtc@2000 {
-				compatible = "sirf,prima2-minigpsrtc";
-				reg = <0x2000 0x1000>;
-				interrupts = <54>;
-			};
-
-			pwrc@3000 {
-				compatible = "sirf,prima2-pwrc";
-				reg = <0x3000 0x1000>;
-				interrupts = <32>;
-			};
-		};
-
-		uus-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0xb8000000 0xb8000000 0x40000>;
-
-			usb0: usb@b00e0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8000000 0x10000>;
-				interrupts = <10>;
-				clocks = <&clks 40>;
-			};
-
-			usb1: usb@b00f0000 {
-				compatible = "chipidea,ci13611a-prima2";
-				reg = <0xb8010000 0x10000>;
-				interrupts = <11>;
-				clocks = <&clks 41>;
-			};
-
-			security@b00f0000 {
-				compatible = "sirf,prima2-security";
-				reg = <0xb8030000 0x10000>;
-				interrupts = <42>;
-				clocks = <&clks 7>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/atlas7-evb.dts b/arch/arm/boot/dts/atlas7-evb.dts
deleted file mode 100644
index 49cf59a95572..000000000000
--- a/arch/arm/boot/dts/atlas7-evb.dts
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas7 Evaluation Board
- *
- * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/dts-v1/;
-
-/include/ "atlas7.dtsi"
-
-/ {
-	model = "CSR SiRFatlas7 Evaluation Board";
-	compatible = "sirf,atlas7-cb", "sirf,atlas7";
-
-	chosen {
-		bootargs = "console=ttySiRF1,115200 earlyprintk";
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x40000000 0x20000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		vpp_reserved: vpp_mem@5e800000 {
-			compatible = "sirf,reserved-memory";
-			reg = <0x5e800000 0x800000>;
-		};
-
-		nanddisk_reserved: nanddisk@46000000 {
-			reg = <0x46000000 0x200000>;
-			no-map;
-		};
-	};
-
-
-	noc {
-		mediam {
-			nand@17050000 {
-				memory-region = <&nanddisk_reserved>;
-			};
-		};
-
-		gnssm {
-			spi1: spi@18200000 {
-				status = "okay";
-				spiflash: macronix@0{
-					status = "okay";
-					compatible = "macronix,mx25l6405d";
-					reg = <0>;
-					spi-max-frequency = <37500000>;
-					spi-cpha;
-					spi-cpol;
-					#address-cells = <1>;
-					#size-cells = <1>;
-					partitions@0 {
-						label = "myspiboot";
-						reg = <0x0 0x800000>;
-					};
-				};
-			};
-		};
-
-		btm {
-			uart6: uart@11000000 {
-				status = "okay";
-				sirf,uart-has-rtscts;
-			};
-		};
-
-		disp-iobg {
-			vpp@13110000 {
-				memory-region = <&vpp_reserved>;
-			};
-		};
-
-		display0: display@0 {
-			compatible = "lvds-panel";
-			source = "lvds.0";
-
-			bl-gpios = <&gpio_1 63 0>;
-			data-lines  = <24>;
-
-			display-timings {
-				native-mode = <&timing0>;
-				timing0: timing0 {
-					clock-frequency = <60000000>;
-					hactive = <1024>;
-					vactive = <600>;
-					hfront-porch = <220>;
-					hback-porch = <100>;
-					hsync-len = <1>;
-					vback-porch = <10>;
-					vfront-porch = <25>;
-					vsync-len = <1>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <1>;
-				};
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/atlas7.dtsi b/arch/arm/boot/dts/atlas7.dtsi
deleted file mode 100644
index 3e21311f9514..000000000000
--- a/arch/arm/boot/dts/atlas7.dtsi
+++ /dev/null
@@ -1,1868 +0,0 @@
-/*
- * DTS file for CSR SiRFatlas7 SoC
- *
- * Copyright (c) 2014 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-/include/ "skeleton.dtsi"
-/ {
-	compatible = "sirf,atlas7";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&gic>;
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		serial5 = &uart5;
-		serial6 = &uart6;
-		serial9 = &usp2;
-	};
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-		};
-	};
-
-	clocks {
-		xinw {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-			clock-output-names = "xinw";
-		};
-		xin {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-			clock-output-names = "xin";
-		};
-	};
-
-	noc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x10000000 0x10000000 0xc0000000>;
-
-		gic: interrupt-controller@10301000 {
-			compatible = "arm,cortex-a9-gic";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x10301000 0x1000>,
-			     <0x10302000 0x0100>;
-		};
-
-		pmu_regulator: pmu_regulator@10E30020 {
-			compatible = "sirf,atlas7-pmu-ldo";
-			reg = <0x10E30020 0x4>;
-			ldo: ldo {
-				regulator-name = "ldo";
-			};
-		};
-
-		atlas7_codec: atlas7_codec@10E30000 {
-			#sound-dai-cells = <0>;
-			compatible = "sirf,atlas7-codec";
-			reg = <0x10E30000 0x400>;
-			clocks = <&car 62>;
-			ldo-supply = <&ldo>;
-		};
-
-		atlas7_iacc: atlas7_iacc@10D01000 {
-			#sound-dai-cells = <0>;
-			compatible = "sirf,atlas7-iacc";
-			reg = <0x10D01000 0x100>;
-			dmas = <&dmac3 0>, <&dmac3 7>, <&dmac3 8>,
-				<&dmac3 3>, <&dmac3 9>;
-			dma-names = "rx", "tx0", "tx1", "tx2", "tx3";
-			clocks = <&car 62>;
-		};
-
-		ipc@13240000 {
-			compatible = "sirf,atlas7-ipc";
-			ranges = <0x13240000 0x13240000 0x00010000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			hwspinlock {
-				compatible = "sirf,hwspinlock";
-				reg = <0x13240000 0x00010000>;
-
-				num-spinlocks = <30>;
-			};
-
-			ns_m3_rproc@0 {
-				compatible = "sirf,ns2m30-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 123 0>;
-			};
-
-			ns_m3_rproc@1 {
-				compatible = "sirf,ns2m31-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 126 0>;
-			};
-
-			ns_kal_rproc@0 {
-				compatible = "sirf,ns2kal0-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 124 0>;
-			};
-
-			ns_kal_rproc@1 {
-				compatible = "sirf,ns2kal1-rproc";
-				reg = <0x13240000 0x00010000>;
-				interrupts = <0 127 0>;
-			};
-		};
-
-		pinctrl: ioc@18880000 {
-			compatible = "sirf,atlas7-ioc";
-			reg = <0x18880000 0x1000>,
-				<0x10E40000 0x1000>;
-
-			audio_ac97_pmx: audio_ac97@0 {
-				audio_ac97 {
-					groups = "audio_ac97_grp";
-					function = "audio_ac97";
-				};
-			};
-
-			audio_func_dbg_pmx: audio_func_dbg@0 {
-				audio_func_dbg {
-					groups = "audio_func_dbg_grp";
-					function = "audio_func_dbg";
-				};
-			};
-
-			audio_i2s_pmx: audio_i2s@0 {
-				audio_i2s {
-					groups = "audio_i2s_grp";
-					function = "audio_i2s";
-				};
-			};
-
-			audio_i2s_2ch_pmx: audio_i2s_2ch@0 {
-				audio_i2s_2ch {
-					groups = "audio_i2s_2ch_grp";
-					function = "audio_i2s_2ch";
-				};
-			};
-
-			audio_i2s_extclk_pmx: audio_i2s_extclk@0 {
-				audio_i2s_extclk {
-					groups = "audio_i2s_extclk_grp";
-					function = "audio_i2s_extclk";
-				};
-			};
-
-			audio_uart0_pmx: audio_uart0@0 {
-				audio_uart0 {
-					groups = "audio_uart0_grp";
-					function = "audio_uart0";
-				};
-			};
-
-			audio_uart1_pmx: audio_uart1@0 {
-				audio_uart1 {
-					groups = "audio_uart1_grp";
-					function = "audio_uart1";
-				};
-			};
-
-			audio_uart2_pmx0: audio_uart2@0 {
-				audio_uart2_0 {
-					groups = "audio_uart2_grp0";
-					function = "audio_uart2_m0";
-				};
-			};
-
-			audio_uart2_pmx1: audio_uart2@1 {
-				audio_uart2_1 {
-					groups = "audio_uart2_grp1";
-					function = "audio_uart2_m1";
-				};
-			};
-
-			c_can_trnsvr_pmx: c_can_trnsvr@0 {
-				c_can_trnsvr {
-					groups = "c_can_trnsvr_grp";
-					function = "c_can_trnsvr";
-				};
-			};
-
-			c0_can_pmx0: c0_can@0 {
-				c0_can_0 {
-					groups = "c0_can_grp0";
-					function = "c0_can_m0";
-				};
-			};
-
-			c0_can_pmx1: c0_can@1 {
-				c0_can_1 {
-					groups = "c0_can_grp1";
-					function = "c0_can_m1";
-				};
-			};
-
-			c1_can_pmx0: c1_can@0 {
-				c1_can_0 {
-					groups = "c1_can_grp0";
-					function = "c1_can_m0";
-				};
-			};
-
-			c1_can_pmx1: c1_can@1 {
-				c1_can_1 {
-					groups = "c1_can_grp1";
-					function = "c1_can_m1";
-				};
-			};
-
-			c1_can_pmx2: c1_can@2 {
-				c1_can_2 {
-					groups = "c1_can_grp2";
-					function = "c1_can_m2";
-				};
-			};
-
-			ca_audio_lpc_pmx: ca_audio_lpc@0 {
-				ca_audio_lpc {
-					groups = "ca_audio_lpc_grp";
-					function = "ca_audio_lpc";
-				};
-			};
-
-			ca_bt_lpc_pmx: ca_bt_lpc@0 {
-				ca_bt_lpc {
-					groups = "ca_bt_lpc_grp";
-					function = "ca_bt_lpc";
-				};
-			};
-
-			ca_coex_pmx: ca_coex@0 {
-				ca_coex {
-					groups = "ca_coex_grp";
-					function = "ca_coex";
-				};
-			};
-
-			ca_curator_lpc_pmx: ca_curator_lpc@0 {
-				ca_curator_lpc {
-					groups = "ca_curator_lpc_grp";
-					function = "ca_curator_lpc";
-				};
-			};
-
-			ca_pcm_debug_pmx: ca_pcm_debug@0 {
-				ca_pcm_debug {
-					groups = "ca_pcm_debug_grp";
-					function = "ca_pcm_debug";
-				};
-			};
-
-			ca_pio_pmx: ca_pio@0 {
-				ca_pio {
-					groups = "ca_pio_grp";
-					function = "ca_pio";
-				};
-			};
-
-			ca_sdio_debug_pmx: ca_sdio_debug@0 {
-				ca_sdio_debug {
-					groups = "ca_sdio_debug_grp";
-					function = "ca_sdio_debug";
-				};
-			};
-
-			ca_spi_pmx: ca_spi@0 {
-				ca_spi {
-					groups = "ca_spi_grp";
-					function = "ca_spi";
-				};
-			};
-
-			ca_trb_pmx: ca_trb@0 {
-				ca_trb {
-					groups = "ca_trb_grp";
-					function = "ca_trb";
-				};
-			};
-
-			ca_uart_debug_pmx: ca_uart_debug@0 {
-				ca_uart_debug {
-					groups = "ca_uart_debug_grp";
-					function = "ca_uart_debug";
-				};
-			};
-
-			clkc_pmx0: clkc@0 {
-				clkc_0 {
-					groups = "clkc_grp0";
-					function = "clkc_m0";
-				};
-			};
-
-			clkc_pmx1: clkc@1 {
-				clkc_1 {
-					groups = "clkc_grp1";
-					function = "clkc_m1";
-				};
-			};
-
-			gn_gnss_i2c_pmx: gn_gnss_i2c@0 {
-				gn_gnss_i2c {
-					groups = "gn_gnss_i2c_grp";
-					function = "gn_gnss_i2c";
-				};
-			};
-
-			gn_gnss_uart_nopause_pmx: gn_gnss_uart_nopause@0 {
-				gn_gnss_uart_nopause {
-					groups = "gn_gnss_uart_nopause_grp";
-					function = "gn_gnss_uart_nopause";
-				};
-			};
-
-			gn_gnss_uart_pmx: gn_gnss_uart@0 {
-				gn_gnss_uart {
-					groups = "gn_gnss_uart_grp";
-					function = "gn_gnss_uart";
-				};
-			};
-
-			gn_trg_spi_pmx0: gn_trg_spi@0 {
-				gn_trg_spi_0 {
-					groups = "gn_trg_spi_grp0";
-					function = "gn_trg_spi_m0";
-				};
-			};
-
-			gn_trg_spi_pmx1: gn_trg_spi@1 {
-				gn_trg_spi_1 {
-					groups = "gn_trg_spi_grp1";
-					function = "gn_trg_spi_m1";
-				};
-			};
-
-			cvbs_dbg_pmx: cvbs_dbg@0 {
-				cvbs_dbg {
-					groups = "cvbs_dbg_grp";
-					function = "cvbs_dbg";
-				};
-			};
-
-			cvbs_dbg_test_pmx0: cvbs_dbg_test@0 {
-				cvbs_dbg_test_0 {
-					groups = "cvbs_dbg_test_grp0";
-					function = "cvbs_dbg_test_m0";
-				};
-			};
-
-			cvbs_dbg_test_pmx1: cvbs_dbg_test@1 {
-				cvbs_dbg_test_1 {
-					groups = "cvbs_dbg_test_grp1";
-					function = "cvbs_dbg_test_m1";
-				};
-			};
-
-			cvbs_dbg_test_pmx2: cvbs_dbg_test@2 {
-				cvbs_dbg_test_2 {
-					groups = "cvbs_dbg_test_grp2";
-					function = "cvbs_dbg_test_m2";
-				};
-			};
-
-			cvbs_dbg_test_pmx3: cvbs_dbg_test@3 {
-				cvbs_dbg_test_3 {
-					groups = "cvbs_dbg_test_grp3";
-					function = "cvbs_dbg_test_m3";
-				};
-			};
-
-			cvbs_dbg_test_pmx4: cvbs_dbg_test@4 {
-				cvbs_dbg_test_4 {
-					groups = "cvbs_dbg_test_grp4";
-					function = "cvbs_dbg_test_m4";
-				};
-			};
-
-			cvbs_dbg_test_pmx5: cvbs_dbg_test@5 {
-				cvbs_dbg_test_5 {
-					groups = "cvbs_dbg_test_grp5";
-					function = "cvbs_dbg_test_m5";
-				};
-			};
-
-			cvbs_dbg_test_pmx6: cvbs_dbg_test@6 {
-				cvbs_dbg_test_6 {
-					groups = "cvbs_dbg_test_grp6";
-					function = "cvbs_dbg_test_m6";
-				};
-			};
-
-			cvbs_dbg_test_pmx7: cvbs_dbg_test@7 {
-				cvbs_dbg_test_7 {
-					groups = "cvbs_dbg_test_grp7";
-					function = "cvbs_dbg_test_m7";
-				};
-			};
-
-			cvbs_dbg_test_pmx8: cvbs_dbg_test@8 {
-				cvbs_dbg_test_8 {
-					groups = "cvbs_dbg_test_grp8";
-					function = "cvbs_dbg_test_m8";
-				};
-			};
-
-			cvbs_dbg_test_pmx9: cvbs_dbg_test@9 {
-				cvbs_dbg_test_9 {
-					groups = "cvbs_dbg_test_grp9";
-					function = "cvbs_dbg_test_m9";
-				};
-			};
-
-			cvbs_dbg_test_pmx10: cvbs_dbg_test@10 {
-				cvbs_dbg_test_10 {
-					groups = "cvbs_dbg_test_grp10";
-					function = "cvbs_dbg_test_m10";
-				};
-			};
-
-			cvbs_dbg_test_pmx11: cvbs_dbg_test@11 {
-				cvbs_dbg_test_11 {
-					groups = "cvbs_dbg_test_grp11";
-					function = "cvbs_dbg_test_m11";
-				};
-			};
-
-			cvbs_dbg_test_pmx12: cvbs_dbg_test@12 {
-				cvbs_dbg_test_12 {
-					groups = "cvbs_dbg_test_grp12";
-					function = "cvbs_dbg_test_m12";
-				};
-			};
-
-			cvbs_dbg_test_pmx13: cvbs_dbg_test@13 {
-				cvbs_dbg_test_13 {
-					groups = "cvbs_dbg_test_grp13";
-					function = "cvbs_dbg_test_m13";
-				};
-			};
-
-			cvbs_dbg_test_pmx14: cvbs_dbg_test@14 {
-				cvbs_dbg_test_14 {
-					groups = "cvbs_dbg_test_grp14";
-					function = "cvbs_dbg_test_m14";
-				};
-			};
-
-			cvbs_dbg_test_pmx15: cvbs_dbg_test@15 {
-				cvbs_dbg_test_15 {
-					groups = "cvbs_dbg_test_grp15";
-					function = "cvbs_dbg_test_m15";
-				};
-			};
-
-			gn_gnss_power_pmx: gn_gnss_power@0 {
-				gn_gnss_power {
-					groups = "gn_gnss_power_grp";
-					function = "gn_gnss_power";
-				};
-			};
-
-			gn_gnss_sw_status_pmx: gn_gnss_sw_status@0 {
-				gn_gnss_sw_status {
-					groups = "gn_gnss_sw_status_grp";
-					function = "gn_gnss_sw_status";
-				};
-			};
-
-			gn_gnss_eclk_pmx: gn_gnss_eclk@0 {
-				gn_gnss_eclk {
-					groups = "gn_gnss_eclk_grp";
-					function = "gn_gnss_eclk";
-				};
-			};
-
-			gn_gnss_irq1_pmx0: gn_gnss_irq1@0 {
-				gn_gnss_irq1_0 {
-					groups = "gn_gnss_irq1_grp0";
-					function = "gn_gnss_irq1_m0";
-				};
-			};
-
-			gn_gnss_irq2_pmx0: gn_gnss_irq2@0 {
-				gn_gnss_irq2_0 {
-					groups = "gn_gnss_irq2_grp0";
-					function = "gn_gnss_irq2_m0";
-				};
-			};
-
-			gn_gnss_tm_pmx: gn_gnss_tm@0 {
-				gn_gnss_tm {
-					groups = "gn_gnss_tm_grp";
-					function = "gn_gnss_tm";
-				};
-			};
-
-			gn_gnss_tsync_pmx: gn_gnss_tsync@0 {
-				gn_gnss_tsync {
-					groups = "gn_gnss_tsync_grp";
-					function = "gn_gnss_tsync";
-				};
-			};
-
-			gn_io_gnsssys_sw_cfg_pmx: gn_io_gnsssys_sw_cfg@0 {
-				gn_io_gnsssys_sw_cfg {
-					groups = "gn_io_gnsssys_sw_cfg_grp";
-					function = "gn_io_gnsssys_sw_cfg";
-				};
-			};
-
-			gn_trg_pmx0: gn_trg@0 {
-				gn_trg_0 {
-					groups = "gn_trg_grp0";
-					function = "gn_trg_m0";
-				};
-			};
-
-			gn_trg_pmx1: gn_trg@1 {
-				gn_trg_1 {
-					groups = "gn_trg_grp1";
-					function = "gn_trg_m1";
-				};
-			};
-
-			gn_trg_shutdown_pmx0: gn_trg_shutdown@0 {
-				gn_trg_shutdown_0 {
-					groups = "gn_trg_shutdown_grp0";
-					function = "gn_trg_shutdown_m0";
-				};
-			};
-
-			gn_trg_shutdown_pmx1: gn_trg_shutdown@1 {
-				gn_trg_shutdown_1 {
-					groups = "gn_trg_shutdown_grp1";
-					function = "gn_trg_shutdown_m1";
-				};
-			};
-
-			gn_trg_shutdown_pmx2: gn_trg_shutdown@2 {
-				gn_trg_shutdown_2 {
-					groups = "gn_trg_shutdown_grp2";
-					function = "gn_trg_shutdown_m2";
-				};
-			};
-
-			gn_trg_shutdown_pmx3: gn_trg_shutdown@3 {
-				gn_trg_shutdown_3 {
-					groups = "gn_trg_shutdown_grp3";
-					function = "gn_trg_shutdown_m3";
-				};
-			};
-
-			i2c0_pmx: i2c0@0 {
-				i2c0 {
-					groups = "i2c0_grp";
-					function = "i2c0";
-				};
-			};
-
-			i2c1_pmx: i2c1@0 {
-				i2c1 {
-					groups = "i2c1_grp";
-					function = "i2c1";
-				};
-			};
-
-			jtag_pmx0: jtag@0 {
-				jtag_0 {
-					groups = "jtag_grp0";
-					function = "jtag_m0";
-				};
-			};
-
-			ks_kas_spi_pmx0: ks_kas_spi@0 {
-				ks_kas_spi_0 {
-					groups = "ks_kas_spi_grp0";
-					function = "ks_kas_spi_m0";
-				};
-			};
-
-			ld_ldd_pmx: ld_ldd@0 {
-				ld_ldd {
-					groups = "ld_ldd_grp";
-					function = "ld_ldd";
-				};
-			};
-
-			ld_ldd_16bit_pmx: ld_ldd_16bit@0 {
-				ld_ldd_16bit {
-					groups = "ld_ldd_16bit_grp";
-					function = "ld_ldd_16bit";
-				};
-			};
-
-			ld_ldd_fck_pmx: ld_ldd_fck@0 {
-				ld_ldd_fck {
-					groups = "ld_ldd_fck_grp";
-					function = "ld_ldd_fck";
-				};
-			};
-
-			ld_ldd_lck_pmx: ld_ldd_lck@0 {
-				ld_ldd_lck {
-					groups = "ld_ldd_lck_grp";
-					function = "ld_ldd_lck";
-				};
-			};
-
-			lr_lcdrom_pmx: lr_lcdrom@0 {
-				lr_lcdrom {
-					groups = "lr_lcdrom_grp";
-					function = "lr_lcdrom";
-				};
-			};
-
-			lvds_analog_pmx: lvds_analog@0 {
-				lvds_analog {
-					groups = "lvds_analog_grp";
-					function = "lvds_analog";
-				};
-			};
-
-			nd_df_pmx: nd_df@0 {
-				nd_df {
-					groups = "nd_df_grp";
-					function = "nd_df";
-				};
-			};
-
-			nd_df_nowp_pmx: nd_df_nowp@0 {
-				nd_df_nowp {
-					groups = "nd_df_nowp_grp";
-					function = "nd_df_nowp";
-				};
-			};
-
-			ps_pmx: ps@0 {
-				ps {
-					groups = "ps_grp";
-					function = "ps";
-				};
-			};
-
-			pwc_core_on_pmx: pwc_core_on@0 {
-				pwc_core_on {
-					groups = "pwc_core_on_grp";
-					function = "pwc_core_on";
-				};
-			};
-
-			pwc_ext_on_pmx: pwc_ext_on@0 {
-				pwc_ext_on {
-					groups = "pwc_ext_on_grp";
-					function = "pwc_ext_on";
-				};
-			};
-
-			pwc_gpio3_clk_pmx: pwc_gpio3_clk@0 {
-				pwc_gpio3_clk {
-					groups = "pwc_gpio3_clk_grp";
-					function = "pwc_gpio3_clk";
-				};
-			};
-
-			pwc_io_on_pmx: pwc_io_on@0 {
-				pwc_io_on {
-					groups = "pwc_io_on_grp";
-					function = "pwc_io_on";
-				};
-			};
-
-			pwc_lowbatt_b_pmx0: pwc_lowbatt_b@0 {
-				pwc_lowbatt_b_0 {
-					groups = "pwc_lowbatt_b_grp0";
-					function = "pwc_lowbatt_b_m0";
-				};
-			};
-
-			pwc_mem_on_pmx: pwc_mem_on@0 {
-				pwc_mem_on {
-					groups = "pwc_mem_on_grp";
-					function = "pwc_mem_on";
-				};
-			};
-
-			pwc_on_key_b_pmx0: pwc_on_key_b@0 {
-				pwc_on_key_b_0 {
-					groups = "pwc_on_key_b_grp0";
-					function = "pwc_on_key_b_m0";
-				};
-			};
-
-			pwc_wakeup_src0_pmx: pwc_wakeup_src0@0 {
-				pwc_wakeup_src0 {
-					groups = "pwc_wakeup_src0_grp";
-					function = "pwc_wakeup_src0";
-				};
-			};
-
-			pwc_wakeup_src1_pmx: pwc_wakeup_src1@0 {
-				pwc_wakeup_src1 {
-					groups = "pwc_wakeup_src1_grp";
-					function = "pwc_wakeup_src1";
-				};
-			};
-
-			pwc_wakeup_src2_pmx: pwc_wakeup_src2@0 {
-				pwc_wakeup_src2 {
-					groups = "pwc_wakeup_src2_grp";
-					function = "pwc_wakeup_src2";
-				};
-			};
-
-			pwc_wakeup_src3_pmx: pwc_wakeup_src3@0 {
-				pwc_wakeup_src3 {
-					groups = "pwc_wakeup_src3_grp";
-					function = "pwc_wakeup_src3";
-				};
-			};
-
-			pw_cko0_pmx0: pw_cko0@0 {
-				pw_cko0_0 {
-					groups = "pw_cko0_grp0";
-					function = "pw_cko0_m0";
-				};
-			};
-
-			pw_cko0_pmx1: pw_cko0@1 {
-				pw_cko0_1 {
-					groups = "pw_cko0_grp1";
-					function = "pw_cko0_m1";
-				};
-			};
-
-			pw_cko0_pmx2: pw_cko0@2 {
-				pw_cko0_2 {
-					groups = "pw_cko0_grp2";
-					function = "pw_cko0_m2";
-				};
-			};
-
-			pw_cko1_pmx0: pw_cko1@0 {
-				pw_cko1_0 {
-					groups = "pw_cko1_grp0";
-					function = "pw_cko1_m0";
-				};
-			};
-
-			pw_cko1_pmx1: pw_cko1@1 {
-				pw_cko1_1 {
-					groups = "pw_cko1_grp1";
-					function = "pw_cko1_m1";
-				};
-			};
-
-			pw_i2s01_clk_pmx0: pw_i2s01_clk@0 {
-				pw_i2s01_clk_0 {
-					groups = "pw_i2s01_clk_grp0";
-					function = "pw_i2s01_clk_m0";
-				};
-			};
-
-			pw_i2s01_clk_pmx1: pw_i2s01_clk@1 {
-				pw_i2s01_clk_1 {
-					groups = "pw_i2s01_clk_grp1";
-					function = "pw_i2s01_clk_m1";
-				};
-			};
-
-			pw_pwm0_pmx: pw_pwm0@0 {
-				pw_pwm0 {
-					groups = "pw_pwm0_grp";
-					function = "pw_pwm0";
-				};
-			};
-
-			pw_pwm1_pmx: pw_pwm1@0 {
-				pw_pwm1 {
-					groups = "pw_pwm1_grp";
-					function = "pw_pwm1";
-				};
-			};
-
-			pw_pwm2_pmx0: pw_pwm2@0 {
-				pw_pwm2_0 {
-					groups = "pw_pwm2_grp0";
-					function = "pw_pwm2_m0";
-				};
-			};
-
-			pw_pwm2_pmx1: pw_pwm2@1 {
-				pw_pwm2_1 {
-					groups = "pw_pwm2_grp1";
-					function = "pw_pwm2_m1";
-				};
-			};
-
-			pw_pwm3_pmx0: pw_pwm3@0 {
-				pw_pwm3_0 {
-					groups = "pw_pwm3_grp0";
-					function = "pw_pwm3_m0";
-				};
-			};
-
-			pw_pwm3_pmx1: pw_pwm3@1 {
-				pw_pwm3_1 {
-					groups = "pw_pwm3_grp1";
-					function = "pw_pwm3_m1";
-				};
-			};
-
-			pw_pwm_cpu_vol_pmx0: pw_pwm_cpu_vol@0 {
-				pw_pwm_cpu_vol_0 {
-					groups = "pw_pwm_cpu_vol_grp0";
-					function = "pw_pwm_cpu_vol_m0";
-				};
-			};
-
-			pw_pwm_cpu_vol_pmx1: pw_pwm_cpu_vol@1 {
-				pw_pwm_cpu_vol_1 {
-					groups = "pw_pwm_cpu_vol_grp1";
-					function = "pw_pwm_cpu_vol_m1";
-				};
-			};
-
-			pw_backlight_pmx0: pw_backlight@0 {
-				pw_backlight_0 {
-					groups = "pw_backlight_grp0";
-					function = "pw_backlight_m0";
-				};
-			};
-
-			pw_backlight_pmx1: pw_backlight@1 {
-				pw_backlight_1 {
-					groups = "pw_backlight_grp1";
-					function = "pw_backlight_m1";
-				};
-			};
-
-			rg_eth_mac_pmx: rg_eth_mac@0 {
-				rg_eth_mac {
-					groups = "rg_eth_mac_grp";
-					function = "rg_eth_mac";
-				};
-			};
-
-			rg_gmac_phy_intr_n_pmx: rg_gmac_phy_intr_n@0 {
-				rg_gmac_phy_intr_n {
-					groups = "rg_gmac_phy_intr_n_grp";
-					function = "rg_gmac_phy_intr_n";
-				};
-			};
-
-			rg_rgmii_mac_pmx: rg_rgmii_mac@0 {
-				rg_rgmii_mac {
-					groups = "rg_rgmii_mac_grp";
-					function = "rg_rgmii_mac";
-				};
-			};
-
-			rg_rgmii_phy_ref_clk_pmx0: rg_rgmii_phy_ref_clk@0 {
-				rg_rgmii_phy_ref_clk_0 {
-					groups =
-						"rg_rgmii_phy_ref_clk_grp0";
-					function =
-						"rg_rgmii_phy_ref_clk_m0";
-				};
-			};
-
-			rg_rgmii_phy_ref_clk_pmx1: rg_rgmii_phy_ref_clk@1 {
-				rg_rgmii_phy_ref_clk_1 {
-					groups =
-						"rg_rgmii_phy_ref_clk_grp1";
-					function =
-						"rg_rgmii_phy_ref_clk_m1";
-				};
-			};
-
-			sd0_pmx: sd0@0 {
-				sd0 {
-					groups = "sd0_grp";
-					function = "sd0";
-				};
-			};
-
-			sd0_4bit_pmx: sd0_4bit@0 {
-				sd0_4bit {
-					groups = "sd0_4bit_grp";
-					function = "sd0_4bit";
-				};
-			};
-
-			sd1_pmx: sd1@0 {
-				sd1 {
-					groups = "sd1_grp";
-					function = "sd1";
-				};
-			};
-
-			sd1_4bit_pmx0: sd1_4bit@0 {
-				sd1_4bit_0 {
-					groups = "sd1_4bit_grp0";
-					function = "sd1_4bit_m0";
-				};
-			};
-
-			sd1_4bit_pmx1: sd1_4bit@1 {
-				sd1_4bit_1 {
-					groups = "sd1_4bit_grp1";
-					function = "sd1_4bit_m1";
-				};
-			};
-
-			sd2_pmx0: sd2@0 {
-				sd2_0 {
-					groups = "sd2_grp0";
-					function = "sd2_m0";
-				};
-			};
-
-			sd2_no_cdb_pmx0: sd2_no_cdb@0 {
-				sd2_no_cdb_0 {
-					groups = "sd2_no_cdb_grp0";
-					function = "sd2_no_cdb_m0";
-				};
-			};
-
-			sd3_pmx: sd3@0 {
-				sd3 {
-					groups = "sd3_grp";
-					function = "sd3";
-				};
-			};
-
-			sd5_pmx: sd5@0 {
-				sd5 {
-					groups = "sd5_grp";
-					function = "sd5";
-				};
-			};
-
-			sd6_pmx0: sd6@0 {
-				sd6_0 {
-					groups = "sd6_grp0";
-					function = "sd6_m0";
-				};
-			};
-
-			sd6_pmx1: sd6@1 {
-				sd6_1 {
-					groups = "sd6_grp1";
-					function = "sd6_m1";
-				};
-			};
-
-			sp0_ext_ldo_on_pmx: sp0_ext_ldo_on@0 {
-				sp0_ext_ldo_on {
-					groups = "sp0_ext_ldo_on_grp";
-					function = "sp0_ext_ldo_on";
-				};
-			};
-
-			sp0_qspi_pmx: sp0_qspi@0 {
-				sp0_qspi {
-					groups = "sp0_qspi_grp";
-					function = "sp0_qspi";
-				};
-			};
-
-			sp1_spi_pmx: sp1_spi@0 {
-				sp1_spi {
-					groups = "sp1_spi_grp";
-					function = "sp1_spi";
-				};
-			};
-
-			tpiu_trace_pmx: tpiu_trace@0 {
-				tpiu_trace {
-					groups = "tpiu_trace_grp";
-					function = "tpiu_trace";
-				};
-			};
-
-			uart0_pmx: uart0@0 {
-				uart0 {
-					groups = "uart0_grp";
-					function = "uart0";
-				};
-			};
-
-			uart0_nopause_pmx: uart0_nopause@0 {
-				uart0_nopause {
-					groups = "uart0_nopause_grp";
-					function = "uart0_nopause";
-				};
-			};
-
-			uart1_pmx: uart1@0 {
-				uart1 {
-					groups = "uart1_grp";
-					function = "uart1";
-				};
-			};
-
-			uart2_pmx: uart2@0 {
-				uart2 {
-					groups = "uart2_grp";
-					function = "uart2";
-				};
-			};
-
-			uart3_pmx0: uart3@0 {
-				uart3_0 {
-					groups = "uart3_grp0";
-					function = "uart3_m0";
-				};
-			};
-
-			uart3_pmx1: uart3@1 {
-				uart3_1 {
-					groups = "uart3_grp1";
-					function = "uart3_m1";
-				};
-			};
-
-			uart3_pmx2: uart3@2 {
-				uart3_2 {
-					groups = "uart3_grp2";
-					function = "uart3_m2";
-				};
-			};
-
-			uart3_pmx3: uart3@3 {
-				uart3_3 {
-					groups = "uart3_grp3";
-					function = "uart3_m3";
-				};
-			};
-
-			uart3_nopause_pmx0: uart3_nopause@0 {
-				uart3_nopause_0 {
-					groups = "uart3_nopause_grp0";
-					function = "uart3_nopause_m0";
-				};
-			};
-
-			uart3_nopause_pmx1: uart3_nopause@1 {
-				uart3_nopause_1 {
-					groups = "uart3_nopause_grp1";
-					function = "uart3_nopause_m1";
-				};
-			};
-
-			uart4_pmx0: uart4@0 {
-				uart4_0 {
-					groups = "uart4_grp0";
-					function = "uart4_m0";
-				};
-			};
-
-			uart4_pmx1: uart4@1 {
-				uart4_1 {
-					groups = "uart4_grp1";
-					function = "uart4_m1";
-				};
-			};
-
-			uart4_pmx2: uart4@2 {
-				uart4_2 {
-					groups = "uart4_grp2";
-					function = "uart4_m2";
-				};
-			};
-
-			uart4_nopause_pmx: uart4_nopause@0 {
-				uart4_nopause {
-					groups = "uart4_nopause_grp";
-					function = "uart4_nopause";
-				};
-			};
-
-			usb0_drvvbus_pmx: usb0_drvvbus@0 {
-				usb0_drvvbus {
-					groups = "usb0_drvvbus_grp";
-					function = "usb0_drvvbus";
-				};
-			};
-
-			usb1_drvvbus_pmx: usb1_drvvbus@0 {
-				usb1_drvvbus {
-					groups = "usb1_drvvbus_grp";
-					function = "usb1_drvvbus";
-				};
-			};
-
-			visbus_dout_pmx: visbus_dout@0 {
-				visbus_dout {
-					groups = "visbus_dout_grp";
-					function = "visbus_dout";
-				};
-			};
-
-			vi_vip1_pmx: vi_vip1@0 {
-				vi_vip1 {
-					groups = "vi_vip1_grp";
-					function = "vi_vip1";
-				};
-			};
-
-			vi_vip1_ext_pmx: vi_vip1_ext@0 {
-				vi_vip1_ext {
-					groups = "vi_vip1_ext_grp";
-					function = "vi_vip1_ext";
-				};
-			};
-
-			vi_vip1_low8bit_pmx: vi_vip1_low8bit@0 {
-				vi_vip1_low8bit {
-					groups = "vi_vip1_low8bit_grp";
-					function = "vi_vip1_low8bit";
-				};
-			};
-
-			vi_vip1_high8bit_pmx: vi_vip1_high8bit@0 {
-				vi_vip1_high8bit {
-					groups = "vi_vip1_high8bit_grp";
-					function = "vi_vip1_high8bit";
-				};
-			};
-		};
-
-		pmipc {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13240000 0x13240000 0x00010000>;
-			pmipc@0x13240000 {
-				compatible = "sirf,atlas7-pmipc";
-				reg = <0x13240000 0x00010000>;
-			};
-		};
-
-		dramfw {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10830000 0x10830000 0x18000>;
-			dramfw@10820000 {
-				compatible = "sirf,nocfw-dramfw";
-				reg = <0x10830000 0x18000>;
-			};
-		};
-
-		spramfw {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10250000 0x10250000 0x3000>;
-			spramfw@10820000 {
-				compatible = "sirf,nocfw-spramfw";
-				reg = <0x10250000 0x3000>;
-			};
-		};
-
-		cpum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10200000 0x10200000 0x3000>;
-			cpum@10200000 {
-				compatible = "sirf,nocfw-cpum";
-				reg = <0x10200000 0x3000>;
-			};
-		};
-
-		cgum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18641000 0x18641000 0x3000>,
-					 <0x18620000 0x18620000 0x1000>;
-
-			cgum@18641000 {
-				compatible = "sirf,nocfw-cgum";
-				reg = <0x18641000 0x3000>;
-			};
-
-			car: clock-controller@18620000 {
-				compatible = "sirf,atlas7-car";
-				reg = <0x18620000 0x1000>;
-				#clock-cells = <1>;
-				#reset-cells = <1>;
-			};
-		};
-
-		gnssm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18000000 0x18000000 0x0000ffff>,
-				<0x18010000 0x18010000 0x1000>,
-				<0x18020000 0x18020000 0x1000>,
-				<0x18030000 0x18030000 0x1000>,
-				<0x18040000 0x18040000 0x1000>,
-				<0x18050000 0x18050000 0x1000>,
-				<0x18060000 0x18060000 0x1000>,
-				<0x18100000 0x18100000 0x3000>,
-				<0x18250000 0x18250000 0x10000>,
-				<0x18200000 0x18200000 0x1000>;
-
-			dmac0: dma-controller@18000000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x18000000 0x1000>;
-				interrupts = <0 12 0>;
-				clocks = <&car 89>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			gnssmfw@0x18100000 {
-				compatible = "sirf,nocfw-gnssm";
-				reg = <0x18100000 0x3000>;
-			};
-
-			uart0: uart@18010000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18010000 0x1000>;
-				interrupts = <0 17 0>;
-				clocks = <&car 90>;
-				fifosize = <128>;
-				dmas = <&dmac0 3>, <&dmac0 2>;
-				dma-names = "rx", "tx";
-			};
-
-			uart1: uart@18020000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18020000 0x1000>;
-				interrupts = <0 18 0>;
-				clocks = <&car 88>;
-				fifosize = <32>;
-			};
-
-			uart2: uart@18030000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18030000 0x1000>;
-				interrupts = <0 19 0>;
-				clocks = <&car 91>;
-				fifosize = <128>;
-				dmas = <&dmac0 6>, <&dmac0 7>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart3: uart@18040000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18040000 0x1000>;
-				interrupts = <0 66 0>;
-				clocks = <&car 92>;
-				fifosize = <128>;
-				dmas = <&dmac0 4>, <&dmac0 5>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart4: uart@18050000 {
-				cell-index = <4>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18050000 0x1000>;
-				interrupts = <0 69 0>;
-				clocks = <&car 93>;
-				fifosize = <128>;
-				dmas = <&dmac0 0>, <&dmac0 1>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			uart5: uart@18060000 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-uart";
-				reg = <0x18060000 0x1000>;
-				interrupts = <0 71 0>;
-				clocks = <&car 94>;
-				fifosize = <128>;
-				dmas = <&dmac0 8>, <&dmac0 9>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-			dspub@18250000 {
-				compatible = "dx,cc44p";
-				reg = <0x18250000 0x10000>;
-				interrupts = <0 27 0>;
-			};
-
-			spi1: spi@18200000 {
-				compatible = "sirf,prima2-spi";
-				reg = <0x18200000 0x1000>;
-				interrupts = <0 16 0>;
-				clocks = <&car 95>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				dmas = <&dmac0 12>, <&dmac0 13>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-		};
-
-
-		gpum {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13000000 0x13000000 0x3000>;
-			gpum@0x13000000 {
-				compatible = "sirf,nocfw-gpum";
-				reg = <0x13000000 0x3000>;
-			};
-		};
-
-		mediam {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x16000000 0x16000000 0x00200000>,
-				<0x17020000 0x17020000 0x1000>,
-				<0x17030000 0x17030000 0x1000>,
-				<0x17040000 0x17040000 0x1000>,
-				<0x17050000 0x17050000 0x10000>,
-				<0x17060000 0x17060000 0x200>,
-				<0x17060200 0x17060200 0x100>,
-				<0x17070000 0x17070000 0x200>,
-				<0x17070200 0x17070200 0x100>,
-				<0x170A0000 0x170A0000 0x3000>;
-
-			mediam@170A0000 {
-				compatible = "sirf,nocfw-mediam";
-				reg = <0x170A0000 0x3000>;
-			};
-
-			gpio_0: gpio_mediam@17040000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x17040000 0x1000>;
-				interrupts = <0 13 0>, <0 14 0>;
-				clocks = <&car 107>;
-				clock-names = "gpio0_io";
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <2>;
-				gpio-ranges = <&pinctrl 0 0 0>,
-						<&pinctrl 32 0 0>;
-				gpio-ranges-group-names = "lvds_gpio_grp",
-							"uart_nand_gpio_grp";
-			};
-
-			nand@17050000 {
-				compatible = "sirf,atlas7-nand";
-				reg = <0x17050000 0x10000>;
-				interrupts = <0 41 0>;
-				clocks = <&car 108>, <&car 112>;
-				clock-names = "nand_io", "nand_nand";
-			};
-
-			sd0: sdhci@16000000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x16000000 0x100000>;
-				interrupts = <0 38 0>;
-				clocks = <&car 109>, <&car 111>;
-				clock-names = "core", "iface";
-				wp-inverted;
-				non-removable;
-				status = "disabled";
-				bus-width = <8>;
-			};
-
-			sd1: sdhci@16100000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x16100000 0x100000>;
-				interrupts = <0 38 0>;
-				clocks = <&car 109>, <&car 111>;
-				clock-names = "core", "iface";
-				non-removable;
-				status = "disabled";
-				bus-width = <8>;
-			};
-
-			usb0: usb@17060000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-usb";
-				reg = <0x17060000 0x200>;
-				interrupts = <0 10 0>;
-				clocks = <&car 113>;
-				sirf,usbphy = <&usbphy0>;
-				phy_type = "utmi";
-				dr_mode = "otg";
-				maximum-speed = "high-speed";
-				status = "okay";
-			};
-
-			usb1: usb@17070000 {
-				cell-index = <1>;
-				compatible = "sirf,atlas7-usb";
-				reg = <0x17070000 0x200>;
-				interrupts = <0 11 0>;
-				clocks = <&car 114>;
-				sirf,usbphy = <&usbphy1>;
-				phy_type = "utmi";
-				dr_mode = "host";
-				maximum-speed = "high-speed";
-				status = "okay";
-			};
-
-			usbphy0: usbphy@0 {
-				compatible = "sirf,atlas7-usbphy";
-				reg = <0x17060200 0x100>;
-				clocks = <&car 115>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@1 {
-				compatible = "sirf,atlas7-usbphy";
-				reg = <0x17070200 0x100>;
-				clocks = <&car 116>;
-				status = "okay";
-			};
-
-			i2c0: i2c@17020000 {
-				cell-index = <0>;
-				compatible = "sirf,prima2-i2c";
-				reg = <0x17020000 0x1000>;
-				interrupts = <0 24 0>;
-				clocks = <&car 105>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-		};
-
-		vdifm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13290000 0x13290000 0x3000>,
-				<0x13300000 0x13300000 0x1000>,
-				<0x14200000 0x14200000 0x600000>;
-
-			vdifm@13290000 {
-				compatible = "sirf,nocfw-vdifm";
-				reg = <0x13290000 0x3000>;
-			};
-
-			gpio_1: gpio_vdifm@13300000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x13300000 0x1000>;
-				interrupts = <0 43 0>, <0 44 0>,
-						<0 45 0>, <0 46 0>;
-				clocks = <&car 84>;
-				clock-names = "gpio1_io";
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <4>;
-				gpio-ranges = <&pinctrl 0 0 0>,
-						<&pinctrl 32 0 0>,
-						<&pinctrl 64 0 0>,
-						<&pinctrl 96 0 0>;
-				gpio-ranges-group-names = "gnss_gpio_grp",
-							"lcd_vip_gpio_grp",
-							"sdio_i2s_gpio_grp",
-							"sp_rgmii_gpio_grp";
-			};
-
-			sd2: sdhci@14200000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14200000 0x100000>;
-				interrupts = <0 23 0>;
-				clocks = <&car 70>, <&car 75>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-				sd-uhs-sdr50;
-				vqmmc-supply = <&vqmmc>;
-				vqmmc: vqmmc@2 {
-					regulator-min-microvolt = <1650000>;
-					regulator-max-microvolt = <1950000>;
-					regulator-name = "vqmmc-ldo";
-					regulator-type = "voltage";
-					regulator-boot-on;
-					regulator-allow-bypass;
-				};
-			};
-
-			sd3: sdhci@14300000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14300000 0x100000>;
-				interrupts = <0 23 0>;
-				clocks = <&car 76>, <&car 81>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-
-			sd5: sdhci@14500000 {
-				cell-index = <5>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14500000 0x100000>;
-				interrupts = <0 39 0>;
-				clocks = <&car 71>, <&car 76>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-				loop-dma;
-			};
-
-			sd6: sdhci@14600000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14600000 0x100000>;
-				interrupts = <0 98 0>;
-				clocks = <&car 72>, <&car 77>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-
-			sd7: sdhci@14700000 {
-				cell-index = <7>;
-				compatible = "sirf,atlas7-sdhc";
-				reg = <0x14700000 0x100000>;
-				interrupts = <0 98 0>;
-				clocks = <&car 72>, <&car 77>;
-				clock-names = "core", "iface";
-				status = "disabled";
-				bus-width = <4>;
-			};
-		};
-
-		audiom {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10d50000 0x10d50000 0x0000ffff>,
-					<0x10d60000 0x10d60000 0x0000ffff>,
-					<0x10d80000 0x10d80000 0x0000ffff>,
-					<0x10d90000 0x10d90000 0x0000ffff>,
-					<0x10ED0000 0x10ED0000 0x3000>,
-					<0x10dc8000 0x10dc8000 0x1000>,
-					<0x10dc0000 0x10dc0000 0x1000>,
-					<0x10db0000 0x10db0000 0x4000>,
-					<0x10d40000 0x10d40000 0x1000>,
-					<0x10d30000 0x10d30000 0x1000>;
-
-			timer@10dc0000 {
-				compatible = "sirf,atlas7-tick";
-				reg = <0x10dc0000 0x1000>;
-				interrupts = <0 0 0>,
-					   <0 1 0>,
-					   <0 2 0>,
-					   <0 49 0>,
-					   <0 50 0>,
-					   <0 51 0>;
-				clocks = <&car 47>;
-			};
-
-			timerb@10dc8000 {
-					compatible = "sirf,atlas7-tick";
-					reg = <0x10dc8000 0x1000>;
-					interrupts = <0 74 0>,
-							   <0 75 0>,
-							   <0 76 0>,
-							   <0 77 0>,
-							   <0 78 0>,
-							   <0 79 0>;
-					clocks = <&car 47>;
-			};
-
-			vip0@10db0000 {
-				compatible = "sirf,atlas7-vip0";
-				reg = <0x10db0000 0x2000>;
-				interrupts = <0 85 0>;
-				sirf,vip_cma_size = <0xC00000>;
-			};
-
-			cvd@10db2000 {
-				compatible = "sirf,cvd";
-				reg = <0x10db2000 0x2000>;
-				clocks = <&car 46>;
-			};
-
-			dmac2: dma-controller@10d50000 {
-				cell-index = <2>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x10d50000 0xffff>;
-				interrupts = <0 55 0>;
-				clocks = <&car 60>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			dmac3: dma-controller@10d60000 {
-				cell-index = <3>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x10d60000 0xffff>;
-				interrupts = <0 56 0>;
-				clocks = <&car 61>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-
-			adc: adc@10d80000 {
-				compatible = "sirf,atlas7-adc";
-				reg = <0x10d80000 0xffff>;
-				interrupts = <0 34 0>;
-				clocks = <&car 49>;
-				#io-channel-cells = <1>;
-			};
-
-			pulsec@10d90000 {
-				compatible = "sirf,prima2-pulsec";
-				reg = <0x10d90000 0xffff>;
-				interrupts = <0 42 0>;
-				clocks = <&car 54>;
-			};
-
-			audiom@10ED0000 {
-				compatible = "sirf,nocfw-audiom";
-				reg = <0x10ED0000 0x3000>;
-				interrupts = <0 102 0>;
-			};
-
-			usp1: usp@10d30000 {
-				cell-index = <1>;
-				reg = <0x10d30000 0x1000>;
-				fifosize = <512>;
-				clocks = <&car 58>;
-				dmas = <&dmac2 6>, <&dmac2 7>;
-				dma-names = "rx", "tx";
-			};
-
-			usp2: usp@10d40000 {
-				cell-index = <2>;
-				reg = <0x10d40000 0x1000>;
-				interrupts = <0 22 0>;
-				clocks = <&car 59>;
-				dmas = <&dmac2 12>, <&dmac2 13>;
-				dma-names = "rx", "tx";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				status = "disabled";
-			};
-		};
-
-		ddrm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x10820000 0x10820000 0x3000>,
-					<0x10800000 0x10800000 0x2000>;
-			ddrm@10820000 {
-				compatible = "sirf,nocfw-ddrm";
-				reg = <0x10820000 0x3000>;
-				interrupts = <0 105 0>;
-			};
-
-			memory-controller@0x10800000 {
-				compatible = "sirf,atlas7-memc";
-				reg = <0x10800000 0x2000>;
-			};
-
-		};
-
-		btm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x11002000 0x11002000 0x0000ffff>,
-			       <0x11010000 0x11010000 0x3000>,
-			       <0x11000000 0x11000000 0x1000>,
-			       <0x11001000 0x11001000 0x1000>;
-
-			dmac4: dma-controller@11002000 {
-				cell-index = <4>;
-				compatible = "sirf,atlas7-dmac";
-				reg = <0x11002000 0x1000>;
-				interrupts = <0 99 0>;
-				clocks = <&car 130>;
-				dma-channels = <16>;
-				#dma-cells = <1>;
-			};
-			uart6: uart@11000000 {
-				cell-index = <6>;
-				compatible = "sirf,atlas7-bt-uart",
-						"sirf,atlas7-uart";
-				reg = <0x11000000 0x1000>;
-				interrupts = <0 100 0>;
-				clocks = <&car 131>, <&car 133>, <&car 134>;
-				clock-names = "uart", "general", "noc";
-				fifosize = <128>;
-				dmas = <&dmac4 12>, <&dmac4 13>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			usp3: usp@11001000 {
-				compatible = "sirf,atlas7-bt-usp",
-					   "sirf,prima2-usp-pcm";
-				cell-index = <3>;
-				reg = <0x11001000 0x1000>;
-				fifosize = <512>;
-				clocks = <&car 132>, <&car 129>, <&car 133>,
-					<&car 134>, <&car 135>;
-				clock-names = "usp3_io", "a7ca_btss", "a7ca_io",
-					"noc_btm_io", "thbtm_io";
-				dmas = <&dmac4 0>, <&dmac4 1>;
-				dma-names = "rx", "tx";
-			};
-
-			btm@11010000 {
-				compatible = "sirf,nocfw-btm";
-				reg = <0x11010000 0x3000>;
-			};
-		};
-
-		rtcm {
-			compatible = "arteris, flexnoc", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x18810000 0x18810000 0x3000>,
-				<0x18840000 0x18840000 0x1000>,
-				<0x18890000 0x18890000 0x1000>,
-				<0x188B0000 0x188B0000 0x10000>,
-				<0x188D0000 0x188D0000 0x1000>;
-			rtcm@18810000 {
-				compatible = "sirf,nocfw-rtcm";
-				reg = <0x18810000 0x3000>;
-				interrupts = <0 109 0>;
-			};
-
-			gpio_2: gpio_rtcm@18890000 {
-				#gpio-cells = <2>;
-				#interrupt-cells = <2>;
-				compatible = "sirf,atlas7-gpio";
-				reg = <0x18890000 0x1000>;
-				interrupts = <0 47 0>;
-				gpio-controller;
-				interrupt-controller;
-
-				gpio-banks = <1>;
-				gpio-ranges = <&pinctrl 0 0 0>;
-				gpio-ranges-group-names = "rtc_gpio_grp";
-			};
-
-			rtc-iobg@18840000 {
-				compatible = "sirf,prima2-rtciobg",
-					"sirf-prima2-rtciobg-bus",
-					"simple-bus";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = <0x18840000 0x1000>;
-
-				sysrtc@2000 {
-					compatible = "sirf,prima2-sysrtc";
-					reg = <0x2000 0x100>;
-					interrupts = <0 52 0>;
-				};
-				pwrc@3000 {
-					compatible = "sirf,atlas7-pwrc";
-					reg = <0x3000 0x100>;
-				};
-			};
-
-			qspi: flash@188B0000 {
-				cell-index = <0>;
-				compatible = "sirf,atlas7-qspi-nor";
-				reg = <0x188B0000 0x10000>;
-				interrupts = <0 15 0>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			retain@0x188D0000 {
-				compatible = "sirf,atlas7-retain";
-				reg = <0x188D0000 0x1000>;
-			};
-
-		};
-		disp-iobg {
-			/* lcdc0 */
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x13100000 0x13100000 0x20000>,
-				 <0x10e10000 0x10e10000 0x10000>;
-
-			lcd@13100000 {
-				compatible = "sirf,atlas7-lcdc";
-				reg = <0x13100000 0x10000>;
-				interrupts = <0 30 0>;
-				clocks = <&car 79>;
-			};
-			vpp@13110000 {
-				compatible = "sirf,atlas7-vpp";
-				reg = <0x13110000 0x10000>;
-				interrupts = <0 31 0>;
-				clocks = <&car 78>;
-				resets = <&car 29>;
-			};
-			lvds@10e10000 {
-				compatible = "sirf,atlas7-lvdsc";
-				reg = <0x10e10000 0x10000>;
-				interrupts = <0 64 0>;
-				clocks = <&car 54>;
-				resets = <&car 29>;
-			};
-
-		};
-
-		graphics-iobg {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x12000000 0x12000000 0x1000000>;
-
-			graphics@12000000 {
-				compatible = "powervr,sgx531";
-				reg = <0x12000000 0x1000000>;
-				interrupts = <0 6 0>;
-				clocks = <&car 126>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/axm5516-amarillo.dts b/arch/arm/boot/dts/axm5516-amarillo.dts
index a9d60471d9ff..2e2ad3c7ee77 100644
--- a/arch/arm/boot/dts/axm5516-amarillo.dts
+++ b/arch/arm/boot/dts/axm5516-amarillo.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm5516-amarillo.dts
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/axm5516-cpus.dtsi b/arch/arm/boot/dts/axm5516-cpus.dtsi
index b85f360cb125..f13ef80b6637 100644
--- a/arch/arm/boot/dts/axm5516-cpus.dtsi
+++ b/arch/arm/boot/dts/axm5516-cpus.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm5516-cpus.dtsi
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 / {
@@ -77,7 +73,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x00>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -85,7 +81,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x01>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -93,7 +89,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x02>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -101,7 +97,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x03>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -109,7 +105,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x100>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -117,7 +113,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x101>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -125,7 +121,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x102>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -133,7 +129,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x103>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -141,7 +137,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x200>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -149,7 +145,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x201>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -157,7 +153,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x202>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -165,7 +161,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x203>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -173,7 +169,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x300>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -181,7 +177,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x301>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -189,7 +185,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x302>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 
@@ -197,7 +193,7 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x303>;
-			clock-frequency= <1400000000>;
+			clock-frequency = <1400000000>;
 			cpu-release-addr = <0>; // Fixed by the boot loader
 		};
 	};
diff --git a/arch/arm/boot/dts/axm55xx.dtsi b/arch/arm/boot/dts/axm55xx.dtsi
index ea288f0a1d39..5277890cfad2 100644
--- a/arch/arm/boot/dts/axm55xx.dtsi
+++ b/arch/arm/boot/dts/axm55xx.dtsi
@@ -1,20 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm55xx.dtsi
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/lsi,axm5516-clks.h>
 
-#include "skeleton64.dtsi"
-
 / {
+	#address-cells = <2>;
+	#size-cells = <2>;
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -62,7 +58,7 @@
 		#address-cells = <0>;
 		interrupt-controller;
 		reg = <0x20 0x01001000 0 0x1000>,
-		      <0x20 0x01002000 0 0x1000>,
+		      <0x20 0x01002000 0 0x2000>,
 		      <0x20 0x01004000 0 0x2000>,
 		      <0x20 0x01006000 0 0x2000>;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
@@ -107,12 +103,12 @@
 		};
 
 		amba {
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
 
-			serial0: uart@2010080000 {
+			serial0: serial@2010080000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10080000 0 0x1000>;
 				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -121,7 +117,7 @@
 				status = "disabled";
 			};
 
-			serial1: uart@2010081000 {
+			serial1: serial@2010081000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10081000 0 0x1000>;
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -130,7 +126,7 @@
 				status = "disabled";
 			};
 
-			serial2: uart@2010082000 {
+			serial2: serial@2010082000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10082000 0 0x1000>;
 				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -139,7 +135,7 @@
 				status = "disabled";
 			};
 
-			serial3: uart@2010083000 {
+			serial3: serial@2010083000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x20 0x10083000 0 0x1000>;
 				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/axp152.dtsi b/arch/arm/boot/dts/axp152.dtsi
new file mode 100644
index 000000000000..f90ad6c64a07
--- /dev/null
+++ b/arch/arm/boot/dts/axp152.dtsi
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&axp152 {
+	compatible = "x-powers,axp152";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+};
diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi
index 24c935c72e5e..ca240cd6f6c3 100644
--- a/arch/arm/boot/dts/axp209.dtsi
+++ b/arch/arm/boot/dts/axp209.dtsi
@@ -53,6 +53,27 @@
 	interrupt-controller;
 	#interrupt-cells = <1>;
 
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp202-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp209-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp209-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp209-battery-power-supply";
+		status = "disabled";
+	};
+
 	regulators {
 		/* Default work frequency for buck regulators */
 		x-powers,dcdc-freq = <1500>;
@@ -87,6 +108,12 @@
 
 		reg_ldo5: ldo5 {
 			regulator-name = "ldo5";
+			status = "disabled";
 		};
 	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp202-usb-power-supply";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/axp223.dtsi b/arch/arm/boot/dts/axp223.dtsi
new file mode 100644
index 000000000000..b91b6c1278c7
--- /dev/null
+++ b/arch/arm/boot/dts/axp223.dtsi
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2016 Free Electrons
+ *
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP223-en.pdf
+ *
+ * The AXP223 shares most of its logic with the AXP221 but it has some
+ * differences, for the VBUS driver for example.
+ */
+
+#include "axp22x.dtsi"
+
+&usb_power_supply {
+	compatible = "x-powers,axp223-usb-power-supply";
+};
diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi
new file mode 100644
index 000000000000..f79650afd0a7
--- /dev/null
+++ b/arch/arm/boot/dts/axp22x.dtsi
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP221/221s/223 Integrated Power Management Chip
+ * http://www.x-powers.com/product/AXP22X.php
+ * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf
+ */
+
+&axp22x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp221-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp221-adc";
+		#io-channel-cells = <1>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp221-battery-power-supply";
+		status = "disabled";
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+			regulator-name = "dcdc1";
+		};
+
+		reg_dcdc2: dcdc2 {
+			regulator-name = "dcdc2";
+		};
+
+		reg_dcdc3: dcdc3 {
+			regulator-name = "dcdc3";
+		};
+
+		reg_dcdc4: dcdc4 {
+			regulator-name = "dcdc4";
+		};
+
+		reg_dcdc5: dcdc5 {
+			regulator-name = "dcdc5";
+		};
+
+		reg_dc1sw: dc1sw {
+			regulator-name = "dc1sw";
+		};
+
+		reg_dc5ldo: dc5ldo {
+			regulator-name = "dc5ldo";
+		};
+
+		reg_aldo1: aldo1 {
+			regulator-name = "aldo1";
+		};
+
+		reg_aldo2: aldo2 {
+			regulator-name = "aldo2";
+		};
+
+		reg_aldo3: aldo3 {
+			regulator-name = "aldo3";
+		};
+
+		reg_dldo1: dldo1 {
+			regulator-name = "dldo1";
+		};
+
+		reg_dldo2: dldo2 {
+			regulator-name = "dldo2";
+		};
+
+		reg_dldo3: dldo3 {
+			regulator-name = "dldo3";
+		};
+
+		reg_dldo4: dldo4 {
+			regulator-name = "dldo4";
+		};
+
+		reg_eldo1: eldo1 {
+			regulator-name = "eldo1";
+		};
+
+		reg_eldo2: eldo2 {
+			regulator-name = "eldo2";
+		};
+
+		reg_eldo3: eldo3 {
+			regulator-name = "eldo3";
+		};
+
+		reg_ldo_io0: ldo_io0 {
+			regulator-name = "ldo_io0";
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo_io1 {
+			regulator-name = "ldo_io1";
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc_ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-name = "rtc_ldo";
+		};
+
+		reg_drivevbus: drivevbus {
+			regulator-name = "drivevbus";
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp221-usb-power-supply";
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/axp809.dtsi b/arch/arm/boot/dts/axp809.dtsi
new file mode 100644
index 000000000000..d134d4c00bd8
--- /dev/null
+++ b/arch/arm/boot/dts/axp809.dtsi
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/*
+ * AXP809 Integrated Power Management Chip
+ */
+
+&axp809 {
+	compatible = "x-powers,axp809";
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp809-gpio",
+			     "x-powers,axp221-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/axp81x.dtsi b/arch/arm/boot/dts/axp81x.dtsi
new file mode 100644
index 000000000000..ebaf1c3ce8db
--- /dev/null
+++ b/arch/arm/boot/dts/axp81x.dtsi
@@ -0,0 +1,164 @@
+/*
+ * Copyright 2017 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/* AXP813/818 Integrated Power Management Chip */
+
+&axp81x {
+	interrupt-controller;
+	#interrupt-cells = <1>;
+
+	ac_power_supply: ac-power {
+		compatible = "x-powers,axp813-ac-power-supply";
+		status = "disabled";
+	};
+
+	axp_adc: adc {
+		compatible = "x-powers,axp813-adc";
+		#io-channel-cells = <1>;
+	};
+
+	axp_gpio: gpio {
+		compatible = "x-powers,axp813-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	battery_power_supply: battery-power {
+		compatible = "x-powers,axp813-battery-power-supply";
+		status = "disabled";
+	};
+
+	regulators {
+		/* Default work frequency for buck regulators */
+		x-powers,dcdc-freq = <3000>;
+
+		reg_dcdc1: dcdc1 {
+		};
+
+		reg_dcdc2: dcdc2 {
+		};
+
+		reg_dcdc3: dcdc3 {
+		};
+
+		reg_dcdc4: dcdc4 {
+		};
+
+		reg_dcdc5: dcdc5 {
+		};
+
+		reg_dcdc6: dcdc6 {
+		};
+
+		reg_dcdc7: dcdc7 {
+		};
+
+		reg_aldo1: aldo1 {
+		};
+
+		reg_aldo2: aldo2 {
+		};
+
+		reg_aldo3: aldo3 {
+		};
+
+		reg_dldo1: dldo1 {
+		};
+
+		reg_dldo2: dldo2 {
+		};
+
+		reg_dldo3: dldo3 {
+		};
+
+		reg_dldo4: dldo4 {
+		};
+
+		reg_eldo1: eldo1 {
+		};
+
+		reg_eldo2: eldo2 {
+		};
+
+		reg_eldo3: eldo3 {
+		};
+
+		reg_fldo1: fldo1 {
+		};
+
+		reg_fldo2: fldo2 {
+		};
+
+		reg_fldo3: fldo3 {
+		};
+
+		reg_ldo_io0: ldo-io0 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_ldo_io1: ldo-io1 {
+			/* Disable by default to avoid conflicts with GPIO */
+			status = "disabled";
+		};
+
+		reg_rtc_ldo: rtc-ldo {
+			/* RTC_LDO is a fixed, always-on regulator */
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		reg_sw: sw {
+		};
+
+		reg_drivevbus: drivevbus {
+			status = "disabled";
+		};
+	};
+
+	usb_power_supply: usb-power {
+		compatible = "x-powers,axp813-usb-power-supply";
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 60d8389fdb6c..52f91a12a99a 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -36,56 +36,98 @@ clocks {
 	ranges;
 
 	osc: oscillator {
+		#clock-cells = <0>;
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
 		clock-frequency = <25000000>;
 	};
 
-	apb_clk: apb_clk {
-		compatible = "fixed-clock";
+	/* Cygnus ARM PLL */
+	armpll: armpll@19000000 {
 		#clock-cells = <0>;
-		clock-frequency = <1000000000>;
+		compatible = "brcm,cygnus-armpll";
+		clocks = <&osc>;
+		reg = <0x19000000 0x1000>;
 	};
 
-	periph_clk: periph_clk {
-		compatible = "fixed-clock";
+	/* peripheral clock for system timer */
+	periph_clk: arm_periph_clk {
 		#clock-cells = <0>;
-		clock-frequency = <500000000>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};
 
-	sdio_clk: lcpll_ch2 {
-		compatible = "fixed-clock";
+	/* APB bus clock */
+	apb_clk: apb_clk {
 		#clock-cells = <0>;
-		clock-frequency = <200000000>;
+		compatible = "fixed-factor-clock";
+		clocks = <&armpll>;
+		clock-div = <4>;
+		clock-mult = <1>;
 	};
 
-	axi81_clk: axi81_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+	genpll: genpll@301d000 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-genpll";
+		reg = <0x0301d000 0x2c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys",
+				     "enet_sw", "audio_125", "can";
 	};
 
-	keypad_clk: keypad_clk {
-		compatible = "fixed-clock";
+	/* always 1/2 of the axi21 clock */
+	axi41_clk: axi41_clk {
 		#clock-cells = <0>;
-		clock-frequency = <31806>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <2>;
+		clock-mult = <1>;
 	};
 
-	adc_clk: adc_clk {
-		compatible = "fixed-clock";
+	/* always 1/4 of the axi21 clock */
+	axi81_clk: axi81_clk {
 		#clock-cells = <0>;
-		clock-frequency = <1562500>;
+		compatible = "fixed-factor-clock";
+		clocks = <&genpll 1>;
+		clock-div = <4>;
+		clock-mult = <1>;
 	};
 
-	pwm_clk: pwm_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <1000000>;
+	lcpll0: lcpll0@301d02c {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-lcpll0";
+		reg = <0x0301d02c 0x1c>, <0x0301c020 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "lcpll0", "pcie_phy", "ddr_phy", "sdio",
+				     "usb_phy", "smart_card", "ch5";
 	};
 
-	lcd_clk: mipipll_ch1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <100000000>;
+	mipipll: mipipll@180a9800 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-mipipll";
+		reg = <0x180a9800 0x2c>, <0x0301c020 0x4>, <0x180aa024 0x4>;
+		clocks = <&osc>;
+		clock-output-names = "mipipll", "ch0_unused", "ch1_lcd",
+				     "ch2_v3d", "ch3_unused", "ch4_unused",
+				     "ch5_unused";
+	};
+
+	asiu_clks: asiu_clks@301d048 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-asiu-clk";
+		reg = <0x0301d048 0xc>, <0x180aa024 0x4>;
+
+		clocks = <&osc>;
+		clock-output-names = "keypad", "adc/touch", "pwm";
+	};
+
+	audiopll: audiopll@180aeb00 {
+		#clock-cells = <1>;
+		compatible = "brcm,cygnus-audiopll";
+		reg = <0x180aeb00 0x68>;
+		clocks = <&osc>;
+		clock-output-names = "audiopll", "ch0_audio",
+					"ch1_audio", "ch2_audio";
 	};
 };
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index e1ac07a16f92..f9f79ed82518 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -32,14 +32,24 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
-
-#include "skeleton.dtsi"
+#include <dt-bindings/clock/bcm-cygnus.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "brcm,cygnus";
 	model = "Broadcom Cygnus SoC";
 	interrupt-parent = <&gic>;
 
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -54,197 +64,560 @@
 
 	/include/ "bcm-cygnus-clock.dtsi"
 
-	pinctrl: pinctrl@0x0301d0c8 {
-		compatible = "brcm,cygnus-pinmux";
-		reg = <0x0301d0c8 0x30>,
-		      <0x0301d24c 0x2c>;
-	};
-
-	gpio_crmu: gpio@03024800 {
-		compatible = "brcm,cygnus-crmu-gpio";
-		reg = <0x03024800 0x50>,
-		      <0x03024008 0x18>;
-		#gpio-cells = <2>;
-		gpio-controller;
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
-	gpio_ccm: gpio@1800a000 {
-		compatible = "brcm,cygnus-ccm-gpio";
-		reg = <0x1800a000 0x50>,
-		      <0x0301d164 0x20>;
-		#gpio-cells = <2>;
-		gpio-controller;
-		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-	};
+	core@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x1000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-	gpio_asiu: gpio@180a5000 {
-		compatible = "brcm,cygnus-asiu-gpio";
-		reg = <0x180a5000 0x668>;
-		#gpio-cells = <2>;
-		gpio-controller;
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
 
-		pinmux = <&pinctrl>;
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
 
-		interrupt-controller;
-		interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
 	};
 
-	amba {
+	axi {
+		compatible = "simple-bus";
+		ranges;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus", "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
 
-		wdt@18009000 {
-			 compatible = "arm,sp805" , "arm,primecell";
-			 reg = <0x18009000 0x1000>;
-			 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			 clocks = <&axi81_clk>;
-			 clock-names = "apb_pclk";
+		otp: otp@301c800 {
+			compatible = "brcm,ocotp";
+			reg = <0x0301c800 0x2c>;
+			brcm,ocotp-size = <2048>;
+			status = "disabled";
 		};
-	};
 
-	i2c0: i2c@18008000 {
-		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-		reg = <0x18008000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
+		pcie_phy: pcie_phy@301d0a0 {
+			compatible = "brcm,cygnus-pcie-phy";
+			reg = <0x0301d0a0 0x14>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pcie0_phy: pcie-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+
+			pcie1_phy: pcie-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+			};
+		};
 
-	i2c1: i2c@1800b000 {
-		compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
-		reg = <0x1800b000 0x100>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
-		clock-frequency = <100000>;
-		status = "disabled";
-	};
+		pinctrl: pinctrl@301d0c8 {
+			compatible = "brcm,cygnus-pinmux";
+			reg = <0x0301d0c8 0x30>,
+			      <0x0301d24c 0x2c>;
+
+			spi_0: spi_0 {
+				function = "spi0";
+				groups = "spi0_grp";
+			};
+
+			spi_1: spi_1 {
+				function = "spi1";
+				groups = "spi1_grp";
+			};
+
+			spi_2: spi_2 {
+				function = "spi2";
+				groups = "spi2_grp";
+			};
+		};
+
+		mailbox: mailbox@3024024 {
+			compatible = "brcm,iproc-mailbox";
+			reg = <0x03024024 0x40>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			#mbox-cells = <1>;
+		};
 
-	pcie0: pcie@18012000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18012000 0x1000>;
+		gpio_crmu: gpio@3024800 {
+			compatible = "brcm,cygnus-crmu-gpio";
+			reg = <0x03024800 0x50>,
+			      <0x03024008 0x18>;
+			ngpios = <6>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&mailbox>;
+			interrupts = <0>;
+		};
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
+		mdio: mdio@18002000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x18002000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+			status = "disabled";
 
-		linux,pci-domain = <0>;
+			gphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
 
-		bus-range = <0x00 0xff>;
+			gphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
 
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x28000000 0 0x00010000
-			  0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
+		switch: switch@18007000 {
+			compatible = "brcm,bcm11360-srab", "brcm,cygnus-srab";
+			reg = <0x18007000 0x1000>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					phy-handle = <&gphy0>;
+					phy-mode = "rgmii";
+				};
+
+				port@1 {
+					reg = <1>;
+					phy-handle = <&gphy1>;
+					phy-mode = "rgmii";
+				};
+
+				port@8 {
+					reg = <8>;
+					label = "cpu";
+					ethernet = <&eth0>;
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
 
-		status = "disabled";
-	};
+		i2c0: i2c@18008000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x18008000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 
-	pcie1: pcie@18013000 {
-		compatible = "brcm,iproc-pcie";
-		reg = <0x18013000 0x1000>;
+		wdt0: wdt@18009000 {
+			compatible = "arm,sp805" , "arm,primecell";
+			reg = <0x18009000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
 
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
+		gpio_ccm: gpio@1800a000 {
+			compatible = "brcm,cygnus-ccm-gpio";
+			reg = <0x1800a000 0x50>,
+			      <0x0301d164 0x20>;
+			ngpios = <24>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+		};
 
-		linux,pci-domain = <1>;
+		i2c1: i2c@1800b000 {
+			compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c";
+			reg = <0x1800b000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			status = "disabled";
+		};
 
-		bus-range = <0x00 0xff>;
+		pcie0: pcie@18012000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18012000 0x1000>;
 
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x81000000 0 0	  0x48000000 0 0x00010000
-			  0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 
-		status = "disabled";
-	};
+			linux,pci-domain = <0>;
 
-	uart0: serial@18020000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18020000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			bus-range = <0x00 0xff>;
 
-	uart1: serial@18021000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18021000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x28000000 0 0x00010000>,
+				 <0x82000000 0 0x20000000 0x20000000 0 0x04000000>;
 
-	uart2: serial@18022000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18020000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			phys = <&pcie0_phy>;
+			phy-names = "pcie-phy";
 
-	uart3: serial@18023000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x18023000 0x100>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&axi81_clk>;
-		clock-frequency = <100000000>;
-		status = "disabled";
-	};
+			status = "disabled";
 
-	nand: nand@18046000 {
-		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
-		reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>;
-		reg-names = "nand", "iproc-idm", "iproc-ext";
-		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			msi-parent = <&msi0>;
+			msi0: msi {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 
-		#address-cells = <1>;
-		#size-cells = <0>;
+		pcie1: pcie@18013000 {
+			compatible = "brcm,iproc-pcie";
+			reg = <0x18013000 0x1000>;
 
-		brcm,nand-has-wp;
-	};
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0>;
+			interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 
-	gic: interrupt-controller@19021000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		#address-cells = <0>;
-		interrupt-controller;
-		reg = <0x19021000 0x1000>,
-		      <0x19020100 0x100>;
-	};
+			linux,pci-domain = <1>;
 
-	L2: l2-cache {
-		compatible = "arm,pl310-cache";
-		reg = <0x19022000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-	};
+			bus-range = <0x00 0xff>;
 
-	timer@19020200 {
-		compatible = "arm,cortex-a9-global-timer";
-		reg = <0x19020200 0x100>;
-		interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&periph_clk>;
-	};
+			#address-cells = <3>;
+			#size-cells = <2>;
+			device_type = "pci";
+			ranges = <0x81000000 0 0	  0x48000000 0 0x00010000>,
+				 <0x82000000 0 0x40000000 0x40000000 0 0x04000000>;
+
+			phys = <&pcie1_phy>;
+			phy-names = "pcie-phy";
+
+			status = "disabled";
+
+			msi-parent = <&msi1>;
+			msi1: msi {
+				compatible = "brcm,iproc-msi";
+				msi-controller;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 
+		dma0: dma@18018000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x18018000 0x1000>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&apb_clk>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@18020000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18020000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart1: serial@18021000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18021000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart2: serial@18022000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18022000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		uart3: serial@18023000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x18023000 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&axi81_clk>;
+			clock-frequency = <100000000>;
+			status = "disabled";
+		};
+
+		spi0: spi@18028000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18028000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_0>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		spi1: spi@18029000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x18029000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_1>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		spi2: spi@1802a000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x1802a000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&spi_2>;
+			clocks = <&axi81_clk>, <&axi81_clk>;
+			clock-names = "sspclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		rng: rng@18032000 {
+			compatible = "brcm,iproc-rng200";
+			reg = <0x18032000 0x28>;
+		};
+
+		sdhci0: sdhci@18041000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18041000 0x100>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		eth0: ethernet@18042000 {
+			compatible = "brcm,amac";
+			reg = <0x18042000 0x1000>,
+			      <0x18110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		sdhci1: sdhci@18043000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x18043000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lcpll0 BCM_CYGNUS_LCPLL0_SDIO_CLK>;
+			bus-width = <4>;
+			sdhci,auto-cmd12;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@18046000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x18046000 0x600>, <0xf8105408 0x600>,
+			      <0x18046f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		ehci0: usb@18048000 {
+			compatible = "generic-ehci";
+			reg = <0x18048000 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		ohci0: usb@18048800 {
+			compatible = "generic-ohci";
+			reg = <0x18048800 0x100>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		clcd: clcd@180a0000 {
+			compatible = "arm,pl111", "arm,primecell";
+			reg = <0x180a0000 0x1000>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			clocks = <&axi41_clk>, <&apb_clk>;
+			clock-names = "clcdclk", "apb_pclk";
+			status = "disabled";
+		};
+
+		v3d: v3d@180a2000 {
+			compatible = "brcm,cygnus-v3d";
+			reg = <0x180a2000 0x1000>;
+			clocks = <&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+			clock-names = "v3d_clk";
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vc4: gpu {
+			compatible = "brcm,cygnus-vc4";
+		};
+
+		gpio_asiu: gpio@180a5000 {
+			compatible = "brcm,cygnus-asiu-gpio";
+			reg = <0x180a5000 0x668>;
+			ngpios = <146>;
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			interrupt-controller;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 42 1>,
+					<&pinctrl 1 44 3>,
+					<&pinctrl 4 48 1>,
+					<&pinctrl 5 50 3>,
+					<&pinctrl 8 126 1>,
+					<&pinctrl 9 155 1>,
+					<&pinctrl 10 152 1>,
+					<&pinctrl 11 154 1>,
+					<&pinctrl 12 153 1>,
+					<&pinctrl 13 127 3>,
+					<&pinctrl 16 140 1>,
+					<&pinctrl 17 145 7>,
+					<&pinctrl 24 130 10>,
+					<&pinctrl 34 141 4>,
+					<&pinctrl 38 54 1>,
+					<&pinctrl 39 56 3>,
+					<&pinctrl 42 60 3>,
+					<&pinctrl 45 64 3>,
+					<&pinctrl 48 68 2>,
+					<&pinctrl 50 84 6>,
+					<&pinctrl 56 94 6>,
+					<&pinctrl 62 72 1>,
+					<&pinctrl 63 70 1>,
+					<&pinctrl 64 80 1>,
+					<&pinctrl 65 74 3>,
+					<&pinctrl 68 78 1>,
+					<&pinctrl 69 82 1>,
+					<&pinctrl 70 156 17>,
+					<&pinctrl 87 104 12>,
+					<&pinctrl 99 102 2>,
+					<&pinctrl 101 90 4>,
+					<&pinctrl 105 116 6>,
+					<&pinctrl 111 100 2>,
+					<&pinctrl 113 122 4>,
+					<&pinctrl 123 11 1>,
+					<&pinctrl 124 38 4>,
+					<&pinctrl 128 43 1>,
+					<&pinctrl 129 47 1>,
+					<&pinctrl 130 49 1>,
+					<&pinctrl 131 53 1>,
+					<&pinctrl 132 55 1>,
+					<&pinctrl 133 59 1>,
+					<&pinctrl 134 63 1>,
+					<&pinctrl 135 67 1>,
+					<&pinctrl 136 71 1>,
+					<&pinctrl 137 73 1>,
+					<&pinctrl 138 77 1>,
+					<&pinctrl 139 79 1>,
+					<&pinctrl 140 81 1>,
+					<&pinctrl 141 83 1>,
+					<&pinctrl 142 10 1>;
+		};
+
+		ts_adc_syscon: ts_adc_syscon@180a6000 {
+			compatible = "brcm,iproc-ts-adc-syscon", "syscon";
+			reg = <0x180a6000 0xc30>;
+		};
+
+		touchscreen: touchscreen@180a6000 {
+			compatible = "brcm,iproc-touchscreen";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ts_syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		adc: adc@180a6000 {
+			compatible = "brcm,iproc-static-adc";
+			#io-channel-cells = <1>;
+			adc-syscon = <&ts_adc_syscon>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>;
+			clock-names = "tsc_clk";
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm: pwm@180aa500 {
+			compatible = "brcm,kona-pwm";
+			reg = <0x180aa500 0xc4>;
+			#pwm-cells = <3>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_PWM_CLK>;
+			status = "disabled";
+		};
+
+		keypad: keypad@180ac000 {
+			compatible = "brcm,bcm-keypad";
+			reg = <0x180ac000 0x14c>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&asiu_clks BCM_CYGNUS_ASIU_KEYPAD_CLK>;
+			clock-names = "peri_clk";
+			clock-frequency = <31250>;
+			pull-up-enabled;
+			col-debounce-filter-period = <0>;
+			status-debounce-filter-period = <0>;
+			row-output-enabled;
+			status = "disabled";
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/bcm-hr2.dtsi b/arch/arm/boot/dts/bcm-hr2.dtsi
new file mode 100644
index 000000000000..33e6ba63a1ee
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-hr2.dtsi
@@ -0,0 +1,368 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2017 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,hr2";
+	model = "Broadcom Hurricane 2 SoC";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>;
+	};
+
+	mpcore@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,hr2-armpll";
+			clocks = <&osc>;
+			reg = <0x0 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uart0: serial@300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x22000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x26000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-hr2-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* partitions defined in board DTS */
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+
+		watchdog: watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c1: i2c@3b000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x3b000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+		};
+	};
+
+	pflash: nor@20000000 {
+		compatible = "cfi-flash", "jedec-flash";
+		reg = <0x20000000 0x04000000>;
+		status = "disabled";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* partitions defined in board DTS */
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm-nsp-ax.dtsi b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
new file mode 100644
index 000000000000..f2e941dbab10
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp-ax.dtsi
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar Plus Ax stepping-specific bindings.
+ * Notable differences from B0+ are the secondary-boot-reg and
+ * lack of DMA coherency.
+ */
+
+&cpu1 {
+	secondary-boot-reg = <0xffff042c>;
+};
+
+&dma {
+	/delete-property/ dma-coherent;
+};
+
+&sdio {
+	/delete-property/ dma-coherent;
+};
+
+&amac0 {
+	/delete-property/ dma-coherent;
+};
+
+&amac1 {
+	/delete-property/ dma-coherent;
+};
+
+&amac2 {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&mailbox {
+	/delete-property/ dma-coherent;
+};
+
+&xhci {
+	/delete-property/ dma-coherent;
+};
+
+&ehci0 {
+	/delete-property/ dma-coherent;
+};
+
+&ohci0 {
+	/delete-property/ dma-coherent;
+};
+
+&i2c0 {
+	/delete-property/ dma-coherent;
+};
+
+&sata {
+	/delete-property/ dma-coherent;
+};
+
+&pcie0 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie1 {
+	/delete-property/ dma-coherent;
+};
+
+&pcie2 {
+	/delete-property/ dma-coherent;
+};
diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
new file mode 100644
index 000000000000..5b1dc58d40ba
--- /dev/null
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -0,0 +1,695 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/bcm-nsp.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,nsp";
+	model = "Broadcom Northstar Plus SoC";
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		ethernet0 = &amac0;
+		ethernet1 = &amac1;
+		ethernet2 = &amac2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			enable-method = "brcm,bcm-nsp-smp";
+			secondary-boot-reg = <0xffff0fec>;
+			reg = <0x1>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	mpcore-bus@19000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x19000000 0x00023000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		timer@20200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-timer@20600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		twd-watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&periph_clk>;
+		};
+
+		gic: interrupt-controller@21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
+		};
+
+		L2: cache-controller@22000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x22000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		osc: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+	};
+
+	axi: axi@18000000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18000000 0x0011c40c>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpioa: gpio@20 {
+			compatible = "brcm,nsp-gpio-a";
+			reg = <0x0020 0x70>,
+			      <0x3f1c4 0x1c>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <32>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-ranges = <&pinctrl 0 0 32>;
+		};
+
+		uart0: serial@300 {
+			compatible = "ns16550a";
+			reg = <0x0300 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		uart1: serial@400 {
+			compatible = "ns16550a";
+			reg = <0x0400 0x100>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc>;
+			status = "disabled";
+		};
+
+		dma: dma@20000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x20000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		sdio: mmc@21000 {
+			compatible = "brcm,sdhci-iproc-cygnus";
+			reg = <0x21000 0x100>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			sdhci,auto-cmd12;
+			clocks = <&lcpll0 BCM_NSP_LCPLL0_SDIO_CLK>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac0: ethernet@22000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x022000 0x1000>,
+			      <0x110000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac1: ethernet@23000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x023000 0x1000>,
+			      <0x111000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		amac2: ethernet@24000 {
+			compatible = "brcm,nsp-amac";
+			reg = <0x024000 0x1000>,
+			      <0x112000 0x1000>;
+			reg-names = "amac_base", "idm_base";
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		mailbox: mailbox@25c00 {
+			compatible = "brcm,iproc-fa2-mbox";
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+			brcm,rx-status-len = <32>;
+			brcm,use-bcm-hdr;
+			dma-coherent;
+		};
+
+		nand_controller: nand-controller@26000 {
+			compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
+			reg = <0x026000 0x600>,
+			      <0x11b408 0x600>,
+			      <0x026f00 0x20>;
+			reg-names = "nand", "iproc-idm", "iproc-ext";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			brcm,nand-has-wp;
+		};
+
+		qspi: spi@27200 {
+			compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+			reg = <0x027200 0x184>,
+			      <0x027000 0x124>,
+			      <0x11c408 0x004>,
+			      <0x0273a0 0x01c>;
+			reg-names = "mspi", "bspi", "intr_regs",
+				    "intr_status_reg";
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "spi_lr_fullness_reached",
+					  "spi_lr_session_aborted",
+					  "spi_lr_impatient",
+					  "spi_lr_session_done",
+					  "spi_lr_overhead",
+					  "mspi_done",
+					  "mspi_halted";
+			clocks = <&iprocmed>;
+			clock-names = "iprocmed";
+			num-cs = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		xhci: usb@29000 {
+			compatible = "generic-xhci";
+			reg = <0x29000 0x1000>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb3_phy>;
+			phy-names = "usb3-phy";
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ehci0: usb@2a000 {
+			compatible = "generic-ehci";
+			reg = <0x2a000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		ohci0: usb@2b000 {
+			compatible = "generic-ohci";
+			reg = <0x2b000 0x100>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		crypto@2f000 {
+			compatible = "brcm,spum-nsp-crypto";
+			reg = <0x2f000 0x900>;
+			mboxes = <&mailbox 0>;
+		};
+
+		gpiob: gpio@30000 {
+			compatible = "brcm,iproc-nsp-gpio", "brcm,iproc-gpio";
+			reg = <0x30000 0x50>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			ngpios = <4>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pwm: pwm@31000 {
+			compatible = "brcm,iproc-pwm";
+			reg = <0x31000 0x28>;
+			clocks = <&osc>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		mdio: mdio@32000 {
+			compatible = "brcm,iproc-mdio";
+			reg = <0x32000 0x8>;
+			#size-cells = <0>;
+			#address-cells = <1>;
+		};
+
+		mdio-mux@32000 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
+			reg = <0x32000 0x4>;
+			mux-mask = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mdio-parent-bus = <&mdio>;
+
+			mdio_int: mdio@0 {
+				reg = <0x0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				usb3_phy: usb3-phy@10 {
+					compatible = "brcm,ns-bx-usb3-phy";
+					reg = <0x10>;
+					usb3-dmp-syscon = <&usb3_dmp>;
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+			};
+
+			mdio_ext: mdio@200 {
+				reg = <0x200>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		rng: rng@33000 {
+			compatible = "brcm,bcm-nsp-rng";
+			reg = <0x33000 0x14>;
+		};
+
+		ccbtimer0: timer@34000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x34000 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		ccbtimer1: timer@35000 {
+			compatible = "arm,sp804", "arm,primecell";
+			reg = <0x35000 0x1000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>;
+			clock-names = "apb_pclk";
+		};
+
+		srab: ethernet-switch@36000 {
+			compatible = "brcm,nsp-srab";
+			reg = <0x36000 0x1000>,
+			      <0x3f308 0x8>,
+			      <0x3f410 0xc>;
+			reg-names = "srab", "mux_config", "sgmii_config";
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "link_state_p0",
+					  "link_state_p1",
+					  "link_state_p2",
+					  "link_state_p3",
+					  "link_state_p4",
+					  "link_state_p5",
+					  "link_state_p7",
+					  "link_state_p8",
+					  "phy",
+					  "ts",
+					  "imp_sleep_timer_p5",
+					  "imp_sleep_timer_p7",
+					  "imp_sleep_timer_p8";
+			status = "disabled";
+
+			/* ports are defined in board DTS */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		i2c0: i2c@38000 {
+			compatible = "brcm,iproc-i2c";
+			reg = <0x38000 0x50>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <100000>;
+			dma-coherent;
+			status = "disabled";
+		};
+
+		watchdog@39000 {
+			compatible = "arm,sp805", "arm,primecell";
+			reg = <0x39000 0x1000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&iprocslow>, <&iprocslow>;
+			clock-names = "wdog_clk", "apb_pclk";
+		};
+
+		lcpll0: lcpll0@3f100 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-lcpll0";
+			reg = <0x3f100 0x14>;
+			clocks = <&osc>;
+			clock-output-names = "lcpll0", "pcie_phy", "sdio",
+					     "ddr_phy";
+		};
+
+		genpll: genpll@3f140 {
+			#clock-cells = <1>;
+			compatible = "brcm,nsp-genpll";
+			reg = <0x3f140 0x24>;
+			clocks = <&osc>;
+			clock-output-names = "genpll", "phy", "ethernetclk",
+					     "usbclk", "iprocfast", "sata1",
+					     "sata2";
+		};
+
+		pinctrl: pinctrl@3f1c0 {
+			compatible = "brcm,nsp-pinmux";
+			reg = <0x3f1c0 0x04>,
+			      <0x30028 0x04>,
+			      <0x3f408 0x04>;
+		};
+
+		thermal: thermal@3f2c0 {
+			compatible = "brcm,ns-thermal";
+			reg = <0x3f2c0 0x10>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		sata_phy: sata_phy@40100 {
+			compatible = "brcm,iproc-nsp-sata-phy";
+			reg = <0x40100 0x340>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+
+			sata_phy1: sata-phy@1 {
+				reg = <1>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		sata: sata@41000 {
+			compatible = "brcm,bcm-nsp-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0x41000 0x1000>, <0x40020 0x1c>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			dma-coherent;
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+				phy-names = "sata-phy";
+			};
+
+			sata1: sata-port@1 {
+				reg = <1>;
+				phys = <&sata_phy1>;
+				phy-names = "sata-phy";
+			};
+		};
+
+		usb3_dmp: syscon@104000 {
+			reg = <0x104000 0x1000>;
+		};
+	};
+
+	pcie0: pcie@18012000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18012000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <0>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x08000000 0x08000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi0>;
+		msi0: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie1: pcie@18013000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18013000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <1>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x40000000 0x40000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi1>;
+		msi1: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	pcie2: pcie@18014000 {
+		compatible = "brcm,iproc-pcie";
+		reg = <0x18014000 0x1000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+
+		linux,pci-domain = <2>;
+
+		bus-range = <0x00 0xff>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+
+		/* Note: The HW does not support I/O resources.  So,
+		 * only the memory resource range is being specified.
+		 */
+		ranges = <0x82000000 0 0x48000000 0x48000000 0 0x8000000>;
+
+		dma-coherent;
+		status = "disabled";
+
+		msi-parent = <&msi2>;
+		msi2: msi {
+			compatible = "brcm,iproc-msi";
+			msi-controller;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+			brcm,pcie-msi-inten;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature     = <125000>;
+					hysteresis      = <0>;
+					type            = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 2ddaa5136611..ba75784d66a9 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -1,24 +1,14 @@
-/*
- * Copyright (C) 2012-2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2012-2013 Broadcom Corporation
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #include "dt-bindings/clock/bcm281xx.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM11351 SoC";
 	compatible = "brcm,bcm11351";
 	interrupt-parent = <&gic>;
@@ -30,8 +20,6 @@
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x3500417c>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -42,6 +30,8 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x3500417c>;
 			reg = <1>;
 		};
 	};
@@ -55,12 +45,12 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404c000 {
+	smc@3404c000 {
 		compatible = "brcm,bcm11351-smc", "brcm,kona-smc";
 		reg = <0x3404c000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x1000>;
@@ -70,7 +60,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e001000 {
+	serial@3e001000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x1000>;
@@ -80,7 +70,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e002000 {
+	serial@3e002000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x1000>;
@@ -90,7 +80,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e003000 {
+	serial@3e003000 {
 		compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e003000 0x1000>;
@@ -100,7 +90,7 @@
 		reg-io-width = <4>;
 	};
 
-	L2: l2-cache {
+	L2: l2-cache@3ff20000 {
 		compatible = "brcm,bcm11351-a2-pl310-cache";
 		reg = <0x3ff20000 0x1000>;
 		cache-unified;
@@ -225,21 +215,21 @@
 		#size-cells = <1>;
 		ranges;
 
-		root_ccu: root_ccu {
+		root_ccu: root_ccu@35001000 {
 			compatible = "brcm,bcm11351-root-ccu";
 			reg = <0x35001000 0x0f00>;
 			#clock-cells = <1>;
 			clock-output-names = "frac_1m";
 		};
 
-		hub_ccu: hub_ccu {
+		hub_ccu: hub_ccu@34000000 {
 			compatible = "brcm,bcm11351-hub-ccu";
 			reg = <0x34000000 0x0f00>;
 			#clock-cells = <1>;
 			clock-output-names = "tmon_1m";
 		};
 
-		aon_ccu: aon_ccu {
+		aon_ccu: aon_ccu@35002000 {
 			compatible = "brcm,bcm11351-aon-ccu";
 			reg = <0x35002000 0x0f00>;
 			#clock-cells = <1>;
@@ -248,7 +238,7 @@
 					     "pmu_bsc_var";
 		};
 
-		master_ccu: master_ccu {
+		master_ccu: master_ccu@3f001000 {
 			compatible = "brcm,bcm11351-master-ccu";
 			reg = <0x3f001000 0x0f00>;
 			#clock-cells = <1>;
@@ -261,7 +251,7 @@
 					     "hsic2_12m";
 		};
 
-		slave_ccu: slave_ccu {
+		slave_ccu: slave_ccu@3e011000 {
 			compatible = "brcm,bcm11351-slave-ccu";
 			reg = <0x3e011000 0x0f00>;
 			#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm21664-garnet.dts b/arch/arm/boot/dts/bcm21664-garnet.dts
index e87cb26ddf84..cd03fa0c2aae 100644
--- a/arch/arm/boot/dts/bcm21664-garnet.dts
+++ b/arch/arm/boot/dts/bcm21664-garnet.dts
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 /dts-v1/;
 
@@ -21,11 +11,12 @@
 	model = "BCM21664 Garnet board";
 	compatible = "brcm,bcm21664-garnet", "brcm,bcm21664";
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi
index 2016b72a8fb7..ed4de031e48e 100644
--- a/arch/arm/boot/dts/bcm21664.dtsi
+++ b/arch/arm/boot/dts/bcm21664.dtsi
@@ -1,24 +1,14 @@
-/*
- * Copyright (C) 2014 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2014 Broadcom Corporation
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #include "dt-bindings/clock/bcm21664.h"
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	model = "BCM21664 SoC";
 	compatible = "brcm,bcm21664";
 	interrupt-parent = <&gic>;
@@ -27,11 +17,9 @@
 		bootargs = "console=ttyS0,115200n8";
 	};
 
-       cpus {
+	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-method = "brcm,bcm11351-cpu-method";
-		secondary-boot-reg = <0x35004178>;
 
 		cpu0: cpu@0 {
 			device_type = "cpu";
@@ -42,6 +30,8 @@
 		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
+			enable-method = "brcm,bcm11351-cpu-method";
+			secondary-boot-reg = <0x35004178>;
 			reg = <1>;
 		};
 	};
@@ -55,12 +45,12 @@
 		      <0x3ff00100 0x100>;
 	};
 
-	smc@0x3404e000 {
+	smc@3404e000 {
 		compatible = "brcm,bcm21664-smc", "brcm,kona-smc";
 		reg = <0x3404e000 0x400>; /* 1 KiB in SRAM */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e000000 0x118>;
@@ -70,7 +60,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e001000 {
+	serial@3e001000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e001000 0x118>;
@@ -80,7 +70,7 @@
 		reg-io-width = <4>;
 	};
 
-	uart@3e002000 {
+	serial@3e002000 {
 		compatible = "brcm,bcm21664-dw-apb-uart", "snps,dw-apb-uart";
 		status = "disabled";
 		reg = <0x3e002000 0x118>;
@@ -90,7 +80,7 @@
 		reg-io-width = <4>;
 	};
 
-	L2: l2-cache {
+	L2: cache-controller@3ff20000 {
 		compatible = "arm,pl310-cache";
 		reg = <0x3ff20000 0x1000>;
 		cache-unified;
@@ -295,21 +285,21 @@
 			clock-frequency = <156000000>;
 		};
 
-		root_ccu: root_ccu {
+		root_ccu: root_ccu@35001000 {
 			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
 			reg = <0x35001000 0x0f00>;
 			#clock-cells = <1>;
 			clock-output-names = "frac_1m";
 		};
 
-		aon_ccu: aon_ccu {
+		aon_ccu: aon_ccu@35002000 {
 			compatible = BCM21664_DT_AON_CCU_COMPAT;
 			reg = <0x35002000 0x0f00>;
 			#clock-cells = <1>;
 			clock-output-names = "hub_timer";
 		};
 
-		master_ccu: master_ccu {
+		master_ccu: master_ccu@3f001000 {
 			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
 			reg = <0x3f001000 0x0f00>;
 			#clock-cells = <1>;
@@ -323,7 +313,7 @@
 					     "sdio4_sleep";
 		};
 
-		slave_ccu: slave_ccu {
+		slave_ccu: slave_ccu@3e011000 {
 			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
 			reg = <0x3e011000 0x0f00>;
 			#clock-cells = <1>;
diff --git a/arch/arm/boot/dts/bcm23550-sparrow.dts b/arch/arm/boot/dts/bcm23550-sparrow.dts
new file mode 100644
index 000000000000..ace77709f468
--- /dev/null
+++ b/arch/arm/boot/dts/bcm23550-sparrow.dts
@@ -0,0 +1,81 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "bcm23550.dtsi"
+
+/ {
+	model = "BCM23550 Sparrow board";
+	compatible = "brcm,bcm23550-sparrow", "brcm,bcm23550";
+
+	chosen {
+		stdout-path = "/slaves@3e000000/serial@0:115200n8";
+		bootargs = "console=ttyS0,115200n8";
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512 MB */
+	};
+};
+
+&uartb {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
+
+&sdio1 {
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio2 {
+	non-removable;
+	max-frequency = <48000000>;
+	status = "okay";
+};
+
+&sdio4 {
+	max-frequency = <48000000>;
+	cd-gpios = <&gpio 91 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm23550.dtsi b/arch/arm/boot/dts/bcm23550.dtsi
new file mode 100644
index 000000000000..a36c9b1d23c8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm23550.dtsi
@@ -0,0 +1,415 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* BCM23550 and BCM21664 have almost identical clocks */
+#include "dt-bindings/clock/bcm21664.h"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "BCM23550 SoC";
+	compatible = "brcm,bcm23550";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <1>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <2>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			enable-method = "brcm,bcm23550";
+			secondary-boot-reg = <0x35004178>;
+			reg = <3>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	/* Hub bus */
+	hub@34000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x34000000 0x102f83ac>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		smc@4e000 {
+			compatible = "brcm,bcm23550-smc", "brcm,kona-smc";
+			reg = <0x0004e000 0x400>; /* 1 KiB in SRAM */
+		};
+
+		resetmgr: reset-controller@1001f00 {
+			compatible = "brcm,bcm21664-resetmgr";
+			reg = <0x01001f00 0x24>;
+		};
+
+		gpio: gpio@1003000 {
+			compatible = "brcm,bcm23550-gpio", "brcm,kona-gpio";
+			reg = <0x01003000 0x524>;
+			interrupts =
+			       <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH
+				GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+		};
+
+		timer@1006000 {
+			compatible = "brcm,kona-timer";
+			reg = <0x01006000 0x1c>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&aon_ccu BCM21664_AON_CCU_HUB_TIMER>;
+		};
+	};
+
+	/* Slaves bus */
+	slaves@3e000000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e000000 0x0001c070>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		uartb: serial@0 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00000000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb2: serial@1000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00001000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB2>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		uartb3: serial@2000 {
+			compatible = "snps,dw-apb-uart";
+			status = "disabled";
+			reg = <0x00002000 0x118>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_UARTB3>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+		};
+
+		bsc1: i2c@16000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00016000 0x70>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC1>;
+			status = "disabled";
+		};
+
+		bsc2: i2c@17000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00017000 0x70>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC2>;
+			status = "disabled";
+		};
+
+		bsc3: i2c@18000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x00018000 0x70>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC3>;
+			status = "disabled";
+		};
+
+		bsc4: i2c@1c000 {
+			compatible = "brcm,kona-i2c";
+			reg = <0x0001c000 0x70>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&slave_ccu BCM21664_SLAVE_CCU_BSC4>;
+			status = "disabled";
+		};
+	};
+
+	/* Apps bus */
+	apps@3e300000 {
+		compatible = "simple-bus";
+		ranges = <0 0x3e300000 0x01b77000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		usbotg: usb@e20000 {
+			compatible = "snps,dwc2";
+			reg = <0x00e20000 0x10000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&usb_otg_ahb_clk>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
+
+		usbphy: usb-phy@e30000 {
+			compatible = "brcm,kona-usb2-phy";
+			reg = <0x00e30000 0x28>;
+			#phy-cells = <0>;
+			status = "disabled";
+		};
+
+		sdio1: sdio@e80000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e80000 0x801c>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO1>;
+			status = "disabled";
+		};
+
+		sdio2: sdio@e90000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00e90000 0x801c>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO2>;
+			status = "disabled";
+		};
+
+		sdio3: sdio@ea0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00ea0000 0x801c>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO3>;
+			status = "disabled";
+		};
+
+		sdio4: sdio@eb0000 {
+			compatible = "brcm,kona-sdhci";
+			reg = <0x00eb0000 0x801c>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&master_ccu BCM21664_MASTER_CCU_SDIO4>;
+			status = "disabled";
+		};
+
+		cdc: cdc@1b0e000 {
+			compatible = "brcm,bcm23550-cdc";
+			reg = <0x01b0e000 0x78>;
+		};
+
+		gic: interrupt-controller@1b21000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x01b21000 0x1000>,
+			      <0x01b22000 0x1000>;
+		};
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * Fixed clocks are defined before CCUs whose
+		 * clocks may depend on them.
+		 */
+
+		ref_32k_clk: ref_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		bbl_32k_clk: bbl_32k {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ref_13m_clk: ref_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		var_13m_clk: var_13m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <13000000>;
+		};
+
+		dft_19_5m_clk: dft_19_5m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <19500000>;
+		};
+
+		ref_crystal_clk: ref_crystal {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <26000000>;
+		};
+
+		ref_52m_clk: ref_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		var_52m_clk: var_52m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		usb_otg_ahb_clk: usb_otg_ahb {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <52000000>;
+		};
+
+		ref_96m_clk: ref_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		var_96m_clk: var_96m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <96000000>;
+		};
+
+		ref_104m_clk: ref_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		var_104m_clk: var_104m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <104000000>;
+		};
+
+		ref_156m_clk: ref_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		var_156m_clk: var_156m {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <156000000>;
+		};
+
+		root_ccu: root_ccu@35001000 {
+			compatible = BCM21664_DT_ROOT_CCU_COMPAT;
+			reg = <0x35001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "frac_1m";
+		};
+
+		aon_ccu: aon_ccu@35002000 {
+			compatible = BCM21664_DT_AON_CCU_COMPAT;
+			reg = <0x35002000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "hub_timer";
+		};
+
+		slave_ccu: slave_ccu@3e011000 {
+			compatible = BCM21664_DT_SLAVE_CCU_COMPAT;
+			reg = <0x3e011000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "uartb",
+					     "uartb2",
+					     "uartb3",
+					     "bsc1",
+					     "bsc2",
+					     "bsc3",
+					     "bsc4";
+		};
+
+		master_ccu: master_ccu@3f001000 {
+			compatible = BCM21664_DT_MASTER_CCU_COMPAT;
+			reg = <0x3f001000 0x0f00>;
+			#clock-cells = <1>;
+			clock-output-names = "sdio1",
+					     "sdio2",
+					     "sdio3",
+					     "sdio4",
+					     "sdio1_sleep",
+					     "sdio2_sleep",
+					     "sdio3_sleep",
+					     "sdio4_sleep";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
new file mode 100644
index 000000000000..d5f8823230db
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-peripheral.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
+	model = "Raspberry Pi 4 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",		/*  0 */
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",		/*  5 */
+			  "SD_PWR_ON",
+			  "";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",		/*  0 */
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",		/*  5 */
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",		/* 10 */
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",		/* 15 */
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",		/* 20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",		/* 25 */
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",		/* 30 */
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",		/* 35 */
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",		/* 40 */
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",		/* 45 */
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",		/* 50 */
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",		/* 55 */
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led_pwr: led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
+	status = "okay";
+};
+
+/* EMMC2 is used to drive the SD card */
+&emmc2 {
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	status = "okay";
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@1 {
+		/* No PHY interrupt */
+		reg = <0x1>;
+	};
+};
+
+&pcie0 {
+	pci@0,0 {
+		device_type = "pci";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges;
+
+		reg = <0 0 0 0 0>;
+
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
+			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
+		};
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-400.dts b/arch/arm/boot/dts/bcm2711-rpi-400.dts
new file mode 100644
index 000000000000..1ab8184302db
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-4-b.dts"
+
+/ {
+	compatible = "raspberrypi,400", "brcm,bcm2711";
+	model = "Raspberry Pi 400";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&expgpio 5 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "GLOBAL_RESET",
+			  "VDD_SD_IO_SEL",
+			  "GLOBAL_SHUTDOWN",
+			  "SD_PWR_ON",
+			  "SHUTDOWN_REQUEST";
+};
+
+&genet_mdio {
+	clock-frequency = <1950000>;
+};
+
+&led_pwr {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	/delete-node/ led_act;
+};
+
+&pm {
+	/delete-property/ system-power-controller;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
new file mode 100644
index 000000000000..d7ba02f586d3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711-rpi-cm4.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	model = "Raspberry Pi Compute Module 4 IO Board";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&gpio {
+	/*
+	 * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "RGMII_MDIO",
+			  "RGMIO_MDC",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  /* Shared with SPI flash */
+			  "PWM0_MISO",
+			  "PWM1_MOSI",
+			  "STATUS_LED_G_CLK",
+			  "SPIFLASH_CE_N",
+			  "SDA0",
+			  "SCL0",
+			  "RGMII_RXCLK",
+			  "RGMII_RXCTL",
+			  "RGMII_RXD0",
+			  "RGMII_RXD1",
+			  "RGMII_RXD2",
+			  "RGMII_RXD3",
+			  "RGMII_TXCLK",
+			  "RGMII_TXCTL",
+			  "RGMII_TXD0",
+			  "RGMII_TXD1",
+			  "RGMII_TXD2",
+			  "RGMII_TXD3";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&genet {
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&vc4 {
+	status = "okay";
+};
+
+&vec {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
new file mode 100644
index 000000000000..48e63ab7848c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2711.dtsi"
+#include "bcm2711-rpi.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	sd_io_1v8_reg: regulator-sd-io-1v8 {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd-sd-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		regulator-settling-time-us = <5000>;
+		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		status = "okay";
+	};
+
+	sd_vcc_reg: regulator-sd-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+/* EMMC2 is used to drive the eMMC */
+&emmc2 {
+	bus-width = <8>;
+	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
+	broken-cd;
+	/* Even the IP block is limited to 100 MHz
+	 * this provides a throughput gain
+	 */
+	mmc-hs200-1_8v;
+	status = "okay";
+};
+
+&expgpio {
+	gpio-line-names = "BT_ON",
+			  "WL_ON",
+			  "PWR_LED_OFF",
+			  "ANT1",
+			  "VDD_SD_IO_SEL",
+			  "CAM_GPIO",
+			  "SD_PWR_ON",
+			  "ANT2";
+
+	ant1: ant1-hog {
+		gpio-hog;
+		gpios = <3 GPIO_ACTIVE_HIGH>;
+		/* internal antenna enabled */
+		output-high;
+		line-name = "ant1";
+	};
+
+	ant2: ant2-hog {
+		gpio-hog;
+		gpios = <7 GPIO_ACTIVE_HIGH>;
+		/* external antenna disabled */
+		output-low;
+		line-name = "ant2";
+	};
+};
+
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-rxid";
+	status = "okay";
+};
+
+&genet_mdio {
+	phy1: ethernet-phy@0 {
+		/* No PHY interrupt */
+		reg = <0x0>;
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
+	uart-has-rtscts;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2711-rpi.dtsi b/arch/arm/boot/dts/bcm2711-rpi.dtsi
new file mode 100644
index 000000000000..98817a6675b9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711-rpi.dtsi
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+
+#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0 0>;
+	};
+
+	aliases {
+		emmc2bus = &emmc2bus;
+		ethernet0 = &genet;
+		pcie0 = &pcie0;
+		blconfig = &blconfig;
+	};
+};
+
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+
+	reset: reset {
+		compatible = "raspberrypi,firmware-reset";
+		#reset-cells = <1>;
+	};
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
+	clock-names = "hdmi", "bvb", "audio", "cec";
+	wifi-2.4ghz-coexistence;
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
+
+&rmem {
+	/*
+	 * RPi4's co-processor will copy the board's bootloader configuration
+	 * into memory for the OS to consume. It'll also update this node with
+	 * its placement information.
+	 */
+	blconfig: nvram@0 {
+		compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x0 0x0 0x0>;
+		no-map;
+		status = "disabled";
+	};
+};
+
+&v3d {
+	clocks = <&firmware_clocks 5>;
+};
+
+&vchiq {
+	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
new file mode 100644
index 000000000000..097e9f252235
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -0,0 +1,1172 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/ {
+	compatible = "brcm,bcm2711";
+
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gicv2>;
+
+	vc4: gpu {
+		compatible = "brcm,bcm2711-vc5";
+		status = "disabled";
+	};
+
+	clk_27MHz: clk-27M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		clock-output-names = "27MHz-clock";
+	};
+
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
+	soc {
+		/*
+		 * Defined ranges:
+		 *   Common BCM283x peripherals
+		 *   BCM2711-specific peripherals
+		 *   ARM-local peripherals
+		 */
+		ranges = <0x7e000000  0x0 0xfe000000  0x01800000>,
+			 <0x7c000000  0x0 0xfc000000  0x02000000>,
+			 <0x40000000  0x0 0xff800000  0x00800000>;
+		/* Emulate a contiguous 30-bit address range for DMA */
+		dma-ranges = <0xc0000000  0x0 0x00000000  0x40000000>;
+
+		/*
+		 * This node is the provider for the enable-method for
+		 * bringing up secondary cores.
+		 */
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+		};
+
+		gicv2: interrupt-controller@40041000 {
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "arm,gic-400";
+			reg =	<0x40041000 0x1000>,
+				<0x40042000 0x2000>,
+				<0x40044000 0x2000>,
+				<0x40046000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		avs_monitor: avs-monitor@7d5d2000 {
+			compatible = "brcm,bcm2711-avs-monitor",
+				     "syscon", "simple-mfd";
+			reg = <0x7d5d2000 0xf00>;
+
+			thermal: thermal {
+				compatible = "brcm,bcm2711-thermal";
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xb00>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     /* DMA lite 7 - 10 */
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x07f5>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2711-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>,
+			      <0x7ec11000 0x20>;
+			reg-names = "pm", "asb", "rpivid_asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2711-rng200";
+			reg = <0x7e104000 0x28>;
+		};
+
+		uart2: serial@7e201400 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201400 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart3: serial@7e201600 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201600 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart4: serial@7e201800 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201800 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		uart5: serial@7e201a00 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201a00 0x200>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+			status = "disabled";
+		};
+
+		spi3: spi@7e204600 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204600 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@7e204800 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204800 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi5: spi@7e204a00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204a00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi6: spi@7e204c00 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204c00 0x0200>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@7e205600 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205600 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@7e205800 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205800 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@7e205a00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205a00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@7e205c00 {
+			compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+			reg = <0x7e205c00 0x200>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pixelvalve0: pixelvalve@7e206000 {
+			compatible = "brcm,bcm2711-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve1: pixelvalve@7e207000 {
+			compatible = "brcm,bcm2711-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve2: pixelvalve@7e20a000 {
+			compatible = "brcm,bcm2711-pixelvalve2";
+			reg = <0x7e20a000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@7e20c800 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c800 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pixelvalve4: pixelvalve@7e216000 {
+			compatible = "brcm,bcm2711-pixelvalve4";
+			reg = <0x7e216000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		hvs: hvs@7e400000 {
+			compatible = "brcm,bcm2711-hvs";
+			reg = <0x7e400000 0x8000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pixelvalve3: pixelvalve@7ec12000 {
+			compatible = "brcm,bcm2711-pixelvalve3";
+			reg = <0x7ec12000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dvp: clock@7ef00000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7ef00000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		aon_intr: interrupt-controller@7ef00100 {
+			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
+			reg = <0x7ef00100 0x30>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		hdmi0: hdmi@7ef00700 {
+			compatible = "brcm,bcm2711-hdmi0";
+			reg = <0x7ef00700 0x300>,
+			      <0x7ef00300 0x200>,
+			      <0x7ef00f00 0x80>,
+			      <0x7ef00f80 0x80>,
+			      <0x7ef01b00 0x200>,
+			      <0x7ef01f00 0x400>,
+			      <0x7ef00200 0x80>,
+			      <0x7ef04300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 0>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <0>, <1>, <2>,
+				     <3>, <4>, <5>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			ddc = <&ddc0>;
+			dmas = <&dma 10>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc0: i2c@7ef04500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+
+		hdmi1: hdmi@7ef05700 {
+			compatible = "brcm,bcm2711-hdmi1";
+			reg = <0x7ef05700 0x300>,
+			      <0x7ef05300 0x200>,
+			      <0x7ef05f00 0x80>,
+			      <0x7ef05f80 0x80>,
+			      <0x7ef06b00 0x200>,
+			      <0x7ef06f00 0x400>,
+			      <0x7ef00280 0x80>,
+			      <0x7ef09300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			ddc = <&ddc1>;
+			clock-names = "hdmi", "bvb", "audio", "cec";
+			resets = <&dvp 1>;
+			interrupt-parent = <&aon_intr>;
+			interrupts = <8>, <7>, <6>,
+				     <9>, <10>, <11>;
+			interrupt-names = "cec-tx", "cec-rx", "cec-low",
+					  "wakeup", "hpd-connected", "hpd-removed";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc1: i2c@7ef09500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <97500>;
+			status = "disabled";
+		};
+	};
+
+	/*
+	 * emmc2 has different DMA constraints based on SoC revisions. It was
+	 * moved into its own bus, so as for RPi4's firmware to update them.
+	 * The firmware will find whether the emmc2bus alias is defined, and if
+	 * so, it'll edit the dma-ranges property below accordingly.
+	 */
+	emmc2bus: emmc2bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7e000000  0x0 0xfe000000  0x01800000>;
+		dma-ranges = <0x0 0xc0000000  0x0 0x00000000  0x40000000>;
+
+		emmc2: mmc@7e340000 {
+			compatible = "brcm,bcm2711-emmc2";
+			reg = <0x0 0x7e340000 0x100>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clocks BCM2711_CLOCK_EMMC2>;
+			status = "disabled";
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a72-pmu", "arm,armv8-pmuv3";
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+					  IRQ_TYPE_LEVEL_LOW)>;
+		/* This only applies to the ARMv7 stub */
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/100095/0003
+		 * /Level-1-Memory-System/About-the-L1-memory-system?lang=en
+		 * Source for d/i-cache-size
+		 * https://www.raspberrypi.com/documentation/computers
+		 * /processors.html#bcm2711
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a72";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			i-cache-size = <0xc000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 48KiB(size)/64(line-size)=768ways/3-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 *  https://developer.arm.com/documentation/100095/0003
+		 *  /Level-2-Memory-System/About-the-L2-memory-system?lang=en
+		 *  Source for d/i-cache-size
+		 *  https://www.raspberrypi.com/documentation/computers
+		 *  /processors.html#bcm2711
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 1MiB(size)/64(line-size)=16384ways/16-way set
+			cache-level = <2>;
+		};
+	};
+
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>,
+			 <0x6 0x00000000  0x6 0x00000000  0x40000000>;
+
+		pcie0: pcie@7d500000 {
+			compatible = "brcm,bcm2711-pcie";
+			reg = <0x0 0x7d500000 0x9310>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "pcie", "msi";
+			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+			interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &gicv2 GIC_SPI 144
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &gicv2 GIC_SPI 145
+							IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &gicv2 GIC_SPI 146
+							IRQ_TYPE_LEVEL_HIGH>;
+			msi-controller;
+			msi-parent = <&pcie0>;
+
+			ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000
+				  0x0 0x04000000>;
+			/*
+			 * The wrapper around the PCIe block has a bug
+			 * preventing it from accessing beyond the first 3GB of
+			 * memory.
+			 */
+			dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
+				      0x0 0xc0000000>;
+			brcm,enable-ssc;
+		};
+
+		genet: ethernet@7d580000 {
+			compatible = "brcm,bcm2711-genet-v5";
+			reg = <0x0 0x7d580000 0x10000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+
+			genet_mdio: mdio@e14 {
+				compatible = "brcm,genet-mdio-v5";
+				reg = <0xe14 0x8>;
+				reg-names = "mdio";
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
+			};
+		};
+
+		v3d: gpu@7ec00000 {
+			compatible = "brcm,2711-v3d";
+			reg = <0x0 0x7ec00000 0x4000>,
+			      <0x0 0x7ec04000 0x4000>;
+			reg-names = "hub", "core0";
+
+			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
+			resets = <&pm BCM2835_RESET_V3D>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
+
+&clk_osc {
+	clock-frequency = <54000000>;
+};
+
+&clocks {
+	compatible = "brcm,bcm2711-cprman";
+};
+
+&cpu_thermal {
+	coefficients = <(-487) 410040>;
+	thermal-sensors = <&thermal>;
+};
+
+&dsi0 {
+	interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dsi1 {
+	interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+	compatible = "brcm,bcm2711-dsi1";
+};
+
+&gpio {
+	compatible = "brcm,bcm2711-gpio";
+	interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpio-ranges = <&gpio 0 0 58>;
+
+	gpclk0_gpio49: gpclk0-gpio49 {
+		pin-gpclk {
+			pins = "gpio49";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk1_gpio50: gpclk1-gpio50 {
+		pin-gpclk {
+			pins = "gpio50";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	gpclk2_gpio51: gpclk2-gpio51 {
+		pin-gpclk {
+			pins = "gpio51";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	i2c0_gpio46: i2c0-gpio46 {
+		pin-sda {
+			function = "alt0";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt0";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c1_gpio46: i2c1-gpio46 {
+		pin-sda {
+			function = "alt1";
+			pins = "gpio46";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt1";
+			pins = "gpio47";
+			bias-disable;
+		};
+	};
+	i2c3_gpio2: i2c3-gpio2 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio2";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio3";
+			bias-disable;
+		};
+	};
+	i2c3_gpio4: i2c3-gpio4 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio4";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio5";
+			bias-disable;
+		};
+	};
+	i2c4_gpio6: i2c4-gpio6 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio6";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio7";
+			bias-disable;
+		};
+	};
+	i2c4_gpio8: i2c4-gpio8 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio8";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio9";
+			bias-disable;
+		};
+	};
+	i2c5_gpio10: i2c5-gpio10 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio10";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio11";
+			bias-disable;
+		};
+	};
+	i2c5_gpio12: i2c5-gpio12 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio12";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio13";
+			bias-disable;
+		};
+	};
+	i2c6_gpio0: i2c6-gpio0 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio0";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio1";
+			bias-disable;
+		};
+	};
+	i2c6_gpio22: i2c6-gpio22 {
+		pin-sda {
+			function = "alt5";
+			pins = "gpio22";
+			bias-pull-up;
+		};
+		pin-scl {
+			function = "alt5";
+			pins = "gpio23";
+			bias-disable;
+		};
+	};
+	i2c_slave_gpio8: i2c-slave-gpio8 {
+		pins-i2c-slave {
+			pins = "gpio8",
+			       "gpio9",
+			       "gpio10",
+			       "gpio11";
+			function = "alt3";
+		};
+	};
+
+	jtag_gpio48: jtag-gpio48 {
+		pins-jtag {
+			pins = "gpio48",
+			       "gpio49",
+			       "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt4";
+		};
+	};
+
+	mii_gpio28: mii-gpio28 {
+		pins-mii {
+			pins = "gpio28",
+			       "gpio29",
+			       "gpio30",
+			       "gpio31";
+			function = "alt4";
+		};
+	};
+	mii_gpio36: mii-gpio36 {
+		pins-mii {
+			pins = "gpio36",
+			       "gpio37",
+			       "gpio38",
+			       "gpio39";
+			function = "alt5";
+		};
+	};
+
+	pcm_gpio50: pcm-gpio50 {
+		pins-pcm {
+			pins = "gpio50",
+			       "gpio51",
+			       "gpio52",
+			       "gpio53";
+			function = "alt2";
+		};
+	};
+
+	pwm0_0_gpio12: pwm0-0-gpio12 {
+		pin-pwm {
+			pins = "gpio12";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio18: pwm0-0-gpio18 {
+		pin-pwm {
+			pins = "gpio18";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_0_gpio40: pwm1-0-gpio40 {
+		pin-pwm {
+			pins = "gpio40";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio13: pwm0-1-gpio13 {
+		pin-pwm {
+			pins = "gpio13";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio19: pwm0-1-gpio19 {
+		pin-pwm {
+			pins = "gpio19";
+			function = "alt5";
+			bias-disable;
+		};
+	};
+	pwm1_1_gpio41: pwm1-1-gpio41 {
+		pin-pwm {
+			pins = "gpio41";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio45: pwm0-1-gpio45 {
+		pin-pwm {
+			pins = "gpio45";
+			function = "alt0";
+			bias-disable;
+		};
+	};
+	pwm0_0_gpio52: pwm0-0-gpio52 {
+		pin-pwm {
+			pins = "gpio52";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+	pwm0_1_gpio53: pwm0-1-gpio53 {
+		pin-pwm {
+			pins = "gpio53";
+			function = "alt1";
+			bias-disable;
+		};
+	};
+
+	rgmii_gpio35: rgmii-gpio35 {
+		pin-start-stop {
+			pins = "gpio35";
+			function = "alt4";
+		};
+		pin-rx-ok {
+			pins = "gpio36";
+			function = "alt4";
+		};
+	};
+	rgmii_irq_gpio34: rgmii-irq-gpio34 {
+		pin-irq {
+			pins = "gpio34";
+			function = "alt5";
+		};
+	};
+	rgmii_irq_gpio39: rgmii-irq-gpio39 {
+		pin-irq {
+			pins = "gpio39";
+			function = "alt4";
+		};
+	};
+	rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
+		pins-mdio {
+			pins = "gpio28",
+			       "gpio29";
+			function = "alt5";
+		};
+	};
+	rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
+		pins-mdio {
+			pins = "gpio37",
+			       "gpio38";
+			function = "alt4";
+		};
+	};
+
+	spi0_gpio46: spi0-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49";
+			function = "alt2";
+		};
+	};
+	spi2_gpio46: spi2-gpio46 {
+		pins-spi {
+			pins = "gpio46",
+			       "gpio47",
+			       "gpio48",
+			       "gpio49",
+			       "gpio50";
+			function = "alt5";
+		};
+	};
+	spi3_gpio0: spi3-gpio0 {
+		pins-spi {
+			pins = "gpio0",
+			       "gpio1",
+			       "gpio2",
+			       "gpio3";
+			function = "alt3";
+		};
+	};
+	spi4_gpio4: spi4-gpio4 {
+		pins-spi {
+			pins = "gpio4",
+			       "gpio5",
+			       "gpio6",
+			       "gpio7";
+			function = "alt3";
+		};
+	};
+	spi5_gpio12: spi5-gpio12 {
+		pins-spi {
+			pins = "gpio12",
+			       "gpio13",
+			       "gpio14",
+			       "gpio15";
+			function = "alt3";
+		};
+	};
+	spi6_gpio18: spi6-gpio18 {
+		pins-spi {
+			pins = "gpio18",
+			       "gpio19",
+			       "gpio20",
+			       "gpio21";
+			function = "alt3";
+		};
+	};
+
+	uart2_gpio0: uart2-gpio0 {
+		pin-tx {
+			pins = "gpio0";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio1";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
+		pin-cts {
+			pins = "gpio2";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio3";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart3_gpio4: uart3-gpio4 {
+		pin-tx {
+			pins = "gpio4";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio5";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
+		pin-cts {
+			pins = "gpio6";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio7";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart4_gpio8: uart4-gpio8 {
+		pin-tx {
+			pins = "gpio8";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio9";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
+		pin-cts {
+			pins = "gpio10";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio11";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+	uart5_gpio12: uart5-gpio12 {
+		pin-tx {
+			pins = "gpio12";
+			function = "alt4";
+			bias-disable;
+		};
+		pin-rx {
+			pins = "gpio13";
+			function = "alt4";
+			bias-pull-up;
+		};
+	};
+	uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
+		pin-cts {
+			pins = "gpio14";
+			function = "alt4";
+			bias-pull-up;
+		};
+		pin-rts {
+			pins = "gpio15";
+			function = "alt4";
+			bias-disable;
+		};
+	};
+};
+
+&rmem {
+	#address-cells = <2>;
+};
+
+&cma {
+	/*
+	 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+	 * that's not good enough for the BCM2711 as some devices can
+	 * only address the lower 1G of memory (ZONE_DMA).
+	 */
+	alloc-ranges = <0x0 0x00000000 0x40000000>;
+};
+
+&i2c0 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c1 {
+	compatible = "brcm,bcm2711-i2c", "brcm,bcm2835-i2c";
+	interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mailbox {
+	interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhci {
+	interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sdhost {
+	interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi {
+	interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&spi2 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&system_timer {
+	interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&txp {
+	interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+	interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+	interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usb {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&vec {
+	compatible = "brcm,bcm2711-vec";
+	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 9ce91dd60cb6..60c8ab8a2855 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -1,15 +1,5 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Broadcom Corporation
 
 /dts-v1/;
 
@@ -21,31 +11,32 @@
 	model = "BCM28155 AP board";
 	compatible = "brcm,bcm28155-ap", "brcm,bcm11351";
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x40000000>; /* 1 GB */
 	};
 
-	uart@3e000000 {
+	serial@3e000000 {
 		status = "okay";
 	};
 
 	i2c@3e016000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3e017000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3e018000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <400000>;
 	};
 
 	i2c@3500d000 {
-		status="okay";
+		status = "okay";
 		clock-frequency = <100000>;
 
 		pmu: pmu@8 {
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
new file mode 100644
index 000000000000..bb7e8f7facaf
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations.
+ */
+
+/ {
+	interrupt-parent = <&intc>;
+
+	soc {
+		dma: dma@7e007000 {
+			compatible = "brcm,bcm2835-dma";
+			reg = <0x7e007000 0xf00>;
+			interrupts = <1 16>,
+				     <1 17>,
+				     <1 18>,
+				     <1 19>,
+				     <1 20>,
+				     <1 21>,
+				     <1 22>,
+				     <1 23>,
+				     <1 24>,
+				     <1 25>,
+				     <1 26>,
+				     /* dma channel 11-14 share one irq */
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     <1 27>,
+				     /* unused shared irq for all channels */
+				     <1 28>;
+			interrupt-names = "dma0",
+					  "dma1",
+					  "dma2",
+					  "dma3",
+					  "dma4",
+					  "dma5",
+					  "dma6",
+					  "dma7",
+					  "dma8",
+					  "dma9",
+					  "dma10",
+					  "dma11",
+					  "dma12",
+					  "dma13",
+					  "dma14",
+					  "dma-shared-all";
+			#dma-cells = <1>;
+			brcm,dma-channel-mask = <0x7f35>;
+		};
+
+		intc: interrupt-controller@7e00b200 {
+			compatible = "brcm,bcm2835-armctrl-ic";
+			reg = <0x7e00b200 0x200>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pm: watchdog@7e100000 {
+			compatible = "brcm,bcm2835-pm", "brcm,bcm2835-pm-wdt";
+			#power-domain-cells = <1>;
+			#reset-cells = <1>;
+			reg = <0x7e100000 0x114>,
+			      <0x7e00a000 0x24>;
+			reg-names = "pm", "asb";
+			clocks = <&clocks BCM2835_CLOCK_V3D>,
+				 <&clocks BCM2835_CLOCK_PERI_IMAGE>,
+				 <&clocks BCM2835_CLOCK_H264>,
+				 <&clocks BCM2835_CLOCK_ISP>;
+			clock-names = "v3d", "peri_image", "h264", "isp";
+			system-power-controller;
+		};
+
+		rng@7e104000 {
+			compatible = "brcm,bcm2835-rng";
+			reg = <0x7e104000 0x10>;
+			interrupts = <2 29>;
+		};
+
+		pixelvalve@7e206000 {
+			compatible = "brcm,bcm2835-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <2 13>; /* pwa0 */
+		};
+
+		pixelvalve@7e207000 {
+			compatible = "brcm,bcm2835-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <2 14>; /* pwa1 */
+		};
+
+		thermal: thermal@7e212000 {
+			compatible = "brcm,bcm2835-thermal";
+			reg = <0x7e212000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_TSENS>;
+			#thermal-sensor-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7e805000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e805000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "okay";
+		};
+
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
+		pixelvalve@7e807000 {
+			compatible = "brcm,bcm2835-pixelvalve2";
+			reg = <0x7e807000 0x100>;
+			interrupts = <2 10>; /* pixelvalve */
+		};
+
+		hdmi: hdmi@7e902000 {
+			compatible = "brcm,bcm2835-hdmi";
+			reg = <0x7e902000 0x600>,
+			      <0x7e808000 0x100>;
+			interrupts = <2 8>, <2 9>;
+			ddc = <&i2c2>;
+			clocks = <&clocks BCM2835_PLLH_PIX>,
+				 <&clocks BCM2835_CLOCK_HSM>;
+			clock-names = "pixel", "hdmi";
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		v3d: v3d@7ec00000 {
+			compatible = "brcm,bcm2835-v3d";
+			reg = <0x7ec00000 0x1000>;
+			interrupts = <1 10>;
+		};
+
+		vc4: gpu {
+			compatible = "brcm,bcm2835-vc4";
+		};
+	};
+};
+
+&cpu_thermal {
+	thermal-sensors = <&thermal>;
+};
+
+&gpio {
+	i2c_slave_gpio18: i2c-slave-gpio18 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT3>;
+	};
+
+	jtag_gpio4: jtag-gpio4 {
+		brcm,pins = <4 5 6 12 13>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+
+	pwm0_gpio12: pwm0-gpio12 {
+		brcm,pins = <12>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm0_gpio18: pwm0-gpio18 {
+		brcm,pins = <18>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm0_gpio40: pwm0-gpio40 {
+		brcm,pins = <40>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio13: pwm1-gpio13 {
+		brcm,pins = <13>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio19: pwm1-gpio19 {
+		brcm,pins = <19>;
+		brcm,function = <BCM2835_FSEL_ALT5>;
+	};
+	pwm1_gpio41: pwm1-gpio41 {
+		brcm,pins = <41>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+	pwm1_gpio45: pwm1-gpio45 {
+		brcm,pins = <45>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&i2s {
+	dmas = <&dma 2>, <&dma 3>;
+	dma-names = "tx", "rx";
+};
+
+&sdhost {
+	dmas = <&dma 13>;
+	dma-names = "rx-tx";
+};
+
+&spi {
+	dmas = <&dma 6>, <&dma 7>;
+	dma-names = "tx", "rx";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
new file mode 100644
index 000000000000..02ce817868ba
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
+	model = "Raspberry Pi Model A+";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the unreleased schematic for the Model A+.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts
new file mode 100644
index 000000000000..3fdf60eb11dc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-a", "brcm,bcm2835";
+	model = "Raspberry Pi Model A";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "CAM_GPIO0",
+			  /* Binary number representing build/revision */
+			  "CONFIG0",
+			  "CONFIG1",
+			  "CONFIG2",
+			  "CONFIG3",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
index 668442b1bda5..9956fd06a4b6 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
@@ -1,26 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
+#include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
 	model = "Raspberry Pi Model B+";
 
-	leds {
-		act {
-			gpios = <&gpio 47 0>;
-		};
-
-		pwr {
-			label = "PWR";
-			gpios = <&gpio 35 0>;
-			default-state = "keep";
-			linux,default-trigger = "default-on";
-		};
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
 	};
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-B-Plus-V1.2-Schematics.pdf
+	 * RPI-BPLUS sheet 1
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "ETH_CLK", /* GPIO44 */
+			  "PWM1_OUT", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
 
 	/* I2S interface */
 	i2s_alt0: i2s_alt0 {
@@ -28,3 +91,41 @@
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
 };
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
new file mode 100644
index 000000000000..4e1770afb145
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835";
+	model = "Raspberry Pi Model B rev2";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from Raspberry-Pi-Rev-2.0-Model-AB-Schematics.pdf
+	 * RPI00022 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_CLK",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt2>;
+
+	/* I2S interface */
+	i2s_alt2: i2s_alt2 {
+		brcm,pins = <28 29 30 31>;
+		brcm,function = <BCM2835_FSEL_ALT2>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts
index ee89b79426cf..eec1d0892d33 100644
--- a/arch/arm/boot/dts/bcm2835-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts
@@ -1,23 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
+#include "bcm2835.dtsi"
 #include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9512.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
 
 / {
 	compatible = "raspberrypi,model-b", "brcm,bcm2835";
 	model = "Raspberry Pi Model B";
 
-	leds {
-		act {
-			gpios = <&gpio 16 1>;
-		};
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x10000000>;
 	};
 };
 
 &gpio {
-	pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
+	/*
+	 * Taken from Raspberry-Pi-Rev-1.0-Model-AB-Schematics.pdf
+	 * RPI00021 sheet 02
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "SDA0",
+			  "SCL0",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "CAM_GPIO1",
+			  "LAN_RUN",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "", /* GPIO12 */
+			  "", /* GPIO13 */
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "STATUS_LED_N",
+			  "GPIO17",
+			  "GPIO18",
+			  "", /* GPIO19 */
+			  "", /* GPIO20 */
+			  "CAM_GPIO0",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "", /* GPIO26 */
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "PWM1_OUT",
+			  "HDMI_HPD_P",
+			  "SD_CARD_DET",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
 
-	/* I2S interface */
-	i2s_alt2: i2s_alt2 {
-		brcm,pins = <28 29 30 31>;
-		brcm,function = <BCM2835_FSEL_ALT2>;
-	};
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
new file mode 100644
index 000000000000..87958a96c3e0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835-rpi-cm1.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,compute-module", "brcm,bcm2835";
+	model = "Raspberry Pi Compute Module IO board rev1";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "HDMI_HPD_N",
+			  /* Also used as ACT LED */
+			  "EMMC_EN_N",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
new file mode 100644
index 000000000000..750cd76948e3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+
+/ {
+	leds {
+		led-act {
+			gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhost {
+	non-removable;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..4e7b4a592da7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&firmware {
+	firmware_clocks: clocks {
+		compatible = "raspberrypi,firmware-clocks";
+		#clock-cells = <1>;
+	};
+};
+
+&hdmi {
+	clocks = <&firmware_clocks 9>,
+		 <&firmware_clocks 13>;
+	clock-names = "pixel", "hdmi";
+};
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
+
+&vec {
+	clocks = <&firmware_clocks 15>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
new file mode 100644
index 000000000000..dbf825985ec0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero-w.dts
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
+	model = "Raspberry Pi Zero W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "CAM_GPIO1", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "CAM_GPIO0", /* GPIO44 */
+			  "BT_ON", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
new file mode 100644
index 000000000000..f80e65a825fd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2835.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero", "brcm,bcm2835";
+	model = "Raspberry Pi Zero";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "", /* GPIO31 */
+			  "CAM_GPIO1", /* GPIO32 */
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "", /* GPIO35 */
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "", /* GPIO38 */
+			  "", /* GPIO39 */
+			  "", /* GPIO40 */
+			  "CAM_GPIO0", /* GPIO41 */
+			  "", /* GPIO42 */
+			  "", /* GPIO43 */
+			  "", /* GPIO44 */
+			  "", /* GPIO45 */
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 46780bb48bbf..ee9ee9d1fe65 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,17 +1,26 @@
-#include "bcm2835.dtsi"
+#include <dt-bindings/power/raspberrypi-power.h>
 
 / {
-	memory {
-		reg = <0 0x10000000>;
-	};
+	soc {
+		firmware: firmware {
+			compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mboxes = <&mailbox>;
+			dma-ranges;
+		};
 
-	leds {
-		compatible = "gpio-leds";
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
 
-		act {
-			label = "ACT";
-			default-state = "keep";
-			linux,default-trigger = "heartbeat";
+		vchiq: mailbox@7e00b840 {
+			compatible = "brcm,bcm2835-vchiq";
+			reg = <0x7e00b840 0x3c>;
+			interrupts = <0 2>;
 		};
 	};
 };
@@ -25,27 +34,38 @@
 	};
 
 	alt0: alt0 {
-		brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
+		brcm,pins = <4 5 7 8 9 10 11>;
 		brcm,function = <BCM2835_FSEL_ALT0>;
 	};
-
-	alt3: alt3 {
-		brcm,pins = <48 49 50 51 52 53>;
-		brcm,function = <BCM2835_FSEL_ALT3>;
-	};
 };
 
 &i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_gpio0>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_gpio2>;
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
-&sdhci {
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
+
+&vec {
+	power-domains = <&power RPI_POWER_DOMAIN_VEC>;
 	status = "okay";
-	bus-width = <4>;
+};
+
+&dsi0 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI0>;
+};
+
+&dsi1 {
+	power-domains = <&power RPI_POWER_DOMAIN_DSI1>;
 };
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 301c73f4ca33..15cb331febbb 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,192 +1,54 @@
-#include <dt-bindings/pinctrl/bcm2835.h>
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
-	model = "BCM2835";
-	interrupt-parent = <&intc>;
 
-	chosen {
-		bootargs = "earlyprintk console=ttyAMA0";
-	};
-
-	soc {
-		compatible = "simple-bus";
+	cpus {
 		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x7e000000 0x20000000 0x02000000>;
-		dma-ranges = <0x40000000 0x00000000 0x20000000>;
-
-		timer@7e003000 {
-			compatible = "brcm,bcm2835-system-timer";
-			reg = <0x7e003000 0x1000>;
-			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
-			clock-frequency = <1000000>;
-		};
-
-		dma: dma@7e007000 {
-			compatible = "brcm,bcm2835-dma";
-			reg = <0x7e007000 0xf00>;
-			interrupts = <1 16>,
-				     <1 17>,
-				     <1 18>,
-				     <1 19>,
-				     <1 20>,
-				     <1 21>,
-				     <1 22>,
-				     <1 23>,
-				     <1 24>,
-				     <1 25>,
-				     <1 26>,
-				     <1 27>,
-				     <1 28>;
-
-			#dma-cells = <1>;
-			brcm,dma-channel-mask = <0x7f35>;
-		};
-
-		intc: interrupt-controller@7e00b200 {
-			compatible = "brcm,bcm2835-armctrl-ic";
-			reg = <0x7e00b200 0x200>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		watchdog@7e100000 {
-			compatible = "brcm,bcm2835-pm-wdt";
-			reg = <0x7e100000 0x28>;
-		};
-
-		rng@7e104000 {
-			compatible = "brcm,bcm2835-rng";
-			reg = <0x7e104000 0x10>;
-		};
-
-		mailbox: mailbox@7e00b800 {
-			compatible = "brcm,bcm2835-mbox";
-			reg = <0x7e00b880 0x40>;
-			interrupts = <0 1>;
-			#mbox-cells = <0>;
-		};
+		#size-cells = <0>;
 
-		gpio: gpio@7e200000 {
-			compatible = "brcm,bcm2835-gpio";
-			reg = <0x7e200000 0xb4>;
-			/*
-			 * The GPIO IP block is designed for 3 banks of GPIOs.
-			 * Each bank has a GPIO interrupt for itself.
-			 * There is an overall "any bank" interrupt.
-			 * In order, these are GIC interrupts 17, 18, 19, 20.
-			 * Since the BCM2835 only has 2 banks, the 2nd bank
-			 * interrupt output appears to be mirrored onto the
-			 * 3rd bank's interrupt signal.
-			 * So, a bank0 interrupt shows up on 17, 20, and
-			 * a bank1 interrupt shows up on 18, 19, 20!
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,arm1176jzf-s";
+			reg = <0x0>;
+			/* Source for d/i-cache-line-size and d/i-cache-sets
+			 * https://developer.arm.com/documentation/ddi0301
+			 * /h/level-one-memory-system/cache-organization?lang=en
+			 *
+			 * Source for d/i-cache-size
+			 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+			 *
+			 * NOTE: The BCM2835 has a L2 cache but it is dedicated to the GPU
+			 * It can be shared with the CPU through fw settings,
+			 * but this is not recommended.
 			 */
-			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart@7e201000 {
-			compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell";
-			reg = <0x7e201000 0x1000>;
-			interrupts = <2 25>;
-			clock-frequency = <3000000>;
-			arm,primecell-periphid = <0x00241011>;
-		};
-
-		i2s: i2s@7e203000 {
-			compatible = "brcm,bcm2835-i2s";
-			reg = <0x7e203000 0x20>,
-			      <0x7e101098 0x02>;
-
-			dmas = <&dma 2>,
-			       <&dma 3>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		spi: spi@7e204000 {
-			compatible = "brcm,bcm2835-spi";
-			reg = <0x7e204000 0x1000>;
-			interrupts = <2 22>;
-			clocks = <&clk_spi>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		i2c0: i2c@7e205000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e205000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sdhci: sdhci@7e300000 {
-			compatible = "brcm,bcm2835-sdhci";
-			reg = <0x7e300000 0x100>;
-			interrupts = <2 30>;
-			clocks = <&clk_mmc>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@7e804000 {
-			compatible = "brcm,bcm2835-i2c";
-			reg = <0x7e804000 0x1000>;
-			interrupts = <2 21>;
-			clocks = <&clk_i2c>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		usb@7e980000 {
-			compatible = "brcm,bcm2835-usb";
-			reg = <0x7e980000 0x10000>;
-			interrupts = <1 9>;
-		};
-
-		arm-pmu {
-			compatible = "arm,arm1176-pmu";
+			d-cache-size = <0x4000>;
+			d-cache-line-size = <16>;
+			d-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
+			i-cache-size = <0x4000>;
+			i-cache-line-size = <16>;
+			i-cache-sets = <256>; // 16KiB(size)/16(line-size)=1024ways/4-way set
 		};
 	};
 
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	soc {
+		ranges = <0x7e000000 0x20000000 0x02000000>;
+		dma-ranges = <0x40000000 0x00000000 0x20000000>;
+	};
 
-		clk_mmc: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "mmc";
-			clock-frequency = <100000000>;
-		};
+	arm-pmu {
+		compatible = "arm,arm1176-pmu";
+	};
+};
 
-		clk_i2c: clock@1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			#clock-cells = <0>;
-			clock-output-names = "i2c";
-			clock-frequency = <250000000>;
-		};
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
 
-		clk_spi: clock@2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			#clock-cells = <0>;
-			clock-output-names = "spi";
-			clock-frequency = <250000000>;
-		};
-	};
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2835-thermal";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
new file mode 100644
index 000000000000..6068ec390081
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2836.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
+	model = "Raspberry Pi 2 Model B";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_2b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "SDA0",
+			  "SCL0",
+			  "", /* GPIO30 */
+			  "LAN_RUN",
+			  "CAM_GPIO1",
+			  "", /* GPIO33 */
+			  "", /* GPIO34 */
+			  "PWR_LOW_N",
+			  "", /* GPIO36 */
+			  "", /* GPIO37 */
+			  "USB_LIMIT",
+			  "", /* GPIO39 */
+			  "PWM0_OUT",
+			  "CAM_GPIO0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  "ETH_CLK",
+			  "PWM1_OUT",
+			  "HDMI_HPD_N",
+			  "STATUS_LED",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
+
+	/* I2S interface */
+	i2s_alt0: i2s_alt0 {
+		brcm,pins = <18 19 20 21>;
+		brcm,function = <BCM2835_FSEL_ALT0>;
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2836-rpi.dtsi b/arch/arm/boot/dts/bcm2836-rpi.dtsi
new file mode 100644
index 000000000000..48b03b55ff56
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836-rpi.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm2835-rpi.dtsi"
+#include "bcm2835-rpi-common.dtsi"
+
+&vchiq {
+	compatible = "brcm,bcm2836-vchiq", "brcm,bcm2835-vchiq";
+};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
new file mode 100644
index 000000000000..783fe624ba68
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2836";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: interrupt-controller@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp";
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L1-Memory-System
+		 * /About-the-L1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+
+		v7_cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf00>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf01>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf02>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		v7_cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0xf03>;
+			clock-frequency = <800000000>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <32>;
+			i-cache-sets = <512>; // 32KiB(size)/32(line-size)=1024ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0464/f/L2-Memory-System
+		 * /About-the-L2-Memory-system?lang=en
+		 * Source for cache-size
+		 * https://forums.raspberrypi.com/viewtopic.php?t=98428
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>; // 512KiB(size)/64(line-size)=8192ways/8-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	407000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2836-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
new file mode 100644
index 000000000000..3548306dfbcb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model A+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "",
+				  "BT_WL_ON",
+				  "STATUS_LED_R",
+				  "",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * This is mostly based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "", /* GPIO42 */
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module
+ *
+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
+ * by a single GPIO. We can't give GPIO control to one of the drivers,
+ * otherwise the other part would get unexpectedly disturbed.
+ */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
new file mode 100644
index 000000000000..2f1800cbc522
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-lan7515.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B+";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "PWR_LED_R",
+				  "LAN_RUN",
+				  "",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3bplus_1p0_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_G",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETH_CLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+};
+
+&leds {
+	led-pwr {
+		label = "PWR";
+		gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
+		default-state = "keep";
+		linux,default-trigger = "default-on";
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
new file mode 100644
index 000000000000..61270340075c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+	model = "Raspberry Pi 3 Model B";
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+};
+
+&bt {
+	shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "BT_ON",
+				  "WL_ON",
+				  "STATUS_LED",
+				  "LAN_RUN",
+				  "HDMI_HPD_N",
+				  "CAM_GPIO0",
+				  "CAM_GPIO1",
+				  "PWR_LOW_N";
+		status = "okay";
+	};
+};
+
+&gpio {
+	/*
+	 * Taken from rpi_SCH_3b_1p2_reduced.pdf and
+	 * the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD1",
+			  "RXD1",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "", /* GPIO 28 */
+			  "LAN_RUN_BOOT",
+			  /* Used by BT module */
+			  "CTS0",
+			  "RTS0",
+			  "TXD0",
+			  "RXD0",
+			  /* Used by Wifi */
+			  "SD1_CLK",
+			  "SD1_CMD",
+			  "SD1_DATA0",
+			  "SD1_DATA1",
+			  "SD1_DATA2",
+			  "SD1_DATA3",
+			  "PWM0_OUT",
+			  "PWM1_OUT",
+			  "ETH_CLK",
+			  "WIFI_CLK",
+			  "SDA0",
+			  "SCL0",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
+};
+
+/* uart1 is mapped to the pin header */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+/* SDHOST is used to drive the SD card */
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	status = "okay";
+	bus-width = <4>;
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
new file mode 100644
index 000000000000..cf84e69fced8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3-io3.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837-rpi-cm3.dtsi"
+#include "bcm283x-rpi-usb-host.dtsi"
+
+/ {
+	compatible = "raspberrypi,3-compute-module", "brcm,bcm2837";
+	model = "Raspberry Pi Compute Module 3 IO board V3.0";
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "GPIO0",
+			  "GPIO1",
+			  "GPIO2",
+			  "GPIO3",
+			  "GPIO4",
+			  "GPIO5",
+			  "GPIO6",
+			  "GPIO7",
+			  "GPIO8",
+			  "GPIO9",
+			  "GPIO10",
+			  "GPIO11",
+			  "GPIO12",
+			  "GPIO13",
+			  "GPIO14",
+			  "GPIO15",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "GPIO28",
+			  "GPIO29",
+			  "GPIO30",
+			  "GPIO31",
+			  "GPIO32",
+			  "GPIO33",
+			  "GPIO34",
+			  "GPIO35",
+			  "GPIO36",
+			  "GPIO37",
+			  "GPIO38",
+			  "GPIO39",
+			  "GPIO40",
+			  "GPIO41",
+			  "GPIO42",
+			  "GPIO43",
+			  "GPIO44",
+			  "GPIO45",
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by eMMC */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio14>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
new file mode 100644
index 000000000000..1e4e4946b6b6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-cm3.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x40000000>;
+	};
+
+	reg_3v3: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1v8: fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};
+
+&firmware {
+	expgpio: gpio {
+		compatible = "raspberrypi,firmware-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "HDMI_HPD_N",
+				  "EMMC_EN_N",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "",
+				  "";
+		status = "okay";
+	};
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3v3>;
+	vqmmc-supply = <&reg_1v8>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
new file mode 100644
index 000000000000..b9cc4594398b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-zero-2-w.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2022 Stefan Wahren <stefan.wahren@i2se.com>
+ */
+
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2836-rpi.dtsi"
+#include "bcm283x-rpi-led-deprecated.dtsi"
+#include "bcm283x-rpi-usb-otg.dtsi"
+#include "bcm283x-rpi-wifi-bt.dtsi"
+
+/ {
+	compatible = "raspberrypi,model-zero-2-w", "brcm,bcm2837";
+	model = "Raspberry Pi Zero 2 W";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0 0x20000000>;
+	};
+
+	chosen {
+		/* 8250 auxiliary UART instead of pl011 */
+		stdout-path = "serial1:115200n8";
+	};
+};
+
+&bt {
+	shutdown-gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
+};
+
+&gpio {
+	/*
+	 * This is based on the official GPU firmware DT blob.
+	 *
+	 * Legend:
+	 * "NC" = not connected (no rail from the SoC)
+	 * "FOO" = GPIO line named "FOO" on the schematic
+	 * "FOO_N" = GPIO line named "FOO" on schematic, active low
+	 */
+	gpio-line-names = "ID_SDA",
+			  "ID_SCL",
+			  "SDA1",
+			  "SCL1",
+			  "GPIO_GCLK",
+			  "GPIO5",
+			  "GPIO6",
+			  "SPI_CE1_N",
+			  "SPI_CE0_N",
+			  "SPI_MISO",
+			  "SPI_MOSI",
+			  "SPI_SCLK",
+			  "GPIO12",
+			  "GPIO13",
+			  /* Serial port */
+			  "TXD0",
+			  "RXD0",
+			  "GPIO16",
+			  "GPIO17",
+			  "GPIO18",
+			  "GPIO19",
+			  "GPIO20",
+			  "GPIO21",
+			  "GPIO22",
+			  "GPIO23",
+			  "GPIO24",
+			  "GPIO25",
+			  "GPIO26",
+			  "GPIO27",
+			  "HDMI_HPD_N",
+			  "STATUS_LED_N",
+			  "NC", /* GPIO30 */
+			  "NC", /* GPIO31 */
+			  "NC", /* GPIO32 */
+			  "NC", /* GPIO33 */
+			  "NC", /* GPIO34 */
+			  "NC", /* GPIO35 */
+			  "NC", /* GPIO36 */
+			  "NC", /* GPIO37 */
+			  "NC", /* GPIO38 */
+			  "NC", /* GPIO39 */
+			  "CAM_GPIO0", /* GPIO40 */
+			  "WL_ON", /* GPIO41 */
+			  "BT_ON", /* GPIO42 */
+			  "WIFI_CLK", /* GPIO43 */
+			  "SDA0", /* GPIO44 */
+			  "SCL0", /* GPIO45 */
+			  "SMPS_SCL",
+			  "SMPS_SDA",
+			  /* Used by SD Card */
+			  "SD_CLK_R",
+			  "SD_CMD_R",
+			  "SD_DATA0_R",
+			  "SD_DATA1_R",
+			  "SD_DATA2_R",
+			  "SD_DATA3_R";
+
+	pinctrl-0 = <&gpioout &alt0>;
+};
+
+&hdmi {
+	hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
+	power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
+	status = "okay";
+};
+
+&led_act {
+	gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
+};
+
+&sdhost {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdhost_gpio48>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_gpio14>;
+	status = "okay";
+};
+
+&wifi_pwrseq {
+	reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
new file mode 100644
index 000000000000..84c08b46519d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -0,0 +1,144 @@
+#include "bcm283x.dtsi"
+#include "bcm2835-common.dtsi"
+
+/ {
+	compatible = "brcm,bcm2837";
+
+	soc {
+		ranges = <0x7e000000 0x3f000000 0x1000000>,
+			 <0x40000000 0x40000000 0x00001000>;
+		dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+		local_intc: local_intc@40000000 {
+			compatible = "brcm,bcm2836-l1-intc";
+			reg = <0x40000000 0x100>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&local_intc>;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupt-parent = <&local_intc>;
+		interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupt-parent = <&local_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, // PHYS_SECURE_PPI
+			     <1 IRQ_TYPE_LEVEL_HIGH>, // PHYS_NONSECURE_PPI
+			     <3 IRQ_TYPE_LEVEL_HIGH>, // VIRT_PPI
+			     <2 IRQ_TYPE_LEVEL_HIGH>; // HYP_PPI
+		always-on;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+
+		/* Source for d/i-cache-line-size and d/i-cache-sets
+		 * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system
+		 * /about-the-l1-memory-system?lang=en
+		 *
+		 * Source for d/i-cache-size
+		 * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks
+		 */
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000d8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000e8>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0x0 0x000000f0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set
+			next-level-cache = <&l2>;
+		};
+
+		/* Source for cache-line-size + cache-sets
+		 * https://developer.arm.com/documentation/ddi0500
+		 * /e/level-2-memory-system/about-the-l2-memory-system?lang=en
+		 * Source for cache-size
+		 * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf
+		 */
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set
+			cache-level = <2>;
+		};
+	};
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+	compatible = "brcm,bcm2836-armctrl-ic";
+	reg = <0x7e00b200 0x200>;
+	interrupt-parent = <&local_intc>;
+	interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&cpu_thermal {
+	coefficients = <(-538)	412000>;
+};
+
+/* enable thermal sensor with the correct compatible property set */
+&thermal {
+	compatible = "brcm,bcm2837-thermal";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
new file mode 100644
index 000000000000..70bece63f9a7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-lan7515.dtsi
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/net/microchip-lan78xx.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb-port@1 {
+		compatible = "usb424,2514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb-port@1 {
+			compatible = "usb424,2514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,7800";
+				reg = <1>;
+
+				mdio {
+					#address-cells = <0x1>;
+					#size-cells = <0x0>;
+					eth_phy: ethernet-phy@1 {
+						reg = <1>;
+						microchip,led-modes = <
+							LAN78XX_LINK_1000_ACTIVITY
+							LAN78XX_LINK_10_100_ACTIVITY
+						>;
+					};
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
new file mode 100644
index 000000000000..f83e56de1a72
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-led-deprecated.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	/*
+	 * This file provides the now deprecated ACT LED to the
+	 * Raspberry Pi boards. Please don't include this file
+	 * for new boards!
+	 */
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led_act: led-act {
+			label = "ACT";
+			default-state = "keep";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
new file mode 100644
index 000000000000..882b13807075
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9512";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
new file mode 100644
index 000000000000..4273b90b53cc
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi
@@ -0,0 +1,19 @@
+/ {
+	aliases {
+		ethernet0 = &ethernet;
+	};
+};
+
+&usb {
+	usb1@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
new file mode 100644
index 000000000000..73f4ece8dcd0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi
@@ -0,0 +1,3 @@
+&usb {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
new file mode 100644
index 000000000000..e2fd9610e125
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-otg.dtsi
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "otg";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	/*
+	 * According to dwc2 the sum of all device EP
+	 * fifo sizes shouldn't exceed 3776 bytes.
+	 */
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
new file mode 100644
index 000000000000..0ff0e9e25327
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-usb-peripheral.dtsi
@@ -0,0 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0
+&usb {
+	dr_mode = "peripheral";
+	g-rx-fifo-size = <256>;
+	g-np-tx-fifo-size = <32>;
+	g-tx-fifo-size = <256 256 512 512 512 768 768>;
+};
diff --git a/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
new file mode 100644
index 000000000000..0b64cc19941f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/ {
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+	};
+};
+
+/* SDHCI is used to control the SDIO for wireless */
+&sdhci {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_gpio34>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* uart0 communicates with the BT module */
+&uart0 {
+	status = "okay";
+
+	bt: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <2000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
new file mode 100644
index 000000000000..c9c52a19ef3b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -0,0 +1,501 @@
+#include <dt-bindings/pinctrl/bcm2835.h>
+#include <dt-bindings/clock/bcm2835.h>
+#include <dt-bindings/clock/bcm2835-aux.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/soc/bcm2835-pm.h>
+
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
+/* This include file covers the common peripherals and configuration between
+ * bcm2835 and bcm2836 implementations, leaving the CPU configuration to
+ * bcm2835.dtsi and bcm2836.dtsi.
+ */
+
+/ {
+	compatible = "brcm,bcm2835";
+	model = "BCM2835";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	rmem: reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		cma: linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x4000000>; /* 64MB */
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+
+			trips {
+				cpu-crit {
+					temperature = <90000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		system_timer: timer@7e003000 {
+			compatible = "brcm,bcm2835-system-timer";
+			reg = <0x7e003000 0x1000>;
+			interrupts = <1 0>, <1 1>, <1 2>, <1 3>;
+			/* This could be a reference to BCM2835_CLOCK_TIMER,
+			 * but we don't have the driver using the common clock
+			 * support yet.
+			 */
+			clock-frequency = <1000000>;
+		};
+
+		txp: txp@7e004000 {
+			compatible = "brcm,bcm2835-txp";
+			reg = <0x7e004000 0x20>;
+			interrupts = <1 11>;
+		};
+
+		clocks: cprman@7e101000 {
+			compatible = "brcm,bcm2835-cprman";
+			#clock-cells = <1>;
+			reg = <0x7e101000 0x2000>;
+
+			/* CPRMAN derives almost everything from the
+			 * platform's oscillator.  However, the DSI
+			 * pixel clocks come from the DSI analog PHY.
+			 */
+			clocks = <&clk_osc>,
+				<&dsi0 0>, <&dsi0 1>, <&dsi0 2>,
+				<&dsi1 0>, <&dsi1 1>, <&dsi1 2>;
+		};
+
+		mailbox: mailbox@7e00b880 {
+			compatible = "brcm,bcm2835-mbox";
+			reg = <0x7e00b880 0x40>;
+			interrupts = <0 1>;
+			#mbox-cells = <0>;
+		};
+
+		gpio: gpio@7e200000 {
+			compatible = "brcm,bcm2835-gpio";
+			reg = <0x7e200000 0xb4>;
+			/*
+			 * The GPIO IP block is designed for 3 banks of GPIOs.
+			 * Each bank has a GPIO interrupt for itself.
+			 * There is an overall "any bank" interrupt.
+			 * In order, these are GIC interrupts 17, 18, 19, 20.
+			 * Since the BCM2835 only has 2 banks, the 2nd bank
+			 * interrupt output appears to be mirrored onto the
+			 * 3rd bank's interrupt signal.
+			 * So, a bank0 interrupt shows up on 17, 20, and
+			 * a bank1 interrupt shows up on 18, 19, 20!
+			 */
+			interrupts = <2 17>, <2 18>, <2 19>, <2 20>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			gpio-ranges = <&gpio 0 0 54>;
+
+			/* Defines common pin muxing groups
+			 *
+			 * While each pin can have its mux selected
+			 * for various functions individually, some
+			 * groups only make sense to switch to a
+			 * particular function together.
+			 */
+			dpi_gpio0: dpi-gpio0 {
+				brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
+					     12 13 14 15 16 17 18 19
+					     20 21 22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			emmc_gpio22: emmc-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			emmc_gpio34: emmc-gpio34 {
+				brcm,pins = <34 35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP
+					     BCM2835_PUD_UP>;
+			};
+			emmc_gpio48: emmc-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+
+			gpclk0_gpio4: gpclk0-gpio4 {
+				brcm,pins = <4>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio5: gpclk1-gpio5 {
+				brcm,pins = <5>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio42: gpclk1-gpio42 {
+				brcm,pins = <42>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk1_gpio44: gpclk1-gpio44 {
+				brcm,pins = <44>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio6: gpclk2-gpio6 {
+				brcm,pins = <6>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			gpclk2_gpio43: gpclk2-gpio43 {
+				brcm,pins = <43>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+				brcm,pull = <BCM2835_PUD_OFF>;
+			};
+
+			i2c0_gpio0: i2c0-gpio0 {
+				brcm,pins = <0 1>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio28: i2c0-gpio28 {
+				brcm,pins = <28 29>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c0_gpio44: i2c0-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT1>;
+			};
+			i2c1_gpio2: i2c1-gpio2 {
+				brcm,pins = <2 3>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			i2c1_gpio44: i2c1-gpio44 {
+				brcm,pins = <44 45>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			jtag_gpio22: jtag-gpio22 {
+				brcm,pins = <22 23 24 25 26 27>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			pcm_gpio18: pcm-gpio18 {
+				brcm,pins = <18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			pcm_gpio28: pcm-gpio28 {
+				brcm,pins = <28 29 30 31>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			sdhost_gpio48: sdhost-gpio48 {
+				brcm,pins = <48 49 50 51 52 53>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+
+			spi0_gpio7: spi0-gpio7 {
+				brcm,pins = <7 8 9 10 11>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi0_gpio35: spi0-gpio35 {
+				brcm,pins = <35 36 37 38 39>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			spi1_gpio16: spi1-gpio16 {
+				brcm,pins = <16 17 18 19 20 21>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+			spi2_gpio40: spi2-gpio40 {
+				brcm,pins = <40 41 42 43 44 45>;
+				brcm,function = <BCM2835_FSEL_ALT4>;
+			};
+
+			uart0_gpio14: uart0-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT0>;
+			};
+			/* Separate from the uart0_gpio14 group
+			 * because it conflicts with spi1_gpio16, and
+			 * people often run uart0 on the two pins
+			 * without flow control.
+			 */
+			uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+			};
+			uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
+			};
+			uart0_gpio32: uart0-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT3>;
+				brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
+			};
+			uart0_gpio36: uart0-gpio36 {
+				brcm,pins = <36 37>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+			uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
+				brcm,pins = <38 39>;
+				brcm,function = <BCM2835_FSEL_ALT2>;
+			};
+
+			uart1_gpio14: uart1-gpio14 {
+				brcm,pins = <14 15>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
+				brcm,pins = <16 17>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio32: uart1-gpio32 {
+				brcm,pins = <32 33>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
+				brcm,pins = <30 31>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_gpio40: uart1-gpio40 {
+				brcm,pins = <40 41>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+			uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
+				brcm,pins = <42 43>;
+				brcm,function = <BCM2835_FSEL_ALT5>;
+			};
+		};
+
+		uart0: serial@7e201000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x7e201000 0x200>;
+			interrupts = <2 25>;
+			clocks = <&clocks BCM2835_CLOCK_UART>,
+				 <&clocks BCM2835_CLOCK_VPU>;
+			clock-names = "uartclk", "apb_pclk";
+			arm,primecell-periphid = <0x00241011>;
+		};
+
+		sdhost: mmc@7e202000 {
+			compatible = "brcm,bcm2835-sdhost";
+			reg = <0x7e202000 0x100>;
+			interrupts = <2 24>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			status = "disabled";
+		};
+
+		i2s: i2s@7e203000 {
+			compatible = "brcm,bcm2835-i2s";
+			reg = <0x7e203000 0x24>;
+			clocks = <&clocks BCM2835_CLOCK_PCM>;
+			status = "disabled";
+		};
+
+		spi: spi@7e204000 {
+			compatible = "brcm,bcm2835-spi";
+			reg = <0x7e204000 0x200>;
+			interrupts = <2 22>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@7e205000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e205000 0x200>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		dpi: dpi@7e208000 {
+			compatible = "brcm,bcm2835-dpi";
+			reg = <0x7e208000 0x8c>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>,
+				 <&clocks BCM2835_CLOCK_DPI>;
+			clock-names = "core", "pixel";
+			status = "disabled";
+		};
+
+		dsi0: dsi@7e209000 {
+			compatible = "brcm,bcm2835-dsi0";
+			reg = <0x7e209000 0x78>;
+			interrupts = <2 4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLA_DSI0>,
+				 <&clocks BCM2835_CLOCK_DSI0E>,
+				 <&clocks BCM2835_CLOCK_DSI0P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi0_byte",
+					     "dsi0_ddr2",
+					     "dsi0_ddr";
+
+			status = "disabled";
+		};
+
+		aux: aux@7e215000 {
+			compatible = "brcm,bcm2835-aux";
+			#clock-cells = <1>;
+			reg = <0x7e215000 0x8>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+		};
+
+		uart1: serial@7e215040 {
+			compatible = "brcm,bcm2835-aux-uart";
+			reg = <0x7e215040 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+			status = "disabled";
+		};
+
+		spi1: spi@7e215080 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e215080 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@7e2150c0 {
+			compatible = "brcm,bcm2835-aux-spi";
+			reg = <0x7e2150c0 0x40>;
+			interrupts = <1 29>;
+			clocks = <&aux BCM2835_AUX_CLOCK_SPI2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		pwm: pwm@7e20c000 {
+			compatible = "brcm,bcm2835-pwm";
+			reg = <0x7e20c000 0x28>;
+			clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clocks = <&clocks BCM2835_CLOCK_PWM>;
+			assigned-clock-rates = <10000000>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		sdhci: mmc@7e300000 {
+			compatible = "brcm,bcm2835-sdhci";
+			reg = <0x7e300000 0x100>;
+			interrupts = <2 30>;
+			clocks = <&clocks BCM2835_CLOCK_EMMC>;
+			status = "disabled";
+		};
+
+		hvs@7e400000 {
+			compatible = "brcm,bcm2835-hvs";
+			reg = <0x7e400000 0x6000>;
+			interrupts = <2 1>;
+		};
+
+		dsi1: dsi@7e700000 {
+			compatible = "brcm,bcm2835-dsi1";
+			reg = <0x7e700000 0x8c>;
+			interrupts = <2 12>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#clock-cells = <1>;
+
+			clocks = <&clocks BCM2835_PLLD_DSI1>,
+				 <&clocks BCM2835_CLOCK_DSI1E>,
+				 <&clocks BCM2835_CLOCK_DSI1P>;
+			clock-names = "phy", "escape", "pixel";
+
+			clock-output-names = "dsi1_byte",
+					     "dsi1_ddr2",
+					     "dsi1_ddr";
+
+			status = "disabled";
+		};
+
+		i2c1: i2c@7e804000 {
+			compatible = "brcm,bcm2835-i2c";
+			reg = <0x7e804000 0x1000>;
+			interrupts = <2 21>;
+			clocks = <&clocks BCM2835_CLOCK_VPU>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usb: usb@7e980000 {
+			compatible = "brcm,bcm2835-usb";
+			reg = <0x7e980000 0x10000>;
+			interrupts = <1 9>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clk_usb>;
+			clock-names = "otg";
+			phys = <&usbphy>;
+			phy-names = "usb2-phy";
+		};
+	};
+
+	clocks {
+		/* The oscillator is the root of the clock tree. */
+		clk_osc: clk-osc {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "osc";
+			clock-frequency = <19200000>;
+		};
+
+		clk_usb: clk-usb {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "otg";
+			clock-frequency = <480000000>;
+		};
+	};
+
+	usbphy: phy {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
index 112a5a834ddc..c80ac16ad949 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-AC56U
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -20,78 +19,76 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		all {
+		led-all {
 			label = "bcm53xx:blue:all";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:blue:2ghz";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
index 3600f56f46f4..3fe17bd7b86d 100644
--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
+++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-AC68U
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -20,65 +19,67 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		brightness {
+		button-brightness {
 			label = "Backlight";
 			linux,code = <KEY_BRIGHTNESS_ZERO>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
new file mode 100644
index 000000000000..e583b9cbf07c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1166DHP and WZR-1166DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			/* label = "bcm53xx:blue:usb"; */
+			function = LED_FUNCTION_USB;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power0 {
+			/* label = "bcm53xx:red:power"; */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			/* label = "bcm53xx:white:power"; */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router0 {
+			/*  label = "bcm53xx:blue:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			/* label = "bcm53xx:amber:router"; */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			/* label = "bcm53xx:blue:wan"; */
+			function = LED_FUNCTION_WAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			/* label = "bcm53xx:blue:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			/* label = "bcm53xx:amber:wireless"; */
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-aoss {
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Commit mode set by switch? */
+		button-mode {
+			label = "Mode";
+			linux,code = <KEY_SETUP>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: AP mode */
+		button-sw-ap {
+			label = "AP";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-eject {
+			label = "USB eject";
+			linux,code = <KEY_EJECTCD>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
new file mode 100644
index 000000000000..8e506269fa1a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
new file mode 100644
index 000000000000..596129027074
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp2.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindigs for Buffalo WZR-1166DHP2
+ *
+ * Copyright (C) 2022 SHIMAMOTO Takayoshi <takayoshi.shimamoto.360@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708-buffalo-wzr-1166dhp-common.dtsi"
+
+/ {
+	compatible = "buffalo,wzr-1166dhp2", "brcm,bcm4708";
+	model = "Buffalo WZR-1166DHP2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
index 24f0ab59bf1b..43c698a0a7c3 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WZR-1750DHP
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -17,11 +16,13 @@
 	model = "Buffalo WZR-1750DHP (BCM4708)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	spi {
@@ -48,90 +49,103 @@
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>, <&ohci_port2>,
+					  <&ehci_port2>;
+			linux,default-trigger = "usbport";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:white:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:blue:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
new file mode 100644
index 000000000000..0ed25bf71f0d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6300-v1", "brcm,bcm4708";
+	model = "Linksys EA6300 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
new file mode 100644
index 000000000000..f1412ba83def
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea6500-v2", "brcm,bcm4708";
+	model = "Linksys EA6500 V2";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
new file mode 100644
index 000000000000..6de7fe204b0c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	compatible = "luxul,xap-1510v1", "brcm,bcm4708";
+	model = "Luxul XAP-1510 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
index f03939311717..f5b75ba93512 100644
--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Luxul XWC-1000
  *
  * Copyright 2014 Luxul Inc.
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -17,18 +16,25 @@
 	model = "Luxul XWC-1000 (BCM4708)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
+	memory@0 {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000>;
 	};
 
-	nand: nand@18028000 {
-		nandcs@0 {
-			partition@0 {
-				label = "ubi";
-				reg = <0x00000000 0x08000000>;
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "ubi";
+					reg = <0x00000000 0x08000000>;
+				};
 			};
 		};
 	};
@@ -36,7 +42,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		status {
+		led-status {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "timer";
@@ -45,13 +51,32 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
index 326ce8f4e49c..89155caf50be 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -17,78 +17,117 @@
 	model = "Netgear R6250 V1 (BCM4708)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
-	};
-
-	chipcommonA {
-		uart0: serial@0300 {
-			status = "okay";
-		};
-
-		uart1: serial@0400 {
-			status = "okay";
-		};
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
index 3a94606d042b..57d00a0b4765 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Netgear R6300 V2
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -20,65 +19,70 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		logo {
+		led-logo {
 			label = "bcm53xx:white:logo";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb {
+		led-usb {
 			label = "bcm53xx:blue:usb";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		wireless {
+		led-wireless {
 			label = "bcm53xx:blue:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index d6a033b97c70..26cdeb5cc337 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X arm platform code.
  * DTS for SmartRG SR400ac
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -17,104 +16,145 @@
 	model = "SmartRG SR400ac";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:white:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
 		};
 
-		usb3-white {
+		led-usb3-white {
 			label = "bcm53xx:white:usb3";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
-		usb3-green {
+		led-usb3-green {
 			label = "bcm53xx:green:usb3";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
 		};
 
-		wps {
+		led-wps {
 			label = "bcm53xx:white:wps";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		status-red {
+		led-status-red {
 			label = "bcm53xx:red:status";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		status-green {
+		led-status-green {
 			label = "bcm53xx:green:status";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		status-blue {
+		led-status-blue {
 			label = "bcm53xx:blue:status";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan-red {
+		led-wan-red {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4708.dtsi b/arch/arm/boot/dts/bcm4708.dtsi
index 31141e83fedd..1a19e97a987d 100644
--- a/arch/arm/boot/dts/bcm4708.dtsi
+++ b/arch/arm/boot/dts/bcm4708.dtsi
@@ -12,9 +12,18 @@
 / {
 	compatible = "brcm,bcm4708";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
+		enable-method = "brcm,bcm-nsp-smp";
 
 		cpu@0 {
 			device_type = "cpu";
@@ -27,8 +36,13 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			next-level-cache = <&L2>;
+			secondary-boot-reg = <0xffff0400>;
 			reg = <0x1>;
 		};
 	};
 
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
index 71b98cfaf944..3854db0118a9 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-N18U
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -20,59 +19,61 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb2 {
+		led-usb2 {
 			label = "bcm53xx:blue:usb2";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:blue:wan";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		lan {
+		led-lan {
 			label = "bcm53xx:blue:lan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		usb3 {
+		led-usb3 {
 			label = "bcm53xx:blue:usb3";
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
index bb0cb0bfafaf..407319cb5c0d 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WZR-600DHP2
  *
  * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -17,11 +16,13 @@
 	model = "Buffalo WZR-600DHP2 (BCM47081)";
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,115200 earlycon";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	spi {
@@ -48,77 +49,108 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power0 {
 			label = "bcm53xx:green:power";
 			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power1 {
 			label = "bcm53xx:red:power";
 			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		router0 {
+		led-router0 {
 			label = "bcm53xx:green:router";
 			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router1 {
+		led-router1 {
 			label = "bcm53xx:amber:router";
 			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:green:wan";
 			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		wireless0 {
+		led-wireless0 {
 			label = "bcm53xx:green:wireless";
 			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wireless1 {
+		led-wireless1 {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch device mode? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
index 184fd9214110..f8622ecce6a2 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WZR-900DHP
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
@@ -20,19 +19,91 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
-	gpio-keys {
-		compatible = "gpio-keys";
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 7 0>;
+		gpio-mosi = <&chipcommon 4 0>;
+		cs-gpios = <&chipcommon 6 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		restart {
+		hc595: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			reg = <0>;
+			registers-number = <1>;
+			spi-max-frequency = <100000>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&hc595 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			label = "bcm53xx:green:power";
+			gpios = <&hc595 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:red:power";
+			gpios = <&hc595 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			label = "bcm53xx:green:router";
+			gpios = <&hc595 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-router1 {
+			label = "bcm53xx:amber:router";
+			gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wireless0 {
+			label = "bcm53xx:green:wireless";
+			gpios = <&hc595 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless1 {
+			label = "bcm53xx:amber:wireless";
+			gpios = <&hc595 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
new file mode 100644
index 000000000000..76c9b30b868d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XAP-1410 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@4 {
+			reg = <4>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
new file mode 100644
index 000000000000..6ef0c0788e62
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
+	model = "Luxul XWR-1200 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-usb {
+			label = "bcm53xx:green:usb";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "none";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
new file mode 100644
index 000000000000..b6a5886698b2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+	compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708";
+	model = "TP-LINK Archer C5 V2";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan {
+			label = "bcm53xx:green:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2-port1 {
+			label = "bcm53xx:green:usb2-port1";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-green {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:green:wps";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb2-port2 {
+			label = "bcm53xx:green:usb2-port2";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
+
+		partition-os-image {
+			compatible = "brcm,trx";
+		};
+
+		partition-file-system {
+			linux,rootfs;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm47081.dtsi b/arch/arm/boot/dts/bcm47081.dtsi
index f720012ee5ed..ed13af028528 100644
--- a/arch/arm/boot/dts/bcm47081.dtsi
+++ b/arch/arm/boot/dts/bcm47081.dtsi
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for BCM47081 SoC.
  *
  * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include "bcm5301x.dtsi"
@@ -12,6 +11,14 @@
 / {
 	compatible = "brcm,bcm47081";
 
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -24,3 +31,7 @@
 		};
 	};
 };
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
index aedf3c426e1f..4f44cb4df704 100644
--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
+++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
@@ -1,15 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Asus RT-AC87U
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
 	compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708";
@@ -19,47 +19,80 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		wps {
+		led-wps {
 			label = "bcm53xx:blue:wps";
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		power {
+		led-power {
 			label = "bcm53xx:blue:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		wan {
+		led-wan {
 			label = "bcm53xx:red:wan";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		boot@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		nvram@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		firmware@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07cc0000>;
+			compatible = "brcm,trx";
+		};
+
+		asus@7ec0000 {
+			label = "asus";
+			reg = <0x07ec0000 0x00140000>;
+			read-only;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
index 2a92e8d5ab34..b7cd2faa30ce 100644
--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
@@ -1,15 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X ARM platform code.
  * DTS for Buffalo WXR-1900DHP
  *
  * Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
@@ -20,109 +19,114 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		usb {
+		led-usb {
 			label = "bcm53xx:green:usb";
 			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		power-amber {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		power-white {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
 
-		router-amber {
+		led-router-amber {
 			label = "bcm53xx:amber:router";
 			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		router-white {
+		led-router-white {
 			label = "bcm53xx:white:router";
 			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan-amber {
+		led-wan-amber {
 			label = "bcm53xx:amber:wan";
 			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wan-white {
+		led-wan-white {
 			label = "bcm53xx:white:wan";
 			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wireless-amber {
+		led-wireless-amber {
 			label = "bcm53xx:amber:wireless";
 			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 
-		wireless-white {
+		led-wireless-white {
 			label = "bcm53xx:white:wireless";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "default-off";
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		power {
+		button-power {
 			label = "Power";
 			linux,code = <KEY_POWER>;
 			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 		};
 
-		aoss {
+		button-aoss {
 			label = "AOSS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Commit mode set by switch? */
-		mode {
+		button-mode {
 			label = "Mode";
 			linux,code = <KEY_SETUP>;
 			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 		};
 
 		/* Switch: AP mode */
-		sw_ap {
+		button-sw-ap {
 			label = "AP";
 			linux,code = <BTN_0>;
 			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 
-		eject {
+		button-eject {
 			label = "USB eject";
 			linux,code = <KEY_EJECTCD>;
 			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
+
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
new file mode 100644
index 000000000000..99253fd7adb3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,ea9200", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Linksys EA9200";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x180000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
new file mode 100644
index 000000000000..24ba8f8f9bf3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R7000
+ *
+ * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708";
+	model = "Netgear R7000";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 446c586cd473..14303ab521ea 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -4,12 +4,22 @@
  *
  * Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
  *
- * Licensed under the GNU/GPL. See COPYING for details.
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
+ * REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
+ * AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
+ * INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
+ * LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
+ * OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+ * PERFORMANCE OF THIS SOFTWARE.
  */
 
 /dts-v1/;
 
-#include "bcm4708.dtsi"
+#include "bcm4709.dtsi"
 #include "bcm5301x-nand-cs0-bch8.dtsi"
 
 / {
@@ -20,59 +30,200 @@
 		bootargs = "console=ttyS0,115200";
 	};
 
-	memory {
-		reg = <0x00000000 0x08000000>;
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		led-power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		led-power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		5ghz-1 {
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
 		};
 
-		2ghz {
+		led-2ghz {
 			label = "bcm53xx:white:2ghz";
 			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "default-off";
+		};
+
+		led-wireless {
+			label = "bcm53xx:white:wireless";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
 		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		rfkill {
+		button-rfkill {
 			label = "WiFi";
 			linux,code = <KEY_RFKILL>;
 			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
 		};
 
-		wps {
+		button-wps {
 			label = "WPS";
 			linux,code = <KEY_WPS_BUTTON>;
 			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
 		};
 
-		restart {
+		button-restart {
 			label = "Reset";
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ieee80211-freq-limit = <5735000 5835000>;
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@1,0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		bridge@1,1,0 {
+			reg = <0x0000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			bridge@1,2,2 {
+				reg = <0x1000 0 0 0 0>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+
+				wifi@1,4,0 {
+					reg = <0x0000 0 0 0 0>;
+					ieee80211-freq-limit = <5170000 5730000>;
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
new file mode 100644
index 000000000000..5a8b2b1567e6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+
+/ {
+	compatible = "tplink,archer-c9-v1", "brcm,bcm4709", "brcm,bcm4708";
+	model = "TP-LINK Archer C9 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-lan {
+			label = "bcm53xx:blue:lan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:blue:usb3";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2 {
+			label = "bcm53xx:blue:usb2";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wan-blue {
+			label = "bcm53xx:blue:wan";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power {
+			label = "bcm53xx:blue:power";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+
+	partitions {
+		compatible = "tplink,safeloader-partitions";
+		partitions-table-offset = <0xe50000>;
+
+		partition-os-image {
+			compatible = "brcm,trx";
+		};
+
+		partition-file-system {
+			linux,rootfs;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm4709.dtsi b/arch/arm/boot/dts/bcm4709.dtsi
new file mode 100644
index 000000000000..cba3d910bed8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4709.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
new file mode 100644
index 000000000000..a50ff686b557
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2021-2022 Arınç ÜNAL <arinc.unal@arinc9.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Asus RT-AC88U";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x00180000>;
+
+		et1macaddr: et1macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "white:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-red {
+			label = "red:wan";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-lan {
+			label = "white:lan";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "white:usb2";
+			gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			label = "white:usb3";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ehci_port1>, <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "white:wps";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wifi {
+			label = "Wi-Fi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+
+		button-led {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	switch {
+		compatible = "realtek,rtl8365mb";
+		/* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
+		mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+		dsa,member = <1 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				phy-handle = <&ethphy0>;
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan6";
+				phy-handle = <&ethphy1>;
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan7";
+				phy-handle = <&ethphy2>;
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan8";
+				phy-handle = <&ethphy3>;
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				ethernet = <&sw0_p5>;
+				phy-mode = "rgmii";
+				tx-internal-delay-ps = <2000>;
+				rx-internal-delay-ps = <2100>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethphy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+
+			ethphy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+
+			ethphy2: ethernet-phy@2 {
+				reg = <2>;
+			};
+
+			ethphy3: ethernet-phy@3 {
+				reg = <3>;
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		sw0_p5: port@5 {
+			reg = <5>;
+			label = "extsw";
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+				pause;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+			ethernet = <&gmac2>;
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	status = "disabled";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x00080000 0x00180000>;
+		};
+
+		partition@200000 {
+			label = "firmware";
+			reg = <0x00200000 0x07e00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
new file mode 100644
index 000000000000..555fbe41dd8f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for D-Link DIR-885L
+ *
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-885l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-885L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nand_controller: nand-controller@18028000 {
+		nand@0 {
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "firmware";
+					reg = <0x00000000 0x08000000>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Switch: router / extender */
+		button-extender {
+			label = "Extender";
+			linux,code = <BTN_0>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
new file mode 100644
index 000000000000..d945a20b06e0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device tree for D-Link DIR-890L
+ * D-Link calls this board "WRGAC36"
+ * this router has the same looks and form factor as D-Link DIR-885L.
+ *
+ * Some differences from DIR-885L include a separate USB2 port, separate LEDs
+ * for USB2 and USB3, a separate VCC supply for the USB2 slot and no
+ * router/extender switch is mounted (there is an empty mount point on the
+ * PCB) so this device is a pure router. Also the LAN ports are in the right
+ * order.
+ *
+ * Based on the device tree for DIR-885L
+ * Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
+ * Copyright (C) 2022 Linus Walleij
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch1.dtsi"
+
+/ {
+	compatible = "dlink,dir-890l", "brcm,bcm47094", "brcm,bcm4708";
+	model = "D-Link DIR-890L";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		/*
+		 * LED information is derived from the boot log which
+		 * conveniently lists all the LEDs.
+		 */
+		compatible = "gpio-leds";
+
+		led-power-white {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-power-amber {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3-white {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb2-white {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:white:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Called "factory reset" in the vendor dmesg */
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
+	 * 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e1f0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e1f0000 0x00010000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+};
+
+&gmac2 {
+	/*
+	 * The NVRAM curiously does not contain a MAC address
+	 * for et2 so since that is the only ethernet interface
+	 * actually in use on the platform, we use this et0 MAC
+	 * address for et2.
+	 */
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&nandcs {
+	/* Spansion S34ML01G2, 128MB with 128KB erase blocks */
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/*
+		 * This is called "nflash" in the vendor kernel with
+		 * "upgrade" and "rootfs" (probably using OpenWrt
+		 * splitpart). We call it "firmware" like standard tools
+		 * assume. The CFE loader contains incorrect information
+		 * about TRX partitions, ignore this, there are no TRX
+		 * partitions: this device uses SEAMA.
+		 */
+		firmware@0 {
+			label = "firmware";
+			reg = <0x00000000 0x08000000>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@8 {
+			reg = <8>;
+			label = "cpu";
+			ethernet = <&gmac2>;
+			phy-mode = "rgmii";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
new file mode 100644
index 000000000000..d9a16a820e7f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "linksys,panamera", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Linksys EA9500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1c080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1c080000 0x100000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+				label = "WiFi";
+				linux,code = <KEY_RFKILL>;
+				gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
+		};
+
+		button-reset {
+				label = "Reset";
+				linux,code = <KEY_RESTART>;
+				gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:white:wps";
+			gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:green:usb2";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port2>, <&ehci_port2>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-power {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-wifi-disabled {
+			label = "bcm53xx:amber:wifi-disabled";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wifi-enabled {
+			label = "bcm53xx:white:wifi-enabled";
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar1 {
+			label = "bcm53xx:white:bluebar1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar2 {
+			label = "bcm53xx:white:bluebar2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar3 {
+			label = "bcm53xx:white:bluebar3";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+
+		led-bluebar4 {
+			label = "bcm53xx:white:bluebar4";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar5 {
+			label = "bcm53xx:white:bluebar5";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar6 {
+			label = "bcm53xx:white:bluebar6";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar7 {
+			label = "bcm53xx:white:bluebar7";
+			gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-bluebar8 {
+			label = "bcm53xx:white:bluebar8";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	mdio-mux@18003000 {
+
+		/* BIT(9) = 1 => external mdio */
+		mdio@200 {
+			reg = <0x200>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			switch@0  {
+				compatible = "brcm,bcm53125";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+				reset-names = "robo_reset";
+				reg = <0>;
+				dsa,member = <1 0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinmux_mdio>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						label = "lan1";
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan5";
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan2";
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan6";
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan3";
+					};
+
+					sw1_p8: port@8 {
+						reg = <8>;
+						ethernet = <&sw0_p0>;
+						label = "cpu";
+
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+				};
+			};
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@1 {
+			reg = <1>;
+			label = "lan7";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan4";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan8";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			ethernet = <&gmac0>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@7 {
+			reg = <7>;
+			ethernet = <&gmac1>;
+			label = "cpu";
+			status = "disabled";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			reg = <8>;
+			ethernet = <&gmac2>;
+			label = "cpu";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sw0_p0: port@0 {
+			reg = <0>;
+			label = "extsw";
+
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "linksys,ns-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "devinfo";
+			reg = <0x0180000 0x080000>;
+		};
+
+		partition@200000 {
+			reg = <0x0200000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@1f00000 {
+			reg = <0x01f00000 0x01d00000>;
+			compatible = "linksys,ns-firmware", "brcm,trx";
+		};
+
+		partition@5200000 {
+			label = "system";
+			reg = <0x05200000 0x02e00000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
new file mode 100644
index 000000000000..41a0722fa64a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul ABR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan4";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan2";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
new file mode 100644
index 000000000000..c56c7e366848
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+
+/ {
+	compatible = "luxul,xap-1610-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XAP-1610 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
new file mode 100644
index 000000000000..1b5c91a524ac
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xbr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XBR-4500 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+				<&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan4";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan2";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
new file mode 100644
index 000000000000..739063b77b1f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2019 Legrand AV Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwc-2000-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWC-2000 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
new file mode 100644
index 000000000000..7afc68d5d2c2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3100 V1";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-lan3 {
+			label = "bcm53xx:green:lan3";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan4 {
+			label = "bcm53xx:green:lan4";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wan {
+			label = "bcm53xx:green:wan";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan1 {
+			label = "bcm53xx:green:lan1";
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+
+		led-lan2 {
+			label = "bcm53xx:green:lan2";
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
new file mode 100644
index 000000000000..60a2c441d5bd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2018 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Luxul XWR-3150 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	nvram@1eff0000 {
+		compatible = "brcm,nvram";
+		reg = <0x1eff0000 0x10000>;
+
+		et0macaddr: et0macaddr {
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			label = "bcm53xx:green:power";
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-usb3 {
+			label = "bcm53xx:green:usb3";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>,
+					  <&xhci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-status {
+			label = "bcm53xx:green:status";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+
+		led-2ghz {
+			label = "bcm53xx:green:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:green:5ghz";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "lan4";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan3";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan1";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "wan";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
new file mode 100644
index 000000000000..76d562610654
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	compatible = "netgear,r8500", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Netgear R8500";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power0 {
+			label = "bcm53xx:white:power";
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-power1 {
+			label = "bcm53xx:amber:power";
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-1 {
+			label = "bcm53xx:white:5ghz-1";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5ghz-2 {
+			label = "bcm53xx:white:5ghz-2";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:white:2ghz";
+			gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb2 {
+			label = "bcm53xx:white:usb2";
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+
+		led-usb3 {
+			label = "bcm53xx:white:usb3";
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+		};
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm47094-phicomm-k3.dts b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
new file mode 100644
index 000000000000..3bf6e24978ac
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094-phicomm-k3.dts
@@ -0,0 +1,70 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2017 Hamster Tian <haotia@gmail.com>
+ * Copyright (C) 2019 Hao Dong <halbertdong@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm47094.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	compatible = "phicomm,k3", "brcm,bcm47094", "brcm,bcm4708";
+	model = "Phicomm K3";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x18000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&nandcs {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0000000 0x0080000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "nvram";
+			reg = <0x0080000 0x0100000>;
+		};
+
+		partition@180000{
+			label = "phicomm";
+			reg = <0x0180000 0x0280000>;
+			read-only;
+		};
+
+		partition@400000 {
+			label = "firmware";
+			reg = <0x0400000 0x7C00000>;
+			compatible = "brcm,trx";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
new file mode 100644
index 000000000000..6282363313e1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include "bcm4708.dtsi"
+
+/ {
+};
+
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+
+	pinmux_mdio: mdio-pins {
+		groups = "mdio_grp";
+		function = "mdio";
+	};
+};
+
+&usb3_phy {
+	compatible = "brcm,ns-bx-usb3-phy";
+};
+
+&uart0 {
+	clock-frequency = <125000000>;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
new file mode 100644
index 000000000000..0734aa249b8e
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-1440-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-1440 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wlan {
+			label = "bcm53xx:blue:wlan";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-off";
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
new file mode 100644
index 000000000000..e6fb6cbe6963
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2017 Luxul Inc.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Luxul XAP-810 V1";
+
+	chosen {
+		bootargs = "earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds-0 {
+		compatible = "gpio-leds";
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
+		led-system {
+			label = "bcm53xx:green:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	leds-1 {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
new file mode 100644
index 000000000000..dab2e5f63a72
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "tenda,ac9", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Tenda AC9";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds-0 {
+		compatible = "gpio-leds";
+
+		led-usb {
+			label = "bcm53xx:blue:usb";
+			gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&ohci_port1>, <&ehci_port1>;
+			linux,default-trigger = "usbport";
+		};
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-system {
+			label = "bcm53xx:blue:system";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	leds-1 {
+		compatible = "gpio-leds";
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-rfkill {
+			label = "WiFi";
+			linux,code = <KEY_RFKILL>;
+			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			pcie0_chipcommon: chipcommon@0 {
+				reg = <0 0x1000>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "wan";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan1";
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan2";
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan3";
+		};
+
+		port@4 {
+			reg = <4>;
+			label = "lan4";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
new file mode 100644
index 000000000000..cd25ed2757b7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm47622", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm47622-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
new file mode 100644
index 000000000000..14f58033efeb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR26 / Codename: Venom
+ *
+ * Copyright (C) 2022 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr26", "brcm,bcm53015", "brcm,bcm4708";
+	model = "Meraki MR26";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
+			panic-indicator;
+		};
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		key-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <50000000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x200000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x200000 0x200000>;
+			/* empty */
+		};
+
+		partition@400000 {
+			label = "u-boot-backup";
+			reg = <0x400000 0x200000>;
+			/* empty */
+		};
+
+		partition@600000 {
+			label = "u-boot-env-backup";
+			reg = <0x600000 0x200000>;
+			/* empty */
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	ina219@40 {
+		compatible = "ti,ina219"; /* PoE power */
+		reg = <0x40>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* it's empty */
+	};
+};
+
+&thermal {
+	status = "disabled";
+	/* does not work, reads 418 degree Celsius */
+};
diff --git a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
new file mode 100644
index 000000000000..c1f54391746f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "bcm4709.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DWL-8610AP";
+	compatible = "dlink,dwl-8610ap", "brcm,bcm53016", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		/* 512 MB RAM in 2 x Macronix D9PSH chips */
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-power {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-diag {
+			/* Actually "diag" unclear what this means */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-wlan-2g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-wlan-5g {
+			function = LED_FUNCTION_WLAN;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			/* This GPIO is actually stored in NVRAM, but it's not gonna change */
+			gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	/*
+	 * Flash memory at 0x1e000000-0x1fffffff
+	 * Macronix 32 64KB blocks; total size 2MB, same that can be
+	 * found attached to the spi_nor SPI controller.
+	 */
+	nvram@1e080000 {
+		compatible = "brcm,nvram";
+		reg = <0x1e080000 0x00020000>;
+
+		et0macaddr: et0macaddr {
+		};
+
+		et1macaddr: et1macaddr {
+		};
+	};
+};
+
+&gmac0 {
+	nvmem-cells = <&et0macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&gmac1 {
+	nvmem-cells = <&et1macaddr>;
+	nvmem-cell-names = "mac-address";
+};
+
+&spi_nor {
+	/* Serial SPI NOR Flash MX 25L1606E */
+	status = "okay";
+};
+
+&nandcs {
+	/*
+	 * Spansion S34ML01G100TFI00 128 MB NAND Flash memory
+	 *
+	 * This ECC is a bit unorthodox but it is what the stock firmware
+	 * is using, so to be able to mount the original partitions
+	 * this is necessary.
+	 */
+	nand-ecc-strength = <5>;
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* This is named nflash1.trx in CFE */
+		trx@0 {
+			label = "firmware";
+			reg = <0x00000000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.trx2 in CFE */
+		trx2@2800000 {
+			label = "firmware2";
+			reg = <0x02800000 0x02800000>;
+			compatible = "brcm,trx";
+		};
+
+		/* This is named nflash1.rwfs in CFE */
+		free@5000000 {
+			label = "free";
+			reg = <0x05000000 0x03000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
new file mode 100644
index 000000000000..46c2c93b01d8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Meraki MR32 / Codename: Espresso
+ *
+ * Copyright (C) 2018-2020 Christian Lamparter <chunkeey@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "meraki,mr32", "brcm,bcm53016", "brcm,bcm4708";
+	model = "Meraki MR32";
+
+	chosen {
+		bootargs = " console=ttyS0,115200n8 earlycon";
+	};
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	aliases {
+		serial1 = &uart2;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		sysled3 {
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+		sysled2 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-0 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 0 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-1 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 1 50000 0>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			/* SYS-LED 1 - Tricolor */
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 50000 0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	/delete-property/ clocks;
+};
+
+&uart1 {
+	status = "disabled";
+};
+
+&uart2 {
+	status = "okay";
+	/*
+	 * bluetooth-le {
+	 *	compatible = "brcm,bcm20732";
+	 *	enable-gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
+	 *};
+	 */
+};
+
+&gmac0 {
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&mac_address>;
+};
+
+&gmac1 {
+	status = "disabled";
+};
+&gmac2 {
+	status = "disabled";
+};
+&gmac3 {
+	status = "disabled";
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_pwm>;
+};
+
+&nandcs {
+	nand-ecc-algo = "hw";
+
+	partitions {
+		/*
+		 * The partition autodetection does not work for this device.
+		 * It will only detect the "nvram" partition with an incorrect size.
+		 *	[    1.721667] 1 bcm47xxpart partitions found on MTD device brcmnand.0
+		 *	[    1.727962] Creating 1 MTD partitions on "brcmnand.0":
+		 *	[    1.733117] 0x000000400000-0x000008000000 : "nvram"
+		 */
+
+		compatible = "fixed-partitions";
+		#address-cells = <0x1>;
+		#size-cells = <0x1>;
+
+		partition0@0 {
+			label = "u-boot";
+			reg = <0x0 0x100000>;
+			read-only;
+		};
+
+		partition1@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+			read-only;
+		};
+
+		partition2@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+			read-only;
+		};
+
+		partition3@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+			read-only;
+		};
+
+		partition4@800000 {
+			label = "ubi";
+			reg = <0x800000 0x7780000>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "poe";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+
+			fixed-link {
+				speed = <1000>;
+				duplex-full;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinmux_i2c>;
+
+	clock-frequency = <100000>;
+
+	current_sense: ina219@45 {
+		compatible = "ti,ina219";
+		reg = <0x45>;
+		shunt-resistor = <60000>; /* = 60 mOhms */
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
new file mode 100644
index 000000000000..c349e8f0afc5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch1.dtsi
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal.milecki@gmail.com>
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <1>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
new file mode 100644
index 000000000000..18e25e302b13
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch4.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2016 Luxul Inc.
+ */
+
+#include "bcm5301x-nand-cs0.dtsi"
+
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <4>;
+	nand-ecc-step-size = <512>;
+};
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
index d10781e36f54..c8e56d30bd6f 100644
--- a/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0-bch8.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 /*
  * Broadcom BCM470X / BCM5301X Nand chip defaults.
  *
@@ -5,20 +6,12 @@
  * and uses 8 bit ECC.
  *
  * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
- *
- * Licensed under the GNU/GPL. See COPYING for details.
  */
 
-/ {
-	nand@18028000 {
-		nandcs@0 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+#include "bcm5301x-nand-cs0.dtsi"
 
-			nand-ecc-strength = <8>;
-			nand-ecc-step-size = <512>;
-		};
-	};
+&nandcs {
+	nand-ecc-algo = "bch";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
 };
diff --git a/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
new file mode 100644
index 000000000000..be9a00ff752d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm5301x-nand-cs0.dtsi
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Broadcom Northstar NAND.
+ *
+ * Copyright (C) 2015 Hauke Mehrtens <hauke@hauke-m.de>
+ */
+
+/ {
+	nand-controller@18028000 {
+		nandcs: nand@0 {
+			compatible = "brcm,nandcs";
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 21fefd4cdc25..5fc1b847f4aa 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -8,90 +8,143 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <dt-bindings/clock/bcm-nsp.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "skeleton.dtsi"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	interrupt-parent = <&gic>;
 
-	chipcommonA {
+	chipcommon-a-bus@18000000 {
 		compatible = "simple-bus";
 		ranges = <0x00000000 0x18000000 0x00001000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		uart0: serial@0300 {
+		uart0: serial@300 {
 			compatible = "ns16550";
 			reg = <0x0300 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
+			clocks = <&iprocslow>;
 			status = "disabled";
 		};
 
-		uart1: serial@0400 {
+		uart1: serial@400 {
 			compatible = "ns16550";
 			reg = <0x0400 0x100>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
-			clock-frequency = <100000000>;
+			clocks = <&iprocslow>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinmux_uart1>;
 			status = "disabled";
 		};
 	};
 
-	mpcore {
+	mpcore-bus@19000000 {
 		compatible = "simple-bus";
-		ranges = <0x00000000 0x19020000 0x00003000>;
+		ranges = <0x00000000 0x19000000 0x00023000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 
-		scu@0000 {
+		a9pll: arm_clk@0 {
+			#clock-cells = <0>;
+			compatible = "brcm,nsp-armpll";
+			clocks = <&osc>;
+			reg = <0x00000 0x1000>;
+		};
+
+		scu@20000 {
 			compatible = "arm,cortex-a9-scu";
-			reg = <0x0000 0x100>;
+			reg = <0x20000 0x100>;
 		};
 
-		timer@0200 {
+		timer@20200 {
 			compatible = "arm,cortex-a9-global-timer";
-			reg = <0x0200 0x100>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
+			reg = <0x20200 0x100>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&periph_clk>;
 		};
 
-		local-timer@0600 {
+		timer@20600 {
 			compatible = "arm,cortex-a9-twd-timer";
-			reg = <0x0600 0x100>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk_periph>;
+			reg = <0x20600 0x20>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
+		};
+
+		watchdog@20620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0x20620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&periph_clk>;
 		};
 
-		gic: interrupt-controller@1000 {
+		gic: interrupt-controller@21000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 			interrupt-controller;
-			reg = <0x1000 0x1000>,
-			      <0x0100 0x100>;
+			reg = <0x21000 0x1000>,
+			      <0x20100 0x100>;
 		};
 
-		L2: cache-controller@2000 {
+		L2: cache-controller@22000 {
 			compatible = "arm,pl310-cache";
-			reg = <0x2000 0x1000>;
+			reg = <0x22000 0x1000>;
 			cache-unified;
+			arm,shared-override;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
 			cache-level = <2>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupts =
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	clocks {
 		#address-cells = <1>;
-		#size-cells = <0>;
+		#size-cells = <1>;
+		ranges;
 
-		/* As long as we do not have a real clock driver us this
-		 * fixed clock */
-		clk_periph: periph {
+		osc: oscillator {
+			#clock-cells = <0>;
 			compatible = "fixed-clock";
+			clock-frequency = <25000000>;
+		};
+
+		iprocmed: iprocmed {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		iprocslow: iprocslow {
 			#clock-cells = <0>;
-			clock-frequency = <400000000>;
+			compatible = "fixed-factor-clock";
+			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		periph_clk: periph_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&a9pll>;
+			clock-div = <2>;
+			clock-mult = <1>;
 		};
 	};
 
@@ -108,6 +161,21 @@
 			/* ChipCommon */
 			<0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
 
+			/* Switch Register Access Block */
+			<0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+
 			/* PCIe Controller 0 */
 			<0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
 			<0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
@@ -165,10 +233,282 @@
 
 			gpio-controller;
 			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pcie0: pcie@12000 {
+			reg = <0x00012000 0x1000>;
+		};
+
+		pcie1: pcie@13000 {
+			reg = <0x00013000 0x1000>;
+		};
+
+		pcie2: pcie@14000 {
+			reg = <0x00014000 0x1000>;
+		};
+
+		usb2: usb2@21000 {
+			reg = <0x00021000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			ehci: usb@21000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ehci";
+				reg = <0x00021000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@22000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ohci";
+				reg = <0x00022000 0x1000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		usb3: usb3@23000 {
+			reg = <0x00023000 0x1000>;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			interrupt-parent = <&gic>;
+
+			xhci: usb@23000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-xhci";
+				reg = <0x00023000 0x1000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb3_phy>;
+				phy-names = "usb";
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				xhci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@24000 {
+			reg = <0x24000 0x800>;
+		};
+
+		gmac1: ethernet@25000 {
+			reg = <0x25000 0x800>;
+		};
+
+		gmac2: ethernet@26000 {
+			reg = <0x26000 0x800>;
+		};
+
+		gmac3: ethernet@27000 {
+			reg = <0x27000 0x800>;
+		};
+	};
+
+	pwm: pwm@18002000 {
+		compatible = "brcm,iproc-pwm";
+		reg = <0x18002000 0x28>;
+		clocks = <&osc>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	mdio: mdio@18003000 {
+		compatible = "brcm,iproc-mdio";
+		reg = <0x18003000 0x8>;
+		#size-cells = <0>;
+		#address-cells = <1>;
+	};
+
+	mdio-mux@18003000 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		mdio-parent-bus = <&mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x18003000 0x4>;
+		mux-mask = <0x200>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			usb3_phy: usb3-phy@10 {
+				compatible = "brcm,ns-ax-usb3-phy";
+				reg = <0x10>;
+				usb3-dmp-syscon = <&usb3_dmp>;
+				#phy-cells = <0>;
+				status = "disabled";
+			};
 		};
 	};
 
-	nand: nand@18028000 {
+	usb3_dmp: syscon@18105000 {
+		reg = <0x18105000 0x1000>;
+	};
+
+	uart2: serial@18008000 {
+		compatible = "ns16550a";
+		reg = <0x18008000 0x20>;
+		clocks = <&iprocslow>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		reg-shift = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@18009000 {
+		compatible = "brcm,iproc-i2c";
+		reg = <0x18009000 0x50>;
+		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	dmu-bus@1800c000 {
+		compatible = "simple-bus";
+		ranges = <0 0x1800c000 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cru-bus@100 {
+			compatible = "brcm,ns-cru", "simple-mfd";
+			reg = <0x100 0x1a4>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			lcpll0: clock-controller@100 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-lcpll0";
+				reg = <0x100 0x14>;
+				clocks = <&osc>;
+				clock-output-names = "lcpll0", "pcie_phy",
+						     "sdio", "ddr_phy";
+			};
+
+			genpll: clock-controller@140 {
+				#clock-cells = <1>;
+				compatible = "brcm,nsp-genpll";
+				reg = <0x140 0x24>;
+				clocks = <&osc>;
+				clock-output-names = "genpll", "phy",
+						     "ethernetclk",
+						     "usbclk", "iprocfast",
+						     "sata1", "sata2";
+			};
+
+			usb2_phy: phy@164 {
+				compatible = "brcm,ns-usb2-phy";
+				reg = <0x164 0x4>;
+				brcm,syscon-clkset = <&cru_clkset>;
+				clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>;
+				clock-names = "phy-ref-clk";
+				#phy-cells = <0>;
+			};
+
+			cru_clkset: syscon@180 {
+				compatible = "brcm,cru-clkset", "syscon";
+				reg = <0x180 0x4>;
+			};
+
+			pinctrl: pinctrl@1c0 {
+				compatible = "brcm,bcm4708-pinmux";
+				reg = <0x1c0 0x24>;
+				reg-names = "cru_gpio_control";
+
+				spi-pins {
+					groups = "spi_grp";
+					function = "spi";
+				};
+
+				pinmux_i2c: i2c-pins {
+					groups = "i2c_grp";
+					function = "i2c";
+				};
+
+				pinmux_pwm: pwm-pins {
+					groups = "pwm0_grp", "pwm1_grp",
+						 "pwm2_grp", "pwm3_grp";
+					function = "pwm";
+				};
+
+				pinmux_uart1: uart1-pins {
+					groups = "uart1_grp";
+					function = "uart1";
+				};
+			};
+
+			thermal: thermal@2c0 {
+				compatible = "brcm,ns-thermal";
+				reg = <0x2c0 0x10>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+	};
+
+	srab: ethernet-switch@18007000 {
+		compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab";
+		reg = <0x18007000 0x1000>;
+
+		status = "disabled";
+
+		/* ports are defined in board DTS */
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	rng: rng@18004000 {
+		compatible = "brcm,bcm5301x-rng";
+		reg = <0x18004000 0x14>;
+	};
+
+	nand_controller: nand-controller@18028000 {
 		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";
 		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;
 		reg-names = "nand", "iproc-idm", "iproc-ext";
@@ -179,4 +519,63 @@
 
 		brcm,nand-has-wp;
 	};
+
+	spi@18029200 {
+		compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi";
+		reg = <0x18029200 0x184>,
+		      <0x18029000 0x124>,
+		      <0x1811b408 0x004>,
+		      <0x180293a0 0x01c>;
+		reg-names = "mspi", "bspi", "intr_regs", "intr_status_reg";
+		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mspi_done",
+				  "mspi_halted",
+				  "spi_lr_fullness_reached",
+				  "spi_lr_session_aborted",
+				  "spi_lr_impatient",
+				  "spi_lr_session_done",
+				  "spi_lr_overread";
+		clocks = <&iprocmed>;
+		clock-names = "iprocmed";
+		num-cs = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		spi_nor: flash@0 {
+			compatible = "jedec,spi-nor";
+			reg = <0>;
+			spi-max-frequency = <20000000>;
+			status = "disabled";
+
+			partitions {
+				compatible = "brcm,bcm947xx-cfe-partitions";
+			};
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <1000>;
+			coefficients = <(-556) 418000>;
+			thermal-sensors = <&thermal>;
+
+			trips {
+				cpu-crit {
+					temperature = <125000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
new file mode 100644
index 000000000000..975f854f652f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53340-ubnt-unifi-switch8.dts
@@ -0,0 +1,86 @@
+/*
+ * DTS for Unifi Switch 8 port
+ *
+ * Copyright (C) 2017 Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm-hr2.dtsi"
+
+/ {
+	compatible = "ubnt,unifi-switch8", "brcm,bcm53342", "brcm,hr2";
+	model = "Ubiquiti UniFi Switch 8 (BCM53342)";
+
+	/* Hurricane 2 designs use the second UART */
+	chosen {
+		bootargs = "console=ttyS1,115200 earlyprintk";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>,
+		      <0x68000000 0x08000000>;
+	};
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+
+	flash: flash@0 {
+		compatible = "m25p80";
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <12500000>;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "u-boot-env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "shmoo";
+			reg = <0xd0000 0x10000>;
+		};
+
+		partition@e0000 {
+			label = "kernel0";
+			reg = <0xe0000 0xf00000>;
+		};
+
+		partition@fe0000 {
+			label = "kernel1";
+			reg = <0xfe0000 0xf10000>;
+		};
+
+		partition@1ef0000 {
+			label = "cfg";
+			reg = <0x1ef0000 0x100000>;
+		};
+
+		partition@1ff0000 {
+			label = "EEPROM";
+			reg = <0x1ff0000 0x10000>;
+		};
+	};
+};
+
+&pcie0 {
+	/* Attaches to the internal switch */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm53573.dtsi b/arch/arm/boot/dts/bcm53573.dtsi
new file mode 100644
index 000000000000..3f03a381db0f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm53573.dtsi
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+		};
+	};
+
+	mpcore@18310000 {
+		compatible = "simple-bus";
+		ranges = <0x00000000 0x18310000 0x00008000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+			      <0x2000 0x0100>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		alp: oscillator {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <40000000>;
+		};
+	};
+
+	axi@18000000 {
+		compatible = "brcm,bus-axi";
+		reg = <0x18000000 0x1000>;
+		ranges = <0x00000000 0x18000000 0x00100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0x000fffff 0xffff>;
+		interrupt-map =
+			/* ChipCommon */
+			<0x00000000 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 0 */
+			<0x00001000 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* PCIe Controller 0 */
+			<0x00002000 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 1 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 2 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 3 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 4 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<0x00002000 5 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* USB 2.0 Controller */
+			<0x00004000 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 0 */
+			<0x00005000 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* IEEE 802.11 1 */
+			<0x0000a000 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+
+			/* Ethernet Controller 1 */
+			<0x0000b000 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+
+		chipcommon: chipcommon@0 {
+			compatible = "simple-bus";
+			reg = <0x00000000 0x1000>;
+			ranges;
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			uart0: serial@300 {
+				compatible = "ns16550a";
+				reg = <0x0300 0x100>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_PPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&alp>;
+				status = "okay";
+			};
+		};
+
+		pcie0: pcie@2000 {
+			reg = <0x00002000 0x1000>;
+		};
+
+		usb2: usb2@4000 {
+			reg = <0x4000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			ehci: usb@4000 {
+				compatible = "generic-ehci";
+				reg = <0x4000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ehci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ehci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+
+			ohci: usb@d000 {
+				#usb-cells = <0>;
+
+				compatible = "generic-ohci";
+				reg = <0xd000 0x1000>;
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ohci_port1: port@1 {
+					reg = <1>;
+					#trigger-source-cells = <0>;
+				};
+
+				ohci_port2: port@2 {
+					reg = <2>;
+					#trigger-source-cells = <0>;
+				};
+			};
+		};
+
+		gmac0: ethernet@5000 {
+			reg = <0x5000 0x1000>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switch: switch@1e {
+					compatible = "brcm,bcm53125";
+					reg = <0x1e>;
+
+					status = "disabled";
+
+					/* ports are defined in board DTS */
+					ports {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+			};
+		};
+
+		gmac1: ethernet@b000 {
+			reg = <0xb000 0x1000>;
+		};
+
+		pmu@12000 {
+			compatible = "simple-mfd", "syscon";
+			reg = <0x00012000 0x00001000>;
+
+			ilp: ilp {
+				compatible = "brcm,bcm53573-ilp";
+				clocks = <&alp>;
+				#clock-cells = <0>;
+				clock-output-names = "ilp";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm59056.dtsi b/arch/arm/boot/dts/bcm59056.dtsi
index 066adfb10bd5..a9bb7ad81378 100644
--- a/arch/arm/boot/dts/bcm59056.dtsi
+++ b/arch/arm/boot/dts/bcm59056.dtsi
@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * Copyright 2014 Linaro Limited
 * Author: Matt Porter <mporter@linaro.org>
-*
-* This program is free software; you can redistribute it and/or modify it
-* under  the terms of the GNU General  Public License as published by the
-* Free Software Foundation;  either version 2 of the License, or (at your
-* option) any later version.
 */
 
 &pmu {
diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 34cd64051250..93281c47c9ba 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Broadcom BCM63138 DSL SoCs Device Tree
  */
@@ -5,11 +6,11 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
-#include "skeleton.dtsi"
-
 / {
-	compatible = "brcm,bcm63138";
-	model = "Broadcom BCM63138 DSL SoC";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "brcm,bcm63138", "brcm,bcmbca";
+	model = "Broadcom BCM963138 Reference Board";
 	interrupt-parent = <&gic>;
 
 	aliases {
@@ -40,20 +41,36 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		arm_timer_clk: arm_timer_clk {
+		/* UBUS peripheral clock */
+		periph_clk: periph_clk {
 			#clock-cells = <0>;
 			compatible = "fixed-clock";
-			clock-frequency = <500000000>;
+			clock-frequency = <50000000>;
+			clock-output-names = "periph";
 		};
 
-		periph_clk: periph_clk {
+		/* peripheral clock for system timer */
+		axi_clk: axi_clk {
 			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <2>;
+			clock-mult = <1>;
+		};
+
+		/* APB bus clock */
+		apb_clk: apb_clk {
+			#clock-cells = <0>;
+			compatible = "fixed-factor-clock";
+			clocks = <&armpll>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
 			compatible = "fixed-clock";
-			clock-frequency = <50000000>;
-			clock-output-names = "periph";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
 		};
 	};
 
@@ -80,7 +97,7 @@
 			reg = <0x1e000 0x100>;
 		};
 
-		gic: interrupt-controller@1e100 {
+		gic: interrupt-controller@1f000 {
 			compatible = "arm,cortex-a9-gic";
 			reg = <0x1f000 0x1000
 				0x1e100 0x100>;
@@ -92,21 +109,30 @@
 		global_timer: timer@1e200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x1e200 0x20>;
-			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&arm_timer_clk>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&axi_clk>;
 		};
 
 		local_timer: local-timer@1e600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x1e600 0x20>;
-			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&arm_timer_clk>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&axi_clk>;
 		};
 
 		twd_watchdog: watchdog@1e620 {
 			compatible = "arm,cortex-a9-twd-wdt";
 			reg = <0x1e620 0x20>;
-			interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+						  IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		armpll: armpll@20000 {
+			#clock-cells = <0>;
+			compatible = "brcm,bcm63138-armpll";
+			clocks = <&periph_clk>;
+			reg = <0x20000 0xf00>;
 		};
 
 		pmb0: reset-controller@4800c0 {
@@ -120,6 +146,37 @@
 			reg = <0x4800e0 0x10>;
 			#reset-cells = <2>;
 		};
+
+		ahci: sata@a000 {
+			compatible = "brcm,bcm63138-ahci", "brcm,sata3-ahci";
+			reg-names = "ahci", "top-ctrl";
+			reg = <0xa000 0x9ac>, <0x8040 0x24>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			resets = <&pmb0 3 1>;
+			reset-names = "ahci";
+			status = "disabled";
+
+			sata0: sata-port@0 {
+				reg = <0>;
+				phys = <&sata_phy0>;
+			};
+		};
+
+		sata_phy: sata-phy@8100 {
+			compatible = "brcm,bcm63138-sata-phy", "brcm,phy-sata3";
+			reg = <0x8100 0x1e00>;
+			reg-names = "phy";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+
+			sata_phy0: sata-phy@0 {
+				reg = <0>;
+				#phy-cells = <0>;
+			};
+		};
 	};
 
 	/* Legacy UBUS base */
@@ -137,7 +194,7 @@
 		serial0: serial@600 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x600 0x1b>;
-			interrupts = <GIC_SPI 32 0>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
@@ -146,20 +203,32 @@
 		serial1: serial@620 {
 			compatible = "brcm,bcm6345-uart";
 			reg = <0x620 0x1b>;
-			interrupts = <GIC_SPI 33 0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&periph_clk>;
 			clock-names = "periph";
 			status = "disabled";
 		};
 
-		nand: nand@2000 {
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63138-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		nand_controller: nand-controller@2000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.0", "brcm,brcmnand";
 			reg = <0x2000 0x600>, <0xf0 0x10>;
 			reg-names = "nand", "nand-int-base";
 			status = "disabled";
-			interrupts = <GIC_SPI 38 0>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "nand";
 		};
 
diff --git a/arch/arm/boot/dts/bcm63148.dtsi b/arch/arm/boot/dts/bcm63148.dtsi
new file mode 100644
index 000000000000..ba7f265db121
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63148.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63148", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		B15_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		B15_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "brcm,brahma-b15";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&B15_0>, <&B15_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <50000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@80030000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x80030000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffe8000 0x8000>;
+
+		uart0: serial@600 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x600 0x20>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63148-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm63178.dtsi b/arch/arm/boot/dts/bcm63178.dtsi
new file mode 100644
index 000000000000..d8268a1e889b
--- /dev/null
+++ b/arch/arm/boot/dts/bcm63178.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm63178", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm63178-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6756.dtsi b/arch/arm/boot/dts/bcm6756.dtsi
new file mode 100644
index 000000000000..49ecc1f0c18c
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6756.dtsi
@@ -0,0 +1,150 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6756", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x3>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>,
+			<&CA7_2>, <&CA7_3>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6756-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6846.dtsi b/arch/arm/boot/dts/bcm6846.dtsi
new file mode 100644
index 000000000000..fbc7d3a5dc5f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6846.dtsi
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6846", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <400000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial@640 {
+			compatible = "brcm,bcm6345-uart";
+			reg = <0x640 0x1b>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&periph_clk>;
+			clock-names = "refclk";
+			status = "disabled";
+		};
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6846-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6855.dtsi b/arch/arm/boot/dts/bcm6855.dtsi
new file mode 100644
index 000000000000..5e0fe26530f1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6855.dtsi
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6855", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x2>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>, <&CA7_2>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(3) | IRQ_TYPE_LEVEL_HIGH)>;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6855-hsspi", "brcm,bcmbca-hsspi-v1.1";
+			reg = <0x1000 0x600>, <0x2610 0x4>;
+			reg-names = "hsspi", "spim-ctrl";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
new file mode 100644
index 000000000000..96529d3d4dc2
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+
+		hsspi_pll: hsspi-pll {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	axi@81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x8000>;
+
+		gic: interrupt-controller@1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>,
+				<0x4000 0x2000>,
+				<0x6000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
+					IRQ_TYPE_LEVEL_HIGH)>;
+		};
+	};
+
+	bus@ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		hsspi: spi@1000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "brcm,bcm6878-hsspi", "brcm,bcmbca-hsspi-v1.0";
+			reg = <0x1000 0x600>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&hsspi_pll &hsspi_pll>;
+			clock-names = "hsspi", "pll";
+			num-cs = <8>;
+			status = "disabled";
+		};
+
+		uart0: serial@12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
index 0bb8d17e4c2d..f92d2cf85972 100644
--- a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
+++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 #include "bcm7445.dtsi"
 
@@ -5,7 +6,7 @@
 	model = "Broadcom STB (bcm7445), SVMB reference board";
 	compatible = "brcm,bcm7445", "brcm,brcmstb";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00 0x00000000 0x00 0x40000000>,
 		      <0x00 0x40000000 0x00 0x40000000>,
@@ -13,10 +14,10 @@
 	};
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@1 {
+	nand@1 {
 		compatible = "brcm,nandcs";
 		reg = <1>;
 		nand-ecc-step-size = <512>;
diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index 58dcd666257c..5ac2042515b8 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	#address-cells = <2>;
 	#size-cells = <2>;
@@ -64,7 +63,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_RAW(15) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	rdb {
+	rdb@f0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -109,6 +108,20 @@
 			brcm,int-fwd-mask = <0x70000>;
 		};
 
+		irq0_aon_intc: interrupt-controller@417280 {
+			compatible = "brcm,bcm7120-l2-intc";
+			reg = <0x417280 0x8>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x46 0x0>,
+				     <GIC_SPI 0x44 0x0>,
+				     <GIC_SPI 0x49 0x0>;
+			brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
+			brcm,int-fwd-mask = <0x0>;
+			brcm,irq-can-wake;
+		};
+
 		hif_intr2_intc: interrupt-controller@3e1000 {
 			compatible = "brcm,l2-intc";
 			reg = <0x3e1000 0x30>;
@@ -119,7 +132,23 @@
 			interrupt-names = "hif";
 		};
 
-		nand: nand@3e2800 {
+                aon_pm_l2_intc: interrupt-controller@410640 {
+			compatible = "brcm,l2-intc";
+			reg = <0x410640 0x30>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 0x40 0x0>;
+			interrupt-parent = <&gic>;
+			brcm,irq-can-wake;
+		};
+
+		aon-ctrl@410000 {
+			compatible = "brcm,brcmstb-aon-ctrl";
+			reg = <0x410000 0x200>, <0x410200 0x400>;
+			reg-names = "aon-ctrl", "aon-sram";
+		};
+
+		nand_controller: nand-controller@3e2800 {
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -167,6 +196,110 @@
 				#phy-cells = <0>;
 			};
 		};
+
+		upg_gio: gpio@40a700 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x40a700 0x80>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupt-parent = <&irq0_intc>;
+			interrupts = <6>;
+			brcm,gpio-bank-widths = <32 32 32 24>;
+		};
+
+		upg_gio_aon: gpio@4172c0 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x4172c0 0x40>;
+			#gpio-cells = <2>;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			interrupt-controller;
+			interrupts-extended = <&irq0_aon_intc 0x6>,
+					      <&aon_pm_l2_intc 0x5>;
+			wakeup-source;
+			brcm,gpio-bank-widths = <18 4>;
+		};
+
+	};
+
+	memory_controllers@f1100000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0xf1100000 0x200000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		memc@0 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+				};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@80000 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+
+		memc@100000 {
+			compatible = "brcm,brcmstb-memc", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x80000>;
+
+			memc-ddr@2000 {
+				compatible = "brcm,brcmstb-memc-ddr";
+				reg = <0x2000 0x800>;
+			};
+
+			ddr-phy@6000 {
+				compatible = "brcm,brcmstb-ddr-phy-v240.1";
+				reg = <0x6000 0x21c>;
+			};
+
+			shimphy@8000 {
+				compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+				reg = <0x8000 0xe4>;
+			};
+		};
+	};
+
+	sram@ffe00000 {
+		compatible = "brcm,boot-sram", "mmio-sram";
+		reg = <0x0 0xffe00000 0x0 0x10000>;
 	};
 
 	smpboot {
diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts
index 7db484323fd6..363009e747b3 100644
--- a/arch/arm/boot/dts/bcm911360_entphn.dts
+++ b/arch/arm/boot/dts/bcm911360_entphn.dts
@@ -44,23 +44,56 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
-
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		hook {
+		button-hook {
 			label = "HOOK";
 			linux,code = <KEY_O>;
 			gpios = <&gpio_asiu 48 0>;
 		};
 	};
 };
+
+&eth0 {
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+};
+
+&switch {
+	status = "okay";
+};
+
+&v3d {
+	assigned-clocks =
+		<&mipipll BCM_CYGNUS_MIPIPLL>,
+		<&mipipll BCM_CYGNUS_MIPIPLL_CH2_V3D>;
+	assigned-clock-rates = <525000000>, <300000000>;
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts
index 9658d4f62d59..091c73a46e08 100644
--- a/arch/arm/boot/dts/bcm911360k.dts
+++ b/arch/arm/boot/dts/bcm911360k.dts
@@ -43,11 +43,10 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
+&uart3 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm94708.dts b/arch/arm/boot/dts/bcm94708.dts
new file mode 100644
index 000000000000..d9eb2040b963
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94708.dts
@@ -0,0 +1,49 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94708)";
+	compatible = "brcm,bcm94708", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm94709.dts b/arch/arm/boot/dts/bcm94709.dts
new file mode 100644
index 000000000000..618c812eef73
--- /dev/null
+++ b/arch/arm/boot/dts/bcm94709.dts
@@ -0,0 +1,49 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM94709)";
+	compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
new file mode 100644
index 000000000000..3709baa2376f
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+	compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+	model = "Broadcom BCM947189ACDBMR";
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wps {
+			label = "bcm53xx:blue:wps";
+			gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5ghz {
+			label = "bcm53xx:blue:5ghz";
+			gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2ghz {
+			label = "bcm53xx:blue:2ghz";
+			gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		num-chipselects = <1>;
+		gpio-sck = <&chipcommon 21 0>;
+		gpio-miso = <&chipcommon 22 0>;
+		gpio-mosi = <&chipcommon 23 0>;
+		cs-gpios = <&chipcommon 24 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* External BCM6802 MoCA chip is connected */
+	};
+};
+
+&pcie0 {
+	ranges = <0x00000000 0 0 0 0 0x00100000>;
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge@0,0,0 {
+		reg = <0x0000 0 0 0 0>;
+		ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0,1,0 {
+			reg = <0x0000 0 0 0 0>;
+			ranges = <0x00000000 0 0 0 0x00100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&usb2 {
+	vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/bcm947622.dts b/arch/arm/boot/dts/bcm947622.dts
new file mode 100644
index 000000000000..93b8ce22678d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947622.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm47622.dtsi"
+
+/ {
+	model = "Broadcom BCM947622 Reference Board";
+	compatible = "brcm,bcm947622", "brcm,bcm47622", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
new file mode 100644
index 000000000000..4fe3b3653376
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -0,0 +1,92 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+	model = "NorthStar Enterprise Router (BCM953012ER)";
+	compatible = "brcm,bcm953012er", "brcm,bcm53012", "brcm,bcm4708";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			label = "WPS";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+		};
+
+		button-restart {
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			reg = <0>;
+			label = "port0";
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "port1";
+		};
+
+		port@5 {
+			reg = <5>;
+			label = "cpu";
+			ethernet = <&gmac0>;
+		};
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012hr.dts b/arch/arm/boot/dts/bcm953012hr.dts
new file mode 100644
index 000000000000..b070b69466bd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012hr.dts
@@ -0,0 +1,102 @@
+/*
+ *  SPDX-License-Identifier: BSD-3-Clause
+ *
+ *  Copyright(c) 2017 Broadcom
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom nor the names of its contributors
+ *      may be used to endorse or promote products derived from this
+ *      software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch4.dtsi"
+
+/ {
+	model = "NorthStar HR (BCM953012HR)";
+	compatible = "brcm,bcm953012hr", "brcm,bcm53012", "brcm,bcm4708";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nandcs {
+	partition@0 {
+		label = "nboot";
+		reg = <0x00000000 0x00200000>;
+		read-only;
+	};
+	partition@200000 {
+		label = "nenv";
+		reg = <0x00200000 0x00400000>;
+	};
+	partition@600000 {
+		label = "nsystem";
+		reg = <0x00600000 0x00a00000>;
+	};
+	partition@1000000 {
+		label = "nrootfs";
+		reg = <0x01000000 0x07000000>;
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm953012k.dts b/arch/arm/boot/dts/bcm953012k.dts
new file mode 100644
index 000000000000..f1e6bcaa1edd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012k.dts
@@ -0,0 +1,120 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+	model = "NorthStar SVK (BCM953012K)";
+	compatible = "brcm,bcm953012k", "brcm,bcm53012", "brcm,bcm4708";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x07000000>;
+		};
+	};
+};
+
+&spi_nor {
+	status = "okay";
+	spi-max-frequency = <62500000>;
+	m25p,default-addr-width = <3>;
+
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	partition@0 {
+		label = "boot";
+		reg = <0x00000000 0x000d0000>;
+	};
+	partition@d000 {
+		label = "env";
+		reg = <0x000d0000 0x00030000>;
+	};
+	partition@100000 {
+		label = "system";
+		reg = <0x00100000 0x00600000>;
+	};
+	partition@700000 {
+		label = "rootfs";
+		reg = <0x00700000 0x00900000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts
index 2f63052f9d48..dda3e11b711f 100644
--- a/arch/arm/boot/dts/bcm958300k.dts
+++ b/arch/arm/boot/dts/bcm958300k.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
 
 / {
 	model = "Cygnus SVK (BCM958300K)";
@@ -43,35 +44,34 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
 
-	pcie0: pcie@18012000 {
-		status = "okay";
-	};
+&pcie0 {
+	status = "okay";
+};
 
-	pcie1: pcie@18013000 {
-		status = "okay";
-	};
+&pcie1 {
+	status = "okay";
+};
 
-	uart3: serial@18023000 {
-		status = "okay";
-	};
+&uart3 {
+	status = "okay";
+};
 
-	nand: nand@18046000 {
-		nandcs@1 {
-			compatible = "brcm,nandcs";
-			reg = <0>;
-			nand-on-flash-bbt;
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
 
-			#address-cells = <1>;
-			#size-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
-			nand-ecc-strength = <24>;
-			nand-ecc-step-size = <1024>;
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
 
-			brcm,nand-oob-sector-size = <27>;
-		};
+		brcm,nand-oob-sector-size = <27>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts
index 56b429abbedb..ea3c6b88b313 100644
--- a/arch/arm/boot/dts/bcm958305k.dts
+++ b/arch/arm/boot/dts/bcm958305k.dts
@@ -33,6 +33,7 @@
 /dts-v1/;
 
 #include "bcm-cygnus.dtsi"
+#include "bcm9hmidc.dtsi"
 
 / {
 	model = "Cygnus Wireless Audio (BCM958305K)";
@@ -43,11 +44,42 @@
 	};
 
 	chosen {
-		stdout-path = &uart3;
-		bootargs = "console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
 	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@1 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
 
-	uart3: serial@18023000 {
-		status = "okay";
+		brcm,nand-oob-sector-size = <27>;
 	};
 };
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
new file mode 100644
index 000000000000..15f023656df0
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -0,0 +1,185 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958522ER)";
+	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
new file mode 100644
index 000000000000..9b9c225a1fb3
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -0,0 +1,197 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958525ER)";
+	compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
new file mode 100644
index 000000000000..ca9311452739
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -0,0 +1,217 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus XMC (BCM958525xmc)";
+	compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 31 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* XHCI support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	temperature-sensor@4c {
+		compatible = "adi,adt7461a";
+		reg = <0x4c>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "st,m41t81";
+		reg = <0x68>;
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sdio {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
new file mode 100644
index 000000000000..9db3c851451a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -0,0 +1,227 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958622HR)";
+	compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 and SLIC support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58622-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
new file mode 100644
index 000000000000..32786e7c4e12
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -0,0 +1,231 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958623HR)";
+	compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 and SLIC support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58623-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
new file mode 100644
index 000000000000..c54451dde6dd
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:wan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:wan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:wan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:wan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&axi {
+	mdio-mux@3f1c0 {
+		compatible = "mdio-mux-mmioreg", "mdio-mux";
+		reg = <0x3f1c0 0x4>;
+		mux-mask = <0x2000>;
+		mdio-parent-bus = <&mdio_ext>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mdio@0 {
+			reg = <0x0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port6: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port7: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port8: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port9: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port10: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <1 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii1>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan8";
+						phy-handle = <&phy_port6>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan9";
+						phy-handle = <&phy_port7>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan10";
+						phy-handle = <&phy_port8>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan11";
+						phy-handle = <&phy_port9>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan12";
+						phy-handle = <&phy_port10>;
+					};
+				};
+			};
+		};
+
+		mdio-mii@2000 {
+			reg = <0x2000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy_port1: phy@0 {
+				reg = <0>;
+			};
+
+			phy_port2: phy@1 {
+				reg = <1>;
+			};
+
+			phy_port3: phy@2 {
+				reg = <2>;
+			};
+
+			phy_port4: phy@3 {
+				reg = <3>;
+			};
+
+			phy_port5: phy@4 {
+				reg = <4>;
+			};
+
+			switch@10 {
+				compatible = "qca,qca8337";
+				reg = <0x10>;
+				dsa,member = <2 0>;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					port@0 {
+						reg = <0>;
+						ethernet = <&sgmii0>;
+						phy-mode = "sgmii";
+						qca,sgmii-enable-pll;
+						qca,sgmii-txclk-falling-edge;
+						fixed-link {
+							speed = <1000>;
+							full-duplex;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+						label = "lan3";
+						phy-handle = <&phy_port1>;
+					};
+
+					port@2 {
+						reg = <2>;
+						label = "lan4";
+						phy-handle = <&phy_port2>;
+					};
+
+					port@3 {
+						reg = <3>;
+						label = "lan5";
+						phy-handle = <&phy_port3>;
+					};
+
+					port@4 {
+						reg = <4>;
+						label = "lan6";
+						phy-handle = <&phy_port4>;
+					};
+
+					port@5 {
+						reg = <5>;
+						label = "lan7";
+						phy-handle = <&phy_port5>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+	dsa,member = <0 0>;
+
+	ports {
+		port@0 {
+			label = "wan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "wan2";
+			reg = <1>;
+		};
+
+		sgmii0: port@4 {
+			label = "sw0";
+			reg = <4>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		sgmii1: port@5 {
+			label = "sw1";
+			reg = <5>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
new file mode 100644
index 000000000000..1830844c8404
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm958625-meraki-mx6x-common.dtsi"
+
+/ {
+
+	keys {
+		compatible = "gpio-keys-polled";
+		autorepeat;
+		poll-interval = <20>;
+
+		button-reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* green:lan1-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			/* green:lan1-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			/* green:lan2-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			/* green:lan2-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <3>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			/* green:lan3-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			/* green:lan3-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <5>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-6 {
+			/* green:lan4-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <6>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		};
+
+		led-7 {
+			/* green:lan4-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <7>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
+		};
+
+		led-8 {
+			/* green:wan-left */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <8>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
+		};
+
+		led-9 {
+			/* green:wan-right */
+			function = LED_FUNCTION_ACTIVITY;
+			function-enumerator = <9>;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
+		};
+
+		led-a {
+			/* amber:power */
+			function = LED_FUNCTION_FAULT;
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
+		};
+
+		led-b {
+			/* white:status */
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "lan1";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "lan2";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "lan3";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "lan4";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "wan";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
new file mode 100644
index 000000000000..9944566c1195
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64(A0)";
+	compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
new file mode 100644
index 000000000000..06939438e874
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64";
+	compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
new file mode 100644
index 000000000000..112fddb1eed8
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+#include "bcm-nsp-ax.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W(A0)";
+	compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
new file mode 100644
index 000000000000..de2e367c3e78
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx64w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-kingpin.dtsi"
+
+/ {
+	model = "Cisco Meraki MX64W";
+	compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
new file mode 100644
index 000000000000..d1b684dcdbfa
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65.dts
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65";
+	compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
new file mode 100644
index 000000000000..a2165aba3676
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx65w.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Device Tree Bindings for Cisco Meraki MX65W.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm958625-meraki-alamo.dtsi"
+
+/ {
+	model = "Cisco Meraki MX65W";
+	compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
new file mode 100644
index 000000000000..b0854d881ac6
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
+ *
+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
+ */
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_RED>;
+			pwms = <&pwm 1 50000>;
+			max-brightness = <255>;
+		};
+
+		led-2 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 2 50000>;
+			max-brightness = <255>;
+		};
+
+		led-3 {
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 3 50000>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&amac2 {
+	status = "okay";
+	nvmem-cells = <&mac_address>;
+	nvmem-cell-names = "mac-address";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		read-only;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		mac_address: mac-address@66 {
+			reg = <0x66 0x6>;
+		};
+	};
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x80000>;
+			read-only;
+		};
+
+		partition@80000 {
+			label = "shmoo";
+			reg = <0x80000 0x80000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "bootkernel1";
+			reg = <0x100000 0x300000>;
+		};
+
+		partition@400000 {
+			label = "nvram";
+			reg = <0x400000 0x100000>;
+		};
+
+		partition@500000 {
+			label = "bootkernel2";
+			reg = <0x500000 0x300000>;
+		};
+
+		partition@800000 {
+			label = "ubi";
+			reg = <0x800000 0x3f700000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_leds>;
+
+	pwm_leds: pwm_leds {
+		function = "pwm";
+		groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+	#pwm-cells = <2>;
+};
+
+&uart0 {
+	clock-frequency = <62500000>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
new file mode 100644
index 000000000000..74263d98de73
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -0,0 +1,254 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625HR)";
+	compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+
+	sfp: sfp {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c0>;
+		mod-def0-gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
+		los-gpios = <&gpioa 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpioa 30 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&gpioa 26 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@5 {
+			label = "sfp";
+			phy-mode = "sgmii";
+			reg = <5>;
+			sfp = <&sfp>;
+			managed = "in-band-status";
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
new file mode 100644
index 000000000000..69ebc7a913a7
--- /dev/null
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -0,0 +1,271 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+
+/ {
+	model = "NorthStar Plus SVK (BCM958625K)";
+	compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+};
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>, <&gpiobs>, <&pwmc>;
+
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+
+	gpiobs: gpiobs {
+		function = "gpio_b";
+		groups = "gpio_b_0_grp", "gpio_b_1_grp", "gpio_b_2_grp",
+			 "gpio_b_3_grp";
+	};
+
+	pwmc: pwmc {
+		function = "pwm";
+		groups = "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp";
+	};
+
+	emmc_sel: emmc_sel {
+		function = "emmc";
+		groups = "emmc_grp";
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+/*
+ * By default the sd slot is functional. For emmc to work add "<&emmc_sel>"
+ * and delete "<&nand_sel>" in "pinctrl-0" property of pinctrl node. Remove the
+ * bus-width property here and disable the nand node with status = "disabled";.
+ *
+ * Ex: pinctrl-0 = <&emmc_sel>, <&gpiobs>, <&pwmc>;
+ */
+&sdio {
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usb3_phy {
+	status = "okay";
+};
+
+&xhci {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138.dts b/arch/arm/boot/dts/bcm963138.dts
new file mode 100644
index 000000000000..1b405c249213
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963138.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63138.dtsi"
+
+/ {
+	model = "Broadcom BCM963138 Reference Board";
+	compatible = "brcm,bcm963138", "brcm,bcm63138", "brcm,bcmbca";
+
+	chosen {
+		bootargs = "console=ttyS0,115200";
+		stdout-path = &serial0;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963138dvt.dts b/arch/arm/boot/dts/bcm963138dvt.dts
index 370aa2cfddf2..b5af61853a07 100644
--- a/arch/arm/boot/dts/bcm963138dvt.dts
+++ b/arch/arm/boot/dts/bcm963138dvt.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Broadcom BCM63138 Reference Board DTS
  */
@@ -7,7 +8,7 @@
 #include "bcm63138.dtsi"
 
 / {
-	compatible = "brcm,BCM963138DVT", "brcm,bcm63138";
+	compatible = "brcm,BCM963138DVT", "brcm,bcm63138", "brcm,bcmbca";
 	model = "Broadcom BCM963138DVT";
 
 	chosen {
@@ -15,7 +16,8 @@
 		stdout-path = &serial0;
 	};
 
-	memory {
+	memory@0 {
+		device_type = "memory";
 		reg = <0x0 0x08000000>;
 	};
 
@@ -29,10 +31,10 @@
 	status = "okay";
 };
 
-&nand {
+&nand_controller {
 	status = "okay";
 
-	nandcs@0 {
+	nand@0 {
 		compatible = "brcm,nandcs";
 		reg = <0>;
 		nand-ecc-strength = <4>;
@@ -40,3 +42,15 @@
 		brcm,nand-oob-sectors-size = <16>;
 	};
 };
+
+&ahci {
+	status = "okay";
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963148.dts b/arch/arm/boot/dts/bcm963148.dts
new file mode 100644
index 000000000000..1f5d6d783f09
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963148.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63148.dtsi"
+
+/ {
+	model = "Broadcom BCM963148 Reference Board";
+	compatible = "brcm,bcm963148", "brcm,bcm63148", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm963178.dts b/arch/arm/boot/dts/bcm963178.dts
new file mode 100644
index 000000000000..d036e99dd8d1
--- /dev/null
+++ b/arch/arm/boot/dts/bcm963178.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm63178.dtsi"
+
+/ {
+	model = "Broadcom BCM963178 Reference Board";
+	compatible = "brcm,bcm963178", "brcm,bcm63178", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96756.dts b/arch/arm/boot/dts/bcm96756.dts
new file mode 100644
index 000000000000..8b104f3fb14a
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96756.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6756.dtsi"
+
+/ {
+	model = "Broadcom BCM96756 Reference Board";
+	compatible = "brcm,bcm96756", "brcm,bcm6756", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96846.dts b/arch/arm/boot/dts/bcm96846.dts
new file mode 100644
index 000000000000..55852c229608
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96846.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6846.dtsi"
+
+/ {
+	model = "Broadcom BCM96846 Reference Board";
+	compatible = "brcm,bcm96846", "brcm,bcm6846", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96855.dts b/arch/arm/boot/dts/bcm96855.dts
new file mode 100644
index 000000000000..2ad880af2104
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96855.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6855.dtsi"
+
+/ {
+	model = "Broadcom BCM96855 Reference Board";
+	compatible = "brcm,bcm96855", "brcm,bcm6855", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
new file mode 100644
index 000000000000..b7af8ade7a9d
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96878.dts
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&hsspi {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
new file mode 100644
index 000000000000..e96bc3f2d5cf
--- /dev/null
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -0,0 +1,231 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2016 Broadcom.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-nsp.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "NorthStar Plus SVK (BCM988312HR)";
+	compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@60000000 {
+		device_type = "memory";
+		reg = <0x60000000 0x80000000>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+		open-source;
+		priority = <200>;
+	};
+};
+
+/* USB 3 support needed to be complete */
+
+&dma {
+	status = "okay";
+};
+
+&amac0 {
+	status = "okay";
+};
+
+&amac1 {
+	status = "okay";
+};
+
+&amac2 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&nand_controller {
+	nand@0 {
+		compatible = "brcm,nandcs";
+		reg = <0>;
+		nand-on-flash-bbt;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		nand-ecc-strength = <24>;
+		nand-ecc-step-size = <1024>;
+
+		brcm,nand-oob-sector-size = <27>;
+
+		partition@0 {
+			label = "nboot";
+			reg = <0x00000000 0x00200000>;
+			read-only;
+		};
+		partition@200000 {
+			label = "nenv";
+			reg = <0x00200000 0x00400000>;
+		};
+		partition@600000 {
+			label = "nsystem";
+			reg = <0x00600000 0x00a00000>;
+		};
+		partition@1000000 {
+			label = "nrootfs";
+			reg = <0x01000000 0x03000000>;
+		};
+		partition@4000000 {
+			label = "ncustfs";
+			reg = <0x04000000 0x3c000000>;
+		};
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_sel>;
+	nand_sel: nand_sel {
+		function = "nand";
+		groups = "nand_grp";
+	};
+};
+
+&qspi {
+	status = "okay";
+	bspi-sel = <0>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80";
+		reg = <0x0>;
+		spi-max-frequency = <12500000>;
+		m25p,fast-read;
+		spi-cpol;
+		spi-cpha;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x000a0000>;
+		};
+
+		partition@a0000 {
+			label = "env";
+			reg = <0x000a0000 0x00060000>;
+		};
+
+		partition@100000 {
+			label = "system";
+			reg = <0x00100000 0x00600000>;
+		};
+
+		partition@700000 {
+			label = "rootfs";
+			reg = <0x00700000 0x01900000>;
+		};
+	};
+};
+
+&sata_phy0 {
+	status = "okay";
+};
+
+&sata_phy1 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&srab {
+	compatible = "brcm,bcm88312-srab", "brcm,nsp-srab";
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "port0";
+			reg = <0>;
+		};
+
+		port@1 {
+			label = "port1";
+			reg = <1>;
+		};
+
+		port@2 {
+			label = "port2";
+			reg = <2>;
+		};
+
+		port@3 {
+			label = "port3";
+			reg = <3>;
+		};
+
+		port@4 {
+			label = "port4";
+			reg = <4>;
+		};
+
+		port@8 {
+			ethernet = <&amac2>;
+			label = "cpu";
+			reg = <8>;
+			fixed-link {
+				speed = <1000>;
+				full-duplex;
+			};
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi
new file mode 100644
index 000000000000..65397c088335
--- /dev/null
+++ b/arch/arm/boot/dts/bcm9hmidc.dtsi
@@ -0,0 +1,42 @@
+/*
+ *  BSD LICENSE
+ *
+ *  Copyright(c) 2015 Broadcom Corporation.  All rights reserved.
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *    * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *    * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in
+ *      the documentation and/or other materials provided with the
+ *      distribution.
+ *    * Neither the name of Broadcom Corporation nor the names of its
+ *      contributors may be used to endorse or promote products derived
+ *      from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Broadcom human machine interface daughter card (bcm9hmidc) installed on
+ * bcm958300k/bcm958305k boards
+ */
+
+&touchscreen {
+	touchscreen-inverted-x;
+	touchscreen-inverted-y;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
index 5c99fb3a4d10..64a297759eb9 100644
--- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
+++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts
@@ -1,39 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for Sony NSZ-GS7
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -45,10 +14,11 @@
 	compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index ef811de09908..1114c592e461 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 1500 (Berlin BG2) SoC
  *
@@ -5,47 +6,22 @@
  *
  * based on GPL'ed 2.6 kernel sources
  *  (c) Marvell International Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500 (BG2) SoC";
 	compatible = "marvell,berlin2", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
 
 	cpus {
 		#address-cells = <1>;
@@ -57,6 +33,16 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
 		cpu@1 {
@@ -64,6 +50,16 @@
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <1>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 	};
 
@@ -73,7 +69,7 @@
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -81,7 +77,7 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
-		sdhci0: sdhci@ab0000 {
+		sdhci0: mmc@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
 			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
@@ -90,7 +86,7 @@
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@ab0800 {
+		sdhci1: mmc@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
 			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
@@ -99,7 +95,7 @@
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@ab1000 {
+		sdhci2: mmc@ab1000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
@@ -110,7 +106,7 @@
 			status = "disabled";
 		};
 
-		l2: l2-cache-controller@ac0000 {
+		l2: cache-controller@ac0000 {
 			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
 			cache-unified;
@@ -132,7 +128,7 @@
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&chip_clk CLKID_TWD>;
 		};
 
@@ -185,7 +181,7 @@
 			ranges = <0 0xe80000 0x10000>;
 			interrupt-parent = <&aic>;
 
-			gpio0: gpio@0400 {
+			gpio0: gpio@400 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0400 0x400>;
 				#address-cells = <1>;
@@ -195,7 +191,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -203,7 +199,7 @@
 				};
 			};
 
-			gpio1: gpio@0800 {
+			gpio1: gpio@800 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0800 0x400>;
 				#address-cells = <1>;
@@ -213,7 +209,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -221,7 +217,7 @@
 				};
 			};
 
-			gpio2: gpio@0c00 {
+			gpio2: gpio@c00 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0c00 0x400>;
 				#address-cells = <1>;
@@ -231,7 +227,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -249,7 +245,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -404,6 +400,13 @@
 			};
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -412,6 +415,27 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
@@ -422,7 +446,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 				};
 			};
@@ -437,7 +461,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
index 772165ad0a52..c1d91424e658 100644
--- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
+++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts
@@ -1,39 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree file for Google Chromecast
  *
  * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -46,27 +15,41 @@
 	compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+
+		/*
+		 * We're using "linux,usable-memory" instead of "reg" here
+		 * because the (signed and encrypted) bootloader that shipped
+		 * with this device provides an incorrect memory range in
+		 * ATAG_MEM. Linux helpfully overrides the "reg" property with
+		 * data from the ATAG, so we can't specify the proper range
+		 * normally. Fortunately, this alternate property is checked
+		 * first by the OF driver, so we can (ab)use it instead.
+		 */
+		linux,usable-memory = <0x00000000 0x20000000>; /* 512 MB */
 	};
 
-	leds {
-		compatible = "gpio-leds";
+	led-controller {
+		compatible = "pwm-leds";
+		pinctrl-0 = <&ledpwm_pmux>;
+		pinctrl-names = "default";
 
-		white {
+		led-1 {
 			label = "white";
-			gpios = <&portc 1 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
+			pwms = <&pwm 0 600000 0>;
+			max-brightness = <255>;
+			linux,default-trigger = "default-on";
 		};
 
-		red {
+		led-2 {
 			label = "red";
-			gpios = <&portc 2 GPIO_ACTIVE_HIGH>;
-			default-state = "keep";
+			pwms = <&pwm 1 600000 0>;
+			max-brightness = <255>;
 		};
 	};
 };
@@ -85,3 +68,10 @@
 &usb_phy1 { status = "okay"; };
 
 &usb1 { status = "okay"; };
+
+&soc_pinctrl {
+	ledpwm_pmux: ledpwm-pmux {
+		groups = "G0";
+		function = "pwm";
+	};
+};
diff --git a/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
new file mode 100644
index 000000000000..79ac842ae461
--- /dev/null
+++ b/arch/arm/boot/dts/berlin2cd-valve-steamlink.dts
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2018 Alexander Monakov <amonakov@gmail.com>
+ */
+/dts-v1/;
+
+#include "berlin2cd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Valve Steam Link";
+	compatible = "valve,steamlink", "marvell,berlin2cd", "marvell,berlin";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>; /* 512 MB */
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		active-delay = <100>;
+		inactive-delay = <10>;
+		wait-delay = <100>;
+		priority = <200>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&vcpu>;
+	operating-points = <
+		/* kHz    uV */
+		1000000 1325000
+	>;
+};
+
+&i2c0 {
+	status = "okay";
+
+	/* There are two regulators on the board. One is accessible via I2C,
+	 * with buck1 providing SoC power (set up by bootloader to 1.325V or
+	 * less depending on leakage value in OTP), and buck2 likely used for
+	 * DRAM (providing 1.35V). The other regulator on the opposite side
+	 * of the board is probably supplying SDIO and NAND fixed voltages. */
+	regulator@19 {
+		compatible = "marvell,88pg868";
+		reg = <0x19>;
+
+		vcpu: buck1 {
+			regulator-boot-on;
+			regulator-always-on;
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1325000>;
+		};
+	};
+};
+
+/* Fixed interface to on-board Marvell 8897 Wi-Fi/Bluetooth/NFC chip. */
+&sdhci0 {
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&uart0 {
+	/* RX/TX are routed to TP50/TP51 on the board. */
+	status = "okay";
+};
+
+/* The SoC is connected to on-board USB hub that in turn has one downstream
+ * port wired to the on-board Steam Controller wireless receiver chip. */
+&usb_phy1 { status = "okay"; };
+
+&usb1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&eth1 { status = "okay"; };
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 900213d78a32..b2768f7a3185 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Device Tree Include file for Marvell Armada 1500-mini (Berlin BG2CD) SoC
  *
@@ -5,67 +6,55 @@
  *
  * based on GPL'ed 2.6 kernel sources
  *  (c) Marvell International Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/berlin2.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Marvell Armada 1500-mini (BG2CD) SoC";
 	compatible = "marvell,berlin2cd", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			operating-points = <
+				/* kHz    uV */
+				800000  1200000
+				600000  1200000
+			>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
 	refclk: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -73,12 +62,7 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sdhci0: sdhci@ab0000 {
+		sdhci0: mmc@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
 			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
@@ -87,13 +71,18 @@
 			status = "disabled";
 		};
 
-		l2: l2-cache-controller@ac0000 {
+		l2: cache-controller@ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
+		snoop-control-unit@ad0000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0xad0000 0x100>;
+		};
+
 		gic: interrupt-controller@ad1000 {
 			compatible = "arm,cortex-a9-gic";
 			reg = <0xad1000 0x1000>, <0xad0100 0x0100>;
@@ -101,10 +90,24 @@
 			#interrupt-cells = <3>;
 		};
 
+		global-timer@ad0200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0xad0200 0x20>;
+			interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&chip_clk CLKID_TWD>;
+		};
+
 		local-timer@ad0600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
+			clocks = <&chip_clk CLKID_TWD>;
+		};
+
+		local-wdt@ad0620 {
+			compatible = "arm,cortex-a9-twd-wdt";
+			reg = <0xad0620 0x20>;
+			interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_EDGE_RISING)>;
 			clocks = <&chip_clk CLKID_TWD>;
 		};
 
@@ -168,7 +171,7 @@
 			ranges = <0 0xe80000 0x10000>;
 			interrupt-parent = <&aic>;
 
-			gpio0: gpio@0400 {
+			gpio0: gpio@400 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0400 0x400>;
 				#address-cells = <1>;
@@ -178,7 +181,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -186,7 +189,7 @@
 				};
 			};
 
-			gpio1: gpio@0800 {
+			gpio1: gpio@800 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0800 0x400>;
 				#address-cells = <1>;
@@ -196,7 +199,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -204,7 +207,7 @@
 				};
 			};
 
-			gpio2: gpio@0c00 {
+			gpio2: gpio@c00 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0c00 0x400>;
 				#address-cells = <1>;
@@ -214,7 +217,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -232,7 +235,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -240,6 +243,60 @@
 				};
 			};
 
+			i2c0: i2c@1400 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1400 0x100>;
+				interrupts = <16>;
+				clocks = <&chip_clk CLKID_CFG>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@1800 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1800 0x100>;
+				interrupts = <17>;
+				clocks = <&chip_clk CLKID_CFG>;
+				status = "disabled";
+			};
+
+			spi0: spi@1c00 {
+				compatible = "snps,dw-apb-ssi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x1c00 0x100>;
+				interrupts = <4>;
+				clocks = <&chip_clk CLKID_CFG>;
+				status = "disabled";
+			};
+
+			wdt4: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&chip_clk CLKID_CFG>;
+				interrupts = <5>;
+				status = "disabled";
+			};
+
+			wdt5: watchdog@2400 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2400 0x100>;
+				clocks = <&chip_clk CLKID_CFG>;
+				interrupts = <6>;
+				status = "disabled";
+			};
+
+			wdt6: watchdog@2800 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2800 0x100>;
+				clocks = <&chip_clk CLKID_CFG>;
+				interrupts = <7>;
+				status = "disabled";
+			};
+
 			timer0: timer@2c00 {
 				compatible = "snps,dw-apb-timer";
 				reg = <0x2c00 0x14>;
@@ -368,6 +425,13 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -376,6 +440,29 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+				status = "disabled";
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
@@ -386,11 +473,41 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 				};
 			};
 
+			spi1: spi@6000 {
+				compatible = "snps,dw-apb-ssi";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x6000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <5>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@7000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x7000 0x100>;
+				interrupts = <6>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@8000 {
+				compatible = "snps,designware-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x8000 0x100>;
+				interrupts = <7>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
 			sm_gpio0: gpio@c000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0xc000 0x400>;
@@ -401,7 +518,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <8>;
+					ngpios = <8>;
 					reg = <0>;
 				};
 			};
@@ -428,6 +545,16 @@
 				status = "disabled";
 			};
 
+			uart2: serial@b000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0xb000 0x100>;
+				reg-shift = <2>;
+				reg-io-width = <1>;
+				interrupts = <10>;
+				clocks = <&refclk>;
+				status = "disabled";
+			};
+
 			sysctrl: system-controller@d000 {
 				compatible = "simple-mfd", "syscon";
 				reg = <0xd000 0x100>;
@@ -435,6 +562,12 @@
 				sys_pinctrl: pin-controller {
 					compatible = "marvell,berlin2cd-system-pinctrl";
 				};
+
+				adc: adc {
+					compatible = "marvell,berlin2-adc";
+					interrupts = <12>, <14>;
+					interrupt-names = "adc", "tsen";
+				};
 			};
 
 			sic: interrupt-controller@e000 {
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 4a749e5b3b44..c162f98cb8e8 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -1,37 +1,6 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -43,13 +12,14 @@
 	model = "Marvell BG2-Q DMP";
 	compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>;
 	};
 
-	choosen {
-		bootargs = "console=ttyS0,115200 earlyprintk";
+	chosen {
+		bootargs = "earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	regulators {
@@ -57,7 +27,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		reg_usb0_vbus: regulator@0 {
+		reg_usb0_vbus: regulator_usb0 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb0_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -66,7 +36,7 @@
 			enable-active-high;
 		};
 
-		reg_usb1_vbus: regulator@1 {
+		reg_usb1_vbus: regulator_usb1 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb1_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -75,7 +45,7 @@
 			enable-active-high;
 		};
 
-		reg_usb2_vbus: regulator@2 {
+		reg_usb2_vbus: regulator_usb2 {
 			compatible = "regulator-fixed";
 			regulator-name = "usb2_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -83,17 +53,49 @@
 			gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
 			enable-active-high;
 		};
+
+		reg_sdio1_vmmc: regulator_sdio1_vmmc {
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vmmc";
+			enable-active-high;
+			regulator-boot-on;
+			gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_sdio1_vqmmc: regulator_sido1_vqmmc {
+			compatible = "regulator-gpio";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-name = "sdio1_vqmmc";
+			regulator-type = "voltage";
+			enable-active-high;
+			gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
+			states = <3300000 0x1
+				  1800000 0x0>;
+		};
+	};
+};
+
+&soc_pinctrl {
+	sd1gpio_pmux: sd1pwr-pmux {
+		groups = "G23", "G32";
+		function = "gpio";
 	};
 };
 
 &sdhci1 {
-	broken-cd;
-	sdhci,wp-inverted;
+	vmmc-supply = <&reg_sdio1_vmmc>;
+	vqmmc-supply = <&reg_sdio1_vqmmc>;
+	cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
 &sdhci2 {
-	broken-cd;
 	bus-width = <8>;
 	non-removable;
 	status = "okay";
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 63a48490e2f9..6edaefa617a5 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -1,89 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
 /*
  * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2. This program is licensed "as is" without any
- *     warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include <dt-bindings/clock/berlin2q.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-#include "skeleton.dtsi"
-
 / {
 	model = "Marvell Armada 1500 pro (BG2-Q) SoC";
 	compatible = "marvell,berlin2q", "marvell,berlin";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		enable-method = "marvell,berlin-smp";
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <0>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <1>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <2>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			next-level-cache = <&l2>;
 			reg = <3>;
+
+			clocks = <&chip_clk CLKID_CPU>;
+			clock-latency = <100000>;
+			/* Can be modified by the bootloader */
+			operating-points = <
+				/* kHz    uV */
+				1200000 1200000
+				1000000 1200000
+				800000  1200000
+				600000  1200000
+			>;
 		};
 	};
 
+	pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
 	refclk: oscillator {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 
-	soc {
+	soc@f7000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,42 +122,37 @@
 		ranges = <0 0xf7000000 0x1000000>;
 		interrupt-parent = <&gic>;
 
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-		};
-
-		sdhci0: sdhci@ab0000 {
+		sdhci0: mmc@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
 			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@ab0800 {
+		sdhci1: mmc@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
-			clocks = <&chip_clk CLKID_SDIO1XIN>;
+			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+			clock-names = "io", "core";
 			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@ab1000 {
+		sdhci2: mmc@ab1000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
+			clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
 			clock-names = "io", "core";
 			status = "disabled";
 		};
 
-		l2: l2-cache-controller@ac0000 {
+		l2: cache-controller@ac0000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xac0000 0x1000>;
+			cache-unified;
 			cache-level = <2>;
 			arm,data-latency = <2 2 2>;
 			arm,tag-latency = <2 2 2>;
@@ -141,7 +167,7 @@
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0xad0600 0x20>;
 			clocks = <&chip_clk CLKID_TWD>;
-			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
 		};
 
 		gic: interrupt-controller@ad1000 {
@@ -152,7 +178,7 @@
 		};
 
 		usb_phy2: phy@a2f400 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xa2f400 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 14>;
@@ -170,7 +196,7 @@
 		};
 
 		usb_phy0: phy@b74000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb74000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 12>;
@@ -178,7 +204,7 @@
 		};
 
 		usb_phy1: phy@b78000 {
-			compatible = "marvell,berlin2-usb-phy";
+			compatible = "marvell,berlin2cd-usb-phy";
 			reg = <0xb78000 0x128>;
 			#phy-cells = <0>;
 			resets = <&chip_rst 0x104 13>;
@@ -216,7 +242,7 @@
 			ranges = <0 0xe80000 0x10000>;
 			interrupt-parent = <&aic>;
 
