diff options
Diffstat (limited to 'Documentation/devicetree/bindings/display/imx')
23 files changed, 1929 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml new file mode 100644 index 000000000000..1d6501afc7f2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller AXI Performance Counter + +description: | + Performance counters are provided to allow measurement of average bandwidth + and latency during operation. The following features are supported: + + * Manual and timer controlled measurement mode. + + * Measurement counters: + - GLOBAL_COUNTER for overall measurement time + - BUSY_COUNTER for number of data bus busy cycles + - DATA_COUNTER for number of data transfer cycles + - TRANSFER_COUNTER for number of transfers + - ADDRBUSY_COUNTER for number of address bus busy cycles + - LATENCY_COUNTER for average latency + + * Counter overflow detection. + + * Outstanding Transfer Counters (OTC) which are used for latency measurement + have to run immediately after reset, but can be disabled by software when + there is no need for latency measurement. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-axi-performance-counter + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + + pmu@5618f000 { + compatible = "fsl,imx8qxp-dc-axi-performance-counter"; + reg = <0x5618f000 0x90>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blit-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blit-engine.yaml new file mode 100644 index 000000000000..45db6da39e20 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blit-engine.yaml @@ -0,0 +1,204 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blit-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Blit Engine + +description: | + A blit operation (block based image transfer) reads up to 3 source images + from memory and computes one destination image from it, which is written + back to memory. The following basic operations are supported: + + * Buffer Fill + Fills a buffer with constant color + + * Buffer Copy + Copies one source to a destination buffer. + + * Image Blend + Combines two source images by a blending equation and writes result to + destination (which can be one of the sources). + + * Image Rop2/3 + Combines up to three source images by a logical equation (raster operation) + and writes result to destination (which can be one of the sources). + + * Image Flip + Mirrors the source image in horizontal and/or vertical direction. + + * Format Convert + Convert between the supported color and buffer formats. + + * Color Transform + Modify colors by linear or non-linear transformations. + + * Image Scale + Changes size of the source image. + + * Image Rotate + Rotates the source image by any angle. + + * Image Filter + Performs an FIR filter operation on the source image. + + * Image Warp + Performs a re-sampling of the source image with any pattern. The sample + point positions are read from a compressed coordinate buffer. + + * Buffer Pack + Writes an image with color components stored in up to three different + buffers (planar formats) into a single buffer (packed format). + + * Chroma Resample + Converts between different YUV formats that differ in chroma sampling rate + (4:4:4, 4:2:2, 4:2:0). + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-blit-engine + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^blitblend@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-blitblend + + "^clut@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-clut + + "^fetchdecode@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-fetchdecode + + "^fetcheco@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-fetcheco + + "^fetchwarp@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-fetchwarp + + "^filter@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-filter + + "^hscaler@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-hscaler + + "^matrix@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-matrix + + "^rop@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-rop + + "^store@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-store + + "^vscaler@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-vscaler + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + blit-engine@56180820 { + compatible = "fsl,imx8qxp-dc-blit-engine"; + reg = <0x56180820 0x13c>, <0x56181000 0x3400>; + reg-names = "pec", "cfg"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + fetchdecode@56180820 { + compatible = "fsl,imx8qxp-dc-fetchdecode"; + reg = <0x56180820 0x10>, <0x56181000 0x404>; + reg-names = "pec", "cfg"; + }; + + store@56180940 { + compatible = "fsl,imx8qxp-dc-store"; + reg = <0x56180940 0x1c>, <0x56184000 0x5c>; + reg-names = "pec", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <0>, <1>, <2>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blitblend.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blitblend.yaml new file mode 100644 index 000000000000..095e65939fba --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blitblend.yaml @@ -0,0 +1,41 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blitblend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Blit Blend Unit + +description: + Combines two input frames to a single output frame, all frames having the + same dimension. