diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci')
23 files changed, 754 insertions, 376 deletions
diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt deleted file mode 100644 index 3abeecf4983f..000000000000 --- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt +++ /dev/null @@ -1,39 +0,0 @@ -* Freescale 83xx and 512x PCI bridges - -Freescale 83xx and 512x SOCs include the same PCI bridge core. - -83xx/512x specific notes: -- reg: should contain two address length tuples - The first is for the internal PCI bridge registers - The second is for the PCI config space access registers - -Example (MPC8313ERDB) - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0E -mini PCI */ - 0x7000 0x0 0x0 0x1 &ipic 18 0x8 - 0x7000 0x0 0x0 0x2 &ipic 18 0x8 - 0x7000 0x0 0x0 0x3 &ipic 18 0x8 - 0x7000 0x0 0x0 0x4 &ipic 18 0x8 - - /* IDSEL 0x0F - PCI slot */ - 0x7800 0x0 0x0 0x1 &ipic 17 0x8 - 0x7800 0x0 0x0 0x2 &ipic 18 0x8 - 0x7800 0x0 0x0 0x3 &ipic 17 0x8 - 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt deleted file mode 100644 index 2b8ca920a7fa..000000000000 --- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt +++ /dev/null @@ -1,59 +0,0 @@ -Aardvark PCIe controller - -This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC. - -The Device Tree node describing an Aardvark PCIe controller must -contain the following properties: - - - compatible: Should be "marvell,armada-3700-pcie" - - reg: range of registers for the PCIe controller - - interrupts: the interrupt line of the PCIe controller - - #address-cells: set to <3> - - #size-cells: set to <2> - - device_type: set to "pci" - - ranges: ranges for the PCI memory and I/O regions - - #interrupt-cells: set to <1> - - msi-controller: indicates that the PCIe controller can itself - handle MSI interrupts - - msi-parent: pointer to the MSI controller to be used - - interrupt-map-mask and interrupt-map: standard PCI properties to - define the mapping of the PCIe interface to interrupt numbers. - - bus-range: PCI bus numbers covered - - phys: the PCIe PHY handle - - max-link-speed: see pci.txt - - reset-gpios: see pci.txt - -In addition, the Device Tree describing an Aardvark PCIe controller -must include a sub-node that describes the legacy interrupt controller -built into the PCIe controller. This sub-node must have the following -properties: - - - interrupt-controller - - #interrupt-cells: set to <1> - -Example: - - pcie0: pcie@d0070000 { - compatible = "marvell,armada-3700-pcie"; - device_type = "pci"; - reg = <0 0xd0070000 0 0x20000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - msi-controller; - msi-parent = <&pcie0>; - ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ - 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - phys = <&comphy1 0>; - pcie_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/pci/amazon,al-alpine-v3-pcie.yaml b/Documentation/devicetree/bindings/pci/amazon,al-alpine-v3-pcie.yaml new file mode 100644 index 000000000000..45244cad5f30 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/amazon,al-alpine-v3-pcie.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/amazon,al-alpine-v3-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amazon Annapurna Labs Alpine v3 PCIe Host Bridge + +maintainers: + - Jonathan Chocron <jonnyc@amazon.com> + +description: + Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys + DesignWare PCI controller. + +allOf: + - $ref: snps,dw-pcie.yaml# + +properties: + compatible: + enum: + - amazon,al-alpine-v2-pcie + - amazon,al-alpine-v3-pcie + + reg: + items: + - description: PCIe ECAM space + - description: AL proprietary registers + - description: Designware PCIe registers + + reg-names: + items: + - const: config + - const: controller + - const: dbi + + interrupts: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@fb600000 { + compatible = "amazon,al-alpine-v3-pcie"; + reg = <0x0 0xfb600000 0x0 0x00100000 + 0x0 0xfd800000 0x0 0x00010000 + 0x0 0xfd810000 0x0 0x00001000>; + reg-names = "config", "controller", "dbi"; + bus-range = <0 255>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x00 0 0 7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */ + ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/apm,xgene-pcie.yaml b/Documentation/devicetree/bindings/pci/apm,xgene-pcie.yaml new file mode 100644 index 000000000000..2504b8235889 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/apm,xgene-pcie.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/apm,xgene-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AppliedMicro X-Gene PCIe interface + +maintainers: + - Toan Le <toan@os.amperecomputing.com> + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + oneOf: + - items: + - const: apm,xgene-storm-pcie + - const: apm,xgene-pcie + - items: + - const: apm,xgene-pcie + + reg: + items: + - description: Controller configuration registers + - description: PCI configuration space registers + + reg-names: + items: + - const: csr + - const: cfg + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pcie + + dma-coherent: true + + msi-parent: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - '#interrupt-cells' + - interrupt-map-mask + - interrupt-map + - clocks + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1f2b0000 { + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x00 0x1f2b0000 0x0 0x00010000>, /* Controller registers */ + <0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000>, /* io */ + <0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000>, + <0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1>, + <0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1>, + <0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1>, + <0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt deleted file mode 100644 index cc6dcdb676b9..000000000000 --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Axis ARTPEC-6 PCIe interface - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in snps,dw-pcie.yaml. - -Required properties: -- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode; - "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode; - "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode; - "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode; -- reg: base addresses and lengths of the PCIe controller (DBI), - the PHY controller, and configuration address space. -- reg-names: Must include the following entries: - - "dbi" - - "phy" - - "config" -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - - "msi": The interrupt that is asserted when an MSI is received -- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller, - used to enable and control the Synopsys IP. - -Example: - - pcie@f8050000 { - compatible = "axis,artpec6-pcie", "snps,dw-pcie"; - reg = <0xf8050000 0x2000 - 0xf8040000 0x1000 - 0xc0000000 0x2000>; - reg-names = "dbi", "phy", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - /* downstream I/O */ - ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; - num-lanes = <2>; - bus-range = <0x00 0xff>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - axis,syscon-pcie = <&syscon>; - }; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.yaml b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.yaml new file mode 100644 index 000000000000..dcc5661aa004 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 Axis AB +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/axis,artpec6-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axis ARTPEC-6 PCIe host controller + +maintainers: + - Jesper Nilsson <jesper.nilsson@axis.com> + +description: + This PCIe host controller is based on the Synopsys DesignWare PCIe IP. + +select: + properties: + compatible: + contains: + enum: + - axis,artpec6-pcie + - axis,artpec6-pcie-ep + - axis,artpec7-pcie + - axis,artpec7-pcie-ep + required: + - compatible + +properties: + compatible: + items: + - enum: + - axis,artpec6-pcie + - axis,artpec6-pcie-ep + - axis,artpec7-pcie + - axis,artpec7-pcie-ep + - const: snps,dw-pcie + + reg: + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + maxItems: 4 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: msi + + axis,syscon-pcie: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System controller phandle used to enable and control the Synopsys IP. + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - axis,syscon-pcie + +oneOf: + - $ref: snps,dw-pcie.yaml# + properties: + reg: + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: phy + - const: config + + - $ref: snps,dw-pcie-ep.yaml# + properties: + reg: + minItems: 4 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: phy + - const: addr_space + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie@f8050000 { + compatible = "axis,artpec6-pcie", "snps,dw-pcie"; + device_type = "pci"; + reg = <0xf8050000 0x2000 + 0xf8040000 0x1000 + 0xc0000000 0x2000>; + reg-names = "dbi", "phy", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xc0002000 0 0x00010000>, + <0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; + num-lanes = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + axis,syscon-pcie = <&syscon>; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index c4f9674e8695..812ef5957cfc 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -107,6 +107,10 @@ properties: - const: bridge - const: swinit + num-lanes: + default: 1 + maximum: 4 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml b/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml new file mode 100644 index 000000000000..68090b3ca419 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/marvell,armada-3700-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 3700 (Aardvark) PCIe Controller + +maintainers: + - Thomas Petazzoni <thomas.petazzoni@bootlin.com> + - Pali Rohár <pali@kernel.org> + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + const: marvell,armada-3700-pcie + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + msi-controller: true + + msi-parent: + maxItems: 1 + + phys: + maxItems: 1 + + reset-gpios: + description: PCIe reset GPIO signals. + + interrupt-controller: + type: object + additionalProperties: false + + properties: + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + required: + - interrupt-controller + - '#interrupt-cells' + +required: + - compatible + - reg + - interrupts + - '#interrupt-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@d0070000 { + compatible = "marvell,armada-3700-pcie"; + device_type = "pci"; + reg = <0 0xd0070000 0 0x20000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + msi-parent = <&pcie0>; + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000>, + <0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + phys = <&comphy1 0>; + max-link-speed = <2>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 214caa4ec3d5..1868a10d5b10 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -51,7 +51,7 @@ properties: max-link-speed: $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 1, 2, 3, 4 ] + enum: [ 1, 2, 3, 4, 5, 6 ] msi-map: description: | diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt deleted file mode 100644 index 2ad1fe466eab..000000000000 --- a/Documentation/devicetree/bindings/pci/pcie-al.