diff options
Diffstat (limited to 'Documentation/admin-guide/mm')
| -rw-r--r-- | Documentation/admin-guide/mm/damon/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/damon/stat.rst | 69 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/damon/usage.rst | 46 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/index.rst | 1 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/slab.rst | 469 | ||||
| -rw-r--r-- | Documentation/admin-guide/mm/transhuge.rst | 19 |
6 files changed, 594 insertions, 11 deletions
diff --git a/Documentation/admin-guide/mm/damon/index.rst b/Documentation/admin-guide/mm/damon/index.rst index bc7e976120e0..3ce3164480c7 100644 --- a/Documentation/admin-guide/mm/damon/index.rst +++ b/Documentation/admin-guide/mm/damon/index.rst @@ -14,3 +14,4 @@ access monitoring and access-aware system operations. usage reclaim lru_sort + stat diff --git a/Documentation/admin-guide/mm/damon/stat.rst b/Documentation/admin-guide/mm/damon/stat.rst new file mode 100644 index 000000000000..4c517c2c219a --- /dev/null +++ b/Documentation/admin-guide/mm/damon/stat.rst @@ -0,0 +1,69 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=================================== +Data Access Monitoring Results Stat +=================================== + +Data Access Monitoring Results Stat (DAMON_STAT) is a static kernel module that +is aimed to be used for simple access pattern monitoring. It monitors accesses +on the system's entire physical memory using DAMON, and provides simplified +access monitoring results statistics, namely idle time percentiles and +estimated memory bandwidth. + +Monitoring Accuracy and Overhead +================================ + +DAMON_STAT uses monitoring intervals :ref:`auto-tuning +<damon_design_monitoring_intervals_autotuning>` to make its accuracy high and +overhead minimum. It auto-tunes the intervals aiming 4 % of observable access +events to be captured in each snapshot, while limiting the resulting sampling +events to be 5 milliseconds in minimum and 10 seconds in maximum. On a few +production server systems, it resulted in consuming only 0.x % single CPU time, +while capturing reasonable quality of access patterns. + +Interface: Module Parameters +============================ + +To use this feature, you should first ensure your system is running on a kernel +that is built with ``CONFIG_DAMON_STAT=y``. The feature can be enabled by +default at build time, by setting ``CONFIG_DAMON_STAT_ENABLED_DEFAULT`` true. + +To let sysadmins enable or disable it at boot and/or runtime, and read the +monitoring results, DAMON_STAT provides module parameters. Following +sections are descriptions of the parameters. + +enabled +------- + +Enable or disable DAMON_STAT. + +You can enable DAMON_STAT by setting the value of this parameter as ``Y``. +Setting it as ``N`` disables DAMON_STAT. The default value is set by +``CONFIG_DAMON_STAT_ENABLED_DEFAULT`` build config option. + +estimated_memory_bandwidth +-------------------------- + +Estimated memory bandwidth consumption (bytes per second) of the system. + +DAMON_STAT reads observed access events on the current DAMON results snapshot +and converts it to memory bandwidth consumption estimation in bytes per second. +The resulting metric is exposed to user via this read-only parameter. Because +DAMON uses sampling, this is only an estimation of the access intensity rather +than accurate memory bandwidth. + +memory_idle_ms_percentiles +-------------------------- + +Per-byte idle time (milliseconds) percentiles of the system. + +DAMON_STAT calculates how long each byte of the memory was not accessed until +now (idle time), based on the current DAMON results snapshot. If DAMON found a +region of access frequency (nr_accesses) larger than zero, every byte of the +region gets zero idle time. If a region has zero access frequency +(nr_accesses), how long the region was keeping the zero access frequency (age) +becomes the idle time of every byte of the region. Then, DAMON_STAT exposes +the percentiles of the idle time values via this read-only parameter. Reading +the parameter returns 101 idle time values in milliseconds, separated by comma. +Each value represents 