-			gpio0: gpio@0400 {
+			gpio0: gpio@400 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0400 0x400>;
 				#address-cells = <1>;
@@ -226,7 +252,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
+					ngpios = <32>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -234,7 +260,7 @@
 				};
 			};
 
-			gpio1: gpio@0800 {
+			gpio1: gpio@800 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0800 0x400>;
 				#address-cells = <1>;
@@ -244,7 +270,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
+					ngpios = <32>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -252,7 +278,7 @@
 				};
 			};
 
-			gpio2: gpio@0c00 {
+			gpio2: gpio@c00 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x0c00 0x400>;
 				#address-cells = <1>;
@@ -262,7 +288,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
+					ngpios = <32>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -280,7 +306,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
+					ngpios = <32>;
 					reg = <0>;
 					interrupt-controller;
 					#interrupt-cells = <2>;
@@ -293,7 +319,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1400 0x100>;
-				interrupt-parent = <&aic>;
 				interrupts = <4>;
 				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi0_pmux>;
@@ -306,7 +331,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x1800 0x100>;
-				interrupt-parent = <&aic>;
 				interrupts = <5>;
 				clocks = <&chip_clk CLKID_CFG>;
 				pinctrl-0 = <&twsi1_pmux>;
@@ -401,6 +425,11 @@
 			soc_pinctrl: pin-controller {
 				compatible = "marvell,berlin2q-soc-pinctrl";
 
+				sd1_pmux: sd1-pmux {
+					groups = "G31";
+					function = "sd1";
+				};
+
 				twsi0_pmux: twsi0-pmux {
 					groups = "G6";
 					function = "twsi0";
@@ -477,6 +506,13 @@
 			status = "disabled";
 		};
 
+		pwm: pwm@f20000 {
+			compatible = "marvell,berlin-pwm";
+			reg = <0xf20000 0x40>;
+			clocks = <&chip_clk CLKID_CFG>;
+			#pwm-cells = <3>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -485,6 +521,27 @@
 			ranges = <0 0xfc0000 0x10000>;
 			interrupt-parent = <&sic>;
 
+			wdt0: watchdog@1000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x1000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <0>;
+			};
+
+			wdt1: watchdog@2000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x2000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <1>;
+			};
+
+			wdt2: watchdog@3000 {
+				compatible = "snps,dw-wdt";
+				reg = <0x3000 0x100>;
+				clocks = <&refclk>;
+				interrupts = <2>;
+			};
+
 			sm_gpio1: gpio@5000 {
 				compatible = "snps,dw-apb-gpio";
 				reg = <0x5000 0x400>;
@@ -495,7 +552,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
+					ngpios = <32>;
 					reg = <0>;
 				};
 			};
@@ -505,7 +562,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x7000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <6>;
 				clocks = <&refclk>;
 				pinctrl-0 = <&twsi2_pmux>;
@@ -518,7 +574,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x8000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <7>;
 				clocks = <&refclk>;
 				pinctrl-0 = <&twsi3_pmux>;
@@ -526,10 +581,9 @@
 				status = "disabled";
 			};
 
-			uart0: uart@9000 {
+			uart0: serial@9000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x9000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <8>;
 				clocks = <&refclk>;
 				reg-shift = <2>;
@@ -538,10 +592,9 @@
 				status = "disabled";
 			};
 
-			uart1: uart@a000 {
+			uart1: serial@a000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0xa000 0x100>;
-				interrupt-parent = <&sic>;
 				interrupts = <9>;
 				clocks = <&refclk>;
 				reg-shift = <2>;
@@ -560,7 +613,7 @@
 					compatible = "snps,dw-apb-gpio-port";
 					gpio-controller;
 					#gpio-cells = <2>;
-					snps,nr-gpios = <32>;
+					ngpios = <32>;
 					reg = <0>;
 				};
 			};
diff --git a/arch/arm/boot/dts/compulab-sb-som.dtsi b/arch/arm/boot/dts/compulab-sb-som.dtsi
new file mode 100644
index 000000000000..f5e6216718d8
--- /dev/null
+++ b/arch/arm/boot/dts/compulab-sb-som.dtsi
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/
+ */
+
+/ {
+	model = "CompuLab SB-SOM";
+	compatible = "compulab,sb-som";
+
+	vsb_3v3: fixedregulator-v3_3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsb_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		enable-active-high;
+	};
+
+	lcd0: display {
+		compatible = "startek,startek-kd050c", "panel-dpi";
+		label = "lcd";
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <40>;
+			hback-porch = <40>;
+			hsync-len = <43>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			vsync-len = <3>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+	};
+
+	hdmi_conn: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+	};
+};
diff --git a/arch/arm/boot/dts/cros-adc-thermistors.dtsi b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
index acd4fe1833f2..97e616f7b841 100644
--- a/arch/arm/boot/dts/cros-adc-thermistors.dtsi
+++ b/arch/arm/boot/dts/cros-adc-thermistors.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Thermistor dts fragment for devices that use Thermistors as
  * children of the IIO based ADC.
@@ -6,35 +7,31 @@
  * Exynos5800 based Peach PI.
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 
 &adc {
-	ncp15wb473@3 {
+	thermistor3 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 3>;
 	};
-	ncp15wb473@4 {
+	thermistor4 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 4>;
 	};
-	ncp15wb473@5 {
+	thermistor5 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
 		io-channels = <&adc 5>;
 	};
-	ncp15wb473@6 {
+	thermistor6 {
 		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
index 9c7fb0acae79..55c4744fa7e7 100644
--- a/arch/arm/boot/dts/cros-ec-keyboard.dtsi
+++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi
@@ -1,105 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Keyboard dts fragment for devices that use cros-ec-keyboard
  *
  * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
 */
 
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/input/cros-ec-keyboard.h>
 
 &cros_ec {
-	keyboard-controller {
+	keyboard_controller: keyboard-controller {
 		compatible = "google,cros-ec-keyb";
 		keypad,num-rows = <8>;
 		keypad,num-columns = <13>;
 		google,needs-ghost-filter;
 
 		linux,keymap = <
-			MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA)
-			MATRIX_KEY(0x00, 0x02, KEY_F1)
-			MATRIX_KEY(0x00, 0x03, KEY_B)
-			MATRIX_KEY(0x00, 0x04, KEY_F10)
-			MATRIX_KEY(0x00, 0x06, KEY_N)
-			MATRIX_KEY(0x00, 0x08, KEY_EQUAL)
-			MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT)
-
-			MATRIX_KEY(0x01, 0x01, KEY_ESC)
-			MATRIX_KEY(0x01, 0x02, KEY_F4)
-			MATRIX_KEY(0x01, 0x03, KEY_G)
-			MATRIX_KEY(0x01, 0x04, KEY_F7)
-			MATRIX_KEY(0x01, 0x06, KEY_H)
-			MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE)
-			MATRIX_KEY(0x01, 0x09, KEY_F9)
-			MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE)
-
-			MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL)
-			MATRIX_KEY(0x02, 0x01, KEY_TAB)
-			MATRIX_KEY(0x02, 0x02, KEY_F3)
-			MATRIX_KEY(0x02, 0x03, KEY_T)
-			MATRIX_KEY(0x02, 0x04, KEY_F6)
-			MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE)
-			MATRIX_KEY(0x02, 0x06, KEY_Y)
-			MATRIX_KEY(0x02, 0x07, KEY_102ND)
-			MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE)
-			MATRIX_KEY(0x02, 0x09, KEY_F8)
-
-			MATRIX_KEY(0x03, 0x01, KEY_GRAVE)
-			MATRIX_KEY(0x03, 0x02, KEY_F2)
-			MATRIX_KEY(0x03, 0x03, KEY_5)
-			MATRIX_KEY(0x03, 0x04, KEY_F5)
-			MATRIX_KEY(0x03, 0x06, KEY_6)
-			MATRIX_KEY(0x03, 0x08, KEY_MINUS)
-			MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH)
-
-			MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL)
-			MATRIX_KEY(0x04, 0x01, KEY_A)
-			MATRIX_KEY(0x04, 0x02, KEY_D)
-			MATRIX_KEY(0x04, 0x03, KEY_F)
-			MATRIX_KEY(0x04, 0x04, KEY_S)
-			MATRIX_KEY(0x04, 0x05, KEY_K)
-			MATRIX_KEY(0x04, 0x06, KEY_J)
-			MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON)
-			MATRIX_KEY(0x04, 0x09, KEY_L)
-			MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH)
-			MATRIX_KEY(0x04, 0x0b, KEY_ENTER)
-
-			MATRIX_KEY(0x05, 0x01, KEY_Z)
-			MATRIX_KEY(0x05, 0x02, KEY_C)
-			MATRIX_KEY(0x05, 0x03, KEY_V)
-			MATRIX_KEY(0x05, 0x04, KEY_X)
-			MATRIX_KEY(0x05, 0x05, KEY_COMMA)
-			MATRIX_KEY(0x05, 0x06, KEY_M)
-			MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT)
-			MATRIX_KEY(0x05, 0x08, KEY_SLASH)
-			MATRIX_KEY(0x05, 0x09, KEY_DOT)
-			MATRIX_KEY(0x05, 0x0b, KEY_SPACE)
-
-			MATRIX_KEY(0x06, 0x01, KEY_1)
-			MATRIX_KEY(0x06, 0x02, KEY_3)
-			MATRIX_KEY(0x06, 0x03, KEY_4)
-			MATRIX_KEY(0x06, 0x04, KEY_2)
-			MATRIX_KEY(0x06, 0x05, KEY_8)
-			MATRIX_KEY(0x06, 0x06, KEY_7)
-			MATRIX_KEY(0x06, 0x08, KEY_0)
-			MATRIX_KEY(0x06, 0x09, KEY_9)
-			MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT)
-			MATRIX_KEY(0x06, 0x0b, KEY_DOWN)
-			MATRIX_KEY(0x06, 0x0c, KEY_RIGHT)
-
-			MATRIX_KEY(0x07, 0x01, KEY_Q)
-			MATRIX_KEY(0x07, 0x02, KEY_E)
-			MATRIX_KEY(0x07, 0x03, KEY_R)
-			MATRIX_KEY(0x07, 0x04, KEY_W)
-			MATRIX_KEY(0x07, 0x05, KEY_I)
-			MATRIX_KEY(0x07, 0x06, KEY_U)
-			MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT)
-			MATRIX_KEY(0x07, 0x08, KEY_P)
-			MATRIX_KEY(0x07, 0x09, KEY_O)
-			MATRIX_KEY(0x07, 0x0b, KEY_UP)
-			MATRIX_KEY(0x07, 0x0c, KEY_LEFT)
+			CROS_STD_TOP_ROW_KEYMAP
+			CROS_STD_MAIN_KEYMAP
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/cros-ec-sbs.dtsi b/arch/arm/boot/dts/cros-ec-sbs.dtsi
new file mode 100644
index 000000000000..71f5c5ecce46
--- /dev/null
+++ b/arch/arm/boot/dts/cros-ec-sbs.dtsi
@@ -0,0 +1,52 @@
+/*
+ * Smart battery dts fragment for devices that use cros-ec-sbs
+ *
+ * Copyright (c) 2015 Google, Inc
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&i2c_tunnel {
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0xb>;
+		sbs,i2c-retry-count = <2>;
+		sbs,poll-retry-count = <1>;
+	};
+};
diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi
index af333261d046..227675fbe820 100644
--- a/arch/arm/boot/dts/cx92755.dtsi
+++ b/arch/arm/boot/dts/cx92755.dtsi
@@ -44,9 +44,9 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include "skeleton.dtsi"
-
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "cnxt,cx92755";
 
 	interrupt-parent = <&intc>;
@@ -88,12 +88,26 @@
 		interrupts = <25>;
 	};
 
+	watchdog@f0000fc0 {
+		compatible = "cnxt,cx92755-wdt";
+		reg = <0xf0000fc0 0x8>;
+		clocks = <&main_clk>;
+		timeout-sec = <15>;
+	};
+
+	pinctrl: pinctrl@f0000e20 {
+		compatible = "cnxt,cx92755-pinctrl";
+		reg = <0xf0000e20 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
 	uc_regs: syscon@f00003a0 {
 		compatible = "cnxt,cx92755-uc", "syscon";
 		reg = <0xf00003a0 0x10>;
 	};
 
-	uart0: uart@f0000740 {
+	uart0: serial@f0000740 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000740 0x20>;
 		clocks = <&main_clk>;
@@ -101,7 +115,7 @@
 		status = "disabled";
 	};
 
-	uart1: uart@f0000760 {
+	uart1: serial@f0000760 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000760 0x20>;
 		clocks = <&main_clk>;
@@ -109,7 +123,7 @@
 		status = "disabled";
 	};
 
-	uart2: uart@f0000780 {
+	uart2: serial@f0000780 {
 		compatible = "cnxt,cx92755-usart";
 		reg = <0xf0000780 0x20>;
 		clocks = <&main_clk>;
diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts
index 90d52cc416dc..026f556c8c50 100644
--- a/arch/arm/boot/dts/cx92755_equinox.dts
+++ b/arch/arm/boot/dts/cx92755_equinox.dts
@@ -64,15 +64,23 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
-		stdout-path = &uart0;
+		stdout-path = "serial0:115200n8";
 	};
 };
 
 &uart0 {
 	status = "okay";
+	pinctrl-0 = <&uart0_default>;
+	pinctrl-names = "default";
 };
 
 &i2c {
 	status = "okay";
 };
+
+&pinctrl {
+	uart0_default: uart0_active {
+		pins = "GP_O0", "GP_O1";
+		function = "client_b";
+	};
+};
diff --git a/arch/arm/boot/dts/da850-enbw-cmc.dts b/arch/arm/boot/dts/da850-enbw-cmc.dts
index e750ab9086d5..d4a5237cee0a 100644
--- a/arch/arm/boot/dts/da850-enbw-cmc.dts
+++ b/arch/arm/boot/dts/da850-enbw-cmc.dts
@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Device Tree for AM1808 EnBW CMC board
  *
  * Copyright 2012 DENX Software Engineering GmbH
  * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 /dts-v1/;
 #include "da850.dtsi"
@@ -16,15 +12,33 @@
 	compatible = "enbw,cmc", "ti,da850";
 	model = "EnBW CMC";
 
-	soc {
-		serial0: serial@1c42000 {
+	soc@1c00000 {
+		serial0: serial@42000 {
+			status = "okay";
+		};
+		serial1: serial@10c000 {
 			status = "okay";
 		};
-		serial1: serial@1d0c000 {
+		serial2: serial@10d000 {
 			status = "okay";
 		};
-		serial2: serial@1d0d000 {
+		mdio: mdio@224000 {
+			status = "okay";
+		};
+		eth0: ethernet@220000 {
 			status = "okay";
 		};
 	};
 };
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 4f935ad9f27b..0ca849885d1f 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -1,142 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree for DA850 EVM board
  *
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation, version 2.
+ * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 #include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	compatible = "ti,da850-evm", "ti,da850";
 	model = "DA850/AM1808/OMAP-L138 EVM";
 
-	soc {
-		pmx_core: pinmux@1c14120 {
-			status = "okay";
-
-			mcasp0_pins: pinmux_mcasp0_pins {
-				pinctrl-single,bits = <
-					/*
-					 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
-					 * AFSR, AMUTE
-					 */
-					0x00 0x11111111 0xffffffff
-					/* AXR11, AXR12 */
-					0x04 0x00011000 0x000ff000
-				>;
-			};
-		};
-		serial0: serial@1c42000 {
-			status = "okay";
-		};
-		serial1: serial@1d0c000 {
-			status = "okay";
-		};
-		serial2: serial@1d0d000 {
-			status = "okay";
-		};
-		rtc0: rtc@1c23000 {
-			status = "okay";
-		};
-		i2c0: i2c@1c22000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_pins>;
+	chosen {
+		stdout-path = &serial2;
+	};
 
-			tps: tps@48 {
-				reg = <0x48>;
-			};
-			tlv320aic3106: tlv320aic3106@18 {
-				#sound-dai-cells = <0>;
-				compatible = "ti,tlv320aic3106";
-				reg = <0x18>;
-				status = "okay";
-
-				/* Regulators */
-				IOVDD-supply = <&vdcdc2_reg>;
-				/* Derived from VBAT: Baseboard 3.3V / 1.8V */
-				AVDD-supply = <&vbat>;
-				DRVDD-supply = <&vbat>;
-				DVDD-supply = <&vbat>;
-			};
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+		spi0 = &spi1;
+	};
+
+	backlight: backlight-pwm {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>;
+		power-supply = <&backlight_lcd>;
+		compatible = "pwm-backlight";
+		/*
+		 * The PWM here corresponds to production hardware. The
+		 * schematic needs to be 1015171 (15 March 2010), Rev A
+		 * or newer.
+		 */
+		pwms = <&ecap2 0 50000 0>;
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
+		default-brightness-level = <7>;
+	};
 
+	panel {
+		compatible = "ti,tilcdc,panel";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+		/*
+		 * The vpif and the LCD are mutually exclusive.
+		 * To enable VPIF, change the status below to 'disabled' then
+		 * then change the status of the vpif below to 'okay'
+		 */
+		status = "okay";
+		enable-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>; /* lcd_panel_pwr */
+
+		panel-info {
+			ac-bias = <255>;
+			ac-bias-intrpt = <0>;
+			dma-burst-sz = <16>;
+			bpp = <16>;
+			fdd = <0x80>;
+			sync-edge = <0>;
+			sync-ctrl = <1>;
+			raster-order = <0>;
+			fifo-th = <0>;
 		};
-		wdt: wdt@1c21000 {
-			status = "okay";
-		};
-		mmc0: mmc@1c40000 {
-			max-frequency = <50000000>;
-			bus-width = <4>;
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mmc0_pins>;
-		};
-		spi1: spi@1f0e000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
-			flash: m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "m25p64";
-				spi-max-frequency = <30000000>;
-				reg = <0>;
-				partition@0 {
-					label = "U-Boot-SPL";
-					reg = <0x00000000 0x00010000>;
-					read-only;
-				};
-				partition@1 {
-					label = "U-Boot";
-					reg = <0x00010000 0x00080000>;
-					read-only;
-				};
-				partition@2 {
-					label = "U-Boot-Env";
-					reg = <0x00090000 0x00010000>;
-					read-only;
-				};
-				partition@3 {
-					label = "Kernel";
-					reg = <0x000a0000 0x00280000>;
-				};
-				partition@4 {
-					label = "Filesystem";
-					reg = <0x00320000 0x00400000>;
-				};
-				partition@5 {
-					label = "MAC-Address";
-					reg = <0x007f0000 0x00010000>;
-					read-only;
-				};
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 480x272 {
+				clock-frequency = <9000000>;
+				hactive = <480>;
+				vactive = <272>;
+				hfront-porch = <3>;
+				hback-porch = <2>;
+				hsync-len = <42>;
+				vback-porch = <3>;
+				vfront-porch = <4>;
+				vsync-len = <11>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
 			};
 		};
-		mdio: mdio@1e24000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mdio_pins>;
-			bus_freq = <2200000>;
-		};
-		eth0: ethernet@1e20000 {
-			status = "okay";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mii_pins>;
-		};
-		gpio: gpio@1e26000 {
-			status = "okay";
-		};
 	};
-	nand_cs3@62000000 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&nand_cs3_pins>;
-	};
-	vbat: fixedregulator@0 {
+
+	vbat: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vbat";
 		regulator-min-microvolt = <5000000>;
@@ -144,9 +91,40 @@
 		regulator-boot-on;
 	};
 
+	baseboard_3v3: fixedregulator-3v3 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	baseboard_1v8: fixedregulator-1v8 {
+		/* TPS73701DCQ */
+		compatible = "regulator-fixed";
+		regulator-name = "baseboard_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vbat>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	backlight_lcd: backlight-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_backlight_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio 47 GPIO_ACTIVE_HIGH>; /* lcd_backlight_pwr */
+		enable-active-high;
+	};
+
 	sound {
 		compatible = "simple-audio-card";
-		simple-audio-card,name = "DA850/OMAP-L138 EVM";
+		simple-audio-card,name = "DA850-OMAPL138 EVM";
 		simple-audio-card,widgets =
 			"Line", "Line In",
 			"Line", "Line Out";
@@ -172,6 +150,189 @@
 	};
 };
 
+&ecap2 {
+	status = "okay";
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/*
+			 * AHCLKX, ACLKX, AFSX, AHCLKR, ACLKR,
+			 * AFSR, AMUTE
+			 */
+			0x00 0x11111111 0xffffffff
+			/* AXR11, AXR12 */
+			0x04 0x00011000 0x000ff000
+		>;
+	};
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[4], EMA_CS[3] */
+			0x1c 0x10110110  0xf0ff0ff0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&vdcdc3_reg>;
+};
+
+/*
+ * The standard da850-evm kits and SOM's are 375MHz so enable this operating
+ * point by default. Higher frequencies must be enabled for custom boards with
+ * other variants of the SoC.
+ */
+&opp_375 {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&serial2 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	tps: tps@48 {
+		reg = <0x48>;
+	};
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vdcdc2_reg>;
+		AVDD-supply = <&baseboard_3v3>;
+		DRVDD-supply = <&baseboard_3v3>;
+		DVDD-supply = <&baseboard_1v8>;
+	};
+	tca6416: gpio@20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+	tca6416_bb: gpio@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio 65 GPIO_ACTIVE_HIGH>;
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins &spi1_cs0_pin>;
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <30000000>;
+		m25p,fast-read;
+		reg = <0>;
+		partition@0 {
+			label = "U-Boot-SPL";
+			reg = <0x00000000 0x00010000>;
+			read-only;
+		};
+		partition@1 {
+			label = "U-Boot";
+			reg = <0x00010000 0x00080000>;
+			read-only;
+		};
+		partition@2 {
+			label = "U-Boot-Env";
+			reg = <0x00090000 0x00010000>;
+			read-only;
+		};
+		partition@3 {
+			label = "Kernel";
+			reg = <0x000a0000 0x00280000>;
+		};
+		partition@4 {
+			label = "Filesystem";
+			reg = <0x00320000 0x00400000>;
+		};
+		partition@5 {
+			label = "MAC-Address";
+			reg = <0x007f0000 0x00010000>;
+			read-only;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+};
+
+&eth0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+};
+
+&gpio {
+	status = "okay";
+};
+
 /include/ "tps6507x.dtsi"
 
 &tps {
@@ -242,3 +403,64 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&edma0 {
+	ti,edma-reserved-slot-ranges = <32 50>;
+};
+
+&edma1 {
+	ti,edma-reserved-slot-ranges = <32 90>;
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "okay";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+		};
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&vpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vpif_capture_pins>, <&vpif_display_pins>;
+	/*
+	 * The vpif and the LCD are mutually exclusive.
+	 * To enable VPIF, disable the ti,tilcdc,panel then
+	 * change the status below to 'okay'
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
new file mode 100644
index 000000000000..e379d6e7ad49
--- /dev/null
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -0,0 +1,425 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2016 BayLibre, Inc.
+ */
+/dts-v1/;
+#include "da850.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "DA850/AM1808/OMAP-L138 LCDK";
+	compatible = "ti,da850-lcdk", "ti,da850";
+
+	aliases {
+		serial2 = &serial2;
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@c0000000 {
+		/* 128 MB DDR2 SDRAM @ 0xc0000000 */
+		reg = <0xc0000000 0x08000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		dsp_memory_region: dsp-memory@c3000000 {
+			compatible = "shared-dma-pool";
+			reg = <0xc3000000 0x1000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vcc_5vd: fixedregulator-vcc_5vd {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5vd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	vcc_3v3d: fixedregulator-vcc_3v3d {
+		/* TPS650250 - VDCDC1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3d";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vcc_1v8d: fixedregulator-vcc_1v8d {
+		/* TPS650250 - VDCDC2 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8d";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_5vd>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DA850-OMAPL138 LCDK";
+		simple-audio-card,widgets =
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack";
+		simple-audio-card,routing =
+			"LINE1L", "Line In",
+			"LINE1R", "Line In",
+			"Line Out", "LLOUT",
+			"Line Out", "RLOUT",
+			"MIC3L", "Mic Jack",
+			"MIC3R", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+		simple-audio-card,bitclock-inversion;
+
+		simple-audio-card,cpu {
+			sound-dai = <&mcasp0>;
+			system-clock-frequency = <24576000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			system-clock-frequency = <24576000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		user1 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+
+		user2 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vga-bridge {
+		compatible = "ti,ths8135";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				vga_bridge_in: endpoint {
+					remote-endpoint = <&lcdc_out_vga>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		ddc-i2c-bus = <&i2c0>;
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	cvdd: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cvdd";
+		regulator-min-microvolt = <1300000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&cpu {
+	cpu-supply = <&cvdd>;
+};
+
+/*
+ * LCDK has a fixed CVDD of 1.3V, so only operating points >= 300MHz are
+ * valid. Unfortunately due to a problem with the DA8XX OHCI controller, we
+ * can't enable more than one OPP by default, since the controller sometimes
+ * becomes unresponsive after a transition. Fix the frequency at 456 MHz.
+ */
+
+&opp_100 {
+	status = "disabled";
+};
+
+&opp_200 {
+	status = "disabled";
+};
+
+&opp_300 {
+	status = "disabled";
+};
+
+&opp_456 {
+	status = "okay";
+};
+
+&pmx_core {
+	status = "okay";
+
+	mcasp0_pins: pinmux_mcasp0_pins {
+		pinctrl-single,bits = <
+			/* AHCLKX AFSX ACLKX */
+			0x00 0x00101010 0x00f0f0f0
+			/* ARX13 ARX14 */
+			0x04 0x00000110 0x00000ff0
+		>;
+	};
+
+	nand_pins: nand_pins {
+		pinctrl-single,bits = <
+			/* EMA_WAIT[0], EMA_OE, EMA_WE, EMA_CS[3] */
+			0x1c 0x10110010  0xf0ff00f0
+			/*
+			 * EMA_D[0], EMA_D[1], EMA_D[2],
+			 * EMA_D[3], EMA_D[4], EMA_D[5],
+			 * EMA_D[6], EMA_D[7]
+			 */
+			0x24 0x11111111  0xffffffff
+			/*
+			 * EMA_D[8],  EMA_D[9],  EMA_D[10],
+			 * EMA_D[11], EMA_D[12], EMA_D[13],
+			 * EMA_D[14], EMA_D[15]
+			 */
+			0x20 0x11111111  0xffffffff
+			/* EMA_A[1], EMA_A[2] */
+			0x30 0x01100000  0x0ff00000
+		>;
+	};
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>;
+	status = "okay";
+};
+
+&wdt {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+};
+
+&sata_refclk {
+	status = "okay";
+	clock-frequency = <100000000>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>;
+	bus_freq = <2200000>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mii_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	cd-gpios = <&gpio 64 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	tlv320aic3106: tlv320aic3106@18 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x18>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		IOVDD-supply = <&vcc_3v3d>;
+		AVDD-supply = <&vcc_3v3d>;
+		DRVDD-supply = <&vcc_3v3d>;
+		DVDD-supply = <&vcc_1v8d>;
+	};
+};
+
+&mcasp0 {
+	#sound-dai-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcasp0_pins>;
+	status = "okay";
+
+	op-mode = <0>;   /* DAVINCI_MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	serial-dir = <   /* 0: INACTIVE, 1: TX, 2: RX */
+		0 0 0 0
+		0 0 0 0
+		0 0 0 0
+		0 1 2 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&aemif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_pins>;
+	status = "okay";
+	cs3 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		clock-ranges;
+		ranges;
+
+		ti,cs-chipselect = <3>;
+
+		nand@2000000,0 {
+			compatible = "ti,davinci-nand";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0 0x02000000 0x02000000
+			       1 0x00000000 0x00008000>;
+
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+
+			ti,davinci-nand-buswidth = <16>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+
+			/*
+			 * The OMAP-L132/L138 Bootloader doc SPRAB41E reads:
+			 * "To boot from NAND Flash, the AIS should be written
+			 * to NAND block 1 (NAND block 0 is not used by default)".
+			 * The same doc mentions that for ROM "Silicon Revision 2.1",
+			 * "Updated NAND boot mode to offer boot from block 0 or block 1".
+			 * However the limitaion is left here by default for compatibility
+			 * with older silicon and because it needs new boot pin settings
+			 * not possible in stock LCDK.
+			 */
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				partition@0 {
+					label = "u-boot env";
+					reg = <0 0x020000>;
+				};
+				partition@20000 {
+					/* The LCDK defaults to booting from this partition */
+					label = "u-boot";
+					reg = <0x020000 0x080000>;
+				};
+				partition@a0000 {
+					label = "free space";
+					reg = <0x0a0000 0>;
+				};
+			};
+		};
+	};
+};
+
+&prictrl {
+	status = "okay";
+};
+
+&memctrl {
+	status = "okay";
+};
+
+&lcdc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcd_pins>;
+
+	port {
+		lcdc_out_vga: endpoint {
+			remote-endpoint = <&vga_bridge_in>;
+		};
+	};
+};
+
+&vpif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vpif_capture_pins>;
+	status = "okay";
+};
+
+&dsp {
+	memory-region = <&dsp_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/da850-lego-ev3.dts b/arch/arm/boot/dts/da850-lego-ev3.dts
new file mode 100644
index 000000000000..afd04a423856
--- /dev/null
+++ b/arch/arm/boot/dts/da850-lego-ev3.dts
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device tree for LEGO MINDSTORMS EV3
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+
+#include "da850.dtsi"
+
+/ {
+	compatible = "lego,ev3", "ti,da850";
+	model = "LEGO MINDSTORMS EV3";
+
+	aliases {
+		serial1 = &serial1;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x04000000>;
+	};
+
+	/*
+	 * The buttons on the EV3 are mapped to keyboard keys.
+	 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		label = "EV3 Brick Buttons";
+		pinctrl-names = "default";
+		pinctrl-0 = <&button_bias>;
+
+		center {
+			label = "Center";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
+		};
+
+		left {
+			label = "Left";
+			linux,code = <KEY_LEFT>;
+			gpios = <&gpio 102 GPIO_ACTIVE_HIGH>;
+		};
+
+		back {
+			label = "Back";
+			linux,code = <KEY_BACKSPACE>;
+			gpios = <&gpio 106 GPIO_ACTIVE_HIGH>;
+		};
+
+		right {
+			label = "Right";
+			linux,code = <KEY_RIGHT>;
+			gpios = <&gpio 124 GPIO_ACTIVE_HIGH>;
+		};
+
+		down {
+			label = "Down";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio 126 GPIO_ACTIVE_HIGH>;
+		};
+
+		up {
+			label = "Up";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio 127 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	/*
+	 * The EV3 has two built-in bi-color LEDs behind the buttons.
+	 */
+	leds {
+		compatible = "gpio-leds";
+
+		left_green {
+			label = "led0:green:brick-status";
+			/* GP6[13] */
+			gpios = <&gpio 103 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		right_red {
+			label = "led1:red:brick-status";
+			/* GP6[7] */
+			gpios = <&gpio 108 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		left_red {
+			label = "led0:red:brick-status";
+			/* GP6[12] */
+			gpios = <&gpio 109 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		right_green {
+			label = "led1:green:brick-status";
+			/* GP6[14] */
+			gpios = <&gpio 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	/*
+	 * The EV3 is powered down by turning off the main 5V supply.
+	 */
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio 107 GPIO_ACTIVE_LOW>;
+	};
+
+	sound {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ehrpwm0b_pins>;
+		pwms = <&ehrpwm0 1 1000000 0>;
+		amp-supply = <&amp>;
+	};
+
+	cvdd: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "cvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a 5V current limiting regulator that is shared by USB,
+	 * the sensor (input) ports, the motor (output) ports and the A/DC.
+	 */
+	vcc5v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio 101 0>;
+		over-current-gpios = <&gpio 99 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	/*
+	 * This is a simple voltage divider on VCC5V to provide a 2.5V
+	 * reference signal to the ADC.
+	 */
+	adc_ref: regulator2 {
+		compatible = "regulator-fixed";
+		regulator-name = "adc ref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		vin-supply = <&vcc5v>;
+	};
+
+	/*
+	 * This is the amplifier for the speaker.
+	 */
+	amp: regulator3 {
+		compatible = "regulator-fixed";
+		regulator-name = "amp";
+		gpio = <&gpio 111 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	/*
+	 * The EV3 can use 6-AA batteries or a rechargeable Li-ion battery pack.
+	 */
+	battery {
+		compatible = "lego,ev3-battery";
+		io-channels = <&adc 4>, <&adc 3>;
+		io-channel-names = "voltage", "current";
+		rechargeable-gpios = <&gpio 136 GPIO_ACTIVE_LOW>;
+	};
+
+	bt_slow_clk: bt-clock {
+		pinctrl-names = "default";
+		pinctrl-0 = <&ecap2_pins>, <&bt_clock_bias>;
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&ecap2 0 30518 0>;
+	};
+
+	/* ARM local RAM */
+	memory@ffff0000 {
+		compatible = "syscon", "simple-mfd";
+		reg = <0xffff0000 0x2000>; /* 8k */
+
+		/*
+		 * The I2C bootloader looks for this magic value to either
+		 * boot normally or boot into a firmware update mode.
+		 */
+		reboot-mode {
+			compatible = "syscon-reboot-mode";
+			offset = <0x1ffc>;
+			mode-normal = <0x00000000>;
+			mode-loader = <0x5555aaaa>;
+		};
+	};
+};
+
+&ref_clk {
+	clock-frequency = <24000000>;
+};
+
+&cpu {
+	cpu-supply = <&cvdd>;
+};
+
+/* since we have a fixed regulator, we can't run at these points */
+&opp_100 {
+	status = "disabled";
+};
+
+&opp_200 {
+	status = "disabled";
+};
+
+/*
+ * The SoC is actually the 456MHz version, but because of the fixed regulator
+ * This is the fastest we can go.
+ */
+&opp_375 {
+	status = "okay";
+};
+
+&pmx_core {
+	status = "okay";
+
+	ev3_lcd_pins: pinmux_lcd {
+		pinctrl-single,bits = <
+			/* SIMO, CLK */
+			0x14 0x00100100 0x00f00f00
+		>;
+	};
+};
+
+&pinconf {
+	status = "okay";
+
+	/* Buttons have external pulldown resistors */
+	button_bias: button-bias-groups {
+		disable {
+			groups = "cp5", "cp24", "cp25", "cp28";
+			bias-disable;
+		};
+	};
+
+	bt_clock_bias: bt-clock-bias-groups {
+		disable {
+			groups = "cp2";
+			bias-disable;
+		};
+	};
+
+	bt_pic_bias: bt-pic-bias-groups {
+		disable {
+			groups = "cp20";
+			bias-disable;
+		};
+	};
+};
+
+/* Input port 1 */
+&serial1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial1_rxtx_pins>;
+};
+
+&serial2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&serial2_rxtx_pins>, <&serial2_rtscts_pins>, <&bt_pic_bias>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,cc2560";
+		clocks = <&bt_slow_clk>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio 73 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		nvmem-cells = <&bdaddr>;
+		nvmem-cell-names = "bd-address";
+	};
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+
+	/*
+	 * EEPROM contains the first stage bootloader, HW ID and Bluetooth MAC.
+	 */
+	eeprom@50 {
+		compatible = "microchip,24c128", "atmel,24c128";
+		pagesize = <64>;
+		read-only;
+		reg = <0x50>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		bdaddr: bdaddr@3f06 {
+			reg = <0x3f06 0x06>;
+		};
+	};
+};
+
+&wdt {
+	status = "okay";
+};
+
+&mmc0 {
+	status = "okay";
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio 94 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+};
+
+&spi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>, <&spi0_cs3_pin>;
+
+	flash@0 {
+		compatible = "n25q128a13", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+		ti,spi-wdelay = <8>;
+
+		/* Partitions are based on the official firmware from LEGO */
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "U-Boot";
+				reg = <0 0x40000>;
+			};
+
+			partition@40000 {
+				label = "U-Boot Env";
+				reg = <0x40000 0x10000>;
+			};
+
+			partition@50000 {
+				label = "Kernel";
+				reg = <0x50000 0x200000>;
+			};
+
+			partition@250000 {
+				label = "Filesystem";
+				reg = <0x250000 0xa50000>;
+			};
+
+			partition@cb0000 {
+				label = "Storage";
+				reg = <0xcb0000 0x2f0000>;
+			};
+		};
+	};
+
+	adc: adc@3 {
+		compatible = "ti,ads7957";
+		reg = <3>;
+		#io-channel-cells = <1>;
+		spi-max-frequency = <1000000>;
+		ti,spi-wdelay = <63>;
+		vref-supply = <&adc_ref>;
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-0 = <&ev3_lcd_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+
+	display@0{
+		compatible = "lego,ev3-lcd";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		a0-gpios = <&gpio 43 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio 80 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&ecap2 {
+	status = "okay";
+};
+
+&ehrpwm0 {
+	status = "okay";
+};
+
+&gpio {
+	status = "okay";
+
+	/* Don't pull down battery voltage adc io channel */
+	batt_volt_en {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	/* Don't impede Bluetooth clock signal */
+	bt_clock_en {
+		gpio-hog;
+		gpios = <5 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+
+	/*
+	 * There is a PIC microcontroller for interfacing with an Apple MFi
+	 * chip. This interferes with normal Bluetooth operation, so we need
+	 * to make sure it is turned off. Note: The publicly available
+	 * schematics from LEGO don't show that these pins are connected to
+	 * anything, but they are present in the source code from LEGO.
+	 */
+
+	bt_pic_en {
+		gpio-hog;
+		gpios = <51 GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+
+	bt_pic_rst {
+		gpio-hog;
+		gpios = <78 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+
+	bt_pic_cts {
+		gpio-hog;
+		gpios = <87 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+	vbus-supply = <&vcc5v>;
+};
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 0bd98cd00816..e46e4d22db39 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -1,29 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 DENX Software Engineering GmbH
  * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
-#include "skeleton.dtsi"
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+	aliases { };
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x0>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu: cpu@0 {
+			compatible = "arm,arm926ej-s";
+			device_type = "cpu";
+			reg = <0>;
+			clocks = <&psc0 14>;
+			operating-points-v2 = <&opp_table>;
+		};
+	};
+
+	opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp_100: opp100-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000 950000 1050000>;
+		};
+
+		opp_200: opp110-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1100000 1050000 1160000>;
+		};
+
+		opp_300: opp120-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1200000 1140000 1320000>;
+		};
+
+		/*
+		 * Original silicon was 300MHz max, so higher frequencies
+		 * need to be enabled on a per-board basis if the chip is
+		 * capable.
+		 */
+
+		opp_375: opp120-375000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <375000000>;
+			opp-microvolt = <1200000 1140000 1320000>;
+		};
+
+		opp_456: opp130-456000000 {
+			status = "disabled";
+			opp-hz = /bits/ 64 <456000000>;
+			opp-microvolt = <1300000 1250000 1350000>;
+		};
+	};
+
 	arm {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		intc: interrupt-controller {
+		intc: interrupt-controller@fffee000 {
 			compatible = "ti,cp-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
-			ti,intc-size = <100>;
+			ti,intc-size = <101>;
 			reg = <0xfffee000 0x2000>;
 		};
 	};
-	soc {
+	clocks: clocks {
+		ref_clk: ref_clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "ref_clk";
+		};
+		sata_refclk: sata_refclk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "sata_refclk";
+			status = "disabled";
+		};
+		usb_refclkin: usb_refclkin {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-output-names = "usb_refclkin";
+			status = "disabled";
+		};
+	};
+	dsp: dsp@11800000 {
+		compatible = "ti,da850-dsp";
+		reg = <0x11800000 0x40000>,
+		      <0x11e00000 0x8000>,
+		      <0x11f00000 0x8000>,
+		      <0x01c14044 0x4>,
+		      <0x01c14174 0x8>;
+		reg-names = "l2sram", "l1pram", "l1dram", "host1cfg", "chipsig";
+		interrupt-parent = <&intc>;
+		interrupts = <28>;
+		clocks = <&psc0 15>;
+		resets = <&psc0 15>;
+		status = "disabled";
+	};
+	soc@1c00000 {
 		compatible = "simple-bus";
 		model = "da850";
 		#address-cells = <1>;
@@ -31,30 +119,91 @@
 		ranges = <0x0 0x01c00000 0x400000>;
 		interrupt-parent = <&intc>;
 
-		pmx_core: pinmux@1c14120 {
+		psc0: clock-controller@10000 {
+			compatible = "ti,da850-psc0";
+			reg = <0x10000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 1>, <&pll0_sysclk 2>,
+				 <&pll0_sysclk 4>, <&pll0_sysclk 6>,
+				 <&async1_clk>;
+			clock-names = "pll0_sysclk1", "pll0_sysclk2",
+				      "pll0_sysclk4", "pll0_sysclk6",
+				      "async1";
+		};
+		pll0: clock-controller@11000 {
+			compatible = "ti,da850-pll0";
+			reg = <0x11000 0x1000>;
+			clocks = <&ref_clk>, <&pll1_sysclk 3>;
+			clock-names = "clksrc", "extclksrc";
+
+			pll0_pllout: pllout {
+				#clock-cells = <0>;
+			};
+			pll0_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll0_auxclk: auxclk {
+				#clock-cells = <0>;
+			};
+			pll0_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
+		pmx_core: pinmux@14120 {
 			compatible = "pinctrl-single";
 			reg = <0x14120 0x50>;
-			#address-cells = <1>;
-			#size-cells = <0>;
+			#pinctrl-cells = <2>;
 			pinctrl-single,bit-per-mux;
 			pinctrl-single,register-width = <32>;
 			pinctrl-single,function-mask = <0xf>;
+			/* pin base, nr pins & gpio function */
+			pinctrl-single,gpio-range = <&range   0 17 0x8>,
+						    <&range  17  8 0x4>,
+						    <&range  26  8 0x4>,
+						    <&range  34 80 0x8>,
+						    <&range 129 31 0x8>;
 			status = "disabled";
 
-			nand_cs3_pins: pinmux_nand_pins {
+			range: gpio-range {
+				#pinctrl-single,gpio-range-cells = <3>;
+			};
+
+			serial0_rtscts_pins: pinmux_serial0_rtscts_pins {
 				pinctrl-single,bits = <
-					/* EMA_OE, EMA_WE */
-					0x1c 0x00110000  0x00ff0000
-					/* EMA_CS[4],EMA_CS[3]*/
-					0x1c 0x00000110  0x00000ff0
-					/*
-					 * EMA_D[0], EMA_D[1], EMA_D[2],
-					 * EMA_D[3], EMA_D[4], EMA_D[5],
-					 * EMA_D[6], EMA_D[7]
-					 */
-					0x24 0x11111111  0xffffffff
-					/* EMA_A[1], EMA_A[2] */
-					0x30 0x01100000  0x0ff00000
+					/* UART0_RTS UART0_CTS */
+					0x0c 0x22000000 0xff000000
+				>;
+			};
+			serial0_rxtx_pins: pinmux_serial0_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART0_TXD UART0_RXD */
+					0x0c 0x00220000 0x00ff0000
+				>;
+			};
+			serial1_rtscts_pins: pinmux_serial1_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART1_CTS UART1_RTS */
+					0x00 0x00440000 0x00ff0000
+				>;
+			};
+			serial1_rxtx_pins: pinmux_serial1_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART1_TXD UART1_RXD */
+					0x10 0x22000000 0xff000000
+				>;
+			};
+			serial2_rtscts_pins: pinmux_serial2_rtscts_pins {
+				pinctrl-single,bits = <
+					/* UART2_CTS UART2_RTS */
+					0x00 0x44000000 0xff000000
+				>;
+			};
+			serial2_rxtx_pins: pinmux_serial2_rxtx_pins {
+				pinctrl-single,bits = <
+					/* UART2_TXD UART2_RXD */
+					0x10 0x00220000 0x00ff0000
 				>;
 			};
 			i2c0_pins: pinmux_i2c0_pins {
@@ -63,6 +212,12 @@
 					0x10 0x00002200 0x0000ff00
 				>;
 			};
+			i2c1_pins: pinmux_i2c1_pins {
+				pinctrl-single,bits = <
+					/* I2C1_SDA, I2C1_SCL */
+					0x10 0x00440000 0x00ff0000
+				>;
+			};
 			mmc0_pins: pinmux_mmc_pins {
 				pinctrl-single,bits = <
 					/* MMCSD0_DAT[3] MMCSD0_DAT[2]
@@ -114,7 +269,25 @@
 					0x4 0x00000004 0x0000000f
 				>;
 			};
-			spi1_pins: pinmux_spi_pins {
+			spi0_pins: pinmux_spi0_pins {
+				pinctrl-single,bits = <
+					/* SIMO, SOMI, CLK */
+					0xc 0x00001101 0x0000ff0f
+				>;
+			};
+			spi0_cs0_pin: pinmux_spi0_cs0 {
+				pinctrl-single,bits = <
+					/* CS0 */
+					0x10 0x00000010 0x000000f0
+				>;
+			};
+			spi0_cs3_pin: pinmux_spi0_cs3_pin {
+				pinctrl-single,bits = <
+					/* CS3 */
+					0xc 0x01000000 0x0f000000
+				>;
+			};
+			spi1_pins: pinmux_spi1_pins {
 				pinctrl-single,bits = <
 					/* SIMO, SOMI, CLK */
 					0x14 0x00110100 0x00ff0f00
@@ -148,92 +321,318 @@
 					0xc 0x88888888 0xffffffff
 				>;
 			};
+			lcd_pins: pinmux_lcd_pins {
+				pinctrl-single,bits = <
+					/*
+					 * LCD_D[2], LCD_D[3], LCD_D[4], LCD_D[5],
+					 * LCD_D[6], LCD_D[7]
+					 */
+					0x40 0x22222200 0xffffff00
+					/*
+					 * LCD_D[10], LCD_D[11], LCD_D[12], LCD_D[13],
+					 * LCD_D[14], LCD_D[15], LCD_D[0], LCD_D[1]
+					 */
+					0x44 0x22222222 0xffffffff
+					/* LCD_D[8], LCD_D[9] */
+					0x48 0x00000022 0x000000ff
+
+					/* LCD_PCLK */
+					0x48 0x02000000 0x0f000000
+					/* LCD_AC_ENB_CS, LCD_VSYNC, LCD_HSYNC */
+					0x4c 0x02000022 0x0f0000ff
+				>;
+			};
+			vpif_capture_pins: vpif_capture_pins {
+				pinctrl-single,bits = <
+					/* VP_DIN[2..7], VP_CLKIN1, VP_CLKIN0 */
+					0x38 0x11111111 0xffffffff
+					/* VP_DIN[10..15,0..1] */
+					0x3c 0x11111111 0xffffffff
+					/* VP_DIN[8..9] */
+					0x40 0x00000011 0x000000ff
+				>;
+			};
+			vpif_display_pins: vpif_display_pins {
+				pinctrl-single,bits = <
+					/* VP_DOUT[2..7] */
+					0x40 0x11111100 0xffffff00
+					/* VP_DOUT[10..15,0..1] */
+					0x44 0x11111111 0xffffffff
+					/*  VP_DOUT[8..9] */
+					0x48 0x00000011 0x000000ff
+					/*
+					 * VP_CLKOUT3, VP_CLKIN3,
+					 * VP_CLKOUT2, VP_CLKIN2
+					 */
+					0x4c 0x00111100 0x00ffff00
+				>;
+			};
+		};
+		prictrl: priority-controller@14110 {
+			compatible = "ti,da850-mstpri";
+			reg = <0x14110 0x0c>;
+			status = "disabled";
+		};
+		cfgchip: chip-controller@1417c {
+			compatible = "ti,da830-cfgchip", "syscon", "simple-mfd";
+			reg = <0x1417c 0x14>;
 
+			usb_phy: usb-phy {
+				compatible = "ti,da830-usb-phy";
+				#phy-cells = <1>;
+				clocks = <&usb_phy_clk 0>, <&usb_phy_clk 1>;
+				clock-names = "usb0_clk48", "usb1_clk48";
+				status = "disabled";
+			};
+			usb_phy_clk: usb-phy-clocks {
+				compatible = "ti,da830-usb-phy-clocks";
+				#clock-cells = <1>;
+				clocks = <&psc1 1>, <&usb_refclkin>,
+					 <&pll0_auxclk>;
+				clock-names = "fck", "usb_refclkin", "auxclk";
+			};
+			ehrpwm_tbclk: ehrpwm_tbclk {
+				compatible = "ti,da830-tbclksync";
+				#clock-cells = <0>;
+				clocks = <&psc1 17>;
+				clock-names = "fck";
+			};
+			div4p5_clk: div4.5 {
+				compatible = "ti,da830-div4p5ena";
+				#clock-cells = <0>;
+				clocks = <&pll0_pllout>;
+				clock-names = "pll0_pllout";
+			};
+			async1_clk: async1 {
+				compatible = "ti,da850-async1-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 3>, <&div4p5_clk>;
+				clock-names = "pll0_sysclk3", "div4.5";
+			};
+			async3_clk: async3 {
+				compatible = "ti,da850-async3-clksrc";
+				#clock-cells = <0>;
+				clocks = <&pll0_sysclk 2>, <&pll1_sysclk 2>;
+				clock-names = "pll0_sysclk2", "pll1_sysclk2";
+			};
+		};
+		edma0: edma@0 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC0: 0x01c0 0000 - 0x01c0 7fff */
+			reg = <0x0 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <11 12>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
+			power-domains = <&psc0 0>;
+		};
+		edma0_tptc0: tptc@8000 {
+			compatible = "ti,edma3-tptc";
+			reg = <0x8000 0x400>;
+			interrupts = <13>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 1>;
 		};
-		edma0: edma@01c00000 {
-			compatible = "ti,edma3";
-			reg =	<0x0 0x10000>;
-			interrupts = <11 13 12>;
-			#dma-cells = <1>;
+		edma0_tptc1: tptc@8400 {
+			compatible = "ti,edma3-tptc";
+			reg = <0x8400 0x400>;
+			interrupts = <32>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc0 2>;
 		};
-		serial0: serial@1c42000 {
-			compatible = "ns16550a";
+		edma1: edma@230000 {
+			compatible = "ti,edma3-tpcc";
+			/* eDMA3 CC1: 0x01e3 0000 - 0x01e3 7fff */
+			reg = <0x230000 0x8000>;
+			reg-names = "edma3_cc";
+			interrupts = <93 94>;
+			interrupt-names = "edma3_ccint", "edma3_ccerrint";
+			#dma-cells = <2>;
+
+			ti,tptcs = <&edma1_tptc0 7>;
+			power-domains = <&psc1 0>;
+		};
+		edma1_tptc0: tptc@238000 {
+			compatible = "ti,edma3-tptc";
+			reg = <0x238000 0x400>;
+			interrupts = <95>;
+			interrupt-names = "edm3_tcerrint";
+			power-domains = <&psc1 21>;
+		};
+		serial0: serial@42000 {
+			compatible = "ti,da830-uart", "ns16550a";
 			reg = <0x42000 0x100>;
+			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <25>;
+			clocks = <&psc0 9>;
+			power-domains = <&psc0 9>;
 			status = "disabled";
 		};
-		serial1: serial@1d0c000 {
-			compatible = "ns16550a";
+		serial1: serial@10c000 {
+			compatible = "ti,da830-uart", "ns16550a";
 			reg = <0x10c000 0x100>;
+			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <53>;
+			clocks = <&psc1 12>;
+			power-domains = <&psc1 12>;
 			status = "disabled";
 		};
-		serial2: serial@1d0d000 {
-			compatible = "ns16550a";
+		serial2: serial@10d000 {
+			compatible = "ti,da830-uart", "ns16550a";
 			reg = <0x10d000 0x100>;
+			reg-io-width = <4>;
 			reg-shift = <2>;
 			interrupts = <61>;
+			clocks = <&psc1 13>;
+			power-domains = <&psc1 13>;
 			status = "disabled";
 		};
-		rtc0: rtc@1c23000 {
+		rtc0: rtc@23000 {
 			compatible = "ti,da830-rtc";
 			reg = <0x23000 0x1000>;
 			interrupts = <19
 				      19>;
+			clocks = <&pll0_auxclk>;
+			clock-names = "int-clk";
 			status = "disabled";
 		};
-		i2c0: i2c@1c22000 {
+		i2c0: i2c@22000 {
 			compatible = "ti,davinci-i2c";
 			reg = <0x22000 0x1000>;
 			interrupts = <15>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
-		wdt: wdt@1c21000 {
+		i2c1: i2c@228000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x228000 0x1000>;
+			interrupts = <51>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&psc1 11>;
+			power-domains = <&psc1 11>;
+			status = "disabled";
+		};
+		clocksource: timer@20000 {
+			compatible = "ti,da830-timer";
+			reg = <0x20000 0x1000>;
+			interrupts = <21>, <22>;
+			interrupt-names = "tint12", "tint34";
+			clocks = <&pll0_auxclk>;
+		};
+		wdt: wdt@21000 {
 			compatible = "ti,davinci-wdt";
 			reg = <0x21000 0x1000>;
+			clocks = <&pll0_auxclk>;
 			status = "disabled";
 		};
-		mmc0: mmc@1c40000 {
+		mmc0: mmc@40000 {
 			compatible = "ti,da830-mmc";
 			reg = <0x40000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
 			interrupts = <16>;
+			dmas = <&edma0 16 0>, <&edma0 17 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc0 5>;
 			status = "disabled";
 		};
-		ehrpwm0: ehrpwm@01f00000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+		vpif: video@217000 {
+			compatible = "ti,da850-vpif";
+			reg = <0x217000 0x1000>;
+			interrupts = <92>;
+			power-domains = <&psc1 9>;
+			status = "disabled";
+
+			/* VPIF capture port */
+			port@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			/* VPIF display port */
+			port@1 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+		mmc1: mmc@21b000 {
+			compatible = "ti,da830-mmc";
+			reg = <0x21b000 0x1000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			interrupts = <72>;
+			dmas = <&edma1 28 0>, <&edma1 29 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc1 18>;
+			status = "disabled";
+		};
+		ehrpwm0: pwm@300000 {
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x300000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
-		ehrpwm1: ehrpwm@01f02000 {
-			compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+		ehrpwm1: pwm@302000 {
+			compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm";
 			#pwm-cells = <3>;
 			reg = <0x302000 0x2000>;
+			clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+			clock-names = "fck", "tbclk";
+			power-domains = <&psc1 17>;
 			status = "disabled";
 		};
-		ecap0: ecap@01f06000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+		ecap0: pwm@306000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap";
 			#pwm-cells = <3>;
 			reg = <0x306000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
-		ecap1: ecap@01f07000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+		ecap1: pwm@307000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap";
 			#pwm-cells = <3>;
 			reg = <0x307000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
 			status = "disabled";
 		};
-		ecap2: ecap@01f08000 {
-			compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+		ecap2: pwm@308000 {
+			compatible = "ti,da850-ecap", "ti,am3352-ecap";
 			#pwm-cells = <3>;
 			reg = <0x308000 0x80>;
+			clocks = <&psc1 20>;
+			clock-names = "fck";
+			power-domains = <&psc1 20>;
+			status = "disabled";
+		};
+		spi0: spi@41000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "ti,da830-spi";
+			reg = <0x41000 0x1000>;
+			num-cs = <6>;
+			ti,davinci-spi-intr-line = <1>;
+			interrupts = <20>;
+			dmas = <&edma0 14 0>, <&edma0 15 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc0 4>;
+			power-domains = <&psc0 4>;
 			status = "disabled";
 		};
-		spi1: spi@1f0e000 {
+		spi1: spi@30e000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "ti,da830-spi";
@@ -241,15 +640,84 @@
 			num-cs = <4>;
 			ti,davinci-spi-intr-line = <1>;
 			interrupts = <56>;
+			dmas = <&edma0 18 0>, <&edma0 19 0>;
+			dma-names = "rx", "tx";
+			clocks = <&psc1 10>;
+			power-domains = <&psc1 10>;
+			status = "disabled";
+		};
+		usb0: usb@200000 {
+			compatible = "ti,da830-musb";
+			reg = <0x200000 0x1000>;
+			ranges;
+			interrupts = <58>;
+			interrupt-names = "mc";
+			dr_mode = "otg";
+			phys = <&usb_phy 0>;
+			phy-names = "usb-phy";
+			clocks = <&psc1 1>;
+			clock-ranges;
+			status = "disabled";
+
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			dmas = <&cppi41dma 0 0 &cppi41dma 1 0
+				&cppi41dma 2 0 &cppi41dma 3 0
+				&cppi41dma 0 1 &cppi41dma 1 1
+				&cppi41dma 2 1 &cppi41dma 3 1>;
+			dma-names =
+				"rx1", "rx2", "rx3", "rx4",
+				"tx1", "tx2", "tx3", "tx4";
+
+			cppi41dma: dma-controller@201000 {
+				compatible = "ti,da830-cppi41";
+				reg = <0x201000 0x1000
+					0x202000 0x1000
+					0x204000 0x4000>;
+				reg-names = "controller",
+					    "scheduler", "queuemgr";
+				interrupts = <58>;
+				#dma-cells = <2>;
+				/* For backwards compatibility: */
+				#dma-channels = <4>;
+				dma-channels = <4>;
+				power-domains = <&psc1 1>;
+				status = "okay";
+			};
+		};
+		sata: sata@218000 {
+			compatible = "ti,da850-ahci";
+			reg = <0x218000 0x2000>, <0x22c018 0x4>;
+			interrupts = <67>;
+			clocks = <&psc1 8>, <&sata_refclk>;
+			clock-names = "fck", "refclk";
 			status = "disabled";
 		};
-		mdio: mdio@1e24000 {
+		pll1: clock-controller@21a000 {
+			compatible = "ti,da850-pll1";
+			reg = <0x21a000 0x1000>;
+			clocks = <&ref_clk>;
+			clock-names = "clksrc";
+
+			pll1_sysclk: sysclk {
+				#clock-cells = <1>;
+			};
+			pll1_obsclk: obsclk {
+				#clock-cells = <0>;
+			};
+		};
+		mdio: mdio@224000 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x224000 0x1000>;
+			clocks = <&psc1 5>;
+			clock-names = "fck";
+			power-domains = <&psc1 5>;
+			status = "disabled";
 		};
-		eth0: ethernet@1e20000 {
+		eth0: ethernet@220000 {
 			compatible = "ti,davinci-dm6467-emac";
 			reg = <0x220000 0x4000>;
 			ti,davinci-ctrl-reg-offset = <0x3000>;
@@ -262,45 +730,235 @@
 					35
 					36
 					>;
+			clocks = <&psc1 5>;
+			power-domains = <&psc1 5>;
+			status = "disabled";
+		};
+		usb1: usb@225000 {
+			compatible = "ti,da830-ohci";
+			reg = <0x225000 0x1000>;
+			interrupts = <59>;
+			phys = <&usb_phy 1>;
+			phy-names = "usb-phy";
+			clocks = <&psc1 2>;
+			status = "disabled";
 		};
-		gpio: gpio@1e26000 {
+		gpio: gpio@226000 {
 			compatible = "ti,dm6441-gpio";
 			gpio-controller;
+			#gpio-cells = <2>;
 			reg = <0x226000 0x1000>;
-			interrupts = <42 IRQ_TYPE_EDGE_BOTH
-				43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH
-				45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH
-				47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH
-				49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>;
+			interrupts = <42 43 44 45 46 47 48 49 50>;
 			ti,ngpio = <144>;
 			ti,davinci-gpio-unbanked = <0>;
+			clocks = <&psc1 3>;
+			clock-names = "gpio";
+			status = "disabled";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-ranges = <&pmx_core   0  15 1>,
+				      <&pmx_core   1  14 1>,
+				      <&pmx_core   2  13 1>,
+				      <&pmx_core   3  12 1>,
+				      <&pmx_core   4  11 1>,
+				      <&pmx_core   5  10 1>,
+				      <&pmx_core   6   9 1>,
+				      <&pmx_core   7   8 1>,
+				      <&pmx_core   8   7 1>,
+				      <&pmx_core   9   6 1>,
+				      <&pmx_core  10   5 1>,
+				      <&pmx_core  11   4 1>,
+				      <&pmx_core  12   3 1>,
+				      <&pmx_core  13   2 1>,
+				      <&pmx_core  14   1 1>,
+				      <&pmx_core  15   0 1>,
+				      <&pmx_core  16  39 1>,
+				      <&pmx_core  17  38 1>,
+				      <&pmx_core  18  37 1>,
+				      <&pmx_core  19  36 1>,
+				      <&pmx_core  20  35 1>,
+				      <&pmx_core  21  34 1>,
+				      <&pmx_core  22  33 1>,
+				      <&pmx_core  23  32 1>,
+				      <&pmx_core  24  24 1>,
+				      <&pmx_core  25  22 1>,
+				      <&pmx_core  26  21 1>,
+				      <&pmx_core  27  20 1>,
+				      <&pmx_core  28  19 1>,
+				      <&pmx_core  29  18 1>,
+				      <&pmx_core  30  17 1>,
+				      <&pmx_core  31  16 1>,
+				      <&pmx_core  32  55 1>,
+				      <&pmx_core  33  54 1>,
+				      <&pmx_core  34  53 1>,
+				      <&pmx_core  35  52 1>,
+				      <&pmx_core  36  51 1>,
+				      <&pmx_core  37  50 1>,
+				      <&pmx_core  38  49 1>,
+				      <&pmx_core  39  48 1>,
+				      <&pmx_core  40  47 1>,
+				      <&pmx_core  41  46 1>,
+				      <&pmx_core  42  45 1>,
+				      <&pmx_core  43  44 1>,
+				      <&pmx_core  44  43 1>,
+				      <&pmx_core  45  42 1>,
+				      <&pmx_core  46  41 1>,
+				      <&pmx_core  47  40 1>,
+				      <&pmx_core  48  71 1>,
+				      <&pmx_core  49  70 1>,
+				      <&pmx_core  50  69 1>,
+				      <&pmx_core  51  68 1>,
+				      <&pmx_core  52  67 1>,
+				      <&pmx_core  53  66 1>,
+				      <&pmx_core  54  65 1>,
+				      <&pmx_core  55  64 1>,
+				      <&pmx_core  56  63 1>,
+				      <&pmx_core  57  62 1>,
+				      <&pmx_core  58  61 1>,
+				      <&pmx_core  59  60 1>,
+				      <&pmx_core  60  59 1>,
+				      <&pmx_core  61  58 1>,
+				      <&pmx_core  62  57 1>,
+				      <&pmx_core  63  56 1>,
+				      <&pmx_core  64  87 1>,
+				      <&pmx_core  65  86 1>,
+				      <&pmx_core  66  85 1>,
+				      <&pmx_core  67  84 1>,
+				      <&pmx_core  68  83 1>,
+				      <&pmx_core  69  82 1>,
+				      <&pmx_core  70  81 1>,
+				      <&pmx_core  71  80 1>,
+				      <&pmx_core  72  70 1>,
+				      <&pmx_core  73  78 1>,
+				      <&pmx_core  74  77 1>,
+				      <&pmx_core  75  76 1>,
+				      <&pmx_core  76  75 1>,
+				      <&pmx_core  77  74 1>,
+				      <&pmx_core  78  73 1>,
+				      <&pmx_core  79  72 1>,
+				      <&pmx_core  80 103 1>,
+				      <&pmx_core  81 102 1>,
+				      <&pmx_core  82 101 1>,
+				      <&pmx_core  83 100 1>,
+				      <&pmx_core  84  99 1>,
+				      <&pmx_core  85  98 1>,
+				      <&pmx_core  86  97 1>,
+				      <&pmx_core  87  96 1>,
+				      <&pmx_core  88  95 1>,
+				      <&pmx_core  89  94 1>,
+				      <&pmx_core  90  93 1>,
+				      <&pmx_core  91  92 1>,
+				      <&pmx_core  92  91 1>,
+				      <&pmx_core  93  90 1>,
+				      <&pmx_core  94  89 1>,
+				      <&pmx_core  95  88 1>,
+				      <&pmx_core  96 158 1>,
+				      <&pmx_core  97 157 1>,
+				      <&pmx_core  98 156 1>,
+				      <&pmx_core  99 155 1>,
+				      <&pmx_core 100 154 1>,
+				      <&pmx_core 101 129 1>,
+				      <&pmx_core 102 113 1>,
+				      <&pmx_core 103 112 1>,
+				      <&pmx_core 104 111 1>,
+				      <&pmx_core 105 110 1>,
+				      <&pmx_core 106 109 1>,
+				      <&pmx_core 107 108 1>,
+				      <&pmx_core 108 107 1>,
+				      <&pmx_core 109 106 1>,
+				      <&pmx_core 110 105 1>,
+				      <&pmx_core 111 104 1>,
+				      <&pmx_core 112 145 1>,
+				      <&pmx_core 113 144 1>,
+				      <&pmx_core 114 143 1>,
+				      <&pmx_core 115 142 1>,
+				      <&pmx_core 116 141 1>,
+				      <&pmx_core 117 140 1>,
+				      <&pmx_core 118 139 1>,
+				      <&pmx_core 119 138 1>,
+				      <&pmx_core 120 137 1>,
+				      <&pmx_core 121 136 1>,
+				      <&pmx_core 122 135 1>,
+				      <&pmx_core 123 134 1>,
+				      <&pmx_core 124 133 1>,
+				      <&pmx_core 125 132 1>,
+				      <&pmx_core 126 131 1>,
+				      <&pmx_core 127 130 1>,
+				      <&pmx_core 128 159 1>,
+				      <&pmx_core 129  31 1>,
+				      <&pmx_core 130  30 1>,
+				      <&pmx_core 131  20 1>,
+				      <&pmx_core 132  28 1>,
+				      <&pmx_core 133  27 1>,
+				      <&pmx_core 134  26 1>,
+				      <&pmx_core 135  23 1>,
+				      <&pmx_core 136 153 1>,
+				      <&pmx_core 137 152 1>,
+				      <&pmx_core 138 151 1>,
+				      <&pmx_core 139 150 1>,
+				      <&pmx_core 140 149 1>,
+				      <&pmx_core 141 148 1>,
+				      <&pmx_core 142 147 1>,
+				      <&pmx_core 143 146 1>;
+		};
+		psc1: clock-controller@227000 {
+			compatible = "ti,da850-psc1";
+			reg = <0x227000 0x1000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			clocks = <&pll0_sysclk 2>, <&pll0_sysclk 4>,
+				 <&async3_clk>;
+			clock-names = "pll0_sysclk2", "pll0_sysclk4", "async3";
+			assigned-clocks = <&async3_clk>;
+			assigned-clock-parents = <&pll1_sysclk 2>;
+		};
+		pinconf: pin-controller@22c00c {
+			compatible = "ti,da850-pupd";
+			reg = <0x22c00c 0x8>;
 			status = "disabled";
 		};
 
-		mcasp0: mcasp@01d00000 {
+		mcasp0: mcasp@100000 {
 			compatible = "ti,da830-mcasp-audio";
 			reg = <0x100000 0x2000>,
 			      <0x102000 0x400000>;
 			reg-names = "mpu", "dat";
 			interrupts = <54>;
 			interrupt-names = "common";
+			power-domains = <&psc1 7>;
 			status = "disabled";
-			dmas = <&edma0 1>,
-				<&edma0 0>;
+			dmas = <&edma0 1 1>,
+				<&edma0 0 1>;
 			dma-names = "tx", "rx";
 		};
+
+		lcdc: display@213000 {
+			compatible = "ti,da850-tilcdc";
+			reg = <0x213000 0x1000>;
+			interrupts = <52>;
+			max-pixelclock = <37500>;
+			clocks = <&psc1 16>;
+			clock-names = "fck";
+			power-domains = <&psc1 16>;
+			status = "disabled";
+		};
+	};
+	aemif: aemif@68000000 {
+		compatible = "ti,da850-aemif";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		reg = <0x68000000 0x00008000>;
+		ranges = <0 0 0x60000000 0x08000000
+			  1 0 0x68000000 0x00008000>;
+		clocks = <&psc0 3>;
+		clock-names = "aemif";
+		clock-ranges;
+		status = "disabled";
 	};
-	nand_cs3@62000000 {
-		compatible = "ti,davinci-nand";
-		reg = <0x62000000 0x807ff
-		       0x68000000 0x8000>;
-		ti,davinci-chipselect = <1>;
-		ti,davinci-mask-ale = <0>;
-		ti,davinci-mask-cle = <0>;
-		ti,davinci-mask-chipsel = <0>;
-		ti,davinci-ecc-mode = "hw";
-		ti,davinci-ecc-bits = <4>;
-		ti,davinci-nand-use-bbt;
+	memctrl: memory-controller@b0000000 {
+		compatible = "ti,da850-ddr-controller";
+		reg = <0xb0000000 0xe8>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/dm3725.dtsi b/arch/arm/boot/dts/dm3725.dtsi
new file mode 100644
index 000000000000..d24e906a14b1
--- /dev/null
+++ b/arch/arm/boot/dts/dm3725.dtsi
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 André Hentschel <nerv@dawncrow.de>
+ */
+
+#include "omap36xx.dtsi"
+
+&sgx_module {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dm8148-evm.dts b/arch/arm/boot/dts/dm8148-evm.dts
new file mode 100644
index 000000000000..fe3f9a970b18
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-evm.dts
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm814x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DM8148 EVM";
+	compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name = "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc1 {
+        status = "disabled";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&mmc3 {
+        status = "disabled";
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm8148-t410.dts b/arch/arm/boot/dts/dm8148-t410.dts
new file mode 100644
index 000000000000..79ccdd4470f4
--- /dev/null
+++ b/arch/arm/boot/dts/dm8148-t410.dts
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dm814x.dtsi"
+
+/ {
+	model = "HP t410 Smart Zero Client";
+	compatible = "hp,t410", "ti,dm8148", "ti,dm814";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* gpio9 seems to control USB VBUS regulator and/or hub power */
+	usb_power: regulator@9 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_power";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&mmc1 {
+	status = "disabled";
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <8>;
+	dmas = <&edma_xbar 8 0 1	/* use SDTXEVT1 instead of MCASP0TX */
+		&edma_xbar 9 0 2>;	/* use SDRXEVT1 instead of MCASP0RX */
+	dma-names = "tx", "rx";
+	non-removable;
+};
+
+&pincntl {
+	sd2_pins: pinmux_sd2_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x09c0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[7] */
+			DM814X_IOPAD(0x09c4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[6] */
+			DM814X_IOPAD(0x09c8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[5] */
+			DM814X_IOPAD(0x09cc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[4] */
+			DM814X_IOPAD(0x09d0, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[3] */
+			DM814X_IOPAD(0x09d4, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[2] */
+			DM814X_IOPAD(0x09d8, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[1] */
+			DM814X_IOPAD(0x09dc, PIN_INPUT_PULLUP | 0x1)	/* SD2_DAT[0] */
+			DM814X_IOPAD(0x09e0, PIN_INPUT | 0x1)		/* SD2_CLK */
+			DM814X_IOPAD(0x09f4, PIN_INPUT_PULLUP | 0x2)	/* SD2_CMD */
+			DM814X_IOPAD(0x0920, PIN_INPUT | 0x40)	/* SD2_SDCD */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+
+	usb1_pins: pinmux_usb1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0834, PIN_OUTPUT | 0x80)	/* USB1_DRVVBUS */
+			>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "host";
+};
+
+&usb1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins>;
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/dm814x-clocks.dtsi b/arch/arm/boot/dts/dm814x-clocks.dtsi
new file mode 100644
index 000000000000..f7939f43413b
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x-clocks.dtsi
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+&pllss {
+	/*
+	 * See TRM "2.6.10 Connected outputso DPLLS" and
+	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+	 * connected except for hdmi and usb.
+	 */
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
+
+	adpll_sgx_ck: adpll@b0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xb0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50b0.adpll.dcoclkldo",
+				     "481c50b0.adpll.clkout",
+				     "481c50b0.adpll.clkoutldo";
+	};
+
+	adpll_hdvic_ck: adpll@e0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xe0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50e0.adpll.dcoclkldo",
+				     "481c50e0.adpll.clkout",
+				     "481c50e0.adpll.clkoutldo";
+	};
+
+	adpll_l3_ck: adpll@110 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x110 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5110.adpll.dcoclkldo",
+				     "481c5110.adpll.clkout",
+				     "481c5110.adpll.clkoutldo";
+	};
+
+	adpll_isp_ck: adpll@140 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x140 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5140.adpll.dcoclkldo",
+				     "481c5140.adpll.clkout",
+				     "481c5140.adpll.clkoutldo";
+	};
+
+	adpll_dss_ck: adpll@170 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x170 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5170.adpll.dcoclkldo",
+				     "481c5170.adpll.clkout",
+				     "481c5170.adpll.clkoutldo";
+	};
+
+	adpll_video0_ck: adpll@1a0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1a0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51a0.adpll.dcoclkldo",
+				     "481c51a0.adpll.clkout",
+				     "481c51a0.adpll.clkoutldo";
+	};
+
+	adpll_video1_ck: adpll@1d0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1d0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51d0.adpll.dcoclkldo",
+				     "481c51d0.adpll.clkout",
+				     "481c51d0.adpll.clkoutldo";
+	};
+
+	adpll_hdmi_ck: adpll@200 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x200 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5200.adpll.dcoclkldo",
+				     "481c5200.adpll.clkout",
+				     "481c5200.adpll.clkoutldo";
+	};
+
+	adpll_audio_ck: adpll@230 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x230 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5230.adpll.dcoclkldo",
+				     "481c5230.adpll.clkout",
+				     "481c5230.adpll.clkoutldo";
+	};
+
+	adpll_usb_ck: adpll@260 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x260 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5260.adpll.dcoclkldo",
+				     "481c5260.adpll.clkout",
+				     "481c5260.adpll.clkoutldo";
+	};
+
+	adpll_ddr_ck: adpll@290 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x290 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5290.adpll.dcoclkldo",
+				     "481c5290.adpll.clkout",
+				     "481c5290.adpll.clkoutldo";
+	};
+};
+
+&pllss_clocks {
+	timer1_fck: timer1_fck@2e0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <3>;
+		reg = <0x2e0>;
+	};
+
+	timer2_fck: timer2_fck@2e0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+			  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+		ti,bit-shift = <6>;
+		reg = <0x2e0>;
+	};
+
+	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&adpll_video0_ck 1
+			  &adpll_video1_ck 1
+			  &adpll_audio_ck 1>;
+		ti,bit-shift = <1>;
+		reg = <0x2e8>;
+	};
+
+	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
+	sysclk18_ck: sysclk18_ck@2f0 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&rtcosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x02f0>;
+	};
+};
+
+&scm_clocks {
+	devosc_ck: devosc_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_20000000_ck>, <&virt_19200000_ck>;
+		ti,bit-shift = <21>;
+		reg = <0x0040>;
+	};
+
+	/* Optional auxosc, 20 - 30 MHz range, assume 22.5729 MHz by default */
+	auxosc_ck: auxosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <22572900>;
+	};
+
+	/* Optional 32768Hz crystal or clock on RTCOSC pins */
+	rtcosc_ck: rtcosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	/* Optional external clock on TCLKIN pin, set rate in baord dts file */
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+	};
+
+	virt_20000000_ck: virt_20000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	mpu_ck: mpu_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <1000000000>;
+	};
+};
+
+&prcm_clocks {
+	osc_src_ck: osc_src_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mpu_clksrc_ck: mpu_clksrc_ck@40 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&devosc_ck>, <&rtcdivider_ck>;
+		ti,bit-shift = <0>;
+		reg = <0x0040>;
+	};
+
+	/* Fixed divider clock 0.0016384 * devosc */
+	rtcdivider_ck: rtcdivider_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&devosc_ck>;
+		clock-mult = <128>;
+		clock-div = <78125>;
+	};
+
+	/* L4_HS 220 MHz*/
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	/* L4_FWCFG */
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	/* L4_LS 110 MHz */
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	sysclk8_ck: sysclk8_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_usb_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		compatible = "ti,divider-clock";
+		reg = <0x324>;
+		ti,max-div = <7>;
+		#clock-cells = <0>;
+		clocks = <&adpll_usb_ck 1>;
+	};
+
+	aud_clkin0_ck: aud_clkin0_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin1_ck: aud_clkin1_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+
+	aud_clkin2_ck: aud_clkin2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
+};
+
+&prcm {
+	default_cm: default_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		default_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	alwon_cm: alwon_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x300>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x300>;
+
+		alwon_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x228>;
+			#clock-cells = <2>;
+		};
+	};
+
+	alwon_ethernet_cm: alwon_ethernet_cm@15d4 {
+		compatible = "ti,omap4-cm";
+		reg = <0x15d4 0x4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x15d4 0x4>;
+
+		alwon_ethernet_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
new file mode 100644
index 000000000000..a8cd724ce4bc
--- /dev/null
+++ b/arch/arm/boot/dts/dm814x.dtsi
@@ -0,0 +1,788 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm814.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/dm814x.h>
+
+/ {
+	compatible = "ti,dm814";
+	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+		usb0 = &usb0;
+		usb1 = &usb1;
+		phy0 = &usb0_phy;
+		phy1 = &usb1_phy;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			compatible = "arm,cortex-a8";
+			device_type = "cpu";
+			reg = <0>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupts = <3>;
+	};
+
+	/*
+	 * The soc node represents the soc top level view. It is used for IPs
+	 * that are not memory mapped in the MPU view or for the MPU itself.
+	 */
+	soc {
+		compatible = "ti,omap-infra";
+		mpu {
+			compatible = "ti,omap3-mpu";
+			ti,hwmods = "mpu";
+		};
+	};
+
+	ocp {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+
+		usb: usb@47400000 {
+			compatible = "ti,am33xx-usb";
+			reg = <0x47400000 0x1000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "usb_otg_hs";
+
+			usb0_phy: usb-phy@47401300 {
+				compatible = "ti,am335x-usb-phy";
+				reg = <0x47401300 0x100>;
+				reg-names = "phy";
+				ti,ctrl_mod = <&usb_ctrl_mod>;
+				#phy-cells = <0>;
+			};
+
+			usb0: usb@47401000 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401400 0x400
+				       0x47401000 0x200>;
+				reg-names = "mc", "control";
+
+				interrupts = <18>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb0_phy>;
+
+				dmas = <&cppi41dma  0 0 &cppi41dma  1 0
+					&cppi41dma  2 0 &cppi41dma  3 0
+					&cppi41dma  4 0 &cppi41dma  5 0
+					&cppi41dma  6 0 &cppi41dma  7 0
+					&cppi41dma  8 0 &cppi41dma  9 0
+					&cppi41dma 10 0 &cppi41dma 11 0
+					&cppi41dma 12 0 &cppi41dma 13 0
+					&cppi41dma 14 0 &cppi41dma  0 1
+					&cppi41dma  1 1 &cppi41dma  2 1
+					&cppi41dma  3 1 &cppi41dma  4 1
+					&cppi41dma  5 1 &cppi41dma  6 1
+					&cppi41dma  7 1 &cppi41dma  8 1
+					&cppi41dma  9 1 &cppi41dma 10 1
+					&cppi41dma 11 1 &cppi41dma 12 1
+					&cppi41dma 13 1 &cppi41dma 14 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			usb1: usb@47401800 {
+				compatible = "ti,musb-am33xx";
+				reg = <0x47401c00 0x400
+					0x47401800 0x200>;
+				reg-names = "mc", "control";
+				interrupts = <19>;
+				interrupt-names = "mc";
+				dr_mode = "otg";
+				mentor,multipoint = <1>;
+				mentor,num-eps = <16>;
+				mentor,ram-bits = <12>;
+				mentor,power = <500>;
+				phys = <&usb1_phy>;
+
+				dmas = <&cppi41dma 15 0 &cppi41dma 16 0
+					&cppi41dma 17 0 &cppi41dma 18 0
+					&cppi41dma 19 0 &cppi41dma 20 0
+					&cppi41dma 21 0 &cppi41dma 22 0
+					&cppi41dma 23 0 &cppi41dma 24 0
+					&cppi41dma 25 0 &cppi41dma 26 0
+					&cppi41dma 27 0 &cppi41dma 28 0
+					&cppi41dma 29 0 &cppi41dma 15 1
+					&cppi41dma 16 1 &cppi41dma 17 1
+					&cppi41dma 18 1 &cppi41dma 19 1
+					&cppi41dma 20 1 &cppi41dma 21 1
+					&cppi41dma 22 1 &cppi41dma 23 1
+					&cppi41dma 24 1 &cppi41dma 25 1
+					&cppi41dma 26 1 &cppi41dma 27 1
+					&cppi41dma 28 1 &cppi41dma 29 1>;
+				dma-names =
+					"rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
+					"rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
+					"rx14", "rx15",
+					"tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
+					"tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
+					"tx14", "tx15";
+			};
+
+			cppi41dma: dma-controller@47402000 {
+				compatible = "ti,am3359-cppi41";
+				reg =  <0x47400000 0x1000
+					0x47402000 0x1000
+					0x47403000 0x1000
+					0x47404000 0x4000>;
+				reg-names = "glue", "controller", "scheduler", "queuemgr";
+				interrupts = <17>;
+				interrupt-names = "glue";
+				#dma-cells = <2>;
+				/* For backwards compatibility: */
+				#dma-channels = <30>;
+				dma-channels = <30>;
+				#dma-requests = <256>;
+				dma-requests = <256>;
+			};
+		};
+
+		/*
+		 * See TRM "Table 1-317. L4LS Instance Summary" for hints.
+		 * It shows the module target agent registers though, so the
+		 * actual device is typically 0x1000 before the target agent
+		 * except in cases where the module is larger than 0x1000.
+		 */
+		l4ls: l4ls@48000000 {
+			compatible = "ti,dm814-l4ls", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48000000 0x2000000>;
+
+			i2c1: i2c@28000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c1";
+				reg = <0x28000 0x1000>;
+				interrupts = <70>;
+			};
+
+			elm: elm@80000 {
+				compatible = "ti,814-elm";
+				ti,hwmods = "elm";
+				reg = <0x80000 0x2000>;
+				interrupts = <4>;
+			};
+
+			gpio1: gpio@32000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio1";
+				ti,gpio-always-on;
+				reg = <0x32000 0x2000>;
+				interrupts = <96>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@4c000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio2";
+				ti,gpio-always-on;
+				reg = <0x4c000 0x2000>;
+				interrupts = <98>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@1ac000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio3";
+				ti,gpio-always-on;
+				reg = <0x1ac000 0x2000>;
+				interrupts = <32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@1ae000 {
+				compatible = "ti,omap4-gpio";
+				ti,hwmods = "gpio4";
+				ti,gpio-always-on;
+				reg = <0x1ae000 0x2000>;
+				interrupts = <62>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c2: i2c@2a000 {
+				compatible = "ti,omap4-i2c";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "i2c2";
+				reg = <0x2a000 0x1000>;
+				interrupts = <71>;
+			};
+
+			mcspi1: spi@30000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x30000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <65>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi1";
+				dmas = <&edma 16 0 &edma 17 0
+					&edma 18 0 &edma 19 0
+					&edma 20 0 &edma 21 0
+					&edma 22 0 &edma 23 0>;
+
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					"tx2", "rx2", "tx3", "rx3";
+			};
+
+			mcspi2: spi@1a0000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x1a0000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <125>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi2";
+				dmas = <&edma 42 0 &edma 43 0
+					&edma 44 0 &edma 45 0>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+			};
+
+			/* Board must configure dmas with edma_xbar for EDMA */
+			mcspi3: spi@1a2000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x1a2000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <126>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi3";
+			};
+
+			mcspi4: spi@1a4000 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x1a4000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <127>;
+				ti,spi-num-cs = <4>;
+				ti,hwmods = "mcspi4";
+			};
+
+			timer1_target: target-module@2e000 {
+				compatible = "ti,sysc-omap4-timer", "ti,sysc";
+				reg = <0x2e000 0x4>,
+				      <0x2e010 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>,
+						<SYSC_IDLE_SMART>,
+						<SYSC_IDLE_SMART_WKUP>;
+				clocks = <&timer1_fck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x2e000 0x1000>;
+
+				timer1: timer@0 {
+					compatible = "ti,am335x-timer-1ms";
+					reg = <0x0 0x400>;
+					interrupts = <67>;
+					ti,timer-alwon;
+					clocks = <&timer1_fck>;
+					clock-names = "fck";
+				};
+			};
+
+			uart1: serial@20000 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				ti,hwmods = "uart1";
+				reg = <0x20000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <72>;
+				dmas = <&edma 26 0 &edma 27 0>;
+				dma-names = "tx", "rx";
+			};
+
+			uart2: serial@22000 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				ti,hwmods = "uart2";
+				reg = <0x22000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <73>;
+				dmas = <&edma 28 0 &edma 29 0>;
+				dma-names = "tx", "rx";
+			};
+
+			uart3: serial@24000 {
+				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				ti,hwmods = "uart3";
+				reg = <0x24000 0x2000>;
+				clock-frequency = <48000000>;
+				interrupts = <74>;
+				dmas = <&edma 30 0 &edma 31 0>;
+				dma-names = "tx", "rx";
+			};
+
+			timer2_target: target-module@40000 {
+				compatible = "ti,sysc-omap4-timer", "ti,sysc";
+				reg = <0x40000 0x4>,
+				      <0x40010 0x4>;
+				reg-names = "rev", "sysc";
+				ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>,
+						<SYSC_IDLE_SMART>,
+						<SYSC_IDLE_SMART_WKUP>;
+				clocks = <&timer2_fck>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x40000 0x1000>;
+
+				timer2: timer@0 {
+					compatible = "ti,dm814-timer";
+					reg = <0 0x1000>;
+					interrupts = <68>;
+					clocks = <&timer2_fck>;
+					clock-names = "fck";
+				};
+			};
+
+			timer3: timer@42000 {
+				compatible = "ti,dm814-timer";
+				reg = <0x42000 0x2000>;
+				interrupts = <69>;
+				ti,hwmods = "timer3";
+			};
+
+			mmc1: mmc@60000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc1";
+				dmas = <&edma 24 0
+					&edma 25 0>;
+				dma-names = "tx", "rx";
+				interrupts = <64>;
+				interrupt-parent = <&intc>;
+				reg = <0x60000 0x1000>;
+			};
+
+			rtc: rtc@c0000 {
+				compatible = "ti,am3352-rtc", "ti,da830-rtc";
+				reg = <0xc0000 0x1000>;
+				interrupts = <75 76>;
+				ti,hwmods = "rtc";
+			};
+
+			mmc2: mmc@1d8000 {
+				compatible = "ti,omap4-hsmmc";
+				ti,hwmods = "mmc2";
+				dmas = <&edma 2 0
+					&edma 3 0>;
+				dma-names = "tx", "rx";
+				interrupts = <28>;
+				interrupt-parent = <&intc>;
+				reg = <0x1d8000 0x1000>;
+			};
+
+			control: control@140000 {
+				compatible = "ti,dm814-scm", "simple-bus";
+				reg = <0x140000 0x20000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x140000 0x20000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0 0x800>;
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,dm814-phy-gmii-sel";
+						reg = <0x650 0x4>;
+						#phy-cells = <1>;
+					};
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+
+					scm_clockdomains: clockdomains {
+					};
+				};
+
+				usb_ctrl_mod: control@620 {
+					compatible = "ti,am335x-usb-ctrl-module";
+					reg = <0x620 0x10
+						0x648 0x4>;
+					reg-names = "phy_ctrl", "wakeup";
+				};
+
+				edma_xbar: dma-router@f90 {
+					compatible = "ti,am335x-edma-crossbar";
+					reg = <0xf90 0x40>;
+					#dma-cells = <3>;
+					dma-requests = <32>;
+					dma-masters = <&edma>;
+				};
+
+				/*
+				 * Note that silicon revision 2.1 and older
+				 * require input enabled (bit 18 set) for all
+				 * 3.3V I/Os to avoid cumulative hardware damage.
+				 * For more info, see errata advisory 2.1.87.
+				 * We leave bit 18 out of function-mask and rely
+				 * on the bootloader for it.
+				 */
+				pincntl: pinmux@800 {
+					compatible = "pinctrl-single";
+					reg = <0x800 0x438>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x307ff>;
+				};
+
+				usb1_phy: usb-phy@1b00 {
+					compatible = "ti,am335x-usb-phy";
+					reg = <0x1b00 0x100>;
+					reg-names = "phy";
+					ti,ctrl_mod = <&usb_ctrl_mod>;
+					#phy-cells = <0>;
+				};
+			};
+
+			prcm: prcm@180000 {
+				compatible = "ti,dm814-prcm", "simple-bus";
+				reg = <0x180000 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x180000 0x2000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			/* See TRM PLL_SUBSYS_BASE and "PLLSS Registers" */
+			pllss: pllss@1c5000 {
+				compatible = "ti,dm814-pllss", "simple-bus";
+				reg = <0x1c5000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x1c5000 0x1000>;
+
+				pllss_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				pllss_clockdomains: clockdomains {
+				};
+			};
+
+			wdt1: wdt@1c7000 {
+				compatible = "ti,omap3-wdt";
+				ti,hwmods = "wd_timer";
+				reg = <0x1c7000 0x1000>;
+				interrupts = <91>;
+			};
+		};
+
+		intc: interrupt-controller@48200000 {
+			compatible = "ti,dm814-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			reg = <0x48200000 0x1000>;
+		};
+
+		/* Board must configure evtmux with edma_xbar for EDMA */
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			ti,hwmods = "mmc3";
+			interrupts = <29>;
+			interrupt-parent = <&intc>;
+			reg = <0x47810000 0x1000>;
+		};
+
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM814_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM814_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		/* See TRM "Table 1-318. L4HS Instance Summary" */
+		l4hs: l4hs@4a000000 {
+			compatible = "ti,dm814-l4hs", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x4a000000 0x1b4040>;
+
+			target-module@100000 {
+				compatible = "ti,sysc-omap4-simple", "ti,sysc";
+				reg = <0x100900 0x4>,
+				      <0x100908 0x4>,
+				      <0x100904 0x4>;
+				reg-names = "rev", "sysc", "syss";
+				ti,sysc-mask = <0>;
+				ti,sysc-midle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+						<SYSC_IDLE_NO>;
+				ti,syss-mask = <1>;
+				clocks = <&alwon_ethernet_clkctrl DM814_ETHERNET_CPGMAC0_CLKCTRL 0>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x100000 0x8000>;
+
+				mac: ethernet@0 {
+					compatible = "ti,cpsw";
+					clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+					clock-names = "fck", "cpts";
+					cpdma_channels = <8>;
+					ale_entries = <1024>;
+					bd_ram_size = <0x2000>;
+					mac_control = <0x20>;
+					slaves = <2>;
+					active_slave = <0>;
+					cpts_clock_mult = <0x80000000>;
+					cpts_clock_shift = <29>;
+					reg = <0 0x800>,
+					      <0x900 0x100>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					/*
+					* c0_rx_thresh_pend
+					* c0_rx_pend
+					* c0_tx_pend
+					* c0_misc_pend
+					*/
+					interrupts = <40 41 42 43>;
+					ranges = <0 0 0x8000>;
+					syscon = <&scm_conf>;
+
+					davinci_mdio: mdio@800 {
+						compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+						clocks = <&cpsw_125mhz_gclk>;
+						clock-names = "fck";
+						#address-cells = <1>;
+						#size-cells = <0>;
+						bus_freq = <1000000>;
+						reg = <0x800 0x100>;
+					};
+
+					cpsw_emac0: slave@200 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
+
+					cpsw_emac1: slave@300 {
+						/* Filled in by U-Boot */
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
+			};
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			ti,no-idle-on-init;
+			reg = <0x50000000 0x2000>;
+			interrupts = <100>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+#include "dm814x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&devosc_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&devosc_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 169a85578fc9..244a957f9ba3 100644
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -1,29 +1,32 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 /dts-v1/;
 
 #include "dm816x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "DM8168 EVM";
-	compatible = "ti,dm8168-evm", "ti,dm8168";
+	compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x40000000	/* 1 GB */
 		       0xc0000000 0x40000000>;	/* 1 GB */
 	};
 
 	/* FDC6331L controlled by SD_POW pin */
-	vmmcsd_fixed: fixedregulator@0 {
+	vmmcsd_fixed: fixedregulator0 {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 	};
+
+	sata_refclk: fixedclock0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
 };
 
 &dm816x_pinmux {
@@ -61,6 +64,34 @@
 			DM816X_IOPAD(0x0d08, MUX_MODE0)			/* USB1_DRVVBUS */
 		>;
 	};
+
+	nandflash_pins: nandflash_pins {
+		pinctrl-single,pins = <
+			DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)		/* PINCTRL207 GPMC_CS0*/
+			DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)		/* PINCTRL217 GPMC_ADV_ALE */
+			DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0)	/* PINCTRL214 GPMC_OE_RE */
+			DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0)		/* PINCTRL215 GPMC_BE0_CLE */
+			DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0)		/* PINCTRL213 GPMC_WE */
+			DM816X_IOPAD(0x0b6c, MUX_MODE0)				/* PINCTRL220 GPMC_WAIT */
+			DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0)		/* PINCTRL250 GPMC_CLK */
+			DM816X_IOPAD(0x0ba4, MUX_MODE0)				/* PINCTRL234 GPMC_D0 */
+			DM816X_IOPAD(0x0ba8, MUX_MODE0)				/* PINCTRL234 GPMC_D1 */
+			DM816X_IOPAD(0x0bac, MUX_MODE0)				/* PINCTRL234 GPMC_D2 */
+			DM816X_IOPAD(0x0bb0, MUX_MODE0)				/* PINCTRL234 GPMC_D3 */
+			DM816X_IOPAD(0x0bb4, MUX_MODE0)				/* PINCTRL234 GPMC_D4 */
+			DM816X_IOPAD(0x0bb8, MUX_MODE0)				/* PINCTRL234 GPMC_D5 */
+			DM816X_IOPAD(0x0bbc, MUX_MODE0)				/* PINCTRL234 GPMC_D6 */
+			DM816X_IOPAD(0x0bc0, MUX_MODE0)				/* PINCTRL234 GPMC_D7 */
+			DM816X_IOPAD(0x0bc4, MUX_MODE0)				/* PINCTRL234 GPMC_D8 */
+			DM816X_IOPAD(0x0bc8, MUX_MODE0)				/* PINCTRL234 GPMC_D9 */
+			DM816X_IOPAD(0x0bcc, MUX_MODE0)				/* PINCTRL234 GPMC_D10 */
+			DM816X_IOPAD(0x0bd0, MUX_MODE0)				/* PINCTRL234 GPMC_D11 */
+			DM816X_IOPAD(0x0bd4, MUX_MODE0)				/* PINCTRL234 GPMC_D12 */
+			DM816X_IOPAD(0x0bd8, MUX_MODE0)				/* PINCTRL234 GPMC_D13 */
+			DM816X_IOPAD(0x0bdc, MUX_MODE0)				/* PINCTRL234 GPMC_D14 */
+			DM816X_IOPAD(0x0be0, MUX_MODE0)				/* PINCTRL234 GPMC_D15 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -83,13 +114,21 @@
 
 &gpmc {
 	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+	pinctrl-names = "default";
+	pinctrl-0 = <&nandflash_pins>;
 
 	nand@0,0 {
-		linux,mtd-name= "micron,mt29f2g16aadwp";
+		compatible = "ti,omap2-nand";
+		linux,mtd-name = "micron,mt29f2g16aadwp";
 		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
 		gpmc,device-width = <2>;
 		gpmc,sync-clk-ps = <0>;
@@ -106,31 +145,28 @@
 		gpmc,access-ns = <64>;
 		gpmc,rd-cycle-ns = <82>;
 		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-access-ns = <40>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		partition@0 {
 			label = "X-Loader";
 			reg = <0 0x80000>;
 		};
-		partition@0x80000 {
+		partition@80000 {
 			label = "U-Boot";
 			reg = <0x80000 0x1c0000>;
 		};
-		partition@0x1c0000 {
+		partition@1c0000 {
 			label = "Environment";
 			reg = <0x240000 0x40000>;
 		};
-		partition@0x280000 {
+		partition@280000 {
 			label = "Kernel";
 			reg = <0x280000 0x500000>;
 		};
-		partition@0x780000 {
+		partition@780000 {
 			label = "Filesystem";
 			reg = <0x780000 0xf880000>;
 		};
@@ -141,7 +177,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "w25x32";
 		spi-max-frequency = <48000000>;
 		reg = <0>;
@@ -156,7 +192,7 @@
 	vmmc-supply = <&vmmcsd_fixed>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */
@@ -171,3 +207,7 @@
 	pinctrl-0 = <&usb1_pins>;
 	mentor,multipoint = <0>;
 };
+
+&sata {
+	clocks = <&sysclk5_ck>, <&sata_refclk>;
+};
diff --git a/arch/arm/boot/dts/dm816x-clocks.dtsi b/arch/arm/boot/dts/dm816x-clocks.dtsi
index 50d9d338fbe9..338449b32a18 100644
--- a/arch/arm/boot/dts/dm816x-clocks.dtsi
+++ b/arch/arm/boot/dts/dm816x-clocks.dtsi
@@ -1,8 +1,4 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
 &scrm {
 	main_fapll: main_fapll {
@@ -86,7 +82,7 @@
 
 /* 0x48180000 */
 &prcm_clocks {
-	clkout_pre_ck: clkout_pre_ck {
+	clkout_pre_ck: clkout_pre_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&main_fapll 5 &ddr_fapll 1 &video_fapll 1
@@ -94,7 +90,7 @@
 		reg = <0x100>;
 	};
 
-	clkout_div_ck: clkout_div_ck {
+	clkout_div_ck: clkout_div_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&clkout_pre_ck>;
@@ -103,7 +99,7 @@
 		reg = <0x100>;
 	};
 
-	clkout_ck: clkout_ck {
+	clkout_ck: clkout_ck@100 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&clkout_div_ck>;
@@ -112,7 +108,7 @@
 	};
 
 	/* CM_DPLL clocks p1795 */
-	sysclk1_ck: sysclk1_ck {
+	sysclk1_ck: sysclk1_ck@300 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 1>;
@@ -120,7 +116,7 @@
 		reg = <0x0300>;
 	};
 
-	sysclk2_ck: sysclk2_ck {
+	sysclk2_ck: sysclk2_ck@304 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 2>;
@@ -128,7 +124,7 @@
 		reg = <0x0304>;
 	};
 
-	sysclk3_ck: sysclk3_ck {
+	sysclk3_ck: sysclk3_ck@308 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 3>;
@@ -136,7 +132,7 @@
 		reg = <0x0308>;
 	};
 
-	sysclk4_ck: sysclk4_ck {
+	sysclk4_ck: sysclk4_ck@30c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 4>;
@@ -144,7 +140,7 @@
 		reg = <0x030c>;
 	};
 
-	sysclk5_ck: sysclk5_ck {
+	sysclk5_ck: sysclk5_ck@310 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&sysclk4_ck>;
@@ -152,7 +148,7 @@
 		reg = <0x0310>;
 	};
 
-	sysclk6_ck: sysclk6_ck {
+	sysclk6_ck: sysclk6_ck@314 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 4>;
@@ -160,7 +156,7 @@
 		reg = <0x0314>;
 	};
 
-	sysclk10_ck: sysclk10_ck {
+	sysclk10_ck: sysclk10_ck@324 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&ddr_fapll 2>;
@@ -168,7 +164,7 @@
 		reg = <0x0324>;
 	};
 
-	sysclk24_ck: sysclk24_ck {
+	sysclk24_ck: sysclk24_ck@3b4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&main_fapll 5>;
@@ -176,7 +172,7 @@
 		reg = <0x03b4>;
 	};
 
-	mpu_ck: mpu_ck {
+	mpu_ck: mpu_ck@15dc {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
 		clocks = <&sysclk2_ck>;
@@ -184,7 +180,7 @@
                 reg = <0x15dc>;
 	};
 
-	audio_pll_a_ck: audio_pll_a_ck {
+	audio_pll_a_ck: audio_pll_a_ck@35c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
 		clocks = <&audio_fapll 1>;
@@ -192,59 +188,89 @@
 		reg = <0x035c>;
 	};
 
-	sysclk18_ck: sysclk18_ck {
+	sysclk18_ck: sysclk18_ck@378 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&sys_32k_ck>, <&audio_pll_a_ck>;
 		reg = <0x0378>;
 	};
 
-	timer1_fck: timer1_fck {
+	timer1_fck: timer1_fck@390 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0390>;
 	};
 
-	timer2_fck: timer2_fck {
+	timer2_fck: timer2_fck@394 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0394>;
 	};
 
-	timer3_fck: timer3_fck {
+	timer3_fck: timer3_fck@398 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x0398>;
 	};
 
-	timer4_fck: timer4_fck {
+	timer4_fck: timer4_fck@39c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x039c>;
 	};
 
-	timer5_fck: timer5_fck {
+	timer5_fck: timer5_fck@3a0 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x03a0>;
 	};
 
-	timer6_fck: timer6_fck {
+	timer6_fck: timer6_fck@3a4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x03a4>;
 	};
 
-	timer7_fck: timer7_fck {
+	timer7_fck: timer7_fck@3a8 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
 		clocks = <&tclkin_ck>, <&sysclk18_ck>, <&sys_clkin_ck>;
 		reg = <0x03a8>;
 	};
 };
+
+&prcm {
+	default_cm: default_cm@500 {
+		compatible = "ti,omap4-cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		default_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x5c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	alwon_cm: alwon_cm@1400 {
+		compatible = "ti,omap4-cm";
+		reg = <0x1400 0x300>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1400 0x300>;
+
+		alwon_clkctrl: clk@0 {
+			compatible = "ti,clkctrl";
+			reg = <0x0 0x208>;
+			#clock-cells = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 289806adb343..b68686f0643b 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -1,17 +1,16 @@
-/*
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
 
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dm816.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/omap.h>
 
-#include "skeleton.dtsi"
-
 / {
 	compatible = "ti,dm816";
 	interrupt-parent = <&intc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -58,17 +57,19 @@
 	 * the whole bus hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
+		compatible = "simple-bus";
 		reg = <0x44000000 0x10000>;
 		interrupts = <9 10>;
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
-		ti,hwmods = "l3_main";
 
 		prcm: prcm@48180000 {
-			compatible = "ti,dm816-prcm";
+			compatible = "ti,dm816-prcm", "simple-bus";
 			reg = <0x48180000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x48180000 0x4000>;
 
 			prcm_clocks: clocks {
 				#address-cells = <1>;
@@ -84,6 +85,7 @@
 			reg = <0x48140000 0x21000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			ranges = <0 0x48140000 0x21000>;
 
 			dm816x_pinmux: pinmux@800 {
@@ -91,6 +93,7 @@
 				reg = <0x800 0x50a>;
 				#address-cells = <1>;
 				#size-cells = <0>;
+				#pinctrl-cells = <1>;
 				pinctrl-single,register-width = <16>;
 				pinctrl-single,function-mask = <0xf>;
 			};
@@ -133,17 +136,127 @@
 			};
 		};
 
-		edma: edma@49000000 {
-			compatible = "ti,edma3";
-			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2", "tptc3";
-			reg =   <0x49000000 0x10000>,
-			        <0x44e10f90 0x40>;
-			interrupts = <12 13 14>;
-			#dma-cells = <1>;
+		target-module@49000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49000000 0x4>;
+			reg-names = "rev";
+			clocks = <&alwon_clkctrl DM816_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49000000 0x10000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x10000>;
+				reg-names = "edma3_cc";
+				interrupts = <12 13 14>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
+					   <&edma_tptc2 3>, <&edma_tptc3 0>;
+
+				ti,edma-memcpy-channels = <20 21>;
+			};
+		};
+
+		target-module@49800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49800000 0x4>,
+			      <0x49800010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49800000 0x100000>;
+
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <112>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49900000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49900000 0x4>,
+			      <0x49900010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49900000 0x100000>;
+
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <113>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49a00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49a00000 0x4>,
+			      <0x49a00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49a00000 0x100000>;
+
+			edma_tptc2: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <114>;
+				interrupt-names = "edma3_tcerrint";
+			};
+		};
+
+		target-module@49b00000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x49b00000 0x4>,
+			      <0x49b00010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&alwon_clkctrl DM816_TPTC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x49b00000 0x100000>;
+
+			edma_tptc3: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <115>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
 		elm: elm@48080000 {
-			compatible = "ti,816-elm";
+			compatible = "ti,am3352-elm";
 			ti,hwmods = "elm";
 			reg = <0x48080000 0x2000>;
 			interrupts = <4>;
@@ -180,8 +293,14 @@
 			#address-cells = <2>;
 			#size-cells = <1>;
 			interrupts = <100>;
+			dmas = <&edma 52 0>;
+			dma-names = "rxtx";
 			gpmc,num-cs = <6>;
 			gpmc,num-waitpins = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
 		};
 
 		i2c1: i2c@48028000 {
@@ -191,8 +310,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <70>;
-			dmas = <&edma 58 &edma 59>;
-			dma-names = "tx", "rx";
 		};
 
 		i2c2: i2c@4802a000 {
@@ -202,8 +319,6 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <71>;
-			dmas = <&edma 60 &edma 61>;
-			dma-names = "tx", "rx";
 		};
 
 		intc: interrupt-controller@48200000 {
@@ -213,19 +328,34 @@
 			reg = <0x48200000 0x1000>;
 		};
 
+		rtc: rtc@480c0000 {
+			compatible = "ti,am3352-rtc", "ti,da830-rtc";
+			reg = <0x480c0000 0x1000>;
+			interrupts = <75 76>;
+			ti,hwmods = "rtc";
+		};
+
 		mailbox: mailbox@480c8000 {
 			compatible = "ti,omap4-mailbox";
 			reg = <0x480c8000 0x2000>;
 			interrupts = <77>;
 			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
 			ti,mbox-num-users = <4>;
 			ti,mbox-num-fifos = <12>;
-			mbox_dsp: mbox_dsp {
+			mbox_dsp: mbox-dsp {
 				ti,mbox-tx = <3 0 0>;
 				ti,mbox-rx = <0 0 0>;
 			};
 		};
 
+		spinbox: spinbox@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x2000>;
+			ti,hwmods = "spinbox";
+			#hwlock-cells = <1>;
+		};
+
 		mdio: mdio@4a100800 {
 			compatible = "ti,davinci_mdio";
 			#address-cells = <1>;
@@ -270,6 +400,13 @@
 			phy-handle = <&phy1>;
 		};
 
+		sata: sata@4a140000 {
+			compatible = "ti,dm816-ahci";
+			reg = <0x4a140000 0x10000>;
+			interrupts = <16>;
+			ti,hwmods = "sata";
+		};
+
 		mcspi1: spi@48030000 {
 			compatible = "ti,omap4-mcspi";
 			reg = <0x48030000 0x1000>;
@@ -278,9 +415,12 @@
 			interrupts = <65>;
 			ti,spi-num-cs = <4>;
 			ti,hwmods = "mcspi1";
-			dmas = <&edma 16 &edma 17
-				&edma 18 &edma 19>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
+			dmas = <&edma 16 0 &edma 17 0
+				&edma 18 0 &edma 19 0
+				&edma 20 0 &edma 21 0
+				&edma 22 0 &edma 23 0>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
 		};
 
 		mmc1: mmc@48060000 {
@@ -288,23 +428,59 @@
 			reg = <0x48060000 0x11000>;
 			ti,hwmods = "mmc1";
 			interrupts = <64>;
-			dmas = <&edma 24 &edma 25>;
+			dmas = <&edma 24 0 &edma 25 0>;
 			dma-names = "tx", "rx";
 		};
 
-		timer1: timer@4802e000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x4802e000 0x2000>;
-			interrupts = <67>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
+		timer1_target: target-module@4802e000 {
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x4802e000 0x4>,
+			      <0x4802e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4802e000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,dm816-timer";
+				reg = <0 0x1000>;
+				interrupts = <67>;
+				ti,timer-alwon;
+				clocks = <&alwon_clkctrl DM816_TIMER1_CLKCTRL 0>;
+				clock-names = "fck";
+			};
 		};
 
-		timer2: timer@48040000 {
-			compatible = "ti,dm816-timer";
-			reg = <0x48040000 0x2000>;
-			interrupts = <68>;
-			ti,hwmods = "timer2";
+		timer2_target: target-module@48040000 {
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x48040000 0x4>,
+			      <0x48040010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48040000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,dm816-timer";
+				reg = <0 0x1000>;
+				interrupts = <68>;
+				clocks = <&alwon_clkctrl DM816_TIMER2_CLKCTRL 0>;
+				clock-names = "fck";
+			};
 		};
 
 		timer3: timer@48042000 {
@@ -319,6 +495,7 @@
 			reg = <0x48044000 0x2000>;
 			interrupts = <92>;
 			ti,hwmods = "timer4";
+			ti,timer-pwm;
 		};
 
 		timer5: timer@48046000 {
@@ -326,6 +503,7 @@
 			reg = <0x48046000 0x2000>;
 			interrupts = <93>;
 			ti,hwmods = "timer5";
+			ti,timer-pwm;
 		};
 
 		timer6: timer@48048000 {
@@ -333,6 +511,7 @@
 			reg = <0x48048000 0x2000>;
 			interrupts = <94>;
 			ti,hwmods = "timer6";
+			ti,timer-pwm;
 		};
 
 		timer7: timer@4804a000 {
@@ -340,35 +519,36 @@
 			reg = <0x4804a000 0x2000>;
 			interrupts = <95>;
 			ti,hwmods = "timer7";
+			ti,timer-pwm;
 		};
 
-		uart1: uart@48020000 {
-			compatible = "ti,omap3-uart";
+		uart1: serial@48020000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart1";
 			reg = <0x48020000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <72>;
-			dmas = <&edma 26 &edma 27>;
+			dmas = <&edma 26 0 &edma 27 0>;
 			dma-names = "tx", "rx";
 		};
 
-		uart2: uart@48022000 {
-			compatible = "ti,omap3-uart";
+		uart2: serial@48022000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart2";
 			reg = <0x48022000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <73>;
-			dmas = <&edma 28 &edma 29>;
+			dmas = <&edma 28 0 &edma 29 0>;
 			dma-names = "tx", "rx";
 		};
 
-		uart3: uart@48024000 {
-			compatible = "ti,omap3-uart";
+		uart3: serial@48024000 {
+			compatible = "ti,am3352-uart", "ti,omap3-uart";
 			ti,hwmods = "uart3";
 			reg = <0x48024000 0x2000>;
 			clock-frequency = <48000000>;
 			interrupts = <74>;
-			dmas = <&edma 30 &edma 31>;
+			dmas = <&edma 30 0 &edma 31 0>;
 			dma-names = "tx", "rx";
 		};
 
@@ -471,8 +651,11 @@
 				interrupts = <17>;
 				interrupt-names = "glue";
 				#dma-cells = <2>;
+				/* For backwards compatibility: */
 				#dma-channels = <30>;
+				dma-channels = <30>;
 				#dma-requests = <256>;
+				dma-requests = <256>;
 			};
 		};
 
@@ -486,3 +669,23 @@
 };
 
 #include "dm816x-clocks.dtsi"
+
+/* Preferred always-on timer for clocksource */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer1_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
+
+/* Preferred timer for clockevent */
+&timer2_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&timer2_fck>;
+		assigned-clock-parents = <&sys_clkin_ck>;
+	};
+};
diff --git a/arch/arm/boot/dts/dove-cm-a510.dtsi b/arch/arm/boot/dts/dove-cm-a510.dtsi
index 59b4056b478f..1082fdfbfe60 100644
--- a/arch/arm/boot/dts/dove-cm-a510.dtsi
+++ b/arch/arm/boot/dts/dove-cm-a510.dtsi
@@ -13,17 +13,17 @@
  *     published by the Free Software Foundation; version 2 of the
  *     License.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -32,11 +32,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -101,7 +101,7 @@
 		pinctrl-0 = <&pmx_nand_gpo>;
 		pinctrl-names = "default";
 
-		system {
+		led-system {
 			label = "cm-a510:system:green";
 			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
@@ -124,9 +124,17 @@
 };
 
 /* Optional RTL8211D GbE PHY on SMI address 0x03 */
-&ethphy {
-	reg = <3>;
-	status = "disabled";
+&mdio {
+	ethphy: ethernet-phy@3 {
+		reg = <3>;
+		status = "disabled";
+	};
+};
+
+&eth {
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
 };
 
 &i2c0 {
diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts
index e28ef056dd17..ad361ec1361d 100644
--- a/arch/arm/boot/dts/dove-cubox-es.dts
+++ b/arch/arm/boot/dts/dove-cubox-es.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 #include "dove-cubox.dts"
 
 / {
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
index e6fa251e17b9..dbba0c8cdab1 100644
--- a/arch/arm/boot/dts/dove-cubox.dts
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "dove.dtsi"
@@ -20,7 +21,7 @@
 		pinctrl-0 = <&pmx_gpio_18>;
 		pinctrl-names = "default";
 
-		power {
+		led-power {
 			label = "Power";
 			gpios = <&gpio0 18 1>;
 			default-state = "keep";
@@ -62,23 +63,38 @@
 		pinctrl-0 = <&pmx_gpio_19>;
 		pinctrl-names = "default";
 	};
+
+	gpu-subsystem {
+		status = "okay";
+	};
 };
 
 &uart0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &mdio { status = "okay"; };
-&eth { status = "okay"; };
+&eth {
+	status = "okay";
+	ethernet-port@0 {
+		phy-handle = <&ethphy>;
+	};
+};
 
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
+&mdio {
+	ethphy: ethernet-phy@1 {
+		compatible = "marvell,88e1310";
+		reg = <1>;
+	};
+};
+
+&gpu {
+	status = "okay";
 };
 
 &i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
 
-	si5351: clock-generator {
+	si5351: clock-generator@60 {
 		compatible = "silabs,si5351a-msop";
 		reg = <0x60>;
 		#address-cells = <1>;
@@ -118,7 +134,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,w25q32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d2plug.dts b/arch/arm/boot/dts/dove-d2plug.dts
index c11d3636c8e5..79ee2b32409d 100644
--- a/arch/arm/boot/dts/dove-d2plug.dts
+++ b/arch/arm/boot/dts/dove-d2plug.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "dove.dtsi"
@@ -20,17 +21,17 @@
 		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
 		pinctrl-names = "default";
 
-		wlan-ap {
+		led-wlan-ap {
 			label = "wlan-ap";
 			gpios = <&gpio0 0 1>;
 		};
 
-		wlan-act {
+		led-wlan-act {
 			label = "wlan-act";
 			gpios = <&gpio0 1 1>;
 		};
 
-		bluetooth-act {
+		led-bluetooth-act {
 			label = "bt-act";
 			gpios = <&gpio0 2 1>;
 		};
@@ -61,7 +62,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash Macronix MX25L3205D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l3205d";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-d3plug.dts b/arch/arm/boot/dts/dove-d3plug.dts
index f5f59bb5a534..5aa5d4a7d51d 100644
--- a/arch/arm/boot/dts/dove-d3plug.dts
+++ b/arch/arm/boot/dts/dove-d3plug.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "dove.dtsi"
@@ -20,17 +21,17 @@
 		pinctrl-0 = <&pmx_gpio_0 &pmx_gpio_1 &pmx_gpio_2>;
 		pinctrl-names = "default";
 
-		wlan-act {
+		led-wlan-act {
 			label = "wlan-act";
 			gpios = <&gpio0 0 1>;
 		};
 
-		wlan-ap {
+		led-wlan-ap {
 			label = "wlan-ap";
 			gpios = <&gpio0 1 1>;
 		};
 
-		status {
+		led-status {
 			label = "status";
 			gpios = <&gpio0 2 1>;
 		};
@@ -78,7 +79,7 @@
 	status = "okay";
 
 	/* spi0.0: 2M Flash Macronix MX25L1605D */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25l1605d";
 		spi-max-frequency = <86000000>;
 		reg = <0>;
@@ -88,7 +89,7 @@
 &pcie {
 	status = "okay";
 	/* Fresco Logic USB3.0 xHCI controller */
-	pcie-port@0 {
+	pcie@1 {
 		status = "okay";
 		reset-gpios = <&gpio0 26 1>;
 		reset-delay-us = <20000>;
@@ -96,7 +97,7 @@
 		pinctrl-names = "default";
 	};
 	/* Mini-PCIe slot */
-	pcie-port@1 {
+	pcie@2 {
 		status = "okay";
 		reset-gpios = <&gpio0 25 1>;
 	};
diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts
index bb725dca3a10..c1912dc6bfc3 100644
--- a/arch/arm/boot/dts/dove-dove-db.dts
+++ b/arch/arm/boot/dts/dove-dove-db.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
 #include "dove.dtsi"
@@ -26,7 +27,7 @@
 	status = "okay";
 
 	/* spi0.0: 4M Flash ST-M25P32-VMF6P */
-	spi-flash@0 {
+	flash@0 {
 		compatible = "st,m25p32";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/dove-sbc-a510.dts b/arch/arm/boot/dts/dove-sbc-a510.dts
index 288e707dea99..df021f9b0117 100644
--- a/arch/arm/boot/dts/dove-sbc-a510.dts
+++ b/arch/arm/boot/dts/dove-sbc-a510.dts
@@ -13,17 +13,17 @@
  *     published by the Free Software Foundation; version 2 of the
  *     License.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -32,11 +32,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -143,6 +143,7 @@
 	gpio_ext: gpio@20 {
 		compatible = "nxp,pca9555";
 		reg = <0x20>;
+		gpio-controller;
 		#gpio-cells = <2>;
 	};
 };
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 38b1f7e6004e..062c86361640 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -1,11 +1,12 @@
-/include/ "skeleton.dtsi"
-
+// SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
 	compatible = "marvell,dove";
 	model = "Marvell Armada 88AP510 SoC";
 	interrupt-parent = <&intc>;
@@ -33,6 +34,12 @@
 		marvell,tauros2-cache-features = <0>;
 	};
 
+	gpu-subsystem {
+		compatible = "marvell,dove-gpu-subsystem";
+		cores = <&gpu>;
+		status = "disabled";
+	};
+
 	i2c-mux {
 		compatible = "i2c-mux-pinctrl";
 		#address-cells = <1>;
@@ -83,7 +90,7 @@
 			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
 			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
 
-		pcie: pcie-controller {
+		pcie: pcie {
 			compatible = "marvell,dove-pcie";
 			status = "disabled";
 			device_type = "pci";
@@ -100,7 +107,7 @@
 				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
 				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
 
-			pcie0: pcie-port@0 {
+			pcie0: pcie@1 {
 				device_type = "pci";
 				status = "disabled";
 				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
@@ -112,16 +119,27 @@
 				#size-cells = <2>;
 				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
+				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
+				interrupt-names = "intx", "error";
+				interrupts = <16>, <15>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie0_intc 0>,
+						<0 0 0 2 &pcie0_intc 1>,
+						<0 0 0 3 &pcie0_intc 2>,
+						<0 0 0 4 &pcie0_intc 3>;
+
+				pcie0_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 
-			pcie1: pcie-port@1 {
+			pcie1: pcie@2 {
 				device_type = "pci";
 				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+				assigned-addresses = <0x82001000 0 0x80000 0 0x2000>;
 				reg = <0x1000 0 0 0 0>;
 				clocks = <&gate_clk 5>;
 				marvell,pcie-port = <1>;
@@ -130,10 +148,21 @@
 				#size-cells = <2>;
 				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				bus-range = <0x00 0xff>;
 
 				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
+				interrupt-names = "intx", "error";
+				interrupts = <18>, <17>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+						<0 0 0 2 &pcie1_intc 1>,
+						<0 0 0 3 &pcie1_intc 2>,
+						<0 0 0 4 &pcie1_intc 3>;
+
+				pcie1_intc: interrupt-controller {
+					interrupt-controller;
+					#interrupt-cells = <1>;
+				};
 			};
 		};
 
@@ -146,7 +175,7 @@
 				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
 				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
 
-			spi0: spi-ctrl@10600 {
+			spi0: spi@10600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -159,14 +188,13 @@
 				status = "disabled";
 			};
 
-			i2c: i2c-ctrl@11000 {
+			i2c: i2c@11000 {
 				compatible = "marvell,mv64xxx-i2c";
 				reg = <0x11000 0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <11>;
 				clock-frequency = <400000>;
-				timeout-ms = <1000>;
 				clocks = <&core_clk 0>;
 				status = "okay";
 			};
@@ -209,7 +237,7 @@
 				status = "disabled";
 			};
 
-			spi1: spi-ctrl@14600 {
+			spi1: spi@14600 {
 				compatible = "marvell,orion-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -239,7 +267,7 @@
 				marvell,#interrupts = <5>;
 			};
 
-			intc: main-interrupt-ctrl@20200 {
+			intc: interrupt-controller@20200 {
 				compatible = "marvell,orion-intc";
 				interrupt-controller;
 				#interrupt-cells = <1>;
@@ -263,12 +291,13 @@
 			};
 
 			crypto: crypto-engine@30000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x30000 0x10000>,
-				      <0xffffe000 0x800>;
-				reg-names = "regs", "sram";
+				compatible = "marvell,dove-crypto";
+				reg = <0x30000 0x10000>;
+				reg-names = "regs";
 				interrupts = <31>;
 				clocks = <&gate_clk 15>;
+				marvell,crypto-srams = <&crypto_sram>;
+				marvell,crypto-sram-size = <0x800>;
 				status = "okay";
 			};
 
@@ -353,7 +382,6 @@
 					interrupts = <29>;
 					/* overwrite MAC address in bootloader */
 					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
 				};
 			};
 
@@ -365,10 +393,6 @@
 				interrupts = <30>;
 				clocks = <&gate_clk 2>;
 				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
 			};
 
 			sdio0: sdio-host@92000 {
@@ -398,7 +422,7 @@
 				clocks = <&gate_clk 3>;
 				clock-names = "sata";
 				#phy-cells = <0>;
-				status = "ok";
+				status = "okay";
 			};
 
 			audio0: audio-controller@b0000 {
@@ -419,293 +443,331 @@
 				status = "disabled";
 			};
 
-			thermal: thermal-diode@d001c {
-				compatible = "marvell,dove-thermal";
-				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-			};
-
-			gate_clk: clock-gating-ctrl@d0038 {
-				compatible = "marvell,dove-gating-clock";
-				reg = <0xd0038 0x4>;
-				clocks = <&core_clk 0>;
-				#clock-cells = <1>;
-			};
-
-			pinctrl: pin-ctrl@d0200 {
-				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x14>,
-				      <0xd0440 0x04>;
-				clocks = <&gate_clk 22>;
-
-				pmx_gpio_0: pmx-gpio-0 {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_1: pmx-gpio-1 {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_2: pmx-gpio-2 {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_3: pmx-gpio-3 {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_4: pmx-gpio-4 {
-					marvell,pins = "mpp4";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_5: pmx-gpio-5 {
-					marvell,pins = "mpp5";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_6: pmx-gpio-6 {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_7: pmx-gpio-7 {
-					marvell,pins = "mpp7";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_8: pmx-gpio-8 {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_9: pmx-gpio-9 {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_pcie1_clkreq: pmx-pcie1-clkreq {
-					marvell,pins = "mpp9";
-					marvell,function = "pex1";
-				};
-
-				pmx_gpio_10: pmx-gpio-10 {
-					marvell,pins = "mpp10";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_11: pmx-gpio-11 {
-					marvell,pins = "mpp11";
-					marvell,function = "gpio";
-				};
-
-				pmx_pcie0_clkreq: pmx-pcie0-clkreq {
-					marvell,pins = "mpp11";
-					marvell,function = "pex0";
-				};
-
-				pmx_gpio_12: pmx-gpio-12 {
-					marvell,pins = "mpp12";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_13: pmx-gpio-13 {
-					marvell,pins = "mpp13";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_extclk: pmx-audio1-extclk {
-					marvell,pins = "mpp13";
-					marvell,function = "audio1";
-				};
-
-				pmx_gpio_14: pmx-gpio-14 {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_15: pmx-gpio-15 {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_16: pmx-gpio-16 {
-					marvell,pins = "mpp16";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_17: pmx-gpio-17 {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_18: pmx-gpio-18 {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_19: pmx-gpio-19 {
-					marvell,pins = "mpp19";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_20: pmx-gpio-20 {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_21: pmx-gpio-21 {
-					marvell,pins = "mpp21";
-					marvell,function = "gpio";
-				};
-
-				pmx_camera: pmx-camera {
-					marvell,pins = "mpp_camera";
-					marvell,function = "camera";
-				};
-
-				pmx_camera_gpio: pmx-camera-gpio {
-					marvell,pins = "mpp_camera";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio0: pmx-sdio0 {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "sdio0";
-				};
-
-				pmx_sdio0_gpio: pmx-sdio0-gpio {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio1: pmx-sdio1 {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "sdio1";
-				};
-
-				pmx_sdio1_gpio: pmx-sdio1-gpio {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_gpio: pmx-audio1-gpio {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "i2s1/spdifo";
-				};
-
-				pmx_spi0: pmx-spi0 {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "spi0";
-				};
-
-				pmx_spi0_gpio: pmx-spi0-gpio {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "gpio";
-				};
-
-				pmx_spi1_4_7: pmx-spi1-4-7 {
-					marvell,pins = "mpp4", "mpp5",
-						"mpp6", "mpp7";
-					marvell,function = "spi1";
-				};
-
-				pmx_spi1_20_23: pmx-spi1-20-23 {
-					marvell,pins = "mpp20", "mpp21",
-						"mpp22", "mpp23";
-					marvell,function = "spi1";
-				};
-
-				pmx_uart1: pmx-uart1 {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "uart1";
-				};
-
-				pmx_uart1_gpio: pmx-uart1-gpio {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "gpio";
-				};
-
-				pmx_nand: pmx-nand {
-					marvell,pins = "mpp_nand";
-					marvell,function = "nand";
-				};
-
-				pmx_nand_gpo: pmx-nand-gpo {
-					marvell,pins = "mpp_nand";
-					marvell,function = "gpo";
-				};
-
-				pmx_i2c1: pmx-i2c1 {
-					marvell,pins = "mpp17", "mpp19";
-					marvell,function = "twsi";
-				};
-
-				pmx_i2c2: pmx-i2c2 {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "twsi";
-				};
-
-				pmx_ssp_i2c2: pmx-ssp-i2c2 {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "ssp/twsi";
-				};
-
-				pmx_i2cmux_0: pmx-i2cmux-0 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt1";
-				};
-
-				pmx_i2cmux_1: pmx-i2cmux-1 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt2";
-				};
-
-				pmx_i2cmux_2: pmx-i2cmux-2 {
-					marvell,pins = "twsi";
-					marvell,function = "twsi-opt3";
-				};
-			};
-
-			core_clk: core-clocks@d0214 {
-				compatible = "marvell,dove-core-clock";
-				reg = <0xd0214 0x4>;
-				#clock-cells = <1>;
-			};
-
-			gpio0: gpio-ctrl@d0400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0400 0x20>;
-				ngpios = <32>;
+			pmu: power-management@d0000 {
+				compatible = "marvell,dove-pmu", "simple-bus";
+				reg = <0xd0000 0x8000>, <0xd8000 0x8000>;
+				ranges = <0x00000000 0x000d0000 0x8000
+					  0x00008000 0x000d8000 0x8000>;
+				interrupts = <33>;
 				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <12>, <13>, <14>, <60>;
-			};
-
-			gpio1: gpio-ctrl@d0420 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0420 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <61>;
-			};
-
-			rtc: real-time-clock@d8500 {
-				compatible = "marvell,orion-rtc";
-				reg = <0xd8500 0x20>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#interrupt-cells = <1>;
+				#reset-cells = <1>;
+
+				domains {
+					vpu_domain: vpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000008>;
+						marvell,pmu_iso_mask = <0x00000001>;
+						resets = <&pmu 16>;
+					};
+
+					gpu_domain: gpu-domain {
+						#power-domain-cells = <0>;
+						marvell,pmu_pwr_mask = <0x00000004>;
+						marvell,pmu_iso_mask = <0x00000002>;
+						resets = <&pmu 18>;
+					};
+				};
+
+				thermal: thermal-diode@1c {
+					compatible = "marvell,dove-thermal";
+					reg = <0x001c 0x0c>, <0x005c 0x08>;
+				};
+
+				gate_clk: clock-gating-ctrl@38 {
+					compatible = "marvell,dove-gating-clock";
+					reg = <0x0038 0x4>;
+					clocks = <&core_clk 0>;
+					#clock-cells = <1>;
+				};
+
+				divider_clk: core-clock@64 {
+					compatible = "marvell,dove-divider-clock";
+					reg = <0x0064 0x8>;
+					#clock-cells = <1>;
+				};
+
+				pinctrl: pin-ctrl@200 {
+					compatible = "marvell,dove-pinctrl";
+					reg = <0x0200 0x14>,
+					      <0x0440 0x04>;
+					clocks = <&gate_clk 22>;
+
+					pmx_gpio_0: pmx-gpio-0 {
+						marvell,pins = "mpp0";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_1: pmx-gpio-1 {
+						marvell,pins = "mpp1";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_2: pmx-gpio-2 {
+						marvell,pins = "mpp2";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_3: pmx-gpio-3 {
+						marvell,pins = "mpp3";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_4: pmx-gpio-4 {
+						marvell,pins = "mpp4";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_5: pmx-gpio-5 {
+						marvell,pins = "mpp5";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_6: pmx-gpio-6 {
+						marvell,pins = "mpp6";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_7: pmx-gpio-7 {
+						marvell,pins = "mpp7";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_8: pmx-gpio-8 {
+						marvell,pins = "mpp8";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_9: pmx-gpio-9 {
+						marvell,pins = "mpp9";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie1_clkreq: pmx-pcie1-clkreq {
+						marvell,pins = "mpp9";
+						marvell,function = "pex1";
+					};
+
+					pmx_gpio_10: pmx-gpio-10 {
+						marvell,pins = "mpp10";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_11: pmx-gpio-11 {
+						marvell,pins = "mpp11";
+						marvell,function = "gpio";
+					};
+
+					pmx_pcie0_clkreq: pmx-pcie0-clkreq {
+						marvell,pins = "mpp11";
+						marvell,function = "pex0";
+					};
+
+					pmx_gpio_12: pmx-gpio-12 {
+						marvell,pins = "mpp12";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_13: pmx-gpio-13 {
+						marvell,pins = "mpp13";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_extclk: pmx-audio1-extclk {
+						marvell,pins = "mpp13";
+						marvell,function = "audio1";
+					};
+
+					pmx_gpio_14: pmx-gpio-14 {
+						marvell,pins = "mpp14";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_15: pmx-gpio-15 {
+						marvell,pins = "mpp15";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_16: pmx-gpio-16 {
+						marvell,pins = "mpp16";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_17: pmx-gpio-17 {
+						marvell,pins = "mpp17";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_18: pmx-gpio-18 {
+						marvell,pins = "mpp18";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_19: pmx-gpio-19 {
+						marvell,pins = "mpp19";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_20: pmx-gpio-20 {
+						marvell,pins = "mpp20";
+						marvell,function = "gpio";
+					};
+
+					pmx_gpio_21: pmx-gpio-21 {
+						marvell,pins = "mpp21";
+						marvell,function = "gpio";
+					};
+
+					pmx_camera: pmx-camera {
+						marvell,pins = "mpp_camera";
+						marvell,function = "camera";
+					};
+
+					pmx_camera_gpio: pmx-camera-gpio {
+						marvell,pins = "mpp_camera";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio0: pmx-sdio0 {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "sdio0";
+					};
+
+					pmx_sdio0_gpio: pmx-sdio0-gpio {
+						marvell,pins = "mpp_sdio0";
+						marvell,function = "gpio";
+					};
+
+					pmx_sdio1: pmx-sdio1 {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "sdio1";
+					};
+
+					pmx_sdio1_gpio: pmx-sdio1-gpio {
+						marvell,pins = "mpp_sdio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_gpio: pmx-audio1-gpio {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "gpio";
+					};
+
+					pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "i2s1/spdifo";
+					};
+
+					pmx_spi0: pmx-spi0 {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "spi0";
+					};
+
+					pmx_spi0_gpio: pmx-spi0-gpio {
+						marvell,pins = "mpp_spi0";
+						marvell,function = "gpio";
+					};
+
+					pmx_spi1_4_7: pmx-spi1-4-7 {
+						marvell,pins = "mpp4", "mpp5",
+							"mpp6", "mpp7";
+						marvell,function = "spi1";
+					};
+
+					pmx_spi1_20_23: pmx-spi1-20-23 {
+						marvell,pins = "mpp20", "mpp21",
+							"mpp22", "mpp23";
+						marvell,function = "spi1";
+					};
+
+					pmx_uart1: pmx-uart1 {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "uart1";
+					};
+
+					pmx_uart1_gpio: pmx-uart1-gpio {
+						marvell,pins = "mpp_uart1";
+						marvell,function = "gpio";
+					};
+
+					pmx_nand: pmx-nand {
+						marvell,pins = "mpp_nand";
+						marvell,function = "nand";
+					};
+
+					pmx_nand_gpo: pmx-nand-gpo {
+						marvell,pins = "mpp_nand";
+						marvell,function = "gpo";
+					};
+
+					pmx_i2c1: pmx-i2c1 {
+						marvell,pins = "mpp17", "mpp19";
+						marvell,function = "twsi";
+					};
+
+					pmx_i2c2: pmx-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "twsi";
+					};
+
+					pmx_ssp_i2c2: pmx-ssp-i2c2 {
+						marvell,pins = "mpp_audio1";
+						marvell,function = "ssp/twsi";
+					};
+
+					pmx_i2cmux_0: pmx-i2cmux-0 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt1";
+					};
+
+					pmx_i2cmux_1: pmx-i2cmux-1 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt2";
+					};
+
+					pmx_i2cmux_2: pmx-i2cmux-2 {
+						marvell,pins = "twsi";
+						marvell,function = "twsi-opt3";
+					};
+				};
+
+				core_clk: core-clocks@214 {
+					compatible = "marvell,dove-core-clock";
+					reg = <0x0214 0x4>;
+					#clock-cells = <1>;
+				};
+
+				gpio0: gpio-ctrl@400 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0400 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <12>, <13>, <14>, <60>;
+				};
+
+				gpio1: gpio-ctrl@420 {
+					compatible = "marvell,orion-gpio";
+					#gpio-cells = <2>;
+					gpio-controller;
+					reg = <0x0420 0x20>;
+					ngpios = <32>;
+					interrupt-controller;
+					#interrupt-cells = <2>;
+					interrupt-parent = <&intc>;
+					interrupts = <61>;
+				};
+
+				rtc: real-time-clock@8500 {
+					compatible = "marvell,orion-rtc";
+					reg = <0x8500 0x20>;
+					interrupts = <5>;
+				};
 			};
 
 			gconf: global-config@e802c {
@@ -735,6 +797,24 @@
 				interrupts = <47>;
 				status = "disabled";
 			};
+
+			crypto_sram: sram@ffffe000 {
+				compatible = "mmio-sram";
+				reg = <0xffffe000 0x800>;
+				clocks = <&gate_clk 15>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+			};
+
+			gpu: gpu@840000 {
+				clocks = <&divider_clk 1>;
+				clock-names = "core";
+				compatible = "vivante,gc";
+				interrupts = <48>;
+				power-domains = <&gpu_domain>;
+				reg = <0x840000 0x4000>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/dra62x-clocks.dtsi b/arch/arm/boot/dts/dra62x-clocks.dtsi
new file mode 100644
index 000000000000..11d1241b0e13
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-clocks.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "dm814x-clocks.dtsi"
+
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+	status = "disabled";
+};
+
+&adpll_l3_ck {
+	status = "disabled";
+};
+
+&adpll_dss_ck {
+	status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+/*
+ * Compared to dm814x, dra62x has different shifts and more mux options.
+ * Please add the extra options for ysclk_14 and 16 if really needed.
+ */
+&timer1_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <4>;
+};
+
+&timer2_fck {
+	clocks = <&sysclk18_ck &aud_clkin0_ck &aud_clkin1_ck
+		  &aud_clkin2_ck &devosc_ck &auxosc_ck &tclkin_ck>;
+	ti,bit-shift = <8>;
+};
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
new file mode 100644
index 000000000000..577114c4c20a
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "dra62x.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "DRA62x J5 Eco EVM";
+	compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;	/* 1 GB */
+	};
+
+	/* MIC94060YC6 controlled by SD1_POW pin */
+	vmmcsd_fixed: fixedregulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&cpsw_emac0 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+};
+
+&cpsw_emac1 {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+};
+
+&davinci_mdio {
+	ethphy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+
+	ethphy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&gpmc {
+	ranges = <0 0 0x04000000 0x01000000>;	/* CS0: 16MB for NAND */
+
+	nand@0,0 {
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		linux,mtd-name = "micron,mt29f2g16aadwp";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ti,nand-ecc-opt = "bch8";
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <44>;
+		gpmc,cs-wr-off-ns = <44>;
+		gpmc,adv-on-ns = <6>;
+		gpmc,adv-rd-off-ns = <34>;
+		gpmc,adv-wr-off-ns = <44>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <40>;
+		gpmc,oe-on-ns = <0>;
+		gpmc,oe-off-ns = <54>;
+		gpmc,access-ns = <64>;
+		gpmc,rd-cycle-ns = <82>;
+		gpmc,wr-cycle-ns = <82>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		partition@0 {
+			label = "X-Loader";
+			reg = <0 0x80000>;
+		};
+		partition@80000 {
+			label = "U-Boot";
+			reg = <0x80000 0x1c0000>;
+		};
+		partition@1c0000 {
+			label = "Environment";
+			reg = <0x240000 0x40000>;
+		};
+		partition@280000 {
+			label = "Kernel";
+			reg = <0x280000 0x500000>;
+		};
+		partition@780000 {
+			label = "Filesystem";
+			reg = <0x780000 0xf880000>;
+		};
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_pins>;
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+};
+
+&pincntl {
+	sd1_pins: pinmux_sd1_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0800, PIN_INPUT | 0x1)	/* SD1_CLK */
+			DM814X_IOPAD(0x0804, PIN_INPUT_PULLUP |  0x1)	/* SD1_CMD */
+			DM814X_IOPAD(0x0808, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[0] */
+			DM814X_IOPAD(0x080c, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[1] */
+			DM814X_IOPAD(0x0810, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[2] */
+			DM814X_IOPAD(0x0814, PIN_INPUT_PULLUP |  0x1)	/* SD1_DAT[3] */
+			DM814X_IOPAD(0x0924, PIN_OUTPUT |  0x40)	/* SD1_POW */
+			DM814X_IOPAD(0x093C, PIN_INPUT_PULLUP |  0x80)	/* GP1[6] */
+			>;
+	};
+
+	usb0_pins: pinmux_usb0_pins {
+		pinctrl-single,pins = <
+			DM814X_IOPAD(0x0c34, PIN_OUTPUT | 0x1)	/* USB0_DRVVBUS */
+			>;
+	};
+};
+
+/* USB0_ID pin state: SW10[1] = 0 cable detection, SW10[1] = 1 ID grounded */
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	dr_mode = "otg";
+};
+
+&usb1_phy {
+	status = "disabled";
+};
+
+&usb1 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra62x.dtsi b/arch/arm/boot/dts/dra62x.dtsi
new file mode 100644
index 000000000000..cfefa670515c
--- /dev/null
+++ b/arch/arm/boot/dts/dra62x.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include "dm814x.dtsi"
+
+/ {
+	compatible = "ti,dra62x";
+};
+
+/* Compared to dm814x, dra62x has different offsets for Ethernet */
+&mac {
+	reg = <0 0x800>,
+	      <0x1200 0x100>;
+};
+
+&davinci_mdio {
+	reg = <0x1000 0x100>;
+};
+
+#include "dra62x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
new file mode 100644
index 000000000000..747ff0db90c7
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-dspeve-thermal.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for DRA7x SoC DSPEVE thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+dspeve_thermal: dspeve_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     3>;
+
+	trips {
+		dspeve_crit: dspeve_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
new file mode 100644
index 000000000000..4cdffd6db740
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -0,0 +1,265 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",	"HPLOUT",
+			"Headphone Jack",	"HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",		"Line In",
+			"LINE1R",		"Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led0 {
+			label = "dra7:usr1";
+			gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led1 {
+			label = "dra7:usr2";
+			gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "dra7:usr3";
+			gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "dra7:usr4";
+			gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		USER1 {
+			label = "btnUser1";
+			linux,code = <BTN_0>;
+			gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>;
+		};
+
+		USER2 {
+			label = "btnUser2";
+			linux,code = <BTN_1>;
+			gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&mcspi1 {
+	status = "okay";
+};
+
+&mcspi2 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	flash@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x00010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	extcon = <&extcon_usb2>;
+};
+
+&atl {
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&pcie1_rc {
+	status = "okay";
+};
+
+&mmc4 {
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wifi@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index aa465904f6cc..8cbcf55a5a33 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -1,290 +1,181 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  */
 /dts-v1/;
 
 #include "dra74x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
+#include "dra7-evm-common.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
 
 / {
 	model = "TI DRA742";
 	compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x80000000 0x60000000>; /* 1536 MB */
+		reg = <0x0 0x80000000 0x0 0x60000000>; /* 1536 MB */
 	};
 
-	mmc2_3v3: fixedregulator-mmc2 {
+	evm_12v0: fixedregulator-evm_12v0 {
+		/* main supply */
 		compatible = "regulator-fixed";
-		regulator-name = "mmc2_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
-	};
-
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	vtt_fixed: fixedregulator-vtt {
-		compatible = "regulator-fixed";
-		regulator-name = "vtt_fixed";
-		regulator-min-microvolt = <1350000>;
-		regulator-max-microvolt = <1350000>;
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
 		regulator-always-on;
 		regulator-boot-on;
-		enable-active-high;
-		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};
-};
-
-&dra7_pmx_core {
-	pinctrl-names = "default";
-	pinctrl-0 = <&vtt_pin>;
 
-	vtt_pin: pinmux_vtt_pin {
-		pinctrl-single,pins = <
-			0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
-		>;
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		vin-supply = <&smps9_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
-		>;
-	};
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-	i2c2_pins: pinmux_i2c2_pins {
-		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
-			0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
-		>;
-	};
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
 
-	i2c3_pins: pinmux_i2c3_pins {
-		pinctrl-single,pins = <
-			0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
-			0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
-		>;
-	};
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
 
-	mcspi1_pins: pinmux_mcspi1_pins {
-		pinctrl-single,pins = <
-			0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
-			0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
-			0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
-			0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
-			0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
-			0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
-		>;
-	};
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
 
-	mcspi2_pins: pinmux_mcspi2_pins {
-		pinctrl-single,pins = <
-			0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
-			0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
-			0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
-		>;
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
 	};
 
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
-			0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
-			0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
-			0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
-		>;
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
 	};
 
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
-			0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
-			0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
-			0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
-		>;
+	evm_3v3_sw: fixedregulator-evm_3v3_sw {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sw";
+		vin-supply = <&sysen1>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
 	};
 
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
-			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
-		>;
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
 	};
 
-	qspi1_pins: pinmux_qspi1_pins {
-		pinctrl-single,pins = <
-			0x4c (PIN_INPUT | MUX_MODE1)  /* gpmc_a3.qspi1_cs2 */
-			0x50 (PIN_INPUT | MUX_MODE1)  /* gpmc_a4.qspi1_cs3 */
-			0x74 (PIN_INPUT | MUX_MODE1)  /* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)  /* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)  /* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)  /* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_INPUT | MUX_MODE1)  /* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs2.qspi1_cs0 */
-			0xbc (PIN_INPUT_PULLUP | MUX_MODE1)  /* gpmc_cs3.qspi1_cs1 */
-		>;
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of Cntlr A of TPS43351-Q1 on dra7-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
-	usb1_pins: pinmux_usb1_pins {
-                pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-                >;
-        };
-
-	usb2_pins: pinmux_usb2_pins {
-                pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-                >;
-        };
-
-	nand_flash_x16: nand_flash_x16 {
-		/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
-		 * So NAND flash requires following switch settings:
-		 * SW5.9 (GPMC_WPN) = LOW
-		 * SW5.1 (NAND_BOOTn) = HIGH */
-		pinctrl-single,pins = <
-			0x0 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0	*/
-			0x4 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1	*/
-			0x8 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2	*/
-			0xc 	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3	*/
-			0x10	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4	*/
-			0x14	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5	*/
-			0x18	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6	*/
-			0x1c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7	*/
-			0x20	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad8	*/
-			0x24	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad9	*/
-			0x28	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad10	*/
-			0x2c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad11	*/
-			0x30	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad12	*/
-			0x34	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad13	*/
-			0x38	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad14	*/
-			0x3c	(PIN_INPUT  | MUX_MODE0)	/* gpmc_ad15	*/
-			0xd8	(PIN_INPUT_PULLUP  | MUX_MODE0)	/* gpmc_wait0	*/
-			0xcc	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_wen	*/
-			0xb4	(PIN_OUTPUT_PULLUP | MUX_MODE0)	/* gpmc_csn0	*/
-			0xc4	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_advn_ale */
-			0xc8	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_oen_ren	 */
-			0xd0	(PIN_OUTPUT | MUX_MODE0)	/* gpmc_be0n_cle */
-		>;
+	evm_5v0: fixedregulator-evm_5v0 {
+		/* Output of Cntlr B of TPS43351-Q1 on dra7-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x250 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txc.rgmii0_txc */
-			0x254 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txctl.rgmii0_txctl */
-			0x258 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_td3.rgmii0_txd3 */
-			0x25c (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd2.rgmii0_txd2 */
-			0x260 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd1.rgmii0_txd1 */
-			0x264 (PIN_OUTPUT | MUX_MODE0)	/* rgmii0_txd0.rgmii0_txd0 */
-			0x268 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxc.rgmii0_rxc */
-			0x26c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxctl.rgmii0_rxctl */
-			0x270 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd3.rgmii0_rxd3 */
-			0x274 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd2.rgmii0_rxd2 */
-			0x278 (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd1.rgmii0_rxd1 */
-			0x27c (PIN_INPUT | MUX_MODE0)	/* rgmii0_rxd0.rgmii0_rxd0 */
-
-			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
-		>;
-
+	evm_3v6: fixedregulator-evm_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&evm_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x250 (MUX_MODE15)
-			0x254 (MUX_MODE15)
-			0x258 (MUX_MODE15)
-			0x25c (MUX_MODE15)
-			0x260 (MUX_MODE15)
-			0x264 (MUX_MODE15)
-			0x268 (MUX_MODE15)
-			0x26c (MUX_MODE15)
-			0x270 (MUX_MODE15)
-			0x274 (MUX_MODE15)
-			0x278 (MUX_MODE15)
-			0x27c (MUX_MODE15)
-
-			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
-		>;
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 0>;
+		startup-delay-us = <70000>;
+		enable-active-high;
 	};
 
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
-		>;
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&sysen2>;
+		gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
 	};
 
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
-		>;
-	};
+};
 
+&dra7_pmx_core {
 	dcan1_pins_default: dcan1_pins_default {
 		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
 		>;
 	};
 
 	dcan1_pins_sleep: dcan1_pins_sleep {
 		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
 		>;
 	};
 };
 
 &i2c1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <400000>;
 
 	tps659038: tps659038@58 {
 		compatible = "ti,tps659038";
 		reg = <0x58>;
+		ti,palmas-override-powerhold;
+		ti,system-power-controller;
 
 		tps659038_pmic {
 			compatible = "ti,tps659038-pmic";
@@ -303,7 +194,7 @@
 					/* VDD_DSPEVE */
 					regulator-name = "smps45";
 					regulator-min-microvolt = < 850000>;
-					regulator-max-microvolt = <1150000>;
+					regulator-max-microvolt = <1250000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
@@ -321,7 +212,7 @@
 					/* CORE_VDD */
 					regulator-name = "smps7";
 					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1060000>;
+					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 					regulator-boot-on;
 				};
@@ -349,6 +240,7 @@
 					regulator-name = "ldo1";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
 					regulator-boot-on;
 				};
 
@@ -378,6 +270,7 @@
 					regulator-max-microvolt = <1050000>;
 					regulator-always-on;
 					regulator-boot-on;
+					regulator-allow-bypass;
 				};
 
 				ldoln_reg: ldoln {
@@ -396,12 +289,48 @@
 					regulator-max-microvolt = <3300000>;
 					regulator-boot-on;
 				};
+
+				/* REGEN1 is unused */
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resources */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				/* REGEN3 is unused */
+
+				sysen1: sysen1 {
+					/* PMIC_REGEN_3V3 */
+					regulator-name = "sysen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				sysen2: sysen2 {
+					/* PMIC_REGEN_DDR */
+					regulator-name = "sysen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
 			};
 		};
 	};
 
+	pcf_lcd: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575";
+		compatible = "nxp,pcf8575";
 		reg = <0x21>;
 		lines-initial-states = <0x1408>;
 		gpio-controller;
@@ -412,153 +341,95 @@
 		#interrupt-cells = <2>;
 	};
 
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
 };
 
 &i2c2 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins>;
-	clock-frequency = <400000>;
-};
-
-&i2c3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c3_pins>;
 	clock-frequency = <400000>;
-};
-
-&mcspi1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi1_pins>;
-};
-
-&mcspi2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&mcspi2_pins>;
-};
-
-&uart1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-			      <&dra7_pmx_core 0x3e0>;
-};
 
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-};
-
-&uart3 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
+	pcf_hdmi: gpio@26 {
+		compatible = "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		hdmi-audio-hog {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
 };
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&ldo1_reg>;
+	vmmc-supply = <&evm_3v3_sd>;
+	vqmmc-supply = <&ldo1_reg>;
 	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50-rev11", "sdr104-rev11", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
+	pinctrl-7 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev20_conf>;
+	pinctrl-8 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
 };
 
 &mmc2 {
 	status = "okay";
-	vmmc-supply = <&mmc2_3v3>;
+	vmmc-supply = <&evm_1v8_sw>;
+	vqmmc-supply = <&evm_1v8_sw>;
 	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_1_8v_rev11 &mmc2_iodelay_ddr_1_8v_rev11_conf>;
+	pinctrl-3 = <&mmc2_pins_ddr_rev20>;
+	pinctrl-4 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev11_conf>;
+	pinctrl-5 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
 };
 
-&cpu0 {
-	cpu0-supply = <&smps123_reg>;
-};
-
-&qspi {
+&mmc4 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
+	vmmc-supply = <&evm_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	pinctrl-names = "default-rev11", "default", "hs-rev11", "hs", "sdr12-rev11", "sdr12", "sdr25-rev11", "sdr25";
+	pinctrl-0 = <&mmc4_pins_default &mmc4_iodelay_ds_rev11_conf>;
+	pinctrl-1 = <&mmc4_pins_default &mmc4_iodelay_ds_rev20_conf>;
+	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+	pinctrl-4 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+	pinctrl-5 = <&mmc4_pins_sdr12 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
+	pinctrl-6 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev11_conf>;
+	pinctrl-7 = <&mmc4_pins_sdr25 &mmc4_iodelay_sdr12_hs_sdr25_rev20_conf>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
-};
-
-&usb1 {
-	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
-};
-
-&usb2 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
+&cpu0 {
+	vdd-supply = <&smps123_reg>;
 };
 
 &elm {
@@ -566,12 +437,21 @@
 };
 
 &gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_flash_x16>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	/*
+	* For the existing IOdelay configuration via U-Boot we don't
+	* support NAND on dra7-evm. Keep it disabled. Enabling it
+	* requires a different configuration by U-Boot.
+	*/
+	status = "disabled";
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
 	nand@0,0 {
+		compatible = "ti,omap2-nand";
 		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>; /* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
 		ti,nand-ecc-opt = "bch8";
 		ti,elm-id = <&elm>;
 		nand-bus-width = <16>;
@@ -594,7 +474,6 @@
 		gpmc,bus-turnaround-ns = <0>;
 		gpmc,cycle2cycle-delay-ns = <0>;
 		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
 		gpmc,wr-data-mux-bus-ns = <0>;
 		/* MTD partition table */
 		/* All SPL-* partitions are sized to minimal length
@@ -604,7 +483,7 @@
 		#size-cells = <1>;
 		partition@0 {
 			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
+			reg = <0x00000000 0x00020000>;
 		};
 		partition@1 {
 			label = "NAND.SPL.backup1";
@@ -653,40 +532,61 @@
 	phy-supply = <&ldousb_reg>;
 };
 
-&gpio7 {
+&gpio7_target {
 	ti,no-reset-on-init;
 	ti,no-idle-on-init;
 };
 
-&mac {
+&mac_sw {
 	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	dual_emac;
 };
 
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <2>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
 	phy-mode = "rgmii";
-	dual_emac_res_vlan = <1>;
+	ti,dual-emac-pvid = <1>;
 };
 
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
+&cpsw_port2 {
+	phy-handle = <&ethphy1>;
 	phy-mode = "rgmii";
-	dual_emac_res_vlan = <2>;
+	ti,dual-emac-pvid = <2>;
 };
 
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
+&davinci_mdio_sw {
+	ethphy0: ethernet-phy@2 {
+		reg = <2>;
+	};
+
+	ethphy1: ethernet-phy@3 {
+		reg = <3>;
+	};
 };
 
 &dcan1 {
-	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
 	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
 };
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
new file mode 100644
index 000000000000..a5bdc6431d8d
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA7xx/AM57xx platforms
+ */
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		status = "okay";
+	};
+};
+
+&ipu2 {
+	mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
+	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer4>, <&timer9>;
+};
+
+&ipu1 {
+	mboxes = <&mailbox5 &mbox_ipu1_ipc3x>;
+	ti,timers = <&timer11>;
+	ti,watchdog-timers = <&timer7>, <&timer8>;
+};
+
+&dsp1 {
+	mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
+	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer10>;
+};
diff --git a/arch/arm/boot/dts/dra7-iva-thermal.dtsi b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
new file mode 100644
index 000000000000..0a31313065df
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-iva-thermal.dtsi
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Device Tree Source for DRA7x SoC IVA thermal
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+iva_thermal: iva_thermal {
+	polling-delay-passive = <250>; /* milliseconds */
+	polling-delay = <500>; /* milliseconds */
+
+			/* sensor       ID */
+	thermal-sensors = <&bandgap     4>;
+
+	trips {
+		iva_crit: iva_crit {
+			temperature = <125000>; /* milliCelsius */
+			hysteresis = <2000>; /* milliCelsius */
+			type = "critical";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
new file mode 100644
index 000000000000..5733e3a4ea8e
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -0,0 +1,4606 @@
+&l4_cfg {						/* 0x4a000000 */
+	compatible = "ti,dra7-l4-cfg", "simple-pm-bus";
+	power-domains = <&prm_coreaon>;
+	clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x4a000000 0x800>,
+	      <0x4a000800 0x800>,
+	      <0x4a001000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4a000000 0x100000>,	/* segment 0 */
+		 <0x00100000 0x4a100000 0x100000>,	/* segment 1 */
+		 <0x00200000 0x4a200000 0x100000>;	/* segment 2 */
+
+	segment@0 {					/* 0x4a000000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 2 */
+			 <0x00002000 0x00002000 0x002000>,	/* ap 3 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 4 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 5 */
+			 <0x00006000 0x00006000 0x001000>,	/* ap 6 */
+			 <0x00008000 0x00008000 0x002000>,	/* ap 7 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 8 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 9 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 10 */
+			 <0x0005e000 0x0005e000 0x002000>,	/* ap 11 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 12 */
+			 <0x00080000 0x00080000 0x008000>,	/* ap 13 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 14 */
+			 <0x000a0000 0x000a0000 0x008000>,	/* ap 15 */
+			 <0x000a8000 0x000a8000 0x001000>,	/* ap 16 */
+			 <0x000d9000 0x000d9000 0x001000>,	/* ap 17 */
+			 <0x000da000 0x000da000 0x001000>,	/* ap 18 */
+			 <0x000dd000 0x000dd000 0x001000>,	/* ap 19 */
+			 <0x000de000 0x000de000 0x001000>,	/* ap 20 */
+			 <0x000e0000 0x000e0000 0x001000>,	/* ap 21 */
+			 <0x000e1000 0x000e1000 0x001000>,	/* ap 22 */
+			 <0x000f4000 0x000f4000 0x001000>,	/* ap 23 */
+			 <0x000f5000 0x000f5000 0x001000>,	/* ap 24 */
+			 <0x000f6000 0x000f6000 0x001000>,	/* ap 25 */
+			 <0x000f7000 0x000f7000 0x001000>,	/* ap 26 */
+			 <0x00090000 0x00090000 0x008000>,	/* ap 59 */
+			 <0x00098000 0x00098000 0x001000>;	/* ap 60 */
+
+		target-module@2000 {			/* 0x4a002000, ap 3 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x2000>;
+
+			scm: scm@0 {
+				compatible = "ti,dra7-scm-core", "simple-bus";
+				reg = <0 0x2000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x2000>;
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon", "simple-bus";
+					reg = <0x0 0x1400>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x0 0x1400>;
+
+					pbias_regulator: pbias_regulator@e00 {
+						compatible = "ti,pbias-dra7", "ti,pbias-omap";
+						reg = <0xe00 0x4>;
+						syscon = <&scm_conf>;
+						pbias_mmc_reg: pbias_mmc_omap5 {
+							regulator-name = "pbias_mmc_omap5";
+							regulator-min-microvolt = <1800000>;
+							regulator-max-microvolt = <3300000>;
+						};
+					};
+
+					phy_gmii_sel: phy-gmii-sel {
+						compatible = "ti,dra7xx-phy-gmii-sel";
+						reg = <0x554 0x4>;
+						#phy-cells = <1>;
+					};
+
+					scm_conf_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				dra7_pmx_core: pinmux@1400 {
+					compatible = "ti,dra7-padconf",
+						     "pinctrl-single";
+					reg = <0x1400 0x0468>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#pinctrl-cells = <1>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0x3fffffff>;
+				};
+
+				scm_conf1: scm_conf@1c04 {
+					compatible = "syscon";
+					reg = <0x1c04 0x0020>;
+					#syscon-cells = <2>;
+				};
+
+				scm_conf_pcie: scm_conf@1c24 {
+					compatible = "syscon";
+					reg = <0x1c24 0x0024>;
+				};
+
+				sdma_xbar: dma-router@b78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xb78 0xfc>;
+					#dma-cells = <1>;
+					dma-requests = <205>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&sdma>;
+				};
+
+				edma_xbar: dma-router@c78 {
+					compatible = "ti,dra7-dma-crossbar";
+					reg = <0xc78 0x7c>;
+					#dma-cells = <2>;
+					dma-requests = <204>;
+					ti,dma-safe-map = <0>;
+					dma-masters = <&edma>;
+				};
+			};
+		};
+
+		target-module@5000 {			/* 0x4a005000, ap 5 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+
+			cm_core_aon: cm_core_aon@0 {
+				compatible = "ti,dra7-cm-core-aon",
+					      "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0 0x2000>;
+				ranges = <0 0 0x2000>;
+
+				cm_core_aon_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_aon_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@8000 {			/* 0x4a008000, ap 7 0e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x8000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x2000>;
+
+			cm_core: cm_core@0 {
+				compatible = "ti,dra7-cm-core", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0 0x3000>;
+				ranges = <0 0 0x3000>;
+
+				cm_core_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				cm_core_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@56000 {			/* 0x4a056000, ap 9 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x56000 0x4>,
+			      <0x5602c 0x4>,
+			      <0x56028 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): core_pwrdm, dma_clkdm */
+			clocks = <&dma_clkctrl DRA7_DMA_DMA_SYSTEM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+
+			sdma: dma-controller@0 {
+				compatible = "ti,omap4430-sdma", "ti,omap-sdma";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				#dma-cells = <1>;
+				dma-channels = <32>;
+				dma-requests = <127>;
+			};
+		};
+
+		target-module@5e000 {			/* 0x4a05e000, ap 11 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x2000>;
+		};
+
+		target-module@80000 {			/* 0x4a080000, ap 13 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>,
+			      <0x80014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x8000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+				reg = <0x0 0x20>;
+
+				usb2_phy1: phy@4000 {
+					compatible = "ti,dra7x-usb2", "ti,omap-usb2";
+					reg = <0x4000 0x400>;
+					syscon-phy-power = <&scm_conf 0x300>;
+					clocks = <&usb_phy1_always_on_clk32k>,
+						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
+					clock-names =	"wkupclk",
+							"refclk";
+					#phy-cells = <0>;
+				};
+
+				usb2_phy2: phy@5000 {
+					compatible = "ti,dra7x-usb2-phy2",
+						     "ti,omap-usb2";
+					reg = <0x5000 0x400>;
+					syscon-phy-power = <&scm_conf 0xe74>;
+					clocks = <&usb_phy2_always_on_clk32k>,
+						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
+					clock-names =	"wkupclk",
+							"refclk";
+					#phy-cells = <0>;
+				};
+
+				usb3_phy1: phy@4400 {
+					compatible = "ti,omap-usb3";
+					reg = <0x4400 0x80>,
+					      <0x4800 0x64>,
+					      <0x4c00 0x40>;
+					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+					syscon-phy-power = <&scm_conf 0x370>;
+					clocks = <&usb_phy3_always_on_clk32k>,
+						 <&sys_clkin1>,
+						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
+					clock-names =	"wkupclk",
+							"sysclk",
+							"refclk";
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		target-module@90000 {			/* 0x4a090000, ap 59 42.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x90000 0x4>,
+			      <0x90010 0x4>,
+			      <0x90014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_OCP2SCP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x8000>;
+
+			ocp2scp@0 {
+				compatible = "ti,omap-ocp2scp";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x8000>;
+				reg = <0x0 0x20>;
+
+				pcie1_phy: pciephy@4000 {
+					compatible = "ti,phy-pipe3-pcie";
+					reg = <0x4000 0x80>, /* phy_rx */
+					      <0x4400 0x64>; /* phy_tx */
+					reg-names = "phy_rx", "phy_tx";
+					syscon-phy-power = <&scm_conf_pcie 0x1c>;
+					syscon-pcs = <&scm_conf_pcie 0x10>;
+					clocks = <&dpll_pcie_ref_ck>,
+						 <&dpll_pcie_ref_m2ldo_ck>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 8>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>,
+						 <&optfclk_pciephy_div>,
+						 <&sys_clkin1>;
+					clock-names = "dpll_ref", "dpll_ref_m2",
+						      "wkupclk", "refclk",
+						      "div-clk", "phy-div", "sysclk";
+					#phy-cells = <0>;
+				};
+
+				pcie2_phy: pciephy@5000 {
+					compatible = "ti,phy-pipe3-pcie";
+					reg = <0x5000 0x80>, /* phy_rx */
+					      <0x5400 0x64>; /* phy_tx */
+					reg-names = "phy_rx", "phy_tx";
+					syscon-phy-power = <&scm_conf_pcie 0x20>;
+					syscon-pcs = <&scm_conf_pcie 0x10>;
+					clocks = <&dpll_pcie_ref_ck>,
+						 <&dpll_pcie_ref_m2ldo_ck>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 8>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+						 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>,
+						 <&optfclk_pciephy_div>,
+						 <&sys_clkin1>;
+					clock-names = "dpll_ref", "dpll_ref_m2",
+						      "wkupclk", "refclk",
+						      "div-clk", "phy-div", "sysclk";
+					#phy-cells = <0>;
+					status = "disabled";
+				};
+
+				sata_phy: phy@6000 {
+					compatible = "ti,phy-pipe3-sata";
+					reg = <0x6000 0x80>, /* phy_rx */
+					      <0x6400 0x64>, /* phy_tx */
+					      <0x6800 0x40>; /* pll_ctrl */
+					reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+					syscon-phy-power = <&scm_conf 0x374>;
+					clocks = <&sys_clkin1>,
+						 <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+					clock-names = "sysclk", "refclk";
+					syscon-pllreset = <&scm_conf 0x3fc>;
+					#phy-cells = <0>;
+				};
+			};
+		};
+
+		target-module@a0000 {			/* 0x4a0a0000, ap 15 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa0000 0x8000>;
+		};
+
+		target-module@d9000 {			/* 0x4a0d9000, ap 17 72.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0xd9038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
+			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_MPU_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd9000 0x1000>;
+
+			/* SmartReflex child device marked reserved in TRM */
+		};
+
+		target-module@dd000 {			/* 0x4a0dd000, ap 19 18.0 */
+			compatible = "ti,sysc-omap4-sr", "ti,sysc";
+			reg = <0xdd038 0x4>;
+			reg-names = "sysc";
+			ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): coreaon_pwrdm, coreaon_clkdm */
+			clocks = <&coreaon_clkctrl DRA7_COREAON_SMARTREFLEX_CORE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xdd000 0x1000>;
+
+			/* SmartReflex child device marked reserved in TRM */
+		};
+
+		target-module@e0000 {			/* 0x4a0e0000, ap 21 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe0000 0x1000>;
+		};
+
+		target-module@f4000 {			/* 0x4a0f4000, ap 23 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xf4000 0x4>,
+			      <0xf4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf4000 0x1000>;
+
+			mailbox1: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <3>;
+				ti,mbox-num-fifos = <8>;
+				status = "disabled";
+			};
+		};
+
+		target-module@f6000 {			/* 0x4a0f6000, ap 25 78.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xf6000 0x4>,
+			      <0xf6010 0x4>,
+			      <0xf6014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_SPINLOCK_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf6000 0x1000>;
+
+			hwspinlock: spinlock@0 {
+				compatible = "ti,omap4-hwspinlock";
+				reg = <0x0 0x1000>;
+				#hwlock-cells = <1>;
+			};
+		};
+	};
+
+	segment@100000 {					/* 0x4a100000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00002000 0x00102000 0x001000>,	/* ap 27 */
+			 <0x00003000 0x00103000 0x001000>,	/* ap 28 */
+			 <0x00008000 0x00108000 0x001000>,	/* ap 29 */
+			 <0x00009000 0x00109000 0x001000>,	/* ap 30 */
+			 <0x00040000 0x00140000 0x010000>,	/* ap 31 */
+			 <0x00050000 0x00150000 0x001000>,	/* ap 32 */
+			 <0x00051000 0x00151000 0x001000>,	/* ap 33 */
+			 <0x00052000 0x00152000 0x001000>,	/* ap 34 */
+			 <0x00053000 0x00153000 0x001000>,	/* ap 35 */
+			 <0x00054000 0x00154000 0x001000>,	/* ap 36 */
+			 <0x00055000 0x00155000 0x001000>,	/* ap 37 */
+			 <0x00056000 0x00156000 0x001000>,	/* ap 38 */
+			 <0x00057000 0x00157000 0x001000>,	/* ap 39 */
+			 <0x00058000 0x00158000 0x001000>,	/* ap 40 */
+			 <0x0005b000 0x0015b000 0x001000>,	/* ap 41 */
+			 <0x0005c000 0x0015c000 0x001000>,	/* ap 42 */
+			 <0x0005d000 0x0015d000 0x001000>,	/* ap 45 */
+			 <0x0005e000 0x0015e000 0x001000>,	/* ap 46 */
+			 <0x0005f000 0x0015f000 0x001000>,	/* ap 47 */
+			 <0x00060000 0x00160000 0x001000>,	/* ap 48 */
+			 <0x00061000 0x00161000 0x001000>,	/* ap 49 */
+			 <0x00062000 0x00162000 0x001000>,	/* ap 50 */
+			 <0x00063000 0x00163000 0x001000>,	/* ap 51 */
+			 <0x00064000 0x00164000 0x001000>,	/* ap 52 */
+			 <0x00065000 0x00165000 0x001000>,	/* ap 53 */
+			 <0x00066000 0x00166000 0x001000>,	/* ap 54 */
+			 <0x00067000 0x00167000 0x001000>,	/* ap 55 */
+			 <0x00068000 0x00168000 0x001000>,	/* ap 56 */
+			 <0x0006d000 0x0016d000 0x001000>,	/* ap 57 */
+			 <0x0006e000 0x0016e000 0x001000>,	/* ap 58 */
+			 <0x00071000 0x00171000 0x001000>,	/* ap 61 */
+			 <0x00072000 0x00172000 0x001000>,	/* ap 62 */
+			 <0x00073000 0x00173000 0x001000>,	/* ap 63 */
+			 <0x00074000 0x00174000 0x001000>,	/* ap 64 */
+			 <0x00075000 0x00175000 0x001000>,	/* ap 65 */
+			 <0x00076000 0x00176000 0x001000>,	/* ap 66 */
+			 <0x00077000 0x00177000 0x001000>,	/* ap 67 */
+			 <0x00078000 0x00178000 0x001000>,	/* ap 68 */
+			 <0x00081000 0x00181000 0x001000>,	/* ap 69 */
+			 <0x00082000 0x00182000 0x001000>,	/* ap 70 */
+			 <0x00083000 0x00183000 0x001000>,	/* ap 71 */
+			 <0x00084000 0x00184000 0x001000>,	/* ap 72 */
+			 <0x00085000 0x00185000 0x001000>,	/* ap 73 */
+			 <0x00086000 0x00186000 0x001000>,	/* ap 74 */
+			 <0x00087000 0x00187000 0x001000>,	/* ap 75 */
+			 <0x00088000 0x00188000 0x001000>,	/* ap 76 */
+			 <0x00069000 0x00169000 0x001000>,	/* ap 103 */
+			 <0x0006a000 0x0016a000 0x001000>,	/* ap 104 */
+			 <0x00079000 0x00179000 0x001000>,	/* ap 105 */
+			 <0x0007a000 0x0017a000 0x001000>,	/* ap 106 */
+			 <0x0006b000 0x0016b000 0x001000>,	/* ap 107 */
+			 <0x0006c000 0x0016c000 0x001000>,	/* ap 108 */
+			 <0x0007b000 0x0017b000 0x001000>,	/* ap 121 */
+			 <0x0007c000 0x0017c000 0x001000>,	/* ap 122 */
+			 <0x0007d000 0x0017d000 0x001000>,	/* ap 123 */
+			 <0x0007e000 0x0017e000 0x001000>,	/* ap 124 */
+			 <0x00059000 0x00159000 0x001000>,	/* ap 125 */
+			 <0x0005a000 0x0015a000 0x001000>;	/* ap 126 */
+
+		target-module@2000 {			/* 0x4a102000, ap 27 3c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@8000 {			/* 0x4a108000, ap 29 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+		};
+
+		target-module@40000 {			/* 0x4a140000, ap 31 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x400fc 4>,
+			      <0x41100 4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			power-domains = <&prm_l3init>;
+			clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>;
+			clock-names = "fck";
+			#size-cells = <1>;
+			#address-cells = <1>;
+			ranges = <0x0 0x40000 0x10000>;
+
+			sata: sata@0 {
+				compatible = "snps,dwc-ahci";
+				reg = <0 0x1100>, <0x1100 0x8>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&sata_phy>;
+				phy-names = "sata-phy";
+				clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+				ports-implemented = <0x1>;
+			};
+		};
+
+		target-module@51000 {			/* 0x4a151000, ap 33 50.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x51000 0x1000>;
+		};
+
+		target-module@53000 {			/* 0x4a153000, ap 35 54.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53000 0x1000>;
+		};
+
+		target-module@55000 {			/* 0x4a155000, ap 37 46.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+		};
+
+		target-module@57000 {			/* 0x4a157000, ap 39 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+		};
+
+		target-module@59000 {			/* 0x4a159000, ap 125 6a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+		};
+
+		target-module@5b000 {			/* 0x4a15b000, ap 41 60.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+		};
+
+		target-module@5d000 {			/* 0x4a15d000, ap 45 3a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+		};
+
+		target-module@5f000 {			/* 0x4a15f000, ap 47 56.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5f000 0x1000>;
+		};
+
+		target-module@61000 {			/* 0x4a161000, ap 49 32.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x61000 0x1000>;
+		};
+
+		target-module@63000 {			/* 0x4a163000, ap 51 5c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x63000 0x1000>;
+		};
+
+		target-module@65000 {			/* 0x4a165000, ap 53 4e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x65000 0x1000>;
+		};
+
+		target-module@67000 {			/* 0x4a167000, ap 55 5e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x67000 0x1000>;
+		};
+
+		target-module@69000 {			/* 0x4a169000, ap 103 4a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x69000 0x1000>;
+		};
+
+		target-module@6b000 {			/* 0x4a16b000, ap 107 52.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6b000 0x1000>;
+		};
+
+		target-module@6d000 {			/* 0x4a16d000, ap 57 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6d000 0x1000>;
+		};
+
+		target-module@71000 {			/* 0x4a171000, ap 61 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x71000 0x1000>;
+		};
+
+		target-module@73000 {			/* 0x4a173000, ap 63 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x73000 0x1000>;
+		};
+
+		target-module@75000 {			/* 0x4a175000, ap 65 64.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x75000 0x1000>;
+		};
+
+		target-module@77000 {			/* 0x4a177000, ap 67 66.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x77000 0x1000>;
+		};
+
+		target-module@79000 {			/* 0x4a179000, ap 105 34.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x79000 0x1000>;
+		};
+
+		target-module@7b000 {			/* 0x4a17b000, ap 121 7c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7b000 0x1000>;
+		};
+
+		target-module@7d000 {			/* 0x4a17d000, ap 123 7e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7d000 0x1000>;
+		};
+
+		target-module@81000 {			/* 0x4a181000, ap 69 26.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x81000 0x1000>;
+		};
+
+		target-module@83000 {			/* 0x4a183000, ap 71 2e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x83000 0x1000>;
+		};
+
+		target-module@85000 {			/* 0x4a185000, ap 73 36.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x85000 0x1000>;
+		};
+
+		target-module@87000 {			/* 0x4a187000, ap 75 74.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x87000 0x1000>;
+		};
+	};
+
+	segment@200000 {					/* 0x4a200000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00018000 0x00218000 0x001000>,	/* ap 43 */
+			 <0x00019000 0x00219000 0x001000>,	/* ap 44 */
+			 <0x00000000 0x00200000 0x001000>,	/* ap 77 */
+			 <0x00001000 0x00201000 0x001000>,	/* ap 78 */
+			 <0x0000a000 0x0020a000 0x001000>,	/* ap 79 */
+			 <0x0000b000 0x0020b000 0x001000>,	/* ap 80 */
+			 <0x0000c000 0x0020c000 0x001000>,	/* ap 81 */
+			 <0x0000d000 0x0020d000 0x001000>,	/* ap 82 */
+			 <0x0000e000 0x0020e000 0x001000>,	/* ap 83 */
+			 <0x0000f000 0x0020f000 0x001000>,	/* ap 84 */
+			 <0x00010000 0x00210000 0x001000>,	/* ap 85 */
+			 <0x00011000 0x00211000 0x001000>,	/* ap 86 */
+			 <0x00012000 0x00212000 0x001000>,	/* ap 87 */
+			 <0x00013000 0x00213000 0x001000>,	/* ap 88 */
+			 <0x00014000 0x00214000 0x001000>,	/* ap 89 */
+			 <0x00015000 0x00215000 0x001000>,	/* ap 90 */
+			 <0x0002a000 0x0022a000 0x001000>,	/* ap 91 */
+			 <0x0002b000 0x0022b000 0x001000>,	/* ap 92 */
+			 <0x0001c000 0x0021c000 0x001000>,	/* ap 93 */
+			 <0x0001d000 0x0021d000 0x001000>,	/* ap 94 */
+			 <0x0001e000 0x0021e000 0x001000>,	/* ap 95 */
+			 <0x0001f000 0x0021f000 0x001000>,	/* ap 96 */
+			 <0x00020000 0x00220000 0x001000>,	/* ap 97 */
+			 <0x00021000 0x00221000 0x001000>,	/* ap 98 */
+			 <0x00024000 0x00224000 0x001000>,	/* ap 99 */
+			 <0x00025000 0x00225000 0x001000>,	/* ap 100 */
+			 <0x00026000 0x00226000 0x001000>,	/* ap 101 */
+			 <0x00027000 0x00227000 0x001000>,	/* ap 102 */
+			 <0x0002c000 0x0022c000 0x001000>,	/* ap 109 */
+			 <0x0002d000 0x0022d000 0x001000>,	/* ap 110 */
+			 <0x0002e000 0x0022e000 0x001000>,	/* ap 111 */
+			 <0x0002f000 0x0022f000 0x001000>,	/* ap 112 */
+			 <0x00030000 0x00230000 0x001000>,	/* ap 113 */
+			 <0x00031000 0x00231000 0x001000>,	/* ap 114 */
+			 <0x00032000 0x00232000 0x001000>,	/* ap 115 */
+			 <0x00033000 0x00233000 0x001000>,	/* ap 116 */
+			 <0x00034000 0x00234000 0x001000>,	/* ap 117 */
+			 <0x00035000 0x00235000 0x001000>,	/* ap 118 */
+			 <0x00036000 0x00236000 0x001000>,	/* ap 119 */
+			 <0x00037000 0x00237000 0x001000>,	/* ap 120 */
+			 <0x0001a000 0x0021a000 0x001000>,	/* ap 127 */
+			 <0x0001b000 0x0021b000 0x001000>;	/* ap 128 */
+
+		target-module@0 {			/* 0x4a200000, ap 77 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4a20a000, ap 79 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4a20c000, ap 81 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+
+		target-module@e000 {			/* 0x4a20e000, ap 83 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xe000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x4a210000, ap 85 14.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@12000 {			/* 0x4a212000, ap 87 16.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000 0x1000>;
+		};
+
+		target-module@14000 {			/* 0x4a214000, ap 89 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x14000 0x1000>;
+		};
+
+		target-module@18000 {			/* 0x4a218000, ap 43 12.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000 0x1000>;
+		};
+
+		target-module@1a000 {			/* 0x4a21a000, ap 127 7a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1a000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4a21c000, ap 93 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4a21e000, ap 95 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x4a220000, ap 97 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+		};
+
+		target-module@24000 {			/* 0x4a224000, ap 99 44.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+		};
+
+		target-module@26000 {			/* 0x4a226000, ap 101 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+		};
+
+		target-module@2a000 {			/* 0x4a22a000, ap 91 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+		};
+
+		target-module@2c000 {			/* 0x4a22c000, ap 109 6c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2c000 0x1000>;
+		};
+
+		target-module@2e000 {			/* 0x4a22e000, ap 111 6e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>;
+		};
+
+		target-module@30000 {			/* 0x4a230000, ap 113 70.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x30000 0x1000>;
+		};
+
+		target-module@32000 {			/* 0x4a232000, ap 115 5a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+		};
+
+		target-module@34000 {			/* 0x4a234000, ap 117 76.1 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+		};
+
+		target-module@36000 {			/* 0x4a236000, ap 119 62.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+	};
+};
+
+&l4_per1 {						/* 0x48000000 */
+	compatible = "ti,dra7-l4-per1", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x48000000 0x800>,
+	      <0x48000800 0x800>,
+	      <0x48001000 0x400>,
+	      <0x48001400 0x400>,
+	      <0x48001800 0x400>,
+	      <0x48001c00 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48000000 0x200000>,	/* segment 0 */
+		 <0x00200000 0x48200000 0x200000>;	/* segment 1 */
+
+	segment@0 {					/* 0x48000000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 3 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 4 */
+			 <0x00032000 0x00032000 0x001000>,	/* ap 5 */
+			 <0x00033000 0x00033000 0x001000>,	/* ap 6 */
+			 <0x00034000 0x00034000 0x001000>,	/* ap 7 */
+			 <0x00035000 0x00035000 0x001000>,	/* ap 8 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 9 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 10 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 11 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 12 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 13 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 14 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 15 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 16 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 17 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 18 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 19 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 20 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 21 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 22 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 23 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 24 */
+			 <0x0006b000 0x0006b000 0x001000>,	/* ap 25 */
+			 <0x0006c000 0x0006c000 0x001000>,	/* ap 26 */
+			 <0x0006d000 0x0006d000 0x001000>,	/* ap 27 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 28 */
+			 <0x0006f000 0x0006f000 0x001000>,	/* ap 29 */
+			 <0x00070000 0x00070000 0x001000>,	/* ap 30 */
+			 <0x00071000 0x00071000 0x001000>,	/* ap 31 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 32 */
+			 <0x00073000 0x00073000 0x001000>,	/* ap 33 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 34 */
+			 <0x00053000 0x00053000 0x001000>,	/* ap 35 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 36 */
+			 <0x000b2000 0x000b2000 0x001000>,	/* ap 37 */
+			 <0x000b3000 0x000b3000 0x001000>,	/* ap 38 */
+			 <0x00078000 0x00078000 0x001000>,	/* ap 39 */
+			 <0x00079000 0x00079000 0x001000>,	/* ap 40 */
+			 <0x00086000 0x00086000 0x001000>,	/* ap 41 */
+			 <0x00087000 0x00087000 0x001000>,	/* ap 42 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 43 */
+			 <0x00089000 0x00089000 0x001000>,	/* ap 44 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 45 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 46 */
+			 <0x00098000 0x00098000 0x001000>,	/* ap 47 */
+			 <0x00099000 0x00099000 0x001000>,	/* ap 48 */
+			 <0x0009a000 0x0009a000 0x001000>,	/* ap 49 */
+			 <0x0009b000 0x0009b000 0x001000>,	/* ap 50 */
+			 <0x0009c000 0x0009c000 0x001000>,	/* ap 51 */
+			 <0x0009d000 0x0009d000 0x001000>,	/* ap 52 */
+			 <0x00068000 0x00068000 0x001000>,	/* ap 53 */
+			 <0x00069000 0x00069000 0x001000>,	/* ap 54 */
+			 <0x00090000 0x00090000 0x002000>,	/* ap 55 */
+			 <0x00092000 0x00092000 0x001000>,	/* ap 56 */
+			 <0x000a4000 0x000a4000 0x001000>,	/* ap 57 */
+			 <0x000a6000 0x000a6000 0x001000>,	/* ap 58 */
+			 <0x000a8000 0x000a8000 0x004000>,	/* ap 59 */
+			 <0x000ac000 0x000ac000 0x001000>,	/* ap 60 */
+			 <0x000ad000 0x000ad000 0x001000>,	/* ap 61 */
+			 <0x000ae000 0x000ae000 0x001000>,	/* ap 62 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 63 */
+			 <0x00067000 0x00067000 0x001000>,	/* ap 64 */
+			 <0x000b4000 0x000b4000 0x001000>,	/* ap 65 */
+			 <0x000b5000 0x000b5000 0x001000>,	/* ap 66 */
+			 <0x000b8000 0x000b8000 0x001000>,	/* ap 67 */
+			 <0x000b9000 0x000b9000 0x001000>,	/* ap 68 */
+			 <0x000ba000 0x000ba000 0x001000>,	/* ap 69 */
+			 <0x000bb000 0x000bb000 0x001000>,	/* ap 70 */
+			 <0x000d1000 0x000d1000 0x001000>,	/* ap 71 */
+			 <0x000d2000 0x000d2000 0x001000>,	/* ap 72 */
+			 <0x000d5000 0x000d5000 0x001000>,	/* ap 73 */
+			 <0x000d6000 0x000d6000 0x001000>,	/* ap 74 */
+			 <0x000a2000 0x000a2000 0x001000>,	/* ap 75 */
+			 <0x000a3000 0x000a3000 0x001000>,	/* ap 76 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 77 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 78 */
+			 <0x00001c00 0x00001c00 0x000400>,	/* ap 79 */
+			 <0x000a5000 0x000a5000 0x001000>,	/* ap 80 */
+			 <0x0007a000 0x0007a000 0x001000>,	/* ap 81 */
+			 <0x0007b000 0x0007b000 0x001000>,	/* ap 82 */
+			 <0x0007c000 0x0007c000 0x001000>,	/* ap 83 */
+			 <0x0007d000 0x0007d000 0x001000>;	/* ap 84 */
+
+		target-module@20000 {			/* 0x48020000, ap 3 04.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart3: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@32000 {			/* 0x48032000, ap 5 3e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x32000 0x4>,
+			      <0x32010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x32000 0x1000>;
+
+			timer2: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer3_target: target-module@34000 {	/* 0x48034000, ap 7 46.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x34000 0x4>,
+			      <0x34010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x34000 0x1000>;
+
+			timer3: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer4_target: target-module@36000 {	/* 0x48036000, ap 9 4e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x36000 0x4>,
+			      <0x36010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+
+			timer4: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@3e000 {			/* 0x4803e000, ap 11 56.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			timer9: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio7_target: target-module@51000 {		/* 0x48051000, ap 45 2e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x51000 0x4>,
+			      <0x51010 0x4>,
+			      <0x51114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO7_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x51000 0x1000>;
+
+			gpio7: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@53000 {			/* 0x48053000, ap 35 36.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x53000 0x4>,
+			      <0x53010 0x4>,
+			      <0x53114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO8_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x53000 0x1000>;
+
+			gpio8: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		gpio2_target: target-module@55000 {		/* 0x48055000, ap 13 0e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55000 0x4>,
+			      <0x55010 0x4>,
+			      <0x55114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO2_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55000 0x1000>;
+
+			gpio2: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		gpio3_target: target-module@57000 {		/* 0x48057000, ap 15 06.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x57000 0x4>,
+			      <0x57010 0x4>,
+			      <0x57114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO3_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x57000 0x1000>;
+
+			gpio3: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@59000 {			/* 0x48059000, ap 17 16.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x59000 0x4>,
+			      <0x59010 0x4>,
+			      <0x59114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO4_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000 0x1000>;
+
+			gpio4: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5b000 {			/* 0x4805b000, ap 19 1e.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5b000 0x4>,
+			      <0x5b010 0x4>,
+			      <0x5b114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO5_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+
+			gpio5: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@5d000 {			/* 0x4805d000, ap 21 26.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x5d000 0x4>,
+			      <0x5d010 0x4>,
+			      <0x5d114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 0>,
+				 <&l4per_clkctrl DRA7_L4PER_GPIO6_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+
+			gpio6: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@60000 {			/* 0x48060000, ap 23 32.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x60000 0x8>,
+			      <0x60010 0x8>,
+			      <0x60090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			i2c3: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@66000 {			/* 0x48066000, ap 63 14.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x66050 0x4>,
+			      <0x66054 0x4>,
+			      <0x66058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x66000 0x1000>;
+
+			uart5: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@68000 {			/* 0x48068000, ap 53 1c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x68050 0x4>,
+			      <0x68054 0x4>,
+			      <0x68058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_UART6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x68000 0x1000>;
+
+			uart6: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@6a000 {			/* 0x4806a000, ap 24 24.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6a050 0x4>,
+			      <0x6a054 0x4>,
+			      <0x6a058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6a000 0x1000>;
+
+			uart1: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@6c000 {			/* 0x4806c000, ap 26 2c.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6c050 0x4>,
+			      <0x6c054 0x4>,
+			      <0x6c058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x1000>;
+
+			uart2: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+				dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@6e000 {			/* 0x4806e000, ap 28 0c.1 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x6e050 0x4>,
+			      <0x6e054 0x4>,
+			      <0x6e058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_UART4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6e000 0x1000>;
+
+			uart4: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+			                        status = "disabled";
+				dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		target-module@70000 {			/* 0x48070000, ap 30 22.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x70000 0x8>,
+			      <0x70010 0x8>,
+			      <0x70090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x1000>;
+
+			i2c1: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@72000 {			/* 0x48072000, ap 32 2a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x72000 0x8>,
+			      <0x72010 0x8>,
+			      <0x72090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x72000 0x1000>;
+
+			i2c2: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@78000 {			/* 0x48078000, ap 39 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x78000 0x4>,
+			      <0x78010 0x4>,
+			      <0x78014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_ELM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x1000>;
+
+			elm: elm@0 {
+				compatible = "ti,am3352-elm";
+				reg = <0x0 0xfc0>;      /* device IO registers */
+				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+		};
+
+		target-module@7a000 {			/* 0x4807a000, ap 81 3a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7a000 0x8>,
+			      <0x7a010 0x8>,
+			      <0x7a090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_I2C4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7a000 0x1000>;
+
+			i2c4: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@7c000 {			/* 0x4807c000, ap 83 4a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x7c000 0x8>,
+			      <0x7c010 0x8>,
+			      <0x7c090 0x8>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_I2C5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7c000 0x1000>;
+
+			i2c5: i2c@0 {
+				compatible = "ti,omap4-i2c";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		target-module@86000 {			/* 0x48086000, ap 41 5e.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x86000 0x4>,
+			      <0x86010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x86000 0x1000>;
+
+			timer10: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@88000 {			/* 0x48088000, ap 43 66.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x88000 0x4>,
+			      <0x88010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x88000 0x1000>;
+
+			timer11: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@90000 {			/* 0x48090000, ap 55 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x91fe0 0x4>,
+			      <0x91fe4 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_RNG_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x90000 0x2000>;
+
+			rng: rng@0 {
+				compatible = "ti,omap4-rng";
+				reg = <0x0 0x2000>;
+				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@98000 {			/* 0x48098000, ap 47 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x98000 0x4>,
+			      <0x98010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x98000 0x1000>;
+
+			mcspi1: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <4>;
+				dmas = <&sdma_xbar 35>,
+				       <&sdma_xbar 36>,
+				       <&sdma_xbar 37>,
+				       <&sdma_xbar 38>,
+				       <&sdma_xbar 39>,
+				       <&sdma_xbar 40>,
+				       <&sdma_xbar 41>,
+				       <&sdma_xbar 42>;
+				dma-names = "tx0", "rx0", "tx1", "rx1",
+					    "tx2", "rx2", "tx3", "rx3";
+				status = "disabled";
+			};
+		};
+
+		target-module@9a000 {			/* 0x4809a000, ap 49 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9a000 0x4>,
+			      <0x9a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9a000 0x1000>;
+
+			mcspi2: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma_xbar 43>,
+				       <&sdma_xbar 44>,
+				       <&sdma_xbar 45>,
+				       <&sdma_xbar 46>;
+				dma-names = "tx0", "rx0", "tx1", "rx1";
+				status = "disabled";
+			};
+		};
+
+		target-module@9c000 {			/* 0x4809c000, ap 51 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x9c000 0x4>,
+			      <0x9c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_MMC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9c000 0x1000>;
+
+			mmc1: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				pbias-supply = <&pbias_mmc_reg>;
+				max-frequency = <192000000>;
+				mmc-ddr-1_8v;
+				mmc-ddr-3_3v;
+			};
+		};
+
+		target-module@a2000 {			/* 0x480a2000, ap 75 02.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa2000 0x1000>;
+		};
+
+		target-module@a4000 {			/* 0x480a4000, ap 57 42.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x000a4000 0x00001000>,
+				 <0x00001000 0x000a5000 0x00001000>;
+		};
+
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
+		};
+
+		target-module@a8000 {			/* 0x480a8000, ap 59 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa8000 0x4000>;
+		};
+
+		target-module@ad000 {			/* 0x480ad000, ap 61 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xad000 0x4>,
+			      <0xad010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MMC3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xad000 0x1000>;
+
+			mmc3: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				/* Errata i887 limits max-frequency of MMC3 to 64 MHz */
+				max-frequency = <64000000>;
+				/* SDMA is not supported */
+				sdhci-caps-mask = <0x0 0x400000>;
+			};
+		};
+
+		target-module@b2000 {			/* 0x480b2000, ap 37 52.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb2000 0x4>,
+			      <0xb2014 0x4>,
+			      <0xb2018 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,syss-mask = <1>;
+			ti,no-reset-on-init;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_HDQ1W_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb2000 0x1000>;
+
+			hdqw1w: 1w@0 {
+				compatible = "ti,omap3-1w";
+				reg = <0x0 0x1000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@b4000 {			/* 0x480b4000, ap 65 40.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb4000 0x4>,
+			      <0xb4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_MMC2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb4000 0x1000>;
+
+			mmc2: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				max-frequency = <192000000>;
+				/* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
+				sdhci-caps-mask = <0x7 0x0>;
+				mmc-hs200-1_8v;
+				mmc-ddr-1_8v;
+				mmc-ddr-3_3v;
+			};
+		};
+
+		target-module@b8000 {			/* 0x480b8000, ap 67 48.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xb8000 0x4>,
+			      <0xb8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb8000 0x1000>;
+
+			mcspi3: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <2>;
+				dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
+				dma-names = "tx0", "rx0";
+				status = "disabled";
+			};
+		};
+
+		target-module@ba000 {			/* 0x480ba000, ap 69 18.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xba000 0x4>,
+			      <0xba010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MCSPI4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xba000 0x1000>;
+
+			mcspi4: spi@0 {
+				compatible = "ti,omap4-mcspi";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,spi-num-cs = <1>;
+				dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
+				dma-names = "tx0", "rx0";
+				status = "disabled";
+			};
+		};
+
+		target-module@d1000 {			/* 0x480d1000, ap 71 28.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xd1000 0x4>,
+			      <0xd1010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
+			clocks = <&l4per_clkctrl DRA7_L4PER_MMC4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd1000 0x1000>;
+
+			mmc4: mmc@0 {
+				compatible = "ti,dra7-sdhci";
+				reg = <0x0 0x400>;
+				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+				max-frequency = <192000000>;
+				/* SDMA is not supported */
+				sdhci-caps-mask = <0x0 0x400000>;
+			};
+		};
+
+		target-module@d5000 {			/* 0x480d5000, ap 73 30.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xd5000 0x1000>;
+		};
+	};
+
+	segment@200000 {					/* 0x48200000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&l4_per2 {						/* 0x48400000 */
+	compatible = "ti,dra7-l4-per2", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x48400000 0x800>,
+	      <0x48400800 0x800>,
+	      <0x48401000 0x400>,
+	      <0x48401400 0x400>,
+	      <0x48401800 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48400000 0x400000>,	/* segment 0 */
+		 <0x45800000 0x45800000 0x400000>,	/* L3 data port */
+		 <0x45c00000 0x45c00000 0x400000>,	/* L3 data port */
+		 <0x46000000 0x46000000 0x400000>,	/* L3 data port */
+		 <0x48436000 0x48436000 0x400000>,	/* L3 data port */
+		 <0x4843a000 0x4843a000 0x400000>,	/* L3 data port */
+		 <0x4844c000 0x4844c000 0x400000>,	/* L3 data port */
+		 <0x48450000 0x48450000 0x400000>,	/* L3 data port */
+		 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
+
+	segment@0 {					/* 0x48400000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00084000 0x00084000 0x004000>,	/* ap 3 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 4 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 5 */
+			 <0x00088000 0x00088000 0x001000>,	/* ap 6 */
+			 <0x0002c000 0x0002c000 0x001000>,	/* ap 7 */
+			 <0x0002d000 0x0002d000 0x001000>,	/* ap 8 */
+			 <0x00060000 0x00060000 0x002000>,	/* ap 9 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 10 */
+			 <0x00064000 0x00064000 0x002000>,	/* ap 11 */
+			 <0x00066000 0x00066000 0x001000>,	/* ap 12 */
+			 <0x00068000 0x00068000 0x002000>,	/* ap 13 */
+			 <0x0006a000 0x0006a000 0x001000>,	/* ap 14 */
+			 <0x0006c000 0x0006c000 0x002000>,	/* ap 15 */
+			 <0x0006e000 0x0006e000 0x001000>,	/* ap 16 */
+			 <0x00036000 0x00036000 0x001000>,	/* ap 17 */
+			 <0x00037000 0x00037000 0x001000>,	/* ap 18 */
+			 <0x00070000 0x00070000 0x002000>,	/* ap 19 */
+			 <0x00072000 0x00072000 0x001000>,	/* ap 20 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 21 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 22 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 23 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 24 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 25 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 26 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 27 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 28 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 29 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 30 */
+			 <0x00080000 0x00080000 0x002000>,	/* ap 31 */
+			 <0x00082000 0x00082000 0x001000>,	/* ap 32 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 33 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 34 */
+			 <0x00074000 0x00074000 0x002000>,	/* ap 35 */
+			 <0x00076000 0x00076000 0x001000>,	/* ap 36 */
+			 <0x00050000 0x00050000 0x001000>,	/* ap 37 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 38 */
+			 <0x00078000 0x00078000 0x002000>,	/* ap 39 */
+			 <0x0007a000 0x0007a000 0x001000>,	/* ap 40 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 41 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 42 */
+			 <0x0007c000 0x0007c000 0x002000>,	/* ap 43 */
+			 <0x0007e000 0x0007e000 0x001000>,	/* ap 44 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 45 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 46 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 47 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 48 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 49 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 50 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 51 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 52 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 53 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 54 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 55 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 56 */
+			 <0x00058000 0x00058000 0x002000>,	/* ap 57 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 58 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 59 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 60 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 61 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 62 */
+			 <0x45800000 0x45800000 0x400000>,	/* L3 data port */
+			 <0x45c00000 0x45c00000 0x400000>,	/* L3 data port */
+			 <0x46000000 0x46000000 0x400000>,	/* L3 data port */
+			 <0x48436000 0x48436000 0x400000>,	/* L3 data port */
+			 <0x4843a000 0x4843a000 0x400000>,	/* L3 data port */
+			 <0x4844c000 0x4844c000 0x400000>,	/* L3 data port */
+			 <0x48450000 0x48450000 0x400000>,	/* L3 data port */
+			 <0x48454000 0x48454000 0x400000>;	/* L3 data port */
+
+		target-module@20000 {			/* 0x48420000, ap 47 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x20050 0x4>,
+			      <0x20054 0x4>,
+			      <0x20058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			uart7: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@22000 {			/* 0x48422000, ap 49 0a.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x22050 0x4>,
+			      <0x22054 0x4>,
+			      <0x22058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			uart8: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@24000 {			/* 0x48424000, ap 51 12.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x24050 0x4>,
+			      <0x24054 0x4>,
+			      <0x24058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_UART9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			uart9: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@2c000 {			/* 0x4842c000, ap 7 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2c000 0x1000>;
+		};
+
+		target-module@36000 {			/* 0x48436000, ap 17 06.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x36000 0x1000>;
+		};
+
+		target-module@3a000 {			/* 0x4843a000, ap 21 3e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>;
+		};
+
+		atl_tm: target-module@3c000 {		/* 0x4843c000, ap 23 08.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3c000 0x4>;
+			reg-names = "rev";
+			clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>;
+
+			atl: atl@0 {
+				compatible = "ti,dra7-atl";
+				reg = <0x0 0x3ff>;
+				ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
+						     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
+				clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		target-module@3e000 {			/* 0x4843e000, ap 25 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			epwmss0: epwmss@0 {
+				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+				reg = <0x0 0x30>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap0: pwm@100 {
+					compatible = "ti,dra746-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4_root_clk_div>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm0: pwm@200 {
+					compatible = "ti,dra746-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@40000 {			/* 0x48440000, ap 27 38.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			epwmss1: epwmss@0 {
+				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+				reg = <0x0 0x30>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap1: pwm@100 {
+					compatible = "ti,dra746-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4_root_clk_div>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm1: pwm@200 {
+					compatible = "ti,dra746-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@42000 {			/* 0x48442000, ap 29 20.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_EPWMSS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			epwmss2: epwmss@0 {
+				compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+				reg = <0x0 0x30>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+				ranges = <0 0 0x1000>;
+
+				ecap2: pwm@100 {
+					compatible = "ti,dra746-ecap",
+						     "ti,am3352-ecap";
+					#pwm-cells = <3>;
+					reg = <0x100 0x80>;
+					clocks = <&l4_root_clk_div>;
+					clock-names = "fck";
+					status = "disabled";
+				};
+
+				ehrpwm2: pwm@200 {
+					compatible = "ti,dra746-ehrpwm",
+						     "ti,am3352-ehrpwm";
+					#pwm-cells = <3>;
+					reg = <0x200 0x80>;
+					clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
+					clock-names = "tbclk", "fck";
+					status = "disabled";
+				};
+			};
+		};
+
+		target-module@46000 {			/* 0x48446000, ap 53 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+		};
+
+		target-module@48000 {			/* 0x48448000, ap 55 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+		};
+
+		target-module@4a000 {			/* 0x4844a000, ap 33 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+		};
+
+		target-module@4c000 {			/* 0x4844c000, ap 45 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+		};
+
+		target-module@50000 {			/* 0x48450000, ap 37 24.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x50000 0x1000>;
+		};
+
+		target-module@54000 {			/* 0x48454000, ap 41 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54000 0x1000>;
+		};
+
+		target-module@58000 {			/* 0x48458000, ap 57 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58000 0x2000>;
+		};
+
+		target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5b000 0x1000>;
+		};
+
+		target-module@5d000 {			/* 0x4845d000, ap 61 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5d000 0x1000>;
+		};
+
+		target-module@60000 {			/* 0x48460000, ap 9 0e.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x60000 0x4>,
+			      <0x60004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
+				 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+				 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x2000>,
+				 <0x45800000 0x45800000 0x400000>;
+
+			mcasp1: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x45800000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
+				dma-names = "tx", "rx";
+				clocks = <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 0>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 28>;
+				clock-names = "fck", "ahclkx", "ahclkr";
+				status = "disabled";
+			};
+		};
+
+		target-module@64000 {			/* 0x48464000, ap 11 1e.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x64000 0x4>,
+			      <0x64004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 24>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
+			clock-names = "fck", "ahclkx", "ahclkr";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x2000>,
+				 <0x45c00000 0x45c00000 0x400000>;
+
+			mcasp2: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x45c00000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 0>,
+					 <&ipu_clkctrl DRA7_IPU_MCASP1_CLKCTRL 24>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP2_CLKCTRL 28>;
+				clock-names = "fck", "ahclkx", "ahclkr";
+				status = "disabled";
+			};
+		};
+
+		target-module@68000 {			/* 0x48468000, ap 13 26.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x68000 0x4>,
+			      <0x68004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x68000 0x2000>,
+				 <0x46000000 0x46000000 0x400000>;
+
+			mcasp3: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x46000000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@6c000 {			/* 0x4846c000, ap 15 2e.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x6c000 0x4>,
+			      <0x6c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6c000 0x2000>,
+				 <0x48436000 0x48436000 0x400000>;
+
+			mcasp4: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x48436000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP4_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@70000 {			/* 0x48470000, ap 19 36.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x70000 0x4>,
+			      <0x70004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x70000 0x2000>,
+				 <0x4843a000 0x4843a000 0x400000>;
+
+			mcasp5: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x4843a000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP5_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@74000 {			/* 0x48474000, ap 35 14.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x74000 0x4>,
+			      <0x74004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x74000 0x2000>,
+				 <0x4844c000 0x4844c000 0x400000>;
+
+			mcasp6: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x4844c000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP6_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@78000 {			/* 0x48478000, ap 39 0c.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x78000 0x4>,
+			      <0x78004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x78000 0x2000>,
+				 <0x48450000 0x48450000 0x400000>;
+
+			mcasp7: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x48450000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP7_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@7c000 {			/* 0x4847c000, ap 43 04.0 */
+			compatible = "ti,sysc-dra7-mcasp", "ti,sysc";
+			reg = <0x7c000 0x4>,
+			      <0x7c004 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): l4per_pwrdm, l4per2_clkdm */
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
+				 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+			clock-names = "fck", "ahclkx";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7c000 0x2000>,
+				 <0x48454000 0x48454000 0x400000>;
+
+			mcasp8: mcasp@0 {
+				compatible = "ti,dra7-mcasp-audio";
+				reg = <0x0 0x2000>,
+				      <0x48454000 0x1000>;	/* L3 data port */
+				reg-names = "mpu","dat";
+				interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "tx", "rx";
+				dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
+				dma-names = "tx", "rx";
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 0>,
+					 <&l4per2_clkctrl DRA7_L4PER2_MCASP8_CLKCTRL 24>;
+				clock-names = "fck", "ahclkx";
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48480000, ap 31 16.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x80020 0x4>;
+			reg-names = "rev";
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_DCAN2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x2000>;
+
+			dcan2: can@0 {
+				compatible = "ti,dra7-d_can";
+				reg = <0x0 0x2000>;
+				syscon-raminit = <&scm_conf 0x558 1>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sys_clkin1>;
+				status = "disabled";
+			};
+		};
+
+		target-module@84000 {			/* 0x48484000, ap 3 10.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x85200 0x4>,
+			      <0x85208 0x4>,
+			      <0x85204 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <0>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,syss-mask = <1>;
+			clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x84000 0x4000>;
+			/*
+			 * Do not allow gating of cpsw clock as workaround
+			 * for errata i877. Keeping internal clock disabled
+			 * causes the device switching characteristics
+			 * to degrade over time and eventually fail to meet
+			 * the data manual delay time/skew specs.
+			 */
+			ti,no-idle;
+
+			mac_sw: switch@0 {
+				compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
+				reg = <0x0 0x4000>;
+				ranges = <0 0 0x4000>;
+				clocks = <&gmac_main_clk>;
+				clock-names = "fck";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				syscon = <&scm_conf>;
+				status = "disabled";
+
+				interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "rx_thresh", "rx", "tx", "misc";
+
+				ethernet-ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					cpsw_port1: port@1 {
+						reg = <1>;
+						label = "port1";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 1>;
+					};
+
+					cpsw_port2: port@2 {
+						reg = <2>;
+						label = "port2";
+						mac-address = [ 00 00 00 00 00 00 ];
+						phys = <&phy_gmii_sel 2>;
+					};
+				};
+
+				davinci_mdio_sw: mdio@1000 {
+					compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+					clocks = <&gmac_main_clk>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <0>;
+					bus_freq = <1000000>;
+					reg = <0x1000 0x100>;
+				};
+
+				cpts {
+					clocks = <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
+					clock-names = "cpts";
+				};
+			};
+		};
+	};
+};
+
+&l4_per3 {						/* 0x48800000 */
+	compatible = "ti,dra7-l4-per3", "simple-pm-bus";
+	power-domains = <&prm_l4per>;
+	clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x48800000 0x800>,
+	      <0x48800800 0x800>,
+	      <0x48801000 0x400>,
+	      <0x48801400 0x400>,
+	      <0x48801800 0x400>;
+	reg-names = "ap", "la", "ia0", "ia1", "ia2";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x48800000 0x200000>;	/* segment 0 */
+
+	segment@0 {					/* 0x48800000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 1 */
+			 <0x00001000 0x00001000 0x000400>,	/* ap 2 */
+			 <0x00001400 0x00001400 0x000400>,	/* ap 3 */
+			 <0x00001800 0x00001800 0x000400>,	/* ap 4 */
+			 <0x00020000 0x00020000 0x001000>,	/* ap 5 */
+			 <0x00021000 0x00021000 0x001000>,	/* ap 6 */
+			 <0x00022000 0x00022000 0x001000>,	/* ap 7 */
+			 <0x00023000 0x00023000 0x001000>,	/* ap 8 */
+			 <0x00024000 0x00024000 0x001000>,	/* ap 9 */
+			 <0x00025000 0x00025000 0x001000>,	/* ap 10 */
+			 <0x00026000 0x00026000 0x001000>,	/* ap 11 */
+			 <0x00027000 0x00027000 0x001000>,	/* ap 12 */
+			 <0x00028000 0x00028000 0x001000>,	/* ap 13 */
+			 <0x00029000 0x00029000 0x001000>,	/* ap 14 */
+			 <0x0002a000 0x0002a000 0x001000>,	/* ap 15 */
+			 <0x0002b000 0x0002b000 0x001000>,	/* ap 16 */
+			 <0x0002c000 0x0002c000 0x001000>,	/* ap 17 */
+			 <0x0002d000 0x0002d000 0x001000>,	/* ap 18 */
+			 <0x0002e000 0x0002e000 0x001000>,	/* ap 19 */
+			 <0x0002f000 0x0002f000 0x001000>,	/* ap 20 */
+			 <0x00170000 0x00170000 0x010000>,	/* ap 21 */
+			 <0x00180000 0x00180000 0x001000>,	/* ap 22 */
+			 <0x00190000 0x00190000 0x010000>,	/* ap 23 */
+			 <0x001a0000 0x001a0000 0x001000>,	/* ap 24 */
+			 <0x001b0000 0x001b0000 0x010000>,	/* ap 25 */
+			 <0x001c0000 0x001c0000 0x001000>,	/* ap 26 */
+			 <0x001d0000 0x001d0000 0x010000>,	/* ap 27 */
+			 <0x001e0000 0x001e0000 0x001000>,	/* ap 28 */
+			 <0x00038000 0x00038000 0x001000>,	/* ap 29 */
+			 <0x00039000 0x00039000 0x001000>,	/* ap 30 */
+			 <0x0005c000 0x0005c000 0x001000>,	/* ap 31 */
+			 <0x0005d000 0x0005d000 0x001000>,	/* ap 32 */
+			 <0x0003a000 0x0003a000 0x001000>,	/* ap 33 */
+			 <0x0003b000 0x0003b000 0x001000>,	/* ap 34 */
+			 <0x0003c000 0x0003c000 0x001000>,	/* ap 35 */
+			 <0x0003d000 0x0003d000 0x001000>,	/* ap 36 */
+			 <0x0003e000 0x0003e000 0x001000>,	/* ap 37 */
+			 <0x0003f000 0x0003f000 0x001000>,	/* ap 38 */
+			 <0x00040000 0x00040000 0x001000>,	/* ap 39 */
+			 <0x00041000 0x00041000 0x001000>,	/* ap 40 */
+			 <0x00042000 0x00042000 0x001000>,	/* ap 41 */
+			 <0x00043000 0x00043000 0x001000>,	/* ap 42 */
+			 <0x00044000 0x00044000 0x001000>,	/* ap 43 */
+			 <0x00045000 0x00045000 0x001000>,	/* ap 44 */
+			 <0x00046000 0x00046000 0x001000>,	/* ap 45 */
+			 <0x00047000 0x00047000 0x001000>,	/* ap 46 */
+			 <0x00048000 0x00048000 0x001000>,	/* ap 47 */
+			 <0x00049000 0x00049000 0x001000>,	/* ap 48 */
+			 <0x0004a000 0x0004a000 0x001000>,	/* ap 49 */
+			 <0x0004b000 0x0004b000 0x001000>,	/* ap 50 */
+			 <0x0004c000 0x0004c000 0x001000>,	/* ap 51 */
+			 <0x0004d000 0x0004d000 0x001000>,	/* ap 52 */
+			 <0x0004e000 0x0004e000 0x001000>,	/* ap 53 */
+			 <0x0004f000 0x0004f000 0x001000>,	/* ap 54 */
+			 <0x00050000 0x00050000 0x001000>,	/* ap 55 */
+			 <0x00051000 0x00051000 0x001000>,	/* ap 56 */
+			 <0x00052000 0x00052000 0x001000>,	/* ap 57 */
+			 <0x00053000 0x00053000 0x001000>,	/* ap 58 */
+			 <0x00054000 0x00054000 0x001000>,	/* ap 59 */
+			 <0x00055000 0x00055000 0x001000>,	/* ap 60 */
+			 <0x00056000 0x00056000 0x001000>,	/* ap 61 */
+			 <0x00057000 0x00057000 0x001000>,	/* ap 62 */
+			 <0x00058000 0x00058000 0x001000>,	/* ap 63 */
+			 <0x00059000 0x00059000 0x001000>,	/* ap 64 */
+			 <0x0005a000 0x0005a000 0x001000>,	/* ap 65 */
+			 <0x0005b000 0x0005b000 0x001000>,	/* ap 66 */
+			 <0x00064000 0x00064000 0x001000>,	/* ap 67 */
+			 <0x00065000 0x00065000 0x001000>,	/* ap 68 */
+			 <0x0005e000 0x0005e000 0x001000>,	/* ap 69 */
+			 <0x0005f000 0x0005f000 0x001000>,	/* ap 70 */
+			 <0x00060000 0x00060000 0x001000>,	/* ap 71 */
+			 <0x00061000 0x00061000 0x001000>,	/* ap 72 */
+			 <0x00062000 0x00062000 0x001000>,	/* ap 73 */
+			 <0x00063000 0x00063000 0x001000>,	/* ap 74 */
+			 <0x00140000 0x00140000 0x020000>,	/* ap 75 */
+			 <0x00160000 0x00160000 0x001000>,	/* ap 76 */
+			 <0x00016000 0x00016000 0x001000>,	/* ap 77 */
+			 <0x00017000 0x00017000 0x001000>,	/* ap 78 */
+			 <0x000c0000 0x000c0000 0x020000>,	/* ap 79 */
+			 <0x000e0000 0x000e0000 0x001000>,	/* ap 80 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 81 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 82 */
+			 <0x00080000 0x00080000 0x020000>,	/* ap 83 */
+			 <0x000a0000 0x000a0000 0x001000>,	/* ap 84 */
+			 <0x00100000 0x00100000 0x020000>,	/* ap 85 */
+			 <0x00120000 0x00120000 0x001000>,	/* ap 86 */
+			 <0x00010000 0x00010000 0x001000>,	/* ap 87 */
+			 <0x00011000 0x00011000 0x001000>,	/* ap 88 */
+			 <0x0000a000 0x0000a000 0x001000>,	/* ap 89 */
+			 <0x0000b000 0x0000b000 0x001000>,	/* ap 90 */
+			 <0x0001c000 0x0001c000 0x001000>,	/* ap 91 */
+			 <0x0001d000 0x0001d000 0x001000>,	/* ap 92 */
+			 <0x0001e000 0x0001e000 0x001000>,	/* ap 93 */
+			 <0x0001f000 0x0001f000 0x001000>,	/* ap 94 */
+			 <0x00002000 0x00002000 0x001000>,	/* ap 95 */
+			 <0x00003000 0x00003000 0x001000>;	/* ap 96 */
+
+		target-module@2000 {			/* 0x48802000, ap 95 7c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x2000 0x4>,
+			      <0x2010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX13_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+
+			mailbox13: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@4000 {			/* 0x48804000, ap 81 20.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+		};
+
+		target-module@a000 {			/* 0x4880a000, ap 89 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xa000 0x1000>;
+		};
+
+		target-module@10000 {			/* 0x48810000, ap 87 28.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x10000 0x1000>;
+		};
+
+		target-module@16000 {			/* 0x48816000, ap 77 1e.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x16000 0x1000>;
+		};
+
+		target-module@1c000 {			/* 0x4881c000, ap 91 1c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1c000 0x1000>;
+		};
+
+		target-module@1e000 {			/* 0x4881e000, ap 93 2c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1e000 0x1000>;
+		};
+
+		target-module@20000 {			/* 0x48820000, ap 5 08.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x20000 0x4>,
+			      <0x20010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x20000 0x1000>;
+
+			timer5: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@22000 {			/* 0x48822000, ap 7 24.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x22000 0x4>,
+			      <0x22010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x22000 0x1000>;
+
+			timer6: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@24000 {			/* 0x48824000, ap 9 26.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x24000 0x4>,
+			      <0x24010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x24000 0x1000>;
+
+			timer7: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@26000 {			/* 0x48826000, ap 11 0c.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x26000 0x4>,
+			      <0x26010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x26000 0x1000>;
+
+			timer8: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		target-module@28000 {			/* 0x48828000, ap 13 16.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x28000 0x4>,
+			      <0x28010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x28000 0x1000>;
+
+			timer13: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		target-module@2a000 {			/* 0x4882a000, ap 15 10.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x2a000 0x4>,
+			      <0x2a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2a000 0x1000>;
+
+			timer14: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+		timer15_target: target-module@2c000 {	/* 0x4882c000, ap 17 02.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x2c000 0x4>,
+			      <0x2c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2c000 0x1000>;
+
+			timer15: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		timer16_target: target-module@2e000 {	/* 0x4882e000, ap 19 14.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x2e000 0x4>,
+			      <0x2e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l4per_pwrdm, l4per3_clkdm */
+			clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2e000 0x1000>;
+
+			timer16: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
+				interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-pwm;
+			};
+		};
+
+		rtctarget: target-module@38000 {			/* 0x48838000, ap 29 12.0 */
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			reg = <0x38074 0x4>,
+			      <0x38078 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): rtc_pwrdm, rtc_clkdm */
+			clocks = <&rtc_clkctrl DRA7_RTC_RTCSS_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x38000 0x1000>;
+
+			rtc: rtc@0 {
+				compatible = "ti,am3352-rtc";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&sys_32k_ck>;
+			};
+		};
+
+		target-module@3a000 {			/* 0x4883a000, ap 33 3e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3a000 0x4>,
+			      <0x3a010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3a000 0x1000>;
+
+			mailbox2: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@3c000 {			/* 0x4883c000, ap 35 3a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3c000 0x4>,
+			      <0x3c010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3c000 0x1000>;
+
+			mailbox3: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@3e000 {			/* 0x4883e000, ap 37 46.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x3e000 0x4>,
+			      <0x3e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3e000 0x1000>;
+
+			mailbox4: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@40000 {			/* 0x48840000, ap 39 64.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x40000 0x4>,
+			      <0x40010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x40000 0x1000>;
+
+			mailbox5: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@42000 {			/* 0x48842000, ap 41 4e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x42000 0x4>,
+			      <0x42010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX6_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x42000 0x1000>;
+
+			mailbox6: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@44000 {			/* 0x48844000, ap 43 42.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x44000 0x4>,
+			      <0x44010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX7_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x44000 0x1000>;
+
+			mailbox7: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@46000 {			/* 0x48846000, ap 45 48.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x46000 0x4>,
+			      <0x46010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX8_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x46000 0x1000>;
+
+			mailbox8: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@48000 {			/* 0x48848000, ap 47 36.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x48000 0x1000>;
+		};
+
+		target-module@4a000 {			/* 0x4884a000, ap 49 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4a000 0x1000>;
+		};
+
+		target-module@4c000 {			/* 0x4884c000, ap 51 44.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4c000 0x1000>;
+		};
+
+		target-module@4e000 {			/* 0x4884e000, ap 53 4c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4e000 0x1000>;
+		};
+
+		target-module@50000 {			/* 0x48850000, ap 55 40.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x50000 0x1000>;
+		};
+
+		target-module@52000 {			/* 0x48852000, ap 57 54.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x52000 0x1000>;
+		};
+
+		target-module@54000 {			/* 0x48854000, ap 59 1a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x54000 0x1000>;
+		};
+
+		target-module@56000 {			/* 0x48856000, ap 61 22.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x56000 0x1000>;
+		};
+
+		target-module@58000 {			/* 0x48858000, ap 63 2a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x58000 0x1000>;
+		};
+
+		target-module@5a000 {			/* 0x4885a000, ap 65 5c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5a000 0x1000>;
+		};
+
+		target-module@5c000 {			/* 0x4885c000, ap 31 32.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5c000 0x1000>;
+		};
+
+		target-module@5e000 {			/* 0x4885e000, ap 69 6c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5e000 0x4>,
+			      <0x5e010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX9_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5e000 0x1000>;
+
+			mailbox9: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@60000 {			/* 0x48860000, ap 71 4a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x60000 0x4>,
+			      <0x60010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x60000 0x1000>;
+
+			mailbox10: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@62000 {			/* 0x48862000, ap 73 74.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x62000 0x4>,
+			      <0x62010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX11_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x62000 0x1000>;
+
+			mailbox11: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@64000 {			/* 0x48864000, ap 67 52.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x64000 0x4>,
+			      <0x64010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			/* Domains (P, C): core_pwrdm, l4cfg_clkdm */
+			clocks = <&l4cfg_clkctrl DRA7_L4CFG_MAILBOX12_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x64000 0x1000>;
+
+			mailbox12: mailbox@0 {
+				compatible = "ti,omap4-mailbox";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
+				#mbox-cells = <1>;
+				ti,mbox-num-users = <4>;
+				ti,mbox-num-fifos = <12>;
+				status = "disabled";
+			};
+		};
+
+		target-module@80000 {			/* 0x48880000, ap 83 0e.1 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x80000 0x4>,
+			      <0x80010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x80000 0x20000>;
+
+			omap_dwc3_1: omap_dwc3_1@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+
+				usb1: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy1>, <&usb3_phy1>;
+					phy-names = "usb2-phy", "usb3-phy";
+					maximum-speed = "super-speed";
+					dr_mode = "otg";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@c0000 {			/* 0x488c0000, ap 79 06.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc0000 0x4>,
+			      <0xc0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000 0x20000>;
+
+			omap_dwc3_2: omap_dwc3_2@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+
+				usb2: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					phys = <&usb2_phy2>;
+					phy-names = "usb2-phy";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+					snps,dis_metastability_quirk;
+				};
+			};
+		};
+
+		usb3_tm: target-module@100000 {		/* 0x48900000, ap 85 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x100000 0x4>,
+			      <0x100010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x100000 0x20000>;
+
+			omap_dwc3_3: omap_dwc3_3@0 {
+				compatible = "ti,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges = <0 0 0x20000>;
+				status = "disabled";
+
+				usb3: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+					snps,dis_u3_susphy_quirk;
+					snps,dis_u2_susphy_quirk;
+				};
+			};
+		};
+
+		target-module@170000 {			/* 0x48970000, ap 21 0a.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x170010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x170000 0x10000>;
+			status = "disabled";
+		};
+
+		target-module@190000 {			/* 0x48990000, ap 23 2e.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x190010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x190000 0x10000>;
+			status = "disabled";
+		};
+
+		target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1b0000 0x4>,
+			      <0x1b0010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1b0000 0x10000>;
+			status = "disabled";
+		};
+
+		target-module@1d0010 {			/* 0x489d0000, ap 27 30.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x1d0010 0x4>;
+			reg-names = "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_vpe>;
+			clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1d0000 0x10000>;
+
+			vpe: vpe@0 {
+				compatible = "ti,dra7-vpe";
+				reg = <0x0000 0x120>,
+				      <0x0700 0x80>,
+				      <0x5700 0x18>,
+				      <0xd000 0x400>;
+				reg-names = "vpe_top",
+					    "sc",
+					    "csc",
+					    "vpdma";
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+	};
+};
+
+&l4_wkup {						/* 0x4ae00000 */
+	compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
+	power-domains = <&prm_wkupaon>;
+	clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
+	clock-names = "fck";
+	reg = <0x4ae00000 0x800>,
+	      <0x4ae00800 0x800>,
+	      <0x4ae01000 0x1000>;
+	reg-names = "ap", "la", "ia0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0x00000000 0x4ae00000 0x010000>,	/* segment 0 */
+		 <0x00010000 0x4ae10000 0x010000>,	/* segment 1 */
+		 <0x00020000 0x4ae20000 0x010000>,	/* segment 2 */
+		 <0x00030000 0x4ae30000 0x010000>;	/* segment 3 */
+
+	segment@0 {					/* 0x4ae00000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x000800>,	/* ap 0 */
+			 <0x00001000 0x00001000 0x001000>,	/* ap 1 */
+			 <0x00000800 0x00000800 0x000800>,	/* ap 2 */
+			 <0x00006000 0x00006000 0x002000>,	/* ap 3 */
+			 <0x00008000 0x00008000 0x001000>,	/* ap 4 */
+			 <0x00004000 0x00004000 0x001000>,	/* ap 15 */
+			 <0x00005000 0x00005000 0x001000>,	/* ap 16 */
+			 <0x0000c000 0x0000c000 0x001000>,	/* ap 17 */
+			 <0x0000d000 0x0000d000 0x001000>;	/* ap 18 */
+
+		target-module@4000 {			/* 0x4ae04000, ap 15 40.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_COUNTER_32K_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			counter32k: counter@0 {
+				compatible = "ti,omap-counter32k";
+				reg = <0x0 0x40>;
+			};
+		};
+
+		target-module@6000 {			/* 0x4ae06000, ap 3 10.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x6000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x6000 0x2000>;
+
+			prm: prm@0 {
+				compatible = "ti,dra7-prm", "simple-bus";
+				reg = <0 0x3000>;
+				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0 0x3000>;
+
+				prm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae0c000, ap 17 50.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc000 0x4>;
+			reg-names = "rev";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+
+			scm_wkup: scm_conf@0 {
+				compatible = "syscon";
+				reg = <0 0x1000>;
+			};
+		};
+	};
+
+	segment@10000 {					/* 0x4ae10000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00010000 0x001000>,	/* ap 5 */
+			 <0x00001000 0x00011000 0x001000>,	/* ap 6 */
+			 <0x00004000 0x00014000 0x001000>,	/* ap 7 */
+			 <0x00005000 0x00015000 0x001000>,	/* ap 8 */
+			 <0x00008000 0x00018000 0x001000>,	/* ap 9 */
+			 <0x00009000 0x00019000 0x001000>,	/* ap 10 */
+			 <0x0000c000 0x0001c000 0x001000>,	/* ap 11 */
+			 <0x0000d000 0x0001d000 0x001000>;	/* ap 12 */
+
+		target-module@0 {			/* 0x4ae10000, ap 5 20.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>,
+			      <0x114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 0>,
+				 <&wkupaon_clkctrl DRA7_WKUPAON_GPIO1_CLKCTRL 8>;
+			clock-names = "fck", "dbclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			gpio1: gpio@0 {
+				compatible = "ti,omap4-gpio";
+				reg = <0x0 0x200>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+
+		target-module@4000 {			/* 0x4ae14000, ap 7 28.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4000 0x4>,
+			      <0x4010 0x4>,
+			      <0x4014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
+					 SYSC_OMAP2_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_WD_TIMER2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4000 0x1000>;
+
+			wdt2: wdt@0 {
+				compatible = "ti,omap3-wdt";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		timer1_target: target-module@8000 {	/* 0x4ae18000, ap 9 30.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x8000 0x4>,
+			      <0x8010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x8000 0x1000>;
+
+			timer1: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
+				clock-names = "fck";
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+			};
+		};
+
+		target-module@c000 {			/* 0x4ae1c000, ap 11 38.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x1000>;
+		};
+	};
+
+	segment@20000 {					/* 0x4ae20000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00006000 0x00026000 0x001000>,	/* ap 13 */
+			 <0x0000a000 0x0002a000 0x001000>,	/* ap 14 */
+			 <0x00000000 0x00020000 0x001000>,	/* ap 19 */
+			 <0x00001000 0x00021000 0x001000>,	/* ap 20 */
+			 <0x00002000 0x00022000 0x001000>,	/* ap 21 */
+			 <0x00003000 0x00023000 0x001000>,	/* ap 22 */
+			 <0x00007000 0x00027000 0x000400>,	/* ap 23 */
+			 <0x00008000 0x00028000 0x000800>,	/* ap 24 */
+			 <0x00009000 0x00029000 0x000100>,	/* ap 25 */
+			 <0x00008800 0x00028800 0x000200>,	/* ap 26 */
+			 <0x00008a00 0x00028a00 0x000100>,	/* ap 27 */
+			 <0x0000b000 0x0002b000 0x001000>,	/* ap 28 */
+			 <0x0000c000 0x0002c000 0x001000>,	/* ap 29 */
+			 <0x0000f000 0x0002f000 0x001000>;	/* ap 32 */
+
+		target-module@0 {			/* 0x4ae20000, ap 19 08.0 */
+			compatible = "ti,sysc-omap4-timer", "ti,sysc";
+			reg = <0x0 0x4>,
+			      <0x10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
+					 SYSC_OMAP4_SOFTRESET)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER12_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x0 0x1000>;
+
+			timer12: timer@0 {
+				compatible = "ti,omap5430-timer";
+				reg = <0x0 0x80>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				ti,timer-alwon;
+				ti,timer-secure;
+			};
+		};
+
+		target-module@2000 {			/* 0x4ae22000, ap 21 18.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x2000 0x1000>;
+		};
+
+		target-module@6000 {			/* 0x4ae26000, ap 13 48.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x00000000 0x00006000 0x00001000>,
+				 <0x00001000 0x00007000 0x00000400>,
+				 <0x00002000 0x00008000 0x00000800>,
+				 <0x00002800 0x00008800 0x00000200>,
+				 <0x00002a00 0x00008a00 0x00000100>,
+				 <0x00003000 0x00009000 0x00000100>;
+		};
+
+		target-module@b000 {			/* 0x4ae2b000, ap 28 02.0 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xb050 0x4>,
+			      <0xb054 0x4>,
+			      <0xb058 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): wkupaon_pwrdm, wkupaon_clkdm */
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_UART10_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xb000 0x1000>;
+
+			uart10: serial@0 {
+				compatible = "ti,dra742-uart";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+				clock-frequency = <48000000>;
+				status = "disabled";
+			};
+		};
+
+		target-module@f000 {			/* 0x4ae2f000, ap 32 58.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xf000 0x1000>;
+		};
+	};
+
+	segment@30000 {					/* 0x4ae30000 */
+		compatible = "simple-pm-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0000c000 0x0003c000 0x002000>,	/* ap 30 */
+			 <0x0000e000 0x0003e000 0x001000>,	/* ap 31 */
+			 <0x00000000 0x00030000 0x001000>,	/* ap 33 */
+			 <0x00001000 0x00031000 0x001000>,	/* ap 34 */
+			 <0x00002000 0x00032000 0x001000>,	/* ap 35 */
+			 <0x00003000 0x00033000 0x001000>,	/* ap 36 */
+			 <0x00004000 0x00034000 0x001000>,	/* ap 37 */
+			 <0x00005000 0x00035000 0x001000>,	/* ap 38 */
+			 <0x00006000 0x00036000 0x001000>,	/* ap 39 */
+			 <0x00007000 0x00037000 0x001000>,	/* ap 40 */
+			 <0x00008000 0x00038000 0x001000>,	/* ap 41 */
+			 <0x00009000 0x00039000 0x001000>,	/* ap 42 */
+			 <0x0000a000 0x0003a000 0x001000>;	/* ap 43 */
+
+		target-module@1000 {			/* 0x4ae31000, ap 34 60.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x1000 0x1000>;
+		};
+
+		target-module@3000 {			/* 0x4ae33000, ap 36 0a.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x3000 0x1000>;
+		};
+
+		target-module@5000 {			/* 0x4ae35000, ap 38 0c.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x5000 0x1000>;
+		};
+
+		target-module@7000 {			/* 0x4ae37000, ap 40 68.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x7000 0x1000>;
+		};
+
+		target-module@9000 {			/* 0x4ae39000, ap 42 70.0 */
+			compatible = "ti,sysc";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x9000 0x1000>;
+		};
+
+		target-module@c000 {			/* 0x4ae3c000, ap 30 04.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0xc020 0x4>;
+			reg-names = "rev";
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc000 0x2000>;
+
+			dcan1: can@0 {
+				compatible = "ti,dra7-d_can";
+				reg = <0x0 0x2000>;
+				syscon-raminit = <&scm_conf 0x558 0>;
+				interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&wkupaon_clkctrl DRA7_WKUPAON_DCAN1_CLKCTRL 24>;
+				status = "disabled";
+			};
+		};
+	};
+};
+
diff --git a/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..aa0947266526
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-mmc-iodelay.dtsi
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MMC IOdelay values for TI's DRA7xx SoCs.
+ * Copyright (C) 2018 Texas Instruments
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default_no_clk_pu: mmc1_pins_default_no_clk_pu {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 8f1e25bcecbd..97ce0c4f1df7 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1,25 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  * Based on "omap4.dtsi"
  */
 
+#include <dt-bindings/bus/ti-sysc.h>
+#include <dt-bindings/clock/dra7.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/dra.h>
-
-#include "skeleton.dtsi"
+#include <dt-bindings/clock/dra7.h>
 
 #define MAX_SOURCES 400
 
 / {
-	#address-cells = <1>;
-	#size-cells = <1>;
+	#address-cells = <2>;
+	#size-cells = <2>;
 
 	compatible = "ti,dra7xx";
 	interrupt-parent = <&crossbar_mpu>;
+	chosen { };
 
 	aliases {
 		i2c0 = &i2c1;
@@ -37,14 +37,16 @@
 		serial7 = &uart8;
 		serial8 = &uart9;
 		serial9 = &uart10;
-		ethernet0 = &cpsw_emac0;
-		ethernet1 = &cpsw_emac1;
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
 		d_can0 = &dcan1;
 		d_can1 = &dcan2;
+		spi0 = &qspi;
 	};
 
 	timer {
 		compatible = "arm,armv7-timer";
+		status = "disabled";	/* See ARM architected timer wrap erratum i940 */
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
@@ -56,10 +58,10 @@
 		compatible = "arm,cortex-a15-gic";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48211000 0x1000>,
-		      <0x48212000 0x1000>,
-		      <0x48214000 0x2000>,
-		      <0x48216000 0x2000>;
+		reg = <0x0 0x48211000 0x0 0x1000>,
+		      <0x0 0x48212000 0x0 0x2000>,
+		      <0x0 0x48214000 0x0 0x2000>,
+		      <0x0 0x48216000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 		interrupt-parent = <&gic>;
 	};
@@ -68,19 +70,58 @@
 		compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
 		interrupt-controller;
 		#interrupt-cells = <3>;
-		reg = <0x48281000 0x1000>;
+		reg = <0x0 0x48281000 0x0 0x1000>;
 		interrupt-parent = <&gic>;
 	};
 
-	/*
-	 * The soc node represents the soc top level view. It is used for IPs
-	 * that are not memory mapped in the MPU view or for the MPU itself.
-	 */
-	soc {
-		compatible = "ti,omap-infra";
-		mpu {
-			compatible = "ti,omap5-mpu";
-			ti,hwmods = "mpu";
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+
+			operating-points-v2 = <&cpu0_opp_table>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+
+			/* cooling options */
+			#cooling-cells = <2>; /* min followed by max */
+
+			vbb-supply = <&abb_mpu>;
+		};
+	};
+
+	cpu0_opp_table: opp-table {
+		compatible = "operating-points-v2-ti-cpu";
+		syscon = <&scm_wkup>;
+
+		opp_nom-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1060000 850000 1150000>,
+					<1060000 850000 1150000>;
+			opp-supported-hw = <0xFF 0x01>;
+			opp-suspend;
+		};
+
+		opp_od-1176000000 {
+			opp-hz = /bits/ 64 <1176000000>;
+			opp-microvolt = <1160000 885000 1160000>,
+					<1160000 885000 1160000>;
+
+			opp-supported-hw = <0xFF 0x02>;
+		};
+
+		opp_high@1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1210000 950000 1250000>,
+					<1210000 950000 1250000>;
+			opp-supported-hw = <0xFF 0x04>;
 		};
 	};
 
@@ -91,174 +132,160 @@
 	 * the moment, just use a fake OCP bus entry to represent the whole bus
 	 * hierarchy.
 	 */
-	ocp {
-		compatible = "ti,dra7-l3-noc", "simple-bus";
+	ocp: ocp {
+		compatible = "simple-pm-bus";
+		power-domains = <&prm_core>;
+		clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>,
+			 <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-		ranges;
-		ti,hwmods = "l3_main_1", "l3_main_2";
-		reg = <0x44000000 0x1000000>,
-		      <0x45000000 0x1000>;
-		interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-
-		l4_cfg: l4@4a000000 {
-			compatible = "ti,dra7-l4-cfg", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x4a000000 0x22c000>;
-
-			scm: scm@2000 {
-				compatible = "ti,dra7-scm-core", "simple-bus";
-				reg = <0x2000 0x2000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0 0x2000 0x2000>;
-
-				scm_conf: scm_conf@0 {
-					compatible = "syscon";
-					reg = <0x0 0x1400>;
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					pbias_regulator: pbias_regulator {
-						compatible = "ti,pbias-omap";
-						reg = <0xe00 0x4>;
-						syscon = <&scm_conf>;
-						pbias_mmc_reg: pbias_mmc_omap5 {
-							regulator-name = "pbias_mmc_omap5";
-							regulator-min-microvolt = <1800000>;
-							regulator-max-microvolt = <3000000>;
-						};
-					};
+		ranges = <0x0 0x0 0x0 0xc0000000>;
+		dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
 
-					scm_conf_clocks: clocks {
-						#address-cells = <1>;
-						#size-cells = <0>;
-					};
-				};
-
-				dra7_pmx_core: pinmux@1400 {
-					compatible = "ti,dra7-padconf",
-						     "pinctrl-single";
-					reg = <0x1400 0x0464>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					#interrupt-cells = <1>;
-					interrupt-controller;
-					pinctrl-single,register-width = <32>;
-					pinctrl-single,function-mask = <0x3fffffff>;
-				};
-			};
-
-			cm_core_aon: cm_core_aon@5000 {
-				compatible = "ti,dra7-cm-core-aon";
-				reg = <0x5000 0x2000>;
-
-				cm_core_aon_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				cm_core_aon_clockdomains: clockdomains {
-				};
-			};
-
-			cm_core: cm_core@8000 {
-				compatible = "ti,dra7-cm-core";
-				reg = <0x8000 0x3000>;
-
-				cm_core_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
+		l3-noc@44000000 {
+			compatible = "ti,dra7-l3-noc";
+			reg = <0x44000000 0x1000>,
+			      <0x45000000 0x1000>;
+			interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+					      <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-				cm_core_clockdomains: clockdomains {
-				};
-			};
+		l4_cfg: interconnect@4a000000 {
+		};
+		l4_wkup: interconnect@4ae00000 {
+		};
+		l4_per1: interconnect@48000000 {
 		};
 
-		l4_wkup: l4@4ae00000 {
-			compatible = "ti,dra7-l4-wkup", "simple-bus";
+		target-module@48210000 {
+			compatible = "ti,sysc-omap4-simple", "ti,sysc";
+			power-domains = <&prm_mpu>;
+			clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0 0x4ae00000 0x3f000>;
+			ranges = <0 0x48210000 0x1f0000>;
 
-			counter32k: counter@4000 {
-				compatible = "ti,omap-counter32k";
-				reg = <0x4000 0x40>;
-				ti,hwmods = "counter_32k";
+			mpu {
+				compatible = "ti,omap5-mpu";
 			};
+		};
 
-			prm: prm@6000 {
-				compatible = "ti,dra7-prm";
-				reg = <0x6000 0x3000>;
-				interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-
-				prm_clocks: clocks {
-					#address-cells = <1>;
-					#size-cells = <0>;
-				};
-
-				prm_clockdomains: clockdomains {
-				};
-			};
+		l4_per2: interconnect@48400000 {
+		};
+		l4_per3: interconnect@48800000 {
 		};
 
-		axi@0 {
-			compatible = "simple-bus";
+		/*
+		 * Register access seems to have complex dependencies and also
+		 * seems to need an enabled phy. See the TRM chapter for "Table
+		 * 26-678. Main Sequence PCIe Controller Global Initialization"
+		 * and also dra7xx_pcie_probe().
+		 */
+		axi0: target-module@51000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			power-domains = <&prm_l3init>;
+			resets = <&prm_l3init 0>;
+			reset-names = "rstctrl";
+			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>;
+			clock-names = "fck", "phy-clk", "phy-clk-div";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51000000 0x51000000 0x3000
-				  0x0	     0x20000000 0x10000000>;
-			pcie@51000000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+			ranges = <0x51000000 0x51000000 0x3000>,
+				 <0x20000000 0x20000000 0x10000000>;
+			dma-ranges;
+			/**
+			 * To enable PCI endpoint mode, disable the pcie1_rc
+			 * node and enable pcie1_ep mode.
+			 */
+			pcie1_rc: pcie@51000000 {
+				reg = <0x51000000 0x2000>,
+				      <0x51002000 0x14c>,
+				      <0x20001000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 232 0x4>, <0 233 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+				ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
+					 <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
-				ti,hwmods = "pcie1";
+				linux,pci-domain = <0>;
 				phys = <&pcie1_phy>;
 				phy-names = "pcie-phy0";
+				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
 				interrupt-map-mask = <0 0 0 7>;
 				interrupt-map = <0 0 0 1 &pcie1_intc 1>,
 						<0 0 0 2 &pcie1_intc 2>,
 						<0 0 0 3 &pcie1_intc 3>,
 						<0 0 0 4 &pcie1_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+				status = "disabled";
 				pcie1_intc: interrupt-controller {
 					interrupt-controller;
 					#address-cells = <0>;
 					#interrupt-cells = <1>;
 				};
 			};
+
+			pcie1_ep: pcie_ep@51000000 {
+				reg = <0x51000000 0x28>,
+				      <0x51002000 0x14c>,
+				      <0x51001000 0x28>,
+				      <0x20001000 0x10000000>;
+				reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
+				interrupts = <0 232 0x4>;
+				num-lanes = <1>;
+				num-ib-windows = <4>;
+				num-ob-windows = <16>;
+				phys = <&pcie1_phy>;
+				phy-names = "pcie-phy0";
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
+				ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
+				status = "disabled";
+			};
 		};
 
-		axi@1 {
-			compatible = "simple-bus";
+		/*
+		 * Register access seems to have complex dependencies and also
+		 * seems to need an enabled phy. See the TRM chapter for "Table
+		 * 26-678. Main Sequence PCIe Controller Global Initialization"
+		 * and also dra7xx_pcie_probe().
+		 */
+		axi1: target-module@51800000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
+				 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>;
+			clock-names = "fck", "phy-clk", "phy-clk-div";
+			power-domains = <&prm_l3init>;
+			resets = <&prm_l3init 1>;
+			reset-names = "rstctrl";
 			#size-cells = <1>;
 			#address-cells = <1>;
-			ranges = <0x51800000 0x51800000 0x3000
-				  0x0	     0x30000000 0x10000000>;
+			ranges = <0x51800000 0x51800000 0x3000>,
+				 <0x30000000 0x30000000 0x10000000>;
+			dma-ranges;
 			status = "disabled";
-			pcie@51000000 {
-				compatible = "ti,dra7-pcie";
-				reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+			pcie2_rc: pcie@51800000 {
+				reg = <0x51800000 0x2000>,
+				      <0x51802000 0x14c>,
+				      <0x30001000 0x2000>;
 				reg-names = "rc_dbics", "ti_conf", "config";
 				interrupts = <0 355 0x4>, <0 356 0x4>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				device_type = "pci";
-				ranges = <0x81000000 0 0          0x03000 0 0x00010000
-					  0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+				ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
+					 <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
+				bus-range = <0x00 0xff>;
 				#interrupt-cells = <1>;
 				num-lanes = <1>;
-				ti,hwmods = "pcie2";
+				linux,pci-domain = <1>;
 				phys = <&pcie2_phy>;
 				phy-names = "pcie-phy0";
 				interrupt-map-mask = <0 0 0 7>;
@@ -266,6 +293,7 @@
 						<0 0 0 2 &pcie2_intc 2>,
 						<0 0 0 3 &pcie2_intc 3>,
 						<0 0 0 4 &pcie2_intc 4>;
+				ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
 				pcie2_intc: interrupt-controller {
 					interrupt-controller;
 					#address-cells = <0>;
@@ -274,6 +302,53 @@
 			};
 		};
 
+		ocmcram1: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x80000>;
+			ranges = <0x0 0x40300000 0x80000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/*
+			 * This is a placeholder for an optional reserved
+			 * region for use by secure software. The size
+			 * of this region is not known until runtime so it
+			 * is set as zero to either be updated to reserve
+			 * space or left unchanged to leave all SRAM for use.
+			 * On HS parts that that require the reserved region
+			 * either the bootloader can update the size to
+			 * the required amount or the node can be overridden
+			 * from the board dts file for the secure platform.
+			 */
+			sram-hs@0 {
+				compatible = "ti,secure-ram";
+				reg = <0x0 0x0>;
+			};
+		};
+
+		/*
+		 * NOTE: ocmcram2 and ocmcram3 are not available on all
+		 * DRA7xx and AM57xx variants. Confirm availability in
+		 * the data manual for the exact part number in use
+		 * before enabling these nodes in the board dts file.
+		 */
+		ocmcram2: ocmcram@40400000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40400000 0x100000>;
+			ranges = <0x0 0x40400000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		ocmcram3: ocmcram@40500000 {
+			status = "disabled";
+			compatible = "mmio-sram";
+			reg = <0x40500000 0x100000>;
+			ranges = <0x0 0x40500000 0x100000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
 		bandgap: bandgap@4a0021e0 {
 			reg = <0x4a0021e0 0xc
 				0x4a00232c 0xc
@@ -286,624 +361,278 @@
 				#thermal-sensor-cells = <1>;
 		};
 
-		dra7_ctrl_core: ctrl_core@4a002000 {
+		dsp1_system: dsp_system@40d00000 {
 			compatible = "syscon";
-			reg = <0x4a002000 0x6d0>;
-		};
-
-		dra7_ctrl_general: tisyscon@4a002e00 {
-			compatible = "syscon";
-			reg = <0x4a002e00 0x7c>;
-		};
-
-		sdma: dma-controller@4a056000 {
-			compatible = "ti,omap4430-sdma";
-			reg = <0x4a056000 0x1000>;
-			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-			dma-channels = <32>;
-			dma-requests = <127>;
-		};
-
-		gpio1: gpio@4ae10000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4ae10000 0x200>;
-			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio1";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio2: gpio@48055000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48055000 0x200>;
-			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio2";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio3: gpio@48057000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48057000 0x200>;
-			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio3";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio4: gpio@48059000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48059000 0x200>;
-			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio4";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio5: gpio@4805b000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805b000 0x200>;
-			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio5";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio6: gpio@4805d000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x4805d000 0x200>;
-			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio6";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio7: gpio@48051000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48051000 0x200>;
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio7";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpio8: gpio@48053000 {
-			compatible = "ti,omap4-gpio";
-			reg = <0x48053000 0x200>;
-			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "gpio8";
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
+			reg = <0x40d00000 0x100>;
 		};
 
-		uart1: serial@4806a000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806a000 0x100>;
-			interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart1";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma 49>, <&sdma 50>;
-			dma-names = "tx", "rx";
-		};
-
-		uart2: serial@4806c000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806c000 0x100>;
-			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart2";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma 51>, <&sdma 52>;
-			dma-names = "tx", "rx";
-		};
-
-		uart3: serial@48020000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48020000 0x100>;
-			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart3";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma 53>, <&sdma 54>;
-			dma-names = "tx", "rx";
-		};
-
-		uart4: serial@4806e000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4806e000 0x100>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart4";
-			clock-frequency = <48000000>;
-                        status = "disabled";
-			dmas = <&sdma 55>, <&sdma 56>;
-			dma-names = "tx", "rx";
-		};
-
-		uart5: serial@48066000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48066000 0x100>;
-			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart5";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma 63>, <&sdma 64>;
-			dma-names = "tx", "rx";
-		};
-
-		uart6: serial@48068000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48068000 0x100>;
-			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart6";
-			clock-frequency = <48000000>;
-			status = "disabled";
-			dmas = <&sdma 79>, <&sdma 80>;
-			dma-names = "tx", "rx";
-		};
-
-		uart7: serial@48420000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48420000 0x100>;
-			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart7";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart8: serial@48422000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48422000 0x100>;
-			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart8";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart9: serial@48424000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x48424000 0x100>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart9";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		uart10: serial@4ae2b000 {
-			compatible = "ti,omap4-uart";
-			reg = <0x4ae2b000 0x100>;
-			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "uart10";
-			clock-frequency = <48000000>;
-			status = "disabled";
-		};
-
-		mailbox1: mailbox@4a0f4000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4a0f4000 0x200>;
-			interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox1";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <3>;
-			ti,mbox-num-fifos = <8>;
-			status = "disabled";
-		};
-
-		mailbox2: mailbox@4883a000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883a000 0x200>;
-			interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox2";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox3: mailbox@4883c000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883c000 0x200>;
-			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox3";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox4: mailbox@4883e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4883e000 0x200>;
-			interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox4";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox5: mailbox@48840000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48840000 0x200>;
-			interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox5";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox6: mailbox@48842000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48842000 0x200>;
-			interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox6";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox7: mailbox@48844000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48844000 0x200>;
-			interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox7";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox8: mailbox@48846000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48846000 0x200>;
-			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox8";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox9: mailbox@4885e000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x4885e000 0x200>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox9";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox10: mailbox@48860000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48860000 0x200>;
-			interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox10";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox11: mailbox@48862000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48862000 0x200>;
-			interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox11";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox12: mailbox@48864000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48864000 0x200>;
-			interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox12";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		mailbox13: mailbox@48802000 {
-			compatible = "ti,omap4-mailbox";
-			reg = <0x48802000 0x200>;
-			interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mailbox13";
-			#mbox-cells = <1>;
-			ti,mbox-num-users = <4>;
-			ti,mbox-num-fifos = <12>;
-			status = "disabled";
-		};
-
-		timer1: timer@4ae18000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4ae18000 0x80>;
-			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer1";
-			ti,timer-alwon;
-		};
-
-		timer2: timer@48032000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48032000 0x80>;
-			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer2";
-		};
-
-		timer3: timer@48034000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48034000 0x80>;
-			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer3";
-		};
-
-		timer4: timer@48036000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48036000 0x80>;
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer4";
-		};
-
-		timer5: timer@48820000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48820000 0x80>;
-			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer5";
-		};
-
-		timer6: timer@48822000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48822000 0x80>;
-			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer6";
+		dra7_iodelay_core: padconf@4844a000 {
+			compatible = "ti,dra7-iodelay";
+			reg = <0x4844a000 0x0d1c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#pinctrl-cells = <2>;
+		};
+
+		target-module@43300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43300000 0x4>,
+			      <0x43300010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43300000 0x100000>;
+
+			edma: dma@0 {
+				compatible = "ti,edma3-tpcc";
+				reg = <0 0x100000>;
+				reg-names = "edma3_cc";
+				interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_ccint", "edma3_mperr",
+						  "edma3_ccerrint";
+				dma-requests = <64>;
+				#dma-cells = <2>;
+
+				ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
+
+				/*
+				* memcpy is disabled, can be enabled with:
+				* ti,edma-memcpy-channels = <20 21>;
+				* for example. Note that these channels need to be
+				* masked in the xbar as well.
+				*/
+			};
 		};
 
-		timer7: timer@48824000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48824000 0x80>;
-			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer7";
-		};
+		target-module@43400000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43400000 0x4>,
+			      <0x43400010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43400000 0x100000>;
 
-		timer8: timer@48826000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48826000 0x80>;
-			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer8";
+			edma_tptc0: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		timer9: timer@4803e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4803e000 0x80>;
-			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer9";
-		};
+		target-module@43500000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x43500000 0x4>,
+			      <0x43500010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x43500000 0x100000>;
 
-		timer10: timer@48086000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48086000 0x80>;
-			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer10";
+			edma_tptc1: dma@0 {
+				compatible = "ti,edma3-tptc";
+				reg = <0 0x100000>;
+				interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "edma3_tcerrint";
+			};
 		};
 
-		timer11: timer@48088000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48088000 0x80>;
-			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer11";
-		};
+		target-module@4e000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4e000000 0x4>,
+			      <0x4e000010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ranges = <0x0 0x4e000000 0x2000000>;
+			#size-cells = <1>;
+			#address-cells = <1>;
 
-		timer13: timer@48828000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x48828000 0x80>;
-			interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer13";
-			status = "disabled";
+			dmm@0 {
+				compatible = "ti,omap5-dmm";
+				reg = <0 0x800>;
+				interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		timer14: timer@4882a000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882a000 0x80>;
-			interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer14";
+		ipu1: ipu@58820000 {
+			compatible = "ti,dra7-ipu";
+			reg = <0x58820000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu1>;
 			status = "disabled";
+			resets = <&prm_ipu 0>, <&prm_ipu 1>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			firmware-name = "dra7-ipu1-fw.xem4";
 		};
 
-		timer15: timer@4882c000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882c000 0x80>;
-			interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer15";
+		ipu2: ipu@55020000 {
+			compatible = "ti,dra7-ipu";
+			reg = <0x55020000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu2>;
 			status = "disabled";
-		};
-
-		timer16: timer@4882e000 {
-			compatible = "ti,omap5430-timer";
-			reg = <0x4882e000 0x80>;
-			interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "timer16";
+			resets = <&prm_core 0>, <&prm_core 1>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			firmware-name = "dra7-ipu2-fw.xem4";
+		};
+
+		dsp1: dsp@40800000 {
+			compatible = "ti,dra7-dsp";
+			reg = <0x40800000 0x48000>,
+			      <0x40e00000 0x8000>,
+			      <0x40f00000 0x8000>;
+			reg-names = "l2ram", "l1pram", "l1dram";
+			ti,bootreg = <&scm_conf 0x55c 10>;
+			iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
 			status = "disabled";
-		};
-
-		wdt2: wdt@4ae14000 {
-			compatible = "ti,omap3-wdt";
-			reg = <0x4ae14000 0x80>;
-			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "wd_timer2";
-		};
-
-		hwspinlock: spinlock@4a0f6000 {
-			compatible = "ti,omap4-hwspinlock";
-			reg = <0x4a0f6000 0x1000>;
-			ti,hwmods = "spinlock";
-			#hwlock-cells = <1>;
-		};
-
-		dmm@4e000000 {
-			compatible = "ti,omap5-dmm";
-			reg = <0x4e000000 0x800>;
-			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "dmm";
-		};
-
-		i2c1: i2c@48070000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48070000 0x100>;
-			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&prm_dsp1 0>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			firmware-name = "dra7-dsp1-fw.xe66";
+		};
+
+		target-module@40d01000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d01000 0x4>,
+			      <0x40d01010 0x4>,
+			      <0x40d01014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d01000 0x1000>;
+			#size-cells = <1>;
 			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c1";
-			status = "disabled";
-		};
 
-		i2c2: i2c@48072000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48072000 0x100>;
-			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c2";
-			status = "disabled";
+			mmu0_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x0>;
+			};
 		};
 
-		i2c3: i2c@48060000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x48060000 0x100>;
-			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@40d02000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x40d02000 0x4>,
+			      <0x40d02010 0x4>,
+			      <0x40d02014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp1 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x40d02000 0x1000>;
+			#size-cells = <1>;
 			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c3";
-			status = "disabled";
-		};
 
-		i2c4: i2c@4807a000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807a000 0x100>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c4";
-			status = "disabled";
+			mmu1_dsp1: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp1_system 0x1>;
+			};
 		};
 
-		i2c5: i2c@4807c000 {
-			compatible = "ti,omap4-i2c";
-			reg = <0x4807c000 0x100>;
-			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@58882000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58882000 0x4>,
+			      <0x58882010 0x4>,
+			      <0x58882014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_ipu 2>;
+			reset-names = "rstctrl";
 			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "i2c5";
-			status = "disabled";
-		};
-
-		mmc1: mmc@4809c000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x4809c000 0x400>;
-			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc1";
-			ti,dual-volt;
-			ti,needs-special-reset;
-			dmas = <&sdma 61>, <&sdma 62>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-			pbias-supply = <&pbias_mmc_reg>;
-		};
-
-		mmc2: mmc@480b4000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480b4000 0x400>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc2";
-			ti,needs-special-reset;
-			dmas = <&sdma 47>, <&sdma 48>;
-			dma-names = "tx", "rx";
-			status = "disabled";
-		};
-
-		mmc3: mmc@480ad000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480ad000 0x400>;
-			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc3";
-			ti,needs-special-reset;
-			dmas = <&sdma 77>, <&sdma 78>;
-			dma-names = "tx", "rx";
-			status = "disabled";
+			#size-cells = <1>;
+			ranges = <0x0 0x58882000 0x100>;
+
+			mmu_ipu1: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
-		mmc4: mmc@480d1000 {
-			compatible = "ti,omap4-hsmmc";
-			reg = <0x480d1000 0x400>;
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "mmc4";
-			ti,needs-special-reset;
-			dmas = <&sdma 57>, <&sdma 58>;
-			dma-names = "tx", "rx";
-			status = "disabled";
+		target-module@55082000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x55082000 0x4>,
+			      <0x55082010 0x4>,
+			      <0x55082014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_core 2>;
+			reset-names = "rstctrl";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x55082000 0x100>;
+
+			mmu_ipu2: mmu@0 {
+				compatible = "ti,dra7-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,iommu-bus-err-back;
+			};
 		};
 
 		abb_mpu: regulator-abb-mpu {
@@ -1038,349 +767,92 @@
 			>;
 		};
 
-		mcspi1: spi@48098000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x48098000 0x200>;
-			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi1";
-			ti,spi-num-cs = <4>;
-			dmas = <&sdma 35>,
-			       <&sdma 36>,
-			       <&sdma 37>,
-			       <&sdma 38>,
-			       <&sdma 39>,
-			       <&sdma 40>,
-			       <&sdma 41>,
-			       <&sdma 42>;
-			dma-names = "tx0", "rx0", "tx1", "rx1",
-				    "tx2", "rx2", "tx3", "rx3";
-			status = "disabled";
-		};
-
-		mcspi2: spi@4809a000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x4809a000 0x200>;
-			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi2";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 43>,
-			       <&sdma 44>,
-			       <&sdma 45>,
-			       <&sdma 46>;
-			dma-names = "tx0", "rx0", "tx1", "rx1";
-			status = "disabled";
-		};
-
-		mcspi3: spi@480b8000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480b8000 0x200>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi3";
-			ti,spi-num-cs = <2>;
-			dmas = <&sdma 15>, <&sdma 16>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		mcspi4: spi@480ba000 {
-			compatible = "ti,omap4-mcspi";
-			reg = <0x480ba000 0x200>;
-			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "mcspi4";
-			ti,spi-num-cs = <1>;
-			dmas = <&sdma 70>, <&sdma 71>;
-			dma-names = "tx0", "rx0";
-			status = "disabled";
-		};
-
-		qspi: qspi@4b300000 {
-			compatible = "ti,dra7xxx-qspi";
-			reg = <0x4b300000 0x100>;
-			reg-names = "qspi_base";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			ti,hwmods = "qspi";
-			clocks = <&qspi_gfclk_div>;
+		target-module@4b300000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x4b300000 0x4>,
+			      <0x4b300010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>;
 			clock-names = "fck";
-			num-cs = <4>;
-			interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
-		};
-
-		omap_control_sata: control-phy@4a002374 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002374 0x4>;
-			reg-names = "power";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		/* OCP2SCP3 */
-		ocp2scp@4a090000 {
-			compatible = "ti,omap-ocp2scp";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-			reg = <0x4a090000 0x20>;
-			ti,hwmods = "ocp2scp3";
-			sata_phy: phy@4A096000 {
-				compatible = "ti,phy-pipe3-sata";
-				reg = <0x4A096000 0x80>, /* phy_rx */
-				      <0x4A096400 0x64>, /* phy_tx */
-				      <0x4A096800 0x40>; /* pll_ctrl */
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_sata>;
-				clocks = <&sys_clkin1>, <&sata_ref_clk>;
-				clock-names = "sysclk", "refclk";
-				#phy-cells = <0>;
-			};
-
-			pcie1_phy: pciephy@4a094000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a094000 0x80>, /* phy_rx */
-				      <0x4a094400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie1phy>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy1_32khz>,
-					 <&optfclk_pciephy1_clk>,
-					 <&optfclk_pciephy1_div_clk>,
-					 <&optfclk_pciephy_div>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
-				#phy-cells = <0>;
-			};
-
-			pcie2_phy: pciephy@4a095000 {
-				compatible = "ti,phy-pipe3-pcie";
-				reg = <0x4a095000 0x80>, /* phy_rx */
-				      <0x4a095400 0x64>; /* phy_tx */
-				reg-names = "phy_rx", "phy_tx";
-				ctrl-module = <&omap_control_pcie2phy>;
-				clocks = <&dpll_pcie_ref_ck>,
-					 <&dpll_pcie_ref_m2ldo_ck>,
-					 <&optfclk_pciephy2_32khz>,
-					 <&optfclk_pciephy2_clk>,
-					 <&optfclk_pciephy2_div_clk>,
-					 <&optfclk_pciephy_div>;
-				clock-names = "dpll_ref", "dpll_ref_m2",
-					      "wkupclk", "refclk",
-					      "div-clk", "phy-div";
-				#phy-cells = <0>;
+			ranges = <0x0 0x4b300000 0x1000>,
+				 <0x5c000000 0x5c000000 0x4000000>;
+
+			qspi: spi@0 {
+				compatible = "ti,dra7xxx-qspi";
+				reg = <0 0x100>,
+				      <0x5c000000 0x4000000>;
+				reg-names = "qspi_base", "qspi_mmap";
+				syscon-chipselects = <&scm_conf 0x558>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
+				clock-names = "fck";
+				num-cs = <4>;
+				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};
 		};
 
-		sata: sata@4a141100 {
-			compatible = "snps,dwc-ahci";
-			reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
-			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			clocks = <&sata_ref_clk>;
-			ti,hwmods = "sata";
-		};
-
-		omap_control_pcie1phy: control-phy@0x4a003c40 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-		};
-
-		omap_control_pcie2phy: control-pcie@0x4a003c44 {
-			compatible = "ti,control-phy-pcie";
-			reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
-			reg-names = "power", "control_sma", "pcie_pcs";
-			clocks = <&sys_clkin1>;
-			clock-names = "sysclk";
-			status = "disabled";
-		};
-
-		rtc: rtc@48838000 {
-			compatible = "ti,am3352-rtc";
-			reg = <0x48838000 0x100>;
-			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "rtcss";
-			clocks = <&sys_32k_ck>;
-		};
-
-		omap_control_usb2phy1: control-phy@4a002300 {
-			compatible = "ti,control-phy-usb2";
-			reg = <0x4a002300 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb3phy1: control-phy@4a002370 {
-			compatible = "ti,control-phy-pipe3";
-			reg = <0x4a002370 0x4>;
-			reg-names = "power";
-		};
-
-		omap_control_usb2phy2: control-phy@0x4a002e74 {
-			compatible = "ti,control-phy-usb2-dra7";
-			reg = <0x4a002e74 0x4>;
-			reg-names = "power";
-		};
-
 		/* OCP2SCP1 */
-		ocp2scp@4a080000 {
-			compatible = "ti,omap-ocp2scp";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = <0x4a080000 0x20>;
-			ti,hwmods = "ocp2scp1";
-
-			usb2_phy1: phy@4a084000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a084000 0x400>;
-				ctrl-module = <&omap_control_usb2phy1>;
-				clocks = <&usb_phy1_always_on_clk32k>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb2_phy2: phy@4a085000 {
-				compatible = "ti,omap-usb2";
-				reg = <0x4a085000 0x400>;
-				ctrl-module = <&omap_control_usb2phy2>;
-				clocks = <&usb_phy2_always_on_clk32k>,
-					 <&usb_otg_ss2_refclk960m>;
-				clock-names =	"wkupclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-
-			usb3_phy1: phy@4a084400 {
-				compatible = "ti,omap-usb3";
-				reg = <0x4a084400 0x80>,
-				      <0x4a084800 0x64>,
-				      <0x4a084c00 0x40>;
-				reg-names = "phy_rx", "phy_tx", "pll_ctrl";
-				ctrl-module = <&omap_control_usb3phy1>;
-				clocks = <&usb_phy3_always_on_clk32k>,
-					 <&sys_clkin1>,
-					 <&usb_otg_ss1_refclk960m>;
-				clock-names =	"wkupclk",
-						"sysclk",
-						"refclk";
-				#phy-cells = <0>;
-			};
-		};
+		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
 