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-blitblend + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + blitblend@56180920 { + compatible = "fsl,imx8qxp-dc-blitblend"; + reg = <0x56180920 0x10>, <0x56183c00 0x3c>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-clut.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-clut.yaml new file mode 100644 index 000000000000..21d42aa11b52 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-clut.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-clut.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Color Lookup Table + +description: | + The unit implements 3 look-up tables with 256 x 10 bit entries each. These + can be used for different kinds of applications. From 10-bit input values + only upper 8 bits are used. + + The unit supports color lookup, index lookup, dithering and alpha masking. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-clut + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + clut@56180880 { + compatible = "fsl,imx8qxp-dc-clut"; + reg = <0x56180880 0x10>, <0x56182400 0x404>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml new file mode 100644 index 000000000000..27118f4c0d28 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-command-sequencer.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Command Sequencer + +description: | + The Command Sequencer is designed to autonomously process command lists. + By that it can load setups into the DC configuration and synchronize to + hardware events. This releases a system's CPU from workload, because it + does not need to wait for certain events. Also it simplifies SW architecture, + because no interrupt handlers are required. Setups are read via AXI bus, + while write access to configuration registers occurs directly via an internal + bus. This saves bandwidth for the AXI interconnect and improves the system + architecture in terms of safety aspects. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-command-sequencer + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 5 + + interrupt-names: + items: + - const: error + - const: sw0 + - const: sw1 + - const: sw2 + - const: sw3 + + sram: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle pointing to the mmio-sram device node + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + + command-sequencer@56180400 { + compatible = "fsl,imx8qxp-dc-command-sequencer"; + reg = <0x56180400 0x1a4>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + interrupt-parent = <&dc0_intc>; + interrupts = <36>, <37>, <38>, <39>, <40>; + interrupt-names = "error", "sw0", "sw1", "sw2", "sw3"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml new file mode 100644 index 000000000000..94f678563608 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-constframe.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-constframe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Constant Frame + +description: | + The Constant Frame unit is used instead of a Fetch unit where generation of + constant color frames only is sufficient. This is the case for the background + planes of content and safety streams in a Display Controller. + + The color can be setup to any RGBA value. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-constframe + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + constframe@56180960 { + compatible = "fsl,imx8qxp-dc-constframe"; + reg = <0x56180960 0xc>, <0x56184400 0x20>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-display-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-display-engine.yaml new file mode 100644 index 000000000000..91f3bb77d8d0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-display-engine.yaml @@ -0,0 +1,152 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-display-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Display Engine + +description: + All Processing Units that operate in a display clock domain. Pixel pipeline + is driven by a video timing and cannot be stalled. Implements all display + specific processing. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-display-engine + + reg: + maxItems: 2 + + reg-names: + items: + - const: top + - const: cfg + + resets: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: shdload + - const: framecomplete + - const: seqcomplete + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^dither@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-dither + + "^framegen@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-framegen + + "^gammacor@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-gammacor + + "^matrix@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-matrix + + "^signature@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-signature + + "^tcon@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-tcon + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + display-engine@5618b400 { + compatible = "fsl,imx8qxp-dc-display-engine"; + reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>; + reg-names = "top", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <15>, <16>, <17>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + power-domains = <&pd IMX_SC_R_DC_0_PLL_0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framegen@5618b800 { + compatible = "fsl,imx8qxp-dc-framegen"; + reg = <0x5618b800 0x98>; + clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>; + interrupt-parent = <&dc0_intc>; + interrupts = <18>, <19>, <20>, <21>, <41>, <42>, <43>, <44>; + interrupt-names = "int0", "int1", "int2", "int3", + "primsync_on", "primsync_off", + "secsync_on", "secsync_off"; + }; + + tcon@5618c800 { + compatible = "fsl,imx8qxp-dc-tcon"; + reg = <0x5618c800 0x588>; + + port { + dc0_disp0_dc0_pixel_combiner_ch0: endpoint { + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-dither.