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Amazon Annapurna Labs PCIe host bridge - -Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare -PCI core. It inherits common properties defined in -Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. - -Properties of the host controller node that differ from it are: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain - - "amazon,al-alpine-v2-pcie" for alpine_v2 - - "amazon,al-alpine-v3-pcie" for alpine_v3 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register ranges as listed in the reg-names property - -- reg-names: - Usage: required - Value type: <stringlist> - Definition: Must include the following entries - - "config" PCIe ECAM space - - "controller" AL proprietary registers - - "dbi" Designware PCIe registers - -Example: - - pcie-external0: pcie@fb600000 { - compatible = "amazon,al-alpine-v3-pcie"; - reg = <0x0 0xfb600000 0x0 0x00100000 - 0x0 0xfd800000 0x0 0x00010000 - 0x0 0xfd810000 0x0 0x00001000>; - reg-names = "config", "controller", "dbi"; - bus-range = <0 255>; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0x00 0 0 7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */ - ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>; - }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml index 0480c58f7d99..ab2509ec1c4b 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -51,10 +51,18 @@ properties: phys: maxItems: 1 + deprecated: true + description: + This property is deprecated, instead of referencing this property from + the host bridge node, use the property from the PCIe root port node. phy-names: items: - const: pciephy + deprecated: true + description: + Phandle to the register map node. This property is deprecated, and not + required to add in the root port also, as the root port has only one phy. power-domains: maxItems: 1 @@ -71,12 +79,18 @@ properties: maxItems: 12 perst-gpios: - description: GPIO controlled connection to PERST# signal + description: GPIO controlled connection to PERST# signal. This property is + deprecated, instead of referencing this property from the host bridge node, + use the reset-gpios property from the root port node. maxItems: 1 + deprecated: true wake-gpios: - description: GPIO controlled connection to WAKE# signal + description: GPIO controlled connection to WAKE# signal. This property is + deprecated, instead of referencing this property from the host bridge node, + use the property from the PCIe root port node. maxItems: 1 + deprecated: true vddpe-3v3-supply: description: PCIe endpoint power supply @@ -85,6 +99,20 @@ properties: opp-table: type: object +patternProperties: + "^pcie@": + type: object + $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + reg: + maxItems: 1 + + phys: + maxItems: 1 + + unevaluatedProperties: false + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml new file mode 100644 index 000000000000..ef705a02fcd9 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8255p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SA8255p based firmware managed and ECAM compliant PCIe Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SA8255p SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP which is managed by firmware, and configured in ECAM mode. + +properties: + compatible: + const: qcom,pcie-sa8255p + + reg: + description: + The base address and size of the ECAM area for accessing PCI + Configuration Space, as accessed from the parent bus. The base + address corresponds to the first bus in the "bus-range" property. If + no "bus-range" is specified, this will be bus 0 (the default). + maxItems: 1 + + ranges: + description: + As described in IEEE Std 1275-1994, but must provide at least a + definition of non-prefetchable memory. One or both of prefetchable Memory + may also be provided. + minItems: 1 + maxItems: 2 + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + power-domains: + maxItems: 1 + + dma-coherent: true + iommu-map: true + +required: + - compatible + - reg + - ranges + - power-domains + - interrupts + - interrupt-names + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pci@1c00000 { + compatible = "qcom,pcie-sa8255p"; + reg = <0x4 0x00000000 0 0x10000000>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>, + <0x43000000 0x4 0x10100000 0x4 0x10100000 0x0 0x40000000>; + bus-range = <0x00 0xff>; + dma-coherent; + linux,pci-domain = <0>; + power-domains = <&scmi5_pd 0>; + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml index e3fa232da2ca..19afe2a03409 