-		omap_dwc3_1: omap_dwc3_1@48880000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss1";
-			reg = <0x48880000 0x10000>;
-			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@50000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x50000000 4>,
+			      <0x50000010 4>,
+			      <0x50000014 4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb1: usb@48890000 {
-				compatible = "snps,dwc3";
-				reg = <0x48890000 0x17000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy1>, <&usb3_phy1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
-				maximum-speed = "super-speed";
-				dr_mode = "otg";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
+			ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
+				 <0x00000000 0x00000000 0x40000000>; /* data */
+
+			gpmc: gpmc@50000000 {
+				compatible = "ti,am3352-gpmc";
+				reg = <0x50000000 0x37c>;      /* device IO registers */
+				interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 4 0>;
+				dma-names = "rxtx";
+				gpmc,num-cs = <8>;
+				gpmc,num-waitpins = <2>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				status = "disabled";
 			};
 		};
 
-		omap_dwc3_2: omap_dwc3_2@488c0000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss2";
-			reg = <0x488c0000 0x10000>;
-			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+		target-module@56000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5600fe00 0x4>,
+			      <0x5600fe10 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			usb2: usb@488d0000 {
-				compatible = "snps,dwc3";
-				reg = <0x488d0000 0x17000>;
-				interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&usb2_phy2>;
-				phy-names = "usb2-phy";
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
-		omap_dwc3_3: omap_dwc3_3@48900000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss3";
-			reg = <0x48900000 0x10000>;
-			interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb3: usb@48910000 {
-				compatible = "snps,dwc3";
-				reg = <0x48910000 0x17000>;
-				interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
-				snps,dis_u3_susphy_quirk;
-				snps,dis_u2_susphy_quirk;
-			};
-		};
-
-		elm: elm@48078000 {
-			compatible = "ti,am3352-elm";
-			reg = <0x48078000 0xfc0>;      /* device IO registers */
-			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
-			ti,hwmods = "elm";
-			status = "disabled";
-		};
-
-		gpmc: gpmc@50000000 {
-			compatible = "ti,am3352-gpmc";
-			ti,hwmods = "gpmc";
-			reg = <0x50000000 0x37c>;      /* device IO registers */
-			interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-			gpmc,num-cs = <8>;
-			gpmc,num-waitpins = <2>;
-			#address-cells = <2>;
-			#size-cells = <1>;
-			status = "disabled";
-		};
-
-		atl: atl@4843c000 {
-			compatible = "ti,dra7-atl";
-			reg = <0x4843c000 0x3ff>;
-			ti,hwmods = "atl";
-			ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
-					     <&atl_clkin2_ck>, <&atl_clkin3_ck>;
-			clocks = <&atl_gfclk_mux>;
-			clock-names = "fck";
-			status = "disabled";
+			ranges = <0 0x56000000 0x2000000>;
 		};
 
 		crossbar_mpu: crossbar@4a002a48 {
@@ -1397,133 +869,490 @@
 			ti,irqs-safe-map = <0>;
 		};
 
-		mac: ethernet@4a100000 {
-			compatible = "ti,cpsw";
-			ti,hwmods = "gmac";
-			clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
-			clock-names = "fck", "cpts";
-			cpdma_channels = <8>;
-			ale_entries = <1024>;
-			bd_ram_size = <0x2000>;
-			no_bd_ram = <0>;
-			rx_descs = <64>;
-			mac_control = <0x20>;
-			slaves = <2>;
-			active_slave = <0>;
-			cpts_clock_mult = <0x80000000>;
-			cpts_clock_shift = <29>;
-			reg = <0x48484000 0x1000
-			       0x48485200 0x2E00>;
+		target-module@58000000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x58000000 4>,
+			      <0x58000014 4>;
+			reg-names = "rev", "syss";
+			ti,syss-mask = <1>;
+			clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
+				 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
+			clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			/*
-			 * rx_thresh_pend
-			 * rx_pend
-			 * tx_pend
-			 * misc_pend
-			 */
-			interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
-			ranges;
-			status = "disabled";
+			ranges = <0 0x58000000 0x800000>;
 
-			davinci_mdio: mdio@48485000 {
-				compatible = "ti,davinci_mdio";
+			dss: dss@0 {
+				compatible = "ti,dra7-dss";
+				/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
+				/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
+				status = "disabled";
+				/* CTRL_CORE_DSS_PLL_CONTROL */
+				syscon-pll-ctrl = <&scm_conf 0x538>;
 				#address-cells = <1>;
-				#size-cells = <0>;
-				ti,hwmods = "davinci_mdio";
-				bus_freq = <1000000>;
-				reg = <0x48485000 0x100>;
-			};
+				#size-cells = <1>;
+				ranges = <0 0 0x800000>;
+
+				target-module@1000 {
+					compatible = "ti,sysc-omap2", "ti,sysc";
+					reg = <0x1000 0x4>,
+					      <0x1010 0x4>,
+					      <0x1014 0x4>;
+					reg-names = "rev", "sysc", "syss";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-midle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>;
+					ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+							 SYSC_OMAP2_ENAWAKEUP |
+							 SYSC_OMAP2_SOFTRESET |
+							 SYSC_OMAP2_AUTOIDLE)>;
+					ti,syss-mask = <1>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x1000 0x1000>;
+
+					dispc@0 {
+						compatible = "ti,dra7-dispc";
+						reg = <0 0x1000>;
+						interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+						clock-names = "fck";
+						/* CTRL_CORE_SMA_SW_1 */
+						syscon-pol = <&scm_conf 0x534>;
+					};
+				};
 
-			cpsw_emac0: slave@48480200 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
+				target-module@40000 {
+					compatible = "ti,sysc-omap4", "ti,sysc";
+					reg = <0x40000 0x4>,
+					      <0x40010 0x4>;
+					reg-names = "rev", "sysc";
+					ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+							<SYSC_IDLE_NO>,
+							<SYSC_IDLE_SMART>,
+							<SYSC_IDLE_SMART_WKUP>;
+					ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
+					clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+						 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
+					clock-names = "fck", "dss_clk";
+					#address-cells = <1>;
+					#size-cells = <1>;
+					ranges = <0 0x40000 0x40000>;
+
+					hdmi: encoder@0 {
+						compatible = "ti,dra7-hdmi";
+						reg = <0 0x200>,
+						      <0x200 0x80>,
+						      <0x300 0x80>,
+						      <0x20000 0x19000>;
+						reg-names = "wp", "pll", "phy", "core";
+						interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+						status = "disabled";
+						clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
+							 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
+						clock-names = "fck", "sys_clk";
+						dmas = <&sdma_xbar 76>;
+						dma-names = "audio_tx";
+					};
+				};
 			};
+		};
 
-			cpsw_emac1: slave@48480300 {
-				/* Filled in by U-Boot */
-				mac-address = [ 00 00 00 00 00 00 ];
+		target-module@59000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x59000020 0x4>;
+			reg-names = "rev";
+			clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x59000000 0x1000>;
+
+			bb2d: gpu@0 {
+				compatible = "vivante,gc";
+				reg = <0x0 0x700>;
+				interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
+				clock-names = "core";
 			};
+		};
 
-			phy_sel: cpsw-phy-sel@4a002554 {
-				compatible = "ti,dra7xx-cpsw-phy-sel";
-				reg= <0x4a002554 0x4>;
-				reg-names = "gmii-sel";
+		aes1_target: target-module@4b500000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b500080 0x4>,
+			      <0x4b500084 0x4>,
+			      <0x4b500088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b500000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
 			};
 		};
 
-		dcan1: can@481cc000 {
-			compatible = "ti,dra7-d_can";
-			ti,hwmods = "dcan1";
-			reg = <0x4ae3c000 0x2000>;
-			syscon-raminit = <&scm_conf 0x558 0>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&dcan1_sys_clk_mux>;
-			status = "disabled";
+		aes2_target: target-module@4b700000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b700080 0x4>,
+			      <0x4b700084 0x4>,
+			      <0x4b700088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b700000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
+				dma-names = "tx", "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
-		dcan2: can@481d0000 {
-			compatible = "ti,dra7-d_can";
-			ti,hwmods = "dcan2";
-			reg = <0x48480000 0x2000>;
-			syscon-raminit = <&scm_conf 0x558 1>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sys_clkin1>;
-			status = "disabled";
+		sham1_target: target-module@4b101000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b101100 0x4>,
+			      <0x4b101110 0x4>,
+			      <0x4b101114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b101000 0x1000>;
+
+			sham1: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 119 0>;
+				dma-names = "rx";
+				clocks = <&l3_iclk_div>;
+				clock-names = "fck";
+			};
 		};
 
-		dss: dss@58000000 {
-			compatible = "ti,dra7-dss";
-			/* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
-			/* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
-			status = "disabled";
-			ti,hwmods = "dss_core";
-			/* CTRL_CORE_DSS_PLL_CONTROL */
-			syscon-pll-ctrl = <&scm_conf 0x538>;
+		sham2_target: target-module@42701000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x42701100 0x4>,
+			      <0x42701110 0x4>,
+			      <0x42701114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>;
+			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
-
-			dispc@58001000 {
-				compatible = "ti,dra7-dispc";
-				reg = <0x58001000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				ti,hwmods = "dss_dispc";
-				clocks = <&dss_dss_clk>;
+			ranges = <0x0 0x42701000 0x1000>;
+
+			sham2: sham@0 {
+				compatible = "ti,omap5-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&edma_xbar 165 0>;
+				dma-names = "rx";
+				clocks = <&l3_iclk_div>;
 				clock-names = "fck";
-				/* CTRL_CORE_SMA_SW_1 */
-				syscon-pol = <&scm_conf 0x534>;
 			};
+		};
 
-			hdmi: encoder@58060000 {
-				compatible = "ti,dra7-hdmi";
-				reg = <0x58040000 0x200>,
-				      <0x58040200 0x80>,
-				      <0x58040300 0x80>,
-				      <0x58060000 0x19000>;
-				reg-names = "wp", "pll", "phy", "core";
-				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-				status = "disabled";
-				ti,hwmods = "dss_hdmi";
-				clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
-				clock-names = "fck", "sys_clk";
+		iva_hd_target: target-module@5a000000 {
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x5a05a400 0x4>,
+			      <0x5a05a410 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			power-domains = <&prm_iva>;
+			resets = <&prm_iva 2>;
+			reset-names = "rstctrl";
+			clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x5a000000 0x5a000000 0x1000000>,
+				 <0x5b000000 0x5b000000 0x1000000>;
+
+			iva {
+				compatible = "ti,ivahd";
 			};
 		};
+
+		opp_supply_mpu: opp-supply@4a003b20 {
+			compatible = "ti,omap5-opp-supply";
+			reg = <0x4a003b20 0xc>;
+			ti,efuse-settings = <
+			/* uV   offset */
+			1060000 0x0
+			1160000 0x4
+			1210000 0x8
+			>;
+			ti,absolute-max-voltage-uv = <1500000>;
+		};
+
 	};
 
 	thermal_zones: thermal-zones {
 		#include "omap4-cpu-thermal.dtsi"
 		#include "omap5-gpu-thermal.dtsi"
 		#include "omap5-core-thermal.dtsi"
+		#include "dra7-dspeve-thermal.dtsi"
+		#include "dra7-iva-thermal.dtsi"
 	};
 
 };
 
 &cpu_thermal {
 	polling-delay = <500>; /* milliseconds */
+	coefficients = <0 2000>;
+};
+
+&gpu_thermal {
+	coefficients = <0 2000>;
+};
+
+&core_thermal {
+	coefficients = <0 2000>;
 };
 
-/include/ "dra7xx-clocks.dtsi"
+&dspeve_thermal {
+	coefficients = <0 2000>;
+};
+
+&iva_thermal {
+	coefficients = <0 2000>;
+};
+
+&cpu_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&core_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&gpu_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&dspeve_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+&iva_crit {
+	temperature = <120000>; /* milli Celsius */
+};
+
+#include "dra7-l4.dtsi"
+#include "dra7xx-clocks.dtsi"
+
+&prm {
+	prm_mpu: prm@300 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x300 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_dsp1: prm@400 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x400 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_ipu: prm@500 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x500 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_coreaon: prm@628 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x628 0xd8>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_core: prm@700 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x700 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_iva: prm@f00 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0xf00 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_cam: prm@1000 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1000 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_dss: prm@1100 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1100 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_gpu: prm@1200 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1200 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_l3init: prm@1300 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1300 0x100>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_l4per: prm@1400 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1400 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_custefuse: prm@1600 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1600 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_wkupaon: prm@1724 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1724 0x100>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_dsp2: prm@1b00 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b00 0x40>;
+		#reset-cells = <1>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_eve1: prm@1b40 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b40 0x40>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_eve2: prm@1b80 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1b80 0x40>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_eve3: prm@1bc0 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1bc0 0x40>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_eve4: prm@1c00 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1c00 0x60>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_rtc: prm@1c60 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1c60 0x20>;
+		#power-domain-cells = <0>;
+	};
+
+	prm_vpe: prm@1c80 {
+		compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
+		reg = <0x1c80 0x80>;
+		#power-domain-cells = <0>;
+	};
+};
+
+/* Preferred always-on timer for clockevent */
+&timer1_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
+		assigned-clock-parents = <&sys_32k_ck>;
+	};
+};
+
+/* Local timers, see ARM architected timer wrap erratum i940 */
+&timer15_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
+
+&timer16_target {
+	ti,no-reset-on-init;
+	ti,no-idle;
+	timer@0 {
+		assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
+		assigned-clock-parents = <&timer_sys_clk_div>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
new file mode 100644
index 000000000000..a64364443031
--- /dev/null
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra71x.dtsi"
+#include "dra7-mmc-iodelay.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	compatible = "ti,dra718-evm", "ti,dra718", "ti,dra722", "ti,dra72", "ti,dra7";
+	model = "TI DRA718 EVM";
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vddshv8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&evm_5v0>;
+
+		gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0
+			  3300000 0x1>;
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&lp8732_buck0_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	poweroff: gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
+		input;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	lp8733: lp8733@60 {
+		compatible = "ti,lp8733";
+		reg = <0x60>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&evm_5v0>;
+		ldo1-in-supply =<&evm_5v0>;
+
+		lp8733_regulators: regulators {
+			lp8733_buck0_reg: buck0 {
+				/* FB_B0 -> LP8733-BUCK1 - VPO_S1_AVS - VDD_CORE_AVS (core, mpu, gpu) */
+				regulator-name = "lp8733-buck0";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8733_buck1_reg: buck1 {
+				/* FB_B1 -> LP8733-BUCK2 - VPO_S2_AVS - VDD_DSP_AVS (DSP/eve/iva) */
+				regulator-name = "lp8733-buck1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8733_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8733-LDO1 - VPO_L1_3V3 - VDDSHV8 (optional) */
+				regulator-name = "lp8733-ldo0";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8733_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8733-LDO2 - VPO_L2_3V3 - VDDA_USB3V3 */
+				regulator-name = "lp8733-ldo1";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	lp8732: lp8732@61 {
+		compatible = "ti,lp8732";
+		reg = <0x61>;
+
+		buck0-in-supply =<&vsys_3v3>;
+		buck1-in-supply =<&vsys_3v3>;
+		ldo0-in-supply =<&vsys_3v3>;
+		ldo1-in-supply =<&vsys_3v3>;
+
+		lp8732_regulators: regulators {
+			lp8732_buck0_reg: buck0 {
+				/* FB_B0 -> LP8732-BUCK1 - VPO_S3_1V8 - VDDS_1V8 */
+				regulator-name = "lp8732-buck0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			lp8732_buck1_reg: buck1 {
+				/* FB_B1 -> LP8732-BUCK2 - VPO_S4_DDR - VDD_DDR_1V35 */
+				regulator-name = "lp8732-buck1";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo0_reg: ldo0 {
+				/* LDO0 -> LP8732-LDO1 - VPO_L3_1V8 - VDA_1V8_PLL */
+				regulator-name = "lp8732-ldo0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			lp8732_ldo1_reg: ldo1 {
+				/* LDO1 -> LP8732-LDO2 - VPO_L4_1V8 - VDA_1V8_PHY */
+				regulator-name = "lp8732-ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&pcf_lcd {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio7>;
+	interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pcf_hdmi {
+	hdmi-i2c-disable-hog {
+		/*
+		 * PM_OEn to High: Disable routing I2C3 to PM_I2C
+		 * With this PM_SEL(p3) should not matter
+		 */
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_LOW>;
+		output-high;
+		line-name = "pm_oe_n";
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+	vqmmc-supply = <&vpo_sd_1v8_3v3>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+	vqmmc-supply = <&evm_1v8_sw>;
+};
+
+&mac_sw {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+/* No Sata on this device */
+&sata_phy {
+	status = "disabled";
+};
+
+&sata {
+	status = "disabled";
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&usb2_phy1 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&lp8733_ldo1_reg>;
+};
+
+&dss {
+	/* Supplied by VDA_1V8_PLL */
+	vdda_video-supply = <&lp8732_ldo0_reg>;
+};
+
+&hdmi {
+	/* Supplied by VDA_1V8_PHY */
+	vdda_video-supply = <&lp8732_ldo1_reg>;
+};
+
+&extcon_usb1 {
+	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
diff --git a/arch/arm/boot/dts/dra71x.dtsi b/arch/arm/boot/dts/dra71x.dtsi
new file mode 100644
index 000000000000..9c270d8f75d5
--- /dev/null
+++ b/arch/arm/boot/dts/dra71x.dtsi
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra72-evm-common.dtsi"
+
+&rtctarget {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
new file mode 100644
index 000000000000..c79ba671ec2b
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -0,0 +1,593 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra72x.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/ti-dra7-atl.h>
+
+/ {
+	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
+
+	aliases {
+		display0 = &hdmi0;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	evm_12v0: fixedregulator-evm12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_5v0: fixedregulator-evm5v0 {
+		/* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 1 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_3v6: fixedregulator-evm_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&evm_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
+		/* Output 2 of LM5140QRWGTQ1 on dra71-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	evm_3v3_sw: fixedregulator-evm_3v3 {
+		/* TPS22965DSG */
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&evm_3v3_sw>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	evm_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&evm_3v3_sw>;
+		enable-active-high;
+		gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	extcon_usb2: extcon_usb2 {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
+			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	sound0: sound0 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "DRA7xx-EVM";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack",       "HPLOUT",
+			"Headphone Jack",       "HPROUT",
+			"Line Out",		"LLOUT",
+			"Line Out",		"RLOUT",
+			"MIC3L",		"Mic Jack",
+			"MIC3R",		"Mic Jack",
+			"Mic Jack",		"Mic Bias",
+			"LINE1L",               "Line In",
+			"LINE1R",               "Line In";
+		simple-audio-card,format = "dsp_b";
+		simple-audio-card,bitclock-master = <&sound0_master>;
+		simple-audio-card,frame-master = <&sound0_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound0_master: simple-audio-card,cpu {
+			sound-dai = <&mcasp3>;
+			system-clock-frequency = <5644800>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&atl_clkin2_ck>;
+		};
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	clk_ov5640_fixed: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+};
+
+&dra7_pmx_core {
+	dcan1_pins_default: dcan1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
+			DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
+		>;
+	};
+
+	dcan1_pins_sleep: dcan1_pins_sleep {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
+			DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP)	/* wakeup0.off */
+		>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_lcd: gpio@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_gpio_21: gpio@21 {
+		compatible = "nxp,pcf8575";
+		reg = <0x21>;
+		lines-initial-states = <0x1408>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&evm_3v3_sw>;
+		IOVDD-supply = <&evm_3v3_sw>;
+		DRVDD-supply = <&evm_3v3_sw>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		/*
+		 * initial state is used here to keep the mdio interface
+		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
+		 * VIN2_S0 driven high otherwise Ethernet stops working
+		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
+		 */
+		lines-initial-states = <0x0f2b>;
+
+		hdmi-audio-hog {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+};
+
+&uart1 {
+	status = "okay";
+	interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			      <&dra7_pmx_core 0x3e0>;
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	/*
+	 * For the existing IOdelay configuration via U-Boot we don't
+	 * support NAND on dra72-evm. Keep it disabled. Enabling it
+	 * requires a different configuration by U-Boot.
+	 */
+	status = "disabled";
+	ranges = <0 0 0x08000000 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		/* To use NAND, DIP switch SW5 must be set like so:
+		 * SW5.1 (NAND_SELn) = ON (LOW)
+		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
+		 */
+		compatible = "ti,omap2-nand";
+		reg = <0 0 4>;		/* device IO registers */
+		interrupt-parent = <&gpmc>;
+		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+			     <1 IRQ_TYPE_NONE>;	/* termcount */
+		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
+		ti,nand-xfer-type = "prefetch-dma";
+		ti,nand-ecc-opt = "bch8";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <16>;
+		gpmc,device-width = <2>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <80>;
+		gpmc,cs-wr-off-ns = <80>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <60>;
+		gpmc,adv-wr-off-ns = <60>;
+		gpmc,we-on-ns = <10>;
+		gpmc,we-off-ns = <50>;
+		gpmc,oe-on-ns = <4>;
+		gpmc,oe-off-ns = <40>;
+		gpmc,access-ns = <40>;
+		gpmc,wr-access-ns = <80>;
+		gpmc,rd-cycle-ns = <80>;
+		gpmc,wr-cycle-ns = <80>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00020000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00020000 0x00020000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00040000 0x00020000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x00060000 0x00020000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x000c0000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x001c0000 0x00020000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x001e0000 0x00020000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00200000 0x00800000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x0f600000>;
+		};
+	};
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+	extcon = <&extcon_usb2>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	dr_mode = "host";
+	extcon = <&extcon_usb2>;
+};
+
+&mmc1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+	vmmc-supply = <&evm_3v3_sd>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is a viable alternative
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	max-frequency = <192000000>;
+};
+
+&mmc2 {
+	/* SW5-3 in ON position */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <192000000>;
+};
+
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&evm_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25";
+	pinctrl-0 = <&mmc4_pins_default>;
+	pinctrl-1 = <&mmc4_pins_default>;
+	pinctrl-2 = <&mmc4_pins_default>;
+	pinctrl-3 = <&mmc4_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wifi@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&dcan1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep", "active";
+	pinctrl-0 = <&dcan1_pins_sleep>;
+	pinctrl-1 = <&dcan1_pins_sleep>;
+	pinctrl-2 = <&dcan1_pins_default>;
+};
+
+&qspi {
+	status = "okay";
+
+	spi-max-frequency = <76800000>;
+	flash@0 {
+		compatible = "s25fl256s1";
+		spi-max-frequency = <76800000>;
+		reg = <0>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* MTD partition table.
+		 * The ROM checks the first four physical blocks
+		 * for a valid file to boot and the flash here is
+		 * 64KiB block size.
+		 */
+		partition@0 {
+			label = "QSPI.SPL";
+			reg = <0x00000000 0x00010000>;
+		};
+		partition@1 {
+			label = "QSPI.SPL.backup1";
+			reg = <0x00010000 0x00010000>;
+		};
+		partition@2 {
+			label = "QSPI.SPL.backup2";
+			reg = <0x00020000 0x00010000>;
+		};
+		partition@3 {
+			label = "QSPI.SPL.backup3";
+			reg = <0x00030000 0x00010000>;
+		};
+		partition@4 {
+			label = "QSPI.u-boot";
+			reg = <0x00040000 0x00100000>;
+		};
+		partition@5 {
+			label = "QSPI.u-boot-spl-os";
+			reg = <0x00140000 0x00080000>;
+		};
+		partition@6 {
+			label = "QSPI.u-boot-env";
+			reg = <0x001c0000 0x00010000>;
+		};
+		partition@7 {
+			label = "QSPI.u-boot-env.backup1";
+			reg = <0x001d0000 0x0010000>;
+		};
+		partition@8 {
+			label = "QSPI.kernel";
+			reg = <0x001e0000 0x0800000>;
+		};
+		partition@9 {
+			label = "QSPI.file-system";
+			reg = <0x009e0000 0x01620000>;
+		};
+	};
+};
+
+&dss {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&atl {
+	assigned-clocks = <&abe_dpll_sys_clk_mux>,
+			  <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
+			  <&dpll_abe_ck>,
+			  <&dpll_abe_m2x2_ck>,
+			  <&atl_clkin2_ck>;
+	assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
+	assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
+
+	status = "okay";
+
+	atl2 {
+		bws = <DRA7_ATL_WS_MCASP2_FSX>;
+		aws = <DRA7_ATL_WS_MCASP3_FSX>;
+	};
+};
+
+&mcasp3 {
+	#sound-dai-cells = <0>;
+
+	assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+	assigned-clock-parents = <&atl_clkin2_ck>;
+
+	status = "okay";
+
+	op-mode = <0>;          /* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	/* 4 serializer */
+	serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+		1 2 0 0
+	>;
+	tx-num-evt = <32>;
+	rx-num-evt = <32>;
+};
+
+&pcie1_rc {
+	status = "okay";
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
new file mode 100644
index 000000000000..f242b937f88c
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -0,0 +1,157 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA722 Rev C EVM";
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_cma_pool: ipu2_cma@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_cma_pool: dsp1_cma@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_cma_pool: ipu1_cma@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&i2c1 {
+	tps65917: tps65917@58 {
+		reg = <0x58>;
+
+		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
+	};
+};
+
+#include "dra72-evm-tps65917.dtsi"
+
+&ldo2_reg {
+	/* LDO2_OUT --> VDDA_1V8_PHY2 */
+	regulator-always-on;
+	regulator-boot-on;
+};
+
+&hdmi {
+	vdda-supply = <&ldo2_reg>;
+};
+
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio3>;
+	interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&mac_sw {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
+		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+		     <&pcf_hdmi 10 GPIO_ACTIVE_LOW>;	/* P12 */
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&mmc1 {
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev20 &mmc1_iodelay_ddr50_conf>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev20_conf>;
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&mmc2 {
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_cma_pool>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm-tps65917.dtsi b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
new file mode 100644
index 000000000000..7b433f549239
--- /dev/null
+++ b/arch/arm/boot/dts/dra72-evm-tps65917.dtsi
@@ -0,0 +1,151 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * Integrated Power Management Chip
+ * https://www.ti.com/lit/ds/symlink/tps65917-q1.pdf
+ */
+
+&tps65917 {
+	compatible = "ti,tps65917";
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	ti,system-power-controller;
+
+	tps65917_pmic {
+		compatible = "ti,tps65917-pmic";
+
+		smps1-in-supply = <&vsys_3v3>;
+		smps2-in-supply = <&vsys_3v3>;
+		smps3-in-supply = <&vsys_3v3>;
+		smps4-in-supply = <&vsys_3v3>;
+		smps5-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
+		ldo2-in-supply = <&vsys_3v3>;
+		ldo3-in-supply = <&vsys_3v3>;
+		ldo4-in-supply = <&evm_5v0>;
+		ldo5-in-supply = <&vsys_3v3>;
+
+		tps65917_regulators: regulators {
+			smps1_reg: smps1 {
+				/* VDD_MPU */
+				regulator-name = "smps1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps2_reg: smps2 {
+				/* VDD_CORE */
+				regulator-name = "smps2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps3_reg: smps3 {
+				/* VDD_GPU IVA DSPEVE */
+				regulator-name = "smps3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			smps4_reg: smps4 {
+				/* VDDS1V8 */
+				regulator-name = "smps4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			smps5_reg: smps5 {
+				/* VDD_DDR */
+				regulator-name = "smps5";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				/* LDO1_OUT --> SDIO  */
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-allow-bypass;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-allow-bypass;
+			};
+
+			ldo3_reg: ldo3 {
+				/* VDDA_1V8_PHY */
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				/* VDDA_1V8_PLL */
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				/* VDDA_3V_USB: VDDA_USBHS33 */
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	tps65917_power_button {
+		compatible = "ti,palmas-pwrbutton";
+		interrupt-parent = <&tps65917>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		wakeup-source;
+		ti,palmas-long-press-seconds = <6>;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo4_reg>;
+};
+
+&dss {
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&mmc1 {
+	vqmmc-supply = <&ldo1_reg>;
+};
+
+&cpu0 {
+	vdd-supply = <&smps1_reg>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4e1b60581782..5f62f92eb96c 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -1,678 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
  */
-/dts-v1/;
-
-#include "dra72x.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-
+#include "dra72-evm-common.dtsi"
+#include "dra72x-mmc-iodelay.dtsi"
 / {
 	model = "TI DRA722";
-	compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
 
-	memory {
+	memory@0 {
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1024 MB */
-	};
-
-	aliases {
-		display0 = &hdmi0;
-	};
-
-	evm_3v3: fixedregulator-evm_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "evm_3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
 
-	extcon_usb2: extcon_usb2 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
-	};
-
-	hdmi0: connector {
-		compatible = "hdmi-connector";
-		label = "hdmi";
-
-		type = "a";
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
 
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&tpd12s015_out>;
-			};
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
 		};
-	};
-
-	tpd12s015: encoder {
-		compatible = "ti,tpd12s015";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&tpd12s015_pins>;
-
-		gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>,	/* P4, CT CP HPD */
-			<&pcf_hdmi 5 GPIO_ACTIVE_HIGH>,	/* P5, LS OE */
-			<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
 
-				tpd12s015_in: endpoint {
-					remote-endpoint = <&hdmi_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				tpd12s015_out: endpoint {
-					remote-endpoint = <&hdmi_connector_in>;
-				};
-			};
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
 		};
-	};
-};
 
-&dra7_pmx_core {
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
-			0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
-		>;
-	};
-
-	i2c5_pins: pinmux_i2c5_pins {
-		pinctrl-single,pins = <
-			0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */
-			0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */
-		>;
-	};
-
-	nand_default: nand_default {
-		pinctrl-single,pins = <
-			0x0	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad0 */
-			0x4	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad1 */
-			0x8	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad2 */
-			0xc	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad3 */
-			0x10	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad4 */
-			0x14	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad5 */
-			0x18	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad6 */
-			0x1c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad7 */
-			0x20	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad8 */
-			0x24	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad9 */
-			0x28	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad10 */
-			0x2c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad11 */
-			0x30	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad12 */
-			0x34	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad13 */
-			0x38	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad14 */
-			0x3c	(PIN_INPUT  | MUX_MODE0) /* gpmc_ad15 */
-			0xb4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
-			0xc4	(PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
-			0xcc	(PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
-			0xc8	(PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
-			0xd0	(PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
-			0xd8	(PIN_INPUT  | MUX_MODE0) /* gpmc_wait0 */
-		>;
-	};
-
-	usb1_pins: pinmux_usb1_pins {
-		pinctrl-single,pins = <
-			0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
-		>;
-	};
-
-	usb2_pins: pinmux_usb2_pins {
-		pinctrl-single,pins = <
-			0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
-		>;
-	};
-
-	tps65917_pins_default: tps65917_pins_default {
-		pinctrl-single,pins = <
-			0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
-		>;
-	};
-
-	mmc1_pins_default: mmc1_pins_default {
-		pinctrl-single,pins = <
-			0x36c (PIN_INPUT | MUX_MODE14)	/* mmc1sdcd.gpio219 */
-			0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
-			0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
-			0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
-			0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
-			0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
-			0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
-		>;
-	};
-
-	mmc2_pins_default: mmc2_pins_default {
-		pinctrl-single,pins = <
-			0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
-			0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
-			0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
-			0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
-			0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
-			0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
-			0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
-			0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
-			0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
-			0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
-		>;
-	};
-
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			0x3d0   (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
-			0x418   (PULL_UP | MUX_MODE1)	/* wakeup0.dcan1_rx */
-		>;
-	};
-
-	dcan1_pins_sleep: dcan1_pins_sleep {
-		pinctrl-single,pins = <
-			0x3d0   (MUX_MODE15 | PULL_UP)	/* dcan1_tx.off */
-			0x418   (MUX_MODE15 | PULL_UP)	/* wakeup0.off */
-		>;
-	};
-
-	qspi1_pins: pinmux_qspi1_pins {
-		pinctrl-single,pins = <
-			0x74 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_a13.qspi1_rtclk */
-			0x78 (PIN_INPUT | MUX_MODE1)	/* gpmc_a14.qspi1_d3 */
-			0x7c (PIN_INPUT | MUX_MODE1)	/* gpmc_a15.qspi1_d2 */
-			0x80 (PIN_INPUT | MUX_MODE1)	/* gpmc_a16.qspi1_d1 */
-			0x84 (PIN_INPUT | MUX_MODE1)	/* gpmc_a17.qspi1_d0 */
-			0x88 (PIN_OUTPUT | MUX_MODE1)	/* qpmc_a18.qspi1_sclk */
-			0xb8 (PIN_OUTPUT | MUX_MODE1)	/* gpmc_cs2.qspi1_cs0 */
-		>;
-	};
-
-	hdmi_pins: pinmux_hdmi_pins {
-		pinctrl-single,pins = <
-			0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
-			0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
-		>;
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
 	};
 
-	tpd12s015_pins: pinmux_tpd12s015_pins {
-		pinctrl-single,pins = <
-			0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
-		>;
+	evm_1v8_sw: fixedregulator-evm_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "evm_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps4_reg>;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 };
 
 &i2c1 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-	clock-frequency = <400000>;
-
 	tps65917: tps65917@58 {
-		compatible = "ti,tps65917";
 		reg = <0x58>;
 
-		pinctrl-names = "default";
-		pinctrl-0 = <&tps65917_pins_default>;
-
 		interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>;  /* IRQ_SYS_1N */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		ti,system-power-controller;
-
-		tps65917_pmic {
-			compatible = "ti,tps65917-pmic";
-
-			regulators {
-				smps1_reg: smps1 {
-					/* VDD_MPU */
-					regulator-name = "smps1";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps2_reg: smps2 {
-					/* VDD_CORE */
-					regulator-name = "smps2";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1060000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps3_reg: smps3 {
-					/* VDD_GPU IVA DSPEVE */
-					regulator-name = "smps3";
-					regulator-min-microvolt = <850000>;
-					regulator-max-microvolt = <1250000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				smps4_reg: smps4 {
-					/* VDDS1V8 */
-					regulator-name = "smps4";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				smps5_reg: smps5 {
-					/* VDD_DDR */
-					regulator-name = "smps5";
-					regulator-min-microvolt = <1350000>;
-					regulator-max-microvolt = <1350000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo1_reg: ldo1 {
-					/* LDO1_OUT --> SDIO  */
-					regulator-name = "ldo1";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-
-				ldo2_reg: ldo2 {
-					/* LDO2_OUT --> TP1017 (UNUSED)  */
-					regulator-name = "ldo2";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo3_reg: ldo3 {
-					/* VDDA_1V8_PHY */
-					regulator-name = "ldo3";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo5_reg: ldo5 {
-					/* VDDA_1V8_PLL */
-					regulator-name = "ldo5";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					regulator-boot-on;
-				};
-
-				ldo4_reg: ldo4 {
-					/* VDDA_3V_USB: VDDA_USBHS33 */
-					regulator-name = "ldo4";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-boot-on;
-				};
-			};
-		};
-
-		tps65917_power_button {
-			compatible = "ti,palmas-pwrbutton";
-			interrupt-parent = <&tps65917>;
-			interrupts = <1 IRQ_TYPE_NONE>;
-			wakeup-source;
-			ti,palmas-long-press-seconds = <6>;
-		};
-	};
-
-	pcf_gpio_21: gpio@21 {
-		compatible = "ti,pcf8575";
-		reg = <0x21>;
-		lines-initial-states = <0x1408>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
 	};
 };
 
-&i2c5 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins>;
-	clock-frequency = <400000>;
+#include "dra72-evm-tps65917.dtsi"
 
-	pcf_hdmi: pcf8575@26 {
-		compatible = "nxp,pcf8575";
-		reg = <0x26>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		/*
-		 * initial state is used here to keep the mdio interface
-		 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
-		 * VIN2_S0 driven high otherwise Ethernet stops working
-		 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
-		 */
-		lines-initial-states = <0x0f2b>;
-	};
-};
-
-&uart1 {
-	status = "okay";
+&hdmi {
+	vdda-supply = <&ldo3_reg>;
 };
 
-&elm {
-	status = "okay";
+&pcf_gpio_21 {
+	interrupt-parent = <&gpio6>;
+	interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 };
 
-&gpmc {
+&mac_sw {
+	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nand_default>;
-	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
-	nand@0,0 {
-		/* To use NAND, DIP switch SW5 must be set like so:
-		 * SW5.1 (NAND_SELn) = ON (LOW)
-		 * SW5.9 (GPMC_WPN) = OFF (HIGH)
-		 */
-		reg = <0 0 4>;		/* device IO registers */
-		ti,nand-ecc-opt = "bch8";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <16>;
-		gpmc,device-width = <2>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <80>;
-		gpmc,cs-wr-off-ns = <80>;
-		gpmc,adv-on-ns = <0>;
-		gpmc,adv-rd-off-ns = <60>;
-		gpmc,adv-wr-off-ns = <60>;
-		gpmc,we-on-ns = <10>;
-		gpmc,we-off-ns = <50>;
-		gpmc,oe-on-ns = <4>;
-		gpmc,oe-off-ns = <40>;
-		gpmc,access-ns = <40>;
-		gpmc,wr-access-ns = <80>;
-		gpmc,rd-cycle-ns = <80>;
-		gpmc,wr-cycle-ns = <80>;
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "NAND.SPL";
-			reg = <0x00000000 0x000020000>;
-		};
-		partition@1 {
-			label = "NAND.SPL.backup1";
-			reg = <0x00020000 0x00020000>;
-		};
-		partition@2 {
-			label = "NAND.SPL.backup2";
-			reg = <0x00040000 0x00020000>;
-		};
-		partition@3 {
-			label = "NAND.SPL.backup3";
-			reg = <0x00060000 0x00020000>;
-		};
-		partition@4 {
-			label = "NAND.u-boot-spl-os";
-			reg = <0x00080000 0x00040000>;
-		};
-		partition@5 {
-			label = "NAND.u-boot";
-			reg = <0x000c0000 0x00100000>;
-		};
-		partition@6 {
-			label = "NAND.u-boot-env";
-			reg = <0x001c0000 0x00020000>;
-		};
-		partition@7 {
-			label = "NAND.u-boot-env.backup1";
-			reg = <0x001e0000 0x00020000>;
-		};
-		partition@8 {
-			label = "NAND.kernel";
-			reg = <0x00200000 0x00800000>;
-		};
-		partition@9 {
-			label = "NAND.file-system";
-			reg = <0x00a00000 0x0f600000>;
-		};
-	};
-};
-
-&usb2_phy1 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&usb2_phy2 {
-	phy-supply = <&ldo4_reg>;
-};
-
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
 };
 
-&omap_dwc3_2 {
-	extcon = <&extcon_usb2>;
+&cpsw_port1 {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii";
+	ti,dual-emac-pvid = <1>;
 };
 
-&usb1 {
-	dr_mode = "peripheral";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb1_pins>;
+&cpsw_port2 {
+	status = "disabled";
 };
 
-&usb2 {
-	dr_mode = "host";
-	pinctrl-names = "default";
-	pinctrl-0 = <&usb2_pins>;
+&davinci_mdio_sw {
+	ethphy0: ethernet-phy@3 {
+		reg = <3>;
+	};
 };
 
 &mmc1 {
-	status = "okay";
-	pinctrl-names = "default";
+	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
 	pinctrl-0 = <&mmc1_pins_default>;
-
-	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	/*
-	 * SDCD signal is not being used here - using the fact that GPIO mode
-	 * is a viable alternative
-	 */
-	cd-gpios = <&gpio6 27 0>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+	pinctrl-2 = <&mmc1_pins_sdr12>;
+	pinctrl-3 = <&mmc1_pins_sdr25>;
+	pinctrl-4 = <&mmc1_pins_sdr50>;
+	pinctrl-5 = <&mmc1_pins_ddr50_rev10>;
+	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev10_conf>;
+	vqmmc-supply = <&ldo1_reg>;
 };
 
 &mmc2 {
-	/* SW5-3 in ON position */
-	status = "okay";
-	pinctrl-names = "default";
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
 	pinctrl-0 = <&mmc2_pins_default>;
-
-	vmmc-supply = <&evm_3v3>;
-	bus-width = <8>;
-	ti,non-removable;
-};
-
-&dra7_pmx_core {
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			0x198 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d12.rgmii1_txc */
-			0x19c (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d13.rgmii1_tctl */
-			0x1a0 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d14.rgmii1_td3 */
-			0x1a4 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d15.rgmii1_td2 */
-			0x1a8 (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d16.rgmii1_td1 */
-			0x1ac (PIN_OUTPUT | MUX_MODE3)	/* vin2a_d17.rgmii1_td0 */
-			0x1b0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d18.rgmii1_rclk */
-			0x1b4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d19.rgmii1_rctl */
-			0x1b8 (PIN_INPUT | MUX_MODE3)	/* vin2a_d20.rgmii1_rd3 */
-			0x1bc (PIN_INPUT | MUX_MODE3)	/* vin2a_d21.rgmii1_rd2 */
-			0x1c0 (PIN_INPUT | MUX_MODE3)	/* vin2a_d22.rgmii1_rd1 */
-			0x1c4 (PIN_INPUT | MUX_MODE3)	/* vin2a_d23.rgmii1_rd0 */
-		>;
-
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 2 */
-			0x198 (MUX_MODE15)
-			0x19c (MUX_MODE15)
-			0x1a0 (MUX_MODE15)
-			0x1a4 (MUX_MODE15)
-			0x1a8 (MUX_MODE15)
-			0x1ac (MUX_MODE15)
-			0x1b0 (MUX_MODE15)
-			0x1b4 (MUX_MODE15)
-			0x1b8 (MUX_MODE15)
-			0x1bc (MUX_MODE15)
-			0x1c0 (MUX_MODE15)
-			0x1c4 (MUX_MODE15)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0)	/* mdio_d.mdio_d */
-			0x240 (PIN_INPUT_PULLUP | MUX_MODE0)	/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			0x23c (MUX_MODE15)
-			0x240 (MUX_MODE15)
-		>;
-	};
+	pinctrl-1 = <&mmc2_pins_hs>;
+	pinctrl-2 = <&mmc2_pins_ddr_rev10>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
+	vmmc-supply = <&evm_1v8_sw>;
 };
 
-&mac {
+&ipu2 {
 	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <3>;
-	phy-mode = "rgmii";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	active_slave = <1>;
+	memory-region = <&ipu2_memory_region>;
 };
 
-&dcan1 {
-	status = "ok";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&dcan1_pins_default>;
-	pinctrl-1 = <&dcan1_pins_sleep>;
-};
-
-&qspi {
+&ipu1 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&qspi1_pins>;
-
-	spi-max-frequency = <48000000>;
-	m25p80@0 {
-		compatible = "s25fl256s1";
-		spi-max-frequency = <48000000>;
-		reg = <0>;
-		spi-tx-bus-width = <1>;
-		spi-rx-bus-width = <4>;
-		spi-cpol;
-		spi-cpha;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		/* MTD partition table.
-		 * The ROM checks the first four physical blocks
-		 * for a valid file to boot and the flash here is
-		 * 64KiB block size.
-		 */
-		partition@0 {
-			label = "QSPI.SPL";
-			reg = <0x00000000 0x000010000>;
-		};
-		partition@1 {
-			label = "QSPI.SPL.backup1";
-			reg = <0x00010000 0x00010000>;
-		};
-		partition@2 {
-			label = "QSPI.SPL.backup2";
-			reg = <0x00020000 0x00010000>;
-		};
-		partition@3 {
-			label = "QSPI.SPL.backup3";
-			reg = <0x00030000 0x00010000>;
-		};
-		partition@4 {
-			label = "QSPI.u-boot";
-			reg = <0x00040000 0x00100000>;
-		};
-		partition@5 {
-			label = "QSPI.u-boot-spl-os";
-			reg = <0x00140000 0x00080000>;
-		};
-		partition@6 {
-			label = "QSPI.u-boot-env";
-			reg = <0x001c0000 0x00010000>;
-		};
-		partition@7 {
-			label = "QSPI.u-boot-env.backup1";
-			reg = <0x001d0000 0x0010000>;
-		};
-		partition@8 {
-			label = "QSPI.kernel";
-			reg = <0x001e0000 0x0800000>;
-		};
-		partition@9 {
-			label = "QSPI.file-system";
-			reg = <0x009e0000 0x01620000>;
-		};
-	};
+	memory-region = <&ipu1_memory_region>;
 };
 
-&dss {
-	status = "ok";
-
-	vdda_video-supply = <&ldo5_reg>;
-};
-
-&hdmi {
-	status = "ok";
-	vdda-supply = <&ldo3_reg>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_pins>;
-
-	port {
-		hdmi_out: endpoint {
-			remote-endpoint = <&tpd12s015_in>;
-		};
-	};
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
 };
diff --git a/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..34eea3c048bd
--- /dev/null
+++ b/arch/arm/boot/dts/dra72x-mmc-iodelay.dtsi
@@ -0,0 +1,353 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MMC IOdelay values for TI's DRA72x, DRA71x and AM571x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev10' for PG 1.0,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ * e) If in future, DRA71x and DRA72x values differ, then add 'dra71_' and
+ *    'dra72_' tag to entries. Both the new and old entries should gain a tag.
+ *
+ * Datamanual Revisions:
+ *
+ * AM571x Silicon Revision 2.0: SPRS957D, Revised January 2017
+ * AM571x Silicon Revision 1.0: SPRS919M, Revised November 2017
+ * DRA71x : SPRS960B, Revised February 2017
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE15 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50_rev10: mmc1_pins_ddr50_rev10 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			DRA7XX_CORE_IOPAD(0x375C, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE14 | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50_rev20: mmc1_pins_ddr50_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs: mmc2_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_rev10: mmc2_pins_ddr_rev10 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a22.mmc2_dat7 */
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1)	/* gpmc_cs1.mmc2_cmd */
+		>;
+	};
+
+	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc4_pins_default: mmc4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr50_conf: mmc1_iodelay_ddr50_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
+			0x624 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x630 A_DELAY_PS(1375) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x63C A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x648 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x654 A_DELAY_PS(1000) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x620 A_DELAY_PS(1230) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(76) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65C A_DELAY_PS(99) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC1_MANUAL2 in datamanual */
+	mmc1_iodelay_sdr104_rev10_conf: mmc1_iodelay_sdr104_rev10_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(560) G_DELAY_PS(365)	/* CFG_MMC1_CLK_OUT */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(29) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(47) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65c A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(433) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64c A_DELAY_PS(287) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(351) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC1_MANUAL2 in datamanual */
+	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(520) G_DELAY_PS(320)	/* CFG_MMC1_CLK_OUT */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x638 A_DELAY_PS(40) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x644 A_DELAY_PS(83) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x650 A_DELAY_PS(98) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x65c A_DELAY_PS(106) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+			0x628 A_DELAY_PS(51) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x640 A_DELAY_PS(363) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x64c A_DELAY_PS(199) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x658 A_DELAY_PS(273) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_conf: mmc2_iodelay_ddr_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
+			0x1a4 A_DELAY_PS(119) G_DELAY_PS(0)	/* CFG_GPMC_A20_IN */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_IN */
+			0x1bc A_DELAY_PS(18) G_DELAY_PS(0)	/* CFG_GPMC_A22_IN */
+			0x1c8 A_DELAY_PS(894) G_DELAY_PS(0)	/* CFG_GPMC_A23_IN */
+			0x1d4 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_IN */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1ec A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_GPMC_A26_IN */
+			0x1f8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_IN */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x194 A_DELAY_PS(152) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(206) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(78) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(266) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(43) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL3 in datamanual */
+	mmc2_iodelay_hs200_rev10_conf: mmc2_iodelay_hs200_rev10_conf {
+		pinctrl-pin-array = <
+			0x194 A_DELAY_PS(150) G_DELAY_PS(95)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(250) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(125) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(100) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(870) G_DELAY_PS(415)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(695) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(924) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(719) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(824) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(877) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(446) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(847) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(586) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(1039) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+
+	/* Corresponds to MMC2_MANUAL3 in datamanual */
+	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+		pinctrl-pin-array = <
+			0x194 A_DELAY_PS(285) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1ac A_DELAY_PS(189) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b8 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_OUT */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(70)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(730) G_DELAY_PS(360)	/* CFG_GPMC_A23_OUT */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f4 A_DELAY_PS(70) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x368 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_CS1_OUT */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x1a8 A_DELAY_PS(231) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1b4 A_DELAY_PS(39) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1c0 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1d8 A_DELAY_PS(176) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1f0 A_DELAY_PS(101) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x364 A_DELAY_PS(360) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index eaca143faa77..90617261373c 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -1,9 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  * Based on "omap4.dtsi"
  */
 
@@ -12,20 +10,10 @@
 / {
 	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
+	aliases {
+		rproc0 = &ipu1;
+		rproc1 = &ipu2;
+		rproc2 = &dsp1;
 	};
 
 	pmu {
@@ -35,13 +23,88 @@
 	};
 };
 
+&l4_per2 {
+	target-module@5b000 {			/* 0x4845b000, ap 59 46.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x5b000 0x4>,
+		      <0x5b010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP2_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5b000 0x1000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra72-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0xE94>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
 &dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>;
+	reg = <0 0x80>,
+	      <0x4054 0x4>,
+	      <0x4300 0x20>;
 	reg-names = "dss", "pll1_clkctrl", "pll1";
 
-	clocks = <&dss_dss_clk>,
-		 <&dss_video1_clk>;
+	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>;
 	clock-names = "fck", "video1_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+};
+
+&pcie1_rc {
+	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+	compatible = "ti,dra726-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+	compatible = "ti,dra726-pcie-rc", "ti,dra7-pcie";
+};
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
new file mode 100644
index 000000000000..3256631510c5
--- /dev/null
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA74x/DRA76x/AM572x/AM574x platforms
+ */
+
+#include "dra7-ipu-dsp-common.dtsi"
+
+&mailbox6 {
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+		status = "okay";
+	};
+};
+
+&dsp2 {
+	mboxes = <&mailbox6 &mbox_dsp2_ipc3x>;
+	ti,timers = <&timer6>;
+	ti,watchdog-timers = <&timer13>;
+};
diff --git a/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..b9d040135c5f
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x-mmc-iodelay.dtsi
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MMC IOdelay values for TI's DRA74x, DRA75x and AM572x SoCs.
+ *
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * AM572x Silicon Revision 2.0: SPRS953F, Revised May 2019
+ * AM572x Silicon Revision 1.1: SPRS915R, Revised November 2016
+ *
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr12: mmc1_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr25: mmc1_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr104: mmc1_pins_sdr104 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs: mmc2_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_3_3v_rev11: mmc2_pins_ddr_3_3v_rev11 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_1_8v_rev11: mmc2_pins_ddr_1_8v_rev11 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_ddr_rev20: mmc2_pins_ddr_rev20 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc4_pins_default: mmc4_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc4_pins_hs: mmc4_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc3_pins_default: mmc3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_hs: mmc3_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr12: mmc3_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr25: mmc3_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc3_pins_sdr50: mmc3_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc4_pins_sdr12: mmc4_pins_sdr12 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+
+	mmc4_pins_sdr25: mmc4_pins_sdr25 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_rev11_conf: mmc1_iodelay_ddr_rev11_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(572) G_DELAY_PS(540)	/* CFG_MMC1_CLK_IN */
+			0x620 A_DELAY_PS(1525) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x624 A_DELAY_PS(0) G_DELAY_PS(600)	/* CFG_MMC1_CMD_IN */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(55) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x630 A_DELAY_PS(403) G_DELAY_PS(120)	/* CFG_MMC1_DAT0_IN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x63c A_DELAY_PS(23) G_DELAY_PS(60)	/* CFG_MMC1_DAT1_IN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x648 A_DELAY_PS(25) G_DELAY_PS(60)	/* CFG_MMC1_DAT2_IN */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_rev20_conf: mmc1_iodelay_ddr50_rev20_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(1076) G_DELAY_PS(330)	/* CFG_MMC1_CLK_IN */
+			0x620 A_DELAY_PS(1271) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x624 A_DELAY_PS(722) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x630 A_DELAY_PS(751) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(20) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x63C A_DELAY_PS(256) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x648 A_DELAY_PS(263) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x64C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65C A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_rev11_conf: mmc1_iodelay_sdr104_rev11_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(1063) G_DELAY_PS(17)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(23) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(2) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_rev20_conf: mmc1_iodelay_sdr104_rev20_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(600) G_DELAY_PS(400)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(30) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_rev11_conf: mmc2_iodelay_hs200_rev11_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(621) G_DELAY_PS(600)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(300) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(739) G_DELAY_PS(600)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(812) G_DELAY_PS(600)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(240) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(954) G_DELAY_PS(600)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(60)  G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(1340) G_DELAY_PS(420)	/* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(935) G_DELAY_PS(600)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(525) G_DELAY_PS(600)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(767) G_DELAY_PS(600)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(225) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(565) G_DELAY_PS(600)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(60) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(969) G_DELAY_PS(600)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(180) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_rev20_conf: mmc2_iodelay_hs200_rev20_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(274) G_DELAY_PS(0)       /* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(162) G_DELAY_PS(0)       /* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(401) G_DELAY_PS(0)       /* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(73) G_DELAY_PS(0)        /* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(465) G_DELAY_PS(0)       /* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(115) G_DELAY_PS(0)       /* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(633) G_DELAY_PS(0)       /* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(47) G_DELAY_PS(0)        /* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(935) G_DELAY_PS(280)     /* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(621) G_DELAY_PS(0)       /* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(183) G_DELAY_PS(0)       /* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(467) G_DELAY_PS(0)       /* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(0) G_DELAY_PS(0)         /* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(262) G_DELAY_PS(0)       /* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(46) G_DELAY_PS(0)        /* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(684) G_DELAY_PS(0)       /* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(76) G_DELAY_PS(0)        /* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Correspnds to MMC2_DDR_3V3_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_3_3v_rev11_conf: mmc2_iodelay_ddr_3_3v_rev11_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A19_IN */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a4 A_DELAY_PS(265) G_DELAY_PS(360)	/* CFG_GPMC_A20_IN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A21_IN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1bc A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A22_IN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1c8 A_DELAY_PS(287) G_DELAY_PS(420)	/* CFG_GPMC_A23_IN */
+			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1d4 A_DELAY_PS(144) G_DELAY_PS(240)	/* CFG_GPMC_A24_IN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1ec A_DELAY_PS(0) G_DELAY_PS(120)	/* CFG_GPMC_A26_IN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1f8 A_DELAY_PS(120) G_DELAY_PS(180)	/* CFG_GPMC_A27_IN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_DDR_1V8_MANUAL1 in datamanual */
+	mmc2_iodelay_ddr_1_8v_rev11_conf: mmc2_iodelay_ddr_1_8v_rev11_conf {
+		pinctrl-pin-array = <
+			0x18c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_IN */
+			0x190 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(174) G_DELAY_PS(0)	/* CFG_GPMC_A19_OUT */
+			0x1a4 A_DELAY_PS(274) G_DELAY_PS(240)	/* CFG_GPMC_A20_IN */
+			0x1a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(168) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b0 A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A21_IN */
+			0x1b4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(136) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1bc A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A22_IN */
+			0x1c0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1c8 A_DELAY_PS(514) G_DELAY_PS(360)	/* CFG_GPMC_A23_IN */
+			0x1d0 A_DELAY_PS(879) G_DELAY_PS(0)	/* CFG_GPMC_A23_OUT */
+			0x1d4 A_DELAY_PS(187) G_DELAY_PS(120)	/* CFG_GPMC_A24_IN */
+			0x1d8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_IN */
+			0x1e4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(34) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1ec A_DELAY_PS(0) G_DELAY_PS(60)	/* CFG_GPMC_A26_IN */
+			0x1f0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(120) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1f8 A_DELAY_PS(121) G_DELAY_PS(60)	/* CFG_GPMC_A27_IN */
+			0x1fc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x360 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_IN */
+			0x364 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(11) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_rev20_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_rev11_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(406) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(659) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(130) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(169) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(457) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_ds_rev11_conf: mmc4_iodelay_ds_rev11_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(96) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(582) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(391) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(561) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(588) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_ds_rev20_conf: mmc4_iodelay_ds_rev20_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_sdr12_hs_sdr25_rev11_conf: mmc4_iodelay_sdr12_hs_sdr25_rev11_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(2651) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1572) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(1913) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1721) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1891) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(1919) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_sdr12_hs_sdr25_rev20_conf: mmc4_iodelay_sdr12_hs_sdr25_rev20_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra74x-p.dtsi b/arch/arm/boot/dts/dra74x-p.dtsi
new file mode 100644
index 000000000000..006189dad7a7
--- /dev/null
+++ b/arch/arm/boot/dts/dra74x-p.dtsi
@@ -0,0 +1,27 @@
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+	ocp {
+		emif1: emif@4c000000 {
+			compatible = "ti,emif-dra7xx";
+			reg = <0x4c000000 0x200>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
+};
+
+/* MCAN interrupts are hard-wired to irqs 67, 68 */
+&crossbar_mpu {
+	ti,irqs-skip = <10 67 68 133 139 140>;
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index fa995d0ca1f2..cfb39dde4930 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -1,9 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  * Based on "omap4.dtsi"
  */
 
@@ -13,19 +11,11 @@
 	compatible = "ti,dra742", "ti,dra74", "ti,dra7";
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
+		cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
-			reg = <0>;
-
-			operating-points = <
-				/* kHz    uV */
-				1000000	1060000
-				1176000	1160000
-				>;
+			reg = <1>;
+			operating-points-v2 = <&cpu0_opp_table>;
 
 			clocks = <&dpll_mpu_ck>;
 			clock-names = "cpu";
@@ -33,17 +23,19 @@
 			clock-latency = <300000>; /* From omap-cpufreq driver */
 
 			/* cooling options */
-			cooling-min-level = <0>;
-			cooling-max-level = <2>;
 			#cooling-cells = <2>; /* min followed by max */
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
+
+			vbb-supply = <&abb_mpu>;
 		};
 	};
 
+	aliases {
+		rproc0 = &ipu1;
+		rproc1 = &ipu2;
+		rproc2 = &dsp1;
+		rproc3 = &dsp2;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
 		interrupt-parent = <&wakeupgen>;
@@ -52,39 +44,189 @@
 	};
 
 	ocp {
-		omap_dwc3_4: omap_dwc3_4@48940000 {
-			compatible = "ti,dwc3";
-			ti,hwmods = "usb_otg_ss4";
-			reg = <0x48940000 0x10000>;
-			interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+		dsp2_system: dsp_system@41500000 {
+			compatible = "syscon";
+			reg = <0x41500000 0x100>;
+		};
+
+
+		target-module@41501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41501000 0x4>,
+			      <0x41501010 0x4>,
+			      <0x41501014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41501000 0x1000>;
+			#size-cells = <1>;
 			#address-cells = <1>;
+
+			mmu0_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x0>;
+			};
+		};
+
+		target-module@41502000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x41502000 0x4>,
+			      <0x41502010 0x4>,
+			      <0x41502014 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
+					 SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			clock-names = "fck";
+			resets = <&prm_dsp2 1>;
+			reset-names = "rstctrl";
+			ranges = <0x0 0x41502000 0x1000>;
 			#size-cells = <1>;
-			utmi-mode = <2>;
-			ranges;
-			status = "disabled";
-			usb4: usb@48950000 {
-				compatible = "snps,dwc3";
-				reg = <0x48950000 0x17000>;
-				interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
-				tx-fifo-resize;
-				maximum-speed = "high-speed";
-				dr_mode = "otg";
+			#address-cells = <1>;
+
+			mmu1_dsp2: mmu@0 {
+				compatible = "ti,dra7-dsp-iommu";
+				reg = <0x0 0x100>;
+				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+				#iommu-cells = <0>;
+				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
 			};
 		};
+
+		dsp2: dsp@41000000 {
+			compatible = "ti,dra7-dsp";
+			reg = <0x41000000 0x48000>,
+			      <0x41600000 0x8000>,
+			      <0x41700000 0x8000>;
+			reg-names = "l2ram", "l1pram", "l1dram";
+			ti,bootreg = <&scm_conf 0x560 10>;
+			iommus = <&mmu0_dsp2>, <&mmu1_dsp2>;
+			status = "disabled";
+			resets = <&prm_dsp2 0>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			firmware-name = "dra7-dsp2-fw.xe66";
+		};
 	};
 };
 
+&cpu0_opp_table {
+	opp-shared;
+};
+
 &dss {
-	reg = <0x58000000 0x80>,
-	      <0x58004054 0x4>,
-	      <0x58004300 0x20>,
-	      <0x58005054 0x4>,
-	      <0x58005300 0x20>;
+	reg = <0 0x80>,
+	      <0x4054 0x4>,
+	      <0x4300 0x20>,
+	      <0x9054 0x4>,
+	      <0x9300 0x20>;
 	reg-names = "dss", "pll1_clkctrl", "pll1",
 		    "pll2_clkctrl", "pll2";
 
-	clocks = <&dss_dss_clk>,
-		 <&dss_video1_clk>,
-		 <&dss_video2_clk>;
+	clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 12>,
+		 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 13>;
 	clock-names = "fck", "video1_clk", "video2_clk";
 };
+
+&mailbox5 {
+	mbox_ipu1_ipc3x: mbox-ipu1-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp1_ipc3x: mbox-dsp1-ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&mailbox6 {
+	mbox_ipu2_ipc3x: mbox-ipu2-ipc3x {
+		ti,mbox-tx = <6 2 2>;
+		ti,mbox-rx = <4 2 2>;
+		status = "disabled";
+	};
+	mbox_dsp2_ipc3x: mbox-dsp2-ipc3x {
+		ti,mbox-tx = <5 2 2>;
+		ti,mbox-rx = <1 2 2>;
+		status = "disabled";
+	};
+};
+
+&pcie1_rc {
+	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};
+
+&pcie1_ep {
+	compatible = "ti,dra746-pcie-ep", "ti,dra7-pcie-ep";
+};
+
+&pcie2_rc {
+	compatible = "ti,dra746-pcie-rc", "ti,dra7-pcie";
+};
+
+&l4_per3 {
+	segment@0 {
+		usb4_tm: target-module@140000 {         /* 0x48940000, ap 75 3c.0 */
+			compatible = "ti,sysc-omap4", "ti,sysc";
+			reg = <0x140000 0x4>,
+			      <0x140010 0x4>;
+			reg-names = "rev", "sysc";
+			ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
+			ti,sysc-midle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			/* Domains (P, C): l3init_pwrdm, l3init_clkdm */
+			clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x140000 0x20000>;
+
+			omap_dwc3_4: omap_dwc3_4@0 {
+				compatible = "ti,dwc3";
+				reg = <0 0x10000>;
+				interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				utmi-mode = <2>;
+				ranges;
+				status = "disabled";
+				usb4: usb@10000 {
+					compatible = "snps,dwc3";
+					reg = <0x10000 0x17000>;
+					interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-names = "peripheral",
+							  "host",
+							  "otg";
+					maximum-speed = "high-speed";
+					dr_mode = "otg";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
new file mode 100644
index 000000000000..57868ac60d29
--- /dev/null
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -0,0 +1,567 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+/dts-v1/;
+
+#include "dra76x.dtsi"
+#include "dra7-evm-common.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
+#include <dt-bindings/net/ti-dp83867.h>
+
+/ {
+	model = "TI DRA762 EVM";
+	compatible = "ti,dra76-evm", "ti,dra762", "ti,dra7";
+
+	aliases {
+		display0 = &hdmi0;
+
+		sound0 = &sound0;
+		sound1 = &hdmi;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_cma_pool: ipu2_cma@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_cma_pool: dsp1_cma@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_cma_pool: ipu1_cma@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_cma_pool: dsp2_cma@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
+	vsys_12v0: fixedregulator-vsys12v0 {
+		/* main supply */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_5v0: fixedregulator-vsys5v0 {
+		/* Output of Cntlr B of TPS43351-Q1 on dra76-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vsys_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v6: fixedregulator-vio_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_3v3: fixedregulator-vsys3v3 {
+		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_12v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v3: fixedregulator-vio_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vio_3v3_sd: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vio_3v3>;
+		enable-active-high;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	vio_1v8: fixedregulator-vio_1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&smps5_reg>;
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 0>;	/* gpio5_8 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		vin-supply = <&vsys_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	aic_dvdd: fixedregulator-aic_dvdd {
+		/* TPS77018DBVT */
+		compatible = "regulator-fixed";
+		regulator-name = "aic_dvdd";
+		vin-supply = <&vio_3v3>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	hdmi0: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tpd12s015_out>;
+			};
+		};
+	};
+
+	tpd12s015: encoder {
+		compatible = "ti,tpd12s015";
+
+		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>,   /* gpio7_30, CT CP HPD */
+			<&gpio7 31 GPIO_ACTIVE_HIGH>,   /* gpio7_31, LS OE */
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;   /* gpio7_12/sp1_cs2, HPD */
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tpd12s015_in: endpoint {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tpd12s015_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps65917: tps65917@58 {
+		compatible = "ti,tps65917";
+		reg = <0x58>;
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		tps65917_pmic {
+			compatible = "ti,tps65917-pmic";
+
+			smps12-in-supply = <&vsys_3v3>;
+			smps3-in-supply = <&vsys_3v3>;
+			smps4-in-supply = <&vsys_3v3>;
+			smps5-in-supply = <&vsys_3v3>;
+			ldo1-in-supply = <&vsys_3v3>;
+			ldo2-in-supply = <&vsys_3v3>;
+			ldo3-in-supply = <&vsys_5v0>;
+			ldo4-in-supply = <&vsys_5v0>;
+			ldo5-in-supply = <&vsys_3v3>;
+
+			tps65917_regulators: regulators {
+				smps12_reg: smps12 {
+					/* VDD_DSPEVE */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps3_reg: smps3 {
+					/* VDD_CORE */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				smps4_reg: smps4 {
+					/* VDD_IVA */
+					regulator-name = "smps4";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				smps5_reg: smps5 {
+					/* VDDS1V8 */
+					regulator-name = "smps5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo1_reg: ldo1 {
+					/* LDO1_OUT --> VDA_PHY1_1V8  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+					regulator-allow-bypass;
+				};
+
+				ldo2_reg: ldo2 {
+					/* LDO2_OUT --> VDA_PHY2_1V8 */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-allow-bypass;
+					regulator-always-on;
+				};
+
+				ldo3_reg: ldo3 {
+					/* VDA_USB_3V3 */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				ldo5_reg: ldo5 {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldo5";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldo4_reg: ldo4 {
+					/* VDD_SDIO_DV */
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps65917_power_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps65917>;
+			interrupts = <1 IRQ_TYPE_NONE>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <6>;
+		};
+	};
+
+	lp87565: lp87565@60 {
+		compatible = "ti,lp87565-q1";
+		reg = <0x60>;
+
+		buck10-in-supply =<&vsys_3v3>;
+		buck23-in-supply =<&vsys_3v3>;
+
+		regulators: regulators {
+			buck10_reg: buck10 {
+				/*VDD_MPU*/
+				regulator-name = "buck10";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck23_reg: buck23 {
+				/* VDD_GPU*/
+				regulator-name = "buck23";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1250000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf_lcd: pcf8757@20 {
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+	};
+
+	pcf_gpio_21: pcf8757@21 {
+		compatible = "nxp,pcf8575";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	pcf_hdmi: pcf8575@26 {
+		compatible = "nxp,pcf8575";
+		reg = <0x26>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		hdmi-audio-hog {
+			/* vin6_sel_s0: high: VIN6, low: audio */
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			output-low;
+			line-name = "vin6_sel_s0";
+		};
+	};
+
+	tlv320aic3106: tlv320aic3106@19 {
+		#sound-dai-cells = <0>;
+		compatible = "ti,tlv320aic3106";
+		reg = <0x19>;
+		adc-settle-ms = <40>;
+		ai3x-micbias-vg = <1>;		/* 2.0V */
+		status = "okay";
+
+		/* Regulators */
+		AVDD-supply = <&vio_3v3>;
+		IOVDD-supply = <&vio_3v3>;
+		DRVDD-supply = <&vio_3v3>;
+		DVDD-supply = <&aic_dvdd>;
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&buck10_reg>;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vio_3v3_sd>;
+	vqmmc-supply = <&ldo4_reg>;
+	bus-width = <4>;
+	/*
+	 * SDCD signal is not being used here - using the fact that GPIO mode
+	 * is always hardwired.
+	 */
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default", "hs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_hs>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vio_1v8>;
+	vqmmc-supply = <&vio_1v8>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
+	pinctrl-0 = <&mmc2_pins_default>;
+	pinctrl-1 = <&mmc2_pins_default>;
+	pinctrl-2 = <&mmc2_pins_default>;
+	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
+};
+
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&vio_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25";
+	pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
+	pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+};
+
+/* No RTC on this device */
+&rtc {
+	status = "disabled";
+};
+
+&mac_sw {
+	status = "okay";
+};
+
+&cpsw_port1 {
+	phy-handle = <&dp83867_0>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	phy-handle = <&dp83867_1>;
+	phy-mode = "rgmii-id";
+	ti,dual-emac-pvid = <2>;
+};
+
+&davinci_mdio_sw {
+	dp83867_0: ethernet-phy@2 {
+		reg = <2>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+
+	dp83867_1: ethernet-phy@3 {
+		reg = <3>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
+		ti,min-output-impedance;
+		ti,dp83867-rxctrl-strap-quirk;
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldo3_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldo3_reg>;
+};
+
+&dss {
+	status = "okay";
+	vdda_video-supply = <&ldo5_reg>;
+};
+
+&hdmi {
+	status = "okay";
+
+	vdda-supply = <&ldo1_reg>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&tpd12s015_in>;
+		};
+	};
+};
+
+&qspi {
+	spi-max-frequency = <96000000>;
+	flash@0 {
+		spi-max-frequency = <96000000>;
+	};
+};
+
+&pcie2_phy {
+	status = "okay";
+};
+
+&pcie1_rc {
+	num-lanes = <2>;
+	phys = <&pcie1_phy>, <&pcie2_phy>;
+	phy-names = "pcie-phy0", "pcie-phy1";
+};
+
+&pcie1_ep {
+	num-lanes = <2>;
+	phys = <&pcie1_phy>, <&pcie2_phy>;
+	phy-names = "pcie-phy0", "pcie-phy1";
+};
+
+&extcon_usb1 {
+	vbus-gpio = <&pcf_lcd 14 GPIO_ACTIVE_HIGH>;
+};
+
+&extcon_usb2 {
+	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
+};
+
+&m_can0 {
+	can-transceiver {
+		max-bitrate = <5000000>;
+	};
+};
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_cma_pool>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_cma_pool>;
+};
diff --git a/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
new file mode 100644
index 000000000000..fdca48186916
--- /dev/null
+++ b/arch/arm/boot/dts/dra76x-mmc-iodelay.dtsi
@@ -0,0 +1,285 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Texas Instruments
+// MMC IOdelay values for TI's DRA76x and AM576x SoCs.
+// Author: Sekhar Nori <nsekhar@ti.com>
+
+/*
+ * Rules for modifying this file:
+ * a) Update of this file should typically correspond to a datamanual revision.
+ *    Datamanual revision that was used should be updated in comment below.
+ *    If there is no update to datamanual, do not update the values. If you
+ *    need to use values different from that recommended by the datamanual
+ *    for your design, then you should consider adding values to the device-
+ *    -tree file for your board directly.
+ * b) We keep the mode names as close to the datamanual as possible. So
+ *    if the manual calls a mode, DDR50, or DDR or DDR 1.8v or DDR 3.3v,
+ *    we follow that in code too.
+ * c) If the values change between multiple revisions of silicon, we add
+ *    a revision tag to both the new and old entry. Use 'rev11' for PG 1.1,
+ *    'rev20' for PG 2.0 and so on.
+ * d) The node name and node label should be the exact same string. This is
+ *    to curb naming creativity and achieve consistency.
+ *
+ * Datamanual Revisions:
+ *
+ * DRA76x Silicon Revision 1.0: SPRS993E, Revised December 2018
+ *
+ */
+
+&dra7_pmx_core {
+	mmc1_pins_default: mmc1_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_hs: mmc1_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_sdr50: mmc1_pins_sdr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE10 | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc1_pins_ddr50: mmc1_pins_ddr50 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_clk.clk */
+			DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_cmd.cmd */
+			DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat0.dat0 */
+			DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat1.dat1 */
+			DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat2.dat2 */
+			DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)	/* mmc1_dat3.dat3 */
+		>;
+	};
+
+	mmc2_pins_default: mmc2_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc2_pins_hs200: mmc2_pins_hs200 {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+			DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+			DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+			DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+			DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+			DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+			DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+			DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+			DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+			DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+		>;
+	};
+
+	mmc3_pins_default: mmc3_pins_default {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x377c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_clk.mmc3_clk */
+			DRA7XX_CORE_IOPAD(0x3780, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_cmd.mmc3_cmd */
+			DRA7XX_CORE_IOPAD(0x3784, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat0.mmc3_dat0 */
+			DRA7XX_CORE_IOPAD(0x3788, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat1.mmc3_dat1 */
+			DRA7XX_CORE_IOPAD(0x378c, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat2.mmc3_dat2 */
+			DRA7XX_CORE_IOPAD(0x3790, (PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE0)) /* mmc3_dat3.mmc3_dat3 */
+		>;
+	};
+
+	mmc4_pins_hs: mmc4_pins_hs {
+		pinctrl-single,pins = <
+			DRA7XX_CORE_IOPAD(0x37e8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_ctsn.mmc4_clk */
+			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart1_rtsn.mmc4_cmd */
+			DRA7XX_CORE_IOPAD(0x37f0, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rxd.mmc4_dat0 */
+			DRA7XX_CORE_IOPAD(0x37f4, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_txd.mmc4_dat1 */
+			DRA7XX_CORE_IOPAD(0x37f8, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_ctsn.mmc4_dat2 */
+			DRA7XX_CORE_IOPAD(0x37fc, PIN_INPUT_PULLUP | MODE_SELECT | MUX_MODE3) /* uart2_rtsn.mmc4_dat3 */
+		>;
+	};
+};
+
+&dra7_iodelay_core {
+
+	/* Corresponds to MMC1_DDR_MANUAL1 in datamanual */
+	mmc1_iodelay_ddr_conf: mmc1_iodelay_ddr_conf {
+		pinctrl-pin-array = <
+			0x618 A_DELAY_PS(489) G_DELAY_PS(0)	/* CFG_MMC1_CLK_IN */
+			0x624 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_IN */
+			0x630 A_DELAY_PS(374) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_IN */
+			0x63c A_DELAY_PS(31) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_IN */
+			0x648 A_DELAY_PS(56) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_IN */
+			0x654 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_IN */
+			0x620 A_DELAY_PS(1355) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(4)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC1_SDR104_MANUAL1 in datamanual */
+	mmc1_iodelay_sdr104_conf: mmc1_iodelay_sdr104_conf {
+		pinctrl-pin-array = <
+			0x620 A_DELAY_PS(892) G_DELAY_PS(0)	/* CFG_MMC1_CLK_OUT */
+			0x628 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OEN */
+			0x62c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_CMD_OUT */
+			0x634 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OEN */
+			0x638 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT0_OUT */
+			0x640 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OEN */
+			0x644 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT1_OUT */
+			0x64c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OEN */
+			0x650 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT2_OUT */
+			0x658 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OEN */
+			0x65c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC1_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC2_HS200_MANUAL1 in datamanual */
+	mmc2_iodelay_hs200_conf: mmc2_iodelay_hs200_conf {
+		pinctrl-pin-array = <
+			0x190 A_DELAY_PS(384) G_DELAY_PS(0)	/* CFG_GPMC_A19_OEN */
+			0x194 A_DELAY_PS(350) G_DELAY_PS(174)	/* CFG_GPMC_A19_OUT */
+			0x1a8 A_DELAY_PS(410) G_DELAY_PS(0)	/* CFG_GPMC_A20_OEN */
+			0x1ac A_DELAY_PS(335) G_DELAY_PS(0)	/* CFG_GPMC_A20_OUT */
+			0x1b4 A_DELAY_PS(468) G_DELAY_PS(0)	/* CFG_GPMC_A21_OEN */
+			0x1b8 A_DELAY_PS(339) G_DELAY_PS(0)	/* CFG_GPMC_A21_OUT */
+			0x1c0 A_DELAY_PS(676) G_DELAY_PS(0)	/* CFG_GPMC_A22_OEN */
+			0x1c4 A_DELAY_PS(219) G_DELAY_PS(0)	/* CFG_GPMC_A22_OUT */
+			0x1d0 A_DELAY_PS(1062) G_DELAY_PS(154)	/* CFG_GPMC_A23_OUT */
+			0x1d8 A_DELAY_PS(640) G_DELAY_PS(0)	/* CFG_GPMC_A24_OEN */
+			0x1dc A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A24_OUT */
+			0x1e4 A_DELAY_PS(356) G_DELAY_PS(0)	/* CFG_GPMC_A25_OEN */
+			0x1e8 A_DELAY_PS(150) G_DELAY_PS(0)	/* CFG_GPMC_A25_OUT */
+			0x1f0 A_DELAY_PS(579) G_DELAY_PS(0)	/* CFG_GPMC_A26_OEN */
+			0x1f4 A_DELAY_PS(200) G_DELAY_PS(0)	/* CFG_GPMC_A26_OUT */
+			0x1fc A_DELAY_PS(435) G_DELAY_PS(0)	/* CFG_GPMC_A27_OEN */
+			0x200 A_DELAY_PS(236) G_DELAY_PS(0)	/* CFG_GPMC_A27_OUT */
+			0x364 A_DELAY_PS(759) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OEN */
+			0x368 A_DELAY_PS(372) G_DELAY_PS(0)	/* CFG_GPMC_CS1_OUT */
+	      >;
+	};
+
+	/* Corresponds to MMC3_MANUAL1 in datamanual */
+	mmc3_iodelay_manual1_conf: mmc3_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(0) G_DELAY_PS(386)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(605) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(171) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(221) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(474) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC3_MANUAL2 in datamanual */
+	mmc3_iodelay_sdr50_conf: mmc3_iodelay_sdr50_conf {
+		pinctrl-pin-array = <
+			0x678 A_DELAY_PS(852) G_DELAY_PS(0)	/* CFG_MMC3_CLK_IN */
+			0x680 A_DELAY_PS(94) G_DELAY_PS(0)	/* CFG_MMC3_CLK_OUT */
+			0x684 A_DELAY_PS(122) G_DELAY_PS(0)	/* CFG_MMC3_CMD_IN */
+			0x688 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OEN */
+			0x68c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_CMD_OUT */
+			0x690 A_DELAY_PS(91) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_IN */
+			0x694 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OEN */
+			0x698 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT0_OUT */
+			0x69c A_DELAY_PS(57) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_IN */
+			0x6a0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OEN */
+			0x6a4 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT1_OUT */
+			0x6a8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_IN */
+			0x6ac A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OEN */
+			0x6b0 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT2_OUT */
+			0x6b4 A_DELAY_PS(375) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_IN */
+			0x6b8 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OEN */
+			0x6bc A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_MMC3_DAT3_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_MANUAL1 in datamanual */
+	mmc4_iodelay_manual1_conf: mmc4_iodelay_manual1_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(1147) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(1834) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(2165) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(1929) G_DELAY_PS(64)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(1935) G_DELAY_PS(128)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(2172) G_DELAY_PS(44)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+
+	/* Corresponds to MMC4_DS_MANUAL1 in datamanual */
+	mmc4_iodelay_default_conf: mmc4_iodelay_default_conf {
+		pinctrl-pin-array = <
+			0x840 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_IN */
+			0x848 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_CTSN_OUT */
+			0x84c A_DELAY_PS(307) G_DELAY_PS(0)	/* CFG_UART1_RTSN_IN */
+			0x850 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OEN */
+			0x854 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART1_RTSN_OUT */
+			0x870 A_DELAY_PS(785) G_DELAY_PS(0)	/* CFG_UART2_CTSN_IN */
+			0x874 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OEN */
+			0x878 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_CTSN_OUT */
+			0x87c A_DELAY_PS(613) G_DELAY_PS(0)	/* CFG_UART2_RTSN_IN */
+			0x880 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OEN */
+			0x884 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RTSN_OUT */
+			0x888 A_DELAY_PS(683) G_DELAY_PS(0)	/* CFG_UART2_RXD_IN */
+			0x88c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OEN */
+			0x890 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_RXD_OUT */
+			0x894 A_DELAY_PS(835) G_DELAY_PS(0)	/* CFG_UART2_TXD_IN */
+			0x898 A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OEN */
+			0x89c A_DELAY_PS(0) G_DELAY_PS(0)	/* CFG_UART2_TXD_OUT */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/dra76x.dtsi b/arch/arm/boot/dts/dra76x.dtsi
new file mode 100644
index 000000000000..931db7932c11
--- /dev/null
+++ b/arch/arm/boot/dts/dra76x.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "dra74x.dtsi"
+
+/ {
+	compatible = "ti,dra762", "ti,dra7";
+
+	ocp {
+		target-module@42c01900 {
+			compatible = "ti,sysc-dra7-mcan", "ti,sysc";
+			ranges = <0x0 0x42c00000 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x42c01900 0x4>,
+			      <0x42c01904 0x4>,
+			      <0x42c01908 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET |
+					 SYSC_DRA7_MCAN_ENAWAKEUP)>;
+			ti,syss-mask = <1>;
+			clocks = <&wkupaon_clkctrl DRA7_WKUPAON_ADC_CLKCTRL 0>;
+			clock-names = "fck";
+
+			m_can0: mcan@1a00 {
+				compatible = "bosch,m_can";
+				reg = <0x1a00 0x4000>, <0x0 0x18FC>;
+				reg-names = "m_can", "message_ram";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "int0", "int1";
+				clocks = <&l3_iclk_div>, <&mcan_clk>;
+				clock-names = "hclk", "cclk";
+				bosch,mram-cfg = <0x0 0 0 32 0 0 1 1>;
+			};
+		};
+	};
+
+};
+
+&l4_per3 {
+	target-module@1b0000 {			/* 0x489b0000, ap 25 34.0 */
+		compatible = "ti,sysc-omap4", "ti,sysc";
+		reg = <0x1b0000 0x4>,
+		      <0x1b0010 0x4>;
+		reg-names = "rev", "sysc";
+		ti,sysc-midle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+				<SYSC_IDLE_NO>;
+		clocks = <&cam_clkctrl DRA7_CAM_VIP3_CLKCTRL 0>;
+		clock-names = "fck";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x1b0000 0x10000>;
+
+		cal: cal@0 {
+			compatible = "ti,dra76-cal";
+			reg = <0x0000 0x400>,
+			      <0x0800 0x40>,
+			      <0x0900 0x40>;
+			reg-names = "cal_top",
+				    "cal_rx_core0",
+				    "cal_rx_core1";
+			interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+			ti,camerrx-control = <&scm_conf 0x6dc>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi2_0: port@0 {
+					reg = <0>;
+				};
+				csi2_1: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+	};
+};
+
+&scm_conf_clocks {
+	dpll_gmac_h14x2_ctrl_ck: dpll_gmac_h14x2_ctrl_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_gmac_x2_ck>;
+		ti,max-div = <63>;
+		reg = <0x03fc>;
+		ti,bit-shift = <20>;
+		ti,latch-bit = <26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_ck>;
+		assigned-clock-rates = <80000000>;
+	};
+
+	dpll_gmac_h14x2_ctrl_mux_ck: dpll_gmac_h14x2_ctrl_mux_ck@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_gmac_ck>, <&dpll_gmac_h14x2_ctrl_ck>;
+		reg = <0x3fc>;
+		ti,bit-shift = <29>;
+		ti,latch-bit = <26>;
+		assigned-clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		assigned-clock-parents = <&dpll_gmac_h14x2_ctrl_ck>;
+	};
+
+	mcan_clk: mcan_clk@3fc {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_gmac_h14x2_ctrl_mux_ck>;
+		ti,bit-shift = <27>;
+		reg = <0x3fc>;
+	};
+};
+
+&rtctarget {
+	status = "disabled";
+};
+
+&usb4_tm {
+	status = "disabled";
+};
+
+&mmc3 {
+	/* dra76x is not affected by i887 */
+	max-frequency = <96000000>;
+};
+
+&cpu0_opp_table {
+	opp_plus@1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1250000 950000 1250000>,
+				<1250000 950000 1250000>;
+		opp-supported-hw = <0xFF 0x08>;
+	};
+};
+
+&opp_supply_mpu {
+	ti,efuse-settings = <
+	/* uV   offset */
+	1060000 0x0
+	1160000 0x4
+	1210000 0x8
+	1250000 0xC
+	>;
+};
+
+&abb_mpu {
+	ti,abb_info = <
+	/*uV		ABB	efuse	rbb_m fbb_m	vset_m*/
+	1060000		0	0x0	0 0x02000000 0x01F00000
+	1160000		0	0x4	0 0x02000000 0x01F00000
+	1210000		0	0x8	0 0x02000000 0x01F00000
+	1250000		0	0xC	0 0x02000000 0x01F00000
+	>;
+};
diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index 357bedeebfac..04a7a6d1d529 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1,209 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree Source for DRA7xx clock data
  *
  * Copyright (C) 2013 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 &cm_core_aon_clocks {
-	atl_clkin0_ck: atl_clkin0_ck {
+	atl_clkin0_ck: clock-atl-clkin0 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
+		clock-output-names = "atl_clkin0_ck";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin1_ck: atl_clkin1_ck {
+	atl_clkin1_ck: clock-atl-clkin1 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
+		clock-output-names = "atl_clkin1_ck";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin2_ck: atl_clkin2_ck {
+	atl_clkin2_ck: clock-atl-clkin2 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
+		clock-output-names = "atl_clkin2_ck";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	atl_clkin3_ck: atl_clkin3_ck {
+	atl_clkin3_ck: clock-atl-clkin3 {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-atl-clock";
-		clocks = <&atl_gfclk_mux>;
+		clock-output-names = "atl_clkin3_ck";
+		clocks = <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>;
 	};
 
-	hdmi_clkin_ck: hdmi_clkin_ck {
+	hdmi_clkin_ck: clock-hdmi-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "hdmi_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	mlb_clkin_ck: mlb_clkin_ck {
+	mlb_clkin_ck: clock-mlb-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "mlb_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	mlbp_clkin_ck: mlbp_clkin_ck {
+	mlbp_clkin_ck: clock-mlbp-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "mlbp_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	pciesref_acs_clk_ck: pciesref_acs_clk_ck {
+	pciesref_acs_clk_ck: clock-pciesref-acs {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "pciesref_acs_clk_ck";
 		clock-frequency = <100000000>;
 	};
 
-	ref_clkin0_ck: ref_clkin0_ck {
+	ref_clkin0_ck: clock-ref-clkin0 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin0_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin1_ck: ref_clkin1_ck {
+	ref_clkin1_ck: clock-ref-clkin1 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin1_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin2_ck: ref_clkin2_ck {
+	ref_clkin2_ck: clock-ref-clkin2 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin2_ck";
 		clock-frequency = <0>;
 	};
 
-	ref_clkin3_ck: ref_clkin3_ck {
+	ref_clkin3_ck: clock-ref-clkin3 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "ref_clkin3_ck";
 		clock-frequency = <0>;
 	};
 
-	rmii_clk_ck: rmii_clk_ck {
+	rmii_clk_ck: clock-rmii {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "rmii_clk_ck";
 		clock-frequency = <0>;
 	};
 
-	sdvenc_clkin_ck: sdvenc_clkin_ck {
+	sdvenc_clkin_ck: clock-sdvenc-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sdvenc_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	secure_32k_clk_src_ck: secure_32k_clk_src_ck {
+	secure_32k_clk_src_ck: clock-secure-32k-clk-src {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "secure_32k_clk_src_ck";
 		clock-frequency = <32768>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_clk32_crystal_ck: clock-sys-clk32-crystal {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_clk32_crystal_ck";
 		clock-frequency = <32768>;
 	};
 
-	virt_12000000_ck: virt_12000000_ck {
+	sys_clk32_pseudo_ck: clock-sys-clk32-pseudo {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-output-names = "sys_clk32_pseudo_ck";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
+	virt_12000000_ck: clock-virt-12000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_12000000_ck";
 		clock-frequency = <12000000>;
 	};
 
-	virt_13000000_ck: virt_13000000_ck {
+	virt_13000000_ck: clock-virt-13000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_13000000_ck";
 		clock-frequency = <13000000>;
 	};
 
-	virt_16800000_ck: virt_16800000_ck {
+	virt_16800000_ck: clock-virt-16800000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_16800000_ck";
 		clock-frequency = <16800000>;
 	};
 
-	virt_19200000_ck: virt_19200000_ck {
+	virt_19200000_ck: clock-virt-19200000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_19200000_ck";
 		clock-frequency = <19200000>;
 	};
 
-	virt_20000000_ck: virt_20000000_ck {
+	virt_20000000_ck: clock-virt-20000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_20000000_ck";
 		clock-frequency = <20000000>;
 	};
 
-	virt_26000000_ck: virt_26000000_ck {
+	virt_26000000_ck: clock-virt-26000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_26000000_ck";
 		clock-frequency = <26000000>;
 	};
 
-	virt_27000000_ck: virt_27000000_ck {
+	virt_27000000_ck: clock-virt-27000000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_27000000_ck";
 		clock-frequency = <27000000>;
 	};
 
-	virt_38400000_ck: virt_38400000_ck {
+	virt_38400000_ck: clock-virt-38400000 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "virt_38400000_ck";
 		clock-frequency = <38400000>;
 	};
 
-	sys_clkin2: sys_clkin2 {
+	sys_clkin2: clock-sys-clkin2 {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "sys_clkin2";
 		clock-frequency = <22579200>;
 	};
 
-	usb_otg_clkin_ck: usb_otg_clkin_ck {
+	usb_otg_clkin_ck: clock-usb-otg-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "usb_otg_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video1_clkin_ck: video1_clkin_ck {
+	video1_clkin_ck: clock-video1-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video1_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video1_m2_clkin_ck: video1_m2_clkin_ck {
+	video1_m2_clkin_ck: clock-video1-m2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video1_m2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video2_clkin_ck: video2_clkin_ck {
+	video2_clkin_ck: clock-video2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	video2_m2_clkin_ck: video2_m2_clkin_ck {
+	video2_m2_clkin_ck: clock-video2-m2-clkin {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "video2_m2_clkin_ck";
 		clock-frequency = <0>;
 	};
 
-	dpll_abe_ck: dpll_abe_ck {
+	dpll_abe_ck: clock@1e0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-m4xen-clock";
+		clock-output-names = "dpll_abe_ck";
 		clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>;
 		reg = <0x01e0>, <0x01e4>, <0x01ec>, <0x01e8>;
 	};
 
-	dpll_abe_x2_ck: dpll_abe_x2_ck {
+	dpll_abe_x2_ck: clock-dpll-abe-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_abe_x2_ck";
 		clocks = <&dpll_abe_ck>;
 	};
 
-	dpll_abe_m2x2_ck: dpll_abe_m2x2_ck {
+	dpll_abe_m2x2_ck: clock-dpll-abe-m2x2-8@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -212,18 +251,20 @@
 		ti,invert-autoidle-bit;
 	};
 
-	abe_clk: abe_clk {
+	abe_clk: clock-abe@108 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_clk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		ti,max-div = <4>;
 		reg = <0x0108>;
 		ti,index-power-of-two;
 	};
 
-	dpll_abe_m2_ck: dpll_abe_m2_ck {
+	dpll_abe_m2_ck: clock-dpll-abe-m2-8@1f0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m2_ck";
 		clocks = <&dpll_abe_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -232,9 +273,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_abe_m3x2_ck: dpll_abe_m3x2_ck {
+	dpll_abe_m3x2_ck: clock-dpll-abe-m3x2-8@1f4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_abe_m3x2_ck";
 		clocks = <&dpll_abe_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -243,30 +285,34 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_byp_mux: dpll_core_byp_mux {
+	dpll_core_byp_mux: clock-dpll-core-byp-mux-23@12c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_core_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x012c>;
 	};
 
-	dpll_core_ck: dpll_core_ck {
+	dpll_core_ck: clock@120 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
+		clock-output-names = "dpll_core_ck";
 		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
-	dpll_core_x2_ck: dpll_core_x2_ck {
+	dpll_core_x2_ck: clock-dpll-core-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_core_x2_ck";
 		clocks = <&dpll_core_ck>;
 	};
 
-	dpll_core_h12x2_ck: dpll_core_h12x2_ck {
+	dpll_core_h12x2_ck: clock-dpll-core-h12x2-8@13c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h12x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -275,24 +321,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
+	mpu_dpll_hs_clk_div: clock-mpu-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_mpu_ck: dpll_mpu_ck {
+	dpll_mpu_ck: clock@160 {
 		#clock-cells = <0>;
 		compatible = "ti,omap5-mpu-dpll-clock";
+		clock-output-names = "dpll_mpu_ck";
 		clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>;
 		reg = <0x0160>, <0x0164>, <0x016c>, <0x0168>;
 	};
 
-	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+	dpll_mpu_m2_ck: clock-dpll-mpu-m2-8@170 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_mpu_m2_ck";
 		clocks = <&dpll_mpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -301,119 +350,145 @@
 		ti,invert-autoidle-bit;
 	};
 
-	mpu_dclk_div: mpu_dclk_div {
+	mpu_dclk_div: clock-mpu-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "mpu_dclk_div";
 		clocks = <&dpll_mpu_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div {
+	dsp_dpll_hs_clk_div: clock-dsp-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dsp_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_dsp_byp_mux: dpll_dsp_byp_mux {
+	dpll_dsp_byp_mux: clock-dpll-dsp-byp-mux-23@240 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_dsp_byp_mux";
 		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x0240>;
 	};
 
-	dpll_dsp_ck: dpll_dsp_ck {
+	dpll_dsp_ck: clock@234 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_dsp_ck";
 		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
+		assigned-clocks = <&dpll_dsp_ck>;
+		assigned-clock-rates = <600000000>;
 	};
 
-	dpll_dsp_m2_ck: dpll_dsp_m2_ck {
+	dpll_dsp_m2_ck: clock-dpll-dsp-m2-8@244 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_dsp_m2_ck";
 		clocks = <&dpll_dsp_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
 		reg = <0x0244>;
 		ti,index-starts-at-one;
 		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_dsp_m2_ck>;
+		assigned-clock-rates = <600000000>;
 	};
 
-	iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
+	iva_dpll_hs_clk_div: clock-iva-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_iva_byp_mux: dpll_iva_byp_mux {
+	dpll_iva_byp_mux: clock-dpll-iva-byp-mux-23@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_iva_byp_mux";
 		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x01ac>;
 	};
 
-	dpll_iva_ck: dpll_iva_ck {
+	dpll_iva_ck: clock@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_iva_ck";
 		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
+		assigned-clocks = <&dpll_iva_ck>;
+		assigned-clock-rates = <1165000000>;
 	};
 
-	dpll_iva_m2_ck: dpll_iva_m2_ck {
+	dpll_iva_m2_ck: clock-dpll-iva-m2-8@1b0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_iva_m2_ck";
 		clocks = <&dpll_iva_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
 		reg = <0x01b0>;
 		ti,index-starts-at-one;
 		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_iva_m2_ck>;
+		assigned-clock-rates = <388333334>;
 	};
 
-	iva_dclk: iva_dclk {
+	iva_dclk: clock-iva-dclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "iva_dclk";
 		clocks = <&dpll_iva_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_gpu_byp_mux: dpll_gpu_byp_mux {
+	dpll_gpu_byp_mux: clock-dpll-gpu-byp-mux-23@2e4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_gpu_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x02e4>;
 	};
 
-	dpll_gpu_ck: dpll_gpu_ck {
+	dpll_gpu_ck: clock@2d8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_gpu_ck";
 		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
+		assigned-clocks = <&dpll_gpu_ck>;
+		assigned-clock-rates = <1277000000>;
 	};
 
-	dpll_gpu_m2_ck: dpll_gpu_m2_ck {
+	dpll_gpu_m2_ck: clock-dpll-gpu-m2-8@2e8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gpu_m2_ck";
 		clocks = <&dpll_gpu_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
 		reg = <0x02e8>;
 		ti,index-starts-at-one;
 		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_gpu_m2_ck>;
+		assigned-clock-rates = <425666667>;
 	};
 
-	dpll_core_m2_ck: dpll_core_m2_ck {
+	dpll_core_m2_ck: clock-dpll-core-m2-8@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_m2_ck";
 		clocks = <&dpll_core_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -422,32 +497,36 @@
 		ti,invert-autoidle-bit;
 	};
 
-	core_dpll_out_dclk_div: core_dpll_out_dclk_div {
+	core_dpll_out_dclk_div: clock-core-dpll-out-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "core_dpll_out_dclk_div";
 		clocks = <&dpll_core_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_ddr_byp_mux: dpll_ddr_byp_mux {
+	dpll_ddr_byp_mux: clock-dpll-ddr-byp-mux-23@21c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_ddr_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x021c>;
 	};
 
-	dpll_ddr_ck: dpll_ddr_ck {
+	dpll_ddr_ck: clock@210 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_ddr_ck";
 		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
-	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+	dpll_ddr_m2_ck: clock-dpll-ddr-m2-8@220 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_m2_ck";
 		clocks = <&dpll_ddr_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -456,24 +535,27 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_byp_mux: dpll_gmac_byp_mux {
+	dpll_gmac_byp_mux: clock-dpll-gmac-byp-mux-23@2b4 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_gmac_byp_mux";
 		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
 		ti,bit-shift = <23>;
 		reg = <0x02b4>;
 	};
 
-	dpll_gmac_ck: dpll_gmac_ck {
+	dpll_gmac_ck: clock@2a8 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_gmac_ck";
 		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
-	dpll_gmac_m2_ck: dpll_gmac_m2_ck {
+	dpll_gmac_m2_ck: clock-dpll-gmac-m2-8@2b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_m2_ck";
 		clocks = <&dpll_gmac_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -482,72 +564,81 @@
 		ti,invert-autoidle-bit;
 	};
 
-	video2_dclk_div: video2_dclk_div {
+	video2_dclk_div: clock-video2-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_dclk_div";
 		clocks = <&video2_m2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video1_dclk_div: video1_dclk_div {
+	video1_dclk_div: clock-video1-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_dclk_div";
 		clocks = <&video1_m2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	hdmi_dclk_div: hdmi_dclk_div {
+	hdmi_dclk_div: clock-hdmi-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_dclk_div";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	per_dpll_hs_clk_div: per_dpll_hs_clk_div {
+	per_dpll_hs_clk_div: clock-per-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "per_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	usb_dpll_hs_clk_div: usb_dpll_hs_clk_div {
+	usb_dpll_hs_clk_div: clock-usb-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "usb_dpll_hs_clk_div";
 		clocks = <&dpll_abe_m3x2_ck>;
 		clock-mult = <1>;
 		clock-div = <3>;
 	};
 
-	eve_dpll_hs_clk_div: eve_dpll_hs_clk_div {
+	eve_dpll_hs_clk_div: clock-eve-dpll-hs-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "eve_dpll_hs_clk_div";
 		clocks = <&dpll_core_h12x2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_eve_byp_mux: dpll_eve_byp_mux {
+	dpll_eve_byp_mux: clock-dpll-eve-byp-mux-23@290 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_eve_byp_mux";
 		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x0290>;
 	};
 
-	dpll_eve_ck: dpll_eve_ck {
+	dpll_eve_ck: clock@284 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_eve_ck";
 		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
-	dpll_eve_m2_ck: dpll_eve_m2_ck {
+	dpll_eve_m2_ck: clock-dpll-eve-m2-8@294 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_eve_m2_ck";
 		clocks = <&dpll_eve_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -556,17 +647,19 @@
 		ti,invert-autoidle-bit;
 	};
 
-	eve_dclk_div: eve_dclk_div {
+	eve_dclk_div: clock-eve-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "eve_dclk_div";
 		clocks = <&dpll_eve_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_core_h13x2_ck: dpll_core_h13x2_ck {
+	dpll_core_h13x2_ck: clock-dpll-core-h13x2-8@140 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h13x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -575,9 +668,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h14x2_ck: dpll_core_h14x2_ck {
+	dpll_core_h14x2_ck: clock-dpll-core-h14x2-8@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h14x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -586,9 +680,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h22x2_ck: dpll_core_h22x2_ck {
+	dpll_core_h22x2_ck: clock-dpll-core-h22x2-8@154 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h22x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -597,9 +692,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h23x2_ck: dpll_core_h23x2_ck {
+	dpll_core_h23x2_ck: clock-dpll-core-h23x2-8@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h23x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -608,9 +704,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_core_h24x2_ck: dpll_core_h24x2_ck {
+	dpll_core_h24x2_ck: clock-dpll-core-h24x2-8@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_core_h24x2_ck";
 		clocks = <&dpll_core_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -619,15 +716,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+	dpll_ddr_x2_ck: clock-dpll-ddr-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_ddr_x2_ck";
 		clocks = <&dpll_ddr_ck>;
 	};
 
-	dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck {
+	dpll_ddr_h11x2_ck: clock-dpll-ddr-h11x2-8@228 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_ddr_h11x2_ck";
 		clocks = <&dpll_ddr_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -636,32 +735,38 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_dsp_x2_ck: dpll_dsp_x2_ck {
+	dpll_dsp_x2_ck: clock-dpll-dsp-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_dsp_x2_ck";
 		clocks = <&dpll_dsp_ck>;
 	};
 
-	dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck {
+	dpll_dsp_m3x2_ck: clock-dpll-dsp-m3x2-8@248 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_dsp_m3x2_ck";
 		clocks = <&dpll_dsp_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
 		reg = <0x0248>;
 		ti,index-starts-at-one;
 		ti,invert-autoidle-bit;
+		assigned-clocks = <&dpll_dsp_m3x2_ck>;
+		assigned-clock-rates = <400000000>;
 	};
 
-	dpll_gmac_x2_ck: dpll_gmac_x2_ck {
+	dpll_gmac_x2_ck: clock-dpll-gmac-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_gmac_x2_ck";
 		clocks = <&dpll_gmac_ck>;
 	};
 
-	dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck {
+	dpll_gmac_h11x2_ck: clock-dpll-gmac-h11x2-8@2c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h11x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -670,9 +775,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck {
+	dpll_gmac_h12x2_ck: clock-dpll-gmac-h12x2-8@2c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h12x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -681,9 +787,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck {
+	dpll_gmac_h13x2_ck: clock-dpll-gmac-h13x2-8@2c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_h13x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -692,9 +799,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck {
+	dpll_gmac_m3x2_ck: clock-dpll-gmac-m3x2-8@2bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_gmac_m3x2_ck";
 		clocks = <&dpll_gmac_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -703,33 +811,37 @@
 		ti,invert-autoidle-bit;
 	};
 
-	gmii_m_clk_div: gmii_m_clk_div {
+	gmii_m_clk_div: clock-gmii-m-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "gmii_m_clk_div";
 		clocks = <&dpll_gmac_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	hdmi_clk2_div: hdmi_clk2_div {
+	hdmi_clk2_div: clock-hdmi-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_clk2_div";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	hdmi_div_clk: hdmi_div_clk {
+	hdmi_div_clk: clock-hdmi-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "hdmi_div_clk";
 		clocks = <&hdmi_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	l3_iclk_div: l3_iclk_div {
+	l3_iclk_div: clock-l3-iclk-div-4@100 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3_iclk_div";
 		ti,max-div = <2>;
 		ti,bit-shift = <4>;
 		reg = <0x0100>;
@@ -737,469 +849,420 @@
 		ti,index-power-of-two;
 	};
 
-	l4_root_clk_div: l4_root_clk_div {
+	l4_root_clk_div: clock-l4-root-clk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "l4_root_clk_div";
 		clocks = <&l3_iclk_div>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	video1_clk2_div: video1_clk2_div {
+	video1_clk2_div: clock-video1-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_clk2_div";
 		clocks = <&video1_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video1_div_clk: video1_div_clk {
+	video1_div_clk: clock-video1-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video1_div_clk";
 		clocks = <&video1_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video2_clk2_div: video2_clk2_div {
+	video2_clk2_div: clock-video2-clk2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_clk2_div";
 		clocks = <&video2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	video2_div_clk: video2_div_clk {
+	video2_div_clk: clock-video2-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "video2_div_clk";
 		clocks = <&video2_clkin_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	ipu1_gfclk_mux: ipu1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0520>;
-	};
-
-	mcasp1_ahclkr_mux: mcasp1_ahclkr_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_ahclkx_mux: mcasp1_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x0550>;
-	};
-
-	mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x0550>;
-	};
-
-	timer5_gfclk_mux: timer5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0558>;
-	};
-
-	timer6_gfclk_mux: timer6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0560>;
-	};
-
-	timer7_gfclk_mux: timer7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0568>;
-	};
-
-	timer8_gfclk_mux: timer8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>;
-		ti,bit-shift = <24>;
-		reg = <0x0570>;
-	};
-
-	uart6_gfclk_mux: uart6_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0580>;
-	};
-
-	dummy_ck: dummy_ck {
+	dummy_ck: clock-dummy {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
+		clock-output-names = "dummy_ck";
 		clock-frequency = <0>;
 	};
 };
 &prm_clocks {
-	sys_clkin1: sys_clkin1 {
+	sys_clkin1: clock-sys-clkin1@110 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "sys_clkin1";
 		clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>;
 		reg = <0x0110>;
 		ti,index-starts-at-one;
 	};
 
-	abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux {
+	abe_dpll_sys_clk_mux: clock-abe-dpll-sys-clk-mux@118 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_sys_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0118>;
 	};
 
-	abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux {
+	abe_dpll_bypass_clk_mux: clock-abe-dpll-bypass-clk-mux@114 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_bypass_clk_mux";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x0114>;
 	};
 
-	abe_dpll_clk_mux: abe_dpll_clk_mux {
+	abe_dpll_clk_mux: clock-abe-dpll-clk-mux@10c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "abe_dpll_clk_mux";
 		clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>;
 		reg = <0x010c>;
 	};
 
-	abe_24m_fclk: abe_24m_fclk {
+	abe_24m_fclk: clock-abe-24m@11c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_24m_fclk";
 		clocks = <&dpll_abe_m2x2_ck>;
 		reg = <0x011c>;
 		ti,dividers = <8>, <16>;
 	};
 
-	aess_fclk: aess_fclk {
+	aess_fclk: clock-aess@178 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "aess_fclk";
 		clocks = <&abe_clk>;
 		reg = <0x0178>;
 		ti,max-div = <2>;
 	};
 
-	abe_giclk_div: abe_giclk_div {
+	abe_giclk_div: clock-abe-giclk-div@174 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_giclk_div";
 		clocks = <&aess_fclk>;
 		reg = <0x0174>;
 		ti,max-div = <2>;
 	};
 
-	abe_lp_clk_div: abe_lp_clk_div {
+	abe_lp_clk_div: clock-abe-lp-clk-div@1d8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_lp_clk_div";
 		clocks = <&dpll_abe_m2x2_ck>;
 		reg = <0x01d8>;
 		ti,dividers = <16>, <32>;
 	};
 
-	abe_sys_clk_div: abe_sys_clk_div {
+	abe_sys_clk_div: clock-abe-sys-clk-div@120 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "abe_sys_clk_div";
 		clocks = <&sys_clkin1>;
 		reg = <0x0120>;
 		ti,max-div = <2>;
 	};
 
-	adc_gfclk_mux: adc_gfclk_mux {
+	adc_gfclk_mux: clock-adc-gfclk-mux@1dc {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "adc_gfclk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>;
 		reg = <0x01dc>;
 	};
 
-	sys_clk1_dclk_div: sys_clk1_dclk_div {
+	sys_clk1_dclk_div: clock-sys-clk1-dclk-div@1c8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sys_clk1_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x01c8>;
 		ti,index-power-of-two;
 	};
 
-	sys_clk2_dclk_div: sys_clk2_dclk_div {
+	sys_clk2_dclk_div: clock-sys-clk2-dclk-div@1cc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sys_clk2_dclk_div";
 		clocks = <&sys_clkin2>;
 		ti,max-div = <64>;
 		reg = <0x01cc>;
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_dclk_div: per_abe_x1_dclk_div {
+	per_abe_x1_dclk_div: clock-per-abe-x1-dclk-div@1bc {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_x1_dclk_div";
 		clocks = <&dpll_abe_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01bc>;
 		ti,index-power-of-two;
 	};
 
-	dsp_gclk_div: dsp_gclk_div {
+	dsp_gclk_div: clock-dsp-gclk-div@18c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dsp_gclk_div";
 		clocks = <&dpll_dsp_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x018c>;
 		ti,index-power-of-two;
 	};
 
-	gpu_dclk: gpu_dclk {
+	gpu_dclk: clock-gpu-dclk@1a0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gpu_dclk";
 		clocks = <&dpll_gpu_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01a0>;
 		ti,index-power-of-two;
 	};
 
-	emif_phy_dclk_div: emif_phy_dclk_div {
+	emif_phy_dclk_div: clock-emif-phy-dclk-div@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "emif_phy_dclk_div";
 		clocks = <&dpll_ddr_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x0190>;
 		ti,index-power-of-two;
 	};
 
-	gmac_250m_dclk_div: gmac_250m_dclk_div {
+	gmac_250m_dclk_div: clock-gmac-250m-dclk-div@19c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "gmac_250m_dclk_div";
 		clocks = <&dpll_gmac_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x019c>;
 		ti,index-power-of-two;
 	};
 
-	l3init_480m_dclk_div: l3init_480m_dclk_div {
+	gmac_main_clk: clock-gmac-main {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clock-output-names = "gmac_main_clk";
+		clocks = <&gmac_250m_dclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l3init_480m_dclk_div: clock-l3init-480m-dclk-div@1ac {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_480m_dclk_div";
 		clocks = <&dpll_usb_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01ac>;
 		ti,index-power-of-two;
 	};
 
-	usb_otg_dclk_div: usb_otg_dclk_div {
+	usb_otg_dclk_div: clock-usb-otg-dclk-div@184 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "usb_otg_dclk_div";
 		clocks = <&usb_otg_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0184>;
 		ti,index-power-of-two;
 	};
 
-	sata_dclk_div: sata_dclk_div {
+	sata_dclk_div: clock-sata-dclk-div@1c0 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "sata_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x01c0>;
 		ti,index-power-of-two;
 	};
 
-	pcie2_dclk_div: pcie2_dclk_div {
+	pcie2_dclk_div: clock-pcie2-dclk-div@1b8 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "pcie2_dclk_div";
 		clocks = <&dpll_pcie_ref_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01b8>;
 		ti,index-power-of-two;
 	};
 
-	pcie_dclk_div: pcie_dclk_div {
+	pcie_dclk_div: clock-pcie-dclk-div@1b4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "pcie_dclk_div";
 		clocks = <&apll_pcie_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x01b4>;
 		ti,index-power-of-two;
 	};
 
-	emu_dclk_div: emu_dclk_div {
+	emu_dclk_div: clock-emu-dclk-div@194 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "emu_dclk_div";
 		clocks = <&sys_clkin1>;
 		ti,max-div = <64>;
 		reg = <0x0194>;
 		ti,index-power-of-two;
 	};
 
-	secure_32k_dclk_div: secure_32k_dclk_div {
+	secure_32k_dclk_div: clock-secure-32k-dclk-div@1c4 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "secure_32k_dclk_div";
 		clocks = <&secure_32k_clk_src_ck>;
 		ti,max-div = <64>;
 		reg = <0x01c4>;
 		ti,index-power-of-two;
 	};
 
-	clkoutmux0_clk_mux: clkoutmux0_clk_mux {
+	clkoutmux0_clk_mux: clock-clkoutmux0-clk-mux@158 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux0_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x0158>;
 	};
 
-	clkoutmux1_clk_mux: clkoutmux1_clk_mux {
+	clkoutmux1_clk_mux: clock-clkoutmux1-clk-mux@15c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux1_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x015c>;
 	};
 
-	clkoutmux2_clk_mux: clkoutmux2_clk_mux {
+	clkoutmux2_clk_mux: clock-clkoutmux2-clk-mux@160 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "clkoutmux2_clk_mux";
 		clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>;
 		reg = <0x0160>;
 	};
 
-	custefuse_sys_gfclk_div: custefuse_sys_gfclk_div {
+	custefuse_sys_gfclk_div: clock-custefuse-sys-gfclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "custefuse_sys_gfclk_div";
 		clocks = <&sys_clkin1>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	eve_clk: eve_clk {
+	eve_clk: clock-eve@180 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "eve_clk";
 		clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>;
 		reg = <0x0180>;
 	};
 
-	hdmi_dpll_clk_mux: hdmi_dpll_clk_mux {
+	hdmi_dpll_clk_mux: clock-hdmi-dpll-clk-mux@164 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "hdmi_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0164>;
 	};
 
-	mlb_clk: mlb_clk {
+	mlb_clk: clock-mlb@134 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "mlb_clk";
 		clocks = <&mlb_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0134>;
 		ti,index-power-of-two;
 	};
 
-	mlbp_clk: mlbp_clk {
+	mlbp_clk: clock-mlbp@130 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "mlbp_clk";
 		clocks = <&mlbp_clkin_ck>;
 		ti,max-div = <64>;
 		reg = <0x0130>;
 		ti,index-power-of-two;
 	};
 
-	per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div {
+	per_abe_x1_gfclk2_div: clock-per-abe-x1-gfclk2-div@138 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "per_abe_x1_gfclk2_div";
 		clocks = <&dpll_abe_m2_ck>;
 		ti,max-div = <64>;
 		reg = <0x0138>;
 		ti,index-power-of-two;
 	};
 
-	timer_sys_clk_div: timer_sys_clk_div {
+	timer_sys_clk_div: clock-timer-sys-clk-div@144 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "timer_sys_clk_div";
 		clocks = <&sys_clkin1>;
 		reg = <0x0144>;
 		ti,max-div = <2>;
 	};
 
-	video1_dpll_clk_mux: video1_dpll_clk_mux {
+	video1_dpll_clk_mux: clock-video1-dpll-clk-mux@168 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "video1_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x0168>;
 	};
 
-	video2_dpll_clk_mux: video2_dpll_clk_mux {
+	video2_dpll_clk_mux: clock-video2-dpll-clk-mux@16c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "video2_dpll_clk_mux";
 		clocks = <&sys_clkin1>, <&sys_clkin2>;
 		reg = <0x016c>;
 	};
 
-	wkupaon_iclk_mux: wkupaon_iclk_mux {
+	wkupaon_iclk_mux: clock-wkupaon-iclk-mux@108 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "wkupaon_iclk_mux";
 		clocks = <&sys_clkin1>, <&abe_lp_clk_div>;
 		reg = <0x0108>;
 	};
-
-	gpio1_dbclk: gpio1_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1838>;
-	};
-
-	dcan1_sys_clk_mux: dcan1_sys_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_clkin1>, <&sys_clkin2>;
-		ti,bit-shift = <24>;
-		reg = <0x1888>;
-	};
-
-	timer1_gfclk_mux: timer1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart10_gfclk_mux: uart10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1880>;
-	};
 };
+
 &cm_core_clocks {
-	dpll_pcie_ref_ck: dpll_pcie_ref_ck {
+	dpll_pcie_ref_ck: clock@200 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_pcie_ref_ck";
 		clocks = <&sys_clkin1>, <&sys_clkin1>;
 		reg = <0x0200>, <0x0204>, <0x020c>, <0x0208>;
 	};
 
-	dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck {
+	dpll_pcie_ref_m2ldo_ck: clock-dpll-pcie-ref-m2ldo-8@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_pcie_ref_m2ldo_ck";
 		clocks = <&dpll_pcie_ref_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1208,39 +1271,26 @@
 		ti,invert-autoidle-bit;
 	};
 
-	apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 {
+	apll_pcie_in_clk_mux: clock-apll-pcie-in-clk-mux-7@4ae06118 {
 		compatible = "ti,mux-clock";
+		clock-output-names = "apll_pcie_in_clk_mux";
 		clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c 0x4>;
 		ti,bit-shift = <7>;
 	};
 
-	apll_pcie_ck: apll_pcie_ck {
+	apll_pcie_ck: clock@21c {
 		#clock-cells = <0>;
 		compatible = "ti,dra7-apll-clock";
+		clock-output-names = "apll_pcie_ck";
 		clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>;
 		reg = <0x021c>, <0x0220>;
 	};
 
-	optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <8>;
-	};
-
-	optfclk_pciephy_div: optfclk_pciephy_div@4a00821c {
+	optfclk_pciephy_div: clock-optfclk-pciephy-div-8@4a00821c {
 		compatible = "ti,divider-clock";
+		clock-output-names = "optfclk_pciephy_div";
 		clocks = <&apll_pcie_ck>;
 		#clock-cells = <0>;
 		reg = <0x021c>;
@@ -1249,80 +1299,54 @@
 		ti,max-div = <2>;
 	};
 
-	optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&apll_pcie_ck>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <9>;
-	};
-
-	optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b0>;
-		ti,bit-shift = <10>;
-	};
-
-	optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 {
-		compatible = "ti,gate-clock";
-		clocks = <&optfclk_pciephy_div>;
-		#clock-cells = <0>;
-		reg = <0x13b8>;
-		ti,bit-shift = <10>;
-	};
-
-	apll_pcie_clkvcoldo: apll_pcie_clkvcoldo {
+	apll_pcie_clkvcoldo: clock-apll-pcie-clkvcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_clkvcoldo";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div {
+	apll_pcie_clkvcoldo_div: clock-apll-pcie-clkvcoldo-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_clkvcoldo_div";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	apll_pcie_m2_ck: apll_pcie_m2_ck {
+	apll_pcie_m2_ck: clock-apll-pcie-m2 {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "apll_pcie_m2_ck";
 		clocks = <&apll_pcie_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_per_byp_mux: dpll_per_byp_mux {
+	dpll_per_byp_mux: clock-dpll-per-byp-mux-23@14c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_per_byp_mux";
 		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x014c>;
 	};
 
-	dpll_per_ck: dpll_per_ck {
+	dpll_per_ck: clock@140 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
+		clock-output-names = "dpll_per_ck";
 		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
-	dpll_per_m2_ck: dpll_per_m2_ck {
+	dpll_per_m2_ck: clock-dpll-per-m2-8@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2_ck";
 		clocks = <&dpll_per_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1331,32 +1355,36 @@
 		ti,invert-autoidle-bit;
 	};
 
-	func_96m_aon_dclk_div: func_96m_aon_dclk_div {
+	func_96m_aon_dclk_div: clock-func-96m-aon-dclk-div {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_aon_dclk_div";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	dpll_usb_byp_mux: dpll_usb_byp_mux {
+	dpll_usb_byp_mux: clock-dpll-usb-byp-mux-23@18c {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "dpll_usb_byp_mux";
 		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
 		ti,bit-shift = <23>;
 		reg = <0x018c>;
 	};
 
-	dpll_usb_ck: dpll_usb_ck {
+	dpll_usb_ck: clock@180 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
+		clock-output-names = "dpll_usb_ck";
 		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 
-	dpll_usb_m2_ck: dpll_usb_m2_ck {
+	dpll_usb_m2_ck: clock-dpll-usb-m2-8@190 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_usb_m2_ck";
 		clocks = <&dpll_usb_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -1365,9 +1393,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck {
+	dpll_pcie_ref_m2_ck: clock-dpll-pcie-ref-m2-8@210 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_pcie_ref_m2_ck";
 		clocks = <&dpll_pcie_ref_ck>;
 		ti,max-div = <127>;
 		ti,autoidle-shift = <8>;
@@ -1376,15 +1405,17 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_x2_ck: dpll_per_x2_ck {
+	dpll_per_x2_ck: clock-dpll-per-x2 {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-x2-clock";
+		clock-output-names = "dpll_per_x2_ck";
 		clocks = <&dpll_per_ck>;
 	};
 
-	dpll_per_h11x2_ck: dpll_per_h11x2_ck {
+	dpll_per_h11x2_ck: clock-dpll-per-h11x2-8@158 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h11x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1393,9 +1424,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h12x2_ck: dpll_per_h12x2_ck {
+	dpll_per_h12x2_ck: clock-dpll-per-h12x2-8@15c {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h12x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1404,9 +1436,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h13x2_ck: dpll_per_h13x2_ck {
+	dpll_per_h13x2_ck: clock-dpll-per-h13x2-8@160 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h13x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1415,9 +1448,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_h14x2_ck: dpll_per_h14x2_ck {
+	dpll_per_h14x2_ck: clock-dpll-per-h14x2-8@164 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_h14x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <63>;
 		ti,autoidle-shift = <8>;
@@ -1426,9 +1460,10 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_per_m2x2_ck: dpll_per_m2x2_ck {
+	dpll_per_m2x2_ck: clock-dpll-per-m2x2-8@150 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "dpll_per_m2x2_ck";
 		clocks = <&dpll_per_x2_ck>;
 		ti,max-div = <31>;
 		ti,autoidle-shift = <8>;
@@ -1437,713 +1472,623 @@
 		ti,invert-autoidle-bit;
 	};
 
-	dpll_usb_clkdcoldo: dpll_usb_clkdcoldo {
+	dpll_usb_clkdcoldo: clock-dpll-usb-clkdcoldo {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "dpll_usb_clkdcoldo";
 		clocks = <&dpll_usb_ck>;
 		clock-mult = <1>;
 		clock-div = <1>;
 	};
 
-	func_128m_clk: func_128m_clk {
+	func_128m_clk: clock-func-128m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_128m_clk";
 		clocks = <&dpll_per_h11x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	func_12m_fclk: func_12m_fclk {
+	func_12m_fclk: clock-func-12m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_12m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <16>;
 	};
 
-	func_24m_clk: func_24m_clk {
+	func_24m_clk: clock-func-24m {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_24m_clk";
 		clocks = <&dpll_per_m2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	func_48m_fclk: func_48m_fclk {
+	func_48m_fclk: clock-func-48m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_48m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <4>;
 	};
 
-	func_96m_fclk: func_96m_fclk {
+	func_96m_fclk: clock-func-96m-fclk {
 		#clock-cells = <0>;
 		compatible = "fixed-factor-clock";
+		clock-output-names = "func_96m_fclk";
 		clocks = <&dpll_per_m2x2_ck>;
 		clock-mult = <1>;
 		clock-div = <2>;
 	};
 
-	l3init_60m_fclk: l3init_60m_fclk {
+	l3init_60m_fclk: clock-l3init-60m@104 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3init_60m_fclk";
 		clocks = <&dpll_usb_m2_ck>;
 		reg = <0x0104>;
 		ti,dividers = <1>, <8>;
 	};
 
-	clkout2_clk: clkout2_clk {
+	clkout2_clk: clock-clkout2-8@6b0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "clkout2_clk";
 		clocks = <&clkoutmux2_clk_mux>;
 		ti,bit-shift = <8>;
 		reg = <0x06b0>;
 	};
 
-	l3init_960m_gfclk: l3init_960m_gfclk {
+	l3init_960m_gfclk: clock-l3init-960m-gfclk-8@6c0 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "l3init_960m_gfclk";
 		clocks = <&dpll_usb_clkdcoldo>;
 		ti,bit-shift = <8>;
 		reg = <0x06c0>;
 	};
 
-	dss_32khz_clk: dss_32khz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <11>;
-		reg = <0x1120>;
-	};
-
-	dss_48mhz_clk: dss_48mhz_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&func_48m_fclk>;
-		ti,bit-shift = <9>;
-		reg = <0x1120>;
-	};
-
-	dss_dss_clk: dss_dss_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&dpll_per_h12x2_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1120>;
-		ti,set-rate-parent;
-	};
-
-	dss_hdmi_clk: dss_hdmi_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&hdmi_dpll_clk_mux>;
-		ti,bit-shift = <10>;
-		reg = <0x1120>;
-	};
-
-	dss_video1_clk: dss_video1_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video1_dpll_clk_mux>;
-		ti,bit-shift = <12>;
-		reg = <0x1120>;
-	};
-
-	dss_video2_clk: dss_video2_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&video2_dpll_clk_mux>;
-		ti,bit-shift = <13>;
-		reg = <0x1120>;
-	};
-
-	gpio2_dbclk: gpio2_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1760>;
-	};
-
-	gpio3_dbclk: gpio3_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1768>;
-	};
-
-	gpio4_dbclk: gpio4_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1770>;
-	};
-
-	gpio5_dbclk: gpio5_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1778>;
-	};
-
-	gpio6_dbclk: gpio6_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1780>;
-	};
-
-	gpio7_dbclk: gpio7_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1810>;
-	};
-
-	gpio8_dbclk: gpio8_dbclk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1818>;
-	};
-
-	mmc1_clk32k: mmc1_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1328>;
-	};
-
-	mmc2_clk32k: mmc2_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1330>;
-	};
-
-	mmc3_clk32k: mmc3_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1820>;
-	};
-
-	mmc4_clk32k: mmc4_clk32k {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_32k_ck>;
-		ti,bit-shift = <8>;
-		reg = <0x1828>;
-	};
-
-	sata_ref_clk: sata_ref_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&sys_clkin1>;
-		ti,bit-shift = <8>;
-		reg = <0x1388>;
-	};
-
-	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x13f0>;
-	};
-
-	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3init_960m_gfclk>;
-		ti,bit-shift = <8>;
-		reg = <0x1340>;
-	};
-
-	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+	usb_phy1_always_on_clk32k: clock-usb-phy1-always-on-clk32k-8@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy1_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0640>;
 	};
 
-	usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k {
+	usb_phy2_always_on_clk32k: clock-usb-phy2-always-on-clk32k-8@688 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy2_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0688>;
 	};
 
-	usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k {
+	usb_phy3_always_on_clk32k: clock-usb-phy3-always-on-clk32k-8@698 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
+		clock-output-names = "usb_phy3_always_on_clk32k";
 		clocks = <&sys_32k_ck>;
 		ti,bit-shift = <8>;
 		reg = <0x0698>;
 	};
 
-	atl_dpll_clk_mux: atl_dpll_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x0c00>;
-	};
-
-	atl_gfclk_mux: atl_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>;
-		ti,bit-shift = <26>;
-		reg = <0x0c00>;
-	};
-
-	gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&dpll_gmac_m2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x13d0>;
-		ti,dividers = <2>;
-	};
-
-	gmac_rft_clk_mux: gmac_rft_clk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>;
-		ti,bit-shift = <25>;
-		reg = <0x13d0>;
-	};
-
-	gpu_core_gclk_mux: gpu_core_gclk_mux {
+	gpu_core_gclk_mux: clock-gpu-core-gclk-mux-24@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_core_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
 		ti,bit-shift = <24>;
 		reg = <0x1220>;
+		assigned-clocks = <&gpu_core_gclk_mux>;
+		assigned-clock-parents = <&dpll_gpu_m2_ck>;
 	};
 
-	gpu_hyd_gclk_mux: gpu_hyd_gclk_mux {
+	gpu_hyd_gclk_mux: clock-gpu-hyd-gclk-mux-26@1220 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
+		clock-output-names = "gpu_hyd_gclk_mux";
 		clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>;
 		ti,bit-shift = <26>;
 		reg = <0x1220>;
+		assigned-clocks = <&gpu_hyd_gclk_mux>;
+		assigned-clock-parents = <&dpll_gpu_m2_ck>;
 	};
 
-	l3instr_ts_gclk_div: l3instr_ts_gclk_div {
+	l3instr_ts_gclk_div: clock-l3instr-ts-gclk-div-24@e50 {
 		#clock-cells = <0>;
 		compatible = "ti,divider-clock";
+		clock-output-names = "l3instr_ts_gclk_div";
 		clocks = <&wkupaon_iclk_mux>;
 		ti,bit-shift = <24>;
 		reg = <0x0e50>;
 		ti,dividers = <8>, <16>, <32>;
 	};
 
-	mcasp2_ahclkr_mux: mcasp2_ahclkr_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <28>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_ahclkx_mux: mcasp2_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1860>;
-	};
-
-	mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1860>;
-	};
-
-	mcasp3_ahclkx_mux: mcasp3_ahclkx_mux {
+	vip1_gclk_mux: clock-vip1-gclk-mux-24@1020 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clock-output-names = "vip1_gclk_mux";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
-		reg = <0x1868>;
-	};
-
-	mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1868>;
+		reg = <0x1020>;
 	};
 
-	mcasp4_ahclkx_mux: mcasp4_ahclkx_mux {
+	vip2_gclk_mux: clock-vip2-gclk-mux-24@1028 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clock-output-names = "vip2_gclk_mux";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
-		reg = <0x1898>;
-	};
-
-	mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1898>;
+		reg = <0x1028>;
 	};
 
-	mcasp5_ahclkx_mux: mcasp5_ahclkx_mux {
+	vip3_gclk_mux: clock-vip3-gclk-mux-24@1030 {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		clock-output-names = "vip3_gclk_mux";
+		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
 		ti,bit-shift = <24>;
-		reg = <0x1878>;
-	};
-
-	mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1878>;
+		reg = <0x1030>;
 	};
+};
 
-	mcasp6_ahclkx_mux: mcasp6_ahclkx_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1904>;
+&cm_core_clockdomains {
+	coreaon_clkdm: clock-coreaon-clkdm {
+		compatible = "ti,clockdomain";
+		clock-output-names = "coreaon_clkdm";
+		clocks = <&dpll_usb_ck>;
 	};
+};
 
-	mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux {
+&scm_conf_clocks {
+	dss_deshdcp_clk: clock-dss-deshdcp-0@558 {
 		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1904>;
+		compatible = "ti,gate-clock";
+		clock-output-names = "dss_deshdcp_clk";
+		clocks = <&l3_iclk_div>;
+		ti,bit-shift = <0>;
+		reg = <0x558>;
 	};
 
-	mcasp7_ahclkx_mux: mcasp7_ahclkx_mux {
+       ehrpwm0_tbclk: clock-ehrpwm0-tbclk-20@558 {
 		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1908>;
+		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm0_tbclk";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <20>;
+		reg = <0x0558>;
 	};
 
-	mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux {
+	ehrpwm1_tbclk: clock-ehrpwm1-tbclk-21@558 {
 		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <22>;
-		reg = <0x1908>;
+		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm1_tbclk";
+		clocks = <&l4_root_clk_div>;
+		ti,bit-shift = <21>;
+		reg = <0x0558>;
 	};
 
-	mcasp8_ahclk_mux: mcasp8_ahclk_mux {
+	ehrpwm2_tbclk: clock-ehrpwm2-tbclk-22@558 {
 		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atl_clkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>;
+		compatible = "ti,gate-clock";
+		clock-output-names = "ehrpwm2_tbclk";
+		clocks = <&l4_root_clk_div>;
 		ti,bit-shift = <22>;
-		reg = <0x1890>;
-	};
-
-	mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>;
-		ti,bit-shift = <24>;
-		reg = <0x1890>;
-	};
-
-	mmc1_fclk_mux: mmc1_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1328>;
-	};
-
-	mmc1_fclk_div: mmc1_fclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc1_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1328>;
-		ti,index-power-of-two;
-	};
-
-	mmc2_fclk_mux: mmc2_fclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1330>;
-	};
-
-	mmc2_fclk_div: mmc2_fclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc2_fclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1330>;
-		ti,index-power-of-two;
-	};
-
-	mmc3_gfclk_mux: mmc3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1820>;
-	};
-
-	mmc3_gfclk_div: mmc3_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc3_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1820>;
-		ti,index-power-of-two;
-	};
-
-	mmc4_gfclk_mux: mmc4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1828>;
-	};
-
-	mmc4_gfclk_div: mmc4_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&mmc4_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1828>;
-		ti,index-power-of-two;
-	};
-
-	qspi_gfclk_mux: qspi_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1838>;
-	};
-
-	qspi_gfclk_div: qspi_gfclk_div {
-		#clock-cells = <0>;
-		compatible = "ti,divider-clock";
-		clocks = <&qspi_gfclk_mux>;
-		ti,bit-shift = <25>;
-		ti,max-div = <4>;
-		reg = <0x1838>;
-		ti,index-power-of-two;
-	};
-
-	timer10_gfclk_mux: timer10_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1728>;
-	};
-
-	timer11_gfclk_mux: timer11_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1730>;
-	};
-
-	timer13_gfclk_mux: timer13_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17c8>;
-	};
-
-	timer14_gfclk_mux: timer14_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d0>;
-	};
-
-	timer15_gfclk_mux: timer15_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x17d8>;
-	};
-
-	timer16_gfclk_mux: timer16_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1830>;
-	};
-
-	timer2_gfclk_mux: timer2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1738>;
-	};
-
-	timer3_gfclk_mux: timer3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1740>;
-	};
-
-	timer4_gfclk_mux: timer4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1748>;
-	};
-
-	timer9_gfclk_mux: timer9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>;
-		ti,bit-shift = <24>;
-		reg = <0x1750>;
-	};
-
-	uart1_gfclk_mux: uart1_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1840>;
-	};
-
-	uart2_gfclk_mux: uart2_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1848>;
-	};
-
-	uart3_gfclk_mux: uart3_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1850>;
-	};
-
-	uart4_gfclk_mux: uart4_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1858>;
-	};
-
-	uart5_gfclk_mux: uart5_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1870>;
-	};
-
-	uart7_gfclk_mux: uart7_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18d0>;
-	};
-
-	uart8_gfclk_mux: uart8_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e0>;
-	};
-
-	uart9_gfclk_mux: uart9_gfclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x18e8>;
+		reg = <0x0558>;
 	};
 
-	vip1_gclk_mux: vip1_gclk_mux {
+	sys_32k_ck: clock-sys-32k {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1020>;
+		clock-output-names = "sys_32k_ck";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
 	};
+};
 
-	vip2_gclk_mux: vip2_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1028>;
+&cm_core_aon {
+	mpu_cm: clock@300 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "mpu_cm";
+		reg = <0x300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x300 0x100>;
+
+		mpu_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "mpu_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	dsp1_cm: clock@400 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp1_cm";
+		reg = <0x400 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x400 0x100>;
+
+		dsp1_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "dsp1_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	ipu_cm: clock@500 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu_cm";
+		reg = <0x500 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x500 0x100>;
+
+		ipu1_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "ipu1_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+			assigned-clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 24>;
+			assigned-clock-parents = <&dpll_core_h22x2_ck>;
+		};
+
+		ipu_clkctrl: clock@50 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "ipu_clkctrl";
+			reg = <0x50 0x34>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	dsp2_cm: clock@600 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "dsp2_cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		dsp2_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "dsp2_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	rtc_cm: clock@700 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "rtc_cm";
+		reg = <0x700 0x60>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x60>;
+
+		rtc_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "rtc_clkctrl";
+			reg = <0x20 0x28>;
+			#clock-cells = <2>;
+		};
+	};
+
+	vpe_cm: clock@760 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "vpe_cm";
+		reg = <0x760 0xc>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x760 0xc>;
+
+		vpe_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "vpe_clkctrl";
+			reg = <0x0 0xc>;
+			#clock-cells = <2>;
+		};
 	};
 
-	vip3_gclk_mux: vip3_gclk_mux {
-		#clock-cells = <0>;
-		compatible = "ti,mux-clock";
-		clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>;
-		ti,bit-shift = <24>;
-		reg = <0x1030>;
-	};
 };
 
-&cm_core_clockdomains {
-	coreaon_clkdm: coreaon_clkdm {
-		compatible = "ti,clockdomain";
-		clocks = <&dpll_usb_ck>;
+&cm_core {
+	coreaon_cm: clock@600 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "coreaon_cm";
+		reg = <0x600 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x600 0x100>;
+
+		coreaon_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "coreaon_clkctrl";
+			reg = <0x20 0x1c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3main1_cm: clock@700 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l3main1_cm";
+		reg = <0x700 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x700 0x100>;
+
+		l3main1_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3main1_clkctrl";
+			reg = <0x20 0x74>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	ipu2_cm: clock@900 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "ipu2_cm";
+		reg = <0x900 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x900 0x100>;
+
+		ipu2_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "ipu2_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	dma_cm: clock@a00 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "dma_cm";
+		reg = <0xa00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xa00 0x100>;
+
+		dma_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "dma_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	emif_cm: clock@b00 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "emif_cm";
+		reg = <0xb00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xb00 0x100>;
+
+		emif_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "emif_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	atl_cm: clock@c00 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "atl_cm";
+		reg = <0xc00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xc00 0x100>;
+
+		atl_clkctrl: clock@0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "atl_clkctrl";
+			reg = <0x0 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l4cfg_cm: clock@d00 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l4cfg_cm";
+		reg = <0xd00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xd00 0x100>;
+
+		l4cfg_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4cfg_clkctrl";
+			reg = <0x20 0x84>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3instr_cm: clock@e00 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l3instr_cm";
+		reg = <0xe00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xe00 0x100>;
+
+		l3instr_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3instr_clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	iva_cm: clock@f00 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "iva_cm";
+		reg = <0xf00 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xf00 0x100>;
+
+		iva_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "iva_clkctrl";
+			reg = <0x20 0xc>;
+			#clock-cells = <2>;
+		};
+	};
+
+	cam_cm: clock@1000 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "cam_cm";
+		reg = <0x1000 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000 0x100>;
+
+		cam_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "cam_clkctrl";
+			reg = <0x20 0x2c>;
+			#clock-cells = <2>;
+		};
+	};
+
+	dss_cm: clock@1100 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "dss_cm";
+		reg = <0x1100 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1100 0x100>;
+
+		dss_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "dss_clkctrl";
+			reg = <0x20 0x14>;
+			#clock-cells = <2>;
+		};
+	};
+
+	gpu_cm: clock@1200 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "gpu_cm";
+		reg = <0x1200 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1200 0x100>;
+
+		gpu_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "gpu_clkctrl";
+			reg = <0x20 0x4>;
+			#clock-cells = <2>;
+		};
+	};
+
+	l3init_cm: clock@1300 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l3init_cm";
+		reg = <0x1300 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1300 0x100>;
+
+		l3init_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l3init_clkctrl";
+			reg = <0x20 0x6c>, <0xe0 0x14>;
+			#clock-cells = <2>;
+		};
+
+		pcie_clkctrl: clock@b0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "pcie_clkctrl";
+			reg = <0xb0 0xc>;
+			#clock-cells = <2>;
+		};
+
+		gmac_clkctrl: clock@d0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "gmac_clkctrl";
+			reg = <0xd0 0x4>;
+			#clock-cells = <2>;
+		};
+
+	};
+
+	l4per_cm: clock@1700 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "l4per_cm";
+		reg = <0x1700 0x300>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1700 0x300>;
+
+		l4per_clkctrl: clock@28 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4per_clkctrl";
+			reg = <0x28 0x64>, <0xa0 0x24>, <0xf0 0x3c>, <0x140 0x1c>, <0x170 0x4>;
+			#clock-cells = <2>;
+
+			assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
+			assigned-clock-parents = <&abe_24m_fclk>;
+		};
+
+		l4sec_clkctrl: clock@1a0 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4sec_clkctrl";
+			reg = <0x1a0 0x2c>;
+			#clock-cells = <2>;
+		};
+
+		l4per2_clkctrl: clock@c {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4per2_clkctrl";
+			reg = <0xc 0x4>, <0x18 0xc>, <0x90 0xc>, <0xc4 0x4>, <0x138 0x4>, <0x160 0xc>, <0x178 0x24>, <0x1d0 0x3c>;
+			#clock-cells = <2>;
+		};
+
+		l4per3_clkctrl: clock@14 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "l4per3_clkctrl";
+			reg = <0x14 0x4>, <0xc8 0x14>, <0x130 0x4>;
+			#clock-cells = <2>;
+		};
 	};
+
 };
 
-&scm_conf_clocks {
-	dss_deshdcp_clk: dss_deshdcp_clk {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_iclk_div>;
-		ti,bit-shift = <0>;
-		reg = <0x558>;
+&prm {
+	wkupaon_cm: clock@1800 {
+		compatible = "ti,omap4-cm";
+		clock-output-names = "wkupaon_cm";
+		reg = <0x1800 0x100>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1800 0x100>;
+
+		wkupaon_clkctrl: clock@20 {
+			compatible = "ti,clkctrl";
+			clock-output-names = "wkupaon_clkctrl";
+			reg = <0x20 0x6c>;
+			#clock-cells = <2>;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
new file mode 100644
index 000000000000..dd03e3860f97
--- /dev/null
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E60K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "e60k02:white:on";
+			gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			/* IR_3V3 */
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	/* J4, through-hole */
+	status = "okay";
+};
+
+&uart4 {
+	/* TP198, next to J4, SMD pads */
+	status = "okay";
+};
+
+&usdhc2 {
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/e70k02.dtsi b/arch/arm/boot/dts/e70k02.dtsi
new file mode 100644
index 000000000000..4e1bf080eaca
--- /dev/null
+++ b/arch/arm/boot/dts/e70k02.dtsi
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Andreas Kemnade
+ * based on works
+ * Copyright 2016 Freescale Semiconductor, Inc.
+ * and
+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
+ *
+ * Netronix E70K02 board common.
+ * This board is equipped with different SoCs and
+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
+ * the Tolino Shine 3 (with i.MX6SL)
+ */
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc3;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-cover {
+			label = "Cover";
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			linux,code = <SW_LID>;
+			linux,input-type = <EV_SW>;
+			wakeup-source;
+		};
+
+		key-pageup {
+			label = "PageUp";
+			gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEUP>;
+		};
+
+		key-pagedown {
+			label = "PageDown";
+			gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PAGEDOWN>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+
+		led {
+			label = "e70k02:white:on";
+			gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "timer";
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		regulator-name = "SD3_SPWR";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <20>;
+		reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	lm3630a: backlight@36 {
+		reg = <0x36>;
+		compatible = "ti,lm3630a";
+		enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@0 {
+			reg = <0>;
+			led-sources = <0>;
+			label = "backlight_warm";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+
+		led@1 {
+			reg = <1>;
+			led-sources = <1>;
+			label = "backlight_cold";
+			default-brightness = <0>;
+			max-brightness = <255>;
+		};
+	};
+
+	/* TODO: KX122 acceleration sensor a 0x1e */
+
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@24 {
+		compatible = "cypress,tt21000";
+		reg = <0x24>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio4 18 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&ldo5_reg>;
+	};
+
+	/* TODO: SY7636 PMIC for E Ink at 0x62 */
+
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	ricoh619: pmic@32 {
+		compatible = "ricoh,rc5t619";
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		system-power-controller;
+
+		regulators {
+			dcdc1_reg: DCDC1 {
+				regulator-name = "DCDC1";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <900000>;
+					regulator-suspend-min-microvolt = <900000>;
+				};
+			};
+
+			/* Core3_3V3 */
+			dcdc2_reg: DCDC2 {
+				regulator-name = "DCDC2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3300000>;
+					regulator-suspend-min-microvolt = <3300000>;
+				};
+			};
+
+			dcdc3_reg: DCDC3 {
+				regulator-name = "DCDC3";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V2 */
+			dcdc4_reg: DCDC4 {
+				regulator-name = "DCDC4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1140000>;
+					regulator-suspend-min-microvolt = <1140000>;
+				};
+			};
+
+			/* Core4_1V8 */
+			dcdc5_reg: DCDC5 {
+				regulator-name = "DCDC5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <1700000>;
+					regulator-suspend-min-microvolt = <1700000>;
+				};
+			};
+
+			ldo1_reg: LDO1  {
+				regulator-name = "LDO1";
+				regulator-boot-on;
+			};
+
+			/* Core1_3V3 */
+			ldo2_reg: LDO2  {
+				regulator-name = "LDO2";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-max-microvolt = <3000000>;
+					regulator-suspend-min-microvolt = <3000000>;
+				};
+			};
+
+			/* Core5_1V2 */
+			ldo3_reg: LDO3  {
+				regulator-name = "LDO3";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-boot-on;
+			};
+
+			/* SPD_3V3 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* DDR_0V6 */
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* VDD_PWM */
+			ldo7_reg: LDO7 {
+				regulator-name = "LDO7";
+				regulator-boot-on;
+			};
+
+			/* ldo_1v8 */
+			ldo8_reg: LDO8 {
+				regulator-name = "LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "LDO9";
+				regulator-boot-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "LDO10";
+				regulator-boot-on;
+			};
+
+			ldortc1_reg: LDORTC1  {
+				regulator-name = "LDORTC1";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&snvs_rtc {
+	/* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
+	status = "disabled";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&usdhc1 {
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	vmmc-supply = <&reg_wifi>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	cap-power-off-card;
+	non-removable;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg1>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts
deleted file mode 100644
index a4ba31b23c88..000000000000
--- a/arch/arm/boot/dts/ea3250.dts
+++ /dev/null
@@ -1,281 +0,0 @@
-/*
- * Embedded Artists LPC3250 board
- *
- * Copyright 2012 Roland Stigge <stigge@antcom.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "lpc32xx.dtsi"
-
-/ {
-	model = "Embedded Artists LPC3250 board based on NXP LPC3250";
-	compatible = "ea,ea3250", "nxp,lpc3250";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	memory {
-		device_type = "memory";
-		reg = <0 0x4000000>;
-	};
-
-	ahb {
-		mac: ethernet@31060000 {
-			phy-mode = "rmii";
-			use-iram;
-		};
-
-		/* Here, choose exactly one from: ohci, usbd */
-		ohci@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-
-/*
-		usbd@31020000 {
-			transceiver = <&isp1301>;
-			status = "okay";
-		};
-*/
-
-		/* 128MB Flash via SLC NAND controller */
-		slc: flash@20020000 {
-			status = "okay";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			nxp,wdr-clks = <14>;
-			nxp,wwidth = <260000000>;
-			nxp,whold = <104000000>;
-			nxp,wsetup = <200000000>;
-			nxp,rdr-clks = <14>;
-			nxp,rwidth = <34666666>;
-			nxp,rhold = <104000000>;
-			nxp,rsetup = <200000000>;
-			nand-on-flash-bbt;
-			gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */
-
-			mtd0@00000000 {
-				label = "ea3250-boot";
-				reg = <0x00000000 0x00080000>;
-				read-only;
-			};
-
-			mtd1@00080000 {
-				label = "ea3250-uboot";
-				reg = <0x00080000 0x000c0000>;
-				read-only;
-			};
-
-			mtd2@00140000 {
-				label = "ea3250-kernel";
-				reg = <0x00140000 0x00400000>;
-			};
-
-			mtd3@00540000 {
-				label = "ea3250-rootfs";
-				reg = <0x00540000 0x07ac0000>;
-			};
-		};
-
-		apb {
-			uart5: serial@40090000 {
-				status = "okay";
-			};
-
-			uart3: serial@40080000 {
-				status = "okay";
-			};
-
-			uart6: serial@40098000 {
-				status = "okay";
-			};
-
-			i2c1: i2c@400A0000 {
-				clock-frequency = <100000>;
-
-				eeprom@50 {
-					compatible = "at,24c256";
-					reg = <0x50>;
-				};
-
-				eeprom@57 {
-					compatible = "at,24c64";
-					reg = <0x57>;
-				};
-
-				uda1380: uda1380@18 {
-					compatible = "nxp,uda1380";
-					reg = <0x18>;
-					power-gpio = <&gpio 0x59 0>;
-					reset-gpio = <&gpio 0x51 0>;
-					dac-clk = "wspll";
-				};
-
-				pca9532: pca9532@60 {
-					compatible = "nxp,pca9532";
-					gpio-controller;
-					#gpio-cells = <2>;
-					reg = <0x60>;
-				};
-			};
-
-			i2c2: i2c@400A8000 {
-				clock-frequency = <100000>;
-			};
-
-			i2cusb: i2c@31020300 {
-				clock-frequency = <100000>;
-
-				isp1301: usb-transceiver@2d {
-					compatible = "nxp,isp1301";
-					reg = <0x2d>;
-				};
-			};
-
-			sd@20098000 {
-				wp-gpios = <&pca9532 5 0>;
-				cd-gpios = <&pca9532 4 0>;
-				cd-inverted;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		fab {
-			uart1: serial@40014000 {
-				status = "okay";
-			};
-
-			/* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */
-			adc@40048000 {
-				status = "okay";
-			};
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-		button@21 {
-			label = "Interrupt Key";
-			linux,code = <103>;
-			gpios = <&gpio 4 1 0>; /* GPI_P3 1 */
-		};
-		key1 {
-			label = "KEY1";
-			linux,code = <1>;
-			gpios = <&pca9532 0 0>;
-		};
-		key2 {
-			label = "KEY2";
-			linux,code = <2>;
-			gpios = <&pca9532 1 0>;
-		};
-		key3 {
-			label = "KEY3";
-			linux,code = <3>;
-			gpios = <&pca9532 2 0>;
-		};
-		key4 {
-			label = "KEY4";
-			linux,code = <4>;
-			gpios = <&pca9532 3 0>;
-		};
-		joy0 {
-			label = "Joystick Key 0";
-			linux,code = <10>;
-			gpios = <&gpio 2 0 0>; /* P2.0 */
-		};
-		joy1 {
-			label = "Joystick Key 1";
-			linux,code = <11>;
-			gpios = <&gpio 2 1 0>; /* P2.1 */
-		};
-		joy2 {
-			label = "Joystick Key 2";
-			linux,code = <12>;
-			gpios = <&gpio 2 2 0>; /* P2.2 */
-		};
-		joy3 {
-			label = "Joystick Key 3";
-			linux,code = <13>;
-			gpios = <&gpio 2 3 0>; /* P2.3 */
-		};
-		joy4 {
-			label = "Joystick Key 4";
-			linux,code = <14>;
-			gpios = <&gpio 2 4 0>; /* P2.4 */
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		/* LEDs on OEM Board */
-
-		led1 {
-			gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */
-			linux,default-trigger = "timer";
-			default-state = "off";
-		};
-
-		led2 {
-			gpios = <&gpio 2 10 1>; /* P2.10, active low */
-			default-state = "off";
-		};
-
-		led3 {
-			gpios = <&gpio 2 11 1>; /* P2.11, active low */
-			default-state = "off";
-		};
-
-		led4 {
-			gpios = <&gpio 2 12 1>; /* P2.12, active low */
-			default-state = "off";
-		};
-
-		/* LEDs on Base Board */
-
-		lede1 {
-			gpios = <&pca9532 8 0>;
-			default-state = "off";
-		};
-		lede2 {
-			gpios = <&pca9532 9 0>;
-			default-state = "off";
-		};
-		lede3 {
-			gpios = <&pca9532 10 0>;
-			default-state = "off";
-		};
-		lede4 {
-			gpios = <&pca9532 11 0>;
-			default-state = "off";
-		};
-		lede5 {
-			gpios = <&pca9532 12 0>;
-			default-state = "off";
-		};
-		lede6 {
-			gpios = <&pca9532 13 0>;
-			default-state = "off";
-		};
-		lede7 {
-			gpios = <&pca9532 14 0>;
-			default-state = "off";
-		};
-		lede8 {
-			gpios = <&pca9532 15 0>;
-			default-state = "off";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/ecx-2000.dts b/arch/arm/boot/dts/ecx-2000.dts
index 2ccbb57fbfa8..f6eb71553b95 100644
--- a/arch/arm/boot/dts/ecx-2000.dts
+++ b/arch/arm/boot/dts/ecx-2000.dts
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /dts-v1/;
@@ -24,7 +13,6 @@
 	compatible = "calxeda,ecx-2000";
 	#address-cells = <2>;
 	#size-cells = <2>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -94,19 +82,18 @@
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
+			#address-cells = <0>;
 			interrupt-controller;
 			interrupts = <1 9 0xf04>;
 			reg = <0xfff11000 0x1000>,
-			      <0xfff12000 0x1000>,
+			      <0xfff12000 0x2000>,
 			      <0xfff14000 0x2000>,
 			      <0xfff16000 0x2000>;
 		};
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index b90045a8f8e3..ce5221c6b358 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 / {
@@ -20,11 +9,11 @@
 	};
 
 	psci {
-		compatible	= "arm,psci";
-		method		= "smc";
-		cpu_suspend	= <0x84000002>;
-		cpu_off		= <0x84000004>;
-		cpu_on		= <0x84000006>;
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_suspend = <0x84000002>;
+		cpu_off = <0x84000004>;
+		cpu_on = <0x84000006>;
 	};
 
 	soc {
@@ -38,10 +27,11 @@
 			reg = <0xffe08000 0x10000>;
 			interrupts = <0 83 4>;
 			dma-coherent;
-			calxeda,port-phys = <&combophy5 0 &combophy0 0
-					     &combophy0 1 &combophy0 2
-					     &combophy0 3>;
-			calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+			calxeda,port-phys = < &combophy5 0>, <&combophy0 0>,
+					     <&combophy0 1>, <&combophy0 2>,
+					     <&combophy0 3>;
+			calxeda,sgpio-gpio =<&gpioh 5 1>, <&gpioh 6 1>,
+					    <&gpioh 7 1>;
 			calxeda,led-order = <4 0 1 2 3>;
 		};
 
@@ -125,8 +115,8 @@
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xfff36000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&pclk>;
-			clock-names = "apb_pclk";
+			clocks = <&pclk>, <&pclk>;
+			clock-names = "uartclk", "apb_pclk";
 		};
 
 		smic@fff3a000 {
@@ -213,14 +203,14 @@
 		ethernet@fff50000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff50000 0x1000>;
-			interrupts = <0 77 4  0 78 4  0 79 4>;
+			interrupts = <0 77 4>, <0 78 4>, <0 79 4>;
 			dma-coherent;
 		};
 
 		ethernet@fff51000 {
 			compatible = "calxeda,hb-xgmac";
 			reg = <0xfff51000 0x1000>;
-			interrupts = <0 80 4  0 81 4  0 82 4>;
+			interrupts = <0 80 4>, <0 81 4>, <0 82 4>;
 			dma-coherent;
 		};
 
diff --git a/arch/arm/boot/dts/efm32gg-dk3750.dts b/arch/arm/boot/dts/efm32gg-dk3750.dts
deleted file mode 100644
index b4031fa4a567..000000000000
--- a/arch/arm/boot/dts/efm32gg-dk3750.dts
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * Device tree for EFM32GG-DK3750 development board.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/efm32gg-dk3750-ug.pdf
- */
-
-/dts-v1/;
-#include "efm32gg.dtsi"
-
-/ {
-	model = "Energy Micro Giant Gecko Development Kit";
-	compatible = "efm32,dk3750";
-
-	chosen {
-		bootargs = "console=ttyefm4,115200 init=/linuxrc ignore_loglevel ihash_entries=64 dhash_entries=64 earlyprintk uclinux.physaddr=0x8c400000 root=/dev/mtdblock0";
-	};
-
-	memory {
-		reg = <0x88000000 0x400000>;
-	};
-
-	soc {
-		adc@40002000 {
-			status = "ok";
-		};
-
-		i2c@4000a000 {
-			efm32,location = <3>;
-			status = "ok";
-
-			temp@48 {
-				compatible = "st,stds75";
-				reg = <0x48>;
-			};
-
-			eeprom@50 {
-				compatible = "microchip,24c02";
-				reg = <0x50>;
-				pagesize = <16>;
-			};
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			cs-gpios = <&gpio 68 1>; // E4
-			location = <1>;
-			status = "ok";
-
-			microsd@0 {
-				compatible = "mmc-spi-slot";
-				spi-max-frequency = <100000>;
-				voltage-ranges = <3200 3400>;
-				broken-cd;
-				reg = <0>;
-			};
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			cs-gpios = <&gpio 51 1>; // D3
-			location = <1>;
-			status = "ok";
-
-			ks8851@0 {
-				compatible = "ks8851";
-				spi-max-frequency = <6000000>;
-				reg = <0>;
-				interrupt-parent = <&boardfpga>;
-				interrupts = <4>;
-			};
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			location = <2>;
-			status = "ok";
-		};
-
-		boardfpga: boardfpga {
-			compatible = "efm32board";
-			reg = <0x80000000 0x400>;
-			irq-gpios = <&gpio 64 1>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			status = "ok";
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/efm32gg.dtsi b/arch/arm/boot/dts/efm32gg.dtsi
deleted file mode 100644
index 106d505c5d3d..000000000000
--- a/arch/arm/boot/dts/efm32gg.dtsi
+++ /dev/null
@@ -1,172 +0,0 @@
-/*
- * Device tree for Energy Micro EFM32 Giant Gecko SoC.
- *
- * Documentation available from
- * http://www.silabs.com/Support%20Documents/TechnicalDocs/EFM32GG-RM.pdf
- */
-#include "armv7-m.dtsi"
-#include "dt-bindings/clock/efm32-cmu.h"
-
-/ {
-	aliases {
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
-		serial3 = &uart3;
-		serial4 = &uart4;
-		spi0 = &spi0;
-		spi1 = &spi1;
-		spi2 = &spi2;
-	};
-
-	soc {
-		adc: adc@40002000 {
-			compatible = "efm32,adc";
-			reg = <0x40002000 0x400>;
-			interrupts = <7>;
-			clocks = <&cmu clk_HFPERCLKADC0>;
-			status = "disabled";
-		};
-
-		gpio: gpio@40006000 {
-			compatible = "efm32,gpio";
-			reg = <0x40006000 0x1000>;
-			interrupts = <1 11>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-			clocks = <&cmu clk_HFPERCLKGPIO>;
-			status = "ok";
-		};
-
-		i2c0: i2c@4000a000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,i2c";
-			reg = <0x4000a000 0x400>;
-			interrupts = <9>;
-			clocks = <&cmu clk_HFPERCLKI2C0>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		i2c1: i2c@4000a400 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,i2c";
-			reg = <0x4000a400 0x400>;
-			interrupts = <10>;
-			clocks = <&cmu clk_HFPERCLKI2C1>;
-			clock-frequency = <100000>;
-			status = "disabled";
-		};
-
-		spi0: spi@4000c000 { /* USART0 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		spi1: spi@4000c400 { /* USART1 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		spi2: spi@4000c800 { /* USART2 */
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "efm32,spi";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart0: uart@4000c000 { /* USART0 */
-			compatible = "efm32,uart";
-			reg = <0x4000c000 0x400>;
-			interrupts = <3 4>;
-			clocks = <&cmu clk_HFPERCLKUSART0>;
-			status = "disabled";
-		};
-
-		uart1: uart@4000c400 { /* USART1 */
-			compatible = "efm32,uart";
-			reg = <0x4000c400 0x400>;
-			interrupts = <15 16>;
-			clocks = <&cmu clk_HFPERCLKUSART1>;
-			status = "disabled";
-		};
-
-		uart2: uart@4000c800 { /* USART2 */
-			compatible = "efm32,uart";
-			reg = <0x4000c800 0x400>;
-			interrupts = <18 19>;
-			clocks = <&cmu clk_HFPERCLKUSART2>;
-			status = "disabled";
-		};
-
-		uart3: uart@4000e000 { /* UART0 */
-			compatible = "efm32,uart";
-			reg = <0x4000e000 0x400>;
-			interrupts = <20 21>;
-			clocks = <&cmu clk_HFPERCLKUART0>;
-			status = "disabled";
-		};
-
-		uart4: uart@4000e400 { /* UART1 */
-			compatible = "efm32,uart";
-			reg = <0x4000e400 0x400>;
-			interrupts = <22 23>;
-			clocks = <&cmu clk_HFPERCLKUART1>;
-			status = "disabled";
-		};
-
-		timer0: timer@40010000 {
-			compatible = "efm32,timer";
-			reg = <0x40010000 0x400>;
-			interrupts = <2>;
-			clocks = <&cmu clk_HFPERCLKTIMER0>;
-		};
-
-		timer1: timer@40010400 {
-			compatible = "efm32,timer";
-			reg = <0x40010400 0x400>;
-			interrupts = <12>;
-			clocks = <&cmu clk_HFPERCLKTIMER1>;
-		};
-
-		timer2: timer@40010800 {
-			compatible = "efm32,timer";
-			reg = <0x40010800 0x400>;
-			interrupts = <13>;
-			clocks = <&cmu clk_HFPERCLKTIMER2>;
-		};
-
-		timer3: timer@40010c00 {
-			compatible = "efm32,timer";
-			reg = <0x40010c00 0x400>;
-			interrupts = <14>;
-			clocks = <&cmu clk_HFPERCLKTIMER3>;
-		};
-
-		cmu: cmu@400c8000 {
-			compatible = "efm32gg,cmu";
-			reg = <0x400c8000 0x400>;
-			interrupts = <32>;
-			#clock-cells = <1>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
index f97f70f83374..9698801cbcfb 100644
--- a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -1,10 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Common devices used in different OMAP boards
  */
 
 / {
 	elpida_ECB240ABACN: lpddr2 {
-		compatible	= "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+		compatible	= "elpida,ECB240ABACN","jedec,lpddr2-s4";
 		density		= <2048>;
 		io-width	= <32>;
 
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index 1dee0aa4f40c..89495dd37358 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device Tree Source for the KZM9D board
  *
  * Copyright (C) 2013 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 /dts-v1/;
 
@@ -18,52 +15,53 @@
 	model = "EMEV2 KZM9D Board";
 	compatible = "renesas,kzm9d", "renesas,emev2";
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x8000000>;
 	};
 
+	aliases {
+		serial1 = &uart1;
+	};
+
 	chosen {
-		bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
-		stdout-path = &uart1;
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+		stdout-path = "serial1:115200n8";
 	};
 
 	gpio_keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		button@1 {
-			debounce_interval = <50>;
-			wakeup = <1>;
+		one {
+			debounce-interval = <50>;
+			wakeup-source;
 			label = "DSW2-1";
 			linux,code = <KEY_1>;
 			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
 		};
-		button@2 {
-			debounce_interval = <50>;
-			wakeup = <1>;
+		two {
+			debounce-interval = <50>;
+			wakeup-source;
 			label = "DSW2-2";
 			linux,code = <KEY_2>;
 			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 		};
-		button@3 {
-			debounce_interval = <50>;
-			wakeup = <1>;
+		three {
+			debounce-interval = <50>;
+			wakeup-source;
 			label = "DSW2-3";
 			linux,code = <KEY_3>;
 			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
 		};
-		button@4 {
-			debounce_interval = <50>;
-			wakeup = <1>;
+		four {
+			debounce-interval = <50>;
+			wakeup-source;
 			label = "DSW2-4";
 			linux,code = <KEY_4>;
 			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
-	reg_1p8v: regulator@0 {
+	reg_1p8v: regulator-1p8v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-1.8V";
 		regulator-min-microvolt = <1800000>;
@@ -72,7 +70,7 @@
 		regulator-boot-on;
 	};
 
-	reg_3p3v: regulator@1 {
+	reg_3p3v: regulator-3p3v {
 		compatible = "regulator-fixed";
 		regulator-name = "fixed-3.3V";
 		regulator-min-microvolt = <3300000>;
@@ -82,7 +80,7 @@
 	};
 
 	ethernet@20000000 {
-		compatible = "smsc,lan9220", "smsc,lan9115";
+		compatible = "smsc,lan9221", "smsc,lan9115";
 		reg = <0x20000000 0x10000>;
 		phy-mode = "mii";
 		interrupt-parent = <&gpio0>;
@@ -95,10 +93,18 @@
 	};
 };
 
+&iic0 {
+	status = "okay";
+};
+
+&iic1 {
+	status = "okay";
+};
+
 &pfc {
-	uart1_pins: serial@e1030000 {
-		renesas,groups = "uart1_ctrl", "uart1_data";
-		renesas,function = "uart1";
+	uart1_pins: uart1 {
+		groups = "uart1_ctrl", "uart1_data";
+		function = "uart1";
 	};
 };
 
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index bb45694d91bc..ecfaa0b7523e 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -1,19 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Device Tree Source for the EMEV2 SoC
+ * Device Tree Source for the Emma Mobile EV2 SoC
  *
  * Copyright (C) 2012 Renesas Solutions Corp.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
-#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "renesas,emev2";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		gpio0 = &gpio0;
@@ -21,19 +20,21 @@
 		gpio2 = &gpio2;
 		gpio3 = &gpio3;
 		gpio4 = &gpio4;
+		i2c0 = &iic0;
+		i2c1 = &iic1;
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0>;
 			clock-frequency = <533000000>;
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <1>;
@@ -42,7 +43,7 @@
 	};
 
 	gic: interrupt-controller@e0020000 {
-		compatible = "arm,cortex-a9-gic";
+		compatible = "arm,pl390";
 		interrupt-controller;
 		#interrupt-cells = <3>;
 		reg = <0xe0028000 0x1000>,
@@ -51,8 +52,9 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
 	clocks@e0110000 {
@@ -66,6 +68,30 @@
 			clock-frequency = <32768>;
 			#clock-cells = <0>;
 		};
+		iic0_sclkdiv: iic0_sclkdiv@624,0 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 0>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic0_sclk: iic0_sclk@48c,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x48c 1>;
+			clocks = <&iic0_sclkdiv>;
+			#clock-cells = <0>;
+		};
+		iic1_sclkdiv: iic1_sclkdiv@624,16 {
+			compatible = "renesas,emev2-smu-clkdiv";
+			reg = <0x624 16>;
+			clocks = <&pll3_fo>;
+			#clock-cells = <0>;
+		};
+		iic1_sclk: iic1_sclk@490,1 {
+			compatible = "renesas,emev2-smu-gclk";
+			reg = <0x490 1>;
+			clocks = <&iic1_sclkdiv>;
+			#clock-cells = <0>;
+		};
 		pll3_fo: pll3_fo {
 			compatible = "fixed-factor-clock";
 			clocks = <&c32ki>;
@@ -73,55 +99,55 @@
 			clock-mult = <7000>;
 			#clock-cells = <0>;
 		};
-		usia_u0_sclkdiv: usia_u0_sclkdiv {
+		usia_u0_sclkdiv: usia_u0_sclkdiv@610,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x610 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u1_sclkdiv: usib_u1_sclkdiv {
+		usib_u1_sclkdiv: usib_u1_sclkdiv@65c,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x65c 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u2_sclkdiv: usib_u2_sclkdiv {
+		usib_u2_sclkdiv: usib_u2_sclkdiv@65c,16 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x65c 16>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usib_u3_sclkdiv: usib_u3_sclkdiv {
+		usib_u3_sclkdiv: usib_u3_sclkdiv@660,0 {
 			compatible = "renesas,emev2-smu-clkdiv";
 			reg = <0x660 0>;
 			clocks = <&pll3_fo>;
 			#clock-cells = <0>;
 		};
-		usia_u0_sclk: usia_u0_sclk {
+		usia_u0_sclk: usia_u0_sclk@4a0,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4a0 1>;
 			clocks = <&usia_u0_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u1_sclk: usib_u1_sclk {
+		usib_u1_sclk: usib_u1_sclk@4b8,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4b8 1>;
 			clocks = <&usib_u1_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u2_sclk: usib_u2_sclk {
+		usib_u2_sclk: usib_u2_sclk@4bc,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4bc 1>;
 			clocks = <&usib_u2_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		usib_u3_sclk: usib_u3_sclk {
+		usib_u3_sclk: usib_u3_sclk@4c0,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x4c0 1>;
 			clocks = <&usib_u3_sclkdiv>;
 			#clock-cells = <0>;
 		};
-		sti_sclk: sti_sclk {
+		sti_sclk: sti_sclk@528,1 {
 			compatible = "renesas,emev2-smu-gclk";
 			reg = <0x528 1>;
 			clocks = <&c32ki>;
@@ -132,7 +158,7 @@
 	timer@e0180000 {
 		compatible = "renesas,em-sti";
 		reg = <0xe0180000 0x54>;
-		interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&sti_sclk>;
 		clock-names = "sclk";
 	};
@@ -140,7 +166,7 @@
 	uart0: serial@e1020000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1020000 0x38>;
-		interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usia_u0_sclk>;
 		clock-names = "sclk";
 	};
@@ -148,7 +174,7 @@
 	uart1: serial@e1030000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1030000 0x38>;
-		interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u1_sclk>;
 		clock-names = "sclk";
 	};
@@ -156,7 +182,7 @@
 	uart2: serial@e1040000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1040000 0x38>;
-		interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u2_sclk>;
 		clock-names = "sclk";
 	};
@@ -164,12 +190,12 @@
 	uart3: serial@e1050000 {
 		compatible = "renesas,em-uart";
 		reg = <0xe1050000 0x38>;
-		interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&usib_u3_sclk>;
 		clock-names = "sclk";
 	};
 
-	pfc: pfc@e0140200 {
+	pfc: pinctrl@e0140200 {
 		compatible = "renesas,pfc-emev2";
 		reg = <0xe0140200 0x100>;
 	};
@@ -177,8 +203,8 @@
 	gpio0: gpio@e0050000 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
-		interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 68 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 0 32>;
 		#gpio-cells = <2>;
@@ -186,11 +212,12 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
 	gpio1: gpio@e0050080 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
-		interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 70 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 32 32>;
 		#gpio-cells = <2>;
@@ -198,11 +225,12 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
 	gpio2: gpio@e0050100 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
-		interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 72 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 64 32>;
 		#gpio-cells = <2>;
@@ -210,11 +238,12 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
 	gpio3: gpio@e0050180 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
-		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 74 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 96 32>;
 		#gpio-cells = <2>;
@@ -222,11 +251,12 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
 	gpio4: gpio@e0050200 {
 		compatible = "renesas,em-gio";
 		reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
-		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		gpio-controller;
 		gpio-ranges = <&pfc 0 128 31>;
 		#gpio-cells = <2>;
@@ -234,4 +264,26 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 	};
+
+	iic0: i2c@e0070000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe0070000 0x28>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic0_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
+
+	iic1: i2c@e10a0000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "renesas,iic-emev2";
+		reg = <0xe10a0000 0x28>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&iic1_sclk>;
+		clock-names = "sclk";
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/en7523-evb.dts b/arch/arm/boot/dts/en7523-evb.dts
new file mode 100644
index 000000000000..f23a25cce119
--- /dev/null
+++ b/arch/arm/boot/dts/en7523-evb.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/dts-v1/;
+
+/* Bootloader installs ATF here */
+/memreserve/ 0x80000000 0x200000;
+
+#include "en7523.dtsi"
+
+/ {
+	model = "Airoha EN7523 Evaluation Board";
+	compatible = "airoha,en7523-evb", "airoha,en7523";
+
+	aliases {
+		serial0 = &uart1;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200 earlycon";
+		stdout-path = "serial0:115200n8";
+		linux,usable-memory-range = <0x80200000 0x1fe00000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&pcie1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/en7523.dtsi b/arch/arm/boot/dts/en7523.dtsi
new file mode 100644
index 000000000000..7f839331a777
--- /dev/null
+++ b/arch/arm/boot/dts/en7523.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/en7523-clk.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		npu_binary@84000000 {
+			no-map;
+			reg = <0x84000000 0xA00000>;
+		};
+
+		npu_flag@84B0000 {
+			no-map;
+			reg = <0x84B00000 0x100000>;
+		};
+
+		npu_pkt@85000000 {
+			no-map;
+			reg = <0x85000000 0x1A00000>;
+		};
+
+		npu_phyaddr@86B00000 {
+			no-map;
+			reg = <0x86B00000 0x100000>;
+		};
+
+		npu_rxdesc@86D00000 {
+			no-map;
+			reg = <0x86D00000 0x100000>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			clock-frequency = <80000000>;
+			next-level-cache = <&L2_0>;
+		};
+
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	scu: system-controller@1fa20000 {
+		compatible = "airoha,en7523-scu";
+		reg = <0x1fa20000 0x400>,
+		      <0x1fb00000 0x1000>;
+		#clock-cells = <1>;
+	};
+
+	gic: interrupt-controller@9000000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x09000000 0x20000>,
+		      <0x09080000 0x80000>,
+		      <0x09400000 0x2000>,
+		      <0x09500000 0x2000>,
+		      <0x09600000 0x20000>;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	uart1: serial@1fbf0000 {
+		compatible = "ns16550";
+		reg = <0x1fbf0000 0x30>;
+		reg-io-width = <4>;
+		reg-shift = <2>;
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <1843200>;
+		status = "okay";
+	};
+
+	gpio0: gpio@1fbf0200 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0204 0x4>,
+		      <0x1fbf0200 0x4>,
+		      <0x1fbf0220 0x4>,
+		      <0x1fbf0214 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpio1: gpio@1fbf0270 {
+		compatible = "airoha,en7523-gpio";
+		reg = <0x1fbf0270 0x4>,
+		      <0x1fbf0260 0x4>,
+		      <0x1fbf0264 0x4>,
+		      <0x1fbf0278 0x4>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	pcie0: pcie@1fa91000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa91000 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000  0x20000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+
+	pcie1: pcie@1fa92000 {
+		compatible = "airoha,en7523-pcie", "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0x1fa92000 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&scu EN7523_CLK_PCIE>;
+		clock-names = "sys_ck1";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ep7209.dtsi b/arch/arm/boot/dts/ep7209.dtsi
new file mode 100644
index 000000000000..57bdad2c1994
--- /dev/null
+++ b/arch/arm/boot/dts/ep7209.dtsi
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+/dts-v1/;
+
+#include <dt-bindings/clock/clps711x-clock.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	model = "Cirrus Logic EP7209";
+	compatible = "cirrus,ep7209";
+
+	chosen { };
+
+	aliases {
+		gpio0 = &porta;
+		gpio1 = &portb;
+		gpio3 = &portd;
+		gpio4 = &porte;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		spi0 = &spi;
+		timer0 = &timer1;
+		timer1 = &timer2;
+	};
+
+	cpus {
+		#address-cells = <0>;
+		#size-cells = <0>;
+
+		cpu {
+			device_type = "cpu";
+			compatible = "arm,arm720t";
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		clks: clks@80000000 {
+			#clock-cells = <1>;
+			compatible = "cirrus,ep7209-clk";
+			reg = <0x80000000 0xc000>;
+			startup-frequency = <73728000>;
+		};
+
+		intc: intc@80000000 {
+			compatible = "cirrus,ep7209-intc";
+			reg = <0x80000000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		porta: gpio@80000000 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000000 0x1 0x80000040 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portb: gpio@80000001 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000001 0x1 0x80000041 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		portd: gpio@80000003 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000003 0x1 0x80000043 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		porte: gpio@80000083 {
+			compatible = "cirrus,ep7209-gpio";
+			reg = <0x80000083 0x1 0x800000c3 0x1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		syscon1: syscon@80000100 {
+			compatible = "cirrus,ep7209-syscon1", "syscon";
+			reg = <0x80000100 0x80>;
+		};
+
+		bus: bus@80000180 {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			compatible = "cirrus,ep7209-bus", "simple-bus";
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			reg = <0x80000180 0x80>;
+			ranges = <
+				0 0 0x00000000 0x10000000
+				1 0 0x10000000 0x10000000
+				2 0 0x20000000 0x10000000
+				3 0 0x30000000 0x10000000
+				4 0 0x40000000 0x10000000
+				5 0 0x50000000 0x10000000
+				6 0 0x60000000 0x0000c000
+				7 0 0x70000000 0x00000080
+			>;
+		};
+
+		fb: fb@800002c0 {
+			compatible = "cirrus,ep7209-fb";
+			reg = <0x800002c0 0xd44>, <0x60000000 0xc000>;
+			clocks = <&clks CLPS711X_CLK_BUS>;
+			syscon = <&syscon1>;
+			status = "disabled";
+		};
+
+		timer1: timer@80000300 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000300 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER1>;
+			interrupts = <8>;
+		};
+
+		timer2: timer@80000340 {
+			compatible = "cirrus,ep7209-timer";
+			reg = <0x80000340 0x4>;
+			clocks = <&clks CLPS711X_CLK_TIMER2>;
+			interrupts = <9>;
+		};
+
+		pwm: pwm@80000400 {
+			compatible = "cirrus,ep7209-pwm";
+			reg = <0x80000400 0x4>;
+			clocks = <&clks CLPS711X_CLK_PWM>;
+			#pwm-cells = <1>;
+		};
+
+		uart1: serial@80000480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80000480 0x80>;
+			interrupts = <12 13>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon1>;
+		};
+
+		spi: spi@80000500 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "cirrus,ep7209-spi";
+			reg = <0x80000500 0x4>;
+			interrupts = <15>;
+			clocks = <&clks CLPS711X_CLK_SPI>;
+			syscon = <&syscon3>;
+			status = "disabled";
+		};
+
+		syscon2: syscon@80001100 {
+			compatible = "cirrus,ep7209-syscon2", "syscon";
+			reg = <0x80001100 0x80>;
+		};
+
+		uart2: serial@80001480 {
+			compatible = "cirrus,ep7209-uart";
+			reg = <0x80001480 0x80>;
+			interrupts = <28 29>;
+			clocks = <&clks CLPS711X_CLK_UART>;
+			syscon = <&syscon2>;
+		};
+
+		dai: dai@80002000 {
+			#sound-dai-cells = <0>;
+			compatible = "cirrus,ep7209-dai";
+			reg = <0x80002000 0x604>;
+			clocks = <&clks CLPS711X_CLK_PLL>;
+			clock-names = "pll";
+			interrupts = <32>;
+			syscon = <&syscon3>;
+			status = "disabled";
+		};
+
+		syscon3: syscon@80002200 {
+			compatible = "cirrus,ep7209-syscon3", "syscon";
+			reg = <0x80002200 0x40>;
+		};
+	};
+
+	keypad: keypad {
+		compatible = "cirrus,ep7209-keypad";
+		interrupt-parent = <&intc>;
+		interrupts = <16>;
+		syscon = <&syscon1>;
+		status = "disabled";
+	};
+
+	mctrl: mctrl {
+		compatible = "cirrus,ep7209-mctrl-gpio";
+		gpio,syscon-dev = <&syscon1 0 0>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
diff --git a/arch/arm/boot/dts/ep7211-edb7211.dts b/arch/arm/boot/dts/ep7211-edb7211.dts
new file mode 100644
index 000000000000..7fb532f227af
--- /dev/null
+++ b/arch/arm/boot/dts/ep7211-edb7211.dts
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ep7211.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Cirrus Logic EP7211 Development Board";
+	compatible = "cirrus,edb7211", "cirrus,ep7211", "cirrus,ep7209";
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x02000000>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0>;
+		brightness-levels = <
+			0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+			0x8 0x9 0xa 0xb 0xc 0xd 0xe 0xf
+		>;
+		default-brightness-level = <0x0>;
+		power-supply = <&blen>;
+	};
+
+	display: display {
+		model = "320x240x4";
+		bits-per-pixel = <4>;
+		ac-prescale = <17>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: 320x240 {
+				hactive = <320>;
+				hback-porch = <0>;
+				hfront-porch = <0>;
+				hsync-len = <0>;
+				vactive = <240>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <0>;
+				clock-frequency = <6500000>;
+			};
+		};
+	};
+
+	i2c: i2c {
+		compatible = "i2c-gpio";
+		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
+			<&portd 5 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <2>;
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	lcddc: lcddc {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	blen: blen {
+		compatible = "regulator-fixed";
+		regulator-name = "BACKLIGHT ENABLE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&portd 3 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&bus {
+	flash: nor@0 {
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x02000000>;
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&fb {
+	display = <&display>;
+	lcd-supply = <&lcddc>;
+	status = "okay";
+};
+
+&portd {
+	lcden {
+		gpio-hog;
+		gpios = <2 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "LCD ENABLE";
+	};
+};
diff --git a/arch/arm/boot/dts/ep7211.dtsi b/arch/arm/boot/dts/ep7211.dtsi
new file mode 100644
index 000000000000..32a4e1237145
--- /dev/null
+++ b/arch/arm/boot/dts/ep7211.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "ep7209.dtsi"
+
+/ {
+	model = "Cirrus Logic EP7211";
+	compatible = "cirrus,ep7211", "cirrus,ep7209";
+};
diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts
index 243044343ee8..ad7a0850252a 100644
--- a/arch/arm/boot/dts/ethernut5.dts
+++ b/arch/arm/boot/dts/ethernut5.dts
@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * ethernut5.dts - Device Tree file for Ethernut 5 board
  *
  * Copyright (C) 2012 egnite GmbH <info@egnite.de>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9xe.dtsi"
@@ -16,7 +15,7 @@
 		bootargs = "console=ttyS0,115200 root=/dev/mtdblock0 rw rootfstype=jffs2";
 	};
 
-	memory {
+	memory@20000000 {
 		reg = <0x20000000 0x08000000>;
 	};
 
@@ -36,6 +35,18 @@
 				status = "okay";
 			};
 
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			usart0: serial@fffb0000 {
 				status = "okay";
 			};
@@ -55,35 +66,48 @@
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
 
-			gpios = <0
-				 &pioC 14 GPIO_ACTIVE_HIGH
-				 0
-				>;
-
-			root@0 {
-				label = "root";
-				reg = <0x0 0x08000000>;
-			};
-
-			data@20000 {
-				label = "data";
-				reg = <0x08000000 0x38000000>;
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs>;
+				pinctrl-names = "default";
+
+				nand: nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						root@0 {
+							label = "root";
+							reg = <0x0 0x08000000>;
+						};
+
+						data@20000 {
+							label = "data";
+							reg = <0x08000000 0x38000000>;
+						};
+					};
+				};
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 
 		pcf8563@50 {
diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts
index f72969efe6d7..6d519d02d190 100644
--- a/arch/arm/boot/dts/evk-pro3.dts
+++ b/arch/arm/boot/dts/evk-pro3.dts
@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3
  *
  * Copyright (C) 2012 Telit,
  *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 /dts-v1/;
@@ -46,13 +45,13 @@
 			};
 		};
 
-		usb0: ohci@00500000 {
+		usb0: ohci@500000 {
 			num-ports = <2>;
 			status = "okay";
 		};
 	};
 
-	i2c@0 {
+	i2c-gpio-0 {
 		status = "okay";
 	};
 
diff --git a/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
new file mode 100644
index 000000000000..597ade3e252f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-mfc-reserved-memory.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos SoC MFC (Video Codec) reserved memory common definition.
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd
+ */
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mfc_left: region-mfc-left {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x2400000>;
+			alignment = <0x100000>;
+		};
+
+		mfc_right: region-mfc-right {
+			compatible = "shared-dma-pool";
+			no-map;
+			size = <0x800000>;
+			alignment = <0x100000>;
+		};
+	};
+};
+
+&mfc {
+	memory-region = <&mfc_left>, <&mfc_right>;
+};
diff --git a/arch/arm/boot/dts/exynos-pinctrl.h b/arch/arm/boot/dts/exynos-pinctrl.h
new file mode 100644
index 000000000000..e3a6df95281c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-pinctrl.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung Exynos DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@kernel.org>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__
+
+#define EXYNOS_PIN_PULL_NONE		0
+#define EXYNOS_PIN_PULL_DOWN		1
+#define EXYNOS_PIN_PULL_UP		3
+
+/* Pin function in power down mode */
+#define EXYNOS_PIN_PDN_OUT0		0
+#define EXYNOS_PIN_PDN_OUT1		1
+#define EXYNOS_PIN_PDN_INPUT		2
+#define EXYNOS_PIN_PDN_PREV		3
+
+/* Drive strengths for Exynos3250, Exynos4 (all) and Exynos5250 */
+#define EXYNOS4_PIN_DRV_LV1		0
+#define EXYNOS4_PIN_DRV_LV2		2
+#define EXYNOS4_PIN_DRV_LV3		1
+#define EXYNOS4_PIN_DRV_LV4		3
+
+/* Drive strengths for Exynos5260 */
+#define EXYNOS5260_PIN_DRV_LV1		0
+#define EXYNOS5260_PIN_DRV_LV2		1
+#define EXYNOS5260_PIN_DRV_LV4		2
+#define EXYNOS5260_PIN_DRV_LV6		3
+
+/*
+ * Drive strengths for Exynos5410, Exynos542x, Exynos5800 and Exynos850 (except
+ * GPIO_HSI block)
+ */
+#define EXYNOS5420_PIN_DRV_LV1		0
+#define EXYNOS5420_PIN_DRV_LV2		1
+#define EXYNOS5420_PIN_DRV_LV3		2
+#define EXYNOS5420_PIN_DRV_LV4		3
+
+#define EXYNOS_PIN_FUNC_INPUT		0
+#define EXYNOS_PIN_FUNC_OUTPUT		1
+#define EXYNOS_PIN_FUNC_2		2
+#define EXYNOS_PIN_FUNC_3		3
+#define EXYNOS_PIN_FUNC_4		4
+#define EXYNOS_PIN_FUNC_5		5
+#define EXYNOS_PIN_FUNC_6		6
+#define EXYNOS_PIN_FUNC_EINT		0xf
+#define EXYNOS_PIN_FUNC_F		EXYNOS_PIN_FUNC_EINT
+
+#endif /* __DTS_ARM_SAMSUNG_EXYNOS_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/exynos-syscon-restart.dtsi b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
new file mode 100644
index 000000000000..bc9a78f6d4b7
--- /dev/null
+++ b/arch/arm/boot/dts/exynos-syscon-restart.dtsi
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos SoC syscon reboot/poweroff nodes common definition.
+ */
+
+&pmu_system_controller {
+	poweroff: syscon-poweroff {
+		compatible = "syscon-poweroff";
+		regmap = <&pmu_system_controller>;
+		offset = <0x330c>; /* PS_HOLD_CONTROL */
+		mask = <0x5200>; /* reset value */
+	};
+
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&pmu_system_controller>;
+		offset = <0x0400>; /* SWRESET */
+		mask = <0x1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5-eval.dts b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
new file mode 100644
index 000000000000..660cc7fac4db
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5-eval.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 evaluation board
+ * which is based on Samsung Exynos3250 SoC.
+ */
+
+/dts-v1/;
+#include "exynos3250-artik5.dtsi"
+
+/ {
+	model = "Samsung ARTIK5 evaluation board";
+	compatible = "samsung,artik5-eval", "samsung,artik5",
+			"samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		mmc0 = &mshc_2;
+	};
+};
+
+&mshc_2 {
+	cap-sd-highspeed;
+	disable-wp;
+	vqmmc-supply = <&ldo3_reg>;
+	card-detect-delay = <200>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&spi_0 {
+	status = "okay";
+	cs-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>, <0>;
+
+	assigned-clocks = <&cmu CLK_MOUT_SPI0>, <&cmu CLK_DIV_SPI0>,
+			  <&cmu CLK_DIV_SPI0_PRE>, <&cmu CLK_SCLK_SPI0>;
+	assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>, /* for: CLK_MOUT_SPI0 */
+				 <&cmu CLK_MOUT_SPI0>,    /* for: CLK_DIV_SPI0 */
+				 <&cmu CLK_DIV_SPI0>,     /* for: CLK_DIV_SPI0_PRE */
+				 <&cmu CLK_DIV_SPI0_PRE>; /* for: CLK_SCLK_SPI0 */
+
+	ethernet@0 {
+		compatible = "asix,ax88796c";
+		reg = <0x0>;
+		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a boot-loader */
+		interrupt-parent = <&gpx2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <40000000>;
+		reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
+
+		controller-data {
+			samsung,spi-feedback-delay = <2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
new file mode 100644
index 000000000000..3fdd922e635c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos3250 based ARTIK5 module device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's ARTIK5 module which is based on
+ * Samsung Exynos3250 SoC.
+ */
+
+#include "exynos3250.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
+
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x1f800000>;
+	};
+
+	firmware@205f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0205f000 0x1000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>,
+							 <&cpu1 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>,
+							 <&cpu1 8 8>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo7_reg>;
+	assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+	assigned-clock-rates = <6000000>;
+};
+
+&cmu {
+	clocks = <&xusbxti>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&i2c_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps14-pmic";
+		interrupt-parent = <&gpx3>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps14_irq>;
+		reg = <0x66>;
+
+		s2mps14_osc: clocks {
+			compatible = "samsung,s2mps14-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps14_ap", "unused",
+				"s2mps14_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				/* VDD_ALIVE15x */
+				regulator-name = "VLDO1_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				/* VDDQM176 ~ VDDQM185 */
+				regulator-name = "VLDO2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				/*
+				 * VDD1_E106 ~ VDD1_E111
+				 * DVDD_RTC_AP, DVDD_MMC2_AP
+				 */
+				regulator-name = "VLDO3_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				/*  AVDD_PLL1120 ~ AVDD_PLL11201 */
+				regulator-name = "VLDO4_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
+				regulator-name = "VLDO5_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				/* VDD_USB, VDD10_HSIC */
+				regulator-name = "VLDO6_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				/*
+				 * VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
+				 * AVDD_ADC, AVDD_ABB_0, M4S_VDD18
+				 */
+				regulator-name = "VLDO7_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				/* AVDD33_UOTG */
+				regulator-name = "VLDO8_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				/* VDDQ_E86 ~ VDDQ_E105*/
+				regulator-name = "VLDO9_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VLDO10_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+			};
+
+			ldo11_reg: LDO11 {
+				/* VDD74 ~ VDD75 */
+				regulator-name = "VLDO11_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo12_reg: LDO12 {
+				/* VDD72 ~ VDD73 */
+				regulator-name = "VLDO12_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VLDO13_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VLDO14_2.7V";
+				regulator-min-microvolt = <2700000>;
+				regulator-max-microvolt = <2700000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VLDO_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VLDO16_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VLDO17_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo18_reg: LDO18 {
+				/* DVDD_MMC2_AP */
+				regulator-name = "VLDO18_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VLDO19_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VLDO20_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VLDO21_1.25V";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <1250000>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VLDO22_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo23_reg: LDO23 {
+				/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
+				regulator-name = "VLDO23_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VLDO24_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VLDO25_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				/* VDD_MIF */
+				regulator-name = "VBUCK1_1.0V";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				/* VDD_CPU */
+				regulator-name = "VBUCK2_1.2V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: BUCK3 {
+				/* VDD_G3D */
+				regulator-name = "VBUCK3_1.0V";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VBUCK4_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VBUCK5_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&mshc_0 {
+	non-removable;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo12_reg>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&mshc_1 {
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	disable-wp;
+	non-removable;
+	keep-power-in-suspend;
+	fifo-depth = <0x40>;
+	vqmmc-supply = <&ldo11_reg>;
+	/*
+	 * Voltage negotiation is broken for the SDIO periph so we
+	 * can't actually set the voltage here.
+	 * vmmc-supply = <&ldo23_reg>;
+	 */
+	card-detect-delay = <500>;
+	clock-frequency = <100000000>;
+	max-frequency = <100000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&pinctrl_1 {
+	bten: bten-pins {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	wlanen: wlanen-pins {
+		samsung,pins = "gpx2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
+		samsung,pin-val = <1>;
+	};
+
+	s2mps14_irq: s2mps14-irq-pins {
+		samsung,pins = "gpx3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bthostwake: bthostwake-pins {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	btwake: btwake-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bten &btwake &bthostwake>;
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpx1 7 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx3 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+	};
+};
+
+&tmu {
+	status = "okay";
+};
+
+&xusbxti {
+	clock-frequency = <24000000>;
+};
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index a5863acc5fff..2de877d4ccc5 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos3250 based Monk board device tree source
  *
@@ -6,14 +7,11 @@
  *
  * Device tree source file for Samsung's Monk board which is based on
  * Samsung Exynos3250 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
 #include "exynos3250.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
@@ -24,26 +22,28 @@
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
 	};
 
-	memory {
-		reg =  <0x40000000 0x1ff00000>;
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x1ff00000>;
 	};
 
-	firmware@0205F000 {
+	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power_key {
+		power-key {
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -52,24 +52,25 @@
 		regulator-name = "V_EMMC_2.8V-fixed";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 0>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		max77836: subpmic@25 {
+		max77836: pmic@25 {
 			compatible = "maxim,max77836";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 0>;
+			interrupts = <5 IRQ_TYPE_NONE>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
@@ -116,6 +117,23 @@
 		min-microvolt = <1100000>;
 		max-microvolt = <2700000>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Correspond to 500MHz at freq_table */
+					cooling-device = <&cpu0 5 5>,
+							 <&cpu1 5 5>;
+				};
+				map1 {
+					/* Correspond to 200MHz at freq_table */
+					cooling-device = <&cpu0 8 8>,
+							 <&cpu1 8 8>;
+				};
+			};
+		};
+	};
 };
 
 &adc {
@@ -125,7 +143,7 @@
 	assigned-clock-rates = <6000000>;
 
 	thermistor-ap {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -133,7 +151,7 @@
 	};
 
 	thermistor-battery {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -141,7 +159,27 @@
 	};
 };
 
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&cmu {
+	clocks = <&xusbxti>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &exynos_usbphy {
+	vbus-supply = <&safeout_reg>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck3_reg>;
 	status = "okay";
 };
 
@@ -160,12 +198,12 @@
 	samsung,i2c-max-bus-freq = <100000>;
 	status = "okay";
 
-	s2mps14_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";
@@ -247,14 +285,14 @@
 				regulator-name = "V_EMMC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo12_reg: LDO12 {
 				regulator-name = "V_EMMC_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo13_reg: LDO13 {
@@ -386,7 +424,7 @@
 	fuelgauge@36 {
 		compatible = "maxim,max77836-battery";
 		interrupt-parent = <&gpx1>;
-		interrupts = <2 8>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x36>;
 	};
 };
@@ -398,16 +436,15 @@
 &mshc_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	num-slots = <1>;
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
-	desc-num = <4>;
 	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
 	vmmc-supply = <&vemmc_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -438,46 +475,6 @@
 	status = "okay";
 };
 
-&ppmu_dmc0 {
-	status = "okay";
-
-	events {
-		ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-		};
-	};
-};
-
-&ppmu_dmc1 {
-	status = "okay";
-
-	events {
-		ppmu_dmc1_3: ppmu-event3-dmc1 {
-			event-name = "ppmu-event3-dmc1";
-		};
-	};
-};
-
-&ppmu_leftbus {
-	status = "okay";
-
-	events {
-		ppmu_leftbus_3: ppmu-event3-leftbus {
-			event-name = "ppmu-event3-leftbus";
-		};
-	};
-};
-
-&ppmu_rightbus {
-	status = "okay";
-
-	events {
-		ppmu_rightbus_3: ppmu-event3-rightbus {
-			event-name = "ppmu-event3-rightbus";
-		};
-	};
-};
-
 &xusbxti {
 	clock-frequency = <24000000>;
 };
@@ -538,7 +535,17 @@
 
 &pinctrl_1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+	};
 
 	sleep1: sleep-state {
 		PIN_SLP(gpe0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 5ab81c39e2c9..011ba2eff29e 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos3250 SoCs pin-mux and pin-config device tree source
  *
@@ -6,30 +7,27 @@
  *
  * Samsung's Exynos3250 SoCs pin-mux and pin-config optiosn are listed as device
  * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
-
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
+ */
+
+#include "exynos-pinctrl.h"
+
+#define PIN_IN(_pin, _pull, _drv)					\
+	pin- ## _pin {							\
+		samsung,pins = #_pin;					\
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;		\
+		samsung,pin-pud = <EXYNOS_PIN_PULL_ ##_pull>;		\
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_ ##_drv>;		\
+	}
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	pin- ## _pin {							\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
 	}
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -37,7 +35,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -45,7 +43,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb: gpb {
+	gpb: gpb-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -53,7 +51,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -61,7 +59,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -69,7 +67,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -77,7 +75,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -85,173 +83,180 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c2_bus: i2c2-bus {
+	i2c2_bus: i2c2-bus-pins {
 		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c3_bus: i2c3-bus {
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2s2_bus: i2s2-bus {
+	i2s2_bus: i2s2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pcm2_bus: pcm2-bus {
+	pcm2_bus: pcm2-bus-pins {
 		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
 				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm0_out: pwm0-out {
+	pwm0_out: pwm0-out-pins {
 		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm1_out: pwm1-out {
+	pwm1_out: pwm1-out-pins {
 		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm2_out: pwm2-out {
+	pwm2_out: pwm2-out-pins {
 		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	pwm3_out: pwm3-out {
+	pwm3_out: pwm3-out-pins {
 		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c0_bus: i2c0-bus {
+	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	mipi0_clk: mipi0-clk {
+	mipi0_clk: mipi0-clk-pins {
 		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	i2c1_bus: i2c1-bus {
+	i2c1_bus: i2c1-bus-pins {
 		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpe2: gpe2 {
+	gpe2: gpe2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -259,7 +264,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk1: gpk1 {
+	gpk1: gpk1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -267,7 +272,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk2: gpk2 {
+	gpk2: gpk2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -275,7 +280,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpl0: gpl0 {
+	gpl0: gpl0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -283,7 +288,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm0: gpm0 {
+	gpm0: gpm0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -291,7 +296,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm1: gpm1 {
+	gpm1: gpm1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -299,7 +304,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm2: gpm2 {
+	gpm2: gpm2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -307,7 +312,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm3: gpm3 {
+	gpm3: gpm3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -315,7 +320,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpm4: gpm4 {
+	gpm4: gpm4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -323,29 +328,41 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
-				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
 		interrupt-controller;
 		interrupt-parent = <&gic>;
-		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
-				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -353,7 +370,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -361,131 +378,166 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_cd: sd0-cd {
+	sd0_cd: sd0-cd-pins {
 		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_cd: sd1-cd {
+	sd1_cd: sd1-cd-pins {
 		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_io: cam-port-b-io {
+	cam_port_b_io: cam-port-b-io-pins {
 		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
 				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
 				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	cam_port_b_clk_active: cam-port-b-clk-active {
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
 	};
 
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
 		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c0: fimc-is-i2c0 {
+	fimc_is_i2c0: fimc-is-i2c0-pins {
 		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_i2c1: fimc-is-i2c1 {
+	fimc_is_i2c1: fimc-is-i2c1-pins {
 		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	fimc_is_uart: fimc-is-uart {
+	fimc_is_uart: fimc-is-uart-pins {
 		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 031853b75528..88fb3e68ff02 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos3250 based Rinato board device tree source
  *
@@ -6,14 +7,11 @@
  *
  * Device tree source file for Samsung's Rinato board which is based on
  * Samsung Exynos3250 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
 #include "exynos3250.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
@@ -21,46 +19,60 @@
 / {
 	model = "Samsung Rinato board";
 	compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
+	chassis-type = "watch";
 
 	aliases {
 		i2c7 = &i2c_max77836;
+		mmc0 = &mshc_0;
+		mmc1 = &mshc_1;
+	};
+
+	chosen {
+		stdout-path = &serial_1;
 	};
 
-	memory {
-		reg =  <0x40000000 0x1ff00000>;
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x1ff00000>;
 	};
 
-	firmware@0205F000 {
+	firmware@205f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0205F000 0x1000>;
+		reg = <0x0205f000 0x1000>;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		power_key {
+		power-key {
 			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
+	wlan_pwrseq: mshc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+	};
+
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		max77836: subpmic@25 {
+		max77836: pmic@25 {
 			compatible = "maxim,max77836";
 			interrupt-parent = <&gpx1>;
-			interrupts = <5 0>;
+			interrupts = <5 IRQ_TYPE_NONE>;
 			reg = <0x25>;
-			wakeup;
+			wakeup-source;
 
-			muic: max77836-muic {
+			extcon {
 				compatible = "maxim,max77836-muic";
 			};
 
@@ -107,6 +119,23 @@
 		min-microvolt = <1100000>;
 		max-microvolt = <2700000>;
 	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 500MHz */
+					cooling-device = <&cpu0 5 5>,
+							 <&cpu1 5 5>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 8 8>,
+							 <&cpu1 8 8>;
+				};
+			};
+		};
+	};
 };
 
 &adc {
@@ -116,7 +145,7 @@
 	assigned-clock-rates = <6000000>;
 
 	thermistor-ap {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -124,7 +153,7 @@
 	};
 
 	thermistor-battery {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <100000>;
 		pulldown-ohm = <100000>;
@@ -132,8 +161,64 @@
 	};
 };
 
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_lcd0 {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mcuisp {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_isp {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peril {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cmu {
+	clocks = <&xusbxti>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &exynos_usbphy {
 	status = "okay";
+	vbus-supply = <&safeout_reg>;
 };
 
 &hsotg {
@@ -146,59 +231,18 @@
 &dsi_0 {
 	vddcore-supply = <&ldo6_reg>;
 	vddio-supply = <&ldo6_reg>;
+	samsung,burst-clock-frequency = <250000000>;
+	samsung,esc-clock-frequency = <20000000>;
 	samsung,pll-clock-frequency = <24000000>;
 	status = "okay";
 
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				remote-endpoint = <&dsi_in>;
-				samsung,burst-clock-frequency = <250000000>;
-				samsung,esc-clock-frequency = <20000000>;
-			};
-		};
-	};
-
 	panel@0 {
 		compatible = "samsung,s6e63j0x03";
 		reg = <0>;
 		vdd3-supply = <&ldo16_reg>;
 		vci-supply = <&ldo20_reg>;
-		reset-gpios = <&gpe0 1 0>;
-		te-gpios = <&gpx0 6 0>;
-		power-on-delay= <30>;
-		power-off-delay= <120>;
-		reset-delay = <5>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <29>;
-		panel-height-mm = <29>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <0>;
-				hactive = <320>;
-				vactive = <320>;
-				hfront-porch = <1>;
-				hback-porch = <1>;
-				hsync-len = <1>;
-				vfront-porch = <150>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-
-		port {
-			dsi_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
+		reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>;
+		te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
 	};
 };
 
@@ -208,11 +252,16 @@
 	i80-if-timings {
 		cs-setup = <0>;
 		wr-setup = <0>;
-		wr-act = <1>;
+		wr-active = <1>;
 		wr-hold = <0>;
 	};
 };
 
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
 &i2c_0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
@@ -221,12 +270,12 @@
 	samsung,i2c-max-bus-freq = <100000>;
 	status = "okay";
 
-	s2mps14_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s2mps14-pmic";
 		interrupt-parent = <&gpx0>;
-		interrupts = <7 0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x66>;
-		wakeup;
+		wakeup-source;
 
 		s2mps14_osc: clocks {
 			compatible = "samsung,s2mps14-clk";
@@ -349,14 +398,14 @@
 				regulator-name = "V_EMMC_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo12_reg: LDO12 {
 				regulator-name = "V_EMMC_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				samsung,ext-control-gpios = <&gpk0 2 0>;
+				samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
 			};
 
 			ldo13_reg: LDO13 {
@@ -555,7 +604,7 @@
 	fuelgauge@36 {
 		compatible = "maxim,max77836-battery";
 		interrupt-parent = <&gpx1>;
-		interrupts = <2 8>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		reg = <0x36>;
 	};
 };
@@ -564,27 +613,20 @@
 	status = "okay";
 };
 
-&mfc {
-	status = "okay";
-};
-
 &jpeg {
 	status = "okay";
 };
 
 &mshc_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	num-slots = <1>;
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
-	desc-num = <4>;
 	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
 	vmmc-supply = <&ldo12_reg>;
 	clock-frequency = <100000000>;
-	clock-freq-min-max = <400000 100000000>;
+	max-frequency = <100000000>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -594,65 +636,63 @@
 	status = "okay";
 };
 
-&serial_0 {
-	assigned-clocks = <&cmu CLK_SCLK_UART0>;
-	assigned-clock-rates = <100000000>;
+&mshc_1 {
 	status = "okay";
-};
 
-&serial_1 {
-	status = "okay";
-};
+	#address-cells = <1>;
+	#size-cells = <0>;
 
-&tmu {
-	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
-};
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+	bus-width = <4>;
 
-&rtc {
-	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-	status = "okay";
-};
+	mmc-pwrseq = <&wlan_pwrseq>;
 
-&ppmu_dmc0 {
-	status = "okay";
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4334-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
 
-	events {
-		ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-		};
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
 	};
 };
 
-&ppmu_dmc1 {
+&serial_0 {
+	assigned-clocks = <&cmu CLK_SCLK_UART0>;
+	assigned-clock-rates = <100000000>;
 	status = "okay";
 
-	events {
-		ppmu_dmc1_3: ppmu-event3-dmc1 {
-			event-name = "ppmu-event3-dmc1";
-		};
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
 	};
 };
 
-&ppmu_leftbus {
+&serial_1 {
 	status = "okay";
-
-	events {
-		ppmu_leftbus_3: ppmu-event3-leftbus {
-			event-name = "ppmu-event3-leftbus";
-		};
-	};
 };
 
-&ppmu_rightbus {
+&tmu {
+	vtmu-supply = <&ldo7_reg>;
 	status = "okay";
+};
 
-	events {
-		ppmu_rightbus_3: ppmu-event3-rightbus {
-			event-name = "ppmu-event3-rightbus";
-		};
-	};
+&rtc {
+	clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
 };
 
 &xusbxti {
@@ -661,7 +701,21 @@
 
 &pinctrl_0 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
+	pinctrl-0 = <&initial0 &sleep0>;
+
+	initial0: initial-state {
+		PIN_IN(gpa1-4, DOWN, LV1);
+		PIN_IN(gpa1-5, DOWN, LV1);
+
+		PIN_IN(gpc0-0, DOWN, LV1);
+		PIN_IN(gpc0-1, DOWN, LV1);
+		PIN_IN(gpc0-2, DOWN, LV1);
+		PIN_IN(gpc0-3, DOWN, LV1);
+		PIN_IN(gpc0-4, DOWN, LV1);
+
+		PIN_IN(gpd0-0, DOWN, LV1);
+		PIN_IN(gpd0-1, DOWN, LV1);
+	};
 
 	sleep0: sleep-state {
 		PIN_SLP(gpa0-0, INPUT, DOWN);
@@ -715,7 +769,60 @@
 
 &pinctrl_1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
+	pinctrl-0 = <&initial1 &sleep1>;
+
+	initial1: initial-state {
+		PIN_IN(gpe0-6, DOWN, LV1);
+		PIN_IN(gpe0-7, DOWN, LV1);
+
+		PIN_IN(gpe1-0, DOWN, LV1);
+		PIN_IN(gpe1-3, DOWN, LV1);
+		PIN_IN(gpe1-4, DOWN, LV1);
+		PIN_IN(gpe1-5, DOWN, LV1);
+		PIN_IN(gpe1-6, DOWN, LV1);
+
+		PIN_IN(gpk2-0, DOWN, LV1);
+		PIN_IN(gpk2-1, DOWN, LV1);
+		PIN_IN(gpk2-2, DOWN, LV1);
+		PIN_IN(gpk2-3, DOWN, LV1);
+		PIN_IN(gpk2-4, DOWN, LV1);
+		PIN_IN(gpk2-5, DOWN, LV1);
+		PIN_IN(gpk2-6, DOWN, LV1);
+
+		PIN_IN(gpm0-0, DOWN, LV1);
+		PIN_IN(gpm0-1, DOWN, LV1);
+		PIN_IN(gpm0-2, DOWN, LV1);
+		PIN_IN(gpm0-3, DOWN, LV1);
+		PIN_IN(gpm0-4, DOWN, LV1);
+		PIN_IN(gpm0-5, DOWN, LV1);
+		PIN_IN(gpm0-6, DOWN, LV1);
+		PIN_IN(gpm0-7, DOWN, LV1);
+
+		PIN_IN(gpm1-0, DOWN, LV1);
+		PIN_IN(gpm1-1, DOWN, LV1);
+		PIN_IN(gpm1-2, DOWN, LV1);
+		PIN_IN(gpm1-3, DOWN, LV1);
+		PIN_IN(gpm1-4, DOWN, LV1);
+		PIN_IN(gpm1-5, DOWN, LV1);
+		PIN_IN(gpm1-6, DOWN, LV1);
+
+		PIN_IN(gpm2-0, DOWN, LV1);
+		PIN_IN(gpm2-1, DOWN, LV1);
+
+		PIN_IN(gpm3-0, DOWN, LV1);
+		PIN_IN(gpm3-1, DOWN, LV1);
+		PIN_IN(gpm3-2, DOWN, LV1);
+		PIN_IN(gpm3-3, DOWN, LV1);
+		PIN_IN(gpm3-4, DOWN, LV1);
+
+		PIN_IN(gpm4-1, DOWN, LV1);
+		PIN_IN(gpm4-2, DOWN, LV1);
+		PIN_IN(gpm4-3, DOWN, LV1);
+		PIN_IN(gpm4-4, DOWN, LV1);
+		PIN_IN(gpm4-5, DOWN, LV1);
+		PIN_IN(gpm4-6, DOWN, LV1);
+		PIN_IN(gpm4-7, DOWN, LV1);
+	};
 
 	sleep1: sleep-state {
 		PIN_SLP(gpe0-0, PREV, NONE);
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index d7201333e3bc..bd37f1b587f0 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos3250 SoC device tree source
  *
@@ -11,25 +12,22 @@
  * Note: This file does not include device nodes for all the controllers in
  * Exynos3250 SoC. As device tree coverage for Exynos3250 increases, additional
  * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos3250.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos3250";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		i2c0 = &i2c_0;
@@ -42,17 +40,196 @@
 		i2c7 = &i2c_7;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
+		serial2 = &serial_2;
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu_dmc CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <800000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+				opp-microvolt = <825000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <875000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_isp: bus-isp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_266>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_isp_opp_table>;
+		status = "disabled";
+
+		bus_isp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mcuisp: bus-mcuisp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_mcuisp_opp_table>;
+		status = "disabled";
+
+		bus_mcuisp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peril: bus-peril {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_ACLK_100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peril_opp_table>;
+		status = "disabled";
+
+		bus_peril_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-80000000 {
+				opp-hz = /bits/ 64 <80000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&cmu CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0>;
 			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
 		};
 
 		cpu1: cpu@1 {
@@ -60,59 +237,96 @@
 			compatible = "arm,cortex-a7";
 			reg = <1>;
 			clock-frequency = <1000000000>;
+			clocks = <&cmu CLK_ARM_CLK>;
+			clock-names = "cpu";
+			#cooling-cells = <2>;
+
+			operating-points = <
+				1000000 1150000
+				900000  1112500
+				800000  1075000
+				700000  1037500
+				600000  1000000
+				500000  962500
+				400000  925000
+				300000  887500
+				200000  850000
+				100000  850000
+			>;
 		};
 	};
 
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
+	xusbxti: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xusbxti";
+	};
 
-		fixed-rate-clocks {
-			#address-cells = <1>;
-			#size-cells = <0>;
+	xxti: clock-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xxti";
+	};
 
-			xusbxti: clock@0 {
-				compatible = "fixed-clock";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xusbxti";
-			};
+	xtcxo: clock-2 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xtcxo";
+	};
 
-			xxti: clock@1 {
-				compatible = "fixed-clock";
-				reg = <1>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xxti";
-			};
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
 
-			xtcxo: clock@2 {
-				compatible = "fixed-clock";
-				reg = <2>;
-				clock-frequency = <0>;
-				#clock-cells = <0>;
-				clock-output-names = "xtcxo";
-			};
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-80000000 {
+			opp-hz = /bits/ 64 <80000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <1000000>;
 		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+	};
 
-		sysram@02020000 {
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		sram@2020000 {
 			compatible = "mmio-sram";
 			reg = <0x02020000 0x40000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x02020000 0x40000>;
 
-			smp-sysram@0 {
+			smp-sram@0 {
 				compatible = "samsung,exynos4210-sysram";
 				reg = <0x0 0x1000>;
 			};
 
-			smp-sysram@3f000 {
+			smp-sram@3f000 {
 				compatible = "samsung,exynos4210-sysram-ns";
 				reg = <0x3f000 0x1000>;
 			};
@@ -129,47 +343,54 @@
 		};
 
 		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos3250-pmu", "syscon";
+			compatible = "samsung,exynos3250-pmu", "simple-mfd", "syscon";
 			reg = <0x10020000 0x4000>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			interrupt-parent = <&gic>;
-		};
+			clock-names = "clkout8";
+			clocks = <&cmu CLK_FIN_PLL>;
+			#clock-cells = <1>;
 
-		mipi_phy: video-phy@10020710 {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			reg = <0x10020710 8>;
-			#phy-cells = <1>;
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
-		pd_cam: cam-power-domain@10023C00 {
+		pd_cam: power-domain@10023c00 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C00 0x20>;
+			reg = <0x10023c00 0x20>;
 			#power-domain-cells = <0>;
+			label = "CAM";
 		};
 
-		pd_mfc: mfc-power-domain@10023C40 {
+		pd_mfc: power-domain@10023c40 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C40 0x20>;
+			reg = <0x10023c40 0x20>;
 			#power-domain-cells = <0>;
+			label = "MFC";
 		};
 
-		pd_g3d: g3d-power-domain@10023C60 {
+		pd_g3d: power-domain@10023c60 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C60 0x20>;
+			reg = <0x10023c60 0x20>;
 			#power-domain-cells = <0>;
+			label = "G3D";
 		};
 
-		pd_lcd0: lcd0-power-domain@10023C80 {
+		pd_lcd0: power-domain@10023c80 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023C80 0x20>;
+			reg = <0x10023c80 0x20>;
 			#power-domain-cells = <0>;
+			label = "LCD0";
 		};
 
-		pd_isp: isp-power-domain@10023CA0 {
+		pd_isp: power-domain@10023ca0 {
 			compatible = "samsung,exynos4210-pd";
-			reg = <0x10023CA0 0x20>;
+			reg = <0x10023ca0 0x20>;
 			#power-domain-cells = <0>;
+			label = "ISP";
 		};
 
 		cmu: clock-controller@10030000 {
@@ -182,27 +403,28 @@
 						 <&cmu CLK_FIN_PLL>;
 		};
 
-		cmu_dmc: clock-controller@105C0000 {
+		cmu_dmc: clock-controller@105c0000 {
 			compatible = "samsung,exynos3250-cmu-dmc";
-			reg = <0x105C0000 0x2000>;
+			reg = <0x105c0000 0x2000>;
 			#clock-cells = <1>;
 		};
 
 		rtc: rtc@10070000 {
 			compatible = "samsung,s3c6410-rtc";
 			reg = <0x10070000 0x100>;
-			interrupts = <0 73 0>, <0 74 0>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-parent = <&pmu_system_controller>;
 			status = "disabled";
 		};
 
-		tmu: tmu@100C0000 {
+		tmu: tmu@100c0000 {
 			compatible = "samsung,exynos3250-tmu";
-			reg = <0x100C0000 0x100>;
-			interrupts = <0 216 0>;
+			reg = <0x100c0000 0x100>;
+			interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_TMU_APBIF>;
 			clock-names = "tmu_apbif";
-			#include "exynos4412-tmu-sensor-conf.dtsi"
+			#thermal-sensor-cells = <0>;
 			status = "disabled";
 		};
 
@@ -211,17 +433,25 @@
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x10481000 0x1000>,
-			      <0x10482000 0x1000>,
+			      <0x10482000 0x2000>,
 			      <0x10484000 0x2000>,
 			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
-		mct@10050000 {
-			compatible = "samsung,exynos4210-mct";
+		timer@10050000 {
+			compatible = "samsung,exynos3250-mct",
+				     "samsung,exynos4210-mct";
 			reg = <0x10050000 0x800>;
-			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
-				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+			interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
 			clock-names = "fin_pll", "mct";
 		};
@@ -229,24 +459,24 @@
 		pinctrl_1: pinctrl@11000000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 0>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupts = <0 48 0>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_0: pinctrl@11400000 {
 			compatible = "samsung,exynos3250-pinctrl";
 			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 0>;
+			interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
 		jpeg: codec@11830000 {
 			compatible = "samsung,exynos3250-jpeg";
 			reg = <0x11830000 0x1000>;
-			interrupts = <0 171 0>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
 			clock-names = "jpeg", "sclk";
 			power-domains = <&pd_cam>;
@@ -257,10 +487,10 @@
 			status = "disabled";
 		};
 
-		sysmmu_jpeg: sysmmu@11A60000 {
+		sysmmu_jpeg: sysmmu@11a60000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11a60000 0x1000>;
-			interrupts = <0 156 0>, <0 161 0>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
 			power-domains = <&pd_cam>;
@@ -271,7 +501,9 @@
 			compatible = "samsung,exynos3250-fimd";
 			reg = <0x11c00000 0x30000>;
 			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
 			clock-names = "sclk_fimd", "fimd";
 			power-domains = <&pd_lcd0>;
@@ -280,10 +512,10 @@
 			status = "disabled";
 		};
 
-		dsi_0: dsi@11C80000 {
+		dsi_0: dsi@11c80000 {
 			compatible = "samsung,exynos3250-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
-			interrupts = <0 83 0>;
+			reg = <0x11c80000 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			samsung,phy-type = <0>;
 			power-domains = <&pd_lcd0>;
 			phys = <&mipi_phy 1>;
@@ -295,20 +527,20 @@
 			status = "disabled";
 		};
 
-		sysmmu_fimd0: sysmmu@11E20000 {
+		sysmmu_fimd0: sysmmu@11e20000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x11e20000 0x1000>;
-			interrupts = <0 80 0>, <0 81 0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
 			power-domains = <&pd_lcd0>;
 			#iommu-cells = <0>;
 		};
 
-		hsotg: hsotg@12480000 {
-			compatible = "snps,dwc2";
+		hsotg: usb@12480000 {
+			compatible = "samsung,s3c6400-hsotg";
 			reg = <0x12480000 0x20000>;
-			interrupts = <0 141 0>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_USBOTG>;
 			clock-names = "otg";
 			phys = <&exynos_usbphy 0>;
@@ -316,10 +548,10 @@
 			status = "disabled";
 		};
 
-		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5250-dw-mshc";
+		mshc_0: mmc@12510000 {
+			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 0>;
+			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -328,10 +560,10 @@
 			status = "disabled";
 		};
 
-		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5250-dw-mshc";
+		mshc_1: mmc@12520000 {
+			compatible = "samsung,exynos5420-dw-mshc";
 			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 0>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
 			clock-names = "biu", "ciu";
 			fifo-depth = <0x80>;
@@ -340,9 +572,21 @@
 			status = "disabled";
 		};
 
-		exynos_usbphy: exynos-usbphy@125B0000 {
+		mshc_2: mmc@12530000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12530000 0x1000>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		exynos_usbphy: usb-phy@125b0000 {
 			compatible = "samsung,exynos3250-usb2-phy";
-			reg = <0x125B0000 0x100>;
+			reg = <0x125b0000 0x100>;
 			samsung,pmureg-phandle = <&pmu_system_controller>;
 			clocks = <&cmu CLK_USBOTG>, <&cmu CLK_SCLK_UPLL>;
 			clock-names = "phy", "ref";
@@ -350,63 +594,82 @@
 			status = "disabled";
 		};
 
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 0>;
-				clocks = <&cmu CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma0: dma-controller@12680000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12680000 0x1000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
 
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 0>;
-				clocks = <&cmu CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
+		pdma1: dma-controller@12690000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x12690000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
 		};
 
-		adc: adc@126C0000 {
-			compatible = "samsung,exynos3250-adc",
-				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>;
-			interrupts = <0 137 0>;
+		adc: adc@126c0000 {
+			compatible = "samsung,exynos3250-adc";
+			reg = <0x126c0000 0x100>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "adc", "sclk";
 			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
 			#io-channel-cells = <1>;
-			io-channel-ranges;
 			samsung,syscon-phandle = <&pmu_system_controller>;
 			status = "disabled";
 		};
 
+		gpu: gpu@13000000 {
+			compatible = "samsung,exynos4210-mali", "arm,mali-400";
+			reg = <0x13000000 0x10000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "gp",
+					  "gpmmu",
+					  "pp0",
+					  "ppmmu0",
+					  "pp1",
+					  "ppmmu1",
+					  "pp2",
+					  "ppmmu2",
+					  "pp3",
+					  "ppmmu3",
+					  "pmu";
+			clocks = <&cmu CLK_G3D>,
+				 <&cmu CLK_SCLK_G3D>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_g3d>;
+			status = "disabled";
+			/* TODO: operating points for DVFS, assigned clock as 134 MHz */
+		};
+
 		mfc: codec@13400000 {
-			compatible = "samsung,mfc-v7";
+			compatible = "samsung,exynos3250-mfc", "samsung,mfc-v7";
 			reg = <0x13400000 0x10000>;
-			interrupts = <0 102 0>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "mfc", "sclk_mfc";
 			clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
 			power-domains = <&pd_mfc>;
 			iommus = <&sysmmu_mfc>;
-			status = "disabled";
 		};
 
 		sysmmu_mfc: sysmmu@13620000 {
 			compatible = "samsung,exynos-sysmmu";
 			reg = <0x13620000 0x1000>;
-			interrupts = <0 96 0>, <0 98 0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "sysmmu", "master";
 			clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
 			power-domains = <&pd_mfc>;
@@ -416,7 +679,7 @@
 		serial_0: serial@13800000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13800000 0x100>;
-			interrupts = <0 109 0>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -427,7 +690,7 @@
 		serial_1: serial@13810000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x13810000 0x100>;
-			interrupts = <0 110 0>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			pinctrl-names = "default";
@@ -435,12 +698,23 @@
 			status = "disabled";
 		};
 
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart2_data>;
+			status = "disabled";
+		};
+
 		i2c_0: i2c@13860000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13860000 0x100>;
-			interrupts = <0 113 0>;
+			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C0>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -453,7 +727,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13870000 0x100>;
-			interrupts = <0 114 0>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C1>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -466,7 +740,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13880000 0x100>;
-			interrupts = <0 115 0>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C2>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -479,7 +753,7 @@
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
 			reg = <0x13890000 0x100>;
-			interrupts = <0 116 0>;
+			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C3>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -487,12 +761,12 @@
 			status = "disabled";
 		};
 
-		i2c_4: i2c@138A0000 {
+		i2c_4: i2c@138a0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 0>;
+			reg = <0x138a0000 0x100>;
+			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C4>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -500,12 +774,12 @@
 			status = "disabled";
 		};
 
-		i2c_5: i2c@138B0000 {
+		i2c_5: i2c@138b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 0>;
+			reg = <0x138b0000 0x100>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C5>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -513,12 +787,12 @@
 			status = "disabled";
 		};
 
-		i2c_6: i2c@138C0000 {
+		i2c_6: i2c@138c0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 0>;
+			reg = <0x138c0000 0x100>;
+			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C6>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -526,12 +800,12 @@
 			status = "disabled";
 		};
 
-		i2c_7: i2c@138D0000 {
+		i2c_7: i2c@138d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 0>;
+			reg = <0x138d0000 0x100>;
+			interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2C7>;
 			clock-names = "i2c";
 			pinctrl-names = "default";
@@ -542,7 +816,7 @@
 		spi_0: spi@13920000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13920000 0x100>;
-			interrupts = <0 121 0>;
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma0 7>, <&pdma0 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -558,7 +832,7 @@
 		spi_1: spi@13930000 {
 			compatible = "samsung,exynos4210-spi";
 			reg = <0x13930000 0x100>;
-			interrupts = <0 122 0>;
+			interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&pdma1 7>, <&pdma1 6>;
 			dma-names = "tx", "rx";
 			#address-cells = <1>;
@@ -574,7 +848,7 @@
 		i2s2: i2s@13970000 {
 			compatible = "samsung,s3c6410-i2s";
 			reg = <0x13970000 0x100>;
-			interrupts = <0 126 0>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
 			clock-names = "iis", "i2s_opclk0";
 			dmas = <&pdma0 14>, <&pdma0 13>;
@@ -584,39 +858,37 @@
 			status = "disabled";
 		};
 
-		pwm: pwm@139D0000 {
+		pwm: pwm@139d0000 {
 			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-				     <0 107 0>, <0 108 0>;
+			reg = <0x139d0000 0x1000>;
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			#pwm-cells = <3>;
 			status = "disabled";
 		};
 
-		pmu {
-			compatible = "arm,cortex-a7-pmu";
-			interrupts = <0 18 0>, <0 19 0>;
-		};
-
-		ppmu_dmc0: ppmu_dmc0@106a0000 {
+		ppmu_dmc0: ppmu@106a0000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x106a0000 0x2000>;
 			status = "disabled";
 		};
 
-		ppmu_dmc1: ppmu_dmc1@106b0000 {
+		ppmu_dmc1: ppmu@106b0000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x106b0000 0x2000>;
 			status = "disabled";
 		};
 
-		ppmu_cpu: ppmu_cpu@106c0000 {
+		ppmu_cpu: ppmu@106c0000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x106c0000 0x2000>;
 			status = "disabled";
 		};
 
-		ppmu_rightbus: ppmu_rightbus@112a0000 {
+		ppmu_rightbus: ppmu@112a0000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x112a0000 0x2000>;
 			clocks = <&cmu CLK_PPMURIGHT>;
@@ -624,7 +896,7 @@
 			status = "disabled";
 		};
 
-		ppmu_leftbus: ppmu_leftbus0@116a0000 {
+		ppmu_leftbus: ppmu@116a0000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x116a0000 0x2000>;
 			clocks = <&cmu CLK_PPMULEFT>;
@@ -632,7 +904,7 @@
 			status = "disabled";
 		};
 
-		ppmu_camif: ppmu_camif@11ac0000 {
+		ppmu_camif: ppmu@11ac0000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x11ac0000 0x2000>;
 			clocks = <&cmu CLK_PPMUCAMIF>;
@@ -640,7 +912,7 @@
 			status = "disabled";
 		};
 
-		ppmu_lcd0: ppmu_lcd0@11e40000 {
+		ppmu_lcd0: ppmu@11e40000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x11e40000 0x2000>;
 			clocks = <&cmu CLK_PPMULCD0>;
@@ -648,7 +920,7 @@
 			status = "disabled";
 		};
 
-		ppmu_fsys: ppmu_fsys@12630000 {
+		ppmu_fsys: ppmu@12630000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x12630000 0x2000>;
 			clocks = <&cmu CLK_PPMUFILE>;
@@ -656,7 +928,7 @@
 			status = "disabled";
 		};
 
-		ppmu_g3d: ppmu_g3d@13220000 {
+		ppmu_g3d: ppmu@13220000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x13220000 0x2000>;
 			clocks = <&cmu CLK_PPMUG3D>;
@@ -664,7 +936,7 @@
 			status = "disabled";
 		};
 
-		ppmu_mfc: ppmu_mfc@13660000 {
+		ppmu_mfc: ppmu@13660000 {
 			compatible = "samsung,exynos-ppmu";
 			reg = <0x13660000 0x2000>;
 			clocks = <&cmu CLK_PPMUMFC_L>;
@@ -675,3 +947,4 @@
 };
 
 #include "exynos3250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
index 735cb2f10817..27a1a8952665 100644
--- a/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/exynos4-cpu-thermal.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device tree sources for Exynos4 thermal zone
  *
  * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <dt-bindings/thermal/thermal.h>
@@ -14,7 +10,7 @@
 / {
 thermal-zones {
 	cpu_thermal: cpu-thermal {
-		thermal-sensors = <&tmu 0>;
+		thermal-sensors = <&tmu>;
 		polling-delay-passive = <0>;
 		polling-delay = <0>;
 		trips {
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index b0d52b1a646a..8dd6976ab0a7 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4 SoC series common device tree source
  *
@@ -13,18 +14,17 @@
  * Note: This file does not include device nodes for all the controllers in
  * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional
  * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include <dt-bindings/clock/exynos4.h>
 #include <dt-bindings/clock/exynos-audss-clk.h>
-#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
 		spi0 = &spi_0;
@@ -51,898 +51,957 @@
 		serial3 = &serial_3;
 	};
 
-	clock_audss: clock-controller@03810000 {
-		compatible = "samsung,exynos4210-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		reg = <0x03830000 0x100>;
-		clocks = <&clock_audss EXYNOS_I2S_BUS>;
-		clock-names = "iis";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk0";
-		dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
-		dma-names = "tx", "rx", "tx-sec";
-		samsung,idma-addr = <0x03000000>;
-		#sound-dai-cells = <1>;
+	pmu: pmu {
+		compatible = "arm,cortex-a9-pmu";
+		interrupt-parent = <&combiner>;
 		status = "disabled";
 	};
 
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
-
-	mipi_phy: video-phy@10020710 {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		#phy-cells = <1>;
-		syscon = <&pmu_system_controller>;
-	};
-
-	pd_mfc: mfc-power-domain@10023C40 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C40 0x20>;
-		#power-domain-cells = <0>;
-	};
-
-	pd_g3d: g3d-power-domain@10023C60 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C60 0x20>;
-		#power-domain-cells = <0>;
-	};
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-	pd_lcd0: lcd0-power-domain@10023C80 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C80 0x20>;
-		#power-domain-cells = <0>;
-	};
+		clock_audss: clock-controller@3810000 {
+			compatible = "samsung,exynos4210-audss-clock";
+			reg = <0x03810000 0x0c>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_SCLK_AUDIO0>,
+				 <&clock CLK_SCLK_AUDIO0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio",
+				      "sclk_pcm_in";
+		};
 
-	pd_tv: tv-power-domain@10023C20 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C20 0x20>;
-		#power-domain-cells = <0>;
-		power-domains = <&pd_lcd0>;
-	};
+		i2s0: i2s@3830000 {
+			compatible = "samsung,s5pv210-i2s";
+			reg = <0x03830000 0x100>;
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+				 <&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
+			dma-names = "tx", "rx", "tx-sec";
+			samsung,idma-addr = <0x03000000>;
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
 
-	pd_cam: cam-power-domain@10023C00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023C00 0x20>;
-		#power-domain-cells = <0>;
-	};
+		chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
 
-	pd_gps: gps-power-domain@10023CE0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CE0 0x20>;
-		#power-domain-cells = <0>;
-	};
+		scu: snoop-control-unit@10500000 {
+			compatible = "arm,cortex-a9-scu";
+			reg = <0x10500000 0x2000>;
+		};
 
-	pd_gps_alive: gps-alive-power-domain@10023D00 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023D00 0x20>;
-		#power-domain-cells = <0>;
-	};
+		memory-controller@12570000 {
+			compatible = "samsung,exynos4210-srom";
+			reg = <0x12570000 0x14>;
+		};
 
-	gic: interrupt-controller@10490000 {
-		compatible = "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
-	};
+		pd_mfc: power-domain@10023c40 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023c40 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
 
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		reg = <0x10440000 0x1000>;
-	};
+		pd_g3d: power-domain@10023c60 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023c60 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
 
-	pmu {
-		compatible = "arm,cortex-a9-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>, <3 2>;
-	};
+		pd_lcd0: power-domain@10023c80 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023c80 0x20>;
+			#power-domain-cells = <0>;
+			label = "LCD0";
+		};
 
-	sys_reg: syscon@10010000 {
-		compatible = "samsung,exynos4-sysreg", "syscon";
-		reg = <0x10010000 0x400>;
-	};
+		pd_tv: power-domain@10023c20 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023c20 0x20>;
+			#power-domain-cells = <0>;
+			power-domains = <&pd_lcd0>;
+			label = "TV";
+		};
 
-	pmu_system_controller: system-controller@10020000 {
-		compatible = "samsung,exynos4210-pmu", "syscon";
-		reg = <0x10020000 0x4000>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+		pd_cam: power-domain@10023c00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023c00 0x20>;
+			#power-domain-cells = <0>;
+			label = "CAM";
+		};
 
-	dsi_0: dsi@11C80000 {
-		compatible = "samsung,exynos4210-mipi-dsi";
-		reg = <0x11C80000 0x10000>;
-		interrupts = <0 79 0>;
-		power-domains = <&pd_lcd0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
-		clock-names = "bus_clk", "sclk_mipi";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
+		pd_gps: power-domain@10023ce0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023ce0 0x20>;
+			#power-domain-cells = <0>;
+			label = "GPS";
+		};
 
-	camera {
-		compatible = "samsung,fimc", "simple-bus";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		#clock-cells = <1>;
-		clock-output-names = "cam_a_clkout", "cam_b_clkout";
-		ranges;
+		pd_gps_alive: power-domain@10023d00 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023d00 0x20>;
+			#power-domain-cells = <0>;
+			label = "GPS alive";
+		};
 
-		fimc_0: fimc@11800000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11800000 0x1000>;
-			interrupts = <0 84 0>;
-			clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc0>;
-			status = "disabled";
+		gic: interrupt-controller@10490000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10490000 0x10000>, <0x10480000 0x10000>;
 		};
 
-		fimc_1: fimc@11810000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11810000 0x1000>;
-			interrupts = <0 85 0>;
-			clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc1>;
-			status = "disabled";
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0x10440000 0x1000>;
 		};
 
-		fimc_2: fimc@11820000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11820000 0x1000>;
-			interrupts = <0 86 0>;
-			clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc2>;
-			status = "disabled";
+		sys_reg: syscon@10010000 {
+			compatible = "samsung,exynos4-sysreg", "syscon";
+			reg = <0x10010000 0x400>;
 		};
 
-		fimc_3: fimc@11830000 {
-			compatible = "samsung,exynos4210-fimc";
-			reg = <0x11830000 0x1000>;
-			interrupts = <0 87 0>;
-			clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
-			clock-names = "fimc", "sclk_fimc";
-			power-domains = <&pd_cam>;
-			samsung,sysreg = <&sys_reg>;
-			iommus = <&sysmmu_fimc3>;
-			status = "disabled";
+		pmu_system_controller: system-controller@10020000 {
+			compatible = "samsung,exynos4210-pmu", "simple-mfd", "syscon";
+			reg = <0x10020000 0x4000>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
 
-		csis_0: csis@11880000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11880000 0x4000>;
-			interrupts = <0 78 0>;
-			clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <4>;
-			power-domains = <&pd_cam>;
-			phys = <&mipi_phy 0>;
-			phy-names = "csis";
+		dsi_0: dsi@11c80000 {
+			compatible = "samsung,exynos4210-mipi-dsi";
+			reg = <0x11c80000 0x10000>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_lcd0>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
+			clock-names = "bus_clk", "sclk_mipi";
 			status = "disabled";
 			#address-cells = <1>;
 			#size-cells = <0>;
 		};
 
-		csis_1: csis@11890000 {
-			compatible = "samsung,exynos4210-csis";
-			reg = <0x11890000 0x4000>;
-			interrupts = <0 80 0>;
-			clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
-			clock-names = "csis", "sclk_csis";
-			bus-width = <2>;
-			power-domains = <&pd_cam>;
-			phys = <&mipi_phy 2>;
-			phy-names = "csis";
+		camera: camera {
+			compatible = "samsung,fimc", "simple-bus";
 			status = "disabled";
 			#address-cells = <1>;
-			#size-cells = <0>;
+			#size-cells = <1>;
+			#clock-cells = <1>;
+			clock-output-names = "cam_a_clkout", "cam_b_clkout";
+			ranges;
+
+			fimc_0: fimc@11800000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11800000 0x1000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC0>,
+					 <&clock CLK_SCLK_FIMC0>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc0>;
+				status = "disabled";
+			};
+
+			fimc_1: fimc@11810000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11810000 0x1000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC1>,
+					 <&clock CLK_SCLK_FIMC1>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc1>;
+				status = "disabled";
+			};
+
+			fimc_2: fimc@11820000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11820000 0x1000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC2>,
+					 <&clock CLK_SCLK_FIMC2>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc2>;
+				status = "disabled";
+			};
+
+			fimc_3: fimc@11830000 {
+				compatible = "samsung,exynos4210-fimc";
+				reg = <0x11830000 0x1000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_FIMC3>,
+					 <&clock CLK_SCLK_FIMC3>;
+				clock-names = "fimc", "sclk_fimc";
+				power-domains = <&pd_cam>;
+				samsung,sysreg = <&sys_reg>;
+				iommus = <&sysmmu_fimc3>;
+				status = "disabled";
+			};
+
+			csis_0: csis@11880000 {
+				compatible = "samsung,exynos4210-csis";
+				reg = <0x11880000 0x4000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_CSIS0>,
+					 <&clock CLK_SCLK_CSIS0>;
+				clock-names = "csis", "sclk_csis";
+				bus-width = <4>;
+				power-domains = <&pd_cam>;
+				phys = <&mipi_phy 0>;
+				phy-names = "csis";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			csis_1: csis@11890000 {
+				compatible = "samsung,exynos4210-csis";
+				reg = <0x11890000 0x4000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clock CLK_CSIS1>,
+					 <&clock CLK_SCLK_CSIS1>;
+				clock-names = "csis", "sclk_csis";
+				bus-width = <2>;
+				power-domains = <&pd_cam>;
+				phys = <&mipi_phy 2>;
+				phy-names = "csis";
+				status = "disabled";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
-	};
 
-	watchdog: watchdog@10060000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 43 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		status = "disabled";
-	};
+		rtc: rtc@10070000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x10070000 0x100>;
+			interrupt-parent = <&pmu_system_controller>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_RTC>;
+			clock-names = "rtc";
+			status = "disabled";
+		};
 
-	rtc: rtc@10070000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x10070000 0x100>;
-		interrupt-parent = <&pmu_system_controller>;
-		interrupts = <0 44 0>, <0 45 0>;
-		clocks = <&clock CLK_RTC>;
-		clock-names = "rtc";
-		status = "disabled";
-	};
+		keypad: keypad@100a0000 {
+			compatible = "samsung,s5pv210-keypad";
+			reg = <0x100a0000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_KEYIF>;
+			clock-names = "keypad";
+			status = "disabled";
+		};
 
-	keypad: keypad@100A0000 {
-		compatible = "samsung,s5pv210-keypad";
-		reg = <0x100A0000 0x100>;
-		interrupts = <0 109 0>;
-		clocks = <&clock CLK_KEYIF>;
-		clock-names = "keypad";
-		status = "disabled";
-	};
+		sdhci_0: mmc@12510000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12510000 0x100>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
 
-	sdhci_0: sdhci@12510000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12510000 0x100>;
-		interrupts = <0 73 0>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
+		sdhci_1: mmc@12520000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12520000 0x100>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
 
-	sdhci_1: sdhci@12520000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12520000 0x100>;
-		interrupts = <0 74 0>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
+		sdhci_2: mmc@12530000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12530000 0x100>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
 
-	sdhci_2: sdhci@12530000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12530000 0x100>;
-		interrupts = <0 75 0>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
+		sdhci_3: mmc@12540000 {
+			compatible = "samsung,exynos4210-sdhci";
+			reg = <0x12540000 0x100>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+			clock-names = "hsmmc", "mmc_busclk.2";
+			status = "disabled";
+		};
 
-	sdhci_3: sdhci@12540000 {
-		compatible = "samsung,exynos4210-sdhci";
-		reg = <0x12540000 0x100>;
-		interrupts = <0 76 0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "hsmmc", "mmc_busclk.2";
-		status = "disabled";
-	};
+		exynos_usbphy: usb-phy@125b0000 {
+			compatible = "samsung,exynos4210-usb2-phy";
+			reg = <0x125b0000 0x100>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+			clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			status = "disabled";
+		};
 
-	exynos_usbphy: exynos-usbphy@125B0000 {
-		compatible = "samsung,exynos4210-usb2-phy";
-		reg = <0x125B0000 0x100>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-		clocks = <&clock CLK_USB_DEVICE>, <&clock CLK_XUSBXTI>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		status = "disabled";
-	};
+		hsotg: usb@12480000 {
+			compatible = "samsung,s3c6400-hsotg";
+			reg = <0x12480000 0x20000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_USB_DEVICE>;
+			clock-names = "otg";
+			phys = <&exynos_usbphy 0>;
+			phy-names = "usb2-phy";
+			status = "disabled";
+		};
 
-	hsotg: hsotg@12480000 {
-		compatible = "samsung,s3c6400-hsotg";
-		reg = <0x12480000 0x20000>;
-		interrupts = <0 71 0>;
-		clocks = <&clock CLK_USB_DEVICE>;
-		clock-names = "otg";
-		phys = <&exynos_usbphy 0>;
-		phy-names = "usb2-phy";
-		status = "disabled";
-	};
+		ehci: usb@12580000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12580000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_USB_HOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			phys = <&exynos_usbphy 1>, <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+			phy-names = "host", "hsic0", "hsic1";
+		};
 
-	ehci: ehci@12580000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12580000 0x100>;
-		interrupts = <0 70 0>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-		    reg = <0>;
-		    phys = <&exynos_usbphy 1>;
-		    status = "disabled";
-		};
-		port@1 {
-		    reg = <1>;
-		    phys = <&exynos_usbphy 2>;
-		    status = "disabled";
-		};
-		port@2 {
-		    reg = <2>;
-		    phys = <&exynos_usbphy 3>;
-		    status = "disabled";
+		ohci: usb@12590000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12590000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_USB_HOST>;
+			clock-names = "usbhost";
+			status = "disabled";
+			phys = <&exynos_usbphy 1>;
+			phy-names = "host";
 		};
-	};
 
-	ohci: ohci@12590000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12590000 0x100>;
-		interrupts = <0 70 0>;
-		clocks = <&clock CLK_USB_HOST>;
-		clock-names = "usbhost";
-		status = "disabled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-		    reg = <0>;
-		    phys = <&exynos_usbphy 1>;
-		    status = "disabled";
+		gpu: gpu@13000000 {
+			compatible = "samsung,exynos4210-mali", "arm,mali-400";
+			reg = <0x13000000 0x10000>;
+			/*
+			 * CLK_G3D is not actually bus clock but a IP-level clock.
+			 * The bus clock is not described in hardware manual.
+			 */
+			clocks = <&clock CLK_G3D>,
+				 <&clock CLK_SCLK_G3D>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_g3d>;
+			status = "disabled";
 		};
-	};
 
-	i2s1: i2s@13960000 {
-		compatible = "samsung,s3c6410-i2s";
-		reg = <0x13960000 0x100>;
-		clocks = <&clock CLK_I2S1>;
-		clock-names = "iis";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk1";
-		dmas = <&pdma1 12>, <&pdma1 11>;
-		dma-names = "tx", "rx";
-		#sound-dai-cells = <1>;
-		status = "disabled";
-	};
+		i2s1: i2s@13960000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13960000 0x100>;
+			clocks = <&clock CLK_I2S1>;
+			clock-names = "iis";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk1";
+			dmas = <&pdma1 12>, <&pdma1 11>;
+			dma-names = "tx", "rx";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
 
-	i2s2: i2s@13970000 {
-		compatible = "samsung,s3c6410-i2s";
-		reg = <0x13970000 0x100>;
-		clocks = <&clock CLK_I2S2>;
-		clock-names = "iis";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk2";
-		dmas = <&pdma0 14>, <&pdma0 13>;
-		dma-names = "tx", "rx";
-		#sound-dai-cells = <1>;
-		status = "disabled";
-	};
+		i2s2: i2s@13970000 {
+			compatible = "samsung,s3c6410-i2s";
+			reg = <0x13970000 0x100>;
+			clocks = <&clock CLK_I2S2>;
+			clock-names = "iis";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk2";
+			dmas = <&pdma0 14>, <&pdma0 13>;
+			dma-names = "tx", "rx";
+			#sound-dai-cells = <1>;
+			status = "disabled";
+		};
 
-	mfc: codec@13400000 {
-		compatible = "samsung,mfc-v5";
-		reg = <0x13400000 0x10000>;
-		interrupts = <0 94 0>;
-		power-domains = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
-		clock-names = "mfc", "sclk_mfc";
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-		status = "disabled";
-	};
+		mfc: codec@13400000 {
+			compatible = "samsung,mfc-v5";
+			reg = <0x13400000 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_mfc>;
+			clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+			clock-names = "mfc", "sclk_mfc";
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
 
-	serial_0: serial@13800000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13800000 0x100>;
-		interrupts = <0 52 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
+		serial_0: serial@13800000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13800000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma0 15>, <&pdma0 16>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
 
-	serial_1: serial@13810000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13810000 0x100>;
-		interrupts = <0 53 0>;
-		clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
+		serial_1: serial@13810000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13810000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma1 15>, <&pdma1 16>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
 
-	serial_2: serial@13820000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13820000 0x100>;
-		interrupts = <0 54 0>;
-		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
+		serial_2: serial@13820000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13820000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma0 17>, <&pdma0 18>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
 
-	serial_3: serial@13830000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x13830000 0x100>;
-		interrupts = <0 55 0>;
-		clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
-		clock-names = "uart", "clk_uart_baud0";
-		status = "disabled";
-	};
+		serial_3: serial@13830000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x13830000 0x100>;
+			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+			clock-names = "uart", "clk_uart_baud0";
+			dmas = <&pdma1 17>, <&pdma1 18>;
+			dma-names = "rx", "tx";
+			status = "disabled";
+		};
 
-	i2c_0: i2c@13860000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13860000 0x100>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		status = "disabled";
-	};
+		i2c_0: i2c@13860000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13860000 0x100>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C0>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_bus>;
+			status = "disabled";
+		};
 
-	i2c_1: i2c@13870000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13870000 0x100>;
-		interrupts = <0 59 0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		status = "disabled";
-	};
+		i2c_1: i2c@13870000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13870000 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C1>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_bus>;
+			status = "disabled";
+		};
 
-	i2c_2: i2c@13880000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13880000 0x100>;
-		interrupts = <0 60 0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		status = "disabled";
-	};
+		i2c_2: i2c@13880000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13880000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C2>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_bus>;
+			status = "disabled";
+		};
 
-	i2c_3: i2c@13890000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x13890000 0x100>;
-		interrupts = <0 61 0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		status = "disabled";
-	};
+		i2c_3: i2c@13890000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x13890000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C3>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_bus>;
+			status = "disabled";
+		};
 
-	i2c_4: i2c@138A0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138A0000 0x100>;
-		interrupts = <0 62 0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
+		i2c_4: i2c@138a0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138a0000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
 
-	i2c_5: i2c@138B0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138B0000 0x100>;
-		interrupts = <0 63 0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
+		i2c_5: i2c@138b0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138b0000 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
 
-	i2c_6: i2c@138C0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138C0000 0x100>;
-		interrupts = <0 64 0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
+		i2c_6: i2c@138c0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138c0000 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
 
-	i2c_7: i2c@138D0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x138D0000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
+		i2c_7: i2c@138d0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x138d0000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
 
-	i2c_8: i2c@138E0000 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x138E0000 0x100>;
-		interrupts = <0 93 0>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
+		i2c_8: i2c@138e0000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "samsung,s3c2440-hdmiphy-i2c";
+			reg = <0x138e0000 0x100>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_I2C_HDMI>;
+			clock-names = "i2c";
+			status = "disabled";
 
-		hdmi_i2c_phy: hdmiphy@38 {
-			compatible = "exynos4210-hdmiphy";
-			reg = <0x38>;
+			hdmi_i2c_phy: hdmi-phy@38 {
+				compatible = "samsung,exynos4210-hdmiphy";
+				reg = <0x38>;
+			};
 		};
-	};
-
-	spi_0: spi@13920000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13920000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 7>, <&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		status = "disabled";
-	};
 
-	spi_1: spi@13930000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13930000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 7>, <&pdma1 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		status = "disabled";
-	};
+		spi_0: spi@13920000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13920000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			status = "disabled";
+		};
 
-	spi_2: spi@13940000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x13940000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 9>, <&pdma0 8>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		status = "disabled";
-	};
+		spi_1: spi@13930000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13930000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 7>, <&pdma1 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			status = "disabled";
+		};
 
-	pwm: pwm@139D0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x139D0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-		#pwm-cells = <3>;
-		status = "disabled";
-	};
+		spi_2: spi@13940000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x13940000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 9>, <&pdma0 8>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			status = "disabled";
+		};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
+		pwm: pwm@139d0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x139d0000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PWM>;
+			clock-names = "timers";
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
 
-		pdma0: pdma@12680000 {
+		pdma0: dma-controller@12680000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12680000 0x1000>;
-			interrupts = <0 35 0>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@12690000 {
+		pdma1: dma-controller@12690000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12690000 0x1000>;
-			interrupts = <0 36 0>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma1: mdma@12850000 {
+		mdma1: dma-controller@12850000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x12850000 0x1000>;
-			interrupts = <0 34 0>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
-	};
 
-	fimd: fimd@11c00000 {
-		compatible = "samsung,exynos4210-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x11c00000 0x20000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <11 0>, <11 1>, <11 2>;
-		clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
-		clock-names = "sclk_fimd", "fimd";
-		power-domains = <&pd_lcd0>;
-		iommus = <&sysmmu_fimd0>;
-		samsung,sysreg = <&sys_reg>;
-		status = "disabled";
-	};
+		fimd: fimd@11c00000 {
+			compatible = "samsung,exynos4210-fimd";
+			interrupt-parent = <&combiner>;
+			reg = <0x11c00000 0x20000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <11 0>, <11 1>, <11 2>;
+			clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
+			clock-names = "sclk_fimd", "fimd";
+			power-domains = <&pd_lcd0>;
+			iommus = <&sysmmu_fimd0>;
+			samsung,sysreg = <&sys_reg>;
+			status = "disabled";
+		};
 
-	tmu: tmu@100C0000 {
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		tmu: tmu@100c0000 {
+			interrupt-parent = <&combiner>;
+			reg = <0x100c0000 0x100>;
+			interrupts = <2 4>;
+			status = "disabled";
+			#thermal-sensor-cells = <0>;
+		};
 
-	jpeg_codec: jpeg-codec@11840000 {
-		compatible = "samsung,exynos4210-jpeg";
-		reg = <0x11840000 0x1000>;
-		interrupts = <0 88 0>;
-		clocks = <&clock CLK_JPEG>;
-		clock-names = "jpeg";
-		power-domains = <&pd_cam>;
-	};
+		jpeg_codec: jpeg-codec@11840000 {
+			compatible = "samsung,exynos4210-jpeg";
+			reg = <0x11840000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_JPEG>;
+			clock-names = "jpeg";
+			power-domains = <&pd_cam>;
+			iommus = <&sysmmu_jpeg>;
+		};
 
-	hdmi: hdmi@12D00000 {
-		compatible = "samsung,exynos4210-hdmi";
-		reg = <0x12D00000 0x70000>;
-		interrupts = <0 92 0>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
-			"mout_hdmi";
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			<&clock CLK_MOUT_HDMI>;
-		phy = <&hdmi_i2c_phy>;
-		power-domains = <&pd_tv>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		rotator: rotator@12810000 {
+			compatible = "samsung,exynos4210-rotator";
+			reg = <0x12810000 0x64>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	mixer: mixer@12C10000 {
-		compatible = "samsung,exynos4210-mixer";
-		interrupts = <0 91 0>;
-		reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
-		power-domains = <&pd_tv>;
-		iommus = <&sysmmu_tv>;
-		status = "disabled";
-	};
+		hdmi: hdmi@12d00000 {
+			compatible = "samsung,exynos4210-hdmi";
+			reg = <0x12d00000 0x70000>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				      "sclk_hdmiphy", "mout_hdmi";
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_SCLK_PIXEL>,
+				 <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			phy = <&hdmi_i2c_phy>;
+			power-domains = <&pd_tv>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
 
-	ppmu_dmc0: ppmu_dmc0@106a0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106a0000 0x2000>;
-		clocks = <&clock CLK_PPMUDMC0>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		hdmicec: cec@100b0000 {
+			compatible = "samsung,s5p-cec";
+			reg = <0x100b0000 0x200>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI_CEC>;
+			clock-names = "hdmicec";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			hdmi-phandle = <&hdmi>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_cec>;
+			status = "disabled";
+		};
 
-	ppmu_dmc1: ppmu_dmc1@106b0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106b0000 0x2000>;
-		clocks = <&clock CLK_PPMUDMC1>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		mixer: mixer@12c10000 {
+			compatible = "samsung,exynos4210-mixer";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12c10000 0x2100>, <0x12c00000 0x300>;
+			power-domains = <&pd_tv>;
+			iommus = <&sysmmu_tv>;
+			status = "disabled";
+		};
 
-	ppmu_cpu: ppmu_cpu@106c0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106c0000 0x2000>;
-		clocks = <&clock CLK_PPMUCPU>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_dmc0: ppmu@106a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106a0000 0x2000>;
+			clocks = <&clock CLK_PPMUDMC0>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_acp: ppmu_acp@10ae0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x106e0000 0x2000>;
-		status = "disabled";
-	};
+		ppmu_dmc1: ppmu@106b0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106b0000 0x2000>;
+			clocks = <&clock CLK_PPMUDMC1>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_rightbus: ppmu_rightbus@112a0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x112a0000 0x2000>;
-		clocks = <&clock CLK_PPMURIGHT>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_cpu: ppmu@106c0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x106c0000 0x2000>;
+			clocks = <&clock CLK_PPMUCPU>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_leftbus: ppmu_leftbus0@116a0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x116a0000 0x2000>;
-		clocks = <&clock CLK_PPMULEFT>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_rightbus: ppmu@112a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x112a0000 0x2000>;
+			clocks = <&clock CLK_PPMURIGHT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_camif: ppmu_camif@11ac0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x11ac0000 0x2000>;
-		clocks = <&clock CLK_PPMUCAMIF>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_leftbus: ppmu@116a0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x116a0000 0x2000>;
+			clocks = <&clock CLK_PPMULEFT>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_lcd0: ppmu_lcd0@11e40000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x11e40000 0x2000>;
-		clocks = <&clock CLK_PPMULCD0>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_camif: ppmu@11ac0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11ac0000 0x2000>;
+			clocks = <&clock CLK_PPMUCAMIF>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_fsys: ppmu_g3d@12630000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12630000 0x2000>;
-		status = "disabled";
-	};
+		ppmu_lcd0: ppmu@11e40000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x11e40000 0x2000>;
+			clocks = <&clock CLK_PPMULCD0>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_image: ppmu_image@12aa0000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12aa0000 0x2000>;
-		clocks = <&clock CLK_PPMUIMAGE>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_fsys: ppmu@12630000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12630000 0x2000>;
+			status = "disabled";
+		};
 
-	ppmu_tv: ppmu_tv@12e40000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12e40000 0x2000>;
-		clocks = <&clock CLK_PPMUTV>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_image: ppmu@12aa0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12aa0000 0x2000>;
+			clocks = <&clock CLK_PPMUIMAGE>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_g3d: ppmu_g3d@13220000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x13220000 0x2000>;
-		clocks = <&clock CLK_PPMUG3D>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_tv: ppmu@12e40000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12e40000 0x2000>;
+			clocks = <&clock CLK_PPMUTV>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_mfc_left: ppmu_mfc_left@13660000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x13660000 0x2000>;
-		clocks = <&clock CLK_PPMUMFC_L>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_g3d: ppmu@13220000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13220000 0x2000>;
+			clocks = <&clock CLK_PPMUG3D>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	ppmu_mfc_right: ppmu_mfc_right@13670000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x13670000 0x2000>;
-		clocks = <&clock CLK_PPMUMFC_R>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+		ppmu_mfc_left: ppmu@13660000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13660000 0x2000>;
+			clocks = <&clock CLK_PPMUMFC_L>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	sysmmu_mfc_l: sysmmu@13620000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13620000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		power-domains = <&pd_mfc>;
-		#iommu-cells = <0>;
-	};
+		ppmu_mfc_right: ppmu@13670000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x13670000 0x2000>;
+			clocks = <&clock CLK_PPMUMFC_R>;
+			clock-names = "ppmu";
+			status = "disabled";
+		};
 
-	sysmmu_mfc_r: sysmmu@13630000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13630000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		power-domains = <&pd_mfc>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_l: sysmmu@13620000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13620000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			power-domains = <&pd_mfc>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_tv: sysmmu@12E20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12E20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-		power-domains = <&pd_tv>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_r: sysmmu@13630000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13630000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			power-domains = <&pd_mfc>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc0: sysmmu@11A20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_tv: sysmmu@12e20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12e20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+			power-domains = <&pd_tv>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc1: sysmmu@11A30000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A30000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 3>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc0: sysmmu@11a20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11a20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC0>, <&clock CLK_FIMC0>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc2: sysmmu@11A40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc1: sysmmu@11a30000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11a30000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 3>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC1>, <&clock CLK_FIMC1>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc3: sysmmu@11A50000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A50000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc2: sysmmu@11a40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11a40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC2>, <&clock CLK_FIMC2>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg: sysmmu@11A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		power-domains = <&pd_cam>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc3: sysmmu@11a50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11a50000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC3>, <&clock CLK_FIMC3>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_rotator: sysmmu@12A30000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12A30000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		power-domains = <&pd_lcd0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg: sysmmu@11a60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11a60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			power-domains = <&pd_cam>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimd0: sysmmu@11E20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11E20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
-		power-domains = <&pd_lcd0>;
-		#iommu-cells = <0>;
+		sysmmu_rotator: sysmmu@12a30000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12a30000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>,
+				 <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd0: sysmmu@11e20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11e20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD0>, <&clock CLK_FIMD0>;
+			power-domains = <&pd_lcd0>;
+			#iommu-cells = <0>;
+		};
+
+		sss: sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
+		};
+
+		prng: rng@10830400 {
+			compatible = "samsung,exynos4-rng";
+			reg = <0x10830400 0x200>;
+			clocks = <&clock CLK_SSS>;
+			clock-names = "secss";
+		};
 	};
 };
+
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
new file mode 100644
index 000000000000..37cd4dde53e4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -0,0 +1,860 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
+ * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy S2 (GT-I9100)";
+	compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
+	chassis-type = "handset";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-vol-down {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-vol-up {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-ok {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_OK>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	i2c_max17042_fuel: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+
+		battery@36 {
+			compatible = "maxim,max17042";
+
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+			pinctrl-0 = <&max17042_fuel_irq>;
+			pinctrl-names = "default";
+
+			reg = <0x36>;
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	i2c_s5k5baf: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpc1 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpc1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+
+		image-sensor@2d {
+			compatible = "samsung,s5k5baf";
+			reg = <0x2d>;
+			vdda-supply = <&cam_io_en_reg>;
+			vddreg-supply = <&vt_core_15v_reg>;
+			vddio-supply = <&vtcam_reg>;
+			clocks = <&camera 0>;
+			clock-names = "mclk";
+			stbyn-gpios = <&gpl2 0 GPIO_ACTIVE_LOW>;
+			rstn-gpios = <&gpl2 1 GPIO_ACTIVE_LOW>;
+			clock-frequency = <24000000>;
+
+			port {
+				s5k5bafx_ep: endpoint {
+					remote-endpoint = <&csis1_ep>;
+					data-lanes = <1>;
+				};
+			};
+		};
+	};
+
+	spi-3 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+
+			spi-max-frequency = <1200000>;
+
+			vdd3-supply = <&vmipi_reg>;
+			vci-supply = <&vcclcd_reg>;
+
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on max8997 PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_clk_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>, <&clock CLK_MOUT_CAM1>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>, <&clock CLK_XUSBXTI>;
+};
+
+&csis_1 {
+	status = "okay";
+	vddcore-supply = <&vusb_reg>;
+	vddio-supply = <&vmipi_reg>;
+	clock-frequency = <160000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@4 {
+		reg = <4>;
+		csis1_ep: endpoint {
+			remote-endpoint = <&s5k5bafx_ep>;
+			data-lanes = <1>;
+			samsung,csis-hs-settle = <6>;
+		};
+	};
+};
+
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
+};
+
+&ehci {
+	status = "okay";
+
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+
+	vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	/* Back camera not implemented */
+	status = "disabled";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	/* Back camera not implemented */
+	status = "disabled";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+
+	port@3 {
+		reg = <3>;
+
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	mali-supply = <&vg3d_breg>;
+};
+
+&hsotg {
+	status = "okay";
+
+	dr_mode = "otg";
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+};
+
+&i2c_3 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+
+	pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+						 <950000>,  <900000>,
+						 <1100000>, <1000000>,
+						 <950000>,  <900000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+		pinctrl-names = "default";
+
+		charger-supply = <&charger_reg>;
+
+		regulators {
+			vadc_reg: LDO1 {
+				regulator-name = "VADC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+			};
+			valive_reg: LDO2 {
+				regulator-name = "VALIVE_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+			};
+
+			vusb_reg: LDO3 {
+				regulator-name = "VUSB_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vhsic_reg: LDO5 {
+				regulator-name = "VHSIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vpda_reg: LDO6 {
+				regulator-name = "VCC_1.8V_PDA";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+				regulator-name = "CAM_ISP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+				regulator-name = "VCC_2.8V_PDA";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vtouch_reg: LDO11 {
+				regulator-name = "TOUCH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vmotor_reg: LDO14 {
+				regulator-name = "VCC_2.8V_MOTOR";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vled_reg: LDO15 {
+				regulator-name = "LED_A_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			camsensor_reg: LDO16 {
+				regulator-name = "CAM_SENSOR_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vtf_reg: LDO17 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vtouchled_reg: LDO18 {
+				regulator-name = "TOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vddq_reg: LDO21 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+				regulator-name = "VARM_1.2V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+				regulator-name = "VINT_1.1V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vg3d_breg: BUCK3 {
+				regulator-name = "G3D_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-microvolt-offset = <50000>;
+				regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+
+			EN32KHZ_AP {
+				regulator-name = "EN32KHZ_AP";
+				regulator-always-on;
+			};
+
+			EN32KHZ_CP {
+				regulator-name = "EN32KHZ_CP";
+				regulator-always-on;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <950000>;
+			};
+
+			chargercv_reg: CHARGER_CV {
+				regulator-name = "CHARGER_CV";
+				regulator-min-microvolt = <4200000>;
+				regulator-max-microvolt = <4200000>;
+				regulator-always-on;
+			};
+
+			CHARGER_TOPOFF {
+				regulator-name = "CHARGER_TOPOFF";
+				regulator-min-microamp = <200000>;
+				regulator-max-microamp = <200000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_7 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+
+	magnetometer@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-state {
+		gpa0-0-pin {
+			samsung,pins = "gpa0-0";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-1-pin {
+			samsung,pins = "gpa0-1";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-2-pin {
+			samsung,pins = "gpa0-2";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-3-pin {
+			samsung,pins = "gpa0-3";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+	};
+};
+
+&pinctrl_1 {
+	mhl_int: mhl-int-pins {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c_mhl_bus: i2c-mhl-bus-pins {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb_sel: usb-sel-pins {
+		samsung,pins = "gpl0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_en: bt-en-pins {
+		samsung,pins = "gpl0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_res: bt-res-pins {
+		samsung,pins = "gpl1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	otg_gp: otg-gp-pins {
+		samsung,pins = "gpx3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	mag_mhl_gpio: mag-mhl-pins {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max8997_irq: max8997-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max17042_fuel_irq: max17042-fuel-irq-pins {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp224_irq: tsp224-irq-pins {
+		samsung,pins = "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_0 {
+	status = "okay";
+
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vemmc_reg>;
+
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
+	pinctrl-names = "default";
+};
+
+&sdhci_2 {
+	status = "okay";
+
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+
+		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_LOW>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-names = "host-wakeup";
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index e0abfc3324d1..f1927ca15e08 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4210 based Origen board device tree source
  *
@@ -8,93 +9,90 @@
  *
  * Device tree source file for Insignal's Origen board which is based on
  * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4210";
 	compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x10000000
 		       0x50000000 0x10000000
 		       0x60000000 0x10000000
 		       0x70000000 0x10000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
-		stdout-path = &serial_2;
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial2:115200n8";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
-			enable-active-high;
-		};
+	mmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		up {
+		key-up {
 			label = "Up";
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		down {
+		key-down {
 			label = "Down";
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
-			gpios = <&gpx1 7 1>;
+			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		home {
+		key-home {
 			label = "Home";
-			gpios = <&gpx1 6 1>;
+			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
-			gpios = <&gpx1 5 1>;
+			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	leds {
 		compatible = "gpio-leds";
-		status {
-			gpios = <&gpx1 3 1>;
+		led-status {
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
 			linux,default-trigger = "heartbeat";
 		};
 	};
@@ -109,6 +107,13 @@
 			compatible = "samsung,clock-xusbxti";
 			clock-frequency = <24000000>;
 		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on max8997 PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	display-timings {
@@ -127,13 +132,42 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck1_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
 &fimd {
 	pinctrl-0 = <&lcd_en &lcd_clk &lcd_data24 &pwm0_out>;
 	pinctrl-names = "default";
 	status = "okay";
 };
 
