diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci')
48 files changed, 1632 insertions, 1538 deletions
diff --git a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt b/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt deleted file mode 100644 index 3abeecf4983f..000000000000 --- a/Documentation/devicetree/bindings/pci/83xx-512x-pci.txt +++ /dev/null @@ -1,39 +0,0 @@ -* Freescale 83xx and 512x PCI bridges - -Freescale 83xx and 512x SOCs include the same PCI bridge core. - -83xx/512x specific notes: -- reg: should contain two address length tuples - The first is for the internal PCI bridge registers - The second is for the PCI config space access registers - -Example (MPC8313ERDB) - pci0: pci@e0008500 { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x0E -mini PCI */ - 0x7000 0x0 0x0 0x1 &ipic 18 0x8 - 0x7000 0x0 0x0 0x2 &ipic 18 0x8 - 0x7000 0x0 0x0 0x3 &ipic 18 0x8 - 0x7000 0x0 0x0 0x4 &ipic 18 0x8 - - /* IDSEL 0x0F - PCI slot */ - 0x7800 0x0 0x0 0x1 &ipic 17 0x8 - 0x7800 0x0 0x0 0x2 &ipic 18 0x8 - 0x7800 0x0 0x0 0x3 &ipic 17 0x8 - 0x7800 0x0 0x0 0x4 &ipic 18 0x8>; - interrupt-parent = <&ipic>; - interrupts = <66 0x8>; - bus-range = <0x0 0x0>; - ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000 - 0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>; - clock-frequency = <66666666>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0xe0008500 0x100 /* internal registers */ - 0xe0008300 0x8>; /* config space access registers */ - compatible = "fsl,mpc8349-pci"; - device_type = "pci"; - }; diff --git a/Documentation/devicetree/bindings/pci/aardvark-pci.txt b/Documentation/devicetree/bindings/pci/aardvark-pci.txt deleted file mode 100644 index 2b8ca920a7fa..000000000000 --- a/Documentation/devicetree/bindings/pci/aardvark-pci.txt +++ /dev/null @@ -1,59 +0,0 @@ -Aardvark PCIe controller - -This PCIe controller is used on the Marvell Armada 3700 ARM64 SoC. - -The Device Tree node describing an Aardvark PCIe controller must -contain the following properties: - - - compatible: Should be "marvell,armada-3700-pcie" - - reg: range of registers for the PCIe controller - - interrupts: the interrupt line of the PCIe controller - - #address-cells: set to <3> - - #size-cells: set to <2> - - device_type: set to "pci" - - ranges: ranges for the PCI memory and I/O regions - - #interrupt-cells: set to <1> - - msi-controller: indicates that the PCIe controller can itself - handle MSI interrupts - - msi-parent: pointer to the MSI controller to be used - - interrupt-map-mask and interrupt-map: standard PCI properties to - define the mapping of the PCIe interface to interrupt numbers. - - bus-range: PCI bus numbers covered - - phys: the PCIe PHY handle - - max-link-speed: see pci.txt - - reset-gpios: see pci.txt - -In addition, the Device Tree describing an Aardvark PCIe controller -must include a sub-node that describes the legacy interrupt controller -built into the PCIe controller. This sub-node must have the following -properties: - - - interrupt-controller - - #interrupt-cells: set to <1> - -Example: - - pcie0: pcie@d0070000 { - compatible = "marvell,armada-3700-pcie"; - device_type = "pci"; - reg = <0 0xd0070000 0 0x20000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - msi-controller; - msi-parent = <&pcie0>; - ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */ - 0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/ - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc 0>, - <0 0 0 2 &pcie_intc 1>, - <0 0 0 3 &pcie_intc 2>, - <0 0 0 4 &pcie_intc 3>; - phys = <&comphy1 0>; - pcie_intc: interrupt-controller { - interrupt-controller; - #interrupt-cells = <1>; - }; - }; diff --git a/Documentation/devicetree/bindings/pci/amazon,al-alpine-v3-pcie.yaml b/Documentation/devicetree/bindings/pci/amazon,al-alpine-v3-pcie.yaml new file mode 100644 index 000000000000..45244cad5f30 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/amazon,al-alpine-v3-pcie.yaml @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/amazon,al-alpine-v3-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amazon Annapurna Labs Alpine v3 PCIe Host Bridge + +maintainers: + - Jonathan Chocron <jonnyc@amazon.com> + +description: + Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys + DesignWare PCI controller. + +allOf: + - $ref: snps,dw-pcie.yaml# + +properties: + compatible: + enum: + - amazon,al-alpine-v2-pcie + - amazon,al-alpine-v3-pcie + + reg: + items: + - description: PCIe ECAM space + - description: AL proprietary registers + - description: Designware PCIe registers + + reg-names: + items: + - const: config + - const: controller + - const: dbi + + interrupts: + maxItems: 1 + +unevaluatedProperties: false + +required: + - compatible + - reg + - reg-names + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@fb600000 { + compatible = "amazon,al-alpine-v3-pcie"; + reg = <0x0 0xfb600000 0x0 0x00100000 + 0x0 0xfd800000 0x0 0x00010000 + 0x0 0xfd810000 0x0 0x00001000>; + reg-names = "config", "controller", "dbi"; + bus-range = <0 255>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + interrupt-map-mask = <0x00 0 0 7>; + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */ + ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/apm,xgene-pcie.yaml b/Documentation/devicetree/bindings/pci/apm,xgene-pcie.yaml new file mode 100644 index 000000000000..2504b8235889 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/apm,xgene-pcie.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/apm,xgene-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: AppliedMicro X-Gene PCIe interface + +maintainers: + - Toan Le <toan@os.amperecomputing.com> + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + oneOf: + - items: + - const: apm,xgene-storm-pcie + - const: apm,xgene-pcie + - items: + - const: apm,xgene-pcie + + reg: + items: + - description: Controller configuration registers + - description: PCI configuration space registers + + reg-names: + items: + - const: csr + - const: cfg + + clocks: + maxItems: 1 + + clock-names: + items: + - const: pcie + + dma-coherent: true + + msi-parent: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - '#interrupt-cells' + - interrupt-map-mask + - interrupt-map + - clocks + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@1f2b0000 { + compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x00 0x1f2b0000 0x0 0x00010000>, /* Controller registers */ + <0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ + reg-names = "csr", "cfg"; + ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000>, /* io */ + <0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ + dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000>, + <0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1>, + <0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1>, + <0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1>, + <0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; + dma-coherent; + clocks = <&pcie0clk 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml index c8775f9cb071..c0852be04f6d 100644 --- a/Documentation/devicetree/bindings/pci/apple,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml @@ -17,6 +17,10 @@ description: | implements its root ports. But the ATU found on most DesignWare PCIe host bridges is absent. + On systems derived from T602x, the PHY registers are in a region + separate from the port registers. In that case, there is one PHY + register range per port register range. + All root ports share a single ECAM space, but separate GPIOs are used to take the PCI devices on those ports out of reset. Therefore the standard "reset-gpios" and "max-link-speed" properties appear on @@ -30,16 +34,18 @@ description: | properties: compatible: - items: - - enum: - - apple,t8103-pcie - - apple,t8112-pcie - - apple,t6000-pcie - - const: apple,pcie + oneOf: + - items: + - enum: + - apple,t8103-pcie + - apple,t8112-pcie + - apple,t6000-pcie + - const: apple,pcie + - const: apple,t6020-pcie reg: minItems: 3 - maxItems: 6 + maxItems: 10 reg-names: minItems: 3 @@ -50,6 +56,10 @@ properties: - const: port1 - const: port2 - const: port3 + - const: phy0 + - const: phy1 + - const: phy2 + - const: phy3 ranges: minItems: 2 @@ -98,6 +108,15 @@ allOf: maxItems: 5 interrupts: maxItems: 3 + - if: + properties: + compatible: + contains: + const: apple,t6020-pcie + then: + properties: + reg-names: + minItems: 10 examples: - | diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt deleted file mode 100644 index cc6dcdb676b9..000000000000 --- a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Axis ARTPEC-6 PCIe interface - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in snps,dw-pcie.yaml. - -Required properties: -- compatible: "axis,artpec6-pcie", "snps,dw-pcie" for ARTPEC-6 in RC mode; - "axis,artpec6-pcie-ep", "snps,dw-pcie" for ARTPEC-6 in EP mode; - "axis,artpec7-pcie", "snps,dw-pcie" for ARTPEC-7 in RC mode; - "axis,artpec7-pcie-ep", "snps,dw-pcie" for ARTPEC-7 in EP mode; -- reg: base addresses and lengths of the PCIe controller (DBI), - the PHY controller, and configuration address space. -- reg-names: Must include the following entries: - - "dbi" - - "phy" - - "config" -- interrupts: A list of interrupt outputs of the controller. Must contain an - entry for each entry in the interrupt-names property. -- interrupt-names: Must include the following entries: - - "msi": The interrupt that is asserted when an MSI is received -- axis,syscon-pcie: A phandle pointing to the ARTPEC-6 system controller, - used to enable and control the Synopsys IP. - -Example: - - pcie@f8050000 { - compatible = "axis,artpec6-pcie", "snps,dw-pcie"; - reg = <0xf8050000 0x2000 - 0xf8040000 0x1000 - 0xc0000000 0x2000>; - reg-names = "dbi", "phy", "config"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - /* downstream I/O */ - ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; - num-lanes = <2>; - bus-range = <0x00 0xff>; - interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "msi"; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; - interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, - <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; - axis,syscon-pcie = <&syscon>; - }; diff --git a/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.yaml b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.yaml new file mode 100644 index 000000000000..dcc5661aa004 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/axis,artpec6-pcie.