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-dither.yaml new file mode 100644 index 000000000000..8e4468d91836 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-dither.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-dither.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Dither Unit + +description: | + The unit can increase the physical color resolution of a display from 5, 6, 7 + or 8 bits per RGB channel to a virtual resolution of 10 bits. The physical + resolution can be set individually for each channel. + + The resolution is increased by mixing the two physical colors that are nearest + to the virtual color code in a variable ratio either by time (temporal + dithering) or by position (spatial dithering). + + An optimized algorithm for temporal dithering minimizes noise artifacts on the + output image. + + The dither operation can be individually enabled or disabled for each pixel + using the alpha input bit. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-dither + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dither@5618c400 { + compatible = "fsl,imx8qxp-dc-dither"; + reg = <0x5618c400 0x14>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml new file mode 100644 index 000000000000..dfc2d4f94f8e --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-extdst.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-extdst.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller External Destination Interface + +description: | + The External Destination unit is the interface between the internal pixel + processing pipeline of the Pixel Engine, which is 30-bit RGB plus 8-bit Alpha, + and a Display Engine. + + It comprises the following built-in Gamma apply function. + + +------X-----------------------+ + | | ExtDst Unit | + | V | + | +-------+ | + | | Gamma | | + | +-------+ | + | | | + | V + + +------X-----------------------+ + + The output format is 24-bit RGB plus 1-bit Alpha. Conversion from 10 to 8 + bits is done by LSBit truncation. Alpha output bit is 1 for input 255, 0 + otherwise. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-extdst + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: shdload + - const: framecomplete + - const: seqcomplete + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + extdst@56180980 { + compatible = "fsl,imx8qxp-dc-extdst"; + reg = <0x56180980 0x1c>, <0x56184800 0x28>; + reg-names = "pec", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <3>, <4>, <5>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit.yaml new file mode 100644 index 000000000000..97fb6a4598d9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-fetchunit.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-fetchunit.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Fetch Unit + +description: | + The Fetch Unit is the interface between the AXI bus for source buffer access + and the internal pixel processing pipeline, which is 30-bit RGB plus 8-bit + Alpha. + + It is used to generate foreground planes in Display Controllers and source + planes in Blit Engines, and comprises the following built-in functions to + convert a wide range of frame buffer types. + + +---------X-----------------------------------------+ + | | Fetch Unit | + | V | + | +---------+ | + | | | | + | | Decode | Decompression [Decode] | + | | | | + | +---------+ | + | | | + | V | + | +---------+ | + | | Clip & | Clip Window [All] | + | | Overlay | Plane composition [Layer, Warp] | + | | | | + | +---------+ | + | | | + | V | + | +---------+ | + | | Re- | Flip/Rotate/Repl./Drop [All] | + X--> | sample | Perspective/Affine warping [Persp] | + | | | | Arbitrary warping [Warp, Persp] | + | | +---------+ | + | | | | + | | V | + | | +---------+ | + | | | | | + | | | Palette | Color Palette [Layer, Decode] | + | | | | | + | | +---------+ | + | | | | + | | V | + | | +---------+ | + | | | Extract | Raw to RGBA/YUV [All] | + | | | & | Bit width expansion [All] | + | | | Expand | | + | | +---------+ | + | | | | + | | V | + | | +---------+ | + | | | | Planar to packed | + | |->| Combine | [Decode, Warp, Persp] | + | | | | | + | | +---------+ | + | | | | + | | V | + | | +---------+ | + | | | | YUV422 to YUV444 | + | | | Chroma | [Decode, Persp] | + | | | | | + | | +---------+ | + | | | | + | | V | + | | +---------+ | + | | | | YUV to RGB | + | | | Color | [Warp, Persp, Decode, Layer] | + | | | | | + | | +---------+ | + | | | | + | | V | + | | +---------+ | + | | | | Gamma removal | + | | | Gamma | [Warp, Persp, Decode, Layer] | + | | | | | + | | +---------+ | + | | | | + | | V | + | | +---------+ | + | | | | Alpla multiply, RGB pre-multiply | + | ->| Multiply| [Warp, Persp, Decode, Layer] | + | | | | + | --------- | + | | | + | V | + | +---------+ | + | | | Bilinear filter | + | | Filter | [Warp, Persp] | + | | | | + | +---------+ | + | | | + | V | + +---------X-----------------------------------------+ + + Note that different derivatives of the Fetch Unit exist. Each implements a + specific subset only of the pipeline stages shown above. Restrictions for the + units are specified in [square brackets]. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + enum: + - fsl,imx8qxp-dc-fetchdecode + - fsl,imx8qxp-dc-fetcheco + - fsl,imx8qxp-dc-fetchlayer + - fsl,imx8qxp-dc-fetchwarp + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + + fsl,prg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Optional Prefetch Resolve Gasket associated with the Fetch Unit. + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + fetchlayer@56180ac0 { + compatible = "fsl,imx8qxp-dc-fetchlayer"; + reg = <0x56180ac0 0xc>, <0x56188400 0x404>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-filter.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-filter.yaml new file mode 100644 index 000000000000..5c54d5179ee3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-filter.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-filter.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Filter Unit + +description: | + 5x5 FIR filter with 25 programmable coefficients. + + Typical applications are image blurring, sharpening or support for edge + detection algorithms. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-filter + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + filter@56180900 { + compatible = "fsl,imx8qxp-dc-filter"; + reg = <0x56180900 0x10>, <0x56183800 0x30>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml new file mode 100644 index 000000000000..9d1dc3a9de90 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-framegen.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-framegen.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Frame Generator + +description: + The Frame Generator (FrameGen) module generates a programmable video timing + and optionally allows to synchronize the generated video timing to external + synchronization signals. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-framegen + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 8 + + interrupt-names: + items: + - const: int0 + - const: int1 + - const: int2 + - const: int3 + - const: primsync_on + - const: primsync_off + - const: secsync_on + - const: secsync_off + +required: + - compatible + - reg + - clocks + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + framegen@5618b800 { + compatible = "fsl,imx8qxp-dc-framegen"; + reg = <0x5618b800 0x98>; + clocks = <&dc0_disp_lpcg IMX_LPCG_CLK_0>; + interrupt-parent = <&dc0_intc>; + interrupts = <18>, <19>, <20>, <21>, <41>, <42>, <43>, <44>; + interrupt-names = "int0", "int1", "int2", "int3", + "primsync_on", "primsync_off", + "secsync_on", "secsync_off"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-gammacor.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-gammacor.yaml new file mode 100644 index 000000000000..25ad85742912 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-gammacor.yaml @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-gammacor.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Gamma Correction Unit + +description: The unit supports non-linear color transformation. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-gammacor + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + gammacor@5618c000 { + compatible = "fsl,imx8qxp-dc-gammacor"; + reg = <0x5618c000 0x20>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml new file mode 100644 index 000000000000..2a6ab8a0ed7f --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-layerblend.yaml @@ -0,0 +1,39 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-layerblend.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Layer Blend Unit + +description: Combines two input frames to a single output frame. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-layerblend + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + layerblend@56180ba0 { + compatible = "fsl,imx8qxp-dc-layerblend"; + reg = <0x56180ba0 0x10>, <0x5618a400 0x20>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-matrix.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-matrix.yaml new file mode 100644 index 000000000000..d773389dd0dc --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-matrix.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-matrix.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Color Matrix + +description: + The unit supports linear color transformation, alpha pre-multiply and + alpha masking. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-matrix + + reg: + minItems: 1 + maxItems: 2 + + reg-names: + oneOf: + - const: cfg # matrix in display engine + - items: # matrix in pixel engine + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + matrix@5618bc00 { + compatible = "fsl,imx8qxp-dc-matrix"; + reg = <0x5618bc00 0x3c>; + reg-names = "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml new file mode 100644 index 000000000000..633443a6cc38 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml @@ -0,0 +1,250 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-pixel-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Pixel Engine + +description: + All Processing Units that operate in the AXI bus clock domain. Pixel + pipelines have the ability to stall when a destination is busy. Implements + all communication to memory resources and most of the image processing + functions. Interconnection of Processing Units is re-configurable. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-pixel-engine + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^blit-engine@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-blit-engine + + "^constframe@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-constframe + + "^extdst@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-extdst + + "^fetchdecode@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-fetchdecode + + "^fetcheco@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-fetcheco + + "^fetchlayer@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-fetchlayer + + "^fetchwarp@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-fetchwarp + + "^hscaler@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-hscaler + + "^layerblend@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-layerblend + + "^matrix@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-matrix + + "^safety@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-safety + + "^vscaler@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-vscaler + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + + pixel-engine@56180800 { + compatible = "fsl,imx8qxp-dc-pixel-engine"; + reg = <0x56180800 0xac00>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + constframe@56180960 { + compatible = "fsl,imx8qxp-dc-constframe"; + reg = <0x56180960 0xc>, <0x56184400 0x20>; + reg-names = "pec", "cfg"; + }; + + extdst@56180980 { + compatible = "fsl,imx8qxp-dc-extdst"; + reg = <0x56180980 0x1c>, <0x56184800 0x28>; + reg-names = "pec", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <3>, <4>, <5>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + }; + + constframe@561809a0 { + compatible = "fsl,imx8qxp-dc-constframe"; + reg = <0x561809a0 0xc>, <0x56184c00 0x20>; + reg-names = "pec", "cfg"; + }; + + extdst@561809c0 { + compatible = "fsl,imx8qxp-dc-extdst"; + reg = <0x561809c0 0x1c>, <0x56185000 0x28>; + reg-names = "pec", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <6>, <7>, <8>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + }; + + constframe@561809e0 { + compatible = "fsl,imx8qxp-dc-constframe"; + reg = <0x561809e0 0xc>, <0x56185400 0x20>; + reg-names = "pec", "cfg"; + }; + + extdst@56180a00 { + compatible = "fsl,imx8qxp-dc-extdst"; + reg = <0x56180a00 0x1c>, <0x56185800 0x28>; + reg-names = "pec", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <9>, <10>, <11>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + }; + + constframe@56180a20 { + compatible = "fsl,imx8qxp-dc-constframe"; + reg = <0x56180a20 0xc>, <0x56185c00 0x20>; + reg-names = "pec", "cfg"; + }; + + extdst@56180a40 { + compatible = "fsl,imx8qxp-dc-extdst"; + reg = <0x56180a40 0x1c>, <0x56186000 0x28>; + reg-names = "pec", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <12>, <13>, <14>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + }; + + fetchwarp@56180a60 { + compatible = "fsl,imx8qxp-dc-fetchwarp"; + reg = <0x56180a60 0x10>, <0x56186400 0x190>; + reg-names = "pec", "cfg"; + }; + + fetchlayer@56180ac0 { + compatible = "fsl,imx8qxp-dc-fetchlayer"; + reg = <0x56180ac0 0xc>, <0x56188400 0x404>; + reg-names = "pec", "cfg"; + }; + + layerblend@56180ba0 { + compatible = "fsl,imx8qxp-dc-layerblend"; + reg = <0x56180ba0 0x10>, <0x5618a400 0x20>; + reg-names = "pec", "cfg"; + }; + + layerblend@56180bc0 { + compatible = "fsl,imx8qxp-dc-layerblend"; + reg = <0x56180bc0 0x10>, <0x5618a800 0x20>; + reg-names = "pec", "cfg"; + }; + + layerblend@56180be0 { + compatible = "fsl,imx8qxp-dc-layerblend"; + reg = <0x56180be0 0x10>, <0x5618ac00 0x20>; + reg-names = "pec", "cfg"; + }; + + layerblend@56180c00 { + compatible = "fsl,imx8qxp-dc-layerblend"; + reg = <0x56180c00 0x10>, <0x5618b000 0x20>; + reg-names = "pec", "cfg"; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-rop.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-rop.yaml new file mode 100644 index 000000000000..7115950ecae0 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-rop.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-rop.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Raster Operation Unit + +description: | + The unit can combine up to three input frames to a single output frame, all + having the same dimension. + + The unit supports logic operations, arithmetic operations and packing. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-rop + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + rop@56180860 { + compatible = "fsl,imx8qxp-dc-rop"; + reg = <0x56180860 0x10>, <0x56182000 0x20>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-safety.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-safety.yaml new file mode 100644 index 000000000000..66c12948ab09 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-safety.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-safety.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Safety Unit + +description: + The unit allows corresponding processing units to be configured in a path + leading to multiple endpoints. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-safety + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + safety@56180800 { + compatible = "fsl,imx8qxp-dc-safety"; + reg = <0x56180800 0x1c>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml new file mode 100644 index 000000000000..76cbe11a6364 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-scaling-engine.