diff options
Diffstat (limited to 'Documentation/networking/device_drivers/ethernet/intel')
| -rw-r--r-- | Documentation/networking/device_drivers/ethernet/intel/ice.rst | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/Documentation/networking/device_drivers/ethernet/intel/ice.rst b/Documentation/networking/device_drivers/ethernet/intel/ice.rst index 3c46a48d99ba..0bca293cf9cb 100644 --- a/Documentation/networking/device_drivers/ethernet/intel/ice.rst +++ b/Documentation/networking/device_drivers/ethernet/intel/ice.rst @@ -927,6 +927,19 @@ To enable/disable UDP Segmentation Offload, issue the following command:: # ethtool -K <ethX> tx-udp-segmentation [off|on] +PTP pin interface +----------------- +All adapters support standard PTP pin interface. SDPs (Software Definable Pin) +are single ended pins with both periodic output and external timestamp +supported. There are also specific differential input/output pins (TIME_SYNC, +1PPS) with only one of the functions supported. + +There are adapters with DPLL, where pins are connected to the DPLL instead of +being exposed on the board. You have to be aware that in those configurations, +only SDP pins are exposed and each pin has its own fixed direction. +To see input signal on those PTP pins, you need to configure DPLL properly. +Output signal is only visible on DPLL and to send it to the board SMA/U.FL pins, +DPLL output pins have to be manually configured. GNSS module ----------- |