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2025 Axis AB +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/axis,artpec6-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Axis ARTPEC-6 PCIe host controller + +maintainers: + - Jesper Nilsson <jesper.nilsson@axis.com> + +description: + This PCIe host controller is based on the Synopsys DesignWare PCIe IP. + +select: + properties: + compatible: + contains: + enum: + - axis,artpec6-pcie + - axis,artpec6-pcie-ep + - axis,artpec7-pcie + - axis,artpec7-pcie-ep + required: + - compatible + +properties: + compatible: + items: + - enum: + - axis,artpec6-pcie + - axis,artpec6-pcie-ep + - axis,artpec7-pcie + - axis,artpec7-pcie-ep + - const: snps,dw-pcie + + reg: + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + maxItems: 4 + + interrupts: + maxItems: 1 + + interrupt-names: + items: + - const: msi + + axis,syscon-pcie: + $ref: /schemas/types.yaml#/definitions/phandle + description: + System controller phandle used to enable and control the Synopsys IP. + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - axis,syscon-pcie + +oneOf: + - $ref: snps,dw-pcie.yaml# + properties: + reg: + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: phy + - const: config + + - $ref: snps,dw-pcie-ep.yaml# + properties: + reg: + minItems: 4 + + reg-names: + items: + - const: dbi + - const: dbi2 + - const: phy + - const: addr_space + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pcie@f8050000 { + compatible = "axis,artpec6-pcie", "snps,dw-pcie"; + device_type = "pci"; + reg = <0xf8050000 0x2000 + 0xf8040000 0x1000 + 0xc0000000 0x2000>; + reg-names = "dbi", "phy", "config"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xc0002000 0 0x00010000>, + <0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; + num-lanes = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + axis,syscon-pcie = <&syscon>; + }; diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml index 29f0e1eb5096..812ef5957cfc 100644 --- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml @@ -107,6 +107,10 @@ properties: - const: bridge - const: swinit + num-lanes: + default: 1 + maximum: 4 + required: - compatible - reg @@ -186,49 +190,48 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> scb { - #address-cells = <2>; - #size-cells = <1>; - pcie0: pcie@7d500000 { - compatible = "brcm,bcm2711-pcie"; - reg = <0x0 0x7d500000 0x9310>; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pcie", "msi"; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH - 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH - 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH - 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; - - msi-parent = <&pcie0>; - msi-controller; - ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; - dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>, - <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; - brcm,enable-ssc; - brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; - - /* PCIe bridge, Root Port */ - pci@0,0 { - #address-cells = <3>; - #size-cells = <2>; - reg = <0x0 0x0 0x0 0x0 0x0>; - compatible = "pciclass,0604"; - device_type = "pci"; - vpcie3v3-supply = <&vreg7>; - ranges; - - /* PCIe endpoint */ - pci-ep@0,0 { - assigned-addresses = - <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>; - reg = <0x0 0x0 0x0 0x0 0x0>; - compatible = "pci14e4,1688"; - }; - }; + #address-cells = <2>; + #size-cells = <1>; + pcie0: pcie@7d500000 { + compatible = "brcm,bcm2711-pcie"; + reg = <0x0 0x7d500000 0x9310>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "msi"; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH + 0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH + 0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH + 0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + + msi-parent = <&pcie0>; + msi-controller; + ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>; + dma-ranges = <0x42000000 0x1 0x00000000 0x0 0x40000000 0x0 0x80000000>, + <0x42000000 0x1 0x80000000 0x3 0x00000000 0x0 0x80000000>; + brcm,enable-ssc; + brcm,scb-sizes = <0x0000000080000000 0x0000000080000000>; + + /* PCIe bridge, Root Port */ + pci@0,0 { + #address-cells = <3>; + #size-cells = <2>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pciclass,0604"; + device_type = "pci"; + vpcie3v3-supply = <&vreg7>; + ranges; + + /* PCIe endpoint */ + pci-ep@0,0 { + assigned-addresses = <0x82010000 0x0 0xf8000000 0x6 0x00000000 0x0 0x2000>; + reg = <0x0 0x0 0x0 0x0 0x0>; + compatible = "pci14e4,1688"; + }; }; + }; }; diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml index 98651ab22103..8735293962ee 100644 --- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.yaml @@ -37,14 +37,14 @@ examples: #size-cells = <2>; pcie-ep@fc000000 { - compatible = "cdns,cdns-pcie-ep"; - reg = <0x0 0xfc000000 0x0 0x01000000>, - <0x0 0x80000000 0x0 0x40000000>; - reg-names = "reg", "mem"; - cdns,max-outbound-regions = <16>; - max-functions = /bits/ 8 <8>; - phys = <&pcie_phy0>; - phy-names = "pcie-phy"; + compatible = "cdns,cdns-pcie-ep"; + reg = <0x0 0xfc000000 0x0 0x01000000>, + <0x0 0x80000000 0x0 0x40000000>; + reg-names = "reg", "mem"; + cdns,max-outbound-regions = <16>; + max-functions = /bits/ 8 <8>; + phys = <&pcie_phy0>; + phy-names = "pcie-phy"; }; }; ... diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml index 730e63fd7669..b19f61ae72fb 100644 --- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml @@ -53,17 +53,17 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> pcie-ep@37000000 { - compatible = "intel,keembay-pcie-ep"; - reg = <0x37000000 0x00001000>, - <0x37100000 0x00001000>, - <0x37300000 0x00001000>, - <0x36000000 0x01000000>, - <0x37800000 0x00000200>; - reg-names = "dbi", "dbi2", "atu", "addr_space", "apb"; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access"; - num-lanes = <2>; + compatible = "intel,keembay-pcie-ep"; + reg = <0x37000000 0x00001000>, + <0x37100000 0x00001000>, + <0x37300000 0x00001000>, + <0x36000000 0x01000000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "dbi2", "atu", "addr_space", "apb"; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access"; + num-lanes = <2>; }; diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml index 1fd557504b10..dd71e3d6bf94 100644 --- a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml @@ -75,23 +75,23 @@ examples: #define KEEM_BAY_A53_PCIE #define KEEM_BAY_A53_AUX_PCIE pcie@37000000 { - compatible = "intel,keembay-pcie"; - reg = <0x37000000 0x00001000>, - <0x37300000 0x00001000>, - <0x36e00000 0x00200000>, - <0x37800000 0x00000200>; - reg-names = "dbi", "atu", "config", "apb"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>; - interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "pcie", "pcie_ev", "pcie_err"; - clocks = <&scmi_clk KEEM_BAY_A53_PCIE>, - <&scmi_clk KEEM_BAY_A53_AUX_PCIE>; - clock-names = "master", "aux"; - reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>; - num-lanes = <2>; + compatible = "intel,keembay-pcie"; + reg = <0x37000000 0x00001000>, + <0x37300000 0x00001000>, + <0x36e00000 0x00200000>, + <0x37800000 0x00000200>; + reg-names = "dbi", "atu", "config", "apb"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>; + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "pcie", "pcie_ev", "pcie_err"; + clocks = <&scmi_clk KEEM_BAY_A53_PCIE>, + <&scmi_clk KEEM_BAY_A53_AUX_PCIE>; + clock-names = "master", "aux"; + reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>; + num-lanes = <2>; }; diff --git a/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml b/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml new file mode 100644 index 000000000000..68090b3ca419 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/marvell,armada-3700-pcie.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/marvell,armada-3700-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 3700 (Aardvark) PCIe Controller + +maintainers: + - Thomas Petazzoni <thomas.petazzoni@bootlin.com> + - Pali Rohár <pali@kernel.org> + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + const: marvell,armada-3700-pcie + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + msi-controller: true + + msi-parent: + maxItems: 1 + + phys: + maxItems: 1 + + reset-gpios: + description: PCIe reset GPIO signals. + + interrupt-controller: + type: object + additionalProperties: false + + properties: + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + required: + - interrupt-controller + - '#interrupt-cells' + +required: + - compatible + - reg + - interrupts + - '#interrupt-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie@d0070000 { + compatible = "marvell,armada-3700-pcie"; + device_type = "pci"; + reg = <0 0xd0070000 0 0x20000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + msi-controller; + msi-parent = <&pcie0>; + ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000>, + <0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + phys = <&comphy1 0>; + max-link-speed = <2>; + reset-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + + pcie_intc: interrupt-controller { + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml b/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml new file mode 100644 index 000000000000..f3ba9230ce2a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/marvell,armada8k-pcie.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/marvell,armada8k-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell Armada 7K/8K PCIe interface + +maintainers: + - Thomas Petazzoni <thomas.petazzoni@bootlin.com> + +description: + This PCIe host controller is based on the Synopsys DesignWare PCIe IP. + +select: + properties: + compatible: + contains: + enum: + - marvell,armada8k-pcie + required: + - compatible + +allOf: + - $ref: snps,dw-pcie.yaml# + +properties: + compatible: + items: + - enum: + - marvell,armada8k-pcie + - const: snps,dw-pcie + + reg: + maxItems: 2 + + reg-names: + items: + - const: ctrl + - const: config + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: core + - const: reg + + interrupts: + maxItems: 1 + + msi-parent: + maxItems: 1 + + phys: + minItems: 1 + maxItems: 4 + + phy-names: + minItems: 1 + maxItems: 4 + + marvell,reset-gpio: + maxItems: 1 + deprecated: true + +required: + - interrupt-map + - clocks + - msi-parent + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + pcie@f2600000 { + compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; + reg = <0xf2600000 0x10000>, <0xf6f00000 0x80000>; + reg-names = "ctrl", "config"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + dma-coherent; + msi-parent = <&gic_v2m0>; + + ranges = <0x81000000 0 0xf9000000 0xf9000000 0 0x10000>, /* downstream I/O */ + <0x82000000 0 0xf6000000 0xf6000000 0 0xf00000>; /* non-prefetchable memory */ + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + num-lanes = <1>; + clocks = <&cpm_syscon0 1 13>; + }; +... diff --git a/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml b/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml new file mode 100644 index 000000000000..7be695320ddf --- /dev/null +++ b/Documentation/devicetree/bindings/pci/marvell,kirkwood-pcie.yaml @@ -0,0 +1,277 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/marvell,kirkwood-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell EBU PCIe interfaces + +maintainers: + - Thomas Petazzoni <thomas.petazzoni@bootlin.com> + - Pali Rohár <pali@kernel.org> + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + enum: + - marvell,armada-370-pcie + - marvell,armada-xp-pcie + - marvell,dove-pcie + - marvell,kirkwood-pcie + + ranges: + description: > + The ranges describing the MMIO registers have the following layout: + + 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s + + where: + + * r is a 32-bits value that gives the offset of the MMIO registers of + this PCIe interface, from the base of the internal registers. + + * s is a 32-bits value that give the size of this MMIO registers area. + This range entry translates the '0x82000000 0 r' PCI address into the + 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part of the internal + register window (as identified by MBUS_ID(0xf0, 0x01)). + + The ranges describing the MBus windows have the following layout: + + 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0 + + where: + + * t is the type of the MBus window (as defined by the standard PCI DT + bindings), 1 for I/O and 2 for memory. + + * s is the PCI slot that corresponds to this PCIe interface + + * w is the 'target ID' value for the MBus window + + * a the 'attribute' value for the MBus window. + + Since the location and size of the different MBus windows is not fixed in + hardware, and only determined in runtime, those ranges cover the full first + 4 GB of the physical address space, and do not translate into a valid CPU + address. + + msi-parent: + maxItems: 