0-th, 1st, 2nd, 3rd, ..., 99th and 100th percentile idle +times. diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index d960aba72b82..ff3a2dda1f02 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -59,7 +59,7 @@ comma (","). :ref:`/sys/kernel/mm/damon <sysfs_root>`/admin │ :ref:`kdamonds <sysfs_kdamonds>`/nr_kdamonds - │ │ :ref:`0 <sysfs_kdamond>`/state,pid + │ │ :ref:`0 <sysfs_kdamond>`/state,pid,refresh_ms │ │ │ :ref:`contexts <sysfs_contexts>`/nr_contexts │ │ │ │ :ref:`0 <sysfs_context>`/avail_operations,operations │ │ │ │ │ :ref:`monitoring_attrs <sysfs_monitoring_attrs>`/ @@ -85,6 +85,8 @@ comma (","). │ │ │ │ │ │ │ :ref:`watermarks <sysfs_watermarks>`/metric,interval_us,high,mid,low │ │ │ │ │ │ │ :ref:`{core_,ops_,}filters <sysfs_filters>`/nr_filters │ │ │ │ │ │ │ │ 0/type,matching,allow,memcg_path,addr_start,addr_end,target_idx,min,max + │ │ │ │ │ │ │ :ref:`dests <damon_sysfs_dests>`/nr_dests + │ │ │ │ │ │ │ │ 0/id,weight │ │ │ │ │ │ │ :ref:`stats <sysfs_schemes_stats>`/nr_tried,sz_tried,nr_applied,sz_applied,sz_ops_filter_passed,qt_exceeds │ │ │ │ │ │ │ :ref:`tried_regions <sysfs_schemes_tried_regions>`/total_bytes │ │ │ │ │ │ │ │ 0/start,end,nr_accesses,age,sz_filter_passed @@ -121,8 +123,8 @@ kdamond. kdamonds/<N>/ ------------- -In each kdamond directory, two files (``state`` and ``pid``) and one directory -(``contexts``) exist. +In each kdamond directory, three files (``state``, ``pid`` and ``refresh_ms``) +and one directory (``contexts``) exist. Reading ``state`` returns ``on`` if the kdamond is currently running, or ``off`` if it is not running. @@ -159,6 +161,13 @@ Users can write below commands for the kdamond to the ``state`` file. If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread. +Users can ask the kernel to periodically update files showing auto-tuned +parameters and DAMOS stats instead of manually writing +``update_tuned_intervals`` like keywords to ``state`` file. For this, users +should write the desired update time interval in milliseconds to ``refresh_ms`` +file. If the interval is zero, the periodic update is disabled. Reading the +file shows currently set time interval. + ``contexts`` directory contains files for controlling the monitoring contexts that this kdamond will execute. @@ -307,10 +316,10 @@ to ``N-1``. Each directory represents each DAMON-based operation scheme. schemes/<N>/ ------------ -In each scheme directory, seven directories (``access_pattern``, ``quotas``, -``watermarks``, ``core_filters``, ``ops_filters``, ``filters``, ``stats``, and -``tried_regions``) and three files (``action``, ``target_nid`` and -``apply_interval``) exist. +In each scheme directory, eight directories (``access_pattern``, ``quotas``, +``watermarks``, ``core_filters``, ``ops_filters``, ``filters``, ``dests``, +``stats``, and ``tried_regions``) and three files (``action``, ``target_nid`` +and ``apply_interval``) exist. The ``action`` file is for setting and getting the scheme's :ref:`action <damon_design_damos_action>`. The keywords that can be written to and read @@ -484,6 +493,29 @@ Refer to the :ref:`DAMOS filters design documentation of different ``allow`` works, when each of the filters are supported, and differences on stats. +.. _damon_sysfs_dests: + +schemes/<N>/dests/ +------------------ + +Directory for specifying the destinations of given DAMON-based operation +scheme's action. This directory is ignored if the action of the given scheme +is not supporting multiple destinations. Only ``DAMOS_MIGRATE_{HOT,COLD}`` +actions are supporting multiple destinations. + +In the beginning, the directory has only one file, ``nr_dests``. Writing a +number (``N``) to the file creates the number of child directories named ``0`` +to ``N-1``. Each directory represents each action destination. + +Each destination directory contains two files, namely ``id`` and ``weight``. +Users can write and read the identifier of the destination to ``id`` file. +For ``DAMOS_MIGRATE_{HOT,COLD}`` actions, the migrate destination node's node +id should be written to ``id`` file. Users can write and read the weight of +the destination among the given destinations to the ``weight`` file. The +weight can be an arbitrary