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Scaling Engine + +description: | + The unit can change the dimension of the input frame by nearest or linear + re-sampling with 1/32 sub pixel precision. + + Internally it consist of two independent blocks for horizontal and vertical + scaling. The sequence of both operations is arbitrary. + + Any frame dimensions between 1 and 16384 pixels in width and height are + supported, except that the vertical scaler has a frame width maximum + depending of the system's functional limitations. + + In general all scale factors are supported inside the supported frame + dimensions. In range of scale factors 1/16..16 the filtered output colors + are LSBit precise (e.g. DC ripple free). + + +-----------+ + | Line | + | Buffer | + +-----------+ + ^ + | + V + |\ +-----------+ + ------+ | | | + | | +-->| Vertical |---- + | ----+ | | Scaler | | + | | |/ +-----------+ | + | | | + | | | + | | | |\ + | ------------- -------------+-----+ | + Input --+ X | +--> Output + | ------------- -------------+-----+ | + | | | |/ + | | | + | | |\ +-----------+ | + | ----+ | | | | + | | +-->| Horizontal|---- + ------+ | | Scaler | + |/ +-----------+ + + The unit supports downscaling, upscaling, sub pixel translation and bob + de-interlacing. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + enum: + - fsl,imx8qxp-dc-hscaler + - fsl,imx8qxp-dc-vscaler + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + hscaler@561808c0 { + compatible = "fsl,imx8qxp-dc-hscaler"; + reg = <0x561808c0 0x10>, <0x56183000 0x18>; + reg-names = "pec", "cfg"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-signature.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-signature.yaml new file mode 100644 index 000000000000..c495822fdc80 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-signature.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-signature.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Signature Unit + +description: | + In order to control the correctness of display output, signature values can + be computed for each frame and compared against reference values. In case of + a mismatch (signature violation) a HW event can be triggered, for example a + SW interrupt. + + This unit supports signature computation, reference check, evaluation windows, + alpha masking and panic modes. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-signature + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: shdload + - const: valid + - const: error + +required: + - compatible + - reg + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + signature@5618d000 { + compatible = "fsl,imx8qxp-dc-signature"; + reg = <0x5618d000 0x140>; + interrupt-parent = <&dc0_intc>; + interrupts = <22>, <23>, <24>; + interrupt-names = "shdload", "valid", "error"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-store.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-store.yaml new file mode 100644 index 000000000000..42d1b10906be --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-store.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-store.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Store Unit + +description: | + The Store unit is the interface between the internal pixel processing + pipeline, which is 30-bit RGB plus 8-bit Alpha, and the AXI bus for + destination buffer access. It is used for the destination of Blit Engines. + It comprises a set of built-in functions to generate a wide range of buffer + formats. Note, that these are exactly inverse to corresponding functions in + the Fetch Unit. + + +------X-------------------------+ + | | Store Unit | + | V | + | +-------+ | + | | Gamma | Gamma apply | + | +-------+ | + | | | + | V | + | +-------+ | + | | Color | RGB to YUV | + | +-------+ | + | | | + | V | + | +-------+ | + | | Chroma| YUV444 to 422 | + | +-------+ | + | | | + | V | + | +-------+ | + | | Reduce| Bit width reduction | + | | | dithering | + | +-------+ | + | | | + | V | + | +-------+ | + | | Pack | RGBA/YUV to RAW | + | | Encode| or Compression | + | +-------+ | + | | | + | V | + +------X-------------------------+ + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-store + + reg: + maxItems: 2 + + reg-names: + items: + - const: pec + - const: cfg + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: shdload + - const: framecomplete + - const: seqcomplete + + fsl,lts: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Optional Linear Tile Store associated with the Store Unit. + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + +additionalProperties: false + +examples: + - | + store@56180940 { + compatible = "fsl,imx8qxp-dc-store"; + reg = <0x56180940 0x1c>, <0x56184000 0x5c>; + reg-names = "pec", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <0>, <1>, <2>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml new file mode 100644 index 000000000000..7a3b77ea92c7 --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-tcon.