1 + +patternProperties: + '^pcie@': + type: object + allOf: + - $ref: /schemas/pci/pci-bus-common.yaml# + - $ref: /schemas/pci/pci-device.yaml# + unevaluatedProperties: false + + properties: + clocks: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - const: intx + - const: error + + reset-delay-us: + default: 100000 + description: todo + + marvell,pcie-port: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 3 + description: todo + + marvell,pcie-lane: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 3 + description: todo + + interrupt-controller: + type: object + additionalProperties: false + + properties: + interrupt-controller: true + + '#interrupt-cells': + const: 1 + + required: + - assigned-addresses + - clocks + - interrupt-map + - marvell,pcie-port + +unevaluatedProperties: false + +examples: + - | + #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@f001000000000000 { + compatible = "marvell,armada-xp-pcie"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + msi-parent = <&mpic>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ + 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ + 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ + 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ + 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ + 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ + 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ + 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ + 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ + 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ + 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ + 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ + 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ + 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ + 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ + 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ + + 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ + 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ + 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ + 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ + 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ + 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ + 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ + 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ + + 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ + 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ + + 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ + 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 58>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + num-lanes = <1>; + /* low-active PERST# reset on GPIO 25 */ + reset-gpios = <&gpio0 25 1>; + /* wait 20ms for device settle after reset deassertion */ + reset-delay-us = <20000>; + clocks = <&gateclk 5>; + }; + + pcie@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; + reg = <0x1000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 + 0x81000000 0 0 0x81000000 0x2 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 59>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <1>; + num-lanes = <1>; + clocks = <&gateclk 6>; + }; + + pcie@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; + reg = <0x1800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 + 0x81000000 0 0 0x81000000 0x3 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 60>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <2>; + num-lanes = <1>; + clocks = <&gateclk 7>; + }; + + pcie@4,0 { + device_type = "pci"; + assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; + reg = <0x2000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 + 0x81000000 0 0 0x81000000 0x4 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 61>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <3>; + num-lanes = <1>; + clocks = <&gateclk 8>; + }; + + pcie@5,0 { + device_type = "pci"; + assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; + reg = <0x2800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 + 0x81000000 0 0 0x81000000 0x5 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 62>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <0>; + num-lanes = <1>; + clocks = <&gateclk 9>; + }; + + pcie@6,0 { + device_type = "pci"; + assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; + reg = <0x3000 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 + 0x81000000 0 0 0x81000000 0x6 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &mpic 63>; + marvell,pcie-port = <1>; + marvell,pcie-lane = <1>; + num-lanes = <1>; + clocks = <&gateclk 10>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml index 103574d18dbc..47b0bad690d5 100644 --- a/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml @@ -50,7 +50,7 @@ properties: items: pattern: '^fic[0-3]$' - dma-coherent: true + dma-noncoherent: true ranges: minItems: 1 @@ -65,33 +65,33 @@ unevaluatedProperties: false examples: - | soc { - #address-cells = <2>; + #address-cells = <2>; + #size-cells = <2>; + pcie0: pcie@2030000000 { + compatible = "microchip,pcie-host-1.0"; + reg = <0x0 0x70000000 0x0 0x08000000>, + <0x0 0x43008000 0x0 0x00002000>, + <0x0 0x4300a000 0x0 0x00002000>; + reg-names = "cfg", "bridge", "ctrl"; + device_type = "pci"; + #address-cells = <3>; #size-cells = <2>; - pcie0: pcie@2030000000 { - compatible = "microchip,pcie-host-1.0"; - reg = <0x0 0x70000000 0x0 0x08000000>, - <0x0 0x43008000 0x0 0x00002000>, - <0x0 0x4300a000 0x0 0x00002000>; - reg-names = "cfg", "bridge", "ctrl"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupts = <119>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0 0 0 1 &pcie_intc0 0>, - <0 0 0 2 &pcie_intc0 1>, - <0 0 0 3 &pcie_intc0 2>, - <0 0 0 4 &pcie_intc0 3>; - interrupt-parent = <&plic0>; - msi-parent = <&pcie0>; - msi-controller; - bus-range = <0x00 0x7f>; - ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>; - pcie_intc0: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; + #interrupt-cells = <1>; + interrupts = <119>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc0 0>, + <0 0 0 2 &pcie_intc0 1>, + <0 0 0 3 &pcie_intc0 2>, + <0 0 0 4 &pcie_intc0 3>; + interrupt-parent = <&plic0>; + msi-parent = <&pcie0>; + msi-controller; + bus-range = <0x00 0x7f>; + ranges = <0x03000000 0x0 0x78000000 0x0 0x78000000 0x0 0x04000000>; + pcie_intc0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; }; + }; }; diff --git a/Documentation/devicetree/bindings/pci/mvebu-pci.txt b/Documentation/devicetree/bindings/pci/mvebu-pci.txt deleted file mode 100644 index 6d022a9d36ee..000000000000 --- a/Documentation/devicetree/bindings/pci/mvebu-pci.txt +++ /dev/null @@ -1,310 +0,0 @@ -* Marvell EBU PCIe interfaces - -Mandatory properties: - -- compatible: one of the following values: - marvell,armada-370-pcie - marvell,armada-xp-pcie - marvell,dove-pcie - marvell,kirkwood-pcie -- #address-cells, set to <3> -- #size-cells, set to <2> -- #interrupt-cells, set to <1> -- bus-range: PCI bus numbers covered -- device_type, set to "pci" -- ranges: ranges describing the MMIO registers to control the PCIe - interfaces, and ranges describing the MBus windows needed to access - the memory and I/O regions of each PCIe interface. -- msi-parent: Link to the hardware entity that serves as the Message - Signaled Interrupt controller for this PCI controller. - -The ranges describing the MMIO registers have the following layout: - - 0x82000000 0 r MBUS_ID(0xf0, 0x01) r 0 s - -where: - - * r is a 32-bits value that gives the offset of the MMIO - registers of this PCIe interface, from the base of the internal - registers. - - * s is a 32-bits value that give the size of this MMIO - registers area. This range entry translates the '0x82000000 0 r' PCI - address into the 'MBUS_ID(0xf0, 0x01) r' CPU address, which is part - of the internal register window (as identified by MBUS_ID(0xf0, - 0x01)). - -The ranges describing the MBus windows have the following layout: - - 0x8t000000 s 0 MBUS_ID(w, a) 0 1 0 - -where: - - * t is the type of the MBus window (as defined by the standard PCI DT - bindings), 1 for I/O and 2 for memory. - - * s is the PCI slot that corresponds to this PCIe interface - - * w is the 'target ID' value for the MBus window - - * a the 'attribute' value for the MBus window. - -Since the location and size of the different MBus windows is not fixed in -hardware, and only determined in runtime, those ranges cover the full first -4 GB of the physical address space, and do not translate into a valid CPU -address. - -In addition, the device tree node must have sub-nodes describing each -PCIe interface, having the following mandatory properties: - -- reg: used only for interrupt mapping, so only the first four bytes - are used to refer to the correct bus number and device number. -- assigned-addresses: reference to the MMIO registers used to control - this PCIe interface. -- clocks: the clock associated to this PCIe interface -- marvell,pcie-port: the physical PCIe port number -- status: either "disabled" or "okay" -- device_type, set to "pci" -- #address-cells, set to <3> -- #size-cells, set to <2> -- #interrupt-cells, set to <1> -- ranges, translating the MBus windows ranges of the parent node into - standard PCI addresses. -- interrupt-map-mask and interrupt-map, standard PCI properties to - define the mapping of the PCIe interface to interrupt numbers. - -and the following optional properties: -- marvell,pcie-lane: the physical PCIe lane number, for ports having - multiple lanes. If this property is not found, we assume that the - value is 0. -- num-lanes: number of SerDes PCIe lanes for this link (1 or 4) -- reset-gpios: optional GPIO to PERST# -- reset-delay-us: delay in us to wait after reset de-assertion, if not - specified will default to 100ms, as required by the PCIe specification. -- interrupt-names: list of interrupt names, supported are: - - "intx" - interrupt line triggered by one of the legacy interrupt -- interrupts or interrupts-extended: List of the interrupt sources which - corresponding to the "interrupt-names". If non-empty then also additional - 'interrupt-controller' subnode must be defined. - -Example: - -pcie-controller { - compatible = "marvell,armada-xp-pcie"; - device_type = "pci"; - - #address-cells = <3>; - #size-cells = <2>; - - bus-range = <0x00 0xff>; - msi-parent = <&mpic>; - - ranges = - <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */ - 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */ - 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */ - 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */ - 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */ - 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */ - 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */ - 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */ - 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */ - 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */ - 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ - 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */ - 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */ - 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */ - 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */ - 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */ - 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */ - 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */ - - 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */ - 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */ - 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */ - 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */ - 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */ - 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */ - 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */ - 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */ - - 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */ - 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */ - - 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */ - 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>; - - pcie@1,0 { - device_type = "pci"; - assigned-addresses = <0x82000800 0 0x40000 0 0x2000>; - reg = <0x0800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 - 0x81000000 0 0 0x81000000 0x1 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 58>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <0>; - num-lanes = <1>; - /* low-active PERST# reset on GPIO 25 */ - reset-gpios = <&gpio0 25 1>; - /* wait 20ms for device settle after reset deassertion */ - reset-delay-us = <20000>; - clocks = <&gateclk 5>; - }; - - pcie@2,0 { - device_type = "pci"; - assigned-addresses = <0x82001000 0 0x44000 0 0x2000>; - reg = <0x1000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0 - 0x81000000 0 0 0x81000000 0x2 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 59>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <1>; - num-lanes = <1>; - clocks = <&gateclk 6>; - }; - - pcie@3,0 { - device_type = "pci"; - assigned-addresses = <0x82001800 0 0x48000 0 0x2000>; - reg = <0x1800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0 - 0x81000000 0 0 0x81000000 0x3 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 60>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <2>; - num-lanes = <1>; - clocks = <&gateclk 7>; - }; - - pcie@4,0 { - device_type = "pci"; - assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>; - reg = <0x2000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0 - 0x81000000 0 0 0x81000000 0x4 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 61>; - marvell,pcie-port = <0>; - marvell,pcie-lane = <3>; - num-lanes = <1>; - clocks = <&gateclk 8>; - }; - - pcie@5,0 { - device_type = "pci"; - assigned-addresses = <0x82002800 0 0x80000 0 0x2000>; - reg = <0x2800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0 - 0x81000000 0 0 0x81000000 0x5 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 62>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <0>; - num-lanes = <1>; - clocks = <&gateclk 9>; - }; - - pcie@6,0 { - device_type = "pci"; - assigned-addresses = <0x82003000 0 0x84000 0 0x2000>; - reg = <0x3000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0 - 0x81000000 0 0 0x81000000 0x6 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 63>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <1>; - num-lanes = <1>; - clocks = <&gateclk 10>; - }; - - pcie@7,0 { - device_type = "pci"; - assigned-addresses = <0x82003800 0 0x88000 0 0x2000>; - reg = <0x3800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0 - 0x81000000 0 0 0x81000000 0x7 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 64>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <2>; - num-lanes = <1>; - clocks = <&gateclk 11>; - }; - - pcie@8,0 { - device_type = "pci"; - assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>; - reg = <0x4000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0 - 0x81000000 0 0 0x81000000 0x8 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 65>; - marvell,pcie-port = <1>; - marvell,pcie-lane = <3>; - num-lanes = <1>; - clocks = <&gateclk 12>; - }; - - pcie@9,0 { - device_type = "pci"; - assigned-addresses = <0x82004800 0 0x42000 0 0x2000>; - reg = <0x4800 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0 - 0x81000000 0 0 0x81000000 0x9 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 99>; - marvell,pcie-port = <2>; - marvell,pcie-lane = <0>; - num-lanes = <1>; - clocks = <&gateclk 26>; - }; - - pcie@a,0 { - device_type = "pci"; - assigned-addresses = <0x82005000 0 0x82000 0 0x2000>; - reg = <0x5000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0 - 0x81000000 0 0 0x81000000 0xa 0 1 0>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &mpic 103>; - marvell,pcie-port = <3>; - marvell,pcie-lane = <0>; - num-lanes = <1>; - clocks = <&gateclk 27>; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml index a24fb8307d29..6d6052a2748f 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie-ep.yaml @@ -74,7 +74,7 @@ properties: reset-gpios: description: Must contain a phandle to a GPIO controller followed by GPIO - that is being used as PERST input signal. Please refer to pci.txt. + that is being used as PERST input signal. phys: minItems: 1 diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt deleted file mode 100644 index ff25a134befa..000000000000 --- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt +++ /dev/null @@ -1,48 +0,0 @@ -* Marvell Armada 7K/8K PCIe interface - -This PCIe host controller is based on the Synopsys DesignWare PCIe IP -and thus inherits all the common properties defined in snps,dw-pcie.yaml. - -Required properties: -- compatible: "marvell,armada8k-pcie" -- reg: must contain two register regions - - the control register region - - the config space region -- reg-names: - - "ctrl" for the control register region - - "config" for the config space region -- interrupts: Interrupt specifier for the PCIe controller -- clocks: reference to the PCIe controller clocks -- clock-names: mandatory if there is a second clock, in this case the - name must be "core" for the first clock and "reg" for the second - one - -Optional properties: -- phys: phandle(s) to PHY node(s) following the generic PHY bindings. - Either 1, 2 or 4 PHYs might be needed depending on the number of - PCIe lanes. -- phy-names: names of the PHYs corresponding to the number of lanes. - Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for - 2 PHYs. - -Example: - - pcie@f2600000 { - compatible = "marvell,armada8k-pcie", "snps,dw-pcie"; - reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>; - reg-names = "ctrl", "config"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - device_type = "pci"; - dma-coherent; - - bus-range = <0 0xff>; - ranges = <0x81000000 0 0xf9000000 0 0xf9000000 0 0x10000 /* downstream I/O */ - 0x82000000 0 0xf6000000 0 0xf6000000 0 0xf00000>; /* non-prefetchable memory */ - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - num-lanes = <1>; - clocks = <&cpm_syscon0 1 13>; - }; diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 214caa4ec3d5..1868a10d5b10 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -51,7 +51,7 @@ properties: max-link-speed: $ref: /schemas/types.yaml#/definitions/uint32 - enum: [ 1, 2, 3, 4 ] + enum: [ 1, 2, 3, 4, 5, 6 ] msi-map: description: | diff --git a/Documentation/devicetree/bindings/pci/pci-iommu.txt b/Documentation/devicetree/bindings/pci/pci-iommu.txt deleted file mode 100644 index 0def586fdcdf..000000000000 --- a/Documentation/devicetree/bindings/pci/pci-iommu.txt +++ /dev/null @@ -1,171 +0,0 @@ -This document describes the generic device tree binding for describing the -relationship between PCI(e) devices and IOMMU(s). - -Each PCI(e) device under a root complex is uniquely identified by its Requester -ID (AKA RID). A Requester ID is a triplet of a Bus number, Device number, and -Function number. - -For the purpose of this document, when treated as a numeric value, a RID is -formatted such that: - -* Bits [15:8] are the Bus number. -* Bits [7:3] are the Device number. -* Bits [2:0] are the Function number. -* Any other bits required for padding must be zero. - -IOMMUs may distinguish PCI devices through sideband data derived from the -Requester ID. While a given PCI device can only master through one IOMMU, a -root complex may split masters across a set of IOMMUs (e.g. with one IOMMU per -bus). - -The generic 'iommus' property is insufficient to describe this relationship, -and a mechanism is required to map from a PCI device to its IOMMU and sideband -data. - -For generic IOMMU bindings, see -Documentation/devicetree/bindings/iommu/iommu.txt. - - -PCI root complex -================ - -Optional properties -------------------- - -- iommu-map: Maps a Requester ID to an IOMMU and associated IOMMU specifier - data. - - The property is an arbitrary number of tuples of - (rid-base,iommu,iommu-base,length). - - Any RID r in the interval [rid-base, rid-base + length) is associated with - the listed IOMMU, with the IOMMU specifier (r - rid-base + iommu-base). - -- iommu-map-mask: A mask to be applied to each Requester ID prior to being - mapped to an IOMMU specifier per the iommu-map property. - - -Example (1) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - iommu: iommu@a { - reg = <0xa 0x1>; - compatible = "vendor,some-iommu"; - #iommu-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to the IOMMU is the RID, - * identity-mapped. - */ - iommu-map = <0x0 &iommu 0x0 0x10000>; - }; -}; - - -Example (2) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - iommu: iommu@a { - reg = <0xa 0x1>; - compatible = "vendor,some-iommu"; - #iommu-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to the IOMMU is the RID with the - * function bits masked out. - */ - iommu-map = <0x0 &iommu 0x0 0x10000>; - iommu-map-mask = <0xfff8>; - }; -}; - - -Example (3) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - iommu: iommu@a { - reg = <0xa 0x1>; - compatible = "vendor,some-iommu"; - #iommu-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to the IOMMU is the RID, - * but the high bits of the bus number are flipped. - */ - iommu-map = <0x0000 &iommu 0x8000 0x8000>, - <0x8000 &iommu 0x0000 0x8000>; - }; -}; - - -Example (4) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - iommu_a: iommu@a { - reg = <0xa 0x1>; - compatible = "vendor,some-iommu"; - #iommu-cells = <1>; - }; - - iommu_b: iommu@b { - reg = <0xb 0x1>; - compatible = "vendor,some-iommu"; - #iommu-cells = <1>; - }; - - iommu_c: iommu@c { - reg = <0xc 0x1>; - compatible = "vendor,some-iommu"; - #iommu-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * Devices with bus number 0-127 are mastered via IOMMU - * a, with sideband data being RID[14:0]. - * Devices with bus number 128-255 are mastered via - * IOMMU b, with sideband data being RID[14:0]. - * No devices master via IOMMU c. - */ - iommu-map = <0x0000 &iommu_a 0x0000 0x8000>, - <0x8000 &iommu_b 0x0000 0x8000>; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/pci-msi.txt b/Documentation/devicetree/bindings/pci/pci-msi.txt deleted file mode 100644 index b73d839657b6..000000000000 --- a/Documentation/devicetree/bindings/pci/pci-msi.txt +++ /dev/null @@ -1,220 +0,0 @@ -This document describes the generic device tree binding for describing the -relationship between PCI devices and MSI controllers. - -Each PCI device under a root complex is uniquely identified by its Requester ID -(AKA RID). A Requester ID is a triplet of a Bus number, Device number, and -Function number. - -For the purpose of this document, when treated as a numeric value, a RID is -formatted such that: - -* Bits [15:8] are the Bus number. -* Bits [7:3] are the Device number. -* Bits [2:0] are the Function number. -* Any other bits required for padding must be zero. - -MSIs may be distinguished in part through the use of sideband data accompanying -writes. In the case of PCI devices, this sideband data may be derived from the -Requester ID. A mechanism is required to associate a device with both the MSI -controllers it can address, and the sideband data that will be associated with -its writes to those controllers. - -For generic MSI bindings, see -Documentation/devicetree/bindings/interrupt-controller/msi.txt. - - -PCI root