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml @@ -16,7 +16,12 @@ description: properties: compatible: - const: qcom,pcie-sa8775p + oneOf: + - const: qcom,pcie-sa8775p + - items: + - enum: + - qcom,pcie-qcs8300 + - const: qcom,pcie-sa8775p reg: minItems: 6 @@ -61,11 +66,14 @@ properties: - const: global resets: - maxItems: 1 + items: + - description: PCIe controller reset + - description: PCIe link down reset reset-names: items: - const: pci + - const: link_down required: - interconnects @@ -161,8 +169,10 @@ examples: power-domains = <&gcc PCIE_0_GDSC>; - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "pci"; + resets = <&gcc GCC_PCIE_0_BCR>, + <&gcc GCC_PCIE_0_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml index ff508f592a1a..4d0a91556603 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -165,9 +165,6 @@ examples: iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; - phys = <&pcie1_phy>; - phy-names = "pciephy"; - pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>; @@ -176,7 +173,18 @@ examples: resets = <&gcc GCC_PCIE_1_BCR>; reset-names = "pci"; - perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&pp3300_ssd>; + pcie1_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie1_phy>; + + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml index 331fc25d7a17..34a4d7b2c845 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml @@ -33,8 +33,8 @@ properties: - const: mhi # MHI registers clocks: - minItems: 8 - maxItems: 8 + minItems: 6 + maxItems: 6 clock-names: items: @@ -44,8 +44,6 @@ properties: - const: bus_master # Master AXI clock - const: bus_slave # Slave AXI clock - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock interrupts: minItems: 8 @@ -117,17 +115,13 @@ examples: <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; dma-coherent; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml index a604f2a79de3..26b247a41785 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml @@ -16,7 +16,12 @@ description: properties: compatible: - const: qcom,pcie-sm8150 + oneOf: + - const: qcom,pcie-sm8150 + - items: + - enum: + - qcom,pcie-qcs615 + - const: qcom,pcie-sm8150 reg: minItems: 5 @@ -33,8 +38,8 @@ properties: - const: mhi # MHI registers clocks: - minItems: 8 - maxItems: 8 + minItems: 6 + maxItems: 6 clock-names: items: @@ -44,8 +49,6 @@ properties: - const: bus_master # Master AXI clock - const: bus_slave # Slave AXI clock - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ref # REFERENCE clock interrupts: minItems: 8 @@ -111,17 +114,13 @@ examples: <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "tbu", - "ref"; + "slave_q2a"; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 69e82f438f58..b3216141881c 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -108,7 +108,7 @@ properties: - description: See native 'dbi' CSR region for details. enum: [ ctrl ] - description: See native 'elbi/app' CSR region for details. - enum: [ apb, mgmt, link, ulreg, appl ] + enum: [ apb, mgmt, link, ulreg, appl, controller ] - description: See native 'atu' CSR region for details. enum: [ atu_dma ] - description: Syscon-related CSR regions. diff --git a/Documentation/devicetree/bindings/pci/sophgo,sg2044-pcie.yaml b/Documentation/devicetree/bindings/pci/sophgo,sg2044-pcie.yaml new file mode 100644 index 000000000000..ff1133bae3ba --- /dev/null +++ b/Documentation/devicetree/bindings/pci/sophgo,sg2044-pcie.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/sophgo,sg2044-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe Root Complex controller on Sophgo SoCs + +maintainers: + - Inochi Amaoto <inochiama@gmail.com> + +description: + SG2044 SoC PCIe Root Complex controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: sophgo,sg2044-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers + - description: iATU registers + - description: Config registers + - description: Sophgo designed configuration registers + + reg-names: + items: + - const: dbi + - const: atu + - const: config + - const: app + + clocks: + items: + - description: core clk + + clock-names: + items: + - const: core + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + items: + - description: combined legacy interrupt + + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + - interrupts + + additionalProperties: false + + msi-parent: true + + ranges: + maxItems: 5 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@6c00400000 { + compatible = "sophgo,sg2044-pcie"; + reg = <0x6c 0x00400000 0x0 0x00001000>, + <0x6c 0x00700000 0x0 0x00004000>, + <0x40 0x00000000 0x0 0x00001000>, + <0x6c 0x00780c00 0x0 0x00000400>; + reg-names = "dbi", "atu", "config", "app"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + clocks = <&clk 0>; + clock-names = "core"; + device_type = "pci"; + linux,pci-domain = <0>; + msi-parent = <&msi>; + ranges = <0x01000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00200000>, + <0x42000000 0x0 0x00000000 0x0 0x00000000 0x0 0x04000000>, + <0x02000000 0x0 0x04000000 0x0 0x04000000 0x0 0x04000000>, + <0x43000000 0x42 0x00000000 0x42 0x00000000 0x2 0x00000000>, + <0x03000000 0x41 0x00000000 0x41 0x00000000 0x1 0x00000000>; + + interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&intc>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt deleted file mode 100644 index d5a14f5dad46..000000000000 --- a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt +++ /dev/null @@ -1,14 +0,0 @@ -SPEAr13XX PCIe DT detail: -================================ - -SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY -controller. - -Required properties: -- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". -- phys : phandle to PHY node associated with PCIe controller -- phy-names : must be "pcie-phy" -- All other definitions as per generic PCI bindings - - Optional properties: -- st,pcie-is-gen1 indicates that forced gen1 initialization is needed. diff --git a/Documentation/devicetree/bindings/pci/st,spear1340-pcie.yaml b/Documentation/devicetree/bindings/pci/st,spear1340-pcie.yaml new file mode 100644 index 000000000000..784f97b3cb7a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/st,spear1340-pcie.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/st,spear1340-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr1340 PCIe controller + +maintainers: + - Pratyush Anand <pratyush.anand@gmail.com> + +description: + SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY + controller. + +select: + properties: + compatible: + contains: + const: st,spear1340-pcie + required: + - compatible + +properties: + compatible: + items: + - const: st,spear1340-pcie + - const: snps,dw-pcie + + phys: + maxItems: 1 + + st,pcie-is-gen1: + type: boolean + description: Indicates forced gen1 initialization is needed. + +required: + - compatible + - phys + - phy-names + +allOf: + - $ref: snps,dw-pcie.yaml# + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index 97f2579ea908..29580cbd1767 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -123,21 +123,21 @@ examples: #size-cells = <2>; pcie0_ep: pcie-ep@d000000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02900000 0x00 0x1000>, - <0x00 0x02907000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x10000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 239 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - dma-coherent; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - }; + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; }; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt deleted file mode 100644 index 85d9b95234f7..000000000000 --- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +++ /dev/null @@ -1,68 +0,0 @@ -* AppliedMicro X-Gene v1 PCIe MSI controller - -Required properties: - -- compatible: should be "apm,xgene1-msi" to identify - X-Gene v1 PCIe MSI controller block. -- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node -- reg: physical base address (0x79000000) and length (0x900000) for controller - registers. These registers include the MSI termination address and data - registers as well as the MSI interrupt status registers. -- reg-names: not required -- interrupts: A list of 16 interrupt outputs of the controller, starting from - interrupt number 0x10 to 0x1f. -- interrupt-names: not required - -Each PCIe node needs to have property msi-parent that points to an MSI -controller node - -Examples: - -SoC DTSI: - - + MSI node: - msi@79000000 { - compatible = "apm,xgene1-msi"; - msi-controller; - reg = <0x00 0x79000000 0x0 0x900000>; - interrupts = <0x0 0x10 0x4> - <0x0 0x11 0x4> - <0x0 0x12 0x4> - <0x0 0x13 0x4> - <0x0 0x14 0x4> - <0x0 0x15 0x4> - <0x0 0x16 0x4> - <0x0 0x17 0x4> - <0x0 0x18 0x4> - <0x0 0x19 0x4> - <0x0 0x1a 0x4> - <0x0 0x1b 0x4> - <0x0 0x1c 0x4> - <0x0 0x1d 0x4> - <0x0 0x1e 0x4> - <0x0 0x1f 0x4>; - }; - - + PCIe controller node with msi-parent property pointing to MSI node: - pcie0: pcie@1f2b0000 { - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ - 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; - dma-coherent; - clocks = <&pcie0clk 0>; - msi-parent= <&msi>; - }; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt deleted file mode 100644 index 92490330dc1c..000000000000 --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt +++ /dev/null @@ -1,50 +0,0 @@ -* AppliedMicro X-Gene PCIe interface - -Required properties: -- device_type: set to "pci" -- compatible: should contain "apm,xgene-pcie" to identify the core. -- reg: A list of physical base address and length for each set of controller - registers. Must contain an entry for each entry in the reg-names - property. -- reg-names: Must include the following entries: - "csr": controller configuration registers. - "cfg": PCIe configuration space registers. -- #address-cells: set to <3> -- #size-cells: set to <2> -- ranges: ranges for the outbound memory, I/O regions. -- dma-ranges: ranges for the inbound memory regions. -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map: standard PCI properties - to define the mapping of the PCIe interface to interrupt - numbers. -- clocks: from common clock binding: handle to pci clock. - -Optional properties: -- status: Either "ok" or "disabled". -- dma-coherent: Present if DMA operations are coherent - -Example: - - pcie0: pcie@1f2b0000 { - status = "disabled"; - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ - 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; - dma-coherent; - clocks = <&pcie0clk 0>; - }; - |