1 files changed, 0 insertions, 127 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
deleted file mode 100644
index 22b77ee02f58..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
+++ /dev/null
@@ -1,127 +0,0 @@
-* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller
-
-Required properties:
-
-- compatible:		Must be "arm,primecell" and exactly one from
-			"arm,pl172", "arm,pl175" or "arm,pl176".
-
-- reg:			Must contains offset/length value for controller.
-
-- #address-cells:	Must be 2. The partition number has to be encoded in the
-			first address cell and it may accept values 0..N-1
-			(N - total number of partitions). The second cell is the
-			offset into the partition.
-
-- #size-cells:		Must be set to 1.
-
-- ranges:		Must contain one or more chip select memory regions.
-
-- clocks:		Must contain references to controller clocks.
-
-- clock-names:		Must contain "mpmcclk" and "apb_pclk".
-
-- clock-ranges:		Empty property indicating that child nodes can inherit
-			named clocks. Required only if clock tree data present
-			in device tree.
-			See clock-bindings.txt
-
-Child chip-select (cs) nodes contain the memory devices nodes connected to
-such as NOR (e.g. cfi-flash) and NAND.
-
-Required child cs node properties:
-
-- #address-cells:	Must be 2.
-
-- #size-cells:		Must be 1.
-
-- ranges:		Empty property indicating that child nodes can inherit
-			memory layout.
-
-- clock-ranges:		Empty property indicating that child nodes can inherit
-			named clocks. Required only if clock tree data present
-			in device tree.
-
-- mpmc,cs:		Chip select number. Indicates to the pl0172 driver
-			which chipselect is used for accessing the memory.
-
-- mpmc,memory-width:	Width of the chip select memory. Must be equal to
-			either 8, 16 or 32.
-
-Optional child cs node config properties:
-
-- mpmc,async-page-mode:	Enable asynchronous page mode.
-
-- mpmc,cs-active-high:	Set chip select polarity to active high.
-
-- mpmc,byte-lane-low:	Set byte lane state to low.
-
-- mpmc,extended-wait:	Enable extended wait.
-
-- mpmc,buffer-enable:	Enable write buffer, option is not supported by
-			PL175 and PL176 controllers.
-
-- mpmc,write-protect:	Enable write protect.
-
-Optional child cs node timing properties:
-
-- mpmc,write-enable-delay:	Delay from chip select assertion to write
-				enable (WE signal) in nano seconds.
-
-- mpmc,output-enable-delay:	Delay from chip select assertion to output
-				enable (OE signal) in nano seconds.
-
-- mpmc,write-access-delay:	Delay from chip select assertion to write
-				access in nano seconds.
-
-- mpmc,read-access-delay:	Delay from chip select assertion to read
-				access in nano seconds.
-
-- mpmc,page-mode-read-delay:	Delay for asynchronous page mode sequential
-				accesses in nano seconds.
-
-- mpmc,turn-round-delay:	Delay between access to memory banks in nano
-				seconds.
-
-If any of the above timing parameters are absent, current parameter value will
-be taken from the corresponding HW reg.
-
-Example for pl172 with nor flash on chip select 0 shown below.
-
-emc: memory-controller@40005000 {
-	compatible = "arm,pl172", "arm,primecell";
-	reg = <0x40005000 0x1000>;
-	clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>;
-	clock-names = "mpmcclk", "apb_pclk";
-	#address-cells = <2>;
-	#size-cells = <1>;
-	ranges = <0 0 0x1c000000 0x1000000
-		  1 0 0x1d000000 0x1000000
-		  2 0 0x1e000000 0x1000000
-		  3 0 0x1f000000 0x1000000>;
-
-	cs0 {
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges;
-
-		mpmc,cs = <0>;
-		mpmc,memory-width = <16>;
-		mpmc,byte-lane-low;
-		mpmc,write-enable-delay = <0>;
-		mpmc,output-enable-delay = <0>;
-		mpmc,read-enable-delay = <70>;
-		mpmc,page-mode-read-delay = <70>;
-
-		flash@0,0 {
-			compatible = "sst,sst39vf320", "cfi-flash";
-			reg = <0 0 0x400000>;
-			bank-width = <2>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			partition@0 {
-				label = "data";
-				reg = <0 0x400000>;
-			};
-		};
-	};
-};