complex -================ - -Optional properties -------------------- - -- msi-map: Maps a Requester ID to an MSI controller and associated - msi-specifier data. The property is an arbitrary number of tuples of - (rid-base,msi-controller,msi-base,length), where: - - * rid-base is a single cell describing the first RID matched by the entry. - - * msi-controller is a single phandle to an MSI controller - - * msi-base is an msi-specifier describing the msi-specifier produced for the - first RID matched by the entry. - - * length is a single cell describing how many consecutive RIDs are matched - following the rid-base. - - Any RID r in the interval [rid-base, rid-base + length) is associated with - the listed msi-controller, with the msi-specifier (r - rid-base + msi-base). - -- msi-map-mask: A mask to be applied to each Requester ID prior to being mapped - to an msi-specifier per the msi-map property. - -- msi-parent: Describes the MSI parent of the root complex itself. Where - the root complex and MSI controller do not pass sideband data with MSI - writes, this property may be used to describe the MSI controller(s) - used by PCI devices under the root complex, if defined as such in the - binding for the root complex. - - -Example (1) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - msi: msi-controller@a { - reg = <0xa 0x1>; - compatible = "vendor,some-controller"; - msi-controller; - #msi-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to the MSI controller is - * the RID, identity-mapped. - */ - msi-map = <0x0 &msi_a 0x0 0x10000>, - }; -}; - - -Example (2) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - msi: msi-controller@a { - reg = <0xa 0x1>; - compatible = "vendor,some-controller"; - msi-controller; - #msi-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to the MSI controller is - * the RID, masked to only the device and function bits. - */ - msi-map = <0x0 &msi_a 0x0 0x100>, - msi-map-mask = <0xff> - }; -}; - - -Example (3) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - msi: msi-controller@a { - reg = <0xa 0x1>; - compatible = "vendor,some-controller"; - msi-controller; - #msi-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to the MSI controller is - * the RID, but the high bit of the bus number is - * ignored. - */ - msi-map = <0x0000 &msi 0x0000 0x8000>, - <0x8000 &msi 0x0000 0x8000>; - }; -}; - - -Example (4) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - msi: msi-controller@a { - reg = <0xa 0x1>; - compatible = "vendor,some-controller"; - msi-controller; - #msi-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to the MSI controller is - * the RID, but the high bit of the bus number is - * negated. - */ - msi-map = <0x0000 &msi 0x8000 0x8000>, - <0x8000 &msi 0x0000 0x8000>; - }; -}; - - -Example (5) -=========== - -/ { - #address-cells = <1>; - #size-cells = <1>; - - msi_a: msi-controller@a { - reg = <0xa 0x1>; - compatible = "vendor,some-controller"; - msi-controller; - #msi-cells = <1>; - }; - - msi_b: msi-controller@b { - reg = <0xb 0x1>; - compatible = "vendor,some-controller"; - msi-controller; - #msi-cells = <1>; - }; - - msi_c: msi-controller@c { - reg = <0xc 0x1>; - compatible = "vendor,some-controller"; - msi-controller; - #msi-cells = <1>; - }; - - pci: pci@f { - reg = <0xf 0x1>; - compatible = "vendor,pcie-root-complex"; - device_type = "pci"; - - /* - * The sideband data provided to MSI controller a is the - * RID, but the high bit of the bus number is negated. - * The sideband data provided to MSI controller b is the - * RID, identity-mapped. - * MSI controller c is not addressable. - */ - msi-map = <0x0000 &msi_a 0x8000 0x08000>, - <0x8000 &msi_a 0x0000 0x08000>, - <0x0000 &msi_b 0x0000 0x10000>; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/pci.txt b/Documentation/devicetree/bindings/pci/pci.txt deleted file mode 100644 index 6a8f2874a24d..000000000000 --- a/Documentation/devicetree/bindings/pci/pci.txt +++ /dev/null @@ -1,84 +0,0 @@ -PCI bus bridges have standardized Device Tree bindings: - -PCI Bus Binding to: IEEE Std 1275-1994 -https://www.devicetree.org/open-firmware/bindings/pci/pci2_1.pdf - -And for the interrupt mapping part: - -Open Firmware Recommended Practice: Interrupt Mapping -https://www.devicetree.org/open-firmware/practice/imap/imap0_9d.pdf - -Additionally to the properties specified in the above standards a host bridge -driver implementation may support the following properties: - -- linux,pci-domain: - If present this property assigns a fixed PCI domain number to a host bridge, - otherwise an unstable (across boots) unique number will be assigned. - It is required to either not set this property at all or set it for all - host bridges in the system, otherwise potentially conflicting domain numbers - may be assigned to root buses behind different host bridges. The domain - number for each host bridge in the system must be unique. -- max-link-speed: - If present this property specifies PCI gen for link capability. Host - drivers could add this as a strategy to avoid unnecessary operation for - unsupported link speed, for instance, trying to do training for - unsupported link speed, etc. Must be '4' for gen4, '3' for gen3, '2' - for gen2, and '1' for gen1. Any other values are invalid. -- reset-gpios: - If present this property specifies PERST# GPIO. Host drivers can parse the - GPIO and apply fundamental reset to endpoints. -- supports-clkreq: - If present this property specifies that CLKREQ signal routing exists from - root port to downstream device and host bridge drivers can do programming - which depends on CLKREQ signal existence. For example, programming root port - not to advertise ASPM L1 Sub-States support if there is no CLKREQ signal. - -PCI-PCI Bridge properties -------------------------- - -PCIe root ports and switch ports may be described explicitly in the device -tree, as children of the host bridge node. Even though those devices are -discoverable by probing, it might be necessary to describe properties that -aren't provided by standard PCIe capabilities. - -Required properties: - -- reg: - Identifies the PCI-PCI bridge. As defined in the IEEE Std 1275-1994 - document, it is a five-cell address encoded as (phys.hi phys.mid - phys.lo size.hi size.lo). phys.hi should contain the device's BDF as - 0b00000000 bbbbbbbb dddddfff 00000000. The other cells should be zero. - - The bus number is defined by firmware, through the standard bridge - configuration mechanism. If this port is a switch port, then firmware - allocates the bus number and writes it into the Secondary Bus Number - register of the bridge directly above this port. Otherwise, the bus - number of a root port is the first number in the bus-range property, - defaulting to zero. - - If firmware leaves the ARI Forwarding Enable bit set in the bridge - above this port, then phys.hi contains the 8-bit function number as - 0b00000000 bbbbbbbb ffffffff 00000000. Note that the PCIe specification - recommends that firmware only leaves ARI enabled when it knows that the - OS is ARI-aware. - -Optional properties: - -- external-facing: - When present, the port is external-facing. All bridges and endpoints - downstream of this port are external to the machine. The OS can, for - example, use this information to identify devices that cannot be - trusted with relaxed DMA protection, as users could easily attach - malicious devices to this port. - -Example: - -pcie@10000000 { - compatible = "pci-host-ecam-generic"; - ... - pcie@0008 { - /* Root port 00:01.0 is external-facing */ - reg = <0x00000800 0 0 0 0>; - external-facing; - }; -}; diff --git a/Documentation/devicetree/bindings/pci/pcie-al.txt b/Documentation/devicetree/bindings/pci/pcie-al.txt deleted file mode 100644 index 2ad1fe466eab..000000000000 --- a/Documentation/devicetree/bindings/pci/pcie-al.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Amazon Annapurna Labs PCIe host bridge - -Amazon's Annapurna Labs PCIe Host Controller is based on the Synopsys DesignWare -PCI core. It inherits common properties defined in -Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. - -Properties of the host controller node that differ from it are: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: Value should contain - - "amazon,al-alpine-v2-pcie" for alpine_v2 - - "amazon,al-alpine-v3-pcie" for alpine_v3 - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: Register ranges as listed in the reg-names property - -- reg-names: - Usage: required - Value type: <stringlist> - Definition: Must include the following entries - - "config" PCIe ECAM space - - "controller" AL proprietary registers - - "dbi" Designware PCIe registers - -Example: - - pcie-external0: pcie@fb600000 { - compatible = "amazon,al-alpine-v3-pcie"; - reg = <0x0 0xfb600000 0x0 0x00100000 - 0x0 0xfd800000 0x0 0x00010000 - 0x0 0xfd810000 0x0 0x00001000>; - reg-names = "config", "controller", "dbi"; - bus-range = <0 255>; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; - interrupt-map-mask = <0x00 0 0 7>; - interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; /* INTa */ - ranges = <0x02000000 0x0 0xc0010000 0x0 0xc0010000 0x0 0x07ff0000>; - }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml index 0480c58f7d99..ab2509ec1c4b 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml @@ -51,10 +51,18 @@ properties: phys: maxItems: 1 + deprecated: true + description: + This property is deprecated, instead of referencing this property from + the host bridge node, use the property from the PCIe root port node. phy-names: items: - const: pciephy + deprecated: true + description: + Phandle to the register map node. This property is deprecated, and not + required to add in the root port also, as the root port has only one phy. power-domains: maxItems: 1 @@ -71,12 +79,18 @@ properties: maxItems: 12 perst-gpios: - description: GPIO controlled connection to PERST# signal + description: GPIO controlled connection to PERST# signal. This property is + deprecated, instead of referencing this property from the host bridge node, + use the reset-gpios property from the root port node. maxItems: 1 + deprecated: true wake-gpios: - description: GPIO controlled connection to WAKE# signal + description: GPIO controlled connection to WAKE# signal. This property is + deprecated, instead of referencing this property from the host bridge node, + use the property from the PCIe root port node. maxItems: 1 + deprecated: true vddpe-3v3-supply: description: PCIe endpoint power supply @@ -85,6 +99,20 @@ properties: opp-table: type: object +patternProperties: + "^pcie@": + type: object + $ref: /schemas/pci/pci-pci-bridge.yaml# + + properties: + reg: + maxItems: 1 + + phys: + maxItems: 1 + + unevaluatedProperties: false + required: - reg - reg-names diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml new file mode 100644 index 000000000000..ef705a02fcd9 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8255p.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8255p.