integer. When DAMOS apply the action to each entity +of the memory region, it will select the destination of the action based on the +relative weights of the destinations. + .. _sysfs_schemes_stats: schemes/<N>/stats/ diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst index 2d2f6c222308..ebc83ca20fdc 100644 --- a/Documentation/admin-guide/mm/index.rst +++ b/Documentation/admin-guide/mm/index.rst @@ -37,6 +37,7 @@ the Linux memory management. numaperf pagemap shrinker_debugfs + slab soft-dirty swap_numa transhuge diff --git a/Documentation/admin-guide/mm/slab.rst b/Documentation/admin-guide/mm/slab.rst new file mode 100644 index 000000000000..14429ab90611 --- /dev/null +++ b/Documentation/admin-guide/mm/slab.rst @@ -0,0 +1,469 @@ +======================================== +Short users guide for the slab allocator +======================================== + +The slab allocator includes full debugging support (when built with +CONFIG_SLUB_DEBUG=y) but it is off by default (unless built with +CONFIG_SLUB_DEBUG_ON=y). You can enable debugging only for selected +slabs in order to avoid an impact on overall system performance which +may make a bug more difficult to find. + +In order to switch debugging on one can add an option ``slab_debug`` +to the kernel command line. That will enable full debugging for +all slabs. + +Typically one would then use the ``slabinfo`` command to get statistical +data and perform operation on the slabs. By default ``slabinfo`` only lists +slabs that have data in them. See "slabinfo -h" for more options when +running the command. ``slabinfo`` can be compiled with +:: + + gcc -o slabinfo tools/mm/slabinfo.c + +Some of the modes of operation of ``slabinfo`` require that slub debugging +be enabled on the command line. F.e. no tracking information will be +available without debugging on and validation can only partially +be performed if debugging was not switched on. + +Some more sophisticated uses of slab_debug: +------------------------------------------- + +Parameters may be given to ``slab_debug``. If none is specified then full +debugging is enabled. Format: + +slab_debug=<Debug-Options> + Enable options for all slabs + +slab_debug=<Debug-Options>,<slab name1>,<slab name2>,... + Enable options only for select slabs (no spaces + after a comma) + +Multiple blocks of options for all slabs or selected slabs can be given, with +blocks of options delimited by ';'. The last of "all slabs" blocks is applied +to all slabs except those that match one of the "select slabs" block. Options +of the first "select slabs" blocks that matches the slab's name are applied. + +Possible debug options are:: + + F Sanity checks on (enables SLAB_DEBUG_CONSISTENCY_CHECKS + Sorry SLAB legacy issues) + Z Red zoning + P Poisoning (object and padding) + U User tracking (free and alloc) + T Trace (please only use on single slabs) + A Enable failslab filter mark for the cache + O Switch debugging off for caches that would have + caused higher minimum slab orders + - Switch all debugging off (useful if the kernel is + configured with CONFIG_SLUB_DEBUG_ON) + +F.e. in order to boot just with sanity checks and red zoning one would specify:: + + slab_debug=FZ + +Trying to find an issue in the dentry cache? Try:: + + slab_debug=,dentry + +to only enable debugging on the dentry cache. You may use an asterisk at the +end of the slab name, in order to cover all slabs with the same prefix. For +example, here's how you can poison the dentry cache as well as all kmalloc +slabs:: + + slab_debug=P,kmalloc-*,dentry + +Red zoning and tracking may realign the slab. We can just apply sanity checks +to the dentry cache with:: + + slab_debug=F,dentry + +Debugging options may require the minimum possible slab order to increase as +a result of storing the metadata (for example, caches with PAGE_SIZE object +sizes). This has a higher likelihood of resulting in slab allocation errors +in low memory situations or if there's high fragmentation of memory. To +switch off debugging for such caches by default, use:: + + slab_debug=O + +You can apply different options to different list of slab names, using blocks +of options. This will enable red zoning