-&g2d {
+&gpu {
+	mali-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo3_reg>;
+	vusb_a-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
 	status = "okay";
 };
 
@@ -144,11 +178,13 @@
 	pinctrl-0 = <&i2c0_bus>;
 	pinctrl-names = "default";
 
-	max8997_pmic@66 {
+	pmic@66 {
 		compatible = "maxim,max8997-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx0>;
-		interrupts = <4 0>, <3 0>;
+		interrupts = <4 IRQ_TYPE_NONE>, <3 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max8997_irq>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>;
 		max8997,pmic-buck2-dvs-voltage = <1100000>;
@@ -177,79 +213,74 @@
 			ldo4_reg: LDO4 {
 				regulator-name = "VDD_RTC_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
 			ldo6_reg: LDO6 {
 				regulator-name = "VMIPI_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
 			ldo7_reg: LDO7 {
 				regulator-name = "VDD_AUD_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
 			ldo8_reg: LDO8 {
 				regulator-name = "VADC_3.3V";
 				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt	= <3300000>;
+				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo9_reg: LDO9 {
 				regulator-name = "DVDD_SWB_2.8V";
 				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt	= <2800000>;
+				regulator-max-microvolt = <2800000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: LDO10 {
 				regulator-name = "VDD_PLL_1.1V";
 				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt	= <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 			};
 
 			ldo11_reg: LDO11 {
 				regulator-name = "VDD_AUD_3V";
 				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt	= <3000000>;
+				regulator-max-microvolt = <3000000>;
 			};
 
 			ldo14_reg: LDO14 {
 				regulator-name = "AVDD18_SWB_1.8V";
 				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt	= <1800000>;
+				regulator-max-microvolt = <1800000>;
 				regulator-always-on;
 			};
 
 			ldo17_reg: LDO17 {
 				regulator-name = "VDD_SWB_3.3V";
 				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt	= <3300000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
 			ldo21_reg: LDO21 {
 				regulator-name = "VDD_MIF_1.2V";
 				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt	= <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 			};
 
 			buck1_reg: BUCK1 {
-				/*
-				* HACK: The real name is VDD_ARM_1.2V,
-				* but exynos-cpufreq does not support
-				* DT-based regulator lookup yet.
-				*/
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM_1.2V";
 				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt	= <1350000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
@@ -257,7 +288,7 @@
 			buck2_reg: BUCK2 {
 				regulator-name = "VDD_INT_1.1V";
 				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt	= <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
@@ -282,14 +313,20 @@
 				regulator-boot-on;
 				regulator-always-on;
 			};
+
+			EN32KHZ_AP {
+				regulator-name = "EN32KHZ_AP";
+				regulator-always-on;
+			};
 		};
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
+&pinctrl_1 {
+	max8997_irq: max8997-irq-pins {
+		samsung,pins = "gpx0-3", "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };
 
 &sdhci_0 {
@@ -326,12 +363,10 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &tmu {
 	status = "okay";
 };
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index a7c212891674..76f44ae0de46 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source
  *
@@ -8,840 +9,855 @@
  *
  * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device
  * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_0 {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe3: gpe3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
+	gpe4: gpe4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_a: uart-audio-a-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
 
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_b: uart-audio-b-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ctrl: lcd-ctrl-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_sync: lcd-sync-pins {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_en: lcd-en-pins {
+		samsung,pins = "gpe3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_clk: lcd-clk-pins {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data16: lcd-data-width16-pins {
+		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data18: lcd-data-width18-pins {
+		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+				"gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data24: lcd-data-width24-pins {
+		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl1: gpl1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl2: gpl2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd-pins {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_clk: sd4-clk-pins {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cmd: sd4-cmd-pins {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cd: sd4-cd-pins {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus1: sd4-bus-width1-pins {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus4: sd4-bus-width4-pins {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus8: sd4-bus-width8-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd-pins {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8-pins {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk-pins {
+		samsung,pins = "gpk3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd-pins {
+		samsung,pins = "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd-pins {
+		samsung,pins = "gpk3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1-pins {
+		samsung,pins = "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4-pins {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	eint0: ext-int0-pins {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint8: ext-int8-pins {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint15: ext-int15-pins {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint16: ext-int16-pins {
+		samsung,pins = "gpx2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint31: ext-int31-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_io: cam-port-a-io-pins {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec-pins {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpz: gpz-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe2: gpe2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe3: gpe3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe4: gpe4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-6", "gpb-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_sync: lcd-sync {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_en: lcd-en {
-			samsung,pins = "gpe3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@11000000 {
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <4>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+	pcm0_bus: pcm0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 043b03caff8f..b566f878ed84 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4210 based SMDKV310 board device tree source
  *
@@ -8,26 +9,29 @@
  *
  * Device tree source file for Samsung's SMDKV310 board which is based on
  * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung smdkv310 evaluation board based on Exynos4210";
 	compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-		stdout-path = &serial_1;
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial1:115200n8";
 	};
 
 	fixed-rate-clocks {
@@ -40,11 +44,27 @@
 			compatible = "samsung,clock-xusbxti";
 			clock-frequency = <24000000>;
 		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
-&g2d {
-	status = "okay";
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
+	};
 };
 
 &i2c_0 {
@@ -69,95 +89,94 @@
 	samsung,keypad-num-rows = <2>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-names = "default";
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	status = "okay";
 
-	key_1 {
+	key-1 {
 		keypad,row = <0>;
 		keypad,column = <3>;
 		linux,code = <2>;
 	};
 
-	key_2 {
+	key-2 {
 		keypad,row = <0>;
 		keypad,column = <4>;
 		linux,code = <3>;
 	};
 
-	key_3 {
+	key-3 {
 		keypad,row = <0>;
 		keypad,column = <5>;
 		linux,code = <4>;
 	};
 
-	key_4 {
+	key-4 {
 		keypad,row = <0>;
 		keypad,column = <6>;
 		linux,code = <5>;
 	};
 
-	key_5 {
+	key-5 {
 		keypad,row = <0>;
 		keypad,column = <7>;
 		linux,code = <6>;
 	};
 
-	key_a {
+	key-a {
 		keypad,row = <1>;
 		keypad,column = <3>;
 		linux,code = <30>;
 	};
 
-	key_b {
+	key-b {
 		keypad,row = <1>;
 		keypad,column = <4>;
 		linux,code = <48>;
 	};
 
-	key_c {
+	key-c {
 		keypad,row = <1>;
 		keypad,column = <5>;
 		linux,code = <46>;
 	};
 
-	key_d {
+	key-d {
 		keypad,row = <1>;
 		keypad,column = <6>;
 		linux,code = <32>;
 	};
 
-	key_e {
+	key-e {
 		keypad,row = <1>;
 		keypad,column = <7>;
 		linux,code = <18>;
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
+&rtc {
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sdhci_2 {
 	bus-width = <4>;
 	pinctrl-names = "default";
@@ -182,13 +201,13 @@
 };
 
 &spi_2 {
-	cs-gpios = <&gpc1 2 0>;
+	cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	w25x80@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 98f3ce65cb9a..ff6ee4b2c31b 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4210 based Trats board device tree source
  *
@@ -6,122 +7,128 @@
  *
  * Device tree source file for Samsung's Trats board which is based on
  * Samsung's Exynos4210 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Trats based on Exynos4210";
 	compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
+	chassis-type = "handset";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000
 			0x60000000 0x10000000
 			0x70000000 0x10000000>;
 	};
 
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = &serial_2;
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
 	};
 
-	regulators {
-		compatible = "simple-bus";
+	chosen {
+		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+		stdout-path = "serial2:115200n8";
+	};
 
-		vemmc_reg: regulator-0 {
-			compatible = "regulator-fixed";
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk0 2 0>;
-			enable-active-high;
-		};
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		tsp_reg: regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "TSP_FIXED_VOLTAGES";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpl0 3 0>;
-			enable-active-high;
-		};
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		cam_af_28v_reg: regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_AF_2.8V_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpk1 1 0>;
-			enable-active-high;
-		};
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		cam_io_en_reg: regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_IO_EN";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpe2 1 0>;
-			enable-active-high;
-		};
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		cam_io_12v_reg: regulator-4 {
-			compatible = "regulator-fixed";
-			regulator-name = "8M_1.2V_EN";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			gpio = <&gpe2 5 0>;
-			enable-active-high;
-		};
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		vt_core_15v_reg: regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "VT_CORE_1.5V";
-			regulator-min-microvolt = <1500000>;
-			regulator-max-microvolt = <1500000>;
-			gpio = <&gpe2 2 0>;
-			enable-active-high;
-		};
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
 		vol-down-key {
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <10>;
 		};
 
 		vol-up-key {
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <10>;
 		};
 
 		power-key {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <352>;
 			label = "ok";
 			debounce-interval = <10>;
 		};
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -132,58 +139,35 @@
 			compatible = "samsung,clock-xusbxti";
 			clock-frequency = <24000000>;
 		};
-	};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 2 2>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 4 4>;
-			       };
-		       };
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on max8997 PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
 		};
 	};
+};
 
-	camera {
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-		status = "okay";
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-					<&clock CLK_SCLK_FIMC0>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
+&camera {
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+	status = "okay";
+};
 
-		fimc_1: fimc@11810000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-					<&clock CLK_SCLK_FIMC1>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
 
-		fimc_2: fimc@11820000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-					<&clock CLK_SCLK_FIMC2>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 2 2>, <&cpu1 2 2>;
 		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-					<&clock CLK_SCLK_FIMC3>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 4 4>, <&cpu1 4 4>;
 		};
 	};
 };
@@ -191,31 +175,18 @@
 &dsi_0 {
 	vddcore-supply = <&vusb_reg>;
 	vddio-supply = <&vmipi_reg>;
+	samsung,burst-clock-frequency = <500000000>;
+	samsung,esc-clock-frequency = <20000000>;
 	samsung,pll-clock-frequency = <24000000>;
 	status = "okay";
 
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				remote-endpoint = <&dsi_in>;
-				samsung,burst-clock-frequency = <500000000>;
-				samsung,esc-clock-frequency = <20000000>;
-			};
-		};
-	};
-
 	panel@0 {
 		reg = <0>;
 		compatible = "samsung,s6e8aa0";
 		vdd3-supply = <&vcclcd_reg>;
 		vci-supply = <&vlcd_reg>;
-		reset-gpios = <&gpy4 5 0>;
-		power-on-delay= <50>;
+		reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+		power-on-delay = <50>;
 		reset-delay = <100>;
 		init-delay = <100>;
 		flip-horizontal;
@@ -236,23 +207,54 @@
 				vsync-len = <2>;
 			};
 		};
-
-		port {
-			dsi_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
 	};
 };
 
 &exynos_usbphy {
 	status = "okay";
+	vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			  <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			  <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			  <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+		assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			  <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
 };
 
 &fimd {
 	status = "okay";
 };
 
+&gpu {
+	status = "okay";
+};
+
 &hsotg {
 	vusb_d-supply = <&vusb_reg>;
 	vusb_a-supply = <&vusbdac_reg>;
@@ -268,13 +270,13 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	mms114-touchscreen@48 {
+	touchscreen@48 {
 		compatible = "melfas,mms114";
 		reg = <0x48>;
 		interrupt-parent = <&gpx0>;
-		interrupts = <4 2>;
-		x-size = <720>;
-		y-size = <1280>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
 		avdd-supply = <&tsp_reg>;
 		vdd-supply = <&tsp_reg>;
 	};
@@ -288,10 +290,12 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	max8997_pmic@66 {
+	pmic@66 {
 		compatible = "maxim,max8997-pmic";
 
 		reg = <0x66>;
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
 
 		max8997,pmic-buck1-uses-gpio-dvs;
 		max8997,pmic-buck2-uses-gpio-dvs;
@@ -300,9 +304,9 @@
 		max8997,pmic-ignore-gpiodvs-side-effect;
 		max8997,pmic-buck125-default-dvs-idx = <0>;
 
-		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
-						 <&gpx0 6 0>,
-						 <&gpl0 0 0>;
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
 
 		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
 						 <1250000>, <1200000>,
@@ -321,140 +325,176 @@
 
 		regulators {
 			valive_reg: LDO2 {
-			     regulator-name = "VALIVE_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
+				regulator-name = "VALIVE_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
 			};
 
 			vusb_reg: LDO3 {
-			     regulator-name = "VUSB_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
+				regulator-name = "VUSB_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
 			};
 
 			vmipi_reg: LDO4 {
-			     regulator-name = "VMIPI_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
 			vpda_reg: LDO6 {
-			     regulator-name = "VCC_1.8V_PDA";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
-			     regulator-always-on;
+				regulator-name = "VCC_1.8V_PDA";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			vcam_reg: LDO7 {
-			     regulator-name = "CAM_ISP_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
+				regulator-name = "CAM_ISP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
 			vusbdac_reg: LDO8 {
-			     regulator-name = "VUSB/VDAC_3.3V_C210";
-			     regulator-min-microvolt = <3300000>;
-			     regulator-max-microvolt = <3300000>;
+				regulator-name = "VUSB+VDAC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 			};
 
 			vccpda_reg: LDO9 {
-			     regulator-name = "VCC_2.8V_PDA";
-			     regulator-min-microvolt = <2800000>;
-			     regulator-max-microvolt = <2800000>;
-			     regulator-always-on;
+				regulator-name = "VCC_2.8V_PDA";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
 			};
 
 			vpll_reg: LDO10 {
-			     regulator-name = "VPLL_1.1V_C210";
-			     regulator-min-microvolt = <1100000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
+				regulator-name = "VPLL_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
 			};
 
 			vtcam_reg: LDO12 {
-			     regulator-name = "VT_CAM_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
 			};
 
 			vcclcd_reg: LDO13 {
-			     regulator-name = "VCC_3.3V_LCD";
-			     regulator-min-microvolt = <3300000>;
-			     regulator-max-microvolt = <3300000>;
+				regulator-name = "VCC_3.3V_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
 			};
 
 			vlcd_reg: LDO15 {
-			     regulator-name = "VLCD_2.2V";
-			     regulator-min-microvolt = <2200000>;
-			     regulator-max-microvolt = <2200000>;
+				regulator-name = "VLCD_2.2V";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2200000>;
 			};
 
 			camsensor_reg: LDO16 {
-			     regulator-name = "CAM_SENSOR_IO_1.8V";
-			     regulator-min-microvolt = <1800000>;
-			     regulator-max-microvolt = <1800000>;
+				regulator-name = "CAM_SENSOR_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			tflash_reg: LDO17 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
 			};
 
 			vddq_reg: LDO21 {
-			     regulator-name = "VDDQ_M1M2_1.2V";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			     regulator-always-on;
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
 			};
 
 			varm_breg: BUCK1 {
-			     /*
-			      * HACK: The real name is VARM_1.2V_C210,
-			      * but exynos-cpufreq does not support
-			      * DT-based regulator lookup yet.
-			      */
-			     regulator-name = "vdd_arm";
-			     regulator-min-microvolt = <900000>;
-			     regulator-max-microvolt = <1350000>;
-			     regulator-always-on;
+				regulator-name = "VARM_1.2V_C210";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
 			};
 
 			vint_breg: BUCK2 {
-			     regulator-name = "VINT_1.1V_C210";
-			     regulator-min-microvolt = <900000>;
-			     regulator-max-microvolt = <1100000>;
-			     regulator-always-on;
+				regulator-name = "VINT_1.1V_C210";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
 			};
 
 			camisp_breg: BUCK4 {
-			     regulator-name = "CAM_ISP_CORE_1.2V";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
 			};
 
 			vmem_breg: BUCK5 {
-			     regulator-name = "VMEM_1.2V_C210";
-			     regulator-min-microvolt = <1200000>;
-			     regulator-max-microvolt = <1200000>;
-			     regulator-always-on;
+				regulator-name = "VMEM_1.2V_C210";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
 			};
 
 			vccsub_breg: BUCK7 {
-			     regulator-name = "VCC_SUB_2.0V";
-			     regulator-min-microvolt = <2000000>;
-			     regulator-max-microvolt = <2000000>;
-			     regulator-always-on;
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
 			};
 
 			safe1_sreg: ESAFEOUT1 {
-			     regulator-name = "SAFEOUT1";
-			     regulator-always-on;
+				regulator-name = "SAFEOUT1";
 			};
 
 			safe2_sreg: ESAFEOUT2 {
-			     regulator-name = "SAFEOUT2";
-			     regulator-boot-on;
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+
+			EN32KHZ_AP {
+				regulator-name = "EN32KHZ_AP";
+				regulator-always-on;
+			};
+
+			EN32KHZ_CP {
+				regulator-name = "EN32KHZ_CP";
+				regulator-always-on;
 			};
 		};
 	};
 };
 
+&pinctrl_1 {
+	bt_shutdown: bt-shutdown-pins {
+		samsung,pins = "gpl1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup-pins {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sdhci_0 {
 	bus-width = <8>;
 	non-removable;
@@ -464,8 +504,52 @@
 	status = "okay";
 };
 
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&tflash_reg>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&tflash_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &serial_1 {
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index d4f2b11319dd..8fe0d5d2be2d 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4210 based Universal C210 board device tree source
  *
@@ -6,47 +7,34 @@
  *
  * Device tree source file for Samsung's Universal C210 board which is based on
  * Samsung's Exynos4210 rev0 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos4210.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Samsung Universal C210 based on Exynos4210 rev0";
 	compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
+	chassis-type = "handset";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg =  <0x40000000 0x10000000
 			0x50000000 0x10000000>;
 	};
 
-	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
-		stdout-path = &serial_2;
+	aliases {
+		mmc0 = &sdhci_0;
+		mmc1 = &sdhci_2;
+		mmc2 = &sdhci_3;
 	};
 
-	sysram@02020000 {
-		smp-sysram@0 {
-			status = "disabled";
-		};
-
-		smp-sysram@5000 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x5000 0x1000>;
-		};
-
-		smp-sysram@1f000 {
-			status = "disabled";
-		};
+	chosen {
+		bootargs = "root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+		stdout-path = "serial2:115200n8";
 	};
 
-	mct@10050000 {
-		compatible = "none";
-	};
 
 	fixed-rate-clocks {
 		xxti {
@@ -58,119 +46,71 @@
 			compatible = "samsung,clock-xusbxti";
 			clock-frequency = <24000000>;
 		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 
 	vemmc_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "VMEM_VDD_2_8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe1 3 0>;
+		gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	hsotg@12480000 {
-		vusb_d-supply = <&ldo3_reg>;
-		vusb_a-supply = <&ldo8_reg>;
-		dr_mode = "peripheral";
-		status = "okay";
-	};
-
-	sdhci_emmc: sdhci@12510000 {
-		bus-width = <8>;
-		non-removable;
-		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
-		pinctrl-names = "default";
-		vmmc-supply = <&vemmc_reg>;
-		status = "okay";
-	};
-
-	sdhci_sd: sdhci@12530000 {
-		bus-width = <4>;
-		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-		pinctrl-names = "default";
-		vmmc-supply = <&ldo5_reg>;
-		cd-gpios = <&gpx3 4 0>;
-		cd-inverted;
-		status = "okay";
-	};
-
-	ehci@12580000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	ohci@12590000 {
-		status = "okay";
-		port@0 {
-			status = "okay";
-		};
-	};
-
-	exynos-usbphy@125B0000 {
-		status = "okay";
-	};
-
-	serial@13800000 {
-		status = "okay";
-	};
-
-	serial@13810000 {
-		status = "okay";
-	};
-
-	serial@13820000 {
-		status = "okay";
-	};
-
-	serial@13830000 {
-		status = "okay";
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
 		vol-up-key {
-			gpios = <&gpx2 0 1>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <115>;
 			label = "volume up";
 			debounce-interval = <1>;
 		};
 
 		vol-down-key {
-			gpios = <&gpx2 1 1>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <114>;
 			label = "volume down";
 			debounce-interval = <1>;
 		};
 
 		config-key {
-			gpios = <&gpx2 2 1>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <171>;
 			label = "config";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		camera-key {
-			gpios = <&gpx2 3 1>;
+			gpios = <&gpx2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <212>;
 			label = "camera";
 			debounce-interval = <1>;
 		};
 
 		power-key {
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <116>;
 			label = "power";
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		ok-key {
-			gpios = <&gpx3 5 1>;
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 			linux,code = <352>;
 			label = "ok";
 			debounce-interval = <1>;
@@ -178,245 +118,31 @@
 	};
 
 	tsp_reg: voltage-regulator {
-	        compatible = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "TSP_2_8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpe2 3 0>;
+		gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
-	i2c@13890000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c3_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		tsp@4a {
-			/* TBD: Atmel maXtouch touchscreen */
-			reg = <0x4a>;
-		};
-	};
-
-	i2c@138B0000 {
-		samsung,i2c-sda-delay = <100>;
-		samsung,i2c-slave-addr = <0x10>;
-		samsung,i2c-max-bus-freq = <100000>;
-		pinctrl-0 = <&i2c5_bus>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		vdd_arm_reg: pmic@60 {
-			compatible = "maxim,max8952";
-			reg = <0x60>;
-
-			max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>;
-			max8952,default-mode = <0>;
-			max8952,dvs-mode-microvolt = <1250000>, <1200000>,
-							<1050000>, <950000>;
-			max8952,sync-freq = <0>;
-			max8952,ramp-speed = <0>;
-
-			regulator-name = "vdd_arm";
-			regulator-min-microvolt = <770000>;
-			regulator-max-microvolt = <1400000>;
-			regulator-always-on;
-			regulator-boot-on;
-		};
-
-		pmic@66 {
-			compatible = "national,lp3974";
-			reg = <0x66>;
-
-			max8998,pmic-buck1-default-dvs-idx = <0>;
-			max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>,
-							<&gpx0 6 0>;
-			max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
-							<1100000>, <1000000>;
-
-			max8998,pmic-buck2-default-dvs-idx = <0>;
-			max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>;
-			max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
-
-			regulators {
-				ldo2_reg: LDO2 {
-					regulator-name = "VALIVE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ldo3_reg: LDO3 {
-					regulator-name = "VUSB+MIPI_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				ldo4_reg: LDO4 {
-					regulator-name = "VADC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo5_reg: LDO5 {
-					regulator-name = "VTF_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo6_reg: LDO6 {
-					regulator-name = "LDO6";
-					regulator-min-microvolt = <2000000>;
-					regulator-max-microvolt = <2000000>;
-				};
-
-				ldo7_reg: LDO7 {
-					regulator-name = "VLCD+VMIPI_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo8_reg: LDO8 {
-					regulator-name = "VUSB+VDAC_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo9_reg: LDO9 {
-					regulator-name = "VCC_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					regulator-always-on;
-				};
-
-				ldo10_reg: LDO10 {
-					regulator-name = "VPLL_1.1V";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				ldo11_reg: LDO11 {
-					regulator-name = "CAM_AF_3.3V";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				ldo12_reg: LDO12 {
-					regulator-name = "PS_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo13_reg: LDO13 {
-					regulator-name = "VHIC_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo14_reg: LDO14 {
-					regulator-name = "CAM_I_HOST_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo15_reg: LDO15 {
-					regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				ldo16_reg: LDO16 {
-					regulator-name = "CAM_S_ANA_2.8V";
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-				};
-
-				ldo17_reg: LDO17 {
-					regulator-name = "VCC_3.0V_LCD";
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-				};
-
-				buck1_reg: BUCK1 {
-					regulator-name = "VINT_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-					regulator-always-on;
-				};
-
-				buck2_reg: BUCK2 {
-					regulator-name = "VG3D_1.1V";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1500000>;
-					regulator-boot-on;
-				};
-
-				buck3_reg: BUCK3 {
-					regulator-name = "VCC_1.8V";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				buck4_reg: BUCK4 {
-					regulator-name = "VMEM_1.2V";
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					regulator-always-on;
-				};
-
-				ap32khz_reg: EN32KHz-AP {
-					regulator-name = "32KHz AP";
-					regulator-always-on;
-				};
-
-				cp32khz_reg: EN32KHz-CP {
-					regulator-name = "32KHz CP";
-				};
-
-				vichg_reg: ENVICHG {
-					regulator-name = "VICHG";
-				};
-
-				safeout1_reg: ESAFEOUT1 {
-					regulator-name = "SAFEOUT1";
-					regulator-always-on;
-				};
-
-				safeout2_reg: ESAFEOUT2 {
-					regulator-name = "SAFEOUT2";
-					regulator-boot-on;
-				};
-			};
-		};
-	};
-
-	spi-lcd {
+	spi-3 {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpy3 1 0>;
-		gpio-mosi = <&gpy3 3 0>;
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
 		num-chipselects = <1>;
-		cs-gpios = <&gpy4 3 0>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
 
 		lcd@0 {
 			compatible = "samsung,ld9040";
 			reg = <0>;
 			vdd3-supply = <&ldo7_reg>;
 			vci-supply = <&ldo17_reg>;
-			reset-gpios = <&gpy4 5 0>;
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
 			spi-max-frequency = <1200000>;
-			spi-cpol;
-			spi-cpha;
 			power-on-delay = <10>;
 			reset-delay = <10>;
 			panel-width-mm = <90>;
@@ -446,78 +172,19 @@
 		};
 	};
 
-	fimd: fimd@11c00000 {
-		pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
-		pinctrl-names = "default";
-		status = "okay";
-		samsung,invert-vden;
-		samsung,invert-vclk;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@3 {
-			reg = <3>;
-			fimd_dpi_ep: endpoint {
-				remote-endpoint = <&lcd_ep>;
-			};
-		};
-	};
-
-	pwm@139D0000 {
-		compatible = "samsung,s5p6440-pwm";
-		status = "okay";
-	};
-
-	camera {
-		status = "okay";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
-
-		fimc_0: fimc@11800000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-					<&clock CLK_SCLK_FIMC0>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_1: fimc@11810000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-					<&clock CLK_SCLK_FIMC1>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_2: fimc@11820000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-					<&clock CLK_SCLK_FIMC2>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-
-		fimc_3: fimc@11830000 {
-			status = "okay";
-			assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-					<&clock CLK_SCLK_FIMC3>;
-			assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
-			assigned-clock-rates = <0>, <160000000>;
-		};
-	};
-
 	hdmi_en: voltage-regulator-hdmi-5v {
 		compatible = "regulator-fixed";
 		regulator-name = "HDMI_5V";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpe0 1 0>;
+		gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};
 
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 0 &gpe4 3 0>;
+		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -526,44 +193,500 @@
 		pinctrl-names = "default";
 		status = "okay";
 	};
+};
 
-	mixer@12C10000 {
-		status = "okay";
+&camera {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&cpu0 {
+	cpu0-supply = <&vdd_arm_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz */
+			cooling-device = <&cpu0 2 2>;
+		};
+		map1 {
+			/* Corresponds to 200MHz */
+			cooling-device = <&cpu0 4 4>;
+		};
 	};
+};
 
-	hdmi@12D00000 {
-		hpd-gpio = <&gpx3 7 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&hdmi_hpd>;
-		hdmi-en-supply = <&hdmi_en>;
-		vdd-supply = <&ldo3_reg>;
-		vdd_osc-supply = <&ldo4_reg>;
-		vdd_pll-supply = <&ldo3_reg>;
-		ddc = <&hdmi_ddc>;
-		status = "okay";
+&ehci {
+	status = "okay";
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+	vbus-supply = <&safeout1_reg>;
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			  <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			  <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			  <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			  <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	status = "okay";
+	samsung,invert-vden;
+	samsung,invert-vclk;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	port@3 {
+		reg = <3>;
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
 	};
+};
 
-	i2c@138E0000 {
-		status = "okay";
+&gpu {
+	mali-supply = <&buck2_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	hdmi-en-supply = <&hdmi_en>;
+	vdd-supply = <&ldo3_reg>;
+	vdd_osc-supply = <&ldo4_reg>;
+	vdd_pll-supply = <&ldo3_reg>;
+	ddc = <&hdmi_ddc>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo3_reg>;
+	vusb_a-supply = <&ldo8_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tsp@4a {
+		/* TBD: Atmel maXtouch touchscreen */
+		reg = <0x4a>;
 	};
 };
 
+&i2c_5 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	vdd_arm_reg: pmic@60 {
+		compatible = "maxim,max8952";
+		reg = <0x60>;
+
+		max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>,
+				    <&gpx0 4 GPIO_ACTIVE_HIGH>;
+		max8952,default-mode = <0>;
+		max8952,dvs-mode-microvolt = <1250000>, <1200000>,
+						<1050000>, <950000>;
+		max8952,sync-freq = <0>;
+		max8952,ramp-speed = <0>;
+
+		regulator-name = "VARM_1.2V_C210";
+		regulator-min-microvolt = <770000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	pmic@66 {
+		compatible = "national,lp3974";
+		interrupts-extended = <&gpx0 7 0>, <&gpx2 7 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lp3974_irq>;
+		reg = <0x66>;
+
+		max8998,pmic-buck1-default-dvs-idx = <0>;
+		max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						<&gpx0 6 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>,
+						<1100000>, <1000000>;
+
+		max8998,pmic-buck2-default-dvs-idx = <0>;
+		max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>;
+		max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>;
+
+		regulators {
+			ldo2_reg: LDO2 {
+				regulator-name = "VALIVE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VUSB+MIPI_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "LDO6";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VLCD+VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VCC_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "CAM_AF_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "PS_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VHIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "CAM_I_HOST_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "CAM_S_DIG+FM33_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "CAM_S_ANA_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VINT_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VG3D_1.1V";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VCC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ap32khz_reg: EN32KHz-AP {
+				regulator-name = "32KHz AP";
+				regulator-always-on;
+			};
+
+			cp32khz_reg: EN32KHz-CP {
+				regulator-name = "32KHz CP";
+			};
+
+			vichg_reg: ENVICHG {
+				regulator-name = "VICHG";
+			};
+
+			safeout1_reg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safeout2_reg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&mct {
+	status = "disabled";
+};
+
+&mdma1 {
+	/* Use the secure mdma0 */
+	status = "disabled";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&ohci {
+	status = "okay";
+};
+
 &pinctrl_1 {
-	hdmi_hpd: hdmi-hpd {
+	bt_shutdown: bt-shutdown-pins {
+		samsung,pins = "gpe1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup-pins {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	lp3974_irq: lp3974-irq-pins {
+		samsung,pins = "gpx0-7", "gpx2-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
 &pinctrl_0 {
-	i2c_ddc_bus: i2c-ddc-bus {
+	i2c_ddc_bus: i2c-ddc-bus-pins {
 		samsung,pins = "gpe4-2", "gpe4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
-&mdma1 {
-	reg = <0x12840000 0x1000>;
+&pwm {
+	compatible = "samsung,s5p6440-pwm";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_0 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+	pinctrl-names = "default";
+	vmmc-supply = <&vemmc_reg>;
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo5_reg>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&ldo5_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpe1 4 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_2 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&serial_3 {
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&soc {
+	mdma0: dma-controller@12840000 {
+		compatible = "arm,pl330", "arm,primecell";
+		reg = <0x12840000 0x1000>;
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clock CLK_MDMA>;
+		clock-names = "apb_pclk";
+		#dma-cells = <1>;
+		power-domains = <&pd_lcd0>;
+	};
+};
+
+&sysram {
+	smp-sram@0 {
+		status = "disabled";
+	};
+
+	smp-sram@5000 {
+		compatible = "samsung,exynos4210-sysram";
+		reg = <0x5000 0x1000>;
+	};
+
+	smp-sram@1f000 {
+		status = "disabled";
+	};
 };
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 10d3c173396e..0e27c3375e2e 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4210 SoC device tree source
  *
@@ -7,20 +8,15 @@
  *		www.linaro.org
  *
  * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
- * based board files can include this file and provide values for board specfic
+ * based board files can include this file and provide values for board specific
  * bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
  * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
  * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 #include "exynos4.dtsi"
-#include "exynos4210-pinctrl.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 
 / {
@@ -32,231 +28,481 @@
 		pinctrl2 = &pinctrl_2;
 	};
 
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+		};
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+
+		bus_dmc_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+				opp-microvolt = <1025000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-microvolt = <1050000>;
+			};
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+				opp-microvolt = <1150000>;
+				opp-suspend;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-10000000 {
+				opp-hz = /bits/ 64 <10000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_lcd0: bus-lcd0 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK200>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-5000000 {
+				opp-hz = /bits/ 64 <5000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@900 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x900>;
-			cooling-min-level = <4>;
-			cooling-max-level = <2>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
-		cpu@901 {
+		cpu1: cpu@901 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
 			reg = <0x901>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			clock-latency = <160000>;
+
+			operating-points = <
+				1200000 1250000
+				1000000 1150000
+				800000	1075000
+				500000	975000
+				400000	975000
+				200000	950000
+			>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
-	sysram: sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x20000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x20000>;
+	bus_leftbus_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
 		};
-
-		smp-sysram@1f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x1f000 0x1000>;
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-suspend;
 		};
 	};
 
-	pd_lcd1: lcd1-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-		#power-domain-cells = <0>;
-	};
+	soc: soc {
+		sysram: sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x20000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
 
-	l2c: l2-cache-controller@10502000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x10502000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-		arm,tag-latency = <2 2 1>;
-		arm,data-latency = <2 2 1>;
-	};
+			smp-sram@1f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x1f000 0x1000>;
+			};
+		};
 
-	mct: mct@10050000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &gic 0 69 0>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 0 42 0>,
-					<5 &gic 0 48 0>;
+		pd_lcd1: power-domain@10023ca0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023ca0 0x20>;
+			#power-domain-cells = <0>;
+			label = "LCD1";
 		};
-	};
 
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4210-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
+		l2c: cache-controller@10502000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10502000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,tag-latency = <2 2 1>;
+			arm,data-latency = <2 2 1>;
+		};
 
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 47 0>;
-	};
+		mct: timer@10050000 {
+			compatible = "samsung,exynos4210-mct";
+			reg = <0x10050000 0x800>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+					      <&combiner 12 6>,
+					      <&combiner 12 7>,
+					      <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	pinctrl_1: pinctrl@11000000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x11000000 0x1000>;
-		interrupts = <0 46 0>;
+		watchdog: watchdog@10060000 {
+			compatible = "samsung,s3c6410-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+		};
 
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+		clock: clock-controller@10030000 {
+			compatible = "samsung,exynos4210-clock";
+			reg = <0x10030000 0x20000>;
+			#clock-cells = <1>;
 		};
-	};
 
-	pinctrl_2: pinctrl@03860000 {
-		compatible = "samsung,exynos4210-pinctrl";
-		reg = <0x03860000 0x1000>;
-	};
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos4210-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	tmu: tmu@100C0000 {
-		compatible = "samsung,exynos4210-tmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x100C0000 0x100>;
-		interrupts = <2 4>;
-		clocks = <&clock CLK_TMU_APBIF>;
-		clock-names = "tmu_apbif";
-		samsung,tmu_gain = <15>;
-		samsung,tmu_reference_voltage = <7>;
-		status = "disabled";
-	};
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos4210-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
-
-			trips {
-			      cpu_alert0: cpu-alert-0 {
-				      temperature = <85000>; /* millicelsius */
-			      };
-			      cpu_alert1: cpu-alert-1 {
-				      temperature = <100000>; /* millicelsius */
-			      };
-			      cpu_alert2: cpu-alert-2 {
-				      temperature = <110000>; /* millicelsius */
-			      };
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
-	};
 
-	g2d: g2d@12800000 {
-		compatible = "samsung,s5pv210-g2d";
-		reg = <0x12800000 0x1000>;
-		interrupts = <0 89 0>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		iommus = <&sysmmu_g2d>;
-		status = "disabled";
-	};
+		pinctrl_2: pinctrl@3860000 {
+			compatible = "samsung,exynos4210-pinctrl";
+			reg = <0x03860000 0x1000>;
+		};
 
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+		g2d: g2d@12800000 {
+			compatible = "samsung,s5pv210-g2d";
+			reg = <0x12800000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+			power-domains = <&pd_lcd0>;
+			iommus = <&sysmmu_g2d>;
+		};
 
-		fimc_0: fimc@11800000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
+		ppmu_acp: ppmu@10ae0000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10ae0000 0x2000>;
+			status = "disabled";
 		};
 
-		fimc_1: fimc@11810000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,cam-if;
+		ppmu_lcd1: ppmu@12240000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x12240000 0x2000>;
+			clocks = <&clock CLK_PPMULCD1>;
+			clock-names = "ppmu";
+			status = "disabled";
 		};
 
-		fimc_2: fimc@11820000 {
-			samsung,pix-limits = <4224 8192 1920 4224>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
+		sysmmu_g2d: sysmmu@12a20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12a20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 7>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			power-domains = <&pd_lcd0>;
+			#iommu-cells = <0>;
 		};
 
-		fimc_3: fimc@11830000 {
-			samsung,pix-limits = <1920 8192 1366 1920>;
-			samsung,rotators = <0>;
-			samsung,mainscaler-ext;
-			samsung,lcd-wb;
+		sysmmu_fimd1: sysmmu@12220000 {
+			compatible = "samsung,exynos-sysmmu";
+			interrupt-parent = <&combiner>;
+			reg = <0x12220000 0x1000>;
+			interrupts = <5 3>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+			power-domains = <&pd_lcd1>;
+			#iommu-cells = <0>;
 		};
 	};
+};
 
-	mixer: mixer@12C10000 {
-		clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
-			"sclk_mixer";
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			<&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
-			<&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
-	};
+&cpu_alert0 {
+	temperature = <85000>; /* millicelsius */
+};
 
-	ppmu_lcd1: ppmu_lcd1@12240000 {
-		compatible = "samsung,exynos-ppmu";
-		reg = <0x12240000 0x2000>;
-		clocks = <&clock CLK_PPMULCD1>;
-		clock-names = "ppmu";
-		status = "disabled";
-	};
+&cpu_alert1 {
+	temperature = <100000>; /* millicelsius */
+};
 
-	sysmmu_g2d: sysmmu@12A20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12A20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 7>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		power-domains = <&pd_lcd0>;
-		#iommu-cells = <0>;
-	};
+&cpu_alert2 {
+	temperature = <110000>; /* millicelsius */
+};
 
-	sysmmu_fimd1: sysmmu@12220000 {
-		compatible = "samsung,exynos-sysmmu";
-		interrupt-parent = <&combiner>;
-		reg = <0x12220000 0x1000>;
-		interrupts = <5 3>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-		power-domains = <&pd_lcd1>;
-		#iommu-cells = <0>;
-	};
+&cpu_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
 };
 
 &gic {
 	cpu-offset = <0x8000>;
 };
 
+&camera {
+	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+};
+
 &combiner {
 	samsung,combiner-nr = <16>;
-	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&fimc_0 {
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,cam-if;
+};
+
+&fimc_1 {
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,cam-if;
+};
+
+&fimc_2 {
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,lcd-wb;
+};
+
+&fimc_3 {
+	samsung,pix-limits = <1920 8192 1366 1920>;
+	samsung,rotators = <0>;
+	samsung,mainscaler-ext;
+	samsung,lcd-wb;
+};
+
+&gpu {
+	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "gp",
+			  "gpmmu",
+			  "pp0",
+			  "ppmmu0",
+			  "pp1",
+			  "ppmmu1",
+			  "pp2",
+			  "ppmmu2",
+			  "pp3",
+			  "ppmmu3";
+	operating-points-v2 = <&gpu_opp_table>;
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+};
+
+&mdma1 {
+	power-domains = <&pd_lcd0>;
+};
+
+&mixer {
+	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp", "mout_mixer",
+		      "sclk_mixer";
+	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>,
+		 <&clock CLK_MOUT_MIXER>, <&clock CLK_SCLK_MIXER>;
+};
+
+&pmu {
+	interrupts = <2 2>, <3 2>;
+	interrupt-affinity = <&cpu0>, <&cpu1>;
+	status = "okay";
 };
 
 &pmu_system_controller {
@@ -267,3 +513,19 @@
 		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
 	#clock-cells = <1>;
 };
+
+&rotator {
+	power-domains = <&pd_lcd0>;
+};
+
+&sysmmu_rotator {
+	power-domains = <&pd_lcd0>;
+};
+
+&tmu {
+	compatible = "samsung,exynos4210-tmu";
+	clocks = <&clock CLK_TMU_APBIF>;
+	clock-names = "tmu_apbif";
+};
+
+#include "exynos4210-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi
deleted file mode 100644
index d9c8efeef208..000000000000
--- a/arch/arm/boot/dts/exynos4212.dtsi
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * Samsung's Exynos4212 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4212 SoC device nodes are listed in this file. Exynos4212
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4212 SoC. As device tree coverage for Exynos4212 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4x12.dtsi"
-
-/ {
-	compatible = "samsung,exynos4212", "samsung,exynos4";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@A00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
-			cooling-min-level = <13>;
-			cooling-max-level = <7>;
-			#cooling-cells = <2>; /* min followed by max */
-		};
-
-		cpu@A01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
-		};
-	};
-};
-
-&combiner {
-	samsung,combiner-nr = <18>;
-};
-
-&gic {
-	cpu-offset = <0x8000>;
-};
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
new file mode 100644
index 000000000000..94122e9c6625
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based Galaxy S3 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "exynos4412-midas.dtsi"
+
+/ {
+	aliases {
+		i2c9 = &i2c_ak8975;
+		i2c10 = &i2c_cm36651;
+	};
+
+	led-controller {
+		compatible = "skyworks,aat1290";
+		flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+		enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default", "host", "isp";
+		pinctrl-0 = <&camera_flash_host>;
+		pinctrl-1 = <&camera_flash_host>;
+		pinctrl-2 = <&camera_flash_isp>;
+
+		led {
+			function = LED_FUNCTION_FLASH;
+			color = <LED_COLOR_ID_WHITE>;
+			led-max-microamp = <520833>;
+			flash-max-microamp = <1012500>;
+			flash-max-timeout-us = <1940000>;
+		};
+	};
+
+	lcd_vdd3_reg: voltage-regulator-10 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_VDD_2.2V";
+		regulator-min-microvolt = <2200000>;
+		regulator-max-microvolt = <2200000>;
+		gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	ps_als_reg: voltage-regulator-11 {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_A_3.0V";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	i2c_ak8975: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+			gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	i2c_cm36651: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		light-sensor@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+			vled-supply = <&ps_als_reg>;
+		};
+	};
+};
+
+&buck9_reg {
+	maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
+};
+
+&cam_af_reg {
+	gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cam_io_reg {
+	gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&dsi_0 {
+	status = "okay";
+
+	panel@0 {
+		compatible = "samsung,s6e8aa0";
+		reg = <0>;
+		vdd3-supply = <&lcd_vdd3_reg>;
+		vci-supply = <&ldo25_reg>;
+		reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
+		power-on-delay = <50>;
+		reset-delay = <100>;
+		init-delay = <100>;
+		flip-horizontal;
+		flip-vertical;
+		panel-width-mm = <58>;
+		panel-height-mm = <103>;
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <57153600>;
+				hactive = <720>;
+				vactive = <1280>;
+				hfront-porch = <5>;
+				hback-porch = <5>;
+				hsync-len = <5>;
+				vfront-porch = <13>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+	};
+};
+
+&i2c_3 {
+	touchscreen@48 {
+		compatible = "melfas,mms114";
+		reg = <0x48>;
+		interrupt-parent = <&gpm2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&ldo23_reg>;
+		vdd-supply = <&ldo24_reg>;
+	};
+};
+
+&ldo25_reg {
+	regulator-name = "LCD_VCC_3.3V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&pinctrl_0 {
+	camera_flash_host: camera-flash-host-pins {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-val = <0>;
+	};
+
+	camera_flash_isp: camera-flash-isp-pins {
+		samsung,pins = "gpj1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-val = <1>;
+	};
+};
+
+&s5c73m3 {
+	standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
+	vdda-supply = <&ldo17_reg>;
+	status = "okay";
+};
+
+&sound {
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+
+		"SPK", "SPKOUTLN",
+		"SPK", "SPKOUTLP",
+		"SPK", "SPKOUTRN",
+		"SPK", "SPKOUTRP",
+
+		"RCV", "HPOUT2N",
+		"RCV", "HPOUT2P",
+
+		"HDMI", "LINEOUT1N",
+		"HDMI", "LINEOUT1P",
+
+		"LINE", "LINEOUT2N",
+		"LINE", "LINEOUT2P",
+
+		"IN1LP", "MICBIAS1",
+		"IN1LN", "MICBIAS1",
+		"Main Mic", "MICBIAS1",
+
+		"IN1RP", "Sub Mic",
+		"IN1RN", "Sub Mic",
+
+		"IN2LP:VXRN", "MICBIAS2",
+		"Headset Mic", "MICBIAS2",
+
+		"IN2RN", "FM In",
+		"IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+	gpio = <&gpf2 0 GPIO_ACTIVE_HIGH>;
+	enable-active-high;
+};
+
+&touchkey_reg {
+	gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-i9300.dts b/arch/arm/boot/dts/exynos4412-i9300.dts
new file mode 100644
index 000000000000..61aca5798f38
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-i9300.dts
@@ -0,0 +1,27 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based M0 (GT-I9300) board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4412-galaxy-s3.dtsi"
+
+/ {
+	model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412";
+	compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "handset";
+
+	/* bootargs are passed in by bootloader */
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+};
+
+&sound {
+	fm-sel-gpios = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+};
diff --git a/arch/arm/boot/dts/exynos4412-i9305.dts b/arch/arm/boot/dts/exynos4412-i9305.dts
new file mode 100644
index 000000000000..77083f1a8273
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-i9305.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "exynos4412-galaxy-s3.dtsi"
+
+/ {
+	model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412";
+	compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "handset";
+
+	/* bootargs are passed in by bootloader */
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+};
+
+&i2c0_bus {
+	/* SCL and SDA pins are swapped */
+	samsung,pins = "gpd1-1", "gpd1-0";
+};
diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts
new file mode 100644
index 000000000000..ded232b04e0d
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 core board
+ * which is based on Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos4412-itop-scp-core.dtsi"
+
+/ {
+	model = "TOPEET iTop 4412 Elite board based on Exynos4412";
+	compatible = "topeet,itop4412-elite", "samsung,exynos4412", "samsung,exynos4";
+
+	aliases {
+		mmc1 = &sdhci_2;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rw rootfstype=ext4 rootdelay=1 rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpx1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led3 {
+			label = "red:user";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-home {
+			label = "GPIO Key Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpx1 1 GPIO_ACTIVE_LOW>;
+		};
+
+		key-back {
+			label = "GPIO Key Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		key-sleep {
+			label = "GPIO Key Sleep";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+		};
+
+		key-vol-up {
+			label = "GPIO Key Vol+";
+			linux,code = <KEY_UP>;
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		key-vol-down {
+			label = "GPIO Key Vol-";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "wm-sound";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Line", "Line In",
+			"Line", "Line Out",
+			"Speaker", "Speaker",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Speaker", "SPK_LP",
+			"Speaker", "SPK_LN",
+			"Speaker", "SPK_RP",
+			"Speaker", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT3", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"RINPUT2", "Mic Jack";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&codec>;
+			clocks = <&i2s0 CLK_I2S_CDCLK>;
+			system-clock-frequency = <11289600>;
+		};
+	};
+
+	beep {
+		compatible = "pwm-beeper";
+		pwms = <&pwm 0 4000000 PWM_POLARITY_INVERTED>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_clk_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-rates = <0>, <0>, <112896000>, <11289600>;
+};
+
+&ehci {
+	status = "okay";
+	/* In order to reset USB ethernet */
+	samsung,vbus-gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+
+	phys = <&exynos_usbphy 1>, <&exynos_usbphy 3>;
+	phy-names = "host", "hsic1";
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&hsotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		wlf,shared-lrclk;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pinctrl_1 {
+	ether-reset-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	status = "okay";
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+	pinctrl-names = "default";
+	cd-gpios = <&gpx0 7 GPIO_ACTIVE_LOW>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo23_reg>;
+	vqmmc-supply = <&ldo17_reg>;
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
new file mode 100644
index 000000000000..7bc6968af9c3
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-itop-scp-core.dtsi
@@ -0,0 +1,509 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * TOPEET's Exynos4412 based itop board device tree source
+ *
+ * Copyright (c) 2016 SUMOMO Computer Association
+ *			https://www.sumomo.mobi
+ *			Randy Li <ayaka@soulik.info>
+ *
+ * Device tree source file for TOPEET iTop Exynos 4412 SCP package core
+ * board which is based on Samsung's Exynos4412 SoC.
+ */
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	aliases {
+		mmc0 = &mshc_0;
+	};
+
+	firmware@203f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0203f000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+				     /* Corresponds to 800MHz at freq_table */
+				     cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+						      <&cpu2 7 7>, <&cpu3 7 7>;
+				};
+				map1 {
+				     /* Corresponds to 200MHz at freq_table */
+				     cooling-device = <&cpu0 13 13>,
+						      <&cpu1 13 13>,
+						      <&cpu2 13 13>,
+						      <&cpu3 13 13>;
+			       };
+		       };
+		};
+	};
+
+	usb-hub {
+		compatible = "smsc,usb3503a";
+		reset-gpios = <&gpm2 4 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpm3 3 GPIO_ACTIVE_HIGH>;
+		intn-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hsic_reset>;
+	};
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+};
+
+&i2c_1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c1_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5m8767: pmic@66 {
+		compatible = "samsung,s5m8767-pmic";
+		reg = <0x66>;
+
+		s5m8767,pmic-buck-default-dvs-idx = <3>;
+
+		s5m8767,pmic-buck-dvs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>,
+						 <&gpb 6 GPIO_ACTIVE_HIGH>,
+						 <&gpb 7 GPIO_ACTIVE_HIGH>;
+
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
+
+		/* VDD_ARM */
+		s5m8767,pmic-buck2-dvs-voltage = <1356250>, <1300000>,
+						 <1243750>, <1118750>,
+						 <1068750>, <1012500>,
+						 <956250>, <900000>;
+		/* VDD_INT */
+		s5m8767,pmic-buck3-dvs-voltage = <1000000>, <1000000>,
+						 <925000>, <925000>,
+						 <887500>, <887500>,
+						 <850000>, <850000>;
+		/* VDD_G3D */
+		s5m8767,pmic-buck4-dvs-voltage = <1081250>, <1081250>,
+						 <1025000>, <950000>,
+						 <918750>, <900000>,
+						 <875000>, <831250>;
+		wakeup-source;
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* SCP uses 1.5v, POP uses 1.2v */
+			ldo2_reg: LDO2 {
+				regulator-name = "VDDQ_M12";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDDIOAP_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_LDO5";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD10_MPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD10_XPLL";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD10_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD33_LCD";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDD18_MIPI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD18_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD33_UOTG";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDDIOPERI_18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD18_ABB02";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD10_USH";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD18_HSIC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDDIOAP_MMC012_28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			/* Used by HSIC */
+			ldo18_reg: LDO18 {
+				regulator-name = "VDDIOPERI_28";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_LDO19";
+				op_mode = <0>; /* Always off Mode */
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD28_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD28_AF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDDA28_2M";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD28_TF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD33_A31";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD18_CAM";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD18_A31";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "GPS_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "DVDD12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1456250>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <875000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_m12";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd12_5m";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "pvdd_buck7";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "pvdd_buck8";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				op_mode = <1>; /* Normal Mode */
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vddf28_emmc";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3000000>;
+				op_mode = <1>; /* Normal Mode */
+			};
+		};
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap",
+					"s5m8767_cp", "s5m8767_bt";
+		};
+
+	};
+};
+
+&mfc {
+	status = "okay";
+};
+
+&mshc_0 {
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+	vmmc-supply = <&buck9_reg>;
+	broken-cd;
+	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pinctrl_1 {
+	hsic_reset: hsic-reset-pins {
+		samsung,pins = "gpm2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu {
+	vtmu-supply = <&ldo16_reg>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
new file mode 100644
index 000000000000..e6b949c1a00f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -0,0 +1,1459 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based Trats 2 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats 2 board which is based on
+ * Samsung's Exynos4412 SoC.
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include "exynos-pinctrl.h"
+
+/ {
+	compatible = "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+
+	aliases {
+		i2c11 = &i2c_max77693;
+		i2c12 = &i2c_max77693_fuel;
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	firmware@204f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204f000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	cam_io_reg: voltage-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_SENSOR_A";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	cam_af_reg: voltage-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_AF";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	vsil12: voltage-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VSIL_1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&buck7_reg>;
+	};
+
+	vcc33mhl: voltage-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3.3_MHL";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vcc18mhl: voltage-regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1.8_MHL";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	touchkey_reg: voltage-regulator-6 {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VDD_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	vbatt_reg: voltage-regulator-7 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBATT";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	mic_bias_reg: voltage-regulator-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpf1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	submic_bias_reg: voltage-regulator-9 {
+		compatible = "regulator-fixed";
+		regulator-name = "SUB_MICBIAS_LDO_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-down {
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+			linux,code = <114>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-up {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <115>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <116>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		key-ok {
+			gpios = <&gpx0 1 GPIO_ACTIVE_LOW>;
+			linux,code = <139>;
+			label = "ok";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	i2c_max77693: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmic@66 {
+			compatible = "maxim,max77693";
+			interrupt-parent = <&gpx1>;
+			interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_irq>;
+			reg = <0x66>;
+
+			regulators {
+				esafeout1_reg: ESAFEOUT1 {
+					regulator-name = "ESAFEOUT1";
+				};
+				esafeout2_reg: ESAFEOUT2 {
+					regulator-name = "ESAFEOUT2";
+				};
+				charger_reg: CHARGER {
+					regulator-name = "CHARGER";
+					regulator-min-microamp = <60000>;
+					regulator-max-microamp = <2580000>;
+				};
+			};
+
+			motor-driver {
+				compatible = "maxim,max77693-haptic";
+				haptic-supply = <&ldo26_reg>;
+				pwms = <&pwm 0 38022 0>;
+			};
+
+			charger {
+				compatible = "maxim,max77693-charger";
+
+				maxim,constant-microvolt = <4350000>;
+				maxim,min-system-microvolt = <3600000>;
+				maxim,thermal-regulation-celsius = <100>;
+				maxim,battery-overcurrent-microamp = <3500000>;
+				maxim,charge-input-threshold-microvolt = <4300000>;
+			};
+		};
+	};
+
+	i2c_max77693_fuel: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17047";
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77693_fuel_irq>;
+			reg = <0x36>;
+
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpl0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpl0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "cypress,midas-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_reg>;
+			vcc-supply = <&ldo5_reg>;
+			interrupt-parent = <&gpj0>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+			linux,keycodes = <KEY_BACK KEY_MENU>;
+		};
+	};
+
+	i2c-mhl {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-0 = <&i2c_mhl_bus>;
+		pinctrl-names = "default";
+
+		sii9234: hdmi-bridge@39 {
+			compatible = "sil,sii9234";
+			avcc33-supply = <&vcc33mhl>;
+			iovcc18-supply = <&vcc18mhl>;
+			avcc12-supply = <&vsil12>;
+			cvcc12-supply = <&vsil12>;
+			reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpf3>;
+			interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x39>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					mhl_to_hdmi: endpoint {
+						remote-endpoint = <&hdmi_to_mhl>;
+					};
+				};
+			};
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpj0 0 GPIO_ACTIVE_LOW>;
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+
+	sound: sound {
+		compatible = "samsung,midas-audio";
+		model = "Midas";
+		mic-bias-supply = <&mic_bias_reg>;
+		submic-bias-supply = <&submic_bias_reg>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+		codec {
+			sound-dai = <&wm1811>;
+		};
+	};
+
+	thermistor-ap {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 1>;  /* AP temperature */
+	};
+
+	thermistor-battery {
+		compatible = "murata,ncp15wb473";
+		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
+		pullup-ohm = <100000>;	 /* 100K */
+		pulldown-ohm = <100000>; /* 100K */
+		io-channels = <&adc 2>;  /* Battery temperature */
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	status = "okay";
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&camera {
+	pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
+	pinctrl-names = "default";
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_CAM0>,
+		<&clock CLK_MOUT_CAM1>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>,
+		<&clock CLK_XUSBXTI>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&csis_0 {
+	status = "okay";
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+			<&clock CLK_SCLK_CSIS0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+
+	/* Camera C (3) MIPI CSI-2 (CSIS0) */
+	port@3 {
+		reg = <3>;
+		csis0_ep: endpoint {
+			remote-endpoint = <&s5c73m3_ep>;
+			data-lanes = <1 2 3 4>;
+			samsung,csis-hs-settle = <12>;
+		};
+	};
+};
+
+&csis_1 {
+	status = "okay";
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+			<&clock CLK_SCLK_CSIS1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+
+	/* Camera D (4) MIPI CSI-2 (CSIS1) */
+	port@4 {
+		reg = <4>;
+		csis1_ep: endpoint {
+			remote-endpoint = <&is_s5k6a3_ep>;
+			data-lanes = <1>;
+			samsung,csis-hs-settle = <18>;
+			samsung,csis-wclk;
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,burst-clock-frequency = <500000000>;
+	samsung,esc-clock-frequency = <20000000>;
+	samsung,pll-clock-frequency = <24000000>;
+};
+
+&exynos_usbphy {
+	vbus-supply = <&esafeout1_reg>;
+	status = "okay";
+};
+
+&fimc_0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+			<&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+			<&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+			<&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+			<&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+	assigned-clock-rates = <0>, <176000000>;
+};
+
+&fimc_is {
+	pinctrl-0 = <&fimc_is_uart>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&fimc_lite_0 {
+	status = "okay";
+};
+
+&fimc_lite_1 {
+	status = "okay";
+};
+
+&fimd {
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	vdd-supply = <&ldo3_reg>;
+	vdd_osc-supply = <&ldo4_reg>;
+	vdd_pll-supply = <&ldo3_reg>;
+	ddc = <&i2c_5>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+			hdmi_to_mhl: endpoint {
+				remote-endpoint = <&mhl_to_hdmi>;
+			};
+		};
+	};
+};
+
+&hsotg {
+	vusb_d-supply = <&ldo15_reg>;
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_0 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	s5c73m3: image-sensor@3c {
+		compatible = "samsung,s5c73m3";
+		reg = <0x3c>;
+		xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */
+		vdd-int-supply = <&buck9_reg>;
+		vddio-cis-supply = <&ldo9_reg>;
+		vddio-host-supply = <&ldo18_reg>;
+		vdd-af-supply = <&cam_af_reg>;
+		vdd-reg-supply = <&cam_io_reg>;
+		clock-frequency = <24000000>;
+		/* CAM_A_CLKOUT */
+		clocks = <&camera 0>;
+		clock-names = "cis_extclk";
+		status = "disabled";
+		port {
+			s5c73m3_ep: endpoint {
+				remote-endpoint = <&csis0_ep>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+};
+
+&i2c1_isp {
+	pinctrl-0 = <&fimc_is_i2c1>;
+	pinctrl-names = "default";
+
+	image-sensor@10 {
+		compatible = "samsung,s5k6a3";
+		reg = <0x10>;
+		svdda-supply = <&cam_io_reg>;
+		svddio-supply = <&ldo19_reg>;
+		afvdd-supply = <&ldo19_reg>;
+		clock-frequency = <24000000>;
+		/* CAM_B_CLKOUT */
+		clocks = <&camera 1>;
+		clock-names = "extclk";
+		gpios = <&gpm1 6 GPIO_ACTIVE_LOW>;
+
+		port {
+			is_s5k6a3_ep: endpoint {
+				remote-endpoint = <&csis1_ep>;
+				data-lanes = <1>;
+			};
+		};
+	};
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c_4 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c4_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	wm1811: audio-codec@1a {
+		compatible = "wlf,wm1811";
+		reg = <0x1a>;
+		clocks = <&pmu_system_controller 0>,
+			<&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "MCLK1", "MCLK2";
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		#sound-dai-cells = <0>;
+
+		wlf,gpio-cfg = <0x3 0x0 0x0 0x0 0x0 0x0
+			0x0 0x8000 0x0 0x0 0x0>;
+		wlf,micbias-cfg = <0x2f 0x2b>;
+
+		wlf,lineout1-feedback;
+		wlf,lineout1-se;
+		wlf,lineout2-se;
+		wlf,ldoena-always-driven;
+
+		AVDD2-supply = <&vbatt_reg>;
+		DBVDD1-supply = <&ldo3_reg>;
+		DBVDD2-supply = <&vbatt_reg>;
+		DBVDD3-supply = <&vbatt_reg>;
+		DCVDD-supply = <&ldo3_reg>;
+		CPVDD-supply = <&vbatt_reg>;
+		SPKVDD1-supply = <&vbatt_reg>;
+		SPKVDD2-supply = <&vbatt_reg>;
+		wlf,ldo1ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpj0 4 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	max77686: pmic@9 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&max77686_irq>;
+		pinctrl-names = "default";
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "VALIVE_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VM1M2_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VCC_2.8V_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VCC_1.8V_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VMPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VPLL_1.0V_AP";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "CAM_ISP_MIPI_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VABB1_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "NFC_AVDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VABB2_1.95V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VHSIC_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VHSIC_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "CAM_SENSOR_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "CAM_ISP_SEN_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDDQ_PRE_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VMEM_VDD_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "TSP_AVDD_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "TSP_VDD_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "LDO25";
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "MOTOR_VCC_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VMEM_1.2V_AP";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VCC_SUB_1.35V";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VMEM_VDDF_3.0V";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1200000>;
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+};
+
+&i2s0 {
+	pinctrl-0 = <&i2s0_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+&mshc_0 {
+	broken-cd;
+	non-removable;
+	card-detect-delay = <200>;
+	vmmc-supply = <&ldo22_reg>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <0>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	mhl_int: mhl-int-pins {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c_mhl_bus: i2c-mhl-bus-pins {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, NONE);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, UP);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, UP);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, NONE);
+		PIN_SLP(gpc1-1, PREV, NONE);
+		PIN_SLP(gpc1-2, INPUT, NONE);
+		PIN_SLP(gpc1-3, INPUT, NONE);
+		PIN_SLP(gpc1-4, INPUT, NONE);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, INPUT, DOWN);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, INPUT, NONE);
+		PIN_SLP(gpf0-1, INPUT, NONE);
+		PIN_SLP(gpf0-2, INPUT, DOWN);
+		PIN_SLP(gpf0-3, INPUT, DOWN);
+		PIN_SLP(gpf0-4, INPUT, NONE);
+		PIN_SLP(gpf0-5, INPUT, DOWN);
+		PIN_SLP(gpf0-6, INPUT, NONE);
+		PIN_SLP(gpf0-7, INPUT, DOWN);
+
+		PIN_SLP(gpf1-0, INPUT, DOWN);
+		PIN_SLP(gpf1-1, INPUT, DOWN);
+		PIN_SLP(gpf1-2, INPUT, DOWN);
+		PIN_SLP(gpf1-3, INPUT, DOWN);
+		PIN_SLP(gpf1-4, INPUT, NONE);
+		PIN_SLP(gpf1-5, INPUT, NONE);
+		PIN_SLP(gpf1-6, INPUT, DOWN);
+		PIN_SLP(gpf1-7, PREV, NONE);
+
+		PIN_SLP(gpf2-0, PREV, NONE);
+		PIN_SLP(gpf2-1, INPUT, DOWN);
+		PIN_SLP(gpf2-2, INPUT, DOWN);
+		PIN_SLP(gpf2-3, INPUT, DOWN);
+		PIN_SLP(gpf2-4, INPUT, DOWN);
+		PIN_SLP(gpf2-5, INPUT, DOWN);
+		PIN_SLP(gpf2-6, INPUT, NONE);
+		PIN_SLP(gpf2-7, INPUT, NONE);
+
+		PIN_SLP(gpf3-0, INPUT, NONE);
+		PIN_SLP(gpf3-1, PREV, NONE);
+		PIN_SLP(gpf3-2, PREV, NONE);
+		PIN_SLP(gpf3-3, PREV, NONE);
+		PIN_SLP(gpf3-4, OUT1, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, PREV, NONE);
+		PIN_SLP(gpj0-1, PREV, NONE);
+		PIN_SLP(gpj0-2, PREV, NONE);
+		PIN_SLP(gpj0-3, INPUT, DOWN);
+		PIN_SLP(gpj0-4, PREV, NONE);
+		PIN_SLP(gpj0-5, PREV, NONE);
+		PIN_SLP(gpj0-6, INPUT, DOWN);
+		PIN_SLP(gpj0-7, INPUT, DOWN);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, PREV, NONE);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, INPUT, DOWN);
+		PIN_SLP(gpj1-4, INPUT, DOWN);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	gpio_keys: gpio-keys-pins {
+		samsung,pins = "gpx0-1", "gpx2-2", "gpx2-7", "gpx3-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_shutdown: bt-shutdown-pins {
+		samsung,pins = "gpl0-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup-pins {
+		samsung,pins = "gpx3-1";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77686_irq: max77686-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_irq: max77693-irq-pins {
+		samsung,pins = "gpx1-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77693_fuel_irq: max77693-fuel-irq-pins {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sdhci2_cd: sdhci2-cd-irq-pins {
+		samsung,pins = "gpx3-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	hdmi_hpd: hdmi-hpd-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	sleep1: sleep-state {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, OUT0, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, INPUT, DOWN);
+		PIN_SLP(gpl0-1, INPUT, DOWN);
+		PIN_SLP(gpl0-2, INPUT, DOWN);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, PREV, NONE);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, INPUT, DOWN);
+		PIN_SLP(gpl1-1, INPUT, DOWN);
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, INPUT, DOWN);
+		PIN_SLP(gpl2-2, INPUT, DOWN);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, INPUT, DOWN);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, PREV, NONE);
+		PIN_SLP(gpl2-7, INPUT, DOWN);
+
+		PIN_SLP(gpm0-0, INPUT, DOWN);
+		PIN_SLP(gpm0-1, INPUT, DOWN);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, DOWN);
+		PIN_SLP(gpm0-4, INPUT, DOWN);
+		PIN_SLP(gpm0-5, INPUT, DOWN);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, INPUT, DOWN);
+
+		PIN_SLP(gpm1-0, INPUT, DOWN);
+		PIN_SLP(gpm1-1, INPUT, DOWN);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, INPUT, DOWN);
+		PIN_SLP(gpm2-3, INPUT, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, OUT1, NONE);
+		PIN_SLP(gpm3-4, INPUT, DOWN);
+		PIN_SLP(gpm3-5, INPUT, DOWN);
+		PIN_SLP(gpm3-6, INPUT, DOWN);
+		PIN_SLP(gpm3-7, INPUT, DOWN);
+
+		PIN_SLP(gpm4-0, INPUT, DOWN);
+		PIN_SLP(gpm4-1, INPUT, DOWN);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, INPUT, DOWN);
+		PIN_SLP(gpm4-5, INPUT, DOWN);
+		PIN_SLP(gpm4-6, INPUT, DOWN);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, DOWN);
+		PIN_SLP(gpy0-3, INPUT, DOWN);
+		PIN_SLP(gpy0-4, INPUT, DOWN);
+		PIN_SLP(gpy0-5, INPUT, DOWN);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-state {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-state {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo21_reg>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	non-removable;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_NONE>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&spi_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_bus>;
+	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	s5c73m3_spi: image-sensor@0 {
+		compatible = "samsung,s5c73m3";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		controller-data {
+			samsung,spi-feedback-delay = <2>;
+		};
+	};
+};
+
+&tmu {
+	vtmu-supply = <&ldo10_reg>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-n710x.dts b/arch/arm/boot/dts/exynos4412-n710x.dts
new file mode 100644
index 000000000000..9ae05b0d684c
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-n710x.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+#include "exynos4412-midas.dtsi"
+
+/ {
+	compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
+	chassis-type = "handset";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	/* bootargs are passed in by bootloader */
+
+	cam_vdda_reg: voltage-regulator-10 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_SENSOR_CORE_1.2V";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpm4 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&buck9_reg {
+	maxim,ena-gpios = <&gpm1 0 GPIO_ACTIVE_HIGH>;
+};
+
+&cam_af_reg {
+	gpio = <&gpm1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&cam_io_reg {
+	gpio = <&gpm0 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@48 {
+		compatible = "melfas,mms152";
+		reg = <0x48>;
+		interrupt-parent = <&gpm2>;
+		interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <720>;
+		touchscreen-size-y = <1280>;
+		avdd-supply = <&ldo23_reg>;
+		vdd-supply = <&ldo24_reg>;
+	};
+};
+
+&ldo13_reg {
+	regulator-name = "VCC_1.8V_LCD";
+	regulator-always-on;
+};
+
+&ldo25_reg {
+	regulator-name = "VCI_3.0V_LCD";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+};
+
+&s5c73m3 {
+	standby-gpios = <&gpm0 6 GPIO_ACTIVE_LOW>;   /* ISP_STANDBY */
+	vdda-supply = <&cam_vdda_reg>;
+	status = "okay";
+};
+
+&sound {
+	samsung,audio-routing =
+		"HP", "HPOUT1L",
+		"HP", "HPOUT1R",
+
+		"SPK", "SPKOUTLN",
+		"SPK", "SPKOUTLP",
+
+		"RCV", "HPOUT2N",
+		"RCV", "HPOUT2P",
+
+		"HDMI", "LINEOUT1N",
+		"HDMI", "LINEOUT1P",
+
+		"LINE", "LINEOUT2N",
+		"LINE", "LINEOUT2P",
+
+		"IN1LP", "MICBIAS2",
+		"IN1LN", "MICBIAS2",
+		"Headset Mic", "MICBIAS2",
+
+		"IN1RP", "Sub Mic",
+		"IN1RN", "Sub Mic",
+
+		"IN2LP:VXRN", "Main Mic",
+		"IN2LN", "Main Mic",
+
+		"IN2RN", "FM In",
+		"IN2RP:VXRP", "FM In";
+};
+
+&submic_bias_reg {
+	regulator-always-on;
+};
+
+&touchkey_reg {
+	gpio = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index ca7d168d1dd6..45ef7b7ba7e0 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -1,82 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards
  * device tree source
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 #include <dt-bindings/sound/samsung-i2s.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/maxim,max77686.h>
 #include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_1;
 	};
 
-	firmware@0204F000 {
+	firmware@204f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
+		reg = <0x0204f000 0x1000>;
 	};
 
-	gpio_keys {
+	gpio_keys: gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_power_key>;
 
-		power_key {
-			interrupt-parent = <&gpx1>;
-			interrupts = <3 0>;
-			gpios = <&gpx1 3 1>;
+		power-key {
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			label = "power key";
 			debounce-interval = <10>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
 	sound: sound {
-		compatible = "simple-audio-card";
-		assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
-				<&clock_audss EXYNOS_MOUT_I2S>,
-				<&clock_audss EXYNOS_DOUT_SRP>,
-				<&clock_audss EXYNOS_DOUT_AUD_BUS>;
-		assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
-				<&clock_audss EXYNOS_MOUT_AUDSS>;
-		assigned-clock-rates = <0>,
-				<0>,
-				<192000000>,
-				<19200000>;
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-
-		simple-audio-card,cpu {
+		compatible = "hardkernel,odroid-xu4-audio";
+
+		cpu {
 			sound-dai = <&i2s0 0>;
-			system-clock-frequency = <19200000>;
 		};
 
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&max98090>;
-			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		codec {
+			sound-dai = <&hdmi>, <&max98090>;
 		};
 	};
 
 	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&sd1_cd>;
+		pinctrl-0 = <&emmc_rstn>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpk1 2 1>;
-	};
-
-	camera {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <>;
+		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
 	};
 
 	fixed-rate-clocks {
@@ -90,45 +71,132 @@
 			clock-frequency = <24000000>;
 		};
 	};
+};
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 7 7>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 13 13>;
-			       };
-		       };
-		};
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&camera {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <>;
+};
+
+&clock {
+	clocks = <&clock CLK_XUSBXTI>;
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <45158401>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			<&clock_audss EXYNOS_DOUT_I2S>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			  <&clock_audss EXYNOS_MOUT_AUDSS>;
+
+	assigned-clock-rates = <0>, <0>,
+			<196608001>,
+			<(196608001 / 2)>,
+			<(196608001 / 8)>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu0_opp_table {
+	opp-1000000000 {
+		opp-suspend;
+	};
+	opp-800000000 {
+		/delete-property/opp-suspend;
 	};
 };
 
-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <0>;
-	samsung,pin-drv = <0>;
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
 };
 
 &pinctrl_1 {
-	gpio_power_key: power_key {
+	gpio_power_key: power-key-pins {
 		samsung,pins = "gpx1-3";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd: hdmi-hpd {
+	hdmi_hpd: hdmi-hpd-pins {
 		samsung,pins = "gpx3-7";
-		samsung,pin-pud = <1>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	emmc_rstn: emmc-rstn-pins {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
@@ -172,12 +240,13 @@
 	assigned-clock-rates = <0>, <176000000>;
 };
 
-&g2d {
+&gpu {
+	mali-supply = <&buck4_reg>;
 	status = "okay";
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 0>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd>;
 	vdd-supply = <&ldo8_reg>;
@@ -187,36 +256,38 @@
 	status = "okay";
 };
 
+&hdmicec {
+	status = "okay";
+};
+
 &hsotg {
-	dr_mode = "peripheral";
 	status = "okay";
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
 };
 
 &i2c_0 {
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <400000>;
 	status = "okay";
 
-	usb3503: usb3503@08 {
+	usb3503: usb-hub@8 {
 		compatible = "smsc,usb3503";
 		reg = <0x08>;
 
-		intn-gpios = <&gpx3 0 0>;
-		connect-gpios = <&gpx3 4 0>;
-		reset-gpios = <&gpx3 5 0>;
+		intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
 		initial-mode = <1>;
 	};
 
-	max77686: pmic@09 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
 		reg = <0x09>;
 		#clock-cells = <1>;
 
@@ -246,7 +317,6 @@
 				regulator-name = "VDDQ_MMC2_2.8V";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
 				regulator-boot-on;
 			};
 
@@ -272,15 +342,13 @@
 				regulator-always-on;
 			};
 
-			ldo8_reg: ldo@8 {
-				regulator-compatible = "LDO8";
+			ldo8_reg: LDO8 {
 				regulator-name = "VDD10_HDMI_1.0V";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <1000000>;
 			};
 
-			ldo10_reg: ldo@10 {
-				regulator-compatible = "LDO10";
+			ldo10_reg: LDO10 {
 				regulator-name = "VDDQ_MIPIHSI_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -337,14 +405,21 @@
 				regulator-name = "LDO20_1.8V";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-boot-on;
 			};
 
 			ldo21_reg: LDO21 {
-				regulator-name = "LDO21_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
+				regulator-name = "TFLASH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo22_reg: LDO22 {
+				/*
+				 * Only U3 uses it, so let it define the
+				 * constraints
+				 */
+				regulator-name = "LDO22";
 				regulator-boot-on;
 			};
 
@@ -357,15 +432,15 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
@@ -373,15 +448,15 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1050000>;
 				regulator-always-on;
 				regulator-boot-on;
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-microvolt-offset = <50000>;
@@ -411,23 +486,23 @@
 			};
 
 			buck8_reg: BUCK8 {
+				/*
+				 * Constraints set by specific board: X,
+				 * X2 and U3.
+				 */
 				regulator-name = "BUCK8_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
 			};
 		};
 	};
 };
 
 &i2c_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_bus>;
 	status = "okay";
-	max98090: max98090@10 {
+	max98090: audio-codec@10 {
 		compatible = "maxim,max98090";
 		reg = <0x10>;
 		interrupt-parent = <&gpx0>;
-		interrupts = <0 0>;
+		interrupts = <0 IRQ_TYPE_NONE>;
 		clocks = <&i2s0 CLK_I2S_CDCLK>;
 		clock-names = "mclk";
 		#sound-dai-cells = <0>;
@@ -436,8 +511,6 @@
 
 &i2c_2 {
 	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_bus>;
 };
 
 &i2c_8 {
@@ -448,10 +521,8 @@
 	pinctrl-0 = <&i2s0_bus>;
 	pinctrl-names = "default";
 	status = "okay";
-	clocks = <&clock_audss EXYNOS_I2S_BUS>,
-		 <&clock_audss EXYNOS_DOUT_AUD_BUS>,
-		 <&clock_audss EXYNOS_SCLK_I2S>;
-	clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
 };
 
 &mixer {
@@ -461,13 +532,13 @@
 &mshc_0 {
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo20_reg &buck8_reg>;
+	vmmc-supply = <&ldo20_reg>;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	status = "okay";
 
-	num-slots = <1>;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -485,9 +556,9 @@
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 	pinctrl-names = "default";
-	vmmc-supply = <&ldo4_reg &ldo21_reg>;
-	cd-gpios = <&gpk2 2 0>;
-	cd-inverted;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
+	cd-gpios = <&gpk2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -503,7 +574,3 @@
 	vtmu-supply = <&ldo10_reg>;
 	status = "okay";
 };
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
index 44684e57ead1..42812da1f882 100644
--- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Hardkernel's Exynos4412 based ODROID-U3 board device tree source
  *
@@ -5,32 +6,107 @@
  *
  * Device tree source file for Hardkernel's ODROID-U3 board which is based
  * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-odroid-common.dtsi"
+#include "exynos4412-prime.dtsi"
 
 / {
 	model = "Hardkernel ODROID-U3 board based on Exynos4412";
 	compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
-		reg = <0x40000000 0x7FF00000>;
+	aliases {
+		ethernet = &ethernet;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7ff00000>;
+	};
+
+	vbus_otg_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VBUS_VDD_5.0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpl2 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 10000 0>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 102 170 230>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	/* Nothing connected to ADC inputs, keep it disabled */
+};
+
+/* Supply for LAN9730/SMSC95xx */
+&buck8_reg {
+	regulator-name = "BUCK8_P3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert1>;
+			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
+					 <&cpu2 9 9>, <&cpu3 9 9>,
+					 <&fan0 1 2>;
+		};
+		map1 {
+			trip = <&cpu_alert2>;
+			cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
+					 <&cpu2 15 15>, <&cpu3 15 15>,
+					 <&fan0 2 3>;
+		};
+		map2 {
+			trip = <&cpu_alert0>;
+			cooling-device = <&fan0 0 1>;
+		};
+	};
+};
+
+&hdmicec {
+	needs-hpd;
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&ldo22_reg {
+	regulator-name = "LDO22_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
+&mshc_0 {
+	vqmmc-supply = <&ldo22_reg>;
+};
+
+&pwm {
+	pinctrl-0 = <&pwm0_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>;
+	status = "okay";
 };
 
 &usb3503 {
@@ -40,20 +116,29 @@
 };
 
 &ehci {
-	port@1 {
-		status = "okay";
-	};
-	port@2 {
-		status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+	phy-names = "hsic0", "hsic1";
+
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
+		reg = <2>;
+		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
 	};
 };
 
+&hsotg {
+	dr_mode = "otg";
+	vbus-supply = <&vbus_otg_reg>;
+};
+
 &sound {
-	simple-audio-card,name = "Odroid-U3";
-	simple-audio-card,widgets =
+	model = "Odroid-U3";
+	samsung,audio-widgets =
 		"Headphone", "Headphone Jack",
 		"Speakers", "Speakers";
-	simple-audio-card,routing =
+	samsung,audio-routing =
 		"Headphone Jack", "HPL",
 		"Headphone Jack", "HPR",
 		"Headphone Jack", "MICBIAS",
@@ -61,3 +146,10 @@
 		"Speakers", "SPKL",
 		"Speakers", "SPKR";
 };
+
+&spi_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_bus>;
+	cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 679ac103ebf6..d5316cf2fbb6 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Hardkernel's Exynos4412 based ODROID-X board device tree source
  *
@@ -5,74 +6,118 @@
  *
  * Device tree source file for Hardkernel's ODROID-X board which is based
  * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
+#include <dt-bindings/leds/common.h>
 #include "exynos4412-odroid-common.dtsi"
 
 / {
 	model = "Hardkernel ODROID-X board based on Exynos4412";
 	compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
-		reg = <0x40000000 0x3FF00000>;
+	aliases {
+		ethernet = &ethernet;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x3ff00000>;
 	};
 
 	leds {
 		compatible = "gpio-leds";
 		led1 {
-			label = "led1:heart";
-			gpios = <&gpc1 0 1>;
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpc1 0 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 		led2 {
 			label = "led2:mmc0";
-			gpios = <&gpc1 2 1>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpc1 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "mmc0";
 		};
 	};
 
-	gpio_keys {
-		pinctrl-0 = <&gpio_power_key &gpio_home_key>;
-
-		home_key {
-			interrupt-parent = <&gpx2>;
-			interrupts = <2 0>;
-			gpios = <&gpx2 2 0>;
-			linux,code = <KEY_HOME>;
-			label = "home key";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	regulator_p3v3 {
+	regulator-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "p3v3_en";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpio = <&gpa1 1 1>;
+		gpio = <&gpa1 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 	};
 };
 
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	status = "okay";
+};
+
+/* VDDQ for MSHC (eMMC card) */
+&buck8_reg {
+	regulator-name = "BUCK8_VDDQ_MMC4_2.8V";
+	regulator-min-microvolt = <2800000>;
+	regulator-max-microvolt = <2800000>;
+};
+
 &ehci {
-	port@1 {
-		status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	phys = <&exynos_usbphy 2>;
+	phy-names = "hsic0";
+
+	hub@2 {
+		compatible = "usb424,3503";
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hub@1 {
+			compatible = "usb424,9514";
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			ethernet: ethernet@1 {
+				compatible = "usb424,ec00";
+				reg = <1>;
+				/* Filled in by a bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+			};
+		};
+	};
+};
+
+&gpio_keys {
+	pinctrl-0 = <&gpio_power_key &gpio_home_key>;
+
+	home-key {
+		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+		linux,code = <KEY_HOME>;
+		label = "home key";
+		debounce-interval = <10>;
+		wakeup-source;
 	};
 };
 
+&hsotg {
+	dr_mode = "peripheral";
+};
+
+&mshc_0 {
+	vqmmc-supply = <&buck8_reg>;
+};
+
 &pinctrl_1 {
-	gpio_home_key: home_key {
+	gpio_home_key: home-key-pins {
 		samsung,pins = "gpx2-2";
-		samsung,pin-pud = <0>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 	};
 };
 
@@ -83,3 +128,16 @@
 &serial_3 {
 	status = "okay";
 };
+
+&sound {
+	model = "Odroid-X";
+	samsung,audio-widgets =
+		"Headphone", "Headphone Jack",
+		"Microphone", "Mic Jack",
+		"Microphone", "DMIC";
+	samsung,audio-routing =
+		"Headphone Jack", "HPL",
+		"Headphone Jack", "HPR",
+		"IN1", "Mic Jack",
+		"Mic Jack", "MICBIAS";
+};
diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts
index 6e33678562ae..7be4cbdc4413 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx2.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Hardkernel's Exynos4412 based ODROID-X2 board device tree source
  *
@@ -5,32 +6,17 @@
  *
  * Device tree source file for Hardkernel's ODROID-X2 board which is based
  * on Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 #include "exynos4412-odroidx.dts"
+#include "exynos4412-prime.dtsi"
 
 / {
 	model = "Hardkernel ODROID-X2 board based on Exynos4412";
 	compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
-		reg = <0x40000000 0x7FF00000>;
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7ff00000>;
 	};
 };
-
-&sound {
-	simple-audio-card,name = "Odroid-X2";
-	simple-audio-card,widgets =
-		"Headphone", "Headphone Jack",
-		"Microphone", "Mic Jack",
-		"Microphone", "DMIC";
-	simple-audio-card,routing =
-		"Headphone Jack", "HPL",
-		"Headphone Jack", "HPR",
-		"IN1", "Mic Jack",
-		"Mic Jack", "MICBIAS";
-};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 84c76310b312..23b151645d66 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Insignal's Exynos4412 based Origen board device tree source
  *
@@ -6,48 +7,45 @@
  *
  * Device tree source file for Insignal's Origen board which is based on
  * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Insignal Origen evaluation board based on Exynos4412";
 	compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &mshc_0;
+		mmc1 = &sdhci_2;
+	};
+
 	chosen {
-		bootargs ="console=ttySAC2,115200";
-		stdout-path = &serial_2;
+		stdout-path = "serial2:115200n8";
 	};
 
-	firmware@0203F000 {
+	firmware@203f000 {
 		compatible = "samsung,secure-firmware";
-		reg = <0x0203F000 0x1000>;
+		reg = <0x0203f000 0x1000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		mmc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "VMEM_VDD_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 0>;
-			enable-active-high;
-		};
+	mmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	display-timings {
@@ -78,13 +76,39 @@
 	};
 };
 
-&fimd {
-	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
-	pinctrl-names = "default";
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 	status = "okay";
+	phys = <&exynos_usbphy 2>, <&exynos_usbphy 3>;
+	phy-names = "hsic0", "hsic1";
 };
 
-&g2d {
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+	pinctrl-names = "default";
 	status = "okay";
 };
 
@@ -97,19 +121,19 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	s5m8767_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 
 		s5m8767,pmic-buck-default-dvs-idx = <3>;
 
-		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>,
-						 <&gpx2 4 0>,
-						 <&gpx2 5 0>;
+		s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 4 GPIO_ACTIVE_HIGH>,
+						 <&gpx2 5 GPIO_ACTIVE_HIGH>;
 
-		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>,
-						<&gpm3 6 0>,
-						<&gpm3 7 0>;
+		s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>,
+						<&gpm3 6 GPIO_ACTIVE_HIGH>,
+						<&gpm3 7 GPIO_ACTIVE_HIGH>;
 
 		s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>,
 						 <1200000>, <1200000>,
@@ -125,6 +149,14 @@
 						 <1200000>, <1200000>,
 						 <1200000>, <1200000>,
 						 <1200000>, <1200000>;
+		wakeup-source;
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap", "s5m8767_cp",
+					     "s5m8767_bt";
+		};
 
 		regulators {
 			ldo1_reg: LDO1 {
@@ -353,63 +385,63 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt	= <1100000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt	= <1350000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt	= <1200000>;
+				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <1500000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
 			};
 
 			buck5_reg: BUCK5 {
-				regulator-name = "vdd_m12";
+				regulator-name = "VDD_M12";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <1500000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
 			};
 
 			buck6_reg: BUCK6 {
-				regulator-name = "vdd12_5m";
+				regulator-name = "VDD12_5M";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <1500000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
 			};
 
 			buck9_reg: BUCK9 {
-				regulator-name = "vddf28_emmc";
+				regulator-name = "VDDF28_EMMC";
 				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt	= <3000000>;
+				regulator-max-microvolt = <3000000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>; /* Normal Mode */
@@ -422,62 +454,56 @@
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <2>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";
 
-	key_home {
+	key-home {
 		keypad,row = <0>;
 		keypad,column = <0>;
 		linux,code = <KEY_HOME>;
 	};
 
-	key_down {
+	key-down {
 		keypad,row = <0>;
 		keypad,column = <1>;
 		linux,code = <KEY_DOWN>;
 	};
 
-	key_up {
+	key-up {
 		keypad,row = <1>;
 		keypad,column = <0>;
 		linux,code = <KEY_UP>;
 	};
 
-	key_menu {
+	key-menu {
 		keypad,row = <1>;
 		keypad,column = <1>;
 		linux,code = <KEY_MENU>;
 	};
 
-	key_back {
+	key-back {
 		keypad,row = <2>;
 		keypad,column = <0>;
 		linux,code = <KEY_BACK>;
 	};
 
-	key_enter {
+	key-enter {
 		keypad,row = <2>;
 		keypad,column = <1>;
 		linux,code = <KEY_ENTER>;
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &mshc_0 {
 	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
 	pinctrl-names = "default";
 	status = "okay";
 
-	num-slots = <1>;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -486,23 +512,25 @@
 };
 
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &sdhci_2 {
@@ -528,7 +556,3 @@
 &serial_3 {
 	status = "okay";
 };
-
-&watchdog {
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412-p4note-n8010.dts b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
new file mode 100644
index 000000000000..0932ec5866cc
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-p4note-n8010.dts
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Galaxy Note 10.1 - N801x (wifi only version)
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4412-p4note.dtsi"
+
+/ {
+	model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
+	compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "tablet";
+
+	/* this is the base variant without any kind of modem */
+};
diff --git a/arch/arm/boot/dts/exynos4412-p4note.dtsi b/arch/arm/boot/dts/exynos4412-p4note.dtsi
new file mode 100644
index 000000000000..0b89d5682f85
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-p4note.dtsi
@@ -0,0 +1,1229 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 based p4note device family base DT.
+ * Based on exynos4412-midas.dtsi.
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/summit,smb347-charger.h>
+#include "exynos-pinctrl.h"
+
+/ {
+	compatible = "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	aliases {
+		mmc0 = &mshc_0;
+		mmc2 = &sdhci_2;
+		mmc3 = &sdhci_3;
+	};
+
+	chosen {
+		stdout-path = &serial_2;
+	};
+
+	firmware@204f000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x0204f000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		key-down {
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		key-up {
+			gpios = <&gpx3 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		key-power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+	};
+
+	voltage-regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_LDO1";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_reg_gpio_1>;
+		gpios = <&gpm4 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	voltage-regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_LDO2";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_reg_gpio_2>;
+		gpios = <&gpb 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	voltage-regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_LDO3";
+		pinctrl-names = "default";
+		pinctrl-0 = <&tsp_reg_gpio_3>;
+		gpios = <&gpb 7 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <20000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	panel_vdd: voltage-regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_ENABLE";
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_enable>;
+		gpios = <&gpc0 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpm3 5 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&wifi_reset>;
+		pinctrl-names = "default";
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+
+	battery_cell: battery-cell {
+		compatible = "simple-battery";
+		device-chemistry = "lithium-ion";
+		constant-charge-current-max-microamp = <2200000>;
+		precharge-current-microamp = <250000>;
+		charge-term-current-microamp = <250000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+	};
+
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "asahi-kasei,ak8975";
+			reg = <0x0c>;
+			pinctrl-0 = <&ak8975_irq>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpm4>;
+			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+
+	i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpy0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		fuel-gauge@36 {
+			compatible = "maxim,max17042";
+			reg = <0x36>;
+			pinctrl-0 = <&fuel_alert_irq>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+			maxim,rsns-microohm = <10000>;
+			maxim,over-heat-temp = <600>;
+			maxim,over-volt = <4300>;
+		};
+	};
+
+	i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc@41 {
+			compatible = "st,stmpe811";
+			reg = <0x41>;
+			pinctrl-0 = <&stmpe_adc_irq>;
+			pinctrl-names = "default";
+			interrupt-parent = <&gpx0>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+			st,adc-freq = <3>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,sample-time = <3>;
+
+			adc {
+				compatible = "st,stmpe-adc";
+				#io-channel-cells = <1>;
+				st,norequest-mask = <0x2f>;
+			};
+		};
+	};
+
+	i2c-gpio-4 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		power_supply: charger@6 {
+			compatible = "summit,smb347";
+			reg = <0x6>;
+			summit,enable-usb-charging;
+			summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+			summit,fast-voltage-threshold-microvolt = <2600000>;
+			summit,chip-temperature-threshold-celsius = <130>;
+			summit,usb-current-limit-microamp = <1800000>;
+
+			monitored-battery = <&battery_cell>;
+		};
+	};
+
+	panel {
+		compatible = "samsung,ltl101al01";
+		pinctrl-0 = <&lvds_nshdn>;
+		pinctrl-names = "default";
+		power-supply = <&panel_vdd>;
+		enable-gpios = <&gpm0 5 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+
+		port {
+			lcd_ep: endpoint {
+				remote-endpoint = <&fimd_ep>;
+			};
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-0 = <&led_bl_reset>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpm0 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&panel_vdd>;
+		pwms = <&pwm 1 78770 0>;
+		brightness-levels = <0 48 128 255>;
+		num-interpolated-steps = <8>;
+		default-brightness-level = <12>;
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo3_reg>;
+	/* not verified */
+	status = "okay";
+};
+
+&bus_dmc {
+	devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&bus_acp {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_c2c {
+	devfreq = <&bus_dmc>;
+	status = "okay";
+};
+
+&bus_leftbus {
+	devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+	vdd-supply = <&buck3_reg>;
+	status = "okay";
+};
+
+&bus_rightbus {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_display {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_fsys {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_peri {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&bus_mfc {
+	devfreq = <&bus_leftbus>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&cpu_thermal {
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	status = "okay";
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk &lcd_data24>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	samsung,invert-vclk;
+
+	port@3 {
+		reg = <3>;
+
+		fimd_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&hsotg {
+	vusb_a-supply = <&ldo12_reg>;
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&i2c_3 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+		pinctrl-0 = <&tsp_rst &tsp_irq>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpm2>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpm0 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c_7 {
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	max77686: pmic@9 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&max77686_irq>;
+		pinctrl-names = "default";
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "ldo1";
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "ldo2";
+				regulator-always-on;
+			};
+
+			/* WM8994 audio */
+			ldo3_reg: LDO3 {
+				regulator-name = "VCC_1.8V_AP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "ldo4";
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VCC_1.8V_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "ldo6";
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "ldo7";
+				regulator-always-on;
+			};
+
+			/* CSI IP block */
+			ldo8_reg: LDO8 {
+				regulator-name = "VMIPI_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* IR LED on/off */
+			ldo9_reg: LDO9 {
+				regulator-name = "VLED_IC_1.9V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* CSI IP block */
+			ldo10_reg: LDO10 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VABB1_1.9V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* USB OTG */
+			ldo12_reg: LDO12 {
+				regulator-name = "VUOTG_3.0V";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			/* not connected */
+			ldo13_reg: LDO13 {
+				regulator-name = "ldo13";
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VABB2_1.9V";
+				regulator-min-microvolt = <1950000>;
+				regulator-max-microvolt = <1950000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "ldo15";
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "ldo16";
+				regulator-always-on;
+			};
+
+			/* not connected */
+			ldo17_reg: LDO17 {
+				regulator-name = "ldo17";
+			};
+
+			/* Camera ISX012 */
+			ldo18_reg: LDO18 {
+				regulator-name = "CAM_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Camera S5K6A3 */
+			ldo19_reg: LDO19 {
+				regulator-name = "VT_CORE_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* not connected */
+			ldo20_reg: LDO20 {
+				regulator-name = "ldo20";
+			};
+
+			/* MMC2 */
+			ldo21_reg: LDO21 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			/* not connected */
+			ldo22_reg: LDO22 {
+				regulator-name = "ldo22";
+			};
+
+			/* ADC */
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_ADC_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Camera S5K6A3 */
+			ldo24_reg: LDO24 {
+				regulator-name = "CAM_A2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VLED_3.3V";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			/* Camera ISX012 */
+			ldo26_reg: LDO26 {
+				regulator-name = "3MP_AF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1075000>;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "buck5";
+				regulator-always-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "buck6";
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-always-on;
+			};
+
+			/* not connected */
+			buck8_reg: BUCK8 {
+				regulator-name = "buck8";
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "3MP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mshc_0 {
+	broken-cd;
+	non-removable;
+	card-detect-delay = <200>;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <0>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	mmc-ddr-1_8v;
+	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	status = "okay";
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	tsp_reg_gpio_2: tsp-reg-gpio-2-pins {
+		samsung,pins = "gpb-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_reg_gpio_3: tsp-reg-gpio-3-pins {
+		samsung,pins = "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	lcd_enable: lcd-enable-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sleep0: sleep-state {
+		PIN_SLP(gpa0-0, INPUT, NONE);
+		PIN_SLP(gpa0-1, OUT0, NONE);
+		PIN_SLP(gpa0-2, INPUT, NONE);
+		PIN_SLP(gpa0-3, INPUT, UP);
+		PIN_SLP(gpa0-4, INPUT, NONE);
+		PIN_SLP(gpa0-5, INPUT, DOWN);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, INPUT, UP);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, INPUT, DOWN);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, INPUT, DOWN);
+		PIN_SLP(gpa1-4, INPUT, DOWN);
+		PIN_SLP(gpa1-5, INPUT, DOWN);
+
+		PIN_SLP(gpb-0, INPUT, NONE);
+		PIN_SLP(gpb-1, INPUT, NONE);
+		PIN_SLP(gpb-2, INPUT, NONE);
+		PIN_SLP(gpb-3, INPUT, NONE);
+		PIN_SLP(gpb-4, INPUT, DOWN);
+		PIN_SLP(gpb-5, INPUT, DOWN);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, INPUT, DOWN);
+
+		PIN_SLP(gpc0-0, INPUT, DOWN);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, INPUT, DOWN);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, INPUT, DOWN);
+
+		PIN_SLP(gpc1-0, INPUT, UP);
+		PIN_SLP(gpc1-1, PREV, NONE);
+		PIN_SLP(gpc1-2, INPUT, UP);
+		PIN_SLP(gpc1-3, INPUT, UP);
+		PIN_SLP(gpc1-4, INPUT, UP);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, NONE);
+		PIN_SLP(gpd0-3, INPUT, NONE);
+
+		PIN_SLP(gpd1-0, INPUT, DOWN);
+		PIN_SLP(gpd1-1, INPUT, DOWN);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, OUT0, NONE);
+		PIN_SLP(gpf3-5, OUT0, NONE);
+
+		PIN_SLP(gpj0-0, INPUT, DOWN);
+		PIN_SLP(gpj0-1, INPUT, DOWN);
+		PIN_SLP(gpj0-2, INPUT, DOWN);
+		PIN_SLP(gpj0-3, PREV, NONE);
+		PIN_SLP(gpj0-4, PREV, NONE);
+		PIN_SLP(gpj0-5, OUT0, NONE);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, OUT0, NONE);
+
+		PIN_SLP(gpj1-0, OUT0, NONE);
+		PIN_SLP(gpj1-1, INPUT, DOWN);
+		PIN_SLP(gpj1-2, PREV, NONE);
+		PIN_SLP(gpj1-3, OUT0, NONE);
+	};
+};
+
+&pinctrl_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep1>;
+
+	sd3_wifi: sd3-wifi-pins {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_shutdown: bt-shutdown-pins {
+		samsung,pins = "gpl0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	uart_sel: uart-sel-pins {
+		samsung,pins = "gpl2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-val = <1>;
+		/* 0 = CP, 1 = AP (serial output) */
+	};
+
+	led_bl_reset: led-bl-reset-pins {
+		samsung,pins = "gpm0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_rst: tsp-rst-pins {
+		samsung,pins = "gpm0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	lvds_nshdn: lvds-nshdn-pins {
+		samsung,pins = "gpm0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_irq: tsp-irq-pins {
+		samsung,pins = "gpm2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wifi_reset: wifi-reset-pins {
+		samsung,pins = "gpm3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp_reg_gpio_1: tsp-reg-gpio-1-pins {
+		samsung,pins = "gpm4-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	ak8975_irq: ak8975-irq-pins {
+		samsung,pins = "gpm4-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	stmpe_adc_irq: stmpe-adc-irq-pins {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max77686_irq: max77686-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	gpio_keys: gpio-keys-pins {
+		samsung,pins = "gpx2-2", "gpx2-7", "gpx3-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	fuel_alert_irq: fuel-alert-irq-pins {
+		samsung,pins = "gpx2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	wifi_host_wake: wifi-host-wake-pins {
+		samsung,pins = "gpx2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+
+	bt_host_wakeup: bt-host-wakeup-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	bt_device_wakeup: bt-device-wakeup-pins {
+		samsung,pins = "gpx3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sdhci2_cd: sdhci2-cd-pins {
+		samsung,pins = "gpx3-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	sleep1: sleep-state {
+		PIN_SLP(gpk0-0, PREV, NONE);
+		PIN_SLP(gpk0-1, PREV, NONE);
+		PIN_SLP(gpk0-2, PREV, NONE);
+		PIN_SLP(gpk0-3, PREV, NONE);
+		PIN_SLP(gpk0-4, PREV, NONE);
+		PIN_SLP(gpk0-5, PREV, NONE);
+		PIN_SLP(gpk0-6, PREV, NONE);
+
+		PIN_SLP(gpk1-0, INPUT, DOWN);
+		PIN_SLP(gpk1-1, INPUT, DOWN);
+		PIN_SLP(gpk1-2, INPUT, DOWN);
+		PIN_SLP(gpk1-3, PREV, NONE);
+		PIN_SLP(gpk1-4, PREV, NONE);
+		PIN_SLP(gpk1-5, PREV, NONE);
+		PIN_SLP(gpk1-6, PREV, NONE);
+
+		PIN_SLP(gpk2-0, INPUT, DOWN);
+		PIN_SLP(gpk2-1, INPUT, DOWN);
+		PIN_SLP(gpk2-2, INPUT, DOWN);
+		PIN_SLP(gpk2-3, INPUT, DOWN);
+		PIN_SLP(gpk2-4, INPUT, DOWN);
+		PIN_SLP(gpk2-5, INPUT, DOWN);
+		PIN_SLP(gpk2-6, INPUT, DOWN);
+
+		PIN_SLP(gpk3-0, OUT0, NONE);
+		PIN_SLP(gpk3-1, INPUT, NONE);
+		PIN_SLP(gpk3-2, INPUT, DOWN);
+		PIN_SLP(gpk3-3, INPUT, NONE);
+		PIN_SLP(gpk3-4, INPUT, NONE);
+		PIN_SLP(gpk3-5, INPUT, NONE);
+		PIN_SLP(gpk3-6, INPUT, NONE);
+
+		PIN_SLP(gpl0-0, OUT0, NONE);
+		PIN_SLP(gpl0-1, INPUT, NONE);
+		PIN_SLP(gpl0-2, INPUT, NONE);
+		PIN_SLP(gpl0-3, INPUT, DOWN);
+		PIN_SLP(gpl0-4, PREV, NONE);
+		PIN_SLP(gpl0-6, PREV, NONE);
+
+		PIN_SLP(gpl1-0, OUT0, NONE);
+		PIN_SLP(gpl1-1, OUT0, NONE);
+
+		PIN_SLP(gpl2-0, INPUT, DOWN);
+		PIN_SLP(gpl2-1, INPUT, DOWN);
+		PIN_SLP(gpl2-2, INPUT, DOWN);
+		PIN_SLP(gpl2-3, INPUT, DOWN);
+		PIN_SLP(gpl2-4, OUT0, NONE);
+		PIN_SLP(gpl2-5, INPUT, DOWN);
+		PIN_SLP(gpl2-6, PREV, NONE);
+		PIN_SLP(gpl2-7, PREV, NONE);
+
+		PIN_SLP(gpm0-0, PREV, NONE);
+		PIN_SLP(gpm0-1, OUT0, NONE);
+		PIN_SLP(gpm0-2, INPUT, DOWN);
+		PIN_SLP(gpm0-3, INPUT, NONE);
+		PIN_SLP(gpm0-4, OUT0, NONE);
+		PIN_SLP(gpm0-5, OUT0, NONE);
+		PIN_SLP(gpm0-6, INPUT, DOWN);
+		PIN_SLP(gpm0-7, OUT0, NONE);
+
+		PIN_SLP(gpm1-0, INPUT, NONE);
+		PIN_SLP(gpm1-1, INPUT, NONE);
+		PIN_SLP(gpm1-2, INPUT, NONE);
+		PIN_SLP(gpm1-3, INPUT, NONE);
+		PIN_SLP(gpm1-4, INPUT, NONE);
+		PIN_SLP(gpm1-5, INPUT, NONE);
+		PIN_SLP(gpm1-6, INPUT, DOWN);
+
+		PIN_SLP(gpm2-0, INPUT, NONE);
+		PIN_SLP(gpm2-1, INPUT, NONE);
+		PIN_SLP(gpm2-2, OUT0, NONE);
+		PIN_SLP(gpm2-3, OUT0, DOWN);
+		PIN_SLP(gpm2-4, INPUT, DOWN);
+
+		PIN_SLP(gpm3-0, PREV, NONE);
+		PIN_SLP(gpm3-1, PREV, NONE);
+		PIN_SLP(gpm3-2, PREV, NONE);
+		PIN_SLP(gpm3-3, OUT1, NONE);
+		PIN_SLP(gpm3-4, OUT0, DOWN);
+		PIN_SLP(gpm3-5, PREV, NONE);
+		PIN_SLP(gpm3-6, PREV, NONE);
+		PIN_SLP(gpm3-7, OUT0, NONE);
+
+		PIN_SLP(gpm4-0, INPUT, NONE);
+		PIN_SLP(gpm4-1, INPUT, NONE);
+		PIN_SLP(gpm4-2, INPUT, DOWN);
+		PIN_SLP(gpm4-3, INPUT, DOWN);
+		PIN_SLP(gpm4-4, PREV, NONE);
+		PIN_SLP(gpm4-5, OUT0, NONE);
+		PIN_SLP(gpm4-6, OUT0, NONE);
+		PIN_SLP(gpm4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy0-0, INPUT, DOWN);
+		PIN_SLP(gpy0-1, INPUT, DOWN);
+		PIN_SLP(gpy0-2, INPUT, NONE);
+		PIN_SLP(gpy0-3, INPUT, NONE);
+		PIN_SLP(gpy0-4, INPUT, NONE);
+		PIN_SLP(gpy0-5, INPUT, NONE);
+
+		PIN_SLP(gpy1-0, INPUT, DOWN);
+		PIN_SLP(gpy1-1, INPUT, DOWN);
+		PIN_SLP(gpy1-2, INPUT, DOWN);
+		PIN_SLP(gpy1-3, INPUT, DOWN);
+
+		PIN_SLP(gpy2-0, PREV, NONE);
+		PIN_SLP(gpy2-1, INPUT, DOWN);
+		PIN_SLP(gpy2-2, INPUT, NONE);
+		PIN_SLP(gpy2-3, INPUT, NONE);
+		PIN_SLP(gpy2-4, INPUT, NONE);
+		PIN_SLP(gpy2-5, INPUT, NONE);
+
+		PIN_SLP(gpy3-0, INPUT, DOWN);
+		PIN_SLP(gpy3-1, INPUT, DOWN);
+		PIN_SLP(gpy3-2, INPUT, DOWN);
+		PIN_SLP(gpy3-3, INPUT, DOWN);
+		PIN_SLP(gpy3-4, INPUT, DOWN);
+		PIN_SLP(gpy3-5, INPUT, DOWN);
+		PIN_SLP(gpy3-6, INPUT, DOWN);
+		PIN_SLP(gpy3-7, INPUT, DOWN);
+
+		PIN_SLP(gpy4-0, INPUT, DOWN);
+		PIN_SLP(gpy4-1, INPUT, DOWN);
+		PIN_SLP(gpy4-2, INPUT, DOWN);
+		PIN_SLP(gpy4-3, INPUT, DOWN);
+		PIN_SLP(gpy4-4, INPUT, DOWN);
+		PIN_SLP(gpy4-5, INPUT, DOWN);
+		PIN_SLP(gpy4-6, INPUT, DOWN);
+		PIN_SLP(gpy4-7, INPUT, DOWN);
+
+		PIN_SLP(gpy5-0, INPUT, DOWN);
+		PIN_SLP(gpy5-1, INPUT, DOWN);
+		PIN_SLP(gpy5-2, INPUT, DOWN);
+		PIN_SLP(gpy5-3, INPUT, DOWN);
+		PIN_SLP(gpy5-4, INPUT, DOWN);
+		PIN_SLP(gpy5-5, INPUT, DOWN);
+		PIN_SLP(gpy5-6, INPUT, DOWN);
+		PIN_SLP(gpy5-7, INPUT, DOWN);
+
+		PIN_SLP(gpy6-0, INPUT, DOWN);
+		PIN_SLP(gpy6-1, INPUT, DOWN);
+		PIN_SLP(gpy6-2, INPUT, DOWN);
+		PIN_SLP(gpy6-3, INPUT, DOWN);
+		PIN_SLP(gpy6-4, INPUT, DOWN);
+		PIN_SLP(gpy6-5, INPUT, DOWN);
+		PIN_SLP(gpy6-6, INPUT, DOWN);
+		PIN_SLP(gpy6-7, INPUT, DOWN);
+	};
+};
+
+&pinctrl_2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep2>;
+
+	sleep2: sleep-state {
+		PIN_SLP(gpz-0, INPUT, DOWN);
+		PIN_SLP(gpz-1, INPUT, DOWN);
+		PIN_SLP(gpz-2, INPUT, DOWN);
+		PIN_SLP(gpz-3, INPUT, DOWN);
+		PIN_SLP(gpz-4, INPUT, DOWN);
+		PIN_SLP(gpz-5, INPUT, DOWN);
+		PIN_SLP(gpz-6, INPUT, DOWN);
+	};
+};
+
+&pinctrl_3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep3>;
+
+	sleep3: sleep-state {
+		PIN_SLP(gpv0-0, INPUT, DOWN);
+		PIN_SLP(gpv0-1, INPUT, DOWN);
+		PIN_SLP(gpv0-2, INPUT, DOWN);
+		PIN_SLP(gpv0-3, INPUT, DOWN);
+		PIN_SLP(gpv0-4, INPUT, DOWN);
+		PIN_SLP(gpv0-5, INPUT, DOWN);
+		PIN_SLP(gpv0-6, INPUT, DOWN);
+		PIN_SLP(gpv0-7, INPUT, DOWN);
+
+		PIN_SLP(gpv1-0, INPUT, DOWN);
+		PIN_SLP(gpv1-1, INPUT, DOWN);
+		PIN_SLP(gpv1-2, INPUT, DOWN);
+		PIN_SLP(gpv1-3, INPUT, DOWN);
+		PIN_SLP(gpv1-4, INPUT, DOWN);
+		PIN_SLP(gpv1-5, INPUT, DOWN);
+		PIN_SLP(gpv1-6, INPUT, DOWN);
+		PIN_SLP(gpv1-7, INPUT, DOWN);
+
+		PIN_SLP(gpv2-0, INPUT, DOWN);
+		PIN_SLP(gpv2-1, INPUT, DOWN);
+		PIN_SLP(gpv2-2, INPUT, DOWN);
+		PIN_SLP(gpv2-3, INPUT, DOWN);
+		PIN_SLP(gpv2-4, INPUT, DOWN);
+		PIN_SLP(gpv2-5, INPUT, DOWN);
+		PIN_SLP(gpv2-6, INPUT, DOWN);
+		PIN_SLP(gpv2-7, INPUT, DOWN);
+
+		PIN_SLP(gpv3-0, INPUT, DOWN);
+		PIN_SLP(gpv3-1, INPUT, DOWN);
+		PIN_SLP(gpv3-2, INPUT, DOWN);
+		PIN_SLP(gpv3-3, INPUT, DOWN);
+		PIN_SLP(gpv3-4, INPUT, DOWN);
+		PIN_SLP(gpv3-5, INPUT, DOWN);
+		PIN_SLP(gpv3-6, INPUT, DOWN);
+		PIN_SLP(gpv3-7, INPUT, DOWN);
+
+		PIN_SLP(gpv4-0, INPUT, DOWN);
+		PIN_SLP(gpv4-1, INPUT, DOWN);
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_XUSBXTI>;
+};
+
+&pwm {
+	pinctrl-0 = <&pwm1_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <1>;
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+	status = "okay";
+};
+
+&sdhci_2 {
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sdhci2_cd>;
+	pinctrl-names = "default";
+	vmmc-supply = <&ldo21_reg>;
+	status = "okay";
+};
+
+&sdhci_3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_wifi>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	pinctrl-0 = <&uart0_data &uart0_fctl>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		pinctrl-0 = <&bt_shutdown &bt_device_wakeup &bt_host_wakeup>;
+		pinctrl-names = "default";
+
+		max-speed = <2000000>;
+		shutdown-gpios = <&gpl0 6 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "lpo";
+	};
+};
+
+&serial_2 {
+	pinctrl-0 = <&uart_sel>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4412-pinctrl.dtsi b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
new file mode 100644
index 000000000000..8ab31c3daa48
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-pinctrl.dtsi
@@ -0,0 +1,979 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung's Exynos4412 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ */
+
+#include "exynos-pinctrl.h"
+
+#define PIN_SLP(_pin, _mode, _pull)					\
+	pin- ## _pin {							\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_ ##_pull>;	\
+	}
+
+&pinctrl_0 {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb: gpb-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_a: uart-audio-a-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart_audio_b: uart-audio-b-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpb-0", "gpb-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpb-2", "gpb-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus-pins {
+		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+				"gpc0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+				"gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus-pins {
+		samsung,pins = "gpc1-0", "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpd0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ctrl: lcd-ctrl-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	mipi0_clk: mipi0-clk-pins {
+		samsung,pins = "gpd1-0", "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	mipi1_clk: mipi1-clk-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_clk: lcd-clk-pins {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data16: lcd-data-width16-pins {
+		samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
+				"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
+				"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data18: lcd-data-width18-pins {
+		samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
+				"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
+				"gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_data24: lcd-data-width24-pins {
+		samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
+				"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
+				"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
+				"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
+				"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
+				"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_ldi: lcd-ldi-pins {
+		samsung,pins = "gpf3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_io: cam-port-a-io-pins {
+		samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+				"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+				"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a_clk_active: cam-port-a-clk-active-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_a_clk_idle: cam-port-a-clk-idle-pins {
+		samsung,pins = "gpj1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl0: gpl0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl1: gpl1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpl2: gpl2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx1: gpx1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpx2: gpx2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd-pins {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_clk: sd4-clk-pins {
+		samsung,pins = "gpk0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cmd: sd4-cmd-pins {
+		samsung,pins = "gpk0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_cd: sd4-cd-pins {
+		samsung,pins = "gpk0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus1: sd4-bus-width1-pins {
+		samsung,pins = "gpk0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus4: sd4-bus-width4-pins {
+		samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd4_bus8: sd4-bus-width8-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpk1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpk1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd-pins {
+		samsung,pins = "gpk1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpk1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpk2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpk2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpk2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpk2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8-pins {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk-pins {
+		samsung,pins = "gpk3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd-pins {
+		samsung,pins = "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd-pins {
+		samsung,pins = "gpk3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1-pins {
+		samsung,pins = "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4-pins {
+		samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_io: cam-port-b-io-pins {
+		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_b_clk_active: cam-port-b-clk-active-pins {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	cam_port_b_clk_idle: cam-port-b-clk-idle-pins {
+		samsung,pins = "gpm2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint0: ext-int0-pins {
+		samsung,pins = "gpx0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint8: ext-int8-pins {
+		samsung,pins = "gpx1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint15: ext-int15-pins {
+		samsung,pins = "gpx1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint16: ext-int16-pins {
+		samsung,pins = "gpx2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	eint31: ext-int31-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c0: fimc-is-i2c0-pins {
+		samsung,pins = "gpm4-0", "gpm4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_i2c1: fimc-is-i2c1-pins {
+		samsung,pins = "gpm4-2", "gpm4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fimc_is_uart: fimc-is-uart-pins {
+		samsung,pins = "gpm3-5", "gpm3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec-pins {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpz: gpz-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm0_bus: pcm0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	c2c_bus: c2c-bus-pins {
+		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+				"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+				"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+				"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
+				"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+				"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+				"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+				"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
+				"gpv4-0", "gpv4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
new file mode 100644
index 000000000000..7f187a3dedcc
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-ppmu-common.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device tree sources for Exynos4412 PPMU common device tree
+ *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ */
+
+&ppmu_dmc0 {
+	status = "okay";
+
+	events {
+		ppmu_dmc0_3: ppmu-event3-dmc0 {
+			event-name = "ppmu-event3-dmc0";
+		};
+	};
+};
+
+&ppmu_dmc1 {
+	status = "okay";
+
+	events {
+		ppmu_dmc1_3: ppmu-event3-dmc1 {
+			event-name = "ppmu-event3-dmc1";
+		};
+	};
+};
+
+&ppmu_leftbus {
+	status = "okay";
+
+	events {
+		ppmu_leftbus_3: ppmu-event3-leftbus {
+			event-name = "ppmu-event3-leftbus";
+		};
+	};
+};
+
+&ppmu_rightbus {
+	status = "okay";
+
+	events {
+		ppmu_rightbus_3: ppmu-event3-rightbus {
+			event-name = "ppmu-event3-rightbus";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-prime.dtsi b/arch/arm/boot/dts/exynos4412-prime.dtsi
new file mode 100644
index 000000000000..3731a225f779
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-prime.dtsi
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4412 Prime SoC device tree source
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/*
+ * Exynos4412 Prime SoC revision supports higher CPU frequencies than
+ * non-Prime version.  Therefore we need to update OPPs table and
+ * thermal maps accordingly.
+ */
+
+&cpu0_opp_1500 {
+	/delete-property/turbo-mode;
+};
+
+&cpu0_opp_table {
+	opp-1600000000 {
+		opp-hz = /bits/ 64 <1600000000>;
+		opp-microvolt = <1350000>;
+		clock-latency-ns = <200000>;
+	};
+	opp-1704000000 {
+		opp-hz = /bits/ 64 <1704000000>;
+		opp-microvolt = <1350000>;
+		clock-latency-ns = <200000>;
+	};
+};
+
+&cooling_map0 {
+	cooling-device = <&cpu0 9 9>, <&cpu1 9 9>,
+			 <&cpu2 9 9>, <&cpu3 9 9>;
+};
+
+&cooling_map1 {
+	cooling-device = <&cpu0 15 15>, <&cpu1 15 15>,
+			 <&cpu2 15 15>, <&cpu3 15 15>;
+};
+
+&gpu_opp_table {
+	opp-533000000 {
+		opp-hz = /bits/ 64 <533000000>;
+		opp-microvolt = <1075000>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos4412-smdk4412.dts b/arch/arm/boot/dts/exynos4412-smdk4412.dts
index c2421df1fa43..715dfcba1417 100644
--- a/arch/arm/boot/dts/exynos4412-smdk4412.dts
+++ b/arch/arm/boot/dts/exynos4412-smdk4412.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4412 based SMDK board device tree source
  *
@@ -6,26 +7,28 @@
  *
  * Device tree source file for Samsung's SMDK4412 board which is based on
  * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	model = "Samsung SMDK evaluation board based on Exynos4412";
 	compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
-		bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
-		stdout-path = &serial_1;
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial1:115200n8";
 	};
 
 	fixed-rate-clocks {
@@ -38,106 +41,123 @@
 			compatible = "samsung,clock-xusbxti";
 			clock-frequency = <24000000>;
 		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
 	};
 };
 
-&g2d {
-	status = "okay";
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
 };
 
 &keypad {
 	samsung,keypad-num-rows = <3>;
 	samsung,keypad-num-columns = <8>;
 	linux,keypad-no-autorepeat;
-	linux,keypad-wakeup;
+	wakeup-source;
 	pinctrl-0 = <&keypad_rows &keypad_cols>;
 	pinctrl-names = "default";
 	status = "okay";
 
-	key_1 {
+	key-1 {
 		keypad,row = <1>;
 		keypad,column = <3>;
 		linux,code = <2>;
 	};
 
-	key_2 {
+	key-2 {
 		keypad,row = <1>;
 		keypad,column = <4>;
 		linux,code = <3>;
 	};
 
-	key_3 {
+	key-3 {
 		keypad,row = <1>;
 		keypad,column = <5>;
 		linux,code = <4>;
 	};
 
-	key_4 {
+	key-4 {
 		keypad,row = <1>;
 		keypad,column = <6>;
 		linux,code = <5>;
 	};
 
-	key_5 {
+	key-5 {
 		keypad,row = <1>;
 		keypad,column = <7>;
 		linux,code = <6>;
 	};
 
-	key_A {
+	key-A {
 		keypad,row = <2>;
 		keypad,column = <6>;
 		linux,code = <30>;
 	};
 
-	key_B {
+	key-B {
 		keypad,row = <2>;
 		keypad,column = <7>;
 		linux,code = <48>;
 	};
 
-	key_C {
+	key-C {
 		keypad,row = <0>;
 		keypad,column = <5>;
 		linux,code = <46>;
 	};
 
-	key_D {
+	key-D {
 		keypad,row = <2>;
 		keypad,column = <5>;
 		linux,code = <32>;
 	};
 
-	key_E {
+	key-E {
 		keypad,row = <0>;
 		keypad,column = <7>;
 		linux,code = <18>;
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-	status = "okay";
-};
-
 &pinctrl_1 {
-	keypad_rows: keypad-rows {
+	keypad_rows: keypad-rows-pins {
 		samsung,pins = "gpx2-0", "gpx2-1", "gpx2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	keypad_cols: keypad-cols {
+	keypad_cols: keypad-cols-pins {
 		samsung,pins = "gpx1-0", "gpx1-1", "gpx1-2", "gpx1-3",
 			       "gpx1-4", "gpx1-5", "gpx1-6", "gpx1-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
+&rtc {
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sdhci_2 {
 	bus-width = <4>;
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &sd2_cd>;
diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts
index 525684ca8dc0..5a2dcdc5c28b 100644
--- a/arch/arm/boot/dts/exynos4412-tiny4412.dts
+++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * FriendlyARM's Exynos4412 based TINY4412 board device tree source
  *
@@ -5,24 +6,27 @@
  *
  * Device tree source file for FriendlyARM's TINY4412 board which is based on
  * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "FriendlyARM TINY4412 board based on Exynos4412";
 	compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		mmc0 = &sdhci_2;
+	};
+
 	chosen {
 		stdout-path = &serial_0;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x40000000>;
 	};
 
@@ -31,26 +35,28 @@
 
 		led1 {
 			label = "led1";
-			gpios = <&gpm4 0 1>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpm4 0 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "heartbeat";
 		};
 
 		led2 {
 			label = "led2";
-			gpios = <&gpm4 1 1>;
+			gpios = <&gpm4 1 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led3 {
 			label = "led3";
-			gpios = <&gpm4 2 1>;
+			gpios = <&gpm4 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
 		led4 {
 			label = "led4";
-			gpios = <&gpm4 3 1>;
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			gpios = <&gpm4 3 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 			linux,default-trigger = "mmc0";
 		};
@@ -66,11 +72,68 @@
 			compatible = "samsung,clock-xusbxti";
 			clock-frequency = <24000000>;
 		};
+
+		pmic_ap_clk: pmic-ap-clk {
+			/* Workaround for missing clock on PMIC */
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+
+	panel {
+		compatible = "innolux,at070tn92";
+		power-supply = <&vddq_lcd>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lcdc_output>;
+			};
+		};
+	};
+
+	vddq_lcd: regulator-vddq-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "vddq-lcd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&cpu_thermal {
+	cooling-maps {
+		cooling_map0: map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 7 7>, <&cpu1 7 7>,
+					 <&cpu2 7 7>, <&cpu3 7 7>;
+		};
+		cooling_map1: map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 13 13>, <&cpu1 13 13>,
+					 <&cpu2 13 13>, <&cpu3 13 13>;
+		};
+	};
+};
+
+&fimd {
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@3 {
+		reg = <3>;
+		lcdc_output: endpoint {
+			remote-endpoint = <&panel_input>;
+		};
 	};
 };
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &sdhci_2 {
diff --git a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
deleted file mode 100644
index e3f7934d19d0..000000000000
--- a/arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Device tree sources for Exynos4412 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <8>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <55>;
-samsung,tmu_min_efuse_value = <40>;
-samsung,tmu_max_efuse_value = <100>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <85>;
-samsung,tmu_default_temp_offset = <50>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index afc199d78cb9..3c2d2a7836da 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4412 based Trats 2 board device tree source
  *
@@ -6,1310 +7,23 @@
  *
  * Device tree source file for Samsung's Trats 2 board which is based on
  * Samsung's Exynos4412 SoC.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
-#include "exynos4412.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/clock/maxim,max77686.h>
+#include "exynos4412-galaxy-s3.dtsi"
 
 / {
 	model = "Samsung Trats 2 based on Exynos4412";
-	compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
-
-	aliases {
-		i2c9 = &i2c_ak8975;
-		i2c10 = &i2c_cm36651;
-		i2c11 = &i2c_max77693;
-		i2c12 = &i2c_max77693_fuel;
-	};
+	compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
+	chassis-type = "handset";
 
-	memory {
-		reg =  <0x40000000 0x40000000>;
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
 	};
 
 	chosen {
-		bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
-		stdout-path = &serial_2;
-	};
-
-	firmware@0204F000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x0204F000 0x1000>;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti", "fixed-clock";
-			clock-frequency = <0>;
-		};
-
-		xusbxti {
-			compatible = "samsung,clock-xusbxti", "fixed-clock";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cam_io_reg: voltage-regulator-1 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_SENSOR_A";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 2 0>;
-			enable-active-high;
-		};
-
-		lcd_vdd3_reg: voltage-regulator-2 {
-			compatible = "regulator-fixed";
-			regulator-name = "LCD_VDD_2.2V";
-			regulator-min-microvolt = <2200000>;
-			regulator-max-microvolt = <2200000>;
-			gpio = <&gpc0 1 0>;
-			enable-active-high;
-		};
-
-		cam_af_reg: voltage-regulator-3 {
-			compatible = "regulator-fixed";
-			regulator-name = "CAM_AF";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpm0 4 0>;
-			enable-active-high;
-		};
-
-		ps_als_reg: voltage-regulator-5 {
-			compatible = "regulator-fixed";
-			regulator-name = "LED_A_3.0V";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			gpio = <&gpj0 5 0>;
-			enable-active-high;
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		key-down {
-			gpios = <&gpx3 3 1>;
-			linux,code = <114>;
-			label = "volume down";
-			debounce-interval = <10>;
-		};
-
-		key-up {
-			gpios = <&gpx2 2 1>;
-			linux,code = <115>;
-			label = "volume up";
-			debounce-interval = <10>;
-		};
-
-		key-power {
-			gpios = <&gpx2 7 1>;
-			linux,code = <116>;
-			label = "power";
-			debounce-interval = <10>;
-			gpio-key,wakeup;
-		};
-
-		key-ok {
-			gpios = <&gpx0 1 1>;
-			linux,code = <139>;
-			label = "ok";
-			debounce-inteval = <10>;
-			gpio-key,wakeup;
-		};
-	};
-
-	i2c_max77693: i2c-gpio-1 {
-		compatible = "i2c-gpio";
-		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		max77693@66 {
-			compatible = "maxim,max77693";
-			interrupt-parent = <&gpx1>;
-			interrupts = <5 2>;
-			reg = <0x66>;
-
-			regulators {
-				esafeout1_reg: ESAFEOUT1@1 {
-					regulator-name = "ESAFEOUT1";
-				};
-				esafeout2_reg: ESAFEOUT2@2 {
-					regulator-name = "ESAFEOUT2";
-				};
-				charger_reg: CHARGER@0 {
-					regulator-name = "CHARGER";
-					regulator-min-microamp = <60000>;
-					regulator-max-microamp = <2580000>;
-				};
-			};
-
-			max77693_haptic {
-				compatible = "maxim,max77693-haptic";
-				haptic-supply = <&ldo26_reg>;
-				pwms = <&pwm 0 38022 0>;
-			};
-
-			charger {
-				compatible = "maxim,max77693-charger";
-
-				maxim,constant-microvolt = <4350000>;
-				maxim,min-system-microvolt = <3600000>;
-				maxim,thermal-regulation-celsius = <100>;
-				maxim,battery-overcurrent-microamp = <3500000>;
-				maxim,charge-input-threshold-microvolt = <4300000>;
-			};
-		};
-	};
-
-	i2c_max77693_fuel: i2c-gpio-3 {
-		compatible = "i2c-gpio";
-		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		max77693-fuel-gauge@36 {
-			compatible = "maxim,max17047";
-			interrupt-parent = <&gpx2>;
-			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
-			reg = <0x36>;
-		};
-	};
-
-	i2c_ak8975: i2c-gpio-0 {
-		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 0>, <&gpy2 5 0>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "okay";
-
-		ak8975@0c {
-			compatible = "asahi-kasei,ak8975";
-			reg = <0x0c>;
-			gpios = <&gpj0 7 0>;
-		};
-	};
-
-	i2c_cm36651: i2c-gpio-2 {
-		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
-		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cm36651@18 {
-			compatible = "capella,cm36651";
-			reg = <0x18>;
-			interrupt-parent = <&gpx0>;
-			interrupts = <2 2>;
-			vled-supply = <&ps_als_reg>;
-		};
-	};
-
-	camera: camera {
-		pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
-		pinctrl-names = "default";
-		status = "okay";
-		assigned-clocks = <&clock CLK_MOUT_CAM0>,
-				  <&clock CLK_MOUT_CAM1>;
-		assigned-clock-parents = <&clock CLK_XUSBXTI>,
-					 <&clock CLK_XUSBXTI>;
-
-
-	};
-
-	sound {
-		compatible = "samsung,trats2-audio";
-		samsung,i2s-controller = <&i2s0>;
-		samsung,model = "Trats2";
-		samsung,audio-codec = <&wm1811>;
-		samsung,audio-routing =
-			"SPK", "SPKOUTLN",
-			"SPK", "SPKOUTLP",
-			"SPK", "SPKOUTRN",
-			"SPK", "SPKOUTRP";
-	};
-
-	thermistor-ap@0 {
-		compatible = "ntc,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 1>;  /* AP temperature */
-	};
-
-	thermistor-battery@1 {
-		compatible = "ntc,ncp15wb473";
-		pullup-uv = <1800000>;	 /* VCC_1.8V_AP */
-		pullup-ohm = <100000>;	 /* 100K */
-		pulldown-ohm = <100000>; /* 100K */
-		io-channels = <&adc 2>;  /* Battery temperature */
-	};
-
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 7 7>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 13 13>;
-			       };
-		       };
-		};
-	};
-};
-
-&adc {
-	vdd-supply = <&ldo3_reg>;
-	status = "okay";
-};
-
-&csis_0 {
-	status = "okay";
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	assigned-clocks = <&clock CLK_MOUT_CSIS0>,
-			<&clock CLK_SCLK_CSIS0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-
-	/* Camera C (3) MIPI CSI-2 (CSIS0) */
-	port@3 {
-		reg = <3>;
-		csis0_ep: endpoint {
-			remote-endpoint = <&s5c73m3_ep>;
-			data-lanes = <1 2 3 4>;
-			samsung,csis-hs-settle = <12>;
-		};
-	};
-};
-
-&csis_1 {
-	status = "okay";
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	assigned-clocks = <&clock CLK_MOUT_CSIS1>,
-			<&clock CLK_SCLK_CSIS1>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-
-	/* Camera D (4) MIPI CSI-2 (CSIS1) */
-	port@4 {
-		reg = <4>;
-		csis1_ep: endpoint {
-			remote-endpoint = <&is_s5k6a3_ep>;
-			data-lanes = <1>;
-			samsung,csis-hs-settle = <18>;
-			samsung,csis-wclk;
-		};
-	};
-};
-
-&dsi_0 {
-	vddcore-supply = <&ldo8_reg>;
-	vddio-supply = <&ldo10_reg>;
-	samsung,pll-clock-frequency = <24000000>;
-	status = "okay";
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			dsi_out: endpoint {
-				remote-endpoint = <&dsi_in>;
-				samsung,burst-clock-frequency = <500000000>;
-				samsung,esc-clock-frequency = <20000000>;
-			};
-		};
-	};
-
-	panel@0 {
-		compatible = "samsung,s6e8aa0";
-		reg = <0>;
-		vdd3-supply = <&lcd_vdd3_reg>;
-		vci-supply = <&ldo25_reg>;
-		reset-gpios = <&gpy4 5 0>;
-		power-on-delay= <50>;
-		reset-delay = <100>;
-		init-delay = <100>;
-		flip-horizontal;
-		flip-vertical;
-		panel-width-mm = <58>;
-		panel-height-mm = <103>;
-
-		display-timings {
-			timing-0 {
-				clock-frequency = <57153600>;
-				hactive = <720>;
-				vactive = <1280>;
-				hfront-porch = <5>;
-				hback-porch = <5>;
-				hsync-len = <5>;
-				vfront-porch = <13>;
-				vback-porch = <1>;
-				vsync-len = <2>;
-			};
-		};
-
-		port {
-			dsi_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&exynos_usbphy {
-	status = "okay";
-};
-
-&fimc_0 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC0>,
-			<&clock CLK_SCLK_FIMC0>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_1 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC1>,
-			<&clock CLK_SCLK_FIMC1>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_2 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC2>,
-			<&clock CLK_SCLK_FIMC2>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_3 {
-	status = "okay";
-	assigned-clocks = <&clock CLK_MOUT_FIMC3>,
-			<&clock CLK_SCLK_FIMC3>;
-	assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
-	assigned-clock-rates = <0>, <176000000>;
-};
-
-&fimc_is {
-	pinctrl-0 = <&fimc_is_uart>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	i2c1_isp: i2c-isp@12140000 {
-		pinctrl-0 = <&fimc_is_i2c1>;
-		pinctrl-names = "default";
-
-		s5k6a3@10 {
-			compatible = "samsung,s5k6a3";
-			reg = <0x10>;
-			svdda-supply = <&cam_io_reg>;
-			svddio-supply = <&ldo19_reg>;
-			afvdd-supply = <&ldo19_reg>;
-			clock-frequency = <24000000>;
-			/* CAM_B_CLKOUT */
-			clocks = <&camera 1>;
-			clock-names = "extclk";
-			samsung,camclk-out = <1>;
-			gpios = <&gpm1 6 0>;
-
-			port {
-				is_s5k6a3_ep: endpoint {
-					remote-endpoint = <&csis1_ep>;
-					data-lanes = <1>;
-				};
-			};
-		};
-	};
-};
-
-&fimc_lite_0 {
-	status = "okay";
-};
-
-&fimc_lite_1 {
-	status = "okay";
-};
-
-&fimd {
-	status = "okay";
-};
-
-&hsotg {
-	vusb_d-supply = <&ldo15_reg>;
-	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&i2c_0 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	s5c73m3@3c {
-		compatible = "samsung,s5c73m3";
-		reg = <0x3c>;
-		standby-gpios = <&gpm0 1 1>;   /* ISP_STANDBY */
-		xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */
-		vdd-int-supply = <&buck9_reg>;
-		vddio-cis-supply = <&ldo9_reg>;
-		vdda-supply = <&ldo17_reg>;
-		vddio-host-supply = <&ldo18_reg>;
-		vdd-af-supply = <&cam_af_reg>;
-		vdd-reg-supply = <&cam_io_reg>;
-		clock-frequency = <24000000>;
-		/* CAM_A_CLKOUT */
-		clocks = <&camera 0>;
-		clock-names = "cis_extclk";
-		port {
-			s5c73m3_ep: endpoint {
-				remote-endpoint = <&csis0_ep>;
-				data-lanes = <1 2 3 4>;
-			};
-		};
-	};
-};
-
-&i2c_3 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <400000>;
-	pinctrl-0 = <&i2c3_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	mms114-touchscreen@48 {
-		compatible = "melfas,mms114";
-		reg = <0x48>;
-		interrupt-parent = <&gpm2>;
-		interrupts = <3 2>;
-		x-size = <720>;
-		y-size = <1280>;
-		avdd-supply = <&ldo23_reg>;
-		vdd-supply = <&ldo24_reg>;
-	};
-};
-
-&i2c_4 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c4_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	wm1811: wm1811@1a {
-		compatible = "wlf,wm1811";
-		reg = <0x1a>;
-		clocks = <&pmu_system_controller 0>;
-		clock-names = "MCLK1";
-		DCVDD-supply = <&ldo3_reg>;
-		DBVDD1-supply = <&ldo3_reg>;
-		wlf,ldo1ena = <&gpj0 4 0>;
-	};
-};
-
-&i2c_7 {
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-slave-addr = <0x10>;
-	samsung,i2c-max-bus-freq = <100000>;
-	pinctrl-0 = <&i2c7_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	max77686: max77686_pmic@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 0>;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: ldo1 {
-				regulator-compatible = "LDO1";
-				regulator-name = "VALIVE_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: ldo2 {
-				regulator-compatible = "LDO2";
-				regulator-name = "VM1M2_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo3_reg: ldo3 {
-				regulator-compatible = "LDO3";
-				regulator-name = "VCC_1.8V_AP";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo4_reg: ldo4 {
-				regulator-compatible = "LDO4";
-				regulator-name = "VCC_2.8V_AP";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: ldo5 {
-				regulator-compatible = "LDO5";
-				regulator-name = "VCC_1.8V_IO";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: ldo6 {
-				regulator-compatible = "LDO6";
-				regulator-name = "VMPLL_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo7_reg: ldo7 {
-				regulator-compatible = "LDO7";
-				regulator-name = "VPLL_1.0V_AP";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo8_reg: ldo8 {
-				regulator-compatible = "LDO8";
-				regulator-name = "VMIPI_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo9_reg: ldo9 {
-				regulator-compatible = "LDO9";
-				regulator-name = "CAM_ISP_MIPI_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo10_reg: ldo10 {
-				regulator-compatible = "LDO10";
-				regulator-name = "VMIPI_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo11_reg: ldo11 {
-				regulator-compatible = "LDO11";
-				regulator-name = "VABB1_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo12_reg: ldo12 {
-				regulator-compatible = "LDO12";
-				regulator-name = "VUOTG_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo13_reg: ldo13 {
-				regulator-compatible = "LDO13";
-				regulator-name = "NFC_AVDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo14_reg: ldo14 {
-				regulator-compatible = "LDO14";
-				regulator-name = "VABB2_1.95V";
-				regulator-min-microvolt = <1950000>;
-				regulator-max-microvolt = <1950000>;
-				regulator-always-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			ldo15_reg: ldo15 {
-				regulator-compatible = "LDO15";
-				regulator-name = "VHSIC_1.0V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo16_reg: ldo16 {
-				regulator-compatible = "LDO16";
-				regulator-name = "VHSIC_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			ldo17_reg: ldo17 {
-				regulator-compatible = "LDO17";
-				regulator-name = "CAM_SENSOR_CORE_1.2V";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-			};
-
-			ldo18_reg: ldo18 {
-				regulator-compatible = "LDO18";
-				regulator-name = "CAM_ISP_SEN_IO_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo19_reg: ldo19 {
-				regulator-compatible = "LDO19";
-				regulator-name = "VT_CAM_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo20_reg: ldo20 {
-				regulator-compatible = "LDO20";
-				regulator-name = "VDDQ_PRE_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo21_reg: ldo21 {
-				regulator-compatible = "LDO21";
-				regulator-name = "VTF_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo22_reg: ldo22 {
-				regulator-compatible = "LDO22";
-				regulator-name = "VMEM_VDD_2.8V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			ldo23_reg: ldo23 {
-				regulator-compatible = "LDO23";
-				regulator-name = "TSP_AVDD_3.3V";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-			};
-
-			ldo24_reg: ldo24 {
-				regulator-compatible = "LDO24";
-				regulator-name = "TSP_VDD_1.8V";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-			};
-
-			ldo25_reg: ldo25 {
-				regulator-compatible = "LDO25";
-				regulator-name = "LCD_VCC_3.3V";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-			};
-
-			ldo26_reg: ldo26 {
-				regulator-compatible = "LDO26";
-				regulator-name = "MOTOR_VCC_3.0V";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-			};
-
-			buck1_reg: buck1 {
-				regulator-compatible = "BUCK1";
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck2_reg: buck2 {
-				regulator-compatible = "BUCK2";
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			buck3_reg: buck3 {
-				regulator-compatible = "BUCK3";
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck4_reg: buck4 {
-				regulator-compatible = "BUCK4";
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-boot-on;
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			buck5_reg: buck5 {
-				regulator-compatible = "BUCK5";
-				regulator-name = "VMEM_1.2V_AP";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			buck6_reg: buck6 {
-				regulator-compatible = "BUCK6";
-				regulator-name = "VCC_SUB_1.35V";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: buck7 {
-				regulator-compatible = "BUCK7";
-				regulator-name = "VCC_SUB_2.0V";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: buck8 {
-				regulator-compatible = "BUCK8";
-				regulator-name = "VMEM_VDDF_3.0V";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
-			};
-
-			buck9_reg: buck9 {
-				regulator-compatible = "BUCK9";
-				regulator-name = "CAM_ISP_CORE_1.2V";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1200000>;
-				maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
-			};
-		};
+		bootargs = "root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+		stdout-path = "serial2:115200n8";
 	};
 };
-
-&i2s0 {
-	pinctrl-0 = <&i2s0_bus>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&mshc_0 {
-	num-slots = <1>;
-	broken-cd;
-	non-removable;
-	card-detect-delay = <200>;
-	vmmc-supply = <&ldo22_reg>;
-	clock-frequency = <400000000>;
-	samsung,dw-mshc-ciu-div = <0>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>;
-	pinctrl-names = "default";
-	status = "okay";
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&pmu_system_controller {
-	assigned-clocks = <&pmu_system_controller 0>;
-	assigned-clock-parents =  <&clock CLK_XUSBXTI>;
-};
-
-&ppmu_dmc0 {
-	status = "okay";
-
-	events {
-		ppmu_dmc0_3: ppmu-event3-dmc0 {
-			event-name = "ppmu-event3-dmc0";
-		};
-	};
-};
-
-&ppmu_dmc1 {
-	status = "okay";
-
-	events {
-		ppmu_dmc1_3: ppmu-event3-dmc1 {
-			event-name = "ppmu-event3-dmc1";
-		};
-	};
-};
-
-&ppmu_leftbus {
-	status = "okay";
-
-	events {
-		ppmu_leftbus_3: ppmu-event3-leftbus {
-			event-name = "ppmu-event3-leftbus";
-		};
-	};
-};
-
-&ppmu_rightbus {
-	status = "okay";
-
-	events {
-		ppmu_rightbus_3: ppmu-event3-rightbus {
-			event-name = "ppmu-event3-rightbus";
-		};
-	};
-};
-
-&pinctrl_0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep0>;
-
-	sleep0: sleep-states {
-		PIN_SLP(gpa0-0, INPUT, NONE);
-		PIN_SLP(gpa0-1, OUT0, NONE);
-		PIN_SLP(gpa0-2, INPUT, NONE);
-		PIN_SLP(gpa0-3, INPUT, UP);
-		PIN_SLP(gpa0-4, INPUT, NONE);
-		PIN_SLP(gpa0-5, INPUT, DOWN);
-		PIN_SLP(gpa0-6, INPUT, DOWN);
-		PIN_SLP(gpa0-7, INPUT, UP);
-
-		PIN_SLP(gpa1-0, INPUT, DOWN);
-		PIN_SLP(gpa1-1, INPUT, DOWN);
-		PIN_SLP(gpa1-2, INPUT, DOWN);
-		PIN_SLP(gpa1-3, INPUT, DOWN);
-		PIN_SLP(gpa1-4, INPUT, DOWN);
-		PIN_SLP(gpa1-5, INPUT, DOWN);
-
-		PIN_SLP(gpb-0, INPUT, NONE);
-		PIN_SLP(gpb-1, INPUT, NONE);
-		PIN_SLP(gpb-2, INPUT, NONE);
-		PIN_SLP(gpb-3, INPUT, NONE);
-		PIN_SLP(gpb-4, INPUT, DOWN);
-		PIN_SLP(gpb-5, INPUT, UP);
-		PIN_SLP(gpb-6, INPUT, DOWN);
-		PIN_SLP(gpb-7, INPUT, DOWN);
-
-		PIN_SLP(gpc0-0, INPUT, DOWN);
-		PIN_SLP(gpc0-1, INPUT, DOWN);
-		PIN_SLP(gpc0-2, INPUT, DOWN);
-		PIN_SLP(gpc0-3, INPUT, DOWN);
-		PIN_SLP(gpc0-4, INPUT, DOWN);
-
-		PIN_SLP(gpc1-0, INPUT, NONE);
-		PIN_SLP(gpc1-1, PREV, NONE);
-		PIN_SLP(gpc1-2, INPUT, NONE);
-		PIN_SLP(gpc1-3, INPUT, NONE);
-		PIN_SLP(gpc1-4, INPUT, NONE);
-
-		PIN_SLP(gpd0-0, INPUT, DOWN);
-		PIN_SLP(gpd0-1, INPUT, DOWN);
-		PIN_SLP(gpd0-2, INPUT, NONE);
-		PIN_SLP(gpd0-3, INPUT, NONE);
-
-		PIN_SLP(gpd1-0, INPUT, DOWN);
-		PIN_SLP(gpd1-1, INPUT, DOWN);
-		PIN_SLP(gpd1-2, INPUT, NONE);
-		PIN_SLP(gpd1-3, INPUT, NONE);
-
-		PIN_SLP(gpf0-0, INPUT, NONE);
-		PIN_SLP(gpf0-1, INPUT, NONE);
-		PIN_SLP(gpf0-2, INPUT, DOWN);
-		PIN_SLP(gpf0-3, INPUT, DOWN);
-		PIN_SLP(gpf0-4, INPUT, NONE);
-		PIN_SLP(gpf0-5, INPUT, DOWN);
-		PIN_SLP(gpf0-6, INPUT, NONE);
-		PIN_SLP(gpf0-7, INPUT, DOWN);
-
-		PIN_SLP(gpf1-0, INPUT, DOWN);
-		PIN_SLP(gpf1-1, INPUT, DOWN);
-		PIN_SLP(gpf1-2, INPUT, DOWN);
-		PIN_SLP(gpf1-3, INPUT, DOWN);
-		PIN_SLP(gpf1-4, INPUT, NONE);
-		PIN_SLP(gpf1-5, INPUT, NONE);
-		PIN_SLP(gpf1-6, INPUT, DOWN);
-		PIN_SLP(gpf1-7, PREV, NONE);
-
-		PIN_SLP(gpf2-0, PREV, NONE);
-		PIN_SLP(gpf2-1, INPUT, DOWN);
-		PIN_SLP(gpf2-2, INPUT, DOWN);
-		PIN_SLP(gpf2-3, INPUT, DOWN);
-		PIN_SLP(gpf2-4, INPUT, DOWN);
-		PIN_SLP(gpf2-5, INPUT, DOWN);
-		PIN_SLP(gpf2-6, INPUT, NONE);
-		PIN_SLP(gpf2-7, INPUT, NONE);
-
-		PIN_SLP(gpf3-0, INPUT, NONE);
-		PIN_SLP(gpf3-1, PREV, NONE);
-		PIN_SLP(gpf3-2, PREV, NONE);
-		PIN_SLP(gpf3-3, PREV, NONE);
-		PIN_SLP(gpf3-4, OUT1, NONE);
-		PIN_SLP(gpf3-5, INPUT, DOWN);
-
-		PIN_SLP(gpj0-0, PREV, NONE);
-		PIN_SLP(gpj0-1, PREV, NONE);
-		PIN_SLP(gpj0-2, PREV, NONE);
-		PIN_SLP(gpj0-3, INPUT, DOWN);
-		PIN_SLP(gpj0-4, PREV, NONE);
-		PIN_SLP(gpj0-5, PREV, NONE);
-		PIN_SLP(gpj0-6, INPUT, DOWN);
-		PIN_SLP(gpj0-7, INPUT, DOWN);
-
-		PIN_SLP(gpj1-0, INPUT, DOWN);
-		PIN_SLP(gpj1-1, PREV, NONE);
-		PIN_SLP(gpj1-2, PREV, NONE);
-		PIN_SLP(gpj1-3, INPUT, DOWN);
-		PIN_SLP(gpj1-4, INPUT, DOWN);
-	};
-};
-
-&pinctrl_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep1>;
-
-	sleep1: sleep-states {
-		PIN_SLP(gpk0-0, PREV, NONE);
-		PIN_SLP(gpk0-1, PREV, NONE);
-		PIN_SLP(gpk0-2, OUT0, NONE);
-		PIN_SLP(gpk0-3, PREV, NONE);
-		PIN_SLP(gpk0-4, PREV, NONE);
-		PIN_SLP(gpk0-5, PREV, NONE);
-		PIN_SLP(gpk0-6, PREV, NONE);
-
-		PIN_SLP(gpk1-0, INPUT, DOWN);
-		PIN_SLP(gpk1-1, INPUT, DOWN);
-		PIN_SLP(gpk1-2, INPUT, DOWN);
-		PIN_SLP(gpk1-3, PREV, NONE);
-		PIN_SLP(gpk1-4, PREV, NONE);
-		PIN_SLP(gpk1-5, PREV, NONE);
-		PIN_SLP(gpk1-6, PREV, NONE);
-
-		PIN_SLP(gpk2-0, INPUT, DOWN);
-		PIN_SLP(gpk2-1, INPUT, DOWN);
-		PIN_SLP(gpk2-2, INPUT, DOWN);
-		PIN_SLP(gpk2-3, INPUT, DOWN);
-		PIN_SLP(gpk2-4, INPUT, DOWN);
-		PIN_SLP(gpk2-5, INPUT, DOWN);
-		PIN_SLP(gpk2-6, INPUT, DOWN);
-
-		PIN_SLP(gpk3-0, OUT0, NONE);
-		PIN_SLP(gpk3-1, INPUT, NONE);
-		PIN_SLP(gpk3-2, INPUT, DOWN);
-		PIN_SLP(gpk3-3, INPUT, NONE);
-		PIN_SLP(gpk3-4, INPUT, NONE);
-		PIN_SLP(gpk3-5, INPUT, NONE);
-		PIN_SLP(gpk3-6, INPUT, NONE);
-
-		PIN_SLP(gpl0-0, INPUT, DOWN);
-		PIN_SLP(gpl0-1, INPUT, DOWN);
-		PIN_SLP(gpl0-2, INPUT, DOWN);
-		PIN_SLP(gpl0-3, INPUT, DOWN);
-		PIN_SLP(gpl0-4, PREV, NONE);
-		PIN_SLP(gpl0-6, PREV, NONE);
-
-		PIN_SLP(gpl1-0, INPUT, DOWN);
-		PIN_SLP(gpl1-1, INPUT, DOWN);
-		PIN_SLP(gpl2-0, INPUT, DOWN);
-		PIN_SLP(gpl2-1, INPUT, DOWN);
-		PIN_SLP(gpl2-2, INPUT, DOWN);
-		PIN_SLP(gpl2-3, INPUT, DOWN);
-		PIN_SLP(gpl2-4, INPUT, DOWN);
-		PIN_SLP(gpl2-5, INPUT, DOWN);
-		PIN_SLP(gpl2-6, PREV, NONE);
-		PIN_SLP(gpl2-7, INPUT, DOWN);
-
-		PIN_SLP(gpm0-0, INPUT, DOWN);
-		PIN_SLP(gpm0-1, INPUT, DOWN);
-		PIN_SLP(gpm0-2, INPUT, DOWN);
-		PIN_SLP(gpm0-3, INPUT, DOWN);
-		PIN_SLP(gpm0-4, INPUT, DOWN);
-		PIN_SLP(gpm0-5, INPUT, DOWN);
-		PIN_SLP(gpm0-6, INPUT, DOWN);
-		PIN_SLP(gpm0-7, INPUT, DOWN);
-
-		PIN_SLP(gpm1-0, INPUT, DOWN);
-		PIN_SLP(gpm1-1, INPUT, DOWN);
-		PIN_SLP(gpm1-2, INPUT, NONE);
-		PIN_SLP(gpm1-3, INPUT, NONE);
-		PIN_SLP(gpm1-4, INPUT, NONE);
-		PIN_SLP(gpm1-5, INPUT, NONE);
-		PIN_SLP(gpm1-6, INPUT, DOWN);
-
-		PIN_SLP(gpm2-0, INPUT, NONE);
-		PIN_SLP(gpm2-1, INPUT, NONE);
-		PIN_SLP(gpm2-2, INPUT, DOWN);
-		PIN_SLP(gpm2-3, INPUT, DOWN);
-		PIN_SLP(gpm2-4, INPUT, DOWN);
-
-		PIN_SLP(gpm3-0, PREV, NONE);
-		PIN_SLP(gpm3-1, PREV, NONE);
-		PIN_SLP(gpm3-2, PREV, NONE);
-		PIN_SLP(gpm3-3, OUT1, NONE);
-		PIN_SLP(gpm3-4, INPUT, DOWN);
-		PIN_SLP(gpm3-5, INPUT, DOWN);
-		PIN_SLP(gpm3-6, INPUT, DOWN);
-		PIN_SLP(gpm3-7, INPUT, DOWN);
-
-		PIN_SLP(gpm4-0, INPUT, DOWN);
-		PIN_SLP(gpm4-1, INPUT, DOWN);
-		PIN_SLP(gpm4-2, INPUT, DOWN);
-		PIN_SLP(gpm4-3, INPUT, DOWN);
-		PIN_SLP(gpm4-4, INPUT, DOWN);
-		PIN_SLP(gpm4-5, INPUT, DOWN);
-		PIN_SLP(gpm4-6, INPUT, DOWN);
-		PIN_SLP(gpm4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy0-0, INPUT, DOWN);
-		PIN_SLP(gpy0-1, INPUT, DOWN);
-		PIN_SLP(gpy0-2, INPUT, DOWN);
-		PIN_SLP(gpy0-3, INPUT, DOWN);
-		PIN_SLP(gpy0-4, INPUT, DOWN);
-		PIN_SLP(gpy0-5, INPUT, DOWN);
-
-		PIN_SLP(gpy1-0, INPUT, DOWN);
-		PIN_SLP(gpy1-1, INPUT, DOWN);
-		PIN_SLP(gpy1-2, INPUT, DOWN);
-		PIN_SLP(gpy1-3, INPUT, DOWN);
-
-		PIN_SLP(gpy2-0, PREV, NONE);
-		PIN_SLP(gpy2-1, INPUT, DOWN);
-		PIN_SLP(gpy2-2, INPUT, NONE);
-		PIN_SLP(gpy2-3, INPUT, NONE);
-		PIN_SLP(gpy2-4, INPUT, NONE);
-		PIN_SLP(gpy2-5, INPUT, NONE);
-
-		PIN_SLP(gpy3-0, INPUT, DOWN);
-		PIN_SLP(gpy3-1, INPUT, DOWN);
-		PIN_SLP(gpy3-2, INPUT, DOWN);
-		PIN_SLP(gpy3-3, INPUT, DOWN);
-		PIN_SLP(gpy3-4, INPUT, DOWN);
-		PIN_SLP(gpy3-5, INPUT, DOWN);
-		PIN_SLP(gpy3-6, INPUT, DOWN);
-		PIN_SLP(gpy3-7, INPUT, DOWN);
-
-		PIN_SLP(gpy4-0, INPUT, DOWN);
-		PIN_SLP(gpy4-1, INPUT, DOWN);
-		PIN_SLP(gpy4-2, INPUT, DOWN);
-		PIN_SLP(gpy4-3, INPUT, DOWN);
-		PIN_SLP(gpy4-4, INPUT, DOWN);
-		PIN_SLP(gpy4-5, INPUT, DOWN);
-		PIN_SLP(gpy4-6, INPUT, DOWN);
-		PIN_SLP(gpy4-7, INPUT, DOWN);
-
-		PIN_SLP(gpy5-0, INPUT, DOWN);
-		PIN_SLP(gpy5-1, INPUT, DOWN);
-		PIN_SLP(gpy5-2, INPUT, DOWN);
-		PIN_SLP(gpy5-3, INPUT, DOWN);
-		PIN_SLP(gpy5-4, INPUT, DOWN);
-		PIN_SLP(gpy5-5, INPUT, DOWN);
-		PIN_SLP(gpy5-6, INPUT, DOWN);
-		PIN_SLP(gpy5-7, INPUT, DOWN);
-
-		PIN_SLP(gpy6-0, INPUT, DOWN);
-		PIN_SLP(gpy6-1, INPUT, DOWN);
-		PIN_SLP(gpy6-2, INPUT, DOWN);
-		PIN_SLP(gpy6-3, INPUT, DOWN);
-		PIN_SLP(gpy6-4, INPUT, DOWN);
-		PIN_SLP(gpy6-5, INPUT, DOWN);
-		PIN_SLP(gpy6-6, INPUT, DOWN);
-		PIN_SLP(gpy6-7, INPUT, DOWN);
-	};
-};
-
-&pinctrl_2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep2>;
-
-	sleep2: sleep-states {
-		PIN_SLP(gpz-0, INPUT, DOWN);
-		PIN_SLP(gpz-1, INPUT, DOWN);
-		PIN_SLP(gpz-2, INPUT, DOWN);
-		PIN_SLP(gpz-3, INPUT, DOWN);
-		PIN_SLP(gpz-4, INPUT, DOWN);
-		PIN_SLP(gpz-5, INPUT, DOWN);
-		PIN_SLP(gpz-6, INPUT, DOWN);
-	};
-};
-
-&pinctrl_3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&sleep3>;
-
-	sleep3: sleep-states {
-		PIN_SLP(gpv0-0, INPUT, DOWN);
-		PIN_SLP(gpv0-1, INPUT, DOWN);
-		PIN_SLP(gpv0-2, INPUT, DOWN);
-		PIN_SLP(gpv0-3, INPUT, DOWN);
-		PIN_SLP(gpv0-4, INPUT, DOWN);
-		PIN_SLP(gpv0-5, INPUT, DOWN);
-		PIN_SLP(gpv0-6, INPUT, DOWN);
-		PIN_SLP(gpv0-7, INPUT, DOWN);
-
-		PIN_SLP(gpv1-0, INPUT, DOWN);
-		PIN_SLP(gpv1-1, INPUT, DOWN);
-		PIN_SLP(gpv1-2, INPUT, DOWN);
-		PIN_SLP(gpv1-3, INPUT, DOWN);
-		PIN_SLP(gpv1-4, INPUT, DOWN);
-		PIN_SLP(gpv1-5, INPUT, DOWN);
-		PIN_SLP(gpv1-6, INPUT, DOWN);
-		PIN_SLP(gpv1-7, INPUT, DOWN);
-
-		PIN_SLP(gpv2-0, INPUT, DOWN);
-		PIN_SLP(gpv2-1, INPUT, DOWN);
-		PIN_SLP(gpv2-2, INPUT, DOWN);
-		PIN_SLP(gpv2-3, INPUT, DOWN);
-		PIN_SLP(gpv2-4, INPUT, DOWN);
-		PIN_SLP(gpv2-5, INPUT, DOWN);
-		PIN_SLP(gpv2-6, INPUT, DOWN);
-		PIN_SLP(gpv2-7, INPUT, DOWN);
-
-		PIN_SLP(gpv3-0, INPUT, DOWN);
-		PIN_SLP(gpv3-1, INPUT, DOWN);
-		PIN_SLP(gpv3-2, INPUT, DOWN);
-		PIN_SLP(gpv3-3, INPUT, DOWN);
-		PIN_SLP(gpv3-4, INPUT, DOWN);
-		PIN_SLP(gpv3-5, INPUT, DOWN);
-		PIN_SLP(gpv3-6, INPUT, DOWN);
-		PIN_SLP(gpv3-7, INPUT, DOWN);
-
-		PIN_SLP(gpv4-0, INPUT, DOWN);
-	};
-};
-
-&pwm {
-	pinctrl-0 = <&pwm0_out>;
-	pinctrl-names = "default";
-	samsung,pwm-outputs = <0>;
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sdhci_2 {
-	bus-width = <4>;
-	cd-gpios = <&gpx3 4 0>;
-	cd-inverted;
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
-	pinctrl-names = "default";
-	vmmc-supply = <&ldo21_reg>;
-	status = "okay";
-};
-
-&serial_0 {
-	status = "okay";
-};
-
-&serial_1 {
-	status = "okay";
-};
-
-&serial_2 {
-	status = "okay";
-};
-
-&serial_3 {
-	status = "okay";
-};
-
-&spi_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&spi1_bus>;
-	cs-gpios = <&gpb 5 0>;
-	status = "okay";
-
-	s5c73m3_spi: s5c73m3 {
-		compatible = "samsung,s5c73m3";
-		spi-max-frequency = <50000000>;
-		reg = <0>;
-		controller-data {
-			samsung,spi-feedback-delay = <2>;
-		};
-	};
-};
-
-&tmu {
-	vtmu-supply = <&ldo10_reg>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index b78ada70bd05..82a36fb5ee8b 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos4412 SoC device tree source
  *
@@ -11,62 +12,808 @@
  * Note: This file does not include device nodes for all the controllers in
  * Exynos4412 SoC. As device tree coverage for Exynos4412 increases, additional
  * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
+
+#include "exynos4.dtsi"
 
-#include "exynos4x12.dtsi"
+#include "exynos4-cpu-thermal.dtsi"
 
 / {
 	compatible = "samsung,exynos4412", "samsung,exynos4";
 
+	aliases {
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
+		fimc-lite0 = &fimc_lite_0;
+		fimc-lite1 = &fimc_lite_1;
+	};
+
+	bus_acp: bus-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_ACP>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_acp_opp_table>;
+		status = "disabled";
+
+		bus_acp_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+			};
+		};
+	};
+
+	bus_c2c: bus-c2c {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_C2C>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		status = "disabled";
+	};
+
+	bus_dmc: bus-dmc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_DMC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_dmc_opp_table>;
+		samsung,data-clock-ratio = <4>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_display: bus-display {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK160>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_display_opp_table>;
+		interconnects = <&bus_leftbus &bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+
+		bus_display_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-160000000 {
+				opp-hz = /bits/ 64 <160000000>;
+			};
+			opp-200000000 {
+				opp-hz = /bits/ 64 <200000000>;
+			};
+		};
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK133>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_fsys_opp_table>;
+		status = "disabled";
+
+		bus_fsys_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+			opp-134000000 {
+				opp-hz = /bits/ 64 <134000000>;
+			};
+		};
+	};
+
+	bus_leftbus: bus-leftbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDL>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		interconnects = <&bus_dmc>;
+		#interconnect-cells = <0>;
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_SCLK_MFC>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_ACLK100>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_peri_opp_table>;
+		status = "disabled";
+
+		bus_peri_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-50000000 {
+				opp-hz = /bits/ 64 <50000000>;
+			};
+			opp-100000000 {
+				opp-hz = /bits/ 64 <100000000>;
+			};
+		};
+	};
+
+	bus_rightbus: bus-rightbus {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DIV_GDR>;
+		clock-names = "bus";
+		operating-points-v2 = <&bus_leftbus_opp_table>;
+		status = "disabled";
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu0: cpu@A00 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@a00 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA00>;
-			cooling-min-level = <13>;
-			cooling-max-level = <7>;
+			reg = <0xa00>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
 
-		cpu@A01 {
+		cpu1: cpu@a01 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA01>;
+			reg = <0xa01>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
-		cpu@A02 {
+		cpu2: cpu@a02 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA02>;
+			reg = <0xa02>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
-		cpu@A03 {
+		cpu3: cpu@a03 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a9";
-			reg = <0xA03>;
+			reg = <0xa03>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
-	pmu {
-		interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <900000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <987500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <200000>;
+			opp-suspend;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1037500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1087500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1137500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1187500>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <200000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1287500>;
+			clock-latency-ns = <200000>;
+		};
+		cpu0_opp_1500: opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1350000>;
+			clock-latency-ns = <200000>;
+			turbo-mode;
+		};
 	};
-};
 
-&pmu_system_controller {
-	compatible = "samsung,exynos4412-pmu", "syscon";
+	bus_dmc_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1050000>;
+			opp-suspend;
+		};
+	};
+
+	bus_leftbus_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-134000000 {
+			opp-hz = /bits/ 64 <134000000>;
+			opp-microvolt = <925000>;
+		};
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1000000>;
+			opp-suspend;
+		};
+	};
+
+	soc: soc {
+
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_1: pinctrl@11000000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x11000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		pinctrl_2: pinctrl@3860000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 0>;
+		};
+
+		pinctrl_3: pinctrl@106e0000 {
+			compatible = "samsung,exynos4x12-pinctrl";
+			reg = <0x106e0000 0x1000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x40000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
+		};
+
+		pd_isp: power-domain@10023ca0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10023ca0 0x20>;
+			#power-domain-cells = <0>;
+			label = "ISP";
+		};
+
+		l2c: cache-controller@10502000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10502000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			prefetch-data = <1>;
+			prefetch-instr = <1>;
+			arm,tag-latency = <2 2 1>;
+			arm,data-latency = <3 2 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+			arm,double-linefill-wrap = <1>;
+			arm,prefetch-drop = <1>;
+			arm,prefetch-offset = <7>;
+		};
+
+		clock: clock-controller@10030000 {
+			compatible = "samsung,exynos4412-clock";
+			reg = <0x10030000 0x18000>;
+			#clock-cells = <1>;
+		};
+
+		isp_clock: clock-controller@10048000 {
+			compatible = "samsung,exynos4412-isp-clock";
+			reg = <0x10048000 0x1000>;
+			#clock-cells = <1>;
+			power-domains = <&pd_isp>;
+			clocks = <&clock CLK_ACLK200>,
+				 <&clock CLK_ACLK400_MCUISP>;
+			clock-names = "aclk200", "aclk400_mcuisp";
+		};
+
+		timer@10050000 {
+			compatible = "samsung,exynos4412-mct";
+			reg = <0x10050000 0x800>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+					      <&combiner 12 5>,
+					      <&combiner 12 6>,
+					      <&combiner 12 7>,
+					      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@10060000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
+
+		adc: adc@126c0000 {
+			compatible = "samsung,exynos4212-adc";
+			reg = <0x126c0000 0x100>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 3>;
+			clocks = <&clock CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
+
+		g2d: g2d@10800000 {
+			compatible = "samsung,exynos4212-g2d";
+			reg = <0x10800000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
+			clock-names = "sclk_fimg2d", "fimg2d";
+			iommus = <&sysmmu_g2d>;
+		};
+
+		mshc_0: mmc@12550000 {
+			compatible = "samsung,exynos4412-dw-mshc";
+			reg = <0x12550000 0x1000>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			fifo-depth = <0x80>;
+			clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		sysmmu_g2d: sysmmu@10a40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10a40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 7>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_isp: sysmmu@12260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 2>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_ISP>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_drc: sysmmu@12270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 3>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_DRC>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_fd: sysmmu@122a0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x122a0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 4>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_FD>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_mcuctl: sysmmu@122b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x122b0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 5>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu";
+			clocks = <&isp_clock CLK_ISP_SMMU_ISPCX>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite0: sysmmu@123b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x123b0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 0>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu", "master";
+			clocks = <&isp_clock CLK_ISP_SMMU_LITE0>,
+				 <&isp_clock CLK_ISP_FIMC_LITE0>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimc_lite1: sysmmu@123c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x123c0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <16 1>;
+			power-domains = <&pd_isp>;
+			clock-names = "sysmmu", "master";
+			clocks = <&isp_clock CLK_ISP_SMMU_LITE1>,
+				 <&isp_clock CLK_ISP_FIMC_LITE1>;
+			#iommu-cells = <0>;
+		};
+	};
 };
 
 &combiner {
 	samsung,combiner-nr = <20>;
+	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&camera {
+	clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
+		 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
+	clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+	/* fimc_[0-3] are configured outside, under phandles */
+	fimc_lite_0: fimc-lite@12390000 {
+		compatible = "samsung,exynos4212-fimc-lite";
+		reg = <0x12390000 0x1000>;
+		interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>;
+		clock-names = "flite";
+		iommus = <&sysmmu_fimc_lite0>;
+		status = "disabled";
+	};
+
+	fimc_lite_1: fimc-lite@123a0000 {
+		compatible = "samsung,exynos4212-fimc-lite";
+		reg = <0x123a0000 0x1000>;
+		interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE1>;
+		clock-names = "flite";
+		iommus = <&sysmmu_fimc_lite1>;
+		status = "disabled";
+	};
+
+	fimc_is: fimc-is@12000000 {
+		compatible = "samsung,exynos4212-fimc-is";
+		reg = <0x12000000 0x260000>;
+		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&pd_isp>;
+		clocks = <&isp_clock CLK_ISP_FIMC_LITE0>,
+			 <&isp_clock CLK_ISP_FIMC_LITE1>,
+			 <&isp_clock CLK_ISP_PPMUISPX>,
+			 <&isp_clock CLK_ISP_PPMUISPMX>,
+			 <&isp_clock CLK_ISP_FIMC_ISP>,
+			 <&isp_clock CLK_ISP_FIMC_DRC>,
+			 <&isp_clock CLK_ISP_FIMC_FD>,
+			 <&isp_clock CLK_ISP_MCUISP>,
+			 <&isp_clock CLK_ISP_GICISP>,
+			 <&isp_clock CLK_ISP_MCUCTL_ISP>,
+			 <&isp_clock CLK_ISP_PWM_ISP>,
+			 <&isp_clock CLK_ISP_DIV_ISP0>,
+			 <&isp_clock CLK_ISP_DIV_ISP1>,
+			 <&isp_clock CLK_ISP_DIV_MCUISP0>,
+			 <&isp_clock CLK_ISP_DIV_MCUISP1>,
+			 <&clock CLK_MOUT_MPLL_USER_T>,
+			 <&clock CLK_ACLK200>,
+			 <&clock CLK_ACLK400_MCUISP>,
+			 <&clock CLK_DIV_ACLK200>,
+			 <&clock CLK_DIV_ACLK400_MCUISP>,
+			 <&clock CLK_UART_ISP_SCLK>;
+		clock-names = "lite0", "lite1", "ppmuispx",
+			      "ppmuispmx", "isp",
+			      "drc", "fd", "mcuisp",
+			      "gicisp", "mcuctl_isp", "pwm_isp",
+			      "ispdiv0", "ispdiv1", "mcuispdiv0",
+			      "mcuispdiv1", "mpll", "aclk200",
+			      "aclk400mcuisp", "div_aclk200",
+			      "div_aclk400mcuisp", "uart";
+		iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
+			 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
+		iommu-names = "isp", "drc", "fd", "mcuctl";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		status = "disabled";
+
+		pmu@10020000 {
+			reg = <0x10020000 0x3000>;
+		};
+
+		i2c1_isp: i2c-isp@12140000 {
+			compatible = "samsung,exynos4212-i2c-isp";
+			reg = <0x12140000 0x100>;
+			clocks = <&isp_clock CLK_ISP_I2C1_ISP>;
+			clock-names = "i2c_isp";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&exynos_usbphy {
+	compatible = "samsung,exynos4x12-usb2-phy";
+	samsung,sysreg-phandle = <&sys_reg>;
+};
+
+&fimc_0 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_1 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,cam-if;
+};
+
+&fimc_2 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <4224 8192 1920 4224>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
+	samsung,cam-if;
+};
+
+&fimc_3 {
+	compatible = "samsung,exynos4212-fimc";
+	samsung,pix-limits = <1920 8192 1366 1920>;
+	samsung,rotators = <0>;
+	samsung,mainscaler-ext;
+	samsung,isp-wb;
+	samsung,lcd-wb;
 };
 
 &gic {
 	cpu-offset = <0x4000>;
 };
+
+&gpu {
+	interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+		     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-names = "gp",
+			  "gpmmu",
+			  "pp0",
+			  "ppmmu0",
+			  "pp1",
+			  "ppmmu1",
+			  "pp2",
+			  "ppmmu2",
+			  "pp3",
+			  "ppmmu3",
+			  "pmu";
+	operating-points-v2 = <&gpu_opp_table>;
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-160000000 {
+			opp-hz = /bits/ 64 <160000000>;
+			opp-microvolt = <875000>;
+		};
+		opp-267000000 {
+			opp-hz = /bits/ 64 <267000000>;
+			opp-microvolt = <900000>;
+		};
+		opp-350000000 {
+			opp-hz = /bits/ 64 <350000000>;
+			opp-microvolt = <950000>;
+		};
+		opp-440000000 {
+			opp-hz = /bits/ 64 <440000000>;
+			opp-microvolt = <1025000>;
+		};
+	};
+};
+
+&hdmi {
+	compatible = "samsung,exynos4212-hdmi";
+};
+
+&jpeg_codec {
+	compatible = "samsung,exynos4212-jpeg";
+};
+
+&rotator {
+	compatible = "samsung,exynos4212-rotator";
+};
+
+&mixer {
+	compatible = "samsung,exynos4212-mixer";
+	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
+	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
+	interconnects = <&bus_display &bus_dmc>;
+};
+
+&pmu {
+	interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
+
+&pmu_system_controller {
+	compatible = "samsung,exynos4412-pmu", "simple-mfd", "syscon";
+	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
+			"clkout4", "clkout8", "clkout9";
+	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
+		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
+		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
+	#clock-cells = <1>;
+};
+
+&tmu {
+	compatible = "samsung,exynos4412-tmu";
+	interrupt-parent = <&combiner>;
+	interrupts = <2 4>;
+	reg = <0x100c0000 0x100>;
+	clocks = <&clock CLK_TMU_APBIF>;
+	clock-names = "tmu_apbif";
+	status = "disabled";
+};
+
+#include "exynos4412-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
deleted file mode 100644
index 75af9c56123e..000000000000
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ /dev/null
@@ -1,573 +0,0 @@
-/*
- * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *
- * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-&pinctrl_0 {
-	gpa0: gpa0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpa1: gpa1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpb: gpb {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc0: gpc0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpc1: gpc1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd0: gpd0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpd1: gpd1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf0: gpf0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf1: gpf1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpf2: gpf2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	uart0_data: uart0-data {
-		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <0x2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart0_fctl: uart0-fctl {
-		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_data: uart1-data {
-		samsung,pins = "gpa0-4", "gpa0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart1_fctl: uart1-fctl {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_data: uart2-data {
-		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart2_fctl: uart2-fctl {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	uart3_data: uart3-data {
-		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c2_bus: i2c2-bus {
-		samsung,pins = "gpa0-6", "gpa0-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c3_bus: i2c3-bus {
-		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi0_bus: spi0-bus {
-		samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c4_bus: i2c4-bus {
-		samsung,pins = "gpb-0", "gpb-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi1_bus: spi1-bus {
-		samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c5_bus: i2c5-bus {
-		samsung,pins = "gpb-2", "gpb-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s1_bus: i2s1-bus {
-		samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-				"gpc0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2s2_bus: i2s2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pcm2_bus: pcm2-bus {
-		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-				"gpc1-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c6_bus: i2c6-bus {
-		samsung,pins = "gpc1-3", "gpc1-4";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	spi2_bus: spi2-bus {
-		samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-		samsung,pin-function = <5>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm0_out: pwm0-out {
-		samsung,pins = "gpd0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm1_out: pwm1-out {
-		samsung,pins = "gpd0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm2_out: pwm2-out {
-		samsung,pins = "gpd0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	pwm3_out: pwm3-out {
-		samsung,pins = "gpd0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c7_bus: i2c7-bus {
-		samsung,pins = "gpd0-2", "gpd0-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c0_bus: i2c0-bus {
-		samsung,pins = "gpd1-0", "gpd1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	i2c1_bus: i2c1-bus {
-		samsung,pins = "gpd1-2", "gpd1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	gpk0: gpk0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk1: gpk1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk2: gpk2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpk3: gpk3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpl0: gpl0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm0: gpm0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm1: gpm1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm2: gpm2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm3: gpm3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpm4: gpm4 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx0: gpx0 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
-				<0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx1: gpx1 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
-				<0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
-		#interrupt-cells = <2>;
-	};
-
-	gpx2: gpx2 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	gpx3: gpx3 {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	sd0_clk: sd0-clk {
-		samsung,pins = "gpk0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cmd: sd0-cmd {
-		samsung,pins = "gpk0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_cd: sd0-cd {
-		samsung,pins = "gpk0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_rdqs: sd0-rdqs {
-		samsung,pins = "gpk0-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus1: sd0-bus-width1 {
-		samsung,pins = "gpk0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus4: sd0-bus-width4 {
-		samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd0_bus8: sd0-bus-width8 {
-		samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_clk: sd1-clk {
-		samsung,pins = "gpk1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cmd: sd1-cmd {
-		samsung,pins = "gpk1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_cd: sd1-cd {
-		samsung,pins = "gpk1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pins = "gpk1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_clk: sd2-clk {
-		samsung,pins = "gpk2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
-	};
-
-	sd2_cmd: sd2-cmd {
-		samsung,pins = "gpk2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <4>;
-	};
-
-	sd2_cd: sd2-cd {
-		samsung,pins = "gpk2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <3>;
-	};
-
-	sd2_bus1: sd2-bus-width1 {
-		samsung,pins = "gpk2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
-	};
-
-	sd2_bus4: sd2-bus-width4 {
-		samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <4>;
-	};
-
-	cam_port_b_io: cam-port-b-io {
-		samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-				"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-				"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	cam_port_b_clk_active: cam-port-b-clk-active {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <3>;
-	};
-
-	cam_port_b_clk_idle: cam-port-b-clk-idle {
-		samsung,pins = "gpm2-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_i2c0: fimc-is-i2c0 {
-		samsung,pins = "gpm4-0", "gpm4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_i2c1: fimc-is-i2c1 {
-		samsung,pins = "gpm4-2", "gpm4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	fimc_is_uart: fimc-is-uart {
-		samsung,pins = "gpm3-5", "gpm3-7";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_2 {
-	gpz: gpz {
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		interrupt-controller;
-		#interrupt-cells = <2>;
-	};
-
-	i2s0_bus: i2s0-bus {
-		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-				"gpz-4", "gpz-5", "gpz-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
deleted file mode 100644
index ad764842fff5..000000000000
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ /dev/null
@@ -1,649 +0,0 @@
-/*
- * Samsung's Exynos4415 SoC device tree source
- *
- * Copyright (c) 2014 Samsung Electronics Co., Ltd.
- *
- * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415
- * based board files can include this file and provide values for board
- * specific bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/exynos4415.h>
-#include <dt-bindings/clock/exynos-audss-clk.h>
-
-/ {
-	compatible = "samsung,exynos4415";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		mshc0 = &mshc_0;
-		mshc1 = &mshc_1;
-		mshc2 = &mshc_2;
-		spi0 = &spi_0;
-		spi1 = &spi_1;
-		spi2 = &spi_2;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &i2c_4;
-		i2c5 = &i2c_5;
-		i2c6 = &i2c_6;
-		i2c7 = &i2c_7;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@a00 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa00>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu1: cpu@a01 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa01>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu2: cpu@a02 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa02>;
-			clock-frequency = <1600000000>;
-		};
-
-		cpu3: cpu@a03 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a9";
-			reg = <0xa03>;
-			clock-frequency = <1600000000>;
-		};
-	};
-
-	soc: soc {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x50000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x50000>;
-
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
-
-			smp-sysram@4f000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x4f000 0x1000>;
-			};
-		};
-
-		pinctrl_2: pinctrl@03860000 {
-			compatible = "samsung,exynos4415-pinctrl";
-			reg = <0x03860000 0x1000>;
-			interrupts = <0 242 0>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
-		sysreg_system_controller: syscon@10010000 {
-			compatible = "samsung,exynos4-sysreg", "syscon";
-			reg = <0x10010000 0x400>;
-		};
-
-		pmu_system_controller: system-controller@10020000 {
-			compatible = "samsung,exynos4415-pmu", "syscon";
-			reg = <0x10020000 0x4000>;
-		};
-
-		mipi_phy: video-phy@10020710 {
-			compatible = "samsung,s5pv210-mipi-video-phy";
-			#phy-cells = <1>;
-			syscon = <&pmu_system_controller>;
-		};
-
-		pd_cam: cam-power-domain@10024000 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024000 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_tv: tv-power-domain@10024020 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024020 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_mfc: mfc-power-domain@10024040 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024040 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_g3d: g3d-power-domain@10024060 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024060 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_lcd0: lcd0-power-domain@10024080 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x10024080 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_isp0: isp0-power-domain@100240A0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100240A0 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		pd_isp1: isp1-power-domain@100240E0 {
-			compatible = "samsung,exynos4210-pd";
-			reg = <0x100240E0 0x20>;
-			#power-domain-cells = <0>;
-		};
-
-		cmu: clock-controller@10030000 {
-			compatible = "samsung,exynos4415-cmu";
-			reg = <0x10030000 0x18000>;
-			#clock-cells = <1>;
-		};
-
-		rtc: rtc@10070000 {
-			compatible = "samsung,s3c6410-rtc";
-			reg = <0x10070000 0x100>;
-			interrupts = <0 73 0>, <0 74 0>;
-			status = "disabled";
-		};
-
-		mct@10050000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x10050000 0x800>;
-			interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
-				     <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
-			clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg = <0x10481000 0x1000>,
-			      <0x10482000 0x1000>,
-			      <0x10484000 0x2000>,
-			      <0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		l2c: l2-cache-controller@10502000 {
-			compatible = "arm,pl310-cache";
-			reg = <0x10502000 0x1000>;
-			cache-unified;
-			cache-level = <2>;
-			arm,tag-latency = <2 2 1>;
-			arm,data-latency = <3 2 1>;
-			arm,double-linefill = <1>;
-			arm,double-linefill-incr = <0>;
-			arm,double-linefill-wrap = <1>;
-			arm,prefetch-drop = <1>;
-			arm,prefetch-offset = <7>;
-		};
-
-		cmu_dmc: clock-controller@105C0000 {
-			compatible = "samsung,exynos4415-cmu-dmc";
-			reg = <0x105C0000 0x3000>;
-			#clock-cells = <1>;
-		};
-
-		pinctrl_1: pinctrl@11000000 {
-			compatible = "samsung,exynos4415-pinctrl";
-			reg = <0x11000000 0x1000>;
-			interrupts = <0 225 0>;
-
-			wakeup-interrupt-controller {
-				compatible = "samsung,exynos4210-wakeup-eint";
-				interrupt-parent = <&gic>;
-				interrupts = <0 48 0>;
-			};
-		};
-
-		pinctrl_0: pinctrl@11400000 {
-			compatible = "samsung,exynos4415-pinctrl";
-			reg = <0x11400000 0x1000>;
-			interrupts = <0 240 0>;
-		};
-
-		fimd: fimd@11C00000 {
-			compatible = "samsung,exynos4415-fimd";
-			reg = <0x11C00000 0x30000>;
-			interrupt-names = "fifo", "vsync", "lcd_sys";
-			interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
-			clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
-			clock-names = "sclk_fimd", "fimd";
-			samsung,power-domain = <&pd_lcd0>;
-			iommus = <&sysmmu_fimd0>;
-			samsung,sysreg = <&sysreg_system_controller>;
-			status = "disabled";
-		};
-
-		dsi_0: dsi@11C80000 {
-			compatible = "samsung,exynos4415-mipi-dsi";
-			reg = <0x11C80000 0x10000>;
-			interrupts = <0 83 0>;
-			samsung,phy-type = <0>;
-			samsung,power-domain = <&pd_lcd0>;
-			phys = <&mipi_phy 1>;
-			phy-names = "dsim";
-			clocks = <&cmu CLK_DSIM0>, <&cmu CLK_SCLK_MIPI0>;
-			clock-names = "bus_clk", "pll_clk";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		sysmmu_fimd0: sysmmu@11E20000 {
-			compatible = "samsung,exynos-sysmmu";
-			reg = <0x11e20000 0x1000>;
-			interrupts = <0 80 0>, <0 81 0>;
-			clock-names = "sysmmu", "master";
-			clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
-			power-domains = <&pd_lcd0>;
-			#iommu-cells = <0>;
-		};
-
-		hsotg: hsotg@12480000 {
-			compatible = "samsung,s3c6400-hsotg";
-			reg = <0x12480000 0x20000>;
-			interrupts = <0 141 0>;
-			clocks = <&cmu CLK_USBDEVICE>;
-			clock-names = "otg";
-			phys = <&exynos_usbphy 0>;
-			phy-names = "usb2-phy";
-			status = "disabled";
-		};
-
-		mshc_0: mshc@12510000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12510000 0x1000>;
-			interrupts = <0 142 0>;
-			clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_1: mshc@12520000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12520000 0x1000>;
-			interrupts = <0 143 0>;
-			clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		mshc_2: mshc@12530000 {
-			compatible = "samsung,exynos5250-dw-mshc";
-			reg = <0x12530000 0x1000>;
-			interrupts = <0 144 0>;
-			clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
-			clock-names = "biu", "ciu";
-			fifo-depth = <0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			status = "disabled";
-		};
-
-		ehci: ehci@12580000 {
-			compatible = "samsung,exynos4210-ehci";
-			reg = <0x12580000 0x100>;
-			interrupts = <0 140 0>;
-			clocks = <&cmu CLK_USBHOST>;
-			clock-names = "usbhost";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&exynos_usbphy 1>;
-				status = "disabled";
-			};
-			port@1 {
-				reg = <1>;
-				phys = <&exynos_usbphy 2>;
-				status = "disabled";
-			};
-			port@2 {
-				reg = <2>;
-				phys = <&exynos_usbphy 3>;
-				status = "disabled";
-			};
-		};
-
-		ohci: ohci@12590000 {
-			compatible = "samsung,exynos4210-ohci";
-			reg = <0x12590000 0x100>;
-			interrupts = <0 140 0>;
-			clocks = <&cmu CLK_USBHOST>;
-			clock-names = "usbhost";
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				phys = <&exynos_usbphy 1>;
-				status = "disabled";
-			};
-		};
-
-		exynos_usbphy: exynos-usbphy@125B0000 {
-			compatible = "samsung,exynos4x12-usb2-phy";
-			reg = <0x125B0000 0x100>;
-			samsung,pmureg-phandle = <&pmu_system_controller>;
-			samsung,sysreg-phandle = <&sysreg_system_controller>;
-			clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>;
-			clock-names = "phy", "ref";
-			#phy-cells = <1>;
-			status = "disabled";
-		};
-
-		amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			interrupt-parent = <&gic>;
-			ranges;
-
-			pdma0: pdma@12680000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12680000 0x1000>;
-				interrupts = <0 138 0>;
-				clocks = <&cmu CLK_PDMA0>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-
-			pdma1: pdma@12690000 {
-				compatible = "arm,pl330", "arm,primecell";
-				reg = <0x12690000 0x1000>;
-				interrupts = <0 139 0>;
-				clocks = <&cmu CLK_PDMA1>;
-				clock-names = "apb_pclk";
-				#dma-cells = <1>;
-				#dma-channels = <8>;
-				#dma-requests = <32>;
-			};
-		};
-
-		adc: adc@126C0000 {
-			compatible = "samsung,exynos3250-adc",
-				     "samsung,exynos-adc-v2";
-			reg = <0x126C0000 0x100>, <0x10020718 0x4>;
-			interrupts = <0 137 0>;
-			clock-names = "adc", "sclk";
-			clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
-			#io-channel-cells = <1>;
-			io-channel-ranges;
-			status = "disabled";
-		};
-
-		serial_0: serial@13800000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13800000 0x100>;
-			interrupts = <0 109 0>;
-			clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		serial_1: serial@13810000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13810000 0x100>;
-			interrupts = <0 110 0>;
-			clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		serial_2: serial@13820000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13820000 0x100>;
-			interrupts = <0 111 0>;
-			clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		serial_3: serial@13830000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x13830000 0x100>;
-			interrupts = <0 112 0>;
-			clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
-		};
-
-		i2c_0: i2c@13860000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13860000 0x100>;
-			interrupts = <0 113 0>;
-			clocks = <&cmu CLK_I2C0>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c0_bus>;
-			status = "disabled";
-		};
-
-		i2c_1: i2c@13870000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13870000 0x100>;
-			interrupts = <0 114 0>;
-			clocks = <&cmu CLK_I2C1>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c1_bus>;
-			status = "disabled";
-		};
-
-		i2c_2: i2c@13880000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13880000 0x100>;
-			interrupts = <0 115 0>;
-			clocks = <&cmu CLK_I2C2>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c2_bus>;
-			status = "disabled";
-		};
-
-		i2c_3: i2c@13890000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x13890000 0x100>;
-			interrupts = <0 116 0>;
-			clocks = <&cmu CLK_I2C3>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c3_bus>;
-			status = "disabled";
-		};
-
-		i2c_4: i2c@138A0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138A0000 0x100>;
-			interrupts = <0 117 0>;
-			clocks = <&cmu CLK_I2C4>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c4_bus>;
-			status = "disabled";
-		};
-
-		i2c_5: i2c@138B0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138B0000 0x100>;
-			interrupts = <0 118 0>;
-			clocks = <&cmu CLK_I2C5>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c5_bus>;
-			status = "disabled";
-		};
-
-		i2c_6: i2c@138C0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138C0000 0x100>;
-			interrupts = <0 119 0>;
-			clocks = <&cmu CLK_I2C6>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c6_bus>;
-			status = "disabled";
-		};
-
-		i2c_7: i2c@138D0000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "samsung,s3c2440-i2c";
-			reg = <0x138D0000 0x100>;
-			interrupts = <0 120 0>;
-			clocks = <&cmu CLK_I2C7>;
-			clock-names = "i2c";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2c7_bus>;
-			status = "disabled";
-		};
-
-		spi_0: spi@13920000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13920000 0x100>;
-			interrupts = <0 121 0>;
-			dmas = <&pdma0 7>, <&pdma0 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi0_bus>;
-			status = "disabled";
-		};
-
-		spi_1: spi@13930000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13930000 0x100>;
-			interrupts = <0 122 0>;
-			dmas = <&pdma1 7>, <&pdma1 6>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi1_bus>;
-			status = "disabled";
-		};
-
-		spi_2: spi@13940000 {
-			compatible = "samsung,exynos4210-spi";
-			reg = <0x13940000 0x100>;
-			interrupts = <0 123 0>;
-			dmas = <&pdma0 9>, <&pdma0 8>;
-			dma-names = "tx", "rx";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>;
-			clock-names = "spi", "spi_busclk0";
-			samsung,spi-src-clk = <0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&spi2_bus>;
-			status = "disabled";
-		};
-
-		clock_audss: clock-controller@03810000 {
-			compatible = "samsung,exynos4210-audss-clock";
-			reg = <0x03810000 0x0C>;
-			#clock-cells = <1>;
-		};
-
-		i2s0: i2s@3830000 {
-			compatible = "samsung,s5pv210-i2s";
-			reg = <0x03830000 0x100>;
-			interrupts = <0 124 0>;
-			clocks = <&clock_audss EXYNOS_I2S_BUS>,
-				<&clock_audss EXYNOS_SCLK_I2S>;
-			clock-names = "iis", "i2s_opclk0";
-			dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>;
-			dma-names = "tx", "rx", "tx-sec";
-			pinctrl-names = "default";
-			pinctrl-0 = <&i2s0_bus>;
-			samsung,idma-addr = <0x03000000>;
-			status = "disabled";
-		};
-
-		pwm: pwm@139D0000 {
-			compatible = "samsung,exynos4210-pwm";
-			reg = <0x139D0000 0x1000>;
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-				     <0 107 0>, <0 108 0>;
-			#pwm-cells = <3>;
-			status = "disabled";
-		};
-
-		pmu {
-			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>;
-		};
-	};
-};
-
-#include "exynos4415-pinctrl.dtsi"
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
deleted file mode 100644
index bac25c672789..000000000000
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ /dev/null
@@ -1,972 +0,0 @@
-/*
- * Samsung's Exynos4x12 SoCs pin-mux and pin-config device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4x12 SoCs pin-mux and pin-config optiosn are listed as device
- * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define PIN_PULL_NONE		0
-#define PIN_PULL_DOWN		1
-#define PIN_PULL_UP		3
-
-#define PIN_PDN_OUT0		0
-#define PIN_PDN_OUT1		1
-#define PIN_PDN_INPUT		2
-#define PIN_PDN_PREV		3
-
-#define PIN_SLP(_pin, _mode, _pull)				\
-	_pin {							\
-		samsung,pins = #_pin;				\
-		samsung,pin-con-pdn = <PIN_PDN_ ##_mode>;	\
-		samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>;	\
-	}
-
-/ {
-	pinctrl_0: pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb: gpb {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf2: gpf2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf3: gpf3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj0: gpj0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj1: gpj1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_a: uart-audio-a {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart_audio_b: uart-audio-b {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpb-0", "gpb-2", "gpb-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpb-0", "gpb-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpb-4", "gpb-6", "gpb-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpb-2", "gpb-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
-					"gpc0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
-					"gpc1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpc1-0", "gpc1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpc1-3", "gpc1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpd0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ctrl: lcd-ctrl {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpd0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		mipi0_clk: mipi0-clk {
-			samsung,pins = "gpd1-0", "gpd1-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		mipi1_clk: mipi1-clk {
-			samsung,pins = "gpd1-2", "gpd1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_clk: lcd-clk {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data16: lcd-data-width16 {
-			samsung,pins = "gpf0-7", "gpf1-0", "gpf1-1", "gpf1-2",
-					"gpf1-3", "gpf1-6", "gpf1-7", "gpf2-0",
-					"gpf2-1", "gpf2-2", "gpf2-3", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data18: lcd-data-width18 {
-			samsung,pins = "gpf0-6", "gpf0-7", "gpf1-0", "gpf1-1",
-					"gpf1-2", "gpf1-3", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-6", "gpf2-7", "gpf3-0", "gpf3-1",
-					"gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_data24: lcd-data-width24 {
-			samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7",
-					"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3",
-					"gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7",
-					"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
-					"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
-					"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		lcd_ldi: lcd-ldi {
-			samsung,pins = "gpf3-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_io: cam-port-a-io {
-			samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
-					"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
-					"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a_clk_active: cam-port-a-clk-active {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_a_clk_idle: cam-port-a-clk-idle {
-			samsung,pins = "gpj1-3";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl_1: pinctrl@11000000 {
-		gpk0: gpk0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk1: gpk1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk2: gpk2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpk3: gpk3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl0: gpl0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl1: gpl1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpl2: gpl2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm0: gpm0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm1: gpm1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm2: gpm2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm3: gpm3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpm4: gpm4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				     <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&gic>;
-			interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				     <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-			#interrupt-cells = <2>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_clk: sd4-clk {
-			samsung,pins = "gpk0-0";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cmd: sd4-cmd {
-			samsung,pins = "gpk0-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_cd: sd4-cd {
-			samsung,pins = "gpk0-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus1: sd4-bus-width1 {
-			samsung,pins = "gpk0-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus4: sd4-bus-width4 {
-			samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd4_bus8: sd4-bus-width8 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpk1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpk1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpk1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpk1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpk2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpk2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpk2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpk2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpk3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpk3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpk3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpk3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_b_io: cam-port-b-io {
-			samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
-					"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
-					"gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_b_clk_active: cam-port-b-clk-active {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		cam_port_b_clk_idle: cam-port-b-clk-idle {
-			samsung,pins = "gpm2-2";
-			samsung,pin-function = <0>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint0: ext-int0 {
-			samsung,pins = "gpx0-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint8: ext-int8 {
-			samsung,pins = "gpx1-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint15: ext-int15 {
-			samsung,pins = "gpx1-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint16: ext-int16 {
-			samsung,pins = "gpx2-0";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		eint31: ext-int31 {
-			samsung,pins = "gpx3-7";
-			samsung,pin-function = <0xf>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_i2c0: fimc-is-i2c0 {
-			samsung,pins = "gpm4-0", "gpm4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_i2c1: fimc-is-i2c1 {
-			samsung,pins = "gpm4-2", "gpm4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		fimc_is_uart: fimc-is-uart {
-			samsung,pins = "gpm3-5", "gpm3-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl_2: pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm0_bus: pcm0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4";
-			samsung,pin-function = <0x3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl_3: pinctrl@106E0000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_bus: c2c-bus {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-					"gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-					"gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-					"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7",
-					"gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-					"gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-					"gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-					"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7",
-					"gpv4-0", "gpv4-1";
-			samsung,pin-function = <0x2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
deleted file mode 100644
index b77dac61ffb5..000000000000
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * Samsung's Exynos4x12 SoCs device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Samsung's Exynos4x12 SoCs device nodes are listed in this file. Exynos4x12
- * based board files can include this file and provide values for board specfic
- * bindings.
- *
- * Note: This file does not include device nodes for all the controllers in
- * Exynos4x12 SoC. As device tree coverage for Exynos4x12 increases, additional
- * nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "exynos4.dtsi"
-#include "exynos4x12-pinctrl.dtsi"
-#include "exynos4-cpu-thermal.dtsi"
-
-/ {
-	aliases {
-		pinctrl0 = &pinctrl_0;
-		pinctrl1 = &pinctrl_1;
-		pinctrl2 = &pinctrl_2;
-		pinctrl3 = &pinctrl_3;
-		fimc-lite0 = &fimc_lite_0;
-		fimc-lite1 = &fimc_lite_1;
-		mshc0 = &mshc_0;
-	};
-
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x40000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x40000>;
-
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
-		};
-
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
-		};
-	};
-
-	pd_isp: isp-power-domain@10023CA0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10023CA0 0x20>;
-		#power-domain-cells = <0>;
-	};
-
-	l2c: l2-cache-controller@10502000 {
-		compatible = "arm,pl310-cache";
-		reg = <0x10502000 0x1000>;
-		cache-unified;
-		cache-level = <2>;
-		arm,tag-latency = <2 2 1>;
-		arm,data-latency = <3 2 1>;
-		arm,double-linefill = <1>;
-		arm,double-linefill-incr = <0>;
-		arm,double-linefill-wrap = <1>;
-		arm,prefetch-drop = <1>;
-		arm,prefetch-offset = <7>;
-	};
-
-	clock: clock-controller@10030000 {
-		compatible = "samsung,exynos4412-clock";
-		reg = <0x10030000 0x20000>;
-		#clock-cells = <1>;
-	};
-
-	mct@10050000 {
-		compatible = "samsung,exynos4412-mct";
-		reg = <0x10050000 0x800>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &gic 0 57 0>,
-					<1 &combiner 12 5>,
-					<2 &combiner 12 6>,
-					<3 &combiner 12 7>,
-					<4 &gic 1 12 0>;
-		};
-	};
-
-	adc: adc@126C0000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x126C0000 0x100>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 3>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
-
-	g2d: g2d@10800000 {
-		compatible = "samsung,exynos4212-g2d";
-		reg = <0x10800000 0x1000>;
-		interrupts = <0 89 0>;
-		clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
-		clock-names = "sclk_fimg2d", "fimg2d";
-		iommus = <&sysmmu_g2d>;
-		status = "disabled";
-	};
-
-	camera {
-		clocks = <&clock CLK_SCLK_CAM0>, <&clock CLK_SCLK_CAM1>,
-			 <&clock CLK_PIXELASYNCM0>, <&clock CLK_PIXELASYNCM1>;
-		clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
-
-		/* fimc_[0-3] are configured outside, under phandles */
-		fimc_lite_0: fimc-lite@12390000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x12390000 0x1000>;
-			interrupts = <0 105 0>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>;
-			clock-names = "flite";
-			iommus = <&sysmmu_fimc_lite0>;
-			status = "disabled";
-		};
-
-		fimc_lite_1: fimc-lite@123A0000 {
-			compatible = "samsung,exynos4212-fimc-lite";
-			reg = <0x123A0000 0x1000>;
-			interrupts = <0 106 0>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE1>;
-			clock-names = "flite";
-			iommus = <&sysmmu_fimc_lite1>;
-			status = "disabled";
-		};
-
-		fimc_is: fimc-is@12000000 {
-			compatible = "samsung,exynos4212-fimc-is", "simple-bus";
-			reg = <0x12000000 0x260000>;
-			interrupts = <0 90 0>, <0 95 0>;
-			power-domains = <&pd_isp>;
-			clocks = <&clock CLK_FIMC_LITE0>,
-				 <&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
-				 <&clock CLK_PPMUISPMX>,
-				 <&clock CLK_MOUT_MPLL_USER_T>,
-				 <&clock CLK_FIMC_ISP>, <&clock CLK_FIMC_DRC>,
-				 <&clock CLK_FIMC_FD>, <&clock CLK_MCUISP>,
-				 <&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
-				 <&clock CLK_DIV_MCUISP0>,
-				 <&clock CLK_DIV_MCUISP1>,
-				 <&clock CLK_UART_ISP_SCLK>,
-				 <&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
-				 <&clock CLK_ACLK400_MCUISP>,
-				 <&clock CLK_DIV_ACLK400_MCUISP>;
-			clock-names = "lite0", "lite1", "ppmuispx",
-				      "ppmuispmx", "mpll", "isp",
-				      "drc", "fd", "mcuisp",
-				      "ispdiv0", "ispdiv1", "mcuispdiv0",
-				      "mcuispdiv1", "uart", "aclk200",
-				      "div_aclk200", "aclk400mcuisp",
-				      "div_aclk400mcuisp";
-			iommus = <&sysmmu_fimc_isp>, <&sysmmu_fimc_drc>,
-				 <&sysmmu_fimc_fd>, <&sysmmu_fimc_mcuctl>;
-			iommu-names = "isp", "drc", "fd", "mcuctl";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			pmu {
-				reg = <0x10020000 0x3000>;
-			};
-
-			i2c1_isp: i2c-isp@12140000 {
-				compatible = "samsung,exynos4212-i2c-isp";
-				reg = <0x12140000 0x100>;
-				clocks = <&clock CLK_I2C1_ISP>;
-				clock-names = "i2c_isp";
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-	};
-
-	mshc_0: mmc@12550000 {
-		compatible = "samsung,exynos4412-dw-mshc";
-		reg = <0x12550000 0x1000>;
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		fifo-depth = <0x80>;
-		clocks = <&clock CLK_SDMMC4>, <&clock CLK_SCLK_MMC4>;
-		clock-names = "biu", "ciu";
-		status = "disabled";
-	};
-
-	sysmmu_g2d: sysmmu@10A40000{
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 7>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_isp: sysmmu@12260000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12260000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 2>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_ISP>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_drc: sysmmu@12270000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12270000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 3>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_DRC>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_fd: sysmmu@122A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x122A0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 4>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FD>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_mcuctl: sysmmu@122B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x122B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 5>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_ISPCX>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_lite0: sysmmu@123B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x123B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 0>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_LITE0>, <&clock CLK_FIMC_LITE0>;
-		#iommu-cells = <0>;
-	};
-
-	sysmmu_fimc_lite1: sysmmu@123C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x123C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <16 1>;
-		power-domains = <&pd_isp>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_LITE1>, <&clock CLK_FIMC_LITE1>;
-		#iommu-cells = <0>;
-	};
-};
-
-&combiner {
-	interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-		     <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-		     <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-		     <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-		     <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
-};
-
-&exynos_usbphy {
-	compatible = "samsung,exynos4x12-usb2-phy";
-	samsung,sysreg-phandle = <&sys_reg>;
-};
-
-&fimc_0 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_1 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,cam-if;
-};
-
-&fimc_2 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <4224 8192 1920 4224>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-	samsung,cam-if;
-};
-
-&fimc_3 {
-	compatible = "samsung,exynos4212-fimc";
-	samsung,pix-limits = <1920 8192 1366 1920>;
-	samsung,rotators = <0>;
-	samsung,mainscaler-ext;
-	samsung,isp-wb;
-	samsung,lcd-wb;
-};
-
-&hdmi {
-	compatible = "samsung,exynos4212-hdmi";
-};
-
-&jpeg_codec {
-	compatible = "samsung,exynos4212-jpeg";
-};
-
-&mixer {
-	compatible = "samsung,exynos4212-mixer";
-	clock-names = "mixer", "hdmi", "sclk_hdmi", "vp";
-	clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-		 <&clock CLK_SCLK_HDMI>, <&clock CLK_VP>;
-};
-
-&pinctrl_0 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x11400000 0x1000>;
-	interrupts = <0 47 0>;
-};
-
-&pinctrl_1 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x11000000 0x1000>;
-	interrupts = <0 46 0>;
-
-	wakup_eint: wakeup-interrupt-controller {
-		compatible = "samsung,exynos4210-wakeup-eint";
-		interrupt-parent = <&gic>;
-		interrupts = <0 32 0>;
-	};
-};
-
-&pinctrl_2 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x03860000 0x1000>;
-	interrupt-parent = <&combiner>;
-	interrupts = <10 0>;
-};
-
-&pinctrl_3 {
-	compatible = "samsung,exynos4x12-pinctrl";
-	reg = <0x106E0000 0x1000>;
-	interrupts = <0 72 0>;
-};
-
-&pmu_system_controller {
-	compatible = "samsung,exynos4212-pmu", "syscon";
-	clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
-			"clkout4", "clkout8", "clkout9";
-	clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
-		<&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
-		<&clock CLK_OUT_CPU>, <&clock CLK_XXTI>, <&clock CLK_XUSBXTI>;
-	#clock-cells = <1>;
-};
-
-&tmu {
-	compatible = "samsung,exynos4412-tmu";
-	interrupt-parent = <&combiner>;
-	interrupts = <2 4>;
-	reg = <0x100C0000 0x100>;
-	clocks = <&clock 383>;
-	clock-names = "tmu_apbif";
-	status = "disabled";
-};
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 110dbd4fb884..48e43b6b3213 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos5 SoC series common device tree source
  *
@@ -7,104 +8,223 @@
  * Samsung's Exynos5 SoC series device nodes are listed in this file. Particular
  * SoCs from Exynos5 series can include this file and provide values for SoCs
  * specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
+		i2c0 = &i2c_0;
+		i2c1 = &i2c_1;
+		i2c2 = &i2c_2;
+		i2c3 = &i2c_3;
 		serial0 = &serial_0;
 		serial1 = &serial_1;
 		serial2 = &serial_2;
 		serial3 = &serial_3;
 	};
 
-	chipid@10000000 {
-		compatible = "samsung,exynos4210-chipid";
-		reg = <0x10000000 0x100>;
-	};
+	soc: soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
 
-	combiner: interrupt-controller@10440000 {
-		compatible = "samsung,exynos4210-combiner";
-		#interrupt-cells = <2>;
-		interrupt-controller;
-		samsung,combiner-nr = <32>;
-		reg = <0x10440000 0x1000>;
-		interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-				<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-				<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-				<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-				<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-				<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-				<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-				<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-	};
+		chipid: chipid@10000000 {
+			compatible = "samsung,exynos4210-chipid";
+			reg = <0x10000000 0x100>;
+		};
 
-	gic: interrupt-controller@10481000 {
-		compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x10481000 0x1000>,
-			<0x10482000 0x1000>,
-			<0x10484000 0x2000>,
-			<0x10486000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
+		sromc: memory-controller@12250000 {
+			compatible = "samsung,exynos4210-srom";
+			reg = <0x12250000 0x14>;
+		};
 
-	serial_0: serial@12C00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-	};
+		combiner: interrupt-controller@10440000 {
+			compatible = "samsung,exynos4210-combiner";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			samsung,combiner-nr = <32>;
+			reg = <0x10440000 0x1000>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	serial_1: serial@12C10000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C10000 0x100>;
-		interrupts = <0 52 0>;
-	};
+		gic: interrupt-controller@10481000 {
+			compatible = "arm,gic-400", "arm,cortex-a15-gic";
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			reg = <0x10481000 0x1000>,
+				<0x10482000 0x2000>,
+				<0x10484000 0x2000>,
+				<0x10486000 0x2000>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
 
-	serial_2: serial@12C20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C20000 0x100>;
-		interrupts = <0 53 0>;
-	};
+		sysreg_system_controller: syscon@10050000 {
+			compatible = "samsung,exynos5-sysreg", "syscon";
+			reg = <0x10050000 0x5000>;
+		};
 
-	serial_3: serial@12C30000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C30000 0x100>;
-		interrupts = <0 54 0>;
-	};
+		serial_0: serial@12c00000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12c00000 0x100>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	rtc: rtc@101E0000 {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x101E0000 0x100>;
-		interrupts = <0 43 0>, <0 44 0>;
-		status = "disabled";
-	};
+		serial_1: serial@12c10000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12c10000 0x100>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	fimd: fimd@14400000 {
-		compatible = "samsung,exynos5250-fimd";
-		interrupt-parent = <&combiner>;
-		reg = <0x14400000 0x40000>;
-		interrupt-names = "fifo", "vsync", "lcd_sys";
-		interrupts = <18 4>, <18 5>, <18 6>;
-		samsung,sysreg = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		serial_2: serial@12c20000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12c20000 0x100>;
+			interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	dp: dp-controller@145B0000 {
-		compatible = "samsung,exynos5-dp";
-		reg = <0x145B0000 0x1000>;
-		interrupts = <10 3>;
-		interrupt-parent = <&combiner>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
+		serial_3: serial@12c30000 {
+			compatible = "samsung,exynos4210-uart";
+			reg = <0x12c30000 0x100>;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		i2c_0: i2c@12c60000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12c60000 0x100>;
+			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_1: i2c@12c70000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12c70000 0x100>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_2: i2c@12c80000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12c80000 0x100>;
+			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		i2c_3: i2c@12c90000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12c90000 0x100>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		pwm: pwm@12dd0000 {
+			compatible = "samsung,exynos4210-pwm";
+			reg = <0x12dd0000 0x100>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,pwm-outputs = <0>, <1>, <2>, <3>;
+			#pwm-cells = <3>;
+		};
+
+		rtc: rtc@101e0000 {
+			compatible = "samsung,s3c6410-rtc";
+			reg = <0x101e0000 0x100>;
+			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		fimd: fimd@14400000 {
+			compatible = "samsung,exynos5250-fimd";
+			interrupt-parent = <&combiner>;
+			reg = <0x14400000 0x40000>;
+			interrupt-names = "fifo", "vsync", "lcd_sys";
+			interrupts = <18 4>, <18 5>, <18 6>;
+			samsung,sysreg = <&sysreg_system_controller>;
+			status = "disabled";
+		};
+
+		dp: dp-controller@145b0000 {
+			compatible = "samsung,exynos5-dp";
+			reg = <0x145b0000 0x1000>;
+			interrupts = <10 3>;
+			interrupt-parent = <&combiner>;
+			status = "disabled";
+		};
+
+		sss: sss@10830000 {
+			compatible = "samsung,exynos4210-secss";
+			reg = <0x10830000 0x300>;
+			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		prng: rng@10830400 {
+			compatible = "samsung,exynos5250-prng";
+			reg = <0x10830400 0x200>;
+		};
+
+		trng: rng@10830600 {
+			compatible = "samsung,exynos5250-trng";
+			reg = <0x10830600 0x100>;
+		};
+
+		g2d: g2d@10850000 {
+			compatible = "samsung,exynos5250-g2d";
+			reg = <0x10850000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7e728a1b5559..d586189966da 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -1,104 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos5250 based Arndale board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5250.dtsi"
 
 / {
-	model = "Insignal Arndale evaluation board based on EXYNOS5250";
+	model = "Insignal Arndale evaluation board based on Exynos5250";
 	compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
-		bootargs = "console=ttySAC2,115200";
+		stdout-path = "serial2:115200n8";
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		menu {
+		key-menu {
 			label = "SW-TACT2";
 			gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		home {
+		key-home {
 			label = "SW-TACT3";
 			gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		up {
+		key-up {
 			label = "SW-TACT4";
 			gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_UP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		down {
+		key-down {
 			label = "SW-TACT5";
 			gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_DOWN>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "SW-TACT6";
 			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
-		wakeup {
+		key-wakeup {
 			label = "SW-TACT7";
 			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	/*
+	 * For unknown reasons HDMI-DDC does not work with Exynos I2C
+	 * controllers. Lets use software I2C over GPIO pins as a workaround.
+	 */
+	i2c_ddc: i2c-10 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c2_gpio_bus>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+	};
 
-		main_dc_reg: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "MAIN_DC";
+	panel: panel {
+		compatible = "boe,hv070wsa-100";
+		power-supply = <&vcc_3v3_reg>;
+		enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>;
+		port {
+			panel_ep: endpoint {
+				remote-endpoint = <&bridge_out_ep>;
+			};
 		};
+	};
 
-		mmc_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "VDD_33ON_2.8V";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
-			enable-active-high;
-		};
+	main_dc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "MAIN_DC";
+		regulator-always-on;
+	};
 
-		reg_hdmi_en: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "hdmi-en";
-		};
+	mmc_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_MMC";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_hdmi_en: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-en";
+		regulator-always-on;
+	};
+
+	vcc_1v2_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	vcc_1v8_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vcc_3v3_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "samsung,arndale-wm1811";
+		samsung,audio-cpu = <&i2s0>;
+		samsung,audio-codec = <&wm1811>;
 	};
 
 	fixed-rate-clocks {
@@ -113,43 +164,63 @@
 		compatible = "smsc,usb3503a";
 
 		reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-		connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
+		connect-gpios = <&gpd1 7 GPIO_ACTIVE_HIGH>;
 	};
 };
 
-&dp {
-	status = "okay";
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <4>;
+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <49152000>;
 };
 
-&fimd {
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo8_reg>;
+	vddio-supply = <&ldo10_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	samsung,burst-clock-frequency = <320000000>;
+	samsung,esc-clock-frequency = <10000000>;
 	status = "okay";
 
-	display-timings {
-		native-mode = <&timing0>;
-
-		timing0: timing@0 {
-			/* 2560x1600 DP panel */
-			clock-frequency = <50000>;
-			hactive = <2560>;
-			vactive = <1600>;
-			hfront-porch = <48>;
-			hback-porch = <80>;
-			hsync-len = <32>;
-			vback-porch = <16>;
-			vfront-porch = <8>;
-			vsync-len = <6>;
+	bridge@0 {
+		reg = <0>;
+		compatible = "toshiba,tc358764";
+		vddc-supply = <&vcc_1v2_reg>;
+		vddio-supply = <&vcc_1v8_reg>;
+		vddlvds-supply = <&vcc_3v3_reg>;
+		reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@1 {
+				reg = <1>;
+				bridge_out_ep: endpoint {
+					remote-endpoint = <&panel_ep>;
+				};
+			};
 		};
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd>;
+	status = "okay";
+	ddc = <&i2c_ddc>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	vdd_osc-supply = <&ldo10_reg>;
 	vdd_pll-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
@@ -161,11 +232,14 @@
 	samsung,i2c-max-bus-freq = <20000>;
 	samsung,i2c-slave-addr = <0x66>;
 
-	s5m8767_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
 		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s5m8767_irq>;
+		wakeup-source;
 
 		vinb1-supply = <&main_dc_reg>;
 		vinb2-supply = <&main_dc_reg>;
@@ -187,15 +261,18 @@
 		vinl8-supply = <&buck8_reg>;
 		vinl9-supply = <&buck8_reg>;
 
-		s5m8767,pmic-buck2-dvs-voltage = <1300000>;
-		s5m8767,pmic-buck3-dvs-voltage = <1100000>;
-		s5m8767,pmic-buck4-dvs-voltage = <1200000>;
 		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
-		                              <&gpd1 1 GPIO_ACTIVE_HIGH>,
-		                              <&gpd1 2 GPIO_ACTIVE_HIGH>;
+					      <&gpd1 1 GPIO_ACTIVE_HIGH>,
+					      <&gpd1 2 GPIO_ACTIVE_HIGH>;
 		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
-		                             <&gpx2 4 GPIO_ACTIVE_HIGH>,
-		                             <&gpx2 5 GPIO_ACTIVE_HIGH>;
+					     <&gpx2 4 GPIO_ACTIVE_HIGH>,
+					     <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+		s5m8767_osc: clocks {
+			compatible = "samsung,s5m8767-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s5m8767_ap", "unused1", "unused2";
+		};
 
 		regulators {
 			ldo1_reg: LDO1 {
@@ -384,7 +461,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -393,7 +470,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <912500>;
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
@@ -402,7 +479,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -411,9 +488,9 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
 				regulator-boot-on;
 				op_mode = <1>;
@@ -450,25 +527,14 @@
 	};
 };
 
-&i2c_2 {
-	status = "okay";
-
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x50>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
-};
-
 &i2c_3 {
 	status = "okay";
 
-	wm1811a@1a {
+	wm1811: audio-codec@1a {
 		compatible = "wlf,wm1811";
 		reg = <0x1a>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "MCLK1";
 
 		AVDD2-supply = <&main_dc_reg>;
 		CPVDD-supply = <&main_dc_reg>;
@@ -479,48 +545,45 @@
 		SPKVDD1-supply = <&main_dc_reg>;
 		SPKVDD2-supply = <&main_dc_reg>;
 
-		wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
-		wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+		wlf,ldo1ena-gpios = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+		wlf,ldo2ena-gpios = <&gpb0 1 GPIO_ACTIVE_HIGH>;
 	};
 };
 
 &i2c_8 {
 	status = "okay";
-
+	/* used by HDMI PHY */
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
-	samsung,i2c-slave-addr = <0x38>;
-
-	hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
 };
 
 &i2c_9 {
 	status = "okay";
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <40000>;
-	samsung,i2c-slave-addr = <0x38>;
-
-	sata_phy_i2c:sata-phy@38 {
-		compatible = "samsung,exynos-sataphy-i2c";
-		reg = <0x38>;
-	};
 };
 
 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
+	status = "okay";
+};
+
+&i2s0_bus {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;
+};
+
+&mali {
+	mali-supply = <&buck4_reg>;
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+&mixer {
+	status = "okay";
 };
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -531,11 +594,11 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
@@ -548,7 +611,16 @@
 	cap-sd-highspeed;
 };
 
+&pinctrl_0 {
+	s5m8767_irq: s5m8767-irq-pins {
+		samsung,pins = "gpx3-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
 &rtc {
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 	status = "okay";
 };
 
@@ -560,3 +632,12 @@
 	status = "okay";
 	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
 };
+
+&sata_phy_i2c {
+	status = "okay";
+};
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 886cfca044ac..48732edadff1 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos5250 SoC pin-mux and pin-config device tree source
  *
@@ -6,813 +7,827 @@
  *
  * Samsung's Exynos5250 SoC pin-mux and pin-config optiosn are listed as device
  * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@11400000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_0 {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_hs_bus: i2c2-hs-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c2_gpio_bus: i2c2-gpio-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c3_hs_bus: i2c3-hs-bus-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c4_bus: i2c4-bus-pins {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c5_bus: i2c5-bus-pins {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ac97_bus: ac97-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c6_bus: i2c6-bus-pins {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c7_bus: i2c7-bus-pins {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c0_hs_bus: i2c0-hs-bus-pins {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	i2c1_hs_bus: i2c1-hs-bus-pins {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpc3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpc3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpc3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd2_bus8: sd2-bus-width8-pins {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_clk: sd3-clk-pins {
+		samsung,pins = "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cmd: sd3-cmd-pins {
+		samsung,pins = "gpc4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_cd: sd3-cd-pins {
+		samsung,pins = "gpc4-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus1: sd3-bus-width1-pins {
+		samsung,pins = "gpc4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	sd3_bus4: sd3-bus-width4-pins {
+		samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpd0-0", "gpd0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpd0-2", "gpd0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	dp_hpd: dp-hpd-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec-pins {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd: hdmi-hpd-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+};
+
+&pinctrl_1 {
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a-pins {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_gpio_b: cam-gpio-b-pins {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus-pins {
+		samsung,pins = "gpe0-6", "gpe1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus-pins {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus-pins {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus-pins {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus-pins {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0", "gpg2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	cam_port_a: cam-port-a-pins {
+		samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
+			       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
+			       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	c2c_rxd: c2c-rxd-pins {
+		samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
+			       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
+			       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
+			       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	c2c_txd: c2c-txd-pins {
+		samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
+			       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
+			       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
+			       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
 
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd0: gpd0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_hs_bus: i2c2-hs-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_hs_bus: i2c3-hs-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_bus: i2c4-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_bus: i2c5-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		ac97_bus: ac97-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_bus: i2c6-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_bus: i2c7-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_hs_bus: i2c0-hs-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_hs_bus: i2c1-hs-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc2-3", "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc3-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc3-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc3-3", "gpc3-4", "gpc3-5", "gpc3-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus8: sd2-bus-width8 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_clk: sd3-clk {
-			samsung,pins = "gpc4-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cmd: sd3-cmd {
-			samsung,pins = "gpc4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_cd: sd3-cd {
-			samsung,pins = "gpc4-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus1: sd3-bus-width1 {
-			samsung,pins = "gpc4-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd3_bus4: sd3-bus-width4 {
-			samsung,pins = "gpc4-3", "gpc4-4", "gpc4-5", "gpc4-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpd0-0", "gpd0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpd0-2", "gpd0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13400000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph1: gph1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpe0-6", "gpe1-0";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0", "gpg2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_port_a: cam-port-a {
-			samsung,pins = "gph0-0", "gph0-1", "gph0-2", "gph0-3",
-				       "gph1-0", "gph1-1", "gph1-2", "gph1-3",
-				       "gph1-4", "gph1-5", "gph1-6", "gph1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@10d10000 {
-		gpv0: gpv0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv1: gpv1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv2: gpv2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv3: gpv3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpv4: gpv4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		c2c_rxd: c2c-rxd {
-			samsung,pins = "gpv0-0", "gpv0-1", "gpv0-2", "gpv0-3",
-				       "gpv0-4", "gpv0-5", "gpv0-6", "gpv0-7",
-				       "gpv1-0", "gpv1-1", "gpv1-2", "gpv1-3",
-				       "gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		c2c_txd: c2c-txd {
-			samsung,pins = "gpv2-0", "gpv2-1", "gpv2-2", "gpv2-3",
-				       "gpv2-4", "gpv2-5", "gpv2-6", "gpv2-7",
-				       "gpv3-0", "gpv3-1", "gpv3-2", "gpv3-3",
-				       "gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 4fe186d01f8a..bb623726ef1e 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -1,35 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5250 board device tree source
+ * Samsung SMDK5250 board device tree source
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/maxim,max77686.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "exynos5250.dtsi"
 
 / {
-	model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+	model = "Samsung SMDK5250 board based on Exynos5250";
 	compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
 
 	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
 	};
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
 	chosen {
-		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M init=/linuxrc";
+		stdout-path = "serial2:115200n8";
 	};
 
-	vdd: fixed-regulator@0 {
+	vdd: fixed-regulator-vdd {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd-supply";
 		regulator-min-microvolt = <1800000>;
@@ -37,7 +39,7 @@
 		regulator-always-on;
 	};
 
-	dbvdd: fixed-regulator@1 {
+	dbvdd: fixed-regulator-dbvdd {
 		compatible = "regulator-fixed";
 		regulator-name = "dbvdd-supply";
 		regulator-min-microvolt = <3300000>;
@@ -45,7 +47,7 @@
 		regulator-always-on;
 	};
 
-	spkvdd: fixed-regulator@2 {
+	spkvdd: fixed-regulator-spkvdd {
 		compatible = "regulator-fixed";
 		regulator-name = "spkvdd-supply";
 		regulator-min-microvolt = <5000000>;
@@ -74,10 +76,12 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &dp {
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
@@ -85,19 +89,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
 	status = "okay";
-};
-
-&ehci {
-	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
 
 	display-timings {
 		native-mode = <&timing0>;
 
-		timing0: timing@0 {
+		timing0: timing {
 			/* 1280x800 */
 			clock-frequency = <50000>;
 			hactive = <1280>;
@@ -112,8 +108,21 @@
 	};
 };
 
+&ehci {
+	samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	ddc = <&i2c_2>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
 };
 
 &i2c_0 {
@@ -122,17 +131,18 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@50 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x50>;
 	};
 
-	max77686@09 {
+	max77686: pmic@9 {
 		compatible = "maxim,max77686";
 		reg = <0x09>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77686_irq>;
+		#clock-cells = <1>;
 		wakeup-source;
 
 		voltage-regulators {
@@ -193,6 +203,7 @@
 				regulator-name = "P1.8V_LDO_OUT10";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo11_reg: LDO11 {
@@ -280,11 +291,11 @@
 	samsung,i2c-max-bus-freq = <20000>;
 
 	eeprom@51 {
-		compatible = "samsung,s524ad0xd1";
+		compatible = "samsung,s524ad0xd1", "atmel,24c128";
 		reg = <0x51>;
 	};
 
-	wm8994: wm8994@1a {
+	wm8994: audio-codec@1a {
 		compatible = "wlf,wm8994";
 		reg = <0x1a>;
 
@@ -304,50 +315,34 @@
 
 &i2c_2 {
 	status = "okay";
+	/* used by HDMI DDC */
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
 };
 
 &i2c_8 {
 	status = "okay";
+	/* used by HDMI PHY */
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
-
-	hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
 };
 
 &i2c_9 {
 	status = "okay";
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <40000>;
-	samsung,i2c-slave-addr = <0x38>;
-
-	sata_phy_i2c: sata-phy@38 {
-		compatible = "samsung,exynos-sataphy-i2c";
-		reg = <0x38>;
-	};
 };
 
 &i2s0 {
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+&mixer {
+	status = "okay";
 };
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -357,11 +352,11 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
@@ -375,6 +370,8 @@
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
 };
 
 &sata {
@@ -386,14 +383,18 @@
 	samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
 };
 
+&sata_phy_i2c {
+	status = "okay";
+};
+
 &spi_1 {
 	status = "okay";
 	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
 
-	w25q80bw@0 {
+	flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "w25x80";
+		compatible = "winbond,w25x80", "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <1000000>;
 
@@ -415,10 +416,15 @@
 };
 
 &pinctrl_0 {
-	max77686_irq: max77686-irq {
+	max77686_irq: max77686-irq-pins {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
new file mode 100644
index 000000000000..59b2cc35c37b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi
@@ -0,0 +1,718 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Snow board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5250.dtsi"
+
+/ {
+	aliases {
+		i2c104 = &i2c_104;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_3; /* WiFi */
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x80000000>;
+	};
+
+	chosen {
+		bootargs = "console=tty1";
+		stdout-path = "serial3:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key_irq &lid_irq>;
+
+		power-key {
+			label = "Power";
+			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		lid-switch {
+			label = "Lid";
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>; /* EV_SW */
+			linux,code = <0>; /* SW_LID */
+			debounce-interval = <1>;
+			wakeup-source;
+		};
+	};
+
+	vbat: vbat-fixed-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat-supply";
+		regulator-boot-on;
+	};
+
+	i2c-arbitrator {
+		compatible = "i2c-arb-gpio-challenge";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c_4>;
+
+		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+		slew-delay-us = <10>;
+		wait-retry-us = <3000>;
+		wait-free-us = <50000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
+
+		/* Use ID 104 as a hint that we're on physical bus 4 */
+		i2c_104: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			battery: sbs-battery@b {
+				compatible = "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,poll-retry-count = <1>;
+			};
+
+			cros_ec: embedded-controller@1e {
+				compatible = "google,cros-ec-i2c";
+				reg = <0x1e>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-parent = <&gpx1>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&ec_irq>;
+				wakeup-source;
+			};
+
+			power-regulator@48 {
+				compatible = "ti,tps65090";
+				reg = <0x48>;
+
+				/*
+				 * Config irq to disable internal pulls
+				 * even though we run in polling mode.
+				 */
+				pinctrl-names = "default";
+				pinctrl-0 = <&tps65090_irq>;
+
+				vsys1-supply = <&vbat>;
+				vsys2-supply = <&vbat>;
+				vsys3-supply = <&vbat>;
+				infet1-supply = <&vbat>;
+				infet2-supply = <&vbat>;
+				infet3-supply = <&vbat>;
+				infet4-supply = <&vbat>;
+				infet5-supply = <&vbat>;
+				infet6-supply = <&vbat>;
+				infet7-supply = <&vbat>;
+				vsys-l1-supply = <&vbat>;
+				vsys-l2-supply = <&vbat>;
+
+				regulators {
+					dcdc1 {
+						ti,enable-ext-control;
+					};
+					dcdc2 {
+						ti,enable-ext-control;
+					};
+					dcdc3 {
+						ti,enable-ext-control;
+					};
+					fet1: fet1 {
+						regulator-name = "vcd_led";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet2: fet2 {
+						regulator-name = "video_mid";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet3 {
+						regulator-name = "wwan_r";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet4 {
+						regulator-name = "sdcard";
+						ti,overcurrent-wait = <3>;
+					};
+					fet5 {
+						regulator-name = "camout";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					fet6: fet6 {
+						regulator-name = "lcd_vdd";
+						ti,overcurrent-wait = <3>;
+					};
+					tps65090_fet7: fet7 {
+						regulator-name = "video_mid_1a";
+						regulator-always-on;
+						ti,overcurrent-wait = <3>;
+					};
+					ldo1 {
+					};
+					ldo2 {
+					};
+				};
+
+				charger {
+					compatible = "ti,tps65090-charger";
+				};
+			};
+		};
+	};
+
+	sound {
+		samsung,i2s-controller = <&i2s0>;
+	};
+
+	usb3_vbus_reg: regulator-usb3 {
+		compatible = "regulator-fixed";
+		regulator-name = "P5.0V_USB3CON";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_en>;
+		enable-active-high;
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 1000000 0>;
+		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
+		default-brightness-level = <7>;
+		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
+		power-supply = <&fet1>;
+		pinctrl-0 = <&pwm0_out>;
+		pinctrl-names = "default";
+	};
+
+	panel: panel {
+		compatible = "auo,b116xw03";
+		power-supply = <&fet6>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&bridge_out>;
+			};
+		};
+	};
+
+	mmc3_pwrseq: mmc3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
+			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
+		clocks = <&max77686 MAX77686_CLK_PMIC>;
+		clock-names = "ext_clock";
+	};
+};
+
+&clock {
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <49152000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
+};
+
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
+&dp {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp_hpd>;
+	samsung,color-space = <0>;
+	samsung,color-depth = <1>;
+	samsung,link-rate = <0x0a>;
+	samsung,lane-count = <2>;
+	hpd-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&bridge_in>;
+			};
+		};
+	};
+};
+
+&ehci {
+	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+	status = "okay";
+	samsung,invert-vclk;
+};
+
+&hdmi {
+	status = "okay";
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_hpd_irq>;
+	ddc = <&i2c_2>;
+	hdmi-en-supply = <&tps65090_fet7>;
+	vdd-supply = <&ldo8_reg>;
+	vdd_osc-supply = <&ldo10_reg>;
+	vdd_pll-supply = <&ldo8_reg>;
+};
+
+&hdmicec {
+	status = "okay";
+};
+
+&i2c_0 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	max77686: pmic@9 {
+		compatible = "maxim,max77686";
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77686_irq>;
+		wakeup-source;
+		reg = <0x09>;
+		#clock-cells = <1>;
+
+		voltage-regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "P1.0V_LDO_OUT1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "P1.8V_LDO_OUT2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "P1.8V_LDO_OUT3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "P1.1V_LDO_OUT7";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "P1.0V_LDO_OUT8";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "P1.8V_LDO_OUT10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "P3.0V_LDO_OUT12";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "P1.8V_LDO_OUT14";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "P1.0V_LDO_OUT15";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "P1.8V_LDO_OUT16";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "P1.8V_BUCK_OUT5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "P1.35V_BUCK_OUT6";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "P2.0V_BUCK_OUT7";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "P2.85V_BUCK_OUT8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+
+	trackpad@67 {
+		reg = <0x67>;
+		compatible = "cypress,cyapa";
+		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx1>;
+		wakeup-source;
+	};
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+};
+
+&i2c_2 {
+	status = "okay";
+	/* used by HDMI DDC */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_3 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_5 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+	status = "okay";
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <66000>;
+
+	ptn3460: lvds-bridge@20 {
+		compatible = "nxp,ptn3460";
+		reg = <0x20>;
+		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
+		edid-emulation = <5>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				bridge_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				bridge_in: endpoint {
+					remote-endpoint = <&dp_out>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_8 {
+	status = "okay";
+	/* used by HDMI PHY */
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-max-bus-freq = <378000>;
+};
+
+&i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
+	status = "okay";
+};
+
+&mali {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* eMMC flash */
+&mmc_0 {
+	status = "okay";
+	non-removable;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+};
+
+/* uSD card */
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+	bus-width = <4>;
+	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
+	cap-sd-highspeed;
+};
+
+/*
+ * On Snow we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ *
+ * WiFi SDIO module
+ */
+&mmc_3 {
+	status = "okay";
+	non-removable;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <2 3>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	mmc-pwrseq = <&mmc3_pwrseq>;
+};
+
+&pinctrl_0 {
+	wifi_en: wifi-en-pins {
+		samsung,pins = "gpx0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	wifi_rst: wifi-rst-pins {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	power_key_irq: power-key-irq-pins {
+		samsung,pins = "gpx1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	ec_irq: ec-irq-pins {
+		samsung,pins = "gpx1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	tps65090_irq: tps65090-irq-pins {
+		samsung,pins = "gpx2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb3_vbus_en: usb3-vbus-en-pins {
+		samsung,pins = "gpx2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	max77686_irq: max77686-irq-pins {
+		samsung,pins = "gpx3-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lid_irq: lid-irq-pins {
+		samsung,pins = "gpx3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	arb_their_claim: arb-their-claim-pins {
+		samsung,pins = "gpe0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	arb_our_claim: arb-our-claim-pins {
+		samsung,pins = "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&sd3_clk {
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&sd3_cmd {
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+};
+
+&spi_1 {
+	status = "okay";
+	samsung,spi-src-clk = <0>;
+	num-cs = <1>;
+	cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+};
+
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd_dwc3 {
+	dr_mode = "host";
+};
+
+&usbdrd_phy {
+	vbus-supply = <&usb3_vbus_reg>;
+};
+
+#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
new file mode 100644
index 000000000000..3d32c3476e84
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Google Snow Rev 5+ board device tree source
+ *
+ * Copyright (c) 2012 Google, Inc
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *             http://www.samsung.com
+ */
+
+/dts-v1/;
+#include "exynos5250-snow-common.dtsi"
+
+/ {
+	model = "Google Snow Rev 5+";
+	compatible = "google,snow-rev5", "samsung,exynos5250",
+		"samsung,exynos5";
+	chassis-type = "laptop";
+
+	sound {
+		compatible = "google,snow-audio-max98090";
+
+		samsung,model = "Snow-I2S-MAX98090";
+		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090>, <&hdmi>;
+		};
+	};
+};
+
+&i2c_7 {
+	max98090: audio-codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		interrupt-parent = <&gpx0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max98090_irq>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&pinctrl_0 {
+	max98090_irq: max98090-irq-pins {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index b7f4122df456..906aa7aae710 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -1,701 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Google Snow board device tree source
  *
  * Copyright (c) 2012 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/clock/maxim,max77686.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/input/input.h>
-#include "exynos5250.dtsi"
+#include "exynos5250-snow-common.dtsi"
 
 / {
 	model = "Google Snow";
-	compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
-
-	aliases {
-		i2c104 = &i2c_104;
-	};
-
-	memory {
-		reg = <0x40000000 0x80000000>;
-	};
-
-	chosen {
-		bootargs = "console=tty1";
-		stdout-path = "serial3:115200n8";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&power_key_irq &lid_irq>;
-
-		power {
-			label = "Power";
-			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
-		};
-
-		lid-switch {
-			label = "Lid";
-			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
-			linux,input-type = <5>; /* EV_SW */
-			linux,code = <0>; /* SW_LID */
-			debounce-interval = <1>;
-			gpio-key,wakeup;
-		};
-	};
-
-	vbat: vbat-fixed-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat-supply";
-		regulator-boot-on;
-	};
-
-	i2c-arbitrator {
-		compatible = "i2c-arb-gpio-challenge";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&{/i2c@12CA0000}>;
-
-		our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
-		their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
-		slew-delay-us = <10>;
-		wait-retry-us = <3000>;
-		wait-free-us = <50000>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&arb_our_claim &arb_their_claim>;
-
-		/* Use ID 104 as a hint that we're on physical bus 4 */
-		i2c_104: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			battery: sbs-battery@b {
-				compatible = "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,poll-retry-count = <1>;
-			};
-
-			cros_ec: embedded-controller {
-				compatible = "google,cros-ec-i2c";
-				reg = <0x1e>;
-				interrupts = <6 IRQ_TYPE_NONE>;
-				interrupt-parent = <&gpx1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&ec_irq>;
-				wakeup-source;
-			};
-
-			power-regulator {
-				compatible = "ti,tps65090";
-				reg = <0x48>;
-
-				/*
-				 * Config irq to disable internal pulls
-				 * even though we run in polling mode.
-				 */
-				pinctrl-names = "default";
-				pinctrl-0 = <&tps65090_irq>;
-
-				vsys1-supply = <&vbat>;
-				vsys2-supply = <&vbat>;
-				vsys3-supply = <&vbat>;
-				infet1-supply = <&vbat>;
-				infet2-supply = <&vbat>;
-				infet3-supply = <&vbat>;
-				infet4-supply = <&vbat>;
-				infet5-supply = <&vbat>;
-				infet6-supply = <&vbat>;
-				infet7-supply = <&vbat>;
-				vsys-l1-supply = <&vbat>;
-				vsys-l2-supply = <&vbat>;
-
-				regulators {
-					dcdc1 {
-						ti,enable-ext-control;
-					};
-					dcdc2 {
-						ti,enable-ext-control;
-					};
-					dcdc3 {
-						ti,enable-ext-control;
-					};
-					fet1: fet1 {
-						regulator-name = "vcd_led";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet2: fet2 {
-						regulator-name = "video_mid";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet3 {
-						regulator-name = "wwan_r";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet4 {
-						regulator-name = "sdcard";
-						ti,overcurrent-wait = <3>;
-					};
-					fet5 {
-						regulator-name = "camout";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					fet6: fet6 {
-						regulator-name = "lcd_vdd";
-						ti,overcurrent-wait = <3>;
-					};
-					tps65090_fet7: fet7 {
-						regulator-name = "video_mid_1a";
-						regulator-always-on;
-						ti,overcurrent-wait = <3>;
-					};
-					ldo1 {
-					};
-					ldo2 {
-					};
-				};
-
-				charger {
-					compatible = "ti,tps65090-charger";
-				};
-			};
-		};
-	};
+	compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
+		"samsung,exynos5";
+	chassis-type = "laptop";
 
 	sound {
 		compatible = "google,snow-audio-max98095";
 
 		samsung,model = "Snow-I2S-MAX98095";
-		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98095>;
-	};
-
-	usb3_vbus_reg: regulator-usb3 {
-		compatible = "regulator-fixed";
-		regulator-name = "P5.0V_USB3CON";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&usb3_vbus_en>;
-		enable-active-high;
-	};
-
-	fixed-rate-clocks {
-		xxti {
-			compatible = "samsung,clock-xxti";
-			clock-frequency = <24000000>;
-		};
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm 0 1000000 0>;
-		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
-		default-brightness-level = <7>;
-		enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
-		power-supply = <&fet1>;
-		pinctrl-0 = <&pwm0_out>;
-		pinctrl-names = "default";
-	};
-
-	panel: panel {
-		compatible = "auo,b116xw03";
-		power-supply = <&fet6>;
-		backlight = <&backlight>;
 
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&bridge_out>;
-			};
+		cpu {
+			sound-dai = <&i2s0 0>;
 		};
-	};
-
-	mmc3_pwrseq: mmc3_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */
-			      <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */
-		clocks = <&max77686 MAX77686_CLK_PMIC>;
-		clock-names = "ext_clock";
-	};
-};
-
-&dp {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&dp_hpd>;
-	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
-	samsung,color-depth = <1>;
-	samsung,link-rate = <0x0a>;
-	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
 
-	ports {
-		port@0 {
-			dp_out: endpoint {
-				remote-endpoint = <&bridge_in>;
-			};
+		codec {
+			sound-dai = <&max98095 0>, <&hdmi>;
 		};
 	};
 };
 
-&ehci {
-	samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
-};
-
-&fimd {
-	status = "okay";
-	samsung,invert-vclk;
-};
-
-&hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&hdmi_hpd_irq>;
-	phy = <&hdmiphy>;
-	ddc = <&i2c_2>;
-	hdmi-en-supply = <&tps65090_fet7>;
-	vdd-supply = <&ldo8_reg>;
-	vdd_osc-supply = <&ldo10_reg>;
-	vdd_pll-supply = <&ldo8_reg>;
-};
-
-&i2c_0 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	max77686: max77686@09 {
-		compatible = "maxim,max77686";
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&max77686_irq>;
-		wakeup-source;
-		reg = <0x09>;
-		#clock-cells = <1>;
-
-		voltage-regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "P1.0V_LDO_OUT1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo2_reg: LDO2 {
-				regulator-name = "P1.8V_LDO_OUT2";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "P1.8V_LDO_OUT3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "P1.1V_LDO_OUT7";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "P1.0V_LDO_OUT8";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "P1.8V_LDO_OUT10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "P3.0V_LDO_OUT12";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo14_reg: LDO14 {
-				regulator-name = "P1.8V_LDO_OUT14";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "P1.0V_LDO_OUT15";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "P1.8V_LDO_OUT16";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "P1.8V_BUCK_OUT5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "P1.35V_BUCK_OUT6";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "P2.0V_BUCK_OUT7";
-				regulator-min-microvolt = <2000000>;
-				regulator-max-microvolt = <2000000>;
-				regulator-always-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "P2.85V_BUCK_OUT8";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-			};
-		};
-	};
-};
-
-&i2c_1 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	trackpad {
-		reg = <0x67>;
-		compatible = "cypress,cyapa";
-		interrupts = <2 IRQ_TYPE_NONE>;
-		interrupt-parent = <&gpx1>;
-		wakeup-source;
-	};
-};
-
-/*
- * Disabled pullups since external part has its own pullups and
- * double-pulling gets us out of spec in some cases.
- */
-&i2c2_bus {
-	samsung,pin-pud = <0>;
-};
-
-&i2c_2 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
-};
-
-&i2c_3 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_4 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
-&i2c_5 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-};
-
 &i2c_7 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <66000>;
-
-	ptn3460: lvds-bridge@20 {
-		compatible = "nxp,ptn3460";
-		reg = <0x20>;
-		powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
-		edid-emulation = <5>;
-
-		ports {
-			port@0 {
-				bridge_out: endpoint {
-					remote-endpoint = <&panel_in>;
-				};
-			};
-
-			port@1 {
-				bridge_in: endpoint {
-					remote-endpoint = <&dp_out>;
-				};
-			};
-		};
-	};
-
-	max98095: codec@11 {
+	max98095: audio-codec@11 {
 		compatible = "maxim,max98095";
 		reg = <0x11>;
-		pinctrl-0 = <&max98095_en>;
 		pinctrl-names = "default";
+		pinctrl-0 = <&max98095_en>;
+		clocks = <&pmu_system_controller 0>;
+		clock-names = "mclk";
+		#sound-dai-cells = <1>;
 	};
 };
 
-&i2c_8 {
-	status = "okay";
-	samsung,i2c-sda-delay = <100>;
-	samsung,i2c-max-bus-freq = <378000>;
-
-	hdmiphy: hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
-};
-
-&i2s0 {
-	status = "okay";
-};
-
-&mmc_0 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
-	bus-width = <8>;
-	cap-mmc-highspeed;
-};
-
-&mmc_2 {
-	status = "okay";
-	num-slots = <1>;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
-	bus-width = <4>;
-	wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
-	cap-sd-highspeed;
-};
-
-/*
- * On Snow we've got SIP WiFi and so can keep drive strengths low to
- * reduce EMI.
- */
-&mmc_3 {
-	status = "okay";
-	num-slots = <1>;
-	broken-cd;
-	cap-sdio-irq;
-	keep-power-in-suspend;
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>;
-	bus-width = <4>;
-	cap-sd-highspeed;
-	mmc-pwrseq = <&mmc3_pwrseq>;
-};
-
 &pinctrl_0 {
-	wifi_en: wifi-en {
-		samsung,pins = "gpx0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	wifi_rst: wifi-rst {
-		samsung,pins = "gpx0-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	power_key_irq: power-key-irq {
-		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	ec_irq: ec-irq {
-		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	max98095_en: max98095-en {
+	max98095_en: max98095-en-pins {
 		samsung,pins = "gpx1-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
-	};
-
-	tps65090_irq: tps65090-irq {
-		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	usb3_vbus_en: usb3-vbus-en {
-		samsung,pins = "gpx2-7";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	max77686_irq: max77686-irq {
-		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	lid_irq: lid-irq {
-		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&pinctrl_1 {
-	arb_their_claim: arb-their-claim {
-		samsung,pins = "gpe0-4";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
-
-	arb_our_claim: arb-our-claim {
-		samsung,pins = "gpf0-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&sd3_bus4 {
-	samsung,pin-drv = <0>;
-};
-
-&sd3_clk {
-	samsung,pin-drv = <0>;
 };
-
-&sd3_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
-};
-
-&spi_1 {
-	status = "okay";
-	samsung,spi-src-clk = <0>;
-	num-cs = <1>;
-};
-
-&usbdrd_dwc3 {
-	dr_mode = "host";
-};
-
-&usbdrd_phy {
-	vbus-supply = <&usb3_vbus_reg>;
-};
-
-#include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250-spring.dts b/arch/arm/boot/dts/exynos5250-spring.dts
index d03f9b8d376d..c12bb17631b7 100644
--- a/arch/arm/boot/dts/exynos5250-spring.dts
+++ b/arch/arm/boot/dts/exynos5250-spring.dts
@@ -1,15 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Google Spring board device tree source
  *
  * Copyright (c) 2013 Google, Inc
  * Copyright (c) 2014 SUSE LINUX Products GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
@@ -18,11 +16,18 @@
 / {
 	model = "Google Spring";
 	compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+	chassis-type = "laptop";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_1;
+	};
+
 	chosen {
 		bootargs = "console=tty1";
 		stdout-path = "serial3:115200n8";
@@ -33,11 +38,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq>, <&lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -46,7 +51,7 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -65,17 +70,19 @@
 	};
 };
 
+&cpu0 {
+	cpu0-supply = <&buck2_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <1>;
-	samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
 };
 
 &ehci {
@@ -88,10 +95,10 @@
 };
 
 &hdmi {
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
-	phy = <&hdmiphy>;
 	ddc = <&i2c_2>;
 	hdmi-en-supply = <&ldo8_reg>;
 	vdd-supply = <&ldo8_reg>;
@@ -104,22 +111,22 @@
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <378000>;
 
-	s5m8767-pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s5m8767-pmic";
 		reg = <0x66>;
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_NONE>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
 		wakeup-source;
 
 		s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
-		                              <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
-		                              <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+					      <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+					      <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
 
 		s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
-		                             <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
-		                             <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+					     <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+					     <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
 
 		/*
 		 * The following arrays of DVS voltages are not used, since we are
@@ -127,26 +134,26 @@
 		 * to please the driver.
 		 */
 		s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
-		                                 <1250000>, <1200000>,
-		                                 <1150000>, <1100000>,
-		                                 <1000000>, <950000>;
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
 
 		s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
-		                                 <1100000>, <1100000>,
-		                                 <1000000>, <1000000>,
-		                                 <1000000>, <1000000>;
+						 <1100000>, <1100000>,
+						 <1000000>, <1000000>,
+						 <1000000>, <1000000>;
 
 		s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
-		                                 <1200000>, <1200000>,
-		                                 <1200000>, <1200000>,
-		                                 <1200000>, <1200000>;
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
 
-		clocks {
+		s5m8767_osc: clocks {
 			compatible = "samsung,s5m8767-clk";
 			#clock-cells = <1>;
 			clock-output-names = "en32khz_ap",
-			                     "en32khz_cp",
-			                     "en32khz_bt";
+					     "en32khz_cp",
+					     "en32khz_bt";
 		};
 
 		regulators {
@@ -354,18 +361,14 @@
  * double-pulling gets us out of spec in some cases.
  */
 &i2c2_bus {
-	samsung,pin-pud = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 };
 
 &i2c_2 {
 	status = "okay";
+	/* used by HDMI DDC */
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
 };
 
 &i2c_3 {
@@ -379,7 +382,7 @@
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
 
-	cros_ec: embedded-controller {
+	cros_ec: embedded-controller@1e {
 		compatible = "google,cros-ec-i2c";
 		reg = <0x1e>;
 		interrupts = <6 IRQ_TYPE_NONE>;
@@ -409,27 +412,21 @@
 
 &i2c_8 {
 	status = "okay";
+	/* used by HDMI PHY */
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <378000>;
-
-	hdmiphy: hdmiphy@38 {
-		compatible = "samsung,exynos4212-hdmiphy";
-		reg = <0x38>;
-	};
 };
 
 &i2s0 {
 	status = "okay";
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+&mixer {
+	status = "okay";
 };
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -439,6 +436,7 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 };
 
 /*
@@ -447,7 +445,6 @@
  */
 &mmc_1 {
 	status = "okay";
-	num-slots = <1>;
 	broken-cd;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -460,94 +457,100 @@
 };
 
 &pinctrl_0 {
-	s5m8767_dvs: s5m8767-dvs {
+	s5m8767_dvs: s5m8767-dvs-pins {
 		samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp-hpd-gpio {
+	dp_hpd_gpio: dp-hpd-pins {
 		samsung,pins = "gpc3-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-3";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_ds: s5m8767-ds {
+	s5m8767_ds: s5m8767-ds-pins {
 		samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	s5m8767_irq: s5m8767-irq {
+	s5m8767_irq: s5m8767-irq-pins {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-5";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
-	hsic_reset: hsic-reset {
+	hsic_reset: hsic-reset-pins {
 		samsung,pins = "gpe1-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 };
 
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s5m8767_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
 &sd1_bus4 {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cd {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_clk {
-	samsung,pin-drv = <0>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &sd1_cmd {
-	samsung,pin-pud = <3>;
-	samsung,pin-drv = <0>;
+	samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 };
 
 &spi_1 {
@@ -556,4 +559,9 @@
 	num-cs = <1>;
 };
 
+&usbdrd {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 #include "cros-ec-keyboard.dtsi"
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index bf9bee67c416..1a4c6c028d03 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -1,25 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5250 SoC device tree source
+ * Samsung Exynos5250 SoC device tree source
  *
  * Copyright (c) 2012 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
- * EXYNOS5250 based board files can include this file and provide
+ * Samsung Exynos5250 SoC device nodes are listed in this file.
+ * Exynos5250 based board files can include this file and provide
  * values for board specfic bindings.
  *
  * Note: This file does not include device nodes for all the controllers in
- * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * Exynos5250 SoC. As device tree coverage for Exynos5250 increases,
  * additional nodes can be added to this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 #include <dt-bindings/clock/exynos5250.h>
 #include "exynos5.dtsi"
-#include "exynos5250-pinctrl.dtsi"
 #include "exynos4-cpu-thermal.dtsi"
 #include <dt-bindings/clock/exynos-audss-clk.h>
 
@@ -34,14 +30,6 @@
 		gsc1 = &gsc_1;
 		gsc2 = &gsc_2;
 		gsc3 = &gsc_3;
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
-		mshc3 = &mmc_3;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
 		i2c4 = &i2c_4;
 		i2c5 = &i2c_5;
 		i2c6 = &i2c_6;
@@ -58,966 +46,1073 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
 		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
-			clock-frequency = <1700000000>;
-			cooling-min-level = <15>;
-			cooling-max-level = <9>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
 			#cooling-cells = <2>; /* min followed by max */
 		};
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <1>;
-			clock-frequency = <1700000000>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x30000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x30000>;
+	cpu0_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <925000>;
+			clock-latency-ns = <140000>;
 		};
-
-		smp-sysram@2f000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x2f000 0x1000>;
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <1000000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <1012500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1050000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1075000>;
+			clock-latency-ns = <140000>;
+			opp-suspend;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1100000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1125000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1150000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1200000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1225000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1250000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1300000>;
+			clock-latency-ns = <140000>;
 		};
 	};
 
-	pd_gsc: gsc-power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-	};
-
-	pd_mfc: mfc-power-domain@10044040 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044040 0x20>;
-		#power-domain-cells = <0>;
+	pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>, <22 4>;
 	};
 
-	pd_disp1: disp1-power-domain@100440A0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440A0 0x20>;
-		#power-domain-cells = <0>;
-	};
+	soc: soc {
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x30000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x30000>;
 
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5250-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5250-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
-			 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
+			smp-sram@2f000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x2f000 0x1000>;
+			};
+		};
 
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		/* Unfortunately we need this since some versions of U-Boot
-		 * on Exynos don't set the CNTFRQ register, so we need the
-		 * value from DT.
-		 */
-		clock-frequency = <24000000>;
-	};
+		pd_gsc: power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+			label = "GSC";
+		};
 
-	mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0 0>, <1 0>, <2 0>, <3 0>,
-			     <4 0>, <5 0>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <2>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0x0 0 &combiner 23 3>,
-					<0x1 0 &combiner 23 4>,
-					<0x2 0 &combiner 25 2>,
-					<0x3 0 &combiner 25 3>,
-					<0x4 0 &gic 0 120 0>,
-					<0x5 0 &gic 0 121 0>;
+		pd_mfc: power-domain@10044040 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044040 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
 		};
-	};
 
-	pmu {
-		compatible = "arm,cortex-a15-pmu";
-		interrupt-parent = <&combiner>;
-		interrupts = <1 2>, <22 4>;
-	};
+		pd_g3d: power-domain@10044060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044060 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
 
-	pinctrl_0: pinctrl@11400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x11400000 0x1000>;
-		interrupts = <0 46 0>;
+		pd_disp1: power-domain@100440a0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440a0 0x20>;
+			#power-domain-cells = <0>;
+			label = "DISP1";
+		};
 
-		wakup_eint: wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+		pd_mau: power-domain@100440c0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440c0 0x20>;
+			#power-domain-cells = <0>;
+			label = "MAU";
 		};
-	};
 
-	pinctrl_1: pinctrl@13400000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
-	};
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5250-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
+		};
 
-	pinctrl_2: pinctrl@10d10000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x10d10000 0x1000>;
-		interrupts = <0 50 0>;
-	};
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5250-audss-clock";
+			reg = <0x03810000 0x0c>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+			power-domains = <&pd_mau>;
+		};
 
-	pinctrl_3: pinctrl@03860000 {
-		compatible = "samsung,exynos5250-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
+		timer@101c0000 {
+			compatible = "samsung,exynos5250-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x101c0000 0x800>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+			clock-names = "fin_pll", "mct";
+			interrupts-extended = <&combiner 23 3>,
+					      <&combiner 23 4>,
+					      <&combiner 25 2>,
+					      <&combiner 25 3>,
+					      <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5250-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+		pinctrl_0: pinctrl@11400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x11400000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
+			wakup_eint: wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 
-	watchdog@101D0000 {
-		compatible = "samsung,exynos5250-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		pinctrl_1: pinctrl@13400000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	g2d@10850000 {
-		compatible = "samsung,exynos5250-g2d";
-		reg = <0x10850000 0x1000>;
-		interrupts = <0 91 0>;
-		clocks = <&clock CLK_G2D>;
-		clock-names = "fimg2d";
-		iommus = <&sysmmu_g2d>;
-	};
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v6";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		power-domains = <&pd_mfc>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		pinctrl_3: pinctrl@3860000 {
+			compatible = "samsung,exynos5250-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_mau>;
+		};
 
-	tmu: tmu@10060000 {
-		compatible = "samsung,exynos5250-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5250-pmu", "simple-mfd", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
 
-	thermal-zones {
-		cpu_thermal: cpu-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tmu 0>;
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5250-dp-video-phy";
+				#phy-cells = <0>;
+			};
 
-			cooling-maps {
-				map0 {
-				     /* Corresponds to 800MHz at freq_table */
-				     cooling-device = <&cpu0 9 9>;
-				};
-				map1 {
-				     /* Corresponds to 200MHz at freq_table */
-				     cooling-device = <&cpu0 15 15>;
-			       };
-		       };
+			mipi_phy: mipi-phy {
+				compatible = "samsung,s5pv210-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
-	};
 
-	sata: sata@122F0000 {
-		compatible = "snps,dwc-ahci";
-		samsung,sata-freq = <66>;
-		reg = <0x122F0000 0x1ff>;
-		interrupts = <0 115 0>;
-		clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
-		clock-names = "sata", "sclk_sata";
-		phys = <&sata_phy>;
-		phy-names = "sata-phy";
-		status = "disabled";
-	};
+		watchdog@101d0000 {
+			compatible = "samsung,exynos5250-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_WDT>;
+			clock-names = "watchdog";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+		};
 
-	sata_phy: sata-phy@12170000 {
-		compatible = "samsung,exynos5250-sata-phy";
-		reg = <0x12170000 0x1ff>;
-		clocks = <&clock CLK_SATA_PHYCTRL>;
-		clock-names = "sata_phyctrl";
-		#phy-cells = <0>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v6";
+			reg = <0x11000000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_mfc>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
+		};
 
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		rotator: rotator@11c00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11c00000 0x64>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		mali: gpu@11800000 {
+			compatible = "samsung,exynos5250-mali", "arm,mali-t604";
+			reg = <0x11800000 0x5000>;
+			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&clock CLK_G3D>;
+			clock-names = "core";
+			operating-points-v2 = <&gpu_opp_table>;
+			power-domains = <&pd_g3d>;
+			status = "disabled";
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					opp-microvolt = <925000>;
+				};
+				opp-160000000 {
+					opp-hz = /bits/ 64 <160000000>;
+					opp-microvolt = <925000>;
+				};
+				opp-266000000 {
+					opp-hz = /bits/ 64 <266000000>;
+					opp-microvolt = <1025000>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <1075000>;
+				};
+				opp-400000000 {
+					opp-hz = /bits/ 64 <400000000>;
+					opp-microvolt = <1125000>;
+				};
+				opp-450000000 {
+					opp-hz = /bits/ 64 <450000000>;
+					opp-microvolt = <1150000>;
+				};
+				opp-533000000 {
+					opp-hz = /bits/ 64 <533000000>;
+					opp-microvolt = <1250000>;
+				};
+			};
+		};
 
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		tmu: tmu@10060000 {
+			compatible = "samsung,exynos5250-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
 
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		sata: sata@122f0000 {
+			compatible = "snps,dwc-ahci";
+			reg = <0x122f0000 0x1ff>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
+			clock-names = "sata", "pclk";
+			phys = <&sata_phy>;
+			phy-names = "sata-phy";
+			ports-implemented = <0x1>;
+			status = "disabled";
+		};
 
-	i2c_4: i2c@12CA0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CA0000 0x100>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C4>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_bus>;
-		status = "disabled";
-	};
+		sata_phy: sata-phy@12170000 {
+			compatible = "samsung,exynos5250-sata-phy";
+			reg = <0x12170000 0x1ff>;
+			clocks = <&clock CLK_SATA_PHYCTRL>;
+			clock-names = "sata_phyctrl";
+			#phy-cells = <0>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	i2c_5: i2c@12CB0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CB0000 0x100>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C5>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_bus>;
-		status = "disabled";
-	};
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		i2c_4: i2c@12ca0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12ca0000 0x100>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C4>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c4_bus>;
+			status = "disabled";
+		};
 
-	i2c_6: i2c@12CC0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CC0000 0x100>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C6>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_bus>;
-		status = "disabled";
-	};
+		i2c_5: i2c@12cb0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12cb0000 0x100>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C5>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c5_bus>;
+			status = "disabled";
+		};
 
-	i2c_7: i2c@12CD0000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12CD0000 0x100>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C7>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_bus>;
-		status = "disabled";
-	};
+		i2c_6: i2c@12cc0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12cc0000 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C6>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c6_bus>;
+			status = "disabled";
+		};
 
-	i2c_8: i2c@12CE0000 {
-		compatible = "samsung,s3c2440-hdmiphy-i2c";
-		reg = <0x12CE0000 0x1000>;
-		interrupts = <0 64 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C_HDMI>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		i2c_7: i2c@12cd0000 {
+			compatible = "samsung,s3c2440-i2c";
+			reg = <0x12cd0000 0x100>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C7>;
+			clock-names = "i2c";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c7_bus>;
+			status = "disabled";
+		};
 
-	i2c_9: i2c@121D0000 {
-                compatible = "samsung,exynos5-sata-phy-i2c";
-                reg = <0x121D0000 0x100>;
-                #address-cells = <1>;
-                #size-cells = <0>;
-		clocks = <&clock CLK_SATA_PHYI2C>;
-		clock-names = "i2c";
-		status = "disabled";
-	};
+		i2c_8: i2c@12ce0000 {
+			compatible = "samsung,s3c2440-hdmiphy-i2c";
+			reg = <0x12ce0000 0x1000>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_I2C_HDMI>;
+			clock-names = "i2c";
+			status = "disabled";
+
+			hdmiphy: hdmi-phy@38 {
+				compatible = "samsung,exynos4212-hdmiphy";
+				reg = <0x38>;
+			};
+		};
 
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 66 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-	};
+		i2c_9: i2c@121d0000 {
+			compatible = "samsung,exynos5-sata-phy-i2c";
+			reg = <0x121d0000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SATA_PHYI2C>;
+			clock-names = "i2c";
+			status = "disabled";
+
+			sata_phy_i2c: sata-phy-i2c@38 {
+				compatible = "samsung,exynos-sataphy-i2c";
+				reg = <0x38>;
+				status = "disabled";
+			};
+		};
 
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 67 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-	};
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d20000 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 5>, <&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+		};
 
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		status = "disabled";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-	};
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d30000 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 5>, <&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x1000>;
-		clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			status = "disabled";
+			reg = <0x12d40000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7>, <&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x1000>;
-		clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x1000>;
+			clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x1000>;
+			clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	mmc_3: mmc@12230000 {
-		compatible = "samsung,exynos5250-dw-mshc";
-		reg = <0x12230000 0x1000>;
-		interrupts = <0 78 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x80>;
-		status = "disabled";
-	};
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	i2s0: i2s@03830000 {
-		compatible = "samsung,s5pv210-i2s";
-		status = "disabled";
-		reg = <0x03830000 0x100>;
-		dmas = <&pdma0 10
-			&pdma0 9
-			&pdma0 8>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-	};
+		mmc_3: mmc@12230000 {
+			compatible = "samsung,exynos5250-dw-mshc";
+			reg = <0x12230000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x80>;
+			status = "disabled";
+		};
 
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-	};
+		i2s0: i2s@3830000 {
+			compatible = "samsung,s5pv210-i2s";
+			status = "disabled";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10>,
+				<&pdma0 9>,
+				<&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			power-domains = <&pd_mau>;
+			#clock-cells = <1>;
+			#sound-dai-cells = <1>;
+		};
 
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,s3c6410-i2s";
-		status = "disabled";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-	};
+		i2s1: i2s@12d60000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12d60000 0x100>;
+			dmas = <&pdma1 12>,
+				<&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			power-domains = <&pd_mau>;
+			#sound-dai-cells = <1>;
+		};
 
