diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/ti')
| -rw-r--r-- | Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml | 63 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml | 32 |
2 files changed, 79 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml b/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml new file mode 100644 index 000000000000..a73691cf5624 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/ti/ti,j784s4-bist.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2025 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/ti,j784s4-bist.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 BIST + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +allOf: + - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml# + +description: + The BIST (Built-In Self Test) module is an IP block present in K3 devices + that support triggering of BIST tests, both PBIST (Memory BIST) and LBIST + (Logic BIST) on a core. Both tests are destructive in nature. At boot, BIST + is executed by hardware for the MCU domain automatically as part of HW POST. + +properties: + compatible: + const: ti,j784s4-bist + + reg: + maxItems: 2 + + reg-names: + items: + - const: cfg + - const: ctrl_mmr + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - reg-names + - ti,sci-dev-id + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + safety-selftest@33c0000 { + compatible = "ti,j784s4-bist"; + reg = <0x00 0x033c0000 0x00 0x400>, + <0x00 0x0010c1a0 0x00 0x01c>; + reg-names = "cfg", "ctrl_mmr"; + clocks = <&k3_clks 237 7>; + power-domains = <&k3_pds 237 TI_SCI_PD_EXCLUSIVE>; + ti,sci-dev-id = <234>; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml index 0df41c4f60c1..56b16183c885 100644 --- a/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml +++ b/Documentation/devicetree/bindings/soc/ti/wkup-m3-ipc.yaml @@ -121,13 +121,13 @@ examples: }; wkup_m3_ipc@1324 { - compatible = "ti,am3352-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&am335x_mailbox &mbox_wkupm3>; - ti,vtt-gpio-pin = <7>; - firmware-name = "am335x-evm-scale-data.bin"; + compatible = "ti,am3352-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am335x_mailbox &mbox_wkupm3>; + ti,vtt-gpio-pin = <7>; + firmware-name = "am335x-evm-scale-data.bin"; }; }; @@ -155,20 +155,20 @@ examples: pinctrl-0 = <&ddr3_vtt_toggle_default>; ddr3_vtt_toggle_default: ddr_vtt_toggle_default { - pinctrl-single,pins = < + pinctrl-single,pins = < 0x25C (DS0_PULL_UP_DOWN_EN | PIN_OUTPUT_PULLUP | DS0_FORCE_OFF_MODE | MUX_MODE7) - >; + >; }; }; wkup_m3_ipc@1324 { - compatible = "ti,am4372-wkup-m3-ipc"; - reg = <0x1324 0x24>; - interrupts = <78>; - ti,rproc = <&wkup_m3>; - mboxes = <&am437x_mailbox &mbox_wkupm3>; - ti,set-io-isolation; - firmware-name = "am43x-evm-scale-data.bin"; + compatible = "ti,am4372-wkup-m3-ipc"; + reg = <0x1324 0x24>; + interrupts = <78>; + ti,rproc = <&wkup_m3>; + mboxes = <&am437x_mailbox &mbox_wkupm3>; + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; }; }; |