for dentry and user tracking for +kmalloc. All other slabs will not get any debugging enabled:: + + slab_debug=Z,dentry;U,kmalloc-* + +You can also enable options (e.g. sanity checks and poisoning) for all caches +except some that are deemed too performance critical and don't need to be +debugged by specifying global debug options followed by a list of slab names +with "-" as options:: + + slab_debug=FZ;-,zs_handle,zspage + +The state of each debug option for a slab can be found in the respective files +under:: + + /sys/kernel/slab/<slab name>/ + +If the file contains 1, the option is enabled, 0 means disabled. The debug +options from the ``slab_debug`` parameter translate to the following files:: + + F sanity_checks + Z red_zone + P poison + U store_user + T trace + A failslab + +failslab file is writable, so writing 1 or 0 will enable or disable +the option at runtime. Write returns -EINVAL if cache is an alias. +Careful with tracing: It may spew out lots of information and never stop if +used on the wrong slab. + +Slab merging +============ + +If no debug options are specified then SLUB may merge similar slabs together +in order to reduce overhead and increase cache hotness of objects. +``slabinfo -a`` displays which slabs were merged together. + +Slab validation +=============== + +SLUB can validate all object if the kernel was booted with slab_debug. In +order to do so you must have the ``slabinfo`` tool. Then you can do +:: + + slabinfo -v + +which will test all objects. Output will be generated to the syslog. + +This also works in a more limited way if boot was without slab debug. +In that case ``slabinfo -v`` simply tests all reachable objects. Usually +these are in the cpu slabs and the partial slabs. Full slabs are not +tracked by SLUB in a non debug situation. + +Getting more performance +======================== + +To some degree SLUB's performance is limited by the need to take the +list_lock once in a while to deal with partial slabs. That overhead is +governed by the order of the allocation for each slab. The allocations +can be influenced by kernel parameters: + +.. slab_min_objects=x (default: automatically scaled by number of cpus) +.. slab_min_order=x (default 0) +.. slab_max_order=x (default 3 (PAGE_ALLOC_COSTLY_ORDER)) + +``slab_min_objects`` + allows to specify how many objects must at least fit into one + slab in order for the allocation order to be acceptable. In + general slub will be able to perform this number of + allocations on a slab without consulting centralized resources + (list_lock) where contention may occur. + +``slab_min_order`` + specifies a minimum order of slabs. A similar effect like + ``slab_min_objects``. + +``slab_max_order`` + specified the order at which ``slab_min_objects`` should no + longer be checked. This is useful to avoid SLUB trying to + generate super large order pages to fit ``slab_min_objects`` + of a slab cache with large object sizes into one high order + page. Setting command line parameter + ``debug_guardpage_minorder=N`` (N > 0), forces setting + ``slab_max_order`` to 0, what cause minimum possible order of + slabs allocation. + +``slab_strict_numa`` + Enables the application of memory policies on each + allocation. This results in more accurate placement of + objects which may result in the reduction of accesses + to remote nodes. The default is to only apply memory + policies at the folio level when a new folio is acquired + or a folio is retrieved from the lists. Enabling this + option reduces the fastpath performance of the slab allocator. + +SLUB Debug output +================= + +Here is a sample of slub debug output:: + + ==================================================================== + BUG kmalloc-8: Right Redzone overwritten + -------------------------------------------------------------------- + + INFO: 0xc90f6d28-0xc90f6d2b. First byte 0x00 instead of 0xcc + INFO: Slab 0xc528c530 flags=0x400000c3 inuse=61 fp=0xc90f6d58 + INFO: Object 0xc90f6d20 @offset=3360 fp=0xc90f6d58 + INFO: Allocated in get_modalias+0x61/0xf5 age=53 cpu=1 pid=554 + + Bytes b4 (0xc90f6d10): 00 00 00 00 00 00 00 00 5a 5a 5a 5a 5a 5a 5a 5a ........ZZZZZZZZ + Object (0xc90f6d20): 