-	usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USB3>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
+		i2s2: i2s@12d70000 {
+			compatible = "samsung,s3c6410-i2s";
+			status = "disabled";
+			reg = <0x12d70000 0x100>;
+			dmas = <&pdma0 12>,
+				<&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			power-domains = <&pd_mau>;
+			#sound-dai-cells = <1>;
+		};
 
-		usbdrd_dwc3: dwc3 {
-			compatible = "synopsys,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		usbdrd: usb@12000000 {
+			compatible = "samsung,exynos5250-dwusb3";
+			clocks = <&clock CLK_USB3>;
+			clock-names = "usbdrd30";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000000 0x10000>;
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+			};
 		};
-	};
 
-	usbdrd_phy: phy@12100000 {
-		compatible = "samsung,exynos5250-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
+		usbdrd_phy: phy@12100000 {
+			compatible = "samsung,exynos5250-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+		};
 
-	ehci: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
+		ehci: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
 			phys = <&usb2_phy_gen 1>;
+			phy-names = "host";
 		};
-	};
 
-	ohci: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
+		ohci: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
 
-		clocks = <&clock CLK_USB2>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
+			clocks = <&clock CLK_USB2>;
+			clock-names = "usbhost";
 			phys = <&usb2_phy_gen 1>;
+			phy-names = "host";
 		};
-	};
 
-	usb2_phy_gen: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
-
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
+		usb2_phy_gen: phy@12130000 {
+			compatible = "samsung,exynos5250-usb2-phy";
+			reg = <0x12130000 0x100>;
+			clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>;
+			clock-names = "phy", "ref";
+			#phy-cells = <1>;
+			samsung,sysreg-phandle = <&sysreg_system_controller>;
+			samsung,pmureg-phandle = <&pmu_system_controller>;
+		};
 
-		pdma0: pdma@121A0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
+			reg = <0x121a0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121B0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
+			reg = <0x121b0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11C10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
+			reg = <0x11c10000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
-	};
 
-	gsc_0:  gsc@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc0>;
-	};
+		gsc_0: gsc@13e00000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc0>;
+		};
 
-	gsc_1:  gsc@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc1>;
-	};
+		gsc_1: gsc@13e10000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc1>;
+		};
 
-	gsc_2:  gsc@13e20000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e20000 0x1000>;
-		interrupts = <0 87 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL2>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc2>;
-	};
+		gsc_2: gsc@13e20000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e20000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL2>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc2>;
+		};
 
-	gsc_3:  gsc@13e30000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e30000 0x1000>;
-		interrupts = <0 88 0>;
-		power-domains = <&pd_gsc>;
-		clocks = <&clock CLK_GSCL3>;
-		clock-names = "gscl";
-		iommu = <&sysmmu_gsc3>;
-	};
+		gsc_3: gsc@13e30000 {
+			compatible = "samsung,exynos5250-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e30000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&pd_gsc>;
+			clocks = <&clock CLK_GSCL3>;
+			clock-names = "gscl";
+			iommus = <&sysmmu_gsc3>;
+		};
 
-	hdmi: hdmi {
-		compatible = "samsung,exynos4212-hdmi";
-		reg = <0x14530000 0x70000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-				"sclk_hdmiphy", "mout_hdmi";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-	};
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos4212-hdmi";
+			reg = <0x14530000 0x70000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+					"sclk_hdmiphy", "mout_hdmi";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			phy = <&hdmiphy>;
+			#sound-dai-cells = <0>;
+			status = "disabled";
+		};
 
-	mixer {
-		compatible = "samsung,exynos5250-mixer";
-		reg = <0x14450000 0x10000>;
-		power-domains = <&pd_disp1>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		iommus = <&sysmmu_tv>;
-	};
+		hdmicec: cec@101b0000 {
+			compatible = "samsung,s5p-cec";
+			reg = <0x101b0000 0x200>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI_CEC>;
+			clock-names = "hdmicec";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			hdmi-phandle = <&hdmi>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_cec>;
+			status = "disabled";
+		};
 
-	dp_phy: video-phy@10040720 {
-		compatible = "samsung,exynos5250-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
+		mixer: mixer@14450000 {
+			compatible = "samsung,exynos5250-mixer";
+			reg = <0x14450000 0x10000>;
+			power-domains = <&pd_disp1>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			iommus = <&sysmmu_tv>;
+			status = "disabled";
+		};
 
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v1";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_ADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		dsi_0: dsi@14500000 {
+			compatible = "samsung,exynos4210-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			samsung,power-domain = <&pd_disp1>;
+			phys = <&mipi_phy 3>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "sclk_mipi";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
 
-	sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
+		adc: adc@12d10000 {
+			compatible = "samsung,exynos-adc-v1";
+			reg = <0x12d10000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+		};
 
-	sysmmu_g2d: sysmmu@10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_g2d: sysmmu@10a60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10a60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_r: sysmmu@11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_r: sysmmu@11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_l: sysmmu@11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		power-domains = <&pd_mfc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_l: sysmmu@11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			power-domains = <&pd_mfc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_rotator: sysmmu@11D40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11D40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_rotator: sysmmu@11d40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11d40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg: sysmmu@11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg: sysmmu@11f20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11f20000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_isp: sysmmu@13260000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13260000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ISP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_isp: sysmmu@13260000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13260000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ISP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_drc: sysmmu@13270000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13270000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DRC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_drc: sysmmu@13270000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13270000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DRC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_fd: sysmmu@132A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132A0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_FD>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_fd: sysmmu@132a0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132a0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_FD>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scc: sysmmu@13280000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13280000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 2>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scc: sysmmu@13280000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13280000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 2>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_scp: sysmmu@13290000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13290000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_SCP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_scp: sysmmu@13290000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13290000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_SCP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_mcuctl: sysmmu@132B0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132B0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_MCU>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_mcuctl: sysmmu@132b0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132b0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_MCU>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_odc: sysmmu@132C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <11 0>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_ODC>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_odc: sysmmu@132c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132c0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <11 0>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_ODC>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis0: sysmmu@132D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <10 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis0: sysmmu@132d0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132d0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <10 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_dis1: sysmmu@132E0000{
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <9 4>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_DIS1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_dis1: sysmmu@132e0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132e0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <9 4>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_DIS1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_3dnr: sysmmu@132F0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x132F0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <5 6>;
-		clock-names = "sysmmu";
-		clocks = <&clock CLK_SMMU_FIMC_3DNR>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_3dnr: sysmmu@132f0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x132f0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <5 6>;
+			clock-names = "sysmmu";
+			clocks = <&clock CLK_SMMU_FIMC_3DNR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite0: sysmmu@13C40000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C40000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite0: sysmmu@13c40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13c40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_fimc_lite1: sysmmu@13C50000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13C50000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 1>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimc_lite1: sysmmu@13c50000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13c50000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 1>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc0: sysmmu@13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc0: sysmmu@13e80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13e80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc1: sysmmu@13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc1: sysmmu@13e90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13e90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc2: sysmmu@13EA0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EA0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 4>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gsc2: sysmmu@13ea0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13ea0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 4>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gsc3: sysmmu@13EB0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13EB0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 6>;
-		power-domains = <&pd_gsc>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
-		#iommu-cells = <0>;
+		sysmmu_gsc3: sysmmu@13eb0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13eb0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 6>;
+			power-domains = <&pd_gsc>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_fimd1: sysmmu@14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
+			#iommu-cells = <0>;
+		};
+
+		sysmmu_tv: sysmmu@14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			power-domains = <&pd_disp1>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
+			#iommu-cells = <0>;
+		};
 	};
 
-	sysmmu_fimd1: sysmmu@14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>;
-		#iommu-cells = <0>;
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Unfortunately we need this since some versions
+		 * of U-Boot on Exynos don't set the CNTFRQ register,
+		 * so we need the value from DT.
+		 */
+		clock-frequency = <24000000>;
 	};
+};
 
-	sysmmu_tv: sysmmu@14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		power-domains = <&pd_disp1>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>;
-		#iommu-cells = <0>;
+&cpu_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+	thermal-sensors = <&tmu>;
+
+	cooling-maps {
+		map0 {
+			/* Corresponds to 800MHz at freq_table */
+			cooling-device = <&cpu0 9 9>, <&cpu1 9 9>;
+		};
+		map1 {
+			/* Corresponds to 200MHz at freq_table */
+			cooling-device = <&cpu0 15 15>,
+					 <&cpu1 15 15>;
+		};
 	};
 };
 
@@ -1036,6 +1131,51 @@
 	iommus = <&sysmmu_fimd1>;
 };
 
+&g2d {
+	iommus = <&sysmmu_g2d>;
+	clocks = <&clock CLK_G2D>;
+	clock-names = "fimg2d";
+	status = "okay";
+};
+
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&prng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
@@ -1046,19 +1186,40 @@
 &serial_0 {
 	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 13>, <&pdma0 14>;
+	dma-names = "rx", "tx";
 };
 
 &serial_1 {
 	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 15>, <&pdma1 16>;
+	dma-names = "rx", "tx";
 };
 
 &serial_2 {
 	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 15>, <&pdma0 16>;
+	dma-names = "rx", "tx";
 };
 
 &serial_3 {
 	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 17>, <&pdma1 18>;
+	dma-names = "rx", "tx";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
 };
+
+&trng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+#include "exynos5250-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
index f6ee55ea0708..43e4a541f479 100644
--- a/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5260-pinctrl.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos5260 SoC pin-mux and pin-config device tree source
  *
@@ -6,18 +7,12 @@
  *
  * Samsung's Exynos5260 SoC pin-mux and pin-config options are listed as device
  * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
-#define PIN_PULL_NONE	0
-#define PIN_PULL_DOWN	1
-#define PIN_PULL_UP	3
+#include "exynos-pinctrl.h"
 
 &pinctrl_0 {
-	gpa0: gpa0 {
+	gpa0: gpa0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -25,7 +20,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa1: gpa1 {
+	gpa1: gpa1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -33,7 +28,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpa2: gpa2 {
+	gpa2: gpa2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -41,7 +36,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb0: gpb0 {
+	gpb0: gpb0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -49,7 +44,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb1: gpb1 {
+	gpb1: gpb1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -57,7 +52,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb2: gpb2 {
+	gpb2: gpb2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -65,7 +60,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb3: gpb3 {
+	gpb3: gpb3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -73,7 +68,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb4: gpb4 {
+	gpb4: gpb4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -81,7 +76,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpb5: gpb5 {
+	gpb5: gpb5-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -89,7 +84,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd0: gpd0 {
+	gpd0: gpd0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -97,7 +92,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd1: gpd1 {
+	gpd1: gpd1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -105,7 +100,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpd2: gpd2 {
+	gpd2: gpd2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -113,7 +108,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe0: gpe0 {
+	gpe0: gpe0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -121,7 +116,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpe1: gpe1 {
+	gpe1: gpe1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -129,7 +124,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf0: gpf0 {
+	gpf0: gpf0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -137,7 +132,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpf1: gpf1 {
+	gpf1: gpf1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -145,7 +140,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpk0: gpk0 {
+	gpk0: gpk0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -153,23 +148,39 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx0: gpx0 {
+	gpx0: gpx0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
 		interrupt-controller;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
-	gpx1: gpx1 {
+	gpx1: gpx1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
 		interrupt-controller;
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <2>;
 	};
 
-	gpx2: gpx2 {
+	gpx2: gpx2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -177,7 +188,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpx3: gpx3 {
+	gpx3: gpx3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -185,224 +196,224 @@
 		#interrupt-cells = <2>;
 	};
 
-	uart0_data: uart0-data {
+	uart0_data: uart0-data-pins {
 		samsung,pins = "gpa0-0", "gpa0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart0_fctl: uart0-fctl {
+	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gpa0-2", "gpa0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_data: uart1-data {
+	uart1_data: uart1-data-pins {
 		samsung,pins = "gpa1-0", "gpa1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart1_fctl: uart1-fctl {
+	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gpa1-2", "gpa1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	uart2_data: uart2-data {
+	uart2_data: uart2-data-pins {
 		samsung,pins = "gpa1-4", "gpa1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi0_bus: spi0-bus {
+	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpa2-0", "gpa2-2", "gpa2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi1_bus: spi1-bus {
+	spi1_bus: spi1-bus-pins {
 		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	usb3_vbus0_en: usb3-vbus0-en {
+	usb3_vbus0_en: usb3-vbus0-en-pins {
 		samsung,pins = "gpa2-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2s1_bus: i2s1-bus {
+	i2s1_bus: i2s1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	pcm1_bus: pcm1-bus {
+	pcm1_bus: pcm1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
 				"gpb0-4";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spdif1_bus: spdif1-bus {
+	spdif1_bus: spdif1-bus-pins {
 		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2";
-		samsung,pin-function = <4>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	spi2_bus: spi2-bus {
+	spi2_bus: spi2-bus-pins {
 		samsung,pins = "gpb1-0", "gpb1-2", "gpb1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c0_hs_bus: i2c0-hs-bus {
+	i2c0_hs_bus: i2c0-hs-bus-pins {
 		samsung,pins = "gpb3-0", "gpb3-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c1_hs_bus: i2c1-hs-bus {
+	i2c1_hs_bus: i2c1-hs-bus-pins {
 		samsung,pins = "gpb3-2", "gpb3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c2_hs_bus: i2c2-hs-bus {
+	i2c2_hs_bus: i2c2-hs-bus-pins {
 		samsung,pins = "gpb3-4", "gpb3-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c3_hs_bus: i2c3-hs-bus {
+	i2c3_hs_bus: i2c3-hs-bus-pins {
 		samsung,pins = "gpb3-6", "gpb3-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c4_bus: i2c4-bus {
+	i2c4_bus: i2c4-bus-pins {
 		samsung,pins = "gpb4-0", "gpb4-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c5_bus: i2c5-bus {
+	i2c5_bus: i2c5-bus-pins {
 		samsung,pins = "gpb4-2", "gpb4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c6_bus: i2c6-bus {
+	i2c6_bus: i2c6-bus-pins {
 		samsung,pins = "gpb4-4", "gpb4-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c7_bus: i2c7-bus {
+	i2c7_bus: i2c7-bus-pins {
 		samsung,pins = "gpb4-6", "gpb4-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c8_bus: i2c8-bus {
+	i2c8_bus: i2c8-bus-pins {
 		samsung,pins = "gpb5-0", "gpb5-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c9_bus: i2c9-bus {
+	i2c9_bus: i2c9-bus-pins {
 		samsung,pins = "gpb5-2", "gpb5-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c10_bus: i2c10-bus {
+	i2c10_bus: i2c10-bus-pins {
 		samsung,pins = "gpb5-4", "gpb5-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	i2c11_bus: i2c11-bus {
+	i2c11_bus: i2c11-bus-pins {
 		samsung,pins = "gpb5-6", "gpb5-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_a: cam-gpio-a {
+	cam_gpio_a: cam-gpio-a-pins {
 		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
 			"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
 			"gpe1-0", "gpe1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_gpio_b: cam-gpio-b {
+	cam_gpio_b: cam-gpio-b-pins {
 		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
 			"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <3>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c1_bus: cam-i2c1-bus {
+	cam_i2c1_bus: cam-i2c1-bus-pins {
 		samsung,pins = "gpf0-2", "gpf0-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_i2c0_bus: cam-i2c0-bus {
+	cam_i2c0_bus: cam-i2c0-bus-pins {
 		samsung,pins = "gpf0-0", "gpf0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi0_bus: cam-spi0-bus {
+	cam_spi0_bus: cam-spi0-bus-pins {
 		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 
-	cam_spi1_bus: cam-spi1-bus {
+	cam_spi1_bus: cam-spi1-bus-pins {
 		samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
-	gpc0: gpc0 {
+	gpc0: gpc0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -410,7 +421,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc1: gpc1 {
+	gpc1: gpc1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -418,7 +429,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc2: gpc2 {
+	gpc2: gpc2-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -426,7 +437,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc3: gpc3 {
+	gpc3: gpc3-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -434,7 +445,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpc4: gpc4 {
+	gpc4: gpc4-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -442,121 +453,121 @@
 		#interrupt-cells = <2>;
 	};
 
-	sd0_clk: sd0-clk {
+	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpc0-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_cmd: sd0-cmd {
+	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpc0-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus1: sd0-bus-width1 {
+	sd0_bus1: sd0-bus-width1-pins {
 		samsung,pins = "gpc0-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus4: sd0-bus-width4 {
+	sd0_bus4: sd0-bus-width4-pins {
 		samsung,pins = "gpc0-3", "gpc0-4", "gpc0-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_bus8: sd0-bus-width8 {
+	sd0_bus8: sd0-bus-width8-pins {
 		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd0_rdqs: sd0-rdqs {
+	sd0_rdqs: sd0-rdqs-pins {
 		samsung,pins = "gpc0-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_clk: sd1-clk {
+	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpc1-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_cmd: sd1-cmd {
+	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpc1-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus1: sd1-bus-width1 {
+	sd1_bus1: sd1-bus-width1-pins {
 		samsung,pins = "gpc1-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus4: sd1-bus-width4 {
+	sd1_bus4: sd1-bus-width4-pins {
 		samsung,pins = "gpc1-3", "gpc1-4", "gpc1-5";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd1_bus8: sd1-bus-width8 {
+	sd1_bus8: sd1-bus-width8-pins {
 		samsung,pins = "gpc4-0", "gpc4-1", "gpc4-2", "gpc4-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_clk: sd2-clk {
+	sd2_clk: sd2-clk-pins {
 		samsung,pins = "gpc2-0";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cmd: sd2-cmd {
+	sd2_cmd: sd2-cmd-pins {
 		samsung,pins = "gpc2-1";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_NONE>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_cd: sd2-cd {
+	sd2_cd: sd2-cd-pins {
 		samsung,pins = "gpc2-2";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus1: sd2-bus-width1 {
+	sd2_bus1: sd2-bus-width1-pins {
 		samsung,pins = "gpc2-3";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 
-	sd2_bus4: sd2-bus-width4 {
+	sd2_bus4: sd2-bus-width4-pins {
 		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-		samsung,pin-function = <2>;
-		samsung,pin-pud = <PIN_PULL_UP>;
-		samsung,pin-drv = <3>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV6>;
 	};
 };
 
 &pinctrl_2 {
-	gpz0: gpz0 {
+	gpz0: gpz0-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
@@ -564,7 +575,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpz1: gpz1 {
+	gpz1: gpz1-gpio-bank {
 		gpio-controller;
 		#gpio-cells = <2>;
 
diff --git a/arch/arm/boot/dts/exynos5260-xyref5260.dts b/arch/arm/boot/dts/exynos5260-xyref5260.dts
index 3daef94bee38..d072a7398866 100644
--- a/arch/arm/boot/dts/exynos5260-xyref5260.dts
+++ b/arch/arm/boot/dts/exynos5260-xyref5260.dts
@@ -1,27 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG XYREF5260 board device tree source
+ * Samsung XYREF5260 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos5260.dtsi"
 
 / {
-	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
+	model = "Samsung XYREF5260 board based on Exynos5260";
 	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
-		bootargs = "console=ttySAC2,115200";
+		stdout-path = "serial2:115200n8";
 	};
 
 	fin_pll: xxti {
@@ -31,6 +34,27 @@
 		#clock-cells = <0>;
 	};
 
+	ioclk_pcm: clock-pcm-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <2048000>;
+		clock-output-names = "ioclk_pcm_extclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_i2s: clock-i2s-cd {
+		compatible = "fixed-clock";
+		clock-frequency = <147456000>;
+		clock-output-names = "ioclk_i2s_cdclk";
+		#clock-cells = <0>;
+	};
+
+	ioclk_spdif: clock-spdif-ext {
+		compatible = "fixed-clock";
+		clock-frequency = <49152000>;
+		clock-output-names = "ioclk_spdif_extclk";
+		#clock-cells = <0>;
+	};
+
 	xrtcxti: xrtcxti {
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
@@ -40,11 +64,11 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
 	};
 };
 
@@ -66,12 +90,11 @@
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	broken-cd;
-	bypass-smu;
 	cap-mmc-highspeed;
-	supports-hs200-mode; /* 200 MHz */
+	mmc-hs200-1_8v;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
@@ -82,7 +105,6 @@
 
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index 36da38e29000..a97449b4640c 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -1,23 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5260 SoC device tree source
+ * Samsung Exynos5260 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include "skeleton.dtsi"
+ */
 
 #include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	compatible = "samsung,exynos5260", "samsung,exynos5";
 	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 
 	aliases {
+		i2c0 = &hsi2c_0;
+		i2c1 = &hsi2c_1;
+		i2c2 = &hsi2c_2;
+		i2c3 = &hsi2c_3;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
@@ -31,42 +34,68 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu2>;
+				};
+				core1 {
+					cpu = <&cpu3>;
+				};
+				core2 {
+					cpu = <&cpu4>;
+				};
+				core3 {
+					cpu = <&cpu5>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			cci-control-port = <&cci_control1>;
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			cci-control-port = <&cci_control1>;
 		};
 
-		cpu@100 {
+		cpu2: cpu@100 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x100>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@101 {
+		cpu3: cpu@101 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x101>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@102 {
+		cpu4: cpu@102 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 			cci-control-port = <&cci_control0>;
 		};
 
-		cpu@103 {
+		cpu5: cpu@103 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
 			reg = <0x103>;
@@ -84,91 +113,218 @@
 			compatible = "samsung,exynos5260-clock-top";
 			reg = <0x10010000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEM_PLL>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_mem_pll",
+				      "dout_bus_pll",
+				      "dout_media_pll";
 		};
 
 		clock_peri: clock-controller@10200000 {
 			compatible = "samsung,exynos5260-clock-peri";
 			reg = <0x10200000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&ioclk_pcm>,
+				 <&ioclk_i2s>,
+				 <&ioclk_spdif>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_66>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART0>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART1>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_UART2>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI0_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI1_B>,
+				 <&clock_top TOP_DOUT_SCLK_PERI_SPI2_B>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>;
+			clock-names = "fin_pll",
+				      "ioclk_pcm_extclk",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_spdif_extclk",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "dout_aclk_peri_66",
+				      "dout_sclk_peri_uart0",
+				      "dout_sclk_peri_uart1",
+				      "dout_sclk_peri_uart2",
+				      "dout_sclk_peri_spi0_b",
+				      "dout_sclk_peri_spi1_b",
+				      "dout_sclk_peri_spi2_b",
+				      "dout_aclk_peri_aud";
 		};
 
 		clock_egl: clock-controller@10600000 {
 			compatible = "samsung,exynos5260-clock-egl";
 			reg = <0x10600000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_BUS_PLL>;
+			clock-names = "fin_pll",
+				      "dout_bus_pll";
 		};
 
 		clock_kfc: clock-controller@10700000 {
 			compatible = "samsung,exynos5260-clock-kfc";
 			reg = <0x10700000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+			clock-names = "fin_pll",
+				      "dout_media_pll";
 		};
 
-		clock_g2d: clock-controller@10A00000 {
+		clock_g2d: clock-controller@10a00000 {
 			compatible = "samsung,exynos5260-clock-g2d";
-			reg = <0x10A00000 0x10000>;
+			reg = <0x10a00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_G2D_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_g2d_333";
 		};
 
-		clock_mif: clock-controller@10CE0000 {
+		clock_mif: clock-controller@10ce0000 {
 			compatible = "samsung,exynos5260-clock-mif";
-			reg = <0x10CE0000 0x10000>;
+			reg = <0x10ce0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
 		clock_mfc: clock-controller@11090000 {
 			compatible = "samsung,exynos5260-clock-mfc";
 			reg = <0x11090000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_MFC_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_mfc_333";
 		};
 
 		clock_g3d: clock-controller@11830000 {
 			compatible = "samsung,exynos5260-clock-g3d";
 			reg = <0x11830000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
 		};
 
-		clock_fsys: clock-controller@122E0000 {
+		clock_fsys: clock-controller@122e0000 {
 			compatible = "samsung,exynos5260-clock-fsys";
-			reg = <0x122E0000 0x10000>;
+			reg = <0x122e0000 0x10000>;
 			#clock-cells = <1>;
-		};
-
-		clock_aud: clock-controller@128C0000 {
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_FSYS_200>;
+			clock-names = "fin_pll",
+				      "phyclk_usbhost20_phy_phyclock",
+				      "phyclk_usbhost20_phy_freeclk",
+				      "phyclk_usbhost20_phy_clk48mohci",
+				      "phyclk_usbdrd30_udrd30_pipe_pclk",
+				      "phyclk_usbdrd30_udrd30_phyclock",
+				      "dout_aclk_fsys_200";
+		};
+
+		clock_aud: clock-controller@128c0000 {
 			compatible = "samsung,exynos5260-clock-aud";
-			reg = <0x128C0000 0x10000>;
+			reg = <0x128c0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_FOUT_AUD_PLL>,
+				 <&ioclk_i2s>,
+				 <&ioclk_pcm>;
+			clock-names = "fin_pll",
+				      "fout_aud_pll",
+				      "ioclk_i2s_cdclk",
+				      "ioclk_pcm_extclk";
 		};
 
-		clock_isp: clock-controller@133C0000 {
+		clock_isp: clock-controller@133c0000 {
 			compatible = "samsung,exynos5260-clock-isp";
-			reg = <0x133C0000 0x10000>;
+			reg = <0x133c0000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_266>,
+				 <&clock_top TOP_DOUT_ACLK_ISP1_400>,
+				 <&clock_top TOP_MOUT_ACLK_ISP1_266>;
+			clock-names = "fin_pll",
+				      "dout_aclk_isp1_266",
+				      "dout_aclk_isp1_400",
+				      "mout_aclk_isp1_266";
 		};
 
-		clock_gscl: clock-controller@13F00000 {
+		clock_gscl: clock-controller@13f00000 {
 			compatible = "samsung,exynos5260-clock-gscl";
-			reg = <0x13F00000 0x10000>;
+			reg = <0x13f00000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_400>,
+				 <&clock_top TOP_DOUT_ACLK_GSCL_333>;
+			clock-names = "fin_pll",
+				      "dout_aclk_gscl_400",
+				      "dout_aclk_gscl_333";
 		};
 
 		clock_disp: clock-controller@14550000 {
 			compatible = "samsung,exynos5260-clock-disp";
 			reg = <0x14550000 0x10000>;
 			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&fin_pll>,
+				 <&ioclk_spdif>,
+				 <&clock_top TOP_DOUT_ACLK_PERI_AUD>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_222>,
+				 <&clock_top TOP_DOUT_SCLK_DISP_PIXEL>,
+				 <&clock_top TOP_DOUT_ACLK_DISP_333>;
+			clock-names = "fin_pll",
+				      "phyclk_dptx_phy_ch3_txd_clk",
+				      "phyclk_dptx_phy_ch2_txd_clk",
+				      "phyclk_dptx_phy_ch1_txd_clk",
+				      "phyclk_dptx_phy_ch0_txd_clk",
+				      "phyclk_hdmi_phy_tmds_clko",
+				      "phyclk_hdmi_phy_ref_clko",
+				      "phyclk_hdmi_phy_pixel_clko",
+				      "phyclk_hdmi_link_o_tmds_clkhi",
+				      "phyclk_mipi_dphy_4l_m_txbyte_clkhs",
+				      "phyclk_dptx_phy_o_ref_clk_24m",
+				      "phyclk_dptx_phy_clk_div2",
+				      "phyclk_mipi_dphy_4l_m_rxclkesc0",
+				      "phyclk_hdmi_phy_ref_cko",
+				      "ioclk_spdif_extclk",
+				      "dout_aclk_peri_aud",
+				      "dout_aclk_disp_222",
+				      "dout_sclk_disp_pixel",
+				      "dout_aclk_disp_333";
 		};
 
 		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+			compatible = "arm,gic-400", "arm,cortex-a15-gic";
 			#interrupt-cells = <3>;
-			#address-cells = <0>;
-			#size-cells = <0>;
 			interrupt-controller;
 			reg = <0x10481000 0x1000>,
-				<0x10482000 0x1000>,
+				<0x10482000 0x2000>,
 				<0x10484000 0x2000>,
 				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
+			interrupts = <GIC_PPI 9
+					(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		};
 
 		chipid: chipid@10000000 {
@@ -176,23 +332,32 @@
 			reg = <0x10000000 0x100>;
 		};
 
-		mct: mct@100B0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x100B0000 0x1000>;
+		mct: timer@100b0000 {
+			compatible = "samsung,exynos5260-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x100b0000 0x1000>;
 			clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
 			clock-names = "fin_pll", "mct";
-			interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
-					<0 107 0>, <0 122 0>, <0 123 0>,
-					<0 124 0>, <0 125 0>, <0 126 0>,
-					<0 127 0>, <0 128 0>, <0 129 0>;
-		};
-
-		cci: cci@10F00000 {
+			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cci: cci@10f00000 {
 			compatible = "arm,cci-400";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			reg = <0x10F00000 0x1000>;
-			ranges = <0x0 0x10F00000 0x6000>;
+			reg = <0x10f00000 0x1000>;
+			ranges = <0x0 0x10f00000 0x6000>;
 
 			cci_control0: slave-if@4000 {
 				compatible = "arm,cci-400-ctrl-if";
@@ -210,54 +375,54 @@
 		pinctrl_0: pinctrl@11600000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x11600000 0x1000>;
-			interrupts = <0 79 0>;
+			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos4210-wakeup-eint";
 				interrupt-parent = <&gic>;
-				interrupts = <0 32 0>;
+				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
 		pinctrl_1: pinctrl@12290000 {
 			compatible = "samsung,exynos5260-pinctrl";
 			reg = <0x12290000 0x1000>;
-			interrupts = <0 157 0>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pinctrl_2: pinctrl@128B0000 {
+		pinctrl_2: pinctrl@128b0000 {
 			compatible = "samsung,exynos5260-pinctrl";
-			reg = <0x128B0000 0x1000>;
-			interrupts = <0 243 0>;
+			reg = <0x128b0000 0x1000>;
+			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		pmu_system_controller: system-controller@10D50000 {
+		pmu_system_controller: system-controller@10d50000 {
 			compatible = "samsung,exynos5260-pmu", "syscon";
-			reg = <0x10D50000 0x10000>;
+			reg = <0x10d50000 0x10000>;
 		};
 
-		uart0: serial@12C00000 {
+		uart0: serial@12c00000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 146 0>;
+			reg = <0x12c00000 0x100>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
 		};
 
-		uart1: serial@12C10000 {
+		uart1: serial@12c10000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 147 0>;
+			reg = <0x12c10000 0x100>;
+			interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
 		};
 
-		uart2: serial@12C20000 {
+		uart2: serial@12c20000 {
 			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 148 0>;
+			reg = <0x12c20000 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -266,7 +431,7 @@
 		uart3: serial@12860000 {
 			compatible = "samsung,exynos4210-uart";
 			reg = <0x12860000 0x100>;
-			interrupts = <0 145 0>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
 			clock-names = "uart", "clk_uart_baud0";
 			status = "disabled";
@@ -275,11 +440,19 @@
 		mmc_0: mmc@12140000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12140000 0x2000>;
-			interrupts = <0 156 0>;
+			interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
 			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC0>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC0_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
 			fifo-depth = <64>;
 			status = "disabled";
 		};
@@ -287,11 +460,19 @@
 		mmc_1: mmc@12150000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12150000 0x2000>;
-			interrupts = <0 158 0>;
+			interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
 			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC1>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC1_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
 			fifo-depth = <64>;
 			status = "disabled";
 		};
@@ -299,14 +480,74 @@
 		mmc_2: mmc@12160000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12160000 0x2000>;
-			interrupts = <0 159 0>;
+			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
 			clock-names = "biu", "ciu";
+			assigned-clocks =
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_B>,
+				<&clock_top TOP_SCLK_MMC2>;
+			assigned-clock-parents =
+				<&clock_top TOP_MOUT_BUSTOP_PLL_USER>,
+				<&clock_top TOP_MOUT_SCLK_FSYS_MMC2_SDCLKIN_A>;
+			assigned-clock-rates = <0>, <0>, <800000000>;
 			fifo-depth = <64>;
 			status = "disabled";
 		};
+
+		hsi2c_0: i2c@12da0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12da0000 0x1000>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC0>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_1: i2c@12db0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12db0000 0x1000>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c1_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC1>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_2: i2c@12dc0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12dc0000 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c2_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC2>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
+
+		hsi2c_3: i2c@12dd0000 {
+			compatible = "samsung,exynos5260-hsi2c";
+			reg = <0x12dd0000 0x1000>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c3_hs_bus>;
+			clocks = <&clock_peri PERI_CLK_HSIC3>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
new file mode 100644
index 000000000000..882fc77c4bc4
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ */
+
+/dts-v1/;
+#include "exynos5410.dtsi"
+#include <dt-bindings/clock/maxim,max77802.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos54xx-odroidxu-leds.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU";
+	compatible = "hardkernel,odroid-xu", "samsung,exynos5410", "samsung,exynos5";
+
+	aliases {
+		ethernet = &ethernet;
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	emmc_pwrseq: pwrseq {
+		pinctrl-0 = <&emmc_nrst_pin>;
+		pinctrl-names = "default";
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
+	};
+
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
+
+	fin_pll: xxti {
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "fin_pll";
+		#clock-cells = <0>;
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "Odroid-XU";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN1", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR";
+
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&link0_codec>;
+		simple-audio-card,frame-master = <&link0_codec>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audi2s0 0>;
+			system-clock-frequency = <19200000>;
+		};
+
+		link0_codec: simple-audio-card,codec {
+			sound-dai = <&max98090>;
+			clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo10_reg>;
+	status = "okay";
+};
+
+&audi2s0 {
+	status = "okay";
+};
+
+&clock {
+	clocks = <&fin_pll>;
+	assigned-clocks = <&clock CLK_FOUT_EPLL>;
+	assigned-clock-rates = <192000000>;
+};
+
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>;
+
+	assigned-clock-rates = <0>,
+			       <0>,
+			       <96000000>,
+			       <19200000>;
+};
+
+&cpu0_thermal {
+	polling-delay-passive = <0>;
+	polling-delay = <0>;
+
+	trips {
+		cpu_alert0: cpu-alert-0 {
+			temperature = <50000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert1: cpu-alert-1 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_alert2: cpu-alert-2 {
+			temperature = <70000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "active";
+		};
+		cpu_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu_alert0>;
+			cooling-device = <&fan0 0 1>;
+		};
+		map1 {
+			trip = <&cpu_alert1>;
+			cooling-device = <&fan0 1 2>;
+		};
+		map2 {
+			trip = <&cpu_alert2>;
+			cooling-device = <&fan0 2 3>;
+		};
+	};
+};
+
+&hsi2c_4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	usb3503: usb-hub@8 {
+		compatible = "smsc,usb3503";
+		reg = <0x08>;
+
+		intn-gpios = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+		connect-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
+		initial-mode = <1>;
+
+		clock-names = "refclk";
+		clocks = <&pmu_system_controller 0>;
+		refclk-frequency = <24000000>;
+	};
+
+	max77802: pmic@9 {
+		compatible = "maxim,max77802";
+		reg = <0x9>;
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_NONE>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&max77802_irq>, <&pmic_dvs_1>, <&pmic_dvs_2>;
+		wakeup-source;
+		#clock-cells = <1>;
+
+		inl1-supply = <&buck5_reg>;
+		inl2-supply = <&buck7_reg>;
+		inl3-supply = <&buck9_reg>;
+		inl4-supply = <&buck9_reg>;
+		inl5-supply = <&buck9_reg>;
+		inl6-supply = <&buck10_reg>;
+		inl7-supply = <&buck9_reg>;
+		/* inl9 supply is BOOST, not configured here */
+		inl10-supply = <&buck7_reg>;
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "buck7";
+				regulator-min-microvolt = <1300000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				/* vdd_mmc0 */
+				regulator-name = "vddf_2v85";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "buck9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "buck10";
+				regulator-min-microvolt = <2950000>;
+				regulator-max-microvolt = <2950000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_alive";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vddq_m1_m2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vddq_gpio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vddq_mmc2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				/* Having it off prevents reboot */
+				regulator-always-on;
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd18_hsic";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd18_bpll";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vddq_lcd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/* Supplies also GPK and GPJ */
+				regulator-always-on;
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd10_hdmi";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "ldo9";
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd18_mipi";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vddq_mmc01";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				/*
+				 * Having it off prevents accessing MMC after
+				 * reboot with error:
+				 * MMC Device 1: Clock OFF has been failed.
+				 */
+				regulator-always-on;
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "vdd33_usb3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vddq_abbg0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "vddq_abbg1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd10_usb3";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "cam_sensor_core";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "ldo18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "ldo19";
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "vdd_mmc0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo21_reg: LDO21 {
+				/* vdd_mmc2 */
+				regulator-name = "vddf_2v8";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "dp_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "cam_af";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "eth_p3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "usb30_extclk";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "ldo27";
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "ldo28";
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "ldo29";
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "vddq_e1_e2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			/* On revisions with ti,ina231 this is sensor VS */
+			ldo32_reg: LDO32 {
+				regulator-name = "vs_power_meter";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "ldo33";
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "ldo34";
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "ldo35";
+			};
+		};
+	};
+};
+
+&i2c_1 {
+	status = "okay";
+	max98090: audio-codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpj3>;
+		interrupts = <0 IRQ_TYPE_NONE>;
+		clocks = <&audi2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&mmc_0 {
+	status = "okay";
+	mmc-pwrseq = <&emmc_pwrseq>;
+	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd>;
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	vmmc-supply = <&ldo20_reg>;
+	vqmmc-supply = <&ldo11_reg>;
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4 &sd2_wp>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	vmmc-supply = <&ldo21_reg>;
+	vqmmc-supply = <&ldo4_reg>;
+};
+
+&pinctrl_0 {
+	emmc_nrst_pin: emmc-nrst-pins {
+		samsung,pins = "gpd1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd2_wp: sd2-wp-pins {
+		samsung,pins = "gpm5-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		/* Pin is floating so be sure to disable write-protect */
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpx0-0", "gpx0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pmic_dvs_1: pmic-dvs-1-pins {
+		samsung,pins = "gpx0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+		samsung,pin-val = <1>;
+	};
+
+	max77802_irq: max77802-irq-pins {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usb3_0_oc {
+	/* External pull up */
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+};
+
+&usb3_1_oc {
+	/* External pull up */
+	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo12_reg>;
+	vdd10-supply = <&ldo15_reg>;
+};
+
+&usbhost2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	ethernet: ethernet@2 {
+		compatible = "usb424,9730";
+		reg = <2>;
+		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
new file mode 100644
index 000000000000..f7b923382892
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -0,0 +1,652 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Exynos5410 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2013 Hardkernel Co., Ltd.
+ *              https://www.hardkernel.com
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_0 {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy0: gpy0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy7: gpy7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpx0: gpx0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>,
+			     <24 0>,
+			     <25 0>,
+			     <25 1>,
+			     <26 0>,
+			     <26 1>,
+			     <27 0>,
+			     <27 1>;
+	};
+
+	gpx1: gpx1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>,
+			     <28 1>,
+			     <29 0>,
+			     <29 1>,
+			     <30 0>,
+			     <30 1>,
+			     <31 0>,
+			     <31 1>;
+	};
+
+	gpx2: gpx2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus-pins {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus-pins {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus-pins {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus-pins {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_1 {
+	gpj0: gpj0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj1: gpj1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj2: gpj2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj3: gpj3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk1: gpk1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk2: gpk2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk3: gpk3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	usb3_1_oc: usb3-1-oc-pins {
+		samsung,pins = "gpk2-4", "gpk2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_1_vbusctrl: usb3-1-vbusctrl-pins {
+		samsung,pins = "gpk2-6", "gpk2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_oc: usb3-0-oc-pins {
+		samsung,pins = "gpk3-0", "gpk3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	usb3_0_vbusctrl: usb3-0-vbusctrl-pins {
+		samsung,pins = "gpk3-2", "gpk3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_2 {
+	gpv0: gpv0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv1: gpv1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv2: gpv2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv3: gpv3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpv4: gpv4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_3 {
+	gpz: gpz-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	audi2s0_bus: audi2s0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4";
+		samsung,pin-function = <2>;
+		samsung,pin-pud = <0>;
+		samsung,pin-drv = <0>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/exynos5410-smdk5410.dts b/arch/arm/boot/dts/exynos5410-smdk5410.dts
index be3e02530b42..bb29b76f6f6a 100644
--- a/arch/arm/boot/dts/exynos5410-smdk5410.dts
+++ b/arch/arm/boot/dts/exynos5410-smdk5410.dts
@@ -1,26 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5410 board device tree source
+ * Samsung SMDK5410 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos5410.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
 / {
-	model = "Samsung SMDK5410 board based on EXYNOS5410";
+	model = "Samsung SMDK5410 board based on Exynos5410";
 	compatible = "samsung,smdk5410", "samsung,exynos5410", "samsung,exynos5";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
-		bootargs = "console=ttySAC2,115200";
+		stdout-path = "serial2:115200n8";
 	};
 
 	fin_pll: xxti {
@@ -30,19 +34,39 @@
 		#clock-cells = <0>;
 	};
 
-	firmware@02037000 {
+	pmic_ap_clk: pmic-ap-clk {
+		/* Workaround for missing PMIC and its clock */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+	};
+
+	firmware@2037000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x02037000 0x1000>;
 	};
 
+	vdd10_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD10_USB3";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+	};
+
+	vdd33_usb3: voltage-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD33_USB3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 };
 
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
 	cap-mmc-highspeed;
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <2 3>;
 	samsung,dw-mshc-ddr-timing = <1 2>;
@@ -51,7 +75,6 @@
 
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
@@ -61,14 +84,69 @@
 	disable-wp;
 };
 
-&uart0 {
-		status = "okay";
+&pinctrl_0 {
+	srom_ctl: srom-ctl-pins {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	srom_ebi: srom-ebi-pins {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>, <&pmic_ap_clk>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@3,0 {
+		compatible = "smsc,lan9115";
+		reg = <3 0 0x10000>;
+		phy-mode = "mii";
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		smsc,force-internal-phy;
+
+		samsung,srom-page-mode;
+		samsung,srom-timing = <9 12 1 9 1 1>;
+	};
+};
+
+&serial_0 {
+	status = "okay";
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
 };
 
-&uart1 {
-		status = "okay";
+&usbdrd3_0 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
 };
 
-&uart2 {
-		status = "okay";
+&usbdrd3_1 {
+	vdd10-supply = <&vdd10_usb3>;
+	vdd33-supply = <&vdd33_usb3>;
 };
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 731eefd23fa9..350b8afa0a3a 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -1,57 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5410 SoC device tree source
+ * Samsung Exynos5410 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5410 SoC device nodes are listed in this file.
- * EXYNOS5410 based board files can include this file and provide
+ * Samsung Exynos5410 SoC device nodes are listed in this file.
+ * Exynos5410 based board files can include this file and provide
  * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
+#include "exynos54xx.dtsi"
 #include <dt-bindings/clock/exynos5410.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos5410", "samsung,exynos5";
 	interrupt-parent = <&gic>;
 
 	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-		serial2 = &uart2;
+		pinctrl0 = &pinctrl_0;
+		pinctrl1 = &pinctrl_1;
+		pinctrl2 = &pinctrl_2;
+		pinctrl3 = &pinctrl_3;
 	};
 
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		CPU0: cpu@0 {
+		cpu0: cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x0>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU1: cpu@1 {
+		cpu1: cpu@1 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x1>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU2: cpu@2 {
+		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x2>;
 			clock-frequency = <1600000000>;
 		};
 
-		CPU3: cpu@3 {
+		cpu3: cpu@3 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0x3>;
@@ -65,100 +65,68 @@
 		#size-cells = <1>;
 		ranges;
 
-		combiner: interrupt-controller@10440000 {
-			compatible = "samsung,exynos4210-combiner";
-			#interrupt-cells = <2>;
-			interrupt-controller;
-			samsung,combiner-nr = <32>;
-			reg = <0x10440000 0x1000>;
-			interrupts =	<0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
-					<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
-					<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
-					<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
-					<0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
-					<0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
-					<0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
-					<0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
-		};
-
-		gic: interrupt-controller@10481000 {
-			compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
-			#interrupt-cells = <3>;
-			interrupt-controller;
-			reg =	<0x10481000 0x1000>,
-				<0x10482000 0x1000>,
-				<0x10484000 0x2000>,
-				<0x10486000 0x2000>;
-			interrupts = <1 9 0xf04>;
-		};
-
-		chipid@10000000 {
-			compatible = "samsung,exynos4210-chipid";
-			reg = <0x10000000 0x100>;
-		};
-
 		pmu_system_controller: system-controller@10040000 {
 			compatible = "samsung,exynos5410-pmu", "syscon";
 			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&fin_pll>;
+			#clock-cells = <1>;
 		};
 
-		mct: mct@101C0000 {
-			compatible = "samsung,exynos4210-mct";
-			reg = <0x101C0000 0xB00>;
-			interrupt-parent = <&interrupt_map>;
-			interrupts = <0>, <1>, <2>, <3>,
-				<4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-			clocks = <&fin_pll>, <&clock CLK_MCT>;
-			clock-names = "fin_pll", "mct";
-
-			interrupt_map: interrupt-map {
-				#interrupt-cells = <1>;
-				#address-cells = <0>;
-				#size-cells = <0>;
-				interrupt-map = <0 &combiner 23 3>,
-						<1 &combiner 23 4>,
-						<2 &combiner 25 2>,
-						<3 &combiner 25 3>,
-						<4 &gic 0 120 0>,
-						<5 &gic 0 121 0>,
-						<6 &gic 0 122 0>,
-						<7 &gic 0 123 0>,
-						<8 &gic 0 128 0>,
-						<9 &gic 0 129 0>,
-						<10 &gic 0 130 0>,
-						<11 &gic 0 131 0>;
-			};
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5410-clock";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
 		};
 
-		sysram@02020000 {
-			compatible = "mmio-sram";
-			reg = <0x02020000 0x54000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0 0x02020000 0x54000>;
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5410-audss-clock";
+			reg = <0x03810000 0x0c>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>, <&clock CLK_FOUT_EPLL>;
+			clock-names = "pll_ref", "pll_in";
+		};
 
-			smp-sysram@0 {
-				compatible = "samsung,exynos4210-sysram";
-				reg = <0x0 0x1000>;
-			};
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
 
-			smp-sysram@53000 {
-				compatible = "samsung,exynos4210-sysram-ns";
-				reg = <0x53000 0x1000>;
-			};
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
 		};
 
-		clock: clock-controller@10010000 {
-			compatible = "samsung,exynos5410-clock";
-			reg = <0x10010000 0x30000>;
-			#clock-cells = <1>;
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10068000 0x100>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
+		};
+
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x1006c000 0x100>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
 		};
 
 		mmc_0: mmc@12200000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12200000 0x1000>;
-			interrupts = <0 75 0>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -170,7 +138,7 @@
 		mmc_1: mmc@12210000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12210000 0x1000>;
-			interrupts = <0 76 0>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -182,7 +150,7 @@
 		mmc_2: mmc@12220000 {
 			compatible = "samsung,exynos5250-dw-mshc";
 			reg = <0x12220000 0x1000>;
-			interrupts = <0 77 0>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -191,31 +159,282 @@
 			status = "disabled";
 		};
 
-		uart0: serial@12C00000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C00000 0x100>;
-			interrupts = <0 51 0>;
-			clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
 		};
 
-		uart1: serial@12C10000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C10000 0x100>;
-			interrupts = <0 52 0>;
-			clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
-			clock-names = "uart", "clk_uart_baud0";
-			status = "disabled";
+		pinctrl_1: pinctrl@14000000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		uart2: serial@12C20000 {
-			compatible = "samsung,exynos4210-uart";
-			reg = <0x12C20000 0x100>;
-			interrupts = <0 53 0>;
-			clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
-			clock-names = "uart", "clk_uart_baud0";
+		pinctrl_2: pinctrl@10d10000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x10d10000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_3: pinctrl@3860000 {
+			compatible = "samsung,exynos5410-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pdma0: dma-controller@121a0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121a0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA0>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		pdma1: dma-controller@121b0000 {
+			compatible = "arm,pl330", "arm,primecell";
+			reg = <0x121b0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_PDMA1>;
+			clock-names = "apb_pclk";
+			#dma-cells = <1>;
+		};
+
+		audi2s0: i2s@3830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&pdma0 10>,
+				<&pdma0 9>,
+				<&pdma0 8>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&audi2s0_bus>;
 			status = "disabled";
 		};
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+	};
+};
+
+&adc {
+	clocks = <&clock CLK_TSADC>;
+	clock-names = "adc";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+&arm_a15_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
+
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
 };
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&fin_pll>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&prng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
+&rtc {
+	clocks = <&clock CLK_RTC>;
+	clock-names = "rtc";
+	status = "disabled";
+};
+
+&serial_0 {
+	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 13>, <&pdma0 14>;
+	dma-names = "rx", "tx";
+};
+
+&serial_1 {
+	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 15>, <&pdma1 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_2 {
+	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 15>, <&pdma0 16>;
+	dma-names = "rx", "tx";
+};
+
+&serial_3 {
+	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
+	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 17>, <&pdma1 18>;
+	dma-names = "rx", "tx";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000
+		  1 0 0x05000000 0x20000
+		  2 0 0x06000000 0x20000
+		  3 0 0x07000000 0x20000>;
+};
+
+&trng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+#include "exynos5410-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index eeb4ac22cfce..809ddda02e53 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -1,33 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos5420 based Arndale Octa board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/clock/samsung,s2mps11.h>
 
 / {
-	model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
+	model = "Insignal Arndale Octa evaluation board based on Exynos5420";
 	compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
-		bootargs = "console=ttySAC3,115200";
+		stdout-path = "serial3:115200n8";
 	};
 
-	firmware@02073000 {
+	firmware@2073000 {
 		compatible = "samsung,secure-firmware";
 		reg = <0x02073000 0x1000>;
 	};
@@ -39,46 +44,323 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 
-		wakeup {
+		key-wakeup {
 			label = "SW-TACT1";
-			gpios = <&gpx2 7 1>;
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 };
 
-&usbdrd_dwc3_1 {
-	dr_mode = "host";
+&adc {
+	vdd-supply = <&ldo4_reg>;
+	status = "okay";
 };
 
 &cci {
 	status = "disabled";
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&cpu0_thermal {
+	trips {
+		cpu0_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu0_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu0_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu0_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		/*
+		 * Reduce the CPU speed by 2 steps, down to: 1600 MHz
+		 * and 1100 MHz.
+		 */
+		map0 {
+			trip = <&cpu0_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		/*
+		 * Reduce the CPU speed down to 1200 MHz big (6 steps)
+		 * and 800 MHz LITTLE (5 steps).
+		 */
+		map1 {
+			trip = <&cpu0_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		/*
+		 * Reduce the CPU speed as much as possible, down to 700 MHz
+		 * big (11 steps) and 600 MHz LITTLE (7 steps).
+		 */
+		map2 {
+			trip = <&cpu0_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 5 7>,
+					 <&cpu5 5 7>,
+					 <&cpu6 5 7>,
+					 <&cpu7 5 7>;
+		};
+	};
+};
+
+&cpu1_thermal {
+	trips {
+		cpu1_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu1_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu1_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu1_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu1_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		map1 {
+			trip = <&cpu1_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		map2 {
+			trip = <&cpu1_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 5 7>,
+					 <&cpu5 5 7>,
+					 <&cpu6 5 7>,
+					 <&cpu7 5 7>;
+		};
+	};
+};
+
+&cpu2_thermal {
+	trips {
+		cpu2_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu2_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu2_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu2_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu2_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		map1 {
+			trip = <&cpu2_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		map2 {
+			trip = <&cpu2_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 6 7>,
+					 <&cpu5 6 7>,
+					 <&cpu6 6 7>,
+					 <&cpu7 6 7>;
+		};
+	};
+};
+
+&cpu3_thermal {
+	trips {
+		cpu3_alert0: cpu-alert-0 {
+			temperature = <60000>; /* millicelsius */
+			hysteresis = <5000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu3_alert1: cpu-alert-1 {
+			temperature = <80000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu3_alert2: cpu-alert-2 {
+			temperature = <110000>; /* millicelsius */
+			hysteresis = <10000>; /* millicelsius */
+			type = "passive";
+		};
+		cpu3_crit0: cpu-crit-0 {
+			temperature = <120000>; /* millicelsius */
+			hysteresis = <0>; /* millicelsius */
+			type = "critical";
+		};
+	};
+
+	cooling-maps {
+		map0 {
+			trip = <&cpu3_alert0>;
+			cooling-device = <&cpu0 0 2>,
+					 <&cpu1 0 2>,
+					 <&cpu2 0 2>,
+					 <&cpu3 0 2>,
+					 <&cpu4 0 2>,
+					 <&cpu5 0 2>,
+					 <&cpu6 0 2>,
+					 <&cpu7 0 2>;
+		};
+
+		map1 {
+			trip = <&cpu3_alert1>;
+			cooling-device = <&cpu0 3 6>,
+					 <&cpu1 3 6>,
+					 <&cpu2 3 6>,
+					 <&cpu3 3 6>,
+					 <&cpu4 3 5>,
+					 <&cpu5 3 5>,
+					 <&cpu6 3 5>,
+					 <&cpu7 3 5>;
+		};
+
+		map2 {
+			trip = <&cpu3_alert2>;
+			cooling-device = <&cpu0 6 11>,
+					 <&cpu1 6 11>,
+					 <&cpu2 6 11>,
+					 <&cpu3 6 11>,
+					 <&cpu4 5 7>,
+					 <&cpu5 5 7>,
+					 <&cpu6 5 7>,
+					 <&cpu7 5 7>;
+		};
+	};
+};
+
+&hdmi {
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
+	vdd-supply = <&ldo6_reg>;
+	ddc = <&i2c_2>;
+	status = "okay";
+};
+
 &hsi2c_4 {
 	status = "okay";
 
-	s2mps11_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
-		s2mps11,buck2-ramp-delay = <12>;
-		s2mps11,buck34-ramp-delay = <12>;
-		s2mps11,buck16-ramp-delay = <12>;
-		s2mps11,buck6-ramp-enable = <1>;
-		s2mps11,buck2-ramp-enable = <1>;
-		s2mps11,buck3-ramp-enable = <1>;
-		s2mps11,buck4-ramp-enable = <1>;
 
 		interrupt-parent = <&gpx3>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&s2mps11_irq>;
+		wakeup-source;
 
 		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
 			#clock-cells = <1>;
 			clock-output-names = "s2mps11_ap",
 					"s2mps11_cp", "s2mps11_bt";
@@ -96,13 +378,24 @@
 				regulator-name = "PVDD_APIO_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo3_reg: LDO3 {
 				regulator-name = "PVDD_APIO_MMCON_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				/*
+				 * Must be always on, even though there is
+				 * a consumer (mmc_0).  Otherwise the board
+				 * does not reboot with vendor U-Boot
+				 * (Linaro for Arndale Octa, v2012.07).
+				 */
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo4_reg: LDO4 {
@@ -128,12 +421,17 @@
 				regulator-name = "PVDD_ANAIP_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo8_reg: LDO8 {
 				regulator-name = "PVDD_ABB_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
 			};
 
 			ldo9_reg: LDO9 {
@@ -165,32 +463,74 @@
 
 			ldo13_reg: LDO13 {
 				regulator-name = "PVDD_APIO_MMCOFF_2V8";
-				regulator-min-microvolt = <2800000>;
+				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				/* Unused */
+				regulator-name = "PVDD_LDO14";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
 			};
 
 			ldo15_reg: LDO15 {
 				regulator-name = "PVDD_PERI_2V8";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			ldo16_reg: LDO16 {
 				regulator-name = "PVDD_PERI_3V3";
 				regulator-min-microvolt = <2200000>;
 				regulator-max-microvolt = <2200000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				/* Unused */
+				regulator-name = "PVDD_LDO17";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
 			};
 
 			ldo18_reg: LDO18 {
 				regulator-name = "PVDD_EMMC_1V8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
+				/*
+				 * Must stay in "off" mode during shutdown for
+				 * proper eMMC reset.  The "off" mode is in
+				 * fact controlled by LDO18EN.  The eMMC does
+				 * not have reset pin connected so the reset
+				 * will be triggered by falling edge of
+				 * LDO18EN.
+				 */
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo19_reg: LDO19 {
 				regulator-name = "PVDD_TFLASH_2V8";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			ldo20_reg: LDO20 {
@@ -205,17 +545,39 @@
 				regulator-max-microvolt = <1800000>;
 			};
 
+			ldo22_reg: LDO22 {
+				/* Unused */
+				regulator-name = "PVDD_LDO22";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
 			ldo23_reg: LDO23 {
 				regulator-name = "PVDD_MIFS_1V1";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			ldo24_reg: LDO24 {
 				regulator-name = "PVDD_CAM1_AVDD_2V8";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "PVDD_LDO25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
 			};
 
 			ldo26_reg: LDO26 {
@@ -226,8 +588,13 @@
 
 			ldo27_reg: LDO27 {
 				regulator-name = "PVDD_G3DS_1V0";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
 			};
 
 			ldo28_reg: LDO28 {
@@ -242,6 +609,13 @@
 				regulator-max-microvolt = <1800000>;
 			};
 
+			ldo30_reg: LDO30 {
+				/* Unused */
+				regulator-name = "PVDD_LDO30";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
 			ldo31_reg: LDO31 {
 				regulator-name = "PVDD_PERI_1V8";
 				regulator-min-microvolt = <1800000>;
@@ -260,12 +634,33 @@
 				regulator-max-microvolt = <1800000>;
 			};
 
+			ldo34_reg: LDO34 {
+				/* Unused */
+				regulator-name = "PVDD_LDO34";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
 			ldo35_reg: LDO35 {
 				regulator-name = "PVDD_CAM0_DVDD_1V2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
 			};
 
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "PVDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "PVDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
 			ldo38_reg: LDO38 {
 				regulator-name = "PVDD_CAM0_AVDD_2V8";
 				regulator-min-microvolt = <2800000>;
@@ -275,55 +670,76 @@
 			buck1_reg: BUCK1 {
 				regulator-name = "PVDD_MIF_1V1";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1100000>;
+				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "PVDD_ARM_1V0";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck3_reg: BUCK3 {
 				regulator-name = "PVDD_INT_1V0";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck4_reg: BUCK4 {
 				regulator-name = "PVDD_G3D_1V0";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck5_reg: BUCK5 {
 				regulator-name = "PVDD_LPDDR3_1V2";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-max-microvolt = <1400000>;
 				regulator-always-on;
 			};
 
 			buck6_reg: BUCK6 {
 				regulator-name = "PVDD_KFC_1V0";
 				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1000000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 
 			buck7_reg: BUCK7 {
 				regulator-name = "VIN_LLDO_1V4";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
 			};
 
 			buck8_reg: BUCK8 {
 				regulator-name = "VIN_MLDO_2V0";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <2000000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
 				regulator-always-on;
 			};
 
@@ -338,50 +754,71 @@
 				regulator-name = "PVDD_EMMCF_2V8";
 				regulator-min-microvolt = <2800000>;
 				regulator-max-microvolt = <2800000>;
+				/*
+				 * Must stay in "off" mode during shutdown for
+				 * proper eMMC reset.  The "off" mode is in
+				 * fact controlled by BUCK10EN.  The eMMC does
+				 * not have reset pin connected so the reset
+				 * will be triggered by falling edge of
+				 * BUCK10EN.
+				 */
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
 			};
 		};
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+&i2c_2 {
+	status = "okay";
+};
+
+&mixer {
+	status = "okay";
 };
 
 &mmc_0 {
 	status = "okay";
-	broken-cd;
+	non-removable;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
-	vmmc-supply = <&ldo10_reg>;
+	vmmc-supply = <&ldo18_reg>;
+	vqmmc-supply = <&ldo3_reg>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
 };
 
 &mmc_2 {
 	status = "okay";
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <2 3>;
-	samsung,dw-mshc-ddr-timing = <1 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
 	vmmc-supply = <&ldo19_reg>;
 	vqmmc-supply = <&ldo13_reg>;
 	bus-width = <4>;
 	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
 };
 
 &pinctrl_0 {
-	s2mps11_irq: s2mps11-irq {
+	s2mps11_irq: s2mps11-irq-pins {
 		samsung,pins = "gpx3-2";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
@@ -390,3 +827,17 @@
 	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
 	clock-names = "rtc", "rtc_src";
 };
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-chagall-wifi.dts b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
new file mode 100644
index 000000000000..1319344a2c74
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-chagall-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Chagall WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Chagall WiFi based on Exynos5420";
+	compatible = "samsung,chagall-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_IRLED_3V3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3350000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO28";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo29_reg {
+	regulator-name = "VDD_TCON_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	regulator-name = "VDD_GRIP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1900000>;
+	regulator-max-microvolt = <1900000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5420-cpus.dtsi b/arch/arm/boot/dts/exynos5420-cpus.dtsi
new file mode 100644
index 000000000000..e9f4eb75b50f
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-cpus.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5420 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5420 and Exynos5800
+ * boards: CPU[0123] being the A15.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+		};
+	};
+};
+
+&arm_a7_pmu {
+	interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	status = "okay";
+};
+
+&arm_a15_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
new file mode 100644
index 000000000000..f525b2f5e4e0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-galaxy-tab-common.dtsi
@@ -0,0 +1,696 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Base DT for Samsung's family of tablets based on Exynos5420.
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/samsung,s2mps11.h>
+
+/ {
+	chassis-type = "tablet";
+
+	/*
+	 * To successfully boot the mainline kernel with the stock
+	 * bootloader (SBOOT), the tlb needs to be flushed after the
+	 * page table pointer has been updated in __common_mmu_cache_on.
+	 * The same hack is also needed to boot exynos4412-i9300 with
+	 * stock bootloader, and probably other Samsung devices of
+	 * similar age.  See
+	 * https://lore.kernel.org/all/1355276466-18295-1-git-send-email-arve@android.com
+	 * for more details.
+	 */
+
+	aliases {
+		mmc0 = &mmc_0;
+		mmc2 = &mmc_2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0xc0000000>;
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			debounce-interval = <10>;
+			gpios = <&gpx2 2 GPIO_ACTIVE_LOW>;
+			label = "Power";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-home {
+			debounce-interval = <10>;
+			gpios = <&gpx0 5 GPIO_ACTIVE_LOW>;
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			debounce-interval = <10>;
+			gpios = <&gpx0 2 GPIO_ACTIVE_LOW>;
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			debounce-interval = <10>;
+			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&cci {
+	/* CCI is disabled in hardware */
+	status = "disabled";
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap", "s2mps11_cp",
+					     "s2mps11_bt";
+		};
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF_1V1";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D_1V0";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_KFC_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO_1V4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO_2V0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO_3V5";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "VDD_CAM_ISP_1V0";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3550000>;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE_1.0V";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_APIO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_APIO_MMC01_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_ADC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				/* Unused */
+				regulator-name = "VDD_LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MIPI_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_MIPI_PLL_ABB1_18V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				/* Unused */
+				regulator-name = "VDD_LDO8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_UOTG_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_PRE_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_HSIC_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_APIO_MMC2_2V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_MOTOR_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_LDO15";
+				/*
+				 * LDO15 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_AP_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "VDD_LDO17";
+				/*
+				 * LDO17 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo18_reg: LDO18 {
+				/* Unused */
+				regulator-name = "VDD_LDO18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_VTF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD_CAM1_CAM_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_CAM_IO_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDD_CAM0_S_CORE_1V1";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_MIFS_1V1";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD_TSP_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "VDD_LDO25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD_CAM0_AF_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VDD_G3DS_1V0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VDD_LDO28";
+				/*
+				 * LDO28 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo29_reg: LDO29 {
+				regulator-name = "VDD_LDO29";
+				/*
+				 * LDO29 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "VDD_TOUCH_1V8";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "VDD_LDO31";
+				/*
+				 * LDO31 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VDD_LDO32";
+				/*
+				 * LDO32 varies between devices and is
+				 * specified in the device dts
+				 */
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VDD_MHL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VDD_MHL_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "VDD_SIL_1V2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "VDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "VDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VDD_KEY_LED_3V3";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mixer {
+	status = "okay";
+};
+
+/* Internal storage */
+&mmc_0 {
+	status = "okay";
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	vqmmc-supply = <&ldo3_reg>;
+};
+
+/* External sdcard */
+&mmc_2 {
+	status = "okay";
+	bus-width = <4>;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	cd-gpios = <&gpx2 4 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sd2_clk &sd2_cmd &mmc2_cd &sd2_bus1 &sd2_bus4>;
+	pinctrl-names = "default";
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+};
+
+&pinctrl_0 {
+	mmc2_cd: mmc2-cd-pins {
+		samsung,pins = "gpx2-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx3-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5420-klimt-wifi.dts b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
new file mode 100644
index 000000000000..011787b1bbf0
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5420-klimt-wifi.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos5420 Klimt WiFi board device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Henrik Grimler
+ */
+
+/dts-v1/;
+#include "exynos5420-galaxy-tab-common.dtsi"
+
+/ {
+	model = "Samsung Klimt WiFi based on Exynos5420";
+	compatible = "samsung,klimt-wifi", "samsung,exynos5420", \
+		     "samsung,exynos5";
+};
+
+&ldo15_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO15";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&ldo17_reg {
+	regulator-name = "VDD_VCI_3V0";
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo28_reg {
+	regulator-name = "VDD3_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo29_reg {
+	regulator-name = "VDDR_1V6";
+	regulator-min-microvolt = <1600000>;
+	regulator-max-microvolt = <1600000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&ldo31_reg {
+	/* Unused */
+	regulator-name = "VDD_LDO31";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+};
+
+&ldo32_reg {
+	regulator-name = "VDD_TSP_1V8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+
+	regulator-state-mem {
+		regulator-off-in-suspend;
+	};
+};
+
+&mmc_2 {
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 8f4d76c5e11c..7a48f2b32819 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Google Peach Pit Rev 6+ board device tree source
  *
  * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
@@ -14,7 +11,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
 
 / {
 	model = "Google Peach Pit Rev 6+";
@@ -27,10 +26,14 @@
 		"google,pit-rev7", "google,pit-rev6",
 		"google,pit", "google,peach","samsung,exynos5420",
 		"samsung,exynos5";
+	chassis-type = "laptop";
 
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* uSD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -60,11 +63,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -73,11 +76,12 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -87,6 +91,14 @@
 		samsung,model = "Peach-Pit-I2S-MAX98090";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98090>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98090>, <&hdmi>;
+		};
 	};
 
 	usb300_vbus_reg: regulator-usb300 {
@@ -94,7 +106,7 @@
 		regulator-name = "P5.0V_USB3CON0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -105,7 +117,7 @@
 		regulator-name = "P5.0V_USB3CON1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -130,7 +142,7 @@
 		};
 	};
 
-	mmc1_pwrseq: mmc1_pwrseq {
+	mmc1_pwrseq: mmc1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
 		clocks = <&max77802 MAX77802_CLK_32K_CP>;
@@ -143,20 +155,31 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x06>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
+	hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 
 	ports {
-		port@0 {
+		port {
 			dp_out: endpoint {
 				remote-endpoint = <&bridge_in>;
 			};
@@ -171,7 +194,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -186,13 +209,13 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	max77802: max77802-pmic@9 {
+	max77802: pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&gpx3>;
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -271,7 +294,6 @@
 				regulator-name = "vdd_1v2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -412,7 +434,6 @@
 				regulator-name = "vdd_ldo9";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-mode = <MAX77802_OPMODE_LP>;
@@ -598,15 +619,16 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	max98090: codec@10 {
+	max98090: audio-codec@10 {
 		compatible = "maxim,max98090";
 		reg = <0x10>;
-		interrupts = <2 0>;
+		interrupts = <2 IRQ_TYPE_NONE>;
 		interrupt-parent = <&gpx0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max98090_irq>;
 		clocks = <&pmu_system_controller 0>;
 		clock-names = "mclk";
+		#sound-dai-cells = <0>;
 	};
 
 	light-sensor@44 {
@@ -624,13 +646,20 @@
 		use-external-pwm;
 
 		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
 			port@0 {
+				reg = <0>;
+
 				bridge_out: endpoint {
 					remote-endpoint = <&panel_in>;
 				};
 			};
 
 			port@1 {
+				reg = <1>;
+
 				bridge_in: endpoint {
 					remote-endpoint = <&dp_out>;
 				};
@@ -684,17 +713,22 @@
 };
 
 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
+	status = "okay";
+};
+
+&mixer {
 	status = "okay";
 };
 
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
-	broken-cd;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -706,13 +740,12 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
-	num-slots = <1>;
-	broken-cd;
+	non-removable;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
@@ -726,9 +759,9 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
@@ -745,176 +778,174 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98090_irq: max98090-irq {
+	max98090_irq: max98090-irq-pins {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <2>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
@@ -925,22 +956,23 @@
 	status = "okay";
 	num-cs = <1>;
 	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
 
 	cros_ec: cros-ec@0 {
 		compatible = "google,cros-ec-spi";
 		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
+		interrupts = <5 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_spi_cs &ec_irq>;
 		reg = <0>;
 		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
 		};
 
-		i2c-tunnel {
+		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -1031,6 +1063,40 @@
 	status = "okay";
 };
 
+&timer {
+	arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 8b153166ebdb..14cf9c4ca0ed 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Samsung's Exynos5420 SoC pin-mux and pin-config device tree source
  *
@@ -6,717 +7,728 @@
  *
  * Samsung's Exynos5420 SoC pin-mux and pin-config options are listed as device
  * tree nodes are listed in this file.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/ {
-	pinctrl@13400000 {
-		gpy7: gpy7 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx0: gpx0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
-				     <26 0>, <26 1>, <27 0>, <27 1>;
-		};
-
-		gpx1: gpx1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			interrupt-parent = <&combiner>;
-			#interrupt-cells = <2>;
-			interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
-				     <30 0>, <30 1>, <31 0>, <31 1>;
-		};
-
-		gpx2: gpx2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpx3: gpx3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		dp_hpd: dp_hpd {
-			samsung,pins = "gpx0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@13410000 {
-		gpc0: gpc0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc1: gpc1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc2: gpc2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc3: gpc3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpc4: gpc4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpd1: gpd1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpy0: gpy0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy1: gpy1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy2: gpy2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy3: gpy3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy4: gpy4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy5: gpy5 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpy6: gpy6 {
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		sd0_clk: sd0-clk {
-			samsung,pins = "gpc0-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cmd: sd0-cmd {
-			samsung,pins = "gpc0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_cd: sd0-cd {
-			samsung,pins = "gpc0-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus1: sd0-bus-width1 {
-			samsung,pins = "gpc0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus4: sd0-bus-width4 {
-			samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_bus8: sd0-bus-width8 {
-			samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_clk: sd1-clk {
-			samsung,pins = "gpc1-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd0_rclk: sd0-rclk {
-			samsung,pins = "gpc0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <1>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cmd: sd1-cmd {
-			samsung,pins = "gpc1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_cd: sd1-cd {
-			samsung,pins = "gpc1-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_int: sd1-int {
-			samsung,pins = "gpd1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		sd1_bus1: sd1-bus-width1 {
-			samsung,pins = "gpc1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus4: sd1-bus-width4 {
-			samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd1_bus8: sd1-bus-width8 {
-			samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_clk: sd2-clk {
-			samsung,pins = "gpc2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cmd: sd2-cmd {
-			samsung,pins = "gpc2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_cd: sd2-cd {
-			samsung,pins = "gpc2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus1: sd2-bus-width1 {
-			samsung,pins = "gpc2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-
-		sd2_bus4: sd2-bus-width4 {
-			samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <3>;
-		};
-	};
-
-	pinctrl@14000000 {
-		gpe0: gpe0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpe1: gpe1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf0: gpf0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpf1: gpf1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg0: gpg0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg1: gpg1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpg2: gpg2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpj4: gpj4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		cam_gpio_a: cam-gpio-a {
-			samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
-				       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
-				       "gpe1-0", "gpe1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_gpio_b: cam-gpio-b {
-			samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
-				       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c2_bus: cam-i2c2-bus {
-			samsung,pins = "gpf0-4", "gpf0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-		cam_spi1_bus: cam-spi1-bus {
-			samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c1_bus: cam-i2c1-bus {
-			samsung,pins = "gpf0-2", "gpf0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_i2c0_bus: cam-i2c0-bus {
-			samsung,pins = "gpf0-0", "gpf0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_spi0_bus: cam-spi0-bus {
-			samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		cam_bayrgb_bus: cam-bayrgb-bus {
-			samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
-				       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
-				       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
-				       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
-				       "gpg2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@14010000 {
-		gpa0: gpa0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa1: gpa1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpa2: gpa2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb0: gpb0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb1: gpb1 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb2: gpb2 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb3: gpb3 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gpb4: gpb4 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		gph0: gph0 {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		uart0_data: uart0-data {
-			samsung,pins = "gpa0-0", "gpa0-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart0_fctl: uart0-fctl {
-			samsung,pins = "gpa0-2", "gpa0-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_data: uart1-data {
-			samsung,pins = "gpa0-4", "gpa0-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart1_fctl: uart1-fctl {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c2_bus: i2c2-bus {
-			samsung,pins = "gpa0-6", "gpa0-7";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_data: uart2-data {
-			samsung,pins = "gpa1-0", "gpa1-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart2_fctl: uart2-fctl {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c3_bus: i2c3-bus {
-			samsung,pins = "gpa1-2", "gpa1-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		uart3_data: uart3-data {
-			samsung,pins = "gpa1-4", "gpa1-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi0_bus: spi0-bus {
-			samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi1_bus: spi1-bus {
-			samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c4_hs_bus: i2c4-hs-bus {
-			samsung,pins = "gpa2-0", "gpa2-1";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c5_hs_bus: i2c5-hs-bus {
-			samsung,pins = "gpa2-2", "gpa2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s1_bus: i2s1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm1_bus: pcm1-bus {
-			samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
-					"gpb0-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2s2_bus: i2s2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pcm2_bus: pcm2-bus {
-			samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
-					"gpb1-4";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spdif_bus: spdif-bus {
-			samsung,pins = "gpb1-0", "gpb1-1";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		spi2_bus: spi2-bus {
-			samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
-			samsung,pin-function = <5>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c6_hs_bus: i2c6-hs-bus {
-			samsung,pins = "gpb1-3", "gpb1-4";
-			samsung,pin-function = <4>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm0_out: pwm0-out {
-			samsung,pins = "gpb2-0";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm1_out: pwm1-out {
-			samsung,pins = "gpb2-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm2_out: pwm2-out {
-			samsung,pins = "gpb2-2";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		pwm3_out: pwm3-out {
-			samsung,pins = "gpb2-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c7_hs_bus: i2c7-hs-bus {
-			samsung,pins = "gpb2-2", "gpb2-3";
-			samsung,pin-function = <3>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c0_bus: i2c0-bus {
-			samsung,pins = "gpb3-0", "gpb3-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c1_bus: i2c1-bus {
-			samsung,pins = "gpb3-2", "gpb3-3";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c8_hs_bus: i2c8-hs-bus {
-			samsung,pins = "gpb3-4", "gpb3-5";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c9_hs_bus: i2c9-hs-bus {
-			samsung,pins = "gpb3-6", "gpb3-7";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-
-		i2c10_hs_bus: i2c10-hs-bus {
-			samsung,pins = "gpb4-0", "gpb4-1";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <3>;
-			samsung,pin-drv = <0>;
-		};
-	};
-
-	pinctrl@03860000 {
-		gpz: gpz {
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			interrupt-controller;
-			#interrupt-cells = <2>;
-		};
-
-		i2s0_bus: i2s0-bus {
-			samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
-					"gpz-4", "gpz-5", "gpz-6";
-			samsung,pin-function = <2>;
-			samsung,pin-pud = <0>;
-			samsung,pin-drv = <0>;
-		};
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_0 {
+	gpy7: gpy7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx0: gpx0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <23 0>, <24 0>, <25 0>, <25 1>,
+			     <26 0>, <26 1>, <27 0>, <27 1>;
+	};
+
+	gpx1: gpx1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&combiner>;
+		#interrupt-cells = <2>;
+		interrupts = <28 0>, <28 1>, <29 0>, <29 1>,
+			     <30 0>, <30 1>, <31 0>, <31 1>;
+	};
+
+	gpx2: gpx2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpx3: gpx3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	dp_hpd: dp-hpd-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	hdmi_cec: hdmi-cec-pins {
+		samsung,pins = "gpx3-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_1 {
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc2: gpc2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc3: gpc3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc4: gpc4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd1: gpd1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpy0: gpy0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy1: gpy1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy2: gpy2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy3: gpy3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy4: gpy4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy5: gpy5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	gpy6: gpy6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	sd0_clk: sd0-clk-pins {
+		samsung,pins = "gpc0-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cmd: sd0-cmd-pins {
+		samsung,pins = "gpc0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_cd: sd0-cd-pins {
+		samsung,pins = "gpc0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus1: sd0-bus-width1-pins {
+		samsung,pins = "gpc0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus4: sd0-bus-width4-pins {
+		samsung,pins = "gpc0-4", "gpc0-5", "gpc0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_bus8: sd0-bus-width8-pins {
+		samsung,pins = "gpc3-0", "gpc3-1", "gpc3-2", "gpc3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd0_rclk: sd0-rclk-pins {
+		samsung,pins = "gpc0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_clk: sd1-clk-pins {
+		samsung,pins = "gpc1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_cmd: sd1-cmd-pins {
+		samsung,pins = "gpc1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_cd: sd1-cd-pins {
+		samsung,pins = "gpc1-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_int: sd1-int-pins {
+		samsung,pins = "gpd1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	sd1_bus1: sd1-bus-width1-pins {
+		samsung,pins = "gpc1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_bus4: sd1-bus-width4-pins {
+		samsung,pins = "gpc1-4", "gpc1-5", "gpc1-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd1_bus8: sd1-bus-width8-pins {
+		samsung,pins = "gpd1-4", "gpd1-5", "gpd1-6", "gpd1-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_clk: sd2-clk-pins {
+		samsung,pins = "gpc2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cmd: sd2-cmd-pins {
+		samsung,pins = "gpc2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_cd: sd2-cd-pins {
+		samsung,pins = "gpc2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus1: sd2-bus-width1-pins {
+		samsung,pins = "gpc2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_bus4: sd2-bus-width4-pins {
+		samsung,pins = "gpc2-4", "gpc2-5", "gpc2-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+
+	sd2_wp: sd2-wp-pins {
+		samsung,pins = "gpc4-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV4>;
+	};
+};
+
+&pinctrl_2 {
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpj4: gpj4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	cam_gpio_a: cam-gpio-a-pins {
+		samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
+			       "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
+			       "gpe1-0", "gpe1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_gpio_b: cam-gpio-b-pins {
+		samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3",
+			       "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_i2c2_bus: cam-i2c2-bus-pins {
+		samsung,pins = "gpf0-4", "gpf0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_spi1_bus: cam-spi1-bus-pins {
+		samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_i2c1_bus: cam-i2c1-bus-pins {
+		samsung,pins = "gpf0-2", "gpf0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_i2c0_bus: cam-i2c0-bus-pins {
+		samsung,pins = "gpf0-0", "gpf0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_spi0_bus: cam-spi0-bus-pins {
+		samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	cam_bayrgb_bus: cam-bayrgb-bus-pins {
+		samsung,pins = "gpg0-0", "gpg0-1", "gpg0-2", "gpg0-3",
+			       "gpg0-4", "gpg0-5", "gpg0-6", "gpg0-7",
+			       "gpg1-0", "gpg1-1", "gpg1-2", "gpg1-3",
+			       "gpg1-4", "gpg1-5", "gpg1-6", "gpg1-7",
+			       "gpg2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_3 {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb3: gpb3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb4: gpb4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	uart0_data: uart0-data-pins {
+		samsung,pins = "gpa0-0", "gpa0-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart0_fctl: uart0-fctl-pins {
+		samsung,pins = "gpa0-2", "gpa0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_data: uart1-data-pins {
+		samsung,pins = "gpa0-4", "gpa0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart1_fctl: uart1-fctl-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c2_bus: i2c2-bus-pins {
+		samsung,pins = "gpa0-6", "gpa0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_data: uart2-data-pins {
+		samsung,pins = "gpa1-0", "gpa1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart2_fctl: uart2-fctl-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c3_bus: i2c3-bus-pins {
+		samsung,pins = "gpa1-2", "gpa1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	uart3_data: uart3-data-pins {
+		samsung,pins = "gpa1-4", "gpa1-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi0_bus: spi0-bus-pins {
+		samsung,pins = "gpa2-0", "gpa2-1", "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi1_bus: spi1-bus-pins {
+		samsung,pins = "gpa2-4", "gpa2-6", "gpa2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c4_hs_bus: i2c4-hs-bus-pins {
+		samsung,pins = "gpa2-0", "gpa2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c5_hs_bus: i2c5-hs-bus-pins {
+		samsung,pins = "gpa2-2", "gpa2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2s1_bus: i2s1-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pcm1_bus: pcm1-bus-pins {
+		samsung,pins = "gpb0-0", "gpb0-1", "gpb0-2", "gpb0-3",
+			       "gpb0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2s2_bus: i2s2-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pcm2_bus: pcm2-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3",
+			       "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spdif_bus: spdif-bus-pins {
+		samsung,pins = "gpb1-0", "gpb1-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	spi2_bus: spi2-bus-pins {
+		samsung,pins = "gpb1-1", "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c6_hs_bus: i2c6-hs-bus-pins {
+		samsung,pins = "gpb1-3", "gpb1-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm0_out: pwm0-out-pins {
+		samsung,pins = "gpb2-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm1_out: pwm1-out-pins {
+		samsung,pins = "gpb2-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm2_out: pwm2-out-pins {
+		samsung,pins = "gpb2-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	pwm3_out: pwm3-out-pins {
+		samsung,pins = "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c7_hs_bus: i2c7-hs-bus-pins {
+		samsung,pins = "gpb2-2", "gpb2-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c0_bus: i2c0-bus-pins {
+		samsung,pins = "gpb3-0", "gpb3-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c1_bus: i2c1-bus-pins {
+		samsung,pins = "gpb3-2", "gpb3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c8_hs_bus: i2c8-hs-bus-pins {
+		samsung,pins = "gpb3-4", "gpb3-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c9_hs_bus: i2c9-hs-bus-pins {
+		samsung,pins = "gpb3-6", "gpb3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	i2c10_hs_bus: i2c10-hs-bus-pins {
+		samsung,pins = "gpb4-0", "gpb4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&pinctrl_4 {
+	gpz: gpz-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	i2s0_bus: i2s0-bus-pins {
+		samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+				"gpz-4", "gpz-5", "gpz-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 98871f972c8a..e299344e427a 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -1,27 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG SMDK5420 board device tree source
+ * Samsung SMDK5420 board device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos5420.dtsi"
+#include "exynos5420-cpus.dtsi"
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Samsung SMDK5420 board based on EXYNOS5420";
+	model = "Samsung SMDK5420 board based on Exynos5420";
 	compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
+	aliases {
+		mmc0 = &mmc_0;
+		mmc1 = &mmc_2;
+	};
+
 	chosen {
-		bootargs = "console=ttySAC2,115200 init=/linuxrc";
+		bootargs = "init=/linuxrc";
+		stdout-path = "serial2:115200n8";
 	};
 
 	fixed-rate-clocks {
@@ -31,56 +38,47 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		vdd: fixed-regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vdd-supply";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	vdd: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
 
-		dbvdd: fixed-regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "dbvdd-supply";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	dbvdd: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "dbvdd-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		spkvdd: fixed-regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "spkvdd-supply";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	spkvdd: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "spkvdd-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
-	usb300_vbus_reg: regulator-usb300 {
+	usb300_vbus_reg: regulator-3 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg0 5 0>;
+		gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
 	};
 
-	usb301_vbus_reg: regulator-usb301 {
+	usb301_vbus_reg: regulator-4 {
 		compatible = "regulator-fixed";
 		regulator-name = "VBUS1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpg1 4 0>;
+		gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -88,23 +86,26 @@
 
 };
 
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <4>;
 	status = "okay";
-};
 
-&fimd {
-	status = "okay";
 	display-timings {
 		native-mode = <&timing0>;
-		timing0: timing@0 {
+		timing0: timing {
 			clock-frequency = <50000>;
 			hactive = <2560>;
 			vactive = <1600>;
@@ -118,28 +119,31 @@
 	};
 };
 
+&fimd {
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 0>;
+	ddc = <&i2c_2>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
+	vdd-supply = <&ldo6_reg>;
+	vdd_osc-supply = <&ldo7_reg>;
+	vdd_pll-supply = <&ldo6_reg>;
 };
 
 &hsi2c_4 {
 	status = "okay";
 
-	s2mps11_pmic@66 {
+	pmic@66 {
 		compatible = "samsung,s2mps11-pmic";
 		reg = <0x66>;
-		s2mps11,buck2-ramp-delay = <12>;
-		s2mps11,buck34-ramp-delay = <12>;
-		s2mps11,buck16-ramp-delay = <12>;
-		s2mps11,buck6-ramp-enable = <1>;
-		s2mps11,buck2-ramp-enable = <1>;
-		s2mps11,buck3-ramp-enable = <1>;
-		s2mps11,buck4-ramp-enable = <1>;
+		wakeup-source;
 
 		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
 			#clock-cells = <1>;
 			clock-output-names = "s2mps11_ap",
 					"s2mps11_cp", "s2mps11_bt";
@@ -344,23 +348,19 @@
 &i2c_2 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
+	/* used by HDMI DDC */
 	status = "okay";
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+&mixer {
+	status = "okay";
 };
 
 &mmc_0 {
 	status = "okay";
 	broken-cd;
 	card-detect-delay = <200>;
+	mmc-ddr-1_8v;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
 	samsung,dw-mshc-ddr-timing = <0 2>;
@@ -386,32 +386,44 @@
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_2 {
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gpg0-5";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gpg1-4";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &rtc {
 	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd3_0 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo11_reg>;
+	vdd33-supply = <&ldo9_reg>;
 };
 
 &usbdrd_phy0 {
diff --git a/arch/arm/boot/dts/exynos5420-trip-points.dtsi b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
index 2180a0152c9b..a67a380717ec 100644
--- a/arch/arm/boot/dts/exynos5420-trip-points.dtsi
+++ b/arch/arm/boot/dts/exynos5420-trip-points.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Device tree sources for default Exynos5420 thermal zone definition
  *
  * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 polling-delay-passive = <0>;
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 534f27ceb10b..dd291f1199f2 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -1,44 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5420 SoC device tree source
+ * Samsung Exynos5420 SoC device tree source
  *
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
- * EXYNOS5420 based board files can include this file and provide
+ * Samsung Exynos5420 SoC device nodes are listed in this file.
+ * Exynos5420 based board files can include this file and provide
  * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
+#include "exynos54xx.dtsi"
 #include <dt-bindings/clock/exynos5420.h>
-#include "exynos5.dtsi"
-#include "exynos5420-pinctrl.dtsi"
-
 #include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	compatible = "samsung,exynos5420", "samsung,exynos5";
 
 	aliases {
-		mshc0 = &mmc_0;
-		mshc1 = &mmc_1;
-		mshc2 = &mmc_2;
 		pinctrl0 = &pinctrl_0;
 		pinctrl1 = &pinctrl_1;
 		pinctrl2 = &pinctrl_2;
 		pinctrl3 = &pinctrl_3;
 		pinctrl4 = &pinctrl_4;
-		i2c0 = &i2c_0;
-		i2c1 = &i2c_1;
-		i2c2 = &i2c_2;
-		i2c3 = &i2c_3;
-		i2c4 = &hsi2c_4;
-		i2c5 = &hsi2c_5;
-		i2c6 = &hsi2c_6;
-		i2c7 = &hsi2c_7;
 		i2c8 = &hsi2c_8;
 		i2c9 = &hsi2c_9;
 		i2c10 = &hsi2c_10;
@@ -47,1081 +32,1176 @@
 		spi0 = &spi_0;
 		spi1 = &spi_1;
 		spi2 = &spi_2;
-		usbdrdphy0 = &usbdrd_phy0;
-		usbdrdphy1 = &usbdrd_phy1;
 	};
 
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
+	bus_disp1: bus-disp1 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
 
-		cpu0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x0>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
-		};
+	bus_disp1_fimd: bus-disp1-fimd {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys: bus-fsys {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys2: bus-fsys2 {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_fsys_apb: bus-fsys-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d: bus-g2d {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_g2d_acp: bus-g2d-acp {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266_G2D>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+	bus_gen: bus-gen {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK266>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_gscl_scaler: bus-gscl-scaler {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg: bus-jpeg {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_jpeg_apb: bus-jpeg-apb {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK166>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mfc: bus-mfc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK333>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_mscl: bus-mscl {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_noc: bus-noc {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK100_NOC>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	bus_peri: bus-peri {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK66>;
+		clock-names = "bus";
+		status = "disabled";
+	};
 
-		cpu1: cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x1>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+	bus_wcore: bus-wcore {
+		compatible = "samsung,exynos-bus";
+		clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
+		clock-names = "bus";
+		status = "disabled";
+	};
+
+	/*
+	 * The 'cpus' node is not present here but instead it is provided
+	 * by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
+	 */
+
+	cluster_a15_opp_table: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1250000 1250000 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <1212500 1212500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1600000000 {
+			opp-hz = /bits/ 64 <1600000000>;
+			opp-microvolt = <1175000 1175000 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1500000000 {
+			opp-hz = /bits/ 64 <1500000000>;
+			opp-microvolt = <1137500 1137500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <1112500 1112500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1062500 1062500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1037500 1037500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1012500 1012500 1500000>;
+			clock-latency-ns = <140000>;
 		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = < 987500 987500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = < 962500 962500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = < 937500 937500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = < 912500 912500 1500000>;
+			clock-latency-ns = <140000>;
+		};
+	};
+
+	cluster_a7_opp_table: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
 
-		cpu2: cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x2>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1275000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1212500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1100000000 {
+			opp-hz = /bits/ 64 <1100000000>;
+			opp-microvolt = <1162500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <1112500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-900000000 {
+			opp-hz = /bits/ 64 <900000000>;
+			opp-microvolt = <1062500>;
+			clock-latency-ns = <140000>;
+		};
+		opp-800000000 {
+			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <1025000>;
+			clock-latency-ns = <140000>;
 		};
+		opp-700000000 {
+			opp-hz = /bits/ 64 <700000000>;
+			opp-microvolt = <975000>;
+			clock-latency-ns = <140000>;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <937500>;
+			clock-latency-ns = <140000>;
+		};
+	};
 
-		cpu3: cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0x3>;
-			clock-frequency = <1800000000>;
-			cci-control-port = <&cci_control1>;
+	soc: soc {
+		cci: cci@10d20000 {
+			compatible = "arm,cci-400";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x10d20000 0x1000>;
+			ranges = <0x0 0x10d20000 0x6000>;
+
+			cci_control0: slave-if@4000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x4000 0x1000>;
+			};
+			cci_control1: slave-if@5000 {
+				compatible = "arm,cci-400-ctrl-if";
+				interface-type = "ace";
+				reg = <0x5000 0x1000>;
+			};
 		};
 
-		cpu4: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x100>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		clock: clock-controller@10010000 {
+			compatible = "samsung,exynos5420-clock", "syscon";
+			reg = <0x10010000 0x30000>;
+			#clock-cells = <1>;
 		};
 
-		cpu5: cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x101>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		clock_audss: audss-clock-controller@3810000 {
+			compatible = "samsung,exynos5420-audss-clock";
+			reg = <0x03810000 0x0c>;
+			#clock-cells = <1>;
+			clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
+				 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
+			clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
+			power-domains = <&mau_pd>;
 		};
 
-		cpu6: cpu@102 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x102>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		mfc: codec@11000000 {
+			compatible = "samsung,mfc-v7";
+			reg = <0x11000000 0x10000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MFC>;
+			clock-names = "mfc";
+			power-domains = <&mfc_pd>;
+			iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
+			iommu-names = "left", "right";
 		};
 
-		cpu7: cpu@103 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a7";
-			reg = <0x103>;
-			clock-frequency = <1000000000>;
-			cci-control-port = <&cci_control0>;
+		mmc_0: mmc@12200000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12200000 0x2000>;
+			clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
-	};
 
-	cci: cci@10d20000 {
-		compatible = "arm,cci-400";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x10d20000 0x1000>;
-		ranges = <0x0 0x10d20000 0x6000>;
+		mmc_1: mmc@12210000 {
+			compatible = "samsung,exynos5420-dw-mshc-smu";
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12210000 0x2000>;
+			clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
+		};
 
-		cci_control0: slave-if@4000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x4000 0x1000>;
+		mmc_2: mmc@12220000 {
+			compatible = "samsung,exynos5420-dw-mshc";
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x12220000 0x1000>;
+			clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
+			clock-names = "biu", "ciu";
+			fifo-depth = <0x40>;
+			status = "disabled";
 		};
-		cci_control1: slave-if@5000 {
-			compatible = "arm,cci-400-ctrl-if";
-			interface-type = "ace";
-			reg = <0x5000 0x1000>;
+
+		dmc: memory-controller@10c20000 {
+			compatible = "samsung,exynos5422-dmc";
+			reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
+			clocks = <&clock CLK_FOUT_SPLL>,
+				 <&clock CLK_MOUT_SCLK_SPLL>,
+				 <&clock CLK_FF_DOUT_SPLL2>,
+				 <&clock CLK_FOUT_BPLL>,
+				 <&clock CLK_MOUT_BPLL>,
+				 <&clock CLK_SCLK_BPLL>,
+				 <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+				 <&clock CLK_MOUT_MCLK_CDREX>;
+			clock-names = "fout_spll",
+				      "mout_sclk_spll",
+				      "ff_dout_spll2",
+				      "fout_bpll",
+				      "mout_bpll",
+				      "sclk_bpll",
+				      "mout_mx_mspll_ccore",
+				      "mout_mclk_cdrex";
+			samsung,syscon-clk = <&clock>;
+			status = "disabled";
 		};
-	};
 
-	sysram@02020000 {
-		compatible = "mmio-sram";
-		reg = <0x02020000 0x54000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0 0x02020000 0x54000>;
+		nocp_mem0_0: nocp@10ca1000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10ca1000 0x200>;
+			status = "disabled";
+		};
 
-		smp-sysram@0 {
-			compatible = "samsung,exynos4210-sysram";
-			reg = <0x0 0x1000>;
+		nocp_mem0_1: nocp@10ca1400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10ca1400 0x200>;
+			status = "disabled";
 		};
 
-		smp-sysram@53000 {
-			compatible = "samsung,exynos4210-sysram-ns";
-			reg = <0x53000 0x1000>;
+		nocp_mem1_0: nocp@10ca1800 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10ca1800 0x200>;
+			status = "disabled";
 		};
-	};
 
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5420-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-	};
+		nocp_mem1_1: nocp@10ca1c00 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x10ca1c00 0x200>;
+			status = "disabled";
+		};
 
-	clock_audss: audss-clock-controller@3810000 {
-		compatible = "samsung,exynos5420-audss-clock";
-		reg = <0x03810000 0x0C>;
-		#clock-cells = <1>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
-			 <&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
-		clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
-	};
+		nocp_g3d_0: nocp@11a51000 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11a51000 0x200>;
+			status = "disabled";
+		};
 
-	mfc: codec@11000000 {
-		compatible = "samsung,mfc-v7";
-		reg = <0x11000000 0x10000>;
-		interrupts = <0 96 0>;
-		clocks = <&clock CLK_MFC>;
-		clock-names = "mfc";
-		power-domains = <&mfc_pd>;
-		iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
-		iommu-names = "left", "right";
-	};
+		nocp_g3d_1: nocp@11a51400 {
+			compatible = "samsung,exynos5420-nocp";
+			reg = <0x11a51400 0x200>;
+			status = "disabled";
+		};
 
-	mmc_0: mmc@12200000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12200000 0x2000>;
-		clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		ppmu_dmc0_0: ppmu@10d00000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d00000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_0: ppmu-event3-dmc0-0 {
+					event-name = "ppmu-event3-dmc0-0";
+				};
+			};
+		};
 
-	mmc_1: mmc@12210000 {
-		compatible = "samsung,exynos5420-dw-mshc-smu";
-		interrupts = <0 76 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12210000 0x2000>;
-		clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		ppmu_dmc0_1: ppmu@10d10000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d10000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc0_1: ppmu-event3-dmc0-1 {
+					event-name = "ppmu-event3-dmc0-1";
+				};
+			};
+		};
 
-	mmc_2: mmc@12220000 {
-		compatible = "samsung,exynos5420-dw-mshc";
-		interrupts = <0 77 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x12220000 0x1000>;
-		clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
-		clock-names = "biu", "ciu";
-		fifo-depth = <0x40>;
-		status = "disabled";
-	};
+		ppmu_dmc1_0: ppmu@10d60000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d60000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_0: ppmu-event3-dmc1-0 {
+					event-name = "ppmu-event3-dmc1-0";
+				};
+			};
+		};
 
-	mct: mct@101C0000 {
-		compatible = "samsung,exynos4210-mct";
-		reg = <0x101C0000 0x800>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		interrupt-parent = <&mct_map>;
-		interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
-				<8>, <9>, <10>, <11>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
-		clock-names = "fin_pll", "mct";
-
-		mct_map: mct-map {
-			#interrupt-cells = <1>;
-			#address-cells = <0>;
-			#size-cells = <0>;
-			interrupt-map = <0 &combiner 23 3>,
-					<1 &combiner 23 4>,
-					<2 &combiner 25 2>,
-					<3 &combiner 25 3>,
-					<4 &gic 0 120 0>,
-					<5 &gic 0 121 0>,
-					<6 &gic 0 122 0>,
-					<7 &gic 0 123 0>,
-					<8 &gic 0 128 0>,
-					<9 &gic 0 129 0>,
-					<10 &gic 0 130 0>,
-					<11 &gic 0 131 0>;
+		ppmu_dmc1_1: ppmu@10d70000 {
+			compatible = "samsung,exynos-ppmu";
+			reg = <0x10d70000 0x2000>;
+			clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
+			clock-names = "ppmu";
+			events {
+				ppmu_event3_dmc1_1: ppmu-event3-dmc1-1 {
+					event-name = "ppmu-event3-dmc1-1";
+				};
+			};
 		};
-	};
 
-	gsc_pd: power-domain@10044000 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044000 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
-		clock-names = "asb0", "asb1";
-	};
+		gsc_pd: power-domain@10044000 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044000 0x20>;
+			#power-domain-cells = <0>;
+			label = "GSC";
+		};
 
-	isp_pd: power-domain@10044020 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044020 0x20>;
-		#power-domain-cells = <0>;
-	};
+		isp_pd: power-domain@10044020 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044020 0x20>;
+			#power-domain-cells = <0>;
+			label = "ISP";
+		};
 
-	mfc_pd: power-domain@10044060 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044060 0x20>;
-		clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_USER_ACLK333>;
-		clock-names = "oscclk", "clk0";
-		#power-domain-cells = <0>;
-	};
+		mfc_pd: power-domain@10044060 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044060 0x20>;
+			#power-domain-cells = <0>;
+			label = "MFC";
+		};
 
-	msc_pd: power-domain@10044120 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x10044120 0x20>;
-		#power-domain-cells = <0>;
-	};
+		g3d_pd: power-domain@10044080 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044080 0x20>;
+			#power-domain-cells = <0>;
+			label = "G3D";
+		};
 
-	disp_pd: power-domain@100440C0 {
-		compatible = "samsung,exynos4210-pd";
-		reg = <0x100440C0 0x20>;
-		#power-domain-cells = <0>;
-		clocks = <&clock CLK_FIN_PLL>,
-			 <&clock CLK_MOUT_USER_ACLK200_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK300_DISP1>,
-			 <&clock CLK_MOUT_USER_ACLK400_DISP1>,
-			 <&clock CLK_FIMD1>, <&clock CLK_MIXER>;
-		clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
-	};
+		disp_pd: power-domain@100440c0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440c0 0x20>;
+			#power-domain-cells = <0>;
+			label = "DISP";
+		};
 
-	pinctrl_0: pinctrl@13400000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13400000 0x1000>;
-		interrupts = <0 45 0>;
+		mau_pd: power-domain@100440e0 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x100440e0 0x20>;
+			#power-domain-cells = <0>;
+			label = "MAU";
+		};
 
-		wakeup-interrupt-controller {
-			compatible = "samsung,exynos4210-wakeup-eint";
-			interrupt-parent = <&gic>;
-			interrupts = <0 32 0>;
+		msc_pd: power-domain@10044120 {
+			compatible = "samsung,exynos4210-pd";
+			reg = <0x10044120 0x20>;
+			#power-domain-cells = <0>;
+			label = "MSC";
 		};
-	};
 
-	pinctrl_1: pinctrl@13410000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x13410000 0x1000>;
-		interrupts = <0 78 0>;
-	};
+		pinctrl_0: pinctrl@13400000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13400000 0x1000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 
-	pinctrl_2: pinctrl@14000000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14000000 0x1000>;
-		interrupts = <0 46 0>;
-	};
+			wakeup-interrupt-controller {
+				compatible = "samsung,exynos4210-wakeup-eint";
+				interrupt-parent = <&gic>;
+				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
 
-	pinctrl_3: pinctrl@14010000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x14010000 0x1000>;
-		interrupts = <0 50 0>;
-	};
+		pinctrl_1: pinctrl@13410000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x13410000 0x1000>;
+			interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	pinctrl_4: pinctrl@03860000 {
-		compatible = "samsung,exynos5420-pinctrl";
-		reg = <0x03860000 0x1000>;
-		interrupts = <0 47 0>;
-	};
+		pinctrl_2: pinctrl@14000000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14000000 0x1000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		pinctrl_3: pinctrl@14010000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x14010000 0x1000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		};
 
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
+		pinctrl_4: pinctrl@3860000 {
+			compatible = "samsung,exynos5420-pinctrl";
+			reg = <0x03860000 0x1000>;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&mau_pd>;
+		};
 
-		adma: adma@03880000 {
+		adma: dma-controller@3880000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x03880000 0x1000>;
-			interrupts = <0 110 0>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock_audss EXYNOS_ADMA>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <6>;
-			#dma-requests = <16>;
+			power-domains = <&mau_pd>;
 		};
 
-		pdma0: pdma@121A0000 {
+		pdma0: dma-controller@121a0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121A0000 0x1000>;
-			interrupts = <0 34 0>;
+			reg = <0x121a0000 0x1000>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		pdma1: pdma@121B0000 {
+		pdma1: dma-controller@121b0000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x121B0000 0x1000>;
-			interrupts = <0 35 0>;
+			reg = <0x121b0000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_PDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <32>;
 		};
 
-		mdma0: mdma@10800000 {
+		mdma0: dma-controller@10800000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x10800000 0x1000>;
-			interrupts = <0 33 0>;
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA0>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 		};
 
-		mdma1: mdma@11C10000 {
+		mdma1: dma-controller@11c10000 {
 			compatible = "arm,pl330", "arm,primecell";
-			reg = <0x11C10000 0x1000>;
-			interrupts = <0 124 0>;
+			reg = <0x11c10000 0x1000>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clock CLK_MDMA1>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
-			#dma-channels = <8>;
-			#dma-requests = <1>;
 			/*
 			 * MDMA1 can support both secure and non-secure
-			 * AXI transactions. When this is enabled in the kernel
-			 * for boards that run in secure mode, we are getting
-			 * imprecise external aborts causing the kernel to oops.
+			 * AXI transactions. When this is enabled in
+			 * the kernel for boards that run in secure
+			 * mode, we are getting imprecise external
+			 * aborts causing the kernel to oops.
 			 */
 			status = "disabled";
 		};
-	};
-
-	i2s0: i2s@03830000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x03830000 0x100>;
-		dmas = <&adma 0
-			&adma 2
-			&adma 1>;
-		dma-names = "tx", "rx", "tx-sec";
-		clocks = <&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_I2S_BUS>,
-			<&clock_audss EXYNOS_SCLK_I2S>;
-		clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk0";
-		#sound-dai-cells = <1>;
-		samsung,idma-addr = <0x03000000>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s0_bus>;
-		status = "disabled";
-	};
-
-	i2s1: i2s@12D60000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D60000 0x100>;
-		dmas = <&pdma1 12
-			&pdma1 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk1";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s1_bus>;
-		status = "disabled";
-	};
 
-	i2s2: i2s@12D70000 {
-		compatible = "samsung,exynos5420-i2s";
-		reg = <0x12D70000 0x100>;
-		dmas = <&pdma0 12
-			&pdma0 11>;
-		dma-names = "tx", "rx";
-		clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
-		clock-names = "iis", "i2s_opclk0";
-		#clock-cells = <1>;
-		clock-output-names = "i2s_cdclk2";
-		#sound-dai-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2s2_bus>;
-		status = "disabled";
-	};
-
-	spi_0: spi@12d20000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d20000 0x100>;
-		interrupts = <0 68 0>;
-		dmas = <&pdma0 5
-			&pdma0 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi0_bus>;
-		clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_1: spi@12d30000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d30000 0x100>;
-		interrupts = <0 69 0>;
-		dmas = <&pdma1 5
-			&pdma1 4>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi1_bus>;
-		clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	spi_2: spi@12d40000 {
-		compatible = "samsung,exynos4210-spi";
-		reg = <0x12d40000 0x100>;
-		interrupts = <0 70 0>;
-		dmas = <&pdma0 7
-			&pdma0 6>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&spi2_bus>;
-		clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
-		clock-names = "spi", "spi_busclk0";
-		status = "disabled";
-	};
-
-	pwm: pwm@12dd0000 {
-		compatible = "samsung,exynos4210-pwm";
-		reg = <0x12dd0000 0x100>;
-		samsung,pwm-outputs = <0>, <1>, <2>, <3>;
-		#pwm-cells = <3>;
-		clocks = <&clock CLK_PWM>;
-		clock-names = "timers";
-	};
-
-	dp_phy: video-phy@10040728 {
-		compatible = "samsung,exynos5420-dp-video-phy";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <0>;
-	};
-
-	mipi_phy: video-phy@10040714 {
-		compatible = "samsung,s5pv210-mipi-video-phy";
-		syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	dsi@14500000 {
-		compatible = "samsung,exynos5410-mipi-dsi";
-		reg = <0x14500000 0x10000>;
-		interrupts = <0 82 0>;
-		phys = <&mipi_phy 1>;
-		phy-names = "dsim";
-		clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
-		clock-names = "bus_clk", "pll_clk";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
+		i2s0: i2s@3830000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x03830000 0x100>;
+			dmas = <&adma 0>,
+				<&adma 2>,
+				<&adma 1>;
+			dma-names = "tx", "rx", "tx-sec";
+			clocks = <&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_I2S_BUS>,
+				<&clock_audss EXYNOS_SCLK_I2S>;
+			clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk0";
+			#sound-dai-cells = <1>;
+			samsung,idma-addr = <0x03000000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s0_bus>;
+			power-domains = <&mau_pd>;
+			status = "disabled";
+		};
 
-	adc: adc@12D10000 {
-		compatible = "samsung,exynos-adc-v2";
-		reg = <0x12D10000 0x100>;
-		interrupts = <0 106 0>;
-		clocks = <&clock CLK_TSADC>;
-		clock-names = "adc";
-		#io-channel-cells = <1>;
-		io-channel-ranges;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-	};
+		i2s1: i2s@12d60000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12d60000 0x100>;
+			dmas = <&pdma1 12>,
+				<&pdma1 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk1";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s1_bus>;
+			status = "disabled";
+		};
 
-	i2c_0: i2c@12C60000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C60000 0x100>;
-		interrupts = <0 56 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C0>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c0_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		i2s2: i2s@12d70000 {
+			compatible = "samsung,exynos5420-i2s";
+			reg = <0x12d70000 0x100>;
+			dmas = <&pdma0 12>,
+				<&pdma0 11>;
+			dma-names = "tx", "rx";
+			clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
+			clock-names = "iis", "i2s_opclk0";
+			#clock-cells = <1>;
+			clock-output-names = "i2s_cdclk2";
+			#sound-dai-cells = <1>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2s2_bus>;
+			status = "disabled";
+		};
 
-	i2c_1: i2c@12C70000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C70000 0x100>;
-		interrupts = <0 57 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C1>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c1_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		spi_0: spi@12d20000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d20000 0x100>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 5
+				&pdma0 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi0_bus>;
+			clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	i2c_2: i2c@12C80000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C80000 0x100>;
-		interrupts = <0 58 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C2>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c2_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		spi_1: spi@12d30000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d30000 0x100>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma1 5
+				&pdma1 4>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi1_bus>;
+			clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	i2c_3: i2c@12C90000 {
-		compatible = "samsung,s3c2440-i2c";
-		reg = <0x12C90000 0x100>;
-		interrupts = <0 59 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_I2C3>;
-		clock-names = "i2c";
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c3_bus>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		status = "disabled";
-	};
+		spi_2: spi@12d40000 {
+			compatible = "samsung,exynos4210-spi";
+			reg = <0x12d40000 0x100>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&pdma0 7
+				&pdma0 6>;
+			dma-names = "tx", "rx";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&spi2_bus>;
+			clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
+			clock-names = "spi", "spi_busclk0";
+			status = "disabled";
+		};
 
-	hsi2c_4: i2c@12CA0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CA0000 0x1000>;
-		interrupts = <0 60 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_USI0>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		dsi: dsi@14500000 {
+			compatible = "samsung,exynos5410-mipi-dsi";
+			reg = <0x14500000 0x10000>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&mipi_phy 1>;
+			phy-names = "dsim";
+			clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
+			clock-names = "bus_clk", "pll_clk";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
 
-	hsi2c_5: i2c@12CB0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CB0000 0x1000>;
-		interrupts = <0 61 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_USI1>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_8: i2c@12e00000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12e00000 0x1000>;
+			interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c8_hs_bus>;
+			clocks = <&clock CLK_USI4>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_6: i2c@12CC0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CC0000 0x1000>;
-		interrupts = <0 62 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_USI2>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_9: i2c@12e10000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12e10000 0x1000>;
+			interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c9_hs_bus>;
+			clocks = <&clock CLK_USI5>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_7: i2c@12CD0000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12CD0000 0x1000>;
-		interrupts = <0 63 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_USI3>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hsi2c_10: i2c@12e20000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12e20000 0x1000>;
+			interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c10_hs_bus>;
+			clocks = <&clock CLK_USI6>;
+			clock-names = "hsi2c";
+			status = "disabled";
+		};
 
-	hsi2c_8: i2c@12E00000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E00000 0x1000>;
-		interrupts = <0 87 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_USI4>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hdmi: hdmi@14530000 {
+			compatible = "samsung,exynos5420-hdmi";
+			reg = <0x14530000 0x70000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
+				 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
+				 <&clock CLK_MOUT_HDMI>;
+			clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
+				"sclk_hdmiphy", "mout_hdmi";
+			phy = <&hdmiphy>;
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			status = "disabled";
+			power-domains = <&disp_pd>;
+			#sound-dai-cells = <0>;
+		};
 
-	hsi2c_9: i2c@12E10000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E10000 0x1000>;
-		interrupts = <0 88 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_USI5>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hdmiphy: hdmi-phy@145d0000 {
+			reg = <0x145d0000 0x20>;
+		};
 
-	hsi2c_10: i2c@12E20000 {
-		compatible = "samsung,exynos5-hsi2c";
-		reg = <0x12E20000 0x1000>;
-		interrupts = <0 203 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_USI6>;
-		clock-names = "hsi2c";
-		status = "disabled";
-	};
+		hdmicec: cec@101b0000 {
+			compatible = "samsung,s5p-cec";
+			reg = <0x101b0000 0x200>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_HDMI_CEC>;
+			clock-names = "hdmicec";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			hdmi-phandle = <&hdmi>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&hdmi_cec>;
+			status = "disabled";
+		};
 
-	hdmi: hdmi@14530000 {
-		compatible = "samsung,exynos5420-hdmi";
-		reg = <0x14530000 0x70000>;
-		interrupts = <0 95 0>;
-		clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
-			 <&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
-			 <&clock CLK_MOUT_HDMI>;
-		clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
-			"sclk_hdmiphy", "mout_hdmi";
-		phy = <&hdmiphy>;
-		samsung,syscon-phandle = <&pmu_system_controller>;
-		status = "disabled";
-		power-domains = <&disp_pd>;
-	};
+		mixer: mixer@14450000 {
+			compatible = "samsung,exynos5420-mixer";
+			reg = <0x14450000 0x10000>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
+				 <&clock CLK_SCLK_HDMI>;
+			clock-names = "mixer", "hdmi", "sclk_hdmi";
+			power-domains = <&disp_pd>;
+			iommus = <&sysmmu_tv>;
+			status = "disabled";
+		};
 
-	hdmiphy: hdmiphy@145D0000 {
-		reg = <0x145D0000 0x20>;
-	};
+		rotator: rotator@11c00000 {
+			compatible = "samsung,exynos5250-rotator";
+			reg = <0x11c00000 0x64>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_ROTATOR>;
+			clock-names = "rotator";
+			iommus = <&sysmmu_rotator>;
+		};
 
-	mixer: mixer@14450000 {
-		compatible = "samsung,exynos5420-mixer";
-		reg = <0x14450000 0x10000>;
-		interrupts = <0 94 0>;
-		clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
-			 <&clock CLK_SCLK_HDMI>;
-		clock-names = "mixer", "hdmi", "sclk_hdmi";
-		power-domains = <&disp_pd>;
-		iommus = <&sysmmu_tv>;
-	};
+		gsc_0: video-scaler@13e00000 {
+			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e00000 0x1000>;
+			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_GSCL0>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl0>;
+		};
 
-	gsc_0: video-scaler@13e00000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e00000 0x1000>;
-		interrupts = <0 85 0>;
-		clocks = <&clock CLK_GSCL0>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl0>;
-	};
+		gsc_1: video-scaler@13e10000 {
+			compatible = "samsung,exynos5420-gsc", "samsung,exynos5-gsc";
+			reg = <0x13e10000 0x1000>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_GSCL1>;
+			clock-names = "gscl";
+			power-domains = <&gsc_pd>;
+			iommus = <&sysmmu_gscl1>;
+		};
 
-	gsc_1: video-scaler@13e10000 {
-		compatible = "samsung,exynos5-gsc";
-		reg = <0x13e10000 0x1000>;
-		interrupts = <0 86 0>;
-		clocks = <&clock CLK_GSCL1>;
-		clock-names = "gscl";
-		power-domains = <&gsc_pd>;
-		iommus = <&sysmmu_gscl1>;
-	};
+		gpu: gpu@11800000 {
+			compatible = "samsung,exynos5420-mali", "arm,mali-t628";
+			reg = <0x11800000 0x5000>;
+			interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
 
-	jpeg_0: jpeg@11F50000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F50000 0x1000>;
-		interrupts = <0 89 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG>;
-		iommus = <&sysmmu_jpeg0>;
-	};
+			clocks = <&clock CLK_G3D>;
+			clock-names = "core";
+			power-domains = <&g3d_pd>;
+			operating-points-v2 = <&gpu_opp_table>;
 
-	jpeg_1: jpeg@11F60000 {
-		compatible = "samsung,exynos5420-jpeg";
-		reg = <0x11F60000 0x1000>;
-		interrupts = <0 168 0>;
-		clock-names = "jpeg";
-		clocks = <&clock CLK_JPEG2>;
-		iommus = <&sysmmu_jpeg1>;
-	};
+			status = "disabled";
+			#cooling-cells = <2>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-177000000 {
+					opp-hz = /bits/ 64 <177000000>;
+					opp-microvolt = <812500>;
+				};
+				opp-266000000 {
+					opp-hz = /bits/ 64 <266000000>;
+					opp-microvolt = <862500>;
+				};
+				opp-350000000 {
+					opp-hz = /bits/ 64 <350000000>;
+					opp-microvolt = <912500>;
+				};
+				opp-420000000 {
+					opp-hz = /bits/ 64 <420000000>;
+					opp-microvolt = <962500>;
+				};
+				opp-480000000 {
+					opp-hz = /bits/ 64 <480000000>;
+					opp-microvolt = <1000000>;
+				};
+				opp-543000000 {
+					opp-hz = /bits/ 64 <543000000>;
+					opp-microvolt = <1037500>;
+				};
+				opp-600000000 {
+					opp-hz = /bits/ 64 <600000000>;
+					opp-microvolt = <1150000>;
+				};
+			};
+		};
 
-	pmu_system_controller: system-controller@10040000 {
-		compatible = "samsung,exynos5420-pmu", "syscon";
-		reg = <0x10040000 0x5000>;
-		clock-names = "clkout16";
-		clocks = <&clock CLK_FIN_PLL>;
-		#clock-cells = <1>;
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		interrupt-parent = <&gic>;
-	};
+		scaler_0: scaler@12800000 {
+			compatible = "samsung,exynos5420-scaler";
+			reg = <0x12800000 0x1294>;
+			interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MSCL0>;
+			clock-names = "mscl";
+			power-domains = <&msc_pd>;
+			iommus = <&sysmmu_scaler0r>, <&sysmmu_scaler0w>;
+		};
 
-	sysreg_system_controller: syscon@10050000 {
-		compatible = "samsung,exynos5-sysreg", "syscon";
-		reg = <0x10050000 0x5000>;
-	};
+		scaler_1: scaler@12810000 {
+			compatible = "samsung,exynos5420-scaler";
+			reg = <0x12810000 0x1294>;
+			interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MSCL1>;
+			clock-names = "mscl";
+			power-domains = <&msc_pd>;
+			iommus = <&sysmmu_scaler1r>, <&sysmmu_scaler1w>;
+		};
 
-	tmu_cpu0: tmu@10060000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10060000 0x100>;
-		interrupts = <0 65 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		scaler_2: scaler@12820000 {
+			compatible = "samsung,exynos5420-scaler";
+			reg = <0x12820000 0x1294>;
+			interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_MSCL2>;
+			clock-names = "mscl";
+			power-domains = <&msc_pd>;
+			iommus = <&sysmmu_scaler2r>, <&sysmmu_scaler2w>;
+		};
 
-	tmu_cpu1: tmu@10064000 {
-		compatible = "samsung,exynos5420-tmu";
-		reg = <0x10064000 0x100>;
-		interrupts = <0 183 0>;
-		clocks = <&clock CLK_TMU>;
-		clock-names = "tmu_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		jpeg_0: jpeg@11f50000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11f50000 0x1000>;
+			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG>;
+			iommus = <&sysmmu_jpeg0>;
+		};
 
-	tmu_cpu2: tmu@10068000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x10068000 0x100>, <0x1006c000 0x4>;
-		interrupts = <0 184 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		jpeg_1: jpeg@11f60000 {
+			compatible = "samsung,exynos5420-jpeg";
+			reg = <0x11f60000 0x1000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "jpeg";
+			clocks = <&clock CLK_JPEG2>;
+			iommus = <&sysmmu_jpeg1>;
+		};
 
-	tmu_cpu3: tmu@1006c000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
-		interrupts = <0 185 0>;
-		clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+		pmu_system_controller: system-controller@10040000 {
+			compatible = "samsung,exynos5420-pmu", "simple-mfd", "syscon";
+			reg = <0x10040000 0x5000>;
+			clock-names = "clkout16";
+			clocks = <&clock CLK_FIN_PLL>;
+			#clock-cells = <1>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
 
-	tmu_gpu: tmu@100a0000 {
-		compatible = "samsung,exynos5420-tmu-ext-triminfo";
-		reg = <0x100a0000 0x100>, <0x10068000 0x4>;
-		interrupts = <0 215 0>;
-		clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
-		clock-names = "tmu_apbif", "tmu_triminfo_apbif";
-		#include "exynos4412-tmu-sensor-conf.dtsi"
-	};
+			dp_phy: dp-phy {
+				compatible = "samsung,exynos5420-dp-video-phy";
+				#phy-cells = <0>;
+			};
 
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmu_cpu0>;
-			#include "exynos5420-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmu_cpu1>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmu_cpu2>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-		cpu3_thermal: cpu3-thermal {
-		       thermal-sensors = <&tmu_cpu3>;
-		       #include "exynos5420-trip-points.dtsi"
+			mipi_phy: mipi-phy {
+				compatible = "samsung,exynos5420-mipi-video-phy";
+				#phy-cells = <1>;
+			};
 		};
-		gpu_thermal: gpu-thermal {
-		       thermal-sensors = <&tmu_gpu>;
-		       #include "exynos5420-trip-points.dtsi"
-		};
-	};
 
-        watchdog: watchdog@101D0000 {
-		compatible = "samsung,exynos5420-wdt";
-		reg = <0x101D0000 0x100>;
-		interrupts = <0 42 0>;
-		clocks = <&clock CLK_WDT>;
-		clock-names = "watchdog";
-		samsung,syscon-phandle = <&pmu_system_controller>;
-        };
-
-	sss: sss@10830000 {
-		compatible = "samsung,exynos4210-secss";
-		reg = <0x10830000 0x10000>;
-		interrupts = <0 112 0>;
-		clocks = <&clock CLK_SSS>;
-		clock-names = "secss";
-	};
-
-	usbdrd3_0: usb@12000000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD300>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_0: dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12000000 0x10000>;
-			interrupts = <0 72 0>;
-			phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		tmu_cpu0: tmu@10060000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
 		};
-	};
 
-	usbdrd_phy0: phy@12100000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12100000 0x100>;
-		clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
-
-	usbdrd3_1: usb@12400000 {
-		compatible = "samsung,exynos5250-dwusb3";
-		clocks = <&clock CLK_USBD301>;
-		clock-names = "usbdrd30";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		usbdrd_dwc3_1: dwc3 {
-			compatible = "snps,dwc3";
-			reg = <0x12400000 0x10000>;
-			interrupts = <0 73 0>;
-			phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
-			phy-names = "usb2-phy", "usb3-phy";
+		tmu_cpu1: tmu@10064000 {
+			compatible = "samsung,exynos5420-tmu";
+			reg = <0x10064000 0x100>;
+			interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>;
+			clock-names = "tmu_apbif";
+			#thermal-sensor-cells = <0>;
 		};
-	};
 
-	usbdrd_phy1: phy@12500000 {
-		compatible = "samsung,exynos5420-usbdrd-phy";
-		reg = <0x12500000 0x100>;
-		clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
-		clock-names = "phy", "ref";
-		samsung,pmu-syscon = <&pmu_system_controller>;
-		#phy-cells = <1>;
-	};
+		tmu_cpu2: tmu@10068000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x10068000 0x100>, <0x1006c000 0x4>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#thermal-sensor-cells = <0>;
+		};
 
-	usbhost2: usb@12110000 {
-		compatible = "samsung,exynos4210-ehci";
-		reg = <0x12110000 0x100>;
-		interrupts = <0 71 0>;
+		tmu_cpu3: tmu@1006c000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
+			interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#thermal-sensor-cells = <0>;
+		};
 
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+		tmu_gpu: tmu@100a0000 {
+			compatible = "samsung,exynos5420-tmu-ext-triminfo";
+			reg = <0x100a0000 0x100>, <0x10068000 0x4>;
+			interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
+			clock-names = "tmu_apbif", "tmu_triminfo_apbif";
+			#thermal-sensor-cells = <0>;
 		};
-	};
 
-	usbhost1: usb@12120000 {
-		compatible = "samsung,exynos4210-ohci";
-		reg = <0x12120000 0x100>;
-		interrupts = <0 71 0>;
+		sysmmu_g2dr: sysmmu@10a60000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10a60000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <24 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
+		};
 
-		clocks = <&clock CLK_USBH20>;
-		clock-names = "usbhost";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		port@0 {
-			reg = <0>;
-			phys = <&usb2_phy 1>;
+		sysmmu_g2dw: sysmmu@10a70000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x10a70000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
+			#iommu-cells = <0>;
 		};
-	};
 
-	usb2_phy: phy@12130000 {
-		compatible = "samsung,exynos5250-usb2-phy";
-		reg = <0x12130000 0x100>;
-		clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
-		clock-names = "phy", "ref";
-		#phy-cells = <1>;
-		samsung,sysreg-phandle = <&sysreg_system_controller>;
-		samsung,pmureg-phandle = <&pmu_system_controller>;
-	};
+		sysmmu_tv: sysmmu@14650000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14650000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <7 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_g2dr: sysmmu@0x10A60000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A60000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <24 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gscl0: sysmmu@13e80000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13e80000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_g2dw: sysmmu@0x10A70000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x10A70000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_gscl1: sysmmu@13e90000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x13e90000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <2 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
+			power-domains = <&gsc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_tv: sysmmu@0x14650000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14650000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <7 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler0r: sysmmu@12880000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12880000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 4>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gscl0: sysmmu@0x13E80000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E80000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler1r: sysmmu@12890000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x12890000 0x1000>;
+			interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_gscl1: sysmmu@0x13E90000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x13E90000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <2 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
-		power-domains = <&gsc_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler2r: sysmmu@128a0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128a0000 0x1000>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler0r: sysmmu@0x12880000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12880000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 4>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler0w: sysmmu@128c0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128c0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <27 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler1r: sysmmu@0x12890000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x12890000 0x1000>;
-		interrupts = <0 186 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler1w: sysmmu@128d0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128d0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <22 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler2r: sysmmu@0x128A0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128A0000 0x1000>;
-		interrupts = <0 188 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_scaler2w: sysmmu@128e0000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x128e0000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <19 6>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
+			power-domains = <&msc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler0w: sysmmu@0x128C0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128C0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <27 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_rotator: sysmmu@11d40000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11d40000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler1w: sysmmu@0x128D0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128D0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <22 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg0: sysmmu@11f10000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11f10000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <4 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_scaler2w: sysmmu@0x128E0000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x128E0000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <19 6>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_jpeg1: sysmmu@11f20000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11f20000 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg0: sysmmu@0x11F10000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F10000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <4 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_l: sysmmu@11200000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11200000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <6 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_jpeg1: sysmmu@0x11F20000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11F20000 0x1000>;
-		interrupts = <0 169 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_mfc_r: sysmmu@11210000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x11210000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <8 5>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
+			power-domains = <&mfc_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_l: sysmmu@0x11200000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11200000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <6 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
-	};
+		sysmmu_fimd1_0: sysmmu@14640000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14640000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 2>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 
-	sysmmu_mfc_r: sysmmu@0x11210000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x11210000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <8 5>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
-		power-domains = <&mfc_pd>;
-		#iommu-cells = <0>;
+		sysmmu_fimd1_1: sysmmu@14680000 {
+			compatible = "samsung,exynos-sysmmu";
+			reg = <0x14680000 0x1000>;
+			interrupt-parent = <&combiner>;
+			interrupts = <3 0>;
+			clock-names = "sysmmu", "master";
+			clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
+			power-domains = <&disp_pd>;
+			#iommu-cells = <0>;
+		};
 	};
 
-	sysmmu_fimd1_0: sysmmu@0x14640000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14640000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 2>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			#include "exynos5420-trip-points.dtsi"
+		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu>;
+			#include "exynos5420-trip-points.dtsi"
+		};
 	};
+};
 
-	sysmmu_fimd1_1: sysmmu@0x14680000 {
-		compatible = "samsung,exynos-sysmmu";
-		reg = <0x14680000 0x1000>;
-		interrupt-parent = <&combiner>;
-		interrupts = <3 0>;
-		clock-names = "sysmmu", "master";
-		clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
-		power-domains = <&disp_pd>;
-		#iommu-cells = <0>;
-	};
+&adc {
+	clocks = <&clock CLK_TSADC>;
+	clock-names = "adc";
+	samsung,syscon-phandle = <&pmu_system_controller>;
 };
 
 &dp {
@@ -1133,6 +1213,7 @@
 };
 
 &fimd {
+	compatible = "samsung,exynos5420-fimd";
 	clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
 	clock-names = "sclk_fimd", "fimd";
 	power-domains = <&disp_pd>;
@@ -1140,6 +1221,84 @@
 	iommu-names = "m0", "m1";
 };
 
+&g2d {
+	iommus = <&sysmmu_g2dr>, <&sysmmu_g2dw>;
+	clocks = <&clock CLK_G2D>;
+	clock-names = "fimg2d";
+	status = "okay";
+};
+
+&i2c_0 {
+	clocks = <&clock CLK_I2C0>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_bus>;
+};
+
+&i2c_1 {
+	clocks = <&clock CLK_I2C1>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_bus>;
+};
+
+&i2c_2 {
+	clocks = <&clock CLK_I2C2>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_bus>;
+};
+
+&i2c_3 {
+	clocks = <&clock CLK_I2C3>;
+	clock-names = "i2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_bus>;
+};
+
+&hsi2c_4 {
+	clocks = <&clock CLK_USI0>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_hs_bus>;
+};
+
+&hsi2c_5 {
+	clocks = <&clock CLK_USI1>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_hs_bus>;
+};
+
+&hsi2c_6 {
+	clocks = <&clock CLK_USI2>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_hs_bus>;
+};
+
+&hsi2c_7 {
+	clocks = <&clock CLK_USI3>;
+	clock-names = "hsi2c";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c7_hs_bus>;
+};
+
+&mct {
+	clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
+	clock-names = "fin_pll", "mct";
+};
+
+&prng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&pwm {
+	clocks = <&clock CLK_PWM>;
+	clock-names = "timers";
+};
+
 &rtc {
 	clocks = <&clock CLK_RTC>;
 	clock-names = "rtc";
@@ -1150,19 +1309,89 @@
 &serial_0 {
 	clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 13>, <&pdma0 14>;
+	dma-names = "rx", "tx";
 };
 
 &serial_1 {
 	clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 15>, <&pdma1 16>;
+	dma-names = "rx", "tx";
 };
 
 &serial_2 {
 	clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma0 15>, <&pdma0 16>;
+	dma-names = "rx", "tx";
 };
 
 &serial_3 {
 	clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
 	clock-names = "uart", "clk_uart_baud0";
+	dmas = <&pdma1 17>, <&pdma1 18>;
+	dma-names = "rx", "tx";
+};
+
+&sss {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
 };
+
+&trng {
+	clocks = <&clock CLK_SSS>;
+	clock-names = "secss";
+};
+
+&usbdrd3_0 {
+	clocks = <&clock CLK_USBD300>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_phy0 {
+	clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbdrd3_1 {
+	clocks = <&clock CLK_USBD301>;
+	clock-names = "usbdrd30";
+};
+
+&usbdrd_dwc3_1 {
+	interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdrd_phy1 {
+	clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
+	clock-names = "phy", "ref";
+	samsung,pmu-syscon = <&pmu_system_controller>;
+};
+
+&usbhost1 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usbhost2 {
+	clocks = <&clock CLK_USBH20>;
+	clock-names = "usbhost";
+};
+
+&usb2_phy {
+	clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
+	clock-names = "phy", "ref";
+	samsung,sysreg-phandle = <&sysreg_system_controller>;
+	samsung,pmureg-phandle = <&pmu_system_controller>;
+};
+
+&watchdog {
+	clocks = <&clock CLK_WDT>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+};
+
+#include "exynos5420-pinctrl.dtsi"
+#include "exynos-syscon-restart.dtsi"
diff --git a/arch/arm/boot/dts/exynos5422-cpus.dtsi b/arch/arm/boot/dts/exynos5422-cpus.dtsi
new file mode 100644
index 000000000000..412a0bb4b988
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-cpus.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Exynos5422 SoC cpu device tree source
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This file provides desired ordering for Exynos5422: CPU[0123] being the A7.
+ *
+ * The Exynos5420, 5422 and 5800 actually share the same CPU configuration
+ * but particular boards choose different booting order.
+ *
+ * Exynos5420 and Exynos5800 always boot from Cortex-A15. On Exynos5422
+ * booting cluster (big or LITTLE) is chosen by IROM code by reading
+ * the gpg2-1 GPIO. By default all Exynos5422 based boards choose booting
+ * from the LITTLE: Cortex-A7.
+ */
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu1: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu2: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu3: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clocks = <&clock CLK_KFC_CLK>;
+			clock-frequency = <1000000000>;
+			cci-control-port = <&cci_control0>;
+			operating-points-v2 = <&cluster_a7_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <539>;
+			dynamic-power-coefficient = <90>;
+		};
+
+		cpu4: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x0>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+
+		cpu5: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x1>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+
+		cpu6: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x2>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+
+		cpu7: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0x3>;
+			clocks = <&clock CLK_ARM_CLK>;
+			clock-frequency = <1800000000>;
+			cci-control-port = <&cci_control1>;
+			operating-points-v2 = <&cluster_a15_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
+			capacity-dmips-mhz = <1024>;
+			dynamic-power-coefficient = <310>;
+		};
+	};
+};
+
+&arm_a7_pmu {
+	interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	status = "okay";
+};
+
+&arm_a15_pmu {
+	interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
new file mode 100644
index 000000000000..2f5b8602e020
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
@@ -0,0 +1,1072 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU3/XU3-Lite/XU4/HC1 boards core device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x7ea00000>;
+	};
+
+	aliases {
+		mmc2 = &mmc_2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	bus_wcore_opp_table: opp-table-2 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+			opp-microvolt = <925000 925000 1400000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <177400000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+			opp-microvolt = <950000 950000 1400000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <532000000>;
+			opp-microvolt = <1000000 1000000 1400000>;
+		};
+	};
+
+	bus_noc_opp_table: opp-table-3 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <74000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+	};
+
+	bus_fsys_apb_opp_table: opp-table-4 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+	};
+
+	bus_fsys2_opp_table: opp-table-5 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_mfc_opp_table: opp-table-6 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_gen_opp_table: opp-table-7 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <88700000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_peri_opp_table: opp-table-8 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66600000>;
+		};
+	};
+
+	bus_g2d_opp_table: opp-table-9 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+	};
+
+	bus_g2d_acp_opp_table: opp-table-10 {
+		compatible = "operating-points-v2";
+
+		/* derived from 532MHz MPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <66500000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <178000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <266000000>;
+		};
+	};
+
+	bus_jpeg_opp_table: opp-table-11 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <75000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_jpeg_apb_opp_table: opp-table-12 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <83250000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <111000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <133000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <166500000>;
+		};
+	};
+
+	bus_disp1_fimd_opp_table: opp-table-13 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+	};
+
+	bus_disp1_opp_table: opp-table-14 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_gscl_opp_table: opp-table-15 {
+		compatible = "operating-points-v2";
+
+		/* derived from 600MHz DPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <150000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <200000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <300000000>;
+		};
+	};
+
+	bus_mscl_opp_table: opp-table-16 {
+		compatible = "operating-points-v2";
+
+		/* derived from 666MHz CPLL */
+		opp00 {
+			opp-hz = /bits/ 64 <84000000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <167000000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <222000000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <333000000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <666000000>;
+		};
+	};
+
+	dmc_opp_table: opp-table-17 {
+		compatible = "operating-points-v2";
+
+		opp00 {
+			opp-hz = /bits/ 64 <165000000>;
+			opp-microvolt = <875000>;
+		};
+		opp01 {
+			opp-hz = /bits/ 64 <206000000>;
+			opp-microvolt = <875000>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <275000000>;
+			opp-microvolt = <875000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <413000000>;
+			opp-microvolt = <887500>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <543000000>;
+			opp-microvolt = <937500>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <633000000>;
+			opp-microvolt = <1012500>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <728000000>;
+			opp-microvolt = <1037500>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <825000000>;
+			opp-microvolt = <1050000>;
+		};
+	};
+
+	samsung_K3QF2F20DB: lpddr3 {
+		compatible	= "samsung,K3QF2F20DB", "jedec,lpddr3";
+		density		= <16384>;
+		io-width	= <32>;
+
+		tRFC-min-tck		= <17>;
+		tRRD-min-tck		= <2>;
+		tRPab-min-tck		= <2>;
+		tRPpb-min-tck		= <2>;
+		tRCD-min-tck		= <3>;
+		tRC-min-tck		= <6>;
+		tRAS-min-tck		= <5>;
+		tWTR-min-tck		= <2>;
+		tWR-min-tck		= <7>;
+		tRTP-min-tck		= <2>;
+		tW2W-C2C-min-tck	= <0>;
+		tR2R-C2C-min-tck	= <0>;
+		tWL-min-tck		= <8>;
+		tDQSCK-min-tck		= <5>;
+		tRL-min-tck		= <14>;
+		tFAW-min-tck		= <5>;
+		tXSR-min-tck		= <12>;
+		tXP-min-tck		= <2>;
+		tCKE-min-tck		= <2>;
+		tCKESR-min-tck		= <2>;
+		tMRD-min-tck		= <5>;
+
+		timings_samsung_K3QF2F20DB_800mhz: timings {
+			compatible	= "jedec,lpddr3-timings";
+			max-freq	= <800000000>;
+			min-freq	= <100000000>;
+			tRFC		= <65000>;
+			tRRD		= <6000>;
+			tRPab		= <12000>;
+			tRPpb		= <12000>;
+			tRCD		= <10000>;
+			tRC		= <33750>;
+			tRAS		= <23000>;
+			tWTR		= <3750>;
+			tWR		= <7500>;
+			tRTP		= <3750>;
+			tW2W-C2C	= <0>;
+			tR2R-C2C	= <0>;
+			tFAW		= <25000>;
+			tXSR		= <70000>;
+			tXP		= <3750>;
+			tCKE		= <3750>;
+			tCKESR		= <3750>;
+			tMRD		= <7000>;
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+	status = "okay";
+};
+
+&bus_wcore {
+	operating-points-v2 = <&bus_wcore_opp_table>;
+	devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
+			<&nocp_mem1_0>, <&nocp_mem1_1>;
+	vdd-supply = <&buck3_reg>;
+	exynos,saturation-ratio = <100>;
+	status = "okay";
+};
+
+&bus_noc {
+	operating-points-v2 = <&bus_noc_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys_apb {
+	operating-points-v2 = <&bus_fsys_apb_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_fsys2 {
+	operating-points-v2 = <&bus_fsys2_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mfc {
+	operating-points-v2 = <&bus_mfc_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gen {
+	operating-points-v2 = <&bus_gen_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_peri {
+	operating-points-v2 = <&bus_peri_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d {
+	operating-points-v2 = <&bus_g2d_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_g2d_acp {
+	operating-points-v2 = <&bus_g2d_acp_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg {
+	operating-points-v2 = <&bus_jpeg_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_jpeg_apb {
+	operating-points-v2 = <&bus_jpeg_apb_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1_fimd {
+	operating-points-v2 = <&bus_disp1_fimd_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_disp1 {
+	operating-points-v2 = <&bus_disp1_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_gscl_scaler {
+	operating-points-v2 = <&bus_gscl_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&bus_mscl {
+	operating-points-v2 = <&bus_mscl_opp_table>;
+	devfreq = <&bus_wcore>;
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&dmc {
+	devfreq-events = <&ppmu_event3_dmc0_0>,	<&ppmu_event3_dmc0_1>,
+			<&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+	device-handle = <&samsung_K3QF2F20DB>;
+	operating-points-v2 = <&dmc_opp_table>;
+	vdd-supply = <&buck1_reg>;
+	status = "okay";
+};
+
+&hsi2c_4 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+		samsung,s2mps11-acokb-ground;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+		wakeup-source;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					"s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			ldo1_reg: LDO1 {
+				regulator-name = "vdd_ldo1";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "vdd_ldo2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "vddq_mmc0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "vdd_adc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "vdd_ldo5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "vdd_ldo6";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "vdd_ldo7";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "vdd_ldo8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "vdd_ldo9";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "vdd_ldo10";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "vdd_ldo11";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				/* Unused */
+				regulator-name = "vdd_ldo12";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "vddq_mmc2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				/* Unused */
+				regulator-name = "vdd_ldo14";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "vdd_ldo15";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				/* Unused */
+				regulator-name = "vdd_ldo16";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo17_reg: LDO17 {
+				regulator-name = "vdd_ldo17";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "vdd_emmc_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				/* Unused */
+				regulator-name = "vdd_ldo20";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo21_reg: LDO21 {
+				/* Unused */
+				regulator-name = "vdd_ldo21";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo22_reg: LDO22 {
+				/* Unused */
+				regulator-name = "vdd_ldo22";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "vdd_mifs";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				/* Unused */
+				regulator-name = "vdd_ldo24";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo25_reg: LDO25 {
+				/* Unused */
+				regulator-name = "vdd_ldo25";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo26_reg: LDO26 {
+				/* Used on XU3, XU3-Lite and XU4 */
+				regulator-name = "vdd_ldo26";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "vdd_g3ds";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				/* Used on XU3 */
+				regulator-name = "vdd_ldo28";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo29_reg: LDO29 {
+				/* Unused */
+				regulator-name = "vdd_ldo29";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo30_reg: LDO30 {
+				/* Unused */
+				regulator-name = "vdd_ldo30";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo31_reg: LDO31 {
+				/* Unused */
+				regulator-name = "vdd_ldo31";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo32_reg: LDO32 {
+				/* Unused */
+				regulator-name = "vdd_ldo32";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo33_reg: LDO33 {
+				/* Unused */
+				regulator-name = "vdd_ldo33";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo34_reg: LDO34 {
+				/* Unused */
+				regulator-name = "vdd_ldo34";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo35_reg: LDO35 {
+				/* Unused */
+				regulator-name = "vdd_ldo35";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <2375000>;
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "vdd_ldo36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "vdd_ldo37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				/* Unused */
+				regulator-name = "vdd_ldo38";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			buck1_reg: BUCK1 {
+				regulator-name = "vdd_mif";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "vdd_int";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "vdd_g3d";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-boot-on;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "vdd_mem";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "vdd_kfc";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "vdd_1.35v_ldo";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "vdd_2.0v_ldo";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "vdd_2.8v_ldo";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3750000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "vdd_vmem";
+				regulator-min-microvolt = <2850000>;
+				regulator-max-microvolt = <2850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&mmc_2 {
+	status = "okay";
+	card-detect-delay = <200>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_wp &sd2_bus1 &sd2_bus4>;
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	vmmc-supply = <&ldo19_reg>;
+	vqmmc-supply = <&ldo13_reg>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sd-uhs-ddr50;
+};
+
+&nocp_mem0_0 {
+	status = "okay";
+};
+
+&nocp_mem0_1 {
+	status = "okay";
+};
+
+&nocp_mem1_0 {
+	status = "okay";
+};
+
+&nocp_mem1_1 {
+	status = "okay";
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+};
+
+&ppmu_dmc0_0 {
+	status = "okay";
+};
+
+&ppmu_dmc0_1 {
+	status = "okay";
+};
+
+&ppmu_dmc1_0 {
+	status = "okay";
+};
+
+&ppmu_dmc1_1 {
+	status = "okay";
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo7_reg>;
+};
+
+&gpu {
+	mali-supply = <&buck4_reg>;
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "host";
+};
+
+/* usbdrd_dwc3_1 mode customized in each board */
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidhc1.dts b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
new file mode 100644
index 000000000000..5e4280393706
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidhc1.dts
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid HC1 board device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include "exynos5422-odroid-core.dtsi"
+
+/ {
+	model = "Hardkernel Odroid HC1";
+	compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			trips {
+				cpu0_alert0: cpu-alert-0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_alert1: cpu-alert-1 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				/*
+				 * When reaching cpu0_alert0, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * be: 1600 MHz and 1100 MHz.
+				 */
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				/*
+				 * When reaching cpu0_alert1, reduce CPU
+				 * further, down to 600 MHz (12 steps for big,
+				 * 7 steps for LITTLE).
+				 */
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			trips {
+				cpu1_alert0: cpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu1_alert1: cpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu1_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			trips {
+				cpu2_alert0: cpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu2_alert1: cpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu2_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			trips {
+				cpu3_alert0: cpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu3_alert1: cpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				cpu3_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
+		};
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
+		};
+	};
+
+};
+
+&pwm {
+	/*
+	 * PWM 2 -- Blue LED
+	 */
+	pinctrl-0 = <&pwm2_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <2>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
new file mode 100644
index 000000000000..86b96f9706db
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU3 audio subsystem device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/sound/samsung-i2s.h>
+
+/ {
+	sound: sound {
+		compatible = "samsung,odroid-xu3-audio";
+		model = "Odroid-XU3";
+
+		samsung,audio-widgets =
+			"Headphone", "Headphone Jack",
+			"Speakers", "Speakers";
+		samsung,audio-routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Headphone Jack", "MICBIAS",
+			"IN12", "Headphone Jack",
+			"Speakers", "SPKL",
+			"Speakers", "SPKR",
+			"I2S Playback", "Mixer DAI TX",
+			"HiFi Playback", "Mixer DAI TX",
+			"Mixer DAI RX", "HiFi Capture";
+
+		cpu {
+			sound-dai = <&i2s0 0>, <&i2s0 1>;
+		};
+		codec {
+			sound-dai = <&hdmi>, <&max98090>;
+		};
+	};
+};
+
+&hsi2c_5 {
+	status = "okay";
+	max98090: audio-codec@10 {
+		compatible = "maxim,max98090";
+		reg = <0x10>;
+		interrupt-parent = <&gpx3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		clocks = <&i2s0 CLK_I2S_CDCLK>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2s0 {
+	status = "okay";
+	assigned-clocks = <&clock CLK_MOUT_EPLL>,
+			<&clock CLK_MOUT_MAU_EPLL>,
+			<&clock CLK_MOUT_USER_MAU_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_MOUT_I2S>,
+			<&i2s0 CLK_I2S_RCLK_SRC>,
+			<&clock_audss EXYNOS_DOUT_SRP>,
+			<&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			<&clock_audss EXYNOS_DOUT_I2S>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+			<&clock CLK_MOUT_EPLL>,
+			<&clock CLK_MOUT_MAU_EPLL>,
+			<&clock CLK_MAU_EPLL>,
+			<&clock_audss EXYNOS_MOUT_AUDSS>,
+			<&clock_audss EXYNOS_SCLK_I2S>;
+
+	assigned-clock-rates = <0>,
+			<0>,
+			<0>,
+			<0>,
+			<0>,
+			<0>,
+			<196608001>,
+			<(196608002 / 2)>,
+			<196608000>;
+
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 8adf455744e9..b4a851aa8881 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -1,39 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Hardkernel Odroid XU3 board device tree source
+ * Hardkernel Odroid XU3/XU3-Lite/XU4 boards common device tree source
  *
- * Copyright (c) 2014 Collabora Ltd.
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ *                    Anand Moon <linux.amoon@gmail.com>
+ */
 
-#include <dt-bindings/clock/samsung,s2mps11.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/sound/samsung-i2s.h>
-#include "exynos5800.dtsi"
+#include <dt-bindings/input/input.h>
+#include "exynos5422-odroid-core.dtsi"
 
 / {
-	memory {
-		reg = <0x40000000 0x7EA00000>;
-	};
-
-	chosen {
-		linux,stdout-path = &serial_2;
+	aliases {
+		mmc0 = &mmc_0;
 	};
 
-	firmware@02073000 {
-		compatible = "samsung,secure-firmware";
-		reg = <0x02073000 0x1000>;
-	};
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&power_key>;
 
-	fixed-rate-clocks {
-		oscclk {
-			compatible = "samsung,exynos5420-oscclk";
-			clock-frequency = <24000000>;
+		power-key {
+			/*
+			 * The power button (SW2) is connected to the PWRON
+			 * pin (active high) of the S2MPS11 PMIC, which acts
+			 * as a 16ms debouce filter and signal inverter with
+			 * output on ONOB pin (active low). ONOB PMIC pin is
+			 * then connected to XEINT3 SoC pin.
+			 */
+			gpios = <&gpx0 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power key";
+			debounce-interval = <0>;
+			wakeup-source;
 		};
 	};
 
@@ -41,93 +42,397 @@
 		pinctrl-0 = <&emmc_nrst_pin>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
-		reset-gpios = <&gpd1 0 1>;
+		reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>;
 	};
 
-	pwmleds {
-		compatible = "pwm-leds";
+	fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 20972 0>;
+		#cooling-cells = <2>;
+		cooling-levels = <0 130 170 230>;
+	};
 
-		greenled {
-			label = "green:mmc0";
-			pwms = <&pwm 1 2000000 0>;
-			pwm-names = "pwm1";
-			/*
-			 * Green LED is much brighter than the others
-			 * so limit its max brightness
-			 */
-			max_brightness = <127>;
-			linux,default-trigger = "mmc0";
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu0_alert0: cpu-alert-0 {
+					temperature = <50000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_alert1: cpu-alert-1 {
+					temperature = <60000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_alert2: cpu-alert-2 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu0_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+				/*
+				 * Exynos542x supports only 4 trip-points
+				 * so for these polling mode is required.
+				 * Start polling at temperature level of last
+				 * interrupt-driven trip: cpu0_alert2
+				 */
+				cpu0_alert3: cpu-alert-3 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu0_alert4: cpu-alert-4 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu0_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu0_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu0_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				/*
+				 * When reaching cpu0_alert3, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * (usually) be: 1800 MHz and 1200 MHz.
+				 */
+				map3 {
+					trip = <&cpu0_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				/*
+				 * When reaching cpu0_alert4, reduce CPU
+				 * further, down to 600 MHz (14 steps for big,
+				 * 8 steps for LITTLE).
+				 */
+				cpu0_cooling_map4: map4 {
+					trip = <&cpu0_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
 		};
-
-		blueled {
-			label = "blue:heartbeat";
-			pwms = <&pwm 2 2000000 0>;
-			pwm-names = "pwm2";
-			max_brightness = <255>;
-			linux,default-trigger = "heartbeat";
+		cpu1_thermal: cpu1-thermal {
+			thermal-sensors = <&tmu_cpu1>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu1_alert0: cpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu1_alert1: cpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu1_alert2: cpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu1_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu1_alert3: cpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				cpu1_alert4: cpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu1_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu1_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu1_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&cpu1_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				cpu1_cooling_map4: map4 {
+					trip = <&cpu1_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
 		};
-	};
-
-	gpioleds {
-		compatible = "gpio-leds";
-		redled {
-			label = "red:microSD";
-			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "mmc1";
+		cpu2_thermal: cpu2-thermal {
+			thermal-sensors = <&tmu_cpu2>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu2_alert0: cpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu2_alert1: cpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu2_alert2: cpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu2_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu2_alert3: cpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				cpu2_alert4: cpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu2_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu2_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu2_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&cpu2_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				cpu2_cooling_map4: map4 {
+					trip = <&cpu2_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
 		};
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-
-		simple-audio-card,name = "Odroid-XU3";
-		simple-audio-card,widgets =
-			"Headphone", "Headphone Jack",
-			"Speakers", "Speakers";
-		simple-audio-card,routing =
-			"Headphone Jack", "HPL",
-			"Headphone Jack", "HPR",
-			"Headphone Jack", "MICBIAS",
-			"IN1", "Headphone Jack",
-			"Speakers", "SPKL",
-			"Speakers", "SPKR";
-
-		simple-audio-card,format = "i2s";
-		simple-audio-card,bitclock-master = <&link0_codec>;
-		simple-audio-card,frame-master = <&link0_codec>;
-
-		simple-audio-card,cpu {
-			sound-dai = <&i2s0 0>;
-			system-clock-frequency = <19200000>;
+		cpu3_thermal: cpu3-thermal {
+			thermal-sensors = <&tmu_cpu3>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu3_alert0: cpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu3_alert1: cpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu3_alert2: cpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				cpu3_crit0: cpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				cpu3_alert3: cpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				cpu3_alert4: cpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu3_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu3_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu3_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&cpu3_alert3>;
+					cooling-device = <&cpu0 0 2>,
+							 <&cpu1 0 2>,
+							 <&cpu2 0 2>,
+							 <&cpu3 0 2>,
+							 <&cpu4 0 2>,
+							 <&cpu5 0 2>,
+							 <&cpu6 0 2>,
+							 <&cpu7 0 2>;
+				};
+				cpu3_cooling_map4: map4 {
+					trip = <&cpu3_alert4>;
+					cooling-device = <&cpu0 3 8>,
+							 <&cpu1 3 8>,
+							 <&cpu2 3 8>,
+							 <&cpu3 3 8>,
+							 <&cpu4 3 14>,
+							 <&cpu5 3 14>,
+							 <&cpu6 3 14>,
+							 <&cpu7 3 14>;
+				};
+			};
 		};
-
-		link0_codec: simple-audio-card,codec {
-			sound-dai = <&max98090>;
-			clocks = <&i2s0 CLK_I2S_CDCLK>;
+		gpu_thermal: gpu-thermal {
+			thermal-sensors = <&tmu_gpu>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				gpu_alert0: gpu-alert-0 {
+					temperature = <50000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert1: gpu-alert-1 {
+					temperature = <60000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_alert2: gpu-alert-2 {
+					temperature = <70000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+				gpu_crit0: gpu-crit-0 {
+					temperature = <120000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+				gpu_alert3: gpu-alert-3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+				gpu_alert4: gpu-alert-4 {
+					temperature = <85000>;
+					hysteresis = <10000>;
+					type = "passive";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&gpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&gpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				map3 {
+					trip = <&gpu_alert3>;
+					cooling-device = <&gpu 0 2>;
+				};
+				map4 {
+					trip = <&gpu_alert4>;
+					cooling-device = <&gpu 3 6>;
+				};
+			};
 		};
 	};
 };
 
-&clock_audss {
-	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
-			<&clock_audss EXYNOS_MOUT_I2S>,
-			<&clock_audss EXYNOS_DOUT_AUD_BUS>;
-	assigned-clock-parents = <&clock CLK_FIN_PLL>,
-			<&clock_audss EXYNOS_MOUT_AUDSS>;
-	assigned-clock-rates = <0>,
-			<0>,
-			<19200000>;
+&buck10_reg {
+	/* Supplies vmmc-supply of mmc_0 */
+	regulator-always-on;
+	regulator-boot-on;
 };
 
-&fimd {
-	status = "okay";
-};
-
-
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 0>;
+	ddc = <&i2c_2>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 
@@ -136,271 +441,31 @@
 	vdd-supply = <&ldo6_reg>;
 };
 
-&hsi2c_4 {
+&hdmicec {
 	status = "okay";
-
-	s2mps11_pmic@66 {
-		compatible = "samsung,s2mps11-pmic";
-		reg = <0x66>;
-		s2mps11,buck2-ramp-delay = <12>;
-		s2mps11,buck34-ramp-delay = <12>;
-		s2mps11,buck16-ramp-delay = <12>;
-		s2mps11,buck6-ramp-enable = <1>;
-		s2mps11,buck2-ramp-enable = <1>;
-		s2mps11,buck3-ramp-enable = <1>;
-		s2mps11,buck4-ramp-enable = <1>;
-
-		interrupt-parent = <&gpx0>;
-		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&s2mps11_irq>;
-
-		s2mps11_osc: clocks {
-			#clock-cells = <1>;
-			clock-output-names = "s2mps11_ap",
-					"s2mps11_cp", "s2mps11_bt";
-		};
-
-		regulators {
-			ldo1_reg: LDO1 {
-				regulator-name = "vdd_ldo1";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo3_reg: LDO3 {
-				regulator-name = "vdd_ldo3";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo5_reg: LDO5 {
-				regulator-name = "vdd_ldo5";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo6_reg: LDO6 {
-				regulator-name = "vdd_ldo6";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo7_reg: LDO7 {
-				regulator-name = "vdd_ldo7";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo8_reg: LDO8 {
-				regulator-name = "vdd_ldo8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo9_reg: LDO9 {
-				regulator-name = "vdd_ldo9";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			ldo10_reg: LDO10 {
-				regulator-name = "vdd_ldo10";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo11_reg: LDO11 {
-				regulator-name = "vdd_ldo11";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-			};
-
-			ldo12_reg: LDO12 {
-				regulator-name = "vdd_ldo12";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-
-			ldo13_reg: LDO13 {
-				regulator-name = "vdd_ldo13";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo15_reg: LDO15 {
-				regulator-name = "vdd_ldo15";
-				regulator-min-microvolt = <3100000>;
-				regulator-max-microvolt = <3100000>;
-				regulator-always-on;
-			};
-
-			ldo16_reg: LDO16 {
-				regulator-name = "vdd_ldo16";
-				regulator-min-microvolt = <2200000>;
-				regulator-max-microvolt = <2200000>;
-				regulator-always-on;
-			};
-
-			ldo17_reg: LDO17 {
-				regulator-name = "tsp_avdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			ldo19_reg: LDO19 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo24_reg: LDO24 {
-				regulator-name = "tsp_io";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				regulator-always-on;
-			};
-
-			ldo26_reg: LDO26 {
-				regulator-name = "vdd_ldo26";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck5_reg: BUCK5 {
-				regulator-name = "vdd_mem";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1400000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck6_reg: BUCK6 {
-				regulator-name = "vdd_kfc";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck7_reg: BUCK7 {
-				regulator-name = "vdd_1.0v_ldo";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck8_reg: BUCK8 {
-				regulator-name = "vdd_1.8v_ldo";
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1500000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck9_reg: BUCK9 {
-				regulator-name = "vdd_2.8v_ldo";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3750000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-
-			buck10_reg: BUCK10 {
-				regulator-name = "vdd_vmem";
-				regulator-min-microvolt = <2850000>;
-				regulator-max-microvolt = <2850000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};
-};
-
-&hsi2c_5 {
-	status = "okay";
-	max98090: max98090@10 {
-		compatible = "maxim,max98090";
-		reg = <0x10>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <2 0>;
-		clocks = <&i2s0 CLK_I2S_CDCLK>;
-		clock-names = "mclk";
-		#sound-dai-cells = <0>;
-	};
+	needs-hpd;
 };
 
 &i2c_2 {
 	samsung,i2c-sda-delay = <100>;
 	samsung,i2c-max-bus-freq = <66000>;
+	/* used by HDMI DDC */
 	status = "okay";
-
-	hdmiddc@50 {
-		compatible = "samsung,exynos4210-hdmiddc";
-		reg = <0x50>;
-	};
 };
 
-&i2s0 {
-	status = "okay";
+&ldo26_reg {
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-always-on;
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
+&mixer {
+	status = "okay";
 };
 
 &mmc_0 {
 	status = "okay";
 	mmc-pwrseq = <&emmc_pwrseq>;
-	cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
 	card-detect-delay = <200>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -411,69 +476,35 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_cd &sd0_rclk>;
 	bus-width = <8>;
 	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
-};
-
-&mmc_2 {
-	status = "okay";
-	card-detect-delay = <200>;
-	samsung,dw-mshc-ciu-div = <3>;
-	samsung,dw-mshc-sdr-timing = <0 4>;
-	samsung,dw-mshc-ddr-timing = <0 2>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
-	bus-width = <4>;
-	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	vmmc-supply = <&ldo18_reg>;
+	vqmmc-supply = <&ldo3_reg>;
 };
 
 &pinctrl_0 {
-	hdmi_hpd_irq: hdmi-hpd-irq {
-		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+	power_key: power-key-pins {
+		samsung,pins = "gpx0-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	s2mps11_irq: s2mps11-irq {
-		samsung,pins = "gpx0-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
+		samsung,pins = "gpx3-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
 &pinctrl_1 {
-	emmc_nrst_pin: emmc-nrst {
+	emmc_nrst_pin: emmc-nrst-pins {
 		samsung,pins = "gpd1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
-
-&pwm {
-	/*
-	 * PWM 0 -- fan
-	 * PWM 1 -- Green LED
-	 * PWM 2 -- Blue LED
-	 * PWM 3 -- on MIPI connector for backlight
-	 */
-	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
-	clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_0 {
-	dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
-	dr_mode = "otg";
-};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
index c06882bbb822..e3154a1cae23 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Hardkernel Odroid XU3-Lite board device tree source
  *
@@ -5,16 +6,122 @@
  * Copyright (c) 2014 Collabora Ltd.
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3 Lite";
 	compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5";
+
+	aliases {
+		ethernet = &ethernet;
+	};
+};
+
+&arm_a7_pmu {
+	status = "disabled";
+};
+
+&arm_a15_pmu {
+	status = "disabled";
+};
+
+&chipid {
+	samsung,asv-bin = <2>;
+};
+
+/*
+ * Odroid XU3-Lite board uses SoC revision with lower maximum frequencies
+ * than Odroid XU3/XU4 boards: 1.8 GHz for A15 cores & 1.3 GHz for A7 cores.
+ * Therefore we need to update OPPs tables and thermal maps accordingly.
+ */
+&cluster_a15_opp_table {
+	/delete-node/opp-2000000000;
+	/delete-node/opp-1900000000;
+};
+
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
+&cpu0_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu1_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu2_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&cpu3_cooling_map4 {
+	cooling-device = <&cpu0 3 7>,
+			 <&cpu1 3 7>,
+			 <&cpu2 3 7>,
+			 <&cpu3 3 7>,
+			 <&cpu4 3 12>,
+			 <&cpu5 3 12>,
+			 <&cpu6 3 12>,
+			 <&cpu7 3 12>;
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbhost2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
index 78e6a502f320..a378d4937ff7 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts
@@ -1,51 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Hardkernel Odroid XU3 board device tree source
  *
  * Copyright (c) 2014 Collabora Ltd.
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
+ */
 
 /dts-v1/;
 #include "exynos5422-odroidxu3-common.dtsi"
+#include "exynos5422-odroidxu3-audio.dtsi"
+#include "exynos54xx-odroidxu-leds.dtsi"
 
 / {
 	model = "Hardkernel Odroid XU3";
 	compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5";
+
+	aliases {
+		ethernet = &ethernet;
+	};
 };
 
 &i2c_0 {
 	status = "okay";
 
 	/* A15 cluster: VDD_ARM */
-	ina231@40 {
+	power-sensor@40 {
 		compatible = "ti,ina231";
 		reg = <0x40>;
 		shunt-resistor = <10000>;
 	};
 
 	/* memory: VDD_MEM */
-	ina231@41 {
+	power-sensor@41 {
 		compatible = "ti,ina231";
 		reg = <0x41>;
 		shunt-resistor = <10000>;
 	};
 
 	/* GPU: VDD_G3D */
-	ina231@44 {
+	power-sensor@44 {
 		compatible = "ti,ina231";
 		reg = <0x44>;
 		shunt-resistor = <10000>;
 	};
 
 	/* A7 cluster: VDD_KFC */
-	ina231@45 {
+	power-sensor@45 {
 		compatible = "ti,ina231";
 		reg = <0x45>;
 		shunt-resistor = <10000>;
 	};
 };
+
+&ldo28_reg {
+	regulator-name = "dp_p3v3";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 1 -- Green LED
+	 * PWM 2 -- Blue LED
+	 * PWM 3 -- on MIPI connector for backlight
+	 */
+	pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbhost2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+			local-mac-address = [00 00 00 00 00 00]; /* Filled in by a bootloader */
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
new file mode 100644
index 000000000000..f5fb617f46bd
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU4 board device tree source
+ *
+ * Copyright (c) 2015 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+/dts-v1/;
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/samsung-i2s.h>
+#include "exynos5422-odroidxu3-common.dtsi"
+
+/ {
+	model = "Hardkernel Odroid XU4";
+	compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	led-controller {
+		compatible = "pwm-leds";
+
+		led-1 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	sound: sound {
+		compatible = "samsung,odroid-xu3-audio";
+		model = "Odroid-XU4";
+
+		samsung,audio-routing = "I2S Playback", "Mixer DAI TX";
+
+		cpu {
+			sound-dai = <&i2s0 0>, <&i2s0 1>;
+		};
+
+		codec {
+			sound-dai = <&hdmi>;
+		};
+	};
+};
+
+&i2s0 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_EPLL>,
+			  <&clock CLK_MOUT_MAU_EPLL>,
+			  <&clock CLK_MOUT_USER_MAU_EPLL>,
+			  <&clock_audss EXYNOS_MOUT_AUDSS>,
+			  <&clock_audss EXYNOS_MOUT_I2S>,
+			  <&i2s0 CLK_I2S_RCLK_SRC>,
+			  <&clock_audss EXYNOS_DOUT_SRP>,
+			  <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+			  <&clock_audss EXYNOS_DOUT_I2S>;
+
+	assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+				 <&clock CLK_MOUT_EPLL>,
+				 <&clock CLK_MOUT_MAU_EPLL>,
+				 <&clock CLK_MAU_EPLL>,
+				 <&clock_audss EXYNOS_MOUT_AUDSS>,
+				 <&clock_audss EXYNOS_SCLK_I2S>;
+
+	assigned-clock-rates = <0>,
+			       <0>,
+			       <0>,
+			       <0>,
+			       <0>,
+			       <0>,
+			       <196608001>,
+			       <(196608002 / 2)>,
+			       <196608000>;
+};
+
+&pwm {
+	/*
+	 * PWM 0 -- fan
+	 * PWM 2 -- Blue LED
+	 */
+	pinctrl-0 = <&pwm0_out &pwm2_out>;
+	pinctrl-names = "default";
+	samsung,pwm-outputs = <0>, <2>;
+	status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "host";
+};
diff --git a/arch/arm/boot/dts/exynos5422-samsung-k3g.dts b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
new file mode 100644
index 000000000000..c35261a338ff
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5422-samsung-k3g.dts
@@ -0,0 +1,679 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung Galaxy S5 (SM-G900H) device-tree source
+ *
+ * Copyright (c) 2023 Markuss Broks
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+	model = "Samsung Galaxy S5 (SM-G900H)";
+	compatible = "samsung,k3g", "samsung,exynos5800", \
+		     "samsung,exynos5";
+
+	chassis-type = "handset";
+
+	aliases {
+		mmc0 = &mmc_0;
+	};
+
+	memory@20000000 {
+		device_type = "memory";
+		reg = <0x20000000 0x80000000>; /* 2 GiB */
+	};
+
+	fixed-rate-clocks {
+		oscclk {
+			compatible = "samsung,exynos5420-oscclk";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	firmware@2073000 {
+		compatible = "samsung,secure-firmware";
+		reg = <0x02073000 0x1000>;
+	};
+
+	tsp_vdd: regulator-tsp-vdd-en {
+		compatible = "regulator-fixed";
+		regulator-name = "tsp_vdd_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpy3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
+&gpu {
+	status = "okay";
+	mali-supply = <&buck4_reg>;
+};
+
+&hsi2c_7 {
+	status = "okay";
+
+	pmic@66 {
+		compatible = "samsung,s2mps11-pmic";
+		reg = <0x66>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-source;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&s2mps11_irq>;
+
+		s2mps11_osc: clocks {
+			compatible = "samsung,s2mps11-clk";
+			#clock-cells = <1>;
+			clock-output-names = "s2mps11_ap",
+					     "s2mps11_cp", "s2mps11_bt";
+		};
+
+		regulators {
+			buck1_reg: BUCK1 {
+				regulator-name = "VDD_MIF";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1300000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck2_reg: BUCK2 {
+				regulator-name = "VDD_ARM";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck3_reg: BUCK3 {
+				regulator-name = "VDD_INT";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck4_reg: BUCK4 {
+				regulator-name = "VDD_G3D";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck5_reg: BUCK5 {
+				regulator-name = "VDD_MEM";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck6_reg: BUCK6 {
+				regulator-name = "VDD_KFC";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			buck7_reg: BUCK7 {
+				regulator-name = "VIN_LLDO";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+			};
+
+			buck8_reg: BUCK8 {
+				regulator-name = "VIN_MLDO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2100000>;
+				regulator-always-on;
+			};
+
+			buck9_reg: BUCK9 {
+				regulator-name = "VIN_HLDO";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-always-on;
+			};
+
+			buck10_reg: BUCK10 {
+				regulator-name = "VDD_CAM_ISP";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <3550000>;
+			};
+
+			ldo1_reg: LDO1 {
+				regulator-name = "VDD_ALIVE";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: LDO2 {
+				regulator-name = "VDD_APIO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo3_reg: LDO3 {
+				regulator-name = "VDD_APIO_MMC01";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo4_reg: LDO4 {
+				regulator-name = "VDD_ADC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo5_reg: LDO5 {
+				regulator-name = "VDD_HRM_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			ldo6_reg: LDO6 {
+				regulator-name = "VDD_MIPI";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo7_reg: LDO7 {
+				regulator-name = "VDD_MIPI_PLL_ABB1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo8_reg: LDO8 {
+				regulator-name = "VDD_VTF";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo9_reg: LDO9 {
+				regulator-name = "VDD_UOTG";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo10_reg: LDO10 {
+				regulator-name = "VDDQ_PRE";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo11_reg: LDO11 {
+				regulator-name = "VDD_HSIC_1V0";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo12_reg: LDO12 {
+				regulator-name = "VDD_HSIC_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo13_reg: LDO13 {
+				regulator-name = "VDD_APIO_MMC2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo14_reg: LDO14 {
+				regulator-name = "VDD_MOTOR";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo15_reg: LDO15 {
+				regulator-name = "VDD_CAM1_2V8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo16_reg: LDO16 {
+				regulator-name = "VDD_AP";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo17_reg: LDO17 {
+				/* Unused */
+				regulator-name = "VDD_LDO17";
+			};
+
+			ldo18_reg: LDO18 {
+				regulator-name = "VDD_CODEC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo19_reg: LDO19 {
+				regulator-name = "VDD_VMMC";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo20_reg: LDO20 {
+				regulator-name = "VDD_CAM1_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo21_reg: LDO21 {
+				regulator-name = "VDD_CAM_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo22_reg: LDO22 {
+				regulator-name = "VDD_CAM0_S_CORE";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo23_reg: LDO23 {
+				regulator-name = "VDD_MIFS";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo24_reg: LDO24 {
+				regulator-name = "VDD_MHL_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo25_reg: LDO25 {
+				regulator-name = "VDD_LCD_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo26_reg: LDO26 {
+				regulator-name = "VDD_CAM0_AF";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo27_reg: LDO27 {
+				regulator-name = "VDD_G3DS";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			ldo28_reg: LDO28 {
+				regulator-name = "VDD_LCD_3V0";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo29_reg: LDO29 {
+				/* Unused */
+				regulator-name = "VDD_LDO29";
+			};
+
+			ldo30_reg: LDO30 {
+				regulator-name = "VDD_TOUCH";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo31_reg: LDO31 {
+				regulator-name = "VDD_COMP";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo32_reg: LDO32 {
+				regulator-name = "VDD_TOUCH_IO";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo33_reg: LDO33 {
+				regulator-name = "VDD_MHL_1V8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo34_reg: LDO34 {
+				regulator-name = "VDD_HRM_3V3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo35_reg: LDO35 {
+				regulator-name = "VDD_SIL";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			ldo36_reg: LDO36 {
+				/* Unused */
+				regulator-name = "VDD_LDO36";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo37_reg: LDO37 {
+				/* Unused */
+				regulator-name = "VDD_LDO37";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+			};
+
+			ldo38_reg: LDO38 {
+				regulator-name = "VDD_KEY_LED";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	status = "okay";
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		interrupt-parent = <&gpx1>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
+		vio-supply = <&ldo32_reg>;
+		vdd-supply = <&tsp_vdd>;
+		syna,startup-delay-ms = <100>;
+
+		pinctrl-0 = <&touch_irq>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <1>;
+		};
+
+		rmi4-f12@12 {
+			reg = <0x12>;
+			syna,sensor-type = <1>;
+		};
+	};
+};
+
+/* eMMC flash */
+&mmc_0 {
+	status = "okay";
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	cap-mmc-highspeed;
+	non-removable;
+	clock-frequency = <400000000>;
+	samsung,dw-mshc-ciu-div = <3>;
+	samsung,dw-mshc-sdr-timing = <0 4>;
+	samsung,dw-mshc-ddr-timing = <0 2>;
+	samsung,dw-mshc-hs400-timing = <0 2>;
+	samsung,read-strobe-delay = <90>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
+	bus-width = <8>;
+};
+
+&pinctrl_0 {
+	s2mps11_irq: s2mps11-irq-pins {
+		samsung,pins = "gpx0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+	};
+
+	touch_irq: touch-irq-pins {
+		samsung,pins = "gpx1-6";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+	};
+};
+
+&rtc {
+	status = "okay";
+	clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+	clock-names = "rtc", "rtc_src";
+};
+
+&timer {
+	arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd_dwc3_1 {
+	dr_mode = "peripheral";
+};
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5440-sd5v1.dts b/arch/arm/boot/dts/exynos5440-sd5v1.dts
deleted file mode 100644
index a98501bab6fc..000000000000
--- a/arch/arm/boot/dts/exynos5440-sd5v1.dts
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * SAMSUNG SD5v1 board device tree source
- *
- * Copyright (c) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SD5v1 board based on EXYNOS5440";
-	compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-
-	spi {
-		status = "disabled";
-	};
-
-};
-
-&gmac {
-	fixed_phy;
-	phy_addr = <1>;
-};
diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts
deleted file mode 100644
index e4443f4e6572..000000000000
--- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * SAMSUNG SSDK5440 board device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/dts-v1/;
-#include "exynos5440.dtsi"
-
-/ {
-	model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
-	compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
-
-	chosen {
-		bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
-	};
-
-	fixed-rate-clocks {
-		xtal {
-			compatible = "samsung,clock-xtal";
-			clock-frequency = <50000000>;
-		};
-	};
-};
-
-&pcie_0 {
-	reset-gpio = <&pin_ctrl 5 0>;
-	status = "okay";
-};
-
-&pcie_1 {
-	reset-gpio = <&pin_ctrl 22 0>;
-	status = "okay";
-};
-
-&spi_0 {
-	flash: w25q128@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "winbond,w25q128";
-		spi-max-frequency = <15625000>;
-		reg = <0>;
-		controller-data {
-			samsung,spi-feedback-delay = <0>;
-		};
-
-		partition@00000 {
-			label = "BootLoader";
-			reg = <0x60000 0x80000>;
-			read-only;
-		};
-
-		partition@e0000 {
-			label = "Recovery-Kernel";
-			reg = <0xe0000 0x300000>;
-			read-only;
-		};
-
-		partition@3e0000 {
-			label = "CRAM-FS";
-			reg = <0x3e0000 0x700000>;
-			read-only;
-		};
-
-		partition@ae0000 {
-			label = "User-Data";
-			reg = <0xae0000 0x520000>;
-		};
-
-	};
-
-};
diff --git a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi b/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
deleted file mode 100644
index 7b2fba0ae92b..000000000000
--- a/arch/arm/boot/dts/exynos5440-tmu-sensor-conf.dtsi
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Device tree sources for Exynos5440 TMU sensor configuration
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <dt-bindings/thermal/thermal_exynos.h>
-
-#thermal-sensor-cells = <0>;
-samsung,tmu_gain = <5>;
-samsung,tmu_reference_voltage = <16>;
-samsung,tmu_noise_cancel_mode = <4>;
-samsung,tmu_efuse_value = <0x5d2d>;
-samsung,tmu_min_efuse_value = <16>;
-samsung,tmu_max_efuse_value = <76>;
-samsung,tmu_first_point_trim = <25>;
-samsung,tmu_second_point_trim = <70>;
-samsung,tmu_default_temp_offset = <25>;
-samsung,tmu_cal_type = <TYPE_ONE_POINT_TRIMMING>;
diff --git a/arch/arm/boot/dts/exynos5440-trip-points.dtsi b/arch/arm/boot/dts/exynos5440-trip-points.dtsi
deleted file mode 100644
index 356e963edf11..000000000000
--- a/arch/arm/boot/dts/exynos5440-trip-points.dtsi
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * Device tree sources for default Exynos5440 thermal zone definition
- *
- * Copyright (c) 2014 Lukasz Majewski <l.majewski@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-polling-delay-passive = <0>;
-polling-delay = <0>;
-trips {
-	cpu-alert-0 {
-		temperature = <100000>; /* millicelsius */
-		hysteresis = <0>; /* millicelsius */
-		type = "active";
-	};
-	cpu-crit-0 {
-		temperature = <105000>; /* millicelsius */
-		hysteresis = <0>; /* millicelsius */
-		type = "critical";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
deleted file mode 100644
index f18b51f2eeaa..000000000000
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * SAMSUNG EXYNOS5440 SoC device tree source
- *
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <dt-bindings/clock/exynos5440.h>
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "samsung,exynos5440", "samsung,exynos5";
-
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &serial_0;
-		serial1 = &serial_1;
-		spi0 = &spi_0;
-		tmuctrl0 = &tmuctrl_0;
-		tmuctrl1 = &tmuctrl_1;
-		tmuctrl2 = &tmuctrl_2;
-	};
-
-	clock: clock-controller@160000 {
-		compatible = "samsung,exynos5440-clock";
-		reg = <0x160000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-	gic: interrupt-controller@2E0000 {
-		compatible = "arm,cortex-a15-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg =	<0x2E1000 0x1000>,
-			<0x2E2000 0x1000>,
-			<0x2E4000 0x2000>,
-			<0x2E6000 0x2000>;
-		interrupts = <1 9 0xf04>;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <0>;
-		};
-		cpu@1 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <1>;
-		};
-		cpu@2 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <2>;
-		};
-		cpu@3 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a15";
-			reg = <3>;
-		};
-	};
-
-	arm-pmu {
-		compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu";
-		interrupts = <0 52 4>,
-			     <0 53 4>,
-			     <0 54 4>,
-			     <0 55 4>;
-	};
-
-	timer {
-		compatible = "arm,cortex-a15-timer",
-			     "arm,armv7-timer";
-		interrupts = <1 13 0xf08>,
-			     <1 14 0xf08>,
-			     <1 11 0xf08>,
-			     <1 10 0xf08>;
-		clock-frequency = <50000000>;
-	};
-
-	cpufreq@160000 {
-		compatible = "samsung,exynos5440-cpufreq";
-		reg = <0x160000 0x1000>;
-		interrupts = <0 57 0>;
-		operating-points = <
-				/* KHz	  uV */
-				1500000 1100000
-				1400000 1075000
-				1300000 1050000
-				1200000 1025000
-				1100000 1000000
-				1000000 975000
-				900000  950000
-				800000  925000
-		>;
-	};
-
-	serial_0: serial@B0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xB0000 0x1000>;
-		interrupts = <0 2 0>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	serial_1: serial@C0000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0xC0000 0x1000>;
-		interrupts = <0 3 0>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
-	spi_0: spi@D0000 {
-		compatible = "samsung,exynos5440-spi";
-		reg = <0xD0000 0x100>;
-		interrupts = <0 4 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		samsung,spi-src-clk = <0>;
-		num-cs = <1>;
-		clocks = <&clock CLK_B_125>, <&clock CLK_SPI_BAUD>;
-		clock-names = "spi", "spi_busclk0";
-	};
-
-	pin_ctrl: pinctrl {
-		compatible = "samsung,exynos5440-pinctrl";
-		reg = <0xE0000 0x1000>;
-		interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
-			     <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		#gpio-cells = <2>;
-
-		fan: fan {
-			samsung,exynos5440-pin-function = <1>;
-		};
-
-		hdd_led0: hdd_led0 {
-			samsung,exynos5440-pin-function = <2>;
-		};
-
-		hdd_led1: hdd_led1 {
-			samsung,exynos5440-pin-function = <3>;
-		};
-
-		uart1: uart1 {
-			samsung,exynos5440-pin-function = <4>;
-		};
-	};
-
-	i2c@F0000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0xF0000 0x1000>;
-		interrupts = <0 5 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	i2c@100000 {
-		compatible = "samsung,exynos5440-i2c";
-		reg = <0x100000 0x1000>;
-		interrupts = <0 6 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "i2c";
-	};
-
-	watchdog@110000 {
-		compatible = "samsung,s3c2410-wdt";
-		reg = <0x110000 0x1000>;
-		interrupts = <0 1 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "watchdog";
-	};
-
-	gmac: ethernet@00230000 {
-		compatible = "snps,dwmac-3.70a";
-		reg = <0x00230000 0x8000>;
-		interrupt-parent = <&gic>;
-		interrupts = <0 31 4>;
-		interrupt-names = "macirq";
-		phy-mode = "sgmii";
-		clocks = <&clock CLK_GMAC0>;
-		clock-names = "stmmaceth";
-	};
-
-	amba {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "arm,amba-bus";
-		interrupt-parent = <&gic>;
-		ranges;
-	};
-
-	rtc {
-		compatible = "samsung,s3c6410-rtc";
-		reg = <0x130000 0x1000>;
-		interrupts = <0 17 0>, <0 16 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "rtc";
-	};
-
-	tmuctrl_0: tmuctrl@160118 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160118 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	tmuctrl_1: tmuctrl@16011C {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x16011C 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	tmuctrl_2: tmuctrl@160120 {
-		compatible = "samsung,exynos5440-tmu";
-		reg = <0x160120 0x230>, <0x160368 0x10>;
-		interrupts = <0 58 0>;
-		clocks = <&clock CLK_B_125>;
-		clock-names = "tmu_apbif";
-		#include "exynos5440-tmu-sensor-conf.dtsi"
-	};
-
-	thermal-zones {
-		cpu0_thermal: cpu0-thermal {
-			thermal-sensors = <&tmuctrl_0>;
-			#include "exynos5440-trip-points.dtsi"
-		};
-		cpu1_thermal: cpu1-thermal {
-		       thermal-sensors = <&tmuctrl_1>;
-		       #include "exynos5440-trip-points.dtsi"
-		};
-		cpu2_thermal: cpu2-thermal {
-		       thermal-sensors = <&tmuctrl_2>;
-		       #include "exynos5440-trip-points.dtsi"
-		};
-	};
-
-	sata@210000 {
-		compatible = "snps,exynos5440-ahci";
-		reg = <0x210000 0x10000>;
-		interrupts = <0 30 0>;
-		clocks = <&clock CLK_SATA>;
-		clock-names = "sata";
-	};
-
-	ohci@220000 {
-		compatible = "samsung,exynos5440-ohci";
-		reg = <0x220000 0x1000>;
-		interrupts = <0 29 0>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	ehci@221000 {
-		compatible = "samsung,exynos5440-ehci";
-		reg = <0x221000 0x1000>;
-		interrupts = <0 29 0>;
-		clocks = <&clock CLK_USB>;
-		clock-names = "usbhost";
-	};
-
-	pcie_0: pcie@290000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x290000 0x1000
-			0x270000 0x1000
-			0x271000 0x40>;
-		interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
-		clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x40000000 0x40000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x40001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x40011000 0x40011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 53>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-
-	pcie_1: pcie@2a0000 {
-		compatible = "samsung,exynos5440-pcie", "snps,dw-pcie";
-		reg = <0x2a0000 0x1000
-			0x272000 0x1000
-			0x271040 0x40>;
-		interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
-		clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
-		clock-names = "pcie", "pcie_bus";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		ranges = <0x00000800 0 0x60000000 0x60000000 0 0x00001000   /* configuration space */
-			  0x81000000 0 0	  0x60001000 0 0x00010000   /* downstream I/O */
-			  0x82000000 0 0x60011000 0x60011000 0 0x1ffef000>; /* non-prefetchable memory */
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 0>;
-		interrupt-map = <0x0 0 &gic 56>;
-		num-lanes = <4>;
-		status = "disabled";
-	};
-};
diff --git a/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
new file mode 100644
index 000000000000..8c0e1716c0b3
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx-odroidxu-leds.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Hardkernel Odroid XU/XU3 LED device tree source
+ *
+ * Copyright (c) 2015,2016 Krzysztof Kozlowski
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "green:mmc0";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_GREEN>;
+			pwms = <&pwm 1 2000000 0>;
+			pwm-names = "pwm1";
+			/*
+			 * Green LED is much brighter than the others
+			 * so limit its max brightness
+			 */
+			max-brightness = <127>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-2 {
+			function = LED_FUNCTION_HEARTBEAT;
+			color = <LED_COLOR_ID_BLUE>;
+			pwms = <&pwm 2 2000000 0>;
+			pwm-names = "pwm2";
+			max-brightness = <255>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+
+		led-3 {
+			label = "red:microSD";
+			function = LED_FUNCTION_DISK_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "mmc1";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
new file mode 100644
index 000000000000..5c799886c275
--- /dev/null
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos54xx SoC series common device tree source
+ *
+ * Copyright (c) 2012-2013 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2016 Krzysztof Kozlowski
+ *
+ * Device nodes common for Samsung Exynos5410/5420/5422/5800. Specific
+ * Exynos 54xx SoCs should include this file and customize it further
+ * (e.g. with clocks).
+ */
+
+#include "exynos5.dtsi"
+
+/ {
+	compatible = "samsung,exynos5";
+
+	aliases {
+		i2c4 = &hsi2c_4;
+		i2c5 = &hsi2c_5;
+		i2c6 = &hsi2c_6;
+		i2c7 = &hsi2c_7;
+		usbdrdphy0 = &usbdrd_phy0;
+		usbdrdphy1 = &usbdrd_phy1;
+	};
+
+	arm_a7_pmu: arm-a7-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+
+	arm_a15_pmu: arm-a15-pmu {
+		compatible = "arm,cortex-a15-pmu";
+		interrupt-parent = <&combiner>;
+		interrupts = <1 2>,
+			     <7 0>,
+			     <16 6>,
+			     <19 2>;
+		status = "disabled";
+	};
+
+	timer: timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+	};
+
+	soc: soc {
+		sram@2020000 {
+			compatible = "mmio-sram";
+			reg = <0x02020000 0x54000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x02020000 0x54000>;
+
+			smp-sram@0 {
+				compatible = "samsung,exynos4210-sysram";
+				reg = <0x0 0x1000>;
+			};
+
+			smp-sram@53000 {
+				compatible = "samsung,exynos4210-sysram-ns";
+				reg = <0x53000 0x1000>;
+			};
+		};
+
+		mct: timer@101c0000 {
+			compatible = "samsung,exynos5420-mct",
+				     "samsung,exynos4210-mct";
+			reg = <0x101c0000 0xb00>;
+			interrupts-extended = <&combiner 23 3>,
+					      <&combiner 23 4>,
+					      <&combiner 25 2>,
+					      <&combiner 25 3>,
+					      <&gic GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					      <&gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		watchdog: watchdog@101d0000 {
+			compatible = "samsung,exynos5420-wdt";
+			reg = <0x101d0000 0x100>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		adc: adc@12d10000 {
+			compatible = "samsung,exynos-adc-v2";
+			reg = <0x12d10000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
+		/* i2c_0-3 are defined in exynos5.dtsi */
+		hsi2c_4: i2c@12ca0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12ca0000 0x1000>;
+			interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_5: i2c@12cb0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cb0000 0x1000>;
+			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_6: i2c@12cc0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cc0000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		hsi2c_7: i2c@12cd0000 {
+			compatible = "samsung,exynos5250-hsi2c";
+			reg = <0x12cd0000 0x1000>;
+			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		usbdrd3_0: usb@12000000 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12000000 0x10000>;
+
+			usbdrd_dwc3_0: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usbdrd_phy0: phy@12100000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12100000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbdrd3_1: usb@12400000 {
+			compatible = "samsung,exynos5250-dwusb3";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x12400000 0x10000>;
+
+			usbdrd_dwc3_1: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				phys = <&usbdrd_phy1 0>, <&usbdrd_phy1 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usbdrd_phy1: phy@12500000 {
+			compatible = "samsung,exynos5420-usbdrd-phy";
+			reg = <0x12500000 0x100>;
+			#phy-cells = <1>;
+		};
+
+		usbhost2: usb@12110000 {
+			compatible = "samsung,exynos4210-ehci";
+			reg = <0x12110000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb2_phy 0>;
+			phy-names = "host";
+		};
+
+		usbhost1: usb@12120000 {
+			compatible = "samsung,exynos4210-ohci";
+			reg = <0x12120000 0x100>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			phys = <&usb2_phy 0>;
+			phy-names = "host";
+		};
+
+		usb2_phy: phy@12130000 {
+			compatible = "samsung,exynos5420-usb2-phy";
+			reg = <0x12130000 0x100>;
+			#phy-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 7d5b386b5ae6..1f544f12da6c 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Google Peach Pi Rev 10+ board device tree source
  *
  * Copyright (c) 2014 Google, Inc
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
@@ -14,7 +11,9 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/maxim,max77802.h>
 #include <dt-bindings/regulator/maxim,max77802.h>
+#include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
+#include "exynos5420-cpus.dtsi"
 
 / {
 	model = "Google Peach Pi Rev 10+";
@@ -25,10 +24,14 @@
 		"google,pi-rev11", "google,pi-rev10",
 		"google,pi", "google,peach", "samsung,exynos5800",
 		"samsung,exynos5";
+	chassis-type = "laptop";
 
 	aliases {
 		/* Assign 20 so we don't get confused w/ builtin ones */
-		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
+		i2c20 = &i2c_tunnel;
+		mmc0 = &mmc_0; /* eMMC */
+		mmc1 = &mmc_2; /* SD */
+		mmc2 = &mmc_1; /* WiFi */
 	};
 
 	backlight: backlight {
@@ -59,11 +62,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&power_key_irq &lid_irq>;
 
-		power {
+		power-key {
 			label = "Power";
 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		lid-switch {
@@ -72,12 +75,13 @@
 			linux,input-type = <5>; /* EV_SW */
 			linux,code = <0>; /* SW_LID */
 			debounce-interval = <1>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 	};
 
-	memory {
+	memory@20000000 {
+		device_type = "memory";
 		reg = <0x20000000 0x80000000>;
 	};
 
@@ -87,6 +91,14 @@
 		samsung,model = "Peach-Pi-I2S-MAX98091";
 		samsung,i2s-controller = <&i2s0>;
 		samsung,audio-codec = <&max98091>;
+
+		cpu {
+			sound-dai = <&i2s0 0>;
+		};
+
+		codec {
+			sound-dai = <&max98091>, <&hdmi>;
+		};
 	};
 
 	usb300_vbus_reg: regulator-usb300 {
@@ -94,7 +106,7 @@
 		regulator-name = "P5.0V_USB3CON0";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 0 0>;
+		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb300_vbus_en>;
 		enable-active-high;
@@ -105,7 +117,7 @@
 		regulator-name = "P5.0V_USB3CON1";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gph0 1 0>;
+		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb301_vbus_en>;
 		enable-active-high;
@@ -122,9 +134,15 @@
 		compatible = "auo,b133htn01";
 		power-supply = <&tps65090_fet6>;
 		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dp_out>;
+			};
+		};
 	};
 
-	mmc1_pwrseq: mmc1_pwrseq {
+	mmc1_pwrseq: mmc1-pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
 		clocks = <&max77802 MAX77802_CLK_32K_CP>;
@@ -137,18 +155,45 @@
 	vdd-supply = <&ldo9_reg>;
 };
 
+&clock_audss {
+	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
+	assigned-clock-parents = <&clock CLK_MAU_EPLL>;
+};
+
+/*
+ * Peach Pi board uses SoC revision with lower maximum frequency for A7 cores
+ * (1.3 GHz instead of 1.4 GHz) than Odroid XU3/XU4 boards.  Thus we need to
+ * update A7 OPPs table accordingly.
+ */
+&cluster_a7_opp_table {
+	/delete-node/opp-1400000000;
+};
+
+&cpu0 {
+	cpu-supply = <&buck2_reg>;
+};
+
+&cpu4 {
+	cpu-supply = <&buck6_reg>;
+};
+
 &dp {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&dp_hpd_gpio>;
 	samsung,color-space = <0>;
-	samsung,dynamic-range = <0>;
-	samsung,ycbcr-coeff = <0>;
 	samsung,color-depth = <1>;
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <2>;
-	samsung,hpd-gpio = <&gpx2 6 0>;
-	panel = <&panel>;
+	samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+
+	ports {
+		port {
+			dp_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
 };
 
 &fimd {
@@ -158,7 +203,7 @@
 
 &hdmi {
 	status = "okay";
-	hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_hpd_irq>;
 	ddc = <&i2c_2>;
@@ -173,13 +218,13 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	max77802: max77802-pmic@9 {
+	max77802: pmic@9 {
 		compatible = "maxim,max77802";
 		interrupt-parent = <&gpx3>;
 		interrupts = <1 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
-			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+			    <&pmic_dvs_1>, <&pmic_dvs_2>;
 		wakeup-source;
 		reg = <0x9>;
 		#clock-cells = <1>;
@@ -225,6 +270,8 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck3_reg>;
+				regulator-coupled-max-spread = <300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -237,6 +284,8 @@
 				regulator-always-on;
 				regulator-boot-on;
 				regulator-ramp-delay = <12500>;
+				regulator-coupled-with = <&buck2_reg>;
+				regulator-coupled-max-spread = <300000>;
 				regulator-state-mem {
 					regulator-off-in-suspend;
 				};
@@ -258,7 +307,6 @@
 				regulator-name = "vdd_1v2";
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
 				regulator-boot-on;
 				regulator-state-mem {
 					regulator-off-in-suspend;
@@ -399,7 +447,6 @@
 				regulator-name = "vdd_ldo9";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
 				regulator-state-mem {
 					regulator-on-in-suspend;
 					regulator-mode = <MAX77802_OPMODE_LP>;
@@ -588,12 +635,13 @@
 	max98091: codec@10 {
 		compatible = "maxim,max98091";
 		reg = <0x10>;
-		interrupts = <2 0>;
+		interrupts = <2 IRQ_TYPE_NONE>;
 		interrupt-parent = <&gpx0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&max98091_irq>;
 		clocks = <&pmu_system_controller 0>;
 		clock-names = "mclk";
+		#sound-dai-cells = <0>;
 	};
 
 	light-sensor@44 {
@@ -646,18 +694,23 @@
 };
 
 &i2s0 {
+	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
+	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
 	status = "okay";
 };
 
+&mixer {
+	status = "okay";
+};
+
+/* eMMC flash */
 &mmc_0 {
 	status = "okay";
-	num-slots = <1>;
-	broken-cd;
+	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	mmc-hs400-1_8v;
 	cap-mmc-highspeed;
 	non-removable;
-	card-detect-delay = <200>;
 	clock-frequency = <800000000>;
 	samsung,dw-mshc-ciu-div = <3>;
 	samsung,dw-mshc-sdr-timing = <0 4>;
@@ -669,13 +722,12 @@
 	bus-width = <8>;
 };
 
+/* WiFi SDIO module */
 &mmc_1 {
 	status = "okay";
-	num-slots = <1>;
-	broken-cd;
+	non-removable;
 	cap-sdio-irq;
 	keep-power-in-suspend;
-	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
 	samsung,dw-mshc-ciu-div = <1>;
 	samsung,dw-mshc-sdr-timing = <0 1>;
@@ -689,9 +741,9 @@
 	vqmmc-supply = <&buck10_reg>;
 };
 
+/* uSD card */
 &mmc_2 {
 	status = "okay";
-	num-slots = <1>;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	clock-frequency = <400000000>;
@@ -708,176 +760,174 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mask_tpm_reset>;
 
-	wifi_en: wifi-en {
+	wifi_en: wifi-en-pins {
 		samsung,pins = "gpx0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max98091_irq: max98091-irq {
+	max98091_irq: max98091-irq-pins {
 		samsung,pins = "gpx0-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
-	mask_tpm_reset: mask-tpm-reset {
+	mask_tpm_reset: mask-tpm-reset-pins {
 		samsung,pins = "gpx0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 		samsung,pin-val = <0>;
 	};
 
-	tpm_irq: tpm-irq {
+	tpm_irq: tpm-irq-pins {
 		samsung,pins = "gpx1-0";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	trackpad_irq: trackpad-irq {
+	trackpad_irq: trackpad-irq-pins {
 		samsung,pins = "gpx1-1";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	power_key_irq: power-key-irq {
+	power_key_irq: power-key-irq-pins {
 		samsung,pins = "gpx1-2";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	ec_irq: ec-irq {
+	ec_irq: ec-irq-pins {
 		samsung,pins = "gpx1-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	tps65090_irq: tps65090-irq {
+	tps65090_irq: tps65090-irq-pins {
 		samsung,pins = "gpx2-5";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	dp_hpd_gpio: dp_hpd_gpio {
+	dp_hpd_gpio: dp-hpd-gpio-pins {
 		samsung,pins = "gpx2-6";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <3>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	max77802_irq: max77802-irq {
+	max77802_irq: max77802-irq-pins {
 		samsung,pins = "gpx3-1";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	lid_irq: lid-irq {
+	lid_irq: lid-irq-pins {
 		samsung,pins = "gpx3-4";
-		samsung,pin-function = <0xf>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	hdmi_hpd_irq: hdmi-hpd-irq {
+	hdmi_hpd_irq: hdmi-hpd-irq-pins {
 		samsung,pins = "gpx3-7";
-		samsung,pin-function = <0>;
-		samsung,pin-pud = <1>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_dvs_1: pmic-dvs-1 {
+	pmic_dvs_1: pmic-dvs-1-pins {
 		samsung,pins = "gpy7-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
-&pinctrl_1 {
-	/* Adjust WiFi drive strengths lower for EMI */
-	sd1_clk: sd1-clk {
-		samsung,pin-drv = <2>;
-	};
+/* pinctrl_1 */
+/* Adjust WiFi drive strengths lower for EMI */
+&sd1_bus1 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_cmd: sd1-cmd {
-		samsung,pin-drv = <2>;
-	};
+&sd1_bus4 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus1: sd1-bus-width1 {
-		samsung,pin-drv = <2>;
-	};
+&sd1_bus8 {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus4: sd1-bus-width4 {
-		samsung,pin-drv = <2>;
-	};
+&sd1_clk {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
+};
 
-	sd1_bus8: sd1-bus-width8 {
-		samsung,pin-drv = <2>;
-	};
+&sd1_cmd {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_2 {
-	pmic_dvs_2: pmic-dvs-2 {
-		samsung,pins = "gpj4-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+	pmic_dvs_2: pmic-dvs-2-pins {
+		samsung,pins = "gpj4-2", "gpj4-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
+};
 
-	pmic_dvs_3: pmic-dvs-3 {
-		samsung,pins = "gpj4-3";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
-	};
+/* pinctrl_3*/
+/* Drive SPI lines at x2 for better integrity */
+&spi2_bus {
+	samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 };
 
 &pinctrl_3 {
-	/* Drive SPI lines at x2 for better integrity */
-	spi2-bus {
-		samsung,pin-drv = <2>;
-	};
-
 	/* Drive SPI chip select at x2 for better integrity */
-	ec_spi_cs: ec-spi-cs {
+	ec_spi_cs: ec-spi-cs-pins {
 		samsung,pins = "gpb1-2";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <2>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 	};
 
-	usb300_vbus_en: usb300-vbus-en {
+	usb300_vbus_en: usb300-vbus-en-pins {
 		samsung,pins = "gph0-0";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	usb301_vbus_en: usb301-vbus-en {
+	usb301_vbus_en: usb301-vbus-en-pins {
 		samsung,pins = "gph0-1";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 
-	pmic_selb: pmic-selb {
+	pmic_selb: pmic-selb-pins {
 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 			       "gph0-6";
-		samsung,pin-function = <1>;
-		samsung,pin-pud = <0>;
-		samsung,pin-drv = <0>;
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
 
+&pmu_system_controller {
+	assigned-clocks = <&pmu_system_controller 0>;
+	assigned-clock-parents = <&clock CLK_FIN_PLL>;
+};
+
 &rtc {
 	status = "okay";
 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
@@ -888,22 +938,23 @@
 	status = "okay";
 	num-cs = <1>;
 	samsung,spi-src-clk = <0>;
-	cs-gpios = <&gpb1 2 0>;
+	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
 
 	cros_ec: cros-ec@0 {
 		compatible = "google,cros-ec-spi";
 		interrupt-parent = <&gpx1>;
-		interrupts = <5 0>;
+		interrupts = <5 IRQ_TYPE_NONE>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&ec_spi_cs &ec_irq>;
 		reg = <0>;
 		spi-max-frequency = <3125000>;
+		google,has-vbc-nvram;
 
 		controller-data {
 			samsung,spi-feedback-delay = <1>;
 		};
 
-		i2c-tunnel {
+		i2c_tunnel: i2c-tunnel {
 			compatible = "google,cros-ec-i2c-tunnel";
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -994,6 +1045,40 @@
 	status = "okay";
 };
 
+&timer {
+	arm,cpu-registers-not-fw-configured;
+};
+
+&tmu_cpu0 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu1 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu2 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_cpu3 {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&tmu_gpu {
+	vtmu-supply = <&ldo10_reg>;
+};
+
+&usbdrd3_0 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
+&usbdrd3_1 {
+	vdd10-supply = <&ldo15_reg>;
+	vdd33-supply = <&ldo12_reg>;
+};
+
 &usbdrd_dwc3_0 {
 	dr_mode = "host";
 };
diff --git a/arch/arm/boot/dts/exynos5800.dtsi b/arch/arm/boot/dts/exynos5800.dtsi
index c0bb3563cac1..8328ddb3b02f 100644
--- a/arch/arm/boot/dts/exynos5800.dtsi
+++ b/arch/arm/boot/dts/exynos5800.dtsi
@@ -1,16 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * SAMSUNG EXYNOS5800 SoC device tree source
+ * Samsung Exynos5800 SoC device tree source
  *
  * Copyright (c) 2014 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * SAMSUNG EXYNOS5800 SoC device nodes are listed in this file.
- * EXYNOS5800 based board files can include this file and provide
+ * Samsung Exynos5800 SoC device nodes are listed in this file.
+ * Exynos5800 based board files can include this file and provide
  * values for board specfic bindings.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 #include "exynos5420.dtsi"
@@ -20,9 +17,150 @@
 };
 
 &clock {
-	compatible = "samsung,exynos5800-clock";
+	compatible = "samsung,exynos5800-clock", "syscon";
+};
+
+&cluster_a15_opp_table {
+	opp-2000000000 {
+		opp-hz = /bits/ 64 <2000000000>;
+		opp-microvolt = <1312500 1312500 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1900000000 {
+		opp-hz = /bits/ 64 <1900000000>;
+		opp-microvolt = <1262500 1262500 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1800000000 {
+		opp-hz = /bits/ 64 <1800000000>;
+		opp-microvolt = <1237500 1237500 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1700000000 {
+		opp-microvolt = <1250000 1250000 1500000>;
+	};
+	opp-1600000000 {
+		opp-microvolt = <1250000 1250000 1500000>;
+	};
+	opp-1500000000 {
+		opp-microvolt = <1100000 1100000 1500000>;
+	};
+	opp-1400000000 {
+		opp-microvolt = <1100000 1100000 1500000>;
+	};
+	opp-1300000000 {
+		opp-microvolt = <1100000 1100000 1500000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-1100000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-1000000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-900000000 {
+		opp-microvolt = <1000000 1000000 1500000>;
+	};
+	opp-800000000 {
+		opp-microvolt = <900000 900000 1500000>;
+	};
+	opp-700000000 {
+		opp-microvolt = <900000 900000 1500000>;
+	};
+	opp-600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000 900000 1500000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
+&cluster_a7_opp_table {
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-microvolt = <1275000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-1300000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1200000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1100000000 {
+		opp-microvolt = <1250000>;
+	};
+	opp-1000000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp-900000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp-800000000 {
+		opp-microvolt = <1100000>;
+	};
+	opp-700000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp-600000000 {
+		opp-microvolt = <1000000>;
+	};
+	opp-500000000 {
+		opp-hz = /bits/ 64 <500000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <1000000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+	opp-200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <900000>;
+		clock-latency-ns = <140000>;
+	};
+};
+
+&dsi {
+	compatible = "samsung,exynos5422-mipi-dsi";
 };
 
 &mfc {
 	compatible = "samsung,mfc-v8";
 };
+
+&soc {
+	cam_pd: power-domain@10045100 {
+		compatible = "samsung,exynos4210-pd";
+		reg = <0x10045100 0x20>;
+		#power-domain-cells = <0>;
+		label = "CAM";
+	};
+};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
new file mode 100644
index 000000000000..7f3652dea550
--- /dev/null
+++ b/arch/arm/boot/dts/facebook-bmc-flash-layout-128.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 119 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x7700000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (8MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@7800000 {
+		reg = <0x7800000 0x800000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
new file mode 100644
index 000000000000..87bb8b576250
--- /dev/null
+++ b/arch/arm/boot/dts/facebook-bmc-flash-layout.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2018 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	u-boot@0 {
+		reg = <0x0 0x60000>;
+		label = "u-boot";
+	};
+
+	u-boot-env@60000 {
+		reg = <0x60000 0x20000>;
+		label = "env";
+	};
+
+	fit@80000 {
+		reg = <0x80000 0x1b80000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition is used by several Facebook BMC platforms
+	 * as persistent data store.
+	 */
+	data0@1c00000 {
+		reg = <0x1c00000 0x400000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x2000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi
index 0d0e62489d93..dbba33e5a06c 100644
--- a/arch/arm/boot/dts/ge863-pro3.dtsi
+++ b/arch/arm/boot/dts/ge863-pro3.dtsi
@@ -1,25 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3
  *
  * Copyright (C) 2012 Telit,
  *               2012 Fabio Porcedda <fabio.porcedda@gmail.com>
- *
- * Licensed under GPLv2 or later.
  */
 
 #include "at91sam9260.dtsi"
 
 / {
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		main_clock: clock@0 {
-			compatible = "atmel,osc", "fixed-clock";
-			clock-frequency = <6000000>;
-		};
-
 		main_xtal {
 			clock-frequency = <6000000>;
 		};
@@ -27,25 +17,56 @@
 
 	ahb {
 		apb {
+			tcb0: timer@fffa0000 {
+				timer@0 {
+					compatible = "atmel,tcb-timer";
+					reg = <0>, <1>;
+				};
+
+				timer@2 {
+					compatible = "atmel,tcb-timer";
+					reg = <2>;
+				};
+			};
+
 			dbgu: serial@fffff200 {
 				status = "okay";
 			};
 		};
 
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "soft";
-			nand-on-flash-bbt;
+		ebi: ebi@10000000 {
 			status = "okay";
 
-			boot@0 {
-				label = "boot";
-				reg = <0x0 0x7c0000>;
-			};
+			nand_controller: nand-controller {
+				status = "okay";
+				pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
+				pinctrl-names = "default";
+
+				nand@3 {
+					reg = <0x3 0x0 0x800000>;
+					rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
+					cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
+					nand-bus-width = <8>;
+					nand-ecc-mode = "soft";
+					nand-on-flash-bbt;
+					label = "atmel_nand";
+
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
+
+						boot@0 {
+							label = "boot";
+							reg = <0x0 0x7c0000>;
+						};
 
-			root@07c0000 {
-				label = "root";
-				reg = <0x7c0000 0x7840000>;
+						root@7c0000 {
+							label = "root";
+							reg = <0x7c0000 0x7840000>;
+						};
+					};
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
new file mode 100644
index 000000000000..396149664297
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -0,0 +1,492 @@
+/*
+ * Device Tree file for D-Link DIR-685 Xtreme N Storage Router
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "D-Link DIR-685 Xtreme N Storage Router";
+	compatible = "dlink,dir-685", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB SDRAM in 2 x Hynix HY5DU121622DTP-D43 */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-esc {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			/* Collides with LPC_LAD[0], UART DCD, SSP 97RST */
+			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+		};
+		button-eject {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_EJECTCD>;
+			label = "unmount";
+			/* Collides with LPC LFRAME, UART RTS, SSP TXD */
+			gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	vdisp: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "display-power";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		/* Collides with LCD E */
+		gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Collides with IDE pins, that's cool (we do not use them) */
+		sck-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		panel: display@0 {
+			compatible = "dlink,dir-685-panel", "ilitek,ili9322";
+			reg = <0>;
+			/* 50 ns min period = 20 MHz */
+			spi-max-frequency = <20000000>;
+			vcc-supply = <&vdisp>;
+			iovcc-supply = <&vdisp>;
+			vci-supply = <&vdisp>;
+
+			port {
+				panel_in: endpoint {
+					remote-endpoint = <&display_out>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-wps {
+			label = "dir685:blue:WPS";
+			/* Collides with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		/*
+		 * These two LEDs are on the side of the device.
+		 * For electrical reasons, both LEDs cannot be active
+		 * at the same time so only blue or orange can be on at
+		 * one time. Enabling both makes the LED go dark.
+		 * The LEDs both sit inside the unmount button and the
+		 * label on the case says "unmount".
+		 */
+		led-blue-hd {
+			label = "dir685:blue:HD";
+			/* Collides with LPC_SERIRQ, UART DTR, SSP FSC pins */
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-orange-hd {
+			label = "dir685:orange:HD";
+			/* Collides with LPC_LAD[2], UART DSR, SSP ECLK pins */
+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
+	 * sensor. It is turned on when the temperature exceeds 46 degrees
+	 * and turned off when the temperatures goes below 41 degrees
+	 * (celsius).
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		/* Collides with IDE */
+		gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		#cooling-cells = <2>;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+			/*  Use the thermal sensor in the hard drive */
+			thermal-sensors = <&drive0>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				alert: chassis-alert {
+					/* At 43 degrees turn on the fan */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&alert>;
+					cooling-device = <&fan0 1 1>;
+				};
+			};
+		};
+	};
+
+	/*
+	 * The touchpad input is connected to a GPIO bit-banged
+	 * I2C bus.
+	 */
+	i2c {
+		compatible = "i2c-gpio";
+		/* Collides with ICE */
+		sda-gpios = <&gpio0 5 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkeys@26 {
+			compatible = "dlink,dir685-touchkeys";
+			reg = <0x26>;
+			interrupt-parent = <&gpio0>;
+			/* Collides with NAND flash */
+			interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+		};
+	};
+
+	/* This is a RealTek RTL8366RB switch and PHY using SMI over GPIO */
+	switch {
+		compatible = "realtek,rtl8366rb";
+		/* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */
+		mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+		realtek,disable-leds;
+
+		switch_intc: interrupt-controller {
+			/* GPIO 15 provides the interrupt */
+			interrupt-parent = <&gpio0>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan0";
+				phy-handle = <&phy0>;
+			};
+			port@1 {
+				reg = <1>;
+				label = "lan1";
+				phy-handle = <&phy1>;
+			};
+			port@2 {
+				reg = <2>;
+				label = "lan2";
+				phy-handle = <&phy2>;
+			};
+			port@3 {
+				reg = <3>;
+				label = "lan3";
+				phy-handle = <&phy3>;
+			};
+			port@4 {
+				reg = <4>;
+				label = "wan";
+				phy-handle = <&phy4>;
+			};
+			rtl8366rb_cpu_port: port@5 {
+				reg = <5>;
+				label = "cpu";
+				ethernet = <&gmac0>;
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+		};
+
+		mdio {
+			compatible = "realtek,smi-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			phy0: phy@0 {
+				reg = <0>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <0>;
+			};
+			phy1: phy@1 {
+				reg = <1>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <1>;
+			};
+			phy2: phy@2 {
+				reg = <2>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <2>;
+			};
+			phy3: phy@3 {
+				reg = <3>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <3>;
+			};
+			phy4: phy@4 {
+				reg = <4>;
+				interrupt-parent = <&switch_intc>;
+				interrupts = <12>;
+			};
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * Flash access collides with the Chip Enable signal for
+			 * the display panel, that reuse the parallel flash Chip
+			 * Select 1 (CS1). We switch the pin control state so we
+			 * enable these pins for flash access only when we need
+			 * then, and when disabled they can be used for GPIO which
+			 * is what the display panel needs.
+			 */
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+
+			/* 32MB of flash */
+			reg = <0x30000000 0x02000000>;
+
+			partitions {
+				compatible = "fixed-partitions";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				/*
+				 * This "RedBoot" is the Storlink derivative.
+				 */
+				partition@0 {
+					label = "RedBoot";
+					reg = <0x00000000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This firmware image contains the kernel catenated
+				 * with the squashfs root filesystem. For some reason
+				 * this is called "upgrade" on the vendor system.
+				 */
+				partition@40000 {
+					label = "upgrade";
+					reg = <0x00040000 0x01f40000>;
+					read-only;
+				};
+				/* RGDB, Residental Gateway Database? */
+				partition@1f80000 {
+					label = "rgdb";
+					reg = <0x01f80000 0x00040000>;
+					read-only;
+				};
+				/*
+				 * This partition contains MAC addresses for WAN,
+				 * WLAN and LAN, and the country code (for wireless
+				 * I guess).
+				 */
+				partition@1fc0000 {
+					label = "nvram";
+					reg = <0x01fc0000 0x00020000>;
+					read-only;
+				};
+				partition@1fe0000 {
+					label = "LangPack";
+					reg = <0x01fe0000 0x00020000>;
+					read-only;
+				};
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 5, 6 used by TK I2C
+				 * gpio0bgrp cover line 7 used by WPS LED
+				 * gpio0cgrp cover line 8, 13 used by keys
+				 *           and 11, 12 used by the HD LEDs
+				 *           and line 14, 15 used by RTL8366
+				 *           RESET and phy ready
+				 * gpio0egrp cover line 16 used by VDISP
+				 * gpio0fgrp cover line 17 used by TK IRQ
+				 * gpio0ggrp cover line 20 used by panel CS
+				 * gpio0hgrp cover line 21,22 used by RTL8366RB MDIO
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0cgrp",
+						"gpio0egrp",
+						"gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio1bgrp cover line 5,8,7 used by panel SPI
+				 * also line 6 used by the fan
+				 *
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1bgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV",
+						     "Y7 GMAC0 RXC", "Y11 GMAC1 RXC",
+						     "T8 GMAC0 TXEN", "W11 GMAC1 TXEN",
+						     "U8 GMAC0 TXC", "V11 GMAC1 TXC",
+						     "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						     "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						     "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						     "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						     "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						     "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						     "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						     "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf1 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+
+			/*
+			 * This drive may have a temperature sensor with a
+			 * thermal zone we can use for thermal control of the
+			 * chassis temperature using the fan.
+			 */
+			drive0: ide-port@0 {
+				reg = <0>;
+				#thermal-sensor-cells = <0>;
+			};
+		};
+
+		display-controller@6a000000 {
+			status = "okay";
+
+			port {
+				display_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-dlink-dns-313.dts b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
new file mode 100644
index 000000000000..138c47e1ac1b
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
@@ -0,0 +1,323 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for D-Link DNS-313 1-Bay Network Storage Enclosure
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	model = "D-Link DNS-313 1-Bay Network Storage Enclosure";
+	compatible = "dlink,dns-313", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB SDRAM in a Nanya NT5DS32M16BS-6K package */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/sda4 rw rootwait";
+		stdout-path = "uart0:19200n8";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-esc {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_ESC>;
+			label = "reset";
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-power {
+			label = "dns313:blue:power";
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-disk-blue {
+			label = "dns313:blue:disk";
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-disk-green {
+			label = "dns313:green:disk";
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-read";
+		};
+		led-disk-red {
+			label = "dns313:red:disk";
+			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "disk-write";
+		};
+	};
+
+	/*
+	 * This is a ADDA AD0405GB-G73 fan @3000 and 6000 RPM.
+	 */
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>,
+			<&gpio0 12 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <3000 1>, <6000 2>;
+		#cooling-cells = <2>;
+	};
+
+	/*
+	 * This is the type B USB connector on the device,
+	 * a GPIO-controlled USB VBUS detect
+	 */
+	usb1_phy: phy {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		#phy-cells = <0>;
+		vbus-gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+	};
+
+	/* Global Mixed-Mode Technology G751 mounted on GPIO I2C */
+	i2c {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio0 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio0 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		g751: temperature-sensor@48 {
+			compatible = "gmt,g751";
+			reg = <0x48>;
+			#thermal-sensor-cells = <0>;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			/* Poll every 20 seconds */
+			polling-delay = <20000>;
+			/* Poll every 2nd second when cooling */
+			polling-delay-passive = <2000>;
+
+			thermal-sensors = <&g751>;
+
+			/* Tripping points from the fan.script in the rootfs */
+			trips {
+				chassis_alert0: chassis-alert0 {
+					/* At 43 degrees turn on low speed */
+					temperature = <43000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_alert1: chassis-alert1 {
+					/* At 47 degrees turn on high speed */
+					temperature = <47000>;
+					hysteresis = <3000>;
+					type = "active";
+				};
+				chassis_crit: chassis-crit {
+					/* Just shut down at 60 degrees */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&chassis_alert0>;
+					cooling-device = <&fan0 1 1>;
+				};
+				map1 {
+					trip = <&chassis_alert1>;
+					cooling-device = <&fan0 2 2>;
+				};
+			};
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Realtek RTL8211B Gigabit ethernet transceiver */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			/*
+			 * This is a Eon EN29LV400AB 512 KiB flash with
+			 * three partitions.
+			 */
+			compatible = "cortina,gemini-flash", "jedec-flash";
+			status = "okay";
+			reg = <0x30000000 0x00080000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/*
+			 * This "RedBoot" is the Storlink derivative.
+			 */
+			partition@0 {
+				label = "RedBoot";
+				reg = <0x00000000 0x00040000>;
+				read-only;
+			};
+			partition@40000 {
+				label = "MTD1";
+				reg = <0x00040000 0x00020000>;
+				read-only;
+			};
+			partition@60000 {
+				label = "MTD2";
+				reg = <0x00060000 0x00020000>;
+				read-only;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups =
+						/* Used by LEDs conflicts ICE */
+						"gpio0bgrp",
+						/* Used by ? conflicts ICE */
+						"gpio0cgrp",
+						/*
+						 * Used by fan & G751, conflicts LPC,
+						 * UART modem lines, SSP
+						 */
+						"gpio0egrp",
+						/* Used by G751 */
+						"gpio0fgrp",
+						/* Used by MDIO */
+						"gpio0igrp";
+					};
+				};
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						/* Used by "reset" button */
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/*
+					 * In the vendor Linux tree, these values are set for the C3
+					 * version of the SL3512 ASIC with the comment "benson suggest"
+					 */
+					conf0 {
+						pins = "R8 GMAC0 RXDV", "U11 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <10>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf3 {
+						pins = "P8 GMAC0 TXEN", "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC", "P10 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					conf6 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf7 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			/* The ROM uses this muxmode */
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+			dr_mode = "peripheral";
+			usb-phy = <&usb1_phy>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-nas4220b.dts b/arch/arm/boot/dts/gemini-nas4220b.dts
new file mode 100644
index 000000000000..6544c730340f
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-nas4220b.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Gemini-based Raidsonic NAS IB-4220-B
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Raidsonic NAS IB-4220-B";
+	compatible = "raidsonic,ib-4220-b", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Backup button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+		};
+		button-restart {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "Softreset button";
+			/* Conflict with TVC */
+			gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-orange-hdd {
+			label = "nas4220b:orange:hdd";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-green-os {
+			label = "nas4220b:green:os";
+			/* Conflict with TVC */
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x7f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+					/* Settings come from OpenWRT, pins on SL3516 */
+					conf0 {
+						pins = "V8 GMAC0 RXDV", "T10 GMAC1 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC", "Y11 GMAC1 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN", "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <11>;
+					};
+					conf4 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 to 16 mA */
+					conf6 {
+						groups = "gmii_gmac0_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-ns2502.dts b/arch/arm/boot/dts/gemini-ns2502.dts
new file mode 100644
index 000000000000..e6eeb35e8819
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ns2502.dts
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for Edimax NS 2502
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "Edimax NS-2502";
+	compatible = "edimax,ns-2502", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii-id";
+		phy-handle = <&phy0>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 8MB of flash */
+	reg = <0x30000000 0x00800000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0x7e0000 */
+		fis-index-block = <0x3f>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <3>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			    mux {
+				    function = "gpio0";
+				    groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
+			    };
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp";
+				};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini-rut1xx.dts b/arch/arm/boot/dts/gemini-rut1xx.dts
new file mode 100644
index 000000000000..0ebda4efd9d0
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-rut1xx.dts
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Teltonika RUT1xx
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Teltonika RUT1xx";
+	compatible = "teltonika,rut1xx", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "Reset to defaults";
+			/* Conflict with TVC */
+			gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-gsm {
+			/* FIXME: add the LED color */
+			label = "rut1xx::gsm";
+			/* Conflict with ICE */
+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+		led-power {
+			/* FIXME: add the LED color */
+			label = "rut1xx::power";
+			/* Conflict with NAND CE0 */
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+			/* TODO: add flash partitions here */
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0bgrp cover line 7 used by GSM LED
+				 * gpio0fgrp cover line 17 used by power LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0bgrp",
+						"gpio0fgrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover line 28-31 otherwise used
+				 * by TVC.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-sl93512r.dts b/arch/arm/boot/dts/gemini-sl93512r.dts
new file mode 100644
index 000000000000..91c19e8ebfe8
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-sl93512r.dts
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for the Storm Semiconductor SL93512R_BRD
+ * Gemini reference design, also initially called
+ * "Gemini324 EV-Board" before Storm acquired Storlink Semiconductor.
+ * The series were later acquired by Cortina Systems.
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Storlink Semiconductor Gemini324 EV-Board / Storm Semiconductor SL93512R_BRD";
+	compatible = "storlink,gemini324", "storm,sl93512r", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 64 MB Samsung K4H511638B */
+		device_type = "memory";
+		reg = <0x00000000 0x4000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 root=/dev/mtdblock3 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-wps {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_WPS_BUTTON>;
+			label = "WPS";
+			/* Conflicts with TVC and extended flash */
+			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+		};
+
+		button-setup {
+			debounce-interval = <50>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-harddisk {
+			label = "sq201:green:harddisk";
+			/* Conflict with LCD (no problem) */
+			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "disk-activity";
+		};
+		led-green-wireless {
+			label = "sq201:green:wireless";
+			/* Conflict with NAND flash CE0 (no problem) */
+			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7385";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0, used by WPS button
+				 * gpio0fgrp cover line 16 used by HD LED
+				 * gpio0ggrp cover line 17, 18 used by wireless LAN LED and
+				 * reset button OR USB ID select on 17 and USB VBUS select
+				 * on 18. (Confusing.)
+				 * gpio0igrp cover line 21, 22 used by MDIO for Marvell PHY
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0fgrp",
+						"gpio0ggrp",
+						"gpio0igrp";
+					};
+				};
+				/*
+				 * gpio1dgrp cover lines used by SPI for
+				 * the Vitesse chip (28-31)
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Control pad skew comes from sl_switch.c in the vendor code */
+					conf0 {
+						pins = "P10 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf1 {
+						pins = "V11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf2 {
+						pins = "T11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf3 {
+						pins = "U11 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf4 {
+						pins = "V7 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf5 {
+						pins = "P8 GMAC0 TXEN";
+						skew-delay = <7>; /* 5 at another place? */
+					};
+					conf6 {
+						pins = "T8 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf7 {
+						pins = "R8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "U8 GMAC0 RXD0", "V8 GMAC0 RXD1",
+						       "P9 GMAC0 RXD2", "R9 GMAC0 RXD3",
+						       "R11 GMAC1 RXD0", "P11 GMAC1 RXD1",
+						       "V12 GMAC1 RXD2", "U12 GMAC1 RXD3",
+						       "R10 GMAC1 TXD0", "T10 GMAC1 TXD1",
+						       "U10 GMAC1 TXD2", "V10 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Appears in sl351x_gmac.c in the vendor code */
+					conf9 {
+						pins = "U7 GMAC0 TXD0", "T7 GMAC0 TXD1",
+						       "R7 GMAC0 TXD2", "P7 GMAC0 TXD3";
+						skew-delay = <5>;
+					};
+				};
+			};
+		};
+
+		/* Both interfaces brought out on SATA connectors */
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		ide@63400000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-sq201.dts b/arch/arm/boot/dts/gemini-sq201.dts
new file mode 100644
index 000000000000..d0efd76695da
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-sq201.dts
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for ITian Square One SQ201 NAS
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "ITian Square One SQ201";
+	compatible = "itian,sq201", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "factory reset";
+			/* Conflict with NAND flash */
+			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		led-green-info {
+			label = "sq201:green:info";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-green-usb {
+			label = "sq201:green:usb";
+			gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			linux,default-trigger = "usb-host";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		/* Uses MDC and MDIO */
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* This is a Marvell 88E1111 ethernet transciever */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Check pin collisions */
+		sck-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		switch@0 {
+			compatible = "vitesse,vsc7395";
+			reg = <0>;
+			/* Specified for 2.5 MHz or below */
+			spi-max-frequency = <2500000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+				port@2 {
+					reg = <2>;
+					label = "lan3";
+				};
+				port@3 {
+					reg = <3>;
+					label = "lan4";
+				};
+				vsc: port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac1>;
+					phy-mode = "rgmii";
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+		};
+	};
+
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			pinctrl-names = "enabled", "disabled";
+			pinctrl-0 = <&pflash_default_pins>;
+			pinctrl-1 = <&pflash_disabled_pins>;
+			/* 16MB of flash */
+			reg = <0x30000000 0x01000000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0xfe0000 */
+				fis-index-block = <0x1fc>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0fgrp cover line 18 used by reset button
+				 * gpio0ggrp cover line 20 used by info LED
+				 * gpio0hgrp cover line 21, 22 used by MDIO for Marvell PHY
+				 * gpio0kgrp cover line 31 used by USB LED
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0fgrp",
+						"gpio0hgrp";
+					};
+				};
+				/*
+				 * gpio0dgrp cover lines used by the SPI
+				 * to the Vitesse G5x chip.
+				 */
+				gpio1_default_pins: pinctrl-gpio1 {
+					mux {
+						function = "gpio1";
+						groups = "gpio1dgrp";
+					};
+				};
+				/*
+				 * These GPIO groups will be mapped in over some
+				 * of the flash pins when the flash is not in
+				 * active use.
+				 */
+				pflash_disabled_pins: pinctrl-pflash-disabled {
+					mux {
+						function = "gpio0";
+						groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+							 "gpio0kgrp";
+					};
+				};
+				pinctrl-gmii {
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+					/* Settings come from memory dump in PLATO */
+					conf0 {
+						pins = "V8 GMAC0 RXDV";
+						skew-delay = <0>;
+					};
+					conf1 {
+						pins = "Y7 GMAC0 RXC";
+						skew-delay = <15>;
+					};
+					conf2 {
+						pins = "T8 GMAC0 TXEN";
+						skew-delay = <7>;
+					};
+					conf3 {
+						pins = "U8 GMAC0 TXC";
+						skew-delay = <10>;
+					};
+					conf4 {
+						pins = "T10 GMAC1 RXDV";
+						skew-delay = <7>;
+					};
+					conf5 {
+						pins = "Y11 GMAC1 RXC";
+						skew-delay = <8>;
+					};
+					conf6 {
+						pins = "W11 GMAC1 TXEN";
+						skew-delay = <7>;
+					};
+					conf7 {
+						pins = "V11 GMAC1 TXC";
+						skew-delay = <5>;
+					};
+					conf8 {
+						/* The data lines all have default skew */
+						pins = "W8 GMAC0 RXD0", "V9 GMAC0 RXD1",
+						       "Y8 GMAC0 RXD2", "U9 GMAC0 RXD3",
+						       "T7 GMAC0 TXD0", "U6 GMAC0 TXD1",
+						       "V7 GMAC0 TXD2", "U7 GMAC0 TXD3",
+						       "Y12 GMAC1 RXD0", "V12 GMAC1 RXD1",
+						       "T11 GMAC1 RXD2", "W12 GMAC1 RXD3",
+						       "U10 GMAC1 TXD0", "Y10 GMAC1 TXD1",
+						       "W10 GMAC1 TXD2", "T9 GMAC1 TXD3";
+						skew-delay = <7>;
+					};
+					/* Set up drive strength on GMAC0 and GMAC1 to 16 mA */
+					conf9 {
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+						drive-strength = <16>;
+					};
+				};
+			};
+		};
+
+		sata: sata@46000000 {
+			cortina,gemini-ata-muxmode = <0>;
+			cortina,gemini-enable-sata-bridge;
+			status = "okay";
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		gpio1: gpio@4e000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio1_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+					pause;
+				};
+			};
+		};
+
+		ide@63000000 {
+			status = "okay";
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-ssi1328.dts b/arch/arm/boot/dts/gemini-ssi1328.dts
new file mode 100644
index 000000000000..42e85f07cf76
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-ssi1328.dts
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
+ * Device Tree file for SSI 1328
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+
+/ {
+	model = "SSI 1328";
+	compatible = "ssi,1328", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
+		stdout-path = &uart0;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* LAN Marvell 88E1118 */
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+		/* WAN ICPlus IP101A */
+		phy1: ethernet-phy@2 {
+			reg = <2>;
+			device_type = "ethernet-phy";
+		};
+	};
+};
+
+&ethernet {
+	status = "okay";
+	ethernet-port@0 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy0>;
+	};
+	ethernet-port@1 {
+		phy-mode = "rgmii";
+		phy-handle = <&phy1>;
+	};
+};
+
+&flash {
+	status = "okay";
+	/* 32MB of flash */
+	reg = <0x30000000 0x03200000>;
+
+	pinctrl-names = "enabled", "disabled";
+	pinctrl-0 = <&pflash_default_pins>;
+	pinctrl-1 = <&pflash_disabled_pins>;
+
+	partitions {
+		compatible = "redboot-fis";
+		/* Eraseblock at 0xfe0000 */
+		fis-index-block = <0x7F>;
+	};
+};
+
+&gpio0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpio0_default_pins>;
+};
+
+&ide0 {
+	status = "okay";
+};
+
+&ide1 {
+	status = "okay";
+};
+
+&sata {
+	cortina,gemini-ata-muxmode = <0>;
+	cortina,gemini-enable-sata-bridge;
+	status = "okay";
+};
+
+&syscon {
+	pinctrl {
+		/*
+		 * gpio0agrp cover line 0-4
+		 * gpio0bgrp cover line 5
+		 */
+		gpio0_default_pins: pinctrl-gpio0 {
+			mux {
+				function = "gpio0";
+				groups = "gpio0agrp", "gpio0bgrp";
+			};
+		};
+		pflash_disabled_pins: pinctrl-pflash-disabled {
+			mux {
+				function = "gpio0";
+				groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
+					 "gpio0kgrp";
+			};
+		};
+		pinctrl-gmii {
+			/* This platform use both the ethernet ports */
+			mux {
+				function = "gmii";
+				groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+			};
+		};
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/gemini-wbd111.dts b/arch/arm/boot/dts/gemini-wbd111.dts
new file mode 100644
index 000000000000..3c88c59ab481
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-wbd111.dts
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-111
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-111";
+	compatible = "wiliboard,wbd111", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		/* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-greeb-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				/* Not used in this platform */
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini-wbd222.dts b/arch/arm/boot/dts/gemini-wbd222.dts
new file mode 100644
index 000000000000..ff72bbc4db3e
--- /dev/null
+++ b/arch/arm/boot/dts/gemini-wbd222.dts
@@ -0,0 +1,154 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Wiliboard WBD-222
+ */
+
+/dts-v1/;
+
+#include "gemini.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Wiliboard WBD-222";
+	compatible = "wiliboard,wbd222", "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 { /* 128 MB */
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-setup {
+			debounce-interval = <100>;
+			wakeup-source;
+			linux,code = <KEY_SETUP>;
+			label = "reset";
+			/* Conflict with ICE */
+			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-red-l3 {
+			label = "wbd111:red:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l4 {
+			label = "wbd111:green:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-red-l4 {
+			label = "wbd111:red:L4";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-green-l3 {
+			label = "wbd111:green:L3";
+			/* Conflict with TVC and extended parallel flash */
+			gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
+			<&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+			device_type = "ethernet-phy";
+		};
+
+		phy1: ethernet-phy@3 {
+			reg = <3>;
+			device_type = "ethernet-phy";
+		};
+	};
+
+	soc {
+		flash@30000000 {
+			status = "okay";
+			/* 8MB of flash */
+			reg = <0x30000000 0x00800000>;
+
+			partitions {
+				compatible = "redboot-fis";
+				/* Eraseblock at 0x7e0000 */
+				fis-index-block = <0x3f>;
+			};
+		};
+
+		syscon: syscon@40000000 {
+			pinctrl {
+				/*
+				 * gpio0agrp cover line 0-4
+				 * gpio0bgrp cover line 5
+				 */
+				gpio0_default_pins: pinctrl-gpio0 {
+					mux {
+						function = "gpio0";
+						groups = "gpio0agrp",
+						"gpio0bgrp";
+					};
+				};
+				pinctrl-gmii {
+					/* This platform use both the ethernet ports */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
+					};
+				};
+			};
+		};
+
+		gpio0: gpio@4d000000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gpio0_default_pins>;
+		};
+
+		pci@50000000 {
+			status = "okay";
+		};
+
+		ethernet@60000000 {
+			status = "okay";
+
+			ethernet-port@0 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy0>;
+			};
+			ethernet-port@1 {
+				phy-mode = "rgmii";
+				phy-handle = <&phy1>;
+			};
+		};
+
+		usb@68000000 {
+			status = "okay";
+		};
+
+		usb@69000000 {
+			status = "okay";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gemini.dtsi b/arch/arm/boot/dts/gemini.dtsi
new file mode 100644
index 000000000000..befe322bd7de
--- /dev/null
+++ b/arch/arm/boot/dts/gemini.dtsi
@@ -0,0 +1,475 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for Cortina systems Gemini SoC
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/cortina,gemini-clock.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		flash: flash@30000000 {
+			compatible = "cortina,gemini-flash", "cfi-flash";
+			syscon = <&syscon>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pflash_default_pins>;
+			bank-width = <2>;
+			status = "disabled";
+		};
+
+		syscon: syscon@40000000 {
+			compatible = "cortina,gemini-syscon",
+				     "syscon", "simple-mfd";
+			reg = <0x40000000 0x1000>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			syscon-reboot {
+				compatible = "syscon-reboot";
+				regmap = <&syscon>;
+				/* GLOBAL_RESET register */
+				offset = <0x0c>;
+				/* RESET_GLOBAL | RESET_CPU1 */
+				mask = <0xC0000000>;
+			};
+
+			pinctrl {
+				compatible = "cortina,gemini-pinctrl";
+				regmap = <&syscon>;
+				/* Hog the DRAM pins */
+				pinctrl-names = "default";
+				pinctrl-0 = <&dram_default_pins>, <&system_default_pins>,
+					    <&vcontrol_default_pins>;
+
+				dram_default_pins: pinctrl-dram {
+					mux {
+						function = "dram";
+						groups = "dramgrp";
+					};
+				};
+				rtc_default_pins: pinctrl-rtc {
+					mux {
+						function = "rtc";
+						groups = "rtcgrp";
+					};
+				};
+				power_default_pins: pinctrl-power {
+					mux {
+						function = "power";
+						groups = "powergrp";
+					};
+				};
+				cir_default_pins: pinctrl-cir {
+					mux {
+						function = "cir";
+						groups = "cirgrp";
+					};
+				};
+				system_default_pins: pinctrl-system {
+					mux {
+						function = "system";
+						groups = "systemgrp";
+					};
+				};
+				vcontrol_default_pins: pinctrl-vcontrol {
+					mux {
+						function = "vcontrol";
+						groups = "vcontrolgrp";
+					};
+				};
+				ice_default_pins: pinctrl-ice {
+					mux {
+						function = "ice";
+						groups = "icegrp";
+					};
+				};
+				uart_default_pins: pinctrl-uart {
+					mux {
+						function = "uart";
+						groups = "uartrxtxgrp";
+					};
+				};
+				pflash_default_pins: pinctrl-pflash {
+					mux {
+						function = "pflash";
+						groups = "pflashgrp";
+					};
+				};
+				usb_default_pins: pinctrl-usb {
+					mux {
+						function = "usb";
+						groups = "usbgrp";
+					};
+				};
+				gmii_default_pins: pinctrl-gmii {
+					/*
+					 * Only activate GMAC0 by default since
+					 * GMAC1 will overlap with 8 GPIO lines
+					 * gpio2a, gpio2b. Overlay groups with
+					 * "gmii_gmac0_grp", "gmii_gmac1_grp" for
+					 * both ethernet interfaces.
+					 */
+					mux {
+						function = "gmii";
+						groups = "gmii_gmac0_grp";
+					};
+				};
+				pci_default_pins: pinctrl-pci {
+					mux {
+						function = "pci";
+						groups = "pcigrp";
+					};
+				};
+				sata_default_pins: pinctrl-sata {
+					mux {
+						function = "sata";
+						groups = "satagrp";
+					};
+				};
+				/* Activate both groups of pins for this state */
+				sata_and_ide_pins: pinctrl-sata-ide {
+					mux0 {
+						function = "sata";
+						groups = "satagrp";
+					};
+					mux1 {
+						function = "ide";
+						groups = "idegrp";
+					};
+				};
+				tvc_default_pins: pinctrl-tvc {
+					mux {
+						function = "tvc";
+						groups = "tvcgrp";
+					};
+				};
+			};
+		};
+
+		watchdog@41000000 {
+			compatible = "cortina,gemini-watchdog", "faraday,ftwdt010";
+			reg = <0x41000000 0x1000>;
+			interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_WDOG>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			clock-names = "PCLK";
+		};
+
+		uart0: serial@42000000 {
+			compatible = "ns16550a";
+			reg = <0x42000000 0x100>;
+			resets = <&syscon GEMINI_RESET_UART>;
+			clocks = <&syscon GEMINI_CLK_UART>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&uart_default_pins>;
+			reg-shift = <2>;
+		};
+
+		timer@43000000 {
+			compatible = "faraday,fttmr010";
+			reg = <0x43000000 0x1000>;
+			interrupt-parent = <&intcon>;
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+			resets = <&syscon GEMINI_RESET_TIMER>;
+			/* APB clock or RTC clock */
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			syscon = <&syscon>;
+		};
+
+		rtc@45000000 {
+			compatible = "cortina,gemini-rtc", "faraday,ftrtc010";
+			reg = <0x45000000 0x100>;
+			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_RTC>;
+			clocks = <&syscon GEMINI_CLK_APB>, <&syscon GEMINI_CLK_RTC>;
+			clock-names = "PCLK", "EXTCLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&rtc_default_pins>;
+		};
+
+		sata: sata@46000000 {
+			compatible = "cortina,gemini-sata-bridge";
+			reg = <0x46000000 0x100>;
+			resets = <&syscon GEMINI_RESET_SATA0>,
+				 <&syscon GEMINI_RESET_SATA1>;
+			reset-names = "sata0", "sata1";
+			clocks = <&syscon GEMINI_CLK_GATE_SATA0>,
+				 <&syscon GEMINI_CLK_GATE_SATA1>;
+			clock-names = "SATA0_PCLK", "SATA1_PCLK";
+			/*
+			 * This defines the special "ide" state that needs
+			 * to be explicitly enabled to enable the IDE pins,
+			 * as these pins are normally used for other things.
+			 */
+			pinctrl-names = "default", "ide";
+			pinctrl-0 = <&sata_default_pins>;
+			pinctrl-1 = <&sata_and_ide_pins>;
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		intcon: interrupt-controller@48000000 {
+			compatible = "faraday,ftintc010";
+			reg = <0x48000000 0x1000>;
+			resets = <&syscon GEMINI_RESET_INTCON0>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		power-controller@4b000000 {
+			compatible = "cortina,gemini-power-controller";
+			reg = <0x4b000000 0x100>;
+			interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&power_default_pins>;
+		};
+
+		gpio0: gpio@4d000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4d000000 0x100>;
+			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO0>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio1: gpio@4e000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4e000000 0x100>;
+			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO1>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		gpio2: gpio@4f000000 {
+			compatible = "cortina,gemini-gpio", "faraday,ftgpio010";
+			reg = <0x4f000000 0x100>;
+			interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_GPIO2>;
+			clocks = <&syscon GEMINI_CLK_APB>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pci@50000000 {
+			compatible = "cortina,gemini-pci", "faraday,ftpci100";
+			/*
+			 * The first 256 bytes in the IO range is actually used
+			 * to configure the host bridge.
+			 */
+			reg = <0x50000000 0x100>;
+			resets = <&syscon GEMINI_RESET_PCI>;
+			clocks = <&syscon GEMINI_CLK_GATE_PCI>, <&syscon GEMINI_CLK_PCI>;
+			clock-names = "PCLK", "PCICLK";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pci_default_pins>;
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			status = "disabled";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+				<0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
+				<0x4800 0 0 2 &pci_intc 1>,
+				<0x4800 0 0 3 &pci_intc 2>,
+				<0x4800 0 0 4 &pci_intc 3>,
+				<0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
+				<0x5000 0 0 2 &pci_intc 2>,
+				<0x5000 0 0 3 &pci_intc 3>,
+				<0x5000 0 0 4 &pci_intc 0>,
+				<0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
+				<0x5800 0 0 2 &pci_intc 3>,
+				<0x5800 0 0 3 &pci_intc 0>,
+				<0x5800 0 0 4 &pci_intc 1>,
+				<0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
+				<0x6000 0 0 2 &pci_intc 0>,
+				<0x6000 0 0 3 &pci_intc 1>,
+				<0x6000 0 0 4 &pci_intc 2>;
+
+			bus-range = <0x00 0xff>;
+			/* PCI ranges mappings */
+			ranges =
+			/* 1MiB I/O space 0x50000000-0x500fffff */
+			<0x01000000 0 0          0x50000000 0 0x00100000>,
+			/* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */
+			<0x02000000 0 0x58000000 0x58000000 0 0x08000000>;
+
+			/* DMA ranges */
+			dma-ranges =
+			/* 128MiB at 0x00000000-0x07ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x08000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>,
+			/* 64MiB at 0x00000000-0x03ffffff */
+			<0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
+
+			/*
+			 * This PCI host bridge variant has a cascaded interrupt
+			 * controller embedded in the host bridge.
+			 */
+			pci_intc: interrupt-controller {
+				interrupt-parent = <&intcon>;
+				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+				#address-cells = <0>;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		ethernet: ethernet@60000000 {
+			compatible = "cortina,gemini-ethernet";
+			reg = <0x60000000 0x4000>, /* Global registers, queue */
+			      <0x60004000 0x2000>, /* V-bit */
+			      <0x60006000 0x2000>; /* A-bit */
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmii_default_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gmac0: ethernet-port@0 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */
+				      <0x6000a000 0x2000>; /* Port 0 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC0>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC0>;
+				clock-names = "PCLK";
+			};
+
+			gmac1: ethernet-port@1 {
+				compatible = "cortina,gemini-ethernet-port";
+				reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */
+				      <0x6000e000 0x2000>; /* Port 1 GMAC */
+				interrupt-parent = <&intcon>;
+				interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				resets = <&syscon GEMINI_RESET_GMAC1>;
+				clocks = <&syscon GEMINI_CLK_GATE_GMAC1>;
+				clock-names = "PCLK";
+			};
+		};
+
+		crypto: crypto@62000000 {
+			compatible = "cortina,sl3516-crypto";
+			reg = <0x62000000 0x10000>;
+			interrupts = <7 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_SECURITY>;
+			clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
+		};
+
+		ide0: ide@63000000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63000000 0x1000>;
+			interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		ide1: ide@63400000 {
+			compatible = "cortina,gemini-pata", "faraday,ftide010";
+			reg = <0x63400000 0x1000>;
+			interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_IDE>;
+			clocks = <&syscon GEMINI_CLK_GATE_IDE>;
+			clock-names = "PCLK";
+			sata = <&sata>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		dma-controller@67000000 {
+			compatible = "faraday,ftdma020", "arm,pl080", "arm,primecell";
+			/* Faraday Technology FTDMAC020 variant */
+			arm,primecell-periphid = <0x0003b080>;
+			reg = <0x67000000 0x1000>;
+			interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_DMAC>;
+			clocks = <&syscon GEMINI_CLK_AHB>;
+			clock-names = "apb_pclk";
+			/* Bus interface AHB1 (AHB0) is totally tilted */
+			lli-bus-interface-ahb2;
+			mem-bus-interface-ahb2;
+			memcpy-burst-size = <256>;
+			memcpy-bus-width = <32>;
+			#dma-cells = <2>;
+		};
+
+		display-controller@6a000000 {
+			compatible = "cortina,gemini-tvc", "faraday,tve200";
+			reg = <0x6a000000 0x1000>;
+			interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+			resets = <&syscon GEMINI_RESET_TVC>;
+			clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+				 <&syscon GEMINI_CLK_TVC>;
+			clock-names = "PCLK", "TVE";
+			pinctrl-names = "default";
+			pinctrl-0 = <&tvc_default_pins>;
+			status = "disabled";
+		};
+
+		usb0: usb@68000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
+			reg = <0x68000000 0x1000>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB0>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB0>;
+			clock-names = "PCLK";
+			/*
+			 * This will claim pins for USB0 and USB1 at the same
+			 * time as they are using some common pins. If you for
+			 * some reason have a system using USB1 at 96000000 but
+			 * NOT using USB0 at 68000000 you wll have to add the
+			 * usb_default_pins to the USB controller at 96000000
+			 * in your .dts for the board.
+			 */
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb_default_pins>;
+			/* Default to host mode */
+			dr_mode = "host";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+
+		usb1: usb@69000000 {
+			compatible = "cortina,gemini-usb", "faraday,fotg200";
+			reg = <0x69000000 0x1000>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&syscon GEMINI_RESET_USB1>;
+			clocks = <&syscon GEMINI_CLK_GATE_USB1>;
+			clock-names = "PCLK";
+			syscon = <&syscon>;
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
new file mode 100644
index 000000000000..8d77579807ec
--- /dev/null
+++ b/arch/arm/boot/dts/gr-peach-audiocamerashield.dtsi
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the GR-Peach audiocamera shield expansion board
+ *
+ * Copyright (C) 2017 Jacopo Mondi <jacopo+renesas@jmondi.org>
+ */
+
+#include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
+
+/ {
+	/* On-board camera clock. */
+	camera_clk: camera_clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+};
+
+&pinctrl {
+	i2c1_pins: i2c1 {
+		/* P1_2 as SCL; P1_3 as SDA */
+		pinmux = <RZA1_PINMUX(1, 2, 1)>, <RZA1_PINMUX(1, 3, 1)>;
+	};
+
+	vio_pins: vio {
+		/* CEU pins: VIO_D[0-10], VIO_VD, VIO_HD, VIO_CLK */
+		pinmux = <RZA1_PINMUX(1, 0, 5)>, /* VIO_VD */
+			 <RZA1_PINMUX(1, 1, 5)>, /* VIO_HD */
+			 <RZA1_PINMUX(2, 0, 7)>, /* VIO_D0 */
+			 <RZA1_PINMUX(2, 1, 7)>, /* VIO_D1 */
+			 <RZA1_PINMUX(2, 2, 7)>, /* VIO_D2 */
+			 <RZA1_PINMUX(2, 3, 7)>, /* VIO_D3 */
+			 <RZA1_PINMUX(2, 4, 7)>, /* VIO_D4 */
+			 <RZA1_PINMUX(2, 5, 7)>, /* VIO_D5 */
+			 <RZA1_PINMUX(2, 6, 7)>, /* VIO_D6 */
+			 <RZA1_PINMUX(2, 7, 7)>, /* VIO_D7 */
+			 <RZA1_PINMUX(10, 0, 6)>; /* VIO_CLK */
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+
+	status = "okay";
+	clock-frequency = <100000>;
+
+	camera@48 {
+		compatible = "aptina,mt9v111";
+		reg = <0x48>;
+
+		clocks = <&camera_clk>;
+
+		port {
+			mt9v111_out: endpoint {
+				remote-endpoint = <&ceu_in>;
+			};
+		};
+	};
+};
+
+&ceu {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vio_pins>;
+
+	status = "okay";
+
+	port {
+		ceu_in: endpoint {
+			remote-endpoint = <&mt9v111_out>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
new file mode 100644
index 000000000000..f473fa22e9ce
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519-demb.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+/dts-v1/;
+#include "hi3519.dtsi"
+
+/ {
+	model = "HiSilicon HI3519 DEMO Board";
+	compatible = "hisilicon,hi3519";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x40000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&dual_timer0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
new file mode 100644
index 000000000000..c524c854d319
--- /dev/null
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
+ */
+
+#include <dt-bindings/clock/hi3519-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0>;
+		};
+	};
+
+	gic: interrupt-controller@10300000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
+	};
+
+	clk_3m: clk_3m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <3000000>;
+	};
+
+	crg: clock-reset-controller@12010000 {
+		compatible = "hisilicon,hi3519-crg";
+		#clock-cells = <1>;
+		#reset-cells = <2>;
+		reg = <0x12010000 0x10000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		uart0: serial@12100000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12100000 0x1000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart1: serial@12101000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12101000 0x1000>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart2: serial@12102000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12102000 0x1000>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart3: serial@12103000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12103000 0x1000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		uart4: serial@12104000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12104000 0x1000>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer0: timer@12000000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12000000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer1: timer@12001000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12001000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		dual_timer2: timer@12002000 {
+			compatible = "arm,sp804", "arm,primecell";
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x12002000 0x1000>;
+			clocks = <&clk_3m>;
+			clock-names = "apb_pclk";
+			status = "disable";
+		};
+
+		spi_bus0: spi@12120000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12120000 0x1000>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus1: spi@12121000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12121000 0x1000>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		spi_bus2: spi@12122000 {
+			compatible = "arm,pl022", "arm,primecell";
+			reg = <0x12122000 0x1000>;
+			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>;
+			clock-names = "sspclk", "apb_pclk";
+			num-cs = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disable";
+		};
+
+		sysctrl: system-controller@12020000 {
+			compatible = "hisilicon,hi3519-sysctrl", "syscon";
+			reg = <0x12020000 0x1000>;
+		};
+
+		reboot {
+			compatible = "syscon-reboot";
+			regmap = <&sysctrl>;
+			offset = <0x4>;
+			mask = <0xdeadbeef>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index fe623928f687..d7f5daecc9dc 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2012-2013 Linaro Ltd.
  *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
  */
 
 /dts-v1/;
@@ -16,52 +13,53 @@
 	compatible = "hisilicon,hi3620-hi4511";
 
 	chosen {
-		bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+		bootargs = "root=/dev/ram0";
+		stdout-path = "serial0:115200n8";
 	};
 
-	memory {
+	memory@40000000 {
 		device_type = "memory";
 		reg = <0x40000000 0x20000000>;
 	};
 
-	amba {
+	amba-bus {
 		dual_timer0: dual_timer@800000 {
-			status = "ok";
+			status = "okay";
 		};
 
-		uart0: uart@b00000 {	/* console */
-			pinctrl-names = "default", "idle";
+		uart0: serial@b00000 {	/* console */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart1: uart@b01000 { /* modem */
-			pinctrl-names = "default", "idle";
+		uart1: serial@b01000 { /* modem */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart2: uart@b02000 { /* audience */
-			pinctrl-names = "default", "idle";
+		uart2: serial@b02000 { /* audience */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart3: uart@b03000 {
-			pinctrl-names = "default", "idle";
+		uart3: serial@b03000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
-			status = "ok";
+			status = "okay";
 		};
 
-		uart4: uart@b04000 {
-			pinctrl-names = "default", "idle";
+		uart4: serial@b04000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pmx0: pinmux@803000 {
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 6cbb62e5c6a9..cf48ec14af43 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -1,20 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. Hi3620 SoC
+ * HiSilicon Ltd. Hi3620 SoC
  *
- * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 HiSilicon Ltd.
  * Copyright (C) 2012-2013 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/hi3620-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart0;
 		serial1 = &uart1;
@@ -64,15 +63,15 @@
 		};
 	};
 
-	amba {
+	amba-bus {
 
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "arm,amba-bus";
+		compatible = "simple-bus";
 		interrupt-parent = <&gic>;
 		ranges = <0 0xfc000000 0x2000000>;
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x100000 0x100000>;
 			interrupts = <0 15 4>;
@@ -90,7 +89,7 @@
 		};
 
 		sysctrl: system-controller@802000 {
-			compatible = "hisilicon,sysctrl";
+			compatible = "hisilicon,sysctrl", "syscon";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0 0x802000 0x1000>;
@@ -112,8 +111,10 @@
 			reg = <0x800000 0x1000>;
 			/* timer00 & timer01 */
 			interrupts = <0 0 4>, <0 1 4>;
-			clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER0_MUX>,
+				 <&clock HI3620_TIMER1_MUX>,
+				 <&clock HI3620_TIMER0_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -122,8 +123,10 @@
 			reg = <0x801000 0x1000>;
 			/* timer10 & timer11 */
 			interrupts = <0 2 4>, <0 3 4>;
-			clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER2_MUX>,
+				 <&clock HI3620_TIMER3_MUX>,
+				 <&clock HI3620_TIMER2_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -132,8 +135,10 @@
 			reg = <0xa01000 0x1000>;
 			/* timer20 & timer21 */
 			interrupts = <0 4 4>, <0 5 4>;
-			clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER4_MUX>,
+				 <&clock HI3620_TIMER5_MUX>,
+				 <&clock HI3620_TIMER4_MUX>;
+			clock-names = "timer0lck", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -142,8 +147,10 @@
 			reg = <0xa02000 0x1000>;
 			/* timer30 & timer31 */
 			interrupts = <0 6 4>, <0 7 4>;
-			clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER6_MUX>,
+				 <&clock HI3620_TIMER7_MUX>,
+				 <&clock HI3620_TIMER6_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -152,8 +159,10 @@
 			reg = <0xa03000 0x1000>;
 			/* timer40 & timer41 */
 			interrupts = <0 96 4>, <0 97 4>;
-			clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_TIMER8_MUX>,
+				 <&clock HI3620_TIMER9_MUX>,
+				 <&clock HI3620_TIMER8_MUX>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -163,48 +172,48 @@
 			interrupts = <1 13 0xf01>;
 		};
 
-		uart0: uart@b00000 {
+		uart0: serial@b00000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb00000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&clock HI3620_UARTCLK0>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart1: uart@b01000 {
+		uart1: serial@b01000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb01000 0x1000>;
 			interrupts = <0 21 4>;
-			clocks = <&clock HI3620_UARTCLK1>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart2: uart@b02000 {
+		uart2: serial@b02000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb02000 0x1000>;
 			interrupts = <0 22 4>;
-			clocks = <&clock HI3620_UARTCLK2>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart3: uart@b03000 {
+		uart3: serial@b03000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb03000 0x1000>;
 			interrupts = <0 23 4>;
-			clocks = <&clock HI3620_UARTCLK3>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart4: uart@b04000 {
+		uart4: serial@b04000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb04000 0x1000>;
 			interrupts = <0 24 4>;
-			clocks = <&clock HI3620_UARTCLK4>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
@@ -537,6 +546,7 @@
 			reg = <0x803000 0x188>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			#gpio-range-cells = <3>;
 			ranges;
 
@@ -558,6 +568,7 @@
 			reg = <0x803800 0x2dc>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+			#pinctrl-cells = <1>;
 			ranges;
 
 			pinctrl-single,register-width = <32>;
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index ed14aeac0566..b6b0225a769e 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /dts-v1/;
@@ -24,7 +13,6 @@
 	compatible = "calxeda,highbank";
 	#address-cells = <1>;
 	#size-cells = <1>;
-	clock-ranges;
 
 	cpus {
 		#address-cells = <1>;
@@ -56,6 +44,16 @@
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
 		};
 
 		cpu@902 {
@@ -65,6 +63,16 @@
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
 		};
 
 		cpu@903 {
@@ -74,10 +82,20 @@
 			next-level-cache = <&L2>;
 			clocks = <&a9pll>;
 			clock-names = "cpu";
+			operating-points = <
+				/* kHz    ignored */
+				 1300000  1000000
+				 1200000  1000000
+				 1100000  1000000
+				  800000  1000000
+				  400000  1000000
+				  200000  1000000
+			>;
+			clock-latency = <100000>;
 		};
 	};
 
-	memory {
+	memory@0 {
 		name = "memory";
 		device_type = "memory";
 		reg = <0x00000000 0xff900000>;
@@ -109,14 +127,12 @@
 		intc: interrupt-controller@fff11000 {
 			compatible = "arm,cortex-a9-gic";
 			#interrupt-cells = <3>;
-			#size-cells = <0>;
-			#address-cells = <1>;
 			interrupt-controller;
 			reg = <0xfff11000 0x1000>,
 			      <0xfff10100 0x100>;
 		};
 
-		L2: l2-cache {
+		L2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0xfff12000 0x1000>;
 			interrupts = <0 70 4>;
@@ -126,14 +142,14 @@
 
 		pmu {
 			compatible = "arm,cortex-a9-pmu";
-			interrupts = <0 76 4  0 75 4  0 74 4  0 73 4>;
+			interrupts = <0 76 4>, <0 75 4>, <0 74 4>, <0 73 4>;
 		};
 
 
 		sregs@fff3c200 {
 			compatible = "calxeda,hb-sregs-l2-ecc";
 			reg = <0xfff3c200 0x100>;
-			interrupts = <0 71 4  0 72 4>;
+			interrupts = <0 71 4>, <0 72 4>;
 		};
 
 	};
diff --git a/arch/arm/boot/dts/hip01-ca9x2.dts b/arch/arm/boot/dts/hip01-ca9x2.dts
index eca5e42770fe..f3faf247cd61 100644
--- a/arch/arm/boot/dts/hip01-ca9x2.dts
+++ b/arch/arm/boot/dts/hip01-ca9x2.dts
@@ -1,14 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
  *
- * Copyright (C) 2014 Hisilicon Ltd.
+ * Copyright (C) 2014 HiSilicon Ltd.
  * Copyright (C) 2014 Huawei Ltd.
  *
  * Author: Wang Long <long.wanglong@huawei.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 /dts-v1/;
@@ -40,7 +37,7 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
 		device_type = "memory";
 		reg = <0x80000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 33130f8461c3..e17f36bd9006 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -1,18 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP01 SoC
+ * HiSilicon Ltd. HiP01 SoC
  *
- * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 HiSilicon Ltd.
  * Copyright (c) 2014 Huawei Ltd.
  *
  * Author: Wang Long <long.wanglong@huawei.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
-#include "skeleton.dtsi"
-
 / {
 	interrupt-parent = <&gic>;
 	#address-cells = <1>;
@@ -40,47 +35,47 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0x10000000 0x20000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
-			uart0: uart@10001000 {
+			uart0: serial@10001000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10001000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 32 4>;
 				status = "disabled";
 			};
 
-			uart1: uart@10002000 {
+			uart1: serial@10002000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10002000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 33 4>;
 				status = "disabled";
 			};
 
-			uart2: uart@10003000 {
+			uart2: serial@10003000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10003000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 34 4>;
 				status = "disabled";
 			};
 
-			uart3: uart@10006000 {
+			uart3: serial@10006000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10006000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 4 4>;
 				status = "disabled";
@@ -93,14 +88,14 @@
 			reboot-offset = <0x4>;
 		};
 
-		global_timer@0a000200 {
+		global_timer@a000200 {
 			compatible = "arm,cortex-a9-global-timer";
 			reg = <0x0a000200 0x100>;
 			interrupts = <1 11 0xf04>;
 			clocks = <&hisi_refclk144mhz>;
 		};
 
-		local_timer@0a000600 {
+		local_timer@a000600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x0a000600 0x100>;
 			interrupts = <1 13 0xf04>;
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index 40a9e33c2654..0210064bf6a5 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2013-2014 Linaro Ltd.
  *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
  */
 
 /dts-v1/;
@@ -18,15 +15,15 @@
 	model = "Hisilicon D01 Development Board";
 	compatible = "hisilicon,hip04-d01";
 
-	memory@00000000,10000000 {
+	memory@0,10000000 {
 		device_type = "memory";
 		reg = <0x00000000 0x10000000 0x00000000 0xc0000000>,
 		      <0x00000004 0xc0000000 0x00000003 0x40000000>;
 	};
 
 	soc {
-		uart0: uart@4007000 {
-			status = "ok";
+		uart0: serial@4007000 {
+			status = "okay";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f275115..2424cc545c9c 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -1,14 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
- * Hisilicon Ltd. HiP04 SoC
+ * HiSilicon Ltd. HiP04 SoC
  *
- * Copyright (C) 2013-2014 Hisilicon Ltd.
+ * Copyright (C) 2013-2014 HiSilicon Ltd.
  * Copyright (C) 2013-2014 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
  */
 
 / {
@@ -216,7 +213,7 @@
 		};
 
 		sysctrl: sysctrl {
-			compatible = "hisilicon,sysctrl";
+			compatible = "hisilicon,sysctrl", "syscon";
 			reg = <0x3e00000 0x00100000>;
 		};
 
@@ -229,8 +226,8 @@
 			compatible = "arm,sp804", "arm,primecell";
 			reg = <0x3000000 0x1000>;
 			interrupts = <0 224 4>;
-			clocks = <&clk_50m>, <&clk_50m>;
-			clock-names = "apb_pclk";
+			clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>;
+			clock-names = "timer0clk", "timer1clk", "apb_pclk";
 		};
 
 		arm-pmu {
@@ -253,12 +250,12 @@
 				     <0 79 4>;
 		};
 
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x4007000 0x1000>;
 			interrupts = <0 381 4>;
-			clocks = <&clk_168m>;
-			clock-names = "uartclk";
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			status = "disabled";
 		};
@@ -277,10 +274,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb0_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator0_out_port0>;
+		in-ports {
+			port {
+				etb0_in_port: endpoint@0 {
+					remote-endpoint = <&replicator0_out_port0>;
+				};
 			};
 		};
 	};
@@ -291,10 +289,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb1_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator1_out_port0>;
+		in-ports {
+			port {
+				etb1_in_port: endpoint@0 {
+					remote-endpoint = <&replicator1_out_port0>;
+				};
 			};
 		};
 	};
@@ -305,10 +304,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb2_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator2_out_port0>;
+		in-ports {
+			port {
+				etb2_in_port: endpoint@0 {
+					remote-endpoint = <&replicator2_out_port0>;
+				};
 			};
 		};
 	};
@@ -319,10 +319,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			etb3_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&replicator3_out_port0>;
+		in-ports {
+			port {
+				etb3_in_port: endpoint@0 {
+					remote-endpoint = <&replicator3_out_port0>;
+				};
 			};
 		};
 	};
@@ -333,10 +334,11 @@
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		port {
-			tpiu_in_port: endpoint@0 {
-				slave-mode;
-				remote-endpoint = <&funnel4_out_port0>;
+		in-ports {
+			port {
+				tpiu_in_port: endpoint@0 {
+					remote-endpoint = <&funnel4_out_port0>;
+				};
 			};
 		};
 	};
@@ -345,9 +347,9 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -365,12 +367,11 @@
 					remote-endpoint = <&funnel4_in_port0>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator0_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel0_out_port0>;
 				};
 			};
@@ -381,9 +382,9 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
@@ -401,12 +402,11 @@
 					remote-endpoint = <&funnel4_in_port1>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator1_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel1_out_port0>;
 				};
 			};
@@ -417,13 +417,12 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			/* replicator output ports */
 			port@0 {
 				reg = <0>;
 				replicator2_out_port0: endpoint {
@@ -437,12 +436,11 @@
 					remote-endpoint = <&funnel4_in_port2>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator2_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel2_out_port0>;
 				};
 			};
@@ -453,13 +451,12 @@
 		/* non-configurable replicators don't show up on the
 		 * AMBA bus.  As such no need to add "arm,primecell".
 		 */
-		compatible = "arm,coresight-replicator";
+		compatible = "arm,coresight-static-replicator";
 