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SA8255p based firmware managed and ECAM compliant PCIe Root Complex + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + Qualcomm SA8255p SoC PCIe root complex controller is based on the Synopsys + DesignWare PCIe IP which is managed by firmware, and configured in ECAM mode. + +properties: + compatible: + const: qcom,pcie-sa8255p + + reg: + description: + The base address and size of the ECAM area for accessing PCI + Configuration Space, as accessed from the parent bus. The base + address corresponds to the first bus in the "bus-range" property. If + no "bus-range" is specified, this will be bus 0 (the default). + maxItems: 1 + + ranges: + description: + As described in IEEE Std 1275-1994, but must provide at least a + definition of non-prefetchable memory. One or both of prefetchable Memory + may also be provided. + minItems: 1 + maxItems: 2 + + interrupts: + minItems: 8 + maxItems: 8 + + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + + power-domains: + maxItems: 1 + + dma-coherent: true + iommu-map: true + +required: + - compatible + - reg + - ranges + - power-domains + - interrupts + - interrupt-names + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pci@1c00000 { + compatible = "qcom,pcie-sa8255p"; + reg = <0x4 0x00000000 0 0x10000000>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x02000000 0x0 0x40100000 0x0 0x40100000 0x0 0x1ff00000>, + <0x43000000 0x4 0x10100000 0x4 0x10100000 0x0 0x40000000>; + bus-range = <0x00 0xff>; + dma-coherent; + linux,pci-domain = <0>; + power-domains = <&scmi5_pd 0>; + iommu-map = <0x0 &pcie_smmu 0x0000 0x1>, + <0x100 &pcie_smmu 0x0001 0x1>; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi0", "msi1", "msi2", "msi3", + "msi4", "msi5", "msi6", "msi7"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml index efde49d1bef8..19afe2a03409 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml @@ -16,7 +16,12 @@ description: properties: compatible: - const: qcom,pcie-sa8775p + oneOf: + - const: qcom,pcie-sa8775p + - items: + - enum: + - qcom,pcie-qcs8300 + - const: qcom,pcie-sa8775p reg: minItems: 6 @@ -45,9 +50,10 @@ properties: interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -57,13 +63,17 @@ properties: - const: msi5 - const: msi6 - const: msi7 + - const: global resets: - maxItems: 1 + items: + - description: PCIe controller reset + - description: PCIe link down reset reset-names: items: - const: pci + - const: link_down required: - interconnects @@ -129,7 +139,8 @@ examples: <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -137,7 +148,8 @@ examples: "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, @@ -157,8 +169,10 @@ examples: power-domains = <&gcc PCIE_0_GDSC>; - resets = <&gcc GCC_PCIE_0_BCR>; - reset-names = "pci"; + resets = <&gcc GCC_PCIE_0_BCR>, + <&gcc GCC_PCIE_0_LINK_DOWN_BCR>; + reset-names = "pci", + "link_down"; perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml index 76cb9fbfd476..4d0a91556603 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc7280.yaml @@ -54,9 +54,10 @@ properties: interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -66,6 +67,7 @@ properties: - const: msi5 - const: msi6 - const: msi7 + - const: global resets: maxItems: 1 @@ -149,9 +151,10 @@ examples: <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + "msi4", "msi5", "msi6", "msi7", "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, @@ -162,9 +165,6 @@ examples: iommu-map = <0x0 &apps_smmu 0x1c80 0x1>, <0x100 &apps_smmu 0x1c81 0x1>; - phys = <&pcie1_phy>; - phy-names = "pciephy"; - pinctrl-names = "default"; pinctrl-0 = <&pcie1_clkreq_n>; @@ -173,7 +173,18 @@ examples: resets = <&gcc GCC_PCIE_1_BCR>; reset-names = "pci"; - perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; vddpe-3v3-supply = <&pp3300_ssd>; + pcie1_port0: pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + phys = <&pcie1_phy>; + + reset-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + }; }; }; diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml index baf1813ec0ac..34a4d7b2c845 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml @@ -33,8 +33,8 @@ properties: - const: mhi # MHI registers clocks: - minItems: 8 - maxItems: 8 + minItems: 6 + maxItems: 6 clock-names: items: @@ -44,14 +44,13 @@ properties: - const: bus_master # Master AXI clock - const: bus_slave # Slave AXI clock - const: slave_q2a # Slave Q2A clock - - const: ref # REFERENCE clock - - const: tbu # PCIe TBU clock interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -61,6 +60,7 @@ properties: - const: msi5 - const: msi6 - const: msi7 + - const: global resets: maxItems: 1 @@ -115,17 +115,13 @@ examples: <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_PCIE_0_CLKREF_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "ref", - "tbu"; + "slave_q2a"; dma-coherent; @@ -136,7 +132,8 @@ examples: <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", @@ -144,7 +141,8 @@ examples: "msi4", "msi5", "msi6", - "msi7"; + "msi7", + "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml index 9d569644fda9..26b247a41785 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8150.yaml @@ -16,7 +16,12 @@ description: properties: compatible: - const: qcom,pcie-sm8150 + oneOf: + - const: qcom,pcie-sm8150 + - items: + - enum: + - qcom,pcie-qcs615 + - const: qcom,pcie-sm8150 reg: minItems: 5 @@ -33,8 +38,8 @@ properties: - const: mhi # MHI registers clocks: - minItems: 8 - maxItems: 8 + minItems: 6 + maxItems: 6 clock-names: items: @@ -44,14 +49,13 @@ properties: - const: bus_master # Master AXI clock - const: bus_slave # Slave AXI clock - const: slave_q2a # Slave Q2A clock - - const: tbu # PCIe TBU clock - - const: ref # REFERENCE clock interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -61,6 +65,7 @@ properties: - const: msi5 - const: msi6 - const: msi7 + - const: global resets: maxItems: 1 @@ -109,17 +114,13 @@ examples: <&gcc GCC_PCIE_0_CFG_AHB_CLK>, <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, <&gcc GCC_PCIE_0_SLV_AXI_CLK>, - <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>, - <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>, - <&rpmhcc RPMH_CXO_CLK>; + <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>; clock-names = "pipe", "aux", "cfg", "bus_master", "bus_slave", - "slave_q2a", - "tbu", - "ref"; + "slave_q2a"; interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, @@ -128,9 +129,10 @@ examples: <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + "msi4", "msi5", "msi6", "msi7", "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml index 4d060bce6f9d..af4dae68d508 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8250.yaml @@ -61,9 +61,10 @@ properties: interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -73,6 +74,7 @@ properties: - const: msi5 - const: msi6 - const: msi7 + - const: global resets: maxItems: 1 @@ -143,9 +145,10 @@ examples: <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + "msi4", "msi5", "msi6", "msi7", "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml index 2a4cc41fc710..dde3079adbb3 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sm8350.yaml @@ -51,9 +51,10 @@ properties: interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -63,6 +64,7 @@ properties: - const: msi5 - const: msi6 - const: msi7 + - const: global resets: maxItems: 1 @@ -132,9 +134,10 @@ examples: <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "msi0", "msi1", "msi2", "msi3", - "msi4", "msi5", "msi6", "msi7"; + "msi4", "msi5", "msi6", "msi7", "global"; #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml index 8f628939209e..0e1808105a81 100644 --- a/Documentation/devicetree/bindings/pci/qcom,pcie.yaml +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.yaml @@ -21,6 +21,7 @@ properties: - qcom,pcie-apq8064 - qcom,pcie-apq8084 - qcom,pcie-ipq4019 + - qcom,pcie-ipq5018 - qcom,pcie-ipq6018 - qcom,pcie-ipq8064 - qcom,pcie-ipq8064-v2 @@ -168,6 +169,7 @@ allOf: compatible: contains: enum: + - qcom,pcie-ipq5018 - qcom,pcie-ipq6018 - qcom,pcie-ipq8074-gen3 - qcom,pcie-ipq9574 @@ -175,14 +177,16 @@ allOf: properties: reg: minItems: 5 - maxItems: 5 + maxItems: 6 reg-names: + minItems: 5 items: - const: dbi # DesignWare PCIe registers - const: elbi # External local bus interface registers - const: atu # ATU address space - const: parf # Qualcomm specific registers - const: config # PCIe configuration space + - const: mhi # MHI registers - if: properties: @@ -327,6 +331,53 @@ allOf: compatible: contains: enum: + - qcom,pcie-ipq5018 + then: + properties: + clocks: + minItems: 6 + maxItems: 6 + clock-names: + items: + - const: iface # PCIe to SysNOC BIU clock + - const: axi_m # AXI Master clock + - const: axi_s # AXI Slave clock + - const: ahb # AHB clock + - const: aux # Auxiliary clock + - const: axi_bridge # AXI bridge clock + resets: + minItems: 8 + maxItems: 8 + reset-names: + items: + - const: pipe # PIPE reset + - const: sleep # Sleep reset + - const: sticky # Core sticky reset + - const: axi_m # AXI master reset + - const: axi_s # AXI slave reset + - const: ahb # AHB reset + - const: axi_m_sticky # AXI master sticky reset + - const: axi_s_sticky # AXI slave sticky reset + interrupts: + minItems: 9 + maxItems: 9 + interrupt-names: + items: + - const: msi0 + - const: msi1 + - const: msi2 + - const: msi3 + - const: msi4 + - const: msi5 + - const: msi6 + - const: msi7 + - const: global + + - if: + properties: + compatible: + contains: + enum: - qcom,pcie-msm8996 then: properties: @@ -562,6 +613,7 @@ allOf: enum: - qcom,pcie-apq8064 - qcom,pcie-ipq4019 + - qcom,pcie-ipq5018 - qcom,pcie-ipq8064 - qcom,pcie-ipq8064v2 - qcom,pcie-ipq8074 @@ -589,7 +641,11 @@ allOf: compatible: contains: enum: + - qcom,pcie-ipq6018 + - qcom,pcie-ipq8074 + - qcom,pcie-ipq8074-gen3 - qcom,pcie-msm8996 + - qcom,pcie-msm8998 - qcom,pcie-sdm845 then: oneOf: @@ -602,8 +658,9 @@ allOf: - properties: interrupts: minItems: 8 - maxItems: 8 + maxItems: 9 interrupt-names: + minItems: 8 items: - const: msi0 - const: msi1 @@ -613,6 +670,7 @@ allOf: - const: msi5 - const: msi6 - const: msi7 + - const: global - if: properties: @@ -622,11 +680,8 @@ allOf: - qcom,pcie-apq8064 - qcom,pcie-apq8084 - qcom,pcie-ipq4019 - - qcom,pcie-ipq6018 - qcom,pcie-ipq8064 - qcom,pcie-ipq8064-v2 - - qcom,pcie-ipq8074 - - qcom,pcie-ipq8074-gen3 - qcom,pcie-qcs404 then: properties: diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml index 32a3b7665ff5..6b91581c30ae 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-ep.yaml @@ -73,21 +73,21 @@ examples: #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/r8a774c0-sysc.h> - pcie0_ep: pcie-ep@fe000000 { - compatible = "renesas,r8a774c0-pcie-ep", - "renesas,rcar-gen3-pcie-ep"; - reg = <0xfe000000 0x80000>, - <0xfe100000 0x100000>, - <0xfe200000 0x200000>, - <0x30000000 0x8000000>, - <0x38000000 0x8000000>; - reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - resets = <&cpg 319>; - power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; - clocks = <&cpg CPG_MOD 319>; - clock-names = "pcie"; - max-functions = /bits/ 8 <1>; + pcie0_ep: pcie-ep@fe000000 { + compatible = "renesas,r8a774c0-pcie-ep", + "renesas,rcar-gen3-pcie-ep"; + reg = <0xfe000000 0x80000>, + <0xfe100000 0x100000>, + <0xfe200000 0x200000>, + <0x30000000 0x8000000>, + <0x38000000 0x8000000>; + reg-names = "apb-base", "memory0", "memory1", "memory2", "memory3"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cpg 319>; + power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>; + clocks = <&cpg CPG_MOD 319>; + clock-names = "pcie"; + max-functions = /bits/ 8 <1>; }; diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml index 666f013e3af8..7896576920aa 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -113,27 +113,27 @@ examples: pcie: pcie@fe000000 { compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; - #address-cells = <3>; - #size-cells = <2>; - bus-range = <0x00 0xff>; - device_type = "pci"; - ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, - <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, - <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, - <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; - dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>, - <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>; - interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; - clock-names = "pcie", "pcie_bus"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - resets = <&cpg 319>; - vpcie3v3-supply = <&pcie_3v3>; - vpcie12v-supply = <&pcie_12v>; - }; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000>, + <0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000>, + <0x02000000 0 0x30000000 0 0x30000000 0 0x08000000>, + <0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>, + <0x42000000 2 0x00000000 2 0x00000000 0 0x40000000>; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 319>; + vpcie3v3-supply = <&pcie_3v3>; + vpcie12v-supply = <&pcie_12v>; + }; }; diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml index cc9adfc7611c..fde9b87508b3 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie-common.yaml @@ -65,7 +65,11 @@ properties: tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, nf_err_rx, f_err_rx, radm_qoverflow - description: - eDMA write channel 0 interrupt + If the matching interrupt name is "msi", then this is the combined + MSI line interrupt, which is to support MSI interrupts output to GIC + controller via GIC SPI interrupt instead of GIC ITS interrupt. + If the matching interrupt name is "dma0", then this is the eDMA write + channel 0 interrupt. - description: eDMA write channel 1 interrupt - description: @@ -81,7 +85,9 @@ properties: - const: msg - const: legacy - const: err - - const: dma0 + - enum: + - msi + - dma0 - const: dma1 - const: dma2 - const: dma3 diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml index 550d8a684af3..6c6d828ce964 100644 --- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -16,16 +16,14 @@ description: |+ PCIe IP and thus inherits all the common properties defined in snps,dw-pcie.yaml. -allOf: - - $ref: /schemas/pci/snps,dw-pcie.yaml# - - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml# - properties: compatible: oneOf: - const: rockchip,rk3568-pcie - items: - enum: + - rockchip,rk3562-pcie + - rockchip,rk3576-pcie - rockchip,rk3588-pcie - const: rockchip,rk3568-pcie @@ -71,8 +69,58 @@ properties: vpcie3v3-supply: true -required: - - msi-map +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + - $ref: /schemas/pci/rockchip-dw-pcie-common.yaml# + - if: + not: + properties: + compatible: + contains: + enum: + - rockchip,rk3562-pcie + - rockchip,rk3576-pcie + then: + required: + - msi-map + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3562-pcie + - rockchip,rk3576-pcie + then: + properties: + interrupts: + minItems: 6 + maxItems: 6 + interrupt-names: + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + - const: msi + else: + properties: + interrupts: + minItems: 5 + interrupt-names: + minItems: 5 + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + - const: dma0 + - const: dma1 + - const: dma2 + - const: dma3 + unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml index 844fc7142302..d35ff807936b 100644 --- a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml @@ -81,10 +81,10 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/sifive-fu740-prci.h> bus { #address-cells = <2>; #size-cells = <2>; - #include <dt-bindings/clock/sifive-fu740-prci.h> pcie@e00000000 { compatible = "sifive,fu740-pcie"; diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml index dc05761c5cf9..34594972d8db 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml @@ -115,7 +115,7 @@ properties: above for new bindings. oneOf: - description: See native 'dbi' clock for details - enum: [ pcie, pcie_apb_sys, aclk_dbi ] + enum: [ pcie, pcie_apb_sys, aclk_dbi, reg ] - description: See native 'mstr/slv' clock for details enum: [ pcie_bus, pcie_inbound_axi, pcie_aclk, aclk_mst, aclk_slv ] - description: See native 'pipe' clock for details @@ -201,6 +201,7 @@ properties: oneOf: - pattern: '^pcie(-?phy[0-9]*)?$' - pattern: '^p2u-[0-7]$' + - pattern: '^cp[01]-pcie[0-2]-x[124](-lane[0-3])?-phy$' # marvell,armada8k-pcie reset-gpio: deprecated: true diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml index 1117a86fb6f7..b3216141881c 100644 --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml @@ -105,8 +105,10 @@ properties: Vendor-specific CSR names. Consider using the generic names above for new bindings. oneOf: + - description: See native 'dbi' CSR region for details. + enum: [ ctrl ] - description: See native 'elbi/app' CSR region for details. - enum: [ apb, mgmt, link, ulreg, appl ] + enum: [ apb, mgmt, link, ulreg, appl, controller ] - description: See native 'atu' CSR region for details. enum: [ atu_dma ] - description: Syscon-related CSR regions. @@ -117,7 +119,7 @@ properties: const: slcr allOf: - contains: - const: dbi + enum: [ dbi, ctrl ] - contains: const: config diff --git a/Documentation/devicetree/bindings/pci/sophgo,sg2044-pcie.yaml b/Documentation/devicetree/bindings/pci/sophgo,sg2044-pcie.yaml new file mode 100644 index 000000000000..ff1133bae3ba --- /dev/null +++ b/Documentation/devicetree/bindings/pci/sophgo,sg2044-pcie.yaml @@ -0,0 +1,122 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/sophgo,sg2044-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe Root Complex controller on Sophgo SoCs + +maintainers: + - Inochi Amaoto <inochiama@gmail.com> + +description: + SG2044 SoC PCIe Root Complex controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + const: sophgo,sg2044-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers + - description: iATU registers + - description: Config registers + - description: Sophgo designed configuration registers + + reg-names: + items: + - const: dbi + - const: atu + - const: config + - const: app + + clocks: + items: + - description: core clk + + clock-names: + items: + - const: core + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + items: + - description: combined legacy interrupt + + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + - interrupts + + additionalProperties: false + + msi-parent: true + + ranges: + maxItems: 5 + +required: + - compatible + - reg + - clocks + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@6c00400000 { + compatible = "sophgo,sg2044-pcie"; + reg = <0x6c 0x00400000 0x0 0x00001000>, + <0x6c 0x00700000 0x0 0x00004000>, + <0x40 0x00000000 0x0 0x00001000>, + <0x6c 0x00780c00 0x0 0x00000400>; + reg-names = "dbi", "atu", "config", "app"; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + clocks = <&clk 0>; + clock-names = "core"; + device_type = "pci"; + linux,pci-domain = <0>; + msi-parent = <&msi>; + ranges = <0x01000000 0x0 0x00000000 0x40 0x10000000 0x0 0x00200000>, + <0x42000000 0x0 0x00000000 0x0 0x00000000 0x0 0x04000000>, + <0x02000000 0x0 0x04000000 0x0 0x04000000 0x0 0x04000000>, + <0x43000000 0x42 0x00000000 0x42 0x00000000 0x2 0x00000000>, + <0x03000000 0x41 0x00000000 0x41 0x00000000 0x1 0x00000000>; + + interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent = <&intc>; + interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt deleted file mode 100644 index d5a14f5dad46..000000000000 --- a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt +++ /dev/null @@ -1,14 +0,0 @@ -SPEAr13XX PCIe DT detail: -================================ - -SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY -controller. - -Required properties: -- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". -- phys : phandle to PHY node associated with PCIe controller -- phy-names : must be "pcie-phy" -- All other definitions as per generic PCI bindings - - Optional properties: -- st,pcie-is-gen1 indicates that forced gen1 initialization is needed. diff --git a/Documentation/devicetree/bindings/pci/st,spear1340-pcie.yaml b/Documentation/devicetree/bindings/pci/st,spear1340-pcie.yaml new file mode 100644 index 000000000000..784f97b3cb7a --- /dev/null +++ b/Documentation/devicetree/bindings/pci/st,spear1340-pcie.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/st,spear1340-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ST SPEAr1340 PCIe controller + +maintainers: + - Pratyush Anand <pratyush.anand@gmail.com> + +description: + SPEAr13XX uses the Synopsys DesignWare PCIe controller and ST MiPHY as PHY + controller. + +select: + properties: + compatible: + contains: + const: st,spear1340-pcie + required: + - compatible + +properties: + compatible: + items: + - const: st,spear1340-pcie + - const: snps,dw-pcie + + phys: + maxItems: 1 + + st,pcie-is-gen1: + type: boolean + description: Indicates forced gen1 initialization is needed. + +required: + - compatible + - phys + - phy-names + +allOf: + - $ref: snps,dw-pcie.yaml# + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index 97f2579ea908..29580cbd1767 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -123,21 +123,21 @@ examples: #size-cells = <2>; pcie0_ep: pcie-ep@d000000 { - compatible = "ti,j721e-pcie-ep"; - reg = <0x00 0x02900000 0x00 0x1000>, - <0x00 0x02907000 0x00 0x400>, - <0x00 0x0d000000 0x00 0x00800000>, - <0x00 0x10000000 0x00 0x08000000>; - reg-names = "intd_cfg", "user_cfg", "reg", "mem"; - ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; - max-link-speed = <3>; - num-lanes = <2>; - power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; - clocks = <&k3_clks 239 1>; - clock-names = "fck"; - max-functions = /bits/ 8 <6>; - dma-coherent; - phys = <&serdes0_pcie_link>; - phy-names = "pcie-phy"; - }; + compatible = "ti,j721e-pcie-ep"; + reg = <0x00 0x02900000 0x00 0x1000>, + <0x00 0x02907000 0x00 0x400>, + <0x00 0x0d000000 0x00 0x00800000>, + <0x00 0x10000000 0x00 0x08000000>; + reg-names = "intd_cfg", "user_cfg", "reg", "mem"; + ti,syscon-pcie-ctrl = <&pcie0_ctrl 0x4070>; + max-link-speed = <3>; + num-lanes = <2>; + power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 239 1>; + clock-names = "fck"; + max-functions = /bits/ 8 <6>; + dma-coherent; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + }; }; diff --git a/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml b/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml new file mode 100644 index 000000000000..38cac88f17bf --- /dev/null +++ b/Documentation/devicetree/bindings/pci/v3,v360epc-pci.