31 30 31 39 2e 30 30 35 1019.005 + Redzone (0xc90f6d28): 00 cc cc cc . + Padding (0xc90f6d50): 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ + + [<c010523d>] dump_trace+0x63/0x1eb + [<c01053df>] show_trace_log_lvl+0x1a/0x2f + [<c010601d>] show_trace+0x12/0x14 + [<c0106035>] dump_stack+0x16/0x18 + [<c017e0fa>] object_err+0x143/0x14b + [<c017e2cc>] check_object+0x66/0x234 + [<c017eb43>] __slab_free+0x239/0x384 + [<c017f446>] kfree+0xa6/0xc6 + [<c02e2335>] get_modalias+0xb9/0xf5 + [<c02e23b7>] dmi_dev_uevent+0x27/0x3c + [<c027866a>] dev_uevent+0x1ad/0x1da + [<c0205024>] kobject_uevent_env+0x20a/0x45b + [<c020527f>] kobject_uevent+0xa/0xf + [<c02779f1>] store_uevent+0x4f/0x58 + [<c027758e>] dev_attr_store+0x29/0x2f + [<c01bec4f>] sysfs_write_file+0x16e/0x19c + [<c0183ba7>] vfs_write+0xd1/0x15a + [<c01841d7>] sys_write+0x3d/0x72 + [<c0104112>] sysenter_past_esp+0x5f/0x99 + [<b7f7b410>] 0xb7f7b410 + ======================= + + FIX kmalloc-8: Restoring Redzone 0xc90f6d28-0xc90f6d2b=0xcc + +If SLUB encounters a corrupted object (full detection requires the kernel +to be booted with slab_debug) then the following output will be dumped +into the syslog: + +1. Description of the problem encountered + + This will be a message in the system log starting with:: + + =============================================== + BUG <slab cache affected>: <What went wrong> + ----------------------------------------------- + + INFO: <corruption start>-<corruption_end> <more info> + INFO: Slab <address> <slab information> + INFO: Object <address> <object information> + INFO: Allocated in <kernel function> age=<jiffies since alloc> cpu=<allocated by + cpu> pid=<pid of the process> + INFO: Freed in <kernel function> age=<jiffies since free> cpu=<freed by cpu> + pid=<pid of the process> + + (Object allocation / free information is only available if SLAB_STORE_USER is + set for the slab. slab_debug sets that option) + +2. The object contents if an object was involved. + + Various types of lines can follow the BUG SLUB line: + + Bytes b4 <address> : <bytes> + Shows a few bytes before the object where the problem was detected. + Can be useful if the corruption does not stop with the start of the + object. + + Object <address> : <bytes> + The bytes of the object. If the object is inactive then the bytes + typically contain poison values. Any non-poison value shows a + corruption by a write after free. + + Redzone <address> : <bytes> + The Redzone following the object. The Redzone is used to detect + writes after the object. All bytes should always have the same + value. If there is any deviation then it is due to a write after + the object boundary. + + (Redzone information is only available if SLAB_RED_ZONE is set. + slab_debug sets that option) + + Padding <address> : <bytes> + Unused data to fill up the space in order to get the next object + properly aligned. In the debug case we make sure that there are + at least 4 bytes of padding. This allows the detection of writes + before the object. + +3. A stackdump + + The stackdump describes the location where the error was detected. The cause + of the corruption is may be more likely found by looking at the function that + allocated or freed the object. + +4. Report on how the problem was dealt with in order to ensure the continued + operation of the system. + + These are messages in the system log beginning with:: + + FIX <slab cache affected>: <corrective action taken> + + In the above sample SLUB found that the Redzone of an active object has + been overwritten. Here a string of 8 characters was written into a slab that + has the length of 8 characters. However, a 8 character string needs a + terminating 0. That zero has overwritten the first byte of the Redzone field. + After reporting the details of the issue encountered the FIX SLUB message + tells us that SLUB has restored the Redzone to its proper value and then + system operations continue. + +Emergency operations +==================== + +Minimal debugging (sanity checks alone) can be enabled by booting with:: + + slab_debug=F + +This will be generally be enough to enable the resiliency features of slub +which will keep the system running