-		ports {
+		out-ports {
 			#address-cells = <1>;
 			#size-cells = <0>;
 
-			/* replicator output ports */
 			port@0 {
 				reg = <0>;
 				replicator3_out_port0: endpoint {
@@ -473,12 +470,11 @@
 					remote-endpoint = <&funnel4_in_port3>;
 				};
 			};
+		};
 
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
+		in-ports {
+			port {
 				replicator3_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&funnel3_out_port0>;
 				};
 			};
@@ -486,53 +482,48 @@
 	};
 
 	funnel@0,e3c41000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3c41000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel0_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator0_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel0_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm0_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel0_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm1_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel0_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm2_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel0_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm3_out_port>;
 				};
 			};
@@ -540,53 +531,48 @@
 	};
 
 	funnel@0,e3c81000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3c81000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel1_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator1_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel1_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm4_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel1_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm5_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel1_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm6_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel1_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm7_out_port>;
 				};
 			};
@@ -594,53 +580,48 @@
 	};
 
 	funnel@0,e3cc1000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3cc1000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel2_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator2_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel2_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm8_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel2_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm9_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel2_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm10_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel2_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm11_out_port>;
 				};
 			};
@@ -648,53 +629,48 @@
 	};
 
 	funnel@0,e3d01000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3d01000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel3_out_port0: endpoint {
 					remote-endpoint =
 						<&replicator3_in_port0>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel3_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm12_out_port>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel3_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm13_out_port>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel3_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm14_out_port>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel3_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint = <&ptm15_out_port>;
 				};
 			};
@@ -702,55 +678,50 @@
 	};
 
 	funnel@0,e3c04000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
+		compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
 		reg = <0 0xe3c04000 0 0x1000>;
 
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel output port */
-			port@0 {
-				reg = <0>;
+		out-ports {
+			port {
 				funnel4_out_port0: endpoint {
 					remote-endpoint = <&tpiu_in_port>;
 				};
 			};
+		};
 
-			/* funnel input ports */
-			port@1 {
+		in-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
 				reg = <0>;
 				funnel4_in_port0: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator0_out_port1>;
 				};
 			};
 
-			port@2 {
+			port@1 {
 				reg = <1>;
 				funnel4_in_port1: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator1_out_port1>;
 				};
 			};
 
-			port@3 {
+			port@2 {
 				reg = <2>;
 				funnel4_in_port2: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator2_out_port1>;
 				};
 			};
 
-			port@4 {
+			port@3 {
 				reg = <3>;
 				funnel4_in_port3: endpoint {
-					slave-mode;
 					remote-endpoint =
 						<&replicator3_out_port1>;
 				};
@@ -765,9 +736,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU0>;
-		port {
-			ptm0_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port0>;
+		out-ports {
+			port {
+				ptm0_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port0>;
+				};
 			};
 		};
 	};
@@ -779,9 +752,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU1>;
-		port {
-			ptm1_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port1>;
+		out-ports {
+			port {
+				ptm1_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port1>;
+				};
 			};
 		};
 	};
@@ -793,9 +768,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU2>;
-		port {
-			ptm2_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port2>;
+		out-ports {
+			port {
+				ptm2_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port2>;
+				};
 			};
 		};
 	};
@@ -807,9 +784,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU3>;
-		port {
-			ptm3_out_port: endpoint {
-				remote-endpoint = <&funnel0_in_port3>;
+		out-ports {
+			port {
+				ptm3_out_port: endpoint {
+					remote-endpoint = <&funnel0_in_port3>;
+				};
 			};
 		};
 	};
@@ -821,9 +800,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU4>;
-		port {
-			ptm4_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port0>;
+		out-ports {
+			port {
+				ptm4_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port0>;
+				};
 			};
 		};
 	};
@@ -835,9 +816,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU5>;
-		port {
-			ptm5_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port1>;
+		out-ports {
+			port {
+				ptm5_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port1>;
+				};
 			};
 		};
 	};
@@ -849,9 +832,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU6>;
-		port {
-			ptm6_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port2>;
+		out-ports {
+			port {
+				ptm6_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port2>;
+				};
 			};
 		};
 	};
@@ -863,9 +848,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU7>;
-		port {
-			ptm7_out_port: endpoint {
-				remote-endpoint = <&funnel1_in_port3>;
+		out-ports {
+			port {
+				ptm7_out_port: endpoint {
+					remote-endpoint = <&funnel1_in_port3>;
+				};
 			};
 		};
 	};
@@ -877,9 +864,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU8>;
-		port {
-			ptm8_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port0>;
+		out-ports {
+			port {
+				ptm8_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port0>;
+				};
 			};
 		};
 	};
@@ -890,9 +879,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU9>;
-		port {
-			ptm9_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port1>;
+		out-ports {
+			port {
+				ptm9_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port1>;
+				};
 			};
 		};
 	};
@@ -904,9 +895,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU10>;
-		port {
-			ptm10_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port2>;
+		out-ports {
+			port {
+				ptm10_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port2>;
+				};
 			};
 		};
 	};
@@ -918,9 +911,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU11>;
-		port {
-			ptm11_out_port: endpoint {
-				remote-endpoint = <&funnel2_in_port3>;
+		out-ports {
+			port {
+				ptm11_out_port: endpoint {
+					remote-endpoint = <&funnel2_in_port3>;
+				};
 			};
 		};
 	};
@@ -932,9 +927,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU12>;
-		port {
-			ptm12_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port0>;
+		out-ports {
+			port {
+				ptm12_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port0>;
+				};
 			};
 		};
 	};
@@ -946,9 +943,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU13>;
-		port {
-			ptm13_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port1>;
+		out-ports {
+			port {
+				ptm13_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port1>;
+				};
 			};
 		};
 	};
@@ -960,9 +959,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU14>;
-		port {
-			ptm14_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port2>;
+		out-ports {
+			port {
+				ptm14_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port2>;
+				};
 			};
 		};
 	};
@@ -974,9 +975,11 @@
 		clocks = <&clk_375m>;
 		clock-names = "apb_pclk";
 		cpu = <&CPU15>;
-		port {
-			ptm15_out_port: endpoint {
-				remote-endpoint = <&funnel3_in_port3>;
+		out-ports {
+			port {
+				ptm15_out_port: endpoint {
+					remote-endpoint = <&funnel3_in_port3>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
index 721b09238f58..7758c19038f0 100644
--- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
+++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts
@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
 /dts-v1/;
@@ -15,7 +12,7 @@
 	compatible = "hisilicon,hix5hd2";
 
 	chosen {
-		bootargs = "console=ttyAMA0,115200 earlyprintk";
+		stdout-path = "serial0:115200n8";
 	};
 
 	cpus {
@@ -38,7 +35,7 @@
 		};
 	};
 
-	memory {
+	memory@0 {
 		device_type = "memory";
 		reg = <0x00000000 0x80000000>;
 	};
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index c52722b14e4a..dc991ba2a9fb 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -1,16 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2013-2014 Linaro Ltd.
- * Copyright (c) 2013-2014 Hisilicon Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
+ * Copyright (c) 2013-2014 HiSilicon Limited.
  */
 
-#include "skeleton.dtsi"
 #include <dt-bindings/clock/hix5hd2-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	aliases {
 		serial0 = &uart0;
 	};
@@ -31,13 +30,13 @@
 		interrupt-parent = <&gic>;
 		ranges = <0 0xf8000000 0x8000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "arm,amba-bus";
+			compatible = "simple-bus";
 			ranges;
 
-			timer0: timer@00002000 {
+			timer0: timer@2000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00002000 0x1000>;
 				/* timer00 & timer01 */
@@ -46,7 +45,7 @@
 				status = "disabled";
 			};
 
-			timer1: timer@00a29000 {
+			timer1: timer@a29000 {
 				/*
 				 * Only used in NORMAL state, not available ins
 				 * SLOW or DOZE state.
@@ -60,7 +59,7 @@
 				status = "disabled";
 			};
 
-			timer2: timer@00a2a000 {
+			timer2: timer@a2a000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00a2a000 0x1000>;
 				/* timer20 & timer21 */
@@ -69,7 +68,7 @@
 				status = "disabled";
 			};
 
-			timer3: timer@00a2b000 {
+			timer3: timer@a2b000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00a2b000 0x1000>;
 				/* timer30 & timer31 */
@@ -78,7 +77,7 @@
 				status = "disabled";
 			};
 
-			timer4: timer@00a81000 {
+			timer4: timer@a81000 {
 				compatible = "arm,sp804", "arm,primecell";
 				reg = <0x00a81000 0x1000>;
 				/* timer30 & timer31 */
@@ -87,48 +86,48 @@
 				status = "disabled";
 			};
 
-			uart0: uart@00b00000 {
+			uart0: serial@b00000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b00000 0x1000>;
 				interrupts = <0 49 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart1: uart@00006000 {
+			uart1: serial@6000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00006000 0x1000>;
 				interrupts = <0 50 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart2: uart@00b02000 {
+			uart2: serial@b02000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b02000 0x1000>;
 				interrupts = <0 51 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart3: uart@00b03000 {
+			uart3: serial@b03000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b03000 0x1000>;
 				interrupts = <0 52 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart4: uart@00b04000 {
+			uart4: serial@b04000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb04000 0x1000>;
 				interrupts = <0 53 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
@@ -197,7 +196,7 @@
 				status = "disabled";
 			};
 
-			gpio5: gpio@004000 {
+			gpio5: gpio@4000 {
 				compatible = "arm,pl061", "arm,primecell";
 				reg = <0x004000 0x1000>;
 				interrupts = <0 113 0x4>;
@@ -371,18 +370,19 @@
 				arm,primecell-periphid = <0x00141805>;
 				reg = <0xa2c000 0x1000>;
 				interrupts = <0 29 4>;
-				clocks = <&clock HIX5HD2_WDG0_RST>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_WDG0_RST>,
+					 <&clock HIX5HD2_WDG0_RST>;
+				clock-names = "wdog_clk", "apb_pclk";
 			};
 		};
 
-		local_timer@00a00600 {
+		local_timer@a00600 {
 			compatible = "arm,cortex-a9-twd-timer";
 			reg = <0x00a00600 0x20>;
 			interrupts = <1 13 0xf01>;
 		};
 
-		l2: l2-cache {
+		l2: cache-controller {
 			compatible = "arm,pl310-cache";
 			reg = <0x00a10000 0x100000>;
 			interrupts = <0 15 4>;
@@ -390,7 +390,7 @@
 			cache-level = <2>;
 		};
 
-		sysctrl: system-controller@00000000 {
+		sysctrl: system-controller@0 {
 			compatible = "hisilicon,sysctrl", "syscon";
 			reg = <0x00000000 0x1000>;
 		};
@@ -402,7 +402,7 @@
 			mask = <0xdeadbeef>;
 		};
 
-		cpuctrl@00a22000 {
+		cpuctrl@a22000 {
 			compatible = "hisilicon,cpuctrl";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -423,7 +423,7 @@
 			interrupts = <0 35 4>;
 			clocks = <&clock HIX5HD2_MMC_CIU_RST>,
 				 <&clock HIX5HD2_MMC_BIU_CLK>;
-			clock-names = "ciu", "biu";
+			clock-names = "biu", "ciu";
 		};
 
 		sd: mmc@1820000 {
@@ -432,33 +432,35 @@
 			interrupts = <0 34 4>;
 			clocks = <&clock HIX5HD2_SD_CIU_RST>,
 				 <&clock HIX5HD2_SD_BIU_CLK>;
-			clock-names = "ciu","biu";
+			clock-names = "biu", "ciu";
 		};
 
 		gmac0: ethernet@1840000 {
-			compatible = "hisilicon,hix5hd2-gmac";
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
 			reg = <0x1840000 0x1000>,<0x184300c 0x4>;
 			interrupts = <0 71 4>;
 			clocks = <&clock HIX5HD2_MAC0_CLK>;
+			clock-names = "mac_core";
 			status = "disabled";
 		};
 
 		gmac1: ethernet@1841000 {
-			compatible = "hisilicon,hix5hd2-gmac";
+			compatible = "hisilicon,hix5hd2-gmac", "hisilicon,hisi-gmac-v1";
 			reg = <0x1841000 0x1000>,<0x1843010 0x4>;
 			interrupts = <0 72 4>;
 			clocks = <&clock HIX5HD2_MAC1_CLK>;
+			clock-names = "mac_core";
 			status = "disabled";
 		};
 
-		usb0: ehci@1890000 {
+		usb0: usb@1890000 {
 			compatible = "generic-ehci";
 			reg = <0x1890000 0x1000>;
 			interrupts = <0 66 4>;
 			clocks = <&clock HIX5HD2_USB_CLK>;
 		};
 
-		usb1: ohci@1880000 {
+		usb1: usb@1880000 {
 			compatible = "generic-ohci";
 			reg = <0x1880000 0x1000>;
 			interrupts = <0 67 4>;
@@ -466,7 +468,7 @@
 		};
 
 		peripheral_ctrl: syscon@a20000 {
-			compatible = "syscon";
+			compatible = "hisilicon,peri-subctrl", "syscon";
 			reg = <0xa20000 0x1000>;
 		};
 
@@ -485,7 +487,7 @@
 			clocks = <&clock HIX5HD2_SATA_CLK>;
 		};
 
-		ir: ir@001000 {
+		ir: ir@1000 {
 			compatible = "hisilicon,hix5hd2-ir";
 			reg = <0x001000 0x1000>;
 			interrupts = <0 47 4>;
diff --git a/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
new file mode 100644
index 000000000000..3a7382ce40ef
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-bmc-dl360gen10.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE DL360Gen10
+ */
+
+/include/ "hpe-gxp.dtsi"
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "hpe,gxp-dl360gen10", "hpe,gxp";
+	model = "Hewlett Packard Enterprise ProLiant dl360 Gen10";
+
+	aliases {
+		serial0 = &uartc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/hpe-gxp.dtsi b/arch/arm/boot/dts/hpe-gxp.dtsi
new file mode 100644
index 000000000000..cf735b3c4f35
--- /dev/null
+++ b/arch/arm/boot/dts/hpe-gxp.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree file for HPE GXP
+ */
+
+/dts-v1/;
+/ {
+	model = "Hewlett Packard Enterprise GXP BMC";
+	compatible = "hpe,gxp";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a9";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L2>;
+		};
+	};
+
+	clocks {
+		pll: clock-0 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <1600000000>;
+		};
+
+		iopclk: clock-1 {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clock-div = <4>;
+			clock-mult = <1>;
+			clocks = <&pll>;
+		};
+	};
+
+	axi {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		dma-ranges;
+
+		L2: cache-controller@b0040000 {
+			compatible = "arm,pl310-cache";
+			reg = <0xb0040000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		ahb@c0000000 {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0xc0000000 0x30000000>;
+			dma-ranges;
+
+			vic0: interrupt-controller@eff0000 {
+				compatible = "arm,pl192-vic";
+				reg = <0xeff0000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			vic1: interrupt-controller@80f00000 {
+				compatible = "arm,pl192-vic";
+				reg = <0x80f00000 0x1000>;
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+
+			uarta: serial@e0 {
+				compatible = "ns16550a";
+				reg = <0xe0 0x8>;
+				interrupts = <17>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartb: serial@e8 {
+				compatible = "ns16550a";
+				reg = <0xe8 0x8>;
+				interrupts = <18>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			uartc: serial@f0 {
+				compatible = "ns16550a";
+				reg = <0xf0 0x8>;
+				interrupts = <19>;
+				interrupt-parent = <&vic0>;
+				clock-frequency = <1846153>;
+				reg-shift = <0>;
+			};
+
+			usb0: usb@efe0000 {
+				compatible = "hpe,gxp-ehci", "generic-ehci";
+				reg = <0xefe0000 0x100>;
+				interrupts = <7>;
+				interrupt-parent = <&vic0>;
+			};
+
+			st: timer@80 {
+				compatible = "hpe,gxp-timer";
+				reg = <0x80 0x16>;
+				interrupts = <0>;
+				interrupt-parent = <&vic0>;
+				clocks = <&iopclk>;
+				clock-names = "iop";
+			};
+
+			usb1: usb@efe0100 {
+				compatible = "hpe,gxp-ohci", "generic-ohci";
+				reg = <0xefe0100 0x110>;
+				interrupts = <6>;
+				interrupt-parent = <&vic0>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/ibm-power9-dual.dtsi b/arch/arm/boot/dts/ibm-power9-dual.dtsi
new file mode 100644
index 000000000000..a0fa65b44b0f
--- /dev/null
+++ b/arch/arm/boot/dts/ibm-power9-dual.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2018 IBM Corp
+
+&fsi {
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam0_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam0_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam0_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam0_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam0_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam0_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam0_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam0_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam0_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam0_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam0_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam0_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam0_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam0_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam0_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ@1 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		i2c@1800 {
+			compatible = "ibm,fsi-i2c-master";
+			reg = <0x1800 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cfam1_i2c0: i2c-bus@0 {
+				reg = <0>;
+			};
+
+			cfam1_i2c1: i2c-bus@1 {
+				reg = <1>;
+			};
+
+			cfam1_i2c2: i2c-bus@2 {
+				reg = <2>;
+			};
+
+			cfam1_i2c3: i2c-bus@3 {
+				reg = <3>;
+			};
+
+			cfam1_i2c4: i2c-bus@4 {
+				reg = <4>;
+			};
+
+			cfam1_i2c5: i2c-bus@5 {
+				reg = <5>;
+			};
+
+			cfam1_i2c6: i2c-bus@6 {
+				reg = <6>;
+			};
+
+			cfam1_i2c7: i2c-bus@7 {
+				reg = <7>;
+			};
+
+			cfam1_i2c8: i2c-bus@8 {
+				reg = <8>;
+			};
+
+			cfam1_i2c9: i2c-bus@9 {
+				reg = <9>;
+			};
+
+			cfam1_i2c10: i2c-bus@a {
+				reg = <10>;
+			};
+
+			cfam1_i2c11: i2c-bus@b {
+				reg = <11>;
+			};
+
+			cfam1_i2c12: i2c-bus@c {
+				reg = <12>;
+			};
+
+			cfam1_i2c13: i2c-bus@d {
+				reg = <13>;
+			};
+
+			cfam1_i2c14: i2c-bus@e {
+				reg = <14>;
+			};
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ@2 {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
+/ {
+	aliases {
+		i2c100 = &cfam0_i2c0;
+		i2c101 = &cfam0_i2c1;
+		i2c102 = &cfam0_i2c2;
+		i2c103 = &cfam0_i2c3;
+		i2c104 = &cfam0_i2c4;
+		i2c105 = &cfam0_i2c5;
+		i2c106 = &cfam0_i2c6;
+		i2c107 = &cfam0_i2c7;
+		i2c108 = &cfam0_i2c8;
+		i2c109 = &cfam0_i2c9;
+		i2c110 = &cfam0_i2c10;
+		i2c111 = &cfam0_i2c11;
+		i2c112 = &cfam0_i2c12;
+		i2c113 = &cfam0_i2c13;
+		i2c114 = &cfam0_i2c14;
+		i2c200 = &cfam1_i2c0;
+		i2c201 = &cfam1_i2c1;
+		i2c202 = &cfam1_i2c2;
+		i2c203 = &cfam1_i2c3;
+		i2c204 = &cfam1_i2c4;
+		i2c205 = &cfam1_i2c5;
+		i2c206 = &cfam1_i2c6;
+		i2c207 = &cfam1_i2c7;
+		i2c208 = &cfam1_i2c8;
+		i2c209 = &cfam1_i2c9;
+		i2c210 = &cfam1_i2c10;
+		i2c211 = &cfam1_i2c11;
+		i2c212 = &cfam1_i2c12;
+		i2c213 = &cfam1_i2c13;
+		i2c214 = &cfam1_i2c14;
+	};
+};
diff --git a/arch/arm/boot/dts/imx1-ads.dts b/arch/arm/boot/dts/imx1-ads.dts
index af4eee5794aa..5833fb6f15d8 100644
--- a/arch/arm/boot/dts/imx1-ads.dts
+++ b/arch/arm/boot/dts/imx1-ads.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -20,25 +14,14 @@
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@8000000 {
+		device_type = "memory";
 		reg = <0x08000000 0x04000000>;
 	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32 {
-			compatible = "fsl,imx-clk32", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32000>;
-		};
-	};
 };
 
 &cspi1 {
 	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -66,14 +49,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx1-apf9328.dts b/arch/arm/boot/dts/imx1-apf9328.dts
index 07d92fb40e6f..77b21aa7a146 100644
--- a/arch/arm/boot/dts/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/imx1-apf9328.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -20,7 +14,8 @@
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@8000000 {
+		device_type = "memory";
 		reg = <0x08000000 0x00800000>;
 	};
 };
@@ -34,14 +29,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx1-pinfunc.h b/arch/arm/boot/dts/imx1-pinfunc.h
index 22bec8b87680..bd2e679cb26c 100644
--- a/arch/arm/boot/dts/imx1-pinfunc.h
+++ b/arch/arm/boot/dts/imx1-pinfunc.h
@@ -1,12 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DTS_IMX1_PINFUNC_H
@@ -32,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. i.MX1 has 4 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX1_PAD_A24__A24			0x00 0x004
diff --git a/arch/arm/boot/dts/imx1.dtsi b/arch/arm/boot/dts/imx1.dtsi
index 22f5d1db5b31..e312f1e74e2f 100644
--- a/arch/arm/boot/dts/imx1.dtsi
+++ b/arch/arm/boot/dts/imx1.dtsi
@@ -1,15 +1,7 @@
-/*
- * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
 
-#include "skeleton.dtsi"
 #include "imx1-pinfunc.h"
 
 #include <dt-bindings/clock/imx1-clock.h>
@@ -17,6 +9,15 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
@@ -30,7 +31,7 @@
 		spi1 = &cspi2;
 	};
 
-	aitc: aitc-interrupt-controller@00223000 {
+	aitc: aitc-interrupt-controller@223000 {
 		compatible = "fsl,imx1-aitc", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
@@ -41,8 +42,9 @@
 		#size-cells = <0>;
 		#address-cells = <1>;
 
-		cpu: cpu@0 {
+		cpu@0 {
 			device_type = "cpu";
+			reg = <0>;
 			compatible = "arm,arm920t";
 			operating-points = <200000 1900000>;
 			clock-latency = <62500>;
@@ -51,6 +53,14 @@
 		};
 	};
 
+	clocks {
+		clk32 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -58,14 +68,14 @@
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@00200000 {
+		aipi@200000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x00200000 0x10000>;
 			ranges;
 
-			gpt1: timer@00202000 {
+			gpt1: timer@202000 {
 				compatible = "fsl,imx1-gpt";
 				reg = <0x00202000 0x1000>;
 				interrupts = <59>;
@@ -74,7 +84,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			gpt2: timer@00203000 {
+			gpt2: timer@203000 {
 				compatible = "fsl,imx1-gpt";
 				reg = <0x00203000 0x1000>;
 				interrupts = <58>;
@@ -83,7 +93,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			fb: fb@00205000 {
+			fb: fb@205000 {
 				compatible = "fsl,imx1-fb";
 				reg = <0x00205000 0x1000>;
 				interrupts = <14>;
@@ -94,7 +104,7 @@
 				status = "disabled";
 			};
 
-			uart1: serial@00206000 {
+			uart1: serial@206000 {
 				compatible = "fsl,imx1-uart";
 				reg = <0x00206000 0x1000>;
 				interrupts = <30 29 26>;
@@ -104,7 +114,7 @@
 				status = "disabled";
 			};
 
-			uart2: serial@00207000 {
+			uart2: serial@207000 {
 				compatible = "fsl,imx1-uart";
 				reg = <0x00207000 0x1000>;
 				interrupts = <24 23 20>;
@@ -114,8 +124,8 @@
 				status = "disabled";
 			};
 
-			pwm: pwm@00208000 {
-				#pwm-cells = <2>;
+			pwm: pwm@208000 {
+				#pwm-cells = <3>;
 				compatible = "fsl,imx1-pwm";
 				reg = <0x00208000 0x1000>;
 				interrupts = <34>;
@@ -124,7 +134,7 @@
 				clock-names = "ipg", "per";
 			};
 
-			dma: dma@00209000 {
+			dma: dma@209000 {
 				compatible = "fsl,imx1-dma";
 				reg = <0x00209000 0x1000>;
 				interrupts = <61 60>;
@@ -134,7 +144,7 @@
 				#dma-cells = <1>;
 			};
 
-			uart3: serial@0020a000 {
+			uart3: serial@20a000 {
 				compatible = "fsl,imx1-uart";
 				reg = <0x0020a000 0x1000>;
 				interrupts = <54 4 1>;
@@ -145,14 +155,14 @@
 			};
 		};
 
-		aipi@00210000 {
+		aipi@210000 {
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x00210000 0x10000>;
 			ranges;
 
-			cspi1: cspi@00213000 {
+			cspi1: spi@213000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx1-cspi";
@@ -164,7 +174,7 @@
 				status = "disabled";
 			};
 
-			i2c: i2c@00217000 {
+			i2c: i2c@217000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx1-i2c";
@@ -174,7 +184,7 @@
 				status = "disabled";
 			};
 
-			cspi2: cspi@00219000 {
+			cspi2: spi@219000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx1-cspi";
@@ -186,20 +196,20 @@
 				status = "disabled";
 			};
 
-			clks: ccm@0021b000 {
+			clks: ccm@21b000 {
 				compatible = "fsl,imx1-ccm";
 				reg = <0x0021b000 0x1000>;
 				#clock-cells = <1>;
 			};
 
-			iomuxc: iomuxc@0021c000 {
+			iomuxc: iomuxc@21c000 {
 				compatible = "fsl,imx1-iomuxc";
 				reg = <0x0021c000 0x1000>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges;
 
-				gpio1: gpio@0021c000 {
+				gpio1: gpio@21c000 {
 					compatible = "fsl,imx1-gpio";
 					reg = <0x0021c000 0x100>;
 					interrupts = <11>;
@@ -209,7 +219,7 @@
 					#interrupt-cells = <2>;
 				};
 
-				gpio2: gpio@0021c100 {
+				gpio2: gpio@21c100 {
 					compatible = "fsl,imx1-gpio";
 					reg = <0x0021c100 0x100>;
 					interrupts = <12>;
@@ -219,7 +229,7 @@
 					#interrupt-cells = <2>;
 				};
 
-				gpio3: gpio@0021c200 {
+				gpio3: gpio@21c200 {
 					compatible = "fsl,imx1-gpio";
 					reg = <0x0021c200 0x100>;
 					interrupts = <13>;
@@ -229,7 +239,7 @@
 					#interrupt-cells = <2>;
 				};
 
-				gpio4: gpio@0021c300 {
+				gpio4: gpio@21c300 {
 					compatible = "fsl,imx1-gpio";
 					reg = <0x0021c300 0x100>;
 					interrupts = <62>;
@@ -241,7 +251,7 @@
 			};
 		};
 
-		weim: weim@00220000 {
+		weim: weim@220000 {
 			#address-cells = <2>;
 			#size-cells = <1>;
 			compatible = "fsl,imx1-weim";
@@ -258,7 +268,7 @@
 			status = "disabled";
 		};
 
-		esram: esram@00300000 {
+		esram: esram@300000 {
 			compatible = "mmio-sram";
 			reg = <0x00300000 0x20000>;
 		};
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index 57e29977ba06..3b609d987d88 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
 
 /dts-v1/;
 #include "imx23.dtsi"
@@ -16,19 +9,57 @@
 	model = "Freescale i.MX23 Evaluation Kit";
 	compatible = "fsl,imx23-evk", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 18 0>;
+		enable-active-high;
+	};
+
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
 	apb@80000000 {
 		apbh@80000000 {
-			gpmi-nand@8000c000 {
+			nand-controller@8000c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>;
 				status = "okay";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
@@ -48,7 +79,6 @@
 						MX23_PAD_LCD_RESET__GPIO_1_18
 						MX23_PAD_PWM3__GPIO_1_29
 						MX23_PAD_PWM4__GPIO_1_30
-						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 					>;
 					fsl,drive-strength = <MXS_DRIVE_4mA>;
 					fsl,voltage = <MXS_VOLTAGE_HIGH>;
@@ -59,31 +89,11 @@
 			lcdif@80030000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&lcdif_24bit_pins_a>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display0>;
 				status = "okay";
 
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9200000>;
-							hactive = <480>;
-							vactive = <272>;
-							hback-porch = <15>;
-							hfront-porch = <8>;
-							vback-porch = <12>;
-							vfront-porch = <4>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
+				port {
+					display_out: endpoint {
+						remote-endpoint = <&panel_in>;
 					};
 				};
 			};
@@ -125,32 +135,7 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_vddio_sd0: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 29 0>;
-		};
-
-		reg_lcd_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 18 0>;
-			enable-active-high;
-		};
-	};
-
-	backlight {
+	backlight_display: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 2 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index a8b1c53ebe46..0729e72f2283 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -1,14 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -19,16 +13,17 @@
 	model = "i.MX23 Olinuxino Low Cost Board";
 	compatible = "olimex,imx23-olinuxino", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x04000000>;
 	};
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
 				bus-width = <4>;
 				broken-cd;
 				status = "okay";
@@ -59,7 +54,7 @@
 				};
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx23-spi";
diff --git a/arch/arm/boot/dts/imx23-pinfunc.h b/arch/arm/boot/dts/imx23-pinfunc.h
index 5c0f32ca3a93..468c079f3c2b 100644
--- a/arch/arm/boot/dts/imx23-pinfunc.h
+++ b/arch/arm/boot/dts/imx23-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX23 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX23_PINCTRL_H__
diff --git a/arch/arm/boot/dts/imx23-sansa.dts b/arch/arm/boot/dts/imx23-sansa.dts
new file mode 100644
index 000000000000..46057d9bf555
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-sansa.dts
@@ -0,0 +1,207 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include "imx23.dtsi"
+
+/ {
+	model = "SanDisk Sansa Fuze+";
+	compatible = "sandisk,sansa_fuze_plus", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: spi@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_8bit_pins_a>;
+				bus-width = <8>;
+				vmmc-supply = <&reg_vddio_sd1>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D08__GPIO_0_8
+						MX23_PAD_PWM3__GPIO_1_29
+						MX23_PAD_AUART1_RTS__GPIO_0_27
+						MX23_PAD_AUART1_CTS__GPIO_0_26
+						MX23_PAD_I2C_SCL__I2C_SCL
+						MX23_PAD_I2C_SDA__I2C_SDA
+						MX23_PAD_LCD_DOTCK__GPIO_1_22
+						MX23_PAD_LCD_HSYNC__GPIO_1_24
+						MX23_PAD_PWM3__GPIO_1_29
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 8 0>;
+	};
+
+	reg_vddio_sd1: regulator-vddio-sd1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 0>;
+	};
+
+	reg_vdd_touchpad: regulator-vdd-touchpad0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-touchpad0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 26 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	reg_vdd_tuner: regulator-vdd-tuner0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd-tuner0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 29 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	i2c-0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio1 24 0		/* SDA */
+			&gpio1 22 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
+
+	i2c-1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "i2c-gpio";
+		gpios = <
+			&gpio0 31 0		/* SDA */
+			&gpio0 30 0		/* SCL */
+		>;
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+
+		touch: touch@20 {
+			compatible = "synaptics,synaptics_i2c";
+			reg = <0x20>;
+		};
+
+		eeprom: eeprom@50 {
+			compatible = "atmel,24c64";
+			reg = <0x50>;
+			pagesize = <32>;
+		};
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
index 455169e99d49..da4b88f32eaa 100644
--- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts
+++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,13 +10,14 @@
 	model = "Freescale STMP378x Development Board";
 	compatible = "fsl,stmp378x-devb", "fsl,imx23";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x04000000>;
 	};
 
 	apb@80000000 {
 		apbh@80000000 {
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				compatible = "fsl,imx23-mmc";
 				pinctrl-names = "default";
 				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
diff --git a/arch/arm/boot/dts/imx23-xfi3.dts b/arch/arm/boot/dts/imx23-xfi3.dts
new file mode 100644
index 000000000000..b1d8210f3ecc
--- /dev/null
+++ b/arch/arm/boot/dts/imx23-xfi3.dts
@@ -0,0 +1,180 @@
+/*
+ * Copyright (C) 2013-2016 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx23.dtsi"
+
+/ {
+	model = "Creative ZEN X-Fi3";
+	compatible = "creative,x-fi3", "fsl,imx23";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x04000000>;
+	};
+
+	apb@80000000 {
+		apbh@80000000 {
+			ssp0: spi@80010000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>;
+				bus-width = <4>;
+				vmmc-supply = <&reg_vddio_sd0>;
+				cd-inverted;
+				status = "okay";
+			};
+
+			ssp1: spi@80034000 {
+				compatible = "fsl,imx23-mmc";
+				pinctrl-names = "default";
+				pinctrl-0 = <&mmc1_4bit_pins_a>;
+				bus-width = <4>;
+				non-removable;
+				status = "okay";
+			};
+
+			pinctrl@80018000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&hog_pins_a>;
+
+				hog_pins_a: hog@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D07__GPIO_0_7
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				key_pins_a: keys@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_ROTARYA__GPIO_2_7
+						MX23_PAD_ROTARYB__GPIO_2_8
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+			};
+		};
+
+		apbx@80040000 {
+			i2c: i2c@80058000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c_pins_a>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm2_pins_a>;
+				status = "okay";
+			};
+
+			duart: serial@80070000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&duart_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_2pins_a>;
+				status = "okay";
+			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+
+			lradc@80050000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			dr_mode = "peripheral";
+			status = "okay";
+		};
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio0 7 0>;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 2 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		key-voldown {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio2 7 0>;
+			debounce-interval = <20>;
+		};
+
+		key-volup {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio2 8 0>;
+			debounce-interval = <20>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index c892d58e8dad..d19508c8f9ed 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -1,19 +1,20 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+
 #include "imx23-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
 
 	aliases {
 		gpio0 = &gpio0;
@@ -27,12 +28,13 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -62,8 +64,6 @@
 				reg = <0x80004000 0x2000>;
 				interrupts = <0 14 20 0
 					      13 13 13 13>;
-				interrupt-names = "empty", "ssp0", "ssp1", "empty",
-						  "gpmi0", "gpmi1", "gpmi2", "gpmi3";
 				#dma-cells = <1>;
 				dma-channels = <8>;
 				clocks = <&clks 15>;
@@ -74,7 +74,7 @@
 				status = "disabled";
 			};
 
-			gpmi-nand@8000c000 {
+			nand-controller@8000c000 {
 				compatible = "fsl,imx23-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -89,7 +89,7 @@
 				status = "disabled";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				reg = <0x80010000 0x2000>;
 				interrupts = <15>;
 				clocks = <&clks 33>;
@@ -111,6 +111,7 @@
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <0>;
 					interrupts = <16>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -120,6 +121,7 @@
 
 				gpio1: gpio@1 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <1>;
 					interrupts = <17>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -129,6 +131,7 @@
 
 				gpio2: gpio@2 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
+					reg = <2>;
 					interrupts = <18>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -171,6 +174,17 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				auart1_2pins_a: auart1-2pins@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D14__AUART2_RX
+						MX23_PAD_GPMI_D15__AUART2_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				gpmi_pins_a: gpmi-nand@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -197,7 +211,8 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				gpmi_pins_fixup: gpmi-pins-fixup {
+				gpmi_pins_fixup: gpmi-pins-fixup@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX23_PAD_GPMI_WPN__GPMI_WPN
 						MX23_PAD_GPMI_WRN__GPMI_WRN
@@ -241,7 +256,8 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc0_pins_fixup: mmc0-pins-fixup {
+				mmc0_pins_fixup: mmc0-pins-fixup@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX23_PAD_SSP1_DETECT__SSP1_DETECT
 						MX23_PAD_SSP1_SCK__SSP1_SCK
@@ -249,6 +265,48 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_SSP1_SCK__SSP1_SCK
+					>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
+				mmc1_4bit_pins_a: mmc1-4bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc1_8bit_pins_a: mmc1-8bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						MX23_PAD_GPMI_D00__SSP2_DATA0
+						MX23_PAD_GPMI_D01__SSP2_DATA1
+						MX23_PAD_GPMI_D02__SSP2_DATA2
+						MX23_PAD_GPMI_D03__SSP2_DATA3
+						MX23_PAD_GPMI_D04__SSP2_DATA4
+						MX23_PAD_GPMI_D05__SSP2_DATA5
+						MX23_PAD_GPMI_D06__SSP2_DATA6
+						MX23_PAD_GPMI_D07__SSP2_DATA7
+						MX23_PAD_GPMI_RDY1__SSP2_CMD
+						MX23_PAD_GPMI_WRN__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				pwm2_pins_a: pwm2@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -370,7 +428,7 @@
 				clocks = <&clks 16>;
 			};
 
-			dcp@80028000 {
+			dcp: crypto@80028000 {
 				compatible = "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
 				interrupts = <53 54>;
@@ -382,10 +440,12 @@
 				status = "disabled";
 			};
 
-			ocotp@8002c000 {
-				compatible = "fsl,ocotp";
+			efuse@8002c000 {
+				compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x8002c000 0x2000>;
-				status = "disabled";
+				clocks = <&clks 15>;
 			};
 
 			axi-ahb@8002e000 {
@@ -401,7 +461,7 @@
 				status = "disabled";
 			};
 
-			ssp1: ssp@80034000 {
+			ssp1: spi@80034000 {
 				reg = <0x80034000 0x2000>;
 				interrupts = <2>;
 				clocks = <&clks 33>;
@@ -414,7 +474,7 @@
 				reg = <0x80038000 0x2000>;
 				status = "disabled";
 			};
-                };
+		};
 
 		apbx@80040000 {
 			compatible = "simple-bus";
@@ -468,6 +528,7 @@
 				interrupts = <36 37 38 39 40 41 42 43 44>;
 				status = "disabled";
 				clocks = <&clks 26>;
+				#io-channel-cells = <1>;
 			};
 
 			spdif@80054000 {
@@ -566,7 +627,7 @@
 		};
 	};
 
-	iio_hwmon {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&lradc 8>;
 	};
diff --git a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
index d6f27641c0ef..0703f62d10d1 100644
--- a/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
+++ b/arch/arm/boot/dts/imx25-eukrea-cpuimx25.dtsi
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include "imx25.dtsi"
@@ -17,7 +9,8 @@
 	model = "Eukrea CPUIMX25";
 	compatible = "eukrea,cpuimx25", "fsl,imx25";
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x4000000>; /* 64M */
 	};
 };
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
index 68d0834a2d1e..7d4301b22b90 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include "imx25-eukrea-mbimxsd25-baseboard.dts"
@@ -22,8 +14,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xcad08b80>;
 		bus-width = <18>;
-		native-mode = <&qvga_timings>;
 		display-timings {
+			native-mode = <&qvga_timings>;
 			qvga_timings: 320x240 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
index 8eee2f65fe00..80a7f96de4c6 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include "imx25-eukrea-mbimxsd25-baseboard.dts"
@@ -22,8 +14,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&dvi_svga_timings>;
 		display-timings {
+			native-mode = <&dvi_svga_timings>;
 			dvi_svga_timings: 800x600 {
 				clock-frequency = <40000000>;
 				hactive = <800>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
index 447da6263169..24027a1fb46d 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include "imx25-eukrea-mbimxsd25-baseboard.dts"
@@ -22,8 +14,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&dvi_vga_timings>;
 		display-timings {
+			native-mode = <&dvi_vga_timings>;
 			dvi_vga_timings: 640x480 {
 				clock-frequency = <31250000>;
 				hactive = <640>;
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
index ed1d0b4578ef..c7207ea437c4 100644
--- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /dts-v1/;
@@ -21,16 +13,16 @@
 	model = "Eukrea MBIMXSD25";
 	compatible = "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpiokeys>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -64,7 +56,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 20>;
+	cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -88,12 +80,12 @@
 
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x400000c0
-				MX25_PAD_SD1_CLK__SD1_CLK		0x400000c0
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x400000c0
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x400000c0
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x400000c0
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x400000c0
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x400000c0
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x400000c0
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x400000c0
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x400000c0
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x400000c0
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x400000c0
 			>;
 		};
 
@@ -161,26 +153,22 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
 	status = "okay";
 };
 
 &usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
 	external-vbus-divider;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx25-karo-tx25.dts b/arch/arm/boot/dts/imx25-karo-tx25.dts
index 9b31faa96377..0950eb66d3d9 100644
--- a/arch/arm/boot/dts/imx25-karo-tx25.dts
+++ b/arch/arm/boot/dts/imx25-karo-tx25.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -36,7 +30,8 @@
 		};
 	};
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
 	};
 };
@@ -97,7 +92,7 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
-	phy-reset-gpios = <&gpio3 7 0>;
+	phy-reset-gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 	phy-mode = "rmii";
 	phy-supply = <&reg_fec_phy>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts
index dd45e6971bc3..fb66884d8a2f 100644
--- a/arch/arm/boot/dts/imx25-pdk.dts
+++ b/arch/arm/boot/dts/imx25-pdk.dts
@@ -1,15 +1,9 @@
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include "imx25.dtsi"
 
@@ -17,7 +11,8 @@
 	model = "Freescale i.MX25 Product Development Kit";
 	compatible = "fsl,imx25-pdk", "fsl,imx25";
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x4000000>;
 	};
 
@@ -81,8 +76,8 @@
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfa208b80>;
 		bus-width = <18>;
-		native-mode = <&wvga_timings>;
 		display-timings {
+			native-mode = <&wvga_timings>;
 			wvga_timings: 640x480 {
 				hactive = <640>;
 				vactive = <480>;
@@ -114,8 +109,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 1 0>;
-	wp-gpios = <&gpio2 0 0>;
+	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -124,7 +119,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-supply = <&reg_fec_3v3>;
-	phy-reset-gpios = <&gpio4 8 0>;
+	phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -134,7 +129,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		clocks = <&clks 129>;
@@ -164,12 +159,12 @@
 
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
-				MX25_PAD_SD1_CMD__SD1_CMD		0x80000000
-				MX25_PAD_SD1_CLK__SD1_CLK		0x80000000
-				MX25_PAD_SD1_DATA0__SD1_DATA0		0x80000000
-				MX25_PAD_SD1_DATA1__SD1_DATA1		0x80000000
-				MX25_PAD_SD1_DATA2__SD1_DATA2		0x80000000
-				MX25_PAD_SD1_DATA3__SD1_DATA3		0x80000000
+				MX25_PAD_SD1_CMD__ESDHC1_CMD		0x80000000
+				MX25_PAD_SD1_CLK__ESDHC1_CLK		0x80000000
+				MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x80000000
+				MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x80000000
+				MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x80000000
+				MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x80000000
 				MX25_PAD_A14__GPIO_2_0			0x80000000
 				MX25_PAD_A15__GPIO_2_1			0x80000000
 			>;
@@ -290,26 +285,29 @@
 };
 
 &ssi1 {
-	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&tsc {
+	status = "okay";
+};
+
+&tscadc {
 	status = "okay";
 };
 
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &usbhost1 {
-	phy_type = "serial";
-	dr_mode = "host";
 	status = "okay";
 };
 
 &usbotg {
-	phy_type = "utmi";
-	dr_mode = "otg";
 	external-vbus-divider;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx25-pinfunc.h b/arch/arm/boot/dts/imx25-pinfunc.h
index 7c4b9f2f9aad..908caf810351 100644
--- a/arch/arm/boot/dts/imx25-pinfunc.h
+++ b/arch/arm/boot/dts/imx25-pinfunc.h
@@ -1,12 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
  * Based on imx35-pinfunc.h in the same directory Which is:
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef __DTS_IMX25_PINFUNC_H
@@ -17,8 +13,6 @@
  * <mux_reg conf_reg input_reg mux_mode input_val>
  */
 
-#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
-
 #define MX25_PAD_A10__A10			0x008 0x000 0x000 0x00 0x000
 #define MX25_PAD_A10__GPIO_4_0			0x008 0x000 0x000 0x05 0x000
 
@@ -26,77 +20,78 @@
 #define MX25_PAD_A13__GPIO_4_1			0x00c 0x22C 0x000 0x05 0x000
 #define MX25_PAD_A13__LCDC_CLS			0x00c 0x22C 0x000 0x07 0x000
 
-#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x10 0x000
-#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x15 0x000
-#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x16 0x000
-#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x17 0x000
-
-#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x10 0x000
-#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x15 0x000
-#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x16 0x000
-#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x17 0x000
-
-#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x10 0x000
-#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x15 0x000
-#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x16 0x000
-#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x10 0x000
-#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x15 0x000
-#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x16 0x000
-#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x17 0x000
-
-#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x10 0x000
-#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x15 0x000
-#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x16 0x000
-#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x17 0x000
-
-#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x10 0x000
-#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x15 0x000
-#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x16 0x000
-#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x17 0x000
-
-#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x10 0x000
-#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x15 0x000
-#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x16 0x000
-#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x17 0x000
-
-#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x10 0x000
-#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x15 0x000
-#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x16 0x000
-#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x17 0x000
-
-#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x10 0x000
-#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x15 0x000
-#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
-#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x16 0x000
-#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x17 0x000
-
-#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x10 0x000
-#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x15 0x000
-#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x16 0x000
-#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x17 0x000
-
-#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x10 0x000
-#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x15 0x000
-#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x16 0x000
-#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x17 0x000
-
-#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x10 0x000
-#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x15 0x000
-#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x17 0x000
-
-#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x10 0x000
-#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x14 0x000
-#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x15 0x000
-
-#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x10 0x000
-#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x14 0x000
-#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x15 0x000
-
-#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x10 0x000
-#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x14 0x000
-#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x15 0x000
+#define MX25_PAD_A14__A14			0x010 0x230 0x000 0x00 0x000
+#define MX25_PAD_A14__GPIO_2_0			0x010 0x230 0x000 0x05 0x000
+#define MX25_PAD_A14__SIM1_CLK1			0x010 0x230 0x000 0x06 0x000
+#define MX25_PAD_A14__LCDC_SPL			0x010 0x230 0x000 0x07 0x000
+
+#define MX25_PAD_A15__A15			0x014 0x234 0x000 0x00 0x000
+#define MX25_PAD_A15__GPIO_2_1			0x014 0x234 0x000 0x05 0x000
+#define MX25_PAD_A15__SIM1_RST1			0x014 0x234 0x000 0x06 0x000
+#define MX25_PAD_A15__LCDC_PS			0x014 0x234 0x000 0x07 0x000
+
+#define MX25_PAD_A16__A16			0x018 0x000 0x000 0x00 0x000
+#define MX25_PAD_A16__GPIO_2_2			0x018 0x000 0x000 0x05 0x000
+#define MX25_PAD_A16__SIM1_VEN1			0x018 0x000 0x000 0x06 0x000
+#define MX25_PAD_A16__LCDC_REV			0x018 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A17__A17			0x01c 0x238 0x000 0x00 0x000
+#define MX25_PAD_A17__GPIO_2_3			0x01c 0x238 0x000 0x05 0x000
+#define MX25_PAD_A17__SIM1_TX			0x01c 0x238 0x554 0x06 0x000
+#define MX25_PAD_A17__FEC_TX_ERR		0x01c 0x238 0x000 0x07 0x000
+
+#define MX25_PAD_A18__A18			0x020 0x23c 0x000 0x00 0x000
+#define MX25_PAD_A18__GPIO_2_4			0x020 0x23c 0x000 0x05 0x000
+#define MX25_PAD_A18__SIM1_PD1			0x020 0x23c 0x550 0x06 0x000
+#define MX25_PAD_A18__FEC_COL			0x020 0x23c 0x504 0x07 0x000
+
+#define MX25_PAD_A19__A19			0x024 0x240 0x000 0x00 0x000
+#define MX25_PAD_A19__GPIO_2_5			0x024 0x240 0x000 0x05 0x000
+#define MX25_PAD_A19__SIM1_RX1			0x024 0x240 0x54c 0x06 0x000
+#define MX25_PAD_A19__FEC_RX_ERR		0x024 0x240 0x518 0x07 0x000
+
+#define MX25_PAD_A20__A20			0x028 0x244 0x000 0x00 0x000
+#define MX25_PAD_A20__GPIO_2_6			0x028 0x244 0x000 0x05 0x000
+#define MX25_PAD_A20__SIM2_CLK1			0x028 0x244 0x000 0x06 0x000
+#define MX25_PAD_A20__FEC_RDATA2		0x028 0x244 0x50c 0x07 0x000
+
+#define MX25_PAD_A21__A21			0x02c 0x248 0x000 0x00 0x000
+#define MX25_PAD_A21__GPIO_2_7			0x02c 0x248 0x000 0x05 0x000
+#define MX25_PAD_A21__SIM2_RST1			0x02c 0x248 0x000 0x06 0x000
+#define MX25_PAD_A21__FEC_RDATA3		0x02c 0x248 0x510 0x07 0x000
+
+#define MX25_PAD_A22__A22			0x030 0x000 0x000 0x00 0x000
+#define MX25_PAD_A22__GPIO_2_8			0x030 0x000 0x000 0x05 0x000
+#define MX25_PAD_A22__SIM2_VEN1			0x030 0x000 0x000 0x06 0x000
+#define MX25_PAD_A22__FEC_TDATA2		0x030 0x000 0x000 0x07 0x000
+
+#define MX25_PAD_A23__A23			0x034 0x24c 0x000 0x00 0x000
+#define MX25_PAD_A23__GPIO_2_9			0x034 0x24c 0x000 0x05 0x000
+#define MX25_PAD_A23__SIM2_TX1			0x034 0x24c 0x560 0x06 0x000
+#define MX25_PAD_A23__FEC_TDATA3		0x034 0x24c 0x000 0x07 0x000
+
+#define MX25_PAD_A24__A24			0x038 0x250 0x000 0x00 0x000
+#define MX25_PAD_A24__GPIO_2_10			0x038 0x250 0x000 0x05 0x000
+#define MX25_PAD_A24__SIM2_PD1			0x038 0x250 0x55c 0x06 0x000
+#define MX25_PAD_A24__FEC_RX_CLK		0x038 0x250 0x514 0x07 0x000
+
+#define MX25_PAD_A25__A25			0x03c 0x254 0x000 0x00 0x000
+#define MX25_PAD_A25__GPIO_2_11			0x03c 0x254 0x000 0x05 0x000
+#define MX25_PAD_A25__FEC_CRS			0x03c 0x254 0x508 0x07 0x000
+
+#define MX25_PAD_EB0__EB0			0x040 0x258 0x000 0x00 0x000
+#define MX25_PAD_EB0__AUD4_TXD			0x040 0x258 0x464 0x04 0x000
+#define MX25_PAD_EB0__GPIO_2_12			0x040 0x258 0x000 0x05 0x000
+#define MX25_PAD_EB0__CSPI3_SS0			0x040 0x258 0x4bc 0x06 0x000
+
+#define MX25_PAD_EB1__EB1			0x044 0x25c 0x000 0x00 0x000
+#define MX25_PAD_EB1__AUD4_RXD			0x044 0x25c 0x460 0x04 0x000
+#define MX25_PAD_EB1__GPIO_2_13			0x044 0x25c 0x000 0x05 0x000
+#define MX25_PAD_EB1__CSPI3_SS1			0x044 0x25c 0x4c0 0x06 0x000
+
+#define MX25_PAD_OE__OE				0x048 0x260 0x000 0x00 0x000
+#define MX25_PAD_OE__AUD4_TXC			0x048 0x260 0x000 0x04 0x000
+#define MX25_PAD_OE__GPIO_2_14			0x048 0x260 0x000 0x05 0x000
 
 #define MX25_PAD_CS0__CS0			0x04c 0x000 0x000 0x00 0x000
 #define MX25_PAD_CS0__GPIO_4_2			0x04c 0x000 0x000 0x05 0x000
@@ -105,70 +100,75 @@
 #define MX25_PAD_CS1__NF_CE3			0x050 0x000 0x000 0x01 0x000
 #define MX25_PAD_CS1__GPIO_4_3			0x050 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x10 0x000
+#define MX25_PAD_CS4__CS4			0x054 0x264 0x000 0x00 0x000
 #define MX25_PAD_CS4__NF_CE1			0x054 0x264 0x000 0x01 0x000
-#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x13 0x000
-#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x15 0x000
+#define MX25_PAD_CS4__UART5_CTS			0x054 0x264 0x000 0x03 0x000
+#define MX25_PAD_CS4__GPIO_3_20			0x054 0x264 0x000 0x05 0x000
+#define MX25_PAD_CS4__CSPI3_MOSI		0x054 0x264 0x4b8 0x06 0x000
 
-#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x10 0x000
+#define MX25_PAD_CS5__CS5			0x058 0x268 0x000 0x00 0x000
 #define MX25_PAD_CS5__NF_CE2			0x058 0x268 0x000 0x01 0x000
-#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x13 0x000
-#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x15 0x000
+#define MX25_PAD_CS5__UART5_RTS			0x058 0x268 0x574 0x03 0x000
+#define MX25_PAD_CS5__GPIO_3_21			0x058 0x268 0x000 0x05 0x000
+#define MX25_PAD_CS5__CSPI3_MISO		0x058 0x268 0x4b4 0x06 0x000
 
-#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x10 0x000
-#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x15 0x000
+#define MX25_PAD_NF_CE0__NF_CE0			0x05c 0x26c 0x000 0x00 0x000
+#define MX25_PAD_NF_CE0__CSPI1_SS3		0x05c 0x26c 0x490 0x01 0x000
+#define MX25_PAD_NF_CE0__GPIO_3_22		0x05c 0x26c 0x000 0x05 0x000
 
-#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x10 0x000
-#define MX25_PAD_ECB__UART5_TXD_MUX		0x060 0x270 0x000 0x13 0x000
-#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x15 0x000
+#define MX25_PAD_ECB__ECB			0x060 0x270 0x000 0x00 0x000
+#define MX25_PAD_ECB__UART5_TXD			0x060 0x270 0x000 0x03 0x000
+#define MX25_PAD_ECB__GPIO_3_23			0x060 0x270 0x000 0x05 0x000
+#define MX25_PAD_ECB__CSPI3_SCLK		0x060 0x270 0x4ac 0x06 0x000
 
-#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x10 0x000
-#define MX25_PAD_LBA__UART5_RXD_MUX		0x064 0x274 0x578 0x13 0x000
-#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x15 0x000
+#define MX25_PAD_LBA__LBA			0x064 0x274 0x000 0x00 0x000
+#define MX25_PAD_LBA__UART5_RXD			0x064 0x274 0x578 0x03 0x000
+#define MX25_PAD_LBA__GPIO_3_24			0x064 0x274 0x000 0x05 0x000
+#define MX25_PAD_LBA__CSPI3_RDY			0x064 0x274 0x4b0 0x06 0x000
 
 #define MX25_PAD_BCLK__BCLK			0x068 0x000 0x000 0x00 0x000
 #define MX25_PAD_BCLK__GPIO_4_4			0x068 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x10 0x000
-#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x14 0x000
-#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x15 0x000
+#define MX25_PAD_RW__RW				0x06c 0x278 0x000 0x00 0x000
+#define MX25_PAD_RW__AUD4_TXFS			0x06c 0x278 0x474 0x04 0x000
+#define MX25_PAD_RW__GPIO_3_25			0x06c 0x278 0x000 0x05 0x000
 
-#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWE_B__NFWE_B			0x070 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWE_B__GPIO_3_26		0x070 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFRE_B__NFRE_B			0x074 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFRE_B__GPIO_3_27		0x074 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFALE__NFALE			0x078 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFALE__GPIO_3_28		0x078 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFCLE__NFCLE			0x07c 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFCLE__GPIO_3_29		0x07c 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x10 0x000
-#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x15 0x000
+#define MX25_PAD_NFWP_B__NFWP_B			0x080 0x000 0x000 0x00 0x000
+#define MX25_PAD_NFWP_B__GPIO_3_30		0x080 0x000 0x000 0x05 0x000
 
-#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x10 0x000
-#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x15 0x000
+#define MX25_PAD_NFRB__NFRB			0x084 0x27c 0x000 0x00 0x000
+#define MX25_PAD_NFRB__GPIO_3_31		0x084 0x27c 0x000 0x05 0x000
 
 #define MX25_PAD_D15__D15			0x088 0x280 0x000 0x00 0x000
 #define MX25_PAD_D15__LD16			0x088 0x280 0x000 0x01 0x000
 #define MX25_PAD_D15__GPIO_4_5			0x088 0x280 0x000 0x05 0x000
-#define MX25_PAD_D15__SDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
+#define MX25_PAD_D15__ESDHC1_DAT7		0x088 0x280 0x4d8 0x06 0x000
 
 #define MX25_PAD_D14__D14			0x08c 0x284 0x000 0x00 0x000
 #define MX25_PAD_D14__LD17			0x08c 0x284 0x000 0x01 0x000
 #define MX25_PAD_D14__GPIO_4_6			0x08c 0x284 0x000 0x05 0x000
-#define MX25_PAD_D14__SDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
+#define MX25_PAD_D14__ESDHC1_DAT6		0x08c 0x284 0x4d4 0x06 0x000
 
 #define MX25_PAD_D13__D13			0x090 0x288 0x000 0x00 0x000
 #define MX25_PAD_D13__LD18			0x090 0x288 0x000 0x01 0x000
 #define MX25_PAD_D13__GPIO_4_7			0x090 0x288 0x000 0x05 0x000
-#define MX25_PAD_D13__SDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
+#define MX25_PAD_D13__ESDHC1_DAT5		0x090 0x288 0x4d0 0x06 0x000
 
 #define MX25_PAD_D12__D12			0x094 0x28c 0x000 0x00 0x000
 #define MX25_PAD_D12__GPIO_4_8			0x094 0x28c 0x000 0x05 0x000
-#define MX25_PAD_D12__SDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
+#define MX25_PAD_D12__ESDHC1_DAT4		0x094 0x28c 0x4cc 0x06 0x000
 
 #define MX25_PAD_D11__D11			0x098 0x290 0x000 0x00 0x000
 #define MX25_PAD_D11__GPIO_4_9			0x098 0x290 0x000 0x05 0x000
@@ -210,363 +210,414 @@
 #define MX25_PAD_D0__D0				0x0c4 0x2bc 0x000 0x00 0x000
 #define MX25_PAD_D0__GPIO_4_20			0x0c4 0x2bc 0x000 0x05 0x000
 
-#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x10 0x000
-#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x12 0x000
-#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x15 0x000
+#define MX25_PAD_LD0__LD0			0x0c8 0x2c0 0x000 0x00 0x000
+#define MX25_PAD_LD0__CSI_D0			0x0c8 0x2c0 0x488 0x02 0x000
+#define MX25_PAD_LD0__GPIO_2_15			0x0c8 0x2c0 0x000 0x05 0x000
 
-#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x10 0x000
-#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x12 0x000
-#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x15 0x000
+#define MX25_PAD_LD1__LD1			0x0cc 0x2c4 0x000 0x00 0x000
+#define MX25_PAD_LD1__CSI_D1			0x0cc 0x2c4 0x48c 0x02 0x000
+#define MX25_PAD_LD1__GPIO_2_16			0x0cc 0x2c4 0x000 0x05 0x000
 
-#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x10 0x000
-#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x15 0x000
+#define MX25_PAD_LD2__LD2			0x0d0 0x2c8 0x000 0x00 0x000
+#define MX25_PAD_LD2__GPIO_2_17			0x0d0 0x2c8 0x000 0x05 0x000
 
-#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x10 0x000
-#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x15 0x000
+#define MX25_PAD_LD3__LD3			0x0d4 0x2cc 0x000 0x00 0x000
+#define MX25_PAD_LD3__GPIO_2_18			0x0d4 0x2cc 0x000 0x05 0x000
 
-#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x10 0x000
-#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x15 0x000
+#define MX25_PAD_LD4__LD4			0x0d8 0x2d0 0x000 0x00 0x000
+#define MX25_PAD_LD4__GPIO_2_19			0x0d8 0x2d0 0x000 0x05 0x000
 
-#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x10 0x000
-#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x15 0x000
+#define MX25_PAD_LD5__LD5			0x0dc 0x2d4 0x000 0x00 0x000
+#define MX25_PAD_LD5__GPIO_1_19			0x0dc 0x2d4 0x000 0x05 0x000
 
-#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x10 0x000
-#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x15 0x000
+#define MX25_PAD_LD6__LD6			0x0e0 0x2d8 0x000 0x00 0x000
+#define MX25_PAD_LD6__GPIO_1_20			0x0e0 0x2d8 0x000 0x05 0x000
 
-#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x10 0x000
-#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x15 0x000
+#define MX25_PAD_LD7__LD7			0x0e4 0x2dc 0x000 0x00 0x000
+#define MX25_PAD_LD7__GPIO_1_21			0x0e4 0x2dc 0x000 0x05 0x000
 
-#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x10 0x000
-#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x15 0x000
-#define MX25_PAD_LD8__SDHC2_CMD			0x0e8 0x2e0 0x4e0 0x06 0x000
+#define MX25_PAD_LD8__LD8			0x0e8 0x2e0 0x000 0x00 0x000
+#define MX25_PAD_LD8__UART4_RXD			0x0e8 0x2e0 0x570 0x02 0x000
+#define MX25_PAD_LD8__FEC_TX_ERR		0x0e8 0x2e0 0x000 0x05 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_LD8__ESDHC2_CMD		0x0e8 0x2e0 0x4e0 0x16 0x000
 
-#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x10 0x000
-#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x15 0x001
-#define MX25_PAD_LD9__SDHC2_CLK			0x0ec 0x2e4 0x4dc 0x06 0x000
+#define MX25_PAD_LD9__LD9			0x0ec 0x2e4 0x000 0x00 0x000
+#define MX25_PAD_LD9__UART4_TXD			0x0ec 0x2e4 0x000 0x02 0x000
+#define MX25_PAD_LD9__FEC_COL			0x0ec 0x2e4 0x504 0x05 0x001
+#define MX25_PAD_LD9__ESDHC2_CLK		0x0ec 0x2e4 0x4dc 0x06 0x000
 
-#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x10 0x000
-#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x15 0x001
+#define MX25_PAD_LD10__LD10			0x0f0 0x2e8 0x000 0x00 0x000
+#define MX25_PAD_LD10__UART4_RTS		0x0f0 0x2e8 0x56c 0x02 0x000
+#define MX25_PAD_LD10__FEC_RX_ERR		0x0f0 0x2e8 0x518 0x05 0x001
 
-#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x10 0x000
-#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x15 0x001
-#define MX25_PAD_LD11__SDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
+#define MX25_PAD_LD11__LD11			0x0f4 0x2ec 0x000 0x00 0x000
+#define MX25_PAD_LD11__UART4_CTS		0x0f4 0x2ec 0x000 0x02 0x000
+#define MX25_PAD_LD11__FEC_RDATA2		0x0f4 0x2ec 0x50c 0x05 0x001
+#define MX25_PAD_LD11__ESDHC2_DAT1		0x0f4 0x2ec 0x4e8 0x06 0x000
 
-#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x10 0x000
+#define MX25_PAD_LD12__LD12			0x0f8 0x2f0 0x000 0x00 0x000
 #define MX25_PAD_LD12__CSPI2_MOSI		0x0f8 0x2f0 0x4a0 0x02 0x000
-#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x15 0x001
+#define MX25_PAD_LD12__KPP_ROW6			0x0f8 0x2f0 0x544 0x04 0x000
+#define MX25_PAD_LD12__FEC_RDATA3		0x0f8 0x2f0 0x510 0x05 0x001
 
-#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x10 0x000
+#define MX25_PAD_LD13__LD13			0x0fc 0x2f4 0x000 0x00 0x000
 #define MX25_PAD_LD13__CSPI2_MISO		0x0fc 0x2f4 0x49c 0x02 0x000
-#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x15 0x000
+#define MX25_PAD_LD13__KPP_ROW7			0x0fc 0x2f4 0x548 0x04 0x000
+#define MX25_PAD_LD13__FEC_TDATA2		0x0fc 0x2f4 0x000 0x05 0x000
 
-#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x10 0x000
+#define MX25_PAD_LD14__LD14			0x100 0x2f8 0x000 0x00 0x000
 #define MX25_PAD_LD14__CSPI2_SCLK		0x100 0x2f8 0x494 0x02 0x000
-#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x15 0x000
+#define MX25_PAD_LD14__FEC_TDATA3		0x100 0x2f8 0x000 0x05 0x000
 
-#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x10 0x000
+#define MX25_PAD_LD15__LD15			0x104 0x2fc 0x000 0x00 0x000
 #define MX25_PAD_LD15__CSPI2_RDY		0x104 0x2fc 0x498 0x02 0x000
-#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x15 0x001
+#define MX25_PAD_LD15__FEC_RX_CLK		0x104 0x2fc 0x514 0x05 0x001
 
-#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x10 0x000
-#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x15 0x000
+#define MX25_PAD_HSYNC__HSYNC			0x108 0x300 0x000 0x00 0x000
+#define MX25_PAD_HSYNC__GPIO_1_22		0x108 0x300 0x000 0x05 0x000
 
-#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x10 0x000
-#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x15 0x000
+#define MX25_PAD_VSYNC__VSYNC			0x10c 0x304 0x000 0x00 0x000
+#define MX25_PAD_VSYNC__GPIO_1_23		0x10c 0x304 0x000 0x05 0x000
 
-#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x10 0x000
-#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x15 0x000
+#define MX25_PAD_LSCLK__LSCLK			0x110 0x308 0x000 0x00 0x000
+#define MX25_PAD_LSCLK__GPIO_1_24		0x110 0x308 0x000 0x05 0x000
 
-#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x10 0x000
+#define MX25_PAD_OE_ACD__OE_ACD			0x114 0x30c 0x000 0x00 0x000
 #define MX25_PAD_OE_ACD__CSPI2_SS0		0x114 0x30c 0x4a4 0x02 0x000
-#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x15 0x000
+#define MX25_PAD_OE_ACD__GPIO_1_25		0x114 0x30c 0x000 0x05 0x000
 
-#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x10 0x000
-#define MX25_PAD_CONTRAST__CC4			0x118 0x310 0x000 0x11 0x000
-#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x14 0x000
-#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x15 0x001
+#define MX25_PAD_CONTRAST__CONTRAST		0x118 0x310 0x000 0x00 0x000
+#define MX25_PAD_CONTRAST__GPT4_CAPIN1		0x118 0x310 0x000 0x01 0x000
+#define MX25_PAD_CONTRAST__CSPI2_SS1		0x118 0x310 0x4a8 0x02 0x000
+#define MX25_PAD_CONTRAST__PWM4_PWMO		0x118 0x310 0x000 0x04 0x000
+#define MX25_PAD_CONTRAST__FEC_CRS		0x118 0x310 0x508 0x05 0x001
+#define MX25_PAD_CONTRAST__USBH2_PWR		0x118 0x310 0x000 0x06 0x000
 
-#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x10 0x000
-#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x15 0x000
-#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x16 0x001
+#define MX25_PAD_PWM__PWM			0x11c 0x314 0x000 0x00 0x000
+#define MX25_PAD_PWM__GPIO_1_26			0x11c 0x314 0x000 0x05 0x000
+#define MX25_PAD_PWM__USBH2_OC			0x11c 0x314 0x580 0x06 0x001
 
-#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x10 0x000
-#define MX25_PAD_CSI_D2__UART5_RXD_MUX		0x120 0x318 0x578 0x11 0x001
+#define MX25_PAD_CSI_D2__CSI_D2			0x120 0x318 0x000 0x00 0x000
+#define MX25_PAD_CSI_D2__UART5_RXD		0x120 0x318 0x578 0x01 0x001
 #define MX25_PAD_CSI_D2__SIM1_CLK0		0x120 0x318 0x000 0x04 0x000
-#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x15 0x000
-#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x000 0x17 0x000
+#define MX25_PAD_CSI_D2__GPIO_1_27		0x120 0x318 0x000 0x05 0x000
+#define MX25_PAD_CSI_D2__CSPI3_MOSI		0x120 0x318 0x4b8 0x07 0x001
 
-#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D3__UART5_TXD_MUX		0x124 0x31c 0x000 0x11 0x000
+#define MX25_PAD_CSI_D3__CSI_D3			0x124 0x31c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D3__UART5_TXD		0x124 0x31c 0x000 0x01 0x000
 #define MX25_PAD_CSI_D3__SIM1_RST0		0x124 0x31c 0x000 0x04 0x000
-#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x15 0x000
-#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x17 0x001
+#define MX25_PAD_CSI_D3__GPIO_1_28		0x124 0x31c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D3__CSPI3_MISO		0x124 0x31c 0x4b4 0x07 0x001
 
-#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x10 0x000
-#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x11 0x001
+#define MX25_PAD_CSI_D4__CSI_D4			0x128 0x320 0x000 0x00 0x000
+#define MX25_PAD_CSI_D4__UART5_RTS		0x128 0x320 0x574 0x01 0x001
 #define MX25_PAD_CSI_D4__SIM1_VEN0		0x128 0x320 0x000 0x04 0x000
-#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x15 0x000
-#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x000 0x17 0x000
+#define MX25_PAD_CSI_D4__GPIO_1_29		0x128 0x320 0x000 0x05 0x000
+#define MX25_PAD_CSI_D4__CSPI3_SCLK		0x128 0x320 0x4ac 0x07 0x001
 
-#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x10 0x000
-#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x11 0x000
+#define MX25_PAD_CSI_D5__CSI_D5			0x12c 0x324 0x000 0x00 0x000
+#define MX25_PAD_CSI_D5__UART5_CTS		0x12c 0x324 0x000 0x01 0x000
 #define MX25_PAD_CSI_D5__SIM1_TX0		0x12c 0x324 0x000 0x04 0x000
-#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x15 0x000
-#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x000 0x17 0x000
+#define MX25_PAD_CSI_D5__GPIO_1_30		0x12c 0x324 0x000 0x05 0x000
+#define MX25_PAD_CSI_D5__CSPI3_RDY		0x12c 0x324 0x4b0 0x07 0x001
 
-#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x10 0x000
-#define MX25_PAD_CSI_D6__SDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
+#define MX25_PAD_CSI_D6__CSI_D6			0x130 0x328 0x000 0x00 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_CSI_D6__ESDHC2_CMD		0x130 0x328 0x4e0 0x12 0x001
 #define MX25_PAD_CSI_D6__SIM1_PD0		0x130 0x328 0x000 0x04 0x000
-#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x10 0x000
-#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		0x134 0x32C 0x4dc 0x12 0x001
-#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x10 0x000
-#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x12 0x000
-#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x15 0x000
-#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x17 0x000
-
-#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x10 0x000
-#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x12 0x000
-#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x15 0x000
-#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x17 0x000
-
-#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x10 0x000
-#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x11 0x000
-#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		0x140 0x338 0x4e4 0x12 0x001
-#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x10 0x000
-#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x11 0x000
-#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		0x144 0x33c 0x4e8 0x12 0x001
-#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x10 0x000
-#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x11 0x000
-#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		0x148 0x340 0x4ec 0x12 0x001
-#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x15 0x000
-
-#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x10 0x000
-#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x11 0x000
-#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		0x14c 0x344 0x4f0 0x12 0x001
-#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x10 0x000
-#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x15 0x000
-
-#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x10 0x000
-#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x11 0x001
-#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x12 0x000
-#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x15 0x000
-
-#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x10 0x000
-#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x10 0x000
-#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x10 0x000
-#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x10 0x000
-#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x11 0x001
-#define MX25_PAD_UART1_RTS__CC3			0x178 0x370 0x000 0x12 0x000
-#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x15 0x000
-
-#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x10 0x000
-#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x11 0x001
-#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x10 0x000
-#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x10 0x000
-#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x10 0x000
-#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x12 0x002
-#define MX25_PAD_UART2_RTS__CC1			0x188 0x380 0x000 0x13 0x000
-#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x15 0x000
-
-#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x10 0x000
-#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x12 0x002
-#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_CMD__SD1_CMD		0x190 0x388 0x000 0x10 0x000
-#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x11 0x001
-#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x12 0x002
-#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_CLK__SD1_CLK		0x194 0x38c 0x000 0x10 0x000
-#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x11 0x001
-#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x12 0x002
-#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA0__SD1_DATA0		0x198 0x390 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x11 0x001
-#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA1__SD1_DATA1		0x19c 0x394 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x13 0x000
-#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA2__SD1_DATA2		0x1a0 0x398 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x12 0x002
-#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x15 0x000
-
-#define MX25_PAD_SD1_DATA3__SD1_DATA3		0x1a4 0x39c 0x000 0x10 0x000
-#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x12 0x002
-#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x13 0x002
-#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x10 0x000
-#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x13 0x002
-#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL0__UART4_RXD_MUX	0x1b8 0x3b0 0x570 0x11 0x001
-#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x15 0x000
+#define MX25_PAD_CSI_D6__GPIO_1_31		0x130 0x328 0x000 0x05 0x000
+#define MX25_PAD_CSI_D6__CSPI3_SS0		0x130 0x328 0x4bc 0x07 0x001
+
+#define MX25_PAD_CSI_D7__CSI_D7			0x134 0x32c 0x000 0x00 0x000
+#define MX25_PAD_CSI_D7__ESDHC2_CLK		0x134 0x32C 0x4dc 0x02 0x001
+#define MX25_PAD_CSI_D7__GPIO_1_6		0x134 0x32c 0x000 0x05 0x000
+#define MX25_PAD_CSI_D7__CSPI3_SS1		0x134 0x32c 0x4c0 0x07 0x001
+
+#define MX25_PAD_CSI_D8__CSI_D8			0x138 0x330 0x000 0x00 0x000
+#define MX25_PAD_CSI_D8__AUD6_RXC		0x138 0x330 0x000 0x02 0x000
+#define MX25_PAD_CSI_D8__GPIO_1_7		0x138 0x330 0x000 0x05 0x000
+#define MX25_PAD_CSI_D8__CSPI3_SS2		0x138 0x330 0x4c4 0x07 0x000
+
+#define MX25_PAD_CSI_D9__CSI_D9			0x13c 0x334 0x000 0x00 0x000
+#define MX25_PAD_CSI_D9__AUD6_RXFS		0x13c 0x334 0x000 0x02 0x000
+#define MX25_PAD_CSI_D9__GPIO_4_21		0x13c 0x334 0x000 0x05 0x000
+#define MX25_PAD_CSI_D9__CSPI3_SS3		0x13c 0x334 0x4c8 0x07 0x000
+
+#define MX25_PAD_CSI_MCLK__CSI_MCLK		0x140 0x338 0x000 0x00 0x000
+#define MX25_PAD_CSI_MCLK__AUD6_TXD		0x140 0x338 0x000 0x01 0x000
+#define MX25_PAD_CSI_MCLK__ESDHC2_DAT0		0x140 0x338 0x4e4 0x02 0x001
+#define MX25_PAD_CSI_MCLK__GPIO_1_8		0x140 0x338 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_VSYNC__CSI_VSYNC		0x144 0x33c 0x000 0x00 0x000
+#define MX25_PAD_CSI_VSYNC__AUD6_RXD		0x144 0x33c 0x000 0x01 0x000
+#define MX25_PAD_CSI_VSYNC__ESDHC2_DAT1		0x144 0x33c 0x4e8 0x02 0x001
+#define MX25_PAD_CSI_VSYNC__GPIO_1_9		0x144 0x33c 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_HSYNC__CSI_HSYNC		0x148 0x340 0x000 0x00 0x000
+#define MX25_PAD_CSI_HSYNC__AUD6_TXC		0x148 0x340 0x000 0x01 0x000
+#define MX25_PAD_CSI_HSYNC__ESDHC2_DAT2		0x148 0x340 0x4ec 0x02 0x001
+#define MX25_PAD_CSI_HSYNC__GPIO_1_10		0x148 0x340 0x000 0x05 0x000
+
+#define MX25_PAD_CSI_PIXCLK__CSI_PIXCLK		0x14c 0x344 0x000 0x00 0x000
+#define MX25_PAD_CSI_PIXCLK__AUD6_TXFS		0x14c 0x344 0x000 0x01 0x000
+#define MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3	0x14c 0x344 0x4f0 0x02 0x001
+#define MX25_PAD_CSI_PIXCLK__GPIO_1_11		0x14c 0x344 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_CLK__I2C1_CLK		0x150 0x348 0x000 0x00 0x000
+#define MX25_PAD_I2C1_CLK__GPIO_1_12		0x150 0x348 0x000 0x05 0x000
+
+#define MX25_PAD_I2C1_DAT__I2C1_DAT		0x154 0x34c 0x000 0x00 0x000
+#define MX25_PAD_I2C1_DAT__GPIO_1_13		0x154 0x34c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MOSI__CSPI1_MOSI		0x158 0x350 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MOSI__UART3_RXD		0x158 0x350 0x568 0x02 0x000
+#define MX25_PAD_CSPI1_MOSI__GPIO_1_14		0x158 0x350 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_MISO__CSPI1_MISO		0x15c 0x354 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_MISO__UART3_TXD		0x15c 0x354 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_MISO__GPIO_1_15		0x15c 0x354 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS0__CSPI1_SS0		0x160 0x358 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS0__PWM2_PWMO		0x160 0x358 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS0__GPIO_1_16		0x160 0x358 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SS1__CSPI1_SS1		0x164 0x35c 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SS1__I2C3_DAT		0x164 0x35C 0x528 0x01 0x001
+#define MX25_PAD_CSPI1_SS1__UART3_RTS		0x164 0x35c 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SS1__GPIO_1_17		0x164 0x35c 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_SCLK__CSPI1_SCLK		0x168 0x360 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_SCLK__UART3_CTS		0x168 0x360 0x000 0x02 0x000
+#define MX25_PAD_CSPI1_SCLK__GPIO_1_18		0x168 0x360 0x000 0x05 0x000
+
+#define MX25_PAD_CSPI1_RDY__CSPI1_RDY		0x16c 0x364 0x000 0x00 0x000
+#define MX25_PAD_CSPI1_RDY__GPIO_2_22		0x16c 0x364 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RXD__UART1_RXD		0x170 0x368 0x000 0x00 0x000
+#define MX25_PAD_UART1_RXD__UART2_DTR		0x170 0x368 0x000 0x03 0x000
+#define MX25_PAD_UART1_RXD__GPIO_4_22		0x170 0x368 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_TXD__UART1_TXD		0x174 0x36c 0x000 0x00 0x000
+#define MX25_PAD_UART1_TXD__UART2_DSR		0x174 0x36c 0x000 0x03 0x000
+#define MX25_PAD_UART1_TXD__GPIO_4_23		0x174 0x36c 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_RTS__UART1_RTS		0x178 0x370 0x000 0x00 0x000
+#define MX25_PAD_UART1_RTS__CSI_D0		0x178 0x370 0x488 0x01 0x001
+#define MX25_PAD_UART1_RTS__GPT3_CAPIN1		0x178 0x370 0x000 0x02 0x000
+#define MX25_PAD_UART1_RTS__UART2_DCD		0x178 0x370 0x000 0x03 0x000
+#define MX25_PAD_UART1_RTS__GPIO_4_24		0x178 0x370 0x000 0x05 0x000
+
+#define MX25_PAD_UART1_CTS__UART1_CTS		0x17c 0x374 0x000 0x00 0x000
+#define MX25_PAD_UART1_CTS__CSI_D1		0x17c 0x374 0x48c 0x01 0x001
+#define MX25_PAD_UART1_CTS__UART2_RI		0x17c 0x374 0x000 0x03 0x001
+#define MX25_PAD_UART1_CTS__GPIO_4_25		0x17c 0x374 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RXD__UART2_RXD		0x180 0x378 0x000 0x00 0x000
+#define MX25_PAD_UART2_RXD__GPIO_4_26		0x180 0x378 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_TXD__UART2_TXD		0x184 0x37c 0x000 0x00 0x000
+#define MX25_PAD_UART2_TXD__GPIO_4_27		0x184 0x37c 0x000 0x05 0x000
+
+#define MX25_PAD_UART2_RTS__UART2_RTS		0x188 0x380 0x000 0x00 0x000
+#define MX25_PAD_UART2_RTS__FEC_COL		0x188 0x380 0x504 0x02 0x002
+#define MX25_PAD_UART2_RTS__GPT1_CAPIN1		0x188 0x380 0x000 0x03 0x000
+#define MX25_PAD_UART2_RTS__GPIO_4_28		0x188 0x380 0x000 0x05 0x000
+#define MX25_PAD_UART2_RTS__CSPI2_SS3		0x188 0x380 0x000 0x06 0x000
+
+#define MX25_PAD_UART2_CTS__UART2_CTS		0x18c 0x384 0x000 0x00 0x000
+#define MX25_PAD_UART2_CTS__FEC_RX_ERR		0x18c 0x384 0x518 0x02 0x002
+#define MX25_PAD_UART2_CTS__GPIO_4_29		0x18c 0x384 0x000 0x05 0x000
+#define MX25_PAD_UART2_CTS__CSPI3_SS3		0x18c 0x384 0x4c8 0x06 0x001
 
-#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL1__UART4_TXD_MUX	0x1bc 0x3b4 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x15 0x000
-
-#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x10 0x000
-#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x11 0x000
-#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x12 0x000
-#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x12 0x001
-#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x10 0x000
-#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x12 0x001
-#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x10 0x000
-#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x12 0x001
-#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x10 0x000
-#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x10 0x000
+/*
+ * Removing the SION bit from MX25_PAD_*__ESDHCn_CMD breaks detecting an SD
+ * card. According to the i.MX25 reference manual (e.g. Figure 23-2 in IMX25RM
+ * Rev. 2 from 01/2011) this pin is bidirectional. So it seems to be a silicon
+ * bug that configuring the ESDHCn_CMD function doesn't enable the input path
+ * for this pin.
+ * This might have side effects for other hardware units that are connected to
+ * that pin and use the respective function as input.
+ */
+#define MX25_PAD_SD1_CMD__ESDHC1_CMD		0x190 0x388 0x000 0x10 0x000
+#define MX25_PAD_SD1_CMD__CSPI2_MOSI		0x190 0x388 0x4a0 0x01 0x001
+#define MX25_PAD_SD1_CMD__FEC_RDATA2		0x190 0x388 0x50c 0x02 0x002
+#define MX25_PAD_SD1_CMD__GPIO_2_23		0x190 0x388 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_CLK__ESDHC1_CLK		0x194 0x38c 0x000 0x00 0x000
+#define MX25_PAD_SD1_CLK__CSPI2_MISO		0x194 0x38c 0x49c 0x01 0x001
+#define MX25_PAD_SD1_CLK__FEC_RDATA3		0x194 0x38c 0x510 0x02 0x002
+#define MX25_PAD_SD1_CLK__GPIO_2_24		0x194 0x38c 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA0__ESDHC1_DAT0		0x198 0x390 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA0__CSPI2_SCLK		0x198 0x390 0x494 0x01 0x001
+#define MX25_PAD_SD1_DATA0__GPIO_2_25		0x198 0x390 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA1__ESDHC1_DAT1		0x19c 0x394 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA1__CSPI2_RDY		0x19c 0x394 0x498 0x01 0x001
+#define MX25_PAD_SD1_DATA1__AUD7_RXD		0x19c 0x394 0x478 0x03 0x000
+#define MX25_PAD_SD1_DATA1__GPIO_2_26		0x19c 0x394 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA2__ESDHC1_DAT2		0x1a0 0x398 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA2__CSPI2_SS0		0x1a0 0x398 0x4a4 0x01 0x001
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK		0x1a0 0x398 0x514 0x02 0x002
+#define MX25_PAD_SD1_DATA2__GPIO_2_27		0x1a0 0x398 0x000 0x05 0x000
+
+#define MX25_PAD_SD1_DATA3__ESDHC1_DAT3		0x1a4 0x39c 0x000 0x00 0x000
+#define MX25_PAD_SD1_DATA3__CSPI2_SS1		0x1a4 0x39c 0x4a8 0x01 0x001
+#define MX25_PAD_SD1_DATA3__FEC_CRS		0x1a4 0x39c 0x508 0x02 0x002
+#define MX25_PAD_SD1_DATA3__GPIO_2_28		0x1a4 0x39c 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW0__KPP_ROW0		0x1a8 0x3a0 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW0__UART3_RXD		0x1a8 0x3a0 0x568 0x01 0x001
+#define MX25_PAD_KPP_ROW0__UART1_DTR		0x1a8 0x3a0 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW0__GPIO_2_29		0x1a8 0x3a0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW1__KPP_ROW1		0x1ac 0x3a4 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW1__UART3_TXD		0x1ac 0x3a4 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW1__UART1_DSR		0x1ac 0x3a4 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW1__GPIO_2_30		0x1ac 0x3a4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW2__KPP_ROW2		0x1b0 0x3a8 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW2__UART3_RTS		0x1b0 0x3a8 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW2__CSI_D0		0x1b0 0x3a8 0x488 0x03 0x002
+#define MX25_PAD_KPP_ROW2__UART1_DCD		0x1b0 0x3a8 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW2__GPIO_2_31		0x1b0 0x3a8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_ROW3__KPP_ROW3		0x1b4 0x3ac 0x000 0x00 0x000
+#define MX25_PAD_KPP_ROW3__UART3_CTS		0x1b4 0x3ac 0x000 0x01 0x000
+#define MX25_PAD_KPP_ROW3__CSI_D1		0x1b4 0x3ac 0x48c 0x03 0x002
+#define MX25_PAD_KPP_ROW3__UART1_RI		0x1b4 0x3ac 0x000 0x04 0x000
+#define MX25_PAD_KPP_ROW3__GPIO_3_0		0x1b4 0x3ac 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL0__KPP_COL0		0x1b8 0x3b0 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL0__UART4_RXD		0x1b8 0x3b0 0x570 0x01 0x001
+#define MX25_PAD_KPP_COL0__AUD5_TXD		0x1b8 0x3b0 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL0__GPIO_3_1		0x1b8 0x3b0 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL1__KPP_COL1		0x1bc 0x3b4 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL1__UART4_TXD		0x1bc 0x3b4 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL1__AUD5_RXD		0x1bc 0x3b4 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL1__GPIO_3_2		0x1bc 0x3b4 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL2__KPP_COL2		0x1c0 0x3b8 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL2__UART4_RTS		0x1c0 0x3b8 0x56c 0x01 0x001
+#define MX25_PAD_KPP_COL2__AUD5_TXC		0x1c0 0x3b8 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL2__GPIO_3_3		0x1c0 0x3b8 0x000 0x05 0x000
+
+#define MX25_PAD_KPP_COL3__KPP_COL3		0x1c4 0x3bc 0x000 0x00 0x000
+#define MX25_PAD_KPP_COL3__UART4_CTS		0x1c4 0x3bc 0x000 0x01 0x000
+#define MX25_PAD_KPP_COL3__AUD5_TXFS		0x1c4 0x3bc 0x000 0x02 0x000
+#define MX25_PAD_KPP_COL3__GPIO_3_4		0x1c4 0x3bc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDC__FEC_MDC		0x1c8 0x3c0 0x000 0x00 0x000
+/* SION must be set; see the comment for MX25_PAD_SD1_CMD__ESDHC1_CMD. */
+#define MX25_PAD_FEC_MDC__ESDHC2_CMD		0x1c8 0x3c0 0x4e0 0x11 0x002
+#define MX25_PAD_FEC_MDC__AUD4_TXD		0x1c8 0x3c0 0x464 0x02 0x001
+#define MX25_PAD_FEC_MDC__GPIO_3_5		0x1c8 0x3c0 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_MDIO__FEC_MDIO		0x1cc 0x3c4 0x000 0x00 0x000
+#define MX25_PAD_FEC_MDIO__AUD4_RXD		0x1cc 0x3c4 0x460 0x02 0x001
+#define MX25_PAD_FEC_MDIO__GPIO_3_6		0x1cc 0x3c4 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0		0x1d0 0x3c8 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA0__GPIO_3_7		0x1d0 0x3c8 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1		0x1d4 0x3cc 0x000 0x00 0x000
+#define MX25_PAD_FEC_TDATA1__AUD4_TXFS		0x1d4 0x3cc 0x474 0x02 0x001
+#define MX25_PAD_FEC_TDATA1__GPIO_3_8		0x1d4 0x3cc 0x000 0x05 0x000
+
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN		0x1d8 0x3d0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_EN__GPIO_3_9		0x1d8 0x3d0 0x000 0x05 0x000
+#define MX25_PAD_FEC_TX_EN__KPP_ROW4		0x1d8 0x3d0 0x53c 0x06 0x000
+
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0		0x1dc 0x3d4 0x000 0x00 0x000
+#define MX25_PAD_FEC_RDATA0__GPIO_3_10		0x1dc 0x3d4 0x000 0x05 0x000
+#define MX25_PAD_FEC_RDATA0__KPP_ROW5 		0x1dc 0x3d4 0x540 0x06 0x000
+
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1		0x1e0 0x3d8 0x000 0x00 0x000
 /*
  * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
  * 01/2011) this is CAN1_TX but that's wrong.
  */
-#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x14 0x000
-#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x15 0x000
+#define MX25_PAD_FEC_RDATA1__CAN2_TX		0x1e0 0x3d8 0x000 0x04 0x000
+#define MX25_PAD_FEC_RDATA1__GPIO_3_11		0x1e0 0x3d8 0x000 0x05 0x000
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x10 0x000
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV		0x1e4 0x3dc 0x000 0x00 0x000
 /*
  * According to the i.MX25 Reference manual (IMX25RM, Rev. 2,
  * 01/2011) this is CAN1_RX but that's wrong.
  */
-#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x14 0x000
-#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x15 0x000
-
-#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x10 0x000
-#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x15 0x000
-
-#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x10 0x000
-#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x11 0x000
-#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x15 0x000
+#define MX25_PAD_FEC_RX_DV__CAN2_RX		0x1e4 0x3dc 0x484 0x04 0x000
+#define MX25_PAD_FEC_RX_DV__GPIO_3_12		0x1e4 0x3dc 0x000 0x05 0x000
 
-#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x10 0x000
-#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x15 0x000
+#define MX25_PAD_FEC_TX_CLK__FEC_TX_CLK		0x1e8 0x3e0 0x000 0x00 0x000
+#define MX25_PAD_FEC_TX_CLK__GPIO_3_13		0x1e8 0x3e0 0x000 0x05 0x000
 
-#define MX25_PAD_GPIO_A__GPIO_A			0x1f4 0x3f0 0x000 0x10 0x000
-#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x16 0x000
-#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x12 0x000
+#define MX25_PAD_RTCK__RTCK			0x1ec 0x3e4 0x000 0x00 0x000
+#define MX25_PAD_RTCK__OWIRE			0x1ec 0x3e4 0x000 0x01 0x000
+#define MX25_PAD_RTCK__GPIO_3_14		0x1ec 0x3e4 0x000 0x05 0x000
 
-#define MX25_PAD_GPIO_B__GPIO_B			0x1f8 0x3f4 0x000 0x10 0x000
-#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x12 0x001
-#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x16 0x001
-
-#define MX25_PAD_GPIO_C__GPIO_C			0x1fc 0x3f8 0x000 0x10 0x000
-#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x11 0x000
-#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x12 0x001
-#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x13 0x001
-#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x16 0x000
-
-#define MX25_PAD_GPIO_D__GPIO_D			0x200 0x3fc 0x000 0x10 0x000
-#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x12 0x001
-#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x16 0x001
-
-#define MX25_PAD_GPIO_E__GPIO_E			0x204 0x400 0x000 0x10 0x000
-#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x11 0x002
-#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x12 0x000
-#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x14 0x000
-#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x16 0x002
-
-#define MX25_PAD_GPIO_F__GPIO_F			0x208 0x404 0x000 0x10 0x000
-#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x12 0x000
-#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x14 0x000
-#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x16 0x000
-
-#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x10 0x000
-#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x10 0x000
-#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x15 0x000
-
-#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x14 0x000
-#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x15 0x000
-
-#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x10 0x000
-#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x15 0x000
-
-#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x10 0x000
-#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x14 0x001
-#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x15 0x000
+#define MX25_PAD_TDO__TDO			0x000 0x3e8 0x000 0x00 0x000
 
-#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x10 0x000
-#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x15 0x000
+#define MX25_PAD_DE_B__DE_B			0x1f0 0x3ec 0x000 0x00 0x000
+#define MX25_PAD_DE_B__GPIO_2_20		0x1f0 0x3ec 0x000 0x05 0x000
+
+#define MX25_PAD_GPIO_A__GPIO_1_0		0x1f4 0x3f0 0x000 0x00 0x000
+#define MX25_PAD_GPIO_A__CAN1_TX		0x1f4 0x3f0 0x000 0x06 0x000
+#define MX25_PAD_GPIO_A__USBOTG_PWR		0x1f4 0x3f0 0x000 0x02 0x000
+
+#define MX25_PAD_GPIO_B__GPIO_1_1		0x1f8 0x3f4 0x000 0x00 0x000
+#define MX25_PAD_GPIO_B__USBOTG_OC		0x1f8 0x3f4 0x57c 0x02 0x001
+#define MX25_PAD_GPIO_B__CAN1_RX		0x1f8 0x3f4 0x480 0x06 0x001
+
+#define MX25_PAD_GPIO_C__GPIO_1_2		0x1fc 0x3f8 0x000 0x00 0x000
+#define MX25_PAD_GPIO_C__PWM4_PWMO		0x1fc 0x3f8 0x000 0x01 0x000
+#define MX25_PAD_GPIO_C__I2C2_SCL		0x1fc 0x3f8 0x51c 0x02 0x001
+#define MX25_PAD_GPIO_C__KPP_COL4		0x1fc 0x3f8 0x52c 0x03 0x001
+#define MX25_PAD_GPIO_C__GPT2_CAPIN1		0x1fc 0x3f8 0x000 0x04 0x000
+#define MX25_PAD_GPIO_C__CSPI1_SS2		0x1fc 0x3f8 0x000 0x05 0x000
+#define MX25_PAD_GPIO_C__CAN2_TX		0x1fc 0x3f8 0x000 0x06 0x000
+#define MX25_PAD_GPIO_C__CSPI2_SS2		0x1fc 0x3f8 0x000 0x07 0x000
+
+#define MX25_PAD_GPIO_D__GPIO_1_3		0x200 0x3fc 0x000 0x00 0x000
+#define MX25_PAD_GPIO_D__I2C2_SDA		0x200 0x3fc 0x520 0x02 0x001
+#define MX25_PAD_GPIO_D__CAN2_RX		0x200 0x3fc 0x484 0x06 0x001
+#define MX25_PAD_GPIO_D__CSPI3_SS2		0x200 0x3fc 0x4c4 0x07 0x001
+
+#define MX25_PAD_GPIO_E__GPIO_1_4		0x204 0x400 0x000 0x00 0x000
+#define MX25_PAD_GPIO_E__I2C3_CLK		0x204 0x400 0x524 0x01 0x002
+#define MX25_PAD_GPIO_E__LD16			0x204 0x400 0x000 0x02 0x000
+#define MX25_PAD_GPIO_E__AUD7_TXD		0x204 0x400 0x000 0x04 0x000
+#define MX25_PAD_GPIO_E__UART4_RXD		0x204 0x400 0x570 0x06 0x002
+
+#define MX25_PAD_GPIO_F__GPIO_1_5		0x208 0x404 0x000 0x00 0x000
+#define MX25_PAD_GPIO_F__LD17			0x208 0x404 0x000 0x02 0x000
+#define MX25_PAD_GPIO_F__AUD7_TXC		0x208 0x404 0x000 0x04 0x000
+#define MX25_PAD_GPIO_F__UART4_TXD		0x208 0x404 0x000 0x06 0x000
+
+#define MX25_PAD_EXT_ARMCLK__EXT_ARMCLK		0x20c 0x000 0x000 0x00 0x000
+#define MX25_PAD_EXT_ARMCLK__GPIO_3_15		0x20c 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_UPLL_BYPCLK__UPLL_BYPCLK	0x210 0x000 0x000 0x00 0x000
+#define MX25_PAD_UPLL_BYPCLK__GPIO_3_16		0x210 0x000 0x000 0x05 0x000
+
+#define MX25_PAD_VSTBY_REQ__VSTBY_REQ		0x214 0x408 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_REQ__AUD7_TXFS		0x214 0x408 0x000 0x04 0x000
+#define MX25_PAD_VSTBY_REQ__GPIO_3_17		0x214 0x408 0x000 0x05 0x000
+#define MX25_PAD_VSTBY_REQ__UART4_RTS		0x214 0x408 0x56c 0x06 0x002
+
+#define MX25_PAD_VSTBY_ACK__VSTBY_ACK		0x218 0x40c 0x000 0x00 0x000
+#define MX25_PAD_VSTBY_ACK__CSPI1_SS3		0x218 0x40c 0x490 0x02 0x001
+#define MX25_PAD_VSTBY_ACK__GPIO_3_18		0x218 0x40c 0x000 0x05 0x000
+
+#define MX25_PAD_POWER_FAIL__POWER_FAIL		0x21c 0x410 0x000 0x00 0x000
+#define MX25_PAD_POWER_FAIL__AUD7_RXD		0x21c 0x410 0x478 0x04 0x001
+#define MX25_PAD_POWER_FAIL__GPIO_3_19		0x21c 0x410 0x000 0x05 0x000
+#define MX25_PAD_POWER_FAIL__UART4_CTS		0x21c 0x410 0x000 0x06 0x000
+
+#define MX25_PAD_CLKO__CLKO			0x220 0x414 0x000 0x00 0x000
+#define MX25_PAD_CLKO__GPIO_2_21		0x220 0x414 0x000 0x05 0x000
 
 #define MX25_PAD_BOOT_MODE0__BOOT_MODE0		0x224 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE0__GPIO_4_30		0x224 0x000 0x000 0x05 0x000
@@ -574,4 +625,28 @@
 #define MX25_PAD_BOOT_MODE1__BOOT_MODE1		0x228 0x000 0x000 0x00 0x000
 #define MX25_PAD_BOOT_MODE1__GPIO_4_31		0x228 0x000 0x000 0x05 0x000
 
+/*
+ * Compatibility defines for out-of-tree users. You should update if you make
+ * use of one of them.
+ */
+#define MX25_PAD_D15__SDHC1_DAT7		MX25_PAD_D15__ESDHC1_DAT7
+#define MX25_PAD_D14__SDHC1_DAT6		MX25_PAD_D14__ESDHC1_DAT6
+#define MX25_PAD_D13__SDHC1_DAT5		MX25_PAD_D13__ESDHC1_DAT5
+#define MX25_PAD_D12__SDHC1_DAT4		MX25_PAD_D12__ESDHC1_DAT4
+#define MX25_PAD_LD8__SDHC2_CMD			MX25_PAD_LD8__ESDHC2_CMD
+#define MX25_PAD_LD9__SDHC2_CLK			MX25_PAD_LD9__ESDHC2_CLK
+#define MX25_PAD_LD11__SDHC2_DAT1		MX25_PAD_LD11__ESDHC2_DAT1
+#define MX25_PAD_CSI_D6__SDHC2_CMD		MX25_PAD_CSI_D6__ESDHC2_CMD
+#define MX25_PAD_CSI_D7__SDHC2_DAT_CLK		MX25_PAD_CSI_D7__ESDHC2_CLK
+#define MX25_PAD_CSI_MCLK__SDHC2_DAT0		MX25_PAD_CSI_MCLK__ESDHC2_DAT0
+#define MX25_PAD_CSI_VSYNC__SDHC2_DAT1		MX25_PAD_CSI_VSYNC__ESDHC2_DAT1
+#define MX25_PAD_CSI_HSYNC__SDHC2_DAT2		MX25_PAD_CSI_HSYNC__ESDHC2_DAT2
+#define MX25_PAD_CSI_PIXCLK__SDHC2_DAT3		MX25_PAD_CSI_PIXCLK__ESDHC2_DAT3
+#define MX25_PAD_SD1_CMD__SD1_CMD		MX25_PAD_SD1_CMD__ESDHC1_CMD
+#define MX25_PAD_SD1_CLK__SD1_CLK		MX25_PAD_SD1_CLK__ESDHC1_CLK
+#define MX25_PAD_SD1_DATA0__SD1_DATA0		MX25_PAD_SD1_DATA0__ESDHC1_DAT0
+#define MX25_PAD_SD1_DATA1__SD1_DATA1		MX25_PAD_SD1_DATA1__ESDHC1_DAT1
+#define MX25_PAD_SD1_DATA2__SD1_DATA2		MX25_PAD_SD1_DATA2__ESDHC1_DAT2
+#define MX25_PAD_SD1_DATA3__SD1_DATA3		MX25_PAD_SD1_DATA3__ESDHC1_DAT3
+
 #endif /* __DTS_IMX25_PINFUNC_H */
diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi
index 677f81d9dcd5..5f90d72b840b 100644
--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -1,18 +1,20 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
 #include "imx25-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -24,6 +26,10 @@
 		i2c2 = &i2c3;
 		mmc0 = &esdhc1;
 		mmc1 = &esdhc2;
+		pwm0 = &pwm1;
+		pwm1 = &pwm2;
+		pwm2 = &pwm3;
+		pwm3 = &pwm4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -37,12 +43,13 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -54,30 +61,32 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&asic>;
 		ranges;
 
-		aips@43f00000 { /* AIPS1 */
+		bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x43f00000 0x100000>;
 			ranges;
 
+			aips1: bridge@43f00000 {
+				compatible = "fsl,imx25-aips";
+				reg = <0x43f00000 0x4000>;
+			};
+
 			i2c1: i2c@43f80000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -101,7 +110,7 @@
 			};
 
 			can1: can@43f88000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx25-flexcan";
 				reg = <0x43f88000 0x4000>;
 				interrupts = <43>;
 				clocks = <&clks 75>, <&clks 75>;
@@ -110,7 +119,7 @@
 			};
 
 			can2: can@43f8c000 {
-				compatible = "fsl,imx25-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx25-flexcan";
 				reg = <0x43f8c000 0x4000>;
 				interrupts = <44>;
 				clocks = <&clks 76>, <&clks 76>;
@@ -157,7 +166,7 @@
 				status = "disabled";
 			};
 
-			spi1: cspi@43fa4000 {
+			spi1: spi@43fa4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -191,14 +200,14 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x40000>;
 			ranges;
 
-			spi3: cspi@50004000 {
+			spi3: spi@50004000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -227,7 +236,7 @@
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
@@ -248,6 +257,7 @@
 				dmas = <&sdma 24 1 0>,
 				       <&sdma 25 1 0>;
 				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
 				status = "disabled";
 			};
 
@@ -265,13 +275,37 @@
 				status = "disabled";
 			};
 
-			tsc: tsc@50030000 {
-				compatible = "fsl,imx25-adc", "fsl,imx21-tsc";
-				reg = <0x50030000 0x4000>;
+			tscadc: tscadc@50030000 {
+				compatible = "fsl,imx25-tsadc";
+				reg = <0x50030000 0xc>;
 				interrupts = <46>;
 				clocks = <&clks 119>;
 				clock-names = "ipg";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+				#address-cells = <1>;
+				#size-cells = <1>;
 				status = "disabled";
+				ranges;
+
+				adc: adc@50030800 {
+					compatible = "fsl,imx25-gcq";
+					reg = <0x50030800 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					status = "disabled";
+				};
+
+				tsc: tcq@50030400 {
+					compatible = "fsl,imx25-tcq";
+					reg = <0x50030400 0x60>;
+					interrupt-parent = <&tscadc>;
+					interrupts = <0>;
+					fsl,wires = <4>;
+					status = "disabled";
+				};
 			};
 
 			ssi1: ssi@50034000 {
@@ -284,6 +318,7 @@
 				dmas = <&sdma 28 1 0>,
 				       <&sdma 29 1 0>;
 				dma-names = "rx", "tx";
+				fsl,fifo-depth = <15>;
 				status = "disabled";
 			};
 
@@ -297,13 +332,18 @@
 			};
 		};
 
-		aips@53f00000 { /* AIPS2 */
+		bus@53f00000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x53f00000 0x100000>;
 			ranges;
 
+			aips2: bridge@53f00000 {
+				compatible = "fsl,imx25-aips";
+				reg = <0x53f00000 0x4000>;
+			};
+
 			clks: ccm@53f80000 {
 				compatible = "fsl,imx25-ccm";
 				reg = <0x53f80000 0x4000>;
@@ -346,12 +386,16 @@
 			epit1: timer@53f94000 {
 				compatible = "fsl,imx25-epit";
 				reg = <0x53f94000 0x4000>;
+				clocks = <&clks 83>, <&clks 43>;
+				clock-names = "ipg", "per";
 				interrupts = <28>;
 			};
 
 			epit2: timer@53f98000 {
 				compatible = "fsl,imx25-epit";
 				reg = <0x53f98000 0x4000>;
+				clocks = <&clks 84>, <&clks 43>;
+				clock-names = "ipg", "per";
 				interrupts = <27>;
 			};
 
@@ -367,7 +411,7 @@
 
 			pwm2: pwm@53fa0000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fa0000 0x4000>;
 				clocks = <&clks 106>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -386,14 +430,30 @@
 
 			pwm3: pwm@53fa8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fa8000 0x4000>;
 				clocks = <&clks 107>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <41>;
 			};
 
-			esdhc1: esdhc@53fb4000 {
+			scc: crypto@53fac000 {
+				compatible = "fsl,imx25-scc";
+				reg = <0x53fac000 0x4000>;
+				clocks = <&clks 111>;
+				clock-names = "ipg";
+				interrupts = <49>, <50>;
+				interrupt-names = "scm", "smn";
+			};
+
+			rngb: rngb@53fb0000 {
+				compatible = "fsl,imx25-rngb";
+				reg = <0x53fb0000 0x4000>;
+				clocks = <&clks 109>;
+				interrupts = <22>;
+			};
+
+			esdhc1: mmc@53fb4000 {
 				compatible = "fsl,imx25-esdhc";
 				reg = <0x53fb4000 0x4000>;
 				interrupts = <9>;
@@ -402,7 +462,7 @@
 				status = "disabled";
 			};
 
-			esdhc2: esdhc@53fb8000 {
+			esdhc2: mmc@53fb8000 {
 				compatible = "fsl,imx25-esdhc";
 				reg = <0x53fb8000 0x4000>;
 				interrupts = <8>;
@@ -428,7 +488,7 @@
 
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fc8000 0x4000>;
 				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
@@ -455,7 +515,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx25-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 112>, <&clks 68>;
@@ -465,7 +525,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx25.bin";
 			};
 
-			wdog@53fdc000 {
+			watchdog@53fdc000 {
 				compatible = "fsl,imx25-wdt", "fsl,imx21-wdt";
 				reg = <0x53fdc000 0x4000>;
 				clocks = <&clks 126>;
@@ -475,14 +535,14 @@
 
 			pwm1: pwm@53fe0000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				reg = <0x53fe0000 0x4000>;
 				clocks = <&clks 105>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <26>;
 			};
 
-			iim: iim@53ff0000 {
+			iim: efuse@53ff0000 {
 				compatible = "fsl,imx25-iim", "fsl,imx27-iim";
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <19>;
@@ -493,9 +553,12 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 70>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
+				phy_type = "utmi";
+				dr_mode = "otg";
 				status = "disabled";
 			};
 
@@ -503,17 +566,19 @@
 				compatible = "fsl,imx25-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 70>;
+				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
+				maximum-speed = "full-speed";
+				phy_type = "serial";
+				dr_mode = "host";
 				status = "disabled";
 			};
 
 			usbmisc: usbmisc@53ff4600 {
 				#index-cells = <1>;
 				compatible = "fsl,imx25-usbmisc";
-				clocks = <&clks 9>, <&clks 70>, <&clks 8>;
-				clock-names = "ipg", "ahb", "per";
 				reg = <0x53ff4600 0x00f>;
 			};
 
@@ -522,7 +587,7 @@
 				reg = <0x53ffc000 0x4000>;
 				clocks = <&clks 81>;
 				clock-names = "ipg";
-				interrupts = <25>;
+				interrupts = <25 56>;
 			};
 		};
 
@@ -560,11 +625,13 @@
 		usbphy0: usb-phy@0 {
 			reg = <0>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 
 		usbphy1: usb-phy@1 {
 			reg = <1>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts
index 73aae4f5e539..745d5d409952 100644
--- a/arch/arm/boot/dts/imx27-apf27.dts
+++ b/arch/arm/boot/dts/imx27-apf27.dts
@@ -1,15 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Philippe Reynes <tremyfr@yahoo.fr>
  * Copyright 2012 Armadeus Systems <support@armadeus.com>
  *
  * Based on code which is: Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -19,20 +13,14 @@
 	model = "Armadeus Systems APF27 module";
 	compatible = "armadeus,imx27-apf27", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
+		device_type = "memory";
 		reg = <0xa0000000 0x04000000>;
 	};
+};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <0>;
-		};
-	};
+&clk_osc26m {
+	clock-frequency = <0>;
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/imx27-apf27dev.dts b/arch/arm/boot/dts/imx27-apf27dev.dts
index bba3f41b89ef..6f1e8ce9e76e 100644
--- a/arch/arm/boot/dts/imx27-apf27dev.dts
+++ b/arch/arm/boot/dts/imx27-apf27dev.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /* APF27Dev is a docking board for the APF27 SOM */
@@ -18,10 +12,10 @@
 
 	display: display {
 		model = "Chimei-LW700AT9003";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;  /* non-standard but required */
 		fsl,pcr = <0xfae80083>;	/* non-standard but required */
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 800x480 {
 				clock-frequency = <33000033>;
 				hactive = <800>;
@@ -77,7 +71,6 @@
 };
 
 &cspi1 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi1 &pinctrl_cspi1_cs>;
@@ -95,7 +88,6 @@
 };
 
 &cspi2 {
-	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio4 21 GPIO_ACTIVE_LOW>,
 		   <&gpio4 27 GPIO_ACTIVE_LOW>,
 		   <&gpio2 17 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
index e2242638ea0b..74110bbcd9d4 100644
--- a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,21 +10,15 @@
 	model = "Eukrea CPUIMX27";
 	compatible = "eukrea,cpuimx27", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
+		device_type = "memory";
 		reg = <0xa0000000 0x04000000>;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		clk14745600: clock@0 {
-			#clock-cells = <0>;
-			compatible = "fixed-clock";
-			clock-frequency = <14745600>;
-			reg = <0>;
-		};
+	clk14745600: clk-uart {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <14745600>;
 	};
 };
 
@@ -77,7 +65,7 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
index 2ab65fc4c1e1..9c3ec82ec7e5 100644
--- a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx27-eukrea-cpuimx27.dtsi"
@@ -17,11 +11,11 @@
 
 	display0: CMO-QVGA {
 		model = "CMO-QVGA";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xfad08b80>;
 
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 320x240 {
 				clock-frequency = <6500000>;
 				hactive = <320>;
@@ -81,11 +75,10 @@
 
 &cspi1 {
 	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	ads7846 {
+	ads7846@0 {
 		compatible = "ti,ads7846";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touch>;
@@ -140,21 +133,21 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts
index 49450dbbcab8..35123b7cb6b3 100644
--- a/arch/arm/boot/dts/imx27-pdk.dts
+++ b/arch/arm/boot/dts/imx27-pdk.dts
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
 
 /dts-v1/;
 #include "imx27.dtsi"
@@ -16,7 +9,8 @@
 	model = "Freescale i.MX27 Product Development Kit";
 	compatible = "fsl,imx27-pdk", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
+		device_type = "memory";
 		reg = <0xa0000000 0x08000000>;
 	};
 
@@ -30,6 +24,7 @@
 			reg = <0>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
@@ -37,7 +32,6 @@
 &cspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi2>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
@@ -106,7 +100,7 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
index 7c869fe3c30b..188639738dc3 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx27-phytec-phycard-s-som.dtsi"
@@ -21,10 +15,10 @@
 
 	display: display {
 		model = "Primeview-PD050VL1";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;  /* non-standard but required */
 		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 640x480 {
 				hactive = <640>;
 				vactive = <480>;
@@ -81,8 +75,8 @@
 	imx27-phycard-s-rdk {
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
-				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+				MX27_PAD_I2C_DATA__I2C_DATA 0x0
+				MX27_PAD_I2C_CLK__I2C_CLK 0x0
 			>;
 		};
 
@@ -147,21 +141,21 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
 &uart3 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
index 1b6248079682..303f920201c5 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycard-s-som.dtsi
@@ -1,13 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
  * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -17,15 +11,15 @@
 	model = "Phytec pca100";
 	compatible = "phytec,imx27-pca100", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
+		device_type = "memory";
 		reg = <0xa0000000 0x08000000>; /* 128MB */
 	};
 };
 
 &cspi1 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
+		   <&gpio4 27 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -41,7 +35,7 @@
 	status = "okay";
 
 	at24@52 {
-		compatible = "at,24c32";
+		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x52>;
 	};
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
index 538568b0de26..344e77790152 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -1,10 +1,5 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx27-phytec-phycore-som.dtsi"
@@ -19,11 +14,11 @@
 
 	display0: LQ035Q7 {
 		model = "Sharp-LQ035Q7";
-		native-mode = <&timing0>;
 		bits-per-pixel = <16>;
 		fsl,pcr = <0xf00080c0>;
 
 		display-timings {
+			native-mode = <&timing0>;
 			timing0: 240x320 {
 				clock-frequency = <5500000>;
 				hactive = <240>;
@@ -63,14 +58,14 @@
 			vcc-supply = <&reg_5v0>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
 
 &cspi1 {
 	pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>,
 		   <&gpio4 27 GPIO_ACTIVE_LOW>;
 };
 
@@ -283,14 +278,14 @@
 };
 
 &uart1 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
index b4e955e3be8d..3d10273177e9 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,7 +10,8 @@
 	model = "Phytec pcm038";
 	compatible = "phytec,imx27-pcm038", "fsl,imx27";
 
-	memory {
+	memory@a0000000 {
+		device_type = "memory";
 		reg = <0xa0000000 0x08000000>;
 	};
 
@@ -53,6 +48,7 @@
 			vcc-supply = <&sw3_reg>;
 			clocks = <&clks IMX27_CLK_DUMMY>;
 			clock-names = "main_clk";
+			#phy-cells = <0>;
 		};
 	};
 };
@@ -75,7 +71,6 @@
 &cspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
@@ -194,7 +189,7 @@
 	status = "okay";
 
 	at24@52 {
-		compatible = "at,24c32";
+		compatible = "atmel,24c32";
 		pagesize = <32>;
 		reg = <0x52>;
 	};
diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h
index 597bb5f74dcc..75aea0c701d4 100644
--- a/arch/arm/boot/dts/imx27-pinfunc.h
+++ b/arch/arm/boot/dts/imx27-pinfunc.h
@@ -1,12 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
 /*
  * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DTS_IMX27_PINFUNC_H
@@ -32,9 +26,9 @@
  *                2 - 0
  *                3 - 1
  *
- * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32 configurable
- * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is the pin
- * number on the specific port (between 0 and 31).
+ * 'pin' is an integer between 0 and 0xbf. imx27 has 6 ports with 32
+ * configurable pins each. 'pin' is PORT * 32 + PORT_PIN, PORT_PIN is
+ * the pin number on the specific port (between 0 and 31).
  */
 
 #define MX27_PAD_USBH2_CLK__USBH2_CLK                      0x00 0x000
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc215e4b75fd..e140307be2e7 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -1,15 +1,7 @@
-/*
- * Copyright 2012 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Sascha Hauer, Pengutronix
+
 #include "imx27-pinfunc.h"
 
 #include <dt-bindings/clock/imx27-clock.h>
@@ -18,6 +10,15 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -39,7 +40,7 @@
 		spi2 = &cspi3;
 	};
 
-	aitc: aitc-interrupt-controller@e0000000 {
+	aitc: aitc-interrupt-controller@10040000 {
 		compatible = "fsl,imx27-aitc", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
@@ -47,10 +48,7 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
+		clk_osc26m: osc26m {
 			compatible = "fsl,imx-osc26m", "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <26000000>;
@@ -63,6 +61,7 @@
 
 		cpu: cpu@0 {
 			device_type = "cpu";
+			reg = <0>;
 			compatible = "arm,arm926ej-s";
 			operating-points = <
 				/* kHz uV */
@@ -75,14 +74,14 @@
 		};
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&aitc>;
 		ranges;
 
-		aipi@10000000 { /* AIPI1 */
+		aipi1: aipi@10000000 { /* AIPI1 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -97,10 +96,10 @@
 					 <&clks IMX27_CLK_DMA_AHB_GATE>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <1>;
-				#dma-channels = <16>;
+				dma-channels = <16>;
 			};
 
-			wdog: wdog@10002000 {
+			wdog: watchdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x1000>;
 				interrupts = <27>;
@@ -108,7 +107,7 @@
 			};
 
 			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10003000 0x1000>;
 				interrupts = <26>;
 				clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
@@ -117,7 +116,7 @@
 			};
 
 			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10004000 0x1000>;
 				interrupts = <25>;
 				clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>,
@@ -126,7 +125,7 @@
 			};
 
 			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10005000 0x1000>;
 				interrupts = <24>;
 				clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>,
@@ -135,7 +134,7 @@
 			};
 
 			pwm: pwm@10006000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx27-pwm";
 				reg = <0x10006000 0x1000>;
 				interrupts = <23>;
@@ -144,6 +143,15 @@
 				clock-names = "ipg", "per";
 			};
 
+			rtc: rtc@10007000 {
+				compatible = "fsl,imx21-rtc";
+				reg = <0x10007000 0x1000>;
+				interrupts = <22>;
+				clocks = <&clks IMX27_CLK_CKIL>,
+					 <&clks IMX27_CLK_RTC_IPG_GATE>;
+				clock-names = "ref", "ipg";
+			};
+
 			kpp: kpp@10008000 {
 				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
 				reg = <0x10008000 0x1000>;
@@ -199,7 +207,7 @@
 				status = "disabled";
 			};
 
-			cspi1: cspi@1000e000 {
+			cspi1: spi@1000e000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
@@ -211,7 +219,7 @@
 				status = "disabled";
 			};
 
-			cspi2: cspi@1000f000 {
+			cspi2: spi@1000f000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
@@ -257,7 +265,7 @@
 				status = "disabled";
 			};
 
-			sdhci1: sdhci@10013000 {
+			sdhci1: mmc@10013000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10013000 0x1000>;
 				interrupts = <11>;
@@ -269,7 +277,7 @@
 				status = "disabled";
 			};
 
-			sdhci2: sdhci@10014000 {
+			sdhci2: mmc@10014000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x10014000 0x1000>;
 				interrupts = <10>;
@@ -363,7 +371,7 @@
 				status = "disabled";
 			};
 
-			cspi3: cspi@10017000 {
+			cspi3: spi@10017000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx27-cspi";
@@ -376,7 +384,7 @@
 			};
 
 			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x10019000 0x1000>;
 				interrupts = <4>;
 				clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>,
@@ -385,7 +393,7 @@
 			};
 
 			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001a000 0x1000>;
 				interrupts = <3>;
 				clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>,
@@ -423,7 +431,7 @@
 				status = "disabled";
 			};
 
-			sdhci3: sdhci@1001e000 {
+			sdhci3: mmc@1001e000 {
 				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
 				reg = <0x1001e000 0x1000>;
 				interrupts = <9>;
@@ -436,7 +444,7 @@
 			};
 
 			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
+				compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
 				reg = <0x1001f000 0x1000>;
 				interrupts = <2>;
 				clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>,
@@ -445,7 +453,7 @@
 			};
 		};
 
-		aipi@10020000 { /* AIPI2 */
+		aipi2: aipi@10020000 { /* AIPI2 */
 			compatible = "fsl,aipi-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -477,7 +485,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024000 0x200>;
 				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@@ -486,7 +497,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024200 0x200>;
 				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
 				status = "disabled";
@@ -496,7 +510,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024400 0x200>;
 				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
 				status = "disabled";
@@ -506,10 +523,9 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx27-usbmisc";
 				reg = <0x10024600 0x200>;
-				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
 			};
 
-			sahara2: sahara@10025000 {
+			sahara2: crypto@10025000 {
 				compatible = "fsl,imx27-sahara";
 				reg = <0x10025000 0x1000>;
 				interrupts = <59>;
@@ -524,7 +540,7 @@
 				#clock-cells = <1>;
 			};
 
-			iim: iim@10028000 {
+			iim: efuse@10028000 {
 				compatible = "fsl,imx27-iim";
 				reg = <0x10028000 0x1000>;
 				interrupts = <62>;
@@ -542,7 +558,7 @@
 			};
 		};
 
-		nfc: nand@d8000000 {
+		nfc: nand-controller@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "fsl,imx27-nand";
@@ -569,7 +585,7 @@
 			status = "disabled";
 		};
 
-		iram: iram@ffff4c00 {
+		iram: sram@ffff4c00 {
 			compatible = "mmio-sram";
 			reg = <0xffff4c00 0xb400>;
 		};
diff --git a/arch/arm/boot/dts/imx28-apf28.dts b/arch/arm/boot/dts/imx28-apf28.dts
index 070e59cbdd8b..98672932e41b 100644
--- a/arch/arm/boot/dts/imx28-apf28.dts
+++ b/arch/arm/boot/dts/imx28-apf28.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,70 +10,63 @@
 	model = "Armadeus Systems APF28 module";
 	compatible = "armadeus,imx28-apf28", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
+};
 
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x300000>;
-				};
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
 
-				partition@300000 {
-					label = "env";
-					reg = <0x300000 0x80000>;
-				};
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
 
-				partition@380000 {
-					label = "env2";
-					reg = <0x380000 0x80000>;
-				};
+	partition@0 {
+		label = "u-boot";
+		reg = <0x0 0x300000>;
+	};
 
-				partition@400000 {
-					label = "dtb";
-					reg = <0x400000 0x80000>;
-				};
+	partition@300000 {
+		label = "env";
+		reg = <0x300000 0x80000>;
+	};
 
-				partition@480000 {
-					label = "splash";
-					reg = <0x480000 0x80000>;
-				};
+	partition@380000 {
+		label = "env2";
+		reg = <0x380000 0x80000>;
+	};
 
-				partition@500000 {
-					label = "kernel";
-					reg = <0x500000 0x800000>;
-				};
+	partition@400000 {
+		label = "dtb";
+		reg = <0x400000 0x80000>;
+	};
 
-				partition@d00000 {
-					label = "rootfs";
-					reg = <0xd00000 0xf300000>;
-				};
-			};
-		};
+	partition@480000 {
+		label = "splash";
+		reg = <0x480000 0x80000>;
+	};
 
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-		};
+	partition@500000 {
+		label = "kernel";
+		reg = <0x500000 0x800000>;
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
+	partition@d00000 {
+		label = "rootfs";
+		reg = <0xd00000 0xf300000>;
 	};
 };
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 7ac4f1af16ac..4704b6141836 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /* APF28Dev is a docking board for the APF28 SOM */
@@ -16,166 +10,6 @@
 	model = "Armadeus Systems APF28Dev docking/development board";
 	compatible = "armadeus,imx28-apf28dev", "armadeus,imx28-apf28", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_apf28dev>;
-
-				hog_pins_apf28dev: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D16__GPIO_1_16
-						MX28_PAD_LCD_D17__GPIO_1_17
-						MX28_PAD_LCD_D18__GPIO_1_18
-						MX28_PAD_LCD_D19__GPIO_1_19
-						MX28_PAD_LCD_D20__GPIO_1_20
-						MX28_PAD_LCD_D21__GPIO_1_21
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apf28dev: lcdif-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_apf28dev: otg-apf28dev@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_16bit_pins_a
-						&lcdif_pins_apf28dev>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <16>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33000033>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <96>;
-							hfront-porch = <96>;
-							vback-porch = <20>;
-							vfront-porch = <21>;
-							hsync-len = <64>;
-							vsync-len = <4>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can0_vcc>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_apf28dev
-					&usb0_id_pins_b>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -225,7 +59,159 @@
 			label = "User button";
 			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 			linux,code = <0x100>;
-			gpio-key,wakeup;
+			wakeup-source;
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can0_vcc>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_16bit_pins_a
+		     &lcdif_pins_apf28dev>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <16>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33000033>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <96>;
+				hfront-porch = <96>;
+				vback-porch = <20>;
+				vfront-porch = <21>;
+				hsync-len = <64>;
+				vsync-len = <4>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
 		};
 	};
 };
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	phy-reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_apf28dev>;
+
+	hog_pins_apf28dev: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D16__GPIO_1_16
+			MX28_PAD_LCD_D17__GPIO_1_17
+			MX28_PAD_LCD_D18__GPIO_1_18
+			MX28_PAD_LCD_D19__GPIO_1_19
+			MX28_PAD_LCD_D20__GPIO_1_20
+			MX28_PAD_LCD_D21__GPIO_1_21
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apf28dev: lcdif-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_apf28dev: otg-apf28dev@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a &pwm4_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_apf28dev
+		     &usb0_id_pins_b>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts
index 1092b761d7ac..f9bf40d96568 100644
--- a/arch/arm/boot/dts/imx28-apx4devkit.dts
+++ b/arch/arm/boot/dts/imx28-apx4devkit.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 #include "imx28.dtsi"
 
@@ -5,192 +6,11 @@
 	model = "Bluegiga APX4 Development Kit";
 	compatible = "bluegiga,apx4devkit", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x04000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_RDY1__GPIO_0_21
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_JTAG_RTCK__GPIO_4_20
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_apx4: lcdif-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA4__SSP2_D0
-						MX28_PAD_SSP0_DATA5__SSP2_D3
-						MX28_PAD_SSP0_DATA6__SSP2_CMD
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-						MX28_PAD_SSP2_SS1__SSP2_D1
-						MX28_PAD_SSP2_SS2__SSP2_D2
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 {
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__SSP2_SCK
-					>;
-					fsl,drive-strength = <MXS_DRIVE_12mA>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_apx4>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <88>;
-							hfront-porch = <40>;
-							vback-porch = <32>;
-							vfront-porch = <13>;
-							hsync-len = <48>;
-							vsync-len = <3>;
-							hsync-active = <1>;
-							vsync-active = <1>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				pcf8563: rtc@51 {
-					compatible = "phg,pcf8563";
-					reg = <0x51>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_2pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -224,3 +44,189 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_2pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_apx4>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hfront-porch = <40>;
+				vback-porch = <32>;
+				vfront-porch = <13>;
+				hsync-len = <48>;
+				vsync-len = <3>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	pcf8563: rtc@51 {
+		compatible = "phg,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_SSP2_SS0__AUART3_TX /* was: 0x2131 - MX28_PAD_SSP2_SS0__GPIO_2_19 */
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_JTAG_RTCK__GPIO_4_20
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_apx4: lcdif-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA4__SSP2_D0
+			MX28_PAD_SSP0_DATA5__SSP2_D3
+			MX28_PAD_SSP0_DATA6__SSP2_CMD
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+			MX28_PAD_SSP2_SS1__SSP2_D1
+			MX28_PAD_SSP2_SS2__SSP2_D2
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__SSP2_SCK
+		>;
+		fsl,drive-strength = <MXS_DRIVE_12mA>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb1 {
+      status = "okay";
+};
+
+&usbphy1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 570aa339a05e..d004b1cbb4ae 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -1,126 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
 #include "imx28.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
 	model = "Crystalfontz CFA-10036 Board";
 	compatible = "crystalfontz,cfa10036", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				ssd1306_cfa10036: ssd1306-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_cfa10036: leds-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				usb0_otg_cfa10036: otg-10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDY0__USB0_ID
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						0x31c3 /*
-						MX28_PAD_PWM3__GPIO_3_28 */
-					>;
-					fsl,drive-strength = <0>;
-					fsl,voltage = <1>;
-					fsl,pull-up = <0>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				bus-width = <4>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_b>;
-				clock-frequency = <400000>;
-				status = "okay";
-
-				ssd1306: oled@3c {
-					compatible = "solomon,ssd1306fb-i2c";
-					pinctrl-names = "default";
-					pinctrl-0 = <&ssd1306_cfa10036>;
-					reg = <0x3c>;
-					reset-gpios = <&gpio2 7 0>;
-					solomon,height = <32>;
-					solomon,width = <128>;
-					solomon,page-offset = <0>;
-					solomon,com-lrremap;
-					solomon,com-invdir;
-					solomon,com-offset = <32>;
-				};
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_otg_cfa10036>;
-			dr_mode = "peripheral";
-			phy_type = "utmi";
-			status = "okay";
-		};
-	};
-
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -142,3 +37,95 @@
 		gpio = <&gpio3 28 0>;
 	};
 };
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ssd1306: oled@3c {
+		compatible = "solomon,ssd1306fb-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ssd1306_cfa10036>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+		solomon,height = <32>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,com-lrremap;
+		solomon,com-invdir;
+		solomon,com-offset = <32>;
+	};
+};
+
+&pinctrl {
+	ssd1306_cfa10036: ssd1306-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_cfa10036: leds-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	usb0_otg_cfa10036: otg-10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY0__USB0_ID
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			0x31c3 /*
+			MX28_PAD_PWM3__GPIO_3_28 */
+		>;
+		fsl,drive-strength = <0>;
+		fsl,voltage = <1>;
+		fsl,pull-up = <0>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_otg_cfa10036>;
+	dr_mode = "peripheral";
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index e5beaa58bb40..d3e9a731525b 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /*
@@ -64,7 +58,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&mac0_pins_a
 				&mac0_pins_cfa10037>;
-			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
 			phy-reset-duration = <100>;
 			status = "okay";
 		};
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index ef944b6d4f01..94d6614c1983 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /*
@@ -19,288 +13,68 @@
 	model = "Crystalfontz CFA-10049 Board";
 	compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10049: usb-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				i2cmux_pins_cfa10049: i2cmux-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D22__GPIO_1_22
-						MX28_PAD_LCD_D23__GPIO_1_23
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				mac0_pins_cfa10049: mac0-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS2__GPIO_2_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				pca_pins_cfa10049: pca-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_pins_cfa10049: rotary-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_I2C0_SCL__GPIO_3_24
-						MX28_PAD_I2C0_SDA__GPIO_3_25
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SAIF1_SDATA0__GPIO_3_26
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi2_pins_cfa10049: spi2-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				spi3_pins_cfa10049: spi3-cfa10049@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_RDN__GPIO_0_24
-						MX28_PAD_GPMI_RESETN__GPIO_0_28
-						MX28_PAD_GPMI_CE1N__GPIO_0_17
-						MX28_PAD_GPMI_ALE__GPIO_0_26
-						MX28_PAD_GPMI_CLE__GPIO_0_27
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				w1_gpio_pins: w1-gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D21__GPIO_1_21
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
-				};
-			};
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2cmux_pins_cfa10049>;
+		mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
+		i2c-parent = <&i2c1>;
 
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10049
-					     &lcdif_pins_cfa10049
-					     &lcdif_pins_cfa10049_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
+		i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
 
-		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
+			adc0: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
 			};
+		};
 
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
 
-			i2cmux {
-				compatible = "i2c-mux-gpio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2cmux_pins_cfa10049>;
-				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
-				i2c-parent = <&i2c1>;
-
-				i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-
-					adc0: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-
-					adc1: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					adc2: nau7802@2a {
-						compatible = "nuvoton,nau7802";
-						reg = <0x2a>;
-						nuvoton,vldo = <3000>;
-					};
-				};
-
-				i2c@3 {
-					reg = <3>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					pca9555: pca9555@20 {
-						compatible = "nxp,pca9555";
-						pinctrl-names = "default";
-						pinctrl-0 = <&pca_pins_cfa10049>;
-						interrupt-parent = <&gpio2>;
-						interrupts = <19 0x2>;
-						gpio-controller;
-						#gpio-cells = <2>;
-						interrupt-controller;
-						#interrupt-cells = <2>;
-						reg = <0x20>;
-					};
-				};
+			adc1: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
 			};
+		};
 
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
+		i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
 
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
+				adc2: nau7802@2a {
+				compatible = "nuvoton,nau7802";
+				reg = <0x2a>;
+				nuvoton,vldo = <3000>;
 			};
 		};
-	};
 
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
+		i2c@3 {
+			reg = <3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pca9555: pca9555@20 {
+				compatible = "nxp,pca9555";
+				pinctrl-names = "default";
+				pinctrl-0 = <&pca_pins_cfa10049>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <19 0x2>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				reg = <0x20>;
+			};
 		};
 	};
 
@@ -321,19 +95,7 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a
-				&mac0_pins_cfa10049>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10049>;
@@ -357,7 +119,7 @@
 		};
 	};
 
-	spi3 {
+	spi-3 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi3_pins_cfa10049>;
@@ -394,14 +156,12 @@
 		};
 	};
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&rotary_btn_pins_cfa10049>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		rotary_button {
+		rotary-button {
 			label = "rotary_button";
 			gpios = <&gpio3 26 1>;
 			debounce-interval = <10>;
@@ -426,7 +186,7 @@
 
 	};
 
-	onewire@0 {
+	onewire {
 		compatible = "w1-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&w1_gpio_pins>;
@@ -434,3 +194,225 @@
 		gpios = <&gpio1 21 0>;
 	};
 };
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10049
+		     &lcdif_pins_cfa10049
+		     &lcdif_pins_cfa10049_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a
+		&mac0_pins_cfa10049>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10049: usb-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	i2cmux_pins_cfa10049: i2cmux-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D22__GPIO_1_22
+			MX28_PAD_LCD_D23__GPIO_1_23
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_pins_cfa10049: mac0-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	pca_pins_cfa10049: pca-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_pins_cfa10049: rotary-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_I2C0_SCL__GPIO_3_24
+			MX28_PAD_I2C0_SDA__GPIO_3_25
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF1_SDATA0__GPIO_3_26
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi2_pins_cfa10049: spi2-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	spi3_pins_cfa10049: spi3-cfa10049@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_RESETN__GPIO_0_28
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_ALE__GPIO_0_26
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10049: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	w1_gpio_pins: w1-gpio@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D21__GPIO_1_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>; /* 0 will enable the keeper */
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 6a34114bec29..42ba7da48beb 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -1,13 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Crystalfontz America, Inc.
  * 				  Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /*
@@ -20,122 +14,7 @@
 	model = "Crystalfontz CFA-10055 Board";
 	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10055: spi2-cfa10055@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
-					     &lcdif_pins_cfa10055
-					     &lcdif_pins_cfa10055_pullup>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <9216000>;
-							hactive = <320>;
-							vactive = <480>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <15>;
-							vsync-len = <15>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-		};
-	};
-
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10055>;
@@ -165,3 +44,112 @@
 		default-brightness-level = <6>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+		     &lcdif_pins_cfa10055
+		     &lcdif_pins_cfa10055_pullup>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <9216000>;
+				hactive = <320>;
+				vactive = <480>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <15>;
+				vsync-len = <15>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&pinctrl {
+	spi2_pins_cfa10055: spi2-cfa10055@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
index ba6495ca44d2..0e15bdfd7281 100644
--- a/arch/arm/boot/dts/imx28-cfa10056.dts
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /*
@@ -19,82 +13,7 @@
 	model = "Crystalfontz CFA-10056 Board";
 	compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				spi2_pins_cfa10056: spi2-cfa10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SCK__GPIO_2_16
-						MX28_PAD_SSP2_MOSI__GPIO_2_17
-						MX28_PAD_SSP2_MISO__GPIO_2_18
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_8mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-
-				lcdif_pins_cfa10056: lcdif-10056@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RESET__GPIO_3_30
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_ENABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						&lcdif_pins_cfa10056
-						&lcdif_pins_cfa10056_pullup >;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <32000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hback-porch = <2>;
-							hfront-porch = <2>;
-							vback-porch = <2>;
-							vfront-porch = <2>;
-							hsync-len = <5>;
-							vsync-len = <5>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-	};
-
-	spi2 {
+	spi-2 {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi2_pins_cfa10056>;
@@ -117,3 +36,74 @@
 		};
 	};
 };
+
+&pinctrl {
+	spi2_pins_cfa10056: spi2-cfa10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SCK__GPIO_2_16
+			MX28_PAD_SSP2_MOSI__GPIO_2_17
+			MX28_PAD_SSP2_MISO__GPIO_2_18
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_8mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+
+	lcdif_pins_cfa10056: lcdif-10056@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RESET__GPIO_3_30
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_ENABLE>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			&lcdif_pins_cfa10056
+			&lcdif_pins_cfa10056_pullup >;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <32000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hback-porch = <2>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vfront-porch = <2>;
+				hsync-len = <5>;
+				vsync-len = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 5df0b24eaf59..27602c01f162 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -1,13 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Crystalfontz America, Inc.
  * Copyright 2012 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /*
@@ -20,126 +14,6 @@
 	model = "Crystalfontz CFA-10057 Board";
 	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10057: usb-10057@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_D00__LCD_D0
-						MX28_PAD_LCD_D01__LCD_D1
-						MX28_PAD_LCD_D02__LCD_D2
-						MX28_PAD_LCD_D03__LCD_D3
-						MX28_PAD_LCD_D04__LCD_D4
-						MX28_PAD_LCD_D05__LCD_D5
-						MX28_PAD_LCD_D06__LCD_D6
-						MX28_PAD_LCD_D07__LCD_D7
-						MX28_PAD_LCD_D08__LCD_D8
-						MX28_PAD_LCD_D09__LCD_D9
-						MX28_PAD_LCD_D10__LCD_D10
-						MX28_PAD_LCD_D11__LCD_D11
-						MX28_PAD_LCD_D12__LCD_D12
-						MX28_PAD_LCD_D13__LCD_D13
-						MX28_PAD_LCD_D14__LCD_D14
-						MX28_PAD_LCD_D15__LCD_D15
-						MX28_PAD_LCD_D16__LCD_D16
-						MX28_PAD_LCD_D17__LCD_D17
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10057: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
-					     &lcdif_pins_cfa10057>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <480>;
-							vactive = <800>;
-							hfront-porch = <12>;
-							hback-porch = <2>;
-							vfront-porch = <5>;
-							vback-porch = <3>;
-							hsync-len = <2>;
-							vsync-len = <2>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			i2c1: i2c@8005a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c1_pins_a>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -157,21 +31,131 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm 3 5000000>;
+		pwms = <&pwm 4 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <7>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+		     &lcdif_pins_cfa10057>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <12>;
+				hback-porch = <2>;
+				vfront-porch = <5>;
+				vback-porch = <3>;
+				hsync-len = <2>;
+				vsync-len = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10057: usb-10057@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D00__LCD_D0
+			MX28_PAD_LCD_D01__LCD_D1
+			MX28_PAD_LCD_D02__LCD_D2
+			MX28_PAD_LCD_D03__LCD_D3
+			MX28_PAD_LCD_D04__LCD_D4
+			MX28_PAD_LCD_D05__LCD_D5
+			MX28_PAD_LCD_D06__LCD_D6
+			MX28_PAD_LCD_D07__LCD_D7
+			MX28_PAD_LCD_D08__LCD_D8
+			MX28_PAD_LCD_D09__LCD_D9
+			MX28_PAD_LCD_D10__LCD_D10
+			MX28_PAD_LCD_D11__LCD_D11
+			MX28_PAD_LCD_D12__LCD_D12
+			MX28_PAD_LCD_D13__LCD_D13
+			MX28_PAD_LCD_D14__LCD_D14
+			MX28_PAD_LCD_D15__LCD_D15
+			MX28_PAD_LCD_D16__LCD_D16
+			MX28_PAD_LCD_D17__LCD_D17
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10057: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
index f5c6dce34abe..931c4d089b26 100644
--- a/arch/arm/boot/dts/imx28-cfa10058.dts
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -1,13 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Crystalfontz America, Inc.
  * Copyright 2013 Free Electrons
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /*
@@ -20,93 +14,6 @@
 	model = "Crystalfontz CFA-10058 Board";
 	compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				usb_pins_cfa10058: usb-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D07__GPIO_0_7
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_cfa10058: lcdif-10058@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-						 &lcdif_pins_cfa10058>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <30000000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <40>;
-							hfront-porch = <40>;
-							vback-porch = <13>;
-							vfront-porch = <29>;
-							hsync-len = <8>;
-							vsync-len = <8>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			lradc@80050000 {
-				fsl,lradc-touchscreen-wires = <4>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-0 = <&usb1_pins_a>;
-			pinctrl-names = "default";
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -124,17 +31,6 @@
 		};
 	};
 
-	ahb@80080000 {
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio2 21 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 3 5000000>;
@@ -142,3 +38,91 @@
 		default-brightness-level = <6>;
 	};
 };
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+			 &lcdif_pins_cfa10058>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hfront-porch = <40>;
+				vback-porch = <13>;
+				vfront-porch = <29>;
+				hsync-len = <8>;
+				vsync-len = <8>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&pinctrl {
+	usb_pins_cfa10058: usb-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_cfa10058: lcdif-10058@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_b>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-0 = <&usb1_pins_a>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-485.dts b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
new file mode 100644
index 000000000000..b73020ff1053
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-485.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 485";
+	compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		rs485-red {
+			label = "duckbill:red:rs485";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		rs485-green {
+			label = "duckbill:green:rs485";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
new file mode 100644
index 000000000000..473d99b9b42f
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-enocean.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 EnOcean";
+	compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+	leds {
+		enocean-blue {
+			label = "duckbill:blue:enocean";
+			gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-red {
+			label = "duckbill:red:enocean";
+			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+		};
+
+		enocean-green {
+			label = "duckbill:green:enocean";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&enocean_button>;
+
+		key-enocean {
+			label = "EnOcean";
+			linux,code = <KEY_NEW>;
+			gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&led_pins {
+	fsl,pinmux-ids = <
+		MX28_PAD_SAIF0_MCLK__GPIO_3_20
+		MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		MX28_PAD_AUART0_CTS__GPIO_3_2
+		MX28_PAD_I2C0_SCL__GPIO_3_24
+		MX28_PAD_I2C0_SDA__GPIO_3_25
+	>;
+};
+
+&pinctrl {
+	enocean_button: enocean-button@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2-spi.dts b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
new file mode 100644
index 000000000000..859d97a5a775
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2-spi.dts
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include "imx28-duckbill-2.dts"
+
+/ {
+	model = "I2SE Duckbill 2 SPI";
+	compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
+
+	aliases {
+		ethernet1 = &qca7000;
+	};
+};
+
+&auart0 {
+	status = "disabled";
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&pinctrl {
+	qca7000_pins: qca7000@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART0_RTS__GPIO_3_3    /* Interrupt */
+			MX28_PAD_LCD_D13__GPIO_1_13      /* QCA7K reset */
+			MX28_PAD_LCD_D14__GPIO_1_14      /* GPIO 0 */
+			MX28_PAD_LCD_D15__GPIO_1_15      /* GPIO 1 */
+			MX28_PAD_LCD_D18__GPIO_1_18      /* GPIO 2 */
+			MX28_PAD_LCD_D21__GPIO_1_21      /* GPIO 3 */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	/delete-property/ bus-width;
+	/delete-property/ vmmc-supply;
+	status = "okay";
+
+	qca7000: ethernet@0 {
+		reg = <0>;
+		compatible = "qca,qca7000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&qca7000_pins>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+		spi-cpha;
+		spi-cpol;
+		spi-max-frequency = <8000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill-2.dts b/arch/arm/boot/dts/imx28-duckbill-2.dts
new file mode 100644
index 000000000000..4e28212e9626
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-duckbill-2.dts
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
+ * Copyright (C) 2016 Michael Heimpold <mhei@heimpold.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "imx28.dtsi"
+
+/ {
+	model = "I2SE Duckbill 2";
+	compatible = "i2se,duckbill-2", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_phy_int_pin>;
+			interrupt-parent = <&gpio0>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_ALE__GPIO_0_26    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	mac0_phy_int_pin: mac0-phy-int@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D07__GPIO_0_7    /* PHY Interrupt */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SAIF0_MCLK__GPIO_3_20
+			MX28_PAD_SAIF0_LRCLK__GPIO_3_21
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+	non-removable;
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_b
+		&mmc2_cd_cfg &mmc2_sck_cfg_b>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+	dr_mode = "peripheral";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-duckbill.dts b/arch/arm/boot/dts/imx28-duckbill.dts
index ce1a7effba37..13ffd533fdea 100644
--- a/arch/arm/boot/dts/imx28-duckbill.dts
+++ b/arch/arm/boot/dts/imx28-duckbill.dts
@@ -1,121 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Copyright (C) 2013 Michael Heimpold <mhei@heimpold.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * Copyright (C) 2013-2014,2016 Michael Heimpold <mhei@heimpold.de>
+ * Copyright (C) 2015-2017 I2SE GmbH <info@i2se.com>
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx28.dtsi"
 
 / {
 	model = "I2SE Duckbill";
 	compatible = "i2se,duckbill", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_3p3v>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_a: led_gpio@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_RX__GPIO_3_4
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
 
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
+		status-red {
+			label = "duckbill:red:status";
+			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
 		};
-	};
 
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			status = "okay";
+		status-green {
+			label = "duckbill:green:status";
+			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
 		};
+	};
+};
 
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_3p3v>;
-			phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&lradc {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>, <&mac0_phy_reset_pin>;
+	phy-supply = <&reg_3p3v>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <25>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_D17__GPIO_1_17    /* Revision detection */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	mac0_phy_reset_pin: mac0-phy-reset@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP0_DATA7__GPIO_2_7    /* PHY Reset */
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&led_pins_a>;
+	led_pins: leds@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_RX__GPIO_3_4
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
 
-		status {
-			label = "duckbill:green:status";
-			gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
-		};
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
 
-		failure {
-			label = "duckbill:red:status";
-			gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
-		};
-	};
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
index 7c1572c5a4fb..29f8a3a245d4 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx283lc.dts
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /*
@@ -23,7 +15,8 @@
 	model = "Eukrea Electromatique MBMX283LC";
 	compatible = "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x04000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
index e773144e1e03..cd875ace168d 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx287lc.dts
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /*
@@ -22,7 +14,8 @@
 	model = "Eukrea Electromatique MBMX287LC";
 	compatible = "eukrea,mbmx287lc", "eukrea,mbmx283lc", "eukrea,mbmx28lc", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 };
@@ -31,7 +24,7 @@
 	phy-mode = "rmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mac1_pins_a>;
-	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+	phy-reset-gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
index 927b391d2058..b285a946e2c2 100644
--- a/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
+++ b/arch/arm/boot/dts/imx28-eukrea-mbmx28lc.dtsi
@@ -1,15 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <eric@eukrea.com>
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include <dt-bindings/input/input.h>
@@ -27,29 +19,29 @@
 		default-brightness-level = <10>;
 	};
 
-	button-sw3 {
+	gpio-keys-0 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw3_pins_mbmx28lc>;
 
-		sw3 {
+		switch-sw3 {
 			label = "SW3";
 			gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
-	button-sw4 {
+	gpio-keys-1 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&gpio_button_sw4_pins_mbmx28lc>;
 
-		sw4 {
+		switch-sw4 {
 			label = "SW4";
 			gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -84,6 +76,7 @@
 
 		reg_3p3v: regulator@0 {
 			compatible = "regulator-fixed";
+			reg = <0>;
 			regulator-name = "3P3V";
 			regulator-min-microvolt = <3300000>;
 			regulator-max-microvolt = <3300000>;
@@ -92,6 +85,7 @@
 
 		reg_lcd_3v3: regulator@1 {
 			compatible = "regulator-fixed";
+			reg = <1>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_lcd_3v3_pins_mbmx28lc>;
 			regulator-name = "lcd-3v3";
@@ -103,6 +97,7 @@
 
 		reg_usb0_vbus: regulator@2 {
 			compatible = "regulator-fixed";
+			reg = <2>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_usb0_vbus_pins_mbmx28lc>;
 			regulator-name = "usb0_vbus";
@@ -114,6 +109,7 @@
 
 		reg_usb1_vbus: regulator@3 {
 			compatible = "regulator-fixed";
+			reg = <3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&reg_usb1_vbus_pins_mbmx28lc>;
 			regulator-name = "usb1_vbus";
@@ -144,9 +140,10 @@
 	pinctrl-0 = <&i2c0_pins_a>;
 	status = "okay";
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&saif0>;
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 279249b8c3f3..783abb82b2a8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -1,13 +1,6 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
 
 /dts-v1/;
 #include "imx28.dtsi"
@@ -16,337 +9,90 @@
 	model = "Freescale i.MX28 Evaluation Kit";
 	compatible = "fsl,imx28-evk", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
-					     &gpmi_pins_evk>;
-				status = "okay";
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					&mmc0_cd_cfg &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio2 12 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp1: ssp@80012000 {
-				compatible = "fsl,imx28-mmc";
-				bus-width = <8>;
-				wp-gpios = <&gpio0 28 0>;
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "sst,sst25vf016b";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP1_CMD__GPIO_2_13
-						MX28_PAD_SSP1_DATA3__GPIO_2_15
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-						MX28_PAD_SSP1_SCK__GPIO_2_12
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_LCD_RESET__GPIO_3_30
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_AUART2_TX__GPIO_3_9
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pin_gpio3_5: led_gpio3_5@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				gpmi_pins_evk: gpmi-nand-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_CE1N__GPMI_CE1N
-						MX28_PAD_GPMI_RDY1__GPMI_READY1
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_evk: lcdif-evk@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_RD_E__LCD_VSYNC
-						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
-						MX28_PAD_LCD_RS__LCD_DOTCLK
-						MX28_PAD_LCD_CS__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_evk>;
-				lcd-supply = <&reg_lcd_3v3>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33500000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <89>;
-							hfront-porch = <164>;
-							vback-porch = <23>;
-							vfront-porch = <10>;
-							hsync-len = <10>;
-							vsync-len = <10>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <0>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				xceiver-supply = <&reg_can_3v3>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-				fsl,ave-ctrl = <4>;
-				fsl,ave-delay = <2>;
-				fsl,settling = <10>;
-			};
-
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				at24@51 {
-					compatible = "at24,24c32";
-					pagesize = <32>;
-					reg = <0x51>;
-				};
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm2_pins_a>;
-				status = "okay";
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				fsl,uart-has-rtscts;
-				status = "okay";
-			};
 
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
 	};
 
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_id_pins_a>;
-			vbus-supply = <&reg_usb0_vbus>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-supply = <&reg_fec_3v3>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 28 0>;
+	};
 
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
+	reg_fec_3v3: regulator-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 15 0>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 9 0>;
+		enable-active-high;
+	};
 
-		reg_vddio_sd0: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vddio-sd0";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 28 0>;
-		};
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 8 0>;
+		enable-active-high;
+	};
 
-		reg_fec_3v3: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "fec-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 15 0>;
-		};
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
 
-		reg_usb0_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 9 0>;
-			enable-active-high;
-		};
+	reg_can_3v3: regulator-can-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "can-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 13 0>;
+		enable-active-high;
+	};
 
-		reg_usb1_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 8 0>;
-			enable-active-high;
-		};
+	reg_lcd_5v: regulator-lcd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 
-		reg_lcd_3v3: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "lcd-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 0>;
-			enable-active-high;
-		};
+	panel {
+		compatible = "sii,43wvf1g";
+		backlight = <&backlight_display>;
+		dvdd-supply = <&reg_lcd_3v3>;
+		avdd-supply = <&reg_lcd_5v>;
 
-		reg_can_3v3: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "can-3v3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 13 0>;
-			enable-active-high;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
 		};
-
 	};
 
 	sound {
@@ -369,10 +115,238 @@
 		};
 	};
 
-	backlight {
+	backlight_display: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 2 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_pins_a>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	xceiver-supply = <&reg_can_3v3>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg
+		     &gpmi_pins_evk>;
+	status = "okay";
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_evk>;
+	status = "okay";
+
+	port {
+		display_out: endpoint {
+			remote-endpoint = <&panel_in>;
+		};
+	};
+};
+
+&lradc {
+	fsl,lradc-touchscreen-wires = <4>;
+	fsl,ave-ctrl = <4>;
+	fsl,ave-delay = <2>;
+	fsl,settling = <10>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	at24@51 {
+		compatible = "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x51>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-supply = <&reg_fec_3v3>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP1_DATA3__GPIO_2_15
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_LCD_RESET__GPIO_3_30
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_AUART2_TX__GPIO_3_9
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pin_gpio3_5: led_gpio3_5@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	gpmi_pins_evk: gpmi-nand-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_CE1N__GPMI_CE1N
+			MX28_PAD_GPMI_RDY1__GPMI_READY1
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_evk: lcdif-evk@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_RD_E__LCD_VSYNC
+			MX28_PAD_LCD_WR_RWN__LCD_HSYNC
+			MX28_PAD_LCD_RS__LCD_DOTCLK
+			MX28_PAD_LCD_CS__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		&mmc0_cd_cfg &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio2 12 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp1 {
+	compatible = "fsl,imx28-mmc";
+	bus-width = <8>;
+	wp-gpios = <&gpio0 28 0>;
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&usb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_id_pins_a>;
+	vbus-supply = <&reg_usb0_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-lwe.dtsi b/arch/arm/boot/dts/imx28-lwe.dtsi
new file mode 100644
index 000000000000..bb971e660db8
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-lwe.dtsi
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+
+/ {
+	aliases {
+		spi2 = &ssp3;
+	};
+
+	chosen {
+		bootargs = "root=/dev/mmcblk0p2 rootfstype=ext4 ro rootwait console=ttyAMA0,115200 panic=1";
+	};
+
+	memory@40000000 {
+		reg = <0x40000000 0x08000000>;
+	};
+
+	reg_3v3: regulator-reg-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_5v: regulator-reg-usb-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_fec_3v3: regulator-reg-fec-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "fec-phy";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	#sound-dai-cells = <0>;
+	assigned-clocks = <&clks 53>;
+	assigned-clock-rates = <12000000>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
+&spi3_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_AUART2_RX__SSP3_D4
+		MX28_PAD_AUART2_TX__SSP3_D5
+		MX28_PAD_SSP3_SCK__SSP3_SCK
+		MX28_PAD_SSP3_MOSI__SSP3_CMD
+		MX28_PAD_SSP3_MISO__SSP3_D0
+		MX28_PAD_SSP3_SS0__SSP3_D3
+		MX28_PAD_AUART2_TX__GPIO_3_9
+	>;
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3v3>;
+	non-removable;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&ssp3 {
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi3_pins_a>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "u-boot";
+				reg = <0 0x80000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "env0";
+				reg = <0x80000 0x10000>;
+			};
+
+			partition@90000 {
+				label = "env1";
+				reg = <0x90000 0x10000>;
+			};
+
+			partition@100000 {
+				label = "kernel";
+				reg = <0x100000 0x400000>;
+			};
+
+			partition@500000 {
+				label = "swupdate";
+				reg = <0x500000 0x800000>;
+			};
+		};
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>, <&usb0_id_pins_a>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb_5v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_b>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi
index 759cc56253dd..c08b14ad7cd5 100644
--- a/arch/arm/boot/dts/imx28-m28.dtsi
+++ b/arch/arm/boot/dts/imx28-m28.dtsi
@@ -1,75 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx28.dtsi"
 
 / {
-	model = "DENX M28";
-	compatible = "denx,m28", "fsl,imx28";
+	model = "Aries/DENX M28";
+	compatible = "aries,m28", "denx,m28", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "bootloader";
-					reg = <0x00000000 0x00300000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "environment";
-					reg = <0x00300000 0x00080000>;
-				};
-
-				partition@2 {
-					label = "redundant-environment";
-					reg = <0x00380000 0x00080000>;
-				};
-
-				partition@3 {
-					label = "kernel";
-					reg = <0x00400000 0x00400000>;
-				};
-
-				partition@4 {
-					label = "filesystem";
-					reg = <0x00800000 0x0f800000>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@68 {
-					compatible = "stm,m41t62";
-					reg = <0x68>;
-				};
-			};
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -85,3 +29,22 @@
 		};
 	};
 };
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28cu3.dts b/arch/arm/boot/dts/imx28-m28cu3.dts
index 2df63bee6f4e..6b01de9efd02 100644
--- a/arch/arm/boot/dts/imx28-m28cu3.dts
+++ b/arch/arm/boot/dts/imx28-m28cu3.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,191 +10,11 @@
 	model = "MSR M28CU3";
 	compatible = "msr,m28cu3", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			gpmi-nand@8000c000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				pinctrl-names = "default";
-				pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
-				status = "okay";
-
-				partition@0 {
-					label = "gpmi-nfc-0-boot";
-					reg = <0x00000000 0x01400000>;
-					read-only;
-				};
-
-				partition@1 {
-					label = "gpmi-nfc-general-use";
-					reg = <0x01400000 0x0ec00000>;
-				};
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc2_4bit_pins_a
-					     &mmc2_cd_cfg
-					     &mmc2_sck_cfg>;
-				bus-width = <4>;
-				vmmc-supply = <&reg_vddio_sd1>;
-				status = "okay";
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP2_SS0__GPIO_2_19
-						MX28_PAD_PWM4__GPIO_3_29
-						MX28_PAD_AUART2_RX__GPIO_3_8
-						MX28_PAD_ENET0_RX_CLK__GPIO_4_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_VSYNC__LCD_VSYNC
-						MX28_PAD_LCD_HSYNC__LCD_HSYNC
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_RESET__LCD_RESET
-						MX28_PAD_LCD_CS__LCD_ENABLE
-						MX28_PAD_AUART1_TX__GPIO_3_5
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				led_pins_gpio: leds-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_SSP3_MISO__GPIO_2_26
-						MX28_PAD_SSP3_SCK__GPIO_2_24
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			ocotp@8002c000 {
-				status = "okay";
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <32>;
-					bus-width = <24>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <6410256>;
-							hactive = <320>;
-							vactive = <240>;
-							hback-porch = <38>;
-							hfront-porch = <20>;
-							vback-porch = <15>;
-							vfront-porch = <5>;
-							hsync-len = <30>;
-							vsync-len = <3>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-		};
-
-		apbx@80040000 {
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_b>;
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
-				status = "okay";
-			};
-
-			auart3: serial@80070000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart3_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm3_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			disable-over-current;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			phy-reset-gpios = <&gpio4 13 0>;
-			phy-reset-duration = <100>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 3 5000000>;
@@ -269,3 +83,176 @@
 		};
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_2pins_a>;
+	status = "okay";
+};
+
+&auart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart3_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_b>;
+	status = "okay";
+};
+
+&gpmi {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>;
+	status = "okay";
+
+	partition@0 {
+		label = "gpmi-nfc-0-boot";
+		reg = <0x00000000 0x01400000>;
+		read-only;
+	};
+
+	partition@1 {
+		label = "gpmi-nfc-general-use";
+		reg = <0x01400000 0x0ec00000>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <32>;
+		bus-width = <24>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <6410256>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vfront-porch = <5>;
+				hsync-len = <30>;
+				vsync-len = <3>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	phy-reset-gpios = <&gpio4 13 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <100>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&ocotp {
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP2_SS0__GPIO_2_19
+			MX28_PAD_PWM4__GPIO_3_29
+			MX28_PAD_AUART2_RX__GPIO_3_8
+			MX28_PAD_ENET0_RX_CLK__GPIO_4_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_VSYNC__LCD_VSYNC
+			MX28_PAD_LCD_HSYNC__LCD_HSYNC
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_RESET__LCD_RESET
+			MX28_PAD_LCD_CS__LCD_ENABLE
+			MX28_PAD_AUART1_TX__GPIO_3_5
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	led_pins_gpio: leds-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_SSP3_MISO__GPIO_2_26
+			MX28_PAD_SSP3_SCK__GPIO_2_24
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_4bit_pins_a
+		     &mmc2_cd_cfg
+		     &mmc2_sck_cfg_a>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd1>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index e35cc6ba3ca6..e350d57a4cec 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -1,233 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
+
  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
 #include "imx28-m28.dtsi"
 
 / {
-	model = "DENX M28EVK";
-	compatible = "denx,m28evk", "fsl,imx28";
-
-	apb@80000000 {
-		apbh@80000000 {
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_8bit_pins_a
-					     &mmc0_cd_cfg
-					     &mmc0_sck_cfg>;
-				bus-width = <8>;
-				wp-gpios = <&gpio3 10 0>;
-				vmmc-supply = <&reg_vddio_sd0>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "m25p80";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_PWM3__GPIO_3_28
-						MX28_PAD_AUART2_CTS__GPIO_3_10
-						MX28_PAD_AUART2_RTS__GPIO_3_11
-						MX28_PAD_AUART3_RX__GPIO_3_12
-						MX28_PAD_AUART3_TX__GPIO_3_13
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-				lcdif_pins_m28: lcdif-m28@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
-						MX28_PAD_LCD_ENABLE__LCD_ENABLE
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-			};
-
-			lcdif@80030000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&lcdif_24bit_pins_a
-					     &lcdif_pins_m28>;
-				display = <&display0>;
-				status = "okay";
-
-				display0: display0 {
-					bits-per-pixel = <16>;
-					bus-width = <18>;
-
-					display-timings {
-						native-mode = <&timing0>;
-						timing0: timing0 {
-							clock-frequency = <33260000>;
-							hactive = <800>;
-							vactive = <480>;
-							hback-porch = <0>;
-							hfront-porch = <256>;
-							vback-porch = <0>;
-							vfront-porch = <45>;
-							hsync-len = <1>;
-							vsync-len = <1>;
-							hsync-active = <0>;
-							vsync-active = <0>;
-							de-active = <1>;
-							pixelclk-active = <1>;
-						};
-					};
-				};
-			};
-
-			can0: can@80032000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can0_pins_a>;
-				status = "okay";
-			};
-
-			can1: can@80034000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&can1_pins_a>;
-				status = "okay";
-			};
-		};
-
-		apbx@80040000 {
-			saif0: saif@80042000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif0_pins_a>;
-				status = "okay";
-			};
-
-			saif1: saif@80046000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&saif1_pins_a>;
-				fsl,saif-master = <&saif0>;
-				status = "okay";
-			};
-
-			i2c0: i2c@80058000 {
-				sgtl5000: codec@0a {
-					compatible = "fsl,sgtl5000";
-					reg = <0x0a>;
-					VDDA-supply = <&reg_3p3v>;
-					VDDIO-supply = <&reg_3p3v>;
-					clocks = <&saif0>;
-				};
-
-				eeprom: eeprom@51 {
-					compatible = "atmel,24c128";
-					reg = <0x51>;
-					pagesize = <32>;
-				};
-			};
-
-			lradc@80050000 {
-				status = "okay";
-				fsl,lradc-touchscreen-wires = <4>;
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			usbphy1: usbphy@8007e000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-
-			auart1: serial@8006c000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart1_pins_a>;
-				status = "okay";
-			};
-
-			auart2: serial@8006e000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart2_2pins_b>;
-				status = "okay";
-			};
-
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_a>;
-			status = "okay";
-		};
-
-		usb1: usb@80090000 {
-			vbus-supply = <&reg_usb1_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb1_pins_a>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			clocks = <&clks 57>, <&clks 57>;
-			clock-names = "ipg", "ahb";
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
+	model = "Aries/DENX M28EVK";
+	compatible = "aries,m28evk", "denx,m28evk", "fsl,imx28";
 
 	backlight {
 		compatible = "pwm-backlight";
@@ -273,3 +55,209 @@
 		audio-codec = <&sgtl5000>;
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&auart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart1_pins_a>;
+	status = "okay";
+};
+
+&auart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart2_2pins_b>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+		clocks = <&saif0>;
+	};
+
+	eeprom: eeprom@51 {
+		compatible = "atmel,24c128";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&lcdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&lcdif_24bit_pins_a
+		     &lcdif_pins_m28>;
+	display = <&display0>;
+	status = "okay";
+
+	display0: display0 {
+		bits-per-pixel = <16>;
+		bus-width = <18>;
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <33260000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <0>;
+				hfront-porch = <256>;
+				vback-porch = <0>;
+				vfront-porch = <45>;
+				hsync-len = <1>;
+				vsync-len = <1>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
+		};
+	};
+};
+
+&lradc {
+	status = "okay";
+	fsl,lradc-touchscreen-wires = <4>;
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can0_pins_a>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	clocks = <&clks 57>, <&clks 57>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+			MX28_PAD_AUART2_CTS__GPIO_3_10
+			MX28_PAD_AUART2_RTS__GPIO_3_11
+			MX28_PAD_AUART3_RX__GPIO_3_12
+			MX28_PAD_AUART3_TX__GPIO_3_13
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	lcdif_pins_m28: lcdif-m28@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_LCD_DOTCLK__LCD_DOTCLK
+			MX28_PAD_LCD_ENABLE__LCD_ENABLE
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm4_pins_a>;
+	status = "okay";
+};
+
+&saif0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif0_pins_a>;
+	status = "okay";
+};
+
+&saif1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&saif1_pins_a>;
+	fsl,saif-master = <&saif0>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_8bit_pins_a
+		     &mmc0_cd_cfg
+		     &mmc0_sck_cfg>;
+	bus-width = <8>;
+	wp-gpios = <&gpio3 10 0>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "m25p80", "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb1_pins_a>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-pinfunc.h b/arch/arm/boot/dts/imx28-pinfunc.h
index e11f69ba0fe4..d427e6c2fa78 100644
--- a/arch/arm/boot/dts/imx28-pinfunc.h
+++ b/arch/arm/boot/dts/imx28-pinfunc.h
@@ -1,14 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Header providing constants for i.MX28 pinctrl bindings.
  *
  * Copyright (C) 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DT_BINDINGS_MX28_PINCTRL_H__
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 0ce3cb8e7914..5d74a68c56ff 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2012 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,115 +10,11 @@
 	model = "SchulerControl GmbH, SC SPS 1";
 	compatible = "schulercontrol,imx28-sps1", "fsl,imx28";
 
-	memory {
+	memory@40000000 {
+		device_type = "memory";
 		reg = <0x40000000 0x08000000>;
 	};
 
-	apb@80000000 {
-		apbh@80000000 {
-			pinctrl@80018000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&hog_pins_a>;
-
-				hog_pins_a: hog-gpios@0 {
-					reg = <0>;
-					fsl,pinmux-ids = <
-						MX28_PAD_GPMI_D00__GPIO_0_0
-						MX28_PAD_GPMI_D03__GPIO_0_3
-						MX28_PAD_GPMI_D06__GPIO_0_6
-					>;
-					fsl,drive-strength = <MXS_DRIVE_4mA>;
-					fsl,voltage = <MXS_VOLTAGE_HIGH>;
-					fsl,pull-up = <MXS_PULL_DISABLE>;
-				};
-
-			};
-
-			ssp0: ssp@80010000 {
-				compatible = "fsl,imx28-mmc";
-				pinctrl-names = "default";
-				pinctrl-0 = <&mmc0_4bit_pins_a>;
-				bus-width = <4>;
-				status = "okay";
-			};
-
-			ssp2: ssp@80014000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx28-spi";
-				pinctrl-names = "default";
-				pinctrl-0 = <&spi2_pins_a>;
-				status = "okay";
-
-				flash: m25p80@0 {
-					#address-cells = <1>;
-					#size-cells = <1>;
-					compatible = "everspin,mr25h256", "mr25h256";
-					spi-max-frequency = <40000000>;
-					reg = <0>;
-				};
-			};
-		};
-
-		apbx@80040000 {
-			i2c0: i2c@80058000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&i2c0_pins_a>;
-				status = "okay";
-
-				rtc: rtc@51 {
-					compatible = "nxp,pcf8563";
-					reg = <0x51>;
-				};
-
-				eeprom: eeprom@52 {
-					compatible = "atmel,24c64";
-					reg = <0x52>;
-					pagesize = <32>;
-				};
-			};
-
-			duart: serial@80074000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&duart_pins_a>;
-				status = "okay";
-			};
-
-			usbphy0: usbphy@8007c000 {
-				status = "okay";
-			};
-
-			auart0: serial@8006a000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_pins_a>;
-				status = "okay";
-			};
-		};
-	};
-
-	ahb@80080000 {
-		usb0: usb@80080000 {
-			vbus-supply = <&reg_usb0_vbus>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb0_pins_b>;
-			status = "okay";
-		};
-
-		mac0: ethernet@800f0000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac0_pins_a>;
-			status = "okay";
-		};
-
-		mac1: ethernet@800f4000 {
-			phy-mode = "rmii";
-			pinctrl-names = "default";
-			pinctrl-0 = <&mac1_pins_a>;
-			status = "okay";
-		};
-	};
-
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -169,3 +59,99 @@
 
 	};
 };
+
+&auart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&auart0_pins_a>;
+	status = "okay";
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+
+	rtc: rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	eeprom: eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+		pagesize = <32>;
+	};
+};
+
+&mac0 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac0_pins_a>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "rmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mac1_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a>;
+
+	hog_pins_a: hog-gpios@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D06__GPIO_0_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssp2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	compatible = "fsl,imx28-spi";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+
+	flash: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "everspin,mr25h256", "mr25h256";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&usb0 {
+	vbus-supply = <&reg_usb0_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins_b>;
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-ts4600.dts b/arch/arm/boot/dts/imx28-ts4600.dts
new file mode 100644
index 000000000000..ae6ed5c41be3
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-ts4600.dts
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Savoir-Faire Linux
+ * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+ */
+
+/dts-v1/;
+#include "imx28.dtsi"
+#include "dt-bindings/gpio/gpio.h"
+
+/ {
+
+	model = "Technologic Systems i.MX28 TS-4600";
+	compatible = "technologic,imx28-ts4600", "fsl,imx28";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x10000000>;   /* 256MB */
+	};
+
+	reg_vddio_sd0: regulator-vddio-sd0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vddio-sd0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 28 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&duart {
+	pinctrl-names = "default";
+	pinctrl-0 = <&duart_pins_a>;
+	status = "okay";
+};
+
+&pinctrl {
+	en_sd_pwr: en-sd-pwr@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_PWM3__GPIO_3_28
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2_pins_a>;
+	status = "okay";
+};
+
+&ssp0 {
+	compatible = "fsl,imx28-mmc";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_4bit_pins_a
+		     &mmc0_sck_cfg
+		     &en_sd_pwr>;
+	broken-cd;
+	bus-width = <4>;
+	vmmc-supply = <&reg_vddio_sd0>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index a5b27c85a91c..ffe58c7093e1 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -1,18 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
  * Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
  */
 
 /dts-v1/;
 #include "imx28.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	model = "Ka-Ro electronics TX28 module";
@@ -34,8 +29,9 @@
 		usbotg = &usb0;
 	};
 
-	memory {
-		reg = <0 0>; /* will be filled in by U-Boot */
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0>; /* will be filled in by U-Boot */
 	};
 
 	onewire {
@@ -44,93 +40,75 @@
 		status = "disabled";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_usb0_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb0_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb0_vbus: regulator-usb0-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb0_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usb1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb1_vbus: regulator-usb1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_2p5v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_can_xcvr: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
-		};
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
+	};
 
-		reg_lcd: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LCD POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_lcd: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_lcd_reset: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "LCD RESET";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
-			startup-delay-us = <300000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-		};
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <300000>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
 	};
 
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		mclk: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
 	};
 
 	sound {
@@ -172,7 +150,7 @@
 		default-brightness-level = <50>;
 	};
 
-	matrix_keypad: matrix-keypad@0 {
+	matrix_keypad: matrix-keypad {
 		compatible = "gpio-matrix-keypad";
 		col-gpios = <
 			&gpio5 0 GPIO_ACTIVE_HIGH
@@ -201,13 +179,13 @@
 			0x02020049 /* row 2, col 2, KEY_KP9 */
 		>;
 		gpio-activelow;
-		linux,wakeup;
+		wakeup-source;
 		debounce-delay-ms = <100>;
 		col-scan-delay-us = <5000>;
 		linux,no-autorepeat;
 	};
 
-	spi_gpio: spi-gpio {
+	spi_gpio: spi {
 		compatible = "spi-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -225,24 +203,6 @@
 		>;
 		/* enable this and disable ssp3 below, if you need full duplex SPI transfer */
 		status = "disabled";
-
-		spi@0 {
-			compatible = "spidev";
-			reg = <0>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@1 {
-			compatible = "spidev";
-			reg = <1>;
-			spi-max-frequency = <57600000>;
-		};
-
-		spi@2 {
-			compatible = "spidev";
-			reg = <2>;
-			spi-max-frequency = <57600000>;
-		};
 	};
 };
 
@@ -297,7 +257,7 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	sgtl5000: sgtl5000@0a {
+	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 		VDDA-supply = <&reg_2p5v>;
@@ -311,7 +271,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -324,9 +284,10 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_edt_ft5x06_pins>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <5 0>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007@48 {
@@ -335,14 +296,16 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
 
 	ds1339: rtc@68 {
-		compatible = "mxim,ds1339";
+		compatible = "dallas,ds1339";
 		reg = <0x68>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
 	};
 };
 
@@ -511,7 +474,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins {
+	tx28_edt_ft5x06_pins: tx28-edt-ft5x06-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_SSP0_DATA6__GPIO_2_6 /* RESET */
 			MX28_PAD_SSP0_DATA5__GPIO_2_5 /* IRQ */
@@ -522,7 +486,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins {
+	tx28_flexcan_xcvr_pins: tx28-flexcan-xcvr-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_LCD_D00__GPIO_1_0
 		>;
@@ -531,7 +496,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_lcdif_23bit_pins: tx28-lcdif-23bit {
+	tx28_lcdif_23bit_pins: tx28-lcdif-23bit@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			/* LCD_D00 may be used as Flexcan Transceiver Enable on STK5-V5 */
 			MX28_PAD_LCD_D01__LCD_D1
@@ -563,7 +529,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl {
+	tx28_lcdif_ctrl_pins: tx28-lcdif-ctrl@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_LCD_ENABLE__GPIO_1_31 /* Enable */
 			MX28_PAD_LCD_RESET__GPIO_3_30  /* Reset */
@@ -573,7 +540,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins {
+	tx28_mac0_pins_gpio: tx28-mac0-gpio-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_ENET0_MDC__GPIO_4_0
 			MX28_PAD_ENET0_MDIO__GPIO_4_1
@@ -590,7 +558,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_pca9554_pins: tx28-pca9554-pins {
+	tx28_pca9554_pins: tx28-pca9554-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_PWM3__GPIO_3_28
 		>;
@@ -599,7 +568,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_spi_gpio_pins: spi-gpiogrp {
+	tx28_spi_gpio_pins: spi-gpiogrp@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_AUART2_RX__GPIO_3_8
 			MX28_PAD_AUART2_TX__GPIO_3_9
@@ -613,7 +583,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_tsc2007_pins: tx28-tsc2007-pins {
+	tx28_tsc2007_pins: tx28-tsc2007-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_SAIF0_MCLK__GPIO_3_20 /* TSC2007 IRQ */
 		>;
@@ -623,7 +594,8 @@
 	};
 
 
-	tx28_usbphy0_pins: tx28-usbphy0-pins {
+	tx28_usbphy0_pins: tx28-usbphy0-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_GPMI_CE2N__GPIO_0_18 /* USBOTG_VBUSEN */
 			MX28_PAD_GPMI_CE3N__GPIO_0_19 /* USBOTH_OC */
@@ -633,7 +605,8 @@
 		fsl,pull-up = <MXS_PULL_DISABLE>;
 	};
 
-	tx28_usbphy1_pins: tx28-usbphy1-pins {
+	tx28_usbphy1_pins: tx28-usbphy1-pins@0 {
+		reg = <0>;
 		fsl,pinmux-ids = <
 			MX28_PAD_SPDIF__GPIO_3_27 /* USBH_VBUSEN */
 			MX28_PAD_JTAG_RTCK__GPIO_4_20 /* USBH_OC */
@@ -673,24 +646,6 @@
 	pinctrl-0 = <&spi3_pins_a>;
 	clock-frequency = <57600000>;
 	status = "okay";
-
-	spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <57600000>;
-	};
-
-	spi@2 {
-		compatible = "spidev";
-		reg = <2>;
-		spi-max-frequency = <57600000>;
-	};
 };
 
 &usb0 {
diff --git a/arch/arm/boot/dts/imx28-xea.dts b/arch/arm/boot/dts/imx28-xea.dts
new file mode 100644
index 000000000000..a400c108f66a
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-xea.dts
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx28-lwe.dtsi"
+
+/ {
+	compatible = "lwn,imx28-xea", "fsl,imx28";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&can1_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hog_pins_a &hog_pins_tiva>;
+
+	hog_pins_a: hog@0 {
+		reg = <0>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D00__GPIO_0_0
+			MX28_PAD_GPMI_D02__GPIO_0_2
+			MX28_PAD_GPMI_D05__GPIO_0_5
+			MX28_PAD_GPMI_CE1N__GPIO_0_17
+			MX28_PAD_GPMI_RDY0__GPIO_0_20
+			MX28_PAD_GPMI_RDY1__GPIO_0_21
+			MX28_PAD_GPMI_RDY2__GPIO_0_22
+			MX28_PAD_GPMI_RDN__GPIO_0_24
+			MX28_PAD_GPMI_CLE__GPIO_0_27
+			MX28_PAD_LCD_VSYNC__GPIO_1_28
+			MX28_PAD_SSP1_SCK__GPIO_2_12
+			MX28_PAD_SSP1_CMD__GPIO_2_13
+			MX28_PAD_SSP2_SS1__GPIO_2_20
+			MX28_PAD_SSP2_SS2__GPIO_2_21
+			MX28_PAD_LCD_D00__GPIO_1_0
+			MX28_PAD_LCD_D01__GPIO_1_1
+			MX28_PAD_LCD_D02__GPIO_1_2
+			MX28_PAD_LCD_D03__GPIO_1_3
+			MX28_PAD_LCD_D04__GPIO_1_4
+			MX28_PAD_LCD_D05__GPIO_1_5
+			MX28_PAD_LCD_D06__GPIO_1_6
+		>;
+		fsl,drive-strength = <MXS_DRIVE_4mA>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_tiva: hog@1 {
+		reg = <1>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_RDY3__GPIO_0_23
+			MX28_PAD_GPMI_WRN__GPIO_0_25
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+
+	hog_pins_coding: hog@2 {
+		reg = <2>;
+		fsl,pinmux-ids = <
+			MX28_PAD_GPMI_D01__GPIO_0_1
+			MX28_PAD_GPMI_D03__GPIO_0_3
+			MX28_PAD_GPMI_D04__GPIO_0_4
+			MX28_PAD_GPMI_D06__GPIO_0_6
+			MX28_PAD_GPMI_D07__GPIO_0_7
+		>;
+		fsl,voltage = <MXS_VOLTAGE_HIGH>;
+		fsl,pull-up = <MXS_PULL_DISABLE>;
+	};
+};
+
+&reg_fec_3v3 {
+	gpio = <&gpio0 0 0>;
+};
+
+&reg_usb_5v {
+	gpio = <&gpio0 2 0>;
+};
+
+&spi2_pins_a {
+	fsl,pinmux-ids = <
+		MX28_PAD_SSP2_SCK__SSP2_SCK
+		MX28_PAD_SSP2_MOSI__SSP2_CMD
+		MX28_PAD_SSP2_MISO__SSP2_D0
+		MX28_PAD_SSP2_SS0__GPIO_2_19
+	>;
+};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4e073e854742..a8d3c3113e0f 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -1,20 +1,21 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/gpio/gpio.h>
-#include "skeleton.dtsi"
 #include "imx28-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
 	interrupt-parent = <&icoll>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
 
 	aliases {
 		ethernet0 = &mac0;
@@ -38,12 +39,13 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
+		cpu@0 {
 			compatible = "arm,arm926ej-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -83,10 +85,6 @@
 					      88 88 88 88
 					      88 88 88 88
 					      87 86 0 0>;
-				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
-						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
-						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
-						  "hsadc", "lcdif", "empty", "empty";
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 25>;
@@ -98,7 +96,7 @@
 				status = "disabled";
 			};
 
-			gpmi: gpmi-nand@8000c000 {
+			gpmi: nand-controller@8000c000 {
 				compatible = "fsl,imx28-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -108,12 +106,14 @@
 				interrupt-names = "bch";
 				clocks = <&clks 50>;
 				clock-names = "gpmi_io";
+				assigned-clocks = <&clks 13>;
+				assigned-clock-parents = <&clks 10>;
 				dmas = <&dma_apbh 4>;
 				dma-names = "rx-tx";
 				status = "disabled";
 			};
 
-			ssp0: ssp@80010000 {
+			ssp0: spi@80010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80010000 0x2000>;
@@ -124,7 +124,7 @@
 				status = "disabled";
 			};
 
-			ssp1: ssp@80012000 {
+			ssp1: spi@80012000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80012000 0x2000>;
@@ -135,7 +135,7 @@
 				status = "disabled";
 			};
 
-			ssp2: ssp@80014000 {
+			ssp2: spi@80014000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80014000 0x2000>;
@@ -146,7 +146,7 @@
 				status = "disabled";
 			};
 
-			ssp3: ssp@80016000 {
+			ssp3: spi@80016000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x80016000 0x2000>;
@@ -165,6 +165,7 @@
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <0>;
 					interrupts = <127>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -174,6 +175,7 @@
 
 				gpio1: gpio@1 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <1>;
 					interrupts = <126>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -183,6 +185,7 @@
 
 				gpio2: gpio@2 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <2>;
 					interrupts = <125>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -192,6 +195,7 @@
 
 				gpio3: gpio@3 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <3>;
 					interrupts = <124>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -201,6 +205,7 @@
 
 				gpio4: gpio@4 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
+					reg = <4>;
 					interrupts = <123>;
 					gpio-controller;
 					#gpio-cells = <2>;
@@ -267,7 +272,8 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				gpmi_status_cfg: gpmi-status-cfg {
+				gpmi_status_cfg: gpmi-status-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_GPMI_RDN__GPMI_RDN
 						MX28_PAD_GPMI_WRN__GPMI_WRN
@@ -405,6 +411,17 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				auart4_2pins_b: auart4@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_AUART0_CTS__AUART4_RX
+						MX28_PAD_AUART0_RTS__AUART4_TX
+					>;
+					fsl,drive-strength = <MXS_DRIVE_4mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -423,6 +440,32 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
+				mac0_pins_b: mac0@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_ENET0_MDC__ENET0_MDC
+						MX28_PAD_ENET0_MDIO__ENET0_MDIO
+						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
+						MX28_PAD_ENET0_RXD0__ENET0_RXD0
+						MX28_PAD_ENET0_RXD1__ENET0_RXD1
+						MX28_PAD_ENET0_RXD2__ENET0_RXD2
+						MX28_PAD_ENET0_RXD3__ENET0_RXD3
+						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
+						MX28_PAD_ENET0_TXD0__ENET0_TXD0
+						MX28_PAD_ENET0_TXD1__ENET0_TXD1
+						MX28_PAD_ENET0_TXD2__ENET0_TXD2
+						MX28_PAD_ENET0_TXD3__ENET0_TXD3
+						MX28_PAD_ENET_CLK__CLKCTRL_ENET
+						MX28_PAD_ENET0_COL__ENET0_COL
+						MX28_PAD_ENET0_CRS__ENET0_CRS
+						MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK
+						MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK
+						>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
 				mac1_pins_a: mac1@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -474,14 +517,16 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc0_cd_cfg: mmc0-cd-cfg {
+				mmc0_cd_cfg: mmc0-cd-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 					>;
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				mmc0_sck_cfg: mmc0-sck-cfg {
+				mmc0_sck_cfg: mmc0-sck-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP0_SCK__SSP0_SCK
 					>;
@@ -505,14 +550,16 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc1_cd_cfg: mmc1-cd-cfg {
+				mmc1_cd_cfg: mmc1-cd-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 					>;
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				mmc1_sck_cfg: mmc1-sck-cfg {
+				mmc1_sck_cfg: mmc1-sck-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_GPMI_WRN__SSP1_SCK
 					>;
@@ -537,14 +584,32 @@
 					fsl,pull-up = <MXS_PULL_ENABLE>;
 				};
 
-				mmc2_cd_cfg: mmc2-cd-cfg {
+				mmc2_4bit_pins_b: mmc2-4bit@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+						MX28_PAD_SSP2_MOSI__SSP2_CMD
+						MX28_PAD_SSP2_MISO__SSP2_D0
+						MX28_PAD_SSP2_SS0__SSP2_D3
+						MX28_PAD_SSP2_SS1__SSP2_D1
+						MX28_PAD_SSP2_SS2__SSP2_D2
+						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_8mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_ENABLE>;
+				};
+
+				mmc2_cd_cfg: mmc2-cd-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 					>;
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
-				mmc2_sck_cfg: mmc2-sck-cfg {
+				mmc2_sck_cfg_a: mmc2-sck-cfg@0 {
+					reg = <0>;
 					fsl,pinmux-ids = <
 						MX28_PAD_SSP0_DATA7__SSP2_SCK
 					>;
@@ -552,6 +617,15 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				mmc2_sck_cfg_b: mmc2-sck-cfg@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_SSP2_SCK__SSP2_SCK
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				i2c0_pins_a: i2c0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -872,6 +946,16 @@
 					fsl,pull-up = <MXS_PULL_DISABLE>;
 				};
 
+				usb1_pins_b: usb1@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						MX28_PAD_PWM2__USB1_OVERCURRENT
+					>;
+					fsl,drive-strength = <MXS_DRIVE_12mA>;
+					fsl,voltage = <MXS_VOLTAGE_HIGH>;
+					fsl,pull-up = <MXS_PULL_DISABLE>;
+				};
+
 				usb0_id_pins_a: usb0id@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -913,16 +997,12 @@
 					      80 81 68 69
 					      70 71 72 73
 					      74 75 76 77>;
-				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
-						  "saif0", "saif1", "i2c0", "i2c1",
-						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
-						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 26>;
 			};
 
-			dcp: dcp@80028000 {
+			dcp: crypto@80028000 {
 				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
@@ -935,10 +1015,12 @@
 				status = "disabled";
 			};
 
-			ocotp: ocotp@8002c000 {
-				compatible = "fsl,ocotp";
+			ocotp: efuse@8002c000 {
+				compatible = "fsl,imx28-ocotp", "fsl,ocotp";
+				#address-cells = <1>;
+				#size-cells = <1>;
 				reg = <0x8002c000 0x2000>;
-				status = "disabled";
+				clocks = <&clks 25>;
 			};
 
 			axi-ahb@8002e000 {
@@ -957,7 +1039,7 @@
 			};
 
 			can0: can@80032000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx28-flexcan";
 				reg = <0x80032000 0x2000>;
 				interrupts = <8>;
 				clocks = <&clks 58>, <&clks 58>;
@@ -966,7 +1048,7 @@
 			};
 
 			can1: can@80034000 {
-				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx28-flexcan";
 				reg = <0x80034000 0x2000>;
 				interrupts = <9>;
 				clocks = <&clks 59>, <&clks 59>;
@@ -1024,6 +1106,7 @@
 			};
 
 			saif0: saif@80042000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx28-saif";
 				reg = <0x80042000 0x2000>;
 				interrupts = <59>;
@@ -1040,6 +1123,7 @@
 			};
 
 			saif1: saif@80046000 {
+				#sound-dai-cells = <0>;
 				compatible = "fsl,imx28-saif";
 				reg = <0x80046000 0x2000>;
 				interrupts = <58>;
@@ -1237,13 +1321,13 @@
 			status = "disabled";
 		};
 
-		etn_switch: switch@800f8000 {
+		eth_switch: switch@800f8000 {
 			reg = <0x800f8000 0x8000>;
 			status = "disabled";
 		};
 	};
 
-	iio_hwmon {
+	iio-hwmon {
 		compatible = "iio-hwmon";
 		io-channels = <&lradc 8>;
 	};
diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts
index 2424abfc9c7b..d87eee3f9b3c 100644
--- a/arch/arm/boot/dts/imx31-bug.dts
+++ b/arch/arm/boot/dts/imx31-bug.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,12 +10,13 @@
 	model = "Buglabs i.MX31 Bug 1.x";
 	compatible = "buglabs,imx31-bug", "fsl,imx31";
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128M */
 	};
 };
 
 &uart5 {
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx31-lite.dts b/arch/arm/boot/dts/imx31-lite.dts
new file mode 100644
index 000000000000..d17abdfb6330
--- /dev/null
+++ b/arch/arm/boot/dts/imx31-lite.dts
@@ -0,0 +1,178 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (C) 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+
+/dts-v1/;
+
+#include "imx31.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "LogicPD i.MX31 Lite";
+	compatible = "logicpd,imx31-lite", "fsl,imx31";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x8000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		};
+
+		led1 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&ata {
+	status = "okay";
+};
+
+&nfc {
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&sdhci1 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+	wp-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&spi2 {
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13783";
+		reg = <0>;
+		spi-cs-high;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_EDGE_RISING>;
+
+		fsl,mc13xxx-uses-adc;
+		fsl,mc13xxx-uses-rtc;
+
+		regulators {
+			sw1a {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw1b {		/* QVCC */
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2a {		/* 1.8V_DDR, NVCC2, NVCC21 and NVCC22 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			sw2b {		/* NVCC10 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			violo {		/* NVCC1 and NVCC7 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			viohi {		/* VIOHI */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vaudio {	/* VAUDIO */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vcam {		/* NVCC4 */
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vgen {		/* NVCC5 / NVCC8 and NVCC6 / NVCC9 */
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vmmc2 {		/* NVCC3 */
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+};
+
+&uart1 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart2 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Routed to the extension board */
+&uart3 {
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0x0 0x200000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x0000cf03 0xa0330d01 0x00220800>;
+	};
+
+	ethernet@4,0 {
+		compatible = "smsc,lan9117", "smsc,lan9115";
+		reg = <4 0x0 0x100>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+		phy-mode = "mii";
+		reg-io-width = <2>;
+		smsc,irq-push-pull;
+		fsl,weim-cs-timing = <0x00008701 0x04000541 0x00010000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi
index c34f82581248..95c05f17a6d5 100644
--- a/arch/arm/boot/dts/imx31.dtsi
+++ b/arch/arm/boot/dts/imx31.dtsi
@@ -1,56 +1,103 @@
-/*
- * Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2016-2018 Vladimir Zapolskiy <vz@mleia.com>
+// Copyright 2012 Denis 'GNUtoo' Carikli <GNUtoo@no-log.org>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		spi0 = &spi1;
+		spi1 = &spi2;
+		spi2 = &spi3;
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
-			compatible = "arm,arm1136";
+		cpu@0 {
+			compatible = "arm,arm1136jf-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
-	avic: avic-interrupt-controller@60000000 {
+	avic: interrupt-controller@68000000 {
 		compatible = "fsl,imx31-avic", "fsl,avic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
-		reg = <0x60000000 0x100000>;
+		reg = <0x68000000 0x100000>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&avic>;
 		ranges;
 
-		aips@43f00000 { /* AIPS1 */
+		iram: sram@1fffc000 {
+			compatible = "mmio-sram";
+			reg = <0x1fffc000 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x1fffc000 0x4000>;
+		};
+
+		aips1: bus@43f00000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x43f00000 0x100000>;
 			ranges;
 
+			i2c1: i2c@43f80000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f80000 0x4000>;
+				interrupts = <10>;
+				clocks = <&clks 33>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@43f84000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f84000 0x4000>;
+				interrupts = <3>;
+				clocks = <&clks 35>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			ata: ata@43f8c000 {
+				compatible = "fsl,imx31-pata", "fsl,imx27-pata";
+				reg = <0x43f8c000 0x4000>;
+				interrupts = <15>;
+				clocks = <&clks 26>;
+				status = "disabled";
+			};
+
 			uart1: serial@43f90000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43f90000 0x4000>;
@@ -69,6 +116,37 @@
 				status = "disabled";
 			};
 
+			i2c2: i2c@43f98000 {
+				compatible = "fsl,imx31-i2c", "fsl,imx21-i2c";
+				reg = <0x43f98000 0x4000>;
+				interrupts = <4>;
+				clocks = <&clks 34>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			spi1: spi@43fa4000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x43fa4000 0x4000>;
+				interrupts = <14>;
+				clocks = <&clks 10>, <&clks 53>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 8 8 0>, <&sdma 9 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx31-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 46>;
+				status = "disabled";
+			};
+
 			uart4: serial@43fb0000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x43fb0000 0x4000>;
@@ -88,13 +166,35 @@
 			};
 		};
 
-		spba@50000000 {
+		spba-bus@50000000 {
 			compatible = "fsl,spba-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x100000>;
 			ranges;
 
+			sdhci1: mmc@50004000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50004000 0x4000>;
+				interrupts = <9>;
+				clocks = <&clks 10>, <&clks 20>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 20 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
+			sdhci2: mmc@50008000 {
+				compatible = "fsl,imx31-mmc";
+				reg = <0x50008000 0x4000>;
+				interrupts = <8>;
+				clocks = <&clks 10>, <&clks 21>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 21 3 0>;
+				dma-names = "rx-tx";
+				status = "disabled";
+			};
+
 			uart3: serial@5000c000 {
 				compatible = "fsl,imx31-uart", "fsl,imx21-uart";
 				reg = <0x5000c000 0x4000>;
@@ -104,28 +204,54 @@
 				status = "disabled";
 			};
 
-			iim: iim@5001c000 {
+			spi2: spi@50010000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x50010000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 10>, <&clks 54>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 6 8 0>, <&sdma 7 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
+			iim: efuse@5001c000 {
 				compatible = "fsl,imx31-iim", "fsl,imx27-iim";
 				reg = <0x5001c000 0x1000>;
 				interrupts = <19>;
 				clocks = <&clks 25>;
 			};
-
-			clks: ccm@53f80000{
-				compatible = "fsl,imx31-ccm";
-				reg = <0x53f80000 0x4000>;
-				interrupts = <0 31 0x04 0 53 0x04>;
-				#clock-cells = <1>;
-			};
 		};
 
-		aips@53f00000 { /* AIPS2 */
+		bus@53f00000 { /* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x53f00000 0x100000>;
 			ranges;
 
+			clks: ccm@53f80000{
+				compatible = "fsl,imx31-ccm";
+				reg = <0x53f80000 0x4000>;
+				interrupts = <31>, <53>;
+				#clock-cells = <1>;
+			};
+
+			spi3: spi@53f84000 {
+				compatible = "fsl,imx31-cspi";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <17>;
+				clocks = <&clks 10>, <&clks 28>;
+				clock-names = "ipg", "per";
+				dmas = <&sdma 10 8 0>, <&sdma 11 8 0>;
+				dma-names = "rx", "tx";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			gpt: timer@53f90000 {
 				compatible = "fsl,imx31-gpt";
 				reg = <0x53f90000 0x4000>;
@@ -133,6 +259,113 @@
 				clocks = <&clks 10>, <&clks 22>;
 				clock-names = "ipg", "per";
 			};
+
+			gpio3: gpio@53fa4000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <56>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			rng@53fb0000 {
+				compatible = "fsl,imx31-rnga";
+				reg = <0x53fb0000 0x4000>;
+				interrupts = <22>;
+				clocks = <&clks 29>;
+			};
+
+			gpio1: gpio@53fcc000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fcc000 0x4000>;
+				interrupts = <52>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53fd0000 {
+				compatible = "fsl,imx31-gpio";
+				reg = <0x53fd0000 0x4000>;
+				interrupts = <51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			sdma: dma-controller@53fd4000 {
+				compatible = "fsl,imx31-sdma";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <34>;
+				clocks = <&clks 10>, <&clks 27>;
+				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx31.bin";
+			};
+
+			rtc: rtc@53fd8000 {
+				compatible = "fsl,imx31-rtc", "fsl,imx21-rtc";
+				reg = <0x53fd8000 0x4000>;
+				interrupts = <25>;
+				clocks = <&clks 2>, <&clks 40>;
+				clock-names = "ref", "ipg";
+			};
+
+			wdog: watchdog@53fdc000 {
+				compatible = "fsl,imx31-wdt", "fsl,imx21-wdt";
+				reg = <0x53fdc000 0x4000>;
+				clocks = <&clks 41>;
+				interrupts = <55>;
+			};
+
+			pwm: pwm@53fe0000 {
+				compatible = "fsl,imx31-pwm", "fsl,imx27-pwm";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <26>;
+				clocks = <&clks 10>, <&clks 42>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+		};
+
+		emi@b8000000 { /* External Memory Interface */
+			compatible = "simple-bus";
+			reg = <0xb8000000 0x5000>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			nfc: nand@b8000000 {
+				compatible = "fsl,imx31-nand", "fsl,imx27-nand";
+				reg = <0xb8000000 0x1000>;
+				interrupts = <33>;
+				clocks = <&clks 9>;
+				dmas = <&sdma 30 17 0>;
+				dma-names = "rx-tx";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				status = "disabled";
+			};
+
+			weim: weim@b8002000 {
+				compatible = "fsl,imx31-weim", "fsl,imx27-weim";
+				reg = <0xb8002000 0x1000>;
+				clocks = <&clks 56>;
+				#address-cells = <2>;
+				#size-cells = <1>;
+				ranges = <0 0 0xa0000000 0x08000000
+					  1 0 0xa8000000 0x08000000
+					  2 0 0xb0000000 0x02000000
+					  3 0 0xb2000000 0x02000000
+					  4 0 0xb4000000 0x02000000
+					  5 0 0xb6000000 0x02000000>;
+				status = "disabled";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
index 9c2b715ab8bf..17bd2a97609a 100644
--- a/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 #include "imx35.dtsi"
@@ -17,7 +9,8 @@
 	model = "Eukrea CPUIMX35";
 	compatible = "eukrea,cpuimx35", "fsl,imx35";
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x8000000>; /* 128M */
 	};
 };
diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
index 75b036700d31..7f4f812b0811 100644
--- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
+++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
@@ -1,14 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
  */
 
 /dts-v1/;
@@ -21,16 +13,16 @@
 	model = "Eukrea CPUIMX35";
 	compatible = "eukrea,mbimxsd35-baseboard", "eukrea,cpuimx35", "fsl,imx35";
 
-	gpio_keys {
+	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_bp1>;
 
-		bp1 {
+		button {
 			label = "BP1";
 			gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,input-type = <1>;
 		};
 	};
@@ -65,7 +57,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 24>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -139,14 +131,14 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx35-pdk.dts b/arch/arm/boot/dts/imx35-pdk.dts
index 8d715523708f..ddce0a844758 100644
--- a/arch/arm/boot/dts/imx35-pdk.dts
+++ b/arch/arm/boot/dts/imx35-pdk.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- * Copyright 2014 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
+// Copyright 2014 Freescale Semiconductor, Inc.
 
 /dts-v1/;
 #include "imx35.dtsi"
@@ -17,7 +10,8 @@
 	model = "Freescale i.MX35 Product Development Kit";
 	compatible = "fsl,imx35-pdk", "fsl,imx35";
 
-	memory {
+	memory@80000000 {
+		device_type = "memory";
 		reg = <0x80000000 0x8000000>,
 		      <0x90000000 0x8000000>;
 	};
@@ -63,6 +57,6 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx35-pinfunc.h b/arch/arm/boot/dts/imx35-pinfunc.h
index 4911f2c405fa..9d6cc9564b72 100644
--- a/arch/arm/boot/dts/imx35-pinfunc.h
+++ b/arch/arm/boot/dts/imx35-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef __DTS_IMX35_PINFUNC_H
diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi
index b6478e97d6a7..d650f54c3fc6 100644
--- a/arch/arm/boot/dts/imx35.dtsi
+++ b/arch/arm/boot/dts/imx35.dtsi
@@ -1,22 +1,32 @@
-/*
- * Copyright 2012 Steffen Trumtrar, Pengutronix
- *
- * based on imx27.dtsi
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2012 Steffen Trumtrar, Pengutronix
+//
+// based on imx27.dtsi
+
 #include "imx35-pinfunc.h"
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
@@ -25,12 +35,13 @@
 	};
 
 	cpus {
-		#address-cells = <0>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu {
-			compatible = "arm,arm1136";
+		cpu@0 {
+			compatible = "arm,arm1136jf-s";
 			device_type = "cpu";
+			reg = <0>;
 		};
 	};
 
@@ -48,14 +59,14 @@
 		interrupt-parent = <&avic>;
 		ranges;
 
-		L2: l2-cache@30000000 {
+		L2: cache-controller@30000000 {
 			compatible = "arm,l210-cache";
 			reg = <0x30000000 0x1000>;
 			cache-unified;
 			cache-level = <2>;
 		};
 
-		aips1: aips@43f00000 {
+		aips1: bus@43f00000 {
 			compatible = "fsl,aips", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -126,7 +137,7 @@
 				status = "disabled";
 			};
 
-			spi1: cspi@43fa4000 {
+			spi1: spi@43fa4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx35-cspi";
@@ -137,6 +148,14 @@
 				status = "disabled";
 			};
 
+			kpp: kpp@43fa8000 {
+				compatible = "fsl,imx35-kpp", "fsl,imx21-kpp";
+				reg = <0x43fa8000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks 56>;
+				status = "disabled";
+			};
+
 			iomuxc: iomuxc@43fac000 {
 				compatible = "fsl,imx35-iomuxc";
 				reg = <0x43fac000 0x4000>;
@@ -159,7 +178,7 @@
 				status = "disabled";
 			};
 
-			spi2: cspi@50010000 {
+			spi2: spi@50010000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx35-cspi";
@@ -170,7 +189,7 @@
 				status = "disabled";
 			};
 
-			fec: fec@50038000 {
+			fec: ethernet@50038000 {
 				compatible = "fsl,imx35-fec", "fsl,imx27-fec";
 				reg = <0x50038000 0x4000>;
 				clocks = <&clks 46>, <&clks 8>;
@@ -180,7 +199,7 @@
 			};
 		};
 
-		aips2: aips@53f00000 {
+		aips2: bus@53f00000 {
 			compatible = "fsl,aips", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -212,7 +231,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			esdhc1: esdhc@53fb4000 {
+			esdhc1: mmc@53fb4000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fb4000 0x4000>;
 				interrupts = <7>;
@@ -221,7 +240,7 @@
 				status = "disabled";
 			};
 
-			esdhc2: esdhc@53fb8000 {
+			esdhc2: mmc@53fb8000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fb8000 0x4000>;
 				interrupts = <8>;
@@ -230,7 +249,7 @@
 				status = "disabled";
 			};
 
-			esdhc3: esdhc@53fbc000 {
+			esdhc3: mmc@53fbc000 {
 				compatible = "fsl,imx35-esdhc";
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <9>;
@@ -265,7 +284,7 @@
 				#interrupt-cells = <2>;
 			};
 
-			sdma: sdma@53fd4000 {
+			sdma: dma-controller@53fd4000 {
 				compatible = "fsl,imx35-sdma";
 				reg = <0x53fd4000 0x4000>;
 				clocks = <&clks 9>, <&clks 65>;
@@ -275,7 +294,7 @@
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
 			};
 
-			wdog: wdog@53fdc000 {
+			wdog: watchdog@53fdc000 {
 				compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
 				reg = <0x53fdc000 0x4000>;
 				clocks = <&clks 74>;
@@ -284,28 +303,36 @@
 			};
 
 			can1: can@53fe4000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fe4000 0x1000>;
-				clocks = <&clks 33>;
-				clock-names = "ipg";
+				clocks = <&clks 33>, <&clks 33>;
+				clock-names = "ipg", "per";
 				interrupts = <43>;
 				status = "disabled";
 			};
 
 			can2: can@53fe8000 {
-				compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fe8000 0x1000>;
-				clocks = <&clks 34>;
-				clock-names = "ipg";
+				clocks = <&clks 34>, <&clks 34>;
+				clock-names = "ipg", "per";
 				interrupts = <44>;
 				status = "disabled";
 			};
 
+			efuse@53ff0000 {
+				compatible = "fsl,imx35-iim";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <19>;
+				clocks = <&clks 80>;
+			};
+
 			usbotg: usb@53ff4000 {
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4000 0x0200>;
 				interrupts = <37>;
-				clocks = <&clks 73>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
@@ -315,7 +342,8 @@
 				compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 				reg = <0x53ff4400 0x0200>;
 				interrupts = <35>;
-				clocks = <&clks 73>;
+				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				fsl,usbphy = <&usbphy1>;
 				dr_mode = "host";
@@ -325,8 +353,6 @@
 			usbmisc: usbmisc@53ff4600 {
 				#index-cells = <1>;
 				compatible = "fsl,imx35-usbmisc";
-				clocks = <&clks 9>, <&clks 73>, <&clks 28>;
-				clock-names = "ipg", "ahb", "per";
 				reg = <0x53ff4600 0x00f>;
 			};
 		};
@@ -376,11 +402,13 @@
 		usbphy0: usb-phy@0 {
 			reg = <0>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 
 		usbphy1: usb-phy@1 {
 			reg = <1>;
 			compatible = "usb-nop-xceiv";
+			#phy-cells = <0>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts
index 1b22512c91bd..4ea5c23f181b 100644
--- a/arch/arm/boot/dts/imx50-evk.dts
+++ b/arch/arm/boot/dts/imx50-evk.dts
@@ -1,15 +1,8 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 /dts-v1/;
 #include "imx50.dtsi"
@@ -18,7 +11,8 @@
 	model = "Freescale i.MX50 Evaluation Kit";
 	compatible = "fsl,imx50-evk", "fsl,imx50";
 
-	memory {
+	memory@70000000 {
+		device_type = "memory";
 		reg = <0x70000000 0x80000000>;
 	};
 };
@@ -26,14 +20,13 @@
 &cspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>;
+	cs-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>, <&gpio4 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	flash: m25p32@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "m25p32", "m25p80";
+		compatible = "m25p32", "jedec,spi-nor";
 		spi-max-frequency = <25000000>;
 		reg = <1>;
 
@@ -54,7 +47,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 12 0>;
+	phy-reset-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -66,7 +59,7 @@
 				MX50_PAD_CSPI_MISO__CSPI_MISO		0x00
 				MX50_PAD_CSPI_MOSI__CSPI_MOSI		0x00
 				MX50_PAD_CSPI_SS0__GPIO4_11		0xc4
-				MX50_PAD_ECSPI1_MOSI__CSPI_SS1		0xf4
+				MX50_PAD_ECSPI1_MOSI__GPIO4_13		0x84
 			>;
 		};
 
@@ -106,14 +99,6 @@
 	status = "okay";
 };
 
-&usbh2 {
-	status = "okay";
-};
-
-&usbh3 {
-	status = "okay";
-};
-
 &usbotg {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
new file mode 100644
index 000000000000..467db6b4ed7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -0,0 +1,287 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 Jonathan Neuschäfer
+//
+// The Kobo Aura e-book reader, model N514. The mainboard is marked as E606F0B.
+
+/dts-v1/;
+#include "imx50.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Kobo Aura (N514)";
+	compatible = "kobo,aura", "fsl,imx50";
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x10000000>;
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-on {
+			label = "kobo_aura:orange:on";
+			gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
+			panic-indicator;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		event-hallsensor {
+			label = "Hallsensor";
+			gpios = <&gpio5 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESERVED>;
+			linux,input-type = <EV_SW>;
+		};
+
+		event-frontlight {
+			label = "Frontlight";
+			gpios = <&gpio4 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_DISPLAYTOGGLE>;
+		};
+	};
+
+	sd2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd2_reset>;
+		reset-gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
+	};
+
+	sd2_vmmc: gpio-regulator {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd2_vmmc>;
+		regulator-name = "vmmc";
+		states = <3300000 0>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-gpio = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <100000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd1>;
+	max-frequency = <50000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	status = "okay";
+
+	/* External µSD card */
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd2>;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	disable-wp;
+	mmc-pwrseq = <&sd2_pwrseq>;
+	vmmc-supply = <&sd2_vmmc>;
+	status = "okay";
+
+	/* CyberTan WC121 SDIO WiFi (BCM43362) */
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd3>;
+	bus-width = <8>;
+	non-removable;
+	max-frequency = <50000000>;
+	disable-wp;
+	status = "okay";
+
+	/* Internal eMMC */
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@15 {
+		reg = <0x15>;
+		compatible = "elan,ektf2132";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		power-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio5 13 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* TODO: TPS65185 PMIC for E Ink at 0x68 */
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	embedded-controller@43 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ec>;
+		compatible = "netronix,ntxec";
+		reg = <0x43>;
+		system-power-controller;
+		interrupts-extended = <&gpio4 11 IRQ_TYPE_EDGE_FALLING>;
+		#pwm-cells = <2>;
+	};
+};
+
+&iomuxc {
+	pinctrl_ec: ecgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_SS0__GPIO4_11		0x0	/* INT */
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeysgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_MISO__GPIO4_10		0x0
+			MX50_PAD_SD2_D7__GPIO5_15		0x0
+			MX50_PAD_KEY_ROW0__GPIO4_1		0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX50_PAD_I2C1_SCL__I2C1_SCL		0x400001fd
+			MX50_PAD_I2C1_SDA__I2C1_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX50_PAD_I2C2_SCL__I2C2_SCL		0x400001fd
+			MX50_PAD_I2C2_SDA__I2C2_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX50_PAD_I2C3_SCL__I2C3_SCL		0x400001fd
+			MX50_PAD_I2C3_SDA__I2C3_SDA		0x400001fd
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX50_PAD_PWM1__GPIO6_24			0x0
+		>;
+	};
+
+	pinctrl_sd1: sd1grp {
+		fsl,pins = <
+			MX50_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+			MX50_PAD_SD1_CLK__ESDHC1_CLK		0xd4
+			MX50_PAD_SD1_D0__ESDHC1_DAT0		0x1d4
+			MX50_PAD_SD1_D1__ESDHC1_DAT1		0x1d4
+			MX50_PAD_SD1_D2__ESDHC1_DAT2		0x1d4
+			MX50_PAD_SD1_D3__ESDHC1_DAT3		0x1d4
+
+			MX50_PAD_SD2_CD__GPIO5_17		0x0
+		>;
+	};
+
+	pinctrl_sd2: sd2grp {
+		fsl,pins = <
+			MX50_PAD_SD2_CMD__ESDHC2_CMD		0x1e4
+			MX50_PAD_SD2_CLK__ESDHC2_CLK		0xd4
+			MX50_PAD_SD2_D0__ESDHC2_DAT0		0x1d4
+			MX50_PAD_SD2_D1__ESDHC2_DAT1		0x1d4
+			MX50_PAD_SD2_D2__ESDHC2_DAT2		0x1d4
+			MX50_PAD_SD2_D3__ESDHC2_DAT3		0x1d4
+		>;
+	};
+
+	pinctrl_sd2_reset: sd2-resetgrp {
+		fsl,pins = <
+			MX50_PAD_ECSPI2_MOSI__GPIO4_17		0x0
+		>;
+	};
+
+	pinctrl_sd2_vmmc: sd2-vmmcgrp {
+		fsl,pins = <
+			MX50_PAD_ECSPI1_SCLK__GPIO4_12		0x0
+		>;
+	};
+
+	pinctrl_sd3: sd3grp {
+		fsl,pins = <
+			MX50_PAD_SD3_CMD__ESDHC3_CMD		0x1e4
+			MX50_PAD_SD3_CLK__ESDHC3_CLK		0xd4
+			MX50_PAD_SD3_D0__ESDHC3_DAT0		0x1d4
+			MX50_PAD_SD3_D1__ESDHC3_DAT1		0x1d4
+			MX50_PAD_SD3_D2__ESDHC3_DAT2		0x1d4
+			MX50_PAD_SD3_D3__ESDHC3_DAT3		0x1d4
+			MX50_PAD_SD3_D4__ESDHC3_DAT4		0x1d4
+			MX50_PAD_SD3_D5__ESDHC3_DAT5		0x1d4
+			MX50_PAD_SD3_D6__ESDHC3_DAT6		0x1d4
+			MX50_PAD_SD3_D7__ESDHC3_DAT7		0x1d4
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX50_PAD_CSPI_MOSI__GPIO4_9		0x0
+			MX50_PAD_SD2_D5__GPIO5_13		0x0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX50_PAD_UART2_TXD__UART2_TXD_MUX	0x1e4
+			MX50_PAD_UART2_RXD__UART2_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_usbphy: usbphygrp {
+		fsl,pins = <
+			MX50_PAD_ECSPI2_SS0__GPIO4_19		0x0
+		>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg {
+	phy_type = "utmi_wide";
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbphy>;
+	vbus-detect-gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/boot/dts/imx50-pinfunc.h b/arch/arm/boot/dts/imx50-pinfunc.h
index 97e6e7f4ebdd..5e6b30247543 100644
--- a/arch/arm/boot/dts/imx50-pinfunc.h
+++ b/arch/arm/boot/dts/imx50-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef __DTS_IMX50_PINFUNC_H
@@ -34,7 +30,7 @@
 #define MX50_PAD_KEY_ROW1__EIM_NANDF_CEN_1			0x02c 0x2d8 0x000 0x2 0x0
 #define MX50_PAD_KEY_ROW1__CTI_TRIGOUT_ACK7			0x02c 0x2d8 0x000 0x6 0x0
 #define MX50_PAD_KEY_ROW1__USBPHY1_RXERROR			0x02c 0x2d8 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL2__KPP_COL_1				0x030 0x2dc 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL2__KPP_COL_2				0x030 0x2dc 0x000 0x0 0x0
 #define MX50_PAD_KEY_COL2__GPIO4_4				0x030 0x2dc 0x000 0x1 0x0
 #define MX50_PAD_KEY_COL2__EIM_NANDF_CEN_2			0x030 0x2dc 0x000 0x2 0x0
 #define MX50_PAD_KEY_COL2__CTI_TRIGOUT6				0x030 0x2dc 0x000 0x6 0x0
@@ -44,7 +40,7 @@
 #define MX50_PAD_KEY_ROW2__EIM_NANDF_CEN_3			0x034 0x2e0 0x000 0x2 0x0
 #define MX50_PAD_KEY_ROW2__CTI_TRIGOUT7				0x034 0x2e0 0x000 0x6 0x0
 #define MX50_PAD_KEY_ROW2__USBPHY1_LINESTATE_0			0x034 0x2e0 0x000 0x7 0x0
-#define MX50_PAD_KEY_COL3__KPP_COL_2				0x038 0x2e4 0x000 0x0 0x0
+#define MX50_PAD_KEY_COL3__KPP_COL_3				0x038 0x2e4 0x000 0x0 0x0
 #define MX50_PAD_KEY_COL3__GPIO4_6				0x038 0x2e4 0x000 0x1 0x0
 #define MX50_PAD_KEY_COL3__EIM_NANDF_READY0			0x038 0x2e4 0x7b4 0x2 0x0
 #define MX50_PAD_KEY_COL3__SDMA_EXT_EVENT_0			0x038 0x2e4 0x7b8 0x6 0x0
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index e2457138311f..3d9a9f37f672 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -1,21 +1,23 @@
-/*
- * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
 #include "imx50-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/imx5-clock.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -24,11 +26,21 @@
 		gpio3 = &gpio4;
 		gpio4 = &gpio5;
 		gpio5 = &gpio6;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &esdhc1;
+		mmc1 = &esdhc2;
+		mmc2 = &esdhc3;
+		mmc3 = &esdhc4;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		spi0 = &ecspi1;
+		spi1 = &ecspi2;
+		spi2 = &cspi;
 	};
 
 	cpus {
@@ -41,7 +53,7 @@
 		};
 	};
 
-	tzic: tz-interrupt-controller@0fffc000 {
+	tzic: tz-interrupt-controller@fffc000 {
 		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
@@ -49,74 +61,79 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
 
-	soc {
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&tzic>;
 		ranges;
 
-		aips@50000000 { /* AIPS1 */
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@50004000 {
-					compatible = "fsl,imx50-esdhc";
+				esdhc1: mmc@50004000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@50008000 {
-					compatible = "fsl,imx50-esdhc";
+				esdhc2: mmc@50008000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -127,19 +144,19 @@
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@50010000 {
+				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -159,25 +176,25 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@50020000 {
-					compatible = "fsl,imx50-esdhc";
+				esdhc3: mmc@50020000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@50024000 {
-					compatible = "fsl,imx50-esdhc";
+				esdhc4: mmc@50024000 {
+					compatible = "fsl,imx50-esdhc", "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -188,7 +205,8 @@
 				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
 				interrupts = <18>;
-				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
+				fsl,usbphy = <&usbphy0>;
 				status = "disabled";
 			};
 
@@ -201,24 +219,6 @@
 				status = "disabled";
 			};
 
-			usbh2: usb@53f80400 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80400 0x0200>;
-				interrupts = <16>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
-			usbh3: usb@53f80600 {
-				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
-				reg = <0x53f80600 0x0200>;
-				interrupts = <17>;
-				clocks = <&clks IMX5_CLK_USBOH3_GATE>;
-				dr_mode = "host";
-				status = "disabled";
-			};
-
 			gpio1: gpio@53f84000 {
 				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
 				reg = <0x53f84000 0x4000>;
@@ -227,6 +227,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 151 28>;
 			};
 
 			gpio2: gpio@53f88000 {
@@ -237,6 +238,10 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0 75 8>, <&iomuxc 8 100 8>,
+					      <&iomuxc 16 83 1>, <&iomuxc 17 85 1>,
+					      <&iomuxc 18 87 1>, <&iomuxc 19 84 1>,
+					      <&iomuxc 20 88 1>, <&iomuxc 21 86 1>;
 			};
 
 			gpio3: gpio@53f8c000 {
@@ -247,6 +252,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 108 32>;
 			};
 
 			gpio4: gpio@53f90000 {
@@ -257,9 +263,11 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc  0   8  8>, <&iomuxc 8 45 12>,
+					      <&iomuxc 20 140 11>;
 			};
 
-			wdog1: wdog@53f98000 {
+			wdog1: watchdog@53f98000 {
 				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
@@ -271,7 +279,7 @@
 				reg = <0x53fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -280,27 +288,22 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@53fa8000 {
-				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
-				reg = <0x53fa8000 0xc>;
-			};
-
 			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
 
 			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -310,7 +313,7 @@
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -320,14 +323,15 @@
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
-			src: src@53fd0000 {
+			src: reset-controller@53fd0000 {
 				compatible = "fsl,imx50-src", "fsl,imx51-src";
 				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
 				#reset-cells = <1>;
 			};
 
@@ -346,6 +350,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 57 18>, <&iomuxc 18 89 11>;
 			};
 
 			gpio6: gpio@53fe0000 {
@@ -356,6 +361,7 @@
 				#gpio-cells = <2>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
+				gpio-ranges = <&iomuxc 0 27 18>, <&iomuxc 18 16 11>;
 			};
 
 			i2c3: i2c@53fec000 {
@@ -373,13 +379,13 @@
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 		};
 
-		aips@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -391,7 +397,7 @@
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -403,36 +409,37 @@
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@63fac000 {
+			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_AHB>;
 				clock-names = "ipg", "ahb";
+				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
 			};
 
-			cspi: cspi@63fc0000 {
+			cspi: spi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -482,8 +489,8 @@
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/imx51-apf51.dts b/arch/arm/boot/dts/imx51-apf51.dts
index e88b2a6be079..ba28ffe06fe2 100644
--- a/arch/arm/boot/dts/imx51-apf51.dts
+++ b/arch/arm/boot/dts/imx51-apf51.dts
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Armadeus Systems - <support@armadeus.com>
  * Copyright 2012 Laurent Cans <laurent.cans@gmail.com>
@@ -5,13 +6,6 @@
  * Based on mx51-babbage.dts
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -21,7 +15,8 @@
 	model = "Armadeus Systems APF51 module";
 	compatible = "armadeus,imx51-apf51", "fsl,imx51";
 
-	memory {
+	memory@90000000 {
+		device_type = "memory";
 		reg = <0x90000000 0x20000000>;
 	};
 
@@ -36,7 +31,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "mii";
-	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+	phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
 	phy-reset-duration = <1>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx51-apf51dev.dts b/arch/arm/boot/dts/imx51-apf51dev.dts
index 93d3ea12328c..b61d55ca1467 100644
--- a/arch/arm/boot/dts/imx51-apf51dev.dts
+++ b/arch/arm/boot/dts/imx51-apf51dev.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Armadeus Systems - <support@armadeus.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /* APF51Dev is a docking board for the APF51 SOM */
@@ -16,7 +10,7 @@
 	model = "Armadeus Systems APF51Dev docking/development board";
 	compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
 
-	backlight@bl1{
+	backlight {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_backlight>;
 		compatible = "gpio-backlight";
@@ -24,7 +18,7 @@
 		default-on;
 	};
 
-	display@di1 {
+	disp1 {
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "bgr666";
 		pinctrl-names = "default";
@@ -51,7 +45,7 @@
 
 		port {
 			display_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
+				remote-endpoint = <&ipu_di0_disp1>;
 			};
 		};
 	};
@@ -69,7 +63,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -80,16 +74,14 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 25 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &ecspi2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>,
 		   <&gpio3 27 GPIO_ACTIVE_LOW>;
 	status = "okay";
@@ -98,7 +90,7 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	status = "okay";
 };
@@ -122,7 +114,7 @@
 	pinctrl-0 = <&pinctrl_hog>;
 
 	imx51-apf51dev {
-		pinctrl_backlight: bl1grp {
+		pinctrl_backlight: backlightgrp {
 			fsl,pins = <
 				MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
 			>;
@@ -220,6 +212,6 @@
 	};
 };
 
-&ipu_di0_disp0 {
+&ipu_di0_disp1 {
 	remote-endpoint = <&display_in>;
 };
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 649befeb2cf9..a1f9c6a72275 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 /dts-v1/;
 #include "imx51.dtsi"
@@ -21,52 +14,74 @@
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@90000000 {
+		device_type = "memory";
 		reg = <0x90000000 0x20000000>;
 	};
 
-	clocks {
-		ckih1 {
-			clock-frequency = <22579200>;
-		};
+	ckih1 {
+		clock-frequency = <22579200>;
+	};
 
-		clk_26M: codec_clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <26000000>;
-			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
-		};
+	clk_osc: clk-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_osc_gate: clk-osc-gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_osc>;
+		clocks = <&clk_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_audio: clk-audio {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_audio>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_usb: clk-usb {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz_usb>;
+		clocks = <&clk_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 	};
 
-	display0: display@di0 {
+	display1: disp1 {
 		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
 		interface-pix-fmt = "rgb24";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp1>;
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: dvi {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
+
+		port@0 {
+		reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
 			};
 		};
 
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu_di0_disp0>;
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
 			};
 		};
 	};
 
-	display1: display@di1 {
+	display2: disp2 {
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
@@ -93,7 +108,43 @@
 
 		port {
 			display1_in: endpoint {
-				remote-endpoint = <&ipu_di1_disp1>;
+				remote-endpoint = <&ipu_di1_disp2>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
 			};
 		};
 	};
@@ -103,11 +154,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -154,18 +205,15 @@
 		mux-ext-port = <3>;
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_DUMMY>;
-			clock-names = "main_clk";
-			reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
-		};
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1reg>;
+		clocks = <&clk_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
 	};
 };
 
@@ -178,7 +226,6 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
 		   <&gpio4 25 GPIO_ACTIVE_LOW>;
 	status = "okay";
@@ -192,6 +239,7 @@
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
 		fsl,mc13xxx-uses-rtc;
 
 		regulators {
@@ -241,6 +289,10 @@
 				regulator-max-microvolt = <3150000>;
 			};
 
+			vusb_reg: vusb {
+				regulator-boot-on;
+			};
+
 			vusb2_reg: vusb2 {
 				regulator-min-microvolt = <2400000>;
 				regulator-max-microvolt = <2775000>;
@@ -338,22 +390,21 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_clkcodec>;
 		reg = <0x0a>;
-		clocks = <&clk_26M>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_audio>;
 		VDDA-supply = <&vdig_reg>;
 		VDDIO-supply = <&vvideo_reg>;
 	};
 };
 
-&ipu_di0_disp0 {
+&ipu_di0_disp1 {
 	remote-endpoint = <&display0_in>;
 };
 
-&ipu_di1_disp1 {
+&ipu_di1_disp2 {
 	remote-endpoint = <&display1_in>;
 };
 
@@ -381,6 +432,10 @@
 	status = "okay";
 };
 
+&pmu {
+	secure-reg-access;
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -388,7 +443,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -401,7 +456,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -409,11 +464,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
 	vbus-supply = <&reg_hub_reset>;
-	fsl,usbphy = <&usbh1phy>;
+	fsl,usbphy = <&usbphy1>;
 	phy_type = "ulpi";
 	status = "okay";
 };
 
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
 &usbotg {
 	dr_mode = "otg";
 	disable-over-current;
@@ -432,9 +491,21 @@
 			>;
 		};
 
-		pinctrl_clkcodec: clkcodecgrp {
+		pinctrl_clk26mhz_audio: clk26mhzaudiocgrp {
+			fsl,pins = <
+				MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_osc: clk26mhzoscgrp {
+			fsl,pins = <
+				MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+			>;
+		};
+
+		pinctrl_clk26mhz_usb: clk26mhzusbgrp {
 			fsl,pins = <
-				MX51_PAD_CSPI1_RDY__GPIO4_26		0x80000000
+				MX51_PAD_EIM_D17__GPIO2_1		0x85
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
index 1db517d3d497..10cae7c3a879 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx51-digi-connectcore-som.dtsi"
@@ -17,8 +11,19 @@
 		     "digi,connectcore-ccxmx51-som", "fsl,imx51";
 
 	chosen {
-		linux,stdout-path = &uart1;
+		stdout-path = &uart1;
 	};
+
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+};
+
+&esdhc1 {
+	status = "okay";
 };
 
 &owire {
@@ -27,6 +32,18 @@
 	status = "okay";
 };
 
+&pmic {
+	fsl,mc13xxx-uses-rtc;
+
+	regulators {
+		vcoincell_reg: vcoincell {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+	};
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -53,6 +70,7 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
+	fsl,usbphy = <&usbphy1>;
 	dr_mode = "host";
 	phy_type = "ulpi";
 	disable-over-current;
diff --git a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
index 321662f53e33..f0809a16a2ce 100644
--- a/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
+++ b/arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,7 +10,8 @@
 	model = "Digi ConnectCore CC(W)-MX51";
 	compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
 
-	memory {
+	memory@90000000 {
+		device_type = "memory";
 		reg = <0x90000000 0x08000000>;
 	};
 };
@@ -24,7 +19,6 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
@@ -37,26 +31,25 @@
 		reg = <0>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
-		fsl,mc13xxx-uses-rtc;
 
 		regulators {
 			sw1_reg: sw1 {
-				regulator-min-microvolt = <1000000>;
+				regulator-min-microvolt = <1050000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			sw2_reg: sw2 {
-				regulator-min-microvolt = <1225000>;
-				regulator-max-microvolt = <1225000>;
+				regulator-min-microvolt = <1175000>;
+				regulator-max-microvolt = <1275000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
 			sw3_reg: sw3 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1350000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
@@ -109,18 +102,6 @@
 				regulator-always-on;
 			};
 
-			vgen1_reg: vgen1 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-			};
-
-			vgen2_reg: vgen2 {
-				regulator-min-microvolt = <3150000>;
-				regulator-max-microvolt = <3150000>;
-				regulator-always-on;
-			};
-
 			vgen3_reg: vgen3 {
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -131,8 +112,6 @@
 				regulator-always-on;
 			};
 
-			gpo1_reg: gpo1 { };
-
 			gpo2_reg: gpo2 { };
 
 			gpo3_reg: gpo3 { };
@@ -142,21 +121,22 @@
 			pwgt2spi_reg: pwgt2spi {
 				regulator-always-on;
 			};
-
-			vcoincell_reg: vcoincell {
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
 		};
 	};
 };
 
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	max-frequency = <50000000>;
+	bus-width = <1>;
+};
+
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
 	cap-sdio-irq;
-	enable-sdio-wakeup;
+	wakeup-source;
 	keep-power-in-suspend;
 	max-frequency = <50000000>;
 	no-1-8-v;
@@ -174,9 +154,12 @@
 };
 
 &i2c2 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
 	clock-frequency = <400000>;
+	scl-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
 	mma7455l@1d {
@@ -201,6 +184,7 @@
 &usbotg {
 	phy_type = "utmi_wide";
 	disable-over-current;
+	vbus-supply = <&swbst_reg>;
 	/* Device role is not known, keep status disabled */
 };
 
@@ -209,7 +193,7 @@
 	pinctrl-0 = <&pinctrl_weim>;
 	status = "okay";
 
-	lan9221: lan9221@5,0 {
+	lan9221: ethernet@5,0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_lan9221>;
 		compatible = "smsc,lan9221", "smsc,lan9115";
@@ -241,6 +225,14 @@
 			>;
 		};
 
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX51_PAD_SD1_CLK__SD1_CLK		0x400021d5
+				MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+				MX51_PAD_SD1_DATA0__SD1_DATA0		0x400020d5
+			>;
+		};
+
 		pinctrl_esdhc2: esdhc2grp {
 			fsl,pins = <
 				MX51_PAD_SD2_CMD__SD2_CMD		0x400020d5
@@ -282,6 +274,13 @@
 			>;
 		};
 
+		pinctrl_i2c2_gpio: i2c2gpiogrp {
+			fsl,pins = <
+				MX51_PAD_GPIO1_2__GPIO1_2		0x400001ed
+				MX51_PAD_GPIO1_3__GPIO1_3		0x400001ed
+			>;
+		};
+
 		pinctrl_nfc: nfcgrp {
 			fsl,pins = <
 				MX51_PAD_NANDF_D0__NANDF_D0		0x80000000
diff --git a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
index 63164266af83..c2a929ba8ceb 100644
--- a/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
+++ b/arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
  */
 
 #include "imx51.dtsi"
@@ -22,7 +9,8 @@
 	model = "Eukrea CPUIMX51";
 	compatible = "eukrea,cpuimx51", "fsl,imx51";
 
-	memory {
+	memory@90000000 {
+		device_type = "memory";
 		reg = <0x90000000 0x10000000>; /* 256M */
 	};
 };
diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
index 34599c547459..b6d931e96a8f 100644
--- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
+++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
@@ -1,19 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
  */
 
 /dts-v1/;
@@ -41,7 +28,7 @@
 			label = "BP1";
 			gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 			linux,code = <256>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,input-type = <1>;
 		};
 	};
@@ -83,18 +70,12 @@
 		fsl,mux-ext-port = <3>;
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
-
-		usbh1phy: usbh1phy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-			clock-names = "main_clk";
-			clock-frequency = <19200000>;
-		};
+	usbphy1: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		clock-frequency = <19200000>;
+		#phy-cells = <0>;
 	};
 };
 
@@ -114,7 +95,6 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
@@ -261,21 +241,21 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
-	fsl,usbphy = <&usbh1phy>;
+	fsl,usbphy = <&usbphy1>;
 	dr_mode = "host";
 	phy_type = "ulpi";
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx51-pinfunc.h b/arch/arm/boot/dts/imx51-pinfunc.h
index 9eb92abaeb6d..910e0ec50ef3 100644
--- a/arch/arm/boot/dts/imx51-pinfunc.h
+++ b/arch/arm/boot/dts/imx51-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef __DTS_IMX51_PINFUNC_H
@@ -536,7 +532,6 @@
 #define MX51_PAD_DISPB2_SER_CLK__DISP1_PIN7		0x2c4 0x6c4 0x000 0x3 0x0
 #define MX51_PAD_DISPB2_SER_CLK__DISPB2_SER_CLK		0x2c4 0x6c4 0x000 0x0 0x0
 #define MX51_PAD_DISPB2_SER_CLK__GPIO3_7		0x2c4 0x6c4 0x990 0x4 0x1
-#define MX51_PAD_DISPB2_SER_RS__DISP1_EXT_CLK		0x2c8 0x6c8 0x000 0x2 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN16		0x2c8 0x6c8 0x000 0x2 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISP1_PIN8		0x2c8 0x6c8 0x000 0x3 0x0
 #define MX51_PAD_DISPB2_SER_RS__DISPB2_SER_RS		0x2c8 0x6c8 0x000 0x0 0x0
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
new file mode 100644
index 000000000000..f7408722d68a
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -0,0 +1,331 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * Licensed under the X11 license or the GPL v2 (or later)
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+	model = "Technologic Systems TS-4800";
+	compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0x10000000>;
+	};
+
+	clocks {
+		ckih1 {
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			clock-frequency = <24576000>;
+		};
+	};
+
+	backlight_reg: regulator-backlight {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_lcd>;
+		regulator-name = "enable_lcd_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 78770>;
+		brightness-levels = <0 150 200 255>;
+		default-brightness-level = <1>;
+		power-supply = <&backlight_reg>;
+	};
+
+	display1: disp1 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <30066000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <50>;
+				hback-porch = <70>;
+				hsync-len = <50>;
+				vback-porch = <0>;
+				vfront-porch = <0>;
+				vsync-len = <50>;
+			};
+		};
+
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	rtc: rtc@68 {
+		compatible = "st,m41t00";
+		reg = <0x68>;
+	};
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display0_in>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm_backlight>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim>;
+	status = "okay";
+
+	fpga@0 {
+		compatible = "simple-bus";
+		fsl,weim-cs-timing = <0x0061008F 0x00000002 0x1c022000
+				      0x00000000 0x1c092480 0x00000000>;
+		reg = <0 0x0000000 0x1d000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0 0 0x1d000>;
+
+		syscon: syscon@10000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x10000 0x3d>;
+			reg-io-width = <2>;
+
+			wdt {
+				compatible = "technologic,ts4800-wdt";
+				syscon = <&syscon 0xe>;
+			};
+		};
+
+		touchscreen@12000 {
+			compatible = "technologic,ts4800-ts";
+			reg = <0x12000 0x1000>;
+			syscon = <&syscon 0x10 6>;
+		};
+
+		fpga_irqc: fpga-irqc@15000 {
+			compatible = "technologic,ts4800-irqc";
+			reg = <0x15000 0x1000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_interrupt_fpga>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+		};
+
+		can@1a000 {
+			compatible = "technologic,sja1000";
+			reg = <0x1a000 0x100>;
+			interrupt-parent = <&fpga_irqc>;
+			interrupts = <1>;
+			reg-io-width = <2>;
+			nxp,tx-output-config = <0x06>;
+			nxp,external-clock-frequency = <24000000>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85 /* CS0 */
+		>;
+	};
+
+	pinctrl_enable_lcd: enablelcdgrp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D12__GPIO4_9		0x1c5
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_GPIO1_0__GPIO1_0		0x100
+			MX51_PAD_GPIO1_1__GPIO1_1		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x000001f5
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x00000085
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x00000085
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x00000085
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x00000180
+			MX51_PAD_EIM_CS5__FEC_CRS		0x00000180
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x00000180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x00000180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x00002180
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x00002004
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x00002004
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x00002004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x00002004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x00002004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x00002004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x00002004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x00002180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x000020a4
+			MX51_PAD_EIM_A20__GPIO2_14		0x00000085 /* Phy Reset */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_interrupt_fpga: fpgaicgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D27__GPIO2_9		0xe5
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+			MX51_PAD_DI_GP4__DI2_PIN15		0x5
+		>;
+	};
+
+	pinctrl_pwm_backlight: backlightgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__PWM1_PWMO		0x80000000
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_weim: weimgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_DTACK__EIM_DTACK		0x85
+			MX51_PAD_EIM_CS0__EIM_CS0		0x0
+			MX51_PAD_EIM_CS1__EIM_CS1		0x0
+			MX51_PAD_EIM_EB0__EIM_EB0		0x85
+			MX51_PAD_EIM_EB1__EIM_EB1		0x85
+			MX51_PAD_EIM_OE__EIM_OE			0x85
+			MX51_PAD_EIM_LBA__EIM_LBA		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-zii-rdu1.dts b/arch/arm/boot/dts/imx51-zii-rdu1.dts
new file mode 100644
index 000000000000..e537e06e11d7
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-rdu1.dts
@@ -0,0 +1,894 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "ZII RDU1 Board";
+	compatible = "zii,imx51-rdu1", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+		rtc0 = &ds1341;
+	};
+
+	clk_26M_osc: 26M_osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_26M_osc_gate: 26M_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_clk26mhz>;
+		clocks = <&clk_26M_osc>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	clk_26M_usb: usbhost_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	};
+
+	clk_26M_snd: snd_gate {
+		compatible = "gpio-gate-clock";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sndgate26mhz>;
+		clocks = <&clk_26M_osc_gate>;
+		#clock-cells = <0>;
+		enable-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_5p0v_main: regulator-5p0v-main {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_MAIN";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	disp0 {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		/* no compatible here, bootloader will patch in correct one */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel>;
+		power-supply = <&reg_3p3v>;
+		enable-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	i2c_gpio: i2c-gpio {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swi2c>;
+		gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>, /* sda */
+			<&gpio3 4 GPIO_ACTIVE_HIGH>; /* scl */
+		i2c-gpio,delay-us = <50>;
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgtl5000: codec@a {
+			compatible = "fsl,sgtl5000";
+			reg = <0x0a>;
+			clocks = <&clk_26M_snd>;
+			VDDA-supply = <&vdig_reg>;
+			VDDIO-supply = <&vvideo_reg>;
+			#sound-dai-cells = <0>;
+		};
+	};
+
+	spi_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiospi0>;
+		status = "okay";
+
+		gpio-sck = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		gpio-mosi = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		gpio-miso = <&gpio4 11 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+		cs-gpios = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+
+		eeprom@0 {
+			compatible = "eeprom-93xx46";
+			reg = <0>;
+			spi-max-frequency = <1000000>;
+			spi-cs-high;
+			data-size = <8>;
+		};
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio3 25 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "netaux";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "netright";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "netleft";
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "Front";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"Headphone Jack", "TPA6130A2 HPLEFT",
+			"Headphone Jack", "TPA6130A2 HPRIGHT";
+		simple-audio-card,aux-devs = <&hpa1>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			clocks = <&clk_26M_snd>;
+		};
+	};
+
+	usbh1phy: usbphy1 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+
+	usbh2phy: usbphy2 {
+		compatible = "usb-nop-xceiv";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2phy>;
+		clocks = <&clk_26M_usb>;
+		clock-names = "main_clk";
+		reset-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&vusb_reg>;
+		#phy-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled0@3 {
+				reg = <3>;
+				label = "system:green:status";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled1@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45db642d", "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-supply = <&vgen3_reg>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "hp-amp-shutdown-b", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	unused-sd3-wp-hog {
+		/*
+		 * See pinctrl_esdhc1 below for more details on this
+		 */
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_HIGH>;
+		output-high;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	hpa1: amp@60 {
+		compatible = "ti,tpa6130a2";
+		reg = <0x60>;
+		Vdd-supply = <&reg_3p3v>;
+		sound-name-prefix = "TPA6130A2";
+	};
+
+	ds1341: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+
+	/* touch nodes default disabled, bootloader will enable the right one */
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reg = <0x4b>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@4c {
+		compatible = "atmel,maxtouch";
+		reg = <0x4c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+	};
+
+	touchscreen@20 {
+		compatible = "syna,rmi4-i2c";
+		reg = <0x20>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		rmi4-f01@1 {
+			reg = <0x1>;
+			syna,nosleep-mode = <2>;
+		};
+
+		rmi4-f11@11 {
+			reg = <0x11>;
+			touchscreen-inverted-x;
+			touchscreen-swapped-x-y;
+			syna,sensor-type = <1>;
+		};
+	};
+
+};
+
+&ipu_di0_disp1 {
+	remote-endpoint = <&display_in>;
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-rdu1";
+		current-speed = <38400>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog";
+		};
+
+		backlight {
+			compatible = "zii,rave-sp-backlight";
+		};
+
+		pwrbutton {
+			compatible = "zii,rave-sp-pwrbutton";
+		};
+
+		eeprom@a3 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa3 0x2000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "dds-eeprom";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+
+		eeprom@ae {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xae 0x200>;
+			zii,eeprom-name = "switch-eeprom";
+			/*
+			 * Not all RDU1s have this functionality, so we
+			 * rely on the bootloader to enable this
+			 */
+			status = "disabled";
+		};
+	};
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh1phy>;
+	disable-over-current;
+	maximum-speed = "full-speed";
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	fsl,usbphy = <&usbh2phy>;
+	disable-over-current;
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb_reg>;
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&reg_5p0v_main>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_9__GPIO1_9		0x5e
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_TXD__AUD3_TXD		0xa5
+			MX51_PAD_AUD3_BB_RXD__AUD3_RXD		0x85
+			MX51_PAD_AUD3_BB_CK__AUD3_TXC		0xa5
+			MX51_PAD_AUD3_BB_FS__AUD3_TXFS		0x85
+		>;
+	};
+
+	pinctrl_clk26mhz: clk26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_PIN12__GPIO3_1		0x85
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			/*
+			 * GPIO1_1 is not directly used by eSDHC1 in
+			 * any capacity, but earlier versions of RDU1
+			 * used that pin as WP GPIO for eSDHC3 and
+			 * because of that that pad has an external
+			 * pull-up resistor. This is problematic
+			 * because out of reset the pad is configured
+			 * as ALT0 which serves as SD1_WP, which, when
+			 * pulled high by and external pull-up, will
+			 * inhibit execution of any write request to
+			 * attached eMMC device.
+			 *
+			 * To avoid this problem we configure the pad
+			 * to ALT1/GPIO and avoid driving SD1_WP
+			 * signal high.
+			 */
+			MX51_PAD_GPIO1_1__GPIO1_1		0x0000
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_EIM_EB2__FEC_MDIO		0x1f5
+			MX51_PAD_NANDF_D9__FEC_RDATA0		0x2180
+			MX51_PAD_EIM_EB3__FEC_RDATA1		0x180
+			MX51_PAD_EIM_CS2__FEC_RDATA2		0x180
+			MX51_PAD_EIM_CS3__FEC_RDATA3		0x180
+			MX51_PAD_EIM_CS4__FEC_RX_ER		0x180
+			MX51_PAD_NANDF_D11__FEC_RX_DV		0x2084
+			MX51_PAD_EIM_CS5__FEC_CRS		0x180
+			MX51_PAD_NANDF_RB2__FEC_COL		0x2180
+			MX51_PAD_NANDF_RB3__FEC_RX_CLK		0x2180
+			MX51_PAD_NANDF_CS2__FEC_TX_ER		0x2004
+			MX51_PAD_NANDF_CS3__FEC_MDC		0x2004
+			MX51_PAD_NANDF_D8__FEC_TDATA0		0x2180
+			MX51_PAD_NANDF_CS4__FEC_TDATA1		0x2004
+			MX51_PAD_NANDF_CS5__FEC_TDATA2		0x2004
+			MX51_PAD_NANDF_CS6__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_EIM_A20__GPIO2_14		0x85
+		>;
+	};
+
+	pinctrl_gpiospi0: gpiospi0grp {
+		fsl,pins = <
+			MX51_PAD_CSI2_D18__GPIO4_11		0x85
+			MX51_PAD_CSI2_D19__GPIO4_12		0x85
+			MX51_PAD_CSI2_HSYNC__GPIO4_14		0x85
+			MX51_PAD_CSI2_PIXCLK__GPIO4_15		0x85
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_ipu_disp1: ipudisp1grp {
+		fsl,pins = <
+			MX51_PAD_DISP1_DAT0__DISP1_DAT0		0x5
+			MX51_PAD_DISP1_DAT1__DISP1_DAT1		0x5
+			MX51_PAD_DISP1_DAT2__DISP1_DAT2		0x5
+			MX51_PAD_DISP1_DAT3__DISP1_DAT3		0x5
+			MX51_PAD_DISP1_DAT4__DISP1_DAT4		0x5
+			MX51_PAD_DISP1_DAT5__DISP1_DAT5		0x5
+			MX51_PAD_DISP1_DAT6__DISP1_DAT6		0x5
+			MX51_PAD_DISP1_DAT7__DISP1_DAT7		0x5
+			MX51_PAD_DISP1_DAT8__DISP1_DAT8		0x5
+			MX51_PAD_DISP1_DAT9__DISP1_DAT9		0x5
+			MX51_PAD_DISP1_DAT10__DISP1_DAT10	0x5
+			MX51_PAD_DISP1_DAT11__DISP1_DAT11	0x5
+			MX51_PAD_DISP1_DAT12__DISP1_DAT12	0x5
+			MX51_PAD_DISP1_DAT13__DISP1_DAT13	0x5
+			MX51_PAD_DISP1_DAT14__DISP1_DAT14	0x5
+			MX51_PAD_DISP1_DAT15__DISP1_DAT15	0x5
+			MX51_PAD_DISP1_DAT16__DISP1_DAT16	0x5
+			MX51_PAD_DISP1_DAT17__DISP1_DAT17	0x5
+			MX51_PAD_DISP1_DAT18__DISP1_DAT18	0x5
+			MX51_PAD_DISP1_DAT19__DISP1_DAT19	0x5
+			MX51_PAD_DISP1_DAT20__DISP1_DAT20	0x5
+			MX51_PAD_DISP1_DAT21__DISP1_DAT21	0x5
+			MX51_PAD_DISP1_DAT22__DISP1_DAT22	0x5
+			MX51_PAD_DISP1_DAT23__DISP1_DAT23	0x5
+			MX51_PAD_DI1_PIN2__DI1_PIN2		0x5
+			MX51_PAD_DI1_PIN3__DI1_PIN3		0x5
+			MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK	0x5
+		>;
+	};
+
+	pinctrl_panel: panelgrp {
+		fsl,pins = <
+			MX51_PAD_DI1_D0_CS__GPIO3_3		0x85
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x1e0
+			MX51_PAD_GPIO1_8__GPIO1_8		0x21e2
+		>;
+	};
+
+	pinctrl_sndgate26mhz: sndgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_RDY__GPIO4_26		0x85
+		>;
+	};
+
+	pinctrl_swi2c: swi2cgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_2__GPIO1_2		0xc5
+			MX51_PAD_DI1_D1_CS__GPIO3_4		0x400001f5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D14__GPIO3_26		0x21e6
+			MX51_PAD_NANDF_D15__GPIO3_25		0x21e6
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D8__GPIO3_12		0x04
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c4
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0xc5
+			MX51_PAD_UART2_TXD__UART2_TXD		0xc5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_EIM_D25__UART3_RXD		0x1c5
+			MX51_PAD_EIM_D26__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usbgate26mhz: usbgate26mhzgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT6__GPIO1_19		0x85
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX51_PAD_USBH1_STP__USBH1_STP		0x0
+			MX51_PAD_USBH1_CLK__USBH1_CLK		0x0
+			MX51_PAD_USBH1_DIR__USBH1_DIR		0x0
+			MX51_PAD_USBH1_NXT__USBH1_NXT		0x0
+			MX51_PAD_USBH1_DATA0__USBH1_DATA0	0x0
+			MX51_PAD_USBH1_DATA1__USBH1_DATA1	0x0
+			MX51_PAD_USBH1_DATA2__USBH1_DATA2	0x0
+			MX51_PAD_USBH1_DATA3__USBH1_DATA3	0x0
+			MX51_PAD_USBH1_DATA4__USBH1_DATA4	0x0
+			MX51_PAD_USBH1_DATA5__USBH1_DATA5	0x0
+			MX51_PAD_USBH1_DATA6__USBH1_DATA6	0x0
+			MX51_PAD_USBH1_DATA7__USBH1_DATA7	0x0
+		>;
+	};
+
+	pinctrl_usbh1phy: usbh1phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D0__GPIO4_8		0x85
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			MX51_PAD_EIM_A26__USBH2_STP		0x0
+			MX51_PAD_EIM_A24__USBH2_CLK		0x0
+			MX51_PAD_EIM_A25__USBH2_DIR		0x0
+			MX51_PAD_EIM_A27__USBH2_NXT		0x0
+			MX51_PAD_EIM_D16__USBH2_DATA0		0x0
+			MX51_PAD_EIM_D17__USBH2_DATA1		0x0
+			MX51_PAD_EIM_D18__USBH2_DATA2		0x0
+			MX51_PAD_EIM_D19__USBH2_DATA3		0x0
+			MX51_PAD_EIM_D20__USBH2_DATA4		0x0
+			MX51_PAD_EIM_D21__USBH2_DATA5		0x0
+			MX51_PAD_EIM_D22__USBH2_DATA6		0x0
+			MX51_PAD_EIM_D23__USBH2_DATA7		0x0
+		>;
+	};
+
+	pinctrl_usbh2phy: usbh2phygrp {
+		fsl,pins = <
+			MX51_PAD_NANDF_D1__GPIO4_7		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
new file mode 100644
index 000000000000..21dd3f7abd48
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-scu2-mezz.dts
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU2 Mezz Board";
+	compatible = "zii,imx51-scu2-mezz", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio_gpio;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio3 13 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	mdio_gpio: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_swmdio>;
+		gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 6 GPIO_ACTIVE_HIGH>; /* mdio */
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port5";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port6";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "port7";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "cpu";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "mezz2esb";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		compatible = "atmel,at45", "atmel,dataflash";
+		reg = <1>;
+		spi-max-frequency = <25000000>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+	phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <1>;
+	phy-supply = <&vgen3_reg>;
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			max-speed = <100>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-mezz";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+			MX51_PAD_DISP2_DAT1__FEC_RX_ER		0x20a4
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DI_GP3__FEC_TX_ER		0x2004
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+			MX51_PAD_EIM_A20__GPIO2_14		0x0085
+			MX51_PAD_EIM_A21__GPIO2_15		0x00e5
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_swmdio: swmdiogrp {
+		fsl,pins = <
+			MX51_PAD_EIM_D22__GPIO2_6		0x100
+			MX51_PAD_EIM_D23__GPIO2_7		0x100
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_CSI1_D9__GPIO3_13		0x85
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51-zii-scu3-esb.dts b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
new file mode 100644
index 000000000000..9f857eb44bf7
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-zii-scu3-esb.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+
+/*
+ * Copyright (C) 2018 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx51.dtsi"
+
+/ {
+	model = "ZII SCU3 ESB board";
+	compatible = "zii,imx51-scu3-esb", "fsl,imx51";
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	/* Will be filled by the bootloader */
+	memory@90000000 {
+		device_type = "memory";
+		reg = <0x90000000 0>;
+	};
+
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb_mmc_reset>;
+		gpio = <&gpio4 19 GPIO_ACTIVE_LOW>;
+		startup-delay-us = <150000>;
+	};
+};
+
+&cpu {
+	cpu-supply = <&sw1_reg>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "fsl,mc13892";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		spi-max-frequency = <6000000>;
+		spi-cs-high;
+		reg = <0>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		fsl,mc13xxx-uses-adc;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1375000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1850000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vpll_reg: vpll {
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vdig_reg: vdig {
+				regulator-min-microvolt = <1650000>;
+				regulator-max-microvolt = <1650000>;
+				regulator-boot-on;
+			};
+
+			vsd_reg: vsd {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3150000>;
+			};
+
+			vusb_reg: vusb {
+				regulator-always-on;
+			};
+
+			vusb2_reg: vusb2 {
+				regulator-min-microvolt = <2400000>;
+				regulator-max-microvolt = <2775000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vvideo_reg: vvideo {
+				regulator-min-microvolt = <2775000>;
+				regulator-max-microvolt = <2775000>;
+			};
+
+			vaudio_reg: vaudio {
+				regulator-min-microvolt = <2300000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vcam_reg: vcam {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3150000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+			};
+		};
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			led-control = <0x0 0x0 0x3f83f8 0x0>;
+
+			sysled3: led3@3 {
+				reg = <3>;
+				label = "system:red:power";
+				linux,default-trigger = "default-on";
+			};
+
+			sysled4: led4@4 {
+				reg = <4>;
+				label = "system:green:act";
+				linux,default-trigger = "heartbeat";
+			};
+		};
+	};
+
+	flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "atmel,at45", "atmel,dataflash";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&esdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-sdio;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "okay";
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			dsa,member = <0 0>;
+			eeprom-length = <512>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "port1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "port2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "port3";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "scu2scu";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "esb2host";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "esb2mezz";
+					phy-mode = "sgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					phy-mode = "mii";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&ipu {
+	status = "disabled";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	lm75@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+
+	mcu {
+		compatible = "zii,rave-sp-esb";
+		current-speed = <57600>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		watchdog {
+			compatible = "zii,rave-sp-watchdog-legacy";
+		};
+
+		eeprom@a4 {
+			compatible = "zii,rave-sp-eeprom";
+			reg = <0xa4 0x4000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			zii,eeprom-name = "main-eeprom";
+		};
+	};
+};
+
+&usbotg {
+	dr_mode = "host";
+	disable-over-current;
+	phy_type = "utmi_wide";
+	vbus-supply = <&usb_vbus>;
+	status = "okay";
+};
+
+&usbphy0 {
+	vcc-supply = <&vusb2_reg>;
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX51_PAD_CSPI1_MISO__ECSPI1_MISO	0x185
+			MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI	0x185
+			MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK	0x185
+			MX51_PAD_CSPI1_SS0__GPIO4_24		0x85
+			MX51_PAD_CSPI1_SS1__GPIO4_25		0x85
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX51_PAD_SD1_CMD__SD1_CMD		0x400020d5
+			MX51_PAD_SD1_CLK__SD1_CLK		0x20d5
+			MX51_PAD_SD1_DATA0__SD1_DATA0		0x20d5
+			MX51_PAD_SD1_DATA1__SD1_DATA1		0x20d5
+			MX51_PAD_SD1_DATA2__SD1_DATA2		0x20d5
+			MX51_PAD_SD1_DATA3__SD1_DATA3		0x20d5
+			MX51_PAD_SD2_DATA0__SD1_DAT4		0x20d5
+			MX51_PAD_SD2_DATA1__SD1_DAT5		0x20d5
+			MX51_PAD_SD2_DATA2__SD1_DAT6		0x20d5
+			MX51_PAD_SD2_DATA3__SD1_DAT7		0x20d5
+		>;
+	};
+
+	pinctrl_esdhc4: esdhc4grp {
+		fsl,pins = <
+			MX51_PAD_NANDF_RB1__SD4_CMD		0x400020d5
+			MX51_PAD_NANDF_CS2__SD4_CLK		0x20d5
+			MX51_PAD_NANDF_CS3__SD4_DAT0		0x20d5
+			MX51_PAD_NANDF_CS4__SD4_DAT1		0x20d5
+			MX51_PAD_NANDF_CS5__SD4_DAT2		0x20d5
+			MX51_PAD_NANDF_CS6__SD4_DAT3		0x20d5
+			MX51_PAD_NANDF_D0__GPIO4_8		0x100
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX51_PAD_DISP2_DAT15__FEC_TDATA0	0x2004
+			MX51_PAD_DISP2_DAT6__FEC_TDATA1		0x2004
+			MX51_PAD_DISP2_DAT7__FEC_TDATA2		0x2004
+			MX51_PAD_DISP2_DAT8__FEC_TDATA3		0x2004
+			MX51_PAD_DISP2_DAT9__FEC_TX_EN		0x2004
+			MX51_PAD_DISP2_DAT10__FEC_COL		0x0180
+			MX51_PAD_DISP2_DAT11__FEC_RX_CLK	0x0180
+			MX51_PAD_DISP2_DAT12__FEC_RX_DV		0x20a4
+
+			MX51_PAD_DISP2_DAT13__FEC_TX_CLK	0x2180
+			MX51_PAD_DISP2_DAT14__FEC_RDATA0	0x2180
+			MX51_PAD_DI2_DISP_CLK__FEC_RDATA1	0x0085
+			MX51_PAD_DI_GP4__FEC_RDATA2		0x0085
+			MX51_PAD_DISP2_DAT0__FEC_RDATA3		0x0085
+			MX51_PAD_DI2_PIN2__FEC_MDC		0x2004
+			MX51_PAD_DI2_PIN3__FEC_MDIO		0x01f5
+			MX51_PAD_DI2_PIN4__FEC_CRS		0x0180
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX51_PAD_KEY_COL4__I2C2_SCL		0x400001ed
+			MX51_PAD_KEY_COL5__I2C2_SDA		0x400001ed
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX51_PAD_GPIO1_4__GPIO1_4		0x85
+			MX51_PAD_GPIO1_8__GPIO1_8		0xe5
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_CK__GPIO4_20		0xc5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX51_PAD_UART1_RXD__UART1_RXD		0x1c5
+			MX51_PAD_UART1_TXD__UART1_TXD		0x1c5
+			MX51_PAD_UART1_RTS__UART1_RTS		0x1c5
+			MX51_PAD_UART1_CTS__UART1_CTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX51_PAD_UART2_RXD__UART2_RXD		0x1c5
+			MX51_PAD_UART2_TXD__UART2_TXD		0x1c5
+			MX51_PAD_USBH1_DATA0__UART2_CTS		0x1c5
+			MX51_PAD_USBH1_DATA3__UART2_RTS		0x1c5
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX51_PAD_UART3_RXD__UART3_RXD		0x1c5
+			MX51_PAD_UART3_TXD__UART3_TXD		0x1c5
+		>;
+	};
+
+	pinctrl_usb_mmc_reset: usbmmcgrp {
+		fsl,pins = <
+			MX51_PAD_AUD3_BB_RXD__GPIO4_19		0x100
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index f46fe9bf0bcb..ba92a3ea6872 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -1,16 +1,8 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
 #include "imx51-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -18,6 +10,15 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -46,29 +47,26 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
@@ -93,17 +91,22 @@
 		};
 	};
 
-	usbphy {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "simple-bus";
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
 
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
-			clock-names = "main_clk";
-		};
+	usbphy0: usbphy0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+	};
+
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
 	};
 
 	display-subsystem {
@@ -111,16 +114,29 @@
 		ports = <&ipu_di0>, <&ipu_di1>;
 	};
 
-	soc {
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
 		interrupt-parent = <&tzic>;
 		ranges;
 
-		iram: iram@1ffe0000 {
+		iram: sram@1ffe0000 {
 			compatible = "mmio-sram";
 			reg = <0x1ffe0000 0x20000>;
+			ranges = <0 0x1ffe0000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.1", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
 		};
 
 		ipu: ipu@40000000 {
@@ -130,58 +146,66 @@
 			reg = <0x40000000 0x20000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
-			         <&clks IMX5_CLK_IPU_DI0_GATE>,
-			         <&clks IMX5_CLK_IPU_DI1_GATE>;
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
+			ipu_csi0: port@0 {
+				reg = <0>;
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+			};
+
 			ipu_di0: port@2 {
 				reg = <2>;
 
-				ipu_di0_disp0: endpoint {
+				ipu_di0_disp1: endpoint {
 				};
 			};
 
 			ipu_di1: port@3 {
 				reg = <3>;
 
-				ipu_di1_disp1: endpoint {
+				ipu_di1_disp2: endpoint {
 				};
 			};
 		};
 
-		aips@70000000 { /* AIPS1 */
+		aips1: bus@70000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x70000000 0x10000000>;
 			ranges;
 
-			spba@70000000 {
+			spba-bus@70000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x70000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@70004000 {
+				esdhc1: mmc@70004000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@70008000 {
+				esdhc2: mmc@70008000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -192,19 +216,21 @@
 					reg = <0x7000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 43 5 1>, <&sdma 44 5 2>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@70010000 {
+				ecspi1: spi@70010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx51-ecspi";
 					reg = <0x70010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -224,31 +250,36 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@70020000 {
+				esdhc3: mmc@70020000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@70024000 {
+				esdhc4: mmc@70024000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
+			aipstz1: bridge@73f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x73f00000 0x60>;
+			};
+
 			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
@@ -344,14 +375,14 @@
 				status = "disabled";
 			};
 
-			wdog1: wdog@73f98000 {
+			wdog1: watchdog@73f98000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
 				clocks = <&clks IMX5_CLK_DUMMY>;
 			};
 
-			wdog2: wdog@73f9c000 {
+			wdog2: watchdog@73f9c000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f9c000 0x4000>;
 				interrupts = <59>;
@@ -364,7 +395,7 @@
 				reg = <0x73fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
@@ -374,21 +405,21 @@
 			};
 
 			pwm1: pwm@73fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
 
 			pwm2: pwm@73fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx51-pwm", "fsl,imx27-pwm";
 				reg = <0x73fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -398,8 +429,10 @@
 				reg = <0x73fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 1>, <&sdma 19 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -408,14 +441,17 @@
 				reg = <0x73fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 1>, <&sdma 17 4 2>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
-			src: src@73fd0000 {
+			src: reset-controller@73fd0000 {
 				compatible = "fsl,imx51-src";
 				reg = <0x73fd0000 0x4000>;
+				interrupts = <75>;
 				#reset-cells = <1>;
 			};
 
@@ -427,20 +463,30 @@
 			};
 		};
 
-		aips@80000000 {	/* AIPS2 */
+		aips2: bus@80000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
-			iim: iim@83f98000 {
-				compatible = "fsl,imx51-iim", "fsl,imx27-iim";
+			aipstz2: bridge@83f00000 {
+				compatible = "fsl,imx51-aipstz";
+				reg = <0x83f00000 0x60>;
+			};
+
+			iim: efuse@83f98000 {
+				compatible = "fsl,imx51-iim", "fsl,imx27-iim", "syscon";
 				reg = <0x83f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
 			};
 
+			tigerp: tigerp@83fa0000 {
+				compatible = "fsl,imx51-tigerp";
+				reg = <0x83fa0000 0x28>;
+			};
+
 			owire: owire@83fa4000 {
 				compatible = "fsl,imx51-owire", "fsl,imx21-owire";
 				reg = <0x83fa4000 0x4000>;
@@ -449,37 +495,37 @@
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@83fac000 {
+			ecspi2: spi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-ecspi";
 				reg = <0x83fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
-			sdma: sdma@83fb0000 {
+			sdma: dma-controller@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
-			cspi: cspi@83fc0000 {
+			cspi: spi@83fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -527,6 +573,11 @@
 				status = "disabled";
 			};
 
+			m4if: m4if@83fd8000 {
+				compatible = "fsl,imx51-m4if";
+				reg = <0x83fd8000 0x1000>;
+			};
+
 			weim: weim@83fda000 {
 				#address-cells = <2>;
 				#size-cells = <1>;
@@ -582,11 +633,31 @@
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
+
+			vpu: vpu@83ff4000 {
+				compatible = "fsl,imx51-vpu", "cnm,codahx4";
+				reg = <0x83ff4000 0x1000>;
+				interrupts = <9>;
+				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
+					 <&clks IMX5_CLK_VPU_GATE>;
+				clock-names = "per", "ahb";
+				resets = <&src 1>;
+				iram = <&iram>;
+			};
+
+			sahara: crypto@83ff8000 {
+				compatible = "fsl,imx53-sahara", "fsl,imx51-sahara";
+				reg = <0x83ff8000 0x4000>;
+				interrupts = <19 20>;
+				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+				clock-names = "ipg", "ahb";
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index e9337ad52f59..23a7492e2929 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -1,23 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "imx53.dtsi"
 
