diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt')
-rw-r--r-- | Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt | 49 |
1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt b/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt deleted file mode 100644 index dd031fc93b55..000000000000 --- a/Documentation/devicetree/bindings/gpio/microchip,pic32-gpio.txt +++ /dev/null @@ -1,49 +0,0 @@ -* Microchip PIC32 GPIO devices (PIO). - -Required properties: - - compatible: "microchip,pic32mzda-gpio" - - reg: Base address and length for the device. - - interrupts: The port interrupt shared by all pins. - - gpio-controller: Marks the port as GPIO controller. - - #gpio-cells: Two. The first cell is the pin number and - the second cell is used to specify the gpio polarity as defined in - defined in <dt-bindings/gpio/gpio.h>: - 0 = GPIO_ACTIVE_HIGH - 1 = GPIO_ACTIVE_LOW - 2 = GPIO_OPEN_DRAIN - - interrupt-controller: Marks the device node as an interrupt controller. - - #interrupt-cells: Two. The first cell is the GPIO number and second cell - is used to specify the trigger type as defined in - <dt-bindings/interrupt-controller/irq.h>: - IRQ_TYPE_EDGE_RISING - IRQ_TYPE_EDGE_FALLING - IRQ_TYPE_EDGE_BOTH - - clocks: Clock specifier (see clock bindings for details). - - microchip,gpio-bank: Specifies which bank a controller owns. - - gpio-ranges: Interaction with the PINCTRL subsystem. - -Example: - -/* PORTA */ -gpio0: gpio0@1f860000 { - compatible = "microchip,pic32mzda-gpio"; - reg = <0x1f860000 0x100>; - interrupts = <118 IRQ_TYPE_LEVEL_HIGH>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - clocks = <&rootclk PB4CLK>; - microchip,gpio-bank = <0>; - gpio-ranges = <&pic32_pinctrl 0 0 16>; -}; - -keys { - ... - - button@sw1 { - label = "ESC"; - linux,code = <1>; - gpios = <&gpio0 12 0>; - }; -}; |