even if a bad kernel component will +keep corrupting objects. This may be important for production systems. +Performance will be impacted by the sanity checks and there will be a +continual stream of error messages to the syslog but no additional memory +will be used (unlike full debugging). + +No guarantees. The kernel component still needs to be fixed. Performance +may be optimized further by locating the slab that experiences corruption +and enabling debugging only for that cache + +I.e.:: + + slab_debug=F,dentry + +If the corruption occurs by writing after the end of the object then it +may be advisable to enable a Redzone to avoid corrupting the beginning +of other objects:: + + slab_debug=FZ,dentry + +Extended slabinfo mode and plotting +=================================== + +The ``slabinfo`` tool has a special 'extended' ('-X') mode that includes: + - Slabcache Totals + - Slabs sorted by size (up to -N <num> slabs, default 1) + - Slabs sorted by loss (up to -N <num> slabs, default 1) + +Additionally, in this mode ``slabinfo`` does not dynamically scale +sizes (G/M/K) and reports everything in bytes (this functionality is +also available to other slabinfo modes via '-B' option) which makes +reporting more precise and accurate. Moreover, in some sense the `-X' +mode also simplifies the analysis of slabs' behaviour, because its +output can be plotted using the ``slabinfo-gnuplot.sh`` script. So it +pushes the analysis from looking through the numbers (tons of numbers) +to something easier -- visual analysis. + +To generate plots: + +a) collect slabinfo extended records, for example:: + + while [ 1 ]; do slabinfo -X >> FOO_STATS; sleep 1; done + +b) pass stats file(-s) to ``slabinfo-gnuplot.sh`` script:: + + slabinfo-gnuplot.sh FOO_STATS [FOO_STATS2 .. FOO_STATSN] + + The ``slabinfo-gnuplot.sh`` script will pre-processes the collected records + and generates 3 png files (and 3 pre-processing cache files) per STATS + file: + - Slabcache Totals: FOO_STATS-totals.png + - Slabs sorted by size: FOO_STATS-slabs-by-size.png + - Slabs sorted by loss: FOO_STATS-slabs-by-loss.png + +Another use case, when ``slabinfo-gnuplot.sh`` can be useful, is when you +need to compare slabs' behaviour "prior to" and "after" some code +modification. To help you out there, ``slabinfo-gnuplot.sh`` script +can 'merge' the `Slabcache Totals` sections from different +measurements. To visually compare N plots: + +a) Collect as many STATS1, STATS2, .. STATSN files as you need:: + + while [ 1 ]; do slabinfo -X >> STATS<X>; sleep 1; done + +b) Pre-process those STATS files:: + + slabinfo-gnuplot.sh STATS1 STATS2 .. STATSN + +c) Execute ``slabinfo-gnuplot.sh`` in '-t' mode, passing all of the + generated pre-processed \*-totals:: + + slabinfo-gnuplot.sh -t STATS1-totals STATS2-totals .. STATSN-totals + + This will produce a single plot (png file). + + Plots, expectedly, can be large so some fluctuations or small spikes + can go unnoticed. To deal with that, ``slabinfo-gnuplot.sh`` has two + options to 'zoom-in'/'zoom-out': + + a) ``-s %d,%d`` -- overwrites the default image width and height + b) ``-r %d,%d`` -- specifies a range of samples to use (for example, + in ``slabinfo -X >> FOO_STATS; sleep 1;`` case, using a ``-r + 40,60`` range will plot only samples collected between 40th and + 60th seconds). + + +DebugFS files for SLUB +====================== + +For more information about current state of SLUB caches with the user tracking +debug option enabled, debugfs files are available, typically under +/sys/kernel/debug/slab/<cache>/ (created only for caches with enabled user +tracking). There are 2 types of these files with the following debug +information: + +1. alloc_traces:: + + Prints information about unique allocation traces of the currently + allocated objects. The output is sorted by frequency of each trace. + + Information in the output: + Number of objects, allocating function, possible memory wastage of + kmalloc objects(total/per-object), minimal/average/maximal jiffies + since alloc, pid range of the allocating processes, cpu mask of + allocating cpus, numa node mask of origins of memory, and stack trace. + + Example::: + + 338 