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-tcon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller Timing Controller + +description: + The TCon can generate a wide range of customized synchronization signals and + does the mapping of the color bits to the output. + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc-tcon + + reg: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: video output + +required: + - compatible + - reg + - port + +additionalProperties: false + +examples: + - | + tcon@5618c800 { + compatible = "fsl,imx8qxp-dc-tcon"; + reg = <0x5618c800 0x588>; + + port { + dc0_disp0_dc0_pixel_combiner_ch0: endpoint { + remote-endpoint = <&dc0_pixel_combiner_ch0_dc0_disp0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml new file mode 100644 index 000000000000..0a72f9f0b5fd --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Display Controller + +description: | + The Freescale i.MX8qxp Display Controller(DC) is comprised of three main + components that include a blit engine for 2D graphics accelerations, display + controller for display output processing, as well as a command sequencer. + + Display buffers Source buffers + (AXI read master) (AXI read master) + | .......... | | | | + +---------------------------+------------+------------------+-+-+------+ + | Display Controller (DC) | .......... | | | | | + | | | | | | | + | @@@@@@@@@@@ +----------+------------+------------+ | | | | + A | | Command | | V V | | | | | + X <-+->| Sequencer | | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | V V V | + I | | (AXI CLK) | | | | | @@@@@@@@@@ | + | @@@@@@@@@@@ | | Pixel Engine | | | | | + | | | | (AXI CLK) | | | | | + | V | @@@@@@@@@@@@@@@@@@@@@@@@@@@@ | | | | + A | *********** | | | | | | | Blit | | + H <-+->| Configure | | V V V V | | Engine | | + B | | (CFG CLK) | | 00000000000 11111111111 | | (AXI CLK)| | + | *********** | | Display | | Display | | | | | + | | | Engine | | Engine | | | | | + | | | (Disp CLK)| | (Disp CLK)| | | | | + | @@@@@@@@@@@ | 00000000000 11111111111 | @@@@@@@@@@ | + I | | Common | | | | | | | + R <-+--| Control | | | Display | | | | + Q | | (AXI CLK) | | | Controller | | | | + | @@@@@@@@@@@ +------------------------------------+ | | + | | | ^ | | + +--------------------------+----------------+-------+---------+--------+ + ^ | | | | + | V V | V + Clocks & Resets Display Display Panic Destination + Output0 Output1 Control buffer + (AXI write master) + +maintainers: + - Liu Ying <victor.liu@nxp.com> + +properties: + compatible: + const: fsl,imx8qxp-dc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 2 + + reset-names: + items: + - const: axi + - const: cfg + + power-domains: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^command-sequencer@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-command-sequencer + + "^display-engine@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-display-engine + + "^interrupt-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-intc + + "^pixel-engine@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-pixel-engine + + "^pmu@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + const: fsl,imx8qxp-dc-axi-performance-counter + +required: + - compatible + - reg + - clocks + - power-domains + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8-lpcg.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + display-controller@56180000 { + compatible = "fsl,imx8qxp-dc"; + reg = <0x56180000 0x40000>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_4>; + power-domains = <&pd IMX_SC_R_DC_0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + interrupt-controller@56180040 { + compatible = "fsl,imx8qxp-dc-intc"; + reg = <0x56180040 0x60>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + interrupt-controller; + interrupt-parent = <&dc0_irqsteer>; + #interrupt-cells = <1>; + interrupts = <448>, <449>, <450>, <64>, + <65>, <66>, <67>, <68>, + <69>, <70>, <193>, <194>, + <195>, <196>, <197>, <72>, + <73>, <74>, <75>, <76>, + <77>, <78>, <79>, <80>, + <81>, <199>, <200>, <201>, + <202>, <203>, <204>, <205>, + <206>, <207>, <208>, <5>, + <0>, <1>, <2>, <3>, + <4>, <82>, <83>, <84>, + <85>, <209>, <210>, <211>, + <212>; + interrupt-names = "store9_shdload", + "store9_framecomplete", + "store9_seqcomplete", + "extdst0_shdload", + "extdst0_framecomplete", + "extdst0_seqcomplete", + "extdst4_shdload", + "extdst4_framecomplete", + "extdst4_seqcomplete", + "extdst1_shdload", + "extdst1_framecomplete", + "extdst1_seqcomplete", + "extdst5_shdload", + "extdst5_framecomplete", + "extdst5_seqcomplete", + "disengcfg_shdload0", + "disengcfg_framecomplete0", + "disengcfg_seqcomplete0", + "framegen0_int0", + "framegen0_int1", + "framegen0_int2", + "framegen0_int3", + "sig0_shdload", + "sig0_valid", + "sig0_error", + "disengcfg_shdload1", + "disengcfg_framecomplete1", + "disengcfg_seqcomplete1", + "framegen1_int0", + "framegen1_int1", + "framegen1_int2", + "framegen1_int3", + "sig1_shdload", + "sig1_valid", + "sig1_error", + "reserved", + "cmdseq_error", + "comctrl_sw0", + "comctrl_sw1", + "comctrl_sw2", + "comctrl_sw3", + "framegen0_primsync_on", + "framegen0_primsync_off", + "framegen0_secsync_on", + "framegen0_secsync_off", + "framegen1_primsync_on", + "framegen1_primsync_off", + "framegen1_secsync_on", + "framegen1_secsync_off"; + }; + + pixel-engine@56180800 { + compatible = "fsl,imx8qxp-dc-pixel-engine"; + reg = <0x56180800 0xac00>; + clocks = <&dc0_lpcg IMX_LPCG_CLK_5>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + + display-engine@5618b400 { + compatible = "fsl,imx8qxp-dc-display-engine"; + reg = <0x5618b400 0x14>, <0x5618b800 0x1c00>; + reg-names = "top", "cfg"; + interrupt-parent = <&dc0_intc>; + interrupts = <15>, <16>, <17>; + interrupt-names = "shdload", "framecomplete", "seqcomplete"; + power-domains = <&pd IMX_SC_R_DC_0_PLL_0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + }; + }; |