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/v3,v360epc-pci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: V3 Semiconductor V360 EPC PCI bridge + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + This bridge is found in the ARM Integrator/AP (Application Platform) + +allOf: + - $ref: /schemas/pci/pci-host-bridge.yaml# + +properties: + compatible: + items: + - const: arm,integrator-ap-pci + - const: v3,v360epc-pci + + reg: + items: + - description: V3 host bridge controller + - description: Configuration space + + clocks: + maxItems: 1 + + dma-ranges: + maxItems: 2 + description: + The inbound ranges must be aligned to a 1MB boundary, and may be 1MB, 2MB, + 4MB, 8MB, 16MB, 32MB, 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The + memory should be marked as pre-fetchable. + + interrupts: + description: Bus Error IRQ + maxItems: 1 + + ranges: + description: + The non-prefetchable and prefetchable memory windows must each be exactly + 256MB (0x10000000) in size. The prefetchable memory window must be + immediately adjacent to the non-prefetchable memory window. + +required: + - compatible + - reg + - clocks + - dma-ranges + - "#interrupt-cells" + - interrupt-map + - interrupt-map-mask + +unevaluatedProperties: false + +examples: + - | + pci@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + device_type = "pci"; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + ranges = <0x01000000 0 0x00000000 0x60000000 0 0x01000000>, /* 16 MiB @ LB 60000000 */ + <0x02000000 0 0x40000000 0x40000000 0 0x10000000>, /* 256 MiB @ LB 40000000 1:1 */ + <0x42000000 0 0x50000000 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 0x20000000 0 0x20000000>, /* EBI: 512 MB @ LB 20000000 1:1 */ + <0x02000000 0 0x80000000 0x80000000 0 0x40000000>; /* CM alias: 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = + /* IDSEL 9 */ + <0x4800 0 0 1 &pic 13>, /* INT A on slot 9 is irq 13 */ + <0x4800 0 0 2 &pic 14>, /* INT B on slot 9 is irq 14 */ + <0x4800 0 0 3 &pic 15>, /* INT C on slot 9 is irq 15 */ + <0x4800 0 0 4 &pic 16>, /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + <0x5000 0 0 1 &pic 14>, /* INT A on slot 10 is irq 14 */ + <0x5000 0 0 2 &pic 15>, /* INT B on slot 10 is irq 15 */ + <0x5000 0 0 3 &pic 16>, /* INT C on slot 10 is irq 16 */ + <0x5000 0 0 4 &pic 13>, /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + <0x5800 0 0 1 &pic 15>, /* INT A on slot 11 is irq 15 */ + <0x5800 0 0 2 &pic 16>, /* INT B on slot 11 is irq 16 */ + <0x5800 0 0 3 &pic 13>, /* INT C on slot 11 is irq 13 */ + <0x5800 0 0 4 &pic 14>, /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + <0x6000 0 0 1 &pic 16>, /* INT A on slot 12 is irq 16 */ + <0x6000 0 0 2 &pic 13>, /* INT B on slot 12 is irq 13 */ + <0x6000 0 0 3 &pic 14>, /* INT C on slot 12 is irq 14 */ + <0x6000 0 0 4 &pic 15>; /* INT D on slot 12 is irq 15 */ + }; +... diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt deleted file mode 100644 index 11063293f761..000000000000 --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +++ /dev/null @@ -1,76 +0,0 @@ -V3 Semiconductor V360 EPC PCI bridge - -This bridge is found in the ARM Integrator/AP (Application Platform) - -Required properties: -- compatible: should be one of: - "v3,v360epc-pci" - "arm,integrator-ap-pci", "v3,v360epc-pci" -- reg: should contain two register areas: - first the base address of the V3 host bridge controller, 64KB - second the configuration area register space, 16MB -- interrupts: should contain a reference to the V3 error interrupt - as routed on the system. -- bus-range: see pci.txt -- ranges: this follows the standard PCI bindings in the IEEE Std - 1275-1994 (see pci.txt) with the following restriction: - - The non-prefetchable and prefetchable memory windows must - each be exactly 256MB (0x10000000) in size. - - The prefetchable memory window must be immediately adjacent - to the non-prefetcable memory window -- dma-ranges: three ranges for the inbound memory region. The ranges must - be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, - 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked - as pre-fetchable. Two ranges are supported by the hardware. - -Integrator-specific required properties: -- syscon: should contain a link to the syscon device node, since - on the Integrator, some registers in the syscon are required to - operate the V3 host bridge. - -Example: - -pci: pciv3@62000000 { - compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; - interrupt-parent = <&pic>; - interrupts = <17>; /* Bus error IRQ */ - clocks = <&pciclk>; - bus-range = <0x00 0xff>; - ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ - 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ - 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ - 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ - 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ - 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ - dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ - 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ - 0x02000000 0 0x80000000 /* Core module alias memory */ - 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ - interrupt-map-mask = <0xf800 0 0 0x7>; - interrupt-map = < - /* IDSEL 9 */ - 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ - 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ - 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ - 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ - /* IDSEL 10 */ - 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ - 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ - 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ - 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ - /* IDSEL 11 */ - 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ - 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ - 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ - 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ - /* IDSEL 12 */ - 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ - 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ - 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ - 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ - >; -}; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt b/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt deleted file mode 100644 index 85d9b95234f7..000000000000 --- a/Documentation/devicetree/bindings/pci/xgene-pci-msi.txt +++ /dev/null @@ -1,68 +0,0 @@ -* AppliedMicro X-Gene v1 PCIe MSI controller - -Required properties: - -- compatible: should be "apm,xgene1-msi" to identify - X-Gene v1 PCIe MSI controller block. -- msi-controller: indicates that this is an X-Gene v1 PCIe MSI controller node -- reg: physical base address (0x79000000) and length (0x900000) for controller - registers. These registers include the MSI termination address and data - registers as well as the MSI interrupt status registers. -- reg-names: not required -- interrupts: A list of 16 interrupt outputs of the controller, starting from - interrupt number 0x10 to 0x1f. -- interrupt-names: not required - -Each PCIe node needs to have property msi-parent that points to an MSI -controller node - -Examples: - -SoC DTSI: - - + MSI node: - msi@79000000 { - compatible = "apm,xgene1-msi"; - msi-controller; - reg = <0x00 0x79000000 0x0 0x900000>; - interrupts = <0x0 0x10 0x4> - <0x0 0x11 0x4> - <0x0 0x12 0x4> - <0x0 0x13 0x4> - <0x0 0x14 0x4> - <0x0 0x15 0x4> - <0x0 0x16 0x4> - <0x0 0x17 0x4> - <0x0 0x18 0x4> - <0x0 0x19 0x4> - <0x0 0x1a 0x4> - <0x0 0x1b 0x4> - <0x0 0x1c 0x4> - <0x0 0x1d 0x4> - <0x0 0x1e 0x4> - <0x0 0x1f 0x4>; - }; - - + PCIe controller node with msi-parent property pointing to MSI node: - pcie0: pcie@1f2b0000 { - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ - 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; - dma-coherent; - clocks = <&pcie0clk 0>; - msi-parent= <&msi>; - }; diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt deleted file mode 100644 index 92490330dc1c..000000000000 --- a/Documentation/devicetree/bindings/pci/xgene-pci.txt +++ /dev/null @@ -1,50 +0,0 @@ -* AppliedMicro X-Gene PCIe interface - -Required properties: -- device_type: set to "pci" -- compatible: should contain "apm,xgene-pcie" to identify the core. -- reg: A list of physical base address and length for each set of controller - registers. Must contain an entry for each entry in the reg-names - property. -- reg-names: Must include the following entries: - "csr": controller configuration registers. - "cfg": PCIe configuration space registers. -- #address-cells: set to <3> -- #size-cells: set to <2> -- ranges: ranges for the outbound memory, I/O regions. -- dma-ranges: ranges for the inbound memory regions. -- #interrupt-cells: set to <1> -- interrupt-map-mask and interrupt-map: standard PCI properties - to define the mapping of the PCIe interface to interrupt - numbers. -- clocks: from common clock binding: handle to pci clock. - -Optional properties: -- status: Either "ok" or "disabled". -- dma-coherent: Present if DMA operations are coherent - -Example: - - pcie0: pcie@1f2b0000 { - status = "disabled"; - device_type = "pci"; - compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie"; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */ - 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */ - reg-names = "csr", "cfg"; - ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */ - 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */ - dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000 - 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>; - interrupt-map-mask = <0x0 0x0 0x0 0x7>; - interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1 - 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1 - 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1 - 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>; - dma-coherent; - clocks = <&pcie0clk 0>; - }; - diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml index d674a24c8ccc..9823456addea 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml +++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml @@ -76,64 +76,62 @@ unevaluatedProperties: false examples: - | - versal { - #address-cells = <2>; - #size-cells = <2>; - cpm_pcie: pcie@fca10000 { - compatible = "xlnx,versal-cpm-host-1.00"; - device_type = "pci"; - #address-cells = <3>; - #interrupt-cells = <1>; - #size-cells = <2>; - interrupts = <0 72 4>; - interrupt-parent = <&gic>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc_0 0>, - <0 0 0 2 &pcie_intc_0 1>, - <0 0 0 3 &pcie_intc_0 2>, - <0 0 0 4 &pcie_intc_0 3>; - bus-range = <0x00 0xff>; - ranges = <0x02000000 0x0 0xe0010000 0x0 0xe0010000 0x0 0x10000000>, - <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; - msi-map = <0x0 &its_gic 0x0 0x10000>; - reg = <0x0 0xfca10000 0x0 0x1000>, - <0x6 0x00000000 0x0 0x10000000>; - reg-names = "cpm_slcr", "cfg"; - pcie_intc_0: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - - cpm5_pcie: pcie@fcdd0000 { - compatible = "xlnx,versal-cpm5-host"; - device_type = "pci"; - #address-cells = <3>; - #interrupt-cells = <1>; - #size-cells = <2>; - interrupts = <0 72 4>; - interrupt-parent = <&gic>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie_intc_1 0>, - <0 0 0 2 &pcie_intc_1 1>, - <0 0 0 3 &pcie_intc_1 2>, - <0 0 0 4 &pcie_intc_1 3>; - bus-range = <0x00 0xff>; - ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, - <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; - msi-map = <0x0 &its_gic 0x0 0x10000>; - reg = <0x00 0xfcdd0000 0x00 0x1000>, - <0x06 0x00000000 0x00 0x1000000>, - <0x00 0xfce20000 0x00 0x1000000>; - reg-names = "cpm_slcr", "cfg", "cpm_csr"; - - pcie_intc_1: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - }; - }; - + #address-cells = <2>; + #size-cells = <2>; + pcie@fca10000 { + compatible = "xlnx,versal-cpm-host-1.00"; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <0 72 4>; + interrupt-parent = <&gic>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc_0 0>, + <0 0 0 2 &pcie_intc_0 1>, + <0 0 0 3 &pcie_intc_0 2>, + <0 0 0 4 &pcie_intc_0 3>; + bus-range = <0x00 0xff>; + ranges = <0x02000000 0x0 0xe0010000 0x0 0xe0010000 0x0 0x10000000>, + <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; + msi-map = <0x0 &its_gic 0x0 0x10000>; + reg = <0x0 0xfca10000 0x0 0x1000>, + <0x6 0x00000000 0x0 0x10000000>; + reg-names = "cpm_slcr", "cfg"; + pcie_intc_0: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + pcie@fcdd0000 { + compatible = "xlnx,versal-cpm5-host"; + device_type = "pci"; + #address-cells = <3>; + #interrupt-cells = <1>; + #size-cells = <2>; + interrupts = <0 72 4>; + interrupt-parent = <&gic>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie_intc_1 0>, + <0 0 0 2 &pcie_intc_1 1>, + <0 0 0 3 &pcie_intc_1 2>, + <0 0 0 4 &pcie_intc_1 3>; + bus-range = <0x00 0xff>; + ranges = <0x02000000 0x0 0xe0000000 0x0 0xe0000000 0x0 0x10000000>, + <0x43000000 0x80 0x00000000 0x80 0x00000000 0x0 0x80000000>; + msi-map = <0x0 &its_gic 0x0 0x10000>; + reg = <0x00 0xfcdd0000 0x00 0x1000>, + <0x06 0x00000000 0x00 0x1000000>, + <0x00 0xfce20000 0x00 0x1000000>; + reg-names = "cpm_slcr", "cfg", "cpm_csr"; + + pcie_intc_1: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; }; |