pci_alloc_dev+0x2c/0xa0 waste=521872/1544 age=290837/291891/293509 pid=1 cpus=106 nodes=0-1 + __kmem_cache_alloc_node+0x11f/0x4e0 + kmalloc_trace+0x26/0xa0 + pci_alloc_dev+0x2c/0xa0 + pci_scan_single_device+0xd2/0x150 + pci_scan_slot+0xf7/0x2d0 + pci_scan_child_bus_extend+0x4e/0x360 + acpi_pci_root_create+0x32e/0x3b0 + pci_acpi_scan_root+0x2b9/0x2d0 + acpi_pci_root_add.cold.11+0x110/0xb0a + acpi_bus_attach+0x262/0x3f0 + device_for_each_child+0xb7/0x110 + acpi_dev_for_each_child+0x77/0xa0 + acpi_bus_attach+0x108/0x3f0 + device_for_each_child+0xb7/0x110 + acpi_dev_for_each_child+0x77/0xa0 + acpi_bus_attach+0x108/0x3f0 + +2. free_traces:: + + Prints information about unique freeing traces of the currently allocated + objects. The freeing traces thus come from the previous life-cycle of the + objects and are reported as not available for objects allocated for the first + time. The output is sorted by frequency of each trace. + + Information in the output: + Number of objects, freeing function, minimal/average/maximal jiffies since free, + pid range of the freeing processes, cpu mask of freeing cpus, and stack trace. + + Example::: + + 1980 <not-available> age=4294912290 pid=0 cpus=0 + 51 acpi_ut_update_ref_count+0x6a6/0x782 age=236886/237027/237772 pid=1 cpus=1 + kfree+0x2db/0x420 + acpi_ut_update_ref_count+0x6a6/0x782 + acpi_ut_update_object_reference+0x1ad/0x234 + acpi_ut_remove_reference+0x7d/0x84 + acpi_rs_get_prt_method_data+0x97/0xd6 + acpi_get_irq_routing_table+0x82/0xc4 + acpi_pci_irq_find_prt_entry+0x8e/0x2e0 + acpi_pci_irq_lookup+0x3a/0x1e0 + acpi_pci_irq_enable+0x77/0x240 + pcibios_enable_device+0x39/0x40 + do_pci_enable_device.part.0+0x5d/0xe0 + pci_enable_device_flags+0xfc/0x120 + pci_enable_device+0x13/0x20 + virtio_pci_probe+0x9e/0x170 + local_pci_probe+0x48/0x80 + pci_device_probe+0x105/0x1c0 + +Christoph Lameter, May 30, 2007 +Sergey Senozhatsky, October 23, 2015 diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst index dff8d5985f0f..370fba113460 100644 --- a/Documentation/admin-guide/mm/transhuge.rst +++ b/Documentation/admin-guide/mm/transhuge.rst @@ -107,7 +107,7 @@ sysfs Global THP controls ------------------- -Transparent Hugepage Support for anonymous memory can be entirely disabled +Transparent Hugepage Support for anonymous memory can be disabled (mostly for debugging purposes) or only enabled inside MADV_HUGEPAGE regions (to avoid the risk of consuming more memory resources) or enabled system wide. This can be achieved per-supported-THP-size with one of:: @@ -119,6 +119,11 @@ system wide. This can be achieved per-supported-THP-size with one of:: where <size> is the hugepage size being addressed, the available sizes for which vary by system. +.. note:: Setting "never" in all sysfs THP controls does **not** disable + Transparent Huge Pages globally. This is because ``madvise(..., + MADV_COLLAPSE)`` ignores these settings and collapses ranges to + PMD-sized huge pages unconditionally. + For example:: echo always >/sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled @@ -187,7 +192,9 @@ madvise behaviour. never - should be self-explanatory. + should be self-explanatory. Note that ``madvise(..., + MADV_COLLAPSE)`` can still cause transparent huge pages to be + obtained even if this mode is specified everywhere. By default kernel tries to use huge, PMD-mappable zero page on read page fault to anonymous mapping. It's possible to disable huge zero @@ -378,7 +385,9 @@ always Attempt to allocate huge pages every time we need a new page; never - Do not allocate huge pages; + Do not allocate huge pages. Note that ``madvise(..., MADV_COLLAPSE)`` + can still cause transparent huge pages to be obtained even if this mode + is specified everywhere; within_size Only allocate huge page if it will be fully within i_size. @@ -434,7 +443,9 @@ inherit have enabled="inherit" and all other hugepage sizes have enabled="never"; never - Do not allocate <size> huge pages; + Do not allocate <size> huge pages. Note that ``madvise(..., + MADV_COLLAPSE)`` can still cause transparent huge pages to be obtained + even if this mode is specified everywhere; within_size Only allocate <size> huge page if it will be fully within i_size. |