 / {
 	model = "Freescale i.MX53 Automotive Reference Design Board";
 	compatible = "fsl,imx53-ard", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
+		device_type = "memory";
 		reg = <0x70000000 0x40000000>;
 	};
 
@@ -28,7 +24,7 @@
 		reg = <0xf4000000 0x3ff0000>;
 		ranges;
 
-		lan9220@f4000000 {
+		ethernet@f4000000 {
 			compatible = "smsc,lan9220", "smsc,lan9115";
 			reg = <0xf4000000 0x2000000>;
 			phy-mode = "mii";
@@ -65,37 +61,37 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio5 10 0>;
-			linux,code = <102>; /* KEY_HOME */
-			gpio-key,wakeup;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio5 11 0>;
-			linux,code = <158>; /* KEY_BACK */
-			gpio-key,wakeup;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
 		};
 
-		program {
+		key-program {
 			label = "Program";
 			gpios = <&gpio5 12 0>;
-			linux,code = <362>; /* KEY_PROGRAM */
-			gpio-key,wakeup;
+			linux,code = <KEY_PROGRAM >;
+			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio5 13 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
+			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio4 0 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
 };
@@ -103,8 +99,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
new file mode 100644
index 000000000000..055d23a9aee7
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2017 Beckhoff Automation GmbH & Co. KG
+ * based on imx53-qsb.dts
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Beckhoff CX9020 Embedded PC";
+	compatible = "bhf,cx9020", "fsl,imx53";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	display-0 {
+		#address-cells =<1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+
+	dvi-connector {
+		compatible = "dvi-connector";
+		ddc-i2c-bus = <&i2c2>;
+		digital;
+
+		port {
+			dvi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	dvi-converter {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-pwr-r {
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-pwr-g {
+			gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		led-pwr-b {
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-sd1-b {
+			linux,default-trigger = "mmc0";
+			gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-sd2-b {
+			linux,default-trigger = "mmc1";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulator-3p2v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P2V";
+		regulator-min-microvolt = <3200000>;
+		regulator-max-microvolt = <3200000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&esdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ipu_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&vpu {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_CLKO               0x1c4
+			MX53_PAD_GPIO_16__I2C3_SDA              0x1c4
+			MX53_PAD_EIM_D22__GPIO3_22              0x1c4
+			MX53_PAD_EIM_D23__GPIO3_23              0x1e4
+			MX53_PAD_EIM_D24__GPIO3_24              0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_GPIO_1__ESDHC1_CD              0x1c4
+			MX53_PAD_EIM_D17__GPIO3_17              0x1e4
+			MX53_PAD_GPIO_3__GPIO1_3                0x1c4
+		>;
+	};
+
+	pinctrl_esdhc2: esdhc2grp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA0__ESDHC2_DAT0		0x1d5
+			MX53_PAD_SD2_DATA1__ESDHC2_DAT1		0x1d5
+			MX53_PAD_SD2_DATA2__ESDHC2_DAT2		0x1d5
+			MX53_PAD_SD2_DATA3__ESDHC2_DAT3		0x1d5
+			MX53_PAD_SD2_CMD__ESDHC2_CMD		0x1d5
+			MX53_PAD_SD2_CLK__ESDHC2_CLK		0x1d5
+			MX53_PAD_GPIO_4__ESDHC2_CD              0x1e4
+			MX53_PAD_EIM_D20__GPIO3_20              0x1e4
+			MX53_PAD_GPIO_8__GPIO1_8                0x1c4
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0xc0000000
+			MX53_PAD_KEY_COL3__I2C2_SCL             0xc0000000
+		>;
+	};
+
+	pinctrl_ipu_disp0: ipudisp0grp {
+		fsl,pins = <
+			MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK	0x5
+			MX53_PAD_DI0_PIN15__IPU_DI0_PIN15	0x5
+			MX53_PAD_DI0_PIN2__IPU_DI0_PIN2		0x5
+			MX53_PAD_DI0_PIN3__IPU_DI0_PIN3		0x5
+			MX53_PAD_DI0_PIN4__IPU_DI0_PIN4		0x5
+			MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0	0x5
+			MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1	0x5
+			MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2	0x5
+			MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3	0x5
+			MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4	0x5
+			MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5	0x5
+			MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6	0x5
+			MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7	0x5
+			MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8	0x5
+			MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9	0x5
+			MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10	0x5
+			MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11	0x5
+			MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12	0x5
+			MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13	0x5
+			MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14	0x5
+			MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15	0x5
+			MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16	0x5
+			MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17	0x5
+			MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18	0x5
+			MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19	0x5
+			MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20	0x5
+			MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21	0x5
+			MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22	0x5
+			MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23	0x5
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D26__UART2_RXD_MUX	0x1e4
+			MX53_PAD_EIM_D27__UART2_TXD_MUX 0x1e4
+			MX53_PAD_EIM_D28__UART2_RTS 0x1e4
+			MX53_PAD_EIM_D29__UART2_CTS 0x1e4
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-kp-ddc.dts b/arch/arm/boot/dts/imx53-kp-ddc.dts
new file mode 100644
index 000000000000..0e7f071fd10e
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-ddc.dts
@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 DDC";
+	compatible = "kiebackpeter,imx53-ddc", "fsl,imx53";
+
+	backlight_lcd: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		power-supply = <&reg_backlight>;
+		brightness-levels = <0 24 28 32 36
+				     40 44 48 52 56
+				     60 64 68 72 76
+				     80 84 88 92 96 100>;
+		default-brightness-level = <20>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp>;
+
+		port@0 {
+			reg = <0>;
+
+			display1_in: endpoint {
+				remote-endpoint = <&ipu_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "koe,tx14d24vm1bpa";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-supply";
+		regulator-min-microvolt = <15000000>;
+		regulator-max-microvolt = <15000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	status = "okay";
+};
+
+&i2c3 {
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <2>;
+			ti,datarate = <4>;
+		};
+	};
+
+	gpio-expander2@21 {
+		compatible = "nxp,pcf8574";
+		reg = <0x21>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	imx53-kp-ddc {
+		pinctrl_disp: dispgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK      0x4
+				MX53_PAD_EIM_DA10__IPU_DI1_PIN15        0x4
+				MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0       0x4
+				MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1       0x4
+				MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2       0x4
+				MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3       0x4
+				MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4       0x4
+				MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5       0x4
+				MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6       0x4
+				MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7       0x4
+				MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8       0x4
+				MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9       0x4
+				MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10      0x4
+				MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11      0x4
+				MX53_PAD_EIM_A17__IPU_DISP1_DAT_12      0x4
+				MX53_PAD_EIM_A18__IPU_DISP1_DAT_13      0x4
+				MX53_PAD_EIM_A19__IPU_DISP1_DAT_14      0x4
+				MX53_PAD_EIM_A20__IPU_DISP1_DAT_15      0x4
+				MX53_PAD_EIM_A21__IPU_DISP1_DAT_16      0x4
+				MX53_PAD_EIM_A22__IPU_DISP1_DAT_17      0x4
+				MX53_PAD_EIM_A23__IPU_DISP1_DAT_18      0x4
+				MX53_PAD_EIM_A24__IPU_DISP1_DAT_19      0x4
+				MX53_PAD_EIM_D31__IPU_DISP1_DAT_20      0x4
+				MX53_PAD_EIM_D30__IPU_DISP1_DAT_21      0x4
+				MX53_PAD_EIM_D26__IPU_DISP1_DAT_22      0x4
+				MX53_PAD_EIM_D27__IPU_DISP1_DAT_23      0x4
+				MX53_PAD_GPIO_1__PWM2_PWMO 0x4
+			>;
+		};
+	};
+};
+
+&ipu_di1_disp1 {
+	remote-endpoint = <&display1_in>;
+};
+
+&pmic {
+	fsl,mc13xxx-uses-touch;
+};
diff --git a/arch/arm/boot/dts/imx53-kp-hsc.dts b/arch/arm/boot/dts/imx53-kp-hsc.dts
new file mode 100644
index 000000000000..6e3d71baac0f
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp-hsc.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-kp.dtsi"
+
+/ {
+	model = "K+P imx53 HSC";
+	compatible = "kiebackpeter,imx53-hsc", "fsl,imx53";
+};
+
+&fec {
+	status = "okay";
+
+	fixed-link { /* RMII fixed link to LAN9303 */
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	switch: switch@a {
+		compatible = "smsc,lan9303-i2c";
+		reg = <0xa>;
+		reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
+		reset-duration = <400>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 { /* RMII fixed link to master */
+				reg = <0>;
+				label = "cpu";
+				ethernet = <&fec>;
+			};
+
+			port@1 { /* external port 1 */
+				reg = <1>;
+				label = "lan1";
+			};
+
+			port@2 { /* external port 2 */
+				reg = <2>;
+				label = "lan2";
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-kp.dtsi b/arch/arm/boot/dts/imx53-kp.dtsi
new file mode 100644
index 000000000000..4508f34139a0
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-kp.dtsi
@@ -0,0 +1,197 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	buzzer {
+		compatible = "pwm-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_buzzer>;
+		pwms = <&pwm1 0 500000>;
+	};
+
+	gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button-kalt {
+			label = "Kaltstart";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+		};
+
+		button-pwr {
+			label = "PowerFailInterrupt";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-bus {
+			label = "bus";
+			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-error {
+			label = "error";
+			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-flash {
+			label = "flash";
+			gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+
+	gpio-expander1@22 {
+		compatible = "nxp,pcf8574";
+		reg = <0x22>;
+		interrupts = <109>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kp_common>;
+
+	imx53-kp-common {
+		pinctrl_buzzer: buzzergrp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA3__PWM1_PWMO 0x1e4
+			>;
+		};
+
+		pinctrl_gpiobuttons: gpiobuttonsgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_RW__GPIO2_26 0x1e4
+				MX53_PAD_EIM_D22__GPIO3_22 0x1e4
+			>;
+		};
+
+		pinctrl_kp_common: kpcommongrp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__GPIO2_23 0x1e4
+				MX53_PAD_GPIO_19__GPIO4_5  0x1e4
+				MX53_PAD_PATA_DATA6__GPIO2_6 0x1e4
+				MX53_PAD_PATA_DATA7__GPIO2_7 0xe0
+				MX53_PAD_CSI0_DAT14__GPIO6_0 0x1e4
+				MX53_PAD_CSI0_DAT16__GPIO6_2 0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4 0x1e4
+				MX53_PAD_EIM_D17__GPIO3_17 0x1e4
+				MX53_PAD_EIM_D18__GPIO3_18 0x1e4
+				MX53_PAD_EIM_D21__GPIO3_21 0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29 0x1e4
+				MX53_PAD_EIM_DA11__GPIO3_11 0x1e4
+				MX53_PAD_EIM_DA13__GPIO3_13 0x1e4
+				MX53_PAD_EIM_DA14__GPIO3_14 0x1e4
+				MX53_PAD_SD1_DATA0__GPIO1_16 0x1e4
+				MX53_PAD_SD1_CMD__GPIO1_18 0x1e4
+				MX53_PAD_SD1_CLK__GPIO1_20 0x1e4
+			>;
+		};
+
+		pinctrl_leds: ledgrp {
+			fsl,pins = <
+				MX53_PAD_EIM_EB2__GPIO2_30 0x1d4
+				MX53_PAD_EIM_D28__GPIO3_28 0x1d4
+				MX53_PAD_EIM_WAIT__GPIO5_0 0x1d4
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__UART4_TXD_MUX 0x1e4
+				MX53_PAD_CSI0_DAT13__UART4_RXD_MUX 0x1e4
+			>;
+		};
+	};
+};
+
+&pinctrl_uart1 {
+	fsl,pins = <
+		MX53_PAD_EIM_D23__GPIO3_23 0x1e4
+		MX53_PAD_EIM_EB3__GPIO2_31 0x1e4
+		MX53_PAD_EIM_D24__GPIO3_24 0x1e4
+		MX53_PAD_EIM_D25__GPIO3_25 0x1e4
+		MX53_PAD_EIM_D19__GPIO3_19 0x1e4
+		MX53_PAD_EIM_D20__GPIO3_20 0x1e4
+	>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy0 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi
index 87a7fc709c2d..fe5e0d308e99 100644
--- a/arch/arm/boot/dts/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/imx53-m53.dtsi
@@ -1,21 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx53.dtsi"
 
 / {
-	model = "DENX M53";
-	compatible = "denx,imx53-m53", "fsl,imx53";
+	model = "Aries/DENX M53";
+	compatible = "aries,imx53-m53", "denx,imx53-m53", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
+		device_type = "memory";
 		reg = <0x70000000 0x20000000>,
 		      <0xb0000000 0x20000000>;
 	};
@@ -51,10 +46,8 @@
 	clock-frequency = <400000>;
 	status = "okay";
 
-	stmpe610@41 {
+	touchscreen@41 {
 		compatible = "st,stmpe610";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		reg = <0x41>;
 		id = <0>;
 		blocks = <0x5>;
@@ -64,7 +57,6 @@
 
 		stmpe_touchscreen {
 			compatible = "st,stmpe-ts";
-			reg = <0>;
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
 			st,ref-sel = <0>;
@@ -84,7 +76,7 @@
 	};
 
 	rtc: rtc@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index d0e0f57eb432..2bd2432d317f 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -1,22 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
 #include "imx53-m53.dtsi"
 
 / {
-	model = "DENX M53EVK";
-	compatible = "denx,imx53-m53evk", "fsl,imx53";
+	model = "Aries/DENX M53EVK";
+	compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
 
-	display1: display@di1 {
+	display1: disp1 {
 		compatible = "fsl,imx-parallel-display";
 		interface-pix-fmt = "bgr666";
 		pinctrl-names = "default";
@@ -58,13 +52,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_gpio>;
 
-		user1 {
+		led-user1 {
 			label = "user1";
 			gpios = <&gpio2 8 0>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		user2 {
+		led-user2 {
 			label = "user2";
 			gpios = <&gpio2 9 0>;
 			linux,default-trigger = "heartbeat";
@@ -84,6 +78,15 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 2 0>;
 		};
+
+		reg_usb_otg_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 4 0>;
+		};
 	};
 
 	sound {
@@ -124,8 +127,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio1 1 0>;
-	wp-gpios = <&gpio1 9 0>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -141,9 +144,10 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
 		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
@@ -168,7 +172,13 @@
 			>;
 		};
 
-		led_pin_gpio: led_gpio@0 {
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_4__GPIO1_4		0x000b0
+			>;
+		};
+
+		led_pin_gpio: led_gpio {
 			fsl,pins = <
 				MX53_PAD_PATA_DATA8__GPIO2_8		0x80000000
 				MX53_PAD_PATA_DATA9__GPIO2_9		0x80000000
@@ -311,6 +321,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -351,6 +362,10 @@
 };
 
 &usbotg {
-	dr_mode = "peripheral";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
new file mode 100644
index 000000000000..4d77b6077fc1
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -0,0 +1,517 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ */
+
+/dts-v1/;
+#include "imx53-m53.dtsi"
+
+/ {
+	model = "MENLO M53 EMBEDDED DEVICE";
+	compatible = "menlo,m53menlo", "fsl,imx53";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_power_button>;
+		pinctrl-names = "default";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pinctrl_power_out>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user1 {
+			label = "TestLed601";
+			gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+
+		led-user2 {
+			label = "TestLed602";
+			gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-eth {
+			label = "EthLedYe";
+			gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "netdev";
+		};
+	};
+
+	lvds-decoder {
+		compatible = "ti,ds90cf364a", "lvds-decoder";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_decoder_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_decoder_out: endpoint {
+					remote-endpoint = <&panel_in>;
+				};
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0dh6";
+		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds_decoder_out>;
+			};
+		};
+	};
+
+	beeper {
+		compatible = "gpio-beeper";
+		pinctrl-0 = <&pinctrl_beeper>;
+		gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 2 0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX5_CLK_CKO1_SEL>,
+			  <&clks IMX5_CLK_CKO1_PODF>,
+			  <&clks IMX5_CLK_CKO1>;
+	assigned-clock-parents = <&clks IMX5_CLK_AHB>;
+	assigned-clock-rates = <133333334>, <33333334>, <33333334>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev@0 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <0>;
+	};
+
+	spidev@1 {
+		compatible = "menlo,m53cpld";
+		spi-max-frequency = <25000000>;
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"TestPin_SV2_3", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"CPLD_JTAG_TDI", "CPLD_JTAG_TMS", "", "",
+		"", "CPLD_JTAG_TDO", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "CPLD_JTAG_TCK", "KBD_intK",
+		"CPLD_int", "CPLD_JTAG_internal", "CPLD_D[0]", "CPLD_D[1]",
+		"CPLD_D[2]", "CPLD_D[3]", "CPLD_D[4]", "CPLD_D[5]",
+		"CPLD_D[6]", "CPLD_D[7]", "DISP_reset", "KBD_intI";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "",
+		"CPLD_reset", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "USB-OTG_OverCurrent", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "",
+		"", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
+		wake-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	dac@60 {
+		compatible = "microchip,mcp4725";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	touchscreen@41 {
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	imx53-m53evk {
+		hoggrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_19__CCM_CLKO		0x1e4
+				MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x1e4
+				MX53_PAD_CSI0_DAT4__GPIO5_22		0x1e4
+				MX53_PAD_CSI0_DAT5__GPIO5_23		0x1c4
+				MX53_PAD_CSI0_DAT6__GPIO5_24		0x1e4
+				MX53_PAD_CSI0_DAT7__GPIO5_25		0x1e4
+				MX53_PAD_CSI0_DAT8__GPIO5_26		0x1e4
+				MX53_PAD_CSI0_DAT9__GPIO5_27		0x1c4
+				MX53_PAD_CSI0_DAT10__GPIO5_28		0x1e4
+				MX53_PAD_CSI0_DAT11__GPIO5_29		0x1e4
+				MX53_PAD_PATA_DATA11__GPIO2_11		0x1e4
+				MX53_PAD_EIM_D24__GPIO3_24		0x1e4
+				MX53_PAD_EIM_D25__GPIO3_25		0x1e4
+				MX53_PAD_EIM_D29__GPIO3_29		0x1e4
+				MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x1e4
+				MX53_PAD_CSI0_VSYNC__GPIO5_21		0x1e4
+				MX53_PAD_CSI0_DAT18__GPIO6_4		0x1c4
+				MX53_PAD_PATA_DATA8__GPIO2_8		0x1e4
+			>;
+		};
+
+		pinctrl_led: ledgrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT15__GPIO6_1		0x1c4
+				MX53_PAD_CSI0_DAT16__GPIO6_2		0x1c4
+			>;
+		};
+
+		pinctrl_beeper: beepergrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT17__GPIO6_3		0x1c4
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_7__CAN1_TXCAN		0x1c4
+				MX53_PAD_GPIO_8__CAN1_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX53_PAD_KEY_COL4__CAN2_TXCAN		0x1e4
+				MX53_PAD_KEY_ROW4__CAN2_RXCAN		0x1c4
+			>;
+		};
+
+		pinctrl_display_gpio: display-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__GPIO5_30		0x1c4 /* Reset */
+				MX53_PAD_CSI0_MCLK__GPIO5_19		0x1e4 /* Int-K */
+				MX53_PAD_CSI0_DAT13__GPIO5_31		0x1c4 /* Int-I */
+
+				MX53_PAD_CSI0_DAT14__GPIO6_0		0x1c4 /* Power down */
+			>;
+		};
+
+		pinctrl_edt_ft5x06: edt-ft5x06grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DATA9__GPIO2_9		0x1e4 /* Reset */
+				MX53_PAD_CSI0_DAT19__GPIO6_5		0x1c4 /* Interrupt */
+				MX53_PAD_PATA_DATA10__GPIO2_10		0x1e4 /* Wake */
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX53_PAD_EIM_CS0__ECSPI2_SCLK		0xe4
+				MX53_PAD_EIM_OE__ECSPI2_MISO		0xe4
+				MX53_PAD_EIM_CS1__ECSPI2_MOSI		0xe4
+				MX53_PAD_EIM_RW__GPIO2_26		0xe4
+				MX53_PAD_EIM_LBA__GPIO2_27		0xe4
+			>;
+		};
+
+		pinctrl_esdhc1: esdhc1grp {
+			fsl,pins = <
+				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1e4
+				MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1e4
+				MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1e4
+				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1e4
+				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1e4
+				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1e4
+				MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+				MX53_PAD_GPIO_9__GPIO1_9		0x1e4
+			>;
+		};
+
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+				MX53_PAD_PATA_DA_1__GPIO7_7		0x1e4
+				MX53_PAD_EIM_EB3__GPIO2_31		0x1e4
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+				MX53_PAD_GPIO_5__I2C3_SCL		0x400001e4
+			>;
+		};
+
+		pinctrl_lvds0: lvds0grp {
+			/* LVDS pins only have pin mux configuration */
+			fsl,pins = <
+				MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK	0x80000000
+				MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0	0x80000000
+				MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1	0x80000000
+				MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2	0x80000000
+				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3	0x80000000
+			>;
+		};
+
+		pinctrl_power_button: powerbutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+			>;
+		};
+
+		pinctrl_power_out: poweroutgrp {
+			fsl,pins = <
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+				MX53_PAD_PATA_IORDY__UART1_RTS		0x1e4
+				MX53_PAD_PATA_RESET_B__UART1_CTS	0x1e4
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+				MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DIOR__UART2_RTS		0x1e4
+				MX53_PAD_PATA_INTRQ__UART2_CTS		0x1e4
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+				MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+				MX53_PAD_PATA_DA_2__UART3_RTS		0x1e4
+			>;
+		};
+
+		pinctrl_usb: usbgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_2__GPIO1_2		0x1c4
+				MX53_PAD_GPIO_3__USBOH3_USBH1_OC	0x1c4
+				MX53_PAD_GPIO_4__GPIO1_4		0x1c4
+				MX53_PAD_GPIO_18__GPIO7_13		0x1c4
+			>;
+		};
+	};
+};
+
+&ldb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lvds0>;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		reg = <0>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@2 {
+			reg = <2>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_decoder_in>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb>;
+	vbus-supply = <&reg_usbh1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts
index 2e44d2aba14e..09eee0dd44c1 100644
--- a/arch/arm/boot/dts/imx53-mba53.dts
+++ b/arch/arm/boot/dts/imx53-mba53.dts
@@ -1,13 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -30,7 +24,7 @@
 		power-supply = <&reg_backlight>;
 	};
 
-	disp1: display@disp1 {
+	disp1: disp1 {
 		compatible = "fsl,imx-parallel-display";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_disp1_1>;
@@ -195,7 +189,7 @@
 };
 
 &fec {
-	phy-reset-gpios = <&gpio7 6 0>;
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-pinfunc.h b/arch/arm/boot/dts/imx53-pinfunc.h
index aec406bc65eb..67bd06610fdf 100644
--- a/arch/arm/boot/dts/imx53-pinfunc.h
+++ b/arch/arm/boot/dts/imx53-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef __DTS_IMX53_PINFUNC_H
@@ -524,6 +520,7 @@
 #define MX53_PAD_EIM_D25__UART1_DSR				0x140 0x488 0x000 0x7 0x0
 #define MX53_PAD_EIM_D26__EMI_WEIM_D_26				0x144 0x48c 0x000 0x0 0x0
 #define MX53_PAD_EIM_D26__GPIO3_26				0x144 0x48c 0x000 0x1 0x0
+#define MX53_PAD_EIM_D26__UART2_RXD_MUX				0x144 0x48c 0x880 0x2 0x0
 #define MX53_PAD_EIM_D26__UART2_TXD_MUX				0x144 0x48c 0x000 0x2 0x0
 #define MX53_PAD_EIM_D26__FIRI_RXD				0x144 0x48c 0x80c 0x3 0x0
 #define MX53_PAD_EIM_D26__IPU_CSI0_D_1				0x144 0x48c 0x000 0x4 0x0
@@ -533,6 +530,7 @@
 #define MX53_PAD_EIM_D27__EMI_WEIM_D_27				0x148 0x490 0x000 0x0 0x0
 #define MX53_PAD_EIM_D27__GPIO3_27				0x148 0x490 0x000 0x1 0x0
 #define MX53_PAD_EIM_D27__UART2_RXD_MUX				0x148 0x490 0x880 0x2 0x1
+#define MX53_PAD_EIM_D27__UART2_TXD_MUX				0x148 0x490 0x000 0x2 0x0
 #define MX53_PAD_EIM_D27__FIRI_TXD				0x148 0x490 0x000 0x3 0x0
 #define MX53_PAD_EIM_D27__IPU_CSI0_D_0				0x148 0x490 0x000 0x4 0x0
 #define MX53_PAD_EIM_D27__IPU_DI1_PIN13				0x148 0x490 0x000 0x5 0x0
@@ -541,6 +539,7 @@
 #define MX53_PAD_EIM_D28__EMI_WEIM_D_28				0x14c 0x494 0x000 0x0 0x0
 #define MX53_PAD_EIM_D28__GPIO3_28				0x14c 0x494 0x000 0x1 0x0
 #define MX53_PAD_EIM_D28__UART2_CTS				0x14c 0x494 0x000 0x2 0x0
+#define MX53_PAD_EIM_D28__UART2_RTS				0x14c 0x494 0x87c 0x2 0x0
 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO			0x14c 0x494 0x82c 0x3 0x1
 #define MX53_PAD_EIM_D28__CSPI_MOSI				0x14c 0x494 0x788 0x4 0x1
 #define MX53_PAD_EIM_D28__I2C1_SDA				0x14c 0x494 0x818 0x5 0x1
@@ -548,6 +547,7 @@
 #define MX53_PAD_EIM_D28__IPU_DI0_PIN13				0x14c 0x494 0x000 0x7 0x0
 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29				0x150 0x498 0x000 0x0 0x0
 #define MX53_PAD_EIM_D29__GPIO3_29				0x150 0x498 0x000 0x1 0x0
+#define MX53_PAD_EIM_D29__UART2_CTS				0x150 0x498 0x000 0x2 0x0
 #define MX53_PAD_EIM_D29__UART2_RTS				0x150 0x498 0x87c 0x2 0x1
 #define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS			0x150 0x498 0x000 0x3 0x0
 #define MX53_PAD_EIM_D29__CSPI_SS0				0x150 0x498 0x78c 0x4 0x2
diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
new file mode 100644
index 000000000000..70c4a4852256
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -0,0 +1,1122 @@
+/*
+ * Copyright 2014 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "General Electric CS ONE";
+	compatible = "ge,imx53-cpuvo", "fsl,imx53";
+
+	aliases {
+		spi0 = &cspi;
+		spi1 = &ecspi1;
+		spi2 = &ecspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
+	};
+
+	cko2_11M: sgtl-clock-cko2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <11289600>;
+	};
+
+	achc_24M: achc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	sgtlsound: sound {
+		compatible = "fsl,imx53-cpuvo-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx53-cpuvo-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <6>;
+	};
+
+	reg_sgtl5k: regulator-sgtl5k {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-sgtl5k";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usb_otg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh2_vbus: regulator-usbh2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh2_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbh3_vbus: regulator-usbh3-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh3_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh3_vbus>;
+		gpio = <&gpio5 27 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_tsiref: regulator-tsiref {
+		compatible = "regulator-fixed";
+		regulator-name = "tsiref";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		/* TPS54320 */
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_lcd: regulator-3v3-lcd {
+		/* MIC2009 */
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_3V3";
+		vin-supply = <&reg_3v3>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	pwm_bl: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 2 5 7 10 12 15 17 20 22 25 28 30 33 35
+				     38 40 43 45 48 51 53 56 58 61 63 66 68 71
+				     73 76 79 81 84 86 89 91 94 96 99 102 104
+				     107 109 112 114 117 119 122 124 127 130
+				     132 135 137 140 142 145 147 150 153 155
+				     158 160 163 165 168 170 173 175 178 181
+				     183 186 188 191 193 196 198 201 204 206
+				     209 211 214 216 219 221 224 226 229 232
+				     234 237 239 242 244 247 249 252 255>;
+		default-brightness-level = <0>;
+		enable-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3_lcd>;
+	};
+
+	led-controller-1 {
+		compatible = "pwm-leds";
+
+		led-1 {
+			label = "alarm-brightness";
+			pwms = <&pwm1 0 100000>;
+			max-brightness = <255>;
+		};
+	};
+
+	led-controller-2 {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_alarmled_pins>;
+
+		led-2 {
+			label = "alarm:red";
+			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			label = "alarm:yellow";
+			gpios = <&gpio7 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "alarm:blue";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			label = "alarm:silenced";
+			gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio3 8 GPIO_ACTIVE_HIGH>;
+		active-delay = <100>;
+		inactive-delay = <10>;
+		wait-delay = <100>;
+	};
+
+	power-gpio-keys {
+		compatible = "gpio-keys";
+
+		power-button {
+			label = "Power button";
+			gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	touch-lock-key {
+		compatible = "gpio-keys";
+
+		touch-lock-button {
+			label = "Touch lock button";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_F12>;
+		};
+	};
+
+	usbphy2: usbphy-2 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio4 4 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	usbphy3: usbphy-3 {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&reg_3v3>;
+		reset-gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
+		clock-names = "main_clk";
+
+		clock-frequency = <24000000>;
+		clocks = <&clks IMX5_CLK_CKO2>;
+		assigned-clocks = <&clks IMX5_CLK_CKO2_SEL>, <&clks IMX5_CLK_OSC>;
+		assigned-clock-parents = <&clks IMX5_CLK_OSC>;
+	};
+
+	panel-lvds0 {
+		compatible = "nvd,9128";
+		power-supply = <&reg_3v3_lcd>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&usbphy0 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&usbphy1 {
+	vcc-supply = <&reg_3v3>;
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 17 GPIO_ACTIVE_LOW
+		    &gpio4 10 GPIO_ACTIVE_LOW
+		    &gpio4 11 GPIO_ACTIVE_LOW
+		    &gpio4 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	spidev0: spi@1 {
+		compatible = "ge,achc", "nxp,kinetis-k20";
+		reg = <1>, <0>;
+		vdd-supply = <&reg_3v3>;
+		vdda-supply = <&reg_3v3>;
+		clocks = <&achc_24M>;
+		reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	};
+
+	gpioxra0: gpio@2 {
+		compatible = "exar,xra1403";
+		reg = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+
+	gpioxra1: gpio@3 {
+		compatible = "exar,xra1403";
+		reg = <3>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		spi-max-frequency = <1000000>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	da9053@0 {
+		compatible = "dlg,da9053-aa";
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <1000000>;
+		dlg,tsi-as-adc;
+		tsiref-supply = <&reg_tsiref>;
+
+		regulators {
+			buck1_reg: buck1 {
+				regulator-name = "BUCKCORE";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck2_reg: buck2 {
+				regulator-name = "BUCKPRO";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <2075000>;
+				regulator-always-on;
+			};
+
+			buck3_reg: buck3 {
+				regulator-name = "BUCKMEM";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			buck4_reg: buck4 {
+				regulator-name = "BUCKPERI";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-name = "ldo1_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-name = "ldo2_1v3";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-name = "ldo3_3v3";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-name = "ldo4_2v775";
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			ldo5_reg: ldo5 {
+				regulator-name = "ldo5_3v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo6_reg: ldo6 {
+				regulator-name = "ldo6_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo7_reg: ldo7 {
+				regulator-name = "ldo7_2v75";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo8_reg: ldo8 {
+				regulator-name = "ldo8_1v8";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-name = "ldo9_1v5";
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-always-on;
+			};
+
+			ldo10_reg: ldo10 {
+				regulator-name = "ldo10_1v3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+};
+
+&esdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc3>;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-supply = <&reg_3v3>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio2 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		reset-gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
+
+		i2c4: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0xa>;
+				#sound-dai-cells = <0>;
+				VDDA-supply = <&reg_sgtl5k>;
+				VDDIO-supply = <&reg_sgtl5k>;
+				clocks = <&cko2_11M>;
+				status = "okay";
+			};
+		};
+
+		i2c5: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			rtc@30 {
+			       compatible = "sii,s35390a";
+			       reg = <0x30>;
+			};
+
+			temp@48 {
+				compatible = "ti,tmp112";
+				reg = <0x48>;
+			};
+
+			mma8453q: accelerometer@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <6 IRQ_TYPE_NONE>;
+				interrupt-names = "INT1";
+			};
+
+			mpl3115: pressure-sensor@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+		};
+
+		i2c6: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c7: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		i2c8: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		i2c9: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		i2c10: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		i2c11: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	touchscreen@4b {
+		compatible = "atmel,maxtouch";
+		reset-gpio = <&gpio5 19 GPIO_ACTIVE_LOW>;
+		reg = <0x4b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@2 {
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,dma-info = <24 20>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	fsl,dma-info = <4096 4>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "otg";
+	phy_type = "utmi";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-0 = <&pinctrl_usb_otg>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	fsl,usbphy = <&usbphy2>;
+	vbus-supply = <&reg_usbh2_vbus>;
+	status = "okay";
+};
+
+&usbh3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh3>;
+	phy_type = "ulpi";
+	dr_mode = "host";
+	vbus-supply = <&reg_usbh3_vbus>;
+	fsl,usbphy = <&usbphy3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_rev6>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT19__AUDMUX_AUD5_RXD	0x400
+			MX53_PAD_DISP0_DAT17__AUDMUX_AUD5_TXD	0x400
+			MX53_PAD_DISP0_DAT16__AUDMUX_AUD5_TXC	0x400
+			MX53_PAD_DISP0_DAT18__AUDMUX_AUD5_TXFS	0x400
+			MX53_PAD_DI0_PIN15__AUDMUX_AUD6_TXC	0x400
+			MX53_PAD_DI0_PIN3__AUDMUX_AUD6_TXFS	0x400
+			MX53_PAD_DI0_PIN4__AUDMUX_AUD6_RXD	0x400
+			MX53_PAD_DI0_PIN2__AUDMUX_AUD6_TXD	0x400
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT21__ECSPI1_MOSI	0x400
+			MX53_PAD_DISP0_DAT22__ECSPI1_MISO	0x400
+			MX53_PAD_DISP0_DAT20__ECSPI1_SCLK	0x400
+			/* ECSPI1_SS0, must treat as GPIO for EzPort */
+			MX53_PAD_DISP0_DAT23__GPIO5_17		0x400
+			MX53_PAD_KEY_COL2__GPIO4_10		0x0
+			MX53_PAD_KEY_ROW2__GPIO4_11		0x0
+			MX53_PAD_KEY_COL3__GPIO4_12		0x0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_CS1__ECSPI2_MOSI		0x0
+			MX53_PAD_EIM_OE__ECSPI2_MISO		0x0
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x0
+			MX53_PAD_EIM_RW__GPIO2_26		0x0
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_esdhc3: esdhc3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DATA8__ESDHC3_DAT0	0x1d5
+			MX53_PAD_PATA_DATA9__ESDHC3_DAT1	0x1d5
+			MX53_PAD_PATA_DATA10__ESDHC3_DAT2	0x1d5
+			MX53_PAD_PATA_DATA11__ESDHC3_DAT3	0x1d5
+			MX53_PAD_PATA_DATA0__ESDHC3_DAT4	0x1d5
+			MX53_PAD_PATA_DATA1__ESDHC3_DAT5	0x1d5
+			MX53_PAD_PATA_DATA2__ESDHC3_DAT6	0x1d5
+			MX53_PAD_PATA_DATA3__ESDHC3_DAT7	0x1d5
+			MX53_PAD_PATA_RESET_B__ESDHC3_CMD	0x1d5
+			MX53_PAD_PATA_IORDY__ESDHC3_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x0
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x0
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x0
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x0
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x0
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x0
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x0
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x0
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x0
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x0
+		>;
+	};
+
+	pinctrl_hog_rev6: hoggrp {
+		fsl,pins = <
+			/* CKO2 */
+			MX53_PAD_GPIO_3__CCM_CLKO2		0x4
+			/* DEFIB_SYNC_MARKER_IN_IRQ */
+			MX53_PAD_GPIO_5__GPIO1_5		0x0
+			/* ACCELEROMETER_DATA_RDY_N */
+			MX53_PAD_GPIO_6__GPIO1_6		0x0
+			/* TEMPERATURE_ALERT_N */
+			MX53_PAD_GPIO_7__GPIO1_7		0x0
+			/* BAROMETRIC_PRESSURE_DATA_RDY_N */
+			MX53_PAD_GPIO_8__GPIO1_8		0x0
+			/* DOCKING_I2C_INTERFACE_IRQ_N */
+			MX53_PAD_PATA_DATA4__GPIO2_4		0x0
+			/* PWR_OUT_TO_DOCK_FAULT_N */
+			MX53_PAD_PATA_DATA5__GPIO2_5		0x0
+			/* ENABLE_PWR_TO_DOCK_N */
+			MX53_PAD_PATA_DATA6__GPIO2_6		0x0
+			/* HOST_CONTROLLED_RESET_TO_DOCKING_CONNECTOR_N */
+			MX53_PAD_PATA_DATA7__GPIO2_7		0x0
+			/* REMOTE_ON_REQUEST_FROM_DOCKING_CONNECTOR_IS_ACTIVE_N */
+			MX53_PAD_PATA_DATA12__GPIO2_12		0x0
+			/* DOCK_PRESENT_N */
+			MX53_PAD_PATA_DATA13__GPIO2_13		0x0
+			/* ECG_MARKER_IN_FROM_DOCKING_CONNECTOR_IRQ */
+			MX53_PAD_PATA_DATA14__GPIO2_14		0x0
+			/* ENABLE_ECG_MARKER_INTERFACE_TO_DOCKING_CONNECTOR */
+			MX53_PAD_PATA_DATA15__GPIO2_15		0x0
+			/* RESET_IMX535_ETHERNET_PHY_N */
+			MX53_PAD_EIM_A22__GPIO2_16		0x0
+			/* ENABLE_PWR_TO_LCD_AND_UI_INTERFACE */
+			MX53_PAD_EIM_A21__GPIO2_17		0x0
+			/* RESET_I2C1_BUS_SEGMENT_MUX_N */
+			MX53_PAD_EIM_A20__GPIO2_18		0x0
+			/* RESET_IMX535_USB_HOST3_PHY_N */
+			MX53_PAD_EIM_A19__GPIO2_19		0x0
+			/* ESDHC3_EMMC_NAND_RST_N */
+			MX53_PAD_EIM_A18__GPIO2_20		0x0
+			/* LCD_AND_UI_INTERFACE_PWR_FAULT_N */
+			MX53_PAD_EIM_A17__GPIO2_21		0x0
+			/* POWER_DOWN_LVDS0_DESERIALIZER_N */
+			MX53_PAD_EIM_A16__GPIO2_22		0x0
+			/* POWER_DOWN_LVDS1_DESERIALIZER_N */
+			MX53_PAD_EIM_LBA__GPIO2_27		0x0
+			/* RESET_DP0_TRANSMITTER_N */
+			MX53_PAD_EIM_EB0__GPIO2_28		0x0
+			/* RESET_DP1_TRANSMITTER_N */
+			MX53_PAD_EIM_EB1__GPIO2_29		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP0 */
+			MX53_PAD_EIM_DA0__GPIO3_0		0x0
+			/* ENABLE_SPDIF_AUDIO_TO_DP1 */
+			MX53_PAD_EIM_DA1__GPIO3_1		0x0
+			/* LVDS1_MUX_CTRL */
+			MX53_PAD_EIM_DA2__GPIO3_2		0x0
+			/* LVDS0_MUX_CTRL */
+			MX53_PAD_EIM_DA3__GPIO3_3		0x0
+			/* DP1_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA4__GPIO3_4		0x0
+			/* DP0_TRANSMITTER_IRQ */
+			MX53_PAD_EIM_DA5__GPIO3_5		0x0
+			/* USB_RESET_N */
+			MX53_PAD_EIM_DA6__GPIO3_6		0x0
+			/* ENABLE_BATTERY_CHARGER */
+			MX53_PAD_EIM_DA7__GPIO3_7		0x0
+			/* SOFTWARE_CONTROLLED_PWR_CYCLE */
+			MX53_PAD_EIM_DA8__GPIO3_8		0x0
+			/* SOFTWARE_CONTROLLED_POWERDOWN */
+			MX53_PAD_EIM_DA9__GPIO3_9		0x0
+			/* DC_PWR_IN_OK */
+			MX53_PAD_EIM_DA10__GPIO3_10		0x0
+			/* BATT_PRESENT_N */
+			MX53_PAD_EIM_DA11__GPIO3_11		0xe4
+			/* PMIC_IRQ_N */
+			MX53_PAD_EIM_DA12__GPIO3_12		0x0
+			/* PMIC_VDD_FAULT_STATUS_N */
+			MX53_PAD_EIM_DA13__GPIO3_13		0x0
+			/* IMX535_ETHERNET_PHY_STATUS_IRQ_N */
+			MX53_PAD_EIM_DA14__GPIO3_14		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_DA15__GPIO3_15		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D22__GPIO3_22		0x0
+			/* NOT USED - AVAILABLE 3.3V GPIO */
+			MX53_PAD_EIM_D24__GPIO3_24		0x0
+			/* NBP_PUMP_VALVE_PWR_ENABLE */
+			MX53_PAD_EIM_D25__GPIO3_25		0x0
+			/* NIBP_RESET_N */
+			MX53_PAD_EIM_D26__GPIO3_26		0x0
+			/* LATCHED_OVERPRESSURE_N */
+			MX53_PAD_EIM_D27__GPIO3_27		0x0
+			/* NBP_SBWTCLK */
+			MX53_PAD_EIM_D29__GPIO3_29		0x0
+			/* ENABLE_WIFI_MODULE */
+			MX53_PAD_GPIO_11__GPIO4_1		0x400
+			/* WIFI_MODULE_IRQ_N */
+			MX53_PAD_GPIO_12__GPIO4_2		0x400
+			/* ENABLE_BLUETOOTH_MODULE */
+			MX53_PAD_GPIO_13__GPIO4_3		0x400
+			/* RESET_IMX535_USB_HOST2_PHY_N */
+			MX53_PAD_GPIO_14__GPIO4_4		0x400
+			/* ONKEY_IS_DEPRESSED */
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x0
+			/* UNUSED_GPIO_TO_ALARM_LIGHT_BOARD */
+			MX53_PAD_EIM_WAIT__GPIO5_0		0x0
+			/* DISPLAY_LOCK_BUTTON_IS_DEPRESSED_N */
+			MX53_PAD_EIM_A25__GPIO5_2		0x0
+			/* I2C_PCAP_TOUCHSCREEN_IRQ_N */
+			MX53_PAD_EIM_A24__GPIO5_4		0x0
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT13__GPIO5_7		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT14__GPIO5_8		0x400
+			/* NOT USED - AVAILABLE 1.8V GPIO */
+			MX53_PAD_DISP0_DAT15__GPIO5_9		0x400
+			/* HOST_CONTROLLED_RESET_TO_LCD_N */
+			MX53_PAD_CSI0_PIXCLK__GPIO5_18		0x0
+			/* HOST_CONTROLLED_RESET_TO_PCAP_N */
+			MX53_PAD_CSI0_MCLK__GPIO5_19		0x0
+			/* LR_SCAN_CTRL */
+			MX53_PAD_CSI0_DATA_EN__GPIO5_20		0x0
+			/* UD_SCAN_CTRL */
+			MX53_PAD_CSI0_VSYNC__GPIO5_21		0x0
+			/* DATA_WIDTH_CTRL */
+			MX53_PAD_CSI0_DAT10__GPIO5_28		0x0
+			/* BACKLIGHT_ENABLE */
+			MX53_PAD_CSI0_DAT11__GPIO5_29		0x0
+			/* MED_USB_PORT_1_HOST_SELECT */
+			MX53_PAD_EIM_A23__GPIO6_6		0x0
+			/* MED_USB_PORT_2_HOST_SELECT */
+			MX53_PAD_NANDF_CLE__GPIO6_7		0x0
+			/* MED_USB_PORT_3_HOST_SELECT */
+			MX53_PAD_NANDF_ALE__GPIO6_8		0x0
+			/* MED_USB_PORT_4_HOST_SELECT */
+			MX53_PAD_NANDF_WP_B__GPIO6_9		0x0
+			/* MED_USB_PORT_5_HOST_SELECT */
+			MX53_PAD_NANDF_RB0__GPIO6_10		0x0
+			/* MED_USB_PORT_6_HOST_SELECT */
+			MX53_PAD_NANDF_CS0__GPIO6_11		0x0
+			/* MED_USB_PORT_7_HOST_SELECT */
+			MX53_PAD_NANDF_WE_B__GPIO6_12		0x0
+			/* MED_USB_PORT_8_HOST_SELECT */
+			MX53_PAD_NANDF_RE_B__GPIO6_13		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_0 */
+			MX53_PAD_NANDF_CS1__GPIO6_14		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_1 */
+			MX53_PAD_NANDF_CS2__GPIO6_15		0x0
+			/* MED_USB_PORT_TO_IMX_SELECT_2 */
+			MX53_PAD_NANDF_CS3__GPIO6_16		0x0
+			/* POWER_AND_BOOT_STATUS_INDICATOR */
+			MX53_PAD_PATA_INTRQ__GPIO7_2		0x1e4
+			/* RUNNING_ON_BATTERY_INDICATOR_GREEN */
+			MX53_PAD_GPIO_16__GPIO7_11		0x0
+			/* BATTERY_STATUS_INDICATOR_AMBER */
+			MX53_PAD_GPIO_17__GPIO7_12		0x0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D28__GPIO3_28		0x1e4
+			MX53_PAD_EIM_D21__GPIO3_21		0x1e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+			MX53_PAD_EIM_D16__I2C2_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__GPIO3_16		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D17__I2C3_SCL		0x400001e4
+			MX53_PAD_EIM_D18__I2C3_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX53_PAD_EIM_D18__GPIO3_18		0x1e4
+			MX53_PAD_EIM_D17__GPIO3_17		0x1e4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT9__PWM2_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DMARQ__UART2_TXD_MUX	0x1e4
+			MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_PATA_CS_0__UART3_TXD_MUX	0x1e4
+			MX53_PAD_PATA_CS_1__UART3_RXD_MUX	0x1e4
+			MX53_PAD_EIM_D23__UART3_CTS		0x1e4
+			MX53_PAD_EIM_EB3__UART3_RTS		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL1__UART5_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW1__UART5_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_usb_otg_vbus: usb-otg-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_OTG_VBUS_ENABLE */
+			MX53_PAD_KEY_ROW4__GPIO4_15		0x1c4
+		>;
+	};
+
+	pinctrl_usbh2: usbh2grp {
+		fsl,pins = <
+			/* USB H2 */
+			MX53_PAD_DISP0_DAT0__USBOH3_USBH2_DATA_0 0x180
+			MX53_PAD_DISP0_DAT1__USBOH3_USBH2_DATA_1 0x180
+			MX53_PAD_DISP0_DAT2__USBOH3_USBH2_DATA_2 0x180
+			MX53_PAD_DISP0_DAT3__USBOH3_USBH2_DATA_3 0x180
+			MX53_PAD_DISP0_DAT4__USBOH3_USBH2_DATA_4 0x180
+			MX53_PAD_DISP0_DAT5__USBOH3_USBH2_DATA_5 0x180
+			MX53_PAD_DISP0_DAT6__USBOH3_USBH2_DATA_6 0x180
+			MX53_PAD_DISP0_DAT7__USBOH3_USBH2_DATA_7 0x180
+			MX53_PAD_DISP0_DAT10__USBOH3_USBH2_STP	 0x180
+			MX53_PAD_DISP0_DAT11__USBOH3_USBH2_NXT	 0x180
+			MX53_PAD_DISP0_DAT12__USBOH3_USBH2_CLK	 0x180
+			MX53_PAD_DI0_DISP_CLK__USBOH3_USBH2_DIR	 0x5
+			MX53_PAD_EIM_D30__USBOH3_USBH2_OC	 0x180
+		>;
+	};
+
+	pinctrl_usbh2_vbus: usbh2-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST2_VBUS_ENABLE */
+			MX53_PAD_EIM_D31__GPIO3_31		0x0
+		>;
+	};
+
+	pinctrl_usbh3_vbus: usbh3-vbusgrp {
+		fsl,pins = <
+			/* USB_HS_HOST3_VBUS_ENABLE */
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0x0
+		>;
+	};
+
+	pinctrl_usbh3: usbh3grp {
+		fsl,pins = <
+			/* USB H3 */
+			MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 0x180
+			MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 0x180
+			MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 0x180
+			MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 0x180
+			MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 0x180
+			MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 0x180
+			MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 0x180
+			MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 0x180
+			MX53_PAD_CSI0_DAT7__USBOH3_USBH3_DIR	 0x5
+			MX53_PAD_CSI0_DAT6__USBOH3_USBH3_CLK	 0x180
+			MX53_PAD_CSI0_DAT5__USBOH3_USBH3_NXT	 0x180
+			MX53_PAD_CSI0_DAT4__USBOH3_USBH3_STP	 0x180
+			MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC	 0x180
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			/* USB_OTG_FAULT_N */
+			MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC	0x180
+		>;
+	};
+
+	pinctrl_alarmled_pins: qmx6alarmledgrp {
+		fsl,pins = <
+			/* ACTIVATE_ALARM_LIGHT_RED */
+			MX53_PAD_PATA_DIOR__GPIO7_3		0x0
+			/* ACTIVATE_ALARM_LIGHT_YELLOW */
+			MX53_PAD_PATA_DA_1__GPIO7_7		0x0
+			/* ACTIVATE_ALARM_LIGHT_CYAN */
+			MX53_PAD_PATA_DA_2__GPIO7_8		0x0
+			/* AUDIO_ALARMS_SILENCED_INDICATOR */
+			MX53_PAD_GPIO_18__GPIO7_13		0x0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
index 181ae5ebf23f..50fef8dd3675 100644
--- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
+++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 #include "imx53.dtsi"
 
@@ -17,64 +10,59 @@
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@70000000 {
+		device_type = "memory";
 		reg = <0x70000000 0x20000000>,
 		      <0xb0000000 0x20000000>;
 	};
 
-	display0: display@di0 {
+	display0: disp0 {
 		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb565";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ipu_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
 		status = "disabled";
-		display-timings {
-			claawvga {
-				native-mode;
-				clock-frequency = <27000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <40>;
-				hfront-porch = <60>;
-				vback-porch = <10>;
-				vfront-porch = <10>;
-				hsync-len = <20>;
-				vsync-len = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
 
-		port {
+		port@0 {
+			reg = <0>;
+
 			display0_in: endpoint {
 				remote-endpoint = <&ipu_di0_disp0>;
 			};
 		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power Button";
-			gpios = <&gpio1 8 0>;
-			linux,code = <116>; /* KEY_POWER */
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
-			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
-			gpio-key,wakeup;
+			gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
-			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
-			gpio-key,wakeup;
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
 		};
 	};
 
@@ -83,13 +71,23 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&led_pin_gpio7_7>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio7 7 0>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
+	panel {
+		compatible = "sii,43wvf1g";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -130,9 +128,21 @@
 	};
 };
 
+&cpu0 {
+	/* CPU rated to 1GHz, not 1.2GHz as per the default settings */
+	operating-points = <
+		/* kHz   uV */
+		166666  850000
+		400000  900000
+		800000  1050000
+		1000000 1200000
+	>;
+};
+
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -147,8 +157,8 @@
 &esdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc3>;
-	cd-gpios = <&gpio3 11 0>;
-	wp-gpios = <&gpio3 12 0>;
+	cd-gpios = <&gpio3 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 	bus-width = <8>;
 	status = "okay";
 };
@@ -160,7 +170,6 @@
 	imx53-qsb {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
 				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
 				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
 				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
@@ -172,7 +181,7 @@
 			>;
 		};
 
-		led_pin_gpio7_7: led_gpio7_7@0 {
+		led_pin_gpio7_7: led_gpio7_7 {
 			fsl,pins = <
 				MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
 			>;
@@ -187,6 +196,12 @@
 			>;
 		};
 
+		pinctrl_codec: codecgrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+			>;
+		};
+
 		pinctrl_esdhc1: esdhc1grp {
 			fsl,pins = <
 				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
@@ -195,6 +210,7 @@
 				MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
 				MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
 				MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+				MX53_PAD_EIM_DA13__GPIO3_13		0xe4
 			>;
 		};
 
@@ -215,23 +231,24 @@
 
 		pinctrl_fec: fecgrp {
 			fsl,pins = <
-				MX53_PAD_FEC_MDC__FEC_MDC		0x80000000
-				MX53_PAD_FEC_MDIO__FEC_MDIO		0x80000000
-				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x80000000
-				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x80000000
-				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x80000000
-				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x80000000
-				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x80000000
-				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x80000000
-				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x80000000
-				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x80000000
+				MX53_PAD_FEC_MDC__FEC_MDC		0x4
+				MX53_PAD_FEC_MDIO__FEC_MDIO		0x1fc
+				MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x180
+				MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x180
+				MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x180
+				MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x180
+				MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x180
+				MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x4
+				MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x4
+				MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x4
 			>;
 		};
 
+		/* open drain */
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA		0xc0000000
-				MX53_PAD_CSI0_DAT9__I2C1_SCL		0xc0000000
+				MX53_PAD_CSI0_DAT8__I2C1_SDA		0x400001ec
+				MX53_PAD_CSI0_DAT9__I2C1_SCL		0x400001ec
 			>;
 		};
 
@@ -295,9 +312,10 @@
 &tve {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_vga_sync>;
+	ddc-i2c-bus = <&i2c2>;
 	fsl,tve-mode = "vga";
-	fsl,hsync-pin = <4>;
-	fsl,vsync-pin = <6>;
+	fsl,hsync-pin = <7>;	/* IPU DI1 PIN7 via EIM_OE */
+	fsl,vsync-pin = <8>;	/* IPU DI1 PIN8 via EIM_RW */
 	status = "okay";
 };
 
@@ -312,9 +330,12 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p2v>;
 		VDDIO-supply = <&reg_3p2v>;
 		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
@@ -342,7 +363,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 0>;
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index dec4b073ceb1..6831836bd726 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 /dts-v1/;
 #include "imx53-qsb-common.dtsi"
@@ -23,7 +16,7 @@
 		compatible = "dlg,da9053-aa", "dlg,da9052";
 		reg = <0x48>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
 
 		regulators {
 			buck1_reg: buck1 {
@@ -64,8 +57,8 @@
 			};
 
 			ldo3_reg: ldo3 {
-				regulator-min-microvolt = <600000>;
-				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1725000>;
+				regulator-max-microvolt = <3300000>;
 				regulator-always-on;
 			};
 
@@ -76,8 +69,8 @@
 			};
 
 			ldo5_reg: ldo5 {
-				regulator-min-microvolt = <1725000>;
-				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
@@ -88,9 +81,8 @@
 			};
 
 			ldo7_reg: ldo7 {
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-always-on;
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
 			};
 
 			ldo8_reg: ldo8 {
@@ -100,16 +92,20 @@
 			};
 
 			ldo9_reg: ldo9 {
-				regulator-min-microvolt = <1200000>;
+				regulator-min-microvolt = <1250000>;
 				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 
 			ldo10_reg: ldo10 {
-				regulator-min-microvolt = <1250000>;
-				regulator-max-microvolt = <3650000>;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
 				regulator-always-on;
 			};
 		};
 	};
 };
+
+&tve {
+	dac-supply = <&ldo7_reg>;
+};
diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts
index 82d623d05915..1bbf24ad308a 100644
--- a/arch/arm/boot/dts/imx53-qsrb.dts
+++ b/arch/arm/boot/dts/imx53-qsrb.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 /dts-v1/;
 
@@ -20,35 +13,23 @@
 };
 
 &iomuxc {
-	i2c1 {
-		/* open drain */
-		pinctrl_i2c1_qsrb: i2c1grp-1 {
-			fsl,pins = <
-				MX53_PAD_CSI0_DAT8__I2C1_SDA      0x400001ec
-				MX53_PAD_CSI0_DAT9__I2C1_SCL      0x400001ec
-			>;
-		};
-
+	imx53-qsrb {
 		pinctrl_pmic: pmicgrp {
 			fsl,pins = <
-				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1e4 /* IRQ */
+				MX53_PAD_CSI0_DAT5__GPIO5_23	0x1c4 /* IRQ */
 			>;
 		};
 	};
 };
 
 &i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c1_qsrb>;
-	status = "okay";
-
 	pmic: mc34708@8 {
 		compatible = "fsl,mc34708";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
-		interrupts = <23 0x8>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
 		regulators {
 			sw1_reg: sw1a {
 				regulator-name = "SW1";
@@ -140,10 +121,8 @@
 
 			vdac_reg: vdac {
 				regulator-name = "VDAC";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2775000>;
-				regulator-boot-on;
-				regulator-always-on;
+				regulator-min-microvolt = <2750000>;
+				regulator-max-microvolt = <2750000>;
 			};
 
 			vgen1_reg: vgen1 {
@@ -164,3 +143,7 @@
 		};
 	};
 };
+
+&tve {
+	dac-supply = <&vdac_reg>;
+};
diff --git a/arch/arm/boot/dts/imx53-sk-imx53.dts b/arch/arm/boot/dts/imx53-sk-imx53.dts
new file mode 100644
index 000000000000..103e73176e47
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-sk-imx53.dts
@@ -0,0 +1,357 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2023 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx53.dtsi"
+
+/ {
+	model = "StarterKit SK-iMX53 Board";
+	compatible = "starterkit,sk-imx53", "fsl,imx53";
+
+	aliases {
+		/*
+		 * iMX RTC is not battery powered on this board.
+		 * Use the i2c RTC as rtc0.
+		 */
+		rtc0 = &rtc;
+		rtc1 = &srtc;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		/* v2 had only 256 MB, v3 has 512 MB */
+		reg = <0x70000000 0x20000000>;
+	};
+
+	reg_usb1_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&esdhc1 {
+	cd-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rmii";
+	phy-handle = <&phy0>;
+	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	tlv320aic23: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1338";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX53_PAD_SD2_DATA3__AUDMUX_AUD4_TXC	0x1e4
+			MX53_PAD_SD2_DATA2__AUDMUX_AUD4_TXD	0x1e4
+			MX53_PAD_SD2_DATA1__AUDMUX_AUD4_TXFS	0x1e4
+			MX53_PAD_SD2_DATA0__AUDMUX_AUD4_RXD	0x1e4
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_INTRQ__CAN1_TXCAN		0x1e4
+			MX53_PAD_PATA_DIOR__CAN1_RXCAN		0x1e4
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D16__ECSPI1_SCLK		0x1e4
+			MX53_PAD_EIM_D17__ECSPI1_MISO		0x1e4
+			MX53_PAD_EIM_D18__ECSPI1_MOSI		0x1e4
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT9__ECSPI2_MOSI		0x1e4
+			MX53_PAD_CSI0_DAT10__ECSPI2_MISO	0x1e4
+			MX53_PAD_EIM_CS0__ECSPI2_SCLK		0x1e4
+		>;
+	};
+
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+			MX53_PAD_EIM_DA14__GPIO3_14		0x1f0
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX53_PAD_FEC_MDC__FEC_MDC		0x1e4
+			MX53_PAD_FEC_MDIO__FEC_MDIO		0x1e4
+			MX53_PAD_FEC_REF_CLK__FEC_TX_CLK	0x1e4
+			MX53_PAD_FEC_RX_ER__FEC_RX_ER		0x1e4
+			MX53_PAD_FEC_CRS_DV__FEC_RX_DV		0x1e4
+			MX53_PAD_FEC_RXD1__FEC_RDATA_1		0x1e4
+			MX53_PAD_FEC_RXD0__FEC_RDATA_0		0x1e4
+			MX53_PAD_FEC_TX_EN__FEC_TX_EN		0x1c4
+			MX53_PAD_FEC_TXD1__FEC_TDATA_1		0x1e4
+			MX53_PAD_FEC_TXD0__FEC_TDATA_0		0x1e4
+			MX53_PAD_GPIO_1__GPIO1_1		0x1c4
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+			MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__I2C2_SDA             0x400001e4
+			MX53_PAD_EIM_EB2__I2C2_SCL		0x400001e4
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX53_PAD_KEY_ROW3__GPIO4_13		0x1e4
+			MX53_PAD_EIM_EB2__GPIO2_30		0x1e4
+		>;
+	};
+
+	pinctrl_nand: nandgrp {
+		fsl,pins = <
+			MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B	0x4
+			MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B	0x4
+			MX53_PAD_NANDF_CLE__EMI_NANDF_CLE	0x4
+			MX53_PAD_NANDF_ALE__EMI_NANDF_ALE	0x4
+			MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B	0xe0
+			MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0	0xe0
+			MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0	0x4
+			MX53_PAD_NANDF_CS1__EMI_NANDF_CS_1	0x4
+			MX53_PAD_NANDF_CS2__EMI_NANDF_CS_2	0x4
+			MX53_PAD_NANDF_CS3__EMI_NANDF_CS_3	0x4
+			MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0	0xa4
+			MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1	0xa4
+			MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2	0xa4
+			MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3	0xa4
+			MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4	0xa4
+			MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5	0xa4
+			MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6	0xa4
+			MX53_PAD_EIM_DA7__EMI_NAND_WEIM_DA_7	0xa4
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX53_PAD_GPIO_9__PWM1_PWMO		0x5
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_PATA_DIOW__UART1_TXD_MUX	0x1e4
+			MX53_PAD_PATA_DMACK__UART1_RXD_MUX	0x1e4
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D24__UART3_TXD_MUX		0x1e4
+			MX53_PAD_EIM_D25__UART3_RXD_MUX		0x1e4
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX53_PAD_KEY_COL0__UART4_TXD_MUX	0x1e4
+			MX53_PAD_KEY_ROW0__UART4_RXD_MUX	0x1e4
+		>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nand>;
+	nand-bus-width = <8>;
+	status = "okay";
+
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x00000000 0x00100000>;
+			read-only;
+		};
+
+		partition@100000 {
+			label = "u-boot";
+			reg = <0x00100000 0x00100000>;
+			read-only;
+		};
+
+		partition@200000 {
+			label = "u-boot-env";
+			reg = <0x00200000 0x00100000>;
+			read-only;
+		};
+
+		partition@1000000 {
+			label = "kernel-safe";
+			reg = <0x01000000 0x00a00000>;
+			read-only;
+		};
+
+		partition@1a00000 {
+			label = "kernel";
+			reg = <0x01a00000 0x005e0000>;
+		};
+
+		partition@2000000 {
+			label = "ubifs";
+			reg = <0x02000000 0x0e000000>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb1_vbus>;
+	phy_type = "utmi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	disable-over-current;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index 1d325576bcc0..f8d17967a67e 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -1,39 +1,34 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "imx53.dtsi"
 
 / {
 	model = "Freescale i.MX53 Smart Mobile Reference Design Board";
 	compatible = "fsl,imx53-smd", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
+		device_type = "memory";
 		reg = <0x70000000 0x40000000>;
 	};
 
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 14 0>;
-			linux,code = <115>; /* KEY_VOLUMEUP */
+			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio2 15 0>;
-			linux,code = <114>; /* KEY_VOLUMEDOWN */
+			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
 };
@@ -41,8 +36,8 @@
 &esdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
-	cd-gpios = <&gpio3 13 0>;
-	wp-gpios = <&gpio4 11 0>;
+	cd-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -56,15 +51,14 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	zigbee: mc1323@0 {
@@ -76,7 +70,7 @@
 	flash: m25p32@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32", "st,m25p";
+		compatible = "st,m25p32", "st,m25p", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <1>;
 
@@ -191,6 +185,31 @@
 			>;
 		};
 
+		pinctrl_ipu_csi0: ipucsi0grp {
+			fsl,pins = <
+				MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12    0x1c4
+				MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13    0x1c4
+				MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14    0x1c4
+				MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15    0x1c4
+				MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16    0x1c4
+				MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17    0x1c4
+				MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18    0x1c4
+				MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19    0x1c4
+				MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK 0x1e4
+				MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC   0x1e4
+				MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC    0x1e4
+				MX53_PAD_CSI0_DATA_EN__IPU_CSI0_DATA_EN 0x1e4
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX53_PAD_NANDF_WP_B__GPIO6_9   0x1e4
+				MX53_PAD_NANDF_RB0__GPIO6_10   0x1e4
+				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x1c4
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
@@ -233,12 +252,12 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
 	};
 
-	magnetometer: mag3110@0e {
+	magnetometer: mag3110@e {
 		compatible = "fsl,mag3110";
 		reg = <0x0e>;
 	};
@@ -262,11 +281,47 @@
 	camera: ov5642@3c {
 		compatible = "ovti,ov5642";
 		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		assigned-clocks = <&clks IMX5_CLK_SSI_EXT1_SEL>,
+				  <&clks IMX5_CLK_SSI_EXT1_COM_SEL>;
+		assigned-clock-parents = <&clks IMX5_CLK_PLL2_SW>,
+					 <&clks IMX5_CLK_SSI_EXT1_PODF>;
+		assigned-clock-rates = <0>, <24000000>;
+		clocks = <&clks IMX5_CLK_SSI_EXT1_GATE>;
+		clock-names = "xclk";
+		DVDD-supply = <&ldo9_reg>;
+		AVDD-supply = <&ldo7_reg>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5642_to_ipu_csi0: endpoint {
+				remote-endpoint = <&ipu_csi0_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
 	};
 
 	pmic: dialog@48 {
 		compatible = "dlg,da9053", "dlg,da9052";
 		reg = <0x48>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			ldo7_reg: ldo7 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			ldo9_reg: ldo9 {
+				regulator-min-microvolt = <1250000>;
+				regulator-max-microvolt = <3650000>;
+			};
+		};
 	};
 };
 
@@ -274,6 +329,18 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 0>;
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&ipu_csi0_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu_csi0>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu_csi0>;
+};
diff --git a/arch/arm/boot/dts/imx53-tqma53.dtsi b/arch/arm/boot/dts/imx53-tqma53.dtsi
index 4f1f0e2868bf..7e7f9f3b3906 100644
--- a/arch/arm/boot/dts/imx53-tqma53.dtsi
+++ b/arch/arm/boot/dts/imx53-tqma53.dtsi
@@ -1,13 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
  * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx53.dtsi"
@@ -16,7 +10,8 @@
 	model = "TQ TQMa53";
 	compatible = "tq,tqma53", "fsl,imx53";
 
-	memory {
+	memory@70000000 {
+		device_type = "memory";
 		reg = <0x70000000 0x40000000>; /* Up to 1GiB */
 	};
 
@@ -41,8 +36,8 @@
 	pinctrl-0 = <&pinctrl_esdhc2>,
 		    <&pinctrl_esdhc2_cdwp>;
 	vmmc-supply = <&reg_3p3v>;
-	wp-gpios = <&gpio1 2 0>;
-	cd-gpios = <&gpio1 4 0>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
@@ -55,9 +50,8 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <4>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
-		   <&gpio3 24 0>, <&gpio3 25 0>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio3 24 GPIO_ACTIVE_LOW>, <&gpio3 25 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
@@ -215,10 +209,18 @@
 	};
 };
 
+&pwm1 {
+	#pwm-cells = <2>;
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -249,9 +251,8 @@
 &cspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cspi>;
-	fsl,spi-num-chipselects = <3>;
-	cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
-		   <&gpio1 21 0>;
+	cs-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>, <&gpio1 19 GPIO_ACTIVE_LOW>,
+		   <&gpio1 21 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
@@ -274,7 +275,7 @@
 	};
 
 	eeprom: 24c64@50 {
-		compatible = "at,24c64";
+		compatible = "atmel,24c64";
 		pagesize = <32>;
 		reg = <0x50>;
 	};
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index 3b73e81dc3f0..a7f77527269d 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -1,17 +1,48 @@
 /*
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx53-tx53.dtsi"
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -22,132 +53,130 @@
 		display = &display;
 	};
 
-	soc {
-		display: display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_rgb24_vga1>;
-			status = "okay";
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_vga1>;
+		status = "okay";
 
-			port {
-				display0_in: endpoint {
-					remote-endpoint = <&ipu_di0_disp0>;
-				};
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu_di0_disp0>;
 			};
+		};
 
-			display-timings {
-				VGA {
-					clock-frequency = <25200000>;
-					hactive = <640>;
-					vactive = <480>;
-					hback-porch = <48>;
-					hsync-len = <96>;
-					hfront-porch = <16>;
-					vback-porch = <31>;
-					vsync-len = <2>;
-					vfront-porch = <12>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
+		display-timings {
+			VGA {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <48>;
+				hsync-len = <96>;
+				hfront-porch = <16>;
+				vback-porch = <31>;
+				vsync-len = <2>;
+				vfront-porch = <12>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
 
-				ETV570 {
-					clock-frequency = <25200000>;
-					hactive = <640>;
-					vactive = <480>;
-					hback-porch = <114>;
-					hsync-len = <30>;
-					hfront-porch = <16>;
-					vback-porch = <32>;
-					vsync-len = <3>;
-					vfront-porch = <10>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
+			ETV570 {
+				clock-frequency = <25200000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <114>;
+				hsync-len = <30>;
+				hfront-porch = <16>;
+				vback-porch = <32>;
+				vsync-len = <3>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
 
-				ET0350 {
-					clock-frequency = <6413760>;
-					hactive = <320>;
-					vactive = <240>;
-					hback-porch = <34>;
-					hsync-len = <34>;
-					hfront-porch = <20>;
-					vback-porch = <15>;
-					vsync-len = <3>;
-					vfront-porch = <4>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
+			ET0350 {
+				clock-frequency = <6413760>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <34>;
+				hsync-len = <34>;
+				hfront-porch = <20>;
+				vback-porch = <15>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
 
-				ET0430 {
-					clock-frequency = <9009000>;
-					hactive = <480>;
-					vactive = <272>;
-					hback-porch = <2>;
-					hsync-len = <41>;
-					hfront-porch = <2>;
-					vback-porch = <2>;
-					vsync-len = <10>;
-					vfront-porch = <2>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <1>;
-				};
+			ET0430 {
+				clock-frequency = <9009000>;
+				hactive = <480>;
+				vactive = <272>;
+				hback-porch = <2>;
+				hsync-len = <41>;
+				hfront-porch = <2>;
+				vback-porch = <2>;
+				vsync-len = <10>;
+				vfront-porch = <2>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
+			};
 
-				ET0500 {
-					clock-frequency = <33264000>;
-					hactive = <800>;
-					vactive = <480>;
-					hback-porch = <88>;
-					hsync-len = <128>;
-					hfront-porch = <40>;
-					vback-porch = <33>;
-					vsync-len = <2>;
-					vfront-porch = <10>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
+			ET0500 {
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
 
-				ET0700 { /* same as ET0500 */
-					clock-frequency = <33264000>;
-					hactive = <800>;
-					vactive = <480>;
-					hback-porch = <88>;
-					hsync-len = <128>;
-					hfront-porch = <40>;
-					vback-porch = <33>;
-					vsync-len = <2>;
-					vfront-porch = <10>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
+			ET0700 { /* same as ET0500 */
+				clock-frequency = <33264000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <88>;
+				hsync-len = <128>;
+				hfront-porch = <40>;
+				vback-porch = <33>;
+				vsync-len = <2>;
+				vfront-porch = <10>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
 
-				ETQ570 {
-					clock-frequency = <6596040>;
-					hactive = <320>;
-					vactive = <240>;
-					hback-porch = <38>;
-					hsync-len = <30>;
-					hfront-porch = <30>;
-					vback-porch = <16>;
-					vsync-len = <3>;
-					vfront-porch = <4>;
-					hsync-active = <0>;
-					vsync-active = <0>;
-					de-active = <1>;
-					pixelclk-active = <0>;
-				};
+			ETQ570 {
+				clock-frequency = <6596040>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <38>;
+				hsync-len = <30>;
+				hfront-porch = <30>;
+				vback-porch = <16>;
+				vsync-len = <3>;
+				vfront-porch = <4>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
 			};
 		};
 	};
@@ -172,28 +201,24 @@
 		default-brightness-level = <50>;
 	};
 
-	regulators {
-		reg_lcd_pwr: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LCD POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+	reg_lcd_pwr: regulator-lcd-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
 
-		reg_lcd_reset: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "LCD RESET";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+	reg_lcd_reset: regulator-lcd-reset {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
 	};
 };
 
@@ -202,9 +227,10 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2v5>;
 		VDDIO-supply = <&reg_3v3>;
 		clocks = <&mclk>;
@@ -216,9 +242,10 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <15 0>;
+		interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
 		reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
 		wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
 	};
 
 	touchscreen: tsc2007@48 {
@@ -227,10 +254,10 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_tsc2007>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <26 0>;
+		interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
 		gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = <660>;
-		linux,wakeup;
+		wakeup-source;
 	};
 };
 
diff --git a/arch/arm/boot/dts/imx53-tx53-x13x.dts b/arch/arm/boot/dts/imx53-tx53-x13x.dts
index 64804719f0f4..6cdf2082c742 100644
--- a/arch/arm/boot/dts/imx53-tx53-x13x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x13x.dts
@@ -1,6 +1,42 @@
 /*
- * Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
  * Version 2 at the following locations:
@@ -63,82 +99,47 @@
 		default-brightness-level = <50>;
 	};
 
-	regulators {
-		reg_lcd_pwr0: regulator@5 {
-			compatible = "regulator-fixed";
-			reg = <5>;
-			regulator-name = "LVDS0 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
-
-		reg_lcd_pwr1: regulator@6 {
-			compatible = "regulator-fixed";
-			reg = <6>;
-			regulator-name = "LVDS1 POWER";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-			regulator-boot-on;
-		};
+	reg_lcd_pwr0: regulator-lvds0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS0 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
 	};
-};
 
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	touchscreen2: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <23 0>;
-		wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
+	reg_lcd_pwr1: regulator-lvds1-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS1 POWER";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
 	};
 };
 
 &i2c3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_2v5>;
 		VDDIO-supply = <&reg_3v3>;
 		clocks = <&mclk>;
 	};
-
-	touchscreen1: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti1>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
-	};
 };
 
 &iomuxc {
 	imx53-tx53-x13x {
-		pinctrl_i2c2: i2c2-grp1 {
-			fsl,pins = <
-				MX53_PAD_KEY_ROW3__I2C2_SDA		0xc0000000
-				MX53_PAD_KEY_COL3__I2C2_SCL		0xc0000000
-			>;
-		};
-
 		pinctrl_lvds0: lvds0grp {
 			fsl,pins = <
 				MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
@@ -183,13 +184,14 @@
 	status = "okay";
 
 	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
+			native-mode = <&lvds0_timing0>;
+
+			lvds0_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -202,19 +204,36 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
+			};
+
+			lvds0_timing1: nl12880bc20 {
+				clock-frequency = <71000000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <50>;
+				hsync-len = <60>;
+				hfront-porch = <50>;
+				vback-porch = <5>;
+				vsync-len = <13>;
+				vfront-porch = <5>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
 
 	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "jeida";
-		fsl,data-width = <24>;
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
 		status = "okay";
 
 		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
+			native-mode = <&lvds1_timing0>;
+
+			lvds1_timing0: hsd100pxn1 {
 				clock-frequency = <65000000>;
 				hactive = <1024>;
 				vactive = <768>;
@@ -227,7 +246,7 @@
 				hsync-active = <0>;
 				vsync-active = <0>;
 				de-active = <1>;
-				pixelclk-active = <0>;
+				pixelclk-active = <1>;
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 704bd72cbfec..a439a47fb65a 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -1,15 +1,45 @@
 /*
- * Copyright 2012 <LW@KARO-electronics.de>
+ * Copyright 2012-2017 <LW@KARO-electronics.de>
  * based on imx53-qsb.dts
  *   Copyright 2011 Freescale Semiconductor, Inc.
  *   Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 #include "imx53.dtsi"
@@ -19,11 +49,17 @@
 	model = "Ka-Ro electronics TX53 module";
 	compatible = "karo,tx53", "fsl,imx53";
 
+	/* Will be filled by the bootloader */
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0>;
+	};
+
 	aliases {
 		can0 = &can2; /* Make the can interface indices consistent with TX28/TX48 modules */
 		can1 = &can1;
 		ipu = &ipu;
-		reg_can_xcvr = &reg_can_xcvr;
+		reg-can-xcvr = &reg_can_xcvr;
 		usbh1 = &usbh1;
 		usbotg = &usbotg;
 	};
@@ -32,13 +68,12 @@
 		ckih1 {
 			clock-frequency = <0>;
 		};
+	};
 
-		mclk: clock@0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			#clock-cells = <0>;
-			clock-frequency = <27000000>;
-		};
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
 	};
 
 	gpio-keys {
@@ -46,11 +81,11 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_key>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <116>; /* KEY_POWER */
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -59,68 +94,57 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_stk5led>;
 
-		user {
+		led-user {
 			label = "Heartbeat";
 			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2v5: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2V5";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
+	reg_2v5: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
 
-		reg_3v3: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_can_xcvr: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "CAN XCVR";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_can_xcvr>;
-			gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
-		};
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+	};
 
-		reg_usbh1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usbh1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1_vbus>;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 
-		reg_usbotg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usbotg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg_vbus>;
-			gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbotg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
@@ -161,7 +185,6 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <2>;
 	status = "okay";
 
 	cs-gpios = <
@@ -169,21 +192,10 @@
 		&gpio3 19 GPIO_ACTIVE_HIGH
 	>;
 
-	spidev0: spi@0 {
-		compatible = "spidev";
-		reg = <0>;
-		spi-max-frequency = <54000000>;
-	};
-
-	spidev1: spi@1 {
-		compatible = "spidev";
-		reg = <1>;
-		spi-max-frequency = <54000000>;
-	};
 };
 
 &esdhc1 {
-	cd-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc1>;
@@ -191,7 +203,7 @@
 };
 
 &esdhc2 {
-	cd-gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
 	fsl,wp-controller;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
@@ -202,31 +214,42 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>;
+	phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
 	phy-handle = <&phy0>;
 	mac-address = [000000000000]; /* placeholder; will be overwritten by bootloader */
 	status = "okay";
 
-	phy0: ethernet-phy@0 {
-		interrupt-parent = <&gpio2>;
-		interrupts = <4>;
-		device_type = "ethernet-phy";
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			interrupt-parent = <&gpio2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			device_type = "ethernet-phy";
+		};
 	};
 };
 
 &i2c1 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "gpio";
 	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-0 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 	clock-frequency = <400000>;
 	status = "okay";
 
-	rtc1: ds1339@68 {
+	rtc1: rtc@68 {
 		compatible = "dallas,ds1339";
 		reg = <0x68>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_ds1339>;
 		interrupt-parent = <&gpio4>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+		trickle-resistor-ohms = <250>;
+		trickle-diode-disable;
 	};
 };
 
@@ -369,15 +392,29 @@
 
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
-				MX53_PAD_EIM_D21__I2C1_SCL		0xc0000000
-				MX53_PAD_EIM_D28__I2C1_SDA		0xc0000000
+				MX53_PAD_EIM_D21__I2C1_SCL		0x400001e4
+				MX53_PAD_EIM_D28__I2C1_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_EIM_D21__GPIO3_21		0x400001e6
+				MX53_PAD_EIM_D28__GPIO3_28		0x400001e6
 			>;
 		};
 
 		pinctrl_i2c3: i2c3grp {
 			fsl,pins = <
-				MX53_PAD_GPIO_3__I2C3_SCL		0xc0000000
-				MX53_PAD_GPIO_6__I2C3_SDA		0xc0000000
+				MX53_PAD_GPIO_3__I2C3_SCL		0x400001e4
+				MX53_PAD_GPIO_6__I2C3_SDA		0x400001e4
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3-gpiogrp {
+			fsl,pins = <
+				MX53_PAD_GPIO_3__GPIO1_3		0x400001e6
+				MX53_PAD_GPIO_6__GPIO1_6		0x400001e6
 			>;
 		};
 
@@ -494,7 +531,6 @@
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-	#pwm-cells = <3>;
 };
 
 &sdma {
@@ -502,7 +538,6 @@
 };
 
 &ssi1 {
-	codec-handle = <&sgtl5000>;
 	status = "okay";
 };
 
@@ -513,21 +548,21 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
new file mode 100644
index 000000000000..acc44010d510
--- /dev/null
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -0,0 +1,225 @@
+/*
+ * USB armory MkI device tree file
+ * https://inversepath.com/usbarmory
+ *
+ * Copyright (C) 2015, Inverse Path
+ * Andrej Rosano <andrej@inversepath.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx53.dtsi"
+
+/ {
+	model = "Inverse Path USB armory";
+	compatible = "inversepath,imx53-usbarmory", "fsl,imx53";
+};
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@70000000 {
+		device_type = "memory";
+		reg = <0x70000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user {
+			label = "LED";
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+/*
+ * Not every i.MX53 P/N supports clock > 800MHz.
+ * As USB armory does not mount a specific P/N set a safe clock upper limit.
+ */
+&cpu0 {
+	operating-points = <
+		/* kHz */
+		166666  850000
+		400000  900000
+		800000 1050000
+	>;
+};
+
+&esdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esdhc1>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x80
+			MX53_PAD_EIM_D28__I2C1_SDA	0x80
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x1e4
+		>;
+	};
+
+	/*
+	 * UART mode pin header configuration
+	 * 3 - GPIO5[26], pull-down 100K
+	 * 4 - GPIO5[27], pull-down 100K
+	 * 5 - TX, pull-up 100K
+	 * 6 - RX, pull-up 100K
+	 * 7 - GPIO5[30], pull-down 100K
+	 */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX53_PAD_CSI0_DAT8__GPIO5_26		0xc0
+			MX53_PAD_CSI0_DAT9__GPIO5_27		0xc0
+			MX53_PAD_CSI0_DAT10__UART1_TXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT11__UART1_RXD_MUX	0x1e4
+			MX53_PAD_CSI0_DAT12__GPIO5_30		0xc0
+		>;
+	};
+};
+
+&i2c1 {
+	pinctrl-0 = <&pinctrl_i2c1_pmic>;
+	status = "okay";
+
+	ltc3589: pmic@34 {
+		compatible = "lltc,ltc3589-2";
+		reg = <0x34>;
+
+		regulators {
+			sw1_reg: sw1 {
+				regulator-min-microvolt = <591930>;
+				regulator-max-microvolt = <1224671>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456803>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3_reg: sw3 {
+				regulator-min-microvolt = <1341250>;
+				regulator-max-microvolt = <2775000>;
+				lltc,fb-voltage-divider = <270000 100000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			bb_out_reg: bb-out {
+				regulator-min-microvolt = <3387341>;
+				regulator-max-microvolt = <3387341>;
+				lltc,fb-voltage-divider = <511000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1_reg: ldo1 {
+				regulator-min-microvolt = <1306329>;
+				regulator-max-microvolt = <1306329>;
+				lltc,fb-voltage-divider = <100000 158000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2_reg: ldo2 {
+				regulator-min-microvolt = <704123>;
+				regulator-max-microvolt = <1456806>;
+				lltc,fb-voltage-divider = <180000 191000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3_reg: ldo3 {
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-boot-on;
+			};
+
+			ldo4_reg: ldo4 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3200000>;
+			};
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts
index c17d3ad6dba5..ae53d178a683 100644
--- a/arch/arm/boot/dts/imx53-voipac-bsb.dts
+++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -119,8 +113,8 @@
 &esdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_esdhc2>;
-	cd-gpios = <&gpio3 25 0>;
-	wp-gpios = <&gpio2 19 0>;
+	cd-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -130,9 +124,10 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	sgtl5000: codec@0a {
+	sgtl5000: codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
+		#sound-dai-cells = <0>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 		clocks = <&clks 150>;
diff --git a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
index ba689fbd0e41..24859d0c09c1 100644
--- a/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
+++ b/arch/arm/boot/dts/imx53-voipac-dmm-668.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Rostislav Lisovy <lisovy@gmail.com>, PiKRON s.r.o.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx53.dtsi"
@@ -17,12 +11,8 @@
 
 	memory@70000000 {
 		device_type = "memory";
-		reg = <0x70000000 0x20000000>;
-	};
-
-	memory@b0000000 {
-		device_type = "memory";
-		reg = <0xb0000000 0x20000000>;
+		reg = <0x70000000 0x20000000>,
+		      <0xb0000000 0x20000000>;
 	};
 
 	regulators {
@@ -129,8 +119,8 @@
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <4>;
-	cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>, <&gpio2 16 0>, <&gpio2 17 0>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>,
+		   <&gpio2 16 GPIO_ACTIVE_LOW>, <&gpio2 17 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -138,7 +128,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 2 0>;
+	phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -151,7 +141,7 @@
 		compatible = "dlg,da9053-aa", "dlg,da9052";
 		reg = <0x48>;
 		interrupt-parent = <&gpio7>;
-		interrupts = <11 0x8>; /* low-level active IRQ at GPIO7_11 */
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>; /* low-level active IRQ at GPIO7_11 */
 
 		regulators {
 			buck1_reg: buck1 {
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index c3e3ca9362fb..17dc13719639 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -1,22 +1,24 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include "skeleton.dtsi"
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2011 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
 #include "imx53-pinfunc.h"
 #include <dt-bindings/clock/imx5-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
 	aliases {
 		ethernet0 = &fec;
 		gpio0 = &gpio1;
@@ -29,6 +31,7 @@
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
+		ipu0 = &ipu;
 		mmc0 = &esdhc1;
 		mmc1 = &esdhc2;
 		mmc2 = &esdhc3;
@@ -69,7 +72,12 @@
 		ports = <&ipu_di0>, <&ipu_di1>;
 	};
 
-	tzic: tz-interrupt-controller@0fffc000 {
+	capture_subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu_csi0>, <&ipu_csi1>;
+	};
+
+	tzic: tz-interrupt-controller@fffc000 {
 		compatible = "fsl,imx53-tzic", "fsl,tzic";
 		interrupt-controller;
 		#interrupt-cells = <1>;
@@ -77,35 +85,54 @@
 	};
 
 	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ckil {
-			compatible = "fsl,imx-ckil", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <32768>;
 		};
 
 		ckih1 {
-			compatible = "fsl,imx-ckih1", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <22579200>;
 		};
 
 		ckih2 {
-			compatible = "fsl,imx-ckih2", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <0>;
 		};
 
 		osc {
-			compatible = "fsl,imx-osc", "fixed-clock";
+			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <24000000>;
 		};
 	};
 
-	soc {
+	pmu: pmu {
+		compatible = "arm,cortex-a8-pmu";
+		interrupt-parent = <&tzic>;
+		interrupts = <77>;
+	};
+
+	usbphy0: usbphy-0 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	usbphy1: usbphy-1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
+		clock-names = "main_clk";
+		#phy-cells = <0>;
+		status = "okay";
+	};
+
+	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "simple-bus";
@@ -130,11 +157,25 @@
 			reg = <0x18000000 0x08000000>;
 			interrupts = <11 10>;
 			clocks = <&clks IMX5_CLK_IPU_GATE>,
-			         <&clks IMX5_CLK_IPU_DI0_GATE>,
-			         <&clks IMX5_CLK_IPU_DI1_GATE>;
+				 <&clks IMX5_CLK_IPU_DI0_GATE>,
+				 <&clks IMX5_CLK_IPU_DI1_GATE>;
 			clock-names = "bus", "di0", "di1";
 			resets = <&src 2>;
 
+			ipu_csi0: port@0 {
+				reg = <0>;
+
+				ipu_csi0_from_parallel_sensor: endpoint {
+				};
+			};
+
+			ipu_csi1: port@1 {
+				reg = <1>;
+
+				ipu_csi1_from_parallel_sensor: endpoint {
+				};
+			};
+
 			ipu_di0: port@2 {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -171,39 +212,49 @@
 			};
 		};
 
-		aips@50000000 { /* AIPS1 */
+		gpu: gpu@30000000 {
+			compatible = "amd,imageon-200.0", "amd,imageon";
+			reg = <0x30000000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <12>;
+			interrupt-names = "kgsl_3d0_irq";
+			clocks = <&clks IMX5_CLK_GPU3D_GATE>, <&clks IMX5_CLK_GARB_GATE>;
+			clock-names = "core_clk", "mem_iface_clk";
+		};
+
+		aips1: bus@50000000 { /* AIPS1 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			reg = <0x50000000 0x10000000>;
 			ranges;
 
-			spba@50000000 {
+			spba-bus@50000000 {
 				compatible = "fsl,spba-bus", "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = <0x50000000 0x40000>;
 				ranges;
 
-				esdhc1: esdhc@50004000 {
+				esdhc1: mmc@50004000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50004000 0x4000>;
 					interrupts = <1>;
 					clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC1_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC1_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc2: esdhc@50008000 {
+				esdhc2: mmc@50008000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50008000 0x4000>;
 					interrupts = <2>;
 					clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC2_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC2_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -214,19 +265,21 @@
 					reg = <0x5000c000 0x4000>;
 					interrupts = <33>;
 					clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
-					         <&clks IMX5_CLK_UART3_PER_GATE>;
+						 <&clks IMX5_CLK_UART3_PER_GATE>;
 					clock-names = "ipg", "per";
+					dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
+					dma-names = "rx", "tx";
 					status = "disabled";
 				};
 
-				ecspi1: ecspi@50010000 {
+				ecspi1: spi@50010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 					reg = <0x50010000 0x4000>;
 					interrupts = <36>;
 					clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
-					         <&clks IMX5_CLK_ECSPI1_PER_GATE>;
+						 <&clks IMX5_CLK_ECSPI1_PER_GATE>;
 					clock-names = "ipg", "per";
 					status = "disabled";
 				};
@@ -248,25 +301,25 @@
 					status = "disabled";
 				};
 
-				esdhc3: esdhc@50020000 {
+				esdhc3: mmc@50020000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50020000 0x4000>;
 					interrupts = <3>;
 					clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC3_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC3_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc4: esdhc@50024000 {
+				esdhc4: mmc@50024000 {
 					compatible = "fsl,imx53-esdhc";
 					reg = <0x50024000 0x4000>;
 					interrupts = <4>;
 					clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
-					         <&clks IMX5_CLK_DUMMY>,
-					         <&clks IMX5_CLK_ESDHC4_PER_GATE>;
+						 <&clks IMX5_CLK_DUMMY>,
+						 <&clks IMX5_CLK_ESDHC4_PER_GATE>;
 					clock-names = "ipg", "ahb", "per";
 					bus-width = <4>;
 					status = "disabled";
@@ -278,20 +331,6 @@
 				reg = <0x53f00000 0x60>;
 			};
 
-			usbphy0: usbphy@0 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
-				clock-names = "main_clk";
-				status = "okay";
-			};
-
-			usbphy1: usbphy@1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
-				clock-names = "main_clk";
-				status = "okay";
-			};
-
 			usbotg: usb@53f80000 {
 				compatible = "fsl,imx53-usb", "fsl,imx27-usb";
 				reg = <0x53f80000 0x0200>;
@@ -388,14 +427,14 @@
 				status = "disabled";
 			};
 
-			wdog1: wdog@53f98000 {
+			wdog1: watchdog@53f98000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f98000 0x4000>;
 				interrupts = <58>;
 				clocks = <&clks IMX5_CLK_DUMMY>;
 			};
 
-			wdog2: wdog@53f9c000 {
+			wdog2: watchdog@53f9c000 {
 				compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
 				reg = <0x53f9c000 0x4000>;
 				interrupts = <59>;
@@ -408,10 +447,17 @@
 				reg = <0x53fa0000 0x4000>;
 				interrupts = <39>;
 				clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
-				         <&clks IMX5_CLK_GPT_HF_GATE>;
+					 <&clks IMX5_CLK_GPT_HF_GATE>;
 				clock-names = "ipg", "per";
 			};
 
+			srtc: rtc@53fa4000 {
+				compatible = "fsl,imx53-rtc";
+				reg = <0x53fa4000 0x4000>;
+				interrupts = <24>;
+				clocks = <&clks IMX5_CLK_SRTC_GATE>;
+			};
+
 			iomuxc: iomuxc@53fa8000 {
 				compatible = "fsl,imx53-iomuxc";
 				reg = <0x53fa8000 0x4000>;
@@ -429,11 +475,11 @@
 				reg = <0x53fa8008 0x4>;
 				gpr = <&gpr>;
 				clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
-				         <&clks IMX5_CLK_LDB_DI1_SEL>,
-				         <&clks IMX5_CLK_IPU_DI0_SEL>,
-				         <&clks IMX5_CLK_IPU_DI1_SEL>,
-				         <&clks IMX5_CLK_LDB_DI0_GATE>,
-				         <&clks IMX5_CLK_LDB_DI1_GATE>;
+					 <&clks IMX5_CLK_LDB_DI1_SEL>,
+					 <&clks IMX5_CLK_IPU_DI0_SEL>,
+					 <&clks IMX5_CLK_IPU_DI1_SEL>,
+					 <&clks IMX5_CLK_LDB_DI0_GATE>,
+					 <&clks IMX5_CLK_LDB_DI1_GATE>;
 				clock-names = "di0_pll", "di1_pll",
 					      "di0_sel", "di1_sel",
 					      "di0", "di1";
@@ -452,6 +498,10 @@
 							remote-endpoint = <&ipu_di0_lvds0>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+					};
 				};
 
 				lvds-channel@1 {
@@ -467,25 +517,29 @@
 							remote-endpoint = <&ipu_di1_lvds1>;
 						};
 					};
+
+					port@2 {
+						reg = <2>;
+					};
 				};
 			};
 
 			pwm1: pwm@53fb4000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb4000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM1_HF_GATE>;
+					 <&clks IMX5_CLK_PWM1_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <61>;
 			};
 
 			pwm2: pwm@53fb8000 {
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 				reg = <0x53fb8000 0x4000>;
 				clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
-				         <&clks IMX5_CLK_PWM2_HF_GATE>;
+					 <&clks IMX5_CLK_PWM2_HF_GATE>;
 				clock-names = "ipg", "per";
 				interrupts = <94>;
 			};
@@ -495,8 +549,10 @@
 				reg = <0x53fbc000 0x4000>;
 				interrupts = <31>;
 				clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
-				         <&clks IMX5_CLK_UART1_PER_GATE>;
+					 <&clks IMX5_CLK_UART1_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
@@ -505,34 +561,37 @@
 				reg = <0x53fc0000 0x4000>;
 				interrupts = <32>;
 				clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
-				         <&clks IMX5_CLK_UART2_PER_GATE>;
+					 <&clks IMX5_CLK_UART2_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
 			can1: can@53fc8000 {
-				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fc8000 0x4000>;
 				interrupts = <82>;
 				clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
-				         <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
+					 <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
 			can2: can@53fcc000 {
-				compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
+				compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
 				reg = <0x53fcc000 0x4000>;
 				interrupts = <83>;
 				clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
-				         <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
+					 <&clks IMX5_CLK_CAN2_SERIAL_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
-			src: src@53fd0000 {
+			src: reset-controller@53fd0000 {
 				compatible = "fsl,imx53-src", "fsl,imx51-src";
 				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
 				#reset-cells = <1>;
 			};
 
@@ -588,13 +647,15 @@
 				reg = <0x53ff0000 0x4000>;
 				interrupts = <13>;
 				clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
-				         <&clks IMX5_CLK_UART4_PER_GATE>;
+					 <&clks IMX5_CLK_UART4_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 		};
 
-		aips@60000000 {	/* AIPS2 */
+		aips2: bus@60000000 {	/* AIPS2 */
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -606,8 +667,8 @@
 				reg = <0x63f00000 0x60>;
 			};
 
-			iim: iim@63f98000 {
-				compatible = "fsl,imx53-iim", "fsl,imx27-iim";
+			iim: efuse@63f98000 {
+				compatible = "fsl,imx53-iim", "fsl,imx27-iim", "syscon";
 				reg = <0x63f98000 0x4000>;
 				interrupts = <69>;
 				clocks = <&clks IMX5_CLK_IIM_GATE>;
@@ -618,11 +679,18 @@
 				reg = <0x63f90000 0x4000>;
 				interrupts = <86>;
 				clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
-				         <&clks IMX5_CLK_UART5_PER_GATE>;
+					 <&clks IMX5_CLK_UART5_PER_GATE>;
 				clock-names = "ipg", "per";
+				dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
+				dma-names = "rx", "tx";
 				status = "disabled";
 			};
 
+			tigerp: tigerp@63fa0000 {
+				compatible = "fsl,imx53-tigerp", "fsl,imx51-tigerp";
+				reg = <0x63fa0000 0x28>;
+			};
+
 			owire: owire@63fa4000 {
 				compatible = "fsl,imx53-owire", "fsl,imx21-owire";
 				reg = <0x63fa4000 0x4000>;
@@ -630,37 +698,37 @@
 				status = "disabled";
 			};
 
-			ecspi2: ecspi@63fac000 {
+			ecspi2: spi@63fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
 				reg = <0x63fac000 0x4000>;
 				interrupts = <37>;
 				clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
-				         <&clks IMX5_CLK_ECSPI2_PER_GATE>;
+					 <&clks IMX5_CLK_ECSPI2_PER_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
-			sdma: sdma@63fb0000 {
+			sdma: dma-controller@63fb0000 {
 				compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
 				reg = <0x63fb0000 0x4000>;
 				interrupts = <6>;
 				clocks = <&clks IMX5_CLK_SDMA_GATE>,
-				         <&clks IMX5_CLK_SDMA_GATE>;
+					 <&clks IMX5_CLK_AHB>;
 				clock-names = "ipg", "ahb";
 				#dma-cells = <3>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
 			};
 
-			cspi: cspi@63fc0000 {
+			cspi: spi@63fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
 				clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
-				         <&clks IMX5_CLK_CSPI_IPG_GATE>;
+					 <&clks IMX5_CLK_CSPI_IPG_GATE>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -736,8 +804,8 @@
 				reg = <0x63fec000 0x4000>;
 				interrupts = <87>;
 				clocks = <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>,
-				         <&clks IMX5_CLK_FEC_GATE>;
+					 <&clks IMX5_CLK_FEC_GATE>,
+					 <&clks IMX5_CLK_FEC_GATE>;
 				clock-names = "ipg", "ahb", "ptp";
 				status = "disabled";
 			};
@@ -747,7 +815,7 @@
 				reg = <0x63ff0000 0x1000>;
 				interrupts = <92>;
 				clocks = <&clks IMX5_CLK_TVE_GATE>,
-				         <&clks IMX5_CLK_IPU_DI1_SEL>;
+					 <&clks IMX5_CLK_IPU_DI1_SEL>;
 				clock-names = "tve", "di_sel";
 				status = "disabled";
 
@@ -763,7 +831,7 @@
 				reg = <0x63ff4000 0x1000>;
 				interrupts = <9>;
 				clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
-				         <&clks IMX5_CLK_VPU_GATE>;
+					 <&clks IMX5_CLK_VPU_GATE>;
 				clock-names = "per", "ahb";
 				resets = <&src 1>;
 				iram = <&ocram>;
@@ -774,7 +842,7 @@
 				reg = <0x63ff8000 0x4000>;
 				interrupts = <19 20>;
 				clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
-				         <&clks IMX5_CLK_SAHARA_IPG_GATE>;
+					 <&clks IMX5_CLK_SAHARA_IPG_GATE>;
 				clock-names = "ipg", "ahb";
 			};
 		};
@@ -782,12 +850,10 @@
 		ocram: sram@f8000000 {
 			compatible = "mmio-sram";
 			reg = <0xf8000000 0x20000>;
+			ranges = <0 0xf8000000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX5_CLK_OCRAM>;
 		};
-
-		pmu {
-			compatible = "arm,cortex-a8-pmu";
-			interrupts = <77>;
-		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
new file mode 100644
index 000000000000..d477a937b47a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -0,0 +1,561 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/ {
+	keyboard {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&pcf8575 0 GPIO_ACTIVE_LOW>;
+			label = "btn0";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&pcf8575 1 GPIO_ACTIVE_LOW>;
+			label = "btn1";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&pcf8575 2 GPIO_ACTIVE_LOW>;
+			label = "btn2";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&pcf8575 3 GPIO_ACTIVE_LOW>;
+			label = "btn3";
+			linux,code = <KEY_WAKEUP>;
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		gen-led0 {
+			label = "led0";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_led0>;
+			gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu0";
+		};
+
+		gen-led1 {
+			label = "led1";
+			gpios = <&pcf8575 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		gen-led2 {
+			label = "led2";
+			gpios = <&pcf8575 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		gen-led3 {
+			label = "led3";
+			gpios = <&pcf8575 10 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_otg>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_3v3: regulator-3v3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_3v3>;
+		compatible = "regulator-fixed";
+		regulator-name = "reg_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_enet: regulator-ethernet {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_enet>;
+		compatible = "regulator-fixed";
+		regulator-name = "ethernet-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		vin-supply = <&sw4_reg>;
+	};
+
+	reg_audio: regulator-audio {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_audio>;
+		compatible = "regulator-fixed";
+		regulator-name = "3v3_aud";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_hdmi>;
+		compatible = "regulator-fixed";
+		regulator-name = "hdmi-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_uart3: regulator-uart3 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_uart3>;
+		compatible = "regulator-fixed";
+		regulator-name = "uart3-supply";
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_1v8>;
+		compatible = "regulator-fixed";
+		regulator-name = "1v8-supply";
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_pcie>;
+		regulator-name = "mpcie_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mipi: regulator-mipi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_mipi>;
+		regulator-name = "mipi_pwr_en";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-wm8962";
+		model = "wm8962-audio";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&wm8962>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"Ext Spk", "SPKOUTL",
+			"Ext Spk", "SPKOUTR",
+			"AMIC", "MICBIAS",
+			"IN3R", "AMIC";
+		mux-int-port = <2>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-supply = <&reg_enet>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	wm8962: audio-codec@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		DCVDD-supply = <&reg_audio>;
+		DBVDD-supply = <&reg_audio>;
+		AVDD-supply = <&reg_audio>;
+		CPVDD-supply = <&reg_audio>;
+		MICVDD-supply = <&reg_audio>;
+		PLLVDD-supply = <&reg_audio>;
+		SPKVDD1-supply = <&reg_audio>;
+		SPKVDD2-supply = <&reg_audio>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+};
+
+&i2c3 {
+	ov5640: camera@10 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x10>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_mipi>;
+		AVDD-supply = <&reg_mipi>;
+		DVDD-supply = <&reg_mipi>;
+		reset-gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pcf8575: gpio@20 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcf8574>;
+		compatible = "nxp,pcf8575";
+		reg = <0x20>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		lines-initial-states = <0x0710>;
+		wakeup-source;
+	};
+};
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3v3>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0	/* ENET_INT */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x1b0b0	/* ETHR_nRST */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_led0: led0grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+	    >;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b1
+		>;
+	};
+
+	pinctrl_pcf8574: pcf8575grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+	    >;
+	};
+
+	pinctrl_reg_1v8: reg1v8grp {
+	    fsl,pins = <
+		MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_3v3: reg3v3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_audio: reg-audiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_enet: reg-enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_hdmi: reg-hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_mipi: reg-mipigrp {
+		fsl,pins = <MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b1>;
+	};
+
+	pinctrl_reg_pcie: reg-pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b0b0
+			>;
+	};
+
+	pinctrl_reg_uart3: reguart3grp {
+	    fsl,pins = <
+		MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+	    >;
+	};
+
+	pinctrl_reg_usb_h1_vbus: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_usb_otg: reg-usb-otggrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0xd17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10069
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17069
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: h100-usdhc2-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: h100-usdhc2-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+		>;
+	};
+
+};
diff --git a/arch/arm/boot/dts/imx6-logicpd-som.dtsi b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
new file mode 100644
index 000000000000..547fb141ec0c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6-logicpd-som.dtsi
@@ -0,0 +1,369 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1837";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddcore";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <725000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-name = "vddsoc";
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_3v3";
+				regulator-boot-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3a_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-name = "sw3b_vddr";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "gen_rgmii";
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-name = "gen_5v0";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-name = "gen_vsns";
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "gen_1v5";
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-name = "vgen2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-name = "gen_vadj_0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-name = "gen_1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-name = "gen_vadj_1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-name = "gen_2v5";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			coin_reg: coin {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	temperature-sensor@49 {
+		compatible = "ti,tmp102";
+		reg = <0x49>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	temperature-sensor@4a {
+		compatible = "ti,tmp102";
+		reg = <0x4a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tempsense>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		#thermal-sensor-cells = <1>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		read-only;	/* Manufacturing EEPROM programmed at factory */
+		reg = <0x51>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+/* Reroute power feeding the CPU to come from the external PMIC */
+&reg_arm
+{
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_soc
+{
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_gpmi_nand: gpmi-nandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0x0b0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0x0b000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0x0b0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0x0b0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0x0b0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0x0b0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0x0b0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0x0b0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0x0b0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0x0b0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0x0b0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0x0b0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0x0b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <	/* Enable ARM Debugger */
+			MX6QDL_PAD_CSI0_MCLK__ARM_TRACE_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__ARM_EVENTO	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__ARM_TRACE00	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__ARM_TRACE_CLK	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__ARM_TRACE01	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__ARM_TRACE02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__ARM_TRACE03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__ARM_TRACE04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__ARM_TRACE05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__ARM_TRACE06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__ARM_TRACE08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__ARM_TRACE09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__ARM_TRACE10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__ARM_TRACE11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__ARM_TRACE12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__ARM_TRACE13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__ARM_TRACE14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__ARM_TRACE15	0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1        0x130b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_tempsense: tempsensegrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x13059	/* BT_EN */
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x170B9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x100B9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x170B9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x170B9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x170B9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17049
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10049
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17049
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17049
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17049
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17049
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x130b0 /* WL_IRQ */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x17059 /* WLAN_EN */
+		>;
+	};
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		  compatible = "ti,wl1837";
+		  reg = <2>;
+		  interrupt-parent = <&gpio7>;
+		  interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		  tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-alti6p.dts b/arch/arm/boot/dts/imx6dl-alti6p.dts
new file mode 100644
index 000000000000..e6a4e2770640
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-alti6p.dts
@@ -0,0 +1,568 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Altesco I6P Board";
+	compatible = "alt,alti6p", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	clock_ksz8081: clock-ksz8081 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	i2c2-mux {
+		compatible = "i2c-mux";
+		i2c-parent = <&i2c2>;
+		mux-controls = <&i2c_mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c4-mux {
+		compatible = "i2c-mux";
+		i2c-parent = <&i2c4>;
+		mux-controls = <&i2c_mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	i2c_mux: mux-controller {
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2cmux>;
+
+		mux-gpios = <&gpio5 10 GPIO_ACTIVE_HIGH>,
+			    <&gpio5 11 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "SD1_CD", "", "USB_H1_OC", "", "", "", "",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "ECSPI1_SS1", "", "USB_EXT1_OC", "USB_EXT1_PWR", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ETH_RESET", "", "", "BUZZER", "ETH_INTRP", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "I2C_EN13", "I2C_EN24", "", "", "", "",
+		"", "", "", "", "", "AUDIO_RESET", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+/* DDC */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c2 {
+	clock-frequency = <50000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	/* external interface, device are configured from user space */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&i2c4 {
+	clock-frequency = <50000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T configure DDC
+			 * pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE		0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL			0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__I2C4_SDA			0x4001f8b1
+			MX6QDL_PAD_NANDF_WP_B__I2C4_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2cmux: i2cmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC			0x1B058
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1B058
+
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-apf6dev.dts b/arch/arm/boot/dts/imx6dl-apf6dev.dts
index df26e542ab3a..3dcce3454b08 100644
--- a/arch/arm/boot/dts/imx6dl-apf6dev.dts
+++ b/arch/arm/boot/dts/imx6dl-apf6dev.dts
@@ -1,49 +1,6 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
 
 /dts-v1/;
 #include "imx6dl.dtsi"
@@ -54,7 +11,8 @@
 	model = "Armadeus APF6 Solo Module on APF6Dev Board";
 	compatible = "armadeus,imx6dl-apf6dev", "armadeus,imx6dl-apf6", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x20000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
index bb92f309c191..dfa6f64d43cc 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
@@ -12,17 +12,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -31,11 +31,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -46,13 +46,14 @@
 
 / {
 	model = "aristainetos2 i.MX6 Dual Lite Board 4";
-	compatible = "fsl,imx6dl";
+	compatible = "abb,aristainetos2-imx6dl-4", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
-	display0: display@di0 {
+	display0: disp0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,imx-parallel-display";
@@ -78,8 +79,6 @@
 
 &ecspi1 {
 	lcd_panel: display@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
 		compatible = "lg,lg4573";
 		spi-max-frequency = <10000000>;
 		reg = <0>;
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
index 3d5ad2cc7e22..5e15212eaf3a 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos2_7.dts
@@ -12,17 +12,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -31,11 +31,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -46,9 +46,10 @@
 
 / {
 	model = "aristainetos2 i.MX6 Dual Lite Board 7";
-	compatible = "fsl,imx6dl";
+	compatible = "abb,aristainetos2-imx6dl-7", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
index d4c4a22db488..cc861a43eb58 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * support fot the imx6 based aristainetos board
  *
  * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
@@ -14,7 +10,7 @@
 
 / {
 	model = "aristainetos i.MX6 Dual Lite Board 4";
-	compatible = "fsl,imx6dl";
+	compatible = "abb,aristainetos-imx6dl-4", "fsl,imx6dl";
 
 	backlight {
 		compatible = "pwm-backlight";
@@ -27,47 +23,45 @@
 		status = "okay";
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		display0: display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp>;
-			status = "okay";
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+		status = "okay";
 
-			display-timings {
-				480x800p60 {
-					native-mode;
-					clock-frequency = <30000000>;
-					hactive = <480>;
-					vactive = <800>;
-					hfront-porch = <59>;
-					hback-porch = <10>;
-					hsync-len = <10>;
-					vback-porch = <15>;
-					vfront-porch = <15>;
-					vsync-len = <15>;
-					hsync-active = <1>;
-					vsync-active = <1>;
-				};
+		display-timings {
+			480x800p60 {
+				native-mode;
+				clock-frequency = <30000000>;
+				hactive = <480>;
+				vactive = <800>;
+				hfront-porch = <59>;
+				hback-porch = <10>;
+				hsync-len = <10>;
+				vback-porch = <15>;
+				vfront-porch = <15>;
+				vsync-len = <15>;
+				hsync-active = <1>;
+				vsync-active = <1>;
 			};
+		};
 
-			port {
-				display0_in: endpoint {
-					remote-endpoint = <&ipu1_di0_disp0>;
-				};
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
 			};
 		};
 	};
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
@@ -85,5 +79,6 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
index 15203f0e9725..b6cb78870cd5 100644
--- a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
+++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * support fot the imx6 based aristainetos board
  *
  * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
@@ -14,40 +10,39 @@
 
 / {
 	model = "aristainetos i.MX6 Dual Lite Board 7";
-	compatible = "fsl,imx6dl";
+	compatible = "abb,aristainetos-imx6dl-7", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
-	soc {
-		display0: display@di0 {
-			compatible = "fsl,imx-parallel-display";
-			interface-pix-fmt = "rgb24";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_ipu_disp>;
-			status = "okay";
+	display0: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu_disp>;
+		status = "okay";
 
-			display-timings {
-				800x480p60 {
-					native-mode;
-					clock-frequency = <33246000>;
-					hactive = <800>;
-					vactive = <480>;
-					hfront-porch = <88>;
-					hback-porch = <88>;
-					hsync-len = <80>;
-					vback-porch = <10>;
-					vfront-porch = <10>;
-					vsync-len = <25>;
-					vsync-active = <1>;
-				};
+		display-timings {
+			800x480p60 {
+				native-mode;
+				clock-frequency = <33246000>;
+				hactive = <800>;
+				vactive = <480>;
+				hfront-porch = <88>;
+				hback-porch = <88>;
+				hsync-len = <80>;
+				vback-porch = <10>;
+				vfront-porch = <10>;
+				vsync-len = <25>;
+				vsync-active = <1>;
 			};
+		};
 
-			port {
-				display0_in: endpoint {
-					remote-endpoint = <&ipu1_di0_disp0>;
-				};
+		port {
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
 			};
 		};
 	};
@@ -74,5 +69,6 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-b105pv2.dts b/arch/arm/boot/dts/imx6dl-b105pv2.dts
new file mode 100644
index 000000000000..411aa72d344b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b105pv2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	model = "General Electric B105Pv2";
+	compatible = "ge,imx6dl-b105pv2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g101evn010";
+	};
+};
+
+&i2c3 {
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b105v2.dts b/arch/arm/boot/dts/imx6dl-b105v2.dts
new file mode 100644
index 000000000000..d011127c635b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b105v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B105v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B105v2";
+	compatible = "ge,imx6dl-b105v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g101evn010";
+	};
+};
+
+&i2c3 {
+	touchscreen@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b125pv2.dts b/arch/arm/boot/dts/imx6dl-b125pv2.dts
new file mode 100644
index 000000000000..ca840fa84052
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b125pv2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125Pv2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	model = "General Electric B125Pv2";
+	compatible = "ge,imx6dl-b125pv2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g121ean01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h60";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b125v2.dts b/arch/arm/boot/dts/imx6dl-b125v2.dts
new file mode 100644
index 000000000000..81e5a9cb8900
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b125v2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B125v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B125v2";
+	compatible = "ge,imx6dl-b125v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g121ean01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h60";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b155v2.dts b/arch/arm/boot/dts/imx6dl-b155v2.dts
new file mode 100644
index 000000000000..c861937b30f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b155v2.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B155v2
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+/dts-v1/;
+#include "imx6dl-b1x5v2.dtsi"
+
+/ {
+	model = "General Electric B155v2";
+	compatible = "ge,imx6dl-b155v2", "congatec,qmx6", "fsl,imx6dl";
+
+	panel {
+		compatible = "auo,g156xtn01";
+	};
+};
+
+&i2c3 {
+	touchscreen@2a {
+		compatible = "eeti,exc80h84";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 =<&pinctrl_q7_gpio0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		reset-gpios = <&tca6424a 21 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
new file mode 100644
index 000000000000..37697fac9dea
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5Pv2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-qmx6.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	/* Do not allow frequencies above 800MHz */
+	cpus {
+		cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz	SOC-PU uV */
+				792000	1175000
+				396000	1175000
+			>;
+		};
+
+		cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz	SOC-PU uV */
+				792000	1175000
+				396000	1175000
+			>;
+		};
+	};
+
+	reg_syspwr: regulator-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_PWR";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	reg_5v_pmc: regulator-5v-pmc {
+		compatible = "regulator-fixed";
+		regulator-name = "5V PMC";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_syspwr>;
+	};
+
+	reg_5v0_audio: regulator-5v0-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "5V0_AUDIO";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+		gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		/*
+		 * This must be always-on for da7212, which has some not
+		 * properly documented dependencies for it's speaker supply
+		 * pin. The issue manifests as speaker volume being very low.
+		 */
+		regulator-always-on;
+	};
+
+
+	reg_3v3_audio: regulator-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_3v3>;
+		pinctrl-0 = <&pinctrl_q7_hda_reset>;
+		pinctrl-names = "default";
+		gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_2v5_audio: regulator-2v5-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "2V5_AUDIO";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3_audio>;
+
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "WLAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_3v3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_sdio_power>;
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <70000>;
+	};
+
+	reg_bl: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "LED_VCC";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		vin-supply = <&reg_syspwr>;
+		pinctrl-0 = <&pinctrl_q7_lcd_power>;
+		pinctrl-names = "default";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	usb_power: regulator-usb-power {
+		compatible = "regulator-fixed";
+		regulator-name = "USB POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5v>;
+	};
+
+	charger: battery-charger {
+		compatible = "gpio-charger"; /* ti,bq24172 */
+		charger-type = "mains";
+		gpios = <&tca6424a 3 GPIO_ACTIVE_LOW>;
+		charge-current-limit-gpios = <&tca6424a 11 GPIO_ACTIVE_HIGH>,
+					     <&tca6424a 12 GPIO_ACTIVE_HIGH>;
+		charge-current-limit-mapping = <1300000 0x0>,
+					       <700000 0x1>,
+					       <0 0x2>;
+		charge-status-gpios = <&tca6424a 6 GPIO_ACTIVE_HIGH>;
+	};
+
+	poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_spi_cs1>;
+		gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+	};
+
+	power-button-key {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_sleep_button>;
+
+		power-button {
+			label = "power button";
+			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	rotary-encoder-key {
+		compatible = "gpio-keys";
+
+		rotary-encoder-event {
+			label = "rotary-encoder press";
+			gpios = <&tca6424a 0 GPIO_ACTIVE_HIGH>;
+			linux,code = <KEY_ENTER>;
+			linux,can-disable;
+		};
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio2 &pinctrl_q7_gpio4>;
+		gpios = <&gpio4 26 GPIO_ACTIVE_LOW>, <&gpio1 0 GPIO_ACTIVE_LOW>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,steps-per-period = <2>;
+		wakeup-source;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
+
+		led-alarm1 {
+			label = "alarm:red";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-alarm2 {
+			label = "alarm:yellow";
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-alarm3 {
+			label = "alarm:blue";
+			gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_backlight_enable>;
+		power-supply = <&reg_bl>;
+		pwms = <&pwm4 0 5000000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <179>;
+		enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	panel {
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets = "Speaker", "Ext Spk";
+		simple-audio-card,audio-routing = "Ext Spk", "LINE";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&codec>;
+		};
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	battery: battery@b {
+		compatible = "ti,bq20z65", "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,battery-detect-gpios = <&tca6424a 5 GPIO_ACTIVE_LOW>;
+		sbs,i2c-retry-count = <5>;
+		power-supplies = <&charger>;
+	};
+
+	codec: audio-codec@1a {
+		compatible = "dlg,da7212";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_2v5_audio>;
+		VDDSP-supply = <&reg_5v0_audio>;
+		VDDMIC-supply = <&reg_3v3_audio>;
+		VDDIO-supply = <&reg_3v3_audio>;
+		clocks = <&clk_ext_audio_codec>;
+		clock-names = "mclk";
+	};
+};
+
+&i2c5 {
+	tca6424a: gpio-controller@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio6>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "GPIO_ROTOR#", "ACM_IO_INT", "TMP_SENSOR_IRQ", "AC_IN",
+				  "TF_S", "BATT_T", "LED_INC_CHAR", "ACM1_OCF",
+				  "ACM2_OCF", "ACM_IO_RST", "USB1_POWER_EN", "EGPIO_CC_CTL0",
+				  "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
+				  "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL",
+				  "MARKER_EN", "EGPIO_TOUCH_RST", "PRESSURE_INT1", "PRESSURE_INT2";
+
+	};
+
+	tmp75: temperature-sensor@48 {
+		compatible = "ti,tmp75";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+		interrupt-parent = <&tca6424a>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&usb_power>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+
+	/*
+	 * TPS2051BDGN fault-gpio is connected to Q7[86] USB_0_1_OC_N.
+	 * On QMX6 this is not connceted to the i.MX6, but to the USB Hub
+	 * from &usbh1. This means, that we cannot easily detect and handle
+	 * over-current events. Fortunately the regulator limits the current
+	 * automatically, so the hardware is still protected.
+	 */
+};
+
+&usdhc4 {
+	/* WiFi module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	vmmc-supply = <&reg_wlan>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_q7_gpio7>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+
+		tcxo-clock-frequency = <26000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
new file mode 100644
index 000000000000..f028b6a191df
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-b1x5v2.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for General Electric B1x5v2
+// patient monitor series
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+
+#include <dt-bindings/input/input.h>
+#include "imx6dl-b1x5pv2.dtsi"
+
+/ {
+	reg_3v3_acm: regulator-3v3-acm {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3 ACM";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&i2c1 {
+	tca6416: gpio-controller@21 {
+		compatible = "ti,tca6416";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		reset-gpios = <&tca6424a 9 GPIO_ACTIVE_LOW>;
+		vcc-supply = <&reg_3v3_acm>;
+		gpio-line-names = "ACM1_EN", "ACM1_CL0", "ACM1_CL1", "ACM1_CL2",
+				  "", "ACM2_EN", "ACM2_CL0", "ACM2_CL1",
+				  "ACM2_CL2", "", "", "",
+				  "", "", "", "";
+
+		/*
+		 * The interrupt pin is connected to &tca6424a pin 1, but the Linux
+		 * TCA6424 driver cannot handle low type interrupts at the moment
+		 * (and support cannot be added without some ugly hacks). Since this
+		 * controller does not have any input type GPIOs, just pretend
+		 * that the interrupt pin is unconnected.
+		 */
+	};
+};
+
+&i2c5 {
+	mpl3115a2: pressure-sensor@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+
+		/*
+		 * The MPL3115 interrupts are connected to pin 22 and 23
+		 * of &tca6424a, but the binding does not yet support
+		 * interrupts.
+		 */
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-aster.dts b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
new file mode 100644
index 000000000000..82a0d1a28d12
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-aster.dts
@@ -0,0 +1,114 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Aster Board";
+	compatible = "toradex,colibri_imx6dl-aster", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <
+		&gpio5 2 GPIO_ACTIVE_HIGH
+		&gpio5 4 GPIO_ACTIVE_HIGH
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4 &pinctrl_csi_gpio_2>;
+	status = "okay";
+};
+
+/* Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 */
+&i2c3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_csi_gpio_1
+		&pinctrl_gpio_2
+		&pinctrl_gpio_aster
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+		&pinctrl_weim_gpio_5
+	>;
+
+	pinctrl_gpio_aster: gpioaster {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
new file mode 100644
index 000000000000..f50a26dd34c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-eval-v3", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	/* Fixed crystal dedicated to mcp251x */
+	clk16m: clock-16m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <16000000>;
+		clock-output-names = "clk16m";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+
+	mcp251x0: mcp251x@0 {
+		compatible = "microchip,mcp2515";
+		clocks = <&clk16m>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <27 0x2>;
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+		status = "okay";
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_weim_gpio_1 &pinctrl_weim_gpio_2
+		&pinctrl_weim_gpio_3 &pinctrl_weim_gpio_4
+		&pinctrl_weim_gpio_5 &pinctrl_weim_gpio_6
+		&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1
+	>;
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	/* weim memory map: 32MB on CS0, CS1, CS2 and CS3 */
+	ranges = <0 0 0x08000000 0x02000000
+		  1 0 0x0a000000 0x02000000
+		  2 0 0x0c000000 0x02000000
+		  3 0 0x0e000000 0x02000000>;
+
+	/* SRAM on Colibri nEXT_CS0 */
+	sram@0,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <0 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+
+	/* SRAM on Colibri nEXT_CS1 */
+	sram@1,0 {
+		compatible = "cypress,cy7c1019dv33-10zsxi", "mtd-ram";
+		reg = <1 0 0x00010000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		fsl,weim-cs-timing = <0x00010081 0x00000000 0x04000000
+				      0x00000000 0x04000040 0x00000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
new file mode 100644
index 000000000000..3a6d3889760d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris-v2.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-iris.dts"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris V2 Board";
+	compatible = "toradex,colibri_imx6dl-iris-v2", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-name = "3v3_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio_iris	&pinctrl_usbh_oc_1 &pinctrl_usbc_id_1>;
+
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11	0x1b0b0
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cap-power-off-card;
+	/* uncomment the following to enable SD card UHS mode if you have a V1.1 module */
+	/* /delete-property/ no-1-8-v; */
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-colibri-iris.dts b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
new file mode 100644
index 000000000000..4303c88bb2a9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-iris.dts
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2022 Toradex
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6dl.dtsi"
+#include "imx6qdl-colibri.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S on Colibri Iris Board";
+	compatible = "toradex,colibri_imx6dl-iris", "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c3;
+	};
+
+	aliases {
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	status = "okay";
+};
+
+&gpio2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_forceoff &pinctrl_uart23_forceoff>;
+
+	/*
+	 * uart-a-on-x13-enable turns the UART transceiver for UART_A on. If one
+	 * wants to turn the transceiver off, that property has to be deleted
+	 * and the gpio handled in userspace.
+	 * The same applies to uart-b-c-on-x14-enable where the UART_B and
+	 * UART_C transceiver is turned on.
+	 */
+	uart-a-on-x13-enable-hog {
+		gpio-hog;
+		gpios = <4 GPIO_ACTIVE_HIGH>; /* SODIMM 102 */
+		output-high;
+	};
+
+	uart-b-c-on-x14-enable-hog {
+		gpio-hog;
+		gpios = <8 GPIO_ACTIVE_HIGH>; /* SODIMM 104 */
+		output-high;
+	};
+};
+
+/*
+ * Colibri I2C: I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	status = "okay";
+
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+		&pinctrl_gpio_iris
+		&pinctrl_usbh_oc_1
+		&pinctrl_usbc_id_1
+	>;
+
+	pinctrl_gpio_iris: gpioirisgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21	0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20	0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06	0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03	0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_forceoff: uart1forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart23_forceoff: uart23forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+		>;
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	status = "okay";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000000..2b2fc360b865
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
new file mode 100644
index 000000000000..e09c565d1d1f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-cubox-i-som-v15.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Solo/DualLite (1.5som)";
+	compatible = "solidrun,cubox-i/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-cubox-i.dts b/arch/arm/boot/dts/imx6dl-cubox-i.dts
index 2a43917d048e..2b1b3e193f53 100644
--- a/arch/arm/boot/dts/imx6dl-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6dl-cubox-i.dts
@@ -10,17 +10,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -29,11 +29,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -41,6 +41,8 @@
 /dts-v1/;
 
 #include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-cubox-i.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
index 994f96a3fb54..cece4aafdad8 100644
--- a/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/imx6dl-dfi-fs700-m60.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DTS_V1__
@@ -20,4 +14,10 @@
 / {
 	model = "DFI FS700-M60-6DL i.MX6dl Q7 Board";
 	compatible = "dfi,fs700-m60-6dl", "dfi,fs700e-m60", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts b/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
new file mode 100644
index 000000000000..038bb0025556
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-dhcom-picoitx.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6DL-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PicoITX PCB number: 487-600 or newer
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-picoitx.dtsi"
+
+/ {
+	model = "DH electronics i.MX6DL DHCOM on PicoITX";
+	compatible = "dh,imx6dl-dhcom-picoitx", "dh,imx6dl-dhcom-som",
+		     "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
new file mode 100644
index 000000000000..33825b5a8f26
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-eckelmann-ci4x10.dts
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016 Eckelmann AG.
+ * Copyright (C) 2013 Freescale Semiconductor, Inc.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Eckelmann CI 4X10 Board";
+	compatible = "eckelmann,imx6dl-ci4x10", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	rmii_clk: clock-rmii {
+		/* This clock is provided by the phy (KSZ8091RNB) */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usb_h1_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	siox {
+		compatible = "eckelmann,siox-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_siox>;
+		din-gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		dout-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		dclk-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		dld-gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&rmii_clk>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&rmii_clk>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "everspin,mr25h256";
+		reg = <0>;
+		spi-max-frequency = <15000000>;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <10000000>;
+	};
+};
+
+&gpio2 {
+	gpio-line-names = "buzzer", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names = "", "", "", "", "", "", "", "in2",
+			  "prio2", "prio1", "aux", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names = "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "in1",
+			  "", "", "", "", "", "", "", "",
+			  "", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	temperature-sensor@49 {
+		compatible = "ad,ad7414";
+		reg = <0x49>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf2127";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hog {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x00000018 /* buzzer */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x00000018 /* OUT_1 */
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x00000018 /* OUT_2 */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x00000018 /* OUT_3 */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x00000000 /* In1 */
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x00000000 /* In2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x00000018 /* unused watchdog pin */
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19		0x00000018 /* unused watchdog pin */
+
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 	0x000100a0
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI	0x000100a0
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO	0x000100a0
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25	0x000100a0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x000100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x000100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x000100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x000100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x0001b098
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x0001b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x0001b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x0001b0b0
+			MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0x00000018
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x0001b020
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x0001b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x0001b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* without SION i2c doesn't detect bus busy */
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b820
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b820
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x00000018
+		>;
+	};
+
+	pinctrl_reg_usb_h1_vbus: reg_usb_h1_vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x0001b0b0
+		>;
+	};
+
+	pinctrl_siox: sioxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x0001b010	/* DIN */
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x0001b010	/* DOUT */
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0001b010	/* DCLK */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x0001b010	/* DLD */
+		>;
+	};
+
+	pinctrl_uart1_dte: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x0001b010	/* DCD */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x0001b010	/* DTR */
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x0001b010
+			MX6QDL_PAD_EIM_D28__UART2_RTS_B 	0x0001b010
+			MX6QDL_PAD_EIM_D29__UART2_CTS_B 	0x0001b010
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x0001b010	/* DCD */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b010	/* DTR */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x0001b010	/* DSR */
+		>;
+	};
+
+	pinctrl_uart3_dce: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x0001b010
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x0001b010
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x0001b010
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x0001b010
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x0001b010	/* RTS */
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x00017059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x00010059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x00017059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x00017059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x00017059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x00017059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x00017059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x00017059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x00017059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x00017059
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	dcd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dce>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dce>;
+	rts-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dce>;
+	rts-gpios = <&gpio6 5 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-emcon-avari.dts b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
new file mode 100644
index 000000000000..407ad8d43c84
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX6 Solo/Dual-Lite Avari";
+	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts
index b2bd022fc6be..9956d12a1245 100644
--- a/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts
index a2e0b73fdd4a..9ea23dd54f3c 100644
--- a/arch/arm/boot/dts/imx6dl-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -17,3 +11,61 @@
 	model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX";
 	compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl";
 };
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts
index 6844b708d2f8..182e8194c249 100644
--- a/arch/arm/boot/dts/imx6dl-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -17,3 +11,61 @@
 	model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX";
 	compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl";
 };
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts
index be915412f852..a106c4e3e329 100644
--- a/arch/arm/boot/dts/imx6dl-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -17,3 +11,61 @@
 	model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX";
 	compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl";
 };
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi1_mux: endpoint {
+				remote-endpoint = <&ipu1_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi1: ipu1_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU1_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU1_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU1_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU1_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU1_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU1_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU1_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU1_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw552x.dts b/arch/arm/boot/dts/imx6dl-gw552x.dts
index a4b700cef188..4864a36f9b36 100644
--- a/arch/arm/boot/dts/imx6dl-gw552x.dts
+++ b/arch/arm/boot/dts/imx6dl-gw552x.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-gw553x.dts b/arch/arm/boot/dts/imx6dl-gw553x.dts
new file mode 100644
index 000000000000..59b8afc36e66
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW553X";
+	compatible = "gw,imx6dl-gw553x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw560x.dts b/arch/arm/boot/dts/imx6dl-gw560x.dts
new file mode 100644
index 000000000000..21bdfaf8df53
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw560x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW560X";
+	compatible = "gw,imx6dl-gw560x", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5903.dts b/arch/arm/boot/dts/imx6dl-gw5903.dts
new file mode 100644
index 000000000000..103261ea9334
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Duallite/Solo GW5903";
+	compatible = "gw,imx6dl-gw5903", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts
new file mode 100644
index 000000000000..9c6d3cd3d6a7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5904.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904";
+	compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5907.dts b/arch/arm/boot/dts/imx6dl-gw5907.dts
new file mode 100644
index 000000000000..3fa2822beffc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
+	compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5910.dts b/arch/arm/boot/dts/imx6dl-gw5910.dts
new file mode 100644
index 000000000000..0d5e7e5da536
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
+	compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5912.dts b/arch/arm/boot/dts/imx6dl-gw5912.dts
new file mode 100644
index 000000000000..5260e0142d63
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
+	compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-gw5913.dts b/arch/arm/boot/dts/imx6dl-gw5913.dts
new file mode 100644
index 000000000000..b74e533c8e67
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
+	compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000000..a63f742f20d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
new file mode 100644
index 000000000000..66a06cf3cdf3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard-som-v15.dts
@@ -0,0 +1,52 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard.dts b/arch/arm/boot/dts/imx6dl-hummingboard.dts
index d5c966031962..cbd02eb486e1 100644
--- a/arch/arm/boot/dts/imx6dl-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6dl-hummingboard.dts
@@ -11,17 +11,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -30,11 +30,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -42,6 +42,8 @@
 /dts-v1/;
 
 #include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-hummingboard.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000000..80313c13bcdb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,55 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
new file mode 100644
index 000000000000..e61ef1156f8b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard2-som-v15.dts
@@ -0,0 +1,54 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite (1.5som)";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-hummingboard2.dts b/arch/arm/boot/dts/imx6dl-hummingboard2.dts
new file mode 100644
index 000000000000..b12cd87f3f94
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-hummingboard2.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Solo/DualLite";
+	compatible = "solidrun,hummingboard2/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
new file mode 100644
index 000000000000..d8f3821a0ffd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2018 Engicam S.r.l.
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-icore-rqs.dts b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
new file mode 100644
index 000000000000..73d710d34b9d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore-rqs.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-icore.dts b/arch/arm/boot/dts/imx6dl-icore.dts
new file mode 100644
index 000000000000..80fa60607ab1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-icore.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 DualLite/Solo Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6dl";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..a864fdbd5f16
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-kontron-samx6i.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+
+/ {
+	model = "Kontron SMARC sAMX6i Dual-Lite/Solo";
+	compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts
new file mode 100644
index 000000000000..fa823988312d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts
@@ -0,0 +1,474 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Van der Laan LANMCU";
+	compatible = "vdl,lanmcu", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	clock_ksz8081: clock-ksz8081 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 1000>;
+		num-interpolated-steps = <20>;
+		default-brightness-level = <19>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0bdh6";
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clock_ksz8081>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clock_ksz8081>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "SD1_CD", "", "", "", "", "", "",
+		"DEBUG_0", "BL_PWM", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "ENET_LED_GREEN",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "TS_INT", "USB_OTG1_OC", "USB_OTG1_PWR", "",
+		"", "", "", "", "UART2_CTS", "", "UART3_CTS", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "ENET_RST", "ENET_INT",
+		"", "", "I2C1_SDA", "I2C1_SCL", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "WLAN_REG_ON", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"EMMC_RST", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts_edt>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <1792>;
+		touchscreen-size-y = <1024>;
+
+		touchscreen-fuzz-x = <0>;
+		touchscreen-fuzz-y = <0>;
+
+		/* Touch screen calibration */
+		threshold = <50>;
+		gain = <5>;
+		offset = <10>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x8
+		>;
+	};
+
+	pinctrl_ts_edt: ts1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B			0x130b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B			0x130b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__SD1_CD_B			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+
+	pinctrl_wifi_npd: wifigrp {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10		0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
new file mode 100644
index 000000000000..028951955bde
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -0,0 +1,496 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BTicino
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "BTicino i.MX6DL Mamoj board";
+	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 25000>; /* 25000ns -> 40kHz */
+		brightness-levels = <0 4 8 16 32 64 128 160 192 224 255>;
+		default-brightness-level = <7>;
+	};
+
+	display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "rocktech,rk070er9427";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_lcd_lr>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif_pwr>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_lcd_3v3: regulator-lcd-dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-dvdd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 1 0>;
+		enable-active-high;
+		startup-delay-us = <21000>;
+	};
+
+	reg_lcd_power: regulator-lcd-power {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-enable";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 6 0>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_3v3>;
+	};
+
+	reg_lcd_vgl: regulator-lcd-vgl {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgl";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_power>;
+	};
+
+	reg_lcd_vgh: regulator-lcd-vgh {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vgh";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_avdd>;
+	};
+
+	reg_lcd_vcom: regulator-lcd-vcom {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-vcom";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <11000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgh>;
+	};
+
+	reg_lcd_lr: regulator-lcd-lr {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vcom>;
+	};
+
+	reg_lcd_avdd: regulator-lcd-avdd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-avdd";
+		regulator-min-microvolt = <10280000>;
+		regulator-max-microvolt = <10280000>;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <6000>;
+		enable-active-high;
+		vin-supply = <&reg_lcd_vgl>;
+	};
+
+	reg_usb_host: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usbhost-vbus";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhost>;
+		regulator-min-microvolt = <50000000>;
+		regulator-max-microvolt = <50000000>;
+		gpio = <&gpio6 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wl18xx_vmmc:  regulator-wl18xx-vmcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio6 21 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			/* CPU vdd_arm core */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* SOC vdd_soc */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* I/O power GEN_3V3 */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* not used */
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			/* PMIC vsnvs. EX boot mode */
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* 1v8 general power */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 2v8 general power IMX6 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 3v3 Ethernet */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_host>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_19__ENET_TX_ER		0x1b0b0
+			MX6QDL_PAD_GPIO_18__ENET_RX_CLK		0x1b0b1
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3      0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_KEY_COL3__ENET_CRS		0x1b0b0
+			MX6QDL_PAD_KEY_ROW1__ENET_COL		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: pinctrlipu1lcdif { /* parallel port 24-bit */
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 /* VDOUT_PCLK */
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10 /* VDOUT_HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10 /* VDOUT_VSYNC */
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04	   0x10 /* VDOUT_RESET */
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_ipu1_lcdif_pwr: ipu1lcdifpwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x40013058 /* EN_LCD33V */
+			MX6QDL_PAD_SD4_DAT5__GPIO2_IO13		0x4001b0b0 /* EN_AVDD */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x40013058 /* ENVGH */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x40013058 /* ENVGL */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x40013058 /* LCD_POWER */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x40013058 /* EN_VCOM_LCD */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x40013058 /* LCD_L_R */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x40013058 /* LCD_U_D */
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhost: usbhostgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x4001b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17069
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10079
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17069
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17069
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17069
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17069
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_wlan: wlangrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21	0x4001b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-mba6.dtsi b/arch/arm/boot/dts/imx6dl-mba6.dtsi
new file mode 100644
index 000000000000..b749b424bbd6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <0>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <300>;
+	txd0-skew-ps = <120>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-mba6a.dts b/arch/arm/boot/dts/imx6dl-mba6a.dts
new file mode 100644
index 000000000000..df0a96b28af0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6a.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-a", "tq,mba6a",
+		     "tq,imx6dl-tqma6dl-a", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-mba6b.dts b/arch/arm/boot/dts/imx6dl-mba6b.dts
new file mode 100644
index 000000000000..610b19d2db0f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mba6b.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6dl-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6dl-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6S/DL on MBa6x";
+	compatible = "tq,imx6dl-mba6x-b", "tq,mba6b",
+		     "tq,imx6dl-tqma6dl-b", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
new file mode 100644
index 000000000000..61fa30991d67
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-nit6xlite.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board";
+	compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
index 5f4d33ccc4b3..ef58d3b0ea0d 100644
--- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts
@@ -1,14 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,6 +10,6 @@
 #include "imx6qdl-nitrogen6x.dtsi"
 
 / {
-	model = "Freescale i.MX6 DualLite Nitrogen6x Board";
-	compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl";
+	model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board";
+	compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl";
 };
diff --git a/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
new file mode 100644
index 000000000000..d906a7f05aaa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-phytec-mira-rdk-nand.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira DualLite/Solo Carrier-Board with NAND";
+	compatible = "phytec,imx6dl-pbac06-nand", "phytec,imx6dl-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&ethphy {
+	max-speed = <100>;
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
index 08e97801494e..0a07cc6f815e 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6dl-phytec-pbab01.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
index 964bc2ad3c5d..6f8aaf524425 100644
--- a/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx6dl.dtsi"
@@ -16,7 +10,8 @@
 	model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
 	compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x20000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-pico-dwarf.dts b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
new file mode 100644
index 000000000000..d85b15a8c127
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Dwarf baseboard";
+	compatible = "technexion,imx6dl-pico-dwarf", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-hobbit.dts b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
new file mode 100644
index 000000000000..08fedcbcc91b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Hobbit baseboard";
+	compatible = "technexion,imx6dl-pico-hobbit", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-nymph.dts b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
new file mode 100644
index 000000000000..32ccfc5d41ce
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and Nymph baseboard";
+	compatible = "technexion,imx6dl-pico-nymph", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pico-pi.dts b/arch/arm/boot/dts/imx6dl-pico-pi.dts
new file mode 100644
index 000000000000..4590e8ad9a91
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 DualLite/Solo Board and PI baseboard";
+	compatible = "technexion,imx6dl-pico-pi", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-pinfunc.h b/arch/arm/boot/dts/imx6dl-pinfunc.h
index 0ead323fdbd2..9d88d09f9bf6 100644
--- a/arch/arm/boot/dts/imx6dl-pinfunc.h
+++ b/arch/arm/boot/dts/imx6dl-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef __DTS_IMX6DL_PINFUNC_H
@@ -668,6 +664,7 @@
 #define MX6QDL_PAD_ENET_RX_ER__SPDIF_IN             0x1f4 0x5c4 0x8f0 0x3 0x1
 #define MX6QDL_PAD_ENET_RX_ER__ENET_1588_EVENT2_OUT 0x1f4 0x5c4 0x000 0x4 0x0
 #define MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24           0x1f4 0x5c4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1f8 0x5c8 0x000 0x0 0x0
 #define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1f8 0x5c8 0x818 0x1 0x0
 #define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1f8 0x5c8 0x838 0x2 0x0
 #define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1f8 0x5c8 0x000 0x3 0x0
diff --git a/arch/arm/boot/dts/imx6dl-plybas.dts b/arch/arm/boot/dts/imx6dl-plybas.dts
new file mode 100644
index 000000000000..e98046eea7a4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-plybas.dts
@@ -0,0 +1,396 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Plymovent BAS board";
+	compatible = "ply,plybas", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		button-start {
+			label = "START";
+			linux,code = <31>;
+			gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+		};
+
+		button-clean {
+			label = "CLEAN";
+			linux,code = <46>;
+			gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "debug1";
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "light_tower1";
+			gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-3 {
+			label = "light_tower2";
+			gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			label = "light_tower3";
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			label = "light_tower4";
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "SD1_CD", "", "", "", "", "", "",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "ECSPI1_SS1", "", "USB_EXT_PWR", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "CAN1_SR", "CAN2_SR", "", "",
+		"LED_DI0_DEBUG_0", "LED_DI0_DEBUG_1", "IMX6_IN12", "IMX6_HMI",
+			"IMX6_IN11", "IMX6_BUZZER", "IMX6_LED1", "IMX6_LED2",
+		"IMX6_LED3", "IMX6_LED4", "ETH_RESET", "IMX6_ANA_OUT_SD",
+			"IMX6_ANA_OUT_ERR", "IMX6_ANA_OUT", "ETH_INTRP", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "IMX6_RELAY1", "IMX6_RELAY2", "",
+		"IMX6_IN1", "IMX6_IN2", "IMX6_IN3", "IMX6_IN4", "IMX6_IN5",
+			"IMX6_IN6", "IMX6_IN7", "IMX6_IN8",
+		"IMX6_IN9", "IMX6_IN10", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-delay = <0 20>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			/* CAN2_SR */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			/* DEBUG_0 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+			/* DEBUG_1 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09			0x1b0b0
+
+			/* LED1 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22		0x13070
+			/* LED2 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23		0x13070
+			/* LED3 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24		0x13070
+			/* LED4 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25		0x13070
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B		0x130b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
new file mode 100644
index 000000000000..e3c10483f33b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Plymovent M2M board";
+	compatible = "ply,plym2m", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 1000>;
+		num-interpolated-steps = <20>;
+		default-brightness-level = <19>;
+		power-supply = <&reg_12v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0bdh6";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_5v0>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc2046>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@0 {
+			reg = <0>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@2 {
+			reg = <2>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		/* channel 6 is not connected */
+
+		channel@7 {
+			reg = <7>;
+			settling-time-us = <300>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "", "", "", "", "", "",
+		"DEBUG_0", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "ECSPI2_SS0", "", "", "", "TSC_BUSY", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "ECSPI1_SS1", "TSC_PENIRQ", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "CAN1_SR", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "ETH_RESET", "ETH_INTRP",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbphynop1 {
+	status = "disabled";
+};
+
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usbotg {
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x1b000
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x3008
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x3008
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x10000
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x3008
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x3008
+			/* CS */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x3008
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA			0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL			0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL			0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA			0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x8
+		>;
+	};
+
+	pinctrl_tsc2046: tsc2046grp {
+		fsl,pins = <
+			/* TSC_PENIRQ */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x1b0b1
+			/* TSC_BUSY */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-prtmvt.dts b/arch/arm/boot/dts/imx6dl-prtmvt.dts
new file mode 100644
index 000000000000..5f4fa796ca18
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtmvt.dts
@@ -0,0 +1,851 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/media/tvp5150.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+#include "imx6dl.dtsi"
+
+/ {
+	model = "Protonic MVT board";
+	compatible = "prt,prtmvt", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000 0>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <1>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		key-cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		key-esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		key-up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		key-down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		key-ok {
+			label = "GPIO Key OK";
+			linux,code = <KEY_OK>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-0 {
+			label = "debug0";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "debug1";
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-2 {
+			label = "power_led";
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg070wvlq", "lg,lb070wv8";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&codec>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR	IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0				IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>, <&clk50m_phy>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <3000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"REV_ID0", "REV_ID1", "REV_ID2", "REV_ID3", "REV_ID4",
+			"BOARD_ID0", "BOARD_ID1", "BOARD_ID2",
+		"", "", "", "", "", "", "", "ON_SWITCH",
+		"POWER_LED", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"ECSPI1_SCLK", "ECSPI1_MISO", "ECSPI1_MOSI", "ECSPI1_SS1",
+			"CPU_ON1_FB", "USB_EXT1_OC", "USB_EXT1_PWR", "YACO_IRQ",
+		"TSS_TXD", "TSS_RXD", "", "", "", "", "YACO_BOOT0",
+			"YACO_RESET";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "CAN1_SR", "CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "", "", "", "",
+		"CPU_LIGHT_ON", "", "ETH_RESET", "", "BL_EN",
+			"BL_PWM", "ETH_INTRP", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9539>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	/* additional i2c devices are added automatically by the boot loader */
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_h1_vbus>;
+	pinctrl-names = "default";
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	cap-sd-highspeed;
+	no-mmc;
+	no-sdio;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1			0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28		0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x3008
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12			0x13008
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00			0x1b088
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			/* CAN2_SR */
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02			0x1b0b0
+			/* CAM1_MIRROR */
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03			0x130b0
+			/* CAM2_MIRROR */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04			0x130b0
+			/* CAM_nDETECT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b0
+			/* ISB_IN1 */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x130b0
+			/* ISB_nIN2 */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21			0x1b0b0
+			/* WARN_LIGHT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19			0x100b0
+			/* ON2_FB */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b0
+			/* YACO_nIRQ */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x1b0b0
+			/* YACO_BOOT0 */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0x130b0
+			/* YACO_nRESET */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x1b0b0
+			/* FORCE_ON1 */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30			0x1b0b0
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21		0x1f0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b0b0
+
+			/* HW revision detect */
+			/* REV_ID0 */
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x1b0b0
+			/* REV_ID1 */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09			0x1b0b0
+			/* REV_ID2 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10			0x1b0b0
+			/* REV_ID3 */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11			0x1b0b0
+			/* REV_ID4 */
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12			0x1b0b0
+
+			/* New in HW revision 1 */
+			/* ON1_FB */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20			0x100b0
+			/* DIP1_FB */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18			0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			/* DEBUG0 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16		0x1b0b0
+			/* DEBUG1 */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17		0x1b0b0
+			/* POWER_LED */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24			0x1b0b0
+		>;
+	};
+
+	pinctrl_pca9539: pca9539 {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT			0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA		0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	/* YaCO Touchscreen UART */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC			0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01			0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-prtrvt.dts b/arch/arm/boot/dts/imx6dl-prtrvt.dts
new file mode 100644
index 000000000000..56bb1ca56a2d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtrvt.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic RVT board";
+	compatible = "prt,prtrvt", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <2000000>;
+		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
+		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
+				  <&gpio5 11 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_3v3>;
+		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* nc */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			/* NFC_ASK_OOK */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
+			/* NFC_PWR_EN */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
+			/* NFC_EN2 */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
+			/* NFC_EN */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			/* NFC_MOD */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			/* NFC_IRQ */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-prtvt7.dts b/arch/arm/boot/dts/imx6dl-prtvt7.dts
new file mode 100644
index 000000000000..a1eb53851794
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-prtvt7.dts
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/display/sdtv-standards.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic VT7";
+	compatible = "prt,prtvt7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 0>;
+		brightness-levels = <0 20 81 248 1000>;
+		default-brightness-level = <20>;
+		num-interpolated-steps = <21>;
+		power-supply = <&reg_bl_12v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		pinctrl-names = "default";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		key-up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		key-down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		key-enter {
+			label = "GPIO Key Enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		key-cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		key-f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "innolux,g070y2-t02";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	connector {
+		compatible = "composite-video-connector";
+		label = "Composite0";
+		sdtv-standards = <SDTV_STD_PAL_B>;
+
+		port {
+			comp0_out: endpoint {
+				remote-endpoint = <&tvp5150_comp0_in>;
+			};
+		};
+	};
+
+	reg_bl_12v0: regulator-bl-12v0 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_bl_12v0>;
+		regulator-name = "bl-12v0";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_tsc>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+
+	video@5c {
+		compatible = "ti,tvp5150";
+		reg = <0x5c>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			tvp5150_comp0_in: endpoint {
+				remote-endpoint = <&comp0_out>;
+			};
+		};
+
+		/* Output port 2 is video output pad */
+		port@2 {
+			reg = <2>;
+
+			tvp5151_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tsens0: temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+		#thermal-sensor-cells = <0>;
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&ipu1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tvp5151_to_ipu1_csi0_mux>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
+
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_bl_12v0: 12blgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
new file mode 100644
index 000000000000..150d69858255
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-qmx6.dtsi
@@ -0,0 +1,612 @@
+// SPDX-License-Identifier: GPL-2.0 or MIT
+//
+// Device Tree Source for i.MX6DL based congatec QMX6
+// System on Module
+//
+// Copyright 2018-2021 General Electric Company
+// Copyright 2018-2021 Collabora
+// Copyright 2016 congatec AG
+
+#include "imx6dl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+
+		i2c5: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c6: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT6) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT6)
+		>;
+	};
+
+	audmux_aud6 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT6>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&clks {
+	clocks = <&rtc_sqw>;
+	clock-names = "ckil";
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0000000 0x100000>;
+		};
+
+		partition@100000 {
+			label = "user";
+			reg = <0x0100000 0x2fc000>;
+		};
+
+		partition@3fc000 {
+			label = "reserved";
+			reg = <0x03fc000 0x4000>;
+			read-only;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	fsl,magic-packet;
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@6 {
+			reg = <6>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	rtc: m41t62@68 {
+		compatible = "st,m41t62";
+		reg = <0x68>;
+
+		rtc_sqw: clock {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32768>;
+		};
+	};
+};
+
+&i2c6 {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * keep VGEN3, VGEN4 and VGEN5 enabled in order to
+			 * maintain backward compatibility with hw-rev. A.0
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* supply voltage for eMMC */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&pcie {
+	reset-gpio = <&gpio1 20 0>;
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usbh1 {
+	/* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+&usdhc2 {
+	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	qmx6mux: imx6qdl-qmx6 {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x110b0 /* Q7[67] HDA_SDO */
+				MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x30b0 /* Q7[59] HDA_SYNC */
+				MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x30b0 /* Q7[65] HDA_SDI */
+				MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x30b0 /* Q7[63] HDA_BITCLK */
+			>;
+		};
+
+		/* PHY is on System on Module, Q7[3-15] have Ethernet lines */
+		pinctrl_enet: enet {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			>;
+		};
+
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x80000000 /* PCIE_WAKE_B */
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x80000000 /* I2C multiplexer */
+				MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x80000000 /* SD4_CD# */
+				MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x80000000 /* SD4_WP */
+				MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x80000000 /* Camera MCLK */
+			>;
+		};
+
+		pinctrl_i2c1: i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1 /* Q7[66] I2C_CLK */
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1 /* Q7[68] I2C_DAT */
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x1b0b0 /* Q7[66] I2C_CLK */
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b0 /* Q7[68] I2C_DAT */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1 /* Q7[152] SDVO_CTRL_CLK */
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1 /* Q7[150] SDVO_CTRL_DAT */
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0 /* Q7[152] SDVO_CTRL_CLK */
+				MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x1b0b0 /* Q7[150] SDVO_CTRL_DAT */
+			>;
+		};
+
+		pinctrl_i2c3: i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1 /* Q7[60] SMB_CLK */
+				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1 /* Q7[62] SMB_DAT */
+			>;
+		};
+
+		pinctrl_i2c3_gpio: i2c3-gpio {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x1b0b0 /* Q7[60] SMB_CLK */
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b0 /* Q7[62] SMB_DAT */
+			>;
+		};
+
+		pinctrl_phy_reset: phy-reset {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0 /* RGMII Phy Reset */
+			>;
+		};
+
+		pinctrl_pwm4: pwm4 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1 /* Q7[123] LVDS_BLT_CTRL */
+			>;
+		};
+
+		pinctrl_q7_backlight_enable: q7-backlight-enable {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0 /* Q7[112] LVDS_BLEN */
+			>;
+		};
+
+		pinctrl_q7_gpio0: q7-gpio0 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0 /* Q7[185] GPIO0 */
+			>;
+		};
+
+		pinctrl_q7_gpio1: q7-gpio1 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0 /* Q7[186] GPIO1 */
+			>;
+		};
+
+		pinctrl_q7_gpio2: q7-gpio2 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0 /* Q7[187] GPIO2 */
+			>;
+		};
+
+		pinctrl_q7_gpio3: q7-gpio3 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b0 /* Q7[188] GPIO3 */
+			>;
+		};
+
+		pinctrl_q7_gpio4: q7-gpio4 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* Q7[189] GPIO4 */
+			>;
+		};
+
+		pinctrl_q7_gpio5: q7-gpio5 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* Q7[190] GPIO5 */
+			>;
+		};
+
+		pinctrl_q7_gpio6: q7-gpio6 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0 /* Q7[191] GPIO6 */
+			>;
+		};
+
+		pinctrl_q7_gpio7: q7-gpio7 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* Q7[192] GPIO7 */
+			>;
+		};
+
+		pinctrl_q7_hda_reset: q7-hda-reset {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0 /* Q7[61] HDA_RST_N */
+			>;
+		};
+
+		pinctrl_q7_lcd_power: lcd-power {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0 /* Q7[111] LVDS_PPEN */
+			>;
+		};
+
+		pinctrl_q7_sdio_power: q7-sdio-power {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0 /* Q7[47] SDIO_PWR# */
+			>;
+		};
+
+		pinctrl_q7_sleep_button: q7-sleep-button {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0 /* Q7[21] SLP_BTN# */
+			>;
+		};
+
+		pinctrl_q7_spi_cs1: spi-cs1 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b0 /* Q7[202] SPI_CS1# */
+			>;
+		};
+
+		/* SPI1 bus does not leave System on Module */
+		pinctrl_spi1: spi1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			>;
+		};
+
+		/* Debug connector on Q7 module */
+		pinctrl_uart2: uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1 /* Q7[177] UART0_RX */
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1 /* Q7[171] UART0_TX */
+			>;
+		};
+
+		pinctrl_usbotg: usbotg {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059 /* Q7[92] USB_ID */
+			>;
+		};
+
+		/* µSD card slot on Q7 module */
+		pinctrl_usdhc2: usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0 /* SD2_CD */
+			>;
+		};
+
+		/* eMMC module on Q7 module */
+		pinctrl_usdhc3: usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059 /* Q7[45] SDIO_CMD */
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x17059 /* Q7[42] SDIO_CLK */
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059 /* Q7[48] SDIO_DAT1 */
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059 /* Q7[49] SDIO_DAT0 */
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059 /* Q7[50] SDIO_DAT3 */
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059 /* Q7[51] SDIO_DAT2 */
+			>;
+		};
+
+		pinctrl_wdog: wdog {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0 /* Watchdog output signal */
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index b13845c2823b..b72f8ea1e6f6 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2014 FEDEVEL, Inc.
  *
  * Author: Robert Nelson <robertcnelson@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
@@ -16,14 +12,15 @@
 	model = "Rex Basic i.MX6 Dual Lite Board";
 	compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x20000000>;
 	};
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index 43cb3fd76be7..24c7f535f63b 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2014 Iain Paton <ipaton0@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 /dts-v1/;
@@ -15,40 +11,13 @@
 	model = "RIoTboard i.MX6S";
 	compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
-
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
-
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-		};
+	chosen {
+		stdout-path = "serial1:115200n8";
 	};
 
 	leds {
@@ -56,14 +25,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -82,6 +51,28 @@
 			mux-int-port = <1>;
 			mux-ext-port = <3>;
 	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &audmux {
@@ -90,14 +81,81 @@
 	status = "okay";
 };
 
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio3 31 0>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+			qca,smarteee-tw-us-1g = <24>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
+			"I2C3_SDA", "I2C4_SCL",
+		"I2C4_SDA", "", "", "", "", "", "", "",
+		"", "PWM3", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "USB_OTG_VBUS", "",
+		"UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
+		"GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
+			"CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
+		"CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
+			"CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
+			"GPIO5_07",
+		"GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
+			"CSPI2_CS0", "CSPI2_CLK", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"SD3_CD", "SD3_WP", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
 };
 
 &hdmi {
@@ -111,19 +169,20 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	pmic: pf0100@08 {
+	pmic: pf0100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <16 8>;
+		fsl,pmic-stby-poweroff;
 
 		regulators {
 			reg_vddcore: sw1ab {				/* VDDARM_IN */
@@ -305,8 +364,8 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -314,8 +373,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -375,21 +434,21 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1		/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0		/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0		/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x130b0		/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0		/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0		/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030		/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030		/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030		/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030		/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030		/* AR8035 pin strapping: MODE#3: pull up */
 				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0		/* AR8035 pin strapping: MODE#0: pull down */
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8	/* GPIO16 -> AR8035 25MHz */
-			        MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0		/* RGMII_nRST */
 				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0		/* AR8035 interrupt */
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
diff --git a/arch/arm/boot/dts/imx6dl-sabreauto.dts b/arch/arm/boot/dts/imx6dl-sabreauto.dts
index a6ce7b487ad7..ff3283c83a39 100644
--- a/arch/arm/boot/dts/imx6dl-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6dl-sabreauto.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
 
 /dts-v1/;
 
@@ -15,3 +11,18 @@
 	model = "Freescale i.MX6 DualLite/Solo SABRE Automotive Board";
 	compatible = "fsl,imx6dl-sabreauto", "fsl,imx6dl";
 };
+
+&cpu0 {
+	operating-points = <
+		/* kHz    uV */
+		996000  1275000
+		792000  1175000
+		396000  1150000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz  SOC-PU uV */
+		996000	1200000
+		792000	1175000
+		396000	1175000
+	>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts
index 2de04479dc35..33040761b253 100644
--- a/arch/arm/boot/dts/imx6dl-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts
@@ -2,12 +2,42 @@
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
@@ -18,3 +48,8 @@
 	model = "Freescale i.MX6 DualLite SABRE Lite Board";
 	compatible = "fsl,imx6dl-sabrelite", "fsl,imx6dl";
 };
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-sabresd.dts b/arch/arm/boot/dts/imx6dl-sabresd.dts
index 1e45f2f9d0b6..cd6bbf22a16f 100644
--- a/arch/arm/boot/dts/imx6dl-sabresd.dts
+++ b/arch/arm/boot/dts/imx6dl-sabresd.dts
@@ -1,10 +1,6 @@
-/*
- * Copyright (C) 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2013 Freescale Semiconductor, Inc.
 
 /dts-v1/;
 
@@ -15,3 +11,8 @@
 	model = "Freescale i.MX6 DualLite SABRE Smart Device Board";
 	compatible = "fsl,imx6dl-sabresd", "fsl,imx6dl";
 };
+
+&ipu1_csi1_from_ipu1_csi1_mux {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-savageboard.dts b/arch/arm/boot/dts/imx6dl-savageboard.dts
new file mode 100644
index 000000000000..b95469c520a4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-savageboard.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+	model = "Poslab SavageBoard Dual";
+	compatible = "poslab,imx6dl-savageboard", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
new file mode 100644
index 000000000000..b12b5aabe70a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt2", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
new file mode 100644
index 000000000000..5dcc433fe2af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU SoloCore";
+	compatible = "skov,imx6dl-skov-revc-lt6", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-solidsense.dts b/arch/arm/boot/dts/imx6dl-solidsense.dts
new file mode 100644
index 000000000000..2a3699adbed0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Solo/DualLite (1.5som+emmc)";
+	compatible = "solidrun,solidsense/dl", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tqma6a.dtsi b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
new file mode 100644
index 000000000000..e891ef9b0091
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tqma6b.dtsi b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
new file mode 100644
index 000000000000..38cd8501a886
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tqma6b.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6dl.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-ts4900.dts b/arch/arm/boot/dts/imx6dl-ts4900.dts
new file mode 100644
index 000000000000..3d60cc725d9e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-ts4900.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts4900", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-ts7970.dts b/arch/arm/boot/dts/imx6dl-ts7970.dts
new file mode 100644
index 000000000000..5da6feba2e66
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-ts7970.dts
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-ts7970.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Solo/DualLite TS-7970 (Default Device Tree)";
+	compatible = "technologic,imx6dl-ts7970", "fsl,imx6dl";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
index 913bb9a0466a..51a9bb9d6bc2 100644
--- a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
@@ -1,81 +1,57 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
 
 / {
 	model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
 	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
 
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-        };
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
 };
 
 &can1 {
@@ -86,14 +62,14 @@
 	xceiver-supply = <&reg_3v3>;
 };
 
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
 &kpp {
 	status = "disabled";
 };
 
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
 &reg_can_xcvr {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
new file mode 100644
index 000000000000..fc23b4d291a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8034.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8034.dts b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
new file mode 100644
index 000000000000..9eb2ef17339c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8034.dts
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8034 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&pinctrl_usdhc1 {
+	fsl,pins = <
+		MX6QDL_PAD_SD1_CMD__SD1_CMD		0x070b1
+		MX6QDL_PAD_SD1_CLK__SD1_CLK		0x070b1
+		MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x070b1
+		MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x070b1
+		MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x070b1
+		MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x070b1
+		MX6QDL_PAD_SD3_CMD__GPIO7_IO02		0x170b0 /* SD1 CD */
+	>;
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
new file mode 100644
index 000000000000..4101c6597721
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6s-8035.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6s-8035.dts b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
new file mode 100644
index 000000000000..a5532ecc18c5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6s-8035.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6S-8035 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+
+	cpus {
+		/delete-node/ cpu@1;
+	};
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
index 5fe465c2814e..67ed0452f5de 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts
@@ -1,177 +1,50 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
 
 / {
 	model = "Ka-Ro electronics TX6U-801x Module";
 	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-        };
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
 };
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
new file mode 100644
index 000000000000..d34189fc52d9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-8033.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-8033.dts b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
new file mode 100644
index 000000000000..7030b2654bbd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-8033.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8033 Module";
+	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
new file mode 100644
index 000000000000..aef5fcc42904
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-801x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
index c275eecc9472..5342f2f5a8a8 100644
--- a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
+++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts
@@ -1,150 +1,50 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
 
 / {
 	model = "Ka-Ro electronics TX6U-811x Module";
 	compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&i2c3 {
-	polytouch2: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
-	};
-};
-
-&iomuxc {
-	imx6dl-tx6u-811x {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
-};
-
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "disabled";
-
-		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
new file mode 100644
index 000000000000..c4588fb0bf6f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6dl-tx6u-811x.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6dl-udoo.dts b/arch/arm/boot/dts/imx6dl-udoo.dts
index e3713f00e819..d871cac1711f 100644
--- a/arch/arm/boot/dts/imx6dl-udoo.dts
+++ b/arch/arm/boot/dts/imx6dl-udoo.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/imx6dl-victgo.dts b/arch/arm/boot/dts/imx6dl-victgo.dts
new file mode 100644
index 000000000000..23274be08e61
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-victgo.dts
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ * Copyright (c) 2020 Oleksij Rempel <kernel@pengutronix.de>, Pengutronix
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Kverneland TGO";
+	compatible = "kvg,victgo", "fsl,imx6dl";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiokeys>;
+		autorepeat;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		key-enter {
+			label = "Rotary Key";
+			gpios = <&gpio2 05 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_ENTER>;
+			wakeup-source;
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&vdiv_vaccu>, <&vdiv_hitch_pos>;
+	};
+
+	panel {
+		compatible = "lg,lb070wv8";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-0 = <&pinctrl_rotary_ch>;
+		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>,
+			<&gpio2 4 GPIO_ACTIVE_HIGH>;
+		linux,axis = <REL_WHEEL>;
+		rotary-encoder,steps-per-period = <4>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,rollover;
+		wakeup-source;
+	};
+
+	thermal-zones {
+		chassis-thermal {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&tsens0>;
+		};
+
+		touch-thermal0 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp0>;
+		};
+
+		touch-thermal1 {
+			polling-delay = <20000>;
+			polling-delay-passive = <0>;
+			thermal-sensors = <&touch_temp1>;
+		};
+	};
+
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>,
+                              <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <64687>;
+		touchscreen-inverted-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+
+	touch_temp0: touch-temperature-sensor0 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 0>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 736
+						85000 474>;
+	};
+
+	touch_temp1: touch-temperature-sensor1 {
+		compatible = "generic-adc-thermal";
+		#thermal-sensor-cells = <0>;
+		io-channels = <&adc_ts 7>;
+		io-channel-names = "sensor-channel";
+		temperature-lookup-table = <    (-40000) 826
+						85000 609>;
+	};
+
+	vdiv_vaccu: voltage-divider-vaccu {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 2>;
+		output-ohms = <2500>;
+		full-ohms = <64000>;
+		#io-channel-cells = <0>;
+	};
+
+	vdiv_hitch_pos: voltage-divider-hitch-pos {
+		compatible = "voltage-divider";
+		io-channels = <&adc_ts 6>;
+		output-ohms = <3300>;
+		full-ohms = <13300>;
+		#io-channel-cells = <0>;
+	};
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		pinctrl-names = "default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-handle = <&rmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"CAN1_TERM", "SD1_CD", "ITU656_RESET", "CAM1_MIRROR",
+			"CAM2_MIRROR", "", "", "SMBALERT",
+		"DEBUG_0", "DEBUG_1", "", "", "", "", "", "",
+		"SD1_DATA0", "SD1_DATA1", "SD1_CMD", "SD1_DATA2", "SD1_CLK",
+			"SD1_DATA3", "ETH_MDIO", "",
+		"", "", "", "", "", "", "", "ETH_MDC";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
+		"UART5_TXD", "UART5_RXD", "CAN1_TX", "CAN1_RX", "CAN1_SR",
+			"CAN2_SR", "CAN2_TX", "CAN2_RX",
+		"", "", "DIP1_FB", "", "VCAM_EN", "ON1_CTRL", "ON2_CTRL",
+			"HITCH_IN_OUT",
+		"LIGHT_ON", "", "ETH_RESET", "CONTACT_IN", "BL_EN",
+			"BL_PWM", "ETH_INT", "ISB_LED";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"TSC_PENIRQ", "TSC_BUSY", "ECSPI2_MOSI", "ECSPI2_MISO",
+			"ECSPI2_SS0", "ECSPI2_SCLK", "", "",
+		"", "", "ITU656_CLK", "I2S_MCLK", "ITU656_PDN", "AUDIO_RESET",
+			"I2S_BITCLK", "I2S_DOUT",
+		"I2S_LRCLK", "I2S_DIN", "I2C1_SDA", "I2C1_SCL", "YACO_AUX_RX",
+			"YACO_AUX_TX", "ITU656_D0", "ITU656_D1";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"ITU656_D2", "ITU656_D3", "ITU656_D4", "ITU656_D5",
+			"ITU656_D6", "ITU656_D7", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	keypad@70 {
+		compatible = "holtek,ht16k33";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x70>;
+		refresh-rate-hz = <20>;
+		debounce-delay-ms = <50>;
+		interrupts-extended = <&gpio4 5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		keypad,num-rows = <12>;
+		keypad,num-columns = <3>;
+		linux,keymap = <
+			MATRIX_KEY(2, 0, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F8)
+			MATRIX_KEY(4, 0, KEY_F10)
+			MATRIX_KEY(5, 0, KEY_F4)
+			MATRIX_KEY(6, 0, KEY_F2)
+			MATRIX_KEY(2, 1, KEY_F5)
+			MATRIX_KEY(3, 1, KEY_F7)
+			MATRIX_KEY(4, 1, KEY_F9)
+			MATRIX_KEY(5, 1, KEY_F3)
+			MATRIX_KEY(6, 1, KEY_F1)
+		      >;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12		0x100b1
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK		0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER		0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26		0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpiokeys: gpiokeygrp {
+		fsl,pins = <
+			/* ROTARY_BTN */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x1b0b0
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23			0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05			0x1b0b0
+		>;
+	};
+
+	pinctrl_rotary_ch: rotarychgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x1b0b0
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08		0x1b0b0
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-vicut1.dts b/arch/arm/boot/dts/imx6dl-vicut1.dts
new file mode 100644
index 000000000000..5035d303447d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-vicut1.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
+
+/ {
+	model = "Kverneland UT1 Board";
+	compatible = "kvg,vicut1", "fsl,imx6dl";
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
index f607d4f1d244..c2946fbaa0dd 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts
@@ -1,22 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
 #include "imx6qdl-wandboard-revb1.dtsi"
 
 / {
-	model = "Wandboard i.MX6 Dual Lite Board";
+	model = "Wandboard i.MX6 Dual Lite Board rev B1";
 	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
new file mode 100644
index 000000000000..6d1d863c2e3a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-wandboard-revd1.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6dl.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Dual Lite Board revD1";
+	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts
index bbb616723097..4a08d5a99452 100644
--- a/arch/arm/boot/dts/imx6dl-wandboard.dts
+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
@@ -16,7 +12,8 @@
 	model = "Wandboard i.MX6 Dual Lite Board";
 	compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
new file mode 100644
index 000000000000..3be38a3c4bb1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy_port2: phy@1 {
+			reg = <1>;
+		};
+
+		phy_port3: phy@2 {
+			reg = <2>;
+		};
+
+		switch@10 {
+			compatible = "qca,qca8334";
+			reg = <10>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@2 {
+					reg = <2>;
+					label = "eth2";
+					phy-handle = <&phy_port2>;
+				};
+
+				eth1: port@3 {
+					reg = <3>;
+					label = "eth1";
+					phy-handle = <&phy_port3>;
+				};
+			};
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "disabled";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		led@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1b898
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b098
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b098
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b098
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x1b098
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b018
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b018
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "disabled";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&sw2_reg>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-draco.dts b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
new file mode 100644
index 000000000000..a38c407fd837
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-draco.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Draco i.MX6Solo board";
+	compatible = "ysoft,imx6dl-yapp4-draco", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
new file mode 100644
index 000000000000..a19609c7c7c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-hydra.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Hydra i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-hydra", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&reg_pcie {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
new file mode 100644
index 000000000000..5c2cd517589b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-lynx.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Lynx i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-lynx", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-orion.dts b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
new file mode 100644
index 000000000000..884b236746bb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-orion.dts
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2020 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Orion i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-orion", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
new file mode 100644
index 000000000000..e0292f11d03e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-phoenix.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Phoenix i.MX6DualLite board";
+	compatible = "ysoft,imx6dl-yapp4-phoenix", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&gpio_keys {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@2;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
new file mode 100644
index 000000000000..f6ae24efd4aa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp4-ursa.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2015-2018 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Ursa i.MX6Solo board";
+	compatible = "ysoft,imx6dl-yapp4-ursa", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+};
+
+&aliases {
+	/delete-property/ ethernet1;
+};
+
+&backlight {
+	status = "okay";
+};
+
+&lcd_display {
+	status = "okay";
+};
+
+&panel {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&switch_ports {
+	/delete-node/ port@3;
+};
+
+&touchscreen {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
new file mode 100644
index 000000000000..52a0f6ee426f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-yapp43-common.dtsi
@@ -0,0 +1,615 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases: aliases {
+		ethernet1 = &eth1;
+		ethernet2 = &eth2;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 32 64 128 255>;
+		default-brightness-level = <32>;
+		num-interpolated-steps = <8>;
+		power-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		button {
+			label = "Factory RESET";
+			linux,code = <BTN_0>;
+			gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel: panel {
+		compatible = "dataimage,scf0700c48ggu18";
+		power-supply = <&sw2_reg>;
+		backlight = <&backlight>;
+		enable-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		status = "disabled";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&sw2_reg>;
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethphy0: port@0 {
+					reg = <0>;
+					label = "cpu";
+					phy-mode = "rgmii-id";
+					ethernet = <&fec>;
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+
+				eth2: port@1 {
+					reg = <1>;
+					label = "eth2";
+					phy-handle = <&phy_port1>;
+				};
+
+				eth1: port@2 {
+					reg = <2>;
+					label = "eth1";
+					phy-handle = <&phy_port2>;
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				phy_port1: switchphy@11 {
+					reg = <0x11>;
+				};
+
+				phy_port2: switchphy@12 {
+					reg = <0x12>;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic@8 {
+		compatible = "fsl,pfuze200";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x8>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vsnvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	leds: led-controller@30 {
+		compatible = "ti,lp5562";
+		reg = <0x30>;
+		clock-mode = /bits/ 8 <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		led@0 {
+			chan-name = "R";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@1 {
+			chan-name = "G";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@2 {
+			chan-name = "B";
+			led-cur = /bits/ 8 <0x20>;
+			max-cur = /bits/ 8 <0x60>;
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+
+	eeprom@57 {
+		compatible = "atmel,24c128";
+		reg = <0x57>;
+		pagesize = <64>;
+	};
+
+	touchscreen: touchscreen@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		reg = <0x5c>;
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+		attb-gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		status = "disabled";
+	};
+
+	rtc: rtc@68 {
+		compatible = "dallas,ds1341";
+		reg = <0x68>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "disabled";
+
+	oled_1309: oled@3c {
+		compatible = "solomon,ssd1309fb-i2c";
+		reg = <0x3c>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,segment-no-remap;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	oled_1305: oled@3d {
+		compatible = "solomon,ssd1305fb-i2c";
+		reg = <0x3d>;
+		solomon,height = <64>;
+		solomon,width = <128>;
+		solomon,page-offset = <0>;
+		solomon,col-offset = <4>;
+		solomon,prechargep2 = <15>;
+		reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
+		vbat-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	gpio_oled: gpio@41 {
+		compatible = "nxp,pca9536";
+		gpio-controller;
+		#gpio-cells = <2>;
+		reg = <0x41>;
+		vcc-supply = <&sw2_reg>;
+		status = "disabled";
+	};
+
+	touchkeys: keys@5a {
+		compatible = "fsl,mpr121-touchkey";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchkeys>;
+		reg = <0x5a>;
+		vdd-supply = <&sw2_reg>;
+		autorepeat;
+		linux,keycodes = <KEY_1>, <KEY_2>, <KEY_3>, <KEY_4>, <KEY_5>,
+				<KEY_6>, <KEY_7>, <KEY_8>, <KEY_9>,
+				<KEY_BACKSPACE>, <KEY_0>, <KEY_ENTER>;
+		poll-interval = <50>;
+		status = "disabled";
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b020
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b020
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b020
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b020
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b020
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b020
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b020
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b020
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b020
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b020
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b020
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b020
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b020
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b010
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b010
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b098
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b899
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b899
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07                  0x1b0b0
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b098
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x8
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b098
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x1b098
+		>;
+	};
+
+	pinctrl_touchkeys: touchkeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b098
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b098
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0a8
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0a8
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x98
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1b098
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b098
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotg-vbus {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x98
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x1f069
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x10069
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17069
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17069
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17069
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17069
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17069
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17069
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17069
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17069
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "disabled";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	over-current-active-low;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <106>;
+	status = "okay";
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <109>;
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	vmmc-supply = <&sw2_reg>;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 4b0ec0703825..dc919e09a505 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6dl-pinfunc.h"
@@ -21,7 +15,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
@@ -30,7 +24,7 @@
 				/* kHz    uV */
 				996000  1250000
 				792000  1175000
-				396000  1075000
+				396000  1150000
 			>;
 			fsl,soc-operating-points = <
 				/* ARM kHz  SOC-PU uV */
@@ -39,6 +33,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -49,6 +44,8 @@
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		cpu@1 {
@@ -56,39 +53,57 @@
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				996000  1250000
+				792000  1175000
+				396000  1150000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				996000	1175000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
-	soc {
-		ocram: sram@00900000 {
+	soc: soc {
+		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x20000>;
+			ranges = <0 0x00900000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips1: aips-bus@02000000 {
-			iomuxc: iomuxc@020e0000 {
-				compatible = "fsl,imx6dl-iomuxc";
-			};
-
-			pxp: pxp@020f0000 {
+		aips1: bus@2000000 {
+			pxp: pxp@20f0000 {
 				reg = <0x020f0000 0x4000>;
 				interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			epdc: epdc@020f4000 {
+			epdc: epdc@20f4000 {
 				reg = <0x020f4000 0x4000>;
 				interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
 			};
-
-			lcdif: lcdif@020f8000 {
-				reg = <0x020f8000 0x4000>;
-				interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-			};
 		};
 
-		aips2: aips-bus@02100000 {
-			i2c4: i2c@021f8000 {
+		aips2: bus@2100000 {
+			i2c4: i2c@21f8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -100,20 +115,198 @@
 		};
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>;
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 131 2>, <&iomuxc  2 137 8>, <&iomuxc 10 189 2>,
+		      <&iomuxc 12 194 1>, <&iomuxc 13 193 1>, <&iomuxc 14 192 1>,
+		      <&iomuxc 15 191 1>, <&iomuxc 16 185 2>, <&iomuxc 18 184 1>,
+		      <&iomuxc 19 187 1>, <&iomuxc 20 183 1>, <&iomuxc 21 188 1>,
+		      <&iomuxc 22 123 3>, <&iomuxc 25 121 1>, <&iomuxc 26 127 1>,
+		      <&iomuxc 27 126 1>, <&iomuxc 28 128 1>, <&iomuxc 29 130 1>,
+		      <&iomuxc 30 129 1>, <&iomuxc 31 122 1>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 161 8>, <&iomuxc  8 208 8>, <&iomuxc 16  74 1>,
+		      <&iomuxc 17  73 1>, <&iomuxc 18  72 1>, <&iomuxc 19  71 1>,
+		      <&iomuxc 20  70 1>, <&iomuxc 21  69 1>, <&iomuxc 22  68 1>,
+		      <&iomuxc 23  79 2>, <&iomuxc 25 118 2>, <&iomuxc 27 117 1>,
+		      <&iomuxc 28 113 4>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc  0 97  2>, <&iomuxc 2 105 8>, <&iomuxc 10 99 6>,
+		      <&iomuxc 16 81 16>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc  5 136 1>, <&iomuxc  6 145 1>, <&iomuxc  7 150 1>,
+		      <&iomuxc  8 146 1>, <&iomuxc  9 151 1>, <&iomuxc 10 147 1>,
+		      <&iomuxc 11 152 1>, <&iomuxc 12 148 1>, <&iomuxc 13 153 1>,
+		      <&iomuxc 14 149 1>, <&iomuxc 15 154 1>, <&iomuxc 16  39 7>,
+		      <&iomuxc 23  56 1>, <&iomuxc 24  61 7>, <&iomuxc 31  46 1>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc  0 120 1>, <&iomuxc  2 77 1>, <&iomuxc  4 76 1>,
+		      <&iomuxc  5  47 9>, <&iomuxc 14 57 4>, <&iomuxc 18 37 1>,
+		      <&iomuxc 19  36 1>, <&iomuxc 20 35 1>, <&iomuxc 21 38 1>,
+		      <&iomuxc 22  29 6>, <&iomuxc 28 19 4>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0  23 6>, <&iomuxc  6  75 1>, <&iomuxc  7 156 1>,
+		      <&iomuxc  8 155 1>, <&iomuxc  9 170 1>, <&iomuxc 10 169 1>,
+		      <&iomuxc 11 157 1>, <&iomuxc 14 158 3>, <&iomuxc 17 204 1>,
+		      <&iomuxc 18 203 1>, <&iomuxc 19 182 1>, <&iomuxc 20 177 4>,
+		      <&iomuxc 24 175 1>, <&iomuxc 25 171 1>, <&iomuxc 26 181 1>,
+		      <&iomuxc 27 172 3>, <&iomuxc 30 176 1>, <&iomuxc 31  78 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 202 1>, <&iomuxc  1 201 1>, <&iomuxc  2 196 1>,
+		      <&iomuxc 3 195 1>, <&iomuxc  4 197 4>, <&iomuxc  8 205 1>,
+		      <&iomuxc 9 207 1>, <&iomuxc 10 206 1>, <&iomuxc 11 133 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi0_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu1_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi1_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi1_mux_from_mipi_vc1: endpoint {
+				remote-endpoint = <&mipi_vc1_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi1_mux_from_mipi_vc2: endpoint {
+				remote-endpoint = <&mipi_vc2_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@3 {
+			reg = <3>;
+
+			ipu1_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu1_csi1_mux>;
+			};
+		};
+
+		port@4 {
+			reg = <4>;
+
+			ipu1_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@5 {
+			reg = <5>;
+
+			ipu1_csi1_mux_to_ipu1_csi1: endpoint {
+				remote-endpoint = <&ipu1_csi1_from_ipu1_csi1_mux>;
+			};
+		};
+	};
+};
+
 &gpt {
-	compatible = "fsl,imx6dl-gpt", "fsl,imx6q-gpt";
+	compatible = "fsl,imx6dl-gpt";
 };
 
 &hdmi {
 	compatible = "fsl,imx6dl-hdmi";
 };
 
+&iomuxc {
+	compatible = "fsl,imx6dl-iomuxc";
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_ipu1_csi1_mux: endpoint {
+		remote-endpoint = <&ipu1_csi1_mux_to_ipu1_csi1>;
+	};
+};
+
 &ldb {
 	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
 		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -123,6 +316,82 @@
 		      "di0", "di1";
 };
 
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+
+		mipi_vc0_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc1_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc1>;
+		};
+
+		mipi_vc1_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc2_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc2>;
+		};
+
+		mipi_vc2_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mipi_vc3_to_ipu1_csi0_mux: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc3>;
+		};
+
+		mipi_vc3_to_ipu1_csi1_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&ipu1_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
+&mux {
+	mux-reg-masks = <0x34 0x00000007>, /* IPU_CSI0_MUX */
+			<0x34 0x00000038>, /* IPU_CSI1_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
 &vpu {
 	compatible = "fsl,imx6dl-vpu", "cnm,coda960";
 };
diff --git a/arch/arm/boot/dts/imx6q-apalis-eval.dts b/arch/arm/boot/dts/imx6q-apalis-eval.dts
new file mode 100644
index 000000000000..3fc079dfd61e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-eval.dts
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board";
+	compatible = "toradex,apalis_imx6q-eval", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_pcie_switch: regulator-pcie-switch {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "pcie_switch";
+		startup-delay-us = <100000>;
+		status = "okay";
+	};
+
+	reg_3v3_sw: regulator-3v3-sw {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3.3V_SW";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_3v3_sw>;
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	pcie-switch@58 {
+		compatible = "plx,pex8605";
+		reg = <0x58>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	vpcie-supply = <&reg_pcie_switch>;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
new file mode 100644
index 000000000000..44637d606e61
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include "imx6q-apalis-ixora-v1.2.dts"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
+	compatible = "toradex,apalis_imx6q-ixora-v1.1", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+
+};
+
+/delete-node/ &eeprom;
+/delete-node/ &reg_3v3_vmmc;
+/delete-node/ &reg_can1_supply;
+/delete-node/ &reg_can2_supply;
+
+&can1 {
+	/delete-property/ xceiver-supply;
+};
+
+&can2 {
+	/delete-property/ xceiver-supply;
+};
+
+/* MMC1 */
+&usdhc1 {
+	/delete-property/ cap-power-off-card;
+	/delete-property/ pinctrl-1;
+	/delete-property/ vmmc-supply;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
new file mode 100644
index 000000000000..717decda0ceb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.2.dts
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.2";
+	compatible = "toradex,apalis_imx6q-ixora-v1.2", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+
+	reg_3v3_vmmc: regulator-3v3-vmmc {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_3v3_vmmc>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "3v3_vmmc";
+		startup-delay-us = <100>;
+	};
+
+	reg_can1_supply: regulator-can1-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can1_power>;
+		regulator-name = "can1_supply";
+	};
+
+	reg_can2_supply: regulator-can2-supply {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_enable_can2_power>;
+		regulator-name = "can2_supply";
+	};
+};
+
+&can1 {
+	xceiver-supply = <&reg_can1_supply>;
+	status = "okay";
+};
+
+&can2 {
+	xceiver-supply = <&reg_can2_supply>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart24_forceoff>;
+
+	/*
+	 * uart-2-4-on-x21-enable-hog enables the UART transceiver for Apalis
+	 * UART2 and UART3. If one wants to disable the transceiver force
+	 * the GPIO to output-low, if one wants to control the transceiver
+	 * from user space delete the hog node.
+	 */
+	uart-2-4-on-x21-enable-hog {
+		gpio-hog;
+		gpios = <11 GPIO_ACTIVE_HIGH>; /* MXM3 180 */
+		output-high;
+	};
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* MMC1 */
+&usdhc1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_4bit_sleep &pinctrl_mmc_cd_sleep>;
+	bus-width = <4>;
+	cap-power-off-card;
+	vmmc-supply = <&reg_3v3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enable_3v3_vmmc: enable3v3vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can1_power: enablecan1powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0
+		>;
+	};
+
+	pinctrl_enable_can2_power: enablecan2powergrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart24_forceoff: uart24forceoffgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0
+		>;
+	};
+
+	pinctrl_usdhc1_4bit_sleep: usdhc1-4bitslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD     0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK     0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0  0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1  0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2  0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3  0x3000
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
new file mode 100644
index 000000000000..f338be435277
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "imx6q.dtsi"
+#include "imx6qdl-apalis.dtsi"
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board";
+	compatible = "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
+		     "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c3;
+		i2c2 = &i2c2;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_ixora>;
+
+		led4-green {
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_GREEN";
+		};
+
+		led4-red {
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			label = "LED_4_RED";
+		};
+
+		led5-green {
+			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_GREEN";
+		};
+
+		led5-red {
+			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+			label = "LED_5_RED";
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	/* M41T0M6 real time clock on carrier board */
+	rtc_i2c: rtc@68 {
+		compatible = "st,m41t0";
+		reg = <0x68>;
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_reset_moci>;
+	/* active-high meaning opposite of regular PERST# active-low polarity */
+	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	reset-gpio-active-high;
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&reg_usb_host_vbus {
+	status = "okay";
+};
+
+&reg_usb_otg_vbus {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&sound_spdif {
+	status = "okay";
+};
+
+&spdif {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usb_host_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+/* SD1 */
+&usdhc2 {
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_leds_ixora: ledsixoragrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-apf6dev.dts b/arch/arm/boot/dts/imx6q-apf6dev.dts
index 4e4de821d9e5..664b0af8f0bb 100644
--- a/arch/arm/boot/dts/imx6q-apf6dev.dts
+++ b/arch/arm/boot/dts/imx6q-apf6dev.dts
@@ -1,49 +1,6 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
 
 /dts-v1/;
 #include "imx6q.dtsi"
@@ -54,7 +11,8 @@
 	model = "Armadeus APF6 Quad / Dual Module on APF6Dev Board";
 	compatible = "armadeus,imx6q-apf6dev", "armadeus,imx6q-apf6", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index 78df05e9d1ce..75586299d9ca 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -1,23 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "imx6q.dtsi"
 
 / {
 	model = "Freescale i.MX6 Quad Armadillo2 Board";
 	compatible = "fsl,imx6q-arm2", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 
@@ -78,19 +74,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
@@ -182,8 +178,10 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
 };
 
@@ -196,8 +194,8 @@
 };
 
 &usdhc3 {
-	cd-gpios = <&gpio6 11 0>;
-	wp-gpios = <&gpio6 14 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3
@@ -217,7 +215,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	fsl,dte-mode;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-b450v3.dts b/arch/arm/boot/dts/imx6q-b450v3.dts
new file mode 100644
index 000000000000..d994b32ad825
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b450v3.dts
@@ -0,0 +1,157 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B450v3";
+	compatible = "ge,imx6q-b450v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
+	P04-hog {
+		gpio-hog;
+		gpios = <4 0>;
+		output-low;
+		line-name = "PCA9539-P04";
+	};
+
+	P07-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b650v3.dts b/arch/arm/boot/dts/imx6q-b650v3.dts
new file mode 100644
index 000000000000..fa1a1df37cde
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b650v3.dts
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B650v3";
+	compatible = "ge,imx6q-b650v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "", "SM_D_ACT", "DP1_RST#", "",
+			  "WD15S_EN", "WD15S_DIS#", "", "",
+			  "", "", "", "";
+
+	P07-hog {
+		gpio-hog;
+		gpios = <7 0>;
+		output-low;
+		line-name = "PCA9539-P07";
+	};
+};
+
+&usbphy1 {
+	fsl,tx-cal-45-dn-ohms = <55>;
+	fsl,tx-cal-45-dp-ohms = <55>;
+	fsl,tx-d-cal = <100>;
+};
+
+&pci_root {
+	/* Intel Corporation I210 Gigabit Network Connection */
+	switch_nic: ethernet@3,0 {
+		compatible = "pci8086,1533";
+		reg = <0x00010000 0 0 0 0>;
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "enacq";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport1";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+
+	port@5 {
+		reg = <5>;
+		label = "enembc";
+
+		/* connected to Ethernet MAC of AT91RM9200 in MII mode */
+		fixed-link {
+			speed = <100>;
+			full-duplex;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
new file mode 100644
index 000000000000..db8c332df6a1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts
@@ -0,0 +1,295 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-bx50v3.dtsi"
+
+/ {
+	model = "General Electric B850v3";
+	compatible = "ge,imx6q-b850v3", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart3;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&stdp4028_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pca9547_ddc: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux2_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		mux2_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		mux2_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux2_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		mux2_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		mux2_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux2_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux2_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&mux2_i2c1>;
+};
+
+&mux1_i2c1 {
+	ads7830@4a {
+		compatible = "ti,ads7830";
+		reg = <0x4a>;
+	};
+};
+
+&mux2_i2c2 {
+	clock-frequency = <100000>;
+
+	stdp2690@72 {
+		compatible = "megachips,stdp2690-ge-b850v3-fw";
+		reg = <0x72>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp2690_in: endpoint {
+					remote-endpoint = <&stdp4028_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp2690_out: endpoint {
+					/* Connector for external display */
+				};
+			};
+		};
+	};
+
+	stdp4028@73 {
+		compatible = "megachips,stdp4028-ge-b850v3-fw";
+		reg = <0x73>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				stdp4028_in: endpoint {
+					remote-endpoint = <&lvds0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				stdp4028_out: endpoint {
+					remote-endpoint = <&stdp2690_in>;
+				};
+			};
+		};
+	};
+};
+
+&pca9539 {
+	gpio-line-names = "AMB_P_INT1#", "AMB_P_INT2#", "BT_EN", "WLAN_EN",
+			  "REMOTE_ON_PML#", "SM_D_ACT", "DP1_RST#", "DP2_RST#",
+			  "", "", "", "",
+			  "", "", "", "";
+
+	P10-hog {
+		gpio-hog;
+		gpios = <8 0>;
+		output-low;
+		line-name = "PCA9539-P10";
+	};
+
+	P11-hog {
+		gpio-hog;
+		gpios = <9 0>;
+		output-low;
+		line-name = "PCA9539-P11";
+	};
+};
+
+&pci_root {
+	/* PLX Technology, Inc. PEX 8605 PCI Express 4-port Gen2 Switch */
+	bridge@1,0 {
+		compatible = "pci10b5,8605";
+		reg = <0x00010000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+
+		bridge@2,1 {
+			compatible = "pci10b5,8605";
+			reg = <0x00020800 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			ethernet@3,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00030000 0 0 0 0>;
+			};
+		};
+
+		bridge@2,2 {
+			compatible = "pci10b5,8605";
+			reg = <0x00021000 0 0 0 0>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+
+			/* Intel Corporation I210 Gigabit Network Connection */
+			switch_nic: ethernet@4,0 {
+				compatible = "pci8086,1533";
+				reg = <0x00040000 0 0 0 0>;
+			};
+		};
+	};
+};
+
+&switch_ports {
+	port@0 {
+		reg = <0>;
+		label = "eneport1";
+		phy-handle = <&switchphy0>;
+	};
+
+	port@1 {
+		reg = <1>;
+		label = "eneport2";
+		phy-handle = <&switchphy1>;
+	};
+
+	port@2 {
+		reg = <2>;
+		label = "enix";
+		phy-handle = <&switchphy2>;
+	};
+
+	port@3 {
+		reg = <3>;
+		label = "enid";
+		phy-handle = <&switchphy3>;
+	};
+
+	port@4 {
+		reg = <4>;
+		label = "cpu";
+		ethernet = <&switch_nic>;
+		phy-handle = <&switchphy4>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
new file mode 100644
index 000000000000..f266f1b7e0cf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -0,0 +1,661 @@
+/*
+ * Support for imx6 based Advantech DMS-BA16 Qseven module
+ *
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_display>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <255>;
+		enable-gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "U-Boot";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x10000>;
+		};
+
+		partition@d0000 {
+			label = "spare";
+			reg = <0xd0000 0x320000>;
+		};
+
+		partition@3f0000 {
+			label = "mfg";
+			reg = <0x3f0000 0x10000>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&reg_3p3v>;
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+		};
+
+		regulators {
+			vdd_bcore1: bcore1 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bcore2: bcore2 {
+				regulator-min-microvolt = <1420000>;
+				regulator-max-microvolt = <1420000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bpro: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bmem: bmem {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bio: bio {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_bperi: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_ldo1: ldo1 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo2: ldo2 {
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1860000>;
+			};
+
+			vdd_ldo3: ldo3 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo4: ldo4 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3440000>;
+			};
+
+			vdd_ldo5: ldo5 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo6: ldo6 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo7: ldo7 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo8: ldo8 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo9: ldo9 {
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo10: ldo10 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+			};
+
+			vdd_ldo11: ldo11 {
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	rtc@32 {
+		compatible = "epson,rx8010";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x32>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	fsl,tx-swing-full = <103>;
+	fsl,tx-swing-low = <103>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&sata {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbhub>;
+	vbus-supply = <&reg_usb_h1_vbus>;
+	reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
+	bus-width = <8>;
+	vmmc-supply = <&vdd_bperi>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_display: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x1b0b0
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			/* SPI1 CS */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO	0x1b0b0
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI		0x1b0b0
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK		0x1b0b0
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			/* FEC Reset */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x1b0b0
+			/* AR8033 Interrupt */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05        0x1b0b0
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* GPIO 0-7 */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00  0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01  0x1b0b0
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02  0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03  0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04  0x1b0b0
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05  0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06  0x1b0b0
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07  0x1b0b0
+			/* SUS_S3_OUT to CPLD */
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe Reset */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
+			/* PCIe Wake */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			/* PMIC Interrupt */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			/* RTC_INT */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			/* HUB_RESET */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD	0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK	0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0	0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1	0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2	0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3	0x17059
+			/* uSDHC2 CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_reset: usdhc3grp-reset {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__SD3_RESET   0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD	0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK	0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0	0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1	0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2	0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4	0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5	0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6	0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7	0x17059
+			/* uSDHC4 CD */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x1b0b0
+			/* uSDHC4 SDIO PWR */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0
+			/* uSDHC4 SDIO WP */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			/* uSDHC4 SDIO LED */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bosch-acc.dts b/arch/arm/boot/dts/imx6q-bosch-acc.dts
new file mode 100644
index 000000000000..8263bfef9bf8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bosch-acc.dts
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for the i.MX6-based Bosch ACC board.
+ *
+ * Copyright (C) 2016 Garz & Fricke GmbH
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Heiko Schocher <hs@denx.de>
+ * Copyright (C) 2018 DENX Software Engineering GmbH, Niel Fourie <lusus@denx.de>
+ * Copyright (C) 2019-2021 Bosch Thermotechnik GmbH, Matthias Winker <matthias.winker@bosch.com>
+ * Copyright (C) 2022 DENX Software Engineering GmbH, Philip Oberfichtner <pro@denx.de>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "Bosch ACC";
+	compatible = "bosch,imx6q-acc", "fsl,imx6q";
+
+	aliases {
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc4;
+		mmc1 = &usdhc2;
+		serial0 = &uart2;
+		serial1 = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 200000>;
+		brightness-levels = <0 61 499 1706 4079 8022 13938 22237 33328 47623 65535>;
+		num-interpolated-steps = <10>;
+		default-brightness-level = <60>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel {
+		compatible = "dataimage,fg1001l0dsswmg01";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	refclk: refclk {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-div = <1>;
+		clock-mult = <1>;
+		clock-output-names = "12mhz_refclk";
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO2>,
+				  <&clks IMX6QDL_CLK_CKO2_SEL>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO2>,
+					 <&clks IMX6QDL_CLK_CKO2_PODF>,
+					 <&clks IMX6QDL_CLK_OSC>;
+		assigned-clock-rates = <0>, <12000000>, <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+
+		cpu1: cpu@1 {
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1225000
+				852000  1225000
+				792000  1150000
+				396000  950000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1225000
+				996000	1175000
+				852000	1175000
+				792000	1150000
+				396000	1150000
+			>;
+		};
+	};
+
+	pwm-leds {
+		compatible = "pwm-leds";
+
+		led_red: led-0 {
+			color = <LED_COLOR_ID_RED>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm2 0 500000>;
+		};
+
+		led_white: led-1 {
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <248>;
+			default-state = "off";
+			pwms = <&pwm3 0 500000>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reset_gpio_led>;
+
+		led-2 {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_5p0: regulator-5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5p0";
+	};
+
+	reg_vin: regulator-vin {
+		compatible = "regulator-fixed";
+		regulator-name = "VIN";
+		regulator-min-microvolt = <4500000>;
+		regulator-max-microvolt = <4500000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_usb_h2_vbus: regulator-usb-h2-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h2_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-always-on;
+	};
+
+	reg_vsnvs: regulator-vsnvs {
+		compatible = "regulator-fixed";
+		regulator-name = "VSNVS_3V0";
+		regulator-min-microvolt = <3000000>;
+		regulator-max-microvolt = <3000000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_lcd: regulator-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "LCD0 POWER";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_enable>;
+		gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+
+	reg_dac: regulator-dac {
+		compatible = "regulator-fixed";
+		regulator-name = "vref_dac";
+		regulator-min-microvolt = <20000>;
+		regulator-max-microvolt = <20000>;
+		vin-supply = <&reg_5p0> ;
+		regulator-boot-on;
+	};
+
+	reg_sw4: regulator-sw4 {
+		compatible = "regulator-fixed";
+		regulator-name = "SW4_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+
+	reg_sys: regulator-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_4V2";
+		regulator-min-microvolt = <4200000>;
+		regulator-max-microvolt = <4200000>;
+		regulator-always-on;
+		vin-supply = <&reg_5p0>;
+	};
+};
+
+&reg_arm {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&reg_vdd3p0 {
+	vin-supply = <&reg_vsnvs>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET>,
+		<&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_out";
+	phy-mode = "rmii";
+	phy-supply = <&reg_sw4>;
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+			smsc,disable-energy-detect;
+		};
+	};
+};
+
+&gpu_vg {
+	status = "disabled";
+};
+
+&gpu_2d {
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1c_reg: sw1c {
+				regulator-name = "VDD_SOC (sw1abc)";
+				regulator-min-microvolt = <1275000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-name = "VDD_ARM (sw2)";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5a";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw3b_reg: sw3b {
+				compatible = "regulator-fixed";
+				regulator-name = "DDR_1V5b";
+				regulator-boot-on;
+				regulator-always-on;
+
+			};
+
+			sw4_reg: sw4 {
+				regulator-name = "AUX 3V15 (sw4)";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
+				status = "disabled";
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+				regulator-always-on;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	lm75: sensor@49 {
+		compatible = "national,lm75b";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lm75>;
+		reg = <0x49>;
+	};
+
+	eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+
+	rtc: rtc@51 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	eeprom_ext: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	usb3503: usb@8 {
+		compatible = "smsc,usb3503";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb3503>;
+		reg = <0x08>;
+		connect-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* Old: 0, SS: HIGH */
+		intn-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>; /* Old: 1, SS: HIGH */
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>; /* Old: 0, SS: HIGH */
+		initial-mode = <1>;
+		clocks = <&refclk>;
+		clock-names = "refclk";
+		refclk-frequency = <12000000>;
+	};
+
+	exc3000: touchscreen@2a {
+		compatible = "eeti,exc3000";
+		reg = <0x2a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ctouch>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+		touchscreen-size-x = <4096>;
+		touchscreen-size-y = <4096>;
+	};
+
+	vcnl4035: light-sensor@60 {
+		compatible = "vishay,vcnl4035";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_proximity>;
+		reg = <0x60>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "idle", "active";
+	pinctrl-0 = <&pinctrl_usbh2_idle>;
+	pinctrl-1 = <&pinctrl_usbh2_active>;
+	vbus-supply = <&reg_usb_h2_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usb_otg_vbus>;
+	disable-over-current;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbphynop1 {
+	clocks = <&clks IMX6QDL_CLK_USBPHY1>;
+	clock-names = "main_clk";
+	vcc-supply = <&reg_usb_h1_vbus>;
+};
+
+&usbphynop2 {
+	vcc-supply = <&reg_usb_h2_vbus>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	voltage-ranges = <3300 3300>;
+	vmmc-supply = <&reg_sw4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	fsl,ext-reset-output;
+	timeout-sec = <10>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0	/* FEC INT */
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x0001b098
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x0001b098
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x0001b098
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_reset_gpio_led: reset-gpio-led-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b810
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b810
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd_enable: lcdenablegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x1b0b0 /* lcd enable */
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16  0x1b0b0 /* sel6_8 */
+		>;
+	};
+
+	pinctrl_lm75: lm75grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_proximity: proximitygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x0001b0b0
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 /* RTC INT */
+		>;
+	};
+
+	pinctrl_ctouch: ctouch-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* CTOUCH_INT */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x0001b0b0 /* CTOUCH_RESET */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x0001b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh2_idle: usbh2-idle-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00013018
+		>;
+	};
+
+	pinctrl_usbh2_active: usbh2-active-grp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__USB_H2_DATA      0x00013018
+			MX6QDL_PAD_RGMII_TX_CTL__USB_H2_STROBE 0x00017018
+		>;
+	};
+
+	pinctrl_usb3503: usb3503-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1    0x00000018
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12     0x1b0b0 /* USB INT */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x0001b0b0 /* USB Reset */
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16    0x1b0b0 /* USB Connect */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017069
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00010038
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017069
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017069
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017069
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017069
+			MX6QDL_PAD_GPIO_4__SD2_CD_B    0x0001b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x00017059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x00010059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x00017059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x00017059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x00017059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x00017059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x00017059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x00017059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x00017059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x00017059
+		>;
+	};
+
+	pinctrl_wdog1: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B 0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
new file mode 100644
index 000000000000..ead83091e193
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -0,0 +1,409 @@
+/*
+ * Copyright 2015 Timesys Corporation.
+ * Copyright 2015 General Electric Company
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6q-ba16.dtsi"
+
+/ {
+	mclk: clock-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
+
+	reg_wl18xx_vmmc: regulator-wl18xx {
+		compatible = "regulator-fixed";
+		regulator-name = "vwl1807";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_wlan: regulator-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	mdio0: mdio-gpio {
+		compatible = "virtual,mdio-gpio";
+		gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>, /* mdc */
+			<&gpio2 7 GPIO_ACTIVE_HIGH>; /* mdio */
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch: switch@0 {
+			compatible = "marvell,mv88e6085"; /* 88e6240*/
+			reg = <0>;
+
+			interrupt-parent = <&gpio2>;
+			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+
+			switch_ports: ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				switchphy0: switchphy@0 {
+					reg = <0>;
+					interrupt-parent = <&switch>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy1: switchphy@1 {
+					reg = <1>;
+					interrupt-parent = <&switch>;
+					interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy2: switchphy@2 {
+					reg = <2>;
+					interrupt-parent = <&switch>;
+					interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy3: switchphy@3 {
+					reg = <3>;
+					interrupt-parent = <&switch>;
+					interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				switchphy4: switchphy@4 {
+					reg = <4>;
+					interrupt-parent = <&switch>;
+					interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
+				};
+			};
+		};
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: flash@0 {
+		compatible = "atmel,at25";
+		spi-max-frequency = <10000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	pca9547: mux@70 {
+		compatible = "nxp,pca9547";
+		reg = <0x70>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux1_i2c1: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+
+			ads7830: ads7830@48 {
+				compatible = "ti,ads7830";
+				reg = <0x48>;
+			};
+
+			mma8453: mma8453@1c {
+				compatible = "fsl,mma8453";
+				reg = <0x1c>;
+			};
+		};
+
+		mux1_i2c2: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+
+			eeprom: eeprom@50 {
+				compatible = "atmel,24c08";
+				reg = <0x50>;
+			};
+
+			mpl3115: mpl3115@60 {
+				compatible = "fsl,mpl3115";
+				reg = <0x60>;
+			};
+		};
+
+		mux1_i2c3: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		mux1_i2c4: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+
+			sgtl5000: codec@a {
+				compatible = "fsl,sgtl5000";
+				reg = <0x0a>;
+				clocks = <&mclk>;
+				VDDA-supply = <&reg_1p8v>;
+				VDDIO-supply = <&reg_3p3v>;
+			};
+		};
+
+		mux1_i2c5: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+
+			pca9539: pca9539@74 {
+				compatible = "nxp,pca9539";
+				reg = <0x74>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&gpio2>;
+				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+				P12-hog {
+					gpio-hog;
+					gpios = <10 0>;
+					output-low;
+					line-name = "PCA9539-P12";
+				};
+
+				P13-hog {
+					gpio-hog;
+					gpios = <11 0>;
+					output-low;
+					line-name = "PCA9539-P13";
+				};
+
+				P14-hog {
+					gpio-hog;
+					gpios = <12 0>;
+					output-low;
+					line-name = "PCA9539-P14";
+				};
+
+				P15-hog {
+					gpio-hog;
+					gpios = <13 0>;
+					output-low;
+					line-name = "PCA9539-P15";
+				};
+
+				P16-hog {
+					gpio-hog;
+					gpios = <14 0>;
+					output-low;
+					line-name = "PCA9539-P16";
+				};
+
+				P17-hog {
+					gpio-hog;
+					gpios = <15 0>;
+					output-low;
+					line-name = "PCA9539-P17";
+				};
+			};
+		};
+
+		mux1_i2c6: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+		};
+
+		mux1_i2c7: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+		};
+
+		mux1_i2c8: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03	0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0
+		>;
+	};
+};
+
+&pmu {
+	secure-reg-access;
+};
+
+&usdhc2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_wl18xx_vmmc>;
+	no-1-8-v;
+	non-removable;
+	wakeup-source;
+	keep-power-in-suspend;
+	cap-power-off-card;
+	max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&pcie {
+	/* Synopsys, Inc. Device */
+	pci_root: root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI1_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI1_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
+};
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 99b46f8030ad..1ad41c944b4b 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -3,22 +3,55 @@
  *
  * Author: Valentin Raevsky <valentin@compulab.co.il>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 #include "imx6q.dtsi"
 
 / {
 	model = "CompuLab CM-FX6";
 	compatible = "compulab,cm-fx6", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 
@@ -31,6 +64,209 @@
 			linux,default-trigger = "heartbeat";
 		};
 	};
+
+	awnh387_pwrseq: pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pwrseq>;
+		compatible = "mmc-pwrseq-sd8787";
+		powerdown-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-pcie-power-on-gpio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: usb_otg_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound-analog {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board analog audio";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Line", "Line Out",
+			"Microphone", "Mic Jack",
+			"Line", "Line In";
+		simple-audio-card,routing =
+			"Headphone Jack", "RHPOUT",
+			"Headphone Jack", "LHPOUT",
+			"MICIN", "Mic Bias",
+			"Mic Bias", "Mic Jack";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_master>;
+		simple-audio-card,frame-master = <&sound_master>;
+		simple-audio-card,bitclock-inversion;
+
+		sound_master: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+			system-clock-frequency = <2822400>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&wm8731>;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-out;
+		spdif-in;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			IMX_AUDMUX_V2_PTCR_RCSEL(3 | 0x8) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(3)
+		>;
+	};
+
+	audmux4 {
+		fsl,audmux-port = <3>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+			IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			IMX_AUDMUX_V2_PTCR_RCSEL(1 | 0x8) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(1))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&cpu0 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu1 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu2 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&cpu3 {
+	/*
+	 * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+	 * the module behaves unstable at this frequency. Hence, remove the
+	 * 1.2GHz operation point here.
+	 */
+	operating-points = <
+		/* kHz	uV */
+		996000	1250000
+		852000	1250000
+		792000	1175000
+		396000	975000
+	>;
+	fsl,soc-operating-points = <
+		/* ARM kHz	SOC-PU uV */
+		996000		1250000
+		852000		1250000
+		792000		1175000
+		396000		1175000
+	>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
 };
 
 &fec {
@@ -46,62 +282,210 @@
 	status = "okay";
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+	clock-frequency = <100000>;
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	wm8731: codec@1a {
+		#sound-dai-cells = <0>;
+		compatible = "wlf,wm8731";
+		reg = <0x1a>;
+	};
+};
+
 &iomuxc {
-	imx6q-cm-fx6 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__AUD4_RXC   0x17059
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD  0x17059
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC  0x17059
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD  0x17059
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x17059
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-				MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
-			>;
-		};
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19	0x100b1
+		>;
+	};
 
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwrseq: pwrseqgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x130b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
 	};
 };
 
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie_power_on_gpio>;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi2 {
+	assigned-clocks = <&clks IMX6QDL_CLK_SSI2_SEL>,
+			<&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <786432000>;
+	status = "okay";
+};
+
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
 	status = "okay";
 };
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	mmc-pwrseq = <&awnh387_pwrseq>;
+	non-removable;
+	/*
+	 * If the OS probes the Bluetooth AMP function advertised on this bus
+	 * but the firmware in place does not support it, the WiFi/BT module
+	 * gets unresponsive.
+	 * Users who configured their OS properly can enable this node to gain
+	 * WiFi and/or plain Bluetooth support.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
new file mode 100644
index 000000000000..3e59ebbb3608
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cubox-i-emmc-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
new file mode 100644
index 000000000000..dab70d1230a2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-cubox-i-som-v15.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-cubox-i.dtsi"
+
+/ {
+	model = "SolidRun Cubox-i Dual/Quad (1.5som)";
+	compatible = "solidrun,cubox-i/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts
index 353425edcdf4..1c7b262e3709 100644
--- a/arch/arm/boot/dts/imx6q-cubox-i.dts
+++ b/arch/arm/boot/dts/imx6q-cubox-i.dts
@@ -10,17 +10,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -29,11 +29,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -41,6 +41,8 @@
 /dts-v1/;
 
 #include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-cubox-i.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
index fd0ad9a8866c..8bfe6337cd65 100644
--- a/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
+++ b/arch/arm/boot/dts/imx6q-dfi-fs700-m60.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Sascha Hauer <s.hauer@pengutronix.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #ifndef __DTS_V1__
@@ -20,4 +14,10 @@
 / {
 	model = "DFI FS700-M60-6QD i.MX6qd Q7 Board";
 	compatible = "dfi,fs700-m60-6qd", "dfi,fs700e-m60", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
 };
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
new file mode 100644
index 000000000000..d4d57370615d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM iMX6 variant:
+ * DHCM-iMX6Q-C0800-R102-F0819-E-SD-RTC-T-HS-I-01D2
+ * DHCOM PCB number: 493-300 or newer
+ * PDK2 PCB number: 516-400 or newer
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-dhcom-som.dtsi"
+#include "imx6qdl-dhcom-pdk2.dtsi"
+
+/ {
+	model = "DH electronics i.MX6Q DHCOM on Premium Developer Kit (2)";
+	compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som",
+		     "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
new file mode 100644
index 000000000000..16658b76fc4e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts
@@ -0,0 +1,51 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q-display5.dtsi"
+
+&panel {
+	compatible = "tianma,tm070jdhg30";
+};
+
+&ldb {
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-display5.dtsi b/arch/arm/boot/dts/imx6q-display5.dtsi
new file mode 100644
index 000000000000..fef5d7254536
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-display5.dtsi
@@ -0,0 +1,596 @@
+/*
+ * Copyright 2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is licensed under the terms of the GNU General Public
+ *     License version 2.  This program is licensed "as is" without
+ *     any warranty of any kind, whether express or implied.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Liebherr (LWN) display5 i.MX6 Quad Board";
+	compatible = "lwn,display5", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 0>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <250>;
+		enable-gpios = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lvds>;
+		gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbh1_vbus: usb-h1-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-enable-ramp-delay = <300000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		label = "tfa9879-mono";
+
+		simple-audio-card,dai-link {
+			/* DAC */
+			format = "i2s";
+			bitclock-master = <&dailink_master>;
+			frame-master = <&dailink_master>;
+
+			dailink_master: cpu {
+			    sound-dai = <&ssi2>;
+			};
+			codec {
+			    sound-dai = <&codec>;
+			};
+		};
+	};
+
+	panel: panel-lvds0 {
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(5) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(5) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(5)
+		>;
+	};
+
+	aud6 {
+		fsl,audmux-port = <5>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_RFSEL(8) |
+			 IMX_AUDMUX_V2_PTCR_RCSEL(8) |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(1) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(1) |
+			 IMX_AUDMUX_V2_PTCR_RFSDIR |
+			 IMX_AUDMUX_V2_PTCR_RCLKDIR |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+		>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs &pinctrl_ecspi2_flwp>;
+	status = "okay";
+
+	s25fl256s: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+
+		partition@0 {
+			label = "SPL (spi)";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+		partition@1 {
+			label = "u-boot (spi)";
+			reg = <0x20000 0x100000>;
+			read-only;
+		};
+		partition@2 {
+			label = "uboot-env (spi)";
+			reg = <0x120000 0x10000>;
+		};
+		partition@3 {
+			label = "uboot-envr (spi)";
+			reg = <0x130000 0x10000>;
+		};
+		partition@4 {
+			label = "linux-recovery (spi)";
+			reg = <0x140000 0x800000>;
+		};
+		partition@5 {
+			label = "swupdate-fitImg (spi)";
+			reg = <0x940000 0x400000>;
+		};
+		partition@6 {
+			label = "swupdate-initramfs (spi)";
+			reg = <0xD40000 0x800000>;
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethernet_phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		ethernet_phy0: ethernet-phy@0 {
+			compatible = "marvell,88E1510";
+			device_type = "ethernet-phy";
+			/* Set LED0 control: */
+			/* On - Link, Blink - Activity, Off - No Link */
+			marvell,reg-init = <3 0x10 0 0x1011>;
+			max-speed = <100>;
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: tfa9879@6c {
+		#sound-dai-cells = <0>;
+		compatible = "nxp,tfa9879";
+		reg = <0x6C>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	at24@50 {
+		compatible = "atmel,24c256";
+		pagesize = <64>;
+		reg = <0x50>;
+	};
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* I2S OUTPUT AUD6*/
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD  0x130b0
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD  0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS  0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC  0x130b0
+		>;
+	};
+
+	pinctrl_backlight: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07    0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi2_flwp: ecspi2flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lvds: reqlvdsgrp {
+		fsl,pins = <
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13      0x1b0b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA    0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__USB_H1_OC  0x030b0
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1_vbus_grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET	0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index 4fa254347798..9591848cbd37 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Data Modul AG
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -29,7 +23,8 @@
 		stmpe-i2c1 = &stmpe2;
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 
@@ -104,12 +99,11 @@
 &ecspi5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi5>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio1 12 0>;
+	cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
-	flash: m25p80@0 {
-		compatible = "m25p80";
+	flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <40000000>;
 		reg = <0>;
 	};
@@ -118,8 +112,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 0>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 	phy-supply = <&vgen2_1v2_eth>;
 	status = "okay";
 };
@@ -140,7 +134,7 @@
 		     &pinctrl_pfuze>;
 	status = "okay";
 
-	pmic: pfuze100@08 {
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 		interrupt-parent = <&gpio3>;
@@ -282,7 +276,7 @@
 	};
 
 	rtc: m41t62@68 {
-		compatible = "stm,m41t62";
+		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
 };
@@ -324,18 +318,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -436,7 +430,7 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 8 0>;
+	reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
new file mode 100644
index 000000000000..137db38f0d27
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "imx6q-ba16.dtsi"
+
+/ {
+	model = "Advantech DMS-BA16";
+	compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sys_mclk: clock-sys-mclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ba16-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-ba16-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5>;
+	status = "okay";
+
+	m25_eeprom: flash@0 {
+		compatible = "atmel,at25256B", "atmel,at25";
+		spi-max-frequency = <20000000>;
+		size = <0x8000>;
+		pagesize = <64>;
+		reg = <0>;
+		address-width = <16>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03   0x1b0b0
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sys_mclk>;
+		lrclk-strength = <0x3>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&sata {
+	fsl,no-spread-spectrum;
+	fsl,transmit-atten-16ths = <12>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-level-mV = <1133>;
+	fsl,receive-dpll-mode = <1>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-ds.dts b/arch/arm/boot/dts/imx6q-ds.dts
new file mode 100644
index 000000000000..b0a63a133977
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ds.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-ds.dtsi"
+
+/ {
+	model = "DaSheng i.MX6 Quad Com-9xx Board";
+	compatible = "ds,imx6q-sbc", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-emcon-avari.dts b/arch/arm/boot/dts/imx6q-emcon-avari.dts
new file mode 100644
index 000000000000..0f582a9d4c0e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-emcon-avari.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-emcon.dtsi"
+#include "imx6qdl-emcon-avari.dtsi"
+
+/ {
+	model = "emtrion SoM emCON-MX6 Dual/Quad on Avari";
+	compatible = "emtrion,emcon-mx6-avari", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
new file mode 100644
index 000000000000..78d941fef5df
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -0,0 +1,518 @@
+/*
+ * Copyright 2016 United Western Technologies.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "Uniwest Evi";
+	compatible = "uniwest,imx6q-evi", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_usbh1_vbus: regulator-usbhubreset {
+		compatible = "regulator-fixed";
+		regulator-name = "usbh1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+		startup-delay-us = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_hubreset>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotgvbus>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	panel {
+		compatible = "sharp,lq101k1ly04";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
+	status = "okay";
+
+	fpga: fpga@0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_fpgaspi>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>,
+		<&gpio4 25 GPIO_ACTIVE_LOW>,
+		<&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3cs>;
+	status = "okay";
+};
+
+&ecspi5 {
+	cs-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>,
+		<&gpio1 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 12 GPIO_ACTIVE_LOW>,
+		<&gpio2 9 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5 &pinctrl_ecspi5cs>;
+	status = "okay";
+
+	eeprom: m95m02@1 {
+		compatible = "st,m95m02", "atmel,at25";
+		size = <262144>;
+		pagesize = <256>;
+		address-width = <24>;
+		spi-max-frequency = <5000000>;
+		reg = <1>;
+	};
+
+	pb_rtc: rtc@3 {
+		compatible = "nxp,rtc-pcf2123";
+		spi-max-frequency = <2450000>;
+		spi-cs-high;
+		reg = <3>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpminand>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	clock-frequency = <100000>;
+	scl-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	battery: sbs-battery@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,poll-retry-count = <100>;
+		sbs,i2c-retry-count = <100>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usbh1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	ranges = <0 0 0x08000000 0x08000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weimfpga &pinctrl_weimcs>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* pwr mcu alert irq */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+			/* remainder ???? */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1cs: ecspi1csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x10068
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x10068
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x1f068
+		>;
+	};
+
+	pinctrl_ecspi3cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi5: ecspi5grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__ECSPI5_SCLK 0x100b1
+			MX6QDL_PAD_SD2_CMD__ECSPI5_MOSI 0x100b1
+			MX6QDL_PAD_SD2_DAT0__ECSPI5_MISO 0x100b1
+		>;
+	};
+
+	pinctrl_ecspi5cs: ecspi5csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13 0x1b0b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
+	};
+
+	pinctrl_fpgaspi: fpgaspigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpminand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x4001b8b1
+		>;
+	};
+
+	pinctrl_weimcs: weimcsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0b1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0b1
+		>;
+	};
+
+	pinctrl_weimfpga: weimfpgagrp {
+		fsl,pins = <
+			/* weim misc */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW 0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb060
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0b1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0b1
+			MX6QDL_PAD_EIM_EB0__EIM_EB0_B 0xb0b1
+			MX6QDL_PAD_EIM_EB1__EIM_EB1_B 0xb0b1
+			MX6QDL_PAD_EIM_EB2__EIM_EB2_B 0xb0b1
+			MX6QDL_PAD_EIM_EB3__EIM_EB3_B 0xb0b1
+			/* weim data */
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00 0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15 0x1b0b0
+			MX6QDL_PAD_EIM_D16__EIM_DATA16 0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17 0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18 0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19 0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20 0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21 0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22 0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23 0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24 0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25 0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26 0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27 0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28 0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29 0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30 0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31 0x1b0b0
+			/* weim address */
+			MX6QDL_PAD_EIM_A25__EIM_ADDR25 0xb0b1
+			MX6QDL_PAD_EIM_A24__EIM_ADDR24 0xb0b1
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23 0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22 0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21 0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20 0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19 0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD3_CLK__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD3_CMD__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__USB_H1_OC 0x1b0b0
+			/* usbh1_b OC */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh1_hubreset: usbh1hubresetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
+		>;
+	};
+
+	pinctrl_usbotgvbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gk802.dts b/arch/arm/boot/dts/imx6q-gk802.dts
index 703539cf36d3..2fda68f9d3f6 100644
--- a/arch/arm/boot/dts/imx6q-gk802.dts
+++ b/arch/arm/boot/dts/imx6q-gk802.dts
@@ -1,12 +1,9 @@
-/*
- * Copyright (C) 2013 Philipp Zabel
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2.  This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- */
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2013 Philipp Zabel
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "imx6q.dtsi"
 
 / {
@@ -17,7 +14,8 @@
 		stdout-path = &uart4;
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
@@ -42,8 +40,8 @@
 		recovery-button {
 			label = "recovery";
 			gpios = <&gpio3 16 1>;
-			linux,code = <0x198>; /* KEY_RESTART */
-			gpio-key,wakeup;
+			linux,code = <KEY_RESTART>;
+			wakeup-source;
 		};
 	};
 };
@@ -161,7 +159,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio6 11 0>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts
index 8e8bcd8fe0fb..f80173458e3f 100644
--- a/arch/arm/boot/dts/imx6q-gw51xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw51xx.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts
index a12c47e5ee05..6e1c493c9c8c 100644
--- a/arch/arm/boot/dts/imx6q-gw52xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw52xx.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -18,6 +12,64 @@
 	compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q";
 };
 
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts
index d76aaa83dad0..f13df8e9c8c4 100644
--- a/arch/arm/boot/dts/imx6q-gw53xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw53xx.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -18,6 +12,64 @@
 	compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q";
 };
 
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
+};
+
 &sata {
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 822ffb231c57..522a51042965 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -19,7 +13,6 @@
 
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet1 = &eth1;
 		i2c0 = &i2c1;
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
@@ -41,27 +34,28 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
@@ -138,14 +132,13 @@
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
-		compatible = "sst,w25q256";
+	flash: flash@0 {
+		compatible = "sst,w25q256", "jedec,spi-nor";
 		spi-max-frequency = <30000000>;
 		reg = <0>;
 	};
@@ -154,8 +147,8 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -213,7 +206,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@08 {
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -324,15 +317,15 @@
 		reg = <0x1c>;
 	};
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	touchscreen: egalax_ts@04 {
+	touchscreen: egalax_ts@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio7>;
@@ -348,10 +341,6 @@
 &pcie {
 	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
-
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
 };
 
 &ssi1 {
@@ -398,127 +387,124 @@
 };
 
 &iomuxc {
-	imx6q-gw5400-a {
-
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+		>;
+	};
 
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
-				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
-				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
-			>;
-		};
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0 /* SPINOR_CS0# */
+		>;
+	};
 
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
 
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0 /* user1 led */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0 /* user2 led */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0 /* user3 led */
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+		>;
+	};
 
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
-			>;
-		};
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0 /* GPS_PPS */
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-			>;
-		};
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts
index 6e8f53e92a2d..d5d46908cf6e 100644
--- a/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -1,23 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-gw54xx.dtsi"
+#include <dt-bindings/media/tda1997x.h>
 
 / {
 	model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX";
 	compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q";
+
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
+		};
+	};
+};
+
+&i2c3 {
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu2_csi1_mux: endpoint {
+				remote-endpoint = <&ipu2_csi1_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&sw4_reg>;
+		DVDD-supply = <&sw4_reg>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&ipu2_csi1_from_ipu2_csi1_mux {
+	bus-width = <8>;
+};
+
+&ipu2_csi1_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu2_csi1_mux>;
+	bus-width = <8>;
+};
+
+&ipu2_csi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu2_csi1>;
 };
 
 &sata {
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30          0x0001b0b0
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x4001b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu2_csi1: ipu2_csi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__IPU2_CSI1_DATA19    0x1b0b0
+			MX6QDL_PAD_EIM_D16__IPU2_CSI1_DATA18    0x1b0b0
+			MX6QDL_PAD_EIM_D18__IPU2_CSI1_DATA17    0x1b0b0
+			MX6QDL_PAD_EIM_D19__IPU2_CSI1_DATA16    0x1b0b0
+			MX6QDL_PAD_EIM_D20__IPU2_CSI1_DATA15    0x1b0b0
+			MX6QDL_PAD_EIM_D26__IPU2_CSI1_DATA14    0x1b0b0
+			MX6QDL_PAD_EIM_D27__IPU2_CSI1_DATA13    0x1b0b0
+			MX6QDL_PAD_EIM_A17__IPU2_CSI1_DATA12    0x1b0b0
+			MX6QDL_PAD_EIM_D29__IPU2_CSI1_VSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_EB3__IPU2_CSI1_HSYNC     0x1b0b0
+			MX6QDL_PAD_EIM_A16__IPU2_CSI1_PIXCLK    0x1b0b0
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-gw552x.dts b/arch/arm/boot/dts/imx6q-gw552x.dts
index f87a8fa6e04d..c973b7304225 100644
--- a/arch/arm/boot/dts/imx6q-gw552x.dts
+++ b/arch/arm/boot/dts/imx6q-gw552x.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/imx6q-gw553x.dts b/arch/arm/boot/dts/imx6q-gw553x.dts
new file mode 100644
index 000000000000..e9c224cea752
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw553x.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw553x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW553X";
+	compatible = "gw,imx6q-gw553x", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw560x.dts b/arch/arm/boot/dts/imx6q-gw560x.dts
new file mode 100644
index 000000000000..735f2bbf1439
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw560x.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw560x.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW560X";
+	compatible = "gw,imx6q-gw560x", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5903.dts b/arch/arm/boot/dts/imx6q-gw5903.dts
new file mode 100644
index 000000000000..a182e4cb0e6e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5903.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5903.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5903";
+	compatible = "gw,imx6q-gw5903", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts
new file mode 100644
index 000000000000..ca1e2ae3341e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5904.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5904.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5904";
+	compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5907.dts b/arch/arm/boot/dts/imx6q-gw5907.dts
new file mode 100644
index 000000000000..b25526ef5886
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5907.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5907.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
+	compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5910.dts b/arch/arm/boot/dts/imx6q-gw5910.dts
new file mode 100644
index 000000000000..6aafa2fcee08
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5910.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5910.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
+	compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5912.dts b/arch/arm/boot/dts/imx6q-gw5912.dts
new file mode 100644
index 000000000000..4dcbd943cd93
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5912.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5912.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
+	compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-gw5913.dts b/arch/arm/boot/dts/imx6q-gw5913.dts
new file mode 100644
index 000000000000..6f511f1665fd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-gw5913.dtsi"
+
+/ {
+	model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
+	compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
new file mode 100644
index 000000000000..6406ade14f57
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -0,0 +1,382 @@
+/*
+ * Copyright (C) 2015 Lucas Stach <kernel@pengutronix.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+
+/ {
+	model = "Auvidea H100";
+	compatible = "auvidea,h100", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	aliases {
+		rtc0 = &rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	hdmi_osc: hdmi-osc {
+		compatible = "fixed-clock";
+		clock-output-names = "hdmi-osc";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_leds>;
+
+		led0: led-power {
+			label = "power";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led1: led-stream {
+			label = "stream";
+			gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		led2: led-rec {
+			label = "rec";
+			gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_hdmi: regulator-hdmi {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_reg_hdmi>;
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		regulator-name = "V_HDMI";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usbh1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbh1_vbus>;
+		regulator-name = "USB_H1_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_usbotg_vbus>;
+		regulator-name = "USB_OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	sound-sgtl5000 {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "H100 on-board codec";
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-ext-port = <5>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c1>;
+	status = "okay";
+
+	eeprom: 24c02@51 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x51>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_sgtl5000>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	tc358743: tc358743@f {
+		compatible = "toshiba,tc358743";
+		reg = <0x0f>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_h100_tc358743>;
+		clocks = <&hdmi_osc>;
+		clock-names = "refclk";
+		reset-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+		/* IRQ has a wrong pull resistor which renders it useless  */
+
+		port {
+			tc358743_out: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				data-lanes = <1 2 3 4>;
+				clock-lanes = <0>;
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <297000000>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	h100 {
+		pinctrl_h100_hdmi: h100-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_h100_i2c1: h100-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_i2c2: h100-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			>;
+		};
+
+		pinctrl_h100_leds: pinctrl-h100-leds {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b0
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_reg_hdmi: h100-reg-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_sgtl5000: h100-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC		0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD		0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS		0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1		0x130b0
+			>;
+		};
+
+		pinctrl_h100_tc358743: h100-tc358743 {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_uart2: h100-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_h100_usbh1_vbus: hummingboard-usbh1-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usbotg_id: hummingboard-usbotg-id {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			>;
+		};
+
+		pinctrl_h100_usbotg_vbus: hummingboard-usbotg-vbus {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2: h100-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x13059
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2_100mhz: h100-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+
+		pinctrl_h100_usdhc2_200mhz: h100-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1f071
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x1b0b0
+			>;
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port {
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&tc358743_out>;
+			data-lanes = <1 2 3 4>;
+			clock-lanes = <0>;
+			clock-noncontinuous;
+			link-frequencies = /bits/ 64 <297000000>;
+		};
+	};
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	vbus-supply = <&reg_usbh1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_h100_usbotg_id>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_h100_usdhc2>;
+	pinctrl-1 = <&pinctrl_h100_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_h100_usdhc2_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
new file mode 100644
index 000000000000..c51b4e4fd71e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard-emmc-som-v15.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
new file mode 100644
index 000000000000..e4132d62ffa2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard-som-v15.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright (C) 2014 Rabeeh Khoury (rabeeh@solid-run.com)
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,receive-eq-mdB = <3000>;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard.dts b/arch/arm/boot/dts/imx6q-hummingboard.dts
index 1884c16784e2..8c9e94e648a7 100644
--- a/arch/arm/boot/dts/imx6q-hummingboard.dts
+++ b/arch/arm/boot/dts/imx6q-hummingboard.dts
@@ -11,17 +11,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -30,11 +30,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -42,6 +42,8 @@
 /dts-v1/;
 
 #include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
 #include "imx6qdl-hummingboard.dtsi"
 
 / {
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
new file mode 100644
index 000000000000..1998ebfa0fe0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard2-emmc-som-v15.dts
@@ -0,0 +1,63 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
new file mode 100644
index 000000000000..d3ad7329cd6d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard2-som-v15.dts
@@ -0,0 +1,62 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad (1.5som)";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-hummingboard2.dts b/arch/arm/boot/dts/imx6q-hummingboard2.dts
new file mode 100644
index 000000000000..5249f53dcdbc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-hummingboard2.dts
@@ -0,0 +1,61 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-brcm.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-hummingboard2-emmc.dtsi"
+
+/ {
+	model = "SolidRun HummingBoard2 Dual/Quad";
+	compatible = "solidrun,hummingboard2/q", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <9>;
+	fsl,no-spread-spectrum;
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-mipi.dts b/arch/arm/boot/dts/imx6q-icore-mipi.dts
new file mode 100644
index 000000000000..d51745268dbf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-mipi.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2017 Engicam S.r.l.
+ * Copyright (C) 2017 Amarula Solutions B.V.
+ * Author: Jagan Teki <jagan@amarulasolutions.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 1.5 Quad/Dual MIPI Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&mipi_csi {
+	status = "okay";
+};
+
+&ov5640 {
+	status = "okay";
+};
+
+&usdhc3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap10.dts b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
new file mode 100644
index 000000000000..02aca1e28ce3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap10.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "ampire,am-1280800n3tzqw-t00h";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-ofcap12.dts b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
new file mode 100644
index 000000000000..241811c52b62
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-ofcap12.dts
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 12 Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+
+	panel {
+		compatible = "koe,tx31d200vm0baa";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-icore-rqs.dts b/arch/arm/boot/dts/imx6q-icore-rqs.dts
new file mode 100644
index 000000000000..cf6ba724f497
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore-rqs.dts
@@ -0,0 +1,19 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore-rqs.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
+	compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-icore.dts b/arch/arm/boot/dts/imx6q-icore.dts
new file mode 100644
index 000000000000..fe28c3cf54c0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-icore.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-icore.dtsi"
+
+/ {
+	model = "Engicam i.CoreM6 Quad/Dual Starter Kit";
+	compatible = "engicam,imx6-icore", "fsl,imx6q";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c1 {
+	max11801: touchscreen@48 {
+		compatible = "maxim,max11801";
+		reg = <0x48>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: timing0 {
+				clock-frequency = <60000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <30>;
+				hfront-porch = <30>;
+				vback-porch = <5>;
+				vfront-porch = <5>;
+				hsync-len = <64>;
+				vsync-len = <20>;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..4d6a0c3e8455
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kontron-samx6i.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-kontron-samx6i.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Kontron SMARC sAMX6i Quad/Dual";
+	compatible = "kontron,imx6q-samx6i", "fsl,imx6q";
+};
+
+/* Quad/Dual SoMs have 3 chip-select signals */
+&ecspi4 {
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+		   <&gpio3 29 GPIO_ACTIVE_LOW>,
+		   <&gpio3 25 GPIO_ACTIVE_LOW>;
+};
+
+&pinctrl_ecspi4 {
+	fsl,pins = <
+		MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+		MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+		MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+		/* SPI4_IMX_CS2# - connected to internal flash */
+		MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+		/* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */
+		MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+		/* SPI4_CS3# - connected to  SMARC SPI0_CS1# */
+		MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0
+	>;
+};
diff --git a/arch/arm/boot/dts/imx6q-kp-tpc.dts b/arch/arm/boot/dts/imx6q-kp-tpc.dts
new file mode 100644
index 000000000000..50fbf46d17c2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp-tpc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q-kp.dtsi"
+
+/ {
+	model = "Freescale i.MX6 Qwuad K+P TPC Board";
+	compatible = "kiebackpeter,imx6q-tpc", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
new file mode 100644
index 000000000000..5e0ed5560040
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2018
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <250>;
+	};
+
+	beeper {
+		compatible = "pwm-beeper";
+		pwms = <&pwm2 0 500000>;
+	};
+
+	lcd_display: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel: lcd-panel {
+		compatible = "auo,g070vvn01";
+		backlight = <&backlight_lcd>;
+		power-supply = <&reg_display>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-green {
+			label = "led1";
+			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+
+		led-red {
+			label = "led0";
+			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "sgtl5000-supply";
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "display-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb_h1_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6q-sgtl5000-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&codec_dai>;
+		simple-audio-card,frame-master = <&codec_dai>;
+
+		cpu_dai: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		codec_dai: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TCSEL(2) |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	touchscreen@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		irq-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+	};
+
+	ds1307: rtc@32 {
+		compatible = "dallas,ds1307";
+		reg = <0x32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS	0x130b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31   0x1b0b0
+			/* sgtl5000 sys_mclk clock routed to CLKO1 */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC	0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0	0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1	0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2	0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3	0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC	0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0	0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1	0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2	0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3	0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+		>;
+	};
+
+	pinctrl_flexcan1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX        0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX        0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		 >;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_ts: tsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
new file mode 100644
index 000000000000..46a4ddedb423
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2019 Logic PD, Inc.
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6-logicpd-som.dtsi"
+#include "imx6-logicpd-baseboard.dtsi"
+
+/ {
+	model = "Logic PD i.MX6QD SOM-M3";
+	compatible = "logicpd,imx6q-logicpd", "fsl,imx6q";
+
+	backlight: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 20000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+		power-supply = <&reg_lcd>;
+	};
+
+	panel-lvds0 {
+		compatible = "okaya,rs800480t-7x0gp";
+		power-supply = <&reg_lcd_reset>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_lcd: regulator-lcd {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reg>;
+		compatible = "regulator-fixed";
+		regulator-name = "lcd_panel_pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+		startup-delay-us = <500000>;
+	};
+
+	reg_lcd_reset: regulator-lcd-reset {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd_reset>;
+		compatible = "regulator-fixed";
+		regulator-name = "nLCD_RESET";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_lcd>;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_IPU1_DI0_PRE_SEL>,
+			  <&clks IMX6QDL_CLK_IPU2_DI0_PRE_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	touchscreen@26 {
+		compatible = "ilitek,ili2117";
+		reg = <0x26>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupts-extended = <&gpio1 6 IRQ_TYPE_EDGE_RISING>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+};
+
+&pwm3 {
+	status = "okay";
+};
+
+&reg_hdmi {
+	regulator-always-on;	/* Without this, the level shifter on HDMI doesn't turn on */
+};
+
+&iomuxc {
+	pinctrl_lcd_reg: lcdreg {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x100b0	/* R_LCD_PANEL_PWR */
+		>;
+	};
+
+	pinctrl_lcd_reset: lcdreset {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x100b0	/* LCD_nRESET */
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0	/* TOUCH_nPINTDAV */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
new file mode 100644
index 000000000000..2c9961333b0a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -0,0 +1,417 @@
+/*
+ * Copyright (C) 2016 Sergio Prado (sergio.prado@e-labworks.com)
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Embest MarS Board i.MX6Dual";
+	compatible = "embest,imx6q-marsboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led>;
+
+		led-user1 {
+			label = "imx6:green:user1";
+			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-user2 {
+			label = "imx6:green:user2";
+			gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Atheros AR8035 PHY */
+		rgmii_phy: ethernet-phy@4 {
+			reg = <4>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0	/* CAM_MCLK */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000b1	/* CS0 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+			/* GPIO16 -> AR8035 25MHz */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* RGMII_nRST */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x180b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_led: ledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b1	/* LED1 */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x1b0b1	/* LED2 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0	/* USB OTG POWER ENABLE */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0	/* CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1f0b0	/* WP */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17009
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10009
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17009
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17009
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17009
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17009
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17009
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6.dtsi b/arch/arm/boot/dts/imx6q-mba6.dtsi
new file mode 100644
index 000000000000..0d7be4567291
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&ecspi5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi5_mba6x>;
+	cs-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+};
+
+&ethphy {
+	rxdv-skew-ps = <180>;
+	txen-skew-ps = <120>;
+	rxd3-skew-ps = <180>;
+	rxd2-skew-ps = <180>;
+	rxd1-skew-ps = <180>;
+	rxd0-skew-ps = <180>;
+	txd3-skew-ps = <120>;
+	txd2-skew-ps = <0>;
+	txd1-skew-ps = <180>;
+	txd0-skew-ps = <360>;
+	txc-skew-ps = <1860>;
+	rxc-skew-ps = <1860>;
+};
+
+&sata {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_ecspi5_mba6x: ecspi5grp-mba6x {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x1b099
+			MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0xb099
+			MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0xb099
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0xb099 /* eCSPI5 SS0 */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6a.dts b/arch/arm/boot/dts/imx6q-mba6a.dts
new file mode 100644
index 000000000000..349a08605a5e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6a.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6a.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6a.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-a", "tq,mba6a",
+		     "tq,imx6q-tqma6q-a", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-mba6b.dts b/arch/arm/boot/dts/imx6q-mba6b.dts
new file mode 100644
index 000000000000..02c9f3e91b8f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mba6b.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q-tqma6b.dtsi"
+#include "imx6qdl-mba6.dtsi"
+#include "imx6qdl-mba6b.dtsi"
+#include "imx6q-mba6.dtsi"
+
+/ {
+	model = "TQ TQMa6Q on MBa6x";
+	compatible = "tq,imx6q-mba6x-b", "tq,mba6b",
+		     "tq,imx6q-tqma6q-b", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
new file mode 100644
index 000000000000..f08b37010291
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016-2017
+ * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Liebherr (LWN) monitor6 i.MX6 Quad Board";
+	compatible = "lwn,mccmon6", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
+				      10  11  12  13  14  15  16  17  18  19
+				      20  21  22  23  24  25  26  27  28  29
+				      30  31  32  33  34  35  36  37  38  39
+				      40  41  42  43  44  45  46  47  48  49
+				      50  51  52  53  54  55  56  57  58  59
+				      60  61  62  63  64  65  66  67  68  69
+				      70  71  72  73  74  75  76  77  78  79
+				      80  81  82  83  84  85  86  87  88  89
+				      90  91  92  93  94  95  96  97  98  99
+				     100 101 102 103 104 105 106 107 108 109
+				     110 111 112 113 114 115 116 117 118 119
+				     120 121 122 123 124 125 126 127 128 129
+				     130 131 132 133 134 135 136 137 138 139
+				     140 141 142 143 144 145 146 147 148 149
+				     150 151 152 153 154 155 156 157 158 159
+				     160 161 162 163 164 165 166 167 168 169
+				     170 171 172 173 174 175 176 177 178 179
+				     180 181 182 183 184 185 186 187 188 189
+				     190 191 192 193 194 195 196 197 198 199
+				     200 201 202 203 204 205 206 207 208 209
+				     210 211 212 213 214 215 216 217 218 219
+				     220 221 222 223 224 225 226 227 228 229
+				     230 231 232 233 234 235 236 237 238 239
+				     240 241 242 243 244 245 246 247 248 249
+				     250 251 252 253 254 255>;
+		default-brightness-level = <50>;
+		enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_lvds: regulator-lvds {
+		compatible = "regulator-fixed";
+		regulator-name = "lvds_ppen";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lvds>;
+		gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel-lvds0 {
+		compatible = "innolux,g121x1-l03";
+		backlight = <&backlight_lvds>;
+		power-supply = <&reg_lvds>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
+	status = "okay";
+
+	s25sl032p: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <40000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3950000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds0: lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
+	ranges = <0 0 0x08000000 0x08000000>;
+	status = "okay";
+
+	nor@0,0 {
+		compatible = "cfi-flash";
+		reg = <0 0 0x02000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		bank-width = <2>;
+		use-advanced-sector-protection;
+		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+				0x0000c000 0x1404a38e 0x00000000>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_backlight: dispgrp {
+		fsl,pins = <
+			/* BLEN_OUT */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_ecspi3_cs: ecspi3csgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
+		>;
+	};
+
+	pinctrl_ecspi3_flwp: ecspi3flwpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lvds: reqlvdsgrp {
+		fsl,pins = <
+			/* LVDS_PPEN_OUT */
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19         0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_nor: weimnorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B	0xb060
+			MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
+			MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
+			MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
+			MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
+			MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
+			MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
+			MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
+			MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
+			MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
+			MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
+			MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
+			MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
+			MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
+			MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
+			MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
+			MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
+			MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
+			MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
+			MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
+			MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
+			MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
new file mode 100644
index 000000000000..03bec0c53063
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_max.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board";
+	compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
new file mode 100644
index 000000000000..eb4eecb6ed22
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-nitrogen6_som2.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-nitrogen6_som2.dtsi"
+
+/ {
+	model = "Boundary Devices i.MX6 Quad Nitrogen6_SOM2 Board";
+	compatible = "boundary,imx6q-nitrogen6_som2", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
index a57866b2e97e..435445a34ad0 100644
--- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts
+++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts
@@ -1,14 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2012 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -16,8 +10,8 @@
 #include "imx6qdl-nitrogen6x.dtsi"
 
 / {
-	model = "Freescale i.MX6 Quad Nitrogen6x Board";
-	compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q";
+	model = "Boundary Devices i.MX6 Quad Nitrogen6x Board";
+	compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q";
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
new file mode 100644
index 000000000000..ee8c0bd3ecfd
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -0,0 +1,803 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kosagi Novena Dual/Quad";
+	compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 10000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_novena>;
+		power-supply = <&reg_lvds_lcd>;
+		brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <12>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+		user-button {
+			label = "User Button";
+			gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+		};
+
+		lid-event {
+			label = "Lid";
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0>;	/* SW_LID */
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds_novena>;
+
+		led-heartbeat {
+			label = "novena:white:panel";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel: panel {
+		compatible = "innolux,n133hse-ea1";
+		backlight = <&backlight>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_audio_codec: regulator-audio-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "es8328-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		startup-delay-us = <400000>;
+		gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_display: regulator-display {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-display-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+		gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_lcd: regulator-lvds-lcd {
+		compatible = "regulator-fixed";
+		regulator-name = "lcd-lvds-power";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie-bus-power";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sata: regulator-sata {
+		compatible = "regulator-fixed";
+		regulator-name = "sata-power";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <10000>;
+		gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-es8328";
+		model = "imx-audio-es8328";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-amp-supply = <&reg_audio_codec>;
+		jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+		audio-routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Speaker", "audio-amp",
+			"Headphone", "ROUT1",
+			"Headphone", "LOUT1",
+			"LINPUT1", "Mic Jack",
+			"RINPUT1", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <0x1>;
+		mux-ext-port = <0x3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux_novena>;
+	status = "okay";
+};
+
+&ecspi3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3_novena>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet_novena>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			rxc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txen-skew-ps = <0>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <3000>;
+			txd1-skew-ps = <3000>;
+			txd2-skew-ps = <3000>;
+			txd3-skew-ps = <3000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_novena>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_novena>;
+	status = "okay";
+
+	accel: mma8452@1c {
+		compatible = "fsl,mma8452";
+		reg = <0x1c>;
+	};
+
+	rtc: pcf8523@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sbs_battery: bq20z75@b {
+		compatible = "sbs,sbs-battery";
+		reg = <0x0b>;
+		sbs,i2c-retry-count = <50>;
+	};
+
+	touch: stmpe811@44 {
+		compatible = "st,stmpe811";
+		reg = <0x44>;
+		irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe_novena>;
+		vio-supply = <&reg_3p3v>;
+		vcc-supply = <&reg_3p3v>;
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2_novena>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_sw1a: sw1a {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			reg_sw1c: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw2: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3a: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw3b: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_sw4: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_swbst: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_snvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vref: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vgen1: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen2: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			reg_vgen3: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_vgen4: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen5: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			reg_vgen6: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3_novena>;
+	status = "okay";
+
+	codec: es8328@11 {
+		compatible = "everest,es8328";
+		reg = <0x11>;
+		DVDD-supply = <&reg_audio_codec>;
+		AVDD-supply = <&reg_audio_codec>;
+		PVDD-supply = <&reg_audio_codec>;
+		HPVDD-supply = <&reg_audio_codec>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sound_novena>;
+		clocks = <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+				  <&clks IMX6QDL_CLK_CKO1_SEL>,
+				  <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+				  <&clks IMX6QDL_CLK_CKO1>;
+		assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+					 <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+					 <&clks IMX6QDL_CLK_OSC>,
+					 <&clks IMX6QDL_CLK_CKO1_PODF>;
+		assigned-clock-rates = <0 0 722534400 22579200>;
+	};
+};
+
+&kpp {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_kpp_novena>;
+	linux,keymap = <
+		MATRIX_KEY(1, 1, KEY_CONFIG)
+	>;
+	status = "okay";
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "jeida";
+		fsl,data-width = <24>;
+		fsl,panel = <&panel>;
+		status = "okay";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_novena>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&sata {
+	target-supply = <&reg_sata>;
+	fsl,transmit-level-mV = <1025>;
+	fsl,transmit-boost-mdB = <0>;
+	fsl,transmit-atten-16ths = <8>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_novena>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_novena>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_novena>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg_novena>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_swbst>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2_novena>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_novena>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux_novena: audmuxgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_novena: backlightgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3_novena: ecspi3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_enet_novena: enetgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b020
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b028
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b028
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b028
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b028
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b028
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			/* Ethernet reset */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_gpio: fpgagpiogrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1
+		>;
+	};
+
+	pinctrl_fpga_eim: fpgaeimgrp-novena {
+		fsl,pins = <
+			/* FPGA power */
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17		0x1b0b1
+			/* Reset */
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			/* FPGA GPIOs */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0f1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0f1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0f1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0f1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0f1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0f1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0f1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0f1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0f1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0f1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0f1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0f1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0f1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0f1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0f1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0f1
+			MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0f1
+			MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0f1
+			MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0f1
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0f1
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0f1
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb0f1
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0f1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0f1
+			MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B		0xb0f1
+			MX6QDL_PAD_EIM_BCLK__EIM_BCLK		0xb0f1
+		>;
+	};
+
+	pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+		fsl,pins = <
+			/* User button */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			/* PCIe Wakeup */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1f0e0
+			/* Lid switch */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_novena: hdmigrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1_novena: i2c1grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_novena: i2c2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_novena: i2c3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_kpp_novena: kppgrp-novena {
+		fsl,pins = <
+			/* Front panel button */
+			MX6QDL_PAD_KEY_ROW1__KEY_ROW1		0x1b0b1
+			/* Fake column driver, not connected */
+			MX6QDL_PAD_KEY_COL1__KEY_COL1		0x1b0b1
+		>;
+	};
+
+	pinctrl_leds_novena: ledsgrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21		0x1b0b1
+		>;
+	};
+
+	pinctrl_pcie_novena: pciegrp-novena {
+		fsl,pins = <
+			/* Reset */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x1b0b1
+			/* Power On */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1
+			/* Wifi kill */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1
+		>;
+	};
+
+	pinctrl_sata_novena: satagrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b1
+		>;
+	};
+
+	pinctrl_senoko_novena: senokogrp-novena {
+		fsl,pins = <
+			/* Senoko IRQ line */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x13048
+			/* Senoko reset line */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1
+		>;
+	};
+
+	pinctrl_sound_novena: soundgrp-novena {
+		fsl,pins = <
+			/* Audio power regulator */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+			/* Headphone plug */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+		>;
+	};
+
+	pinctrl_stmpe_novena: stmpegrp-novena {
+		fsl,pins = <
+			/* Touchscreen interrupt */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_novena: uart2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_novena: uart3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_novena: uart4grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_novena: usbotggrp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_novena: usdhc2grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			/* Write protect */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+			/* Card detect */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3_novena: usdhc3grp-novena {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
new file mode 100644
index 000000000000..322f071d972f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-emmc.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with eMMC";
+	compatible = "phytec,imx6q-pbac06-emmc", "phytec,imx6q-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
+
+&usdhc4 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
new file mode 100644
index 000000000000..3f13726c8058
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-phytec-mira-rdk-nand.dts
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+#include "imx6qdl-phytec-mira-peb-eval-01.dtsi"
+#include "imx6qdl-phytec-mira-peb-av-02.dtsi"
+#include "imx6qdl-phytec-mira-peb-wlbt-05.dtsi"
+
+/ {
+	model = "PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND";
+	compatible = "phytec,imx6q-pbac06-nand", "phytec,imx6q-pbac06",
+		     "phytec,imx6qdl-pcm058", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart2;
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+};
+
+&gpmi {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c_rtc {
+	status = "okay";
+};
+
+&m25p80 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
index c139ac0ebe15..affe30b02d5a 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/boot/dts/imx6q-phytec-pbab01.dts
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -23,5 +17,5 @@
 };
 
 &sata {
-        status = "okay";
+	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
index cd20d0a948de..500944bd2a05 100644
--- a/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "imx6q.dtsi"
@@ -16,7 +10,8 @@
 	model = "Phytec phyFLEX-i.MX6 Quad";
 	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-pico-dwarf.dts b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
new file mode 100644
index 000000000000..479a63ed42af
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-dwarf.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Dwarf baseboard";
+	compatible = "technexion,imx6q-pico-dwarf", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-hobbit.dts b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
new file mode 100644
index 000000000000..b767131068f5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-hobbit.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-hobbit.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Hobbit baseboard";
+	compatible = "technexion,imx6q-pico-hobbit", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-nymph.dts b/arch/arm/boot/dts/imx6q-pico-nymph.dts
new file mode 100644
index 000000000000..e8ad4c12b263
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-nymph.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and Nymph baseboard";
+	compatible = "technexion,imx6q-pico-nymph", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pico-pi.dts b/arch/arm/boot/dts/imx6q-pico-pi.dts
new file mode 100644
index 000000000000..cc2394ddad6c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pico-pi.dts
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-pico-pi.dtsi"
+
+/ {
+	model = "TechNexion PICO-IMX6 Quad Board and PI baseboard";
+	compatible = "technexion,imx6q-pico-pi", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-pinfunc.h b/arch/arm/boot/dts/imx6q-pinfunc.h
index 9fc6120a1853..e40409d04b97 100644
--- a/arch/arm/boot/dts/imx6q-pinfunc.h
+++ b/arch/arm/boot/dts/imx6q-pinfunc.h
@@ -1,10 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #ifndef __DTS_IMX6Q_PINFUNC_H
@@ -551,6 +547,7 @@
 #define MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS            0x1e0 0x4f4 0x860 0x2 0x0
 #define MX6QDL_PAD_ENET_RXD1__ENET_1588_EVENT3_OUT  0x1e0 0x4f4 0x000 0x4 0x0
 #define MX6QDL_PAD_ENET_RXD1__GPIO1_IO26            0x1e0 0x4f4 0x000 0x5 0x0
+#define MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT        0x1e4 0x4f8 0x000 0x0 0x0
 #define MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0         0x1e4 0x4f8 0x848 0x1 0x1
 #define MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK        0x1e4 0x4f8 0x868 0x2 0x0
 #define MX6QDL_PAD_ENET_RXD0__SPDIF_OUT             0x1e4 0x4f8 0x000 0x3 0x0
diff --git a/arch/arm/boot/dts/imx6q-pistachio.dts b/arch/arm/boot/dts/imx6q-pistachio.dts
new file mode 100644
index 000000000000..bad8d831e64e
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-pistachio.dts
@@ -0,0 +1,695 @@
+/*
+ * Copyright (C) 2017 NutsBoard.Org
+ *
+ * Author: Wig Cheng <onlywig@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6q.dtsi"
+
+/ {
+	model = "NutsBoard i.MX6 Quad Pistachio board";
+	compatible = "nutsboard,imx6q-pistachio", "fsl,imx6q";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	wlan_en_reg: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb_vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+			linux,code = <KEY_POWER>;
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx-sgtl5000",
+			   "fsl,imx-audio-sgtl5000";
+		model = "audio-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+		brightness-levels = <
+			0  /*1  2  3  4  5  6*/  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+		>;
+		default-brightness-level = <94>;
+		status = "okay";
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	ar1021@4d {
+		compatible = "microchip,ar1021-i2c";
+		reg = <0x4d>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0  /*pcie power*/
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x1b0b0   /*LCD power*/
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16	0x1b0b0   /*backlight power*/
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /*SD3 CD pin*/
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /*codec power*/
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22	0x1b0b0 /*touch reset*/
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b01 /*touch irq*/
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07	 0x1b0b0/*backlight pwr*/
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11	0x1b0b0 /*gpio 5V_1*/
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19	0x1b0b0 /*gpio 5V_2*/
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04	0x1b0b0 /*gpio 5V_3*/
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0 /*gpio 5V_4*/
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0 /*AUX_5V_EN*/
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0 /*AUX_5VB_EN*/
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0 /*AUX_3V3_EN*/
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21	0x1b0b0 /*I2C expander pwr*/
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO	0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI	0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK	0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			/* AR8035 reset */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x130b0
+			/* AR8035 interrupt */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+			/* AR8035 pin strapping: IO voltage: pull up */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			/* AR8035 pin strapping: PHYADDR#0: pull down */
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+			/* AR8035 pin strapping: PHYADDR#1: pull down */
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			/* AR8035 pin strapping: MODE#1: pull up */
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			/* AR8035 pin strapping: MODE#3: pull up */
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			/* AR8035 pin strapping: MODE#0: pull down */
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_sgtl5000: i2c1-sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1			0x000b0 /* sys_mclk */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x130b0 /*headphone det*/
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x130b0 /*microphone det*/
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	    0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B	0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B	0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B	0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		 0x15059 /*BT_EN*/
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4		0x17059
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5		0x17059
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6		0x17059
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x15059 /*WL_EN_LDO*/
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x15059 /*WL_EN*/
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x15059 /*WL_IRQ*/
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B	0x1b0b00
+		>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+	fsl,dte-mode;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy1 {
+	fsl,tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	fsl,tx-d-cal = <0x5>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	vmmc-supply = <&wlan_en_reg>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	cap-power-off-card;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <26000000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	wakeup-source;
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&wdog1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
new file mode 100644
index 000000000000..d8fa83effd63
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -0,0 +1,543 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic PRTI6Q board";
+	compatible = "prt,prti6q", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <1>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	can_osc: can-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "regulator-WL12xx";
+		startup-delay-us = <70000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux-ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux-pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>, <&gpio4 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can3>;
+		clocks = <&can_osc>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5000000>;
+	};
+
+	adc@1 {
+		compatible = "ti,adc128s052";
+		reg = <1>;
+		spi-max-frequency = <2000000>;
+		vref-supply = <&reg_3v3>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* can2_l */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can2_h */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+		tcxo-clock-frequency = <19200000>;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b008
+		>;
+	};
+
+	pinctrl_can3: can3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			/* ADC128S022 CS */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T
+			 * configure DDC pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	/* DDC */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_id: usbotgidgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WL12xx IRQ */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-prtwd2.dts b/arch/arm/boot/dts/imx6q-prtwd2.dts
new file mode 100644
index 000000000000..54a57a4548e2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-prtwd2.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2018 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic WD2 board";
+	compatible = "prt,prtwd2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
+	i2c {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4>;
+		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+	status = "okay";
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		pause;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* V in */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* I charge */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* V bus  */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_eth_chg>;
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22	0x1f8b0
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31		0x1f8b0
+		>;
+	};
+
+	pinctrl_usb_eth_chg: usbethchggrp {
+		fsl,pins = <
+			/* USB charging control */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
+			>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index 3c2852b16f78..271f4b2d9b9f 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2014 FEDEVEL, Inc.
  *
  * Author: Robert Nelson <robertcnelson@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6q.dtsi"
@@ -16,14 +12,15 @@
 	model = "Rex Pro i.MX6 Quad Board";
 	compatible = "rex,imx6q-rex-pro", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 };
 
 &ecspi3 {
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf032b";
+	flash: flash@0 {
+		compatible = "sst,sst25vf032b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
index 334b9247e78c..6e981a3e0a83 100644
--- a/arch/arm/boot/dts/imx6q-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 /dts-v1/;
 
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 96e4688be77c..7c6a2f234ccb 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -1,13 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;
@@ -22,3 +17,8 @@
 &sata {
 	status = "okay";
 };
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
index 9cbdfe7a0931..eec944673c0b 100644
--- a/arch/arm/boot/dts/imx6q-sabresd.dts
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -1,14 +1,7 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 /dts-v1/;
 
@@ -23,3 +16,8 @@
 &sata {
 	status = "okay";
 };
+
+&ipu1_csi1_from_mipi_vc1 {
+	clock-lanes = <0>;
+	data-lanes = <1 2>;
+};
diff --git a/arch/arm/boot/dts/imx6q-savageboard.dts b/arch/arm/boot/dts/imx6q-savageboard.dts
new file mode 100644
index 000000000000..717ac62fc2cf
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-savageboard.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-savageboard.dtsi"
+
+/ {
+	model = "Poslab SavageBoard Quad";
+	compatible = "poslab,imx6q-savageboard", "fsl,imx6q";
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-sbc6x.dts b/arch/arm/boot/dts/imx6q-sbc6x.dts
index 86cf09364664..9054c1d58b9d 100644
--- a/arch/arm/boot/dts/imx6q-sbc6x.dts
+++ b/arch/arm/boot/dts/imx6q-sbc6x.dts
@@ -1,8 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2013 Pavel Machek <pavel@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License V2.
  */
 
 /dts-v1/;
@@ -12,7 +10,8 @@
 	model = "MicroSys sbc6x board";
 	compatible = "microsys,sbc6x", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 };
@@ -31,19 +30,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
new file mode 100644
index 000000000000..ff97d22eb09f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-revc-lt2.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+#include "imx6qdl-skov-revc-lt2.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt2", "fsl,imx6q";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001f878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001f878
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts b/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
new file mode 100644
index 000000000000..3e3b36ad362a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-revc-lt6.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+#include "imx6qdl-skov-cpu-revc.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-revc-lt6", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l6wh-rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
new file mode 100644
index 000000000000..a3f247c722b4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-skov-cpu.dtsi"
+
+/ {
+	model = "SKOV IMX6 CPU QuadCore";
+	compatible = "skov,imx6q-skov-reve-mi1010ait-1cp1", "fsl,imx6q";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	panel {
+		compatible = "multi-inno,mi1010ait-1cp";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>,
+				 <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1280>;
+		touchscreen-size-y = <800>;
+		wakeup-source;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x40010878
+			/* external 1 k pull up */
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001F878
+			/* internal 22 k pull up required */
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001F878
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			/* CTP_INT */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+			/* CTP_RST */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+		>;
+	};
+};
+
+&reg_tft_vcom {
+	regulator-min-microvolt = <3160000>;
+	regulator-max-microvolt = <3160000>;
+	voltage-table = <3160000 73>;
+};
diff --git a/arch/arm/boot/dts/imx6q-solidsense.dts b/arch/arm/boot/dts/imx6q-solidsense.dts
new file mode 100644
index 000000000000..0e6a325df363
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-solidsense.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ * Based on dt work by Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-sr-som.dtsi"
+#include "imx6qdl-sr-som-emmc.dtsi"
+#include "imx6qdl-sr-som-ti.dtsi"
+#include "imx6qdl-hummingboard2.dtsi"
+#include "imx6qdl-solidsense.dtsi"
+
+/ {
+	model = "SolidRun SolidSense Dual/Quad (1.5som+emmc)";
+	compatible = "solidrun,solidsense/q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index a43abfa21e33..2f576e2ce73f 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -1,49 +1,6 @@
-/*
- * Copyright 2014 Soeren Moch <smoch@web.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2014 Soeren Moch <smoch@web.de>
 
 /dts-v1/;
 
@@ -59,7 +16,15 @@
 		stdout-path = &uart1;
 	};
 
-	memory {
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		/delete-property/ mmc3;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 
@@ -84,41 +49,32 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		blue {
+		led-blue {
 			label = "blue_status_led";
 			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 			default-state = "keep";
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-		};
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+	};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_5p0v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 
 	sound-sgtl5000 {
@@ -149,9 +105,21 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
 };
 
 &hdmi {
@@ -167,8 +135,8 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	sgtl5000: sgtl5000@0a {
-		clocks = <&clks 201>;
+	sgtl5000: sgtl5000@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_sgtl5000>;
@@ -191,7 +159,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	rtc: ds1307@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1307";
 		reg = <0x68>;
 	};
@@ -200,11 +168,15 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &sata {
+	fsl,transmit-level-mV = <1104>;
+	fsl,transmit-boost-mdB = <3330>;
+	fsl,transmit-atten-16ths = <16>;
+	fsl,receive-eq-mdB = <3000>;
 	status = "okay";
 };
 
@@ -251,8 +223,11 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -260,9 +235,12 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
-	cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
+	no-1-8-v;
 	status = "okay";
 };
 
@@ -270,163 +248,160 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+	voltage-ranges = <3300 3300>;
 	non-removable;
 	no-1-8-v;
 	status = "okay";
 };
 
 &iomuxc {
-	imx6q-tbs2910 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK      0x4001b0a8
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b059
+		>;
+	};
 
-		pinctrl_hdmi: hdmigrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
-			>;
-		};
+	pinctrl_gpio_fan: gpiofangrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
-			>;
-		};
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL        0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA        0x4001b8b1
+		>;
+	};
 
-		pinctrl_ir: irgrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL         0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA         0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL           0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA           0x4001b8b1
+		>;
+	};
 
-		pinctrl_sgtl5000: sgtl5000grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
-			>;
-		};
+	pinctrl_ir: irgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18        0x17059
+		>;
+	};
 
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12        0x17059
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
-			>;
-		};
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD        0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC        0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD        0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS       0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1          0x130b0
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
-				MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
-			>;
-		};
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT     0x13091
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA  0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
-				MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA     0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA     0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
-				MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
-				MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
-			>;
-		};
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID     0x17059
+		>;
+	};
 
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
-				MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
-				MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
-				MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
-				MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
-				MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
-			>;
-		};
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD           0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK           0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0        0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1        0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2        0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02       0x17059
+		>;
 	};
 
-	gpio_fan {
-		pinctrl_gpio_fan: gpiofangrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28        0x130b1
-			>;
-		};
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD           0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK           0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0        0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1        0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2        0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3        0x17059
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00       0x17059
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01       0x17059
+		>;
 	};
 
-	gpio_leds {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02         0x130b1
-			>;
-		};
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD           0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK           0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0        0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1        0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2        0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3        0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4        0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5        0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6        0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7        0x17059
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-tqma6a.dtsi b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
new file mode 100644
index 000000000000..ab4c07c13a13
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tqma6a.dtsi
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6a.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tqma6b.dtsi b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
new file mode 100644
index 000000000000..7224c376c318
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tqma6b.dtsi
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ */
+
+#include "imx6q.dtsi"
+#include "imx6qdl-tqma6b.dtsi"
+#include "imx6qdl-tqma6.dtsi"
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-ts4900.dts b/arch/arm/boot/dts/imx6q-ts4900.dts
new file mode 100644
index 000000000000..dce1e8671ebe
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ts4900.dts
@@ -0,0 +1,59 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts4900.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-4900 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts4900", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-ts7970.dts b/arch/arm/boot/dts/imx6q-ts7970.dts
new file mode 100644
index 000000000000..570bd3c309a6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-ts7970.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-ts7970.dtsi"
+
+/ {
+	model = "Technologic Systems i.MX6 Quad TS-7970 (Default Device Tree)";
+	compatible = "technologic,imx6q-ts7970", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
index b18fae10b2e3..ac3050a835e5 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
@@ -1,81 +1,57 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
 
 / {
 	model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
 	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
 
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-        };
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
 };
 
 &can1 {
@@ -86,14 +62,14 @@
 	xceiver-supply = <&reg_3v3>;
 };
 
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
 &kpp {
 	status = "disabled";
 };
 
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
 &reg_can_xcvr {
 	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
index b58ec9c966c8..4ee860b626ff 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1010.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts
@@ -1,177 +1,54 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
 
 / {
-	model = "Ka-Ro electronics TX6Q-1010 Module";
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
 	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-        };
 };
 
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
+&ipu2 {
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
index 0bb9a9de62a9..a773f252816c 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts
@@ -1,81 +1,57 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
 
 / {
 	model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT";
 	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
 
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			native-mode = <&ET070001DM6>;
-
-			ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-        };
+&backlight {
+	pwms = <&pwm2 0 500000 0>;
+	/delete-property/ turn-on-delay-ms;
 };
 
 &can1 {
@@ -94,30 +70,14 @@
 	status = "disabled";
 };
 
-&iomuxc {
-	imx6qdl-tx6 {
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
-};
-
 &kpp {
 	status = "disabled";
 };
 
+&lcd_panel {
+	compatible = "edt,etm0700g0edh6";
+};
+
 &reg_can_xcvr {
 	status = "disabled";
 };
@@ -134,3 +94,17 @@
 	fsl,wp-controller;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
index b96d80a35d39..0a4daec8d3ad 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1020.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts
@@ -1,175 +1,52 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
 
 / {
 	model = "Ka-Ro electronics TX6Q-1020 Module";
 	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &display;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		power-supply = <&reg_3v3>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	display: display@di0 {
-		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "rgb24";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_disp0_1>;
-		status = "okay";
-
-		port {
-			display0_in: endpoint {
-				remote-endpoint = <&ipu1_di0_disp0>;
-			};
-		};
-
-		display-timings {
-			VGA {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <48>;
-				hsync-len = <96>;
-				hfront-porch = <16>;
-				vback-porch = <31>;
-				vsync-len = <2>;
-				vfront-porch = <12>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETV570 {
-				clock-frequency = <25200000>;
-				hactive = <640>;
-				vactive = <480>;
-				hback-porch = <114>;
-				hsync-len = <30>;
-				hfront-porch = <16>;
-				vback-porch = <32>;
-				vsync-len = <3>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0350 {
-				clock-frequency = <6413760>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <34>;
-				hsync-len = <34>;
-				hfront-porch = <20>;
-				vback-porch = <15>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0430 {
-				clock-frequency = <9009000>;
-				hactive = <480>;
-				vactive = <272>;
-				hback-porch = <2>;
-				hsync-len = <41>;
-				hfront-porch = <2>;
-				vback-porch = <2>;
-				vsync-len = <10>;
-				vfront-porch = <2>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-
-			ET0500 {
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ET0700 { /* same as ET0500 */
-				clock-frequency = <33264000>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <88>;
-				hsync-len = <128>;
-				hfront-porch = <40>;
-				vback-porch = <33>;
-				vsync-len = <2>;
-				vfront-porch = <10>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-
-			ETQ570 {
-				clock-frequency = <6596040>;
-				hactive = <320>;
-				vactive = <240>;
-				hback-porch = <38>;
-				hsync-len = <30>;
-				hfront-porch = <30>;
-				vback-porch = <16>;
-				vsync-len = <3>;
-				vfront-porch = <4>;
-				hsync-active = <0>;
-				vsync-active = <0>;
-				de-active = <1>;
-				pixelclk-active = <0>;
-			};
-		};
-        };
 };
 
 &ds1339 {
@@ -180,31 +57,30 @@
 	status = "disabled";
 };
 
-&iomuxc {
-	imx6qdl-tx6 {
-		pinctrl_usdhc4: usdhc4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
-				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
-				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
-				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
-				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
-				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
-				MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
-			>;
-		};
-	};
-};
-
-&ipu1_di0_disp0 {
-	remote-endpoint = <&display0_in>;
+&ipu2 {
+	status = "disabled";
 };
 
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
 	bus-width = <4>;
+	non-removable;
 	no-1-8-v;
 	fsl,wp-controller;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
new file mode 100644
index 000000000000..9ffbb0fe7df8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1036.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1036.dts b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
new file mode 100644
index 000000000000..cb2fcb4896c6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-1036.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lcd.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1036 Module";
+	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
+};
+
+&ds1339 {
+	status = "disabled";
+};
+
+&gpmi {
+	status = "disabled";
+};
+
+&ipu2 {
+	status = "disabled";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1
+			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
new file mode 100644
index 000000000000..d43a5d8f1749
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1010.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1010/-1030 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
index 88aa1e4c792d..f7b0acb65352 100644
--- a/arch/arm/boot/dts/imx6q-tx6q-1110.dts
+++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts
@@ -1,152 +1,56 @@
 /*
- * Copyright 2014 Lothar Waßmann <LW@KARO-electronics.de>
+ * Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
  *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-tx6.dtsi"
+#include "imx6qdl-tx6-lvds.dtsi"
 
 / {
-	model = "Ka-Ro electronics TX6Q-1110 Module";
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module";
 	compatible = "karo,imx6q-tx6q", "fsl,imx6q";
-
-	aliases {
-		display = &lvds0;
-		lvds0 = &lvds0;
-		lvds1 = &lvds1;
-	};
-
-	backlight0: backlight0 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 0>;
-		power-supply = <&reg_lcd0_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-
-	backlight1: backlight1 {
-		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 500000 0>;
-		power-supply = <&reg_lcd1_pwr>;
-		/*
-		 * a poor man's way to create a 1:1 relationship between
-		 * the PWM value and the actual duty cycle
-		 */
-		brightness-levels = < 0  1  2  3  4  5  6  7  8  9
-				     10 11 12 13 14 15 16 17 18 19
-				     20 21 22 23 24 25 26 27 28 29
-				     30 31 32 33 34 35 36 37 38 39
-				     40 41 42 43 44 45 46 47 48 49
-				     50 51 52 53 54 55 56 57 58 59
-				     60 61 62 63 64 65 66 67 68 69
-				     70 71 72 73 74 75 76 77 78 79
-				     80 81 82 83 84 85 86 87 88 89
-				     90 91 92 93 94 95 96 97 98 99
-				    100>;
-		default-brightness-level = <50>;
-	};
-};
-
-&i2c3 {
-	polytouch1: eeti@04 {
-		compatible = "eeti,egalax_ts";
-		reg = <0x04>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_eeti>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <22 0>;
-		wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-		linux,wakeup;
-	};
-};
-
-&iomuxc {
-	imx6q-tx6q-1110 {
-		pinctrl_eeti: eetigrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
-			>;
-		};
-	};
-};
-
-&kpp {
-	status = "disabled"; /* pad conflict with backlight1 PWM */
 };
 
-&ldb {
-	status = "okay";
-
-	lvds0: lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "okay";
-
-		display-timings {
-			native-mode = <&lvds_timing0>;
-			lvds_timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-
-	lvds1: lvds-channel@1 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
-		status = "disabled";
-
-		display-timings {
-			native-mode = <&lvds_timing1>;
-			lvds_timing1: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
-	};
-};
-
-&pwm1 {
-	status = "okay";
+&ipu2 {
+	status = "disabled";
 };
 
 &sata {
diff --git a/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
new file mode 100644
index 000000000000..387edf2b3f96
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "imx6q-tx6q-1110.dts"
+#include "imx6qdl-tx6-mb7.dtsi"
+
+/ {
+	model = "Ka-Ro electronics TX6Q-1110/-1130 Module on MB7 baseboard";
+};
diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts
index c3e64ff3d544..52e9f4a211d0 100644
--- a/arch/arm/boot/dts/imx6q-udoo.dts
+++ b/arch/arm/boot/dts/imx6q-udoo.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6q.dtsi"
diff --git a/arch/arm/boot/dts/imx6q-utilite-pro.dts b/arch/arm/boot/dts/imx6q-utilite-pro.dts
new file mode 100644
index 000000000000..ad59b23ef27a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-utilite-pro.dts
@@ -0,0 +1,355 @@
+/*
+ * Copyright 2013 CompuLab Ltd.
+ * Copyright 2016 Christopher Spinrath
+ *
+ * Based on the devicetree distributed with the vendor kernel for the
+ * Utilite Pro:
+ *	Copyright 2013 CompuLab Ltd.
+ *	Author: Valentin Raevsky <valentin@compulab.co.il>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/input/input.h>
+#include "imx6q-cm-fx6.dts"
+
+/ {
+	model = "CompuLab Utilite Pro";
+	compatible = "compulab,utilite-pro", "compulab,cm-fx6", "fsl,imx6q";
+
+	aliases {
+		ethernet1 = &eth1;
+		rtc0 = &em3027;
+		rtc1 = &snvs_rtc;
+	};
+
+	encoder {
+		compatible = "ti,tfp410";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				tfp410_in: endpoint {
+					remote-endpoint = <&parallel_display_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				tfp410_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-power {
+			label = "Power Button";
+			gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hpd>;
+		type = "a";
+		ddc-i2c-bus = <&i2c_dvi_ddc>;
+		hpd-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&tfp410_out>;
+			};
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		mux-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c1>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom@50 {
+				compatible = "atmel,24c02";
+				reg = <0x50>;
+				pagesize = <16>;
+			};
+
+			em3027: rtc@56 {
+				compatible = "emmicro,em3027";
+				reg = <0x56>;
+			};
+		};
+
+		i2c_dvi_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	parallel-display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		interface-pix-fmt = "rgb24";
+
+		port@0 {
+			reg = <0>;
+
+			parallel_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_display_out: endpoint {
+				remote-endpoint = <&tfp410_in>;
+			};
+		};
+	};
+};
+
+/*
+ * A single IPU is not able to drive both display interfaces available on the
+ * Utilite Pro at high resolution due to its bandwidth limitation. Since the
+ * tfp410 encoder is wired up to IPU1, sever the link between IPU1 and the
+ * SoC-internal Designware HDMI encoder forcing the latter to be connected to
+ * IPU2 instead of IPU1.
+ */
+/delete-node/&ipu1_di0_hdmi;
+/delete-node/&hdmi_mux_0;
+/delete-node/&ipu1_di1_hdmi;
+/delete-node/&hdmi_mux_1;
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpio_keysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hpd: hpdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1mux: i2c1muxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x38
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA 0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170B9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100B9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170B9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170B9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170B9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170B9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x170F9
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&parallel_display_in>;
+};
+
+&pcie {
+	pcie@0,0 {
+		reg = <0x000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* non-removable i211 ethernet card */
+		eth1: intel,i211@pcie0,0 {
+			reg = <0x010000 0 0 0 0>;
+		};
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	no-1-8-v;
+	broken-cd;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-var-dt6customboard.dts b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
new file mode 100644
index 000000000000..2290c1237634
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-var-dt6customboard.dts
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Support for Variscite DART-MX6 Carrier-board
+ *
+ * Copyright 2017 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-var-dart.dtsi"
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Variscite DART-MX6 Carrier-board";
+	compatible = "variscite,dt6customboard", "fsl,imx6q";
+
+	backlight_lvds: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 50000>;
+		brightness-levels = <0 4 8 16 32 64 128 248>;
+		default-brightness-level = <7>;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		key-back {
+			gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			label = "Key Back";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-home {
+			gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			label = "Key Home";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+
+		key-menu {
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+			label = "Key Menu";
+			linux,input-type = <1>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	panel1: lvds-panel {
+		compatible = "sgd,gktw70sdae4se", "panel-lvds";
+		backlight = <&backlight_lvds>;
+		width-mm = <153>;
+		height-mm = <86>;
+		label = "gktw70sdae4se";
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <32000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hback-porch = <39>;
+			hfront-porch = <39>;
+			vback-porch = <29>;
+			vfront-porch = <13>;
+			hsync-len = <47>;
+			vsync-len = <2>;
+		};
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_usb_h1_vbus: regulator-usbh1vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usbotgvbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "dt6-customboard-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets = "Headphone", "Headphone Jack",
+					    "Line", "Line In";
+		simple-audio-card,routing = "Headphone Jack", "HPLOUT",
+					    "Headphone Jack", "HPROUT",
+					    "LINE1L", "Line In",
+					    "LINE1R", "Line In";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi2>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&tlv320aic3106>;
+			clocks = <&clks IMX6QDL_CLK_CKO>;
+		};
+	};
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
+		   <&gpio4 10 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	status = "okay";
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		touchscreen-inverted-x;
+		touchscreen-inverted-y;
+		wakeup-source;
+	};
+
+	rtc@68 {
+		compatible = "isil,isl12057";
+		reg = <0x68>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usdhc2 {
+	cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-vicut1.dts b/arch/arm/boot/dts/imx6q-vicut1.dts
new file mode 100644
index 000000000000..dd91aff3f9e2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-vicut1.dts
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-vicut1.dtsi"
+#include "imx6qdl-vicut1-12inch.dtsi"
+
+/ {
+	model = "Kverneland UT1Q Board";
+	compatible = "kvg,vicut1q", "fsl,imx6q";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
index 20bf3c282623..f6ccbecff92c 100644
--- a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts
@@ -1,22 +1,19 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6q.dtsi"
 #include "imx6qdl-wandboard-revb1.dtsi"
 
 / {
-	model = "Wandboard i.MX6 Quad Board";
+	model = "Wandboard i.MX6 Quad Board rev B1";
 	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-wandboard-revd1.dts b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
new file mode 100644
index 000000000000..55331021d80c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-wandboard-revd1.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ */
+/dts-v1/;
+#include "imx6q.dtsi"
+#include "imx6qdl-wandboard-revd1.dtsi"
+
+/ {
+	model = "Wandboard i.MX6 Quad Board revD1";
+	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&sata {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts
index 4a8a6ee13e9f..0be548beef86 100644
--- a/arch/arm/boot/dts/imx6q-wandboard.dts
+++ b/arch/arm/boot/dts/imx6q-wandboard.dts
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2013 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 /dts-v1/;
 #include "imx6q.dtsi"
@@ -16,7 +12,8 @@
 	model = "Wandboard i.MX6 Quad Board";
 	compatible = "wand,imx6q-wandboard", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
new file mode 100644
index 000000000000..bddf3822ebf7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp4-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Crux i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-crux", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
new file mode 100644
index 000000000000..ec6651ba4ba2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-yapp4-pegasus.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2021 Y Soft Corporation, a.s.
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6dl-yapp43-common.dtsi"
+
+/ {
+	model = "Y Soft IOTA Pegasus i.MX6Quad board";
+	compatible = "ysoft,imx6q-yapp4-pegasus", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&gpio_oled {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&leds {
+	status = "okay";
+};
+
+&oled_1305 {
+	status = "okay";
+};
+
+&oled_1309 {
+	status = "okay";
+};
+
+&reg_pu {
+	regulator-always-on;
+};
+
+&reg_usb_h1_vbus {
+	status = "okay";
+};
+
+&touchkeys {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbphy2 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6q-zii-rdu2.dts b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
new file mode 100644
index 000000000000..a1c5e69d81ba
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-zii-rdu2.dts
@@ -0,0 +1,20 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2016-2017 Zodiac Inflight Innovations
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include "imx6qdl-zii-rdu2.dtsi"
+
+/ {
+	model = "ZII RDU2 Board";
+	compatible = "zii,imx6q-zii-rdu2", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 399103b8e2c9..df86049a695b 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -1,12 +1,6 @@
-
-/*
- * Copyright 2013 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright 2013 Freescale Semiconductor, Inc.
 
