diff options
Diffstat (limited to 'Documentation/ABI/stable')
| -rw-r--r-- | Documentation/ABI/stable/sysfs-block | 33 | ||||
| -rw-r--r-- | Documentation/ABI/stable/sysfs-class-backlight | 7 | ||||
| -rw-r--r-- | Documentation/ABI/stable/sysfs-driver-mlxreg-io | 98 | ||||
| -rw-r--r-- | Documentation/ABI/stable/sysfs-kernel-time-aux-clocks | 5 |
4 files changed, 142 insertions, 1 deletions
diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 4ba771b56b3b..803f578dc023 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -778,6 +778,39 @@ Description: 0, write zeroes is not supported by the device. +What: /sys/block/<disk>/queue/write_zeroes_unmap_max_hw_bytes +Date: January 2025 +Contact: Zhang Yi <yi.zhang@huawei.com> +Description: + [RO] This file indicates whether a device supports zeroing data + in a specified block range without incurring the cost of + physically writing zeroes to the media for each individual + block. If this parameter is set to write_zeroes_max_bytes, the + device implements a zeroing operation which opportunistically + avoids writing zeroes to media while still guaranteeing that + subsequent reads from the specified block range will return + zeroed data. This operation is a best-effort optimization, a + device may fall back to physically writing zeroes to the media + due to other factors such as misalignment or being asked to + clear a block range smaller than the device's internal + allocation unit. If this parameter is set to 0, the device may + have to write each logical block media during a zeroing + operation. + + +What: /sys/block/<disk>/queue/write_zeroes_unmap_max_bytes +Date: January 2025 +Contact: Zhang Yi <yi.zhang@huawei.com> +Description: + [RW] While write_zeroes_unmap_max_hw_bytes is the hardware limit + for the device, this setting is the software limit. Since the + unmap write zeroes operation is a best-effort optimization, some + devices may still physically writing zeroes to media. So the + speed of this operation is not guaranteed. Writing a value of + '0' to this file disables this operation. Otherwise, this + parameter should be equal to write_zeroes_unmap_max_hw_bytes. + + What: /sys/block/<disk>/queue/zone_append_max_bytes Date: May 2020 Contact: linux-block@vger.kernel.org diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight index 6102d6bebdf9..40b8c46b95b2 100644 --- a/Documentation/ABI/stable/sysfs-class-backlight +++ b/Documentation/ABI/stable/sysfs-class-backlight @@ -26,7 +26,12 @@ Date: March 2006 KernelVersion: 2.6.17 Contact: Richard Purdie <rpurdie@rpsys.net> Description: - Show the actual brightness by querying the hardware. + Show the actual brightness by querying the hardware. Due + to implementation differences in hardware this may not + match the value in 'brightness'. For example some hardware + may treat blanking differently or have custom power saving + features. Userspace should generally use the values in + 'brightness' to make decisions. Users: HAL What: /sys/class/backlight/<backlight>/max_brightness diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io index 2cdfd09123da..f59461111221 100644 --- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io +++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io @@ -715,3 +715,101 @@ Description: This file shows 1 in case the system reset happened due to the switch board. The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/global_wp_request +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file when written 1 activates request to allow access to + the write protected flashes. Such request can be performed only + for system equipped with BMC (Board Management Controller), + which can grant access to protected flashes. In case BMC allows + access - it will respond with "global_wp_response". BMC decides + regarding time window of granted access. After granted window is + expired, BMC will change value back to 0. + Default value is 0. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/global_wp_response +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file, when set 1, indicates that access to protected + flashes have been granted to host CPU by BMC. + Default value is 0. + + The file is read only. + +What: /sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/shutdown_unlock +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: When ASICs are getting overheated, system protection + hardware mechanism enforces system reboot. After system + reboot ASICs come up in locked state. To unlock ASICs, + this file should be written 1 + Default value is 0. + + The file is read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/boot_progress +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show the Data Process Unit board boot progress + state. Valid states are: + - 4 : OS starting. + - 5 : OS running. + - 6 : Low-Power Standby. + + The file is read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/dpu_id +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: This file shows hardware Id of Data Process Unit board. + + The file is read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/reset_aux_pwr_or_reload +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/reset_dpu_thermal +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/reset_from_main_board +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files expose the cause of the most recent reset of the Data + Processing Unit (DPU) board. The possible causes are: + - Power auxiliary outage or power reload. + - Thermal shutdown. + - Reset request from the main board. + Value 1 in file means this is reset cause, 0 - otherwise. Only one of + the above causes could be 1 at the same time, representing only last + reset cause. + + The files are read only. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/perst_rst +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/phy_rst +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/tpm_rst +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/usbphy_rst +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files allow to reset hardware components of Data Process + Unit board. Respectively PCI, Ethernet PHY, TPM and USB PHY + resets. + Default values for all the attributes is 1. Writing 0 will + cause reset of the related component. + + The files are read/write. + +What: /sys/devices/platform/mlxplat/i2c_mlxcpld.*/i2c-*/i2c-*/*-00**/mlxreg-io.*/hwmon/hwmon*/ufm_upgrade +Date: May 2025 +KernelVersion: 6.16 +Contact: Vadim Pasternak <vadimp@nvidia.com> +Description: These files show status of Unified Fabric Manager upgrade. + state. 0 - means upgrade is done, 1 - otherwise. + + The file is read only. diff --git a/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks new file mode 100644 index 000000000000..825508f42af6 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-kernel-time-aux-clocks @@ -0,0 +1,5 @@ +What: /sys/kernel/time/aux_clocks/<ID>/enable +Date: May 2025 +Contact: Thomas Gleixner <tglx@linutronix.de> +Description: + Controls the enablement of auxiliary clock timekeepers. |