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "imx6q-pinfunc.h"
@@ -14,6 +8,7 @@
 
 / {
 	aliases {
+		ipu1 = &ipu2;
 		spi4 = &ecspi5;
 	};
 
@@ -21,7 +16,7 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		cpu@0 {
+		cpu0: cpu@0 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <0>;
@@ -43,6 +38,7 @@
 				396000	1175000
 			>;
 			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
 			clocks = <&clks IMX6QDL_CLK_ARM>,
 				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
 				 <&clks IMX6QDL_CLK_STEP>,
@@ -53,40 +49,129 @@
 			arm-supply = <&reg_arm>;
 			pu-supply = <&reg_pu>;
 			soc-supply = <&reg_soc>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
-		cpu@1 {
+		cpu1: cpu@1 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <1>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu@2 {
+		cpu2: cpu@2 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <2>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 
-		cpu@3 {
+		cpu3: cpu@3 {
 			compatible = "arm,cortex-a9";
 			device_type = "cpu";
 			reg = <3>;
 			next-level-cache = <&L2>;
+			operating-points = <
+				/* kHz    uV */
+				1200000 1275000
+				996000  1250000
+				852000  1250000
+				792000  1175000
+				396000  975000
+			>;
+			fsl,soc-operating-points = <
+				/* ARM kHz  SOC-PU uV */
+				1200000 1275000
+				996000	1250000
+				852000	1250000
+				792000	1175000
+				396000	1175000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			#cooling-cells = <2>;
+			clocks = <&clks IMX6QDL_CLK_ARM>,
+				 <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+				 <&clks IMX6QDL_CLK_STEP>,
+				 <&clks IMX6QDL_CLK_PLL1_SW>,
+				 <&clks IMX6QDL_CLK_PLL1_SYS>;
+			clock-names = "arm", "pll2_pfd2_396m", "step",
+				      "pll1_sw", "pll1_sys";
+			arm-supply = <&reg_arm>;
+			pu-supply = <&reg_pu>;
+			soc-supply = <&reg_soc>;
 		};
 	};
 
-	soc {
-		ocram: sram@00900000 {
+	soc: soc {
+		ocram: sram@900000 {
 			compatible = "mmio-sram";
 			reg = <0x00900000 0x40000>;
+			ranges = <0 0x00900000 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			clocks = <&clks IMX6QDL_CLK_OCRAM>;
 		};
 
-		aips-bus@02000000 { /* AIPS1 */
-			spba-bus@02000000 {
-				ecspi5: ecspi@02018000 {
+		aips1: bus@2000000 { /* AIPS1 */
+			spba-bus@2000000 {
+				ecspi5: spi@2018000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -100,49 +185,9 @@
 					status = "disabled";
 				};
 			};
-
-			iomuxc: iomuxc@020e0000 {
-				compatible = "fsl,imx6q-iomuxc";
-
-				ipu2 {
-					pinctrl_ipu2_1: ipu2grp-1 {
-						fsl,pins = <
-							MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0x10
-							MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0x10
-							MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0x10
-							MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0x10
-							MX6QDL_PAD_DI0_PIN4__IPU2_DI0_PIN04        0x80000000
-							MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0x10
-							MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0x10
-							MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0x10
-							MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0x10
-							MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0x10
-							MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0x10
-							MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0x10
-							MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0x10
-							MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0x10
-							MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0x10
-							MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0x10
-							MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0x10
-							MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0x10
-							MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0x10
-							MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0x10
-							MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0x10
-							MX6QDL_PAD_DISP0_DAT16__IPU2_DISP0_DATA16  0x10
-							MX6QDL_PAD_DISP0_DAT17__IPU2_DISP0_DATA17  0x10
-							MX6QDL_PAD_DISP0_DAT18__IPU2_DISP0_DATA18  0x10
-							MX6QDL_PAD_DISP0_DAT19__IPU2_DISP0_DATA19  0x10
-							MX6QDL_PAD_DISP0_DAT20__IPU2_DISP0_DATA20  0x10
-							MX6QDL_PAD_DISP0_DAT21__IPU2_DISP0_DATA21  0x10
-							MX6QDL_PAD_DISP0_DAT22__IPU2_DISP0_DATA22  0x10
-							MX6QDL_PAD_DISP0_DAT23__IPU2_DISP0_DATA23  0x10
-						>;
-					};
-				};
-			};
 		};
 
-		sata: sata@02200000 {
+		sata: sata@2200000 {
 			compatible = "fsl,imx6q-ahci";
 			reg = <0x02200000 0x4000>;
 			interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
@@ -153,7 +198,18 @@
 			status = "disabled";
 		};
 
-		ipu2: ipu@02800000 {
+		gpu_vg: gpu@2204000 {
+			compatible = "vivante,gc";
+			reg = <0x02204000 0x4000>;
+			interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
+				 <&clks IMX6QDL_CLK_GPU2D_CORE>;
+			clock-names = "bus", "core";
+			power-domains = <&pd_pu>;
+			#cooling-cells = <2>;
+		};
+
+		ipu2: ipu@2800000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			compatible = "fsl,imx6q-ipu";
@@ -168,10 +224,18 @@
 
 			ipu2_csi0: port@0 {
 				reg = <0>;
+
+				ipu2_csi0_from_mipi_vc2: endpoint {
+					remote-endpoint = <&mipi_vc2_to_ipu2_csi0>;
+				};
 			};
 
 			ipu2_csi1: port@1 {
 				reg = <1>;
+
+				ipu2_csi1_from_ipu2_csi1_mux: endpoint {
+					remote-endpoint = <&ipu2_csi1_mux_to_ipu2_csi1>;
+				};
 			};
 
 			ipu2_di0: port@2 {
@@ -180,20 +244,26 @@
 				reg = <2>;
 
 				ipu2_di0_disp0: endpoint@0 {
+					reg = <0>;
 				};
 
 				ipu2_di0_hdmi: endpoint@1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_2>;
 				};
 
 				ipu2_di0_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_2>;
 				};
 
 				ipu2_di0_lvds0: endpoint@3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_2>;
 				};
 
 				ipu2_di0_lvds1: endpoint@4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_2>;
 				};
 			};
@@ -204,49 +274,170 @@
 				reg = <3>;
 
 				ipu2_di1_hdmi: endpoint@1 {
+					reg = <1>;
 					remote-endpoint = <&hdmi_mux_3>;
 				};
 
 				ipu2_di1_mipi: endpoint@2 {
+					reg = <2>;
+					remote-endpoint = <&mipi_mux_3>;
 				};
 
 				ipu2_di1_lvds0: endpoint@3 {
+					reg = <3>;
 					remote-endpoint = <&lvds0_mux_3>;
 				};
 
 				ipu2_di1_lvds1: endpoint@4 {
+					reg = <4>;
 					remote-endpoint = <&lvds1_mux_3>;
 				};
 			};
 		};
 	};
 
+	capture-subsystem {
+		compatible = "fsl,imx-capture-subsystem";
+		ports = <&ipu1_csi0>, <&ipu1_csi1>, <&ipu2_csi0>, <&ipu2_csi1>;
+	};
+
 	display-subsystem {
 		compatible = "fsl,imx-display-subsystem";
 		ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
 	};
 };
 
+&gpio1 {
+	gpio-ranges = <&iomuxc  0 136  2>, <&iomuxc  2 141 1>, <&iomuxc  3 139 1>,
+		      <&iomuxc  4 142  2>, <&iomuxc  6 140 1>, <&iomuxc  7 144 2>,
+		      <&iomuxc  9 138  1>, <&iomuxc 10 213 3>, <&iomuxc 13  20 1>,
+		      <&iomuxc 14  19  1>, <&iomuxc 15  21 1>, <&iomuxc 16 208 1>,
+		      <&iomuxc 17 207  1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
+		      <&iomuxc 22 116 10>;
+};
+
+&gpio2 {
+	gpio-ranges = <&iomuxc  0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
+		      <&iomuxc 31  44  1>;
+};
+
+&gpio3 {
+	gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
+};
+
+&gpio4 {
+	gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
+};
+
+&gpio5 {
+	gpio-ranges = <&iomuxc 0  85  1>, <&iomuxc  2  34  1>, <&iomuxc 4 53 1>,
+		      <&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
+};
+
+&gpio6 {
+	gpio-ranges = <&iomuxc  0 164 6>, <&iomuxc  6  54 1>, <&iomuxc  7 181  5>,
+		      <&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19  22 12>,
+		      <&iomuxc 31  86 1>;
+};
+
+&gpio7 {
+	gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu1_csi0_mux_from_mipi_vc0: endpoint {
+				remote-endpoint = <&mipi_vc0_to_ipu1_csi0_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu1_csi0_mux_to_ipu1_csi0: endpoint {
+				remote-endpoint = <&ipu1_csi0_from_ipu1_csi0_mux>;
+			};
+		};
+	};
+
+	ipu2_csi1_mux {
+		compatible = "video-mux";
+		mux-controls = <&mux 1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			ipu2_csi1_mux_from_mipi_vc3: endpoint {
+				remote-endpoint = <&mipi_vc3_to_ipu2_csi1_mux>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			ipu2_csi1_mux_from_parallel_sensor: endpoint {
+			};
+		};
+
+		port@2 {
+			reg = <2>;
+
+			ipu2_csi1_mux_to_ipu2_csi1: endpoint {
+				remote-endpoint = <&ipu2_csi1_from_ipu2_csi1_mux>;
+			};
+		};
+	};
+};
+
 &hdmi {
 	compatible = "fsl,imx6q-hdmi";
 
-	port@2 {
-		reg = <2>;
+	ports {
+		port@2 {
+			reg = <2>;
 
-		hdmi_mux_2: endpoint {
-			remote-endpoint = <&ipu2_di0_hdmi>;
+			hdmi_mux_2: endpoint {
+				remote-endpoint = <&ipu2_di0_hdmi>;
+			};
 		};
-	};
 
-	port@3 {
-		reg = <3>;
+		port@3 {
+			reg = <3>;
 
-		hdmi_mux_3: endpoint {
-			remote-endpoint = <&ipu2_di1_hdmi>;
+			hdmi_mux_3: endpoint {
+				remote-endpoint = <&ipu2_di1_hdmi>;
+			};
 		};
 	};
 };
 
+&iomuxc {
+	compatible = "fsl,imx6q-iomuxc";
+};
+
+&ipu1_csi1 {
+	ipu1_csi1_from_mipi_vc1: endpoint {
+		remote-endpoint = <&mipi_vc1_to_ipu1_csi1>;
+	};
+};
+
 &ldb {
 	clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
 		 <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
@@ -293,6 +484,40 @@
 	};
 };
 
+&mipi_csi {
+	port@1 {
+		reg = <1>;
+
+		mipi_vc0_to_ipu1_csi0_mux: endpoint {
+			remote-endpoint = <&ipu1_csi0_mux_from_mipi_vc0>;
+		};
+	};
+
+	port@2 {
+		reg = <2>;
+
+		mipi_vc1_to_ipu1_csi1: endpoint {
+			remote-endpoint = <&ipu1_csi1_from_mipi_vc1>;
+		};
+	};
+
+	port@3 {
+		reg = <3>;
+
+		mipi_vc2_to_ipu2_csi0: endpoint {
+			remote-endpoint = <&ipu2_csi0_from_mipi_vc2>;
+		};
+	};
+
+	port@4 {
+		reg = <4>;
+
+		mipi_vc3_to_ipu2_csi1_mux: endpoint {
+			remote-endpoint = <&ipu2_csi1_mux_from_mipi_vc3>;
+		};
+	};
+};
+
 &mipi_dsi {
 	ports {
 		port@2 {
@@ -313,6 +538,16 @@
 	};
 };
 
+&mux {
+	mux-reg-masks = <0x04 0x00080000>, /* MIPI_IPU1_MUX */
+			<0x04 0x00100000>, /* MIPI_IPU2_MUX */
+			<0x0c 0x0000000c>, /* HDMI_MUX_CTL */
+			<0x0c 0x000000c0>, /* LVDS0_MUX_CTL */
+			<0x0c 0x00000300>, /* LVDS1_MUX_CTL */
+			<0x28 0x00000003>, /* DCIC1_MUX_CTL */
+			<0x28 0x0000000c>; /* DCIC2_MUX_CTL */
+};
+
 &vpu {
 	compatible = "fsl,imx6q-vpu", "cnm,coda960";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
new file mode 100644
index 000000000000..4cc965277c52
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -0,0 +1,1371 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Toradex Apalis iMX6Q/D Module";
+	compatible = "toradex,apalis_imx6q", "fsl,imx6q";
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm4 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	clk_ov5640_osc: clk-ov5640-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di1_disp1>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel_dpi: panel-dpi {
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel_lvds: panel-lvds {
+		compatible = "panel-lvds";
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3";
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "+V3.3_AUDIO";
+	};
+
+	reg_ov5640_1v8_d_o_vdd: regulator-ov5640-1v8-d-o-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "DOVDD/DVDD_1.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_ov5640_2v8_a_vdd: regulator-ov5640-2v8-a-vdd {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <2800000>;
+		regulator-min-microvolt = <2800000>;
+		regulator-name = "AVDD/AFVDD_2.8V";
+		/* Note: The CSI module uses on-board 3.3V_SW supply */
+		vin-supply = <&reg_module_3v3>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbotg_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
+		status = "disabled";
+	};
+
+	/* on module USB hub */
+	reg_usb_host_vbus_hub: regulator-usb-host-vbus-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbhub_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus_hub";
+		startup-delay-us = <2000>;
+		status = "okay";
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio =  <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
+		vin-supply = <&reg_usb_host_vbus_hub>;
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		audio-codec = <&codec>;
+		audio-routing =
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		model = "imx6q-apalis-sgtl5000";
+		mux-ext-port = <4>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		model = "imx-spdif";
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan1_default>;
+	pinctrl-1 = <&pinctrl_flexcan1_sleep>;
+	status = "disabled";
+};
+
+&can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_flexcan2_default>;
+	pinctrl-1 = <&pinctrl_flexcan2_sleep>;
+	status = "disabled";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+/* Apalis SPI1 */
+&ecspi1 {
+	cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "disabled";
+};
+
+/* Apalis SPI2 */
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "disabled";
+};
+
+&gpio1 {
+	gpio-line-names = "MXM3_84",
+			  "MXM3_4",
+			  "MXM3_15/GPIO7",
+			  "MXM3_96",
+			  "MXM3_37",
+			  "",
+			  "MXM3_17/GPIO8",
+			  "MXM3_14",
+			  "MXM3_12",
+			  "MXM3_2",
+			  "MXM3_184",
+			  "MXM3_180",
+			  "MXM3_178",
+			  "MXM3_176",
+			  "MXM3_188",
+			  "MXM3_186",
+			  "MXM3_160",
+			  "MXM3_162",
+			  "MXM3_150",
+			  "MXM3_144",
+			  "MXM3_154",
+			  "MXM3_146",
+			  "",
+			  "",
+			  "MXM3_72";
+};
+
+&gpio2 {
+	gpio-line-names = "MXM3_148",
+			  "MXM3_152",
+			  "MXM3_156",
+			  "MXM3_158",
+			  "MXM3_1/GPIO1",
+			  "MXM3_3/GPIO2",
+			  "MXM3_5/GPIO3",
+			  "MXM3_7/GPIO4",
+			  "MXM3_95",
+			  "MXM3_6",
+			  "MXM3_8",
+			  "MXM3_123",
+			  "MXM3_126",
+			  "MXM3_128",
+			  "MXM3_130",
+			  "MXM3_132",
+			  "MXM3_253",
+			  "MXM3_251",
+			  "MXM3_283",
+			  "MXM3_281",
+			  "MXM3_279",
+			  "MXM3_277",
+			  "MXM3_243",
+			  "MXM3_235",
+			  "MXM3_231",
+			  "MXM3_229",
+			  "MXM3_233",
+			  "MXM3_198",
+			  "MXM3_275",
+			  "MXM3_273",
+			  "MXM3_207",
+			  "MXM3_122";
+};
+
+&gpio3 {
+	gpio-line-names = "MXM3_271",
+			  "MXM3_269",
+			  "MXM3_301",
+			  "MXM3_299",
+			  "MXM3_297",
+			  "MXM3_295",
+			  "MXM3_293",
+			  "MXM3_291",
+			  "MXM3_289",
+			  "MXM3_287",
+			  "MXM3_249",
+			  "MXM3_247",
+			  "MXM3_245",
+			  "MXM3_286",
+			  "MXM3_239",
+			  "MXM3_35",
+			  "MXM3_205",
+			  "MXM3_203",
+			  "MXM3_201",
+			  "MXM3_116",
+			  "MXM3_114",
+			  "MXM3_262",
+			  "MXM3_274",
+			  "MXM3_124",
+			  "MXM3_110",
+			  "MXM3_120",
+			  "MXM3_263",
+			  "MXM3_265",
+			  "",
+			  "MXM3_135",
+			  "MXM3_261",
+			  "MXM3_259";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_194",
+			  "MXM3_136",
+			  "MXM3_134",
+			  "MXM3_140",
+			  "MXM3_138",
+			  "",
+			  "MXM3_220",
+			  "",
+			  "",
+			  "MXM3_18",
+			  "MXM3_16",
+			  "",
+			  "",
+			  "MXM3_214",
+			  "MXM3_216",
+			  "MXM3_164";
+};
+
+&gpio5 {
+	gpio-line-names = "MXM3_159",
+			  "",
+			  "",
+			  "",
+			  "MXM3_257",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_200",
+			  "MXM3_196",
+			  "MXM3_204",
+			  "MXM3_202",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_191",
+			  "MXM3_197",
+			  "MXM3_77",
+			  "MXM3_195",
+			  "MXM3_221",
+			  "MXM3_225",
+			  "MXM3_223",
+			  "MXM3_227",
+			  "MXM3_209",
+			  "MXM3_211",
+			  "MXM3_118",
+			  "MXM3_112",
+			  "MXM3_187",
+			  "MXM3_185";
+};
+
+&gpio6 {
+	gpio-line-names = "MXM3_183",
+			  "MXM3_181",
+			  "MXM3_179",
+			  "MXM3_177",
+			  "MXM3_175",
+			  "MXM3_173",
+			  "MXM3_255",
+			  "MXM3_83",
+			  "MXM3_91",
+			  "MXM3_13/GPIO6",
+			  "MXM3_11/GPIO5",
+			  "MXM3_79",
+			  "",
+			  "",
+			  "MXM3_190",
+			  "MXM3_193",
+			  "MXM3_89";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "MXM3_99",
+			  "MXM3_85",
+			  "MXM3_217",
+			  "MXM3_215";
+};
+
+&gpr {
+	ipu1_csi0_mux {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		port@1 {
+			reg = <1>;
+			ipu1_csi0_mux_from_parallel_sensor: endpoint {
+				remote-endpoint = <&adv7280_to_ipu1_csi0_mux>;
+			};
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@7 {
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+			reg = <7>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc &pinctrl_hdmi_cec>;
+	status = "disabled";
+};
+
+/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		/* These GPIOs are muxed with the iomuxc node */
+		interrupt-parent = <&gpio6>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;	/* MXM3_11 */
+		reg = <0x4a>;
+		reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>;	/* MXM3_13 */
+		status = "disabled";
+	};
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		blocks = <0x5>;
+		id = <0>;
+		interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC conversion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_ts: stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+			status = "disabled";
+		};
+
+		stmpe_adc: stmpe_adc {
+			compatible = "st,stmpe-adc";
+			#io-channel-cells = <1>;
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
+ * board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio3 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	adv_7280: adv7280@21 {
+		compatible = "adi,adv7280";
+		adv,force-bt656-4;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_csi0>;
+		reg = <0x21>;
+		status = "disabled";
+
+		port {
+			adv7280_to_ipu1_csi0_mux: endpoint {
+				bus-width = <8>;
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+			};
+		};
+	};
+
+	ov5640_csi_cam: ov5640_mipi@3c {
+		compatible = "ovti,ov5640";
+		AVDD-supply = <&reg_ov5640_2v8_a_vdd>;
+		DOVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		DVDD-supply = <&reg_ov5640_1v8_d_o_vdd>;
+		clock-names = "xclk";
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cam_mclk>;
+		/* These GPIOs are muxed with the iomuxc node */
+		powerdown-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		reg = <0x3c>;
+		reset-gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&mipi_csi_from_ov5640>;
+			};
+		};
+	};
+};
+
+&ipu1_di1_disp1 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	lvds-channel@0 {
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi_from_ov5640: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart2 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&uart4 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4_dte>;
+	status = "disabled";
+};
+
+&uart5 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5_dte>;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "disabled";
+};
+
+/* MMC1 */
+&usdhc1 {
+	bus-width = <8>;
+	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_usdhc1_8bit &pinctrl_mmc_cd>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "disabled";
+};
+
+/* SD1 */
+&usdhc2 {
+	bus-width = <4>;
+	disable-wp;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
+
+&weim {
+	status = "disabled";
+};
+
+&iomuxc {
+	/* Mux the Apalis GPIOs */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
+		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
+		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
+		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
+		    >;
+
+	pinctrl_apalis_gpio1: apalisgpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio2: apalisgpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio3: apalisgpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio4: apalisgpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio5: apalisgpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio6: apalisgpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio7: apalisgpio7grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b0
+		>;
+	};
+
+	pinctrl_apalis_gpio8: apalisgpio8grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x130b0
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x00b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT6__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_CSI0_DAT5__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_CSI0_DAT4__ECSPI1_SCLK 0x100b1
+			/* SPI1 cs */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			/* SPI2 cs */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* Ethernet PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
+			/* Ethernet PHY interrupt */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1_default: flexcan1defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_sleep: flexcan1slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0
+		>;
+	};
+
+	pinctrl_flexcan2_default: flexcan2defgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+	pinctrl_flexcan2_sleep: flexcan2slpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio1io04grp {
+		fsl,pins = <
+			/* Power button */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D16__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x4001b8b1
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* parallel camera */
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0xb0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0xb0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0xb0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0xb0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0xb0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0xb0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0xb0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0xb0b1
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0xb0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0xb0b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__IPU1_DI1_DISP_CLK	0x61
+			/* DE */
+			MX6QDL_PAD_EIM_DA10__IPU1_DI1_PIN15	0x61
+			/* HSync */
+			MX6QDL_PAD_EIM_DA11__IPU1_DI1_PIN02	0x61
+			/* VSync */
+			MX6QDL_PAD_EIM_DA12__IPU1_DI1_PIN03	0x61
+			MX6QDL_PAD_EIM_DA9__IPU1_DISP1_DATA00	0x61
+			MX6QDL_PAD_EIM_DA8__IPU1_DISP1_DATA01	0x61
+			MX6QDL_PAD_EIM_DA7__IPU1_DISP1_DATA02	0x61
+			MX6QDL_PAD_EIM_DA6__IPU1_DISP1_DATA03	0x61
+			MX6QDL_PAD_EIM_DA5__IPU1_DISP1_DATA04	0x61
+			MX6QDL_PAD_EIM_DA4__IPU1_DISP1_DATA05	0x61
+			MX6QDL_PAD_EIM_DA3__IPU1_DISP1_DATA06	0x61
+			MX6QDL_PAD_EIM_DA2__IPU1_DISP1_DATA07	0x61
+			MX6QDL_PAD_EIM_DA1__IPU1_DISP1_DATA08	0x61
+			MX6QDL_PAD_EIM_DA0__IPU1_DISP1_DATA09	0x61
+			MX6QDL_PAD_EIM_EB1__IPU1_DISP1_DATA10	0x61
+			MX6QDL_PAD_EIM_EB0__IPU1_DISP1_DATA11	0x61
+			MX6QDL_PAD_EIM_A17__IPU1_DISP1_DATA12	0x61
+			MX6QDL_PAD_EIM_A18__IPU1_DISP1_DATA13	0x61
+			MX6QDL_PAD_EIM_A19__IPU1_DISP1_DATA14	0x61
+			MX6QDL_PAD_EIM_A20__IPU1_DISP1_DATA15	0x61
+			MX6QDL_PAD_EIM_A21__IPU1_DISP1_DATA16	0x61
+			MX6QDL_PAD_EIM_A22__IPU1_DISP1_DATA17	0x61
+			MX6QDL_PAD_EIM_A23__IPU1_DISP1_DATA18	0x61
+			MX6QDL_PAD_EIM_A24__IPU1_DISP1_DATA19	0x61
+			MX6QDL_PAD_EIM_D31__IPU1_DISP1_DATA20	0x61
+			MX6QDL_PAD_EIM_D30__IPU1_DISP1_DATA21	0x61
+			MX6QDL_PAD_EIM_D26__IPU1_DISP1_DATA22	0x61
+			MX6QDL_PAD_EIM_D27__IPU1_DISP1_DATA23	0x61
+		>;
+	};
+
+	pinctrl_ipu2_vdac: ipu2vdacgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU2_DI0_DISP_CLK 0xd1
+			MX6QDL_PAD_DI0_PIN15__IPU2_DI0_PIN15       0xd1
+			MX6QDL_PAD_DI0_PIN2__IPU2_DI0_PIN02        0xd1
+			MX6QDL_PAD_DI0_PIN3__IPU2_DI0_PIN03        0xd1
+			MX6QDL_PAD_DISP0_DAT0__IPU2_DISP0_DATA00   0xf9
+			MX6QDL_PAD_DISP0_DAT1__IPU2_DISP0_DATA01   0xf9
+			MX6QDL_PAD_DISP0_DAT2__IPU2_DISP0_DATA02   0xf9
+			MX6QDL_PAD_DISP0_DAT3__IPU2_DISP0_DATA03   0xf9
+			MX6QDL_PAD_DISP0_DAT4__IPU2_DISP0_DATA04   0xf9
+			MX6QDL_PAD_DISP0_DAT5__IPU2_DISP0_DATA05   0xf9
+			MX6QDL_PAD_DISP0_DAT6__IPU2_DISP0_DATA06   0xf9
+			MX6QDL_PAD_DISP0_DAT7__IPU2_DISP0_DATA07   0xf9
+			MX6QDL_PAD_DISP0_DAT8__IPU2_DISP0_DATA08   0xf9
+			MX6QDL_PAD_DISP0_DAT9__IPU2_DISP0_DATA09   0xf9
+			MX6QDL_PAD_DISP0_DAT10__IPU2_DISP0_DATA10  0xf9
+			MX6QDL_PAD_DISP0_DAT11__IPU2_DISP0_DATA11  0xf9
+			MX6QDL_PAD_DISP0_DAT12__IPU2_DISP0_DATA12  0xf9
+			MX6QDL_PAD_DISP0_DAT13__IPU2_DISP0_DATA13  0xf9
+			MX6QDL_PAD_DISP0_DAT14__IPU2_DISP0_DATA14  0xf9
+			MX6QDL_PAD_DISP0_DAT15__IPU2_DISP0_DATA15  0xf9
+		>;
+	};
+
+	pinctrl_mmc_cd: mmccdgrp {
+		fsl,pins = <
+			 /* MMC1 CD */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x000b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: regusbhpwrgrp {
+		fsl,pins = <
+			/* USBH_EN */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbhub_pwr: regusbhubpwrgrp {
+		fsl,pins = <
+			/* USBH_HUB_EN */
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_regulator_usbotg_pwr: regusbotgpwrgrp {
+		fsl,pins = <
+			/* USBO1 power en */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x0f058
+		>;
+	};
+
+	pinctrl_reset_moci: resetmocigrp {
+		fsl,pins = <
+			/* RESET_MOCI control */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0f058
+		>;
+	};
+
+	pinctrl_sd_cd: sdcdgrp {
+		fsl,pins = <
+			/* SD1 CD */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x000b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__CCM_CLKO1	0x130b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN  0x1b0b0
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: touchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2_dce: uart2dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4_dce: uart4dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart4_dte: uart4dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5_dce: uart5dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart5_dte: uart5dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_4bit: usdhc1-4bitgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_8bit: usdhc1-8bitgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__SD1_DATA4 0x17071
+			MX6QDL_PAD_NANDF_D1__SD1_DATA5 0x17071
+			MX6QDL_PAD_NANDF_D2__SD1_DATA6 0x17071
+			MX6QDL_PAD_NANDF_D3__SD1_DATA7 0x17071
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17071
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-apf6.dtsi b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
index 1ebf29f43a24..b78ed7974ea9 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6.dtsi
@@ -1,66 +1,56 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
+/ {
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_3p3v>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <15>;
+		power-off-delay-us = <70>;
+	};
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
+	phy-handle = <&ethphy1>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			status = "okay";
+		};
+	};
 };
 
 /* Bluetooth */
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -68,6 +58,12 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	cap-power-off-card;
+	keep-power-in-suspend;
 	non-removable;
 	status = "okay";
 
@@ -94,65 +90,63 @@
 };
 
 &iomuxc {
-	apf6 {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x130b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x13030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1f030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1f030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
-				MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
-				MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
-				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
-			>;
-		};
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b0
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b0
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b0
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x130b0 /* BT_EN */
+		>;
+	};
 
-		pinctrl_usdhc1: usdhc1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
-				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x1b0b0 /* WL_EN */
-				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x1b0b0 /* WL_IRQ */
-			>;
-		};
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17059
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08	0x130b0 /* WL_EN */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10	0x130b0 /* WL_IRQ */
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
-				MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
-				MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
-				MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
-				MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
-			>;
-		};
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
index e26ebeb5b45c..2577eb4f535a 100644
--- a/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
@@ -1,49 +1,6 @@
-/*
- * Copyright 2015 Armadeus Systems
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of
- *     the License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2015 Armadeus Systems <support@armadeus.com>
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -54,35 +11,37 @@
 		stdout-path = &uart4;
 	};
 
-	display@di0 {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 191000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_5v>;
+	};
+
+	disp0 {
 		compatible = "fsl,imx-parallel-display";
-		interface-pix-fmt = "bgr666";
 		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_ipu1_disp1>;
-
-		display-timings {
-			lw700 {
-				clock-frequency = <33000033>;
-				hactive = <800>;
-				vactive = <480>;
-				hback-porch = <96>;
-				hfront-porch = <96>;
-				vback-porch = <20>;
-				vfront-porch = <21>;
-				hsync-len = <64>;
-				vsync-len = <4>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-				de-active = <1>;
-				pixelclk-active = <1>;
-			};
-		};
+		pinctrl-0 = <&pinctrl_ipu1_disp0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
 
-		port {
 			display_in: endpoint {
 				remote-endpoint = <&ipu1_di0_disp0>;
 			};
 		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
 	};
 
 	gpio-keys {
@@ -94,7 +53,7 @@
 			label = "User button";
 			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_MISC>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 	};
 
@@ -111,32 +70,41 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
+	panel {
+		compatible = "armadeus,st0700-adapt";
+		power-supply = <&reg_3p3v>;
+		backlight = <&backlight>;
 
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
 		};
+	};
 
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_5v>;
+	};
 
-		reg_usb_otg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 
 	sound {
@@ -170,13 +138,13 @@
 &can2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_5v>;
 	status = "okay";
 };
 
 &ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
-	fsl,spi-num-chipselects = <3>;
 	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>,
 		   <&gpio4 10 GPIO_ACTIVE_LOW>,
 		   <&gpio4 11 GPIO_ACTIVE_LOW>;
@@ -210,13 +178,18 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
+
+	rtc@6f {
+		compatible = "microchip,mcp7940x";
+		reg = <0x6f>;
+	};
 };
 
 &i2c3 {
@@ -233,11 +206,12 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio6 2 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio6 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
@@ -254,7 +228,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3 &pinctrl_gsm>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -266,7 +240,7 @@
 };
 
 &usbh1 {
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&reg_5v>;
 	phy_type = "utmi";
 	status = "okay";
 };
@@ -302,178 +276,176 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpios>;
 
-	apf6dev {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
-				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
 
-		pinctrl_ecspi1: ecspi1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
-				MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
-				MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
-				MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
-				MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
-				MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
-			>;
-		};
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1
+			MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1
+			MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09  0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11  0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10  0x1b0b0
+		>;
+	};
 
-		pinctrl_flexcan2: flexcan2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
-			>;
-		};
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
 
-		pinctrl_gpio_keys: gpiokeysgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
-			>;
-		};
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+		>;
+	};
 
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x130b0
+		>;
+	};
 
-		pinctrl_gpios: gpiosgrp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
-				MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
-				MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 	0x100b1
-				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 	0x100b1
-				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 	0x100b1
-				MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 	0x100b1
-				MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 	0x100b1
-				MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 	0x100b1
-				MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21  	0x100b1
-			>;
-		};
+	pinctrl_gpios: gpiosgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x100b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x100b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x100b1
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x100b1
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x100b1
+		>;
+	};
 
-		pinctrl_gsm: gsmgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
-			>;
-		};
+	pinctrl_gsm: gsmgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x130b0 /* GSM_POKIN */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x130b0 /* GSM_PWR_EN */
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
-				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+		>;
+	};
 
-		pinctrl_ipu1_disp1: ipu1disp1grp {
-			fsl,pins = <
-				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
-				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
-				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
-				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
-				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
-				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
-				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
-				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
-				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
-				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
-				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
-				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
-				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
-				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
-				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
-				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
-				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
-				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
-				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
-				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
-				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
-				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
-			>;
-		};
+	pinctrl_ipu1_disp0: ipu1disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x100b1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x100b1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x100b1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x100b1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x100b1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x100b1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x100b1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x100b1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x100b1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x100b1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x100b1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x100b1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x100b1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x100b1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x100b1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x100b1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x100b1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x100b1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x100b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x130b0
+		>;
+	};
 
-		pinctrl_pwm3: pwm3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-			>;
-		};
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b0
+		>;
+	};
 
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
-				MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
-			>;
-		};
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B   0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b0
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b0
+		>;
+	};
 
-		pinctrl_uart4: uart4grp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
-			>;
-		};
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b0
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
-			>;
-		};
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1b0b0
+		>;
+	};
 
-		pinctrl_usdhc2: usdhc2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
-				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
-				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-			>;
-		};
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+		>;
+	};
 
-		pinctrl_spdif: spdifgrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
-			>;
-		};
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+		>;
+	};
 
-		pinctrl_touchscreen: touchscreengrp {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
-			>;
-		};
+	pinctrl_touchscreen: touchscreengrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e6d9195a1da7..baa197c90060 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -1,59 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * support fot the imx6 based aristainetos board
  *
  * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_2p5v: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
 
-		reg_3p3v: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
 
-		reg_usbh1_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_usbotg_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
 
@@ -100,16 +91,15 @@
 };
 
 &ecspi4 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 20 0>;
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -119,7 +109,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -143,14 +133,14 @@
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart4>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
 &uart5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart5>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -173,7 +163,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -181,7 +171,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index 1d85de2befb3..6b64b2fc3995 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -12,17 +12,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -31,11 +31,11 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
@@ -52,46 +52,42 @@
 		enable-gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-
-		reg_2p5v: 2p5v {
-			compatible = "regulator-fixed";
-			regulator-name = "2P5V";
-			regulator-min-microvolt = <2500000>;
-			regulator-max-microvolt = <2500000>;
-			regulator-always-on;
-		};
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_usbh1_vbus: regulator-usbh1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_usbotg_vbus: regulator-usbotg-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_aristainetos2_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
 	};
 };
 
@@ -114,34 +110,31 @@
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <3>;
-	cs-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH
-		    &gpio4 10 GPIO_ACTIVE_HIGH
-		    &gpio4 11 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW
+		    &gpio4 10 GPIO_ACTIVE_LOW
+		    &gpio4 11 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH &gpio2 27 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW &gpio2 27 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 };
 
 &ecspi4 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
+	cs-gpios = <&gpio3 29 GPIO_ACTIVE_LOW &gpio5 2 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi4>;
 	status = "okay";
 
-	flash: m25p80@1 {
+	flash: flash@1 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "micron,n25q128a11";
+		compatible = "micron,n25q128a11", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <1>;
 	};
@@ -161,112 +154,112 @@
 		regulators {
 			bcore1 {
 				regulator-name = "bcore1";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bcore2 {
 				regulator-name = "bcore2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bpro {
 				regulator-name = "bpro";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bperi {
 				regulator-name = "bperi";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bmem {
 				regulator-name = "bmem";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo2 {
 				regulator-name = "ldo2";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1800000>;
 			};
 
 			ldo3 {
 				regulator-name = "ldo3";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo4 {
 				regulator-name = "ldo4";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo5 {
 				regulator-name = "ldo5";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo6 {
 				regulator-name = "ldo6";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo7 {
 				regulator-name = "ldo7";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo8 {
 				regulator-name = "ldo8";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo9 {
 				regulator-name = "ldo9";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo10 {
 				regulator-name = "ldo10";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			ldo11 {
 				regulator-name = "ldo11";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <3300000>;
 			};
 
 			bio {
 				regulator-name = "bio";
-				regulator-always-on = <1>;
+				regulator-always-on;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 			};
@@ -323,12 +316,22 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_HIGH>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio7 18 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &gpmi {
@@ -338,11 +341,12 @@
 };
 
 &pcie {
-	reset-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio2 16 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -351,7 +355,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -364,7 +368,7 @@
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
-	fsl,uart-has-rtscts;
+	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -392,7 +396,7 @@
 &usdhc1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
-	cd-gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	no-1-8-v;
 	status = "okay";
 };
@@ -400,7 +404,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
 	no-1-8-v;
 	status = "okay";
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
new file mode 100644
index 000000000000..570995707504
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -0,0 +1,1309 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2014-2022 Toradex
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Toradex Colibri iMX6DL/S Module";
+	compatible = "toradex,colibri_imx6dl", "fsl,imx6dl";
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 45 63 88 119 158 203 255>;
+		default-brightness-level = <4>;
+		enable-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* Colibri BL_ON */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_bl_on>;
+		power-supply = <&reg_module_3v3>;
+		pwms = <&pwm3 0 5000000 PWM_POLARITY_INVERTED>;
+		status = "disabled";
+	};
+
+	extcon_usbc_det: usbc-det {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; /* SODIMM 137 / USBC_DET */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbc_det>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-wakeup {
+			debounce-interval = <10>;
+			gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>; /* SODIMM 45 */
+			label = "Wake-Up";
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	panel_dpi: panel-dpi {
+		/*
+		 * edt,et057090dhu: EDT 5.7" LCD TFT
+		 * edt,et070080dh6: EDT 7.0" LCD TFT
+		 */
+		compatible = "edt,et057090dhu";
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	reg_module_3v3: regulator-module-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_module_3v3_audio: regulator-module-3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_AUDIO";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_host_vbus: regulator-usb-host-vbus {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>; /* SODIMM 129 / USBH_PEN */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regulator_usbh_pwr>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "usb_host_vbus";
+		status = "disabled";
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT",
+			"LINE_IN", "Line In Jack",
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias";
+		model = "imx6dl-colibri-sgtl5000";
+		mux-int-port = <1>;
+		mux-ext-port = <5>;
+		ssi-controller = <&ssi1>;
+	};
+
+	/* Optional S/PDIF in on SODIMM 88 and out on SODIMM 90, 137 or 168 */
+	sound_spdif: sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+		model = "imx-spdif";
+		status = "disabled";
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux &pinctrl_mic_gnd>;
+	status = "okay";
+};
+
+/* Optional on SODIMM 55/63 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "disabled";
+};
+
+/* Optional on SODIMM 178/188 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "disabled";
+};
+
+&clks {
+	fsl,pmic-stby-poweroff;
+};
+
+/* Colibri SSP */
+&ecspi4 {
+	cs-gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	status = "disabled";
+};
+
+&fec {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			reg = <0>;
+			micrel,led-mode = <0>;
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names = "",
+			  "SODIMM_67",
+			  "SODIMM_180",
+			  "SODIMM_196",
+			  "SODIMM_174",
+			  "SODIMM_176",
+			  "SODIMM_194",
+			  "SODIMM_55",
+			  "SODIMM_63",
+			  "SODIMM_28",
+			  "SODIMM_93",
+			  "SODIMM_69",
+			  "SODIMM_99",
+			  "SODIMM_130",
+			  "SODIMM_106",
+			  "SODIMM_98",
+			  "SODIMM_192",
+			  "SODIMM_49",
+			  "SODIMM_190",
+			  "SODIMM_51",
+			  "SODIMM_47",
+			  "SODIMM_53",
+			  "",
+			  "SODIMM_22";
+};
+
+&gpio2 {
+	gpio-line-names = "SODIMM_132",
+			  "SODIMM_134",
+			  "SODIMM_135",
+			  "SODIMM_133",
+			  "SODIMM_102",
+			  "SODIMM_43",
+			  "SODIMM_127",
+			  "SODIMM_37",
+			  "SODIMM_104",
+			  "SODIMM_59",
+			  "SODIMM_30",
+			  "SODIMM_100",
+			  "SODIMM_38",
+			  "SODIMM_34",
+			  "SODIMM_32",
+			  "SODIMM_36",
+			  "SODIMM_59",
+			  "SODIMM_67",
+			  "SODIMM_97",
+			  "SODIMM_79",
+			  "SODIMM_103",
+			  "SODIMM_101",
+			  "SODIMM_45",
+			  "SODIMM_105",
+			  "SODIMM_107",
+			  "SODIMM_91",
+			  "SODIMM_89",
+			  "SODIMM_150",
+			  "SODIMM_126",
+			  "SODIMM_128",
+			  "",
+			  "SODIMM_94";
+};
+
+&gpio3 {
+	gpio-line-names = "SODIMM_111",
+			  "SODIMM_113",
+			  "SODIMM_115",
+			  "SODIMM_117",
+			  "SODIMM_119",
+			  "SODIMM_121",
+			  "SODIMM_123",
+			  "SODIMM_125",
+			  "SODIMM_110",
+			  "SODIMM_112",
+			  "SODIMM_114",
+			  "SODIMM_116",
+			  "SODIMM_118",
+			  "SODIMM_120",
+			  "SODIMM_122",
+			  "SODIMM_124",
+			  "",
+			  "SODIMM_96",
+			  "SODIMM_77",
+			  "SODIMM_25",
+			  "SODIMM_27",
+			  "SODIMM_88",
+			  "SODIMM_90",
+			  "SODIMM_31",
+			  "SODIMM_23",
+			  "SODIMM_29",
+			  "SODIMM_71",
+			  "SODIMM_73",
+			  "SODIMM_92",
+			  "SODIMM_81",
+			  "SODIMM_131",
+			  "SODIMM_129";
+};
+
+&gpio4 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_168",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_184",
+			  "SODIMM_186",
+			  "HDMI_15",
+			  "HDMI_16",
+			  "SODIMM_178",
+			  "SODIMM_188",
+			  "SODIMM_56",
+			  "SODIMM_44",
+			  "SODIMM_68",
+			  "SODIMM_82",
+			  "SODIMM_24",
+			  "SODIMM_76",
+			  "SODIMM_70",
+			  "SODIMM_60",
+			  "SODIMM_58",
+			  "SODIMM_78",
+			  "SODIMM_72",
+			  "SODIMM_80",
+			  "SODIMM_46",
+			  "SODIMM_62",
+			  "SODIMM_48",
+			  "SODIMM_74";
+};
+
+&gpio5 {
+	gpio-line-names = "SODIMM_95",
+			  "",
+			  "SODIMM_86",
+			  "",
+			  "SODIMM_65",
+			  "SODIMM_50",
+			  "SODIMM_52",
+			  "SODIMM_54",
+			  "SODIMM_66",
+			  "SODIMM_64",
+			  "SODIMM_57",
+			  "SODIMM_61",
+			  "SODIMM_136",
+			  "SODIMM_138",
+			  "SODIMM_140",
+			  "SODIMM_142",
+			  "SODIMM_144",
+			  "SODIMM_146",
+			  "SODIMM_172",
+			  "SODIMM_170",
+			  "SODIMM_149",
+			  "SODIMM_151",
+			  "SODIMM_153",
+			  "SODIMM_155",
+			  "SODIMM_157",
+			  "SODIMM_159",
+			  "SODIMM_161",
+			  "SODIMM_163",
+			  "SODIMM_33",
+			  "SODIMM_35",
+			  "SODIMM_165",
+			  "SODIMM_167";
+};
+
+&gpio6 {
+	gpio-line-names = "SODIMM_169",
+			  "SODIMM_171",
+			  "SODIMM_173",
+			  "SODIMM_175",
+			  "SODIMM_177",
+			  "SODIMM_179",
+			  "SODIMM_85",
+			  "SODIMM_166",
+			  "SODIMM_160",
+			  "SODIMM_162",
+			  "SODIMM_158",
+			  "SODIMM_164",
+			  "",
+			  "",
+			  "SODIMM_156",
+			  "SODIMM_75",
+			  "SODIMM_154",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_152";
+};
+
+&gpio7 {
+	gpio-line-names = "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "",
+			  "SODIMM_19",
+			  "SODIMM_21",
+			  "",
+			  "SODIMM_137";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_ddc>;
+	status = "disabled";
+};
+
+/*
+ * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and
+ * touch screen controller
+ */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		fsl,pmic-stby-poweroff;
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1875000>;
+				regulator-min-microvolt = <300000>;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1975000>;
+				regulator-min-microvolt = <400000>;
+			};
+
+			swbst_reg: swbst {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <5150000>;
+				regulator-min-microvolt = <5000000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3000000>;
+				regulator-min-microvolt = <1000000>;
+			};
+
+			vref_reg: vrefddr {
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			/* vgen1: unused */
+
+			vgen2_reg: vgen2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1550000>;
+				regulator-min-microvolt = <800000>;
+			};
+
+			/*
+			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
+			 * the i.MX 6 NVCC_SD1.
+			 */
+			vgen3_reg: vgen3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1800000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+			};
+		};
+	};
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		lrclk-strength = <3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&reg_module_3v3_audio>;
+		VDDIO-supply = <&reg_module_3v3>;
+		VDDD-supply = <&vgen4_reg>;
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		blocks = <0x5>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio6>;
+		interrupt-controller;
+		id = <0>;
+		irq-trigger = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch_int>;
+		reg = <0x41>;
+		/* 3.25 MHz ADC clock speed */
+		st,adc-freq = <1>;
+		/* 12-bit ADC */
+		st,mod-12b = <1>;
+		/* internal ADC reference */
+		st,ref-sel = <0>;
+		/* ADC converstion time: 80 clocks */
+		st,sample-time = <4>;
+
+		stmpe_ts: stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+			status = "disabled";
+		};
+
+		stmpe_adc: stmpe_adc {
+			compatible = "st,stmpe-adc";
+			/* forbid to use ADC channels 3-0 (touch) */
+			st,norequest-mask = <0x0F>;
+		};
+	};
+};
+
+/*
+ * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
+ */
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "disabled";
+
+	atmel_mxt_ts: touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		interrupt-parent = <&gpio2>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;	/* SODIMM 107 */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_atmel_conn>;
+		reg = <0x4a>;
+		reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;	/* SODIMM 106 */
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+/* Colibri PWM<B> */
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "disabled";
+};
+
+/* Colibri PWM<D> */
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "disabled";
+};
+
+/* Colibri PWM<A> */
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "disabled";
+};
+
+/* Colibri PWM<C> */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "disabled";
+};
+
+/* Optional S/PDIF out on SODIMM 137 */
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+/* Colibri UART_A */
+&uart1 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_dte &pinctrl_uart1_ctrl>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_B */
+&uart2 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2_dte>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+/* Colibri UART_C */
+&uart3 {
+	fsl,dte-mode;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_dte>;
+	status = "disabled";
+};
+
+/* Colibri USBH */
+&usbh1 {
+	vbus-supply = <&reg_usb_host_vbus>;
+};
+
+/* Colibri USBC */
+&usbotg {
+	dr_mode = "otg";
+	extcon = <0>, <&extcon_usbc_det>;
+	status = "disabled";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	cd-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* MMCD */
+	bus-width = <4>;
+	no-1-8-v;
+	disable-wp;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	pinctrl-3 = <&pinctrl_usdhc1_sleep &pinctrl_mmc_cd_sleep>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
+	status = "disabled";
+};
+
+/* eMMC */
+&usdhc3 {
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vqmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
+
+&weim {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_weim_sram  &pinctrl_weim_cs0
+		     &pinctrl_weim_cs1   &pinctrl_weim_cs2
+		     &pinctrl_weim_rdnwr &pinctrl_weim_npwe>;
+	#address-cells = <2>;
+	#size-cells = <1>;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh_oc_1>;
+
+	/* Atmel MXT touchsceen + Capacitive Touch Adapter */
+	/* NOTE: This pin group conflicts with pin groups
+	 * pinctrl_pwm1/pinctrl_pwm4. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_adap: atmeladaptergrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09   0xb0b1  /* SODIMM  28 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0xb0b1  /* SODIMM  30 */
+		>;
+	};
+
+	/* Atmel MXT touchsceen + boards with built-in Capacitive Touch Connector */
+	/* NOTE: This pin group conflicts with pin groups pinctrl_weim_cs1 and
+	 * pinctrl_weim_cs2. Don't use them simultaneously.
+	 */
+	pinctrl_atmel_conn: atmelconnectorgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24  0xb0b1  /* SODIMM_107 */
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0xb0b1  /* SODIMM_106 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__AUD5_TXC	0x130b0
+			MX6QDL_PAD_KEY_ROW0__AUD5_TXD	0x130b0
+			MX6QDL_PAD_KEY_COL1__AUD5_TXFS	0x130b0
+			MX6QDL_PAD_KEY_ROW1__AUD5_RXD	0x130b0
+		>;
+	};
+
+	pinctrl_cam_mclk: cammclkgrp {
+		fsl,pins = <
+			/* Parallel Camera CAM sys_mclk */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2	0x00b0
+		>;
+	};
+
+	/* CSI pins used as GPIOs */
+	pinctrl_csi_gpio_1: csigpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x1b0b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29   0x130b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06   0x1b0b0
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x1b0b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21   0x1b0b0
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20   0x1b0b0
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31   0x1b0b0
+			MX6QDL_PAD_EIM_D17__GPIO3_IO17   0x1b0b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0
+			MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x1b0b0
+			MX6QDL_PAD_SD2_DAT0__GPIO1_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_csi_gpio_2: csigpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04   0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			/* SPI CS */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02	0x000b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO	0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI	0x100b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	((1<<30) | 0x1b0b0)
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_1: gpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20     0x1b0b0
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27      0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23 0x1b0b0
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03     0x1b0b0
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04     0x1b0b0
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06     0x1b0b0
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08     0x1b0b0
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11     0x1b0b0
+		>;
+	};
+	pinctrl_gpio_2: gpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07       0x1b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08       0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_bl_on: gpioblongrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
+		>;
+	};
+
+	pinctrl_hdmi_ddc: hdmiddcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x4001b8b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp { /* Parallel Camera */
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__IPU1_CSI1_DATA12	0xb0b1
+			MX6QDL_PAD_EIM_A18__IPU1_CSI1_DATA13	0xb0b1
+			MX6QDL_PAD_EIM_A19__IPU1_CSI1_DATA14	0xb0b1
+			MX6QDL_PAD_EIM_A20__IPU1_CSI1_DATA15	0xb0b1
+			MX6QDL_PAD_EIM_A21__IPU1_CSI1_DATA16	0xb0b1
+			MX6QDL_PAD_EIM_A22__IPU1_CSI1_DATA17	0xb0b1
+			MX6QDL_PAD_EIM_A23__IPU1_CSI1_DATA18	0xb0b1
+			MX6QDL_PAD_EIM_A24__IPU1_CSI1_DATA19	0xb0b1
+			MX6QDL_PAD_EIM_D17__IPU1_CSI1_PIXCLK	0xb0b1
+			MX6QDL_PAD_EIM_EB3__IPU1_CSI1_HSYNC	0xb0b1
+			MX6QDL_PAD_EIM_D29__IPU1_CSI1_VSYNC	0xb0b1
+			/* Disable PWM pins on camera interface */
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x40
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x40
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1lcdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0xa1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0xa1
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0xa1
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0xa1
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0xa1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0xa1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0xa1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0xa1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0xa1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0xa1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0xa1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0xa1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0xa1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0xa1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0xa1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0xa1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0xa1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0xa1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0xa1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0xa1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0xa1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0xa1
+		>;
+	};
+
+	pinctrl_lvds_transceiver: lvdstxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x03030 /* SODIMM  95 */
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07   0x0b030 /* SODIMM  55 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x03030 /* SODIMM  63 */
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x03030 /* SODIMM  99 */
+		>;
+	};
+
+	pinctrl_mic_gnd: micgndgrp {
+		fsl,pins = <
+			/* Controls Mic GND, PU or '1' pull Mic GND to GND */
+			MX6QDL_PAD_RGMII_TD1__GPIO6_IO21 0x1b0b0
+		>;
+	};
+
+	pinctrl_mmc_cd: mmccdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b1
+		>;
+	};
+
+	pinctrl_mmc_cd_sleep: mmccdslpgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17	0x00040
+			MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16	0x00040
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT	0x1b0b1
+		>;
+	};
+
+	pinctrl_regulator_usbh_pwr: gpioregusbhpwrgrp {
+		fsl,pins = <
+			/* SODIMM 129 / USBH_PEN */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x0f058
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x000b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0
+		>;
+	};
+
+	pinctrl_touch_int: gpiotouchintgrp {
+		fsl,pins = <
+			/* STMPE811 interrupt */
+			MX6QDL_PAD_RGMII_TD0__GPIO6_IO20 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1_dce: uart1dcegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+		>;
+	};
+
+	/* DTE mode */
+	pinctrl_uart1_dte: uart1dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_RTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	/* Additional DTR, DSR, DCD */
+	pinctrl_uart1_ctrl: uart1ctrlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART1_DCD_B 0x1b0b0
+			MX6QDL_PAD_EIM_D24__UART1_DTR_B 0x1b0b0
+			MX6QDL_PAD_EIM_D25__UART1_DSR_B 0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2_dte: uart2dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3_dte: uart3dtegrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbc_det: usbcdetgrp {
+		fsl,pins = <
+			/* SODIMM 137 / USBC_DET */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			/* USBC_DET_OVERWRITE */
+			MX6QDL_PAD_RGMII_RXC__GPIO6_IO30	0x0f058
+			/* USBC_DET_EN */
+			MX6QDL_PAD_RGMII_TX_CTL__GPIO6_IO26	0x0f058
+		>;
+	};
+
+	pinctrl_usbc_id_1: usbcid1grp {
+		fsl,pins = <
+			/* USBC_ID */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usbh_oc_1: usbhoc1grp {
+		fsl,pins = <
+			/* USBH_OC */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x17071
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+
+	/* avoid backfeeding with removed card power */
+	pinctrl_usdhc1_sleep: usdhc1sleepgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD	0x3000
+			MX6QDL_PAD_SD1_CLK__SD1_CLK	0x3000
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0	0x3000
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1	0x3000
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2	0x3000
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3	0x3000
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+			/* eMMC reset */
+			MX6QDL_PAD_SD3_RST__SD3_RESET	0x17059
+		>;
+	};
+
+	pinctrl_weim_cs0: weimcs0grp {
+		fsl,pins = <
+			/* nEXT_CS0 */
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weimcs1grp {
+		fsl,pins = <
+			/* nEXT_CS1 */
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B	0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs2: weimcs2grp {
+		fsl,pins = <
+			/* nEXT_CS2 */
+			MX6QDL_PAD_SD2_DAT1__EIM_CS2_B	0xb0b1
+		>;
+	};
+
+	/* ADDRESS[16:18] [25] used as GPIO */
+	pinctrl_weim_gpio_1: weimgpio1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[19:24] used as GPIO */
+	pinctrl_weim_gpio_2: weimgpio2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	/* DATA[16:31] used as GPIO */
+	pinctrl_weim_gpio_3: weimgpio3grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b0
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b0
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x1b0b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b0
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x1b0b0
+		>;
+	};
+
+	/* DQM[0:3] used as GPIO */
+	pinctrl_weim_gpio_4: weimgpio4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b0
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b0
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_SD2_DAT2__GPIO1_IO13		0x1b0b0
+		>;
+	};
+
+	/* RDY used as GPIO */
+	pinctrl_weim_gpio_5: weimgpio5grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0
+		>;
+	};
+
+	/* ADDRESS[16] DATA[30] used as GPIO */
+	pinctrl_weim_gpio_6: weimgpio6grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_weim_npwe: weimnpwegrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD2__GPIO6_IO22	0x130b0
+			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x0040
+		>;
+	};
+
+	pinctrl_weim_sram: weimsramgrp {
+		fsl,pins = <
+			/* Data */
+			MX6QDL_PAD_CSI0_DAT4__EIM_DATA02	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__EIM_DATA03	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__EIM_DATA04	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__EIM_DATA05	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__EIM_DATA06	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__EIM_DATA07	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__EIM_DATA08	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__EIM_DATA09	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__EIM_DATA10	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__EIM_DATA11	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__EIM_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__EIM_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__EIM_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__EIM_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__EIM_DATA00	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__EIM_DATA01	0x1b0b0
+			/* Address */
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
+			/* Ctrl */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_rdnwr: weimrdnwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23	0x130b0
+			MX6QDL_PAD_SD2_CLK__GPIO1_IO10		0x0040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
index 59e5d15e3ec4..1e530d892b76 100644
--- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
@@ -10,17 +10,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -29,21 +29,25 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
 	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
 		gpios = <&gpio3 9 1>;
@@ -51,12 +55,12 @@
 		pinctrl-0 = <&pinctrl_cubox_i_ir>;
 	};
 
-	pwmleds {
+	led-controller {
 		compatible = "pwm-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_cubox_i_pwm1>;
 
-		front {
+		led-1 {
 			active-low;
 			label = "imx6:red:front";
 			max-brightness = <248>;
@@ -64,38 +68,36 @@
 		};
 	};
 
-	regulators {
-		compatible = "simple-bus";
-
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
 
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
 
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_cubox_i_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
 	};
 
 	sound-spdif {
@@ -139,7 +141,7 @@
 
 	status = "okay";
 
-	rtc: pcf8523@68 {
+	rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
@@ -231,6 +233,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	status = "okay";
 };
 
@@ -243,21 +246,25 @@
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usbh1>;
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&v_usb2>;
 	status = "okay";
 };
 
 &usbotg {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usbotg>;
-	vbus-supply = <&reg_usbotg_vbus>;
+	vbus-supply = <&v_usb1>;
 	status = "okay";
 };
 
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_cubox_i_usdhc2_aux &pinctrl_cubox_i_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	vmmc-supply = <&vcc_3v3>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&vcc_3v3 {
+	vin-supply = <&v_5v0>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 2c253d6d20bd..2c1d6f28e695 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -1,3 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	regulators {
 		compatible = "simple-bus";
@@ -27,16 +30,15 @@
 };
 
 &ecspi3 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 24 0>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "sst,sst25vf040b", "m25p80";
+		compatible = "sst,sst25vf040b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -65,18 +67,18 @@
 
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
@@ -181,7 +183,7 @@
 &usdhc2 { /* module slot */
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio2 2 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
new file mode 100644
index 000000000000..702cd4a1b2e6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-drc02.dtsi
@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. Therefore the micro SD
+ * card must be disabled and the uart1 rts/cts must be output on other DHCOM
+ * pins, see uart1 and usdhc3 node below.
+ */
+&can2 {
+	status = "okay";
+};
+
+&gpio1 {
+	/*
+	 * NOTE: On DRC02, the RS485_RX_En is controlled by a separate
+	 * GPIO line, however the i.MX6 UART driver assumes RX happens
+	 * during TX anyway and that it only controls drive enable DE
+	 * line. Hence, the RX is always enabled here.
+	 */
+	rs485-rx-en-hog {
+		gpio-hog;
+		gpios = <18 0>; /* GPIO Q */
+		line-name = "rs485-rx-en";
+		output-low;
+	};
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DRC02-In1", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DRC02-In2", "DHCOM-H",
+		"DHCOM-I", "DRC02-HW0", "", "", "", "", "", "",
+		"", "", "", "", "DRC02-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DRC02-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DRC02-HW2", "DRC02-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&uart1 {
+	/*
+	 * Due to the use of can2 the signals for can2 Tx and Rx are routed to
+	 * DHCOM UART1 rts/cts pins. Therefore this UART have to use DHCOM GPIOs
+	 * for rts/cts. So configure DHCOM GPIO I as rts and GPIO M as cts.
+	 */
+	/delete-property/ uart-has-rtscts;
+	cts-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>; /* GPIO M */
+	pinctrl-0 = <&pinctrl_uart1 &pinctrl_dhcom_i &pinctrl_dhcom_m>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+};
+
+&uart5 {
+	/*
+	 * On DRC02 this UART is used as RS485 interface and RS485_TX_En is
+	 * controlled by DHCOM GPIO P. So remove rts/cts pins and the property
+	 * uart-has-rtscts from this UART and add the DHCOM GPIO P pin via
+	 * rts-gpios. The RS485_RX_En is controlled by DHCOM GPIO Q, see gpio1
+	 * node above.
+	 */
+	/delete-property/ uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	pinctrl-0 = <&pinctrl_uart5_core &pinctrl_dhcom_p &pinctrl_dhcom_q>;
+	pinctrl-names = "default";
+	rts-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>; /* GPIO P */
+};
+
+&usbh1 {
+	disable-over-current;
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&usdhc3 {
+	/*
+	 * Due to the use of can2 the micro SD card on module have to be
+	 * disabled, because the pins SD3_DAT0 and SD3_DAT1 are muxed as
+	 * can2 Tx and Rx.
+	 */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: uart1 rts
+			 * M: uart1 cts
+			 * P: uart5 rs485-tx-en
+			 * Q: uart5 rs485-rx-en
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_uart5_core: uart5-core-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
new file mode 100644
index 000000000000..6248b126b557
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-pdk2.dtsi
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		compatible = "fixed-clock";
+	};
+
+	display_bl: display-bl {
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		compatible = "pwm-backlight";
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>; /* GPIO G */
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "rgb24";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif &pinctrl_dhcom_g>;
+		pinctrl-names = "default";
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	gpio-keys {
+		#size-cells = <0>;
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; /* GPIO A */
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			pinctrl-0 = <&pinctrl_dhcom_a>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-1 {
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; /* GPIO B */
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			pinctrl-0 = <&pinctrl_dhcom_b>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-2 {
+			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; /* GPIO C */
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			pinctrl-0 = <&pinctrl_dhcom_c>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+
+		button-3 {
+			gpios = <&gpio6 3 GPIO_ACTIVE_LOW>; /* GPIO D */
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			pinctrl-0 = <&pinctrl_dhcom_d>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		/*
+		 * Disable led-5, because GPIO E is
+		 * already used as touch interrupt.
+		 */
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* GPIO E */
+			pinctrl-0 = <&pinctrl_dhcom_e>;
+			pinctrl-names = "default";
+			status = "disabled";
+		};
+
+		led-6 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>; /* GPIO F */
+			pinctrl-0 = <&pinctrl_dhcom_f>;
+			pinctrl-names = "default";
+		};
+
+		led-7 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* GPIO H */
+			pinctrl-0 = <&pinctrl_dhcom_h>;
+			pinctrl-names = "default";
+		};
+
+		led-8 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+
+	panel {
+		backlight = <&display_bl>;
+		compatible = "edt,etm0700g0edh6";
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx-sgtl5000";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	pinctrl-0 = <&pinctrl_audmux_ext>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "disabled";
+};
+
+/* 1G ethernet */
+/delete-node/ &ethphy0;
+&fec {
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy7>;
+	pinctrl-0 = <&pinctrl_enet_1G>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy7: ethernet-phy@7 { /* KSZ 9021 */
+			compatible = "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio1>;
+			interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy7>;
+			pinctrl-names = "default";
+			reg = <7>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <1000>;
+			reset-gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			rxdv-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+			txen-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&sw2_reg>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		pinctrl-0 = <&pinctrl_dhcom_e>;
+		pinctrl-names = "default";
+		reg = <0x38>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie &pinctrl_dhcom_j>;
+	reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; /* GPIO J */
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+};
+
+&usdhc2 { /* SD card */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * A: key TA1
+			 * B: key TA2
+			 * C: key TA3
+			 * D: key TA4
+			 * E: touchscreen
+			 * F: led6
+			 * G: backlight enable
+			 * H: led7
+			 * I: led8
+			 * J: PCIe reset
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_audmux_ext: audmux-ext-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+		>;
+	};
+
+	pinctrl_enet_1G: enet-1G-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+		>;
+	};
+
+	pinctrl_ethphy7: ethphy7-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26		0xb1 /* WOL */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0xb0 /* Reset */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0xb1 /* Int */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
new file mode 100644
index 000000000000..4cd4cb9543c8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-picoitx.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 DH electronics GmbH
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_YELLOW>;
+			default-state = "off";
+			function = LED_FUNCTION_INDICATOR;
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* GPIO I */
+			pinctrl-0 = <&pinctrl_dhcom_i>;
+			pinctrl-names = "default";
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "PicoITX-In2", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "PicoITX-In1", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "PicoITX-HW2", "", "", "", "", "", "",
+		"", "", "", "", "PicoITX-Out1", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "PicoITX-Out2", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "PicoITX-HW0", "PicoITX-HW1",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			/*
+			 * The following DHCOM GPIOs are used on this board.
+			 * Therefore, they have been removed from the list below.
+			 * I: yellow led
+			 */
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
new file mode 100644
index 000000000000..eaa87b333164
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-dhcom-som.dtsi
@@ -0,0 +1,850 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015-2021 DH electronics GmbH
+ * Copyright (C) 2018 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c2;
+		i2c1 = &i2c1;
+		i2c2 = &i2c3;
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc3;
+		mmc2 = &usdhc4;
+		mmc3 = &usdhc1;
+		rtc0 = &rtc_i2c;
+		rtc1 = &snvs_rtc;
+		serial0 = &uart1;
+		serial1 = &uart5;
+		serial2 = &uart4;
+		serial3 = &uart2;
+		serial4 = &uart3;
+	};
+
+	memory@10000000 { /* Appropriate memory size will be filled by U-Boot */
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	reg_3p3v: regulator-3P3V {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "3P3V";
+	};
+
+	reg_eth_vio: regulator-eth-vio {
+		compatible = "regulator-fixed";
+		gpio = <&gpio1 7 0>;
+		pinctrl-0 = <&pinctrl_enet_vio>;
+		pinctrl-names = "default";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-name = "eth_vio";
+		vin-supply = <&sw2_reg>;
+	};
+
+	/* OE pin of the latch is low active */
+	reg_latch_oe_on: regulator-latch-oe-on {
+		compatible = "regulator-fixed";
+		gpio = <&gpio3 22 0>;
+		regulator-always-on;
+		regulator-name = "latch_oe_on";
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 31 0>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb_h1_vbus";
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-name = "usb_otg_vbus";
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/*
+ * Special SoM hardware required which uses the pins from micro SD card. The
+ * pins SD3_DAT0 and SD3_DAT1 are muxed as can2 Tx and Rx. The signals for can2
+ * Tx and Rx are routed to the DHCOM UART1 rts/cts pins. So to enable can2 on
+ * the board device tree file, the micro SD card must be disabled and the uart1
+ * rts/cts must be disabled or output on other DHCOM pins.
+ */
+&can2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 { /* S25FL116K */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		reg = <0>;
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&fec {
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	pinctrl-0 = <&pinctrl_enet_100M>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */
+			compatible = "ethernet-phy-id0007.c0f0",
+				     "ethernet-phy-ieee802.3-c22";
+			interrupt-parent = <&gpio4>;
+			interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+			pinctrl-0 = <&pinctrl_ethphy0>;
+			pinctrl-names = "default";
+			reg = <0>;
+			reset-assert-us = <500>;
+			reset-deassert-us = <500>;
+			reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+			smsc,disable-energy-detect; /* Make plugin detection reliable */
+		};
+	};
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "DHCOM-A", "", "DHCOM-B", "DHCOM-C", "", "",
+		"", "", "", "", "", "", "", "",
+		"DHCOM-R", "DHCOM-S", "DHCOM-Q", "DHCOM-T", "DHCOM-U", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"SOM-HW2", "", "", "SOM-HW0", "", "SOM-MEM1", "SOM-MEM0", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "DHCOM-G", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "DHCOM-E", "DHCOM-INT", "DHCOM-H",
+		"DHCOM-I", "DHCOM-L", "", "", "", "", "", "",
+		"", "", "", "", "DHCOM-F", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "DHCOM-V", "DHCOM-W", "", "DHCOM-O", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio6 {
+	gpio-line-names =
+		"", "", "", "DHCOM-D", "", "", "SOM-HW1", "",
+		"", "", "", "", "", "", "DHCOM-J", "DHCOM-K",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio7 {
+	gpio-line-names =
+		"DHCOM-M", "DHCOM-N", "", "", "", "", "", "",
+		"", "", "", "", "", "DHCOM-P", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&i2c1 {
+	/*
+	 * Info: According to erratum ERR007805 clock frequency limit is 375000.
+	 * The erratum for i.MX6S/DL is here [1] and for i.MX6Q/D is here [2].
+	 * [1] https://www.nxp.com/docs/en/errata/IMX6SDLCE.pdf
+	 * [2] https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf
+	 */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c2 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	/* Info: Clock frequency limit is 375000 (for details see i2c1) */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	pinctrl-names = "default", "gpio";
+	scl-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		interrupt-parent = <&gpio5>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		reg = <0x3c>;
+
+		regulators {
+			sw1_reg: sw1 {
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <1040000>;
+			};
+
+			sw2_reg: sw2 {
+				lltc,fb-voltage-divider = <100000 28000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3657142>;
+				regulator-min-microvolt = <1885714>;
+				regulator-ramp-delay = <7000>;
+			};
+
+			sw3_reg: sw3 {
+				lltc,fb-voltage-divider = <100000 110000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1527272>;
+				regulator-min-microvolt = <787500>;
+				regulator-ramp-delay = <7000>;
+				regulator-suspend-mem-microvolt = <980000>;
+			};
+
+			sw4_reg: sw4 {
+				lltc,fb-voltage-divider = <100000 93100>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1659291>;
+				regulator-min-microvolt = <855571>;
+				regulator-ramp-delay = <7000>;
+			};
+
+			ldo1_reg: ldo1 {
+				lltc,fb-voltage-divider = <102000 29400>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3240306>;
+				regulator-min-microvolt = <3240306>;
+			};
+
+			ldo2_reg: ldo2 {
+				lltc,fb-voltage-divider = <100000 41200>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2484708>;
+				regulator-min-microvolt = <2484708>;
+			};
+		};
+	};
+
+	touchscreen@49 { /* TSC2004 */
+		compatible = "ti,tsc2004";
+		interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_tsc2004>;
+		pinctrl-names = "default";
+		reg = <0x49>;
+		vio-supply = <&reg_3p3v>;
+		status = "disabled";
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		pagesize = <16>;
+		reg = <0x50>;
+	};
+
+	rtc_i2c: rtc@56 {
+		compatible = "microcrystal,rv3029";
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		pinctrl-0 = <&pinctrl_rtc>;
+		pinctrl-names = "default";
+		reg = <0x56>;
+	};
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+};
+
+&reg_arm {
+	vin-supply = <&sw3_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&sw1_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&sw2_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&sw2_reg>;
+};
+
+&uart1 { /* DHCOM UART1 */
+	dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+	dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
+	dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 { /* DHCOM UART3 */
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart5 { /* DHCOM UART2 */
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	dr_mode = "host";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	dr_mode = "otg";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	pinctrl-names = "default";
+	vbus-supply = <&reg_usb_otg_vbus>;
+	status = "okay";
+};
+
+&usdhc2 { /* External SD card via DHCOM */
+	cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+&usdhc3 { /* Micro SD card on module */
+	cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>;
+	fsl,wp-controller;
+	keep-power-in-suspend;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usdhc4 { /* eMMC on module */
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&weim {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	fsl,weim-cs-gpr = <&gpr>;
+	pinctrl-0 = <&pinctrl_weim &pinctrl_weim_cs0 &pinctrl_weim_cs1>;
+	pinctrl-names = "default";
+	/* It is necessary to setup 2x 64MB otherwise setting gpr fails */
+	ranges = <0 0 0x08000000 0x04000000>, /* CS0 */
+		 <1 0 0x0c000000 0x04000000>; /* CS1 */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <
+			&pinctrl_hog_base
+			&pinctrl_dhcom_a &pinctrl_dhcom_b &pinctrl_dhcom_c
+			&pinctrl_dhcom_d &pinctrl_dhcom_e &pinctrl_dhcom_f
+			&pinctrl_dhcom_g &pinctrl_dhcom_h &pinctrl_dhcom_i
+			&pinctrl_dhcom_j &pinctrl_dhcom_k &pinctrl_dhcom_l
+			&pinctrl_dhcom_m &pinctrl_dhcom_n &pinctrl_dhcom_o
+			&pinctrl_dhcom_p &pinctrl_dhcom_q &pinctrl_dhcom_r
+			&pinctrl_dhcom_s &pinctrl_dhcom_t &pinctrl_dhcom_u
+			&pinctrl_dhcom_v &pinctrl_dhcom_w &pinctrl_dhcom_int
+		>;
+	pinctrl-names = "default";
+
+	pinctrl_hog_base: hog-base-grp {
+		fsl,pins = <
+			/* GPIOs for memory coding */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x120b0
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x120b0
+			/* GPIOs for hardware coding */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x120b0
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x120b0
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x120b0
+		>;
+	};
+
+	/* DHCOM GPIOs */
+	pinctrl_dhcom_a: dhcom-a-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_2__GPIO1_IO02	0x400120b0>;
+	};
+
+	pinctrl_dhcom_b: dhcom-b-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_4__GPIO1_IO04	0x400120b0>;
+	};
+
+	pinctrl_dhcom_c: dhcom-c-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_d: dhcom-d-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0>;
+	};
+
+	pinctrl_dhcom_e: dhcom-e-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x400120b0>;
+	};
+
+	pinctrl_dhcom_f: dhcom-f-grp {
+		fsl,pins = <MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_g: dhcom-g-grp {
+		fsl,pins = <MX6QDL_PAD_EIM_D27__GPIO3_IO27	0x400120b0>;
+	};
+
+	pinctrl_dhcom_h: dhcom-h-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW0__GPIO4_IO07	0x400120b0>;
+	};
+
+	pinctrl_dhcom_i: dhcom-i-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL1__GPIO4_IO08	0x400120b0>;
+	};
+
+	pinctrl_dhcom_j: dhcom-j-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0>;
+	};
+
+	pinctrl_dhcom_k: dhcom-k-grp {
+		fsl,pins = <MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x400120b0>;
+	};
+
+	pinctrl_dhcom_l: dhcom-l-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_ROW1__GPIO4_IO09	0x400120b0>;
+	};
+
+	pinctrl_dhcom_m: dhcom-m-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x400120b0>;
+	};
+
+	pinctrl_dhcom_n: dhcom-n-grp {
+		fsl,pins = <MX6QDL_PAD_SD3_DAT4__GPIO7_IO01	0x400120b0>;
+	};
+
+	pinctrl_dhcom_o: dhcom-o-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x400120b0>;
+	};
+
+	pinctrl_dhcom_p: dhcom-p-grp {
+		fsl,pins = <MX6QDL_PAD_GPIO_18__GPIO7_IO13	0x400120b0>;
+	};
+
+	pinctrl_dhcom_q: dhcom-q-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CMD__GPIO1_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_r: dhcom-r-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x400120b0>;
+	};
+
+	pinctrl_dhcom_s: dhcom-s-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT1__GPIO1_IO17	0x400120b0>;
+	};
+
+	pinctrl_dhcom_t: dhcom-t-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_DAT2__GPIO1_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_u: dhcom-u-grp {
+		fsl,pins = <MX6QDL_PAD_SD1_CLK__GPIO1_IO20	0x400120b0>;
+	};
+
+	pinctrl_dhcom_v: dhcom-v-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x400120b0>;
+	};
+
+	pinctrl_dhcom_w: dhcom-w-grp {
+		fsl,pins = <MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x400120b0>;
+	};
+
+	pinctrl_dhcom_int: dhcom-int-grp {
+		fsl,pins = <MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x400120b0>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet_100M: enet-100M-grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
+
+	pinctrl_enet_vio: enet-vio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x120b0
+		>;
+	};
+
+	pinctrl_ethphy0: ethphy0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0xb0 /* Reset */
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0xb1 /* Int */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+		>;
+	};
+
+	pinctrl_pcie: pcie-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* Wake */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc: rtc-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x120b0
+		>;
+	};
+
+	pinctrl_tsc2004: tsc2004-grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x120b0
+		>;
+	};
+
+	pinctrl_uart1: uart1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B		0x4001b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x4001b0b1
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24		0x4001b0b1
+			MX6QDL_PAD_EIM_D25__GPIO3_IO25		0x4001b0b1
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x4001b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5-grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B	0x4001b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x120b0
+			MX6QDL_PAD_EIM_D30__USB_H1_OC		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotg-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x120b0
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x120b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_weim: weim-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0a6
+			MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0a6
+			MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0a6
+			MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0a6
+			MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0a6
+			MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0a6
+			MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0a6
+			MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0a6
+			MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0a6
+			MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0a6
+			MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0a6
+			MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0a6
+			MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0a6
+			MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0a6
+			MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0a6
+			MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0a6
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x130b0
+			MX6QDL_PAD_EIM_LBA__EIM_LBA_B		0xb060 /* LE */
+			MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0a6
+			MX6QDL_PAD_EIM_RW__EIM_RW		0xb0a6 /* WE */
+		>;
+	};
+
+	pinctrl_weim_cs0: weim-cs0-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
+		>;
+	};
+
+	pinctrl_weim_cs1: weim-cs1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS1__EIM_CS1_B		0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ds.dtsi b/arch/arm/boot/dts/imx6qdl-ds.dtsi
new file mode 100644
index 000000000000..f7e517555697
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ds.dtsi
@@ -0,0 +1,458 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2021 Dillon Min <dillon.minfei@gmail.com>
+//
+// Based on imx6qdl-sabresd.dtsi which is:
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led-0 {
+			gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov2659_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_gpio>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "st,m25p80", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	pfuze100: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ov2659: camera@30 {
+		compatible = "ovti,ov2659";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov2659>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xvclk";
+		reg = <0x30>;
+		powerdown-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+		status = "okay";
+
+		port {
+			ov2659_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				link-frequencies = /bits/ 64 <70000000>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+		>;
+	};
+
+	pinctrl_ecspi1_gpio: ecspi1grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09		0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10         0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi_cec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+		>;
+	};
+
+	pinctrl_ov2659: ov2659grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b0
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1_gpio: usdhc1grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0
+		>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+	status = "disabled";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
new file mode 100644
index 000000000000..c4e146f3341b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-emcon-avari.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+/ {
+	aliases {
+		boardid = &boardid;
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		mmc3 = &usdhc4;
+	};
+
+	reg_wall_5p0: reg-wall5p0 {
+		compatible = "regulator-fixed";
+		regulator-name = "Main-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base3p3: reg-base3p3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "3V3-avari";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_base1p5: reg-base1p5 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_base3p3>;
+		regulator-name = "1V5-avari";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_usb_otg: reg-otgvbus {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_wall_5p0>;
+		regulator-name = "OTG_VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	clk_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency  = <12000000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "emCON-avari-sgtl5000";
+		ssi-controller = <&ssi2>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <2>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&ecspi2 {
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_codec>;
+		VDDA-supply = <&reg_base3p3>;
+		VDDIO-supply = <&reg_base3p3>;
+	};
+
+	captouch: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		wakeup-source;
+	};
+
+	boardid: gpio@3a {
+		compatible = "nxp,pca8574";
+		reg = <0x3a>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&rgb_encoder {
+	status = "okay";
+};
+
+&rgb_panel {
+	compatible = "edt,etm0700g0bdh6";
+	status = "okay";
+};
+
+&ssi2 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+	uart-has-rtscts;
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	status = "okay";
+};
+
+&usdhc1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
new file mode 100644
index 000000000000..ee2dd75cead6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -0,0 +1,834 @@
+// SPDX-License-Identifier: (GPL-2.0 or MIT)
+//
+// Copyright (C) 2018 emtrion GmbH
+//
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+
+	model = "emtrion SoM emCON-MX6";
+	compatible = "emtrion,emcon-mx6";
+
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc1;
+		rtc0 = &ds1307;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_emcon_wake>;
+
+		wake {
+			label = "Wake";
+			linux,code = <KEY_WAKEUP>;
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	som_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_som_leds>;
+
+		led-green {
+			label = "som:green";
+			gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+
+		led-red {
+			label = "som:red";
+			gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
+			default-state = "keep";
+		};
+
+	};
+
+	lvds_backlight: lvds-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lvds_bl>;
+		enable-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm1 0 50000>;
+		brightness-levels = <
+			0 4 8 16 32 64 80 96 112
+			128 144 160 176 250
+		>;
+		default-brightness-level = <13>;
+		status = "okay";
+	};
+
+	pwm_fan: pwm-fan {
+		compatible = "pwm-fan";
+		#cooling-cells = <2>;
+		pwms = <&pwm4 0 50000>;
+		cooling-levels = <0 64 127 191 255>;
+		status = "disabled";
+	};
+
+
+	rgb_encoder: display {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb24_display>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			rgb_encoder_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			rgb_encoder_out: endpoint {
+				remote-endpoint = <&rgb_panel_in>;
+			};
+		};
+	};
+
+	rgb_panel: lcd {
+		backlight = <&rgb_backlight>;
+		power-supply = <&reg_parallel_disp>;
+
+		port {
+			rgb_panel_in: endpoint {
+				remote-endpoint = <&rgb_encoder_out>;
+			};
+		};
+	};
+
+	reg_parallel_disp: reg-parallel-display {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb_bl_en>;
+		regulator-name = "LCD-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_lvds_disp: reg-lvds-display {
+		compatible = "regulator-fixed";
+		regulator-name = "LVDS-Supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	rgb_backlight: rgb-backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rgb_bl>;
+		enable-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+		pwms = <&pwm3 0 5000000>;
+		brightness-levels = <
+			250 176 160 144 128 112
+			96 80 64 48 32 16 8 1
+		>;
+		default-brightness-level = <13>;
+		status = "okay";
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		<&gpio2 27 GPIO_ACTIVE_LOW>;
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nor_flash>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <50>;
+	phy-supply = <&vdd_1V8_reg>;
+	phy-handle = <&ksz9031>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ksz9031: phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+			rxdv-skew-ps = <480>;
+			txen-skew-ps = <480>;
+			rxd0-skew-ps = <480>;
+			rxd1-skew-ps = <480>;
+			rxd2-skew-ps = <480>;
+			rxd3-skew-ps = <480>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <360>;
+			txd3-skew-ps = <360>;
+			txc-skew-ps = <1020>;
+			rxc-skew-ps = <960>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	da9063: pmic@58 {
+		compatible = "dlg,da9063";
+		reg = <0x58>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			wakeup-source;
+		};
+
+		watchdog {
+			compatible = "dlg,da9063-watchdog";
+			timeout-sec = <0>;
+		};
+
+		regulators {
+			vddcore_reg: bcore1 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <2>;
+				regulator-name = "DA9063_CORE";
+				regulator-always-on;
+			};
+
+			vddsoc_reg: bcore2 {
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1450000>;
+				regulator-ramp-delay = <2>;
+				regulator-name = "DA9063_SOC";
+				regulator-always-on;
+			};
+
+			vdd_ddr3_reg: bpro {
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-ramp-delay = <2>;
+				regulator-always-on;
+			};
+
+			vdd_3v3_reg: bperi {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-ramp-delay = <2>;
+				regulator-always-on;
+			};
+
+			vdd_sata_reg: ldo3 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+			vdd_mipi_reg: ldo4 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_mx6_snvs_reg: ldo5 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_hdmi_reg: ldo6 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			vdd_pcie_reg: ldo7 {
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+			};
+
+			vdd_1V8_reg: ldo8 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vdd_3V3_sdc_reg: ldo9 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			vdd_1V2_reg: ldo10 {
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+		};
+	};
+
+	ds1307: rtc@68 {
+		compatible = "dallas,ds1307";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+&iomuxc {
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD			0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC			0x1b060
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD			0x130B0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS			0x1b060
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX		0x1b0b1
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b0b1
+		>;
+	};
+
+	pinctrl_cpi1: csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0xb0b1
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC	0x1b0b1
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b1
+		>;
+	};
+
+	/*camera2-pinctrl is in imx6q-emcon.dtsi or imx6dl-emcon.dtsi*/
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27			0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x100b1
+		>;
+	};
+
+	pinctrl_emcon_gpio1: emcongpio1 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio2: emcongpio2 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio3: emcongpio3 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio4: emcongpio4 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio5: emcongpio5 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio6: emcongpio6 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio7: emcongpio7 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_gpio8: emcongpio8 {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_a: emconirqa {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_b: emconirqb {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_c: emconirqc {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16		0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_irq_pwr: emconirqpwr {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23			0x0b0b1
+		>;
+	};
+
+	pinctrl_emcon_wake: emconwake {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO			0x1b030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC			0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC			0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0			0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1			0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2			0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3			0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001a0b1
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC			0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0			0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1			0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2			0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3			0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20		0x1b058
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30		0x1b0b0
+		 >;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4000b070
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b870
+		>;
+	};
+
+	pinctrl_irq_touch1: irqtouch1 {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x0b0b1
+		>;
+	};
+
+	pinctrl_irq_touch2: irqtouch2 {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31			0x0b0b1
+		>;
+	};
+
+	pinctrl_lvds_bl: lvdsbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT			0x0b0b1
+			MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09		0x0b0b1
+		>;
+	};
+
+	pinctrl_lvds_reg: lvdsreggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__GPIO7_IO10			0x0b0b1
+		>;
+	};
+
+
+	pinctrl_nor_flash: norflashgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11		0x1b0b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x100b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02			0x100b1
+		>;
+	};
+
+	pinctrl_pcie_ctrl: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22			0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12			0x1b0b1
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08			0x0b0b1
+		>;
+	};
+
+	pinctrl_pwm_fan: pwmfan {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT			0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb_bl: rgbbacklightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT			0x0b0b1
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08		0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb_bl_en: rgbenable {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__GPIO7_IO09			0x0b0b1
+		>;
+	};
+
+	pinctrl_rgb24_display: rgbgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_secure: securegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x1b0b1
+		>;
+	};
+
+	pinctrl_som_leds: somledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00			0x0b0b1
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01			0x0b0b1
+		>;
+	};
+
+	pinctrl_spdif_in: spdifin {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN			0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif_out: spdifout {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT			0x13091
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA		0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usb_host1: usbhgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__USB_H1_PWR			0x1B058
+			MX6QDL_PAD_EIM_D30__USB_H1_OC			0x1B058
+		>;
+	};
+
+	pinctrl_usb_otg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID		0x17059
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07			0x17059
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08			0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD			0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK			0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0			0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1			0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2			0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3			0x17059
+			MX6QDL_PAD_GPIO_1__SD1_CD_B			0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__SD1_WP			0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD			0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK			0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0			0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1			0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2			0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3			0x17059
+			MX6QDL_PAD_GPIO_4__SD2_CD_B			0x1b0b1
+			MX6QDL_PAD_GPIO_2__SD2_WP			0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17059
+			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&rgb_encoder_in>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_ctrl>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	disable-gpio = <&gpio2 22 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+};
+
+&usbh1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_host1>;
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg>;
+	vbus-supply = <&reg_usb_otg>;
+	dr_mode = "peripheral";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	fsl,wp-controller;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	fsl,wp-controller;
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+/******device power Management*********/
+
+&cpu0 {
+	voltage-tolerance = <2>;
+};
+
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+/*******Disabled HW following***********/
+
+&snvs_rtc {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index f2867c4b34a8..e75e1a5364b8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -1,15 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -25,26 +21,72 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x20000000>;
 	};
 
@@ -56,45 +98,36 @@
 		status = "okay";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_3p3v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_5p0v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 };
 
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -116,6 +149,103 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -140,13 +270,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -158,6 +281,81 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -165,6 +363,37 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
 };
 
 &pcie {
@@ -174,6 +403,24 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
@@ -210,124 +457,182 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
-	imx6qdl-gw51xx {
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
-			>;
-		};
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
 
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
 
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
-			>;
-		};
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index b5756c21ea1d..47d9a8d08197 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -1,15 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -34,32 +30,78 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x20000000>;
 	};
 
@@ -71,57 +113,47 @@
 		status = "okay";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
 
-		/* remove this fixed regulator once ltc3676__sw2 driver available */
-		reg_1p8v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		reg_5p0v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_usb_otg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
@@ -148,13 +180,28 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
 };
 
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -176,6 +223,109 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -200,13 +350,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -218,6 +361,89 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -226,21 +452,26 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	touchscreen: egalax_ts@04 {
+	touchscreen: egalax_ts@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <12 2>;
 		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
@@ -275,7 +506,20 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -288,6 +532,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -316,161 +561,235 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
-	imx6qdl-gw52xx {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	0x130b0 /* AUD4_MCK */
+		>;
+	};
 
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
-			>;
-		};
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
 
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0 /* PHY Reset */
+		>;
+	};
 
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
-			>;
-		};
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE_RST# */
+		>;
+	};
 
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
-			>;
-		};
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00	0x1b0b0 /* CD */
-			>;
-		};
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 86f03c1b147c..fb1d29abe099 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -1,20 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet1 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -35,32 +30,78 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
@@ -72,57 +113,47 @@
 		status = "okay";
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
 
-		/* remove when pmic 1p8 regulator available */
-		reg_1p8v: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "1P8V";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_can1>;
+		regulator-name = "can1_stby";
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
 
-		reg_usb_h1_vbus: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
 
-		reg_usb_otg_vbus: regulator@4 {
-			compatible = "regulator-fixed";
-			reg = <4>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-			enable-active-high;
-		};
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	sound {
@@ -149,13 +180,21 @@
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -177,6 +216,115 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -201,13 +349,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -219,6 +360,87 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -227,27 +449,32 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_1p8v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	touchscreen: egalax_ts@04 {
+	touchscreen: egalax_ts@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <11 2>;
 		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
 	status = "okay";
 
-	lvds-channel@1 {
+	lvds-channel@0 {
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <18>;
 		status = "okay";
@@ -274,13 +501,22 @@
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
+};
 
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -293,6 +529,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -322,162 +559,226 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
-	imx6qdl-gw53xx {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+		>;
+	};
 
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
 
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
 
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
+		>;
+	};
 
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
 
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-				MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
-			>;
-		};
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0 /* CD */
-			>;
-		};
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index 4a8d97f47759..4e20cb97058e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -1,20 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
 	aliases {
-		ethernet1 = &eth1;
 		led0 = &led0;
 		led1 = &led1;
 		led2 = &led2;
@@ -35,32 +31,78 @@
 		default-brightness-level = <7>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
@@ -95,6 +137,16 @@
 			regulator-always-on;
 		};
 
+		reg_can1_stby: regulator-can1-stby {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_can1>;
+			regulator-name = "can1_stby";
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
 		reg_usb_h1_vbus: regulator@2 {
 			compatible = "regulator-fixed";
 			reg = <2>;
@@ -115,12 +167,12 @@
 		};
 	};
 
-	sound {
+	sound-analog {
 		compatible = "fsl,imx6q-ventana-sgtl5000",
 			     "fsl,imx-audio-sgtl5000";
 		model = "sgtl5000-audio";
 		ssi-controller = <&ssi1>;
-		audio-codec = <&codec>;
+		audio-codec = <&sgtl5000>;
 		audio-routing =
 			"MIC_IN", "Mic Jack",
 			"Mic Jack", "Mic Bias",
@@ -134,18 +186,52 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>; /* AUD4<->sgtl5000 */
 	status = "okay";
+
+	ssi2 {
+		fsl,audmux-port = <1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(1)>;
+	};
 };
 
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
 	status = "okay";
 };
 
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
@@ -167,6 +253,117 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+		};
+
+		fan-controller@2c {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2c>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -191,13 +388,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -210,7 +400,7 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@08 {
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -260,6 +450,8 @@
 			swbst_reg: swbst {
 				regulator-min-microvolt = <5000000>;
 				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+				regulator-always-on;
 			};
 
 			snvs_reg: vsnvs {
@@ -316,27 +508,32 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	sgtl5000: audio-codec@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&sw4_reg>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
-	touchscreen: egalax_ts@04 {
+	touchscreen: egalax_ts@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <12 2>;
 		wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
 	};
+
+	accel@1e {
+		compatible = "nxp,fxos8700";
+		reg = <0x1e>;
+	};
 };
 
 &ldb {
 	status = "okay";
 
-	lvds-channel@1 {
+	lvds-channel@0 {
 		fsl,data-mapping = "spwg";
 		fsl,data-width = <18>;
 		status = "okay";
@@ -363,15 +560,31 @@
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
 	status = "okay";
+};
 
-	eth1: sky2@8 { /* MAC/PHY on bus 8 */
-		compatible = "marvell,sky2";
-	};
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
 };
 
-&pwm4 {
+&pwm2 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default", "state_dio";
+	pinctrl-0 = <&pinctrl_pwm4_backlight>;
+	pinctrl-1 = <&pinctrl_pwm4_dio>;
 	status = "okay";
 };
 
@@ -386,6 +599,7 @@
 &uart1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -415,160 +629,251 @@
 };
 
 &usdhc3 {
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
 	status = "okay";
 };
 
 &iomuxc {
-	imx6qdl-gw54xx {
-		pinctrl_audmux: audmuxgrp {
-			fsl,pins = <
-				MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
-				MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
-				MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
-				MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
-				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_DAT0__AUD4_RXD		0x130b0
+			MX6QDL_PAD_SD2_DAT3__AUD4_TXC		0x130b0
+			MX6QDL_PAD_SD2_DAT2__AUD4_TXD		0x110b0
+			MX6QDL_PAD_SD2_DAT1__AUD4_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			MX6QDL_PAD_EIM_D25__AUD5_RXC            0x130b0
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD        0x130b0
+			MX6QDL_PAD_EIM_D24__AUD5_RXFS           0x130b0
+		>;
+	};
 
-		pinctrl_enet: enetgrp {
-			fsl,pins = <
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
-			>;
-		};
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+		>;
+	};
 
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
 
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			>;
-		};
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pps: ppsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0 /* PCIE IRQ */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0 /* PCIE RST */
+		>;
+	};
 
-		pinctrl_pwm4: pwm4grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
-			>;
-		};
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
 
-		pinctrl_uart1: uart1grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
-			>;
-		};
+	pinctrl_pwm4_backlight: pwm4grpbacklight {
+		fsl,pins = <
+			/* LVDS_PWM J6.5 */
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
 
-		pinctrl_usdhc3: usdhc3grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
-				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
-				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
-				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
-				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
-				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
-			>;
-		};
+	pinctrl_pwm4_dio: pwm4grpdio {
+		fsl,pins = <
+			/* DIO3 J16.4 */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_can1: regcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index d1866a0a2f13..0fa4b8eeddee 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -46,6 +46,10 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/tda1997x.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -61,12 +65,57 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
 			default-state = "on";
@@ -74,41 +123,74 @@
 		};
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x20000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 
-		reg_5p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
 
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+	sound-digital {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "tda1997x-audio";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
 		};
 
-		reg_usb_otg_vbus: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&hdmi_receiver>;
 		};
 	};
 };
 
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	aud5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
+	};
+};
+
 &can1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_flexcan1>;
@@ -132,6 +214,97 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -156,13 +329,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -174,6 +340,89 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: HDMI In analog */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -189,6 +438,60 @@
 		#gpio-cells = <2>;
 	};
 
+	hdmi_receiver: hdmi-receiver@48 {
+		compatible = "nxp,tda19971";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tda1997x>;
+		reg = <0x48>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		DOVDD-supply = <&reg_3p3>;
+		AVDD-supply = <&reg_1p8b>;
+		DVDD-supply = <&reg_1p8a>;
+		#sound-dai-cells = <0>;
+		nxp,audout-format = "i2s";
+		nxp,audout-layout = <0>;
+		nxp,audout-width = <16>;
+		nxp,audout-mclk-fs = <128>;
+		/*
+		 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
+		 * and Y[11:4] across 16bits in the same cycle
+		 * which we map to VP[15:08]<->CSI_DATA[19:12]
+		 */
+		nxp,vidout-portcfg =
+			/*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
+			< TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
+			/*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
+			< TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
+			/*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
+			< TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
+			/*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
+			< TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
+
+		port {
+			tda1997x_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <16>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+				data-active = <1>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <16>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
+	bus-width = <16>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
 };
 
 &pcie {
@@ -198,6 +501,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &ssi1 {
 	status = "okay";
 };
@@ -227,88 +542,154 @@
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
-	imx6qdl-gw51xx {
-		pinctrl_flexcan1: flexcan1grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
-				MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
-			>;
-		};
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT19__AUD5_RXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT14__AUD5_RXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS	0x130b0
+		>;
+	};
 
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
-			>;
-		};
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_ipu1_csi0: ipu1_csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19		0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC		0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK	0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC		0x1b0b0
+		>;
+	};
 
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0 /* PCIE RST */
+		>;
+	};
 
-		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
-			>;
-		};
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_tda1997x: tda1997xgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 5c6587f6c420..77ae611b817a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -1,15 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2014 Gateworks Corporation
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
 	/* these are used by bootloader for disabling nodes */
@@ -26,66 +22,103 @@
 		bootargs = "console=ttymxc1,115200";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		led0: user1 {
+		led0: led-user1 {
 			label = "user1";
 			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
 			default-state = "on";
 			linux,default-trigger = "heartbeat";
 		};
 
-		led1: user2 {
+		led1: led-user2 {
 			label = "user2";
 			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
 			default-state = "off";
 		};
 
-		led2: user3 {
+		led2: led-user3 {
 			label = "user3";
 			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
 			default-state = "off";
 		};
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x20000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		reg_1p0v: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "1P0V";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-always-on;
-		};
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
 
-		reg_3p3v: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
 
-		reg_5p0v: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			regulator-name = "5P0V";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-always-on;
-		};
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
 	};
 };
 
@@ -106,6 +139,103 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
 	eeprom1: eeprom@50 {
 		compatible = "atmel,24c02";
 		reg = <0x50>;
@@ -130,13 +260,6 @@
 		pagesize = <16>;
 	};
 
-	gpio: pca9555@23 {
-		compatible = "nxp,pca9555";
-		reg = <0x23>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
 	rtc: ds1672@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
@@ -148,6 +271,81 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): ENET-PHY */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -164,6 +362,18 @@
 	status = "okay";
 };
 
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
@@ -185,83 +395,125 @@
 	status = "okay";
 };
 
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
 &iomuxc {
-	imx6qdl-gw552x {
-		pinctrl_gpio_leds: gpioledsgrp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
-				MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
-			>;
-		};
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
 
-		pinctrl_gpmi_nand: gpminandgrp {
-			fsl,pins = <
-				MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
-				MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
-				MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
-				MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
-				MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
-				MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
-				MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
-				MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
-				MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
-				MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
-				MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
-				MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
-				MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
-				MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
-				MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
-				MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
-			>;
-		};
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
 
-		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
-				MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
 
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
-				MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_i2c3: i2c3grp {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
-			>;
-		};
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
 
-		pinctrl_pcie: pciegrp {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
-			>;
-		};
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
 
-		pinctrl_uart2: uart2grp {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
 
-		pinctrl_uart3: uart3grp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-			>;
-		};
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
+		>;
+	};
 
-		pinctrl_uart5: uart5grp {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
-				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
-			>;
-                };
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
 	};
 };
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
new file mode 100644
index 000000000000..7f16c602cc07
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -0,0 +1,738 @@
+/*
+ * Copyright 2016 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8a";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0b";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_an1";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc: ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_3P3 (1+R1/R2 = 1.281) */
+			reg_3p3v: sw4 {
+				regulator-name = "vdd3p3";
+				regulator-min-microvolt = <1880000>;
+				regulator-max-microvolt = <3647000>;
+				lltc,fb-voltage-divider = <200000 56200>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8a (1+R1/R2 = 2.505): Analog Video Decoder */
+			reg_1p8a: ldo2 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1816125>;
+				regulator-max-microvolt = <1816125>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8b: microSD VDD_1P8 */
+			reg_1p8b: ldo3 {
+				regulator-name = "vdd1p8b";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	adv7180: camera@20 {
+		compatible = "adi,adv7180";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_adv7180>;
+		reg = <0x20>;
+		powerdown-gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+		port {
+			adv7180_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_adv7180: adv7180grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x0001b0b0
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20     0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+			MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+			MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10		0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* OTG_PWR_EN */
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
new file mode 100644
index 000000000000..46cf4080fec3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -0,0 +1,931 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		ssi0 = &ssi1;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight-display {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	backlight-keypad {
+		compatible = "gpio-backlight";
+		gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		default-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_12p0v: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1p4v: regulator-vddsoc {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_soc";
+		regulator-min-microvolt = <1400000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-ventana-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "sgtl5000-audio";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <4>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+
+			channel@26 {
+				gw,mode = <1>;
+				reg = <0x26>;
+				label = "vdd_gps";
+			};
+
+			channel@29 {
+				gw,mode = <1>;
+				reg = <0x29>;
+				label = "vdd_an2";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_1p8v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_keypad>;
+		reg = <0x34>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		linux,keymap = < MATRIX_KEY(0x00, 0x01, BTN_0)
+			         MATRIX_KEY(0x00, 0x00, BTN_1)
+			         MATRIX_KEY(0x01, 0x01, BTN_2)
+			         MATRIX_KEY(0x01, 0x00, BTN_3)
+			         MATRIX_KEY(0x02, 0x00, BTN_4)
+			         MATRIX_KEY(0x00, 0x03, BTN_5)
+			         MATRIX_KEY(0x00, 0x02, BTN_6)
+			         MATRIX_KEY(0x01, 0x03, BTN_7)
+			         MATRIX_KEY(0x01, 0x02, BTN_8)
+			         MATRIX_KEY(0x02, 0x02, BTN_9)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.931) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <796551>;
+				regulator-max-microvolt = <1544827>;
+				lltc,fb-voltage-divider = <243000 261000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GPS/VideoIn/ENET-PHY */
+			reg_1p8v: sw4 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.39): PCIe/ENET-PHY */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <950000>;
+				regulator-max-microvolt = <1050000>;
+				lltc,fb-voltage-divider = <78700 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_AUD_1P8: Audio codec */
+			reg_aud_1p8v: ldo3 {
+				regulator-name = "vdd1p8a";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	fsl,dual-channel;
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio4 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			/* AUD4 */
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* AUD4_MCK */
+			/* AUD6 */
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_flexcan: flexcangrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0 /* CAN_STBY */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x4001b0b0 /* DIOI2C_DIS# */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x0001b0b0 /* LVDS_TOUCH_IRQ# */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x0001b0b0 /* LVDS_BACKEN */
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b0
+		>;
+	};
+
+	pinctrl_keypad: keypadgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x0001b0b0 /* KEYPAD_IRQ# */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x0001b0b0 /* KEYPAD_LED_EN */
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0    /* PCI_RST# */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b0 /* PCIESKT_WDIS# */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x4001b0b1 /* TEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x4001b0b0 /* USBHUB_RST# */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_D4__SD2_DATA4		0x170f9
+			MX6QDL_PAD_NANDF_D5__SD2_DATA5		0x170f9
+			MX6QDL_PAD_NANDF_D6__SD2_DATA6		0x170f9
+			MX6QDL_PAD_NANDF_D7__SD2_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
new file mode 100644
index 000000000000..a74cde050158
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -0,0 +1,793 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <
+			0  1  2  3  4  5  6  7  8  9
+			10 11 12 13 14 15 16 17 18 19
+			20 21 22 23 24 25 26 27 28 29
+			30 31 32 33 34 35 36 37 38 39
+			40 41 42 43 44 45 46 47 48 49
+			50 51 52 53 54 55 56 57 58 59
+			60 61 62 63 64 65 66 67 68 69
+			70 71 72 73 74 75 76 77 78 79
+			80 81 82 83 84 85 86 87 88 89
+			90 91 92 93 94 95 96 97 98 99
+			100
+			>;
+		default-brightness-level = <100>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 30 0>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_12p0: regulator-12p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "12P0V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320";
+		model = "imx-tlv320";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic3105>;
+		/* routing of sink, source */
+		audio-routing =
+			/* TLV320 LINE1L pin <-> Mic Jack connector */
+			"LINE1L", "Mic Jack",
+			/* board Headphone Jack <-> HPOUT */
+			"Headphone Jack", "HPLOUT",
+			"Headphone Jack", "HPROUT",
+			"Mic Jack", "Mic Bias";
+		mux-int-port = <1>;
+		mux-ext-port = <6>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_1P8 (1+R1/R2 = 2.505): Aud/eMMC/microSD/Touch */
+			reg_1p8v: sw1 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw2 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_arm>;
+			};
+
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw4 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+				linux,phandle = <&reg_vdd_soc>;
+			};
+
+			/* VDD_1P0 (1+R1/R2 = 1.38): */
+			reg_1p0v: ldo2 {
+				regulator-name = "vdd1p0";
+				regulator-min-microvolt = <1002777>;
+				regulator-max-microvolt = <1002777>;
+				lltc,fb-voltage-divider = <100000 261000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	tlv320aic3105: codec@18 {
+		compatible = "ti,tlv320aic3x";
+		reg = <0x18>;
+		reset-gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		ai3x-micbias-vg = <2>; /* MICBIAS_2_5V */
+		/* Regulators */
+		DRVDD-supply = <&reg_3p3v>;
+		AVDD-supply = <&reg_3p3v>;
+		IOVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_1p8v>;
+	};
+
+	accelerometer@1d {
+		compatible = "fsl,mma8451";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "INT2";
+	};
+
+	/* headphone detect */
+	ts3a227e@3b {
+		compatible = "ti,ts3a227e";
+		reg = <0x3b>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+		ti,micbias = <4>; /* 2.5V micbias */
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: g101evn010 {
+				clock-frequency = <68930000>;
+				hactive = <1280>;
+				vactive = <800>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1_200mhz>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	max-frequency = <100000000>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__AUD6_TXD		0x130b0
+			MX6QDL_PAD_DI0_PIN3__AUD6_TXFS		0x130b0
+			MX6QDL_PAD_DI0_PIN4__AUD6_RXD		0x130b0
+			MX6QDL_PAD_DI0_PIN15__AUD6_TXC		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* MCK */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x4001b0b0 /* PHY_EN */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0001b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* I2C3 */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+
+			/* Headphone Detect */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x0001b0b0 /* HPDET_IRQ# */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x0001b0b0 /* HPDET_MIC# */
+
+			/* Codec */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x0001b0b0 /* CODEC_RST# */
+
+			/* Touch Controller */
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x0001b0b0 /* TOUCH_IRQ# */
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x0001b0b0 /* TOUCH_RST */
+
+			/* Stow Sensor */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x0001b0b0 /* ACCEL_IRQ2 */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x0001b0b0 /* ACCEL_IRQ1 */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* TXEN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x4001b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x4001b0b0 /* EMMY_EN */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x4001b0b0 /* EMMY_CFG1# */
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05		0x4001b0b0 /* EMMY_CFG2# */
+			MX6QDL_PAD_NANDF_D6__GPIO2_IO06		0x0001b0b0 /* EMMY_BTWAKE# */
+			MX6QDL_PAD_NANDF_D7__GPIO2_IO07		0x0001b0b0 /* EMMY_WFWAKE# */
+
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x17059 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170b9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170f9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100f9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x170f9 /* CD */
+			MX6QDL_PAD_KEY_ROW1__SD2_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
new file mode 100644
index 000000000000..9fc79af2bc9a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -0,0 +1,815 @@
+/*
+ * Copyright 2017 Gateworks Corporation
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of
+ *     the License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this file; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_1p0v: regulator-1p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P0V";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@0 {
+			compatible = "marvell,mv88e6085";
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan4";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan3";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan1";
+				};
+
+				port@5 {
+					reg = <5>;
+					label = "cpu";
+					ethernet = <&fec>;
+				};
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom1: eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom3: eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom4: eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	dts1672: rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	ltc3676: pmic@3c {
+		compatible = "lltc,ltc3676";
+		reg = <0x3c>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+
+		regulators {
+			/* VDD_SOC (1+R1/R2 = 1.635) */
+			reg_vdd_soc: sw1 {
+				regulator-name = "vddsoc";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */
+			reg_1p8v: sw2 {
+				regulator-name = "vdd1p8";
+				regulator-min-microvolt = <1033310>;
+				regulator-max-microvolt = <2004000>;
+				lltc,fb-voltage-divider = <301000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_ARM (1+R1/R2 = 1.635) */
+			reg_vdd_arm: sw3 {
+				regulator-name = "vddarm";
+				regulator-min-microvolt = <674400>;
+				regulator-max-microvolt = <1308000>;
+				lltc,fb-voltage-divider = <127000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_DDR (1+R1/R2 = 2.105) */
+			reg_vdd_ddr: sw4 {
+				regulator-name = "vddddr";
+				regulator-min-microvolt = <868310>;
+				regulator-max-microvolt = <1684000>;
+				lltc,fb-voltage-divider = <221000 200000>;
+				regulator-ramp-delay = <7000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */
+			reg_2p5v: ldo2 {
+				regulator-name = "vdd2p5";
+				regulator-min-microvolt = <2490375>;
+				regulator-max-microvolt = <2490375>;
+				lltc,fb-voltage-divider = <487000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_HIGH (1+R1/R2 = 4.17) */
+			reg_3p0v: ldo4 {
+				regulator-name = "vdd3p0";
+				regulator-min-microvolt = <3023250>;
+				regulator-max-microvolt = <3023250>;
+				lltc,fb-voltage-divider = <634000 200000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	crypto@60 {
+		compatible = "atmel,atecc508a";
+		reg = <0x60>;
+	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	egalax_ts: touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		display-timings {
+			native-mode = <&timing0>;
+			timing0: hsd100pxn1 {
+				clock-frequency = <65000000>;
+				hactive = <1024>;
+				vactive = <768>;
+				hback-porch = <220>;
+				hfront-porch = <40>;
+				vback-porch = <21>;
+				vfront-porch = <7>;
+				hsync-len = <60>;
+				vsync-len = <10>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x4001b0b0 /* PHY_RST# */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0 /* GSC_IRQ# */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* PMIC_IRQ# */
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B         0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B         0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA    0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B      0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B      0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0 /* PWR_EN */
+			MX6QDL_PAD_KEY_COL4__GPIO4_IO14		0x1b0b0 /* OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170b9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170b9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170b9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x170f9
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x170f9
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x170f9
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
new file mode 100644
index 000000000000..955a51226eda
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -0,0 +1,536 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_an1";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	ds1672@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	adc@48 {
+		compatible = "ti,ads1015";
+		reg = <0x48>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <0>;
+			ti,datarate = <5>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
new file mode 100644
index 000000000000..218d6e667ed2
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -0,0 +1,664 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_wl: regulator-wl {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_wl>;
+		compatible = "regulator-fixed";
+		regulator-name = "wl";
+		gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <100>;
+		enable-active-high;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_3p0";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_arm";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_soc";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p5";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_1p8";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_1p0";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@9c {
+				gw,mode = <2>;
+				reg = <0x9c>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+/* off-board RS232 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* serial console */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+/* cc1352 */
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* Sterling-LWB Bluetooth */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+/* GPS */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* Sterling-LWB SDIO WiFi */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_wl>;
+	non-removable;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: escpi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x100b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_wl: regwlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x4001b0b1 /* DIO20 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x4001b0b1 /* DIO14 */
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x4001b0b1 /* DIO15 */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1 /* TMS */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1 /* TCK */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1 /* TDO */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1 /* TDI */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x4001b0b1 /* RST# */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x170b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
new file mode 100644
index 000000000000..40e235e315cc
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -0,0 +1,606 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		led2 = &led2;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+
+		led2: led-user3 {
+			label = "user3";
+			gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_vbus: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@0 {
+				gw,mode = <0>;
+				reg = <0x00>;
+				label = "temp";
+			};
+
+			channel@2 {
+				gw,mode = <1>;
+				reg = <0x02>;
+				label = "vdd_vin";
+			};
+
+			channel@5 {
+				gw,mode = <1>;
+				reg = <0x05>;
+				label = "vdd_3p3";
+			};
+
+			channel@8 {
+				gw,mode = <1>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@b {
+				gw,mode = <1>;
+				reg = <0x0b>;
+				label = "vdd_5p0";
+			};
+
+			channel@e {
+				gw,mode = <1>;
+				reg = <0xe>;
+				label = "vdd_arm";
+			};
+
+			channel@11 {
+				gw,mode = <1>;
+				reg = <0x11>;
+				label = "vdd_soc";
+			};
+
+			channel@14 {
+				gw,mode = <1>;
+				reg = <0x14>;
+				label = "vdd_3p0";
+			};
+
+			channel@17 {
+				gw,mode = <1>;
+				reg = <0x17>;
+				label = "vdd_1p5";
+			};
+
+			channel@1d {
+				gw,mode = <1>;
+				reg = <0x1d>;
+				label = "vdd_1p8";
+			};
+
+			channel@20 {
+				gw,mode = <1>;
+				reg = <0x20>;
+				label = "vdd_1p0";
+			};
+
+			channel@23 {
+				gw,mode = <1>;
+				reg = <0x23>;
+				label = "vdd_2p5";
+			};
+		};
+
+		fan-controller@a {
+			compatible = "gw,gsc-fan";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0a>;
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	accel@19 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_accel>;
+		compatible = "st,lis2de12";
+		reg = <0x19>;
+		st,drdy-int-pin = <1>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <13 0>;
+		interrupt-names = "INT1";
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
+	status = "disabled";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	no-1-8-v; /* firmware will remove if board revision supports */
+	status = "okay";
+};
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_accel: accelmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: escpi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x100b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x4001b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x4001b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x13059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x17059 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x17059
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170b9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100b9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170b9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170b9
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x170f9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x100f9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x170f9 /* CD */
+			MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x170f9
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__WDOG2_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
new file mode 100644
index 000000000000..82f47c295b08
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -0,0 +1,498 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Gateworks Corporation
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	/* these are used by bootloader for disabling nodes */
+	aliases {
+		led0 = &led0;
+		led1 = &led1;
+		nand = &gpmi;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		user-pb {
+			label = "user_pb";
+			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
+			linux,code = <BTN_0>;
+		};
+
+		user-pb1x {
+			label = "user_pb1x";
+			linux,code = <BTN_1>;
+			interrupt-parent = <&gsc>;
+			interrupts = <0>;
+		};
+
+		key-erased {
+			label = "key-erased";
+			linux,code = <BTN_2>;
+			interrupt-parent = <&gsc>;
+			interrupts = <1>;
+		};
+
+		eeprom-wp {
+			label = "eeprom_wp";
+			linux,code = <BTN_3>;
+			interrupt-parent = <&gsc>;
+			interrupts = <2>;
+		};
+
+		tamper {
+			label = "tamper";
+			linux,code = <BTN_4>;
+			interrupt-parent = <&gsc>;
+			interrupts = <5>;
+		};
+
+		switch-hold {
+			label = "switch_hold";
+			linux,code = <BTN_5>;
+			interrupt-parent = <&gsc>;
+			interrupts = <7>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led0: led-user1 {
+			label = "user1";
+			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led1: led-user2 {
+			label = "user2";
+			gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
+			default-state = "off";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	pps {
+		compatible = "pps-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pps>;
+		gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_5p0v: regulator-5p0v {
+		compatible = "regulator-fixed";
+		regulator-name = "5P0V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	gsc: gsc@20 {
+		compatible = "gw,gsc";
+		reg = <0x20>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		#size-cells = <0>;
+
+		adc {
+			compatible = "gw,gsc-adc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			channel@6 {
+				gw,mode = <0>;
+				reg = <0x06>;
+				label = "temp";
+			};
+
+			channel@8 {
+				gw,mode = <3>;
+				reg = <0x08>;
+				label = "vdd_bat";
+			};
+
+			channel@82 {
+				gw,mode = <2>;
+				reg = <0x82>;
+				label = "vdd_vin";
+				gw,voltage-divider-ohms = <22100 1000>;
+				gw,voltage-offset-microvolt = <800000>;
+			};
+
+			channel@84 {
+				gw,mode = <2>;
+				reg = <0x84>;
+				label = "vdd_5p0";
+				gw,voltage-divider-ohms = <22100 10000>;
+			};
+
+			channel@86 {
+				gw,mode = <2>;
+				reg = <0x86>;
+				label = "vdd_3p3";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@88 {
+				gw,mode = <2>;
+				reg = <0x88>;
+				label = "vdd_2p5";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@8c {
+				gw,mode = <2>;
+				reg = <0x8c>;
+				label = "vdd_arm";
+			};
+
+			channel@8e {
+				gw,mode = <2>;
+				reg = <0x8e>;
+				label = "vdd_soc";
+			};
+
+			channel@90 {
+				gw,mode = <2>;
+				reg = <0x90>;
+				label = "vdd_1p5";
+			};
+
+			channel@92 {
+				gw,mode = <2>;
+				reg = <0x92>;
+				label = "vdd_1p0";
+			};
+
+			channel@98 {
+				gw,mode = <2>;
+				reg = <0x98>;
+				label = "vdd_3p0";
+			};
+
+			channel@9a {
+				gw,mode = <2>;
+				reg = <0x9a>;
+				label = "vdd_an1";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+
+			channel@a2 {
+				gw,mode = <2>;
+				reg = <0xa2>;
+				label = "vdd_gsc";
+				gw,voltage-divider-ohms = <10000 10000>;
+			};
+		};
+	};
+
+	gsc_gpio: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&gsc>;
+		interrupts = <4>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+
+	eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c02";
+		reg = <0x52>;
+		pagesize = <16>;
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+
+	rtc@68 {
+		compatible = "dallas,ds1672";
+		reg = <0x68>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
+	status = "disabled";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
+	status = "disabled";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
+	status = "disabled";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06		0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x0001b0b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_pps: ppsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
index 62a82f3eba88..2ffb21dd89f2 100644
--- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi
@@ -10,17 +10,17 @@
  *     modify it under the terms of the GNU General Public License
  *     version 2 as published by the Free Software Foundation.
  *
- *     This file is distributed in the hope that it will be useful
+ *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- * Or, alternatively
+ * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
+ *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
@@ -29,75 +29,110 @@
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
-#include "imx6qdl-microsom.dtsi"
-#include "imx6qdl-microsom-ar8035.dtsi"
+#include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
 	chosen {
 		stdout-path = &uart1;
 	};
 
 	ir_recv: ir-receiver {
 		compatible = "gpio-ir-receiver";
-		gpios = <&gpio3 5 1>;
+		gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+		vin-supply = <&v_5v0>;
+	};
 
-		reg_3p3v: 3p3v {
-			compatible = "regulator-fixed";
-			regulator-name = "3P3V";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
 
-		reg_usbh1_vbus: usb-h1-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio1 0 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
 
-		reg_usbotg_vbus: usb-otg-vbus {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 22 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-		};
+	v_usb2: regulator-v-usb2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
 	};
 
-	sound-sgtl5000 {
-		audio-codec = <&sgtl5000>;
-		audio-routing =
-			"MIC_IN", "Mic Jack",
-			"Mic Jack", "Mic Bias",
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Headphone Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Headphone Jack",
+			"Headphone Jack", "Mic Bias",
 			"Headphone Jack", "HP_OUT";
-		compatible = "fsl,imx-audio-sgtl5000";
-		model = "On-board Codec";
-		mux-ext-port = <5>;
-		mux-int-port = <1>;
-		ssi-controller = <&ssi1>;
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
 	};
 
 	sound-spdif {
@@ -111,6 +146,26 @@
 
 &audmux {
 	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
 };
 
 &can1 {
@@ -132,20 +187,21 @@
 	status = "okay";
 
 	/* Pro baseboard model */
-	rtc: pcf8523@68 {
+	rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
 
 	/* Pro baseboard model */
-	sgtl5000: sgtl5000@0a {
+	sgtl5000: codec@a {
 		clocks = <&clks IMX6QDL_CLK_CKO>;
 		compatible = "fsl,sgtl5000";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>;
+		#sound-dai-cells = <0>;
 		reg = <0x0a>;
-		VDDA-supply = <&reg_3p3v>;
-		VDDIO-supply = <&reg_3p3v>;
+		VDDA-supply = <&v_3v2>;
+		VDDIO-supply = <&v_3v2>;
 	};
 };
 
@@ -221,10 +277,9 @@
 
 		pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id {
 			/*
-			 * Similar to pinctrl_usbotg_2, but we want it
-			 * pulled down for a fixed host connection.
+			 * We want it pulled down for a fixed host connection.
 			 */
-			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+			fsl,pins = <MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059>;
 		};
 
 		pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus {
@@ -247,13 +302,18 @@
 				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
 			>;
 		};
+		pinctrl_hummingboard_vmmc: hummingboard-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
 	};
 };
 
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>;
-	reset-gpio = <&gpio3 4 0>;
+	reset-gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
 
@@ -280,7 +340,7 @@
 
 &usbh1 {
 	disable-over-current;
-	vbus-supply = <&reg_usbh1_vbus>;
+	vbus-supply = <&v_usb2>;
 	status = "okay";
 };
 
@@ -288,7 +348,7 @@
 	disable-over-current;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>;
-	vbus-supply = <&reg_usbotg_vbus>;
+	vbus-supply = <&v_usb1>;
 	status = "okay";
 };
 
@@ -298,7 +358,11 @@
 		&pinctrl_hummingboard_usdhc2_aux
 		&pinctrl_hummingboard_usdhc2
 	>;
-	vmmc-supply = <&reg_3p3v>;
-	cd-gpios = <&gpio1 4 0>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	status = "okay";
 };
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
new file mode 100644
index 000000000000..f400405381a7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2-emmc.dtsi
@@ -0,0 +1,72 @@
+/*
+ * Device Tree file for SolidRun HummingBoard2
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	hummingboard2 {
+		pinctrl_hummingboard2_usdhc3: hummingboard2-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usdhc3>;
+	vmmc-supply = <&v_3v2>;
+	vqmmc-supply = <&v_3v2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
new file mode 100644
index 000000000000..eb1ad28946d3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi
@@ -0,0 +1,577 @@
+/*
+ * Copyright (C) 2015 Rabeeh Khoury <rabeeh@solid-run.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	/* Will be filled by the bootloader */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0>;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ir_recv: ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio7 9 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_gpio7_9>;
+		linux,rc-map-name = "rc-rc6-mce";
+	};
+
+	v_3v2: regulator-v-3v2 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_3v2";
+	};
+
+	v_5v0: regulator-v-5v0 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_5v0";
+	};
+
+	vcc_1p8: regulator-vcc-1p8 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vcc_1p8";
+		vin-supply = <&v_3v2>;
+	};
+
+	v_sd: regulator-v-sd {
+		compatible = "regulator-fixed";
+		gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_vmmc>;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "v_sd";
+		startup-delay-us = <1000>;
+		vin-supply = <&v_3v2>;
+	};
+
+	v_usb1: regulator-v-usb1 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbotg_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb1";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb2: regulator-v-usb2 {
+		/* USB hub port 1 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh1_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb2";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb3: regulator-v-usb3 {
+		/* USB hub port 3 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh2_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb3";
+		vin-supply = <&v_5v0>;
+	};
+
+	v_usb4: regulator-v-usb4 {
+		/* USB hub port 4 */
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_usbh3_vbus>;
+		regulator-always-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "v_usb4";
+		vin-supply = <&v_5v0>;
+	};
+
+	audio: sound-sgtl5000 {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "On-board Codec";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sound_codec>;
+		simple-audio-card,frame-master = <&sound_codec>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		sound_cpu: simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		sound_codec: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			 IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(4) |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+		>;
+	};
+
+	pins5 {
+		fsl,audmux-port = <4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+		>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c1>;
+	status = "okay";
+
+	pcf8523: rtc@68 {
+		compatible = "nxp,pcf8523";
+		reg = <0x68>;
+	};
+
+	sgtl5000: codec@a {
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		compatible = "fsl,sgtl5000";
+		#sound-dai-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>;
+		reg = <0x0a>;
+		VDDA-supply = <&v_3v2>;
+		VDDD-supply = <&vcc_1p8>;
+		VDDIO-supply = <&v_3v2>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_i2c3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	hummingboard2 {
+		pinctrl_hog: hoggrp {
+		fsl,pins = <
+				/*
+				 * 36 pin headers GPIO description. The pins
+				 * numbering as following -
+				 *
+				 * 	3.2v	5v	74	75
+				 *	73	72	71	70
+				 *	69	68	67	66
+				 *
+				 *	77	78	79	76
+				 *	65	64	61	60
+				 *	53	52	51	50
+				 *	49	48	166	132
+				 *	95	94	90	91
+				 *	GND	54	24	204
+				 *
+				 * The GPIO numbers can be extracted using
+				 * signal name from below.
+				 * Example -
+				 * MX6QDL_PAD_EIM_DA10__GPIO3_IO10 is
+				 * GPIO(3,10) which is (3-1)*32+10 = gpio 74
+				 *
+				 * i.e. The mapping of GPIO(X,Y) to Linux gpio
+				 * number is : gpio number = (X-1) * 32 + Y
+				 */
+				/* DI1_PIN15 */
+				MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x400130b1
+				/* DI1_PIN02 */
+				MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x400130b1
+				/* DISP1_DATA00 */
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x400130b1
+				/* DISP1_DATA01 */
+				MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x400130b1
+				/* DISP1_DATA02 */
+				MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x400130b1
+				/* DISP1_DATA03 */
+				MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x400130b1
+				/* DISP1_DATA04 */
+				MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x400130b1
+				/* DISP1_DATA05 */
+				MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x400130b1
+				/* DISP1_DATA06 */
+				MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x400130b1
+				/* DISP1_DATA07 */
+				MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x400130b1
+				/* DI1_D0_CS */
+				MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x400130b1
+				/* DI1_D1_CS */
+				MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x400130b1
+				/* DI1_PIN01 */
+				MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x400130b1
+				/* DI1_PIN03 */
+				MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x400130b1
+				/* DISP1_DATA08 */
+				MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x400130b1
+				/* DISP1_DATA09 */
+				MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x400130b1
+				/* DISP1_DATA10 */
+				MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x400130b1
+				/* DISP1_DATA11 */
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28 0x400130b1
+				/* DISP1_DATA12 */
+				MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x400130b1
+				/* DISP1_DATA13 */
+				MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x400130b1
+				/* DISP1_DATA14 */
+				MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x400130b1
+				/* DISP1_DATA15 */
+				MX6QDL_PAD_EIM_A20__GPIO2_IO18 0x400130b1
+				/* DISP1_DATA16 */
+				MX6QDL_PAD_EIM_A21__GPIO2_IO17 0x400130b1
+				/* DISP1_DATA17 */
+				MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x400130b1
+				/* DISP1_DATA18 */
+				MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x400130b1
+				/* DISP1_DATA19 */
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x400130b1
+				/* DISP1_DATA20 */
+				MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x400130b1
+				/* DISP1_DATA21 */
+				MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x400130b1
+				/* DISP1_DATA22 */
+				MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x400130b1
+				/* DISP1_DATA23 */
+				MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x400130b1
+				/* DI1_DISP_CLK */
+				MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x400130b1
+				/* SPDIF_IN */
+				MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24 0x400130b1
+				/* SPDIF_OUT */
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x400130b1
+
+				/* MikroBUS GPIO pin number 10 */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1
+			>;
+		};
+
+		pinctrl_hummingboard2_ecspi2: hummingboard2-ecspi2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_OE__ECSPI2_MISO	0x100b1
+				MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI	0x100b1
+				MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK	0x100b1
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26	0x000b1 /* CS */
+			>;
+		};
+
+		pinctrl_hummingboard2_gpio7_9: hummingboard2-gpio7_9 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__GPIO7_IO09 0x80000000
+			>;
+		};
+
+		pinctrl_hummingboard2_hdmi: hummingboard2-hdmi {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c1: hummingboard2-i2c1 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c2: hummingboard2-i2c2 {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_i2c3: hummingboard2-i2c3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+				MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			>;
+		};
+
+		pinctrl_hummingboard2_mipi: hummingboard2_mipi {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x4001b8b1
+				MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x4001b8b1
+				MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_pcie_reset: hummingboard2-pcie-reset {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+			>;
+		};
+
+		pinctrl_hummingboard2_sgtl5000: hummingboard2-sgtl5000 {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+				MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0
+				MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0
+				MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0
+				MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+			>;
+		};
+
+		pinctrl_hummingboard2_usbh1_vbus: hummingboard2-usbh1-vbus {
+			fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh2_vbus: hummingboard2-usbh2-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbh3_vbus: hummingboard2-usbh3-vbus {
+			fsl,pins = <MX6QDL_PAD_SD4_CLK__GPIO7_IO10 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usbotg_id: hummingboard2-usbotg-id {
+			/*
+			 * We want it pulled down for a fixed host connection.
+			 */
+			fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>;
+		};
+
+		pinctrl_hummingboard2_usbotg_vbus: hummingboard2-usbotg-vbus {
+			fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_aux: hummingboard2-usdhc2-aux {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04    0x1f071
+				MX6QDL_PAD_KEY_ROW1__SD2_VSELECT 0x1b071
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2: hummingboard2-usdhc2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_100mhz: hummingboard2-usdhc2-100mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130b9
+			>;
+		};
+
+		pinctrl_hummingboard2_usdhc2_200mhz: hummingboard2-usdhc2-200mhz {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD    0x170f9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK    0x100f9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x130f9
+			>;
+		};
+
+		pinctrl_hummingboard2_vmmc: hummingboard2-vmmc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+			>;
+		};
+
+		pinctrl_hummingboard2_uart3: hummingboard2-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D25__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D24__UART3_RX_DATA	0x40013000
+			>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pcie_reset>;
+	reset-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	disable-over-current;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_usbotg_id>;
+	vbus-supply = <&v_usb1>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2
+	>;
+	pinctrl-1 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_100mhz
+	>;
+	pinctrl-2 = <
+		&pinctrl_hummingboard2_usdhc2_aux
+		&pinctrl_hummingboard2_usdhc2_200mhz
+	>;
+	vmmc-supply = <&v_sd>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard2_uart3>;
+	status = "okay";
+};
+
+&vcc_3v3 {
+	vin-supply = <&v_3v2>;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
new file mode 100644
index 000000000000..0fd7f2e24d9c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Jacopo Mondi <jacopo@jmondi.org>
+ */
+
+#include "imx6qdl-icore.dtsi"
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
new file mode 100644
index 000000000000..a4217f564a53
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2015 Amarula Solutions B.V.
+ * Copyright (C) 2015 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_sd3_vmmc: regulator-sd3-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD3_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		enable-active-high;
+	};
+
+	reg_sd4_vmmc: regulator-sd4-vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "P3V3_SD4_SWITCHED";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	usb_hub: usb-hub {
+		compatible = "smsc,usb3503a";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbhub>;
+		reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		clocks = <&clks IMX6QDL_CLK_LVDS2_GATE>;
+		clock-names = "refclk";
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-rqs-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0x0>;
+			rxc-skew-ps = <1140>;
+			txc-skew-ps = <1140>;
+			txen-skew-ps = <600>;
+			rxdv-skew-ps = <240>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <600>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <240>;
+			txd0-skew-ps = <60>;
+			txd1-skew-ps = <60>;
+			txd2-skew-ps = <60>;
+			txd3-skew-ps = <240>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	clocks = <&clks IMX6QDL_CLK_USBOH3>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmcc-supply = <&reg_sd3_vmmc>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+	vmcc-supply = <&reg_sd4_vmmc>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN     0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1f059	/* PCIe Reset */
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbhub: usbhubgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06  0x1f059	/* HUB USB Reset */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17070
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10070
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17070
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17070
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17070
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1f059	/* CD */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1f059	/* PWR */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170B1
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100B1
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170B1
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170B1
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170B1
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x170F9
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x100F9
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170F9
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170F9
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170F9
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170F9
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x17070
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x10070
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17070
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17070
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17070
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17070
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17070
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17070
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17070
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17070
+		>;
+	};
+
+	pinctrl_usdhc4_100mhz: usdhc4grp_100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170B1
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100B1
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170B1
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170B1
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170B1
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170B1
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170B1
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170B1
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170B1
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170B1
+		>;
+	};
+
+	pinctrl_usdhc4_200mhz: usdhc4grp_200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD    0x170F9
+			MX6QDL_PAD_SD4_CLK__SD4_CLK    0x100F9
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x170F9
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x170F9
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x170F9
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x170F9
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x170F9
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x170F9
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x170F9
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x170F9
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
new file mode 100644
index 000000000000..23c318d9636f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright (C) 2016 Amarula Solutions B.V.
+ * Copyright (C) 2016 Engicam S.r.l.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x80000000>;
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	backlight_lvds: backlight-lvds {
+		compatible = "pwm-backlight";
+		pwms = <&pwm3 0 100000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	rmii_clk: clock-rmii-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;  /* 25MHz for example */
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "imx6qdl-icore-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&dailink_master>;
+		simple-audio-card,frame-master = <&dailink_master>;
+		simple-audio-card,widgets =
+			"Microphone", "Mic Jack",
+			"Headphone", "Headphone Jack",
+			"Line", "Line In Jack",
+			"Speaker", "Line Out Jack",
+			"Speaker", "Ext Spk";
+		simple-audio-card,routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+		};
+
+		dailink_master: simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_TCLKDIR |
+			IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			IMX_AUDMUX_V2_PTCR_SYN)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_aud4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_3p3v>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LVDS2_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_OSC>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	clocks = <&clks IMX6QDL_CLK_ENET>, <&clks IMX6QDL_CLK_ENET>, <&rmii_clk>;
+	phy-mode = "rmii";
+	phy-handle = <&eth_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <4000>;
+			reset-deassert-us = <4000>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_3p3v>;
+		DVDD-supply = <&reg_3p3v>;
+		powerdown-gpios = <&gpio5 30 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	sgtl5000: codec@a {
+		#sound-dai-cells = <0>;
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+		VDDD-supply = <&reg_1p8v>;
+	};
+};
+
+&mipi_csi {
+	status = "disabled";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pwm3 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&ssi1 {
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC  0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD  0x110b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD  0x130b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__GPIO1_IO23	0x1b0b0
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b020
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b020
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b020
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b020
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE     0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE     0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B   0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B   0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B   0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B      0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B      0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00   0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01   0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02   0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03   0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04   0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05   0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06   0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07   0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS      0x00b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL  0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL  0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+		>;
+	};
+
+	pinctrl_ov5640: ov5640grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1	  0x130b0
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17070
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10070
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
new file mode 100644
index 000000000000..85aeebc9485d
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -0,0 +1,821 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2017 (C) Priit Laes <plaes@plaes.org>
+ * Copyright 2018 (C) Pengutronix, Michael Grzeschik <mgr@pengutronix.de>
+ * Copyright 2019 (C) Pengutronix, Marco Felsch <kernel@pengutronix.de>
+ *
+ * Based on initial work by Nikita Yushchenko <nyushchenko at dev.rtsoft.ru>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	reg_1p0v_s0: regulator-1p0v-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V0_S0";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_smarc_suppy>;
+	};
+
+	reg_1p35v_vcoredig_s5: regulator-1p35v-vcoredig-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V35_VCOREDIG_S5";
+		regulator-min-microvolt = <1350000>;
+		regulator-max-microvolt = <1350000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_1p8v_s5: regulator-1p8v-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8_S5";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_3p3v_s0: regulator-3p3v-s0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_3p3v_s5>;
+	};
+
+	reg_3p3v_s5: regulator-3p3v-s5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_S5";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&reg_smarc_suppy>;
+	};
+
+	reg_smarc_lcdbklt: regulator-smarc-lcdbklt {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdbklt_en>;
+		regulator-name = "LCD_BKLT_EN";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_smarc_lcdvdd: regulator-smarc-lcdvdd {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcdvdd_en>;
+		regulator-name = "LCD_VDD_EN";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_smarc_rtc: regulator-smarc-rtc {
+		compatible = "regulator-fixed";
+		regulator-name = "V_IN_RTC_BATT";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/* Module supply range can be 3.00V ... 5.25V */
+	reg_smarc_suppy: regulator-smarc-supply {
+		compatible = "regulator-fixed";
+		regulator-name = "V_IN_WIDE";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	lcd: lcd {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_lcd>;
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_in: endpoint {
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_out: endpoint {
+			};
+		};
+	};
+
+	lcd_backlight: lcd-backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000 0>;
+		pwm-names = "LCD_BKLT_PWM";
+
+		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
+		default-brightness-level = <4>;
+
+		power-supply = <&reg_smarc_lcdbklt>;
+		status = "disabled";
+	};
+
+	i2c_intern: i2c-gpio-intern {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_intern>;
+		sda-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c_lcd: i2c-gpio-lcd {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_lcd>;
+		sda-gpios = <&gpio1 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
+	i2c_cam: i2c-gpio-cam {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c_gpio_cam>;
+		sda-gpios = <&gpio4 10 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>; /* ~100 kHz */
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+};
+
+/* I2S0, I2S1 */
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+
+	audmux_ssi1 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT3) |
+			 IMX_AUDMUX_V2_PTCR_SYN    |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT3)
+		>;
+	};
+
+	audmux_adu3 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT1_SSI0)
+		>;
+	};
+
+	audmux_ssi2 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) |
+			 IMX_AUDMUX_V2_PTCR_TCSEL(MX51_AUDMUX_PORT4) |
+			 IMX_AUDMUX_V2_PTCR_SYN    |
+			 IMX_AUDMUX_V2_PTCR_TFSDIR |
+			 IMX_AUDMUX_V2_PTCR_TCLKDIR)
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT4)
+		>;
+	};
+
+	audmux_adu4 {
+		fsl,audmux-port = <MX51_AUDMUX_PORT4>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX51_AUDMUX_PORT2_SSI1)
+		>;
+	};
+};
+
+/* CAN0 */
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+};
+
+/* CAN1 */
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+/* SPI1 */
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		   <&gpio2 27 GPIO_ACTIVE_LOW>;
+};
+
+/* SPI0 */
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>,
+		   <&gpio3 29 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	/* default boot source: workaround #1 for errata ERR006282 */
+	smarc_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+/* GBE */
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+};
+
+&i2c_intern {
+	pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			reg_v_core_s0: sw1ab {
+				regulator-name = "V_CORE_S0";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vddsoc_s0: sw1c {
+				regulator-name = "V_VDDSOC_S0";
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_3p15v_s0: sw2 {
+				regulator-name = "V_3V15_S0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* sw3a/b is used in dual mode, but driver does not
+			 * support it. Although, there's no need to control
+			 * DDR power - so just leaving dummy entries for sw3a
+			 * and sw3b for now.
+			 */
+			sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_1p8v_s0: sw4 {
+				regulator-name = "V_1V8_S0";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* Regulator for USB */
+			reg_5p0v_s0: swbst {
+				regulator-name = "V_5V0_S0";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+				regulator-boot-on;
+			};
+
+			reg_vsnvs: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			reg_vrefddr: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/*
+			 * Per schematics, of all VGEN's, only VGEN5 has some
+			 * usage ... but even that - over DNI resistor
+			 */
+			vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			reg_2p5v_s0: vgen5 {
+				regulator-name = "V_2V5_S0";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};
+
+/* I2C_GP */
+&i2c1 {
+	clock-frequency = <375000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+};
+
+/* HDMI_CTRL */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+};
+
+/* I2C_PM */
+&i2c3 {
+	clock-frequency = <375000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	smarc_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mgmt_gpios &pinctrl_gpio>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+
+			MX6QDL_PAD_DISP0_DAT20__AUD4_TXC	0x130b0
+			MX6QDL_PAD_DISP0_DAT21__AUD4_TXD	0x130b0
+			MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS	0x130b0
+			MX6QDL_PAD_DISP0_DAT23__AUD4_RXD	0x130b0
+
+			/* AUDIO MCLK */
+			MX6QDL_PAD_NANDF_CS2__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO  0x100b1
+
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26  0x1b0b0 /* CS0 */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 /* CS1 */
+		>;
+	};
+
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
+
+			/* SPI_IMX_CS2# - connected to internal flash */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0
+			/* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio: gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x1b0b0	/* GPIO0 / CAM0_PWR# */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01	0x1b0b0 /* GPIO1 / CAM1_PWR# */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02	0x1b0b0 /* GPIO2 / CAM0_RST# */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03	0x1b0b0 /* GPIO3 / CAM1_RST# */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x1b0b0 /* GPIO4 / HDA_RST#  */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05	0x1b0b0 /* GPIO5 / PWM_OUT   */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06	0x1b0b0 /* GPIO6 / TACHIN    */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07	0x1b0b0 /* GPIO7 / PCAM_FLD  */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08	0x1b0b0 /* GPIO8 / CAN0_ERR# */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09	0x1b0b0 /* GPIO9 / CAN1_ERR# */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10	0x1b0b0 /* GPIO10            */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11	0x1b0b0 /* GPIO11            */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25    0x1b0b0 /* RST_GBE0_PHY# */
+		>;
+	};
+
+	pinctrl_i2c_gpio_cam: i2c-gpiocamgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x1b0b0 /* SCL */
+			MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c_gpio_intern: i2c-gpiointerngrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30  0x1b0b0 /* SCL */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c_gpio_lcd: i2c-gpiolcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0 /* SCL */
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b0 /* SDA */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_lcd: lcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00  0x100f1
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01  0x100f1
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02  0x100f1
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03  0x100f1
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04  0x100f1
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05  0x100f1
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06  0x100f1
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07  0x100f1
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08  0x100f1
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09  0x100f1
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x100f1
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x100f1
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x100f1
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x100f1
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x100f1
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x100f1
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x100f1
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x100f1
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x100f1
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x100f1
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x100f1
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x100f1
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x100f1
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x100f1
+
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x100f1
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x100f1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x100f1 /* HSYNC */
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x100f1 /* VSYNC */
+		>;
+	};
+
+	pinctrl_lcdbklt_en: lcdbkltengrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT0__GPIO1_IO16	0x1b0b1
+		>;
+	};
+
+	pinctrl_lcdvdd_en: lcdvddengrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+		>;
+	};
+
+	pinctrl_mipi_csi: mipi-csigrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1	0x000b0	/* CSI0/1 MCLK */
+		>;
+	};
+
+	pinctrl_mgmt_gpios: mgmt-gpiosgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b0	/* LID#           */
+			MX6QDL_PAD_SD3_DAT7__GPIO6_IO17		0x1b0b0	/* SLEEP#         */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0	/* CHARGING#      */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0	/* CHARGER_PRSNT# */
+			MX6QDL_PAD_SD1_CLK__GPIO1_IO20		0x1b0b0	/* CARRIER_STBY#  */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b0	/* BATLOW#        */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0	/* TEST#          */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0	/* VDD_IO_SEL_D#  */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x1b0b0 /* POWER_BTN#     */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D18__GPIO3_IO18	0x1b0b0 /* PCI_A_PRSNT# */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b0 /* RST_PCIE_A#  */
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b0 /* PCIE_WAKE#   */
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1
+			MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x1f8b0
+			/* power, oc muxed but not used by the driver */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0 /* USB power */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0 /* USB OC */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK 0x17059
+			MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
+			MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+		>;
+	};
+
+	pinctrl_wdog1: wdog1rp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__WDOG1_B	0x1b0b0
+		>;
+	};
+};
+
+&mipi_csi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mipi_csi>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>;
+	reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+};
+
+/* LCD_BKLT_PWM */
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+};
+
+&reg_arm {
+	vin-supply = <&reg_v_core_s0>;
+};
+
+&reg_pu {
+	vin-supply = <&reg_vddsoc_s0>;
+};
+
+&reg_soc {
+	vin-supply = <&reg_vddsoc_s0>;
+};
+
+/* SER0 */
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	uart-has-rtscts;
+};
+
+/* SER1 */
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+};
+
+/* SER2 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+};
+
+/* SER3 */
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+};
+
+/* USB0 */
+&usbotg {
+	/*
+	 * no 'imx6-usb-charger-detection'
+	 * since USB_OTG_CHD_B pin is not wired
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+};
+
+/* USB1/2 via hub */
+&usbh1 {
+	vbus-supply = <&reg_5p0v_s0>;
+};
+
+/* SDIO */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+	no-1-8-v;
+};
+
+/* SDMMC */
+&usdhc4 {
+	/* Internal eMMC, optional on some boards */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	vmmc-supply = <&reg_3p3v_s0>;
+	vqmmc-supply = <&reg_1p8v_s0>;
+};
+
+&wdog1 {
+	/* CPLD is feeded by watchdog (hardwired) */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6.dtsi b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
new file mode 100644
index 000000000000..78555a618851
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6.dtsi
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc2;
+		/delete-property/ mmc2;
+		/delete-property/ mmc3;
+		rtc0 = &rtc0;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	beeper: gpio-beeper {
+		compatible = "gpio-beeper";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobeeper>;
+		gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio_buttons: gpio-buttons {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpiobuttons>;
+
+		button1 {
+			label = "s6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button2 {
+			label = "s7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button3 {
+			label = "s8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioled>;
+
+		led1 {
+			label = "led1";
+			gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led2 {
+			label = "led2";
+			gpios = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	reg_mba6_3p3v: regulator-mba6-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-mba6-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_regpcie>;
+		regulator-name = "supply-pcie";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		/* PCIE.PWR_EN */
+		gpio = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	reg_vcc3v3_audio: regulator-vcc3v3-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3-audio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_mba6_3p3v>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-tlv320aic32x4";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_audmux>;
+		model = "imx-audio-tlv320aic32x4";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&tlv320aic32x4>;
+		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	status = "okay";
+
+	ssi0 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT1_SSI0>;
+		fsl,port-config = <
+			(IMX_AUDMUX_V2_PTCR_SYN |
+				IMX_AUDMUX_V2_PTCR_TFSDIR |
+				IMX_AUDMUX_V2_PTCR_TFSEL(MX31_AUDMUX_PORT3_SSI_PINS_3) |
+				IMX_AUDMUX_V2_PTCR_TCLKDIR |
+				IMX_AUDMUX_V2_PTCR_TCSEL(MX31_AUDMUX_PORT3_SSI_PINS_3))
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT3_SSI_PINS_3)
+		>;
+	};
+
+	aud3 {
+		fsl,audmux-port = <MX31_AUDMUX_PORT3_SSI_PINS_3>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN
+			IMX_AUDMUX_V2_PDCR_RXDSEL(MX31_AUDMUX_PORT1_SSI0)
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>, <&pinctrl_ecspi1_mba6>;
+	cs-gpios = <&gpio3 19 0>, <&gpio3 24 0>;
+};
+
+&fec {
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	mac-address = [00 00 00 00 00 00];
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			interrupt-parent = <&gpio1>;
+			interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <1000>;
+			reset-deassert-us = <100000>;
+			micrel,force-master;
+			max-speed = <1000>;
+		};
+	};
+};
+
+&i2c1 {
+	tlv320aic32x4: audio-codec@18 {
+		compatible = "ti,tlv320aic32x4";
+		reg = <0x18>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "mclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		ldoin-supply = <&reg_vcc3v3_audio>;
+		iov-supply = <&reg_mba6_3p3v>;
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-active-low;
+	rs485-rx-during-tx;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	power-active-high;
+	over-current-active-low;
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+/* SD card slot */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_mba6_3p3v>;
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog1>;
+	/* does not work on unmodified starter kit */
+	/* fsl,ext-reset-output; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD  0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0xb099
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0xb099
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0xb099
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0xb099
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0xb0 /* CLK */
+		>;
+	};
+
+	pinctrl_ecspi1_mba6: ecspimba6grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24 0xb099 /* eCSPI1 SS2 */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* FEC phy IRQ */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28     0x00011008
+			/* FEC phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25   0x1b099
+			/* DSE = 100, 100k up, SPEED = MED */
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO       0xb0a0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC         0xb0a0
+			/* DSE = 111, pull 100k up */
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC       0xb038
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0       0xb038
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1       0xb038
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2       0xb038
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3       0xb038
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0xb038
+			/* DSE = 111, pull external */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC       0x0038
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0       0x0038
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1       0x0038
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2       0x0038
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3       0x0038
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x0038
+			/* HYS = 1, DSE = 111, 100k up, SPEED = HIGH */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK  0x1b0f0
+		>;
+	};
+
+	pinctrl_gpiobeeper: gpiobeepergrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0xb099
+		>;
+	};
+
+	pinctrl_gpiobuttons: gpiobuttongrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0001b099
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x0001b099
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b099
+		>;
+	};
+
+	pinctrl_gpioled: gpioledgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0xb099 /* LED V15 */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0xb099 /* LED V16 */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x0001b099
+
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b099
+			MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b099
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b099
+
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x0001b099
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x0001b099
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x0001b099
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x0001b099
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x0001b099
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x0001b099
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x0001b099
+
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x0001b099
+			MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x0001b099
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x0001b099
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x0001b099
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x0001b099
+
+			MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x0001b099
+			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x0001b099
+			MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x0001b099
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x0001b099
+
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x0001b099
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x0001b099
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x0001b099
+
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0001b099
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x0001b099
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, 100k up, SPEED = HIGH (11)*/
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x001b0f0 /* #PCIE.WAKE */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x001b0f0 /* #PCIE.RST */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x001b0f0 /* #PCIE.DIS */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_GPIO_9__PWM1_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			/* 100 k PD, DSE 120 OHM, SPPEED LO */
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x00003050
+		>;
+	};
+
+	pinctrl_regpcie: regpciegrp {
+		fsl,pins = <
+			/* HYS = 1, DSE = 110, PUE+PKE, SPEED = HIGH (11)*/
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x00130f0 /* PCIE.PWR_EN */
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b099
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b099
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CLK__UART3_RX_DATA 0x1b0b1
+			MX6QDL_PAD_SD4_CMD__UART3_TX_DATA 0x1b0b1
+			MX6QDL_PAD_EIM_D30__UART3_CTS_B   0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B   0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1
+			MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			/* CLK: 47k Pup SPD_LOW DSE 40Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CLK__SD2_CLK    0x00017071
+			/* SD2: 47k Pup SPD_LOW DSE 80Ohm SRE_FAST HYS */
+			MX6QDL_PAD_SD2_CMD__SD2_CMD    0x00017059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x00017059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x00017059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x00017059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x00017059
+
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x0001b099 /* usdhc2 CD */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02  0x0001b099 /* usdhc2 WP */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x0001b0b0
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID   0x00017059
+			MX6QDL_PAD_EIM_D22__USB_OTG_PWR 0x0001b099
+		>;
+	};
+
+	pinctrl_wdog1: wdog1grp {
+		fsl,pins = <
+			 /* Watchdog out */
+			MX6QDL_PAD_SD1_DAT2__WDOG1_B 0x0000b099
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
new file mode 100644
index 000000000000..df8fa169e9f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6a.dtsi
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>, <&pinctrl_enet_fix>;
+};
+
+&i2c1 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
new file mode 100644
index 000000000000..7d1cd7454c7f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-mba6b.dtsi
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ *
+ * Copyright 2013-2021 TQ-Systems GmbH
+ * Author: Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	lm75: temperature-sensor@49 {
+		compatible = "national,lm75";
+		reg = <0x49>;
+	};
+
+	m24c64_57: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+	};
+
+	rtc0: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&iomuxc {
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
deleted file mode 100644
index 469ef58ce4bc..000000000000
--- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This describes the hookup for an AR8035 to the iMX6 on the SolidRun
- * MicroSOM.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
-	phy-mode = "rgmii";
-	phy-reset-duration = <2>;
-	phy-reset-gpios = <&gpio4 15 0>;
-	status = "okay";
-};
-
-&iomuxc {
-	enet {
-		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
-				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				/* AR8035 reset */
-				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
-				/* AR8035 interrupt */
-				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x80000000
-				/* GPIO16 -> AR8035 25MHz */
-				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0xc0000000
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x80000000
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
-				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
-				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
-				/* AR8035 pin strapping: IO voltage: pull up */
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
-				/* AR8035 pin strapping: PHYADDR#0: pull down */
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
-				/* AR8035 pin strapping: PHYADDR#1: pull down */
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
-				/* AR8035 pin strapping: MODE#1: pull up */
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
-				/* AR8035 pin strapping: MODE#3: pull up */
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
-				/* AR8035 pin strapping: MODE#0: pull down */
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
-
-				/*
-				 * As the RMII pins are also connected to RGMII
-				 * so that an AR8030 can be placed, set these
-				 * to high-z with the same pulls as above.
-				 * Use the GPIO settings to avoid changing the
-				 * input select registers.
-				 */
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
-				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
-				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
-			>;
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi
deleted file mode 100644
index 6d4069cc9419..000000000000
--- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * Copyright (C) 2013,2014 Russell King
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	clk_sdio: sdio-clock {
-		compatible = "gpio-gate-clock";
-		#clock-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
-		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
-	};
-
-	regulators {
-		compatible = "simple-bus";
-
-		reg_brcm: brcm-reg {
-			compatible = "regulator-fixed";
-			enable-active-high;
-			gpio = <&gpio3 19 0>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
-			regulator-name = "brcm_reg";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			startup-delay-us = <200000>;
-		};
-	};
-
-	usdhc1_pwrseq: usdhc1_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
-			      <&gpio6 0 GPIO_ACTIVE_LOW>;
-		clocks = <&clk_sdio>;
-		clock-names = "ext_clock";
-	};
-};
-
-&iomuxc {
-	microsom {
-		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
-				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
-				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
-			fsl,pins = <
-				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
-			>;
-		};
-
-		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
-				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
-				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
-				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
-			>;
-		};
-
-		pinctrl_microsom_uart1: microsom-uart1 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_uart4: microsom-uart4 {
-			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-			>;
-		};
-
-		pinctrl_microsom_usdhc1: microsom-usdhc1 {
-			fsl,pins = <
-				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
-				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
-				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
-				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
-				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
-				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
-			>;
-		};
-	};
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_uart1>;
-	status = "okay";
-};
-
-/* UART4 - Connected to optional BRCM Wifi/BT/FM */
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
-	fsl,uart-has-rtscts;
-	status = "okay";
-};
-
-/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
-&usdhc1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
-	bus-width = <4>;
-	mmc-pwrseq = <&usdhc1_pwrseq>;
-	keep-power-in-suspend;
-	non-removable;
-	vmmc-supply = <&reg_brcm>;
-	status = "okay";
-};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
new file mode 100644
index 000000000000..6d4eab1942b9
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_2p5v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <102>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+			linux,code = <158>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-j14-pin1 {
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pin3 {
+			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j14-pins8-9 {
+			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin2 {
+			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-j46-pin3 {
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+	};
+
+	backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6dl-nit6xlite-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6dl-nit6xlite-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+
+	rtc@6f {
+		compatible = "isil,isl1208";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		reg = <0x6f>;
+		interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_j10>;
+	pinctrl-1 = <&pinctrl_j28>;
+
+	imx6dl-nit6xlite {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Home Button: J14 pin 5 */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Back Button: J14 pin 7 */
+				MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				/* Touch IRQ: J7 pin 4 */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+				/* tcs2004 IRQ */
+				MX6QDL_PAD_EIM_LBA__GPIO2_IO27	0x1b0b0
+				/* tsc2004 reset */
+				MX6QDL_PAD_KEY_COL2__GPIO4_IO10	0x0b0b0
+			>;
+		};
+
+		pinctrl_j10: j10grp {
+			fsl,pins = <
+				/* Broadcom WiFi module pins */
+				MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b0
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09	0x0b0b0
+				MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x1b0b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+
+		pinctrl_j28: j28grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+				MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x0b0b0
+				MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x030b0
+				MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x0b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT		0x1b0b1
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b0
+			>;
+		};
+
+		pinctrl_rtc: rtcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
new file mode 100644
index 000000000000..81a9a302aec1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -0,0 +1,849 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2015 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xF0000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_1p8v: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p5v: regulator@1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "2P5V";
+			regulator-min-microvolt = <2500000>;
+			regulator-max-microvolt = <2500000>;
+			regulator-always-on;
+		};
+
+		reg_3p3v: regulator@2 {
+			compatible = "regulator-fixed";
+			reg = <2>;
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_usb_otg_vbus: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "usb_otg_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+
+		reg_wlan_vmmc: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_can_xcvr: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	i2c2mux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH
+			     &gpio4 15 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c2>;
+		idle-state = <0>;
+
+		i2c2mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2mux@2 {
+			reg = <2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	i2c3mux {
+		compatible = "i2c-mux-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c3mux@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-speaker-enable {
+			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "off";
+		};
+
+		led-ttymxc4-rs232 {
+			gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
+			retain-state-suspended;
+			default-state = "on";
+		};
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_max-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_max-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	imx6q-nitrogen6-max {
+		pinctrl_audmux: audmuxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+				MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+				MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+				MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+				MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+				MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+				/* Phy reset */
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x0f0b0
+				MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+			>;
+		};
+
+		pinctrl_gpio_keys: gpio-keysgrp {
+			fsl,pins = <
+				/* Power Button */
+				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+				/* Menu Button */
+				MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+				/* Home Button */
+				MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+				/* Back Button */
+				MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+				/* Volume Up Button */
+				MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+				/* Volume Down Button */
+				MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+				MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+			>;
+		};
+
+		pinctrl_i2c2mux: i2c2muxgrp {
+			fsl,pins = <
+				/* ov5642 camera i2c enable */
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x000b0
+				/* ov5640_mipi camera i2c enable */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15	0x000b0
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+				MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+			>;
+		};
+
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				/* PCIe I2C enable */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_pcie: pciegrp {
+			fsl,pins = <
+				/* PCIe reset */
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31	0x000b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm2: pwm2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__PWM2_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm3: pwm3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_pwm4: pwm4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x1b0b1
+			>;
+		};
+
+		pinctrl_rv4162: rv4162grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__GPIO4_IO06	0x1b0b0
+			>;
+		};
+
+		pinctrl_sgtl5000: sgtl5000grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+				MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__GPIO1_IO29	0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_uart5: uart5grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x130b1
+				MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x030b1
+				/* RS485 RX Enable: pull up */
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x1b0b1
+				/* RS485 DEN: pull down */
+				MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x030b1
+				/* RS485/!RS232 Select: pull down (rs232) */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x030b1
+				/* ON: pull down */
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x030b1
+			>;
+		};
+
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x0b0b0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x000b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+				MX6QDL_PAD_NANDF_CS1__SD3_VSELECT	0x100b0
+				MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+				MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+				MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+				MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+				MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+				MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+				MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+				MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+				MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+			>;
+		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
new file mode 100644
index 000000000000..000e9dc97b1a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -0,0 +1,736 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
+/*
+ * Copyright 2016 Boundary Devices, Inc.
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds0: backlight-lvds0 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_3p3v>;
+		status = "okay";
+	};
+
+	backlight_lvds1: backlight-lvds1 {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight_lvds1>;
+		gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		menu {
+			label = "Menu";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_MENU>;
+		};
+
+		home {
+			label = "Home";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds0>;
+
+		port {
+			panel_in_lvds0: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel-lvds1 {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds1>;
+
+		port {
+			panel_in_lvds1: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+	};
+
+	reg_1p8v: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_2p5v: regulator-2v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can_xcvr: regulator-can-xcvr {
+		compatible = "regulator-fixed";
+		regulator-name = "CAN XCVR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can_xcvr>;
+		gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator-wlan-vmmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_vmmc>;
+		regulator-name = "reg_wlan_vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "fsl,imx6q-nitrogen6_som2-sgtl5000",
+			     "fsl,imx-audio-sgtl5000";
+		model = "imx6q-nitrogen6_som2-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: flash@0 {
+		compatible = "microchip,sst25vf016b";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	codec: sgtl5000@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+
+	rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rv4162>;
+		reg = <0x68>;
+		interrupts-extended = <&gpio6 7 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight_lvds1: backlight-lvds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x0b0b0
+		>;
+	};
+
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_can_xcvr: can-xcvrgrp {
+		fsl,pins = <
+			/* Flexcan XCVR enable */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x0b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x130b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x130b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x130b0
+			MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x030b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b0
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_gpio_keys: gpio-keysgrp {
+		fsl,pins = <
+			/* Power Button */
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
+			/* Menu Button */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01		0x1b0b0
+			/* Home Button */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04		0x1b0b0
+			/* Back Button */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02		0x1b0b0
+			/* Volume Up Button */
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13		0x1b0b0
+			/* Volume Down Button */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL	0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_16__I2C3_SDA	0x4001b8b1
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3mux: i2c3muxgrp {
+		fsl,pins = <
+			/* PCIe I2C enable */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25	0x000b0
+		>;
+	};
+
+	pinctrl_j15: j15grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			/* PCIe reset */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00	0x030b0
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04	0x030b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__PWM4_OUT	0x030b1
+		>;
+	};
+
+	pinctrl_rv4162: rv4162grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x000b0
+			MX6QDL_PAD_EIM_D29__GPIO3_IO29		0x130b0
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x130b0
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24	0x130b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1: usbh1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+			MX6QDL_PAD_KEY_COL4__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x030b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10071
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17071
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17071
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17071
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17071
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17071
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_wlan_vmmc: wlan-vmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x100b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x030b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x030b0
+			MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+		>;
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in_lvds0>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <18>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&panel_in_lvds1>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_3p3v>;
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&reg_1p8v>;
+	keep-power-in-suspend;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 3af16dfe417b..731759bdd7f5 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -1,14 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2013 Boundary Devices, Inc.
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -18,7 +12,8 @@
 		stdout-path = &uart2;
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
@@ -54,6 +49,42 @@
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
 		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_wlan_vmmc: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_wlan_vmmc>;
+			regulator-name = "reg_wlan_vmmc";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>;
+			startup-delay-us = <70000>;
+			enable-active-high;
+		};
+
+		reg_usb_h1_vbus: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
 	};
 
 	gpio-keys {
@@ -65,7 +96,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
@@ -113,7 +144,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -122,7 +153,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds: backlight_lvds {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -131,7 +162,44 @@
 		status = "okay";
 	};
 
-	panel {
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
 
@@ -149,17 +217,47 @@
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "bootloader";
+			reg = <0x0 0xc0000>;
+		};
+
+		partition@c0000 {
+			label = "env";
+			reg = <0xc0000 0x2000>;
+		};
+
+		partition@c2000 {
+			label = "splash";
+			reg = <0xc2000 0x13e000>;
+		};
 	};
 };
 
@@ -167,22 +265,34 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 27 0>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
+	phy-handle = <&ethphy>;
+	phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
@@ -196,10 +306,10 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -222,6 +332,22 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+	};
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		wakeup-source;
+	};
 };
 
 &iomuxc {
@@ -233,6 +359,7 @@
 			fsl,pins = <
 				/* SGTL5000 sys_mclk */
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x030b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0
 			>;
 		};
 
@@ -245,6 +372,20 @@
 			>;
 		};
 
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
@@ -258,26 +399,26 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x000b0
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
@@ -315,6 +456,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -347,6 +521,12 @@
 			>;
 		};
 
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID	0x17059
@@ -356,6 +536,17 @@
 			>;
 		};
 
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17071
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10071
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17071
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17071
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17071
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17071
+			>;
+		};
+
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
@@ -379,15 +570,26 @@
 				MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0	/* CD */
 			>;
 		};
+
+		pinctrl_wlan_vmmc: wlan-vmmcgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x100b0
+				MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x000b0
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x000b0
+				MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT	0x000b0
+			>;
+		};
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";
 
 	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
 		status = "okay";
 
 		port@4 {
@@ -405,6 +607,7 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
@@ -417,6 +620,7 @@
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -439,6 +643,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
@@ -450,10 +655,31 @@
 	status = "okay";
 };
 
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	non-removable;
+	vmmc-supply = <&reg_wlan_vmmc>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1271";
+		reg = <2>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = <38400000>;
+	};
+};
+
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -461,7 +687,7 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
new file mode 100644
index 000000000000..0020dbb1722c
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-av-02.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+/ {
+	display: display0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0>;
+		interface-pix-fmt = "rgb24";
+		status = "disabled";
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&peb_panel_lcd_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "edt,etm0700g0edh6";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_disp0_pwr>;
+		power-supply = <&reg_display>;
+		enable-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			peb_panel_lcd_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+
+	reg_display: regulator-peb-display {
+		compatible = "regulator-fixed";
+		regulator-name = "peb-display";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c1 {
+	edt_ft5x06: touchscreen@38 {
+		compatible = "edt,edt-ft5406";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_edt_ft5x06>;
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <2 IRQ_TYPE_NONE>;
+		status = "disabled";
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_disp0: disp0grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x1b080
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_disp0_pwr: disp0pwrgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22			0x1b0b0
+		>;
+	};
+
+	pinctrl_edt_ft5x06: edtft5x06grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02			0xb0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
new file mode 100644
index 000000000000..037b60197598
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+		status = "disabled";
+
+		power {
+			label = "Power Button";
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WAKEUP>;
+			wakeup-source;
+		};
+
+		sleep {
+			label = "Sleep Button";
+			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_SLEEP>;
+		};
+	};
+
+	user_leds: user-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_user_leds>;
+		status = "disabled";
+
+		user-led1 {
+			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led2 {
+			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+
+		user-led3 {
+			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "gpio";
+			default-state = "on";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT6__GPIO6_IO18		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_user_leds: userledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b0b0
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0x1b0b0
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
new file mode 100644
index 000000000000..84f884d6e55b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira-peb-wlbt-05.dtsi
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2021 PHYTEC Messtechnik GmbH
+ * Author: Yunus Bas <y.bas@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_wl_en: regulator-wl-en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wl>;
+		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+		status = "disabled";
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3_bt>;
+	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio5 26 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+};
+
+&usdhc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3_wl>;
+	vmmc-supply = <&reg_wl_en>;
+	bus-width = <4>;
+	non-removable;
+	no-1-8-v;
+	status = "disabled";
+
+	brmcf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl_uart3_bt: uart3grp-bt {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_EB3__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00		0xb0b1	/* BT ENABLE */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0xb0b1	/* DEV WAKEUP */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0xb0b1  /* HOST WAKEUP */
+		>;
+	};
+
+	pinctrl_usdhc3_wl: usdhc3grp-wl {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_wl: wlgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02      0xb0b1	/* WLAN ENABLE */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
new file mode 100644
index 000000000000..1a599c294ab8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+
+/ {
+	aliases {
+		rtc0 = &i2c_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		status = "okay";
+	};
+
+	gpio_leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+		status = "disabled";
+
+		led-red {
+			label = "phyboard-mira:red";
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-green {
+			label = "phyboard-mira:green";
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-blue {
+			label = "phyboard-mira:blue";
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	reg_backlight: regulator-backlight {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_en_switch: regulator-en-switch {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_en_switch>;
+		regulator-name = "Enable Switch";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	reg_flexcan1: regulator-flexcan1 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flexcan1_en>;
+		regulator-name = "flexcan1-reg";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_panel: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-always-on;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "mPCIe_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpio3 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_h1_vbus: usb-h1-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbh1_vbus>;
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usbotg_vbus: usbotg-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	panel {
+		compatible = "auo,g104sn02";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_panel_en>;
+		power-supply = <&reg_panel>;
+		enable-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+		backlight = <&backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_flexcan1>;
+	status = "disabled";
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmicec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "disabled";
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <400000>;
+	status = "disabled";
+
+	stmpe: touchctrl@44 {
+		compatible = "st,stmpe811";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_stmpe>;
+		reg = <0x44>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <12 IRQ_TYPE_NONE>;
+		status = "disabled";
+
+		stmpe_touchscreen {
+			compatible = "st,stmpe-ts";
+			st,sample-time = <4>;
+			st,mod-12b = <1>;
+			st,ref-sel = <0>;
+			st,adc-freq = <1>;
+			st,ave-ctrl = <1>;
+			st,touch-det-delay = <2>;
+			st,settling = <2>;
+			st,fraction-z = <7>;
+			st,i-drive = <1>;
+		};
+	};
+
+	i2c_rtc: rtc@68 {
+		compatible = "microcrystal,rv4162";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc_int>;
+		reg = <0x68>;
+		interrupt-parent = <&gpio7>;
+		interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "disabled";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		fsl,data-mapping = "spwg";
+		fsl,data-width = <24>;
+		status = "disabled";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie>;
+	reset-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
+	status = "disabled";
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "disabled";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	vbus-supply = <&reg_usbotg_vbus>;
+	disable-over-current;
+	status = "disabled";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	disable-wp;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_panel_en: panelen1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+		>;
+	};
+
+	pinctrl_en_switch: enswitchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0xb0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX		0x1b0b0
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX		0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan1_en: flexcan1engrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0xb0b1
+		>;
+	};
+
+	pinctrl_gpioleds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT6__GPIO5_IO24	0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmicec: hdmicecgrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0xb0b1
+		>;
+	};
+
+	pinctrl_pcie_reg: pciereggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0xb0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_rtc_int: rtcintgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_stmpe: stmpegrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB3__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_RTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbh1_vbus: usbh1vbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0xb0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0xb0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1  /* CD */
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index 585b4f6986c1..51d28e275aa6 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -1,19 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/sound/fsl-imx-audmux.h>
 
 / {
 	chosen {
-		linux,stdout-path = &uart4;
+		stdout-path = &uart4;
 	};
 
 	regulators {
@@ -84,7 +78,8 @@
 	ssi2 {
 		fsl,audmux-port = <1>;
 		fsl,port-config = <
-			(IMX_AUDMUX_V2_PTCR_TFSDIR |
+			(IMX_AUDMUX_V2_PTCR_SYN |
+			IMX_AUDMUX_V2_PTCR_TFSDIR |
 			IMX_AUDMUX_V2_PTCR_TFSEL(4) |
 			IMX_AUDMUX_V2_PTCR_TCLKDIR |
 			IMX_AUDMUX_V2_PTCR_TCSEL(4))
@@ -95,7 +90,7 @@
 	pins5 {
 		fsl,audmux-port = <4>;
 		fsl,port-config = <
-			0x00000000
+			IMX_AUDMUX_V2_PTCR_SYN
 			IMX_AUDMUX_V2_PDCR_RXDSEL(1)
 		>;
 	};
@@ -134,7 +129,7 @@
 	};
 
 	rtc@51 {
-		compatible = "nxp,rtc8564";
+		compatible = "epson,rtc8564";
 		reg = <0x51>;
 	};
 
@@ -170,6 +165,7 @@
 
 &usbotg {
 	status = "okay";
+	dr_mode = "peripheral";
 };
 
 &usdhc2 {
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 1ce6133b67f5..80adb2a02cc9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -1,21 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include <dt-bindings/gpio/gpio.h>
 
 / {
-	model = "Phytec phyFLEX-i.MX6 Ouad";
+	model = "Phytec phyFLEX-i.MX6 Quad";
 	compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 
@@ -36,6 +31,8 @@
 
 		reg_usb_h1_vbus: regulator@1 {
 			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1_vbus>;
 			reg = <1>;
 			regulator-name = "usb_h1_vbus";
 			regulator-min-microvolt = <5000000>;
@@ -46,14 +43,16 @@
 	};
 
 	gpio_leds: leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
 		compatible = "gpio-leds";
 
-		green {
+		led_green: led-green {
 			label = "phyflex:green";
 			gpios = <&gpio1 30 0>;
 		};
 
-		red {
+		led_red: led-red {
 			label = "phyflex:red";
 			gpios = <&gpio2 31 0>;
 		};
@@ -76,11 +75,10 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
 	status = "okay";
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 24 0>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
 
-	flash@0 {
-		compatible = "m25p80";
+	som_flash: flash@0 {
+		compatible = "m25p80", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -89,10 +87,24 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
 	phy-mode = "rgmii";
+	phy-reset-duration = <10>; /* in msecs */
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 	phy-supply = <&vdd_eth_io_reg>;
 	status = "disabled";
+
+	fec_mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
 };
 
 &gpmi {
@@ -107,16 +119,20 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	eeprom@50 {
-		compatible = "atmel,24c32";
+	som_eeprom: eeprom@50 {
+		compatible = "catalyst,24c32", "atmel,24c32";
+		pagesize = <32>;
 		reg = <0x50>;
 	};
 
 	pmic@58 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
 		compatible = "dlg,da9063";
 		reg = <0x58>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <9 0x8>; /* active-low GPIO2_9 */
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+		interrupt-controller;
 
 		regulators {
 			vddcore_reg: bcore1 {
@@ -189,6 +205,19 @@
 				regulator-always-on;
 			};
 		};
+
+		da9063_rtc: rtc {
+			compatible = "dlg,da9063-rtc";
+		};
+
+		da9063_wdog: watchdog {
+			compatible = "dlg,da9063-watchdog";
+		};
+
+		onkey {
+			compatible = "dlg,da9063-onkey";
+			status = "disabled";
+		};
 	};
 };
 
@@ -205,25 +234,13 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
 	imx6q-phytec-pfla02 {
-		pinctrl_hog: hoggrp {
-			fsl,pins = <
-				MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
-				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
-				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09  0x80000000 /* PMIC interrupt */
-				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
-				MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
-			>;
-		};
-
 		pinctrl_ecspi3: ecspi3grp {
 			fsl,pins = <
 				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
 				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
 				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x80000000 /* CS0 */
 			>;
 		};
 
@@ -231,20 +248,21 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x80000000 /* Reset GPIO */
 			>;
 		};
 
@@ -298,16 +316,27 @@
 			>;
 		};
 
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000 /* Green LED */
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x80000000 /* Red LED */
+			>;
+		};
+
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17  0x80000000>;
 		};
 
+		pinctrl_pmic: pmicgrp {
+			fsl,pins = <MX6QDL_PAD_SD4_DAT1__GPIO2_IO09	0x80000000>; /* PMIC interrupt */
+		};
+
 		pinctrl_uart3: uart3grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b0b1
-				MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x1b0b1
 			>;
 		};
 
@@ -318,9 +347,9 @@
 			>;
 		};
 
-		pinctrl_usbh1: usbh1grp {
+		pinctrl_usbh1_vbus: usbh1vbusgrp {
 			fsl,pins = <
-				MX6QDL_PAD_GPIO_0__USB_H1_PWR		0x80000000
+				MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
 			>;
 		};
 
@@ -373,15 +402,28 @@
 };
 
 &pcie {
-	pinctrl-name = "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio4 17 0>;
+	reset-gpio = <&gpio4 17 GPIO_ACTIVE_LOW>;
 	status = "disabled";
 };
 
+&reg_arm {
+	vin-supply = <&vddcore_reg>;
+};
+
+&reg_pu {
+	vin-supply = <&vddsoc_reg>;
+};
+
+&reg_soc {
+	vin-supply = <&vddsoc_reg>;
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
 	status = "disabled";
 };
 
@@ -393,8 +435,6 @@
 
 &usbh1 {
 	vbus-supply = <&reg_usb_h1_vbus>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbh1>;
 	status = "disabled";
 };
 
@@ -409,16 +449,18 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
+	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
 &usdhc3 {
-        pinctrl-names = "default";
-        pinctrl-0 = <&pinctrl_usdhc3
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3
 		     &pinctrl_usdhc3_cdwp>;
-        cd-gpios = <&gpio1 27 0>;
-        wp-gpios = <&gpio1 29 0>;
-        status = "disabled";
+	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
+	status = "disabled";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
new file mode 100644
index 000000000000..28a805384668
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Christian Hemp <c.hemp@phytec.de>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/dlg,da9063-regulator.h>
+
+/ {
+	aliases {
+		rtc1 = &da9062_rtc;
+		rtc2 = &snvs_rtc;
+	};
+
+	/*
+	 * Set the minimum memory size here and
+	 * let the bootloader set the real size.
+	 */
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x8000000>;
+	};
+
+	gpio_leds_som: somleds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds_som>;
+
+		som-led-green {
+			label = "phycore:green";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		status = "disabled";
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-handle = <&ethphy>;
+	phy-mode = "rgmii";
+	phy-supply = <&vdd_eth_io>;
+	phy-reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 {
+			reg = <3>;
+			txc-skew-ps = <1680>;
+			rxc-skew-ps = <1860>;
+		};
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	status = "disabled";
+};
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "st,24c32", "atmel,24c32";
+		pagesize = <32>;
+		reg = <0x50>;
+	};
+
+	pmic: pmic@58 {
+		compatible = "dlg,da9062";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+		reg = <0x58>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		da9062_rtc: rtc {
+			compatible = "dlg,da9062-rtc";
+		};
+
+		da9062_onkey: onkey {
+			compatible = "dlg,da9062-onkey";
+		};
+
+		watchdog {
+			compatible = "dlg,da9062-watchdog";
+			dlg,use-sw-pm;
+		};
+
+		thermal {
+			compatible = "dlg,da9062-thermal";
+			status = "disabled";
+		};
+
+		gpio {
+			compatible = "dlg,da9062-gpio";
+			status = "disabled";
+		};
+
+		regulators {
+			vdd_arm: buck1 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <925000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_soc: buck2 {
+				regulator-name = "vdd_soc";
+				regulator-min-microvolt = <1150000>;
+				regulator-max-microvolt = <1380000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_ddr3_1p5: buck3 {
+				regulator-name = "vdd_ddr3";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_eth_1p2: buck4 {
+				regulator-name = "vdd_eth";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>;
+				regulator-always-on;
+			};
+
+			vdd_snvs: ldo1 {
+				regulator-name = "vdd_snvs";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_high: ldo2 {
+				regulator-name = "vdd_high";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-always-on;
+			};
+
+			vdd_eth_io: ldo3 {
+				regulator-name = "vdd_eth_io";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+			};
+
+			vdd_emmc_1p8: ldo4 {
+				regulator-name = "vdd_emmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+		};
+	};
+};
+
+&reg_arm {
+	vin-supply = <&vdd_arm>;
+};
+
+&reg_pu {
+	vin-supply = <&vdd_soc>;
+};
+
+&reg_soc {
+	vin-supply = <&vdd_soc>;
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&usdhc4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc4>;
+	bus-width = <8>;
+	non-removable;
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpioleds_som: gpioledssomgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b0
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE		0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE		0xb0b1
+			MX6QDL_PAD_NANDF_WP_B__NAND_WP_B	0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B	0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS2__NAND_CE2_B	0xb0b1
+			MX6QDL_PAD_NANDF_CS3__NAND_CE3_B	0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B		0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B		0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00	0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01	0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02	0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03	0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04	0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05	0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06	0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07	0xb0b1
+			MX6QDL_PAD_SD4_DAT0__NAND_DQS		0x00b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06	0x4001b8b1
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05	0x4001b8b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x1b0b0
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc4: usdhc4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
new file mode 100644
index 000000000000..3a968782e854
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-dwarf.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	mpl3115@60 {
+		compatible = "fsl,mpl3115";
+		reg = <0x60>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
new file mode 100644
index 000000000000..144c4727fbc7
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-hobbit.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c2 {
+	status = "okay";
+
+	adc081c: adc@50 {
+		compatible = "ti,adc081c";
+		reg = <0x50>;
+		vref-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
new file mode 100644
index 000000000000..3d56a4216448
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-nymph.dtsi
@@ -0,0 +1,54 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&i2c1 {
+	adc@52 {
+		compatible = "ti,adc081c";
+		reg = <0x52>;
+		vref-supply = <&reg_2p5v>;
+	};
+};
+
+&i2c2 {
+	io-expander@25 {
+		compatible = "nxp,pca9554";
+		reg = <0x25>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+	};
+};
+
+&i2c3 {
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
new file mode 100644
index 000000000000..b823dce62e63
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico-pi.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+//
+// Copyright 2017 NXP
+
+#include "imx6qdl-pico.dtsi"
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led {
+			label = "gpio-led";
+			gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+};
+
+&hdmi {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_gpio_leds: gpioledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-pico.dtsi b/arch/arm/boot/dts/imx6qdl-pico.dtsi
new file mode 100644
index 000000000000..c39a9ebdaba1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-pico.dtsi
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+//
+// Copyright 2018 Technexion Ltd.
+//
+// Author: Wig Cheng <wig.cheng@technexion.com>
+//	   Richard Hu <richard.hu@technexion.com>
+//	   Tapani Utriainen <tapani@technexion.com>
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	reg_2p5v: regulator-2p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P5V";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbotg_vbus>;
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	};
+
+	codec_osc: clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24576000>;
+	};
+
+	sound {
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "imx6-pico-sgtl5000";
+		ssi-controller = <&ssi1>;
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		mux-int-port = <1>;
+		mux-ext-port = <3>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm4 0 50000 0>;
+		brightness-levels = <0 36 72 108 144 180 216 255>;
+		default-brightness-level = <6>;
+		status = "okay";
+	};
+
+	reg_lcd_3v3: regulator-lcd-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_lcd>;
+		regulator-name = "lcd-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "vxt,vl050-8048nt-c01";
+		backlight = <&backlight>;
+		power-supply = <&reg_lcd_3v3>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	sgtl5000: audio-codec@a {
+		#sound-dai-cells = <0>;
+		reg = <0x0a>;
+		compatible = "fsl,sgtl5000";
+		clocks = <&codec_osc>;
+		VDDA-supply = <&reg_2p5v>;
+		VDDIO-supply = <&reg_1p8v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <800>;
+		touchscreen-size-y = <480>;
+		wakeup-source;
+	};
+
+	camera@3c {
+		compatible = "ovti,ov5645";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5645>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-frequency = <24000000>;
+		vdddo-supply = <&reg_1p8v>;
+		vdda-supply = <&reg_2p8v>;
+		vddd-supply = <&reg_1p5v>;
+		enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5645_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5645_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcie_reset>;
+	reset-gpio = <&gpio5 21 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm4>;
+	status = "okay";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {  /* Bluetooth module */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {  /* Wifi/BT  */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <4>;
+	no-1-8-v;
+	keep-power-in-suspend;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	no-1-8-v;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x4001b0b5 /* PICO_P24 */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x4001b0b5 /* PICO_P26 */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x4001b0b5 /* PICO_P28 */
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x4001b0b5 /* PICO_P30 */
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x4001b0b5 /* PICO_P32 */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x4001b0b5 /* PICO_P34 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x4001b0b5 /* PICO_P42 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x4001b0b5 /* PICO_P44 */
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x4001b0b5 /* PICO_P48 */
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x000f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x1b0b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x1b0b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x1b0b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000f0b0
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x000f0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1f0b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b0
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D18__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+
+	pinctrl_ov5645: ov5645grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x0b0b0
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x0b0b0
+			MX6QDL_PAD_GPIO_3__CCM_CLKO2		0x000b0
+		>;
+	};
+
+	pinctrl_pcie_reset: pciegrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x130b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT2__PWM4_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_reg_lcd: reglcdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D23__UART3_CTS_B		0x1b0b1
+			MX6QDL_PAD_EIM_D31__UART3_RTS_B		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x17059
+		>;
+	};
+
+	pinctrl_usbotg_vbus: usbotgvbusgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17071
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x17071
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17071
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17071
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17071
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17071
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-prti6q.dtsi b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
new file mode 100644
index 000000000000..f0db0d4471f4
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-prti6q.dtsi
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b008
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b008
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index 488a640796ac..f804ff95a6ad 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2014 FEDEVEL, Inc.
  *
  * Author: Robert Nelson <robertcnelson@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  */
 
 #include <dt-bindings/gpio/gpio.h>
@@ -35,7 +31,6 @@
 			compatible = "regulator-fixed";
 			reg = <1>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbh1>;
 			regulator-name = "usbh1_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -47,7 +42,6 @@
 			compatible = "regulator-fixed";
 			reg = <2>;
 			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_usbotg>;
 			regulator-name = "usb_otg_vbus";
 			regulator-min-microvolt = <5000000>;
 			regulator-max-microvolt = <5000000>;
@@ -61,7 +55,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		led0: usr {
+		led0: led-usr {
 			label = "usr";
 			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
 			default-state = "off";
@@ -91,7 +85,6 @@
 };
 
 &ecspi2 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi2>;
@@ -99,7 +92,6 @@
 };
 
 &ecspi3 {
-	fsl,spi-num-chipselects = <1>;
 	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
@@ -125,10 +117,10 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -140,8 +132,21 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	pca9535: gpio-expander@27 {
+		compatible = "nxp,pca9535";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9535>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
 	eeprom@57 {
-		compatible = "at,24c02";
+		compatible = "atmel,24c02";
 		reg = <0x57>;
 	};
 };
@@ -198,19 +203,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 				/* Phy reset */
 				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x000b0
@@ -245,6 +250,12 @@
 			>;
 		};
 
+		pinctrl_pca9535: pca9535grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x17059
+		   >;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
@@ -342,7 +353,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -351,6 +362,6 @@
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <4>;
 	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
-	wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index 3b24b12651b2..f79caa36f3d2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -1,19 +1,18 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
-	memory {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x80000000>;
 	};
 
@@ -22,12 +21,128 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		user {
+		led-user {
 			label = "debug";
 			gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
 		};
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		home {
+			label = "Home";
+			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_HOME>;
+			wakeup-source;
+		};
+
+		back {
+			label = "Back";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_BACK>;
+			wakeup-source;
+		};
+
+		program {
+			label = "Program";
+			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROGRAM>;
+			wakeup-source;
+		};
+
+		volume-up {
+			label = "Volume Up";
+			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+		};
+
+		volume-down {
+			label = "Volume Down";
+			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			wakeup-source;
+		};
+	};
+
+	clocks {
+		codec_osc: anaclk2 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <24576000>;
+		};
+	};
+
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "cs42888_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_b 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&max7310_c 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_en: regulator-can-en {
+		compatible = "regulator-fixed";
+		regulator-name = "can-en";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can_stby: regulator-can-stby {
+		compatible = "regulator-fixed";
+		regulator-name = "can-stby";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&max7310_b 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_can_en>;
+	};
+
+	sound-cs42888 {
+		compatible = "fsl,imx6-sabreauto-cs42888",
+			"fsl,imx-audio-cs42888";
+		model = "imx-cs42888";
+		audio-cpu = <&esai>;
+		audio-asrc = <&asrc>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Line Out Jack", "AOUT1L",
+			"Line Out Jack", "AOUT1R",
+			"Line Out Jack", "AOUT2L",
+			"Line Out Jack", "AOUT2R",
+			"Line Out Jack", "AOUT3L",
+			"Line Out Jack", "AOUT3R",
+			"Line Out Jack", "AOUT4L",
+			"Line Out Jack", "AOUT4R",
+			"AIN1L", "Line In Jack",
+			"AIN1R", "Line In Jack",
+			"AIN2L", "Line In Jack",
+			"AIN2R", "Line In Jack";
+	};
+
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif",
 			   "fsl,imx-sabreauto-spdif";
@@ -43,30 +158,162 @@
 		default-brightness-level = <7>;
 		status = "okay";
 	};
+
+	i2cmux {
+		compatible = "i2c-mux-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3mux>;
+		mux-gpios = <&gpio5 4 0>;
+		i2c-parent = <&i2c3>;
+		idle-state = <0>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			adv7180: camera@21 {
+				compatible = "adi,adv7180";
+				reg = <0x21>;
+				powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>;
+				interrupt-parent = <&gpio1>;
+				interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+
+				port {
+					adv7180_to_ipu1_csi0_mux: endpoint {
+						remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+						bus-width = <8>;
+					};
+				};
+			};
+
+			max7310_a: gpio@30 {
+				compatible = "maxim,max7310";
+				reg = <0x30>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			max7310_b: gpio@32 {
+				compatible = "maxim,max7310";
+				reg = <0x32>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_max7310>;
+				reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+			};
+
+			max7310_c: gpio@34 {
+				compatible = "maxim,max7310";
+				reg = <0x34>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			light-sensor@44 {
+				compatible = "isil,isl29023";
+				reg = <0x44>;
+				interrupt-parent = <&gpio5>;
+				interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+			};
+
+			magnetometer@e {
+				compatible = "fsl,mag3110";
+				reg = <0x0e>;
+				interrupt-parent = <&gpio2>;
+				interrupts = <29 IRQ_TYPE_EDGE_RISING>;
+			};
+
+			accelerometer@1c {
+				compatible = "fsl,mma8451";
+				reg = <0x1c>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_mma8451_int>;
+				interrupt-parent = <&gpio6>;
+				interrupts = <31 IRQ_TYPE_LEVEL_LOW>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&adv7180_to_ipu1_csi0_mux>;
+	bus-width = <8>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+			  <&clks IMX6QDL_PLL4_BYPASS>,
+			  <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+			  <&clks IMX6QDL_CLK_PLL4_POST_DIV>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_LVDS2_IN>,
+				 <&clks IMX6QDL_PLL4_BYPASS_SRC>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <24576000>;
 };
 
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
 	status = "disabled"; /* pin conflict with WEIM NOR */
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
 };
 
+&esai {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_esai>;
+	assigned-clocks = <&clks IMX6QDL_CLK_ESAI_SEL>,
+			  <&clks IMX6QDL_CLK_ESAI_EXTAL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>;
+	assigned-clock-rates = <0>, <24576000>;
+	status = "okay";
+};
+
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
+	/delete-property/ interrupts;
 	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
 			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	fsl,magic-packet;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can_stby>;
+	status = "disabled"; /* pin conflict with fec */
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can_stby>;
 	status = "okay";
 };
 
@@ -76,13 +323,20 @@
 	status = "okay";
 };
 
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <100000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@08 {
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -180,33 +434,33 @@
 			};
 		};
 	};
+
+	codec: cs42888@48 {
+		compatible = "cirrus,cs42888";
+		reg = <0x48>;
+		clocks = <&codec_osc>;
+		clock-names = "mclk";
+		VA-supply = <&reg_audio>;
+		VD-supply = <&reg_audio>;
+		VLS-supply = <&reg_audio>;
+		VLC-supply = <&reg_audio>;
+	};
+
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_egalax_int>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &i2c3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
-
-	max7310_a: gpio@30 {
-		compatible = "maxim,max7310";
-		reg = <0x30>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	max7310_b: gpio@32 {
-		compatible = "maxim,max7310";
-		reg = <0x32>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
-
-	max7310_c: gpio@34 {
-		compatible = "maxim,max7310";
-		reg = <0x34>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
 };
 
 &iomuxc {
@@ -236,27 +490,72 @@
 			>;
 		};
 
+		pinctrl_egalax_int: egalax-intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0xb0b1
+			>;
+		};
+
 		pinctrl_enet: enetgrp {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL1__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_KEY_COL2__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
+		pinctrl_esai: esaigrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030
+				MX6QDL_PAD_ENET_RXD1__ESAI_TX_FS    0x1b030
+				MX6QDL_PAD_ENET_TX_EN__ESAI_TX3_RX2 0x1b030
+				MX6QDL_PAD_GPIO_5__ESAI_TX2_RX3     0x1b030
+				MX6QDL_PAD_ENET_TXD0__ESAI_TX4_RX1  0x1b030
+				MX6QDL_PAD_ENET_MDC__ESAI_TX5_RX0   0x1b030
+				MX6QDL_PAD_GPIO_17__ESAI_TX0        0x1b030
+				MX6QDL_PAD_NANDF_CS3__ESAI_TX1      0x1b030
+				MX6QDL_PAD_ENET_MDIO__ESAI_RX_CLK   0x1b030
+				MX6QDL_PAD_GPIO_9__ESAI_RX_FS       0x1b030
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x17059
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x17059
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x17059
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x17059
+			>;
+		};
+
+		pinctrl_gpio_keys: gpiokeysgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__GPIO1_IO11		0x1b0b0
+				MX6QDL_PAD_SD2_DAT3__GPIO1_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+				MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b0
+				MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0
+			>;
+		};
+
 		pinctrl_gpio_leds: gpioledsgrp {
 			fsl,pins = <
 				MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x80000000
@@ -285,6 +584,12 @@
 			>;
 		};
 
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
 		pinctrl_i2c2: i2c2grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_EB2__I2C2_SCL	0x4001b8b1
@@ -299,12 +604,58 @@
 			>;
 		};
 
+		pinctrl_i2c3mux: i2c3muxgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x0b0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18  0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19  0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC    0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC   0x1b0b0
+			>;
+		};
+
+		pinctrl_max7310: max7310grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0
+			>;
+		};
+
+		pinctrl_mma8451_int: mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0xb0b1
+			>;
+		};
+
 		pinctrl_pwm3: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD4_DAT1__PWM3_OUT		0x1b0b1
 			>;
 		};
 
+		pinctrl_gpt_input_capture0: gptinputcapture0grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPT_CAPTURE1	0x1b0b0
+			>;
+		};
+
+		pinctrl_gpt_input_capture1: gptinputcapture1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT1__GPT_CAPTURE2	0x1b0b0
+			>;
+		};
+
 		pinctrl_spdif: spdifgrp {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL3__SPDIF_IN 0x1b0b0
@@ -318,6 +669,12 @@
 			>;
 		};
 
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+			>;
+		};
+
 		pinctrl_usdhc3: usdhc3grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
@@ -445,11 +802,16 @@
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
+&pcie {
+	status = "okay";
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spdif>;
@@ -462,21 +824,31 @@
 	status = "okay";
 };
 
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	status = "okay";
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	cd-gpios = <&gpio6 15 0>;
-	wp-gpios = <&gpio1 13 0>;
+	cd-gpios = <&gpio6 15 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
 &weim {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
-	#address-cells = <2>;
-	#size-cells = <1>;
 	ranges = <0 0 0x08000000 0x08000000>;
 	status = "disabled"; /* pin conflict with SPI NOR */
 
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index e00c44f6a0df..12573e1f917c 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -1,14 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0 OR X11
 /*
  * Copyright 2011 Freescale Semiconductor, Inc.
  * Copyright 2011 Linaro Ltd.
  *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
+
+#include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
@@ -17,7 +14,13 @@
 		stdout-path = &uart2;
 	};
 
-	memory {
+	aliases {
+		mmc0 = &usdhc3;
+		mmc1 = &usdhc4;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
@@ -53,6 +56,65 @@
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
 		};
+
+		reg_can_xcvr: regulator@3 {
+			compatible = "regulator-fixed";
+			reg = <3>;
+			regulator-name = "CAN XCVR";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_can_xcvr>;
+			gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_1p5v: regulator@4 {
+			compatible = "regulator-fixed";
+			reg = <4>;
+			regulator-name = "1P5V";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-always-on;
+		};
+
+		reg_1p8v: regulator@5 {
+			compatible = "regulator-fixed";
+			reg = <5>;
+			regulator-name = "1P8V";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		reg_2p8v: regulator@6 {
+			compatible = "regulator-fixed";
+			reg = <6>;
+			regulator-name = "2P8V";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-always-on;
+		};
+
+		reg_usb_h1_vbus: regulator@7 {
+			compatible = "regulator-fixed";
+			reg = <7>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_usbh1>;
+			regulator-name = "usb_h1_vbus";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+
+	mipi_xclk: mipi_xclk {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <22000000>;
+		clock-output-names = "mipi_pwm3";
+		pwms = <&pwm3 0 45>; /* 1 / 45 ns = 22 MHz */
+		status = "okay";
 	};
 
 	gpio-keys {
@@ -64,7 +126,7 @@
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
-			gpio-key,wakeup;
+			wakeup-source;
 		};
 
 		menu {
@@ -112,7 +174,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight-lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -121,7 +183,7 @@
 		status = "okay";
 	};
 
-	backlight_lvds: backlight_lvds {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm4 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -130,7 +192,44 @@
 		status = "okay";
 	};
 
-	panel {
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel-lcd {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	panel-lvds0 {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;
 
@@ -142,21 +241,50 @@
 	};
 };
 
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
 &audmux {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_audmux>;
 	status = "okay";
 };
 
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can_xcvr>;
+	status = "okay";
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
-		compatible = "sst,sst25vf016b";
+	flash: flash@0 {
+		compatible = "sst,sst25vf016b", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -166,22 +294,30 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
+	phy-handle = <&ethphy>;
 	phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
-	txen-skew-ps = <0>;
-	txc-skew-ps = <3000>;
-	rxdv-skew-ps = <0>;
-	rxc-skew-ps = <3000>;
-	rxd0-skew-ps = <0>;
-	rxd1-skew-ps = <0>;
-	rxd2-skew-ps = <0>;
-	rxd3-skew-ps = <0>;
-	txd0-skew-ps = <0>;
-	txd1-skew-ps = <0>;
-	txd2-skew-ps = <0>;
-	txd3-skew-ps = <0>;
-	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
-			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			txen-skew-ps = <0>;
+			txc-skew-ps = <3000>;
+			rxdv-skew-ps = <0>;
+			rxc-skew-ps = <3000>;
+			rxd0-skew-ps = <0>;
+			rxd1-skew-ps = <0>;
+			rxd2-skew-ps = <0>;
+			rxd3-skew-ps = <0>;
+			txd0-skew-ps = <0>;
+			txd1-skew-ps = <0>;
+			txd2-skew-ps = <0>;
+			txd3-skew-ps = <0>;
+		};
+	};
 };
 
 &hdmi {
@@ -195,10 +331,10 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	codec: sgtl5000@0a {
+	codec: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
 		reg = <0x0a>;
-		clocks = <&clks 201>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
 		VDDA-supply = <&reg_2p5v>;
 		VDDIO-supply = <&reg_3p3v>;
 	};
@@ -209,6 +345,50 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
+
+	ov5640: camera@40 {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x40>;
+		clocks = <&mipi_xclk>;
+		clock-names = "xclk";
+		DOVDD-supply = <&reg_1p8v>;
+		AVDD-supply = <&reg_2p8v>;
+		DVDD-supply = <&reg_1p5v>;
+		reset-gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; /* NANDF_D5 */
+		powerdown-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>; /* NANDF_WP_B */
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	ov5642: camera@42 {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO2>;
+		clock-names = "xclk";
+		reg = <0x42>;
+		reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+		powerdown-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+		gp-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
 };
 
 &i2c3 {
@@ -239,6 +419,20 @@
 			>;
 		};
 
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b0
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b0
+			>;
+		};
+
+		pinctrl_can_xcvr: can-xcvrgrp {
+			fsl,pins = <
+				/* Flexcan XCVR enable */
+				MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			>;
+		};
+
 		pinctrl_ecspi1: ecspi1grp {
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
@@ -252,26 +446,25 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x100b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x100b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x100b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x100b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x100b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x100b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x100b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x100b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x100b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				/* Phy reset */
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x000b0
-				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
 			>;
 		};
 
-		pinctrl_gpio_keys: gpio_keysgrp {
+		pinctrl_gpio_keys: gpio-keysgrp {
 			fsl,pins = <
 				/* Power Button */
 				MX6QDL_PAD_NANDF_D3__GPIO2_IO03		0x1b0b0
@@ -309,6 +502,72 @@
 			>;
 		};
 
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x1b0b0
+			>;
+		};
+
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_D5__GPIO2_IO05   0x000b0
+				MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08   0x130b0
+				MX6QDL_PAD_GPIO_3__CCM_CLKO2    0x000b0
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
@@ -341,6 +600,12 @@
 			>;
 		};
 
+		pinctrl_usbh1: usbh1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x030b0
+			>;
+		};
+
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
@@ -377,12 +642,14 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";
 
 	lvds-channel@0 {
-		fsl,data-mapping = "spwg";
-		fsl,data-width = <18>;
 		status = "okay";
 
 		port@4 {
@@ -400,18 +667,21 @@
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
 &pwm3 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm3>;
 	status = "okay";
 };
 
 &pwm4 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm4>;
 	status = "okay";
@@ -434,6 +704,7 @@
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
 	status = "okay";
 };
 
@@ -448,8 +719,8 @@
 &usdhc3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
-	cd-gpios = <&gpio7 0 0>;
-	wp-gpios = <&gpio7 1 0>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
@@ -457,7 +728,21 @@
 &usdhc4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc4>;
-	cd-gpios = <&gpio2 6 0>;
+	cd-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index a626e6dd8022..53b080c97f2d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -1,15 +1,9 @@
-/*
- * Copyright 2012 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2012 Freescale Semiconductor, Inc.
+// Copyright 2011 Linaro Ltd.
 
+#include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 
@@ -18,57 +12,58 @@
 		stdout-path = &uart1;
 	};
 
-	memory {
+	memory@10000000 {
+		device_type = "memory";
 		reg = <0x10000000 0x40000000>;
 	};
 
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
 
-		reg_usb_otg_vbus: regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_otg_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio3 22 0>;
-			enable-active-high;
-			vin-supply = <&swbst_reg>;
-		};
+	reg_usb_h1_vbus: regulator-usb-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_h1_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&swbst_reg>;
+	};
 
-		reg_usb_h1_vbus: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "usb_h1_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			gpio = <&gpio1 29 0>;
-			enable-active-high;
-			vin-supply = <&swbst_reg>;
-		};
-
-		reg_audio: regulator@2 {
-			compatible = "regulator-fixed";
-			reg = <2>;
-			regulator-name = "wm8962-supply";
-			gpio = <&gpio4 10 0>;
-			enable-active-high;
-		};
-
-		reg_pcie: regulator@3 {
-			compatible = "regulator-fixed";
-			reg = <3>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_pcie_reg>;
-			regulator-name = "MPCIE_3V3";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			gpio = <&gpio3 19 0>;
-			regulator-always-on;
-			enable-active-high;
-		};
+	reg_audio: regulator-audio {
+		compatible = "regulator-fixed";
+		regulator-name = "wm8962-supply";
+		gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_pcie: regulator-pcie {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pcie_reg>;
+		regulator-name = "MPCIE_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_sensors: regulator-sensors {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sensors_reg>;
+		regulator-name = "sensors-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
 	};
 
 	gpio-keys {
@@ -79,21 +74,21 @@
 		power {
 			label = "Power Button";
 			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_POWER>;
 		};
 
 		volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
 		volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
+			wakeup-source;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
@@ -102,20 +97,27 @@
 		compatible = "fsl,imx6q-sabresd-wm8962",
 			   "fsl,imx-audio-wm8962";
 		model = "wm8962-audio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_hp>;
 		ssi-controller = <&ssi2>;
 		audio-codec = <&codec>;
+		audio-asrc = <&asrc>;
 		audio-routing =
 			"Headphone Jack", "HPOUTL",
 			"Headphone Jack", "HPOUTR",
 			"Ext Spk", "SPKOUTL",
 			"Ext Spk", "SPKOUTR",
 			"AMIC", "MICBIAS",
-			"IN3R", "AMIC";
+			"IN3R", "AMIC",
+			"DMIC", "MICBIAS",
+			"DMICDAT", "DMIC";
 		mux-int-port = <2>;
 		mux-ext-port = <3>;
+		hp-det-gpio = <&gpio7 8 GPIO_ACTIVE_LOW>;
+		mic-det-gpio = <&gpio1 9 GPIO_ACTIVE_LOW>;
 	};
 
-	backlight {
+	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -128,9 +130,50 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_leds>;
 
-		red {
-		        gpios = <&gpio1 2 0>;
-		        default-state = "on";
+		led-red {
+			gpios = <&gpio1 2 0>;
+			default-state = "on";
+		};
+	};
+
+	panel {
+		compatible = "hannstar,hsd100pxn1";
+		backlight = <&backlight_lvds>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_csi0_from_ipu1_csi0_mux {
+	bus-width = <8>;
+	data-shift = <12>; /* Lines 19:12 used */
+	hsync-active = <1>;
+	vsync-active = <1>;
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	remote-endpoint = <&ov5642_to_ipu1_csi0_mux>;
+};
+
+&ipu1_csi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+};
+
+&mipi_csi {
+	status = "okay";
+
+	port@0 {
+		reg = <0>;
+
+		mipi_csi2_in: endpoint {
+			remote-endpoint = <&ov5640_to_mipi_csi2>;
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
 		};
 	};
 };
@@ -141,17 +184,23 @@
 	status = "okay";
 };
 
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
 &ecspi1 {
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio4 9 0>;
+	cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	status = "okay";
 
-	flash: m25p80@0 {
+	flash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
-		compatible = "st,m25p32";
+		compatible = "st,m25p32", "jedec,spi-nor";
 		spi-max-frequency = <20000000>;
 		reg = <0>;
 	};
@@ -160,12 +209,27 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
-	phy-mode = "rgmii";
-	phy-reset-gpios = <&gpio1 25 0>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy>;
+	fsl,magic-packet;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+		};
+	};
 };
 
 &hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi_cec>;
 	ddc-i2c-bus = <&i2c2>;
 	status = "okay";
 };
@@ -196,7 +260,43 @@
 			0x8014 /* 4:FN_DMICCDAT */
 			0x0000 /* 5:Default */
 		>;
-       };
+	};
+
+	accelerometer@1c {
+		compatible = "fsl,mma8451";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c1_mma8451_int>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	ov5642: camera@3c {
+		compatible = "ovti,ov5642";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5642>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		reg = <0x3c>;
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+		status = "disabled";
+
+		port {
+			ov5642_to_ipu1_csi0_mux: endpoint {
+				remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
+				bus-width = <8>;
+				hsync-active = <1>;
+				vsync-active = <1>;
+			};
+		};
+	};
 };
 
 &i2c2 {
@@ -205,7 +305,40 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
-	pmic: pfuze100@08 {
+	touchscreen@4 {
+		compatible = "eeti,egalax_ts";
+		reg = <0x04>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
+	};
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+		reg = <0x3c>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		clock-names = "xclk";
+		DOVDD-supply = <&vgen4_reg>; /* 1.8v */
+		AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
+						rev B board is VGEN5 */
+		DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
+		powerdown-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
+
+		port {
+			ov5640_to_mipi_csi2: endpoint {
+				remote-endpoint = <&mipi_csi2_in>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	pmic: pfuze100@8 {
 		compatible = "fsl,pfuze100";
 		reg = <0x08>;
 
@@ -231,6 +364,7 @@
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
+				regulator-ramp-delay = <6250>;
 			};
 
 			sw3a_reg: sw3a {
@@ -250,6 +384,7 @@
 			sw4_reg: sw4 {
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
 			};
 
 			swbst_reg: swbst {
@@ -311,12 +446,33 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	egalax_ts@04 {
+	egalax_ts@4 {
 		compatible = "eeti,egalax_ts";
 		reg = <0x04>;
 		interrupt-parent = <&gpio6>;
-		interrupts = <7 2>;
-		wakeup-gpios = <&gpio6 7 0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_LOW>;
+	};
+
+	magnetometer@e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_mag3110_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <16 IRQ_TYPE_EDGE_RISING>;
+		vdd-supply = <&reg_sensors>;
+		vddio-supply = <&reg_sensors>;
+	};
+
+	light-sensor@44 {
+		compatible = "isil,isl29023";
+		reg = <0x44>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c3_isl29023_int>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		vcc-supply = <&reg_sensors>;
 	};
 };
 
@@ -361,19 +517,19 @@
 			fsl,pins = <
 				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
 				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
-				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
-				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
-				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
-				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
-				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
-				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
 				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
-				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
-				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
-				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
-				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
-				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
-				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
 				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0a8
 			>;
 		};
@@ -386,6 +542,19 @@
 			>;
 		};
 
+		pinctrl_hdmi_cec: hdmicecgrp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE	0x1f8b0
+			>;
+		};
+
+		pinctrl_hp: hpgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_RST__GPIO7_IO08          0x1b0b0
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x1b0b0
+			>;
+		};
+
 		pinctrl_i2c1: i2c1grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001b8b1
@@ -393,6 +562,12 @@
 			>;
 		};
 
+		pinctrl_i2c1_mma8451_int: i2c1mma8451intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__GPIO1_IO18		0xb0b1
+			>;
+		};
+
 		pinctrl_i2c2: i2c2grp {
 			fsl,pins = <
 				MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
@@ -400,6 +575,12 @@
 			>;
 		};
 
+		pinctrl_i2c2_egalax_int: i2c2egalaxintgrp {
+			fsl,pins = <
+				MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			>;
+		};
+
 		pinctrl_i2c3: i2c3grp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_3__I2C3_SCL		0x4001b8b1
@@ -407,6 +588,48 @@
 			>;
 		};
 
+		pinctrl_i2c3_isl29023_int: i2c3isl29023intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0xb0b1
+			>;
+		};
+
+		pinctrl_i2c3_mag3110_int: i2c3mag3110intgrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D16__GPIO3_IO16		0xb0b1
+			>;
+		};
+
+		pinctrl_ipu1_csi0: ipu1csi0grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x1b0b0
+				MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x1b0b0
+				MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x1b0b0
+				MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x1b0b0
+				MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5640: ov5640grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x1b0b0
+				MX6QDL_PAD_SD1_CLK__GPIO1_IO20  0x1b0b0
+			>;
+		};
+
+		pinctrl_ov5642: ov5642grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
+				MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0
+			>;
+		};
+
 		pinctrl_pcie: pciegrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_17__GPIO7_IO12	0x1b0b0
@@ -425,6 +648,12 @@
 			>;
 		};
 
+		pinctrl_sensors_reg: sensorsreggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_EB3__GPIO2_IO31		0x1b0b0
+			>;
+		};
+
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
 				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
@@ -482,6 +711,12 @@
 				MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
 			>;
 		};
+
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_1__WDOG2_B		0x1b0b0
+			>;
+		};
 	};
 
 	gpio_leds {
@@ -501,18 +736,11 @@
 		fsl,data-width = <18>;
 		status = "okay";
 
-		display-timings {
-			native-mode = <&timing0>;
-			timing0: hsd100pxn1 {
-				clock-frequency = <65000000>;
-				hactive = <1024>;
-				vactive = <768>;
-				hback-porch = <220>;
-				hfront-porch = <40>;
-				vback-porch = <21>;
-				vfront-porch = <7>;
-				hsync-len = <60>;
-				vsync-len = <10>;
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
@@ -521,20 +749,46 @@
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
-	reset-gpio = <&gpio7 12 0>;
+	reset-gpio = <&gpio7 12 GPIO_ACTIVE_LOW>;
+	vpcie-supply = <&reg_pcie>;
 	status = "okay";
 };
 
 &pwm1 {
+	#pwm-cells = <2>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm1>;
 	status = "okay";
 };
 
+&reg_arm {
+       vin-supply = <&sw1a_reg>;
+};
+
+&reg_pu {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_soc {
+       vin-supply = <&sw1c_reg>;
+};
+
+&reg_vdd1p1 {
+	vin-supply = <&vgen5_reg>;
+};
+
+&reg_vdd2p5 {
+	vin-supply = <&vgen5_reg>;
+};
+
 &snvs_poweroff {
 	status = "okay";
 };
 
+&snvs_pwrkey {
+	status = "okay";
+};
+
 &ssi2 {
 	status = "okay";
 };
@@ -562,8 +816,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 2 0>;
-	wp-gpios = <&gpio2 3 0>;
+	cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -571,8 +825,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc3>;
 	bus-width = <8>;
-	cd-gpios = <&gpio2 0 0>;
-	wp-gpios = <&gpio2 1 0>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -584,3 +838,14 @@
 	no-1-8-v;
 	status = "okay";
 };
+
+&wdog1 {
+	status = "disabled";
+};
+
+&wdog2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
new file mode 100644
index 000000000000..02e6d36e85fa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-savageboard.dtsi
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) 2017 Milo Kim <woogyom.kim@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		power {
+			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			wakeup-source;
+		};
+	};
+
+	panel {
+		compatible = "avic,tm097tdh02", "hannstar,hsd100pxn1";
+		backlight = <&panel_bl>;
+		power-supply = <&reg_3p3v>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	panel_bl: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <4>;
+		power-supply = <&reg_3p3v>;
+		pwms = <&pwm1 0 10000>;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>,
+			  <&clks IMX6QDL_CLK_LDB_DI1_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>,
+				 <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
+};
+
+&fec {
+	phy-mode = "rgmii";
+	phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		reg = <0>;
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	#pwm-cells = <2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+/* SD card */
+&usdhc3 {
+	bus-width = <4>;
+	cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+	no-1-8-v;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sd>;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc4 {
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_emmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_emmc: emmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x17059
+			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x10059
+			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x17059
+			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x17059
+			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x17059
+			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x17059
+			MX6QDL_PAD_SD4_DAT4__SD4_DATA4		0x17059
+			MX6QDL_PAD_SD4_DAT5__SD4_DATA5		0x17059
+			MX6QDL_PAD_SD4_DAT6__SD4_DATA6		0x17059
+			MX6QDL_PAD_SD4_DAT7__SD4_DATA7		0x17059
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			/* PHY reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_sd: sdgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+			/* CD pin */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00		0x1b0b1
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
new file mode 100644
index 000000000000..b81799d7076a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+/ {
+	touchscreen {
+		compatible = "resistive-adc-touch";
+		io-channels = <&adc_ts 1>, <&adc_ts 3>, <&adc_ts 4>, <&adc_ts 5>;
+		io-channel-names = "y", "z1", "z2", "x";
+		touchscreen-min-pressure = <65000>;
+		touchscreen-inverted-y;
+		touchscreen-swapped-x-y;
+		touchscreen-x-plate-ohms = <300>;
+		touchscreen-y-plate-ohms = <800>;
+	};
+};
+
+&ecspi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi4>;
+	cs-gpios = <&gpio3 20 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc_ts: adc@0 {
+		compatible = "ti,tsc2046e-adc";
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_touch>;
+		pinctrl-names ="default";
+		spi-max-frequency = <1000000>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
+		#io-channel-cells = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <1>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@3 {
+			reg = <3>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@4 {
+			reg = <4>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			settling-time-us = <700>;
+			oversampling-ratio = <5>;
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi4: ecspi4grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D28__ECSPI4_MOSI			0x100b1
+			MX6QDL_PAD_EIM_D22__ECSPI4_MISO			0x000b1
+			MX6QDL_PAD_EIM_D21__ECSPI4_SCLK			0x000b1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x40000058
+		>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = <
+			/* external pull up */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19			0x10040
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
new file mode 100644
index 000000000000..2731faede1cb
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi
@@ -0,0 +1,491 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2020 Pengutronix, Ulrich Oelmann <kernel@pengutronix.de>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	aliases {
+		can0 = &can1;
+		can1 = &can2;
+		mdio-gpio0 = &mdio;
+		nand = &gpmi;
+		rtc0 = &i2c_rtc;
+		rtc1 = &snvs;
+		usb0 = &usbh1;
+		usb1 = &usbotg;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, /* 24V */
+		              <&adc 1>; /* temperature */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "D1";
+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+			function = LED_FUNCTION_STATUS;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "D2";
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "D3";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+	};
+
+	mdio: mdio {
+		compatible = "microchip,mdio-smi0";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>,
+			<&gpio1 22 GPIO_ACTIVE_HIGH>;
+
+		switch@0 {
+			compatible = "microchip,ksz8873";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_switch>;
+			interrupt-parent = <&gpio3>;
+			interrupt = <30 IRQ_TYPE_LEVEL_HIGH>;
+			reset-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+			reg = <0>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ports@0 {
+					reg = <0>;
+					phy-mode = "internal";
+					label = "lan1";
+				};
+
+				ports@1 {
+					reg = <1>;
+					phy-mode = "internal";
+					label = "lan2";
+				};
+
+				ports@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&fec>;
+					phy-mode = "rmii";
+
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+
+	};
+
+	clk50m_phy: phy-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+		clock-output-names = "enet_ref_pad";
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		vin-supply = <&reg_5v0>;
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_24v0: regulator-24v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "24v0";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+	};
+
+	reg_can1_stby: regulator-can1-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can1_stby>;
+		regulator-name = "can1-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 31 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_can2_stby: regulator-can2-stby {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can2_stby>;
+		regulator-name = "can2-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
+
+	reg_tft_vcom: regulator-tft-vcom {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 20000 0>;
+		regulator-name = "tft_vcom";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		regulator-always-on;
+		voltage-table = <3600000 26>;
+	};
+
+	reg_vcc_mmc: regulator-vcc-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc>;
+		vin-supply = <&reg_3v3>;
+		regulator-name = "mmc_vcc_supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		startup-delay-us = <100>;
+	};
+
+	reg_vcc_mmc_io: regulator-vcc-mmc-io {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_vcc_mmc_io>;
+		vin-supply = <&reg_5v0>;
+		regulator-name = "mmc_io_supply";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		states = <1800000 0x1>, <3300000 0x0>;
+		startup-delay-us = <100>;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "okay";
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <54000000>;
+		reg = <0>;
+	};
+};
+
+&ecspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	adc: adc@0 {
+		compatible = "microchip,mcp3002";
+		reg = <0>;
+		vref-supply = <&reg_3v3>;
+		spi-max-frequency = <1000000>;
+		#io-channel-cells = <1>;
+	};
+};
+
+&clks {
+	clocks = <&clk50m_phy>;
+	clock-names = "enet_ref_pad";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF_SEL>;
+	assigned-clock-parents = <&clk50m_phy>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-supply = <&reg_3v3>;
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	i2c_rtc: rtc@51 {
+		compatible = "nxp,pcf85063";
+		reg = <0x51>;
+		quartz-load-femtofarads = <12500>;
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	#pwm-cells = <2>;
+	status = "okay";
+};
+
+&pwm3 {
+	/* used for LCD contrast control */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm3>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* no usbh2 */
+&usbphynop1 {
+	status = "disabled";
+};
+
+/* no usbh3 */
+&usbphynop2 {
+	status = "disabled";
+};
+
+&usbotg {
+	vbus-supply = <&reg_5v0>;
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
+	cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
+	mmc-ddr-1_8v;
+	vmmc-supply = <&reg_vcc_mmc>;
+	vqmmc-supply = <&reg_vcc_mmc_io>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__FLEXCAN1_TX			0x3008
+			MX6QDL_PAD_GPIO_8__FLEXCAN1_RX			0x1b000
+		>;
+	};
+
+	pinctrl_can1_stby: can1stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31			0x13008
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX		0x3008
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX		0x1b000
+		>;
+	};
+
+	pinctrl_can2_stby: can2stbygrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11			0x13008
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO			0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI			0xb1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK			0xb1
+			/* *no* external pull up */
+			MX6QDL_PAD_EIM_D24__GPIO3_IO24			0x58
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO			0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI			0xb1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK			0xb1
+			/* external pull up */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26			0x58
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* RMII 50 MHz */
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN		0x100f5
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN		0x100f5
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0		0x100c0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1		0x100c0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0		0x100f5
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1		0x100f5
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK		0x1b0b0
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05			0x58
+			/* GPIO for "link active" */
+			MX6QDL_PAD_ENET_RX_ER__GPIO1_IO24		0x3038
+		>;
+	};
+
+	pinctrl_gpmi_nand: gpminandgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CLE__NAND_CLE			0xb0b1
+			MX6QDL_PAD_NANDF_ALE__NAND_ALE			0xb0b1
+			MX6QDL_PAD_NANDF_RB0__NAND_READY_B		0xb000
+			MX6QDL_PAD_NANDF_CS0__NAND_CE0_B		0xb0b1
+			MX6QDL_PAD_NANDF_CS1__NAND_CE1_B		0xb0b1
+			MX6QDL_PAD_SD4_CMD__NAND_RE_B			0xb0b1
+			MX6QDL_PAD_SD4_CLK__NAND_WE_B			0xb0b1
+			MX6QDL_PAD_NANDF_D0__NAND_DATA00		0xb0b1
+			MX6QDL_PAD_NANDF_D1__NAND_DATA01		0xb0b1
+			MX6QDL_PAD_NANDF_D2__NAND_DATA02		0xb0b1
+			MX6QDL_PAD_NANDF_D3__NAND_DATA03		0xb0b1
+			MX6QDL_PAD_NANDF_D4__NAND_DATA04		0xb0b1
+			MX6QDL_PAD_NANDF_D5__NAND_DATA05		0xb0b1
+			MX6QDL_PAD_NANDF_D6__NAND_DATA06		0xb0b1
+			MX6QDL_PAD_NANDF_D7__NAND_DATA07		0xb0b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_3__I2C3_SCL		0x40010878
+			/* external 10 k pull up */
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x40010878
+		>;
+	};
+
+	pinctrl_mdio: mdiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22		0x100b1
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31			0xb1
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__PWM2_OUT			0x58
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT1__PWM3_OUT			0x58
+		>;
+	};
+
+	pinctrl_switch: switchgrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30			0xb0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA		0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA		0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17059
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01			0x1b040
+			/* SoC internal pull up required */
+			MX6QDL_PAD_SD3_DAT5__GPIO7_IO00			0x1b040
+		>;
+	};
+
+	pinctrl_vcc_mmc: vccmmcgrp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08			0x58
+		>;
+	};
+
+	pinctrl_vcc_mmc_io: vccmmciogrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_18__GPIO7_IO13			0x58
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
new file mode 100644
index 000000000000..48c9ce051f47
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+/ {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
+		pwms = <&pwm2 0 20000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <17>;
+		default-brightness-level = <8>;
+		power-supply = <&reg_24v0>;
+	};
+
+	display {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1>;
+
+		port@0 {
+			reg = <0>;
+
+			display0_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "logictechno,lttd800480070-l2rt";
+		backlight = <&backlight>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display0_out>;
+			};
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display0_in>;
+};
+
+&iomuxc {
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_TD3__GPIO6_IO23		0x58
+		>;
+	};
+
+	pinctrl_ipu1: ipu1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x10
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x10
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x10
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x10
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x10
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x10
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x10
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x10
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x10
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x10
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x10
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x10
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x10
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x10
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x10
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x10
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x10
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x10
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x10
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x10
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x10
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x10
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x10
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x10
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x10
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x10
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x10
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x10
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-solidsense.dtsi b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
new file mode 100644
index 000000000000..234827e554d0
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-solidsense.dtsi
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2021 Russell King <rmk@armlinux.org.uk>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/leds/common.h>
+
+/ {
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_solidsense_leds>;
+
+		/* Red/Green LED1 - next to WiFi SMA */
+		led-11 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+		};
+
+		led-12 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <0>;
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+		};
+
+		/* Red/Green LED2 - next to GPS SMA */
+		led-21 {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+		};
+
+		led-22 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_INDICATOR;
+			function-enumerator = <1>;
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&audio {
+	status = "disabled";
+};
+
+&ecspi2 {
+	status = "disabled";
+};
+
+&i2c3 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>, <&pinctrl_solidsense_hog>;
+
+	solidsense {
+		pinctrl_solidsense_hog: solidsense-hog {
+			fsl,pins = <
+				/* Nordic RESET_N */
+				MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x400130b1
+				/* Nordic Chip 1 SWDIO - GPIO 125 */
+				MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29 0x400130b1
+				/* Nordic Chip 1 SWDCLK - GPIO 59 */
+				/* already claimed in the HB2 hogs */
+				/* MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x400130b1 */
+				/* Nordic Chip 2 SWDIO - GPIO 81 */
+				MX6QDL_PAD_EIM_D17__GPIO3_IO17 0x400130b1
+				/* Nordic Chip 2 SWCLK - GPIO 82 */
+				MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_leds: solidsense-leds {
+			fsl,pins = <
+				/* Red LED 1 - GPIO 58 */
+				MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x400130b1
+				/* Green LED 1 - GPIO 55 */
+				MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x400130b1
+				/* Red LED 2 - GPIO 57 */
+				MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x400130b1
+				/* Green LED 2 - GPIO 56 */
+				MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x400130b1
+			>;
+		};
+
+		pinctrl_solidsense_uart2: solidsense-uart2 {
+			fsl,pins = <
+				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA	0x1b0b1
+			>;
+		};
+
+		pinctrl_solidsense_uart3: solidsense-uart3 {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&pwm1 {
+	status = "disabled";
+};
+
+&sgtl5000 {
+	status = "disabled";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_solidsense_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
new file mode 100644
index 000000000000..b55af61dfeca
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-brcm.dtsi
@@ -0,0 +1,144 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	clk_brcm: brcm-clock {
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_osc>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	reg_brcm: brcm-reg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio3 19 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_brcm_reg>;
+		regulator-name = "brcm_reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <200000>;
+	};
+
+	usdhc1_pwrseq: usdhc1_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>,
+			      <&gpio6 0 GPIO_ACTIVE_LOW>;
+		clocks = <&clk_brcm>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_brcm_bt: microsom-brcm-bt {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+				MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x40013070
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_osc: microsom-brcm-osc {
+			fsl,pins = <
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_reg: microsom-brcm-reg {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x40013070
+			>;
+		};
+
+		pinctrl_microsom_brcm_wifi: microsom-brcm-wifi {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x40013070
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+				MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional BRCM Wifi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_bt &pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+/* USDHC1 - Connected to optional BRCM Wifi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_brcm_wifi &pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_brcm>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
new file mode 100644
index 000000000000..5f3b8baab20f
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-emmc.dtsi
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_usdhc3: microsom-usdhc3 {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+				MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+				MX6QDL_PAD_SD3_RST__SD3_RESET  0x17059
+			>;
+		};
+	};
+};
+
+/* USDHC3 - eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
new file mode 100644
index 000000000000..352ac585ca6b
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som-ti.dtsi
@@ -0,0 +1,171 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	nvcc_sd1: regulator-nvcc-sd1 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "nvcc_sd1";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	clk_ti_wifi: ti-wifi-clock {
+		/* This is a hack around the kernel - using "fixed clock"
+		 * results in the "pinctrl" properties being ignored, and
+		 * the clock not being output.  Instead, use a gated clock
+		 * and the unrouted WL_XTAL_PU gpio.
+		 */
+		compatible = "gpio-gate-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_clk>;
+		enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	pwrseq_ti_wifi: ti-wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_en>;
+		reset-gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_ti_bt: microsom-ti-bt {
+			fsl,pins = <
+				/* BT_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_clk: microsom-ti-clk {
+			fsl,pins = <
+				/* EXT_32K */
+				MX6QDL_PAD_GPIO_8__XTALOSC_REF_CLK_32K	0x1b0b0
+				/* WL_XTAL_PU (unrouted) */
+				MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_en: microsom-ti-wifi-en {
+			fsl,pins = <
+				/* WLAN_EN_SOC */
+				MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_ti_wifi_irq: microsom-ti-wifi-irq {
+			fsl,pins = <
+				/* WLAN_IRQ */
+				MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x40013070
+			>;
+		};
+
+		pinctrl_microsom_uart4: microsom-uart4 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
+			>;
+		};
+
+		pinctrl_microsom_usdhc1: microsom-usdhc1 {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
+				MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
+			>;
+		};
+	};
+};
+
+/* UART4 - Connected to optional TI Wi-Fi/BT/FM */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart4>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		clocks = <&clk_ti_wifi>;
+		clock-names = "ext_clock";
+		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_bt>;
+	};
+};
+
+/* USDHC1 - Connected to optional TI Wi-Fi/BT/FM */
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_usdhc1>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&pwrseq_ti_wifi>;
+	cap-power-off-card;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	/* vqmmc-supply = <&nvcc_sd1>; - MMC layer doesn't like it! */
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupts-extended = <&gpio6 4 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_microsom_ti_wifi_irq>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
new file mode 100644
index 000000000000..ce543e325cd3
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2013,2014 Russell King
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-name = "vcc_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-mode = "rgmii-id";
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
+	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/*
+		 * The PHY can appear at either address 0 or 4 due to the
+		 * configuration (LED) pin not being pulled sufficiently.
+		 */
+		ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+			qca,smarteee-tw-us-1g = <24>;
+		};
+
+		/*
+		 * ADIN1300 (som rev 1.9 or later) is always at address 1. It
+		 * will be enabled automatically by U-Boot if detected.
+		 */
+		ethernet-phy@1 {
+			reg = <1>;
+			adi,phy-output-clock = "125mhz-free-running";
+			status = "disabled";
+		};
+	};
+};
+
+&iomuxc {
+	microsom {
+		pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 {
+			fsl,pins = <
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b8b0
+				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+				/* AR8035 reset */
+				MX6QDL_PAD_KEY_ROW4__GPIO4_IO15		0x130b0
+				/* AR8035 interrupt */
+				MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+				/* GPIO16 -> AR8035 25MHz */
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x13030
+				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+				/* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
+				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x0a0b1
+				/* AR8035 pin strapping: IO voltage: pull up */
+				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+				/* AR8035 pin strapping: PHYADDR#0: pull down */
+				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x13030
+				/* AR8035 pin strapping: PHYADDR#1: pull down */
+				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x13030
+				/* AR8035 pin strapping: MODE#1: pull up */
+				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+				/* AR8035 pin strapping: MODE#3: pull up */
+				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+				/* AR8035 pin strapping: MODE#0: pull down */
+				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x13030
+
+				/*
+				 * As the RMII pins are also connected to RGMII
+				 * so that an AR8030 can be placed, set these
+				 * to high-z with the same pulls as above.
+				 * Use the GPIO settings to avoid changing the
+				 * input select registers.
+				 */
+				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x03000
+				MX6QDL_PAD_ENET_RXD0__GPIO1_IO27	0x03000
+				MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x03000
+			>;
+		};
+
+		pinctrl_microsom_uart1: microsom-uart1 {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+			>;
+		};
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_microsom_uart1>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
new file mode 100644
index 000000000000..344ea935c7da
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6.dtsi
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "supply-3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&ecspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	m25p80: flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		m25p,fast-read;
+	};
+};
+
+&iomuxc {
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			/* HYS, SPEED = MED, 100k up, DSE = 011, SRE_FAST */
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x1b099
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0xb099
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0xb099
+			 /* eCSPI1 SS1 */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19 0xb099
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c1_recovery: i2c1recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26 0x4001b899
+			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b899
+			MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b899
+		>;
+	};
+
+	pinctrl_i2c3_recovery: i2c3recoverygrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b899
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b899
+		>;
+	};
+
+	pinctrl_pmic: pmicgrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b099 /* PMIC irq */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD    0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK    0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
+		>;
+	};
+};
+
+&pmic {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pmic>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+
+	regulators {
+		reg_vddcore: sw1ab {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-always-on;
+		};
+
+		reg_vddsoc: sw1c {
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <1875000>;
+			regulator-always-on;
+		};
+
+		reg_gen_3v3: sw2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_ddr_1v5a: sw3a {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-always-on;
+		};
+
+		reg_ddr_1v5b: sw3b {
+			regulator-min-microvolt = <400000>;
+			regulator-max-microvolt = <1975000>;
+			regulator-always-on;
+		};
+
+		sw4_reg: sw4 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_5v_600mA: swbst {
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5150000>;
+			regulator-always-on;
+		};
+
+		reg_snvs_3v: vsnvs {
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-always-on;
+		};
+
+		reg_vrefddr: vrefddr {
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		reg_vgen1_1v5: vgen1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1550000>;
+			/* not used */
+		};
+
+		reg_vgen2_1v2_eth: vgen2 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <1550000>;
+			regulator-always-on;
+		};
+
+		reg_vgen3_2v8: vgen3 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen4_1v8: vgen4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen5_1v8_eth: vgen5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+
+		reg_vgen6_3v3: vgen6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	non-removable;
+	disable-wp;
+	no-sd;
+	no-sdio;
+	bus-width = <8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	mmccard: mmccard@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
new file mode 100644
index 000000000000..aff46f3040c1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6a.dtsi
@@ -0,0 +1,55 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&fec {
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+};
+
+&i2c1 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_recovery>;
+	scl-gpios = <&gpio5 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
+
+&iomuxc {
+	/*
+	 * This pinmuxing is required for the ERR006687 workaround. Board
+	 * DTS files that enable the FEC controller with
+	 * fsl,err006687-workaround-present must include this group.
+	 */
+	pinctrl_enet_fix: enetfixgrp {
+		fsl,pins = <
+			/* ENET ping patch */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
+		>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
new file mode 100644
index 000000000000..a3f6543c3aaa
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-tqma6b.dtsi
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright 2013 Sascha Hauer, Pengutronix
+ * Copyright 2013-2017 Markus Niebel <Markus.Niebel@tq-group.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+&i2c3 {
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_recovery>;
+	scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	pmic: pmic@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+	};
+
+	sensor@48 {
+		compatible = "national,lm75";
+		reg = <0x48>;
+	};
+
+	eeprom@50 {
+		compatible = "st,24c64", "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_3p3v>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts4900.dtsi b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
new file mode 100644
index 000000000000..f88da757edda
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ts4900.dtsi
@@ -0,0 +1,479 @@
+/*
+ * Copyright 2015 Technologic Systems
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	aliases {
+		ethernet0 = &fec;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	isl12022: rtc@6f {
+		compatible = "isil,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts4900-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpio = <32>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard flash CS1# */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK	0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x100b1 /* Offboard CS0# */
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x100b1 /* FPGA CS1# */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b1 /* FPGA_RESET# */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1 /* FPGA_DONE */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M	0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x1b0b1 /* FPGA_IRQ */
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x4001b0a8
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b0b1 /* ETH_PHY_RESET */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b0b1
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b0b1
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b0b1
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b0b1
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b1 /* OFF_BD_RESET# */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b0b1 /* EN_USB_5V# */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b0b1 /* EN_LCD_3.3V */
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1 /* DIO_1 */
+			MX6QDL_PAD_GPIO_6__GPIO1_IO06		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b1 /* DIO_3 */
+			MX6QDL_PAD_GPIO_16__GPIO7_IO11		0x1b0b1 /* DIO_4 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b1 /* DIO_5 */
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1 /* DIO_7 */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b1 /* DIO_8 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b1 /* DIO_9 */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b1 /* DIO_0 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b1 /* DIO_6 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b1 /* CPU_DIO_A */
+			MX6QDL_PAD_SD4_DAT7__GPIO2_IO15		0x1b0b1 /* DIO_2 */
+			MX6QDL_PAD_SD3_RST__GPIO7_IO08		0x1b0b1 /* CPU_DIO_B */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b0b1 /* BUS_ALE# */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b0b1 /* DIO_15 */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b0b1 /* BUS_DIR */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b1 /* BUS_CS# */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b0b1 /* DIO_14 */
+			MX6QDL_PAD_EIM_A20__GPIO2_IO18		0x1b0b1 /* DIO_16 */
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b0b1 /* DIO_12 */
+			MX6QDL_PAD_EIM_A22__GPIO2_IO16		0x1b0b1 /* DIO_18 */
+			MX6QDL_PAD_EIM_A23__GPIO6_IO06		0x1b0b1 /* DIO_19 */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b0b1 /* DIO_20 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b1 /* BUS_BHE# */
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b0b1 /* DIO_13 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b0b1 /* EIM_WAIT# */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b0b1 /* DIO_10 */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b0b1 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b0b1 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b0b1 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b0b1 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b0b1 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b0b1 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b0b1 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b0b1 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b0b1 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b0b1 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b0b1 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b0b1 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b0b1 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b0b1 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b0b1 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b0b1 /* MUX_AD_15 */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b1 /* LCD_CLK */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b1 /* DE */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b1 /* Hsync */
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19		0x1b0b1 /* Vsync */
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT8__GPIO4_IO29	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b1
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b1
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1 /* RED_LED# */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b1 /* GREEN_LED# */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b0b1
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b0b1 /* EN_SD_POWER# */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbh1 {
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
+/* SD */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	fsl,wp-controller;
+	status = "okay";
+};
+
+/* eMMC */
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
new file mode 100644
index 000000000000..1e0a041e9f60
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -0,0 +1,594 @@
+/*
+ * Copyright 2015 Technologic Systems
+ * Copyright 2017 Savoir-Faire Linux
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License
+ *     version 2 as published by the Free Software Foundation.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds1>;
+		compatible = "gpio-leds";
+
+		green-led {
+			label = "green-led";
+			gpios = <&gpio3 27 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		red-led {
+			label = "red-led";
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		yel-led {
+			label = "yellow-led";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		blue-led {
+			label = "blue-led";
+			gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+
+		en-usb-5v-led {
+			label = "en-usb-5v";
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		sel-dc-usb-led {
+			label = "sel_dc_usb";
+			gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3p3v";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_can1_3v3: reg_can1_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_can1_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_can2_3v3: en-reg_can2_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "reg_can2_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio6 31 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usb_otg_vbus: regulator-usb-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_wlan_vmmc: regulator_wlan_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan_vmmc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio8 14 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
+	sound-sgtl5000 {
+		audio-codec = <&sgtl5000>;
+		audio-routing =
+			"MIC_IN", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"Headphone Jack", "HP_OUT";
+		compatible = "fsl,imx-audio-sgtl5000";
+		model = "On-board Codec";
+		mux-ext-port = <3>;
+		mux-int-port = <1>;
+		ssi-controller = <&ssi1>;
+	};
+};
+
+&audmux {
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_3v3>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_3v3>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	n25q064: flash@0 {
+		compatible = "micron,n25q064", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <
+		&gpio5 31 GPIO_ACTIVE_LOW
+		&gpio7 12 GPIO_ACTIVE_LOW
+		&gpio5 18 GPIO_ACTIVE_LOW
+	>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/delete-property/ interrupts;
+	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
+			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+	fsl,err006687-workaround-present;
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	m41t00s: rtc@68 {
+		compatible = "m41t00";
+		reg = <0x68>;
+	};
+
+	isl12022: rtc@6f {
+		compatible = "isl,isl12022";
+		reg = <0x6f>;
+	};
+
+	gpio8: gpio@28 {
+		compatible = "technologic,ts7970-gpio";
+		reg = <0x28>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		ngpios = <62>;
+	};
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sgtl5000>;
+		reg = <0x0a>;
+		clocks = <&clks IMX6QDL_CLK_CKO>;
+		VDDA-supply = <&reg_3p3v>;
+		VDDIO-supply = <&reg_3p3v>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x100b1 /* Onboard Flash CS */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2 {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK      0x100b1
+			MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI      0x100b1
+			MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO     0x100b1
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31      0x100b1 /* FPGA_SPI_CS0 */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12         0x100b1 /* FPGA_SPI_CS1 */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18     0x100b1 /* HD1_SPI_CS */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21      0x1b088 /* FPGA_RESET */
+			MX6QDL_PAD_GPIO_3__XTALOSC_REF_CLK_24M 0x10    /* FPGA 24MHZ */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20    0x1b088 /* FPGA_IRQ_0 */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04          0x1b088 /* FPGA_IRQ_1 */
+		>;
+	};
+
+	pinctrl_enet: enet {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b088
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x1b088 /* ETH_PHY_RESET */
+			MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x1b088
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x1b088
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x1b088 /* EN_CAN_1 */
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x1b088
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x1b088
+			MX6QDL_PAD_EIM_BCLK__GPIO6_IO31		0x1b088 /* EN_CAN_2 */
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* Onboard */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b088 /* USB_HUB_RESET */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b088 /* SEL_DC_USB */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x1b088 /* EN_USB_5V */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b088 /* JTAG_FPGA_TMS */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b088 /* JTAG_FPGA_TCK */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b088 /* JTAG_FPGA_TDO */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b088 /* JTAG_FPGA_TDI */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b088 /* GYRO_INT */
+			MX6QDL_PAD_EIM_OE__GPIO2_IO25		0x1b088 /* MODBUS_FAULT */
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x1b088 /* BUS_DIR/JP_SD_BOOT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x1b088 /* EN_MODBUS_24V */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b088 /* EN_MODBUS_3V */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b088 /* I210_RESET */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b088 /* EN_RTC_PWR */
+			MX6QDL_PAD_SD3_DAT4__GPIO7_IO01		0x1b088 /* REVSTRAP1 */
+
+			/* Offboard */
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b088 /* LCD_D09 */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b088 /* HD1_IRQ */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b088 /* LCD_D10 */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x1b088 /* LCD_D11 */
+			MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x1b088 /* BUS_BHE */
+			MX6QDL_PAD_EIM_LBA__GPIO2_IO27		0x1b088 /* BUS_ALE */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b088 /* BUS_CS */
+			MX6QDL_PAD_EIM_A24__GPIO5_IO04		0x1b088 /* DIO_20 */
+			MX6QDL_PAD_EIM_WAIT__GPIO5_IO00		0x1b088 /* BUS_WAIT */
+			MX6QDL_PAD_EIM_DA0__GPIO3_IO00		0x1b088 /* MUX_AD_00 */
+			MX6QDL_PAD_EIM_DA1__GPIO3_IO01		0x1b088 /* MUX_AD_01 */
+			MX6QDL_PAD_EIM_DA2__GPIO3_IO02		0x1b088 /* MUX_AD_02 */
+			MX6QDL_PAD_EIM_DA3__GPIO3_IO03		0x1b088 /* MUX_AD_03 */
+			MX6QDL_PAD_EIM_DA4__GPIO3_IO04		0x1b088 /* MUX_AD_04 */
+			MX6QDL_PAD_EIM_DA5__GPIO3_IO05		0x1b088 /* MUX_AD_05 */
+			MX6QDL_PAD_EIM_DA6__GPIO3_IO06		0x1b088 /* MUX_AD_06 */
+			MX6QDL_PAD_EIM_DA7__GPIO3_IO07		0x1b088 /* MUX_AD_07 */
+			MX6QDL_PAD_EIM_DA8__GPIO3_IO08		0x1b088 /* MUX_AD_08 */
+			MX6QDL_PAD_EIM_DA9__GPIO3_IO09		0x1b088 /* MUX_AD_09 */
+			MX6QDL_PAD_EIM_DA10__GPIO3_IO10		0x1b088 /* MUX_AD_10 */
+			MX6QDL_PAD_EIM_DA11__GPIO3_IO11		0x1b088 /* MUX_AD_11 */
+			MX6QDL_PAD_EIM_DA12__GPIO3_IO12		0x1b088 /* MUX_AD_12 */
+			MX6QDL_PAD_EIM_DA13__GPIO3_IO13		0x1b088 /* MUX_AD_13 */
+			MX6QDL_PAD_EIM_DA14__GPIO3_IO14		0x1b088 /* MUX_AD_14 */
+			MX6QDL_PAD_EIM_DA15__GPIO3_IO15		0x1b088 /* MUX_AD_15 */
+
+			/* Strapping only */
+			MX6QDL_PAD_EIM_A18__GPIO2_IO20		0x1b088
+			MX6QDL_PAD_EIM_A21__GPIO2_IO17		0x1b088
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__I2C1_SCL		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__I2C1_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__GPIO3_IO21		0x4001b8b1
+			MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2gpiogrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds1: leds1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x1b088 /* GREEN_LED */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b088 /* RED_LED */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b088 /* YEL_LED */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b088 /* IMX6_BLUE_LED */
+		>;
+	};
+
+	pinctrl_sgtl5000: sgtl5000grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+			MX6QDL_PAD_GPIO_0__CCM_CLKO1		0x130b0 /* Audio CLK */
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA	0x1b088
+			MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b088
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b088
+			MX6QDL_PAD_SD4_DAT6__UART2_CTS_B	0x1b088
+			MX6QDL_PAD_SD4_DAT5__UART2_RTS_B	0x1b088
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b088
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b088
+			MX6QDL_PAD_EIM_D30__UART3_RTS_B		0x1b088
+			MX6QDL_PAD_EIM_D31__UART3_CTS_B		0x1b088
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b088
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b088
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b088
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x17059
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x10059
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x17059
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x17059
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x17059
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x17059
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x17059 /* WIFI IRQ */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
+			MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1b088 /* EN_SD_POWER */
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
+		>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&snvs_rtc {
+	status = "disabled";
+};
+
+&ssi1 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
author	Michal Swiatkowski <michal.swiatkowski@linux.intel.com>	2024-02-23 07:40:24 +0100
committer	Tony Nguyen <anthony.l.nguyen@intel.com>	2024-03-01 09:40:11 -0800
commit	4035c72dc1ba81a96f94de84dfd5409056c1d9c9 (patch)
tree	1ae02b7949be73c4ede44f2f844ec7232c422e09 /include/vdso
parent	99099c6bc75a30b76bb5d6774a0509ab6f06af05 (diff)